aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless')
-rw-r--r--drivers/net/wireless/Kconfig12
-rw-r--r--drivers/net/wireless/Makefile3
-rw-r--r--drivers/net/wireless/bcm43xx/bcm43xx_phy.c2
-rw-r--r--drivers/net/wireless/hostap/hostap_ap.c34
-rw-r--r--drivers/net/wireless/hostap/hostap_config.h2
-rw-r--r--drivers/net/wireless/hostap/hostap_cs.c4
-rw-r--r--drivers/net/wireless/hostap/hostap_ioctl.c2
-rw-r--r--drivers/net/wireless/hostap/hostap_main.c1
-rw-r--r--drivers/net/wireless/hostap/hostap_pci.c5
-rw-r--r--drivers/net/wireless/hostap/hostap_plx.c5
-rw-r--r--drivers/net/wireless/rtl8187.h145
-rw-r--r--drivers/net/wireless/rtl8187_dev.c731
-rw-r--r--drivers/net/wireless/rtl8187_rtl8225.c745
-rw-r--r--drivers/net/wireless/rtl8187_rtl8225.h44
-rw-r--r--drivers/net/wireless/rtl818x.h226
-rw-r--r--drivers/net/wireless/zd1211rw/Makefile2
-rw-r--r--drivers/net/wireless/zd1211rw/zd_chip.c5
-rw-r--r--drivers/net/wireless/zd1211rw/zd_chip.h3
-rw-r--r--drivers/net/wireless/zd1211rw/zd_rf.c21
-rw-r--r--drivers/net/wireless/zd1211rw/zd_rf.h28
-rw-r--r--drivers/net/wireless/zd1211rw/zd_rf_al2230.c1
-rw-r--r--drivers/net/wireless/zd1211rw/zd_rf_al7230b.c1
-rw-r--r--drivers/net/wireless/zd1211rw/zd_rf_uw2453.c534
-rw-r--r--drivers/net/wireless/zd1211rw/zd_usb.c1
24 files changed, 2506 insertions, 51 deletions
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index fa2399cbd5c..ae27af0141c 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -546,6 +546,18 @@ config USB_ZD1201
To compile this driver as a module, choose M here: the
module will be called zd1201.
+config RTL8187
+ tristate "Realtek 8187 USB support"
+ depends on MAC80211 && USB && WLAN_80211 && EXPERIMENTAL
+ select EEPROM_93CX6
+ ---help---
+ This is a driver for RTL8187 based cards.
+ These are USB based chips found in cards such as:
+
+ Netgear WG111v2
+
+ Thanks to Realtek for their support!
+
source "drivers/net/wireless/hostap/Kconfig"
source "drivers/net/wireless/bcm43xx/Kconfig"
source "drivers/net/wireless/zd1211rw/Kconfig"
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index d2124602263..ef35bc6c4a2 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -44,3 +44,6 @@ obj-$(CONFIG_PCMCIA_WL3501) += wl3501_cs.o
obj-$(CONFIG_USB_ZD1201) += zd1201.o
obj-$(CONFIG_LIBERTAS_USB) += libertas/
+
+rtl8187-objs := rtl8187_dev.o rtl8187_rtl8225.o
+obj-$(CONFIG_RTL8187) += rtl8187.o
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_phy.c b/drivers/net/wireless/bcm43xx/bcm43xx_phy.c
index b37f1e34870..d779199c30d 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_phy.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_phy.c
@@ -1638,7 +1638,7 @@ void bcm43xx_phy_set_baseband_attenuation(struct bcm43xx_private *bcm,
return;
}
- if (phy->analog > 1) {
+ if (phy->analog == 1) {
value = bcm43xx_phy_read(bcm, 0x0060) & ~0x003C;
value |= (baseband_attenuation << 2) & 0x003C;
} else {
diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c
index 5b3abd54d0e..90900525379 100644
--- a/drivers/net/wireless/hostap/hostap_ap.c
+++ b/drivers/net/wireless/hostap/hostap_ap.c
@@ -326,7 +326,6 @@ static int ap_control_proc_read(char *page, char **start, off_t off,
char *p = page;
struct ap_data *ap = (struct ap_data *) data;
char *policy_txt;
- struct list_head *ptr;
struct mac_entry *entry;
if (off != 0) {
@@ -352,14 +351,12 @@ static int ap_control_proc_read(char *page, char **start, off_t off,
p += sprintf(p, "MAC entries: %u\n", ap->mac_restrictions.entries);
p += sprintf(p, "MAC list:\n");
spin_lock_bh(&ap->mac_restrictions.lock);
- for (ptr = ap->mac_restrictions.mac_list.next;
- ptr != &ap->mac_restrictions.mac_list; ptr = ptr->next) {
+ list_for_each_entry(entry, &ap->mac_restrictions.mac_list, list) {
if (p - page > PAGE_SIZE - 80) {
p += sprintf(p, "All entries did not fit one page.\n");
break;
}
- entry = list_entry(ptr, struct mac_entry, list);
p += sprintf(p, MACSTR "\n", MAC2STR(entry->addr));
}
spin_unlock_bh(&ap->mac_restrictions.lock);
@@ -413,7 +410,6 @@ int ap_control_del_mac(struct mac_restrictions *mac_restrictions, u8 *mac)
static int ap_control_mac_deny(struct mac_restrictions *mac_restrictions,
u8 *mac)
{
- struct list_head *ptr;
struct mac_entry *entry;
int found = 0;
@@ -421,10 +417,7 @@ static int ap_control_mac_deny(struct mac_restrictions *mac_restrictions,
return 0;
spin_lock_bh(&mac_restrictions->lock);
- for (ptr = mac_restrictions->mac_list.next;
- ptr != &mac_restrictions->mac_list; ptr = ptr->next) {
- entry = list_entry(ptr, struct mac_entry, list);
-
+ list_for_each_entry(entry, &mac_restrictions->mac_list, list) {
if (memcmp(entry->addr, mac, ETH_ALEN) == 0) {
found = 1;
break;
@@ -519,7 +512,7 @@ static int prism2_ap_proc_read(char *page, char **start, off_t off,
{
char *p = page;
struct ap_data *ap = (struct ap_data *) data;
- struct list_head *ptr;
+ struct sta_info *sta;
int i;
if (off > PROC_LIMIT) {
@@ -529,9 +522,7 @@ static int prism2_ap_proc_read(char *page, char **start, off_t off,
p += sprintf(p, "# BSSID CHAN SIGNAL NOISE RATE SSID FLAGS\n");
spin_lock_bh(&ap->sta_table_lock);
- for (ptr = ap->sta_list.next; ptr != &ap->sta_list; ptr = ptr->next) {
- struct sta_info *sta = (struct sta_info *) ptr;
-
+ list_for_each_entry(sta, &ap->sta_list, list) {
if (!sta->ap)
continue;
@@ -861,7 +852,7 @@ void hostap_init_ap_proc(local_info_t *local)
void hostap_free_data(struct ap_data *ap)
{
- struct list_head *n, *ptr;
+ struct sta_info *n, *sta;
if (ap == NULL || !ap->initialized) {
printk(KERN_DEBUG "hostap_free_data: ap has not yet been "
@@ -875,8 +866,7 @@ void hostap_free_data(struct ap_data *ap)
ap->crypt = ap->crypt_priv = NULL;
#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
- list_for_each_safe(ptr, n, &ap->sta_list) {
- struct sta_info *sta = list_entry(ptr, struct sta_info, list);
+ list_for_each_entry_safe(sta, n, &ap->sta_list, list) {
ap_sta_hash_del(ap, sta);
list_del(&sta->list);
if ((sta->flags & WLAN_STA_ASSOC) && !sta->ap && sta->local)
@@ -2704,6 +2694,8 @@ ap_tx_ret hostap_handle_sta_tx(local_info_t *local, struct hostap_tx_data *tx)
if (hdr->addr1[0] & 0x01) {
/* broadcast/multicast frame - no AP related processing */
+ if (local->ap->num_sta <= 0)
+ ret = AP_TX_DROP;
goto out;
}
@@ -3198,15 +3190,14 @@ int hostap_update_rx_stats(struct ap_data *ap,
void hostap_update_rates(local_info_t *local)
{
- struct list_head *ptr;
+ struct sta_info *sta;
struct ap_data *ap = local->ap;
if (!ap)
return;
spin_lock_bh(&ap->sta_table_lock);
- for (ptr = ap->sta_list.next; ptr != &ap->sta_list; ptr = ptr->next) {
- struct sta_info *sta = (struct sta_info *) ptr;
+ list_for_each_entry(sta, &ap->sta_list, list) {
prism2_check_tx_rates(sta);
}
spin_unlock_bh(&ap->sta_table_lock);
@@ -3242,11 +3233,10 @@ void * ap_crypt_get_ptrs(struct ap_data *ap, u8 *addr, int permanent,
void hostap_add_wds_links(local_info_t *local)
{
struct ap_data *ap = local->ap;
- struct list_head *ptr;
+ struct sta_info *sta;
spin_lock_bh(&ap->sta_table_lock);
- list_for_each(ptr, &ap->sta_list) {
- struct sta_info *sta = list_entry(ptr, struct sta_info, list);
+ list_for_each_entry(sta, &ap->sta_list, list) {
if (sta->ap)
hostap_wds_link_oper(local, sta->addr, WDS_ADD);
}
diff --git a/drivers/net/wireless/hostap/hostap_config.h b/drivers/net/wireless/hostap/hostap_config.h
index c090a5aebb5..30acd39d76a 100644
--- a/drivers/net/wireless/hostap/hostap_config.h
+++ b/drivers/net/wireless/hostap/hostap_config.h
@@ -1,8 +1,6 @@
#ifndef HOSTAP_CONFIG_H
#define HOSTAP_CONFIG_H
-#define PRISM2_VERSION "0.4.4-kernel"
-
/* In the previous versions of Host AP driver, support for user space version
* of IEEE 802.11 management (hostapd) used to be disabled in the default
* configuration. From now on, support for hostapd is always included and it is
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index ee1532b62e4..30e723f6597 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -22,7 +22,6 @@
#include "hostap_wlan.h"
-static char *version = PRISM2_VERSION " (Jouni Malinen <j@w1.fi>)";
static dev_info_t dev_info = "hostap_cs";
MODULE_AUTHOR("Jouni Malinen");
@@ -30,7 +29,6 @@ MODULE_DESCRIPTION("Support for Intersil Prism2-based 802.11 wireless LAN "
"cards (PC Card).");
MODULE_SUPPORTED_DEVICE("Intersil Prism2-based WLAN cards (PC Card)");
MODULE_LICENSE("GPL");
-MODULE_VERSION(PRISM2_VERSION);
static int ignore_cis_vcc;
@@ -910,14 +908,12 @@ static struct pcmcia_driver hostap_driver = {
static int __init init_prism2_pccard(void)
{
- printk(KERN_INFO "%s: %s\n", dev_info, version);
return pcmcia_register_driver(&hostap_driver);
}
static void __exit exit_prism2_pccard(void)
{
pcmcia_unregister_driver(&hostap_driver);
- printk(KERN_INFO "%s: Driver unloaded\n", dev_info);
}
diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c
index cdea7f71b9e..8c71077d653 100644
--- a/drivers/net/wireless/hostap/hostap_ioctl.c
+++ b/drivers/net/wireless/hostap/hostap_ioctl.c
@@ -3893,8 +3893,6 @@ static void prism2_get_drvinfo(struct net_device *dev,
local = iface->local;
strncpy(info->driver, "hostap", sizeof(info->driver) - 1);
- strncpy(info->version, PRISM2_VERSION,
- sizeof(info->version) - 1);
snprintf(info->fw_version, sizeof(info->fw_version) - 1,
"%d.%d.%d", (local->sta_fw_ver >> 16) & 0xff,
(local->sta_fw_ver >> 8) & 0xff,
diff --git a/drivers/net/wireless/hostap/hostap_main.c b/drivers/net/wireless/hostap/hostap_main.c
index 4743426cf6a..446de51bab7 100644
--- a/drivers/net/wireless/hostap/hostap_main.c
+++ b/drivers/net/wireless/hostap/hostap_main.c
@@ -37,7 +37,6 @@
MODULE_AUTHOR("Jouni Malinen");
MODULE_DESCRIPTION("Host AP common routines");
MODULE_LICENSE("GPL");
-MODULE_VERSION(PRISM2_VERSION);
#define TX_TIMEOUT (2 * HZ)
diff --git a/drivers/net/wireless/hostap/hostap_pci.c b/drivers/net/wireless/hostap/hostap_pci.c
index db4899ed4bb..0cd48d151f5 100644
--- a/drivers/net/wireless/hostap/hostap_pci.c
+++ b/drivers/net/wireless/hostap/hostap_pci.c
@@ -20,7 +20,6 @@
#include "hostap_wlan.h"
-static char *version = PRISM2_VERSION " (Jouni Malinen <j@w1.fi>)";
static char *dev_info = "hostap_pci";
@@ -29,7 +28,6 @@ MODULE_DESCRIPTION("Support for Intersil Prism2.5-based 802.11 wireless LAN "
"PCI cards.");
MODULE_SUPPORTED_DEVICE("Intersil Prism2.5-based WLAN PCI cards");
MODULE_LICENSE("GPL");
-MODULE_VERSION(PRISM2_VERSION);
/* struct local_info::hw_priv */
@@ -462,8 +460,6 @@ static struct pci_driver prism2_pci_drv_id = {
static int __init init_prism2_pci(void)
{
- printk(KERN_INFO "%s: %s\n", dev_info, version);
-
return pci_register_driver(&prism2_pci_drv_id);
}
@@ -471,7 +467,6 @@ static int __init init_prism2_pci(void)
static void __exit exit_prism2_pci(void)
{
pci_unregister_driver(&prism2_pci_drv_id);
- printk(KERN_INFO "%s: Driver unloaded\n", dev_info);
}
diff --git a/drivers/net/wireless/hostap/hostap_plx.c b/drivers/net/wireless/hostap/hostap_plx.c
index f0fd5ecdb24..0183df757b3 100644
--- a/drivers/net/wireless/hostap/hostap_plx.c
+++ b/drivers/net/wireless/hostap/hostap_plx.c
@@ -23,7 +23,6 @@
#include "hostap_wlan.h"
-static char *version = PRISM2_VERSION " (Jouni Malinen <j@w1.fi>)";
static char *dev_info = "hostap_plx";
@@ -32,7 +31,6 @@ MODULE_DESCRIPTION("Support for Intersil Prism2-based 802.11 wireless LAN "
"cards (PLX).");
MODULE_SUPPORTED_DEVICE("Intersil Prism2-based WLAN cards (PLX)");
MODULE_LICENSE("GPL");
-MODULE_VERSION(PRISM2_VERSION);
static int ignore_cis;
@@ -623,8 +621,6 @@ static struct pci_driver prism2_plx_drv_id = {
static int __init init_prism2_plx(void)
{
- printk(KERN_INFO "%s: %s\n", dev_info, version);
-
return pci_register_driver(&prism2_plx_drv_id);
}
@@ -632,7 +628,6 @@ static int __init init_prism2_plx(void)
static void __exit exit_prism2_plx(void)
{
pci_unregister_driver(&prism2_plx_drv_id);
- printk(KERN_INFO "%s: Driver unloaded\n", dev_info);
}
diff --git a/drivers/net/wireless/rtl8187.h b/drivers/net/wireless/rtl8187.h
new file mode 100644
index 00000000000..6124e467b15
--- /dev/null
+++ b/drivers/net/wireless/rtl8187.h
@@ -0,0 +1,145 @@
+/*
+ * Definitions for RTL8187 hardware
+ *
+ * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
+ *
+ * Based on the r8187 driver, which is:
+ * Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef RTL8187_H
+#define RTL8187_H
+
+#include "rtl818x.h"
+
+#define RTL8187_EEPROM_TXPWR_BASE 0x05
+#define RTL8187_EEPROM_MAC_ADDR 0x07
+#define RTL8187_EEPROM_TXPWR_CHAN_1 0x16 /* 3 channels */
+#define RTL8187_EEPROM_TXPWR_CHAN_6 0x1B /* 2 channels */
+#define RTL8187_EEPROM_TXPWR_CHAN_4 0x3D /* 2 channels */
+
+#define RTL8187_REQT_READ 0xC0
+#define RTL8187_REQT_WRITE 0x40
+#define RTL8187_REQ_GET_REG 0x05
+#define RTL8187_REQ_SET_REG 0x05
+
+#define RTL8187_MAX_RX 0x9C4
+
+struct rtl8187_rx_info {
+ struct urb *urb;
+ struct ieee80211_hw *dev;
+};
+
+struct rtl8187_rx_hdr {
+ __le16 len;
+ __le16 rate;
+ u8 noise;
+ u8 signal;
+ u8 agc;
+ u8 reserved;
+ __le64 mac_time;
+} __attribute__((packed));
+
+struct rtl8187_tx_info {
+ struct ieee80211_tx_control *control;
+ struct urb *urb;
+ struct ieee80211_hw *dev;
+};
+
+struct rtl8187_tx_hdr {
+ __le32 flags;
+#define RTL8187_TX_FLAG_NO_ENCRYPT (1 << 15)
+#define RTL8187_TX_FLAG_MORE_FRAG (1 << 17)
+#define RTL8187_TX_FLAG_CTS (1 << 18)
+#define RTL8187_TX_FLAG_RTS (1 << 23)
+ __le16 rts_duration;
+ __le16 len;
+ __le32 retry;
+} __attribute__((packed));
+
+struct rtl8187_priv {
+ /* common between rtl818x drivers */
+ struct rtl818x_csr *map;
+ void (*rf_init)(struct ieee80211_hw *);
+ int mode;
+
+ /* rtl8187 specific */
+ struct ieee80211_channel channels[14];
+ struct ieee80211_rate rates[12];
+ struct ieee80211_hw_mode modes[2];
+ struct usb_device *udev;
+ u8 *hwaddr;
+ u16 txpwr_base;
+ u8 asic_rev;
+ struct sk_buff_head rx_queue;
+};
+
+void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data);
+
+static inline u8 rtl818x_ioread8(struct rtl8187_priv *priv, u8 *addr)
+{
+ u8 val;
+
+ usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
+ RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
+ (unsigned long)addr, 0, &val, sizeof(val), HZ / 2);
+
+ return val;
+}
+
+static inline u16 rtl818x_ioread16(struct rtl8187_priv *priv, __le16 *addr)
+{
+ __le16 val;
+
+ usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
+ RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
+ (unsigned long)addr, 0, &val, sizeof(val), HZ / 2);
+
+ return le16_to_cpu(val);
+}
+
+static inline u32 rtl818x_ioread32(struct rtl8187_priv *priv, __le32 *addr)
+{
+ __le32 val;
+
+ usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
+ RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
+ (unsigned long)addr, 0, &val, sizeof(val), HZ / 2);
+
+ return le32_to_cpu(val);
+}
+
+static inline void rtl818x_iowrite8(struct rtl8187_priv *priv,
+ u8 *addr, u8 val)
+{
+ usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
+ RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
+ (unsigned long)addr, 0, &val, sizeof(val), HZ / 2);
+}
+
+static inline void rtl818x_iowrite16(struct rtl8187_priv *priv,
+ __le16 *addr, u16 val)
+{
+ __le16 buf = cpu_to_le16(val);
+
+ usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
+ RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
+ (unsigned long)addr, 0, &buf, sizeof(buf), HZ / 2);
+}
+
+static inline void rtl818x_iowrite32(struct rtl8187_priv *priv,
+ __le32 *addr, u32 val)
+{
+ __le32 buf = cpu_to_le32(val);
+
+ usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
+ RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
+ (unsigned long)addr, 0, &buf, sizeof(buf), HZ / 2);
+}
+
+#endif /* RTL8187_H */
diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c
new file mode 100644
index 00000000000..cea85894b7f
--- /dev/null
+++ b/drivers/net/wireless/rtl8187_dev.c
@@ -0,0 +1,731 @@
+/*
+ * Linux device driver for RTL8187
+ *
+ * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
+ *
+ * Based on the r8187 driver, which is:
+ * Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
+ *
+ * Magic delays and register offsets below are taken from the original
+ * r8187 driver sources. Thanks to Realtek for their support!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/eeprom_93cx6.h>
+#include <net/mac80211.h>
+
+#include "rtl8187.h"
+#include "rtl8187_rtl8225.h"
+
+MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
+MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
+MODULE_DESCRIPTION("RTL8187 USB wireless driver");
+MODULE_LICENSE("GPL");
+
+static struct usb_device_id rtl8187_table[] __devinitdata = {
+ /* Realtek */
+ {USB_DEVICE(0x0bda, 0x8187)},
+ /* Netgear */
+ {USB_DEVICE(0x0846, 0x6100)},
+ {USB_DEVICE(0x0846, 0x6a00)},
+ {}
+};
+
+MODULE_DEVICE_TABLE(usb, rtl8187_table);
+
+void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data)
+{
+ struct rtl8187_priv *priv = dev->priv;
+
+ data <<= 8;
+ data |= addr | 0x80;
+
+ rtl818x_iowrite8(priv, &priv->map->PHY[3], (data >> 24) & 0xFF);
+ rtl818x_iowrite8(priv, &priv->map->PHY[2], (data >> 16) & 0xFF);
+ rtl818x_iowrite8(priv, &priv->map->PHY[1], (data >> 8) & 0xFF);
+ rtl818x_iowrite8(priv, &priv->map->PHY[0], data & 0xFF);
+
+ msleep(1);
+}
+
+static void rtl8187_tx_cb(struct urb *urb)
+{
+ struct ieee80211_tx_status status = { {0} };
+ struct sk_buff *skb = (struct sk_buff *)urb->context;
+ struct rtl8187_tx_info *info = (struct rtl8187_tx_info *)skb->cb;
+
+ usb_free_urb(info->urb);
+ if (info->control)
+ memcpy(&status.control, info->control, sizeof(status.control));
+ kfree(info->control);
+ skb_pull(skb, sizeof(struct rtl8187_tx_hdr));
+ status.flags |= IEEE80211_TX_STATUS_ACK;
+ ieee80211_tx_status_irqsafe(info->dev, skb, &status);
+}
+
+static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb,
+ struct ieee80211_tx_control *control)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ struct rtl8187_tx_hdr *hdr;
+ struct rtl8187_tx_info *info;
+ struct urb *urb;
+ u32 tmp;
+
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!urb) {
+ kfree_skb(skb);
+ return 0;
+ }
+
+ hdr = (struct rtl8187_tx_hdr *)skb_push(skb, sizeof(*hdr));
+ tmp = skb->len - sizeof(*hdr);
+ tmp |= RTL8187_TX_FLAG_NO_ENCRYPT;
+ tmp |= control->rts_cts_rate << 19;
+ tmp |= control->tx_rate << 24;
+ if (ieee80211_get_morefrag((struct ieee80211_hdr *)skb))
+ tmp |= RTL8187_TX_FLAG_MORE_FRAG;
+ if (control->flags & IEEE80211_TXCTL_USE_RTS_CTS) {
+ tmp |= RTL8187_TX_FLAG_RTS;
+ hdr->rts_duration =
+ ieee80211_rts_duration(dev, skb->len, control);
+ }
+ if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT)
+ tmp |= RTL8187_TX_FLAG_CTS;
+ hdr->flags = cpu_to_le32(tmp);
+ hdr->len = 0;
+ tmp = control->retry_limit << 8;
+ hdr->retry = cpu_to_le32(tmp);
+
+ info = (struct rtl8187_tx_info *)skb->cb;
+ info->control = kmemdup(control, sizeof(*control), GFP_ATOMIC);
+ info->urb = urb;
+ info->dev = dev;
+ usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, 2),
+ hdr, skb->len, rtl8187_tx_cb, skb);
+ usb_submit_urb(urb, GFP_ATOMIC);
+
+ return 0;
+}
+
+static void rtl8187_rx_cb(struct urb *urb)
+{
+ struct sk_buff *skb = (struct sk_buff *)urb->context;
+ struct rtl8187_rx_info *info = (struct rtl8187_rx_info *)skb->cb;
+ struct ieee80211_hw *dev = info->dev;
+ struct rtl8187_priv *priv = dev->priv;
+ struct rtl8187_rx_hdr *hdr;
+ struct ieee80211_rx_status rx_status = { 0 };
+ int rate, signal;
+
+ spin_lock(&priv->rx_queue.lock);
+ if (skb->next)
+ __skb_unlink(skb, &priv->rx_queue);
+ else {
+ spin_unlock(&priv->rx_queue.lock);
+ return;
+ }
+ spin_unlock(&priv->rx_queue.lock);
+
+ if (unlikely(urb->status)) {
+ usb_free_urb(urb);
+ dev_kfree_skb_irq(skb);
+ return;
+ }
+
+ skb_put(skb, urb->actual_length);
+ hdr = (struct rtl8187_rx_hdr *)(skb_tail_pointer(skb) - sizeof(*hdr));
+ skb_trim(skb, le16_to_cpu(hdr->len) & 0x0FFF);
+
+ signal = hdr->agc >> 1;
+ rate = (le16_to_cpu(hdr->rate) >> 4) & 0xF;
+ if (rate > 3) { /* OFDM rate */
+ if (signal > 90)
+ signal = 90;
+ else if (signal < 25)
+ signal = 25;
+ signal = 90 - signal;
+ } else { /* CCK rate */
+ if (signal > 95)
+ signal = 95;
+ else if (signal < 30)
+ signal = 30;
+ signal = 95 - signal;
+ }
+
+ rx_status.antenna = (hdr->signal >> 7) & 1;
+ rx_status.signal = 64 - min(hdr->noise, (u8)64);
+ rx_status.ssi = signal;
+ rx_status.rate = rate;
+ rx_status.freq = dev->conf.freq;
+ rx_status.channel = dev->conf.channel;
+ rx_status.phymode = dev->conf.phymode;
+ rx_status.mactime = le64_to_cpu(hdr->mac_time);
+ ieee80211_rx_irqsafe(dev, skb, &rx_status);
+
+ skb = dev_alloc_skb(RTL8187_MAX_RX);
+ if (unlikely(!skb)) {
+ usb_free_urb(urb);
+ /* TODO check rx queue length and refill *somewhere* */
+ return;
+ }
+
+ info = (struct rtl8187_rx_info *)skb->cb;
+ info->urb = urb;
+ info->dev = dev;
+ urb->transfer_buffer = skb_tail_pointer(skb);
+ urb->context = skb;
+ skb_queue_tail(&priv->rx_queue, skb);
+
+ usb_submit_urb(urb, GFP_ATOMIC);
+}
+
+static int rtl8187_init_urbs(struct ieee80211_hw *dev)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ struct urb *entry;
+ struct sk_buff *skb;
+ struct rtl8187_rx_info *info;
+
+ while (skb_queue_len(&priv->rx_queue) < 8) {
+ skb = __dev_alloc_skb(RTL8187_MAX_RX, GFP_KERNEL);
+ if (!skb)
+ break;
+ entry = usb_alloc_urb(0, GFP_KERNEL);
+ if (!entry) {
+ kfree_skb(skb);
+ break;
+ }
+ usb_fill_bulk_urb(entry, priv->udev,
+ usb_rcvbulkpipe(priv->udev, 1),
+ skb_tail_pointer(skb),
+ RTL8187_MAX_RX, rtl8187_rx_cb, skb);
+ info = (struct rtl8187_rx_info *)skb->cb;
+ info->urb = entry;
+ info->dev = dev;
+ skb_queue_tail(&priv->rx_queue, skb);
+ usb_submit_urb(entry, GFP_KERNEL);
+ }
+
+ return 0;
+}
+
+static int rtl8187_init_hw(struct ieee80211_hw *dev)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ u8 reg;
+ int i;
+
+ /* reset */
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+ rtl818x_iowrite32(priv, &priv->map->ANAPARAM, RTL8225_ANAPARAM_ON);
+ rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+ rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
+
+ msleep(200);
+ rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x10);
+ rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x11);
+ rtl818x_iowrite8(priv, (u8 *)0xFE18, 0x00);
+ msleep(200);
+
+ reg = rtl818x_ioread8(priv, &priv->map->CMD);
+ reg &= (1 << 1);
+ reg |= RTL818X_CMD_RESET;
+ rtl818x_iowrite8(priv, &priv->map->CMD, reg);
+
+ i = 10;
+ do {
+ msleep(2);
+ if (!(rtl818x_ioread8(priv, &priv->map->CMD) &
+ RTL818X_CMD_RESET))
+ break;
+ } while (--i);
+
+ if (!i) {
+ printk(KERN_ERR "%s: Reset timeout!\n", wiphy_name(dev->wiphy));
+ return -ETIMEDOUT;
+ }
+
+ /* reload registers from eeprom */
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_LOAD);
+
+ i = 10;
+ do {
+ msleep(4);
+ if (!(rtl818x_ioread8(priv, &priv->map->EEPROM_CMD) &
+ RTL818X_EEPROM_CMD_CONFIG))
+ break;
+ } while (--i);
+
+ if (!i) {
+ printk(KERN_ERR "%s: eeprom reset timeout!\n",
+ wiphy_name(dev->wiphy));
+ return -ETIMEDOUT;
+ }
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+ rtl818x_iowrite32(priv, &priv->map->ANAPARAM, RTL8225_ANAPARAM_ON);
+ rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+ /* setup card */
+ rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0);
+ rtl818x_iowrite8(priv, &priv->map->GPIO, 0);
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8));
+ rtl818x_iowrite8(priv, &priv->map->GPIO, 1);
+ rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+ for (i = 0; i < ETH_ALEN; i++)
+ rtl818x_iowrite8(priv, &priv->map->MAC[i], priv->hwaddr[i]);
+
+ rtl818x_iowrite16(priv, (__le16 *)0xFFF4, 0xFFFF);
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG1);
+ reg &= 0x3F;
+ reg |= 0x80;
+ rtl818x_iowrite8(priv, &priv->map->CONFIG1, reg);
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+ rtl818x_iowrite32(priv, &priv->map->INT_TIMEOUT, 0);
+ rtl818x_iowrite8(priv, &priv->map->WPA_CONF, 0);
+ rtl818x_iowrite8(priv, &priv->map->RATE_FALLBACK, 0x81);
+
+ // TODO: set RESP_RATE and BRSR properly
+ rtl818x_iowrite8(priv, &priv->map->RESP_RATE, (8 << 4) | 0);
+ rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
+
+ /* host_usb_init */
+ rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0);
+ rtl818x_iowrite8(priv, &priv->map->GPIO, 0);
+ reg = rtl818x_ioread8(priv, (u8 *)0xFE53);
+ rtl818x_iowrite8(priv, (u8 *)0xFE53, reg | (1 << 7));
+ rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8));
+ rtl818x_iowrite8(priv, &priv->map->GPIO, 0x20);
+ rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x80);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x80);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x80);
+ msleep(100);
+
+ rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x000a8008);
+ rtl818x_iowrite16(priv, &priv->map->BRSR, 0xFFFF);
+ rtl818x_iowrite32(priv, &priv->map->RF_PARA, 0x00100044);
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, 0x44);
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FF7);
+ msleep(100);
+
+ priv->rf_init(dev);
+
+ rtl818x_iowrite16(priv, &priv->map->BRSR, 0x01F3);
+ reg = rtl818x_ioread16(priv, &priv->map->PGSELECT) & 0xfffe;
+ rtl818x_iowrite16(priv, &priv->map->PGSELECT, reg | 0x1);
+ rtl818x_iowrite16(priv, (__le16 *)0xFFFE, 0x10);
+ rtl818x_iowrite8(priv, &priv->map->TALLY_SEL, 0x80);
+ rtl818x_iowrite8(priv, (u8 *)0xFFFF, 0x60);
+ rtl818x_iowrite16(priv, &priv->map->PGSELECT, reg);
+
+ return 0;
+}
+
+static void rtl8187_set_channel(struct ieee80211_hw *dev, int channel)
+{
+ u32 reg;
+ struct rtl8187_priv *priv = dev->priv;
+
+ reg = rtl818x_ioread32(priv, &priv->map->TX_CONF);
+ /* Enable TX loopback on MAC level to avoid TX during channel
+ * changes, as this has be seen to causes problems and the
+ * card will stop work until next reset
+ */
+ rtl818x_iowrite32(priv, &priv->map->TX_CONF,
+ reg | RTL818X_TX_CONF_LOOPBACK_MAC);
+ msleep(10);
+ rtl8225_rf_set_channel(dev, channel);
+ msleep(10);
+ rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
+}
+
+static int rtl8187_open(struct ieee80211_hw *dev)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ u32 reg;
+ int ret;
+
+ ret = rtl8187_init_hw(dev);
+ if (ret)
+ return ret;
+
+ rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF);
+
+ rtl8187_init_urbs(dev);
+
+ reg = RTL818X_RX_CONF_ONLYERLPKT |
+ RTL818X_RX_CONF_RX_AUTORESETPHY |
+ RTL818X_RX_CONF_BSSID |
+ RTL818X_RX_CONF_MGMT |
+ RTL818X_RX_CONF_CTRL |
+ RTL818X_RX_CONF_DATA |
+ (7 << 13 /* RX FIFO threshold NONE */) |
+ (7 << 10 /* MAX RX DMA */) |
+ RTL818X_RX_CONF_BROADCAST |
+ RTL818X_RX_CONF_MULTICAST |
+ RTL818X_RX_CONF_NICMAC;
+ if (priv->mode == IEEE80211_IF_TYPE_MNTR)
+ reg |= RTL818X_RX_CONF_MONITOR;
+
+ rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
+
+ reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
+ reg &= ~RTL818X_CW_CONF_PERPACKET_CW_SHIFT;
+ reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
+ rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
+
+ reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
+ reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT;
+ reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
+ reg &= ~RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
+ rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
+
+ reg = RTL818X_TX_CONF_CW_MIN |
+ (7 << 21 /* MAX TX DMA */) |
+ RTL818X_TX_CONF_NO_ICV;
+ rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
+
+ reg = rtl818x_ioread8(priv, &priv->map->CMD);
+ reg |= RTL818X_CMD_TX_ENABLE;
+ reg |= RTL818X_CMD_RX_ENABLE;
+ rtl818x_iowrite8(priv, &priv->map->CMD, reg);
+
+ return 0;
+}
+
+static int rtl8187_stop(struct ieee80211_hw *dev)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ struct rtl8187_rx_info *info;
+ struct sk_buff *skb;
+ u32 reg;
+
+ rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
+
+ reg = rtl818x_ioread8(priv, &priv->map->CMD);
+ reg &= ~RTL818X_CMD_TX_ENABLE;
+ reg &= ~RTL818X_CMD_RX_ENABLE;
+ rtl818x_iowrite8(priv, &priv->map->CMD, reg);
+
+ rtl8225_rf_stop(dev);
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG4);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF);
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+ while ((skb = skb_dequeue(&priv->rx_queue))) {
+ info = (struct rtl8187_rx_info *)skb->cb;
+ usb_kill_urb(info->urb);
+ kfree_skb(skb);
+ }
+ return 0;
+}
+
+static int rtl8187_add_interface(struct ieee80211_hw *dev,
+ struct ieee80211_if_init_conf *conf)
+{
+ struct rtl8187_priv *priv = dev->priv;
+
+ /* NOTE: using IEEE80211_IF_TYPE_MGMT to indicate no mode selected */
+ if (priv->mode != IEEE80211_IF_TYPE_MGMT)
+ return -1;
+
+ switch (conf->type) {
+ case IEEE80211_IF_TYPE_STA:
+ case IEEE80211_IF_TYPE_MNTR:
+ priv->mode = conf->type;
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ priv->hwaddr = conf->mac_addr;
+
+ return 0;
+}
+
+static void rtl8187_remove_interface(struct ieee80211_hw *dev,
+ struct ieee80211_if_init_conf *conf)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ priv->mode = IEEE80211_IF_TYPE_MGMT;
+}
+
+static int rtl8187_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ rtl8187_set_channel(dev, conf->channel);
+
+ rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22);
+
+ if (conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) {
+ rtl818x_iowrite8(priv, &priv->map->SLOT, 0x9);
+ rtl818x_iowrite8(priv, &priv->map->DIFS, 0x14);
+ rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x14);
+ rtl818x_iowrite8(priv, &priv->map->CW_VAL, 0x73);
+ } else {
+ rtl818x_iowrite8(priv, &priv->map->SLOT, 0x14);
+ rtl818x_iowrite8(priv, &priv->map->DIFS, 0x24);
+ rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x24);
+ rtl818x_iowrite8(priv, &priv->map->CW_VAL, 0xa5);
+ }
+
+ rtl818x_iowrite16(priv, &priv->map->ATIM_WND, 2);
+ rtl818x_iowrite16(priv, &priv->map->ATIMTR_INTERVAL, 100);
+ rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL, 100);
+ rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL_TIME, 100);
+ return 0;
+}
+
+static int rtl8187_config_interface(struct ieee80211_hw *dev, int if_id,
+ struct ieee80211_if_conf *conf)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ int i;
+
+ for (i = 0; i < ETH_ALEN; i++)
+ rtl818x_iowrite8(priv, &priv->map->BSSID[i], conf->bssid[i]);
+
+ if (is_valid_ether_addr(conf->bssid))
+ rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_INFRA);
+ else
+ rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_NO_LINK);
+
+ return 0;
+}
+
+static const struct ieee80211_ops rtl8187_ops = {
+ .tx = rtl8187_tx,
+ .open = rtl8187_open,
+ .stop = rtl8187_stop,
+ .add_interface = rtl8187_add_interface,
+ .remove_interface = rtl8187_remove_interface,
+ .config = rtl8187_config,
+ .config_interface = rtl8187_config_interface,
+};
+
+static void rtl8187_eeprom_register_read(struct eeprom_93cx6 *eeprom)
+{
+ struct ieee80211_hw *dev = eeprom->data;
+ struct rtl8187_priv *priv = dev->priv;
+ u8 reg = rtl818x_ioread8(priv, &priv->map->EEPROM_CMD);
+
+ eeprom->reg_data_in = reg & RTL818X_EEPROM_CMD_WRITE;
+ eeprom->reg_data_out = reg & RTL818X_EEPROM_CMD_READ;
+ eeprom->reg_data_clock = reg & RTL818X_EEPROM_CMD_CK;
+ eeprom->reg_chip_select = reg & RTL818X_EEPROM_CMD_CS;
+}
+
+static void rtl8187_eeprom_register_write(struct eeprom_93cx6 *eeprom)
+{
+ struct ieee80211_hw *dev = eeprom->data;
+ struct rtl8187_priv *priv = dev->priv;
+ u8 reg = RTL818X_EEPROM_CMD_PROGRAM;
+
+ if (eeprom->reg_data_in)
+ reg |= RTL818X_EEPROM_CMD_WRITE;
+ if (eeprom->reg_data_out)
+ reg |= RTL818X_EEPROM_CMD_READ;
+ if (eeprom->reg_data_clock)
+ reg |= RTL818X_EEPROM_CMD_CK;
+ if (eeprom->reg_chip_select)
+ reg |= RTL818X_EEPROM_CMD_CS;
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, reg);
+ udelay(10);
+}
+
+static int __devinit rtl8187_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct ieee80211_hw *dev;
+ struct rtl8187_priv *priv;
+ struct eeprom_93cx6 eeprom;
+ struct ieee80211_channel *channel;
+ u16 txpwr, reg;
+ int err, i;
+
+ dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8187_ops);
+ if (!dev) {
+ printk(KERN_ERR "rtl8187: ieee80211 alloc failed\n");
+ return -ENOMEM;
+ }
+
+ priv = dev->priv;
+
+ SET_IEEE80211_DEV(dev, &intf->dev);
+ usb_set_intfdata(intf, dev);
+ priv->udev = udev;
+
+ usb_get_dev(udev);
+
+ skb_queue_head_init(&priv->rx_queue);
+ memcpy(priv->channels, rtl818x_channels, sizeof(rtl818x_channels));
+ memcpy(priv->rates, rtl818x_rates, sizeof(rtl818x_rates));
+ priv->map = (struct rtl818x_csr *)0xFF00;
+ priv->modes[0].mode = MODE_IEEE80211G;
+ priv->modes[0].num_rates = ARRAY_SIZE(rtl818x_rates);
+ priv->modes[0].rates = priv->rates;
+ priv->modes[0].num_channels = ARRAY_SIZE(rtl818x_channels);
+ priv->modes[0].channels = priv->channels;
+ priv->modes[1].mode = MODE_IEEE80211B;
+ priv->modes[1].num_rates = 4;
+ priv->modes[1].rates = priv->rates;
+ priv->modes[1].num_channels = ARRAY_SIZE(rtl818x_channels);
+ priv->modes[1].channels = priv->channels;
+ priv->mode = IEEE80211_IF_TYPE_MGMT;
+ dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+ IEEE80211_HW_RX_INCLUDES_FCS |
+ IEEE80211_HW_WEP_INCLUDE_IV |
+ IEEE80211_HW_DATA_NULLFUNC_ACK;
+ dev->extra_tx_headroom = sizeof(struct rtl8187_tx_hdr);
+ dev->queues = 1;
+ dev->max_rssi = 65;
+ dev->max_signal = 64;
+
+ for (i = 0; i < 2; i++)
+ if ((err = ieee80211_register_hwmode(dev, &priv->modes[i])))
+ goto err_free_dev;
+
+ eeprom.data = dev;
+ eeprom.register_read = rtl8187_eeprom_register_read;
+ eeprom.register_write = rtl8187_eeprom_register_write;
+ if (rtl818x_ioread32(priv, &priv->map->RX_CONF) & (1 << 6))
+ eeprom.width = PCI_EEPROM_WIDTH_93C66;
+ else
+ eeprom.width = PCI_EEPROM_WIDTH_93C46;
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+ udelay(10);
+
+ eeprom_93cx6_multiread(&eeprom, RTL8187_EEPROM_MAC_ADDR,
+ (__le16 __force *)dev->wiphy->perm_addr, 3);
+ if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
+ printk(KERN_WARNING "rtl8187: Invalid hwaddr! Using randomly "
+ "generated MAC address\n");
+ random_ether_addr(dev->wiphy->perm_addr);
+ }
+
+ channel = priv->channels;
+ for (i = 0; i < 3; i++) {
+ eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_1 + i,
+ &txpwr);
+ (*channel++).val = txpwr & 0xFF;
+ (*channel++).val = txpwr >> 8;
+ }
+ for (i = 0; i < 2; i++) {
+ eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_4 + i,
+ &txpwr);
+ (*channel++).val = txpwr & 0xFF;
+ (*channel++).val = txpwr >> 8;
+ }
+ for (i = 0; i < 2; i++) {
+ eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_6 + i,
+ &txpwr);
+ (*channel++).val = txpwr & 0xFF;
+ (*channel++).val = txpwr >> 8;
+ }
+
+ eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_BASE,
+ &priv->txpwr_base);
+
+ reg = rtl818x_ioread16(priv, &priv->map->PGSELECT) & ~1;
+ rtl818x_iowrite16(priv, &priv->map->PGSELECT, reg | 1);
+ /* 0 means asic B-cut, we should use SW 3 wire
+ * bit-by-bit banging for radio. 1 means we can use
+ * USB specific request to write radio registers */
+ priv->asic_rev = rtl818x_ioread8(priv, (u8 *)0xFFFE) & 0x3;
+ rtl818x_iowrite16(priv, &priv->map->PGSELECT, reg);
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+ rtl8225_write(dev, 0, 0x1B7);
+
+ if (rtl8225_read(dev, 8) != 0x588 || rtl8225_read(dev, 9) != 0x700)
+ priv->rf_init = rtl8225_rf_init;
+ else
+ priv->rf_init = rtl8225z2_rf_init;
+
+ rtl8225_write(dev, 0, 0x0B7);
+
+ err = ieee80211_register_hw(dev);
+ if (err) {
+ printk(KERN_ERR "rtl8187: Cannot register device\n");
+ goto err_free_dev;
+ }
+
+ printk(KERN_INFO "%s: hwaddr " MAC_FMT ", rtl8187 V%d + %s\n",
+ wiphy_name(dev->wiphy), MAC_ARG(dev->wiphy->perm_addr),
+ priv->asic_rev, priv->rf_init == rtl8225_rf_init ?
+ "rtl8225" : "rtl8225z2");
+
+ return 0;
+
+ err_free_dev:
+ ieee80211_free_hw(dev);
+ usb_set_intfdata(intf, NULL);
+ usb_put_dev(udev);
+ return err;
+}
+
+static void __devexit rtl8187_disconnect(struct usb_interface *intf)
+{
+ struct ieee80211_hw *dev = usb_get_intfdata(intf);
+ struct rtl8187_priv *priv;
+
+ if (!dev)
+ return;
+
+ ieee80211_unregister_hw(dev);
+
+ priv = dev->priv;
+ usb_put_dev(interface_to_usbdev(intf));
+ ieee80211_free_hw(dev);
+}
+
+static struct usb_driver rtl8187_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = rtl8187_table,
+ .probe = rtl8187_probe,
+ .disconnect = rtl8187_disconnect,
+};
+
+static int __init rtl8187_init(void)
+{
+ return usb_register(&rtl8187_driver);
+}
+
+static void __exit rtl8187_exit(void)
+{
+ usb_deregister(&rtl8187_driver);
+}
+
+module_init(rtl8187_init);
+module_exit(rtl8187_exit);
diff --git a/drivers/net/wireless/rtl8187_rtl8225.c b/drivers/net/wireless/rtl8187_rtl8225.c
new file mode 100644
index 00000000000..e25a09f1b06
--- /dev/null
+++ b/drivers/net/wireless/rtl8187_rtl8225.c
@@ -0,0 +1,745 @@
+/*
+ * Radio tuning for RTL8225 on RTL8187
+ *
+ * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
+ *
+ * Based on the r8187 driver, which is:
+ * Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
+ *
+ * Magic delays, register offsets, and phy value tables below are
+ * taken from the original r8187 driver sources. Thanks to Realtek
+ * for their support!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <net/mac80211.h>
+
+#include "rtl8187.h"
+#include "rtl8187_rtl8225.h"
+
+static void rtl8225_write_bitbang(struct ieee80211_hw *dev, u8 addr, u16 data)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ u16 reg80, reg84, reg82;
+ u32 bangdata;
+ int i;
+
+ bangdata = (data << 4) | (addr & 0xf);
+
+ reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput) & 0xfff3;
+ reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable);
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x7);
+
+ reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x7);
+ udelay(10);
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+ udelay(2);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
+ udelay(10);
+
+ for (i = 15; i >= 0; i--) {
+ u16 reg = reg80 | (bangdata & (1 << i)) >> i;
+
+ if (i & 1)
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg | (1 << 1));
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg | (1 << 1));
+
+ if (!(i & 1))
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
+ }
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+ udelay(10);
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+ rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84);
+ msleep(2);
+}
+
+static void rtl8225_write_8051(struct ieee80211_hw *dev, u8 addr, u16 data)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ u16 reg80, reg82, reg84;
+
+ reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput);
+ reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable);
+ reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect);
+
+ reg80 &= ~(0x3 << 2);
+ reg84 &= ~0xF;
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x0007);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x0007);
+ udelay(10);
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+ udelay(2);
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
+ udelay(10);
+
+ usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
+ RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
+ addr, 0x8225, &data, sizeof(data), HZ / 2);
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+ udelay(10);
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+ rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84);
+ msleep(2);
+}
+
+void rtl8225_write(struct ieee80211_hw *dev, u8 addr, u16 data)
+{
+ struct rtl8187_priv *priv = dev->priv;
+
+ if (priv->asic_rev)
+ rtl8225_write_8051(dev, addr, data);
+ else
+ rtl8225_write_bitbang(dev, addr, data);
+}
+
+u16 rtl8225_read(struct ieee80211_hw *dev, u8 addr)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ u16 reg80, reg82, reg84, out;
+ int i;
+
+ reg80 = rtl818x_ioread16(priv, &priv->map->RFPinsOutput);
+ reg82 = rtl818x_ioread16(priv, &priv->map->RFPinsEnable);
+ reg84 = rtl818x_ioread16(priv, &priv->map->RFPinsSelect);
+
+ reg80 &= ~0xF;
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82 | 0x000F);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84 | 0x000F);
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
+ udelay(4);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
+ udelay(5);
+
+ for (i = 4; i >= 0; i--) {
+ u16 reg = reg80 | ((addr >> i) & 1);
+
+ if (!(i & 1)) {
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
+ udelay(1);
+ }
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+ reg | (1 << 1));
+ udelay(2);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+ reg | (1 << 1));
+ udelay(2);
+
+ if (i & 1) {
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg);
+ udelay(1);
+ }
+ }
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+ reg80 | (1 << 3) | (1 << 1));
+ udelay(2);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+ reg80 | (1 << 3));
+ udelay(2);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+ reg80 | (1 << 3));
+ udelay(2);
+
+ out = 0;
+ for (i = 11; i >= 0; i--) {
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+ reg80 | (1 << 3));
+ udelay(1);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+ reg80 | (1 << 3) | (1 << 1));
+ udelay(2);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+ reg80 | (1 << 3) | (1 << 1));
+ udelay(2);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+ reg80 | (1 << 3) | (1 << 1));
+ udelay(2);
+
+ if (rtl818x_ioread16(priv, &priv->map->RFPinsInput) & (1 << 1))
+ out |= 1 << i;
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+ reg80 | (1 << 3));
+ udelay(2);
+ }
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput,
+ reg80 | (1 << 3) | (1 << 2));
+ udelay(2);
+
+ rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, reg82);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, reg84);
+ rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x03A0);
+
+ return out;
+}
+
+static const u16 rtl8225bcd_rxgain[] = {
+ 0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409,
+ 0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541,
+ 0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583,
+ 0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644,
+ 0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688,
+ 0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745,
+ 0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789,
+ 0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793,
+ 0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d,
+ 0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9,
+ 0x07aa, 0x07ab, 0x07ac, 0x07ad, 0x07b0, 0x07b1, 0x07b2, 0x07b3,
+ 0x07b4, 0x07b5, 0x07b8, 0x07b9, 0x07ba, 0x07bb, 0x07bb
+};
+
+static const u8 rtl8225_agc[] = {
+ 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e,
+ 0x9d, 0x9c, 0x9b, 0x9a, 0x99, 0x98, 0x97, 0x96,
+ 0x95, 0x94, 0x93, 0x92, 0x91, 0x90, 0x8f, 0x8e,
+ 0x8d, 0x8c, 0x8b, 0x8a, 0x89, 0x88, 0x87, 0x86,
+ 0x85, 0x84, 0x83, 0x82, 0x81, 0x80, 0x3f, 0x3e,
+ 0x3d, 0x3c, 0x3b, 0x3a, 0x39, 0x38, 0x37, 0x36,
+ 0x35, 0x34, 0x33, 0x32, 0x31, 0x30, 0x2f, 0x2e,
+ 0x2d, 0x2c, 0x2b, 0x2a, 0x29, 0x28, 0x27, 0x26,
+ 0x25, 0x24, 0x23, 0x22, 0x21, 0x20, 0x1f, 0x1e,
+ 0x1d, 0x1c, 0x1b, 0x1a, 0x19, 0x18, 0x17, 0x16,
+ 0x15, 0x14, 0x13, 0x12, 0x11, 0x10, 0x0f, 0x0e,
+ 0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08, 0x07, 0x06,
+ 0x05, 0x04, 0x03, 0x02, 0x01, 0x01, 0x01, 0x01,
+ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01
+};
+
+static const u8 rtl8225_gain[] = {
+ 0x23, 0x88, 0x7c, 0xa5, /* -82dBm */
+ 0x23, 0x88, 0x7c, 0xb5, /* -82dBm */
+ 0x23, 0x88, 0x7c, 0xc5, /* -82dBm */
+ 0x33, 0x80, 0x79, 0xc5, /* -78dBm */
+ 0x43, 0x78, 0x76, 0xc5, /* -74dBm */
+ 0x53, 0x60, 0x73, 0xc5, /* -70dBm */
+ 0x63, 0x58, 0x70, 0xc5, /* -66dBm */
+};
+
+static const u8 rtl8225_threshold[] = {
+ 0x8d, 0x8d, 0x8d, 0x8d, 0x9d, 0xad, 0xbd
+};
+
+static const u8 rtl8225_tx_gain_cck_ofdm[] = {
+ 0x02, 0x06, 0x0e, 0x1e, 0x3e, 0x7e
+};
+
+static const u8 rtl8225_tx_power_cck[] = {
+ 0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02,
+ 0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02,
+ 0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02,
+ 0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02,
+ 0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03,
+ 0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03
+};
+
+static const u8 rtl8225_tx_power_cck_ch14[] = {
+ 0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00,
+ 0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00,
+ 0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00,
+ 0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00,
+ 0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00,
+ 0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00
+};
+
+static const u8 rtl8225_tx_power_ofdm[] = {
+ 0x80, 0x90, 0xa2, 0xb5, 0xcb, 0xe4
+};
+
+static const u32 rtl8225_chan[] = {
+ 0x085c, 0x08dc, 0x095c, 0x09dc, 0x0a5c, 0x0adc, 0x0b5c,
+ 0x0bdc, 0x0c5c, 0x0cdc, 0x0d5c, 0x0ddc, 0x0e5c, 0x0f72
+};
+
+static void rtl8225_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ u8 cck_power, ofdm_power;
+ const u8 *tmp;
+ u32 reg;
+ int i;
+
+ cck_power = priv->channels[channel - 1].val & 0xF;
+ ofdm_power = priv->channels[channel - 1].val >> 4;
+
+ cck_power = min(cck_power, (u8)11);
+ ofdm_power = min(ofdm_power, (u8)35);
+
+ rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK,
+ rtl8225_tx_gain_cck_ofdm[cck_power / 6] >> 1);
+
+ if (channel == 14)
+ tmp = &rtl8225_tx_power_cck_ch14[(cck_power % 6) * 8];
+ else
+ tmp = &rtl8225_tx_power_cck[(cck_power % 6) * 8];
+
+ for (i = 0; i < 8; i++)
+ rtl8225_write_phy_cck(dev, 0x44 + i, *tmp++);
+
+ msleep(1); // FIXME: optional?
+
+ /* anaparam2 on */
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+ rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+ rtl8225_write_phy_ofdm(dev, 2, 0x42);
+ rtl8225_write_phy_ofdm(dev, 6, 0x00);
+ rtl8225_write_phy_ofdm(dev, 8, 0x00);
+
+ rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM,
+ rtl8225_tx_gain_cck_ofdm[ofdm_power / 6] >> 1);
+
+ tmp = &rtl8225_tx_power_ofdm[ofdm_power % 6];
+
+ rtl8225_write_phy_ofdm(dev, 5, *tmp);
+ rtl8225_write_phy_ofdm(dev, 7, *tmp);
+
+ msleep(1);
+}
+
+void rtl8225_rf_init(struct ieee80211_hw *dev)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ int i;
+
+ rtl8225_write(dev, 0x0, 0x067); msleep(1);
+ rtl8225_write(dev, 0x1, 0xFE0); msleep(1);
+ rtl8225_write(dev, 0x2, 0x44D); msleep(1);
+ rtl8225_write(dev, 0x3, 0x441); msleep(1);
+ rtl8225_write(dev, 0x4, 0x486); msleep(1);
+ rtl8225_write(dev, 0x5, 0xBC0); msleep(1);
+ rtl8225_write(dev, 0x6, 0xAE6); msleep(1);
+ rtl8225_write(dev, 0x7, 0x82A); msleep(1);
+ rtl8225_write(dev, 0x8, 0x01F); msleep(1);
+ rtl8225_write(dev, 0x9, 0x334); msleep(1);
+ rtl8225_write(dev, 0xA, 0xFD4); msleep(1);
+ rtl8225_write(dev, 0xB, 0x391); msleep(1);
+ rtl8225_write(dev, 0xC, 0x050); msleep(1);
+ rtl8225_write(dev, 0xD, 0x6DB); msleep(1);
+ rtl8225_write(dev, 0xE, 0x029); msleep(1);
+ rtl8225_write(dev, 0xF, 0x914); msleep(100);
+
+ rtl8225_write(dev, 0x2, 0xC4D); msleep(200);
+ rtl8225_write(dev, 0x2, 0x44D); msleep(200);
+
+ if (!(rtl8225_read(dev, 6) & (1 << 7))) {
+ rtl8225_write(dev, 0x02, 0x0c4d);
+ msleep(200);
+ rtl8225_write(dev, 0x02, 0x044d);
+ msleep(100);
+ if (!(rtl8225_read(dev, 6) & (1 << 7)))
+ printk(KERN_WARNING "%s: RF Calibration Failed! %x\n",
+ wiphy_name(dev->wiphy), rtl8225_read(dev, 6));
+ }
+
+ rtl8225_write(dev, 0x0, 0x127);
+
+ for (i = 0; i < ARRAY_SIZE(rtl8225bcd_rxgain); i++) {
+ rtl8225_write(dev, 0x1, i + 1);
+ rtl8225_write(dev, 0x2, rtl8225bcd_rxgain[i]);
+ }
+
+ rtl8225_write(dev, 0x0, 0x027);
+ rtl8225_write(dev, 0x0, 0x22F);
+
+ for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) {
+ rtl8225_write_phy_ofdm(dev, 0xB, rtl8225_agc[i]);
+ msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0xA, 0x80 + i);
+ msleep(1);
+ }
+
+ msleep(1);
+
+ rtl8225_write_phy_ofdm(dev, 0x00, 0x01); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x01, 0x02); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x02, 0x42); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x03, 0x00); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x04, 0x00); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x05, 0x00); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x06, 0x40); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x07, 0x00); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x08, 0x40); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x09, 0xfe); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x0a, 0x09); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x0b, 0x80); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x0c, 0x01); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x0e, 0xd3); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x0f, 0x38); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x10, 0x84); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x11, 0x06); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x12, 0x20); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x13, 0x20); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x14, 0x00); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x15, 0x40); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x16, 0x00); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x17, 0x40); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x18, 0xef); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x19, 0x19); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x1a, 0x20); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x1b, 0x76); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x1c, 0x04); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x1e, 0x95); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x1f, 0x75); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x20, 0x1f); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x21, 0x27); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x22, 0x16); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x24, 0x46); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x25, 0x20); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x27, 0x88); msleep(1);
+
+ rtl8225_write_phy_ofdm(dev, 0x0d, rtl8225_gain[2 * 4]);
+ rtl8225_write_phy_ofdm(dev, 0x1b, rtl8225_gain[2 * 4 + 2]);
+ rtl8225_write_phy_ofdm(dev, 0x1d, rtl8225_gain[2 * 4 + 3]);
+ rtl8225_write_phy_ofdm(dev, 0x23, rtl8225_gain[2 * 4 + 1]);
+
+ rtl8225_write_phy_cck(dev, 0x00, 0x98); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x03, 0x20); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x04, 0x7e); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x05, 0x12); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x06, 0xfc); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x07, 0x78); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x08, 0x2e); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x10, 0x9b); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x11, 0x88); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x12, 0x47); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x13, 0xd0);
+ rtl8225_write_phy_cck(dev, 0x19, 0x00);
+ rtl8225_write_phy_cck(dev, 0x1a, 0xa0);
+ rtl8225_write_phy_cck(dev, 0x1b, 0x08);
+ rtl8225_write_phy_cck(dev, 0x40, 0x86);
+ rtl8225_write_phy_cck(dev, 0x41, 0x8d); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x42, 0x15); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x43, 0x18); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x44, 0x1f); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x45, 0x1e); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x46, 0x1a); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x47, 0x15); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x48, 0x10); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x49, 0x0a); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x4a, 0x05); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x4b, 0x02); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x4c, 0x05); msleep(1);
+
+ rtl818x_iowrite8(priv, &priv->map->TESTR, 0x0D);
+
+ rtl8225_rf_set_tx_power(dev, 1);
+
+ /* RX antenna default to A */
+ rtl8225_write_phy_cck(dev, 0x10, 0x9b); msleep(1); /* B: 0xDB */
+ rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1); /* B: 0x10 */
+
+ rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03); /* B: 0x00 */
+ msleep(1);
+ rtl818x_iowrite32(priv, (__le32 *)0xFF94, 0x3dc00002);
+
+ /* set sensitivity */
+ rtl8225_write(dev, 0x0c, 0x50);
+ rtl8225_write_phy_ofdm(dev, 0x0d, rtl8225_gain[2 * 4]);
+ rtl8225_write_phy_ofdm(dev, 0x1b, rtl8225_gain[2 * 4 + 2]);
+ rtl8225_write_phy_ofdm(dev, 0x1d, rtl8225_gain[2 * 4 + 3]);
+ rtl8225_write_phy_ofdm(dev, 0x23, rtl8225_gain[2 * 4 + 1]);
+ rtl8225_write_phy_cck(dev, 0x41, rtl8225_threshold[2]);
+}
+
+static const u8 rtl8225z2_tx_power_cck_ch14[] = {
+ 0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00
+};
+
+static const u8 rtl8225z2_tx_power_cck[] = {
+ 0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04
+};
+
+static const u8 rtl8225z2_tx_power_ofdm[] = {
+ 0x42, 0x00, 0x40, 0x00, 0x40
+};
+
+static const u8 rtl8225z2_tx_gain_cck_ofdm[] = {
+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05,
+ 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b,
+ 0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11,
+ 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
+ 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d,
+ 0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23
+};
+
+static void rtl8225z2_rf_set_tx_power(struct ieee80211_hw *dev, int channel)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ u8 cck_power, ofdm_power;
+ const u8 *tmp;
+ u32 reg;
+ int i;
+
+ cck_power = priv->channels[channel - 1].val & 0xF;
+ ofdm_power = priv->channels[channel - 1].val >> 4;
+
+ cck_power = min(cck_power, (u8)15);
+ cck_power += priv->txpwr_base & 0xF;
+ cck_power = min(cck_power, (u8)35);
+
+ ofdm_power = min(ofdm_power, (u8)15);
+ ofdm_power += priv->txpwr_base >> 4;
+ ofdm_power = min(ofdm_power, (u8)35);
+
+ if (channel == 14)
+ tmp = rtl8225z2_tx_power_cck_ch14;
+ else
+ tmp = rtl8225z2_tx_power_cck;
+
+ for (i = 0; i < 8; i++)
+ rtl8225_write_phy_cck(dev, 0x44 + i, *tmp++);
+
+ rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK,
+ rtl8225z2_tx_gain_cck_ofdm[cck_power]);
+ msleep(1);
+
+ /* anaparam2 on */
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+ rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_ON);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+
+ rtl8225_write_phy_ofdm(dev, 2, 0x42);
+ rtl8225_write_phy_ofdm(dev, 5, 0x00);
+ rtl8225_write_phy_ofdm(dev, 6, 0x40);
+ rtl8225_write_phy_ofdm(dev, 7, 0x00);
+ rtl8225_write_phy_ofdm(dev, 8, 0x40);
+
+ rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM,
+ rtl8225z2_tx_gain_cck_ofdm[ofdm_power]);
+ msleep(1);
+}
+
+static const u16 rtl8225z2_rxgain[] = {
+ 0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409,
+ 0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541,
+ 0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583,
+ 0x0584, 0x0585, 0x0588, 0x0589, 0x058a, 0x058b, 0x0643, 0x0644,
+ 0x0645, 0x0680, 0x0681, 0x0682, 0x0683, 0x0684, 0x0685, 0x0688,
+ 0x0689, 0x068a, 0x068b, 0x068c, 0x0742, 0x0743, 0x0744, 0x0745,
+ 0x0780, 0x0781, 0x0782, 0x0783, 0x0784, 0x0785, 0x0788, 0x0789,
+ 0x078a, 0x078b, 0x078c, 0x078d, 0x0790, 0x0791, 0x0792, 0x0793,
+ 0x0794, 0x0795, 0x0798, 0x0799, 0x079a, 0x079b, 0x079c, 0x079d,
+ 0x07a0, 0x07a1, 0x07a2, 0x07a3, 0x07a4, 0x07a5, 0x07a8, 0x07a9,
+ 0x03aa, 0x03ab, 0x03ac, 0x03ad, 0x03b0, 0x03b1, 0x03b2, 0x03b3,
+ 0x03b4, 0x03b5, 0x03b8, 0x03b9, 0x03ba, 0x03bb, 0x03bb
+};
+
+static const u8 rtl8225z2_gain_bg[] = {
+ 0x23, 0x15, 0xa5, /* -82-1dBm */
+ 0x23, 0x15, 0xb5, /* -82-2dBm */
+ 0x23, 0x15, 0xc5, /* -82-3dBm */
+ 0x33, 0x15, 0xc5, /* -78dBm */
+ 0x43, 0x15, 0xc5, /* -74dBm */
+ 0x53, 0x15, 0xc5, /* -70dBm */
+ 0x63, 0x15, 0xc5 /* -66dBm */
+};
+
+void rtl8225z2_rf_init(struct ieee80211_hw *dev)
+{
+ struct rtl8187_priv *priv = dev->priv;
+ int i;
+
+ rtl8225_write(dev, 0x0, 0x2BF); msleep(1);
+ rtl8225_write(dev, 0x1, 0xEE0); msleep(1);
+ rtl8225_write(dev, 0x2, 0x44D); msleep(1);
+ rtl8225_write(dev, 0x3, 0x441); msleep(1);
+ rtl8225_write(dev, 0x4, 0x8C3); msleep(1);
+ rtl8225_write(dev, 0x5, 0xC72); msleep(1);
+ rtl8225_write(dev, 0x6, 0x0E6); msleep(1);
+ rtl8225_write(dev, 0x7, 0x82A); msleep(1);
+ rtl8225_write(dev, 0x8, 0x03F); msleep(1);
+ rtl8225_write(dev, 0x9, 0x335); msleep(1);
+ rtl8225_write(dev, 0xa, 0x9D4); msleep(1);
+ rtl8225_write(dev, 0xb, 0x7BB); msleep(1);
+ rtl8225_write(dev, 0xc, 0x850); msleep(1);
+ rtl8225_write(dev, 0xd, 0xCDF); msleep(1);
+ rtl8225_write(dev, 0xe, 0x02B); msleep(1);
+ rtl8225_write(dev, 0xf, 0x114); msleep(100);
+
+ rtl8225_write(dev, 0x0, 0x1B7);
+
+ for (i = 0; i < ARRAY_SIZE(rtl8225z2_rxgain); i++) {
+ rtl8225_write(dev, 0x1, i + 1);
+ rtl8225_write(dev, 0x2, rtl8225z2_rxgain[i]);
+ }
+
+ rtl8225_write(dev, 0x3, 0x080);
+ rtl8225_write(dev, 0x5, 0x004);
+ rtl8225_write(dev, 0x0, 0x0B7);
+ rtl8225_write(dev, 0x2, 0xc4D);
+
+ msleep(200);
+ rtl8225_write(dev, 0x2, 0x44D);
+ msleep(100);
+
+ if (!(rtl8225_read(dev, 6) & (1 << 7))) {
+ rtl8225_write(dev, 0x02, 0x0C4D);
+ msleep(200);
+ rtl8225_write(dev, 0x02, 0x044D);
+ msleep(100);
+ if (!(rtl8225_read(dev, 6) & (1 << 7)))
+ printk(KERN_WARNING "%s: RF Calibration Failed! %x\n",
+ wiphy_name(dev->wiphy), rtl8225_read(dev, 6));
+ }
+
+ msleep(200);
+
+ rtl8225_write(dev, 0x0, 0x2BF);
+
+ for (i = 0; i < ARRAY_SIZE(rtl8225_agc); i++) {
+ rtl8225_write_phy_ofdm(dev, 0xB, rtl8225_agc[i]);
+ msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0xA, 0x80 + i);
+ msleep(1);
+ }
+
+ msleep(1);
+
+ rtl8225_write_phy_ofdm(dev, 0x00, 0x01); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x01, 0x02); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x02, 0x42); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x03, 0x00); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x04, 0x00); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x05, 0x00); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x06, 0x40); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x07, 0x00); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x08, 0x40); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x09, 0xfe); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x0a, 0x08); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x0b, 0x80); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x0c, 0x01); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x0d, 0x43);
+ rtl8225_write_phy_ofdm(dev, 0x0e, 0xd3); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x0f, 0x38); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x10, 0x84); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x11, 0x07); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x12, 0x20); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x13, 0x20); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x14, 0x00); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x15, 0x40); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x16, 0x00); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x17, 0x40); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x18, 0xef); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x19, 0x19); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x1a, 0x20); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x1b, 0x15); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x1c, 0x04); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x1d, 0xc5); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x1e, 0x95); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x1f, 0x75); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x20, 0x1f); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x21, 0x17); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x22, 0x16); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x23, 0x80); msleep(1); //FIXME: not needed?
+ rtl8225_write_phy_ofdm(dev, 0x24, 0x46); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x25, 0x00); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1);
+ rtl8225_write_phy_ofdm(dev, 0x27, 0x88); msleep(1);
+
+ rtl8225_write_phy_ofdm(dev, 0x0b, rtl8225z2_gain_bg[4 * 3]);
+ rtl8225_write_phy_ofdm(dev, 0x1b, rtl8225z2_gain_bg[4 * 3 + 1]);
+ rtl8225_write_phy_ofdm(dev, 0x1d, rtl8225z2_gain_bg[4 * 3 + 2]);
+ rtl8225_write_phy_ofdm(dev, 0x21, 0x37);
+
+ rtl8225_write_phy_cck(dev, 0x00, 0x98); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x03, 0x20); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x04, 0x7e); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x05, 0x12); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x06, 0xfc); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x07, 0x78); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x08, 0x2e); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x10, 0x9b); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x11, 0x88); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x12, 0x47); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x13, 0xd0);
+ rtl8225_write_phy_cck(dev, 0x19, 0x00);
+ rtl8225_write_phy_cck(dev, 0x1a, 0xa0);
+ rtl8225_write_phy_cck(dev, 0x1b, 0x08);
+ rtl8225_write_phy_cck(dev, 0x40, 0x86);
+ rtl8225_write_phy_cck(dev, 0x41, 0x8d); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x42, 0x15); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x43, 0x18); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x44, 0x36); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x45, 0x35); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x46, 0x2e); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x47, 0x25); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x48, 0x1c); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x49, 0x12); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x4a, 0x09); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x4b, 0x04); msleep(1);
+ rtl8225_write_phy_cck(dev, 0x4c, 0x05); msleep(1);
+
+ rtl818x_iowrite8(priv, (u8 *)0xFF5B, 0x0D); msleep(1);
+
+ rtl8225z2_rf_set_tx_power(dev, 1);
+
+ /* RX antenna default to A */
+ rtl8225_write_phy_cck(dev, 0x10, 0x9b); msleep(1); /* B: 0xDB */
+ rtl8225_write_phy_ofdm(dev, 0x26, 0x90); msleep(1); /* B: 0x10 */
+
+ rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03); /* B: 0x00 */
+ msleep(1);
+ rtl818x_iowrite32(priv, (__le32 *)0xFF94, 0x3dc00002);
+}
+
+void rtl8225_rf_stop(struct ieee80211_hw *dev)
+{
+ u8 reg;
+ struct rtl8187_priv *priv = dev->priv;
+
+ rtl8225_write(dev, 0x4, 0x1f); msleep(1);
+
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
+ reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
+ rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, RTL8225_ANAPARAM2_OFF);
+ rtl818x_iowrite32(priv, &priv->map->ANAPARAM, RTL8225_ANAPARAM_OFF);
+ rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
+ rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+}
+
+void rtl8225_rf_set_channel(struct ieee80211_hw *dev, int channel)
+{
+ struct rtl8187_priv *priv = dev->priv;
+
+ if (priv->rf_init == rtl8225_rf_init)
+ rtl8225_rf_set_tx_power(dev, channel);
+ else
+ rtl8225z2_rf_set_tx_power(dev, channel);
+
+ rtl8225_write(dev, 0x7, rtl8225_chan[channel - 1]);
+ msleep(10);
+}
diff --git a/drivers/net/wireless/rtl8187_rtl8225.h b/drivers/net/wireless/rtl8187_rtl8225.h
new file mode 100644
index 00000000000..798ba4a9737
--- /dev/null
+++ b/drivers/net/wireless/rtl8187_rtl8225.h
@@ -0,0 +1,44 @@
+/*
+ * Radio tuning definitions for RTL8225 on RTL8187
+ *
+ * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
+ *
+ * Based on the r8187 driver, which is:
+ * Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef RTL8187_RTL8225_H
+#define RTL8187_RTL8225_H
+
+#define RTL8225_ANAPARAM_ON 0xa0000a59
+#define RTL8225_ANAPARAM2_ON 0x860c7312
+#define RTL8225_ANAPARAM_OFF 0xa00beb59
+#define RTL8225_ANAPARAM2_OFF 0x840dec11
+
+void rtl8225_write(struct ieee80211_hw *, u8 addr, u16 data);
+u16 rtl8225_read(struct ieee80211_hw *, u8 addr);
+
+void rtl8225_rf_init(struct ieee80211_hw *);
+void rtl8225z2_rf_init(struct ieee80211_hw *);
+void rtl8225_rf_stop(struct ieee80211_hw *);
+void rtl8225_rf_set_channel(struct ieee80211_hw *, int);
+
+
+static inline void rtl8225_write_phy_ofdm(struct ieee80211_hw *dev,
+ u8 addr, u32 data)
+{
+ rtl8187_write_phy(dev, addr, data);
+}
+
+static inline void rtl8225_write_phy_cck(struct ieee80211_hw *dev,
+ u8 addr, u32 data)
+{
+ rtl8187_write_phy(dev, addr, data | 0x10000);
+}
+
+#endif /* RTL8187_RTL8225_H */
diff --git a/drivers/net/wireless/rtl818x.h b/drivers/net/wireless/rtl818x.h
new file mode 100644
index 00000000000..283de30628e
--- /dev/null
+++ b/drivers/net/wireless/rtl818x.h
@@ -0,0 +1,226 @@
+/*
+ * Definitions for RTL818x hardware
+ *
+ * Copyright 2007 Michael Wu <flamingice@sourmilk.net>
+ * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
+ *
+ * Based on the r8187 driver, which is:
+ * Copyright 2005 Andrea Merello <andreamrl@tiscali.it>, et al.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef RTL818X_H
+#define RTL818X_H
+
+struct rtl818x_csr {
+ u8 MAC[6];
+ u8 reserved_0[2];
+ __le32 MAR[2];
+ u8 RX_FIFO_COUNT;
+ u8 reserved_1;
+ u8 TX_FIFO_COUNT;
+ u8 BQREQ;
+ u8 reserved_2[4];
+ __le32 TSFT[2];
+ __le32 TLPDA;
+ __le32 TNPDA;
+ __le32 THPDA;
+ __le16 BRSR;
+ u8 BSSID[6];
+ u8 RESP_RATE;
+ u8 EIFS;
+ u8 reserved_3[1];
+ u8 CMD;
+#define RTL818X_CMD_TX_ENABLE (1 << 2)
+#define RTL818X_CMD_RX_ENABLE (1 << 3)
+#define RTL818X_CMD_RESET (1 << 4)
+ u8 reserved_4[4];
+ __le16 INT_MASK;
+ __le16 INT_STATUS;
+#define RTL818X_INT_RX_OK (1 << 0)
+#define RTL818X_INT_RX_ERR (1 << 1)
+#define RTL818X_INT_TXL_OK (1 << 2)
+#define RTL818X_INT_TXL_ERR (1 << 3)
+#define RTL818X_INT_RX_DU (1 << 4)
+#define RTL818X_INT_RX_FO (1 << 5)
+#define RTL818X_INT_TXN_OK (1 << 6)
+#define RTL818X_INT_TXN_ERR (1 << 7)
+#define RTL818X_INT_TXH_OK (1 << 8)
+#define RTL818X_INT_TXH_ERR (1 << 9)
+#define RTL818X_INT_TXB_OK (1 << 10)
+#define RTL818X_INT_TXB_ERR (1 << 11)
+#define RTL818X_INT_ATIM (1 << 12)
+#define RTL818X_INT_BEACON (1 << 13)
+#define RTL818X_INT_TIME_OUT (1 << 14)
+#define RTL818X_INT_TX_FO (1 << 15)
+ __le32 TX_CONF;
+#define RTL818X_TX_CONF_LOOPBACK_MAC (1 << 17)
+#define RTL818X_TX_CONF_NO_ICV (1 << 19)
+#define RTL818X_TX_CONF_DISCW (1 << 20)
+#define RTL818X_TX_CONF_R8180_ABCD (2 << 25)
+#define RTL818X_TX_CONF_R8180_F (3 << 25)
+#define RTL818X_TX_CONF_R8185_ABC (4 << 25)
+#define RTL818X_TX_CONF_R8185_D (5 << 25)
+#define RTL818X_TX_CONF_HWVER_MASK (7 << 25)
+#define RTL818X_TX_CONF_CW_MIN (1 << 31)
+ __le32 RX_CONF;
+#define RTL818X_RX_CONF_MONITOR (1 << 0)
+#define RTL818X_RX_CONF_NICMAC (1 << 1)
+#define RTL818X_RX_CONF_MULTICAST (1 << 2)
+#define RTL818X_RX_CONF_BROADCAST (1 << 3)
+#define RTL818X_RX_CONF_DATA (1 << 18)
+#define RTL818X_RX_CONF_CTRL (1 << 19)
+#define RTL818X_RX_CONF_MGMT (1 << 20)
+#define RTL818X_RX_CONF_BSSID (1 << 23)
+#define RTL818X_RX_CONF_RX_AUTORESETPHY (1 << 28)
+#define RTL818X_RX_CONF_ONLYERLPKT (1 << 31)
+ __le32 INT_TIMEOUT;
+ __le32 TBDA;
+ u8 EEPROM_CMD;
+#define RTL818X_EEPROM_CMD_READ (1 << 0)
+#define RTL818X_EEPROM_CMD_WRITE (1 << 1)
+#define RTL818X_EEPROM_CMD_CK (1 << 2)
+#define RTL818X_EEPROM_CMD_CS (1 << 3)
+#define RTL818X_EEPROM_CMD_NORMAL (0 << 6)
+#define RTL818X_EEPROM_CMD_LOAD (1 << 6)
+#define RTL818X_EEPROM_CMD_PROGRAM (2 << 6)
+#define RTL818X_EEPROM_CMD_CONFIG (3 << 6)
+ u8 CONFIG0;
+ u8 CONFIG1;
+ u8 CONFIG2;
+ __le32 ANAPARAM;
+ u8 MSR;
+#define RTL818X_MSR_NO_LINK (0 << 2)
+#define RTL818X_MSR_ADHOC (1 << 2)
+#define RTL818X_MSR_INFRA (2 << 2)
+ u8 CONFIG3;
+#define RTL818X_CONFIG3_ANAPARAM_WRITE (1 << 6)
+ u8 CONFIG4;
+#define RTL818X_CONFIG4_POWEROFF (1 << 6)
+#define RTL818X_CONFIG4_VCOOFF (1 << 7)
+ u8 TESTR;
+ u8 reserved_9[2];
+ __le16 PGSELECT;
+ __le32 ANAPARAM2;
+ u8 reserved_10[12];
+ __le16 BEACON_INTERVAL;
+ __le16 ATIM_WND;
+ __le16 BEACON_INTERVAL_TIME;
+ __le16 ATIMTR_INTERVAL;
+ u8 reserved_11[4];
+ u8 PHY[4];
+ __le16 RFPinsOutput;
+ __le16 RFPinsEnable;
+ __le16 RFPinsSelect;
+ __le16 RFPinsInput;
+ __le32 RF_PARA;
+ __le32 RF_TIMING;
+ u8 GP_ENABLE;
+ u8 GPIO;
+ u8 reserved_12[10];
+ u8 TX_AGC_CTL;
+#define RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT (1 << 0)
+#define RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT (1 << 1)
+#define RTL818X_TX_AGC_CTL_FEEDBACK_ANT (1 << 2)
+ u8 TX_GAIN_CCK;
+ u8 TX_GAIN_OFDM;
+ u8 TX_ANTENNA;
+ u8 reserved_13[16];
+ u8 WPA_CONF;
+ u8 reserved_14[3];
+ u8 SIFS;
+ u8 DIFS;
+ u8 SLOT;
+ u8 reserved_15[5];
+ u8 CW_CONF;
+#define RTL818X_CW_CONF_PERPACKET_CW_SHIFT (1 << 0)
+#define RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT (1 << 1)
+ u8 CW_VAL;
+ u8 RATE_FALLBACK;
+ u8 reserved_16[25];
+ u8 CONFIG5;
+ u8 TX_DMA_POLLING;
+ u8 reserved_17[2];
+ __le16 CWR;
+ u8 RETRY_CTR;
+ u8 reserved_18[5];
+ __le32 RDSAR;
+ u8 reserved_19[18];
+ u16 TALLY_CNT;
+ u8 TALLY_SEL;
+} __attribute__((packed));
+
+static const struct ieee80211_rate rtl818x_rates[] = {
+ { .rate = 10,
+ .val = 0,
+ .flags = IEEE80211_RATE_CCK },
+ { .rate = 20,
+ .val = 1,
+ .flags = IEEE80211_RATE_CCK },
+ { .rate = 55,
+ .val = 2,
+ .flags = IEEE80211_RATE_CCK },
+ { .rate = 110,
+ .val = 3,
+ .flags = IEEE80211_RATE_CCK },
+ { .rate = 60,
+ .val = 4,
+ .flags = IEEE80211_RATE_OFDM },
+ { .rate = 90,
+ .val = 5,
+ .flags = IEEE80211_RATE_OFDM },
+ { .rate = 120,
+ .val = 6,
+ .flags = IEEE80211_RATE_OFDM },
+ { .rate = 180,
+ .val = 7,
+ .flags = IEEE80211_RATE_OFDM },
+ { .rate = 240,
+ .val = 8,
+ .flags = IEEE80211_RATE_OFDM },
+ { .rate = 360,
+ .val = 9,
+ .flags = IEEE80211_RATE_OFDM },
+ { .rate = 480,
+ .val = 10,
+ .flags = IEEE80211_RATE_OFDM },
+ { .rate = 540,
+ .val = 11,
+ .flags = IEEE80211_RATE_OFDM },
+};
+
+static const struct ieee80211_channel rtl818x_channels[] = {
+ { .chan = 1,
+ .freq = 2412},
+ { .chan = 2,
+ .freq = 2417},
+ { .chan = 3,
+ .freq = 2422},
+ { .chan = 4,
+ .freq = 2427},
+ { .chan = 5,
+ .freq = 2432},
+ { .chan = 6,
+ .freq = 2437},
+ { .chan = 7,
+ .freq = 2442},
+ { .chan = 8,
+ .freq = 2447},
+ { .chan = 9,
+ .freq = 2452},
+ { .chan = 10,
+ .freq = 2457},
+ { .chan = 11,
+ .freq = 2462},
+ { .chan = 12,
+ .freq = 2467},
+ { .chan = 13,
+ .freq = 2472},
+ { .chan = 14,
+ .freq = 2484}
+};
+
+#endif /* RTL818X_H */
diff --git a/drivers/net/wireless/zd1211rw/Makefile b/drivers/net/wireless/zd1211rw/Makefile
index 6603ad5be63..4d505903352 100644
--- a/drivers/net/wireless/zd1211rw/Makefile
+++ b/drivers/net/wireless/zd1211rw/Makefile
@@ -3,7 +3,7 @@ obj-$(CONFIG_ZD1211RW) += zd1211rw.o
zd1211rw-objs := zd_chip.o zd_ieee80211.o \
zd_mac.o zd_netdev.o \
zd_rf_al2230.o zd_rf_rf2959.o \
- zd_rf_al7230b.o \
+ zd_rf_al7230b.o zd_rf_uw2453.o \
zd_rf.o zd_usb.o zd_util.o
ifeq ($(CONFIG_ZD1211RW_DEBUG),y)
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c
index 95b4a2a2670..5b624bfc01a 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.c
+++ b/drivers/net/wireless/zd1211rw/zd_chip.c
@@ -1253,6 +1253,9 @@ static int update_channel_integration_and_calibration(struct zd_chip *chip,
{
int r;
+ if (!zd_rf_should_update_pwr_int(&chip->rf))
+ return 0;
+
r = update_pwr_int(chip, channel);
if (r)
return r;
@@ -1283,7 +1286,7 @@ static int patch_cck_gain(struct zd_chip *chip)
int r;
u32 value;
- if (!chip->patch_cck_gain)
+ if (!chip->patch_cck_gain || !zd_rf_should_patch_cck_gain(&chip->rf))
return 0;
ZD_ASSERT(mutex_is_locked(&chip->mutex));
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h
index ce0a5f6da0d..79d0288c193 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.h
+++ b/drivers/net/wireless/zd1211rw/zd_chip.h
@@ -608,6 +608,9 @@ enum {
#define CR_ZD1211B_TXOP CTL_REG(0x0b20)
#define CR_ZD1211B_RETRY_MAX CTL_REG(0x0b28)
+/* Used to detect PLL lock */
+#define UW2453_INTR_REG ((zd_addr_t)0x85c1)
+
#define CWIN_SIZE 0x007f043f
diff --git a/drivers/net/wireless/zd1211rw/zd_rf.c b/drivers/net/wireless/zd1211rw/zd_rf.c
index 549c23bcd6c..7407409b60b 100644
--- a/drivers/net/wireless/zd1211rw/zd_rf.c
+++ b/drivers/net/wireless/zd1211rw/zd_rf.c
@@ -52,34 +52,38 @@ const char *zd_rf_name(u8 type)
void zd_rf_init(struct zd_rf *rf)
{
memset(rf, 0, sizeof(*rf));
+
+ /* default to update channel integration, as almost all RF's do want
+ * this */
+ rf->update_channel_int = 1;
}
void zd_rf_clear(struct zd_rf *rf)
{
+ if (rf->clear)
+ rf->clear(rf);
ZD_MEMCLEAR(rf, sizeof(*rf));
}
int zd_rf_init_hw(struct zd_rf *rf, u8 type)
{
- int r, t;
+ int r = 0;
+ int t;
struct zd_chip *chip = zd_rf_to_chip(rf);
ZD_ASSERT(mutex_is_locked(&chip->mutex));
switch (type) {
case RF2959_RF:
r = zd_rf_init_rf2959(rf);
- if (r)
- return r;
break;
case AL2230_RF:
r = zd_rf_init_al2230(rf);
- if (r)
- return r;
break;
case AL7230B_RF:
r = zd_rf_init_al7230b(rf);
- if (r)
- return r;
+ break;
+ case UW2453_RF:
+ r = zd_rf_init_uw2453(rf);
break;
default:
dev_err(zd_chip_dev(chip),
@@ -88,6 +92,9 @@ int zd_rf_init_hw(struct zd_rf *rf, u8 type)
return -ENODEV;
}
+ if (r)
+ return r;
+
rf->type = type;
r = zd_chip_lock_phy_regs(chip);
diff --git a/drivers/net/wireless/zd1211rw/zd_rf.h b/drivers/net/wireless/zd1211rw/zd_rf.h
index aa9cc105ce6..c6dfd8227f6 100644
--- a/drivers/net/wireless/zd1211rw/zd_rf.h
+++ b/drivers/net/wireless/zd1211rw/zd_rf.h
@@ -48,12 +48,26 @@ struct zd_rf {
u8 channel;
+ /* whether channel integration and calibration should be updated
+ * defaults to 1 (yes) */
+ u8 update_channel_int:1;
+
+ /* whether CR47 should be patched from the EEPROM, if the appropriate
+ * flag is set in the POD. The vendor driver suggests that this should
+ * be done for all RF's, but a bug in their code prevents but their
+ * HW_OverWritePhyRegFromE2P() routine from ever taking effect. */
+ u8 patch_cck_gain:1;
+
+ /* private RF driver data */
+ void *priv;
+
/* RF-specific functions */
int (*init_hw)(struct zd_rf *rf);
int (*set_channel)(struct zd_rf *rf, u8 channel);
int (*switch_radio_on)(struct zd_rf *rf);
int (*switch_radio_off)(struct zd_rf *rf);
int (*patch_6m_band_edge)(struct zd_rf *rf, u8 channel);
+ void (*clear)(struct zd_rf *rf);
};
const char *zd_rf_name(u8 type);
@@ -71,10 +85,24 @@ int zd_switch_radio_off(struct zd_rf *rf);
int zd_rf_patch_6m_band_edge(struct zd_rf *rf, u8 channel);
int zd_rf_generic_patch_6m(struct zd_rf *rf, u8 channel);
+static inline int zd_rf_should_update_pwr_int(struct zd_rf *rf)
+{
+ return rf->update_channel_int;
+}
+
+static inline int zd_rf_should_patch_cck_gain(struct zd_rf *rf)
+{
+ return rf->patch_cck_gain;
+}
+
+int zd_rf_patch_6m_band_edge(struct zd_rf *rf, u8 channel);
+int zd_rf_generic_patch_6m(struct zd_rf *rf, u8 channel);
+
/* Functions for individual RF chips */
int zd_rf_init_rf2959(struct zd_rf *rf);
int zd_rf_init_al2230(struct zd_rf *rf);
int zd_rf_init_al7230b(struct zd_rf *rf);
+int zd_rf_init_uw2453(struct zd_rf *rf);
#endif /* _ZD_RF_H */
diff --git a/drivers/net/wireless/zd1211rw/zd_rf_al2230.c b/drivers/net/wireless/zd1211rw/zd_rf_al2230.c
index 511392acfed..e7a4ecf7b6e 100644
--- a/drivers/net/wireless/zd1211rw/zd_rf_al2230.c
+++ b/drivers/net/wireless/zd1211rw/zd_rf_al2230.c
@@ -432,5 +432,6 @@ int zd_rf_init_al2230(struct zd_rf *rf)
rf->switch_radio_on = zd1211_al2230_switch_radio_on;
}
rf->patch_6m_band_edge = zd_rf_generic_patch_6m;
+ rf->patch_cck_gain = 1;
return 0;
}
diff --git a/drivers/net/wireless/zd1211rw/zd_rf_al7230b.c b/drivers/net/wireless/zd1211rw/zd_rf_al7230b.c
index 5e5e9ddc6a7..f4e8b6ada85 100644
--- a/drivers/net/wireless/zd1211rw/zd_rf_al7230b.c
+++ b/drivers/net/wireless/zd1211rw/zd_rf_al7230b.c
@@ -483,6 +483,7 @@ int zd_rf_init_al7230b(struct zd_rf *rf)
rf->switch_radio_on = zd1211_al7230b_switch_radio_on;
rf->set_channel = zd1211_al7230b_set_channel;
rf->patch_6m_band_edge = zd_rf_generic_patch_6m;
+ rf->patch_cck_gain = 1;
}
rf->switch_radio_off = al7230b_switch_radio_off;
diff --git a/drivers/net/wireless/zd1211rw/zd_rf_uw2453.c b/drivers/net/wireless/zd1211rw/zd_rf_uw2453.c
new file mode 100644
index 00000000000..414e40d571a
--- /dev/null
+++ b/drivers/net/wireless/zd1211rw/zd_rf_uw2453.c
@@ -0,0 +1,534 @@
+/* zd_rf_uw2453.c: Functions for the UW2453 RF controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+
+#include "zd_rf.h"
+#include "zd_usb.h"
+#include "zd_chip.h"
+
+/* This RF programming code is based upon the code found in v2.16.0.0 of the
+ * ZyDAS vendor driver. Unlike other RF's, Ubec publish full technical specs
+ * for this RF on their website, so we're able to understand more than
+ * usual as to what is going on. Thumbs up for Ubec for doing that. */
+
+/* The 3-wire serial interface provides access to 8 write-only registers.
+ * The data format is a 4 bit register address followed by a 20 bit value. */
+#define UW2453_REGWRITE(reg, val) ((((reg) & 0xf) << 20) | ((val) & 0xfffff))
+
+/* For channel tuning, we have to configure registers 1 (synthesizer), 2 (synth
+ * fractional divide ratio) and 3 (VCO config).
+ *
+ * We configure the RF to produce an interrupt when the PLL is locked onto
+ * the configured frequency. During initialization, we run through a variety
+ * of different VCO configurations on channel 1 until we detect a PLL lock.
+ * When this happens, we remember which VCO configuration produced the lock
+ * and use it later. Actually, we use the configuration *after* the one that
+ * produced the lock, which seems odd, but it works.
+ *
+ * If we do not see a PLL lock on any standard VCO config, we fall back on an
+ * autocal configuration, which has a fixed (as opposed to per-channel) VCO
+ * config and different synth values from the standard set (divide ratio
+ * is still shared with the standard set). */
+
+/* The per-channel synth values for all standard VCO configurations. These get
+ * written to register 1. */
+static const u8 uw2453_std_synth[] = {
+ RF_CHANNEL( 1) = 0x47,
+ RF_CHANNEL( 2) = 0x47,
+ RF_CHANNEL( 3) = 0x67,
+ RF_CHANNEL( 4) = 0x67,
+ RF_CHANNEL( 5) = 0x67,
+ RF_CHANNEL( 6) = 0x67,
+ RF_CHANNEL( 7) = 0x57,
+ RF_CHANNEL( 8) = 0x57,
+ RF_CHANNEL( 9) = 0x57,
+ RF_CHANNEL(10) = 0x57,
+ RF_CHANNEL(11) = 0x77,
+ RF_CHANNEL(12) = 0x77,
+ RF_CHANNEL(13) = 0x77,
+ RF_CHANNEL(14) = 0x4f,
+};
+
+/* This table stores the synthesizer fractional divide ratio for *all* VCO
+ * configurations (both standard and autocal). These get written to register 2.
+ */
+static const u16 uw2453_synth_divide[] = {
+ RF_CHANNEL( 1) = 0x999,
+ RF_CHANNEL( 2) = 0x99b,
+ RF_CHANNEL( 3) = 0x998,
+ RF_CHANNEL( 4) = 0x99a,
+ RF_CHANNEL( 5) = 0x999,
+ RF_CHANNEL( 6) = 0x99b,
+ RF_CHANNEL( 7) = 0x998,
+ RF_CHANNEL( 8) = 0x99a,
+ RF_CHANNEL( 9) = 0x999,
+ RF_CHANNEL(10) = 0x99b,
+ RF_CHANNEL(11) = 0x998,
+ RF_CHANNEL(12) = 0x99a,
+ RF_CHANNEL(13) = 0x999,
+ RF_CHANNEL(14) = 0xccc,
+};
+
+/* Here is the data for all the standard VCO configurations. We shrink our
+ * table a little by observing that both channels in a consecutive pair share
+ * the same value. We also observe that the high 4 bits ([0:3] in the specs)
+ * are all 'Reserved' and are always set to 0x4 - we chop them off in the data
+ * below. */
+#define CHAN_TO_PAIRIDX(a) ((a - 1) / 2)
+#define RF_CHANPAIR(a,b) [CHAN_TO_PAIRIDX(a)]
+static const u16 uw2453_std_vco_cfg[][7] = {
+ { /* table 1 */
+ RF_CHANPAIR( 1, 2) = 0x664d,
+ RF_CHANPAIR( 3, 4) = 0x604d,
+ RF_CHANPAIR( 5, 6) = 0x6675,
+ RF_CHANPAIR( 7, 8) = 0x6475,
+ RF_CHANPAIR( 9, 10) = 0x6655,
+ RF_CHANPAIR(11, 12) = 0x6455,
+ RF_CHANPAIR(13, 14) = 0x6665,
+ },
+ { /* table 2 */
+ RF_CHANPAIR( 1, 2) = 0x666d,
+ RF_CHANPAIR( 3, 4) = 0x606d,
+ RF_CHANPAIR( 5, 6) = 0x664d,
+ RF_CHANPAIR( 7, 8) = 0x644d,
+ RF_CHANPAIR( 9, 10) = 0x6675,
+ RF_CHANPAIR(11, 12) = 0x6475,
+ RF_CHANPAIR(13, 14) = 0x6655,
+ },
+ { /* table 3 */
+ RF_CHANPAIR( 1, 2) = 0x665d,
+ RF_CHANPAIR( 3, 4) = 0x605d,
+ RF_CHANPAIR( 5, 6) = 0x666d,
+ RF_CHANPAIR( 7, 8) = 0x646d,
+ RF_CHANPAIR( 9, 10) = 0x664d,
+ RF_CHANPAIR(11, 12) = 0x644d,
+ RF_CHANPAIR(13, 14) = 0x6675,
+ },
+ { /* table 4 */
+ RF_CHANPAIR( 1, 2) = 0x667d,
+ RF_CHANPAIR( 3, 4) = 0x607d,
+ RF_CHANPAIR( 5, 6) = 0x665d,
+ RF_CHANPAIR( 7, 8) = 0x645d,
+ RF_CHANPAIR( 9, 10) = 0x666d,
+ RF_CHANPAIR(11, 12) = 0x646d,
+ RF_CHANPAIR(13, 14) = 0x664d,
+ },
+ { /* table 5 */
+ RF_CHANPAIR( 1, 2) = 0x6643,
+ RF_CHANPAIR( 3, 4) = 0x6043,
+ RF_CHANPAIR( 5, 6) = 0x667d,
+ RF_CHANPAIR( 7, 8) = 0x647d,
+ RF_CHANPAIR( 9, 10) = 0x665d,
+ RF_CHANPAIR(11, 12) = 0x645d,
+ RF_CHANPAIR(13, 14) = 0x666d,
+ },
+ { /* table 6 */
+ RF_CHANPAIR( 1, 2) = 0x6663,
+ RF_CHANPAIR( 3, 4) = 0x6063,
+ RF_CHANPAIR( 5, 6) = 0x6643,
+ RF_CHANPAIR( 7, 8) = 0x6443,
+ RF_CHANPAIR( 9, 10) = 0x667d,
+ RF_CHANPAIR(11, 12) = 0x647d,
+ RF_CHANPAIR(13, 14) = 0x665d,
+ },
+ { /* table 7 */
+ RF_CHANPAIR( 1, 2) = 0x6653,
+ RF_CHANPAIR( 3, 4) = 0x6053,
+ RF_CHANPAIR( 5, 6) = 0x6663,
+ RF_CHANPAIR( 7, 8) = 0x6463,
+ RF_CHANPAIR( 9, 10) = 0x6643,
+ RF_CHANPAIR(11, 12) = 0x6443,
+ RF_CHANPAIR(13, 14) = 0x667d,
+ },
+ { /* table 8 */
+ RF_CHANPAIR( 1, 2) = 0x6673,
+ RF_CHANPAIR( 3, 4) = 0x6073,
+ RF_CHANPAIR( 5, 6) = 0x6653,
+ RF_CHANPAIR( 7, 8) = 0x6453,
+ RF_CHANPAIR( 9, 10) = 0x6663,
+ RF_CHANPAIR(11, 12) = 0x6463,
+ RF_CHANPAIR(13, 14) = 0x6643,
+ },
+ { /* table 9 */
+ RF_CHANPAIR( 1, 2) = 0x664b,
+ RF_CHANPAIR( 3, 4) = 0x604b,
+ RF_CHANPAIR( 5, 6) = 0x6673,
+ RF_CHANPAIR( 7, 8) = 0x6473,
+ RF_CHANPAIR( 9, 10) = 0x6653,
+ RF_CHANPAIR(11, 12) = 0x6453,
+ RF_CHANPAIR(13, 14) = 0x6663,
+ },
+ { /* table 10 */
+ RF_CHANPAIR( 1, 2) = 0x666b,
+ RF_CHANPAIR( 3, 4) = 0x606b,
+ RF_CHANPAIR( 5, 6) = 0x664b,
+ RF_CHANPAIR( 7, 8) = 0x644b,
+ RF_CHANPAIR( 9, 10) = 0x6673,
+ RF_CHANPAIR(11, 12) = 0x6473,
+ RF_CHANPAIR(13, 14) = 0x6653,
+ },
+ { /* table 11 */
+ RF_CHANPAIR( 1, 2) = 0x665b,
+ RF_CHANPAIR( 3, 4) = 0x605b,
+ RF_CHANPAIR( 5, 6) = 0x666b,
+ RF_CHANPAIR( 7, 8) = 0x646b,
+ RF_CHANPAIR( 9, 10) = 0x664b,
+ RF_CHANPAIR(11, 12) = 0x644b,
+ RF_CHANPAIR(13, 14) = 0x6673,
+ },
+
+};
+
+/* The per-channel synth values for autocal. These get written to register 1. */
+static const u16 uw2453_autocal_synth[] = {
+ RF_CHANNEL( 1) = 0x6847,
+ RF_CHANNEL( 2) = 0x6847,
+ RF_CHANNEL( 3) = 0x6867,
+ RF_CHANNEL( 4) = 0x6867,
+ RF_CHANNEL( 5) = 0x6867,
+ RF_CHANNEL( 6) = 0x6867,
+ RF_CHANNEL( 7) = 0x6857,
+ RF_CHANNEL( 8) = 0x6857,
+ RF_CHANNEL( 9) = 0x6857,
+ RF_CHANNEL(10) = 0x6857,
+ RF_CHANNEL(11) = 0x6877,
+ RF_CHANNEL(12) = 0x6877,
+ RF_CHANNEL(13) = 0x6877,
+ RF_CHANNEL(14) = 0x684f,
+};
+
+/* The VCO configuration for autocal (all channels) */
+static const u16 UW2453_AUTOCAL_VCO_CFG = 0x6662;
+
+/* TX gain settings. The array index corresponds to the TX power integration
+ * values found in the EEPROM. The values get written to register 7. */
+static u32 uw2453_txgain[] = {
+ [0x00] = 0x0e313,
+ [0x01] = 0x0fb13,
+ [0x02] = 0x0e093,
+ [0x03] = 0x0f893,
+ [0x04] = 0x0ea93,
+ [0x05] = 0x1f093,
+ [0x06] = 0x1f493,
+ [0x07] = 0x1f693,
+ [0x08] = 0x1f393,
+ [0x09] = 0x1f35b,
+ [0x0a] = 0x1e6db,
+ [0x0b] = 0x1ff3f,
+ [0x0c] = 0x1ffff,
+ [0x0d] = 0x361d7,
+ [0x0e] = 0x37fbf,
+ [0x0f] = 0x3ff8b,
+ [0x10] = 0x3ff33,
+ [0x11] = 0x3fb3f,
+ [0x12] = 0x3ffff,
+};
+
+/* RF-specific structure */
+struct uw2453_priv {
+ /* index into synth/VCO config tables where PLL lock was found
+ * -1 means autocal */
+ int config;
+};
+
+#define UW2453_PRIV(rf) ((struct uw2453_priv *) (rf)->priv)
+
+static int uw2453_synth_set_channel(struct zd_chip *chip, int channel,
+ bool autocal)
+{
+ int r;
+ int idx = channel - 1;
+ u32 val;
+
+ if (autocal)
+ val = UW2453_REGWRITE(1, uw2453_autocal_synth[idx]);
+ else
+ val = UW2453_REGWRITE(1, uw2453_std_synth[idx]);
+
+ r = zd_rfwrite_locked(chip, val, RF_RV_BITS);
+ if (r)
+ return r;
+
+ return zd_rfwrite_locked(chip,
+ UW2453_REGWRITE(2, uw2453_synth_divide[idx]), RF_RV_BITS);
+}
+
+static int uw2453_write_vco_cfg(struct zd_chip *chip, u16 value)
+{
+ /* vendor driver always sets these upper bits even though the specs say
+ * they are reserved */
+ u32 val = 0x40000 | value;
+ return zd_rfwrite_locked(chip, UW2453_REGWRITE(3, val), RF_RV_BITS);
+}
+
+static int uw2453_init_mode(struct zd_chip *chip)
+{
+ static const u32 rv[] = {
+ UW2453_REGWRITE(0, 0x25f98), /* enter IDLE mode */
+ UW2453_REGWRITE(0, 0x25f9a), /* enter CAL_VCO mode */
+ UW2453_REGWRITE(0, 0x25f94), /* enter RX/TX mode */
+ UW2453_REGWRITE(0, 0x27fd4), /* power down RSSI circuit */
+ };
+
+ return zd_rfwritev_locked(chip, rv, ARRAY_SIZE(rv), RF_RV_BITS);
+}
+
+static int uw2453_set_tx_gain_level(struct zd_chip *chip, int channel)
+{
+ u8 int_value = chip->pwr_int_values[channel - 1];
+
+ if (int_value >= ARRAY_SIZE(uw2453_txgain)) {
+ dev_dbg_f(zd_chip_dev(chip), "can't configure TX gain for "
+ "int value %x on channel %d\n", int_value, channel);
+ return 0;
+ }
+
+ return zd_rfwrite_locked(chip,
+ UW2453_REGWRITE(7, uw2453_txgain[int_value]), RF_RV_BITS);
+}
+
+static int uw2453_init_hw(struct zd_rf *rf)
+{
+ int i, r;
+ int found_config = -1;
+ u16 intr_status;
+ struct zd_chip *chip = zd_rf_to_chip(rf);
+
+ static const struct zd_ioreq16 ioreqs[] = {
+ { CR10, 0x89 }, { CR15, 0x20 },
+ { CR17, 0x28 }, /* 6112 no change */
+ { CR23, 0x38 }, { CR24, 0x20 }, { CR26, 0x93 },
+ { CR27, 0x15 }, { CR28, 0x3e }, { CR29, 0x00 },
+ { CR33, 0x28 }, { CR34, 0x30 },
+ { CR35, 0x43 }, /* 6112 3e->43 */
+ { CR41, 0x24 }, { CR44, 0x32 },
+ { CR46, 0x92 }, /* 6112 96->92 */
+ { CR47, 0x1e },
+ { CR48, 0x04 }, /* 5602 Roger */
+ { CR49, 0xfa }, { CR79, 0x58 }, { CR80, 0x30 },
+ { CR81, 0x30 }, { CR87, 0x0a }, { CR89, 0x04 },
+ { CR91, 0x00 }, { CR92, 0x0a }, { CR98, 0x8d },
+ { CR99, 0x28 }, { CR100, 0x02 },
+ { CR101, 0x09 }, /* 6112 13->1f 6220 1f->13 6407 13->9 */
+ { CR102, 0x27 },
+ { CR106, 0x1c }, /* 5d07 5112 1f->1c 6220 1c->1f 6221 1f->1c */
+ { CR107, 0x1c }, /* 6220 1c->1a 5221 1a->1c */
+ { CR109, 0x13 },
+ { CR110, 0x1f }, /* 6112 13->1f 6221 1f->13 6407 13->0x09 */
+ { CR111, 0x13 }, { CR112, 0x1f }, { CR113, 0x27 },
+ { CR114, 0x23 }, /* 6221 27->23 */
+ { CR115, 0x24 }, /* 6112 24->1c 6220 1c->24 */
+ { CR116, 0x24 }, /* 6220 1c->24 */
+ { CR117, 0xfa }, /* 6112 fa->f8 6220 f8->f4 6220 f4->fa */
+ { CR118, 0xf0 }, /* 5d07 6112 f0->f2 6220 f2->f0 */
+ { CR119, 0x1a }, /* 6112 1a->10 6220 10->14 6220 14->1a */
+ { CR120, 0x4f },
+ { CR121, 0x1f }, /* 6220 4f->1f */
+ { CR122, 0xf0 }, { CR123, 0x57 }, { CR125, 0xad },
+ { CR126, 0x6c }, { CR127, 0x03 },
+ { CR128, 0x14 }, /* 6302 12->11 */
+ { CR129, 0x12 }, /* 6301 10->0f */
+ { CR130, 0x10 }, { CR137, 0x50 }, { CR138, 0xa8 },
+ { CR144, 0xac }, { CR146, 0x20 }, { CR252, 0xff },
+ { CR253, 0xff },
+ };
+
+ static const u32 rv[] = {
+ UW2453_REGWRITE(4, 0x2b), /* configure reciever gain */
+ UW2453_REGWRITE(5, 0x19e4f), /* configure transmitter gain */
+ UW2453_REGWRITE(6, 0xf81ad), /* enable RX/TX filter tuning */
+ UW2453_REGWRITE(7, 0x3fffe), /* disable TX gain in test mode */
+
+ /* enter CAL_FIL mode, TX gain set by registers, RX gain set by pins,
+ * RSSI circuit powered down, reduced RSSI range */
+ UW2453_REGWRITE(0, 0x25f9c), /* 5d01 cal_fil */
+
+ /* synthesizer configuration for channel 1 */
+ UW2453_REGWRITE(1, 0x47),
+ UW2453_REGWRITE(2, 0x999),
+
+ /* disable manual VCO band selection */
+ UW2453_REGWRITE(3, 0x7602),
+
+ /* enable manual VCO band selection, configure current level */
+ UW2453_REGWRITE(3, 0x46063),
+ };
+
+ r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
+ if (r)
+ return r;
+
+ r = zd_rfwritev_locked(chip, rv, ARRAY_SIZE(rv), RF_RV_BITS);
+ if (r)
+ return r;
+
+ r = uw2453_init_mode(chip);
+ if (r)
+ return r;
+
+ /* Try all standard VCO configuration settings on channel 1 */
+ for (i = 0; i < ARRAY_SIZE(uw2453_std_vco_cfg) - 1; i++) {
+ /* Configure synthesizer for channel 1 */
+ r = uw2453_synth_set_channel(chip, 1, false);
+ if (r)
+ return r;
+
+ /* Write VCO config */
+ r = uw2453_write_vco_cfg(chip, uw2453_std_vco_cfg[i][0]);
+ if (r)
+ return r;
+
+ /* ack interrupt event */
+ r = zd_iowrite16_locked(chip, 0x0f, UW2453_INTR_REG);
+ if (r)
+ return r;
+
+ /* check interrupt status */
+ r = zd_ioread16_locked(chip, &intr_status, UW2453_INTR_REG);
+ if (r)
+ return r;
+
+ if (!intr_status & 0xf) {
+ dev_dbg_f(zd_chip_dev(chip),
+ "PLL locked on configuration %d\n", i);
+ found_config = i;
+ break;
+ }
+ }
+
+ if (found_config == -1) {
+ /* autocal */
+ dev_dbg_f(zd_chip_dev(chip),
+ "PLL did not lock, using autocal\n");
+
+ r = uw2453_synth_set_channel(chip, 1, true);
+ if (r)
+ return r;
+
+ r = uw2453_write_vco_cfg(chip, UW2453_AUTOCAL_VCO_CFG);
+ if (r)
+ return r;
+ }
+
+ /* To match the vendor driver behaviour, we use the configuration after
+ * the one that produced a lock. */
+ UW2453_PRIV(rf)->config = found_config + 1;
+
+ return zd_iowrite16_locked(chip, 0x06, CR203);
+}
+
+static int uw2453_set_channel(struct zd_rf *rf, u8 channel)
+{
+ int r;
+ u16 vco_cfg;
+ int config = UW2453_PRIV(rf)->config;
+ bool autocal = (config == -1);
+ struct zd_chip *chip = zd_rf_to_chip(rf);
+
+ static const struct zd_ioreq16 ioreqs[] = {
+ { CR80, 0x30 }, { CR81, 0x30 }, { CR79, 0x58 },
+ { CR12, 0xf0 }, { CR77, 0x1b }, { CR78, 0x58 },
+ };
+
+ r = uw2453_synth_set_channel(chip, channel, autocal);
+ if (r)
+ return r;
+
+ if (autocal)
+ vco_cfg = UW2453_AUTOCAL_VCO_CFG;
+ else
+ vco_cfg = uw2453_std_vco_cfg[config][CHAN_TO_PAIRIDX(channel)];
+
+ r = uw2453_write_vco_cfg(chip, vco_cfg);
+ if (r)
+ return r;
+
+ r = uw2453_init_mode(chip);
+ if (r)
+ return r;
+
+ r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
+ if (r)
+ return r;
+
+ r = uw2453_set_tx_gain_level(chip, channel);
+ if (r)
+ return r;
+
+ return zd_iowrite16_locked(chip, 0x06, CR203);
+}
+
+static int uw2453_switch_radio_on(struct zd_rf *rf)
+{
+ int r;
+ struct zd_chip *chip = zd_rf_to_chip(rf);
+ struct zd_ioreq16 ioreqs[] = {
+ { CR11, 0x00 }, { CR251, 0x3f },
+ };
+
+ /* enter RXTX mode */
+ r = zd_rfwrite_locked(chip, UW2453_REGWRITE(0, 0x25f94), RF_RV_BITS);
+ if (r)
+ return r;
+
+ if (chip->is_zd1211b)
+ ioreqs[1].value = 0x7f;
+
+ return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
+}
+
+static int uw2453_switch_radio_off(struct zd_rf *rf)
+{
+ int r;
+ struct zd_chip *chip = zd_rf_to_chip(rf);
+ static const struct zd_ioreq16 ioreqs[] = {
+ { CR11, 0x04 }, { CR251, 0x2f },
+ };
+
+ /* enter IDLE mode */
+ /* FIXME: shouldn't we go to SLEEP? sent email to zydas */
+ r = zd_rfwrite_locked(chip, UW2453_REGWRITE(0, 0x25f90), RF_RV_BITS);
+ if (r)
+ return r;
+
+ return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
+}
+
+static void uw2453_clear(struct zd_rf *rf)
+{
+ kfree(rf->priv);
+}
+
+int zd_rf_init_uw2453(struct zd_rf *rf)
+{
+ rf->init_hw = uw2453_init_hw;
+ rf->set_channel = uw2453_set_channel;
+ rf->switch_radio_on = uw2453_switch_radio_on;
+ rf->switch_radio_off = uw2453_switch_radio_off;
+ rf->patch_6m_band_edge = zd_rf_generic_patch_6m;
+ rf->clear = uw2453_clear;
+ /* we have our own TX integration code */
+ rf->update_channel_int = 0;
+
+ rf->priv = kmalloc(sizeof(struct uw2453_priv), GFP_KERNEL);
+ if (rf->priv == NULL)
+ return -ENOMEM;
+
+ return 0;
+}
+
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index 8459549d0ce..740a2194fdd 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -54,6 +54,7 @@ static struct usb_device_id usb_ids[] = {
{ USB_DEVICE(0x0586, 0x3401), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x14ea, 0xab13), .driver_info = DEVICE_ZD1211 },
{ USB_DEVICE(0x13b1, 0x001e), .driver_info = DEVICE_ZD1211 },
+ { USB_DEVICE(0x0586, 0x3407), .driver_info = DEVICE_ZD1211 },
/* ZD1211B */
{ USB_DEVICE(0x0ace, 0x1215), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B },