diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_init.c')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_init.c | 59 |
1 files changed, 42 insertions, 17 deletions
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index f8271a587aa..900b5628ceb 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -211,7 +211,7 @@ lpfc_config_port_prep(struct lpfc_hba *phba) goto out_free_mbox; do { - lpfc_dump_mem(phba, pmb, offset); + lpfc_dump_mem(phba, pmb, offset, DMP_REGION_VPD); rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); if (rc != MBX_SUCCESS) { @@ -425,6 +425,9 @@ lpfc_config_port_post(struct lpfc_hba *phba) return -EIO; } + /* Check if the port is disabled */ + lpfc_sli_read_link_ste(phba); + /* Reset the DFT_HBA_Q_DEPTH to the max xri */ if (phba->cfg_hba_queue_depth > (mb->un.varRdConfig.max_xri+1)) phba->cfg_hba_queue_depth = @@ -524,27 +527,49 @@ lpfc_config_port_post(struct lpfc_hba *phba) /* Set up error attention (ERATT) polling timer */ mod_timer(&phba->eratt_poll, jiffies + HZ * LPFC_ERATT_POLL_INTERVAL); - lpfc_init_link(phba, pmb, phba->cfg_topology, phba->cfg_link_speed); - pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; - lpfc_set_loopback_flag(phba); - rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT); - if (rc != MBX_SUCCESS) { - lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + /* Check if the port is disabled */ + lpfc_sli_read_serdes_param(phba); + + if (phba->hba_flag & LINK_DISABLED) { + lpfc_printf_log(phba, + KERN_ERR, LOG_INIT, + "2598 Adapter Link is disabled.\n"); + lpfc_down_link(phba, pmb); + pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; + rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT); + if ((rc != MBX_SUCCESS) && (rc != MBX_BUSY)) { + lpfc_printf_log(phba, + KERN_ERR, LOG_INIT, + "2599 Adapter failed to issue DOWN_LINK" + " mbox command rc 0x%x\n", rc); + + mempool_free(pmb, phba->mbox_mem_pool); + return -EIO; + } + } else { + lpfc_init_link(phba, pmb, phba->cfg_topology, + phba->cfg_link_speed); + pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; + lpfc_set_loopback_flag(phba); + rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT); + if (rc != MBX_SUCCESS) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0454 Adapter failed to init, mbxCmd x%x " "INIT_LINK, mbxStatus x%x\n", mb->mbxCommand, mb->mbxStatus); - /* Clear all interrupt enable conditions */ - writel(0, phba->HCregaddr); - readl(phba->HCregaddr); /* flush */ - /* Clear all pending interrupts */ - writel(0xffffffff, phba->HAregaddr); - readl(phba->HAregaddr); /* flush */ + /* Clear all interrupt enable conditions */ + writel(0, phba->HCregaddr); + readl(phba->HCregaddr); /* flush */ + /* Clear all pending interrupts */ + writel(0xffffffff, phba->HAregaddr); + readl(phba->HAregaddr); /* flush */ - phba->link_state = LPFC_HBA_ERROR; - if (rc != MBX_BUSY) - mempool_free(pmb, phba->mbox_mem_pool); - return -EIO; + phba->link_state = LPFC_HBA_ERROR; + if (rc != MBX_BUSY) + mempool_free(pmb, phba->mbox_mem_pool); + return -EIO; + } } /* MBOX buffer will be freed in mbox compl */ pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); |