aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/cs89x0.c12
-rw-r--r--drivers/net/cs89x0.h1
-rw-r--r--drivers/net/hamradio/6pack.c20
-rw-r--r--drivers/net/hamradio/Kconfig2
-rw-r--r--drivers/net/sk98lin/skge.c80
-rw-r--r--drivers/net/sk98lin/skgeinit.c2
-rw-r--r--drivers/net/sk98lin/skxmac2.c8
-rw-r--r--drivers/net/skge.c233
-rw-r--r--drivers/net/skge.h41
-rw-r--r--drivers/net/smc91x.h2
-rw-r--r--drivers/net/tg3.c16
11 files changed, 231 insertions, 186 deletions
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index 2c6dc24c372..b780307093e 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -417,6 +417,7 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
struct net_local *lp = netdev_priv(dev);
static unsigned version_printed;
int i;
+ int tmp;
unsigned rev_type = 0;
int eeprom_buff[CHKSUM_LEN];
int retval;
@@ -492,14 +493,17 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
goto out2;
}
}
-printk("PP_addr=0x%x\n", inw(ioaddr + ADD_PORT));
+ printk(KERN_DEBUG "PP_addr at %x: 0x%x\n",
+ ioaddr + ADD_PORT, inw(ioaddr + ADD_PORT));
ioaddr &= ~3;
outw(PP_ChipID, ioaddr + ADD_PORT);
- if (inw(ioaddr + DATA_PORT) != CHIP_EISA_ID_SIG) {
- printk(KERN_ERR "%s: incorrect signature 0x%x\n",
- dev->name, inw(ioaddr + DATA_PORT));
+ tmp = inw(ioaddr + DATA_PORT);
+ if (tmp != CHIP_EISA_ID_SIG) {
+ printk(KERN_DEBUG "%s: incorrect signature at %x: 0x%x!="
+ CHIP_EISA_ID_SIG_STR "\n",
+ dev->name, ioaddr + DATA_PORT, tmp);
retval = -ENODEV;
goto out2;
}
diff --git a/drivers/net/cs89x0.h b/drivers/net/cs89x0.h
index bd3ad8e6cce..decea264f12 100644
--- a/drivers/net/cs89x0.h
+++ b/drivers/net/cs89x0.h
@@ -93,6 +93,7 @@
#endif
#define CHIP_EISA_ID_SIG 0x630E /* Product ID Code for Crystal Chip (CS8900 spec 4.3) */
+#define CHIP_EISA_ID_SIG_STR "0x630E"
#ifdef IBMEIPKT
#define EISA_ID_SIG 0x4D24 /* IBM */
diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
index e44f8e9055e..f9e3be96963 100644
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -130,12 +130,11 @@ struct sixpack {
#define AX25_6PACK_HEADER_LEN 0
-static void sp_start_tx_timer(struct sixpack *);
static void sixpack_decode(struct sixpack *, unsigned char[], int);
static int encode_sixpack(unsigned char *, unsigned char *, int, unsigned char);
/*
- * perform the persistence/slottime algorithm for CSMA access. If the
+ * Perform the persistence/slottime algorithm for CSMA access. If the
* persistence check was successful, write the data to the serial driver.
* Note that in case of DAMA operation, the data is not sent here.
*/
@@ -143,7 +142,7 @@ static int encode_sixpack(unsigned char *, unsigned char *, int, unsigned char);
static void sp_xmit_on_air(unsigned long channel)
{
struct sixpack *sp = (struct sixpack *) channel;
- int actual;
+ int actual, when = sp->slottime;
static unsigned char random;
random = random * 17 + 41;
@@ -159,20 +158,10 @@ static void sp_xmit_on_air(unsigned long channel)
sp->tty->driver->write(sp->tty, &sp->led_state, 1);
sp->status2 = 0;
} else
- sp_start_tx_timer(sp);
+ mod_timer(&sp->tx_t, jiffies + ((when + 1) * HZ) / 100);
}
/* ----> 6pack timer interrupt handler and friends. <---- */
-static void sp_start_tx_timer(struct sixpack *sp)
-{
- int when = sp->slottime;
-
- del_timer(&sp->tx_t);
- sp->tx_t.data = (unsigned long) sp;
- sp->tx_t.function = sp_xmit_on_air;
- sp->tx_t.expires = jiffies + ((when + 1) * HZ) / 100;
- add_timer(&sp->tx_t);
-}
/* Encapsulate one AX.25 frame and stuff into a TTY queue. */
static void sp_encaps(struct sixpack *sp, unsigned char *icp, int len)
@@ -243,8 +232,7 @@ static void sp_encaps(struct sixpack *sp, unsigned char *icp, int len)
sp->xleft = count;
sp->xhead = sp->xbuff;
sp->status2 = count;
- if (sp->duplex == 0)
- sp_start_tx_timer(sp);
+ sp_xmit_on_air((unsigned long)sp);
}
return;
diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
index 7cdebe1a0b6..0cd54306e63 100644
--- a/drivers/net/hamradio/Kconfig
+++ b/drivers/net/hamradio/Kconfig
@@ -17,7 +17,7 @@ config MKISS
config 6PACK
tristate "Serial port 6PACK driver"
- depends on AX25 && BROKEN_ON_SMP
+ depends on AX25
---help---
6pack is a transmission protocol for the data exchange between your
PC and your TNC (the Terminal Node Controller acts as a kind of
diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c
index 82570ec44d8..6ee4771addf 100644
--- a/drivers/net/sk98lin/skge.c
+++ b/drivers/net/sk98lin/skge.c
@@ -5133,6 +5133,84 @@ static void __devexit skge_remove_one(struct pci_dev *pdev)
kfree(pAC);
}
+#ifdef CONFIG_PM
+static int skge_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ DEV_NET *pNet = netdev_priv(dev);
+ SK_AC *pAC = pNet->pAC;
+ struct net_device *otherdev = pAC->dev[1];
+
+ if (netif_running(dev)) {
+ netif_carrier_off(dev);
+ DoPrintInterfaceChange = SK_FALSE;
+ SkDrvDeInitAdapter(pAC, 0); /* performs SkGeClose */
+ netif_device_detach(dev);
+ }
+ if (otherdev != dev) {
+ if (netif_running(otherdev)) {
+ netif_carrier_off(otherdev);
+ DoPrintInterfaceChange = SK_FALSE;
+ SkDrvDeInitAdapter(pAC, 1); /* performs SkGeClose */
+ netif_device_detach(otherdev);
+ }
+ }
+
+ pci_save_state(pdev);
+ pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
+ if (pAC->AllocFlag & SK_ALLOC_IRQ) {
+ free_irq(dev->irq, dev);
+ }
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+ return 0;
+}
+
+static int skge_resume(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ DEV_NET *pNet = netdev_priv(dev);
+ SK_AC *pAC = pNet->pAC;
+ struct net_device *otherdev = pAC->dev[1];
+ int ret;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ pci_enable_device(pdev);
+ pci_set_master(pdev);
+ if (pAC->GIni.GIMacsFound == 2)
+ ret = request_irq(dev->irq, SkGeIsr, SA_SHIRQ, pAC->Name, dev);
+ else
+ ret = request_irq(dev->irq, SkGeIsrOnePort, SA_SHIRQ, pAC->Name, dev);
+ if (ret) {
+ printk(KERN_WARNING "sk98lin: unable to acquire IRQ %d\n", dev->irq);
+ pAC->AllocFlag &= ~SK_ALLOC_IRQ;
+ dev->irq = 0;
+ pci_disable_device(pdev);
+ return -EBUSY;
+ }
+
+ netif_device_attach(dev);
+ if (netif_running(dev)) {
+ DoPrintInterfaceChange = SK_FALSE;
+ SkDrvInitAdapter(pAC, 0); /* first device */
+ }
+ if (otherdev != dev) {
+ netif_device_attach(otherdev);
+ if (netif_running(otherdev)) {
+ DoPrintInterfaceChange = SK_FALSE;
+ SkDrvInitAdapter(pAC, 1); /* second device */
+ }
+ }
+
+ return 0;
+}
+#else
+#define skge_suspend NULL
+#define skge_resume NULL
+#endif
+
static struct pci_device_id skge_pci_tbl[] = {
{ PCI_VENDOR_ID_3COM, 0x1700, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ PCI_VENDOR_ID_3COM, 0x80eb, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
@@ -5158,6 +5236,8 @@ static struct pci_driver skge_driver = {
.id_table = skge_pci_tbl,
.probe = skge_probe_one,
.remove = __devexit_p(skge_remove_one),
+ .suspend = skge_suspend,
+ .resume = skge_resume,
};
static int __init skge_init(void)
diff --git a/drivers/net/sk98lin/skgeinit.c b/drivers/net/sk98lin/skgeinit.c
index df4483429a7..6cb49dd0225 100644
--- a/drivers/net/sk98lin/skgeinit.c
+++ b/drivers/net/sk98lin/skgeinit.c
@@ -2016,7 +2016,7 @@ SK_IOC IoC) /* IO context */
* we set the PHY to coma mode and switch to D3 power state.
*/
if (pAC->GIni.GIYukonLite &&
- pAC->GIni.GIChipRev == CHIP_REV_YU_LITE_A3) {
+ pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
/* for all ports switch PHY to coma mode */
for (i = 0; i < pAC->GIni.GIMacsFound; i++) {
diff --git a/drivers/net/sk98lin/skxmac2.c b/drivers/net/sk98lin/skxmac2.c
index 94a09deecb3..42d2d963150 100644
--- a/drivers/net/sk98lin/skxmac2.c
+++ b/drivers/net/sk98lin/skxmac2.c
@@ -1065,7 +1065,7 @@ int Port) /* Port Index (MAC_1 + n) */
/* WA code for COMA mode */
if (pAC->GIni.GIYukonLite &&
- pAC->GIni.GIChipRev == CHIP_REV_YU_LITE_A3) {
+ pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
SK_IN32(IoC, B2_GP_IO, &DWord);
@@ -1110,7 +1110,7 @@ int Port) /* Port Index (MAC_1 + n) */
/* WA code for COMA mode */
if (pAC->GIni.GIYukonLite &&
- pAC->GIni.GIChipRev == CHIP_REV_YU_LITE_A3) {
+ pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
SK_IN32(IoC, B2_GP_IO, &DWord);
@@ -2126,7 +2126,7 @@ SK_U8 Mode) /* low power mode */
int Ret = 0;
if (pAC->GIni.GIYukonLite &&
- pAC->GIni.GIChipRev == CHIP_REV_YU_LITE_A3) {
+ pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
/* save current power mode */
LastMode = pAC->GIni.GP[Port].PPhyPowerState;
@@ -2253,7 +2253,7 @@ int Port) /* Port Index (e.g. MAC_1) */
int Ret = 0;
if (pAC->GIni.GIYukonLite &&
- pAC->GIni.GIChipRev == CHIP_REV_YU_LITE_A3) {
+ pAC->GIni.GIChipRev >= CHIP_REV_YU_LITE_A3) {
/* save current power mode */
LastMode = pAC->GIni.GP[Port].PPhyPowerState;
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 5cacc7ad9e7..f15739481d6 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -42,7 +42,7 @@
#include "skge.h"
#define DRV_NAME "skge"
-#define DRV_VERSION "0.7"
+#define DRV_VERSION "0.8"
#define PFX DRV_NAME " "
#define DEFAULT_TX_RING_SIZE 128
@@ -55,7 +55,7 @@
#define ETH_JUMBO_MTU 9000
#define TX_WATCHDOG (5 * HZ)
#define NAPI_WEIGHT 64
-#define BLINK_HZ (HZ/4)
+#define BLINK_MS 250
MODULE_DESCRIPTION("SysKonnect Gigabit Ethernet driver");
MODULE_AUTHOR("Stephen Hemminger <shemminger@osdl.org>");
@@ -75,7 +75,6 @@ static const struct pci_device_id skge_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C940B) },
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_GE) },
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_YU) },
- { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */
{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_DGE510T), },
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4320) },
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5005) }, /* Belkin */
@@ -249,7 +248,7 @@ static int skge_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
} else {
u32 setting;
- switch(ecmd->speed) {
+ switch (ecmd->speed) {
case SPEED_1000:
if (ecmd->duplex == DUPLEX_FULL)
setting = SUPPORTED_1000baseT_Full;
@@ -620,84 +619,98 @@ static int skge_set_coalesce(struct net_device *dev,
return 0;
}
-static void skge_led_on(struct skge_hw *hw, int port)
+enum led_mode { LED_MODE_OFF, LED_MODE_ON, LED_MODE_TST };
+static void skge_led(struct skge_port *skge, enum led_mode mode)
{
+ struct skge_hw *hw = skge->hw;
+ int port = skge->port;
+
+ spin_lock_bh(&hw->phy_lock);
if (hw->chip_id == CHIP_ID_GENESIS) {
- skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON);
- skge_write8(hw, B0_LED, LED_STAT_ON);
+ switch (mode) {
+ case LED_MODE_OFF:
+ xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_OFF);
+ skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
+ skge_write32(hw, SK_REG(port, RX_LED_VAL), 0);
+ skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_T_OFF);
+ break;
- skge_write8(hw, SK_REG(port, RX_LED_TST), LED_T_ON);
- skge_write32(hw, SK_REG(port, RX_LED_VAL), 100);
- skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START);
+ case LED_MODE_ON:
+ skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON);
+ skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_LINKSYNC_ON);
- /* For Broadcom Phy only */
- xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_ON);
- } else {
- gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
- gm_phy_write(hw, port, PHY_MARV_LED_OVER,
- PHY_M_LED_MO_DUP(MO_LED_ON) |
- PHY_M_LED_MO_10(MO_LED_ON) |
- PHY_M_LED_MO_100(MO_LED_ON) |
- PHY_M_LED_MO_1000(MO_LED_ON) |
- PHY_M_LED_MO_RX(MO_LED_ON));
- }
-}
+ skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START);
+ skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_START);
-static void skge_led_off(struct skge_hw *hw, int port)
-{
- if (hw->chip_id == CHIP_ID_GENESIS) {
- skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
- skge_write8(hw, B0_LED, LED_STAT_OFF);
+ break;
- skge_write32(hw, SK_REG(port, RX_LED_VAL), 0);
- skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_T_OFF);
+ case LED_MODE_TST:
+ skge_write8(hw, SK_REG(port, RX_LED_TST), LED_T_ON);
+ skge_write32(hw, SK_REG(port, RX_LED_VAL), 100);
+ skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START);
- /* Broadcom only */
- xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_OFF);
+ xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_ON);
+ break;
+ }
} else {
- gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
- gm_phy_write(hw, port, PHY_MARV_LED_OVER,
- PHY_M_LED_MO_DUP(MO_LED_OFF) |
- PHY_M_LED_MO_10(MO_LED_OFF) |
- PHY_M_LED_MO_100(MO_LED_OFF) |
- PHY_M_LED_MO_1000(MO_LED_OFF) |
- PHY_M_LED_MO_RX(MO_LED_OFF));
+ switch (mode) {
+ case LED_MODE_OFF:
+ gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
+ gm_phy_write(hw, port, PHY_MARV_LED_OVER,
+ PHY_M_LED_MO_DUP(MO_LED_OFF) |
+ PHY_M_LED_MO_10(MO_LED_OFF) |
+ PHY_M_LED_MO_100(MO_LED_OFF) |
+ PHY_M_LED_MO_1000(MO_LED_OFF) |
+ PHY_M_LED_MO_RX(MO_LED_OFF));
+ break;
+ case LED_MODE_ON:
+ gm_phy_write(hw, port, PHY_MARV_LED_CTRL,
+ PHY_M_LED_PULS_DUR(PULS_170MS) |
+ PHY_M_LED_BLINK_RT(BLINK_84MS) |
+ PHY_M_LEDC_TX_CTRL |
+ PHY_M_LEDC_DP_CTRL);
+
+ gm_phy_write(hw, port, PHY_MARV_LED_OVER,
+ PHY_M_LED_MO_RX(MO_LED_OFF) |
+ (skge->speed == SPEED_100 ?
+ PHY_M_LED_MO_100(MO_LED_ON) : 0));
+ break;
+ case LED_MODE_TST:
+ gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
+ gm_phy_write(hw, port, PHY_MARV_LED_OVER,
+ PHY_M_LED_MO_DUP(MO_LED_ON) |
+ PHY_M_LED_MO_10(MO_LED_ON) |
+ PHY_M_LED_MO_100(MO_LED_ON) |
+ PHY_M_LED_MO_1000(MO_LED_ON) |
+ PHY_M_LED_MO_RX(MO_LED_ON));
+ }
}
-}
-
-static void skge_blink_timer(unsigned long data)
-{
- struct skge_port *skge = (struct skge_port *) data;
- struct skge_hw *hw = skge->hw;
- unsigned long flags;
-
- spin_lock_irqsave(&hw->phy_lock, flags);
- if (skge->blink_on)
- skge_led_on(hw, skge->port);
- else
- skge_led_off(hw, skge->port);
- spin_unlock_irqrestore(&hw->phy_lock, flags);
-
- skge->blink_on = !skge->blink_on;
- mod_timer(&skge->led_blink, jiffies + BLINK_HZ);
+ spin_unlock_bh(&hw->phy_lock);
}
/* blink LED's for finding board */
static int skge_phys_id(struct net_device *dev, u32 data)
{
struct skge_port *skge = netdev_priv(dev);
+ unsigned long ms;
+ enum led_mode mode = LED_MODE_TST;
if (!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))
- data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ);
+ ms = jiffies_to_msecs(MAX_SCHEDULE_TIMEOUT / HZ) * 1000;
+ else
+ ms = data * 1000;
- /* start blinking */
- skge->blink_on = 1;
- mod_timer(&skge->led_blink, jiffies+1);
+ while (ms > 0) {
+ skge_led(skge, mode);
+ mode ^= LED_MODE_TST;
- msleep_interruptible(data * 1000);
- del_timer_sync(&skge->led_blink);
+ if (msleep_interruptible(BLINK_MS))
+ break;
+ ms -= BLINK_MS;
+ }
- skge_led_off(skge->hw, skge->port);
+ /* back to regular LED state */
+ skge_led(skge, netif_running(dev) ? LED_MODE_ON : LED_MODE_OFF);
return 0;
}
@@ -1028,7 +1041,7 @@ static void bcom_check_link(struct skge_hw *hw, int port)
}
/* Check Duplex mismatch */
- switch(aux & PHY_B_AS_AN_RES_MSK) {
+ switch (aux & PHY_B_AS_AN_RES_MSK) {
case PHY_B_RES_1000FD:
skge->duplex = DUPLEX_FULL;
break;
@@ -1099,7 +1112,7 @@ static void bcom_phy_init(struct skge_port *skge, int jumbo)
r |= XM_MMU_NO_PRE;
xm_write16(hw, port, XM_MMU_CMD,r);
- switch(id1) {
+ switch (id1) {
case PHY_BCOM_ID1_C0:
/*
* Workaround BCOM Errata for the C0 type.
@@ -1194,13 +1207,6 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
xm_write16(hw, port, XM_STAT_CMD,
XM_SC_CLR_RXC | XM_SC_CLR_TXC);
- /* initialize Rx, Tx and Link LED */
- skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON);
- skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_LINKSYNC_ON);
-
- skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START);
- skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_START);
-
/* Unreset the XMAC. */
skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_CLR_MAC_RST);
@@ -1209,7 +1215,6 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
* namely for the 1000baseTX cards that use the XMAC's
* GMII mode.
*/
- spin_lock_bh(&hw->phy_lock);
/* Take external Phy out of reset */
r = skge_read32(hw, B2_GP_IO);
if (port == 0)
@@ -1219,7 +1224,6 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
skge_write32(hw, B2_GP_IO, r);
skge_read32(hw, B2_GP_IO);
- spin_unlock_bh(&hw->phy_lock);
/* Enable GMII interfac */
xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD);
@@ -1569,7 +1573,6 @@ static void yukon_init(struct skge_hw *hw, int port)
{
struct skge_port *skge = netdev_priv(hw->dev[port]);
u16 ctrl, ct1000, adv;
- u16 ledctrl, ledover;
pr_debug("yukon_init\n");
if (skge->autoneg == AUTONEG_ENABLE) {
@@ -1641,32 +1644,11 @@ static void yukon_init(struct skge_hw *hw, int port)
gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv);
gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl);
- /* Setup Phy LED's */
- ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS);
- ledover = 0;
-
- ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL;
-
- /* turn off the Rx LED (LED_RX) */
- ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
-
- /* disable blink mode (LED_DUPLEX) on collisions */
- ctrl |= PHY_M_LEDC_DP_CTRL;
- gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
-
- if (skge->autoneg == AUTONEG_DISABLE || skge->speed == SPEED_100) {
- /* turn on 100 Mbps LED (LED_LINK100) */
- ledover |= PHY_M_LED_MO_100(MO_LED_ON);
- }
-
- if (ledover)
- gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover);
-
/* Enable phy interrupt on autonegotiation complete (or link up) */
if (skge->autoneg == AUTONEG_ENABLE)
- gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
+ gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_MSK);
else
- gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
+ gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_DEF_MSK);
}
static void yukon_reset(struct skge_hw *hw, int port)
@@ -1691,7 +1673,7 @@ static void yukon_mac_init(struct skge_hw *hw, int port)
/* WA code for COMA mode -- set PHY reset */
if (hw->chip_id == CHIP_ID_YUKON_LITE &&
- hw->chip_rev == CHIP_REV_YU_LITE_A3)
+ hw->chip_rev >= CHIP_REV_YU_LITE_A3)
skge_write32(hw, B2_GP_IO,
(skge_read32(hw, B2_GP_IO) | GP_DIR_9 | GP_IO_9));
@@ -1701,7 +1683,7 @@ static void yukon_mac_init(struct skge_hw *hw, int port)
/* WA code for COMA mode -- clear PHY reset */
if (hw->chip_id == CHIP_ID_YUKON_LITE &&
- hw->chip_rev == CHIP_REV_YU_LITE_A3)
+ hw->chip_rev >= CHIP_REV_YU_LITE_A3)
skge_write32(hw, B2_GP_IO,
(skge_read32(hw, B2_GP_IO) | GP_DIR_9)
& ~GP_IO_9);
@@ -1745,9 +1727,7 @@ static void yukon_mac_init(struct skge_hw *hw, int port)
gma_write16(hw, port, GM_GP_CTRL, reg);
skge_read16(hw, GMAC_IRQ_SRC);
- spin_lock_bh(&hw->phy_lock);
yukon_init(hw, port);
- spin_unlock_bh(&hw->phy_lock);
/* MIB clear */
reg = gma_read16(hw, port, GM_PHY_ADDR);
@@ -1796,7 +1776,7 @@ static void yukon_mac_init(struct skge_hw *hw, int port)
skge_write16(hw, SK_REG(port, RX_GMF_FL_MSK), RX_FF_FL_DEF_MSK);
reg = GMF_OPER_ON | GMF_RX_F_FL_ON;
if (hw->chip_id == CHIP_ID_YUKON_LITE &&
- hw->chip_rev == CHIP_REV_YU_LITE_A3)
+ hw->chip_rev >= CHIP_REV_YU_LITE_A3)
reg &= ~GMF_RX_F_FL_ON;
skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
skge_write16(hw, SK_REG(port, RX_GMF_CTRL_T), reg);
@@ -1813,19 +1793,19 @@ static void yukon_stop(struct skge_port *skge)
int port = skge->port;
if (hw->chip_id == CHIP_ID_YUKON_LITE &&
- hw->chip_rev == CHIP_REV_YU_LITE_A3) {
+ hw->chip_rev >= CHIP_REV_YU_LITE_A3) {
skge_write32(hw, B2_GP_IO,
skge_read32(hw, B2_GP_IO) | GP_DIR_9 | GP_IO_9);
}
gma_write16(hw, port, GM_GP_CTRL,
gma_read16(hw, port, GM_GP_CTRL)
- & ~(GM_GPCR_RX_ENA|GM_GPCR_RX_ENA));
+ & ~(GM_GPCR_TX_ENA|GM_GPCR_RX_ENA));
gma_read16(hw, port, GM_GP_CTRL);
/* set GPHY Control reset */
- gma_write32(hw, port, GPHY_CTRL, GPC_RST_SET);
- gma_write32(hw, port, GMAC_CTRL, GMC_RST_SET);
+ skge_write32(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET);
+ skge_write32(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET);
}
static void yukon_get_stats(struct skge_port *skge, u64 *data)
@@ -1856,11 +1836,12 @@ static void yukon_mac_intr(struct skge_hw *hw, int port)
if (status & GM_IS_RX_FF_OR) {
++skge->net_stats.rx_fifo_errors;
- gma_write8(hw, port, RX_GMF_CTRL_T, GMF_CLI_RX_FO);
+ skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_CLI_RX_FO);
}
+
if (status & GM_IS_TX_FF_UR) {
++skge->net_stats.tx_fifo_errors;
- gma_write8(hw, port, TX_GMF_CTRL_T, GMF_CLI_TX_FU);
+ skge_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_FU);
}
}
@@ -1896,7 +1877,7 @@ static void yukon_link_up(struct skge_port *skge)
reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA;
gma_write16(hw, port, GM_GP_CTRL, reg);
- gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
+ gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_DEF_MSK);
skge_link_up(skge);
}
@@ -1904,12 +1885,14 @@ static void yukon_link_down(struct skge_port *skge)
{
struct skge_hw *hw = skge->hw;
int port = skge->port;
+ u16 ctrl;
pr_debug("yukon_link_down\n");
gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);
- gm_phy_write(hw, port, GM_GP_CTRL,
- gm_phy_read(hw, port, GM_GP_CTRL)
- & ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA));
+
+ ctrl = gma_read16(hw, port, GM_GP_CTRL);
+ ctrl &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA);
+ gma_write16(hw, port, GM_GP_CTRL, ctrl);
if (skge->flow_control == FLOW_MODE_REM_SEND) {
/* restore Asymmetric Pause bit */
@@ -2097,10 +2080,12 @@ static int skge_up(struct net_device *dev)
skge_write32(hw, B0_IMSK, hw->intr_mask);
/* Initialze MAC */
+ spin_lock_bh(&hw->phy_lock);
if (hw->chip_id == CHIP_ID_GENESIS)
genesis_mac_init(hw, port);
else
yukon_mac_init(hw, port);
+ spin_unlock_bh(&hw->phy_lock);
/* Configure RAMbuffers */
chunk = hw->ram_size / ((hw->ports + 1)*2);
@@ -2116,6 +2101,7 @@ static int skge_up(struct net_device *dev)
/* Start receiver BMU */
wmb();
skge_write8(hw, Q_ADDR(rxqaddr[port], Q_CSR), CSR_START | CSR_IRQ_CL_F);
+ skge_led(skge, LED_MODE_ON);
pr_debug("skge_up completed\n");
return 0;
@@ -2140,8 +2126,6 @@ static int skge_down(struct net_device *dev)
netif_stop_queue(dev);
- del_timer_sync(&skge->led_blink);
-
/* Stop transmitter */
skge_write8(hw, Q_ADDR(txqaddr[port], Q_CSR), CSR_STOP);
skge_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL),
@@ -2175,15 +2159,12 @@ static int skge_down(struct net_device *dev)
if (hw->chip_id == CHIP_ID_GENESIS) {
skge_write8(hw, SK_REG(port, TX_MFF_CTRL2), MFF_RST_SET);
skge_write8(hw, SK_REG(port, RX_MFF_CTRL2), MFF_RST_SET);
- skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_STOP);
- skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_STOP);
} else {
skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
skge_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET);
}
- /* turn off led's */
- skge_write16(hw, B0_LED, LED_STAT_OFF);
+ skge_led(skge, LED_MODE_OFF);
skge_tx_clean(skge);
skge_rx_clean(skge);
@@ -2633,11 +2614,17 @@ static inline void skge_tx_intr(struct net_device *dev)
spin_unlock(&skge->tx_lock);
}
+/* Parity errors seem to happen when Genesis is connected to a switch
+ * with no other ports present. Heartbeat error??
+ */
static void skge_mac_parity(struct skge_hw *hw, int port)
{
- printk(KERN_ERR PFX "%s: mac data parity error\n",
- hw->dev[port] ? hw->dev[port]->name
- : (port == 0 ? "(port A)": "(port B"));
+ struct net_device *dev = hw->dev[port];
+
+ if (dev) {
+ struct skge_port *skge = netdev_priv(dev);
+ ++skge->net_stats.tx_heartbeat_errors;
+ }
if (hw->chip_id == CHIP_ID_GENESIS)
skge_write16(hw, SK_REG(port, TX_MFF_CTRL1),
@@ -3083,10 +3070,6 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port,
spin_lock_init(&skge->tx_lock);
- init_timer(&skge->led_blink);
- skge->led_blink.function = skge_blink_timer;
- skge->led_blink.data = (unsigned long) skge;
-
if (hw->chip_id != CHIP_ID_GENESIS) {
dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
skge->rx_csum = 1;
diff --git a/drivers/net/skge.h b/drivers/net/skge.h
index fced3d2bc07..b432f1bb816 100644
--- a/drivers/net/skge.h
+++ b/drivers/net/skge.h
@@ -1449,10 +1449,12 @@ enum {
PHY_M_IS_DTE_CHANGE = 1<<2, /* DTE Power Det. Status Changed */
PHY_M_IS_POL_CHANGE = 1<<1, /* Polarity Changed */
PHY_M_IS_JABBER = 1<<0, /* Jabber */
-};
-#define PHY_M_DEF_MSK ( PHY_M_IS_AN_ERROR | PHY_M_IS_LSP_CHANGE | \
- PHY_M_IS_LST_CHANGE | PHY_M_IS_FIFO_ERROR)
+ PHY_M_IS_DEF_MSK = PHY_M_IS_AN_ERROR | PHY_M_IS_LSP_CHANGE |
+ PHY_M_IS_LST_CHANGE | PHY_M_IS_FIFO_ERROR,
+
+ PHY_M_IS_AN_MSK = PHY_M_IS_AN_ERROR | PHY_M_IS_AN_COMPL,
+};
/***** PHY_MARV_EXT_CTRL 16 bit r/w Ext. PHY Specific Ctrl *****/
enum {
@@ -1509,7 +1511,7 @@ enum {
PHY_M_LEDC_TX_C_MSB = 1<<0, /* Tx Control (MSB, 88E1111 only) */
};
-#define PHY_M_LED_PULS_DUR(x) ( ((x)<<12) & PHY_M_LEDC_PULS_MSK)
+#define PHY_M_LED_PULS_DUR(x) (((x)<<12) & PHY_M_LEDC_PULS_MSK)
enum {
PULS_NO_STR = 0,/* no pulse stretching */
@@ -1522,7 +1524,7 @@ enum {
PULS_1300MS = 7,/* 1.3 s to 2.7 s */
};
-#define PHY_M_LED_BLINK_RT(x) ( ((x)<<8) & PHY_M_LEDC_BL_R_MSK)
+#define PHY_M_LED_BLINK_RT(x) (((x)<<8) & PHY_M_LEDC_BL_R_MSK)
enum {
BLINK_42MS = 0,/* 42 ms */
@@ -1602,9 +1604,9 @@ enum {
PHY_M_FELP_LED0_MSK = 0xf, /* Bit 3.. 0: LED0 Mask (SPEED) */
};
-#define PHY_M_FELP_LED2_CTRL(x) ( ((x)<<8) & PHY_M_FELP_LED2_MSK)
-#define PHY_M_FELP_LED1_CTRL(x) ( ((x)<<4) & PHY_M_FELP_LED1_MSK)
-#define PHY_M_FELP_LED0_CTRL(x) ( ((x)<<0) & PHY_M_FELP_LED0_MSK)
+#define PHY_M_FELP_LED2_CTRL(x) (((x)<<8) & PHY_M_FELP_LED2_MSK)
+#define PHY_M_FELP_LED1_CTRL(x) (((x)<<4) & PHY_M_FELP_LED1_MSK)
+#define PHY_M_FELP_LED0_CTRL(x) (((x)<<0) & PHY_M_FELP_LED0_MSK)
enum {
LED_PAR_CTRL_COLX = 0x00,
@@ -1640,7 +1642,7 @@ enum {
PHY_M_MAC_MD_COPPER = 5,/* Copper only */
PHY_M_MAC_MD_1000BX = 7,/* 1000Base-X only */
};
-#define PHY_M_MAC_MODE_SEL(x) ( ((x)<<7) & PHY_M_MAC_MD_MSK)
+#define PHY_M_MAC_MODE_SEL(x) (((x)<<7) & PHY_M_MAC_MD_MSK)
/***** PHY_MARV_PHY_CTRL (page 3) 16 bit r/w LED Control Reg. *****/
enum {
@@ -1650,10 +1652,10 @@ enum {
PHY_M_LEDC_STA0_MSK = 0xf, /* Bit 3.. 0: STAT0 LED Ctrl. Mask */
};
-#define PHY_M_LEDC_LOS_CTRL(x) ( ((x)<<12) & PHY_M_LEDC_LOS_MSK)
-#define PHY_M_LEDC_INIT_CTRL(x) ( ((x)<<8) & PHY_M_LEDC_INIT_MSK)
-#define PHY_M_LEDC_STA1_CTRL(x) ( ((x)<<4) & PHY_M_LEDC_STA1_MSK)
-#define PHY_M_LEDC_STA0_CTRL(x) ( ((x)<<0) & PHY_M_LEDC_STA0_MSK)
+#define PHY_M_LEDC_LOS_CTRL(x) (((x)<<12) & PHY_M_LEDC_LOS_MSK)
+#define PHY_M_LEDC_INIT_CTRL(x) (((x)<<8) & PHY_M_LEDC_INIT_MSK)
+#define PHY_M_LEDC_STA1_CTRL(x) (((x)<<4) & PHY_M_LEDC_STA1_MSK)
+#define PHY_M_LEDC_STA0_CTRL(x) (((x)<<0) & PHY_M_LEDC_STA0_MSK)
/* GMAC registers */
/* Port Registers */
@@ -2505,8 +2507,6 @@ struct skge_port {
dma_addr_t dma;
unsigned long mem_size;
unsigned int rx_buf_size;
-
- struct timer_list led_blink;
};
@@ -2606,17 +2606,6 @@ static inline void gma_write16(const struct skge_hw *hw, int port, int r, u16 v)
skge_write16(hw, SK_GMAC_REG(port,r), v);
}
-static inline void gma_write32(const struct skge_hw *hw, int port, int r, u32 v)
-{
- skge_write16(hw, SK_GMAC_REG(port, r), (u16) v);
- skge_write32(hw, SK_GMAC_REG(port, r+4), (u16)(v >> 16));
-}
-
-static inline void gma_write8(const struct skge_hw *hw, int port, int r, u8 v)
-{
- skge_write8(hw, SK_GMAC_REG(port,r), v);
-}
-
static inline void gma_set_addr(struct skge_hw *hw, int port, int reg,
const u8 *addr)
{
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 7089d86e857..a9b06b8d8e3 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -188,7 +188,7 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg)
#define SMC_IRQ_TRIGGER_TYPE (( \
machine_is_omap_h2() \
|| machine_is_omap_h3() \
- || (machine_is_omap_innovator() && !cpu_is_omap150()) \
+ || (machine_is_omap_innovator() && !cpu_is_omap1510()) \
) ? IRQT_FALLING : IRQT_RISING)
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 201a550f0bc..368b8fb1402 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -66,8 +66,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.34"
-#define DRV_MODULE_RELDATE "July 25, 2005"
+#define DRV_MODULE_VERSION "3.35"
+#define DRV_MODULE_RELDATE "August 6, 2005"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -10421,6 +10421,12 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
tg3_init_coal(tp);
+ /* Now that we have fully setup the chip, save away a snapshot
+ * of the PCI config space. We need to restore this after
+ * GRC_MISC_CFG core clock resets and some resume events.
+ */
+ pci_save_state(tp->pdev);
+
err = register_netdev(dev);
if (err) {
printk(KERN_ERR PFX "Cannot register net device, "
@@ -10430,12 +10436,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
pci_set_drvdata(pdev, dev);
- /* Now that we have fully setup the chip, save away a snapshot
- * of the PCI config space. We need to restore this after
- * GRC_MISC_CFG core clock resets and some resume events.
- */
- pci_save_state(tp->pdev);
-
printk(KERN_INFO "%s: Tigon3 [partno(%s) rev %04x PHY(%s)] (PCI%s:%s:%s) %sBaseT Ethernet ",
dev->name,
tp->board_part_number,