diff options
Diffstat (limited to 'drivers/net/wireless')
22 files changed, 175 insertions, 199 deletions
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index 932d6b1c9d0..45f47c1c0a3 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -3657,7 +3657,7 @@ void mpi_receive_802_11 (struct airo_info *ai) ptr += hdrlen; if (hdrlen == 24) ptr += 6; - gap = le16_to_cpu(get_unaligned((__le16 *)ptr)); + gap = get_unaligned_le16(ptr); ptr += sizeof(__le16); if (gap) { if (gap <= 8) @@ -4347,24 +4347,28 @@ static int proc_config_open( struct inode *inode, struct file *file ); static int proc_wepkey_open( struct inode *inode, struct file *file ); static const struct file_operations proc_statsdelta_ops = { + .owner = THIS_MODULE, .read = proc_read, .open = proc_statsdelta_open, .release = proc_close }; static const struct file_operations proc_stats_ops = { + .owner = THIS_MODULE, .read = proc_read, .open = proc_stats_open, .release = proc_close }; static const struct file_operations proc_status_ops = { + .owner = THIS_MODULE, .read = proc_read, .open = proc_status_open, .release = proc_close }; static const struct file_operations proc_SSID_ops = { + .owner = THIS_MODULE, .read = proc_read, .write = proc_write, .open = proc_SSID_open, @@ -4372,6 +4376,7 @@ static const struct file_operations proc_SSID_ops = { }; static const struct file_operations proc_BSSList_ops = { + .owner = THIS_MODULE, .read = proc_read, .write = proc_write, .open = proc_BSSList_open, @@ -4379,6 +4384,7 @@ static const struct file_operations proc_BSSList_ops = { }; static const struct file_operations proc_APList_ops = { + .owner = THIS_MODULE, .read = proc_read, .write = proc_write, .open = proc_APList_open, @@ -4386,6 +4392,7 @@ static const struct file_operations proc_APList_ops = { }; static const struct file_operations proc_config_ops = { + .owner = THIS_MODULE, .read = proc_read, .write = proc_write, .open = proc_config_open, @@ -4393,6 +4400,7 @@ static const struct file_operations proc_config_ops = { }; static const struct file_operations proc_wepkey_ops = { + .owner = THIS_MODULE, .read = proc_read, .write = proc_write, .open = proc_wepkey_open, @@ -4411,10 +4419,6 @@ struct proc_data { void (*on_close) (struct inode *, struct file *); }; -#ifndef SETPROC_OPS -#define SETPROC_OPS(entry, ops) (entry)->proc_fops = &(ops) -#endif - static int setup_proc_entry( struct net_device *dev, struct airo_info *apriv ) { struct proc_dir_entry *entry; @@ -4430,100 +4434,76 @@ static int setup_proc_entry( struct net_device *dev, apriv->proc_entry->owner = THIS_MODULE; /* Setup the StatsDelta */ - entry = create_proc_entry("StatsDelta", - S_IFREG | (S_IRUGO&proc_perm), - apriv->proc_entry); + entry = proc_create_data("StatsDelta", + S_IFREG | (S_IRUGO&proc_perm), + apriv->proc_entry, &proc_statsdelta_ops, dev); if (!entry) goto fail_stats_delta; entry->uid = proc_uid; entry->gid = proc_gid; - entry->data = dev; - entry->owner = THIS_MODULE; - SETPROC_OPS(entry, proc_statsdelta_ops); /* Setup the Stats */ - entry = create_proc_entry("Stats", - S_IFREG | (S_IRUGO&proc_perm), - apriv->proc_entry); + entry = proc_create_data("Stats", + S_IFREG | (S_IRUGO&proc_perm), + apriv->proc_entry, &proc_stats_ops, dev); if (!entry) goto fail_stats; entry->uid = proc_uid; entry->gid = proc_gid; - entry->data = dev; - entry->owner = THIS_MODULE; - SETPROC_OPS(entry, proc_stats_ops); /* Setup the Status */ - entry = create_proc_entry("Status", - S_IFREG | (S_IRUGO&proc_perm), - apriv->proc_entry); + entry = proc_create_data("Status", + S_IFREG | (S_IRUGO&proc_perm), + apriv->proc_entry, &proc_status_ops, dev); if (!entry) goto fail_status; entry->uid = proc_uid; entry->gid = proc_gid; - entry->data = dev; - entry->owner = THIS_MODULE; - SETPROC_OPS(entry, proc_status_ops); /* Setup the Config */ - entry = create_proc_entry("Config", - S_IFREG | proc_perm, - apriv->proc_entry); + entry = proc_create_data("Config", + S_IFREG | proc_perm, + apriv->proc_entry, &proc_config_ops, dev); if (!entry) goto fail_config; entry->uid = proc_uid; entry->gid = proc_gid; - entry->data = dev; - entry->owner = THIS_MODULE; - SETPROC_OPS(entry, proc_config_ops); /* Setup the SSID */ - entry = create_proc_entry("SSID", - S_IFREG | proc_perm, - apriv->proc_entry); + entry = proc_create_data("SSID", + S_IFREG | proc_perm, + apriv->proc_entry, &proc_SSID_ops, dev); if (!entry) goto fail_ssid; entry->uid = proc_uid; entry->gid = proc_gid; - entry->data = dev; - entry->owner = THIS_MODULE; - SETPROC_OPS(entry, proc_SSID_ops); /* Setup the APList */ - entry = create_proc_entry("APList", - S_IFREG | proc_perm, - apriv->proc_entry); + entry = proc_create_data("APList", + S_IFREG | proc_perm, + apriv->proc_entry, &proc_APList_ops, dev); if (!entry) goto fail_aplist; entry->uid = proc_uid; entry->gid = proc_gid; - entry->data = dev; - entry->owner = THIS_MODULE; - SETPROC_OPS(entry, proc_APList_ops); /* Setup the BSSList */ - entry = create_proc_entry("BSSList", - S_IFREG | proc_perm, - apriv->proc_entry); + entry = proc_create_data("BSSList", + S_IFREG | proc_perm, + apriv->proc_entry, &proc_BSSList_ops, dev); if (!entry) goto fail_bsslist; entry->uid = proc_uid; entry->gid = proc_gid; - entry->data = dev; - entry->owner = THIS_MODULE; - SETPROC_OPS(entry, proc_BSSList_ops); /* Setup the WepKey */ - entry = create_proc_entry("WepKey", - S_IFREG | proc_perm, - apriv->proc_entry); + entry = proc_create_data("WepKey", + S_IFREG | proc_perm, + apriv->proc_entry, &proc_wepkey_ops, dev); if (!entry) goto fail_wepkey; entry->uid = proc_uid; entry->gid = proc_gid; - entry->data = dev; - entry->owner = THIS_MODULE; - SETPROC_OPS(entry, proc_wepkey_ops); return 0; @@ -5625,9 +5605,9 @@ static int __init airo_init_module( void ) int have_isa_dev = 0; #endif - airo_entry = create_proc_entry("aironet", + airo_entry = create_proc_entry("driver/aironet", S_IFDIR | airo_perm, - proc_root_driver); + NULL); if (airo_entry) { airo_entry->uid = proc_uid; @@ -5651,7 +5631,7 @@ static int __init airo_init_module( void ) airo_print_info("", "Finished probing for PCI adapters"); if (i) { - remove_proc_entry("aironet", proc_root_driver); + remove_proc_entry("driver/aironet", NULL); return i; } #endif @@ -5673,7 +5653,7 @@ static void __exit airo_cleanup_module( void ) #ifdef CONFIG_PCI pci_unregister_driver(&airo_driver); #endif - remove_proc_entry("aironet", proc_root_driver); + remove_proc_entry("driver/aironet", NULL); } /* diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index e18305b781c..4e5c8fc3520 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -58,10 +58,6 @@ #include "reg.h" #include "debug.h" -/* unaligned little endian access */ -#define LE_READ_2(_p) (le16_to_cpu(get_unaligned((__le16 *)(_p)))) -#define LE_READ_4(_p) (le32_to_cpu(get_unaligned((__le32 *)(_p)))) - enum { ATH_LED_TX, ATH_LED_RX, @@ -2909,9 +2905,9 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw, if (!mclist) break; /* calculate XOR of eight 6-bit values */ - val = LE_READ_4(mclist->dmi_addr + 0); + val = get_unaligned_le32(mclist->dmi_addr + 0); pos = (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val; - val = LE_READ_4(mclist->dmi_addr + 3); + val = get_unaligned_le32(mclist->dmi_addr + 3); pos ^= (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val; pos &= 0x3f; mfilt[pos / 32] |= (1 << (pos % 32)); diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index eff2a158a41..37783cdd301 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -691,6 +691,10 @@ struct b43_wl { struct mutex mutex; spinlock_t irq_lock; + /* R/W lock for data transmission. + * Transmissions on 2+ queues can run concurrently, but somebody else + * might sync with TX by write_lock_irqsave()'ing. */ + rwlock_t tx_lock; /* Lock for LEDs access. */ spinlock_t leds_lock; /* Lock for SHM access. */ diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 4bf8a99099f..8fdba9415c0 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -729,6 +729,7 @@ static void b43_synchronize_irq(struct b43_wldev *dev) */ void b43_dummy_transmission(struct b43_wldev *dev) { + struct b43_wl *wl = dev->wl; struct b43_phy *phy = &dev->phy; unsigned int i, max_loop; u16 value; @@ -755,6 +756,9 @@ void b43_dummy_transmission(struct b43_wldev *dev) return; } + spin_lock_irq(&wl->irq_lock); + write_lock(&wl->tx_lock); + for (i = 0; i < 5; i++) b43_ram_write(dev, i * 4, buffer[i]); @@ -795,6 +799,9 @@ void b43_dummy_transmission(struct b43_wldev *dev) } if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5) b43_radio_write16(dev, 0x0051, 0x0037); + + write_unlock(&wl->tx_lock); + spin_unlock_irq(&wl->irq_lock); } static void key_write(struct b43_wldev *dev, @@ -2171,7 +2178,7 @@ static int b43_write_initvals(struct b43_wldev *dev, goto err_format; array_size -= sizeof(iv->data.d32); - value = be32_to_cpu(get_unaligned(&iv->data.d32)); + value = get_unaligned_be32(&iv->data.d32); b43_write32(dev, offset, value); iv = (const struct b43_iv *)((const uint8_t *)iv + @@ -2840,24 +2847,31 @@ static int b43_op_tx(struct ieee80211_hw *hw, { struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev = wl->current_dev; - int err = -ENODEV; + unsigned long flags; + int err; if (unlikely(skb->len < 2 + 2 + 6)) { /* Too short, this can't be a valid frame. */ - return -EINVAL; + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; } B43_WARN_ON(skb_shinfo(skb)->nr_frags); - if (unlikely(!dev)) - goto out; - if (unlikely(b43_status(dev) < B43_STAT_STARTED)) - goto out; - /* TX is done without a global lock. */ - if (b43_using_pio_transfers(dev)) - err = b43_pio_tx(dev, skb, ctl); - else - err = b43_dma_tx(dev, skb, ctl); -out: + return NETDEV_TX_BUSY; + + /* Transmissions on seperate queues can run concurrently. */ + read_lock_irqsave(&wl->tx_lock, flags); + + err = -ENODEV; + if (likely(b43_status(dev) >= B43_STAT_STARTED)) { + if (b43_using_pio_transfers(dev)) + err = b43_pio_tx(dev, skb, ctl); + else + err = b43_dma_tx(dev, skb, ctl); + } + + read_unlock_irqrestore(&wl->tx_lock, flags); + if (unlikely(err)) return NETDEV_TX_BUSY; return NETDEV_TX_OK; @@ -3476,7 +3490,9 @@ static void b43_wireless_core_stop(struct b43_wldev *dev) spin_unlock_irqrestore(&wl->irq_lock, flags); b43_synchronize_irq(dev); + write_lock_irqsave(&wl->tx_lock, flags); b43_set_status(dev, B43_STAT_INITIALIZED); + write_unlock_irqrestore(&wl->tx_lock, flags); b43_pio_stop(dev); mutex_unlock(&wl->mutex); @@ -3485,8 +3501,6 @@ static void b43_wireless_core_stop(struct b43_wldev *dev) cancel_delayed_work_sync(&dev->periodic_work); mutex_lock(&wl->mutex); - ieee80211_stop_queues(wl->hw); //FIXME this could cause a deadlock, as mac80211 seems buggy. - b43_mac_suspend(dev); free_irq(dev->dev->irq, dev); b43dbg(wl, "Wireless interface stopped\n"); @@ -4326,6 +4340,14 @@ static int b43_wireless_core_attach(struct b43_wldev *dev) err = -EOPNOTSUPP; goto err_powerdown; } + if (1 /* disable A-PHY */) { + /* FIXME: For now we disable the A-PHY on multi-PHY devices. */ + if (dev->phy.type != B43_PHYTYPE_N) { + have_2ghz_phy = 1; + have_5ghz_phy = 0; + } + } + dev->phy.gmode = have_2ghz_phy; tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0; b43_wireless_core_reset(dev, tmp); @@ -4490,6 +4512,7 @@ static int b43_wireless_init(struct ssb_device *dev) memset(wl, 0, sizeof(*wl)); wl->hw = hw; spin_lock_init(&wl->irq_lock); + rwlock_init(&wl->tx_lock); spin_lock_init(&wl->leds_lock); spin_lock_init(&wl->shm_lock); mutex_init(&wl->mutex); diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index ef829ee8ffd..14a5eea2573 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -1720,7 +1720,7 @@ static int b43legacy_write_initvals(struct b43legacy_wldev *dev, goto err_format; array_size -= sizeof(iv->data.d32); - value = be32_to_cpu(get_unaligned(&iv->data.d32)); + value = get_unaligned_be32(&iv->data.d32); b43legacy_write32(dev, offset, value); iv = (const struct b43legacy_iv *)((const uint8_t *)iv + diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig index 9a25f550fd1..d5b7a76fcaa 100644 --- a/drivers/net/wireless/iwlwifi/Kconfig +++ b/drivers/net/wireless/iwlwifi/Kconfig @@ -6,6 +6,10 @@ config IWLCORE tristate "Intel Wireless Wifi Core" depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL select IWLWIFI + select MAC80211_LEDS if IWLWIFI_LEDS + select LEDS_CLASS if IWLWIFI_LEDS + select RFKILL if IWLWIFI_RFKILL + select RFKILL_INPUT if IWLWIFI_RFKILL config IWLWIFI_LEDS bool @@ -14,8 +18,6 @@ config IWLWIFI_LEDS config IWLWIFI_RFKILL boolean "IWLWIFI RF kill support" depends on IWLCORE - select RFKILL - select RFKILL_INPUT config IWL4965 tristate "Intel Wireless WiFi 4965AGN" @@ -55,8 +57,6 @@ config IWL4965_HT config IWL4965_LEDS bool "Enable LEDS features in iwl4965 driver" depends on IWL4965 - select MAC80211_LEDS - select LEDS_CLASS select IWLWIFI_LEDS ---help--- This option enables LEDS for the iwlwifi drivers @@ -112,6 +112,8 @@ config IWL3945 depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL select FW_LOADER select IWLWIFI + select MAC80211_LEDS if IWL3945_LEDS + select LEDS_CLASS if IWL3945_LEDS ---help--- Select to build the driver supporting the: @@ -143,8 +145,6 @@ config IWL3945_SPECTRUM_MEASUREMENT config IWL3945_LEDS bool "Enable LEDS features in iwl3945 driver" depends on IWL3945 - select MAC80211_LEDS - select LEDS_CLASS ---help--- This option enables LEDS for the iwl3945 driver. diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index 598e4eef4f4..d3406830c8e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -554,40 +554,36 @@ static void iwl3945_add_radiotap(struct iwl3945_priv *priv, iwl3945_rt->rt_hdr.it_pad = 0; /* total header + data */ - put_unaligned(cpu_to_le16(sizeof(*iwl3945_rt)), - &iwl3945_rt->rt_hdr.it_len); + put_unaligned_le16(sizeof(*iwl3945_rt), &iwl3945_rt->rt_hdr.it_len); /* Indicate all the fields we add to the radiotap header */ - put_unaligned(cpu_to_le32((1 << IEEE80211_RADIOTAP_TSFT) | - (1 << IEEE80211_RADIOTAP_FLAGS) | - (1 << IEEE80211_RADIOTAP_RATE) | - (1 << IEEE80211_RADIOTAP_CHANNEL) | - (1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) | - (1 << IEEE80211_RADIOTAP_DBM_ANTNOISE) | - (1 << IEEE80211_RADIOTAP_ANTENNA)), - &iwl3945_rt->rt_hdr.it_present); + put_unaligned_le32((1 << IEEE80211_RADIOTAP_TSFT) | + (1 << IEEE80211_RADIOTAP_FLAGS) | + (1 << IEEE80211_RADIOTAP_RATE) | + (1 << IEEE80211_RADIOTAP_CHANNEL) | + (1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) | + (1 << IEEE80211_RADIOTAP_DBM_ANTNOISE) | + (1 << IEEE80211_RADIOTAP_ANTENNA), + &iwl3945_rt->rt_hdr.it_present); /* Zero the flags, we'll add to them as we go */ iwl3945_rt->rt_flags = 0; - put_unaligned(cpu_to_le64(tsf), &iwl3945_rt->rt_tsf); + put_unaligned_le64(tsf, &iwl3945_rt->rt_tsf); iwl3945_rt->rt_dbmsignal = signal; iwl3945_rt->rt_dbmnoise = noise; /* Convert the channel frequency and set the flags */ - put_unaligned(cpu_to_le16(stats->freq), &iwl3945_rt->rt_channelMHz); + put_unaligned_le16(stats->freq, &iwl3945_rt->rt_channelMHz); if (!(phy_flags_hw & RX_RES_PHY_FLAGS_BAND_24_MSK)) - put_unaligned(cpu_to_le16(IEEE80211_CHAN_OFDM | - IEEE80211_CHAN_5GHZ), + put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_5GHZ, &iwl3945_rt->rt_chbitmask); else if (phy_flags_hw & RX_RES_PHY_FLAGS_MOD_CCK_MSK) - put_unaligned(cpu_to_le16(IEEE80211_CHAN_CCK | - IEEE80211_CHAN_2GHZ), + put_unaligned_le16(IEEE80211_CHAN_CCK | IEEE80211_CHAN_2GHZ, &iwl3945_rt->rt_chbitmask); else /* 802.11g */ - put_unaligned(cpu_to_le16(IEEE80211_CHAN_OFDM | - IEEE80211_CHAN_2GHZ), + put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ, &iwl3945_rt->rt_chbitmask); if (rate == -1) diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h index 45c1c5533bf..c7695a215a3 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945.h @@ -742,7 +742,6 @@ struct iwl3945_priv { u8 direct_ssid_len; u8 direct_ssid[IW_ESSID_MAX_SIZE]; struct iwl3945_scan_cmd *scan; - u8 only_active_channel; /* spinlock */ spinlock_t lock; /* protect general shared data */ diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.h b/drivers/net/wireless/iwlwifi/iwl-4965.h index 9ed13cb0a2a..581b98556c8 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.h +++ b/drivers/net/wireless/iwlwifi/iwl-4965.h @@ -996,7 +996,6 @@ struct iwl_priv { u8 direct_ssid_len; u8 direct_ssid[IW_ESSID_MAX_SIZE]; struct iwl4965_scan_cmd *scan; - u8 only_active_channel; /* spinlock */ spinlock_t lock; /* protect general shared data */ diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index a1a0b3c581f..13925b627e3 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -4968,17 +4968,6 @@ static int iwl3945_get_channels_for_scan(struct iwl3945_priv *priv, if (channels[i].flags & IEEE80211_CHAN_DISABLED) continue; - if (channels[i].hw_value == - le16_to_cpu(priv->active_rxon.channel)) { - if (iwl3945_is_associated(priv)) { - IWL_DEBUG_SCAN - ("Skipping current channel %d\n", - le16_to_cpu(priv->active_rxon.channel)); - continue; - } - } else if (priv->only_active_channel) - continue; - scan_ch->channel = channels[i].hw_value; ch_info = iwl3945_get_channel_info(priv, band, scan_ch->channel); @@ -6303,12 +6292,17 @@ static void iwl3945_bg_request_scan(struct work_struct *data) priv->direct_ssid, priv->direct_ssid_len); direct_mask = 1; } else if (!iwl3945_is_associated(priv) && priv->essid_len) { + IWL_DEBUG_SCAN + ("Kicking off one direct scan for '%s' when not associated\n", + iwl3945_escape_essid(priv->essid, priv->essid_len)); scan->direct_scan[0].id = WLAN_EID_SSID; scan->direct_scan[0].len = priv->essid_len; memcpy(scan->direct_scan[0].ssid, priv->essid, priv->essid_len); direct_mask = 1; - } else + } else { + IWL_DEBUG_SCAN("Kicking off one indirect scan.\n"); direct_mask = 0; + } /* We don't build a direct scan probe request; the uCode will do * that based on the direct_mask added to each channel entry */ @@ -6346,23 +6340,18 @@ static void iwl3945_bg_request_scan(struct work_struct *data) if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) scan->filter_flags = RXON_FILTER_PROMISC_MSK; - if (direct_mask) { - IWL_DEBUG_SCAN - ("Initiating direct scan for %s.\n", - iwl3945_escape_essid(priv->essid, priv->essid_len)); + if (direct_mask) scan->channel_count = iwl3945_get_channels_for_scan( priv, band, 1, /* active */ direct_mask, (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]); - } else { - IWL_DEBUG_SCAN("Initiating indirect scan.\n"); + else scan->channel_count = iwl3945_get_channels_for_scan( priv, band, 0, /* passive */ direct_mask, (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]); - } cmd.len += le16_to_cpu(scan->tx_cmd.len) + scan->channel_count * sizeof(struct iwl3945_scan_channel); @@ -7314,8 +7303,6 @@ static void iwl3945_mac_reset_tsf(struct ieee80211_hw *hw) return; } - priv->only_active_channel = 0; - iwl3945_set_rate(priv); mutex_unlock(&priv->mutex); diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index d0bbcaaeb94..883b42f7e99 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -4633,17 +4633,6 @@ static int iwl4965_get_channels_for_scan(struct iwl_priv *priv, if (channels[i].flags & IEEE80211_CHAN_DISABLED) continue; - if (ieee80211_frequency_to_channel(channels[i].center_freq) == - le16_to_cpu(priv->active_rxon.channel)) { - if (iwl_is_associated(priv)) { - IWL_DEBUG_SCAN - ("Skipping current channel %d\n", - le16_to_cpu(priv->active_rxon.channel)); - continue; - } - } else if (priv->only_active_channel) - continue; - scan_ch->channel = ieee80211_frequency_to_channel(channels[i].center_freq); ch_info = iwl_get_channel_info(priv, band, @@ -5824,11 +5813,15 @@ static void iwl4965_bg_request_scan(struct work_struct *data) priv->direct_ssid, priv->direct_ssid_len); direct_mask = 1; } else if (!iwl_is_associated(priv) && priv->essid_len) { + IWL_DEBUG_SCAN + ("Kicking off one direct scan for '%s' when not associated\n", + iwl4965_escape_essid(priv->essid, priv->essid_len)); scan->direct_scan[0].id = WLAN_EID_SSID; scan->direct_scan[0].len = priv->essid_len; memcpy(scan->direct_scan[0].ssid, priv->essid, priv->essid_len); direct_mask = 1; } else { + IWL_DEBUG_SCAN("Kicking off one indirect scan.\n"); direct_mask = 0; } @@ -5881,23 +5874,18 @@ static void iwl4965_bg_request_scan(struct work_struct *data) if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) scan->filter_flags = RXON_FILTER_PROMISC_MSK; - if (direct_mask) { - IWL_DEBUG_SCAN - ("Initiating direct scan for %s.\n", - iwl4965_escape_essid(priv->essid, priv->essid_len)); + if (direct_mask) scan->channel_count = iwl4965_get_channels_for_scan( priv, band, 1, /* active */ direct_mask, (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]); - } else { - IWL_DEBUG_SCAN("Initiating indirect scan.\n"); + else scan->channel_count = iwl4965_get_channels_for_scan( priv, band, 0, /* passive */ direct_mask, (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]); - } cmd.len += le16_to_cpu(scan->tx_cmd.len) + scan->channel_count * sizeof(struct iwl4965_scan_channel); @@ -7061,8 +7049,6 @@ static void iwl4965_mac_reset_tsf(struct ieee80211_hw *hw) return; } - priv->only_active_channel = 0; - iwl4965_set_rate(priv); mutex_unlock(&priv->mutex); diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c index e72c97a0d6c..d448c9702a0 100644 --- a/drivers/net/wireless/libertas/scan.c +++ b/drivers/net/wireless/libertas/scan.c @@ -298,7 +298,8 @@ static int lbs_do_scan(struct lbs_private *priv, uint8_t bsstype, uint8_t *tlv; /* pointer into our current, growing TLV storage area */ lbs_deb_enter_args(LBS_DEB_SCAN, "bsstype %d, chanlist[].chan %d, chan_count %d", - bsstype, chan_list[0].channumber, chan_count); + bsstype, chan_list ? chan_list[0].channumber : -1, + chan_count); /* create the fixed part for scan command */ scan_cmd = kzalloc(MAX_SCAN_CFG_ALLOC, GFP_KERNEL); @@ -522,7 +523,7 @@ static int lbs_process_bss(struct bss_descriptor *bss, if (*bytesleft >= sizeof(beaconsize)) { /* Extract & convert beacon size from the command buffer */ - beaconsize = le16_to_cpu(get_unaligned((__le16 *)*pbeaconinfo)); + beaconsize = get_unaligned_le16(*pbeaconinfo); *bytesleft -= sizeof(beaconsize); *pbeaconinfo += sizeof(beaconsize); } diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index b41187af130..560b9c73c0b 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -363,7 +363,7 @@ static void rt2400pci_config_erp(struct rt2x00_dev *rt2x00dev, rt2x00pci_register_write(rt2x00dev, TXCSR1, reg); rt2x00pci_register_read(rt2x00dev, ARCSR2, ®); - rt2x00_set_field32(®, ARCSR2_SIGNAL, 0x00 | preamble_mask); + rt2x00_set_field32(®, ARCSR2_SIGNAL, 0x00); rt2x00_set_field32(®, ARCSR2_SERVICE, 0x04); rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 10)); rt2x00pci_register_write(rt2x00dev, ARCSR2, reg); @@ -1308,7 +1308,7 @@ static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev) if (value == LED_MODE_TXRX_ACTIVITY) { rt2x00dev->led_qual.rt2x00dev = rt2x00dev; - rt2x00dev->led_radio.type = LED_TYPE_ACTIVITY; + rt2x00dev->led_qual.type = LED_TYPE_ACTIVITY; rt2x00dev->led_qual.led_dev.brightness_set = rt2400pci_brightness_set; rt2x00dev->led_qual.led_dev.blink_set = diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index 5ade097ed45..a5ed54b6926 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -370,7 +370,7 @@ static void rt2500pci_config_erp(struct rt2x00_dev *rt2x00dev, rt2x00pci_register_write(rt2x00dev, TXCSR1, reg); rt2x00pci_register_read(rt2x00dev, ARCSR2, ®); - rt2x00_set_field32(®, ARCSR2_SIGNAL, 0x00 | preamble_mask); + rt2x00_set_field32(®, ARCSR2_SIGNAL, 0x00); rt2x00_set_field32(®, ARCSR2_SERVICE, 0x04); rt2x00_set_field32(®, ARCSR2_LENGTH, get_duration(ACK_SIZE, 10)); rt2x00pci_register_write(rt2x00dev, ARCSR2, reg); @@ -1485,7 +1485,7 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev) if (value == LED_MODE_TXRX_ACTIVITY) { rt2x00dev->led_qual.rt2x00dev = rt2x00dev; - rt2x00dev->led_radio.type = LED_TYPE_ACTIVITY; + rt2x00dev->led_qual.type = LED_TYPE_ACTIVITY; rt2x00dev->led_qual.led_dev.brightness_set = rt2500pci_brightness_set; rt2x00dev->led_qual.led_dev.blink_set = diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 6bb07b33932..fdbd0ef2be4 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1394,7 +1394,7 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev) if (value == LED_MODE_TXRX_ACTIVITY) { rt2x00dev->led_qual.rt2x00dev = rt2x00dev; - rt2x00dev->led_radio.type = LED_TYPE_ACTIVITY; + rt2x00dev->led_qual.type = LED_TYPE_ACTIVITY; rt2x00dev->led_qual.led_dev.brightness_set = rt2500usb_brightness_set; rt2x00dev->led_qual.led_dev.blink_set = diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index f8fe7a139a8..8d8657fb64d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -114,6 +114,7 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev) return status; rt2x00leds_led_radio(rt2x00dev, true); + rt2x00led_led_activity(rt2x00dev, true); __set_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags); @@ -157,6 +158,7 @@ void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev) * Disable radio. */ rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_OFF); + rt2x00led_led_activity(rt2x00dev, false); rt2x00leds_led_radio(rt2x00dev, false); } diff --git a/drivers/net/wireless/rt2x00/rt2x00leds.c b/drivers/net/wireless/rt2x00/rt2x00leds.c index 40c1f5c1b80..b362a1cf3f8 100644 --- a/drivers/net/wireless/rt2x00/rt2x00leds.c +++ b/drivers/net/wireless/rt2x00/rt2x00leds.c @@ -72,6 +72,21 @@ void rt2x00leds_led_quality(struct rt2x00_dev *rt2x00dev, int rssi) } } +void rt2x00led_led_activity(struct rt2x00_dev *rt2x00dev, bool enabled) +{ + struct rt2x00_led *led = &rt2x00dev->led_qual; + unsigned int brightness; + + if ((led->type != LED_TYPE_ACTIVITY) || !(led->flags & LED_REGISTERED)) + return; + + brightness = enabled ? LED_FULL : LED_OFF; + if (brightness != led->led_dev.brightness) { + led->led_dev.brightness_set(&led->led_dev, brightness); + led->led_dev.brightness = brightness; + } +} + void rt2x00leds_led_assoc(struct rt2x00_dev *rt2x00dev, bool enabled) { struct rt2x00_led *led = &rt2x00dev->led_assoc; diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index 5be32fffc74..41ee02cd282 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -185,6 +185,7 @@ static inline void rt2x00rfkill_resume(struct rt2x00_dev *rt2x00dev) */ #ifdef CONFIG_RT2X00_LIB_LEDS void rt2x00leds_led_quality(struct rt2x00_dev *rt2x00dev, int rssi); +void rt2x00led_led_activity(struct rt2x00_dev *rt2x00dev, bool enabled); void rt2x00leds_led_assoc(struct rt2x00_dev *rt2x00dev, bool enabled); void rt2x00leds_led_radio(struct rt2x00_dev *rt2x00dev, bool enabled); void rt2x00leds_register(struct rt2x00_dev *rt2x00dev); @@ -197,6 +198,11 @@ static inline void rt2x00leds_led_quality(struct rt2x00_dev *rt2x00dev, { } +static inline void rt2x00led_led_activity(struct rt2x00_dev *rt2x00dev, + bool enabled) +{ +} + static inline void rt2x00leds_led_assoc(struct rt2x00_dev *rt2x00dev, bool enabled) { diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 468a31c8c11..ae12dcdd3c2 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -2087,7 +2087,7 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) if (value == LED_MODE_SIGNAL_STRENGTH) { rt2x00dev->led_qual.rt2x00dev = rt2x00dev; - rt2x00dev->led_radio.type = LED_TYPE_QUALITY; + rt2x00dev->led_qual.type = LED_TYPE_QUALITY; rt2x00dev->led_qual.led_dev.brightness_set = rt61pci_brightness_set; rt2x00dev->led_qual.led_dev.blink_set = diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index a9efe25f1ea..da19a3a91f4 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -1647,7 +1647,7 @@ static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev) if (value == LED_MODE_SIGNAL_STRENGTH) { rt2x00dev->led_qual.rt2x00dev = rt2x00dev; - rt2x00dev->led_radio.type = LED_TYPE_QUALITY; + rt2x00dev->led_qual.type = LED_TYPE_QUALITY; rt2x00dev->led_qual.led_dev.brightness_set = rt73usb_brightness_set; rt2x00dev->led_qual.led_dev.blink_set = diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c index bced3fe1cf8..5dd23c93497 100644 --- a/drivers/net/wireless/strip.c +++ b/drivers/net/wireless/strip.c @@ -768,41 +768,17 @@ static __u8 *UnStuffData(__u8 * src, __u8 * end, __u8 * dst, /* General routines for STRIP */ /* - * get_baud returns the current baud rate, as one of the constants defined in - * termbits.h - * If the user has issued a baud rate override using the 'setserial' command - * and the logical current rate is set to 38.4, then the true baud rate - * currently in effect (57.6 or 115.2) is returned. - */ -static unsigned int get_baud(struct tty_struct *tty) -{ - if (!tty || !tty->termios) - return (0); - if ((tty->termios->c_cflag & CBAUD) == B38400 && tty->driver_data) { - struct async_struct *info = - (struct async_struct *) tty->driver_data; - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - return (B57600); - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - return (B115200); - } - return (tty->termios->c_cflag & CBAUD); -} - -/* * set_baud sets the baud rate to the rate defined by baudcode - * Note: The rate B38400 should be avoided, because the user may have - * issued a 'setserial' speed override to map that to a different speed. - * We could achieve a true rate of 38400 if we needed to by cancelling - * any user speed override that is in place, but that might annoy the - * user, so it is simplest to just avoid using 38400. */ -static void set_baud(struct tty_struct *tty, unsigned int baudcode) +static void set_baud(struct tty_struct *tty, speed_t baudrate) { - struct ktermios old_termios = *(tty->termios); - tty->termios->c_cflag &= ~CBAUD; /* Clear the old baud setting */ - tty->termios->c_cflag |= baudcode; /* Set the new baud setting */ - tty->driver->set_termios(tty, &old_termios); + struct ktermios old_termios; + + mutex_lock(&tty->termios_mutex); + old_termios =*(tty->termios); + tty_encode_baud_rate(tty, baudrate, baudrate); + tty->ops->set_termios(tty, &old_termios); + mutex_unlock(&tty->termios_mutex); } /* @@ -1217,7 +1193,7 @@ static void ResetRadio(struct strip *strip_info) strip_info->watchdog_doreset = jiffies + 1 * HZ; /* If the user has selected a baud rate above 38.4 see what magic we have to do */ - if (strip_info->user_baud > B38400) { + if (strip_info->user_baud > 38400) { /* * Subtle stuff: Pay attention :-) * If the serial port is currently at the user's selected (>38.4) rate, @@ -1227,17 +1203,17 @@ static void ResetRadio(struct strip *strip_info) * issued the ATS304 command last time through, so this time we restore * the user's selected rate and issue the normal starmode reset string. */ - if (strip_info->user_baud == get_baud(tty)) { + if (strip_info->user_baud == tty_get_baud_rate(tty)) { static const char b0[] = "ate0q1s304=57600\r"; static const char b1[] = "ate0q1s304=115200\r"; static const StringDescriptor baudstring[2] = { {b0, sizeof(b0) - 1} , {b1, sizeof(b1) - 1} }; - set_baud(tty, B19200); - if (strip_info->user_baud == B57600) + set_baud(tty, 19200); + if (strip_info->user_baud == 57600) s = baudstring[0]; - else if (strip_info->user_baud == B115200) + else if (strip_info->user_baud == 115200) s = baudstring[1]; else s = baudstring[1]; /* For now */ @@ -1245,7 +1221,7 @@ static void ResetRadio(struct strip *strip_info) set_baud(tty, strip_info->user_baud); } - tty->driver->write(tty, s.string, s.length); + tty->ops->write(tty, s.string, s.length); #ifdef EXT_COUNTERS strip_info->tx_ebytes += s.length; #endif @@ -1267,7 +1243,7 @@ static void strip_write_some_more(struct tty_struct *tty) if (strip_info->tx_left > 0) { int num_written = - tty->driver->write(tty, strip_info->tx_head, + tty->ops->write(tty, strip_info->tx_head, strip_info->tx_left); strip_info->tx_left -= num_written; strip_info->tx_head += num_written; @@ -2457,7 +2433,7 @@ static int strip_open_low(struct net_device *dev) strip_info->working = FALSE; strip_info->firmware_level = NoStructure; strip_info->next_command = CompatibilityCommand; - strip_info->user_baud = get_baud(strip_info->tty); + strip_info->user_baud = tty_get_baud_rate(strip_info->tty); printk(KERN_INFO "%s: Initializing Radio.\n", strip_info->dev->name); @@ -2632,6 +2608,13 @@ static int strip_open(struct tty_struct *tty) return -EEXIST; /* + * We need a write method. + */ + + if (tty->ops->write == NULL) + return -EOPNOTSUPP; + + /* * OK. Find a free STRIP channel to use. */ if ((strip_info = strip_alloc()) == NULL) @@ -2652,8 +2635,7 @@ static int strip_open(struct tty_struct *tty) tty->disc_data = strip_info; tty->receive_room = 65536; - if (tty->driver->flush_buffer) - tty->driver->flush_buffer(tty); + tty_driver_flush_buffer(tty); /* * Restore default settings diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index e34675c2f8f..5316074f39f 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -545,11 +545,11 @@ static void handle_rx_packet(struct zd_usb *usb, const u8 *buffer, * be padded. Unaligned access might also happen if the length_info * structure is not present. */ - if (get_unaligned(&length_info->tag) == cpu_to_le16(RX_LENGTH_INFO_TAG)) + if (get_unaligned_le16(&length_info->tag) == RX_LENGTH_INFO_TAG) { unsigned int l, k, n; for (i = 0, l = 0;; i++) { - k = le16_to_cpu(get_unaligned(&length_info->length[i])); + k = get_unaligned_le16(&length_info->length[i]); if (k == 0) return; n = l+k; |