diff options
Diffstat (limited to 'drivers/net/wireless')
-rw-r--r-- | drivers/net/wireless/b43/b43.h | 3 | ||||
-rw-r--r-- | drivers/net/wireless/b43/phy_lp.c | 177 | ||||
-rw-r--r-- | drivers/net/wireless/b43/phy_lp.h | 16 | ||||
-rw-r--r-- | drivers/net/wireless/b43/tables_lpphy.c | 61 | ||||
-rw-r--r-- | drivers/net/wireless/b43/tables_lpphy.h | 8 |
5 files changed, 262 insertions, 3 deletions
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index e9d60f0910b..b4573101278 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -120,6 +120,9 @@ #define B43_MMIO_IFSCTL 0x688 /* Interframe space control */ #define B43_MMIO_IFSCTL_USE_EDCF 0x0004 #define B43_MMIO_POWERUP_DELAY 0x6A8 +#define B43_MMIO_BTCOEX_CTL 0x6B4 /* Bluetooth Coexistence Control */ +#define B43_MMIO_BTCOEX_STAT 0x6B6 /* Bluetooth Coexistence Status */ +#define B43_MMIO_BTCOEX_TXCTL 0x6B8 /* Bluetooth Coexistence Transmit Control */ /* SPROM boardflags_lo values */ #define B43_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c index 94d9e8b215e..58e319d6b1e 100644 --- a/drivers/net/wireless/b43/phy_lp.c +++ b/drivers/net/wireless/b43/phy_lp.c @@ -23,6 +23,7 @@ */ #include "b43.h" +#include "main.h" #include "phy_lp.h" #include "phy_common.h" #include "tables_lpphy.h" @@ -267,13 +268,185 @@ static void lpphy_radio_init(struct b43_wldev *dev) } } +/* Read the TX power control mode from hardware. */ +static void lpphy_read_tx_pctl_mode_from_hardware(struct b43_wldev *dev) +{ + struct b43_phy_lp *lpphy = dev->phy.lp; + u16 ctl; + + ctl = b43_phy_read(dev, B43_LPPHY_TX_PWR_CTL_CMD); + switch (ctl & B43_LPPHY_TX_PWR_CTL_CMD_MODE) { + case B43_LPPHY_TX_PWR_CTL_CMD_MODE_OFF: + lpphy->txpctl_mode = B43_LPPHY_TXPCTL_OFF; + break; + case B43_LPPHY_TX_PWR_CTL_CMD_MODE_SW: + lpphy->txpctl_mode = B43_LPPHY_TXPCTL_SW; + break; + case B43_LPPHY_TX_PWR_CTL_CMD_MODE_HW: + lpphy->txpctl_mode = B43_LPPHY_TXPCTL_HW; + break; + default: + lpphy->txpctl_mode = B43_LPPHY_TXPCTL_UNKNOWN; + B43_WARN_ON(1); + break; + } +} + +/* Set the TX power control mode in hardware. */ +static void lpphy_write_tx_pctl_mode_to_hardware(struct b43_wldev *dev) +{ + struct b43_phy_lp *lpphy = dev->phy.lp; + u16 ctl; + + switch (lpphy->txpctl_mode) { + case B43_LPPHY_TXPCTL_OFF: + ctl = B43_LPPHY_TX_PWR_CTL_CMD_MODE_OFF; + break; + case B43_LPPHY_TXPCTL_HW: + ctl = B43_LPPHY_TX_PWR_CTL_CMD_MODE_HW; + break; + case B43_LPPHY_TXPCTL_SW: + ctl = B43_LPPHY_TX_PWR_CTL_CMD_MODE_SW; + break; + default: + ctl = 0; + B43_WARN_ON(1); + } + b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_CMD, + (u16)~B43_LPPHY_TX_PWR_CTL_CMD_MODE, ctl); +} + +static void lpphy_set_tx_power_control(struct b43_wldev *dev, + enum b43_lpphy_txpctl_mode mode) +{ + struct b43_phy_lp *lpphy = dev->phy.lp; + enum b43_lpphy_txpctl_mode oldmode; + + oldmode = lpphy->txpctl_mode; + lpphy_read_tx_pctl_mode_from_hardware(dev); + if (lpphy->txpctl_mode == mode) + return; + lpphy->txpctl_mode = mode; + + if (oldmode == B43_LPPHY_TXPCTL_HW) { + //TODO Update TX Power NPT + //TODO Clear all TX Power offsets + } else { + if (mode == B43_LPPHY_TXPCTL_HW) { + //TODO Recalculate target TX power + b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_CMD, + 0xFF80, lpphy->tssi_idx); + b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_NNUM, + 0x8FFF, ((u16)lpphy->tssi_npt << 16)); + //TODO Set "TSSI Transmit Count" variable to total transmitted frame count + //TODO Disable TX gain override + lpphy->tx_pwr_idx_over = -1; + } + } + if (dev->phy.rev >= 2) { + if (mode == B43_LPPHY_TXPCTL_HW) + b43_phy_maskset(dev, B43_PHY_OFDM(0xD0), 0xFD, 0x2); + else + b43_phy_maskset(dev, B43_PHY_OFDM(0xD0), 0xFD, 0); + } + lpphy_write_tx_pctl_mode_to_hardware(dev); +} + +static void lpphy_set_tx_power_by_index(struct b43_wldev *dev, u8 index) +{ + struct b43_phy_lp *lpphy = dev->phy.lp; + + lpphy->tx_pwr_idx_over = index; + if (lpphy->txpctl_mode != B43_LPPHY_TXPCTL_OFF) + lpphy_set_tx_power_control(dev, B43_LPPHY_TXPCTL_SW); + + //TODO +} + +static void lpphy_btcoex_override(struct b43_wldev *dev) +{ + b43_write16(dev, B43_MMIO_BTCOEX_CTL, 0x3); + b43_write16(dev, B43_MMIO_BTCOEX_TXCTL, 0xFF); +} + +static void lpphy_pr41573_workaround(struct b43_wldev *dev) +{ + struct b43_phy_lp *lpphy = dev->phy.lp; + u32 *saved_tab; + const unsigned int saved_tab_size = 256; + enum b43_lpphy_txpctl_mode txpctl_mode; + s8 tx_pwr_idx_over; + u16 tssi_npt, tssi_idx; + + saved_tab = kcalloc(saved_tab_size, sizeof(saved_tab[0]), GFP_KERNEL); + if (!saved_tab) { + b43err(dev->wl, "PR41573 failed. Out of memory!\n"); + return; + } + + lpphy_read_tx_pctl_mode_from_hardware(dev); + txpctl_mode = lpphy->txpctl_mode; + tx_pwr_idx_over = lpphy->tx_pwr_idx_over; + tssi_npt = lpphy->tssi_npt; + tssi_idx = lpphy->tssi_idx; + + if (dev->phy.rev < 2) { + b43_lptab_read_bulk(dev, B43_LPTAB32(10, 0x140), + saved_tab_size, saved_tab); + } else { + b43_lptab_read_bulk(dev, B43_LPTAB32(7, 0x140), + saved_tab_size, saved_tab); + } + //TODO + + kfree(saved_tab); +} + +static void lpphy_calibration(struct b43_wldev *dev) +{ + struct b43_phy_lp *lpphy = dev->phy.lp; + enum b43_lpphy_txpctl_mode saved_pctl_mode; + + b43_mac_suspend(dev); + + lpphy_btcoex_override(dev); + lpphy_read_tx_pctl_mode_from_hardware(dev); + saved_pctl_mode = lpphy->txpctl_mode; + lpphy_set_tx_power_control(dev, B43_LPPHY_TXPCTL_OFF); + //TODO Perform transmit power table I/Q LO calibration + if ((dev->phy.rev == 0) && (saved_pctl_mode != B43_LPPHY_TXPCTL_OFF)) + lpphy_pr41573_workaround(dev); + //TODO If a full calibration has not been performed on this channel yet, perform PAPD TX-power calibration + lpphy_set_tx_power_control(dev, saved_pctl_mode); + //TODO Perform I/Q calibration with a single control value set + + b43_mac_enable(dev); +} + +/* Initialize TX power control */ +static void lpphy_tx_pctl_init(struct b43_wldev *dev) +{ + if (0/*FIXME HWPCTL capable */) { + //TODO + } else { /* This device is only software TX power control capable. */ + if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) { + //TODO + } else { + //TODO + } + //TODO set BB multiplier to 0x0096 + } +} + static int b43_lpphy_op_init(struct b43_wldev *dev) { /* TODO: band SPROM */ lpphy_baseband_init(dev); lpphy_radio_init(dev); - - //TODO + //TODO calibrate RC + //TODO set channel + lpphy_tx_pctl_init(dev); + //TODO full calib return 0; } diff --git a/drivers/net/wireless/b43/phy_lp.h b/drivers/net/wireless/b43/phy_lp.h index 80703c58102..18370b4ac38 100644 --- a/drivers/net/wireless/b43/phy_lp.h +++ b/drivers/net/wireless/b43/phy_lp.h @@ -247,6 +247,10 @@ #define B43_LPPHY_FOURWIRE_CTL B43_PHY_OFDM(0xA2) /* fourwire Control */ #define B43_LPPHY_CPA_TAILCOUNT_VAL B43_PHY_OFDM(0xA3) /* CPA TailCount Value */ #define B43_LPPHY_TX_PWR_CTL_CMD B43_PHY_OFDM(0xA4) /* TX Power Control Cmd */ +#define B43_LPPHY_TX_PWR_CTL_CMD_MODE 0xE000 /* TX power control mode mask */ +#define B43_LPPHY_TX_PWR_CTL_CMD_MODE_OFF 0x0000 /* TX power control is OFF */ +#define B43_LPPHY_TX_PWR_CTL_CMD_MODE_SW 0x8000 /* TX power control is SOFTWARE */ +#define B43_LPPHY_TX_PWR_CTL_CMD_MODE_HW 0xE000 /* TX power control is HARDWARE */ #define B43_LPPHY_TX_PWR_CTL_NNUM B43_PHY_OFDM(0xA5) /* TX Power Control Nnum */ #define B43_LPPHY_TX_PWR_CTL_IDLETSSI B43_PHY_OFDM(0xA6) /* TX Power Control IdleTssi */ #define B43_LPPHY_TX_PWR_CTL_TARGETPWR B43_PHY_OFDM(0xA7) /* TX Power Control TargetPower */ @@ -802,7 +806,17 @@ +enum b43_lpphy_txpctl_mode { + B43_LPPHY_TXPCTL_UNKNOWN = 0, + B43_LPPHY_TXPCTL_OFF, /* TX power control is OFF */ + B43_LPPHY_TXPCTL_SW, /* TX power control is set to Software */ + B43_LPPHY_TXPCTL_HW, /* TX power control is set to Hardware */ +}; + struct b43_phy_lp { + /* Current TX power control mode. */ + enum b43_lpphy_txpctl_mode txpctl_mode; + /* Transmit isolation medium band */ u8 tx_isolation_med_band; /* FIXME initial value? */ /* Transmit isolation low band */ @@ -814,7 +828,7 @@ struct b43_phy_lp { u8 rx_pwr_offset; /* FIXME initial value? */ /* TSSI transmit count */ - u16 tssi_tx_count; /* FIXME initial value? */ + u16 tssi_tx_count; /* TSSI index */ u16 tssi_idx; /* FIXME initial value? */ /* TSSI npt */ diff --git a/drivers/net/wireless/b43/tables_lpphy.c b/drivers/net/wireless/b43/tables_lpphy.c index 18f6e325676..4ea734dce21 100644 --- a/drivers/net/wireless/b43/tables_lpphy.c +++ b/drivers/net/wireless/b43/tables_lpphy.c @@ -303,6 +303,36 @@ u32 b43_lptab_read(struct b43_wldev *dev, u32 offset) return value; } +void b43_lptab_read_bulk(struct b43_wldev *dev, u32 offset, + unsigned int nr_elements, void *_data) +{ + u32 type, value; + u8 *data = _data; + unsigned int i; + + type = offset & B43_LPTAB_TYPEMASK; + for (i = 0; i < nr_elements; i++) { + value = b43_lptab_read(dev, offset); + switch (type) { + case B43_LPTAB_8BIT: + *data = value; + data++; + break; + case B43_LPTAB_16BIT: + *((u16 *)data) = value; + data += 2; + break; + case B43_LPTAB_32BIT: + *((u32 *)data) = value; + data += 4; + break; + default: + B43_WARN_ON(1); + } + offset++; + } +} + void b43_lptab_write(struct b43_wldev *dev, u32 offset, u32 value) { u32 type; @@ -331,3 +361,34 @@ void b43_lptab_write(struct b43_wldev *dev, u32 offset, u32 value) B43_WARN_ON(1); } } + +void b43_lptab_write_bulk(struct b43_wldev *dev, u32 offset, + unsigned int nr_elements, const void *_data) +{ + u32 type, value; + const u8 *data = _data; + unsigned int i; + + type = offset & B43_LPTAB_TYPEMASK; + for (i = 0; i < nr_elements; i++) { + switch (type) { + case B43_LPTAB_8BIT: + value = *data; + data++; + break; + case B43_LPTAB_16BIT: + value = *((u16 *)data); + data += 2; + break; + case B43_LPTAB_32BIT: + value = *((u32 *)data); + data += 4; + break; + default: + B43_WARN_ON(1); + value = 0; + } + b43_lptab_write(dev, offset, value); + offset++; + } +} diff --git a/drivers/net/wireless/b43/tables_lpphy.h b/drivers/net/wireless/b43/tables_lpphy.h index 03ea2ff5d13..0b8d02895a5 100644 --- a/drivers/net/wireless/b43/tables_lpphy.h +++ b/drivers/net/wireless/b43/tables_lpphy.h @@ -17,6 +17,14 @@ u32 b43_lptab_read(struct b43_wldev *dev, u32 offset); void b43_lptab_write(struct b43_wldev *dev, u32 offset, u32 value); +/* Bulk table access. Note that these functions return the bulk data in + * host endianness! The returned data is _not_ a bytearray, but an array + * consisting of nr_elements of the data type. */ +void b43_lptab_read_bulk(struct b43_wldev *dev, u32 offset, + unsigned int nr_elements, void *data); +void b43_lptab_write_bulk(struct b43_wldev *dev, u32 offset, + unsigned int nr_elements, const void *data); + void b2062_upload_init_table(struct b43_wldev *dev); |