aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci')
-rw-r--r--drivers/pci/access.c14
-rw-r--r--drivers/pci/hotplug/acpiphp_glue.c17
-rw-r--r--drivers/pci/hotplug/pci_hotplug_core.c7
-rw-r--r--drivers/pci/hotplug/pciehp.h11
-rw-r--r--drivers/pci/hotplug/pciehp_core.c6
-rw-r--r--drivers/pci/hotplug/pciehp_ctrl.c36
-rw-r--r--drivers/pci/hotplug/pciehp_hpc.c129
-rw-r--r--drivers/pci/hotplug/rpadlpar_sysfs.c8
-rw-r--r--drivers/pci/hotplug/shpchp_core.c4
-rw-r--r--drivers/pci/pci-driver.c2
-rw-r--r--drivers/pci/pci-sysfs.c89
-rw-r--r--drivers/pci/pci.h2
-rw-r--r--drivers/pci/pcie/aspm.c20
-rw-r--r--drivers/pci/quirks.c42
14 files changed, 291 insertions, 96 deletions
diff --git a/drivers/pci/access.c b/drivers/pci/access.c
index ec8f7002b09..39bb96b413e 100644
--- a/drivers/pci/access.c
+++ b/drivers/pci/access.c
@@ -178,8 +178,7 @@ static int pci_vpd_pci22_read(struct pci_dev *dev, int pos, int size,
int ret;
int begin, end, i;
- if (pos < 0 || pos > PCI_VPD_PCI22_SIZE ||
- size > PCI_VPD_PCI22_SIZE - pos)
+ if (pos < 0 || pos > vpd->base.len || size > vpd->base.len - pos)
return -EINVAL;
if (size == 0)
return 0;
@@ -223,8 +222,8 @@ static int pci_vpd_pci22_write(struct pci_dev *dev, int pos, int size,
u32 val;
int ret;
- if (pos < 0 || pos > PCI_VPD_PCI22_SIZE || pos & 3 ||
- size > PCI_VPD_PCI22_SIZE - pos || size < 4)
+ if (pos < 0 || pos > vpd->base.len || pos & 3 ||
+ size > vpd->base.len - pos || size < 4)
return -EINVAL;
val = (u8) *buf++;
@@ -255,11 +254,6 @@ out:
return 4;
}
-static int pci_vpd_pci22_get_size(struct pci_dev *dev)
-{
- return PCI_VPD_PCI22_SIZE;
-}
-
static void pci_vpd_pci22_release(struct pci_dev *dev)
{
kfree(container_of(dev->vpd, struct pci_vpd_pci22, base));
@@ -268,7 +262,6 @@ static void pci_vpd_pci22_release(struct pci_dev *dev)
static struct pci_vpd_ops pci_vpd_pci22_ops = {
.read = pci_vpd_pci22_read,
.write = pci_vpd_pci22_write,
- .get_size = pci_vpd_pci22_get_size,
.release = pci_vpd_pci22_release,
};
@@ -284,6 +277,7 @@ int pci_vpd_pci22_init(struct pci_dev *dev)
if (!vpd)
return -ENOMEM;
+ vpd->base.len = PCI_VPD_PCI22_SIZE;
vpd->base.ops = &pci_vpd_pci22_ops;
spin_lock_init(&vpd->lock);
vpd->cap = cap;
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 648596d469f..91156f85a92 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -700,9 +700,10 @@ cleanup_p2p_bridge(acpi_handle handle, u32 lvl, void *context, void **rv)
acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
cleanup_p2p_bridge, NULL, NULL);
- if (!(bridge = acpiphp_handle_to_bridge(handle)))
- return AE_OK;
- cleanup_bridge(bridge);
+ bridge = acpiphp_handle_to_bridge(handle);
+ if (bridge)
+ cleanup_bridge(bridge);
+
return AE_OK;
}
@@ -715,9 +716,19 @@ static void remove_bridge(acpi_handle handle)
acpi_walk_namespace(ACPI_TYPE_DEVICE, handle,
(u32)1, cleanup_p2p_bridge, NULL, NULL);
+ /*
+ * On root bridges with hotplug slots directly underneath (ie,
+ * no p2p bridge inbetween), we call cleanup_bridge().
+ *
+ * The else clause cleans up root bridges that either had no
+ * hotplug slots at all, or had a p2p bridge underneath.
+ */
bridge = acpiphp_handle_to_bridge(handle);
if (bridge)
cleanup_bridge(bridge);
+ else
+ acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
+ handle_hotplug_event_bridge);
}
static struct pci_dev * get_apic_pci_info(acpi_handle handle)
diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c
index 925ba16355c..a11021e8ce3 100644
--- a/drivers/pci/hotplug/pci_hotplug_core.c
+++ b/drivers/pci/hotplug/pci_hotplug_core.c
@@ -619,6 +619,7 @@ static struct hotplug_slot *get_slot_from_name (const char *name)
int pci_hp_register (struct hotplug_slot *slot)
{
int result;
+ struct hotplug_slot *tmp;
if (slot == NULL)
return -ENODEV;
@@ -630,7 +631,11 @@ int pci_hp_register (struct hotplug_slot *slot)
return -EINVAL;
}
- /* this can fail if we have already registered a slot with the same name */
+ /* Check if we have already registered a slot with the same name. */
+ tmp = get_slot_from_name(slot->name);
+ if (tmp)
+ return -EEXIST;
+
slot->kobj.kset = pci_hotplug_slots_kset;
result = kobject_init_and_add(&slot->kobj, &hotplug_slot_ktype, NULL,
"%s", slot->name);
diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index 8264a768043..79c9ddaad3f 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -97,6 +97,7 @@ struct controller {
u8 cap_base;
struct timer_list poll_timer;
volatile int cmd_busy;
+ unsigned int no_cmd_complete:1;
};
#define INT_BUTTON_IGNORE 0
@@ -135,6 +136,7 @@ struct controller {
#define PWR_LED_PRSN 0x00000010
#define HP_SUPR_RM_SUP 0x00000020
#define EMI_PRSN 0x00020000
+#define NO_CMD_CMPL_SUP 0x00040000
#define ATTN_BUTTN(ctrl) ((ctrl)->slot_cap & ATTN_BUTTN_PRSN)
#define POWER_CTRL(ctrl) ((ctrl)->slot_cap & PWR_CTRL_PRSN)
@@ -143,13 +145,14 @@ struct controller {
#define PWR_LED(ctrl) ((ctrl)->slot_cap & PWR_LED_PRSN)
#define HP_SUPR_RM(ctrl) ((ctrl)->slot_cap & HP_SUPR_RM_SUP)
#define EMI(ctrl) ((ctrl)->slot_cap & EMI_PRSN)
+#define NO_CMD_CMPL(ctrl) ((ctrl)->slot_cap & NO_CMD_CMPL_SUP)
extern int pciehp_sysfs_enable_slot(struct slot *slot);
extern int pciehp_sysfs_disable_slot(struct slot *slot);
-extern u8 pciehp_handle_attention_button(u8 hp_slot, struct controller *ctrl);
-extern u8 pciehp_handle_switch_change(u8 hp_slot, struct controller *ctrl);
-extern u8 pciehp_handle_presence_change(u8 hp_slot, struct controller *ctrl);
-extern u8 pciehp_handle_power_fault(u8 hp_slot, struct controller *ctrl);
+extern u8 pciehp_handle_attention_button(struct slot *p_slot);
+ extern u8 pciehp_handle_switch_change(struct slot *p_slot);
+extern u8 pciehp_handle_presence_change(struct slot *p_slot);
+extern u8 pciehp_handle_power_fault(struct slot *p_slot);
extern int pciehp_configure_device(struct slot *p_slot);
extern int pciehp_unconfigure_device(struct slot *p_slot);
extern void pciehp_queue_pushbutton_work(struct work_struct *work);
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 43d8ddb2d67..48a2ed37891 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -254,7 +254,11 @@ static int init_slots(struct controller *ctrl)
slot->hp_slot, slot->number, ctrl->slot_device_offset);
retval = pci_hp_register(hotplug_slot);
if (retval) {
- err ("pci_hp_register failed with error %d\n", retval);
+ err("pci_hp_register failed with error %d\n", retval);
+ if (retval == -EEXIST)
+ err("Failed to register slot because of name "
+ "collision. Try \'pciehp_slot_with_bus\' "
+ "module option.\n");
goto error_info;
}
/* create additional sysfs entries */
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index 0a7aa628e95..96a5d55a498 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -55,16 +55,13 @@ static int queue_interrupt_event(struct slot *p_slot, u32 event_type)
return 0;
}
-u8 pciehp_handle_attention_button(u8 hp_slot, struct controller *ctrl)
+u8 pciehp_handle_attention_button(struct slot *p_slot)
{
- struct slot *p_slot;
u32 event_type;
/* Attention Button Change */
dbg("pciehp: Attention button interrupt received.\n");
- p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
-
/*
* Button pressed - See if need to TAKE ACTION!!!
*/
@@ -76,18 +73,15 @@ u8 pciehp_handle_attention_button(u8 hp_slot, struct controller *ctrl)
return 0;
}
-u8 pciehp_handle_switch_change(u8 hp_slot, struct controller *ctrl)
+u8 pciehp_handle_switch_change(struct slot *p_slot)
{
- struct slot *p_slot;
u8 getstatus;
u32 event_type;
/* Switch Change */
dbg("pciehp: Switch interrupt received.\n");
- p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
-
if (getstatus) {
/*
* Switch opened
@@ -107,17 +101,14 @@ u8 pciehp_handle_switch_change(u8 hp_slot, struct controller *ctrl)
return 1;
}
-u8 pciehp_handle_presence_change(u8 hp_slot, struct controller *ctrl)
+u8 pciehp_handle_presence_change(struct slot *p_slot)
{
- struct slot *p_slot;
u32 event_type;
u8 presence_save;
/* Presence Change */
dbg("pciehp: Presence/Notify input change.\n");
- p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
-
/* Switch is open, assume a presence change
* Save the presence state
*/
@@ -141,16 +132,13 @@ u8 pciehp_handle_presence_change(u8 hp_slot, struct controller *ctrl)
return 1;
}
-u8 pciehp_handle_power_fault(u8 hp_slot, struct controller *ctrl)
+u8 pciehp_handle_power_fault(struct slot *p_slot)
{
- struct slot *p_slot;
u32 event_type;
/* power fault */
dbg("pciehp: Power fault interrupt received.\n");
- p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
-
if ( !(p_slot->hpc_ops->query_power_fault(p_slot))) {
/*
* power fault Cleared
@@ -163,7 +151,7 @@ u8 pciehp_handle_power_fault(u8 hp_slot, struct controller *ctrl)
*/
info("Power fault on Slot(%s)\n", p_slot->name);
event_type = INT_POWER_FAULT;
- info("power fault bit %x set\n", hp_slot);
+ info("power fault bit %x set\n", 0);
}
queue_interrupt_event(p_slot, event_type);
@@ -186,6 +174,13 @@ static void set_slot_off(struct controller *ctrl, struct slot * pslot)
}
}
+ /*
+ * After turning power off, we must wait for at least 1 second
+ * before taking any action that relies on power having been
+ * removed from the slot/adapter.
+ */
+ msleep(1000);
+
if (PWR_LED(ctrl))
pslot->hpc_ops->green_led_off(pslot);
@@ -289,6 +284,13 @@ static int remove_board(struct slot *p_slot)
}
}
+ /*
+ * After turning power off, we must wait for at least 1 second
+ * before taking any action that relies on power having been
+ * removed from the slot/adapter.
+ */
+ msleep(1000);
+
if (PWR_LED(ctrl))
/* turn off Green LED */
p_slot->hpc_ops->green_led_off(p_slot);
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 891f81a0400..79f10496316 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -247,14 +247,38 @@ static inline void pciehp_free_irq(struct controller *ctrl)
free_irq(ctrl->pci_dev->irq, ctrl);
}
-static inline int pcie_wait_cmd(struct controller *ctrl)
+static inline int pcie_poll_cmd(struct controller *ctrl)
+{
+ u16 slot_status;
+ int timeout = 1000;
+
+ if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status))
+ if (slot_status & CMD_COMPLETED)
+ goto completed;
+ for (timeout = 1000; timeout > 0; timeout -= 100) {
+ msleep(100);
+ if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status))
+ if (slot_status & CMD_COMPLETED)
+ goto completed;
+ }
+ return 0; /* timeout */
+
+completed:
+ pciehp_writew(ctrl, SLOTSTATUS, CMD_COMPLETED);
+ return timeout;
+}
+
+static inline int pcie_wait_cmd(struct controller *ctrl, int poll)
{
int retval = 0;
unsigned int msecs = pciehp_poll_mode ? 2500 : 1000;
unsigned long timeout = msecs_to_jiffies(msecs);
int rc;
- rc = wait_event_interruptible_timeout(ctrl->queue,
+ if (poll)
+ rc = pcie_poll_cmd(ctrl);
+ else
+ rc = wait_event_interruptible_timeout(ctrl->queue,
!ctrl->cmd_busy, timeout);
if (!rc)
dbg("Command not completed in 1000 msec\n");
@@ -286,12 +310,28 @@ static int pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask)
goto out;
}
- if ((slot_status & CMD_COMPLETED) == CMD_COMPLETED ) {
- /* After 1 sec and CMD_COMPLETED still not set, just
- proceed forward to issue the next command according
- to spec. Just print out the error message */
- dbg("%s: CMD_COMPLETED not clear after 1 sec.\n",
- __func__);
+ if (slot_status & CMD_COMPLETED) {
+ if (!ctrl->no_cmd_complete) {
+ /*
+ * After 1 sec and CMD_COMPLETED still not set, just
+ * proceed forward to issue the next command according
+ * to spec. Just print out the error message.
+ */
+ dbg("%s: CMD_COMPLETED not clear after 1 sec.\n",
+ __func__);
+ } else if (!NO_CMD_CMPL(ctrl)) {
+ /*
+ * This controller semms to notify of command completed
+ * event even though it supports none of power
+ * controller, attention led, power led and EMI.
+ */
+ dbg("%s: Unexpected CMD_COMPLETED. Need to wait for "
+ "command completed event.\n", __func__);
+ ctrl->no_cmd_complete = 0;
+ } else {
+ dbg("%s: Unexpected CMD_COMPLETED. Maybe the "
+ "controller is broken.\n", __func__);
+ }
}
retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
@@ -315,8 +355,18 @@ static int pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask)
/*
* Wait for command completion.
*/
- if (!retval)
- retval = pcie_wait_cmd(ctrl);
+ if (!retval && !ctrl->no_cmd_complete) {
+ int poll = 0;
+ /*
+ * if hotplug interrupt is not enabled or command
+ * completed interrupt is not enabled, we need to poll
+ * command completed event.
+ */
+ if (!(slot_ctrl & HP_INTR_ENABLE) ||
+ !(slot_ctrl & CMD_CMPL_INTR_ENABLE))
+ poll = 1;
+ retval = pcie_wait_cmd(ctrl, poll);
+ }
out:
mutex_unlock(&ctrl->ctrl_lock);
return retval;
@@ -704,13 +754,6 @@ static int hpc_power_off_slot(struct slot * slot)
}
dbg("%s: SLOTCTRL %x write cmd %x\n",
__func__, ctrl->cap_base + SLOTCTRL, slot_cmd);
-
- /*
- * After turning power off, we must wait for at least 1 second
- * before taking any action that relies on power having been
- * removed from the slot/adapter.
- */
- msleep(1000);
out:
if (changed)
pcie_unmask_bad_dllp(ctrl);
@@ -722,6 +765,7 @@ static irqreturn_t pcie_isr(int irq, void *dev_id)
{
struct controller *ctrl = (struct controller *)dev_id;
u16 detected, intr_loc;
+ struct slot *p_slot;
/*
* In order to guarantee that all interrupt events are
@@ -756,21 +800,38 @@ static irqreturn_t pcie_isr(int irq, void *dev_id)
wake_up_interruptible(&ctrl->queue);
}
+ if (!(intr_loc & ~CMD_COMPLETED))
+ return IRQ_HANDLED;
+
+ /*
+ * Return without handling events if this handler routine is
+ * called before controller initialization is done. This may
+ * happen if hotplug event or another interrupt that shares
+ * the IRQ with pciehp arrives before slot initialization is
+ * done after interrupt handler is registered.
+ *
+ * FIXME - Need more structural fixes. We need to be ready to
+ * handle the event before installing interrupt handler.
+ */
+ p_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
+ if (!p_slot || !p_slot->hpc_ops)
+ return IRQ_HANDLED;
+
/* Check MRL Sensor Changed */
if (intr_loc & MRL_SENS_CHANGED)
- pciehp_handle_switch_change(0, ctrl);
+ pciehp_handle_switch_change(p_slot);
/* Check Attention Button Pressed */
if (intr_loc & ATTN_BUTTN_PRESSED)
- pciehp_handle_attention_button(0, ctrl);
+ pciehp_handle_attention_button(p_slot);
/* Check Presence Detect Changed */
if (intr_loc & PRSN_DETECT_CHANGED)
- pciehp_handle_presence_change(0, ctrl);
+ pciehp_handle_presence_change(p_slot);
/* Check Power Fault Detected */
if (intr_loc & PWR_FAULT_DETECTED)
- pciehp_handle_power_fault(0, ctrl);
+ pciehp_handle_power_fault(p_slot);
return IRQ_HANDLED;
}
@@ -1028,6 +1089,12 @@ static int pciehp_acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev)
static int pcie_init_hardware_part1(struct controller *ctrl,
struct pcie_device *dev)
{
+ /* Clear all remaining event bits in Slot Status register */
+ if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f)) {
+ err("%s: Cannot write to SLOTSTATUS register\n", __func__);
+ return -1;
+ }
+
/* Mask Hot-plug Interrupt Enable */
if (pcie_write_cmd(ctrl, 0, HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE)) {
err("%s: Cannot mask hotplug interrupt enable\n", __func__);
@@ -1040,16 +1107,6 @@ int pcie_init_hardware_part2(struct controller *ctrl, struct pcie_device *dev)
{
u16 cmd, mask;
- /*
- * We need to clear all events before enabling hotplug interrupt
- * notification mechanism in order for hotplug controler to
- * generate interrupts.
- */
- if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f)) {
- err("%s: Cannot write to SLOTSTATUS register\n", __FUNCTION__);
- return -1;
- }
-
cmd = PRSN_DETECT_ENABLE;
if (ATTN_BUTTN(ctrl))
cmd |= ATTN_BUTTN_ENABLE;
@@ -1116,6 +1173,7 @@ static inline void dbg_ctrl(struct controller *ctrl)
dbg(" Power Indicator : %3s\n", PWR_LED(ctrl) ? "yes" : "no");
dbg(" Hot-Plug Surprise : %3s\n", HP_SUPR_RM(ctrl) ? "yes" : "no");
dbg(" EMI Present : %3s\n", EMI(ctrl) ? "yes" : "no");
+ dbg(" Comamnd Completed : %3s\n", NO_CMD_CMPL(ctrl)? "no" : "yes");
pciehp_readw(ctrl, SLOTSTATUS, &reg16);
dbg("Slot Status : 0x%04x\n", reg16);
pciehp_readw(ctrl, SLOTSTATUS, &reg16);
@@ -1147,6 +1205,15 @@ int pcie_init(struct controller *ctrl, struct pcie_device *dev)
mutex_init(&ctrl->ctrl_lock);
init_waitqueue_head(&ctrl->queue);
dbg_ctrl(ctrl);
+ /*
+ * Controller doesn't notify of command completion if the "No
+ * Command Completed Support" bit is set in Slot Capability
+ * register or the controller supports none of power
+ * controller, attention led, power led and EMI.
+ */
+ if (NO_CMD_CMPL(ctrl) ||
+ !(POWER_CTRL(ctrl) | ATTN_LED(ctrl) | PWR_LED(ctrl) | EMI(ctrl)))
+ ctrl->no_cmd_complete = 1;
info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n",
pdev->vendor, pdev->device,
diff --git a/drivers/pci/hotplug/rpadlpar_sysfs.c b/drivers/pci/hotplug/rpadlpar_sysfs.c
index e32148a8fa1..779c5db71be 100644
--- a/drivers/pci/hotplug/rpadlpar_sysfs.c
+++ b/drivers/pci/hotplug/rpadlpar_sysfs.c
@@ -18,8 +18,12 @@
#include "rpadlpar.h"
#define DLPAR_KOBJ_NAME "control"
-#define ADD_SLOT_ATTR_NAME "add_slot"
-#define REMOVE_SLOT_ATTR_NAME "remove_slot"
+
+/* Those two have no quotes because they are passed to __ATTR() which
+ * stringifies the argument (yuck !)
+ */
+#define ADD_SLOT_ATTR_NAME add_slot
+#define REMOVE_SLOT_ATTR_NAME remove_slot
#define MAX_DRC_NAME_LEN 64
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index 1648076600f..97848654652 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -162,6 +162,10 @@ static int init_slots(struct controller *ctrl)
retval = pci_hp_register(slot->hotplug_slot);
if (retval) {
err("pci_hp_register failed with error %d\n", retval);
+ if (retval == -EEXIST)
+ err("Failed to register slot because of name "
+ "collision. Try \'shpchp_slot_with_bus\' "
+ "module option.\n");
goto error_info;
}
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 72cf61ed8f9..e1637bd82b8 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -181,7 +181,7 @@ static int pci_call_probe(struct pci_driver *drv, struct pci_dev *dev,
any need to change it. */
struct mempolicy *oldpol;
cpumask_t oldmask = current->cpus_allowed;
- int node = pcibus_to_node(dev->bus);
+ int node = dev_to_node(&dev->dev);
if (node >= 0) {
node_to_cpumask_ptr(nodecpumask, node);
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 271d41cc05a..9c718583a23 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -489,13 +489,13 @@ pci_mmap_legacy_mem(struct kobject *kobj, struct bin_attribute *attr,
* @kobj: kobject for mapping
* @attr: struct bin_attribute for the file being mapped
* @vma: struct vm_area_struct passed into the mmap
+ * @write_combine: 1 for write_combine mapping
*
* Use the regular PCI mapping routines to map a PCI resource into userspace.
- * FIXME: write combining? maybe automatic for prefetchable regions?
*/
static int
pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr,
- struct vm_area_struct *vma)
+ struct vm_area_struct *vma, int write_combine)
{
struct pci_dev *pdev = to_pci_dev(container_of(kobj,
struct device, kobj));
@@ -518,7 +518,21 @@ pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr,
vma->vm_pgoff += start >> PAGE_SHIFT;
mmap_type = res->flags & IORESOURCE_MEM ? pci_mmap_mem : pci_mmap_io;
- return pci_mmap_page_range(pdev, vma, mmap_type, 0);
+ return pci_mmap_page_range(pdev, vma, mmap_type, write_combine);
+}
+
+static int
+pci_mmap_resource_uc(struct kobject *kobj, struct bin_attribute *attr,
+ struct vm_area_struct *vma)
+{
+ return pci_mmap_resource(kobj, attr, vma, 0);
+}
+
+static int
+pci_mmap_resource_wc(struct kobject *kobj, struct bin_attribute *attr,
+ struct vm_area_struct *vma)
+{
+ return pci_mmap_resource(kobj, attr, vma, 1);
}
/**
@@ -541,9 +555,46 @@ pci_remove_resource_files(struct pci_dev *pdev)
sysfs_remove_bin_file(&pdev->dev.kobj, res_attr);
kfree(res_attr);
}
+
+ res_attr = pdev->res_attr_wc[i];
+ if (res_attr) {
+ sysfs_remove_bin_file(&pdev->dev.kobj, res_attr);
+ kfree(res_attr);
+ }
}
}
+static int pci_create_attr(struct pci_dev *pdev, int num, int write_combine)
+{
+ /* allocate attribute structure, piggyback attribute name */
+ int name_len = write_combine ? 13 : 10;
+ struct bin_attribute *res_attr;
+ int retval;
+
+ res_attr = kzalloc(sizeof(*res_attr) + name_len, GFP_ATOMIC);
+ if (res_attr) {
+ char *res_attr_name = (char *)(res_attr + 1);
+
+ if (write_combine) {
+ pdev->res_attr_wc[num] = res_attr;
+ sprintf(res_attr_name, "resource%d_wc", num);
+ res_attr->mmap = pci_mmap_resource_wc;
+ } else {
+ pdev->res_attr[num] = res_attr;
+ sprintf(res_attr_name, "resource%d", num);
+ res_attr->mmap = pci_mmap_resource_uc;
+ }
+ res_attr->attr.name = res_attr_name;
+ res_attr->attr.mode = S_IRUSR | S_IWUSR;
+ res_attr->size = pci_resource_len(pdev, num);
+ res_attr->private = &pdev->resource[num];
+ retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr);
+ } else
+ retval = -ENOMEM;
+
+ return retval;
+}
+
/**
* pci_create_resource_files - create resource files in sysfs for @dev
* @dev: dev in question
@@ -557,31 +608,19 @@ static int pci_create_resource_files(struct pci_dev *pdev)
/* Expose the PCI resources from this device as files */
for (i = 0; i < PCI_ROM_RESOURCE; i++) {
- struct bin_attribute *res_attr;
/* skip empty resources */
if (!pci_resource_len(pdev, i))
continue;
- /* allocate attribute structure, piggyback attribute name */
- res_attr = kzalloc(sizeof(*res_attr) + 10, GFP_ATOMIC);
- if (res_attr) {
- char *res_attr_name = (char *)(res_attr + 1);
-
- pdev->res_attr[i] = res_attr;
- sprintf(res_attr_name, "resource%d", i);
- res_attr->attr.name = res_attr_name;
- res_attr->attr.mode = S_IRUSR | S_IWUSR;
- res_attr->size = pci_resource_len(pdev, i);
- res_attr->mmap = pci_mmap_resource;
- res_attr->private = &pdev->resource[i];
- retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr);
- if (retval) {
- pci_remove_resource_files(pdev);
- return retval;
- }
- } else {
- return -ENOMEM;
+ retval = pci_create_attr(pdev, i, 0);
+ /* for prefetchable resources, create a WC mappable file */
+ if (!retval && pdev->resource[i].flags & IORESOURCE_PREFETCH)
+ retval = pci_create_attr(pdev, i, 1);
+
+ if (retval) {
+ pci_remove_resource_files(pdev);
+ return retval;
}
}
return 0;
@@ -697,9 +736,9 @@ int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev)
attr = kzalloc(sizeof(*attr), GFP_ATOMIC);
if (attr) {
pdev->vpd->attr = attr;
- attr->size = pdev->vpd->ops->get_size(pdev);
+ attr->size = pdev->vpd->len;
attr->attr.name = "vpd";
- attr->attr.mode = S_IRUGO | S_IWUSR;
+ attr->attr.mode = S_IRUSR | S_IWUSR;
attr->read = pci_read_vpd;
attr->write = pci_write_vpd;
retval = sysfs_create_bin_file(&pdev->dev.kobj, attr);
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 0a497c1b422..00408c97e5f 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -21,11 +21,11 @@ extern int pci_user_write_config_dword(struct pci_dev *dev, int where, u32 val);
struct pci_vpd_ops {
int (*read)(struct pci_dev *dev, int pos, int size, char *buf);
int (*write)(struct pci_dev *dev, int pos, int size, const char *buf);
- int (*get_size)(struct pci_dev *dev);
void (*release)(struct pci_dev *dev);
};
struct pci_vpd {
+ unsigned int len;
struct pci_vpd_ops *ops;
struct bin_attribute *attr; /* descriptor for sysfs VPD entry */
};
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 61fedb2448b..f82495583e6 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -506,6 +506,23 @@ static void free_link_state(struct pci_dev *pdev)
pdev->link_state = NULL;
}
+static int pcie_aspm_sanity_check(struct pci_dev *pdev)
+{
+ struct pci_dev *child_dev;
+ int child_pos;
+
+ /*
+ * Some functions in a slot might not all be PCIE functions, very
+ * strange. Disable ASPM for the whole slot
+ */
+ list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
+ child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
+ if (!child_pos)
+ return -EINVAL;
+ }
+ return 0;
+}
+
/*
* pcie_aspm_init_link_state: Initiate PCI express link state.
* It is called after the pcie and its children devices are scaned.
@@ -526,6 +543,9 @@ void pcie_aspm_init_link_state(struct pci_dev *pdev)
if (list_empty(&pdev->subordinate->devices))
goto out;
+ if (pcie_aspm_sanity_check(pdev))
+ goto out;
+
mutex_lock(&aspm_lock);
link_state = kzalloc(sizeof(*link_state), GFP_KERNEL);
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index dabb563f51d..a3497dc6ebc 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1670,6 +1670,48 @@ static void __devinit quirk_via_cx700_pci_parking_caching(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching);
+/*
+ * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the
+ * VPD end tag will hang the device. This problem was initially
+ * observed when a vpd entry was created in sysfs
+ * ('/sys/bus/pci/devices/<id>/vpd'). A read to this sysfs entry
+ * will dump 32k of data. Reading a full 32k will cause an access
+ * beyond the VPD end tag causing the device to hang. Once the device
+ * is hung, the bnx2 driver will not be able to reset the device.
+ * We believe that it is legal to read beyond the end tag and
+ * therefore the solution is to limit the read/write length.
+ */
+static void __devinit quirk_brcm_570x_limit_vpd(struct pci_dev *dev)
+{
+ /* Only disable the VPD capability for 5706, 5708, and 5709 rev. A */
+ if ((dev->device == PCI_DEVICE_ID_NX2_5706) ||
+ (dev->device == PCI_DEVICE_ID_NX2_5708) ||
+ ((dev->device == PCI_DEVICE_ID_NX2_5709) &&
+ (dev->revision & 0xf0) == 0x0)) {
+ if (dev->vpd)
+ dev->vpd->len = 0x80;
+ }
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5706,
+ quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5706S,
+ quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5708,
+ quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5708S,
+ quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5709,
+ quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5709S,
+ quirk_brcm_570x_limit_vpd);
+
#ifdef CONFIG_PCI_MSI
/* Some chipsets do not support MSI. We cannot easily rely on setting
* PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually