aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci/msi.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/msi.h')
-rw-r--r--drivers/pci/msi.h110
1 files changed, 2 insertions, 108 deletions
diff --git a/drivers/pci/msi.h b/drivers/pci/msi.h
index 56951c39d3a..f0cca1772f9 100644
--- a/drivers/pci/msi.h
+++ b/drivers/pci/msi.h
@@ -7,84 +7,6 @@
#define MSI_H
/*
- * MSI operation vector. Used by the msi core code (drivers/pci/msi.c)
- * to abstract platform-specific tasks relating to MSI address generation
- * and resource management.
- */
-struct msi_ops {
- /**
- * setup - generate an MSI bus address and data for a given vector
- * @pdev: PCI device context (in)
- * @vector: vector allocated by the msi core (in)
- * @addr_hi: upper 32 bits of PCI bus MSI address (out)
- * @addr_lo: lower 32 bits of PCI bus MSI address (out)
- * @data: MSI data payload (out)
- *
- * Description: The setup op is used to generate a PCI bus addres and
- * data which the msi core will program into the card MSI capability
- * registers. The setup routine is responsible for picking an initial
- * cpu to target the MSI at. The setup routine is responsible for
- * examining pdev to determine the MSI capabilities of the card and
- * generating a suitable address/data. The setup routine is
- * responsible for allocating and tracking any system resources it
- * needs to route the MSI to the cpu it picks, and for associating
- * those resources with the passed in vector.
- *
- * Returns 0 if the MSI address/data was successfully setup.
- **/
-
- int (*setup) (struct pci_dev *pdev, unsigned int vector,
- u32 *addr_hi, u32 *addr_lo, u32 *data);
-
- /**
- * teardown - release resources allocated by setup
- * @vector: vector context for resources (in)
- *
- * Description: The teardown op is used to release any resources
- * that were allocated in the setup routine associated with the passed
- * in vector.
- **/
-
- void (*teardown) (unsigned int vector);
-
- /**
- * target - retarget an MSI at a different cpu
- * @vector: vector context for resources (in)
- * @cpu: new cpu to direct vector at (in)
- * @addr_hi: new value of PCI bus upper 32 bits (in/out)
- * @addr_lo: new value of PCI bus lower 32 bits (in/out)
- *
- * Description: The target op is used to redirect an MSI vector
- * at a different cpu. addr_hi/addr_lo coming in are the existing
- * values that the MSI core has programmed into the card. The
- * target code is responsible for freeing any resources (if any)
- * associated with the old address, and generating a new PCI bus
- * addr_hi/addr_lo that will redirect the vector at the indicated cpu.
- **/
-
- void (*target) (unsigned int vector, unsigned int cpu,
- u32 *addr_hi, u32 *addr_lo);
-};
-
-extern int msi_register(struct msi_ops *ops);
-
-#include <asm/msi.h>
-
-/*
- * Assume the maximum number of hot plug slots supported by the system is about
- * ten. The worstcase is that each of these slots is hot-added with a device,
- * which has two MSI/MSI-X capable functions. To avoid any MSI-X driver, which
- * attempts to request all available vectors, NR_HP_RESERVED_VECTORS is defined
- * as below to ensure at least one message is assigned to each detected MSI/
- * MSI-X device function.
- */
-#define NR_HP_RESERVED_VECTORS 20
-
-extern int vector_irq[NR_VECTORS];
-extern void (*interrupt[NR_IRQS])(void);
-extern int pci_vector_resources(int last, int nr_released);
-
-/*
* MSI-X Address Register
*/
#define PCI_MSIX_FLAGS_QSIZE 0x7FF
@@ -110,8 +32,8 @@ extern int pci_vector_resources(int last, int nr_released);
(1 << ((control & PCI_MSI_FLAGS_QMASK) >> 1))
#define multi_msi_enable(control, num) \
control |= (((num >> 1) << 4) & PCI_MSI_FLAGS_QSIZE);
-#define is_64bit_address(control) (control & PCI_MSI_FLAGS_64BIT)
-#define is_mask_bit_support(control) (control & PCI_MSI_FLAGS_MASKBIT)
+#define is_64bit_address(control) (!!(control & PCI_MSI_FLAGS_64BIT))
+#define is_mask_bit_support(control) (!!(control & PCI_MSI_FLAGS_MASKBIT))
#define msi_enable(control, num) multi_msi_enable(control, num); \
control |= PCI_MSI_FLAGS_ENABLE
@@ -125,32 +47,4 @@ extern int pci_vector_resources(int last, int nr_released);
#define msix_mask(address) (address | PCI_MSIX_FLAGS_BITMASK)
#define msix_is_pending(address) (address & PCI_MSIX_FLAGS_PENDMASK)
-struct msi_desc {
- struct {
- __u8 type : 5; /* {0: unused, 5h:MSI, 11h:MSI-X} */
- __u8 maskbit : 1; /* mask-pending bit supported ? */
- __u8 state : 1; /* {0: free, 1: busy} */
- __u8 reserved: 1; /* reserved */
- __u8 entry_nr; /* specific enabled entry */
- __u8 default_vector; /* default pre-assigned vector */
- __u8 unused; /* formerly unused destination cpu*/
- }msi_attrib;
-
- struct {
- __u16 head;
- __u16 tail;
- }link;
-
- void __iomem *mask_base;
- struct pci_dev *dev;
-
-#ifdef CONFIG_PM
- /* PM save area for MSIX address/data */
-
- u32 address_hi_save;
- u32 address_lo_save;
- u32 data_save;
-#endif
-};
-
#endif /* MSI_H */