diff options
Diffstat (limited to 'drivers/sbus/char')
| -rw-r--r-- | drivers/sbus/char/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/sbus/char/Makefile | 1 | ||||
| -rw-r--r-- | drivers/sbus/char/aurora.c | 2364 | ||||
| -rw-r--r-- | drivers/sbus/char/aurora.h | 276 | ||||
| -rw-r--r-- | drivers/sbus/char/bbc_i2c.c | 17 | ||||
| -rw-r--r-- | drivers/sbus/char/cd180.h | 240 | ||||
| -rw-r--r-- | drivers/sbus/char/uctrl.c | 8 |
7 files changed, 16 insertions, 2897 deletions
diff --git a/drivers/sbus/char/Kconfig b/drivers/sbus/char/Kconfig index 3a8152906bf..35a73168333 100644 --- a/drivers/sbus/char/Kconfig +++ b/drivers/sbus/char/Kconfig @@ -46,13 +46,6 @@ config SUN_VIDEOPIX based on the Phillips SAA9051, can handle NTSC and PAL/SECAM and SVIDEO signals. -config SUN_AURORA - tristate "Aurora Multiboard 1600se (EXPERIMENTAL)" - depends on EXPERIMENTAL && BROKEN - help - The Aurora Multiboard is a multi-port high-speed serial controller. - If you have one of these, say Y. - config TADPOLE_TS102_UCTRL tristate "Tadpole TS102 Microcontroller support (EXPERIMENTAL)" depends on EXPERIMENTAL && SPARC32 diff --git a/drivers/sbus/char/Makefile b/drivers/sbus/char/Makefile index 3a5ea1dc789..7ab060e9a5f 100644 --- a/drivers/sbus/char/Makefile +++ b/drivers/sbus/char/Makefile @@ -19,7 +19,6 @@ obj-$(CONFIG_SUN_OPENPROMIO) += openprom.o obj-$(CONFIG_SUN_MOSTEK_RTC) += rtc.o obj-$(CONFIG_SUN_BPP) += bpp.o obj-$(CONFIG_SUN_VIDEOPIX) += vfc.o -obj-$(CONFIG_SUN_AURORA) += aurora.o obj-$(CONFIG_TADPOLE_TS102_UCTRL) += uctrl.o obj-$(CONFIG_SUN_JSFLASH) += jsflash.o obj-$(CONFIG_BBC_I2C) += bbc.o diff --git a/drivers/sbus/char/aurora.c b/drivers/sbus/char/aurora.c deleted file mode 100644 index a54b4ac6756..00000000000 --- a/drivers/sbus/char/aurora.c +++ /dev/null @@ -1,2364 +0,0 @@ -/* $Id: aurora.c,v 1.19 2002/01/08 16:00:16 davem Exp $ - * linux/drivers/sbus/char/aurora.c -- Aurora multiport driver - * - * Copyright (c) 1999 by Oliver Aldulea (oli at bv dot ro) - * - * This code is based on the RISCom/8 multiport serial driver written - * by Dmitry Gorodchanin (pgmdsg@ibi.com), based on the Linux serial - * driver, written by Linus Torvalds, Theodore T'so and others. - * The Aurora multiport programming info was obtained mainly from the - * Cirrus Logic CD180 documentation (available on the web), and by - * doing heavy tests on the board. Many thanks to Eddie C. Dost for the - * help on the sbus interface. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Revision 1.0 - * - * This is the first public release. - * - * Most of the information you need is in the aurora.h file. Please - * read that file before reading this one. - * - * Several parts of the code do not have comments yet. - * - * n.b. The board can support 115.2 bit rates, but only on a few - * ports. The total badwidth of one chip (ports 0-7 or 8-15) is equal - * to OSC_FREQ div 16. In case of my board, each chip can take 6 - * channels of 115.2 kbaud. This information is not well-tested. - * - * Fixed to use tty_get_baud_rate(). - * Theodore Ts'o <tytso@mit.edu>, 2001-Oct-12 - */ - -#include <linux/module.h> - -#include <linux/errno.h> -#include <linux/sched.h> -#ifdef AURORA_INT_DEBUG -#include <linux/timer.h> -#endif -#include <linux/interrupt.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/major.h> -#include <linux/string.h> -#include <linux/fcntl.h> -#include <linux/mm.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/bitops.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/oplib.h> -#include <asm/system.h> -#include <asm/kdebug.h> -#include <asm/sbus.h> -#include <asm/uaccess.h> - -#include "aurora.h" -#include "cd180.h" - -unsigned char irqs[4] = { - 0, 0, 0, 0 -}; - -#ifdef AURORA_INT_DEBUG -int irqhit=0; -#endif - -static struct tty_driver *aurora_driver; -static struct Aurora_board aurora_board[AURORA_NBOARD] = { - {0,}, -}; - -static struct Aurora_port aurora_port[AURORA_TNPORTS] = { - { 0, }, -}; - -/* no longer used. static struct Aurora_board * IRQ_to_board[16] = { NULL, } ;*/ -static unsigned char * tmp_buf = NULL; - -DECLARE_TASK_QUEUE(tq_aurora); - -static inline int aurora_paranoia_check(struct Aurora_port const * port, - char *name, const char *routine) -{ -#ifdef AURORA_PARANOIA_CHECK - static const char *badmagic = - KERN_DEBUG "aurora: Warning: bad aurora port magic number for device %s in %s\n"; - static const char *badinfo = - KERN_DEBUG "aurora: Warning: null aurora port for device %s in %s\n"; - - if (!port) { - printk(badinfo, name, routine); - return 1; - } - if (port->magic != AURORA_MAGIC) { - printk(badmagic, name, routine); - return 1; - } -#endif - return 0; -} - -/* - * - * Service functions for aurora driver. - * - */ - -/* Get board number from pointer */ -static inline int board_No (struct Aurora_board const * bp) -{ - return bp - aurora_board; -} - -/* Get port number from pointer */ -static inline int port_No (struct Aurora_port const * port) -{ - return AURORA_PORT(port - aurora_port); -} - -/* Get pointer to board from pointer to port */ -static inline struct Aurora_board * port_Board(struct Aurora_port const * port) -{ - return &aurora_board[AURORA_BOARD(port - aurora_port)]; -} - -/* Wait for Channel Command Register ready */ -static inline void aurora_wait_CCR(struct aurora_reg128 * r) -{ - unsigned long delay; - -#ifdef AURORA_DEBUG -printk("aurora_wait_CCR\n"); -#endif - /* FIXME: need something more descriptive than 100000 :) */ - for (delay = 100000; delay; delay--) - if (!sbus_readb(&r->r[CD180_CCR])) - return; - printk(KERN_DEBUG "aurora: Timeout waiting for CCR.\n"); -} - -/* - * aurora probe functions. - */ - -/* Must be called with enabled interrupts */ -static inline void aurora_long_delay(unsigned long delay) -{ - unsigned long i; - -#ifdef AURORA_DEBUG - printk("aurora_long_delay: start\n"); -#endif - for (i = jiffies + delay; time_before(jiffies, i); ) ; -#ifdef AURORA_DEBUG - printk("aurora_long_delay: end\n"); -#endif -} - -/* Reset and setup CD180 chip */ -static int aurora_init_CD180(struct Aurora_board * bp, int chip) -{ - unsigned long flags; - int id; - -#ifdef AURORA_DEBUG - printk("aurora_init_CD180: start %d:%d\n", - board_No(bp), chip); -#endif - save_flags(flags); cli(); - sbus_writeb(0, &bp->r[chip]->r[CD180_CAR]); - sbus_writeb(0, &bp->r[chip]->r[CD180_GSVR]); - - /* Wait for CCR ready */ - aurora_wait_CCR(bp->r[chip]); - - /* Reset CD180 chip */ - sbus_writeb(CCR_HARDRESET, &bp->r[chip]->r[CD180_CCR]); - udelay(1); - sti(); - id=1000; - while((--id) && - (sbus_readb(&bp->r[chip]->r[CD180_GSVR])!=0xff))udelay(100); - if(!id) { - printk(KERN_ERR "aurora%d: Chip %d failed init.\n", - board_No(bp), chip); - restore_flags(flags); - return(-1); - } - cli(); - sbus_writeb((board_No(bp)<<5)|((chip+1)<<3), - &bp->r[chip]->r[CD180_GSVR]); /* Set ID for this chip */ - sbus_writeb(0x80|bp->ACK_MINT, - &bp->r[chip]->r[CD180_MSMR]); /* Prio for modem intr */ - sbus_writeb(0x80|bp->ACK_TINT, - &bp->r[chip]->r[CD180_TSMR]); /* Prio for transmitter intr */ - sbus_writeb(0x80|bp->ACK_RINT, - &bp->r[chip]->r[CD180_RSMR]); /* Prio for receiver intr */ - /* Setting up prescaler. We need 4 tick per 1 ms */ - sbus_writeb((bp->oscfreq/(1000000/AURORA_TPS)) >> 8, - &bp->r[chip]->r[CD180_PPRH]); - sbus_writeb((bp->oscfreq/(1000000/AURORA_TPS)) & 0xff, - &bp->r[chip]->r[CD180_PPRL]); - - sbus_writeb(SRCR_AUTOPRI|SRCR_GLOBPRI, - &bp->r[chip]->r[CD180_SRCR]); - - id = sbus_readb(&bp->r[chip]->r[CD180_GFRCR]); - printk(KERN_INFO "aurora%d: Chip %d id %02x: ", - board_No(bp), chip,id); - if(sbus_readb(&bp->r[chip]->r[CD180_SRCR]) & 128) { - switch (id) { - case 0x82:printk("CL-CD1864 rev A\n");break; - case 0x83:printk("CL-CD1865 rev A\n");break; - case 0x84:printk("CL-CD1865 rev B\n");break; - case 0x85:printk("CL-CD1865 rev C\n");break; - default:printk("Unknown.\n"); - }; - } else { - switch (id) { - case 0x81:printk("CL-CD180 rev B\n");break; - case 0x82:printk("CL-CD180 rev C\n");break; - default:printk("Unknown.\n"); - }; - } - restore_flags(flags); -#ifdef AURORA_DEBUG - printk("aurora_init_CD180: end\n"); -#endif - return 0; -} - -static int valid_irq(unsigned char irq) -{ -int i; -for(i=0;i<TYPE_1_IRQS;i++) - if (type_1_irq[i]==irq) return 1; -return 0; -} - -static irqreturn_t aurora_interrupt(int irq, void * dev_id); - -/* Main probing routine, also sets irq. */ -static int aurora_probe(void) -{ - struct sbus_bus *sbus; - struct sbus_dev *sdev; - int grrr; - char buf[30]; - int bn = 0; - struct Aurora_board *bp; - - for_each_sbus(sbus) { - for_each_sbusdev(sdev, sbus) { -/* printk("Try: %x %s\n",sdev,sdev->prom_name);*/ - if (!strcmp(sdev->prom_name, "sio16")) { -#ifdef AURORA_DEBUG - printk(KERN_INFO "aurora: sio16 at %p\n",sdev); -#endif - if((sdev->reg_addrs[0].reg_size!=1) && - (sdev->reg_addrs[1].reg_size!=128) && - (sdev->reg_addrs[2].reg_size!=128) && - (sdev->reg_addrs[3].reg_size!=4)) { - printk(KERN_ERR "aurora%d: registers' sizes " - "do not match.\n", bn); - break; - } - bp = &aurora_board[bn]; - bp->r0 = (struct aurora_reg1 *) - sbus_ioremap(&sdev->resource[0], 0, - sdev->reg_addrs[0].reg_size, - "sio16"); - if (bp->r0 == NULL) { - printk(KERN_ERR "aurora%d: can't map " - "reg_addrs[0]\n", bn); - break; - } -#ifdef AURORA_DEBUG - printk("Map reg 0: %p\n", bp->r0); -#endif - bp->r[0] = (struct aurora_reg128 *) - sbus_ioremap(&sdev->resource[1], 0, - sdev->reg_addrs[1].reg_size, - "sio16"); - if (bp->r[0] == NULL) { - printk(KERN_ERR "aurora%d: can't map " - "reg_addrs[1]\n", bn); - break; - } -#ifdef AURORA_DEBUG - printk("Map reg 1: %p\n", bp->r[0]); -#endif - bp->r[1] = (struct aurora_reg128 *) - sbus_ioremap(&sdev->resource[2], 0, - sdev->reg_addrs[2].reg_size, - "sio16"); - if (bp->r[1] == NULL) { - printk(KERN_ERR "aurora%d: can't map " - "reg_addrs[2]\n", bn); - break; - } -#ifdef AURORA_DEBUG - printk("Map reg 2: %p\n", bp->r[1]); -#endif - bp->r3 = (struct aurora_reg4 *) - sbus_ioremap(&sdev->resource[3], 0, - sdev->reg_addrs[3].reg_size, - "sio16"); - if (bp->r3 == NULL) { - printk(KERN_ERR "aurora%d: can't map " - "reg_addrs[3]\n", bn); - break; - } -#ifdef AURORA_DEBUG - printk("Map reg 3: %p\n", bp->r3); -#endif - /* Variables setup */ - bp->flags = 0; -#ifdef AURORA_DEBUG - grrr=prom_getint(sdev->prom_node,"intr"); - printk("intr pri %d\n", grrr); -#endif - if ((bp->irq=irqs[bn]) && valid_irq(bp->irq) && - !request_irq(bp->irq|0x30, aurora_interrupt, IRQF_SHARED, "sio16", bp)) { - free_irq(bp->irq|0x30, bp); - } else - if ((bp->irq=prom_getint(sdev->prom_node, "bintr")) && valid_irq(bp->irq) && - !request_irq(bp->irq|0x30, aurora_interrupt, IRQF_SHARED, "sio16", bp)) { - free_irq(bp->irq|0x30, bp); - } else - if ((bp->irq=prom_getint(sdev->prom_node, "intr")) && valid_irq(bp->irq) && - !request_irq(bp->irq|0x30, aurora_interrupt, IRQF_SHARED, "sio16", bp)) { - free_irq(bp->irq|0x30, bp); - } else - for(grrr=0;grrr<TYPE_1_IRQS;grrr++) { - if ((bp->irq=type_1_irq[grrr])&&!request_irq(bp->irq|0x30, aurora_interrupt, IRQF_SHARED, "sio16", bp)) { - free_irq(bp->irq|0x30, bp); - break; - } else { - printk(KERN_ERR "aurora%d: Could not get an irq for this board !!!\n",bn); - bp->flags=0xff; - } - } - if(bp->flags==0xff)break; - printk(KERN_INFO "aurora%d: irq %d\n",bn,bp->irq&0x0f); - buf[0]=0; - grrr=prom_getproperty(sdev->prom_node,"dtr_rts",buf,sizeof(buf)); - if(!strcmp(buf,"swapped")){ - printk(KERN_INFO "aurora%d: Swapped DTR and RTS\n",bn); - bp->DTR=MSVR_RTS; - bp->RTS=MSVR_DTR; - bp->MSVDTR=CD180_MSVRTS; - bp->MSVRTS=CD180_MSVDTR; - bp->flags|=AURORA_BOARD_DTR_FLOW_OK; - }else{ - #ifdef AURORA_FORCE_DTR_FLOW - printk(KERN_INFO "aurora%d: Forcing swapped DTR-RTS\n",bn); - bp->DTR=MSVR_RTS; - bp->RTS=MSVR_DTR; - bp->MSVDTR=CD180_MSVRTS; - bp->MSVRTS=CD180_MSVDTR; - bp->flags|=AURORA_BOARD_DTR_FLOW_OK; - #else - printk(KERN_INFO "aurora%d: Normal DTR and RTS\n",bn); - bp->DTR=MSVR_DTR; - bp->RTS=MSVR_RTS; - bp->MSVDTR=CD180_MSVDTR; - bp->MSVRTS=CD180_MSVRTS; - #endif - } - bp->oscfreq=prom_getint(sdev->prom_node,"clk")*100; - printk(KERN_INFO "aurora%d: Oscillator: %d Hz\n",bn,bp->oscfreq); - grrr=prom_getproperty(sdev->prom_node,"chip",buf,sizeof(buf)); - printk(KERN_INFO "aurora%d: Chips: %s\n",bn,buf); - grrr=prom_getproperty(sdev->prom_node,"manu",buf,sizeof(buf)); - printk(KERN_INFO "aurora%d: Manufacturer: %s\n",bn,buf); - grrr=prom_getproperty(sdev->prom_node,"model",buf,sizeof(buf)); - printk(KERN_INFO "aurora%d: Model: %s\n",bn,buf); - grrr=prom_getproperty(sdev->prom_node,"rev",buf,sizeof(buf)); - printk(KERN_INFO "aurora%d: Revision: %s\n",bn,buf); - grrr=prom_getproperty(sdev->prom_node,"mode",buf,sizeof(buf)); - printk(KERN_INFO "aurora%d: Mode: %s\n",bn,buf); - #ifdef MODULE - bp->count=0; - #endif - bp->flags = AURORA_BOARD_PRESENT; - /* hardware ack */ - bp->ACK_MINT=1; - bp->ACK_TINT=2; - bp->ACK_RINT=3; - bn++; - } - } - } - return bn; -} - -static void aurora_release_io_range(struct Aurora_board *bp) -{ - sbus_iounmap((unsigned long)bp->r0, 1); - sbus_iounmap((unsigned long)bp->r[0], 128); - sbus_iounmap((unsigned long)bp->r[1], 128); - sbus_iounmap((unsigned long)bp->r3, 4); -} - -static inline void aurora_mark_event(struct Aurora_port * port, int event) -{ -#ifdef AURORA_DEBUG - printk("aurora_mark_event: start\n"); -#endif - set_bit(event, &port->event); - queue_task(&port->tqueue, &tq_aurora); - mark_bh(AURORA_BH); -#ifdef AURORA_DEBUG - printk("aurora_mark_event: end\n"); -#endif -} - -static __inline__ struct Aurora_port * aurora_get_port(struct Aurora_board const * bp, - int chip, - unsigned char const *what) -{ - unsigned char channel; - struct Aurora_port * port; - - channel = ((chip << 3) | - ((sbus_readb(&bp->r[chip]->r[CD180_GSCR]) & GSCR_CHAN) >> GSCR_CHAN_OFF)); - port = &aurora_port[board_No(bp) * AURORA_NPORT * AURORA_NCD180 + channel]; - if (port->flags & ASYNC_INITIALIZED) - return port; - - printk(KERN_DEBUG "aurora%d: %s interrupt from invalid port %d\n", - board_No(bp), what, channel); - return NULL; -} - -static void aurora_receive_exc(struct Aurora_board const * bp, int chip) -{ - struct Aurora_port *port; - struct tty_struct *tty; - unsigned char status; - unsigned char ch; - - if (!(port = aurora_get_port(bp, chip, "Receive_x"))) - return; - - tty = port->tty; - if (tty->flip.count >= TTY_FLIPBUF_SIZE) { -#ifdef AURORA_INTNORM - printk("aurora%d: port %d: Working around flip buffer overflow.\n", - board_No(bp), port_No(port)); -#endif - return; - } - -#ifdef AURORA_REPORT_OVERRUN - status = sbus_readb(&bp->r[chip]->r[CD180_RCSR]); - if (status & RCSR_OE) { - port->overrun++; -#if 1 - printk("aurora%d: port %d: Overrun. Total %ld overruns.\n", - board_No(bp), port_No(port), port->overrun); -#endif - } - status &= port->mark_mask; -#else - status = sbus_readb(&bp->r[chip]->r[CD180_RCSR]) & port->mark_mask; -#endif - ch = sbus_readb(&bp->r[chip]->r[CD180_RDR]); - if (!status) - return; - - if (status & RCSR_TOUT) { -/* printk("aurora%d: port %d: Receiver timeout. Hardware problems ?\n", - board_No(bp), port_No(port));*/ - return; - - } else if (status & RCSR_BREAK) { - printk(KERN_DEBUG "aurora%d: port %d: Handling break...\n", - board_No(bp), port_No(port)); - *tty->flip.flag_buf_ptr++ = TTY_BREAK; - if (port->flags & ASYNC_SAK) - do_SAK(tty); - - } else if (status & RCSR_PE) - *tty->flip.flag_buf_ptr++ = TTY_PARITY; - - else if (status & RCSR_FE) - *tty->flip.flag_buf_ptr++ = TTY_FRAME; - - else if (status & RCSR_OE) - *tty->flip.flag_buf_ptr++ = TTY_OVERRUN; - - else - *tty->flip.flag_buf_ptr++ = 0; - - *tty->flip.char_buf_ptr++ = ch; - tty->flip.count++; - queue_task(&tty->flip.tqueue, &tq_timer); -} - -static void aurora_receive(struct Aurora_board const * bp, int chip) -{ - struct Aurora_port *port; - struct tty_struct *tty; - unsigned char count,cnt; - - if (!(port = aurora_get_port(bp, chip, "Receive"))) - return; - - tty = port->tty; - - count = sbus_readb(&bp->r[chip]->r[CD180_RDCR]); - -#ifdef AURORA_REPORT_FIFO - port->hits[count > 8 ? 9 : count]++; -#endif - - while (count--) { - if (tty->flip.count >= TTY_FLIPBUF_SIZE) { -#ifdef AURORA_INTNORM - printk("aurora%d: port %d: Working around flip buffer overflow.\n", - board_No(bp), port_No(port)); -#endif - break; - } - cnt = sbus_readb(&bp->r[chip]->r[CD180_RDR]); - *tty->flip.char_buf_ptr++ = cnt; - *tty->flip.flag_buf_ptr++ = 0; - tty->flip.count++; - } - queue_task(&tty->flip.tqueue, &tq_timer); -} - -static void aurora_transmit(struct Aurora_board const * bp, int chip) -{ - struct Aurora_port *port; - struct tty_struct *tty; - unsigned char count; - - if (!(port = aurora_get_port(bp, chip, "Transmit"))) - return; - - tty = port->tty; - - if (port->SRER & SRER_TXEMPTY) { - /* FIFO drained */ - sbus_writeb(port_No(port) & 7, - &bp->r[chip]->r[CD180_CAR]); - udelay(1); - port->SRER &= ~SRER_TXEMPTY; - sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); - return; - } - - if ((port->xmit_cnt <= 0 && !port->break_length) - || tty->stopped || tty->hw_stopped) { - sbus_writeb(port_No(port) & 7, - &bp->r[chip]->r[CD180_CAR]); - udelay(1); - port->SRER &= ~SRER_TXRDY; - sbus_writeb(port->SRER, - &bp->r[chip]->r[CD180_SRER]); - return; - } - - if (port->break_length) { - if (port->break_length > 0) { - if (port->COR2 & COR2_ETC) { - sbus_writeb(CD180_C_ESC, - &bp->r[chip]->r[CD180_TDR]); - sbus_writeb(CD180_C_SBRK, - &bp->r[chip]->r[CD180_TDR]); - port->COR2 &= ~COR2_ETC; - } - count = min(port->break_length, 0xff); - sbus_writeb(CD180_C_ESC, - &bp->r[chip]->r[CD180_TDR]); - sbus_writeb(CD180_C_DELAY, - &bp->r[chip]->r[CD180_TDR]); - sbus_writeb(count, - &bp->r[chip]->r[CD180_TDR]); - if (!(port->break_length -= count)) - port->break_length--; - } else { - sbus_writeb(CD180_C_ESC, - &bp->r[chip]->r[CD180_TDR]); - sbus_writeb(CD180_C_EBRK, - &bp->r[chip]->r[CD180_TDR]); - sbus_writeb(port->COR2, - &bp->r[chip]->r[CD180_COR2]); - aurora_wait_CCR(bp->r[chip]); - sbus_writeb(CCR_CORCHG2, - &bp->r[chip]->r[CD180_CCR]); - port->break_length = 0; - } - return; - } - - count = CD180_NFIFO; - do { - u8 byte = port->xmit_buf[port->xmit_tail++]; - - sbus_writeb(byte, &bp->r[chip]->r[CD180_TDR]); - port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE-1); - if (--port->xmit_cnt <= 0) - break; - } while (--count > 0); - - if (port->xmit_cnt <= 0) { - sbus_writeb(port_No(port) & 7, - &bp->r[chip]->r[CD180_CAR]); - udelay(1); - port->SRER &= ~SRER_TXRDY; - sbus_writeb(port->SRER, - &bp->r[chip]->r[CD180_SRER]); - } - if (port->xmit_cnt <= port->wakeup_chars) - aurora_mark_event(port, RS_EVENT_WRITE_WAKEUP); -} - -static void aurora_check_modem(struct Aurora_board const * bp, int chip) -{ - struct Aurora_port *port; - struct tty_struct *tty; - unsigned char mcr; - - if (!(port = aurora_get_port(bp, chip, "Modem"))) - return; - - tty = port->tty; - - mcr = sbus_readb(&bp->r[chip]->r[CD180_MCR]); - if (mcr & MCR_CDCHG) { - if (sbus_readb(&bp->r[chip]->r[CD180_MSVR]) & MSVR_CD) - wake_up_interruptible(&port->open_wait); - else - schedule_task(&port->tqueue_hangup); - } - -/* We don't have such things yet. My aurora board has DTR and RTS swapped, but that doesn't count in this driver. Let's hope - * Aurora didn't made any boards with CTS or DSR broken... - */ -/* #ifdef AURORA_BRAIN_DAMAGED_CTS - if (mcr & MCR_CTSCHG) { - if (aurora_in(bp, CD180_MSVR) & MSVR_CTS) { - tty->hw_stopped = 0; - port->SRER |= SRER_TXRDY; - if (port->xmit_cnt <= port->wakeup_chars) - aurora_mark_event(port, RS_EVENT_WRITE_WAKEUP); - } else { - tty->hw_stopped = 1; - port->SRER &= ~SRER_TXRDY; - } - sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); - } - if (mcr & MCR_DSRCHG) { - if (aurora_in(bp, CD180_MSVR) & MSVR_DSR) { - tty->hw_stopped = 0; - port->SRER |= SRER_TXRDY; - if (port->xmit_cnt <= port->wakeup_chars) - aurora_mark_event(port, RS_EVENT_WRITE_WAKEUP); - } else { - tty->hw_stopped = 1; - port->SRER &= ~SRER_TXRDY; - } - sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); - } -#endif AURORA_BRAIN_DAMAGED_CTS */ - - /* Clear change bits */ - sbus_writeb(0, &bp->r[chip]->r[CD180_MCR]); -} - -/* The main interrupt processing routine */ -static irqreturn_t aurora_interrupt(int irq, void * dev_id) -{ - unsigned char status; - unsigned char ack,chip/*,chip_id*/; - struct Aurora_board * bp = (struct Aurora_board *) dev_id; - unsigned long loop = 0; - -#ifdef AURORA_INT_DEBUG - printk("IRQ%d %d\n",irq,++irqhit); -#ifdef AURORA_FLOODPRO - if (irqhit>=AURORA_FLOODPRO) - sbus_writeb(8, &bp->r0->r); -#endif -#endif - -/* old bp = IRQ_to_board[irq&0x0f];*/ - - if (!bp || !(bp->flags & AURORA_BOARD_ACTIVE)) - return IRQ_NONE; - -/* The while() below takes care of this. - status = sbus_readb(&bp->r[0]->r[CD180_SRSR]); -#ifdef AURORA_INT_DEBUG - printk("mumu: %02x\n", status); -#endif - if (!(status&SRSR_ANYINT)) - return IRQ_NONE; * Nobody has anything to say, so exit * -*/ - while ((loop++ < 48) && - (status = sbus_readb(&bp->r[0]->r[CD180_SRSR]) & SRSR_ANYINT)){ -#ifdef AURORA_INT_DEBUG - printk("SRSR: %02x\n", status); -#endif - if (status & SRSR_REXT) { - ack = sbus_readb(&bp->r3->r[bp->ACK_RINT]); -#ifdef AURORA_INT_DEBUG - printk("R-ACK %02x\n", ack); -#endif - if ((ack >> 5) == board_No(bp)) { - if ((chip=((ack>>3)&3)-1) < AURORA_NCD180) { - if ((ack&GSVR_ITMASK)==GSVR_IT_RGD) { - aurora_receive(bp,chip); - sbus_writeb(0, - &bp->r[chip]->r[CD180_EOSRR]); - } else if ((ack & GSVR_ITMASK) == GSVR_IT_REXC) { - aurora_receive_exc(bp,chip); - sbus_writeb(0, - &bp->r[chip]->r[CD180_EOSRR]); - } - } - } - } else if (status & SRSR_TEXT) { - ack = sbus_readb(&bp->r3->r[bp->ACK_TINT]); -#ifdef AURORA_INT_DEBUG - printk("T-ACK %02x\n", ack); -#endif - if ((ack >> 5) == board_No(bp)) { - if ((chip=((ack>>3)&3)-1) < AURORA_NCD180) { - if ((ack&GSVR_ITMASK)==GSVR_IT_TX) { - aurora_transmit(bp,chip); - sbus_writeb(0, - &bp->r[chip]->r[CD180_EOSRR]); - } - } - } - } else if (status & SRSR_MEXT) { - ack = sbus_readb(&bp->r3->r[bp->ACK_MINT]); -#ifdef AURORA_INT_DEBUG - printk("M-ACK %02x\n", ack); -#endif - if ((ack >> 5) == board_No(bp)) { - if ((chip = ((ack>>3)&3)-1) < AURORA_NCD180) { - if ((ack&GSVR_ITMASK)==GSVR_IT_MDM) { - aurora_check_modem(bp,chip); - sbus_writeb(0, - &bp->r[chip]->r[CD180_EOSRR]); - } - } - } - } - } -/* I guess this faster code can be used with CD1865, using AUROPRI and GLOBPRI. */ -#if 0 - while ((loop++ < 48)&&(status=bp->r[0]->r[CD180_SRSR]&SRSR_ANYINT)){ -#ifdef AURORA_INT_DEBUG - printk("SRSR: %02x\n",status); -#endif - ack = sbus_readb(&bp->r3->r[0]); -#ifdef AURORA_INT_DEBUG - printk("ACK: %02x\n",ack); -#endif - if ((ack>>5)==board_No(bp)) { - if ((chip=((ack>>3)&3)-1) < AURORA_NCD180) { - ack&=GSVR_ITMASK; - if (ack==GSVR_IT_RGD) { - aurora_receive(bp,chip); - sbus_writeb(0, - &bp->r[chip]->r[CD180_EOSRR]); - } else if (ack==GSVR_IT_REXC) { - aurora_receive_exc(bp,chip); - sbus_writeb(0, - &bp->r[chip]->r[CD180_EOSRR]); - } else if (ack==GSVR_IT_TX) { - aurora_transmit(bp,chip); - sbus_writeb(0, - &bp->r[chip]->r[CD180_EOSRR]); - } else if (ack==GSVR_IT_MDM) { - aurora_check_modem(bp,chip); - sbus_writeb(0, - &bp->r[chip]->r[CD180_EOSRR]); - } - } - } - } -#endif - -/* This is the old handling routine, used in riscom8 for only one CD180. I keep it here for reference. */ -#if 0 - for(chip=0;chip<AURORA_NCD180;chip++){ - chip_id=(board_No(bp)<<5)|((chip+1)<<3); - loop=0; - while ((loop++ < 1) && - ((status = sbus_readb(&bp->r[chip]->r[CD180_SRSR])) & - (SRSR_TEXT | SRSR_MEXT | SRSR_REXT))) { - - if (status & SRSR_REXT) { - ack = sbus_readb(&bp->r3->r[bp->ACK_RINT]); - if (ack == (chip_id | GSVR_IT_RGD)) { -#ifdef AURORA_INTMSG - printk("RX ACK\n"); -#endif - aurora_receive(bp,chip); - } else if (ack == (chip_id | GSVR_IT_REXC)) { -#ifdef AURORA_INTMSG - printk("RXC ACK\n"); -#endif - aurora_receive_exc(bp,chip); - } else { -#ifdef AURORA_INTNORM - printk("aurora%d-%d: Bad receive ack 0x%02x.\n", - board_No(bp), chip, ack); -#endif - } - } else if (status & SRSR_TEXT) { - ack = sbus_readb(&bp->r3->r[bp->ACK_TINT]); - if (ack == (chip_id | GSVR_IT_TX)){ -#ifdef AURORA_INTMSG - printk("TX ACK\n"); -#endif - aurora_transmit(bp,chip); - } else { -#ifdef AURORA_INTNORM - printk("aurora%d-%d: Bad transmit ack 0x%02x.\n", - board_No(bp), chip, ack); -#endif - } - } else if (status & SRSR_MEXT) { - ack = sbus_readb(&bp->r3->r[bp->ACK_MINT]); - if (ack == (chip_id | GSVR_IT_MDM)){ -#ifdef AURORA_INTMSG - printk("MDM ACK\n"); -#endif - aurora_check_modem(bp,chip); - } else { -#ifdef AURORA_INTNORM - printk("aurora%d-%d: Bad modem ack 0x%02x.\n", - board_No(bp), chip, ack); -#endif - } - } - sbus_writeb(0, &bp->r[chip]->r[CD180_EOSRR]); - } - } -#endif - - return IRQ_HANDLED; -} - -#ifdef AURORA_INT_DEBUG -static void aurora_timer (unsigned long ignored); - -static DEFINE_TIMER(aurora_poll_timer, aurora_timer, 0, 0); - -static void -aurora_timer (unsigned long ignored) -{ - unsigned long flags; - int i; - - save_flags(flags); cli(); - - printk("SRSR: %02x,%02x - ", - sbus_readb(&aurora_board[0].r[0]->r[CD180_SRSR]), - sbus_readb(&aurora_board[0].r[1]->r[CD180_SRSR])); - for (i = 0; i < 4; i++) { - udelay(1); - printk("%02x ", - sbus_readb(&aurora_board[0].r3->r[i])); - } - printk("\n"); - - aurora_poll_timer.expires = jiffies + 300; - add_timer (&aurora_poll_timer); - - restore_flags(flags); -} -#endif - -/* - * Routines for open & close processing. - */ - -/* Called with disabled interrupts */ -static int aurora_setup_board(struct Aurora_board * bp) -{ - int error; - -#ifdef AURORA_ALLIRQ - int i; - for (i = 0; i < AURORA_ALLIRQ; i++) { - error = request_irq(allirq[i]|0x30, aurora_interrupt, IRQF_SHARED, - "sio16", bp); - if (error) - printk(KERN_ERR "IRQ%d request error %d\n", - allirq[i], error); - } -#else - error = request_irq(bp->irq|0x30, aurora_interrupt, IRQF_SHARED, - "sio16", bp); - if (error) { - printk(KERN_ERR "IRQ request error %d\n", error); - return error; - } -#endif - /* Board reset */ - sbus_writeb(0, &bp->r0->r); - udelay(1); - if (bp->flags & AURORA_BOARD_TYPE_2) { - /* unknown yet */ - } else { - sbus_writeb((AURORA_CFG_ENABLE_IO | AURORA_CFG_ENABLE_IRQ | - (((bp->irq)&0x0f)>>2)), - &bp->r0->r); - } - udelay(10000); - - if (aurora_init_CD180(bp,0))error=1;error=0; - if (aurora_init_CD180(bp,1))error++; - if (error == AURORA_NCD180) { - printk(KERN_ERR "Both chips failed initialisation.\n"); - return -EIO; - } - -#ifdef AURORA_INT_DEBUG - aurora_poll_timer.expires= jiffies + 1; - add_timer(&aurora_poll_timer); -#endif -#ifdef AURORA_DEBUG - printk("aurora_setup_board: end\n"); -#endif - return 0; -} - -/* Called with disabled interrupts */ -static void aurora_shutdown_board(struct Aurora_board *bp) -{ - int i; - -#ifdef AURORA_DEBUG - printk("aurora_shutdown_board: start\n"); -#endif - -#ifdef AURORA_INT_DEBUG - del_timer(&aurora_poll_timer); -#endif - -#ifdef AURORA_ALLIRQ - for(i=0;i<AURORA_ALLIRQ;i++){ - free_irq(allirq[i]|0x30, bp); -/* IRQ_to_board[allirq[i]&0xf] = NULL;*/ - } -#else - free_irq(bp->irq|0x30, bp); -/* IRQ_to_board[bp->irq&0xf] = NULL;*/ -#endif - /* Drop all DTR's */ - for(i=0;i<16;i++){ - sbus_writeb(i & 7, &bp->r[i>>3]->r[CD180_CAR]); - udelay(1); - sbus_writeb(0, &bp->r[i>>3]->r[CD180_MSVR]); - udelay(1); - } - /* Board shutdown */ - sbus_writeb(0, &bp->r0->r); - -#ifdef AURORA_DEBUG - printk("aurora_shutdown_board: end\n"); -#endif -} - -/* Setting up port characteristics. - * Must be called with disabled interrupts - */ -static void aurora_change_speed(struct Aurora_board *bp, struct Aurora_port *port) -{ - struct tty_struct *tty; - unsigned long baud; - long tmp; - unsigned char cor1 = 0, cor3 = 0; - unsigned char mcor1 = 0, mcor2 = 0,chip; - -#ifdef AURORA_DEBUG - printk("aurora_change_speed: start\n"); -#endif - if (!(tty = port->tty) || !tty->termios) - return; - - chip = AURORA_CD180(port_No(port)); - - port->SRER = 0; - port->COR2 = 0; - port->MSVR = MSVR_RTS|MSVR_DTR; - - baud = tty_get_baud_rate(tty); - - /* Select port on the board */ - sbus_writeb(port_No(port) & 7, - &bp->r[chip]->r[CD180_CAR]); - udelay(1); - - if (!baud) { - /* Drop DTR & exit */ - port->MSVR &= ~(bp->DTR|bp->RTS); - sbus_writeb(port->MSVR, - &bp->r[chip]->r[CD180_MSVR]); - return; - } else { - /* Set DTR on */ - port->MSVR |= bp->DTR; - sbus_writeb(port->MSVR, - &bp->r[chip]->r[CD180_MSVR]); - } - - /* Now we must calculate some speed dependent things. */ - - /* Set baud rate for port. */ - tmp = (((bp->oscfreq + baud/2) / baud + - CD180_TPC/2) / CD180_TPC); - -/* tmp = (bp->oscfreq/7)/baud; - if((tmp%10)>4)tmp=tmp/10+1;else tmp=tmp/10;*/ -/* printk("Prescaler period: %d\n",tmp);*/ - - sbus_writeb((tmp >> 8) & 0xff, - &bp->r[chip]->r[CD180_RBPRH]); - sbus_writeb((tmp >> 8) & 0xff, - &bp->r[chip]->r[CD180_TBPRH]); - sbus_writeb(tmp & 0xff, &bp->r[chip]->r[CD180_RBPRL]); - sbus_writeb(tmp & 0xff, &bp->r[chip]->r[CD180_TBPRL]); - - baud = (baud + 5) / 10; /* Estimated CPS */ - - /* Two timer ticks seems enough to wakeup something like SLIP driver */ - tmp = ((baud + HZ/2) / HZ) * 2 - CD180_NFIFO; - port->wakeup_chars = (tmp < 0) ? 0 : ((tmp >= SERIAL_XMIT_SIZE) ? - SERIAL_XMIT_SIZE - 1 : tmp); - - /* Receiver timeout will be transmission time for 1.5 chars */ - tmp = (AURORA_TPS + AURORA_TPS/2 + baud/2) / baud; - tmp = (tmp > 0xff) ? 0xff : tmp; - sbus_writeb(tmp, &bp->r[chip]->r[CD180_RTPR]); - - switch (C_CSIZE(tty)) { - case CS5: - cor1 |= COR1_5BITS; - break; - case CS6: - cor1 |= COR1_6BITS; - break; - case CS7: - cor1 |= COR1_7BITS; - break; - case CS8: - cor1 |= COR1_8BITS; - break; - } - - if (C_CSTOPB(tty)) - cor1 |= COR1_2SB; - - cor1 |= COR1_IGNORE; - if (C_PARENB(tty)) { - cor1 |= COR1_NORMPAR; - if (C_PARODD(tty)) - cor1 |= COR1_ODDP; - if (I_INPCK(tty)) - cor1 &= ~COR1_IGNORE; - } - /* Set marking of some errors */ - port->mark_mask = RCSR_OE | RCSR_TOUT; - if (I_INPCK(tty)) - port->mark_mask |= RCSR_FE | RCSR_PE; - if (I_BRKINT(tty) || I_PARMRK(tty)) - port->mark_mask |= RCSR_BREAK; - if (I_IGNPAR(tty)) - port->mark_mask &= ~(RCSR_FE | RCSR_PE); - if (I_IGNBRK(tty)) { - port->mark_mask &= ~RCSR_BREAK; - if (I_IGNPAR(tty)) - /* Real raw mode. Ignore all */ - port->mark_mask &= ~RCSR_OE; - } - /* Enable Hardware Flow Control */ - if (C_CRTSCTS(tty)) { -/*#ifdef AURORA_BRAIN_DAMAGED_CTS - port->SRER |= SRER_DSR | SRER_CTS; - mcor1 |= MCOR1_DSRZD | MCOR1_CTSZD; - mcor2 |= MCOR2_DSROD | MCOR2_CTSOD; - tty->hw_stopped = !(aurora_in(bp, CD180_MSVR) & (MSVR_CTS|MSVR_DSR)); -#else*/ - port->COR2 |= COR2_CTSAE; -/*#endif*/ - if (bp->flags&AURORA_BOARD_DTR_FLOW_OK) { - mcor1 |= AURORA_RXTH; - } - } - /* Enable Software Flow Control. FIXME: I'm not sure about this */ - /* Some people reported that it works, but I still doubt */ - if (I_IXON(tty)) { - port->COR2 |= COR2_TXIBE; - cor3 |= (COR3_FCT | COR3_SCDE); - if (I_IXANY(tty)) - port->COR2 |= COR2_IXM; - sbus_writeb(START_CHAR(tty), - &bp->r[chip]->r[CD180_SCHR1]); - sbus_writeb(STOP_CHAR(tty), - &bp->r[chip]->r[CD180_SCHR2]); - sbus_writeb(START_CHAR(tty), - &bp->r[chip]->r[CD180_SCHR3]); - sbus_writeb(STOP_CHAR(tty), - &bp->r[chip]->r[CD180_SCHR4]); - } - if (!C_CLOCAL(tty)) { - /* Enable CD check */ - port->SRER |= SRER_CD; - mcor1 |= MCOR1_CDZD; - mcor2 |= MCOR2_CDOD; - } - - if (C_CREAD(tty)) - /* Enable receiver */ - port->SRER |= SRER_RXD; - - /* Set input FIFO size (1-8 bytes) */ - cor3 |= AURORA_RXFIFO; - /* Setting up CD180 channel registers */ - sbus_writeb(cor1, &bp->r[chip]->r[CD180_COR1]); - sbus_writeb(port->COR2, &bp->r[chip]->r[CD180_COR2]); - sbus_writeb(cor3, &bp->r[chip]->r[CD180_COR3]); - /* Make CD180 know about registers change */ - aurora_wait_CCR(bp->r[chip]); - sbus_writeb(CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3, - &bp->r[chip]->r[CD180_CCR]); - /* Setting up modem option registers */ - sbus_writeb(mcor1, &bp->r[chip]->r[CD180_MCOR1]); - sbus_writeb(mcor2, &bp->r[chip]->r[CD180_MCOR2]); - /* Enable CD180 transmitter & receiver */ - aurora_wait_CCR(bp->r[chip]); - sbus_writeb(CCR_TXEN | CCR_RXEN, &bp->r[chip]->r[CD180_CCR]); - /* Enable interrupts */ - sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); - /* And finally set RTS on */ - sbus_writeb(port->MSVR, &bp->r[chip]->r[CD180_MSVR]); -#ifdef AURORA_DEBUG - printk("aurora_change_speed: end\n"); -#endif -} - -/* Must be called with interrupts enabled */ -static int aurora_setup_port(struct Aurora_board *bp, struct Aurora_port *port) -{ - unsigned long flags; - -#ifdef AURORA_DEBUG - printk("aurora_setup_port: start %d\n",port_No(port)); -#endif - if (port->flags & ASYNC_INITIALIZED) - return 0; - - if (!port->xmit_buf) { - /* We may sleep in get_zeroed_page() */ - unsigned long tmp; - - if (!(tmp = get_zeroed_page(GFP_KERNEL))) - return -ENOMEM; - - if (port->xmit_buf) { - free_page(tmp); - return -ERESTARTSYS; - } - port->xmit_buf = (unsigned char *) tmp; - } - - save_flags(flags); cli(); - - if (port->tty) - clear_bit(TTY_IO_ERROR, &port->tty->flags); - -#ifdef MODULE - if ((port->count == 1) && ((++bp->count) == 1)) - bp->flags |= AURORA_BOARD_ACTIVE; -#endif - - port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; - aurora_change_speed(bp, port); - port->flags |= ASYNC_INITIALIZED; - - restore_flags(flags); -#ifdef AURORA_DEBUG - printk("aurora_setup_port: end\n"); -#endif - return 0; -} - -/* Must be called with interrupts disabled */ -static void aurora_shutdown_port(struct Aurora_board *bp, struct Aurora_port *port) -{ - struct tty_struct *tty; - unsigned char chip; - -#ifdef AURORA_DEBUG - printk("aurora_shutdown_port: start\n"); -#endif - if (!(port->flags & ASYNC_INITIALIZED)) - return; - - chip = AURORA_CD180(port_No(port)); - -#ifdef AURORA_REPORT_OVERRUN - printk("aurora%d: port %d: Total %ld overruns were detected.\n", - board_No(bp), port_No(port), port->overrun); -#endif -#ifdef AURORA_REPORT_FIFO - { - int i; - - printk("aurora%d: port %d: FIFO hits [ ", - board_No(bp), port_No(port)); - for (i = 0; i < 10; i++) { - printk("%ld ", port->hits[i]); - } - printk("].\n"); - } -#endif - if (port->xmit_buf) { - free_page((unsigned long) port->xmit_buf); - port->xmit_buf = NULL; - } - - if (!(tty = port->tty) || C_HUPCL(tty)) { - /* Drop DTR */ - port->MSVR &= ~(bp->DTR|bp->RTS); - sbus_writeb(port->MSVR, - &bp->r[chip]->r[CD180_MSVR]); - } - - /* Select port */ - sbus_writeb(port_No(port) & 7, - &bp->r[chip]->r[CD180_CAR]); - udelay(1); - - /* Reset port */ - aurora_wait_CCR(bp->r[chip]); - sbus_writeb(CCR_SOFTRESET, &bp->r[chip]->r[CD180_CCR]); - - /* Disable all interrupts from this port */ - port->SRER = 0; - sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); - - if (tty) - set_bit(TTY_IO_ERROR, &tty->flags); - port->flags &= ~ASYNC_INITIALIZED; - -#ifdef MODULE - if (--bp->count < 0) { - printk(KERN_DEBUG "aurora%d: aurora_shutdown_port: " - "bad board count: %d\n", - board_No(bp), bp->count); - bp->count = 0; - } - - if (!bp->count) - bp->flags &= ~AURORA_BOARD_ACTIVE; -#endif - -#ifdef AURORA_DEBUG - printk("aurora_shutdown_port: end\n"); -#endif -} - - -static int block_til_ready(struct tty_struct *tty, struct file * filp, - struct Aurora_port *port) -{ - DECLARE_WAITQUEUE(wait, current); - struct Aurora_board *bp = port_Board(port); - int retval; - int do_clocal = 0; - int CD; - unsigned char chip; - -#ifdef AURORA_DEBUG - printk("block_til_ready: start\n"); -#endif - chip = AURORA_CD180(port_No(port)); - - /* If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) { - interruptible_sleep_on(&port->close_wait); - if (port->flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - else - return -ERESTARTSYS; - } - - /* If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || - (tty->flags & (1 << TTY_IO_ERROR))) { - port->flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - if (C_CLOCAL(tty)) - do_clocal = 1; - - /* Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, info->count is dropped by one, so that - * rs_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&port->open_wait, &wait); - cli(); - if (!tty_hung_up_p(filp)) - port->count--; - sti(); - port->blocked_open++; - while (1) { - cli(); - sbus_writeb(port_No(port) & 7, - &bp->r[chip]->r[CD180_CAR]); - udelay(1); - CD = sbus_readb(&bp->r[chip]->r[CD180_MSVR]) & MSVR_CD; - port->MSVR=bp->RTS; - - /* auto drops DTR */ - sbus_writeb(port->MSVR, &bp->r[chip]->r[CD180_MSVR]); - sti(); - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || - !(port->flags & ASYNC_INITIALIZED)) { - if (port->flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; - break; - } - if (!(port->flags & ASYNC_CLOSING) && - (do_clocal || CD)) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - schedule(); - } - current->state = TASK_RUNNING; - remove_wait_queue(&port->open_wait, &wait); - if (!tty_hung_up_p(filp)) - port->count++; - port->blocked_open--; - if (retval) - return retval; - - port->flags |= ASYNC_NORMAL_ACTIVE; -#ifdef AURORA_DEBUG - printk("block_til_ready: end\n"); -#endif - return 0; -} - -static int aurora_open(struct tty_struct * tty, struct file * filp) -{ - int board; - int error; - struct Aurora_port * port; - struct Aurora_board * bp; - unsigned long flags; - -#ifdef AURORA_DEBUG - printk("aurora_open: start\n"); -#endif - - board = AURORA_BOARD(tty->index); - if (board > AURORA_NBOARD || - !(aurora_board[board].flags & AURORA_BOARD_PRESENT)) { -#ifdef AURORA_DEBUG - printk("aurora_open: error board %d present %d\n", - board, aurora_board[board].flags & AURORA_BOARD_PRESENT); -#endif - return -ENODEV; - } - - bp = &aurora_board[board]; - port = aurora_port + board * AURORA_NPORT * AURORA_NCD180 + AURORA_PORT(tty->index); - if ((aurora_paranoia_check(port, tty->name, "aurora_open")) { -#ifdef AURORA_DEBUG - printk("aurora_open: error paranoia check\n"); -#endif - return -ENODEV; - } - - port->count++; - tty->driver_data = port; - port->tty = tty; - - if ((error = aurora_setup_port(bp, port))) { -#ifdef AURORA_DEBUG - printk("aurora_open: error aurora_setup_port ret %d\n",error); -#endif - return error; - } - - if ((error = block_til_ready(tty, filp, port))) { -#ifdef AURORA_DEBUG - printk("aurora_open: error block_til_ready ret %d\n",error); -#endif - return error; - } - -#ifdef AURORA_DEBUG - printk("aurora_open: end\n"); -#endif - return 0; -} - -static void aurora_close(struct tty_struct * tty, struct file * filp) -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - struct Aurora_board *bp; - unsigned long flags; - unsigned long timeout; - unsigned char chip; - -#ifdef AURORA_DEBUG - printk("aurora_close: start\n"); -#endif - - if (!port || (aurora_paranoia_check(port, tty->name, "close")) - return; - - chip = AURORA_CD180(port_No(port)); - - save_flags(flags); cli(); - if (tty_hung_up_p(filp)) { - restore_flags(flags); - return; - } - - bp = port_Board(port); - if ((tty->count == 1) && (port->count != 1)) { - printk(KERN_DEBUG "aurora%d: aurora_close: bad port count; " - "tty->count is 1, port count is %d\n", - board_No(bp), port->count); - port->count = 1; - } - if (--port->count < 0) { - printk(KERN_DEBUG "aurora%d: aurora_close: bad port " - "count for tty%d: %d\n", - board_No(bp), port_No(port), port->count); - port->count = 0; - } - if (port->count) { - restore_flags(flags); - return; - } - port->flags |= ASYNC_CLOSING; - - /* Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE){ -#ifdef AURORA_DEBUG - printk("aurora_close: waiting to flush...\n"); -#endif - tty_wait_until_sent(tty, port->closing_wait); - } - - /* At this point we stop accepting input. To do this, we - * disable the receive line status interrupts, and tell the - * interrupt driver to stop checking the data ready bit in the - * line status register. - */ - port->SRER &= ~SRER_RXD; - if (port->flags & ASYNC_INITIALIZED) { - port->SRER &= ~SRER_TXRDY; - port->SRER |= SRER_TXEMPTY; - sbus_writeb(port_No(port) & 7, - &bp->r[chip]->r[CD180_CAR]); - udelay(1); - sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important if there is a transmit FIFO! - */ - timeout = jiffies+HZ; - while(port->SRER & SRER_TXEMPTY) { - msleep_interruptible(jiffies_to_msecs(port->timeout)); - if (time_after(jiffies, timeout)) - break; - } - } -#ifdef AURORA_DEBUG - printk("aurora_close: shutdown_port\n"); -#endif - aurora_shutdown_port(bp, port); - if (tty->driver->flush_buffer) - tty->driver->flush_buffer(tty); - tty_ldisc_flush(tty); - tty->closing = 0; - port->event = 0; - port->tty = 0; - if (port->blocked_open) { - if (port->close_delay) { - msleep_interruptible(jiffies_to_msecs(port->close_delay)); - } - wake_up_interruptible(&port->open_wait); - } - port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&port->close_wait); - restore_flags(flags); -#ifdef AURORA_DEBUG - printk("aurora_close: end\n"); -#endif -} - -static int aurora_write(struct tty_struct * tty, - const unsigned char *buf, int count) -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - struct Aurora_board *bp; - int c, total = 0; - unsigned long flags; - unsigned char chip; - -#ifdef AURORA_DEBUG - printk("aurora_write: start %d\n",count); -#endif - if ((aurora_paranoia_check(port, tty->name, "aurora_write")) - return 0; - - chip = AURORA_CD180(port_No(port)); - - bp = port_Board(port); - - if (!tty || !port->xmit_buf || !tmp_buf) - return 0; - - save_flags(flags); - while (1) { - cli(); - c = min(count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1, - SERIAL_XMIT_SIZE - port->xmit_head)); - if (c <= 0) { - restore_flags(flags); - break; - } - memcpy(port->xmit_buf + port->xmit_head, buf, c); - port->xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE-1); - port->xmit_cnt += c; - restore_flags(flags); - - buf += c; - count -= c; - total += c; - } - - cli(); - if (port->xmit_cnt && !tty->stopped && !tty->hw_stopped && - !(port->SRER & SRER_TXRDY)) { - port->SRER |= SRER_TXRDY; - sbus_writeb(port_No(port) & 7, - &bp->r[chip]->r[CD180_CAR]); - udelay(1); - sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); - } - restore_flags(flags); -#ifdef AURORA_DEBUG - printk("aurora_write: end %d\n",total); -#endif - return total; -} - -static void aurora_put_char(struct tty_struct * tty, unsigned char ch) -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - unsigned long flags; - -#ifdef AURORA_DEBUG - printk("aurora_put_char: start %c\n",ch); -#endif - if ((aurora_paranoia_check(port, tty->name, "aurora_put_char")) - return; - - if (!tty || !port->xmit_buf) - return; - - save_flags(flags); cli(); - - if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) { - restore_flags(flags); - return; - } - - port->xmit_buf[port->xmit_head++] = ch; - port->xmit_head &= SERIAL_XMIT_SIZE - 1; - port->xmit_cnt++; - restore_flags(flags); -#ifdef AURORA_DEBUG - printk("aurora_put_char: end\n"); -#endif -} - -static void aurora_flush_chars(struct tty_struct * tty) -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - unsigned long flags; - unsigned char chip; - -/*#ifdef AURORA_DEBUG - printk("aurora_flush_chars: start\n"); -#endif*/ - if ((aurora_paranoia_check(port, tty->name, "aurora_flush_chars")) - return; - - chip = AURORA_CD180(port_No(port)); - - if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || - !port->xmit_buf) - return; - - save_flags(flags); cli(); - port->SRER |= SRER_TXRDY; - sbus_writeb(port_No(port) & 7, - &port_Board(port)->r[chip]->r[CD180_CAR]); - udelay(1); - sbus_writeb(port->SRER, - &port_Board(port)->r[chip]->r[CD180_SRER]); - restore_flags(flags); -/*#ifdef AURORA_DEBUG - printk("aurora_flush_chars: end\n"); -#endif*/ -} - -static int aurora_write_room(struct tty_struct * tty) -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - int ret; - -#ifdef AURORA_DEBUG - printk("aurora_write_room: start\n"); -#endif - if ((aurora_paranoia_check(port, tty->name, "aurora_write_room")) - return 0; - - ret = SERIAL_XMIT_SIZE - port->xmit_cnt - 1; - if (ret < 0) - ret = 0; -#ifdef AURORA_DEBUG - printk("aurora_write_room: end\n"); -#endif - return ret; -} - -static int aurora_chars_in_buffer(struct tty_struct *tty) -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - - if ((aurora_paranoia_check(port, tty->name, "aurora_chars_in_buffer")) - return 0; - - return port->xmit_cnt; -} - -static void aurora_flush_buffer(struct tty_struct *tty) -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - unsigned long flags; - -#ifdef AURORA_DEBUG - printk("aurora_flush_buffer: start\n"); -#endif - if ((aurora_paranoia_check(port, tty->name, "aurora_flush_buffer")) - return; - - save_flags(flags); cli(); - port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; - restore_flags(flags); - - tty_wakeup(tty); -#ifdef AURORA_DEBUG - printk("aurora_flush_buffer: end\n"); -#endif -} - -static int aurora_tiocmget(struct tty_struct *tty, struct file *file) -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - struct Aurora_board * bp; - unsigned char status,chip; - unsigned int result; - unsigned long flags; - -#ifdef AURORA_DEBUG - printk("aurora_get_modem_info: start\n"); -#endif - if ((aurora_paranoia_check(port, tty->name, __FUNCTION__)) - return -ENODEV; - - chip = AURORA_CD180(port_No(port)); - - bp = port_Board(port); - - save_flags(flags); cli(); - - sbus_writeb(port_No(port) & 7, &bp->r[chip]->r[CD180_CAR]); - udelay(1); - - status = sbus_readb(&bp->r[chip]->r[CD180_MSVR]); - result = 0/*bp->r[chip]->r[AURORA_RI] & (1u << port_No(port)) ? 0 : TIOCM_RNG*/; - - restore_flags(flags); - - result |= ((status & bp->RTS) ? TIOCM_RTS : 0) - | ((status & bp->DTR) ? TIOCM_DTR : 0) - | ((status & MSVR_CD) ? TIOCM_CAR : 0) - | ((status & MSVR_DSR) ? TIOCM_DSR : 0) - | ((status & MSVR_CTS) ? TIOCM_CTS : 0); - -#ifdef AURORA_DEBUG - printk("aurora_get_modem_info: end\n"); -#endif - return result; -} - -static int aurora_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - unsigned int arg; - unsigned long flags; - struct Aurora_board *bp = port_Board(port); - unsigned char chip; - -#ifdef AURORA_DEBUG - printk("aurora_set_modem_info: start\n"); -#endif - if ((aurora_paranoia_check(port, tty->name, __FUNCTION__)) - return -ENODEV; - - chip = AURORA_CD180(port_No(port)); - - save_flags(flags); cli(); - if (set & TIOCM_RTS) - port->MSVR |= bp->RTS; - if (set & TIOCM_DTR) - port->MSVR |= bp->DTR; - if (clear & TIOCM_RTS) - port->MSVR &= ~bp->RTS; - if (clear & TIOCM_DTR) - port->MSVR &= ~bp->DTR; - - sbus_writeb(port_No(port) & 7, &bp->r[chip]->r[CD180_CAR]); - udelay(1); - - sbus_writeb(port->MSVR, &bp->r[chip]->r[CD180_MSVR]); - - restore_flags(flags); -#ifdef AURORA_DEBUG - printk("aurora_set_modem_info: end\n"); -#endif - return 0; -} - -static void aurora_send_break(struct Aurora_port * port, unsigned long length) -{ - struct Aurora_board *bp = port_Board(port); - unsigned long flags; - unsigned char chip; - -#ifdef AURORA_DEBUG - printk("aurora_send_break: start\n"); -#endif - chip = AURORA_CD180(port_No(port)); - - save_flags(flags); cli(); - - port->break_length = AURORA_TPS / HZ * length; - port->COR2 |= COR2_ETC; - port->SRER |= SRER_TXRDY; - sbus_writeb(port_No(port) & 7, &bp->r[chip]->r[CD180_CAR]); - udelay(1); - - sbus_writeb(port->COR2, &bp->r[chip]->r[CD180_COR2]); - sbus_writeb(port->SRER, &bp->r[chip]->r[CD180_SRER]); - aurora_wait_CCR(bp->r[chip]); - - sbus_writeb(CCR_CORCHG2, &bp->r[chip]->r[CD180_CCR]); - aurora_wait_CCR(bp->r[chip]); - - restore_flags(flags); -#ifdef AURORA_DEBUG - printk("aurora_send_break: end\n"); -#endif -} - -static int aurora_set_serial_info(struct Aurora_port * port, - struct serial_struct * newinfo) -{ - struct serial_struct tmp; - struct Aurora_board *bp = port_Board(port); - int change_speed; - unsigned long flags; - -#ifdef AURORA_DEBUG - printk("aurora_set_serial_info: start\n"); -#endif - if (copy_from_user(&tmp, newinfo, sizeof(tmp))) - return -EFAULT; -#if 0 - if ((tmp.irq != bp->irq) || - (tmp.port != bp->base) || - (tmp.type != PORT_CIRRUS) || - (tmp.baud_base != (bp->oscfreq + CD180_TPC/2) / CD180_TPC) || - (tmp.custom_divisor != 0) || - (tmp.xmit_fifo_size != CD180_NFIFO) || - (tmp.flags & ~AURORA_LEGAL_FLAGS)) - return -EINVAL; -#endif - - change_speed = ((port->flags & ASYNC_SPD_MASK) != - (tmp.flags & ASYNC_SPD_MASK)); - - if (!capable(CAP_SYS_ADMIN)) { - if ((tmp.close_delay != port->close_delay) || - (tmp.closing_wait != port->closing_wait) || - ((tmp.flags & ~ASYNC_USR_MASK) != - (port->flags & ~ASYNC_USR_MASK))) - return -EPERM; - port->flags = ((port->flags & ~ASYNC_USR_MASK) | - (tmp.flags & ASYNC_USR_MASK)); - } else { - port->flags = ((port->flags & ~ASYNC_FLAGS) | - (tmp.flags & ASYNC_FLAGS)); - port->close_delay = tmp.close_delay; - port->closing_wait = tmp.closing_wait; - } - if (change_speed) { - save_flags(flags); cli(); - aurora_change_speed(bp, port); - restore_flags(flags); - } -#ifdef AURORA_DEBUG - printk("aurora_set_serial_info: end\n"); -#endif - return 0; -} - -extern int aurora_get_serial_info(struct Aurora_port * port, - struct serial_struct * retinfo) -{ - struct serial_struct tmp; - struct Aurora_board *bp = port_Board(port); - -#ifdef AURORA_DEBUG - printk("aurora_get_serial_info: start\n"); -#endif - if (!access_ok(VERIFY_WRITE, (void *) retinfo, sizeof(tmp))) - return -EFAULT; - - memset(&tmp, 0, sizeof(tmp)); - tmp.type = PORT_CIRRUS; - tmp.line = port - aurora_port; - tmp.port = 0; - tmp.irq = bp->irq; - tmp.flags = port->flags; - tmp.baud_base = (bp->oscfreq + CD180_TPC/2) / CD180_TPC; - tmp.close_delay = port->close_delay * HZ/100; - tmp.closing_wait = port->closing_wait * HZ/100; - tmp.xmit_fifo_size = CD180_NFIFO; - copy_to_user(retinfo, &tmp, sizeof(tmp)); -#ifdef AURORA_DEBUG -printk("aurora_get_serial_info: end\n"); -#endif - return 0; -} - -static int aurora_ioctl(struct tty_struct * tty, struct file * filp, - unsigned int cmd, unsigned long arg) - -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - int retval; - -#ifdef AURORA_DEBUG - printk("aurora_ioctl: start\n"); -#endif - if ((aurora_paranoia_check(port, tty->name, "aurora_ioctl")) - return -ENODEV; - - switch (cmd) { - case TCSBRK: /* SVID version: non-zero arg --> no break */ - retval = tty_check_change(tty); - if (retval) - return retval; - tty_wait_until_sent(tty, 0); - if (!arg) - aurora_send_break(port, HZ/4); /* 1/4 second */ - return 0; - case TCSBRKP: /* support for POSIX tcsendbreak() */ - retval = tty_check_change(tty); - if (retval) - return retval; - tty_wait_until_sent(tty, 0); - aurora_send_break(port, arg ? arg*(HZ/10) : HZ/4); - return 0; - case TIOCGSOFTCAR: - return put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long *)arg); - case TIOCSSOFTCAR: - if (get_user(arg,(unsigned long *)arg)) - return -EFAULT; - tty->termios->c_cflag = - ((tty->termios->c_cflag & ~CLOCAL) | - (arg ? CLOCAL : 0)); - return 0; - case TIOCGSERIAL: - return aurora_get_serial_info(port, (struct serial_struct *) arg); - case TIOCSSERIAL: - return aurora_set_serial_info(port, (struct serial_struct *) arg); - default: - return -ENOIOCTLCMD; - }; -#ifdef AURORA_DEBUG - printk("aurora_ioctl: end\n"); -#endif - return 0; -} - -static void aurora_throttle(struct tty_struct * tty) -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - struct Aurora_board *bp; - unsigned long flags; - unsigned char chip; - -#ifdef AURORA_DEBUG - printk("aurora_throttle: start\n"); -#endif - if ((aurora_paranoia_check(port, tty->name, "aurora_throttle")) - return; - - bp = port_Board(port); - chip = AURORA_CD180(port_No(port)); - - save_flags(flags); cli(); - port->MSVR &= ~bp->RTS; - sbus_writeb(port_No(port) & 7, &bp->r[chip]->r[CD180_CAR]); - udelay(1); - if (I_IXOFF(tty)) { - aurora_wait_CCR(bp->r[chip]); - sbus_writeb(CCR_SSCH2, &bp->r[chip]->r[CD180_CCR]); - aurora_wait_CCR(bp->r[chip]); - } - sbus_writeb(port->MSVR, &bp->r[chip]->r[CD180_MSVR]); - restore_flags(flags); -#ifdef AURORA_DEBUG - printk("aurora_throttle: end\n"); -#endif -} - -static void aurora_unthrottle(struct tty_struct * tty) -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - struct Aurora_board *bp; - unsigned long flags; - unsigned char chip; - -#ifdef AURORA_DEBUG - printk("aurora_unthrottle: start\n"); -#endif - if ((aurora_paranoia_check(port, tty->name, "aurora_unthrottle")) - return; - - bp = port_Board(port); - - chip = AURORA_CD180(port_No(port)); - - save_flags(flags); cli(); - port->MSVR |= bp->RTS; - sbus_writeb(port_No(port) & 7, - &bp->r[chip]->r[CD180_CAR]); - udelay(1); - if (I_IXOFF(tty)) { - aurora_wait_CCR(bp->r[chip]); - sbus_writeb(CCR_SSCH1, - &bp->r[chip]->r[CD180_CCR]); - aurora_wait_CCR(bp->r[chip]); - } - sbus_writeb(port->MSVR, &bp->r[chip]->r[CD180_MSVR]); - restore_flags(flags); -#ifdef AURORA_DEBUG - printk("aurora_unthrottle: end\n"); -#endif -} - -static void aurora_stop(struct tty_struct * tty) -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - struct Aurora_board *bp; - unsigned long flags; - unsigned char chip; - -#ifdef AURORA_DEBUG - printk("aurora_stop: start\n"); -#endif - if ((aurora_paranoia_check(port, tty->name, "aurora_stop")) - return; - - bp = port_Board(port); - - chip = AURORA_CD180(port_No(port)); - - save_flags(flags); cli(); - port->SRER &= ~SRER_TXRDY; - sbus_writeb(port_No(port) & 7, - &bp->r[chip]->r[CD180_CAR]); - udelay(1); - sbus_writeb(port->SRER, - &bp->r[chip]->r[CD180_SRER]); - restore_flags(flags); -#ifdef AURORA_DEBUG - printk("aurora_stop: end\n"); -#endif -} - -static void aurora_start(struct tty_struct * tty) -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - struct Aurora_board *bp; - unsigned long flags; - unsigned char chip; - -#ifdef AURORA_DEBUG - printk("aurora_start: start\n"); -#endif - if ((aurora_paranoia_check(port, tty->name, "aurora_start")) - return; - - bp = port_Board(port); - - chip = AURORA_CD180(port_No(port)); - - save_flags(flags); cli(); - if (port->xmit_cnt && port->xmit_buf && !(port->SRER & SRER_TXRDY)) { - port->SRER |= SRER_TXRDY; - sbus_writeb(port_No(port) & 7, - &bp->r[chip]->r[CD180_CAR]); - udelay(1); - sbus_writeb(port->SRER, - &bp->r[chip]->r[CD180_SRER]); - } - restore_flags(flags); -#ifdef AURORA_DEBUG - printk("aurora_start: end\n"); -#endif -} - -/* - * This routine is called from the scheduler tqueue when the interrupt - * routine has signalled that a hangup has occurred. The path of - * hangup processing is: - * - * serial interrupt routine -> (scheduler tqueue) -> - * do_aurora_hangup() -> tty->hangup() -> aurora_hangup() - * - */ -static void do_aurora_hangup(void *private_) -{ - struct Aurora_port *port = (struct Aurora_port *) private_; - struct tty_struct *tty; - -#ifdef AURORA_DEBUG - printk("do_aurora_hangup: start\n"); -#endif - tty = port->tty; - if (tty != NULL) { - tty_hangup(tty); /* FIXME: module removal race - AKPM */ -#ifdef AURORA_DEBUG - printk("do_aurora_hangup: end\n"); -#endif - } -} - -static void aurora_hangup(struct tty_struct * tty) -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - struct Aurora_board *bp; - -#ifdef AURORA_DEBUG - printk("aurora_hangup: start\n"); -#endif - if ((aurora_paranoia_check(port, tty->name, "aurora_hangup")) - return; - - bp = port_Board(port); - - aurora_shutdown_port(bp, port); - port->event = 0; - port->count = 0; - port->flags &= ~ASYNC_NORMAL_ACTIVE; - port->tty = 0; - wake_up_interruptible(&port->open_wait); -#ifdef AURORA_DEBUG - printk("aurora_hangup: end\n"); -#endif -} - -static void aurora_set_termios(struct tty_struct * tty, struct termios * old_termios) -{ - struct Aurora_port *port = (struct Aurora_port *) tty->driver_data; - unsigned long flags; - -#ifdef AURORA_DEBUG - printk("aurora_set_termios: start\n"); -#endif - if ((aurora_paranoia_check(port, tty->name, "aurora_set_termios")) - return; - - if (tty->termios->c_cflag == old_termios->c_cflag && - tty->termios->c_iflag == old_termios->c_iflag) - return; - - save_flags(flags); cli(); - aurora_change_speed(port_Board(port), port); - restore_flags(flags); - - if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { - tty->hw_stopped = 0; - aurora_start(tty); - } -#ifdef AURORA_DEBUG - printk("aurora_set_termios: end\n"); -#endif -} - -static void do_aurora_bh(void) -{ - run_task_queue(&tq_aurora); -} - -static void do_softint(void *private_) -{ - struct Aurora_port *port = (struct Aurora_port *) private_; - struct tty_struct *tty; - -#ifdef AURORA_DEBUG - printk("do_softint: start\n"); -#endif - tty = port->tty; - if (tty == NULL) - return; - - if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &port->event)) { - tty_wakeup(tty); - } -#ifdef AURORA_DEBUG - printk("do_softint: end\n"); -#endif -} - -static const struct tty_operations aurora_ops = { - .open = aurora_open, - .close = aurora_close, - .write = aurora_write, - .put_char = aurora_put_char, - .flush_chars = aurora_flush_chars, - .write_room = aurora_write_room, - .chars_in_buffer = aurora_chars_in_buffer, - .flush_buffer = aurora_flush_buffer, - .ioctl = aurora_ioctl, - .throttle = aurora_throttle, - .unthrottle = aurora_unthrottle, - .set_termios = aurora_set_termios, - .stop = aurora_stop, - .start = aurora_start, - .hangup = aurora_hangup, - .tiocmget = aurora_tiocmget, - .tiocmset = aurora_tiocmset, -}; - -static int aurora_init_drivers(void) -{ - int error; - int i; - -#ifdef AURORA_DEBUG - printk("aurora_init_drivers: start\n"); -#endif - tmp_buf = (unsigned char *) get_zeroed_page(GFP_KERNEL); - if (tmp_buf == NULL) { - printk(KERN_ERR "aurora: Couldn't get free page.\n"); - return 1; - } - init_bh(AURORA_BH, do_aurora_bh); - aurora_driver = alloc_tty_driver(AURORA_INPORTS); - if (!aurora_driver) { - printk(KERN_ERR "aurora: Couldn't allocate tty driver.\n"); - free_page((unsigned long) tmp_buf); - return 1; - } - aurora_driver->owner = THIS_MODULE; - aurora_driver->name = "ttyA"; - aurora_driver->major = AURORA_MAJOR; - aurora_driver->type = TTY_DRIVER_TYPE_SERIAL; - aurora_driver->subtype = SERIAL_TYPE_NORMAL; - aurora_driver->init_termios = tty_std_termios; - aurora_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - aurora_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(aurora_driver, &aurora_ops); - error = tty_register_driver(aurora_driver); - if (error) { - put_tty_driver(aurora_driver); - free_page((unsigned long) tmp_buf); - printk(KERN_ERR "aurora: Couldn't register aurora driver, error = %d\n", - error); - return 1; - } - - memset(aurora_port, 0, sizeof(aurora_port)); - for (i = 0; i < AURORA_TNPORTS; i++) { - aurora_port[i].magic = AURORA_MAGIC; - aurora_port[i].tqueue.routine = do_softint; - aurora_port[i].tqueue.data = &aurora_port[i]; - aurora_port[i].tqueue_hangup.routine = do_aurora_hangup; - aurora_port[i].tqueue_hangup.data = &aurora_port[i]; - aurora_port[i].close_delay = 50 * HZ/100; - aurora_port[i].closing_wait = 3000 * HZ/100; - init_waitqueue_head(&aurora_port[i].open_wait); - init_waitqueue_head(&aurora_port[i].close_wait); - } -#ifdef AURORA_DEBUG - printk("aurora_init_drivers: end\n"); -#endif - return 0; -} - -static void aurora_release_drivers(void) -{ -#ifdef AURORA_DEBUG - printk("aurora_release_drivers: start\n"); -#endif - free_page((unsigned long)tmp_buf); - tty_unregister_driver(aurora_driver); - put_tty_driver(aurora_driver); -#ifdef AURORA_DEBUG - printk("aurora_release_drivers: end\n"); -#endif -} - -/* - * Called at boot time. - * - * You can specify IO base for up to RC_NBOARD cards, - * using line "riscom8=0xiobase1,0xiobase2,.." at LILO prompt. - * Note that there will be no probing at default - * addresses in this case. - * - */ -void __init aurora_setup(char *str, int *ints) -{ - int i; - - for(i=0;(i<ints[0])&&(i<4);i++) { - if (ints[i+1]) irqs[i]=ints[i+1]; - } -} - -static int __init aurora_real_init(void) -{ - int found; - int i; - - printk(KERN_INFO "aurora: Driver starting.\n"); - if(aurora_init_drivers()) - return -EIO; - found = aurora_probe(); - if(!found) { - aurora_release_drivers(); - printk(KERN_INFO "aurora: No Aurora Multiport boards detected.\n"); - return -EIO; - } else { - printk(KERN_INFO "aurora: %d boards found.\n", found); - } - for (i = 0; i < found; i++) { - int ret = aurora_setup_board(&aurora_board[i]); - - if (ret) { -#ifdef AURORA_DEBUG - printk(KERN_ERR "aurora_init: error aurora_setup_board ret %d\n", - ret); -#endif - return ret; - } - } - return 0; -} - -int irq = 0; -int irq1 = 0; -int irq2 = 0; -int irq3 = 0; -module_param(irq , int, 0); -module_param(irq1, int, 0); -module_param(irq2, int, 0); -module_param(irq3, int, 0); - -static int __init aurora_init(void) -{ - if (irq ) irqs[0]=irq ; - if (irq1) irqs[1]=irq1; - if (irq2) irqs[2]=irq2; - if (irq3) irqs[3]=irq3; - return aurora_real_init(); -} - -static void __exit aurora_cleanup(void) -{ - int i; - -#ifdef AURORA_DEBUG -printk("cleanup_module: aurora_release_drivers\n"); -#endif - - aurora_release_drivers(); - for (i = 0; i < AURORA_NBOARD; i++) - if (aurora_board[i].flags & AURORA_BOARD_PRESENT) { - aurora_shutdown_board(&aurora_board[i]); - aurora_release_io_range(&aurora_board[i]); - } -} - -module_init(aurora_init); -module_exit(aurora_cleanup); -MODULE_LICENSE("GPL"); diff --git a/drivers/sbus/char/aurora.h b/drivers/sbus/char/aurora.h deleted file mode 100644 index b8b5476d986..00000000000 --- a/drivers/sbus/char/aurora.h +++ /dev/null @@ -1,276 +0,0 @@ -/* $Id: aurora.h,v 1.6 2001/06/05 12:23:38 davem Exp $ - * linux/drivers/sbus/char/aurora.h -- Aurora multiport driver - * - * Copyright (c) 1999 by Oliver Aldulea (oli@bv.ro) - * - * This code is based on the RISCom/8 multiport serial driver written - * by Dmitry Gorodchanin (pgmdsg@ibi.com), based on the Linux serial - * driver, written by Linus Torvalds, Theodore T'so and others. - * The Aurora multiport programming info was obtained mainly from the - * Cirrus Logic CD180 documentation (available on the web), and by - * doing heavy tests on the board. Many thanks to Eddie C. Dost for the - * help on the sbus interface. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Revision 1.0 - * - * This is the first public release. - * - * This version needs a lot of feedback. This is the version that works - * with _my_ board. My board is model 1600se, revision '@(#)1600se.fth - * 1.2 3/28/95 1'. The driver might work with your board, but I do not - * guarantee it. If you have _any_ type of board, I need to know if the - * driver works or not, I need to know exactly your board parameters - * (get them with 'cd /proc/openprom/iommu/sbus/sio16/; ls *; cat *') - * Also, I need your board revision code, which is written on the board. - * Send me the output of my driver too (it outputs through klogd). - * - * If the driver does not work, you can try enabling the debug options - * to see what's wrong or what should be done. - * - * I'm sorry about the alignment of the code. It was written in a - * 128x48 environment. - * - * I must say that I do not like Aurora Technologies' policy. I asked - * them to help me do this driver faster, but they ended by something - * like "don't call us, we'll call you", and I never heard anything - * from them. They told me "knowing the way the board works, I don't - * doubt you and others on the net will make the driver." - * The truth about this board is that it has nothing intelligent on it. - * If you want to say to somebody what kind of board you have, say that - * it uses Cirrus Logic processors (CD180). The power of the board is - * in those two chips. The rest of the board is the interface to the - * sbus and to the peripherals. Still, they did something smart: they - * reversed DTR and RTS to make on-board automatic hardware flow - * control usable. - * Thanks to Aurora Technologies for wasting my time, nerves and money. - */ - -#ifndef __LINUX_AURORA_H -#define __LINUX_AURORA_H - -#include <linux/serial.h> -#include <linux/serialP.h> - -#ifdef __KERNEL__ - -/* This is the number of boards to support. I've only tested this driver with - * one board, so it might not work. - */ -#define AURORA_NBOARD 1 - -/* Useful ? Yes. But you can safely comment the warnings if they annoy you - * (let me say that again: the warnings in the code, not this define). - */ -#define AURORA_PARANOIA_CHECK - -/* Well, after many lost nights, I found that the IRQ for this board is - * selected from four built-in values by writing some bits in the - * configuration register. This causes a little problem to occur: which - * IRQ to select ? Which one is the best for the user ? Well, I finally - * decided for the following algorithm: if the "bintr" value is not acceptable - * (not within type_1_irq[], then test the "intr" value, if that fails too, - * try each value from type_1_irq until succeded. Hope it's ok. - * You can safely reorder the irq's. - */ -#define TYPE_1_IRQS 4 -unsigned char type_1_irq[TYPE_1_IRQS] = { - 3, 5, 9, 13 -}; -/* I know something about another method of interrupt setting, but not enough. - * Also, this is for another type of board, so I first have to learn how to - * detect it. -#define TYPE_2_IRQS 3 -unsigned char type_2_irq[TYPE_2_IRQS] = { - 0, 0, 0 ** could anyone find these for me ? (see AURORA_ALLIRQ below) ** - }; -unsigned char type_2_mask[TYPE_2_IRQS] = { - 32, 64, 128 - }; -*/ - -/* The following section should only be modified by those who know what - * they're doing (or don't, but want to help with some feedback). Modifying - * anything raises a _big_ probability for your system to hang, but the - * sacrifice worths. (I sacrificed my ext2fs many, many times...) - */ - -/* This one tries to dump to console the name of almost every function called, - * and many other debugging info. - */ -#undef AURORA_DEBUG - -/* These are the most dangerous and useful defines. They do printk() during - * the interrupt processing routine(s), so if you manage to get "flooded" by - * irq's, start thinking about the "Power off/on" button... - */ -#undef AURORA_INTNORM /* This one enables the "normal" messages, but some - * of them cause flood, so I preffered putting - * them under a define */ -#undef AURORA_INT_DEBUG /* This one is really bad. */ - -/* Here's something helpful: after n irq's, the board will be disabled. This - * prevents irq flooding during debug (no need to think about power - * off/on anymore...) - */ -#define AURORA_FLOODPRO 10 - -/* This one helps finding which irq the board calls, in case of a strange/ - * unsupported board. AURORA_INT_DEBUG should be enabled, because I don't - * think /proc/interrupts or any command will be available in case of an irq - * flood... "allirq" is the list of all free irq's. - */ -/* -#define AURORA_ALLIRQ 6 -int allirq[AURORA_ALLIRQ]={ - 2,3,5,7,9,13 - }; -*/ - -/* These must not be modified. These values are assumed during the code for - * performance optimisations. - */ -#define AURORA_NCD180 2 /* two chips per board */ -#define AURORA_NPORT 8 /* 8 ports per chip */ - -/* several utilities */ -#define AURORA_BOARD(line) (((line) >> 4) & 0x01) -#define AURORA_CD180(line) (((line) >> 3) & 0x01) -#define AURORA_PORT(line) ((line) & 15) - -#define AURORA_TNPORTS (AURORA_NBOARD*AURORA_NCD180*AURORA_NPORT) - -/* Ticks per sec. Used for setting receiver timeout and break length */ -#define AURORA_TPS 4000 - -#define AURORA_MAGIC 0x0A18 - -/* Yeah, after heavy testing I decided it must be 6. - * Sure, You can change it if needed. - */ -#define AURORA_RXFIFO 6 /* Max. receiver FIFO size (1-8) */ - -#define AURORA_RXTH 7 - -struct aurora_reg1 { - __volatile__ unsigned char r; -}; - -struct aurora_reg128 { - __volatile__ unsigned char r[128]; -}; - -struct aurora_reg4 { - __volatile__ unsigned char r[4]; -}; - -struct Aurora_board { - unsigned long flags; - struct aurora_reg1 * r0; /* This is the board configuration - * register (write-only). */ - struct aurora_reg128 * r[2]; /* These are the registers for the - * two chips. */ - struct aurora_reg4 * r3; /* These are used for hardware-based - * acknowledge. Software-based ack is - * not supported by CD180. */ - unsigned int oscfreq; /* The on-board oscillator - * frequency, in Hz. */ - unsigned char irq; -#ifdef MODULE - signed char count; /* counts the use of the board */ -#endif - /* Values for the dtr_rts swapped mode. */ - unsigned char DTR; - unsigned char RTS; - unsigned char MSVDTR; - unsigned char MSVRTS; - /* Values for hardware acknowledge. */ - unsigned char ACK_MINT, ACK_TINT, ACK_RINT; -}; - -/* Board configuration register */ -#define AURORA_CFG_ENABLE_IO 8 -#define AURORA_CFG_ENABLE_IRQ 4 - -/* Board flags */ -#define AURORA_BOARD_PRESENT 0x00000001 -#define AURORA_BOARD_ACTIVE 0x00000002 -#define AURORA_BOARD_TYPE_2 0x00000004 /* don't know how to - * detect this yet */ -#define AURORA_BOARD_DTR_FLOW_OK 0x00000008 - -/* The story goes like this: Cirrus programmed the CD-180 chip to do automatic - * hardware flow control, and do it using CTS and DTR. CTS is ok, but, if you - * have a modem and the chip drops DTR, then the modem will drop the carrier - * (ain't that cute...). Luckily, the guys at Aurora decided to swap DTR and - * RTS, which makes the flow control usable. I hope that all the boards made - * by Aurora have these two signals swapped. If your's doesn't but you have a - * breakout box, you can try to reverse them yourself, then set the following - * flag. - */ -#undef AURORA_FORCE_DTR_FLOW - -/* In fact, a few more words have to be said about hardware flow control. - * This driver handles "output" flow control through the on-board facility - * CTS Auto Enable. For the "input" flow control there are two cases when - * the flow should be controlled. The first case is when the kernel is so - * busy that it cannot process IRQ's in time; this flow control can only be - * activated by the on-board chip, and if the board has RTS and DTR swapped, - * this facility is usable. The second case is when the application is so - * busy that it cannot receive bytes from the kernel, and this flow must be - * activated by software. This second case is not yet implemented in this - * driver. Unfortunately, I estimate that the second case is the one that - * occurs the most. - */ - - -struct Aurora_port { - int magic; - int baud_base; - int flags; - struct tty_struct * tty; - int count; - int blocked_open; - long event; - int timeout; - int close_delay; - unsigned char * xmit_buf; - int custom_divisor; - int xmit_head; - int xmit_tail; - int xmit_cnt; - wait_queue_head_t open_wait; - wait_queue_head_t close_wait; - struct tq_struct tqueue; - struct tq_struct tqueue_hangup; - short wakeup_chars; - short break_length; - unsigned short closing_wait; - unsigned char mark_mask; - unsigned char SRER; - unsigned char MSVR; - unsigned char COR2; -#ifdef AURORA_REPORT_OVERRUN - unsigned long overrun; -#endif -#ifdef AURORA_REPORT_FIFO - unsigned long hits[10]; -#endif -}; - -#endif -#endif /*__LINUX_AURORA_H*/ - diff --git a/drivers/sbus/char/bbc_i2c.c b/drivers/sbus/char/bbc_i2c.c index 22631f8b9b4..8410587348f 100644 --- a/drivers/sbus/char/bbc_i2c.c +++ b/drivers/sbus/char/bbc_i2c.c @@ -187,19 +187,20 @@ static int wait_for_pin(struct bbc_i2c_bus *bp, u8 *status) bp->waiting = 1; add_wait_queue(&bp->wq, &wait); while (limit-- > 0) { - u8 val; - - set_current_state(TASK_INTERRUPTIBLE); - *status = val = readb(bp->i2c_control_regs + 0); - if ((val & I2C_PCF_PIN) == 0) { + unsigned long val; + + val = wait_event_interruptible_timeout( + bp->wq, + (((*status = readb(bp->i2c_control_regs + 0)) + & I2C_PCF_PIN) == 0), + msecs_to_jiffies(250)); + if (val > 0) { ret = 0; break; } - msleep_interruptible(250); } remove_wait_queue(&bp->wq, &wait); bp->waiting = 0; - current->state = TASK_RUNNING; return ret; } @@ -340,7 +341,7 @@ static irqreturn_t bbc_i2c_interrupt(int irq, void *dev_id) */ if (bp->waiting && !(readb(bp->i2c_control_regs + 0x0) & I2C_PCF_PIN)) - wake_up(&bp->wq); + wake_up_interruptible(&bp->wq); return IRQ_HANDLED; } diff --git a/drivers/sbus/char/cd180.h b/drivers/sbus/char/cd180.h deleted file mode 100644 index 445b86cc65e..00000000000 --- a/drivers/sbus/char/cd180.h +++ /dev/null @@ -1,240 +0,0 @@ - -/* Definitions for Cirrus Logic CL-CD180 8-port async mux chip */ -#define CD180_NCH 8 /* Total number of channels */ -#define CD180_TPC 16 /* Ticks per character */ -#define CD180_NFIFO 8 /* TX FIFO size */ - -/* Global registers */ -#define CD180_GFRCR 0x6b /* Global Firmware Revision Code Register */ -#define CD180_SRCR 0x66 /* Service Request Configuration Register */ -#define CD180_PPRH 0x70 /* Prescaler Period Register High */ -#define CD180_PPRL 0x71 /* Prescaler Period Register Low */ -#define CD180_MSMR 0x61 /* Modem Service Match Register */ -#define CD180_TSMR 0x62 /* Transmit Service Match Register */ -#define CD180_RSMR 0x63 /* Receive Service Match Register */ -#define CD180_GSVR 0x40 /* Global Service Vector Register */ -#define CD180_SRSR 0x65 /* Service Request Status Register */ -#define CD180_GSCR 0x41 /* Global Service Channel Register */ -#define CD180_CAR 0x64 /* Channel Access Register */ - -/* Indexed registers */ -#define CD180_RDCR 0x07 /* Receive Data Count Register */ -#define CD180_RDR 0x78 /* Receiver Data Register */ -#define CD180_RCSR 0x7a /* Receiver Character Status Register */ -#define CD180_TDR 0x7b /* Transmit Data Register */ -#define CD180_EOSRR 0x7f /* End of Service Request Register */ - -/* Channel Registers */ -#define CD180_SRER 0x02 /* Service Request Enable Register */ -#define CD180_CCR 0x01 /* Channel Command Register */ -#define CD180_COR1 0x03 /* Channel Option Register 1 */ -#define CD180_COR2 0x04 /* Channel Option Register 2 */ -#define CD180_COR3 0x05 /* Channel Option Register 3 */ -#define CD180_CCSR 0x06 /* Channel Control Status Register */ -#define CD180_RTPR 0x18 /* Receive Timeout Period Register */ -#define CD180_RBPRH 0x31 /* Receive Bit Rate Period Register High */ -#define CD180_RBPRL 0x32 /* Receive Bit Rate Period Register Low */ -#define CD180_TBPRH 0x39 /* Transmit Bit Rate Period Register High */ -#define CD180_TBPRL 0x3a /* Transmit Bit Rate Period Register Low */ -#define CD180_SCHR1 0x09 /* Special Character Register 1 */ -#define CD180_SCHR2 0x0a /* Special Character Register 2 */ -#define CD180_SCHR3 0x0b /* Special Character Register 3 */ -#define CD180_SCHR4 0x0c /* Special Character Register 4 */ -#define CD180_MCR 0x12 /* Modem Change Register */ -#define CD180_MCOR1 0x10 /* Modem Change Option 1 Register */ -#define CD180_MCOR2 0x11 /* Modem Change Option 2 Register */ -#define CD180_MSVR 0x28 /* Modem Signal Value Register */ -#define CD180_MSVRTS 0x29 /* Modem Signal Value RTS */ -#define CD180_MSVDTR 0x2a /* Modem Signal Value DTR */ - -/* Global Interrupt Vector Register (R/W) */ - -#define GSVR_ITMASK 0x07 /* Interrupt type mask */ -#define GSVR_IT_MDM 0x01 /* Modem Signal Change Interrupt */ -#define GSVR_IT_TX 0x02 /* Transmit Data Interrupt */ -#define GSVR_IT_RGD 0x03 /* Receive Good Data Interrupt */ -#define GSVR_IT_REXC 0x07 /* Receive Exception Interrupt */ - - -/* Global Interrupt Channel Register (R/W) */ - -#define GSCR_CHAN 0x1c /* Channel Number Mask */ -#define GSCR_CHAN_OFF 2 /* Channel Number Offset */ - - -/* Channel Address Register (R/W) */ - -#define CAR_CHAN 0x07 /* Channel Number Mask */ - - -/* Receive Character Status Register (R/O) */ - -#define RCSR_TOUT 0x80 /* Rx Timeout */ -#define RCSR_SCDET 0x70 /* Special Character Detected Mask */ -#define RCSR_NO_SC 0x00 /* No Special Characters Detected */ -#define RCSR_SC_1 0x10 /* Special Char 1 (or 1 & 3) Detected */ -#define RCSR_SC_2 0x20 /* Special Char 2 (or 2 & 4) Detected */ -#define RCSR_SC_3 0x30 /* Special Char 3 Detected */ -#define RCSR_SC_4 0x40 /* Special Char 4 Detected */ -#define RCSR_BREAK 0x08 /* Break has been detected */ -#define RCSR_PE 0x04 /* Parity Error */ -#define RCSR_FE 0x02 /* Frame Error */ -#define RCSR_OE 0x01 /* Overrun Error */ - - -/* Channel Command Register (R/W) (commands in groups can be OR-ed) */ - -#define CCR_HARDRESET 0x81 /* Reset the chip */ - -#define CCR_SOFTRESET 0x80 /* Soft Channel Reset */ - -#define CCR_CORCHG1 0x42 /* Channel Option Register 1 Changed */ -#define CCR_CORCHG2 0x44 /* Channel Option Register 2 Changed */ -#define CCR_CORCHG3 0x48 /* Channel Option Register 3 Changed */ - -#define CCR_SSCH1 0x21 /* Send Special Character 1 */ - -#define CCR_SSCH2 0x22 /* Send Special Character 2 */ - -#define CCR_SSCH3 0x23 /* Send Special Character 3 */ - -#define CCR_SSCH4 0x24 /* Send Special Character 4 */ - -#define CCR_TXEN 0x18 /* Enable Transmitter */ -#define CCR_RXEN 0x12 /* Enable Receiver */ - -#define CCR_TXDIS 0x14 /* Disable Transmitter */ -#define CCR_RXDIS 0x11 /* Disable Receiver */ - - -/* Service Request Enable Register (R/W) */ - -#define SRER_DSR 0x80 /* Enable interrupt on DSR change */ -#define SRER_CD 0x40 /* Enable interrupt on CD change */ -#define SRER_CTS 0x20 /* Enable interrupt on CTS change */ -#define SRER_RXD 0x10 /* Enable interrupt on Receive Data */ -#define SRER_RXSC 0x08 /* Enable interrupt on Receive Spec. Char */ -#define SRER_TXRDY 0x04 /* Enable interrupt on TX FIFO empty */ -#define SRER_TXEMPTY 0x02 /* Enable interrupt on TX completely empty */ -#define SRER_RET 0x01 /* Enable interrupt on RX Exc. Timeout */ - - -/* Channel Option Register 1 (R/W) */ - -#define COR1_ODDP 0x80 /* Odd Parity */ -#define COR1_PARMODE 0x60 /* Parity Mode mask */ -#define COR1_NOPAR 0x00 /* No Parity */ -#define COR1_FORCEPAR 0x20 /* Force Parity */ -#define COR1_NORMPAR 0x40 /* Normal Parity */ -#define COR1_IGNORE 0x10 /* Ignore Parity on RX */ -#define COR1_STOPBITS 0x0c /* Number of Stop Bits */ -#define COR1_1SB 0x00 /* 1 Stop Bit */ -#define COR1_15SB 0x04 /* 1.5 Stop Bits */ -#define COR1_2SB 0x08 /* 2 Stop Bits */ -#define COR1_CHARLEN 0x03 /* Character Length */ -#define COR1_5BITS 0x00 /* 5 bits */ -#define COR1_6BITS 0x01 /* 6 bits */ -#define COR1_7BITS 0x02 /* 7 bits */ -#define COR1_8BITS 0x03 /* 8 bits */ - - -/* Channel Option Register 2 (R/W) */ - -#define COR2_IXM 0x80 /* Implied XON mode */ -#define COR2_TXIBE 0x40 /* Enable In-Band (XON/XOFF) Flow Control */ -#define COR2_ETC 0x20 /* Embedded Tx Commands Enable */ -#define COR2_LLM 0x10 /* Local Loopback Mode */ -#define COR2_RLM 0x08 /* Remote Loopback Mode */ -#define COR2_RTSAO 0x04 /* RTS Automatic Output Enable */ -#define COR2_CTSAE 0x02 /* CTS Automatic Enable */ -#define COR2_DSRAE 0x01 /* DSR Automatic Enable */ - - -/* Channel Option Register 3 (R/W) */ - -#define COR3_XONCH 0x80 /* XON is a pair of characters (1 & 3) */ -#define COR3_XOFFCH 0x40 /* XOFF is a pair of characters (2 & 4) */ -#define COR3_FCT 0x20 /* Flow-Control Transparency Mode */ -#define COR3_SCDE 0x10 /* Special Character Detection Enable */ -#define COR3_RXTH 0x0f /* RX FIFO Threshold value (1-8) */ - - -/* Channel Control Status Register (R/O) */ - -#define CCSR_RXEN 0x80 /* Receiver Enabled */ -#define CCSR_RXFLOFF 0x40 /* Receive Flow Off (XOFF was sent) */ -#define CCSR_RXFLON 0x20 /* Receive Flow On (XON was sent) */ -#define CCSR_TXEN 0x08 /* Transmitter Enabled */ -#define CCSR_TXFLOFF 0x04 /* Transmit Flow Off (got XOFF) */ -#define CCSR_TXFLON 0x02 /* Transmit Flow On (got XON) */ - - -/* Modem Change Option Register 1 (R/W) */ - -#define MCOR1_DSRZD 0x80 /* Detect 0->1 transition of DSR */ -#define MCOR1_CDZD 0x40 /* Detect 0->1 transition of CD */ -#define MCOR1_CTSZD 0x20 /* Detect 0->1 transition of CTS */ -#define MCOR1_DTRTH 0x0f /* Auto DTR flow control Threshold (1-8) */ -#define MCOR1_NODTRFC 0x0 /* Automatic DTR flow control disabled */ - - -/* Modem Change Option Register 2 (R/W) */ - -#define MCOR2_DSROD 0x80 /* Detect 1->0 transition of DSR */ -#define MCOR2_CDOD 0x40 /* Detect 1->0 transition of CD */ -#define MCOR2_CTSOD 0x20 /* Detect 1->0 transition of CTS */ - - -/* Modem Change Register (R/W) */ - -#define MCR_DSRCHG 0x80 /* DSR Changed */ -#define MCR_CDCHG 0x40 /* CD Changed */ -#define MCR_CTSCHG 0x20 /* CTS Changed */ - - -/* Modem Signal Value Register (R/W) */ - -#define MSVR_DSR 0x80 /* Current state of DSR input */ -#define MSVR_CD 0x40 /* Current state of CD input */ -#define MSVR_CTS 0x20 /* Current state of CTS input */ -#define MSVR_DTR 0x02 /* Current state of DTR output */ -#define MSVR_RTS 0x01 /* Current state of RTS output */ - - -/* Service Request Status Register */ - -#define SRSR_CMASK 0xC0 /* Current Service Context Mask */ -#define SRSR_CNONE 0x00 /* Not in a service context */ -#define SRSR_CRX 0x40 /* Rx Context */ -#define SRSR_CTX 0x80 /* Tx Context */ -#define SRSR_CMDM 0xC0 /* Modem Context */ -#define SRSR_ANYINT 0x6F /* Any interrupt flag */ -#define SRSR_RINT 0x10 /* Receive Interrupt */ -#define SRSR_TINT 0x04 /* Transmit Interrupt */ -#define SRSR_MINT 0x01 /* Modem Interrupt */ -#define SRSR_REXT 0x20 /* Receive External Interrupt */ -#define SRSR_TEXT 0x08 /* Transmit External Interrupt */ -#define SRSR_MEXT 0x02 /* Modem External Interrupt */ - - -/* Service Request Configuration Register */ - -#define SRCR_PKGTYPE 0x80 -#define SRCR_REGACKEN 0x40 -#define SRCR_DAISYEN 0x20 -#define SRCR_GLOBPRI 0x10 -#define SRCR_UNFAIR 0x08 -#define SRCR_AUTOPRI 0x02 -#define SRCR_PRISEL 0x01 - -/* Values for register-based Interrupt ACKs */ -#define CD180_ACK_MINT 0x75 /* goes to MSMR */ -#define CD180_ACK_TINT 0x76 /* goes to TSMR */ -#define CD180_ACK_RINT 0x77 /* goes to RSMR */ - -/* Escape characters */ - -#define CD180_C_ESC 0x00 /* Escape character */ -#define CD180_C_SBRK 0x81 /* Start sending BREAK */ -#define CD180_C_DELAY 0x82 /* Delay output */ -#define CD180_C_EBRK 0x83 /* Stop sending BREAK */ diff --git a/drivers/sbus/char/uctrl.c b/drivers/sbus/char/uctrl.c index 45cf5bc0bbe..44d2ef906ac 100644 --- a/drivers/sbus/char/uctrl.c +++ b/drivers/sbus/char/uctrl.c @@ -364,6 +364,7 @@ static int __init ts102_uctrl_init(void) struct linux_prom_irqs tmp_irq[2]; unsigned int vaddr[2] = { 0, 0 }; int tmpnode, uctrlnode = prom_getchild(prom_root_node); + int err; tmpnode = prom_searchsiblings(uctrlnode, "obio"); @@ -389,7 +390,12 @@ static int __init ts102_uctrl_init(void) if(!driver->irq) driver->irq = tmp_irq[0].pri; - request_irq(driver->irq, uctrl_interrupt, 0, "uctrl", driver); + err = request_irq(driver->irq, uctrl_interrupt, 0, "uctrl", driver); + if (err) { + printk("%s: unable to register irq %d\n", + __FUNCTION__, driver->irq); + return err; + } if (misc_register(&uctrl_dev)) { printk("%s: unable to get misc minor %d\n", |