diff options
Diffstat (limited to 'drivers/net')
120 files changed, 9558 insertions, 1322 deletions
diff --git a/drivers/net/3c503.c b/drivers/net/3c503.c index 5b91a85fe10..4f08bd99583 100644 --- a/drivers/net/3c503.c +++ b/drivers/net/3c503.c @@ -353,9 +353,6 @@ el2_probe1(struct net_device *dev, int ioaddr) dev->netdev_ops = &el2_netdev_ops; dev->ethtool_ops = &netdev_ethtool_ops; -#ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = eip_poll; -#endif retval = register_netdev(dev); if (retval) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index e5ffc1c606c..f062b424704 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -972,6 +972,14 @@ config ENC28J60_WRITEVERIFY Enable the verify after the buffer write useful for debugging purpose. If unsure, say N. +config ETHOC + tristate "OpenCores 10/100 Mbps Ethernet MAC support" + depends on NET_ETHERNET + select MII + select PHYLIB + help + Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC. + config SMC911X tristate "SMSC LAN911[5678] support" select CRC32 diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 758ecdf4c82..98409c9dd44 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -230,6 +230,7 @@ obj-$(CONFIG_PASEMI_MAC) += pasemi_mac_driver.o pasemi_mac_driver-objs := pasemi_mac.o pasemi_mac_ethtool.o obj-$(CONFIG_MLX4_CORE) += mlx4/ obj-$(CONFIG_ENC28J60) += enc28j60.o +obj-$(CONFIG_ETHOC) += ethoc.o obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o diff --git a/drivers/net/ac3200.c b/drivers/net/ac3200.c index 071a851a2ea..eac73382c08 100644 --- a/drivers/net/ac3200.c +++ b/drivers/net/ac3200.c @@ -143,6 +143,22 @@ out: } #endif +static const struct net_device_ops ac_netdev_ops = { + .ndo_open = ac_open, + .ndo_stop = ac_close_card, + + .ndo_start_xmit = ei_start_xmit, + .ndo_tx_timeout = ei_tx_timeout, + .ndo_get_stats = ei_get_stats, + .ndo_set_multicast_list = ei_set_multicast_list, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, + .ndo_change_mtu = eth_change_mtu, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = ei_poll, +#endif +}; + static int __init ac_probe1(int ioaddr, struct net_device *dev) { int i, retval; @@ -253,11 +269,7 @@ static int __init ac_probe1(int ioaddr, struct net_device *dev) ei_status.block_output = &ac_block_output; ei_status.get_8390_hdr = &ac_get_8390_hdr; - dev->open = &ac_open; - dev->stop = &ac_close_card; -#ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = ei_poll; -#endif + dev->netdev_ops = &ac_netdev_ops; NS8390_init(dev, 0); retval = register_netdev(dev); diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c index 54819a34ba0..7f832541980 100644 --- a/drivers/net/appletalk/cops.c +++ b/drivers/net/appletalk/cops.c @@ -171,7 +171,6 @@ static unsigned int cops_debug = COPS_DEBUG; struct cops_local { - struct net_device_stats stats; int board; /* Holds what board type is. */ int nodeid; /* Set to 1 once have nodeid. */ unsigned char node_acquire; /* Node ID when acquired. */ @@ -197,7 +196,6 @@ static int cops_send_packet (struct sk_buff *skb, struct net_device *dev); static void set_multicast_list (struct net_device *dev); static int cops_ioctl (struct net_device *dev, struct ifreq *rq, int cmd); static int cops_close (struct net_device *dev); -static struct net_device_stats *cops_get_stats (struct net_device *dev); static void cleanup_card(struct net_device *dev) { @@ -260,6 +258,15 @@ out: return ERR_PTR(err); } +static const struct net_device_ops cops_netdev_ops = { + .ndo_open = cops_open, + .ndo_stop = cops_close, + .ndo_start_xmit = cops_send_packet, + .ndo_tx_timeout = cops_timeout, + .ndo_do_ioctl = cops_ioctl, + .ndo_set_multicast_list = set_multicast_list, +}; + /* * This is the real probe routine. Linux has a history of friendly device * probes on the ISA bus. A good device probes avoids doing writes, and @@ -333,16 +340,9 @@ static int __init cops_probe1(struct net_device *dev, int ioaddr) /* Copy local board variable to lp struct. */ lp->board = board; - dev->hard_start_xmit = cops_send_packet; - dev->tx_timeout = cops_timeout; + dev->netdev_ops = &cops_netdev_ops; dev->watchdog_timeo = HZ * 2; - dev->get_stats = cops_get_stats; - dev->open = cops_open; - dev->stop = cops_close; - dev->do_ioctl = cops_ioctl; - dev->set_multicast_list = set_multicast_list; - dev->mc_list = NULL; /* Tell the user where the card is and what mode we're in. */ if(board==DAYNA) @@ -797,7 +797,7 @@ static void cops_rx(struct net_device *dev) { printk(KERN_WARNING "%s: Memory squeeze, dropping packet.\n", dev->name); - lp->stats.rx_dropped++; + dev->stats.rx_dropped++; while(pkt_len--) /* Discard packet */ inb(ioaddr); spin_unlock_irqrestore(&lp->lock, flags); @@ -819,7 +819,7 @@ static void cops_rx(struct net_device *dev) { printk(KERN_WARNING "%s: Bad packet length of %d bytes.\n", dev->name, pkt_len); - lp->stats.tx_errors++; + dev->stats.tx_errors++; dev_kfree_skb_any(skb); return; } @@ -836,7 +836,7 @@ static void cops_rx(struct net_device *dev) if(rsp_type != LAP_RESPONSE) { printk(KERN_WARNING "%s: Bad packet type %d.\n", dev->name, rsp_type); - lp->stats.tx_errors++; + dev->stats.tx_errors++; dev_kfree_skb_any(skb); return; } @@ -846,8 +846,8 @@ static void cops_rx(struct net_device *dev) skb_reset_transport_header(skb); /* Point to data (Skip header). */ /* Update the counters. */ - lp->stats.rx_packets++; - lp->stats.rx_bytes += skb->len; + dev->stats.rx_packets++; + dev->stats.rx_bytes += skb->len; /* Send packet to a higher place. */ netif_rx(skb); @@ -858,7 +858,7 @@ static void cops_timeout(struct net_device *dev) struct cops_local *lp = netdev_priv(dev); int ioaddr = dev->base_addr; - lp->stats.tx_errors++; + dev->stats.tx_errors++; if(lp->board==TANGENT) { if((inb(ioaddr+TANG_CARD_STATUS)&TANG_TX_READY)==0) @@ -916,8 +916,8 @@ static int cops_send_packet(struct sk_buff *skb, struct net_device *dev) spin_unlock_irqrestore(&lp->lock, flags); /* Restore interrupts. */ /* Done sending packet, update counters and cleanup. */ - lp->stats.tx_packets++; - lp->stats.tx_bytes += skb->len; + dev->stats.tx_packets++; + dev->stats.tx_bytes += skb->len; dev->trans_start = jiffies; dev_kfree_skb (skb); return 0; @@ -986,15 +986,6 @@ static int cops_close(struct net_device *dev) return 0; } -/* - * Get the current statistics. - * This may be called with the card open or closed. - */ -static struct net_device_stats *cops_get_stats(struct net_device *dev) -{ - struct cops_local *lp = netdev_priv(dev); - return &lp->stats; -} #ifdef MODULE static struct net_device *cops_dev; diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c index dc4d4960560..78cc7146913 100644 --- a/drivers/net/appletalk/ltpc.c +++ b/drivers/net/appletalk/ltpc.c @@ -261,7 +261,6 @@ static unsigned char *ltdmacbuf; struct ltpc_private { - struct net_device_stats stats; struct atalk_addr my_addr; }; @@ -699,7 +698,6 @@ static int do_read(struct net_device *dev, void *cbuf, int cbuflen, static struct timer_list ltpc_timer; static int ltpc_xmit(struct sk_buff *skb, struct net_device *dev); -static struct net_device_stats *ltpc_get_stats(struct net_device *dev); static int read_30 ( struct net_device *dev) { @@ -726,8 +724,6 @@ static int sendup_buffer (struct net_device *dev) int dnode, snode, llaptype, len; int sklen; struct sk_buff *skb; - struct ltpc_private *ltpc_priv = netdev_priv(dev); - struct net_device_stats *stats = <pc_priv->stats; struct lt_rcvlap *ltc = (struct lt_rcvlap *) ltdmacbuf; if (ltc->command != LT_RCVLAP) { @@ -779,8 +775,8 @@ static int sendup_buffer (struct net_device *dev) skb_reset_transport_header(skb); - stats->rx_packets++; - stats->rx_bytes+=skb->len; + dev->stats.rx_packets++; + dev->stats.rx_bytes += skb->len; /* toss it onwards */ netif_rx(skb); @@ -904,10 +900,6 @@ static int ltpc_xmit(struct sk_buff *skb, struct net_device *dev) /* in kernel 1.3.xx, on entry skb->data points to ddp header, * and skb->len is the length of the ddp data + ddp header */ - - struct ltpc_private *ltpc_priv = netdev_priv(dev); - struct net_device_stats *stats = <pc_priv->stats; - int i; struct lt_sendlap cbuf; unsigned char *hdr; @@ -936,20 +928,13 @@ static int ltpc_xmit(struct sk_buff *skb, struct net_device *dev) printk("\n"); } - stats->tx_packets++; - stats->tx_bytes+=skb->len; + dev->stats.tx_packets++; + dev->stats.tx_bytes += skb->len; dev_kfree_skb(skb); return 0; } -static struct net_device_stats *ltpc_get_stats(struct net_device *dev) -{ - struct ltpc_private *ltpc_priv = netdev_priv(dev); - struct net_device_stats *stats = <pc_priv->stats; - return stats; -} - /* initialization stuff */ static int __init ltpc_probe_dma(int base, int dma) @@ -1027,6 +1012,12 @@ static int __init ltpc_probe_dma(int base, int dma) return (want & 2) ? 3 : 1; } +static const struct net_device_ops ltpc_netdev = { + .ndo_start_xmit = ltpc_xmit, + .ndo_do_ioctl = ltpc_ioctl, + .ndo_set_multicast_list = set_multicast_list, +}; + struct net_device * __init ltpc_probe(void) { struct net_device *dev; @@ -1133,14 +1124,7 @@ struct net_device * __init ltpc_probe(void) else printk(KERN_INFO "Apple/Farallon LocalTalk-PC card at %03x, DMA%d. Using polled mode.\n",io,dma); - /* Fill in the fields of the device structure with ethernet-generic values. */ - dev->hard_start_xmit = ltpc_xmit; - dev->get_stats = ltpc_get_stats; - - /* add the ltpc-specific things */ - dev->do_ioctl = <pc_ioctl; - - dev->set_multicast_list = &set_multicast_list; + dev->netdev_ops = <pc_netdev; dev->mc_list = NULL; dev->base_addr = io; dev->irq = irq; diff --git a/drivers/net/at1700.c b/drivers/net/at1700.c index ced70799b89..18b566ad4fd 100644 --- a/drivers/net/at1700.c +++ b/drivers/net/at1700.c @@ -249,6 +249,17 @@ out: return ERR_PTR(err); } +static const struct net_device_ops at1700_netdev_ops = { + .ndo_open = net_open, + .ndo_stop = net_close, + .ndo_start_xmit = net_send_packet, + .ndo_set_multicast_list = set_rx_mode, + .ndo_tx_timeout = net_tx_timeout, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + /* The Fujitsu datasheet suggests that the NIC be probed for by checking its "signature", the default bit pattern after a reset. This *doesn't* work -- there is no way to reset the bus interface without a complete power-cycle! @@ -448,13 +459,7 @@ found: if (net_debug) printk(version); - memset(lp, 0, sizeof(struct net_local)); - - dev->open = net_open; - dev->stop = net_close; - dev->hard_start_xmit = net_send_packet; - dev->set_multicast_list = &set_rx_mode; - dev->tx_timeout = net_tx_timeout; + dev->netdev_ops = &at1700_netdev_ops; dev->watchdog_timeo = TX_TIMEOUT; spin_lock_init(&lp->lock); diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index f901fee79a2..9b75aa63006 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -16,6 +16,7 @@ */ #include "be.h" +#include <asm/div64.h> MODULE_VERSION(DRV_VER); MODULE_DEVICE_TABLE(pci, be_dev_ids); @@ -290,6 +291,17 @@ static struct net_device_stats *be_get_stats(struct net_device *dev) return &adapter->stats.net_stats; } +static u32 be_calc_rate(u64 bytes, unsigned long ticks) +{ + u64 rate = bytes; + + do_div(rate, ticks / HZ); + rate <<= 3; /* bytes/sec -> bits/sec */ + do_div(rate, 1000000ul); /* MB/Sec */ + + return rate; +} + static void be_tx_rate_update(struct be_adapter *adapter) { struct be_drvr_stats *stats = drvr_stats(adapter); @@ -303,11 +315,9 @@ static void be_tx_rate_update(struct be_adapter *adapter) /* Update tx rate once in two seconds */ if ((now - stats->be_tx_jiffies) > 2 * HZ) { - u32 r; - r = (stats->be_tx_bytes - stats->be_tx_bytes_prev) / - ((now - stats->be_tx_jiffies) / HZ); - r = r / 1000000; /* M bytes/s */ - stats->be_tx_rate = r * 8; /* M bits/s */ + stats->be_tx_rate = be_calc_rate(stats->be_tx_bytes + - stats->be_tx_bytes_prev, + now - stats->be_tx_jiffies); stats->be_tx_jiffies = now; stats->be_tx_bytes_prev = stats->be_tx_bytes; } @@ -599,7 +609,6 @@ static void be_rx_rate_update(struct be_adapter *adapter) { struct be_drvr_stats *stats = drvr_stats(adapter); ulong now = jiffies; - u32 rate; /* Wrapped around */ if (time_before(now, stats->be_rx_jiffies)) { @@ -611,10 +620,9 @@ static void be_rx_rate_update(struct be_adapter *adapter) if ((now - stats->be_rx_jiffies) < 2 * HZ) return; - rate = (stats->be_rx_bytes - stats->be_rx_bytes_prev) / - ((now - stats->be_rx_jiffies) / HZ); - rate = rate / 1000000; /* MB/Sec */ - stats->be_rx_rate = rate * 8; /* Mega Bits/Sec */ + stats->be_rx_rate = be_calc_rate(stats->be_rx_bytes + - stats->be_rx_bytes_prev, + now - stats->be_rx_jiffies); stats->be_rx_jiffies = now; stats->be_rx_bytes_prev = stats->be_rx_bytes; } diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c index ff6497658a4..7433b88eed7 100644 --- a/drivers/net/cs89x0.c +++ b/drivers/net/cs89x0.c @@ -501,6 +501,21 @@ static void net_poll_controller(struct net_device *dev) } #endif +static const struct net_device_ops net_ops = { + .ndo_open = net_open, + .ndo_stop = net_close, + .ndo_tx_timeout = net_timeout, + .ndo_start_xmit = net_send_packet, + .ndo_get_stats = net_get_stats, + .ndo_set_multicast_list = set_multicast_list, + .ndo_set_mac_address = set_mac_address, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = net_poll_controller, +#endif + .ndo_change_mtu = eth_change_mtu, + .ndo_validate_addr = eth_validate_addr, +}; + /* This is the real probe routine. Linux has a history of friendly device probes on the ISA bus. A good device probes avoids doing writes, and verifies that the correct device exists and functions. @@ -843,17 +858,8 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular) /* print the ethernet address. */ printk(", MAC %pM", dev->dev_addr); - dev->open = net_open; - dev->stop = net_close; - dev->tx_timeout = net_timeout; - dev->watchdog_timeo = HZ; - dev->hard_start_xmit = net_send_packet; - dev->get_stats = net_get_stats; - dev->set_multicast_list = set_multicast_list; - dev->set_mac_address = set_mac_address; -#ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = net_poll_controller; -#endif + dev->netdev_ops = &net_ops; + dev->watchdog_timeo = HZ; printk("\n"); if (net_debug) diff --git a/drivers/net/cxgb3/adapter.h b/drivers/net/cxgb3/adapter.h index 71eaa431371..714df2b675e 100644 --- a/drivers/net/cxgb3/adapter.h +++ b/drivers/net/cxgb3/adapter.h @@ -85,6 +85,8 @@ struct fl_pg_chunk { struct page *page; void *va; unsigned int offset; + u64 *p_cnt; + DECLARE_PCI_UNMAP_ADDR(mapping); }; struct rx_desc; @@ -101,6 +103,7 @@ struct sge_fl { /* SGE per free-buffer list state */ struct fl_pg_chunk pg_chunk;/* page chunk cache */ unsigned int use_pages; /* whether FL uses pages or sk_buffs */ unsigned int order; /* order of page allocations */ + unsigned int alloc_size; /* size of allocated buffer */ struct rx_desc *desc; /* address of HW Rx descriptor ring */ struct rx_sw_desc *sdesc; /* address of SW Rx descriptor ring */ dma_addr_t phys_addr; /* physical address of HW ring start */ @@ -291,6 +294,7 @@ void t3_os_link_fault_handler(struct adapter *adapter, int port_id); void t3_sge_start(struct adapter *adap); void t3_sge_stop(struct adapter *adap); +void t3_start_sge_timers(struct adapter *adap); void t3_stop_sge_timers(struct adapter *adap); void t3_free_sge_resources(struct adapter *adap); void t3_sge_err_intr_handler(struct adapter *adapter); diff --git a/drivers/net/cxgb3/common.h b/drivers/net/cxgb3/common.h index 9ee021e750c..e508dc32f3e 100644 --- a/drivers/net/cxgb3/common.h +++ b/drivers/net/cxgb3/common.h @@ -191,7 +191,8 @@ struct mdio_ops { }; struct adapter_info { - unsigned char nports; /* # of ports */ + unsigned char nports0; /* # of ports on channel 0 */ + unsigned char nports1; /* # of ports on channel 1 */ unsigned char phy_base_addr; /* MDIO PHY base address */ unsigned int gpio_out; /* GPIO output settings */ unsigned char gpio_intr[MAX_NPORTS]; /* GPIO PHY IRQ pins */ @@ -422,6 +423,7 @@ struct adapter_params { unsigned short b_wnd[NCCTRL_WIN]; unsigned int nports; /* # of ethernet ports */ + unsigned int chan_map; /* bitmap of in-use Tx channels */ unsigned int stats_update_period; /* MAC stats accumulation period */ unsigned int linkpoll_period; /* link poll period in 0.1s */ unsigned int rev; /* chip revision */ diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index d8be89621bf..2c2aaa74145 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -602,7 +602,6 @@ static int setup_sge_qsets(struct adapter *adap) &adap->params.sge.qset[qset_idx], ntxq, dev, netdev_get_tx_queue(dev, j)); if (err) { - t3_stop_sge_timers(adap); t3_free_sge_resources(adap); return err; } @@ -1046,6 +1045,8 @@ static int cxgb_up(struct adapter *adap) setup_rss(adap); if (!(adap->flags & NAPI_INIT)) init_napi(adap); + + t3_start_sge_timers(adap); adap->flags |= FULL_INIT_DONE; } @@ -2870,6 +2871,9 @@ static void t3_io_resume(struct pci_dev *pdev) { struct adapter *adapter = pci_get_drvdata(pdev); + CH_ALERT(adapter, "adapter recovering, PEX ERR 0x%x\n", + t3_read_reg(adapter, A_PCIE_PEX_ERR)); + t3_resume_ports(adapter); } @@ -3002,7 +3006,7 @@ static int __devinit init_one(struct pci_dev *pdev, static int version_printed; int i, err, pci_using_dac = 0; - unsigned long mmio_start, mmio_len; + resource_size_t mmio_start, mmio_len; const struct adapter_info *ai; struct adapter *adapter = NULL; struct port_info *pi; @@ -3082,7 +3086,7 @@ static int __devinit init_one(struct pci_dev *pdev, INIT_WORK(&adapter->fatal_error_handler_task, fatal_error_task); INIT_DELAYED_WORK(&adapter->adap_check_task, t3_adap_check_task); - for (i = 0; i < ai->nports; ++i) { + for (i = 0; i < ai->nports0 + ai->nports1; ++i) { struct net_device *netdev; netdev = alloc_etherdev_mq(sizeof(struct port_info), SGE_QSETS); @@ -3172,7 +3176,7 @@ static int __devinit init_one(struct pci_dev *pdev, out_free_dev: iounmap(adapter->regs); - for (i = ai->nports - 1; i >= 0; --i) + for (i = ai->nports0 + ai->nports1 - 1; i >= 0; --i) if (adapter->port[i]) free_netdev(adapter->port[i]); diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c index a7555cb3fa4..26d3587f339 100644 --- a/drivers/net/cxgb3/sge.c +++ b/drivers/net/cxgb3/sge.c @@ -50,6 +50,7 @@ #define SGE_RX_COPY_THRES 256 #define SGE_RX_PULL_LEN 128 +#define SGE_PG_RSVD SMP_CACHE_BYTES /* * Page chunk size for FL0 buffers if FL0 is to be populated with page chunks. * It must be a divisor of PAGE_SIZE. If set to 0 FL0 will use sk_buffs @@ -57,8 +58,10 @@ */ #define FL0_PG_CHUNK_SIZE 2048 #define FL0_PG_ORDER 0 +#define FL0_PG_ALLOC_SIZE (PAGE_SIZE << FL0_PG_ORDER) #define FL1_PG_CHUNK_SIZE (PAGE_SIZE > 8192 ? 16384 : 8192) #define FL1_PG_ORDER (PAGE_SIZE > 8192 ? 0 : 1) +#define FL1_PG_ALLOC_SIZE (PAGE_SIZE << FL1_PG_ORDER) #define SGE_RX_DROP_THRES 16 #define RX_RECLAIM_PERIOD (HZ/4) @@ -345,13 +348,21 @@ static inline int should_restart_tx(const struct sge_txq *q) return q->in_use - r < (q->size >> 1); } -static void clear_rx_desc(const struct sge_fl *q, struct rx_sw_desc *d) +static void clear_rx_desc(struct pci_dev *pdev, const struct sge_fl *q, + struct rx_sw_desc *d) { - if (q->use_pages) { - if (d->pg_chunk.page) - put_page(d->pg_chunk.page); + if (q->use_pages && d->pg_chunk.page) { + (*d->pg_chunk.p_cnt)--; + if (!*d->pg_chunk.p_cnt) + pci_unmap_page(pdev, + pci_unmap_addr(&d->pg_chunk, mapping), + q->alloc_size, PCI_DMA_FROMDEVICE); + + put_page(d->pg_chunk.page); d->pg_chunk.page = NULL; } else { + pci_unmap_single(pdev, pci_unmap_addr(d, dma_addr), + q->buf_size, PCI_DMA_FROMDEVICE); kfree_skb(d->skb); d->skb = NULL; } @@ -372,9 +383,8 @@ static void free_rx_bufs(struct pci_dev *pdev, struct sge_fl *q) while (q->credits--) { struct rx_sw_desc *d = &q->sdesc[cidx]; - pci_unmap_single(pdev, pci_unmap_addr(d, dma_addr), - q->buf_size, PCI_DMA_FROMDEVICE); - clear_rx_desc(q, d); + + clear_rx_desc(pdev, q, d); if (++cidx == q->size) cidx = 0; } @@ -417,18 +427,39 @@ static inline int add_one_rx_buf(void *va, unsigned int len, return 0; } -static int alloc_pg_chunk(struct sge_fl *q, struct rx_sw_desc *sd, gfp_t gfp, +static inline int add_one_rx_chunk(dma_addr_t mapping, struct rx_desc *d, + unsigned int gen) +{ + d->addr_lo = cpu_to_be32(mapping); + d->addr_hi = cpu_to_be32((u64) mapping >> 32); + wmb(); + d->len_gen = cpu_to_be32(V_FLD_GEN1(gen)); + d->gen2 = cpu_to_be32(V_FLD_GEN2(gen)); + return 0; +} + +static int alloc_pg_chunk(struct adapter *adapter, struct sge_fl *q, + struct rx_sw_desc *sd, gfp_t gfp, unsigned int order) { if (!q->pg_chunk.page) { + dma_addr_t mapping; + q->pg_chunk.page = alloc_pages(gfp, order); if (unlikely(!q->pg_chunk.page)) return -ENOMEM; q->pg_chunk.va = page_address(q->pg_chunk.page); + q->pg_chunk.p_cnt = q->pg_chunk.va + (PAGE_SIZE << order) - + SGE_PG_RSVD; q->pg_chunk.offset = 0; + mapping = pci_map_page(adapter->pdev, q->pg_chunk.page, + 0, q->alloc_size, PCI_DMA_FROMDEVICE); + pci_unmap_addr_set(&q->pg_chunk, mapping, mapping); } sd->pg_chunk = q->pg_chunk; + prefetch(sd->pg_chunk.p_cnt); + q->pg_chunk.offset += q->buf_size; if (q->pg_chunk.offset == (PAGE_SIZE << order)) q->pg_chunk.page = NULL; @@ -436,6 +467,12 @@ static int alloc_pg_chunk(struct sge_fl *q, struct rx_sw_desc *sd, gfp_t gfp, q->pg_chunk.va += q->buf_size; get_page(q->pg_chunk.page); } + + if (sd->pg_chunk.offset == 0) + *sd->pg_chunk.p_cnt = 1; + else + *sd->pg_chunk.p_cnt += 1; + return 0; } @@ -460,35 +497,43 @@ static inline void ring_fl_db(struct adapter *adap, struct sge_fl *q) */ static int refill_fl(struct adapter *adap, struct sge_fl *q, int n, gfp_t gfp) { - void *buf_start; struct rx_sw_desc *sd = &q->sdesc[q->pidx]; struct rx_desc *d = &q->desc[q->pidx]; unsigned int count = 0; while (n--) { + dma_addr_t mapping; int err; if (q->use_pages) { - if (unlikely(alloc_pg_chunk(q, sd, gfp, q->order))) { + if (unlikely(alloc_pg_chunk(adap, q, sd, gfp, + q->order))) { nomem: q->alloc_failed++; break; } - buf_start = sd->pg_chunk.va; + mapping = pci_unmap_addr(&sd->pg_chunk, mapping) + + sd->pg_chunk.offset; + pci_unmap_addr_set(sd, dma_addr, mapping); + + add_one_rx_chunk(mapping, d, q->gen); + pci_dma_sync_single_for_device(adap->pdev, mapping, + q->buf_size - SGE_PG_RSVD, + PCI_DMA_FROMDEVICE); } else { - struct sk_buff *skb = alloc_skb(q->buf_size, gfp); + void *buf_start; + struct sk_buff *skb = alloc_skb(q->buf_size, gfp); if (!skb) goto nomem; sd->skb = skb; buf_start = skb->data; - } - - err = add_one_rx_buf(buf_start, q->buf_size, d, sd, q->gen, - adap->pdev); - if (unlikely(err)) { - clear_rx_desc(q, sd); - break; + err = add_one_rx_buf(buf_start, q->buf_size, d, sd, + q->gen, adap->pdev); + if (unlikely(err)) { + clear_rx_desc(adap->pdev, q, sd); + break; + } } d++; @@ -795,19 +840,19 @@ static struct sk_buff *get_packet_pg(struct adapter *adap, struct sge_fl *fl, struct sk_buff *newskb, *skb; struct rx_sw_desc *sd = &fl->sdesc[fl->cidx]; - newskb = skb = q->pg_skb; + dma_addr_t dma_addr = pci_unmap_addr(sd, dma_addr); + newskb = skb = q->pg_skb; if (!skb && (len <= SGE_RX_COPY_THRES)) { newskb = alloc_skb(len, GFP_ATOMIC); if (likely(newskb != NULL)) { __skb_put(newskb, len); - pci_dma_sync_single_for_cpu(adap->pdev, - pci_unmap_addr(sd, dma_addr), len, + pci_dma_sync_single_for_cpu(adap->pdev, dma_addr, len, PCI_DMA_FROMDEVICE); memcpy(newskb->data, sd->pg_chunk.va, len); - pci_dma_sync_single_for_device(adap->pdev, - pci_unmap_addr(sd, dma_addr), len, - PCI_DMA_FROMDEVICE); + pci_dma_sync_single_for_device(adap->pdev, dma_addr, + len, + PCI_DMA_FROMDEVICE); } else if (!drop_thres) return NULL; recycle: @@ -820,16 +865,25 @@ recycle: if (unlikely(q->rx_recycle_buf || (!skb && fl->credits <= drop_thres))) goto recycle; + prefetch(sd->pg_chunk.p_cnt); + if (!skb) newskb = alloc_skb(SGE_RX_PULL_LEN, GFP_ATOMIC); + if (unlikely(!newskb)) { if (!drop_thres) return NULL; goto recycle; } - pci_unmap_single(adap->pdev, pci_unmap_addr(sd, dma_addr), - fl->buf_size, PCI_DMA_FROMDEVICE); + pci_dma_sync_single_for_cpu(adap->pdev, dma_addr, len, + PCI_DMA_FROMDEVICE); + (*sd->pg_chunk.p_cnt)--; + if (!*sd->pg_chunk.p_cnt) + pci_unmap_page(adap->pdev, + pci_unmap_addr(&sd->pg_chunk, mapping), + fl->alloc_size, + PCI_DMA_FROMDEVICE); if (!skb) { __skb_put(newskb, SGE_RX_PULL_LEN); memcpy(newskb->data, sd->pg_chunk.va, SGE_RX_PULL_LEN); @@ -1089,7 +1143,7 @@ static void write_tx_pkt_wr(struct adapter *adap, struct sk_buff *skb, struct tx_desc *d = &q->desc[pidx]; struct cpl_tx_pkt *cpl = (struct cpl_tx_pkt *)d; - cpl->len = htonl(skb->len | 0x80000000); + cpl->len = htonl(skb->len); cntrl = V_TXPKT_INTF(pi->port_id); if (vlan_tx_tag_present(skb) && pi->vlan_grp) @@ -1958,8 +2012,8 @@ static void rx_eth(struct adapter *adap, struct sge_rspq *rq, skb_pull(skb, sizeof(*p) + pad); skb->protocol = eth_type_trans(skb, adap->port[p->iff]); pi = netdev_priv(skb->dev); - if ((pi->rx_offload & T3_RX_CSUM) && p->csum_valid && p->csum == htons(0xffff) && - !p->fragment) { + if ((pi->rx_offload & T3_RX_CSUM) && p->csum_valid && + p->csum == htons(0xffff) && !p->fragment) { qs->port_stats[SGE_PSTAT_RX_CSUM_GOOD]++; skb->ip_summed = CHECKSUM_UNNECESSARY; } else @@ -2034,10 +2088,19 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs, fl->credits--; len -= offset; - pci_unmap_single(adap->pdev, pci_unmap_addr(sd, dma_addr), - fl->buf_size, PCI_DMA_FROMDEVICE); + pci_dma_sync_single_for_cpu(adap->pdev, + pci_unmap_addr(sd, dma_addr), + fl->buf_size - SGE_PG_RSVD, + PCI_DMA_FROMDEVICE); - prefetch(&qs->lro_frag_tbl); + (*sd->pg_chunk.p_cnt)--; + if (!*sd->pg_chunk.p_cnt) + pci_unmap_page(adap->pdev, + pci_unmap_addr(&sd->pg_chunk, mapping), + fl->alloc_size, + PCI_DMA_FROMDEVICE); + + prefetch(qs->lro_va); rx_frag += nr_frags; rx_frag->page = sd->pg_chunk.page; @@ -2047,6 +2110,7 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs, qs->lro_frag_tbl.nr_frags++; qs->lro_frag_tbl.len = frag_len; + if (!complete) return; @@ -2236,6 +2300,8 @@ no_mem: if (fl->use_pages) { void *addr = fl->sdesc[fl->cidx].pg_chunk.va; + prefetch(&qs->lro_frag_tbl); + prefetch(addr); #if L1_CACHE_BYTES < 128 prefetch(addr + L1_CACHE_BYTES); @@ -2972,21 +3038,23 @@ int t3_sge_alloc_qset(struct adapter *adapter, unsigned int id, int nports, q->fl[1].use_pages = FL1_PG_CHUNK_SIZE > 0; q->fl[0].order = FL0_PG_ORDER; q->fl[1].order = FL1_PG_ORDER; + q->fl[0].alloc_size = FL0_PG_ALLOC_SIZE; + q->fl[1].alloc_size = FL1_PG_ALLOC_SIZE; spin_lock_irq(&adapter->sge.reg_lock); /* FL threshold comparison uses < */ ret = t3_sge_init_rspcntxt(adapter, q->rspq.cntxt_id, irq_vec_idx, q->rspq.phys_addr, q->rspq.size, - q->fl[0].buf_size, 1, 0); + q->fl[0].buf_size - SGE_PG_RSVD, 1, 0); if (ret) goto err_unlock; for (i = 0; i < SGE_RXQ_PER_SET; ++i) { ret = t3_sge_init_flcntxt(adapter, q->fl[i].cntxt_id, 0, q->fl[i].phys_addr, q->fl[i].size, - q->fl[i].buf_size, p->cong_thres, 1, - 0); + q->fl[i].buf_size - SGE_PG_RSVD, + p->cong_thres, 1, 0); if (ret) goto err_unlock; } @@ -3044,9 +3112,6 @@ int t3_sge_alloc_qset(struct adapter *adapter, unsigned int id, int nports, t3_write_reg(adapter, A_SG_GTS, V_RSPQ(q->rspq.cntxt_id) | V_NEWTIMER(q->rspq.holdoff_tmr)); - mod_timer(&q->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD); - mod_timer(&q->rx_reclaim_timer, jiffies + RX_RECLAIM_PERIOD); - return 0; err_unlock: @@ -3057,6 +3122,27 @@ err: } /** + * t3_start_sge_timers - start SGE timer call backs + * @adap: the adapter + * + * Starts each SGE queue set's timer call back + */ +void t3_start_sge_timers(struct adapter *adap) +{ + int i; + + for (i = 0; i < SGE_QSETS; ++i) { + struct sge_qset *q = &adap->sge.qs[i]; + + if (q->tx_reclaim_timer.function) + mod_timer(&q->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD); + + if (q->rx_reclaim_timer.function) + mod_timer(&q->rx_reclaim_timer, jiffies + RX_RECLAIM_PERIOD); + } +} + +/** * t3_stop_sge_timers - stop SGE timer call backs * @adap: the adapter * diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c index ff262a04ded..31ed31a3428 100644 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -493,20 +493,20 @@ int t3_phy_lasi_intr_handler(struct cphy *phy) } static const struct adapter_info t3_adap_info[] = { - {2, 0, + {1, 1, 0, F_GPIO2_OEN | F_GPIO4_OEN | F_GPIO2_OUT_VAL | F_GPIO4_OUT_VAL, { S_GPIO3, S_GPIO5 }, 0, &mi1_mdio_ops, "Chelsio PE9000"}, - {2, 0, + {1, 1, 0, F_GPIO2_OEN | F_GPIO4_OEN | F_GPIO2_OUT_VAL | F_GPIO4_OUT_VAL, { S_GPIO3, S_GPIO5 }, 0, &mi1_mdio_ops, "Chelsio T302"}, - {1, 0, + {1, 0, 0, F_GPIO1_OEN | F_GPIO6_OEN | F_GPIO7_OEN | F_GPIO10_OEN | F_GPIO11_OEN | F_GPIO1_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL, { 0 }, SUPPORTED_10000baseT_Full | SUPPORTED_AUI, &mi1_mdio_ext_ops, "Chelsio T310"}, - {2, 0, + {1, 1, 0, F_GPIO1_OEN | F_GPIO2_OEN | F_GPIO4_OEN | F_GPIO5_OEN | F_GPIO6_OEN | F_GPIO7_OEN | F_GPIO10_OEN | F_GPIO11_OEN | F_GPIO1_OUT_VAL | F_GPIO5_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL, @@ -514,7 +514,7 @@ static const struct adapter_info t3_adap_info[] = { &mi1_mdio_ext_ops, "Chelsio T320"}, {}, {}, - {1, 0, + {1, 0, 0, F_GPIO1_OEN | F_GPIO2_OEN | F_GPIO4_OEN | F_GPIO6_OEN | F_GPIO7_OEN | F_GPIO10_OEN | F_GPIO1_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL, { S_GPIO9 }, SUPPORTED_10000baseT_Full | SUPPORTED_AUI, @@ -2128,16 +2128,40 @@ void t3_port_intr_clear(struct adapter *adapter, int idx) static int t3_sge_write_context(struct adapter *adapter, unsigned int id, unsigned int type) { - t3_write_reg(adapter, A_SG_CONTEXT_MASK0, 0xffffffff); - t3_write_reg(adapter, A_SG_CONTEXT_MASK1, 0xffffffff); - t3_write_reg(adapter, A_SG_CONTEXT_MASK2, 0xffffffff); - t3_write_reg(adapter, A_SG_CONTEXT_MASK3, 0xffffffff); + if (type == F_RESPONSEQ) { + /* + * Can't write the Response Queue Context bits for + * Interrupt Armed or the Reserve bits after the chip + * has been initialized out of reset. Writing to these + * bits can confuse the hardware. + */ + t3_write_reg(adapter, A_SG_CONTEXT_MASK0, 0xffffffff); + t3_write_reg(adapter, A_SG_CONTEXT_MASK1, 0xffffffff); + t3_write_reg(adapter, A_SG_CONTEXT_MASK2, 0x17ffffff); + t3_write_reg(adapter, A_SG_CONTEXT_MASK3, 0xffffffff); + } else { + t3_write_reg(adapter, A_SG_CONTEXT_MASK0, 0xffffffff); + t3_write_reg(adapter, A_SG_CONTEXT_MASK1, 0xffffffff); + t3_write_reg(adapter, A_SG_CONTEXT_MASK2, 0xffffffff); + t3_write_reg(adapter, A_SG_CONTEXT_MASK3, 0xffffffff); + } t3_write_reg(adapter, A_SG_CONTEXT_CMD, V_CONTEXT_CMD_OPCODE(1) | type | V_CONTEXT(id)); return t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY, 0, SG_CONTEXT_CMD_ATTEMPTS, 1); } +/** + * clear_sge_ctxt - completely clear an SGE context + * @adapter: the adapter + * @id: the context id + * @type: the context type + * + * Completely clear an SGE context. Used predominantly at post-reset + * initialization. Note in particular that we don't skip writing to any + * "sensitive bits" in the contexts the way that t3_sge_write_context() + * does ... + */ static int clear_sge_ctxt(struct adapter *adap, unsigned int id, unsigned int type) { @@ -2145,7 +2169,14 @@ static int clear_sge_ctxt(struct adapter *adap, unsigned int id, t3_write_reg(adap, A_SG_CONTEXT_DATA1, 0); t3_write_reg(adap, A_SG_CONTEXT_DATA2, 0); t3_write_reg(adap, A_SG_CONTEXT_DATA3, 0); - return t3_sge_write_context(adap, id, type); + t3_write_reg(adap, A_SG_CONTEXT_MASK0, 0xffffffff); + t3_write_reg(adap, A_SG_CONTEXT_MASK1, 0xffffffff); + t3_write_reg(adap, A_SG_CONTEXT_MASK2, 0xffffffff); + t3_write_reg(adap, A_SG_CONTEXT_MASK3, 0xffffffff); + t3_write_reg(adap, A_SG_CONTEXT_CMD, + V_CONTEXT_CMD_OPCODE(1) | type | V_CONTEXT(id)); + return t3_wait_op_done(adap, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY, + 0, SG_CONTEXT_CMD_ATTEMPTS, 1); } /** @@ -2729,10 +2760,10 @@ static void tp_config(struct adapter *adap, const struct tp_params *p) F_TCPCHECKSUMOFFLOAD | V_IPTTL(64)); t3_write_reg(adap, A_TP_TCP_OPTIONS, V_MTUDEFAULT(576) | F_MTUENABLE | V_WINDOWSCALEMODE(1) | - V_TIMESTAMPSMODE(0) | V_SACKMODE(1) | V_SACKRX(1)); + V_TIMESTAMPSMODE(1) | V_SACKMODE(1) | V_SACKRX(1)); t3_write_reg(adap, A_TP_DACK_CONFIG, V_AUTOSTATE3(1) | V_AUTOSTATE2(1) | V_AUTOSTATE1(0) | - V_BYTETHRESHOLD(16384) | V_MSSTHRESHOLD(2) | + V_BYTETHRESHOLD(26880) | V_MSSTHRESHOLD(2) | F_AUTOCAREFUL | F_AUTOENABLE | V_DACK_MODE(1)); t3_set_reg_field(adap, A_TP_IN_CONFIG, F_RXFBARBPRIO | F_TXFBARBPRIO, F_IPV6ENABLE | F_NICMODE); @@ -3196,20 +3227,22 @@ int t3_mps_set_active_ports(struct adapter *adap, unsigned int port_mask) } /* - * Perform the bits of HW initialization that are dependent on the number - * of available ports. + * Perform the bits of HW initialization that are dependent on the Tx + * channels being used. */ -static void init_hw_for_avail_ports(struct adapter *adap, int nports) +static void chan_init_hw(struct adapter *adap, unsigned int chan_map) { int i; - if (nports == 1) { + if (chan_map != 3) { /* one channel */ t3_set_reg_field(adap, A_ULPRX_CTL, F_ROUND_ROBIN, 0); t3_set_reg_field(adap, A_ULPTX_CONFIG, F_CFG_RR_ARB, 0); - t3_write_reg(adap, A_MPS_CFG, F_TPRXPORTEN | F_TPTXPORT0EN | - F_PORT0ACTIVE | F_ENFORCEPKT); - t3_write_reg(adap, A_PM1_TX_CFG, 0xffffffff); - } else { + t3_write_reg(adap, A_MPS_CFG, F_TPRXPORTEN | F_ENFORCEPKT | + (chan_map == 1 ? F_TPTXPORT0EN | F_PORT0ACTIVE : + F_TPTXPORT1EN | F_PORT1ACTIVE)); + t3_write_reg(adap, A_PM1_TX_CFG, + chan_map == 1 ? 0xffffffff : 0); + } else { /* two channels */ t3_set_reg_field(adap, A_ULPRX_CTL, 0, F_ROUND_ROBIN); t3_set_reg_field(adap, A_ULPTX_CONFIG, 0, F_CFG_RR_ARB); t3_write_reg(adap, A_ULPTX_DMA_WEIGHT, @@ -3517,7 +3550,7 @@ int t3_init_hw(struct adapter *adapter, u32 fw_params) t3_write_reg(adapter, A_PM1_RX_CFG, 0xffffffff); t3_write_reg(adapter, A_PM1_RX_MODE, 0); t3_write_reg(adapter, A_PM1_TX_MODE, 0); - init_hw_for_avail_ports(adapter, adapter->params.nports); + chan_init_hw(adapter, adapter->params.chan_map); t3_sge_init(adapter, &adapter->params.sge); t3_write_reg(adapter, A_T3DBG_GPIO_ACT_LOW, calc_gpio_intr(adapter)); @@ -3754,7 +3787,8 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai, get_pci_mode(adapter, &adapter->params.pci); adapter->params.info = ai; - adapter->params.nports = ai->nports; + adapter->params.nports = ai->nports0 + ai->nports1; + adapter->params.chan_map = !!ai->nports0 | (!!ai->nports1 << 1); adapter->params.rev = t3_read_reg(adapter, A_PL_REV); /* * We used to only run the "adapter check task" once a second if @@ -3785,7 +3819,7 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai, mc7_prep(adapter, &adapter->pmtx, MC7_PMTX_BASE_ADDR, "PMTX"); mc7_prep(adapter, &adapter->cm, MC7_CM_BASE_ADDR, "CM"); - p->nchan = ai->nports; + p->nchan = adapter->params.chan_map == 3 ? 2 : 1; p->pmrx_size = t3_mc7_size(&adapter->pmrx); p->pmtx_size = t3_mc7_size(&adapter->pmtx); p->cm_size = t3_mc7_size(&adapter->cm); diff --git a/drivers/net/depca.c b/drivers/net/depca.c index 55625dbbae5..357f565851e 100644 --- a/drivers/net/depca.c +++ b/drivers/net/depca.c @@ -566,6 +566,18 @@ MODULE_LICENSE("GPL"); outw(CSR0, DEPCA_ADDR);\ outw(STOP, DEPCA_DATA) +static const struct net_device_ops depca_netdev_ops = { + .ndo_open = depca_open, + .ndo_start_xmit = depca_start_xmit, + .ndo_stop = depca_close, + .ndo_set_multicast_list = set_multicast_list, + .ndo_do_ioctl = depca_ioctl, + .ndo_tx_timeout = depca_tx_timeout, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + static int __init depca_hw_init (struct net_device *dev, struct device *device) { struct depca_private *lp; @@ -793,12 +805,7 @@ static int __init depca_hw_init (struct net_device *dev, struct device *device) } /* The DEPCA-specific entries in the device structure. */ - dev->open = &depca_open; - dev->hard_start_xmit = &depca_start_xmit; - dev->stop = &depca_close; - dev->set_multicast_list = &set_multicast_list; - dev->do_ioctl = &depca_ioctl; - dev->tx_timeout = depca_tx_timeout; + dev->netdev_ops = &depca_netdev_ops; dev->watchdog_timeo = TX_TIMEOUT; dev->mem_start = 0; diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c index e187c88ae14..cc2ab6412c7 100644 --- a/drivers/net/eepro.c +++ b/drivers/net/eepro.c @@ -739,6 +739,17 @@ static void __init eepro_print_info (struct net_device *dev) static const struct ethtool_ops eepro_ethtool_ops; +static const struct net_device_ops eepro_netdev_ops = { + .ndo_open = eepro_open, + .ndo_stop = eepro_close, + .ndo_start_xmit = eepro_send_packet, + .ndo_set_multicast_list = set_multicast_list, + .ndo_tx_timeout = eepro_tx_timeout, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + /* This is the real probe routine. Linux has a history of friendly device probes on the ISA bus. A good device probe avoids doing writes, and verifies that the correct device exists and functions. */ @@ -851,11 +862,7 @@ static int __init eepro_probe1(struct net_device *dev, int autoprobe) } } - dev->open = eepro_open; - dev->stop = eepro_close; - dev->hard_start_xmit = eepro_send_packet; - dev->set_multicast_list = &set_multicast_list; - dev->tx_timeout = eepro_tx_timeout; + dev->netdev_ops = &eepro_netdev_ops; dev->watchdog_timeo = TX_TIMEOUT; dev->ethtool_ops = &eepro_ethtool_ops; diff --git a/drivers/net/eexpress.c b/drivers/net/eexpress.c index 9ff3f2f5e38..1686dca2874 100644 --- a/drivers/net/eexpress.c +++ b/drivers/net/eexpress.c @@ -1043,6 +1043,17 @@ static void eexp_hw_tx_pio(struct net_device *dev, unsigned short *buf, lp->last_tx = jiffies; } +static const struct net_device_ops eexp_netdev_ops = { + .ndo_open = eexp_open, + .ndo_stop = eexp_close, + .ndo_start_xmit = eexp_xmit, + .ndo_set_multicast_list = eexp_set_multicast, + .ndo_tx_timeout = eexp_timeout, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + /* * Sanity check the suspected EtherExpress card * Read hardware address, reset card, size memory and initialize buffer @@ -1163,11 +1174,7 @@ static int __init eexp_hw_probe(struct net_device *dev, unsigned short ioaddr) lp->rx_buf_start = TX_BUF_START + (lp->num_tx_bufs*TX_BUF_SIZE); lp->width = buswidth; - dev->open = eexp_open; - dev->stop = eexp_close; - dev->hard_start_xmit = eexp_xmit; - dev->set_multicast_list = &eexp_set_multicast; - dev->tx_timeout = eexp_timeout; + dev->netdev_ops = &eexp_netdev_ops; dev->watchdog_timeo = 2*HZ; return register_netdev(dev); diff --git a/drivers/net/eth16i.c b/drivers/net/eth16i.c index 5c048f2fd74..0d8b6da046f 100644 --- a/drivers/net/eth16i.c +++ b/drivers/net/eth16i.c @@ -475,6 +475,17 @@ out: } #endif +static const struct net_device_ops eth16i_netdev_ops = { + .ndo_open = eth16i_open, + .ndo_stop = eth16i_close, + .ndo_start_xmit = eth16i_tx, + .ndo_set_multicast_list = eth16i_multicast, + .ndo_tx_timeout = eth16i_timeout, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + static int __init eth16i_probe1(struct net_device *dev, int ioaddr) { struct eth16i_local *lp = netdev_priv(dev); @@ -549,12 +560,7 @@ static int __init eth16i_probe1(struct net_device *dev, int ioaddr) BITCLR(ioaddr + CONFIG_REG_1, POWERUP); /* Initialize the device structure */ - memset(lp, 0, sizeof(struct eth16i_local)); - dev->open = eth16i_open; - dev->stop = eth16i_close; - dev->hard_start_xmit = eth16i_tx; - dev->set_multicast_list = eth16i_multicast; - dev->tx_timeout = eth16i_timeout; + dev->netdev_ops = ð16i_netdev_ops; dev->watchdog_timeo = TX_TIMEOUT; spin_lock_init(&lp->lock); diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c new file mode 100644 index 00000000000..91a9b1a3376 --- /dev/null +++ b/drivers/net/ethoc.c @@ -0,0 +1,1112 @@ +/* + * linux/drivers/net/ethoc.c + * + * Copyright (C) 2007-2008 Avionic Design Development GmbH + * Copyright (C) 2008-2009 Avionic Design GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Written by Thierry Reding <thierry.reding@avionic-design.de> + */ + +#include <linux/etherdevice.h> +#include <linux/crc32.h> +#include <linux/io.h> +#include <linux/mii.h> +#include <linux/phy.h> +#include <linux/platform_device.h> +#include <net/ethoc.h> + +/* register offsets */ +#define MODER 0x00 +#define INT_SOURCE 0x04 +#define INT_MASK 0x08 +#define IPGT 0x0c +#define IPGR1 0x10 +#define IPGR2 0x14 +#define PACKETLEN 0x18 +#define COLLCONF 0x1c +#define TX_BD_NUM 0x20 +#define CTRLMODER 0x24 +#define MIIMODER 0x28 +#define MIICOMMAND 0x2c +#define MIIADDRESS 0x30 +#define MIITX_DATA 0x34 +#define MIIRX_DATA 0x38 +#define MIISTATUS 0x3c +#define MAC_ADDR0 0x40 +#define MAC_ADDR1 0x44 +#define ETH_HASH0 0x48 +#define ETH_HASH1 0x4c +#define ETH_TXCTRL 0x50 + +/* mode register */ +#define MODER_RXEN (1 << 0) /* receive enable */ +#define MODER_TXEN (1 << 1) /* transmit enable */ +#define MODER_NOPRE (1 << 2) /* no preamble */ +#define MODER_BRO (1 << 3) /* broadcast address */ +#define MODER_IAM (1 << 4) /* individual address mode */ +#define MODER_PRO (1 << 5) /* promiscuous mode */ +#define MODER_IFG (1 << 6) /* interframe gap for incoming frames */ +#define MODER_LOOP (1 << 7) /* loopback */ +#define MODER_NBO (1 << 8) /* no back-off */ +#define MODER_EDE (1 << 9) /* excess defer enable */ +#define MODER_FULLD (1 << 10) /* full duplex */ +#define MODER_RESET (1 << 11) /* FIXME: reset (undocumented) */ +#define MODER_DCRC (1 << 12) /* delayed CRC enable */ +#define MODER_CRC (1 << 13) /* CRC enable */ +#define MODER_HUGE (1 << 14) /* huge packets enable */ +#define MODER_PAD (1 << 15) /* padding enabled */ +#define MODER_RSM (1 << 16) /* receive small packets */ + +/* interrupt source and mask registers */ +#define INT_MASK_TXF (1 << 0) /* transmit frame */ +#define INT_MASK_TXE (1 << 1) /* transmit error */ +#define INT_MASK_RXF (1 << 2) /* receive frame */ +#define INT_MASK_RXE (1 << 3) /* receive error */ +#define INT_MASK_BUSY (1 << 4) +#define INT_MASK_TXC (1 << 5) /* transmit control frame */ +#define INT_MASK_RXC (1 << 6) /* receive control frame */ + +#define INT_MASK_TX (INT_MASK_TXF | INT_MASK_TXE) +#define INT_MASK_RX (INT_MASK_RXF | INT_MASK_RXE) + +#define INT_MASK_ALL ( \ + INT_MASK_TXF | INT_MASK_TXE | \ + INT_MASK_RXF | INT_MASK_RXE | \ + INT_MASK_TXC | INT_MASK_RXC | \ + INT_MASK_BUSY \ + ) + +/* packet length register */ +#define PACKETLEN_MIN(min) (((min) & 0xffff) << 16) +#define PACKETLEN_MAX(max) (((max) & 0xffff) << 0) +#define PACKETLEN_MIN_MAX(min, max) (PACKETLEN_MIN(min) | \ + PACKETLEN_MAX(max)) + +/* transmit buffer number register */ +#define TX_BD_NUM_VAL(x) (((x) <= 0x80) ? (x) : 0x80) + +/* control module mode register */ +#define CTRLMODER_PASSALL (1 << 0) /* pass all receive frames */ +#define CTRLMODER_RXFLOW (1 << 1) /* receive control flow */ +#define CTRLMODER_TXFLOW (1 << 2) /* transmit control flow */ + +/* MII mode register */ +#define MIIMODER_CLKDIV(x) ((x) & 0xfe) /* needs to be an even number */ +#define MIIMODER_NOPRE (1 << 8) /* no preamble */ + +/* MII command register */ +#define MIICOMMAND_SCAN (1 << 0) /* scan status */ +#define MIICOMMAND_READ (1 << 1) /* read status */ +#define MIICOMMAND_WRITE (1 << 2) /* write control data */ + +/* MII address register */ +#define MIIADDRESS_FIAD(x) (((x) & 0x1f) << 0) +#define MIIADDRESS_RGAD(x) (((x) & 0x1f) << 8) +#define MIIADDRESS_ADDR(phy, reg) (MIIADDRESS_FIAD(phy) | \ + MIIADDRESS_RGAD(reg)) + +/* MII transmit data register */ +#define MIITX_DATA_VAL(x) ((x) & 0xffff) + +/* MII receive data register */ +#define MIIRX_DATA_VAL(x) ((x) & 0xffff) + +/* MII status register */ +#define MIISTATUS_LINKFAIL (1 << 0) +#define MIISTATUS_BUSY (1 << 1) +#define MIISTATUS_INVALID (1 << 2) + +/* TX buffer descriptor */ +#define TX_BD_CS (1 << 0) /* carrier sense lost */ +#define TX_BD_DF (1 << 1) /* defer indication */ +#define TX_BD_LC (1 << 2) /* late collision */ +#define TX_BD_RL (1 << 3) /* retransmission limit */ +#define TX_BD_RETRY_MASK (0x00f0) +#define TX_BD_RETRY(x) (((x) & 0x00f0) >> 4) +#define TX_BD_UR (1 << 8) /* transmitter underrun */ +#define TX_BD_CRC (1 << 11) /* TX CRC enable */ +#define TX_BD_PAD (1 << 12) /* pad enable for short packets */ +#define TX_BD_WRAP (1 << 13) +#define TX_BD_IRQ (1 << 14) /* interrupt request enable */ +#define TX_BD_READY (1 << 15) /* TX buffer ready */ +#define TX_BD_LEN(x) (((x) & 0xffff) << 16) +#define TX_BD_LEN_MASK (0xffff << 16) + +#define TX_BD_STATS (TX_BD_CS | TX_BD_DF | TX_BD_LC | \ + TX_BD_RL | TX_BD_RETRY_MASK | TX_BD_UR) + +/* RX buffer descriptor */ +#define RX_BD_LC (1 << 0) /* late collision */ +#define RX_BD_CRC (1 << 1) /* RX CRC error */ +#define RX_BD_SF (1 << 2) /* short frame */ +#define RX_BD_TL (1 << 3) /* too long */ +#define RX_BD_DN (1 << 4) /* dribble nibble */ +#define RX_BD_IS (1 << 5) /* invalid symbol */ +#define RX_BD_OR (1 << 6) /* receiver overrun */ +#define RX_BD_MISS (1 << 7) +#define RX_BD_CF (1 << 8) /* control frame */ +#define RX_BD_WRAP (1 << 13) +#define RX_BD_IRQ (1 << 14) /* interrupt request enable */ +#define RX_BD_EMPTY (1 << 15) +#define RX_BD_LEN(x) (((x) & 0xffff) << 16) + +#define RX_BD_STATS (RX_BD_LC | RX_BD_CRC | RX_BD_SF | RX_BD_TL | \ + RX_BD_DN | RX_BD_IS | RX_BD_OR | RX_BD_MISS) + +#define ETHOC_BUFSIZ 1536 +#define ETHOC_ZLEN 64 +#define ETHOC_BD_BASE 0x400 +#define ETHOC_TIMEOUT (HZ / 2) +#define ETHOC_MII_TIMEOUT (1 + (HZ / 5)) + +/** + * struct ethoc - driver-private device structure + * @iobase: pointer to I/O memory region + * @membase: pointer to buffer memory region + * @num_tx: number of send buffers + * @cur_tx: last send buffer written + * @dty_tx: last buffer actually sent + * @num_rx: number of receive buffers + * @cur_rx: current receive buffer + * @netdev: pointer to network device structure + * @napi: NAPI structure + * @stats: network device statistics + * @msg_enable: device state flags + * @rx_lock: receive lock + * @lock: device lock + * @phy: attached PHY + * @mdio: MDIO bus for PHY access + * @phy_id: address of attached PHY + */ +struct ethoc { + void __iomem *iobase; + void __iomem *membase; + + unsigned int num_tx; + unsigned int cur_tx; + unsigned int dty_tx; + + unsigned int num_rx; + unsigned int cur_rx; + + struct net_device *netdev; + struct napi_struct napi; + struct net_device_stats stats; + u32 msg_enable; + + spinlock_t rx_lock; + spinlock_t lock; + + struct phy_device *phy; + struct mii_bus *mdio; + s8 phy_id; +}; + +/** + * struct ethoc_bd - buffer descriptor + * @stat: buffer statistics + * @addr: physical memory address + */ +struct ethoc_bd { + u32 stat; + u32 addr; +}; + +static u32 ethoc_read(struct ethoc *dev, loff_t offset) +{ + return ioread32(dev->iobase + offset); +} + +static void ethoc_write(struct ethoc *dev, loff_t offset, u32 data) +{ + iowrite32(data, dev->iobase + offset); +} + +static void ethoc_read_bd(struct ethoc *dev, int index, struct ethoc_bd *bd) +{ + loff_t offset = ETHOC_BD_BASE + (index * sizeof(struct ethoc_bd)); + bd->stat = ethoc_read(dev, offset + 0); + bd->addr = ethoc_read(dev, offset + 4); +} + +static void ethoc_write_bd(struct ethoc *dev, int index, + const struct ethoc_bd *bd) +{ + loff_t offset = ETHOC_BD_BASE + (index * sizeof(struct ethoc_bd)); + ethoc_write(dev, offset + 0, bd->stat); + ethoc_write(dev, offset + 4, bd->addr); +} + +static void ethoc_enable_irq(struct ethoc *dev, u32 mask) +{ + u32 imask = ethoc_read(dev, INT_MASK); + imask |= mask; + ethoc_write(dev, INT_MASK, imask); +} + +static void ethoc_disable_irq(struct ethoc *dev, u32 mask) +{ + u32 imask = ethoc_read(dev, INT_MASK); + imask &= ~mask; + ethoc_write(dev, INT_MASK, imask); +} + +static void ethoc_ack_irq(struct ethoc *dev, u32 mask) +{ + ethoc_write(dev, INT_SOURCE, mask); +} + +static void ethoc_enable_rx_and_tx(struct ethoc *dev) +{ + u32 mode = ethoc_read(dev, MODER); + mode |= MODER_RXEN | MODER_TXEN; + ethoc_write(dev, MODER, mode); +} + +static void ethoc_disable_rx_and_tx(struct ethoc *dev) +{ + u32 mode = ethoc_read(dev, MODER); + mode &= ~(MODER_RXEN | MODER_TXEN); + ethoc_write(dev, MODER, mode); +} + +static int ethoc_init_ring(struct ethoc *dev) +{ + struct ethoc_bd bd; + int i; + + dev->cur_tx = 0; + dev->dty_tx = 0; + dev->cur_rx = 0; + + /* setup transmission buffers */ + bd.addr = 0; + bd.stat = TX_BD_IRQ | TX_BD_CRC; + + for (i = 0; i < dev->num_tx; i++) { + if (i == dev->num_tx - 1) + bd.stat |= TX_BD_WRAP; + + ethoc_write_bd(dev, i, &bd); + bd.addr += ETHOC_BUFSIZ; + } + + bd.addr = dev->num_tx * ETHOC_BUFSIZ; + bd.stat = RX_BD_EMPTY | RX_BD_IRQ; + + for (i = 0; i < dev->num_rx; i++) { + if (i == dev->num_rx - 1) + bd.stat |= RX_BD_WRAP; + + ethoc_write_bd(dev, dev->num_tx + i, &bd); + bd.addr += ETHOC_BUFSIZ; + } + + return 0; +} + +static int ethoc_reset(struct ethoc *dev) +{ + u32 mode; + + /* TODO: reset controller? */ + + ethoc_disable_rx_and_tx(dev); + + /* TODO: setup registers */ + + /* enable FCS generation and automatic padding */ + mode = ethoc_read(dev, MODER); + mode |= MODER_CRC | MODER_PAD; + ethoc_write(dev, MODER, mode); + + /* set full-duplex mode */ + mode = ethoc_read(dev, MODER); + mode |= MODER_FULLD; + ethoc_write(dev, MODER, mode); + ethoc_write(dev, IPGT, 0x15); + + ethoc_ack_irq(dev, INT_MASK_ALL); + ethoc_enable_irq(dev, INT_MASK_ALL); + ethoc_enable_rx_and_tx(dev); + return 0; +} + +static unsigned int ethoc_update_rx_stats(struct ethoc *dev, + struct ethoc_bd *bd) +{ + struct net_device *netdev = dev->netdev; + unsigned int ret = 0; + + if (bd->stat & RX_BD_TL) { + dev_err(&netdev->dev, "RX: frame too long\n"); + dev->stats.rx_length_errors++; + ret++; + } + + if (bd->stat & RX_BD_SF) { + dev_err(&netdev->dev, "RX: frame too short\n"); + dev->stats.rx_length_errors++; + ret++; + } + + if (bd->stat & RX_BD_DN) { + dev_err(&netdev->dev, "RX: dribble nibble\n"); + dev->stats.rx_frame_errors++; + } + + if (bd->stat & RX_BD_CRC) { + dev_err(&netdev->dev, "RX: wrong CRC\n"); + dev->stats.rx_crc_errors++; + ret++; + } + + if (bd->stat & RX_BD_OR) { + dev_err(&netdev->dev, "RX: overrun\n"); + dev->stats.rx_over_errors++; + ret++; + } + + if (bd->stat & RX_BD_MISS) + dev->stats.rx_missed_errors++; + + if (bd->stat & RX_BD_LC) { + dev_err(&netdev->dev, "RX: late collision\n"); + dev->stats.collisions++; + ret++; + } + + return ret; +} + +static int ethoc_rx(struct net_device *dev, int limit) +{ + struct ethoc *priv = netdev_priv(dev); + int count; + + for (count = 0; count < limit; ++count) { + unsigned int entry; + struct ethoc_bd bd; + + entry = priv->num_tx + (priv->cur_rx % priv->num_rx); + ethoc_read_bd(priv, entry, &bd); + if (bd.stat & RX_BD_EMPTY) + break; + + if (ethoc_update_rx_stats(priv, &bd) == 0) { + int size = bd.stat >> 16; + struct sk_buff *skb = netdev_alloc_skb(dev, size); + if (likely(skb)) { + void *src = priv->membase + bd.addr; + memcpy_fromio(skb_put(skb, size), src, size); + skb->protocol = eth_type_trans(skb, dev); + dev->last_rx = jiffies; + priv->stats.rx_packets++; + priv->stats.rx_bytes += size; + netif_receive_skb(skb); + } else { + if (net_ratelimit()) + dev_warn(&dev->dev, "low on memory - " + "packet dropped\n"); + + priv->stats.rx_dropped++; + break; + } + } + + /* clear the buffer descriptor so it can be reused */ + bd.stat &= ~RX_BD_STATS; + bd.stat |= RX_BD_EMPTY; + ethoc_write_bd(priv, entry, &bd); + priv->cur_rx++; + } + + return count; +} + +static int ethoc_update_tx_stats(struct ethoc *dev, struct ethoc_bd *bd) +{ + struct net_device *netdev = dev->netdev; + + if (bd->stat & TX_BD_LC) { + dev_err(&netdev->dev, "TX: late collision\n"); + dev->stats.tx_window_errors++; + } + + if (bd->stat & TX_BD_RL) { + dev_err(&netdev->dev, "TX: retransmit limit\n"); + dev->stats.tx_aborted_errors++; + } + + if (bd->stat & TX_BD_UR) { + dev_err(&netdev->dev, "TX: underrun\n"); + dev->stats.tx_fifo_errors++; + } + + if (bd->stat & TX_BD_CS) { + dev_err(&netdev->dev, "TX: carrier sense lost\n"); + dev->stats.tx_carrier_errors++; + } + + if (bd->stat & TX_BD_STATS) + dev->stats.tx_errors++; + + dev->stats.collisions += (bd->stat >> 4) & 0xf; + dev->stats.tx_bytes += bd->stat >> 16; + dev->stats.tx_packets++; + return 0; +} + +static void ethoc_tx(struct net_device *dev) +{ + struct ethoc *priv = netdev_priv(dev); + + spin_lock(&priv->lock); + + while (priv->dty_tx != priv->cur_tx) { + unsigned int entry = priv->dty_tx % priv->num_tx; + struct ethoc_bd bd; + + ethoc_read_bd(priv, entry, &bd); + if (bd.stat & TX_BD_READY) + break; + + entry = (++priv->dty_tx) % priv->num_tx; + (void)ethoc_update_tx_stats(priv, &bd); + } + + if ((priv->cur_tx - priv->dty_tx) <= (priv->num_tx / 2)) + netif_wake_queue(dev); + + ethoc_ack_irq(priv, INT_MASK_TX); + spin_unlock(&priv->lock); +} + +static irqreturn_t ethoc_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *)dev_id; + struct ethoc *priv = netdev_priv(dev); + u32 pending; + + ethoc_disable_irq(priv, INT_MASK_ALL); + pending = ethoc_read(priv, INT_SOURCE); + if (unlikely(pending == 0)) { + ethoc_enable_irq(priv, INT_MASK_ALL); + return IRQ_NONE; + } + + ethoc_ack_irq(priv, INT_MASK_ALL); + + if (pending & INT_MASK_BUSY) { + dev_err(&dev->dev, "packet dropped\n"); + priv->stats.rx_dropped++; + } + + if (pending & INT_MASK_RX) { + if (napi_schedule_prep(&priv->napi)) + __napi_schedule(&priv->napi); + } else { + ethoc_enable_irq(priv, INT_MASK_RX); + } + + if (pending & INT_MASK_TX) + ethoc_tx(dev); + + ethoc_enable_irq(priv, INT_MASK_ALL & ~INT_MASK_RX); + return IRQ_HANDLED; +} + +static int ethoc_get_mac_address(struct net_device *dev, void *addr) +{ + struct ethoc *priv = netdev_priv(dev); + u8 *mac = (u8 *)addr; + u32 reg; + + reg = ethoc_read(priv, MAC_ADDR0); + mac[2] = (reg >> 24) & 0xff; + mac[3] = (reg >> 16) & 0xff; + mac[4] = (reg >> 8) & 0xff; + mac[5] = (reg >> 0) & 0xff; + + reg = ethoc_read(priv, MAC_ADDR1); + mac[0] = (reg >> 8) & 0xff; + mac[1] = (reg >> 0) & 0xff; + + return 0; +} + +static int ethoc_poll(struct napi_struct *napi, int budget) +{ + struct ethoc *priv = container_of(napi, struct ethoc, napi); + int work_done = 0; + + work_done = ethoc_rx(priv->netdev, budget); + if (work_done < budget) { + ethoc_enable_irq(priv, INT_MASK_RX); + napi_complete(napi); + } + + return work_done; +} + +static int ethoc_mdio_read(struct mii_bus *bus, int phy, int reg) +{ + unsigned long timeout = jiffies + ETHOC_MII_TIMEOUT; + struct ethoc *priv = bus->priv; + + ethoc_write(priv, MIIADDRESS, MIIADDRESS_ADDR(phy, reg)); + ethoc_write(priv, MIICOMMAND, MIICOMMAND_READ); + + while (time_before(jiffies, timeout)) { + u32 status = ethoc_read(priv, MIISTATUS); + if (!(status & MIISTATUS_BUSY)) { + u32 data = ethoc_read(priv, MIIRX_DATA); + /* reset MII command register */ + ethoc_write(priv, MIICOMMAND, 0); + return data; + } + + schedule(); + } + + return -EBUSY; +} + +static int ethoc_mdio_write(struct mii_bus *bus, int phy, int reg, u16 val) +{ + unsigned long timeout = jiffies + ETHOC_MII_TIMEOUT; + struct ethoc *priv = bus->priv; + + ethoc_write(priv, MIIADDRESS, MIIADDRESS_ADDR(phy, reg)); + ethoc_write(priv, MIITX_DATA, val); + ethoc_write(priv, MIICOMMAND, MIICOMMAND_WRITE); + + while (time_before(jiffies, timeout)) { + u32 stat = ethoc_read(priv, MIISTATUS); + if (!(stat & MIISTATUS_BUSY)) + return 0; + + schedule(); + } + + return -EBUSY; +} + +static int ethoc_mdio_reset(struct mii_bus *bus) +{ + return 0; +} + +static void ethoc_mdio_poll(struct net_device *dev) +{ +} + +static int ethoc_mdio_probe(struct net_device *dev) +{ + struct ethoc *priv = netdev_priv(dev); + struct phy_device *phy; + int i; + + for (i = 0; i < PHY_MAX_ADDR; i++) { + phy = priv->mdio->phy_map[i]; + if (phy) { + if (priv->phy_id != -1) { + /* attach to specified PHY */ + if (priv->phy_id == phy->addr) + break; + } else { + /* autoselect PHY if none was specified */ + if (phy->addr != 0) + break; + } + } + } + + if (!phy) { + dev_err(&dev->dev, "no PHY found\n"); + return -ENXIO; + } + + phy = phy_connect(dev, dev_name(&phy->dev), ðoc_mdio_poll, 0, + PHY_INTERFACE_MODE_GMII); + if (IS_ERR(phy)) { + dev_err(&dev->dev, "could not attach to PHY\n"); + return PTR_ERR(phy); + } + + priv->phy = phy; + return 0; +} + +static int ethoc_open(struct net_device *dev) +{ + struct ethoc *priv = netdev_priv(dev); + unsigned int min_tx = 2; + unsigned int num_bd; + int ret; + + ret = request_irq(dev->irq, ethoc_interrupt, IRQF_SHARED, + dev->name, dev); + if (ret) + return ret; + + /* calculate the number of TX/RX buffers */ + num_bd = (dev->mem_end - dev->mem_start + 1) / ETHOC_BUFSIZ; + priv->num_tx = min(min_tx, num_bd / 4); + priv->num_rx = num_bd - priv->num_tx; + ethoc_write(priv, TX_BD_NUM, priv->num_tx); + + ethoc_init_ring(priv); + ethoc_reset(priv); + + if (netif_queue_stopped(dev)) { + dev_dbg(&dev->dev, " resuming queue\n"); + netif_wake_queue(dev); + } else { + dev_dbg(&dev->dev, " starting queue\n"); + netif_start_queue(dev); + } + + phy_start(priv->phy); + napi_enable(&priv->napi); + + if (netif_msg_ifup(priv)) { + dev_info(&dev->dev, "I/O: %08lx Memory: %08lx-%08lx\n", + dev->base_addr, dev->mem_start, dev->mem_end); + } + + return 0; +} + +static int ethoc_stop(struct net_device *dev) +{ + struct ethoc *priv = netdev_priv(dev); + + napi_disable(&priv->napi); + + if (priv->phy) + phy_stop(priv->phy); + + ethoc_disable_rx_and_tx(priv); + free_irq(dev->irq, dev); + + if (!netif_queue_stopped(dev)) + netif_stop_queue(dev); + + return 0; +} + +static int ethoc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct ethoc *priv = netdev_priv(dev); + struct mii_ioctl_data *mdio = if_mii(ifr); + struct phy_device *phy = NULL; + + if (!netif_running(dev)) + return -EINVAL; + + if (cmd != SIOCGMIIPHY) { + if (mdio->phy_id >= PHY_MAX_ADDR) + return -ERANGE; + + phy = priv->mdio->phy_map[mdio->phy_id]; + if (!phy) + return -ENODEV; + } else { + phy = priv->phy; + } + + return phy_mii_ioctl(phy, mdio, cmd); +} + +static int ethoc_config(struct net_device *dev, struct ifmap *map) +{ + return -ENOSYS; +} + +static int ethoc_set_mac_address(struct net_device *dev, void *addr) +{ + struct ethoc *priv = netdev_priv(dev); + u8 *mac = (u8 *)addr; + + ethoc_write(priv, MAC_ADDR0, (mac[2] << 24) | (mac[3] << 16) | + (mac[4] << 8) | (mac[5] << 0)); + ethoc_write(priv, MAC_ADDR1, (mac[0] << 8) | (mac[1] << 0)); + + return 0; +} + +static void ethoc_set_multicast_list(struct net_device *dev) +{ + struct ethoc *priv = netdev_priv(dev); + u32 mode = ethoc_read(priv, MODER); + struct dev_mc_list *mc = NULL; + u32 hash[2] = { 0, 0 }; + + /* set loopback mode if requested */ + if (dev->flags & IFF_LOOPBACK) + mode |= MODER_LOOP; + else + mode &= ~MODER_LOOP; + + /* receive broadcast frames if requested */ + if (dev->flags & IFF_BROADCAST) + mode &= ~MODER_BRO; + else + mode |= MODER_BRO; + + /* enable promiscuous mode if requested */ + if (dev->flags & IFF_PROMISC) + mode |= MODER_PRO; + else + mode &= ~MODER_PRO; + + ethoc_write(priv, MODER, mode); + + /* receive multicast frames */ + if (dev->flags & IFF_ALLMULTI) { + hash[0] = 0xffffffff; + hash[1] = 0xffffffff; + } else { + for (mc = dev->mc_list; mc; mc = mc->next) { + u32 crc = ether_crc(mc->dmi_addrlen, mc->dmi_addr); + int bit = (crc >> 26) & 0x3f; + hash[bit >> 5] |= 1 << (bit & 0x1f); + } + } + + ethoc_write(priv, ETH_HASH0, hash[0]); + ethoc_write(priv, ETH_HASH1, hash[1]); +} + +static int ethoc_change_mtu(struct net_device *dev, int new_mtu) +{ + return -ENOSYS; +} + +static void ethoc_tx_timeout(struct net_device *dev) +{ + struct ethoc *priv = netdev_priv(dev); + u32 pending = ethoc_read(priv, INT_SOURCE); + if (likely(pending)) + ethoc_interrupt(dev->irq, dev); +} + +static struct net_device_stats *ethoc_stats(struct net_device *dev) +{ + struct ethoc *priv = netdev_priv(dev); + return &priv->stats; +} + +static int ethoc_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct ethoc *priv = netdev_priv(dev); + struct ethoc_bd bd; + unsigned int entry; + void *dest; + + if (unlikely(skb->len > ETHOC_BUFSIZ)) { + priv->stats.tx_errors++; + return -EMSGSIZE; + } + + entry = priv->cur_tx % priv->num_tx; + spin_lock_irq(&priv->lock); + priv->cur_tx++; + + ethoc_read_bd(priv, entry, &bd); + if (unlikely(skb->len < ETHOC_ZLEN)) + bd.stat |= TX_BD_PAD; + else + bd.stat &= ~TX_BD_PAD; + + dest = priv->membase + bd.addr; + memcpy_toio(dest, skb->data, skb->len); + + bd.stat &= ~(TX_BD_STATS | TX_BD_LEN_MASK); + bd.stat |= TX_BD_LEN(skb->len); + ethoc_write_bd(priv, entry, &bd); + + bd.stat |= TX_BD_READY; + ethoc_write_bd(priv, entry, &bd); + + if (priv->cur_tx == (priv->dty_tx + priv->num_tx)) { + dev_dbg(&dev->dev, "stopping queue\n"); + netif_stop_queue(dev); + } + + dev->trans_start = jiffies; + dev_kfree_skb(skb); + + spin_unlock_irq(&priv->lock); + return NETDEV_TX_OK; +} + +static const struct net_device_ops ethoc_netdev_ops = { + .ndo_open = ethoc_open, + .ndo_stop = ethoc_stop, + .ndo_do_ioctl = ethoc_ioctl, + .ndo_set_config = ethoc_config, + .ndo_set_mac_address = ethoc_set_mac_address, + .ndo_set_multicast_list = ethoc_set_multicast_list, + .ndo_change_mtu = ethoc_change_mtu, + .ndo_tx_timeout = ethoc_tx_timeout, + .ndo_get_stats = ethoc_stats, + .ndo_start_xmit = ethoc_start_xmit, +}; + +/** + * ethoc_probe() - initialize OpenCores ethernet MAC + * pdev: platform device + */ +static int ethoc_probe(struct platform_device *pdev) +{ + struct net_device *netdev = NULL; + struct resource *res = NULL; + struct resource *mmio = NULL; + struct resource *mem = NULL; + struct ethoc *priv = NULL; + unsigned int phy; + int ret = 0; + + /* allocate networking device */ + netdev = alloc_etherdev(sizeof(struct ethoc)); + if (!netdev) { + dev_err(&pdev->dev, "cannot allocate network device\n"); + ret = -ENOMEM; + goto out; + } + + SET_NETDEV_DEV(netdev, &pdev->dev); + platform_set_drvdata(pdev, netdev); + + /* obtain I/O memory space */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "cannot obtain I/O memory space\n"); + ret = -ENXIO; + goto free; + } + + mmio = devm_request_mem_region(&pdev->dev, res->start, + res->end - res->start + 1, res->name); + if (!res) { + dev_err(&pdev->dev, "cannot request I/O memory space\n"); + ret = -ENXIO; + goto free; + } + + netdev->base_addr = mmio->start; + + /* obtain buffer memory space */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) { + dev_err(&pdev->dev, "cannot obtain memory space\n"); + ret = -ENXIO; + goto free; + } + + mem = devm_request_mem_region(&pdev->dev, res->start, + res->end - res->start + 1, res->name); + if (!mem) { + dev_err(&pdev->dev, "cannot request memory space\n"); + ret = -ENXIO; + goto free; + } + + netdev->mem_start = mem->start; + netdev->mem_end = mem->end; + + /* obtain device IRQ number */ + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res) { + dev_err(&pdev->dev, "cannot obtain IRQ\n"); + ret = -ENXIO; + goto free; + } + + netdev->irq = res->start; + + /* setup driver-private data */ + priv = netdev_priv(netdev); + priv->netdev = netdev; + + priv->iobase = devm_ioremap_nocache(&pdev->dev, netdev->base_addr, + mmio->end - mmio->start + 1); + if (!priv->iobase) { + dev_err(&pdev->dev, "cannot remap I/O memory space\n"); + ret = -ENXIO; + goto error; + } + + priv->membase = devm_ioremap_nocache(&pdev->dev, netdev->mem_start, + mem->end - mem->start + 1); + if (!priv->membase) { + dev_err(&pdev->dev, "cannot remap memory space\n"); + ret = -ENXIO; + goto error; + } + + /* Allow the platform setup code to pass in a MAC address. */ + if (pdev->dev.platform_data) { + struct ethoc_platform_data *pdata = + (struct ethoc_platform_data *)pdev->dev.platform_data; + memcpy(netdev->dev_addr, pdata->hwaddr, IFHWADDRLEN); + priv->phy_id = pdata->phy_id; + } + + /* Check that the given MAC address is valid. If it isn't, read the + * current MAC from the controller. */ + if (!is_valid_ether_addr(netdev->dev_addr)) + ethoc_get_mac_address(netdev, netdev->dev_addr); + + /* Check the MAC again for validity, if it still isn't choose and + * program a random one. */ + if (!is_valid_ether_addr(netdev->dev_addr)) + random_ether_addr(netdev->dev_addr); + + ethoc_set_mac_address(netdev, netdev->dev_addr); + + /* register MII bus */ + priv->mdio = mdiobus_alloc(); + if (!priv->mdio) { + ret = -ENOMEM; + goto free; + } + + priv->mdio->name = "ethoc-mdio"; + snprintf(priv->mdio->id, MII_BUS_ID_SIZE, "%s-%d", + priv->mdio->name, pdev->id); + priv->mdio->read = ethoc_mdio_read; + priv->mdio->write = ethoc_mdio_write; + priv->mdio->reset = ethoc_mdio_reset; + priv->mdio->priv = priv; + + priv->mdio->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); + if (!priv->mdio->irq) { + ret = -ENOMEM; + goto free_mdio; + } + + for (phy = 0; phy < PHY_MAX_ADDR; phy++) + priv->mdio->irq[phy] = PHY_POLL; + + ret = mdiobus_register(priv->mdio); + if (ret) { + dev_err(&netdev->dev, "failed to register MDIO bus\n"); + goto free_mdio; + } + + ret = ethoc_mdio_probe(netdev); + if (ret) { + dev_err(&netdev->dev, "failed to probe MDIO bus\n"); + goto error; + } + + ether_setup(netdev); + + /* setup the net_device structure */ + netdev->netdev_ops = ðoc_netdev_ops; + netdev->watchdog_timeo = ETHOC_TIMEOUT; + netdev->features |= 0; + + /* setup NAPI */ + memset(&priv->napi, 0, sizeof(priv->napi)); + netif_napi_add(netdev, &priv->napi, ethoc_poll, 64); + + spin_lock_init(&priv->rx_lock); + spin_lock_init(&priv->lock); + + ret = register_netdev(netdev); + if (ret < 0) { + dev_err(&netdev->dev, "failed to register interface\n"); + goto error; + } + + goto out; + +error: + mdiobus_unregister(priv->mdio); +free_mdio: + kfree(priv->mdio->irq); + mdiobus_free(priv->mdio); +free: + free_netdev(netdev); +out: + return ret; +} + +/** + * ethoc_remove() - shutdown OpenCores ethernet MAC + * @pdev: platform device + */ +static int ethoc_remove(struct platform_device *pdev) +{ + struct net_device *netdev = platform_get_drvdata(pdev); + struct ethoc *priv = netdev_priv(netdev); + + platform_set_drvdata(pdev, NULL); + + if (netdev) { + phy_disconnect(priv->phy); + priv->phy = NULL; + + if (priv->mdio) { + mdiobus_unregister(priv->mdio); + kfree(priv->mdio->irq); + mdiobus_free(priv->mdio); + } + + unregister_netdev(netdev); + free_netdev(netdev); + } + + return 0; +} + +#ifdef CONFIG_PM +static int ethoc_suspend(struct platform_device *pdev, pm_message_t state) +{ + return -ENOSYS; +} + +static int ethoc_resume(struct platform_device *pdev) +{ + return -ENOSYS; +} +#else +# define ethoc_suspend NULL +# define ethoc_resume NULL +#endif + +static struct platform_driver ethoc_driver = { + .probe = ethoc_probe, + .remove = ethoc_remove, + .suspend = ethoc_suspend, + .resume = ethoc_resume, + .driver = { + .name = "ethoc", + }, +}; + +static int __init ethoc_init(void) +{ + return platform_driver_register(ðoc_driver); +} + +static void __exit ethoc_exit(void) +{ + platform_driver_unregister(ðoc_driver); +} + +module_init(ethoc_init); +module_exit(ethoc_exit); + +MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>"); +MODULE_DESCRIPTION("OpenCores Ethernet MAC driver"); +MODULE_LICENSE("GPL v2"); + diff --git a/drivers/net/ewrk3.c b/drivers/net/ewrk3.c index b852303c936..1a685a04d4b 100644 --- a/drivers/net/ewrk3.c +++ b/drivers/net/ewrk3.c @@ -388,6 +388,18 @@ static int __init ewrk3_probe1(struct net_device *dev, u_long iobase, int irq) return err; } +static const struct net_device_ops ewrk3_netdev_ops = { + .ndo_open = ewrk3_open, + .ndo_start_xmit = ewrk3_queue_pkt, + .ndo_stop = ewrk3_close, + .ndo_set_multicast_list = set_multicast_list, + .ndo_do_ioctl = ewrk3_ioctl, + .ndo_tx_timeout = ewrk3_timeout, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + static int __init ewrk3_hw_init(struct net_device *dev, u_long iobase) { @@ -603,16 +615,11 @@ ewrk3_hw_init(struct net_device *dev, u_long iobase) printk(version); } /* The EWRK3-specific entries in the device structure. */ - dev->open = ewrk3_open; - dev->hard_start_xmit = ewrk3_queue_pkt; - dev->stop = ewrk3_close; - dev->set_multicast_list = set_multicast_list; - dev->do_ioctl = ewrk3_ioctl; + dev->netdev_ops = &ewrk3_netdev_ops; if (lp->adapter_name[4] == '3') SET_ETHTOOL_OPS(dev, ðtool_ops_203); else SET_ETHTOOL_OPS(dev, ðtool_ops); - dev->tx_timeout = ewrk3_timeout; dev->watchdog_timeo = QUEUE_PKT_TIMEOUT; dev->mem_start = 0; diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 9d81e7a48db..6a38800be3f 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -1239,19 +1239,9 @@ static int gfar_enet_open(struct net_device *dev) return err; } -static inline struct txfcb *gfar_add_fcb(struct sk_buff **skbp) +static inline struct txfcb *gfar_add_fcb(struct sk_buff *skb) { - struct txfcb *fcb; - struct sk_buff *skb = *skbp; - - if (unlikely(skb_headroom(skb) < GMAC_FCB_LEN)) { - struct sk_buff *old_skb = skb; - skb = skb_realloc_headroom(old_skb, GMAC_FCB_LEN); - if (!skb) - return NULL; - dev_kfree_skb_any(old_skb); - } - fcb = (struct txfcb *)skb_push(skb, GMAC_FCB_LEN); + struct txfcb *fcb = (struct txfcb *)skb_push(skb, GMAC_FCB_LEN); cacheable_memzero(fcb, GMAC_FCB_LEN); return fcb; @@ -1320,6 +1310,22 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) base = priv->tx_bd_base; + /* make space for additional header when fcb is needed */ + if (((skb->ip_summed == CHECKSUM_PARTIAL) || + (priv->vlgrp && vlan_tx_tag_present(skb))) && + (skb_headroom(skb) < GMAC_FCB_LEN)) { + struct sk_buff *skb_new; + + skb_new = skb_realloc_headroom(skb, GMAC_FCB_LEN); + if (!skb_new) { + dev->stats.tx_errors++; + kfree_skb(skb); + return NETDEV_TX_OK; + } + kfree_skb(skb); + skb = skb_new; + } + /* total number of fragments in the SKB */ nr_frags = skb_shinfo(skb)->nr_frags; @@ -1372,20 +1378,18 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) /* Set up checksumming */ if (CHECKSUM_PARTIAL == skb->ip_summed) { - fcb = gfar_add_fcb(&skb); - if (likely(fcb != NULL)) { - lstatus |= BD_LFLAG(TXBD_TOE); - gfar_tx_checksum(skb, fcb); - } + fcb = gfar_add_fcb(skb); + lstatus |= BD_LFLAG(TXBD_TOE); + gfar_tx_checksum(skb, fcb); } if (priv->vlgrp && vlan_tx_tag_present(skb)) { - if (unlikely(NULL == fcb)) - fcb = gfar_add_fcb(&skb); - if (likely(fcb != NULL)) { + if (unlikely(NULL == fcb)) { + fcb = gfar_add_fcb(skb); lstatus |= BD_LFLAG(TXBD_TOE); - gfar_tx_vlan(skb, fcb); } + + gfar_tx_vlan(skb, fcb); } /* setup the TxBD length and buffer pointer for the first BD */ @@ -1433,7 +1437,7 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev) /* Unlock priv */ spin_unlock_irqrestore(&priv->txlock, flags); - return 0; + return NETDEV_TX_OK; } /* Stops the kernel queue, and halts the controller */ diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c index 5b5bf9f9861..c25bc0bc0b2 100644 --- a/drivers/net/ibmlana.c +++ b/drivers/net/ibmlana.c @@ -905,6 +905,17 @@ static char *ibmlana_adapter_names[] __devinitdata = { NULL }; + +static const struct net_device_ops ibmlana_netdev_ops = { + .ndo_open = ibmlana_open, + .ndo_stop = ibmlana_close, + .ndo_start_xmit = ibmlana_tx, + .ndo_set_multicast_list = ibmlana_set_multicast_list, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + static int __devinit ibmlana_init_one(struct device *kdev) { struct mca_device *mdev = to_mca_device(kdev); @@ -973,11 +984,7 @@ static int __devinit ibmlana_init_one(struct device *kdev) mca_device_set_claim(mdev, 1); /* set methods */ - - dev->open = ibmlana_open; - dev->stop = ibmlana_close; - dev->hard_start_xmit = ibmlana_tx; - dev->set_multicast_list = ibmlana_set_multicast_list; + dev->netdev_ops = &ibmlana_netdev_ops; dev->flags |= IFF_MULTICAST; /* copy out MAC address */ diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c index 6f3e7f71658..6b6548b9fda 100644 --- a/drivers/net/irda/donauboe.c +++ b/drivers/net/irda/donauboe.c @@ -1524,6 +1524,13 @@ toshoboe_close (struct pci_dev *pci_dev) free_netdev(self->netdev); } +static const struct net_device_ops toshoboe_netdev_ops = { + .ndo_open = toshoboe_net_open, + .ndo_stop = toshoboe_net_close, + .ndo_start_xmit = toshoboe_hard_xmit, + .ndo_do_ioctl = toshoboe_net_ioctl, +}; + static int toshoboe_open (struct pci_dev *pci_dev, const struct pci_device_id *pdid) { @@ -1657,10 +1664,7 @@ toshoboe_open (struct pci_dev *pci_dev, const struct pci_device_id *pdid) #endif SET_NETDEV_DEV(dev, &pci_dev->dev); - dev->hard_start_xmit = toshoboe_hard_xmit; - dev->open = toshoboe_net_open; - dev->stop = toshoboe_net_close; - dev->do_ioctl = toshoboe_net_ioctl; + dev->netdev_ops = &toshoboe_netdev_ops; err = register_netdev(dev); if (err) diff --git a/drivers/net/lance.c b/drivers/net/lance.c index d83d4010656..633808d447b 100644 --- a/drivers/net/lance.c +++ b/drivers/net/lance.c @@ -454,6 +454,18 @@ out: } #endif +static const struct net_device_ops lance_netdev_ops = { + .ndo_open = lance_open, + .ndo_start_xmit = lance_start_xmit, + .ndo_stop = lance_close, + .ndo_get_stats = lance_get_stats, + .ndo_set_multicast_list = set_multicast_list, + .ndo_tx_timeout = lance_tx_timeout, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + static int __init lance_probe1(struct net_device *dev, int ioaddr, int irq, int options) { struct lance_private *lp; @@ -714,12 +726,7 @@ static int __init lance_probe1(struct net_device *dev, int ioaddr, int irq, int printk(version); /* The LANCE-specific entries in the device structure. */ - dev->open = lance_open; - dev->hard_start_xmit = lance_start_xmit; - dev->stop = lance_close; - dev->get_stats = lance_get_stats; - dev->set_multicast_list = set_multicast_list; - dev->tx_timeout = lance_tx_timeout; + dev->netdev_ops = &lance_netdev_ops; dev->watchdog_timeo = TX_TIMEOUT; err = register_netdev(dev); diff --git a/drivers/net/lp486e.c b/drivers/net/lp486e.c index 4d1a059921c..d44bddbee37 100644 --- a/drivers/net/lp486e.c +++ b/drivers/net/lp486e.c @@ -952,6 +952,17 @@ static void print_eth(char *add) (unsigned char) add[12], (unsigned char) add[13]); } +static const struct net_device_ops i596_netdev_ops = { + .ndo_open = i596_open, + .ndo_stop = i596_close, + .ndo_start_xmit = i596_start_xmit, + .ndo_set_multicast_list = set_multicast_list, + .ndo_tx_timeout = i596_tx_timeout, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + static int __init lp486e_probe(struct net_device *dev) { struct i596_private *lp; unsigned char eth_addr[6] = { 0, 0xaa, 0, 0, 0, 0 }; @@ -1014,12 +1025,8 @@ static int __init lp486e_probe(struct net_device *dev) { printk("\n"); /* The LP486E-specific entries in the device structure. */ - dev->open = &i596_open; - dev->stop = &i596_close; - dev->hard_start_xmit = &i596_start_xmit; - dev->set_multicast_list = &set_multicast_list; + dev->netdev_ops = &i596_netdev_ops; dev->watchdog_timeo = 5*HZ; - dev->tx_timeout = i596_tx_timeout; #if 0 /* selftest reports 0x320925ae - don't know what that means */ diff --git a/drivers/net/ni52.c b/drivers/net/ni52.c index a8bcc00c330..77d44a06170 100644 --- a/drivers/net/ni52.c +++ b/drivers/net/ni52.c @@ -441,6 +441,18 @@ out: return ERR_PTR(err); } +static const struct net_device_ops ni52_netdev_ops = { + .ndo_open = ni52_open, + .ndo_stop = ni52_close, + .ndo_get_stats = ni52_get_stats, + .ndo_tx_timeout = ni52_timeout, + .ndo_start_xmit = ni52_send_packet, + .ndo_set_multicast_list = set_multicast_list, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + static int __init ni52_probe1(struct net_device *dev, int ioaddr) { int i, size, retval; @@ -561,15 +573,8 @@ static int __init ni52_probe1(struct net_device *dev, int ioaddr) printk("IRQ %d (assigned and not checked!).\n", dev->irq); } - dev->open = ni52_open; - dev->stop = ni52_close; - dev->get_stats = ni52_get_stats; - dev->tx_timeout = ni52_timeout; + dev->netdev_ops = &ni52_netdev_ops; dev->watchdog_timeo = HZ/20; - dev->hard_start_xmit = ni52_send_packet; - dev->set_multicast_list = set_multicast_list; - - dev->if_port = 0; return 0; out: diff --git a/drivers/net/ni65.c b/drivers/net/ni65.c index df5f869e8d8..6474f02bf78 100644 --- a/drivers/net/ni65.c +++ b/drivers/net/ni65.c @@ -237,7 +237,7 @@ struct priv void *tmdbounce[TMDNUM]; int tmdbouncenum; int lock,xmit_queued; - struct net_device_stats stats; + void *self; int cmdr_addr; int cardno; @@ -257,7 +257,6 @@ static void ni65_timeout(struct net_device *dev); static int ni65_close(struct net_device *dev); static int ni65_alloc_buffer(struct net_device *dev); static void ni65_free_buffer(struct priv *p); -static struct net_device_stats *ni65_get_stats(struct net_device *); static void set_multicast_list(struct net_device *dev); static int irqtab[] __initdata = { 9,12,15,5 }; /* irq config-translate */ @@ -401,6 +400,17 @@ out: return ERR_PTR(err); } +static const struct net_device_ops ni65_netdev_ops = { + .ndo_open = ni65_open, + .ndo_stop = ni65_close, + .ndo_start_xmit = ni65_send_packet, + .ndo_tx_timeout = ni65_timeout, + .ndo_set_multicast_list = set_multicast_list, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + /* * this is the real card probe .. */ @@ -549,13 +559,9 @@ static int __init ni65_probe1(struct net_device *dev,int ioaddr) } dev->base_addr = ioaddr; - dev->open = ni65_open; - dev->stop = ni65_close; - dev->hard_start_xmit = ni65_send_packet; - dev->tx_timeout = ni65_timeout; + dev->netdev_ops = &ni65_netdev_ops; dev->watchdog_timeo = HZ/2; - dev->get_stats = ni65_get_stats; - dev->set_multicast_list = set_multicast_list; + return 0; /* everything is OK */ } @@ -901,13 +907,13 @@ static irqreturn_t ni65_interrupt(int irq, void * dev_id) if(debuglevel > 1) printk(KERN_ERR "%s: general error: %04x.\n",dev->name,csr0); if(csr0 & CSR0_BABL) - p->stats.tx_errors++; + dev->stats.tx_errors++; if(csr0 & CSR0_MISS) { int i; for(i=0;i<RMDNUM;i++) printk("%02x ",p->rmdhead[i].u.s.status); printk("\n"); - p->stats.rx_errors++; + dev->stats.rx_errors++; } if(csr0 & CSR0_MERR) { if(debuglevel > 1) @@ -997,12 +1003,12 @@ static void ni65_xmit_intr(struct net_device *dev,int csr0) #endif /* checking some errors */ if(tmdp->status2 & XMIT_RTRY) - p->stats.tx_aborted_errors++; + dev->stats.tx_aborted_errors++; if(tmdp->status2 & XMIT_LCAR) - p->stats.tx_carrier_errors++; + dev->stats.tx_carrier_errors++; if(tmdp->status2 & (XMIT_BUFF | XMIT_UFLO )) { /* this stops the xmitter */ - p->stats.tx_fifo_errors++; + dev->stats.tx_fifo_errors++; if(debuglevel > 0) printk(KERN_ERR "%s: Xmit FIFO/BUFF error\n",dev->name); if(p->features & INIT_RING_BEFORE_START) { @@ -1016,12 +1022,12 @@ static void ni65_xmit_intr(struct net_device *dev,int csr0) if(debuglevel > 2) printk(KERN_ERR "%s: xmit-error: %04x %02x-%04x\n",dev->name,csr0,(int) tmdstat,(int) tmdp->status2); if(!(csr0 & CSR0_BABL)) /* don't count errors twice */ - p->stats.tx_errors++; + dev->stats.tx_errors++; tmdp->status2 = 0; } else { - p->stats.tx_bytes -= (short)(tmdp->blen); - p->stats.tx_packets++; + dev->stats.tx_bytes -= (short)(tmdp->blen); + dev->stats.tx_packets++; } #ifdef XMT_VIA_SKB @@ -1057,7 +1063,7 @@ static void ni65_recv_intr(struct net_device *dev,int csr0) if(!(rmdstat & RCV_ERR)) { if(rmdstat & RCV_START) { - p->stats.rx_length_errors++; + dev->stats.rx_length_errors++; printk(KERN_ERR "%s: recv, packet too long: %d\n",dev->name,rmdp->mlen & 0x0fff); } } @@ -1066,16 +1072,16 @@ static void ni65_recv_intr(struct net_device *dev,int csr0) printk(KERN_ERR "%s: receive-error: %04x, lance-status: %04x/%04x\n", dev->name,(int) rmdstat,csr0,(int) inw(PORT+L_DATAREG) ); if(rmdstat & RCV_FRAM) - p->stats.rx_frame_errors++; + dev->stats.rx_frame_errors++; if(rmdstat & RCV_OFLO) - p->stats.rx_over_errors++; + dev->stats.rx_over_errors++; if(rmdstat & RCV_CRC) - p->stats.rx_crc_errors++; + dev->stats.rx_crc_errors++; if(rmdstat & RCV_BUF_ERR) - p->stats.rx_fifo_errors++; + dev->stats.rx_fifo_errors++; } if(!(csr0 & CSR0_MISS)) /* don't count errors twice */ - p->stats.rx_errors++; + dev->stats.rx_errors++; } else if( (len = (rmdp->mlen & 0x0fff) - 4) >= 60) { @@ -1106,20 +1112,20 @@ static void ni65_recv_intr(struct net_device *dev,int csr0) skb_put(skb,len); skb_copy_to_linear_data(skb, (unsigned char *) p->recvbounce[p->rmdnum],len); #endif - p->stats.rx_packets++; - p->stats.rx_bytes += len; + dev->stats.rx_packets++; + dev->stats.rx_bytes += len; skb->protocol=eth_type_trans(skb,dev); netif_rx(skb); } else { printk(KERN_ERR "%s: can't alloc new sk_buff\n",dev->name); - p->stats.rx_dropped++; + dev->stats.rx_dropped++; } } else { printk(KERN_INFO "%s: received runt packet\n",dev->name); - p->stats.rx_errors++; + dev->stats.rx_errors++; } rmdp->blen = -(R_BUF_SIZE-8); rmdp->mlen = 0; @@ -1213,23 +1219,6 @@ static int ni65_send_packet(struct sk_buff *skb, struct net_device *dev) return 0; } -static struct net_device_stats *ni65_get_stats(struct net_device *dev) -{ - -#if 0 - int i; - struct priv *p = dev->ml_priv; - for(i=0;i<RMDNUM;i++) - { - struct rmd *rmdp = p->rmdhead + ((p->rmdnum + i) & (RMDNUM-1)); - printk("%02x ",rmdp->u.s.status); - } - printk("\n"); -#endif - - return &((struct priv *)dev->ml_priv)->stats; -} - static void set_multicast_list(struct net_device *dev) { if(!ni65_lance_reinit(dev)) diff --git a/drivers/net/seeq8005.c b/drivers/net/seeq8005.c index 12a8ffffeb0..ebbbe09725f 100644 --- a/drivers/net/seeq8005.c +++ b/drivers/net/seeq8005.c @@ -143,6 +143,17 @@ out: return ERR_PTR(err); } +static const struct net_device_ops seeq8005_netdev_ops = { + .ndo_open = seeq8005_open, + .ndo_stop = seeq8005_close, + .ndo_start_xmit = seeq8005_send_packet, + .ndo_tx_timeout = seeq8005_timeout, + .ndo_set_multicast_list = set_multicast_list, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + /* This is the real probe routine. Linux has a history of friendly device probes on the ISA bus. A good device probes avoids doing writes, and verifies that the correct device exists and functions. */ @@ -332,12 +343,8 @@ static int __init seeq8005_probe1(struct net_device *dev, int ioaddr) } } #endif - dev->open = seeq8005_open; - dev->stop = seeq8005_close; - dev->hard_start_xmit = seeq8005_send_packet; - dev->tx_timeout = seeq8005_timeout; + dev->netdev_ops = &seeq8005_netdev_ops; dev->watchdog_timeo = HZ/20; - dev->set_multicast_list = set_multicast_list; dev->flags &= ~IFF_MULTICAST; return 0; diff --git a/drivers/net/smc-ultra.c b/drivers/net/smc-ultra.c index 2033fee3143..0291ea098a0 100644 --- a/drivers/net/smc-ultra.c +++ b/drivers/net/smc-ultra.c @@ -142,9 +142,6 @@ static int __init do_ultra_probe(struct net_device *dev) int base_addr = dev->base_addr; int irq = dev->irq; -#ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = &ultra_poll; -#endif if (base_addr > 0x1ff) /* Check a single specified location. */ return ultra_probe1(dev, base_addr); else if (base_addr != 0) /* Don't probe at all. */ @@ -199,7 +196,7 @@ static const struct net_device_ops ultra_netdev_ops = { .ndo_set_mac_address = eth_mac_addr, .ndo_change_mtu = eth_change_mtu, #ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = ei_poll, + .ndo_poll_controller = ultra_poll, #endif }; diff --git a/drivers/net/smc-ultra32.c b/drivers/net/smc-ultra32.c index cb6c097a2e0..7a554adc70f 100644 --- a/drivers/net/smc-ultra32.c +++ b/drivers/net/smc-ultra32.c @@ -153,6 +153,22 @@ out: return ERR_PTR(err); } + +static const struct net_device_ops ultra32_netdev_ops = { + .ndo_open = ultra32_open, + .ndo_stop = ultra32_close, + .ndo_start_xmit = ei_start_xmit, + .ndo_tx_timeout = ei_tx_timeout, + .ndo_get_stats = ei_get_stats, + .ndo_set_multicast_list = ei_set_multicast_list, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, + .ndo_change_mtu = eth_change_mtu, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = ei_poll, +#endif +}; + static int __init ultra32_probe1(struct net_device *dev, int ioaddr) { int i, edge, media, retval; @@ -273,11 +289,8 @@ static int __init ultra32_probe1(struct net_device *dev, int ioaddr) ei_status.block_output = &ultra32_block_output; ei_status.get_8390_hdr = &ultra32_get_8390_hdr; ei_status.reset_8390 = &ultra32_reset_8390; - dev->open = &ultra32_open; - dev->stop = &ultra32_close; -#ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = ei_poll; -#endif + + dev->netdev_ops = &ultra32_netdev_ops; NS8390_init(dev, 0); return 0; diff --git a/drivers/net/smc9194.c b/drivers/net/smc9194.c index 18d653bbd4e..9a7973a5411 100644 --- a/drivers/net/smc9194.c +++ b/drivers/net/smc9194.c @@ -831,6 +831,17 @@ static int __init smc_findirq(int ioaddr) #endif } +static const struct net_device_ops smc_netdev_ops = { + .ndo_open = smc_open, + .ndo_stop = smc_close, + .ndo_start_xmit = smc_wait_to_send_packet, + .ndo_tx_timeout = smc_timeout, + .ndo_set_multicast_list = smc_set_multicast_list, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + /*---------------------------------------------------------------------- . Function: smc_probe( int ioaddr ) . @@ -1044,12 +1055,8 @@ static int __init smc_probe(struct net_device *dev, int ioaddr) goto err_out; } - dev->open = smc_open; - dev->stop = smc_close; - dev->hard_start_xmit = smc_wait_to_send_packet; - dev->tx_timeout = smc_timeout; + dev->netdev_ops = &smc_netdev_ops; dev->watchdog_timeo = HZ/20; - dev->set_multicast_list = smc_set_multicast_list; return 0; diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index ad3cbc91a8f..af8f60ca0f5 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -1680,6 +1680,7 @@ static int smsc911x_eeprom_write_location(struct smsc911x_data *pdata, u8 address, u8 data) { u32 op = E2P_CMD_EPC_CMD_ERASE_ | address; + u32 temp; int ret; SMSC_TRACE(DRV, "address 0x%x, data 0x%x", address, data); @@ -1688,6 +1689,10 @@ static int smsc911x_eeprom_write_location(struct smsc911x_data *pdata, if (!ret) { op = E2P_CMD_EPC_CMD_WRITE_ | address; smsc911x_reg_write(pdata, E2P_DATA, (u32)data); + + /* Workaround for hardware read-after-write restriction */ + temp = smsc911x_reg_read(pdata, BYTE_TEST); + ret = smsc911x_eeprom_send_cmd(pdata, op); } diff --git a/drivers/net/tokenring/madgemc.c b/drivers/net/tokenring/madgemc.c index 193308118f9..456f8bff40b 100644 --- a/drivers/net/tokenring/madgemc.c +++ b/drivers/net/tokenring/madgemc.c @@ -142,7 +142,7 @@ static void madgemc_sifwritew(struct net_device *dev, unsigned short val, unsign return; } - +static struct net_device_ops madgemc_netdev_ops __read_mostly; static int __devinit madgemc_probe(struct device *device) { @@ -168,7 +168,7 @@ static int __devinit madgemc_probe(struct device *device) goto getout; } - dev->dma = 0; + dev->netdev_ops = &madgemc_netdev_ops; card = kmalloc(sizeof(struct card_info), GFP_KERNEL); if (card==NULL) { @@ -348,9 +348,6 @@ static int __devinit madgemc_probe(struct device *device) memcpy(tp->ProductID, "Madge MCA 16/4 ", PROD_ID_SIZE + 1); - dev->open = madgemc_open; - dev->stop = madgemc_close; - tp->tmspriv = card; dev_set_drvdata(device, dev); @@ -758,6 +755,10 @@ static struct mca_driver madgemc_driver = { static int __init madgemc_init (void) { + madgemc_netdev_ops = tms380tr_netdev_ops; + madgemc_netdev_ops.ndo_open = madgemc_open; + madgemc_netdev_ops.ndo_stop = madgemc_close; + return mca_register_driver (&madgemc_driver); } diff --git a/drivers/net/tokenring/proteon.c b/drivers/net/tokenring/proteon.c index b8c955f6d31..16e8783ee9c 100644 --- a/drivers/net/tokenring/proteon.c +++ b/drivers/net/tokenring/proteon.c @@ -116,6 +116,8 @@ nodev: return -ENODEV; } +static struct net_device_ops proteon_netdev_ops __read_mostly; + static int __init setup_card(struct net_device *dev, struct device *pdev) { struct net_local *tp; @@ -167,8 +169,7 @@ static int __init setup_card(struct net_device *dev, struct device *pdev) tp->tmspriv = NULL; - dev->open = proteon_open; - dev->stop = tms380tr_close; + dev->netdev_ops = &proteon_netdev_ops; if (dev->irq == 0) { @@ -352,6 +353,10 @@ static int __init proteon_init(void) struct platform_device *pdev; int i, num = 0, err = 0; + proteon_netdev_ops = tms380tr_netdev_ops; + proteon_netdev_ops.ndo_open = proteon_open; + proteon_netdev_ops.ndo_stop = tms380tr_close; + err = platform_driver_register(&proteon_driver); if (err) return err; diff --git a/drivers/net/tokenring/skisa.c b/drivers/net/tokenring/skisa.c index c0f58f08782..46db5c5395b 100644 --- a/drivers/net/tokenring/skisa.c +++ b/drivers/net/tokenring/skisa.c @@ -133,6 +133,8 @@ static int __init sk_isa_probe1(struct net_device *dev, int ioaddr) return 0; } +static struct net_device_ops sk_isa_netdev_ops __read_mostly; + static int __init setup_card(struct net_device *dev, struct device *pdev) { struct net_local *tp; @@ -184,8 +186,7 @@ static int __init setup_card(struct net_device *dev, struct device *pdev) tp->tmspriv = NULL; - dev->open = sk_isa_open; - dev->stop = tms380tr_close; + dev->netdev_ops = &sk_isa_netdev_ops; if (dev->irq == 0) { @@ -362,6 +363,10 @@ static int __init sk_isa_init(void) struct platform_device *pdev; int i, num = 0, err = 0; + sk_isa_netdev_ops = tms380tr_netdev_ops; + sk_isa_netdev_ops.ndo_open = sk_isa_open; + sk_isa_netdev_ops.ndo_stop = tms380tr_close; + err = platform_driver_register(&sk_isa_driver); if (err) return err; diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c index 9d7db2c8d66..a91d9c55d78 100644 --- a/drivers/net/tokenring/smctr.c +++ b/drivers/net/tokenring/smctr.c @@ -124,7 +124,6 @@ static unsigned int smctr_get_num_rx_bdbs(struct net_device *dev); static int smctr_get_physical_drop_number(struct net_device *dev); static __u8 *smctr_get_rx_pointer(struct net_device *dev, short queue); static int smctr_get_station_id(struct net_device *dev); -static struct net_device_stats *smctr_get_stats(struct net_device *dev); static FCBlock *smctr_get_tx_fcb(struct net_device *dev, __u16 queue, __u16 bytes_count); static int smctr_get_upstream_neighbor_addr(struct net_device *dev); @@ -3633,6 +3632,14 @@ out: return ERR_PTR(err); } +static const struct net_device_ops smctr_netdev_ops = { + .ndo_open = smctr_open, + .ndo_stop = smctr_close, + .ndo_start_xmit = smctr_send_packet, + .ndo_tx_timeout = smctr_timeout, + .ndo_get_stats = smctr_get_stats, + .ndo_set_multicast_list = smctr_set_multicast_list, +}; static int __init smctr_probe1(struct net_device *dev, int ioaddr) { @@ -3683,13 +3690,8 @@ static int __init smctr_probe1(struct net_device *dev, int ioaddr) (unsigned int)dev->base_addr, dev->irq, tp->rom_base, tp->ram_base); - dev->open = smctr_open; - dev->stop = smctr_close; - dev->hard_start_xmit = smctr_send_packet; - dev->tx_timeout = smctr_timeout; + dev->netdev_ops = &smctr_netdev_ops; dev->watchdog_timeo = HZ; - dev->get_stats = smctr_get_stats; - dev->set_multicast_list = &smctr_set_multicast_list; return (0); out: diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index a110326dce6..86a479f61c0 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -2009,6 +2009,9 @@ static void ucc_geth_stop(struct ucc_geth_private *ugeth) /* Disable Rx and Tx */ clrbits32(&ug_regs->maccfg1, MACCFG1_ENABLE_RX | MACCFG1_ENABLE_TX); + phy_disconnect(ugeth->phydev); + ugeth->phydev = NULL; + ucc_geth_memclean(ugeth); } @@ -3345,6 +3348,14 @@ static int ucc_geth_open(struct net_device *dev) return -EINVAL; } + err = init_phy(dev); + if (err) { + if (netif_msg_ifup(ugeth)) + ugeth_err("%s: Cannot initialize PHY, aborting.", + dev->name); + return err; + } + err = ucc_struct_init(ugeth); if (err) { if (netif_msg_ifup(ugeth)) @@ -3381,13 +3392,6 @@ static int ucc_geth_open(struct net_device *dev) &ugeth->ug_regs->macstnaddr1, &ugeth->ug_regs->macstnaddr2); - err = init_phy(dev); - if (err) { - if (netif_msg_ifup(ugeth)) - ugeth_err("%s: Cannot initialize PHY, aborting.", dev->name); - goto out_err; - } - phy_start(ugeth->phydev); err = ugeth_enable(ugeth, COMM_DIR_RX_AND_TX); @@ -3430,9 +3434,6 @@ static int ucc_geth_close(struct net_device *dev) free_irq(ugeth->ug_info->uf_info.irq, ugeth->dev); - phy_disconnect(ugeth->phydev); - ugeth->phydev = NULL; - netif_stop_queue(dev); return 0; diff --git a/drivers/net/wan/sdla.c b/drivers/net/wan/sdla.c index 6a07ba9371d..1d637f407a0 100644 --- a/drivers/net/wan/sdla.c +++ b/drivers/net/wan/sdla.c @@ -714,19 +714,19 @@ static int sdla_transmit(struct sk_buff *skb, struct net_device *dev) switch (ret) { case SDLA_RET_OK: - flp->stats.tx_packets++; + dev->stats.tx_packets++; ret = DLCI_RET_OK; break; case SDLA_RET_CIR_OVERFLOW: case SDLA_RET_BUF_OVERSIZE: case SDLA_RET_NO_BUFS: - flp->stats.tx_dropped++; + dev->stats.tx_dropped++; ret = DLCI_RET_DROP; break; default: - flp->stats.tx_errors++; + dev->stats.tx_errors++; ret = DLCI_RET_ERR; break; } @@ -807,7 +807,7 @@ static void sdla_receive(struct net_device *dev) if (i == CONFIG_DLCI_MAX) { printk(KERN_NOTICE "%s: Received packet from invalid DLCI %i, ignoring.", dev->name, dlci); - flp->stats.rx_errors++; + dev->stats.rx_errors++; success = 0; } } @@ -819,7 +819,7 @@ static void sdla_receive(struct net_device *dev) if (skb == NULL) { printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name); - flp->stats.rx_dropped++; + dev->stats.rx_dropped++; success = 0; } else @@ -859,7 +859,7 @@ static void sdla_receive(struct net_device *dev) if (success) { - flp->stats.rx_packets++; + dev->stats.rx_packets++; dlp = netdev_priv(master); (*dlp->receive)(skb, master); } @@ -1590,13 +1590,14 @@ fail: return err; } -static struct net_device_stats *sdla_stats(struct net_device *dev) -{ - struct frad_local *flp; - flp = netdev_priv(dev); - - return(&flp->stats); -} +static const struct net_device_ops sdla_netdev_ops = { + .ndo_open = sdla_open, + .ndo_stop = sdla_close, + .ndo_do_ioctl = sdla_ioctl, + .ndo_set_config = sdla_set_config, + .ndo_start_xmit = sdla_transmit, + .ndo_change_mtu = sdla_change_mtu, +}; static void setup_sdla(struct net_device *dev) { @@ -1604,20 +1605,13 @@ static void setup_sdla(struct net_device *dev) netdev_boot_setup_check(dev); + dev->netdev_ops = &sdla_netdev_ops; dev->flags = 0; dev->type = 0xFFFF; dev->hard_header_len = 0; dev->addr_len = 0; dev->mtu = SDLA_MAX_MTU; - dev->open = sdla_open; - dev->stop = sdla_close; - dev->do_ioctl = sdla_ioctl; - dev->set_config = sdla_set_config; - dev->get_stats = sdla_stats; - dev->hard_start_xmit = sdla_transmit; - dev->change_mtu = sdla_change_mtu; - flp->activate = sdla_activate; flp->deactivate = sdla_deactivate; flp->assoc = sdla_assoc; diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 612fffe100a..8a0823588c5 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -485,6 +485,7 @@ config MWL8K source "drivers/net/wireless/p54/Kconfig" source "drivers/net/wireless/ath5k/Kconfig" source "drivers/net/wireless/ath9k/Kconfig" +source "drivers/net/wireless/ar9170/Kconfig" source "drivers/net/wireless/ipw2x00/Kconfig" source "drivers/net/wireless/iwlwifi/Kconfig" source "drivers/net/wireless/hostap/Kconfig" diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile index d780487c420..50e7fba7f0e 100644 --- a/drivers/net/wireless/Makefile +++ b/drivers/net/wireless/Makefile @@ -57,5 +57,6 @@ obj-$(CONFIG_P54_COMMON) += p54/ obj-$(CONFIG_ATH5K) += ath5k/ obj-$(CONFIG_ATH9K) += ath9k/ +obj-$(CONFIG_AR9170_USB) += ar9170/ obj-$(CONFIG_MAC80211_HWSIM) += mac80211_hwsim.o diff --git a/drivers/net/wireless/ar9170/Kconfig b/drivers/net/wireless/ar9170/Kconfig new file mode 100644 index 00000000000..de4281fda12 --- /dev/null +++ b/drivers/net/wireless/ar9170/Kconfig @@ -0,0 +1,17 @@ +config AR9170_USB + tristate "Atheros AR9170 802.11n USB support" + depends on USB && MAC80211 && WLAN_80211 && EXPERIMENTAL + select FW_LOADER + help + This is a driver for the Atheros "otus" 802.11n USB devices. + + These devices require additional firmware (2 files). + For now, these files can be downloaded from here: + http://wireless.kernel.org/en/users/Drivers/ar9170 + + If you choose to build a module, it'll be called ar9170usb. + +config AR9170_LEDS + bool + depends on AR9170_USB && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = AR9170_USB) + default y diff --git a/drivers/net/wireless/ar9170/Makefile b/drivers/net/wireless/ar9170/Makefile new file mode 100644 index 00000000000..8d91c7ee321 --- /dev/null +++ b/drivers/net/wireless/ar9170/Makefile @@ -0,0 +1,3 @@ +ar9170usb-objs := usb.o main.o cmd.o mac.o phy.o led.o + +obj-$(CONFIG_AR9170_USB) += ar9170usb.o diff --git a/drivers/net/wireless/ar9170/ar9170.h b/drivers/net/wireless/ar9170/ar9170.h new file mode 100644 index 00000000000..f4fb2e94aea --- /dev/null +++ b/drivers/net/wireless/ar9170/ar9170.h @@ -0,0 +1,209 @@ +/* + * Atheros AR9170 driver + * + * Driver specific definitions + * + * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, see + * http://www.gnu.org/licenses/. + * + * This file incorporates work covered by the following copyright and + * permission notice: + * Copyright (c) 2007-2008 Atheros Communications, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +#ifndef __AR9170_H +#define __AR9170_H + +#include <linux/completion.h> +#include <linux/spinlock.h> +#include <net/wireless.h> +#include <net/mac80211.h> +#ifdef CONFIG_AR9170_LEDS +#include <linux/leds.h> +#endif /* CONFIG_AR9170_LEDS */ +#include "eeprom.h" +#include "hw.h" + +#define PAYLOAD_MAX (AR9170_MAX_CMD_LEN/4 - 1) + +enum ar9170_bw { + AR9170_BW_20, + AR9170_BW_40_BELOW, + AR9170_BW_40_ABOVE, + + __AR9170_NUM_BW, +}; + +enum ar9170_rf_init_mode { + AR9170_RFI_NONE, + AR9170_RFI_WARM, + AR9170_RFI_COLD, +}; + +#define AR9170_MAX_RX_BUFFER_SIZE 8192 + +#ifdef CONFIG_AR9170_LEDS +struct ar9170; + +struct ar9170_led { + struct ar9170 *ar; + struct led_classdev l; + char name[32]; + unsigned int toggled; + bool registered; +}; + +#endif /* CONFIG_AR9170_LEDS */ + +enum ar9170_device_state { + AR9170_UNKNOWN_STATE, + AR9170_STOPPED, + AR9170_IDLE, + AR9170_STARTED, + AR9170_ASSOCIATED, +}; + +struct ar9170 { + struct ieee80211_hw *hw; + struct mutex mutex; + enum ar9170_device_state state; + + int (*open)(struct ar9170 *); + void (*stop)(struct ar9170 *); + int (*tx)(struct ar9170 *, struct sk_buff *, bool, unsigned int); + int (*exec_cmd)(struct ar9170 *, enum ar9170_cmd, u32 , + void *, u32 , void *); + void (*callback_cmd)(struct ar9170 *, u32 , void *); + + /* interface mode settings */ + struct ieee80211_vif *vif; + u8 mac_addr[ETH_ALEN]; + u8 bssid[ETH_ALEN]; + + /* beaconing */ + struct sk_buff *beacon; + struct work_struct beacon_work; + + /* cryptographic engine */ + u64 usedkeys; + bool rx_software_decryption; + bool disable_offload; + + /* filter settings */ + struct work_struct filter_config_work; + u64 cur_mc_hash, want_mc_hash; + u32 cur_filter, want_filter; + unsigned int filter_changed; + bool sniffer_enabled; + + /* PHY */ + struct ieee80211_channel *channel; + int noise[4]; + + /* power calibration data */ + u8 power_5G_leg[4]; + u8 power_2G_cck[4]; + u8 power_2G_ofdm[4]; + u8 power_5G_ht20[8]; + u8 power_5G_ht40[8]; + u8 power_2G_ht20[8]; + u8 power_2G_ht40[8]; + +#ifdef CONFIG_AR9170_LEDS + struct delayed_work led_work; + struct ar9170_led leds[AR9170_NUM_LEDS]; +#endif /* CONFIG_AR9170_LEDS */ + + /* qos queue settings */ + spinlock_t tx_stats_lock; + struct ieee80211_tx_queue_stats tx_stats[5]; + struct ieee80211_tx_queue_params edcf[5]; + + spinlock_t cmdlock; + __le32 cmdbuf[PAYLOAD_MAX + 1]; + + /* MAC statistics */ + struct ieee80211_low_level_stats stats; + + /* EEPROM */ + struct ar9170_eeprom eeprom; + + /* global tx status for unregistered Stations. */ + struct sk_buff_head global_tx_status; + struct sk_buff_head global_tx_status_waste; + struct delayed_work tx_status_janitor; +}; + +struct ar9170_sta_info { + struct sk_buff_head tx_status[__AR9170_NUM_TXQ]; +}; + +#define IS_STARTED(a) (a->state >= AR9170_STARTED) +#define IS_ACCEPTING_CMD(a) (a->state >= AR9170_IDLE) + +#define AR9170_FILTER_CHANGED_PROMISC BIT(0) +#define AR9170_FILTER_CHANGED_MULTICAST BIT(1) +#define AR9170_FILTER_CHANGED_FRAMEFILTER BIT(2) + +/* exported interface */ +void *ar9170_alloc(size_t priv_size); +int ar9170_register(struct ar9170 *ar, struct device *pdev); +void ar9170_rx(struct ar9170 *ar, struct sk_buff *skb); +void ar9170_unregister(struct ar9170 *ar); +void ar9170_handle_tx_status(struct ar9170 *ar, struct sk_buff *skb, + bool update_statistics, u16 tx_status); + +/* MAC */ +int ar9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb); +int ar9170_init_mac(struct ar9170 *ar); +int ar9170_set_qos(struct ar9170 *ar); +int ar9170_update_multicast(struct ar9170 *ar); +int ar9170_update_frame_filter(struct ar9170 *ar); +int ar9170_set_operating_mode(struct ar9170 *ar); +int ar9170_set_beacon_timers(struct ar9170 *ar); +int ar9170_set_hwretry_limit(struct ar9170 *ar, u32 max_retry); +int ar9170_update_beacon(struct ar9170 *ar); +void ar9170_new_beacon(struct work_struct *work); +int ar9170_upload_key(struct ar9170 *ar, u8 id, const u8 *mac, u8 ktype, + u8 keyidx, u8 *keydata, int keylen); +int ar9170_disable_key(struct ar9170 *ar, u8 id); + +/* LEDs */ +#ifdef CONFIG_AR9170_LEDS +int ar9170_register_leds(struct ar9170 *ar); +void ar9170_unregister_leds(struct ar9170 *ar); +#endif /* CONFIG_AR9170_LEDS */ +int ar9170_init_leds(struct ar9170 *ar); +int ar9170_set_leds_state(struct ar9170 *ar, u32 led_state); + +/* PHY / RF */ +int ar9170_init_phy(struct ar9170 *ar, enum ieee80211_band band); +int ar9170_init_rf(struct ar9170 *ar); +int ar9170_set_channel(struct ar9170 *ar, struct ieee80211_channel *channel, + enum ar9170_rf_init_mode rfi, enum ar9170_bw bw); + +#endif /* __AR9170_H */ diff --git a/drivers/net/wireless/ar9170/cmd.c b/drivers/net/wireless/ar9170/cmd.c new file mode 100644 index 00000000000..f57a6200167 --- /dev/null +++ b/drivers/net/wireless/ar9170/cmd.c @@ -0,0 +1,129 @@ +/* + * Atheros AR9170 driver + * + * Basic HW register/memory/command access functions + * + * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, see + * http://www.gnu.org/licenses/. + * + * This file incorporates work covered by the following copyright and + * permission notice: + * Copyright (c) 2007-2008 Atheros Communications, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include "ar9170.h" +#include "cmd.h" + +int ar9170_write_mem(struct ar9170 *ar, const __le32 *data, size_t len) +{ + int err; + + if (unlikely(!IS_ACCEPTING_CMD(ar))) + return 0; + + err = ar->exec_cmd(ar, AR9170_CMD_WMEM, len, (u8 *) data, 0, NULL); + if (err) + printk(KERN_DEBUG "%s: writing memory failed\n", + wiphy_name(ar->hw->wiphy)); + return err; +} + +int ar9170_write_reg(struct ar9170 *ar, const u32 reg, const u32 val) +{ + __le32 buf[2] = { + cpu_to_le32(reg), + cpu_to_le32(val), + }; + int err; + + if (unlikely(!IS_ACCEPTING_CMD(ar))) + return 0; + + err = ar->exec_cmd(ar, AR9170_CMD_WREG, sizeof(buf), + (u8 *) buf, 0, NULL); + if (err) + printk(KERN_DEBUG "%s: writing reg %#x (val %#x) failed\n", + wiphy_name(ar->hw->wiphy), reg, val); + return err; +} + +static int ar9170_read_mreg(struct ar9170 *ar, int nregs, + const u32 *regs, u32 *out) +{ + int i, err; + __le32 *offs, *res; + + if (unlikely(!IS_ACCEPTING_CMD(ar))) + return 0; + + /* abuse "out" for the register offsets, must be same length */ + offs = (__le32 *)out; + for (i = 0; i < nregs; i++) + offs[i] = cpu_to_le32(regs[i]); + + /* also use the same buffer for the input */ + res = (__le32 *)out; + + err = ar->exec_cmd(ar, AR9170_CMD_RREG, + 4 * nregs, (u8 *)offs, + 4 * nregs, (u8 *)res); + if (err) + return err; + + /* convert result to cpu endian */ + for (i = 0; i < nregs; i++) + out[i] = le32_to_cpu(res[i]); + + return 0; +} + +int ar9170_read_reg(struct ar9170 *ar, u32 reg, u32 *val) +{ + return ar9170_read_mreg(ar, 1, ®, val); +} + +int ar9170_echo_test(struct ar9170 *ar, u32 v) +{ + __le32 echobuf = cpu_to_le32(v); + __le32 echores; + int err; + + if (unlikely(!IS_ACCEPTING_CMD(ar))) + return -ENODEV; + + err = ar->exec_cmd(ar, AR9170_CMD_ECHO, + 4, (u8 *)&echobuf, + 4, (u8 *)&echores); + if (err) + return err; + + if (echobuf != echores) + return -EINVAL; + + return 0; +} diff --git a/drivers/net/wireless/ar9170/cmd.h b/drivers/net/wireless/ar9170/cmd.h new file mode 100644 index 00000000000..a4f0e50e52b --- /dev/null +++ b/drivers/net/wireless/ar9170/cmd.h @@ -0,0 +1,91 @@ +/* + * Atheros AR9170 driver + * + * Basic HW register/memory/command access functions + * + * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, see + * http://www.gnu.org/licenses/. + * + * This file incorporates work covered by the following copyright and + * permission notice: + * Copyright (c) 2007-2008 Atheros Communications, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +#ifndef __CMD_H +#define __CMD_H + +#include "ar9170.h" + +/* basic HW access */ +int ar9170_write_mem(struct ar9170 *ar, const __le32 *data, size_t len); +int ar9170_write_reg(struct ar9170 *ar, const u32 reg, const u32 val); +int ar9170_read_reg(struct ar9170 *ar, u32 reg, u32 *val); +int ar9170_echo_test(struct ar9170 *ar, u32 v); + +/* + * Macros to facilitate writing multiple registers in a single + * write-combining USB command. Note that when the first group + * fails the whole thing will fail without any others attempted, + * but you won't know which write in the group failed. + */ +#define ar9170_regwrite_begin(ar) \ +do { \ + int __nreg = 0, __err = 0; \ + struct ar9170 *__ar = ar; + +#define ar9170_regwrite(r, v) do { \ + __ar->cmdbuf[2 * __nreg + 1] = cpu_to_le32(r); \ + __ar->cmdbuf[2 * __nreg + 2] = cpu_to_le32(v); \ + __nreg++; \ + if ((__nreg >= PAYLOAD_MAX/2)) { \ + if (IS_ACCEPTING_CMD(__ar)) \ + __err = ar->exec_cmd(__ar, AR9170_CMD_WREG, \ + 8 * __nreg, \ + (u8 *) &__ar->cmdbuf[1], \ + 0, NULL); \ + __nreg = 0; \ + if (__err) \ + goto __regwrite_out; \ + } \ +} while (0) + +#define ar9170_regwrite_finish() \ +__regwrite_out : \ + if (__nreg) { \ + if (IS_ACCEPTING_CMD(__ar)) \ + __err = ar->exec_cmd(__ar, AR9170_CMD_WREG, \ + 8 * __nreg, \ + (u8 *) &__ar->cmdbuf[1], \ + 0, NULL); \ + __nreg = 0; \ + } + +#define ar9170_regwrite_result() \ + __err; \ +} while (0); + +#endif /* __CMD_H */ diff --git a/drivers/net/wireless/ar9170/eeprom.h b/drivers/net/wireless/ar9170/eeprom.h new file mode 100644 index 00000000000..d2c8cc83f1d --- /dev/null +++ b/drivers/net/wireless/ar9170/eeprom.h @@ -0,0 +1,179 @@ +/* + * Atheros AR9170 driver + * + * EEPROM layout + * + * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, see + * http://www.gnu.org/licenses/. + * + * This file incorporates work covered by the following copyright and + * permission notice: + * Copyright (c) 2007-2008 Atheros Communications, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +#ifndef __AR9170_EEPROM_H +#define __AR9170_EEPROM_H + +#define AR5416_MAX_CHAINS 2 +#define AR5416_MODAL_SPURS 5 + +struct ar9170_eeprom_modal { + __le32 antCtrlChain[AR5416_MAX_CHAINS]; + __le32 antCtrlCommon; + s8 antennaGainCh[AR5416_MAX_CHAINS]; + u8 switchSettling; + u8 txRxAttenCh[AR5416_MAX_CHAINS]; + u8 rxTxMarginCh[AR5416_MAX_CHAINS]; + s8 adcDesiredSize; + s8 pgaDesiredSize; + u8 xlnaGainCh[AR5416_MAX_CHAINS]; + u8 txEndToXpaOff; + u8 txEndToRxOn; + u8 txFrameToXpaOn; + u8 thresh62; + s8 noiseFloorThreshCh[AR5416_MAX_CHAINS]; + u8 xpdGain; + u8 xpd; + s8 iqCalICh[AR5416_MAX_CHAINS]; + s8 iqCalQCh[AR5416_MAX_CHAINS]; + u8 pdGainOverlap; + u8 ob; + u8 db; + u8 xpaBiasLvl; + u8 pwrDecreaseFor2Chain; + u8 pwrDecreaseFor3Chain; + u8 txFrameToDataStart; + u8 txFrameToPaOn; + u8 ht40PowerIncForPdadc; + u8 bswAtten[AR5416_MAX_CHAINS]; + u8 bswMargin[AR5416_MAX_CHAINS]; + u8 swSettleHt40; + u8 reserved[22]; + struct spur_channel { + __le16 spurChan; + u8 spurRangeLow; + u8 spurRangeHigh; + } __packed spur_channels[AR5416_MODAL_SPURS]; +} __packed; + +#define AR5416_NUM_PD_GAINS 4 +#define AR5416_PD_GAIN_ICEPTS 5 + +struct ar9170_calibration_data_per_freq { + u8 pwr_pdg[AR5416_NUM_PD_GAINS][AR5416_PD_GAIN_ICEPTS]; + u8 vpd_pdg[AR5416_NUM_PD_GAINS][AR5416_PD_GAIN_ICEPTS]; +} __packed; + +#define AR5416_NUM_5G_CAL_PIERS 8 +#define AR5416_NUM_2G_CAL_PIERS 4 + +#define AR5416_NUM_5G_TARGET_PWRS 8 +#define AR5416_NUM_2G_CCK_TARGET_PWRS 3 +#define AR5416_NUM_2G_OFDM_TARGET_PWRS 4 +#define AR5416_MAX_NUM_TGT_PWRS 8 + +struct ar9170_calibration_target_power_legacy { + u8 freq; + u8 power[4]; +} __packed; + +struct ar9170_calibration_target_power_ht { + u8 freq; + u8 power[8]; +} __packed; + +#define AR5416_NUM_CTLS 24 + +struct ar9170_calctl_edges { + u8 channel; +#define AR9170_CALCTL_EDGE_FLAGS 0xC0 + u8 power_flags; +} __packed; + +#define AR5416_NUM_BAND_EDGES 8 + +struct ar9170_calctl_data { + struct ar9170_calctl_edges + control_edges[AR5416_MAX_CHAINS][AR5416_NUM_BAND_EDGES]; +} __packed; + + +struct ar9170_eeprom { + __le16 length; + __le16 checksum; + __le16 version; + u8 operating_flags; +#define AR9170_OPFLAG_5GHZ 1 +#define AR9170_OPFLAG_2GHZ 2 + u8 misc; + __le16 reg_domain[2]; + u8 mac_address[6]; + u8 rx_mask; + u8 tx_mask; + __le16 rf_silent; + __le16 bluetooth_options; + __le16 device_capabilities; + __le32 build_number; + u8 deviceType; + u8 reserved[33]; + + u8 customer_data[64]; + + struct ar9170_eeprom_modal + modal_header[2]; + + u8 cal_freq_pier_5G[AR5416_NUM_5G_CAL_PIERS]; + u8 cal_freq_pier_2G[AR5416_NUM_2G_CAL_PIERS]; + + struct ar9170_calibration_data_per_freq + cal_pier_data_5G[AR5416_MAX_CHAINS][AR5416_NUM_5G_CAL_PIERS], + cal_pier_data_2G[AR5416_MAX_CHAINS][AR5416_NUM_2G_CAL_PIERS]; + + /* power calibration data */ + struct ar9170_calibration_target_power_legacy + cal_tgt_pwr_5G[AR5416_NUM_5G_TARGET_PWRS]; + struct ar9170_calibration_target_power_ht + cal_tgt_pwr_5G_ht20[AR5416_NUM_5G_TARGET_PWRS], + cal_tgt_pwr_5G_ht40[AR5416_NUM_5G_TARGET_PWRS]; + + struct ar9170_calibration_target_power_legacy + cal_tgt_pwr_2G_cck[AR5416_NUM_2G_CCK_TARGET_PWRS], + cal_tgt_pwr_2G_ofdm[AR5416_NUM_2G_OFDM_TARGET_PWRS]; + struct ar9170_calibration_target_power_ht + cal_tgt_pwr_2G_ht20[AR5416_NUM_2G_OFDM_TARGET_PWRS], + cal_tgt_pwr_2G_ht40[AR5416_NUM_2G_OFDM_TARGET_PWRS]; + + /* conformance testing limits */ + u8 ctl_index[AR5416_NUM_CTLS]; + struct ar9170_calctl_data + ctl_data[AR5416_NUM_CTLS]; + + u8 pad; + __le16 subsystem_id; +} __packed; + +#endif /* __AR9170_EEPROM_H */ diff --git a/drivers/net/wireless/ar9170/hw.h b/drivers/net/wireless/ar9170/hw.h new file mode 100644 index 00000000000..13091bd9d81 --- /dev/null +++ b/drivers/net/wireless/ar9170/hw.h @@ -0,0 +1,417 @@ +/* + * Atheros AR9170 driver + * + * Hardware-specific definitions + * + * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, see + * http://www.gnu.org/licenses/. + * + * This file incorporates work covered by the following copyright and + * permission notice: + * Copyright (c) 2007-2008 Atheros Communications, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +#ifndef __AR9170_HW_H +#define __AR9170_HW_H + +#define AR9170_MAX_CMD_LEN 64 + +enum ar9170_cmd { + AR9170_CMD_RREG = 0x00, + AR9170_CMD_WREG = 0x01, + AR9170_CMD_RMEM = 0x02, + AR9170_CMD_WMEM = 0x03, + AR9170_CMD_BITAND = 0x04, + AR9170_CMD_BITOR = 0x05, + AR9170_CMD_EKEY = 0x28, + AR9170_CMD_DKEY = 0x29, + AR9170_CMD_FREQUENCY = 0x30, + AR9170_CMD_RF_INIT = 0x31, + AR9170_CMD_SYNTH = 0x32, + AR9170_CMD_FREQ_START = 0x33, + AR9170_CMD_ECHO = 0x80, + AR9170_CMD_TALLY = 0x81, + AR9170_CMD_TALLY_APD = 0x82, + AR9170_CMD_CONFIG = 0x83, + AR9170_CMD_RESET = 0x90, + AR9170_CMD_DKRESET = 0x91, + AR9170_CMD_DKTX_STATUS = 0x92, + AR9170_CMD_FDC = 0xA0, + AR9170_CMD_WREEPROM = 0xB0, + AR9170_CMD_WFLASH = 0xB0, + AR9170_CMD_FLASH_ERASE = 0xB1, + AR9170_CMD_FLASH_PROG = 0xB2, + AR9170_CMD_FLASH_CHKSUM = 0xB3, + AR9170_CMD_FLASH_READ = 0xB4, + AR9170_CMD_FW_DL_INIT = 0xB5, + AR9170_CMD_MEM_WREEPROM = 0xBB, +}; + +/* endpoints */ +#define AR9170_EP_TX 1 +#define AR9170_EP_RX 2 +#define AR9170_EP_IRQ 3 +#define AR9170_EP_CMD 4 + +#define AR9170_EEPROM_START 0x1600 + +#define AR9170_GPIO_REG_BASE 0x1d0100 +#define AR9170_GPIO_REG_PORT_TYPE AR9170_GPIO_REG_BASE +#define AR9170_GPIO_REG_DATA (AR9170_GPIO_REG_BASE + 4) +#define AR9170_NUM_LEDS 2 + + +#define AR9170_USB_REG_BASE 0x1e1000 +#define AR9170_USB_REG_DMA_CTL (AR9170_USB_REG_BASE + 0x108) +#define AR9170_DMA_CTL_ENABLE_TO_DEVICE 0x1 +#define AR9170_DMA_CTL_ENABLE_FROM_DEVICE 0x2 +#define AR9170_DMA_CTL_HIGH_SPEED 0x4 +#define AR9170_DMA_CTL_PACKET_MODE 0x8 + +#define AR9170_USB_REG_MAX_AGG_UPLOAD (AR9170_USB_REG_BASE + 0x110) +#define AR9170_USB_REG_UPLOAD_TIME_CTL (AR9170_USB_REG_BASE + 0x114) + + + +#define AR9170_MAC_REG_BASE 0x1c3000 + +#define AR9170_MAC_REG_TSF_L (AR9170_MAC_REG_BASE + 0x514) +#define AR9170_MAC_REG_TSF_H (AR9170_MAC_REG_BASE + 0x518) + +#define AR9170_MAC_REG_ATIM_WINDOW (AR9170_MAC_REG_BASE + 0x51C) +#define AR9170_MAC_REG_BCN_PERIOD (AR9170_MAC_REG_BASE + 0x520) +#define AR9170_MAC_REG_PRETBTT (AR9170_MAC_REG_BASE + 0x524) + +#define AR9170_MAC_REG_MAC_ADDR_L (AR9170_MAC_REG_BASE + 0x610) +#define AR9170_MAC_REG_MAC_ADDR_H (AR9170_MAC_REG_BASE + 0x614) +#define AR9170_MAC_REG_BSSID_L (AR9170_MAC_REG_BASE + 0x618) +#define AR9170_MAC_REG_BSSID_H (AR9170_MAC_REG_BASE + 0x61c) + +#define AR9170_MAC_REG_GROUP_HASH_TBL_L (AR9170_MAC_REG_BASE + 0x624) +#define AR9170_MAC_REG_GROUP_HASH_TBL_H (AR9170_MAC_REG_BASE + 0x628) + +#define AR9170_MAC_REG_RX_TIMEOUT (AR9170_MAC_REG_BASE + 0x62C) + +#define AR9170_MAC_REG_BASIC_RATE (AR9170_MAC_REG_BASE + 0x630) +#define AR9170_MAC_REG_MANDATORY_RATE (AR9170_MAC_REG_BASE + 0x634) +#define AR9170_MAC_REG_RTS_CTS_RATE (AR9170_MAC_REG_BASE + 0x638) +#define AR9170_MAC_REG_BACKOFF_PROTECT (AR9170_MAC_REG_BASE + 0x63c) +#define AR9170_MAC_REG_RX_THRESHOLD (AR9170_MAC_REG_BASE + 0x640) +#define AR9170_MAC_REG_RX_PE_DELAY (AR9170_MAC_REG_BASE + 0x64C) + +#define AR9170_MAC_REG_DYNAMIC_SIFS_ACK (AR9170_MAC_REG_BASE + 0x658) +#define AR9170_MAC_REG_SNIFFER (AR9170_MAC_REG_BASE + 0x674) +#define AR9170_MAC_REG_SNIFFER_ENABLE_PROMISC BIT(0) +#define AR9170_MAC_REG_SNIFFER_DEFAULTS 0x02000000 +#define AR9170_MAC_REG_ENCRYPTION (AR9170_MAC_REG_BASE + 0x678) +#define AR9170_MAC_REG_ENCRYPTION_RX_SOFTWARE BIT(3) +#define AR9170_MAC_REG_ENCRYPTION_DEFAULTS 0x70 + +#define AR9170_MAC_REG_MISC_680 (AR9170_MAC_REG_BASE + 0x680) +#define AR9170_MAC_REG_TX_UNDERRUN (AR9170_MAC_REG_BASE + 0x688) + +#define AR9170_MAC_REG_FRAMETYPE_FILTER (AR9170_MAC_REG_BASE + 0x68c) +#define AR9170_MAC_REG_FTF_ASSOC_REQ BIT(0) +#define AR9170_MAC_REG_FTF_ASSOC_RESP BIT(1) +#define AR9170_MAC_REG_FTF_REASSOC_REQ BIT(2) +#define AR9170_MAC_REG_FTF_REASSOC_RESP BIT(3) +#define AR9170_MAC_REG_FTF_PRB_REQ BIT(4) +#define AR9170_MAC_REG_FTF_PRB_RESP BIT(5) +#define AR9170_MAC_REG_FTF_BIT6 BIT(6) +#define AR9170_MAC_REG_FTF_BIT7 BIT(7) +#define AR9170_MAC_REG_FTF_BEACON BIT(8) +#define AR9170_MAC_REG_FTF_ATIM BIT(9) +#define AR9170_MAC_REG_FTF_DEASSOC BIT(10) +#define AR9170_MAC_REG_FTF_AUTH BIT(11) +#define AR9170_MAC_REG_FTF_DEAUTH BIT(12) +#define AR9170_MAC_REG_FTF_BIT13 BIT(13) +#define AR9170_MAC_REG_FTF_BIT14 BIT(14) +#define AR9170_MAC_REG_FTF_BIT15 BIT(15) +#define AR9170_MAC_REG_FTF_BAR BIT(24) +#define AR9170_MAC_REG_FTF_BIT25 BIT(25) +#define AR9170_MAC_REG_FTF_PSPOLL BIT(26) +#define AR9170_MAC_REG_FTF_RTS BIT(27) +#define AR9170_MAC_REG_FTF_CTS BIT(28) +#define AR9170_MAC_REG_FTF_ACK BIT(29) +#define AR9170_MAC_REG_FTF_CFE BIT(30) +#define AR9170_MAC_REG_FTF_CFE_ACK BIT(31) +#define AR9170_MAC_REG_FTF_DEFAULTS 0x0500ffff +#define AR9170_MAC_REG_FTF_MONITOR 0xfd00ffff + +#define AR9170_MAC_REG_RX_TOTAL (AR9170_MAC_REG_BASE + 0x6A0) +#define AR9170_MAC_REG_RX_CRC32 (AR9170_MAC_REG_BASE + 0x6A4) +#define AR9170_MAC_REG_RX_CRC16 (AR9170_MAC_REG_BASE + 0x6A8) +#define AR9170_MAC_REG_RX_ERR_DECRYPTION_UNI (AR9170_MAC_REG_BASE + 0x6AC) +#define AR9170_MAC_REG_RX_OVERRUN (AR9170_MAC_REG_BASE + 0x6B0) +#define AR9170_MAC_REG_RX_ERR_DECRYPTION_MUL (AR9170_MAC_REG_BASE + 0x6BC) +#define AR9170_MAC_REG_TX_RETRY (AR9170_MAC_REG_BASE + 0x6CC) +#define AR9170_MAC_REG_TX_TOTAL (AR9170_MAC_REG_BASE + 0x6F4) + + +#define AR9170_MAC_REG_ACK_EXTENSION (AR9170_MAC_REG_BASE + 0x690) +#define AR9170_MAC_REG_EIFS_AND_SIFS (AR9170_MAC_REG_BASE + 0x698) + +#define AR9170_MAC_REG_SLOT_TIME (AR9170_MAC_REG_BASE + 0x6F0) + +#define AR9170_MAC_REG_POWERMANAGEMENT (AR9170_MAC_REG_BASE + 0x700) +#define AR9170_MAC_REG_POWERMGT_IBSS 0xe0 +#define AR9170_MAC_REG_POWERMGT_AP 0xa1 +#define AR9170_MAC_REG_POWERMGT_STA 0x2 +#define AR9170_MAC_REG_POWERMGT_AP_WDS 0x3 +#define AR9170_MAC_REG_POWERMGT_DEFAULTS (0xf << 24) + +#define AR9170_MAC_REG_ROLL_CALL_TBL_L (AR9170_MAC_REG_BASE + 0x704) +#define AR9170_MAC_REG_ROLL_CALL_TBL_H (AR9170_MAC_REG_BASE + 0x708) + +#define AR9170_MAC_REG_AC0_CW (AR9170_MAC_REG_BASE + 0xB00) +#define AR9170_MAC_REG_AC1_CW (AR9170_MAC_REG_BASE + 0xB04) +#define AR9170_MAC_REG_AC2_CW (AR9170_MAC_REG_BASE + 0xB08) +#define AR9170_MAC_REG_AC3_CW (AR9170_MAC_REG_BASE + 0xB0C) +#define AR9170_MAC_REG_AC4_CW (AR9170_MAC_REG_BASE + 0xB10) +#define AR9170_MAC_REG_AC1_AC0_AIFS (AR9170_MAC_REG_BASE + 0xB14) +#define AR9170_MAC_REG_AC3_AC2_AIFS (AR9170_MAC_REG_BASE + 0xB18) + +#define AR9170_MAC_REG_RETRY_MAX (AR9170_MAC_REG_BASE + 0xB28) + +#define AR9170_MAC_REG_FCS_SELECT (AR9170_MAC_REG_BASE + 0xBB0) +#define AR9170_MAC_FCS_SWFCS 0x1 +#define AR9170_MAC_FCS_FIFO_PROT 0x4 + + +#define AR9170_MAC_REG_TXOP_NOT_ENOUGH_IND (AR9170_MAC_REG_BASE + 0xB30) + +#define AR9170_MAC_REG_AC1_AC0_TXOP (AR9170_MAC_REG_BASE + 0xB44) +#define AR9170_MAC_REG_AC3_AC2_TXOP (AR9170_MAC_REG_BASE + 0xB48) + +#define AR9170_MAC_REG_ACK_TABLE (AR9170_MAC_REG_BASE + 0xC00) +#define AR9170_MAC_REG_AMPDU_RX_THRESH (AR9170_MAC_REG_BASE + 0xC50) + +#define AR9170_MAC_REG_TXRX_MPI (AR9170_MAC_REG_BASE + 0xD7C) +#define AR9170_MAC_TXRX_MPI_TX_MPI_MASK 0x0000000f +#define AR9170_MAC_TXRX_MPI_TX_TO_MASK 0x0000fff0 +#define AR9170_MAC_TXRX_MPI_RX_MPI_MASK 0x000f0000 +#define AR9170_MAC_TXRX_MPI_RX_TO_MASK 0xfff00000 + +#define AR9170_MAC_REG_BCN_ADDR (AR9170_MAC_REG_BASE + 0xD84) +#define AR9170_MAC_REG_BCN_LENGTH (AR9170_MAC_REG_BASE + 0xD88) +#define AR9170_MAC_REG_BCN_PLCP (AR9170_MAC_REG_BASE + 0xD90) +#define AR9170_MAC_REG_BCN_CTRL (AR9170_MAC_REG_BASE + 0xD94) +#define AR9170_MAC_REG_BCN_HT1 (AR9170_MAC_REG_BASE + 0xDA0) +#define AR9170_MAC_REG_BCN_HT2 (AR9170_MAC_REG_BASE + 0xDA4) + + +#define AR9170_PWR_REG_BASE 0x1D4000 + +#define AR9170_PWR_REG_CLOCK_SEL (AR9170_PWR_REG_BASE + 0x008) +#define AR9170_PWR_CLK_AHB_40MHZ 0 +#define AR9170_PWR_CLK_AHB_20_22MHZ 1 +#define AR9170_PWR_CLK_AHB_40_44MHZ 2 +#define AR9170_PWR_CLK_AHB_80_88MHZ 3 +#define AR9170_PWR_CLK_DAC_160_INV_DLY 0x70 + + +/* put beacon here in memory */ +#define AR9170_BEACON_BUFFER_ADDRESS 0x117900 + + +struct ar9170_tx_control { + __le16 length; + __le16 mac_control; + __le32 phy_control; + u8 frame_data[0]; +} __packed; + +/* these are either-or */ +#define AR9170_TX_MAC_PROT_RTS 0x0001 +#define AR9170_TX_MAC_PROT_CTS 0x0002 + +#define AR9170_TX_MAC_NO_ACK 0x0004 +/* if unset, MAC will only do SIFS space before frame */ +#define AR9170_TX_MAC_BACKOFF 0x0008 +#define AR9170_TX_MAC_BURST 0x0010 +#define AR9170_TX_MAC_AGGR 0x0020 + +/* encryption is a two-bit field */ +#define AR9170_TX_MAC_ENCR_NONE 0x0000 +#define AR9170_TX_MAC_ENCR_RC4 0x0040 +#define AR9170_TX_MAC_ENCR_CENC 0x0080 +#define AR9170_TX_MAC_ENCR_AES 0x00c0 + +#define AR9170_TX_MAC_MMIC 0x0100 +#define AR9170_TX_MAC_HW_DURATION 0x0200 +#define AR9170_TX_MAC_QOS_SHIFT 10 +#define AR9170_TX_MAC_QOS_MASK (3 << AR9170_TX_MAC_QOS_SHIFT) +#define AR9170_TX_MAC_AGGR_QOS_BIT1 0x0400 +#define AR9170_TX_MAC_AGGR_QOS_BIT2 0x0800 +#define AR9170_TX_MAC_DISABLE_TXOP 0x1000 +#define AR9170_TX_MAC_TXOP_RIFS 0x2000 +#define AR9170_TX_MAC_IMM_AMPDU 0x4000 +#define AR9170_TX_MAC_RATE_PROBE 0x8000 + +/* either-or */ +#define AR9170_TX_PHY_MOD_CCK 0x00000000 +#define AR9170_TX_PHY_MOD_OFDM 0x00000001 +#define AR9170_TX_PHY_MOD_HT 0x00000002 + +/* depends on modulation */ +#define AR9170_TX_PHY_SHORT_PREAMBLE 0x00000004 +#define AR9170_TX_PHY_GREENFIELD 0x00000004 + +#define AR9170_TX_PHY_BW_SHIFT 3 +#define AR9170_TX_PHY_BW_MASK (3 << AR9170_TX_PHY_BW_SHIFT) +#define AR9170_TX_PHY_BW_20MHZ 0 +#define AR9170_TX_PHY_BW_40MHZ 2 +#define AR9170_TX_PHY_BW_40MHZ_DUP 3 + +#define AR9170_TX_PHY_TX_HEAVY_CLIP_SHIFT 6 +#define AR9170_TX_PHY_TX_HEAVY_CLIP_MASK (7 << AR9170_TX_PHY_TX_HEAVY_CLIP_SHIFT) + +#define AR9170_TX_PHY_TX_PWR_SHIFT 9 +#define AR9170_TX_PHY_TX_PWR_MASK (0x3f << AR9170_TX_PHY_TX_PWR_SHIFT) + +/* not part of the hw-spec */ +#define AR9170_TX_PHY_QOS_SHIFT 25 +#define AR9170_TX_PHY_QOS_MASK (3 << AR9170_TX_PHY_QOS_SHIFT) + +#define AR9170_TX_PHY_TXCHAIN_SHIFT 15 +#define AR9170_TX_PHY_TXCHAIN_MASK (7 << AR9170_TX_PHY_TXCHAIN_SHIFT) +#define AR9170_TX_PHY_TXCHAIN_1 1 +/* use for cck, ofdm 6/9/12/18/24 and HT if capable */ +#define AR9170_TX_PHY_TXCHAIN_2 5 + +#define AR9170_TX_PHY_MCS_SHIFT 18 +#define AR9170_TX_PHY_MCS_MASK (0x7f << AR9170_TX_PHY_MCS_SHIFT) + +#define AR9170_TX_PHY_SHORT_GI 0x80000000 + +struct ar9170_rx_head { + u8 plcp[12]; +}; + +struct ar9170_rx_tail { + union { + struct { + u8 rssi_ant0, rssi_ant1, rssi_ant2, + rssi_ant0x, rssi_ant1x, rssi_ant2x, + rssi_combined; + }; + u8 rssi[7]; + }; + + u8 evm_stream0[6], evm_stream1[6]; + u8 phy_err; + u8 SAidx, DAidx; + u8 error; + u8 status; +}; + +#define AR9170_ENC_ALG_NONE 0x0 +#define AR9170_ENC_ALG_WEP64 0x1 +#define AR9170_ENC_ALG_TKIP 0x2 +#define AR9170_ENC_ALG_AESCCMP 0x4 +#define AR9170_ENC_ALG_WEP128 0x5 +#define AR9170_ENC_ALG_WEP256 0x6 +#define AR9170_ENC_ALG_CENC 0x7 + +#define AR9170_RX_ENC_SOFTWARE 0x8 + +static inline u8 ar9170_get_decrypt_type(struct ar9170_rx_tail *t) +{ + return (t->SAidx & 0xc0) >> 4 | + (t->DAidx & 0xc0) >> 6; +} + +#define AR9170_RX_STATUS_MODULATION_MASK 0x03 +#define AR9170_RX_STATUS_MODULATION_CCK 0x00 +#define AR9170_RX_STATUS_MODULATION_OFDM 0x01 +#define AR9170_RX_STATUS_MODULATION_HT 0x02 +#define AR9170_RX_STATUS_MODULATION_DUPOFDM 0x03 + +/* depends on modulation */ +#define AR9170_RX_STATUS_SHORT_PREAMBLE 0x08 +#define AR9170_RX_STATUS_GREENFIELD 0x08 + +#define AR9170_RX_STATUS_MPDU_MASK 0x30 +#define AR9170_RX_STATUS_MPDU_SINGLE 0x00 +#define AR9170_RX_STATUS_MPDU_FIRST 0x10 +#define AR9170_RX_STATUS_MPDU_MIDDLE 0x20 +#define AR9170_RX_STATUS_MPDU_LAST 0x30 + + +#define AR9170_RX_ERROR_RXTO 0x01 +#define AR9170_RX_ERROR_OVERRUN 0x02 +#define AR9170_RX_ERROR_DECRYPT 0x04 +#define AR9170_RX_ERROR_FCS 0x08 +#define AR9170_RX_ERROR_WRONG_RA 0x10 +#define AR9170_RX_ERROR_PLCP 0x20 +#define AR9170_RX_ERROR_MMIC 0x40 + +struct ar9170_cmd_tx_status { + __le16 unkn; + u8 dst[ETH_ALEN]; + __le32 rate; + __le16 status; +} __packed; + +#define AR9170_TX_STATUS_COMPLETE 0x00 +#define AR9170_TX_STATUS_RETRY 0x01 +#define AR9170_TX_STATUS_FAILED 0x02 + +struct ar9170_cmd_ba_failed_count { + __le16 failed; + __le16 rate; +} __packed; + +struct ar9170_cmd_response { + u8 flag; + u8 type; + + union { + struct ar9170_cmd_tx_status tx_status; + struct ar9170_cmd_ba_failed_count ba_fail_cnt; + u8 data[0]; + }; +} __packed; + +/* QoS */ + +/* mac80211 queue to HW/FW map */ +static const u8 ar9170_qos_hwmap[4] = { 3, 2, 0, 1 }; + +/* HW/FW queue to mac80211 map */ +static const u8 ar9170_qos_mac80211map[4] = { 2, 3, 1, 0 }; + +enum ar9170_txq { + AR9170_TXQ_BE, + AR9170_TXQ_BK, + AR9170_TXQ_VI, + AR9170_TXQ_VO, + + __AR9170_NUM_TXQ, +}; + +#endif /* __AR9170_HW_H */ diff --git a/drivers/net/wireless/ar9170/led.c b/drivers/net/wireless/ar9170/led.c new file mode 100644 index 00000000000..341cead7f60 --- /dev/null +++ b/drivers/net/wireless/ar9170/led.c @@ -0,0 +1,171 @@ +/* + * Atheros AR9170 driver + * + * LED handling + * + * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, see + * http://www.gnu.org/licenses/. + * + * This file incorporates work covered by the following copyright and + * permission notice: + * Copyright (c) 2007-2008 Atheros Communications, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include "ar9170.h" +#include "cmd.h" + +int ar9170_set_leds_state(struct ar9170 *ar, u32 led_state) +{ + return ar9170_write_reg(ar, AR9170_GPIO_REG_DATA, led_state); +} + +int ar9170_init_leds(struct ar9170 *ar) +{ + int err; + + /* disable LEDs */ + /* GPIO [0/1 mode: output, 2/3: input] */ + err = ar9170_write_reg(ar, AR9170_GPIO_REG_PORT_TYPE, 3); + if (err) + goto out; + + /* GPIO 0/1 value: off */ + err = ar9170_set_leds_state(ar, 0); + +out: + return err; +} + +#ifdef CONFIG_AR9170_LEDS +static void ar9170_update_leds(struct work_struct *work) +{ + struct ar9170 *ar = container_of(work, struct ar9170, led_work.work); + int i, tmp, blink_delay = 1000; + u32 led_val = 0; + bool rerun = false; + + if (unlikely(!IS_ACCEPTING_CMD(ar))) + return ; + + mutex_lock(&ar->mutex); + for (i = 0; i < AR9170_NUM_LEDS; i++) + if (ar->leds[i].toggled) { + led_val |= 1 << i; + + tmp = 70 + 200 / (ar->leds[i].toggled); + if (tmp < blink_delay) + blink_delay = tmp; + + if (ar->leds[i].toggled > 1) + ar->leds[i].toggled = 0; + + rerun = true; + } + + ar9170_set_leds_state(ar, led_val); + mutex_unlock(&ar->mutex); + + if (rerun) + queue_delayed_work(ar->hw->workqueue, &ar->led_work, + msecs_to_jiffies(blink_delay)); +} + +static void ar9170_led_brightness_set(struct led_classdev *led, + enum led_brightness brightness) +{ + struct ar9170_led *arl = container_of(led, struct ar9170_led, l); + struct ar9170 *ar = arl->ar; + + arl->toggled++; + + if (likely(IS_ACCEPTING_CMD(ar) && brightness)) + queue_delayed_work(ar->hw->workqueue, &ar->led_work, HZ/10); +} + +static int ar9170_register_led(struct ar9170 *ar, int i, char *name, + char *trigger) +{ + int err; + + snprintf(ar->leds[i].name, sizeof(ar->leds[i].name), + "ar9170-%s::%s", wiphy_name(ar->hw->wiphy), name); + + ar->leds[i].ar = ar; + ar->leds[i].l.name = ar->leds[i].name; + ar->leds[i].l.brightness_set = ar9170_led_brightness_set; + ar->leds[i].l.brightness = 0; + ar->leds[i].l.default_trigger = trigger; + + err = led_classdev_register(wiphy_dev(ar->hw->wiphy), + &ar->leds[i].l); + if (err) + printk(KERN_ERR "%s: failed to register %s LED (%d).\n", + wiphy_name(ar->hw->wiphy), ar->leds[i].name, err); + else + ar->leds[i].registered = true; + + return err; +} + +void ar9170_unregister_leds(struct ar9170 *ar) +{ + int i; + + cancel_delayed_work_sync(&ar->led_work); + + for (i = 0; i < AR9170_NUM_LEDS; i++) + if (ar->leds[i].registered) { + led_classdev_unregister(&ar->leds[i].l); + ar->leds[i].registered = false; + } +} + +int ar9170_register_leds(struct ar9170 *ar) +{ + int err; + + INIT_DELAYED_WORK(&ar->led_work, ar9170_update_leds); + + err = ar9170_register_led(ar, 0, "tx", + ieee80211_get_tx_led_name(ar->hw)); + if (err) + goto fail; + + err = ar9170_register_led(ar, 1, "assoc", + ieee80211_get_assoc_led_name(ar->hw)); + if (err) + goto fail; + + return 0; + +fail: + ar9170_unregister_leds(ar); + return err; +} + +#endif /* CONFIG_AR9170_LEDS */ diff --git a/drivers/net/wireless/ar9170/mac.c b/drivers/net/wireless/ar9170/mac.c new file mode 100644 index 00000000000..c8fa3073169 --- /dev/null +++ b/drivers/net/wireless/ar9170/mac.c @@ -0,0 +1,452 @@ +/* + * Atheros AR9170 driver + * + * MAC programming + * + * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, see + * http://www.gnu.org/licenses/. + * + * This file incorporates work covered by the following copyright and + * permission notice: + * Copyright (c) 2007-2008 Atheros Communications, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +#include "ar9170.h" +#include "cmd.h" + +int ar9170_set_qos(struct ar9170 *ar) +{ + ar9170_regwrite_begin(ar); + + ar9170_regwrite(AR9170_MAC_REG_AC0_CW, ar->edcf[0].cw_min | + (ar->edcf[0].cw_max << 16)); + ar9170_regwrite(AR9170_MAC_REG_AC1_CW, ar->edcf[1].cw_min | + (ar->edcf[1].cw_max << 16)); + ar9170_regwrite(AR9170_MAC_REG_AC2_CW, ar->edcf[2].cw_min | + (ar->edcf[2].cw_max << 16)); + ar9170_regwrite(AR9170_MAC_REG_AC3_CW, ar->edcf[3].cw_min | + (ar->edcf[3].cw_max << 16)); + ar9170_regwrite(AR9170_MAC_REG_AC4_CW, ar->edcf[4].cw_min | + (ar->edcf[4].cw_max << 16)); + + ar9170_regwrite(AR9170_MAC_REG_AC1_AC0_AIFS, + ((ar->edcf[0].aifs * 9 + 10)) | + ((ar->edcf[1].aifs * 9 + 10) << 12) | + ((ar->edcf[2].aifs * 9 + 10) << 24)); + ar9170_regwrite(AR9170_MAC_REG_AC3_AC2_AIFS, + ((ar->edcf[2].aifs * 9 + 10) >> 8) | + ((ar->edcf[3].aifs * 9 + 10) << 4) | + ((ar->edcf[4].aifs * 9 + 10) << 16)); + + ar9170_regwrite(AR9170_MAC_REG_AC1_AC0_TXOP, + ar->edcf[0].txop | ar->edcf[1].txop << 16); + ar9170_regwrite(AR9170_MAC_REG_AC3_AC2_TXOP, + ar->edcf[1].txop | ar->edcf[3].txop << 16); + + ar9170_regwrite_finish(); + + return ar9170_regwrite_result(); +} + +int ar9170_init_mac(struct ar9170 *ar) +{ + ar9170_regwrite_begin(ar); + + ar9170_regwrite(AR9170_MAC_REG_ACK_EXTENSION, 0x40); + + ar9170_regwrite(AR9170_MAC_REG_RETRY_MAX, 0); + + /* enable MMIC */ + ar9170_regwrite(AR9170_MAC_REG_SNIFFER, + AR9170_MAC_REG_SNIFFER_DEFAULTS); + + ar9170_regwrite(AR9170_MAC_REG_RX_THRESHOLD, 0xc1f80); + + ar9170_regwrite(AR9170_MAC_REG_RX_PE_DELAY, 0x70); + ar9170_regwrite(AR9170_MAC_REG_EIFS_AND_SIFS, 0xa144000); + ar9170_regwrite(AR9170_MAC_REG_SLOT_TIME, 9 << 10); + + /* CF-END mode */ + ar9170_regwrite(0x1c3b2c, 0x19000000); + + /* NAV protects ACK only (in TXOP) */ + ar9170_regwrite(0x1c3b38, 0x201); + + /* Set Beacon PHY CTRL's TPC to 0x7, TA1=1 */ + /* OTUS set AM to 0x1 */ + ar9170_regwrite(AR9170_MAC_REG_BCN_HT1, 0x8000170); + + ar9170_regwrite(AR9170_MAC_REG_BACKOFF_PROTECT, 0x105); + + /* AGG test code*/ + /* Aggregation MAX number and timeout */ + ar9170_regwrite(0x1c3b9c, 0x10000a); + + ar9170_regwrite(AR9170_MAC_REG_FRAMETYPE_FILTER, + AR9170_MAC_REG_FTF_DEFAULTS); + + /* Enable deaggregator, response in sniffer mode */ + ar9170_regwrite(0x1c3c40, 0x1 | 1<<30); + + /* rate sets */ + ar9170_regwrite(AR9170_MAC_REG_BASIC_RATE, 0x150f); + ar9170_regwrite(AR9170_MAC_REG_MANDATORY_RATE, 0x150f); + ar9170_regwrite(AR9170_MAC_REG_RTS_CTS_RATE, 0x10b01bb); + + /* MIMO response control */ + ar9170_regwrite(0x1c3694, 0x4003C1E);/* bit 26~28 otus-AM */ + + /* switch MAC to OTUS interface */ + ar9170_regwrite(0x1c3600, 0x3); + + ar9170_regwrite(AR9170_MAC_REG_AMPDU_RX_THRESH, 0xffff); + + /* set PHY register read timeout (??) */ + ar9170_regwrite(AR9170_MAC_REG_MISC_680, 0xf00008); + + /* Disable Rx TimeOut, workaround for BB. */ + ar9170_regwrite(AR9170_MAC_REG_RX_TIMEOUT, 0x0); + + /* Set CPU clock frequency to 88/80MHz */ + ar9170_regwrite(AR9170_PWR_REG_CLOCK_SEL, + AR9170_PWR_CLK_AHB_80_88MHZ | + AR9170_PWR_CLK_DAC_160_INV_DLY); + + /* Set WLAN DMA interrupt mode: generate int per packet */ + ar9170_regwrite(AR9170_MAC_REG_TXRX_MPI, 0x110011); + + ar9170_regwrite(AR9170_MAC_REG_FCS_SELECT, + AR9170_MAC_FCS_FIFO_PROT); + + /* Disables the CF_END frame, undocumented register */ + ar9170_regwrite(AR9170_MAC_REG_TXOP_NOT_ENOUGH_IND, + 0x141E0F48); + + ar9170_regwrite_finish(); + + return ar9170_regwrite_result(); +} + +static int ar9170_set_mac_reg(struct ar9170 *ar, const u32 reg, const u8 *mac) +{ + static const u8 zero[ETH_ALEN] = { 0 }; + + if (!mac) + mac = zero; + + ar9170_regwrite_begin(ar); + + ar9170_regwrite(reg, + (mac[3] << 24) | (mac[2] << 16) | + (mac[1] << 8) | mac[0]); + + ar9170_regwrite(reg + 4, (mac[5] << 8) | mac[4]); + + ar9170_regwrite_finish(); + + return ar9170_regwrite_result(); +} + +int ar9170_update_multicast(struct ar9170 *ar) +{ + int err; + + ar9170_regwrite_begin(ar); + ar9170_regwrite(AR9170_MAC_REG_GROUP_HASH_TBL_H, + ar->want_mc_hash >> 32); + ar9170_regwrite(AR9170_MAC_REG_GROUP_HASH_TBL_L, + ar->want_mc_hash); + + ar9170_regwrite_finish(); + err = ar9170_regwrite_result(); + + if (err) + return err; + + ar->cur_mc_hash = ar->want_mc_hash; + + return 0; +} + +int ar9170_update_frame_filter(struct ar9170 *ar) +{ + int err; + + err = ar9170_write_reg(ar, AR9170_MAC_REG_FRAMETYPE_FILTER, + ar->want_filter); + + if (err) + return err; + + ar->cur_filter = ar->want_filter; + + return 0; +} + +static int ar9170_set_promiscouous(struct ar9170 *ar) +{ + u32 encr_mode, sniffer; + int err; + + err = ar9170_read_reg(ar, AR9170_MAC_REG_SNIFFER, &sniffer); + if (err) + return err; + + err = ar9170_read_reg(ar, AR9170_MAC_REG_ENCRYPTION, &encr_mode); + if (err) + return err; + + if (ar->sniffer_enabled) { + sniffer |= AR9170_MAC_REG_SNIFFER_ENABLE_PROMISC; + + /* + * Rx decryption works in place. + * + * If we don't disable it, the hardware will render all + * encrypted frames which are encrypted with an unknown + * key useless. + */ + + encr_mode |= AR9170_MAC_REG_ENCRYPTION_RX_SOFTWARE; + ar->sniffer_enabled = true; + } else { + sniffer &= ~AR9170_MAC_REG_SNIFFER_ENABLE_PROMISC; + + if (ar->rx_software_decryption) + encr_mode |= AR9170_MAC_REG_ENCRYPTION_RX_SOFTWARE; + else + encr_mode &= ~AR9170_MAC_REG_ENCRYPTION_RX_SOFTWARE; + } + + ar9170_regwrite_begin(ar); + ar9170_regwrite(AR9170_MAC_REG_ENCRYPTION, encr_mode); + ar9170_regwrite(AR9170_MAC_REG_SNIFFER, sniffer); + ar9170_regwrite_finish(); + + return ar9170_regwrite_result(); +} + +int ar9170_set_operating_mode(struct ar9170 *ar) +{ + u32 pm_mode = AR9170_MAC_REG_POWERMGT_DEFAULTS; + u8 *mac_addr, *bssid; + int err; + + if (ar->vif) { + mac_addr = ar->mac_addr; + bssid = ar->bssid; + + switch (ar->vif->type) { + case NL80211_IFTYPE_MESH_POINT: + case NL80211_IFTYPE_ADHOC: + pm_mode |= AR9170_MAC_REG_POWERMGT_IBSS; + break; +/* case NL80211_IFTYPE_AP: + pm_mode |= AR9170_MAC_REG_POWERMGT_AP; + break;*/ + case NL80211_IFTYPE_WDS: + pm_mode |= AR9170_MAC_REG_POWERMGT_AP_WDS; + break; + case NL80211_IFTYPE_MONITOR: + ar->sniffer_enabled = true; + ar->rx_software_decryption = true; + break; + default: + pm_mode |= AR9170_MAC_REG_POWERMGT_STA; + break; + } + } else { + mac_addr = NULL; + bssid = NULL; + } + + err = ar9170_set_mac_reg(ar, AR9170_MAC_REG_MAC_ADDR_L, mac_addr); + if (err) + return err; + + err = ar9170_set_mac_reg(ar, AR9170_MAC_REG_BSSID_L, bssid); + if (err) + return err; + + err = ar9170_set_promiscouous(ar); + if (err) + return err; + + ar9170_regwrite_begin(ar); + + ar9170_regwrite(AR9170_MAC_REG_POWERMANAGEMENT, pm_mode); + ar9170_regwrite_finish(); + + return ar9170_regwrite_result(); +} + +int ar9170_set_hwretry_limit(struct ar9170 *ar, unsigned int max_retry) +{ + u32 tmp = min_t(u32, 0x33333, max_retry * 0x11111); + + return ar9170_write_reg(ar, AR9170_MAC_REG_RETRY_MAX, tmp); +} + +int ar9170_set_beacon_timers(struct ar9170 *ar) +{ + u32 v = 0; + u32 pretbtt = 0; + + v |= ar->hw->conf.beacon_int; + + if (ar->vif) { + switch (ar->vif->type) { + case NL80211_IFTYPE_MESH_POINT: + case NL80211_IFTYPE_ADHOC: + v |= BIT(25); + break; + case NL80211_IFTYPE_AP: + v |= BIT(24); + pretbtt = (ar->hw->conf.beacon_int - 6) << 16; + break; + default: + break; + } + + v |= ar->vif->bss_conf.dtim_period << 16; + } + + ar9170_regwrite_begin(ar); + + ar9170_regwrite(AR9170_MAC_REG_PRETBTT, pretbtt); + ar9170_regwrite(AR9170_MAC_REG_BCN_PERIOD, v); + ar9170_regwrite_finish(); + return ar9170_regwrite_result(); +} + +int ar9170_update_beacon(struct ar9170 *ar) +{ + struct sk_buff *skb; + __le32 *data, *old = NULL; + u32 word; + int i; + + skb = ieee80211_beacon_get(ar->hw, ar->vif); + if (!skb) + return -ENOMEM; + + data = (__le32 *)skb->data; + if (ar->beacon) + old = (__le32 *)ar->beacon->data; + + ar9170_regwrite_begin(ar); + for (i = 0; i < DIV_ROUND_UP(skb->len, 4); i++) { + /* + * XXX: This accesses beyond skb data for up + * to the last 3 bytes!! + */ + + if (old && (data[i] == old[i])) + continue; + + word = le32_to_cpu(data[i]); + ar9170_regwrite(AR9170_BEACON_BUFFER_ADDRESS + 4 * i, word); + } + + /* XXX: use skb->cb info */ + if (ar->hw->conf.channel->band == IEEE80211_BAND_2GHZ) + ar9170_regwrite(AR9170_MAC_REG_BCN_PLCP, + ((skb->len + 4) << (3+16)) + 0x0400); + else + ar9170_regwrite(AR9170_MAC_REG_BCN_PLCP, + ((skb->len + 4) << (3+16)) + 0x0400); + + ar9170_regwrite(AR9170_MAC_REG_BCN_LENGTH, skb->len + 4); + ar9170_regwrite(AR9170_MAC_REG_BCN_ADDR, AR9170_BEACON_BUFFER_ADDRESS); + ar9170_regwrite(AR9170_MAC_REG_BCN_CTRL, 1); + + ar9170_regwrite_finish(); + + dev_kfree_skb(ar->beacon); + ar->beacon = skb; + + return ar9170_regwrite_result(); +} + +void ar9170_new_beacon(struct work_struct *work) +{ + struct ar9170 *ar = container_of(work, struct ar9170, + beacon_work); + struct sk_buff *skb; + + if (unlikely(!IS_STARTED(ar))) + return ; + + mutex_lock(&ar->mutex); + + if (!ar->vif) + goto out; + + ar9170_update_beacon(ar); + + rcu_read_lock(); + while ((skb = ieee80211_get_buffered_bc(ar->hw, ar->vif))) + ar9170_op_tx(ar->hw, skb); + + rcu_read_unlock(); + + out: + mutex_unlock(&ar->mutex); +} + +int ar9170_upload_key(struct ar9170 *ar, u8 id, const u8 *mac, u8 ktype, + u8 keyidx, u8 *keydata, int keylen) +{ + __le32 vals[7]; + static const u8 bcast[ETH_ALEN] = + { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; + u8 dummy; + + mac = mac ? : bcast; + + vals[0] = cpu_to_le32((keyidx << 16) + id); + vals[1] = cpu_to_le32(mac[1] << 24 | mac[0] << 16 | ktype); + vals[2] = cpu_to_le32(mac[5] << 24 | mac[4] << 16 | + mac[3] << 8 | mac[2]); + memset(&vals[3], 0, 16); + if (keydata) + memcpy(&vals[3], keydata, keylen); + + return ar->exec_cmd(ar, AR9170_CMD_EKEY, + sizeof(vals), (u8 *)vals, + 1, &dummy); +} + +int ar9170_disable_key(struct ar9170 *ar, u8 id) +{ + __le32 val = cpu_to_le32(id); + u8 dummy; + + return ar->exec_cmd(ar, AR9170_CMD_EKEY, + sizeof(val), (u8 *)&val, + 1, &dummy); +} diff --git a/drivers/net/wireless/ar9170/main.c b/drivers/net/wireless/ar9170/main.c new file mode 100644 index 00000000000..5996ff9f7f4 --- /dev/null +++ b/drivers/net/wireless/ar9170/main.c @@ -0,0 +1,1671 @@ +/* + * Atheros AR9170 driver + * + * mac80211 interaction code + * + * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> + * Copyright 2009, Christian Lamparter <chunkeey@web.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, see + * http://www.gnu.org/licenses/. + * + * This file incorporates work covered by the following copyright and + * permission notice: + * Copyright (c) 2007-2008 Atheros Communications, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/etherdevice.h> +#include <net/mac80211.h> +#include "ar9170.h" +#include "hw.h" +#include "cmd.h" + +static int modparam_nohwcrypt; +module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); +MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); + +#define RATE(_bitrate, _hw_rate, _txpidx, _flags) { \ + .bitrate = (_bitrate), \ + .flags = (_flags), \ + .hw_value = (_hw_rate) | (_txpidx) << 4, \ +} + +static struct ieee80211_rate __ar9170_ratetable[] = { + RATE(10, 0, 0, 0), + RATE(20, 1, 1, IEEE80211_RATE_SHORT_PREAMBLE), + RATE(55, 2, 2, IEEE80211_RATE_SHORT_PREAMBLE), + RATE(110, 3, 3, IEEE80211_RATE_SHORT_PREAMBLE), + RATE(60, 0xb, 0, 0), + RATE(90, 0xf, 0, 0), + RATE(120, 0xa, 0, 0), + RATE(180, 0xe, 0, 0), + RATE(240, 0x9, 0, 0), + RATE(360, 0xd, 1, 0), + RATE(480, 0x8, 2, 0), + RATE(540, 0xc, 3, 0), +}; +#undef RATE + +#define ar9170_g_ratetable (__ar9170_ratetable + 0) +#define ar9170_g_ratetable_size 12 +#define ar9170_a_ratetable (__ar9170_ratetable + 4) +#define ar9170_a_ratetable_size 8 + +/* + * NB: The hw_value is used as an index into the ar9170_phy_freq_params + * array in phy.c so that we don't have to do frequency lookups! + */ +#define CHAN(_freq, _idx) { \ + .center_freq = (_freq), \ + .hw_value = (_idx), \ + .max_power = 18, /* XXX */ \ +} + +static struct ieee80211_channel ar9170_2ghz_chantable[] = { + CHAN(2412, 0), + CHAN(2417, 1), + CHAN(2422, 2), + CHAN(2427, 3), + CHAN(2432, 4), + CHAN(2437, 5), + CHAN(2442, 6), + CHAN(2447, 7), + CHAN(2452, 8), + CHAN(2457, 9), + CHAN(2462, 10), + CHAN(2467, 11), + CHAN(2472, 12), + CHAN(2484, 13), +}; + +static struct ieee80211_channel ar9170_5ghz_chantable[] = { + CHAN(4920, 14), + CHAN(4940, 15), + CHAN(4960, 16), + CHAN(4980, 17), + CHAN(5040, 18), + CHAN(5060, 19), + CHAN(5080, 20), + CHAN(5180, 21), + CHAN(5200, 22), + CHAN(5220, 23), + CHAN(5240, 24), + CHAN(5260, 25), + CHAN(5280, 26), + CHAN(5300, 27), + CHAN(5320, 28), + CHAN(5500, 29), + CHAN(5520, 30), + CHAN(5540, 31), + CHAN(5560, 32), + CHAN(5580, 33), + CHAN(5600, 34), + CHAN(5620, 35), + CHAN(5640, 36), + CHAN(5660, 37), + CHAN(5680, 38), + CHAN(5700, 39), + CHAN(5745, 40), + CHAN(5765, 41), + CHAN(5785, 42), + CHAN(5805, 43), + CHAN(5825, 44), + CHAN(5170, 45), + CHAN(5190, 46), + CHAN(5210, 47), + CHAN(5230, 48), +}; +#undef CHAN + +static struct ieee80211_supported_band ar9170_band_2GHz = { + .channels = ar9170_2ghz_chantable, + .n_channels = ARRAY_SIZE(ar9170_2ghz_chantable), + .bitrates = ar9170_g_ratetable, + .n_bitrates = ar9170_g_ratetable_size, +}; + +#ifdef AR9170_QUEUE_DEBUG +/* + * In case some wants works with AR9170's crazy tx_status queueing techniques. + * He might need this rather useful probing function. + * + * NOTE: caller must hold the queue's spinlock! + */ + +static void ar9170_print_txheader(struct ar9170 *ar, struct sk_buff *skb) +{ + struct ar9170_tx_control *txc = (void *) skb->data; + struct ieee80211_hdr *hdr = (void *)txc->frame_data; + + printk(KERN_DEBUG "%s: => FRAME [skb:%p, queue:%d, DA:[%pM] " + "mac_control:%04x, phy_control:%08x]\n", + wiphy_name(ar->hw->wiphy), skb, skb_get_queue_mapping(skb), + ieee80211_get_DA(hdr), le16_to_cpu(txc->mac_control), + le32_to_cpu(txc->phy_control)); +} + +static void ar9170_dump_station_tx_status_queue(struct ar9170 *ar, + struct sk_buff_head *queue) +{ + struct sk_buff *skb; + int i = 0; + + printk(KERN_DEBUG "---[ cut here ]---\n"); + printk(KERN_DEBUG "%s: %d entries in tx_status queue.\n", + wiphy_name(ar->hw->wiphy), skb_queue_len(queue)); + + skb_queue_walk(queue, skb) { + struct ar9170_tx_control *txc = (void *) skb->data; + struct ieee80211_hdr *hdr = (void *)txc->frame_data; + + printk(KERN_DEBUG "index:%d => \n", i); + ar9170_print_txheader(ar, skb); + } + printk(KERN_DEBUG "---[ end ]---\n"); +} +#endif /* AR9170_QUEUE_DEBUG */ + +static struct ieee80211_supported_band ar9170_band_5GHz = { + .channels = ar9170_5ghz_chantable, + .n_channels = ARRAY_SIZE(ar9170_5ghz_chantable), + .bitrates = ar9170_a_ratetable, + .n_bitrates = ar9170_a_ratetable_size, +}; + +void ar9170_handle_tx_status(struct ar9170 *ar, struct sk_buff *skb, + bool valid_status, u16 tx_status) +{ + struct ieee80211_tx_info *txinfo; + unsigned int retries = 0, queue = skb_get_queue_mapping(skb); + unsigned long flags; + + spin_lock_irqsave(&ar->tx_stats_lock, flags); + ar->tx_stats[queue].len--; + if (ieee80211_queue_stopped(ar->hw, queue)) + ieee80211_wake_queue(ar->hw, queue); + spin_unlock_irqrestore(&ar->tx_stats_lock, flags); + + txinfo = IEEE80211_SKB_CB(skb); + ieee80211_tx_info_clear_status(txinfo); + + switch (tx_status) { + case AR9170_TX_STATUS_RETRY: + retries = 2; + case AR9170_TX_STATUS_COMPLETE: + txinfo->flags |= IEEE80211_TX_STAT_ACK; + break; + + case AR9170_TX_STATUS_FAILED: + retries = ar->hw->conf.long_frame_max_tx_count; + break; + + default: + printk(KERN_ERR "%s: invalid tx_status response (%x).\n", + wiphy_name(ar->hw->wiphy), tx_status); + break; + } + + if (valid_status) + txinfo->status.rates[0].count = retries + 1; + + skb_pull(skb, sizeof(struct ar9170_tx_control)); + ieee80211_tx_status_irqsafe(ar->hw, skb); +} + +static struct sk_buff *ar9170_find_skb_in_queue(struct ar9170 *ar, + const u8 *mac, + const u32 queue, + struct sk_buff_head *q) +{ + unsigned long flags; + struct sk_buff *skb; + + spin_lock_irqsave(&q->lock, flags); + skb_queue_walk(q, skb) { + struct ar9170_tx_control *txc = (void *) skb->data; + struct ieee80211_hdr *hdr = (void *) txc->frame_data; + u32 txc_queue = (le32_to_cpu(txc->phy_control) & + AR9170_TX_PHY_QOS_MASK) >> + AR9170_TX_PHY_QOS_SHIFT; + + if ((queue != txc_queue) || + (compare_ether_addr(ieee80211_get_DA(hdr), mac))) + continue; + + __skb_unlink(skb, q); + spin_unlock_irqrestore(&q->lock, flags); + return skb; + } + spin_unlock_irqrestore(&q->lock, flags); + return NULL; +} + +static struct sk_buff *ar9170_find_queued_skb(struct ar9170 *ar, const u8 *mac, + const u32 queue) +{ + struct ieee80211_sta *sta; + struct sk_buff *skb; + + /* + * Unfortunately, the firmware does not tell to which (queued) frame + * this transmission status report belongs to. + * + * So we have to make risky guesses - with the scarce information + * the firmware provided (-> destination MAC, and phy_control) - + * and hope that we picked the right one... + */ + rcu_read_lock(); + sta = ieee80211_find_sta(ar->hw, mac); + + if (likely(sta)) { + struct ar9170_sta_info *sta_priv = (void *) sta->drv_priv; + skb = skb_dequeue(&sta_priv->tx_status[queue]); + rcu_read_unlock(); + if (likely(skb)) + return skb; + } else + rcu_read_unlock(); + + /* scan the waste queue for candidates */ + skb = ar9170_find_skb_in_queue(ar, mac, queue, + &ar->global_tx_status_waste); + if (!skb) { + /* so it still _must_ be in the global list. */ + skb = ar9170_find_skb_in_queue(ar, mac, queue, + &ar->global_tx_status); + } + +#ifdef AR9170_QUEUE_DEBUG + if (unlikely((!skb) && net_ratelimit())) { + printk(KERN_ERR "%s: ESS:[%pM] does not have any " + "outstanding frames in this queue (%d).\n", + wiphy_name(ar->hw->wiphy), mac, queue); + } +#endif /* AR9170_QUEUE_DEBUG */ + return skb; +} + +/* + * This worker tries to keep the global tx_status queue empty. + * So we can guarantee that incoming tx_status reports for + * unregistered stations are always synced with the actual + * frame - which we think - belongs to. + */ + +static void ar9170_tx_status_janitor(struct work_struct *work) +{ + struct ar9170 *ar = container_of(work, struct ar9170, + tx_status_janitor.work); + struct sk_buff *skb; + + if (unlikely(!IS_STARTED(ar))) + return ; + + mutex_lock(&ar->mutex); + /* recycle the garbage back to mac80211... one by one. */ + while ((skb = skb_dequeue(&ar->global_tx_status_waste))) { +#ifdef AR9170_QUEUE_DEBUG + printk(KERN_DEBUG "%s: dispose queued frame =>\n", + wiphy_name(ar->hw->wiphy)); + ar9170_print_txheader(ar, skb); +#endif /* AR9170_QUEUE_DEBUG */ + ar9170_handle_tx_status(ar, skb, false, + AR9170_TX_STATUS_FAILED); + } + + while ((skb = skb_dequeue(&ar->global_tx_status))) { +#ifdef AR9170_QUEUE_DEBUG + printk(KERN_DEBUG "%s: moving frame into waste queue =>\n", + wiphy_name(ar->hw->wiphy)); + + ar9170_print_txheader(ar, skb); +#endif /* AR9170_QUEUE_DEBUG */ + skb_queue_tail(&ar->global_tx_status_waste, skb); + } + + /* recall the janitor in 100ms - if there's garbage in the can. */ + if (skb_queue_len(&ar->global_tx_status_waste) > 0) + queue_delayed_work(ar->hw->workqueue, &ar->tx_status_janitor, + msecs_to_jiffies(100)); + + mutex_unlock(&ar->mutex); +} + +static void ar9170_handle_command_response(struct ar9170 *ar, + void *buf, u32 len) +{ + struct ar9170_cmd_response *cmd = (void *) buf; + + if ((cmd->type & 0xc0) != 0xc0) { + ar->callback_cmd(ar, len, buf); + return; + } + + /* hardware event handlers */ + switch (cmd->type) { + case 0xc1: { + /* + * TX status notification: + * bytes: 0c c1 XX YY M1 M2 M3 M4 M5 M6 R4 R3 R2 R1 S2 S1 + * + * XX always 81 + * YY always 00 + * M1-M6 is the MAC address + * R1-R4 is the transmit rate + * S1-S2 is the transmit status + */ + + struct sk_buff *skb; + u32 queue = (le32_to_cpu(cmd->tx_status.rate) & + AR9170_TX_PHY_QOS_MASK) >> AR9170_TX_PHY_QOS_SHIFT; + + skb = ar9170_find_queued_skb(ar, cmd->tx_status.dst, queue); + if (unlikely(!skb)) + return ; + + ar9170_handle_tx_status(ar, skb, true, + le16_to_cpu(cmd->tx_status.status)); + break; + } + + case 0xc0: + /* + * pre-TBTT event + */ + if (ar->vif && ar->vif->type == NL80211_IFTYPE_AP) + queue_work(ar->hw->workqueue, &ar->beacon_work); + break; + + case 0xc2: + /* + * (IBSS) beacon send notification + * bytes: 04 c2 XX YY B4 B3 B2 B1 + * + * XX always 80 + * YY always 00 + * B1-B4 "should" be the number of send out beacons. + */ + break; + + case 0xc3: + /* End of Atim Window */ + break; + + case 0xc4: + case 0xc5: + /* BlockACK events */ + break; + + case 0xc6: + /* Watchdog Interrupt */ + break; + + case 0xc9: + /* retransmission issue / SIFS/EIFS collision ?! */ + break; + + default: + printk(KERN_INFO "received unhandled event %x\n", cmd->type); + print_hex_dump_bytes("dump:", DUMP_PREFIX_NONE, buf, len); + break; + } +} + +/* + * If the frame alignment is right (or the kernel has + * CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS), and there + * is only a single MPDU in the USB frame, then we can + * submit to mac80211 the SKB directly. However, since + * there may be multiple packets in one SKB in stream + * mode, and we need to observe the proper ordering, + * this is non-trivial. + */ +static void ar9170_handle_mpdu(struct ar9170 *ar, u8 *buf, int len) +{ + struct sk_buff *skb; + struct ar9170_rx_head *head = (void *)buf; + struct ar9170_rx_tail *tail; + struct ieee80211_rx_status status; + int mpdu_len, i; + u8 error, antennas = 0, decrypt; + __le16 fc; + int reserved; + + if (unlikely(!IS_STARTED(ar))) + return ; + + /* Received MPDU */ + mpdu_len = len; + mpdu_len -= sizeof(struct ar9170_rx_head); + mpdu_len -= sizeof(struct ar9170_rx_tail); + BUILD_BUG_ON(sizeof(struct ar9170_rx_head) != 12); + BUILD_BUG_ON(sizeof(struct ar9170_rx_tail) != 24); + + if (mpdu_len <= FCS_LEN) + return; + + tail = (void *)(buf + sizeof(struct ar9170_rx_head) + mpdu_len); + + for (i = 0; i < 3; i++) + if (tail->rssi[i] != 0x80) + antennas |= BIT(i); + + /* post-process RSSI */ + for (i = 0; i < 7; i++) + if (tail->rssi[i] & 0x80) + tail->rssi[i] = ((tail->rssi[i] & 0x7f) + 1) & 0x7f; + + memset(&status, 0, sizeof(status)); + + status.band = ar->channel->band; + status.freq = ar->channel->center_freq; + status.signal = ar->noise[0] + tail->rssi_combined; + status.noise = ar->noise[0]; + status.antenna = antennas; + + switch (tail->status & AR9170_RX_STATUS_MODULATION_MASK) { + case AR9170_RX_STATUS_MODULATION_CCK: + if (tail->status & AR9170_RX_STATUS_SHORT_PREAMBLE) + status.flag |= RX_FLAG_SHORTPRE; + switch (head->plcp[0]) { + case 0x0a: + status.rate_idx = 0; + break; + case 0x14: + status.rate_idx = 1; + break; + case 0x37: + status.rate_idx = 2; + break; + case 0x6e: + status.rate_idx = 3; + break; + default: + if ((!ar->sniffer_enabled) && (net_ratelimit())) + printk(KERN_ERR "%s: invalid plcp cck rate " + "(%x).\n", wiphy_name(ar->hw->wiphy), + head->plcp[0]); + return; + } + break; + case AR9170_RX_STATUS_MODULATION_OFDM: + switch (head->plcp[0] & 0xF) { + case 0xB: + status.rate_idx = 0; + break; + case 0xF: + status.rate_idx = 1; + break; + case 0xA: + status.rate_idx = 2; + break; + case 0xE: + status.rate_idx = 3; + break; + case 0x9: + status.rate_idx = 4; + break; + case 0xD: + status.rate_idx = 5; + break; + case 0x8: + status.rate_idx = 6; + break; + case 0xC: + status.rate_idx = 7; + break; + default: + if ((!ar->sniffer_enabled) && (net_ratelimit())) + printk(KERN_ERR "%s: invalid plcp ofdm rate " + "(%x).\n", wiphy_name(ar->hw->wiphy), + head->plcp[0]); + return; + } + if (status.band == IEEE80211_BAND_2GHZ) + status.rate_idx += 4; + break; + case AR9170_RX_STATUS_MODULATION_HT: + case AR9170_RX_STATUS_MODULATION_DUPOFDM: + /* XXX */ + + if (net_ratelimit()) + printk(KERN_ERR "%s: invalid modulation\n", + wiphy_name(ar->hw->wiphy)); + return; + } + + error = tail->error; + + if (error & AR9170_RX_ERROR_MMIC) { + status.flag |= RX_FLAG_MMIC_ERROR; + error &= ~AR9170_RX_ERROR_MMIC; + } + + if (error & AR9170_RX_ERROR_PLCP) { + status.flag |= RX_FLAG_FAILED_PLCP_CRC; + error &= ~AR9170_RX_ERROR_PLCP; + } + + if (error & AR9170_RX_ERROR_FCS) { + status.flag |= RX_FLAG_FAILED_FCS_CRC; + error &= ~AR9170_RX_ERROR_FCS; + } + + decrypt = ar9170_get_decrypt_type(tail); + if (!(decrypt & AR9170_RX_ENC_SOFTWARE) && + decrypt != AR9170_ENC_ALG_NONE) + status.flag |= RX_FLAG_DECRYPTED; + + /* ignore wrong RA errors */ + error &= ~AR9170_RX_ERROR_WRONG_RA; + + if (error & AR9170_RX_ERROR_DECRYPT) { + error &= ~AR9170_RX_ERROR_DECRYPT; + + /* + * Rx decryption is done in place, + * the original data is lost anyway. + */ + return ; + } + + /* drop any other error frames */ + if ((error) && (net_ratelimit())) { + printk(KERN_DEBUG "%s: errors: %#x\n", + wiphy_name(ar->hw->wiphy), error); + return; + } + + buf += sizeof(struct ar9170_rx_head); + fc = *(__le16 *)buf; + + if (ieee80211_is_data_qos(fc) ^ ieee80211_has_a4(fc)) + reserved = 32 + 2; + else + reserved = 32; + + skb = dev_alloc_skb(mpdu_len + reserved); + if (!skb) + return; + + skb_reserve(skb, reserved); + memcpy(skb_put(skb, mpdu_len), buf, mpdu_len); + ieee80211_rx_irqsafe(ar->hw, skb, &status); +} + +void ar9170_rx(struct ar9170 *ar, struct sk_buff *skb) +{ + unsigned int i, tlen, resplen; + u8 *tbuf, *respbuf; + + tbuf = skb->data; + tlen = skb->len; + + while (tlen >= 4) { + int clen = tbuf[1] << 8 | tbuf[0]; + int wlen = (clen + 3) & ~3; + + /* + * parse stream (if any) + */ + if (tbuf[2] != 0 || tbuf[3] != 0x4e) { + printk(KERN_ERR "%s: missing tag!\n", + wiphy_name(ar->hw->wiphy)); + return ; + } + if (wlen > tlen - 4) { + printk(KERN_ERR "%s: invalid RX (%d, %d, %d)\n", + wiphy_name(ar->hw->wiphy), clen, wlen, tlen); + print_hex_dump(KERN_DEBUG, "data: ", + DUMP_PREFIX_OFFSET, + 16, 1, tbuf, tlen, true); + return ; + } + resplen = clen; + respbuf = tbuf + 4; + tbuf += wlen + 4; + tlen -= wlen + 4; + + i = 0; + + /* weird thing, but this is the same in the original driver */ + while (resplen > 2 && i < 12 && + respbuf[0] == 0xff && respbuf[1] == 0xff) { + i += 2; + resplen -= 2; + respbuf += 2; + } + + if (resplen < 4) + continue; + + /* found the 6 * 0xffff marker? */ + if (i == 12) + ar9170_handle_command_response(ar, respbuf, resplen); + else + ar9170_handle_mpdu(ar, respbuf, resplen); + } + + if (tlen) + printk(KERN_ERR "%s: buffer remains!\n", + wiphy_name(ar->hw->wiphy)); +} + +#define AR9170_FILL_QUEUE(queue, ai_fs, cwmin, cwmax, _txop) \ +do { \ + queue.aifs = ai_fs; \ + queue.cw_min = cwmin; \ + queue.cw_max = cwmax; \ + queue.txop = _txop; \ +} while (0) + +static int ar9170_op_start(struct ieee80211_hw *hw) +{ + struct ar9170 *ar = hw->priv; + int err, i; + + mutex_lock(&ar->mutex); + + /* reinitialize queues statistics */ + memset(&ar->tx_stats, 0, sizeof(ar->tx_stats)); + for (i = 0; i < ARRAY_SIZE(ar->tx_stats); i++) + ar->tx_stats[i].limit = 8; + + /* reset QoS defaults */ + AR9170_FILL_QUEUE(ar->edcf[0], 3, 15, 1023, 0); /* BEST EFFORT*/ + AR9170_FILL_QUEUE(ar->edcf[1], 7, 15, 1023, 0); /* BACKGROUND */ + AR9170_FILL_QUEUE(ar->edcf[2], 2, 7, 15, 94); /* VIDEO */ + AR9170_FILL_QUEUE(ar->edcf[3], 2, 3, 7, 47); /* VOICE */ + AR9170_FILL_QUEUE(ar->edcf[4], 2, 3, 7, 0); /* SPECIAL */ + + err = ar->open(ar); + if (err) + goto out; + + err = ar9170_init_mac(ar); + if (err) + goto out; + + err = ar9170_set_qos(ar); + if (err) + goto out; + + err = ar9170_init_phy(ar, IEEE80211_BAND_2GHZ); + if (err) + goto out; + + err = ar9170_init_rf(ar); + if (err) + goto out; + + /* start DMA */ + err = ar9170_write_reg(ar, 0x1c3d30, 0x100); + if (err) + goto out; + + ar->state = AR9170_STARTED; + +out: + mutex_unlock(&ar->mutex); + return err; +} + +static void ar9170_op_stop(struct ieee80211_hw *hw) +{ + struct ar9170 *ar = hw->priv; + + if (IS_STARTED(ar)) + ar->state = AR9170_IDLE; + + mutex_lock(&ar->mutex); + + cancel_delayed_work_sync(&ar->tx_status_janitor); + cancel_work_sync(&ar->filter_config_work); + cancel_work_sync(&ar->beacon_work); + skb_queue_purge(&ar->global_tx_status_waste); + skb_queue_purge(&ar->global_tx_status); + + if (IS_ACCEPTING_CMD(ar)) { + ar9170_set_leds_state(ar, 0); + + /* stop DMA */ + ar9170_write_reg(ar, 0x1c3d30, 0); + ar->stop(ar); + } + + mutex_unlock(&ar->mutex); +} + +int ar9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +{ + struct ar9170 *ar = hw->priv; + struct ieee80211_hdr *hdr; + struct ar9170_tx_control *txc; + struct ieee80211_tx_info *info; + struct ieee80211_rate *rate = NULL; + struct ieee80211_tx_rate *txrate; + unsigned int queue = skb_get_queue_mapping(skb); + unsigned long flags = 0; + struct ar9170_sta_info *sta_info = NULL; + u32 power, chains; + u16 keytype = 0; + u16 len, icv = 0; + int err; + bool tx_status; + + if (unlikely(!IS_STARTED(ar))) + goto err_free; + + hdr = (void *)skb->data; + info = IEEE80211_SKB_CB(skb); + len = skb->len; + + spin_lock_irqsave(&ar->tx_stats_lock, flags); + if (ar->tx_stats[queue].limit < ar->tx_stats[queue].len) { + spin_unlock_irqrestore(&ar->tx_stats_lock, flags); + return NETDEV_TX_OK; + } + + ar->tx_stats[queue].len++; + ar->tx_stats[queue].count++; + if (ar->tx_stats[queue].limit == ar->tx_stats[queue].len) + ieee80211_stop_queue(hw, queue); + + spin_unlock_irqrestore(&ar->tx_stats_lock, flags); + + txc = (void *)skb_push(skb, sizeof(*txc)); + + tx_status = (((info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE) != 0) || + ((info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS) != 0)); + + if (info->control.hw_key) { + icv = info->control.hw_key->icv_len; + + switch (info->control.hw_key->alg) { + case ALG_WEP: + keytype = AR9170_TX_MAC_ENCR_RC4; + break; + case ALG_TKIP: + keytype = AR9170_TX_MAC_ENCR_RC4; + break; + case ALG_CCMP: + keytype = AR9170_TX_MAC_ENCR_AES; + break; + default: + WARN_ON(1); + goto err_dequeue; + } + } + + /* Length */ + txc->length = cpu_to_le16(len + icv + 4); + + txc->mac_control = cpu_to_le16(AR9170_TX_MAC_HW_DURATION | + AR9170_TX_MAC_BACKOFF); + txc->mac_control |= cpu_to_le16(ar9170_qos_hwmap[queue] << + AR9170_TX_MAC_QOS_SHIFT); + txc->mac_control |= cpu_to_le16(keytype); + txc->phy_control = cpu_to_le32(0); + + if (info->flags & IEEE80211_TX_CTL_NO_ACK) + txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_NO_ACK); + + if (info->flags & IEEE80211_TX_CTL_AMPDU) + txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_AGGR); + + txrate = &info->control.rates[0]; + + if (txrate->flags & IEEE80211_TX_RC_USE_CTS_PROTECT) + txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_PROT_CTS); + else if (txrate->flags & IEEE80211_TX_RC_USE_RTS_CTS) + txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_PROT_RTS); + + if (txrate->flags & IEEE80211_TX_RC_GREEN_FIELD) + txc->phy_control |= cpu_to_le32(AR9170_TX_PHY_GREENFIELD); + + if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) + txc->phy_control |= cpu_to_le32(AR9170_TX_PHY_SHORT_PREAMBLE); + + if (txrate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) + txc->phy_control |= cpu_to_le32(AR9170_TX_PHY_BW_40MHZ); + /* this works because 40 MHz is 2 and dup is 3 */ + if (txrate->flags & IEEE80211_TX_RC_DUP_DATA) + txc->phy_control |= cpu_to_le32(AR9170_TX_PHY_BW_40MHZ_DUP); + + if (txrate->flags & IEEE80211_TX_RC_SHORT_GI) + txc->phy_control |= cpu_to_le32(AR9170_TX_PHY_SHORT_GI); + + if (txrate->flags & IEEE80211_TX_RC_MCS) { + u32 r = txrate->idx; + u8 *txpower; + + r <<= AR9170_TX_PHY_MCS_SHIFT; + if (WARN_ON(r & ~AR9170_TX_PHY_MCS_MASK)) + goto err_dequeue; + txc->phy_control |= cpu_to_le32(r & AR9170_TX_PHY_MCS_MASK); + txc->phy_control |= cpu_to_le32(AR9170_TX_PHY_MOD_HT); + + if (txrate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) { + if (info->band == IEEE80211_BAND_5GHZ) + txpower = ar->power_5G_ht40; + else + txpower = ar->power_2G_ht40; + } else { + if (info->band == IEEE80211_BAND_5GHZ) + txpower = ar->power_5G_ht20; + else + txpower = ar->power_2G_ht20; + } + + power = txpower[(txrate->idx) & 7]; + } else { + u8 *txpower; + u32 mod; + u32 phyrate; + u8 idx = txrate->idx; + + if (info->band != IEEE80211_BAND_2GHZ) { + idx += 4; + txpower = ar->power_5G_leg; + mod = AR9170_TX_PHY_MOD_OFDM; + } else { + if (idx < 4) { + txpower = ar->power_2G_cck; + mod = AR9170_TX_PHY_MOD_CCK; + } else { + mod = AR9170_TX_PHY_MOD_OFDM; + txpower = ar->power_2G_ofdm; + } + } + + rate = &__ar9170_ratetable[idx]; + + phyrate = rate->hw_value & 0xF; + power = txpower[(rate->hw_value & 0x30) >> 4]; + phyrate <<= AR9170_TX_PHY_MCS_SHIFT; + + txc->phy_control |= cpu_to_le32(mod); + txc->phy_control |= cpu_to_le32(phyrate); + } + + power <<= AR9170_TX_PHY_TX_PWR_SHIFT; + power &= AR9170_TX_PHY_TX_PWR_MASK; + txc->phy_control |= cpu_to_le32(power); + + /* set TX chains */ + if (ar->eeprom.tx_mask == 1) { + chains = AR9170_TX_PHY_TXCHAIN_1; + } else { + chains = AR9170_TX_PHY_TXCHAIN_2; + + /* >= 36M legacy OFDM - use only one chain */ + if (rate && rate->bitrate >= 360) + chains = AR9170_TX_PHY_TXCHAIN_1; + } + txc->phy_control |= cpu_to_le32(chains << AR9170_TX_PHY_TXCHAIN_SHIFT); + + if (tx_status) { + txc->mac_control |= cpu_to_le16(AR9170_TX_MAC_RATE_PROBE); + /* + * WARNING: + * Putting the QoS queue bits into an unexplored territory is + * certainly not elegant. + * + * In my defense: This idea provides a reasonable way to + * smuggle valuable information to the tx_status callback. + * Also, the idea behind this bit-abuse came straight from + * the original driver code. + */ + + txc->phy_control |= + cpu_to_le32(queue << AR9170_TX_PHY_QOS_SHIFT); + + if (info->control.sta) { + sta_info = (void *) info->control.sta->drv_priv; + skb_queue_tail(&sta_info->tx_status[queue], skb); + } else { + skb_queue_tail(&ar->global_tx_status, skb); + + queue_delayed_work(ar->hw->workqueue, + &ar->tx_status_janitor, + msecs_to_jiffies(100)); + } + } + + err = ar->tx(ar, skb, tx_status, 0); + if (unlikely(tx_status && err)) { + if (info->control.sta) + skb_unlink(skb, &sta_info->tx_status[queue]); + else + skb_unlink(skb, &ar->global_tx_status); + } + + return NETDEV_TX_OK; + +err_dequeue: + spin_lock_irqsave(&ar->tx_stats_lock, flags); + ar->tx_stats[queue].len--; + ar->tx_stats[queue].count--; + spin_unlock_irqrestore(&ar->tx_stats_lock, flags); + +err_free: + dev_kfree_skb(skb); + return NETDEV_TX_OK; +} + +static int ar9170_op_add_interface(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf) +{ + struct ar9170 *ar = hw->priv; + int err = 0; + + mutex_lock(&ar->mutex); + + if (ar->vif) { + err = -EBUSY; + goto unlock; + } + + ar->vif = conf->vif; + memcpy(ar->mac_addr, conf->mac_addr, ETH_ALEN); + + if (modparam_nohwcrypt || (ar->vif->type != NL80211_IFTYPE_STATION)) { + ar->rx_software_decryption = true; + ar->disable_offload = true; + } + + ar->cur_filter = 0; + ar->want_filter = AR9170_MAC_REG_FTF_DEFAULTS; + err = ar9170_update_frame_filter(ar); + if (err) + goto unlock; + + err = ar9170_set_operating_mode(ar); + +unlock: + mutex_unlock(&ar->mutex); + return err; +} + +static void ar9170_op_remove_interface(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf) +{ + struct ar9170 *ar = hw->priv; + + mutex_lock(&ar->mutex); + ar->vif = NULL; + ar->want_filter = 0; + ar9170_update_frame_filter(ar); + ar9170_set_beacon_timers(ar); + dev_kfree_skb(ar->beacon); + ar->beacon = NULL; + ar->sniffer_enabled = false; + ar->rx_software_decryption = false; + ar9170_set_operating_mode(ar); + mutex_unlock(&ar->mutex); +} + +static int ar9170_op_config(struct ieee80211_hw *hw, u32 changed) +{ + struct ar9170 *ar = hw->priv; + int err = 0; + + mutex_lock(&ar->mutex); + + if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED) { + /* TODO */ + err = 0; + } + + if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) { + /* TODO */ + err = 0; + } + + if (changed & IEEE80211_CONF_CHANGE_PS) { + /* TODO */ + err = 0; + } + + if (changed & IEEE80211_CONF_CHANGE_POWER) { + /* TODO */ + err = 0; + } + + if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) { + /* + * is it long_frame_max_tx_count or short_frame_max_tx_count? + */ + + err = ar9170_set_hwretry_limit(ar, + ar->hw->conf.long_frame_max_tx_count); + if (err) + goto out; + } + + if (changed & IEEE80211_CONF_CHANGE_BEACON_INTERVAL) { + err = ar9170_set_beacon_timers(ar); + if (err) + goto out; + } + + if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { + err = ar9170_set_channel(ar, hw->conf.channel, + AR9170_RFI_NONE, AR9170_BW_20); + if (err) + goto out; + /* adjust slot time for 5 GHz */ + if (hw->conf.channel->band == IEEE80211_BAND_5GHZ) + err = ar9170_write_reg(ar, AR9170_MAC_REG_SLOT_TIME, + 9 << 10); + } + +out: + mutex_unlock(&ar->mutex); + return err; +} + +static int ar9170_op_config_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_if_conf *conf) +{ + struct ar9170 *ar = hw->priv; + int err = 0; + + mutex_lock(&ar->mutex); + + if (conf->changed & IEEE80211_IFCC_BSSID) { + memcpy(ar->bssid, conf->bssid, ETH_ALEN); + err = ar9170_set_operating_mode(ar); + } + + if (conf->changed & IEEE80211_IFCC_BEACON) { + err = ar9170_update_beacon(ar); + + if (err) + goto out; + err = ar9170_set_beacon_timers(ar); + } + +out: + mutex_unlock(&ar->mutex); + return err; +} + +static void ar9170_set_filters(struct work_struct *work) +{ + struct ar9170 *ar = container_of(work, struct ar9170, + filter_config_work); + int err; + + mutex_lock(&ar->mutex); + if (unlikely(!IS_STARTED(ar))) + goto unlock; + + if (ar->filter_changed & AR9170_FILTER_CHANGED_PROMISC) { + err = ar9170_set_operating_mode(ar); + if (err) + goto unlock; + } + + if (ar->filter_changed & AR9170_FILTER_CHANGED_MULTICAST) { + err = ar9170_update_multicast(ar); + if (err) + goto unlock; + } + + if (ar->filter_changed & AR9170_FILTER_CHANGED_FRAMEFILTER) + err = ar9170_update_frame_filter(ar); + +unlock: + mutex_unlock(&ar->mutex); +} + +static void ar9170_op_configure_filter(struct ieee80211_hw *hw, + unsigned int changed_flags, + unsigned int *new_flags, + int mc_count, struct dev_mc_list *mclist) +{ + struct ar9170 *ar = hw->priv; + + /* mask supported flags */ + *new_flags &= FIF_ALLMULTI | FIF_CONTROL | FIF_BCN_PRBRESP_PROMISC | + FIF_PROMISC_IN_BSS; + + /* + * We can support more by setting the sniffer bit and + * then checking the error flags, later. + */ + + if (changed_flags & FIF_ALLMULTI) { + if (*new_flags & FIF_ALLMULTI) { + ar->want_mc_hash = ~0ULL; + } else { + u64 mchash; + int i; + + /* always get broadcast frames */ + mchash = 1ULL << (0xff>>2); + + for (i = 0; i < mc_count; i++) { + if (WARN_ON(!mclist)) + break; + mchash |= 1ULL << (mclist->dmi_addr[5] >> 2); + mclist = mclist->next; + } + ar->want_mc_hash = mchash; + } + ar->filter_changed |= AR9170_FILTER_CHANGED_MULTICAST; + } + + if (changed_flags & FIF_CONTROL) { + u32 filter = AR9170_MAC_REG_FTF_PSPOLL | + AR9170_MAC_REG_FTF_RTS | + AR9170_MAC_REG_FTF_CTS | + AR9170_MAC_REG_FTF_ACK | + AR9170_MAC_REG_FTF_CFE | + AR9170_MAC_REG_FTF_CFE_ACK; + + if (*new_flags & FIF_CONTROL) + ar->want_filter = ar->cur_filter | filter; + else + ar->want_filter = ar->cur_filter & ~filter; + + ar->filter_changed |= AR9170_FILTER_CHANGED_FRAMEFILTER; + } + + if (changed_flags & FIF_PROMISC_IN_BSS) { + ar->sniffer_enabled = ((*new_flags) & FIF_PROMISC_IN_BSS) != 0; + ar->filter_changed |= AR9170_FILTER_CHANGED_PROMISC; + } + + if (likely(IS_STARTED(ar))) + queue_work(ar->hw->workqueue, &ar->filter_config_work); +} + +static void ar9170_op_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changed) +{ + struct ar9170 *ar = hw->priv; + int err = 0; + + mutex_lock(&ar->mutex); + + ar9170_regwrite_begin(ar); + + if (changed & BSS_CHANGED_ASSOC) { + ar->state = bss_conf->assoc ? AR9170_ASSOCIATED : ar->state; + +#ifndef CONFIG_AR9170_LEDS + /* enable assoc LED. */ + err = ar9170_set_leds_state(ar, bss_conf->assoc ? 2 : 0); +#endif /* CONFIG_AR9170_LEDS */ + } + + if (changed & BSS_CHANGED_HT) { + /* TODO */ + err = 0; + } + + if (changed & BSS_CHANGED_ERP_SLOT) { + u32 slottime = 20; + + if (bss_conf->use_short_slot) + slottime = 9; + + ar9170_regwrite(AR9170_MAC_REG_SLOT_TIME, slottime << 10); + } + + if (changed & BSS_CHANGED_BASIC_RATES) { + u32 cck, ofdm; + + if (hw->conf.channel->band == IEEE80211_BAND_5GHZ) { + ofdm = bss_conf->basic_rates; + cck = 0; + } else { + /* four cck rates */ + cck = bss_conf->basic_rates & 0xf; + ofdm = bss_conf->basic_rates >> 4; + } + ar9170_regwrite(AR9170_MAC_REG_BASIC_RATE, + ofdm << 8 | cck); + } + + ar9170_regwrite_finish(); + err = ar9170_regwrite_result(); + mutex_unlock(&ar->mutex); +} + +static u64 ar9170_op_get_tsf(struct ieee80211_hw *hw) +{ + struct ar9170 *ar = hw->priv; + int err; + u32 tsf_low; + u32 tsf_high; + u64 tsf; + + mutex_lock(&ar->mutex); + err = ar9170_read_reg(ar, AR9170_MAC_REG_TSF_L, &tsf_low); + if (!err) + err = ar9170_read_reg(ar, AR9170_MAC_REG_TSF_H, &tsf_high); + mutex_unlock(&ar->mutex); + + if (WARN_ON(err)) + return 0; + + tsf = tsf_high; + tsf = (tsf << 32) | tsf_low; + return tsf; +} + +static int ar9170_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, + struct ieee80211_vif *vif, struct ieee80211_sta *sta, + struct ieee80211_key_conf *key) +{ + struct ar9170 *ar = hw->priv; + int err = 0, i; + u8 ktype; + + if ((!ar->vif) || (ar->disable_offload)) + return -EOPNOTSUPP; + + switch (key->alg) { + case ALG_WEP: + if (key->keylen == LEN_WEP40) + ktype = AR9170_ENC_ALG_WEP64; + else + ktype = AR9170_ENC_ALG_WEP128; + break; + case ALG_TKIP: + ktype = AR9170_ENC_ALG_TKIP; + break; + case ALG_CCMP: + ktype = AR9170_ENC_ALG_AESCCMP; + break; + default: + return -EOPNOTSUPP; + } + + mutex_lock(&ar->mutex); + if (cmd == SET_KEY) { + if (unlikely(!IS_STARTED(ar))) { + err = -EOPNOTSUPP; + goto out; + } + + /* group keys need all-zeroes address */ + if (!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) + sta = NULL; + + if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) { + for (i = 0; i < 64; i++) + if (!(ar->usedkeys & BIT(i))) + break; + if (i == 64) { + ar->rx_software_decryption = true; + ar9170_set_operating_mode(ar); + err = -ENOSPC; + goto out; + } + } else { + i = 64 + key->keyidx; + } + + key->hw_key_idx = i; + + err = ar9170_upload_key(ar, i, sta ? sta->addr : NULL, ktype, 0, + key->key, min_t(u8, 16, key->keylen)); + if (err) + goto out; + + if (key->alg == ALG_TKIP) { + err = ar9170_upload_key(ar, i, sta ? sta->addr : NULL, + ktype, 1, key->key + 16, 16); + if (err) + goto out; + + /* + * hardware is not capable generating the MMIC + * for fragmented frames! + */ + key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; + } + + if (i < 64) + ar->usedkeys |= BIT(i); + + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + } else { + if (unlikely(!IS_STARTED(ar))) { + /* The device is gone... together with the key ;-) */ + err = 0; + goto out; + } + + err = ar9170_disable_key(ar, key->hw_key_idx); + if (err) + goto out; + + if (key->hw_key_idx < 64) { + ar->usedkeys &= ~BIT(key->hw_key_idx); + } else { + err = ar9170_upload_key(ar, key->hw_key_idx, NULL, + AR9170_ENC_ALG_NONE, 0, + NULL, 0); + if (err) + goto out; + + if (key->alg == ALG_TKIP) { + err = ar9170_upload_key(ar, key->hw_key_idx, + NULL, + AR9170_ENC_ALG_NONE, 1, + NULL, 0); + if (err) + goto out; + } + + } + } + + ar9170_regwrite_begin(ar); + ar9170_regwrite(AR9170_MAC_REG_ROLL_CALL_TBL_L, ar->usedkeys); + ar9170_regwrite(AR9170_MAC_REG_ROLL_CALL_TBL_H, ar->usedkeys >> 32); + ar9170_regwrite_finish(); + err = ar9170_regwrite_result(); + +out: + mutex_unlock(&ar->mutex); + + return err; +} + +static void ar9170_sta_notify(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + enum sta_notify_cmd cmd, + struct ieee80211_sta *sta) +{ + struct ar9170 *ar = hw->priv; + struct ar9170_sta_info *info = (void *) sta->drv_priv; + struct sk_buff *skb; + unsigned int i; + + switch (cmd) { + case STA_NOTIFY_ADD: + for (i = 0; i < ar->hw->queues; i++) + skb_queue_head_init(&info->tx_status[i]); + break; + + case STA_NOTIFY_REMOVE: + + /* + * transfer all outstanding frames that need a tx_status + * reports to the global tx_status queue + */ + + for (i = 0; i < ar->hw->queues; i++) { + while ((skb = skb_dequeue(&info->tx_status[i]))) { +#ifdef AR9170_QUEUE_DEBUG + printk(KERN_DEBUG "%s: queueing frame in " + "global tx_status queue =>\n", + wiphy_name(ar->hw->wiphy)); + + ar9170_print_txheader(ar, skb); +#endif /* AR9170_QUEUE_DEBUG */ + skb_queue_tail(&ar->global_tx_status, skb); + } + } + queue_delayed_work(ar->hw->workqueue, &ar->tx_status_janitor, + msecs_to_jiffies(100)); + break; + + default: + break; + } +} + +static int ar9170_get_stats(struct ieee80211_hw *hw, + struct ieee80211_low_level_stats *stats) +{ + struct ar9170 *ar = hw->priv; + u32 val; + int err; + + mutex_lock(&ar->mutex); + err = ar9170_read_reg(ar, AR9170_MAC_REG_TX_RETRY, &val); + ar->stats.dot11ACKFailureCount += val; + + memcpy(stats, &ar->stats, sizeof(*stats)); + mutex_unlock(&ar->mutex); + + return 0; +} + +static int ar9170_get_tx_stats(struct ieee80211_hw *hw, + struct ieee80211_tx_queue_stats *tx_stats) +{ + struct ar9170 *ar = hw->priv; + + spin_lock_bh(&ar->tx_stats_lock); + memcpy(tx_stats, ar->tx_stats, sizeof(tx_stats[0]) * hw->queues); + spin_unlock_bh(&ar->tx_stats_lock); + + return 0; +} + +static int ar9170_conf_tx(struct ieee80211_hw *hw, u16 queue, + const struct ieee80211_tx_queue_params *param) +{ + struct ar9170 *ar = hw->priv; + int ret; + + mutex_lock(&ar->mutex); + if ((param) && !(queue > ar->hw->queues)) { + memcpy(&ar->edcf[ar9170_qos_hwmap[queue]], + param, sizeof(*param)); + + ret = ar9170_set_qos(ar); + } else + ret = -EINVAL; + + mutex_unlock(&ar->mutex); + return ret; +} + +static const struct ieee80211_ops ar9170_ops = { + .start = ar9170_op_start, + .stop = ar9170_op_stop, + .tx = ar9170_op_tx, + .add_interface = ar9170_op_add_interface, + .remove_interface = ar9170_op_remove_interface, + .config = ar9170_op_config, + .config_interface = ar9170_op_config_interface, + .configure_filter = ar9170_op_configure_filter, + .conf_tx = ar9170_conf_tx, + .bss_info_changed = ar9170_op_bss_info_changed, + .get_tsf = ar9170_op_get_tsf, + .set_key = ar9170_set_key, + .sta_notify = ar9170_sta_notify, + .get_stats = ar9170_get_stats, + .get_tx_stats = ar9170_get_tx_stats, +}; + +void *ar9170_alloc(size_t priv_size) +{ + struct ieee80211_hw *hw; + struct ar9170 *ar; + int i; + + hw = ieee80211_alloc_hw(priv_size, &ar9170_ops); + if (!hw) + return ERR_PTR(-ENOMEM); + + ar = hw->priv; + ar->hw = hw; + + mutex_init(&ar->mutex); + spin_lock_init(&ar->cmdlock); + spin_lock_init(&ar->tx_stats_lock); + skb_queue_head_init(&ar->global_tx_status); + skb_queue_head_init(&ar->global_tx_status_waste); + INIT_WORK(&ar->filter_config_work, ar9170_set_filters); + INIT_WORK(&ar->beacon_work, ar9170_new_beacon); + INIT_DELAYED_WORK(&ar->tx_status_janitor, ar9170_tx_status_janitor); + + /* all hw supports 2.4 GHz, so set channel to 1 by default */ + ar->channel = &ar9170_2ghz_chantable[0]; + + /* first part of wiphy init */ + ar->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_WDS) | + BIT(NL80211_IFTYPE_ADHOC); + ar->hw->flags |= IEEE80211_HW_RX_INCLUDES_FCS | + IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | + IEEE80211_HW_SIGNAL_DBM | + IEEE80211_HW_NOISE_DBM; + + ar->hw->queues = __AR9170_NUM_TXQ; + ar->hw->extra_tx_headroom = 8; + ar->hw->sta_data_size = sizeof(struct ar9170_sta_info); + + ar->hw->max_rates = 1; + ar->hw->max_rate_tries = 3; + + for (i = 0; i < ARRAY_SIZE(ar->noise); i++) + ar->noise[i] = -95; /* ATH_DEFAULT_NOISE_FLOOR */ + + return ar; +} + +static int ar9170_read_eeprom(struct ar9170 *ar) +{ +#define RW 8 /* number of words to read at once */ +#define RB (sizeof(u32) * RW) + DECLARE_MAC_BUF(mbuf); + u8 *eeprom = (void *)&ar->eeprom; + u8 *addr = ar->eeprom.mac_address; + __le32 offsets[RW]; + int i, j, err, bands = 0; + + BUILD_BUG_ON(sizeof(ar->eeprom) & 3); + + BUILD_BUG_ON(RB > AR9170_MAX_CMD_LEN - 4); +#ifndef __CHECKER__ + /* don't want to handle trailing remains */ + BUILD_BUG_ON(sizeof(ar->eeprom) % RB); +#endif + + for (i = 0; i < sizeof(ar->eeprom)/RB; i++) { + for (j = 0; j < RW; j++) + offsets[j] = cpu_to_le32(AR9170_EEPROM_START + + RB * i + 4 * j); + + err = ar->exec_cmd(ar, AR9170_CMD_RREG, + RB, (u8 *) &offsets, + RB, eeprom + RB * i); + if (err) + return err; + } + +#undef RW +#undef RB + + if (ar->eeprom.length == cpu_to_le16(0xFFFF)) + return -ENODATA; + + if (ar->eeprom.operating_flags & AR9170_OPFLAG_2GHZ) { + ar->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &ar9170_band_2GHz; + bands++; + } + if (ar->eeprom.operating_flags & AR9170_OPFLAG_5GHZ) { + ar->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &ar9170_band_5GHz; + bands++; + } + /* + * I measured this, a bandswitch takes roughly + * 135 ms and a frequency switch about 80. + * + * FIXME: measure these values again once EEPROM settings + * are used, that will influence them! + */ + if (bands == 2) + ar->hw->channel_change_time = 135 * 1000; + else + ar->hw->channel_change_time = 80 * 1000; + + /* second part of wiphy init */ + SET_IEEE80211_PERM_ADDR(ar->hw, addr); + + return bands ? 0 : -EINVAL; +} + +int ar9170_register(struct ar9170 *ar, struct device *pdev) +{ + int err; + + /* try to read EEPROM, init MAC addr */ + err = ar9170_read_eeprom(ar); + if (err) + goto err_out; + + err = ieee80211_register_hw(ar->hw); + if (err) + goto err_out; + + err = ar9170_init_leds(ar); + if (err) + goto err_unreg; + +#ifdef CONFIG_AR9170_LEDS + err = ar9170_register_leds(ar); + if (err) + goto err_unreg; +#endif /* CONFIG_AR9170_LEDS */ + + dev_info(pdev, "Atheros AR9170 is registered as '%s'\n", + wiphy_name(ar->hw->wiphy)); + + return err; + +err_unreg: + ieee80211_unregister_hw(ar->hw); + +err_out: + return err; +} + +void ar9170_unregister(struct ar9170 *ar) +{ +#ifdef CONFIG_AR9170_LEDS + ar9170_unregister_leds(ar); +#endif /* CONFIG_AR9170_LEDS */ + + ieee80211_unregister_hw(ar->hw); + mutex_destroy(&ar->mutex); +} diff --git a/drivers/net/wireless/ar9170/phy.c b/drivers/net/wireless/ar9170/phy.c new file mode 100644 index 00000000000..6ce20754b8e --- /dev/null +++ b/drivers/net/wireless/ar9170/phy.c @@ -0,0 +1,1240 @@ +/* + * Atheros AR9170 driver + * + * PHY and RF code + * + * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, see + * http://www.gnu.org/licenses/. + * + * This file incorporates work covered by the following copyright and + * permission notice: + * Copyright (c) 2007-2008 Atheros Communications, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include <linux/bitrev.h> +#include "ar9170.h" +#include "cmd.h" + +static int ar9170_init_power_cal(struct ar9170 *ar) +{ + ar9170_regwrite_begin(ar); + + ar9170_regwrite(0x1bc000 + 0x993c, 0x7f); + ar9170_regwrite(0x1bc000 + 0x9934, 0x3f3f3f3f); + ar9170_regwrite(0x1bc000 + 0x9938, 0x3f3f3f3f); + ar9170_regwrite(0x1bc000 + 0xa234, 0x3f3f3f3f); + ar9170_regwrite(0x1bc000 + 0xa238, 0x3f3f3f3f); + ar9170_regwrite(0x1bc000 + 0xa38c, 0x3f3f3f3f); + ar9170_regwrite(0x1bc000 + 0xa390, 0x3f3f3f3f); + ar9170_regwrite(0x1bc000 + 0xa3cc, 0x3f3f3f3f); + ar9170_regwrite(0x1bc000 + 0xa3d0, 0x3f3f3f3f); + ar9170_regwrite(0x1bc000 + 0xa3d4, 0x3f3f3f3f); + + ar9170_regwrite_finish(); + return ar9170_regwrite_result(); +} + +struct ar9170_phy_init { + u32 reg, _5ghz_20, _5ghz_40, _2ghz_40, _2ghz_20; +}; + +static struct ar9170_phy_init ar5416_phy_init[] = { + { 0x1c5800, 0x00000007, 0x00000007, 0x00000007, 0x00000007, }, + { 0x1c5804, 0x00000300, 0x000003c4, 0x000003c4, 0x00000300, }, + { 0x1c5808, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c580c, 0xad848e19, 0xad848e19, 0xad848e19, 0xad848e19, }, + { 0x1c5810, 0x7d14e000, 0x7d14e000, 0x7d14e000, 0x7d14e000, }, + { 0x1c5814, 0x9c0a9f6b, 0x9c0a9f6b, 0x9c0a9f6b, 0x9c0a9f6b, }, + { 0x1c5818, 0x00000090, 0x00000090, 0x00000090, 0x00000090, }, + { 0x1c581c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5820, 0x02020200, 0x02020200, 0x02020200, 0x02020200, }, + { 0x1c5824, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, }, + { 0x1c5828, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001, }, + { 0x1c582c, 0x0000a000, 0x0000a000, 0x0000a000, 0x0000a000, }, + { 0x1c5830, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5834, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, }, + { 0x1c5838, 0x00000007, 0x00000007, 0x00000007, 0x00000007, }, + { 0x1c583c, 0x00200400, 0x00200400, 0x00200400, 0x00200400, }, + { 0x1c5840, 0x206a002e, 0x206a002e, 0x206a002e, 0x206a002e, }, + { 0x1c5844, 0x1372161e, 0x13721c1e, 0x13721c24, 0x137216a4, }, + { 0x1c5848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, }, + { 0x1c584c, 0x1284233c, 0x1284233c, 0x1284233c, 0x1284233c, }, + { 0x1c5850, 0x6c48b4e4, 0x6c48b4e4, 0x6c48b0e4, 0x6c48b0e4, }, + { 0x1c5854, 0x00000859, 0x00000859, 0x00000859, 0x00000859, }, + { 0x1c5858, 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e, }, + { 0x1c585c, 0x31395c5e, 0x31395c5e, 0x31395c5e, 0x31395c5e, }, + { 0x1c5860, 0x0004dd10, 0x0004dd10, 0x0004dd20, 0x0004dd20, }, + { 0x1c5868, 0x409a4190, 0x409a4190, 0x409a4190, 0x409a4190, }, + { 0x1c586c, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, }, + { 0x1c5900, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5904, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5908, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c590c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5914, 0x000007d0, 0x000007d0, 0x00000898, 0x00000898, }, + { 0x1c5918, 0x00000118, 0x00000230, 0x00000268, 0x00000134, }, + { 0x1c591c, 0x10000fff, 0x10000fff, 0x10000fff, 0x10000fff, }, + { 0x1c5920, 0x0510081c, 0x0510081c, 0x0510001c, 0x0510001c, }, + { 0x1c5924, 0xd0058a15, 0xd0058a15, 0xd0058a15, 0xd0058a15, }, + { 0x1c5928, 0x00000001, 0x00000001, 0x00000001, 0x00000001, }, + { 0x1c592c, 0x00000004, 0x00000004, 0x00000004, 0x00000004, }, + { 0x1c5934, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, }, + { 0x1c5938, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, }, + { 0x1c593c, 0x0000007f, 0x0000007f, 0x0000007f, 0x0000007f, }, + { 0x1c5944, 0xdfb81020, 0xdfb81020, 0xdfb81020, 0xdfb81020, }, + { 0x1c5948, 0x9280b212, 0x9280b212, 0x9280b212, 0x9280b212, }, + { 0x1c594c, 0x00020028, 0x00020028, 0x00020028, 0x00020028, }, + { 0x1c5954, 0x5d50e188, 0x5d50e188, 0x5d50e188, 0x5d50e188, }, + { 0x1c5958, 0x00081fff, 0x00081fff, 0x00081fff, 0x00081fff, }, + { 0x1c5960, 0x00009b40, 0x00009b40, 0x00009b40, 0x00009b40, }, + { 0x1c5964, 0x00001120, 0x00001120, 0x00001120, 0x00001120, }, + { 0x1c5970, 0x190fb515, 0x190fb515, 0x190fb515, 0x190fb515, }, + { 0x1c5974, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5978, 0x00000001, 0x00000001, 0x00000001, 0x00000001, }, + { 0x1c597c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5980, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5984, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5988, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c598c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5990, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5994, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5998, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c599c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c59a0, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c59a4, 0x00000007, 0x00000007, 0x00000007, 0x00000007, }, + { 0x1c59a8, 0x001fff00, 0x001fff00, 0x001fff00, 0x001fff00, }, + { 0x1c59ac, 0x006f00c4, 0x006f00c4, 0x006f00c4, 0x006f00c4, }, + { 0x1c59b0, 0x03051000, 0x03051000, 0x03051000, 0x03051000, }, + { 0x1c59b4, 0x00000820, 0x00000820, 0x00000820, 0x00000820, }, + { 0x1c59c0, 0x038919be, 0x038919be, 0x038919be, 0x038919be, }, + { 0x1c59c4, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77, }, + { 0x1c59c8, 0x60f6532c, 0x60f6532c, 0x60f6532c, 0x60f6532c, }, + { 0x1c59cc, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8, }, + { 0x1c59d0, 0x00046384, 0x00046384, 0x00046384, 0x00046384, }, + { 0x1c59d4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c59d8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c59dc, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c59e0, 0x00000200, 0x00000200, 0x00000200, 0x00000200, }, + { 0x1c59e4, 0x64646464, 0x64646464, 0x64646464, 0x64646464, }, + { 0x1c59e8, 0x3c787878, 0x3c787878, 0x3c787878, 0x3c787878, }, + { 0x1c59ec, 0x000000aa, 0x000000aa, 0x000000aa, 0x000000aa, }, + { 0x1c59f0, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c59fc, 0x00001042, 0x00001042, 0x00001042, 0x00001042, }, + { 0x1c5a00, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5a04, 0x00000040, 0x00000040, 0x00000040, 0x00000040, }, + { 0x1c5a08, 0x00000080, 0x00000080, 0x00000080, 0x00000080, }, + { 0x1c5a0c, 0x000001a1, 0x000001a1, 0x00000141, 0x00000141, }, + { 0x1c5a10, 0x000001e1, 0x000001e1, 0x00000181, 0x00000181, }, + { 0x1c5a14, 0x00000021, 0x00000021, 0x000001c1, 0x000001c1, }, + { 0x1c5a18, 0x00000061, 0x00000061, 0x00000001, 0x00000001, }, + { 0x1c5a1c, 0x00000168, 0x00000168, 0x00000041, 0x00000041, }, + { 0x1c5a20, 0x000001a8, 0x000001a8, 0x000001a8, 0x000001a8, }, + { 0x1c5a24, 0x000001e8, 0x000001e8, 0x000001e8, 0x000001e8, }, + { 0x1c5a28, 0x00000028, 0x00000028, 0x00000028, 0x00000028, }, + { 0x1c5a2c, 0x00000068, 0x00000068, 0x00000068, 0x00000068, }, + { 0x1c5a30, 0x00000189, 0x00000189, 0x000000a8, 0x000000a8, }, + { 0x1c5a34, 0x000001c9, 0x000001c9, 0x00000169, 0x00000169, }, + { 0x1c5a38, 0x00000009, 0x00000009, 0x000001a9, 0x000001a9, }, + { 0x1c5a3c, 0x00000049, 0x00000049, 0x000001e9, 0x000001e9, }, + { 0x1c5a40, 0x00000089, 0x00000089, 0x00000029, 0x00000029, }, + { 0x1c5a44, 0x00000170, 0x00000170, 0x00000069, 0x00000069, }, + { 0x1c5a48, 0x000001b0, 0x000001b0, 0x00000190, 0x00000190, }, + { 0x1c5a4c, 0x000001f0, 0x000001f0, 0x000001d0, 0x000001d0, }, + { 0x1c5a50, 0x00000030, 0x00000030, 0x00000010, 0x00000010, }, + { 0x1c5a54, 0x00000070, 0x00000070, 0x00000050, 0x00000050, }, + { 0x1c5a58, 0x00000191, 0x00000191, 0x00000090, 0x00000090, }, + { 0x1c5a5c, 0x000001d1, 0x000001d1, 0x00000151, 0x00000151, }, + { 0x1c5a60, 0x00000011, 0x00000011, 0x00000191, 0x00000191, }, + { 0x1c5a64, 0x00000051, 0x00000051, 0x000001d1, 0x000001d1, }, + { 0x1c5a68, 0x00000091, 0x00000091, 0x00000011, 0x00000011, }, + { 0x1c5a6c, 0x000001b8, 0x000001b8, 0x00000051, 0x00000051, }, + { 0x1c5a70, 0x000001f8, 0x000001f8, 0x00000198, 0x00000198, }, + { 0x1c5a74, 0x00000038, 0x00000038, 0x000001d8, 0x000001d8, }, + { 0x1c5a78, 0x00000078, 0x00000078, 0x00000018, 0x00000018, }, + { 0x1c5a7c, 0x00000199, 0x00000199, 0x00000058, 0x00000058, }, + { 0x1c5a80, 0x000001d9, 0x000001d9, 0x00000098, 0x00000098, }, + { 0x1c5a84, 0x00000019, 0x00000019, 0x00000159, 0x00000159, }, + { 0x1c5a88, 0x00000059, 0x00000059, 0x00000199, 0x00000199, }, + { 0x1c5a8c, 0x00000099, 0x00000099, 0x000001d9, 0x000001d9, }, + { 0x1c5a90, 0x000000d9, 0x000000d9, 0x00000019, 0x00000019, }, + { 0x1c5a94, 0x000000f9, 0x000000f9, 0x00000059, 0x00000059, }, + { 0x1c5a98, 0x000000f9, 0x000000f9, 0x00000099, 0x00000099, }, + { 0x1c5a9c, 0x000000f9, 0x000000f9, 0x000000d9, 0x000000d9, }, + { 0x1c5aa0, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, }, + { 0x1c5aa4, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, }, + { 0x1c5aa8, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, }, + { 0x1c5aac, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, }, + { 0x1c5ab0, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, }, + { 0x1c5ab4, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, }, + { 0x1c5ab8, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, }, + { 0x1c5abc, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, }, + { 0x1c5ac0, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, }, + { 0x1c5ac4, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, }, + { 0x1c5ac8, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, }, + { 0x1c5acc, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, }, + { 0x1c5ad0, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, }, + { 0x1c5ad4, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, }, + { 0x1c5ad8, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, }, + { 0x1c5adc, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, }, + { 0x1c5ae0, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, }, + { 0x1c5ae4, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, }, + { 0x1c5ae8, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, }, + { 0x1c5aec, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, }, + { 0x1c5af0, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, }, + { 0x1c5af4, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, }, + { 0x1c5af8, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, }, + { 0x1c5afc, 0x000000f9, 0x000000f9, 0x000000f9, 0x000000f9, }, + { 0x1c5b00, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5b04, 0x00000001, 0x00000001, 0x00000001, 0x00000001, }, + { 0x1c5b08, 0x00000002, 0x00000002, 0x00000002, 0x00000002, }, + { 0x1c5b0c, 0x00000003, 0x00000003, 0x00000003, 0x00000003, }, + { 0x1c5b10, 0x00000004, 0x00000004, 0x00000004, 0x00000004, }, + { 0x1c5b14, 0x00000005, 0x00000005, 0x00000005, 0x00000005, }, + { 0x1c5b18, 0x00000008, 0x00000008, 0x00000008, 0x00000008, }, + { 0x1c5b1c, 0x00000009, 0x00000009, 0x00000009, 0x00000009, }, + { 0x1c5b20, 0x0000000a, 0x0000000a, 0x0000000a, 0x0000000a, }, + { 0x1c5b24, 0x0000000b, 0x0000000b, 0x0000000b, 0x0000000b, }, + { 0x1c5b28, 0x0000000c, 0x0000000c, 0x0000000c, 0x0000000c, }, + { 0x1c5b2c, 0x0000000d, 0x0000000d, 0x0000000d, 0x0000000d, }, + { 0x1c5b30, 0x00000010, 0x00000010, 0x00000010, 0x00000010, }, + { 0x1c5b34, 0x00000011, 0x00000011, 0x00000011, 0x00000011, }, + { 0x1c5b38, 0x00000012, 0x00000012, 0x00000012, 0x00000012, }, + { 0x1c5b3c, 0x00000013, 0x00000013, 0x00000013, 0x00000013, }, + { 0x1c5b40, 0x00000014, 0x00000014, 0x00000014, 0x00000014, }, + { 0x1c5b44, 0x00000015, 0x00000015, 0x00000015, 0x00000015, }, + { 0x1c5b48, 0x00000018, 0x00000018, 0x00000018, 0x00000018, }, + { 0x1c5b4c, 0x00000019, 0x00000019, 0x00000019, 0x00000019, }, + { 0x1c5b50, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a, }, + { 0x1c5b54, 0x0000001b, 0x0000001b, 0x0000001b, 0x0000001b, }, + { 0x1c5b58, 0x0000001c, 0x0000001c, 0x0000001c, 0x0000001c, }, + { 0x1c5b5c, 0x0000001d, 0x0000001d, 0x0000001d, 0x0000001d, }, + { 0x1c5b60, 0x00000020, 0x00000020, 0x00000020, 0x00000020, }, + { 0x1c5b64, 0x00000021, 0x00000021, 0x00000021, 0x00000021, }, + { 0x1c5b68, 0x00000022, 0x00000022, 0x00000022, 0x00000022, }, + { 0x1c5b6c, 0x00000023, 0x00000023, 0x00000023, 0x00000023, }, + { 0x1c5b70, 0x00000024, 0x00000024, 0x00000024, 0x00000024, }, + { 0x1c5b74, 0x00000025, 0x00000025, 0x00000025, 0x00000025, }, + { 0x1c5b78, 0x00000028, 0x00000028, 0x00000028, 0x00000028, }, + { 0x1c5b7c, 0x00000029, 0x00000029, 0x00000029, 0x00000029, }, + { 0x1c5b80, 0x0000002a, 0x0000002a, 0x0000002a, 0x0000002a, }, + { 0x1c5b84, 0x0000002b, 0x0000002b, 0x0000002b, 0x0000002b, }, + { 0x1c5b88, 0x0000002c, 0x0000002c, 0x0000002c, 0x0000002c, }, + { 0x1c5b8c, 0x0000002d, 0x0000002d, 0x0000002d, 0x0000002d, }, + { 0x1c5b90, 0x00000030, 0x00000030, 0x00000030, 0x00000030, }, + { 0x1c5b94, 0x00000031, 0x00000031, 0x00000031, 0x00000031, }, + { 0x1c5b98, 0x00000032, 0x00000032, 0x00000032, 0x00000032, }, + { 0x1c5b9c, 0x00000033, 0x00000033, 0x00000033, 0x00000033, }, + { 0x1c5ba0, 0x00000034, 0x00000034, 0x00000034, 0x00000034, }, + { 0x1c5ba4, 0x00000035, 0x00000035, 0x00000035, 0x00000035, }, + { 0x1c5ba8, 0x00000035, 0x00000035, 0x00000035, 0x00000035, }, + { 0x1c5bac, 0x00000035, 0x00000035, 0x00000035, 0x00000035, }, + { 0x1c5bb0, 0x00000035, 0x00000035, 0x00000035, 0x00000035, }, + { 0x1c5bb4, 0x00000035, 0x00000035, 0x00000035, 0x00000035, }, + { 0x1c5bb8, 0x00000035, 0x00000035, 0x00000035, 0x00000035, }, + { 0x1c5bbc, 0x00000035, 0x00000035, 0x00000035, 0x00000035, }, + { 0x1c5bc0, 0x00000035, 0x00000035, 0x00000035, 0x00000035, }, + { 0x1c5bc4, 0x00000035, 0x00000035, 0x00000035, 0x00000035, }, + { 0x1c5bc8, 0x00000035, 0x00000035, 0x00000035, 0x00000035, }, + { 0x1c5bcc, 0x00000035, 0x00000035, 0x00000035, 0x00000035, }, + { 0x1c5bd0, 0x00000035, 0x00000035, 0x00000035, 0x00000035, }, + { 0x1c5bd4, 0x00000035, 0x00000035, 0x00000035, 0x00000035, }, + { 0x1c5bd8, 0x00000035, 0x00000035, 0x00000035, 0x00000035, }, + { 0x1c5bdc, 0x00000035, 0x00000035, 0x00000035, 0x00000035, }, + { 0x1c5be0, 0x00000035, 0x00000035, 0x00000035, 0x00000035, }, + { 0x1c5be4, 0x00000035, 0x00000035, 0x00000035, 0x00000035, }, + { 0x1c5be8, 0x00000035, 0x00000035, 0x00000035, 0x00000035, }, + { 0x1c5bec, 0x00000035, 0x00000035, 0x00000035, 0x00000035, }, + { 0x1c5bf0, 0x00000035, 0x00000035, 0x00000035, 0x00000035, }, + { 0x1c5bf4, 0x00000035, 0x00000035, 0x00000035, 0x00000035, }, + { 0x1c5bf8, 0x00000010, 0x00000010, 0x00000010, 0x00000010, }, + { 0x1c5bfc, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a, }, + { 0x1c5c00, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5c0c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5c10, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5c14, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5c18, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5c1c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5c20, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5c24, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5c28, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5c2c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5c30, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5c34, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5c38, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5c3c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5cf0, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5cf4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5cf8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c5cfc, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c6200, 0x00000008, 0x00000008, 0x0000000e, 0x0000000e, }, + { 0x1c6204, 0x00000440, 0x00000440, 0x00000440, 0x00000440, }, + { 0x1c6208, 0xd6be4788, 0xd6be4788, 0xd03e4788, 0xd03e4788, }, + { 0x1c620c, 0x012e8160, 0x012e8160, 0x012a8160, 0x012a8160, }, + { 0x1c6210, 0x40806333, 0x40806333, 0x40806333, 0x40806333, }, + { 0x1c6214, 0x00106c10, 0x00106c10, 0x00106c10, 0x00106c10, }, + { 0x1c6218, 0x009c4060, 0x009c4060, 0x009c4060, 0x009c4060, }, + { 0x1c621c, 0x1883800a, 0x1883800a, 0x1883800a, 0x1883800a, }, + { 0x1c6220, 0x018830c6, 0x018830c6, 0x018830c6, 0x018830c6, }, + { 0x1c6224, 0x00000400, 0x00000400, 0x00000400, 0x00000400, }, + { 0x1c6228, 0x000009b5, 0x000009b5, 0x000009b5, 0x000009b5, }, + { 0x1c622c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c6230, 0x00000108, 0x00000210, 0x00000210, 0x00000108, }, + { 0x1c6234, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, }, + { 0x1c6238, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, }, + { 0x1c623c, 0x13c889af, 0x13c889af, 0x13c889af, 0x13c889af, }, + { 0x1c6240, 0x38490a20, 0x38490a20, 0x38490a20, 0x38490a20, }, + { 0x1c6244, 0x00007bb6, 0x00007bb6, 0x00007bb6, 0x00007bb6, }, + { 0x1c6248, 0x0fff3ffc, 0x0fff3ffc, 0x0fff3ffc, 0x0fff3ffc, }, + { 0x1c624c, 0x00000001, 0x00000001, 0x00000001, 0x00000001, }, + { 0x1c6250, 0x0000a000, 0x0000a000, 0x0000a000, 0x0000a000, }, + { 0x1c6254, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c6258, 0x0cc75380, 0x0cc75380, 0x0cc75380, 0x0cc75380, }, + { 0x1c625c, 0x0f0f0f01, 0x0f0f0f01, 0x0f0f0f01, 0x0f0f0f01, }, + { 0x1c6260, 0xdfa91f01, 0xdfa91f01, 0xdfa91f01, 0xdfa91f01, }, + { 0x1c6264, 0x00418a11, 0x00418a11, 0x00418a11, 0x00418a11, }, + { 0x1c6268, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c626c, 0x09249126, 0x09249126, 0x09249126, 0x09249126, }, + { 0x1c6274, 0x0a1a9caa, 0x0a1a9caa, 0x0a1a7caa, 0x0a1a7caa, }, + { 0x1c6278, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, }, + { 0x1c627c, 0x051701ce, 0x051701ce, 0x051701ce, 0x051701ce, }, + { 0x1c6300, 0x18010000, 0x18010000, 0x18010000, 0x18010000, }, + { 0x1c6304, 0x30032602, 0x30032602, 0x2e032402, 0x2e032402, }, + { 0x1c6308, 0x48073e06, 0x48073e06, 0x4a0a3c06, 0x4a0a3c06, }, + { 0x1c630c, 0x560b4c0a, 0x560b4c0a, 0x621a540b, 0x621a540b, }, + { 0x1c6310, 0x641a600f, 0x641a600f, 0x764f6c1b, 0x764f6c1b, }, + { 0x1c6314, 0x7a4f6e1b, 0x7a4f6e1b, 0x845b7a5a, 0x845b7a5a, }, + { 0x1c6318, 0x8c5b7e5a, 0x8c5b7e5a, 0x950f8ccf, 0x950f8ccf, }, + { 0x1c631c, 0x9d0f96cf, 0x9d0f96cf, 0xa5cf9b4f, 0xa5cf9b4f, }, + { 0x1c6320, 0xb51fa69f, 0xb51fa69f, 0xbddfaf1f, 0xbddfaf1f, }, + { 0x1c6324, 0xcb3fbd07, 0xcb3fbcbf, 0xd1ffc93f, 0xd1ffc93f, }, + { 0x1c6328, 0x0000d7bf, 0x0000d7bf, 0x00000000, 0x00000000, }, + { 0x1c632c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c6330, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c6334, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c6338, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c633c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c6340, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c6344, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c6348, 0x3fffffff, 0x3fffffff, 0x3fffffff, 0x3fffffff, }, + { 0x1c634c, 0x3fffffff, 0x3fffffff, 0x3fffffff, 0x3fffffff, }, + { 0x1c6350, 0x3fffffff, 0x3fffffff, 0x3fffffff, 0x3fffffff, }, + { 0x1c6354, 0x0003ffff, 0x0003ffff, 0x0003ffff, 0x0003ffff, }, + { 0x1c6358, 0x79a8aa1f, 0x79a8aa1f, 0x79a8aa1f, 0x79a8aa1f, }, + { 0x1c6388, 0x08000000, 0x08000000, 0x08000000, 0x08000000, }, + { 0x1c638c, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, }, + { 0x1c6390, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, }, + { 0x1c6394, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, }, + { 0x1c6398, 0x000001ce, 0x000001ce, 0x000001ce, 0x000001ce, }, + { 0x1c639c, 0x00000007, 0x00000007, 0x00000007, 0x00000007, }, + { 0x1c63a0, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c63a4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c63a8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c63ac, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c63b0, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c63b4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c63b8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c63bc, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c63c0, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c63c4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c63c8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c63cc, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, }, + { 0x1c63d0, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, }, + { 0x1c63d4, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, 0x3f3f3f3f, }, + { 0x1c63d8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, }, + { 0x1c63dc, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, }, + { 0x1c63e0, 0x000000c0, 0x000000c0, 0x000000c0, 0x000000c0, }, + { 0x1c6848, 0x00180a65, 0x00180a65, 0x00180a68, 0x00180a68, }, + { 0x1c6920, 0x0510001c, 0x0510001c, 0x0510001c, 0x0510001c, }, + { 0x1c6960, 0x00009b40, 0x00009b40, 0x00009b40, 0x00009b40, }, + { 0x1c720c, 0x012e8160, 0x012e8160, 0x012a8160, 0x012a8160, }, + { 0x1c726c, 0x09249126, 0x09249126, 0x09249126, 0x09249126, }, + { 0x1c7848, 0x00180a65, 0x00180a65, 0x00180a68, 0x00180a68, }, + { 0x1c7920, 0x0510001c, 0x0510001c, 0x0510001c, 0x0510001c, }, + { 0x1c7960, 0x00009b40, 0x00009b40, 0x00009b40, 0x00009b40, }, + { 0x1c820c, 0x012e8160, 0x012e8160, 0x012a8160, 0x012a8160, }, + { 0x1c826c, 0x09249126, 0x09249126, 0x09249126, 0x09249126, }, +/* { 0x1c8864, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00, }, */ + { 0x1c8864, 0x0001c600, 0x0001c600, 0x0001c600, 0x0001c600, }, + { 0x1c895c, 0x004b6a8e, 0x004b6a8e, 0x004b6a8e, 0x004b6a8e, }, + { 0x1c8968, 0x000003ce, 0x000003ce, 0x000003ce, 0x000003ce, }, + { 0x1c89bc, 0x00181400, 0x00181400, 0x00181400, 0x00181400, }, + { 0x1c9270, 0x00820820, 0x00820820, 0x00820820, 0x00820820, }, + { 0x1c935c, 0x066c420f, 0x066c420f, 0x066c420f, 0x066c420f, }, + { 0x1c9360, 0x0f282207, 0x0f282207, 0x0f282207, 0x0f282207, }, + { 0x1c9364, 0x17601685, 0x17601685, 0x17601685, 0x17601685, }, + { 0x1c9368, 0x1f801104, 0x1f801104, 0x1f801104, 0x1f801104, }, + { 0x1c936c, 0x37a00c03, 0x37a00c03, 0x37a00c03, 0x37a00c03, }, + { 0x1c9370, 0x3fc40883, 0x3fc40883, 0x3fc40883, 0x3fc40883, }, + { 0x1c9374, 0x57c00803, 0x57c00803, 0x57c00803, 0x57c00803, }, + { 0x1c9378, 0x5fd80682, 0x5fd80682, 0x5fd80682, 0x5fd80682, }, + { 0x1c937c, 0x7fe00482, 0x7fe00482, 0x7fe00482, 0x7fe00482, }, + { 0x1c9380, 0x7f3c7bba, 0x7f3c7bba, 0x7f3c7bba, 0x7f3c7bba, }, + { 0x1c9384, 0xf3307ff0, 0xf3307ff0, 0xf3307ff0, 0xf3307ff0, } +}; + +int ar9170_init_phy(struct ar9170 *ar, enum ieee80211_band band) +{ + int i, err; + u32 val; + bool is_2ghz = band == IEEE80211_BAND_2GHZ; + bool is_40mhz = false; /* XXX: for now */ + + ar9170_regwrite_begin(ar); + + for (i = 0; i < ARRAY_SIZE(ar5416_phy_init); i++) { + if (is_40mhz) { + if (is_2ghz) + val = ar5416_phy_init[i]._2ghz_40; + else + val = ar5416_phy_init[i]._5ghz_40; + } else { + if (is_2ghz) + val = ar5416_phy_init[i]._2ghz_20; + else + val = ar5416_phy_init[i]._5ghz_20; + } + + ar9170_regwrite(ar5416_phy_init[i].reg, val); + } + + ar9170_regwrite_finish(); + err = ar9170_regwrite_result(); + if (err) + return err; + + /* XXX: use EEPROM data here! */ + + err = ar9170_init_power_cal(ar); + if (err) + return err; + + /* XXX: remove magic! */ + if (is_2ghz) + err = ar9170_write_reg(ar, 0x1d4014, 0x5163); + else + err = ar9170_write_reg(ar, 0x1d4014, 0x5143); + + return err; +} + +struct ar9170_rf_init { + u32 reg, _5ghz, _2ghz; +}; + +static struct ar9170_rf_init ar9170_rf_init[] = { + /* bank 0 */ + { 0x1c58b0, 0x1e5795e5, 0x1e5795e5}, + { 0x1c58e0, 0x02008020, 0x02008020}, + /* bank 1 */ + { 0x1c58b0, 0x02108421, 0x02108421}, + { 0x1c58ec, 0x00000008, 0x00000008}, + /* bank 2 */ + { 0x1c58b0, 0x0e73ff17, 0x0e73ff17}, + { 0x1c58e0, 0x00000420, 0x00000420}, + /* bank 3 */ + { 0x1c58f0, 0x01400018, 0x01c00018}, + /* bank 4 */ + { 0x1c58b0, 0x000001a1, 0x000001a1}, + { 0x1c58e8, 0x00000001, 0x00000001}, + /* bank 5 */ + { 0x1c58b0, 0x00000013, 0x00000013}, + { 0x1c58e4, 0x00000002, 0x00000002}, + /* bank 6 */ + { 0x1c58b0, 0x00000000, 0x00000000}, + { 0x1c58b0, 0x00000000, 0x00000000}, + { 0x1c58b0, 0x00000000, 0x00000000}, + { 0x1c58b0, 0x00000000, 0x00000000}, + { 0x1c58b0, 0x00000000, 0x00000000}, + { 0x1c58b0, 0x00004000, 0x00004000}, + { 0x1c58b0, 0x00006c00, 0x00006c00}, + { 0x1c58b0, 0x00002c00, 0x00002c00}, + { 0x1c58b0, 0x00004800, 0x00004800}, + { 0x1c58b0, 0x00004000, 0x00004000}, + { 0x1c58b0, 0x00006000, 0x00006000}, + { 0x1c58b0, 0x00001000, 0x00001000}, + { 0x1c58b0, 0x00004000, 0x00004000}, + { 0x1c58b0, 0x00007c00, 0x00007c00}, + { 0x1c58b0, 0x00007c00, 0x00007c00}, + { 0x1c58b0, 0x00007c00, 0x00007c00}, + { 0x1c58b0, 0x00007c00, 0x00007c00}, + { 0x1c58b0, 0x00007c00, 0x00007c00}, + { 0x1c58b0, 0x00087c00, 0x00087c00}, + { 0x1c58b0, 0x00007c00, 0x00007c00}, + { 0x1c58b0, 0x00005400, 0x00005400}, + { 0x1c58b0, 0x00000c00, 0x00000c00}, + { 0x1c58b0, 0x00001800, 0x00001800}, + { 0x1c58b0, 0x00007c00, 0x00007c00}, + { 0x1c58b0, 0x00006c00, 0x00006c00}, + { 0x1c58b0, 0x00006c00, 0x00006c00}, + { 0x1c58b0, 0x00007c00, 0x00007c00}, + { 0x1c58b0, 0x00002c00, 0x00002c00}, + { 0x1c58b0, 0x00003c00, 0x00003c00}, + { 0x1c58b0, 0x00003800, 0x00003800}, + { 0x1c58b0, 0x00001c00, 0x00001c00}, + { 0x1c58b0, 0x00000800, 0x00000800}, + { 0x1c58b0, 0x00000408, 0x00000408}, + { 0x1c58b0, 0x00004c15, 0x00004c15}, + { 0x1c58b0, 0x00004188, 0x00004188}, + { 0x1c58b0, 0x0000201e, 0x0000201e}, + { 0x1c58b0, 0x00010408, 0x00010408}, + { 0x1c58b0, 0x00000801, 0x00000801}, + { 0x1c58b0, 0x00000c08, 0x00000c08}, + { 0x1c58b0, 0x0000181e, 0x0000181e}, + { 0x1c58b0, 0x00001016, 0x00001016}, + { 0x1c58b0, 0x00002800, 0x00002800}, + { 0x1c58b0, 0x00004010, 0x00004010}, + { 0x1c58b0, 0x0000081c, 0x0000081c}, + { 0x1c58b0, 0x00000115, 0x00000115}, + { 0x1c58b0, 0x00000015, 0x00000015}, + { 0x1c58b0, 0x00000066, 0x00000066}, + { 0x1c58b0, 0x0000001c, 0x0000001c}, + { 0x1c58b0, 0x00000000, 0x00000000}, + { 0x1c58b0, 0x00000004, 0x00000004}, + { 0x1c58b0, 0x00000015, 0x00000015}, + { 0x1c58b0, 0x0000001f, 0x0000001f}, + { 0x1c58e0, 0x00000000, 0x00000400}, + /* bank 7 */ + { 0x1c58b0, 0x000000a0, 0x000000a0}, + { 0x1c58b0, 0x00000000, 0x00000000}, + { 0x1c58b0, 0x00000040, 0x00000040}, + { 0x1c58f0, 0x0000001c, 0x0000001c}, +}; + +static int ar9170_init_rf_banks_0_7(struct ar9170 *ar, bool band5ghz) +{ + int err, i; + + ar9170_regwrite_begin(ar); + + for (i = 0; i < ARRAY_SIZE(ar9170_rf_init); i++) + ar9170_regwrite(ar9170_rf_init[i].reg, + band5ghz ? ar9170_rf_init[i]._5ghz + : ar9170_rf_init[i]._2ghz); + + ar9170_regwrite_finish(); + err = ar9170_regwrite_result(); + if (err) + printk(KERN_ERR "%s: rf init failed\n", + wiphy_name(ar->hw->wiphy)); + return err; +} + +static int ar9170_init_rf_bank4_pwr(struct ar9170 *ar, bool band5ghz, + u32 freq, enum ar9170_bw bw) +{ + int err; + u32 d0, d1, td0, td1, fd0, fd1; + u8 chansel; + u8 refsel0 = 1, refsel1 = 0; + u8 lf_synth = 0; + + switch (bw) { + case AR9170_BW_40_ABOVE: + freq += 10; + break; + case AR9170_BW_40_BELOW: + freq -= 10; + break; + case AR9170_BW_20: + break; + case __AR9170_NUM_BW: + BUG(); + } + + if (band5ghz) { + if (freq % 10) { + chansel = (freq - 4800) / 5; + } else { + chansel = ((freq - 4800) / 10) * 2; + refsel0 = 0; + refsel1 = 1; + } + chansel = byte_rev_table[chansel]; + } else { + if (freq == 2484) { + chansel = 10 + (freq - 2274) / 5; + lf_synth = 1; + } else + chansel = 16 + (freq - 2272) / 5; + chansel *= 4; + chansel = byte_rev_table[chansel]; + } + + d1 = chansel; + d0 = 0x21 | + refsel0 << 3 | + refsel1 << 2 | + lf_synth << 1; + td0 = d0 & 0x1f; + td1 = d1 & 0x1f; + fd0 = td1 << 5 | td0; + + td0 = (d0 >> 5) & 0x7; + td1 = (d1 >> 5) & 0x7; + fd1 = td1 << 5 | td0; + + ar9170_regwrite_begin(ar); + + ar9170_regwrite(0x1c58b0, fd0); + ar9170_regwrite(0x1c58e8, fd1); + + ar9170_regwrite_finish(); + err = ar9170_regwrite_result(); + if (err) + return err; + + msleep(10); + + return 0; +} + +struct ar9170_phy_freq_params { + u8 coeff_exp; + u16 coeff_man; + u8 coeff_exp_shgi; + u16 coeff_man_shgi; +}; + +struct ar9170_phy_freq_entry { + u16 freq; + struct ar9170_phy_freq_params params[__AR9170_NUM_BW]; +}; + +/* NB: must be in sync with channel tables in main! */ +static const struct ar9170_phy_freq_entry ar9170_phy_freq_params[] = { +/* + * freq, + * 20MHz, + * 40MHz (below), + * 40Mhz (above), + */ + { 2412, { + { 3, 21737, 3, 19563, }, + { 3, 21827, 3, 19644, }, + { 3, 21647, 3, 19482, }, + } }, + { 2417, { + { 3, 21692, 3, 19523, }, + { 3, 21782, 3, 19604, }, + { 3, 21602, 3, 19442, }, + } }, + { 2422, { + { 3, 21647, 3, 19482, }, + { 3, 21737, 3, 19563, }, + { 3, 21558, 3, 19402, }, + } }, + { 2427, { + { 3, 21602, 3, 19442, }, + { 3, 21692, 3, 19523, }, + { 3, 21514, 3, 19362, }, + } }, + { 2432, { + { 3, 21558, 3, 19402, }, + { 3, 21647, 3, 19482, }, + { 3, 21470, 3, 19323, }, + } }, + { 2437, { + { 3, 21514, 3, 19362, }, + { 3, 21602, 3, 19442, }, + { 3, 21426, 3, 19283, }, + } }, + { 2442, { + { 3, 21470, 3, 19323, }, + { 3, 21558, 3, 19402, }, + { 3, 21382, 3, 19244, }, + } }, + { 2447, { + { 3, 21426, 3, 19283, }, + { 3, 21514, 3, 19362, }, + { 3, 21339, 3, 19205, }, + } }, + { 2452, { + { 3, 21382, 3, 19244, }, + { 3, 21470, 3, 19323, }, + { 3, 21295, 3, 19166, }, + } }, + { 2457, { + { 3, 21339, 3, 19205, }, + { 3, 21426, 3, 19283, }, + { 3, 21252, 3, 19127, }, + } }, + { 2462, { + { 3, 21295, 3, 19166, }, + { 3, 21382, 3, 19244, }, + { 3, 21209, 3, 19088, }, + } }, + { 2467, { + { 3, 21252, 3, 19127, }, + { 3, 21339, 3, 19205, }, + { 3, 21166, 3, 19050, }, + } }, + { 2472, { + { 3, 21209, 3, 19088, }, + { 3, 21295, 3, 19166, }, + { 3, 21124, 3, 19011, }, + } }, + { 2484, { + { 3, 21107, 3, 18996, }, + { 3, 21192, 3, 19073, }, + { 3, 21022, 3, 18920, }, + } }, + { 4920, { + { 4, 21313, 4, 19181, }, + { 4, 21356, 4, 19220, }, + { 4, 21269, 4, 19142, }, + } }, + { 4940, { + { 4, 21226, 4, 19104, }, + { 4, 21269, 4, 19142, }, + { 4, 21183, 4, 19065, }, + } }, + { 4960, { + { 4, 21141, 4, 19027, }, + { 4, 21183, 4, 19065, }, + { 4, 21098, 4, 18988, }, + } }, + { 4980, { + { 4, 21056, 4, 18950, }, + { 4, 21098, 4, 18988, }, + { 4, 21014, 4, 18912, }, + } }, + { 5040, { + { 4, 20805, 4, 18725, }, + { 4, 20846, 4, 18762, }, + { 4, 20764, 4, 18687, }, + } }, + { 5060, { + { 4, 20723, 4, 18651, }, + { 4, 20764, 4, 18687, }, + { 4, 20682, 4, 18614, }, + } }, + { 5080, { + { 4, 20641, 4, 18577, }, + { 4, 20682, 4, 18614, }, + { 4, 20601, 4, 18541, }, + } }, + { 5180, { + { 4, 20243, 4, 18219, }, + { 4, 20282, 4, 18254, }, + { 4, 20204, 4, 18183, }, + } }, + { 5200, { + { 4, 20165, 4, 18148, }, + { 4, 20204, 4, 18183, }, + { 4, 20126, 4, 18114, }, + } }, + { 5220, { + { 4, 20088, 4, 18079, }, + { 4, 20126, 4, 18114, }, + { 4, 20049, 4, 18044, }, + } }, + { 5240, { + { 4, 20011, 4, 18010, }, + { 4, 20049, 4, 18044, }, + { 4, 19973, 4, 17976, }, + } }, + { 5260, { + { 4, 19935, 4, 17941, }, + { 4, 19973, 4, 17976, }, + { 4, 19897, 4, 17907, }, + } }, + { 5280, { + { 4, 19859, 4, 17873, }, + { 4, 19897, 4, 17907, }, + { 4, 19822, 4, 17840, }, + } }, + { 5300, { + { 4, 19784, 4, 17806, }, + { 4, 19822, 4, 17840, }, + { 4, 19747, 4, 17772, }, + } }, + { 5320, { + { 4, 19710, 4, 17739, }, + { 4, 19747, 4, 17772, }, + { 4, 19673, 4, 17706, }, + } }, + { 5500, { + { 4, 19065, 4, 17159, }, + { 4, 19100, 4, 17190, }, + { 4, 19030, 4, 17127, }, + } }, + { 5520, { + { 4, 18996, 4, 17096, }, + { 4, 19030, 4, 17127, }, + { 4, 18962, 4, 17065, }, + } }, + { 5540, { + { 4, 18927, 4, 17035, }, + { 4, 18962, 4, 17065, }, + { 4, 18893, 4, 17004, }, + } }, + { 5560, { + { 4, 18859, 4, 16973, }, + { 4, 18893, 4, 17004, }, + { 4, 18825, 4, 16943, }, + } }, + { 5580, { + { 4, 18792, 4, 16913, }, + { 4, 18825, 4, 16943, }, + { 4, 18758, 4, 16882, }, + } }, + { 5600, { + { 4, 18725, 4, 16852, }, + { 4, 18758, 4, 16882, }, + { 4, 18691, 4, 16822, }, + } }, + { 5620, { + { 4, 18658, 4, 16792, }, + { 4, 18691, 4, 16822, }, + { 4, 18625, 4, 16762, }, + } }, + { 5640, { + { 4, 18592, 4, 16733, }, + { 4, 18625, 4, 16762, }, + { 4, 18559, 4, 16703, }, + } }, + { 5660, { + { 4, 18526, 4, 16673, }, + { 4, 18559, 4, 16703, }, + { 4, 18493, 4, 16644, }, + } }, + { 5680, { + { 4, 18461, 4, 16615, }, + { 4, 18493, 4, 16644, }, + { 4, 18428, 4, 16586, }, + } }, + { 5700, { + { 4, 18396, 4, 16556, }, + { 4, 18428, 4, 16586, }, + { 4, 18364, 4, 16527, }, + } }, + { 5745, { + { 4, 18252, 4, 16427, }, + { 4, 18284, 4, 16455, }, + { 4, 18220, 4, 16398, }, + } }, + { 5765, { + { 4, 18189, 5, 32740, }, + { 4, 18220, 4, 16398, }, + { 4, 18157, 5, 32683, }, + } }, + { 5785, { + { 4, 18126, 5, 32626, }, + { 4, 18157, 5, 32683, }, + { 4, 18094, 5, 32570, }, + } }, + { 5805, { + { 4, 18063, 5, 32514, }, + { 4, 18094, 5, 32570, }, + { 4, 18032, 5, 32458, }, + } }, + { 5825, { + { 4, 18001, 5, 32402, }, + { 4, 18032, 5, 32458, }, + { 4, 17970, 5, 32347, }, + } }, + { 5170, { + { 4, 20282, 4, 18254, }, + { 4, 20321, 4, 18289, }, + { 4, 20243, 4, 18219, }, + } }, + { 5190, { + { 4, 20204, 4, 18183, }, + { 4, 20243, 4, 18219, }, + { 4, 20165, 4, 18148, }, + } }, + { 5210, { + { 4, 20126, 4, 18114, }, + { 4, 20165, 4, 18148, }, + { 4, 20088, 4, 18079, }, + } }, + { 5230, { + { 4, 20049, 4, 18044, }, + { 4, 20088, 4, 18079, }, + { 4, 20011, 4, 18010, }, + } }, +}; + +static const struct ar9170_phy_freq_params * +ar9170_get_hw_dyn_params(struct ieee80211_channel *channel, + enum ar9170_bw bw) +{ + unsigned int chanidx = 0; + u16 freq = 2412; + + if (channel) { + chanidx = channel->hw_value; + freq = channel->center_freq; + } + + BUG_ON(chanidx >= ARRAY_SIZE(ar9170_phy_freq_params)); + + BUILD_BUG_ON(__AR9170_NUM_BW != 3); + + WARN_ON(ar9170_phy_freq_params[chanidx].freq != freq); + + return &ar9170_phy_freq_params[chanidx].params[bw]; +} + + +int ar9170_init_rf(struct ar9170 *ar) +{ + const struct ar9170_phy_freq_params *freqpar; + __le32 cmd[7]; + int err; + + err = ar9170_init_rf_banks_0_7(ar, false); + if (err) + return err; + + err = ar9170_init_rf_bank4_pwr(ar, false, 2412, AR9170_BW_20); + if (err) + return err; + + freqpar = ar9170_get_hw_dyn_params(NULL, AR9170_BW_20); + + cmd[0] = cpu_to_le32(2412 * 1000); + cmd[1] = cpu_to_le32(0); + cmd[2] = cpu_to_le32(1); + cmd[3] = cpu_to_le32(freqpar->coeff_exp); + cmd[4] = cpu_to_le32(freqpar->coeff_man); + cmd[5] = cpu_to_le32(freqpar->coeff_exp_shgi); + cmd[6] = cpu_to_le32(freqpar->coeff_man_shgi); + + /* RF_INIT echoes the command back to us */ + err = ar->exec_cmd(ar, AR9170_CMD_RF_INIT, + sizeof(cmd), (u8 *)cmd, + sizeof(cmd), (u8 *)cmd); + if (err) + return err; + + msleep(1000); + + return ar9170_echo_test(ar, 0xaabbccdd); +} + +static int ar9170_find_freq_idx(int nfreqs, u8 *freqs, u8 f) +{ + int idx = nfreqs - 2; + + while (idx >= 0) { + if (f >= freqs[idx]) + return idx; + idx--; + } + + return 0; +} + +static s32 ar9170_interpolate_s32(s32 x, s32 x1, s32 y1, s32 x2, s32 y2) +{ + /* nothing to interpolate, it's horizontal */ + if (y2 == y1) + return y1; + + /* check if we hit one of the edges */ + if (x == x1) + return y1; + if (x == x2) + return y2; + + /* x1 == x2 is bad, hopefully == x */ + if (x2 == x1) + return y1; + + return y1 + (((y2 - y1) * (x - x1)) / (x2 - x1)); +} + +static u8 ar9170_interpolate_u8(u8 x, u8 x1, u8 y1, u8 x2, u8 y2) +{ +#define SHIFT 8 + s32 y; + + y = ar9170_interpolate_s32(x << SHIFT, + x1 << SHIFT, y1 << SHIFT, + x2 << SHIFT, y2 << SHIFT); + + /* + * XXX: unwrap this expression + * Isn't it just DIV_ROUND_UP(y, 1<<SHIFT)? + * Can we rely on the compiler to optimise away the div? + */ + return (y >> SHIFT) + ((y & (1<<(SHIFT-1))) >> (SHIFT - 1)); +#undef SHIFT +} + +static int ar9170_set_power_cal(struct ar9170 *ar, u32 freq, enum ar9170_bw bw) +{ + struct ar9170_calibration_target_power_legacy *ctpl; + struct ar9170_calibration_target_power_ht *ctph; + u8 *ctpres; + int ntargets; + int idx, i, n; + u8 ackpower, ackchains, f; + u8 pwr_freqs[AR5416_MAX_NUM_TGT_PWRS]; + + if (freq < 3000) + f = freq - 2300; + else + f = (freq - 4800)/5; + + /* + * cycle through the various modes + * + * legacy modes first: 5G, 2G CCK, 2G OFDM + */ + for (i = 0; i < 3; i++) { + switch (i) { + case 0: /* 5 GHz legacy */ + ctpl = &ar->eeprom.cal_tgt_pwr_5G[0]; + ntargets = AR5416_NUM_5G_TARGET_PWRS; + ctpres = ar->power_5G_leg; + break; + case 1: /* 2.4 GHz CCK */ + ctpl = &ar->eeprom.cal_tgt_pwr_2G_cck[0]; + ntargets = AR5416_NUM_2G_CCK_TARGET_PWRS; + ctpres = ar->power_2G_cck; + break; + case 2: /* 2.4 GHz OFDM */ + ctpl = &ar->eeprom.cal_tgt_pwr_2G_ofdm[0]; + ntargets = AR5416_NUM_2G_OFDM_TARGET_PWRS; + ctpres = ar->power_2G_ofdm; + break; + default: + BUG(); + } + + for (n = 0; n < ntargets; n++) { + if (ctpl[n].freq == 0xff) + break; + pwr_freqs[n] = ctpl[n].freq; + } + ntargets = n; + idx = ar9170_find_freq_idx(ntargets, pwr_freqs, f); + for (n = 0; n < 4; n++) + ctpres[n] = ar9170_interpolate_u8( + f, + ctpl[idx + 0].freq, + ctpl[idx + 0].power[n], + ctpl[idx + 1].freq, + ctpl[idx + 1].power[n]); + } + + /* + * HT modes now: 5G HT20, 5G HT40, 2G CCK, 2G OFDM, 2G HT20, 2G HT40 + */ + for (i = 0; i < 4; i++) { + switch (i) { + case 0: /* 5 GHz HT 20 */ + ctph = &ar->eeprom.cal_tgt_pwr_5G_ht20[0]; + ntargets = AR5416_NUM_5G_TARGET_PWRS; + ctpres = ar->power_5G_ht20; + break; + case 1: /* 5 GHz HT 40 */ + ctph = &ar->eeprom.cal_tgt_pwr_5G_ht40[0]; + ntargets = AR5416_NUM_5G_TARGET_PWRS; + ctpres = ar->power_5G_ht40; + break; + case 2: /* 2.4 GHz HT 20 */ + ctph = &ar->eeprom.cal_tgt_pwr_2G_ht20[0]; + ntargets = AR5416_NUM_2G_OFDM_TARGET_PWRS; + ctpres = ar->power_2G_ht20; + break; + case 3: /* 2.4 GHz HT 40 */ + ctph = &ar->eeprom.cal_tgt_pwr_2G_ht40[0]; + ntargets = AR5416_NUM_2G_OFDM_TARGET_PWRS; + ctpres = ar->power_2G_ht40; + break; + default: + BUG(); + } + + for (n = 0; n < ntargets; n++) { + if (ctph[n].freq == 0xff) + break; + pwr_freqs[n] = ctph[n].freq; + } + ntargets = n; + idx = ar9170_find_freq_idx(ntargets, pwr_freqs, f); + for (n = 0; n < 8; n++) + ctpres[n] = ar9170_interpolate_u8( + f, + ctph[idx + 0].freq, + ctph[idx + 0].power[n], + ctph[idx + 1].freq, + ctph[idx + 1].power[n]); + } + + /* set ACK/CTS TX power */ + ar9170_regwrite_begin(ar); + + if (ar->eeprom.tx_mask != 1) + ackchains = AR9170_TX_PHY_TXCHAIN_2; + else + ackchains = AR9170_TX_PHY_TXCHAIN_1; + + if (freq < 3000) + ackpower = ar->power_2G_ofdm[0] & 0x3f; + else + ackpower = ar->power_5G_leg[0] & 0x3f; + + ar9170_regwrite(0x1c3694, ackpower << 20 | ackchains << 26); + ar9170_regwrite(0x1c3bb4, ackpower << 5 | ackchains << 11 | + ackpower << 21 | ackchains << 27); + + ar9170_regwrite_finish(); + return ar9170_regwrite_result(); +} + +static int ar9170_calc_noise_dbm(u32 raw_noise) +{ + if (raw_noise & 0x100) + return ~((raw_noise & 0x0ff) >> 1); + else + return (raw_noise & 0xff) >> 1; +} + +int ar9170_set_channel(struct ar9170 *ar, struct ieee80211_channel *channel, + enum ar9170_rf_init_mode rfi, enum ar9170_bw bw) +{ + const struct ar9170_phy_freq_params *freqpar; + u32 cmd, tmp, offs; + __le32 vals[8]; + int i, err; + bool bandswitch; + + /* clear BB heavy clip enable */ + err = ar9170_write_reg(ar, 0x1c59e0, 0x200); + if (err) + return err; + + /* may be NULL at first setup */ + if (ar->channel) + bandswitch = ar->channel->band != channel->band; + else + bandswitch = true; + + /* HW workaround */ + if (!ar->hw->wiphy->bands[IEEE80211_BAND_5GHZ] && + channel->center_freq <= 2417) + bandswitch = true; + + err = ar->exec_cmd(ar, AR9170_CMD_FREQ_START, 0, NULL, 0, NULL); + if (err) + return err; + + if (rfi != AR9170_RFI_NONE || bandswitch) { + u32 val = 0x400; + + if (rfi == AR9170_RFI_COLD) + val = 0x800; + + /* warm/cold reset BB/ADDA */ + err = ar9170_write_reg(ar, 0x1d4004, val); + if (err) + return err; + + err = ar9170_write_reg(ar, 0x1d4004, 0x0); + if (err) + return err; + + err = ar9170_init_phy(ar, channel->band); + if (err) + return err; + + err = ar9170_init_rf_banks_0_7(ar, + channel->band == IEEE80211_BAND_5GHZ); + if (err) + return err; + + cmd = AR9170_CMD_RF_INIT; + } else { + cmd = AR9170_CMD_FREQUENCY; + } + + err = ar9170_init_rf_bank4_pwr(ar, + channel->band == IEEE80211_BAND_5GHZ, + channel->center_freq, bw); + if (err) + return err; + + switch (bw) { + case AR9170_BW_20: + tmp = 0x240; + offs = 0; + break; + case AR9170_BW_40_BELOW: + tmp = 0x2c4; + offs = 3; + break; + case AR9170_BW_40_ABOVE: + tmp = 0x2d4; + offs = 1; + break; + default: + BUG(); + return -ENOSYS; + } + + if (0 /* 2 streams capable */) + tmp |= 0x100; + + err = ar9170_write_reg(ar, 0x1c5804, tmp); + if (err) + return err; + + err = ar9170_set_power_cal(ar, channel->center_freq, bw); + if (err) + return err; + + freqpar = ar9170_get_hw_dyn_params(channel, bw); + + vals[0] = cpu_to_le32(channel->center_freq * 1000); + vals[1] = cpu_to_le32(bw == AR9170_BW_20 ? 0 : 1); + vals[2] = cpu_to_le32(offs << 2 | 1); + vals[3] = cpu_to_le32(freqpar->coeff_exp); + vals[4] = cpu_to_le32(freqpar->coeff_man); + vals[5] = cpu_to_le32(freqpar->coeff_exp_shgi); + vals[6] = cpu_to_le32(freqpar->coeff_man_shgi); + vals[7] = cpu_to_le32(1000); + + err = ar->exec_cmd(ar, cmd, sizeof(vals), (u8 *)vals, + sizeof(vals), (u8 *)vals); + if (err) + return err; + + for (i = 0; i < 2; i++) { + ar->noise[i] = ar9170_calc_noise_dbm( + (le32_to_cpu(vals[2 + i]) >> 19) & 0x1ff); + + ar->noise[i + 2] = ar9170_calc_noise_dbm( + (le32_to_cpu(vals[5 + i]) >> 23) & 0x1ff); + } + + ar->channel = channel; + return 0; +} diff --git a/drivers/net/wireless/ar9170/usb.c b/drivers/net/wireless/ar9170/usb.c new file mode 100644 index 00000000000..ad296840893 --- /dev/null +++ b/drivers/net/wireless/ar9170/usb.c @@ -0,0 +1,748 @@ +/* + * Atheros AR9170 driver + * + * USB - frontend + * + * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> + * Copyright 2009, Christian Lamparter <chunkeey@web.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, see + * http://www.gnu.org/licenses/. + * + * This file incorporates work covered by the following copyright and + * permission notice: + * Copyright (c) 2007-2008 Atheros Communications, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/firmware.h> +#include <linux/etherdevice.h> +#include <net/mac80211.h> +#include "ar9170.h" +#include "cmd.h" +#include "hw.h" +#include "usb.h" + +MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>"); +MODULE_AUTHOR("Christian Lamparter <chunkeey@web.de>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Atheros AR9170 802.11n USB wireless"); +MODULE_FIRMWARE("ar9170-1.fw"); +MODULE_FIRMWARE("ar9170-2.fw"); + +static struct usb_device_id ar9170_usb_ids[] = { + /* Atheros 9170 */ + { USB_DEVICE(0x0cf3, 0x9170) }, + /* Atheros TG121N */ + { USB_DEVICE(0x0cf3, 0x1001) }, + /* D-Link DWA 160A */ + { USB_DEVICE(0x07d1, 0x3c10) }, + /* Netgear WNDA3100 */ + { USB_DEVICE(0x0846, 0x9010) }, + /* Netgear WN111 v2 */ + { USB_DEVICE(0x0846, 0x9001) }, + /* Zydas ZD1221 */ + { USB_DEVICE(0x0ace, 0x1221) }, + /* Z-Com UB81 BG */ + { USB_DEVICE(0x0cde, 0x0023) }, + /* Z-Com UB82 ABG */ + { USB_DEVICE(0x0cde, 0x0026) }, + /* Arcadyan WN7512 */ + { USB_DEVICE(0x083a, 0xf522) }, + /* Planex GWUS300 */ + { USB_DEVICE(0x2019, 0x5304) }, + /* IO-Data WNGDNUS2 */ + { USB_DEVICE(0x04bb, 0x093f) }, + + /* terminate */ + {} +}; +MODULE_DEVICE_TABLE(usb, ar9170_usb_ids); + +static void ar9170_usb_tx_urb_complete_free(struct urb *urb) +{ + struct sk_buff *skb = urb->context; + struct ar9170_usb *aru = (struct ar9170_usb *) + usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0)); + + if (!aru) { + dev_kfree_skb_irq(skb); + return ; + } + + ar9170_handle_tx_status(&aru->common, skb, false, + AR9170_TX_STATUS_COMPLETE); +} + +static void ar9170_usb_tx_urb_complete(struct urb *urb) +{ +} + +static void ar9170_usb_irq_completed(struct urb *urb) +{ + struct ar9170_usb *aru = urb->context; + + switch (urb->status) { + /* everything is fine */ + case 0: + break; + + /* disconnect */ + case -ENOENT: + case -ECONNRESET: + case -ENODEV: + case -ESHUTDOWN: + goto free; + + default: + goto resubmit; + } + + print_hex_dump_bytes("ar9170 irq: ", DUMP_PREFIX_OFFSET, + urb->transfer_buffer, urb->actual_length); + +resubmit: + usb_anchor_urb(urb, &aru->rx_submitted); + if (usb_submit_urb(urb, GFP_ATOMIC)) { + usb_unanchor_urb(urb); + goto free; + } + + return; + +free: + usb_buffer_free(aru->udev, 64, urb->transfer_buffer, urb->transfer_dma); +} + +static void ar9170_usb_rx_completed(struct urb *urb) +{ + struct sk_buff *skb = urb->context; + struct ar9170_usb *aru = (struct ar9170_usb *) + usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0)); + int err; + + if (!aru) + goto free; + + switch (urb->status) { + /* everything is fine */ + case 0: + break; + + /* disconnect */ + case -ENOENT: + case -ECONNRESET: + case -ENODEV: + case -ESHUTDOWN: + goto free; + + default: + goto resubmit; + } + + skb_put(skb, urb->actual_length); + ar9170_rx(&aru->common, skb); + +resubmit: + skb_reset_tail_pointer(skb); + skb_trim(skb, 0); + + usb_anchor_urb(urb, &aru->rx_submitted); + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err) { + usb_unanchor_urb(urb); + dev_kfree_skb_irq(skb); + } + + return ; + +free: + dev_kfree_skb_irq(skb); + return; +} + +static int ar9170_usb_prep_rx_urb(struct ar9170_usb *aru, + struct urb *urb, gfp_t gfp) +{ + struct sk_buff *skb; + + skb = __dev_alloc_skb(AR9170_MAX_RX_BUFFER_SIZE + 32, gfp); + if (!skb) + return -ENOMEM; + + /* reserve some space for mac80211's radiotap */ + skb_reserve(skb, 32); + + usb_fill_bulk_urb(urb, aru->udev, + usb_rcvbulkpipe(aru->udev, AR9170_EP_RX), + skb->data, min(skb_tailroom(skb), + AR9170_MAX_RX_BUFFER_SIZE), + ar9170_usb_rx_completed, skb); + + return 0; +} + +static int ar9170_usb_alloc_rx_irq_urb(struct ar9170_usb *aru) +{ + struct urb *urb = NULL; + void *ibuf; + int err = -ENOMEM; + + /* initialize interrupt endpoint */ + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) + goto out; + + ibuf = usb_buffer_alloc(aru->udev, 64, GFP_KERNEL, &urb->transfer_dma); + if (!ibuf) + goto out; + + usb_fill_int_urb(urb, aru->udev, + usb_rcvintpipe(aru->udev, AR9170_EP_IRQ), ibuf, + 64, ar9170_usb_irq_completed, aru, 1); + urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + usb_anchor_urb(urb, &aru->rx_submitted); + err = usb_submit_urb(urb, GFP_KERNEL); + if (err) { + usb_unanchor_urb(urb); + usb_buffer_free(aru->udev, 64, urb->transfer_buffer, + urb->transfer_dma); + } + +out: + usb_free_urb(urb); + return err; +} + +static int ar9170_usb_alloc_rx_bulk_urbs(struct ar9170_usb *aru) +{ + struct urb *urb; + int i; + int err = -EINVAL; + + for (i = 0; i < AR9170_NUM_RX_URBS; i++) { + err = -ENOMEM; + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) + goto err_out; + + err = ar9170_usb_prep_rx_urb(aru, urb, GFP_KERNEL); + if (err) { + usb_free_urb(urb); + goto err_out; + } + + usb_anchor_urb(urb, &aru->rx_submitted); + err = usb_submit_urb(urb, GFP_KERNEL); + if (err) { + usb_unanchor_urb(urb); + dev_kfree_skb_any((void *) urb->transfer_buffer); + usb_free_urb(urb); + goto err_out; + } + usb_free_urb(urb); + } + + /* the device now waiting for a firmware. */ + aru->common.state = AR9170_IDLE; + return 0; + +err_out: + + usb_kill_anchored_urbs(&aru->rx_submitted); + return err; +} + +static void ar9170_usb_cancel_urbs(struct ar9170_usb *aru) +{ + int ret; + + aru->common.state = AR9170_UNKNOWN_STATE; + + usb_unlink_anchored_urbs(&aru->tx_submitted); + + /* give the LED OFF command and the deauth frame a chance to air. */ + ret = usb_wait_anchor_empty_timeout(&aru->tx_submitted, + msecs_to_jiffies(100)); + if (ret == 0) + dev_err(&aru->udev->dev, "kill pending tx urbs.\n"); + usb_poison_anchored_urbs(&aru->tx_submitted); + + usb_poison_anchored_urbs(&aru->rx_submitted); +} + +static int ar9170_usb_exec_cmd(struct ar9170 *ar, enum ar9170_cmd cmd, + unsigned int plen, void *payload, + unsigned int outlen, void *out) +{ + struct ar9170_usb *aru = (void *) ar; + struct urb *urb = NULL; + unsigned long flags; + int err = -ENOMEM; + + if (unlikely(!IS_ACCEPTING_CMD(ar))) + return -EPERM; + + if (WARN_ON(plen > AR9170_MAX_CMD_LEN - 4)) + return -EINVAL; + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (unlikely(!urb)) + goto err_free; + + ar->cmdbuf[0] = cpu_to_le32(plen); + ar->cmdbuf[0] |= cpu_to_le32(cmd << 8); + /* writing multiple regs fills this buffer already */ + if (plen && payload != (u8 *)(&ar->cmdbuf[1])) + memcpy(&ar->cmdbuf[1], payload, plen); + + spin_lock_irqsave(&aru->common.cmdlock, flags); + aru->readbuf = (u8 *)out; + aru->readlen = outlen; + spin_unlock_irqrestore(&aru->common.cmdlock, flags); + + usb_fill_int_urb(urb, aru->udev, + usb_sndbulkpipe(aru->udev, AR9170_EP_CMD), + aru->common.cmdbuf, plen + 4, + ar9170_usb_tx_urb_complete, NULL, 1); + + usb_anchor_urb(urb, &aru->tx_submitted); + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err) { + usb_unanchor_urb(urb); + usb_free_urb(urb); + goto err_unbuf; + } + usb_free_urb(urb); + + err = wait_for_completion_timeout(&aru->cmd_wait, HZ); + if (err == 0) { + err = -ETIMEDOUT; + goto err_unbuf; + } + + if (outlen >= 0 && aru->readlen != outlen) { + err = -EMSGSIZE; + goto err_unbuf; + } + + return 0; + +err_unbuf: + /* Maybe the device was removed in the second we were waiting? */ + if (IS_STARTED(ar)) { + dev_err(&aru->udev->dev, "no command feedback " + "received (%d).\n", err); + + /* provide some maybe useful debug information */ + print_hex_dump_bytes("ar9170 cmd: ", DUMP_PREFIX_NONE, + aru->common.cmdbuf, plen + 4); + dump_stack(); + } + + /* invalidate to avoid completing the next prematurely */ + spin_lock_irqsave(&aru->common.cmdlock, flags); + aru->readbuf = NULL; + aru->readlen = 0; + spin_unlock_irqrestore(&aru->common.cmdlock, flags); + +err_free: + + return err; +} + +static int ar9170_usb_tx(struct ar9170 *ar, struct sk_buff *skb, + bool txstatus_needed, unsigned int extra_len) +{ + struct ar9170_usb *aru = (struct ar9170_usb *) ar; + struct urb *urb; + int err; + + if (unlikely(!IS_STARTED(ar))) { + /* Seriously, what were you drink... err... thinking!? */ + return -EPERM; + } + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (unlikely(!urb)) + return -ENOMEM; + + usb_fill_bulk_urb(urb, aru->udev, + usb_sndbulkpipe(aru->udev, AR9170_EP_TX), + skb->data, skb->len + extra_len, (txstatus_needed ? + ar9170_usb_tx_urb_complete : + ar9170_usb_tx_urb_complete_free), skb); + urb->transfer_flags |= URB_ZERO_PACKET; + + usb_anchor_urb(urb, &aru->tx_submitted); + err = usb_submit_urb(urb, GFP_ATOMIC); + if (unlikely(err)) + usb_unanchor_urb(urb); + + usb_free_urb(urb); + return err; +} + +static void ar9170_usb_callback_cmd(struct ar9170 *ar, u32 len , void *buffer) +{ + struct ar9170_usb *aru = (void *) ar; + unsigned long flags; + u32 in, out; + + if (!buffer) + return ; + + in = le32_to_cpup((__le32 *)buffer); + out = le32_to_cpu(ar->cmdbuf[0]); + + /* mask off length byte */ + out &= ~0xFF; + + if (aru->readlen >= 0) { + /* add expected length */ + out |= aru->readlen; + } else { + /* add obtained length */ + out |= in & 0xFF; + } + + /* + * Some commands (e.g: AR9170_CMD_FREQUENCY) have a variable response + * length and we cannot predict the correct length in advance. + * So we only check if we provided enough space for the data. + */ + if (unlikely(out < in)) { + dev_warn(&aru->udev->dev, "received invalid command response " + "got %d bytes, instead of %d bytes " + "and the resp length is %d bytes\n", + in, out, len); + print_hex_dump_bytes("ar9170 invalid resp: ", + DUMP_PREFIX_OFFSET, buffer, len); + /* + * Do not complete, then the command times out, + * and we get a stack trace from there. + */ + return ; + } + + spin_lock_irqsave(&aru->common.cmdlock, flags); + if (aru->readbuf && len > 0) { + memcpy(aru->readbuf, buffer + 4, len - 4); + aru->readbuf = NULL; + } + complete(&aru->cmd_wait); + spin_unlock_irqrestore(&aru->common.cmdlock, flags); +} + +static int ar9170_usb_upload(struct ar9170_usb *aru, const void *data, + size_t len, u32 addr, bool complete) +{ + int transfer, err; + u8 *buf = kmalloc(4096, GFP_KERNEL); + + if (!buf) + return -ENOMEM; + + while (len) { + transfer = min_t(int, len, 4096); + memcpy(buf, data, transfer); + + err = usb_control_msg(aru->udev, usb_sndctrlpipe(aru->udev, 0), + 0x30 /* FW DL */, 0x40 | USB_DIR_OUT, + addr >> 8, 0, buf, transfer, 1000); + + if (err < 0) { + kfree(buf); + return err; + } + + len -= transfer; + data += transfer; + addr += transfer; + } + kfree(buf); + + if (complete) { + err = usb_control_msg(aru->udev, usb_sndctrlpipe(aru->udev, 0), + 0x31 /* FW DL COMPLETE */, + 0x40 | USB_DIR_OUT, 0, 0, NULL, 0, 5000); + } + + return 0; +} + +static int ar9170_usb_request_firmware(struct ar9170_usb *aru) +{ + int err = 0; + + err = request_firmware(&aru->init_values, "ar9170-1.fw", + &aru->udev->dev); + if (err) { + dev_err(&aru->udev->dev, "file with init values not found.\n"); + return err; + } + + err = request_firmware(&aru->firmware, "ar9170-2.fw", &aru->udev->dev); + if (err) { + release_firmware(aru->init_values); + dev_err(&aru->udev->dev, "firmware file not found.\n"); + return err; + } + + return err; +} + +static int ar9170_usb_reset(struct ar9170_usb *aru) +{ + int ret, lock = (aru->intf->condition != USB_INTERFACE_BINDING); + + if (lock) { + ret = usb_lock_device_for_reset(aru->udev, aru->intf); + if (ret < 0) { + dev_err(&aru->udev->dev, "unable to lock device " + "for reset (%d).\n", ret); + return ret; + } + } + + ret = usb_reset_device(aru->udev); + if (lock) + usb_unlock_device(aru->udev); + + /* let it rest - for a second - */ + msleep(1000); + + return ret; +} + +static int ar9170_usb_upload_firmware(struct ar9170_usb *aru) +{ + int err; + + /* First, upload initial values to device RAM */ + err = ar9170_usb_upload(aru, aru->init_values->data, + aru->init_values->size, 0x102800, false); + if (err) { + dev_err(&aru->udev->dev, "firmware part 1 " + "upload failed (%d).\n", err); + return err; + } + + /* Then, upload the firmware itself and start it */ + return ar9170_usb_upload(aru, aru->firmware->data, aru->firmware->size, + 0x200000, true); +} + +static int ar9170_usb_init_transport(struct ar9170_usb *aru) +{ + struct ar9170 *ar = (void *) &aru->common; + int err; + + ar9170_regwrite_begin(ar); + + /* Set USB Rx stream mode MAX packet number to 2 */ + ar9170_regwrite(AR9170_USB_REG_MAX_AGG_UPLOAD, 0x4); + + /* Set USB Rx stream mode timeout to 10us */ + ar9170_regwrite(AR9170_USB_REG_UPLOAD_TIME_CTL, 0x80); + + ar9170_regwrite_finish(); + + err = ar9170_regwrite_result(); + if (err) + dev_err(&aru->udev->dev, "USB setup failed (%d).\n", err); + + return err; +} + +static void ar9170_usb_stop(struct ar9170 *ar) +{ + struct ar9170_usb *aru = (void *) ar; + int ret; + + if (IS_ACCEPTING_CMD(ar)) + aru->common.state = AR9170_STOPPED; + + /* lets wait a while until the tx - queues are dried out */ + ret = usb_wait_anchor_empty_timeout(&aru->tx_submitted, + msecs_to_jiffies(1000)); + if (ret == 0) + dev_err(&aru->udev->dev, "kill pending tx urbs.\n"); + + usb_poison_anchored_urbs(&aru->tx_submitted); + + /* + * Note: + * So far we freed all tx urbs, but we won't dare to touch any rx urbs. + * Else we would end up with a unresponsive device... + */ +} + +static int ar9170_usb_open(struct ar9170 *ar) +{ + struct ar9170_usb *aru = (void *) ar; + int err; + + usb_unpoison_anchored_urbs(&aru->tx_submitted); + err = ar9170_usb_init_transport(aru); + if (err) { + usb_poison_anchored_urbs(&aru->tx_submitted); + return err; + } + + aru->common.state = AR9170_IDLE; + return 0; +} + +static int ar9170_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct ar9170_usb *aru; + struct ar9170 *ar; + struct usb_device *udev; + int err; + + aru = ar9170_alloc(sizeof(*aru)); + if (IS_ERR(aru)) { + err = PTR_ERR(aru); + goto out; + } + + udev = interface_to_usbdev(intf); + usb_get_dev(udev); + aru->udev = udev; + aru->intf = intf; + ar = &aru->common; + + usb_set_intfdata(intf, aru); + SET_IEEE80211_DEV(ar->hw, &udev->dev); + + init_usb_anchor(&aru->rx_submitted); + init_usb_anchor(&aru->tx_submitted); + init_completion(&aru->cmd_wait); + + aru->common.stop = ar9170_usb_stop; + aru->common.open = ar9170_usb_open; + aru->common.tx = ar9170_usb_tx; + aru->common.exec_cmd = ar9170_usb_exec_cmd; + aru->common.callback_cmd = ar9170_usb_callback_cmd; + + err = ar9170_usb_reset(aru); + if (err) + goto err_unlock; + + err = ar9170_usb_request_firmware(aru); + if (err) + goto err_unlock; + + err = ar9170_usb_alloc_rx_irq_urb(aru); + if (err) + goto err_freefw; + + err = ar9170_usb_alloc_rx_bulk_urbs(aru); + if (err) + goto err_unrx; + + err = ar9170_usb_upload_firmware(aru); + if (err) { + err = ar9170_echo_test(&aru->common, 0x60d43110); + if (err) { + /* force user invention, by disabling the device */ + err = usb_driver_set_configuration(aru->udev, -1); + dev_err(&aru->udev->dev, "device is in a bad state. " + "please reconnect it!\n"); + goto err_unrx; + } + } + + err = ar9170_usb_open(ar); + if (err) + goto err_unrx; + + err = ar9170_register(ar, &udev->dev); + + ar9170_usb_stop(ar); + if (err) + goto err_unrx; + + return 0; + +err_unrx: + ar9170_usb_cancel_urbs(aru); + +err_freefw: + release_firmware(aru->init_values); + release_firmware(aru->firmware); + +err_unlock: + usb_set_intfdata(intf, NULL); + usb_put_dev(udev); + ieee80211_free_hw(ar->hw); +out: + return err; +} + +static void ar9170_usb_disconnect(struct usb_interface *intf) +{ + struct ar9170_usb *aru = usb_get_intfdata(intf); + + if (!aru) + return; + + aru->common.state = AR9170_IDLE; + ar9170_unregister(&aru->common); + ar9170_usb_cancel_urbs(aru); + + release_firmware(aru->init_values); + release_firmware(aru->firmware); + + usb_put_dev(aru->udev); + usb_set_intfdata(intf, NULL); + ieee80211_free_hw(aru->common.hw); +} + +static struct usb_driver ar9170_driver = { + .name = "ar9170usb", + .probe = ar9170_usb_probe, + .disconnect = ar9170_usb_disconnect, + .id_table = ar9170_usb_ids, + .soft_unbind = 1, +}; + +static int __init ar9170_init(void) +{ + return usb_register(&ar9170_driver); +} + +static void __exit ar9170_exit(void) +{ + usb_deregister(&ar9170_driver); +} + +module_init(ar9170_init); +module_exit(ar9170_exit); diff --git a/drivers/net/wireless/ar9170/usb.h b/drivers/net/wireless/ar9170/usb.h new file mode 100644 index 00000000000..f5852924cd6 --- /dev/null +++ b/drivers/net/wireless/ar9170/usb.h @@ -0,0 +1,74 @@ +/* + * Atheros AR9170 USB driver + * + * Driver specific definitions + * + * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> + * Copyright 2009, Christian Lamparter <chunkeey@web.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, see + * http://www.gnu.org/licenses/. + * + * This file incorporates work covered by the following copyright and + * permission notice: + * Copyright (c) 2007-2008 Atheros Communications, Inc. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +#ifndef __USB_H +#define __USB_H + +#include <linux/usb.h> +#include <linux/completion.h> +#include <linux/spinlock.h> +#include <linux/leds.h> +#include <net/wireless.h> +#include <net/mac80211.h> +#include <linux/firmware.h> +#include "eeprom.h" +#include "hw.h" +#include "ar9170.h" + +#define AR9170_NUM_RX_URBS 16 + +struct firmware; + +struct ar9170_usb { + struct ar9170 common; + struct usb_device *udev; + struct usb_interface *intf; + + struct usb_anchor rx_submitted; + struct usb_anchor tx_submitted; + + spinlock_t cmdlock; + struct completion cmd_wait; + int readlen; + u8 *readbuf; + + const struct firmware *init_values; + const struct firmware *firmware; +}; + +#endif /* __USB_H */ diff --git a/drivers/net/wireless/arlan-main.c b/drivers/net/wireless/arlan-main.c index bfca15da6f0..5b9f1e06ebf 100644 --- a/drivers/net/wireless/arlan-main.c +++ b/drivers/net/wireless/arlan-main.c @@ -1030,7 +1030,17 @@ static int arlan_mac_addr(struct net_device *dev, void *p) return 0; } - +static const struct net_device_ops arlan_netdev_ops = { + .ndo_open = arlan_open, + .ndo_stop = arlan_close, + .ndo_start_xmit = arlan_tx, + .ndo_get_stats = arlan_statistics, + .ndo_set_multicast_list = arlan_set_multicast, + .ndo_change_mtu = arlan_change_mtu, + .ndo_set_mac_address = arlan_mac_addr, + .ndo_tx_timeout = arlan_tx_timeout, + .ndo_validate_addr = eth_validate_addr, +}; static int __init arlan_setup_device(struct net_device *dev, int num) { @@ -1042,14 +1052,7 @@ static int __init arlan_setup_device(struct net_device *dev, int num) ap->conf = (struct arlan_shmem *)(ap+1); dev->tx_queue_len = tx_queue_len; - dev->open = arlan_open; - dev->stop = arlan_close; - dev->hard_start_xmit = arlan_tx; - dev->get_stats = arlan_statistics; - dev->set_multicast_list = arlan_set_multicast; - dev->change_mtu = arlan_change_mtu; - dev->set_mac_address = arlan_mac_addr; - dev->tx_timeout = arlan_tx_timeout; + dev->netdev_ops = &arlan_netdev_ops; dev->watchdog_timeo = 3*HZ; ap->irq_test_done = 0; diff --git a/drivers/net/wireless/ath5k/ath5k.h b/drivers/net/wireless/ath5k/ath5k.h index 0dc2c7321c8..0b616e72fe0 100644 --- a/drivers/net/wireless/ath5k/ath5k.h +++ b/drivers/net/wireless/ath5k/ath5k.h @@ -204,9 +204,9 @@ #define AR5K_TUNE_CWMAX_11B 1023 #define AR5K_TUNE_CWMAX_XR 7 #define AR5K_TUNE_NOISE_FLOOR -72 -#define AR5K_TUNE_MAX_TXPOWER 60 -#define AR5K_TUNE_DEFAULT_TXPOWER 30 -#define AR5K_TUNE_TPC_TXPOWER true +#define AR5K_TUNE_MAX_TXPOWER 63 +#define AR5K_TUNE_DEFAULT_TXPOWER 25 +#define AR5K_TUNE_TPC_TXPOWER false #define AR5K_TUNE_ANT_DIVERSITY true #define AR5K_TUNE_HWTXTRIES 4 @@ -551,11 +551,11 @@ enum ath5k_pkt_type { */ #define AR5K_TXPOWER_OFDM(_r, _v) ( \ ((0 & 1) << ((_v) + 6)) | \ - (((ah->ah_txpower.txp_rates[(_r)]) & 0x3f) << (_v)) \ + (((ah->ah_txpower.txp_rates_power_table[(_r)]) & 0x3f) << (_v)) \ ) #define AR5K_TXPOWER_CCK(_r, _v) ( \ - (ah->ah_txpower.txp_rates[(_r)] & 0x3f) << (_v) \ + (ah->ah_txpower.txp_rates_power_table[(_r)] & 0x3f) << (_v) \ ) /* @@ -1085,13 +1085,25 @@ struct ath5k_hw { struct ath5k_gain ah_gain; u8 ah_offset[AR5K_MAX_RF_BANKS]; + struct { - u16 txp_pcdac[AR5K_EEPROM_POWER_TABLE_SIZE]; - u16 txp_rates[AR5K_MAX_RATES]; - s16 txp_min; - s16 txp_max; + /* Temporary tables used for interpolation */ + u8 tmpL[AR5K_EEPROM_N_PD_GAINS] + [AR5K_EEPROM_POWER_TABLE_SIZE]; + u8 tmpR[AR5K_EEPROM_N_PD_GAINS] + [AR5K_EEPROM_POWER_TABLE_SIZE]; + u8 txp_pd_table[AR5K_EEPROM_POWER_TABLE_SIZE * 2]; + u16 txp_rates_power_table[AR5K_MAX_RATES]; + u8 txp_min_idx; bool txp_tpc; + /* Values in 0.25dB units */ + s16 txp_min_pwr; + s16 txp_max_pwr; + s16 txp_offset; s16 txp_ofdm; + /* Values in dB units */ + s16 txp_cck_ofdm_pwr_delta; + s16 txp_cck_ofdm_gainf_delta; } ah_txpower; struct { @@ -1161,6 +1173,7 @@ extern void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, struct ieee80211_l /* EEPROM access functions */ extern int ath5k_eeprom_init(struct ath5k_hw *ah); +extern void ath5k_eeprom_detach(struct ath5k_hw *ah); extern int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac); extern bool ath5k_eeprom_is_hb63(struct ath5k_hw *ah); @@ -1256,8 +1269,8 @@ extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant); extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah); extern int ath5k_hw_phy_disable(struct ath5k_hw *ah); /* TX power setup */ -extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int txpower); -extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power); +extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, u8 ee_mode, u8 txpower); +extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 ee_mode, u8 txpower); /* * Functions used internaly diff --git a/drivers/net/wireless/ath5k/attach.c b/drivers/net/wireless/ath5k/attach.c index 656cb9dc833..70d376c63aa 100644 --- a/drivers/net/wireless/ath5k/attach.c +++ b/drivers/net/wireless/ath5k/attach.c @@ -341,6 +341,8 @@ void ath5k_hw_detach(struct ath5k_hw *ah) if (ah->ah_rf_banks != NULL) kfree(ah->ah_rf_banks); + ath5k_eeprom_detach(ah); + /* assume interrupts are down */ kfree(ah); } diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index cad3ccf61b0..5d57d774e46 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -685,13 +685,6 @@ ath5k_pci_resume(struct pci_dev *pdev) if (err) return err; - /* - * Suspend/Resume resets the PCI configuration space, so we have to - * re-disable the RETRY_TIMEOUT register (0x41) to keep - * PCI Tx retries from interfering with C3 CPU state - */ - pci_write_config_byte(pdev, 0x41, 0); - err = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc); if (err) { ATH5K_ERR(sc, "request_irq failed\n"); @@ -1095,9 +1088,18 @@ ath5k_mode_setup(struct ath5k_softc *sc) static inline int ath5k_hw_to_driver_rix(struct ath5k_softc *sc, int hw_rix) { - WARN(hw_rix < 0 || hw_rix >= AR5K_MAX_RATES, - "hw_rix out of bounds: %x\n", hw_rix); - return sc->rate_idx[sc->curband->band][hw_rix]; + int rix; + + /* return base rate on errors */ + if (WARN(hw_rix < 0 || hw_rix >= AR5K_MAX_RATES, + "hw_rix out of bounds: %x\n", hw_rix)) + return 0; + + rix = sc->rate_idx[sc->curband->band][hw_rix]; + if (WARN(rix < 0, "invalid hw_rix: %x\n", hw_rix)) + rix = 0; + + return rix; } /***************\ @@ -1216,6 +1218,9 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) pktlen = skb->len; + /* FIXME: If we are in g mode and rate is a CCK rate + * subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta + * from tx power (value is in dB units already) */ if (info->control.hw_key) { keyidx = info->control.hw_key->hw_key_idx; pktlen += info->control.hw_key->icv_len; @@ -2044,6 +2049,9 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf) antenna = sc->bsent & 4 ? 2 : 1; } + /* FIXME: If we are in g mode and rate is a CCK rate + * subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta + * from tx power (value is in dB units already) */ ds->ds_data = bf->skbaddr; ret = ah->ah_setup_tx_desc(ah, ds, skb->len, ieee80211_get_hdrlen_from_skb(skb), @@ -2305,7 +2313,7 @@ ath5k_init(struct ath5k_softc *sc) sc->curband = &sc->sbands[sc->curchan->band]; sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL | AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL | - AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_MIB; + AR5K_INT_FATAL | AR5K_INT_GLOBAL; ret = ath5k_reset(sc, false, false); if (ret) goto done; @@ -2554,7 +2562,7 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) if (skb_headroom(skb) < padsize) { ATH5K_ERR(sc, "tx hdrlen not %%4: %d not enough" " headroom to pad %d\n", hdrlen, padsize); - return NETDEV_TX_BUSY; + goto drop_packet; } skb_push(skb, padsize); memmove(skb->data, skb->data+padsize, hdrlen); @@ -2565,7 +2573,7 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) ATH5K_ERR(sc, "no further txbuf available, dropping packet\n"); spin_unlock_irqrestore(&sc->txbuflock, flags); ieee80211_stop_queue(hw, skb_get_queue_mapping(skb)); - return NETDEV_TX_BUSY; + goto drop_packet; } bf = list_first_entry(&sc->txbuf, struct ath5k_buf, list); list_del(&bf->list); @@ -2582,10 +2590,12 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) list_add_tail(&bf->list, &sc->txbuf); sc->txbuf_len++; spin_unlock_irqrestore(&sc->txbuflock, flags); - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; + goto drop_packet; } + return NETDEV_TX_OK; +drop_packet: + dev_kfree_skb_any(skb); return NETDEV_TX_OK; } @@ -2608,12 +2618,6 @@ ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel) goto err; } - /* - * This is needed only to setup initial state - * but it's best done after a reset. - */ - ath5k_hw_set_txpower_limit(sc->ah, 0); - ret = ath5k_rx_start(sc); if (ret) { ATH5K_ERR(sc, "can't start recv logic\n"); diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h index 20e0d14b41e..822956114cd 100644 --- a/drivers/net/wireless/ath5k/base.h +++ b/drivers/net/wireless/ath5k/base.h @@ -112,7 +112,7 @@ struct ath5k_softc { struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS]; struct ieee80211_channel channels[ATH_CHAN_MAX]; struct ieee80211_rate rates[IEEE80211_NUM_BANDS][AR5K_MAX_RATES]; - u8 rate_idx[IEEE80211_NUM_BANDS][AR5K_MAX_RATES]; + s8 rate_idx[IEEE80211_NUM_BANDS][AR5K_MAX_RATES]; enum nl80211_iftype opmode; struct ath5k_hw *ah; /* Atheros HW */ diff --git a/drivers/net/wireless/ath5k/desc.c b/drivers/net/wireless/ath5k/desc.c index b40a9287a39..dc30a2b70a6 100644 --- a/drivers/net/wireless/ath5k/desc.c +++ b/drivers/net/wireless/ath5k/desc.c @@ -194,6 +194,10 @@ static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah, return -EINVAL; } + tx_power += ah->ah_txpower.txp_offset; + if (tx_power > AR5K_TUNE_MAX_TXPOWER) + tx_power = AR5K_TUNE_MAX_TXPOWER; + /* Clear descriptor */ memset(&desc->ud.ds_tx5212, 0, sizeof(struct ath5k_hw_5212_tx_desc)); diff --git a/drivers/net/wireless/ath5k/eeprom.c b/drivers/net/wireless/ath5k/eeprom.c index ac45ca47ca8..c0fb3b09ba4 100644 --- a/drivers/net/wireless/ath5k/eeprom.c +++ b/drivers/net/wireless/ath5k/eeprom.c @@ -1,7 +1,7 @@ /* * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> - * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> - * Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org> + * Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com> + * Copyright (c) 2008-2009 Felix Fietkau <nbd@openwrt.org> * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -98,11 +98,6 @@ ath5k_eeprom_init_header(struct ath5k_hw *ah) int ret; u16 val; - /* Initial TX thermal adjustment values */ - ee->ee_tx_clip = 4; - ee->ee_pwd_84 = ee->ee_pwd_90 = 1; - ee->ee_gain_select = 1; - /* * Read values from EEPROM and store them in the capability structure */ @@ -241,22 +236,22 @@ static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset, ee->ee_adc_desired_size[mode] = (s8)((val >> 8) & 0xff); switch(mode) { case AR5K_EEPROM_MODE_11A: - ee->ee_ob[mode][3] = (val >> 5) & 0x7; - ee->ee_db[mode][3] = (val >> 2) & 0x7; - ee->ee_ob[mode][2] = (val << 1) & 0x7; + ee->ee_ob[mode][3] = (val >> 5) & 0x7; + ee->ee_db[mode][3] = (val >> 2) & 0x7; + ee->ee_ob[mode][2] = (val << 1) & 0x7; AR5K_EEPROM_READ(o++, val); - ee->ee_ob[mode][2] |= (val >> 15) & 0x1; - ee->ee_db[mode][2] = (val >> 12) & 0x7; - ee->ee_ob[mode][1] = (val >> 9) & 0x7; - ee->ee_db[mode][1] = (val >> 6) & 0x7; - ee->ee_ob[mode][0] = (val >> 3) & 0x7; - ee->ee_db[mode][0] = val & 0x7; + ee->ee_ob[mode][2] |= (val >> 15) & 0x1; + ee->ee_db[mode][2] = (val >> 12) & 0x7; + ee->ee_ob[mode][1] = (val >> 9) & 0x7; + ee->ee_db[mode][1] = (val >> 6) & 0x7; + ee->ee_ob[mode][0] = (val >> 3) & 0x7; + ee->ee_db[mode][0] = val & 0x7; break; case AR5K_EEPROM_MODE_11G: case AR5K_EEPROM_MODE_11B: - ee->ee_ob[mode][1] = (val >> 4) & 0x7; - ee->ee_db[mode][1] = val & 0x7; + ee->ee_ob[mode][1] = (val >> 4) & 0x7; + ee->ee_db[mode][1] = val & 0x7; break; } @@ -504,35 +499,6 @@ ath5k_eeprom_init_modes(struct ath5k_hw *ah) return 0; } -/* Used to match PCDAC steps with power values on RF5111 chips - * (eeprom versions < 4). For RF5111 we have 10 pre-defined PCDAC - * steps that match with the power values we read from eeprom. On - * older eeprom versions (< 3.2) these steps are equaly spaced at - * 10% of the pcdac curve -until the curve reaches it's maximum- - * (10 steps from 0 to 100%) but on newer eeprom versions (>= 3.2) - * these 10 steps are spaced in a different way. This function returns - * the pcdac steps based on eeprom version and curve min/max so that we - * can have pcdac/pwr points. - */ -static inline void -ath5k_get_pcdac_intercepts(struct ath5k_hw *ah, u8 min, u8 max, u8 *vp) -{ - static const u16 intercepts3[] = - { 0, 5, 10, 20, 30, 50, 70, 85, 90, 95, 100 }; - static const u16 intercepts3_2[] = - { 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 }; - const u16 *ip; - int i; - - if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_2) - ip = intercepts3_2; - else - ip = intercepts3; - - for (i = 0; i < ARRAY_SIZE(intercepts3); i++) - *vp++ = (ip[i] * max + (100 - ip[i]) * min) / 100; -} - /* Read the frequency piers for each mode (mostly used on newer eeproms with 0xff * frequency mask) */ static inline int @@ -546,26 +512,25 @@ ath5k_eeprom_read_freq_list(struct ath5k_hw *ah, int *offset, int max, int ret; u16 val; + ee->ee_n_piers[mode] = 0; while(i < max) { AR5K_EEPROM_READ(o++, val); - freq1 = (val >> 8) & 0xff; - freq2 = val & 0xff; - - if (freq1) { - pc[i++].freq = ath5k_eeprom_bin2freq(ee, - freq1, mode); - ee->ee_n_piers[mode]++; - } + freq1 = val & 0xff; + if (!freq1) + break; - if (freq2) { - pc[i++].freq = ath5k_eeprom_bin2freq(ee, - freq2, mode); - ee->ee_n_piers[mode]++; - } + pc[i++].freq = ath5k_eeprom_bin2freq(ee, + freq1, mode); + ee->ee_n_piers[mode]++; - if (!freq1 || !freq2) + freq2 = (val >> 8) & 0xff; + if (!freq2) break; + + pc[i++].freq = ath5k_eeprom_bin2freq(ee, + freq2, mode); + ee->ee_n_piers[mode]++; } /* return new offset */ @@ -652,13 +617,122 @@ ath5k_eeprom_init_11bg_2413(struct ath5k_hw *ah, unsigned int mode, int offset) return 0; } -/* Read power calibration for RF5111 chips +/* + * Read power calibration for RF5111 chips + * * For RF5111 we have an XPD -eXternal Power Detector- curve - * for each calibrated channel. Each curve has PCDAC steps on - * x axis and power on y axis and looks like a logarithmic - * function. To recreate the curve and pass the power values - * on the pcdac table, we read 10 points here and interpolate later. + * for each calibrated channel. Each curve has 0,5dB Power steps + * on x axis and PCDAC steps (offsets) on y axis and looks like an + * exponential function. To recreate the curve we read 11 points + * here and interpolate later. */ + +/* Used to match PCDAC steps with power values on RF5111 chips + * (eeprom versions < 4). For RF5111 we have 11 pre-defined PCDAC + * steps that match with the power values we read from eeprom. On + * older eeprom versions (< 3.2) these steps are equaly spaced at + * 10% of the pcdac curve -until the curve reaches it's maximum- + * (11 steps from 0 to 100%) but on newer eeprom versions (>= 3.2) + * these 11 steps are spaced in a different way. This function returns + * the pcdac steps based on eeprom version and curve min/max so that we + * can have pcdac/pwr points. + */ +static inline void +ath5k_get_pcdac_intercepts(struct ath5k_hw *ah, u8 min, u8 max, u8 *vp) +{ + const static u16 intercepts3[] = + { 0, 5, 10, 20, 30, 50, 70, 85, 90, 95, 100 }; + const static u16 intercepts3_2[] = + { 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 }; + const u16 *ip; + int i; + + if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_2) + ip = intercepts3_2; + else + ip = intercepts3; + + for (i = 0; i < ARRAY_SIZE(intercepts3); i++) + vp[i] = (ip[i] * max + (100 - ip[i]) * min) / 100; +} + +/* Convert RF5111 specific data to generic raw data + * used by interpolation code */ +static int +ath5k_eeprom_convert_pcal_info_5111(struct ath5k_hw *ah, int mode, + struct ath5k_chan_pcal_info *chinfo) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info_rf5111 *pcinfo; + struct ath5k_pdgain_info *pd; + u8 pier, point, idx; + u8 *pdgain_idx = ee->ee_pdc_to_idx[mode]; + + /* Fill raw data for each calibration pier */ + for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) { + + pcinfo = &chinfo[pier].rf5111_info; + + /* Allocate pd_curves for this cal pier */ + chinfo[pier].pd_curves = + kcalloc(AR5K_EEPROM_N_PD_CURVES, + sizeof(struct ath5k_pdgain_info), + GFP_KERNEL); + + if (!chinfo[pier].pd_curves) + return -ENOMEM; + + /* Only one curve for RF5111 + * find out which one and place + * in in pd_curves. + * Note: ee_x_gain is reversed here */ + for (idx = 0; idx < AR5K_EEPROM_N_PD_CURVES; idx++) { + + if (!((ee->ee_x_gain[mode] >> idx) & 0x1)) { + pdgain_idx[0] = idx; + break; + } + } + + ee->ee_pd_gains[mode] = 1; + + pd = &chinfo[pier].pd_curves[idx]; + + pd->pd_points = AR5K_EEPROM_N_PWR_POINTS_5111; + + /* Allocate pd points for this curve */ + pd->pd_step = kcalloc(AR5K_EEPROM_N_PWR_POINTS_5111, + sizeof(u8), GFP_KERNEL); + if (!pd->pd_step) + return -ENOMEM; + + pd->pd_pwr = kcalloc(AR5K_EEPROM_N_PWR_POINTS_5111, + sizeof(s16), GFP_KERNEL); + if (!pd->pd_pwr) + return -ENOMEM; + + /* Fill raw dataset + * (convert power to 0.25dB units + * for RF5112 combatibility) */ + for (point = 0; point < pd->pd_points; point++) { + + /* Absolute values */ + pd->pd_pwr[point] = 2 * pcinfo->pwr[point]; + + /* Already sorted */ + pd->pd_step[point] = pcinfo->pcdac[point]; + } + + /* Set min/max pwr */ + chinfo[pier].min_pwr = pd->pd_pwr[0]; + chinfo[pier].max_pwr = pd->pd_pwr[10]; + + } + + return 0; +} + +/* Parse EEPROM data */ static int ath5k_eeprom_read_pcal_info_5111(struct ath5k_hw *ah, int mode) { @@ -747,30 +821,165 @@ ath5k_eeprom_read_pcal_info_5111(struct ath5k_hw *ah, int mode) cdata->pcdac_max, cdata->pcdac); } - return 0; + return ath5k_eeprom_convert_pcal_info_5111(ah, mode, pcal); } -/* Read power calibration for RF5112 chips + +/* + * Read power calibration for RF5112 chips + * * For RF5112 we have 4 XPD -eXternal Power Detector- curves * for each calibrated channel on 0, -6, -12 and -18dbm but we only - * use the higher (3) and the lower (0) curves. Each curve has PCDAC - * steps on x axis and power on y axis and looks like a linear - * function. To recreate the curve and pass the power values - * on the pcdac table, we read 4 points for xpd 0 and 3 points - * for xpd 3 here and interpolate later. + * use the higher (3) and the lower (0) curves. Each curve has 0.5dB + * power steps on x axis and PCDAC steps on y axis and looks like a + * linear function. To recreate the curve and pass the power values + * on hw, we read 4 points for xpd 0 (lower gain -> max power) + * and 3 points for xpd 3 (higher gain -> lower power) here and + * interpolate later. * * Note: Many vendors just use xpd 0 so xpd 3 is zeroed. */ + +/* Convert RF5112 specific data to generic raw data + * used by interpolation code */ +static int +ath5k_eeprom_convert_pcal_info_5112(struct ath5k_hw *ah, int mode, + struct ath5k_chan_pcal_info *chinfo) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info_rf5112 *pcinfo; + u8 *pdgain_idx = ee->ee_pdc_to_idx[mode]; + unsigned int pier, pdg, point; + + /* Fill raw data for each calibration pier */ + for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) { + + pcinfo = &chinfo[pier].rf5112_info; + + /* Allocate pd_curves for this cal pier */ + chinfo[pier].pd_curves = + kcalloc(AR5K_EEPROM_N_PD_CURVES, + sizeof(struct ath5k_pdgain_info), + GFP_KERNEL); + + if (!chinfo[pier].pd_curves) + return -ENOMEM; + + /* Fill pd_curves */ + for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) { + + u8 idx = pdgain_idx[pdg]; + struct ath5k_pdgain_info *pd = + &chinfo[pier].pd_curves[idx]; + + /* Lowest gain curve (max power) */ + if (pdg == 0) { + /* One more point for better accuracy */ + pd->pd_points = AR5K_EEPROM_N_XPD0_POINTS; + + /* Allocate pd points for this curve */ + pd->pd_step = kcalloc(pd->pd_points, + sizeof(u8), GFP_KERNEL); + + if (!pd->pd_step) + return -ENOMEM; + + pd->pd_pwr = kcalloc(pd->pd_points, + sizeof(s16), GFP_KERNEL); + + if (!pd->pd_pwr) + return -ENOMEM; + + + /* Fill raw dataset + * (all power levels are in 0.25dB units) */ + pd->pd_step[0] = pcinfo->pcdac_x0[0]; + pd->pd_pwr[0] = pcinfo->pwr_x0[0]; + + for (point = 1; point < pd->pd_points; + point++) { + /* Absolute values */ + pd->pd_pwr[point] = + pcinfo->pwr_x0[point]; + + /* Deltas */ + pd->pd_step[point] = + pd->pd_step[point - 1] + + pcinfo->pcdac_x0[point]; + } + + /* Set min power for this frequency */ + chinfo[pier].min_pwr = pd->pd_pwr[0]; + + /* Highest gain curve (min power) */ + } else if (pdg == 1) { + + pd->pd_points = AR5K_EEPROM_N_XPD3_POINTS; + + /* Allocate pd points for this curve */ + pd->pd_step = kcalloc(pd->pd_points, + sizeof(u8), GFP_KERNEL); + + if (!pd->pd_step) + return -ENOMEM; + + pd->pd_pwr = kcalloc(pd->pd_points, + sizeof(s16), GFP_KERNEL); + + if (!pd->pd_pwr) + return -ENOMEM; + + /* Fill raw dataset + * (all power levels are in 0.25dB units) */ + for (point = 0; point < pd->pd_points; + point++) { + /* Absolute values */ + pd->pd_pwr[point] = + pcinfo->pwr_x3[point]; + + /* Fixed points */ + pd->pd_step[point] = + pcinfo->pcdac_x3[point]; + } + + /* Since we have a higher gain curve + * override min power */ + chinfo[pier].min_pwr = pd->pd_pwr[0]; + } + } + } + + return 0; +} + +/* Parse EEPROM data */ static int ath5k_eeprom_read_pcal_info_5112(struct ath5k_hw *ah, int mode) { struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; struct ath5k_chan_pcal_info_rf5112 *chan_pcal_info; struct ath5k_chan_pcal_info *gen_chan_info; + u8 *pdgain_idx = ee->ee_pdc_to_idx[mode]; u32 offset; - unsigned int i, c; + u8 i, c; u16 val; int ret; + u8 pd_gains = 0; + + /* Count how many curves we have and + * identify them (which one of the 4 + * available curves we have on each count). + * Curves are stored from lower (x0) to + * higher (x3) gain */ + for (i = 0; i < AR5K_EEPROM_N_PD_CURVES; i++) { + /* ee_x_gain[mode] is x gain mask */ + if ((ee->ee_x_gain[mode] >> i) & 0x1) + pdgain_idx[pd_gains++] = i; + } + ee->ee_pd_gains[mode] = pd_gains; + + if (pd_gains == 0 || pd_gains > 2) + return -EINVAL; switch (mode) { case AR5K_EEPROM_MODE_11A: @@ -808,13 +1017,13 @@ ath5k_eeprom_read_pcal_info_5112(struct ath5k_hw *ah, int mode) for (i = 0; i < ee->ee_n_piers[mode]; i++) { chan_pcal_info = &gen_chan_info[i].rf5112_info; - /* Power values in dBm * 4 + /* Power values in quarter dB * for the lower xpd gain curve * (0 dBm -> higher output power) */ for (c = 0; c < AR5K_EEPROM_N_XPD0_POINTS; c++) { AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pwr_x0[c] = (val & 0xff); - chan_pcal_info->pwr_x0[++c] = ((val >> 8) & 0xff); + chan_pcal_info->pwr_x0[c] = (s8) (val & 0xff); + chan_pcal_info->pwr_x0[++c] = (s8) ((val >> 8) & 0xff); } /* PCDAC steps @@ -825,12 +1034,12 @@ ath5k_eeprom_read_pcal_info_5112(struct ath5k_hw *ah, int mode) chan_pcal_info->pcdac_x0[2] = ((val >> 5) & 0x1f); chan_pcal_info->pcdac_x0[3] = ((val >> 10) & 0x1f); - /* Power values in dBm * 4 + /* Power values in quarter dB * for the higher xpd gain curve * (18 dBm -> lower output power) */ AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pwr_x3[0] = (val & 0xff); - chan_pcal_info->pwr_x3[1] = ((val >> 8) & 0xff); + chan_pcal_info->pwr_x3[0] = (s8) (val & 0xff); + chan_pcal_info->pwr_x3[1] = (s8) ((val >> 8) & 0xff); AR5K_EEPROM_READ(offset++, val); chan_pcal_info->pwr_x3[2] = (val & 0xff); @@ -843,24 +1052,36 @@ ath5k_eeprom_read_pcal_info_5112(struct ath5k_hw *ah, int mode) chan_pcal_info->pcdac_x3[2] = 63; if (ee->ee_version >= AR5K_EEPROM_VERSION_4_3) { - chan_pcal_info->pcdac_x0[0] = ((val >> 8) & 0xff); + chan_pcal_info->pcdac_x0[0] = ((val >> 8) & 0x3f); /* Last xpd0 power level is also channel maximum */ gen_chan_info[i].max_pwr = chan_pcal_info->pwr_x0[3]; } else { chan_pcal_info->pcdac_x0[0] = 1; - gen_chan_info[i].max_pwr = ((val >> 8) & 0xff); + gen_chan_info[i].max_pwr = (s8) ((val >> 8) & 0xff); } - /* Recreate pcdac_x0 table for this channel using pcdac steps */ - chan_pcal_info->pcdac_x0[1] += chan_pcal_info->pcdac_x0[0]; - chan_pcal_info->pcdac_x0[2] += chan_pcal_info->pcdac_x0[1]; - chan_pcal_info->pcdac_x0[3] += chan_pcal_info->pcdac_x0[2]; } - return 0; + return ath5k_eeprom_convert_pcal_info_5112(ah, mode, gen_chan_info); } + +/* + * Read power calibration for RF2413 chips + * + * For RF2413 we have a Power to PDDAC table (Power Detector) + * instead of a PCDAC and 4 pd gain curves for each calibrated channel. + * Each curve has power on x axis in 0.5 db steps and PDDADC steps on y + * axis and looks like an exponential function like the RF5111 curve. + * + * To recreate the curves we read here the points and interpolate + * later. Note that in most cases only 2 (higher and lower) curves are + * used (like RF5112) but vendors have the oportunity to include all + * 4 curves on eeprom. The final curve (higher power) has an extra + * point for better accuracy like RF5112. + */ + /* For RF2413 power calibration data doesn't start on a fixed location and * if a mode is not supported, it's section is missing -not zeroed-. * So we need to calculate the starting offset for each section by using @@ -890,13 +1111,15 @@ ath5k_cal_data_offset_2413(struct ath5k_eeprom_info *ee, int mode) switch(mode) { case AR5K_EEPROM_MODE_11G: if (AR5K_EEPROM_HDR_11B(ee->ee_header)) - offset += ath5k_pdgains_size_2413(ee, AR5K_EEPROM_MODE_11B) + - AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2; + offset += ath5k_pdgains_size_2413(ee, + AR5K_EEPROM_MODE_11B) + + AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2; /* fall through */ case AR5K_EEPROM_MODE_11B: if (AR5K_EEPROM_HDR_11A(ee->ee_header)) - offset += ath5k_pdgains_size_2413(ee, AR5K_EEPROM_MODE_11A) + - AR5K_EEPROM_N_5GHZ_CHAN / 2; + offset += ath5k_pdgains_size_2413(ee, + AR5K_EEPROM_MODE_11A) + + AR5K_EEPROM_N_5GHZ_CHAN / 2; /* fall through */ case AR5K_EEPROM_MODE_11A: break; @@ -907,37 +1130,118 @@ ath5k_cal_data_offset_2413(struct ath5k_eeprom_info *ee, int mode) return offset; } -/* Read power calibration for RF2413 chips - * For RF2413 we have a PDDAC table (Power Detector) instead - * of a PCDAC and 4 pd gain curves for each calibrated channel. - * Each curve has PDDAC steps on x axis and power on y axis and - * looks like an exponential function. To recreate the curves - * we read here the points and interpolate later. Note that - * in most cases only higher and lower curves are used (like - * RF5112) but vendors have the oportunity to include all 4 - * curves on eeprom. The final curve (higher power) has an extra - * point for better accuracy like RF5112. - */ +/* Convert RF2413 specific data to generic raw data + * used by interpolation code */ +static int +ath5k_eeprom_convert_pcal_info_2413(struct ath5k_hw *ah, int mode, + struct ath5k_chan_pcal_info *chinfo) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info_rf2413 *pcinfo; + u8 *pdgain_idx = ee->ee_pdc_to_idx[mode]; + unsigned int pier, pdg, point; + + /* Fill raw data for each calibration pier */ + for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) { + + pcinfo = &chinfo[pier].rf2413_info; + + /* Allocate pd_curves for this cal pier */ + chinfo[pier].pd_curves = + kcalloc(AR5K_EEPROM_N_PD_CURVES, + sizeof(struct ath5k_pdgain_info), + GFP_KERNEL); + + if (!chinfo[pier].pd_curves) + return -ENOMEM; + + /* Fill pd_curves */ + for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) { + + u8 idx = pdgain_idx[pdg]; + struct ath5k_pdgain_info *pd = + &chinfo[pier].pd_curves[idx]; + + /* One more point for the highest power + * curve (lowest gain) */ + if (pdg == ee->ee_pd_gains[mode] - 1) + pd->pd_points = AR5K_EEPROM_N_PD_POINTS; + else + pd->pd_points = AR5K_EEPROM_N_PD_POINTS - 1; + + /* Allocate pd points for this curve */ + pd->pd_step = kcalloc(pd->pd_points, + sizeof(u8), GFP_KERNEL); + + if (!pd->pd_step) + return -ENOMEM; + + pd->pd_pwr = kcalloc(pd->pd_points, + sizeof(s16), GFP_KERNEL); + + if (!pd->pd_pwr) + return -ENOMEM; + + /* Fill raw dataset + * convert all pwr levels to + * quarter dB for RF5112 combatibility */ + pd->pd_step[0] = pcinfo->pddac_i[pdg]; + pd->pd_pwr[0] = 4 * pcinfo->pwr_i[pdg]; + + for (point = 1; point < pd->pd_points; point++) { + + pd->pd_pwr[point] = pd->pd_pwr[point - 1] + + 2 * pcinfo->pwr[pdg][point - 1]; + + pd->pd_step[point] = pd->pd_step[point - 1] + + pcinfo->pddac[pdg][point - 1]; + + } + + /* Highest gain curve -> min power */ + if (pdg == 0) + chinfo[pier].min_pwr = pd->pd_pwr[0]; + + /* Lowest gain curve -> max power */ + if (pdg == ee->ee_pd_gains[mode] - 1) + chinfo[pier].max_pwr = + pd->pd_pwr[pd->pd_points - 1]; + } + } + + return 0; +} + +/* Parse EEPROM data */ static int ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode) { struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; - struct ath5k_chan_pcal_info_rf2413 *chan_pcal_info; - struct ath5k_chan_pcal_info *gen_chan_info; - unsigned int i, c; + struct ath5k_chan_pcal_info_rf2413 *pcinfo; + struct ath5k_chan_pcal_info *chinfo; + u8 *pdgain_idx = ee->ee_pdc_to_idx[mode]; u32 offset; - int ret; + int idx, i, ret; u16 val; u8 pd_gains = 0; - if (ee->ee_x_gain[mode] & 0x1) pd_gains++; - if ((ee->ee_x_gain[mode] >> 1) & 0x1) pd_gains++; - if ((ee->ee_x_gain[mode] >> 2) & 0x1) pd_gains++; - if ((ee->ee_x_gain[mode] >> 3) & 0x1) pd_gains++; + /* Count how many curves we have and + * identify them (which one of the 4 + * available curves we have on each count). + * Curves are stored from higher to + * lower gain so we go backwards */ + for (idx = AR5K_EEPROM_N_PD_CURVES - 1; idx >= 0; idx--) { + /* ee_x_gain[mode] is x gain mask */ + if ((ee->ee_x_gain[mode] >> idx) & 0x1) + pdgain_idx[pd_gains++] = idx; + + } ee->ee_pd_gains[mode] = pd_gains; + if (pd_gains == 0) + return -EINVAL; + offset = ath5k_cal_data_offset_2413(ee, mode); - ee->ee_n_piers[mode] = 0; switch (mode) { case AR5K_EEPROM_MODE_11A: if (!AR5K_EEPROM_HDR_11A(ee->ee_header)) @@ -945,7 +1249,7 @@ ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode) ath5k_eeprom_init_11a_pcal_freq(ah, offset); offset += AR5K_EEPROM_N_5GHZ_CHAN / 2; - gen_chan_info = ee->ee_pwr_cal_a; + chinfo = ee->ee_pwr_cal_a; break; case AR5K_EEPROM_MODE_11B: if (!AR5K_EEPROM_HDR_11B(ee->ee_header)) @@ -953,7 +1257,7 @@ ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode) ath5k_eeprom_init_11bg_2413(ah, mode, offset); offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2; - gen_chan_info = ee->ee_pwr_cal_b; + chinfo = ee->ee_pwr_cal_b; break; case AR5K_EEPROM_MODE_11G: if (!AR5K_EEPROM_HDR_11G(ee->ee_header)) @@ -961,41 +1265,35 @@ ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode) ath5k_eeprom_init_11bg_2413(ah, mode, offset); offset += AR5K_EEPROM_N_2GHZ_CHAN_2413 / 2; - gen_chan_info = ee->ee_pwr_cal_g; + chinfo = ee->ee_pwr_cal_g; break; default: return -EINVAL; } - if (pd_gains == 0) - return 0; - for (i = 0; i < ee->ee_n_piers[mode]; i++) { - chan_pcal_info = &gen_chan_info[i].rf2413_info; + pcinfo = &chinfo[i].rf2413_info; /* * Read pwr_i, pddac_i and the first * 2 pd points (pwr, pddac) */ AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pwr_i[0] = val & 0x1f; - chan_pcal_info->pddac_i[0] = (val >> 5) & 0x7f; - chan_pcal_info->pwr[0][0] = - (val >> 12) & 0xf; + pcinfo->pwr_i[0] = val & 0x1f; + pcinfo->pddac_i[0] = (val >> 5) & 0x7f; + pcinfo->pwr[0][0] = (val >> 12) & 0xf; AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pddac[0][0] = val & 0x3f; - chan_pcal_info->pwr[0][1] = (val >> 6) & 0xf; - chan_pcal_info->pddac[0][1] = - (val >> 10) & 0x3f; + pcinfo->pddac[0][0] = val & 0x3f; + pcinfo->pwr[0][1] = (val >> 6) & 0xf; + pcinfo->pddac[0][1] = (val >> 10) & 0x3f; AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pwr[0][2] = val & 0xf; - chan_pcal_info->pddac[0][2] = - (val >> 4) & 0x3f; + pcinfo->pwr[0][2] = val & 0xf; + pcinfo->pddac[0][2] = (val >> 4) & 0x3f; - chan_pcal_info->pwr[0][3] = 0; - chan_pcal_info->pddac[0][3] = 0; + pcinfo->pwr[0][3] = 0; + pcinfo->pddac[0][3] = 0; if (pd_gains > 1) { /* @@ -1003,44 +1301,36 @@ ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode) * so it only has 2 pd points. * Continue wih pd gain 1. */ - chan_pcal_info->pwr_i[1] = (val >> 10) & 0x1f; + pcinfo->pwr_i[1] = (val >> 10) & 0x1f; - chan_pcal_info->pddac_i[1] = (val >> 15) & 0x1; + pcinfo->pddac_i[1] = (val >> 15) & 0x1; AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pddac_i[1] |= (val & 0x3F) << 1; + pcinfo->pddac_i[1] |= (val & 0x3F) << 1; - chan_pcal_info->pwr[1][0] = (val >> 6) & 0xf; - chan_pcal_info->pddac[1][0] = - (val >> 10) & 0x3f; + pcinfo->pwr[1][0] = (val >> 6) & 0xf; + pcinfo->pddac[1][0] = (val >> 10) & 0x3f; AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pwr[1][1] = val & 0xf; - chan_pcal_info->pddac[1][1] = - (val >> 4) & 0x3f; - chan_pcal_info->pwr[1][2] = - (val >> 10) & 0xf; - - chan_pcal_info->pddac[1][2] = - (val >> 14) & 0x3; + pcinfo->pwr[1][1] = val & 0xf; + pcinfo->pddac[1][1] = (val >> 4) & 0x3f; + pcinfo->pwr[1][2] = (val >> 10) & 0xf; + + pcinfo->pddac[1][2] = (val >> 14) & 0x3; AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pddac[1][2] |= - (val & 0xF) << 2; + pcinfo->pddac[1][2] |= (val & 0xF) << 2; - chan_pcal_info->pwr[1][3] = 0; - chan_pcal_info->pddac[1][3] = 0; + pcinfo->pwr[1][3] = 0; + pcinfo->pddac[1][3] = 0; } else if (pd_gains == 1) { /* * Pd gain 0 is the last one so * read the extra point. */ - chan_pcal_info->pwr[0][3] = - (val >> 10) & 0xf; + pcinfo->pwr[0][3] = (val >> 10) & 0xf; - chan_pcal_info->pddac[0][3] = - (val >> 14) & 0x3; + pcinfo->pddac[0][3] = (val >> 14) & 0x3; AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pddac[0][3] |= - (val & 0xF) << 2; + pcinfo->pddac[0][3] |= (val & 0xF) << 2; } /* @@ -1048,105 +1338,65 @@ ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode) * as above. */ if (pd_gains > 2) { - chan_pcal_info->pwr_i[2] = (val >> 4) & 0x1f; - chan_pcal_info->pddac_i[2] = (val >> 9) & 0x7f; + pcinfo->pwr_i[2] = (val >> 4) & 0x1f; + pcinfo->pddac_i[2] = (val >> 9) & 0x7f; AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pwr[2][0] = - (val >> 0) & 0xf; - chan_pcal_info->pddac[2][0] = - (val >> 4) & 0x3f; - chan_pcal_info->pwr[2][1] = - (val >> 10) & 0xf; - - chan_pcal_info->pddac[2][1] = - (val >> 14) & 0x3; + pcinfo->pwr[2][0] = (val >> 0) & 0xf; + pcinfo->pddac[2][0] = (val >> 4) & 0x3f; + pcinfo->pwr[2][1] = (val >> 10) & 0xf; + + pcinfo->pddac[2][1] = (val >> 14) & 0x3; AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pddac[2][1] |= - (val & 0xF) << 2; + pcinfo->pddac[2][1] |= (val & 0xF) << 2; - chan_pcal_info->pwr[2][2] = - (val >> 4) & 0xf; - chan_pcal_info->pddac[2][2] = - (val >> 8) & 0x3f; + pcinfo->pwr[2][2] = (val >> 4) & 0xf; + pcinfo->pddac[2][2] = (val >> 8) & 0x3f; - chan_pcal_info->pwr[2][3] = 0; - chan_pcal_info->pddac[2][3] = 0; + pcinfo->pwr[2][3] = 0; + pcinfo->pddac[2][3] = 0; } else if (pd_gains == 2) { - chan_pcal_info->pwr[1][3] = - (val >> 4) & 0xf; - chan_pcal_info->pddac[1][3] = - (val >> 8) & 0x3f; + pcinfo->pwr[1][3] = (val >> 4) & 0xf; + pcinfo->pddac[1][3] = (val >> 8) & 0x3f; } if (pd_gains > 3) { - chan_pcal_info->pwr_i[3] = (val >> 14) & 0x3; + pcinfo->pwr_i[3] = (val >> 14) & 0x3; AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pwr_i[3] |= ((val >> 0) & 0x7) << 2; + pcinfo->pwr_i[3] |= ((val >> 0) & 0x7) << 2; - chan_pcal_info->pddac_i[3] = (val >> 3) & 0x7f; - chan_pcal_info->pwr[3][0] = - (val >> 10) & 0xf; - chan_pcal_info->pddac[3][0] = - (val >> 14) & 0x3; + pcinfo->pddac_i[3] = (val >> 3) & 0x7f; + pcinfo->pwr[3][0] = (val >> 10) & 0xf; + pcinfo->pddac[3][0] = (val >> 14) & 0x3; AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pddac[3][0] |= - (val & 0xF) << 2; - chan_pcal_info->pwr[3][1] = - (val >> 4) & 0xf; - chan_pcal_info->pddac[3][1] = - (val >> 8) & 0x3f; - - chan_pcal_info->pwr[3][2] = - (val >> 14) & 0x3; + pcinfo->pddac[3][0] |= (val & 0xF) << 2; + pcinfo->pwr[3][1] = (val >> 4) & 0xf; + pcinfo->pddac[3][1] = (val >> 8) & 0x3f; + + pcinfo->pwr[3][2] = (val >> 14) & 0x3; AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pwr[3][2] |= - ((val >> 0) & 0x3) << 2; + pcinfo->pwr[3][2] |= ((val >> 0) & 0x3) << 2; - chan_pcal_info->pddac[3][2] = - (val >> 2) & 0x3f; - chan_pcal_info->pwr[3][3] = - (val >> 8) & 0xf; + pcinfo->pddac[3][2] = (val >> 2) & 0x3f; + pcinfo->pwr[3][3] = (val >> 8) & 0xf; - chan_pcal_info->pddac[3][3] = - (val >> 12) & 0xF; + pcinfo->pddac[3][3] = (val >> 12) & 0xF; AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pddac[3][3] |= - ((val >> 0) & 0x3) << 4; + pcinfo->pddac[3][3] |= ((val >> 0) & 0x3) << 4; } else if (pd_gains == 3) { - chan_pcal_info->pwr[2][3] = - (val >> 14) & 0x3; + pcinfo->pwr[2][3] = (val >> 14) & 0x3; AR5K_EEPROM_READ(offset++, val); - chan_pcal_info->pwr[2][3] |= - ((val >> 0) & 0x3) << 2; - - chan_pcal_info->pddac[2][3] = - (val >> 2) & 0x3f; - } + pcinfo->pwr[2][3] |= ((val >> 0) & 0x3) << 2; - for (c = 0; c < pd_gains; c++) { - /* Recreate pwr table for this channel using pwr steps */ - chan_pcal_info->pwr[c][0] += chan_pcal_info->pwr_i[c] * 2; - chan_pcal_info->pwr[c][1] += chan_pcal_info->pwr[c][0]; - chan_pcal_info->pwr[c][2] += chan_pcal_info->pwr[c][1]; - chan_pcal_info->pwr[c][3] += chan_pcal_info->pwr[c][2]; - if (chan_pcal_info->pwr[c][3] == chan_pcal_info->pwr[c][2]) - chan_pcal_info->pwr[c][3] = 0; - - /* Recreate pddac table for this channel using pddac steps */ - chan_pcal_info->pddac[c][0] += chan_pcal_info->pddac_i[c]; - chan_pcal_info->pddac[c][1] += chan_pcal_info->pddac[c][0]; - chan_pcal_info->pddac[c][2] += chan_pcal_info->pddac[c][1]; - chan_pcal_info->pddac[c][3] += chan_pcal_info->pddac[c][2]; - if (chan_pcal_info->pddac[c][3] == chan_pcal_info->pddac[c][2]) - chan_pcal_info->pddac[c][3] = 0; + pcinfo->pddac[2][3] = (val >> 2) & 0x3f; } } - return 0; + return ath5k_eeprom_convert_pcal_info_2413(ah, mode, chinfo); } + /* * Read per rate target power (this is the maximum tx power * supported by the card). This info is used when setting @@ -1154,11 +1404,12 @@ ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode) * * This also works for v5 EEPROMs. */ -static int ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode) +static int +ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode) { struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; struct ath5k_rate_pcal_info *rate_pcal_info; - u16 *rate_target_pwr_num; + u8 *rate_target_pwr_num; u32 offset; u16 val; int ret, i; @@ -1264,7 +1515,9 @@ ath5k_eeprom_read_pcal_info(struct ath5k_hw *ah) else read_pcal = ath5k_eeprom_read_pcal_info_5111; - for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++) { + + for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; + mode++) { err = read_pcal(ah, mode); if (err) return err; @@ -1277,6 +1530,62 @@ ath5k_eeprom_read_pcal_info(struct ath5k_hw *ah) return 0; } +static int +ath5k_eeprom_free_pcal_info(struct ath5k_hw *ah, int mode) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info *chinfo; + u8 pier, pdg; + + switch (mode) { + case AR5K_EEPROM_MODE_11A: + if (!AR5K_EEPROM_HDR_11A(ee->ee_header)) + return 0; + chinfo = ee->ee_pwr_cal_a; + break; + case AR5K_EEPROM_MODE_11B: + if (!AR5K_EEPROM_HDR_11B(ee->ee_header)) + return 0; + chinfo = ee->ee_pwr_cal_b; + break; + case AR5K_EEPROM_MODE_11G: + if (!AR5K_EEPROM_HDR_11G(ee->ee_header)) + return 0; + chinfo = ee->ee_pwr_cal_g; + break; + default: + return -EINVAL; + } + + for (pier = 0; pier < ee->ee_n_piers[mode]; pier++) { + if (!chinfo[pier].pd_curves) + continue; + + for (pdg = 0; pdg < ee->ee_pd_gains[mode]; pdg++) { + struct ath5k_pdgain_info *pd = + &chinfo[pier].pd_curves[pdg]; + + if (pd != NULL) { + kfree(pd->pd_step); + kfree(pd->pd_pwr); + } + } + + kfree(chinfo[pier].pd_curves); + } + + return 0; +} + +void +ath5k_eeprom_detach(struct ath5k_hw *ah) +{ + u8 mode; + + for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++) + ath5k_eeprom_free_pcal_info(ah, mode); +} + /* Read conformance test limits used for regulatory control */ static int ath5k_eeprom_read_ctl_info(struct ath5k_hw *ah) @@ -1457,3 +1766,4 @@ bool ath5k_eeprom_is_hb63(struct ath5k_hw *ah) else return false; } + diff --git a/drivers/net/wireless/ath5k/eeprom.h b/drivers/net/wireless/ath5k/eeprom.h index 1deebc0257d..b0c0606dea0 100644 --- a/drivers/net/wireless/ath5k/eeprom.h +++ b/drivers/net/wireless/ath5k/eeprom.h @@ -173,6 +173,7 @@ #define AR5K_EEPROM_N_5GHZ_CHAN 10 #define AR5K_EEPROM_N_2GHZ_CHAN 3 #define AR5K_EEPROM_N_2GHZ_CHAN_2413 4 +#define AR5K_EEPROM_N_2GHZ_CHAN_MAX 4 #define AR5K_EEPROM_MAX_CHAN 10 #define AR5K_EEPROM_N_PWR_POINTS_5111 11 #define AR5K_EEPROM_N_PCDAC 11 @@ -193,7 +194,7 @@ #define AR5K_EEPROM_SCALE_OC_DELTA(_x) (((_x) * 2) / 10) #define AR5K_EEPROM_N_CTLS(_v) AR5K_EEPROM_OFF(_v, 16, 32) #define AR5K_EEPROM_MAX_CTLS 32 -#define AR5K_EEPROM_N_XPD_PER_CHANNEL 4 +#define AR5K_EEPROM_N_PD_CURVES 4 #define AR5K_EEPROM_N_XPD0_POINTS 4 #define AR5K_EEPROM_N_XPD3_POINTS 3 #define AR5K_EEPROM_N_PD_GAINS 4 @@ -232,7 +233,7 @@ enum ath5k_ctl_mode { AR5K_CTL_11B = 1, AR5K_CTL_11G = 2, AR5K_CTL_TURBO = 3, - AR5K_CTL_108G = 4, + AR5K_CTL_TURBOG = 4, AR5K_CTL_2GHT20 = 5, AR5K_CTL_5GHT20 = 6, AR5K_CTL_2GHT40 = 7, @@ -240,65 +241,114 @@ enum ath5k_ctl_mode { AR5K_CTL_MODE_M = 15, }; +/* Default CTL ids for the 3 main reg domains. + * Atheros only uses these by default but vendors + * can have up to 32 different CTLs for different + * scenarios. Note that theese values are ORed with + * the mode id (above) so we can have up to 24 CTL + * datasets out of these 3 main regdomains. That leaves + * 8 ids that can be used by vendors and since 0x20 is + * missing from HAL sources i guess this is the set of + * custom CTLs vendors can use. */ +#define AR5K_CTL_FCC 0x10 +#define AR5K_CTL_CUSTOM 0x20 +#define AR5K_CTL_ETSI 0x30 +#define AR5K_CTL_MKK 0x40 + +/* Indicates a CTL with only mode set and + * no reg domain mapping, such CTLs are used + * for world roaming domains or simply when + * a reg domain is not set */ +#define AR5K_CTL_NO_REGDOMAIN 0xf0 + +/* Indicates an empty (invalid) CTL */ +#define AR5K_CTL_NO_CTL 0xff + /* Per channel calibration data, used for power table setup */ struct ath5k_chan_pcal_info_rf5111 { /* Power levels in half dbm units * for one power curve. */ - u8 pwr[AR5K_EEPROM_N_PWR_POINTS_5111]; + u8 pwr[AR5K_EEPROM_N_PWR_POINTS_5111]; /* PCDAC table steps * for the above values */ - u8 pcdac[AR5K_EEPROM_N_PWR_POINTS_5111]; + u8 pcdac[AR5K_EEPROM_N_PWR_POINTS_5111]; /* Starting PCDAC step */ - u8 pcdac_min; + u8 pcdac_min; /* Final PCDAC step */ - u8 pcdac_max; + u8 pcdac_max; }; struct ath5k_chan_pcal_info_rf5112 { /* Power levels in quarter dBm units * for lower (0) and higher (3) - * level curves */ - s8 pwr_x0[AR5K_EEPROM_N_XPD0_POINTS]; - s8 pwr_x3[AR5K_EEPROM_N_XPD3_POINTS]; + * level curves in 0.25dB units */ + s8 pwr_x0[AR5K_EEPROM_N_XPD0_POINTS]; + s8 pwr_x3[AR5K_EEPROM_N_XPD3_POINTS]; /* PCDAC table steps * for the above values */ - u8 pcdac_x0[AR5K_EEPROM_N_XPD0_POINTS]; - u8 pcdac_x3[AR5K_EEPROM_N_XPD3_POINTS]; + u8 pcdac_x0[AR5K_EEPROM_N_XPD0_POINTS]; + u8 pcdac_x3[AR5K_EEPROM_N_XPD3_POINTS]; }; struct ath5k_chan_pcal_info_rf2413 { /* Starting pwr/pddac values */ - s8 pwr_i[AR5K_EEPROM_N_PD_GAINS]; - u8 pddac_i[AR5K_EEPROM_N_PD_GAINS]; - /* (pwr,pddac) points */ - s8 pwr[AR5K_EEPROM_N_PD_GAINS] - [AR5K_EEPROM_N_PD_POINTS]; - u8 pddac[AR5K_EEPROM_N_PD_GAINS] - [AR5K_EEPROM_N_PD_POINTS]; + s8 pwr_i[AR5K_EEPROM_N_PD_GAINS]; + u8 pddac_i[AR5K_EEPROM_N_PD_GAINS]; + /* (pwr,pddac) points + * power levels in 0.5dB units */ + s8 pwr[AR5K_EEPROM_N_PD_GAINS] + [AR5K_EEPROM_N_PD_POINTS]; + u8 pddac[AR5K_EEPROM_N_PD_GAINS] + [AR5K_EEPROM_N_PD_POINTS]; +}; + +enum ath5k_powertable_type { + AR5K_PWRTABLE_PWR_TO_PCDAC = 0, + AR5K_PWRTABLE_LINEAR_PCDAC = 1, + AR5K_PWRTABLE_PWR_TO_PDADC = 2, +}; + +struct ath5k_pdgain_info { + u8 pd_points; + u8 *pd_step; + /* Power values are in + * 0.25dB units */ + s16 *pd_pwr; }; struct ath5k_chan_pcal_info { /* Frequency */ u16 freq; - /* Max available power */ - s8 max_pwr; + /* Tx power boundaries */ + s16 max_pwr; + s16 min_pwr; union { struct ath5k_chan_pcal_info_rf5111 rf5111_info; struct ath5k_chan_pcal_info_rf5112 rf5112_info; struct ath5k_chan_pcal_info_rf2413 rf2413_info; }; + /* Raw values used by phy code + * Curves are stored in order from lower + * gain to higher gain (max txpower -> min txpower) */ + struct ath5k_pdgain_info *pd_curves; }; -/* Per rate calibration data for each mode, used for power table setup */ +/* Per rate calibration data for each mode, + * used for rate power table setup. + * Note: Values in 0.5dB units */ struct ath5k_rate_pcal_info { u16 freq; /* Frequency */ - /* Power level for 6-24Mbit/s rates */ + /* Power level for 6-24Mbit/s rates or + * 1Mb rate */ u16 target_power_6to24; - /* Power level for 36Mbit rate */ + /* Power level for 36Mbit rate or + * 2Mb rate */ u16 target_power_36; - /* Power level for 48Mbit rate */ + /* Power level for 48Mbit rate or + * 5.5Mbit rate */ u16 target_power_48; - /* Power level for 54Mbit rate */ + /* Power level for 54Mbit rate or + * 11Mbit rate */ u16 target_power_54; }; @@ -330,12 +380,6 @@ struct ath5k_eeprom_info { u16 ee_cck_ofdm_power_delta; u16 ee_scaled_cck_delta; - /* Used for tx thermal adjustment (eeprom_init, rfregs) */ - u16 ee_tx_clip; - u16 ee_pwd_84; - u16 ee_pwd_90; - u16 ee_gain_select; - /* RF Calibration settings (reset, rfregs) */ u16 ee_i_cal[AR5K_EEPROM_N_MODES]; u16 ee_q_cal[AR5K_EEPROM_N_MODES]; @@ -363,23 +407,25 @@ struct ath5k_eeprom_info { /* Power calibration data */ u16 ee_false_detect[AR5K_EEPROM_N_MODES]; - /* Number of pd gain curves per mode (RF2413) */ - u8 ee_pd_gains[AR5K_EEPROM_N_MODES]; + /* Number of pd gain curves per mode */ + u8 ee_pd_gains[AR5K_EEPROM_N_MODES]; + /* Back mapping pdcurve number -> pdcurve index in pd->pd_curves */ + u8 ee_pdc_to_idx[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PD_GAINS]; - u8 ee_n_piers[AR5K_EEPROM_N_MODES]; + u8 ee_n_piers[AR5K_EEPROM_N_MODES]; struct ath5k_chan_pcal_info ee_pwr_cal_a[AR5K_EEPROM_N_5GHZ_CHAN]; - struct ath5k_chan_pcal_info ee_pwr_cal_b[AR5K_EEPROM_N_2GHZ_CHAN]; - struct ath5k_chan_pcal_info ee_pwr_cal_g[AR5K_EEPROM_N_2GHZ_CHAN]; + struct ath5k_chan_pcal_info ee_pwr_cal_b[AR5K_EEPROM_N_2GHZ_CHAN_MAX]; + struct ath5k_chan_pcal_info ee_pwr_cal_g[AR5K_EEPROM_N_2GHZ_CHAN_MAX]; /* Per rate target power levels */ - u16 ee_rate_target_pwr_num[AR5K_EEPROM_N_MODES]; + u8 ee_rate_target_pwr_num[AR5K_EEPROM_N_MODES]; struct ath5k_rate_pcal_info ee_rate_tpwr_a[AR5K_EEPROM_N_5GHZ_CHAN]; - struct ath5k_rate_pcal_info ee_rate_tpwr_b[AR5K_EEPROM_N_2GHZ_CHAN]; - struct ath5k_rate_pcal_info ee_rate_tpwr_g[AR5K_EEPROM_N_2GHZ_CHAN]; + struct ath5k_rate_pcal_info ee_rate_tpwr_b[AR5K_EEPROM_N_2GHZ_CHAN_MAX]; + struct ath5k_rate_pcal_info ee_rate_tpwr_g[AR5K_EEPROM_N_2GHZ_CHAN_MAX]; /* Conformance test limits (Unused) */ - u16 ee_ctls; - u16 ee_ctl[AR5K_EEPROM_MAX_CTLS]; + u8 ee_ctls; + u8 ee_ctl[AR5K_EEPROM_MAX_CTLS]; struct ath5k_edge_power ee_ctl_pwr[AR5K_EEPROM_N_EDGES * AR5K_EEPROM_MAX_CTLS]; /* Noise Floor Calibration settings */ diff --git a/drivers/net/wireless/ath5k/initvals.c b/drivers/net/wireless/ath5k/initvals.c index 44886434187..61fb621ed20 100644 --- a/drivers/net/wireless/ath5k/initvals.c +++ b/drivers/net/wireless/ath5k/initvals.c @@ -1510,8 +1510,8 @@ int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel) rf2425_ini_mode_end, mode); ath5k_hw_ini_registers(ah, - ARRAY_SIZE(rf2413_ini_common_end), - rf2413_ini_common_end, change_channel); + ARRAY_SIZE(rf2425_ini_common_end), + rf2425_ini_common_end, change_channel); ath5k_hw_ini_registers(ah, ARRAY_SIZE(rf5112_ini_bbgain), diff --git a/drivers/net/wireless/ath5k/led.c b/drivers/net/wireless/ath5k/led.c index 0686e12738b..19555fb79c9 100644 --- a/drivers/net/wireless/ath5k/led.c +++ b/drivers/net/wireless/ath5k/led.c @@ -65,6 +65,8 @@ static const struct pci_device_id ath5k_led_devices[] = { { ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0422), ATH_LED(1, 1) }, /* E-machines E510 (tuliom@gmail.com) */ { ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0428), ATH_LED(3, 0) }, + /* Acer Extensa 5620z (nekoreeve@gmail.com) */ + { ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0105), ATH_LED(3, 0) }, { } }; diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c index 81f5bebc48b..9e2faae5ae9 100644 --- a/drivers/net/wireless/ath5k/phy.c +++ b/drivers/net/wireless/ath5k/phy.c @@ -4,6 +4,7 @@ * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org> * Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com> * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com> + * Copyright (c) 2008-2009 Felix Fietkau <nbd@openwrt.org> * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -183,7 +184,9 @@ static void ath5k_hw_request_rfgain_probe(struct ath5k_hw *ah) if (ah->ah_gain.g_state != AR5K_RFGAIN_ACTIVE) return; - ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_max, + /* Send the packet with 2dB below max power as + * patent doc suggest */ + ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_max_pwr - 4, AR5K_PHY_PAPD_PROBE_TXPOWER) | AR5K_PHY_PAPD_PROBE_TX_NEXT, AR5K_PHY_PAPD_PROBE); @@ -1433,93 +1436,1120 @@ unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah) return false; /*XXX: What do we return for 5210 ?*/ } + +/****************\ +* TX power setup * +\****************/ + +/* + * Helper functions + */ + +/* + * Do linear interpolation between two given (x, y) points + */ +static s16 +ath5k_get_interpolated_value(s16 target, s16 x_left, s16 x_right, + s16 y_left, s16 y_right) +{ + s16 ratio, result; + + /* Avoid divide by zero and skip interpolation + * if we have the same point */ + if ((x_left == x_right) || (y_left == y_right)) + return y_left; + + /* + * Since we use ints and not fps, we need to scale up in + * order to get a sane ratio value (or else we 'll eg. get + * always 1 instead of 1.25, 1.75 etc). We scale up by 100 + * to have some accuracy both for 0.5 and 0.25 steps. + */ + ratio = ((100 * y_right - 100 * y_left)/(x_right - x_left)); + + /* Now scale down to be in range */ + result = y_left + (ratio * (target - x_left) / 100); + + return result; +} + +/* + * Find vertical boundary (min pwr) for the linear PCDAC curve. + * + * Since we have the top of the curve and we draw the line below + * until we reach 1 (1 pcdac step) we need to know which point + * (x value) that is so that we don't go below y axis and have negative + * pcdac values when creating the curve, or fill the table with zeroes. + */ +static s16 +ath5k_get_linear_pcdac_min(const u8 *stepL, const u8 *stepR, + const s16 *pwrL, const s16 *pwrR) +{ + s8 tmp; + s16 min_pwrL, min_pwrR; + s16 pwr_i = pwrL[0]; + + do { + pwr_i--; + tmp = (s8) ath5k_get_interpolated_value(pwr_i, + pwrL[0], pwrL[1], + stepL[0], stepL[1]); + + } while (tmp > 1); + + min_pwrL = pwr_i; + + pwr_i = pwrR[0]; + do { + pwr_i--; + tmp = (s8) ath5k_get_interpolated_value(pwr_i, + pwrR[0], pwrR[1], + stepR[0], stepR[1]); + + } while (tmp > 1); + + min_pwrR = pwr_i; + + /* Keep the right boundary so that it works for both curves */ + return max(min_pwrL, min_pwrR); +} + +/* + * Interpolate (pwr,vpd) points to create a Power to PDADC or a + * Power to PCDAC curve. + * + * Each curve has power on x axis (in 0.5dB units) and PCDAC/PDADC + * steps (offsets) on y axis. Power can go up to 31.5dB and max + * PCDAC/PDADC step for each curve is 64 but we can write more than + * one curves on hw so we can go up to 128 (which is the max step we + * can write on the final table). + * + * We write y values (PCDAC/PDADC steps) on hw. + */ +static void +ath5k_create_power_curve(s16 pmin, s16 pmax, + const s16 *pwr, const u8 *vpd, + u8 num_points, + u8 *vpd_table, u8 type) +{ + u8 idx[2] = { 0, 1 }; + s16 pwr_i = 2*pmin; + int i; + + if (num_points < 2) + return; + + /* We want the whole line, so adjust boundaries + * to cover the entire power range. Note that + * power values are already 0.25dB so no need + * to multiply pwr_i by 2 */ + if (type == AR5K_PWRTABLE_LINEAR_PCDAC) { + pwr_i = pmin; + pmin = 0; + pmax = 63; + } + + /* Find surrounding turning points (TPs) + * and interpolate between them */ + for (i = 0; (i <= (u16) (pmax - pmin)) && + (i < AR5K_EEPROM_POWER_TABLE_SIZE); i++) { + + /* We passed the right TP, move to the next set of TPs + * if we pass the last TP, extrapolate above using the last + * two TPs for ratio */ + if ((pwr_i > pwr[idx[1]]) && (idx[1] < num_points - 1)) { + idx[0]++; + idx[1]++; + } + + vpd_table[i] = (u8) ath5k_get_interpolated_value(pwr_i, + pwr[idx[0]], pwr[idx[1]], + vpd[idx[0]], vpd[idx[1]]); + + /* Increase by 0.5dB + * (0.25 dB units) */ + pwr_i += 2; + } +} + +/* + * Get the surrounding per-channel power calibration piers + * for a given frequency so that we can interpolate between + * them and come up with an apropriate dataset for our current + * channel. + */ +static void +ath5k_get_chan_pcal_surrounding_piers(struct ath5k_hw *ah, + struct ieee80211_channel *channel, + struct ath5k_chan_pcal_info **pcinfo_l, + struct ath5k_chan_pcal_info **pcinfo_r) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_chan_pcal_info *pcinfo; + u8 idx_l, idx_r; + u8 mode, max, i; + u32 target = channel->center_freq; + + idx_l = 0; + idx_r = 0; + + if (!(channel->hw_value & CHANNEL_OFDM)) { + pcinfo = ee->ee_pwr_cal_b; + mode = AR5K_EEPROM_MODE_11B; + } else if (channel->hw_value & CHANNEL_2GHZ) { + pcinfo = ee->ee_pwr_cal_g; + mode = AR5K_EEPROM_MODE_11G; + } else { + pcinfo = ee->ee_pwr_cal_a; + mode = AR5K_EEPROM_MODE_11A; + } + max = ee->ee_n_piers[mode] - 1; + + /* Frequency is below our calibrated + * range. Use the lowest power curve + * we have */ + if (target < pcinfo[0].freq) { + idx_l = idx_r = 0; + goto done; + } + + /* Frequency is above our calibrated + * range. Use the highest power curve + * we have */ + if (target > pcinfo[max].freq) { + idx_l = idx_r = max; + goto done; + } + + /* Frequency is inside our calibrated + * channel range. Pick the surrounding + * calibration piers so that we can + * interpolate */ + for (i = 0; i <= max; i++) { + + /* Frequency matches one of our calibration + * piers, no need to interpolate, just use + * that calibration pier */ + if (pcinfo[i].freq == target) { + idx_l = idx_r = i; + goto done; + } + + /* We found a calibration pier that's above + * frequency, use this pier and the previous + * one to interpolate */ + if (target < pcinfo[i].freq) { + idx_r = i; + idx_l = idx_r - 1; + goto done; + } + } + +done: + *pcinfo_l = &pcinfo[idx_l]; + *pcinfo_r = &pcinfo[idx_r]; + + return; +} + +/* + * Get the surrounding per-rate power calibration data + * for a given frequency and interpolate between power + * values to set max target power supported by hw for + * each rate. + */ +static void +ath5k_get_rate_pcal_data(struct ath5k_hw *ah, + struct ieee80211_channel *channel, + struct ath5k_rate_pcal_info *rates) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_rate_pcal_info *rpinfo; + u8 idx_l, idx_r; + u8 mode, max, i; + u32 target = channel->center_freq; + + idx_l = 0; + idx_r = 0; + + if (!(channel->hw_value & CHANNEL_OFDM)) { + rpinfo = ee->ee_rate_tpwr_b; + mode = AR5K_EEPROM_MODE_11B; + } else if (channel->hw_value & CHANNEL_2GHZ) { + rpinfo = ee->ee_rate_tpwr_g; + mode = AR5K_EEPROM_MODE_11G; + } else { + rpinfo = ee->ee_rate_tpwr_a; + mode = AR5K_EEPROM_MODE_11A; + } + max = ee->ee_rate_target_pwr_num[mode] - 1; + + /* Get the surrounding calibration + * piers - same as above */ + if (target < rpinfo[0].freq) { + idx_l = idx_r = 0; + goto done; + } + + if (target > rpinfo[max].freq) { + idx_l = idx_r = max; + goto done; + } + + for (i = 0; i <= max; i++) { + + if (rpinfo[i].freq == target) { + idx_l = idx_r = i; + goto done; + } + + if (target < rpinfo[i].freq) { + idx_r = i; + idx_l = idx_r - 1; + goto done; + } + } + +done: + /* Now interpolate power value, based on the frequency */ + rates->freq = target; + + rates->target_power_6to24 = + ath5k_get_interpolated_value(target, rpinfo[idx_l].freq, + rpinfo[idx_r].freq, + rpinfo[idx_l].target_power_6to24, + rpinfo[idx_r].target_power_6to24); + + rates->target_power_36 = + ath5k_get_interpolated_value(target, rpinfo[idx_l].freq, + rpinfo[idx_r].freq, + rpinfo[idx_l].target_power_36, + rpinfo[idx_r].target_power_36); + + rates->target_power_48 = + ath5k_get_interpolated_value(target, rpinfo[idx_l].freq, + rpinfo[idx_r].freq, + rpinfo[idx_l].target_power_48, + rpinfo[idx_r].target_power_48); + + rates->target_power_54 = + ath5k_get_interpolated_value(target, rpinfo[idx_l].freq, + rpinfo[idx_r].freq, + rpinfo[idx_l].target_power_54, + rpinfo[idx_r].target_power_54); +} + +/* + * Get the max edge power for this channel if + * we have such data from EEPROM's Conformance Test + * Limits (CTL), and limit max power if needed. + * + * FIXME: Only works for world regulatory domains + */ +static void +ath5k_get_max_ctl_power(struct ath5k_hw *ah, + struct ieee80211_channel *channel) +{ + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + struct ath5k_edge_power *rep = ee->ee_ctl_pwr; + u8 *ctl_val = ee->ee_ctl; + s16 max_chan_pwr = ah->ah_txpower.txp_max_pwr / 4; + s16 edge_pwr = 0; + u8 rep_idx; + u8 i, ctl_mode; + u8 ctl_idx = 0xFF; + u32 target = channel->center_freq; + + /* Find out a CTL for our mode that's not mapped + * on a specific reg domain. + * + * TODO: Map our current reg domain to one of the 3 available + * reg domain ids so that we can support more CTLs. */ + switch (channel->hw_value & CHANNEL_MODES) { + case CHANNEL_A: + ctl_mode = AR5K_CTL_11A | AR5K_CTL_NO_REGDOMAIN; + break; + case CHANNEL_G: + ctl_mode = AR5K_CTL_11G | AR5K_CTL_NO_REGDOMAIN; + break; + case CHANNEL_B: + ctl_mode = AR5K_CTL_11B | AR5K_CTL_NO_REGDOMAIN; + break; + case CHANNEL_T: + ctl_mode = AR5K_CTL_TURBO | AR5K_CTL_NO_REGDOMAIN; + break; + case CHANNEL_TG: + ctl_mode = AR5K_CTL_TURBOG | AR5K_CTL_NO_REGDOMAIN; + break; + case CHANNEL_XR: + /* Fall through */ + default: + return; + } + + for (i = 0; i < ee->ee_ctls; i++) { + if (ctl_val[i] == ctl_mode) { + ctl_idx = i; + break; + } + } + + /* If we have a CTL dataset available grab it and find the + * edge power for our frequency */ + if (ctl_idx == 0xFF) + return; + + /* Edge powers are sorted by frequency from lower + * to higher. Each CTL corresponds to 8 edge power + * measurements. */ + rep_idx = ctl_idx * AR5K_EEPROM_N_EDGES; + + /* Don't do boundaries check because we + * might have more that one bands defined + * for this mode */ + + /* Get the edge power that's closer to our + * frequency */ + for (i = 0; i < AR5K_EEPROM_N_EDGES; i++) { + rep_idx += i; + if (target <= rep[rep_idx].freq) + edge_pwr = (s16) rep[rep_idx].edge; + } + + if (edge_pwr) + ah->ah_txpower.txp_max_pwr = 4*min(edge_pwr, max_chan_pwr); +} + + +/* + * Power to PCDAC table functions + */ + /* - * TX power setup + * Fill Power to PCDAC table on RF5111 + * + * No further processing is needed for RF5111, the only thing we have to + * do is fill the values below and above calibration range since eeprom data + * may not cover the entire PCDAC table. */ +static void +ath5k_fill_pwr_to_pcdac_table(struct ath5k_hw *ah, s16* table_min, + s16 *table_max) +{ + u8 *pcdac_out = ah->ah_txpower.txp_pd_table; + u8 *pcdac_tmp = ah->ah_txpower.tmpL[0]; + u8 pcdac_0, pcdac_n, pcdac_i, pwr_idx, i; + s16 min_pwr, max_pwr; + + /* Get table boundaries */ + min_pwr = table_min[0]; + pcdac_0 = pcdac_tmp[0]; + + max_pwr = table_max[0]; + pcdac_n = pcdac_tmp[table_max[0] - table_min[0]]; + + /* Extrapolate below minimum using pcdac_0 */ + pcdac_i = 0; + for (i = 0; i < min_pwr; i++) + pcdac_out[pcdac_i++] = pcdac_0; + + /* Copy values from pcdac_tmp */ + pwr_idx = min_pwr; + for (i = 0 ; pwr_idx <= max_pwr && + pcdac_i < AR5K_EEPROM_POWER_TABLE_SIZE; i++) { + pcdac_out[pcdac_i++] = pcdac_tmp[i]; + pwr_idx++; + } + + /* Extrapolate above maximum */ + while (pcdac_i < AR5K_EEPROM_POWER_TABLE_SIZE) + pcdac_out[pcdac_i++] = pcdac_n; + +} /* - * Initialize the tx power table (not fully implemented) + * Combine available XPD Curves and fill Linear Power to PCDAC table + * on RF5112 + * + * RFX112 can have up to 2 curves (one for low txpower range and one for + * higher txpower range). We need to put them both on pcdac_out and place + * them in the correct location. In case we only have one curve available + * just fit it on pcdac_out (it's supposed to cover the entire range of + * available pwr levels since it's always the higher power curve). Extrapolate + * below and above final table if needed. */ -static void ath5k_txpower_table(struct ath5k_hw *ah, - struct ieee80211_channel *channel, s16 max_power) +static void +ath5k_combine_linear_pcdac_curves(struct ath5k_hw *ah, s16* table_min, + s16 *table_max, u8 pdcurves) { - unsigned int i, min, max, n; - u16 txpower, *rates; - - rates = ah->ah_txpower.txp_rates; - - txpower = AR5K_TUNE_DEFAULT_TXPOWER * 2; - if (max_power > txpower) - txpower = max_power > AR5K_TUNE_MAX_TXPOWER ? - AR5K_TUNE_MAX_TXPOWER : max_power; - - for (i = 0; i < AR5K_MAX_RATES; i++) - rates[i] = txpower; - - /* XXX setup target powers by rate */ - - ah->ah_txpower.txp_min = rates[7]; - ah->ah_txpower.txp_max = rates[0]; - ah->ah_txpower.txp_ofdm = rates[0]; - - /* Calculate the power table */ - n = ARRAY_SIZE(ah->ah_txpower.txp_pcdac); - min = AR5K_EEPROM_PCDAC_START; - max = AR5K_EEPROM_PCDAC_STOP; - for (i = 0; i < n; i += AR5K_EEPROM_PCDAC_STEP) - ah->ah_txpower.txp_pcdac[i] = -#ifdef notyet - min + ((i * (max - min)) / n); -#else - min; + u8 *pcdac_out = ah->ah_txpower.txp_pd_table; + u8 *pcdac_low_pwr; + u8 *pcdac_high_pwr; + u8 *pcdac_tmp; + u8 pwr; + s16 max_pwr_idx; + s16 min_pwr_idx; + s16 mid_pwr_idx = 0; + /* Edge flag turs on the 7nth bit on the PCDAC + * to delcare the higher power curve (force values + * to be greater than 64). If we only have one curve + * we don't need to set this, if we have 2 curves and + * fill the table backwards this can also be used to + * switch from higher power curve to lower power curve */ + u8 edge_flag; + int i; + + /* When we have only one curve available + * that's the higher power curve. If we have + * two curves the first is the high power curve + * and the next is the low power curve. */ + if (pdcurves > 1) { + pcdac_low_pwr = ah->ah_txpower.tmpL[1]; + pcdac_high_pwr = ah->ah_txpower.tmpL[0]; + mid_pwr_idx = table_max[1] - table_min[1] - 1; + max_pwr_idx = (table_max[0] - table_min[0]) / 2; + + /* If table size goes beyond 31.5dB, keep the + * upper 31.5dB range when setting tx power. + * Note: 126 = 31.5 dB in quarter dB steps */ + if (table_max[0] - table_min[1] > 126) + min_pwr_idx = table_max[0] - 126; + else + min_pwr_idx = table_min[1]; + + /* Since we fill table backwards + * start from high power curve */ + pcdac_tmp = pcdac_high_pwr; + + edge_flag = 0x40; +#if 0 + /* If both min and max power limits are in lower + * power curve's range, only use the low power curve. + * TODO: min/max levels are related to target + * power values requested from driver/user + * XXX: Is this really needed ? */ + if (min_pwr < table_max[1] && + max_pwr < table_max[1]) { + edge_flag = 0; + pcdac_tmp = pcdac_low_pwr; + max_pwr_idx = (table_max[1] - table_min[1])/2; + } #endif + } else { + pcdac_low_pwr = ah->ah_txpower.tmpL[1]; /* Zeroed */ + pcdac_high_pwr = ah->ah_txpower.tmpL[0]; + min_pwr_idx = table_min[0]; + max_pwr_idx = (table_max[0] - table_min[0]) / 2; + pcdac_tmp = pcdac_high_pwr; + edge_flag = 0; + } + + /* This is used when setting tx power*/ + ah->ah_txpower.txp_min_idx = min_pwr_idx/2; + + /* Fill Power to PCDAC table backwards */ + pwr = max_pwr_idx; + for (i = 63; i >= 0; i--) { + /* Entering lower power range, reset + * edge flag and set pcdac_tmp to lower + * power curve.*/ + if (edge_flag == 0x40 && + (2*pwr <= (table_max[1] - table_min[0]) || pwr == 0)) { + edge_flag = 0x00; + pcdac_tmp = pcdac_low_pwr; + pwr = mid_pwr_idx/2; + } + + /* Don't go below 1, extrapolate below if we have + * already swithced to the lower power curve -or + * we only have one curve and edge_flag is zero + * anyway */ + if (pcdac_tmp[pwr] < 1 && (edge_flag == 0x00)) { + while (i >= 0) { + pcdac_out[i] = pcdac_out[i + 1]; + i--; + } + break; + } + + pcdac_out[i] = pcdac_tmp[pwr] | edge_flag; + + /* Extrapolate above if pcdac is greater than + * 126 -this can happen because we OR pcdac_out + * value with edge_flag on high power curve */ + if (pcdac_out[i] > 126) + pcdac_out[i] = 126; + + /* Decrease by a 0.5dB step */ + pwr--; + } } +/* Write PCDAC values on hw */ +static void +ath5k_setup_pcdac_table(struct ath5k_hw *ah) +{ + u8 *pcdac_out = ah->ah_txpower.txp_pd_table; + int i; + + /* + * Write TX power values + */ + for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) { + ath5k_hw_reg_write(ah, + (((pcdac_out[2*i + 0] << 8 | 0xff) & 0xffff) << 0) | + (((pcdac_out[2*i + 1] << 8 | 0xff) & 0xffff) << 16), + AR5K_PHY_PCDAC_TXPOWER(i)); + } +} + + /* - * Set transmition power + * Power to PDADC table functions */ -int /*O.K. - txpower_table is unimplemented so this doesn't work*/ -ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, - unsigned int txpower) + +/* + * Set the gain boundaries and create final Power to PDADC table + * + * We can have up to 4 pd curves, we need to do a simmilar process + * as we do for RF5112. This time we don't have an edge_flag but we + * set the gain boundaries on a separate register. + */ +static void +ath5k_combine_pwr_to_pdadc_curves(struct ath5k_hw *ah, + s16 *pwr_min, s16 *pwr_max, u8 pdcurves) { - bool tpc = ah->ah_txpower.txp_tpc; - unsigned int i; + u8 gain_boundaries[AR5K_EEPROM_N_PD_GAINS]; + u8 *pdadc_out = ah->ah_txpower.txp_pd_table; + u8 *pdadc_tmp; + s16 pdadc_0; + u8 pdadc_i, pdadc_n, pwr_step, pdg, max_idx, table_size; + u8 pd_gain_overlap; + + /* Note: Register value is initialized on initvals + * there is no feedback from hw. + * XXX: What about pd_gain_overlap from EEPROM ? */ + pd_gain_overlap = (u8) ath5k_hw_reg_read(ah, AR5K_PHY_TPC_RG5) & + AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP; + + /* Create final PDADC table */ + for (pdg = 0, pdadc_i = 0; pdg < pdcurves; pdg++) { + pdadc_tmp = ah->ah_txpower.tmpL[pdg]; + + if (pdg == pdcurves - 1) + /* 2 dB boundary stretch for last + * (higher power) curve */ + gain_boundaries[pdg] = pwr_max[pdg] + 4; + else + /* Set gain boundary in the middle + * between this curve and the next one */ + gain_boundaries[pdg] = + (pwr_max[pdg] + pwr_min[pdg + 1]) / 2; + + /* Sanity check in case our 2 db stretch got out of + * range. */ + if (gain_boundaries[pdg] > AR5K_TUNE_MAX_TXPOWER) + gain_boundaries[pdg] = AR5K_TUNE_MAX_TXPOWER; + + /* For the first curve (lower power) + * start from 0 dB */ + if (pdg == 0) + pdadc_0 = 0; + else + /* For the other curves use the gain overlap */ + pdadc_0 = (gain_boundaries[pdg - 1] - pwr_min[pdg]) - + pd_gain_overlap; - ATH5K_TRACE(ah->ah_sc); - if (txpower > AR5K_TUNE_MAX_TXPOWER) { - ATH5K_ERR(ah->ah_sc, "invalid tx power: %u\n", txpower); - return -EINVAL; + /* Force each power step to be at least 0.5 dB */ + if ((pdadc_tmp[1] - pdadc_tmp[0]) > 1) + pwr_step = pdadc_tmp[1] - pdadc_tmp[0]; + else + pwr_step = 1; + + /* If pdadc_0 is negative, we need to extrapolate + * below this pdgain by a number of pwr_steps */ + while ((pdadc_0 < 0) && (pdadc_i < 128)) { + s16 tmp = pdadc_tmp[0] + pdadc_0 * pwr_step; + pdadc_out[pdadc_i++] = (tmp < 0) ? 0 : (u8) tmp; + pdadc_0++; + } + + /* Set last pwr level, using gain boundaries */ + pdadc_n = gain_boundaries[pdg] + pd_gain_overlap - pwr_min[pdg]; + /* Limit it to be inside pwr range */ + table_size = pwr_max[pdg] - pwr_min[pdg]; + max_idx = (pdadc_n < table_size) ? pdadc_n : table_size; + + /* Fill pdadc_out table */ + while (pdadc_0 < max_idx) + pdadc_out[pdadc_i++] = pdadc_tmp[pdadc_0++]; + + /* Need to extrapolate above this pdgain? */ + if (pdadc_n <= max_idx) + continue; + + /* Force each power step to be at least 0.5 dB */ + if ((pdadc_tmp[table_size - 1] - pdadc_tmp[table_size - 2]) > 1) + pwr_step = pdadc_tmp[table_size - 1] - + pdadc_tmp[table_size - 2]; + else + pwr_step = 1; + + /* Extrapolate above */ + while ((pdadc_0 < (s16) pdadc_n) && + (pdadc_i < AR5K_EEPROM_POWER_TABLE_SIZE * 2)) { + s16 tmp = pdadc_tmp[table_size - 1] + + (pdadc_0 - max_idx) * pwr_step; + pdadc_out[pdadc_i++] = (tmp > 127) ? 127 : (u8) tmp; + pdadc_0++; + } } + while (pdg < AR5K_EEPROM_N_PD_GAINS) { + gain_boundaries[pdg] = gain_boundaries[pdg - 1]; + pdg++; + } + + while (pdadc_i < AR5K_EEPROM_POWER_TABLE_SIZE * 2) { + pdadc_out[pdadc_i] = pdadc_out[pdadc_i - 1]; + pdadc_i++; + } + + /* Set gain boundaries */ + ath5k_hw_reg_write(ah, + AR5K_REG_SM(pd_gain_overlap, + AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP) | + AR5K_REG_SM(gain_boundaries[0], + AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1) | + AR5K_REG_SM(gain_boundaries[1], + AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2) | + AR5K_REG_SM(gain_boundaries[2], + AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3) | + AR5K_REG_SM(gain_boundaries[3], + AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4), + AR5K_PHY_TPC_RG5); + + /* Used for setting rate power table */ + ah->ah_txpower.txp_min_idx = pwr_min[0]; + +} + +/* Write PDADC values on hw */ +static void +ath5k_setup_pwr_to_pdadc_table(struct ath5k_hw *ah, + u8 pdcurves, u8 *pdg_to_idx) +{ + u8 *pdadc_out = ah->ah_txpower.txp_pd_table; + u32 reg; + u8 i; + + /* Select the right pdgain curves */ + + /* Clear current settings */ + reg = ath5k_hw_reg_read(ah, AR5K_PHY_TPC_RG1); + reg &= ~(AR5K_PHY_TPC_RG1_PDGAIN_1 | + AR5K_PHY_TPC_RG1_PDGAIN_2 | + AR5K_PHY_TPC_RG1_PDGAIN_3 | + AR5K_PHY_TPC_RG1_NUM_PD_GAIN); + /* - * RF2413 for some reason can't - * transmit anything if we call - * this funtion, so we skip it - * until we fix txpower. + * Use pd_gains curve from eeprom * - * XXX: Assume same for RF2425 - * to be safe. + * This overrides the default setting from initvals + * in case some vendors (e.g. Zcomax) don't use the default + * curves. If we don't honor their settings we 'll get a + * 5dB (1 * gain overlap ?) drop. */ - if ((ah->ah_radio == AR5K_RF2413) || (ah->ah_radio == AR5K_RF2425)) - return 0; + reg |= AR5K_REG_SM(pdcurves, AR5K_PHY_TPC_RG1_NUM_PD_GAIN); - /* Reset TX power values */ - memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower)); - ah->ah_txpower.txp_tpc = tpc; - - /* Initialize TX power table */ - ath5k_txpower_table(ah, channel, txpower); + switch (pdcurves) { + case 3: + reg |= AR5K_REG_SM(pdg_to_idx[2], AR5K_PHY_TPC_RG1_PDGAIN_3); + /* Fall through */ + case 2: + reg |= AR5K_REG_SM(pdg_to_idx[1], AR5K_PHY_TPC_RG1_PDGAIN_2); + /* Fall through */ + case 1: + reg |= AR5K_REG_SM(pdg_to_idx[0], AR5K_PHY_TPC_RG1_PDGAIN_1); + break; + } + ath5k_hw_reg_write(ah, reg, AR5K_PHY_TPC_RG1); /* * Write TX power values */ for (i = 0; i < (AR5K_EEPROM_POWER_TABLE_SIZE / 2); i++) { ath5k_hw_reg_write(ah, - ((((ah->ah_txpower.txp_pcdac[(i << 1) + 1] << 8) | 0xff) & 0xffff) << 16) | - (((ah->ah_txpower.txp_pcdac[(i << 1) ] << 8) | 0xff) & 0xffff), - AR5K_PHY_PCDAC_TXPOWER(i)); + ((pdadc_out[4*i + 0] & 0xff) << 0) | + ((pdadc_out[4*i + 1] & 0xff) << 8) | + ((pdadc_out[4*i + 2] & 0xff) << 16) | + ((pdadc_out[4*i + 3] & 0xff) << 24), + AR5K_PHY_PDADC_TXPOWER(i)); + } +} + + +/* + * Common code for PCDAC/PDADC tables + */ + +/* + * This is the main function that uses all of the above + * to set PCDAC/PDADC table on hw for the current channel. + * This table is used for tx power calibration on the basband, + * without it we get weird tx power levels and in some cases + * distorted spectral mask + */ +static int +ath5k_setup_channel_powertable(struct ath5k_hw *ah, + struct ieee80211_channel *channel, + u8 ee_mode, u8 type) +{ + struct ath5k_pdgain_info *pdg_L, *pdg_R; + struct ath5k_chan_pcal_info *pcinfo_L; + struct ath5k_chan_pcal_info *pcinfo_R; + struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + u8 *pdg_curve_to_idx = ee->ee_pdc_to_idx[ee_mode]; + s16 table_min[AR5K_EEPROM_N_PD_GAINS]; + s16 table_max[AR5K_EEPROM_N_PD_GAINS]; + u8 *tmpL; + u8 *tmpR; + u32 target = channel->center_freq; + int pdg, i; + + /* Get surounding freq piers for this channel */ + ath5k_get_chan_pcal_surrounding_piers(ah, channel, + &pcinfo_L, + &pcinfo_R); + + /* Loop over pd gain curves on + * surounding freq piers by index */ + for (pdg = 0; pdg < ee->ee_pd_gains[ee_mode]; pdg++) { + + /* Fill curves in reverse order + * from lower power (max gain) + * to higher power. Use curve -> idx + * backmaping we did on eeprom init */ + u8 idx = pdg_curve_to_idx[pdg]; + + /* Grab the needed curves by index */ + pdg_L = &pcinfo_L->pd_curves[idx]; + pdg_R = &pcinfo_R->pd_curves[idx]; + + /* Initialize the temp tables */ + tmpL = ah->ah_txpower.tmpL[pdg]; + tmpR = ah->ah_txpower.tmpR[pdg]; + + /* Set curve's x boundaries and create + * curves so that they cover the same + * range (if we don't do that one table + * will have values on some range and the + * other one won't have any so interpolation + * will fail) */ + table_min[pdg] = min(pdg_L->pd_pwr[0], + pdg_R->pd_pwr[0]) / 2; + + table_max[pdg] = max(pdg_L->pd_pwr[pdg_L->pd_points - 1], + pdg_R->pd_pwr[pdg_R->pd_points - 1]) / 2; + + /* Now create the curves on surrounding channels + * and interpolate if needed to get the final + * curve for this gain on this channel */ + switch (type) { + case AR5K_PWRTABLE_LINEAR_PCDAC: + /* Override min/max so that we don't loose + * accuracy (don't divide by 2) */ + table_min[pdg] = min(pdg_L->pd_pwr[0], + pdg_R->pd_pwr[0]); + + table_max[pdg] = + max(pdg_L->pd_pwr[pdg_L->pd_points - 1], + pdg_R->pd_pwr[pdg_R->pd_points - 1]); + + /* Override minimum so that we don't get + * out of bounds while extrapolating + * below. Don't do this when we have 2 + * curves and we are on the high power curve + * because table_min is ok in this case */ + if (!(ee->ee_pd_gains[ee_mode] > 1 && pdg == 0)) { + + table_min[pdg] = + ath5k_get_linear_pcdac_min(pdg_L->pd_step, + pdg_R->pd_step, + pdg_L->pd_pwr, + pdg_R->pd_pwr); + + /* Don't go too low because we will + * miss the upper part of the curve. + * Note: 126 = 31.5dB (max power supported) + * in 0.25dB units */ + if (table_max[pdg] - table_min[pdg] > 126) + table_min[pdg] = table_max[pdg] - 126; + } + + /* Fall through */ + case AR5K_PWRTABLE_PWR_TO_PCDAC: + case AR5K_PWRTABLE_PWR_TO_PDADC: + + ath5k_create_power_curve(table_min[pdg], + table_max[pdg], + pdg_L->pd_pwr, + pdg_L->pd_step, + pdg_L->pd_points, tmpL, type); + + /* We are in a calibration + * pier, no need to interpolate + * between freq piers */ + if (pcinfo_L == pcinfo_R) + continue; + + ath5k_create_power_curve(table_min[pdg], + table_max[pdg], + pdg_R->pd_pwr, + pdg_R->pd_step, + pdg_R->pd_points, tmpR, type); + break; + default: + return -EINVAL; + } + + /* Interpolate between curves + * of surounding freq piers to + * get the final curve for this + * pd gain. Re-use tmpL for interpolation + * output */ + for (i = 0; (i < (u16) (table_max[pdg] - table_min[pdg])) && + (i < AR5K_EEPROM_POWER_TABLE_SIZE); i++) { + tmpL[i] = (u8) ath5k_get_interpolated_value(target, + (s16) pcinfo_L->freq, + (s16) pcinfo_R->freq, + (s16) tmpL[i], + (s16) tmpR[i]); + } } + /* Now we have a set of curves for this + * channel on tmpL (x range is table_max - table_min + * and y values are tmpL[pdg][]) sorted in the same + * order as EEPROM (because we've used the backmaping). + * So for RF5112 it's from higher power to lower power + * and for RF2413 it's from lower power to higher power. + * For RF5111 we only have one curve. */ + + /* Fill min and max power levels for this + * channel by interpolating the values on + * surounding channels to complete the dataset */ + ah->ah_txpower.txp_min_pwr = ath5k_get_interpolated_value(target, + (s16) pcinfo_L->freq, + (s16) pcinfo_R->freq, + pcinfo_L->min_pwr, pcinfo_R->min_pwr); + + ah->ah_txpower.txp_max_pwr = ath5k_get_interpolated_value(target, + (s16) pcinfo_L->freq, + (s16) pcinfo_R->freq, + pcinfo_L->max_pwr, pcinfo_R->max_pwr); + + /* We are ready to go, fill PCDAC/PDADC + * table and write settings on hardware */ + switch (type) { + case AR5K_PWRTABLE_LINEAR_PCDAC: + /* For RF5112 we can have one or two curves + * and each curve covers a certain power lvl + * range so we need to do some more processing */ + ath5k_combine_linear_pcdac_curves(ah, table_min, table_max, + ee->ee_pd_gains[ee_mode]); + + /* Set txp.offset so that we can + * match max power value with max + * table index */ + ah->ah_txpower.txp_offset = 64 - (table_max[0] / 2); + + /* Write settings on hw */ + ath5k_setup_pcdac_table(ah); + break; + case AR5K_PWRTABLE_PWR_TO_PCDAC: + /* We are done for RF5111 since it has only + * one curve, just fit the curve on the table */ + ath5k_fill_pwr_to_pcdac_table(ah, table_min, table_max); + + /* No rate powertable adjustment for RF5111 */ + ah->ah_txpower.txp_min_idx = 0; + ah->ah_txpower.txp_offset = 0; + + /* Write settings on hw */ + ath5k_setup_pcdac_table(ah); + break; + case AR5K_PWRTABLE_PWR_TO_PDADC: + /* Set PDADC boundaries and fill + * final PDADC table */ + ath5k_combine_pwr_to_pdadc_curves(ah, table_min, table_max, + ee->ee_pd_gains[ee_mode]); + + /* Write settings on hw */ + ath5k_setup_pwr_to_pdadc_table(ah, pdg, pdg_curve_to_idx); + + /* Set txp.offset, note that table_min + * can be negative */ + ah->ah_txpower.txp_offset = table_min[0]; + break; + default: + return -EINVAL; + } + + return 0; +} + + +/* + * Per-rate tx power setting + * + * This is the code that sets the desired tx power (below + * maximum) on hw for each rate (we also have TPC that sets + * power per packet). We do that by providing an index on the + * PCDAC/PDADC table we set up. + */ + +/* + * Set rate power table + * + * For now we only limit txpower based on maximum tx power + * supported by hw (what's inside rate_info). We need to limit + * this even more, based on regulatory domain etc. + * + * Rate power table contains indices to PCDAC/PDADC table (0.5dB steps) + * and is indexed as follows: + * rates[0] - rates[7] -> OFDM rates + * rates[8] - rates[14] -> CCK rates + * rates[15] -> XR rates (they all have the same power) + */ +static void +ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr, + struct ath5k_rate_pcal_info *rate_info, + u8 ee_mode) +{ + unsigned int i; + u16 *rates; + + /* max_pwr is power level we got from driver/user in 0.5dB + * units, switch to 0.25dB units so we can compare */ + max_pwr *= 2; + max_pwr = min(max_pwr, (u16) ah->ah_txpower.txp_max_pwr) / 2; + + /* apply rate limits */ + rates = ah->ah_txpower.txp_rates_power_table; + + /* OFDM rates 6 to 24Mb/s */ + for (i = 0; i < 5; i++) + rates[i] = min(max_pwr, rate_info->target_power_6to24); + + /* Rest OFDM rates */ + rates[5] = min(rates[0], rate_info->target_power_36); + rates[6] = min(rates[0], rate_info->target_power_48); + rates[7] = min(rates[0], rate_info->target_power_54); + + /* CCK rates */ + /* 1L */ + rates[8] = min(rates[0], rate_info->target_power_6to24); + /* 2L */ + rates[9] = min(rates[0], rate_info->target_power_36); + /* 2S */ + rates[10] = min(rates[0], rate_info->target_power_36); + /* 5L */ + rates[11] = min(rates[0], rate_info->target_power_48); + /* 5S */ + rates[12] = min(rates[0], rate_info->target_power_48); + /* 11L */ + rates[13] = min(rates[0], rate_info->target_power_54); + /* 11S */ + rates[14] = min(rates[0], rate_info->target_power_54); + + /* XR rates */ + rates[15] = min(rates[0], rate_info->target_power_6to24); + + /* CCK rates have different peak to average ratio + * so we have to tweak their power so that gainf + * correction works ok. For this we use OFDM to + * CCK delta from eeprom */ + if ((ee_mode == AR5K_EEPROM_MODE_11G) && + (ah->ah_phy_revision < AR5K_SREV_PHY_5212A)) + for (i = 8; i <= 15; i++) + rates[i] -= ah->ah_txpower.txp_cck_ofdm_gainf_delta; + + ah->ah_txpower.txp_min_pwr = rates[7]; + ah->ah_txpower.txp_max_pwr = rates[0]; + ah->ah_txpower.txp_ofdm = rates[7]; +} + + +/* + * Set transmition power + */ +int +ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, + u8 ee_mode, u8 txpower) +{ + struct ath5k_rate_pcal_info rate_info; + u8 type; + int ret; + + ATH5K_TRACE(ah->ah_sc); + if (txpower > AR5K_TUNE_MAX_TXPOWER) { + ATH5K_ERR(ah->ah_sc, "invalid tx power: %u\n", txpower); + return -EINVAL; + } + if (txpower == 0) + txpower = AR5K_TUNE_DEFAULT_TXPOWER; + + /* Reset TX power values */ + memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower)); + ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER; + ah->ah_txpower.txp_min_pwr = 0; + ah->ah_txpower.txp_max_pwr = AR5K_TUNE_MAX_TXPOWER; + + /* Initialize TX power table */ + switch (ah->ah_radio) { + case AR5K_RF5111: + type = AR5K_PWRTABLE_PWR_TO_PCDAC; + break; + case AR5K_RF5112: + type = AR5K_PWRTABLE_LINEAR_PCDAC; + break; + case AR5K_RF2413: + case AR5K_RF5413: + case AR5K_RF2316: + case AR5K_RF2317: + case AR5K_RF2425: + type = AR5K_PWRTABLE_PWR_TO_PDADC; + break; + default: + return -EINVAL; + } + + /* FIXME: Only on channel/mode change */ + ret = ath5k_setup_channel_powertable(ah, channel, ee_mode, type); + if (ret) + return ret; + + /* Limit max power if we have a CTL available */ + ath5k_get_max_ctl_power(ah, channel); + + /* FIXME: Tx power limit for this regdomain + * XXX: Mac80211/CRDA will do that anyway ? */ + + /* FIXME: Antenna reduction stuff */ + + /* FIXME: Limit power on turbo modes */ + + /* FIXME: TPC scale reduction */ + + /* Get surounding channels for per-rate power table + * calibration */ + ath5k_get_rate_pcal_data(ah, channel, &rate_info); + + /* Setup rate power table */ + ath5k_setup_rate_powertable(ah, txpower, &rate_info, ee_mode); + + /* Write rate power table on hw */ ath5k_hw_reg_write(ah, AR5K_TXPOWER_OFDM(3, 24) | AR5K_TXPOWER_OFDM(2, 16) | AR5K_TXPOWER_OFDM(1, 8) | AR5K_TXPOWER_OFDM(0, 0), AR5K_PHY_TXPOWER_RATE1); @@ -1536,26 +2566,34 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, AR5K_TXPOWER_CCK(13, 16) | AR5K_TXPOWER_CCK(12, 8) | AR5K_TXPOWER_CCK(11, 0), AR5K_PHY_TXPOWER_RATE4); - if (ah->ah_txpower.txp_tpc) + /* FIXME: TPC support */ + if (ah->ah_txpower.txp_tpc) { ath5k_hw_reg_write(ah, AR5K_PHY_TXPOWER_RATE_MAX_TPC_ENABLE | AR5K_TUNE_MAX_TXPOWER, AR5K_PHY_TXPOWER_RATE_MAX); - else + + ath5k_hw_reg_write(ah, + AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_ACK) | + AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_CTS) | + AR5K_REG_MS(AR5K_TUNE_MAX_TXPOWER, AR5K_TPC_CHIRP), + AR5K_TPC); + } else { ath5k_hw_reg_write(ah, AR5K_PHY_TXPOWER_RATE_MAX | AR5K_TUNE_MAX_TXPOWER, AR5K_PHY_TXPOWER_RATE_MAX); + } return 0; } -int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power) +int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 mode, u8 txpower) { /*Just a try M.F.*/ struct ieee80211_channel *channel = &ah->ah_current_channel; ATH5K_TRACE(ah->ah_sc); ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_TXPOWER, - "changing txpower to %d\n", power); + "changing txpower to %d\n", txpower); - return ath5k_hw_txpower(ah, channel, power); + return ath5k_hw_txpower(ah, channel, mode, txpower); } #undef _ATH5K_PHY diff --git a/drivers/net/wireless/ath5k/reg.h b/drivers/net/wireless/ath5k/reg.h index 2dc008e1022..7070d1543cd 100644 --- a/drivers/net/wireless/ath5k/reg.h +++ b/drivers/net/wireless/ath5k/reg.h @@ -1554,6 +1554,19 @@ /*===5212 Specific PCU registers===*/ /* + * Transmit power control register + */ +#define AR5K_TPC 0x80e8 +#define AR5K_TPC_ACK 0x0000003f /* ack frames */ +#define AR5K_TPC_ACK_S 0 +#define AR5K_TPC_CTS 0x00003f00 /* cts frames */ +#define AR5K_TPC_CTS_S 8 +#define AR5K_TPC_CHIRP 0x003f0000 /* chirp frames */ +#define AR5K_TPC_CHIRP_S 16 +#define AR5K_TPC_DOPPLER 0x0f000000 /* doppler chirp span */ +#define AR5K_TPC_DOPPLER_S 24 + +/* * XR (eXtended Range) mode register */ #define AR5K_XRMODE 0x80c0 /* Register Address */ @@ -2550,6 +2563,12 @@ #define AR5K_PHY_TPC_RG1 0xa258 #define AR5K_PHY_TPC_RG1_NUM_PD_GAIN 0x0000c000 #define AR5K_PHY_TPC_RG1_NUM_PD_GAIN_S 14 +#define AR5K_PHY_TPC_RG1_PDGAIN_1 0x00030000 +#define AR5K_PHY_TPC_RG1_PDGAIN_1_S 16 +#define AR5K_PHY_TPC_RG1_PDGAIN_2 0x000c0000 +#define AR5K_PHY_TPC_RG1_PDGAIN_2_S 18 +#define AR5K_PHY_TPC_RG1_PDGAIN_3 0x00300000 +#define AR5K_PHY_TPC_RG1_PDGAIN_3_S 20 #define AR5K_PHY_TPC_RG5 0xa26C #define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP 0x0000000F diff --git a/drivers/net/wireless/ath5k/reset.c b/drivers/net/wireless/ath5k/reset.c index 685dc213eda..7a17d31b2fd 100644 --- a/drivers/net/wireless/ath5k/reset.c +++ b/drivers/net/wireless/ath5k/reset.c @@ -664,29 +664,35 @@ static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah, struct ieee80211_channel *channel, u8 *ant, u8 ee_mode) { struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom; + s16 cck_ofdm_pwr_delta; - /* Set CCK to OFDM power delta */ - if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) { - int16_t cck_ofdm_pwr_delta; - - /* Adjust power delta for channel 14 */ - if (channel->center_freq == 2484) - cck_ofdm_pwr_delta = - ((ee->ee_cck_ofdm_power_delta - - ee->ee_scaled_cck_delta) * 2) / 10; - else - cck_ofdm_pwr_delta = - (ee->ee_cck_ofdm_power_delta * 2) / 10; + /* Adjust power delta for channel 14 */ + if (channel->center_freq == 2484) + cck_ofdm_pwr_delta = + ((ee->ee_cck_ofdm_power_delta - + ee->ee_scaled_cck_delta) * 2) / 10; + else + cck_ofdm_pwr_delta = + (ee->ee_cck_ofdm_power_delta * 2) / 10; + /* Set CCK to OFDM power delta on tx power + * adjustment register */ + if (ah->ah_phy_revision >= AR5K_SREV_PHY_5212A) { if (channel->hw_value == CHANNEL_G) ath5k_hw_reg_write(ah, - AR5K_REG_SM((ee->ee_cck_ofdm_power_delta * -1), + AR5K_REG_SM((ee->ee_cck_ofdm_gain_delta * -1), AR5K_PHY_TX_PWR_ADJ_CCK_GAIN_DELTA) | AR5K_REG_SM((cck_ofdm_pwr_delta * -1), AR5K_PHY_TX_PWR_ADJ_CCK_PCDAC_INDEX), AR5K_PHY_TX_PWR_ADJ); else ath5k_hw_reg_write(ah, 0, AR5K_PHY_TX_PWR_ADJ); + } else { + /* For older revs we scale power on sw during tx power + * setup */ + ah->ah_txpower.txp_cck_ofdm_pwr_delta = cck_ofdm_pwr_delta; + ah->ah_txpower.txp_cck_ofdm_gainf_delta = + ee->ee_cck_ofdm_gain_delta; } /* Set antenna idle switch table */ @@ -994,7 +1000,8 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode, /* * Set TX power (FIXME) */ - ret = ath5k_hw_txpower(ah, channel, AR5K_TUNE_DEFAULT_TXPOWER); + ret = ath5k_hw_txpower(ah, channel, ee_mode, + AR5K_TUNE_DEFAULT_TXPOWER); if (ret) return ret; diff --git a/drivers/net/wireless/ath9k/ahb.c b/drivers/net/wireless/ath9k/ahb.c index 00cc7bb01f2..0e65c51ba17 100644 --- a/drivers/net/wireless/ath9k/ahb.c +++ b/drivers/net/wireless/ath9k/ahb.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2008-2009 Atheros Communications Inc. * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org> * Copyright (c) 2009 Imre Kaloz <kaloz@openwrt.org> * diff --git a/drivers/net/wireless/ath9k/ani.c b/drivers/net/wireless/ath9k/ani.c index a39eb760cbb..6c5e887d50d 100644 --- a/drivers/net/wireless/ath9k/ani.c +++ b/drivers/net/wireless/ath9k/ani.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2008-2009 Atheros Communications Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above diff --git a/drivers/net/wireless/ath9k/ani.h b/drivers/net/wireless/ath9k/ani.h index 7315761f6d7..08b4e7ed5ff 100644 --- a/drivers/net/wireless/ath9k/ani.h +++ b/drivers/net/wireless/ath9k/ani.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2008-2009 Atheros Communications Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above diff --git a/drivers/net/wireless/ath9k/ath9k.h b/drivers/net/wireless/ath9k/ath9k.h index b64be8e9a69..2689a08a284 100644 --- a/drivers/net/wireless/ath9k/ath9k.h +++ b/drivers/net/wireless/ath9k/ath9k.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2008-2009 Atheros Communications Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -295,13 +295,9 @@ struct ath_tx_control { enum ath9k_internal_frame_type frame_type; }; -struct ath_xmit_status { - int retries; - int flags; #define ATH_TX_ERROR 0x01 #define ATH_TX_XRETRY 0x02 #define ATH_TX_BAR 0x04 -}; /* All RSSI values are noise floor adjusted */ struct ath_tx_stat { @@ -390,6 +386,7 @@ void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid struct ath_vif { int av_bslot; + __le64 tsf_adjust; /* TSF adjustment for staggered beacons */ enum nl80211_iftype av_opmode; struct ath_buf *av_bcbuf; struct ath_tx_control av_btxctl; @@ -406,7 +403,7 @@ struct ath_vif { * number of beacon intervals, the game's up. */ #define BSTUCK_THRESH (9 * ATH_BCBUF) -#define ATH_BCBUF 1 +#define ATH_BCBUF 4 #define ATH_DEFAULT_BINTVAL 100 /* TU */ #define ATH_DEFAULT_BMISS_LIMIT 10 #define IEEE80211_MS_TO_TU(x) (((x) * 1000) / 1024) diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath9k/beacon.c index 039c78136c5..ec995730632 100644 --- a/drivers/net/wireless/ath9k/beacon.c +++ b/drivers/net/wireless/ath9k/beacon.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2008-2009 Atheros Communications Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -70,7 +70,8 @@ static void ath_beacon_setup(struct ath_softc *sc, struct ath_vif *avp, ds = bf->bf_desc; flags = ATH9K_TXDESC_NOACK; - if (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC && + if (((sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) || + (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) && (ah->caps.hw_caps & ATH9K_HW_CAP_VEOL)) { ds->ds_link = bf->bf_daddr; /* self-linked */ flags |= ATH9K_TXDESC_VEOL; @@ -153,6 +154,8 @@ static struct ath_buf *ath_beacon_generate(struct ieee80211_hw *hw, bf->bf_mpdu = skb; if (skb == NULL) return NULL; + ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp = + avp->tsf_adjust; info = IEEE80211_SKB_CB(skb); if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { @@ -253,7 +256,6 @@ int ath_beacon_alloc(struct ath_wiphy *aphy, struct ieee80211_vif *vif) { struct ath_softc *sc = aphy->sc; struct ath_vif *avp; - struct ieee80211_hdr *hdr; struct ath_buf *bf; struct sk_buff *skb; __le64 tstamp; @@ -316,42 +318,33 @@ int ath_beacon_alloc(struct ath_wiphy *aphy, struct ieee80211_vif *vif) tstamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp; sc->beacon.bc_tstamp = le64_to_cpu(tstamp); - - /* - * Calculate a TSF adjustment factor required for - * staggered beacons. Note that we assume the format - * of the beacon frame leaves the tstamp field immediately - * following the header. - */ + /* Calculate a TSF adjustment factor required for staggered beacons. */ if (avp->av_bslot > 0) { u64 tsfadjust; - __le64 val; int intval; intval = sc->hw->conf.beacon_int ? sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL; /* - * The beacon interval is in TU's; the TSF in usecs. - * We figure out how many TU's to add to align the - * timestamp then convert to TSF units and handle - * byte swapping before writing it in the frame. - * The hardware will then add this each time a beacon - * frame is sent. Note that we align vif's 1..N - * and leave vif 0 untouched. This means vap 0 - * has a timestamp in one beacon interval while the - * others get a timestamp aligned to the next interval. + * Calculate the TSF offset for this beacon slot, i.e., the + * number of usecs that need to be added to the timestamp field + * in Beacon and Probe Response frames. Beacon slot 0 is + * processed at the correct offset, so it does not require TSF + * adjustment. Other slots are adjusted to get the timestamp + * close to the TBTT for the BSS. */ - tsfadjust = (intval * (ATH_BCBUF - avp->av_bslot)) / ATH_BCBUF; - val = cpu_to_le64(tsfadjust << 10); /* TU->TSF */ + tsfadjust = intval * avp->av_bslot / ATH_BCBUF; + avp->tsf_adjust = cpu_to_le64(TU_TO_USEC(tsfadjust)); DPRINTF(sc, ATH_DBG_BEACON, "stagger beacons, bslot %d intval %u tsfadjust %llu\n", avp->av_bslot, intval, (unsigned long long)tsfadjust); - hdr = (struct ieee80211_hdr *)skb->data; - memcpy(&hdr[1], &val, sizeof(val)); - } + ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp = + avp->tsf_adjust; + } else + avp->tsf_adjust = cpu_to_le64(0); bf->bf_mpdu = skb; bf->bf_buf_addr = bf->bf_dmacontext = @@ -447,8 +440,16 @@ void ath_beacon_tasklet(unsigned long data) tsf = ath9k_hw_gettsf64(ah); tsftu = TSF_TO_TU(tsf>>32, tsf); slot = ((tsftu % intval) * ATH_BCBUF) / intval; - vif = sc->beacon.bslot[(slot + 1) % ATH_BCBUF]; - aphy = sc->beacon.bslot_aphy[(slot + 1) % ATH_BCBUF]; + /* + * Reverse the slot order to get slot 0 on the TBTT offset that does + * not require TSF adjustment and other slots adding + * slot/ATH_BCBUF * beacon_int to timestamp. For example, with + * ATH_BCBUF = 4, we process beacon slots as follows: 3 2 1 0 3 2 1 .. + * and slot 0 is at correct offset to TBTT. + */ + slot = ATH_BCBUF - slot - 1; + vif = sc->beacon.bslot[slot]; + aphy = sc->beacon.bslot_aphy[slot]; DPRINTF(sc, ATH_DBG_BEACON, "slot %d [tsf %llu tsftu %u intval %u] vif %p\n", @@ -728,6 +729,7 @@ void ath_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif) ath_beacon_config_ap(sc, &conf, avp); break; case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_MESH_POINT: ath_beacon_config_adhoc(sc, &conf, avp, vif); break; case NL80211_IFTYPE_STATION: diff --git a/drivers/net/wireless/ath9k/calib.c b/drivers/net/wireless/ath9k/calib.c index c9446fb6b15..e2d62e97131 100644 --- a/drivers/net/wireless/ath9k/calib.c +++ b/drivers/net/wireless/ath9k/calib.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2008-2009 Atheros Communications Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above diff --git a/drivers/net/wireless/ath9k/calib.h b/drivers/net/wireless/ath9k/calib.h index 32589e0c501..1c74bd50700 100644 --- a/drivers/net/wireless/ath9k/calib.h +++ b/drivers/net/wireless/ath9k/calib.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2008-2009 Atheros Communications Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above diff --git a/drivers/net/wireless/ath9k/debug.c b/drivers/net/wireless/ath9k/debug.c index 82573cadb1a..fdf9528fa49 100644 --- a/drivers/net/wireless/ath9k/debug.c +++ b/drivers/net/wireless/ath9k/debug.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2008-2009 Atheros Communications Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above diff --git a/drivers/net/wireless/ath9k/debug.h b/drivers/net/wireless/ath9k/debug.h index 065268b8568..7b0e5419d2b 100644 --- a/drivers/net/wireless/ath9k/debug.h +++ b/drivers/net/wireless/ath9k/debug.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2008-2009 Atheros Communications Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above diff --git a/drivers/net/wireless/ath9k/eeprom.c b/drivers/net/wireless/ath9k/eeprom.c index 183c949bcca..ffc36b0361c 100644 --- a/drivers/net/wireless/ath9k/eeprom.c +++ b/drivers/net/wireless/ath9k/eeprom.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2008-2009 Atheros Communications Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -342,8 +342,7 @@ static int ath9k_hw_4k_get_eeprom_rev(struct ath_hw *ah) static bool ath9k_hw_4k_fill_eeprom(struct ath_hw *ah) { #define SIZE_EEPROM_4K (sizeof(struct ar5416_eeprom_4k) / sizeof(u16)) - struct ar5416_eeprom_4k *eep = &ah->eeprom.map4k; - u16 *eep_data; + u16 *eep_data = (u16 *)&ah->eeprom.map4k; int addr, eep_start_loc = 0; eep_start_loc = 64; @@ -353,8 +352,6 @@ static bool ath9k_hw_4k_fill_eeprom(struct ath_hw *ah) "Reading from EEPROM, not flash\n"); } - eep_data = (u16 *)eep; - for (addr = 0; addr < SIZE_EEPROM_4K; addr++) { if (!ath9k_hw_nvram_read(ah, addr + eep_start_loc, eep_data)) { DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, @@ -363,6 +360,7 @@ static bool ath9k_hw_4k_fill_eeprom(struct ath_hw *ah) } eep_data++; } + return true; #undef SIZE_EEPROM_4K } @@ -379,16 +377,15 @@ static int ath9k_hw_4k_check_eeprom(struct ath_hw *ah) if (!ath9k_hw_use_flash(ah)) { - if (!ath9k_hw_nvram_read(ah, AR5416_EEPROM_MAGIC_OFFSET, &magic)) { - DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, + DPRINTF(ah->ah_sc, ATH_DBG_FATAL, "Reading Magic # failed\n"); return false; } DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, - "Read Magic = 0x%04X\n", magic); + "Read Magic = 0x%04X\n", magic); if (magic != AR5416_EEPROM_MAGIC) { magic2 = swab16(magic); @@ -401,16 +398,9 @@ static int ath9k_hw_4k_check_eeprom(struct ath_hw *ah) temp = swab16(*eepdata); *eepdata = temp; eepdata++; - - DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, - "0x%04X ", *eepdata); - - if (((addr + 1) % 6) == 0) - DPRINTF(ah->ah_sc, - ATH_DBG_EEPROM, "\n"); } } else { - DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, + DPRINTF(ah->ah_sc, ATH_DBG_FATAL, "Invalid EEPROM Magic. " "endianness mismatch.\n"); return -EINVAL; @@ -426,7 +416,7 @@ static int ath9k_hw_4k_check_eeprom(struct ath_hw *ah) else el = ah->eeprom.map4k.baseEepHeader.length; - if (el > sizeof(struct ar5416_eeprom_def)) + if (el > sizeof(struct ar5416_eeprom_4k)) el = sizeof(struct ar5416_eeprom_4k) / sizeof(u16); else el = el / sizeof(u16); @@ -441,7 +431,7 @@ static int ath9k_hw_4k_check_eeprom(struct ath_hw *ah) u16 word; DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, - "EEPROM Endianness is not native.. Changing \n"); + "EEPROM Endianness is not native.. Changing\n"); word = swab16(eep->baseEepHeader.length); eep->baseEepHeader.length = word; @@ -483,7 +473,7 @@ static int ath9k_hw_4k_check_eeprom(struct ath_hw *ah) if (sum != 0xffff || ah->eep_ops->get_eeprom_ver(ah) != AR5416_EEP_VER || ah->eep_ops->get_eeprom_rev(ah) < AR5416_EEP_NO_BACK_VER) { - DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, + DPRINTF(ah->ah_sc, ATH_DBG_FATAL, "Bad EEPROM checksum 0x%x or revision 0x%04x\n", sum, ah->eep_ops->get_eeprom_ver(ah)); return -EINVAL; @@ -1203,57 +1193,63 @@ static void ath9k_hw_4k_set_addac(struct ath_hw *ah, } } -static bool ath9k_hw_4k_set_board_values(struct ath_hw *ah, - struct ath9k_channel *chan) +static void ath9k_hw_4k_set_gain(struct ath_hw *ah, + struct modal_eep_4k_header *pModal, + struct ar5416_eeprom_4k *eep, + u8 txRxAttenLocal, int regChainOffset) { - struct modal_eep_4k_header *pModal; - struct ar5416_eeprom_4k *eep = &ah->eeprom.map4k; - int regChainOffset; - u8 txRxAttenLocal; - u8 ob[5], db1[5], db2[5]; - u8 ant_div_control1, ant_div_control2; - u32 regVal; - - - pModal = &eep->modalHeader; - - txRxAttenLocal = 23; - - REG_WRITE(ah, AR_PHY_SWITCH_COM, - ah->eep_ops->get_eeprom_antenna_cfg(ah, chan)); - - regChainOffset = 0; REG_WRITE(ah, AR_PHY_SWITCH_CHAIN_0 + regChainOffset, pModal->antCtrlChain[0]); REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0) + regChainOffset, - (REG_READ(ah, AR_PHY_TIMING_CTRL4(0) + regChainOffset) & - ~(AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF | - AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF)) | - SM(pModal->iqCalICh[0], AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF) | - SM(pModal->iqCalQCh[0], AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF)); + (REG_READ(ah, AR_PHY_TIMING_CTRL4(0) + regChainOffset) & + ~(AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF | + AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF)) | + SM(pModal->iqCalICh[0], AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF) | + SM(pModal->iqCalQCh[0], AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF)); if ((eep->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK) >= - AR5416_EEP_MINOR_VER_3) { + AR5416_EEP_MINOR_VER_3) { txRxAttenLocal = pModal->txRxAttenCh[0]; + REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset, - AR_PHY_GAIN_2GHZ_XATTEN1_MARGIN, pModal->bswMargin[0]); + AR_PHY_GAIN_2GHZ_XATTEN1_MARGIN, pModal->bswMargin[0]); REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset, - AR_PHY_GAIN_2GHZ_XATTEN1_DB, pModal->bswAtten[0]); + AR_PHY_GAIN_2GHZ_XATTEN1_DB, pModal->bswAtten[0]); REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset, - AR_PHY_GAIN_2GHZ_XATTEN2_MARGIN, - pModal->xatten2Margin[0]); + AR_PHY_GAIN_2GHZ_XATTEN2_MARGIN, + pModal->xatten2Margin[0]); REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset, - AR_PHY_GAIN_2GHZ_XATTEN2_DB, pModal->xatten2Db[0]); + AR_PHY_GAIN_2GHZ_XATTEN2_DB, pModal->xatten2Db[0]); } REG_RMW_FIELD(ah, AR_PHY_RXGAIN + regChainOffset, - AR9280_PHY_RXGAIN_TXRX_ATTEN, txRxAttenLocal); + AR9280_PHY_RXGAIN_TXRX_ATTEN, txRxAttenLocal); REG_RMW_FIELD(ah, AR_PHY_RXGAIN + regChainOffset, - AR9280_PHY_RXGAIN_TXRX_MARGIN, pModal->rxTxMarginCh[0]); + AR9280_PHY_RXGAIN_TXRX_MARGIN, pModal->rxTxMarginCh[0]); if (AR_SREV_9285_11(ah)) REG_WRITE(ah, AR9285_AN_TOP4, (AR9285_AN_TOP4_DEFAULT | 0x14)); +} + +static void ath9k_hw_4k_set_board_values(struct ath_hw *ah, + struct ath9k_channel *chan) +{ + struct modal_eep_4k_header *pModal; + struct ar5416_eeprom_4k *eep = &ah->eeprom.map4k; + u8 txRxAttenLocal; + u8 ob[5], db1[5], db2[5]; + u8 ant_div_control1, ant_div_control2; + u32 regVal; + + pModal = &eep->modalHeader; + txRxAttenLocal = 23; + + REG_WRITE(ah, AR_PHY_SWITCH_COM, + ah->eep_ops->get_eeprom_antenna_cfg(ah, chan)); + + /* Single chain for 4K EEPROM*/ + ath9k_hw_4k_set_gain(ah, pModal, eep, txRxAttenLocal, 0); /* Initialize Ant Diversity settings from EEPROM */ if (pModal->version == 3) { @@ -1295,9 +1291,6 @@ static bool ath9k_hw_4k_set_board_values(struct ath_hw *ah, db2[4] = ((pModal->db2_234 >> 8) & 0xf); } else if (pModal->version == 1) { - - DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, - "EEPROM Model version is set to 1 \n"); ob[0] = (pModal->ob_01 & 0xf); ob[1] = ob[2] = ob[3] = ob[4] = (pModal->ob_01 >> 4) & 0xf; db1[0] = (pModal->db1_01 & 0xf); @@ -1385,8 +1378,6 @@ static bool ath9k_hw_4k_set_board_values(struct ath_hw *ah, AR_PHY_SETTLING_SWITCH, pModal->swSettleHt40); } - - return true; } static u16 ath9k_hw_4k_get_eeprom_antenna_cfg(struct ath_hw *ah, @@ -1464,16 +1455,13 @@ static int ath9k_hw_def_get_eeprom_rev(struct ath_hw *ah) static bool ath9k_hw_def_fill_eeprom(struct ath_hw *ah) { #define SIZE_EEPROM_DEF (sizeof(struct ar5416_eeprom_def) / sizeof(u16)) - struct ar5416_eeprom_def *eep = &ah->eeprom.def; - u16 *eep_data; + u16 *eep_data = (u16 *)&ah->eeprom.def; int addr, ar5416_eep_start_loc = 0x100; - eep_data = (u16 *)eep; - for (addr = 0; addr < SIZE_EEPROM_DEF; addr++) { if (!ath9k_hw_nvram_read(ah, addr + ar5416_eep_start_loc, eep_data)) { - DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, + DPRINTF(ah->ah_sc, ATH_DBG_FATAL, "Unable to read eeprom region\n"); return false; } @@ -1492,17 +1480,14 @@ static int ath9k_hw_def_check_eeprom(struct ath_hw *ah) bool need_swap = false; int i, addr, size; - if (!ath9k_hw_nvram_read(ah, AR5416_EEPROM_MAGIC_OFFSET, - &magic)) { - DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, - "Reading Magic # failed\n"); + if (!ath9k_hw_nvram_read(ah, AR5416_EEPROM_MAGIC_OFFSET, &magic)) { + DPRINTF(ah->ah_sc, ATH_DBG_FATAL, "Reading Magic # failed\n"); return false; } if (!ath9k_hw_use_flash(ah)) { - DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, - "Read Magic = 0x%04X\n", magic); + "Read Magic = 0x%04X\n", magic); if (magic != AR5416_EEPROM_MAGIC) { magic2 = swab16(magic); @@ -1516,18 +1501,11 @@ static int ath9k_hw_def_check_eeprom(struct ath_hw *ah) temp = swab16(*eepdata); *eepdata = temp; eepdata++; - - DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, - "0x%04X ", *eepdata); - - if (((addr + 1) % 6) == 0) - DPRINTF(ah->ah_sc, - ATH_DBG_EEPROM, "\n"); } } else { - DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, + DPRINTF(ah->ah_sc, ATH_DBG_FATAL, "Invalid EEPROM Magic. " - "endianness mismatch.\n"); + "Endianness mismatch.\n"); return -EINVAL; } } @@ -1556,7 +1534,7 @@ static int ath9k_hw_def_check_eeprom(struct ath_hw *ah) u16 word; DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, - "EEPROM Endianness is not native.. Changing \n"); + "EEPROM Endianness is not native.. Changing.\n"); word = swab16(eep->baseEepHeader.length); eep->baseEepHeader.length = word; @@ -1602,7 +1580,7 @@ static int ath9k_hw_def_check_eeprom(struct ath_hw *ah) if (sum != 0xffff || ah->eep_ops->get_eeprom_ver(ah) != AR5416_EEP_VER || ah->eep_ops->get_eeprom_rev(ah) < AR5416_EEP_NO_BACK_VER) { - DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, + DPRINTF(ah->ah_sc, ATH_DBG_FATAL, "Bad EEPROM checksum 0x%x or revision 0x%04x\n", sum, ah->eep_ops->get_eeprom_ver(ah)); return -EINVAL; @@ -1614,7 +1592,6 @@ static int ath9k_hw_def_check_eeprom(struct ath_hw *ah) static u32 ath9k_hw_def_get_eeprom(struct ath_hw *ah, enum eeprom_param param) { -#define AR5416_VER_MASK (pBase->version & AR5416_EEP_VER_MINOR_MASK) struct ar5416_eeprom_def *eep = &ah->eeprom.def; struct modal_eep_header *pModal = eep->modalHeader; struct base_eep_header *pBase = &eep->baseEepHeader; @@ -1681,21 +1658,73 @@ static u32 ath9k_hw_def_get_eeprom(struct ath_hw *ah, default: return 0; } -#undef AR5416_VER_MASK } -/* XXX: Clean me up, make me more legible */ -static bool ath9k_hw_def_set_board_values(struct ath_hw *ah, +static void ath9k_hw_def_set_gain(struct ath_hw *ah, + struct modal_eep_header *pModal, + struct ar5416_eeprom_def *eep, + u8 txRxAttenLocal, int regChainOffset, int i) +{ + if (AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_3) { + txRxAttenLocal = pModal->txRxAttenCh[i]; + + if (AR_SREV_9280_10_OR_LATER(ah)) { + REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset, + AR_PHY_GAIN_2GHZ_XATTEN1_MARGIN, + pModal->bswMargin[i]); + REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset, + AR_PHY_GAIN_2GHZ_XATTEN1_DB, + pModal->bswAtten[i]); + REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset, + AR_PHY_GAIN_2GHZ_XATTEN2_MARGIN, + pModal->xatten2Margin[i]); + REG_RMW_FIELD(ah, AR_PHY_GAIN_2GHZ + regChainOffset, + AR_PHY_GAIN_2GHZ_XATTEN2_DB, + pModal->xatten2Db[i]); + } else { + REG_WRITE(ah, AR_PHY_GAIN_2GHZ + regChainOffset, + (REG_READ(ah, AR_PHY_GAIN_2GHZ + regChainOffset) & + ~AR_PHY_GAIN_2GHZ_BSW_MARGIN) + | SM(pModal-> bswMargin[i], + AR_PHY_GAIN_2GHZ_BSW_MARGIN)); + REG_WRITE(ah, AR_PHY_GAIN_2GHZ + regChainOffset, + (REG_READ(ah, AR_PHY_GAIN_2GHZ + regChainOffset) & + ~AR_PHY_GAIN_2GHZ_BSW_ATTEN) + | SM(pModal->bswAtten[i], + AR_PHY_GAIN_2GHZ_BSW_ATTEN)); + } + } + + if (AR_SREV_9280_10_OR_LATER(ah)) { + REG_RMW_FIELD(ah, + AR_PHY_RXGAIN + regChainOffset, + AR9280_PHY_RXGAIN_TXRX_ATTEN, txRxAttenLocal); + REG_RMW_FIELD(ah, + AR_PHY_RXGAIN + regChainOffset, + AR9280_PHY_RXGAIN_TXRX_MARGIN, pModal->rxTxMarginCh[i]); + } else { + REG_WRITE(ah, + AR_PHY_RXGAIN + regChainOffset, + (REG_READ(ah, AR_PHY_RXGAIN + regChainOffset) & + ~AR_PHY_RXGAIN_TXRX_ATTEN) + | SM(txRxAttenLocal, AR_PHY_RXGAIN_TXRX_ATTEN)); + REG_WRITE(ah, + AR_PHY_GAIN_2GHZ + regChainOffset, + (REG_READ(ah, AR_PHY_GAIN_2GHZ + regChainOffset) & + ~AR_PHY_GAIN_2GHZ_RXTX_MARGIN) | + SM(pModal->rxTxMarginCh[i], AR_PHY_GAIN_2GHZ_RXTX_MARGIN)); + } +} + +static void ath9k_hw_def_set_board_values(struct ath_hw *ah, struct ath9k_channel *chan) { -#define AR5416_VER_MASK (eep->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK) struct modal_eep_header *pModal; struct ar5416_eeprom_def *eep = &ah->eeprom.def; int i, regChainOffset; u8 txRxAttenLocal; pModal = &(eep->modalHeader[IS_CHAN_2GHZ(chan)]); - txRxAttenLocal = IS_CHAN_2GHZ(chan) ? 23 : 44; REG_WRITE(ah, AR_PHY_SWITCH_COM, @@ -1708,8 +1737,7 @@ static bool ath9k_hw_def_set_board_values(struct ath_hw *ah, } if (AR_SREV_5416_20_OR_LATER(ah) && - (ah->rxchainmask == 5 || ah->txchainmask == 5) - && (i != 0)) + (ah->rxchainmask == 5 || ah->txchainmask == 5) && (i != 0)) regChainOffset = (i == 1) ? 0x2000 : 0x1000; else regChainOffset = i * 0x1000; @@ -1718,9 +1746,7 @@ static bool ath9k_hw_def_set_board_values(struct ath_hw *ah, pModal->antCtrlChain[i]); REG_WRITE(ah, AR_PHY_TIMING_CTRL4(0) + regChainOffset, - (REG_READ(ah, - AR_PHY_TIMING_CTRL4(0) + - regChainOffset) & + (REG_READ(ah, AR_PHY_TIMING_CTRL4(0) + regChainOffset) & ~(AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF | AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF)) | SM(pModal->iqCalICh[i], @@ -1728,87 +1754,9 @@ static bool ath9k_hw_def_set_board_values(struct ath_hw *ah, SM(pModal->iqCalQCh[i], AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF)); - if ((i == 0) || AR_SREV_5416_20_OR_LATER(ah)) { - if (AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_3) { - txRxAttenLocal = pModal->txRxAttenCh[i]; - if (AR_SREV_9280_10_OR_LATER(ah)) { - REG_RMW_FIELD(ah, - AR_PHY_GAIN_2GHZ + - regChainOffset, - AR_PHY_GAIN_2GHZ_XATTEN1_MARGIN, - pModal-> - bswMargin[i]); - REG_RMW_FIELD(ah, - AR_PHY_GAIN_2GHZ + - regChainOffset, - AR_PHY_GAIN_2GHZ_XATTEN1_DB, - pModal-> - bswAtten[i]); - REG_RMW_FIELD(ah, - AR_PHY_GAIN_2GHZ + - regChainOffset, - AR_PHY_GAIN_2GHZ_XATTEN2_MARGIN, - pModal-> - xatten2Margin[i]); - REG_RMW_FIELD(ah, - AR_PHY_GAIN_2GHZ + - regChainOffset, - AR_PHY_GAIN_2GHZ_XATTEN2_DB, - pModal-> - xatten2Db[i]); - } else { - REG_WRITE(ah, - AR_PHY_GAIN_2GHZ + - regChainOffset, - (REG_READ(ah, - AR_PHY_GAIN_2GHZ + - regChainOffset) & - ~AR_PHY_GAIN_2GHZ_BSW_MARGIN) - | SM(pModal-> - bswMargin[i], - AR_PHY_GAIN_2GHZ_BSW_MARGIN)); - REG_WRITE(ah, - AR_PHY_GAIN_2GHZ + - regChainOffset, - (REG_READ(ah, - AR_PHY_GAIN_2GHZ + - regChainOffset) & - ~AR_PHY_GAIN_2GHZ_BSW_ATTEN) - | SM(pModal->bswAtten[i], - AR_PHY_GAIN_2GHZ_BSW_ATTEN)); - } - } - if (AR_SREV_9280_10_OR_LATER(ah)) { - REG_RMW_FIELD(ah, - AR_PHY_RXGAIN + - regChainOffset, - AR9280_PHY_RXGAIN_TXRX_ATTEN, - txRxAttenLocal); - REG_RMW_FIELD(ah, - AR_PHY_RXGAIN + - regChainOffset, - AR9280_PHY_RXGAIN_TXRX_MARGIN, - pModal->rxTxMarginCh[i]); - } else { - REG_WRITE(ah, - AR_PHY_RXGAIN + regChainOffset, - (REG_READ(ah, - AR_PHY_RXGAIN + - regChainOffset) & - ~AR_PHY_RXGAIN_TXRX_ATTEN) | - SM(txRxAttenLocal, - AR_PHY_RXGAIN_TXRX_ATTEN)); - REG_WRITE(ah, - AR_PHY_GAIN_2GHZ + - regChainOffset, - (REG_READ(ah, - AR_PHY_GAIN_2GHZ + - regChainOffset) & - ~AR_PHY_GAIN_2GHZ_RXTX_MARGIN) | - SM(pModal->rxTxMarginCh[i], - AR_PHY_GAIN_2GHZ_RXTX_MARGIN)); - } - } + if ((i == 0) || AR_SREV_5416_20_OR_LATER(ah)) + ath9k_hw_def_set_gain(ah, pModal, eep, txRxAttenLocal, + regChainOffset, i); } if (AR_SREV_9280_10_OR_LATER(ah)) { @@ -1855,8 +1803,6 @@ static bool ath9k_hw_def_set_board_values(struct ath_hw *ah, AR_AN_TOP2_LOCALBIAS, AR_AN_TOP2_LOCALBIAS_S, pModal->local_bias); - DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, "ForceXPAon: %d\n", - pModal->force_xpaon); REG_RMW_FIELD(ah, AR_PHY_XPA_CFG, AR_PHY_FORCE_XPA_CFG, pModal->force_xpaon); } @@ -1882,6 +1828,7 @@ static bool ath9k_hw_def_set_board_values(struct ath_hw *ah, REG_RMW_FIELD(ah, AR_PHY_RF_CTL3, AR_PHY_TX_END_TO_A2_RX_ON, pModal->txEndToRxOn); + if (AR_SREV_9280_10_OR_LATER(ah)) { REG_RMW_FIELD(ah, AR_PHY_CCA, AR9280_PHY_CCA_THRESH62, pModal->thresh62); @@ -1912,10 +1859,10 @@ static bool ath9k_hw_def_set_board_values(struct ath_hw *ah, } if (AR_SREV_9280_20_OR_LATER(ah) && - AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_19) + AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_19) REG_RMW_FIELD(ah, AR_PHY_CCK_TX_CTRL, - AR_PHY_CCK_TX_CTRL_TX_DAC_SCALE_CCK, - pModal->miscBits); + AR_PHY_CCK_TX_CTRL_TX_DAC_SCALE_CCK, + pModal->miscBits); if (AR_SREV_9280_20(ah) && AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_20) { @@ -1926,18 +1873,15 @@ static bool ath9k_hw_def_set_board_values(struct ath_hw *ah, REG_RMW_FIELD(ah, AR_AN_TOP1, AR_AN_TOP1_DACIPMODE, 0); else REG_RMW_FIELD(ah, AR_AN_TOP1, AR_AN_TOP1_DACIPMODE, - eep->baseEepHeader.dacLpMode); + eep->baseEepHeader.dacLpMode); REG_RMW_FIELD(ah, AR_PHY_FRAME_CTL, AR_PHY_FRAME_CTL_TX_CLIP, - pModal->miscBits >> 2); + pModal->miscBits >> 2); REG_RMW_FIELD(ah, AR_PHY_TX_PWRCTRL9, - AR_PHY_TX_DESIRED_SCALE_CCK, - eep->baseEepHeader.desiredScaleCCK); + AR_PHY_TX_DESIRED_SCALE_CCK, + eep->baseEepHeader.desiredScaleCCK); } - - return true; -#undef AR5416_VER_MASK } static void ath9k_hw_def_set_addac(struct ath_hw *ah, diff --git a/drivers/net/wireless/ath9k/eeprom.h b/drivers/net/wireless/ath9k/eeprom.h index d6f6108f63c..25b68c881ff 100644 --- a/drivers/net/wireless/ath9k/eeprom.h +++ b/drivers/net/wireless/ath9k/eeprom.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2008-2009 Atheros Communications Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -95,6 +95,7 @@ #define FREQ2FBIN(x, y) ((y) ? ((x) - 2300) : (((x) - 4800) / 5)) #define ath9k_hw_use_flash(_ah) (!(_ah->ah_flags & AH_USE_EEPROM)) +#define AR5416_VER_MASK (eep->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK) #define OLC_FOR_AR9280_20_LATER (AR_SREV_9280_20_OR_LATER(ah) && \ ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL)) @@ -489,7 +490,7 @@ struct eeprom_ops { u8 (*get_num_ant_config)(struct ath_hw *hw, enum ieee80211_band band); u16 (*get_eeprom_antenna_cfg)(struct ath_hw *hw, struct ath9k_channel *chan); - bool (*set_board_values)(struct ath_hw *hw, struct ath9k_channel *chan); + void (*set_board_values)(struct ath_hw *hw, struct ath9k_channel *chan); void (*set_addac)(struct ath_hw *hw, struct ath9k_channel *chan); int (*set_txpower)(struct ath_hw *hw, struct ath9k_channel *chan, u16 cfgCtl, u8 twiceAntennaReduction, diff --git a/drivers/net/wireless/ath9k/hw.c b/drivers/net/wireless/ath9k/hw.c index d494e98ba97..b15eaf8417f 100644 --- a/drivers/net/wireless/ath9k/hw.c +++ b/drivers/net/wireless/ath9k/hw.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2008-2009 Atheros Communications Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -588,6 +588,10 @@ static int ath9k_hw_post_attach(struct ath_hw *ah) ecode = ath9k_hw_eeprom_attach(ah); if (ecode != 0) return ecode; + + DPRINTF(ah->ah_sc, ATH_DBG_CONFIG, "Eeprom VER: %d, REV: %d\n", + ah->eep_ops->get_eeprom_ver(ah), ah->eep_ops->get_eeprom_rev(ah)); + ecode = ath9k_hw_rfattach(ah); if (ecode != 0) return ecode; @@ -1444,6 +1448,7 @@ static void ath9k_hw_set_operating_mode(struct ath_hw *ah, int opmode) REG_CLR_BIT(ah, AR_CFG, AR_CFG_AP_ADHOC_INDICATION); break; case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_MESH_POINT: REG_WRITE(ah, AR_STA_ID1, val | AR_STA_ID1_ADHOC | AR_STA_ID1_KSRCH_MODE); REG_SET_BIT(ah, AR_CFG, AR_CFG_AP_ADHOC_INDICATION); @@ -2273,11 +2278,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, else ath9k_hw_spur_mitigate(ah, chan); - if (!ah->eep_ops->set_board_values(ah, chan)) { - DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, - "error setting board options\n"); - return -EIO; - } + ah->eep_ops->set_board_values(ah, chan); ath9k_hw_decrease_chain_power(ah, chan); @@ -3149,6 +3150,7 @@ void ath9k_hw_beaconinit(struct ath_hw *ah, u32 next_beacon, u32 beacon_period) flags |= AR_TBTT_TIMER_EN; break; case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_MESH_POINT: REG_SET_BIT(ah, AR_TXCFG, AR_TXCFG_ADHOC_BEACON_ATIM_TX_POLICY); REG_WRITE(ah, AR_NEXT_NDP_TIMER, diff --git a/drivers/net/wireless/ath9k/hw.h b/drivers/net/wireless/ath9k/hw.h index dc681f011fd..0b594e0ee26 100644 --- a/drivers/net/wireless/ath9k/hw.h +++ b/drivers/net/wireless/ath9k/hw.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2008-2009 Atheros Communications Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above diff --git a/drivers/net/wireless/ath9k/initvals.h b/drivers/net/wireless/ath9k/initvals.h index 1d60c3706f1..e2f0a34b79a 100644 --- a/drivers/net/wireless/ath9k/initvals.h +++ b/drivers/net/wireless/ath9k/initvals.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2008-2009 Atheros Communications Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above diff --git a/drivers/net/wireless/ath9k/mac.c b/drivers/net/wireless/ath9k/mac.c index f757bc7eec6..e0a6dee4583 100644 --- a/drivers/net/wireless/ath9k/mac.c +++ b/drivers/net/wireless/ath9k/mac.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2008-2009 Atheros Communications Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above diff --git a/drivers/net/wireless/ath9k/mac.h b/drivers/net/wireless/ath9k/mac.h index a75f65dae1d..1176bce8b76 100644 --- a/drivers/net/wireless/ath9k/mac.h +++ b/drivers/net/wireless/ath9k/mac.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2008-2009 Atheros Communications Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index 8db75f6de53..13d4e6756c9 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2008-2009 Atheros Communications Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -940,18 +940,25 @@ static void ath_led_blink_work(struct work_struct *work) if (!(sc->sc_flags & SC_OP_LED_ASSOCIATED)) return; - ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, - (sc->sc_flags & SC_OP_LED_ON) ? 1 : 0); + + if ((sc->led_on_duration == ATH_LED_ON_DURATION_IDLE) || + (sc->led_off_duration == ATH_LED_OFF_DURATION_IDLE)) + ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 0); + else + ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, + (sc->sc_flags & SC_OP_LED_ON) ? 1 : 0); queue_delayed_work(sc->hw->workqueue, &sc->ath_led_blink_work, (sc->sc_flags & SC_OP_LED_ON) ? msecs_to_jiffies(sc->led_off_duration) : msecs_to_jiffies(sc->led_on_duration)); - sc->led_on_duration = - max((ATH_LED_ON_DURATION_IDLE - sc->led_on_cnt), 25); - sc->led_off_duration = - max((ATH_LED_OFF_DURATION_IDLE - sc->led_off_cnt), 10); + sc->led_on_duration = sc->led_on_cnt ? + max((ATH_LED_ON_DURATION_IDLE - sc->led_on_cnt), 25) : + ATH_LED_ON_DURATION_IDLE; + sc->led_off_duration = sc->led_off_cnt ? + max((ATH_LED_OFF_DURATION_IDLE - sc->led_off_cnt), 10) : + ATH_LED_OFF_DURATION_IDLE; sc->led_on_cnt = sc->led_off_cnt = 0; if (sc->sc_flags & SC_OP_LED_ON) sc->sc_flags &= ~SC_OP_LED_ON; @@ -1592,7 +1599,8 @@ void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw) hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_AP) | BIT(NL80211_IFTYPE_STATION) | - BIT(NL80211_IFTYPE_ADHOC); + BIT(NL80211_IFTYPE_ADHOC) | + BIT(NL80211_IFTYPE_MESH_POINT); hw->wiphy->reg_notifier = ath9k_reg_notifier; hw->wiphy->strict_regulatory = true; @@ -2200,18 +2208,13 @@ static int ath9k_add_interface(struct ieee80211_hw *hw, ic_opmode = NL80211_IFTYPE_STATION; break; case NL80211_IFTYPE_ADHOC: - if (sc->nbcnvifs >= ATH_BCBUF) { - ret = -ENOBUFS; - goto out; - } - ic_opmode = NL80211_IFTYPE_ADHOC; - break; case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_MESH_POINT: if (sc->nbcnvifs >= ATH_BCBUF) { ret = -ENOBUFS; goto out; } - ic_opmode = NL80211_IFTYPE_AP; + ic_opmode = conf->type; break; default: DPRINTF(sc, ATH_DBG_FATAL, @@ -2247,7 +2250,8 @@ static int ath9k_add_interface(struct ieee80211_hw *hw, * Note we only do this (at the moment) for station mode. */ if ((conf->type == NL80211_IFTYPE_STATION) || - (conf->type == NL80211_IFTYPE_ADHOC)) { + (conf->type == NL80211_IFTYPE_ADHOC) || + (conf->type == NL80211_IFTYPE_MESH_POINT)) { if (ath9k_hw_phycounters(sc->sc_ah)) sc->imask |= ATH9K_INT_MIB; sc->imask |= ATH9K_INT_TSFOOR; @@ -2294,8 +2298,9 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw, del_timer_sync(&sc->ani.timer); /* Reclaim beacon resources */ - if (sc->sc_ah->opmode == NL80211_IFTYPE_AP || - sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) { + if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) || + (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) || + (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) { ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq); ath_beacon_return(sc, avp); } @@ -2428,6 +2433,7 @@ static int ath9k_config_interface(struct ieee80211_hw *hw, switch (vif->type) { case NL80211_IFTYPE_STATION: case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_MESH_POINT: /* Set BSSID */ memcpy(sc->curbssid, conf->bssid, ETH_ALEN); memcpy(avp->bssid, conf->bssid, ETH_ALEN); @@ -2451,7 +2457,8 @@ static int ath9k_config_interface(struct ieee80211_hw *hw, } if ((vif->type == NL80211_IFTYPE_ADHOC) || - (vif->type == NL80211_IFTYPE_AP)) { + (vif->type == NL80211_IFTYPE_AP) || + (vif->type == NL80211_IFTYPE_MESH_POINT)) { if ((conf->changed & IEEE80211_IFCC_BEACON) || (conf->changed & IEEE80211_IFCC_BEACON_ENABLED && conf->enable_beacon)) { @@ -2723,7 +2730,7 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw, ieee80211_stop_tx_ba_cb_irqsafe(hw, sta->addr, tid); break; - case IEEE80211_AMPDU_TX_RESUME: + case IEEE80211_AMPDU_TX_OPERATIONAL: ath_tx_aggr_resume(sc, sta, tid); break; default: diff --git a/drivers/net/wireless/ath9k/pci.c b/drivers/net/wireless/ath9k/pci.c index 9a58baabb9c..6dbc58580ab 100644 --- a/drivers/net/wireless/ath9k/pci.c +++ b/drivers/net/wireless/ath9k/pci.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2008-2009 Atheros Communications Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -87,7 +87,6 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) struct ath_softc *sc; struct ieee80211_hw *hw; u8 csz; - u32 val; int ret = 0; struct ath_hw *ah; @@ -134,14 +133,6 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) pci_set_master(pdev); - /* - * Disable the RETRY_TIMEOUT register (0x41) to keep - * PCI Tx retries from interfering with C3 CPU state. - */ - pci_read_config_dword(pdev, 0x40, &val); - if ((val & 0x0000ff00) != 0) - pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); - ret = pci_request_region(pdev, 0, "ath9k"); if (ret) { dev_err(&pdev->dev, "PCI memory region reserve error\n"); @@ -253,21 +244,12 @@ static int ath_pci_resume(struct pci_dev *pdev) struct ieee80211_hw *hw = pci_get_drvdata(pdev); struct ath_wiphy *aphy = hw->priv; struct ath_softc *sc = aphy->sc; - u32 val; int err; err = pci_enable_device(pdev); if (err) return err; pci_restore_state(pdev); - /* - * Suspend/Resume resets the PCI configuration space, so we have to - * re-disable the RETRY_TIMEOUT register (0x41) to keep - * PCI Tx retries from interfering with C3 CPU state - */ - pci_read_config_dword(pdev, 0x40, &val); - if ((val & 0x0000ff00) != 0) - pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); /* Enable LED */ ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN, diff --git a/drivers/net/wireless/ath9k/phy.c b/drivers/net/wireless/ath9k/phy.c index e1494bae0f9..8bcba906929 100644 --- a/drivers/net/wireless/ath9k/phy.c +++ b/drivers/net/wireless/ath9k/phy.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2008-2009 Atheros Communications Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above diff --git a/drivers/net/wireless/ath9k/phy.h b/drivers/net/wireless/ath9k/phy.h index 1eac8c70734..0f7f8e0c9c9 100644 --- a/drivers/net/wireless/ath9k/phy.h +++ b/drivers/net/wireless/ath9k/phy.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2008-2009 Atheros Communications Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c index 832735677a4..824ccbb8b7b 100644 --- a/drivers/net/wireless/ath9k/rc.c +++ b/drivers/net/wireless/ath9k/rc.c @@ -1,6 +1,6 @@ /* * Copyright (c) 2004 Video54 Technologies, Inc. - * Copyright (c) 2004-2008 Atheros Communications, Inc. + * Copyright (c) 2004-2009 Atheros Communications, Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -864,6 +864,8 @@ static void ath_rc_ratefind(struct ath_softc *sc, rate_table, nrix, 1, 0); ath_rc_rate_set_series(rate_table, &rates[i++], txrc, try_per_rate, nrix, 0); + + tx_info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE; } else { try_per_rate = (ATH_11N_TXMAXTRY/4); /* Set the choosen rate. No RTS for first series entry. */ @@ -1468,16 +1470,18 @@ static void ath_rc_init(struct ath_softc *sc, ath_rc_priv->ht_cap); } -static u8 ath_rc_build_ht_caps(struct ath_softc *sc, bool is_ht, bool is_cw40, - bool is_sgi40) +static u8 ath_rc_build_ht_caps(struct ath_softc *sc, struct ieee80211_sta *sta, + bool is_cw40, bool is_sgi40) { u8 caps = 0; - if (is_ht) { + if (sta->ht_cap.ht_supported) { caps = WLAN_RC_HT_FLAG; if (sc->sc_ah->caps.tx_chainmask != 1 && - ath9k_hw_getcapability(sc->sc_ah, ATH9K_CAP_DS, 0, NULL)) - caps |= WLAN_RC_DS_FLAG; + ath9k_hw_getcapability(sc->sc_ah, ATH9K_CAP_DS, 0, NULL)) { + if (sta->ht_cap.mcs.rx_mask[1]) + caps |= WLAN_RC_DS_FLAG; + } if (is_cw40) caps |= WLAN_RC_40_FLAG; if (is_sgi40) @@ -1615,6 +1619,7 @@ static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband, /* Choose rate table first */ if ((sc->sc_ah->opmode == NL80211_IFTYPE_STATION) || + (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT) || (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC)) { rate_table = ath_choose_rate_table(sc, sband->band, sta->ht_cap.ht_supported, @@ -1624,8 +1629,7 @@ static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband, rate_table = sc->cur_rate_table; } - ath_rc_priv->ht_cap = ath_rc_build_ht_caps(sc, sta->ht_cap.ht_supported, - is_cw40, is_sgi40); + ath_rc_priv->ht_cap = ath_rc_build_ht_caps(sc, sta, is_cw40, is_sgi40); ath_rc_init(sc, priv_sta, sband, sta, rate_table); } @@ -1659,8 +1663,7 @@ static void ath_rate_update(void *priv, struct ieee80211_supported_band *sband, rate_table = ath_choose_rate_table(sc, sband->band, sta->ht_cap.ht_supported, oper_cw40); - ath_rc_priv->ht_cap = ath_rc_build_ht_caps(sc, - sta->ht_cap.ht_supported, + ath_rc_priv->ht_cap = ath_rc_build_ht_caps(sc, sta, oper_cw40, oper_sgi40); ath_rc_init(sc, priv_sta, sband, sta, rate_table); diff --git a/drivers/net/wireless/ath9k/rc.h b/drivers/net/wireless/ath9k/rc.h index db9b0b9a343..199a3ce57d6 100644 --- a/drivers/net/wireless/ath9k/rc.h +++ b/drivers/net/wireless/ath9k/rc.h @@ -1,7 +1,7 @@ /* * Copyright (c) 2004 Sam Leffler, Errno Consulting * Copyright (c) 2004 Video54 Technologies, Inc. - * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2008-2009 Atheros Communications Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c index 0bba17662a1..71cb18d6757 100644 --- a/drivers/net/wireless/ath9k/recv.c +++ b/drivers/net/wireless/ath9k/recv.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2008-2009 Atheros Communications Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -344,8 +344,13 @@ void ath_rx_cleanup(struct ath_softc *sc) list_for_each_entry(bf, &sc->rx.rxbuf, list) { skb = bf->bf_mpdu; - if (skb) + if (skb) { + dma_unmap_single(sc->dev, + bf->bf_buf_addr, + sc->rx.bufsize, + DMA_FROM_DEVICE); dev_kfree_skb(skb); + } } if (sc->rx.rxdma.dd_desc_len != 0) diff --git a/drivers/net/wireless/ath9k/reg.h b/drivers/net/wireless/ath9k/reg.h index d86e90e3817..52605246679 100644 --- a/drivers/net/wireless/ath9k/reg.h +++ b/drivers/net/wireless/ath9k/reg.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2008-2009 Atheros Communications Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above diff --git a/drivers/net/wireless/ath9k/regd.c b/drivers/net/wireless/ath9k/regd.c index b8f9b6d6bec..4ca62510229 100644 --- a/drivers/net/wireless/ath9k/regd.c +++ b/drivers/net/wireless/ath9k/regd.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2008-2009 Atheros Communications Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above diff --git a/drivers/net/wireless/ath9k/regd.h b/drivers/net/wireless/ath9k/regd.h index 8f885f3bc8d..9f5fbd4eea7 100644 --- a/drivers/net/wireless/ath9k/regd.h +++ b/drivers/net/wireless/ath9k/regd.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2008-2009 Atheros Communications Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above diff --git a/drivers/net/wireless/ath9k/regd_common.h b/drivers/net/wireless/ath9k/regd_common.h index b41d0002f3f..4d0e298cd1c 100644 --- a/drivers/net/wireless/ath9k/regd_common.h +++ b/drivers/net/wireless/ath9k/regd_common.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2008-2009 Atheros Communications Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c index e3f376611f8..689bdbf7880 100644 --- a/drivers/net/wireless/ath9k/xmit.c +++ b/drivers/net/wireless/ath9k/xmit.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2008 Atheros Communications Inc. + * Copyright (c) 2008-2009 Atheros Communications Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -64,6 +64,10 @@ static void ath_tx_complete_buf(struct ath_softc *sc, struct ath_buf *bf, static void ath_tx_txqaddbuf(struct ath_softc *sc, struct ath_txq *txq, struct list_head *head); static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf); +static int ath_tx_num_badfrms(struct ath_softc *sc, struct ath_buf *bf, + int txok); +static void ath_tx_rc_status(struct ath_buf *bf, struct ath_desc *ds, + int nbad, int txok, bool update_rc); /*********************/ /* Aggregation logic */ @@ -274,9 +278,10 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, struct ath_buf *bf_next, *bf_last = bf->bf_lastbf; struct ath_desc *ds = bf_last->bf_desc; struct list_head bf_head, bf_pending; - u16 seq_st = 0; + u16 seq_st = 0, acked_cnt = 0, txfail_cnt = 0; u32 ba[WME_BA_BMP_SIZE >> 5]; - int isaggr, txfail, txpending, sendbar = 0, needreset = 0; + int isaggr, txfail, txpending, sendbar = 0, needreset = 0, nbad = 0; + bool rc_update = true; skb = (struct sk_buff *)bf->bf_mpdu; hdr = (struct ieee80211_hdr *)skb->data; @@ -316,6 +321,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, INIT_LIST_HEAD(&bf_pending); INIT_LIST_HEAD(&bf_head); + nbad = ath_tx_num_badfrms(sc, bf, txok); while (bf) { txfail = txpending = 0; bf_next = bf->bf_next; @@ -323,8 +329,10 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, if (ATH_BA_ISSET(ba, ATH_BA_INDEX(seq_st, bf->bf_seqno))) { /* transmit completion, subframe is * acked by block ack */ + acked_cnt++; } else if (!isaggr && txok) { /* transmit completion */ + acked_cnt++; } else { if (!(tid->state & AGGR_CLEANUP) && ds->ds_txstat.ts_flags != ATH9K_TX_SW_ABORTED) { @@ -335,6 +343,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, bf->bf_state.bf_type |= BUF_XRETRY; txfail = 1; sendbar = 1; + txfail_cnt++; } } else { /* @@ -361,6 +370,13 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, ath_tx_update_baw(sc, tid, bf->bf_seqno); spin_unlock_bh(&txq->axq_lock); + if (rc_update && (acked_cnt == 1 || txfail_cnt == 1)) { + ath_tx_rc_status(bf, ds, nbad, txok, true); + rc_update = false; + } else { + ath_tx_rc_status(bf, ds, nbad, txok, false); + } + ath_tx_complete_buf(sc, bf, &bf_head, !txfail, sendbar); } else { /* retry the un-acked ones */ @@ -1734,7 +1750,7 @@ exit: /*****************/ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, - struct ath_xmit_status *tx_status) + int tx_flags) { struct ieee80211_hw *hw = sc->hw; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); @@ -1755,18 +1771,14 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, tx_info->rate_driver_data[0] = NULL; } - if (tx_status->flags & ATH_TX_BAR) { + if (tx_flags & ATH_TX_BAR) tx_info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; - tx_status->flags &= ~ATH_TX_BAR; - } - if (!(tx_status->flags & (ATH_TX_ERROR | ATH_TX_XRETRY))) { + if (!(tx_flags & (ATH_TX_ERROR | ATH_TX_XRETRY))) { /* Frame was ACKed */ tx_info->flags |= IEEE80211_TX_STAT_ACK; } - tx_info->status.rates[0].count = tx_status->retries + 1; - hdrlen = ieee80211_get_hdrlen_from_skb(skb); padsize = hdrlen & 3; if (padsize && hdrlen >= 24) { @@ -1789,29 +1801,22 @@ static void ath_tx_complete_buf(struct ath_softc *sc, struct ath_buf *bf, int txok, int sendbar) { struct sk_buff *skb = bf->bf_mpdu; - struct ath_xmit_status tx_status; unsigned long flags; + int tx_flags = 0; - /* - * Set retry information. - * NB: Don't use the information in the descriptor, because the frame - * could be software retried. - */ - tx_status.retries = bf->bf_retries; - tx_status.flags = 0; if (sendbar) - tx_status.flags = ATH_TX_BAR; + tx_flags = ATH_TX_BAR; if (!txok) { - tx_status.flags |= ATH_TX_ERROR; + tx_flags |= ATH_TX_ERROR; if (bf_isxretried(bf)) - tx_status.flags |= ATH_TX_XRETRY; + tx_flags |= ATH_TX_XRETRY; } dma_unmap_single(sc->dev, bf->bf_dmacontext, skb->len, DMA_TO_DEVICE); - ath_tx_complete(sc, skb, &tx_status); + ath_tx_complete(sc, skb, tx_flags); /* * Return the list of ath_buf of this mpdu to free queue @@ -1852,27 +1857,40 @@ static int ath_tx_num_badfrms(struct ath_softc *sc, struct ath_buf *bf, return nbad; } -static void ath_tx_rc_status(struct ath_buf *bf, struct ath_desc *ds, int nbad) +static void ath_tx_rc_status(struct ath_buf *bf, struct ath_desc *ds, + int nbad, int txok, bool update_rc) { struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); struct ath_tx_info_priv *tx_info_priv = ATH_TX_INFO_PRIV(tx_info); + struct ieee80211_hw *hw = tx_info_priv->aphy->hw; + u8 i, tx_rateindex; + + if (txok) + tx_info->status.ack_signal = ds->ds_txstat.ts_rssi; - tx_info_priv->update_rc = false; + tx_rateindex = ds->ds_txstat.ts_rateindex; + WARN_ON(tx_rateindex >= hw->max_rates); + + tx_info_priv->update_rc = update_rc; if (ds->ds_txstat.ts_status & ATH9K_TXERR_FILT) tx_info->flags |= IEEE80211_TX_STAT_TX_FILTERED; if ((ds->ds_txstat.ts_status & ATH9K_TXERR_FILT) == 0 && - (bf->bf_flags & ATH9K_TXDESC_NOACK) == 0) { + (bf->bf_flags & ATH9K_TXDESC_NOACK) == 0 && update_rc) { if (ieee80211_is_data(hdr->frame_control)) { memcpy(&tx_info_priv->tx, &ds->ds_txstat, sizeof(tx_info_priv->tx)); tx_info_priv->n_frames = bf->bf_nframes; tx_info_priv->n_bad_frames = nbad; - tx_info_priv->update_rc = true; } } + + for (i = tx_rateindex + 1; i < hw->max_rates; i++) + tx_info->status.rates[i].count = 0; + + tx_info->status.rates[tx_rateindex].count = bf->bf_retries + 1; } static void ath_wake_mac80211_queue(struct ath_softc *sc, struct ath_txq *txq) @@ -1897,7 +1915,7 @@ static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) struct ath_buf *bf, *lastbf, *bf_held = NULL; struct list_head bf_head; struct ath_desc *ds; - int txok, nbad = 0; + int txok; int status; DPRINTF(sc, ATH_DBG_QUEUE, "tx queue %d (%x), link %p\n", @@ -1991,13 +2009,9 @@ static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) bf->bf_retries = ds->ds_txstat.ts_longretry; if (ds->ds_txstat.ts_status & ATH9K_TXERR_XRETRY) bf->bf_state.bf_type |= BUF_XRETRY; - nbad = 0; - } else { - nbad = ath_tx_num_badfrms(sc, bf, txok); + ath_tx_rc_status(bf, ds, 0, txok, true); } - ath_tx_rc_status(bf, ds, nbad); - if (bf_isampdu(bf)) ath_tx_complete_aggr(sc, txq, bf, &bf_head, txok); else diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index b72ef3fd315..4896e083111 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -3993,6 +3993,8 @@ static void setup_struct_wldev_for_init(struct b43_wldev *dev) dev->irq_reason = 0; memset(dev->dma_reason, 0, sizeof(dev->dma_reason)); dev->irq_savedstate = B43_IRQ_MASKTEMPLATE; + if (b43_modparam_verbose < B43_VERBOSITY_DEBUG) + dev->irq_savedstate &= ~B43_IRQ_PHY_TXERR; dev->mac_suspended = 1; diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index 0f53c7e5e01..a63d88841df 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -50,7 +50,7 @@ static int b43_plcp_get_bitrate_idx_cck(struct b43_plcp_hdr6 *plcp) } /* Extract the bitrate index out of an OFDM PLCP header. */ -static u8 b43_plcp_get_bitrate_idx_ofdm(struct b43_plcp_hdr6 *plcp, bool aphy) +static int b43_plcp_get_bitrate_idx_ofdm(struct b43_plcp_hdr6 *plcp, bool aphy) { int base = aphy ? 0 : 4; diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-hw.h b/drivers/net/wireless/iwlwifi/iwl-3945-hw.h index 205603d082a..73f93a0ff2d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-hw.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945-hw.h @@ -233,7 +233,7 @@ struct iwl3945_eeprom { #define PCI_CFG_REV_ID_BIT_RTP (0x80) /* bit 7 */ #define TFD_QUEUE_MIN 0 -#define TFD_QUEUE_MAX 6 +#define TFD_QUEUE_MAX 5 /* 4 DATA + 1 CMD */ #define IWL_NUM_SCAN_RATES (2) diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c index f65c308a671..af6b9d44477 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c @@ -124,7 +124,7 @@ static struct iwl3945_tpt_entry iwl3945_tpt_table_g[] = { #define IWL39_RATE_HIGH_TH 11520 #define IWL_SUCCESS_UP_TH 8960 #define IWL_SUCCESS_DOWN_TH 10880 -#define IWL_RATE_MIN_FAILURE_TH 8 +#define IWL_RATE_MIN_FAILURE_TH 6 #define IWL_RATE_MIN_SUCCESS_TH 8 #define IWL_RATE_DECREASE_TH 1920 #define IWL_RATE_RETRY_TH 15 @@ -488,7 +488,7 @@ static void rs_tx_status(void *priv_rate, struct ieee80211_supported_band *sband IWL_DEBUG_RATE(priv, "enter\n"); - retries = info->status.rates[0].count - 1; + retries = info->status.rates[0].count; /* Sanity Check for retries */ if (retries > IWL_RATE_RETRY_TH) retries = IWL_RATE_RETRY_TH; @@ -791,16 +791,15 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, if ((window->success_ratio < IWL_RATE_DECREASE_TH) || !current_tpt) { IWL_DEBUG_RATE(priv, "decrease rate because of low success_ratio\n"); scale_action = -1; - /* No throughput measured yet for adjacent rates, * try increase */ } else if ((low_tpt == IWL_INVALID_VALUE) && (high_tpt == IWL_INVALID_VALUE)) { - if (high != IWL_RATE_INVALID && window->success_counter >= IWL_RATE_INCREASE_TH) + if (high != IWL_RATE_INVALID && window->success_ratio >= IWL_RATE_INCREASE_TH) scale_action = 1; else if (low != IWL_RATE_INVALID) - scale_action = -1; + scale_action = 0; /* Both adjacent throughputs are measured, but neither one has * better throughput; we're using the best rate, don't change @@ -826,14 +825,14 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, else { IWL_DEBUG_RATE(priv, "decrease rate because of high tpt\n"); - scale_action = -1; + scale_action = 0; } } else if (low_tpt != IWL_INVALID_VALUE) { if (low_tpt > current_tpt) { IWL_DEBUG_RATE(priv, "decrease rate because of low tpt\n"); scale_action = -1; - } else if (window->success_counter >= IWL_RATE_INCREASE_TH) { + } else if (window->success_ratio >= IWL_RATE_INCREASE_TH) { /* Lower rate has better * throughput,decrease rate */ scale_action = 1; diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index ba7e720e73c..2399328e8de 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -293,7 +293,7 @@ static void iwl3945_tx_queue_reclaim(struct iwl_priv *priv, if (iwl_queue_space(q) > q->low_mark && (txq_id >= 0) && (txq_id != IWL_CMD_QUEUE_NUM) && priv->mac80211_registered) - ieee80211_wake_queue(priv->hw, txq_id); + iwl_wake_queue(priv, txq_id); } /** @@ -747,11 +747,6 @@ void iwl3945_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq) int i; int counter; - /* classify bd */ - if (txq->q.id == IWL_CMD_QUEUE_NUM) - /* nothing to cleanup after for host commands */ - return; - /* sanity check */ counter = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags)); if (counter > NUM_TFD_CHUNKS) { @@ -1046,7 +1041,7 @@ static int iwl3945_txq_ctx_reset(struct iwl_priv *priv) goto error; /* Tx queue(s) */ - for (txq_id = 0; txq_id < TFD_QUEUE_MAX; txq_id++) { + for (txq_id = 0; txq_id <= priv->hw_params.max_txq_num; txq_id++) { slots_num = (txq_id == IWL_CMD_QUEUE_NUM) ? TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS; rc = iwl_tx_queue_init(priv, &priv->txq[txq_id], slots_num, @@ -1184,7 +1179,7 @@ int iwl3945_hw_nic_init(struct iwl_priv *priv) IWL_DEBUG_INFO(priv, "HW Revision ID = 0x%X\n", rev_id); rc = priv->cfg->ops->lib->apm_ops.set_pwr_src(priv, IWL_PWR_SRC_VMAIN); - if(rc) + if (rc) return rc; priv->cfg->ops->lib->apm_ops.config(priv); @@ -1239,8 +1234,12 @@ void iwl3945_hw_txq_ctx_free(struct iwl_priv *priv) int txq_id; /* Tx queues */ - for (txq_id = 0; txq_id < TFD_QUEUE_MAX; txq_id++) - iwl_tx_queue_free(priv, txq_id); + for (txq_id = 0; txq_id <= priv->hw_params.max_txq_num; txq_id++) + if (txq_id == IWL_CMD_QUEUE_NUM) + iwl_cmd_queue_free(priv); + else + iwl_tx_queue_free(priv, txq_id); + } void iwl3945_hw_txq_ctx_stop(struct iwl_priv *priv) @@ -1259,7 +1258,7 @@ void iwl3945_hw_txq_ctx_stop(struct iwl_priv *priv) iwl_write_prph(priv, ALM_SCD_MODE_REG, 0); /* reset TFD queues */ - for (txq_id = 0; txq_id < TFD_QUEUE_MAX; txq_id++) { + for (txq_id = 0; txq_id <= priv->hw_params.max_txq_num; txq_id++) { iwl_write_direct32(priv, FH39_TCSR_CONFIG(txq_id), 0x0); iwl_poll_direct_bit(priv, FH39_TSSR_TX_STATUS, FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(txq_id), @@ -2488,6 +2487,9 @@ int iwl3945_hw_set_hw_params(struct iwl_priv *priv) return -ENOMEM; } + /* Assign number of Usable TX queues */ + priv->hw_params.max_txq_num = TFD_QUEUE_MAX; + priv->hw_params.tfd_size = sizeof(struct iwl3945_tfd); priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_3K; priv->hw_params.max_pkt_size = 2342; diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index bd0140be774..847a6220c5e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -2178,10 +2178,9 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv, (iwl_queue_space(&txq->q) > txq->q.low_mark) && (agg->state != IWL_EMPTYING_HW_QUEUE_DELBA)) { if (agg->state == IWL_AGG_OFF) - ieee80211_wake_queue(priv->hw, txq_id); + iwl_wake_queue(priv, txq_id); else - ieee80211_wake_queue(priv->hw, - txq->swq_id); + iwl_wake_queue(priv, txq->swq_id); } } } else { @@ -2205,7 +2204,7 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv, if (priv->mac80211_registered && (iwl_queue_space(&txq->q) > txq->q.low_mark)) - ieee80211_wake_queue(priv->hw, txq_id); + iwl_wake_queue(priv, txq_id); } if (qc && likely(sta_id != IWL_INVALID_STATION)) diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index 08c19bea71e..e5ca2511a81 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -1077,7 +1077,7 @@ static int iwl5000_txq_agg_disable(struct iwl_priv *priv, u16 txq_id, if ((IWL50_FIRST_AMPDU_QUEUE > txq_id) || (IWL50_FIRST_AMPDU_QUEUE + IWL50_NUM_AMPDU_QUEUES <= txq_id)) { - IWL_WARN(priv, + IWL_ERR(priv, "queue number out of range: %d, must be %d to %d\n", txq_id, IWL50_FIRST_AMPDU_QUEUE, IWL50_FIRST_AMPDU_QUEUE + IWL50_NUM_AMPDU_QUEUES - 1); @@ -1295,10 +1295,9 @@ static void iwl5000_rx_reply_tx(struct iwl_priv *priv, (iwl_queue_space(&txq->q) > txq->q.low_mark) && (agg->state != IWL_EMPTYING_HW_QUEUE_DELBA)) { if (agg->state == IWL_AGG_OFF) - ieee80211_wake_queue(priv->hw, txq_id); + iwl_wake_queue(priv, txq_id); else - ieee80211_wake_queue(priv->hw, - txq->swq_id); + iwl_wake_queue(priv, txq->swq_id); } } } else { @@ -1324,7 +1323,7 @@ static void iwl5000_rx_reply_tx(struct iwl_priv *priv, if (priv->mac80211_registered && (iwl_queue_space(&txq->q) > txq->q.low_mark)) - ieee80211_wake_queue(priv->hw, txq_id); + iwl_wake_queue(priv, txq_id); } if (ieee80211_is_data_qos(tx_resp->frame_ctrl)) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 0db3bc011ac..663dc83be50 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1567,9 +1567,8 @@ static void iwl_alive_start(struct iwl_priv *priv) if (iwl_is_associated(priv)) { struct iwl_rxon_cmd *active_rxon = (struct iwl_rxon_cmd *)&priv->active_rxon; - - memcpy(&priv->staging_rxon, &priv->active_rxon, - sizeof(priv->staging_rxon)); + /* apply any changes in staging */ + priv->staging_rxon.filter_flags |= RXON_FILTER_ASSOC_MSK; active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK; } else { /* Initialize our rx_config data */ @@ -2184,110 +2183,112 @@ static int iwl_mac_config(struct ieee80211_hw *hw, u32 changed) struct iwl_priv *priv = hw->priv; const struct iwl_channel_info *ch_info; struct ieee80211_conf *conf = &hw->conf; - unsigned long flags; + unsigned long flags = 0; int ret = 0; - u16 channel; + u16 ch; + int scan_active = 0; mutex_lock(&priv->mutex); - IWL_DEBUG_MAC80211(priv, "enter to channel %d\n", conf->channel->hw_value); + IWL_DEBUG_MAC80211(priv, "enter to channel %d changed 0x%X\n", + conf->channel->hw_value, changed); - priv->current_ht_config.is_ht = conf_is_ht(conf); - - if (conf->radio_enabled && iwl_radio_kill_sw_enable_radio(priv)) { - IWL_DEBUG_MAC80211(priv, "leave - RF-KILL - waiting for uCode\n"); - goto out; + if (unlikely(!priv->cfg->mod_params->disable_hw_scan && + test_bit(STATUS_SCANNING, &priv->status))) { + scan_active = 1; + IWL_DEBUG_MAC80211(priv, "leave - scanning\n"); } - if (!conf->radio_enabled) - iwl_radio_kill_sw_disable_radio(priv); - if (!iwl_is_ready(priv)) { - IWL_DEBUG_MAC80211(priv, "leave - not ready\n"); - ret = -EIO; - goto out; - } + /* during scanning mac80211 will delay channel setting until + * scan finish with changed = 0 + */ + if (!changed || (changed & IEEE80211_CONF_CHANGE_CHANNEL)) { + if (scan_active) + goto set_ch_out; + + ch = ieee80211_frequency_to_channel(conf->channel->center_freq); + ch_info = iwl_get_channel_info(priv, conf->channel->band, ch); + if (!is_channel_valid(ch_info)) { + IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n"); + ret = -EINVAL; + goto set_ch_out; + } - if (unlikely(!priv->cfg->mod_params->disable_hw_scan && - test_bit(STATUS_SCANNING, &priv->status))) { - IWL_DEBUG_MAC80211(priv, "leave - scanning\n"); - mutex_unlock(&priv->mutex); - return 0; - } + if (priv->iw_mode == NL80211_IFTYPE_ADHOC && + !is_channel_ibss(ch_info)) { + IWL_ERR(priv, "channel %d in band %d not " + "IBSS channel\n", + conf->channel->hw_value, conf->channel->band); + ret = -EINVAL; + goto set_ch_out; + } - channel = ieee80211_frequency_to_channel(conf->channel->center_freq); - ch_info = iwl_get_channel_info(priv, conf->channel->band, channel); - if (!is_channel_valid(ch_info)) { - IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n"); - ret = -EINVAL; - goto out; - } + priv->current_ht_config.is_ht = conf_is_ht(conf); - if (priv->iw_mode == NL80211_IFTYPE_ADHOC && - !is_channel_ibss(ch_info)) { - IWL_ERR(priv, "channel %d in band %d not IBSS channel\n", - conf->channel->hw_value, conf->channel->band); - ret = -EINVAL; - goto out; - } + spin_lock_irqsave(&priv->lock, flags); - spin_lock_irqsave(&priv->lock, flags); + /* if we are switching from ht to 2.4 clear flags + * from any ht related info since 2.4 does not + * support ht */ + if ((le16_to_cpu(priv->staging_rxon.channel) != ch)) + priv->staging_rxon.flags = 0; - /* if we are switching from ht to 2.4 clear flags - * from any ht related info since 2.4 does not - * support ht */ - if ((le16_to_cpu(priv->staging_rxon.channel) != channel) -#ifdef IEEE80211_CONF_CHANNEL_SWITCH - && !(conf->flags & IEEE80211_CONF_CHANNEL_SWITCH) -#endif - ) - priv->staging_rxon.flags = 0; + iwl_set_rxon_channel(priv, conf->channel); - iwl_set_rxon_channel(priv, conf->channel); + iwl_set_flags_for_band(priv, conf->channel->band); + spin_unlock_irqrestore(&priv->lock, flags); + set_ch_out: + /* The list of supported rates and rate mask can be different + * for each band; since the band may have changed, reset + * the rate mask to what mac80211 lists */ + iwl_set_rate(priv); + } - iwl_set_flags_for_band(priv, conf->channel->band); + if (changed & IEEE80211_CONF_CHANGE_PS) { + if (conf->flags & IEEE80211_CONF_PS) + ret = iwl_power_set_user_mode(priv, IWL_POWER_INDEX_3); + else + ret = iwl_power_set_user_mode(priv, IWL_POWER_MODE_CAM); + if (ret) + IWL_DEBUG_MAC80211(priv, "Error setting power level\n"); - /* The list of supported rates and rate mask can be different - * for each band; since the band may have changed, reset - * the rate mask to what mac80211 lists */ - iwl_set_rate(priv); + } - spin_unlock_irqrestore(&priv->lock, flags); + if (changed & IEEE80211_CONF_CHANGE_POWER) { + IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n", + priv->tx_power_user_lmt, conf->power_level); -#ifdef IEEE80211_CONF_CHANNEL_SWITCH - if (conf->flags & IEEE80211_CONF_CHANNEL_SWITCH) { - iwl_hw_channel_switch(priv, conf->channel); - goto out; + iwl_set_tx_power(priv, conf->power_level, false); + } + + /* call to ensure that 4965 rx_chain is set properly in monitor mode */ + iwl_set_rxon_chain(priv); + + if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED) { + if (conf->radio_enabled && + iwl_radio_kill_sw_enable_radio(priv)) { + IWL_DEBUG_MAC80211(priv, "leave - RF-KILL - " + "waiting for uCode\n"); + goto out; + } + + if (!conf->radio_enabled) + iwl_radio_kill_sw_disable_radio(priv); } -#endif if (!conf->radio_enabled) { IWL_DEBUG_MAC80211(priv, "leave - radio disabled\n"); goto out; } - if (iwl_is_rfkill(priv)) { - IWL_DEBUG_MAC80211(priv, "leave - RF kill\n"); - ret = -EIO; + if (!iwl_is_ready(priv)) { + IWL_DEBUG_MAC80211(priv, "leave - not ready\n"); goto out; } - if (conf->flags & IEEE80211_CONF_PS) - ret = iwl_power_set_user_mode(priv, IWL_POWER_INDEX_3); - else - ret = iwl_power_set_user_mode(priv, IWL_POWER_MODE_CAM); - if (ret) - IWL_DEBUG_MAC80211(priv, "Error setting power level\n"); - - IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n", - priv->tx_power_user_lmt, conf->power_level); - - iwl_set_tx_power(priv, conf->power_level, false); - - iwl_set_rate(priv); - - /* call to ensure that 4965 rx_chain is set properly in monitor mode */ - iwl_set_rxon_chain(priv); + if (scan_active) + goto out; if (memcmp(&priv->active_rxon, &priv->staging_rxon, sizeof(priv->staging_rxon))) @@ -2295,9 +2296,9 @@ static int iwl_mac_config(struct ieee80211_hw *hw, u32 changed) else IWL_DEBUG_INFO(priv, "No re-sending same RXON configuration.\n"); - IWL_DEBUG_MAC80211(priv, "leave\n"); out: + IWL_DEBUG_MAC80211(priv, "leave\n"); mutex_unlock(&priv->mutex); return ret; } @@ -2682,6 +2683,7 @@ static int iwl_mac_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_sta *sta, u16 tid, u16 *ssn) { struct iwl_priv *priv = hw->priv; + int ret; IWL_DEBUG_HT(priv, "A-MPDU action on addr %pM tid %d\n", sta->addr, tid); @@ -2695,13 +2697,21 @@ static int iwl_mac_ampdu_action(struct ieee80211_hw *hw, return iwl_sta_rx_agg_start(priv, sta->addr, tid, *ssn); case IEEE80211_AMPDU_RX_STOP: IWL_DEBUG_HT(priv, "stop Rx\n"); - return iwl_sta_rx_agg_stop(priv, sta->addr, tid); + ret = iwl_sta_rx_agg_stop(priv, sta->addr, tid); + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return 0; + else + return ret; case IEEE80211_AMPDU_TX_START: IWL_DEBUG_HT(priv, "start Tx\n"); return iwl_tx_agg_start(priv, sta->addr, tid, ssn); case IEEE80211_AMPDU_TX_STOP: IWL_DEBUG_HT(priv, "stop Tx\n"); - return iwl_tx_agg_stop(priv, sta->addr, tid); + ret = iwl_tx_agg_stop(priv, sta->addr, tid); + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) + return 0; + else + return ret; default: IWL_DEBUG_HT(priv, "unknown\n"); return -EINVAL; @@ -3083,11 +3093,6 @@ static ssize_t store_power_level(struct device *d, mutex_lock(&priv->mutex); - if (!iwl_is_ready(priv)) { - ret = -EAGAIN; - goto out; - } - ret = strict_strtoul(buf, 10, &mode); if (ret) goto out; diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 085e9cf1cac..c54fb93e9d7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -1298,6 +1298,7 @@ int iwl_setup_mac(struct iwl_priv *priv) hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM | IEEE80211_HW_AMPDU_AGGREGATION | + IEEE80211_HW_SPECTRUM_MGMT | IEEE80211_HW_SUPPORTS_PS; hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | @@ -1308,9 +1309,6 @@ int iwl_setup_mac(struct iwl_priv *priv) /* Default value; 4 EDCA QOS priorities */ hw->queues = 4; - /* queues to support 11n aggregation */ - if (priv->cfg->sku & IWL_SKU_N) - hw->ampdu_queues = priv->cfg->mod_params->num_of_ampdu_queues; hw->conf.beacon_int = 100; hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL; @@ -1437,6 +1435,10 @@ int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force) priv->tx_power_user_lmt = tx_power; + /* if nic is not up don't send command */ + if (!iwl_is_ready_rf(priv)) + return ret; + if (force && priv->cfg->ops->lib->send_tx_power) ret = priv->cfg->ops->lib->send_tx_power(priv); diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 27310fec2e4..a8eac8c3c1f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -264,6 +264,7 @@ void iwl_rx_reply_error(struct iwl_priv *priv, * RX ******************************************************/ void iwl_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq); +void iwl_cmd_queue_free(struct iwl_priv *priv); int iwl_rx_queue_alloc(struct iwl_priv *priv); void iwl_rx_handle(struct iwl_priv *priv); int iwl_rx_queue_update_write_ptr(struct iwl_priv *priv, diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c index 36cfeccfafb..64eb585f157 100644 --- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c +++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c @@ -425,6 +425,56 @@ static ssize_t iwl_dbgfs_channels_read(struct file *file, char __user *user_buf, return ret; } +static ssize_t iwl_dbgfs_status_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) { + + struct iwl_priv *priv = (struct iwl_priv *)file->private_data; + char buf[512]; + int pos = 0; + const size_t bufsz = sizeof(buf); + + pos += scnprintf(buf + pos, bufsz - pos, "STATUS_HCMD_ACTIVE:\t %d\n", + test_bit(STATUS_HCMD_ACTIVE, &priv->status)); + pos += scnprintf(buf + pos, bufsz - pos, "STATUS_HCMD_SYNC_ACTIVE: %d\n", + test_bit(STATUS_HCMD_SYNC_ACTIVE, &priv->status)); + pos += scnprintf(buf + pos, bufsz - pos, "STATUS_INT_ENABLED:\t %d\n", + test_bit(STATUS_INT_ENABLED, &priv->status)); + pos += scnprintf(buf + pos, bufsz - pos, "STATUS_RF_KILL_HW:\t %d\n", + test_bit(STATUS_RF_KILL_HW, &priv->status)); + pos += scnprintf(buf + pos, bufsz - pos, "STATUS_RF_KILL_SW:\t %d\n", + test_bit(STATUS_RF_KILL_SW, &priv->status)); + pos += scnprintf(buf + pos, bufsz - pos, "STATUS_INIT:\t\t %d\n", + test_bit(STATUS_INIT, &priv->status)); + pos += scnprintf(buf + pos, bufsz - pos, "STATUS_ALIVE:\t\t %d\n", + test_bit(STATUS_ALIVE, &priv->status)); + pos += scnprintf(buf + pos, bufsz - pos, "STATUS_READY:\t\t %d\n", + test_bit(STATUS_READY, &priv->status)); + pos += scnprintf(buf + pos, bufsz - pos, "STATUS_TEMPERATURE:\t %d\n", + test_bit(STATUS_TEMPERATURE, &priv->status)); + pos += scnprintf(buf + pos, bufsz - pos, "STATUS_GEO_CONFIGURED:\t %d\n", + test_bit(STATUS_GEO_CONFIGURED, &priv->status)); + pos += scnprintf(buf + pos, bufsz - pos, "STATUS_EXIT_PENDING:\t %d\n", + test_bit(STATUS_EXIT_PENDING, &priv->status)); + pos += scnprintf(buf + pos, bufsz - pos, "STATUS_IN_SUSPEND:\t %d\n", + test_bit(STATUS_IN_SUSPEND, &priv->status)); + pos += scnprintf(buf + pos, bufsz - pos, "STATUS_STATISTICS:\t %d\n", + test_bit(STATUS_STATISTICS, &priv->status)); + pos += scnprintf(buf + pos, bufsz - pos, "STATUS_SCANNING:\t %d\n", + test_bit(STATUS_SCANNING, &priv->status)); + pos += scnprintf(buf + pos, bufsz - pos, "STATUS_SCAN_ABORTING:\t %d\n", + test_bit(STATUS_SCAN_ABORTING, &priv->status)); + pos += scnprintf(buf + pos, bufsz - pos, "STATUS_SCAN_HW:\t\t %d\n", + test_bit(STATUS_SCAN_HW, &priv->status)); + pos += scnprintf(buf + pos, bufsz - pos, "STATUS_POWER_PMI:\t %d\n", + test_bit(STATUS_POWER_PMI, &priv->status)); + pos += scnprintf(buf + pos, bufsz - pos, "STATUS_FW_ERROR:\t %d\n", + test_bit(STATUS_FW_ERROR, &priv->status)); + pos += scnprintf(buf + pos, bufsz - pos, "STATUS_MODE_PENDING:\t %d\n", + test_bit(STATUS_MODE_PENDING, &priv->status)); + return simple_read_from_buffer(user_buf, count, ppos, buf, pos); +} + DEBUGFS_READ_WRITE_FILE_OPS(sram); DEBUGFS_WRITE_FILE_OPS(log_event); DEBUGFS_READ_FILE_OPS(eeprom); @@ -432,6 +482,7 @@ DEBUGFS_READ_FILE_OPS(stations); DEBUGFS_READ_FILE_OPS(rx_statistics); DEBUGFS_READ_FILE_OPS(tx_statistics); DEBUGFS_READ_FILE_OPS(channels); +DEBUGFS_READ_FILE_OPS(status); /* * Create the debugfs files and directories @@ -466,7 +517,7 @@ int iwl_dbgfs_register(struct iwl_priv *priv, const char *name) DEBUGFS_ADD_FILE(rx_statistics, data); DEBUGFS_ADD_FILE(tx_statistics, data); DEBUGFS_ADD_FILE(channels, data); - DEBUGFS_ADD_X32(status, data, (u32 *)&priv->status); + DEBUGFS_ADD_FILE(status, data); DEBUGFS_ADD_BOOL(disable_sensitivity, rf, &priv->disable_sens_cal); DEBUGFS_ADD_BOOL(disable_chain_noise, rf, &priv->disable_chain_noise_cal); @@ -496,6 +547,7 @@ void iwl_dbgfs_unregister(struct iwl_priv *priv) DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_log_event); DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_stations); DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_channels); + DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_status); DEBUGFS_REMOVE(priv->dbgfs->dir_data); DEBUGFS_REMOVE(priv->dbgfs->dbgfs_rf_files.file_disable_sensitivity); DEBUGFS_REMOVE(priv->dbgfs->dbgfs_rf_files.file_disable_chain_noise); diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 0baae802282..ec9a13846ed 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -996,6 +996,12 @@ struct iwl_priv { u8 key_mapping_key; unsigned long ucode_key_table; + /* queue refcounts */ +#define IWL_MAX_HW_QUEUES 32 + unsigned long queue_stopped[BITS_TO_LONGS(IWL_MAX_HW_QUEUES)]; + /* for each AC */ + atomic_t queue_stop_count[4]; + /* Indication if ieee80211_ops->open has been called */ u8 is_open; diff --git a/drivers/net/wireless/iwlwifi/iwl-helpers.h b/drivers/net/wireless/iwlwifi/iwl-helpers.h index fb64d297dd4..a1328c3c81a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-helpers.h +++ b/drivers/net/wireless/iwlwifi/iwl-helpers.h @@ -93,4 +93,56 @@ static inline int iwl_alloc_fw_desc(struct pci_dev *pci_dev, return (desc->v_addr != NULL) ? 0 : -ENOMEM; } +/* + * we have 8 bits used like this: + * + * 7 6 5 4 3 2 1 0 + * | | | | | | | | + * | | | | | | +-+-------- AC queue (0-3) + * | | | | | | + * | +-+-+-+-+------------ HW A-MPDU queue + * | + * +---------------------- indicates agg queue + */ +static inline u8 iwl_virtual_agg_queue_num(u8 ac, u8 hwq) +{ + BUG_ON(ac > 3); /* only have 2 bits */ + BUG_ON(hwq > 31); /* only have 5 bits */ + + return 0x80 | (hwq << 2) | ac; +} + +static inline void iwl_wake_queue(struct iwl_priv *priv, u8 queue) +{ + u8 ac = queue; + u8 hwq = queue; + + if (queue & 0x80) { + ac = queue & 3; + hwq = (queue >> 2) & 0x1f; + } + + if (test_and_clear_bit(hwq, priv->queue_stopped)) + if (atomic_dec_return(&priv->queue_stop_count[ac]) <= 0) + ieee80211_wake_queue(priv->hw, ac); +} + +static inline void iwl_stop_queue(struct iwl_priv *priv, u8 queue) +{ + u8 ac = queue; + u8 hwq = queue; + + if (queue & 0x80) { + ac = queue & 3; + hwq = (queue >> 2) & 0x1f; + } + + if (!test_and_set_bit(hwq, priv->queue_stopped)) + if (atomic_inc_return(&priv->queue_stop_count[ac]) > 0) + ieee80211_stop_queue(priv->hw, ac); +} + +#define ieee80211_stop_queue DO_NOT_USE_ieee80211_stop_queue +#define ieee80211_wake_queue DO_NOT_USE_ieee80211_wake_queue + #endif /* __iwl_helpers_h__ */ diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c index 18b7e4195ea..47c894530eb 100644 --- a/drivers/net/wireless/iwlwifi/iwl-power.c +++ b/drivers/net/wireless/iwlwifi/iwl-power.c @@ -273,7 +273,7 @@ int iwl_power_update_mode(struct iwl_priv *priv, bool force) if (priv->iw_mode != NL80211_IFTYPE_STATION) final_mode = IWL_POWER_MODE_CAM; - if (!iwl_is_rfkill(priv) && !setting->power_disabled && + if (iwl_is_ready_rf(priv) && !setting->power_disabled && ((setting->power_mode != final_mode) || force)) { struct iwl_powertable_cmd cmd; diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 1684490d93c..5798fe49c77 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -1138,8 +1138,10 @@ int iwl_sta_rx_agg_stop(struct iwl_priv *priv, const u8 *addr, int tid) int sta_id; sta_id = iwl_find_station(priv, addr); - if (sta_id == IWL_INVALID_STATION) + if (sta_id == IWL_INVALID_STATION) { + IWL_ERR(priv, "Invalid station for AGG tid %d\n", tid); return -ENXIO; + } spin_lock_irqsave(&priv->sta_lock, flags); priv->stations[sta_id].sta.station_flags_msk = 0; diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index dff60fb7021..1f117a49c56 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -174,7 +174,7 @@ EXPORT_SYMBOL(iwl_tx_queue_free); * Free all buffers. * 0-fill, but do not free "txq" descriptor structure. */ -static void iwl_cmd_queue_free(struct iwl_priv *priv) +void iwl_cmd_queue_free(struct iwl_priv *priv) { struct iwl_tx_queue *txq = &priv->txq[IWL_CMD_QUEUE_NUM]; struct iwl_queue *q = &txq->q; @@ -193,12 +193,14 @@ static void iwl_cmd_queue_free(struct iwl_priv *priv) /* De-alloc circular buffer of TFDs */ if (txq->q.n_bd) - pci_free_consistent(dev, sizeof(struct iwl_tfd) * + pci_free_consistent(dev, priv->hw_params.tfd_size * txq->q.n_bd, txq->tfds, txq->q.dma_addr); /* 0-fill queue descriptor structure */ memset(txq, 0, sizeof(*txq)); } +EXPORT_SYMBOL(iwl_cmd_queue_free); + /*************** DMA-QUEUE-GENERAL-FUNCTIONS ***** * DMA services * @@ -761,8 +763,10 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) hdr->seq_ctrl |= cpu_to_le16(seq_number); seq_number += 0x10; /* aggregation is on for this <sta,tid> */ - if (info->flags & IEEE80211_TX_CTL_AMPDU) + if (info->flags & IEEE80211_TX_CTL_AMPDU) { txq_id = priv->stations[sta_id].tid[tid].agg.txq_id; + swq_id = iwl_virtual_agg_queue_num(swq_id, txq_id); + } priv->stations[sta_id].tid[tid].tfds_in_queue++; } @@ -893,7 +897,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) iwl_txq_update_write_ptr(priv, txq); spin_unlock_irqrestore(&priv->lock, flags); } else { - ieee80211_stop_queue(priv->hw, txq->swq_id); + iwl_stop_queue(priv, txq->swq_id); } } @@ -1221,8 +1225,10 @@ int iwl_tx_agg_stop(struct iwl_priv *priv , const u8 *ra, u16 tid) sta_id = iwl_find_station(priv, ra); - if (sta_id == IWL_INVALID_STATION) + if (sta_id == IWL_INVALID_STATION) { + IWL_ERR(priv, "Invalid station for AGG tid %d\n", tid); return -ENXIO; + } if (priv->stations[sta_id].tid[tid].agg.state != IWL_AGG_ON) IWL_WARN(priv, "Stopping AGG while state not IWL_AGG_ON\n"); @@ -1429,7 +1435,7 @@ void iwl_rx_reply_compressed_ba(struct iwl_priv *priv, if ((iwl_queue_space(&txq->q) > txq->q.low_mark) && priv->mac80211_registered && (agg->state != IWL_EMPTYING_HW_QUEUE_DELBA)) - ieee80211_wake_queue(priv->hw, txq->swq_id); + iwl_wake_queue(priv, txq->swq_id); iwl_txq_check_empty(priv, sta_id, tid, scd_flow); } diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 4465320f273..a71b08ca7c7 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -485,14 +485,14 @@ static int iwl3945_set_ccmp_dynamic_key_info(struct iwl_priv *priv, memcpy(priv->stations_39[sta_id].sta.key.key, keyconf->key, keyconf->keylen); - if ((priv->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK) + if ((priv->stations_39[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC) - priv->stations[sta_id].sta.key.key_offset = + priv->stations_39[sta_id].sta.key.key_offset = iwl_get_free_ucode_key_index(priv); /* else, we are overriding an existing key => no need to allocated room * in uCode. */ - WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, + WARN(priv->stations_39[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, "no space for a new key"); priv->stations_39[sta_id].sta.key.key_flags = key_flags; @@ -560,7 +560,7 @@ static int iwl3945_set_dynamic_key(struct iwl_priv *priv, ret = iwl3945_set_wep_dynamic_key_info(priv, keyconf, sta_id); break; default: - IWL_ERR(priv,"Unknown alg: %s alg = %d\n", __func__, keyconf->alg); + IWL_ERR(priv, "Unknown alg: %s alg = %d\n", __func__, keyconf->alg); ret = -EINVAL; } @@ -1168,7 +1168,7 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) spin_unlock_irqrestore(&priv->lock, flags); } - ieee80211_stop_queue(priv->hw, skb_get_queue_mapping(skb)); + iwl_stop_queue(priv, skb_get_queue_mapping(skb)); } return 0; @@ -3773,15 +3773,19 @@ static int iwl3945_mac_config(struct ieee80211_hw *hw, u32 changed) } #endif - if (conf->radio_enabled && iwl_radio_kill_sw_enable_radio(priv)) { - IWL_DEBUG_MAC80211(priv, "leave - RF-KILL - waiting for uCode\n"); - goto out; - } + if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED) { + if (conf->radio_enabled && + iwl_radio_kill_sw_enable_radio(priv)) { + IWL_DEBUG_MAC80211(priv, "leave - RF-KILL - " + "waiting for uCode\n"); + goto out; + } - if (!conf->radio_enabled) { - iwl_radio_kill_sw_disable_radio(priv); - IWL_DEBUG_MAC80211(priv, "leave - radio disabled\n"); - goto out; + if (!conf->radio_enabled) { + iwl_radio_kill_sw_disable_radio(priv); + IWL_DEBUG_MAC80211(priv, "leave - radio disabled\n"); + goto out; + } } if (iwl_is_rfkill(priv)) { @@ -4546,11 +4550,6 @@ static ssize_t store_power_level(struct device *d, mutex_lock(&priv->mutex); - if (!iwl_is_ready(priv)) { - ret = -EAGAIN; - goto out; - } - ret = strict_strtoul(buf, 10, &mode); if (ret) goto out; @@ -4905,7 +4904,8 @@ static int iwl3945_setup_mac(struct iwl_priv *priv) /* Tell mac80211 our characteristics */ hw->flags = IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_NOISE_DBM; + IEEE80211_HW_NOISE_DBM | + IEEE80211_HW_SPECTRUM_MGMT; hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | diff --git a/drivers/net/wireless/libertas/radiotap.h b/drivers/net/wireless/libertas/radiotap.h index f8eb9097ff0..d16b26416e8 100644 --- a/drivers/net/wireless/libertas/radiotap.h +++ b/drivers/net/wireless/libertas/radiotap.h @@ -33,22 +33,12 @@ struct rx_radiotap_hdr { struct ieee80211_radiotap_header hdr; u8 flags; u8 rate; - u16 chan_freq; - u16 chan_flags; - u8 antenna; u8 antsignal; - u16 rx_flags; -#if 0 - u8 pad[IEEE80211_RADIOTAP_HDRLEN - 18]; -#endif } __attribute__ ((packed)); #define RX_RADIOTAP_PRESENT ( \ (1 << IEEE80211_RADIOTAP_FLAGS) | \ (1 << IEEE80211_RADIOTAP_RATE) | \ - (1 << IEEE80211_RADIOTAP_CHANNEL) | \ - (1 << IEEE80211_RADIOTAP_ANTENNA) | \ (1 << IEEE80211_RADIOTAP_DB_ANTSIGNAL) |\ - (1 << IEEE80211_RADIOTAP_RX_FLAGS) | \ 0) diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c index 4f60948dde9..63d7e19ce9b 100644 --- a/drivers/net/wireless/libertas/rx.c +++ b/drivers/net/wireless/libertas/rx.c @@ -351,19 +351,11 @@ static int process_rxed_802_11_packet(struct lbs_private *priv, radiotap_hdr.hdr.it_pad = 0; radiotap_hdr.hdr.it_len = cpu_to_le16 (sizeof(struct rx_radiotap_hdr)); radiotap_hdr.hdr.it_present = cpu_to_le32 (RX_RADIOTAP_PRESENT); - /* unknown values */ - radiotap_hdr.flags = 0; - radiotap_hdr.chan_freq = 0; - radiotap_hdr.chan_flags = 0; - radiotap_hdr.antenna = 0; - /* known values */ + if (!(prxpd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK))) + radiotap_hdr.flags |= IEEE80211_RADIOTAP_F_BADFCS; radiotap_hdr.rate = convert_mv_rate_to_radiotap(prxpd->rx_rate); /* XXX must check no carryout */ radiotap_hdr.antsignal = prxpd->snr + prxpd->nf; - radiotap_hdr.rx_flags = 0; - if (!(prxpd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK))) - radiotap_hdr.rx_flags |= IEEE80211_RADIOTAP_F_RX_BADFCS; - //memset(radiotap_hdr.pad, 0x11, IEEE80211_RADIOTAP_HDRLEN - 18); /* chop the rxpd */ skb_pull(skb, sizeof(struct rxpd)); diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 2368b7f825a..d4fdc8b7d7d 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -933,7 +933,6 @@ static int __init init_mac80211_hwsim(void) BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP) | BIT(NL80211_IFTYPE_MESH_POINT); - hw->ampdu_queues = 1; hw->flags = IEEE80211_HW_MFP_CAPABLE; @@ -1041,6 +1040,9 @@ static int __init init_mac80211_hwsim(void) break; } + /* give the regulatory workqueue a chance to run */ + if (regtest) + schedule_timeout_interruptible(1); err = ieee80211_register_hw(hw); if (err < 0) { printk(KERN_DEBUG "mac80211_hwsim: " diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig index cfc5f41aa13..b45d6a4ed1e 100644 --- a/drivers/net/wireless/p54/Kconfig +++ b/drivers/net/wireless/p54/Kconfig @@ -1,9 +1,10 @@ config P54_COMMON tristate "Softmac Prism54 support" - depends on MAC80211 && WLAN_80211 && FW_LOADER && EXPERIMENTAL + depends on MAC80211 && WLAN_80211 && EXPERIMENTAL + select FW_LOADER ---help--- - This is common code for isl38xx based cards. - This module does nothing by itself - the USB/PCI frontends + This is common code for isl38xx/stlc45xx based modules. + This module does nothing by itself - the USB/PCI/SPI front-ends also need to be enabled in order to support any devices. These devices require softmac firmware which can be found at @@ -17,31 +18,6 @@ config P54_USB select CRC32 ---help--- This driver is for USB isl38xx based wireless cards. - These are USB based adapters found in devices such as: - - 3COM 3CRWE254G72 - SMC 2862W-G - Accton 802.11g WN4501 USB - Siemens Gigaset USB - Netgear WG121 - Netgear WG111 - Medion 40900, Roper Europe - Shuttle PN15, Airvast WM168g, IOGear GWU513 - Linksys WUSB54G - Linksys WUSB54G Portable - DLink DWL-G120 Spinnaker - DLink DWL-G122 - Belkin F5D7050 ver 1000 - Cohiba Proto board - SMC 2862W-G version 2 - U.S. Robotics U5 802.11g Adapter - FUJITSU E-5400 USB D1700 - Sagem XG703A - DLink DWL-G120 Cohiba - Spinnaker Proto board - Linksys WUSB54AG - Inventel UR054G - Spinnaker DUT These devices require softmac firmware which can be found at http://prism54.org/ @@ -64,10 +40,15 @@ config P54_PCI config P54_SPI tristate "Prism54 SPI (stlc45xx) support" - depends on P54_COMMON && SPI_MASTER + depends on P54_COMMON && SPI_MASTER && GENERIC_HARDIRQS ---help--- This driver is for stlc4550 or stlc4560 based wireless chips. This driver is experimental, untested and will probably only work on Nokia's N800/N810 Portable Internet Tablet. If you choose to build a module, it'll be called p54spi. + +config P54_LEDS + bool + depends on P54_COMMON && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = P54_COMMON) + default y diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index 0a989834b70..0c1b0577d4e 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -21,9 +21,9 @@ #include <linux/etherdevice.h> #include <net/mac80211.h> -#ifdef CONFIG_MAC80211_LEDS +#ifdef CONFIG_P54_LEDS #include <linux/leds.h> -#endif /* CONFIG_MAC80211_LEDS */ +#endif /* CONFIG_P54_LEDS */ #include "p54.h" #include "p54common.h" @@ -2420,7 +2420,7 @@ static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd, return 0; } -#ifdef CONFIG_MAC80211_LEDS +#ifdef CONFIG_P54_LEDS static void p54_led_brightness_set(struct led_classdev *led_dev, enum led_brightness brightness) { @@ -2508,7 +2508,7 @@ static void p54_unregister_leds(struct ieee80211_hw *dev) if (priv->assoc_led.registered) led_classdev_unregister(&priv->assoc_led.led_dev); } -#endif /* CONFIG_MAC80211_LEDS */ +#endif /* CONFIG_P54_LEDS */ static const struct ieee80211_ops p54_ops = { .tx = p54_tx, @@ -2592,11 +2592,11 @@ int p54_register_common(struct ieee80211_hw *dev, struct device *pdev) return err; } - #ifdef CONFIG_MAC80211_LEDS +#ifdef CONFIG_P54_LEDS err = p54_init_leds(dev); if (err) return err; - #endif /* CONFIG_MAC80211_LEDS */ +#endif /* CONFIG_P54_LEDS */ dev_info(pdev, "is registered as '%s'\n", wiphy_name(dev->wiphy)); return 0; @@ -2610,9 +2610,9 @@ void p54_free_common(struct ieee80211_hw *dev) kfree(priv->output_limit); kfree(priv->curve_data); - #ifdef CONFIG_MAC80211_LEDS +#ifdef CONFIG_P54_LEDS p54_unregister_leds(dev); - #endif /* CONFIG_MAC80211_LEDS */ +#endif /* CONFIG_P54_LEDS */ } EXPORT_SYMBOL_GPL(p54_free_common); diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 24fdfdfee3d..420fff42c0d 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -2425,6 +2425,8 @@ static struct usb_device_id rt73usb_device_table[] = { { USB_DEVICE(0x0df6, 0x9712), USB_DEVICE_DATA(&rt73usb_ops) }, /* Surecom */ { USB_DEVICE(0x0769, 0x31f3), USB_DEVICE_DATA(&rt73usb_ops) }, + /* Tilgin */ + { USB_DEVICE(0x6933, 0x5001), USB_DEVICE_DATA(&rt73usb_ops) }, /* Philips */ { USB_DEVICE(0x0471, 0x200a), USB_DEVICE_DATA(&rt73usb_ops) }, /* Planex */ diff --git a/drivers/net/wireless/wavelan.c b/drivers/net/wireless/wavelan.c index b728541f2fb..3ab3eb95718 100644 --- a/drivers/net/wireless/wavelan.c +++ b/drivers/net/wireless/wavelan.c @@ -735,9 +735,9 @@ if (lp->tx_n_in_use > 0) if (tx_status & AC_SFLD_OK) { int ncollisions; - lp->stats.tx_packets++; + dev->stats.tx_packets++; ncollisions = tx_status & AC_SFLD_MAXCOL; - lp->stats.collisions += ncollisions; + dev->stats.collisions += ncollisions; #ifdef DEBUG_TX_INFO if (ncollisions > 0) printk(KERN_DEBUG @@ -745,9 +745,9 @@ if (lp->tx_n_in_use > 0) dev->name, ncollisions); #endif } else { - lp->stats.tx_errors++; + dev->stats.tx_errors++; if (tx_status & AC_SFLD_S10) { - lp->stats.tx_carrier_errors++; + dev->stats.tx_carrier_errors++; #ifdef DEBUG_TX_FAIL printk(KERN_DEBUG "%s: wv_complete(): tx error: no CS.\n", @@ -755,7 +755,7 @@ if (lp->tx_n_in_use > 0) #endif } if (tx_status & AC_SFLD_S9) { - lp->stats.tx_carrier_errors++; + dev->stats.tx_carrier_errors++; #ifdef DEBUG_TX_FAIL printk(KERN_DEBUG "%s: wv_complete(): tx error: lost CTS.\n", @@ -763,7 +763,7 @@ if (lp->tx_n_in_use > 0) #endif } if (tx_status & AC_SFLD_S8) { - lp->stats.tx_fifo_errors++; + dev->stats.tx_fifo_errors++; #ifdef DEBUG_TX_FAIL printk(KERN_DEBUG "%s: wv_complete(): tx error: slow DMA.\n", @@ -771,7 +771,7 @@ if (lp->tx_n_in_use > 0) #endif } if (tx_status & AC_SFLD_S6) { - lp->stats.tx_heartbeat_errors++; + dev->stats.tx_heartbeat_errors++; #ifdef DEBUG_TX_FAIL printk(KERN_DEBUG "%s: wv_complete(): tx error: heart beat.\n", @@ -779,7 +779,7 @@ if (lp->tx_n_in_use > 0) #endif } if (tx_status & AC_SFLD_S5) { - lp->stats.tx_aborted_errors++; + dev->stats.tx_aborted_errors++; #ifdef DEBUG_TX_FAIL printk(KERN_DEBUG "%s: wv_complete(): tx error: too many collisions.\n", @@ -1346,20 +1346,6 @@ static void wv_init_info(struct net_device * dev) * or wireless extensions */ -/*------------------------------------------------------------------*/ -/* - * Get the current Ethernet statistics. This may be called with the - * card open or closed. - * Used when the user read /proc/net/dev - */ -static en_stats *wavelan_get_stats(struct net_device * dev) -{ -#ifdef DEBUG_IOCTL_TRACE - printk(KERN_DEBUG "%s: <>wavelan_get_stats()\n", dev->name); -#endif - - return &((net_local *)netdev_priv(dev))->stats; -} /*------------------------------------------------------------------*/ /* @@ -2466,7 +2452,7 @@ wv_packet_read(struct net_device * dev, u16 buf_off, int sksize) "%s: wv_packet_read(): could not alloc_skb(%d, GFP_ATOMIC).\n", dev->name, sksize); #endif - lp->stats.rx_dropped++; + dev->stats.rx_dropped++; return; } @@ -2526,8 +2512,8 @@ wv_packet_read(struct net_device * dev, u16 buf_off, int sksize) netif_rx(skb); /* Keep statistics up to date */ - lp->stats.rx_packets++; - lp->stats.rx_bytes += sksize; + dev->stats.rx_packets++; + dev->stats.rx_bytes += sksize; #ifdef DEBUG_RX_TRACE printk(KERN_DEBUG "%s: <-wv_packet_read()\n", dev->name); @@ -2608,7 +2594,7 @@ static void wv_receive(struct net_device * dev) #endif } else { /* If reception was no successful */ - lp->stats.rx_errors++; + dev->stats.rx_errors++; #ifdef DEBUG_RX_INFO printk(KERN_DEBUG @@ -2624,7 +2610,7 @@ static void wv_receive(struct net_device * dev) #endif if ((fd.fd_status & FD_STATUS_S7) != 0) { - lp->stats.rx_length_errors++; + dev->stats.rx_length_errors++; #ifdef DEBUG_RX_FAIL printk(KERN_DEBUG "%s: wv_receive(): frame too short.\n", @@ -2633,7 +2619,7 @@ static void wv_receive(struct net_device * dev) } if ((fd.fd_status & FD_STATUS_S8) != 0) { - lp->stats.rx_over_errors++; + dev->stats.rx_over_errors++; #ifdef DEBUG_RX_FAIL printk(KERN_DEBUG "%s: wv_receive(): rx DMA overrun.\n", @@ -2642,7 +2628,7 @@ static void wv_receive(struct net_device * dev) } if ((fd.fd_status & FD_STATUS_S9) != 0) { - lp->stats.rx_fifo_errors++; + dev->stats.rx_fifo_errors++; #ifdef DEBUG_RX_FAIL printk(KERN_DEBUG "%s: wv_receive(): ran out of resources.\n", @@ -2651,7 +2637,7 @@ static void wv_receive(struct net_device * dev) } if ((fd.fd_status & FD_STATUS_S10) != 0) { - lp->stats.rx_frame_errors++; + dev->stats.rx_frame_errors++; #ifdef DEBUG_RX_FAIL printk(KERN_DEBUG "%s: wv_receive(): alignment error.\n", @@ -2660,7 +2646,7 @@ static void wv_receive(struct net_device * dev) } if ((fd.fd_status & FD_STATUS_S11) != 0) { - lp->stats.rx_crc_errors++; + dev->stats.rx_crc_errors++; #ifdef DEBUG_RX_FAIL printk(KERN_DEBUG "%s: wv_receive(): CRC error.\n", @@ -2826,7 +2812,7 @@ static int wv_packet_write(struct net_device * dev, void *buf, short length) dev->trans_start = jiffies; /* Keep stats up to date. */ - lp->stats.tx_bytes += length; + dev->stats.tx_bytes += length; if (lp->tx_first_in_use == I82586NULL) lp->tx_first_in_use = txblock; @@ -4038,6 +4024,22 @@ static int wavelan_close(struct net_device * dev) return 0; } +static const struct net_device_ops wavelan_netdev_ops = { + .ndo_open = wavelan_open, + .ndo_stop = wavelan_close, + .ndo_start_xmit = wavelan_packet_xmit, + .ndo_set_multicast_list = wavelan_set_multicast_list, + .ndo_tx_timeout = wavelan_watchdog, + .ndo_change_mtu = eth_change_mtu, + .ndo_validate_addr = eth_validate_addr, +#ifdef SET_MAC_ADDRESS + .ndo_set_mac_address = wavelan_set_mac_address +#else + .ndo_set_mac_address = eth_mac_addr, +#endif +}; + + /*------------------------------------------------------------------*/ /* * Probe an I/O address, and if the WaveLAN is there configure the @@ -4130,17 +4132,8 @@ static int __init wavelan_config(struct net_device *dev, unsigned short ioaddr) /* Init spinlock */ spin_lock_init(&lp->spinlock); - dev->open = wavelan_open; - dev->stop = wavelan_close; - dev->hard_start_xmit = wavelan_packet_xmit; - dev->get_stats = wavelan_get_stats; - dev->set_multicast_list = &wavelan_set_multicast_list; - dev->tx_timeout = &wavelan_watchdog; - dev->watchdog_timeo = WATCHDOG_JIFFIES; -#ifdef SET_MAC_ADDRESS - dev->set_mac_address = &wavelan_set_mac_address; -#endif /* SET_MAC_ADDRESS */ - + dev->netdev_ops = &wavelan_netdev_ops; + dev->watchdog_timeo = WATCHDOG_JIFFIES; dev->wireless_handlers = &wavelan_handler_def; lp->wireless_data.spy_data = &lp->spy_data; dev->wireless_data = &lp->wireless_data; diff --git a/drivers/net/wireless/wavelan.p.h b/drivers/net/wireless/wavelan.p.h index 44d31bbf39e..2daa0210d78 100644 --- a/drivers/net/wireless/wavelan.p.h +++ b/drivers/net/wireless/wavelan.p.h @@ -459,11 +459,9 @@ static const char *version = "wavelan.c : v24 (SMP + wireless extensions) 11/12/ /****************************** TYPES ******************************/ /* Shortcuts */ -typedef struct net_device_stats en_stats; typedef struct iw_statistics iw_stats; typedef struct iw_quality iw_qual; -typedef struct iw_freq iw_freq; -typedef struct net_local net_local; +typedef struct iw_freq iw_freq;typedef struct net_local net_local; typedef struct timer_list timer_list; /* Basic types */ @@ -475,15 +473,12 @@ typedef u_char mac_addr[WAVELAN_ADDR_SIZE]; /* Hardware address */ * For each network interface, Linux keeps data in two structures: "device" * keeps the generic data (same format for everybody) and "net_local" keeps * additional specific data. - * Note that some of this specific data is in fact generic (en_stats, for - * example). */ struct net_local { net_local * next; /* linked list of the devices */ struct net_device * dev; /* reverse link */ spinlock_t spinlock; /* Serialize access to the hardware (SMP) */ - en_stats stats; /* Ethernet interface statistics */ int nresets; /* number of hardware resets */ u_char reconfig_82586; /* We need to reconfigure the controller. */ u_char promiscuous; /* promiscuous mode */ @@ -601,8 +596,6 @@ static void static inline void wv_init_info(struct net_device *); /* display startup info */ /* ------------------- IOCTL, STATS & RECONFIG ------------------- */ -static en_stats * - wavelan_get_stats(struct net_device *); /* Give stats /proc/net/dev */ static iw_stats * wavelan_get_wireless_stats(struct net_device *); static void diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index 9f102a6535c..f6732538790 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -1511,7 +1511,7 @@ static int xennet_set_tso(struct net_device *dev, u32 data) static void xennet_set_features(struct net_device *dev) { /* Turn off all GSO bits except ROBUST. */ - dev->features &= (1 << NETIF_F_GSO_SHIFT) - 1; + dev->features &= ~NETIF_F_GSO_MASK; dev->features |= NETIF_F_GSO_ROBUST; xennet_set_sg(dev, 0); |