aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/qla2xxx/qla_def.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_def.h')
-rw-r--r--drivers/scsi/qla2xxx/qla_def.h42
1 files changed, 21 insertions, 21 deletions
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 7c1618019c4..bd87d5f1ffb 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -116,7 +116,7 @@
#include "qla_settings.h"
-/*
+/*
* Data bit definitions
*/
#define BIT_0 0x1
@@ -194,8 +194,8 @@
#define MAX_TARGETS MAX_FIBRE_DEVICES
#define MIN_LUNS 8
#define MAX_LUNS MAX_FIBRE_LUNS
-#define MAX_CMDS_PER_LUN 255
-
+#define MAX_CMDS_PER_LUN 255
+
/*
* Fibre Channel device definitions.
*/
@@ -243,7 +243,7 @@
#define RESPONSE_ENTRY_CNT_2300 512 /* Number of response entries.*/
/*
- * SCSI Request Block
+ * SCSI Request Block
*/
typedef struct srb {
struct list_head list;
@@ -254,7 +254,7 @@ typedef struct srb {
struct scsi_cmnd *cmd; /* Linux SCSI command pkt */
struct timer_list timer; /* Command timer */
- atomic_t ref_count; /* Reference count for this structure */
+ atomic_t ref_count; /* Reference count for this structure */
uint16_t flags;
/* Request state */
@@ -312,7 +312,7 @@ struct device_reg_2xxx {
uint16_t flash_data; /* Flash BIOS data */
uint16_t unused_1[1]; /* Gap */
uint16_t ctrl_status; /* Control/Status */
-#define CSR_FLASH_64K_BANK BIT_3 /* Flash upper 64K bank select */
+#define CSR_FLASH_64K_BANK BIT_3 /* Flash upper 64K bank select */
#define CSR_FLASH_ENABLE BIT_1 /* Flash BIOS Read/Write enable */
#define CSR_ISP_SOFT_RESET BIT_0 /* ISP soft reset */
@@ -355,12 +355,12 @@ struct device_reg_2xxx {
uint16_t rsp_q_out; /* Out-Pointer */
/* RISC to Host Status */
- uint32_t host_status;
+ uint32_t host_status;
#define HSR_RISC_INT BIT_15 /* RISC interrupt */
#define HSR_RISC_PAUSED BIT_8 /* RISC Paused */
/* Host to Host Semaphore */
- uint16_t host_semaphore;
+ uint16_t host_semaphore;
uint16_t unused_3[17]; /* Gap */
uint16_t mailbox0;
uint16_t mailbox1;
@@ -1057,7 +1057,7 @@ typedef struct {
* LSB BIT 5 = Rx Sensitivity 1G bit 1
* LSB BIT 6 = Rx Sensitivity 1G bit 2
* LSB BIT 7 = Rx Sensitivity 1G bit 3
- *
+ *
* MSB BIT 0 = Tx Sensitivity 2G bit 0
* MSB BIT 1 = Tx Sensitivity 2G bit 1
* MSB BIT 2 = Tx Sensitivity 2G bit 2
@@ -1075,7 +1075,7 @@ typedef struct {
* LSB BIT 5 = Output Swing 2G bit 0
* LSB BIT 6 = Output Swing 2G bit 1
* LSB BIT 7 = Output Swing 2G bit 2
- *
+ *
* MSB BIT 0 = Output Emphasis 2G bit 0
* MSB BIT 1 = Output Emphasis 2G bit 1
* MSB BIT 2 = Output Enable
@@ -1997,7 +1997,7 @@ struct qla_board_info {
struct gid_list_info {
uint8_t al_pa;
uint8_t area;
- uint8_t domain;
+ uint8_t domain;
uint8_t loop_id_2100; /* ISP2100/ISP2200 -- 4 bytes. */
uint16_t loop_id; /* ISP23XX -- 6 bytes. */
uint16_t reserved_1; /* ISP24XX -- 8 bytes. */
@@ -2111,7 +2111,7 @@ typedef struct scsi_qla_host {
#define ISP_ABORT_RETRY 20 /* ISP aborted. */
#define FCPORT_RESCAN_NEEDED 21 /* IO descriptor processing needed */
#define IODESC_PROCESS_NEEDED 22 /* IO descriptor processing needed */
-#define IOCTL_ERROR_RECOVERY 23
+#define IOCTL_ERROR_RECOVERY 23
#define LOOP_RESET_NEEDED 24
#define BEACON_BLINK_NEEDED 25
@@ -2126,7 +2126,7 @@ typedef struct scsi_qla_host {
#define SRB_MIN_REQ 128
mempool_t *srb_mempool;
- /* This spinlock is used to protect "io transactions", you must
+ /* This spinlock is used to protect "io transactions", you must
* aquire it before doing any IO to the card, eg with RD_REG*() and
* WRT_REG*() for the duration of your entire commandtransaction.
*
@@ -2153,12 +2153,12 @@ typedef struct scsi_qla_host {
response_t *response_ring_ptr; /* Current address. */
uint16_t rsp_ring_index; /* Current index. */
uint16_t response_q_length;
-
+
struct isp_operations isp_ops;
/* Outstandings ISP commands. */
srb_t *outstanding_cmds[MAX_OUTSTANDING_COMMANDS];
- uint32_t current_outstanding_cmd;
+ uint32_t current_outstanding_cmd;
srb_t *status_srb; /* Status continuation entry. */
uint16_t revision;
@@ -2187,7 +2187,7 @@ typedef struct scsi_qla_host {
#define LOOP_P2P 2
#define P2P_LOOP 3
- uint8_t marker_needed;
+ uint8_t marker_needed;
uint8_t interrupts_on;
@@ -2208,7 +2208,7 @@ typedef struct scsi_qla_host {
uint8_t mbx_count;
uint16_t last_loop_id;
- uint32_t login_retry_count;
+ uint32_t login_retry_count;
/* Fibre Channel Device List. */
struct list_head fcports;
@@ -2253,7 +2253,7 @@ typedef struct scsi_qla_host {
dma_addr_t rlc_rsp_dma;
rpt_lun_cmd_rsp_t *rlc_rsp;
- /* Small DMA pool allocations -- maximum 256 bytes in length. */
+ /* Small DMA pool allocations -- maximum 256 bytes in length. */
#define DMA_POOL_SIZE 256
struct dma_pool *s_dma_pool;
@@ -2281,10 +2281,10 @@ typedef struct scsi_qla_host {
uint32_t mbx_flags;
#define MBX_IN_PROGRESS BIT_0
#define MBX_BUSY BIT_1 /* Got the Access */
-#define MBX_SLEEPING_ON_SEM BIT_2
+#define MBX_SLEEPING_ON_SEM BIT_2
#define MBX_POLLING_FOR_COMP BIT_3
#define MBX_COMPLETED BIT_4
-#define MBX_TIMEDOUT BIT_5
+#define MBX_TIMEDOUT BIT_5
#define MBX_ACCESS_TIMEDOUT BIT_6
mbx_cmd_t mc;
@@ -2345,7 +2345,7 @@ typedef struct scsi_qla_host {
test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) || \
test_bit(LOOP_RESYNC_ACTIVE, &ha->dpc_flags)) || \
atomic_read(&ha->loop_state) == LOOP_DOWN)
-
+
#define LOOP_RDY(ha) (!LOOP_NOT_READY(ha))
#define TGT_Q(ha, t) (ha->otgt[t])