aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/aic7xxx/aic79xx.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/aic7xxx/aic79xx.h')
-rw-r--r--drivers/scsi/aic7xxx/aic79xx.h1537
1 files changed, 1537 insertions, 0 deletions
diff --git a/drivers/scsi/aic7xxx/aic79xx.h b/drivers/scsi/aic7xxx/aic79xx.h
new file mode 100644
index 00000000000..fd4b2f3eb0c
--- /dev/null
+++ b/drivers/scsi/aic7xxx/aic79xx.h
@@ -0,0 +1,1537 @@
+/*
+ * Core definitions and data structures shareable across OS platforms.
+ *
+ * Copyright (c) 1994-2002 Justin T. Gibbs.
+ * Copyright (c) 2000-2002 Adaptec Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ * $Id: //depot/aic7xxx/aic7xxx/aic79xx.h#95 $
+ *
+ * $FreeBSD$
+ */
+
+#ifndef _AIC79XX_H_
+#define _AIC79XX_H_
+
+/* Register Definitions */
+#include "aic79xx_reg.h"
+
+/************************* Forward Declarations *******************************/
+struct ahd_platform_data;
+struct scb_platform_data;
+
+/****************************** Useful Macros *********************************/
+#ifndef MAX
+#define MAX(a,b) (((a) > (b)) ? (a) : (b))
+#endif
+
+#ifndef MIN
+#define MIN(a,b) (((a) < (b)) ? (a) : (b))
+#endif
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#define NUM_ELEMENTS(array) (sizeof(array) / sizeof(*array))
+
+#define ALL_CHANNELS '\0'
+#define ALL_TARGETS_MASK 0xFFFF
+#define INITIATOR_WILDCARD (~0)
+#define SCB_LIST_NULL 0xFF00
+#define SCB_LIST_NULL_LE (ahd_htole16(SCB_LIST_NULL))
+#define QOUTFIFO_ENTRY_VALID 0x8000
+#define QOUTFIFO_ENTRY_VALID_LE (ahd_htole16(0x8000))
+#define SCBID_IS_NULL(scbid) (((scbid) & 0xFF00 ) == SCB_LIST_NULL)
+
+#define SCSIID_TARGET(ahd, scsiid) \
+ (((scsiid) & TID) >> TID_SHIFT)
+#define SCSIID_OUR_ID(scsiid) \
+ ((scsiid) & OID)
+#define SCSIID_CHANNEL(ahd, scsiid) ('A')
+#define SCB_IS_SCSIBUS_B(ahd, scb) (0)
+#define SCB_GET_OUR_ID(scb) \
+ SCSIID_OUR_ID((scb)->hscb->scsiid)
+#define SCB_GET_TARGET(ahd, scb) \
+ SCSIID_TARGET((ahd), (scb)->hscb->scsiid)
+#define SCB_GET_CHANNEL(ahd, scb) \
+ SCSIID_CHANNEL(ahd, (scb)->hscb->scsiid)
+#define SCB_GET_LUN(scb) \
+ ((scb)->hscb->lun)
+#define SCB_GET_TARGET_OFFSET(ahd, scb) \
+ SCB_GET_TARGET(ahd, scb)
+#define SCB_GET_TARGET_MASK(ahd, scb) \
+ (0x01 << (SCB_GET_TARGET_OFFSET(ahd, scb)))
+#ifdef AHD_DEBUG
+#define SCB_IS_SILENT(scb) \
+ ((ahd_debug & AHD_SHOW_MASKED_ERRORS) == 0 \
+ && (((scb)->flags & SCB_SILENT) != 0))
+#else
+#define SCB_IS_SILENT(scb) \
+ (((scb)->flags & SCB_SILENT) != 0)
+#endif
+/*
+ * TCLs have the following format: TTTTLLLLLLLL
+ */
+#define TCL_TARGET_OFFSET(tcl) \
+ ((((tcl) >> 4) & TID) >> 4)
+#define TCL_LUN(tcl) \
+ (tcl & (AHD_NUM_LUNS - 1))
+#define BUILD_TCL(scsiid, lun) \
+ ((lun) | (((scsiid) & TID) << 4))
+#define BUILD_TCL_RAW(target, channel, lun) \
+ ((lun) | ((target) << 8))
+
+#define SCB_GET_TAG(scb) \
+ ahd_le16toh(scb->hscb->tag)
+
+#ifndef AHD_TARGET_MODE
+#undef AHD_TMODE_ENABLE
+#define AHD_TMODE_ENABLE 0
+#endif
+
+#define AHD_BUILD_COL_IDX(target, lun) \
+ (((lun) << 4) | target)
+
+#define AHD_GET_SCB_COL_IDX(ahd, scb) \
+ ((SCB_GET_LUN(scb) << 4) | SCB_GET_TARGET(ahd, scb))
+
+#define AHD_SET_SCB_COL_IDX(scb, col_idx) \
+do { \
+ (scb)->hscb->scsiid = ((col_idx) << TID_SHIFT) & TID; \
+ (scb)->hscb->lun = ((col_idx) >> 4) & (AHD_NUM_LUNS_NONPKT-1); \
+} while (0)
+
+#define AHD_COPY_SCB_COL_IDX(dst, src) \
+do { \
+ dst->hscb->scsiid = src->hscb->scsiid; \
+ dst->hscb->lun = src->hscb->lun; \
+} while (0)
+
+#define AHD_NEVER_COL_IDX 0xFFFF
+
+/**************************** Driver Constants ********************************/
+/*
+ * The maximum number of supported targets.
+ */
+#define AHD_NUM_TARGETS 16
+
+/*
+ * The maximum number of supported luns.
+ * The identify message only supports 64 luns in non-packetized transfers.
+ * You can have 2^64 luns when information unit transfers are enabled,
+ * but until we see a need to support that many, we support 256.
+ */
+#define AHD_NUM_LUNS_NONPKT 64
+#define AHD_NUM_LUNS 256
+
+/*
+ * The maximum transfer per S/G segment.
+ */
+#define AHD_MAXTRANSFER_SIZE 0x00ffffff /* limited by 24bit counter */
+
+/*
+ * The maximum amount of SCB storage in hardware on a controller.
+ * This value represents an upper bound. Due to software design,
+ * we may not be able to use this number.
+ */
+#define AHD_SCB_MAX 512
+
+/*
+ * The maximum number of concurrent transactions supported per driver instance.
+ * Sequencer Control Blocks (SCBs) store per-transaction information.
+ */
+#define AHD_MAX_QUEUE AHD_SCB_MAX
+
+/*
+ * Define the size of our QIN and QOUT FIFOs. They must be a power of 2
+ * in size and accommodate as many transactions as can be queued concurrently.
+ */
+#define AHD_QIN_SIZE AHD_MAX_QUEUE
+#define AHD_QOUT_SIZE AHD_MAX_QUEUE
+
+#define AHD_QIN_WRAP(x) ((x) & (AHD_QIN_SIZE-1))
+/*
+ * The maximum amount of SCB storage we allocate in host memory.
+ */
+#define AHD_SCB_MAX_ALLOC AHD_MAX_QUEUE
+
+/*
+ * Ring Buffer of incoming target commands.
+ * We allocate 256 to simplify the logic in the sequencer
+ * by using the natural wrap point of an 8bit counter.
+ */
+#define AHD_TMODE_CMDS 256
+
+/* Reset line assertion time in us */
+#define AHD_BUSRESET_DELAY 25
+
+/******************* Chip Characteristics/Operating Settings *****************/
+/*
+ * Chip Type
+ * The chip order is from least sophisticated to most sophisticated.
+ */
+typedef enum {
+ AHD_NONE = 0x0000,
+ AHD_CHIPID_MASK = 0x00FF,
+ AHD_AIC7901 = 0x0001,
+ AHD_AIC7902 = 0x0002,
+ AHD_AIC7901A = 0x0003,
+ AHD_PCI = 0x0100, /* Bus type PCI */
+ AHD_PCIX = 0x0200, /* Bus type PCIX */
+ AHD_BUS_MASK = 0x0F00
+} ahd_chip;
+
+/*
+ * Features available in each chip type.
+ */
+typedef enum {
+ AHD_FENONE = 0x00000,
+ AHD_WIDE = 0x00001,/* Wide Channel */
+ AHD_MULTI_FUNC = 0x00100,/* Multi-Function/Channel Device */
+ AHD_TARGETMODE = 0x01000,/* Has tested target mode support */
+ AHD_MULTIROLE = 0x02000,/* Space for two roles at a time */
+ AHD_RTI = 0x04000,/* Retained Training Support */
+ AHD_NEW_IOCELL_OPTS = 0x08000,/* More Signal knobs in the IOCELL */
+ AHD_NEW_DFCNTRL_OPTS = 0x10000,/* SCSIENWRDIS bit */
+ AHD_FAST_CDB_DELIVERY = 0x20000,/* CDB acks released to Output Sync */
+ AHD_REMOVABLE = 0x00000,/* Hot-Swap supported - None so far*/
+ AHD_AIC7901_FE = AHD_FENONE,
+ AHD_AIC7901A_FE = AHD_FENONE,
+ AHD_AIC7902_FE = AHD_MULTI_FUNC
+} ahd_feature;
+
+/*
+ * Bugs in the silicon that we work around in software.
+ */
+typedef enum {
+ AHD_BUGNONE = 0x0000,
+ /*
+ * Rev A hardware fails to update LAST/CURR/NEXTSCB
+ * correctly in certain packetized selection cases.
+ */
+ AHD_SENT_SCB_UPDATE_BUG = 0x0001,
+ /* The wrong SCB is accessed to check the abort pending bit. */
+ AHD_ABORT_LQI_BUG = 0x0002,
+ /* Packetized bitbucket crosses packet boundaries. */
+ AHD_PKT_BITBUCKET_BUG = 0x0004,
+ /* The selection timer runs twice as long as its setting. */
+ AHD_LONG_SETIMO_BUG = 0x0008,
+ /* The Non-LQ CRC error status is delayed until phase change. */
+ AHD_NLQICRC_DELAYED_BUG = 0x0010,
+ /* The chip must be reset for all outgoing bus resets. */
+ AHD_SCSIRST_BUG = 0x0020,
+ /* Some PCIX fields must be saved and restored across chip reset. */
+ AHD_PCIX_CHIPRST_BUG = 0x0040,
+ /* MMAPIO is not functional in PCI-X mode. */
+ AHD_PCIX_MMAPIO_BUG = 0x0080,
+ /* Reads to SCBRAM fail to reset the discard timer. */
+ AHD_PCIX_SCBRAM_RD_BUG = 0x0100,
+ /* Bug workarounds that can be disabled on non-PCIX busses. */
+ AHD_PCIX_BUG_MASK = AHD_PCIX_CHIPRST_BUG
+ | AHD_PCIX_MMAPIO_BUG
+ | AHD_PCIX_SCBRAM_RD_BUG,
+ /*
+ * LQOSTOP0 status set even for forced selections with ATN
+ * to perform non-packetized message delivery.
+ */
+ AHD_LQO_ATNO_BUG = 0x0200,
+ /* FIFO auto-flush does not always trigger. */
+ AHD_AUTOFLUSH_BUG = 0x0400,
+ /* The CLRLQO registers are not self-clearing. */
+ AHD_CLRLQO_AUTOCLR_BUG = 0x0800,
+ /* The PACKETIZED status bit refers to the previous connection. */
+ AHD_PKTIZED_STATUS_BUG = 0x1000,
+ /* "Short Luns" are not placed into outgoing LQ packets correctly. */
+ AHD_PKT_LUN_BUG = 0x2000,
+ /*
+ * Only the FIFO allocated to the non-packetized connection may
+ * be in use during a non-packetzied connection.
+ */
+ AHD_NONPACKFIFO_BUG = 0x4000,
+ /*
+ * Writing to a DFF SCBPTR register may fail if concurent with
+ * a hardware write to the other DFF SCBPTR register. This is
+ * not currently a concern in our sequencer since all chips with
+ * this bug have the AHD_NONPACKFIFO_BUG and all writes of concern
+ * occur in non-packetized connections.
+ */
+ AHD_MDFF_WSCBPTR_BUG = 0x8000,
+ /* SGHADDR updates are slow. */
+ AHD_REG_SLOW_SETTLE_BUG = 0x10000,
+ /*
+ * Changing the MODE_PTR coincident with an interrupt that
+ * switches to a different mode will cause the interrupt to
+ * be in the mode written outside of interrupt context.
+ */
+ AHD_SET_MODE_BUG = 0x20000,
+ /* Non-packetized busfree revision does not work. */
+ AHD_BUSFREEREV_BUG = 0x40000,
+ /*
+ * Paced transfers are indicated with a non-standard PPR
+ * option bit in the neg table, 160MHz is indicated by
+ * sync factor 0x7, and the offset if off by a factor of 2.
+ */
+ AHD_PACED_NEGTABLE_BUG = 0x80000,
+ /* LQOOVERRUN false positives. */
+ AHD_LQOOVERRUN_BUG = 0x100000,
+ /*
+ * Controller write to INTSTAT will lose to a host
+ * write to CLRINT.
+ */
+ AHD_INTCOLLISION_BUG = 0x200000,
+ /*
+ * The GEM318 violates the SCSI spec by not waiting
+ * the mandated bus settle delay between phase changes
+ * in some situations. Some aic79xx chip revs. are more
+ * strict in this regard and will treat REQ assertions
+ * that fall within the bus settle delay window as
+ * glitches. This flag tells the firmware to tolerate
+ * early REQ assertions.
+ */
+ AHD_EARLY_REQ_BUG = 0x400000,
+ /*
+ * The LED does not stay on long enough in packetized modes.
+ */
+ AHD_FAINT_LED_BUG = 0x800000
+} ahd_bug;
+
+/*
+ * Configuration specific settings.
+ * The driver determines these settings by probing the
+ * chip/controller's configuration.
+ */
+typedef enum {
+ AHD_FNONE = 0x00000,
+ AHD_BOOT_CHANNEL = 0x00001,/* We were set as the boot channel. */
+ AHD_USEDEFAULTS = 0x00004,/*
+ * For cards without an seeprom
+ * or a BIOS to initialize the chip's
+ * SRAM, we use the default target
+ * settings.
+ */
+ AHD_SEQUENCER_DEBUG = 0x00008,
+ AHD_RESET_BUS_A = 0x00010,
+ AHD_EXTENDED_TRANS_A = 0x00020,
+ AHD_TERM_ENB_A = 0x00040,
+ AHD_SPCHK_ENB_A = 0x00080,
+ AHD_STPWLEVEL_A = 0x00100,
+ AHD_INITIATORROLE = 0x00200,/*
+ * Allow initiator operations on
+ * this controller.
+ */
+ AHD_TARGETROLE = 0x00400,/*
+ * Allow target operations on this
+ * controller.
+ */
+ AHD_RESOURCE_SHORTAGE = 0x00800,
+ AHD_TQINFIFO_BLOCKED = 0x01000,/* Blocked waiting for ATIOs */
+ AHD_INT50_SPEEDFLEX = 0x02000,/*
+ * Internal 50pin connector
+ * sits behind an aic3860
+ */
+ AHD_BIOS_ENABLED = 0x04000,
+ AHD_ALL_INTERRUPTS = 0x08000,
+ AHD_39BIT_ADDRESSING = 0x10000,/* Use 39 bit addressing scheme. */
+ AHD_64BIT_ADDRESSING = 0x20000,/* Use 64 bit addressing scheme. */
+ AHD_CURRENT_SENSING = 0x40000,
+ AHD_SCB_CONFIG_USED = 0x80000,/* No SEEPROM but SCB had info. */
+ AHD_HP_BOARD = 0x100000,
+ AHD_RESET_POLL_ACTIVE = 0x200000,
+ AHD_UPDATE_PEND_CMDS = 0x400000,
+ AHD_RUNNING_QOUTFIFO = 0x800000,
+ AHD_HAD_FIRST_SEL = 0x1000000
+} ahd_flag;
+
+/************************* Hardware SCB Definition ***************************/
+
+/*
+ * The driver keeps up to MAX_SCB scb structures per card in memory. The SCB
+ * consists of a "hardware SCB" mirroring the fields available on the card
+ * and additional information the kernel stores for each transaction.
+ *
+ * To minimize space utilization, a portion of the hardware scb stores
+ * different data during different portions of a SCSI transaction.
+ * As initialized by the host driver for the initiator role, this area
+ * contains the SCSI cdb (or a pointer to the cdb) to be executed. After
+ * the cdb has been presented to the target, this area serves to store
+ * residual transfer information and the SCSI status byte.
+ * For the target role, the contents of this area do not change, but
+ * still serve a different purpose than for the initiator role. See
+ * struct target_data for details.
+ */
+
+/*
+ * Status information embedded in the shared poriton of
+ * an SCB after passing the cdb to the target. The kernel
+ * driver will only read this data for transactions that
+ * complete abnormally.
+ */
+struct initiator_status {
+ uint32_t residual_datacnt; /* Residual in the current S/G seg */
+ uint32_t residual_sgptr; /* The next S/G for this transfer */
+ uint8_t scsi_status; /* Standard SCSI status byte */
+};
+
+struct target_status {
+ uint32_t residual_datacnt; /* Residual in the current S/G seg */
+ uint32_t residual_sgptr; /* The next S/G for this transfer */
+ uint8_t scsi_status; /* SCSI status to give to initiator */
+ uint8_t target_phases; /* Bitmap of phases to execute */
+ uint8_t data_phase; /* Data-In or Data-Out */
+ uint8_t initiator_tag; /* Initiator's transaction tag */
+};
+
+/*
+ * Initiator mode SCB shared data area.
+ * If the embedded CDB is 12 bytes or less, we embed
+ * the sense buffer address in the SCB. This allows
+ * us to retrieve sense information without interrupting
+ * the host in packetized mode.
+ */
+typedef uint32_t sense_addr_t;
+#define MAX_CDB_LEN 16
+#define MAX_CDB_LEN_WITH_SENSE_ADDR (MAX_CDB_LEN - sizeof(sense_addr_t))
+union initiator_data {
+ struct {
+ uint64_t cdbptr;
+ uint8_t cdblen;
+ } cdb_from_host;
+ uint8_t cdb[MAX_CDB_LEN];
+ struct {
+ uint8_t cdb[MAX_CDB_LEN_WITH_SENSE_ADDR];
+ sense_addr_t sense_addr;
+ } cdb_plus_saddr;
+};
+
+/*
+ * Target mode version of the shared data SCB segment.
+ */
+struct target_data {
+ uint32_t spare[2];
+ uint8_t scsi_status; /* SCSI status to give to initiator */
+ uint8_t target_phases; /* Bitmap of phases to execute */
+ uint8_t data_phase; /* Data-In or Data-Out */
+ uint8_t initiator_tag; /* Initiator's transaction tag */
+};
+
+struct hardware_scb {
+/*0*/ union {
+ union initiator_data idata;
+ struct target_data tdata;
+ struct initiator_status istatus;
+ struct target_status tstatus;
+ } shared_data;
+/*
+ * A word about residuals.
+ * The scb is presented to the sequencer with the dataptr and datacnt
+ * fields initialized to the contents of the first S/G element to
+ * transfer. The sgptr field is initialized to the bus address for
+ * the S/G element that follows the first in the in core S/G array
+ * or'ed with the SG_FULL_RESID flag. Sgptr may point to an invalid
+ * S/G entry for this transfer (single S/G element transfer with the
+ * first elements address and length preloaded in the dataptr/datacnt
+ * fields). If no transfer is to occur, sgptr is set to SG_LIST_NULL.
+ * The SG_FULL_RESID flag ensures that the residual will be correctly
+ * noted even if no data transfers occur. Once the data phase is entered,
+ * the residual sgptr and datacnt are loaded from the sgptr and the
+ * datacnt fields. After each S/G element's dataptr and length are
+ * loaded into the hardware, the residual sgptr is advanced. After
+ * each S/G element is expired, its datacnt field is checked to see
+ * if the LAST_SEG flag is set. If so, SG_LIST_NULL is set in the
+ * residual sg ptr and the transfer is considered complete. If the
+ * sequencer determines that there is a residual in the tranfer, or
+ * there is non-zero status, it will set the SG_STATUS_VALID flag in
+ * sgptr and dma the scb back into host memory. To sumarize:
+ *
+ * Sequencer:
+ * o A residual has occurred if SG_FULL_RESID is set in sgptr,
+ * or residual_sgptr does not have SG_LIST_NULL set.
+ *
+ * o We are transfering the last segment if residual_datacnt has
+ * the SG_LAST_SEG flag set.
+ *
+ * Host:
+ * o A residual can only have occurred if a completed scb has the
+ * SG_STATUS_VALID flag set. Inspection of the SCSI status field,
+ * the residual_datacnt, and the residual_sgptr field will tell
+ * for sure.
+ *
+ * o residual_sgptr and sgptr refer to the "next" sg entry
+ * and so may point beyond the last valid sg entry for the
+ * transfer.
+ */
+#define SG_PTR_MASK 0xFFFFFFF8
+/*16*/ uint16_t tag; /* Reused by Sequencer. */
+/*18*/ uint8_t control; /* See SCB_CONTROL in aic79xx.reg for details */
+/*19*/ uint8_t scsiid; /*
+ * Selection out Id
+ * Our Id (bits 0-3) Their ID (bits 4-7)
+ */
+/*20*/ uint8_t lun;
+/*21*/ uint8_t task_attribute;
+/*22*/ uint8_t cdb_len;
+/*23*/ uint8_t task_management;
+/*24*/ uint64_t dataptr;
+/*32*/ uint32_t datacnt; /* Byte 3 is spare. */
+/*36*/ uint32_t sgptr;
+/*40*/ uint32_t hscb_busaddr;
+/*44*/ uint32_t next_hscb_busaddr;
+/********** Long lun field only downloaded for full 8 byte lun support ********/
+/*48*/ uint8_t pkt_long_lun[8];
+/******* Fields below are not Downloaded (Sequencer may use for scratch) ******/
+/*56*/ uint8_t spare[8];
+};
+
+/************************ Kernel SCB Definitions ******************************/
+/*
+ * Some fields of the SCB are OS dependent. Here we collect the
+ * definitions for elements that all OS platforms need to include
+ * in there SCB definition.
+ */
+
+/*
+ * Definition of a scatter/gather element as transfered to the controller.
+ * The aic7xxx chips only support a 24bit length. We use the top byte of
+ * the length to store additional address bits and a flag to indicate
+ * that a given segment terminates the transfer. This gives us an
+ * addressable range of 512GB on machines with 64bit PCI or with chips
+ * that can support dual address cycles on 32bit PCI busses.
+ */
+struct ahd_dma_seg {
+ uint32_t addr;
+ uint32_t len;
+#define AHD_DMA_LAST_SEG 0x80000000
+#define AHD_SG_HIGH_ADDR_MASK 0x7F000000
+#define AHD_SG_LEN_MASK 0x00FFFFFF
+};
+
+struct ahd_dma64_seg {
+ uint64_t addr;
+ uint32_t len;
+ uint32_t pad;
+};
+
+struct map_node {
+ bus_dmamap_t dmamap;
+ dma_addr_t physaddr;
+ uint8_t *vaddr;
+ SLIST_ENTRY(map_node) links;
+};
+
+/*
+ * The current state of this SCB.
+ */
+typedef enum {
+ SCB_FLAG_NONE = 0x00000,
+ SCB_TRANSMISSION_ERROR = 0x00001,/*
+ * We detected a parity or CRC
+ * error that has effected the
+ * payload of the command. This
+ * flag is checked when normal
+ * status is returned to catch
+ * the case of a target not
+ * responding to our attempt
+ * to report the error.
+ */
+ SCB_OTHERTCL_TIMEOUT = 0x00002,/*
+ * Another device was active
+ * during the first timeout for
+ * this SCB so we gave ourselves
+ * an additional timeout period
+ * in case it was hogging the
+ * bus.
+ */
+ SCB_DEVICE_RESET = 0x00004,
+ SCB_SENSE = 0x00008,
+ SCB_CDB32_PTR = 0x00010,
+ SCB_RECOVERY_SCB = 0x00020,
+ SCB_AUTO_NEGOTIATE = 0x00040,/* Negotiate to achieve goal. */
+ SCB_NEGOTIATE = 0x00080,/* Negotiation forced for command. */
+ SCB_ABORT = 0x00100,
+ SCB_ACTIVE = 0x00200,
+ SCB_TARGET_IMMEDIATE = 0x00400,
+ SCB_PACKETIZED = 0x00800,
+ SCB_EXPECT_PPR_BUSFREE = 0x01000,
+ SCB_PKT_SENSE = 0x02000,
+ SCB_CMDPHASE_ABORT = 0x04000,
+ SCB_ON_COL_LIST = 0x08000,
+ SCB_SILENT = 0x10000 /*
+ * Be quiet about transmission type
+ * errors. They are expected and we
+ * don't want to upset the user. This
+ * flag is typically used during DV.
+ */
+} scb_flag;
+
+struct scb {
+ struct hardware_scb *hscb;
+ union {
+ SLIST_ENTRY(scb) sle;
+ LIST_ENTRY(scb) le;
+ TAILQ_ENTRY(scb) tqe;
+ } links;
+ union {
+ SLIST_ENTRY(scb) sle;
+ LIST_ENTRY(scb) le;
+ TAILQ_ENTRY(scb) tqe;
+ } links2;
+#define pending_links links2.le
+#define collision_links links2.le
+ struct scb *col_scb;
+ ahd_io_ctx_t io_ctx;
+ struct ahd_softc *ahd_softc;
+ scb_flag flags;
+#ifndef __linux__
+ bus_dmamap_t dmamap;
+#endif
+ struct scb_platform_data *platform_data;
+ struct map_node *hscb_map;
+ struct map_node *sg_map;
+ struct map_node *sense_map;
+ void *sg_list;
+ uint8_t *sense_data;
+ dma_addr_t sg_list_busaddr;
+ dma_addr_t sense_busaddr;
+ u_int sg_count;/* How full ahd_dma_seg is */
+#define AHD_MAX_LQ_CRC_ERRORS 5
+ u_int crc_retry_count;
+};
+
+TAILQ_HEAD(scb_tailq, scb);
+LIST_HEAD(scb_list, scb);
+
+struct scb_data {
+ /*
+ * TAILQ of lists of free SCBs grouped by device
+ * collision domains.
+ */
+ struct scb_tailq free_scbs;
+
+ /*
+ * Per-device lists of SCBs whose tag ID would collide
+ * with an already active tag on the device.
+ */
+ struct scb_list free_scb_lists[AHD_NUM_TARGETS * AHD_NUM_LUNS_NONPKT];
+
+ /*
+ * SCBs that will not collide with any active device.
+ */
+ struct scb_list any_dev_free_scb_list;
+
+ /*
+ * Mapping from tag to SCB.
+ */
+ struct scb *scbindex[AHD_SCB_MAX];
+
+ /*
+ * "Bus" addresses of our data structures.
+ */
+ bus_dma_tag_t hscb_dmat; /* dmat for our hardware SCB array */
+ bus_dma_tag_t sg_dmat; /* dmat for our sg segments */
+ bus_dma_tag_t sense_dmat; /* dmat for our sense buffers */
+ SLIST_HEAD(, map_node) hscb_maps;
+ SLIST_HEAD(, map_node) sg_maps;
+ SLIST_HEAD(, map_node) sense_maps;
+ int scbs_left; /* unallocated scbs in head map_node */
+ int sgs_left; /* unallocated sgs in head map_node */
+ int sense_left; /* unallocated sense in head map_node */
+ uint16_t numscbs;
+ uint16_t maxhscbs; /* Number of SCBs on the card */
+ uint8_t init_level; /*
+ * How far we've initialized
+ * this structure.
+ */
+};
+
+/************************ Target Mode Definitions *****************************/
+
+/*
+ * Connection desciptor for select-in requests in target mode.
+ */
+struct target_cmd {
+ uint8_t scsiid; /* Our ID and the initiator's ID */
+ uint8_t identify; /* Identify message */
+ uint8_t bytes[22]; /*
+ * Bytes contains any additional message
+ * bytes terminated by 0xFF. The remainder
+ * is the cdb to execute.
+ */
+ uint8_t cmd_valid; /*
+ * When a command is complete, the firmware
+ * will set cmd_valid to all bits set.
+ * After the host has seen the command,
+ * the bits are cleared. This allows us
+ * to just peek at host memory to determine
+ * if more work is complete. cmd_valid is on
+ * an 8 byte boundary to simplify setting
+ * it on aic7880 hardware which only has
+ * limited direct access to the DMA FIFO.
+ */
+ uint8_t pad[7];
+};
+
+/*
+ * Number of events we can buffer up if we run out
+ * of immediate notify ccbs.
+ */
+#define AHD_TMODE_EVENT_BUFFER_SIZE 8
+struct ahd_tmode_event {
+ uint8_t initiator_id;
+ uint8_t event_type; /* MSG type or EVENT_TYPE_BUS_RESET */
+#define EVENT_TYPE_BUS_RESET 0xFF
+ uint8_t event_arg;
+};
+
+/*
+ * Per enabled lun target mode state.
+ * As this state is directly influenced by the host OS'es target mode
+ * environment, we let the OS module define it. Forward declare the
+ * structure here so we can store arrays of them, etc. in OS neutral
+ * data structures.
+ */
+#ifdef AHD_TARGET_MODE
+struct ahd_tmode_lstate {
+ struct cam_path *path;
+ struct ccb_hdr_slist accept_tios;
+ struct ccb_hdr_slist immed_notifies;
+ struct ahd_tmode_event event_buffer[AHD_TMODE_EVENT_BUFFER_SIZE];
+ uint8_t event_r_idx;
+ uint8_t event_w_idx;
+};
+#else
+struct ahd_tmode_lstate;
+#endif
+
+/******************** Transfer Negotiation Datastructures *********************/
+#define AHD_TRANS_CUR 0x01 /* Modify current neogtiation status */
+#define AHD_TRANS_ACTIVE 0x03 /* Assume this target is on the bus */
+#define AHD_TRANS_GOAL 0x04 /* Modify negotiation goal */
+#define AHD_TRANS_USER 0x08 /* Modify user negotiation settings */
+#define AHD_PERIOD_10MHz 0x19
+
+#define AHD_WIDTH_UNKNOWN 0xFF
+#define AHD_PERIOD_UNKNOWN 0xFF
+#define AHD_OFFSET_UNKNOWN 0xFF
+#define AHD_PPR_OPTS_UNKNOWN 0xFF
+
+/*
+ * Transfer Negotiation Information.
+ */
+struct ahd_transinfo {
+ uint8_t protocol_version; /* SCSI Revision level */
+ uint8_t transport_version; /* SPI Revision level */
+ uint8_t width; /* Bus width */
+ uint8_t period; /* Sync rate factor */
+ uint8_t offset; /* Sync offset */
+ uint8_t ppr_options; /* Parallel Protocol Request options */
+};
+
+/*
+ * Per-initiator current, goal and user transfer negotiation information. */
+struct ahd_initiator_tinfo {
+ struct ahd_transinfo curr;
+ struct ahd_transinfo goal;
+ struct ahd_transinfo user;
+};
+
+/*
+ * Per enabled target ID state.
+ * Pointers to lun target state as well as sync/wide negotiation information
+ * for each initiator<->target mapping. For the initiator role we pretend
+ * that we are the target and the targets are the initiators since the
+ * negotiation is the same regardless of role.
+ */
+struct ahd_tmode_tstate {
+ struct ahd_tmode_lstate* enabled_luns[AHD_NUM_LUNS];
+ struct ahd_initiator_tinfo transinfo[AHD_NUM_TARGETS];
+
+ /*
+ * Per initiator state bitmasks.
+ */
+ uint16_t auto_negotiate;/* Auto Negotiation Required */
+ uint16_t discenable; /* Disconnection allowed */
+ uint16_t tagenable; /* Tagged Queuing allowed */
+};
+
+/*
+ * Points of interest along the negotiated transfer scale.
+ */
+#define AHD_SYNCRATE_160 0x8
+#define AHD_SYNCRATE_PACED 0x8
+#define AHD_SYNCRATE_DT 0x9
+#define AHD_SYNCRATE_ULTRA2 0xa
+#define AHD_SYNCRATE_ULTRA 0xc
+#define AHD_SYNCRATE_FAST 0x19
+#define AHD_SYNCRATE_MIN_DT AHD_SYNCRATE_FAST
+#define AHD_SYNCRATE_SYNC 0x32
+#define AHD_SYNCRATE_MIN 0x60
+#define AHD_SYNCRATE_ASYNC 0xFF
+#define AHD_SYNCRATE_MAX AHD_SYNCRATE_160
+
+/* Safe and valid period for async negotiations. */
+#define AHD_ASYNC_XFER_PERIOD 0x44
+
+/*
+ * In RevA, the synctable uses a 120MHz rate for the period
+ * factor 8 and 160MHz for the period factor 7. The 120MHz
+ * rate never made it into the official SCSI spec, so we must
+ * compensate when setting the negotiation table for Rev A
+ * parts.
+ */
+#define AHD_SYNCRATE_REVA_120 0x8
+#define AHD_SYNCRATE_REVA_160 0x7
+
+/***************************** Lookup Tables **********************************/
+/*
+ * Phase -> name and message out response
+ * to parity errors in each phase table.
+ */
+struct ahd_phase_table_entry {
+ uint8_t phase;
+ uint8_t mesg_out; /* Message response to parity errors */
+ char *phasemsg;
+};
+
+/************************** Serial EEPROM Format ******************************/
+
+struct seeprom_config {
+/*
+ * Per SCSI ID Configuration Flags
+ */
+ uint16_t device_flags[16]; /* words 0-15 */
+#define CFXFER 0x003F /* synchronous transfer rate */
+#define CFXFER_ASYNC 0x3F
+#define CFQAS 0x0040 /* Negotiate QAS */
+#define CFPACKETIZED 0x0080 /* Negotiate Packetized Transfers */
+#define CFSTART 0x0100 /* send start unit SCSI command */
+#define CFINCBIOS 0x0200 /* include in BIOS scan */
+#define CFDISC 0x0400 /* enable disconnection */
+#define CFMULTILUNDEV 0x0800 /* Probe multiple luns in BIOS scan */
+#define CFWIDEB 0x1000 /* wide bus device */
+#define CFHOSTMANAGED 0x8000 /* Managed by a RAID controller */
+
+/*
+ * BIOS Control Bits
+ */
+ uint16_t bios_control; /* word 16 */
+#define CFSUPREM 0x0001 /* support all removeable drives */
+#define CFSUPREMB 0x0002 /* support removeable boot drives */
+#define CFBIOSSTATE 0x000C /* BIOS Action State */
+#define CFBS_DISABLED 0x00
+#define CFBS_ENABLED 0x04
+#define CFBS_DISABLED_SCAN 0x08
+#define CFENABLEDV 0x0010 /* Perform Domain Validation */
+#define CFCTRL_A 0x0020 /* BIOS displays Ctrl-A message */
+#define CFSPARITY 0x0040 /* SCSI parity */
+#define CFEXTEND 0x0080 /* extended translation enabled */
+#define CFBOOTCD 0x0100 /* Support Bootable CD-ROM */
+#define CFMSG_LEVEL 0x0600 /* BIOS Message Level */
+#define CFMSG_VERBOSE 0x0000
+#define CFMSG_SILENT 0x0200
+#define CFMSG_DIAG 0x0400
+#define CFRESETB 0x0800 /* reset SCSI bus at boot */
+/* UNUSED 0xf000 */
+
+/*
+ * Host Adapter Control Bits
+ */
+ uint16_t adapter_control; /* word 17 */
+#define CFAUTOTERM 0x0001 /* Perform Auto termination */
+#define CFSTERM 0x0002 /* SCSI low byte termination */
+#define CFWSTERM 0x0004 /* SCSI high byte termination */
+#define CFSEAUTOTERM 0x0008 /* Ultra2 Perform secondary Auto Term*/
+#define CFSELOWTERM 0x0010 /* Ultra2 secondary low term */
+#define CFSEHIGHTERM 0x0020 /* Ultra2 secondary high term */
+#define CFSTPWLEVEL 0x0040 /* Termination level control */
+#define CFBIOSAUTOTERM 0x0080 /* Perform Auto termination */
+#define CFTERM_MENU 0x0100 /* BIOS displays termination menu */
+#define CFCLUSTERENB 0x8000 /* Cluster Enable */
+
+/*
+ * Bus Release Time, Host Adapter ID
+ */
+ uint16_t brtime_id; /* word 18 */
+#define CFSCSIID 0x000f /* host adapter SCSI ID */
+/* UNUSED 0x00f0 */
+#define CFBRTIME 0xff00 /* bus release time/PCI Latency Time */
+
+/*
+ * Maximum targets
+ */
+ uint16_t max_targets; /* word 19 */
+#define CFMAXTARG 0x00ff /* maximum targets */
+#define CFBOOTLUN 0x0f00 /* Lun to boot from */
+#define CFBOOTID 0xf000 /* Target to boot from */
+ uint16_t res_1[10]; /* words 20-29 */
+ uint16_t signature; /* BIOS Signature */
+#define CFSIGNATURE 0x400
+ uint16_t checksum; /* word 31 */
+};
+
+/*
+ * Vital Product Data used during POST and by the BIOS.
+ */
+struct vpd_config {
+ uint8_t bios_flags;
+#define VPDMASTERBIOS 0x0001
+#define VPDBOOTHOST 0x0002
+ uint8_t reserved_1[21];
+ uint8_t resource_type;
+ uint8_t resource_len[2];
+ uint8_t resource_data[8];
+ uint8_t vpd_tag;
+ uint16_t vpd_len;
+ uint8_t vpd_keyword[2];
+ uint8_t length;
+ uint8_t revision;
+ uint8_t device_flags;
+ uint8_t termnation_menus[2];
+ uint8_t fifo_threshold;
+ uint8_t end_tag;
+ uint8_t vpd_checksum;
+ uint16_t default_target_flags;
+ uint16_t default_bios_flags;
+ uint16_t default_ctrl_flags;
+ uint8_t default_irq;
+ uint8_t pci_lattime;
+ uint8_t max_target;
+ uint8_t boot_lun;
+ uint16_t signature;
+ uint8_t reserved_2;
+ uint8_t checksum;
+ uint8_t reserved_3[4];
+};
+
+/****************************** Flexport Logic ********************************/
+#define FLXADDR_TERMCTL 0x0
+#define FLX_TERMCTL_ENSECHIGH 0x8
+#define FLX_TERMCTL_ENSECLOW 0x4
+#define FLX_TERMCTL_ENPRIHIGH 0x2
+#define FLX_TERMCTL_ENPRILOW 0x1
+#define FLXADDR_ROMSTAT_CURSENSECTL 0x1
+#define FLX_ROMSTAT_SEECFG 0xF0
+#define FLX_ROMSTAT_EECFG 0x0F
+#define FLX_ROMSTAT_SEE_93C66 0x00
+#define FLX_ROMSTAT_SEE_NONE 0xF0
+#define FLX_ROMSTAT_EE_512x8 0x0
+#define FLX_ROMSTAT_EE_1MBx8 0x1
+#define FLX_ROMSTAT_EE_2MBx8 0x2
+#define FLX_ROMSTAT_EE_4MBx8 0x3
+#define FLX_ROMSTAT_EE_16MBx8 0x4
+#define CURSENSE_ENB 0x1
+#define FLXADDR_FLEXSTAT 0x2
+#define FLX_FSTAT_BUSY 0x1
+#define FLXADDR_CURRENT_STAT 0x4
+#define FLX_CSTAT_SEC_HIGH 0xC0
+#define FLX_CSTAT_SEC_LOW 0x30
+#define FLX_CSTAT_PRI_HIGH 0x0C
+#define FLX_CSTAT_PRI_LOW 0x03
+#define FLX_CSTAT_MASK 0x03
+#define FLX_CSTAT_SHIFT 2
+#define FLX_CSTAT_OKAY 0x0
+#define FLX_CSTAT_OVER 0x1
+#define FLX_CSTAT_UNDER 0x2
+#define FLX_CSTAT_INVALID 0x3
+
+int ahd_read_seeprom(struct ahd_softc *ahd, uint16_t *buf,
+ u_int start_addr, u_int count, int bstream);
+
+int ahd_write_seeprom(struct ahd_softc *ahd, uint16_t *buf,
+ u_int start_addr, u_int count);
+int ahd_wait_seeprom(struct ahd_softc *ahd);
+int ahd_verify_vpd_cksum(struct vpd_config *vpd);
+int ahd_verify_cksum(struct seeprom_config *sc);
+int ahd_acquire_seeprom(struct ahd_softc *ahd);
+void ahd_release_seeprom(struct ahd_softc *ahd);
+
+/**************************** Message Buffer *********************************/
+typedef enum {
+ MSG_FLAG_NONE = 0x00,
+ MSG_FLAG_EXPECT_PPR_BUSFREE = 0x01,
+ MSG_FLAG_IU_REQ_CHANGED = 0x02,
+ MSG_FLAG_EXPECT_IDE_BUSFREE = 0x04,
+ MSG_FLAG_EXPECT_QASREJ_BUSFREE = 0x08,
+ MSG_FLAG_PACKETIZED = 0x10
+} ahd_msg_flags;
+
+typedef enum {
+ MSG_TYPE_NONE = 0x00,
+ MSG_TYPE_INITIATOR_MSGOUT = 0x01,
+ MSG_TYPE_INITIATOR_MSGIN = 0x02,
+ MSG_TYPE_TARGET_MSGOUT = 0x03,
+ MSG_TYPE_TARGET_MSGIN = 0x04
+} ahd_msg_type;
+
+typedef enum {
+ MSGLOOP_IN_PROG,
+ MSGLOOP_MSGCOMPLETE,
+ MSGLOOP_TERMINATED
+} msg_loop_stat;
+
+/*********************** Software Configuration Structure *********************/
+struct ahd_suspend_channel_state {
+ uint8_t scsiseq;
+ uint8_t sxfrctl0;
+ uint8_t sxfrctl1;
+ uint8_t simode0;
+ uint8_t simode1;
+ uint8_t seltimer;
+ uint8_t seqctl;
+};
+
+struct ahd_suspend_state {
+ struct ahd_suspend_channel_state channel[2];
+ uint8_t optionmode;
+ uint8_t dscommand0;
+ uint8_t dspcistatus;
+ /* hsmailbox */
+ uint8_t crccontrol1;
+ uint8_t scbbaddr;
+ /* Host and sequencer SCB counts */
+ uint8_t dff_thrsh;
+ uint8_t *scratch_ram;
+ uint8_t *btt;
+};
+
+typedef void (*ahd_bus_intr_t)(struct ahd_softc *);
+
+typedef enum {
+ AHD_MODE_DFF0,
+ AHD_MODE_DFF1,
+ AHD_MODE_CCHAN,
+ AHD_MODE_SCSI,
+ AHD_MODE_CFG,
+ AHD_MODE_UNKNOWN
+} ahd_mode;
+
+#define AHD_MK_MSK(x) (0x01 << (x))
+#define AHD_MODE_DFF0_MSK AHD_MK_MSK(AHD_MODE_DFF0)
+#define AHD_MODE_DFF1_MSK AHD_MK_MSK(AHD_MODE_DFF1)
+#define AHD_MODE_CCHAN_MSK AHD_MK_MSK(AHD_MODE_CCHAN)
+#define AHD_MODE_SCSI_MSK AHD_MK_MSK(AHD_MODE_SCSI)
+#define AHD_MODE_CFG_MSK AHD_MK_MSK(AHD_MODE_CFG)
+#define AHD_MODE_UNKNOWN_MSK AHD_MK_MSK(AHD_MODE_UNKNOWN)
+#define AHD_MODE_ANY_MSK (~0)
+
+typedef uint8_t ahd_mode_state;
+
+typedef void ahd_callback_t (void *);
+
+struct ahd_softc {
+ bus_space_tag_t tags[2];
+ bus_space_handle_t bshs[2];
+#ifndef __linux__
+ bus_dma_tag_t buffer_dmat; /* dmat for buffer I/O */
+#endif
+ struct scb_data scb_data;
+
+ struct hardware_scb *next_queued_hscb;
+
+ /*
+ * SCBs that have been sent to the controller
+ */
+ LIST_HEAD(, scb) pending_scbs;
+
+ /*
+ * Current register window mode information.
+ */
+ ahd_mode dst_mode;
+ ahd_mode src_mode;
+
+ /*
+ * Saved register window mode information
+ * used for restore on next unpause.
+ */
+ ahd_mode saved_dst_mode;
+ ahd_mode saved_src_mode;
+
+ /*
+ * Platform specific data.
+ */
+ struct ahd_platform_data *platform_data;
+
+ /*
+ * Platform specific device information.
+ */
+ ahd_dev_softc_t dev_softc;
+
+ /*
+ * Bus specific device information.
+ */
+ ahd_bus_intr_t bus_intr;
+
+ /*
+ * Target mode related state kept on a per enabled lun basis.
+ * Targets that are not enabled will have null entries.
+ * As an initiator, we keep one target entry for our initiator
+ * ID to store our sync/wide transfer settings.
+ */
+ struct ahd_tmode_tstate *enabled_targets[AHD_NUM_TARGETS];
+
+ /*
+ * The black hole device responsible for handling requests for
+ * disabled luns on enabled targets.
+ */
+ struct ahd_tmode_lstate *black_hole;
+
+ /*
+ * Device instance currently on the bus awaiting a continue TIO
+ * for a command that was not given the disconnect priveledge.
+ */
+ struct ahd_tmode_lstate *pending_device;
+
+ /*
+ * Timer handles for timer driven callbacks.
+ */
+ ahd_timer_t reset_timer;
+ ahd_timer_t stat_timer;
+
+ /*
+ * Statistics.
+ */
+#define AHD_STAT_UPDATE_US 250000 /* 250ms */
+#define AHD_STAT_BUCKETS 4
+ u_int cmdcmplt_bucket;
+ uint32_t cmdcmplt_counts[AHD_STAT_BUCKETS];
+ uint32_t cmdcmplt_total;
+
+ /*
+ * Card characteristics
+ */
+ ahd_chip chip;
+ ahd_feature features;
+ ahd_bug bugs;
+ ahd_flag flags;
+ struct seeprom_config *seep_config;
+
+ /* Values to store in the SEQCTL register for pause and unpause */
+ uint8_t unpause;
+ uint8_t pause;
+
+ /* Command Queues */
+ uint16_t qoutfifonext;
+ uint16_t qoutfifonext_valid_tag;
+ uint16_t qinfifonext;
+ uint16_t qinfifo[AHD_SCB_MAX];
+ uint16_t *qoutfifo;
+
+ /* Critical Section Data */
+ struct cs *critical_sections;
+ u_int num_critical_sections;
+
+ /* Buffer for handling packetized bitbucket. */
+ uint8_t *overrun_buf;
+
+ /* Links for chaining softcs */
+ TAILQ_ENTRY(ahd_softc) links;
+
+ /* Channel Names ('A', 'B', etc.) */
+ char channel;
+
+ /* Initiator Bus ID */
+ uint8_t our_id;
+
+ /*
+ * Target incoming command FIFO.
+ */
+ struct target_cmd *targetcmds;
+ uint8_t tqinfifonext;
+
+ /*
+ * Cached verson of the hs_mailbox so we can avoid
+ * pausing the sequencer during mailbox updates.
+ */
+ uint8_t hs_mailbox;
+
+ /*
+ * Incoming and outgoing message handling.
+ */
+ uint8_t send_msg_perror;
+ ahd_msg_flags msg_flags;
+ ahd_msg_type msg_type;
+ uint8_t msgout_buf[12];/* Message we are sending */
+ uint8_t msgin_buf[12];/* Message we are receiving */
+ u_int msgout_len; /* Length of message to send */
+ u_int msgout_index; /* Current index in msgout */
+ u_int msgin_index; /* Current index in msgin */
+
+ /*
+ * Mapping information for data structures shared
+ * between the sequencer and kernel.
+ */
+ bus_dma_tag_t parent_dmat;
+ bus_dma_tag_t shared_data_dmat;
+ bus_dmamap_t shared_data_dmamap;
+ dma_addr_t shared_data_busaddr;
+
+ /* Information saved through suspend/resume cycles */
+ struct ahd_suspend_state suspend_state;
+
+ /* Number of enabled target mode device on this card */
+ u_int enabled_luns;
+
+ /* Initialization level of this data structure */
+ u_int init_level;
+
+ /* PCI cacheline size. */
+ u_int pci_cachesize;
+
+ /* IO Cell Parameters */
+ uint8_t iocell_opts[AHD_NUM_PER_DEV_ANNEXCOLS];
+
+ u_int stack_size;
+ uint16_t *saved_stack;
+
+ /* Per-Unit descriptive information */
+ const char *description;
+ const char *bus_description;
+ char *name;
+ int unit;
+
+ /* Selection Timer settings */
+ int seltime;
+
+ /*
+ * Interrupt coalescing settings.
+ */
+#define AHD_INT_COALESCING_TIMER_DEFAULT 250 /*us*/
+#define AHD_INT_COALESCING_MAXCMDS_DEFAULT 10
+#define AHD_INT_COALESCING_MAXCMDS_MAX 127
+#define AHD_INT_COALESCING_MINCMDS_DEFAULT 5
+#define AHD_INT_COALESCING_MINCMDS_MAX 127
+#define AHD_INT_COALESCING_THRESHOLD_DEFAULT 2000
+#define AHD_INT_COALESCING_STOP_THRESHOLD_DEFAULT 1000
+ u_int int_coalescing_timer;
+ u_int int_coalescing_maxcmds;
+ u_int int_coalescing_mincmds;
+ u_int int_coalescing_threshold;
+ u_int int_coalescing_stop_threshold;
+
+ uint16_t user_discenable;/* Disconnection allowed */
+ uint16_t user_tagenable;/* Tagged Queuing allowed */
+};
+
+TAILQ_HEAD(ahd_softc_tailq, ahd_softc);
+extern struct ahd_softc_tailq ahd_tailq;
+
+/*************************** IO Cell Configuration ****************************/
+#define AHD_PRECOMP_SLEW_INDEX \
+ (AHD_ANNEXCOL_PRECOMP_SLEW - AHD_ANNEXCOL_PER_DEV0)
+
+#define AHD_AMPLITUDE_INDEX \
+ (AHD_ANNEXCOL_AMPLITUDE - AHD_ANNEXCOL_PER_DEV0)
+
+#define AHD_SET_SLEWRATE(ahd, new_slew) \
+do { \
+ (ahd)->iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= ~AHD_SLEWRATE_MASK; \
+ (ahd)->iocell_opts[AHD_PRECOMP_SLEW_INDEX] |= \
+ (((new_slew) << AHD_SLEWRATE_SHIFT) & AHD_SLEWRATE_MASK); \
+} while (0)
+
+#define AHD_SET_PRECOMP(ahd, new_pcomp) \
+do { \
+ (ahd)->iocell_opts[AHD_PRECOMP_SLEW_INDEX] &= ~AHD_PRECOMP_MASK; \
+ (ahd)->iocell_opts[AHD_PRECOMP_SLEW_INDEX] |= \
+ (((new_pcomp) << AHD_PRECOMP_SHIFT) & AHD_PRECOMP_MASK); \
+} while (0)
+
+#define AHD_SET_AMPLITUDE(ahd, new_amp) \
+do { \
+ (ahd)->iocell_opts[AHD_AMPLITUDE_INDEX] &= ~AHD_AMPLITUDE_MASK; \
+ (ahd)->iocell_opts[AHD_AMPLITUDE_INDEX] |= \
+ (((new_amp) << AHD_AMPLITUDE_SHIFT) & AHD_AMPLITUDE_MASK); \
+} while (0)
+
+/************************ Active Device Information ***************************/
+typedef enum {
+ ROLE_UNKNOWN,
+ ROLE_INITIATOR,
+ ROLE_TARGET
+} role_t;
+
+struct ahd_devinfo {
+ int our_scsiid;
+ int target_offset;
+ uint16_t target_mask;
+ u_int target;
+ u_int lun;
+ char channel;
+ role_t role; /*
+ * Only guaranteed to be correct if not
+ * in the busfree state.
+ */
+};
+
+/****************************** PCI Structures ********************************/
+#define AHD_PCI_IOADDR0 PCIR_MAPS /* I/O BAR*/
+#define AHD_PCI_MEMADDR (PCIR_MAPS + 4) /* Memory BAR */
+#define AHD_PCI_IOADDR1 (PCIR_MAPS + 12)/* Second I/O BAR */
+
+typedef int (ahd_device_setup_t)(struct ahd_softc *);
+
+struct ahd_pci_identity {
+ uint64_t full_id;
+ uint64_t id_mask;
+ char *name;
+ ahd_device_setup_t *setup;
+};
+extern struct ahd_pci_identity ahd_pci_ident_table [];
+extern const u_int ahd_num_pci_devs;
+
+/***************************** VL/EISA Declarations ***************************/
+struct aic7770_identity {
+ uint32_t full_id;
+ uint32_t id_mask;
+ char *name;
+ ahd_device_setup_t *setup;
+};
+extern struct aic7770_identity aic7770_ident_table [];
+extern const int ahd_num_aic7770_devs;
+
+#define AHD_EISA_SLOT_OFFSET 0xc00
+#define AHD_EISA_IOSIZE 0x100
+
+/*************************** Function Declarations ****************************/
+/******************************************************************************/
+void ahd_reset_cmds_pending(struct ahd_softc *ahd);
+u_int ahd_find_busy_tcl(struct ahd_softc *ahd, u_int tcl);
+void ahd_busy_tcl(struct ahd_softc *ahd,
+ u_int tcl, u_int busyid);
+static __inline void ahd_unbusy_tcl(struct ahd_softc *ahd, u_int tcl);
+static __inline void
+ahd_unbusy_tcl(struct ahd_softc *ahd, u_int tcl)
+{
+ ahd_busy_tcl(ahd, tcl, SCB_LIST_NULL);
+}
+
+/***************************** PCI Front End *********************************/
+struct ahd_pci_identity *ahd_find_pci_device(ahd_dev_softc_t);
+int ahd_pci_config(struct ahd_softc *,
+ struct ahd_pci_identity *);
+int ahd_pci_test_register_access(struct ahd_softc *);
+
+/************************** SCB and SCB queue management **********************/
+int ahd_probe_scbs(struct ahd_softc *);
+void ahd_qinfifo_requeue_tail(struct ahd_softc *ahd,
+ struct scb *scb);
+int ahd_match_scb(struct ahd_softc *ahd, struct scb *scb,
+ int target, char channel, int lun,
+ u_int tag, role_t role);
+
+/****************************** Initialization ********************************/
+struct ahd_softc *ahd_alloc(void *platform_arg, char *name);
+int ahd_softc_init(struct ahd_softc *);
+void ahd_controller_info(struct ahd_softc *ahd, char *buf);
+int ahd_init(struct ahd_softc *ahd);
+int ahd_default_config(struct ahd_softc *ahd);
+int ahd_parse_vpddata(struct ahd_softc *ahd,
+ struct vpd_config *vpd);
+int ahd_parse_cfgdata(struct ahd_softc *ahd,
+ struct seeprom_config *sc);
+void ahd_intr_enable(struct ahd_softc *ahd, int enable);
+void ahd_update_coalescing_values(struct ahd_softc *ahd,
+ u_int timer,
+ u_int maxcmds,
+ u_int mincmds);
+void ahd_enable_coalescing(struct ahd_softc *ahd,
+ int enable);
+void ahd_pause_and_flushwork(struct ahd_softc *ahd);
+int ahd_suspend(struct ahd_softc *ahd);
+int ahd_resume(struct ahd_softc *ahd);
+void ahd_softc_insert(struct ahd_softc *);
+struct ahd_softc *ahd_find_softc(struct ahd_softc *ahd);
+void ahd_set_unit(struct ahd_softc *, int);
+void ahd_set_name(struct ahd_softc *, char *);
+struct scb *ahd_get_scb(struct ahd_softc *ahd, u_int col_idx);
+void ahd_free_scb(struct ahd_softc *ahd, struct scb *scb);
+void ahd_alloc_scbs(struct ahd_softc *ahd);
+void ahd_free(struct ahd_softc *ahd);
+int ahd_reset(struct ahd_softc *ahd, int reinit);
+void ahd_shutdown(void *arg);
+int ahd_write_flexport(struct ahd_softc *ahd,
+ u_int addr, u_int value);
+int ahd_read_flexport(struct ahd_softc *ahd, u_int addr,
+ uint8_t *value);
+int ahd_wait_flexport(struct ahd_softc *ahd);
+
+/*************************** Interrupt Services *******************************/
+void ahd_pci_intr(struct ahd_softc *ahd);
+void ahd_clear_intstat(struct ahd_softc *ahd);
+void ahd_flush_qoutfifo(struct ahd_softc *ahd);
+void ahd_run_qoutfifo(struct ahd_softc *ahd);
+#ifdef AHD_TARGET_MODE
+void ahd_run_tqinfifo(struct ahd_softc *ahd, int paused);
+#endif
+void ahd_handle_hwerrint(struct ahd_softc *ahd);
+void ahd_handle_seqint(struct ahd_softc *ahd, u_int intstat);
+void ahd_handle_scsiint(struct ahd_softc *ahd,
+ u_int intstat);
+void ahd_clear_critical_section(struct ahd_softc *ahd);
+
+/***************************** Error Recovery *********************************/
+typedef enum {
+ SEARCH_COMPLETE,
+ SEARCH_COUNT,
+ SEARCH_REMOVE,
+ SEARCH_PRINT
+} ahd_search_action;
+int ahd_search_qinfifo(struct ahd_softc *ahd, int target,
+ char channel, int lun, u_int tag,
+ role_t role, uint32_t status,
+ ahd_search_action action);
+int ahd_search_disc_list(struct ahd_softc *ahd, int target,
+ char channel, int lun, u_int tag,
+ int stop_on_first, int remove,
+ int save_state);
+void ahd_freeze_devq(struct ahd_softc *ahd, struct scb *scb);
+int ahd_reset_channel(struct ahd_softc *ahd, char channel,
+ int initiate_reset);
+int ahd_abort_scbs(struct ahd_softc *ahd, int target,
+ char channel, int lun, u_int tag,
+ role_t role, uint32_t status);
+void ahd_restart(struct ahd_softc *ahd);
+void ahd_clear_fifo(struct ahd_softc *ahd, u_int fifo);
+void ahd_handle_scb_status(struct ahd_softc *ahd,
+ struct scb *scb);
+void ahd_handle_scsi_status(struct ahd_softc *ahd,
+ struct scb *scb);
+void ahd_calc_residual(struct ahd_softc *ahd,
+ struct scb *scb);
+/*************************** Utility Functions ********************************/
+struct ahd_phase_table_entry*
+ ahd_lookup_phase_entry(int phase);
+void ahd_compile_devinfo(struct ahd_devinfo *devinfo,
+ u_int our_id, u_int target,
+ u_int lun, char channel,
+ role_t role);
+/************************** Transfer Negotiation ******************************/
+void ahd_find_syncrate(struct ahd_softc *ahd, u_int *period,
+ u_int *ppr_options, u_int maxsync);
+void ahd_validate_offset(struct ahd_softc *ahd,
+ struct ahd_initiator_tinfo *tinfo,
+ u_int period, u_int *offset,
+ int wide, role_t role);
+void ahd_validate_width(struct ahd_softc *ahd,
+ struct ahd_initiator_tinfo *tinfo,
+ u_int *bus_width,
+ role_t role);
+/*
+ * Negotiation types. These are used to qualify if we should renegotiate
+ * even if our goal and current transport parameters are identical.
+ */
+typedef enum {
+ AHD_NEG_TO_GOAL, /* Renegotiate only if goal and curr differ. */
+ AHD_NEG_IF_NON_ASYNC, /* Renegotiate so long as goal is non-async. */
+ AHD_NEG_ALWAYS /* Renegotiat even if goal is async. */
+} ahd_neg_type;
+int ahd_update_neg_request(struct ahd_softc*,
+ struct ahd_devinfo*,
+ struct ahd_tmode_tstate*,
+ struct ahd_initiator_tinfo*,
+ ahd_neg_type);
+void ahd_set_width(struct ahd_softc *ahd,
+ struct ahd_devinfo *devinfo,
+ u_int width, u_int type, int paused);
+void ahd_set_syncrate(struct ahd_softc *ahd,
+ struct ahd_devinfo *devinfo,
+ u_int period, u_int offset,
+ u_int ppr_options,
+ u_int type, int paused);
+typedef enum {
+ AHD_QUEUE_NONE,
+ AHD_QUEUE_BASIC,
+ AHD_QUEUE_TAGGED
+} ahd_queue_alg;
+
+void ahd_set_tags(struct ahd_softc *ahd,
+ struct ahd_devinfo *devinfo,
+ ahd_queue_alg alg);
+
+/**************************** Target Mode *************************************/
+#ifdef AHD_TARGET_MODE
+void ahd_send_lstate_events(struct ahd_softc *,
+ struct ahd_tmode_lstate *);
+void ahd_handle_en_lun(struct ahd_softc *ahd,
+ struct cam_sim *sim, union ccb *ccb);
+cam_status ahd_find_tmode_devs(struct ahd_softc *ahd,
+ struct cam_sim *sim, union ccb *ccb,
+ struct ahd_tmode_tstate **tstate,
+ struct ahd_tmode_lstate **lstate,
+ int notfound_failure);
+#ifndef AHD_TMODE_ENABLE
+#define AHD_TMODE_ENABLE 0
+#endif
+#endif
+/******************************* Debug ***************************************/
+#ifdef AHD_DEBUG
+extern uint32_t ahd_debug;
+#define AHD_SHOW_MISC 0x00001
+#define AHD_SHOW_SENSE 0x00002
+#define AHD_SHOW_RECOVERY 0x00004
+#define AHD_DUMP_SEEPROM 0x00008
+#define AHD_SHOW_TERMCTL 0x00010
+#define AHD_SHOW_MEMORY 0x00020
+#define AHD_SHOW_MESSAGES 0x00040
+#define AHD_SHOW_MODEPTR 0x00080
+#define AHD_SHOW_SELTO 0x00100
+#define AHD_SHOW_FIFOS 0x00200
+#define AHD_SHOW_QFULL 0x00400
+#define AHD_SHOW_DV 0x00800
+#define AHD_SHOW_MASKED_ERRORS 0x01000
+#define AHD_SHOW_QUEUE 0x02000
+#define AHD_SHOW_TQIN 0x04000
+#define AHD_SHOW_SG 0x08000
+#define AHD_SHOW_INT_COALESCING 0x10000
+#define AHD_DEBUG_SEQUENCER 0x20000
+#endif
+void ahd_print_scb(struct scb *scb);
+void ahd_print_devinfo(struct ahd_softc *ahd,
+ struct ahd_devinfo *devinfo);
+void ahd_dump_sglist(struct scb *scb);
+void ahd_dump_all_cards_state(void);
+void ahd_dump_card_state(struct ahd_softc *ahd);
+int ahd_print_register(ahd_reg_parse_entry_t *table,
+ u_int num_entries,
+ const char *name,
+ u_int address,
+ u_int value,
+ u_int *cur_column,
+ u_int wrap_point);
+void ahd_dump_scbs(struct ahd_softc *ahd);
+#endif /* _AIC79XX_H_ */