diff options
Diffstat (limited to 'drivers/net')
104 files changed, 3621 insertions, 3148 deletions
diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c index 59c33925be6..b936373ab2a 100644 --- a/drivers/net/3c509.c +++ b/drivers/net/3c509.c @@ -225,6 +225,7 @@ static struct eisa_device_id el3_eisa_ids[] = { { "TCM5095" }, { "" } }; +MODULE_DEVICE_TABLE(eisa, el3_eisa_ids); static int el3_eisa_probe (struct device *device); diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c index af301f09d67..df42e28cc80 100644 --- a/drivers/net/3c59x.c +++ b/drivers/net/3c59x.c @@ -851,6 +851,7 @@ static struct eisa_device_id vortex_eisa_ids[] = { { "TCM5970", CH_3C597 }, { "" } }; +MODULE_DEVICE_TABLE(eisa, vortex_eisa_ids); static int vortex_eisa_probe(struct device *device); static int vortex_eisa_remove(struct device *device); diff --git a/drivers/net/8390.c b/drivers/net/8390.c index 5b6b05ed8f3..9d34056147a 100644 --- a/drivers/net/8390.c +++ b/drivers/net/8390.c @@ -299,7 +299,7 @@ static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev) * Slow phase with lock held. */ - disable_irq_nosync_lockdep(dev->irq); + disable_irq_nosync_lockdep_irqsave(dev->irq, &flags); spin_lock(&ei_local->page_lock); @@ -338,7 +338,7 @@ static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev) netif_stop_queue(dev); outb_p(ENISR_ALL, e8390_base + EN0_IMR); spin_unlock(&ei_local->page_lock); - enable_irq_lockdep(dev->irq); + enable_irq_lockdep_irqrestore(dev->irq, &flags); ei_local->stat.tx_errors++; return 1; } @@ -379,7 +379,7 @@ static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev) outb_p(ENISR_ALL, e8390_base + EN0_IMR); spin_unlock(&ei_local->page_lock); - enable_irq_lockdep(dev->irq); + enable_irq_lockdep_irqrestore(dev->irq, &flags); dev_kfree_skb (skb); ei_local->stat.tx_bytes += send_length; diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 63154774c25..ff8a8c0a26d 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -24,6 +24,9 @@ config NETDEVICES If unsure, say Y. +# All the following symbols are dependent on NETDEVICES - do not repeat +# that for each of the symbols. +if NETDEVICES config IFB tristate "Intermediate Functional Block support" @@ -2852,6 +2855,8 @@ config NETCONSOLE If you want to log kernel messages over the network, enable this. See <file:Documentation/networking/netconsole.txt> for details. +endif #NETDEVICES + config NETPOLL def_bool NETCONSOLE diff --git a/drivers/net/Space.c b/drivers/net/Space.c index 9953201c670..a67f5efc983 100644 --- a/drivers/net/Space.c +++ b/drivers/net/Space.c @@ -165,7 +165,7 @@ static struct devprobe2 mca_probes[] __initdata = { * look for EISA/PCI/MCA cards in addition to ISA cards). */ static struct devprobe2 isa_probes[] __initdata = { -#ifdef CONFIG_HP100 /* ISA, EISA & PCI */ +#if defined(CONFIG_HP100) && defined(CONFIG_ISA) /* ISA, EISA */ {hp100_probe, 0}, #endif #ifdef CONFIG_3C515 diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c index a075246f6f4..71a4f60f732 100644 --- a/drivers/net/acenic.c +++ b/drivers/net/acenic.c @@ -163,11 +163,7 @@ MODULE_DEVICE_TABLE(pci, acenic_pci_tbl); #define SET_NETDEV_DEV(net, pdev) do{} while(0) #endif -#if LINUX_VERSION_CODE >= 0x2051c #define ace_sync_irq(irq) synchronize_irq(irq) -#else -#define ace_sync_irq(irq) synchronize_irq() -#endif #ifndef offset_in_page #define offset_in_page(ptr) ((unsigned long)(ptr) & ~PAGE_MASK) diff --git a/drivers/net/appletalk/ipddp.c b/drivers/net/appletalk/ipddp.c index 7f7dd450226..b98592a8bac 100644 --- a/drivers/net/appletalk/ipddp.c +++ b/drivers/net/appletalk/ipddp.c @@ -145,9 +145,7 @@ static int ipddp_xmit(struct sk_buff *skb, struct net_device *dev) /* Create the Extended DDP header */ ddp = (struct ddpehdr *)skb->data; - ddp->deh_len = skb->len; - ddp->deh_hops = 1; - ddp->deh_pad = 0; + ddp->deh_len_hops = htons(skb->len + (1<<10)); ddp->deh_sum = 0; /* @@ -170,7 +168,6 @@ static int ipddp_xmit(struct sk_buff *skb, struct net_device *dev) ddp->deh_sport = 72; *((__u8 *)(ddp+1)) = 22; /* ddp type = IP */ - *((__u16 *)ddp)=ntohs(*((__u16 *)ddp)); /* fix up length field */ skb->protocol = htons(ETH_P_ATALK); /* Protocol has changed */ diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c index 95b28aa01f4..3ecf2cc53a7 100644 --- a/drivers/net/arm/at91_ether.c +++ b/drivers/net/arm/at91_ether.c @@ -947,7 +947,7 @@ static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_add return -ENOMEM; dev->base_addr = AT91_VA_BASE_EMAC; - dev->irq = AT91_ID_EMAC; + dev->irq = AT91RM9200_ID_EMAC; SET_MODULE_OWNER(dev); /* Install the interrupt handler */ diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 7fcf015021e..6b4edb63c4c 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -56,8 +56,8 @@ #define DRV_MODULE_NAME "bnx2" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "1.4.44" -#define DRV_MODULE_RELDATE "August 10, 2006" +#define DRV_MODULE_VERSION "1.4.45" +#define DRV_MODULE_RELDATE "September 29, 2006" #define RUN_AT(x) (jiffies + (x)) @@ -5805,6 +5805,34 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) bp->cmd_ticks_int = bp->cmd_ticks; } + /* Disable MSI on 5706 if AMD 8132 bridge is found. + * + * MSI is defined to be 32-bit write. The 5706 does 64-bit MSI writes + * with byte enables disabled on the unused 32-bit word. This is legal + * but causes problems on the AMD 8132 which will eventually stop + * responding after a while. + * + * AMD believes this incompatibility is unique to the 5706, and + * prefers to locally disable MSI rather than globally disabling it + * using pci_msi_quirk. + */ + if (CHIP_NUM(bp) == CHIP_NUM_5706 && disable_msi == 0) { + struct pci_dev *amd_8132 = NULL; + + while ((amd_8132 = pci_get_device(PCI_VENDOR_ID_AMD, + PCI_DEVICE_ID_AMD_8132_BRIDGE, + amd_8132))) { + u8 rev; + + pci_read_config_byte(amd_8132, PCI_REVISION_ID, &rev); + if (rev >= 0x10 && rev <= 0x13) { + disable_msi = 1; + pci_dev_put(amd_8132); + break; + } + } + } + bp->autoneg = AUTONEG_SPEED | AUTONEG_FLOW_CTRL; bp->req_line_speed = 0; if (bp->phy_flags & PHY_SERDES_FLAG) { diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index 6a407070c2e..3fb354d9c51 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -85,6 +85,7 @@ #define AD_LINK_SPEED_BITMASK_10MBPS 0x2 #define AD_LINK_SPEED_BITMASK_100MBPS 0x4 #define AD_LINK_SPEED_BITMASK_1000MBPS 0x8 +#define AD_LINK_SPEED_BITMASK_10000MBPS 0x10 //endalloun // compare MAC addresses @@ -99,7 +100,7 @@ static u16 __get_link_speed(struct port *port); static u8 __get_duplex(struct port *port); static inline void __initialize_port_locks(struct port *port); //conversions -static void __ntohs_lacpdu(struct lacpdu *lacpdu); +static void __htons_lacpdu(struct lacpdu *lacpdu); static u16 __ad_timer_to_ticks(u16 timer_type, u16 Par); @@ -330,7 +331,8 @@ static inline void __release_rx_machine_lock(struct port *port) * 0, * %AD_LINK_SPEED_BITMASK_10MBPS, * %AD_LINK_SPEED_BITMASK_100MBPS, - * %AD_LINK_SPEED_BITMASK_1000MBPS + * %AD_LINK_SPEED_BITMASK_1000MBPS, + * %AD_LINK_SPEED_BITMASK_10000MBPS */ static u16 __get_link_speed(struct port *port) { @@ -357,6 +359,10 @@ static u16 __get_link_speed(struct port *port) speed = AD_LINK_SPEED_BITMASK_1000MBPS; break; + case SPEED_10000: + speed = AD_LINK_SPEED_BITMASK_10000MBPS; + break; + default: speed = 0; // unknown speed value from ethtool. shouldn't happen break; @@ -414,23 +420,23 @@ static inline void __initialize_port_locks(struct port *port) //conversions /** - * __ntohs_lacpdu - convert the contents of a LACPDU to host byte order + * __htons_lacpdu - convert the contents of a LACPDU to network byte order * @lacpdu: the speicifed lacpdu * * For each multi-byte field in the lacpdu, convert its content */ -static void __ntohs_lacpdu(struct lacpdu *lacpdu) +static void __htons_lacpdu(struct lacpdu *lacpdu) { if (lacpdu) { - lacpdu->actor_system_priority = ntohs(lacpdu->actor_system_priority); - lacpdu->actor_key = ntohs(lacpdu->actor_key); - lacpdu->actor_port_priority = ntohs(lacpdu->actor_port_priority); - lacpdu->actor_port = ntohs(lacpdu->actor_port); - lacpdu->partner_system_priority = ntohs(lacpdu->partner_system_priority); - lacpdu->partner_key = ntohs(lacpdu->partner_key); - lacpdu->partner_port_priority = ntohs(lacpdu->partner_port_priority); - lacpdu->partner_port = ntohs(lacpdu->partner_port); - lacpdu->collector_max_delay = ntohs(lacpdu->collector_max_delay); + lacpdu->actor_system_priority = htons(lacpdu->actor_system_priority); + lacpdu->actor_key = htons(lacpdu->actor_key); + lacpdu->actor_port_priority = htons(lacpdu->actor_port_priority); + lacpdu->actor_port = htons(lacpdu->actor_port); + lacpdu->partner_system_priority = htons(lacpdu->partner_system_priority); + lacpdu->partner_key = htons(lacpdu->partner_key); + lacpdu->partner_port_priority = htons(lacpdu->partner_port_priority); + lacpdu->partner_port = htons(lacpdu->partner_port); + lacpdu->collector_max_delay = htons(lacpdu->collector_max_delay); } } @@ -490,11 +496,11 @@ static void __record_pdu(struct lacpdu *lacpdu, struct port *port) // validate lacpdu and port if (lacpdu && port) { // record the new parameter values for the partner operational - port->partner_oper_port_number = lacpdu->actor_port; - port->partner_oper_port_priority = lacpdu->actor_port_priority; + port->partner_oper_port_number = ntohs(lacpdu->actor_port); + port->partner_oper_port_priority = ntohs(lacpdu->actor_port_priority); port->partner_oper_system = lacpdu->actor_system; - port->partner_oper_system_priority = lacpdu->actor_system_priority; - port->partner_oper_key = lacpdu->actor_key; + port->partner_oper_system_priority = ntohs(lacpdu->actor_system_priority); + port->partner_oper_key = ntohs(lacpdu->actor_key); // zero partener's lase states port->partner_oper_port_state = 0; port->partner_oper_port_state |= (lacpdu->actor_state & AD_STATE_LACP_ACTIVITY); @@ -561,11 +567,11 @@ static void __update_selected(struct lacpdu *lacpdu, struct port *port) // validate lacpdu and port if (lacpdu && port) { // check if any parameter is different - if ((lacpdu->actor_port != port->partner_oper_port_number) || - (lacpdu->actor_port_priority != port->partner_oper_port_priority) || + if ((ntohs(lacpdu->actor_port) != port->partner_oper_port_number) || + (ntohs(lacpdu->actor_port_priority) != port->partner_oper_port_priority) || MAC_ADDRESS_COMPARE(&(lacpdu->actor_system), &(port->partner_oper_system)) || - (lacpdu->actor_system_priority != port->partner_oper_system_priority) || - (lacpdu->actor_key != port->partner_oper_key) || + (ntohs(lacpdu->actor_system_priority) != port->partner_oper_system_priority) || + (ntohs(lacpdu->actor_key) != port->partner_oper_key) || ((lacpdu->actor_state & AD_STATE_AGGREGATION) != (port->partner_oper_port_state & AD_STATE_AGGREGATION)) ) { // update the state machine Selected variable @@ -628,11 +634,11 @@ static void __choose_matched(struct lacpdu *lacpdu, struct port *port) // validate lacpdu and port if (lacpdu && port) { // check if all parameters are alike - if (((lacpdu->partner_port == port->actor_port_number) && - (lacpdu->partner_port_priority == port->actor_port_priority) && + if (((ntohs(lacpdu->partner_port) == port->actor_port_number) && + (ntohs(lacpdu->partner_port_priority) == port->actor_port_priority) && !MAC_ADDRESS_COMPARE(&(lacpdu->partner_system), &(port->actor_system)) && - (lacpdu->partner_system_priority == port->actor_system_priority) && - (lacpdu->partner_key == port->actor_oper_port_key) && + (ntohs(lacpdu->partner_system_priority) == port->actor_system_priority) && + (ntohs(lacpdu->partner_key) == port->actor_oper_port_key) && ((lacpdu->partner_state & AD_STATE_AGGREGATION) == (port->actor_oper_port_state & AD_STATE_AGGREGATION))) || // or this is individual link(aggregation == FALSE) ((lacpdu->actor_state & AD_STATE_AGGREGATION) == 0) @@ -662,11 +668,11 @@ static void __update_ntt(struct lacpdu *lacpdu, struct port *port) // validate lacpdu and port if (lacpdu && port) { // check if any parameter is different - if ((lacpdu->partner_port != port->actor_port_number) || - (lacpdu->partner_port_priority != port->actor_port_priority) || + if ((ntohs(lacpdu->partner_port) != port->actor_port_number) || + (ntohs(lacpdu->partner_port_priority) != port->actor_port_priority) || MAC_ADDRESS_COMPARE(&(lacpdu->partner_system), &(port->actor_system)) || - (lacpdu->partner_system_priority != port->actor_system_priority) || - (lacpdu->partner_key != port->actor_oper_port_key) || + (ntohs(lacpdu->partner_system_priority) != port->actor_system_priority) || + (ntohs(lacpdu->partner_key) != port->actor_oper_port_key) || ((lacpdu->partner_state & AD_STATE_LACP_ACTIVITY) != (port->actor_oper_port_state & AD_STATE_LACP_ACTIVITY)) || ((lacpdu->partner_state & AD_STATE_LACP_TIMEOUT) != (port->actor_oper_port_state & AD_STATE_LACP_TIMEOUT)) || ((lacpdu->partner_state & AD_STATE_SYNCHRONIZATION) != (port->actor_oper_port_state & AD_STATE_SYNCHRONIZATION)) || @@ -775,6 +781,9 @@ static u32 __get_agg_bandwidth(struct aggregator *aggregator) case AD_LINK_SPEED_BITMASK_1000MBPS: bandwidth = aggregator->num_of_ports * 1000; break; + case AD_LINK_SPEED_BITMASK_10000MBPS: + bandwidth = aggregator->num_of_ports * 10000; + break; default: bandwidth=0; // to silent the compilor .... } @@ -847,7 +856,7 @@ static inline void __update_lacpdu_from_port(struct port *port) */ /* Convert all non u8 parameters to Big Endian for transmit */ - __ntohs_lacpdu(lacpdu); + __htons_lacpdu(lacpdu); } ////////////////////////////////////////////////////////////////////////////////////// @@ -2171,7 +2180,6 @@ static void bond_3ad_rx_indication(struct lacpdu *lacpdu, struct slave *slave, u switch (lacpdu->subtype) { case AD_TYPE_LACPDU: - __ntohs_lacpdu(lacpdu); dprintk("Received LACPDU on port %d\n", port->actor_port_number); ad_rx_machine(lacpdu, port); break; diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 850aae21a2f..c0bbddae4ec 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -96,6 +96,7 @@ static char *lacp_rate = NULL; static char *xmit_hash_policy = NULL; static int arp_interval = BOND_LINK_ARP_INTERV; static char *arp_ip_target[BOND_MAX_ARP_TARGETS] = { NULL, }; +static char *arp_validate = NULL; struct bond_params bonding_defaults; module_param(max_bonds, int, 0); @@ -127,6 +128,8 @@ module_param(arp_interval, int, 0); MODULE_PARM_DESC(arp_interval, "arp interval in milliseconds"); module_param_array(arp_ip_target, charp, NULL, 0); MODULE_PARM_DESC(arp_ip_target, "arp targets in n.n.n.n form"); +module_param(arp_validate, charp, 0); +MODULE_PARM_DESC(arp_validate, "validate src/dst of ARP probes: none (default), active, backup or all"); /*----------------------------- Global variables ----------------------------*/ @@ -170,6 +173,14 @@ struct bond_parm_tbl xmit_hashtype_tbl[] = { { NULL, -1}, }; +struct bond_parm_tbl arp_validate_tbl[] = { +{ "none", BOND_ARP_VALIDATE_NONE}, +{ "active", BOND_ARP_VALIDATE_ACTIVE}, +{ "backup", BOND_ARP_VALIDATE_BACKUP}, +{ "all", BOND_ARP_VALIDATE_ALL}, +{ NULL, -1}, +}; + /*-------------------------- Forward declarations ---------------------------*/ static void bond_send_gratuitous_arp(struct bonding *bond); @@ -638,6 +649,7 @@ verify: case SPEED_10: case SPEED_100: case SPEED_1000: + case SPEED_10000: break; default: return -1; @@ -1210,10 +1222,14 @@ static int bond_compute_features(struct bonding *bond) unsigned long features = BOND_INTERSECT_FEATURES; struct slave *slave; struct net_device *bond_dev = bond->dev; + unsigned short max_hard_header_len = ETH_HLEN; int i; - bond_for_each_slave(bond, slave, i) + bond_for_each_slave(bond, slave, i) { features &= (slave->dev->features & BOND_INTERSECT_FEATURES); + if (slave->dev->hard_header_len > max_hard_header_len) + max_hard_header_len = slave->dev->hard_header_len; + } if ((features & NETIF_F_SG) && !(features & NETIF_F_ALL_CSUM)) @@ -1231,6 +1247,7 @@ static int bond_compute_features(struct bonding *bond) features |= (bond_dev->features & ~BOND_INTERSECT_FEATURES); bond_dev->features = features; + bond_dev->hard_header_len = max_hard_header_len; return 0; } @@ -1365,6 +1382,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) } new_slave->dev = slave_dev; + slave_dev->priv_flags |= IFF_BONDING; if ((bond->params.mode == BOND_MODE_TLB) || (bond->params.mode == BOND_MODE_ALB)) { @@ -1417,6 +1435,8 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) bond_compute_features(bond); + new_slave->last_arp_rx = jiffies; + if (bond->params.miimon && !bond->params.use_carrier) { link_reporting = bond_check_dev_link(bond, slave_dev, 1); @@ -1493,29 +1513,8 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) switch (bond->params.mode) { case BOND_MODE_ACTIVEBACKUP: - /* if we're in active-backup mode, we need one and - * only one active interface. The backup interfaces - * will have their SLAVE_INACTIVE flag set because we - * need them to be drop all packets. Thus, since we - * guarantee that curr_active_slave always point to - * the last usable interface, we just have to verify - * this interface's flag. - */ - if (((!bond->curr_active_slave) || - (bond->curr_active_slave->dev->priv_flags & IFF_SLAVE_INACTIVE)) && - (new_slave->link != BOND_LINK_DOWN)) { - /* first slave or no active slave yet, and this link - is OK, so make this interface the active one */ - bond_change_active_slave(bond, new_slave); - printk(KERN_INFO DRV_NAME - ": %s: first active interface up!\n", - bond->dev->name); - netif_carrier_on(bond->dev); - - } else { - dprintk("This is just a backup slave\n"); - bond_set_slave_inactive_flags(new_slave); - } + bond_set_slave_inactive_flags(new_slave); + bond_select_active_slave(bond); break; case BOND_MODE_8023AD: /* in 802.3ad mode, the internal mechanism @@ -1778,7 +1777,8 @@ int bond_release(struct net_device *bond_dev, struct net_device *slave_dev) dev_set_mac_address(slave_dev, &addr); slave_dev->priv_flags &= ~(IFF_MASTER_8023AD | IFF_MASTER_ALB | - IFF_SLAVE_INACTIVE); + IFF_SLAVE_INACTIVE | IFF_BONDING | + IFF_SLAVE_NEEDARP); kfree(slave); @@ -2252,7 +2252,7 @@ static u32 bond_glean_dev_ip(struct net_device *dev) { struct in_device *idev; struct in_ifaddr *ifa; - u32 addr = 0; + __be32 addr = 0; if (!dev) return 0; @@ -2291,6 +2291,25 @@ static int bond_has_ip(struct bonding *bond) return 0; } +static int bond_has_this_ip(struct bonding *bond, u32 ip) +{ + struct vlan_entry *vlan, *vlan_next; + + if (ip == bond->master_ip) + return 1; + + if (list_empty(&bond->vlan_list)) + return 0; + + list_for_each_entry_safe(vlan, vlan_next, &bond->vlan_list, + vlan_list) { + if (ip == vlan->vlan_ip) + return 1; + } + + return 0; +} + /* * We go to the (large) trouble of VLAN tagging ARP frames because * switches in VLAN mode (especially if ports are configured as @@ -2429,6 +2448,93 @@ static void bond_send_gratuitous_arp(struct bonding *bond) } } +static void bond_validate_arp(struct bonding *bond, struct slave *slave, u32 sip, u32 tip) +{ + int i; + u32 *targets = bond->params.arp_targets; + + targets = bond->params.arp_targets; + for (i = 0; (i < BOND_MAX_ARP_TARGETS) && targets[i]; i++) { + dprintk("bva: sip %u.%u.%u.%u tip %u.%u.%u.%u t[%d] " + "%u.%u.%u.%u bhti(tip) %d\n", + NIPQUAD(sip), NIPQUAD(tip), i, NIPQUAD(targets[i]), + bond_has_this_ip(bond, tip)); + if (sip == targets[i]) { + if (bond_has_this_ip(bond, tip)) + slave->last_arp_rx = jiffies; + return; + } + } +} + +static int bond_arp_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev) +{ + struct arphdr *arp; + struct slave *slave; + struct bonding *bond; + unsigned char *arp_ptr; + u32 sip, tip; + + if (!(dev->priv_flags & IFF_BONDING) || !(dev->flags & IFF_MASTER)) + goto out; + + bond = dev->priv; + read_lock(&bond->lock); + + dprintk("bond_arp_rcv: bond %s skb->dev %s orig_dev %s\n", + bond->dev->name, skb->dev ? skb->dev->name : "NULL", + orig_dev ? orig_dev->name : "NULL"); + + slave = bond_get_slave_by_dev(bond, orig_dev); + if (!slave || !slave_do_arp_validate(bond, slave)) + goto out_unlock; + + /* ARP header, plus 2 device addresses, plus 2 IP addresses. */ + if (!pskb_may_pull(skb, (sizeof(struct arphdr) + + (2 * dev->addr_len) + + (2 * sizeof(u32))))) + goto out_unlock; + + arp = skb->nh.arph; + if (arp->ar_hln != dev->addr_len || + skb->pkt_type == PACKET_OTHERHOST || + skb->pkt_type == PACKET_LOOPBACK || + arp->ar_hrd != htons(ARPHRD_ETHER) || + arp->ar_pro != htons(ETH_P_IP) || + arp->ar_pln != 4) + goto out_unlock; + + arp_ptr = (unsigned char *)(arp + 1); + arp_ptr += dev->addr_len; + memcpy(&sip, arp_ptr, 4); + arp_ptr += 4 + dev->addr_len; + memcpy(&tip, arp_ptr, 4); + + dprintk("bond_arp_rcv: %s %s/%d av %d sv %d sip %u.%u.%u.%u" + " tip %u.%u.%u.%u\n", bond->dev->name, slave->dev->name, + slave->state, bond->params.arp_validate, + slave_do_arp_validate(bond, slave), NIPQUAD(sip), NIPQUAD(tip)); + + /* + * Backup slaves won't see the ARP reply, but do come through + * here for each ARP probe (so we swap the sip/tip to validate + * the probe). In a "redundant switch, common router" type of + * configuration, the ARP probe will (hopefully) travel from + * the active, through one switch, the router, then the other + * switch before reaching the backup. + */ + if (slave->state == BOND_STATE_ACTIVE) + bond_validate_arp(bond, slave, sip, tip); + else + bond_validate_arp(bond, slave, tip, sip); + +out_unlock: + read_unlock(&bond->lock); +out: + dev_kfree_skb(skb); + return NET_RX_SUCCESS; +} + /* * this function is called regularly to monitor each slave's link * ensuring that traffic is being sent and received when arp monitoring @@ -2593,7 +2699,8 @@ void bond_activebackup_arp_mon(struct net_device *bond_dev) */ bond_for_each_slave(bond, slave, i) { if (slave->link != BOND_LINK_UP) { - if ((jiffies - slave->dev->last_rx) <= delta_in_ticks) { + if ((jiffies - slave_last_rx(bond, slave)) <= + delta_in_ticks) { slave->link = BOND_LINK_UP; @@ -2638,7 +2745,7 @@ void bond_activebackup_arp_mon(struct net_device *bond_dev) if ((slave != bond->curr_active_slave) && (!bond->current_arp_slave) && - (((jiffies - slave->dev->last_rx) >= 3*delta_in_ticks) && + (((jiffies - slave_last_rx(bond, slave)) >= 3*delta_in_ticks) && bond_has_ip(bond))) { /* a backup slave has gone down; three times * the delta allows the current slave to be @@ -2685,7 +2792,7 @@ void bond_activebackup_arp_mon(struct net_device *bond_dev) * if it is up and needs to take over as the curr_active_slave */ if ((((jiffies - slave->dev->trans_start) >= (2*delta_in_ticks)) || - (((jiffies - slave->dev->last_rx) >= (2*delta_in_ticks)) && + (((jiffies - slave_last_rx(bond, slave)) >= (2*delta_in_ticks)) && bond_has_ip(bond))) && ((jiffies - slave->jiffies) >= 2*delta_in_ticks)) { @@ -2950,7 +3057,7 @@ static void bond_info_show_slave(struct seq_file *seq, const struct slave *slave seq_printf(seq, "\nSlave Interface: %s\n", slave->dev->name); seq_printf(seq, "MII Status: %s\n", (slave->link == BOND_LINK_UP) ? "up" : "down"); - seq_printf(seq, "Link Failure Count: %d\n", + seq_printf(seq, "Link Failure Count: %u\n", slave->link_failure_count); seq_printf(seq, @@ -3210,6 +3317,9 @@ static int bond_netdev_event(struct notifier_block *this, unsigned long event, v (event_dev ? event_dev->name : "None"), event); + if (!(event_dev->priv_flags & IFF_BONDING)) + return NOTIFY_DONE; + if (event_dev->flags & IFF_MASTER) { dprintk("IFF_MASTER\n"); return bond_master_netdev_event(event, event_dev); @@ -3305,6 +3415,21 @@ static void bond_unregister_lacpdu(struct bonding *bond) dev_remove_pack(&(BOND_AD_INFO(bond).ad_pkt_type)); } +void bond_register_arp(struct bonding *bond) +{ + struct packet_type *pt = &bond->arp_mon_pt; + + pt->type = htons(ETH_P_ARP); + pt->dev = NULL; /*bond->dev;XXX*/ + pt->func = bond_arp_rcv; + dev_add_pack(pt); +} + +void bond_unregister_arp(struct bonding *bond) +{ + dev_remove_pack(&bond->arp_mon_pt); +} + /*---------------------------- Hashing Policies -----------------------------*/ /* @@ -3391,6 +3516,9 @@ static int bond_open(struct net_device *bond_dev) } else { arp_timer->function = (void *)&bond_loadbalance_arp_mon; } + if (bond->params.arp_validate) + bond_register_arp(bond); + add_timer(arp_timer); } @@ -3418,9 +3546,11 @@ static int bond_close(struct net_device *bond_dev) bond_unregister_lacpdu(bond); } + if (bond->params.arp_validate) + bond_unregister_arp(bond); + write_lock_bh(&bond->lock); - bond_mc_list_destroy(bond); /* signal timers not to re-arm */ bond->kill_timers = 1; @@ -3451,8 +3581,6 @@ static int bond_close(struct net_device *bond_dev) break; } - /* Release the bonded slaves */ - bond_release_all(bond_dev); if ((bond->params.mode == BOND_MODE_TLB) || (bond->params.mode == BOND_MODE_ALB)) { @@ -4179,6 +4307,7 @@ static int bond_init(struct net_device *bond_dev, struct bond_params *params) /* Initialize the device options */ bond_dev->tx_queue_len = 0; bond_dev->flags |= IFF_MASTER|IFF_MULTICAST; + bond_dev->priv_flags |= IFF_BONDING; /* At first, we block adding VLANs. That's the only way to * prevent problems that occur when adding VLANs over an @@ -4237,6 +4366,9 @@ static void bond_free_all(void) list_for_each_entry_safe(bond, nxt, &bond_dev_list, bond_list) { struct net_device *bond_dev = bond->dev; + bond_mc_list_destroy(bond); + /* Release the bonded slaves */ + bond_release_all(bond_dev); unregister_netdevice(bond_dev); bond_deinit(bond_dev); } @@ -4270,6 +4402,8 @@ int bond_parse_parm(char *mode_arg, struct bond_parm_tbl *tbl) static int bond_check_params(struct bond_params *params) { + int arp_validate_value; + /* * Convert string parameters. */ @@ -4473,6 +4607,29 @@ static int bond_check_params(struct bond_params *params) arp_interval = 0; } + if (arp_validate) { + if (bond_mode != BOND_MODE_ACTIVEBACKUP) { + printk(KERN_ERR DRV_NAME + ": arp_validate only supported in active-backup mode\n"); + return -EINVAL; + } + if (!arp_interval) { + printk(KERN_ERR DRV_NAME + ": arp_validate requires arp_interval\n"); + return -EINVAL; + } + + arp_validate_value = bond_parse_parm(arp_validate, + arp_validate_tbl); + if (arp_validate_value == -1) { + printk(KERN_ERR DRV_NAME + ": Error: invalid arp_validate \"%s\"\n", + arp_validate == NULL ? "NULL" : arp_validate); + return -EINVAL; + } + } else + arp_validate_value = 0; + if (miimon) { printk(KERN_INFO DRV_NAME ": MII link monitoring set to %d ms\n", @@ -4481,8 +4638,10 @@ static int bond_check_params(struct bond_params *params) int i; printk(KERN_INFO DRV_NAME - ": ARP monitoring set to %d ms with %d target(s):", - arp_interval, arp_ip_count); + ": ARP monitoring set to %d ms, validate %s, with %d target(s):", + arp_interval, + arp_validate_tbl[arp_validate_value].modename, + arp_ip_count); for (i = 0; i < arp_ip_count; i++) printk (" %s", arp_ip_target[i]); @@ -4516,6 +4675,7 @@ static int bond_check_params(struct bond_params *params) params->xmit_policy = xmit_hashtype; params->miimon = miimon; params->arp_interval = arp_interval; + params->arp_validate = arp_validate_value; params->updelay = updelay; params->downdelay = downdelay; params->use_carrier = use_carrier; diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index cfe4dc3a93a..ced9ed8f995 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -51,6 +51,7 @@ extern struct bond_params bonding_defaults; extern struct bond_parm_tbl bond_mode_tbl[]; extern struct bond_parm_tbl bond_lacp_tbl[]; extern struct bond_parm_tbl xmit_hashtype_tbl[]; +extern struct bond_parm_tbl arp_validate_tbl[]; static int expected_refcount = -1; static struct class *netdev_class; @@ -503,6 +504,53 @@ out: static CLASS_DEVICE_ATTR(xmit_hash_policy, S_IRUGO | S_IWUSR, bonding_show_xmit_hash, bonding_store_xmit_hash); /* + * Show and set arp_validate. + */ +static ssize_t bonding_show_arp_validate(struct class_device *cd, char *buf) +{ + struct bonding *bond = to_bond(cd); + + return sprintf(buf, "%s %d\n", + arp_validate_tbl[bond->params.arp_validate].modename, + bond->params.arp_validate) + 1; +} + +static ssize_t bonding_store_arp_validate(struct class_device *cd, const char *buf, size_t count) +{ + int new_value; + struct bonding *bond = to_bond(cd); + + new_value = bond_parse_parm((char *)buf, arp_validate_tbl); + if (new_value < 0) { + printk(KERN_ERR DRV_NAME + ": %s: Ignoring invalid arp_validate value %s\n", + bond->dev->name, buf); + return -EINVAL; + } + if (new_value && (bond->params.mode != BOND_MODE_ACTIVEBACKUP)) { + printk(KERN_ERR DRV_NAME + ": %s: arp_validate only supported in active-backup mode.\n", + bond->dev->name); + return -EINVAL; + } + printk(KERN_INFO DRV_NAME ": %s: setting arp_validate to %s (%d).\n", + bond->dev->name, arp_validate_tbl[new_value].modename, + new_value); + + if (!bond->params.arp_validate && new_value) { + bond_register_arp(bond); + } else if (bond->params.arp_validate && !new_value) { + bond_unregister_arp(bond); + } + + bond->params.arp_validate = new_value; + + return count; +} + +static CLASS_DEVICE_ATTR(arp_validate, S_IRUGO | S_IWUSR, bonding_show_arp_validate, bonding_store_arp_validate); + +/* * Show and set the arp timer interval. There are two tricky bits * here. First, if ARP monitoring is activated, then we must disable * MII monitoring. Second, if the ARP timer isn't running, we must @@ -914,6 +962,11 @@ static ssize_t bonding_store_miimon(struct class_device *cd, const char *buf, si "ARP monitoring. Disabling ARP monitoring...\n", bond->dev->name); bond->params.arp_interval = 0; + if (bond->params.arp_validate) { + bond_unregister_arp(bond); + bond->params.arp_validate = + BOND_ARP_VALIDATE_NONE; + } /* Kill ARP timer, else it brings bond's link down */ if (bond->mii_timer.function) { printk(KERN_INFO DRV_NAME @@ -1093,7 +1146,7 @@ static ssize_t bonding_store_active_slave(struct class_device *cd, const char *b strlen(slave->dev->name)) == 0) { old_active = bond->curr_active_slave; new_active = slave; - if (new_active && (new_active == old_active)) { + if (new_active == old_active) { /* do nothing */ printk(KERN_INFO DRV_NAME ": %s: %s is already the current active slave.\n", @@ -1273,6 +1326,7 @@ static CLASS_DEVICE_ATTR(ad_partner_mac, S_IRUGO, bonding_show_ad_partner_mac, N static struct attribute *per_bond_attrs[] = { &class_device_attr_slaves.attr, &class_device_attr_mode.attr, + &class_device_attr_arp_validate.attr, &class_device_attr_arp_interval.attr, &class_device_attr_arp_ip_target.attr, &class_device_attr_downdelay.attr, diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h index 0bdfe2c7145..dc434fb6da8 100644 --- a/drivers/net/bonding/bonding.h +++ b/drivers/net/bonding/bonding.h @@ -22,8 +22,8 @@ #include "bond_3ad.h" #include "bond_alb.h" -#define DRV_VERSION "3.0.3" -#define DRV_RELDATE "March 23, 2006" +#define DRV_VERSION "3.1.1" +#define DRV_RELDATE "September 26, 2006" #define DRV_NAME "bonding" #define DRV_DESCRIPTION "Ethernet Channel Bonding Driver" @@ -126,6 +126,7 @@ struct bond_params { int xmit_policy; int miimon; int arp_interval; + int arp_validate; int use_carrier; int updelay; int downdelay; @@ -149,8 +150,9 @@ struct slave { struct net_device *dev; /* first - useful for panic debug */ struct slave *next; struct slave *prev; - s16 delay; + int delay; u32 jiffies; + u32 last_arp_rx; s8 link; /* one of BOND_LINK_XXXX */ s8 state; /* one of BOND_STATE_XXXX */ u32 original_flags; @@ -198,6 +200,7 @@ struct bonding { struct bond_params params; struct list_head vlan_list; struct vlan_group *vlgrp; + struct packet_type arp_mon_pt; }; /** @@ -228,6 +231,25 @@ static inline struct bonding *bond_get_bond_by_slave(struct slave *slave) return (struct bonding *)slave->dev->master->priv; } +#define BOND_ARP_VALIDATE_NONE 0 +#define BOND_ARP_VALIDATE_ACTIVE (1 << BOND_STATE_ACTIVE) +#define BOND_ARP_VALIDATE_BACKUP (1 << BOND_STATE_BACKUP) +#define BOND_ARP_VALIDATE_ALL (BOND_ARP_VALIDATE_ACTIVE | \ + BOND_ARP_VALIDATE_BACKUP) + +extern inline int slave_do_arp_validate(struct bonding *bond, struct slave *slave) +{ + return bond->params.arp_validate & (1 << slave->state); +} + +extern inline u32 slave_last_rx(struct bonding *bond, struct slave *slave) +{ + if (slave_do_arp_validate(bond, slave)) + return slave->last_arp_rx; + + return slave->dev->last_rx; +} + static inline void bond_set_slave_inactive_flags(struct slave *slave) { struct bonding *bond = slave->dev->master->priv; @@ -235,12 +257,14 @@ static inline void bond_set_slave_inactive_flags(struct slave *slave) bond->params.mode != BOND_MODE_ALB) slave->state = BOND_STATE_BACKUP; slave->dev->priv_flags |= IFF_SLAVE_INACTIVE; + if (slave_do_arp_validate(bond, slave)) + slave->dev->priv_flags |= IFF_SLAVE_NEEDARP; } static inline void bond_set_slave_active_flags(struct slave *slave) { slave->state = BOND_STATE_ACTIVE; - slave->dev->priv_flags &= ~IFF_SLAVE_INACTIVE; + slave->dev->priv_flags &= ~(IFF_SLAVE_INACTIVE | IFF_SLAVE_NEEDARP); } static inline void bond_set_master_3ad_flags(struct bonding *bond) @@ -284,6 +308,8 @@ int bond_parse_parm(char *mode_arg, struct bond_parm_tbl *tbl); const char *bond_mode_name(int mode); void bond_select_active_slave(struct bonding *bond); void bond_change_active_slave(struct bonding *bond, struct slave *new_active); +void bond_register_arp(struct bonding *); +void bond_unregister_arp(struct bonding *); #endif /* _LINUX_BONDING_H */ diff --git a/drivers/net/dgrs.c b/drivers/net/dgrs.c index e9361cb5f4c..d0842527b36 100644 --- a/drivers/net/dgrs.c +++ b/drivers/net/dgrs.c @@ -110,7 +110,6 @@ static char version[] __initdata = * DGRS include files */ typedef unsigned char uchar; -typedef unsigned int bool; #define vol volatile #include "dgrs.h" diff --git a/drivers/net/e100.c b/drivers/net/e100.c index dc5e38aefca..26073c34521 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -1,27 +1,27 @@ /******************************************************************************* - - Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. + Intel PRO/100 Linux driver + Copyright(c) 1999 - 2006 Intel Corporation. This program is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by the Free - Software Foundation; either version 2 of the License, or (at your option) - any later version. + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. - This program is distributed in the hope that it will be useful, but WITHOUT + This program is distributed in the hope it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., 59 - Temple Place - Suite 330, Boston, MA 02111-1307, USA. + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - The full GNU General Public License is included in this distribution in the - file called LICENSE. + The full GNU General Public License is included in this distribution in + the file called "COPYING". Contact Information: Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 *******************************************************************************/ @@ -159,7 +159,7 @@ #define DRV_NAME "e100" #define DRV_EXT "-NAPI" -#define DRV_VERSION "3.5.16-k2"DRV_EXT +#define DRV_VERSION "3.5.17-k2"DRV_EXT #define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver" #define DRV_COPYRIGHT "Copyright(c) 1999-2006 Intel Corporation" #define PFX DRV_NAME ": " @@ -1657,13 +1657,14 @@ static int e100_tx_clean(struct nic *nic) spin_lock(&nic->cb_lock); - DPRINTK(TX_DONE, DEBUG, "cb->status = 0x%04X\n", - nic->cb_to_clean->status); - /* Clean CBs marked complete */ for(cb = nic->cb_to_clean; cb->status & cpu_to_le16(cb_complete); cb = nic->cb_to_clean = cb->next) { + DPRINTK(TX_DONE, DEBUG, "cb[%d]->status = 0x%04X\n", + (int)(((void*)cb - (void*)nic->cbs)/sizeof(struct cb)), + cb->status); + if(likely(cb->skb != NULL)) { nic->net_stats.tx_packets++; nic->net_stats.tx_bytes += cb->skb->len; @@ -2572,7 +2573,7 @@ static int __devinit e100_probe(struct pci_dev *pdev, #ifdef CONFIG_NET_POLL_CONTROLLER netdev->poll_controller = e100_netpoll; #endif - strcpy(netdev->name, pci_name(pdev)); + strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); nic = netdev_priv(netdev); nic->netdev = netdev; @@ -2714,68 +2715,56 @@ static void __devexit e100_remove(struct pci_dev *pdev) } } -#ifdef CONFIG_PM static int e100_suspend(struct pci_dev *pdev, pm_message_t state) { struct net_device *netdev = pci_get_drvdata(pdev); struct nic *nic = netdev_priv(netdev); - int retval; - if(netif_running(netdev)) + if (netif_running(netdev)) e100_down(nic); e100_hw_reset(nic); netif_device_detach(netdev); +#ifdef CONFIG_PM pci_save_state(pdev); - retval = pci_enable_wake(pdev, pci_choose_state(pdev, state), - nic->flags & (wol_magic | e100_asf(nic))); - if (retval) - DPRINTK(PROBE,ERR, "Error enabling wake\n"); + if (nic->flags & (wol_magic | e100_asf(nic))) +#else + if (nic->flags & (wol_magic)) +#endif + pci_enable_wake(pdev, pci_choose_state(pdev, state), 1); + else + /* disable PME */ + pci_enable_wake(pdev, 0, 0); + pci_disable_device(pdev); - retval = pci_set_power_state(pdev, pci_choose_state(pdev, state)); - if (retval) - DPRINTK(PROBE,ERR, "Error %d setting power state\n", retval); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); return 0; } +#ifdef CONFIG_PM static int e100_resume(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); struct nic *nic = netdev_priv(netdev); - int retval; - retval = pci_set_power_state(pdev, PCI_D0); - if (retval) - DPRINTK(PROBE,ERR, "Error waking adapter\n"); + pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); /* ack any pending wake events, disable PME */ - retval = pci_enable_wake(pdev, 0, 0); - if (retval) - DPRINTK(PROBE,ERR, "Error clearing wake events\n"); + pci_enable_wake(pdev, 0, 0); netif_device_attach(netdev); - if(netif_running(netdev)) + if (netif_running(netdev)) e100_up(nic); return 0; } -#endif +#endif /* CONFIG_PM */ static void e100_shutdown(struct pci_dev *pdev) { - struct net_device *netdev = pci_get_drvdata(pdev); - struct nic *nic = netdev_priv(netdev); - int retval; - -#ifdef CONFIG_PM - retval = pci_enable_wake(pdev, 0, nic->flags & (wol_magic | e100_asf(nic))); -#else - retval = pci_enable_wake(pdev, 0, nic->flags & (wol_magic)); -#endif - if (retval) - DPRINTK(PROBE,ERR, "Error enabling wake\n"); + e100_suspend(pdev, PMSG_SUSPEND); } /* ------------------ PCI Error Recovery infrastructure -------------- */ @@ -2859,8 +2848,9 @@ static struct pci_driver e100_driver = { .id_table = e100_id_table, .probe = e100_probe, .remove = __devexit_p(e100_remove), -#ifdef CONFIG_PM + /* Power Management hooks */ .suspend = e100_suspend, +#ifdef CONFIG_PM .resume = e100_resume, #endif .shutdown = e100_shutdown, diff --git a/drivers/net/e1000/LICENSE b/drivers/net/e1000/LICENSE deleted file mode 100644 index 5f297e5bb46..00000000000 --- a/drivers/net/e1000/LICENSE +++ /dev/null @@ -1,339 +0,0 @@ - -"This software program is licensed subject to the GNU General Public License -(GPL). Version 2, June 1991, available at -<http://www.fsf.org/copyleft/gpl.html>" - -GNU General Public License - -Version 2, June 1991 - -Copyright (C) 1989, 1991 Free Software Foundation, Inc. -59 Temple Place - Suite 330, Boston, MA 02111-1307, USA - -Everyone is permitted to copy and distribute verbatim copies of this license -document, but changing it is not allowed. - -Preamble - -The licenses for most software are designed to take away your freedom to -share and change it. By contrast, the GNU General Public License is intended -to guarantee your freedom to share and change free software--to make sure -the software is free for all its users. This General Public License applies -to most of the Free Software Foundation's software and to any other program -whose authors commit to using it. (Some other Free Software Foundation -software is covered by the GNU Library General Public License instead.) You -can apply it to your programs, too. - -When we speak of free software, we are referring to freedom, not price. Our -General Public Licenses are designed to make sure that you have the freedom -to distribute copies of free software (and charge for this service if you -wish), that you receive source code or can get it if you want it, that you -can change the software or use pieces of it in new free programs; and that -you know you can do these things. - -To protect your rights, we need to make restrictions that forbid anyone to -deny you these rights or to ask you to surrender the rights. These -restrictions translate to certain responsibilities for you if you distribute -copies of the software, or if you modify it. - -For example, if you distribute copies of such a program, whether gratis or -for a fee, you must give the recipients all the rights that you have. You -must make sure that they, too, receive or can get the source code. And you -must show them these terms so they know their rights. - -We protect your rights with two steps: (1) copyright the software, and (2) -offer you this license which gives you legal permission to copy, distribute -and/or modify the software. - -Also, for each author's protection and ours, we want to make certain that -everyone understands that there is no warranty for this free software. If -the software is modified by someone else and passed on, we want its -recipients to know that what they have is not the original, so that any -problems introduced by others will not reflect on the original authors' -reputations. - -Finally, any free program is threatened constantly by software patents. We -wish to avoid the danger that redistributors of a free program will -individually obtain patent licenses, in effect making the program -proprietary. To prevent this, we have made it clear that any patent must be -licensed for everyone's free use or not licensed at all. - -The precise terms and conditions for copying, distribution and modification -follow. - -TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION - -0. This License applies to any program or other work which contains a notice - placed by the copyright holder saying it may be distributed under the - terms of this General Public License. The "Program", below, refers to any - such program or work, and a "work based on the Program" means either the - Program or any derivative work under copyright law: that is to say, a - work containing the Program or a portion of it, either verbatim or with - modifications and/or translated into another language. (Hereinafter, - translation is included without limitation in the term "modification".) - Each licensee is addressed as "you". - - Activities other than copying, distribution and modification are not - covered by this License; they are outside its scope. The act of running - the Program is not restricted, and the output from the Program is covered - only if its contents constitute a work based on the Program (independent - of having been made by running the Program). Whether that is true depends - on what the Program does. - -1. You may copy and distribute verbatim copies of the Program's source code - as you receive it, in any medium, provided that you conspicuously and - appropriately publish on each copy an appropriate copyright notice and - disclaimer of warranty; keep intact all the notices that refer to this - License and to the absence of any warranty; and give any other recipients - of the Program a copy of this License along with the Program. - - You may charge a fee for the physical act of transferring a copy, and you - may at your option offer warranty protection in exchange for a fee. - -2. You may modify your copy or copies of the Program or any portion of it, - thus forming a work based on the Program, and copy and distribute such - modifications or work under the terms of Section 1 above, provided that - you also meet all of these conditions: - - * a) You must cause the modified files to carry prominent notices stating - that you changed the files and the date of any change. - - * b) You must cause any work that you distribute or publish, that in - whole or in part contains or is derived from the Program or any part - thereof, to be licensed as a whole at no charge to all third parties - under the terms of this License. - - * c) If the modified program normally reads commands interactively when - run, you must cause it, when started running for such interactive - use in the most ordinary way, to print or display an announcement - including an appropriate copyright notice and a notice that there is - no warranty (or else, saying that you provide a warranty) and that - users may redistribute the program under these conditions, and - telling the user how to view a copy of this License. (Exception: if - the Program itself is interactive but does not normally print such - an announcement, your work based on the Program is not required to - print an announcement.) - - These requirements apply to the modified work as a whole. If identifiable - sections of that work are not derived from the Program, and can be - reasonably considered independent and separate works in themselves, then - this License, and its terms, do not apply to those sections when you - distribute them as separate works. But when you distribute the same - sections as part of a whole which is a work based on the Program, the - distribution of the whole must be on the terms of this License, whose - permissions for other licensees extend to the entire whole, and thus to - each and every part regardless of who wrote it. - - Thus, it is not the intent of this section to claim rights or contest - your rights to work written entirely by you; rather, the intent is to - exercise the right to control the distribution of derivative or - collective works based on the Program. - - In addition, mere aggregation of another work not based on the Program - with the Program (or with a work based on the Program) on a volume of a - storage or distribution medium does not bring the other work under the - scope of this License. - -3. You may copy and distribute the Program (or a work based on it, under - Section 2) in object code or executable form under the terms of Sections - 1 and 2 above provided that you also do one of the following: - - * a) Accompany it with the complete corresponding machine-readable source - code, which must be distributed under the terms of Sections 1 and 2 - above on a medium customarily used for software interchange; or, - - * b) Accompany it with a written offer, valid for at least three years, - to give any third party, for a charge no more than your cost of - physically performing source distribution, a complete machine- - readable copy of the corresponding source code, to be distributed - under the terms of Sections 1 and 2 above on a medium customarily - used for software interchange; or, - - * c) Accompany it with the information you received as to the offer to - distribute corresponding source code. (This alternative is allowed - only for noncommercial distribution and only if you received the - program in object code or executable form with such an offer, in - accord with Subsection b above.) - - The source code for a work means the preferred form of the work for - making modifications to it. For an executable work, complete source code - means all the source code for all modules it contains, plus any - associated interface definition files, plus the scripts used to control - compilation and installation of the executable. However, as a special - exception, the source code distributed need not include anything that is - normally distributed (in either source or binary form) with the major - components (compiler, kernel, and so on) of the operating system on which - the executable runs, unless that component itself accompanies the - executable. - - If distribution of executable or object code is made by offering access - to copy from a designated place, then offering equivalent access to copy - the source code from the same place counts as distribution of the source - code, even though third parties are not compelled to copy the source - along with the object code. - -4. You may not copy, modify, sublicense, or distribute the Program except as - expressly provided under this License. Any attempt otherwise to copy, - modify, sublicense or distribute the Program is void, and will - automatically terminate your rights under this License. However, parties - who have received copies, or rights, from you under this License will not - have their licenses terminated so long as such parties remain in full - compliance. - -5. You are not required to accept this License, since you have not signed - it. However, nothing else grants you permission to modify or distribute - the Program or its derivative works. These actions are prohibited by law - if you do not accept this License. Therefore, by modifying or - distributing the Program (or any work based on the Program), you - indicate your acceptance of this License to do so, and all its terms and - conditions for copying, distributing or modifying the Program or works - based on it. - -6. Each time you redistribute the Program (or any work based on the - Program), the recipient automatically receives a license from the - original licensor to copy, distribute or modify the Program subject to - these terms and conditions. You may not impose any further restrictions - on the recipients' exercise of the rights granted herein. You are not - responsible for enforcing compliance by third parties to this License. - -7. If, as a consequence of a court judgment or allegation of patent - infringement or for any other reason (not limited to patent issues), - conditions are imposed on you (whether by court order, agreement or - otherwise) that contradict the conditions of this License, they do not - excuse you from the conditions of this License. If you cannot distribute - so as to satisfy simultaneously your obligations under this License and - any other pertinent obligations, then as a consequence you may not - distribute the Program at all. For example, if a patent license would - not permit royalty-free redistribution of the Program by all those who - receive copies directly or indirectly through you, then the only way you - could satisfy both it and this License would be to refrain entirely from - distribution of the Program. - - If any portion of this section is held invalid or unenforceable under any - particular circumstance, the balance of the section is intended to apply - and the section as a whole is intended to apply in other circumstances. - - It is not the purpose of this section to induce you to infringe any - patents or other property right claims or to contest validity of any - such claims; this section has the sole purpose of protecting the - integrity of the free software distribution system, which is implemented - by public license practices. Many people have made generous contributions - to the wide range of software distributed through that system in - reliance on consistent application of that system; it is up to the - author/donor to decide if he or she is willing to distribute software - through any other system and a licensee cannot impose that choice. - - This section is intended to make thoroughly clear what is believed to be - a consequence of the rest of this License. - -8. If the distribution and/or use of the Program is restricted in certain - countries either by patents or by copyrighted interfaces, the original - copyright holder who places the Program under this License may add an - explicit geographical distribution limitation excluding those countries, - so that distribution is permitted only in or among countries not thus - excluded. In such case, this License incorporates the limitation as if - written in the body of this License. - -9. The Free Software Foundation may publish revised and/or new versions of - the General Public License from time to time. Such new versions will be - similar in spirit to the present version, but may differ in detail to - address new problems or concerns. - - Each version is given a distinguishing version number. If the Program - specifies a version number of this License which applies to it and "any - later version", you have the option of following the terms and - conditions either of that version or of any later version published by - the Free Software Foundation. If the Program does not specify a version - number of this License, you may choose any version ever published by the - Free Software Foundation. - -10. If you wish to incorporate parts of the Program into other free programs - whose distribution conditions are different, write to the author to ask - for permission. For software which is copyrighted by the Free Software - Foundation, write to the Free Software Foundation; we sometimes make - exceptions for this. Our decision will be guided by the two goals of - preserving the free status of all derivatives of our free software and - of promoting the sharing and reuse of software generally. - - NO WARRANTY - -11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY - FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN - OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES - PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER - EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE - ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH - YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL - NECESSARY SERVICING, REPAIR OR CORRECTION. - -12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING - WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR - REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR - DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL - DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM - (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED - INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF - THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR - OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. - -END OF TERMS AND CONDITIONS - -How to Apply These Terms to Your New Programs - -If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make it free -software which everyone can redistribute and change under these terms. - -To do so, attach the following notices to the program. It is safest to -attach them to the start of each source file to most effectively convey the -exclusion of warranty; and each file should have at least the "copyright" -line and a pointer to where the full notice is found. - -one line to give the program's name and an idea of what it does. -Copyright (C) yyyy name of author - -This program is free software; you can redistribute it and/or modify it -under the terms of the GNU General Public License as published by the Free -Software Foundation; either version 2 of the License, or (at your option) -any later version. - -This program is distributed in the hope that it will be useful, but WITHOUT -ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -more details. - -You should have received a copy of the GNU General Public License along with -this program; if not, write to the Free Software Foundation, Inc., 59 -Temple Place - Suite 330, Boston, MA 02111-1307, USA. - -Also add information on how to contact you by electronic and paper mail. - -If the program is interactive, make it output a short notice like this when -it starts in an interactive mode: - -Gnomovision version 69, Copyright (C) year name of author Gnomovision comes -with ABSOLUTELY NO WARRANTY; for details type 'show w'. This is free -software, and you are welcome to redistribute it under certain conditions; -type 'show c' for details. - -The hypothetical commands 'show w' and 'show c' should show the appropriate -parts of the General Public License. Of course, the commands you use may be -called something other than 'show w' and 'show c'; they could even be -mouse-clicks or menu items--whatever suits your program. - -You should also get your employer (if you work as a programmer) or your -school, if any, to sign a "copyright disclaimer" for the program, if -necessary. Here is a sample; alter the names: - -Yoyodyne, Inc., hereby disclaims all copyright interest in the program -'Gnomovision' (which makes passes at compilers) written by James Hacker. - -signature of Ty Coon, 1 April 1989 -Ty Coon, President of Vice - -This General Public License does not permit incorporating your program into -proprietary programs. If your program is a subroutine library, you may -consider it more useful to permit linking proprietary applications with the -library. If this is what you want to do, use the GNU Library General Public -License instead of this License. diff --git a/drivers/net/e1000/Makefile b/drivers/net/e1000/Makefile index 5dea2b7dea4..4a6ab152245 100644 --- a/drivers/net/e1000/Makefile +++ b/drivers/net/e1000/Makefile @@ -1,25 +1,24 @@ ################################################################################ # -# -# Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. -# -# This program is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by the Free -# Software Foundation; either version 2 of the License, or (at your option) -# any later version. -# -# This program is distributed in the hope that it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# Intel PRO/1000 Linux driver +# Copyright(c) 1999 - 2006 Intel Corporation. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms and conditions of the GNU General Public License, +# version 2, as published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for # more details. -# +# # You should have received a copy of the GNU General Public License along with -# this program; if not, write to the Free Software Foundation, Inc., 59 -# Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# The full GNU General Public License is included in this distribution in the -# file called LICENSE. -# +# this program; if not, write to the Free Software Foundation, Inc., +# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. +# +# The full GNU General Public License is included in this distribution in +# the file called "COPYING". +# # Contact Information: # Linux NICS <linux.nics@intel.com> # e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index 98afa9c2057..7ecce438d25 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -1,25 +1,24 @@ /******************************************************************************* - - Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. - - This program is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by the Free - Software Foundation; either version 2 of the License, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2006 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., 59 - Temple Place - Suite 330, Boston, MA 02111-1307, USA. - - The full GNU General Public License is included in this distribution in the - file called LICENSE. - + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + Contact Information: Linux NICS <linux.nics@intel.com> e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> @@ -346,29 +345,9 @@ struct e1000_adapter { }; enum e1000_state_t { - __E1000_DRIVER_TESTING, + __E1000_TESTING, __E1000_RESETTING, + __E1000_DOWN }; -/* e1000_main.c */ -extern char e1000_driver_name[]; -extern char e1000_driver_version[]; -int e1000_up(struct e1000_adapter *adapter); -void e1000_down(struct e1000_adapter *adapter); -void e1000_reset(struct e1000_adapter *adapter); -void e1000_reinit_locked(struct e1000_adapter *adapter); -int e1000_setup_all_tx_resources(struct e1000_adapter *adapter); -void e1000_free_all_tx_resources(struct e1000_adapter *adapter); -int e1000_setup_all_rx_resources(struct e1000_adapter *adapter); -void e1000_free_all_rx_resources(struct e1000_adapter *adapter); -void e1000_update_stats(struct e1000_adapter *adapter); -int e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx); - -/* e1000_ethtool.c */ -void e1000_set_ethtool_ops(struct net_device *netdev); - -/* e1000_param.c */ -void e1000_check_options(struct e1000_adapter *adapter); - - #endif /* _E1000_H_ */ diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index e39aa1fc4d1..778ede3c021 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -1,25 +1,24 @@ /******************************************************************************* - - Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. - - This program is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by the Free - Software Foundation; either version 2 of the License, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2006 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., 59 - Temple Place - Suite 330, Boston, MA 02111-1307, USA. - - The full GNU General Public License is included in this distribution in the - file called LICENSE. - + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + Contact Information: Linux NICS <linux.nics@intel.com> e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> @@ -33,6 +32,21 @@ #include <asm/uaccess.h> +extern char e1000_driver_name[]; +extern char e1000_driver_version[]; + +extern int e1000_up(struct e1000_adapter *adapter); +extern void e1000_down(struct e1000_adapter *adapter); +extern void e1000_reinit_locked(struct e1000_adapter *adapter); +extern void e1000_reset(struct e1000_adapter *adapter); +extern int e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx); +extern int e1000_setup_all_rx_resources(struct e1000_adapter *adapter); +extern int e1000_setup_all_tx_resources(struct e1000_adapter *adapter); +extern void e1000_free_all_rx_resources(struct e1000_adapter *adapter); +extern void e1000_free_all_tx_resources(struct e1000_adapter *adapter); +extern void e1000_update_stats(struct e1000_adapter *adapter); + + struct e1000_stats { char stat_string[ETH_GSTRING_LEN]; int sizeof_stat; @@ -42,26 +56,30 @@ struct e1000_stats { #define E1000_STAT(m) sizeof(((struct e1000_adapter *)0)->m), \ offsetof(struct e1000_adapter, m) static const struct e1000_stats e1000_gstrings_stats[] = { - { "rx_packets", E1000_STAT(net_stats.rx_packets) }, - { "tx_packets", E1000_STAT(net_stats.tx_packets) }, - { "rx_bytes", E1000_STAT(net_stats.rx_bytes) }, - { "tx_bytes", E1000_STAT(net_stats.tx_bytes) }, - { "rx_errors", E1000_STAT(net_stats.rx_errors) }, - { "tx_errors", E1000_STAT(net_stats.tx_errors) }, + { "rx_packets", E1000_STAT(stats.gprc) }, + { "tx_packets", E1000_STAT(stats.gptc) }, + { "rx_bytes", E1000_STAT(stats.gorcl) }, + { "tx_bytes", E1000_STAT(stats.gotcl) }, + { "rx_broadcast", E1000_STAT(stats.bprc) }, + { "tx_broadcast", E1000_STAT(stats.bptc) }, + { "rx_multicast", E1000_STAT(stats.mprc) }, + { "tx_multicast", E1000_STAT(stats.mptc) }, + { "rx_errors", E1000_STAT(stats.rxerrc) }, + { "tx_errors", E1000_STAT(stats.txerrc) }, { "tx_dropped", E1000_STAT(net_stats.tx_dropped) }, - { "multicast", E1000_STAT(net_stats.multicast) }, - { "collisions", E1000_STAT(net_stats.collisions) }, - { "rx_length_errors", E1000_STAT(net_stats.rx_length_errors) }, + { "multicast", E1000_STAT(stats.mprc) }, + { "collisions", E1000_STAT(stats.colc) }, + { "rx_length_errors", E1000_STAT(stats.rlerrc) }, { "rx_over_errors", E1000_STAT(net_stats.rx_over_errors) }, - { "rx_crc_errors", E1000_STAT(net_stats.rx_crc_errors) }, + { "rx_crc_errors", E1000_STAT(stats.crcerrs) }, { "rx_frame_errors", E1000_STAT(net_stats.rx_frame_errors) }, { "rx_no_buffer_count", E1000_STAT(stats.rnbc) }, - { "rx_missed_errors", E1000_STAT(net_stats.rx_missed_errors) }, - { "tx_aborted_errors", E1000_STAT(net_stats.tx_aborted_errors) }, - { "tx_carrier_errors", E1000_STAT(net_stats.tx_carrier_errors) }, + { "rx_missed_errors", E1000_STAT(stats.mpc) }, + { "tx_aborted_errors", E1000_STAT(stats.ecol) }, + { "tx_carrier_errors", E1000_STAT(stats.tncrs) }, { "tx_fifo_errors", E1000_STAT(net_stats.tx_fifo_errors) }, { "tx_heartbeat_errors", E1000_STAT(net_stats.tx_heartbeat_errors) }, - { "tx_window_errors", E1000_STAT(net_stats.tx_window_errors) }, + { "tx_window_errors", E1000_STAT(stats.latecol) }, { "tx_abort_late_coll", E1000_STAT(stats.latecol) }, { "tx_deferred_ok", E1000_STAT(stats.dc) }, { "tx_single_coll_ok", E1000_STAT(stats.scc) }, @@ -193,13 +211,9 @@ e1000_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) ADVERTISED_FIBRE | ADVERTISED_Autoneg; else - hw->autoneg_advertised = ADVERTISED_10baseT_Half | - ADVERTISED_10baseT_Full | - ADVERTISED_100baseT_Half | - ADVERTISED_100baseT_Full | - ADVERTISED_1000baseT_Full| - ADVERTISED_Autoneg | - ADVERTISED_TP; + hw->autoneg_advertised = ecmd->advertising | + ADVERTISED_TP | + ADVERTISED_Autoneg; ecmd->advertising = hw->autoneg_advertised; } else if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) { @@ -229,11 +243,11 @@ e1000_get_pauseparam(struct net_device *netdev, pause->autoneg = (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE); - if (hw->fc == e1000_fc_rx_pause) + if (hw->fc == E1000_FC_RX_PAUSE) pause->rx_pause = 1; - else if (hw->fc == e1000_fc_tx_pause) + else if (hw->fc == E1000_FC_TX_PAUSE) pause->tx_pause = 1; - else if (hw->fc == e1000_fc_full) { + else if (hw->fc == E1000_FC_FULL) { pause->rx_pause = 1; pause->tx_pause = 1; } @@ -253,13 +267,13 @@ e1000_set_pauseparam(struct net_device *netdev, msleep(1); if (pause->rx_pause && pause->tx_pause) - hw->fc = e1000_fc_full; + hw->fc = E1000_FC_FULL; else if (pause->rx_pause && !pause->tx_pause) - hw->fc = e1000_fc_rx_pause; + hw->fc = E1000_FC_RX_PAUSE; else if (!pause->rx_pause && pause->tx_pause) - hw->fc = e1000_fc_tx_pause; + hw->fc = E1000_FC_TX_PAUSE; else if (!pause->rx_pause && !pause->tx_pause) - hw->fc = e1000_fc_none; + hw->fc = E1000_FC_NONE; hw->original_fc = hw->fc; @@ -632,8 +646,8 @@ e1000_set_ringparam(struct net_device *netdev, { struct e1000_adapter *adapter = netdev_priv(netdev); e1000_mac_type mac_type = adapter->hw.mac_type; - struct e1000_tx_ring *txdr, *tx_old, *tx_new; - struct e1000_rx_ring *rxdr, *rx_old, *rx_new; + struct e1000_tx_ring *txdr, *tx_old; + struct e1000_rx_ring *rxdr, *rx_old; int i, err, tx_ring_size, rx_ring_size; if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) @@ -651,23 +665,17 @@ e1000_set_ringparam(struct net_device *netdev, tx_old = adapter->tx_ring; rx_old = adapter->rx_ring; - adapter->tx_ring = kmalloc(tx_ring_size, GFP_KERNEL); - if (!adapter->tx_ring) { - err = -ENOMEM; - goto err_setup_rx; - } - memset(adapter->tx_ring, 0, tx_ring_size); + err = -ENOMEM; + txdr = kzalloc(tx_ring_size, GFP_KERNEL); + if (!txdr) + goto err_alloc_tx; - adapter->rx_ring = kmalloc(rx_ring_size, GFP_KERNEL); - if (!adapter->rx_ring) { - kfree(adapter->tx_ring); - err = -ENOMEM; - goto err_setup_rx; - } - memset(adapter->rx_ring, 0, rx_ring_size); + rxdr = kzalloc(rx_ring_size, GFP_KERNEL); + if (!rxdr) + goto err_alloc_rx; - txdr = adapter->tx_ring; - rxdr = adapter->rx_ring; + adapter->tx_ring = txdr; + adapter->rx_ring = rxdr; rxdr->count = max(ring->rx_pending,(uint32_t)E1000_MIN_RXD); rxdr->count = min(rxdr->count,(uint32_t)(mac_type < e1000_82544 ? @@ -694,16 +702,14 @@ e1000_set_ringparam(struct net_device *netdev, /* save the new, restore the old in order to free it, * then restore the new back again */ - rx_new = adapter->rx_ring; - tx_new = adapter->tx_ring; adapter->rx_ring = rx_old; adapter->tx_ring = tx_old; e1000_free_all_rx_resources(adapter); e1000_free_all_tx_resources(adapter); kfree(tx_old); kfree(rx_old); - adapter->rx_ring = rx_new; - adapter->tx_ring = tx_new; + adapter->rx_ring = rxdr; + adapter->tx_ring = txdr; if ((err = e1000_up(adapter))) goto err_setup; } @@ -715,6 +721,10 @@ err_setup_tx: err_setup_rx: adapter->rx_ring = rx_old; adapter->tx_ring = tx_old; + kfree(rxdr); +err_alloc_rx: + kfree(txdr); +err_alloc_tx: e1000_up(adapter); err_setup: clear_bit(__E1000_RESETTING, &adapter->flags); @@ -1610,7 +1620,7 @@ e1000_diag_test(struct net_device *netdev, struct e1000_adapter *adapter = netdev_priv(netdev); boolean_t if_running = netif_running(netdev); - set_bit(__E1000_DRIVER_TESTING, &adapter->flags); + set_bit(__E1000_TESTING, &adapter->flags); if (eth_test->flags == ETH_TEST_FL_OFFLINE) { /* Offline tests */ @@ -1655,7 +1665,7 @@ e1000_diag_test(struct net_device *netdev, adapter->hw.autoneg = autoneg; e1000_reset(adapter); - clear_bit(__E1000_DRIVER_TESTING, &adapter->flags); + clear_bit(__E1000_TESTING, &adapter->flags); if (if_running) dev_open(netdev); } else { @@ -1670,7 +1680,7 @@ e1000_diag_test(struct net_device *netdev, data[2] = 0; data[3] = 0; - clear_bit(__E1000_DRIVER_TESTING, &adapter->flags); + clear_bit(__E1000_TESTING, &adapter->flags); } msleep_interruptible(4 * 1000); } diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 10b8c8c2532..65077f39da6 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -1,25 +1,24 @@ /******************************************************************************* - - Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. - - This program is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by the Free - Software Foundation; either version 2 of the License, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2006 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., 59 - Temple Place - Suite 330, Boston, MA 02111-1307, USA. - - The full GNU General Public License is included in this distribution in the - file called LICENSE. - + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + Contact Information: Linux NICS <linux.nics@intel.com> e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> @@ -34,6 +33,63 @@ #include "e1000_hw.h" +static int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask); +static void e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask); +static int32_t e1000_read_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *data); +static int32_t e1000_write_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t data); +static int32_t e1000_get_software_semaphore(struct e1000_hw *hw); +static void e1000_release_software_semaphore(struct e1000_hw *hw); + +static uint8_t e1000_arc_subsystem_valid(struct e1000_hw *hw); +static int32_t e1000_check_downshift(struct e1000_hw *hw); +static int32_t e1000_check_polarity(struct e1000_hw *hw, e1000_rev_polarity *polarity); +static void e1000_clear_hw_cntrs(struct e1000_hw *hw); +static void e1000_clear_vfta(struct e1000_hw *hw); +static int32_t e1000_commit_shadow_ram(struct e1000_hw *hw); +static int32_t e1000_config_dsp_after_link_change(struct e1000_hw *hw, boolean_t link_up); +static int32_t e1000_config_fc_after_link_up(struct e1000_hw *hw); +static int32_t e1000_detect_gig_phy(struct e1000_hw *hw); +static int32_t e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank); +static int32_t e1000_get_auto_rd_done(struct e1000_hw *hw); +static int32_t e1000_get_cable_length(struct e1000_hw *hw, uint16_t *min_length, uint16_t *max_length); +static int32_t e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw); +static int32_t e1000_get_phy_cfg_done(struct e1000_hw *hw); +static int32_t e1000_get_software_flag(struct e1000_hw *hw); +static int32_t e1000_ich8_cycle_init(struct e1000_hw *hw); +static int32_t e1000_ich8_flash_cycle(struct e1000_hw *hw, uint32_t timeout); +static int32_t e1000_id_led_init(struct e1000_hw *hw); +static int32_t e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, uint32_t cnf_base_addr, uint32_t cnf_size); +static int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw); +static void e1000_init_rx_addrs(struct e1000_hw *hw); +static void e1000_initialize_hardware_bits(struct e1000_hw *hw); +static boolean_t e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw); +static int32_t e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw); +static int32_t e1000_mng_enable_host_if(struct e1000_hw *hw); +static int32_t e1000_mng_host_if_write(struct e1000_hw *hw, uint8_t *buffer, uint16_t length, uint16_t offset, uint8_t *sum); +static int32_t e1000_mng_write_cmd_header(struct e1000_hw* hw, struct e1000_host_mng_command_header* hdr); +static int32_t e1000_mng_write_commit(struct e1000_hw *hw); +static int32_t e1000_phy_ife_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); +static int32_t e1000_phy_igp_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); +static int32_t e1000_read_eeprom_eerd(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data); +static int32_t e1000_write_eeprom_eewr(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data); +static int32_t e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd); +static int32_t e1000_phy_m88_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); +static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw); +static int32_t e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t *data); +static int32_t e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte); +static int32_t e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte); +static int32_t e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t *data); +static int32_t e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size, uint16_t *data); +static int32_t e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size, uint16_t data); +static int32_t e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data); +static int32_t e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data); +static void e1000_release_software_flag(struct e1000_hw *hw); +static int32_t e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active); +static int32_t e1000_set_d0_lplu_state(struct e1000_hw *hw, boolean_t active); +static int32_t e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop); +static void e1000_set_pci_express_master_disable(struct e1000_hw *hw); +static int32_t e1000_wait_autoneg(struct e1000_hw *hw); +static void e1000_write_reg_io(struct e1000_hw *hw, uint32_t offset, uint32_t value); static int32_t e1000_set_phy_type(struct e1000_hw *hw); static void e1000_phy_init_script(struct e1000_hw *hw); static int32_t e1000_setup_copper_link(struct e1000_hw *hw); @@ -70,69 +126,10 @@ static int32_t e1000_polarity_reversal_workaround(struct e1000_hw *hw); static int32_t e1000_set_phy_mode(struct e1000_hw *hw); static int32_t e1000_host_if_read_cookie(struct e1000_hw *hw, uint8_t *buffer); static uint8_t e1000_calculate_mng_checksum(char *buffer, uint32_t length); -static uint8_t e1000_arc_subsystem_valid(struct e1000_hw *hw); -static int32_t e1000_check_downshift(struct e1000_hw *hw); -static int32_t e1000_check_polarity(struct e1000_hw *hw, uint16_t *polarity); -static void e1000_clear_hw_cntrs(struct e1000_hw *hw); -static void e1000_clear_vfta(struct e1000_hw *hw); -static int32_t e1000_commit_shadow_ram(struct e1000_hw *hw); -static int32_t e1000_config_dsp_after_link_change(struct e1000_hw *hw, - boolean_t link_up); -static int32_t e1000_config_fc_after_link_up(struct e1000_hw *hw); -static int32_t e1000_detect_gig_phy(struct e1000_hw *hw); -static int32_t e1000_get_auto_rd_done(struct e1000_hw *hw); -static int32_t e1000_get_cable_length(struct e1000_hw *hw, - uint16_t *min_length, - uint16_t *max_length); -static int32_t e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw); -static int32_t e1000_get_phy_cfg_done(struct e1000_hw *hw); -static int32_t e1000_id_led_init(struct e1000_hw * hw); -static void e1000_init_rx_addrs(struct e1000_hw *hw); -static boolean_t e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw); -static int32_t e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd); -static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw); -static int32_t e1000_read_eeprom_eerd(struct e1000_hw *hw, uint16_t offset, - uint16_t words, uint16_t *data); -static int32_t e1000_set_d0_lplu_state(struct e1000_hw *hw, boolean_t active); -static int32_t e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active); -static int32_t e1000_wait_autoneg(struct e1000_hw *hw); - -static void e1000_write_reg_io(struct e1000_hw *hw, uint32_t offset, - uint32_t value); - -#define E1000_WRITE_REG_IO(a, reg, val) \ - e1000_write_reg_io((a), E1000_##reg, val) static int32_t e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, uint16_t duplex); static int32_t e1000_configure_kmrn_for_1000(struct e1000_hw *hw); -static int32_t e1000_erase_ich8_4k_segment(struct e1000_hw *hw, - uint32_t segment); -static int32_t e1000_get_software_flag(struct e1000_hw *hw); -static int32_t e1000_get_software_semaphore(struct e1000_hw *hw); -static int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw); -static int32_t e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw); -static int32_t e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, - uint16_t words, uint16_t *data); -static int32_t e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, - uint8_t* data); -static int32_t e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, - uint16_t *data); -static int32_t e1000_read_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, - uint16_t *data); -static void e1000_release_software_flag(struct e1000_hw *hw); -static void e1000_release_software_semaphore(struct e1000_hw *hw); -static int32_t e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, - uint32_t no_snoop); -static int32_t e1000_verify_write_ich8_byte(struct e1000_hw *hw, - uint32_t index, uint8_t byte); -static int32_t e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, - uint16_t words, uint16_t *data); -static int32_t e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, - uint8_t data); -static int32_t e1000_write_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, - uint16_t data); - /* IGP cable length table */ static const uint16_t e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] = @@ -156,13 +153,12 @@ uint16_t e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] = 83, 89, 95, 100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121, 124}; - /****************************************************************************** * Set the phy type member in the hw struct. * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -int32_t +static int32_t e1000_set_phy_type(struct e1000_hw *hw) { DEBUGFUNC("e1000_set_phy_type"); @@ -208,7 +204,6 @@ e1000_set_phy_type(struct e1000_hw *hw) return E1000_SUCCESS; } - /****************************************************************************** * IGP phy init script - initializes the GbE PHY * @@ -667,19 +662,12 @@ e1000_reset_hw(struct e1000_hw *hw) E1000_WRITE_FLUSH(hw); } /* fall through */ - case e1000_82571: - case e1000_82572: - case e1000_ich8lan: - case e1000_80003es2lan: + default: + /* Auto read done will delay 5ms or poll based on mac type */ ret_val = e1000_get_auto_rd_done(hw); if (ret_val) - /* We don't want to continue accessing MAC registers. */ return ret_val; break; - default: - /* Wait for EEPROM reload (it happens automatically) */ - msleep(5); - break; } /* Disable HW ARPs on ASF enabled adapters */ @@ -722,6 +710,123 @@ e1000_reset_hw(struct e1000_hw *hw) } /****************************************************************************** + * + * Initialize a number of hardware-dependent bits + * + * hw: Struct containing variables accessed by shared code + * + * This function contains hardware limitation workarounds for PCI-E adapters + * + *****************************************************************************/ +static void +e1000_initialize_hardware_bits(struct e1000_hw *hw) +{ + if ((hw->mac_type >= e1000_82571) && (!hw->initialize_hw_bits_disable)) { + /* Settings common to all PCI-express silicon */ + uint32_t reg_ctrl, reg_ctrl_ext; + uint32_t reg_tarc0, reg_tarc1; + uint32_t reg_tctl; + uint32_t reg_txdctl, reg_txdctl1; + + /* link autonegotiation/sync workarounds */ + reg_tarc0 = E1000_READ_REG(hw, TARC0); + reg_tarc0 &= ~((1 << 30)|(1 << 29)|(1 << 28)|(1 << 27)); + + /* Enable not-done TX descriptor counting */ + reg_txdctl = E1000_READ_REG(hw, TXDCTL); + reg_txdctl |= E1000_TXDCTL_COUNT_DESC; + E1000_WRITE_REG(hw, TXDCTL, reg_txdctl); + reg_txdctl1 = E1000_READ_REG(hw, TXDCTL1); + reg_txdctl1 |= E1000_TXDCTL_COUNT_DESC; + E1000_WRITE_REG(hw, TXDCTL1, reg_txdctl1); + + switch (hw->mac_type) { + case e1000_82571: + case e1000_82572: + /* Clear PHY TX compatible mode bits */ + reg_tarc1 = E1000_READ_REG(hw, TARC1); + reg_tarc1 &= ~((1 << 30)|(1 << 29)); + + /* link autonegotiation/sync workarounds */ + reg_tarc0 |= ((1 << 26)|(1 << 25)|(1 << 24)|(1 << 23)); + + /* TX ring control fixes */ + reg_tarc1 |= ((1 << 26)|(1 << 25)|(1 << 24)); + + /* Multiple read bit is reversed polarity */ + reg_tctl = E1000_READ_REG(hw, TCTL); + if (reg_tctl & E1000_TCTL_MULR) + reg_tarc1 &= ~(1 << 28); + else + reg_tarc1 |= (1 << 28); + + E1000_WRITE_REG(hw, TARC1, reg_tarc1); + break; + case e1000_82573: + reg_ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); + reg_ctrl_ext &= ~(1 << 23); + reg_ctrl_ext |= (1 << 22); + + /* TX byte count fix */ + reg_ctrl = E1000_READ_REG(hw, CTRL); + reg_ctrl &= ~(1 << 29); + + E1000_WRITE_REG(hw, CTRL_EXT, reg_ctrl_ext); + E1000_WRITE_REG(hw, CTRL, reg_ctrl); + break; + case e1000_80003es2lan: + /* improve small packet performace for fiber/serdes */ + if ((hw->media_type == e1000_media_type_fiber) || + (hw->media_type == e1000_media_type_internal_serdes)) { + reg_tarc0 &= ~(1 << 20); + } + + /* Multiple read bit is reversed polarity */ + reg_tctl = E1000_READ_REG(hw, TCTL); + reg_tarc1 = E1000_READ_REG(hw, TARC1); + if (reg_tctl & E1000_TCTL_MULR) + reg_tarc1 &= ~(1 << 28); + else + reg_tarc1 |= (1 << 28); + + E1000_WRITE_REG(hw, TARC1, reg_tarc1); + break; + case e1000_ich8lan: + /* Reduce concurrent DMA requests to 3 from 4 */ + if ((hw->revision_id < 3) || + ((hw->device_id != E1000_DEV_ID_ICH8_IGP_M_AMT) && + (hw->device_id != E1000_DEV_ID_ICH8_IGP_M))) + reg_tarc0 |= ((1 << 29)|(1 << 28)); + + reg_ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); + reg_ctrl_ext |= (1 << 22); + E1000_WRITE_REG(hw, CTRL_EXT, reg_ctrl_ext); + + /* workaround TX hang with TSO=on */ + reg_tarc0 |= ((1 << 27)|(1 << 26)|(1 << 24)|(1 << 23)); + + /* Multiple read bit is reversed polarity */ + reg_tctl = E1000_READ_REG(hw, TCTL); + reg_tarc1 = E1000_READ_REG(hw, TARC1); + if (reg_tctl & E1000_TCTL_MULR) + reg_tarc1 &= ~(1 << 28); + else + reg_tarc1 |= (1 << 28); + + /* workaround TX hang with TSO=on */ + reg_tarc1 |= ((1 << 30)|(1 << 26)|(1 << 24)); + + E1000_WRITE_REG(hw, TARC1, reg_tarc1); + break; + default: + break; + } + + E1000_WRITE_REG(hw, TARC0, reg_tarc0); + } +} + +/****************************************************************************** * Performs basic configuration of the adapter. * * hw - Struct containing variables accessed by shared code @@ -749,14 +854,13 @@ e1000_init_hw(struct e1000_hw *hw) DEBUGFUNC("e1000_init_hw"); /* force full DMA clock frequency for 10/100 on ICH8 A0-B0 */ - if (hw->mac_type == e1000_ich8lan) { - reg_data = E1000_READ_REG(hw, TARC0); - reg_data |= 0x30000000; - E1000_WRITE_REG(hw, TARC0, reg_data); - - reg_data = E1000_READ_REG(hw, STATUS); - reg_data &= ~0x80000000; - E1000_WRITE_REG(hw, STATUS, reg_data); + if ((hw->mac_type == e1000_ich8lan) && + ((hw->revision_id < 3) || + ((hw->device_id != E1000_DEV_ID_ICH8_IGP_M_AMT) && + (hw->device_id != E1000_DEV_ID_ICH8_IGP_M)))) { + reg_data = E1000_READ_REG(hw, STATUS); + reg_data &= ~0x80000000; + E1000_WRITE_REG(hw, STATUS, reg_data); } /* Initialize Identification LED */ @@ -769,6 +873,9 @@ e1000_init_hw(struct e1000_hw *hw) /* Set the media type and TBI compatibility */ e1000_set_media_type(hw); + /* Must be called after e1000_set_media_type because media_type is used */ + e1000_initialize_hardware_bits(hw); + /* Disabling VLAN filtering. */ DEBUGOUT("Initializing the IEEE VLAN\n"); /* VET hardcoded to standard value and VFTA removed in ICH8 LAN */ @@ -860,17 +967,6 @@ e1000_init_hw(struct e1000_hw *hw) if (hw->mac_type > e1000_82544) { ctrl = E1000_READ_REG(hw, TXDCTL); ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB; - switch (hw->mac_type) { - default: - break; - case e1000_82571: - case e1000_82572: - case e1000_82573: - case e1000_ich8lan: - case e1000_80003es2lan: - ctrl |= E1000_TXDCTL_COUNT_DESC; - break; - } E1000_WRITE_REG(hw, TXDCTL, ctrl); } @@ -908,8 +1004,6 @@ e1000_init_hw(struct e1000_hw *hw) case e1000_ich8lan: ctrl = E1000_READ_REG(hw, TXDCTL1); ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB; - if (hw->mac_type >= e1000_82571) - ctrl |= E1000_TXDCTL_COUNT_DESC; E1000_WRITE_REG(hw, TXDCTL1, ctrl); break; } @@ -1018,11 +1112,11 @@ e1000_setup_link(struct e1000_hw *hw) * control setting, then the variable hw->fc will * be initialized based on a value in the EEPROM. */ - if (hw->fc == e1000_fc_default) { + if (hw->fc == E1000_FC_DEFAULT) { switch (hw->mac_type) { case e1000_ich8lan: case e1000_82573: - hw->fc = e1000_fc_full; + hw->fc = E1000_FC_FULL; break; default: ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, @@ -1032,12 +1126,12 @@ e1000_setup_link(struct e1000_hw *hw) return -E1000_ERR_EEPROM; } if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0) - hw->fc = e1000_fc_none; + hw->fc = E1000_FC_NONE; else if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == EEPROM_WORD0F_ASM_DIR) - hw->fc = e1000_fc_tx_pause; + hw->fc = E1000_FC_TX_PAUSE; else - hw->fc = e1000_fc_full; + hw->fc = E1000_FC_FULL; break; } } @@ -1047,10 +1141,10 @@ e1000_setup_link(struct e1000_hw *hw) * hub or switch with different Flow Control capabilities. */ if (hw->mac_type == e1000_82542_rev2_0) - hw->fc &= (~e1000_fc_tx_pause); + hw->fc &= (~E1000_FC_TX_PAUSE); if ((hw->mac_type < e1000_82543) && (hw->report_tx_early == 1)) - hw->fc &= (~e1000_fc_rx_pause); + hw->fc &= (~E1000_FC_RX_PAUSE); hw->original_fc = hw->fc; @@ -1102,7 +1196,7 @@ e1000_setup_link(struct e1000_hw *hw) * ability to transmit pause frames in not enabled, then these * registers will be set to 0. */ - if (!(hw->fc & e1000_fc_tx_pause)) { + if (!(hw->fc & E1000_FC_TX_PAUSE)) { E1000_WRITE_REG(hw, FCRTL, 0); E1000_WRITE_REG(hw, FCRTH, 0); } else { @@ -1149,11 +1243,11 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw) if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) E1000_WRITE_REG(hw, SCTL, E1000_DISABLE_SERDES_LOOPBACK); - /* On adapters with a MAC newer than 82544, SW Defineable pin 1 will be + /* On adapters with a MAC newer than 82544, SWDP 1 will be * set when the optics detect a signal. On older adapters, it will be * cleared when there is a signal. This applies to fiber media only. - * If we're on serdes media, adjust the output amplitude to value set in - * the EEPROM. + * If we're on serdes media, adjust the output amplitude to value + * set in the EEPROM. */ ctrl = E1000_READ_REG(hw, CTRL); if (hw->media_type == e1000_media_type_fiber) @@ -1189,11 +1283,11 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw) * 3: Both Rx and TX flow control (symmetric) are enabled. */ switch (hw->fc) { - case e1000_fc_none: + case E1000_FC_NONE: /* Flow control is completely disabled by a software over-ride. */ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD); break; - case e1000_fc_rx_pause: + case E1000_FC_RX_PAUSE: /* RX Flow control is enabled and TX Flow control is disabled by a * software over-ride. Since there really isn't a way to advertise * that we are capable of RX Pause ONLY, we will advertise that we @@ -1202,13 +1296,13 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw) */ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); break; - case e1000_fc_tx_pause: + case E1000_FC_TX_PAUSE: /* TX Flow control is enabled, and RX Flow control is disabled, by a * software over-ride. */ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR); break; - case e1000_fc_full: + case E1000_FC_FULL: /* Flow control (both RX and TX) is enabled by a software over-ride. */ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); break; @@ -2124,13 +2218,13 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw) * in the EEPROM is used. */ switch (hw->fc) { - case e1000_fc_none: /* 0 */ + case E1000_FC_NONE: /* 0 */ /* Flow control (RX & TX) is completely disabled by a * software over-ride. */ mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); break; - case e1000_fc_rx_pause: /* 1 */ + case E1000_FC_RX_PAUSE: /* 1 */ /* RX Flow control is enabled, and TX Flow control is * disabled, by a software over-ride. */ @@ -2142,14 +2236,14 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw) */ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); break; - case e1000_fc_tx_pause: /* 2 */ + case E1000_FC_TX_PAUSE: /* 2 */ /* TX Flow control is enabled, and RX Flow control is * disabled, by a software over-ride. */ mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR; mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE; break; - case e1000_fc_full: /* 3 */ + case E1000_FC_FULL: /* 3 */ /* Flow control (both RX and TX) is enabled by a software * over-ride. */ @@ -2193,7 +2287,7 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw) DEBUGFUNC("e1000_phy_force_speed_duplex"); /* Turn off Flow control if we are forcing speed and duplex. */ - hw->fc = e1000_fc_none; + hw->fc = E1000_FC_NONE; DEBUGOUT1("hw->fc = %d\n", hw->fc); @@ -2547,18 +2641,18 @@ e1000_force_mac_fc(struct e1000_hw *hw) */ switch (hw->fc) { - case e1000_fc_none: + case E1000_FC_NONE: ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE)); break; - case e1000_fc_rx_pause: + case E1000_FC_RX_PAUSE: ctrl &= (~E1000_CTRL_TFCE); ctrl |= E1000_CTRL_RFCE; break; - case e1000_fc_tx_pause: + case E1000_FC_TX_PAUSE: ctrl &= (~E1000_CTRL_RFCE); ctrl |= E1000_CTRL_TFCE; break; - case e1000_fc_full: + case E1000_FC_FULL: ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE); break; default: @@ -2657,14 +2751,14 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * LOCAL DEVICE | LINK PARTNER * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution *-------|---------|-------|---------|-------------------- - * 0 | 0 | DC | DC | e1000_fc_none - * 0 | 1 | 0 | DC | e1000_fc_none - * 0 | 1 | 1 | 0 | e1000_fc_none - * 0 | 1 | 1 | 1 | e1000_fc_tx_pause - * 1 | 0 | 0 | DC | e1000_fc_none - * 1 | DC | 1 | DC | e1000_fc_full - * 1 | 1 | 0 | 0 | e1000_fc_none - * 1 | 1 | 0 | 1 | e1000_fc_rx_pause + * 0 | 0 | DC | DC | E1000_FC_NONE + * 0 | 1 | 0 | DC | E1000_FC_NONE + * 0 | 1 | 1 | 0 | E1000_FC_NONE + * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE + * 1 | 0 | 0 | DC | E1000_FC_NONE + * 1 | DC | 1 | DC | E1000_FC_FULL + * 1 | 1 | 0 | 0 | E1000_FC_NONE + * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE * */ /* Are both PAUSE bits set to 1? If so, this implies @@ -2676,7 +2770,7 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * LOCAL DEVICE | LINK PARTNER * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result *-------|---------|-------|---------|-------------------- - * 1 | DC | 1 | DC | e1000_fc_full + * 1 | DC | 1 | DC | E1000_FC_FULL * */ if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && @@ -2687,11 +2781,11 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * ONLY. Hence, we must now check to see if we need to * turn OFF the TRANSMISSION of PAUSE frames. */ - if (hw->original_fc == e1000_fc_full) { - hw->fc = e1000_fc_full; + if (hw->original_fc == E1000_FC_FULL) { + hw->fc = E1000_FC_FULL; DEBUGOUT("Flow Control = FULL.\n"); } else { - hw->fc = e1000_fc_rx_pause; + hw->fc = E1000_FC_RX_PAUSE; DEBUGOUT("Flow Control = RX PAUSE frames only.\n"); } } @@ -2700,14 +2794,14 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * LOCAL DEVICE | LINK PARTNER * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result *-------|---------|-------|---------|-------------------- - * 0 | 1 | 1 | 1 | e1000_fc_tx_pause + * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE * */ else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) && (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { - hw->fc = e1000_fc_tx_pause; + hw->fc = E1000_FC_TX_PAUSE; DEBUGOUT("Flow Control = TX PAUSE frames only.\n"); } /* For transmitting PAUSE frames ONLY. @@ -2715,14 +2809,14 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * LOCAL DEVICE | LINK PARTNER * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result *-------|---------|-------|---------|-------------------- - * 1 | 1 | 0 | 1 | e1000_fc_rx_pause + * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE * */ else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { - hw->fc = e1000_fc_rx_pause; + hw->fc = E1000_FC_RX_PAUSE; DEBUGOUT("Flow Control = RX PAUSE frames only.\n"); } /* Per the IEEE spec, at this point flow control should be @@ -2745,13 +2839,13 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * be asked to delay transmission of packets than asking * our link partner to pause transmission of frames. */ - else if ((hw->original_fc == e1000_fc_none || - hw->original_fc == e1000_fc_tx_pause) || + else if ((hw->original_fc == E1000_FC_NONE || + hw->original_fc == E1000_FC_TX_PAUSE) || hw->fc_strict_ieee) { - hw->fc = e1000_fc_none; + hw->fc = E1000_FC_NONE; DEBUGOUT("Flow Control = NONE.\n"); } else { - hw->fc = e1000_fc_rx_pause; + hw->fc = E1000_FC_RX_PAUSE; DEBUGOUT("Flow Control = RX PAUSE frames only.\n"); } @@ -2766,7 +2860,7 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) } if (duplex == HALF_DUPLEX) - hw->fc = e1000_fc_none; + hw->fc = E1000_FC_NONE; /* Now we call a subroutine to actually force the MAC * controller to use the correct flow control settings. @@ -3417,9 +3511,8 @@ e1000_read_phy_reg(struct e1000_hw *hw, return ret_val; } -int32_t -e1000_read_phy_reg_ex(struct e1000_hw *hw, - uint32_t reg_addr, +static int32_t +e1000_read_phy_reg_ex(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *phy_data) { uint32_t i; @@ -3499,8 +3592,7 @@ e1000_read_phy_reg_ex(struct e1000_hw *hw, * data - data to write to the PHY ******************************************************************************/ int32_t -e1000_write_phy_reg(struct e1000_hw *hw, - uint32_t reg_addr, +e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t phy_data) { uint32_t ret_val; @@ -3557,10 +3649,9 @@ e1000_write_phy_reg(struct e1000_hw *hw, return ret_val; } -int32_t -e1000_write_phy_reg_ex(struct e1000_hw *hw, - uint32_t reg_addr, - uint16_t phy_data) +static int32_t +e1000_write_phy_reg_ex(struct e1000_hw *hw, uint32_t reg_addr, + uint16_t phy_data) { uint32_t i; uint32_t mdic = 0; @@ -3711,7 +3802,7 @@ e1000_phy_hw_reset(struct e1000_hw *hw) swfw = E1000_SWFW_PHY0_SM; } if (e1000_swfw_sync_acquire(hw, swfw)) { - e1000_release_software_semaphore(hw); + DEBUGOUT("Unable to acquire swfw sync\n"); return -E1000_ERR_SWFW_SYNC; } /* Read the device control register and assert the E1000_CTRL_PHY_RST @@ -3734,6 +3825,7 @@ e1000_phy_hw_reset(struct e1000_hw *hw) if (hw->mac_type >= e1000_82571) mdelay(10); + e1000_swfw_sync_release(hw, swfw); } else { /* Read the Extended Device Control Register, assert the PHY_RESET_DIR @@ -3792,15 +3884,14 @@ e1000_phy_reset(struct e1000_hw *hw) if (ret_val) return E1000_SUCCESS; - switch (hw->mac_type) { - case e1000_82541_rev_2: - case e1000_82571: - case e1000_82572: - case e1000_ich8lan: + switch (hw->phy_type) { + case e1000_phy_igp: + case e1000_phy_igp_2: + case e1000_phy_igp_3: + case e1000_phy_ife: ret_val = e1000_phy_hw_reset(hw); if (ret_val) return ret_val; - break; default: ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data); @@ -3936,7 +4027,7 @@ e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code ******************************************************************************/ -int32_t +static int32_t e1000_detect_gig_phy(struct e1000_hw *hw) { int32_t phy_init_status, ret_val; @@ -3945,6 +4036,9 @@ e1000_detect_gig_phy(struct e1000_hw *hw) DEBUGFUNC("e1000_detect_gig_phy"); + if (hw->phy_id != 0) + return E1000_SUCCESS; + /* The 82571 firmware may still be configuring the PHY. In this * case, we cannot access the PHY until the configuration is done. So * we explicitly set the PHY values. */ @@ -4061,7 +4155,8 @@ e1000_phy_igp_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info) { int32_t ret_val; - uint16_t phy_data, polarity, min_length, max_length, average; + uint16_t phy_data, min_length, max_length, average; + e1000_rev_polarity polarity; DEBUGFUNC("e1000_phy_igp_get_info"); @@ -4086,8 +4181,8 @@ e1000_phy_igp_get_info(struct e1000_hw *hw, if (ret_val) return ret_val; - phy_info->mdix_mode = (phy_data & IGP01E1000_PSSR_MDIX) >> - IGP01E1000_PSSR_MDIX_SHIFT; + phy_info->mdix_mode = (e1000_auto_x_mode)((phy_data & IGP01E1000_PSSR_MDIX) >> + IGP01E1000_PSSR_MDIX_SHIFT); if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) == IGP01E1000_PSSR_SPEED_1000MBPS) { @@ -4096,10 +4191,12 @@ e1000_phy_igp_get_info(struct e1000_hw *hw, if (ret_val) return ret_val; - phy_info->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS) >> - SR_1000T_LOCAL_RX_STATUS_SHIFT; - phy_info->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS) >> - SR_1000T_REMOTE_RX_STATUS_SHIFT; + phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >> + SR_1000T_LOCAL_RX_STATUS_SHIFT) ? + e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; + phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >> + SR_1000T_REMOTE_RX_STATUS_SHIFT) ? + e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; /* Get cable length */ ret_val = e1000_get_cable_length(hw, &min_length, &max_length); @@ -4135,7 +4232,8 @@ e1000_phy_ife_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info) { int32_t ret_val; - uint16_t phy_data, polarity; + uint16_t phy_data; + e1000_rev_polarity polarity; DEBUGFUNC("e1000_phy_ife_get_info"); @@ -4146,8 +4244,9 @@ e1000_phy_ife_get_info(struct e1000_hw *hw, if (ret_val) return ret_val; phy_info->polarity_correction = - (phy_data & IFE_PSC_AUTO_POLARITY_DISABLE) >> - IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT; + ((phy_data & IFE_PSC_AUTO_POLARITY_DISABLE) >> + IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT) ? + e1000_polarity_reversal_disabled : e1000_polarity_reversal_enabled; if (phy_info->polarity_correction == e1000_polarity_reversal_enabled) { ret_val = e1000_check_polarity(hw, &polarity); @@ -4155,8 +4254,9 @@ e1000_phy_ife_get_info(struct e1000_hw *hw, return ret_val; } else { /* Polarity is forced. */ - polarity = (phy_data & IFE_PSC_FORCE_POLARITY) >> - IFE_PSC_FORCE_POLARITY_SHIFT; + polarity = ((phy_data & IFE_PSC_FORCE_POLARITY) >> + IFE_PSC_FORCE_POLARITY_SHIFT) ? + e1000_rev_polarity_reversed : e1000_rev_polarity_normal; } phy_info->cable_polarity = polarity; @@ -4164,9 +4264,9 @@ e1000_phy_ife_get_info(struct e1000_hw *hw, if (ret_val) return ret_val; - phy_info->mdix_mode = - (phy_data & (IFE_PMC_AUTO_MDIX | IFE_PMC_FORCE_MDIX)) >> - IFE_PMC_MDIX_MODE_SHIFT; + phy_info->mdix_mode = (e1000_auto_x_mode) + ((phy_data & (IFE_PMC_AUTO_MDIX | IFE_PMC_FORCE_MDIX)) >> + IFE_PMC_MDIX_MODE_SHIFT); return E1000_SUCCESS; } @@ -4182,7 +4282,8 @@ e1000_phy_m88_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info) { int32_t ret_val; - uint16_t phy_data, polarity; + uint16_t phy_data; + e1000_rev_polarity polarity; DEBUGFUNC("e1000_phy_m88_get_info"); @@ -4195,11 +4296,14 @@ e1000_phy_m88_get_info(struct e1000_hw *hw, return ret_val; phy_info->extended_10bt_distance = - (phy_data & M88E1000_PSCR_10BT_EXT_DIST_ENABLE) >> - M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT; + ((phy_data & M88E1000_PSCR_10BT_EXT_DIST_ENABLE) >> + M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT) ? + e1000_10bt_ext_dist_enable_lower : e1000_10bt_ext_dist_enable_normal; + phy_info->polarity_correction = - (phy_data & M88E1000_PSCR_POLARITY_REVERSAL) >> - M88E1000_PSCR_POLARITY_REVERSAL_SHIFT; + ((phy_data & M88E1000_PSCR_POLARITY_REVERSAL) >> + M88E1000_PSCR_POLARITY_REVERSAL_SHIFT) ? + e1000_polarity_reversal_disabled : e1000_polarity_reversal_enabled; /* Check polarity status */ ret_val = e1000_check_polarity(hw, &polarity); @@ -4211,15 +4315,15 @@ e1000_phy_m88_get_info(struct e1000_hw *hw, if (ret_val) return ret_val; - phy_info->mdix_mode = (phy_data & M88E1000_PSSR_MDIX) >> - M88E1000_PSSR_MDIX_SHIFT; + phy_info->mdix_mode = (e1000_auto_x_mode)((phy_data & M88E1000_PSSR_MDIX) >> + M88E1000_PSSR_MDIX_SHIFT); if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) { /* Cable Length Estimation and Local/Remote Receiver Information * are only valid at 1000 Mbps. */ if (hw->phy_type != e1000_phy_gg82563) { - phy_info->cable_length = ((phy_data & M88E1000_PSSR_CABLE_LENGTH) >> + phy_info->cable_length = (e1000_cable_length)((phy_data & M88E1000_PSSR_CABLE_LENGTH) >> M88E1000_PSSR_CABLE_LENGTH_SHIFT); } else { ret_val = e1000_read_phy_reg(hw, GG82563_PHY_DSP_DISTANCE, @@ -4227,18 +4331,20 @@ e1000_phy_m88_get_info(struct e1000_hw *hw, if (ret_val) return ret_val; - phy_info->cable_length = phy_data & GG82563_DSPD_CABLE_LENGTH; + phy_info->cable_length = (e1000_cable_length)(phy_data & GG82563_DSPD_CABLE_LENGTH); } ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data); if (ret_val) return ret_val; - phy_info->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS) >> - SR_1000T_LOCAL_RX_STATUS_SHIFT; + phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >> + SR_1000T_LOCAL_RX_STATUS_SHIFT) ? + e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; + phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >> + SR_1000T_REMOTE_RX_STATUS_SHIFT) ? + e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; - phy_info->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS) >> - SR_1000T_REMOTE_RX_STATUS_SHIFT; } return E1000_SUCCESS; @@ -4441,7 +4547,7 @@ e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->use_eewr = FALSE; break; case e1000_ich8lan: - { + { int32_t i = 0; uint32_t flash_size = E1000_READ_ICH8_REG(hw, ICH8_FLASH_GFPREG); @@ -4468,7 +4574,7 @@ e1000_init_eeprom_params(struct e1000_hw *hw) hw->flash_bank_size /= 2 * sizeof(uint16_t); break; - } + } default: break; } @@ -4800,7 +4906,7 @@ e1000_release_eeprom(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -int32_t +static int32_t e1000_spi_eeprom_ready(struct e1000_hw *hw) { uint16_t retry_count = 0; @@ -4854,44 +4960,43 @@ e1000_read_eeprom(struct e1000_hw *hw, { struct e1000_eeprom_info *eeprom = &hw->eeprom; uint32_t i = 0; - int32_t ret_val; DEBUGFUNC("e1000_read_eeprom"); + /* If eeprom is not yet detected, do so now */ + if (eeprom->word_size == 0) + e1000_init_eeprom_params(hw); + /* A check for invalid values: offset too large, too many words, and not * enough words. */ if ((offset >= eeprom->word_size) || (words > eeprom->word_size - offset) || (words == 0)) { - DEBUGOUT("\"words\" parameter out of bounds\n"); + DEBUGOUT2("\"words\" parameter out of bounds. Words = %d, size = %d\n", offset, eeprom->word_size); return -E1000_ERR_EEPROM; } - /* FLASH reads without acquiring the semaphore are safe */ + /* EEPROM's that don't use EERD to read require us to bit-bang the SPI + * directly. In this case, we need to acquire the EEPROM so that + * FW or other port software does not interrupt. + */ if (e1000_is_onboard_nvm_eeprom(hw) == TRUE && hw->eeprom.use_eerd == FALSE) { - switch (hw->mac_type) { - case e1000_80003es2lan: - break; - default: - /* Prepare the EEPROM for reading */ - if (e1000_acquire_eeprom(hw) != E1000_SUCCESS) - return -E1000_ERR_EEPROM; - break; - } + /* Prepare the EEPROM for bit-bang reading */ + if (e1000_acquire_eeprom(hw) != E1000_SUCCESS) + return -E1000_ERR_EEPROM; } - if (eeprom->use_eerd == TRUE) { - ret_val = e1000_read_eeprom_eerd(hw, offset, words, data); - if ((e1000_is_onboard_nvm_eeprom(hw) == TRUE) || - (hw->mac_type != e1000_82573)) - e1000_release_eeprom(hw); - return ret_val; - } + /* Eerd register EEPROM access requires no eeprom aquire/release */ + if (eeprom->use_eerd == TRUE) + return e1000_read_eeprom_eerd(hw, offset, words, data); + /* ICH EEPROM access is done via the ICH flash controller */ if (eeprom->type == e1000_eeprom_ich8) return e1000_read_eeprom_ich8(hw, offset, words, data); + /* Set up the SPI or Microwire EEPROM for bit-bang reading. We have + * acquired the EEPROM at this point, so any returns should relase it */ if (eeprom->type == e1000_eeprom_spi) { uint16_t word_in; uint8_t read_opcode = EEPROM_READ_OPCODE_SPI; @@ -5206,6 +5311,10 @@ e1000_write_eeprom(struct e1000_hw *hw, DEBUGFUNC("e1000_write_eeprom"); + /* If eeprom is not yet detected, do so now */ + if (eeprom->word_size == 0) + e1000_init_eeprom_params(hw); + /* A check for invalid values: offset too large, too many words, and not * enough words. */ @@ -5248,7 +5357,7 @@ e1000_write_eeprom(struct e1000_hw *hw, * data - pointer to array of 8 bit words to be written to the EEPROM * *****************************************************************************/ -int32_t +static int32_t e1000_write_eeprom_spi(struct e1000_hw *hw, uint16_t offset, uint16_t words, @@ -5314,7 +5423,7 @@ e1000_write_eeprom_spi(struct e1000_hw *hw, * data - pointer to array of 16 bit words to be written to the EEPROM * *****************************************************************************/ -int32_t +static int32_t e1000_write_eeprom_microwire(struct e1000_hw *hw, uint16_t offset, uint16_t words, @@ -5411,10 +5520,8 @@ e1000_commit_shadow_ram(struct e1000_hw *hw) int32_t error = E1000_SUCCESS; uint32_t old_bank_offset = 0; uint32_t new_bank_offset = 0; - uint32_t sector_retries = 0; uint8_t low_byte = 0; uint8_t high_byte = 0; - uint8_t temp_byte = 0; boolean_t sector_write_failed = FALSE; if (hw->mac_type == e1000_82573) { @@ -5467,41 +5574,46 @@ e1000_commit_shadow_ram(struct e1000_hw *hw) e1000_erase_ich8_4k_segment(hw, 0); } - do { - sector_write_failed = FALSE; - /* Loop for every byte in the shadow RAM, - * which is in units of words. */ - for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) { - /* Determine whether to write the value stored - * in the other NVM bank or a modified value stored - * in the shadow RAM */ - if (hw->eeprom_shadow_ram[i].modified == TRUE) { - low_byte = (uint8_t)hw->eeprom_shadow_ram[i].eeprom_word; - e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset, - &temp_byte); - udelay(100); - error = e1000_verify_write_ich8_byte(hw, - (i << 1) + new_bank_offset, - low_byte); - if (error != E1000_SUCCESS) - sector_write_failed = TRUE; + sector_write_failed = FALSE; + /* Loop for every byte in the shadow RAM, + * which is in units of words. */ + for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) { + /* Determine whether to write the value stored + * in the other NVM bank or a modified value stored + * in the shadow RAM */ + if (hw->eeprom_shadow_ram[i].modified == TRUE) { + low_byte = (uint8_t)hw->eeprom_shadow_ram[i].eeprom_word; + udelay(100); + error = e1000_verify_write_ich8_byte(hw, + (i << 1) + new_bank_offset, low_byte); + + if (error != E1000_SUCCESS) + sector_write_failed = TRUE; + else { high_byte = (uint8_t)(hw->eeprom_shadow_ram[i].eeprom_word >> 8); - e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset + 1, - &temp_byte); - udelay(100); - } else { - e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset, - &low_byte); udelay(100); - error = e1000_verify_write_ich8_byte(hw, - (i << 1) + new_bank_offset, low_byte); - if (error != E1000_SUCCESS) - sector_write_failed = TRUE; + } + } else { + e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset, + &low_byte); + udelay(100); + error = e1000_verify_write_ich8_byte(hw, + (i << 1) + new_bank_offset, low_byte); + + if (error != E1000_SUCCESS) + sector_write_failed = TRUE; + else { e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset + 1, &high_byte); + udelay(100); } + } + /* If the write of the low byte was successful, go ahread and + * write the high byte while checking to make sure that if it + * is the signature byte, then it is handled properly */ + if (sector_write_failed == FALSE) { /* If the word is 0x13, then make sure the signature bits * (15:14) are 11b until the commit has completed. * This will allow us to write 10b which indicates the @@ -5512,45 +5624,45 @@ e1000_commit_shadow_ram(struct e1000_hw *hw) high_byte = E1000_ICH8_NVM_SIG_MASK | high_byte; error = e1000_verify_write_ich8_byte(hw, - (i << 1) + new_bank_offset + 1, high_byte); + (i << 1) + new_bank_offset + 1, high_byte); if (error != E1000_SUCCESS) sector_write_failed = TRUE; - if (sector_write_failed == FALSE) { - /* Clear the now not used entry in the cache */ - hw->eeprom_shadow_ram[i].modified = FALSE; - hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF; - } + } else { + /* If the write failed then break from the loop and + * return an error */ + break; } + } - /* Don't bother writing the segment valid bits if sector - * programming failed. */ - if (sector_write_failed == FALSE) { - /* Finally validate the new segment by setting bit 15:14 - * to 10b in word 0x13 , this can be done without an - * erase as well since these bits are 11 to start with - * and we need to change bit 14 to 0b */ - e1000_read_ich8_byte(hw, - E1000_ICH8_NVM_SIG_WORD * 2 + 1 + new_bank_offset, - &high_byte); - high_byte &= 0xBF; + /* Don't bother writing the segment valid bits if sector + * programming failed. */ + if (sector_write_failed == FALSE) { + /* Finally validate the new segment by setting bit 15:14 + * to 10b in word 0x13 , this can be done without an + * erase as well since these bits are 11 to start with + * and we need to change bit 14 to 0b */ + e1000_read_ich8_byte(hw, + E1000_ICH8_NVM_SIG_WORD * 2 + 1 + new_bank_offset, + &high_byte); + high_byte &= 0xBF; + error = e1000_verify_write_ich8_byte(hw, + E1000_ICH8_NVM_SIG_WORD * 2 + 1 + new_bank_offset, high_byte); + /* And invalidate the previously valid segment by setting + * its signature word (0x13) high_byte to 0b. This can be + * done without an erase because flash erase sets all bits + * to 1's. We can write 1's to 0's without an erase */ + if (error == E1000_SUCCESS) { error = e1000_verify_write_ich8_byte(hw, - E1000_ICH8_NVM_SIG_WORD * 2 + 1 + new_bank_offset, - high_byte); - if (error != E1000_SUCCESS) - sector_write_failed = TRUE; + E1000_ICH8_NVM_SIG_WORD * 2 + 1 + old_bank_offset, 0); + } - /* And invalidate the previously valid segment by setting - * its signature word (0x13) high_byte to 0b. This can be - * done without an erase because flash erase sets all bits - * to 1's. We can write 1's to 0's without an erase */ - error = e1000_verify_write_ich8_byte(hw, - E1000_ICH8_NVM_SIG_WORD * 2 + 1 + old_bank_offset, - 0); - if (error != E1000_SUCCESS) - sector_write_failed = TRUE; + /* Clear the now not used entry in the cache */ + for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) { + hw->eeprom_shadow_ram[i].modified = FALSE; + hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF; } - } while (++sector_retries < 10 && sector_write_failed == TRUE); + } } return error; @@ -5640,99 +5752,6 @@ e1000_init_rx_addrs(struct e1000_hw *hw) } /****************************************************************************** - * Updates the MAC's list of multicast addresses. - * - * hw - Struct containing variables accessed by shared code - * mc_addr_list - the list of new multicast addresses - * mc_addr_count - number of addresses - * pad - number of bytes between addresses in the list - * rar_used_count - offset where to start adding mc addresses into the RAR's - * - * The given list replaces any existing list. Clears the last 15 receive - * address registers and the multicast table. Uses receive address registers - * for the first 15 multicast addresses, and hashes the rest into the - * multicast table. - *****************************************************************************/ -#if 0 -void -e1000_mc_addr_list_update(struct e1000_hw *hw, - uint8_t *mc_addr_list, - uint32_t mc_addr_count, - uint32_t pad, - uint32_t rar_used_count) -{ - uint32_t hash_value; - uint32_t i; - uint32_t num_rar_entry; - uint32_t num_mta_entry; - - DEBUGFUNC("e1000_mc_addr_list_update"); - - /* Set the new number of MC addresses that we are being requested to use. */ - hw->num_mc_addrs = mc_addr_count; - - /* Clear RAR[1-15] */ - DEBUGOUT(" Clearing RAR[1-15]\n"); - num_rar_entry = E1000_RAR_ENTRIES; - if (hw->mac_type == e1000_ich8lan) - num_rar_entry = E1000_RAR_ENTRIES_ICH8LAN; - /* Reserve a spot for the Locally Administered Address to work around - * an 82571 issue in which a reset on one port will reload the MAC on - * the other port. */ - if ((hw->mac_type == e1000_82571) && (hw->laa_is_present == TRUE)) - num_rar_entry -= 1; - - for (i = rar_used_count; i < num_rar_entry; i++) { - E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0); - E1000_WRITE_FLUSH(hw); - E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0); - E1000_WRITE_FLUSH(hw); - } - - /* Clear the MTA */ - DEBUGOUT(" Clearing MTA\n"); - num_mta_entry = E1000_NUM_MTA_REGISTERS; - if (hw->mac_type == e1000_ich8lan) - num_mta_entry = E1000_NUM_MTA_REGISTERS_ICH8LAN; - for (i = 0; i < num_mta_entry; i++) { - E1000_WRITE_REG_ARRAY(hw, MTA, i, 0); - E1000_WRITE_FLUSH(hw); - } - - /* Add the new addresses */ - for (i = 0; i < mc_addr_count; i++) { - DEBUGOUT(" Adding the multicast addresses:\n"); - DEBUGOUT7(" MC Addr #%d =%.2X %.2X %.2X %.2X %.2X %.2X\n", i, - mc_addr_list[i * (ETH_LENGTH_OF_ADDRESS + pad)], - mc_addr_list[i * (ETH_LENGTH_OF_ADDRESS + pad) + 1], - mc_addr_list[i * (ETH_LENGTH_OF_ADDRESS + pad) + 2], - mc_addr_list[i * (ETH_LENGTH_OF_ADDRESS + pad) + 3], - mc_addr_list[i * (ETH_LENGTH_OF_ADDRESS + pad) + 4], - mc_addr_list[i * (ETH_LENGTH_OF_ADDRESS + pad) + 5]); - - hash_value = e1000_hash_mc_addr(hw, - mc_addr_list + - (i * (ETH_LENGTH_OF_ADDRESS + pad))); - - DEBUGOUT1(" Hash value = 0x%03X\n", hash_value); - - /* Place this multicast address in the RAR if there is room, * - * else put it in the MTA - */ - if (rar_used_count < num_rar_entry) { - e1000_rar_set(hw, - mc_addr_list + (i * (ETH_LENGTH_OF_ADDRESS + pad)), - rar_used_count); - rar_used_count++; - } else { - e1000_mta_set(hw, hash_value); - } - } - DEBUGOUT("MC Update Complete\n"); -} -#endif /* 0 */ - -/****************************************************************************** * Hashes an address to determine its location in the multicast table * * hw - Struct containing variables accessed by shared code @@ -6290,7 +6309,7 @@ e1000_led_off(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -void +static void e1000_clear_hw_cntrs(struct e1000_hw *hw) { volatile uint32_t temp; @@ -6539,6 +6558,8 @@ e1000_tbi_adjust_stats(struct e1000_hw *hw, void e1000_get_bus_info(struct e1000_hw *hw) { + int32_t ret_val; + uint16_t pci_ex_link_status; uint32_t status; switch (hw->mac_type) { @@ -6548,18 +6569,25 @@ e1000_get_bus_info(struct e1000_hw *hw) hw->bus_speed = e1000_bus_speed_unknown; hw->bus_width = e1000_bus_width_unknown; break; + case e1000_82571: case e1000_82572: case e1000_82573: + case e1000_80003es2lan: hw->bus_type = e1000_bus_type_pci_express; hw->bus_speed = e1000_bus_speed_2500; - hw->bus_width = e1000_bus_width_pciex_1; + ret_val = e1000_read_pcie_cap_reg(hw, + PCI_EX_LINK_STATUS, + &pci_ex_link_status); + if (ret_val) + hw->bus_width = e1000_bus_width_unknown; + else + hw->bus_width = (pci_ex_link_status & PCI_EX_LINK_WIDTH_MASK) >> + PCI_EX_LINK_WIDTH_SHIFT; break; - case e1000_82571: case e1000_ich8lan: - case e1000_80003es2lan: hw->bus_type = e1000_bus_type_pci_express; hw->bus_speed = e1000_bus_speed_2500; - hw->bus_width = e1000_bus_width_pciex_4; + hw->bus_width = e1000_bus_width_pciex_1; break; default: status = E1000_READ_REG(hw, STATUS); @@ -6593,25 +6621,6 @@ e1000_get_bus_info(struct e1000_hw *hw) break; } } -/****************************************************************************** - * Reads a value from one of the devices registers using port I/O (as opposed - * memory mapped I/O). Only 82544 and newer devices support port I/O. - * - * hw - Struct containing variables accessed by shared code - * offset - offset to read from - *****************************************************************************/ -#if 0 -uint32_t -e1000_read_reg_io(struct e1000_hw *hw, - uint32_t offset) -{ - unsigned long io_addr = hw->io_base; - unsigned long io_data = hw->io_base + 4; - - e1000_io_write(hw, io_addr, offset); - return e1000_io_read(hw, io_data); -} -#endif /* 0 */ /****************************************************************************** * Writes a value to one of the devices registers using port I/O (as opposed to @@ -6633,7 +6642,6 @@ e1000_write_reg_io(struct e1000_hw *hw, e1000_io_write(hw, io_data, value); } - /****************************************************************************** * Estimates the cable length. * @@ -6842,7 +6850,7 @@ e1000_get_cable_length(struct e1000_hw *hw, *****************************************************************************/ static int32_t e1000_check_polarity(struct e1000_hw *hw, - uint16_t *polarity) + e1000_rev_polarity *polarity) { int32_t ret_val; uint16_t phy_data; @@ -6856,8 +6864,10 @@ e1000_check_polarity(struct e1000_hw *hw, &phy_data); if (ret_val) return ret_val; - *polarity = (phy_data & M88E1000_PSSR_REV_POLARITY) >> - M88E1000_PSSR_REV_POLARITY_SHIFT; + *polarity = ((phy_data & M88E1000_PSSR_REV_POLARITY) >> + M88E1000_PSSR_REV_POLARITY_SHIFT) ? + e1000_rev_polarity_reversed : e1000_rev_polarity_normal; + } else if (hw->phy_type == e1000_phy_igp || hw->phy_type == e1000_phy_igp_3 || hw->phy_type == e1000_phy_igp_2) { @@ -6879,19 +6889,22 @@ e1000_check_polarity(struct e1000_hw *hw, return ret_val; /* Check the polarity bits */ - *polarity = (phy_data & IGP01E1000_PHY_POLARITY_MASK) ? 1 : 0; + *polarity = (phy_data & IGP01E1000_PHY_POLARITY_MASK) ? + e1000_rev_polarity_reversed : e1000_rev_polarity_normal; } else { /* For 10 Mbps, read the polarity bit in the status register. (for * 100 Mbps this bit is always 0) */ - *polarity = phy_data & IGP01E1000_PSSR_POLARITY_REVERSED; + *polarity = (phy_data & IGP01E1000_PSSR_POLARITY_REVERSED) ? + e1000_rev_polarity_reversed : e1000_rev_polarity_normal; } } else if (hw->phy_type == e1000_phy_ife) { ret_val = e1000_read_phy_reg(hw, IFE_PHY_EXTENDED_STATUS_CONTROL, &phy_data); if (ret_val) return ret_val; - *polarity = (phy_data & IFE_PESC_POLARITY_REVERSED) >> - IFE_PESC_POLARITY_REVERSED_SHIFT; + *polarity = ((phy_data & IFE_PESC_POLARITY_REVERSED) >> + IFE_PESC_POLARITY_REVERSED_SHIFT) ? + e1000_rev_polarity_reversed : e1000_rev_polarity_normal; } return E1000_SUCCESS; } @@ -7259,7 +7272,7 @@ e1000_set_d3_lplu_state(struct e1000_hw *hw, } else if (hw->smart_speed == e1000_smart_speed_off) { ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data); - if (ret_val) + if (ret_val) return ret_val; phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; @@ -7369,7 +7382,7 @@ e1000_set_d0_lplu_state(struct e1000_hw *hw, } else if (hw->smart_speed == e1000_smart_speed_off) { ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data); - if (ret_val) + if (ret_val) return ret_val; phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; @@ -7475,7 +7488,7 @@ e1000_set_vco_speed(struct e1000_hw *hw) * * returns: - E1000_SUCCESS . ****************************************************************************/ -int32_t +static int32_t e1000_host_if_read_cookie(struct e1000_hw * hw, uint8_t *buffer) { uint8_t i; @@ -7686,7 +7699,7 @@ e1000_check_mng_mode(struct e1000_hw *hw) ****************************************************************************/ int32_t e1000_mng_write_dhcp_info(struct e1000_hw * hw, uint8_t *buffer, - uint16_t length) + uint16_t length) { int32_t ret_val; struct e1000_host_mng_command_header hdr; @@ -7716,7 +7729,7 @@ e1000_mng_write_dhcp_info(struct e1000_hw * hw, uint8_t *buffer, * * returns - checksum of buffer contents. ****************************************************************************/ -uint8_t +static uint8_t e1000_calculate_mng_checksum(char *buffer, uint32_t length) { uint8_t sum = 0; @@ -7914,32 +7927,6 @@ e1000_set_pci_express_master_disable(struct e1000_hw *hw) E1000_WRITE_REG(hw, CTRL, ctrl); } -/*************************************************************************** - * - * Enables PCI-Express master access. - * - * hw: Struct containing variables accessed by shared code - * - * returns: - none. - * - ***************************************************************************/ -#if 0 -void -e1000_enable_pciex_master(struct e1000_hw *hw) -{ - uint32_t ctrl; - - DEBUGFUNC("e1000_enable_pciex_master"); - - if (hw->bus_type != e1000_bus_type_pci_express) - return; - - ctrl = E1000_READ_REG(hw, CTRL); - ctrl &= ~E1000_CTRL_GIO_MASTER_DISABLE; - E1000_WRITE_REG(hw, CTRL, ctrl); -} -#endif /* 0 */ - /******************************************************************************* * * Disables PCI-Express master access and verifies there are no pending requests @@ -8063,7 +8050,6 @@ e1000_get_phy_cfg_done(struct e1000_hw *hw) msleep(1); timeout--; } - if (!timeout) { DEBUGOUT("MNG configuration cycle has not completed.\n"); return -E1000_ERR_RESET; @@ -8172,8 +8158,9 @@ e1000_get_software_semaphore(struct e1000_hw *hw) DEBUGFUNC("e1000_get_software_semaphore"); - if (hw->mac_type != e1000_80003es2lan) + if (hw->mac_type != e1000_80003es2lan) { return E1000_SUCCESS; + } while (timeout) { swsm = E1000_READ_REG(hw, SWSM); @@ -8206,8 +8193,9 @@ e1000_release_software_semaphore(struct e1000_hw *hw) DEBUGFUNC("e1000_release_software_semaphore"); - if (hw->mac_type != e1000_80003es2lan) + if (hw->mac_type != e1000_80003es2lan) { return; + } swsm = E1000_READ_REG(hw, SWSM); /* Release the SW semaphores.*/ @@ -8241,7 +8229,7 @@ e1000_check_phy_reset_block(struct e1000_hw *hw) if (hw->mac_type > e1000_82547_rev_2) manc = E1000_READ_REG(hw, MANC); return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ? - E1000_BLK_PHY_RESET : E1000_SUCCESS; + E1000_BLK_PHY_RESET : E1000_SUCCESS; } static uint8_t @@ -8377,66 +8365,6 @@ e1000_release_software_flag(struct e1000_hw *hw) return; } -/*************************************************************************** - * - * Disable dynamic power down mode in ife PHY. - * It can be used to workaround band-gap problem. - * - * hw: Struct containing variables accessed by shared code - * - ***************************************************************************/ -#if 0 -int32_t -e1000_ife_disable_dynamic_power_down(struct e1000_hw *hw) -{ - uint16_t phy_data; - int32_t ret_val = E1000_SUCCESS; - - DEBUGFUNC("e1000_ife_disable_dynamic_power_down"); - - if (hw->phy_type == e1000_phy_ife) { - ret_val = e1000_read_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, &phy_data); - if (ret_val) - return ret_val; - - phy_data |= IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN; - ret_val = e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, phy_data); - } - - return ret_val; -} -#endif /* 0 */ - -/*************************************************************************** - * - * Enable dynamic power down mode in ife PHY. - * It can be used to workaround band-gap problem. - * - * hw: Struct containing variables accessed by shared code - * - ***************************************************************************/ -#if 0 -int32_t -e1000_ife_enable_dynamic_power_down(struct e1000_hw *hw) -{ - uint16_t phy_data; - int32_t ret_val = E1000_SUCCESS; - - DEBUGFUNC("e1000_ife_enable_dynamic_power_down"); - - if (hw->phy_type == e1000_phy_ife) { - ret_val = e1000_read_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, &phy_data); - if (ret_val) - return ret_val; - - phy_data &= ~IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN; - ret_val = e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, phy_data); - } - - return ret_val; -} -#endif /* 0 */ - /****************************************************************************** * Reads a 16 bit word or words from the EEPROM using the ICH8's flash access * register. @@ -8832,20 +8760,22 @@ static int32_t e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte) { int32_t error = E1000_SUCCESS; - int32_t program_retries; - uint8_t temp_byte; + int32_t program_retries = 0; - e1000_write_ich8_byte(hw, index, byte); - udelay(100); + DEBUGOUT2("Byte := %2.2X Offset := %d\n", byte, index); - for (program_retries = 0; program_retries < 100; program_retries++) { - e1000_read_ich8_byte(hw, index, &temp_byte); - if (temp_byte == byte) - break; - udelay(10); - e1000_write_ich8_byte(hw, index, byte); - udelay(100); + error = e1000_write_ich8_byte(hw, index, byte); + + if (error != E1000_SUCCESS) { + for (program_retries = 0; program_retries < 100; program_retries++) { + DEBUGOUT2("Retrying \t Byte := %2.2X Offset := %d\n", byte, index); + error = e1000_write_ich8_byte(hw, index, byte); + udelay(100); + if (error == E1000_SUCCESS) + break; + } } + if (program_retries == 100) error = E1000_ERR_EEPROM; @@ -8886,39 +8816,27 @@ e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t *data) } /****************************************************************************** - * Writes a word to the NVM using the ICH8 flash access registers. + * Erases the bank specified. Each bank may be a 4, 8 or 64k block. Banks are 0 + * based. * * hw - pointer to e1000_hw structure - * index - The starting byte index of the word to read. - * data - The word to write to the NVM. - *****************************************************************************/ -#if 0 -int32_t -e1000_write_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t data) -{ - int32_t status = E1000_SUCCESS; - status = e1000_write_ich8_data(hw, index, 2, data); - return status; -} -#endif /* 0 */ - -/****************************************************************************** - * Erases the bank specified. Each bank is a 4k block. Segments are 0 based. - * segment N is 4096 * N + flash_reg_addr. + * bank - 0 for first bank, 1 for second bank * - * hw - pointer to e1000_hw structure - * segment - 0 for first segment, 1 for second segment, etc. + * Note that this function may actually erase as much as 8 or 64 KBytes. The + * amount of NVM used in each bank is a *minimum* of 4 KBytes, but in fact the + * bank size may be 4, 8 or 64 KBytes *****************************************************************************/ -static int32_t -e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment) +int32_t +e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank) { union ich8_hws_flash_status hsfsts; union ich8_hws_flash_ctrl hsflctl; uint32_t flash_linear_address; int32_t count = 0; int32_t error = E1000_ERR_EEPROM; - int32_t iteration, seg_size; - int32_t sector_size; + int32_t iteration; + int32_t sub_sector_size = 0; + int32_t bank_size; int32_t j = 0; int32_t error_flag = 0; @@ -8927,22 +8845,27 @@ e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment) /* Determine HW Sector size: Read BERASE bits of Hw flash Status register */ /* 00: The Hw sector is 256 bytes, hence we need to erase 16 * consecutive sectors. The start index for the nth Hw sector can be - * calculated as = segment * 4096 + n * 256 + * calculated as bank * 4096 + n * 256 * 01: The Hw sector is 4K bytes, hence we need to erase 1 sector. * The start index for the nth Hw sector can be calculated - * as = segment * 4096 - * 10: Error condition - * 11: The Hw sector size is much bigger than the size asked to - * erase...error condition */ + * as bank * 4096 + * 10: The HW sector is 8K bytes + * 11: The Hw sector size is 64K bytes */ if (hsfsts.hsf_status.berasesz == 0x0) { /* Hw sector size 256 */ - sector_size = seg_size = ICH8_FLASH_SEG_SIZE_256; + sub_sector_size = ICH8_FLASH_SEG_SIZE_256; + bank_size = ICH8_FLASH_SECTOR_SIZE; iteration = ICH8_FLASH_SECTOR_SIZE / ICH8_FLASH_SEG_SIZE_256; } else if (hsfsts.hsf_status.berasesz == 0x1) { - sector_size = seg_size = ICH8_FLASH_SEG_SIZE_4K; + bank_size = ICH8_FLASH_SEG_SIZE_4K; + iteration = 1; + } else if (hw->mac_type != e1000_ich8lan && + hsfsts.hsf_status.berasesz == 0x2) { + /* 8K erase size invalid for ICH8 - added in for ICH9 */ + bank_size = ICH9_FLASH_SEG_SIZE_8K; iteration = 1; } else if (hsfsts.hsf_status.berasesz == 0x3) { - sector_size = seg_size = ICH8_FLASH_SEG_SIZE_64K; + bank_size = ICH8_FLASH_SEG_SIZE_64K; iteration = 1; } else { return error; @@ -8966,16 +8889,15 @@ e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment) /* Write the last 24 bits of an index within the block into Flash * Linear address field in Flash Address. This probably needs to - * be calculated here based off the on-chip segment size and the - * software segment size assumed (4K) */ - /* TBD */ - flash_linear_address = segment * sector_size + j * seg_size; - flash_linear_address &= ICH8_FLASH_LINEAR_ADDR_MASK; + * be calculated here based off the on-chip erase sector size and + * the software bank size (4, 8 or 64 KBytes) */ + flash_linear_address = bank * bank_size + j * sub_sector_size; flash_linear_address += hw->flash_base_addr; + flash_linear_address &= ICH8_FLASH_LINEAR_ADDR_MASK; E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FADDR, flash_linear_address); - error = e1000_ich8_flash_cycle(hw, 1000000); + error = e1000_ich8_flash_cycle(hw, ICH8_FLASH_ERASE_TIMEOUT); /* Check if FCERR is set to 1. If 1, clear it and try the whole * sequence a few more times else Done */ if (error == E1000_SUCCESS) { @@ -8999,44 +8921,6 @@ e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment) return error; } -/****************************************************************************** - * - * Reverse duplex setting without breaking the link. - * - * hw: Struct containing variables accessed by shared code - * - *****************************************************************************/ -#if 0 -int32_t -e1000_duplex_reversal(struct e1000_hw *hw) -{ - int32_t ret_val; - uint16_t phy_data; - - if (hw->phy_type != e1000_phy_igp_3) - return E1000_SUCCESS; - - ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data); - if (ret_val) - return ret_val; - - phy_data ^= MII_CR_FULL_DUPLEX; - - ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data); - if (ret_val) - return ret_val; - - ret_val = e1000_read_phy_reg(hw, IGP3E1000_PHY_MISC_CTRL, &phy_data); - if (ret_val) - return ret_val; - - phy_data |= IGP3_PHY_MISC_DUPLEX_MANUAL_SET; - ret_val = e1000_write_phy_reg(hw, IGP3E1000_PHY_MISC_CTRL, phy_data); - - return ret_val; -} -#endif /* 0 */ - static int32_t e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, uint32_t cnf_base_addr, uint32_t cnf_size) @@ -9071,6 +8955,14 @@ e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, } +/****************************************************************************** + * This function initializes the PHY from the NVM on ICH8 platforms. This + * is needed due to an issue where the NVM configuration is not properly + * autoloaded after power transitions. Therefore, after each PHY reset, we + * will load the configuration data out of the NVM manually. + * + * hw: Struct containing variables accessed by shared code + *****************************************************************************/ static int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw) { diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index a170e96251f..112447fd8bf 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -1,25 +1,24 @@ /******************************************************************************* - - Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. - - This program is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by the Free - Software Foundation; either version 2 of the License, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2006 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., 59 - Temple Place - Suite 330, Boston, MA 02111-1307, USA. - - The full GNU General Public License is included in this distribution in the - file called LICENSE. - + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + Contact Information: Linux NICS <linux.nics@intel.com> e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> @@ -93,11 +92,11 @@ typedef enum { /* Flow Control Settings */ typedef enum { - e1000_fc_none = 0, - e1000_fc_rx_pause = 1, - e1000_fc_tx_pause = 2, - e1000_fc_full = 3, - e1000_fc_default = 0xFF + E1000_FC_NONE = 0, + E1000_FC_RX_PAUSE = 1, + E1000_FC_TX_PAUSE = 2, + E1000_FC_FULL = 3, + E1000_FC_DEFAULT = 0xFF } e1000_fc_type; struct e1000_shadow_ram { @@ -302,6 +301,9 @@ typedef enum { #define E1000_BLK_PHY_RESET 12 #define E1000_ERR_SWFW_SYNC 13 +#define E1000_BYTE_SWAP_WORD(_value) ((((_value) & 0x00ff) << 8) | \ + (((_value) & 0xff00) >> 8)) + /* Function prototypes */ /* Initialization */ int32_t e1000_reset_hw(struct e1000_hw *hw); @@ -314,7 +316,7 @@ int32_t e1000_setup_link(struct e1000_hw *hw); int32_t e1000_phy_setup_autoneg(struct e1000_hw *hw); void e1000_config_collision_dist(struct e1000_hw *hw); int32_t e1000_check_for_link(struct e1000_hw *hw); -int32_t e1000_get_speed_and_duplex(struct e1000_hw *hw, uint16_t * speed, uint16_t * duplex); +int32_t e1000_get_speed_and_duplex(struct e1000_hw *hw, uint16_t *speed, uint16_t *duplex); int32_t e1000_force_mac_fc(struct e1000_hw *hw); /* PHY */ @@ -322,9 +324,9 @@ int32_t e1000_read_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *phy int32_t e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t data); int32_t e1000_phy_hw_reset(struct e1000_hw *hw); int32_t e1000_phy_reset(struct e1000_hw *hw); -void e1000_phy_powerdown_workaround(struct e1000_hw *hw); int32_t e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); int32_t e1000_validate_mdi_setting(struct e1000_hw *hw); +void e1000_phy_powerdown_workaround(struct e1000_hw *hw); /* EEPROM Functions */ int32_t e1000_init_eeprom_params(struct e1000_hw *hw); @@ -393,7 +395,6 @@ int32_t e1000_read_eeprom(struct e1000_hw *hw, uint16_t reg, uint16_t words, uin int32_t e1000_validate_eeprom_checksum(struct e1000_hw *hw); int32_t e1000_update_eeprom_checksum(struct e1000_hw *hw); int32_t e1000_write_eeprom(struct e1000_hw *hw, uint16_t reg, uint16_t words, uint16_t *data); -int32_t e1000_read_part_num(struct e1000_hw *hw, uint32_t * part_num); int32_t e1000_read_mac_addr(struct e1000_hw * hw); /* Filters (multicast, vlan, receive) */ @@ -420,6 +421,7 @@ void e1000_pci_set_mwi(struct e1000_hw *hw); void e1000_pci_clear_mwi(struct e1000_hw *hw); void e1000_read_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t * value); void e1000_write_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t * value); +int32_t e1000_read_pcie_cap_reg(struct e1000_hw *hw, uint32_t reg, uint16_t *value); /* Port I/O is only supported on 82544 and newer */ void e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value); int32_t e1000_disable_pciex_master(struct e1000_hw *hw); @@ -574,10 +576,10 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); * E1000_RAR_ENTRIES - 1 multicast addresses. */ #define E1000_RAR_ENTRIES 15 -#define E1000_RAR_ENTRIES_ICH8LAN 7 +#define E1000_RAR_ENTRIES_ICH8LAN 6 -#define MIN_NUMBER_OF_DESCRIPTORS 8 -#define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8 +#define MIN_NUMBER_OF_DESCRIPTORS 8 +#define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8 /* Receive Descriptor */ struct e1000_rx_desc { @@ -1300,6 +1302,7 @@ struct e1000_hw_stats { uint64_t algnerrc; uint64_t symerrs; uint64_t rxerrc; + uint64_t txerrc; uint64_t mpc; uint64_t scc; uint64_t ecol; @@ -1332,8 +1335,9 @@ struct e1000_hw_stats { uint64_t gotch; uint64_t rnbc; uint64_t ruc; - uint64_t rfc; uint64_t roc; + uint64_t rlerrc; + uint64_t rfc; uint64_t rjc; uint64_t mgprc; uint64_t mgpdc; @@ -1367,8 +1371,8 @@ struct e1000_hw_stats { /* Structure containing variables used by the shared code (e1000_hw.c) */ struct e1000_hw { - uint8_t *hw_addr; - uint8_t *flash_address; + uint8_t __iomem *hw_addr; + uint8_t __iomem *flash_address; e1000_mac_type mac_type; e1000_phy_type phy_type; uint32_t phy_init_script; @@ -1440,6 +1444,7 @@ struct e1000_hw { boolean_t tbi_compatibility_on; boolean_t laa_is_present; boolean_t phy_reset_disable; + boolean_t initialize_hw_bits_disable; boolean_t fc_send_xon; boolean_t fc_strict_ieee; boolean_t report_tx_early; @@ -1613,16 +1618,17 @@ struct e1000_hw { #define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 #define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000 #define E1000_CTRL_EXT_LINK_MODE_TBI 0x00C00000 -#define E1000_CTRL_EXT_LINK_MODE_KMRN 0x00000000 +#define E1000_CTRL_EXT_LINK_MODE_KMRN 0x00000000 #define E1000_CTRL_EXT_LINK_MODE_SERDES 0x00C00000 +#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000 #define E1000_CTRL_EXT_WR_WMARK_MASK 0x03000000 #define E1000_CTRL_EXT_WR_WMARK_256 0x00000000 #define E1000_CTRL_EXT_WR_WMARK_320 0x01000000 #define E1000_CTRL_EXT_WR_WMARK_384 0x02000000 #define E1000_CTRL_EXT_WR_WMARK_448 0x03000000 -#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */ -#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */ -#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */ +#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */ +#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */ +#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */ #define E1000_CRTL_EXT_PB_PAREN 0x01000000 /* packet buffer parity error detection enabled */ #define E1000_CTRL_EXT_DF_PAREN 0x02000000 /* descriptor FIFO parity error detection enable */ #define E1000_CTRL_EXT_GHOST_PAREN 0x40000000 @@ -2218,6 +2224,11 @@ struct e1000_host_command_info { #define E1000_FACTPS_LAN_FUNC_SEL 0x40000000 #define E1000_FACTPS_PM_STATE_CHANGED 0x80000000 +/* PCI-Ex Config Space */ +#define PCI_EX_LINK_STATUS 0x12 +#define PCI_EX_LINK_WIDTH_MASK 0x3F0 +#define PCI_EX_LINK_WIDTH_SHIFT 4 + /* EEPROM Commands - Microwire */ #define EEPROM_READ_OPCODE_MICROWIRE 0x6 /* EEPROM read opcode */ #define EEPROM_WRITE_OPCODE_MICROWIRE 0x5 /* EEPROM write opcode */ @@ -3120,6 +3131,7 @@ struct e1000_host_command_info { /* I = Integrated * E = External */ +#define M88_VENDOR 0x0141 #define M88E1000_E_PHY_ID 0x01410C50 #define M88E1000_I_PHY_ID 0x01410C30 #define M88E1011_I_PHY_ID 0x01410C20 @@ -3244,10 +3256,12 @@ struct e1000_host_command_info { #define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */ #define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */ -#define ICH8_FLASH_COMMAND_TIMEOUT 500 /* 500 ms , should be adjusted */ -#define ICH8_FLASH_CYCLE_REPEAT_COUNT 10 /* 10 cycles , should be adjusted */ +#define ICH8_FLASH_COMMAND_TIMEOUT 5000 /* 5000 uSecs - adjusted */ +#define ICH8_FLASH_ERASE_TIMEOUT 3000000 /* Up to 3 seconds - worst case */ +#define ICH8_FLASH_CYCLE_REPEAT_COUNT 10 /* 10 cycles */ #define ICH8_FLASH_SEG_SIZE_256 256 #define ICH8_FLASH_SEG_SIZE_4K 4096 +#define ICH9_FLASH_SEG_SIZE_8K 8192 #define ICH8_FLASH_SEG_SIZE_64K 65536 #define ICH8_CYCLE_READ 0x0 diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 3f6a752700a..7dca38fba6a 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1,25 +1,24 @@ /******************************************************************************* - - Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. - - This program is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by the Free - Software Foundation; either version 2 of the License, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2006 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., 59 - Temple Place - Suite 330, Boston, MA 02111-1307, USA. - - The full GNU General Public License is included in this distribution in the - file called LICENSE. - + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + Contact Information: Linux NICS <linux.nics@intel.com> e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> @@ -36,7 +35,7 @@ static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; #else #define DRIVERNAPI "-NAPI" #endif -#define DRV_VERSION "7.2.7-k2"DRIVERNAPI +#define DRV_VERSION "7.2.9-k2"DRIVERNAPI char e1000_driver_version[] = DRV_VERSION; static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation."; @@ -110,16 +109,24 @@ static struct pci_device_id e1000_pci_tbl[] = { MODULE_DEVICE_TABLE(pci, e1000_pci_tbl); +int e1000_up(struct e1000_adapter *adapter); +void e1000_down(struct e1000_adapter *adapter); +void e1000_reinit_locked(struct e1000_adapter *adapter); +void e1000_reset(struct e1000_adapter *adapter); +int e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx); +int e1000_setup_all_tx_resources(struct e1000_adapter *adapter); +int e1000_setup_all_rx_resources(struct e1000_adapter *adapter); +void e1000_free_all_tx_resources(struct e1000_adapter *adapter); +void e1000_free_all_rx_resources(struct e1000_adapter *adapter); static int e1000_setup_tx_resources(struct e1000_adapter *adapter, - struct e1000_tx_ring *txdr); + struct e1000_tx_ring *txdr); static int e1000_setup_rx_resources(struct e1000_adapter *adapter, - struct e1000_rx_ring *rxdr); + struct e1000_rx_ring *rxdr); static void e1000_free_tx_resources(struct e1000_adapter *adapter, - struct e1000_tx_ring *tx_ring); + struct e1000_tx_ring *tx_ring); static void e1000_free_rx_resources(struct e1000_adapter *adapter, - struct e1000_rx_ring *rx_ring); - -/* Local Function Prototypes */ + struct e1000_rx_ring *rx_ring); +void e1000_update_stats(struct e1000_adapter *adapter); static int e1000_init_module(void); static void e1000_exit_module(void); @@ -172,6 +179,7 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); +void e1000_set_ethtool_ops(struct net_device *netdev); static void e1000_enter_82542_rst(struct e1000_adapter *adapter); static void e1000_leave_82542_rst(struct e1000_adapter *adapter); static void e1000_tx_timeout(struct net_device *dev); @@ -196,6 +204,8 @@ static void e1000_shutdown(struct pci_dev *pdev); static void e1000_netpoll (struct net_device *netdev); #endif +extern void e1000_check_options(struct e1000_adapter *adapter); + static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state); static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev); @@ -212,9 +222,9 @@ static struct pci_driver e1000_driver = { .id_table = e1000_pci_tbl, .probe = e1000_probe, .remove = __devexit_p(e1000_remove), +#ifdef CONFIG_PM /* Power Managment Hooks */ .suspend = e1000_suspend, -#ifdef CONFIG_PM .resume = e1000_resume, #endif .shutdown = e1000_shutdown, @@ -466,13 +476,14 @@ e1000_up(struct e1000_adapter *adapter) adapter->tx_queue_len = netdev->tx_queue_len; - mod_timer(&adapter->watchdog_timer, jiffies); - #ifdef CONFIG_E1000_NAPI netif_poll_enable(netdev); #endif e1000_irq_enable(adapter); + clear_bit(__E1000_DOWN, &adapter->flags); + + mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ); return 0; } @@ -502,25 +513,48 @@ void e1000_power_up_phy(struct e1000_adapter *adapter) static void e1000_power_down_phy(struct e1000_adapter *adapter) { - boolean_t mng_mode_enabled = (adapter->hw.mac_type >= e1000_82571) && - e1000_check_mng_mode(&adapter->hw); - /* Power down the PHY so no link is implied when interface is down - * The PHY cannot be powered down if any of the following is TRUE + /* Power down the PHY so no link is implied when interface is down * + * The PHY cannot be powered down if any of the following is TRUE * * (a) WoL is enabled * (b) AMT is active * (c) SoL/IDER session is active */ if (!adapter->wol && adapter->hw.mac_type >= e1000_82540 && - adapter->hw.mac_type != e1000_ich8lan && - adapter->hw.media_type == e1000_media_type_copper && - !(E1000_READ_REG(&adapter->hw, MANC) & E1000_MANC_SMBUS_EN) && - !mng_mode_enabled && - !e1000_check_phy_reset_block(&adapter->hw)) { + adapter->hw.media_type == e1000_media_type_copper) { uint16_t mii_reg = 0; + + switch (adapter->hw.mac_type) { + case e1000_82540: + case e1000_82545: + case e1000_82545_rev_3: + case e1000_82546: + case e1000_82546_rev_3: + case e1000_82541: + case e1000_82541_rev_2: + case e1000_82547: + case e1000_82547_rev_2: + if (E1000_READ_REG(&adapter->hw, MANC) & + E1000_MANC_SMBUS_EN) + goto out; + break; + case e1000_82571: + case e1000_82572: + case e1000_82573: + case e1000_80003es2lan: + case e1000_ich8lan: + if (e1000_check_mng_mode(&adapter->hw) || + e1000_check_phy_reset_block(&adapter->hw)) + goto out; + break; + default: + goto out; + } e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg); mii_reg |= MII_CR_POWER_DOWN; e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg); mdelay(1); } +out: + return; } void @@ -528,6 +562,10 @@ e1000_down(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; + /* signal that we're down so the interrupt handler does not + * reschedule our watchdog timer */ + set_bit(__E1000_DOWN, &adapter->flags); + e1000_irq_disable(adapter); del_timer_sync(&adapter->tx_fifo_stall_timer); @@ -563,6 +601,9 @@ void e1000_reset(struct e1000_adapter *adapter) { uint32_t pba, manc; +#ifdef DISABLE_MULR + uint32_t tctl; +#endif uint16_t fc_high_water_mark = E1000_FC_HIGH_DIFF; /* Repartition Pba for greater than 9k mtu @@ -629,6 +670,12 @@ e1000_reset(struct e1000_adapter *adapter) e1000_reset_hw(&adapter->hw); if (adapter->hw.mac_type >= e1000_82544) E1000_WRITE_REG(&adapter->hw, WUC, 0); +#ifdef DISABLE_MULR + /* disable Multiple Reads in Transmit Control Register for debugging */ + tctl = E1000_READ_REG(hw, TCTL); + E1000_WRITE_REG(hw, TCTL, tctl & ~E1000_TCTL_MULR); + +#endif if (e1000_init_hw(&adapter->hw)) DPRINTK(PROBE, ERR, "Hardware Error\n"); e1000_update_mng_vlan(adapter); @@ -652,9 +699,7 @@ e1000_reset(struct e1000_adapter *adapter) phy_data); } - if (adapter->hw.mac_type < e1000_ich8lan) - /* FIXME: this code is duplicate and wrong for PCI Express */ - if (adapter->en_mng_pt) { + if ((adapter->en_mng_pt) && (adapter->hw.mac_type < e1000_82571)) { manc = E1000_READ_REG(&adapter->hw, MANC); manc |= (E1000_MANC_ARP_EN | E1000_MANC_EN_MNG2HOST); E1000_WRITE_REG(&adapter->hw, MANC, manc); @@ -760,7 +805,7 @@ e1000_probe(struct pci_dev *pdev, #ifdef CONFIG_NET_POLL_CONTROLLER netdev->poll_controller = e1000_netpoll; #endif - strcpy(netdev->name, pci_name(pdev)); + strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); netdev->mem_start = mmio_start; netdev->mem_end = mmio_start + mmio_len; @@ -863,11 +908,6 @@ e1000_probe(struct pci_dev *pdev, INIT_WORK(&adapter->reset_task, (void (*)(void *))e1000_reset_task, netdev); - /* we're going to reset, so assume we have no link for now */ - - netif_carrier_off(netdev); - netif_stop_queue(netdev); - e1000_check_options(adapter); /* Initial Wake on LAN setting @@ -974,6 +1014,10 @@ e1000_probe(struct pci_dev *pdev, if ((err = register_netdev(netdev))) goto err_register; + /* tell the stack to leave us alone until e1000_open() is called */ + netif_carrier_off(netdev); + netif_stop_queue(netdev); + DPRINTK(PROBE, INFO, "Intel(R) PRO/1000 Network Connection\n"); cards_found++; @@ -1032,8 +1076,7 @@ e1000_remove(struct pci_dev *pdev) flush_scheduled_work(); - if (adapter->hw.mac_type >= e1000_82540 && - adapter->hw.mac_type != e1000_ich8lan && + if (adapter->hw.mac_type < e1000_82571 && adapter->hw.media_type == e1000_media_type_copper) { manc = E1000_READ_REG(&adapter->hw, MANC); if (manc & E1000_MANC_SMBUS_EN) { @@ -1161,6 +1204,8 @@ e1000_sw_init(struct e1000_adapter *adapter) atomic_set(&adapter->irq_sem, 1); spin_lock_init(&adapter->stats_lock); + set_bit(__E1000_DOWN, &adapter->flags); + return 0; } @@ -1226,7 +1271,7 @@ e1000_open(struct net_device *netdev) int err; /* disallow open during test */ - if (test_bit(__E1000_DRIVER_TESTING, &adapter->flags)) + if (test_bit(__E1000_TESTING, &adapter->flags)) return -EBUSY; /* allocate transmit descriptors */ @@ -1299,8 +1344,12 @@ e1000_close(struct net_device *netdev) e1000_free_all_tx_resources(adapter); e1000_free_all_rx_resources(adapter); + /* kill manageability vlan ID if supported, but not if a vlan with + * the same ID is registered on the host OS (let 8021q kill it) */ if ((adapter->hw.mng_cookie.status & - E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) { + E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) && + !(adapter->vlgrp && + adapter->vlgrp->vlan_devices[adapter->mng_vlan_id])) { e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id); } @@ -1510,27 +1559,14 @@ e1000_configure_tx(struct e1000_adapter *adapter) /* Program the Transmit Control Register */ tctl = E1000_READ_REG(hw, TCTL); - tctl &= ~E1000_TCTL_CT; tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC | (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT); -#ifdef DISABLE_MULR - /* disable Multiple Reads for debugging */ - tctl &= ~E1000_TCTL_MULR; -#endif - if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) { tarc = E1000_READ_REG(hw, TARC0); - tarc |= ((1 << 25) | (1 << 21)); + tarc |= (1 << 21); E1000_WRITE_REG(hw, TARC0, tarc); - tarc = E1000_READ_REG(hw, TARC1); - tarc |= (1 << 25); - if (tctl & E1000_TCTL_MULR) - tarc &= ~(1 << 28); - else - tarc |= (1 << 28); - E1000_WRITE_REG(hw, TARC1, tarc); } else if (hw->mac_type == e1000_80003es2lan) { tarc = E1000_READ_REG(hw, TARC0); tarc |= 1; @@ -2892,6 +2928,35 @@ e1000_transfer_dhcp_info(struct e1000_adapter *adapter, struct sk_buff *skb) return 0; } +static int __e1000_maybe_stop_tx(struct net_device *netdev, int size) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_tx_ring *tx_ring = adapter->tx_ring; + + netif_stop_queue(netdev); + /* Herbert's original patch had: + * smp_mb__after_netif_stop_queue(); + * but since that doesn't exist yet, just open code it. */ + smp_mb(); + + /* We need to check again in a case another CPU has just + * made room available. */ + if (likely(E1000_DESC_UNUSED(tx_ring) < size)) + return -EBUSY; + + /* A reprieve! */ + netif_start_queue(netdev); + return 0; +} + +static int e1000_maybe_stop_tx(struct net_device *netdev, + struct e1000_tx_ring *tx_ring, int size) +{ + if (likely(E1000_DESC_UNUSED(tx_ring) >= size)) + return 0; + return __e1000_maybe_stop_tx(netdev, size); +} + #define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 ) static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) @@ -2910,6 +2975,10 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) unsigned int f; len -= skb->data_len; + /* This goes back to the question of how to logically map a tx queue + * to a flow. Right now, performance is impacted slightly negatively + * if using multiple tx queues. If the stack breaks away from a + * single qdisc implementation, we can look at this again. */ tx_ring = adapter->tx_ring; if (unlikely(skb->len <= 0)) { @@ -3005,8 +3074,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) /* need: count + 2 desc gap to keep tail from touching * head, otherwise try next time */ - if (unlikely(E1000_DESC_UNUSED(tx_ring) < count + 2)) { - netif_stop_queue(netdev); + if (unlikely(e1000_maybe_stop_tx(netdev, tx_ring, count + 2))) { spin_unlock_irqrestore(&tx_ring->tx_lock, flags); return NETDEV_TX_BUSY; } @@ -3014,7 +3082,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) if (unlikely(adapter->hw.mac_type == e1000_82547)) { if (unlikely(e1000_82547_fifo_workaround(adapter, skb))) { netif_stop_queue(netdev); - mod_timer(&adapter->tx_fifo_stall_timer, jiffies); + mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1); spin_unlock_irqrestore(&tx_ring->tx_lock, flags); return NETDEV_TX_BUSY; } @@ -3053,8 +3121,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) netdev->trans_start = jiffies; /* Make sure there is space in the ring for the next send. */ - if (unlikely(E1000_DESC_UNUSED(tx_ring) < MAX_SKB_FRAGS + 2)) - netif_stop_queue(netdev); + e1000_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 2); spin_unlock_irqrestore(&tx_ring->tx_lock, flags); return NETDEV_TX_OK; @@ -3131,11 +3198,13 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu) } break; case e1000_82573: - /* only enable jumbo frames if ASPM is disabled completely - * this means both bits must be zero in 0x1A bits 3:2 */ + /* Jumbo Frames not supported if: + * - this is not an 82573L device + * - ASPM is enabled in any way (0x1A bits 3:2) */ e1000_read_eeprom(&adapter->hw, EEPROM_INIT_3GIO_3, 1, &eeprom_data); - if (eeprom_data & EEPROM_WORD1A_ASPM_MASK) { + if ((adapter->hw.device_id != E1000_DEV_ID_82573L) || + (eeprom_data & EEPROM_WORD1A_ASPM_MASK)) { if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) { DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n"); @@ -3143,6 +3212,8 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu) } break; } + /* ERT will be enabled later to enable wire speed receives */ + /* fall through to get support */ case e1000_82571: case e1000_82572: @@ -3328,16 +3399,15 @@ e1000_update_stats(struct e1000_adapter *adapter) adapter->stats.crcerrs + adapter->stats.algnerrc + adapter->stats.ruc + adapter->stats.roc + adapter->stats.cexterr; - adapter->net_stats.rx_length_errors = adapter->stats.ruc + - adapter->stats.roc; + adapter->stats.rlerrc = adapter->stats.ruc + adapter->stats.roc; + adapter->net_stats.rx_length_errors = adapter->stats.rlerrc; adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs; adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc; adapter->net_stats.rx_missed_errors = adapter->stats.mpc; /* Tx Errors */ - - adapter->net_stats.tx_errors = adapter->stats.ecol + - adapter->stats.latecol; + adapter->stats.txerrc = adapter->stats.ecol + adapter->stats.latecol; + adapter->net_stats.tx_errors = adapter->stats.txerrc; adapter->net_stats.tx_aborted_errors = adapter->stats.ecol; adapter->net_stats.tx_window_errors = adapter->stats.latecol; adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs; @@ -3408,7 +3478,9 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) rctl = E1000_READ_REG(hw, RCTL); E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN); } - mod_timer(&adapter->watchdog_timer, jiffies); + /* guard against interrupt when we're going down */ + if (!test_bit(__E1000_DOWN, &adapter->flags)) + mod_timer(&adapter->watchdog_timer, jiffies + 1); } #ifdef CONFIG_E1000_NAPI @@ -3546,13 +3618,14 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter, tx_ring->next_to_clean = i; #define TX_WAKE_THRESHOLD 32 - if (unlikely(cleaned && netif_queue_stopped(netdev) && - netif_carrier_ok(netdev))) { - spin_lock(&tx_ring->tx_lock); - if (netif_queue_stopped(netdev) && - (E1000_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD)) + if (unlikely(cleaned && netif_carrier_ok(netdev) && + E1000_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD)) { + /* Make sure that anybody stopping the queue after this + * sees the new next_to_clean. + */ + smp_mb(); + if (netif_queue_stopped(netdev)) netif_wake_queue(netdev); - spin_unlock(&tx_ring->tx_lock); } if (adapter->detect_tx_hung) { @@ -4412,13 +4485,21 @@ e1000_write_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t *value) pci_write_config_word(adapter->pdev, reg, *value); } -#if 0 -uint32_t -e1000_io_read(struct e1000_hw *hw, unsigned long port) +int32_t +e1000_read_pcie_cap_reg(struct e1000_hw *hw, uint32_t reg, uint16_t *value) { - return inl(port); + struct e1000_adapter *adapter = hw->back; + uint16_t cap_offset; + + cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP); + if (!cap_offset) + return -E1000_ERR_CONFIG; + + pci_read_config_word(adapter->pdev, cap_offset + reg, value); + + return E1000_SUCCESS; } -#endif /* 0 */ + void e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value) @@ -4693,9 +4774,7 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state) pci_enable_wake(pdev, PCI_D3cold, 0); } - /* FIXME: this code is incorrect for PCI Express */ - if (adapter->hw.mac_type >= e1000_82540 && - adapter->hw.mac_type != e1000_ich8lan && + if (adapter->hw.mac_type < e1000_82571 && adapter->hw.media_type == e1000_media_type_copper) { manc = E1000_READ_REG(&adapter->hw, MANC); if (manc & E1000_MANC_SMBUS_EN) { @@ -4747,9 +4826,7 @@ e1000_resume(struct pci_dev *pdev) netif_device_attach(netdev); - /* FIXME: this code is incorrect for PCI Express */ - if (adapter->hw.mac_type >= e1000_82540 && - adapter->hw.mac_type != e1000_ich8lan && + if (adapter->hw.mac_type < e1000_82571 && adapter->hw.media_type == e1000_media_type_copper) { manc = E1000_READ_REG(&adapter->hw, MANC); manc &= ~(E1000_MANC_ARP_EN); @@ -4835,8 +4912,8 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev) } pci_set_master(pdev); - pci_enable_wake(pdev, 3, 0); - pci_enable_wake(pdev, 4, 0); /* 4 == D3 cold */ + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); /* Perform card reset only on one instance of the card */ if (PCI_FUNC (pdev->devfn) != 0) diff --git a/drivers/net/e1000/e1000_osdep.h b/drivers/net/e1000/e1000_osdep.h index 46bc49df15e..a464cb29062 100644 --- a/drivers/net/e1000/e1000_osdep.h +++ b/drivers/net/e1000/e1000_osdep.h @@ -1,25 +1,24 @@ /******************************************************************************* - - Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. - - This program is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by the Free - Software Foundation; either version 2 of the License, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2006 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., 59 - Temple Place - Suite 330, Boston, MA 02111-1307, USA. - - The full GNU General Public License is included in this distribution in the - file called LICENSE. - + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + Contact Information: Linux NICS <linux.nics@intel.com> e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c index 21284273897..9c3c1acefcc 100644 --- a/drivers/net/e1000/e1000_param.c +++ b/drivers/net/e1000/e1000_param.c @@ -1,25 +1,24 @@ /******************************************************************************* - - Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. - - This program is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by the Free - Software Foundation; either version 2 of the License, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2006 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., 59 - Temple Place - Suite 330, Boston, MA 02111-1307, USA. - - The full GNU General Public License is included in this distribution in the - file called LICENSE. - + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + Contact Information: Linux NICS <linux.nics@intel.com> e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> @@ -397,17 +396,17 @@ e1000_check_options(struct e1000_adapter *adapter) { /* Flow Control */ struct e1000_opt_list fc_list[] = - {{ e1000_fc_none, "Flow Control Disabled" }, - { e1000_fc_rx_pause,"Flow Control Receive Only" }, - { e1000_fc_tx_pause,"Flow Control Transmit Only" }, - { e1000_fc_full, "Flow Control Enabled" }, - { e1000_fc_default, "Flow Control Hardware Default" }}; + {{ E1000_FC_NONE, "Flow Control Disabled" }, + { E1000_FC_RX_PAUSE,"Flow Control Receive Only" }, + { E1000_FC_TX_PAUSE,"Flow Control Transmit Only" }, + { E1000_FC_FULL, "Flow Control Enabled" }, + { E1000_FC_DEFAULT, "Flow Control Hardware Default" }}; struct e1000_option opt = { .type = list_option, .name = "Flow Control", .err = "reading default settings from EEPROM", - .def = e1000_fc_default, + .def = E1000_FC_DEFAULT, .arg = { .l = { .nr = ARRAY_SIZE(fc_list), .p = fc_list }} }; diff --git a/drivers/net/fec_8xx/fec_main.c b/drivers/net/fec_8xx/fec_main.c index 22ac2df1aeb..e17a1449ee1 100644 --- a/drivers/net/fec_8xx/fec_main.c +++ b/drivers/net/fec_8xx/fec_main.c @@ -30,6 +30,7 @@ #include <linux/mii.h> #include <linux/ethtool.h> #include <linux/bitops.h> +#include <linux/dma-mapping.h> #include <asm/8xx_immap.h> #include <asm/pgtable.h> @@ -37,7 +38,6 @@ #include <asm/irq.h> #include <asm/uaccess.h> #include <asm/commproc.h> -#include <asm/dma-mapping.h> #include "fec_8xx.h" diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 97db910fbc8..eea1d66c530 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -3789,6 +3789,12 @@ static int nv_loopback_test(struct net_device *dev) /* setup packet for tx */ pkt_len = ETH_DATA_LEN; tx_skb = dev_alloc_skb(pkt_len); + if (!tx_skb) { + printk(KERN_ERR "dev_alloc_skb() failed during loopback test" + " of %s\n", dev->name); + ret = 0; + goto out; + } pkt_data = skb_put(tx_skb, pkt_len); for (i = 0; i < pkt_len; i++) pkt_data[i] = (u8)(i & 0xff); @@ -3853,7 +3859,7 @@ static int nv_loopback_test(struct net_device *dev) tx_skb->end-tx_skb->data, PCI_DMA_TODEVICE); dev_kfree_skb_any(tx_skb); - + out: /* stop engines */ nv_stop_rx(dev); nv_stop_tx(dev); diff --git a/drivers/net/fs_enet/fs_enet.h b/drivers/net/fs_enet/fs_enet.h index 95022c005f7..92590d8fc24 100644 --- a/drivers/net/fs_enet/fs_enet.h +++ b/drivers/net/fs_enet/fs_enet.h @@ -6,11 +6,10 @@ #include <linux/types.h> #include <linux/list.h> #include <linux/phy.h> +#include <linux/dma-mapping.h> #include <linux/fs_enet_pd.h> -#include <asm/dma-mapping.h> - #ifdef CONFIG_CPM1 #include <asm/commproc.h> diff --git a/drivers/net/gt64240eth.h b/drivers/net/gt64240eth.h deleted file mode 100644 index 0d6f486e457..00000000000 --- a/drivers/net/gt64240eth.h +++ /dev/null @@ -1,402 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 Patton Electronics Company - * Copyright (C) 2002 Momentum Computer - * - * Copyright 2000 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * stevel@mvista.com or support@mvista.com - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Ethernet driver definitions for the MIPS GT96100 Advanced - * Communication Controller. - * - * Modified for the Marvellous GT64240 Retarded Communication Controller. - */ -#ifndef _GT64240ETH_H -#define _GT64240ETH_H - -#include <asm/gt64240.h> - -#define ETHERNET_PORTS_DIFFERENCE_OFFSETS 0x400 - -/* Translate those weanie names from Galileo/VxWorks header files: */ - -#define GT64240_MRR MAIN_ROUTING_REGISTER -#define GT64240_CIU_ARBITER_CONFIG COMM_UNIT_ARBITER_CONFIGURATION_REGISTER -#define GT64240_CIU_ARBITER_CONTROL COMM_UNIT_ARBITER_CONTROL -#define GT64240_MAIN_LOW_CAUSE LOW_INTERRUPT_CAUSE_REGISTER -#define GT64240_MAIN_HIGH_CAUSE HIGH_INTERRUPT_CAUSE_REGISTER -#define GT64240_CPU_LOW_MASK CPU_INTERRUPT_MASK_REGISTER_LOW -#define GT64240_CPU_HIGH_MASK CPU_INTERRUPT_MASK_REGISTER_HIGH -#define GT64240_CPU_SELECT_CAUSE CPU_SELECT_CAUSE_REGISTER - -#define GT64240_ETH_PHY_ADDR_REG ETHERNET_PHY_ADDRESS_REGISTER -#define GT64240_ETH_PORT_CONFIG ETHERNET0_PORT_CONFIGURATION_REGISTER -#define GT64240_ETH_PORT_CONFIG_EXT ETHERNET0_PORT_CONFIGURATION_EXTEND_REGISTER -#define GT64240_ETH_PORT_COMMAND ETHERNET0_PORT_COMMAND_REGISTER -#define GT64240_ETH_PORT_STATUS ETHERNET0_PORT_STATUS_REGISTER -#define GT64240_ETH_IO_SIZE ETHERNET_PORTS_DIFFERENCE_OFFSETS -#define GT64240_ETH_SMI_REG ETHERNET_SMI_REGISTER -#define GT64240_ETH_MIB_COUNT_BASE ETHERNET0_MIB_COUNTER_BASE -#define GT64240_ETH_SDMA_CONFIG ETHERNET0_SDMA_CONFIGURATION_REGISTER -#define GT64240_ETH_SDMA_COMM ETHERNET0_SDMA_COMMAND_REGISTER -#define GT64240_ETH_INT_MASK ETHERNET0_INTERRUPT_MASK_REGISTER -#define GT64240_ETH_INT_CAUSE ETHERNET0_INTERRUPT_CAUSE_REGISTER -#define GT64240_ETH_CURR_TX_DESC_PTR0 ETHERNET0_CURRENT_TX_DESCRIPTOR_POINTER0 -#define GT64240_ETH_CURR_TX_DESC_PTR1 ETHERNET0_CURRENT_TX_DESCRIPTOR_POINTER1 -#define GT64240_ETH_1ST_RX_DESC_PTR0 ETHERNET0_FIRST_RX_DESCRIPTOR_POINTER0 -#define GT64240_ETH_CURR_RX_DESC_PTR0 ETHERNET0_CURRENT_RX_DESCRIPTOR_POINTER0 -#define GT64240_ETH_HASH_TBL_PTR ETHERNET0_HASH_TABLE_POINTER_REGISTER - -/* Turn on NAPI by default */ - -#define GT64240_NAPI 1 - -/* Some 64240 settings that SHOULD eventually be setup in PROM monitor: */ -/* (Board-specific to the DSL3224 Rev A board ONLY!) */ -#define D3224_MPP_CTRL0_SETTING 0x66669900 -#define D3224_MPP_CTRL1_SETTING 0x00000000 -#define D3224_MPP_CTRL2_SETTING 0x00887700 -#define D3224_MPP_CTRL3_SETTING 0x00000044 -#define D3224_GPP_IO_CTRL_SETTING 0x0000e800 -#define D3224_GPP_LEVEL_CTRL_SETTING 0xf001f703 -#define D3224_GPP_VALUE_SETTING 0x00000000 - -/* Keep the ring sizes a power of two for efficiency. */ -//-#define TX_RING_SIZE 16 -#define TX_RING_SIZE 64 /* TESTING !!! */ -#define RX_RING_SIZE 32 -#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer. */ - -#define RX_HASH_TABLE_SIZE 16384 -#define HASH_HOP_NUMBER 12 - -#define NUM_INTERFACES 3 - -#define GT64240ETH_TX_TIMEOUT HZ/4 - -#define MIPS_GT64240_BASE 0xf4000000 -#define GT64240_ETH0_BASE (MIPS_GT64240_BASE + GT64240_ETH_PORT_CONFIG) -#define GT64240_ETH1_BASE (GT64240_ETH0_BASE + GT64240_ETH_IO_SIZE) -#define GT64240_ETH2_BASE (GT64240_ETH1_BASE + GT64240_ETH_IO_SIZE) - -#if defined(CONFIG_MIPS_DSL3224) -#define GT64240_ETHER0_IRQ 4 -#define GT64240_ETHER1_IRQ 4 -#else -#define GT64240_ETHER0_IRQ -1 -#define GT64240_ETHER1_IRQ -1 -#endif - -#define REV_GT64240 0x1 -#define REV_GT64240A 0x10 - -#define GT64240ETH_READ(gp, offset) \ - GT_READ((gp)->port_offset + (offset)) - -#define GT64240ETH_WRITE(gp, offset, data) \ - GT_WRITE((gp)->port_offset + (offset), (data)) - -#define GT64240ETH_SETBIT(gp, offset, bits) \ - GT64240ETH_WRITE((gp), (offset), \ - GT64240ETH_READ((gp), (offset)) | (bits)) - -#define GT64240ETH_CLRBIT(gp, offset, bits) \ - GT64240ETH_WRITE((gp), (offset), \ - GT64240ETH_READ((gp), (offset)) & ~(bits)) - -#define GT64240_READ(ofs) GT_READ(ofs) -#define GT64240_WRITE(ofs, data) GT_WRITE((ofs), (data)) - -/* Bit definitions of the SMI Reg */ -enum { - smirDataMask = 0xffff, - smirPhyAdMask = 0x1f << 16, - smirPhyAdBit = 16, - smirRegAdMask = 0x1f << 21, - smirRegAdBit = 21, - smirOpCode = 1 << 26, - smirReadValid = 1 << 27, - smirBusy = 1 << 28 -}; - -/* Bit definitions of the Port Config Reg */ -enum pcr_bits { - pcrPM = 1 << 0, - pcrRBM = 1 << 1, - pcrPBF = 1 << 2, - pcrEN = 1 << 7, - pcrLPBKMask = 0x3 << 8, - pcrLPBKBit = 1 << 8, - pcrFC = 1 << 10, - pcrHS = 1 << 12, - pcrHM = 1 << 13, - pcrHDM = 1 << 14, - pcrHD = 1 << 15, - pcrISLMask = 0x7 << 28, - pcrISLBit = 28, - pcrACCS = 1 << 31 -}; - -/* Bit definitions of the Port Config Extend Reg */ -enum pcxr_bits { - pcxrIGMP = 1, - pcxrSPAN = 2, - pcxrPAR = 4, - pcxrPRIOtxMask = 0x7 << 3, - pcxrPRIOtxBit = 3, - pcxrPRIOrxMask = 0x3 << 6, - pcxrPRIOrxBit = 6, - pcxrPRIOrxOverride = 1 << 8, - pcxrDPLXen = 1 << 9, - pcxrFCTLen = 1 << 10, - pcxrFLP = 1 << 11, - pcxrFCTL = 1 << 12, - pcxrMFLMask = 0x3 << 14, - pcxrMFLBit = 14, - pcxrMIBclrMode = 1 << 16, - pcxrSpeed = 1 << 18, - pcxrSpeeden = 1 << 19, - pcxrRMIIen = 1 << 20, - pcxrDSCPen = 1 << 21 -}; - -/* Bit definitions of the Port Command Reg */ -enum pcmr_bits { - pcmrFJ = 1 << 15 -}; - - -/* Bit definitions of the Port Status Reg */ -enum psr_bits { - psrSpeed = 1, - psrDuplex = 2, - psrFctl = 4, - psrLink = 8, - psrPause = 1 << 4, - psrTxLow = 1 << 5, - psrTxHigh = 1 << 6, - psrTxInProg = 1 << 7 -}; - -/* Bit definitions of the SDMA Config Reg */ -enum sdcr_bits { - sdcrRCMask = 0xf << 2, - sdcrRCBit = 2, - sdcrBLMR = 1 << 6, - sdcrBLMT = 1 << 7, - sdcrPOVR = 1 << 8, - sdcrRIFB = 1 << 9, - sdcrBSZMask = 0x3 << 12, - sdcrBSZBit = 12 -}; - -/* Bit definitions of the SDMA Command Reg */ -enum sdcmr_bits { - sdcmrERD = 1 << 7, - sdcmrAR = 1 << 15, - sdcmrSTDH = 1 << 16, - sdcmrSTDL = 1 << 17, - sdcmrTXDH = 1 << 23, - sdcmrTXDL = 1 << 24, - sdcmrAT = 1 << 31 -}; - -/* Bit definitions of the Interrupt Cause Reg */ -enum icr_bits { - icrRxBuffer = 1, - icrTxBufferHigh = 1 << 2, - icrTxBufferLow = 1 << 3, - icrTxEndHigh = 1 << 6, - icrTxEndLow = 1 << 7, - icrRxError = 1 << 8, - icrTxErrorHigh = 1 << 10, - icrTxErrorLow = 1 << 11, - icrRxOVR = 1 << 12, - icrTxUdr = 1 << 13, - icrRxBufferQ0 = 1 << 16, - icrRxBufferQ1 = 1 << 17, - icrRxBufferQ2 = 1 << 18, - icrRxBufferQ3 = 1 << 19, - icrRxErrorQ0 = 1 << 20, - icrRxErrorQ1 = 1 << 21, - icrRxErrorQ2 = 1 << 22, - icrRxErrorQ3 = 1 << 23, - icrMIIPhySTC = 1 << 28, - icrSMIdone = 1 << 29, - icrEtherIntSum = 1 << 31 -}; - - -/* The Rx and Tx descriptor lists. */ -#ifdef __LITTLE_ENDIAN -typedef struct { - u32 cmdstat; - u16 reserved; //-prk21aug01 u32 reserved:16; - u16 byte_cnt; //-prk21aug01 u32 byte_cnt:16; - u32 buff_ptr; - u32 next; -} gt64240_td_t; - -typedef struct { - u32 cmdstat; - u16 byte_cnt; //-prk21aug01 u32 byte_cnt:16; - u16 buff_sz; //-prk21aug01 u32 buff_sz:16; - u32 buff_ptr; - u32 next; -} gt64240_rd_t; -#elif defined(__BIG_ENDIAN) -typedef struct { - u16 byte_cnt; //-prk21aug01 u32 byte_cnt:16; - u16 reserved; //-prk21aug01 u32 reserved:16; - u32 cmdstat; - u32 next; - u32 buff_ptr; -} gt64240_td_t; - -typedef struct { - u16 buff_sz; //-prk21aug01 u32 buff_sz:16; - u16 byte_cnt; //-prk21aug01 u32 byte_cnt:16; - u32 cmdstat; - u32 next; - u32 buff_ptr; -} gt64240_rd_t; -#else -#error Either __BIG_ENDIAN or __LITTLE_ENDIAN must be defined! -#endif - - -/* Values for the Tx command-status descriptor entry. */ -enum td_cmdstat { - txOwn = 1 << 31, - txAutoMode = 1 << 30, - txEI = 1 << 23, - txGenCRC = 1 << 22, - txPad = 1 << 18, - txFirst = 1 << 17, - txLast = 1 << 16, - txErrorSummary = 1 << 15, - txReTxCntMask = 0x0f << 10, - txReTxCntBit = 10, - txCollision = 1 << 9, - txReTxLimit = 1 << 8, - txUnderrun = 1 << 6, - txLateCollision = 1 << 5 -}; - - -/* Values for the Rx command-status descriptor entry. */ -enum rd_cmdstat { - rxOwn = 1 << 31, - rxAutoMode = 1 << 30, - rxEI = 1 << 23, - rxFirst = 1 << 17, - rxLast = 1 << 16, - rxErrorSummary = 1 << 15, - rxIGMP = 1 << 14, - rxHashExpired = 1 << 13, - rxMissedFrame = 1 << 12, - rxFrameType = 1 << 11, - rxShortFrame = 1 << 8, - rxMaxFrameLen = 1 << 7, - rxOverrun = 1 << 6, - rxCollision = 1 << 4, - rxCRCError = 1 -}; - -/* Bit fields of a Hash Table Entry */ -enum hash_table_entry { - hteValid = 1, - hteSkip = 2, - hteRD = 4 -}; - -// The MIB counters -typedef struct { - u32 byteReceived; - u32 byteSent; - u32 framesReceived; - u32 framesSent; - u32 totalByteReceived; - u32 totalFramesReceived; - u32 broadcastFramesReceived; - u32 multicastFramesReceived; - u32 cRCError; - u32 oversizeFrames; - u32 fragments; - u32 jabber; - u32 collision; - u32 lateCollision; - u32 frames64; - u32 frames65_127; - u32 frames128_255; - u32 frames256_511; - u32 frames512_1023; - u32 frames1024_MaxSize; - u32 macRxError; - u32 droppedFrames; - u32 outMulticastFrames; - u32 outBroadcastFrames; - u32 undersizeFrames; -} mib_counters_t; - - -struct gt64240_private { - gt64240_rd_t *rx_ring; - gt64240_td_t *tx_ring; - // The Rx and Tx rings must be 16-byte aligned - dma_addr_t rx_ring_dma; - dma_addr_t tx_ring_dma; - char *hash_table; - // The Hash Table must be 8-byte aligned - dma_addr_t hash_table_dma; - int hash_mode; - - // The Rx buffers must be 8-byte aligned - char *rx_buff; - dma_addr_t rx_buff_dma; - // Tx buffers (tx_skbuff[i]->data) with less than 8 bytes - // of payload must be 8-byte aligned - struct sk_buff *tx_skbuff[TX_RING_SIZE]; - int rx_next_out; /* The next free ring entry to receive */ - int tx_next_in; /* The next free ring entry to send */ - int tx_next_out; /* The last ring entry the ISR processed */ - int tx_count; /* current # of pkts waiting to be sent in Tx ring */ - int intr_work_done; /* number of Rx and Tx pkts processed in the isr */ - int tx_full; /* Tx ring is full */ - - mib_counters_t mib; - struct net_device_stats stats; - - int io_size; - int port_num; // 0 or 1 - u32 port_offset; - - int phy_addr; // PHY address - u32 last_psr; // last value of the port status register - - int options; /* User-settable misc. driver options. */ - int drv_flags; - spinlock_t lock; /* Serialise access to device */ - struct mii_if_info mii_if; - - u32 msg_enable; -}; - -#endif /* _GT64240ETH_H */ diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c index 03b3df33d81..ae8ad4f763b 100644 --- a/drivers/net/hp100.c +++ b/drivers/net/hp100.c @@ -188,10 +188,12 @@ struct hp100_private { /* * variables */ +#ifdef CONFIG_ISA static const char *hp100_isa_tbl[] = { "HWPF150", /* HP J2573 rev A */ "HWP1950", /* HP J2573 */ }; +#endif #ifdef CONFIG_EISA static struct eisa_device_id hp100_eisa_tbl[] = { @@ -333,6 +335,7 @@ static __devinit const char *hp100_read_id(int ioaddr) return str; } +#ifdef CONFIG_ISA static __init int hp100_isa_probe1(struct net_device *dev, int ioaddr) { const char *sig; @@ -390,9 +393,9 @@ static int __init hp100_isa_probe(struct net_device *dev, int addr) } return err; } +#endif /* CONFIG_ISA */ - -#ifndef MODULE +#if !defined(MODULE) && defined(CONFIG_ISA) struct net_device * __init hp100_probe(int unit) { struct net_device *dev = alloc_etherdev(sizeof(struct hp100_private)); @@ -422,7 +425,7 @@ struct net_device * __init hp100_probe(int unit) free_netdev(dev); return ERR_PTR(err); } -#endif +#endif /* !MODULE && CONFIG_ISA */ static int __devinit hp100_probe1(struct net_device *dev, int ioaddr, u_char bus, struct pci_dev *pci_dev) diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c index 6469130c141..c26a4b8e552 100644 --- a/drivers/net/ifb.c +++ b/drivers/net/ifb.c @@ -200,8 +200,8 @@ static struct net_device_stats *ifb_get_stats(struct net_device *dev) pr_debug("tasklets stats %ld:%ld:%ld:%ld:%ld:%ld:%ld:%ld:%ld \n", dp->st_task_enter, dp->st_txq_refl_try, dp->st_rxq_enter, - dp->st_rx2tx_tran dp->st_rxq_notenter, dp->st_rx_frm_egr, - dp->st_rx_frm_ing, dp->st_rxq_check, dp->st_rxq_rsch ); + dp->st_rx2tx_tran, dp->st_rxq_notenter, dp->st_rx_frm_egr, + dp->st_rx_frm_ing, dp->st_rxq_check, dp->st_rxq_rsch); return stats; } diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig index e9e6d99a9ad..7c8ccc09b60 100644 --- a/drivers/net/irda/Kconfig +++ b/drivers/net/irda/Kconfig @@ -287,6 +287,7 @@ comment "FIR device drivers" config USB_IRDA tristate "IrDA USB dongles" depends on IRDA && USB + select FW_LOADER ---help--- Say Y here if you want to build support for the USB IrDA FIR Dongle device driver. To compile it as a module, choose M here: the module diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c index 2a0d538b387..383cef1f599 100644 --- a/drivers/net/irda/irda-usb.c +++ b/drivers/net/irda/irda-usb.c @@ -671,10 +671,8 @@ static void irda_usb_net_timeout(struct net_device *netdev) * Jean II */ done = 1; break; - case -ECONNABORTED: /* -103 */ - case -ECONNRESET: /* -104 */ - case -ETIMEDOUT: /* -110 */ - case -ENOENT: /* -2 (urb unlinked by us) */ + case -ECONNRESET: + case -ENOENT: /* urb unlinked by us */ default: /* ??? - Play safe */ urb->status = 0; netif_wake_queue(self->netdev); @@ -712,10 +710,8 @@ static void irda_usb_net_timeout(struct net_device *netdev) * Jean II */ done = 1; break; - case -ECONNABORTED: /* -103 */ - case -ECONNRESET: /* -104 */ - case -ETIMEDOUT: /* -110 */ - case -ENOENT: /* -2 (urb unlinked by us) */ + case -ECONNRESET: + case -ENOENT: /* urb unlinked by us */ default: /* ??? - Play safe */ if(skb != NULL) { dev_kfree_skb_any(skb); @@ -845,14 +841,14 @@ static void irda_usb_receive(struct urb *urb, struct pt_regs *regs) self->stats.rx_crc_errors++; /* Also precursor to a hot-unplug on UHCI. */ /* Fallthrough... */ - case -ECONNRESET: /* -104 */ + case -ECONNRESET: /* Random error, if I remember correctly */ /* uhci_cleanup_unlink() is going to kill the Rx * URB just after we return. No problem, at this * point the URB will be idle ;-) - Jean II */ - case -ESHUTDOWN: /* -108 */ + case -ESHUTDOWN: /* That's usually a hot-unplug. Submit will fail... */ - case -ETIMEDOUT: /* -110 */ + case -ETIME: /* Usually precursor to a hot-unplug on OHCI. */ default: self->stats.rx_errors++; diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c index cb62f2a9676..7185a4ee3c1 100644 --- a/drivers/net/irda/nsc-ircc.c +++ b/drivers/net/irda/nsc-ircc.c @@ -110,7 +110,7 @@ static nsc_chip_t chips[] = { { "PC87338", { 0x398, 0x15c, 0x2e }, 0x08, 0xb0, 0xf8, nsc_ircc_probe_338, nsc_ircc_init_338 }, /* Contributed by Steffen Pingel - IBM X40 */ - { "PC8738x", { 0x164e, 0x4e, 0x0 }, 0x20, 0xf4, 0xff, + { "PC8738x", { 0x164e, 0x4e, 0x2e }, 0x20, 0xf4, 0xff, nsc_ircc_probe_39x, nsc_ircc_init_39x }, /* Contributed by Jan Frey - IBM A30/A31 */ { "PC8739x", { 0x2e, 0x4e, 0x0 }, 0x20, 0xea, 0xff, diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c index 2eff45bedc7..22358ff68c4 100644 --- a/drivers/net/irda/smsc-ircc2.c +++ b/drivers/net/irda/smsc-ircc2.c @@ -2354,6 +2354,26 @@ static int __init smsc_superio_lpc(unsigned short cfg_base) #define PCIID_VENDOR_INTEL 0x8086 #define PCIID_VENDOR_ALI 0x10b9 static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __initdata = { + /* + * Subsystems needing entries: + * 0x10b9:0x1533 0x103c:0x0850 HP nx9010 family + * 0x10b9:0x1533 0x0e11:0x005a Compaq nc4000 family + * 0x8086:0x24cc 0x0e11:0x002a HP nx9000 family + */ + { + /* Guessed entry */ + .vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */ + .device = 0x24cc, + .subvendor = 0x103c, + .subdevice = 0x08bc, + .sir_io = 0x02f8, + .fir_io = 0x0130, + .fir_irq = 0x05, + .fir_dma = 0x03, + .cfg_base = 0x004e, + .preconfigure = preconfigure_through_82801, + .name = "HP nx5000 family", + }, { .vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */ .device = 0x24cc, @@ -2366,7 +2386,7 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini .fir_dma = 0x03, .cfg_base = 0x004e, .preconfigure = preconfigure_through_82801, - .name = "HP nc8000", + .name = "HP nc8000 family", }, { .vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */ @@ -2379,7 +2399,21 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __ini .fir_dma = 0x03, .cfg_base = 0x004e, .preconfigure = preconfigure_through_82801, - .name = "HP nc6000", + .name = "HP nc6000 family", + }, + { + .vendor = PCIID_VENDOR_INTEL, /* Intel 82801DBM LPC bridge */ + .device = 0x24cc, + .subvendor = 0x0e11, + .subdevice = 0x0860, + /* I assume these are the same for x1000 as for the others */ + .sir_io = 0x02e8, + .fir_io = 0x02f8, + .fir_irq = 0x07, + .fir_dma = 0x03, + .cfg_base = 0x002e, + .preconfigure = preconfigure_through_82801, + .name = "Compaq x1000 family", }, { /* Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge */ diff --git a/drivers/net/irda/stir4200.c b/drivers/net/irda/stir4200.c index d61b208b52a..12103c93f7e 100644 --- a/drivers/net/irda/stir4200.c +++ b/drivers/net/irda/stir4200.c @@ -149,8 +149,6 @@ enum StirFifoCtlMask { FIFOCTL_DIR = 0x10, FIFOCTL_CLR = 0x08, FIFOCTL_EMPTY = 0x04, - FIFOCTL_RXERR = 0x02, - FIFOCTL_TXERR = 0x01, }; enum StirDiagMask { @@ -615,19 +613,6 @@ static int fifo_txwait(struct stir_cb *stir, int space) pr_debug("fifo status 0x%lx count %lu\n", status, count); - /* error when receive/transmit fifo gets confused */ - if (status & FIFOCTL_RXERR) { - stir->stats.rx_fifo_errors++; - stir->stats.rx_errors++; - break; - } - - if (status & FIFOCTL_TXERR) { - stir->stats.tx_fifo_errors++; - stir->stats.tx_errors++; - break; - } - /* is fifo receiving already, or empty */ if (!(status & FIFOCTL_DIR) || (status & FIFOCTL_EMPTY)) diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c index 79b85f32750..d916e1257c4 100644 --- a/drivers/net/irda/via-ircc.c +++ b/drivers/net/irda/via-ircc.c @@ -1223,8 +1223,13 @@ static int upload_rxdata(struct via_ircc_cb *self, int iobase) IRDA_DEBUG(2, "%s(): len=%x\n", __FUNCTION__, len); + if ((len - 4) < 2) { + self->stats.rx_dropped++; + return FALSE; + } + skb = dev_alloc_skb(len + 1); - if ((skb == NULL) || ((len - 4) < 2)) { + if (skb == NULL) { self->stats.rx_dropped++; return FALSE; } diff --git a/drivers/net/irda/vlsi_ir.h b/drivers/net/irda/vlsi_ir.h index a82a4ba8de4..c37f0bc4c7f 100644 --- a/drivers/net/irda/vlsi_ir.h +++ b/drivers/net/irda/vlsi_ir.h @@ -58,7 +58,7 @@ typedef void irqreturn_t; /* PDE() introduced in 2.5.4 */ #ifdef CONFIG_PROC_FS -#define PDE(inode) ((inode)->u.generic_ip) +#define PDE(inode) ((inode)->i_private) #endif /* irda crc16 calculation exported in 2.5.42 */ diff --git a/drivers/net/ixgb/Makefile b/drivers/net/ixgb/Makefile index a8a2d3d0356..838a5084fa0 100644 --- a/drivers/net/ixgb/Makefile +++ b/drivers/net/ixgb/Makefile @@ -1,33 +1,33 @@ ################################################################################ # -# -# Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. -# -# This program is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by the Free -# Software Foundation; either version 2 of the License, or (at your option) -# any later version. -# -# This program is distributed in the hope that it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# Intel PRO/10GbE Linux driver +# Copyright(c) 1999 - 2006 Intel Corporation. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms and conditions of the GNU General Public License, +# version 2, as published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for # more details. -# +# # You should have received a copy of the GNU General Public License along with -# this program; if not, write to the Free Software Foundation, Inc., 59 -# Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# The full GNU General Public License is included in this distribution in the -# file called LICENSE. -# +# this program; if not, write to the Free Software Foundation, Inc., +# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. +# +# The full GNU General Public License is included in this distribution in +# the file called "COPYING". +# # Contact Information: # Linux NICS <linux.nics@intel.com> +# e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> # Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 # ################################################################################ # -# Makefile for the Intel(R) PRO/10GbE driver +# Makefile for the Intel(R) PRO/10GbE ethernet driver # obj-$(CONFIG_IXGB) += ixgb.o diff --git a/drivers/net/ixgb/ixgb.h b/drivers/net/ixgb/ixgb.h index a51604b3651..50ffe90488f 100644 --- a/drivers/net/ixgb/ixgb.h +++ b/drivers/net/ixgb/ixgb.h @@ -1,27 +1,27 @@ /******************************************************************************* - - Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. - - This program is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by the Free - Software Foundation; either version 2 of the License, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + Intel PRO/10GbE Linux driver + Copyright(c) 1999 - 2006 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., 59 - Temple Place - Suite 330, Boston, MA 02111-1307, USA. - - The full GNU General Public License is included in this distribution in the - file called LICENSE. - + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + Contact Information: Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 *******************************************************************************/ @@ -111,7 +111,7 @@ struct ixgb_adapter; #define IXGB_RXBUFFER_16384 16384 /* How many Rx Buffers do we bundle into one write to the hardware ? */ -#define IXGB_RX_BUFFER_WRITE 4 /* Must be power of 2 */ +#define IXGB_RX_BUFFER_WRITE 8 /* Must be power of 2 */ /* only works for sizes that are powers of 2 */ #define IXGB_ROUNDUP(i, size) ((i) = (((i) + (size) - 1) & ~((size) - 1))) diff --git a/drivers/net/ixgb/ixgb_ee.c b/drivers/net/ixgb/ixgb_ee.c index 8357c5590bf..f15aebde7b9 100644 --- a/drivers/net/ixgb/ixgb_ee.c +++ b/drivers/net/ixgb/ixgb_ee.c @@ -1,27 +1,27 @@ /******************************************************************************* - - Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. - - This program is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by the Free - Software Foundation; either version 2 of the License, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + Intel PRO/10GbE Linux driver + Copyright(c) 1999 - 2006 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., 59 - Temple Place - Suite 330, Boston, MA 02111-1307, USA. - - The full GNU General Public License is included in this distribution in the - file called LICENSE. - + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + Contact Information: Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 *******************************************************************************/ diff --git a/drivers/net/ixgb/ixgb_ee.h b/drivers/net/ixgb/ixgb_ee.h index bf6fa220f38..ef236b935c1 100644 --- a/drivers/net/ixgb/ixgb_ee.h +++ b/drivers/net/ixgb/ixgb_ee.h @@ -1,27 +1,27 @@ /******************************************************************************* - - Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. - - This program is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by the Free - Software Foundation; either version 2 of the License, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + Intel PRO/10GbE Linux driver + Copyright(c) 1999 - 2006 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., 59 - Temple Place - Suite 330, Boston, MA 02111-1307, USA. - - The full GNU General Public License is included in this distribution in the - file called LICENSE. - + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + Contact Information: Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 *******************************************************************************/ diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c index 64a383e4e89..cd22523fb03 100644 --- a/drivers/net/ixgb/ixgb_ethtool.c +++ b/drivers/net/ixgb/ixgb_ethtool.c @@ -1,27 +1,27 @@ /******************************************************************************* - - Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. - - This program is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by the Free - Software Foundation; either version 2 of the License, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + Intel PRO/10GbE Linux driver + Copyright(c) 1999 - 2006 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., 59 - Temple Place - Suite 330, Boston, MA 02111-1307, USA. - - The full GNU General Public License is included in this distribution in the - file called LICENSE. - + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + Contact Information: Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 *******************************************************************************/ diff --git a/drivers/net/ixgb/ixgb_hw.c b/drivers/net/ixgb/ixgb_hw.c index acc6df7a6b3..02089b64e42 100644 --- a/drivers/net/ixgb/ixgb_hw.c +++ b/drivers/net/ixgb/ixgb_hw.c @@ -1,27 +1,27 @@ /******************************************************************************* - - Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. - - This program is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by the Free - Software Foundation; either version 2 of the License, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + Intel PRO/10GbE Linux driver + Copyright(c) 1999 - 2006 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., 59 - Temple Place - Suite 330, Boston, MA 02111-1307, USA. - - The full GNU General Public License is included in this distribution in the - file called LICENSE. - + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + Contact Information: Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 *******************************************************************************/ diff --git a/drivers/net/ixgb/ixgb_hw.h b/drivers/net/ixgb/ixgb_hw.h index cb4568915ad..40ef5ca8871 100644 --- a/drivers/net/ixgb/ixgb_hw.h +++ b/drivers/net/ixgb/ixgb_hw.h @@ -1,27 +1,27 @@ /******************************************************************************* - - Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. - - This program is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by the Free - Software Foundation; either version 2 of the License, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + Intel PRO/10GbE Linux driver + Copyright(c) 1999 - 2006 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., 59 - Temple Place - Suite 330, Boston, MA 02111-1307, USA. - - The full GNU General Public License is included in this distribution in the - file called LICENSE. - + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + Contact Information: Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 *******************************************************************************/ diff --git a/drivers/net/ixgb/ixgb_ids.h b/drivers/net/ixgb/ixgb_ids.h index 9fd61189b4b..4376e7e8fbe 100644 --- a/drivers/net/ixgb/ixgb_ids.h +++ b/drivers/net/ixgb/ixgb_ids.h @@ -1,27 +1,27 @@ /******************************************************************************* - - Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. - - This program is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by the Free - Software Foundation; either version 2 of the License, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + Intel PRO/10GbE Linux driver + Copyright(c) 1999 - 2006 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., 59 - Temple Place - Suite 330, Boston, MA 02111-1307, USA. - - The full GNU General Public License is included in this distribution in the - file called LICENSE. - + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + Contact Information: Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 *******************************************************************************/ diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index 2e0f4b950a9..cfde7c2569b 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -1,27 +1,27 @@ /******************************************************************************* - - Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. - - This program is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by the Free - Software Foundation; either version 2 of the License, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + Intel PRO/10GbE Linux driver + Copyright(c) 1999 - 2006 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., 59 - Temple Place - Suite 330, Boston, MA 02111-1307, USA. - - The full GNU General Public License is included in this distribution in the - file called LICENSE. - + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + Contact Information: Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 *******************************************************************************/ @@ -36,7 +36,7 @@ static char ixgb_driver_string[] = "Intel(R) PRO/10GbE Network Driver"; #else #define DRIVERNAPI "-NAPI" #endif -#define DRV_VERSION "1.0.112-k2"DRIVERNAPI +#define DRV_VERSION "1.0.117-k2"DRIVERNAPI char ixgb_driver_version[] = DRV_VERSION; static char ixgb_copyright[] = "Copyright (c) 1999-2006 Intel Corporation."; @@ -437,7 +437,7 @@ ixgb_probe(struct pci_dev *pdev, netdev->poll_controller = ixgb_netpoll; #endif - strcpy(netdev->name, pci_name(pdev)); + strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); netdev->mem_start = mmio_start; netdev->mem_end = mmio_start + mmio_len; netdev->base_addr = adapter->hw.io_base; @@ -2230,7 +2230,7 @@ static pci_ers_result_t ixgb_io_error_detected (struct pci_dev *pdev, enum pci_channel_state state) { struct net_device *netdev = pci_get_drvdata(pdev); - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); if(netif_running(netdev)) ixgb_down(adapter, TRUE); @@ -2253,7 +2253,7 @@ static pci_ers_result_t ixgb_io_error_detected (struct pci_dev *pdev, static pci_ers_result_t ixgb_io_slot_reset (struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); if(pci_enable_device(pdev)) { DPRINTK(PROBE, ERR, "Cannot re-enable PCI device after reset.\n"); @@ -2297,7 +2297,7 @@ static pci_ers_result_t ixgb_io_slot_reset (struct pci_dev *pdev) static void ixgb_io_resume (struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); - struct ixgb_adapter *adapter = netdev->priv; + struct ixgb_adapter *adapter = netdev_priv(netdev); pci_set_master(pdev); diff --git a/drivers/net/ixgb/ixgb_osdep.h b/drivers/net/ixgb/ixgb_osdep.h index 19cb1d586de..8434d752fd8 100644 --- a/drivers/net/ixgb/ixgb_osdep.h +++ b/drivers/net/ixgb/ixgb_osdep.h @@ -1,27 +1,27 @@ /******************************************************************************* - - Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. - - This program is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by the Free - Software Foundation; either version 2 of the License, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + Intel PRO/10GbE Linux driver + Copyright(c) 1999 - 2006 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., 59 - Temple Place - Suite 330, Boston, MA 02111-1307, USA. - - The full GNU General Public License is included in this distribution in the - file called LICENSE. - + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + Contact Information: Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 *******************************************************************************/ diff --git a/drivers/net/ixgb/ixgb_param.c b/drivers/net/ixgb/ixgb_param.c index 39fbed29a3d..b27442a121f 100644 --- a/drivers/net/ixgb/ixgb_param.c +++ b/drivers/net/ixgb/ixgb_param.c @@ -1,27 +1,27 @@ /******************************************************************************* - - Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. - - This program is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by the Free - Software Foundation; either version 2 of the License, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + Intel PRO/10GbE Linux driver + Copyright(c) 1999 - 2006 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., 59 - Temple Place - Suite 330, Boston, MA 02111-1307, USA. - - The full GNU General Public License is included in this distribution in the - file called LICENSE. - + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + Contact Information: Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 *******************************************************************************/ diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c index f429b19bf62..4178b4b1d2d 100644 --- a/drivers/net/loopback.c +++ b/drivers/net/loopback.c @@ -161,15 +161,13 @@ static int loopback_xmit(struct sk_buff *skb, struct net_device *dev) return(0); } +static struct net_device_stats loopback_stats; + static struct net_device_stats *get_stats(struct net_device *dev) { - struct net_device_stats *stats = dev->priv; + struct net_device_stats *stats = &loopback_stats; int i; - if (!stats) { - return NULL; - } - memset(stats, 0, sizeof(struct net_device_stats)); for_each_possible_cpu(i) { @@ -185,19 +183,28 @@ static struct net_device_stats *get_stats(struct net_device *dev) return stats; } -static u32 loopback_get_link(struct net_device *dev) +static u32 always_on(struct net_device *dev) { return 1; } static const struct ethtool_ops loopback_ethtool_ops = { - .get_link = loopback_get_link, + .get_link = always_on, .get_tso = ethtool_op_get_tso, .set_tso = ethtool_op_set_tso, + .get_tx_csum = always_on, + .get_sg = always_on, + .get_rx_csum = always_on, }; +/* + * The loopback device is special. There is only one instance and + * it is statically allocated. Don't do this for other devices. + */ struct net_device loopback_dev = { .name = "lo", + .get_stats = &get_stats, + .priv = &loopback_stats, .mtu = (16 * 1024) + 20 + 20 + 12, .hard_start_xmit = loopback_xmit, .hard_header = eth_header, @@ -221,16 +228,6 @@ struct net_device loopback_dev = { /* Setup and register the loopback device. */ int __init loopback_init(void) { - struct net_device_stats *stats; - - /* Can survive without statistics */ - stats = kmalloc(sizeof(struct net_device_stats), GFP_KERNEL); - if (stats) { - memset(stats, 0, sizeof(struct net_device_stats)); - loopback_dev.priv = stats; - loopback_dev.get_stats = &get_stats; - } - return register_netdev(&loopback_dev); }; diff --git a/drivers/net/ne3210.c b/drivers/net/ne3210.c index 0fa8e4d2276..d6632897542 100644 --- a/drivers/net/ne3210.c +++ b/drivers/net/ne3210.c @@ -343,6 +343,7 @@ static struct eisa_device_id ne3210_ids[] = { { "NVL1801" }, { "" }, }; +MODULE_DEVICE_TABLE(eisa, ne3210_ids); static struct eisa_driver ne3210_eisa_driver = { .id_table = ne3210_ids, diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c index 19f7ee63276..94b47c8d0ab 100644 --- a/drivers/net/phy/fixed.c +++ b/drivers/net/phy/fixed.c @@ -289,9 +289,13 @@ static int fixed_mdio_register_device(int number, int speed, int duplex) goto probe_fail; } - device_bind_driver(&phydev->dev); + err = device_bind_driver(&phydev->dev); + up_write(&phydev->dev.bus->subsys.rwsem); + if (err) + goto probe_fail; + return 0; probe_fail: diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 2d1ecfdc80d..3bbd5e70c20 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -212,11 +212,13 @@ struct phy_device *phy_attach(struct net_device *dev, err = d->driver->probe(d); - if (err < 0) - return ERR_PTR(err); + if (err >= 0) + err = device_bind_driver(d); - device_bind_driver(d); up_write(&d->bus->subsys.rwsem); + + if (err) + return ERR_PTR(err); } if (phydev->attached_dev) { @@ -522,7 +524,7 @@ EXPORT_SYMBOL(genphy_read_status); static int genphy_config_init(struct phy_device *phydev) { - u32 val; + int val; u32 features; /* For now, I'll claim that the generic driver supports diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index 5666ed99814..0adee733b76 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -600,6 +600,7 @@ static int pppoe_connect(struct socket *sock, struct sockaddr *uservaddr, po->chan.hdrlen = (sizeof(struct pppoe_hdr) + dev->hard_header_len); + po->chan.mtu = dev->mtu - sizeof(struct pppoe_hdr); po->chan.private = sk; po->chan.ops = &pppoe_chan_ops; diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index f5dbeb27b6f..1bf23e41f58 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -2904,7 +2904,7 @@ static void s2io_mdio_write(u32 mmd_type, u64 addr, u16 value, struct net_device { u64 val64 = 0x0; nic_t *sp = dev->priv; - XENA_dev_config_t *bar0 = (XENA_dev_config_t *)sp->bar0; + XENA_dev_config_t __iomem *bar0 = sp->bar0; //address transaction val64 = val64 | MDIO_MMD_INDX_ADDR(addr) @@ -2953,7 +2953,7 @@ static u64 s2io_mdio_read(u32 mmd_type, u64 addr, struct net_device *dev) u64 val64 = 0x0; u64 rval64 = 0x0; nic_t *sp = dev->priv; - XENA_dev_config_t *bar0 = (XENA_dev_config_t *)sp->bar0; + XENA_dev_config_t __iomem *bar0 = sp->bar0; /* address transaction */ val64 = val64 | MDIO_MMD_INDX_ADDR(addr) @@ -3276,7 +3276,7 @@ static void alarm_intr_handler(struct s2io_nic *nic) * SUCCESS on success and FAILURE on failure. */ -static int wait_for_cmd_complete(void *addr, u64 busy_bit) +static int wait_for_cmd_complete(void __iomem *addr, u64 busy_bit) { int ret = FAILURE, cnt = 0; u64 val64; @@ -4303,11 +4303,11 @@ static struct net_device_stats *s2io_get_stats(struct net_device *dev) sp->stats.tx_errors = le32_to_cpu(mac_control->stats_info->tmac_any_err_frms); sp->stats.rx_errors = - le32_to_cpu(mac_control->stats_info->rmac_drop_frms); + le64_to_cpu(mac_control->stats_info->rmac_drop_frms); sp->stats.multicast = le32_to_cpu(mac_control->stats_info->rmac_vld_mcst_frms); sp->stats.rx_length_errors = - le32_to_cpu(mac_control->stats_info->rmac_long_frms); + le64_to_cpu(mac_control->stats_info->rmac_long_frms); return (&sp->stats); } diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 9142d91355b..705e9a8fa30 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -58,6 +58,7 @@ #define TX_WATCHDOG (5 * HZ) #define NAPI_WEIGHT 64 #define BLINK_MS 250 +#define LINK_HZ (HZ/2) MODULE_DESCRIPTION("SysKonnect Gigabit Ethernet driver"); MODULE_AUTHOR("Stephen Hemminger <shemminger@osdl.org>"); @@ -605,7 +606,12 @@ static void skge_led(struct skge_port *skge, enum led_mode mode) if (hw->chip_id == CHIP_ID_GENESIS) { switch (mode) { case LED_MODE_OFF: - xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_OFF); + if (hw->phy_type == SK_PHY_BCOM) + xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_OFF); + else { + skge_write32(hw, SK_REG(port, TX_LED_VAL), 0); + skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_T_OFF); + } skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF); skge_write32(hw, SK_REG(port, RX_LED_VAL), 0); skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_T_OFF); @@ -625,8 +631,14 @@ static void skge_led(struct skge_port *skge, enum led_mode mode) skge_write32(hw, SK_REG(port, RX_LED_VAL), 100); skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START); - xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_ON); - break; + if (hw->phy_type == SK_PHY_BCOM) + xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_ON); + else { + skge_write8(hw, SK_REG(port, TX_LED_TST), LED_T_ON); + skge_write32(hw, SK_REG(port, TX_LED_VAL), 100); + skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_START); + } + } } else { switch (mode) { @@ -879,6 +891,9 @@ static int __xm_phy_read(struct skge_hw *hw, int port, u16 reg, u16 *val) xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr); *val = xm_read16(hw, port, XM_PHY_DATA); + if (hw->phy_type == SK_PHY_XMAC) + goto ready; + for (i = 0; i < PHY_RETRIES; i++) { if (xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_RDY) goto ready; @@ -965,7 +980,8 @@ static void genesis_reset(struct skge_hw *hw, int port) xm_write16(hw, port, XM_RX_CMD, 0); /* reset RX CMD Reg */ /* disable Broadcom PHY IRQ */ - xm_write16(hw, port, PHY_BCOM_INT_MASK, 0xffff); + if (hw->phy_type == SK_PHY_BCOM) + xm_write16(hw, port, PHY_BCOM_INT_MASK, 0xffff); xm_outhash(hw, port, XM_HSM, zero); } @@ -1000,60 +1016,64 @@ static void bcom_check_link(struct skge_hw *hw, int port) if (netif_carrier_ok(dev)) skge_link_down(skge); - } else { - if (skge->autoneg == AUTONEG_ENABLE && - (status & PHY_ST_AN_OVER)) { - u16 lpa = xm_phy_read(hw, port, PHY_BCOM_AUNE_LP); - u16 aux = xm_phy_read(hw, port, PHY_BCOM_AUX_STAT); - - if (lpa & PHY_B_AN_RF) { - printk(KERN_NOTICE PFX "%s: remote fault\n", - dev->name); - return; - } + return; + } - /* Check Duplex mismatch */ - switch (aux & PHY_B_AS_AN_RES_MSK) { - case PHY_B_RES_1000FD: - skge->duplex = DUPLEX_FULL; - break; - case PHY_B_RES_1000HD: - skge->duplex = DUPLEX_HALF; - break; - default: - printk(KERN_NOTICE PFX "%s: duplex mismatch\n", - dev->name); - return; - } + if (skge->autoneg == AUTONEG_ENABLE) { + u16 lpa, aux; + if (!(status & PHY_ST_AN_OVER)) + return; - /* We are using IEEE 802.3z/D5.0 Table 37-4 */ - switch (aux & PHY_B_AS_PAUSE_MSK) { - case PHY_B_AS_PAUSE_MSK: - skge->flow_control = FLOW_MODE_SYMMETRIC; - break; - case PHY_B_AS_PRR: - skge->flow_control = FLOW_MODE_REM_SEND; - break; - case PHY_B_AS_PRT: - skge->flow_control = FLOW_MODE_LOC_SEND; - break; - default: - skge->flow_control = FLOW_MODE_NONE; - } + lpa = xm_phy_read(hw, port, PHY_XMAC_AUNE_LP); + if (lpa & PHY_B_AN_RF) { + printk(KERN_NOTICE PFX "%s: remote fault\n", + dev->name); + return; + } - skge->speed = SPEED_1000; + aux = xm_phy_read(hw, port, PHY_BCOM_AUX_STAT); + + /* Check Duplex mismatch */ + switch (aux & PHY_B_AS_AN_RES_MSK) { + case PHY_B_RES_1000FD: + skge->duplex = DUPLEX_FULL; + break; + case PHY_B_RES_1000HD: + skge->duplex = DUPLEX_HALF; + break; + default: + printk(KERN_NOTICE PFX "%s: duplex mismatch\n", + dev->name); + return; } - if (!netif_carrier_ok(dev)) - genesis_link_up(skge); + + /* We are using IEEE 802.3z/D5.0 Table 37-4 */ + switch (aux & PHY_B_AS_PAUSE_MSK) { + case PHY_B_AS_PAUSE_MSK: + skge->flow_control = FLOW_MODE_SYMMETRIC; + break; + case PHY_B_AS_PRR: + skge->flow_control = FLOW_MODE_REM_SEND; + break; + case PHY_B_AS_PRT: + skge->flow_control = FLOW_MODE_LOC_SEND; + break; + default: + skge->flow_control = FLOW_MODE_NONE; + } + skge->speed = SPEED_1000; } + + if (!netif_carrier_ok(dev)) + genesis_link_up(skge); } /* Broadcom 5400 only supports giagabit! SysKonnect did not put an additional * Phy on for 100 or 10Mbit operation */ -static void bcom_phy_init(struct skge_port *skge, int jumbo) +static void bcom_phy_init(struct skge_port *skge) { struct skge_hw *hw = skge->hw; int port = skge->port; @@ -1144,7 +1164,7 @@ static void bcom_phy_init(struct skge_port *skge, int jumbo) phy_pause_map[skge->flow_control] | PHY_AN_CSMA); /* Handle Jumbo frames */ - if (jumbo) { + if (hw->dev[port]->mtu > ETH_DATA_LEN) { xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, PHY_B_AC_TX_TST | PHY_B_AC_LONG_PACK); @@ -1157,8 +1177,154 @@ static void bcom_phy_init(struct skge_port *skge, int jumbo) /* Use link status change interrupt */ xm_phy_write(hw, port, PHY_BCOM_INT_MASK, PHY_B_DEF_MSK); +} - bcom_check_link(hw, port); +static void xm_phy_init(struct skge_port *skge) +{ + struct skge_hw *hw = skge->hw; + int port = skge->port; + u16 ctrl = 0; + + if (skge->autoneg == AUTONEG_ENABLE) { + if (skge->advertising & ADVERTISED_1000baseT_Half) + ctrl |= PHY_X_AN_HD; + if (skge->advertising & ADVERTISED_1000baseT_Full) + ctrl |= PHY_X_AN_FD; + + switch(skge->flow_control) { + case FLOW_MODE_NONE: + ctrl |= PHY_X_P_NO_PAUSE; + break; + case FLOW_MODE_LOC_SEND: + ctrl |= PHY_X_P_ASYM_MD; + break; + case FLOW_MODE_SYMMETRIC: + ctrl |= PHY_X_P_BOTH_MD; + break; + } + + xm_phy_write(hw, port, PHY_XMAC_AUNE_ADV, ctrl); + + /* Restart Auto-negotiation */ + ctrl = PHY_CT_ANE | PHY_CT_RE_CFG; + } else { + /* Set DuplexMode in Config register */ + if (skge->duplex == DUPLEX_FULL) + ctrl |= PHY_CT_DUP_MD; + /* + * Do NOT enable Auto-negotiation here. This would hold + * the link down because no IDLEs are transmitted + */ + } + + xm_phy_write(hw, port, PHY_XMAC_CTRL, ctrl); + + /* Poll PHY for status changes */ + schedule_delayed_work(&skge->link_thread, LINK_HZ); +} + +static void xm_check_link(struct net_device *dev) +{ + struct skge_port *skge = netdev_priv(dev); + struct skge_hw *hw = skge->hw; + int port = skge->port; + u16 status; + + /* read twice because of latch */ + (void) xm_phy_read(hw, port, PHY_XMAC_STAT); + status = xm_phy_read(hw, port, PHY_XMAC_STAT); + + if ((status & PHY_ST_LSYNC) == 0) { + u16 cmd = xm_read16(hw, port, XM_MMU_CMD); + cmd &= ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX); + xm_write16(hw, port, XM_MMU_CMD, cmd); + /* dummy read to ensure writing */ + (void) xm_read16(hw, port, XM_MMU_CMD); + + if (netif_carrier_ok(dev)) + skge_link_down(skge); + return; + } + + if (skge->autoneg == AUTONEG_ENABLE) { + u16 lpa, res; + + if (!(status & PHY_ST_AN_OVER)) + return; + + lpa = xm_phy_read(hw, port, PHY_XMAC_AUNE_LP); + if (lpa & PHY_B_AN_RF) { + printk(KERN_NOTICE PFX "%s: remote fault\n", + dev->name); + return; + } + + res = xm_phy_read(hw, port, PHY_XMAC_RES_ABI); + + /* Check Duplex mismatch */ + switch (res & (PHY_X_RS_HD | PHY_X_RS_FD)) { + case PHY_X_RS_FD: + skge->duplex = DUPLEX_FULL; + break; + case PHY_X_RS_HD: + skge->duplex = DUPLEX_HALF; + break; + default: + printk(KERN_NOTICE PFX "%s: duplex mismatch\n", + dev->name); + return; + } + + /* We are using IEEE 802.3z/D5.0 Table 37-4 */ + if (lpa & PHY_X_P_SYM_MD) + skge->flow_control = FLOW_MODE_SYMMETRIC; + else if ((lpa & PHY_X_RS_PAUSE) == PHY_X_P_ASYM_MD) + skge->flow_control = FLOW_MODE_REM_SEND; + else if ((lpa & PHY_X_RS_PAUSE) == PHY_X_P_BOTH_MD) + skge->flow_control = FLOW_MODE_LOC_SEND; + else + skge->flow_control = FLOW_MODE_NONE; + + + skge->speed = SPEED_1000; + } + + if (!netif_carrier_ok(dev)) + genesis_link_up(skge); +} + +/* Poll to check for link coming up. + * Since internal PHY is wired to a level triggered pin, can't + * get an interrupt when carrier is detected. + */ +static void xm_link_timer(void *arg) +{ + struct net_device *dev = arg; + struct skge_port *skge = netdev_priv(arg); + struct skge_hw *hw = skge->hw; + int port = skge->port; + + if (!netif_running(dev)) + return; + + if (netif_carrier_ok(dev)) { + xm_read16(hw, port, XM_ISRC); + if (!(xm_read16(hw, port, XM_ISRC) & XM_IS_INP_ASS)) + goto nochange; + } else { + if (xm_read32(hw, port, XM_GP_PORT) & XM_GP_INP_ASS) + goto nochange; + xm_read16(hw, port, XM_ISRC); + if (xm_read16(hw, port, XM_ISRC) & XM_IS_INP_ASS) + goto nochange; + } + + mutex_lock(&hw->phy_mutex); + xm_check_link(dev); + mutex_unlock(&hw->phy_mutex); + +nochange: + schedule_delayed_work(&skge->link_thread, LINK_HZ); } static void genesis_mac_init(struct skge_hw *hw, int port) @@ -1189,20 +1355,29 @@ static void genesis_mac_init(struct skge_hw *hw, int port) * namely for the 1000baseTX cards that use the XMAC's * GMII mode. */ - /* Take external Phy out of reset */ - r = skge_read32(hw, B2_GP_IO); - if (port == 0) - r |= GP_DIR_0|GP_IO_0; - else - r |= GP_DIR_2|GP_IO_2; + if (hw->phy_type != SK_PHY_XMAC) { + /* Take external Phy out of reset */ + r = skge_read32(hw, B2_GP_IO); + if (port == 0) + r |= GP_DIR_0|GP_IO_0; + else + r |= GP_DIR_2|GP_IO_2; - skge_write32(hw, B2_GP_IO, r); + skge_write32(hw, B2_GP_IO, r); + /* Enable GMII interface */ + xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD); + } - /* Enable GMII interface */ - xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD); - bcom_phy_init(skge, jumbo); + switch(hw->phy_type) { + case SK_PHY_XMAC: + xm_phy_init(skge); + break; + case SK_PHY_BCOM: + bcom_phy_init(skge); + bcom_check_link(hw, port); + } /* Set Station Address */ xm_outaddr(hw, port, XM_SA, dev->dev_addr); @@ -1335,16 +1510,18 @@ static void genesis_stop(struct skge_port *skge) skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_SET_MAC_RST); /* For external PHYs there must be special handling */ - reg = skge_read32(hw, B2_GP_IO); - if (port == 0) { - reg |= GP_DIR_0; - reg &= ~GP_IO_0; - } else { - reg |= GP_DIR_2; - reg &= ~GP_IO_2; + if (hw->phy_type != SK_PHY_XMAC) { + reg = skge_read32(hw, B2_GP_IO); + if (port == 0) { + reg |= GP_DIR_0; + reg &= ~GP_IO_0; + } else { + reg |= GP_DIR_2; + reg &= ~GP_IO_2; + } + skge_write32(hw, B2_GP_IO, reg); + skge_read32(hw, B2_GP_IO); } - skge_write32(hw, B2_GP_IO, reg); - skge_read32(hw, B2_GP_IO); xm_write16(hw, port, XM_MMU_CMD, xm_read16(hw, port, XM_MMU_CMD) @@ -1406,7 +1583,7 @@ static void genesis_link_up(struct skge_port *skge) struct skge_hw *hw = skge->hw; int port = skge->port; u16 cmd; - u32 mode, msk; + u32 mode; cmd = xm_read16(hw, port, XM_MMU_CMD); @@ -1454,27 +1631,24 @@ static void genesis_link_up(struct skge_port *skge) } xm_write32(hw, port, XM_MODE, mode); - - msk = XM_DEF_MSK; - /* disable GP0 interrupt bit for external Phy */ - msk |= XM_IS_INP_ASS; - - xm_write16(hw, port, XM_IMSK, msk); + xm_write16(hw, port, XM_IMSK, XM_DEF_MSK); xm_read16(hw, port, XM_ISRC); /* get MMU Command Reg. */ cmd = xm_read16(hw, port, XM_MMU_CMD); - if (skge->duplex == DUPLEX_FULL) + if (hw->phy_type != SK_PHY_XMAC && skge->duplex == DUPLEX_FULL) cmd |= XM_MMU_GMII_FD; /* * Workaround BCOM Errata (#10523) for all BCom Phys * Enable Power Management after link up */ - xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, - xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL) - & ~PHY_B_AC_DIS_PM); - xm_phy_write(hw, port, PHY_BCOM_INT_MASK, PHY_B_DEF_MSK); + if (hw->phy_type == SK_PHY_BCOM) { + xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, + xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL) + & ~PHY_B_AC_DIS_PM); + xm_phy_write(hw, port, PHY_BCOM_INT_MASK, PHY_B_DEF_MSK); + } /* enable Rx/Tx */ xm_write16(hw, port, XM_MMU_CMD, @@ -2240,6 +2414,8 @@ static int skge_down(struct net_device *dev) printk(KERN_INFO PFX "%s: disabling interface\n", dev->name); netif_stop_queue(dev); + if (hw->chip_id == CHIP_ID_GENESIS && hw->phy_type == SK_PHY_XMAC) + cancel_rearming_delayed_work(&skge->link_thread); skge_write8(skge->hw, SK_REG(skge->port, LNK_LED_REG), LED_OFF); if (hw->chip_id == CHIP_ID_GENESIS) @@ -2862,7 +3038,7 @@ static void skge_extirq(void *arg) if (netif_running(dev)) { if (hw->chip_id != CHIP_ID_GENESIS) yukon_phy_intr(skge); - else + else if (hw->phy_type == SK_PHY_BCOM) bcom_phy_intr(skge); } } @@ -3014,7 +3190,7 @@ static int skge_reset(struct skge_hw *hw) { u32 reg; u16 ctst, pci_status; - u8 t8, mac_cfg, pmd_type, phy_type; + u8 t8, mac_cfg, pmd_type; int i; ctst = skge_read16(hw, B0_CTST); @@ -3038,19 +3214,22 @@ static int skge_reset(struct skge_hw *hw) ctst & (CS_CLK_RUN_HOT|CS_CLK_RUN_RST|CS_CLK_RUN_ENA)); hw->chip_id = skge_read8(hw, B2_CHIP_ID); - phy_type = skge_read8(hw, B2_E_1) & 0xf; + hw->phy_type = skge_read8(hw, B2_E_1) & 0xf; pmd_type = skge_read8(hw, B2_PMD_TYP); hw->copper = (pmd_type == 'T' || pmd_type == '1'); switch (hw->chip_id) { case CHIP_ID_GENESIS: - switch (phy_type) { + switch (hw->phy_type) { + case SK_PHY_XMAC: + hw->phy_addr = PHY_ADDR_XMAC; + break; case SK_PHY_BCOM: hw->phy_addr = PHY_ADDR_BCOM; break; default: printk(KERN_ERR PFX "%s: unsupported phy type 0x%x\n", - pci_name(hw->pdev), phy_type); + pci_name(hw->pdev), hw->phy_type); return -EOPNOTSUPP; } break; @@ -3058,7 +3237,7 @@ static int skge_reset(struct skge_hw *hw) case CHIP_ID_YUKON: case CHIP_ID_YUKON_LITE: case CHIP_ID_YUKON_LP: - if (phy_type < SK_PHY_MARV_COPPER && pmd_type != 'S') + if (hw->phy_type < SK_PHY_MARV_COPPER && pmd_type != 'S') hw->copper = 1; hw->phy_addr = PHY_ADDR_MARV; @@ -3089,10 +3268,13 @@ static int skge_reset(struct skge_hw *hw) else hw->ram_size = t8 * 4096; - hw->intr_mask = IS_HW_ERR | IS_EXT_REG | IS_PORT_1; + hw->intr_mask = IS_HW_ERR | IS_PORT_1; if (hw->ports > 1) hw->intr_mask |= IS_PORT_2; + if (!(hw->chip_id == CHIP_ID_GENESIS && hw->phy_type == SK_PHY_XMAC)) + hw->intr_mask |= IS_EXT_REG; + if (hw->chip_id == CHIP_ID_GENESIS) genesis_init(hw); else { @@ -3226,6 +3408,9 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port, skge->port = port; + /* Only used for Genesis XMAC */ + INIT_WORK(&skge->link_thread, xm_link_timer, dev); + if (hw->chip_id != CHIP_ID_GENESIS) { dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG; skge->rx_csum = 1; diff --git a/drivers/net/skge.h b/drivers/net/skge.h index 79e09271bcf..d0b47d46cf9 100644 --- a/drivers/net/skge.h +++ b/drivers/net/skge.h @@ -934,7 +934,7 @@ enum { PHY_XMAC_AUNE_ADV = 0x04,/* 16 bit r/w Auto-Neg. Advertisement */ PHY_XMAC_AUNE_LP = 0x05,/* 16 bit r/o Link Partner Abi Reg */ PHY_XMAC_AUNE_EXP = 0x06,/* 16 bit r/o Auto-Neg. Expansion Reg */ - PHY_XMAC_NEPG = 0x07,/* 16 bit r/w Next Page Register */ + PHY_XMAC_NEPG = 0x07,/* 16 bit r/w Next Page Register */ PHY_XMAC_NEPG_LP = 0x08,/* 16 bit r/o Next Page Link Partner */ PHY_XMAC_EXT_STAT = 0x0f,/* 16 bit r/o Ext Status Register */ @@ -1097,13 +1097,36 @@ enum { /* Pause Bits (PHY_X_AN_PAUSE and PHY_X_RS_PAUSE) encoding */ enum { - PHY_X_P_NO_PAUSE = 0<<7,/* Bit 8..7: no Pause Mode */ + PHY_X_P_NO_PAUSE= 0<<7,/* Bit 8..7: no Pause Mode */ PHY_X_P_SYM_MD = 1<<7, /* Bit 8..7: symmetric Pause Mode */ PHY_X_P_ASYM_MD = 2<<7,/* Bit 8..7: asymmetric Pause Mode */ PHY_X_P_BOTH_MD = 3<<7,/* Bit 8..7: both Pause Mode */ }; +/***** PHY_XMAC_EXT_STAT 16 bit r/w Extended Status Register *****/ +enum { + PHY_X_EX_FD = 1<<15, /* Bit 15: Device Supports Full Duplex */ + PHY_X_EX_HD = 1<<14, /* Bit 14: Device Supports Half Duplex */ +}; + +/***** PHY_XMAC_RES_ABI 16 bit r/o PHY Resolved Ability *****/ +enum { + PHY_X_RS_PAUSE = 3<<7, /* Bit 8..7: selected Pause Mode */ + PHY_X_RS_HD = 1<<6, /* Bit 6: Half Duplex Mode selected */ + PHY_X_RS_FD = 1<<5, /* Bit 5: Full Duplex Mode selected */ + PHY_X_RS_ABLMIS = 1<<4, /* Bit 4: duplex or pause cap mismatch */ + PHY_X_RS_PAUMIS = 1<<3, /* Bit 3: pause capability mismatch */ +}; + +/* Remote Fault Bits (PHY_X_AN_RFB) encoding */ +enum { + X_RFB_OK = 0<<12,/* Bit 13..12 No errors, Link OK */ + X_RFB_LF = 1<<12,/* Bit 13..12 Link Failure */ + X_RFB_OFF = 2<<12,/* Bit 13..12 Offline */ + X_RFB_AN_ERR = 3<<12,/* Bit 13..12 Auto-Negotiation Error */ +}; + /* Broadcom-Specific */ /***** PHY_BCOM_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ enum { @@ -2158,8 +2181,8 @@ enum { XM_IS_LNK_AE = 1<<14, /* Bit 14: Link Asynchronous Event */ XM_IS_TX_ABORT = 1<<13, /* Bit 13: Transmit Abort, late Col. etc */ XM_IS_FRC_INT = 1<<12, /* Bit 12: Force INT bit set in GP */ - XM_IS_INP_ASS = 1<<11, /* Bit 11: Input Asserted, GP bit 0 set */ - XM_IS_LIPA_RC = 1<<10, /* Bit 10: Link Partner requests config */ + XM_IS_INP_ASS = 1<<11, /* Bit 11: Input Asserted, GP bit 0 set */ + XM_IS_LIPA_RC = 1<<10, /* Bit 10: Link Partner requests config */ XM_IS_RX_PAGE = 1<<9, /* Bit 9: Page Received */ XM_IS_TX_PAGE = 1<<8, /* Bit 8: Next Page Loaded for Transmit */ XM_IS_AND = 1<<7, /* Bit 7: Auto-Negotiation Done */ @@ -2172,9 +2195,7 @@ enum { XM_IS_RX_COMP = 1<<0, /* Bit 0: Frame Rx Complete */ }; -#define XM_DEF_MSK (~(XM_IS_INP_ASS | XM_IS_LIPA_RC | XM_IS_RX_PAGE | \ - XM_IS_AND | XM_IS_RXC_OV | XM_IS_TXC_OV | \ - XM_IS_RXF_OV | XM_IS_TXF_UR)) +#define XM_DEF_MSK (~(XM_IS_RXC_OV | XM_IS_TXC_OV | XM_IS_RXF_OV | XM_IS_TXF_UR)) /* XM_HW_CFG 16 bit r/w Hardware Config Register */ @@ -2396,6 +2417,7 @@ struct skge_hw { u8 chip_rev; u8 copper; u8 ports; + u8 phy_type; u32 ram_size; u32 ram_offset; @@ -2422,6 +2444,7 @@ struct skge_port { struct net_device_stats net_stats; + struct work_struct link_thread; u8 rx_csum; u8 blink_on; u8 flow_control; diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 7eeefa2d6c8..396e7df3c61 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -50,19 +50,18 @@ #include "sky2.h" #define DRV_NAME "sky2" -#define DRV_VERSION "1.7" +#define DRV_VERSION "1.9" #define PFX DRV_NAME " " /* * The Yukon II chipset takes 64 bit command blocks (called list elements) * that are organized into three (receive, transmit, status) different rings - * similar to Tigon3. A transmit can require several elements; - * a receive requires one (or two if using 64 bit dma). + * similar to Tigon3. */ -#define RX_LE_SIZE 512 +#define RX_LE_SIZE 1024 #define RX_LE_BYTES (RX_LE_SIZE*sizeof(struct sky2_rx_le)) -#define RX_MAX_PENDING (RX_LE_SIZE/2 - 2) +#define RX_MAX_PENDING (RX_LE_SIZE/6 - 2) #define RX_DEF_PENDING RX_MAX_PENDING #define RX_SKB_ALIGN 8 #define RX_BUF_WRITE 16 @@ -74,7 +73,6 @@ #define STATUS_RING_SIZE 2048 /* 2 ports * (TX + 2*RX) */ #define STATUS_LE_BYTES (STATUS_RING_SIZE*sizeof(struct sky2_status_le)) -#define ETH_JUMBO_MTU 9000 #define TX_WATCHDOG (5 * HZ) #define NAPI_WEIGHT 64 #define PHY_RETRIES 1000 @@ -90,7 +88,7 @@ static int debug = -1; /* defaults above */ module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); -static int copybreak __read_mostly = 256; +static int copybreak __read_mostly = 128; module_param(copybreak, int, 0); MODULE_PARM_DESC(copybreak, "Receive copy threshold"); @@ -769,9 +767,16 @@ static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2) struct sky2_tx_le *le = sky2->tx_le + sky2->tx_prod; sky2->tx_prod = RING_NEXT(sky2->tx_prod, TX_RING_SIZE); + le->ctrl = 0; return le; } +static inline struct tx_ring_info *tx_le_re(struct sky2_port *sky2, + struct sky2_tx_le *le) +{ + return sky2->tx_ring + (le - sky2->tx_le); +} + /* Update chip's next pointer */ static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, u16 idx) { @@ -786,6 +791,7 @@ static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2) { struct sky2_rx_le *le = sky2->rx_le + sky2->rx_put; sky2->rx_put = RING_NEXT(sky2->rx_put, RX_LE_SIZE); + le->ctrl = 0; return le; } @@ -795,17 +801,16 @@ static inline u32 high32(dma_addr_t a) return sizeof(a) > sizeof(u32) ? (a >> 16) >> 16 : 0; } -/* Build description to hardware about buffer */ -static void sky2_rx_add(struct sky2_port *sky2, dma_addr_t map) +/* Build description to hardware for one receive segment */ +static void sky2_rx_add(struct sky2_port *sky2, u8 op, + dma_addr_t map, unsigned len) { struct sky2_rx_le *le; u32 hi = high32(map); - u16 len = sky2->rx_bufsize; if (sky2->rx_addr64 != hi) { le = sky2_next_rx(sky2); le->addr = cpu_to_le32(hi); - le->ctrl = 0; le->opcode = OP_ADDR64 | HW_OWNER; sky2->rx_addr64 = high32(map + len); } @@ -813,11 +818,53 @@ static void sky2_rx_add(struct sky2_port *sky2, dma_addr_t map) le = sky2_next_rx(sky2); le->addr = cpu_to_le32((u32) map); le->length = cpu_to_le16(len); - le->ctrl = 0; - le->opcode = OP_PACKET | HW_OWNER; + le->opcode = op | HW_OWNER; +} + +/* Build description to hardware for one possibly fragmented skb */ +static void sky2_rx_submit(struct sky2_port *sky2, + const struct rx_ring_info *re) +{ + int i; + + sky2_rx_add(sky2, OP_PACKET, re->data_addr, sky2->rx_data_size); + + for (i = 0; i < skb_shinfo(re->skb)->nr_frags; i++) + sky2_rx_add(sky2, OP_BUFFER, re->frag_addr[i], PAGE_SIZE); } +static void sky2_rx_map_skb(struct pci_dev *pdev, struct rx_ring_info *re, + unsigned size) +{ + struct sk_buff *skb = re->skb; + int i; + + re->data_addr = pci_map_single(pdev, skb->data, size, PCI_DMA_FROMDEVICE); + pci_unmap_len_set(re, data_size, size); + + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) + re->frag_addr[i] = pci_map_page(pdev, + skb_shinfo(skb)->frags[i].page, + skb_shinfo(skb)->frags[i].page_offset, + skb_shinfo(skb)->frags[i].size, + PCI_DMA_FROMDEVICE); +} + +static void sky2_rx_unmap_skb(struct pci_dev *pdev, struct rx_ring_info *re) +{ + struct sk_buff *skb = re->skb; + int i; + + pci_unmap_single(pdev, re->data_addr, pci_unmap_len(re, data_size), + PCI_DMA_FROMDEVICE); + + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) + pci_unmap_page(pdev, re->frag_addr[i], + skb_shinfo(skb)->frags[i].size, + PCI_DMA_FROMDEVICE); +} + /* Tell chip where to start receive checksum. * Actually has two checksums, but set both same to avoid possible byte * order problems. @@ -877,12 +924,10 @@ static void sky2_rx_clean(struct sky2_port *sky2) memset(sky2->rx_le, 0, RX_LE_BYTES); for (i = 0; i < sky2->rx_pending; i++) { - struct ring_info *re = sky2->rx_ring + i; + struct rx_ring_info *re = sky2->rx_ring + i; if (re->skb) { - pci_unmap_single(sky2->hw->pdev, - re->mapaddr, sky2->rx_bufsize, - PCI_DMA_FROMDEVICE); + sky2_rx_unmap_skb(sky2->hw->pdev, re); kfree_skb(re->skb); re->skb = NULL; } @@ -936,13 +981,13 @@ static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp struct sky2_hw *hw = sky2->hw; u16 port = sky2->port; - spin_lock_bh(&sky2->tx_lock); + netif_tx_lock_bh(dev); sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), RX_VLAN_STRIP_ON); sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_VLAN_TAG_ON); sky2->vlgrp = grp; - spin_unlock_bh(&sky2->tx_lock); + netif_tx_unlock_bh(dev); } static void sky2_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) @@ -951,50 +996,69 @@ static void sky2_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) struct sky2_hw *hw = sky2->hw; u16 port = sky2->port; - spin_lock_bh(&sky2->tx_lock); + netif_tx_lock_bh(dev); sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), RX_VLAN_STRIP_OFF); sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_VLAN_TAG_OFF); if (sky2->vlgrp) sky2->vlgrp->vlan_devices[vid] = NULL; - spin_unlock_bh(&sky2->tx_lock); + netif_tx_unlock_bh(dev); } #endif /* + * Allocate an skb for receiving. If the MTU is large enough + * make the skb non-linear with a fragment list of pages. + * * It appears the hardware has a bug in the FIFO logic that * cause it to hang if the FIFO gets overrun and the receive buffer * is not 64 byte aligned. The buffer returned from netdev_alloc_skb is * aligned except if slab debugging is enabled. */ -static inline struct sk_buff *sky2_alloc_skb(struct net_device *dev, - unsigned int length, - gfp_t gfp_mask) +static struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2) { struct sk_buff *skb; + unsigned long p; + int i; - skb = __netdev_alloc_skb(dev, length + RX_SKB_ALIGN, gfp_mask); - if (likely(skb)) { - unsigned long p = (unsigned long) skb->data; - skb_reserve(skb, ALIGN(p, RX_SKB_ALIGN) - p); + skb = netdev_alloc_skb(sky2->netdev, sky2->rx_data_size + RX_SKB_ALIGN); + if (!skb) + goto nomem; + + p = (unsigned long) skb->data; + skb_reserve(skb, ALIGN(p, RX_SKB_ALIGN) - p); + + for (i = 0; i < sky2->rx_nfrags; i++) { + struct page *page = alloc_page(GFP_ATOMIC); + + if (!page) + goto free_partial; + skb_fill_page_desc(skb, i, page, 0, PAGE_SIZE); } return skb; +free_partial: + kfree_skb(skb); +nomem: + return NULL; } /* * Allocate and setup receiver buffer pool. - * In case of 64 bit dma, there are 2X as many list elements - * available as ring entries - * and need to reserve one list element so we don't wrap around. + * Normal case this ends up creating one list element for skb + * in the receive ring. Worst case if using large MTU and each + * allocation falls on a different 64 bit region, that results + * in 6 list elements per ring entry. + * One element is used for checksum enable/disable, and one + * extra to avoid wrap. */ static int sky2_rx_start(struct sky2_port *sky2) { struct sky2_hw *hw = sky2->hw; + struct rx_ring_info *re; unsigned rxq = rxqaddr[sky2->port]; - int i; - unsigned thresh; + unsigned i, size, space, thresh; sky2->rx_put = sky2->rx_next = 0; sky2_qset(hw, rxq); @@ -1007,27 +1071,56 @@ static int sky2_rx_start(struct sky2_port *sky2) sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1); rx_set_checksum(sky2); + + /* Space needed for frame data + headers rounded up */ + size = ALIGN(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8) + + 8; + + /* Stopping point for hardware truncation */ + thresh = (size - 8) / sizeof(u32); + + /* Account for overhead of skb - to avoid order > 0 allocation */ + space = SKB_DATA_ALIGN(size) + NET_SKB_PAD + + sizeof(struct skb_shared_info); + + sky2->rx_nfrags = space >> PAGE_SHIFT; + BUG_ON(sky2->rx_nfrags > ARRAY_SIZE(re->frag_addr)); + + if (sky2->rx_nfrags != 0) { + /* Compute residue after pages */ + space = sky2->rx_nfrags << PAGE_SHIFT; + + if (space < size) + size -= space; + else + size = 0; + + /* Optimize to handle small packets and headers */ + if (size < copybreak) + size = copybreak; + if (size < ETH_HLEN) + size = ETH_HLEN; + } + sky2->rx_data_size = size; + + /* Fill Rx ring */ for (i = 0; i < sky2->rx_pending; i++) { - struct ring_info *re = sky2->rx_ring + i; + re = sky2->rx_ring + i; - re->skb = sky2_alloc_skb(sky2->netdev, sky2->rx_bufsize, - GFP_KERNEL); + re->skb = sky2_rx_alloc(sky2); if (!re->skb) goto nomem; - re->mapaddr = pci_map_single(hw->pdev, re->skb->data, - sky2->rx_bufsize, PCI_DMA_FROMDEVICE); - sky2_rx_add(sky2, re->mapaddr); + sky2_rx_map_skb(hw->pdev, re, sky2->rx_data_size); + sky2_rx_submit(sky2, re); } - /* * The receiver hangs if it receives frames larger than the * packet buffer. As a workaround, truncate oversize frames, but * the register is limited to 9 bits, so if you do frames > 2052 * you better get the MTU right! */ - thresh = (sky2->rx_bufsize - 8) / sizeof(u32); if (thresh > 0x1ff) sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_OFF); else { @@ -1035,7 +1128,6 @@ static int sky2_rx_start(struct sky2_port *sky2) sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON); } - /* Tell chip about available buffers */ sky2_write16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX), sky2->rx_put); return 0; @@ -1094,7 +1186,7 @@ static int sky2_up(struct net_device *dev) goto err_out; memset(sky2->rx_le, 0, RX_LE_BYTES); - sky2->rx_ring = kcalloc(sky2->rx_pending, sizeof(struct ring_info), + sky2->rx_ring = kcalloc(sky2->rx_pending, sizeof(struct rx_ring_info), GFP_KERNEL); if (!sky2->rx_ring) goto err_out; @@ -1124,7 +1216,8 @@ static int sky2_up(struct net_device *dev) sky2_qset(hw, txqaddr[port]); /* Set almost empty threshold */ - if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev == 1) + if (hw->chip_id == CHIP_ID_YUKON_EC_U + && hw->chip_rev == CHIP_REV_YU_EC_U_A0) sky2_write16(hw, Q_ADDR(txqaddr[port], Q_AL), 0x1a0); sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map, @@ -1195,8 +1288,6 @@ static unsigned tx_le_req(const struct sk_buff *skb) * A single packet can generate multiple list elements, and * the number of ring elements will probably be less than the number * of list elements used. - * - * No BH disabling for tx_lock here (like tg3) */ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) { @@ -1210,27 +1301,8 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) u16 mss; u8 ctrl; - /* No BH disabling for tx_lock here. We are running in BH disabled - * context and TX reclaim runs via poll inside of a software - * interrupt, and no related locks in IRQ processing. - */ - if (!spin_trylock(&sky2->tx_lock)) - return NETDEV_TX_LOCKED; - - if (unlikely(tx_avail(sky2) < tx_le_req(skb))) { - /* There is a known but harmless race with lockless tx - * and netif_stop_queue. - */ - if (!netif_queue_stopped(dev)) { - netif_stop_queue(dev); - if (net_ratelimit()) - printk(KERN_WARNING PFX "%s: ring full when queue awake!\n", - dev->name); - } - spin_unlock(&sky2->tx_lock); - - return NETDEV_TX_BUSY; - } + if (unlikely(tx_avail(sky2) < tx_le_req(skb))) + return NETDEV_TX_BUSY; if (unlikely(netif_msg_tx_queued(sky2))) printk(KERN_DEBUG "%s: tx queued, slot %u, len %d\n", @@ -1240,13 +1312,10 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) mapping = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE); addr64 = high32(mapping); - re = sky2->tx_ring + sky2->tx_prod; - /* Send high bits if changed or crosses boundary */ if (addr64 != sky2->tx_addr64 || high32(mapping + len) != sky2->tx_addr64) { le = get_tx_le(sky2); le->addr = cpu_to_le32(addr64); - le->ctrl = 0; le->opcode = OP_ADDR64 | HW_OWNER; sky2->tx_addr64 = high32(mapping + len); } @@ -1262,7 +1331,6 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) le = get_tx_le(sky2); le->addr = cpu_to_le32(mss); le->opcode = OP_LRGLEN | HW_OWNER; - le->ctrl = 0; sky2->tx_last_mss = mss; } } @@ -1275,7 +1343,6 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) le = get_tx_le(sky2); le->addr = 0; le->opcode = OP_VLAN|HW_OWNER; - le->ctrl = 0; } else le->opcode |= OP_VLAN; le->length = cpu_to_be16(vlan_tx_tag_get(skb)); @@ -1312,13 +1379,13 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) le->ctrl = ctrl; le->opcode = mss ? (OP_LARGESEND | HW_OWNER) : (OP_PACKET | HW_OWNER); - /* Record the transmit mapping info */ + re = tx_le_re(sky2, le); re->skb = skb; pci_unmap_addr_set(re, mapaddr, mapping); + pci_unmap_len_set(re, maplen, len); for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { - skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; - struct tx_ring_info *fre; + const skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; mapping = pci_map_page(hw->pdev, frag->page, frag->page_offset, frag->size, PCI_DMA_TODEVICE); @@ -1337,12 +1404,12 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) le->ctrl = ctrl; le->opcode = OP_BUFFER | HW_OWNER; - fre = sky2->tx_ring - + RING_NEXT((re - sky2->tx_ring) + i, TX_RING_SIZE); - pci_unmap_addr_set(fre, mapaddr, mapping); + re = tx_le_re(sky2, le); + re->skb = skb; + pci_unmap_addr_set(re, mapaddr, mapping); + pci_unmap_len_set(re, maplen, frag->size); } - re->idx = sky2->tx_prod; le->ctrl |= EOP; if (tx_avail(sky2) <= MAX_SKB_TX_LE) @@ -1350,8 +1417,6 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) sky2_put_idx(hw, txqaddr[sky2->port], sky2->tx_prod); - spin_unlock(&sky2->tx_lock); - dev->trans_start = jiffies; return NETDEV_TX_OK; } @@ -1360,59 +1425,59 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev) * Free ring elements from starting at tx_cons until "done" * * NB: the hardware will tell us about partial completion of multi-part - * buffers; these are deferred until completion. + * buffers so make sure not to free skb to early. */ static void sky2_tx_complete(struct sky2_port *sky2, u16 done) { struct net_device *dev = sky2->netdev; struct pci_dev *pdev = sky2->hw->pdev; - u16 nxt, put; - unsigned i; + unsigned idx; BUG_ON(done >= TX_RING_SIZE); - if (unlikely(netif_msg_tx_done(sky2))) - printk(KERN_DEBUG "%s: tx done, up to %u\n", - dev->name, done); - - for (put = sky2->tx_cons; put != done; put = nxt) { - struct tx_ring_info *re = sky2->tx_ring + put; - struct sk_buff *skb = re->skb; - - nxt = re->idx; - BUG_ON(nxt >= TX_RING_SIZE); - prefetch(sky2->tx_ring + nxt); - - /* Check for partial status */ - if (tx_dist(put, done) < tx_dist(put, nxt)) + for (idx = sky2->tx_cons; idx != done; + idx = RING_NEXT(idx, TX_RING_SIZE)) { + struct sky2_tx_le *le = sky2->tx_le + idx; + struct tx_ring_info *re = sky2->tx_ring + idx; + + switch(le->opcode & ~HW_OWNER) { + case OP_LARGESEND: + case OP_PACKET: + pci_unmap_single(pdev, + pci_unmap_addr(re, mapaddr), + pci_unmap_len(re, maplen), + PCI_DMA_TODEVICE); break; - - skb = re->skb; - pci_unmap_single(pdev, pci_unmap_addr(re, mapaddr), - skb_headlen(skb), PCI_DMA_TODEVICE); - - for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { - struct tx_ring_info *fre; - fre = sky2->tx_ring + RING_NEXT(put + i, TX_RING_SIZE); - pci_unmap_page(pdev, pci_unmap_addr(fre, mapaddr), - skb_shinfo(skb)->frags[i].size, + case OP_BUFFER: + pci_unmap_page(pdev, pci_unmap_addr(re, mapaddr), + pci_unmap_len(re, maplen), PCI_DMA_TODEVICE); + break; } - dev_kfree_skb(skb); + if (le->ctrl & EOP) { + if (unlikely(netif_msg_tx_done(sky2))) + printk(KERN_DEBUG "%s: tx done %u\n", + dev->name, idx); + dev_kfree_skb(re->skb); + } + + le->opcode = 0; /* paranoia */ } - sky2->tx_cons = put; + sky2->tx_cons = idx; if (tx_avail(sky2) > MAX_SKB_TX_LE + 4) netif_wake_queue(dev); } /* Cleanup all untransmitted buffers, assume transmitter not running */ -static void sky2_tx_clean(struct sky2_port *sky2) +static void sky2_tx_clean(struct net_device *dev) { - spin_lock_bh(&sky2->tx_lock); + struct sky2_port *sky2 = netdev_priv(dev); + + netif_tx_lock_bh(dev); sky2_tx_complete(sky2, sky2->tx_prod); - spin_unlock_bh(&sky2->tx_lock); + netif_tx_unlock_bh(dev); } /* Network shutdown */ @@ -1443,6 +1508,13 @@ static int sky2_down(struct net_device *dev) sky2_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET | RB_DIS_OP_MD); + /* WA for dev. #4.209 */ + if (hw->chip_id == CHIP_ID_YUKON_EC_U + && hw->chip_rev == CHIP_REV_YU_EC_U_A1) + sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), + sky2->speed != SPEED_1000 ? + TX_STFW_ENA : TX_STFW_DIS); + ctrl = gma_read16(hw, port, GM_GP_CTRL); ctrl &= ~(GM_GPCR_TX_ENA | GM_GPCR_RX_ENA); gma_write16(hw, port, GM_GP_CTRL, ctrl); @@ -1489,7 +1561,7 @@ static int sky2_down(struct net_device *dev) synchronize_irq(hw->pdev->irq); - sky2_tx_clean(sky2); + sky2_tx_clean(dev); sky2_rx_clean(sky2); pci_free_consistent(hw->pdev, RX_LE_BYTES, @@ -1624,22 +1696,33 @@ static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux) return -1; } - if (hw->chip_id != CHIP_ID_YUKON_FE && - gm_phy_read(hw, port, PHY_MARV_1000T_STAT) & PHY_B_1000S_MSF) { - printk(KERN_ERR PFX "%s: master/slave fault", - sky2->netdev->name); - return -1; - } - if (!(aux & PHY_M_PS_SPDUP_RES)) { printk(KERN_ERR PFX "%s: speed/duplex mismatch", sky2->netdev->name); return -1; } - sky2->duplex = (aux & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF; - sky2->speed = sky2_phy_speed(hw, aux); + if (sky2->speed == SPEED_1000) { + u16 ctl2 = gm_phy_read(hw, port, PHY_MARV_1000T_CTRL); + u16 lpa2 = gm_phy_read(hw, port, PHY_MARV_1000T_STAT); + if (lpa2 & PHY_B_1000S_MSF) { + printk(KERN_ERR PFX "%s: master/slave fault", + sky2->netdev->name); + return -1; + } + + if ((ctl2 & PHY_M_1000C_AFD) && (lpa2 & PHY_B_1000S_LP_FD)) + sky2->duplex = DUPLEX_FULL; + else + sky2->duplex = DUPLEX_HALF; + } else { + u16 adv = gm_phy_read(hw, port, PHY_MARV_AUNE_ADV); + if ((aux & adv) & PHY_AN_FULL) + sky2->duplex = DUPLEX_FULL; + else + sky2->duplex = DUPLEX_HALF; + } /* Pause bits are offset (9..8) */ if (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U) @@ -1730,31 +1813,22 @@ static void sky2_tx_timeout(struct net_device *dev) } else if (report != sky2->tx_cons) { printk(KERN_INFO PFX "status report lost?\n"); - spin_lock_bh(&sky2->tx_lock); + netif_tx_lock_bh(dev); sky2_tx_complete(sky2, report); - spin_unlock_bh(&sky2->tx_lock); + netif_tx_unlock_bh(dev); } else { printk(KERN_INFO PFX "hardware hung? flushing\n"); sky2_write32(hw, Q_ADDR(txq, Q_CSR), BMU_STOP); sky2_write32(hw, Y2_QADDR(txq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET); - sky2_tx_clean(sky2); + sky2_tx_clean(dev); sky2_qset(hw, txq); sky2_prefetch_init(hw, txq, sky2->tx_le_map, TX_RING_SIZE - 1); } } - -/* Want receive buffer size to be multiple of 64 bits - * and incl room for vlan and truncation - */ -static inline unsigned sky2_buf_size(int mtu) -{ - return ALIGN(mtu + ETH_HLEN + VLAN_HLEN, 8) + 8; -} - static int sky2_change_mtu(struct net_device *dev, int new_mtu) { struct sky2_port *sky2 = netdev_priv(dev); @@ -1789,7 +1863,7 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) sky2_rx_clean(sky2); dev->mtu = new_mtu; - sky2->rx_bufsize = sky2_buf_size(new_mtu); + mode = DATA_BLIND_VAL(DATA_BLIND_DEF) | GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF); @@ -1815,16 +1889,100 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) return err; } +/* For small just reuse existing skb for next receive */ +static struct sk_buff *receive_copy(struct sky2_port *sky2, + const struct rx_ring_info *re, + unsigned length) +{ + struct sk_buff *skb; + + skb = netdev_alloc_skb(sky2->netdev, length + 2); + if (likely(skb)) { + skb_reserve(skb, 2); + pci_dma_sync_single_for_cpu(sky2->hw->pdev, re->data_addr, + length, PCI_DMA_FROMDEVICE); + memcpy(skb->data, re->skb->data, length); + skb->ip_summed = re->skb->ip_summed; + skb->csum = re->skb->csum; + pci_dma_sync_single_for_device(sky2->hw->pdev, re->data_addr, + length, PCI_DMA_FROMDEVICE); + re->skb->ip_summed = CHECKSUM_NONE; + __skb_put(skb, length); + } + return skb; +} + +/* Adjust length of skb with fragments to match received data */ +static void skb_put_frags(struct sk_buff *skb, unsigned int hdr_space, + unsigned int length) +{ + int i, num_frags; + unsigned int size; + + /* put header into skb */ + size = min(length, hdr_space); + skb->tail += size; + skb->len += size; + length -= size; + + num_frags = skb_shinfo(skb)->nr_frags; + for (i = 0; i < num_frags; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + + if (length == 0) { + /* don't need this page */ + __free_page(frag->page); + --skb_shinfo(skb)->nr_frags; + } else { + size = min(length, (unsigned) PAGE_SIZE); + + frag->size = size; + skb->data_len += size; + skb->truesize += size; + skb->len += size; + length -= size; + } + } +} + +/* Normal packet - take skb from ring element and put in a new one */ +static struct sk_buff *receive_new(struct sky2_port *sky2, + struct rx_ring_info *re, + unsigned int length) +{ + struct sk_buff *skb, *nskb; + unsigned hdr_space = sky2->rx_data_size; + + pr_debug(PFX "receive new length=%d\n", length); + + /* Don't be tricky about reusing pages (yet) */ + nskb = sky2_rx_alloc(sky2); + if (unlikely(!nskb)) + return NULL; + + skb = re->skb; + sky2_rx_unmap_skb(sky2->hw->pdev, re); + + prefetch(skb->data); + re->skb = nskb; + sky2_rx_map_skb(sky2->hw->pdev, re, hdr_space); + + if (skb_shinfo(skb)->nr_frags) + skb_put_frags(skb, hdr_space, length); + else + skb_put(skb, hdr_space); + return skb; +} + /* * Receive one packet. - * For small packets or errors, just reuse existing skb. * For larger packets, get new buffer. */ static struct sk_buff *sky2_receive(struct net_device *dev, u16 length, u32 status) { struct sky2_port *sky2 = netdev_priv(dev); - struct ring_info *re = sky2->rx_ring + sky2->rx_next; + struct rx_ring_info *re = sky2->rx_ring + sky2->rx_next; struct sk_buff *skb = NULL; if (unlikely(netif_msg_rx_status(sky2))) @@ -1843,40 +2001,12 @@ static struct sk_buff *sky2_receive(struct net_device *dev, if (length > dev->mtu + ETH_HLEN) goto oversize; - if (length < copybreak) { - skb = netdev_alloc_skb(dev, length + 2); - if (!skb) - goto resubmit; - - skb_reserve(skb, 2); - pci_dma_sync_single_for_cpu(sky2->hw->pdev, re->mapaddr, - length, PCI_DMA_FROMDEVICE); - memcpy(skb->data, re->skb->data, length); - skb->ip_summed = re->skb->ip_summed; - skb->csum = re->skb->csum; - pci_dma_sync_single_for_device(sky2->hw->pdev, re->mapaddr, - length, PCI_DMA_FROMDEVICE); - } else { - struct sk_buff *nskb; - - nskb = sky2_alloc_skb(dev, sky2->rx_bufsize, GFP_ATOMIC); - if (!nskb) - goto resubmit; - - skb = re->skb; - re->skb = nskb; - pci_unmap_single(sky2->hw->pdev, re->mapaddr, - sky2->rx_bufsize, PCI_DMA_FROMDEVICE); - prefetch(skb->data); - - re->mapaddr = pci_map_single(sky2->hw->pdev, nskb->data, - sky2->rx_bufsize, PCI_DMA_FROMDEVICE); - } - - skb_put(skb, length); + if (length < copybreak) + skb = receive_copy(sky2, re, length); + else + skb = receive_new(sky2, re, length); resubmit: - re->skb->ip_summed = CHECKSUM_NONE; - sky2_rx_add(sky2, re->mapaddr); + sky2_rx_submit(sky2, re); return skb; @@ -1909,9 +2039,9 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last) struct sky2_port *sky2 = netdev_priv(dev); if (netif_running(dev)) { - spin_lock(&sky2->tx_lock); + netif_tx_lock(dev); sky2_tx_complete(sky2, last); - spin_unlock(&sky2->tx_lock); + netif_tx_unlock(dev); } } @@ -2082,7 +2212,7 @@ static void sky2_hw_intr(struct sky2_hw *hw) sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); sky2_pci_write16(hw, PCI_STATUS, - pci_err | PCI_STATUS_ERROR_BITS); + pci_err | PCI_STATUS_ERROR_BITS); sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); } @@ -2090,7 +2220,8 @@ static void sky2_hw_intr(struct sky2_hw *hw) /* PCI-Express uncorrectable Error occurred */ u32 pex_err; - pex_err = sky2_pci_read32(hw, PEX_UNC_ERR_STAT); + pex_err = sky2_pci_read32(hw, + hw->err_cap + PCI_ERR_UNCOR_STATUS); if (net_ratelimit()) printk(KERN_ERR PFX "%s: pci express error (0x%x)\n", @@ -2098,15 +2229,20 @@ static void sky2_hw_intr(struct sky2_hw *hw) /* clear the interrupt */ sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); - sky2_pci_write32(hw, PEX_UNC_ERR_STAT, - 0xffffffffUL); + sky2_pci_write32(hw, + hw->err_cap + PCI_ERR_UNCOR_STATUS, + 0xffffffffUL); sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); - if (pex_err & PEX_FATAL_ERRORS) { + + /* In case of fatal error mask off to keep from getting stuck */ + if (pex_err & (PCI_ERR_UNC_POISON_TLP | PCI_ERR_UNC_FCP + | PCI_ERR_UNC_DLP)) { u32 hwmsk = sky2_read32(hw, B0_HWE_IMSK); hwmsk &= ~Y2_IS_PCI_EXP; sky2_write32(hw, B0_HWE_IMSK, hwmsk); } + } if (status & Y2_HWE_L1_MASK) @@ -2287,6 +2423,7 @@ static int sky2_reset(struct sky2_hw *hw) u16 status; u8 t8; int i; + u32 msk; sky2_write8(hw, B0_CTST, CS_RST_CLR); @@ -2327,9 +2464,13 @@ static int sky2_reset(struct sky2_hw *hw) sky2_write8(hw, B0_CTST, CS_MRST_CLR); /* clear any PEX errors */ - if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP)) - sky2_pci_write32(hw, PEX_UNC_ERR_STAT, 0xffffffffUL); - + if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP)) { + hw->err_cap = pci_find_ext_capability(hw->pdev, PCI_EXT_CAP_ID_ERR); + if (hw->err_cap) + sky2_pci_write32(hw, + hw->err_cap + PCI_ERR_UNCOR_STATUS, + 0xffffffffUL); + } hw->pmd_type = sky2_read8(hw, B2_PMD_TYP); hw->ports = 1; @@ -2386,7 +2527,10 @@ static int sky2_reset(struct sky2_hw *hw) sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS2), SK_RI_TO_53); } - sky2_write32(hw, B0_HWE_IMSK, Y2_HWE_ALL_MASK); + msk = Y2_HWE_ALL_MASK; + if (!hw->err_cap) + msk &= ~Y2_IS_PCI_EXP; + sky2_write32(hw, B0_HWE_IMSK, msk); for (i = 0; i < hw->ports; i++) sky2_gmac_reset(hw, i); @@ -3102,7 +3246,6 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, sky2->hw = hw; sky2->msg_enable = netif_msg_init(debug, default_msg); - spin_lock_init(&sky2->tx_lock); /* Auto speed and flow control */ sky2->autoneg = AUTONEG_ENABLE; sky2->tx_pause = 1; @@ -3115,13 +3258,11 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, spin_lock_init(&sky2->phy_lock); sky2->tx_pending = TX_DEF_PENDING; sky2->rx_pending = RX_DEF_PENDING; - sky2->rx_bufsize = sky2_buf_size(ETH_DATA_LEN); hw->dev[port] = dev; sky2->port = port; - dev->features |= NETIF_F_LLTX; if (hw->chip_id != CHIP_ID_YUKON_EC_U) dev->features |= NETIF_F_TSO; if (highmem) @@ -3316,6 +3457,14 @@ static int __devinit sky2_probe(struct pci_dev *pdev, if (!dev) goto err_out_free_pci; + if (!disable_msi && pci_enable_msi(pdev) == 0) { + err = sky2_test_msi(hw); + if (err == -EOPNOTSUPP) + pci_disable_msi(pdev); + else if (err) + goto err_out_free_netdev; + } + err = register_netdev(dev); if (err) { printk(KERN_ERR PFX "%s: cannot register net device\n", @@ -3323,6 +3472,14 @@ static int __devinit sky2_probe(struct pci_dev *pdev, goto err_out_free_netdev; } + err = request_irq(pdev->irq, sky2_intr, IRQF_SHARED, dev->name, hw); + if (err) { + printk(KERN_ERR PFX "%s: cannot assign irq %d\n", + pci_name(pdev), pdev->irq); + goto err_out_unregister; + } + sky2_write32(hw, B0_IMSK, Y2_IS_BASE); + sky2_show_addr(dev); if (hw->ports > 1 && (dev1 = sky2_init_netdev(hw, 1, using_dac))) { @@ -3337,23 +3494,6 @@ static int __devinit sky2_probe(struct pci_dev *pdev, } } - if (!disable_msi && pci_enable_msi(pdev) == 0) { - err = sky2_test_msi(hw); - if (err == -EOPNOTSUPP) - pci_disable_msi(pdev); - else if (err) - goto err_out_unregister; - } - - err = request_irq(pdev->irq, sky2_intr, IRQF_SHARED, DRV_NAME, hw); - if (err) { - printk(KERN_ERR PFX "%s: cannot assign irq %d\n", - pci_name(pdev), pdev->irq); - goto err_out_unregister; - } - - sky2_write32(hw, B0_IMSK, Y2_IS_BASE); - setup_timer(&hw->idle_timer, sky2_idle, (unsigned long) hw); sky2_idle_start(hw); @@ -3363,10 +3503,6 @@ static int __devinit sky2_probe(struct pci_dev *pdev, err_out_unregister: pci_disable_msi(pdev); - if (dev1) { - unregister_netdev(dev1); - free_netdev(dev1); - } unregister_netdev(dev); err_out_free_netdev: free_netdev(dev); diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 4c13c371bc2..f66109a96d9 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -4,24 +4,17 @@ #ifndef _SKY2_H #define _SKY2_H -/* PCI config registers */ +#define ETH_JUMBO_MTU 9000 /* Maximum MTU supported */ + +/* PCI device specific config registers */ enum { PCI_DEV_REG1 = 0x40, PCI_DEV_REG2 = 0x44, - PCI_DEV_STATUS = 0x7c, PCI_DEV_REG3 = 0x80, PCI_DEV_REG4 = 0x84, PCI_DEV_REG5 = 0x88, }; -enum { - PEX_DEV_CAP = 0xe4, - PEX_DEV_CTRL = 0xe8, - PEX_DEV_STA = 0xea, - PEX_LNK_STAT = 0xf2, - PEX_UNC_ERR_STAT= 0x104, -}; - /* Yukon-2 */ enum pci_dev_reg_1 { PCI_Y2_PIG_ENA = 1<<31, /* Enable Plug-in-Go (YUKON-2) */ @@ -70,39 +63,6 @@ enum pci_dev_reg_4 { PCI_STATUS_REC_MASTER_ABORT | \ PCI_STATUS_REC_TARGET_ABORT | \ PCI_STATUS_PARITY) - -enum pex_dev_ctrl { - PEX_DC_MAX_RRS_MSK = 7<<12, /* Bit 14..12: Max. Read Request Size */ - PEX_DC_EN_NO_SNOOP = 1<<11,/* Enable No Snoop */ - PEX_DC_EN_AUX_POW = 1<<10,/* Enable AUX Power */ - PEX_DC_EN_PHANTOM = 1<<9, /* Enable Phantom Functions */ - PEX_DC_EN_EXT_TAG = 1<<8, /* Enable Extended Tag Field */ - PEX_DC_MAX_PLS_MSK = 7<<5, /* Bit 7.. 5: Max. Payload Size Mask */ - PEX_DC_EN_REL_ORD = 1<<4, /* Enable Relaxed Ordering */ - PEX_DC_EN_UNS_RQ_RP = 1<<3, /* Enable Unsupported Request Reporting */ - PEX_DC_EN_FAT_ER_RP = 1<<2, /* Enable Fatal Error Reporting */ - PEX_DC_EN_NFA_ER_RP = 1<<1, /* Enable Non-Fatal Error Reporting */ - PEX_DC_EN_COR_ER_RP = 1<<0, /* Enable Correctable Error Reporting */ -}; -#define PEX_DC_MAX_RD_RQ_SIZE(x) (((x)<<12) & PEX_DC_MAX_RRS_MSK) - -/* PEX_UNC_ERR_STAT PEX Uncorrectable Errors Status Register (Yukon-2) */ -enum pex_err { - PEX_UNSUP_REQ = 1<<20, /* Unsupported Request Error */ - - PEX_MALFOR_TLP = 1<<18, /* Malformed TLP */ - - PEX_UNEXP_COMP = 1<<16, /* Unexpected Completion */ - - PEX_COMP_TO = 1<<14, /* Completion Timeout */ - PEX_FLOW_CTRL_P = 1<<13, /* Flow Control Protocol Error */ - PEX_POIS_TLP = 1<<12, /* Poisoned TLP */ - - PEX_DATA_LINK_P = 1<<4, /* Data Link Protocol Error */ - PEX_FATAL_ERRORS= (PEX_MALFOR_TLP | PEX_FLOW_CTRL_P | PEX_DATA_LINK_P), -}; - - enum csr_regs { B0_RAP = 0x0000, B0_CTST = 0x0004, @@ -1816,12 +1776,14 @@ struct sky2_status_le { struct tx_ring_info { struct sk_buff *skb; DECLARE_PCI_UNMAP_ADDR(mapaddr); - u16 idx; + DECLARE_PCI_UNMAP_ADDR(maplen); }; -struct ring_info { +struct rx_ring_info { struct sk_buff *skb; - dma_addr_t mapaddr; + dma_addr_t data_addr; + DECLARE_PCI_UNMAP_ADDR(data_size); + dma_addr_t frag_addr[ETH_JUMBO_MTU >> PAGE_SHIFT]; }; struct sky2_port { @@ -1831,7 +1793,6 @@ struct sky2_port { u32 msg_enable; spinlock_t phy_lock; - spinlock_t tx_lock ____cacheline_aligned_in_smp; struct tx_ring_info *tx_ring; struct sky2_tx_le *tx_le; u16 tx_cons; /* next le to check */ @@ -1841,13 +1802,15 @@ struct sky2_port { u16 tx_last_mss; u32 tx_tcpsum; - struct ring_info *rx_ring ____cacheline_aligned_in_smp; + struct rx_ring_info *rx_ring ____cacheline_aligned_in_smp; struct sky2_rx_le *rx_le; u32 rx_addr64; u16 rx_next; /* next re to check */ u16 rx_put; /* next le index to use */ u16 rx_pending; - u16 rx_bufsize; + u16 rx_data_size; + u16 rx_nfrags; + #ifdef SKY2_VLAN_TAG_USED u16 rx_tag; struct vlan_group *vlgrp; @@ -1873,6 +1836,7 @@ struct sky2_hw { struct net_device *dev[2]; int pm_cap; + int err_cap; u8 chip_id; u8 chip_rev; u8 pmd_type; diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 7aa7fbac822..fedd1a37bc3 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -195,6 +195,7 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg) #define SMC_IRQ_FLAGS (( \ machine_is_omap_h2() \ || machine_is_omap_h3() \ + || machine_is_omap_h4() \ || (machine_is_omap_innovator() && !cpu_is_omap1510()) \ ) ? IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING) @@ -379,6 +380,24 @@ static inline void LPD7_SMC_outsw (unsigned char* a, int r, #define SMC_IRQ_FLAGS (0) +#elif defined(CONFIG_ARCH_VERSATILE) + +#define SMC_CAN_USE_8BIT 1 +#define SMC_CAN_USE_16BIT 1 +#define SMC_CAN_USE_32BIT 1 +#define SMC_NOWAIT 1 + +#define SMC_inb(a, r) readb((a) + (r)) +#define SMC_inw(a, r) readw((a) + (r)) +#define SMC_inl(a, r) readl((a) + (r)) +#define SMC_outb(v, a, r) writeb(v, (a) + (r)) +#define SMC_outw(v, a, r) writew(v, (a) + (r)) +#define SMC_outl(v, a, r) writel(v, (a) + (r)) +#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l) +#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l) + +#define SMC_IRQ_FLAGS (0) + #else #define SMC_CAN_USE_8BIT 1 diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c index cc240adb726..1397fc55cf6 100644 --- a/drivers/net/spider_net.c +++ b/drivers/net/spider_net.c @@ -317,7 +317,7 @@ spider_net_init_chain(struct spider_net_card *card, SPIDER_NET_DESCR_SIZE, direction); - if (buf == DMA_ERROR_CODE) + if (pci_dma_mapping_error(buf)) goto iommu_error; descr->bus_addr = buf; @@ -420,7 +420,7 @@ spider_net_prepare_rx_descr(struct spider_net_card *card, buf = pci_map_single(card->pdev, descr->skb->data, SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE); descr->buf_addr = buf; - if (buf == DMA_ERROR_CODE) { + if (pci_dma_mapping_error(buf)) { dev_kfree_skb_any(descr->skb); if (netif_msg_rx_err(card) && net_ratelimit()) pr_err("Could not iommu-map rx buffer\n"); @@ -649,7 +649,7 @@ spider_net_prepare_tx_descr(struct spider_net_card *card, dma_addr_t buf; buf = pci_map_single(card->pdev, skb->data, skb->len, PCI_DMA_TODEVICE); - if (buf == DMA_ERROR_CODE) { + if (pci_dma_mapping_error(buf)) { if (netif_msg_tx_err(card) && net_ratelimit()) pr_err("could not iommu-map packet (%p, %i). " "Dropping packet\n", skb->data, skb->len); diff --git a/drivers/net/stnic.c b/drivers/net/stnic.c index 3fd7a4fee66..e6f90427160 100644 --- a/drivers/net/stnic.c +++ b/drivers/net/stnic.c @@ -19,7 +19,7 @@ #include <asm/system.h> #include <asm/io.h> -#include <asm/se/se.h> +#include <asm/se.h> #include <asm/machvec.h> #ifdef CONFIG_SH_STANDARD_BIOS #include <asm/sh_bios.h> diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index aaf45b907a7..c25ba273b74 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -68,8 +68,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.65" -#define DRV_MODULE_RELDATE "August 07, 2006" +#define DRV_MODULE_VERSION "3.66" +#define DRV_MODULE_RELDATE "September 23, 2006" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 @@ -173,6 +173,7 @@ static struct pci_device_id tg3_pci_tbl[] = { {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5705F)}, {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5720)}, {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5721)}, + {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5722)}, {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5750)}, {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751)}, {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5750M)}, @@ -187,6 +188,7 @@ static struct pci_device_id tg3_pci_tbl[] = { {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5754M)}, {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5755)}, {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5755M)}, + {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5756)}, {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5786)}, {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5787)}, {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5787M)}, @@ -197,6 +199,8 @@ static struct pci_device_id tg3_pci_tbl[] = { {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5780)}, {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5780S)}, {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5781)}, + {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5906)}, + {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5906M)}, {PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_9DXX)}, {PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_9MXX)}, {PCI_DEVICE(PCI_VENDOR_ID_ALTIMA, PCI_DEVICE_ID_ALTIMA_AC1000)}, @@ -424,6 +428,16 @@ static void tg3_write32_tx_mbox(struct tg3 *tp, u32 off, u32 val) readl(mbox); } +static u32 tg3_read32_mbox_5906(struct tg3 *tp, u32 off) +{ + return (readl(tp->regs + off + GRCMBOX_BASE)); +} + +static void tg3_write32_mbox_5906(struct tg3 *tp, u32 off, u32 val) +{ + writel(val, tp->regs + off + GRCMBOX_BASE); +} + #define tw32_mailbox(reg, val) tp->write32_mbox(tp, reg, val) #define tw32_mailbox_f(reg, val) tw32_mailbox_flush(tp, (reg), (val)) #define tw32_rx_mbox(reg, val) tp->write32_rx_mbox(tp, reg, val) @@ -439,6 +453,10 @@ static void tg3_write_mem(struct tg3 *tp, u32 off, u32 val) { unsigned long flags; + if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) && + (off >= NIC_SRAM_STATS_BLK) && (off < NIC_SRAM_TX_BUFFER_DESC)) + return; + spin_lock_irqsave(&tp->indirect_lock, flags); if (tp->tg3_flags & TG3_FLAG_SRAM_USE_CONFIG) { pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, off); @@ -460,6 +478,12 @@ static void tg3_read_mem(struct tg3 *tp, u32 off, u32 *val) { unsigned long flags; + if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) && + (off >= NIC_SRAM_STATS_BLK) && (off < NIC_SRAM_TX_BUFFER_DESC)) { + *val = 0; + return; + } + spin_lock_irqsave(&tp->indirect_lock, flags); if (tp->tg3_flags & TG3_FLAG_SRAM_USE_CONFIG) { pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, off); @@ -489,6 +513,9 @@ static inline void tg3_cond_int(struct tg3 *tp) if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) && (tp->hw_status->status & SD_STATUS_UPDATED)) tw32(GRC_LOCAL_CTRL, tp->grc_local_ctrl | GRC_LCLCTRL_SETINT); + else + tw32(HOSTCC_MODE, tp->coalesce_mode | + (HOSTCC_MODE_ENABLE | HOSTCC_MODE_NOW)); } static void tg3_enable_ints(struct tg3 *tp) @@ -654,6 +681,10 @@ static int tg3_writephy(struct tg3 *tp, int reg, u32 val) unsigned int loops; int ret; + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906 && + (reg == MII_TG3_CTRL || reg == MII_TG3_AUX_CTRL)) + return 0; + if ((tp->mi_mode & MAC_MI_MODE_AUTO_POLL) != 0) { tw32_f(MAC_MI_MODE, (tp->mi_mode & ~MAC_MI_MODE_AUTO_POLL)); @@ -1004,6 +1035,24 @@ out: phy_reg | MII_TG3_EXT_CTRL_FIFO_ELASTIC); } + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { + u32 phy_reg; + + /* adjust output voltage */ + tg3_writephy(tp, MII_TG3_EPHY_PTEST, 0x12); + + if (!tg3_readphy(tp, MII_TG3_EPHY_TEST, &phy_reg)) { + u32 phy_reg2; + + tg3_writephy(tp, MII_TG3_EPHY_TEST, + phy_reg | MII_TG3_EPHY_SHADOW_EN); + /* Enable auto-MDIX */ + if (!tg3_readphy(tp, 0x10, &phy_reg2)) + tg3_writephy(tp, 0x10, phy_reg2 | 0x4000); + tg3_writephy(tp, MII_TG3_EPHY_TEST, phy_reg); + } + } + tg3_phy_set_wirespeed(tp); return 0; } @@ -1117,6 +1166,15 @@ static void tg3_nvram_unlock(struct tg3 *); static void tg3_power_down_phy(struct tg3 *tp) { + if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) + return; + + if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906) { + tg3_writephy(tp, MII_TG3_EXT_CTRL, + MII_TG3_EXT_CTRL_FORCE_LED_OFF); + tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x01b2); + } + /* The PHY should not be powered down on some chips because * of bugs. */ @@ -1199,7 +1257,12 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state) tg3_setup_phy(tp, 0); } - if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) { + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { + u32 val; + + val = tr32(GRC_VCPU_EXT_CTRL); + tw32(GRC_VCPU_EXT_CTRL, val | GRC_VCPU_EXT_CTRL_DISABLE_WOL); + } else if (!(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) { int i; u32 val; @@ -1223,7 +1286,10 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state) tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x5a); udelay(40); - mac_mode = MAC_MODE_PORT_MODE_MII; + if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES) + mac_mode = MAC_MODE_PORT_MODE_GMII; + else + mac_mode = MAC_MODE_PORT_MODE_MII; if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 || !(tp->tg3_flags & TG3_FLAG_WOL_SPEED_100MB)) @@ -1301,15 +1367,8 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state) } if (!(tp->tg3_flags & TG3_FLAG_WOL_ENABLE) && - !(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) { - /* Turn off the PHY */ - if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)) { - tg3_writephy(tp, MII_TG3_EXT_CTRL, - MII_TG3_EXT_CTRL_FORCE_LED_OFF); - tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x01b2); - tg3_power_down_phy(tp); - } - } + !(tp->tg3_flags & TG3_FLAG_ENABLE_ASF)) + tg3_power_down_phy(tp); tg3_frob_aux_power(tp); @@ -1467,6 +1526,13 @@ static void tg3_aux_stat_to_speed_duplex(struct tg3 *tp, u32 val, u16 *speed, u8 break; default: + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { + *speed = (val & MII_TG3_AUX_STAT_100) ? SPEED_100 : + SPEED_10; + *duplex = (val & MII_TG3_AUX_STAT_FULL) ? DUPLEX_FULL : + DUPLEX_HALF; + break; + } *speed = SPEED_INVALID; *duplex = DUPLEX_INVALID; break; @@ -1749,7 +1815,7 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset) if (tp->tg3_flags & TG3_FLAG_USE_MI_INTERRUPT) tg3_writephy(tp, MII_TG3_IMASK, ~MII_TG3_INT_LINKCHG); - else + else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906) tg3_writephy(tp, MII_TG3_IMASK, ~0); if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 || @@ -2406,24 +2472,27 @@ static int tg3_setup_fiber_hw_autoneg(struct tg3 *tp, u32 mac_status) expected_sg_dig_ctrl |= (1 << 12); if (sg_dig_ctrl != expected_sg_dig_ctrl) { + if ((tp->tg3_flags2 & TG3_FLG2_PARALLEL_DETECT) && + tp->serdes_counter && + ((mac_status & (MAC_STATUS_PCS_SYNCED | + MAC_STATUS_RCVD_CFG)) == + MAC_STATUS_PCS_SYNCED)) { + tp->serdes_counter--; + current_link_up = 1; + goto out; + } +restart_autoneg: if (workaround) tw32_f(MAC_SERDES_CFG, serdes_cfg | 0xc011000); tw32_f(SG_DIG_CTRL, expected_sg_dig_ctrl | (1 << 30)); udelay(5); tw32_f(SG_DIG_CTRL, expected_sg_dig_ctrl); - tp->tg3_flags2 |= TG3_FLG2_PHY_JUST_INITTED; + tp->serdes_counter = SERDES_AN_TIMEOUT_5704S; + tp->tg3_flags2 &= ~TG3_FLG2_PARALLEL_DETECT; } else if (mac_status & (MAC_STATUS_PCS_SYNCED | MAC_STATUS_SIGNAL_DET)) { - int i; - - /* Giver time to negotiate (~200ms) */ - for (i = 0; i < 40000; i++) { - sg_dig_status = tr32(SG_DIG_STATUS); - if (sg_dig_status & (0x3)) - break; - udelay(5); - } + sg_dig_status = tr32(SG_DIG_STATUS); mac_status = tr32(MAC_STATUS); if ((sg_dig_status & (1 << 1)) && @@ -2439,10 +2508,11 @@ static int tg3_setup_fiber_hw_autoneg(struct tg3 *tp, u32 mac_status) tg3_setup_flow_control(tp, local_adv, remote_adv); current_link_up = 1; - tp->tg3_flags2 &= ~TG3_FLG2_PHY_JUST_INITTED; + tp->serdes_counter = 0; + tp->tg3_flags2 &= ~TG3_FLG2_PARALLEL_DETECT; } else if (!(sg_dig_status & (1 << 1))) { - if (tp->tg3_flags2 & TG3_FLG2_PHY_JUST_INITTED) - tp->tg3_flags2 &= ~TG3_FLG2_PHY_JUST_INITTED; + if (tp->serdes_counter) + tp->serdes_counter--; else { if (workaround) { u32 val = serdes_cfg; @@ -2466,9 +2536,17 @@ static int tg3_setup_fiber_hw_autoneg(struct tg3 *tp, u32 mac_status) !(mac_status & MAC_STATUS_RCVD_CFG)) { tg3_setup_flow_control(tp, 0, 0); current_link_up = 1; - } + tp->tg3_flags2 |= + TG3_FLG2_PARALLEL_DETECT; + tp->serdes_counter = + SERDES_PARALLEL_DET_TIMEOUT; + } else + goto restart_autoneg; } } + } else { + tp->serdes_counter = SERDES_AN_TIMEOUT_5704S; + tp->tg3_flags2 &= ~TG3_FLG2_PARALLEL_DETECT; } out: @@ -2599,14 +2677,16 @@ static int tg3_setup_fiber_phy(struct tg3 *tp, int force_reset) MAC_STATUS_CFG_CHANGED)); udelay(5); if ((tr32(MAC_STATUS) & (MAC_STATUS_SYNC_CHANGED | - MAC_STATUS_CFG_CHANGED)) == 0) + MAC_STATUS_CFG_CHANGED | + MAC_STATUS_LNKSTATE_CHANGED)) == 0) break; } mac_status = tr32(MAC_STATUS); if ((mac_status & MAC_STATUS_PCS_SYNCED) == 0) { current_link_up = 0; - if (tp->link_config.autoneg == AUTONEG_ENABLE) { + if (tp->link_config.autoneg == AUTONEG_ENABLE && + tp->serdes_counter == 0) { tw32_f(MAC_MODE, (tp->mac_mode | MAC_MODE_SEND_CONFIGS)); udelay(1); @@ -2711,7 +2791,7 @@ static int tg3_setup_fiber_mii_phy(struct tg3 *tp, int force_reset) tg3_writephy(tp, MII_BMCR, bmcr); tw32_f(MAC_EVENT, MAC_EVENT_LNKSTATE_CHANGED); - tp->tg3_flags2 |= TG3_FLG2_PHY_JUST_INITTED; + tp->serdes_counter = SERDES_AN_TIMEOUT_5714S; tp->tg3_flags2 &= ~TG3_FLG2_PARALLEL_DETECT; return err; @@ -2816,9 +2896,9 @@ static int tg3_setup_fiber_mii_phy(struct tg3 *tp, int force_reset) static void tg3_serdes_parallel_detect(struct tg3 *tp) { - if (tp->tg3_flags2 & TG3_FLG2_PHY_JUST_INITTED) { + if (tp->serdes_counter) { /* Give autoneg time to complete. */ - tp->tg3_flags2 &= ~TG3_FLG2_PHY_JUST_INITTED; + tp->serdes_counter--; return; } if (!netif_carrier_ok(tp->dev) && @@ -3535,8 +3615,7 @@ static irqreturn_t tg3_test_isr(int irq, void *dev_id, if ((sblk->status & SD_STATUS_UPDATED) || !(tr32(TG3PCI_PCISTATE) & PCISTATE_INT_NOT_ACTIVE)) { - tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, - 0x00000001); + tg3_disable_ints(tp); return IRQ_RETVAL(1); } return IRQ_RETVAL(0); @@ -4644,6 +4723,44 @@ static void tg3_write_sig_legacy(struct tg3 *tp, int kind) } } +static int tg3_poll_fw(struct tg3 *tp) +{ + int i; + u32 val; + + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { + for (i = 0; i < 400; i++) { + if (tr32(VCPU_STATUS) & VCPU_STATUS_INIT_DONE) + return 0; + udelay(10); + } + return -ENODEV; + } + + /* Wait for firmware initialization to complete. */ + for (i = 0; i < 100000; i++) { + tg3_read_mem(tp, NIC_SRAM_FIRMWARE_MBOX, &val); + if (val == ~NIC_SRAM_FIRMWARE_MBOX_MAGIC1) + break; + udelay(10); + } + + /* Chip might not be fitted with firmware. Some Sun onboard + * parts are configured like that. So don't signal the timeout + * of the above loop as an error, but do report the lack of + * running firmware once. + */ + if (i >= 100000 && + !(tp->tg3_flags2 & TG3_FLG2_NO_FWARE_REPORTED)) { + tp->tg3_flags2 |= TG3_FLG2_NO_FWARE_REPORTED; + + printk(KERN_INFO PFX "%s: No firmware running.\n", + tp->dev->name); + } + + return 0; +} + static void tg3_stop_fw(struct tg3 *); /* tp->lock is held. */ @@ -4651,7 +4768,7 @@ static int tg3_chip_reset(struct tg3 *tp) { u32 val; void (*write_op)(struct tg3 *, u32, u32); - int i; + int err; tg3_nvram_lock(tp); @@ -4688,6 +4805,12 @@ static int tg3_chip_reset(struct tg3 *tp) } } + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { + tw32(VCPU_STATUS, tr32(VCPU_STATUS) | VCPU_STATUS_DRV_RESET); + tw32(GRC_VCPU_EXT_CTRL, + tr32(GRC_VCPU_EXT_CTRL) & ~GRC_VCPU_EXT_CTRL_HALT_CPU); + } + if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) val |= GRC_MISC_CFG_KEEP_GPHY_POWER; tw32(GRC_MISC_CFG, val); @@ -4811,26 +4934,9 @@ static int tg3_chip_reset(struct tg3 *tp) tw32_f(MAC_MODE, 0); udelay(40); - /* Wait for firmware initialization to complete. */ - for (i = 0; i < 100000; i++) { - tg3_read_mem(tp, NIC_SRAM_FIRMWARE_MBOX, &val); - if (val == ~NIC_SRAM_FIRMWARE_MBOX_MAGIC1) - break; - udelay(10); - } - - /* Chip might not be fitted with firmare. Some Sun onboard - * parts are configured like that. So don't signal the timeout - * of the above loop as an error, but do report the lack of - * running firmware once. - */ - if (i >= 100000 && - !(tp->tg3_flags2 & TG3_FLG2_NO_FWARE_REPORTED)) { - tp->tg3_flags2 |= TG3_FLG2_NO_FWARE_REPORTED; - - printk(KERN_INFO PFX "%s: No firmware running.\n", - tp->dev->name); - } + err = tg3_poll_fw(tp); + if (err) + return err; if ((tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) && tp->pci_chip_rev_id != CHIPREV_ID_5750_A0) { @@ -5036,6 +5142,12 @@ static int tg3_halt_cpu(struct tg3 *tp, u32 offset) BUG_ON(offset == TX_CPU_BASE && (tp->tg3_flags2 & TG3_FLG2_5705_PLUS)); + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { + u32 val = tr32(GRC_VCPU_EXT_CTRL); + + tw32(GRC_VCPU_EXT_CTRL, val | GRC_VCPU_EXT_CTRL_HALT_CPU); + return 0; + } if (offset == RX_CPU_BASE) { for (i = 0; i < 10000; i++) { tw32(offset + CPU_STATE, 0xffffffff); @@ -6040,6 +6152,13 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) val = 1; else if (val > tp->rx_std_max_post) val = tp->rx_std_max_post; + else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { + if (tp->pci_chip_rev_id == CHIPREV_ID_5906_A1) + tw32(ISO_PKT_TX, (tr32(ISO_PKT_TX) & ~0x3) | 0x2); + + if (val > (TG3_RX_INTERNAL_RING_SZ_5906 / 2)) + val = TG3_RX_INTERNAL_RING_SZ_5906 / 2; + } tw32(RCVBDI_STD_THRESH, val); @@ -6460,7 +6579,8 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) if (err) return err; - if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES)) { + if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) && + GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906) { u32 tmp; /* Clear CRC stats. */ @@ -6660,12 +6780,14 @@ static void tg3_timer(unsigned long __opaque) need_setup = 1; } if (need_setup) { - tw32_f(MAC_MODE, - (tp->mac_mode & - ~MAC_MODE_PORT_MODE_MASK)); - udelay(40); - tw32_f(MAC_MODE, tp->mac_mode); - udelay(40); + if (!tp->serdes_counter) { + tw32_f(MAC_MODE, + (tp->mac_mode & + ~MAC_MODE_PORT_MODE_MASK)); + udelay(40); + tw32_f(MAC_MODE, tp->mac_mode); + udelay(40); + } tg3_setup_phy(tp, 0); } } else if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES) @@ -6674,13 +6796,29 @@ static void tg3_timer(unsigned long __opaque) tp->timer_counter = tp->timer_multiplier; } - /* Heartbeat is only sent once every 2 seconds. */ + /* Heartbeat is only sent once every 2 seconds. + * + * The heartbeat is to tell the ASF firmware that the host + * driver is still alive. In the event that the OS crashes, + * ASF needs to reset the hardware to free up the FIFO space + * that may be filled with rx packets destined for the host. + * If the FIFO is full, ASF will no longer function properly. + * + * Unintended resets have been reported on real time kernels + * where the timer doesn't run on time. Netpoll will also have + * same problem. + * + * The new FWCMD_NICDRV_ALIVE3 command tells the ASF firmware + * to check the ring condition when the heartbeat is expiring + * before doing the reset. This will prevent most unintended + * resets. + */ if (!--tp->asf_counter) { if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) { u32 val; tg3_write_mem(tp, NIC_SRAM_FW_CMD_MBOX, - FWCMD_NICDRV_ALIVE2); + FWCMD_NICDRV_ALIVE3); tg3_write_mem(tp, NIC_SRAM_FW_CMD_LEN_MBOX, 4); /* 5 seconds timeout */ tg3_write_mem(tp, NIC_SRAM_FW_CMD_DATA_MBOX, 5); @@ -6721,8 +6859,7 @@ static int tg3_request_irq(struct tg3 *tp) static int tg3_test_interrupt(struct tg3 *tp) { struct net_device *dev = tp->dev; - int err, i; - u32 int_mbox = 0; + int err, i, intr_ok = 0; if (!netif_running(dev)) return -ENODEV; @@ -6743,10 +6880,18 @@ static int tg3_test_interrupt(struct tg3 *tp) HOSTCC_MODE_NOW); for (i = 0; i < 5; i++) { + u32 int_mbox, misc_host_ctrl; + int_mbox = tr32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW); - if (int_mbox != 0) + misc_host_ctrl = tr32(TG3PCI_MISC_HOST_CTRL); + + if ((int_mbox != 0) || + (misc_host_ctrl & MISC_HOST_CTRL_MASK_PCI_INT)) { + intr_ok = 1; break; + } + msleep(10); } @@ -6759,7 +6904,7 @@ static int tg3_test_interrupt(struct tg3 *tp) if (err) return err; - if (int_mbox != 0) + if (intr_ok) return 0; return -EIO; @@ -6936,9 +7081,10 @@ static int tg3_open(struct net_device *dev) if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) { if (tp->tg3_flags2 & TG3_FLG2_1SHOT_MSI) { - u32 val = tr32(0x7c04); + u32 val = tr32(PCIE_TRANSACTION_CFG); - tw32(0x7c04, val | (1 << 29)); + tw32(PCIE_TRANSACTION_CFG, + val | PCIE_TRANS_CFG_1SHOT_MSI); } } } @@ -7857,7 +8003,7 @@ static int tg3_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) if (wol->wolopts & ~WAKE_MAGIC) return -EINVAL; if ((wol->wolopts & WAKE_MAGIC) && - tp->tg3_flags2 & TG3_FLG2_PHY_SERDES && + tp->tg3_flags2 & TG3_FLG2_ANY_SERDES && !(tp->tg3_flags & TG3_FLAG_SERDES_WOL_CAP)) return -EINVAL; @@ -7893,7 +8039,8 @@ static int tg3_set_tso(struct net_device *dev, u32 value) return -EINVAL; return 0; } - if (tp->tg3_flags2 & TG3_FLG2_HW_TSO_2) { + if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO_2) && + (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906)) { if (value) dev->features |= NETIF_F_TSO6; else @@ -8147,6 +8294,8 @@ static void tg3_get_ethtool_stats (struct net_device *dev, #define NVRAM_TEST_SIZE 0x100 #define NVRAM_SELFBOOT_FORMAT1_SIZE 0x14 +#define NVRAM_SELFBOOT_HW_SIZE 0x20 +#define NVRAM_SELFBOOT_DATA_SIZE 0x1c static int tg3_test_nvram(struct tg3 *tp) { @@ -8158,12 +8307,14 @@ static int tg3_test_nvram(struct tg3 *tp) if (magic == TG3_EEPROM_MAGIC) size = NVRAM_TEST_SIZE; - else if ((magic & 0xff000000) == 0xa5000000) { + else if ((magic & TG3_EEPROM_MAGIC_FW_MSK) == TG3_EEPROM_MAGIC_FW) { if ((magic & 0xe00000) == 0x200000) size = NVRAM_SELFBOOT_FORMAT1_SIZE; else return 0; - } else + } else if ((magic & TG3_EEPROM_MAGIC_HW_MSK) == TG3_EEPROM_MAGIC_HW) + size = NVRAM_SELFBOOT_HW_SIZE; + else return -EIO; buf = kmalloc(size, GFP_KERNEL); @@ -8182,7 +8333,8 @@ static int tg3_test_nvram(struct tg3 *tp) goto out; /* Selfboot format */ - if (cpu_to_be32(buf[0]) != TG3_EEPROM_MAGIC) { + if ((cpu_to_be32(buf[0]) & TG3_EEPROM_MAGIC_FW_MSK) == + TG3_EEPROM_MAGIC_FW) { u8 *buf8 = (u8 *) buf, csum8 = 0; for (i = 0; i < size; i++) @@ -8197,6 +8349,51 @@ static int tg3_test_nvram(struct tg3 *tp) goto out; } + if ((cpu_to_be32(buf[0]) & TG3_EEPROM_MAGIC_HW_MSK) == + TG3_EEPROM_MAGIC_HW) { + u8 data[NVRAM_SELFBOOT_DATA_SIZE]; + u8 parity[NVRAM_SELFBOOT_DATA_SIZE]; + u8 *buf8 = (u8 *) buf; + int j, k; + + /* Separate the parity bits and the data bytes. */ + for (i = 0, j = 0, k = 0; i < NVRAM_SELFBOOT_HW_SIZE; i++) { + if ((i == 0) || (i == 8)) { + int l; + u8 msk; + + for (l = 0, msk = 0x80; l < 7; l++, msk >>= 1) + parity[k++] = buf8[i] & msk; + i++; + } + else if (i == 16) { + int l; + u8 msk; + + for (l = 0, msk = 0x20; l < 6; l++, msk >>= 1) + parity[k++] = buf8[i] & msk; + i++; + + for (l = 0, msk = 0x80; l < 8; l++, msk >>= 1) + parity[k++] = buf8[i] & msk; + i++; + } + data[j++] = buf8[i]; + } + + err = -EIO; + for (i = 0; i < NVRAM_SELFBOOT_DATA_SIZE; i++) { + u8 hw8 = hweight8(data[i]); + + if ((hw8 & 0x1) && parity[i]) + goto out; + else if (!(hw8 & 0x1) && !parity[i]) + goto out; + } + err = 0; + goto out; + } + /* Bootstrap checksum at offset 0x10 */ csum = calc_crc((unsigned char *) buf, 0x10); if(csum != cpu_to_le32(buf[0x10/4])) @@ -8243,7 +8440,7 @@ static int tg3_test_link(struct tg3 *tp) /* Only test the commonly used registers */ static int tg3_test_registers(struct tg3 *tp) { - int i, is_5705; + int i, is_5705, is_5750; u32 offset, read_mask, write_mask, val, save_val, read_val; static struct { u16 offset; @@ -8251,6 +8448,7 @@ static int tg3_test_registers(struct tg3 *tp) #define TG3_FL_5705 0x1 #define TG3_FL_NOT_5705 0x2 #define TG3_FL_NOT_5788 0x4 +#define TG3_FL_NOT_5750 0x8 u32 read_mask; u32 write_mask; } reg_tbl[] = { @@ -8361,9 +8559,9 @@ static int tg3_test_registers(struct tg3 *tp) 0xffffffff, 0x00000000 }, /* Buffer Manager Control Registers. */ - { BUFMGR_MB_POOL_ADDR, 0x0000, + { BUFMGR_MB_POOL_ADDR, TG3_FL_NOT_5750, 0x00000000, 0x007fff80 }, - { BUFMGR_MB_POOL_SIZE, 0x0000, + { BUFMGR_MB_POOL_SIZE, TG3_FL_NOT_5750, 0x00000000, 0x007fffff }, { BUFMGR_MB_RDMA_LOW_WATER, 0x0000, 0x00000000, 0x0000003f }, @@ -8389,10 +8587,12 @@ static int tg3_test_registers(struct tg3 *tp) { 0xffff, 0x0000, 0x00000000, 0x00000000 }, }; - if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) + is_5705 = is_5750 = 0; + if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) { is_5705 = 1; - else - is_5705 = 0; + if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS) + is_5750 = 1; + } for (i = 0; reg_tbl[i].offset != 0xffff; i++) { if (is_5705 && (reg_tbl[i].flags & TG3_FL_NOT_5705)) @@ -8405,6 +8605,9 @@ static int tg3_test_registers(struct tg3 *tp) (reg_tbl[i].flags & TG3_FL_NOT_5788)) continue; + if (is_5750 && (reg_tbl[i].flags & TG3_FL_NOT_5750)) + continue; + offset = (u32) reg_tbl[i].offset; read_mask = reg_tbl[i].read_mask; write_mask = reg_tbl[i].write_mask; @@ -8496,6 +8699,13 @@ static int tg3_test_memory(struct tg3 *tp) { 0x00008000, 0x02000}, { 0x00010000, 0x0c000}, { 0xffffffff, 0x00000} + }, mem_tbl_5906[] = { + { 0x00000200, 0x00008}, + { 0x00004000, 0x00400}, + { 0x00006000, 0x00400}, + { 0x00008000, 0x01000}, + { 0x00010000, 0x01000}, + { 0xffffffff, 0x00000} }; struct mem_entry *mem_tbl; int err = 0; @@ -8505,6 +8715,8 @@ static int tg3_test_memory(struct tg3 *tp) if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787) mem_tbl = mem_tbl_5755; + else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) + mem_tbl = mem_tbl_5906; else mem_tbl = mem_tbl_5705; } else @@ -8541,13 +8753,41 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode) return 0; mac_mode = (tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK) | - MAC_MODE_PORT_INT_LPBACK | MAC_MODE_LINK_POLARITY | - MAC_MODE_PORT_MODE_GMII; + MAC_MODE_PORT_INT_LPBACK | MAC_MODE_LINK_POLARITY; + if (tp->tg3_flags & TG3_FLAG_10_100_ONLY) + mac_mode |= MAC_MODE_PORT_MODE_MII; + else + mac_mode |= MAC_MODE_PORT_MODE_GMII; tw32(MAC_MODE, mac_mode); } else if (loopback_mode == TG3_PHY_LOOPBACK) { - tg3_writephy(tp, MII_BMCR, BMCR_LOOPBACK | BMCR_FULLDPLX | - BMCR_SPEED1000); + u32 val; + + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { + u32 phytest; + + if (!tg3_readphy(tp, MII_TG3_EPHY_TEST, &phytest)) { + u32 phy; + + tg3_writephy(tp, MII_TG3_EPHY_TEST, + phytest | MII_TG3_EPHY_SHADOW_EN); + if (!tg3_readphy(tp, 0x1b, &phy)) + tg3_writephy(tp, 0x1b, phy & ~0x20); + if (!tg3_readphy(tp, 0x10, &phy)) + tg3_writephy(tp, 0x10, phy & ~0x4000); + tg3_writephy(tp, MII_TG3_EPHY_TEST, phytest); + } + } + val = BMCR_LOOPBACK | BMCR_FULLDPLX; + if (tp->tg3_flags & TG3_FLAG_10_100_ONLY) + val |= BMCR_SPEED100; + else + val |= BMCR_SPEED1000; + + tg3_writephy(tp, MII_BMCR, val); udelay(40); + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) + tg3_writephy(tp, MII_TG3_EPHY_PTEST, 0x1800); + /* reset to prevent losing 1st rx packet intermittently */ if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES) { tw32_f(MAC_RX_MODE, RX_MODE_RESET); @@ -8555,7 +8795,11 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode) tw32_f(MAC_RX_MODE, tp->rx_mode); } mac_mode = (tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK) | - MAC_MODE_LINK_POLARITY | MAC_MODE_PORT_MODE_GMII; + MAC_MODE_LINK_POLARITY; + if (tp->tg3_flags & TG3_FLAG_10_100_ONLY) + mac_mode |= MAC_MODE_PORT_MODE_MII; + else + mac_mode |= MAC_MODE_PORT_MODE_GMII; if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401) { mac_mode &= ~MAC_MODE_LINK_POLARITY; tg3_writephy(tp, MII_TG3_EXT_CTRL, @@ -8604,7 +8848,8 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode) udelay(10); - for (i = 0; i < 10; i++) { + /* 250 usec to allow enough time on some 10/100 Mbps devices. */ + for (i = 0; i < 25; i++) { tw32_f(HOSTCC_MODE, tp->coalesce_mode | HOSTCC_MODE_ENABLE | HOSTCC_MODE_NOW); @@ -8956,7 +9201,9 @@ static void __devinit tg3_get_eeprom_size(struct tg3 *tp) if (tg3_nvram_read_swab(tp, 0, &magic) != 0) return; - if ((magic != TG3_EEPROM_MAGIC) && ((magic & 0xff000000) != 0xa5000000)) + if ((magic != TG3_EEPROM_MAGIC) && + ((magic & TG3_EEPROM_MAGIC_FW_MSK) != TG3_EEPROM_MAGIC_FW) && + ((magic & TG3_EEPROM_MAGIC_HW_MSK) != TG3_EEPROM_MAGIC_HW)) return; /* @@ -9194,6 +9441,13 @@ static void __devinit tg3_get_5787_nvram_info(struct tg3 *tp) } } +static void __devinit tg3_get_5906_nvram_info(struct tg3 *tp) +{ + tp->nvram_jedecnum = JEDEC_ATMEL; + tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED; + tp->nvram_pagesize = ATMEL_AT24C512_CHIP_SIZE; +} + /* Chips other than 5700/5701 use the NVRAM for fetching info. */ static void __devinit tg3_nvram_init(struct tg3 *tp) { @@ -9230,6 +9484,8 @@ static void __devinit tg3_nvram_init(struct tg3 *tp) tg3_get_5755_nvram_info(tp); else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787) tg3_get_5787_nvram_info(tp); + else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) + tg3_get_5906_nvram_info(tp); else tg3_get_nvram_info(tp); @@ -9703,6 +9959,12 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp) /* Assume an onboard device by default. */ tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT; + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { + if (!(tr32(PCIE_TRANSACTION_CFG) & PCIE_TRANS_CFG_LOM)) + tp->tg3_flags &= ~TG3_FLAG_EEPROM_WRITE_PROT; + return; + } + tg3_read_mem(tp, NIC_SRAM_DATA_SIG, &val); if (val == NIC_SRAM_DATA_SIG_MAGIC) { u32 nic_cfg, led_cfg; @@ -10034,7 +10296,10 @@ static void __devinit tg3_read_partno(struct tg3 *tp) } out_not_found: - strcpy(tp->board_part_number, "none"); + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) + strcpy(tp->board_part_number, "BCM95906"); + else + strcpy(tp->board_part_number, "none"); } static void __devinit tg3_read_fw_ver(struct tg3 *tp) @@ -10236,6 +10501,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787 || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906 || (tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) tp->tg3_flags2 |= TG3_FLG2_5750_PLUS; @@ -10245,7 +10511,8 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS) { if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787) { + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787 || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { tp->tg3_flags2 |= TG3_FLG2_HW_TSO_2; tp->tg3_flags2 |= TG3_FLG2_1SHOT_MSI; } else { @@ -10262,7 +10529,8 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5750 && GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5752 && GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5755 && - GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5787) + GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5787 && + GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906) tp->tg3_flags2 |= TG3_FLG2_JUMBO_CAPABLE; if (pci_find_capability(tp->pdev, PCI_CAP_ID_EXP) != 0) @@ -10392,6 +10660,12 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) pci_cmd &= ~PCI_COMMAND_MEMORY; pci_write_config_word(tp->pdev, PCI_COMMAND, pci_cmd); } + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { + tp->read32_mbox = tg3_read32_mbox_5906; + tp->write32_mbox = tg3_write32_mbox_5906; + tp->write32_tx_mbox = tg3_write32_mbox_5906; + tp->write32_rx_mbox = tg3_write32_mbox_5906; + } if (tp->write32 == tg3_write_indirect_reg32 || ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) && @@ -10463,6 +10737,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) && (tp->pci_chip_rev_id != CHIPREV_ID_5705_A0) && (tp->pci_chip_rev_id != CHIPREV_ID_5705_A1)) || + (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) || (tp->tg3_flags2 & TG3_FLG2_ANY_SERDES)) tp->tg3_flags2 |= TG3_FLG2_NO_ETH_WIRE_SPEED; @@ -10476,7 +10751,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787) tp->tg3_flags2 |= TG3_FLG2_PHY_JITTER_BUG; - else + else if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906) tp->tg3_flags2 |= TG3_FLG2_PHY_BER_BUG; } @@ -10566,7 +10841,8 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) tp->pdev->device == PCI_DEVICE_ID_TIGON3_5705F)) || (tp->pdev->vendor == PCI_VENDOR_ID_BROADCOM && (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5751F || - tp->pdev->device == PCI_DEVICE_ID_TIGON3_5753F))) + tp->pdev->device == PCI_DEVICE_ID_TIGON3_5753F)) || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) tp->tg3_flags |= TG3_FLAG_10_100_ONLY; err = tg3_phy_probe(tp); @@ -10617,7 +10893,8 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) * straddle the 4GB address boundary in some cases. */ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 || - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787) + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787 || + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) tp->dev->hard_start_xmit = tg3_start_xmit; else tp->dev->hard_start_xmit = tg3_start_xmit_dma_bug; @@ -10698,6 +10975,8 @@ static int __devinit tg3_get_device_address(struct tg3 *tp) else tg3_nvram_unlock(tp); } + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) + mac_offset = 0x10; /* First try to get it from MAC address mailbox. */ tg3_read_mem(tp, NIC_SRAM_MAC_ADDR_HIGH_MBOX, &hi); @@ -11181,6 +11460,12 @@ static void __devinit tg3_init_bufmgr_config(struct tg3 *tp) DEFAULT_MB_MACRX_LOW_WATER_5705; tp->bufmgr_config.mbuf_high_water = DEFAULT_MB_HIGH_WATER_5705; + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { + tp->bufmgr_config.mbuf_mac_rx_low_water = + DEFAULT_MB_MACRX_LOW_WATER_5906; + tp->bufmgr_config.mbuf_high_water = + DEFAULT_MB_HIGH_WATER_5906; + } tp->bufmgr_config.mbuf_read_dma_low_water_jumbo = DEFAULT_MB_RDMA_LOW_WATER_JUMBO_5780; @@ -11224,6 +11509,8 @@ static char * __devinit tg3_phy_string(struct tg3 *tp) case PHY_ID_BCM5780: return "5780"; case PHY_ID_BCM5755: return "5755"; case PHY_ID_BCM5787: return "5787"; + case PHY_ID_BCM5756: return "5722/5756"; + case PHY_ID_BCM5906: return "5906"; case PHY_ID_BCM8002: return "8002/serdes"; case 0: return "serdes"; default: return "unknown"; @@ -11526,7 +11813,8 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, */ if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) { dev->features |= NETIF_F_TSO; - if (tp->tg3_flags2 & TG3_FLG2_HW_TSO_2) + if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO_2) && + (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906)) dev->features |= NETIF_F_TSO6; } diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 3ecf356cfb0..92f53000bce 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -24,6 +24,8 @@ #define RX_COPY_THRESHOLD 256 +#define TG3_RX_INTERNAL_RING_SZ_5906 32 + #define RX_STD_MAX_SIZE 1536 #define RX_STD_MAX_SIZE_5705 512 #define RX_JUMBO_MAX_SIZE 0xdeadbeef /* XXX */ @@ -129,6 +131,7 @@ #define CHIPREV_ID_5752_A0_HW 0x5000 #define CHIPREV_ID_5752_A0 0x6000 #define CHIPREV_ID_5752_A1 0x6001 +#define CHIPREV_ID_5906_A1 0xc001 #define GET_ASIC_REV(CHIP_REV_ID) ((CHIP_REV_ID) >> 12) #define ASIC_REV_5700 0x07 #define ASIC_REV_5701 0x00 @@ -141,6 +144,7 @@ #define ASIC_REV_5714 0x09 #define ASIC_REV_5755 0x0a #define ASIC_REV_5787 0x0b +#define ASIC_REV_5906 0x0c #define GET_CHIP_REV(CHIP_REV_ID) ((CHIP_REV_ID) >> 8) #define CHIPREV_5700_AX 0x70 #define CHIPREV_5700_BX 0x71 @@ -646,7 +650,8 @@ #define SNDDATAI_SCTRL_FORCE_ZERO 0x00000010 #define SNDDATAI_STATSENAB 0x00000c0c #define SNDDATAI_STATSINCMASK 0x00000c10 -/* 0xc14 --> 0xc80 unused */ +#define ISO_PKT_TX 0x00000c20 +/* 0xc24 --> 0xc80 unused */ #define SNDDATAI_COS_CNT_0 0x00000c80 #define SNDDATAI_COS_CNT_1 0x00000c84 #define SNDDATAI_COS_CNT_2 0x00000c88 @@ -997,11 +1002,13 @@ #define BUFMGR_MB_MACRX_LOW_WATER 0x00004414 #define DEFAULT_MB_MACRX_LOW_WATER 0x00000020 #define DEFAULT_MB_MACRX_LOW_WATER_5705 0x00000010 +#define DEFAULT_MB_MACRX_LOW_WATER_5906 0x00000004 #define DEFAULT_MB_MACRX_LOW_WATER_JUMBO 0x00000098 #define DEFAULT_MB_MACRX_LOW_WATER_JUMBO_5780 0x0000004b #define BUFMGR_MB_HIGH_WATER 0x00004418 #define DEFAULT_MB_HIGH_WATER 0x00000060 #define DEFAULT_MB_HIGH_WATER_5705 0x00000060 +#define DEFAULT_MB_HIGH_WATER_5906 0x00000010 #define DEFAULT_MB_HIGH_WATER_JUMBO 0x0000017c #define DEFAULT_MB_HIGH_WATER_JUMBO_5780 0x00000096 #define BUFMGR_RX_MB_ALLOC_REQ 0x0000441c @@ -1138,7 +1145,12 @@ #define TX_CPU_STATE 0x00005404 #define TX_CPU_PGMCTR 0x0000541c +#define VCPU_STATUS 0x00005100 +#define VCPU_STATUS_INIT_DONE 0x04000000 +#define VCPU_STATUS_DRV_RESET 0x08000000 + /* Mailboxes */ +#define GRCMBOX_BASE 0x00005600 #define GRCMBOX_INTERRUPT_0 0x00005800 /* 64-bit */ #define GRCMBOX_INTERRUPT_1 0x00005808 /* 64-bit */ #define GRCMBOX_INTERRUPT_2 0x00005810 /* 64-bit */ @@ -1398,7 +1410,10 @@ #define GRC_EEPROM_CTRL 0x00006840 #define GRC_MDI_CTRL 0x00006844 #define GRC_SEEPROM_DELAY 0x00006848 -/* 0x684c --> 0x6c00 unused */ +/* 0x684c --> 0x6890 unused */ +#define GRC_VCPU_EXT_CTRL 0x00006890 +#define GRC_VCPU_EXT_CTRL_HALT_CPU 0x00400000 +#define GRC_VCPU_EXT_CTRL_DISABLE_WOL 0x20000000 #define GRC_FASTBOOT_PC 0x00006894 /* 5752, 5755, 5787 */ /* 0x6c00 --> 0x7000 unused */ @@ -1485,9 +1500,17 @@ #define NVRAM_WRITE1 0x00007028 /* 0x702c --> 0x7400 unused */ -/* 0x7400 --> 0x8000 unused */ +/* 0x7400 --> 0x7c00 unused */ +#define PCIE_TRANSACTION_CFG 0x00007c04 +#define PCIE_TRANS_CFG_1SHOT_MSI 0x20000000 +#define PCIE_TRANS_CFG_LOM 0x00000020 + #define TG3_EEPROM_MAGIC 0x669955aa +#define TG3_EEPROM_MAGIC_FW 0xa5000000 +#define TG3_EEPROM_MAGIC_FW_MSK 0xff000000 +#define TG3_EEPROM_MAGIC_HW 0xabcd +#define TG3_EEPROM_MAGIC_HW_MSK 0xffff /* 32K Window into NIC internal memory */ #define NIC_SRAM_WIN_BASE 0x00008000 @@ -1537,6 +1560,7 @@ #define FWCMD_NICDRV_FIX_DMAR 0x00000005 #define FWCMD_NICDRV_FIX_DMAW 0x00000006 #define FWCMD_NICDRV_ALIVE2 0x0000000d +#define FWCMD_NICDRV_ALIVE3 0x0000000e #define NIC_SRAM_FW_CMD_LEN_MBOX 0x00000b7c #define NIC_SRAM_FW_CMD_DATA_MBOX 0x00000b80 #define NIC_SRAM_FW_ASF_STATUS_MBOX 0x00000c00 @@ -1604,6 +1628,7 @@ #define MII_TG3_DSP_RW_PORT 0x15 /* DSP coefficient read/write port */ #define MII_TG3_DSP_ADDRESS 0x17 /* DSP address register */ +#define MII_TG3_EPHY_PTEST 0x17 /* 5906 PHY register */ #define MII_TG3_AUX_CTRL 0x18 /* auxilliary control register */ @@ -1617,6 +1642,8 @@ #define MII_TG3_AUX_STAT_100FULL 0x0500 #define MII_TG3_AUX_STAT_1000HALF 0x0600 #define MII_TG3_AUX_STAT_1000FULL 0x0700 +#define MII_TG3_AUX_STAT_100 0x0008 +#define MII_TG3_AUX_STAT_FULL 0x0001 #define MII_TG3_ISTAT 0x1a /* IRQ status register */ #define MII_TG3_IMASK 0x1b /* IRQ mask register */ @@ -1627,6 +1654,9 @@ #define MII_TG3_INT_DUPLEXCHG 0x0008 #define MII_TG3_INT_ANEG_PAGE_RX 0x0400 +#define MII_TG3_EPHY_TEST 0x1f /* 5906 PHY register */ +#define MII_TG3_EPHY_SHADOW_EN 0x80 + /* There are two ways to manage the TX descriptors on the tigon3. * Either the descriptors are in host DMA'able memory, or they * exist only in the cards on-chip SRAM. All 16 send bds are under @@ -2203,7 +2233,6 @@ struct tg3 { #define TG3_FLG2_PCI_EXPRESS 0x00000200 #define TG3_FLG2_ASF_NEW_HANDSHAKE 0x00000400 #define TG3_FLG2_HW_AUTONEG 0x00000800 -#define TG3_FLG2_PHY_JUST_INITTED 0x00001000 #define TG3_FLG2_PHY_SERDES 0x00002000 #define TG3_FLG2_CAPACITIVE_COUPLING 0x00004000 #define TG3_FLG2_FLASH 0x00008000 @@ -2236,6 +2265,12 @@ struct tg3 { u16 asf_counter; u16 asf_multiplier; + /* 1 second counter for transient serdes link events */ + u32 serdes_counter; +#define SERDES_AN_TIMEOUT_5704S 2 +#define SERDES_PARALLEL_DET_TIMEOUT 1 +#define SERDES_AN_TIMEOUT_5714S 1 + struct tg3_link_config link_config; struct tg3_bufmgr_config bufmgr_config; @@ -2276,6 +2311,8 @@ struct tg3 { #define PHY_ID_BCM5780 0x60008350 #define PHY_ID_BCM5755 0xbc050cc0 #define PHY_ID_BCM5787 0xbc050ce0 +#define PHY_ID_BCM5756 0xbc050ed0 +#define PHY_ID_BCM5906 0xdc00ac40 #define PHY_ID_BCM8002 0x60010140 #define PHY_ID_INVALID 0xffffffff #define PHY_ID_REV_MASK 0x0000000f @@ -2302,7 +2339,8 @@ struct tg3 { (X) == PHY_ID_BCM5705 || (X) == PHY_ID_BCM5750 || \ (X) == PHY_ID_BCM5752 || (X) == PHY_ID_BCM5714 || \ (X) == PHY_ID_BCM5780 || (X) == PHY_ID_BCM5787 || \ - (X) == PHY_ID_BCM5755 || (X) == PHY_ID_BCM8002) + (X) == PHY_ID_BCM5755 || (X) == PHY_ID_BCM5756 || \ + (X) == PHY_ID_BCM5906 || (X) == PHY_ID_BCM8002) struct tg3_hw_stats *hw_stats; dma_addr_t stats_mapping; diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c index 0d66700c6ce..bfc8c3eae9a 100644 --- a/drivers/net/tokenring/lanstreamer.c +++ b/drivers/net/tokenring/lanstreamer.c @@ -1876,7 +1876,6 @@ static int sprintf_info(char *buffer, struct net_device *dev) datap[size+1]=io_word & 0xff; } - size = sprintf(buffer, "\n%6s: Adapter Address : Node Address : Functional Addr\n", dev->name); size += sprintf(buffer + size, @@ -1932,64 +1931,6 @@ static int sprintf_info(char *buffer, struct net_device *dev) #endif #endif -#if STREAMER_IOCTL && (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)) -static int streamer_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -{ - int i; - struct streamer_private *streamer_priv = (struct streamer_private *) dev->priv; - u8 __iomem *streamer_mmio = streamer_priv->streamer_mmio; - - switch(cmd) { - case IOCTL_SISR_MASK: - writew(SISR_MI, streamer_mmio + SISR_MASK_SUM); - break; - case IOCTL_SPIN_LOCK_TEST: - printk(KERN_INFO "spin_lock() called.\n"); - spin_lock(&streamer_priv->streamer_lock); - spin_unlock(&streamer_priv->streamer_lock); - printk(KERN_INFO "spin_unlock() finished.\n"); - break; - case IOCTL_PRINT_BDAS: - printk(KERN_INFO "bdas: RXBDA: %x RXLBDA: %x TX2FDA: %x TX2LFDA: %x\n", - readw(streamer_mmio + RXBDA), - readw(streamer_mmio + RXLBDA), - readw(streamer_mmio + TX2FDA), - readw(streamer_mmio + TX2LFDA)); - break; - case IOCTL_PRINT_REGISTERS: - printk(KERN_INFO "registers:\n"); - printk(KERN_INFO "SISR: %04x MISR: %04x LISR: %04x BCTL: %04x BMCTL: %04x\nmask %04x mask %04x\n", - readw(streamer_mmio + SISR), - readw(streamer_mmio + MISR_RUM), - readw(streamer_mmio + LISR), - readw(streamer_mmio + BCTL), - readw(streamer_mmio + BMCTL_SUM), - readw(streamer_mmio + SISR_MASK), - readw(streamer_mmio + MISR_MASK)); - break; - case IOCTL_PRINT_RX_BUFS: - printk(KERN_INFO "Print rx bufs:\n"); - for(i=0; i<STREAMER_RX_RING_SIZE; i++) - printk(KERN_INFO "rx_ring %d status: 0x%x\n", i, - streamer_priv->streamer_rx_ring[i].status); - break; - case IOCTL_PRINT_TX_BUFS: - printk(KERN_INFO "Print tx bufs:\n"); - for(i=0; i<STREAMER_TX_RING_SIZE; i++) - printk(KERN_INFO "tx_ring %d status: 0x%x\n", i, - streamer_priv->streamer_tx_ring[i].status); - break; - case IOCTL_RX_CMD: - streamer_rx(dev); - printk(KERN_INFO "Sent rx command.\n"); - break; - default: - printk(KERN_INFO "Bad ioctl!\n"); - } - return 0; -} -#endif - static struct pci_driver streamer_pci_driver = { .name = "lanstreamer", .id_table = streamer_pci_tbl, diff --git a/drivers/net/tokenring/lanstreamer.h b/drivers/net/tokenring/lanstreamer.h index 5557d8e1e22..e7bb3494afc 100644 --- a/drivers/net/tokenring/lanstreamer.h +++ b/drivers/net/tokenring/lanstreamer.h @@ -62,18 +62,6 @@ #include <linux/version.h> -#if STREAMER_IOCTL && (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)) -#include <asm/ioctl.h> -#define IOCTL_PRINT_RX_BUFS SIOCDEVPRIVATE -#define IOCTL_PRINT_TX_BUFS SIOCDEVPRIVATE+1 -#define IOCTL_RX_CMD SIOCDEVPRIVATE+2 -#define IOCTL_TX_CMD SIOCDEVPRIVATE+3 -#define IOCTL_PRINT_REGISTERS SIOCDEVPRIVATE+4 -#define IOCTL_PRINT_BDAS SIOCDEVPRIVATE+5 -#define IOCTL_SPIN_LOCK_TEST SIOCDEVPRIVATE+6 -#define IOCTL_SISR_MASK SIOCDEVPRIVATE+7 -#endif - /* MAX_INTR - the maximum number of times we can loop * inside the interrupt function before returning * control to the OS (maximum value is 256) diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c index e661d0a9cc6..fb5fa7d6888 100644 --- a/drivers/net/tulip/de4x5.c +++ b/drivers/net/tulip/de4x5.c @@ -2114,6 +2114,7 @@ static struct eisa_device_id de4x5_eisa_ids[] = { { "DEC4250", 0 }, /* 0 is the board name index... */ { "" } }; +MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids); static struct eisa_driver de4x5_eisa_driver = { .id_table = de4x5_eisa_ids, diff --git a/drivers/net/tun.c b/drivers/net/tun.c index de8da6dee1b..151a2e10e4f 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -288,11 +288,10 @@ static inline size_t iov_total(const struct iovec *iv, unsigned long count) return len; } -/* Writev */ -static ssize_t tun_chr_writev(struct file * file, const struct iovec *iv, - unsigned long count, loff_t *pos) +static ssize_t tun_chr_aio_write(struct kiocb *iocb, const struct iovec *iv, + unsigned long count, loff_t pos) { - struct tun_struct *tun = file->private_data; + struct tun_struct *tun = iocb->ki_filp->private_data; if (!tun) return -EBADFD; @@ -302,14 +301,6 @@ static ssize_t tun_chr_writev(struct file * file, const struct iovec *iv, return tun_get_user(tun, (struct iovec *) iv, iov_total(iv, count)); } -/* Write */ -static ssize_t tun_chr_write(struct file * file, const char __user * buf, - size_t count, loff_t *pos) -{ - struct iovec iv = { (void __user *) buf, count }; - return tun_chr_writev(file, &iv, 1, pos); -} - /* Put packet to the user space buffer */ static __inline__ ssize_t tun_put_user(struct tun_struct *tun, struct sk_buff *skb, @@ -343,10 +334,10 @@ static __inline__ ssize_t tun_put_user(struct tun_struct *tun, return total; } -/* Readv */ -static ssize_t tun_chr_readv(struct file *file, const struct iovec *iv, - unsigned long count, loff_t *pos) +static ssize_t tun_chr_aio_read(struct kiocb *iocb, const struct iovec *iv, + unsigned long count, loff_t pos) { + struct file *file = iocb->ki_filp; struct tun_struct *tun = file->private_data; DECLARE_WAITQUEUE(wait, current); struct sk_buff *skb; @@ -426,14 +417,6 @@ static ssize_t tun_chr_readv(struct file *file, const struct iovec *iv, return ret; } -/* Read */ -static ssize_t tun_chr_read(struct file * file, char __user * buf, - size_t count, loff_t *pos) -{ - struct iovec iv = { buf, count }; - return tun_chr_readv(file, &iv, 1, pos); -} - static void tun_setup(struct net_device *dev) { struct tun_struct *tun = netdev_priv(dev); @@ -714,7 +697,7 @@ static int tun_chr_fasync(int fd, struct file *file, int on) return ret; if (on) { - ret = f_setown(file, current->pid, 0); + ret = __f_setown(file, task_pid(current), PIDTYPE_PID, 0); if (ret) return ret; tun->flags |= TUN_FASYNC; @@ -764,10 +747,10 @@ static int tun_chr_close(struct inode *inode, struct file *file) static struct file_operations tun_fops = { .owner = THIS_MODULE, .llseek = no_llseek, - .read = tun_chr_read, - .readv = tun_chr_readv, - .write = tun_chr_write, - .writev = tun_chr_writev, + .read = do_sync_read, + .aio_read = tun_chr_aio_read, + .write = do_sync_write, + .aio_write = tun_chr_aio_write, .poll = tun_chr_poll, .ioctl = tun_chr_ioctl, .open = tun_chr_open, diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c index 8f6f6fd8b87..d5c32e9caa9 100644 --- a/drivers/net/typhoon.c +++ b/drivers/net/typhoon.c @@ -333,11 +333,7 @@ enum state_values { #define TYPHOON_RESET_TIMEOUT_NOSLEEP ((6 * 1000000) / TYPHOON_UDELAY) #define TYPHOON_WAIT_TIMEOUT ((1000000 / 2) / TYPHOON_UDELAY) -#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 5, 28) -#define typhoon_synchronize_irq(x) synchronize_irq() -#else #define typhoon_synchronize_irq(x) synchronize_irq(x) -#endif #if defined(NETIF_F_TSO) #define skb_tso_size(x) (skb_shinfo(x)->gso_size) diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index 54b8e492ef9..58b7efbb075 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -154,7 +154,7 @@ config HDLC If unsure, say N. config HDLC_RAW - bool "Raw HDLC support" + tristate "Raw HDLC support" depends on HDLC help Generic HDLC driver supporting raw HDLC over WAN connections. @@ -162,7 +162,7 @@ config HDLC_RAW If unsure, say N. config HDLC_RAW_ETH - bool "Raw HDLC Ethernet device support" + tristate "Raw HDLC Ethernet device support" depends on HDLC help Generic HDLC driver supporting raw HDLC Ethernet device emulation @@ -173,7 +173,7 @@ config HDLC_RAW_ETH If unsure, say N. config HDLC_CISCO - bool "Cisco HDLC support" + tristate "Cisco HDLC support" depends on HDLC help Generic HDLC driver supporting Cisco HDLC over WAN connections. @@ -181,7 +181,7 @@ config HDLC_CISCO If unsure, say N. config HDLC_FR - bool "Frame Relay support" + tristate "Frame Relay support" depends on HDLC help Generic HDLC driver supporting Frame Relay over WAN connections. @@ -189,7 +189,7 @@ config HDLC_FR If unsure, say N. config HDLC_PPP - bool "Synchronous Point-to-Point Protocol (PPP) support" + tristate "Synchronous Point-to-Point Protocol (PPP) support" depends on HDLC help Generic HDLC driver supporting PPP over WAN connections. @@ -197,7 +197,7 @@ config HDLC_PPP If unsure, say N. config HDLC_X25 - bool "X.25 protocol support" + tristate "X.25 protocol support" depends on HDLC && (LAPB=m && HDLC=m || LAPB=y) help Generic HDLC driver supporting X.25 over WAN connections. diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile index 316ca6869d5..83ec2c87ba3 100644 --- a/drivers/net/wan/Makefile +++ b/drivers/net/wan/Makefile @@ -9,14 +9,13 @@ cyclomx-y := cycx_main.o cyclomx-$(CONFIG_CYCLOMX_X25) += cycx_x25.o cyclomx-objs := $(cyclomx-y) -hdlc-y := hdlc_generic.o -hdlc-$(CONFIG_HDLC_RAW) += hdlc_raw.o -hdlc-$(CONFIG_HDLC_RAW_ETH) += hdlc_raw_eth.o -hdlc-$(CONFIG_HDLC_CISCO) += hdlc_cisco.o -hdlc-$(CONFIG_HDLC_FR) += hdlc_fr.o -hdlc-$(CONFIG_HDLC_PPP) += hdlc_ppp.o -hdlc-$(CONFIG_HDLC_X25) += hdlc_x25.o -hdlc-objs := $(hdlc-y) +obj-$(CONFIG_HDLC) += hdlc.o +obj-$(CONFIG_HDLC_RAW) += hdlc_raw.o +obj-$(CONFIG_HDLC_RAW_ETH) += hdlc_raw_eth.o +obj-$(CONFIG_HDLC_CISCO) += hdlc_cisco.o +obj-$(CONFIG_HDLC_FR) += hdlc_fr.o +obj-$(CONFIG_HDLC_PPP) += hdlc_ppp.o syncppp.o +obj-$(CONFIG_HDLC_X25) += hdlc_x25.o pc300-y := pc300_drv.o pc300-$(CONFIG_PC300_MLPPP) += pc300_tty.o @@ -38,10 +37,6 @@ obj-$(CONFIG_CYCLADES_SYNC) += cycx_drv.o cyclomx.o obj-$(CONFIG_LAPBETHER) += lapbether.o obj-$(CONFIG_SBNI) += sbni.o obj-$(CONFIG_PC300) += pc300.o -obj-$(CONFIG_HDLC) += hdlc.o -ifeq ($(CONFIG_HDLC_PPP),y) - obj-$(CONFIG_HDLC) += syncppp.o -endif obj-$(CONFIG_N2) += n2.o obj-$(CONFIG_C101) += c101.o obj-$(CONFIG_WANXL) += wanxl.o diff --git a/drivers/net/wan/hdlc_generic.c b/drivers/net/wan/hdlc.c index 04ca1f7b642..db354e0edbe 100644 --- a/drivers/net/wan/hdlc_generic.c +++ b/drivers/net/wan/hdlc.c @@ -1,7 +1,7 @@ /* * Generic HDLC support routines for Linux * - * Copyright (C) 1999 - 2005 Krzysztof Halasa <khc@pm.waw.pl> + * Copyright (C) 1999 - 2006 Krzysztof Halasa <khc@pm.waw.pl> * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License @@ -17,9 +17,9 @@ * Use sethdlc utility to set line parameters, protocol and PVCs * * How does it work: - * - proto.open(), close(), start(), stop() calls are serialized. + * - proto->open(), close(), start(), stop() calls are serialized. * The order is: open, [ start, stop ... ] close ... - * - proto.start() and stop() are called with spin_lock_irq held. + * - proto->start() and stop() are called with spin_lock_irq held. */ #include <linux/module.h> @@ -38,10 +38,12 @@ #include <linux/hdlc.h> -static const char* version = "HDLC support module revision 1.19"; +static const char* version = "HDLC support module revision 1.20"; #undef DEBUG_LINK +static struct hdlc_proto *first_proto = NULL; + static int hdlc_change_mtu(struct net_device *dev, int new_mtu) { @@ -63,11 +65,11 @@ static struct net_device_stats *hdlc_get_stats(struct net_device *dev) static int hdlc_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *p, struct net_device *orig_dev) { - hdlc_device *hdlc = dev_to_hdlc(dev); - if (hdlc->proto.netif_rx) - return hdlc->proto.netif_rx(skb); + struct hdlc_device_desc *desc = dev_to_desc(dev); + if (desc->netif_rx) + return desc->netif_rx(skb); - hdlc->stats.rx_dropped++; /* Shouldn't happen */ + desc->stats.rx_dropped++; /* Shouldn't happen */ dev_kfree_skb(skb); return NET_RX_DROP; } @@ -77,8 +79,8 @@ static int hdlc_rcv(struct sk_buff *skb, struct net_device *dev, static inline void hdlc_proto_start(struct net_device *dev) { hdlc_device *hdlc = dev_to_hdlc(dev); - if (hdlc->proto.start) - return hdlc->proto.start(dev); + if (hdlc->proto->start) + return hdlc->proto->start(dev); } @@ -86,8 +88,8 @@ static inline void hdlc_proto_start(struct net_device *dev) static inline void hdlc_proto_stop(struct net_device *dev) { hdlc_device *hdlc = dev_to_hdlc(dev); - if (hdlc->proto.stop) - return hdlc->proto.stop(dev); + if (hdlc->proto->stop) + return hdlc->proto->stop(dev); } @@ -144,15 +146,15 @@ int hdlc_open(struct net_device *dev) { hdlc_device *hdlc = dev_to_hdlc(dev); #ifdef DEBUG_LINK - printk(KERN_DEBUG "hdlc_open() carrier %i open %i\n", + printk(KERN_DEBUG "%s: hdlc_open() carrier %i open %i\n", dev->name, hdlc->carrier, hdlc->open); #endif - if (hdlc->proto.id == -1) + if (hdlc->proto == NULL) return -ENOSYS; /* no protocol attached */ - if (hdlc->proto.open) { - int result = hdlc->proto.open(dev); + if (hdlc->proto->open) { + int result = hdlc->proto->open(dev); if (result) return result; } @@ -178,7 +180,7 @@ void hdlc_close(struct net_device *dev) { hdlc_device *hdlc = dev_to_hdlc(dev); #ifdef DEBUG_LINK - printk(KERN_DEBUG "hdlc_close() carrier %i open %i\n", + printk(KERN_DEBUG "%s: hdlc_close() carrier %i open %i\n", dev->name, hdlc->carrier, hdlc->open); #endif @@ -190,68 +192,34 @@ void hdlc_close(struct net_device *dev) spin_unlock_irq(&hdlc->state_lock); - if (hdlc->proto.close) - hdlc->proto.close(dev); + if (hdlc->proto->close) + hdlc->proto->close(dev); } -#ifndef CONFIG_HDLC_RAW -#define hdlc_raw_ioctl(dev, ifr) -ENOSYS -#endif - -#ifndef CONFIG_HDLC_RAW_ETH -#define hdlc_raw_eth_ioctl(dev, ifr) -ENOSYS -#endif - -#ifndef CONFIG_HDLC_PPP -#define hdlc_ppp_ioctl(dev, ifr) -ENOSYS -#endif - -#ifndef CONFIG_HDLC_CISCO -#define hdlc_cisco_ioctl(dev, ifr) -ENOSYS -#endif - -#ifndef CONFIG_HDLC_FR -#define hdlc_fr_ioctl(dev, ifr) -ENOSYS -#endif - -#ifndef CONFIG_HDLC_X25 -#define hdlc_x25_ioctl(dev, ifr) -ENOSYS -#endif - - int hdlc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) { - hdlc_device *hdlc = dev_to_hdlc(dev); - unsigned int proto; + struct hdlc_proto *proto = first_proto; + int result; if (cmd != SIOCWANDEV) return -EINVAL; - switch(ifr->ifr_settings.type) { - case IF_PROTO_HDLC: - case IF_PROTO_HDLC_ETH: - case IF_PROTO_PPP: - case IF_PROTO_CISCO: - case IF_PROTO_FR: - case IF_PROTO_X25: - proto = ifr->ifr_settings.type; - break; - - default: - proto = hdlc->proto.id; + if (dev_to_hdlc(dev)->proto) { + result = dev_to_hdlc(dev)->proto->ioctl(dev, ifr); + if (result != -EINVAL) + return result; } - switch(proto) { - case IF_PROTO_HDLC: return hdlc_raw_ioctl(dev, ifr); - case IF_PROTO_HDLC_ETH: return hdlc_raw_eth_ioctl(dev, ifr); - case IF_PROTO_PPP: return hdlc_ppp_ioctl(dev, ifr); - case IF_PROTO_CISCO: return hdlc_cisco_ioctl(dev, ifr); - case IF_PROTO_FR: return hdlc_fr_ioctl(dev, ifr); - case IF_PROTO_X25: return hdlc_x25_ioctl(dev, ifr); - default: return -EINVAL; + /* Not handled by currently attached protocol (if any) */ + + while (proto) { + if ((result = proto->ioctl(dev, ifr)) != -EINVAL) + return result; + proto = proto->next; } + return -EINVAL; } void hdlc_setup(struct net_device *dev) @@ -267,8 +235,6 @@ void hdlc_setup(struct net_device *dev) dev->flags = IFF_POINTOPOINT | IFF_NOARP; - hdlc->proto.id = -1; - hdlc->proto.detach = NULL; hdlc->carrier = 1; hdlc->open = 0; spin_lock_init(&hdlc->state_lock); @@ -277,7 +243,8 @@ void hdlc_setup(struct net_device *dev) struct net_device *alloc_hdlcdev(void *priv) { struct net_device *dev; - dev = alloc_netdev(sizeof(hdlc_device), "hdlc%d", hdlc_setup); + dev = alloc_netdev(sizeof(struct hdlc_device_desc) + + sizeof(hdlc_device), "hdlc%d", hdlc_setup); if (dev) dev_to_hdlc(dev)->priv = priv; return dev; @@ -286,13 +253,71 @@ struct net_device *alloc_hdlcdev(void *priv) void unregister_hdlc_device(struct net_device *dev) { rtnl_lock(); - hdlc_proto_detach(dev_to_hdlc(dev)); unregister_netdevice(dev); + detach_hdlc_protocol(dev); rtnl_unlock(); } +int attach_hdlc_protocol(struct net_device *dev, struct hdlc_proto *proto, + int (*rx)(struct sk_buff *skb), size_t size) +{ + detach_hdlc_protocol(dev); + + if (!try_module_get(proto->module)) + return -ENOSYS; + + if (size) + if ((dev_to_hdlc(dev)->state = kmalloc(size, + GFP_KERNEL)) == NULL) { + printk(KERN_WARNING "Memory squeeze on" + " hdlc_proto_attach()\n"); + module_put(proto->module); + return -ENOBUFS; + } + dev_to_hdlc(dev)->proto = proto; + dev_to_desc(dev)->netif_rx = rx; + return 0; +} + + +void detach_hdlc_protocol(struct net_device *dev) +{ + hdlc_device *hdlc = dev_to_hdlc(dev); + + if (hdlc->proto) { + if (hdlc->proto->detach) + hdlc->proto->detach(dev); + module_put(hdlc->proto->module); + hdlc->proto = NULL; + } + kfree(hdlc->state); + hdlc->state = NULL; +} + + +void register_hdlc_protocol(struct hdlc_proto *proto) +{ + proto->next = first_proto; + first_proto = proto; +} + + +void unregister_hdlc_protocol(struct hdlc_proto *proto) +{ + struct hdlc_proto **p = &first_proto; + while (*p) { + if (*p == proto) { + *p = proto->next; + return; + } + p = &((*p)->next); + } +} + + + MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>"); MODULE_DESCRIPTION("HDLC support module"); MODULE_LICENSE("GPL v2"); @@ -303,6 +328,10 @@ EXPORT_SYMBOL(hdlc_ioctl); EXPORT_SYMBOL(hdlc_setup); EXPORT_SYMBOL(alloc_hdlcdev); EXPORT_SYMBOL(unregister_hdlc_device); +EXPORT_SYMBOL(register_hdlc_protocol); +EXPORT_SYMBOL(unregister_hdlc_protocol); +EXPORT_SYMBOL(attach_hdlc_protocol); +EXPORT_SYMBOL(detach_hdlc_protocol); static struct packet_type hdlc_packet_type = { .type = __constant_htons(ETH_P_HDLC), diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c index f289daba0c7..b0bc5ddcf1b 100644 --- a/drivers/net/wan/hdlc_cisco.c +++ b/drivers/net/wan/hdlc_cisco.c @@ -2,7 +2,7 @@ * Generic HDLC support routines for Linux * Cisco HDLC support * - * Copyright (C) 2000 - 2003 Krzysztof Halasa <khc@pm.waw.pl> + * Copyright (C) 2000 - 2006 Krzysztof Halasa <khc@pm.waw.pl> * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License @@ -34,17 +34,56 @@ #define CISCO_KEEPALIVE_REQ 2 /* Cisco keepalive request */ +struct hdlc_header { + u8 address; + u8 control; + u16 protocol; +}__attribute__ ((packed)); + + +struct cisco_packet { + u32 type; /* code */ + u32 par1; + u32 par2; + u16 rel; /* reliability */ + u32 time; +}__attribute__ ((packed)); +#define CISCO_PACKET_LEN 18 +#define CISCO_BIG_PACKET_LEN 20 + + +struct cisco_state { + cisco_proto settings; + + struct timer_list timer; + unsigned long last_poll; + int up; + int request_sent; + u32 txseq; /* TX sequence number */ + u32 rxseq; /* RX sequence number */ +}; + + +static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr); + + +static inline struct cisco_state * state(hdlc_device *hdlc) +{ + return(struct cisco_state *)(hdlc->state); +} + + static int cisco_hard_header(struct sk_buff *skb, struct net_device *dev, u16 type, void *daddr, void *saddr, unsigned int len) { - hdlc_header *data; + struct hdlc_header *data; #ifdef DEBUG_HARD_HEADER printk(KERN_DEBUG "%s: cisco_hard_header called\n", dev->name); #endif - skb_push(skb, sizeof(hdlc_header)); - data = (hdlc_header*)skb->data; + skb_push(skb, sizeof(struct hdlc_header)); + data = (struct hdlc_header*)skb->data; if (type == CISCO_KEEPALIVE) data->address = CISCO_MULTICAST; else @@ -52,7 +91,7 @@ static int cisco_hard_header(struct sk_buff *skb, struct net_device *dev, data->control = 0; data->protocol = htons(type); - return sizeof(hdlc_header); + return sizeof(struct hdlc_header); } @@ -61,9 +100,10 @@ static void cisco_keepalive_send(struct net_device *dev, u32 type, u32 par1, u32 par2) { struct sk_buff *skb; - cisco_packet *data; + struct cisco_packet *data; - skb = dev_alloc_skb(sizeof(hdlc_header) + sizeof(cisco_packet)); + skb = dev_alloc_skb(sizeof(struct hdlc_header) + + sizeof(struct cisco_packet)); if (!skb) { printk(KERN_WARNING "%s: Memory squeeze on cisco_keepalive_send()\n", @@ -72,7 +112,7 @@ static void cisco_keepalive_send(struct net_device *dev, u32 type, } skb_reserve(skb, 4); cisco_hard_header(skb, dev, CISCO_KEEPALIVE, NULL, NULL, 0); - data = (cisco_packet*)(skb->data + 4); + data = (struct cisco_packet*)(skb->data + 4); data->type = htonl(type); data->par1 = htonl(par1); @@ -81,7 +121,7 @@ static void cisco_keepalive_send(struct net_device *dev, u32 type, /* we will need do_div here if 1000 % HZ != 0 */ data->time = htonl((jiffies - INITIAL_JIFFIES) * (1000 / HZ)); - skb_put(skb, sizeof(cisco_packet)); + skb_put(skb, sizeof(struct cisco_packet)); skb->priority = TC_PRIO_CONTROL; skb->dev = dev; skb->nh.raw = skb->data; @@ -93,9 +133,9 @@ static void cisco_keepalive_send(struct net_device *dev, u32 type, static __be16 cisco_type_trans(struct sk_buff *skb, struct net_device *dev) { - hdlc_header *data = (hdlc_header*)skb->data; + struct hdlc_header *data = (struct hdlc_header*)skb->data; - if (skb->len < sizeof(hdlc_header)) + if (skb->len < sizeof(struct hdlc_header)) return __constant_htons(ETH_P_HDLC); if (data->address != CISCO_MULTICAST && @@ -106,7 +146,7 @@ static __be16 cisco_type_trans(struct sk_buff *skb, struct net_device *dev) case __constant_htons(ETH_P_IP): case __constant_htons(ETH_P_IPX): case __constant_htons(ETH_P_IPV6): - skb_pull(skb, sizeof(hdlc_header)); + skb_pull(skb, sizeof(struct hdlc_header)); return data->protocol; default: return __constant_htons(ETH_P_HDLC); @@ -118,12 +158,12 @@ static int cisco_rx(struct sk_buff *skb) { struct net_device *dev = skb->dev; hdlc_device *hdlc = dev_to_hdlc(dev); - hdlc_header *data = (hdlc_header*)skb->data; - cisco_packet *cisco_data; + struct hdlc_header *data = (struct hdlc_header*)skb->data; + struct cisco_packet *cisco_data; struct in_device *in_dev; - u32 addr, mask; + __be32 addr, mask; - if (skb->len < sizeof(hdlc_header)) + if (skb->len < sizeof(struct hdlc_header)) goto rx_error; if (data->address != CISCO_MULTICAST && @@ -137,15 +177,17 @@ static int cisco_rx(struct sk_buff *skb) return NET_RX_SUCCESS; case CISCO_KEEPALIVE: - if (skb->len != sizeof(hdlc_header) + CISCO_PACKET_LEN && - skb->len != sizeof(hdlc_header) + CISCO_BIG_PACKET_LEN) { - printk(KERN_INFO "%s: Invalid length of Cisco " - "control packet (%d bytes)\n", - dev->name, skb->len); + if ((skb->len != sizeof(struct hdlc_header) + + CISCO_PACKET_LEN) && + (skb->len != sizeof(struct hdlc_header) + + CISCO_BIG_PACKET_LEN)) { + printk(KERN_INFO "%s: Invalid length of Cisco control" + " packet (%d bytes)\n", dev->name, skb->len); goto rx_error; } - cisco_data = (cisco_packet*)(skb->data + sizeof(hdlc_header)); + cisco_data = (struct cisco_packet*)(skb->data + sizeof + (struct hdlc_header)); switch(ntohl (cisco_data->type)) { case CISCO_ADDR_REQ: /* Stolen from syncppp.c :-) */ @@ -178,11 +220,11 @@ static int cisco_rx(struct sk_buff *skb) goto rx_error; case CISCO_KEEPALIVE_REQ: - hdlc->state.cisco.rxseq = ntohl(cisco_data->par1); - if (hdlc->state.cisco.request_sent && - ntohl(cisco_data->par2)==hdlc->state.cisco.txseq) { - hdlc->state.cisco.last_poll = jiffies; - if (!hdlc->state.cisco.up) { + state(hdlc)->rxseq = ntohl(cisco_data->par1); + if (state(hdlc)->request_sent && + ntohl(cisco_data->par2) == state(hdlc)->txseq) { + state(hdlc)->last_poll = jiffies; + if (!state(hdlc)->up) { u32 sec, min, hrs, days; sec = ntohl(cisco_data->time) / 1000; min = sec / 60; sec -= min * 60; @@ -193,7 +235,7 @@ static int cisco_rx(struct sk_buff *skb) dev->name, days, hrs, min, sec); netif_dormant_off(dev); - hdlc->state.cisco.up = 1; + state(hdlc)->up = 1; } } @@ -208,7 +250,7 @@ static int cisco_rx(struct sk_buff *skb) return NET_RX_DROP; rx_error: - hdlc->stats.rx_errors++; /* Mark error */ + dev_to_desc(dev)->stats.rx_errors++; /* Mark error */ dev_kfree_skb_any(skb); return NET_RX_DROP; } @@ -220,23 +262,22 @@ static void cisco_timer(unsigned long arg) struct net_device *dev = (struct net_device *)arg; hdlc_device *hdlc = dev_to_hdlc(dev); - if (hdlc->state.cisco.up && - time_after(jiffies, hdlc->state.cisco.last_poll + - hdlc->state.cisco.settings.timeout * HZ)) { - hdlc->state.cisco.up = 0; + if (state(hdlc)->up && + time_after(jiffies, state(hdlc)->last_poll + + state(hdlc)->settings.timeout * HZ)) { + state(hdlc)->up = 0; printk(KERN_INFO "%s: Link down\n", dev->name); netif_dormant_on(dev); } - cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ, - ++hdlc->state.cisco.txseq, - hdlc->state.cisco.rxseq); - hdlc->state.cisco.request_sent = 1; - hdlc->state.cisco.timer.expires = jiffies + - hdlc->state.cisco.settings.interval * HZ; - hdlc->state.cisco.timer.function = cisco_timer; - hdlc->state.cisco.timer.data = arg; - add_timer(&hdlc->state.cisco.timer); + cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ, ++state(hdlc)->txseq, + state(hdlc)->rxseq); + state(hdlc)->request_sent = 1; + state(hdlc)->timer.expires = jiffies + + state(hdlc)->settings.interval * HZ; + state(hdlc)->timer.function = cisco_timer; + state(hdlc)->timer.data = arg; + add_timer(&state(hdlc)->timer); } @@ -244,15 +285,15 @@ static void cisco_timer(unsigned long arg) static void cisco_start(struct net_device *dev) { hdlc_device *hdlc = dev_to_hdlc(dev); - hdlc->state.cisco.up = 0; - hdlc->state.cisco.request_sent = 0; - hdlc->state.cisco.txseq = hdlc->state.cisco.rxseq = 0; - - init_timer(&hdlc->state.cisco.timer); - hdlc->state.cisco.timer.expires = jiffies + HZ; /*First poll after 1s*/ - hdlc->state.cisco.timer.function = cisco_timer; - hdlc->state.cisco.timer.data = (unsigned long)dev; - add_timer(&hdlc->state.cisco.timer); + state(hdlc)->up = 0; + state(hdlc)->request_sent = 0; + state(hdlc)->txseq = state(hdlc)->rxseq = 0; + + init_timer(&state(hdlc)->timer); + state(hdlc)->timer.expires = jiffies + HZ; /*First poll after 1s*/ + state(hdlc)->timer.function = cisco_timer; + state(hdlc)->timer.data = (unsigned long)dev; + add_timer(&state(hdlc)->timer); } @@ -260,15 +301,24 @@ static void cisco_start(struct net_device *dev) static void cisco_stop(struct net_device *dev) { hdlc_device *hdlc = dev_to_hdlc(dev); - del_timer_sync(&hdlc->state.cisco.timer); + del_timer_sync(&state(hdlc)->timer); netif_dormant_on(dev); - hdlc->state.cisco.up = 0; - hdlc->state.cisco.request_sent = 0; + state(hdlc)->up = 0; + state(hdlc)->request_sent = 0; } -int hdlc_cisco_ioctl(struct net_device *dev, struct ifreq *ifr) +static struct hdlc_proto proto = { + .start = cisco_start, + .stop = cisco_stop, + .type_trans = cisco_type_trans, + .ioctl = cisco_ioctl, + .module = THIS_MODULE, +}; + + +static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr) { cisco_proto __user *cisco_s = ifr->ifr_settings.ifs_ifsu.cisco; const size_t size = sizeof(cisco_proto); @@ -278,12 +328,14 @@ int hdlc_cisco_ioctl(struct net_device *dev, struct ifreq *ifr) switch (ifr->ifr_settings.type) { case IF_GET_PROTO: + if (dev_to_hdlc(dev)->proto != &proto) + return -EINVAL; ifr->ifr_settings.type = IF_PROTO_CISCO; if (ifr->ifr_settings.size < size) { ifr->ifr_settings.size = size; /* data size wanted */ return -ENOBUFS; } - if (copy_to_user(cisco_s, &hdlc->state.cisco.settings, size)) + if (copy_to_user(cisco_s, &state(hdlc)->settings, size)) return -EFAULT; return 0; @@ -302,19 +354,15 @@ int hdlc_cisco_ioctl(struct net_device *dev, struct ifreq *ifr) return -EINVAL; result=hdlc->attach(dev, ENCODING_NRZ,PARITY_CRC16_PR1_CCITT); - if (result) return result; - hdlc_proto_detach(hdlc); - memcpy(&hdlc->state.cisco.settings, &new_settings, size); - memset(&hdlc->proto, 0, sizeof(hdlc->proto)); + result = attach_hdlc_protocol(dev, &proto, cisco_rx, + sizeof(struct cisco_state)); + if (result) + return result; - hdlc->proto.start = cisco_start; - hdlc->proto.stop = cisco_stop; - hdlc->proto.netif_rx = cisco_rx; - hdlc->proto.type_trans = cisco_type_trans; - hdlc->proto.id = IF_PROTO_CISCO; + memcpy(&state(hdlc)->settings, &new_settings, size); dev->hard_start_xmit = hdlc->xmit; dev->hard_header = cisco_hard_header; dev->hard_header_cache = NULL; @@ -327,3 +375,25 @@ int hdlc_cisco_ioctl(struct net_device *dev, struct ifreq *ifr) return -EINVAL; } + + +static int __init mod_init(void) +{ + register_hdlc_protocol(&proto); + return 0; +} + + + +static void __exit mod_exit(void) +{ + unregister_hdlc_protocol(&proto); +} + + +module_init(mod_init); +module_exit(mod_exit); + +MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>"); +MODULE_DESCRIPTION("Cisco HDLC protocol support for generic HDLC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c index 7bb737bbdeb..b45ab680d2d 100644 --- a/drivers/net/wan/hdlc_fr.c +++ b/drivers/net/wan/hdlc_fr.c @@ -2,7 +2,7 @@ * Generic HDLC support routines for Linux * Frame Relay support * - * Copyright (C) 1999 - 2005 Krzysztof Halasa <khc@pm.waw.pl> + * Copyright (C) 1999 - 2006 Krzysztof Halasa <khc@pm.waw.pl> * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License @@ -52,6 +52,8 @@ #undef DEBUG_PKT #undef DEBUG_ECN #undef DEBUG_LINK +#undef DEBUG_PROTO +#undef DEBUG_PVC #define FR_UI 0x03 #define FR_PAD 0x00 @@ -115,13 +117,53 @@ typedef struct { }__attribute__ ((packed)) fr_hdr; +typedef struct pvc_device_struct { + struct net_device *frad; + struct net_device *main; + struct net_device *ether; /* bridged Ethernet interface */ + struct pvc_device_struct *next; /* Sorted in ascending DLCI order */ + int dlci; + int open_count; + + struct { + unsigned int new: 1; + unsigned int active: 1; + unsigned int exist: 1; + unsigned int deleted: 1; + unsigned int fecn: 1; + unsigned int becn: 1; + unsigned int bandwidth; /* Cisco LMI reporting only */ + }state; +}pvc_device; + + +struct frad_state { + fr_proto settings; + pvc_device *first_pvc; + int dce_pvc_count; + + struct timer_list timer; + unsigned long last_poll; + int reliable; + int dce_changed; + int request; + int fullrep_sent; + u32 last_errors; /* last errors bit list */ + u8 n391cnt; + u8 txseq; /* TX sequence number */ + u8 rxseq; /* RX sequence number */ +}; + + +static int fr_ioctl(struct net_device *dev, struct ifreq *ifr); + + static inline u16 q922_to_dlci(u8 *hdr) { return ((hdr[0] & 0xFC) << 2) | ((hdr[1] & 0xF0) >> 4); } - static inline void dlci_to_q922(u8 *hdr, u16 dlci) { hdr[0] = (dlci >> 2) & 0xFC; @@ -129,10 +171,21 @@ static inline void dlci_to_q922(u8 *hdr, u16 dlci) } +static inline struct frad_state * state(hdlc_device *hdlc) +{ + return(struct frad_state *)(hdlc->state); +} + + +static __inline__ pvc_device* dev_to_pvc(struct net_device *dev) +{ + return dev->priv; +} + static inline pvc_device* find_pvc(hdlc_device *hdlc, u16 dlci) { - pvc_device *pvc = hdlc->state.fr.first_pvc; + pvc_device *pvc = state(hdlc)->first_pvc; while (pvc) { if (pvc->dlci == dlci) @@ -146,10 +199,10 @@ static inline pvc_device* find_pvc(hdlc_device *hdlc, u16 dlci) } -static inline pvc_device* add_pvc(struct net_device *dev, u16 dlci) +static pvc_device* add_pvc(struct net_device *dev, u16 dlci) { hdlc_device *hdlc = dev_to_hdlc(dev); - pvc_device *pvc, **pvc_p = &hdlc->state.fr.first_pvc; + pvc_device *pvc, **pvc_p = &state(hdlc)->first_pvc; while (*pvc_p) { if ((*pvc_p)->dlci == dlci) @@ -160,12 +213,15 @@ static inline pvc_device* add_pvc(struct net_device *dev, u16 dlci) } pvc = kmalloc(sizeof(pvc_device), GFP_ATOMIC); +#ifdef DEBUG_PVC + printk(KERN_DEBUG "add_pvc: allocated pvc %p, frad %p\n", pvc, dev); +#endif if (!pvc) return NULL; memset(pvc, 0, sizeof(pvc_device)); pvc->dlci = dlci; - pvc->master = dev; + pvc->frad = dev; pvc->next = *pvc_p; /* Put it in the chain */ *pvc_p = pvc; return pvc; @@ -174,7 +230,7 @@ static inline pvc_device* add_pvc(struct net_device *dev, u16 dlci) static inline int pvc_is_used(pvc_device *pvc) { - return pvc->main != NULL || pvc->ether != NULL; + return pvc->main || pvc->ether; } @@ -200,11 +256,14 @@ static inline void pvc_carrier(int on, pvc_device *pvc) static inline void delete_unused_pvcs(hdlc_device *hdlc) { - pvc_device **pvc_p = &hdlc->state.fr.first_pvc; + pvc_device **pvc_p = &state(hdlc)->first_pvc; while (*pvc_p) { if (!pvc_is_used(*pvc_p)) { pvc_device *pvc = *pvc_p; +#ifdef DEBUG_PVC + printk(KERN_DEBUG "freeing unused pvc: %p\n", pvc); +#endif *pvc_p = pvc->next; kfree(pvc); continue; @@ -295,16 +354,16 @@ static int pvc_open(struct net_device *dev) { pvc_device *pvc = dev_to_pvc(dev); - if ((pvc->master->flags & IFF_UP) == 0) - return -EIO; /* Master must be UP in order to activate PVC */ + if ((pvc->frad->flags & IFF_UP) == 0) + return -EIO; /* Frad must be UP in order to activate PVC */ if (pvc->open_count++ == 0) { - hdlc_device *hdlc = dev_to_hdlc(pvc->master); - if (hdlc->state.fr.settings.lmi == LMI_NONE) - pvc->state.active = netif_carrier_ok(pvc->master); + hdlc_device *hdlc = dev_to_hdlc(pvc->frad); + if (state(hdlc)->settings.lmi == LMI_NONE) + pvc->state.active = netif_carrier_ok(pvc->frad); pvc_carrier(pvc->state.active, pvc); - hdlc->state.fr.dce_changed = 1; + state(hdlc)->dce_changed = 1; } return 0; } @@ -316,12 +375,12 @@ static int pvc_close(struct net_device *dev) pvc_device *pvc = dev_to_pvc(dev); if (--pvc->open_count == 0) { - hdlc_device *hdlc = dev_to_hdlc(pvc->master); - if (hdlc->state.fr.settings.lmi == LMI_NONE) + hdlc_device *hdlc = dev_to_hdlc(pvc->frad); + if (state(hdlc)->settings.lmi == LMI_NONE) pvc->state.active = 0; - if (hdlc->state.fr.settings.dce) { - hdlc->state.fr.dce_changed = 1; + if (state(hdlc)->settings.dce) { + state(hdlc)->dce_changed = 1; pvc->state.active = 0; } } @@ -348,7 +407,7 @@ static int pvc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) } info.dlci = pvc->dlci; - memcpy(info.master, pvc->master->name, IFNAMSIZ); + memcpy(info.master, pvc->frad->name, IFNAMSIZ); if (copy_to_user(ifr->ifr_settings.ifs_ifsu.fr_pvc_info, &info, sizeof(info))) return -EFAULT; @@ -361,7 +420,7 @@ static int pvc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) static inline struct net_device_stats *pvc_get_stats(struct net_device *dev) { - return netdev_priv(dev); + return &dev_to_desc(dev)->stats; } @@ -393,7 +452,7 @@ static int pvc_xmit(struct sk_buff *skb, struct net_device *dev) stats->tx_packets++; if (pvc->state.fecn) /* TX Congestion counter */ stats->tx_compressed++; - skb->dev = pvc->master; + skb->dev = pvc->frad; dev_queue_xmit(skb); return 0; } @@ -419,7 +478,7 @@ static int pvc_change_mtu(struct net_device *dev, int new_mtu) static inline void fr_log_dlci_active(pvc_device *pvc) { printk(KERN_INFO "%s: DLCI %d [%s%s%s]%s %s\n", - pvc->master->name, + pvc->frad->name, pvc->dlci, pvc->main ? pvc->main->name : "", pvc->main && pvc->ether ? " " : "", @@ -438,21 +497,20 @@ static inline u8 fr_lmi_nextseq(u8 x) } - static void fr_lmi_send(struct net_device *dev, int fullrep) { hdlc_device *hdlc = dev_to_hdlc(dev); struct sk_buff *skb; - pvc_device *pvc = hdlc->state.fr.first_pvc; - int lmi = hdlc->state.fr.settings.lmi; - int dce = hdlc->state.fr.settings.dce; + pvc_device *pvc = state(hdlc)->first_pvc; + int lmi = state(hdlc)->settings.lmi; + int dce = state(hdlc)->settings.dce; int len = lmi == LMI_ANSI ? LMI_ANSI_LENGTH : LMI_CCITT_CISCO_LENGTH; int stat_len = (lmi == LMI_CISCO) ? 6 : 3; u8 *data; int i = 0; if (dce && fullrep) { - len += hdlc->state.fr.dce_pvc_count * (2 + stat_len); + len += state(hdlc)->dce_pvc_count * (2 + stat_len); if (len > HDLC_MAX_MRU) { printk(KERN_WARNING "%s: Too many PVCs while sending " "LMI full report\n", dev->name); @@ -486,8 +544,9 @@ static void fr_lmi_send(struct net_device *dev, int fullrep) data[i++] = fullrep ? LMI_FULLREP : LMI_INTEGRITY; data[i++] = lmi == LMI_CCITT ? LMI_CCITT_ALIVE : LMI_ANSI_CISCO_ALIVE; data[i++] = LMI_INTEG_LEN; - data[i++] = hdlc->state.fr.txseq =fr_lmi_nextseq(hdlc->state.fr.txseq); - data[i++] = hdlc->state.fr.rxseq; + data[i++] = state(hdlc)->txseq = + fr_lmi_nextseq(state(hdlc)->txseq); + data[i++] = state(hdlc)->rxseq; if (dce && fullrep) { while (pvc) { @@ -496,7 +555,7 @@ static void fr_lmi_send(struct net_device *dev, int fullrep) data[i++] = stat_len; /* LMI start/restart */ - if (hdlc->state.fr.reliable && !pvc->state.exist) { + if (state(hdlc)->reliable && !pvc->state.exist) { pvc->state.exist = pvc->state.new = 1; fr_log_dlci_active(pvc); } @@ -541,15 +600,15 @@ static void fr_lmi_send(struct net_device *dev, int fullrep) static void fr_set_link_state(int reliable, struct net_device *dev) { hdlc_device *hdlc = dev_to_hdlc(dev); - pvc_device *pvc = hdlc->state.fr.first_pvc; + pvc_device *pvc = state(hdlc)->first_pvc; - hdlc->state.fr.reliable = reliable; + state(hdlc)->reliable = reliable; if (reliable) { netif_dormant_off(dev); - hdlc->state.fr.n391cnt = 0; /* Request full status */ - hdlc->state.fr.dce_changed = 1; + state(hdlc)->n391cnt = 0; /* Request full status */ + state(hdlc)->dce_changed = 1; - if (hdlc->state.fr.settings.lmi == LMI_NONE) { + if (state(hdlc)->settings.lmi == LMI_NONE) { while (pvc) { /* Activate all PVCs */ pvc_carrier(1, pvc); pvc->state.exist = pvc->state.active = 1; @@ -563,7 +622,7 @@ static void fr_set_link_state(int reliable, struct net_device *dev) pvc_carrier(0, pvc); pvc->state.exist = pvc->state.active = 0; pvc->state.new = 0; - if (!hdlc->state.fr.settings.dce) + if (!state(hdlc)->settings.dce) pvc->state.bandwidth = 0; pvc = pvc->next; } @@ -571,7 +630,6 @@ static void fr_set_link_state(int reliable, struct net_device *dev) } - static void fr_timer(unsigned long arg) { struct net_device *dev = (struct net_device *)arg; @@ -579,62 +637,61 @@ static void fr_timer(unsigned long arg) int i, cnt = 0, reliable; u32 list; - if (hdlc->state.fr.settings.dce) { - reliable = hdlc->state.fr.request && - time_before(jiffies, hdlc->state.fr.last_poll + - hdlc->state.fr.settings.t392 * HZ); - hdlc->state.fr.request = 0; + if (state(hdlc)->settings.dce) { + reliable = state(hdlc)->request && + time_before(jiffies, state(hdlc)->last_poll + + state(hdlc)->settings.t392 * HZ); + state(hdlc)->request = 0; } else { - hdlc->state.fr.last_errors <<= 1; /* Shift the list */ - if (hdlc->state.fr.request) { - if (hdlc->state.fr.reliable) + state(hdlc)->last_errors <<= 1; /* Shift the list */ + if (state(hdlc)->request) { + if (state(hdlc)->reliable) printk(KERN_INFO "%s: No LMI status reply " "received\n", dev->name); - hdlc->state.fr.last_errors |= 1; + state(hdlc)->last_errors |= 1; } - list = hdlc->state.fr.last_errors; - for (i = 0; i < hdlc->state.fr.settings.n393; i++, list >>= 1) + list = state(hdlc)->last_errors; + for (i = 0; i < state(hdlc)->settings.n393; i++, list >>= 1) cnt += (list & 1); /* errors count */ - reliable = (cnt < hdlc->state.fr.settings.n392); + reliable = (cnt < state(hdlc)->settings.n392); } - if (hdlc->state.fr.reliable != reliable) { + if (state(hdlc)->reliable != reliable) { printk(KERN_INFO "%s: Link %sreliable\n", dev->name, reliable ? "" : "un"); fr_set_link_state(reliable, dev); } - if (hdlc->state.fr.settings.dce) - hdlc->state.fr.timer.expires = jiffies + - hdlc->state.fr.settings.t392 * HZ; + if (state(hdlc)->settings.dce) + state(hdlc)->timer.expires = jiffies + + state(hdlc)->settings.t392 * HZ; else { - if (hdlc->state.fr.n391cnt) - hdlc->state.fr.n391cnt--; + if (state(hdlc)->n391cnt) + state(hdlc)->n391cnt--; - fr_lmi_send(dev, hdlc->state.fr.n391cnt == 0); + fr_lmi_send(dev, state(hdlc)->n391cnt == 0); - hdlc->state.fr.last_poll = jiffies; - hdlc->state.fr.request = 1; - hdlc->state.fr.timer.expires = jiffies + - hdlc->state.fr.settings.t391 * HZ; + state(hdlc)->last_poll = jiffies; + state(hdlc)->request = 1; + state(hdlc)->timer.expires = jiffies + + state(hdlc)->settings.t391 * HZ; } - hdlc->state.fr.timer.function = fr_timer; - hdlc->state.fr.timer.data = arg; - add_timer(&hdlc->state.fr.timer); + state(hdlc)->timer.function = fr_timer; + state(hdlc)->timer.data = arg; + add_timer(&state(hdlc)->timer); } - static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) { hdlc_device *hdlc = dev_to_hdlc(dev); pvc_device *pvc; u8 rxseq, txseq; - int lmi = hdlc->state.fr.settings.lmi; - int dce = hdlc->state.fr.settings.dce; + int lmi = state(hdlc)->settings.lmi; + int dce = state(hdlc)->settings.dce; int stat_len = (lmi == LMI_CISCO) ? 6 : 3, reptype, error, no_ram, i; if (skb->len < (lmi == LMI_ANSI ? LMI_ANSI_LENGTH : @@ -645,8 +702,8 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) if (skb->data[3] != (lmi == LMI_CISCO ? NLPID_CISCO_LMI : NLPID_CCITT_ANSI_LMI)) { - printk(KERN_INFO "%s: Received non-LMI frame with LMI" - " DLCI\n", dev->name); + printk(KERN_INFO "%s: Received non-LMI frame with LMI DLCI\n", + dev->name); return 1; } @@ -706,53 +763,53 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) } i++; - hdlc->state.fr.rxseq = skb->data[i++]; /* TX sequence from peer */ + state(hdlc)->rxseq = skb->data[i++]; /* TX sequence from peer */ rxseq = skb->data[i++]; /* Should confirm our sequence */ - txseq = hdlc->state.fr.txseq; + txseq = state(hdlc)->txseq; if (dce) - hdlc->state.fr.last_poll = jiffies; + state(hdlc)->last_poll = jiffies; error = 0; - if (!hdlc->state.fr.reliable) + if (!state(hdlc)->reliable) error = 1; - if (rxseq == 0 || rxseq != txseq) { - hdlc->state.fr.n391cnt = 0; /* Ask for full report next time */ + if (rxseq == 0 || rxseq != txseq) { /* Ask for full report next time */ + state(hdlc)->n391cnt = 0; error = 1; } if (dce) { - if (hdlc->state.fr.fullrep_sent && !error) { + if (state(hdlc)->fullrep_sent && !error) { /* Stop sending full report - the last one has been confirmed by DTE */ - hdlc->state.fr.fullrep_sent = 0; - pvc = hdlc->state.fr.first_pvc; + state(hdlc)->fullrep_sent = 0; + pvc = state(hdlc)->first_pvc; while (pvc) { if (pvc->state.new) { pvc->state.new = 0; /* Tell DTE that new PVC is now active */ - hdlc->state.fr.dce_changed = 1; + state(hdlc)->dce_changed = 1; } pvc = pvc->next; } } - if (hdlc->state.fr.dce_changed) { + if (state(hdlc)->dce_changed) { reptype = LMI_FULLREP; - hdlc->state.fr.fullrep_sent = 1; - hdlc->state.fr.dce_changed = 0; + state(hdlc)->fullrep_sent = 1; + state(hdlc)->dce_changed = 0; } - hdlc->state.fr.request = 1; /* got request */ + state(hdlc)->request = 1; /* got request */ fr_lmi_send(dev, reptype == LMI_FULLREP ? 1 : 0); return 0; } /* DTE */ - hdlc->state.fr.request = 0; /* got response, no request pending */ + state(hdlc)->request = 0; /* got response, no request pending */ if (error) return 0; @@ -760,7 +817,7 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) if (reptype != LMI_FULLREP) return 0; - pvc = hdlc->state.fr.first_pvc; + pvc = state(hdlc)->first_pvc; while (pvc) { pvc->state.deleted = 1; @@ -827,7 +884,7 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) i += stat_len; } - pvc = hdlc->state.fr.first_pvc; + pvc = state(hdlc)->first_pvc; while (pvc) { if (pvc->state.deleted && pvc->state.exist) { @@ -841,17 +898,16 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) } /* Next full report after N391 polls */ - hdlc->state.fr.n391cnt = hdlc->state.fr.settings.n391; + state(hdlc)->n391cnt = state(hdlc)->settings.n391; return 0; } - static int fr_rx(struct sk_buff *skb) { - struct net_device *ndev = skb->dev; - hdlc_device *hdlc = dev_to_hdlc(ndev); + struct net_device *frad = skb->dev; + hdlc_device *hdlc = dev_to_hdlc(frad); fr_hdr *fh = (fr_hdr*)skb->data; u8 *data = skb->data; u16 dlci; @@ -864,11 +920,11 @@ static int fr_rx(struct sk_buff *skb) dlci = q922_to_dlci(skb->data); if ((dlci == LMI_CCITT_ANSI_DLCI && - (hdlc->state.fr.settings.lmi == LMI_ANSI || - hdlc->state.fr.settings.lmi == LMI_CCITT)) || + (state(hdlc)->settings.lmi == LMI_ANSI || + state(hdlc)->settings.lmi == LMI_CCITT)) || (dlci == LMI_CISCO_DLCI && - hdlc->state.fr.settings.lmi == LMI_CISCO)) { - if (fr_lmi_recv(ndev, skb)) + state(hdlc)->settings.lmi == LMI_CISCO)) { + if (fr_lmi_recv(frad, skb)) goto rx_error; dev_kfree_skb_any(skb); return NET_RX_SUCCESS; @@ -878,7 +934,7 @@ static int fr_rx(struct sk_buff *skb) if (!pvc) { #ifdef DEBUG_PKT printk(KERN_INFO "%s: No PVC for received frame's DLCI %d\n", - ndev->name, dlci); + frad->name, dlci); #endif dev_kfree_skb_any(skb); return NET_RX_DROP; @@ -886,7 +942,7 @@ static int fr_rx(struct sk_buff *skb) if (pvc->state.fecn != fh->fecn) { #ifdef DEBUG_ECN - printk(KERN_DEBUG "%s: DLCI %d FECN O%s\n", ndev->name, + printk(KERN_DEBUG "%s: DLCI %d FECN O%s\n", frad->name, dlci, fh->fecn ? "N" : "FF"); #endif pvc->state.fecn ^= 1; @@ -894,7 +950,7 @@ static int fr_rx(struct sk_buff *skb) if (pvc->state.becn != fh->becn) { #ifdef DEBUG_ECN - printk(KERN_DEBUG "%s: DLCI %d BECN O%s\n", ndev->name, + printk(KERN_DEBUG "%s: DLCI %d BECN O%s\n", frad->name, dlci, fh->becn ? "N" : "FF"); #endif pvc->state.becn ^= 1; @@ -902,7 +958,7 @@ static int fr_rx(struct sk_buff *skb) if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL) { - hdlc->stats.rx_dropped++; + dev_to_desc(frad)->stats.rx_dropped++; return NET_RX_DROP; } @@ -938,13 +994,13 @@ static int fr_rx(struct sk_buff *skb) default: printk(KERN_INFO "%s: Unsupported protocol, OUI=%x " - "PID=%x\n", ndev->name, oui, pid); + "PID=%x\n", frad->name, oui, pid); dev_kfree_skb_any(skb); return NET_RX_DROP; } } else { printk(KERN_INFO "%s: Unsupported protocol, NLPID=%x " - "length = %i\n", ndev->name, data[3], skb->len); + "length = %i\n", frad->name, data[3], skb->len); dev_kfree_skb_any(skb); return NET_RX_DROP; } @@ -964,7 +1020,7 @@ static int fr_rx(struct sk_buff *skb) } rx_error: - hdlc->stats.rx_errors++; /* Mark error */ + dev_to_desc(frad)->stats.rx_errors++; /* Mark error */ dev_kfree_skb_any(skb); return NET_RX_DROP; } @@ -977,44 +1033,42 @@ static void fr_start(struct net_device *dev) #ifdef DEBUG_LINK printk(KERN_DEBUG "fr_start\n"); #endif - if (hdlc->state.fr.settings.lmi != LMI_NONE) { - hdlc->state.fr.reliable = 0; - hdlc->state.fr.dce_changed = 1; - hdlc->state.fr.request = 0; - hdlc->state.fr.fullrep_sent = 0; - hdlc->state.fr.last_errors = 0xFFFFFFFF; - hdlc->state.fr.n391cnt = 0; - hdlc->state.fr.txseq = hdlc->state.fr.rxseq = 0; - - init_timer(&hdlc->state.fr.timer); + if (state(hdlc)->settings.lmi != LMI_NONE) { + state(hdlc)->reliable = 0; + state(hdlc)->dce_changed = 1; + state(hdlc)->request = 0; + state(hdlc)->fullrep_sent = 0; + state(hdlc)->last_errors = 0xFFFFFFFF; + state(hdlc)->n391cnt = 0; + state(hdlc)->txseq = state(hdlc)->rxseq = 0; + + init_timer(&state(hdlc)->timer); /* First poll after 1 s */ - hdlc->state.fr.timer.expires = jiffies + HZ; - hdlc->state.fr.timer.function = fr_timer; - hdlc->state.fr.timer.data = (unsigned long)dev; - add_timer(&hdlc->state.fr.timer); + state(hdlc)->timer.expires = jiffies + HZ; + state(hdlc)->timer.function = fr_timer; + state(hdlc)->timer.data = (unsigned long)dev; + add_timer(&state(hdlc)->timer); } else fr_set_link_state(1, dev); } - static void fr_stop(struct net_device *dev) { hdlc_device *hdlc = dev_to_hdlc(dev); #ifdef DEBUG_LINK printk(KERN_DEBUG "fr_stop\n"); #endif - if (hdlc->state.fr.settings.lmi != LMI_NONE) - del_timer_sync(&hdlc->state.fr.timer); + if (state(hdlc)->settings.lmi != LMI_NONE) + del_timer_sync(&state(hdlc)->timer); fr_set_link_state(0, dev); } - static void fr_close(struct net_device *dev) { hdlc_device *hdlc = dev_to_hdlc(dev); - pvc_device *pvc = hdlc->state.fr.first_pvc; + pvc_device *pvc = state(hdlc)->first_pvc; while (pvc) { /* Shutdown all PVCs for this FRAD */ if (pvc->main) @@ -1025,7 +1079,8 @@ static void fr_close(struct net_device *dev) } } -static void dlci_setup(struct net_device *dev) + +static void pvc_setup(struct net_device *dev) { dev->type = ARPHRD_DLCI; dev->flags = IFF_POINTOPOINT; @@ -1033,9 +1088,9 @@ static void dlci_setup(struct net_device *dev) dev->addr_len = 2; } -static int fr_add_pvc(struct net_device *master, unsigned int dlci, int type) +static int fr_add_pvc(struct net_device *frad, unsigned int dlci, int type) { - hdlc_device *hdlc = dev_to_hdlc(master); + hdlc_device *hdlc = dev_to_hdlc(frad); pvc_device *pvc = NULL; struct net_device *dev; int result, used; @@ -1044,9 +1099,9 @@ static int fr_add_pvc(struct net_device *master, unsigned int dlci, int type) if (type == ARPHRD_ETHER) prefix = "pvceth%d"; - if ((pvc = add_pvc(master, dlci)) == NULL) { + if ((pvc = add_pvc(frad, dlci)) == NULL) { printk(KERN_WARNING "%s: Memory squeeze on fr_add_pvc()\n", - master->name); + frad->name); return -ENOBUFS; } @@ -1060,11 +1115,11 @@ static int fr_add_pvc(struct net_device *master, unsigned int dlci, int type) "pvceth%d", ether_setup); else dev = alloc_netdev(sizeof(struct net_device_stats), - "pvc%d", dlci_setup); + "pvc%d", pvc_setup); if (!dev) { printk(KERN_WARNING "%s: Memory squeeze on fr_pvc()\n", - master->name); + frad->name); delete_unused_pvcs(hdlc); return -ENOBUFS; } @@ -1102,8 +1157,8 @@ static int fr_add_pvc(struct net_device *master, unsigned int dlci, int type) dev->destructor = free_netdev; *get_dev_p(pvc, type) = dev; if (!used) { - hdlc->state.fr.dce_changed = 1; - hdlc->state.fr.dce_pvc_count++; + state(hdlc)->dce_changed = 1; + state(hdlc)->dce_pvc_count++; } return 0; } @@ -1128,8 +1183,8 @@ static int fr_del_pvc(hdlc_device *hdlc, unsigned int dlci, int type) *get_dev_p(pvc, type) = NULL; if (!pvc_is_used(pvc)) { - hdlc->state.fr.dce_pvc_count--; - hdlc->state.fr.dce_changed = 1; + state(hdlc)->dce_pvc_count--; + state(hdlc)->dce_changed = 1; } delete_unused_pvcs(hdlc); return 0; @@ -1137,14 +1192,13 @@ static int fr_del_pvc(hdlc_device *hdlc, unsigned int dlci, int type) -static void fr_destroy(hdlc_device *hdlc) +static void fr_destroy(struct net_device *frad) { - pvc_device *pvc; - - pvc = hdlc->state.fr.first_pvc; - hdlc->state.fr.first_pvc = NULL; /* All PVCs destroyed */ - hdlc->state.fr.dce_pvc_count = 0; - hdlc->state.fr.dce_changed = 1; + hdlc_device *hdlc = dev_to_hdlc(frad); + pvc_device *pvc = state(hdlc)->first_pvc; + state(hdlc)->first_pvc = NULL; /* All PVCs destroyed */ + state(hdlc)->dce_pvc_count = 0; + state(hdlc)->dce_changed = 1; while (pvc) { pvc_device *next = pvc->next; @@ -1161,8 +1215,17 @@ static void fr_destroy(hdlc_device *hdlc) } +static struct hdlc_proto proto = { + .close = fr_close, + .start = fr_start, + .stop = fr_stop, + .detach = fr_destroy, + .ioctl = fr_ioctl, + .module = THIS_MODULE, +}; + -int hdlc_fr_ioctl(struct net_device *dev, struct ifreq *ifr) +static int fr_ioctl(struct net_device *dev, struct ifreq *ifr) { fr_proto __user *fr_s = ifr->ifr_settings.ifs_ifsu.fr; const size_t size = sizeof(fr_proto); @@ -1173,12 +1236,14 @@ int hdlc_fr_ioctl(struct net_device *dev, struct ifreq *ifr) switch (ifr->ifr_settings.type) { case IF_GET_PROTO: + if (dev_to_hdlc(dev)->proto != &proto) /* Different proto */ + return -EINVAL; ifr->ifr_settings.type = IF_PROTO_FR; if (ifr->ifr_settings.size < size) { ifr->ifr_settings.size = size; /* data size wanted */ return -ENOBUFS; } - if (copy_to_user(fr_s, &hdlc->state.fr.settings, size)) + if (copy_to_user(fr_s, &state(hdlc)->settings, size)) return -EFAULT; return 0; @@ -1213,20 +1278,16 @@ int hdlc_fr_ioctl(struct net_device *dev, struct ifreq *ifr) if (result) return result; - if (hdlc->proto.id != IF_PROTO_FR) { - hdlc_proto_detach(hdlc); - hdlc->state.fr.first_pvc = NULL; - hdlc->state.fr.dce_pvc_count = 0; + if (dev_to_hdlc(dev)->proto != &proto) { /* Different proto */ + result = attach_hdlc_protocol(dev, &proto, fr_rx, + sizeof(struct frad_state)); + if (result) + return result; + state(hdlc)->first_pvc = NULL; + state(hdlc)->dce_pvc_count = 0; } - memcpy(&hdlc->state.fr.settings, &new_settings, size); - memset(&hdlc->proto, 0, sizeof(hdlc->proto)); - - hdlc->proto.close = fr_close; - hdlc->proto.start = fr_start; - hdlc->proto.stop = fr_stop; - hdlc->proto.detach = fr_destroy; - hdlc->proto.netif_rx = fr_rx; - hdlc->proto.id = IF_PROTO_FR; + memcpy(&state(hdlc)->settings, &new_settings, size); + dev->hard_start_xmit = hdlc->xmit; dev->hard_header = NULL; dev->type = ARPHRD_FRAD; @@ -1238,6 +1299,9 @@ int hdlc_fr_ioctl(struct net_device *dev, struct ifreq *ifr) case IF_PROTO_FR_DEL_PVC: case IF_PROTO_FR_ADD_ETH_PVC: case IF_PROTO_FR_DEL_ETH_PVC: + if (dev_to_hdlc(dev)->proto != &proto) /* Different proto */ + return -EINVAL; + if(!capable(CAP_NET_ADMIN)) return -EPERM; @@ -1263,3 +1327,24 @@ int hdlc_fr_ioctl(struct net_device *dev, struct ifreq *ifr) return -EINVAL; } + + +static int __init mod_init(void) +{ + register_hdlc_protocol(&proto); + return 0; +} + + +static void __exit mod_exit(void) +{ + unregister_hdlc_protocol(&proto); +} + + +module_init(mod_init); +module_exit(mod_exit); + +MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>"); +MODULE_DESCRIPTION("Frame-Relay protocol support for generic HDLC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/wan/hdlc_ppp.c b/drivers/net/wan/hdlc_ppp.c index fbaab5bf71e..e9f717070fd 100644 --- a/drivers/net/wan/hdlc_ppp.c +++ b/drivers/net/wan/hdlc_ppp.c @@ -2,7 +2,7 @@ * Generic HDLC support routines for Linux * Point-to-point protocol support * - * Copyright (C) 1999 - 2003 Krzysztof Halasa <khc@pm.waw.pl> + * Copyright (C) 1999 - 2006 Krzysztof Halasa <khc@pm.waw.pl> * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License @@ -22,6 +22,21 @@ #include <linux/lapb.h> #include <linux/rtnetlink.h> #include <linux/hdlc.h> +#include <net/syncppp.h> + +struct ppp_state { + struct ppp_device pppdev; + struct ppp_device *syncppp_ptr; + int (*old_change_mtu)(struct net_device *dev, int new_mtu); +}; + +static int ppp_ioctl(struct net_device *dev, struct ifreq *ifr); + + +static inline struct ppp_state* state(hdlc_device *hdlc) +{ + return(struct ppp_state *)(hdlc->state); +} static int ppp_open(struct net_device *dev) @@ -30,16 +45,16 @@ static int ppp_open(struct net_device *dev) void *old_ioctl; int result; - dev->priv = &hdlc->state.ppp.syncppp_ptr; - hdlc->state.ppp.syncppp_ptr = &hdlc->state.ppp.pppdev; - hdlc->state.ppp.pppdev.dev = dev; + dev->priv = &state(hdlc)->syncppp_ptr; + state(hdlc)->syncppp_ptr = &state(hdlc)->pppdev; + state(hdlc)->pppdev.dev = dev; old_ioctl = dev->do_ioctl; - hdlc->state.ppp.old_change_mtu = dev->change_mtu; - sppp_attach(&hdlc->state.ppp.pppdev); + state(hdlc)->old_change_mtu = dev->change_mtu; + sppp_attach(&state(hdlc)->pppdev); /* sppp_attach nukes them. We don't need syncppp's ioctl */ dev->do_ioctl = old_ioctl; - hdlc->state.ppp.pppdev.sppp.pp_flags &= ~PP_CISCO; + state(hdlc)->pppdev.sppp.pp_flags &= ~PP_CISCO; dev->type = ARPHRD_PPP; result = sppp_open(dev); if (result) { @@ -59,7 +74,7 @@ static void ppp_close(struct net_device *dev) sppp_close(dev); sppp_detach(dev); dev->rebuild_header = NULL; - dev->change_mtu = hdlc->state.ppp.old_change_mtu; + dev->change_mtu = state(hdlc)->old_change_mtu; dev->mtu = HDLC_MAX_MTU; dev->hard_header_len = 16; } @@ -73,13 +88,24 @@ static __be16 ppp_type_trans(struct sk_buff *skb, struct net_device *dev) -int hdlc_ppp_ioctl(struct net_device *dev, struct ifreq *ifr) +static struct hdlc_proto proto = { + .open = ppp_open, + .close = ppp_close, + .type_trans = ppp_type_trans, + .ioctl = ppp_ioctl, + .module = THIS_MODULE, +}; + + +static int ppp_ioctl(struct net_device *dev, struct ifreq *ifr) { hdlc_device *hdlc = dev_to_hdlc(dev); int result; switch (ifr->ifr_settings.type) { case IF_GET_PROTO: + if (dev_to_hdlc(dev)->proto != &proto) + return -EINVAL; ifr->ifr_settings.type = IF_PROTO_PPP; return 0; /* return protocol only, no settable parameters */ @@ -96,13 +122,10 @@ int hdlc_ppp_ioctl(struct net_device *dev, struct ifreq *ifr) if (result) return result; - hdlc_proto_detach(hdlc); - memset(&hdlc->proto, 0, sizeof(hdlc->proto)); - - hdlc->proto.open = ppp_open; - hdlc->proto.close = ppp_close; - hdlc->proto.type_trans = ppp_type_trans; - hdlc->proto.id = IF_PROTO_PPP; + result = attach_hdlc_protocol(dev, &proto, NULL, + sizeof(struct ppp_state)); + if (result) + return result; dev->hard_start_xmit = hdlc->xmit; dev->hard_header = NULL; dev->type = ARPHRD_PPP; @@ -113,3 +136,25 @@ int hdlc_ppp_ioctl(struct net_device *dev, struct ifreq *ifr) return -EINVAL; } + + +static int __init mod_init(void) +{ + register_hdlc_protocol(&proto); + return 0; +} + + + +static void __exit mod_exit(void) +{ + unregister_hdlc_protocol(&proto); +} + + +module_init(mod_init); +module_exit(mod_exit); + +MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>"); +MODULE_DESCRIPTION("PPP protocol support for generic HDLC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/wan/hdlc_raw.c b/drivers/net/wan/hdlc_raw.c index f15aa6ba77f..fe3cae5c6b9 100644 --- a/drivers/net/wan/hdlc_raw.c +++ b/drivers/net/wan/hdlc_raw.c @@ -2,7 +2,7 @@ * Generic HDLC support routines for Linux * HDLC support * - * Copyright (C) 1999 - 2003 Krzysztof Halasa <khc@pm.waw.pl> + * Copyright (C) 1999 - 2006 Krzysztof Halasa <khc@pm.waw.pl> * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License @@ -24,6 +24,8 @@ #include <linux/hdlc.h> +static int raw_ioctl(struct net_device *dev, struct ifreq *ifr); + static __be16 raw_type_trans(struct sk_buff *skb, struct net_device *dev) { return __constant_htons(ETH_P_IP); @@ -31,7 +33,14 @@ static __be16 raw_type_trans(struct sk_buff *skb, struct net_device *dev) -int hdlc_raw_ioctl(struct net_device *dev, struct ifreq *ifr) +static struct hdlc_proto proto = { + .type_trans = raw_type_trans, + .ioctl = raw_ioctl, + .module = THIS_MODULE, +}; + + +static int raw_ioctl(struct net_device *dev, struct ifreq *ifr) { raw_hdlc_proto __user *raw_s = ifr->ifr_settings.ifs_ifsu.raw_hdlc; const size_t size = sizeof(raw_hdlc_proto); @@ -41,12 +50,14 @@ int hdlc_raw_ioctl(struct net_device *dev, struct ifreq *ifr) switch (ifr->ifr_settings.type) { case IF_GET_PROTO: + if (dev_to_hdlc(dev)->proto != &proto) + return -EINVAL; ifr->ifr_settings.type = IF_PROTO_HDLC; if (ifr->ifr_settings.size < size) { ifr->ifr_settings.size = size; /* data size wanted */ return -ENOBUFS; } - if (copy_to_user(raw_s, &hdlc->state.raw_hdlc.settings, size)) + if (copy_to_user(raw_s, hdlc->state, size)) return -EFAULT; return 0; @@ -71,12 +82,11 @@ int hdlc_raw_ioctl(struct net_device *dev, struct ifreq *ifr) if (result) return result; - hdlc_proto_detach(hdlc); - memcpy(&hdlc->state.raw_hdlc.settings, &new_settings, size); - memset(&hdlc->proto, 0, sizeof(hdlc->proto)); - - hdlc->proto.type_trans = raw_type_trans; - hdlc->proto.id = IF_PROTO_HDLC; + result = attach_hdlc_protocol(dev, &proto, NULL, + sizeof(raw_hdlc_proto)); + if (result) + return result; + memcpy(hdlc->state, &new_settings, size); dev->hard_start_xmit = hdlc->xmit; dev->hard_header = NULL; dev->type = ARPHRD_RAWHDLC; @@ -88,3 +98,25 @@ int hdlc_raw_ioctl(struct net_device *dev, struct ifreq *ifr) return -EINVAL; } + + +static int __init mod_init(void) +{ + register_hdlc_protocol(&proto); + return 0; +} + + + +static void __exit mod_exit(void) +{ + unregister_hdlc_protocol(&proto); +} + + +module_init(mod_init); +module_exit(mod_exit); + +MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>"); +MODULE_DESCRIPTION("Raw HDLC protocol support for generic HDLC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/wan/hdlc_raw_eth.c b/drivers/net/wan/hdlc_raw_eth.c index d1884987f94..1a69a9aaa9b 100644 --- a/drivers/net/wan/hdlc_raw_eth.c +++ b/drivers/net/wan/hdlc_raw_eth.c @@ -2,7 +2,7 @@ * Generic HDLC support routines for Linux * HDLC Ethernet emulation support * - * Copyright (C) 2002-2003 Krzysztof Halasa <khc@pm.waw.pl> + * Copyright (C) 2002-2006 Krzysztof Halasa <khc@pm.waw.pl> * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License @@ -25,6 +25,7 @@ #include <linux/etherdevice.h> #include <linux/hdlc.h> +static int raw_eth_ioctl(struct net_device *dev, struct ifreq *ifr); static int eth_tx(struct sk_buff *skb, struct net_device *dev) { @@ -44,7 +45,14 @@ static int eth_tx(struct sk_buff *skb, struct net_device *dev) } -int hdlc_raw_eth_ioctl(struct net_device *dev, struct ifreq *ifr) +static struct hdlc_proto proto = { + .type_trans = eth_type_trans, + .ioctl = raw_eth_ioctl, + .module = THIS_MODULE, +}; + + +static int raw_eth_ioctl(struct net_device *dev, struct ifreq *ifr) { raw_hdlc_proto __user *raw_s = ifr->ifr_settings.ifs_ifsu.raw_hdlc; const size_t size = sizeof(raw_hdlc_proto); @@ -56,12 +64,14 @@ int hdlc_raw_eth_ioctl(struct net_device *dev, struct ifreq *ifr) switch (ifr->ifr_settings.type) { case IF_GET_PROTO: + if (dev_to_hdlc(dev)->proto != &proto) + return -EINVAL; ifr->ifr_settings.type = IF_PROTO_HDLC_ETH; if (ifr->ifr_settings.size < size) { ifr->ifr_settings.size = size; /* data size wanted */ return -ENOBUFS; } - if (copy_to_user(raw_s, &hdlc->state.raw_hdlc.settings, size)) + if (copy_to_user(raw_s, hdlc->state, size)) return -EFAULT; return 0; @@ -86,12 +96,11 @@ int hdlc_raw_eth_ioctl(struct net_device *dev, struct ifreq *ifr) if (result) return result; - hdlc_proto_detach(hdlc); - memcpy(&hdlc->state.raw_hdlc.settings, &new_settings, size); - memset(&hdlc->proto, 0, sizeof(hdlc->proto)); - - hdlc->proto.type_trans = eth_type_trans; - hdlc->proto.id = IF_PROTO_HDLC_ETH; + result = attach_hdlc_protocol(dev, &proto, NULL, + sizeof(raw_hdlc_proto)); + if (result) + return result; + memcpy(hdlc->state, &new_settings, size); dev->hard_start_xmit = eth_tx; old_ch_mtu = dev->change_mtu; old_qlen = dev->tx_queue_len; @@ -106,3 +115,25 @@ int hdlc_raw_eth_ioctl(struct net_device *dev, struct ifreq *ifr) return -EINVAL; } + + +static int __init mod_init(void) +{ + register_hdlc_protocol(&proto); + return 0; +} + + + +static void __exit mod_exit(void) +{ + unregister_hdlc_protocol(&proto); +} + + +module_init(mod_init); +module_exit(mod_exit); + +MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>"); +MODULE_DESCRIPTION("Ethernet encapsulation support for generic HDLC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/wan/hdlc_x25.c b/drivers/net/wan/hdlc_x25.c index a867fb411f8..e4bb9f8ad43 100644 --- a/drivers/net/wan/hdlc_x25.c +++ b/drivers/net/wan/hdlc_x25.c @@ -2,7 +2,7 @@ * Generic HDLC support routines for Linux * X.25 support * - * Copyright (C) 1999 - 2003 Krzysztof Halasa <khc@pm.waw.pl> + * Copyright (C) 1999 - 2006 Krzysztof Halasa <khc@pm.waw.pl> * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License @@ -25,6 +25,8 @@ #include <net/x25device.h> +static int x25_ioctl(struct net_device *dev, struct ifreq *ifr); + /* These functions are callbacks called by LAPB layer */ static void x25_connect_disconnect(struct net_device *dev, int reason, int code) @@ -162,30 +164,39 @@ static void x25_close(struct net_device *dev) static int x25_rx(struct sk_buff *skb) { - hdlc_device *hdlc = dev_to_hdlc(skb->dev); + struct hdlc_device_desc *desc = dev_to_desc(skb->dev); if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL) { - hdlc->stats.rx_dropped++; + desc->stats.rx_dropped++; return NET_RX_DROP; } if (lapb_data_received(skb->dev, skb) == LAPB_OK) return NET_RX_SUCCESS; - hdlc->stats.rx_errors++; + desc->stats.rx_errors++; dev_kfree_skb_any(skb); return NET_RX_DROP; } +static struct hdlc_proto proto = { + .open = x25_open, + .close = x25_close, + .ioctl = x25_ioctl, + .module = THIS_MODULE, +}; + -int hdlc_x25_ioctl(struct net_device *dev, struct ifreq *ifr) +static int x25_ioctl(struct net_device *dev, struct ifreq *ifr) { hdlc_device *hdlc = dev_to_hdlc(dev); int result; switch (ifr->ifr_settings.type) { case IF_GET_PROTO: + if (dev_to_hdlc(dev)->proto != &proto) + return -EINVAL; ifr->ifr_settings.type = IF_PROTO_X25; return 0; /* return protocol only, no settable parameters */ @@ -200,14 +211,9 @@ int hdlc_x25_ioctl(struct net_device *dev, struct ifreq *ifr) if (result) return result; - hdlc_proto_detach(hdlc); - memset(&hdlc->proto, 0, sizeof(hdlc->proto)); - - hdlc->proto.open = x25_open; - hdlc->proto.close = x25_close; - hdlc->proto.netif_rx = x25_rx; - hdlc->proto.type_trans = NULL; - hdlc->proto.id = IF_PROTO_X25; + if ((result = attach_hdlc_protocol(dev, &proto, + x25_rx, 0)) != 0) + return result; dev->hard_start_xmit = x25_xmit; dev->hard_header = NULL; dev->type = ARPHRD_X25; @@ -218,3 +224,25 @@ int hdlc_x25_ioctl(struct net_device *dev, struct ifreq *ifr) return -EINVAL; } + + +static int __init mod_init(void) +{ + register_hdlc_protocol(&proto); + return 0; +} + + + +static void __exit mod_exit(void) +{ + unregister_hdlc_protocol(&proto); +} + + +module_init(mod_init); +module_exit(mod_exit); + +MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>"); +MODULE_DESCRIPTION("X.25 protocol support for generic HDLC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/wan/pc300.h b/drivers/net/wan/pc300.h index 2024b26b99e..63e9fcf31fb 100644 --- a/drivers/net/wan/pc300.h +++ b/drivers/net/wan/pc300.h @@ -100,6 +100,7 @@ #define _PC300_H #include <linux/hdlc.h> +#include <net/syncppp.h> #include "hd64572.h" #include "pc300-falc-lh.h" diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c index 56e69403d17..8d9b959bf15 100644 --- a/drivers/net/wan/pc300_drv.c +++ b/drivers/net/wan/pc300_drv.c @@ -2016,7 +2016,6 @@ static void sca_intr(pc300_t * card) pc300ch_t *chan = &card->chan[ch]; pc300dev_t *d = &chan->d; struct net_device *dev = d->dev; - hdlc_device *hdlc = dev_to_hdlc(dev); spin_lock(&card->card_lock); @@ -2049,8 +2048,8 @@ static void sca_intr(pc300_t * card) } cpc_net_rx(dev); /* Discard invalid frames */ - hdlc->stats.rx_errors++; - hdlc->stats.rx_over_errors++; + hdlc_stats(dev)->rx_errors++; + hdlc_stats(dev)->rx_over_errors++; chan->rx_first_bd = 0; chan->rx_last_bd = N_DMA_RX_BUF - 1; rx_dma_start(card, ch); @@ -2116,8 +2115,8 @@ static void sca_intr(pc300_t * card) card->hw.cpld_reg2) & ~ (CPLD_REG2_FALC_LED1 << (2 * ch))); } - hdlc->stats.tx_errors++; - hdlc->stats.tx_fifo_errors++; + hdlc_stats(dev)->tx_errors++; + hdlc_stats(dev)->tx_fifo_errors++; sca_tx_intr(d); } } @@ -2534,7 +2533,6 @@ static int cpc_change_mtu(struct net_device *dev, int new_mtu) static int cpc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) { - hdlc_device *hdlc = dev_to_hdlc(dev); pc300dev_t *d = (pc300dev_t *) dev->priv; pc300ch_t *chan = (pc300ch_t *) d->chan; pc300_t *card = (pc300_t *) chan->card; @@ -2552,10 +2550,10 @@ static int cpc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) case SIOCGPC300CONF: #ifdef CONFIG_PC300_MLPPP if (conf->proto != PC300_PROTO_MLPPP) { - conf->proto = hdlc->proto.id; + conf->proto = /* FIXME hdlc->proto.id */ 0; } #else - conf->proto = hdlc->proto.id; + conf->proto = /* FIXME hdlc->proto.id */ 0; #endif memcpy(&conf_aux.conf, conf, sizeof(pc300chconf_t)); memcpy(&conf_aux.hw, &card->hw, sizeof(pc300hw_t)); @@ -2588,12 +2586,12 @@ static int cpc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) } } else { memcpy(conf, &conf_aux.conf, sizeof(pc300chconf_t)); - hdlc->proto.id = conf->proto; + /* FIXME hdlc->proto.id = conf->proto; */ } } #else memcpy(conf, &conf_aux.conf, sizeof(pc300chconf_t)); - hdlc->proto.id = conf->proto; + /* FIXME hdlc->proto.id = conf->proto; */ #endif return 0; case SIOCGPC300STATUS: @@ -2606,7 +2604,7 @@ static int cpc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) case SIOCGPC300UTILSTATS: { if (!arg) { /* clear statistics */ - memset(&hdlc->stats, 0, sizeof(struct net_device_stats)); + memset(hdlc_stats(dev), 0, sizeof(struct net_device_stats)); if (card->hw.type == PC300_TE) { memset(&chan->falc, 0, sizeof(falc_t)); } @@ -2617,7 +2615,7 @@ static int cpc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) pc300stats.hw_type = card->hw.type; pc300stats.line_on = card->chan[ch].d.line_on; pc300stats.line_off = card->chan[ch].d.line_off; - memcpy(&pc300stats.gen_stats, &hdlc->stats, + memcpy(&pc300stats.gen_stats, hdlc_stats(dev), sizeof(struct net_device_stats)); if (card->hw.type == PC300_TE) memcpy(&pc300stats.te_stats,&chan->falc,sizeof(falc_t)); @@ -3147,7 +3145,6 @@ static void cpc_closech(pc300dev_t * d) int cpc_open(struct net_device *dev) { - hdlc_device *hdlc = dev_to_hdlc(dev); pc300dev_t *d = (pc300dev_t *) dev->priv; struct ifreq ifr; int result; @@ -3156,12 +3153,14 @@ int cpc_open(struct net_device *dev) printk("pc300: cpc_open"); #endif +#ifdef FIXME if (hdlc->proto.id == IF_PROTO_PPP) { d->if_ptr = &hdlc->state.ppp.pppdev; } +#endif result = hdlc_open(dev); - if (hdlc->proto.id == IF_PROTO_PPP) { + if (/* FIXME hdlc->proto.id == IF_PROTO_PPP*/ 0) { dev->priv = d; } if (result) { @@ -3176,7 +3175,6 @@ int cpc_open(struct net_device *dev) static int cpc_close(struct net_device *dev) { - hdlc_device *hdlc = dev_to_hdlc(dev); pc300dev_t *d = (pc300dev_t *) dev->priv; pc300ch_t *chan = (pc300ch_t *) d->chan; pc300_t *card = (pc300_t *) chan->card; @@ -3193,7 +3191,7 @@ static int cpc_close(struct net_device *dev) CPC_UNLOCK(card, flags); hdlc_close(dev); - if (hdlc->proto.id == IF_PROTO_PPP) { + if (/* FIXME hdlc->proto.id == IF_PROTO_PPP*/ 0) { d->if_ptr = NULL; } #ifdef CONFIG_PC300_MLPPP diff --git a/drivers/net/wan/syncppp.c b/drivers/net/wan/syncppp.c index c13b459a013..218f7b574ab 100644 --- a/drivers/net/wan/syncppp.c +++ b/drivers/net/wan/syncppp.c @@ -469,7 +469,7 @@ static void sppp_lcp_input (struct sppp *sp, struct sk_buff *skb) struct net_device *dev = sp->pp_if; int len = skb->len; u8 *p, opt[6]; - u32 rmagic; + u32 rmagic = 0; if (!pskb_may_pull(skb, sizeof(struct lcp_header))) { if (sp->pp_flags & PP_DEBUG) @@ -763,7 +763,7 @@ static void sppp_cisco_input (struct sppp *sp, struct sk_buff *skb) { struct in_device *in_dev; struct in_ifaddr *ifa; - u32 addr = 0, mask = ~0; /* FIXME: is the mask correct? */ + __be32 addr = 0, mask = ~0; /* FIXME: is the mask correct? */ #ifdef CONFIG_INET rcu_read_lock(); if ((in_dev = __in_dev_get_rcu(dev)) != NULL) diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index bff04cba3fe..39d09345027 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -5659,25 +5659,40 @@ static int airo_pci_resume(struct pci_dev *pdev) static int __init airo_init_module( void ) { - int i, have_isa_dev = 0; + int i; +#if 0 + int have_isa_dev = 0; +#endif airo_entry = create_proc_entry("aironet", S_IFDIR | airo_perm, proc_root_driver); - airo_entry->uid = proc_uid; - airo_entry->gid = proc_gid; + + if (airo_entry) { + airo_entry->uid = proc_uid; + airo_entry->gid = proc_gid; + } for( i = 0; i < 4 && io[i] && irq[i]; i++ ) { airo_print_info("", "Trying to configure ISA adapter at irq=%d " "io=0x%x", irq[i], io[i] ); if (init_airo_card( irq[i], io[i], 0, NULL )) +#if 0 have_isa_dev = 1; +#else + /* do nothing */ ; +#endif } #ifdef CONFIG_PCI airo_print_info("", "Probing for PCI adapters"); - pci_register_driver(&airo_driver); + i = pci_register_driver(&airo_driver); airo_print_info("", "Finished probing for PCI adapters"); + + if (i) { + remove_proc_entry("aironet", proc_root_driver); + return i; + } #endif /* Always exit with success, as we are a library module @@ -5868,7 +5883,7 @@ static int airo_set_essid(struct net_device *dev, int index = (dwrq->flags & IW_ENCODE_INDEX) - 1; /* Check the size of the string */ - if(dwrq->length > IW_ESSID_MAX_SIZE+1) { + if(dwrq->length > IW_ESSID_MAX_SIZE) { return -E2BIG ; } /* Check if index is valid */ @@ -5880,7 +5895,7 @@ static int airo_set_essid(struct net_device *dev, memset(SSID_rid.ssids[index].ssid, 0, sizeof(SSID_rid.ssids[index].ssid)); memcpy(SSID_rid.ssids[index].ssid, extra, dwrq->length); - SSID_rid.ssids[index].len = dwrq->length - 1; + SSID_rid.ssids[index].len = dwrq->length; } SSID_rid.len = sizeof(SSID_rid); /* Write it to the card */ @@ -5990,7 +6005,7 @@ static int airo_set_nick(struct net_device *dev, struct airo_info *local = dev->priv; /* Check the size of the string */ - if(dwrq->length > 16 + 1) { + if(dwrq->length > 16) { return -E2BIG; } readConfigRid(local, 1); @@ -6015,7 +6030,7 @@ static int airo_get_nick(struct net_device *dev, readConfigRid(local, 1); strncpy(extra, local->config.nodeName, 16); extra[16] = '\0'; - dwrq->length = strlen(extra) + 1; + dwrq->length = strlen(extra); return 0; } @@ -6767,9 +6782,9 @@ static int airo_set_retry(struct net_device *dev, } readConfigRid(local, 1); if(vwrq->flags & IW_RETRY_LIMIT) { - if(vwrq->flags & IW_RETRY_MAX) + if(vwrq->flags & IW_RETRY_LONG) local->config.longRetryLimit = vwrq->value; - else if (vwrq->flags & IW_RETRY_MIN) + else if (vwrq->flags & IW_RETRY_SHORT) local->config.shortRetryLimit = vwrq->value; else { /* No modifier : set both */ @@ -6805,14 +6820,14 @@ static int airo_get_retry(struct net_device *dev, if((vwrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) { vwrq->flags = IW_RETRY_LIFETIME; vwrq->value = (int)local->config.txLifetime * 1024; - } else if((vwrq->flags & IW_RETRY_MAX)) { - vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX; + } else if((vwrq->flags & IW_RETRY_LONG)) { + vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_LONG; vwrq->value = (int)local->config.longRetryLimit; } else { vwrq->flags = IW_RETRY_LIMIT; vwrq->value = (int)local->config.shortRetryLimit; if((int)local->config.shortRetryLimit != (int)local->config.longRetryLimit) - vwrq->flags |= IW_RETRY_MIN; + vwrq->flags |= IW_RETRY_SHORT; } return 0; @@ -6990,6 +7005,7 @@ static int airo_set_power(struct net_device *dev, local->config.rmode |= RXMODE_BC_MC_ADDR; set_bit (FLAG_COMMIT, &local->flags); case IW_POWER_ON: + /* This is broken, fixme ;-) */ break; default: return -EINVAL; diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index 995c7bea589..0fc267d626d 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -1656,13 +1656,13 @@ static int atmel_set_essid(struct net_device *dev, priv->connect_to_any_BSS = 0; /* Check the size of the string */ - if (dwrq->length > MAX_SSID_LENGTH + 1) + if (dwrq->length > MAX_SSID_LENGTH) return -E2BIG; if (index != 0) return -EINVAL; - memcpy(priv->new_SSID, extra, dwrq->length - 1); - priv->new_SSID_size = dwrq->length - 1; + memcpy(priv->new_SSID, extra, dwrq->length); + priv->new_SSID_size = dwrq->length; } return -EINPROGRESS; @@ -2120,9 +2120,9 @@ static int atmel_set_retry(struct net_device *dev, struct atmel_private *priv = netdev_priv(dev); if (!vwrq->disabled && (vwrq->flags & IW_RETRY_LIMIT)) { - if (vwrq->flags & IW_RETRY_MAX) + if (vwrq->flags & IW_RETRY_LONG) priv->long_retry = vwrq->value; - else if (vwrq->flags & IW_RETRY_MIN) + else if (vwrq->flags & IW_RETRY_SHORT) priv->short_retry = vwrq->value; else { /* No modifier : set both */ @@ -2144,15 +2144,15 @@ static int atmel_get_retry(struct net_device *dev, vwrq->disabled = 0; /* Can't be disabled */ - /* Note : by default, display the min retry number */ - if (vwrq->flags & IW_RETRY_MAX) { - vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX; + /* Note : by default, display the short retry number */ + if (vwrq->flags & IW_RETRY_LONG) { + vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_LONG; vwrq->value = priv->long_retry; } else { vwrq->flags = IW_RETRY_LIMIT; vwrq->value = priv->short_retry; if (priv->long_retry != priv->short_retry) - vwrq->flags |= IW_RETRY_MIN; + vwrq->flags |= IW_RETRY_SHORT; } return 0; diff --git a/drivers/net/wireless/bcm43xx/bcm43xx.h b/drivers/net/wireless/bcm43xx/bcm43xx.h index 6d4ea36bc56..d6a8bf09878 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx.h +++ b/drivers/net/wireless/bcm43xx/bcm43xx.h @@ -666,7 +666,6 @@ struct bcm43xx_noise_calculation { }; struct bcm43xx_stats { - u8 link_quality; u8 noise; struct iw_statistics wstats; /* Store the last TX/RX times here for updating the leds. */ diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c b/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c index 923275ea078..b9df06a06ea 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c @@ -54,7 +54,7 @@ static ssize_t write_file_dummy(struct file *file, const char __user *buf, static int open_file_generic(struct inode *inode, struct file *file) { - file->private_data = inode->u.generic_ip; + file->private_data = inode->i_private; return 0; } diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c index cb9a3ae8463..eb65db7393b 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c @@ -2405,9 +2405,10 @@ static int bcm43xx_chip_init(struct bcm43xx_private *bcm) BCM43xx_UCODE_TIME) & 0x1f); if ( value16 > 0x128 ) { - dprintk(KERN_ERR PFX - "Firmware: no support for microcode rev > 0x128\n"); - err = -1; + printk(KERN_ERR PFX + "Firmware: no support for microcode extracted " + "from version 4.x binary drivers.\n"); + err = -EOPNOTSUPP; goto err_release_fw; } @@ -3169,8 +3170,7 @@ static void bcm43xx_periodic_work_handler(void *d) * be preemtible. */ mutex_lock(&bcm->mutex); - netif_stop_queue(bcm->net_dev); - synchronize_net(); + netif_tx_disable(bcm->net_dev); spin_lock_irqsave(&bcm->irq_lock, flags); bcm43xx_mac_suspend(bcm); if (bcm43xx_using_pio(bcm)) diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_phy.c b/drivers/net/wireless/bcm43xx/bcm43xx_phy.c index eafd0f66268..52ce2a9334f 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_phy.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_phy.c @@ -361,7 +361,7 @@ static void bcm43xx_phy_setupg(struct bcm43xx_private *bcm) if (phy->rev <= 2) for (i = 0; i < BCM43xx_ILT_NOISESCALEG_SIZE; i++) bcm43xx_ilt_write(bcm, 0x1400 + i, bcm43xx_ilt_noisescaleg1[i]); - else if ((phy->rev == 7) && (bcm43xx_phy_read(bcm, 0x0449) & 0x0200)) + else if ((phy->rev >= 7) && (bcm43xx_phy_read(bcm, 0x0449) & 0x0200)) for (i = 0; i < BCM43xx_ILT_NOISESCALEG_SIZE; i++) bcm43xx_ilt_write(bcm, 0x1400 + i, bcm43xx_ilt_noisescaleg3[i]); else @@ -371,7 +371,7 @@ static void bcm43xx_phy_setupg(struct bcm43xx_private *bcm) if (phy->rev == 2) for (i = 0; i < BCM43xx_ILT_SIGMASQR_SIZE; i++) bcm43xx_ilt_write(bcm, 0x5000 + i, bcm43xx_ilt_sigmasqr1[i]); - else if ((phy->rev > 2) && (phy->rev <= 7)) + else if ((phy->rev > 2) && (phy->rev <= 8)) for (i = 0; i < BCM43xx_ILT_SIGMASQR_SIZE; i++) bcm43xx_ilt_write(bcm, 0x5000 + i, bcm43xx_ilt_sigmasqr2[i]); @@ -1197,7 +1197,7 @@ static void bcm43xx_phy_initg(struct bcm43xx_private *bcm) if (phy->rev == 1) bcm43xx_phy_initb5(bcm); - else if (phy->rev >= 2 && phy->rev <= 7) + else bcm43xx_phy_initb6(bcm); if (phy->rev >= 2 || phy->connected) bcm43xx_phy_inita(bcm); @@ -1241,23 +1241,22 @@ static void bcm43xx_phy_initg(struct bcm43xx_private *bcm) bcm43xx_phy_lo_g_measure(bcm); } else { if (radio->version == 0x2050 && radio->revision == 8) { - //FIXME + bcm43xx_radio_write16(bcm, 0x0052, + (radio->txctl1 << 4) | radio->txctl2); } else { bcm43xx_radio_write16(bcm, 0x0052, (bcm43xx_radio_read16(bcm, 0x0052) & 0xFFF0) | radio->txctl1); } if (phy->rev >= 6) { - /* bcm43xx_phy_write(bcm, 0x0036, (bcm43xx_phy_read(bcm, 0x0036) - & 0xF000) | (FIXME << 12)); - */ + & 0xF000) | (radio->txctl2 << 12)); } if (bcm->sprom.boardflags & BCM43xx_BFL_PACTRL) bcm43xx_phy_write(bcm, 0x002E, 0x8075); else - bcm43xx_phy_write(bcm, 0x003E, 0x807F); + bcm43xx_phy_write(bcm, 0x002E, 0x807F); if (phy->rev < 2) bcm43xx_phy_write(bcm, 0x002F, 0x0101); else diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_wx.c b/drivers/net/wireless/bcm43xx/bcm43xx_wx.c index 888077fc14c..9b7b15cf656 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_wx.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_wx.c @@ -334,7 +334,7 @@ static int bcm43xx_wx_get_nick(struct net_device *net_dev, size_t len; mutex_lock(&bcm->mutex); - len = strlen(bcm->nick) + 1; + len = strlen(bcm->nick); memcpy(extra, bcm->nick, len); data->data.length = (__u16)len; data->data.flags = 1; diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_xmit.c b/drivers/net/wireless/bcm43xx/bcm43xx_xmit.c index c0efbfe605a..0159e4e9320 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_xmit.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_xmit.c @@ -496,15 +496,14 @@ int bcm43xx_rx(struct bcm43xx_private *bcm, stats.signal = bcm43xx_rssi_postprocess(bcm, rxhdr->rssi, is_ofdm, !!(rxflags1 & BCM43xx_RXHDR_FLAGS1_2053RSSIADJ), !!(rxflags3 & BCM43xx_RXHDR_FLAGS3_2050RSSIADJ)); -//TODO stats.noise = + stats.noise = bcm->stats.noise; if (is_ofdm) stats.rate = bcm43xx_plcp_get_bitrate_ofdm(plcp); else stats.rate = bcm43xx_plcp_get_bitrate_cck(plcp); stats.received_channel = radio->channel; -//TODO stats.control = stats.mask = IEEE80211_STATMASK_SIGNAL | -//TODO IEEE80211_STATMASK_NOISE | + IEEE80211_STATMASK_NOISE | IEEE80211_STATMASK_RATE | IEEE80211_STATMASK_RSSI; if (phy->type == BCM43xx_PHYTYPE_A) diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c index 7a4978516ea..d061fb3443f 100644 --- a/drivers/net/wireless/hostap/hostap_ioctl.c +++ b/drivers/net/wireless/hostap/hostap_ioctl.c @@ -1412,9 +1412,9 @@ static int prism2_ioctl_siwretry(struct net_device *dev, /* what could be done, if firmware would support this.. */ if (rrq->flags & IW_RETRY_LIMIT) { - if (rrq->flags & IW_RETRY_MAX) + if (rrq->flags & IW_RETRY_LONG) HFA384X_RID_LONGRETRYLIMIT = rrq->value; - else if (rrq->flags & IW_RETRY_MIN) + else if (rrq->flags & IW_RETRY_SHORT) HFA384X_RID_SHORTRETRYLIMIT = rrq->value; else { HFA384X_RID_LONGRETRYLIMIT = rrq->value; @@ -1468,14 +1468,14 @@ static int prism2_ioctl_giwretry(struct net_device *dev, rrq->value = le16_to_cpu(altretry); else rrq->value = local->manual_retry_count; - } else if ((rrq->flags & IW_RETRY_MAX)) { - rrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX; + } else if ((rrq->flags & IW_RETRY_LONG)) { + rrq->flags = IW_RETRY_LIMIT | IW_RETRY_LONG; rrq->value = longretry; } else { rrq->flags = IW_RETRY_LIMIT; rrq->value = shortretry; if (shortretry != longretry) - rrq->flags |= IW_RETRY_MIN; + rrq->flags |= IW_RETRY_SHORT; } } return 0; diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c index b4d81a04c89..599e2fe7618 100644 --- a/drivers/net/wireless/ipw2100.c +++ b/drivers/net/wireless/ipw2100.c @@ -150,7 +150,6 @@ that only one external action is invoked at a time. #include <linux/skbuff.h> #include <asm/uaccess.h> #include <asm/io.h> -#define __KERNEL_SYSCALLS__ #include <linux/fs.h> #include <linux/mm.h> #include <linux/slab.h> @@ -163,6 +162,7 @@ that only one external action is invoked at a time. #include <linux/firmware.h> #include <linux/acpi.h> #include <linux/ctype.h> +#include <linux/latency.h> #include "ipw2100.h" @@ -1697,6 +1697,11 @@ static int ipw2100_up(struct ipw2100_priv *priv, int deferred) return 0; } + /* the ipw2100 hardware really doesn't want power management delays + * longer than 175usec + */ + modify_acceptable_latency("ipw2100", 175); + /* If the interrupt is enabled, turn it off... */ spin_lock_irqsave(&priv->low_lock, flags); ipw2100_disable_interrupts(priv); @@ -1849,6 +1854,8 @@ static void ipw2100_down(struct ipw2100_priv *priv) ipw2100_disable_interrupts(priv); spin_unlock_irqrestore(&priv->low_lock, flags); + modify_acceptable_latency("ipw2100", INFINITE_LATENCY); + #ifdef ACPI_CSTATE_LIMIT_DEFINED if (priv->config & CFG_C3_DISABLED) { IPW_DEBUG_INFO(": Resetting C3 transitions.\n"); @@ -6267,7 +6274,9 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev, IPW_DEBUG_INFO("%s: Bound to %s\n", dev->name, pci_name(pci_dev)); /* perform this after register_netdev so that dev->name is set */ - sysfs_create_group(&pci_dev->dev.kobj, &ipw2100_attribute_group); + err = sysfs_create_group(&pci_dev->dev.kobj, &ipw2100_attribute_group); + if (err) + goto fail_unlock; /* If the RF Kill switch is disabled, go ahead and complete the * startup sequence */ @@ -6533,13 +6542,17 @@ static int __init ipw2100_init(void) printk(KERN_INFO DRV_NAME ": %s\n", DRV_COPYRIGHT); ret = pci_register_driver(&ipw2100_pci_driver); + if (ret) + goto out; + set_acceptable_latency("ipw2100", INFINITE_LATENCY); #ifdef CONFIG_IPW2100_DEBUG ipw2100_debug_level = debug; - driver_create_file(&ipw2100_pci_driver.driver, - &driver_attr_debug_level); + ret = driver_create_file(&ipw2100_pci_driver.driver, + &driver_attr_debug_level); #endif +out: return ret; } @@ -6554,6 +6567,7 @@ static void __exit ipw2100_exit(void) &driver_attr_debug_level); #endif pci_unregister_driver(&ipw2100_pci_driver); + remove_acceptable_latency("ipw2100"); } module_init(ipw2100_init); @@ -6958,7 +6972,7 @@ static int ipw2100_wx_set_essid(struct net_device *dev, } if (wrqu->essid.flags && wrqu->essid.length) { - length = wrqu->essid.length - 1; + length = wrqu->essid.length; essid = extra; } @@ -7051,7 +7065,7 @@ static int ipw2100_wx_get_nick(struct net_device *dev, struct ipw2100_priv *priv = ieee80211_priv(dev); - wrqu->data.length = strlen(priv->nick) + 1; + wrqu->data.length = strlen(priv->nick); memcpy(extra, priv->nick, wrqu->data.length); wrqu->data.flags = 1; /* active */ @@ -7343,14 +7357,14 @@ static int ipw2100_wx_set_retry(struct net_device *dev, goto done; } - if (wrqu->retry.flags & IW_RETRY_MIN) { + if (wrqu->retry.flags & IW_RETRY_SHORT) { err = ipw2100_set_short_retry(priv, wrqu->retry.value); IPW_DEBUG_WX("SET Short Retry Limit -> %d \n", wrqu->retry.value); goto done; } - if (wrqu->retry.flags & IW_RETRY_MAX) { + if (wrqu->retry.flags & IW_RETRY_LONG) { err = ipw2100_set_long_retry(priv, wrqu->retry.value); IPW_DEBUG_WX("SET Long Retry Limit -> %d \n", wrqu->retry.value); @@ -7383,14 +7397,14 @@ static int ipw2100_wx_get_retry(struct net_device *dev, if ((wrqu->retry.flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) return -EINVAL; - if (wrqu->retry.flags & IW_RETRY_MAX) { - wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_MAX; + if (wrqu->retry.flags & IW_RETRY_LONG) { + wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_LONG; wrqu->retry.value = priv->long_retry_limit; } else { wrqu->retry.flags = (priv->short_retry_limit != priv->long_retry_limit) ? - IW_RETRY_LIMIT | IW_RETRY_MIN : IW_RETRY_LIMIT; + IW_RETRY_LIMIT | IW_RETRY_SHORT : IW_RETRY_LIMIT; wrqu->retry.value = priv->short_retry_limit; } diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index 7358664e090..5685d7ba55b 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -8875,8 +8875,6 @@ static int ipw_wx_set_essid(struct net_device *dev, } length = min((int)wrqu->essid.length, IW_ESSID_MAX_SIZE); - if (!extra[length - 1]) - length--; priv->config |= CFG_STATIC_ESSID; @@ -8953,7 +8951,7 @@ static int ipw_wx_get_nick(struct net_device *dev, struct ipw_priv *priv = ieee80211_priv(dev); IPW_DEBUG_WX("Getting nick\n"); mutex_lock(&priv->mutex); - wrqu->data.length = strlen(priv->nick) + 1; + wrqu->data.length = strlen(priv->nick); memcpy(extra, priv->nick, wrqu->data.length); wrqu->data.flags = 1; /* active */ mutex_unlock(&priv->mutex); @@ -9276,9 +9274,9 @@ static int ipw_wx_set_retry(struct net_device *dev, return -EINVAL; mutex_lock(&priv->mutex); - if (wrqu->retry.flags & IW_RETRY_MIN) + if (wrqu->retry.flags & IW_RETRY_SHORT) priv->short_retry_limit = (u8) wrqu->retry.value; - else if (wrqu->retry.flags & IW_RETRY_MAX) + else if (wrqu->retry.flags & IW_RETRY_LONG) priv->long_retry_limit = (u8) wrqu->retry.value; else { priv->short_retry_limit = (u8) wrqu->retry.value; @@ -9307,11 +9305,11 @@ static int ipw_wx_get_retry(struct net_device *dev, return -EINVAL; } - if (wrqu->retry.flags & IW_RETRY_MAX) { - wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_MAX; + if (wrqu->retry.flags & IW_RETRY_LONG) { + wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_LONG; wrqu->retry.value = priv->long_retry_limit; - } else if (wrqu->retry.flags & IW_RETRY_MIN) { - wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_MIN; + } else if (wrqu->retry.flags & IW_RETRY_SHORT) { + wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_SHORT; wrqu->retry.value = priv->short_retry_limit; } else { wrqu->retry.flags = IW_RETRY_LIMIT; diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 1840b69e3cb..9e19a963feb 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -3037,7 +3037,7 @@ static int orinoco_ioctl_getessid(struct net_device *dev, } erq->flags = 1; - erq->length = strlen(essidbuf) + 1; + erq->length = strlen(essidbuf); return 0; } @@ -3078,7 +3078,7 @@ static int orinoco_ioctl_getnick(struct net_device *dev, memcpy(nickbuf, priv->nick, IW_ESSID_MAX_SIZE+1); orinoco_unlock(priv, &flags); - nrq->length = strlen(nickbuf)+1; + nrq->length = strlen(nickbuf); return 0; } @@ -3575,14 +3575,14 @@ static int orinoco_ioctl_getretry(struct net_device *dev, rrq->value = lifetime * 1000; /* ??? */ } else { /* By default, display the min number */ - if ((rrq->flags & IW_RETRY_MAX)) { - rrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX; + if ((rrq->flags & IW_RETRY_LONG)) { + rrq->flags = IW_RETRY_LIMIT | IW_RETRY_LONG; rrq->value = long_limit; } else { rrq->flags = IW_RETRY_LIMIT; rrq->value = short_limit; if(short_limit != long_limit) - rrq->flags |= IW_RETRY_MIN; + rrq->flags |= IW_RETRY_SHORT; } } diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c index c09fbf733b3..286325ca329 100644 --- a/drivers/net/wireless/prism54/isl_ioctl.c +++ b/drivers/net/wireless/prism54/isl_ioctl.c @@ -742,9 +742,9 @@ prism54_set_essid(struct net_device *ndev, struct iw_request_info *info, /* Check if we were asked for `any' */ if (dwrq->flags && dwrq->length) { - if (dwrq->length > min(33, IW_ESSID_MAX_SIZE + 1)) + if (dwrq->length > 32) return -E2BIG; - essid.length = dwrq->length - 1; + essid.length = dwrq->length; memcpy(essid.octets, extra, dwrq->length); } else essid.length = 0; @@ -814,7 +814,7 @@ prism54_get_nick(struct net_device *ndev, struct iw_request_info *info, dwrq->length = 0; down_read(&priv->mib_sem); - dwrq->length = strlen(priv->nickname) + 1; + dwrq->length = strlen(priv->nickname); memcpy(extra, priv->nickname, dwrq->length); up_read(&priv->mib_sem); @@ -992,9 +992,9 @@ prism54_set_retry(struct net_device *ndev, struct iw_request_info *info, return -EINVAL; if (vwrq->flags & IW_RETRY_LIMIT) { - if (vwrq->flags & IW_RETRY_MIN) + if (vwrq->flags & IW_RETRY_SHORT) slimit = vwrq->value; - else if (vwrq->flags & IW_RETRY_MAX) + else if (vwrq->flags & IW_RETRY_LONG) llimit = vwrq->value; else { /* we are asked to set both */ @@ -1035,18 +1035,18 @@ prism54_get_retry(struct net_device *ndev, struct iw_request_info *info, mgt_get_request(priv, DOT11_OID_MAXTXLIFETIME, 0, NULL, &r); vwrq->value = r.u * 1024; vwrq->flags = IW_RETRY_LIFETIME; - } else if ((vwrq->flags & IW_RETRY_MAX)) { + } else if ((vwrq->flags & IW_RETRY_LONG)) { /* we are asked for the long retry limit */ rvalue |= mgt_get_request(priv, DOT11_OID_LONGRETRIES, 0, NULL, &r); vwrq->value = r.u; - vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX; + vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_LONG; } else { /* default. get the short retry limit */ rvalue |= mgt_get_request(priv, DOT11_OID_SHORTRETRIES, 0, NULL, &r); vwrq->value = r.u; - vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_MIN; + vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_SHORT; } return rvalue; diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index 4574290f971..e82548ea609 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -1173,7 +1173,7 @@ static int ray_set_essid(struct net_device *dev, return -EOPNOTSUPP; } else { /* Check the size of the string */ - if(dwrq->length > IW_ESSID_MAX_SIZE + 1) { + if(dwrq->length > IW_ESSID_MAX_SIZE) { return -E2BIG; } diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c index ccaf28e8db0..337c692f6fd 100644 --- a/drivers/net/wireless/strip.c +++ b/drivers/net/wireless/strip.c @@ -1342,7 +1342,7 @@ static unsigned char *strip_make_packet(unsigned char *buffer, * 'broadcast hub' radio (First byte of address being 0xFF means broadcast) */ if (haddr.c[0] == 0xFF) { - u32 brd = 0; + __be32 brd = 0; struct in_device *in_dev; rcu_read_lock(); @@ -1406,7 +1406,7 @@ static void strip_send(struct strip *strip_info, struct sk_buff *skb) int doreset = (long) jiffies - strip_info->watchdog_doreset >= 0; int doprobe = (long) jiffies - strip_info->watchdog_doprobe >= 0 && !doreset; - u32 addr, brd; + __be32 addr, brd; /* * 1. If we have a packet, encapsulate it and put it in the buffer diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index e0d294c1297..e3ae5f60d5b 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -1802,15 +1802,15 @@ static int wl3501_get_retry(struct net_device *dev, &retry, sizeof(retry)); if (rc) goto out; - if (wrqu->retry.flags & IW_RETRY_MAX) { - wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_MAX; + if (wrqu->retry.flags & IW_RETRY_LONG) { + wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_LONG; goto set_value; } rc = wl3501_get_mib_value(this, WL3501_MIB_ATTR_SHORT_RETRY_LIMIT, &retry, sizeof(retry)); if (rc) goto out; - wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_MIN; + wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_SHORT; set_value: wrqu->retry.value = retry; wrqu->retry.disabled = 0; diff --git a/drivers/net/wireless/zd1201.c b/drivers/net/wireless/zd1201.c index c52e9bcf8d0..80af9a9fcbb 100644 --- a/drivers/net/wireless/zd1201.c +++ b/drivers/net/wireless/zd1201.c @@ -119,7 +119,7 @@ static void zd1201_usbfree(struct urb *urb, struct pt_regs *regs) switch(urb->status) { case -EILSEQ: case -ENODEV: - case -ETIMEDOUT: + case -ETIME: case -ENOENT: case -EPIPE: case -EOVERFLOW: @@ -201,7 +201,7 @@ static void zd1201_usbrx(struct urb *urb, struct pt_regs *regs) switch(urb->status) { case -EILSEQ: case -ENODEV: - case -ETIMEDOUT: + case -ETIME: case -ENOENT: case -EPIPE: case -EOVERFLOW: @@ -1218,7 +1218,7 @@ static int zd1201_set_essid(struct net_device *dev, return -EINVAL; if (data->length < 1) data->length = 1; - zd->essidlen = data->length-1; + zd->essidlen = data->length; memset(zd->essid, 0, IW_ESSID_MAX_SIZE+1); memcpy(zd->essid, essid, data->length); return zd1201_join(zd, zd->essid, zd->essidlen); diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c index 7c4e32cf0d4..aa661b2b76c 100644 --- a/drivers/net/wireless/zd1211rw/zd_chip.c +++ b/drivers/net/wireless/zd1211rw/zd_chip.c @@ -249,7 +249,6 @@ int zd_ioread16(struct zd_chip *chip, zd_addr_t addr, u16 *value) { int r; - ZD_ASSERT(!mutex_is_locked(&chip->mutex)); mutex_lock(&chip->mutex); r = zd_ioread16_locked(chip, value, addr); mutex_unlock(&chip->mutex); @@ -260,7 +259,6 @@ int zd_ioread32(struct zd_chip *chip, zd_addr_t addr, u32 *value) { int r; - ZD_ASSERT(!mutex_is_locked(&chip->mutex)); mutex_lock(&chip->mutex); r = zd_ioread32_locked(chip, value, addr); mutex_unlock(&chip->mutex); @@ -271,7 +269,6 @@ int zd_iowrite16(struct zd_chip *chip, zd_addr_t addr, u16 value) { int r; - ZD_ASSERT(!mutex_is_locked(&chip->mutex)); mutex_lock(&chip->mutex); r = zd_iowrite16_locked(chip, value, addr); mutex_unlock(&chip->mutex); @@ -282,7 +279,6 @@ int zd_iowrite32(struct zd_chip *chip, zd_addr_t addr, u32 value) { int r; - ZD_ASSERT(!mutex_is_locked(&chip->mutex)); mutex_lock(&chip->mutex); r = zd_iowrite32_locked(chip, value, addr); mutex_unlock(&chip->mutex); @@ -294,7 +290,6 @@ int zd_ioread32v(struct zd_chip *chip, const zd_addr_t *addresses, { int r; - ZD_ASSERT(!mutex_is_locked(&chip->mutex)); mutex_lock(&chip->mutex); r = zd_ioread32v_locked(chip, values, addresses, count); mutex_unlock(&chip->mutex); @@ -306,7 +301,6 @@ int zd_iowrite32a(struct zd_chip *chip, const struct zd_ioreq32 *ioreqs, { int r; - ZD_ASSERT(!mutex_is_locked(&chip->mutex)); mutex_lock(&chip->mutex); r = zd_iowrite32a_locked(chip, ioreqs, count); mutex_unlock(&chip->mutex); @@ -331,13 +325,22 @@ static int read_pod(struct zd_chip *chip, u8 *rf_type) chip->patch_cr157 = (value >> 13) & 0x1; chip->patch_6m_band_edge = (value >> 21) & 0x1; chip->new_phy_layout = (value >> 31) & 0x1; + chip->link_led = ((value >> 4) & 1) ? LED1 : LED2; + chip->supports_tx_led = 1; + if (value & (1 << 24)) { /* LED scenario */ + if (value & (1 << 29)) + chip->supports_tx_led = 0; + } dev_dbg_f(zd_chip_dev(chip), "RF %s %#01x PA type %#01x patch CCK %d patch CR157 %d " - "patch 6M %d new PHY %d\n", + "patch 6M %d new PHY %d link LED%d tx led %d\n", zd_rf_name(*rf_type), *rf_type, chip->pa_type, chip->patch_cck_gain, - chip->patch_cr157, chip->patch_6m_band_edge, chip->new_phy_layout); + chip->patch_cr157, chip->patch_6m_band_edge, + chip->new_phy_layout, + chip->link_led == LED1 ? 1 : 2, + chip->supports_tx_led); return 0; error: *rf_type = 0; @@ -1181,7 +1184,7 @@ static int update_pwr_int(struct zd_chip *chip, u8 channel) u8 value = chip->pwr_int_values[channel - 1]; dev_dbg_f(zd_chip_dev(chip), "channel %d pwr_int %#04x\n", channel, value); - return zd_iowrite32_locked(chip, value, CR31); + return zd_iowrite16_locked(chip, value, CR31); } static int update_pwr_cal(struct zd_chip *chip, u8 channel) @@ -1189,12 +1192,12 @@ static int update_pwr_cal(struct zd_chip *chip, u8 channel) u8 value = chip->pwr_cal_values[channel-1]; dev_dbg_f(zd_chip_dev(chip), "channel %d pwr_cal %#04x\n", channel, value); - return zd_iowrite32_locked(chip, value, CR68); + return zd_iowrite16_locked(chip, value, CR68); } static int update_ofdm_cal(struct zd_chip *chip, u8 channel) { - struct zd_ioreq32 ioreqs[3]; + struct zd_ioreq16 ioreqs[3]; ioreqs[0].addr = CR67; ioreqs[0].value = chip->ofdm_cal_values[OFDM_36M_INDEX][channel-1]; @@ -1206,7 +1209,7 @@ static int update_ofdm_cal(struct zd_chip *chip, u8 channel) dev_dbg_f(zd_chip_dev(chip), "channel %d ofdm_cal 36M %#04x 48M %#04x 54M %#04x\n", channel, ioreqs[0].value, ioreqs[1].value, ioreqs[2].value); - return zd_iowrite32a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); + return zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); } static int update_channel_integration_and_calibration(struct zd_chip *chip, @@ -1218,7 +1221,7 @@ static int update_channel_integration_and_calibration(struct zd_chip *chip, if (r) return r; if (chip->is_zd1211b) { - static const struct zd_ioreq32 ioreqs[] = { + static const struct zd_ioreq16 ioreqs[] = { { CR69, 0x28 }, {}, { CR69, 0x2a }, @@ -1230,7 +1233,7 @@ static int update_channel_integration_and_calibration(struct zd_chip *chip, r = update_pwr_cal(chip, channel); if (r) return r; - r = zd_iowrite32a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); + r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); if (r) return r; } @@ -1252,7 +1255,7 @@ static int patch_cck_gain(struct zd_chip *chip) if (r) return r; dev_dbg_f(zd_chip_dev(chip), "patching value %x\n", value & 0xff); - return zd_iowrite32_locked(chip, value & 0xff, CR47); + return zd_iowrite16_locked(chip, value & 0xff, CR47); } int zd_chip_set_channel(struct zd_chip *chip, u8 channel) @@ -1295,89 +1298,60 @@ u8 zd_chip_get_channel(struct zd_chip *chip) return channel; } -static u16 led_mask(int led) +int zd_chip_control_leds(struct zd_chip *chip, enum led_status status) { - switch (led) { - case 1: - return LED1; - case 2: - return LED2; - default: - return 0; - } -} - -static int read_led_reg(struct zd_chip *chip, u16 *status) -{ - ZD_ASSERT(mutex_is_locked(&chip->mutex)); - return zd_ioread16_locked(chip, status, CR_LED); -} - -static int write_led_reg(struct zd_chip *chip, u16 status) -{ - ZD_ASSERT(mutex_is_locked(&chip->mutex)); - return zd_iowrite16_locked(chip, status, CR_LED); -} + static const zd_addr_t a[] = { + FW_LINK_STATUS, + CR_LED, + }; -int zd_chip_led_status(struct zd_chip *chip, int led, enum led_status status) -{ - int r, ret; - u16 mask = led_mask(led); - u16 reg; + int r; + u16 v[ARRAY_SIZE(a)]; + struct zd_ioreq16 ioreqs[ARRAY_SIZE(a)] = { + [0] = { FW_LINK_STATUS }, + [1] = { CR_LED }, + }; + u16 other_led; - if (!mask) - return -EINVAL; mutex_lock(&chip->mutex); - r = read_led_reg(chip, ®); + r = zd_ioread16v_locked(chip, v, (const zd_addr_t *)a, ARRAY_SIZE(a)); if (r) - return r; + goto out; + + other_led = chip->link_led == LED1 ? LED2 : LED1; + switch (status) { - case LED_STATUS: - return (reg & mask) ? LED_ON : LED_OFF; case LED_OFF: - reg &= ~mask; - ret = LED_OFF; + ioreqs[0].value = FW_LINK_OFF; + ioreqs[1].value = v[1] & ~(LED1|LED2); break; - case LED_FLIP: - reg ^= mask; - ret = (reg&mask) ? LED_ON : LED_OFF; + case LED_SCANNING: + ioreqs[0].value = FW_LINK_OFF; + ioreqs[1].value = v[1] & ~other_led; + if (get_seconds() % 3 == 0) { + ioreqs[1].value &= ~chip->link_led; + } else { + ioreqs[1].value |= chip->link_led; + } break; - case LED_ON: - reg |= mask; - ret = LED_ON; + case LED_ASSOCIATED: + ioreqs[0].value = FW_LINK_TX; + ioreqs[1].value = v[1] & ~other_led; + ioreqs[1].value |= chip->link_led; break; default: - return -EINVAL; - } - r = write_led_reg(chip, reg); - if (r) { - ret = r; + r = -EINVAL; goto out; } -out: - mutex_unlock(&chip->mutex); - return r; -} - -int zd_chip_led_flip(struct zd_chip *chip, int led, - const unsigned int *phases_msecs, unsigned int count) -{ - int i, r; - enum led_status status; - r = zd_chip_led_status(chip, led, LED_STATUS); - if (r) - return r; - status = r; - for (i = 0; i < count; i++) { - r = zd_chip_led_status(chip, led, LED_FLIP); - if (r < 0) + if (v[0] != ioreqs[0].value || v[1] != ioreqs[1].value) { + r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs)); + if (r) goto out; - msleep(phases_msecs[i]); } - + r = 0; out: - zd_chip_led_status(chip, led, status); + mutex_unlock(&chip->mutex); return r; } @@ -1679,4 +1653,3 @@ int zd_rfwritev_cr_locked(struct zd_chip *chip, return 0; } - diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h index 4b125085989..ae59597ce4e 100644 --- a/drivers/net/wireless/zd1211rw/zd_chip.h +++ b/drivers/net/wireless/zd1211rw/zd_chip.h @@ -428,6 +428,7 @@ /* masks for controlling LEDs */ #define LED1 0x0100 #define LED2 0x0200 +#define LED_SW 0x0400 /* Seems to indicate that the configuration is over. */ @@ -629,6 +630,10 @@ #define FW_SOFT_RESET FW_REG(4) #define FW_FLASH_CHK FW_REG(5) +#define FW_LINK_OFF 0x0 +#define FW_LINK_TX 0x1 +/* 0x2 - link led on? */ + enum { CR_BASE_OFFSET = 0x9000, FW_START_OFFSET = 0xee00, @@ -663,8 +668,11 @@ struct zd_chip { u8 pwr_int_values[E2P_CHANNEL_COUNT]; /* SetPointOFDM in the vendor driver */ u8 ofdm_cal_values[3][E2P_CHANNEL_COUNT]; - u8 pa_type:4, patch_cck_gain:1, patch_cr157:1, patch_6m_band_edge:1, - new_phy_layout:1, is_zd1211b:1; + u16 link_led; + unsigned int pa_type:4, + patch_cck_gain:1, patch_cr157:1, patch_6m_band_edge:1, + new_phy_layout:1, + is_zd1211b:1, supports_tx_led:1; }; static inline struct zd_chip *zd_usb_to_chip(struct zd_usb *usb) @@ -812,15 +820,12 @@ int zd_chip_lock_phy_regs(struct zd_chip *chip); int zd_chip_unlock_phy_regs(struct zd_chip *chip); enum led_status { - LED_OFF = 0, - LED_ON = 1, - LED_FLIP = 2, - LED_STATUS = 3, + LED_OFF = 0, + LED_SCANNING = 1, + LED_ASSOCIATED = 2, }; -int zd_chip_led_status(struct zd_chip *chip, int led, enum led_status status); -int zd_chip_led_flip(struct zd_chip *chip, int led, - const unsigned int *phases_msecs, unsigned int count); +int zd_chip_control_leds(struct zd_chip *chip, enum led_status status); int zd_set_beacon_interval(struct zd_chip *chip, u32 interval); diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index 1989f1c05fb..2d12837052b 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -33,6 +33,10 @@ static void ieee_init(struct ieee80211_device *ieee); static void softmac_init(struct ieee80211softmac_device *sm); +static void housekeeping_init(struct zd_mac *mac); +static void housekeeping_enable(struct zd_mac *mac); +static void housekeeping_disable(struct zd_mac *mac); + int zd_mac_init(struct zd_mac *mac, struct net_device *netdev, struct usb_interface *intf) @@ -46,6 +50,7 @@ int zd_mac_init(struct zd_mac *mac, ieee_init(ieee); softmac_init(ieee80211_priv(netdev)); zd_chip_init(&mac->chip, netdev, intf); + housekeeping_init(mac); return 0; } @@ -178,6 +183,7 @@ int zd_mac_open(struct net_device *netdev) if (r < 0) goto disable_rx; + housekeeping_enable(mac); ieee80211softmac_start(netdev); return 0; disable_rx: @@ -204,6 +210,7 @@ int zd_mac_stop(struct net_device *netdev) */ zd_chip_disable_rx(chip); + housekeeping_disable(mac); ieee80211softmac_stop(netdev); zd_chip_disable_hwint(chip); @@ -1080,3 +1087,46 @@ void zd_dump_rx_status(const struct rx_status *status) } } #endif /* DEBUG */ + +#define LINK_LED_WORK_DELAY HZ + +static void link_led_handler(void *p) +{ + struct zd_mac *mac = p; + struct zd_chip *chip = &mac->chip; + struct ieee80211softmac_device *sm = ieee80211_priv(mac->netdev); + int is_associated; + int r; + + spin_lock_irq(&mac->lock); + is_associated = sm->associated != 0; + spin_unlock_irq(&mac->lock); + + r = zd_chip_control_leds(chip, + is_associated ? LED_ASSOCIATED : LED_SCANNING); + if (r) + dev_err(zd_mac_dev(mac), "zd_chip_control_leds error %d\n", r); + + queue_delayed_work(zd_workqueue, &mac->housekeeping.link_led_work, + LINK_LED_WORK_DELAY); +} + +static void housekeeping_init(struct zd_mac *mac) +{ + INIT_WORK(&mac->housekeeping.link_led_work, link_led_handler, mac); +} + +static void housekeeping_enable(struct zd_mac *mac) +{ + dev_dbg_f(zd_mac_dev(mac), "\n"); + queue_delayed_work(zd_workqueue, &mac->housekeeping.link_led_work, + 0); +} + +static void housekeeping_disable(struct zd_mac *mac) +{ + dev_dbg_f(zd_mac_dev(mac), "\n"); + cancel_rearming_delayed_workqueue(zd_workqueue, + &mac->housekeeping.link_led_work); + zd_chip_control_leds(&mac->chip, LED_OFF); +} diff --git a/drivers/net/wireless/zd1211rw/zd_mac.h b/drivers/net/wireless/zd1211rw/zd_mac.h index 29b51fd7d4e..b8ea3de7924 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.h +++ b/drivers/net/wireless/zd1211rw/zd_mac.h @@ -120,6 +120,10 @@ enum mac_flags { MAC_FIXED_CHANNEL = 0x01, }; +struct housekeeping { + struct work_struct link_led_work; +}; + #define ZD_MAC_STATS_BUFFER_SIZE 16 struct zd_mac { @@ -128,6 +132,7 @@ struct zd_mac { struct net_device *netdev; /* Unlocked reading possible */ struct iw_statistics iw_stats; + struct housekeeping housekeeping; unsigned int stats_count; u8 qual_buffer[ZD_MAC_STATS_BUFFER_SIZE]; u8 rssi_buffer[ZD_MAC_STATS_BUFFER_SIZE]; diff --git a/drivers/net/wireless/zd1211rw/zd_netdev.c b/drivers/net/wireless/zd1211rw/zd_netdev.c index 440ef24b5fd..af3a7b36d07 100644 --- a/drivers/net/wireless/zd1211rw/zd_netdev.c +++ b/drivers/net/wireless/zd1211rw/zd_netdev.c @@ -82,7 +82,7 @@ static int iw_get_nick(struct net_device *netdev, union iwreq_data *req, char *extra) { strcpy(extra, "zd1211"); - req->data.length = strlen(extra) + 1; + req->data.length = strlen(extra); req->data.flags = 1; return 0; } diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index 31027e52b04..5c265ad0485 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -24,6 +24,7 @@ #include <linux/errno.h> #include <linux/skbuff.h> #include <linux/usb.h> +#include <linux/workqueue.h> #include <net/ieee80211.h> #include "zd_def.h" @@ -1112,12 +1113,20 @@ static struct usb_driver driver = { .disconnect = disconnect, }; +struct workqueue_struct *zd_workqueue; + static int __init usb_init(void) { int r; pr_debug("usb_init()\n"); + zd_workqueue = create_singlethread_workqueue(driver.name); + if (zd_workqueue == NULL) { + printk(KERN_ERR "%s: couldn't create workqueue\n", driver.name); + return -ENOMEM; + } + r = usb_register(&driver); if (r) { printk(KERN_ERR "usb_register() failed. Error number %d\n", r); @@ -1132,6 +1141,7 @@ static void __exit usb_exit(void) { pr_debug("usb_exit()\n"); usb_deregister(&driver); + destroy_workqueue(zd_workqueue); } module_init(usb_init); diff --git a/drivers/net/wireless/zd1211rw/zd_usb.h b/drivers/net/wireless/zd1211rw/zd_usb.h index ded39de5f72..e81a2d3cfff 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.h +++ b/drivers/net/wireless/zd1211rw/zd_usb.h @@ -238,4 +238,6 @@ int zd_usb_iowrite16v(struct zd_usb *usb, const struct zd_ioreq16 *ioreqs, int zd_usb_rfwrite(struct zd_usb *usb, u32 value, u8 bits); +extern struct workqueue_struct *zd_workqueue; + #endif /* _ZD_USB_H */ |