diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt61pci.c')
-rw-r--r-- | drivers/net/wireless/rt2x00/rt61pci.c | 169 |
1 files changed, 95 insertions, 74 deletions
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index b5ab771bbac..b432cc21d24 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -271,63 +271,60 @@ static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev) /* * Configuration handlers. */ -static void rt61pci_config_mac_addr(struct rt2x00_dev *rt2x00dev, __le32 *mac) +static void rt61pci_config_intf(struct rt2x00_dev *rt2x00dev, + struct rt2x00_intf *intf, + struct rt2x00intf_conf *conf, + const unsigned int flags) { - u32 tmp; - - tmp = le32_to_cpu(mac[1]); - rt2x00_set_field32(&tmp, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff); - mac[1] = cpu_to_le32(tmp); - - rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR2, mac, - (2 * sizeof(__le32))); -} + unsigned int beacon_base; + u32 reg; -static void rt61pci_config_bssid(struct rt2x00_dev *rt2x00dev, __le32 *bssid) -{ - u32 tmp; + if (flags & CONFIG_UPDATE_TYPE) { + /* + * Clear current synchronisation setup. + * For the Beacon base registers we only need to clear + * the first byte since that byte contains the VALID and OWNER + * bits which (when set to 0) will invalidate the entire beacon. + */ + beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, 0); + rt2x00pci_register_write(rt2x00dev, beacon_base, 0); - tmp = le32_to_cpu(bssid[1]); - rt2x00_set_field32(&tmp, MAC_CSR5_BSS_ID_MASK, 3); - bssid[1] = cpu_to_le32(tmp); + /* + * Enable synchronisation. + */ + rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); + rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1); + rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, + (conf->sync == TSF_SYNC_BEACON)); + rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); + rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, conf->sync); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); + } - rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR4, bssid, - (2 * sizeof(__le32))); -} + if (flags & CONFIG_UPDATE_MAC) { + reg = le32_to_cpu(conf->mac[1]); + rt2x00_set_field32(®, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff); + conf->mac[1] = cpu_to_le32(reg); -static void rt61pci_config_type(struct rt2x00_dev *rt2x00dev, const int type, - const int tsf_sync) -{ - u32 reg; + rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR2, + conf->mac, sizeof(conf->mac)); + } - /* - * Clear current synchronisation setup. - * For the Beacon base registers we only need to clear - * the first byte since that byte contains the VALID and OWNER - * bits which (when set to 0) will invalidate the entire beacon. - */ - rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, 0); - rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE0, 0); - rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE1, 0); - rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE2, 0); - rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE3, 0); + if (flags & CONFIG_UPDATE_BSSID) { + reg = le32_to_cpu(conf->bssid[1]); + rt2x00_set_field32(®, MAC_CSR5_BSS_ID_MASK, 3); + conf->bssid[1] = cpu_to_le32(reg); - /* - * Enable synchronisation. - */ - rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); - rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 1); - rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, - (tsf_sync == TSF_SYNC_BEACON)); - rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); - rt2x00_set_field32(®, TXRX_CSR9_TSF_SYNC, tsf_sync); - rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); + rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR4, + conf->bssid, sizeof(conf->bssid)); + } } -static void rt61pci_config_preamble(struct rt2x00_dev *rt2x00dev, - const int short_preamble, - const int ack_timeout, - const int ack_consume_time) +static int rt61pci_config_preamble(struct rt2x00_dev *rt2x00dev, + const int short_preamble, + const int ack_timeout, + const int ack_consume_time) { u32 reg; @@ -339,6 +336,8 @@ static void rt61pci_config_preamble(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(®, TXRX_CSR4_AUTORESPOND_PREAMBLE, !!short_preamble); rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg); + + return 0; } static void rt61pci_config_phymode(struct rt2x00_dev *rt2x00dev, @@ -667,8 +666,8 @@ static void rt61pci_config_duration(struct rt2x00_dev *rt2x00dev, } static void rt61pci_config(struct rt2x00_dev *rt2x00dev, - const unsigned int flags, - struct rt2x00lib_conf *libconf) + struct rt2x00lib_conf *libconf, + const unsigned int flags) { if (flags & CONFIG_UPDATE_PHYMODE) rt61pci_config_phymode(rt2x00dev, libconf->basic_rates); @@ -816,6 +815,13 @@ static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev) } /* + * If we are not associated, we should go straight to the + * dynamic CCA tuning. + */ + if (!rt2x00dev->intf_associated) + goto dynamic_cca_tune; + + /* * Special big-R17 for very short distance */ if (rssi >= -35) { @@ -866,6 +872,8 @@ static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev) return; } +dynamic_cca_tune: + /* * r17 does not yet exceed upper limit, continue and base * the r17 tuning on the false CCA count. @@ -1215,6 +1223,17 @@ static int rt61pci_init_registers(struct rt2x00_dev *rt2x00dev) rt2x00pci_register_write(rt2x00dev, AC_TXOP_CSR1, reg); /* + * Clear all beacons + * For the Beacon base registers we only need to clear + * the first byte since that byte contains the VALID and OWNER + * bits which (when set to 0) will invalidate the entire beacon. + */ + rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE0, 0); + rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE1, 0); + rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE2, 0); + rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE3, 0); + + /* * We must clear the error counters. * These registers are cleared on read, * so we may pass a useless variable to store the value. @@ -2378,25 +2397,20 @@ static int rt61pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, struct ieee80211_tx_control *control) { struct rt2x00_dev *rt2x00dev = hw->priv; + struct rt2x00_intf *intf = vif_to_intf(control->vif); struct skb_frame_desc *skbdesc; - struct data_queue *queue; - struct queue_entry *entry; + unsigned int beacon_base; - /* - * Just in case the ieee80211 doesn't set this, - * but we need this queue set for the descriptor - * initialization. - */ - control->queue = IEEE80211_TX_QUEUE_BEACON; - queue = rt2x00queue_get_queue(rt2x00dev, control->queue); - entry = rt2x00queue_get_entry(queue, Q_INDEX); + if (unlikely(!intf->beacon)) + return -ENOBUFS; /* * We need to append the descriptor in front of the * beacon frame. */ - if (skb_headroom(skb) < queue->desc_size) { - if (pskb_expand_head(skb, queue->desc_size, 0, GFP_ATOMIC)) { + if (skb_headroom(skb) < intf->beacon->queue->desc_size) { + if (pskb_expand_head(skb, intf->beacon->queue->desc_size, + 0, GFP_ATOMIC)) { dev_kfree_skb(skb); return -ENOMEM; } @@ -2405,29 +2419,36 @@ static int rt61pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, /* * Add the descriptor in front of the skb. */ - skb_push(skb, queue->desc_size); - memset(skb->data, 0, queue->desc_size); + skb_push(skb, intf->beacon->queue->desc_size); + memset(skb->data, 0, intf->beacon->queue->desc_size); /* * Fill in skb descriptor */ skbdesc = get_skb_frame_desc(skb); memset(skbdesc, 0, sizeof(*skbdesc)); - skbdesc->data = skb->data + queue->desc_size; - skbdesc->data_len = queue->data_size; + skbdesc->data = skb->data + intf->beacon->queue->desc_size; + skbdesc->data_len = skb->len - intf->beacon->queue->desc_size; skbdesc->desc = skb->data; - skbdesc->desc_len = queue->desc_size; - skbdesc->entry = entry; + skbdesc->desc_len = intf->beacon->queue->desc_size; + skbdesc->entry = intf->beacon; + /* + * Just in case the ieee80211 doesn't set this, + * but we need this queue set for the descriptor + * initialization. + */ + control->queue = IEEE80211_TX_QUEUE_BEACON; rt2x00lib_write_tx_desc(rt2x00dev, skb, control); /* * Write entire beacon with descriptor to register, * and kick the beacon generator. */ - rt2x00pci_register_multiwrite(rt2x00dev, HW_BEACON_BASE0, + beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); + rt2x00pci_register_multiwrite(rt2x00dev, beacon_base, skb->data, skb->len); - rt61pci_kick_tx_queue(rt2x00dev, IEEE80211_TX_QUEUE_BEACON); + rt61pci_kick_tx_queue(rt2x00dev, control->queue); return 0; } @@ -2469,9 +2490,7 @@ static const struct rt2x00lib_ops rt61pci_rt2x00_ops = { .write_tx_data = rt2x00pci_write_tx_data, .kick_tx_queue = rt61pci_kick_tx_queue, .fill_rxdone = rt61pci_fill_rxdone, - .config_mac_addr = rt61pci_config_mac_addr, - .config_bssid = rt61pci_config_bssid, - .config_type = rt61pci_config_type, + .config_intf = rt61pci_config_intf, .config_preamble = rt61pci_config_preamble, .config = rt61pci_config, }; @@ -2491,7 +2510,7 @@ static const struct data_queue_desc rt61pci_queue_tx = { }; static const struct data_queue_desc rt61pci_queue_bcn = { - .entry_num = BEACON_ENTRIES, + .entry_num = 4 * BEACON_ENTRIES, .data_size = MGMT_FRAME_SIZE, .desc_size = TXINFO_SIZE, .priv_size = sizeof(struct queue_entry_priv_pci_tx), @@ -2499,6 +2518,8 @@ static const struct data_queue_desc rt61pci_queue_bcn = { static const struct rt2x00_ops rt61pci_ops = { .name = KBUILD_MODNAME, + .max_sta_intf = 1, + .max_ap_intf = 4, .eeprom_size = EEPROM_SIZE, .rf_size = RF_SIZE, .rx = &rt61pci_queue_rx, |