aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/sata_svw.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/sata_svw.c')
-rw-r--r--drivers/scsi/sata_svw.c483
1 files changed, 483 insertions, 0 deletions
diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
new file mode 100644
index 00000000000..8d1a5d25c05
--- /dev/null
+++ b/drivers/scsi/sata_svw.c
@@ -0,0 +1,483 @@
+/*
+ * sata_svw.c - ServerWorks / Apple K2 SATA
+ *
+ * Maintained by: Benjamin Herrenschmidt <benh@kernel.crashing.org> and
+ * Jeff Garzik <jgarzik@pobox.com>
+ * Please ALWAYS copy linux-ide@vger.kernel.org
+ * on emails.
+ *
+ * Copyright 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ *
+ * Bits from Jeff Garzik, Copyright RedHat, Inc.
+ *
+ * This driver probably works with non-Apple versions of the
+ * Broadcom chipset...
+ *
+ * The contents of this file are subject to the Open
+ * Software License version 1.1 that can be found at
+ * http://www.opensource.org/licenses/osl-1.1.txt and is included herein
+ * by reference.
+ *
+ * Alternatively, the contents of this file may be used under the terms
+ * of the GNU General Public License version 2 (the "GPL") as distributed
+ * in the kernel source COPYING file, in which case the provisions of
+ * the GPL are applicable instead of the above. If you wish to allow
+ * the use of your version of this file only under the terms of the
+ * GPL and not to allow others to use your version of this file under
+ * the OSL, indicate your decision by deleting the provisions above and
+ * replace them with the notice and other provisions required by the GPL.
+ * If you do not delete the provisions above, a recipient may use your
+ * version of this file under either the OSL or the GPL.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include "scsi.h"
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#ifdef CONFIG_PPC_OF
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#endif /* CONFIG_PPC_OF */
+
+#define DRV_NAME "sata_svw"
+#define DRV_VERSION "1.05"
+
+/* Taskfile registers offsets */
+#define K2_SATA_TF_CMD_OFFSET 0x00
+#define K2_SATA_TF_DATA_OFFSET 0x00
+#define K2_SATA_TF_ERROR_OFFSET 0x04
+#define K2_SATA_TF_NSECT_OFFSET 0x08
+#define K2_SATA_TF_LBAL_OFFSET 0x0c
+#define K2_SATA_TF_LBAM_OFFSET 0x10
+#define K2_SATA_TF_LBAH_OFFSET 0x14
+#define K2_SATA_TF_DEVICE_OFFSET 0x18
+#define K2_SATA_TF_CMDSTAT_OFFSET 0x1c
+#define K2_SATA_TF_CTL_OFFSET 0x20
+
+/* DMA base */
+#define K2_SATA_DMA_CMD_OFFSET 0x30
+
+/* SCRs base */
+#define K2_SATA_SCR_STATUS_OFFSET 0x40
+#define K2_SATA_SCR_ERROR_OFFSET 0x44
+#define K2_SATA_SCR_CONTROL_OFFSET 0x48
+
+/* Others */
+#define K2_SATA_SICR1_OFFSET 0x80
+#define K2_SATA_SICR2_OFFSET 0x84
+#define K2_SATA_SIM_OFFSET 0x88
+
+/* Port stride */
+#define K2_SATA_PORT_OFFSET 0x100
+
+
+static u32 k2_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
+{
+ if (sc_reg > SCR_CONTROL)
+ return 0xffffffffU;
+ return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4));
+}
+
+
+static void k2_sata_scr_write (struct ata_port *ap, unsigned int sc_reg,
+ u32 val)
+{
+ if (sc_reg > SCR_CONTROL)
+ return;
+ writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4));
+}
+
+
+static void k2_sata_tf_load(struct ata_port *ap, struct ata_taskfile *tf)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+ unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+
+ if (tf->ctl != ap->last_ctl) {
+ writeb(tf->ctl, ioaddr->ctl_addr);
+ ap->last_ctl = tf->ctl;
+ ata_wait_idle(ap);
+ }
+ if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+ writew(tf->feature | (((u16)tf->hob_feature) << 8), ioaddr->feature_addr);
+ writew(tf->nsect | (((u16)tf->hob_nsect) << 8), ioaddr->nsect_addr);
+ writew(tf->lbal | (((u16)tf->hob_lbal) << 8), ioaddr->lbal_addr);
+ writew(tf->lbam | (((u16)tf->hob_lbam) << 8), ioaddr->lbam_addr);
+ writew(tf->lbah | (((u16)tf->hob_lbah) << 8), ioaddr->lbah_addr);
+ } else if (is_addr) {
+ writew(tf->feature, ioaddr->feature_addr);
+ writew(tf->nsect, ioaddr->nsect_addr);
+ writew(tf->lbal, ioaddr->lbal_addr);
+ writew(tf->lbam, ioaddr->lbam_addr);
+ writew(tf->lbah, ioaddr->lbah_addr);
+ }
+
+ if (tf->flags & ATA_TFLAG_DEVICE)
+ writeb(tf->device, ioaddr->device_addr);
+
+ ata_wait_idle(ap);
+}
+
+
+static void k2_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+ u16 nsect, lbal, lbam, lbah;
+
+ nsect = tf->nsect = readw(ioaddr->nsect_addr);
+ lbal = tf->lbal = readw(ioaddr->lbal_addr);
+ lbam = tf->lbam = readw(ioaddr->lbam_addr);
+ lbah = tf->lbah = readw(ioaddr->lbah_addr);
+ tf->device = readw(ioaddr->device_addr);
+
+ if (tf->flags & ATA_TFLAG_LBA48) {
+ tf->hob_feature = readw(ioaddr->error_addr) >> 8;
+ tf->hob_nsect = nsect >> 8;
+ tf->hob_lbal = lbal >> 8;
+ tf->hob_lbam = lbam >> 8;
+ tf->hob_lbah = lbah >> 8;
+ }
+}
+
+/**
+ * k2_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction (MMIO)
+ * @qc: Info associated with this ATA transaction.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+
+static void k2_bmdma_setup_mmio (struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
+ u8 dmactl;
+ void *mmio = (void *) ap->ioaddr.bmdma_addr;
+ /* load PRD table addr. */
+ mb(); /* make sure PRD table writes are visible to controller */
+ writel(ap->prd_dma, mmio + ATA_DMA_TABLE_OFS);
+
+ /* specify data direction, triple-check start bit is clear */
+ dmactl = readb(mmio + ATA_DMA_CMD);
+ dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
+ if (!rw)
+ dmactl |= ATA_DMA_WR;
+ writeb(dmactl, mmio + ATA_DMA_CMD);
+
+ /* issue r/w command if this is not a ATA DMA command*/
+ if (qc->tf.protocol != ATA_PROT_DMA)
+ ap->ops->exec_command(ap, &qc->tf);
+}
+
+/**
+ * k2_bmdma_start_mmio - Start a PCI IDE BMDMA transaction (MMIO)
+ * @qc: Info associated with this ATA transaction.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+
+static void k2_bmdma_start_mmio (struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ void *mmio = (void *) ap->ioaddr.bmdma_addr;
+ u8 dmactl;
+
+ /* start host DMA transaction */
+ dmactl = readb(mmio + ATA_DMA_CMD);
+ writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD);
+ /* There is a race condition in certain SATA controllers that can
+ be seen when the r/w command is given to the controller before the
+ host DMA is started. On a Read command, the controller would initiate
+ the command to the drive even before it sees the DMA start. When there
+ are very fast drives connected to the controller, or when the data request
+ hits in the drive cache, there is the possibility that the drive returns a part
+ or all of the requested data to the controller before the DMA start is issued.
+ In this case, the controller would become confused as to what to do with the data.
+ In the worst case when all the data is returned back to the controller, the
+ controller could hang. In other cases it could return partial data returning
+ in data corruption. This problem has been seen in PPC systems and can also appear
+ on an system with very fast disks, where the SATA controller is sitting behind a
+ number of bridges, and hence there is significant latency between the r/w command
+ and the start command. */
+ /* issue r/w command if the access is to ATA*/
+ if (qc->tf.protocol == ATA_PROT_DMA)
+ ap->ops->exec_command(ap, &qc->tf);
+}
+
+
+static u8 k2_stat_check_status(struct ata_port *ap)
+{
+ return readl((void *) ap->ioaddr.status_addr);
+}
+
+#ifdef CONFIG_PPC_OF
+/*
+ * k2_sata_proc_info
+ * inout : decides on the direction of the dataflow and the meaning of the
+ * variables
+ * buffer: If inout==FALSE data is being written to it else read from it
+ * *start: If inout==FALSE start of the valid data in the buffer
+ * offset: If inout==FALSE offset from the beginning of the imaginary file
+ * from which we start writing into the buffer
+ * length: If inout==FALSE max number of bytes to be written into the buffer
+ * else number of bytes in the buffer
+ */
+static int k2_sata_proc_info(struct Scsi_Host *shost, char *page, char **start,
+ off_t offset, int count, int inout)
+{
+ struct ata_port *ap;
+ struct device_node *np;
+ int len, index;
+
+ /* Find the ata_port */
+ ap = (struct ata_port *) &shost->hostdata[0];
+ if (ap == NULL)
+ return 0;
+
+ /* Find the OF node for the PCI device proper */
+ np = pci_device_to_OF_node(to_pci_dev(ap->host_set->dev));
+ if (np == NULL)
+ return 0;
+
+ /* Match it to a port node */
+ index = (ap == ap->host_set->ports[0]) ? 0 : 1;
+ for (np = np->child; np != NULL; np = np->sibling) {
+ u32 *reg = (u32 *)get_property(np, "reg", NULL);
+ if (!reg)
+ continue;
+ if (index == *reg)
+ break;
+ }
+ if (np == NULL)
+ return 0;
+
+ len = sprintf(page, "devspec: %s\n", np->full_name);
+
+ return len;
+}
+#endif /* CONFIG_PPC_OF */
+
+
+static Scsi_Host_Template k2_sata_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .eh_strategy_handler = ata_scsi_error,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .max_sectors = ATA_MAX_SECTORS,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+#ifdef CONFIG_PPC_OF
+ .proc_info = k2_sata_proc_info,
+#endif
+ .bios_param = ata_std_bios_param,
+ .ordered_flush = 1,
+};
+
+
+static struct ata_port_operations k2_sata_ops = {
+ .port_disable = ata_port_disable,
+ .tf_load = k2_sata_tf_load,
+ .tf_read = k2_sata_tf_read,
+ .check_status = k2_stat_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+ .phy_reset = sata_phy_reset,
+ .bmdma_setup = k2_bmdma_setup_mmio,
+ .bmdma_start = k2_bmdma_start_mmio,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .eng_timeout = ata_eng_timeout,
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+ .scr_read = k2_sata_scr_read,
+ .scr_write = k2_sata_scr_write,
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+};
+
+static void k2_sata_setup_port(struct ata_ioports *port, unsigned long base)
+{
+ port->cmd_addr = base + K2_SATA_TF_CMD_OFFSET;
+ port->data_addr = base + K2_SATA_TF_DATA_OFFSET;
+ port->feature_addr =
+ port->error_addr = base + K2_SATA_TF_ERROR_OFFSET;
+ port->nsect_addr = base + K2_SATA_TF_NSECT_OFFSET;
+ port->lbal_addr = base + K2_SATA_TF_LBAL_OFFSET;
+ port->lbam_addr = base + K2_SATA_TF_LBAM_OFFSET;
+ port->lbah_addr = base + K2_SATA_TF_LBAH_OFFSET;
+ port->device_addr = base + K2_SATA_TF_DEVICE_OFFSET;
+ port->command_addr =
+ port->status_addr = base + K2_SATA_TF_CMDSTAT_OFFSET;
+ port->altstatus_addr =
+ port->ctl_addr = base + K2_SATA_TF_CTL_OFFSET;
+ port->bmdma_addr = base + K2_SATA_DMA_CMD_OFFSET;
+ port->scr_addr = base + K2_SATA_SCR_STATUS_OFFSET;
+}
+
+
+static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ static int printed_version;
+ struct ata_probe_ent *probe_ent = NULL;
+ unsigned long base;
+ void *mmio_base;
+ int pci_dev_busy = 0;
+ int rc;
+
+ if (!printed_version++)
+ printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+
+ /*
+ * If this driver happens to only be useful on Apple's K2, then
+ * we should check that here as it has a normal Serverworks ID
+ */
+ rc = pci_enable_device(pdev);
+ if (rc)
+ return rc;
+ /*
+ * Check if we have resources mapped at all (second function may
+ * have been disabled by firmware)
+ */
+ if (pci_resource_len(pdev, 5) == 0)
+ return -ENODEV;
+
+ /* Request PCI regions */
+ rc = pci_request_regions(pdev, DRV_NAME);
+ if (rc) {
+ pci_dev_busy = 1;
+ goto err_out;
+ }
+
+ rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ goto err_out_regions;
+ rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ goto err_out_regions;
+
+ probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
+ if (probe_ent == NULL) {
+ rc = -ENOMEM;
+ goto err_out_regions;
+ }
+
+ memset(probe_ent, 0, sizeof(*probe_ent));
+ probe_ent->dev = pci_dev_to_dev(pdev);
+ INIT_LIST_HEAD(&probe_ent->node);
+
+ mmio_base = ioremap(pci_resource_start(pdev, 5),
+ pci_resource_len(pdev, 5));
+ if (mmio_base == NULL) {
+ rc = -ENOMEM;
+ goto err_out_free_ent;
+ }
+ base = (unsigned long) mmio_base;
+
+ /* Clear a magic bit in SCR1 according to Darwin, those help
+ * some funky seagate drives (though so far, those were already
+ * set by the firmware on the machines I had access to
+ */
+ writel(readl(mmio_base + K2_SATA_SICR1_OFFSET) & ~0x00040000,
+ mmio_base + K2_SATA_SICR1_OFFSET);
+
+ /* Clear SATA error & interrupts we don't use */
+ writel(0xffffffff, mmio_base + K2_SATA_SCR_ERROR_OFFSET);
+ writel(0x0, mmio_base + K2_SATA_SIM_OFFSET);
+
+ probe_ent->sht = &k2_sata_sht;
+ probe_ent->host_flags = ATA_FLAG_SATA | ATA_FLAG_SATA_RESET |
+ ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO;
+ probe_ent->port_ops = &k2_sata_ops;
+ probe_ent->n_ports = 4;
+ probe_ent->irq = pdev->irq;
+ probe_ent->irq_flags = SA_SHIRQ;
+ probe_ent->mmio_base = mmio_base;
+
+ /* We don't care much about the PIO/UDMA masks, but the core won't like us
+ * if we don't fill these
+ */
+ probe_ent->pio_mask = 0x1f;
+ probe_ent->mwdma_mask = 0x7;
+ probe_ent->udma_mask = 0x7f;
+
+ /* We have 4 ports per PCI function */
+ k2_sata_setup_port(&probe_ent->port[0], base + 0 * K2_SATA_PORT_OFFSET);
+ k2_sata_setup_port(&probe_ent->port[1], base + 1 * K2_SATA_PORT_OFFSET);
+ k2_sata_setup_port(&probe_ent->port[2], base + 2 * K2_SATA_PORT_OFFSET);
+ k2_sata_setup_port(&probe_ent->port[3], base + 3 * K2_SATA_PORT_OFFSET);
+
+ pci_set_master(pdev);
+
+ /* FIXME: check ata_device_add return value */
+ ata_device_add(probe_ent);
+ kfree(probe_ent);
+
+ return 0;
+
+err_out_free_ent:
+ kfree(probe_ent);
+err_out_regions:
+ pci_release_regions(pdev);
+err_out:
+ if (!pci_dev_busy)
+ pci_disable_device(pdev);
+ return rc;
+}
+
+
+static struct pci_device_id k2_sata_pci_tbl[] = {
+ { 0x1166, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { 0x1166, 0x0241, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { 0x1166, 0x0242, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { }
+};
+
+
+static struct pci_driver k2_sata_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = k2_sata_pci_tbl,
+ .probe = k2_sata_init_one,
+ .remove = ata_pci_remove_one,
+};
+
+
+static int __init k2_sata_init(void)
+{
+ return pci_module_init(&k2_sata_pci_driver);
+}
+
+
+static void __exit k2_sata_exit(void)
+{
+ pci_unregister_driver(&k2_sata_pci_driver);
+}
+
+
+MODULE_AUTHOR("Benjamin Herrenschmidt");
+MODULE_DESCRIPTION("low-level driver for K2 SATA controller");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, k2_sata_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(k2_sata_init);
+module_exit(k2_sata_exit);