diff options
Diffstat (limited to 'drivers/net/wireless/rtl818x.h')
| -rw-r--r-- | drivers/net/wireless/rtl818x.h | 226 |
1 files changed, 226 insertions, 0 deletions
diff --git a/drivers/net/wireless/rtl818x.h b/drivers/net/wireless/rtl818x.h new file mode 100644 index 00000000000..283de30628e --- /dev/null +++ b/drivers/net/wireless/rtl818x.h @@ -0,0 +1,226 @@ +/* + * Definitions for RTL818x hardware + * + * Copyright 2007 Michael Wu <flamingice@sourmilk.net> + * Copyright 2007 Andrea Merello <andreamrl@tiscali.it> + * + * Based on the r8187 driver, which is: + * Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef RTL818X_H +#define RTL818X_H + +struct rtl818x_csr { + u8 MAC[6]; + u8 reserved_0[2]; + __le32 MAR[2]; + u8 RX_FIFO_COUNT; + u8 reserved_1; + u8 TX_FIFO_COUNT; + u8 BQREQ; + u8 reserved_2[4]; + __le32 TSFT[2]; + __le32 TLPDA; + __le32 TNPDA; + __le32 THPDA; + __le16 BRSR; + u8 BSSID[6]; + u8 RESP_RATE; + u8 EIFS; + u8 reserved_3[1]; + u8 CMD; +#define RTL818X_CMD_TX_ENABLE (1 << 2) +#define RTL818X_CMD_RX_ENABLE (1 << 3) +#define RTL818X_CMD_RESET (1 << 4) + u8 reserved_4[4]; + __le16 INT_MASK; + __le16 INT_STATUS; +#define RTL818X_INT_RX_OK (1 << 0) +#define RTL818X_INT_RX_ERR (1 << 1) +#define RTL818X_INT_TXL_OK (1 << 2) +#define RTL818X_INT_TXL_ERR (1 << 3) +#define RTL818X_INT_RX_DU (1 << 4) +#define RTL818X_INT_RX_FO (1 << 5) +#define RTL818X_INT_TXN_OK (1 << 6) +#define RTL818X_INT_TXN_ERR (1 << 7) +#define RTL818X_INT_TXH_OK (1 << 8) +#define RTL818X_INT_TXH_ERR (1 << 9) +#define RTL818X_INT_TXB_OK (1 << 10) +#define RTL818X_INT_TXB_ERR (1 << 11) +#define RTL818X_INT_ATIM (1 << 12) +#define RTL818X_INT_BEACON (1 << 13) +#define RTL818X_INT_TIME_OUT (1 << 14) +#define RTL818X_INT_TX_FO (1 << 15) + __le32 TX_CONF; +#define RTL818X_TX_CONF_LOOPBACK_MAC (1 << 17) +#define RTL818X_TX_CONF_NO_ICV (1 << 19) +#define RTL818X_TX_CONF_DISCW (1 << 20) +#define RTL818X_TX_CONF_R8180_ABCD (2 << 25) +#define RTL818X_TX_CONF_R8180_F (3 << 25) +#define RTL818X_TX_CONF_R8185_ABC (4 << 25) +#define RTL818X_TX_CONF_R8185_D (5 << 25) +#define RTL818X_TX_CONF_HWVER_MASK (7 << 25) +#define RTL818X_TX_CONF_CW_MIN (1 << 31) + __le32 RX_CONF; +#define RTL818X_RX_CONF_MONITOR (1 << 0) +#define RTL818X_RX_CONF_NICMAC (1 << 1) +#define RTL818X_RX_CONF_MULTICAST (1 << 2) +#define RTL818X_RX_CONF_BROADCAST (1 << 3) +#define RTL818X_RX_CONF_DATA (1 << 18) +#define RTL818X_RX_CONF_CTRL (1 << 19) +#define RTL818X_RX_CONF_MGMT (1 << 20) +#define RTL818X_RX_CONF_BSSID (1 << 23) +#define RTL818X_RX_CONF_RX_AUTORESETPHY (1 << 28) +#define RTL818X_RX_CONF_ONLYERLPKT (1 << 31) + __le32 INT_TIMEOUT; + __le32 TBDA; + u8 EEPROM_CMD; +#define RTL818X_EEPROM_CMD_READ (1 << 0) +#define RTL818X_EEPROM_CMD_WRITE (1 << 1) +#define RTL818X_EEPROM_CMD_CK (1 << 2) +#define RTL818X_EEPROM_CMD_CS (1 << 3) +#define RTL818X_EEPROM_CMD_NORMAL (0 << 6) +#define RTL818X_EEPROM_CMD_LOAD (1 << 6) +#define RTL818X_EEPROM_CMD_PROGRAM (2 << 6) +#define RTL818X_EEPROM_CMD_CONFIG (3 << 6) + u8 CONFIG0; + u8 CONFIG1; + u8 CONFIG2; + __le32 ANAPARAM; + u8 MSR; +#define RTL818X_MSR_NO_LINK (0 << 2) +#define RTL818X_MSR_ADHOC (1 << 2) +#define RTL818X_MSR_INFRA (2 << 2) + u8 CONFIG3; +#define RTL818X_CONFIG3_ANAPARAM_WRITE (1 << 6) + u8 CONFIG4; +#define RTL818X_CONFIG4_POWEROFF (1 << 6) +#define RTL818X_CONFIG4_VCOOFF (1 << 7) + u8 TESTR; + u8 reserved_9[2]; + __le16 PGSELECT; + __le32 ANAPARAM2; + u8 reserved_10[12]; + __le16 BEACON_INTERVAL; + __le16 ATIM_WND; + __le16 BEACON_INTERVAL_TIME; + __le16 ATIMTR_INTERVAL; + u8 reserved_11[4]; + u8 PHY[4]; + __le16 RFPinsOutput; + __le16 RFPinsEnable; + __le16 RFPinsSelect; + __le16 RFPinsInput; + __le32 RF_PARA; + __le32 RF_TIMING; + u8 GP_ENABLE; + u8 GPIO; + u8 reserved_12[10]; + u8 TX_AGC_CTL; +#define RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT (1 << 0) +#define RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT (1 << 1) +#define RTL818X_TX_AGC_CTL_FEEDBACK_ANT (1 << 2) + u8 TX_GAIN_CCK; + u8 TX_GAIN_OFDM; + u8 TX_ANTENNA; + u8 reserved_13[16]; + u8 WPA_CONF; + u8 reserved_14[3]; + u8 SIFS; + u8 DIFS; + u8 SLOT; + u8 reserved_15[5]; + u8 CW_CONF; +#define RTL818X_CW_CONF_PERPACKET_CW_SHIFT (1 << 0) +#define RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT (1 << 1) + u8 CW_VAL; + u8 RATE_FALLBACK; + u8 reserved_16[25]; + u8 CONFIG5; + u8 TX_DMA_POLLING; + u8 reserved_17[2]; + __le16 CWR; + u8 RETRY_CTR; + u8 reserved_18[5]; + __le32 RDSAR; + u8 reserved_19[18]; + u16 TALLY_CNT; + u8 TALLY_SEL; +} __attribute__((packed)); + +static const struct ieee80211_rate rtl818x_rates[] = { + { .rate = 10, + .val = 0, + .flags = IEEE80211_RATE_CCK }, + { .rate = 20, + .val = 1, + .flags = IEEE80211_RATE_CCK }, + { .rate = 55, + .val = 2, + .flags = IEEE80211_RATE_CCK }, + { .rate = 110, + .val = 3, + .flags = IEEE80211_RATE_CCK }, + { .rate = 60, + .val = 4, + .flags = IEEE80211_RATE_OFDM }, + { .rate = 90, + .val = 5, + .flags = IEEE80211_RATE_OFDM }, + { .rate = 120, + .val = 6, + .flags = IEEE80211_RATE_OFDM }, + { .rate = 180, + .val = 7, + .flags = IEEE80211_RATE_OFDM }, + { .rate = 240, + .val = 8, + .flags = IEEE80211_RATE_OFDM }, + { .rate = 360, + .val = 9, + .flags = IEEE80211_RATE_OFDM }, + { .rate = 480, + .val = 10, + .flags = IEEE80211_RATE_OFDM }, + { .rate = 540, + .val = 11, + .flags = IEEE80211_RATE_OFDM }, +}; + +static const struct ieee80211_channel rtl818x_channels[] = { + { .chan = 1, + .freq = 2412}, + { .chan = 2, + .freq = 2417}, + { .chan = 3, + .freq = 2422}, + { .chan = 4, + .freq = 2427}, + { .chan = 5, + .freq = 2432}, + { .chan = 6, + .freq = 2437}, + { .chan = 7, + .freq = 2442}, + { .chan = 8, + .freq = 2447}, + { .chan = 9, + .freq = 2452}, + { .chan = 10, + .freq = 2457}, + { .chan = 11, + .freq = 2462}, + { .chan = 12, + .freq = 2467}, + { .chan = 13, + .freq = 2472}, + { .chan = 14, + .freq = 2484} +}; + +#endif /* RTL818X_H */ |