aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/iwl3945-base.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl3945-base.c')
-rw-r--r--drivers/net/wireless/iwlwifi/iwl3945-base.c272
1 files changed, 159 insertions, 113 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 3344841b766..69fda64c650 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -519,7 +519,7 @@ static inline int iwl3945_is_ready_rf(struct iwl3945_priv *priv)
/*************** HOST COMMAND QUEUE FUNCTIONS *****/
-#define IWL_CMD(x) case x : return #x
+#define IWL_CMD(x) case x: return #x
static const char *get_cmd_string(u8 cmd)
{
@@ -1425,9 +1425,9 @@ static u8 iwl3945_rate_get_lowest_plcp(struct iwl3945_priv *priv)
/* Set rate mask*/
if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK)
- rate_mask = priv->active_rate_basic & 0xF;
+ rate_mask = priv->active_rate_basic & IWL_CCK_RATES_MASK;
else
- rate_mask = priv->active_rate_basic & 0xFF0;
+ rate_mask = priv->active_rate_basic & IWL_OFDM_RATES_MASK;
for (i = IWL_RATE_1M_INDEX; i != IWL_RATE_INVALID;
i = iwl3945_rates[i].next_ieee) {
@@ -4320,7 +4320,7 @@ static void iwl3945_irq_tasklet(struct iwl3945_priv *priv)
IWL_DEBUG(IWL_DL_INFO | IWL_DL_RF_KILL | IWL_DL_ISR,
"RF_KILL bit toggled to %s.\n",
- hw_rf_kill ? "disable radio":"enable radio");
+ hw_rf_kill ? "disable radio" : "enable radio");
/* Queue restart only if RF_KILL switch was set to "kill"
* when we loaded driver, and is now set to "enable".
@@ -5996,24 +5996,6 @@ static void iwl3945_bg_rf_kill(struct work_struct *work)
iwl3945_rfkill_set_hw_state(priv);
}
-static void iwl3945_bg_set_monitor(struct work_struct *work)
-{
- struct iwl3945_priv *priv = container_of(work,
- struct iwl3945_priv, set_monitor);
-
- IWL_DEBUG(IWL_DL_STATE, "setting monitor mode\n");
-
- mutex_lock(&priv->mutex);
-
- if (!iwl3945_is_ready(priv))
- IWL_DEBUG(IWL_DL_STATE, "leave - not ready\n");
- else
- if (iwl3945_set_mode(priv, NL80211_IFTYPE_MONITOR) != 0)
- IWL_ERROR("iwl3945_set_mode() failed\n");
-
- mutex_unlock(&priv->mutex);
-}
-
#define IWL_SCAN_CHECK_WATCHDOG (7 * HZ)
static void iwl3945_bg_scan_check(struct work_struct *data)
@@ -6339,10 +6321,7 @@ static void iwl3945_post_associate(struct iwl3945_priv *priv)
case NL80211_IFTYPE_ADHOC:
- /* clear out the station table */
- iwl3945_clear_stations_table(priv);
-
- iwl3945_add_station(priv, iwl3945_broadcast_addr, 0, 0);
+ priv->assoc_id = 1;
iwl3945_add_station(priv, priv->bssid, 0, 0);
iwl3945_sync_sta(priv, IWL_STA_ID,
(priv->band == IEEE80211_BAND_5GHZ) ?
@@ -6830,16 +6809,43 @@ static void iwl3945_configure_filter(struct ieee80211_hw *hw,
int mc_count, struct dev_addr_list *mc_list)
{
struct iwl3945_priv *priv = hw->priv;
+ __le32 *filter_flags = &priv->staging_rxon.filter_flags;
+
+ IWL_DEBUG_MAC80211("Enter: changed: 0x%x, total: 0x%x\n",
+ changed_flags, *total_flags);
- if (changed_flags & (*total_flags) & FIF_OTHER_BSS) {
- IWL_DEBUG_MAC80211("Enter: type %d (0x%x, 0x%x)\n",
- NL80211_IFTYPE_MONITOR,
- changed_flags, *total_flags);
- /* queue work 'cuz mac80211 is holding a lock which
- * prevents us from issuing (synchronous) f/w cmds */
- queue_work(priv->workqueue, &priv->set_monitor);
+ if (changed_flags & (FIF_OTHER_BSS | FIF_PROMISC_IN_BSS)) {
+ if (*total_flags & (FIF_OTHER_BSS | FIF_PROMISC_IN_BSS))
+ *filter_flags |= RXON_FILTER_PROMISC_MSK;
+ else
+ *filter_flags &= ~RXON_FILTER_PROMISC_MSK;
+ }
+ if (changed_flags & FIF_ALLMULTI) {
+ if (*total_flags & FIF_ALLMULTI)
+ *filter_flags |= RXON_FILTER_ACCEPT_GRP_MSK;
+ else
+ *filter_flags &= ~RXON_FILTER_ACCEPT_GRP_MSK;
}
- *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI |
+ if (changed_flags & FIF_CONTROL) {
+ if (*total_flags & FIF_CONTROL)
+ *filter_flags |= RXON_FILTER_CTL2HOST_MSK;
+ else
+ *filter_flags &= ~RXON_FILTER_CTL2HOST_MSK;
+ }
+ if (changed_flags & FIF_BCN_PRBRESP_PROMISC) {
+ if (*total_flags & FIF_BCN_PRBRESP_PROMISC)
+ *filter_flags |= RXON_FILTER_BCON_AWARE_MSK;
+ else
+ *filter_flags &= ~RXON_FILTER_BCON_AWARE_MSK;
+ }
+
+ /* We avoid iwl_commit_rxon here to commit the new filter flags
+ * since mac80211 will call ieee80211_hw_config immediately.
+ * (mc_list is not supported at this time). Otherwise, we need to
+ * queue a background iwl_commit_rxon work.
+ */
+
+ *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS |
FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
}
@@ -7715,7 +7721,6 @@ static void iwl3945_setup_deferred_work(struct iwl3945_priv *priv)
INIT_WORK(&priv->abort_scan, iwl3945_bg_abort_scan);
INIT_WORK(&priv->rf_kill, iwl3945_bg_rf_kill);
INIT_WORK(&priv->beacon_update, iwl3945_bg_beacon_update);
- INIT_WORK(&priv->set_monitor, iwl3945_bg_set_monitor);
INIT_DELAYED_WORK(&priv->init_alive_start, iwl3945_bg_init_alive_start);
INIT_DELAYED_WORK(&priv->alive_start, iwl3945_bg_alive_start);
INIT_DELAYED_WORK(&priv->scan_check, iwl3945_bg_scan_check);
@@ -7787,6 +7792,10 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
struct iwl_3945_cfg *cfg = (struct iwl_3945_cfg *)(ent->driver_data);
unsigned long flags;
+ /***********************
+ * 1. Allocating HW data
+ * ********************/
+
/* Disabling hardware scan means that mac80211 will perform scans
* "the hard way", rather than using device's scan. */
if (iwl3945_param_disable_hw_scan) {
@@ -7810,27 +7819,24 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
err = -ENOMEM;
goto out;
}
- SET_IEEE80211_DEV(hw, &pdev->dev);
- hw->rate_control_algorithm = "iwl-3945-rs";
- hw->sta_data_size = sizeof(struct iwl3945_sta_priv);
+ SET_IEEE80211_DEV(hw, &pdev->dev);
- IWL_DEBUG_INFO("*** LOAD DRIVER ***\n");
priv = hw->priv;
priv->hw = hw;
-
priv->pci_dev = pdev;
priv->cfg = cfg;
+ IWL_DEBUG_INFO("*** LOAD DRIVER ***\n");
+ hw->rate_control_algorithm = "iwl-3945-rs";
+ hw->sta_data_size = sizeof(struct iwl3945_sta_priv);
+
/* Select antenna (may be helpful if only one antenna is connected) */
priv->antenna = (enum iwl3945_antenna)iwl3945_param_antenna;
#ifdef CONFIG_IWL3945_DEBUG
iwl3945_debug_level = iwl3945_param_debug;
atomic_set(&priv->restrict_refcnt, 0);
#endif
- priv->retry_rate = 1;
-
- priv->ibss_beacon = NULL;
/* Tell mac80211 our characteristics */
hw->flags = IEEE80211_HW_SIGNAL_DBM |
@@ -7841,17 +7847,14 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC);
+ hw->wiphy->fw_handles_regulatory = true;
+
/* 4 EDCA QOS priorities */
hw->queues = 4;
- spin_lock_init(&priv->lock);
- spin_lock_init(&priv->power_data.lock);
- spin_lock_init(&priv->sta_lock);
- spin_lock_init(&priv->hcmd_lock);
-
- INIT_LIST_HEAD(&priv->free_frames);
-
- mutex_init(&priv->mutex);
+ /***************************
+ * 2. Initializing PCI bus
+ * *************************/
if (pci_enable_device(pdev)) {
err = -ENODEV;
goto out_ieee80211_free_hw;
@@ -7859,14 +7862,6 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
pci_set_master(pdev);
- /* Clear the driver's (not device's) station table */
- iwl3945_clear_stations_table(priv);
-
- priv->data_retry_limit = -1;
- priv->ieee_channels = NULL;
- priv->ieee_rates = NULL;
- priv->band = IEEE80211_BAND_2GHZ;
-
err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (!err)
err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
@@ -7880,10 +7875,9 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
if (err)
goto out_pci_disable_device;
- /* We disable the RETRY_TIMEOUT register (0x41) to keep
- * PCI Tx retries from interfering with C3 CPU state */
- pci_write_config_byte(pdev, 0x41, 0x00);
-
+ /***********************
+ * 3. Read REV Register
+ * ********************/
priv->hw_base = pci_iomap(pdev, 0, 0);
if (!priv->hw_base) {
err = -ENODEV;
@@ -7894,25 +7888,70 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
(unsigned long long) pci_resource_len(pdev, 0));
IWL_DEBUG_INFO("pci_resource_base = %p\n", priv->hw_base);
- /* Initialize module parameter values here */
+ /* We disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state */
+ pci_write_config_byte(pdev, 0x41, 0x00);
- /* Disable radio (SW RF KILL) via parameter when loading driver */
- if (iwl3945_param_disable) {
- set_bit(STATUS_RF_KILL_SW, &priv->status);
- IWL_DEBUG_INFO("Radio disabled.\n");
- }
+ /* nic init */
+ iwl3945_set_bit(priv, CSR_GIO_CHICKEN_BITS,
+ CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
- priv->iw_mode = NL80211_IFTYPE_STATION;
+ iwl3945_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+ err = iwl3945_poll_bit(priv, CSR_GP_CNTRL,
+ CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
+ CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
+ if (err < 0) {
+ IWL_DEBUG_INFO("Failed to init the card\n");
+ goto out_remove_sysfs;
+ }
- printk(KERN_INFO DRV_NAME
- ": Detected Intel Wireless WiFi Link %s\n", priv->cfg->name);
+ /***********************
+ * 4. Read EEPROM
+ * ********************/
+ /* Read the EEPROM */
+ err = iwl3945_eeprom_init(priv);
+ if (err) {
+ IWL_ERROR("Unable to init EEPROM\n");
+ goto out_remove_sysfs;
+ }
+ /* MAC Address location in EEPROM same for 3945/4965 */
+ get_eeprom_mac(priv, priv->mac_addr);
+ IWL_DEBUG_INFO("MAC address: %pM\n", priv->mac_addr);
+ SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);
+ /***********************
+ * 5. Setup HW Constants
+ * ********************/
/* Device-specific setup */
if (iwl3945_hw_set_hw_setting(priv)) {
IWL_ERROR("failed to set hw settings\n");
goto out_iounmap;
}
+ /***********************
+ * 6. Setup priv
+ * ********************/
+ priv->retry_rate = 1;
+ priv->ibss_beacon = NULL;
+
+ spin_lock_init(&priv->lock);
+ spin_lock_init(&priv->power_data.lock);
+ spin_lock_init(&priv->sta_lock);
+ spin_lock_init(&priv->hcmd_lock);
+
+ INIT_LIST_HEAD(&priv->free_frames);
+ mutex_init(&priv->mutex);
+
+ /* Clear the driver's (not device's) station table */
+ iwl3945_clear_stations_table(priv);
+
+ priv->data_retry_limit = -1;
+ priv->ieee_channels = NULL;
+ priv->ieee_rates = NULL;
+ priv->band = IEEE80211_BAND_2GHZ;
+
+ priv->iw_mode = NL80211_IFTYPE_STATION;
+
if (iwl3945_param_qos_enable)
priv->qos_data.qos_enable = 1;
@@ -7921,70 +7960,76 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
priv->qos_data.qos_active = 0;
priv->qos_data.qos_cap.val = 0;
- iwl3945_set_rxon_channel(priv, IEEE80211_BAND_2GHZ, 6);
- iwl3945_setup_deferred_work(priv);
- iwl3945_setup_rx_handlers(priv);
priv->rates_mask = IWL_RATES_MASK;
/* If power management is turned on, default to AC mode */
priv->power_mode = IWL_POWER_AC;
priv->user_txpower_limit = IWL_DEFAULT_TX_POWER;
- spin_lock_irqsave(&priv->lock, flags);
- iwl3945_disable_interrupts(priv);
- spin_unlock_irqrestore(&priv->lock, flags);
-
- err = sysfs_create_group(&pdev->dev.kobj, &iwl3945_attribute_group);
+ err = iwl3945_init_channel_map(priv);
if (err) {
- IWL_ERROR("failed to create sysfs device attributes\n");
+ IWL_ERROR("initializing regulatory failed: %d\n", err);
goto out_release_irq;
}
- /* nic init */
- iwl3945_set_bit(priv, CSR_GIO_CHICKEN_BITS,
- CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
-
- iwl3945_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
- err = iwl3945_poll_bit(priv, CSR_GP_CNTRL,
- CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
- CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
- if (err < 0) {
- IWL_DEBUG_INFO("Failed to init the card\n");
- goto out_remove_sysfs;
- }
- /* Read the EEPROM */
- err = iwl3945_eeprom_init(priv);
+ err = iwl3945_init_geos(priv);
if (err) {
- IWL_ERROR("Unable to init EEPROM\n");
- goto out_remove_sysfs;
+ IWL_ERROR("initializing geos failed: %d\n", err);
+ goto out_free_channel_map;
}
- /* MAC Address location in EEPROM same for 3945/4965 */
- get_eeprom_mac(priv, priv->mac_addr);
- IWL_DEBUG_INFO("MAC address: %pM\n", priv->mac_addr);
- SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);
- err = iwl3945_init_channel_map(priv);
- if (err) {
- IWL_ERROR("initializing regulatory failed: %d\n", err);
- goto out_remove_sysfs;
+ printk(KERN_INFO DRV_NAME
+ ": Detected Intel Wireless WiFi Link %s\n", priv->cfg->name);
+
+ /***********************************
+ * 7. Initialize Module Parameters
+ * **********************************/
+
+ /* Initialize module parameter values here */
+ /* Disable radio (SW RF KILL) via parameter when loading driver */
+ if (iwl3945_param_disable) {
+ set_bit(STATUS_RF_KILL_SW, &priv->status);
+ IWL_DEBUG_INFO("Radio disabled.\n");
}
- err = iwl3945_init_geos(priv);
+
+ /***********************
+ * 8. Setup Services
+ * ********************/
+
+ spin_lock_irqsave(&priv->lock, flags);
+ iwl3945_disable_interrupts(priv);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ err = sysfs_create_group(&pdev->dev.kobj, &iwl3945_attribute_group);
if (err) {
- IWL_ERROR("initializing geos failed: %d\n", err);
- goto out_free_channel_map;
+ IWL_ERROR("failed to create sysfs device attributes\n");
+ goto out_free_geos;
}
+ iwl3945_set_rxon_channel(priv, IEEE80211_BAND_2GHZ, 6);
+ iwl3945_setup_deferred_work(priv);
+ iwl3945_setup_rx_handlers(priv);
+
+ /***********************
+ * 9. Conclude
+ * ********************/
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+
+ /*********************************
+ * 10. Setup and Register mac80211
+ * *******************************/
+
err = ieee80211_register_hw(priv->hw);
if (err) {
IWL_ERROR("Failed to register network device (error %d)\n", err);
- goto out_free_geos;
+ goto out_remove_sysfs;
}
priv->hw->conf.beacon_int = 100;
priv->mac80211_registered = 1;
- pci_save_state(pdev);
- pci_disable_device(pdev);
+
err = iwl3945_rfkill_init(priv);
if (err)
@@ -7993,12 +8038,13 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
return 0;
+ out_remove_sysfs:
+ sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
out_free_geos:
iwl3945_free_geos(priv);
out_free_channel_map:
iwl3945_free_channel_map(priv);
- out_remove_sysfs:
- sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
+
out_release_irq:
destroy_workqueue(priv->workqueue);