diff options
Diffstat (limited to 'drivers/net/wireless/wavelan_cs.h')
-rw-r--r-- | drivers/net/wireless/wavelan_cs.h | 386 |
1 files changed, 0 insertions, 386 deletions
diff --git a/drivers/net/wireless/wavelan_cs.h b/drivers/net/wireless/wavelan_cs.h deleted file mode 100644 index 2e4bfe4147c..00000000000 --- a/drivers/net/wireless/wavelan_cs.h +++ /dev/null @@ -1,386 +0,0 @@ -/* - * Wavelan Pcmcia driver - * - * Jean II - HPLB '96 - * - * Reorganization and extension of the driver. - * Original copyright follow. See wavelan_cs.h for details. - * - * This file contain the declarations of the Wavelan hardware. Note that - * the Pcmcia Wavelan include a i82593 controller (see definitions in - * file i82593.h). - * - * The main difference between the pcmcia hardware and the ISA one is - * the Ethernet Controller (i82593 instead of i82586). The i82593 allow - * only one send buffer. The PSA (Parameter Storage Area : EEprom for - * permanent storage of various info) is memory mapped, but not the - * MMI (Modem Management Interface). - */ - -/* - * Definitions for the AT&T GIS (formerly NCR) WaveLAN PCMCIA card: - * An Ethernet-like radio transceiver controlled by an Intel 82593 - * coprocessor. - * - * - **************************************************************************** - * Copyright 1995 - * Anthony D. Joseph - * Massachusetts Institute of Technology - * - * Permission to use, copy, modify, and distribute this program - * for any purpose and without fee is hereby granted, provided - * that this copyright and permission notice appear on all copies - * and supporting documentation, the name of M.I.T. not be used - * in advertising or publicity pertaining to distribution of the - * program without specific prior permission, and notice be given - * in supporting documentation that copying and distribution is - * by permission of M.I.T. M.I.T. makes no representations about - * the suitability of this software for any purpose. It is pro- - * vided "as is" without express or implied warranty. - **************************************************************************** - * - * - * Credits: - * Special thanks to Jan Hoogendoorn of AT&T GIS Utrecht for - * providing extremely useful information about WaveLAN PCMCIA hardware - * - * This driver is based upon several other drivers, in particular: - * David Hinds' Linux driver for the PCMCIA 3c589 ethernet adapter - * Bruce Janson's Linux driver for the AT-bus WaveLAN adapter - * Anders Klemets' PCMCIA WaveLAN adapter driver - * Robert Morris' BSDI driver for the PCMCIA WaveLAN adapter - */ - -#ifndef _WAVELAN_CS_H -#define _WAVELAN_CS_H - -/************************** MAGIC NUMBERS ***************************/ - -/* The detection of the wavelan card is made by reading the MAC address - * from the card and checking it. If you have a non AT&T product (OEM, - * like DEC RoamAbout, or Digital Ocean, Epson, ...), you must modify this - * part to accommodate your hardware... - */ -static const unsigned char MAC_ADDRESSES[][3] = -{ - { 0x08, 0x00, 0x0E }, /* AT&T Wavelan (standard) & DEC RoamAbout */ - { 0x08, 0x00, 0x6A }, /* AT&T Wavelan (alternate) */ - { 0x00, 0x00, 0xE1 }, /* Hitachi Wavelan */ - { 0x00, 0x60, 0x1D } /* Lucent Wavelan (another one) */ - /* Add your card here and send me the patch ! */ -}; - -/* - * Constants used to convert channels to frequencies - */ - -/* Frequency available in the 2.0 modem, in units of 250 kHz - * (as read in the offset register of the dac area). - * Used to map channel numbers used by `wfreqsel' to frequencies - */ -static const short channel_bands[] = { 0x30, 0x58, 0x64, 0x7A, 0x80, 0xA8, - 0xD0, 0xF0, 0xF8, 0x150 }; - -/* Frequencies of the 1.0 modem (fixed frequencies). - * Use to map the PSA `subband' to a frequency - * Note : all frequencies apart from the first one need to be multiplied by 10 - */ -static const int fixed_bands[] = { 915e6, 2.425e8, 2.46e8, 2.484e8, 2.4305e8 }; - - -/*************************** PC INTERFACE ****************************/ - -/* WaveLAN host interface definitions */ - -#define LCCR(base) (base) /* LAN Controller Command Register */ -#define LCSR(base) (base) /* LAN Controller Status Register */ -#define HACR(base) (base+0x1) /* Host Adapter Command Register */ -#define HASR(base) (base+0x1) /* Host Adapter Status Register */ -#define PIORL(base) (base+0x2) /* Program I/O Register Low */ -#define RPLL(base) (base+0x2) /* Receive Pointer Latched Low */ -#define PIORH(base) (base+0x3) /* Program I/O Register High */ -#define RPLH(base) (base+0x3) /* Receive Pointer Latched High */ -#define PIOP(base) (base+0x4) /* Program I/O Port */ -#define MMR(base) (base+0x6) /* MMI Address Register */ -#define MMD(base) (base+0x7) /* MMI Data Register */ - -/* Host Adaptor Command Register bit definitions */ - -#define HACR_LOF (1 << 3) /* Lock Out Flag, toggle every 250ms */ -#define HACR_PWR_STAT (1 << 4) /* Power State, 1=active, 0=sleep */ -#define HACR_TX_DMA_RESET (1 << 5) /* Reset transmit DMA ptr on high */ -#define HACR_RX_DMA_RESET (1 << 6) /* Reset receive DMA ptr on high */ -#define HACR_ROM_WEN (1 << 7) /* EEPROM write enabled when true */ - -#define HACR_RESET (HACR_TX_DMA_RESET | HACR_RX_DMA_RESET) -#define HACR_DEFAULT (HACR_PWR_STAT) - -/* Host Adapter Status Register bit definitions */ - -#define HASR_MMI_BUSY (1 << 2) /* MMI is busy when true */ -#define HASR_LOF (1 << 3) /* Lock out flag status */ -#define HASR_NO_CLK (1 << 4) /* active when modem not connected */ - -/* Miscellaneous bit definitions */ - -#define PIORH_SEL_TX (1 << 5) /* PIOR points to 0=rx/1=tx buffer */ -#define MMR_MMI_WR (1 << 0) /* Next MMI cycle is 0=read, 1=write */ -#define PIORH_MASK 0x1f /* only low 5 bits are significant */ -#define RPLH_MASK 0x1f /* only low 5 bits are significant */ -#define MMI_ADDR_MASK 0x7e /* Bits 1-6 of MMR are significant */ - -/* Attribute Memory map */ - -#define CIS_ADDR 0x0000 /* Card Information Status Register */ -#define PSA_ADDR 0x0e00 /* Parameter Storage Area address */ -#define EEPROM_ADDR 0x1000 /* EEPROM address (unused ?) */ -#define COR_ADDR 0x4000 /* Configuration Option Register */ - -/* Configuration Option Register bit definitions */ - -#define COR_CONFIG (1 << 0) /* Config Index, 0 when unconfigured */ -#define COR_SW_RESET (1 << 7) /* Software Reset on true */ -#define COR_LEVEL_IRQ (1 << 6) /* Level IRQ */ - -/* Local Memory map */ - -#define RX_BASE 0x0000 /* Receive memory, 8 kB */ -#define TX_BASE 0x2000 /* Transmit memory, 2 kB */ -#define UNUSED_BASE 0x2800 /* Unused, 22 kB */ -#define RX_SIZE (TX_BASE-RX_BASE) /* Size of receive area */ -#define RX_SIZE_SHIFT 6 /* Bits to shift in stop register */ - -#define TRUE 1 -#define FALSE 0 - -#define MOD_ENAL 1 -#define MOD_PROM 2 - -/* Size of a MAC address */ -#define WAVELAN_ADDR_SIZE 6 - -/* Maximum size of Wavelan packet */ -#define WAVELAN_MTU 1500 - -#define MAXDATAZ (6 + 6 + 2 + WAVELAN_MTU) - -/********************** PARAMETER STORAGE AREA **********************/ - -/* - * Parameter Storage Area (PSA). - */ -typedef struct psa_t psa_t; -struct psa_t -{ - /* For the PCMCIA Adapter, locations 0x00-0x0F are unused and fixed at 00 */ - unsigned char psa_io_base_addr_1; /* [0x00] Base address 1 ??? */ - unsigned char psa_io_base_addr_2; /* [0x01] Base address 2 */ - unsigned char psa_io_base_addr_3; /* [0x02] Base address 3 */ - unsigned char psa_io_base_addr_4; /* [0x03] Base address 4 */ - unsigned char psa_rem_boot_addr_1; /* [0x04] Remote Boot Address 1 */ - unsigned char psa_rem_boot_addr_2; /* [0x05] Remote Boot Address 2 */ - unsigned char psa_rem_boot_addr_3; /* [0x06] Remote Boot Address 3 */ - unsigned char psa_holi_params; /* [0x07] HOst Lan Interface (HOLI) Parameters */ - unsigned char psa_int_req_no; /* [0x08] Interrupt Request Line */ - unsigned char psa_unused0[7]; /* [0x09-0x0F] unused */ - - unsigned char psa_univ_mac_addr[WAVELAN_ADDR_SIZE]; /* [0x10-0x15] Universal (factory) MAC Address */ - unsigned char psa_local_mac_addr[WAVELAN_ADDR_SIZE]; /* [0x16-1B] Local MAC Address */ - unsigned char psa_univ_local_sel; /* [0x1C] Universal Local Selection */ -#define PSA_UNIVERSAL 0 /* Universal (factory) */ -#define PSA_LOCAL 1 /* Local */ - unsigned char psa_comp_number; /* [0x1D] Compatability Number: */ -#define PSA_COMP_PC_AT_915 0 /* PC-AT 915 MHz */ -#define PSA_COMP_PC_MC_915 1 /* PC-MC 915 MHz */ -#define PSA_COMP_PC_AT_2400 2 /* PC-AT 2.4 GHz */ -#define PSA_COMP_PC_MC_2400 3 /* PC-MC 2.4 GHz */ -#define PSA_COMP_PCMCIA_915 4 /* PCMCIA 915 MHz or 2.0 */ - unsigned char psa_thr_pre_set; /* [0x1E] Modem Threshold Preset */ - unsigned char psa_feature_select; /* [0x1F] Call code required (1=on) */ -#define PSA_FEATURE_CALL_CODE 0x01 /* Call code required (Japan) */ - unsigned char psa_subband; /* [0x20] Subband */ -#define PSA_SUBBAND_915 0 /* 915 MHz or 2.0 */ -#define PSA_SUBBAND_2425 1 /* 2425 MHz */ -#define PSA_SUBBAND_2460 2 /* 2460 MHz */ -#define PSA_SUBBAND_2484 3 /* 2484 MHz */ -#define PSA_SUBBAND_2430_5 4 /* 2430.5 MHz */ - unsigned char psa_quality_thr; /* [0x21] Modem Quality Threshold */ - unsigned char psa_mod_delay; /* [0x22] Modem Delay ??? (reserved) */ - unsigned char psa_nwid[2]; /* [0x23-0x24] Network ID */ - unsigned char psa_nwid_select; /* [0x25] Network ID Select On Off */ - unsigned char psa_encryption_select; /* [0x26] Encryption On Off */ - unsigned char psa_encryption_key[8]; /* [0x27-0x2E] Encryption Key */ - unsigned char psa_databus_width; /* [0x2F] AT bus width select 8/16 */ - unsigned char psa_call_code[8]; /* [0x30-0x37] (Japan) Call Code */ - unsigned char psa_nwid_prefix[2]; /* [0x38-0x39] Roaming domain */ - unsigned char psa_reserved[2]; /* [0x3A-0x3B] Reserved - fixed 00 */ - unsigned char psa_conf_status; /* [0x3C] Conf Status, bit 0=1:config*/ - unsigned char psa_crc[2]; /* [0x3D] CRC-16 over PSA */ - unsigned char psa_crc_status; /* [0x3F] CRC Valid Flag */ -}; - -/* Size for structure checking (if padding is correct) */ -#define PSA_SIZE 64 - -/* Calculate offset of a field in the above structure - * Warning : only even addresses are used */ -#define psaoff(p,f) ((unsigned short) ((void *)(&((psa_t *) ((void *) NULL + (p)))->f) - (void *) NULL)) - -/******************** MODEM MANAGEMENT INTERFACE ********************/ - -/* - * Modem Management Controller (MMC) write structure. - */ -typedef struct mmw_t mmw_t; -struct mmw_t -{ - unsigned char mmw_encr_key[8]; /* encryption key */ - unsigned char mmw_encr_enable; /* enable/disable encryption */ -#define MMW_ENCR_ENABLE_MODE 0x02 /* Mode of security option */ -#define MMW_ENCR_ENABLE_EN 0x01 /* Enable security option */ - unsigned char mmw_unused0[1]; /* unused */ - unsigned char mmw_des_io_invert; /* Encryption option */ -#define MMW_DES_IO_INVERT_RES 0x0F /* Reserved */ -#define MMW_DES_IO_INVERT_CTRL 0xF0 /* Control ??? (set to 0) */ - unsigned char mmw_unused1[5]; /* unused */ - unsigned char mmw_loopt_sel; /* looptest selection */ -#define MMW_LOOPT_SEL_DIS_NWID 0x40 /* disable NWID filtering */ -#define MMW_LOOPT_SEL_INT 0x20 /* activate Attention Request */ -#define MMW_LOOPT_SEL_LS 0x10 /* looptest w/o collision avoidance */ -#define MMW_LOOPT_SEL_LT3A 0x08 /* looptest 3a */ -#define MMW_LOOPT_SEL_LT3B 0x04 /* looptest 3b */ -#define MMW_LOOPT_SEL_LT3C 0x02 /* looptest 3c */ -#define MMW_LOOPT_SEL_LT3D 0x01 /* looptest 3d */ - unsigned char mmw_jabber_enable; /* jabber timer enable */ - /* Abort transmissions > 200 ms */ - unsigned char mmw_freeze; /* freeze / unfreeeze signal level */ - /* 0 : signal level & qual updated for every new message, 1 : frozen */ - unsigned char mmw_anten_sel; /* antenna selection */ -#define MMW_ANTEN_SEL_SEL 0x01 /* direct antenna selection */ -#define MMW_ANTEN_SEL_ALG_EN 0x02 /* antenna selection algo. enable */ - unsigned char mmw_ifs; /* inter frame spacing */ - /* min time between transmission in bit periods (.5 us) - bit 0 ignored */ - unsigned char mmw_mod_delay; /* modem delay (synchro) */ - unsigned char mmw_jam_time; /* jamming time (after collision) */ - unsigned char mmw_unused2[1]; /* unused */ - unsigned char mmw_thr_pre_set; /* level threshold preset */ - /* Discard all packet with signal < this value (4) */ - unsigned char mmw_decay_prm; /* decay parameters */ - unsigned char mmw_decay_updat_prm; /* decay update parameterz */ - unsigned char mmw_quality_thr; /* quality (z-quotient) threshold */ - /* Discard all packet with quality < this value (3) */ - unsigned char mmw_netw_id_l; /* NWID low order byte */ - unsigned char mmw_netw_id_h; /* NWID high order byte */ - /* Network ID or Domain : create virtual net on the air */ - - /* 2.0 Hardware extension - frequency selection support */ - unsigned char mmw_mode_select; /* for analog tests (set to 0) */ - unsigned char mmw_unused3[1]; /* unused */ - unsigned char mmw_fee_ctrl; /* frequency eeprom control */ -#define MMW_FEE_CTRL_PRE 0x10 /* Enable protected instructions */ -#define MMW_FEE_CTRL_DWLD 0x08 /* Download eeprom to mmc */ -#define MMW_FEE_CTRL_CMD 0x07 /* EEprom commands : */ -#define MMW_FEE_CTRL_READ 0x06 /* Read */ -#define MMW_FEE_CTRL_WREN 0x04 /* Write enable */ -#define MMW_FEE_CTRL_WRITE 0x05 /* Write data to address */ -#define MMW_FEE_CTRL_WRALL 0x04 /* Write data to all addresses */ -#define MMW_FEE_CTRL_WDS 0x04 /* Write disable */ -#define MMW_FEE_CTRL_PRREAD 0x16 /* Read addr from protect register */ -#define MMW_FEE_CTRL_PREN 0x14 /* Protect register enable */ -#define MMW_FEE_CTRL_PRCLEAR 0x17 /* Unprotect all registers */ -#define MMW_FEE_CTRL_PRWRITE 0x15 /* Write addr in protect register */ -#define MMW_FEE_CTRL_PRDS 0x14 /* Protect register disable */ - /* Never issue this command (PRDS) : it's irreversible !!! */ - - unsigned char mmw_fee_addr; /* EEprom address */ -#define MMW_FEE_ADDR_CHANNEL 0xF0 /* Select the channel */ -#define MMW_FEE_ADDR_OFFSET 0x0F /* Offset in channel data */ -#define MMW_FEE_ADDR_EN 0xC0 /* FEE_CTRL enable operations */ -#define MMW_FEE_ADDR_DS 0x00 /* FEE_CTRL disable operations */ -#define MMW_FEE_ADDR_ALL 0x40 /* FEE_CTRL all operations */ -#define MMW_FEE_ADDR_CLEAR 0xFF /* FEE_CTRL clear operations */ - - unsigned char mmw_fee_data_l; /* Write data to EEprom */ - unsigned char mmw_fee_data_h; /* high octet */ - unsigned char mmw_ext_ant; /* Setting for external antenna */ -#define MMW_EXT_ANT_EXTANT 0x01 /* Select external antenna */ -#define MMW_EXT_ANT_POL 0x02 /* Polarity of the antenna */ -#define MMW_EXT_ANT_INTERNAL 0x00 /* Internal antenna */ -#define MMW_EXT_ANT_EXTERNAL 0x03 /* External antenna */ -#define MMW_EXT_ANT_IQ_TEST 0x1C /* IQ test pattern (set to 0) */ -} __attribute__((packed)); - -/* Size for structure checking (if padding is correct) */ -#define MMW_SIZE 37 - -/* Calculate offset of a field in the above structure */ -#define mmwoff(p,f) (unsigned short)((void *)(&((mmw_t *)((void *)0 + (p)))->f) - (void *)0) - - -/* - * Modem Management Controller (MMC) read structure. - */ -typedef struct mmr_t mmr_t; -struct mmr_t -{ - unsigned char mmr_unused0[8]; /* unused */ - unsigned char mmr_des_status; /* encryption status */ - unsigned char mmr_des_avail; /* encryption available (0x55 read) */ -#define MMR_DES_AVAIL_DES 0x55 /* DES available */ -#define MMR_DES_AVAIL_AES 0x33 /* AES (AT&T) available */ - unsigned char mmr_des_io_invert; /* des I/O invert register */ - unsigned char mmr_unused1[5]; /* unused */ - unsigned char mmr_dce_status; /* DCE status */ -#define MMR_DCE_STATUS_RX_BUSY 0x01 /* receiver busy */ -#define MMR_DCE_STATUS_LOOPT_IND 0x02 /* loop test indicated */ -#define MMR_DCE_STATUS_TX_BUSY 0x04 /* transmitter on */ -#define MMR_DCE_STATUS_JBR_EXPIRED 0x08 /* jabber timer expired */ -#define MMR_DCE_STATUS 0x0F /* mask to get the bits */ - unsigned char mmr_dsp_id; /* DSP id (AA = Daedalus rev A) */ - unsigned char mmr_unused2[2]; /* unused */ - unsigned char mmr_correct_nwid_l; /* # of correct NWID's rxd (low) */ - unsigned char mmr_correct_nwid_h; /* # of correct NWID's rxd (high) */ - /* Warning : Read high order octet first !!! */ - unsigned char mmr_wrong_nwid_l; /* # of wrong NWID's rxd (low) */ - unsigned char mmr_wrong_nwid_h; /* # of wrong NWID's rxd (high) */ - unsigned char mmr_thr_pre_set; /* level threshold preset */ -#define MMR_THR_PRE_SET 0x3F /* level threshold preset */ -#define MMR_THR_PRE_SET_CUR 0x80 /* Current signal above it */ - unsigned char mmr_signal_lvl; /* signal level */ -#define MMR_SIGNAL_LVL 0x3F /* signal level */ -#define MMR_SIGNAL_LVL_VALID 0x80 /* Updated since last read */ - unsigned char mmr_silence_lvl; /* silence level (noise) */ -#define MMR_SILENCE_LVL 0x3F /* silence level */ -#define MMR_SILENCE_LVL_VALID 0x80 /* Updated since last read */ - unsigned char mmr_sgnl_qual; /* signal quality */ -#define MMR_SGNL_QUAL 0x0F /* signal quality */ -#define MMR_SGNL_QUAL_ANT 0x80 /* current antenna used */ - unsigned char mmr_netw_id_l; /* NWID low order byte ??? */ - unsigned char mmr_unused3[3]; /* unused */ - - /* 2.0 Hardware extension - frequency selection support */ - unsigned char mmr_fee_status; /* Status of frequency eeprom */ -#define MMR_FEE_STATUS_ID 0xF0 /* Modem revision id */ -#define MMR_FEE_STATUS_DWLD 0x08 /* Download in progress */ -#define MMR_FEE_STATUS_BUSY 0x04 /* EEprom busy */ - unsigned char mmr_unused4[1]; /* unused */ - unsigned char mmr_fee_data_l; /* Read data from eeprom (low) */ - unsigned char mmr_fee_data_h; /* Read data from eeprom (high) */ -}; - -/* Size for structure checking (if padding is correct) */ -#define MMR_SIZE 36 - -/* Calculate offset of a field in the above structure */ -#define mmroff(p,f) (unsigned short)((void *)(&((mmr_t *)((void *)0 + (p)))->f) - (void *)0) - - -/* Make the two above structures one */ -typedef union mm_t -{ - struct mmw_t w; /* Write to the mmc */ - struct mmr_t r; /* Read from the mmc */ -} mm_t; - -#endif /* _WAVELAN_CS_H */ |