aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/qla2xxx/qla_def.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_def.h')
-rw-r--r--drivers/scsi/qla2xxx/qla_def.h136
1 files changed, 39 insertions, 97 deletions
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index e0c5bb54b25..714ee67567e 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -176,8 +176,7 @@
/* ISP request and response entry counts (37-65535) */
#define REQUEST_ENTRY_CNT_2100 128 /* Number of request entries. */
#define REQUEST_ENTRY_CNT_2200 2048 /* Number of request entries. */
-#define REQUEST_ENTRY_CNT_2XXX_EXT_MEM 4096 /* Number of request entries. */
-#define REQUEST_ENTRY_CNT_24XX 4096 /* Number of request entries. */
+#define REQUEST_ENTRY_CNT_24XX 2048 /* Number of request entries. */
#define RESPONSE_ENTRY_CNT_2100 64 /* Number of response entries.*/
#define RESPONSE_ENTRY_CNT_2300 512 /* Number of response entries.*/
@@ -201,20 +200,7 @@ typedef struct srb {
/*
* SRB flag definitions
*/
-#define SRB_TIMEOUT BIT_0 /* Command timed out */
-#define SRB_DMA_VALID BIT_1 /* Command sent to ISP */
-#define SRB_WATCHDOG BIT_2 /* Command on watchdog list */
-#define SRB_ABORT_PENDING BIT_3 /* Command abort sent to device */
-
-#define SRB_ABORTED BIT_4 /* Command aborted command already */
-#define SRB_RETRY BIT_5 /* Command needs retrying */
-#define SRB_GOT_SENSE BIT_6 /* Command has sense data */
-#define SRB_FAILOVER BIT_7 /* Command in failover state */
-
-#define SRB_BUSY BIT_8 /* Command is in busy retry state */
-#define SRB_FO_CANCEL BIT_9 /* Command don't need to do failover */
-#define SRB_IOCTL BIT_10 /* IOCTL command. */
-#define SRB_TAPE BIT_11 /* FCP2 (Tape) command. */
+#define SRB_DMA_VALID BIT_0 /* Command sent to ISP */
/*
* ISP I/O Register Set structure definitions.
@@ -372,10 +358,10 @@ struct device_reg_2xxx {
};
struct device_reg_25xxmq {
- volatile uint32_t req_q_in;
- volatile uint32_t req_q_out;
- volatile uint32_t rsp_q_in;
- volatile uint32_t rsp_q_out;
+ uint32_t req_q_in;
+ uint32_t req_q_out;
+ uint32_t rsp_q_in;
+ uint32_t rsp_q_out;
};
typedef union {
@@ -620,6 +606,7 @@ typedef struct {
#define MBC_GET_TIMEOUT_PARAMS 0x22 /* Get FW timeouts. */
#define MBC_TRACE_CONTROL 0x27 /* Trace control command. */
#define MBC_GEN_SYSTEM_ERROR 0x2a /* Generate System Error. */
+#define MBC_WRITE_SFP 0x30 /* Write SFP Data. */
#define MBC_READ_SFP 0x31 /* Read SFP Data. */
#define MBC_SET_TIMEOUT_PARAMS 0x32 /* Set FW timeouts. */
#define MBC_MID_INITIALIZE_FIRMWARE 0x48 /* MID Initialize firmware. */
@@ -1570,39 +1557,13 @@ typedef struct fc_port {
#define FCS_DEVICE_DEAD 2
#define FCS_DEVICE_LOST 3
#define FCS_ONLINE 4
-#define FCS_NOT_SUPPORTED 5
-#define FCS_FAILOVER 6
-#define FCS_FAILOVER_FAILED 7
/*
* FC port flags.
*/
#define FCF_FABRIC_DEVICE BIT_0
#define FCF_LOGIN_NEEDED BIT_1
-#define FCF_FO_MASKED BIT_2
-#define FCF_FAILOVER_NEEDED BIT_3
-#define FCF_RESET_NEEDED BIT_4
-#define FCF_PERSISTENT_BOUND BIT_5
-#define FCF_TAPE_PRESENT BIT_6
-#define FCF_FARP_DONE BIT_7
-#define FCF_FARP_FAILED BIT_8
-#define FCF_FARP_REPLY_NEEDED BIT_9
-#define FCF_AUTH_REQ BIT_10
-#define FCF_SEND_AUTH_REQ BIT_11
-#define FCF_RECEIVE_AUTH_REQ BIT_12
-#define FCF_AUTH_SUCCESS BIT_13
-#define FCF_RLC_SUPPORT BIT_14
-#define FCF_CONFIG BIT_15 /* Needed? */
-#define FCF_RESCAN_NEEDED BIT_16
-#define FCF_XP_DEVICE BIT_17
-#define FCF_MSA_DEVICE BIT_18
-#define FCF_EVA_DEVICE BIT_19
-#define FCF_MSA_PORT_ACTIVE BIT_20
-#define FCF_FAILBACK_DISABLE BIT_21
-#define FCF_FAILOVER_DISABLE BIT_22
-#define FCF_DSXXX_DEVICE BIT_23
-#define FCF_AA_EVA_DEVICE BIT_24
-#define FCF_AA_MSA_DEVICE BIT_25
+#define FCF_TAPE_PRESENT BIT_2
/* No loop ID flag. */
#define FC_NO_LOOP_ID 0x1000
@@ -2102,9 +2063,6 @@ struct isp_operations {
int (*get_flash_version) (struct scsi_qla_host *, void *);
int (*start_scsi) (srb_t *);
- void (*wrt_req_reg) (struct qla_hw_data *, uint16_t, uint16_t);
- void (*wrt_rsp_reg) (struct qla_hw_data *, uint16_t, uint16_t);
- uint16_t (*rd_req_reg) (struct qla_hw_data *, uint16_t);
};
/* MSI-X Support *************************************************************/
@@ -2200,6 +2158,8 @@ struct rsp_que {
dma_addr_t dma;
response_t *ring;
response_t *ring_ptr;
+ uint32_t __iomem *rsp_q_in; /* FWI2-capable only. */
+ uint32_t __iomem *rsp_q_out;
uint16_t ring_index;
uint16_t out_ptr;
uint16_t length;
@@ -2217,6 +2177,8 @@ struct req_que {
dma_addr_t dma;
request_t *ring;
request_t *ring_ptr;
+ uint32_t __iomem *req_q_in; /* FWI2-capable only. */
+ uint32_t __iomem *req_q_out;
uint16_t ring_index;
uint16_t in_ptr;
uint16_t cnt;
@@ -2256,10 +2218,10 @@ struct qla_hw_data {
uint32_t msix_enabled :1;
uint32_t disable_serdes :1;
uint32_t gpsc_supported :1;
- uint32_t vsan_enabled :1;
uint32_t npiv_supported :1;
uint32_t fce_enabled :1;
- uint32_t hw_event_marker_found:1;
+ uint32_t fac_supported :1;
+ uint32_t chip_reset_done :1;
} flags;
/* This spinlock is used to protect "io transactions", you must
@@ -2277,7 +2239,7 @@ struct qla_hw_data {
#define MIN_IOBASE_LEN 0x100
/* Multi queue data structs */
- device_reg_t *mqiobase;
+ device_reg_t __iomem *mqiobase;
uint16_t msix_count;
uint8_t mqenable;
struct req_que **req_q_map;
@@ -2300,7 +2262,6 @@ struct qla_hw_data {
uint16_t max_loop_id;
uint16_t fb_rev;
- uint16_t max_public_loop_ids;
uint16_t min_external_loopid; /* First external loop Id */
#define PORT_SPEED_UNKNOWN 0xFFFF
@@ -2381,6 +2342,8 @@ struct qla_hw_data {
IS_QLA25XX(ha) || IS_QLA81XX(ha))
#define IS_NOPOLLING_TYPE(ha) ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && \
(ha)->flags.msix_enabled)
+#define IS_FAC_REQUIRED(ha) (IS_QLA81XX(ha))
+#define IS_NOCACHE_VPD_TYPE(ha) (IS_QLA81XX(ha))
#define IS_IIDMA_CAPABLE(ha) ((ha)->device_type & DT_IIDMA)
#define IS_FWI2_CAPABLE(ha) ((ha)->device_type & DT_FWI2)
@@ -2425,6 +2388,10 @@ struct qla_hw_data {
void *sfp_data;
dma_addr_t sfp_data_dma;
+ uint8_t *edc_data;
+ dma_addr_t edc_data_dma;
+ uint16_t edc_data_len;
+
struct task_struct *dpc_thread;
uint8_t dpc_active; /* DPC routine is active */
@@ -2439,6 +2406,8 @@ struct qla_hw_data {
dma_addr_t init_cb_dma;
init_cb_t *init_cb;
int init_cb_size;
+ dma_addr_t ex_init_cb_dma;
+ struct ex_init_cb_81xx *ex_init_cb;
/* These are used by mailbox operations. */
volatile uint16_t mailbox_out[MAILBOX_REGISTER_COUNT];
@@ -2453,15 +2422,6 @@ struct qla_hw_data {
struct completion mbx_cmd_comp; /* Serialize mbx access */
struct completion mbx_intr_comp; /* Used for completion notification */
- uint32_t mbx_flags;
-#define MBX_IN_PROGRESS BIT_0
-#define MBX_BUSY BIT_1 /* Got the Access */
-#define MBX_SLEEPING_ON_SEM BIT_2
-#define MBX_POLLING_FOR_COMP BIT_3
-#define MBX_COMPLETED BIT_4
-#define MBX_TIMEDOUT BIT_5
-#define MBX_ACCESS_TIMEDOUT BIT_6
-
/* Basic firmware related information. */
uint16_t fw_major_version;
uint16_t fw_minor_version;
@@ -2473,13 +2433,15 @@ struct qla_hw_data {
#define RISC_START_ADDRESS_2100 0x1000
#define RISC_START_ADDRESS_2300 0x800
#define RISC_START_ADDRESS_2400 0x100000
+ uint16_t fw_xcb_count;
uint16_t fw_options[16]; /* slots: 1,2,3,10,11 */
uint8_t fw_seriallink_options[4];
uint16_t fw_seriallink_options24[4];
- uint8_t mpi_version[4];
+ uint8_t mpi_version[3];
uint32_t mpi_capabilities;
+ uint8_t phy_version[3];
/* Firmware dump information. */
struct qla2xxx_fw_dump *fw_dump;
@@ -2545,6 +2507,8 @@ struct qla_hw_data {
uint32_t flt_region_boot;
uint32_t flt_region_fw;
uint32_t flt_region_vpd_nvram;
+ uint32_t flt_region_vpd;
+ uint32_t flt_region_nvram;
uint32_t flt_region_npiv_conf;
/* Needed for BEACON */
@@ -2613,36 +2577,19 @@ typedef struct scsi_qla_host {
#define LOOP_RESYNC_ACTIVE 5
#define LOCAL_LOOP_UPDATE 6 /* Perform a local loop update. */
#define RSCN_UPDATE 7 /* Perform an RSCN update. */
-#define MAILBOX_RETRY 8
-#define ISP_RESET_NEEDED 9 /* Initiate a ISP reset. */
-#define FAILOVER_EVENT_NEEDED 10
-#define FAILOVER_EVENT 11
-#define FAILOVER_NEEDED 12
-#define SCSI_RESTART_NEEDED 13 /* Processes SCSI retry queue. */
-#define PORT_RESTART_NEEDED 14 /* Processes Retry queue. */
-#define RESTART_QUEUES_NEEDED 15 /* Restarts the Lun queue. */
-#define ABORT_QUEUES_NEEDED 16
-#define RELOGIN_NEEDED 17
-#define LOGIN_RETRY_NEEDED 18 /* Initiate required fabric logins. */
-#define REGISTER_FC4_NEEDED 19 /* SNS FC4 registration required. */
-#define ISP_ABORT_RETRY 20 /* ISP aborted. */
-#define FCPORT_RESCAN_NEEDED 21 /* IO descriptor processing needed */
-#define IODESC_PROCESS_NEEDED 22 /* IO descriptor processing needed */
-#define IOCTL_ERROR_RECOVERY 23
-#define LOOP_RESET_NEEDED 24
-#define BEACON_BLINK_NEEDED 25
-#define REGISTER_FDMI_NEEDED 26
-#define FCPORT_UPDATE_NEEDED 27
-#define VP_DPC_NEEDED 28 /* wake up for VP dpc handling */
-#define UNLOADING 29
-#define NPIV_CONFIG_NEEDED 30
+#define RELOGIN_NEEDED 8
+#define REGISTER_FC4_NEEDED 9 /* SNS FC4 registration required. */
+#define ISP_ABORT_RETRY 10 /* ISP aborted. */
+#define BEACON_BLINK_NEEDED 11
+#define REGISTER_FDMI_NEEDED 12
+#define FCPORT_UPDATE_NEEDED 13
+#define VP_DPC_NEEDED 14 /* wake up for VP dpc handling */
+#define UNLOADING 15
+#define NPIV_CONFIG_NEEDED 16
uint32_t device_flags;
-#define DFLG_LOCAL_DEVICES BIT_0
-#define DFLG_RETRY_LOCAL_DEVICES BIT_1
-#define DFLG_FABRIC_DEVICES BIT_2
-#define SWITCH_FOUND BIT_3
-#define DFLG_NO_CABLE BIT_4
+#define SWITCH_FOUND BIT_0
+#define DFLG_NO_CABLE BIT_1
srb_t *status_srb; /* Status continuation entry. */
@@ -2755,10 +2702,5 @@ typedef struct scsi_qla_host {
#include "qla_inline.h"
#define CMD_SP(Cmnd) ((Cmnd)->SCp.ptr)
-#define CMD_COMPL_STATUS(Cmnd) ((Cmnd)->SCp.this_residual)
-#define CMD_RESID_LEN(Cmnd) ((Cmnd)->SCp.buffers_residual)
-#define CMD_SCSI_STATUS(Cmnd) ((Cmnd)->SCp.Status)
-#define CMD_ACTUAL_SNSLEN(Cmnd) ((Cmnd)->SCp.Message)
-#define CMD_ENTRY_STATUS(Cmnd) ((Cmnd)->SCp.have_data_in)
#endif