aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/iwl3945-base.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl3945-base.c')
-rw-r--r--drivers/net/wireless/iwlwifi/iwl3945-base.c130
1 files changed, 79 insertions, 51 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 69fda64c650..1a411c2d83e 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -4311,35 +4311,6 @@ static void iwl3945_irq_tasklet(struct iwl3945_priv *priv)
/* Safely ignore these bits for debug checks below */
inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
- /* HW RF KILL switch toggled (4965 only) */
- if (inta & CSR_INT_BIT_RF_KILL) {
- int hw_rf_kill = 0;
- if (!(iwl3945_read32(priv, CSR_GP_CNTRL) &
- CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
- hw_rf_kill = 1;
-
- IWL_DEBUG(IWL_DL_INFO | IWL_DL_RF_KILL | IWL_DL_ISR,
- "RF_KILL bit toggled to %s.\n",
- hw_rf_kill ? "disable radio" : "enable radio");
-
- /* Queue restart only if RF_KILL switch was set to "kill"
- * when we loaded driver, and is now set to "enable".
- * After we're Alive, RF_KILL gets handled by
- * iwl3945_rx_card_state_notif() */
- if (!hw_rf_kill && !test_bit(STATUS_ALIVE, &priv->status)) {
- clear_bit(STATUS_RF_KILL_HW, &priv->status);
- queue_work(priv->workqueue, &priv->restart);
- }
-
- handled |= CSR_INT_BIT_RF_KILL;
- }
-
- /* Chip got too hot and stopped itself (4965 only) */
- if (inta & CSR_INT_BIT_CT_KILL) {
- IWL_ERROR("Microcode CT kill error detected.\n");
- handled |= CSR_INT_BIT_CT_KILL;
- }
-
/* Error detected by uCode */
if (inta & CSR_INT_BIT_SW_ERR) {
IWL_ERROR("Microcode SW error detected. Restarting 0x%X.\n",
@@ -4440,7 +4411,7 @@ static irqreturn_t iwl3945_isr(int irq, void *data)
if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
/* Hardware disappeared */
- IWL_WARNING("HARDWARE GONE?? INTA == 0x%080x\n", inta);
+ IWL_WARNING("HARDWARE GONE?? INTA == 0x%08x\n", inta);
goto unplugged;
}
@@ -4814,17 +4785,33 @@ static int iwl3945_get_channels_for_scan(struct iwl3945_priv *priv,
continue;
}
+ scan_ch->active_dwell = cpu_to_le16(active_dwell);
+ scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+ /* If passive , set up for auto-switch
+ * and use long active_dwell time.
+ */
if (!is_active || is_channel_passive(ch_info) ||
- (channels[i].flags & IEEE80211_CHAN_PASSIVE_SCAN))
+ (channels[i].flags & IEEE80211_CHAN_PASSIVE_SCAN)) {
scan_ch->type = 0; /* passive */
- else
+ if (IWL_UCODE_API(priv->ucode_ver) == 1)
+ scan_ch->active_dwell = cpu_to_le16(passive_dwell - 1);
+ } else {
scan_ch->type = 1; /* active */
+ }
- if ((scan_ch->type & 1) && n_probes)
- scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes);
-
- scan_ch->active_dwell = cpu_to_le16(active_dwell);
- scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+ /* Set direct probe bits. These may be used both for active
+ * scan channels (probes gets sent right away),
+ * or for passive channels (probes get se sent only after
+ * hearing clear Rx packet).*/
+ if (IWL_UCODE_API(priv->ucode_ver) >= 2) {
+ if (n_probes)
+ scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes);
+ } else {
+ /* uCode v1 does not allow setting direct probe bits on
+ * passive channel. */
+ if ((scan_ch->type & 1) && n_probes)
+ scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes);
+ }
/* Set txpower levels to defaults */
scan_ch->tpc.dsp_atten = 110;
@@ -5325,25 +5312,41 @@ static void iwl3945_nic_start(struct iwl3945_priv *priv)
static int iwl3945_read_ucode(struct iwl3945_priv *priv)
{
struct iwl3945_ucode *ucode;
- int ret = 0;
+ int ret = -EINVAL, index;
const struct firmware *ucode_raw;
/* firmware file name contains uCode/driver compatibility version */
- const char *name = priv->cfg->fw_name;
+ const char *name_pre = priv->cfg->fw_name_pre;
+ const unsigned int api_max = priv->cfg->ucode_api_max;
+ const unsigned int api_min = priv->cfg->ucode_api_min;
+ char buf[25];
u8 *src;
size_t len;
- u32 ver, inst_size, data_size, init_size, init_data_size, boot_size;
+ u32 api_ver, inst_size, data_size, init_size, init_data_size, boot_size;
/* Ask kernel firmware_class module to get the boot firmware off disk.
* request_firmware() is synchronous, file is in memory on return. */
- ret = request_firmware(&ucode_raw, name, &priv->pci_dev->dev);
- if (ret < 0) {
- IWL_ERROR("%s firmware file req failed: Reason %d\n",
- name, ret);
- goto error;
+ for (index = api_max; index >= api_min; index--) {
+ sprintf(buf, "%s%u%s", name_pre, index, ".ucode");
+ ret = request_firmware(&ucode_raw, buf, &priv->pci_dev->dev);
+ if (ret < 0) {
+ IWL_ERROR("%s firmware file req failed: Reason %d\n",
+ buf, ret);
+ if (ret == -ENOENT)
+ continue;
+ else
+ goto error;
+ } else {
+ if (index < api_max)
+ IWL_ERROR("Loaded firmware %s, which is deprecated. Please use API v%u instead.\n",
+ buf, api_max);
+ IWL_DEBUG_INFO("Got firmware '%s' file (%zd bytes) from disk\n",
+ buf, ucode_raw->size);
+ break;
+ }
}
- IWL_DEBUG_INFO("Got firmware '%s' file (%zd bytes) from disk\n",
- name, ucode_raw->size);
+ if (ret < 0)
+ goto error;
/* Make sure that we got at least our header! */
if (ucode_raw->size < sizeof(*ucode)) {
@@ -5355,20 +5358,46 @@ static int iwl3945_read_ucode(struct iwl3945_priv *priv)
/* Data from ucode file: header followed by uCode images */
ucode = (void *)ucode_raw->data;
- ver = le32_to_cpu(ucode->ver);
+ priv->ucode_ver = le32_to_cpu(ucode->ver);
+ api_ver = IWL_UCODE_API(priv->ucode_ver);
inst_size = le32_to_cpu(ucode->inst_size);
data_size = le32_to_cpu(ucode->data_size);
init_size = le32_to_cpu(ucode->init_size);
init_data_size = le32_to_cpu(ucode->init_data_size);
boot_size = le32_to_cpu(ucode->boot_size);
- IWL_DEBUG_INFO("f/w package hdr ucode version = 0x%x\n", ver);
+ /* api_ver should match the api version forming part of the
+ * firmware filename ... but we don't check for that and only rely
+ * on the API version read from firware header from here on forward */
+
+ if (api_ver < api_min || api_ver > api_max) {
+ IWL_ERROR("Driver unable to support your firmware API. "
+ "Driver supports v%u, firmware is v%u.\n",
+ api_max, api_ver);
+ priv->ucode_ver = 0;
+ ret = -EINVAL;
+ goto err_release;
+ }
+ if (api_ver != api_max)
+ IWL_ERROR("Firmware has old API version. Expected %u, "
+ "got %u. New firmware can be obtained "
+ "from http://www.intellinuxwireless.org.\n",
+ api_max, api_ver);
+
+ printk(KERN_INFO DRV_NAME " loaded firmware version %u.%u.%u.%u\n",
+ IWL_UCODE_MAJOR(priv->ucode_ver),
+ IWL_UCODE_MINOR(priv->ucode_ver),
+ IWL_UCODE_API(priv->ucode_ver),
+ IWL_UCODE_SERIAL(priv->ucode_ver));
+ IWL_DEBUG_INFO("f/w package hdr ucode version raw = 0x%x\n",
+ priv->ucode_ver);
IWL_DEBUG_INFO("f/w package hdr runtime inst size = %u\n", inst_size);
IWL_DEBUG_INFO("f/w package hdr runtime data size = %u\n", data_size);
IWL_DEBUG_INFO("f/w package hdr init inst size = %u\n", init_size);
IWL_DEBUG_INFO("f/w package hdr init data size = %u\n", init_data_size);
IWL_DEBUG_INFO("f/w package hdr boot inst size = %u\n", boot_size);
+
/* Verify size of file vs. image size info in file's header */
if (ucode_raw->size < sizeof(*ucode) +
inst_size + data_size + init_size +
@@ -7843,7 +7872,6 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
IEEE80211_HW_NOISE_DBM;
hw->wiphy->interface_modes =
- BIT(NL80211_IFTYPE_AP) |
BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC);
@@ -8328,7 +8356,7 @@ static void __exit iwl3945_exit(void)
iwl3945_rate_control_unregister();
}
-MODULE_FIRMWARE("iwlwifi-3945" IWL3945_UCODE_API ".ucode");
+MODULE_FIRMWARE(IWL3945_MODULE_FIRMWARE(IWL3945_UCODE_API_MAX));
module_param_named(antenna, iwl3945_param_antenna, int, 0444);
MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 22:02:58 +0000