diff options
Diffstat (limited to 'drivers/net/wireless/libertas/host.h')
| -rw-r--r-- | drivers/net/wireless/libertas/host.h | 87 |
1 files changed, 11 insertions, 76 deletions
diff --git a/drivers/net/wireless/libertas/host.h b/drivers/net/wireless/libertas/host.h index 12d5dd9af40..c6b44c83159 100644 --- a/drivers/net/wireless/libertas/host.h +++ b/drivers/net/wireless/libertas/host.h @@ -22,7 +22,17 @@ #define CMD_OPTION_WAITFORRSP 0x0002 -/** Host command ID */ +/** Host command IDs */ + +/* Return command are almost always the same as the host command, but with + * bit 15 set high. There are a few exceptions, though... + */ +#define CMD_RET(cmd) (0x8000 | cmd) + +/* Return command convention exceptions: */ +#define CMD_RET_802_11_ASSOCIATE 0x8012 + +/* Command codes */ #define CMD_CODE_DNLD 0x0002 #define CMD_GET_HW_SPEC 0x0003 #define CMD_EEPROM_UPDATE 0x0004 @@ -97,13 +107,10 @@ #define CMD_GET_TSF 0x0080 #define CMD_BT_ACCESS 0x0087 -#define CMD_RET_BT_ACCESS 0x8087 #define CMD_FWT_ACCESS 0x0095 -#define CMD_RET_FWT_ACCESS 0x8095 #define CMD_MESH_ACCESS 0x009b -#define CMD_RET_MESH_ACCESS 0x809b /* For the IEEE Power Save */ #define CMD_SUBCMD_ENTER_PS 0x0030 @@ -112,46 +119,6 @@ #define CMD_SUBCMD_FULL_POWERDOWN 0x0035 #define CMD_SUBCMD_FULL_POWERUP 0x0036 -/* command RET code, MSB is set to 1 */ -#define CMD_RET_HW_SPEC_INFO 0x8003 -#define CMD_RET_EEPROM_UPDATE 0x8004 -#define CMD_RET_802_11_RESET 0x8005 -#define CMD_RET_802_11_SCAN 0x8006 -#define CMD_RET_802_11_GET_LOG 0x800b -#define CMD_RET_MAC_CONTROL 0x8028 -#define CMD_RET_MAC_MULTICAST_ADR 0x8010 -#define CMD_RET_802_11_AUTHENTICATE 0x8011 -#define CMD_RET_802_11_DEAUTHENTICATE 0x8024 -#define CMD_RET_802_11_ASSOCIATE 0x8012 -#define CMD_RET_802_11_REASSOCIATE 0x8025 -#define CMD_RET_802_11_DISASSOCIATE 0x8026 -#define CMD_RET_802_11_SET_WEP 0x8013 -#define CMD_RET_802_11_STAT 0x8014 -#define CMD_RET_802_3_STAT 0x8015 -#define CMD_RET_802_11_SNMP_MIB 0x8016 -#define CMD_RET_MAC_REG_MAP 0x8017 -#define CMD_RET_BBP_REG_MAP 0x8018 -#define CMD_RET_RF_REG_MAP 0x8023 -#define CMD_RET_MAC_REG_ACCESS 0x8019 -#define CMD_RET_BBP_REG_ACCESS 0x801a -#define CMD_RET_RF_REG_ACCESS 0x801b -#define CMD_RET_802_11_RADIO_CONTROL 0x801c -#define CMD_RET_802_11_RF_CHANNEL 0x801d -#define CMD_RET_802_11_RSSI 0x801f -#define CMD_RET_802_11_RF_TX_POWER 0x801e -#define CMD_RET_802_11_RF_ANTENNA 0x8020 -#define CMD_RET_802_11_PS_MODE 0x8021 -#define CMD_RET_802_11_DATA_RATE 0x8022 - -#define CMD_RET_802_11_AD_HOC_START 0x802B -#define CMD_RET_802_11_AD_HOC_JOIN 0x802C - -#define CMD_RET_802_11_QUERY_TKIP_REPLY_CNTRS 0x802e -#define CMD_RET_802_11_ENABLE_RSN 0x802f -#define CMD_RET_802_11_PAIRWISE_TSC 0x8036 -#define CMD_RET_802_11_GROUP_TSC 0x8037 -#define CMD_RET_802_11_KEY_MATERIAL 0x805e - #define CMD_ENABLE_RSN 0x0001 #define CMD_DISABLE_RSN 0x0000 @@ -162,38 +129,6 @@ #define CMD_ACT_SET_AES (CMD_ACT_SET + 2) #define CMD_ACT_REMOVE_AES (CMD_ACT_SET + 3) -#define CMD_RET_802_11_SET_AFC 0x803c -#define CMD_RET_802_11_GET_AFC 0x803d - -#define CMD_RET_802_11_AD_HOC_STOP 0x8040 - -#define CMD_RET_802_11_BEACON_STOP 0x8049 - -#define CMD_RET_802_11_MAC_ADDRESS 0x804D -#define CMD_RET_802_11_EEPROM_ACCESS 0x8059 - -#define CMD_RET_802_11_BAND_CONFIG 0x8058 - -#define CMD_RET_802_11_SLEEP_PARAMS 0x8066 - -#define CMD_RET_802_11_INACTIVITY_TIMEOUT 0x8067 - -#define CMD_RET_802_11D_DOMAIN_INFO (0x8000 | \ - CMD_802_11D_DOMAIN_INFO) - -#define CMD_RET_802_11_TPC_CFG (CMD_802_11_TPC_CFG | 0x8000) -#define CMD_RET_802_11_PWR_CFG (CMD_802_11_PWR_CFG | 0x8000) - -#define CMD_RET_802_11_LED_GPIO_CTRL 0x804e - -#define CMD_RET_802_11_SUBSCRIBE_EVENT (CMD_802_11_SUBSCRIBE_EVENT | 0x8000) - -#define CMD_RET_802_11_RATE_ADAPT_RATESET (CMD_802_11_RATE_ADAPT_RATESET | 0x8000) - -#define CMD_RTE_802_11_TX_RATE_QUERY (CMD_802_11_TX_RATE_QUERY | 0x8000) - -#define CMD_RET_GET_TSF 0x8080 - /* Define action or option for CMD_802_11_SET_WEP */ #define CMD_ACT_ADD 0x0002 #define CMD_ACT_REMOVE 0x0004 |