diff options
Diffstat (limited to 'drivers/scsi/aic7xxx/aic79xx_pci.c')
| -rw-r--r-- | drivers/scsi/aic7xxx/aic79xx_pci.c | 987 |
1 files changed, 987 insertions, 0 deletions
diff --git a/drivers/scsi/aic7xxx/aic79xx_pci.c b/drivers/scsi/aic7xxx/aic79xx_pci.c new file mode 100644 index 00000000000..4c3bb7bb842 --- /dev/null +++ b/drivers/scsi/aic7xxx/aic79xx_pci.c @@ -0,0 +1,987 @@ +/* + * Product specific probe and attach routines for: + * aic7901 and aic7902 SCSI controllers + * + * Copyright (c) 1994-2001 Justin T. Gibbs. + * Copyright (c) 2000-2002 Adaptec Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + * + * $Id: //depot/aic7xxx/aic7xxx/aic79xx_pci.c#77 $ + * + * $FreeBSD$ + */ + +#ifdef __linux__ +#include "aic79xx_osm.h" +#include "aic79xx_inline.h" +#else +#include <dev/aic7xxx/aic79xx_osm.h> +#include <dev/aic7xxx/aic79xx_inline.h> +#endif + +#include "aic79xx_pci.h" + +static __inline uint64_t +ahd_compose_id(u_int device, u_int vendor, u_int subdevice, u_int subvendor) +{ + uint64_t id; + + id = subvendor + | (subdevice << 16) + | ((uint64_t)vendor << 32) + | ((uint64_t)device << 48); + + return (id); +} + +#define ID_AIC7902_PCI_REV_A4 0x3 +#define ID_AIC7902_PCI_REV_B0 0x10 +#define SUBID_HP 0x0E11 + +#define DEVID_9005_HOSTRAID(id) ((id) & 0x80) + +#define DEVID_9005_TYPE(id) ((id) & 0xF) +#define DEVID_9005_TYPE_HBA 0x0 /* Standard Card */ +#define DEVID_9005_TYPE_HBA_2EXT 0x1 /* 2 External Ports */ +#define DEVID_9005_TYPE_IROC 0x8 /* Raid(0,1,10) Card */ +#define DEVID_9005_TYPE_MB 0xF /* On Motherboard */ + +#define DEVID_9005_MFUNC(id) ((id) & 0x10) + +#define DEVID_9005_PACKETIZED(id) ((id) & 0x8000) + +#define SUBID_9005_TYPE(id) ((id) & 0xF) +#define SUBID_9005_TYPE_HBA 0x0 /* Standard Card */ +#define SUBID_9005_TYPE_MB 0xF /* On Motherboard */ + +#define SUBID_9005_AUTOTERM(id) (((id) & 0x10) == 0) + +#define SUBID_9005_LEGACYCONN_FUNC(id) ((id) & 0x20) + +#define SUBID_9005_SEEPTYPE(id) ((id) & 0x0C0) >> 6) +#define SUBID_9005_SEEPTYPE_NONE 0x0 +#define SUBID_9005_SEEPTYPE_4K 0x1 + +static ahd_device_setup_t ahd_aic7901_setup; +static ahd_device_setup_t ahd_aic7901A_setup; +static ahd_device_setup_t ahd_aic7902_setup; +static ahd_device_setup_t ahd_aic790X_setup; + +struct ahd_pci_identity ahd_pci_ident_table [] = +{ + /* aic7901 based controllers */ + { + ID_AHA_29320A, + ID_ALL_MASK, + "Adaptec 29320A Ultra320 SCSI adapter", + ahd_aic7901_setup + }, + { + ID_AHA_29320ALP, + ID_ALL_MASK, + "Adaptec 29320ALP Ultra320 SCSI adapter", + ahd_aic7901_setup + }, + /* aic7902 based controllers */ + { + ID_AHA_29320, + ID_ALL_MASK, + "Adaptec 29320 Ultra320 SCSI adapter", + ahd_aic7902_setup + }, + { + ID_AHA_29320B, + ID_ALL_MASK, + "Adaptec 29320B Ultra320 SCSI adapter", + ahd_aic7902_setup + }, + { + ID_AHA_29320LP, + ID_ALL_MASK, + "Adaptec 29320LP Ultra320 SCSI adapter", + ahd_aic7901A_setup + }, + { + ID_AHA_39320, + ID_ALL_MASK, + "Adaptec 39320 Ultra320 SCSI adapter", + ahd_aic7902_setup + }, + { + ID_AHA_39320_B, + ID_ALL_MASK, + "Adaptec 39320 Ultra320 SCSI adapter", + ahd_aic7902_setup + }, + { + ID_AHA_39320A, + ID_ALL_MASK, + "Adaptec 39320A Ultra320 SCSI adapter", + ahd_aic7902_setup + }, + { + ID_AHA_39320D, + ID_ALL_MASK, + "Adaptec 39320D Ultra320 SCSI adapter", + ahd_aic7902_setup + }, + { + ID_AHA_39320D_HP, + ID_ALL_MASK, + "Adaptec (HP OEM) 39320D Ultra320 SCSI adapter", + ahd_aic7902_setup + }, + { + ID_AHA_39320D_B, + ID_ALL_MASK, + "Adaptec 39320D Ultra320 SCSI adapter", + ahd_aic7902_setup + }, + { + ID_AHA_39320D_B_HP, + ID_ALL_MASK, + "Adaptec (HP OEM) 39320D Ultra320 SCSI adapter", + ahd_aic7902_setup + }, + /* Generic chip probes for devices we don't know 'exactly' */ + { + ID_AIC7901 & ID_9005_GENERIC_MASK, + ID_9005_GENERIC_MASK, + "Adaptec AIC7901 Ultra320 SCSI adapter", + ahd_aic7901_setup + }, + { + ID_AIC7901A & ID_DEV_VENDOR_MASK, + ID_DEV_VENDOR_MASK, + "Adaptec AIC7901A Ultra320 SCSI adapter", + ahd_aic7901A_setup + }, + { + ID_AIC7902 & ID_9005_GENERIC_MASK, + ID_9005_GENERIC_MASK, + "Adaptec AIC7902 Ultra320 SCSI adapter", + ahd_aic7902_setup + } +}; + +const u_int ahd_num_pci_devs = NUM_ELEMENTS(ahd_pci_ident_table); + +#define DEVCONFIG 0x40 +#define PCIXINITPAT 0x0000E000ul +#define PCIXINIT_PCI33_66 0x0000E000ul +#define PCIXINIT_PCIX50_66 0x0000C000ul +#define PCIXINIT_PCIX66_100 0x0000A000ul +#define PCIXINIT_PCIX100_133 0x00008000ul +#define PCI_BUS_MODES_INDEX(devconfig) \ + (((devconfig) & PCIXINITPAT) >> 13) +static const char *pci_bus_modes[] = +{ + "PCI bus mode unknown", + "PCI bus mode unknown", + "PCI bus mode unknown", + "PCI bus mode unknown", + "PCI-X 101-133Mhz", + "PCI-X 67-100Mhz", + "PCI-X 50-66Mhz", + "PCI 33 or 66Mhz" +}; + +#define TESTMODE 0x00000800ul +#define IRDY_RST 0x00000200ul +#define FRAME_RST 0x00000100ul +#define PCI64BIT 0x00000080ul +#define MRDCEN 0x00000040ul +#define ENDIANSEL 0x00000020ul +#define MIXQWENDIANEN 0x00000008ul +#define DACEN 0x00000004ul +#define STPWLEVEL 0x00000002ul +#define QWENDIANSEL 0x00000001ul + +#define DEVCONFIG1 0x44 +#define PREQDIS 0x01 + +#define CSIZE_LATTIME 0x0c +#define CACHESIZE 0x000000fful +#define LATTIME 0x0000ff00ul + +static int ahd_check_extport(struct ahd_softc *ahd); +static void ahd_configure_termination(struct ahd_softc *ahd, + u_int adapter_control); +static void ahd_pci_split_intr(struct ahd_softc *ahd, u_int intstat); + +struct ahd_pci_identity * +ahd_find_pci_device(ahd_dev_softc_t pci) +{ + uint64_t full_id; + uint16_t device; + uint16_t vendor; + uint16_t subdevice; + uint16_t subvendor; + struct ahd_pci_identity *entry; + u_int i; + + vendor = ahd_pci_read_config(pci, PCIR_DEVVENDOR, /*bytes*/2); + device = ahd_pci_read_config(pci, PCIR_DEVICE, /*bytes*/2); + subvendor = ahd_pci_read_config(pci, PCIR_SUBVEND_0, /*bytes*/2); + subdevice = ahd_pci_read_config(pci, PCIR_SUBDEV_0, /*bytes*/2); + full_id = ahd_compose_id(device, + vendor, + subdevice, + subvendor); + + /* + * Controllers, mask out the IROC/HostRAID bit + */ + + full_id &= ID_ALL_IROC_MASK; + + for (i = 0; i < ahd_num_pci_devs; i++) { + entry = &ahd_pci_ident_table[i]; + if (entry->full_id == (full_id & entry->id_mask)) { + /* Honor exclusion entries. */ + if (entry->name == NULL) + return (NULL); + return (entry); + } + } + return (NULL); +} + +int +ahd_pci_config(struct ahd_softc *ahd, struct ahd_pci_identity *entry) +{ + struct scb_data *shared_scb_data; + u_long l; + u_int command; + uint32_t devconfig; + uint16_t subvendor; + int error; + + shared_scb_data = NULL; + ahd->description = entry->name; + /* + * Record if this is an HP board. + */ + subvendor = ahd_pci_read_config(ahd->dev_softc, + PCIR_SUBVEND_0, /*bytes*/2); + if (subvendor == SUBID_HP) + ahd->flags |= AHD_HP_BOARD; + + error = entry->setup(ahd); + if (error != 0) + return (error); + + devconfig = ahd_pci_read_config(ahd->dev_softc, DEVCONFIG, /*bytes*/4); + if ((devconfig & PCIXINITPAT) == PCIXINIT_PCI33_66) { + ahd->chip |= AHD_PCI; + /* Disable PCIX workarounds when running in PCI mode. */ + ahd->bugs &= ~AHD_PCIX_BUG_MASK; + } else { + ahd->chip |= AHD_PCIX; + } + ahd->bus_description = pci_bus_modes[PCI_BUS_MODES_INDEX(devconfig)]; + + ahd_power_state_change(ahd, AHD_POWER_STATE_D0); + + error = ahd_pci_map_registers(ahd); + if (error != 0) + return (error); + + /* + * If we need to support high memory, enable dual + * address cycles. This bit must be set to enable + * high address bit generation even if we are on a + * 64bit bus (PCI64BIT set in devconfig). + */ + if ((ahd->flags & (AHD_39BIT_ADDRESSING|AHD_64BIT_ADDRESSING)) != 0) { + uint32_t devconfig; + + if (bootverbose) + printf("%s: Enabling 39Bit Addressing\n", + ahd_name(ahd)); + devconfig = ahd_pci_read_config(ahd->dev_softc, + DEVCONFIG, /*bytes*/4); + devconfig |= DACEN; + ahd_pci_write_config(ahd->dev_softc, DEVCONFIG, + devconfig, /*bytes*/4); + } + + /* Ensure busmastering is enabled */ + command = ahd_pci_read_config(ahd->dev_softc, PCIR_COMMAND, /*bytes*/2); + command |= PCIM_CMD_BUSMASTEREN; + ahd_pci_write_config(ahd->dev_softc, PCIR_COMMAND, command, /*bytes*/2); + + error = ahd_softc_init(ahd); + if (error != 0) + return (error); + + ahd->bus_intr = ahd_pci_intr; + + error = ahd_reset(ahd, /*reinit*/FALSE); + if (error != 0) + return (ENXIO); + + ahd->pci_cachesize = + ahd_pci_read_config(ahd->dev_softc, CSIZE_LATTIME, + /*bytes*/1) & CACHESIZE; + ahd->pci_cachesize *= 4; + + ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); + /* See if we have a SEEPROM and perform auto-term */ + error = ahd_check_extport(ahd); + if (error != 0) + return (error); + + /* Core initialization */ + error = ahd_init(ahd); + if (error != 0) + return (error); + + /* + * Allow interrupts now that we are completely setup. + */ + error = ahd_pci_map_int(ahd); + if (error != 0) + return (error); + + ahd_list_lock(&l); + /* + * Link this softc in with all other ahd instances. + */ + ahd_softc_insert(ahd); + ahd_list_unlock(&l); + return (0); +} + +/* + * Perform some simple tests that should catch situations where + * our registers are invalidly mapped. + */ +int +ahd_pci_test_register_access(struct ahd_softc *ahd) +{ + uint32_t cmd; + u_int targpcistat; + u_int pci_status1; + int error; + uint8_t hcntrl; + + error = EIO; + + /* + * Enable PCI error interrupt status, but suppress NMIs + * generated by SERR raised due to target aborts. + */ + cmd = ahd_pci_read_config(ahd->dev_softc, PCIR_COMMAND, /*bytes*/2); + ahd_pci_write_config(ahd->dev_softc, PCIR_COMMAND, + cmd & ~PCIM_CMD_SERRESPEN, /*bytes*/2); + + /* + * First a simple test to see if any + * registers can be read. Reading + * HCNTRL has no side effects and has + * at least one bit that is guaranteed to + * be zero so it is a good register to + * use for this test. + */ + hcntrl = ahd_inb(ahd, HCNTRL); + if (hcntrl == 0xFF) + goto fail; + + /* + * Next create a situation where write combining + * or read prefetching could be initiated by the + * CPU or host bridge. Our device does not support + * either, so look for data corruption and/or flaged + * PCI errors. First pause without causing another + * chip reset. + */ + hcntrl &= ~CHIPRST; + ahd_outb(ahd, HCNTRL, hcntrl|PAUSE); + while (ahd_is_paused(ahd) == 0) + ; + + /* Clear any PCI errors that occurred before our driver attached. */ + ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); + targpcistat = ahd_inb(ahd, TARGPCISTAT); + ahd_outb(ahd, TARGPCISTAT, targpcistat); + pci_status1 = ahd_pci_read_config(ahd->dev_softc, + PCIR_STATUS + 1, /*bytes*/1); + ahd_pci_write_config(ahd->dev_softc, PCIR_STATUS + 1, + pci_status1, /*bytes*/1); + ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI); + ahd_outb(ahd, CLRINT, CLRPCIINT); + + ahd_outb(ahd, SEQCTL0, PERRORDIS); + ahd_outl(ahd, SRAM_BASE, 0x5aa555aa); + if (ahd_inl(ahd, SRAM_BASE) != 0x5aa555aa) + goto fail; + + if ((ahd_inb(ahd, INTSTAT) & PCIINT) != 0) { + u_int targpcistat; + + ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); + targpcistat = ahd_inb(ahd, TARGPCISTAT); + if ((targpcistat & STA) != 0) + goto fail; + } + + error = 0; + +fail: + if ((ahd_inb(ahd, INTSTAT) & PCIINT) != 0) { + + ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); + targpcistat = ahd_inb(ahd, TARGPCISTAT); + + /* Silently clear any latched errors. */ + ahd_outb(ahd, TARGPCISTAT, targpcistat); + pci_status1 = ahd_pci_read_config(ahd->dev_softc, + PCIR_STATUS + 1, /*bytes*/1); + ahd_pci_write_config(ahd->dev_softc, PCIR_STATUS + 1, + pci_status1, /*bytes*/1); + ahd_outb(ahd, CLRINT, CLRPCIINT); + } + ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS); + ahd_pci_write_config(ahd->dev_softc, PCIR_COMMAND, cmd, /*bytes*/2); + return (error); +} + +/* + * Check the external port logic for a serial eeprom + * and termination/cable detection contrls. + */ +static int +ahd_check_extport(struct ahd_softc *ahd) +{ + struct vpd_config vpd; + struct seeprom_config *sc; + u_int adapter_control; + int have_seeprom; + int error; + + sc = ahd->seep_config; + have_seeprom = ahd_acquire_seeprom(ahd); + if (have_seeprom) { + u_int start_addr; + + /* + * Fetch VPD for this function and parse it. + */ + if (bootverbose) + printf("%s: Reading VPD from SEEPROM...", + ahd_name(ahd)); + + /* Address is always in units of 16bit words */ + start_addr = ((2 * sizeof(*sc)) + + (sizeof(vpd) * (ahd->channel - 'A'))) / 2; + + error = ahd_read_seeprom(ahd, (uint16_t *)&vpd, + start_addr, sizeof(vpd)/2, + /*bytestream*/TRUE); + if (error == 0) + error = ahd_parse_vpddata(ahd, &vpd); + if (bootverbose) + printf("%s: VPD parsing %s\n", + ahd_name(ahd), + error == 0 ? "successful" : "failed"); + + if (bootverbose) + printf("%s: Reading SEEPROM...", ahd_name(ahd)); + + /* Address is always in units of 16bit words */ + start_addr = (sizeof(*sc) / 2) * (ahd->channel - 'A'); + + error = ahd_read_seeprom(ahd, (uint16_t *)sc, + start_addr, sizeof(*sc)/2, + /*bytestream*/FALSE); + + if (error != 0) { + printf("Unable to read SEEPROM\n"); + have_seeprom = 0; + } else { + have_seeprom = ahd_verify_cksum(sc); + + if (bootverbose) { + if (have_seeprom == 0) + printf ("checksum error\n"); + else + printf ("done.\n"); + } + } + ahd_release_seeprom(ahd); + } + + if (!have_seeprom) { + u_int nvram_scb; + + /* + * Pull scratch ram settings and treat them as + * if they are the contents of an seeprom if + * the 'ADPT', 'BIOS', or 'ASPI' signature is found + * in SCB 0xFF. We manually compose the data as 16bit + * values to avoid endian issues. + */ + ahd_set_scbptr(ahd, 0xFF); + nvram_scb = ahd_inb_scbram(ahd, SCB_BASE + NVRAM_SCB_OFFSET); + if (nvram_scb != 0xFF + && ((ahd_inb_scbram(ahd, SCB_BASE + 0) == 'A' + && ahd_inb_scbram(ahd, SCB_BASE + 1) == 'D' + && ahd_inb_scbram(ahd, SCB_BASE + 2) == 'P' + && ahd_inb_scbram(ahd, SCB_BASE + 3) == 'T') + || (ahd_inb_scbram(ahd, SCB_BASE + 0) == 'B' + && ahd_inb_scbram(ahd, SCB_BASE + 1) == 'I' + && ahd_inb_scbram(ahd, SCB_BASE + 2) == 'O' + && ahd_inb_scbram(ahd, SCB_BASE + 3) == 'S') + || (ahd_inb_scbram(ahd, SCB_BASE + 0) == 'A' + && ahd_inb_scbram(ahd, SCB_BASE + 1) == 'S' + && ahd_inb_scbram(ahd, SCB_BASE + 2) == 'P' + && ahd_inb_scbram(ahd, SCB_BASE + 3) == 'I'))) { + uint16_t *sc_data; + int i; + + ahd_set_scbptr(ahd, nvram_scb); + sc_data = (uint16_t *)sc; + for (i = 0; i < 64; i += 2) + *sc_data++ = ahd_inw_scbram(ahd, SCB_BASE+i); + have_seeprom = ahd_verify_cksum(sc); + if (have_seeprom) + ahd->flags |= AHD_SCB_CONFIG_USED; + } + } + +#if AHD_DEBUG + if (have_seeprom != 0 + && (ahd_debug & AHD_DUMP_SEEPROM) != 0) { + uint16_t *sc_data; + int i; + + printf("%s: Seeprom Contents:", ahd_name(ahd)); + sc_data = (uint16_t *)sc; + for (i = 0; i < (sizeof(*sc)); i += 2) + printf("\n\t0x%.4x", sc_data[i]); + printf("\n"); + } +#endif + + if (!have_seeprom) { + if (bootverbose) + printf("%s: No SEEPROM available.\n", ahd_name(ahd)); + ahd->flags |= AHD_USEDEFAULTS; + error = ahd_default_config(ahd); + adapter_control = CFAUTOTERM|CFSEAUTOTERM; + free(ahd->seep_config, M_DEVBUF); + ahd->seep_config = NULL; + } else { + error = ahd_parse_cfgdata(ahd, sc); + adapter_control = sc->adapter_control; + } + if (error != 0) + return (error); + + ahd_configure_termination(ahd, adapter_control); + + return (0); +} + +static void +ahd_configure_termination(struct ahd_softc *ahd, u_int adapter_control) +{ + int error; + u_int sxfrctl1; + uint8_t termctl; + uint32_t devconfig; + + devconfig = ahd_pci_read_config(ahd->dev_softc, DEVCONFIG, /*bytes*/4); + devconfig &= ~STPWLEVEL; + if ((ahd->flags & AHD_STPWLEVEL_A) != 0) + devconfig |= STPWLEVEL; + if (bootverbose) + printf("%s: STPWLEVEL is %s\n", + ahd_name(ahd), (devconfig & STPWLEVEL) ? "on" : "off"); + ahd_pci_write_config(ahd->dev_softc, DEVCONFIG, devconfig, /*bytes*/4); + + /* Make sure current sensing is off. */ + if ((ahd->flags & AHD_CURRENT_SENSING) != 0) { + (void)ahd_write_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, 0); + } + + /* + * Read to sense. Write to set. + */ + error = ahd_read_flexport(ahd, FLXADDR_TERMCTL, &termctl); + if ((adapter_control & CFAUTOTERM) == 0) { + if (bootverbose) + printf("%s: Manual Primary Termination\n", + ahd_name(ahd)); + termctl &= ~(FLX_TERMCTL_ENPRILOW|FLX_TERMCTL_ENPRIHIGH); + if ((adapter_control & CFSTERM) != 0) + termctl |= FLX_TERMCTL_ENPRILOW; + if ((adapter_control & CFWSTERM) != 0) + termctl |= FLX_TERMCTL_ENPRIHIGH; + } else if (error != 0) { + printf("%s: Primary Auto-Term Sensing failed! " + "Using Defaults.\n", ahd_name(ahd)); + termctl = FLX_TERMCTL_ENPRILOW|FLX_TERMCTL_ENPRIHIGH; + } + + if ((adapter_control & CFSEAUTOTERM) == 0) { + if (bootverbose) + printf("%s: Manual Secondary Termination\n", + ahd_name(ahd)); + termctl &= ~(FLX_TERMCTL_ENSECLOW|FLX_TERMCTL_ENSECHIGH); + if ((adapter_control & CFSELOWTERM) != 0) + termctl |= FLX_TERMCTL_ENSECLOW; + if ((adapter_control & CFSEHIGHTERM) != 0) + termctl |= FLX_TERMCTL_ENSECHIGH; + } else if (error != 0) { + printf("%s: Secondary Auto-Term Sensing failed! " + "Using Defaults.\n", ahd_name(ahd)); + termctl |= FLX_TERMCTL_ENSECLOW|FLX_TERMCTL_ENSECHIGH; + } + + /* + * Now set the termination based on what we found. + */ + sxfrctl1 = ahd_inb(ahd, SXFRCTL1) & ~STPWEN; + if ((termctl & FLX_TERMCTL_ENPRILOW) != 0) { + ahd->flags |= AHD_TERM_ENB_A; + sxfrctl1 |= STPWEN; + } + /* Must set the latch once in order to be effective. */ + ahd_outb(ahd, SXFRCTL1, sxfrctl1|STPWEN); + ahd_outb(ahd, SXFRCTL1, sxfrctl1); + + error = ahd_write_flexport(ahd, FLXADDR_TERMCTL, termctl); + if (error != 0) { + printf("%s: Unable to set termination settings!\n", + ahd_name(ahd)); + } else if (bootverbose) { + printf("%s: Primary High byte termination %sabled\n", + ahd_name(ahd), + (termctl & FLX_TERMCTL_ENPRIHIGH) ? "En" : "Dis"); + + printf("%s: Primary Low byte termination %sabled\n", + ahd_name(ahd), + (termctl & FLX_TERMCTL_ENPRILOW) ? "En" : "Dis"); + + printf("%s: Secondary High byte termination %sabled\n", + ahd_name(ahd), + (termctl & FLX_TERMCTL_ENSECHIGH) ? "En" : "Dis"); + + printf("%s: Secondary Low byte termination %sabled\n", + ahd_name(ahd), + (termctl & FLX_TERMCTL_ENSECLOW) ? "En" : "Dis"); + } + return; +} + +#define DPE 0x80 +#define SSE 0x40 +#define RMA 0x20 +#define RTA 0x10 +#define STA 0x08 +#define DPR 0x01 + +static const char *split_status_source[] = +{ + "DFF0", + "DFF1", + "OVLY", + "CMC", +}; + +static const char *pci_status_source[] = +{ + "DFF0", + "DFF1", + "SG", + "CMC", + "OVLY", + "NONE", + "MSI", + "TARG" +}; + +static const char *split_status_strings[] = +{ + "%s: Received split response in %s.\n", + "%s: Received split completion error message in %s\n", + "%s: Receive overrun in %s\n", + "%s: Count not complete in %s\n", + "%s: Split completion data bucket in %s\n", + "%s: Split completion address error in %s\n", + "%s: Split completion byte count error in %s\n", + "%s: Signaled Target-abort to early terminate a split in %s\n" +}; + +static const char *pci_status_strings[] = +{ + "%s: Data Parity Error has been reported via PERR# in %s\n", + "%s: Target initial wait state error in %s\n", + "%s: Split completion read data parity error in %s\n", + "%s: Split completion address attribute parity error in %s\n", + "%s: Received a Target Abort in %s\n", + "%s: Received a Master Abort in %s\n", + "%s: Signal System Error Detected in %s\n", + "%s: Address or Write Phase Parity Error Detected in %s.\n" +}; + +void +ahd_pci_intr(struct ahd_softc *ahd) +{ + uint8_t pci_status[8]; + ahd_mode_state saved_modes; + u_int pci_status1; + u_int intstat; + u_int i; + u_int reg; + + intstat = ahd_inb(ahd, INTSTAT); + + if ((intstat & SPLTINT) != 0) + ahd_pci_split_intr(ahd, intstat); + + if ((intstat & PCIINT) == 0) + return; + + printf("%s: PCI error Interrupt\n", ahd_name(ahd)); + saved_modes = ahd_save_modes(ahd); + ahd_dump_card_state(ahd); + ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); + for (i = 0, reg = DF0PCISTAT; i < 8; i++, reg++) { + + if (i == 5) + continue; + pci_status[i] = ahd_inb(ahd, reg); + /* Clear latched errors. So our interrupt deasserts. */ + ahd_outb(ahd, reg, pci_status[i]); + } + + for (i = 0; i < 8; i++) { + u_int bit; + + if (i == 5) + continue; + + for (bit = 0; bit < 8; bit++) { + + if ((pci_status[i] & (0x1 << bit)) != 0) { + static const char *s; + + s = pci_status_strings[bit]; + if (i == 7/*TARG*/ && bit == 3) + s = "%s: Signaled Target Abort\n"; + printf(s, ahd_name(ahd), pci_status_source[i]); + } + } + } + pci_status1 = ahd_pci_read_config(ahd->dev_softc, + PCIR_STATUS + 1, /*bytes*/1); + ahd_pci_write_config(ahd->dev_softc, PCIR_STATUS + 1, + pci_status1, /*bytes*/1); + ahd_restore_modes(ahd, saved_modes); + ahd_outb(ahd, CLRINT, CLRPCIINT); + ahd_unpause(ahd); +} + +static void +ahd_pci_split_intr(struct ahd_softc *ahd, u_int intstat) +{ + uint8_t split_status[4]; + uint8_t split_status1[4]; + uint8_t sg_split_status[2]; + uint8_t sg_split_status1[2]; + ahd_mode_state saved_modes; + u_int i; + uint16_t pcix_status; + + /* + * Check for splits in all modes. Modes 0 and 1 + * additionally have SG engine splits to look at. + */ + pcix_status = ahd_pci_read_config(ahd->dev_softc, PCIXR_STATUS, + /*bytes*/2); + printf("%s: PCI Split Interrupt - PCI-X status = 0x%x\n", + ahd_name(ahd), pcix_status); + saved_modes = ahd_save_modes(ahd); + for (i = 0; i < 4; i++) { + ahd_set_modes(ahd, i, i); + + split_status[i] = ahd_inb(ahd, DCHSPLTSTAT0); + split_status1[i] = ahd_inb(ahd, DCHSPLTSTAT1); + /* Clear latched errors. So our interrupt deasserts. */ + ahd_outb(ahd, DCHSPLTSTAT0, split_status[i]); + ahd_outb(ahd, DCHSPLTSTAT1, split_status1[i]); + if (i > 1) + continue; + sg_split_status[i] = ahd_inb(ahd, SGSPLTSTAT0); + sg_split_status1[i] = ahd_inb(ahd, SGSPLTSTAT1); + /* Clear latched errors. So our interrupt deasserts. */ + ahd_outb(ahd, SGSPLTSTAT0, sg_split_status[i]); + ahd_outb(ahd, SGSPLTSTAT1, sg_split_status1[i]); + } + + for (i = 0; i < 4; i++) { + u_int bit; + + for (bit = 0; bit < 8; bit++) { + + if ((split_status[i] & (0x1 << bit)) != 0) { + static const char *s; + + s = split_status_strings[bit]; + printf(s, ahd_name(ahd), + split_status_source[i]); + } + + if (i > 1) + continue; + + if ((sg_split_status[i] & (0x1 << bit)) != 0) { + static const char *s; + + s = split_status_strings[bit]; + printf(s, ahd_name(ahd), "SG"); + } + } + } + /* + * Clear PCI-X status bits. + */ + ahd_pci_write_config(ahd->dev_softc, PCIXR_STATUS, + pcix_status, /*bytes*/2); + ahd_outb(ahd, CLRINT, CLRSPLTINT); + ahd_restore_modes(ahd, saved_modes); +} + +static int +ahd_aic7901_setup(struct ahd_softc *ahd) +{ + + ahd->chip = AHD_AIC7901; + ahd->features = AHD_AIC7901_FE; + return (ahd_aic790X_setup(ahd)); +} + +static int +ahd_aic7901A_setup(struct ahd_softc *ahd) +{ + + ahd->chip = AHD_AIC7901A; + ahd->features = AHD_AIC7901A_FE; + return (ahd_aic790X_setup(ahd)); +} + +static int +ahd_aic7902_setup(struct ahd_softc *ahd) +{ + ahd->chip = AHD_AIC7902; + ahd->features = AHD_AIC7902_FE; + return (ahd_aic790X_setup(ahd)); +} + +static int +ahd_aic790X_setup(struct ahd_softc *ahd) +{ + ahd_dev_softc_t pci; + u_int rev; + + pci = ahd->dev_softc; + rev = ahd_pci_read_config(pci, PCIR_REVID, /*bytes*/1); + if (rev < ID_AIC7902_PCI_REV_A4) { + printf("%s: Unable to attach to unsupported chip revision %d\n", + ahd_name(ahd), rev); + ahd_pci_write_config(pci, PCIR_COMMAND, 0, /*bytes*/2); + return (ENXIO); + } + ahd->channel = ahd_get_pci_function(pci) + 'A'; + if (rev < ID_AIC7902_PCI_REV_B0) { + /* + * Enable A series workarounds. + */ + ahd->bugs |= AHD_SENT_SCB_UPDATE_BUG|AHD_ABORT_LQI_BUG + | AHD_PKT_BITBUCKET_BUG|AHD_LONG_SETIMO_BUG + | AHD_NLQICRC_DELAYED_BUG|AHD_SCSIRST_BUG + | AHD_LQO_ATNO_BUG|AHD_AUTOFLUSH_BUG + | AHD_CLRLQO_AUTOCLR_BUG|AHD_PCIX_MMAPIO_BUG + | AHD_PCIX_CHIPRST_BUG|AHD_PCIX_SCBRAM_RD_BUG + | AHD_PKTIZED_STATUS_BUG|AHD_PKT_LUN_BUG + | AHD_MDFF_WSCBPTR_BUG|AHD_REG_SLOW_SETTLE_BUG + | AHD_SET_MODE_BUG|AHD_BUSFREEREV_BUG + | AHD_NONPACKFIFO_BUG|AHD_PACED_NEGTABLE_BUG + | AHD_FAINT_LED_BUG; + + /* + * IO Cell paramter setup. + */ + AHD_SET_PRECOMP(ahd, AHD_PRECOMP_CUTBACK_29); + + if ((ahd->flags & AHD_HP_BOARD) == 0) + AHD_SET_SLEWRATE(ahd, AHD_SLEWRATE_DEF_REVA); + } else { + u_int devconfig1; + + ahd->features |= AHD_RTI|AHD_NEW_IOCELL_OPTS + | AHD_NEW_DFCNTRL_OPTS|AHD_FAST_CDB_DELIVERY; + ahd->bugs |= AHD_LQOOVERRUN_BUG|AHD_EARLY_REQ_BUG; + + /* + * Some issues have been resolved in the 7901B. + */ + if ((ahd->features & AHD_MULTI_FUNC) != 0) + ahd->bugs |= AHD_INTCOLLISION_BUG|AHD_ABORT_LQI_BUG; + + /* + * IO Cell paramter setup. + */ + AHD_SET_PRECOMP(ahd, AHD_PRECOMP_CUTBACK_29); + AHD_SET_SLEWRATE(ahd, AHD_SLEWRATE_DEF_REVB); + AHD_SET_AMPLITUDE(ahd, AHD_AMPLITUDE_DEF); + + /* + * Set the PREQDIS bit for H2B which disables some workaround + * that doesn't work on regular PCI busses. + * XXX - Find out exactly what this does from the hardware + * folks! + */ + devconfig1 = ahd_pci_read_config(pci, DEVCONFIG1, /*bytes*/1); + ahd_pci_write_config(pci, DEVCONFIG1, + devconfig1|PREQDIS, /*bytes*/1); + devconfig1 = ahd_pci_read_config(pci, DEVCONFIG1, /*bytes*/1); + } + + return (0); +} |