4 files changed, 52 insertions, 118 deletions

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 285c8e8ff1a..7b18a6c7b7e 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -390,7 +390,7 @@ static struct sysfs_entry {
 	{ "optrom_ctl", &sysfs_optrom_ctl_attr, },
 	{ "vpd", &sysfs_vpd_attr, 1 },
 	{ "sfp", &sysfs_sfp_attr, 1 },
-	{ 0 },
+	{ NULL },
 };
 
 void
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 08cb5e3fb55..a823f0bc519 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -59,9 +59,6 @@ int
 qla2x00_initialize_adapter(scsi_qla_host_t *ha)
 {
 	int	rval;
-	uint8_t	restart_risc = 0;
-	uint8_t	retry;
-	uint32_t wait_time;
 
 	/* Clear adapter flags. */
 	ha->flags.online = 0;
@@ -104,87 +101,15 @@ qla2x00_initialize_adapter(scsi_qla_host_t *ha)
 
 	qla_printk(KERN_INFO, ha, "Verifying loaded RISC code...\n");
 
-	retry = 10;
-	/*
-	 * Try to configure the loop.
-	 */
-	do {
-		restart_risc = 0;
-
-		/* If firmware needs to be loaded */
-		if (qla2x00_isp_firmware(ha) != QLA_SUCCESS) {
-			if ((rval = ha->isp_ops.chip_diag(ha)) == QLA_SUCCESS) {
-				rval = qla2x00_setup_chip(ha);
-			}
-		}
-
-		if (rval == QLA_SUCCESS &&
-		    (rval = qla2x00_init_rings(ha)) == QLA_SUCCESS) {
-check_fw_ready_again:
-			/*
-			 * Wait for a successful LIP up to a maximum
-			 * of (in seconds): RISC login timeout value,
-			 * RISC retry count value, and port down retry
-			 * value OR a minimum of 4 seconds OR If no
-			 * cable, only 5 seconds.
-			 */
-			rval = qla2x00_fw_ready(ha);
-			if (rval == QLA_SUCCESS) {
-				clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
-
-				/* Issue a marker after FW becomes ready. */
-				qla2x00_marker(ha, 0, 0, MK_SYNC_ALL);
-
-				/*
-				 * Wait at most MAX_TARGET RSCNs for a stable
-				 * link.
-				 */
-				wait_time = 256;
-				do {
-					clear_bit(LOOP_RESYNC_NEEDED,
-					    &ha->dpc_flags);
-					rval = qla2x00_configure_loop(ha);
-
-					if (test_and_clear_bit(ISP_ABORT_NEEDED,
-					    &ha->dpc_flags)) {
-						restart_risc = 1;
-						break;
-					}
-
-					/*
-					 * If loop state change while we were
-					 * discoverying devices then wait for
-					 * LIP to complete
-					 */
-
-					if (atomic_read(&ha->loop_state) !=
-					    LOOP_READY && retry--) {
-						goto check_fw_ready_again;
-					}
-					wait_time--;
-				} while (!atomic_read(&ha->loop_down_timer) &&
-				    retry &&
-				    wait_time &&
-				    (test_bit(LOOP_RESYNC_NEEDED,
-					&ha->dpc_flags)));
-
-				if (wait_time == 0)
-					rval = QLA_FUNCTION_FAILED;
-			} else if (ha->device_flags & DFLG_NO_CABLE)
-				/* If no cable, then all is good. */
-				rval = QLA_SUCCESS;
-		}
-	} while (restart_risc && retry--);
-
-	if (rval == QLA_SUCCESS) {
-		clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
-		qla2x00_marker(ha, 0, 0, MK_SYNC_ALL);
-		ha->marker_needed = 0;
-
-		ha->flags.online = 1;
-	} else {
-		DEBUG2_3(printk("%s(): **** FAILED ****\n", __func__));
+	if (qla2x00_isp_firmware(ha) != QLA_SUCCESS) {
+		rval = ha->isp_ops.chip_diag(ha);
+		if (rval)
+			return (rval);
+		rval = qla2x00_setup_chip(ha);
+		if (rval)
+			return (rval);
 	}
+	rval = qla2x00_init_rings(ha);
 
 	return (rval);
 }
@@ -2208,8 +2133,7 @@ qla2x00_update_fcport(scsi_qla_host_t *ha, fc_port_t *fcport)
 
 	atomic_set(&fcport->state, FCS_ONLINE);
 
-	if (ha->flags.init_done)
-		qla2x00_reg_remote_port(ha, fcport);
+	qla2x00_reg_remote_port(ha, fcport);
 }
 
 void
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 208607be78c..cbe0cad83b6 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -95,6 +95,8 @@ MODULE_PARM_DESC(ql2xqfullrampup,
  */
 static int qla2xxx_slave_configure(struct scsi_device * device);
 static int qla2xxx_slave_alloc(struct scsi_device *);
+static int qla2xxx_scan_finished(struct Scsi_Host *, unsigned long time);
+static void qla2xxx_scan_start(struct Scsi_Host *);
 static void qla2xxx_slave_destroy(struct scsi_device *);
 static int qla2x00_queuecommand(struct scsi_cmnd *cmd,
 		void (*fn)(struct scsi_cmnd *));
@@ -124,6 +126,8 @@ static struct scsi_host_template qla2x00_driver_template = {
 
 	.slave_alloc		= qla2xxx_slave_alloc,
 	.slave_destroy		= qla2xxx_slave_destroy,
+	.scan_finished		= qla2xxx_scan_finished,
+	.scan_start		= qla2xxx_scan_start,
 	.change_queue_depth	= qla2x00_change_queue_depth,
 	.change_queue_type	= qla2x00_change_queue_type,
 	.this_id		= -1,
@@ -287,7 +291,7 @@ qla24xx_pci_info_str(struct scsi_qla_host *ha, char *str)
 	return str;
 }
 
-char *
+static char *
 qla2x00_fw_version_str(struct scsi_qla_host *ha, char *str)
 {
 	char un_str[10];
@@ -325,7 +329,7 @@ qla2x00_fw_version_str(struct scsi_qla_host *ha, char *str)
 	return (str);
 }
 
-char *
+static char *
 qla24xx_fw_version_str(struct scsi_qla_host *ha, char *str)
 {
 	sprintf(str, "%d.%02d.%02d ", ha->fw_major_version,
@@ -634,7 +638,7 @@ qla2x00_block_error_handler(struct scsi_cmnd *cmnd)
 * Note:
 *    Only return FAILED if command not returned by firmware.
 **************************************************************************/
-int
+static int
 qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 {
 	scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
@@ -771,7 +775,7 @@ qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t)
 *    SUCCESS/FAILURE (defined as macro in scsi.h).
 *
 **************************************************************************/
-int
+static int
 qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
 {
 	scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
@@ -902,7 +906,7 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha)
 *    SUCCESS/FAILURE (defined as macro in scsi.h).
 *
 **************************************************************************/
-int
+static int
 qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
 {
 	scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
@@ -963,7 +967,7 @@ eh_bus_reset_done:
 *
 * Note:
 **************************************************************************/
-int
+static int
 qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
 {
 	scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
@@ -1366,6 +1370,29 @@ qla24xx_disable_intrs(scsi_qla_host_t *ha)
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 }
 
+static void
+qla2xxx_scan_start(struct Scsi_Host *shost)
+{
+	scsi_qla_host_t *ha = (scsi_qla_host_t *)shost->hostdata;
+
+	set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
+	set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags);
+	set_bit(RSCN_UPDATE, &ha->dpc_flags);
+}
+
+static int
+qla2xxx_scan_finished(struct Scsi_Host *shost, unsigned long time)
+{
+	scsi_qla_host_t *ha = (scsi_qla_host_t *)shost->hostdata;
+
+	if (!ha->host)
+		return 1;
+	if (time > ha->loop_reset_delay * HZ)
+		return 1;
+
+	return atomic_read(&ha->loop_state) == LOOP_READY;
+}
+
 /*
  * PCI driver interface
  */
@@ -1377,10 +1404,8 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	struct Scsi_Host *host;
 	scsi_qla_host_t *ha;
 	unsigned long	flags = 0;
-	unsigned long	wait_switch = 0;
 	char pci_info[20];
 	char fw_str[30];
-	fc_port_t *fcport;
 	struct scsi_host_template *sht;
 
 	if (pci_enable_device(pdev))
@@ -1631,30 +1656,19 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	ha->isp_ops.enable_intrs(ha);
 
-	/* v2.19.5b6 */
-	/*
-	 * Wait around max loop_reset_delay secs for the devices to come
-	 * on-line. We don't want Linux scanning before we are ready.
-	 *
-	 */
-	for (wait_switch = jiffies + (ha->loop_reset_delay * HZ);
-	    time_before(jiffies,wait_switch) &&
-	     !(ha->device_flags & (DFLG_NO_CABLE | DFLG_FABRIC_DEVICES))
-	     && (ha->device_flags & SWITCH_FOUND) ;) {
-
-		qla2x00_check_fabric_devices(ha);
-
-		msleep(10);
-	}
-
 	pci_set_drvdata(pdev, ha);
+
 	ha->flags.init_done = 1;
+	ha->flags.online = 1;
+
 	num_hosts++;
 
 	ret = scsi_add_host(host, &pdev->dev);
 	if (ret)
 		goto probe_failed;
 
+	scsi_scan_host(host);
+
 	qla2x00_alloc_sysfs_attr(ha);
 
 	qla2x00_init_host_attr(ha);
@@ -1669,10 +1683,6 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	    ha->flags.enable_64bit_addressing ? '+': '-', ha->host_no,
 	    ha->isp_ops.fw_version_str(ha, fw_str));
 
-	/* Go with fc_rport registration. */
-	list_for_each_entry(fcport, &ha->fcports, list)
-		qla2x00_reg_remote_port(ha, fcport);
-
 	return 0;
 
 probe_failed:
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index c71dbd5bd54..15390ad8745 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -449,7 +449,7 @@ nvram_data_to_access_addr(uint32_t naddr)
 	return FARX_ACCESS_NVRAM_DATA | naddr;
 }
 
-uint32_t
+static uint32_t
 qla24xx_read_flash_dword(scsi_qla_host_t *ha, uint32_t addr)
 {
 	int rval;
@@ -490,7 +490,7 @@ qla24xx_read_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
 	return dwptr;
 }
 
-int
+static int
 qla24xx_write_flash_dword(scsi_qla_host_t *ha, uint32_t addr, uint32_t data)
 {
 	int rval;
@@ -512,7 +512,7 @@ qla24xx_write_flash_dword(scsi_qla_host_t *ha, uint32_t addr, uint32_t data)
 	return rval;
 }
 
-void
+static void
 qla24xx_get_flash_manufacturer(scsi_qla_host_t *ha, uint8_t *man_id,
     uint8_t *flash_id)
 {
@@ -537,7 +537,7 @@ qla24xx_get_flash_manufacturer(scsi_qla_host_t *ha, uint8_t *man_id,
 	}
 }
 
-int
+static int
 qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
     uint32_t dwords)
 {