diff options
Diffstat (limited to 'drivers/scsi/ata_piix.c')
| -rw-r--r-- | drivers/scsi/ata_piix.c | 28 |
1 files changed, 19 insertions, 9 deletions
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 6dc88149f9f..ad41dfd33e0 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -93,7 +93,7 @@ #include <linux/libata.h> #define DRV_NAME "ata_piix" -#define DRV_VERSION "1.05" +#define DRV_VERSION "1.10" enum { PIIX_IOCFG = 0x54, /* IDE I/O configuration register */ @@ -159,6 +159,7 @@ static const struct pci_device_id piix_pci_tbl[] = { { 0x8086, 0x7111, PCI_ANY_ID, PCI_ANY_ID, 0, 0, piix4_pata }, { 0x8086, 0x24db, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, { 0x8086, 0x25a2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, + { 0x8086, 0x27df, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_pata }, #endif /* NOTE: The following PCI ids must be kept in sync with the @@ -227,6 +228,7 @@ static const struct ata_port_operations piix_pata_ops = { .port_disable = ata_port_disable, .set_piomode = piix_set_piomode, .set_dmamode = piix_set_dmamode, + .mode_filter = ata_pci_default_filter, .tf_load = ata_tf_load, .tf_read = ata_tf_read, @@ -242,8 +244,12 @@ static const struct ata_port_operations piix_pata_ops = { .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, - .eng_timeout = ata_eng_timeout, + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, @@ -270,8 +276,12 @@ static const struct ata_port_operations piix_sata_ops = { .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, - .eng_timeout = ata_eng_timeout, + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, @@ -484,7 +494,7 @@ static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes) struct pci_dev *pdev = to_pci_dev(ap->host_set->dev); if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->hard_port_no])) { - printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n"); return 0; } @@ -565,7 +575,7 @@ static unsigned int piix_sata_probe (struct ata_port *ap) static int piix_sata_probe_reset(struct ata_port *ap, unsigned int *classes) { if (!piix_sata_probe(ap)) { - printk(KERN_INFO "ata%u: SATA port has no device.\n", ap->id); + ata_port_printk(ap, KERN_INFO, "SATA port has no device.\n"); return 0; } @@ -760,15 +770,15 @@ static int __devinit piix_check_450nx_errata(struct pci_dev *ata_dev) pci_read_config_byte(pdev, PCI_REVISION_ID, &rev); pci_read_config_word(pdev, 0x41, &cfg); /* Only on the original revision: IDE DMA can hang */ - if(rev == 0x00) + if (rev == 0x00) no_piix_dma = 1; /* On all revisions below 5 PXB bus lock must be disabled for IDE */ - else if(cfg & (1<<14) && rev < 5) + else if (cfg & (1<<14) && rev < 5) no_piix_dma = 2; } - if(no_piix_dma) + if (no_piix_dma) dev_printk(KERN_WARNING, &ata_dev->dev, "450NX errata present, disabling IDE DMA.\n"); - if(no_piix_dma == 2) + if (no_piix_dma == 2) dev_printk(KERN_WARNING, &ata_dev->dev, "A BIOS update may resolve this.\n"); return no_piix_dma; } |