diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2x00config.c')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2x00config.c | 163 |
1 files changed, 85 insertions, 78 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index 07adc576db4..69959124d25 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -1,5 +1,5 @@ /* - Copyright (C) 2004 - 2007 rt2x00 SourceForge Project + Copyright (C) 2004 - 2008 rt2x00 SourceForge Project <http://rt2x00.serialmonkey.com> This program is free software; you can redistribute it and/or modify @@ -29,64 +29,89 @@ #include "rt2x00.h" #include "rt2x00lib.h" - -/* - * The MAC and BSSID addressess are simple array of bytes, - * these arrays are little endian, so when sending the addressess - * to the drivers, copy the it into a endian-signed variable. - * - * Note that all devices (except rt2500usb) have 32 bits - * register word sizes. This means that whatever variable we - * pass _must_ be a multiple of 32 bits. Otherwise the device - * might not accept what we are sending to it. - * This will also make it easier for the driver to write - * the data to the device. - * - * Also note that when NULL is passed as address the - * we will send 00:00:00:00:00 to the device to clear the address. - * This will prevent the device being confused when it wants - * to ACK frames or consideres itself associated. - */ -void rt2x00lib_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *mac) -{ - __le32 reg[2]; - - memset(®, 0, sizeof(reg)); - if (mac) - memcpy(®, mac, ETH_ALEN); - - rt2x00dev->ops->lib->config_mac_addr(rt2x00dev, ®[0]); -} - -void rt2x00lib_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid) +void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev, + struct rt2x00_intf *intf, + enum ieee80211_if_types type, + u8 *mac, u8 *bssid) { - __le32 reg[2]; - - memset(®, 0, sizeof(reg)); - if (bssid) - memcpy(®, bssid, ETH_ALEN); - - rt2x00dev->ops->lib->config_bssid(rt2x00dev, ®[0]); -} + struct rt2x00intf_conf conf; + unsigned int flags = 0; -void rt2x00lib_config_type(struct rt2x00_dev *rt2x00dev, const int type) -{ - int tsf_sync; + conf.type = type; switch (type) { case IEEE80211_IF_TYPE_IBSS: case IEEE80211_IF_TYPE_AP: - tsf_sync = TSF_SYNC_BEACON; + conf.sync = TSF_SYNC_BEACON; break; case IEEE80211_IF_TYPE_STA: - tsf_sync = TSF_SYNC_INFRA; + conf.sync = TSF_SYNC_INFRA; break; default: - tsf_sync = TSF_SYNC_NONE; + conf.sync = TSF_SYNC_NONE; break; } - rt2x00dev->ops->lib->config_type(rt2x00dev, type, tsf_sync); + /* + * Note that when NULL is passed as address we will send + * 00:00:00:00:00 to the device to clear the address. + * This will prevent the device being confused when it wants + * to ACK frames or consideres itself associated. + */ + memset(&conf.mac, 0, sizeof(conf.mac)); + if (mac) + memcpy(&conf.mac, mac, ETH_ALEN); + + memset(&conf.bssid, 0, sizeof(conf.bssid)); + if (bssid) + memcpy(&conf.bssid, bssid, ETH_ALEN); + + flags |= CONFIG_UPDATE_TYPE; + if (mac || (!rt2x00dev->intf_ap_count && !rt2x00dev->intf_sta_count)) + flags |= CONFIG_UPDATE_MAC; + if (bssid || (!rt2x00dev->intf_ap_count && !rt2x00dev->intf_sta_count)) + flags |= CONFIG_UPDATE_BSSID; + + rt2x00dev->ops->lib->config_intf(rt2x00dev, intf, &conf, flags); +} + +void rt2x00lib_config_preamble(struct rt2x00_dev *rt2x00dev, + struct rt2x00_intf *intf, + const unsigned int short_preamble) +{ + int retval; + int ack_timeout; + int ack_consume_time; + + ack_timeout = PLCP + get_duration(ACK_SIZE, 10); + ack_consume_time = SIFS + PLCP + get_duration(ACK_SIZE, 10); + + if (rt2x00dev->hw->conf.flags & IEEE80211_CONF_SHORT_SLOT_TIME) + ack_timeout += SHORT_DIFS; + else + ack_timeout += DIFS; + + if (short_preamble) { + ack_timeout += SHORT_PREAMBLE; + ack_consume_time += SHORT_PREAMBLE; + } else { + ack_timeout += PREAMBLE; + ack_consume_time += PREAMBLE; + } + + retval = rt2x00dev->ops->lib->config_preamble(rt2x00dev, + short_preamble, + ack_timeout, + ack_consume_time); + + spin_lock(&intf->lock); + + if (retval) { + intf->delayed_flags |= DELAYED_CONFIG_PREAMBLE; + queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->intf_work); + } + + spin_unlock(&intf->lock); } void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, @@ -113,7 +138,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, * The latter is required since we need to recalibrate the * noise-sensitivity ratio for the new setup. */ - rt2x00dev->ops->lib->config(rt2x00dev, CONFIG_UPDATE_ANTENNA, &libconf); + rt2x00dev->ops->lib->config(rt2x00dev, &libconf, CONFIG_UPDATE_ANTENNA); rt2x00lib_reset_link_tuner(rt2x00dev); rt2x00dev->link.ant.active.rx = libconf.ant.rx; @@ -127,7 +152,7 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, struct ieee80211_conf *conf, const int force_config) { struct rt2x00lib_conf libconf; - struct ieee80211_hw_mode *mode; + struct ieee80211_supported_band *band; struct ieee80211_rate *rate; struct antenna_setup *default_ant = &rt2x00dev->default_ant; struct antenna_setup *active_ant = &rt2x00dev->link.ant.active; @@ -147,9 +172,9 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, * Check which configuration options have been * updated and should be send to the device. */ - if (rt2x00dev->rx_status.phymode != conf->phymode) + if (rt2x00dev->rx_status.band != conf->channel->band) flags |= CONFIG_UPDATE_PHYMODE; - if (rt2x00dev->rx_status.channel != conf->channel) + if (rt2x00dev->rx_status.freq != conf->channel->center_freq) flags |= CONFIG_UPDATE_CHANNEL; if (rt2x00dev->tx_power != conf->power_level) flags |= CONFIG_UPDATE_TXPOWER; @@ -204,33 +229,16 @@ config: memset(&libconf, 0, sizeof(libconf)); if (flags & CONFIG_UPDATE_PHYMODE) { - switch (conf->phymode) { - case MODE_IEEE80211A: - libconf.phymode = HWMODE_A; - break; - case MODE_IEEE80211B: - libconf.phymode = HWMODE_B; - break; - case MODE_IEEE80211G: - libconf.phymode = HWMODE_G; - break; - default: - ERROR(rt2x00dev, - "Attempt to configure unsupported mode (%d)" - "Defaulting to 802.11b", conf->phymode); - libconf.phymode = HWMODE_B; - } - - mode = &rt2x00dev->hwmodes[libconf.phymode]; - rate = &mode->rates[mode->num_rates - 1]; - - libconf.basic_rates = - DEVICE_GET_RATE_FIELD(rate->val, RATEMASK) & DEV_BASIC_RATEMASK; + band = &rt2x00dev->bands[conf->channel->band]; + rate = &band->bitrates[band->n_bitrates - 1]; + + libconf.band = conf->channel->band; + libconf.basic_rates = rt2x00_get_rate(rate->hw_value)->ratemask; } if (flags & CONFIG_UPDATE_CHANNEL) { memcpy(&libconf.rf, - &rt2x00dev->spec.channels[conf->channel_val], + &rt2x00dev->spec.channels[conf->channel->hw_value], sizeof(libconf.rf)); } @@ -266,7 +274,7 @@ config: /* * Start configuration. */ - rt2x00dev->ops->lib->config(rt2x00dev, flags, &libconf); + rt2x00dev->ops->lib->config(rt2x00dev, &libconf, flags); /* * Some configuration changes affect the link quality @@ -276,12 +284,11 @@ config: rt2x00lib_reset_link_tuner(rt2x00dev); if (flags & CONFIG_UPDATE_PHYMODE) { - rt2x00dev->curr_hwmode = libconf.phymode; - rt2x00dev->rx_status.phymode = conf->phymode; + rt2x00dev->curr_band = conf->channel->band; + rt2x00dev->rx_status.band = conf->channel->band; } - rt2x00dev->rx_status.freq = conf->freq; - rt2x00dev->rx_status.channel = conf->channel; + rt2x00dev->rx_status.freq = conf->channel->center_freq; rt2x00dev->tx_power = conf->power_level; if (flags & CONFIG_UPDATE_ANTENNA) { |