diff options
Diffstat (limited to 'drivers/scsi')
-rw-r--r-- | drivers/scsi/BusLogic.c | 12 | ||||
-rw-r--r-- | drivers/scsi/Makefile | 2 | ||||
-rw-r--r-- | drivers/scsi/NCR53c406a.c | 5 | ||||
-rw-r--r-- | drivers/scsi/aha1740.c | 10 | ||||
-rw-r--r-- | drivers/scsi/aic94xx/aic94xx_init.c | 9 | ||||
-rw-r--r-- | drivers/scsi/aic94xx/aic94xx_scb.c | 120 | ||||
-rw-r--r-- | drivers/scsi/fd_mcs.c | 2 | ||||
-rw-r--r-- | drivers/scsi/hosts.c | 4 | ||||
-rw-r--r-- | drivers/scsi/ips.c | 28 | ||||
-rw-r--r-- | drivers/scsi/ips.h | 9 | ||||
-rw-r--r-- | drivers/scsi/libsas/sas_init.c | 4 | ||||
-rw-r--r-- | drivers/scsi/libsas/sas_scsi_host.c | 90 | ||||
-rw-r--r-- | drivers/scsi/ncr53c8xx.c | 19 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_os.c | 12 | ||||
-rw-r--r-- | drivers/scsi/qla2xxx/qla_sup.c | 8 | ||||
-rw-r--r-- | drivers/scsi/scsi.c | 2 | ||||
-rw-r--r-- | drivers/scsi/scsi_error.c | 33 | ||||
-rw-r--r-- | drivers/scsi/scsi_lib.c | 313 | ||||
-rw-r--r-- | drivers/scsi/scsi_priv.h | 3 | ||||
-rw-r--r-- | drivers/scsi/scsi_scan.c | 203 | ||||
-rw-r--r-- | drivers/scsi/scsi_wait_scan.c | 31 | ||||
-rw-r--r-- | drivers/scsi/sd.c | 29 | ||||
-rw-r--r-- | drivers/scsi/st.c | 16 | ||||
-rw-r--r-- | drivers/scsi/t128.h | 39 |
24 files changed, 732 insertions, 271 deletions
diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c index cdd03372478..3075204915c 100644 --- a/drivers/scsi/BusLogic.c +++ b/drivers/scsi/BusLogic.c @@ -2186,21 +2186,21 @@ static int __init BusLogic_init(void) if (BusLogic_ProbeOptions.NoProbe) return -ENODEV; - BusLogic_ProbeInfoList = (struct BusLogic_ProbeInfo *) - kmalloc(BusLogic_MaxHostAdapters * sizeof(struct BusLogic_ProbeInfo), GFP_ATOMIC); + BusLogic_ProbeInfoList = + kzalloc(BusLogic_MaxHostAdapters * sizeof(struct BusLogic_ProbeInfo), GFP_KERNEL); if (BusLogic_ProbeInfoList == NULL) { BusLogic_Error("BusLogic: Unable to allocate Probe Info List\n", NULL); return -ENOMEM; } - memset(BusLogic_ProbeInfoList, 0, BusLogic_MaxHostAdapters * sizeof(struct BusLogic_ProbeInfo)); - PrototypeHostAdapter = (struct BusLogic_HostAdapter *) - kmalloc(sizeof(struct BusLogic_HostAdapter), GFP_ATOMIC); + + PrototypeHostAdapter = + kzalloc(sizeof(struct BusLogic_HostAdapter), GFP_KERNEL); if (PrototypeHostAdapter == NULL) { kfree(BusLogic_ProbeInfoList); BusLogic_Error("BusLogic: Unable to allocate Prototype " "Host Adapter\n", NULL); return -ENOMEM; } - memset(PrototypeHostAdapter, 0, sizeof(struct BusLogic_HostAdapter)); + #ifdef MODULE if (BusLogic != NULL) BusLogic_Setup(BusLogic); diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index bcca39c3bcb..a0a77fde370 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -141,6 +141,8 @@ obj-$(CONFIG_CHR_DEV_SCH) += ch.o # This goes last, so that "real" scsi devices probe earlier obj-$(CONFIG_SCSI_DEBUG) += scsi_debug.o +obj-$(CONFIG_SCSI) += scsi_wait_scan.o + scsi_mod-y += scsi.o hosts.o scsi_ioctl.o constants.o \ scsicam.o scsi_error.o scsi_lib.o \ scsi_scan.o scsi_sysfs.o \ diff --git a/drivers/scsi/NCR53c406a.c b/drivers/scsi/NCR53c406a.c index d4613815f68..8578555d58f 100644 --- a/drivers/scsi/NCR53c406a.c +++ b/drivers/scsi/NCR53c406a.c @@ -220,9 +220,11 @@ static void *addresses[] = { static unsigned short ports[] = { 0x230, 0x330, 0x280, 0x290, 0x330, 0x340, 0x300, 0x310, 0x348, 0x350 }; #define PORT_COUNT ARRAY_SIZE(ports) +#ifndef MODULE /* possible interrupt channels */ static unsigned short intrs[] = { 10, 11, 12, 15 }; #define INTR_COUNT ARRAY_SIZE(intrs) +#endif /* !MODULE */ /* signatures for NCR 53c406a based controllers */ #if USE_BIOS @@ -605,6 +607,7 @@ static int NCR53c406a_release(struct Scsi_Host *shost) return 0; } +#ifndef MODULE /* called from init/main.c */ static int __init NCR53c406a_setup(char *str) { @@ -661,6 +664,8 @@ static int __init NCR53c406a_setup(char *str) __setup("ncr53c406a=", NCR53c406a_setup); +#endif /* !MODULE */ + static const char *NCR53c406a_info(struct Scsi_Host *SChost) { DEB(printk("NCR53c406a_info called\n")); diff --git a/drivers/scsi/aha1740.c b/drivers/scsi/aha1740.c index c3c38a7e8d3..d7af9c63a04 100644 --- a/drivers/scsi/aha1740.c +++ b/drivers/scsi/aha1740.c @@ -586,7 +586,7 @@ static struct scsi_host_template aha1740_template = { static int aha1740_probe (struct device *dev) { - int slotbase; + int slotbase, rc; unsigned int irq_level, irq_type, translation; struct Scsi_Host *shpnt; struct aha1740_hostdata *host; @@ -641,10 +641,16 @@ static int aha1740_probe (struct device *dev) } eisa_set_drvdata (edev, shpnt); - scsi_add_host (shpnt, dev); /* XXX handle failure */ + + rc = scsi_add_host (shpnt, dev); + if (rc) + goto err_irq; + scsi_scan_host (shpnt); return 0; + err_irq: + free_irq(irq_level, shpnt); err_unmap: dma_unmap_single (&edev->dev, host->ecb_dma_addr, sizeof (host->ecb), DMA_BIDIRECTIONAL); diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c index 57c5ba4043f..42302ef05ee 100644 --- a/drivers/scsi/aic94xx/aic94xx_init.c +++ b/drivers/scsi/aic94xx/aic94xx_init.c @@ -724,6 +724,15 @@ static void asd_free_queues(struct asd_ha_struct *asd_ha) list_for_each_safe(pos, n, &pending) { struct asd_ascb *ascb = list_entry(pos, struct asd_ascb, list); + /* + * Delete unexpired ascb timers. This may happen if we issue + * a CONTROL PHY scb to an adapter and rmmod before the scb + * times out. Apparently we don't wait for the CONTROL PHY + * to complete, so it doesn't matter if we kill the timer. + */ + del_timer_sync(&ascb->timer); + WARN_ON(ascb->scb->header.opcode != CONTROL_PHY); + list_del_init(pos); ASD_DPRINTK("freeing from pending\n"); asd_ascb_free(ascb); diff --git a/drivers/scsi/aic94xx/aic94xx_scb.c b/drivers/scsi/aic94xx/aic94xx_scb.c index b15caf1c8fa..14d5d8c2ee1 100644 --- a/drivers/scsi/aic94xx/aic94xx_scb.c +++ b/drivers/scsi/aic94xx/aic94xx_scb.c @@ -25,6 +25,7 @@ */ #include <linux/pci.h> +#include <scsi/scsi_host.h> #include "aic94xx.h" #include "aic94xx_reg.h" @@ -412,6 +413,39 @@ void asd_invalidate_edb(struct asd_ascb *ascb, int edb_id) } } +/* hard reset a phy later */ +static void do_phy_reset_later(void *data) +{ + struct sas_phy *sas_phy = data; + int error; + + ASD_DPRINTK("%s: About to hard reset phy %d\n", __FUNCTION__, + sas_phy->identify.phy_identifier); + /* Reset device port */ + error = sas_phy_reset(sas_phy, 1); + if (error) + ASD_DPRINTK("%s: Hard reset of phy %d failed (%d).\n", + __FUNCTION__, sas_phy->identify.phy_identifier, error); +} + +static void phy_reset_later(struct sas_phy *sas_phy, struct Scsi_Host *shost) +{ + INIT_WORK(&sas_phy->reset_work, do_phy_reset_later, sas_phy); + queue_work(shost->work_q, &sas_phy->reset_work); +} + +/* start up the ABORT TASK tmf... */ +static void task_kill_later(struct asd_ascb *ascb) +{ + struct asd_ha_struct *asd_ha = ascb->ha; + struct sas_ha_struct *sas_ha = &asd_ha->sas_ha; + struct Scsi_Host *shost = sas_ha->core.shost; + struct sas_task *task = ascb->uldd_task; + + INIT_WORK(&task->abort_work, (void (*)(void *))sas_task_abort, task); + queue_work(shost->work_q, &task->abort_work); +} + static void escb_tasklet_complete(struct asd_ascb *ascb, struct done_list_struct *dl) { @@ -439,6 +473,74 @@ static void escb_tasklet_complete(struct asd_ascb *ascb, ascb->scb->header.opcode); } + /* Catch these before we mask off the sb_opcode bits */ + switch (sb_opcode) { + case REQ_TASK_ABORT: { + struct asd_ascb *a, *b; + u16 tc_abort; + + tc_abort = *((u16*)(&dl->status_block[1])); + tc_abort = le16_to_cpu(tc_abort); + + ASD_DPRINTK("%s: REQ_TASK_ABORT, reason=0x%X\n", + __FUNCTION__, dl->status_block[3]); + + /* Find the pending task and abort it. */ + list_for_each_entry_safe(a, b, &asd_ha->seq.pend_q, list) + if (a->tc_index == tc_abort) { + task_kill_later(a); + break; + } + goto out; + } + case REQ_DEVICE_RESET: { + struct Scsi_Host *shost = sas_ha->core.shost; + struct sas_phy *dev_phy; + struct asd_ascb *a; + u16 conn_handle; + + conn_handle = *((u16*)(&dl->status_block[1])); + conn_handle = le16_to_cpu(conn_handle); + + ASD_DPRINTK("%s: REQ_DEVICE_RESET, reason=0x%X\n", __FUNCTION__, + dl->status_block[3]); + + /* Kill all pending tasks and reset the device */ + dev_phy = NULL; + list_for_each_entry(a, &asd_ha->seq.pend_q, list) { + struct sas_task *task; + struct domain_device *dev; + u16 x; + + task = a->uldd_task; + if (!task) + continue; + dev = task->dev; + + x = (unsigned long)dev->lldd_dev; + if (x == conn_handle) { + dev_phy = dev->port->phy; + task_kill_later(a); + } + } + + /* Reset device port */ + if (!dev_phy) { + ASD_DPRINTK("%s: No pending commands; can't reset.\n", + __FUNCTION__); + goto out; + } + phy_reset_later(dev_phy, shost); + goto out; + } + case SIGNAL_NCQ_ERROR: + ASD_DPRINTK("%s: SIGNAL_NCQ_ERROR\n", __FUNCTION__); + goto out; + case CLEAR_NCQ_ERROR: + ASD_DPRINTK("%s: CLEAR_NCQ_ERROR\n", __FUNCTION__); + goto out; + } + sb_opcode &= ~DL_PHY_MASK; switch (sb_opcode) { @@ -469,22 +571,6 @@ static void escb_tasklet_complete(struct asd_ascb *ascb, asd_deform_port(asd_ha, phy); sas_ha->notify_port_event(sas_phy, PORTE_TIMER_EVENT); break; - case REQ_TASK_ABORT: - ASD_DPRINTK("%s: phy%d: REQ_TASK_ABORT\n", __FUNCTION__, - phy_id); - break; - case REQ_DEVICE_RESET: - ASD_DPRINTK("%s: phy%d: REQ_DEVICE_RESET\n", __FUNCTION__, - phy_id); - break; - case SIGNAL_NCQ_ERROR: - ASD_DPRINTK("%s: phy%d: SIGNAL_NCQ_ERROR\n", __FUNCTION__, - phy_id); - break; - case CLEAR_NCQ_ERROR: - ASD_DPRINTK("%s: phy%d: CLEAR_NCQ_ERROR\n", __FUNCTION__, - phy_id); - break; default: ASD_DPRINTK("%s: phy%d: unknown event:0x%x\n", __FUNCTION__, phy_id, sb_opcode); @@ -504,7 +590,7 @@ static void escb_tasklet_complete(struct asd_ascb *ascb, break; } - +out: asd_invalidate_edb(ascb, edb); } diff --git a/drivers/scsi/fd_mcs.c b/drivers/scsi/fd_mcs.c index ef8285c326e..668569e8856 100644 --- a/drivers/scsi/fd_mcs.c +++ b/drivers/scsi/fd_mcs.c @@ -294,6 +294,7 @@ static struct Scsi_Host *hosts[FD_MAX_HOSTS + 1] = { NULL }; static int user_fifo_count = 0; static int user_fifo_size = 0; +#ifndef MODULE static int __init fd_mcs_setup(char *str) { static int done_setup = 0; @@ -311,6 +312,7 @@ static int __init fd_mcs_setup(char *str) } __setup("fd_mcs=", fd_mcs_setup); +#endif /* !MODULE */ static void print_banner(struct Scsi_Host *shpnt) { diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index 68ef1636678..2ffdc9e0532 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -301,8 +301,8 @@ struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize) if (!shost) return NULL; - spin_lock_init(&shost->default_lock); - scsi_assign_lock(shost, &shost->default_lock); + shost->host_lock = &shost->default_lock; + spin_lock_init(shost->host_lock); shost->shost_state = SHOST_CREATED; INIT_LIST_HEAD(&shost->__devices); INIT_LIST_HEAD(&shost->__targets); diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c index f06a06ae609..8b704f73055 100644 --- a/drivers/scsi/ips.c +++ b/drivers/scsi/ips.c @@ -5001,7 +5001,7 @@ ips_init_copperhead(ips_ha_t * ha) break; /* Delay for 1 Second */ - msleep(IPS_ONE_SEC); + MDELAY(IPS_ONE_SEC); } if (j >= 45) @@ -5027,7 +5027,7 @@ ips_init_copperhead(ips_ha_t * ha) break; /* Delay for 1 Second */ - msleep(IPS_ONE_SEC); + MDELAY(IPS_ONE_SEC); } if (j >= 240) @@ -5045,7 +5045,7 @@ ips_init_copperhead(ips_ha_t * ha) break; /* Delay for 1 Second */ - msleep(IPS_ONE_SEC); + MDELAY(IPS_ONE_SEC); } if (i >= 240) @@ -5095,7 +5095,7 @@ ips_init_copperhead_memio(ips_ha_t * ha) break; /* Delay for 1 Second */ - msleep(IPS_ONE_SEC); + MDELAY(IPS_ONE_SEC); } if (j >= 45) @@ -5121,7 +5121,7 @@ ips_init_copperhead_memio(ips_ha_t * ha) break; /* Delay for 1 Second */ - msleep(IPS_ONE_SEC); + MDELAY(IPS_ONE_SEC); } if (j >= 240) @@ -5139,7 +5139,7 @@ ips_init_copperhead_memio(ips_ha_t * ha) break; /* Delay for 1 Second */ - msleep(IPS_ONE_SEC); + MDELAY(IPS_ONE_SEC); } if (i >= 240) @@ -5191,7 +5191,7 @@ ips_init_morpheus(ips_ha_t * ha) break; /* Delay for 1 Second */ - msleep(IPS_ONE_SEC); + MDELAY(IPS_ONE_SEC); } if (i >= 45) { @@ -5217,7 +5217,7 @@ ips_init_morpheus(ips_ha_t * ha) if (Post != 0x4F00) break; /* Delay for 1 Second */ - msleep(IPS_ONE_SEC); + MDELAY(IPS_ONE_SEC); } if (i >= 120) { @@ -5247,7 +5247,7 @@ ips_init_morpheus(ips_ha_t * ha) break; /* Delay for 1 Second */ - msleep(IPS_ONE_SEC); + MDELAY(IPS_ONE_SEC); } if (i >= 240) { @@ -5307,12 +5307,12 @@ ips_reset_copperhead(ips_ha_t * ha) outb(IPS_BIT_RST, ha->io_addr + IPS_REG_SCPR); /* Delay for 1 Second */ - msleep(IPS_ONE_SEC); + MDELAY(IPS_ONE_SEC); outb(0, ha->io_addr + IPS_REG_SCPR); /* Delay for 1 Second */ - msleep(IPS_ONE_SEC); + MDELAY(IPS_ONE_SEC); if ((*ha->func.init) (ha)) break; @@ -5352,12 +5352,12 @@ ips_reset_copperhead_memio(ips_ha_t * ha) writeb(IPS_BIT_RST, ha->mem_ptr + IPS_REG_SCPR); /* Delay for 1 Second */ - msleep(IPS_ONE_SEC); + MDELAY(IPS_ONE_SEC); writeb(0, ha->mem_ptr + IPS_REG_SCPR); /* Delay for 1 Second */ - msleep(IPS_ONE_SEC); + MDELAY(IPS_ONE_SEC); if ((*ha->func.init) (ha)) break; @@ -5398,7 +5398,7 @@ ips_reset_morpheus(ips_ha_t * ha) writel(0x80000000, ha->mem_ptr + IPS_REG_I960_IDR); /* Delay for 5 Seconds */ - msleep(5 * IPS_ONE_SEC); + MDELAY(5 * IPS_ONE_SEC); /* Do a PCI config read to wait for adapter */ pci_read_config_byte(ha->pcidev, 4, &junk); diff --git a/drivers/scsi/ips.h b/drivers/scsi/ips.h index 34680f3dd45..b726dcc424b 100644 --- a/drivers/scsi/ips.h +++ b/drivers/scsi/ips.h @@ -51,6 +51,7 @@ #define _IPS_H_ #include <linux/version.h> +#include <linux/nmi.h> #include <asm/uaccess.h> #include <asm/io.h> @@ -116,9 +117,11 @@ dev_printk(level , &((pcidev)->dev) , format , ## arg) #endif - #ifndef MDELAY - #define MDELAY mdelay - #endif + #define MDELAY(n) \ + do { \ + mdelay(n); \ + touch_nmi_watchdog(); \ + } while (0) #ifndef min #define min(x,y) ((x) < (y) ? x : y) diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c index c836a237fb7..0fb347b4b1a 100644 --- a/drivers/scsi/libsas/sas_init.c +++ b/drivers/scsi/libsas/sas_init.c @@ -112,6 +112,8 @@ int sas_register_ha(struct sas_ha_struct *sas_ha) } } + INIT_LIST_HEAD(&sas_ha->eh_done_q); + return 0; Undo_ports: @@ -142,7 +144,7 @@ static int sas_get_linkerrors(struct sas_phy *phy) return sas_smp_get_phy_events(phy); } -static int sas_phy_reset(struct sas_phy *phy, int hard_reset) +int sas_phy_reset(struct sas_phy *phy, int hard_reset) { int ret; enum phy_func reset_type; diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index e46e79355b7..e064aac06b9 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -29,9 +29,11 @@ #include <scsi/scsi_device.h> #include <scsi/scsi_tcq.h> #include <scsi/scsi.h> +#include <scsi/scsi_eh.h> #include <scsi/scsi_transport.h> #include <scsi/scsi_transport_sas.h> #include "../scsi_sas_internal.h" +#include "../scsi_transport_api.h" #include <linux/err.h> #include <linux/blkdev.h> @@ -46,6 +48,7 @@ static void sas_scsi_task_done(struct sas_task *task) { struct task_status_struct *ts = &task->task_status; struct scsi_cmnd *sc = task->uldd_task; + struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(sc->device->host); unsigned ts_flags = task->task_state_flags; int hs = 0, stat = 0; @@ -116,7 +119,7 @@ static void sas_scsi_task_done(struct sas_task *task) sas_free_task(task); /* This is very ugly but this is how SCSI Core works. */ if (ts_flags & SAS_TASK_STATE_ABORTED) - scsi_finish_command(sc); + scsi_eh_finish_cmd(sc, &sas_ha->eh_done_q); else sc->scsi_done(sc); } @@ -307,6 +310,15 @@ static enum task_disposition sas_scsi_find_task(struct sas_task *task) spin_unlock_irqrestore(&core->task_queue_lock, flags); } + spin_lock_irqsave(&task->task_state_lock, flags); + if (task->task_state_flags & SAS_TASK_INITIATOR_ABORTED) { + spin_unlock_irqrestore(&task->task_state_lock, flags); + SAS_DPRINTK("%s: task 0x%p already aborted\n", + __FUNCTION__, task); + return TASK_IS_ABORTED; + } + spin_unlock_irqrestore(&task->task_state_lock, flags); + for (i = 0; i < 5; i++) { SAS_DPRINTK("%s: aborting task 0x%p\n", __FUNCTION__, task); res = si->dft->lldd_abort_task(task); @@ -409,13 +421,16 @@ Again: SAS_DPRINTK("going over list...\n"); list_for_each_entry_safe(cmd, n, &error_q, eh_entry) { struct sas_task *task = TO_SAS_TASK(cmd); + list_del_init(&cmd->eh_entry); + if (!task) { + SAS_DPRINTK("%s: taskless cmd?!\n", __FUNCTION__); + continue; + } SAS_DPRINTK("trying to find task 0x%p\n", task); - list_del_init(&cmd->eh_entry); res = sas_scsi_find_task(task); cmd->eh_eflags = 0; - shost->host_failed--; switch (res) { case TASK_IS_DONE: @@ -491,6 +506,7 @@ Again: } } out: + scsi_eh_flush_done_q(&ha->eh_done_q); SAS_DPRINTK("--- Exit %s\n", __FUNCTION__); return; clear_q: @@ -508,12 +524,18 @@ enum scsi_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *cmd) unsigned long flags; if (!task) { - SAS_DPRINTK("command 0x%p, task 0x%p, timed out: EH_HANDLED\n", + SAS_DPRINTK("command 0x%p, task 0x%p, gone: EH_HANDLED\n", cmd, task); return EH_HANDLED; } spin_lock_irqsave(&task->task_state_lock, flags); + if (task->task_state_flags & SAS_TASK_INITIATOR_ABORTED) { + spin_unlock_irqrestore(&task->task_state_lock, flags); + SAS_DPRINTK("command 0x%p, task 0x%p, aborted by initiator: " + "EH_NOT_HANDLED\n", cmd, task); + return EH_NOT_HANDLED; + } if (task->task_state_flags & SAS_TASK_STATE_DONE) { spin_unlock_irqrestore(&task->task_state_lock, flags); SAS_DPRINTK("command 0x%p, task 0x%p, timed out: EH_HANDLED\n", @@ -777,6 +799,64 @@ void sas_shutdown_queue(struct sas_ha_struct *sas_ha) spin_unlock_irqrestore(&core->task_queue_lock, flags); } +static int do_sas_task_abort(struct sas_task *task) +{ + struct scsi_cmnd *sc = task->uldd_task; + struct sas_internal *si = + to_sas_internal(task->dev->port->ha->core.shost->transportt); + unsigned long flags; + int res; + + spin_lock_irqsave(&task->task_state_lock, flags); + if (task->task_state_flags & SAS_TASK_STATE_ABORTED) { + spin_unlock_irqrestore(&task->task_state_lock, flags); + SAS_DPRINTK("%s: Task %p already aborted.\n", __FUNCTION__, + task); + return 0; + } + + task->task_state_flags |= SAS_TASK_INITIATOR_ABORTED; + if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) + task->task_state_flags |= SAS_TASK_STATE_ABORTED; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + if (!si->dft->lldd_abort_task) + return -ENODEV; + + res = si->dft->lldd_abort_task(task); + if ((task->task_state_flags & SAS_TASK_STATE_DONE) || + (res == TMF_RESP_FUNC_COMPLETE)) + { + /* SMP commands don't have scsi_cmds(?) */ + if (!sc) { + task->task_done(task); + return 0; + } + scsi_req_abort_cmd(sc); + scsi_schedule_eh(sc->device->host); + return 0; + } + + spin_lock_irqsave(&task->task_state_lock, flags); + task->task_state_flags &= ~SAS_TASK_INITIATOR_ABORTED; + if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) + task->task_state_flags &= ~SAS_TASK_STATE_ABORTED; + spin_unlock_irqrestore(&task->task_state_lock, flags); + + return -EAGAIN; +} + +void sas_task_abort(struct sas_task *task) +{ + int i; + + for (i = 0; i < 5; i++) + if (!do_sas_task_abort(task)) + return; + + SAS_DPRINTK("%s: Could not kill task!\n", __FUNCTION__); +} + EXPORT_SYMBOL_GPL(sas_queuecommand); EXPORT_SYMBOL_GPL(sas_target_alloc); EXPORT_SYMBOL_GPL(sas_slave_configure); @@ -784,3 +864,5 @@ EXPORT_SYMBOL_GPL(sas_slave_destroy); EXPORT_SYMBOL_GPL(sas_change_queue_depth); EXPORT_SYMBOL_GPL(sas_change_queue_type); EXPORT_SYMBOL_GPL(sas_bios_param); +EXPORT_SYMBOL_GPL(sas_task_abort); +EXPORT_SYMBOL_GPL(sas_phy_reset); diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c index 6cc2bc2f62b..5a88fa0b2fc 100644 --- a/drivers/scsi/ncr53c8xx.c +++ b/drivers/scsi/ncr53c8xx.c @@ -589,10 +589,12 @@ static int __map_scsi_sg_data(struct device *dev, struct scsi_cmnd *cmd) static struct ncr_driver_setup driver_setup = SCSI_NCR_DRIVER_SETUP; +#ifndef MODULE #ifdef SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT static struct ncr_driver_setup driver_safe_setup __initdata = SCSI_NCR_DRIVER_SAFE_SETUP; #endif +#endif /* !MODULE */ #define initverbose (driver_setup.verbose) #define bootverbose (np->verbose) @@ -641,6 +643,13 @@ static struct ncr_driver_setup #define OPT_IARB 26 #endif +#ifdef MODULE +#define ARG_SEP ' ' +#else +#define ARG_SEP ',' +#endif + +#ifndef MODULE static char setup_token[] __initdata = "tags:" "mpar:" "spar:" "disc:" @@ -660,12 +669,6 @@ static char setup_token[] __initdata = #endif ; /* DONNOT REMOVE THIS ';' */ -#ifdef MODULE -#define ARG_SEP ' ' -#else -#define ARG_SEP ',' -#endif - static int __init get_setup_token(char *p) { char *cur = setup_token; @@ -682,7 +685,6 @@ static int __init get_setup_token(char *p) return 0; } - static int __init sym53c8xx__setup(char *str) { #ifdef SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT @@ -804,6 +806,7 @@ static int __init sym53c8xx__setup(char *str) #endif /* SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT */ return 1; } +#endif /* !MODULE */ /*=================================================================== ** @@ -8321,12 +8324,12 @@ char *ncr53c8xx; /* command line passed by insmod */ module_param(ncr53c8xx, charp, 0); #endif +#ifndef MODULE static int __init ncr53c8xx_setup(char *str) { return sym53c8xx__setup(str); } -#ifndef MODULE __setup("ncr53c8xx=", ncr53c8xx_setup); #endif diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 208607be78c..3eb4cd2cbc7 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -287,7 +287,7 @@ qla24xx_pci_info_str(struct scsi_qla_host *ha, char *str) return str; } -char * +static char * qla2x00_fw_version_str(struct scsi_qla_host *ha, char *str) { char un_str[10]; @@ -325,7 +325,7 @@ qla2x00_fw_version_str(struct scsi_qla_host *ha, char *str) return (str); } -char * +static char * qla24xx_fw_version_str(struct scsi_qla_host *ha, char *str) { sprintf(str, "%d.%02d.%02d ", ha->fw_major_version, @@ -634,7 +634,7 @@ qla2x00_block_error_handler(struct scsi_cmnd *cmnd) * Note: * Only return FAILED if command not returned by firmware. **************************************************************************/ -int +static int qla2xxx_eh_abort(struct scsi_cmnd *cmd) { scsi_qla_host_t *ha = to_qla_host(cmd->device->host); @@ -771,7 +771,7 @@ qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t) * SUCCESS/FAILURE (defined as macro in scsi.h). * **************************************************************************/ -int +static int qla2xxx_eh_device_reset(struct scsi_cmnd *cmd) { scsi_qla_host_t *ha = to_qla_host(cmd->device->host); @@ -902,7 +902,7 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha) * SUCCESS/FAILURE (defined as macro in scsi.h). * **************************************************************************/ -int +static int qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd) { scsi_qla_host_t *ha = to_qla_host(cmd->device->host); @@ -963,7 +963,7 @@ eh_bus_reset_done: * * Note: **************************************************************************/ -int +static int qla2xxx_eh_host_reset(struct scsi_cmnd *cmd) { scsi_qla_host_t *ha = to_qla_host(cmd->device->host); diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index c71dbd5bd54..15390ad8745 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -449,7 +449,7 @@ nvram_data_to_access_addr(uint32_t naddr) return FARX_ACCESS_NVRAM_DATA | naddr; } -uint32_t +static uint32_t qla24xx_read_flash_dword(scsi_qla_host_t *ha, uint32_t addr) { int rval; @@ -490,7 +490,7 @@ qla24xx_read_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr, return dwptr; } -int +static int qla24xx_write_flash_dword(scsi_qla_host_t *ha, uint32_t addr, uint32_t data) { int rval; @@ -512,7 +512,7 @@ qla24xx_write_flash_dword(scsi_qla_host_t *ha, uint32_t addr, uint32_t data) return rval; } -void +static void qla24xx_get_flash_manufacturer(scsi_qla_host_t *ha, uint8_t *man_id, uint8_t *flash_id) { @@ -537,7 +537,7 @@ qla24xx_get_flash_manufacturer(scsi_qla_host_t *ha, uint8_t *man_id, } } -int +static int qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr, uint32_t dwords) { diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index c59f31533ab..780d6dc92b4 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -871,9 +871,9 @@ EXPORT_SYMBOL(scsi_device_get); */ void scsi_device_put(struct scsi_device *sdev) { +#ifdef CONFIG_MODULE_UNLOAD struct module *module = sdev->host->hostt->module; -#ifdef CONFIG_MODULE_UNLOAD /* The module refcount will be zero if scsi_device_get() * was called from a module removal routine */ if (module && module_refcount(module) != 0) diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index aff1b0cfd4b..2ecb6ff4244 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -453,9 +453,18 @@ static void scsi_eh_done(struct scsi_cmnd *scmd) } /** - * scsi_send_eh_cmnd - send a cmd to a device as part of error recovery. - * @scmd: SCSI Cmd to send. - * @timeout: Timeout for cmd. + * scsi_send_eh_cmnd - submit a scsi command as part of error recory + * @scmd: SCSI command structure to hijack + * @cmnd: CDB to send + * @cmnd_size: size in bytes of @cmnd + * @timeout: timeout for this request + * @copy_sense: request sense data if set to 1 + * + * This function is used to send a scsi command down to a target device + * as part of the error recovery process. If @copy_sense is 0 the command + * sent must be one that does not transfer any data. If @copy_sense is 1 + * the command must be REQUEST_SENSE and this functions copies out the + * sense buffer it got into @scmd->sense_buffer. * * Return value: * SUCCESS or FAILED or NEEDS_RETRY @@ -469,6 +478,7 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd, DECLARE_COMPLETION_ONSTACK(done); unsigned long timeleft; unsigned long flags; + struct scatterlist sgl; unsigned char old_cmnd[MAX_COMMAND_SIZE]; enum dma_data_direction old_data_direction; unsigned short old_use_sg; @@ -500,19 +510,24 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd, if (shost->hostt->unchecked_isa_dma) gfp_mask |= __GFP_DMA; - scmd->sc_data_direction = DMA_FROM_DEVICE; - scmd->request_bufflen = 252; - scmd->request_buffer = kzalloc(scmd->request_bufflen, gfp_mask); - if (!scmd->request_buffer) + sgl.page = alloc_page(gfp_mask); + if (!sgl.page) return FAILED; + sgl.offset = 0; + sgl.length = 252; + + scmd->sc_data_direction = DMA_FROM_DEVICE; + scmd->request_bufflen = sgl.length; + scmd->request_buffer = &sgl; + scmd->use_sg = 1; } else { scmd->request_buffer = NULL; scmd->request_bufflen = 0; scmd->sc_data_direction = DMA_NONE; + scmd->use_sg = 0; } scmd->underflow = 0; - scmd->use_sg = 0; scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]); if (sdev->scsi_level <= SCSI_2) @@ -583,7 +598,7 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd, memcpy(scmd->sense_buffer, scmd->request_buffer, sizeof(scmd->sense_buffer)); } - kfree(scmd->request_buffer); + __free_page(sgl.page); } diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 3ac4890ce08..2f12f9f12fc 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -996,25 +996,14 @@ static int scsi_init_io(struct scsi_cmnd *cmd) int count; /* - * if this is a rq->data based REQ_BLOCK_PC, setup for a non-sg xfer - */ - if (blk_pc_request(req) && !req->bio) { - cmd->request_bufflen = req->data_len; - cmd->request_buffer = req->data; - req->buffer = req->data; - cmd->use_sg = 0; - return 0; - } - - /* - * we used to not use scatter-gather for single segment request, + * We used to not use scatter-gather for single segment request, * but now we do (it makes highmem I/O easier to support without * kmapping pages) */ cmd->use_sg = req->nr_phys_segments; /* - * if sg table allocation fails, requeue request later. + * If sg table allocation fails, requeue request later. */ sgpnt = scsi_alloc_sgtable(cmd, GFP_ATOMIC); if (unlikely(!sgpnt)) { @@ -1022,24 +1011,21 @@ static int scsi_init_io(struct scsi_cmnd *cmd) return BLKPREP_DEFER; } + req->buffer = NULL; cmd->request_buffer = (char *) sgpnt; - cmd->request_bufflen = req->nr_sectors << 9; if (blk_pc_request(req)) cmd->request_bufflen = req->data_len; - req->buffer = NULL; + else + cmd->request_bufflen = req->nr_sectors << 9; /* * Next, walk the list, and fill in the addresses and sizes of * each segment. */ count = blk_rq_map_sg(req->q, req, cmd->request_buffer); - - /* - * mapped well, send it off - */ if (likely(count <= cmd->use_sg)) { cmd->use_sg = count; - return 0; + return BLKPREP_OK; } printk(KERN_ERR "Incorrect number of segments after building list\n"); @@ -1069,6 +1055,27 @@ static int scsi_issue_flush_fn(request_queue_t *q, struct gendisk *disk, return -EOPNOTSUPP; } +static struct scsi_cmnd *scsi_get_cmd_from_req(struct scsi_device *sdev, + struct request *req) +{ + struct scsi_cmnd *cmd; + + if (!req->special) { + cmd = scsi_get_command(sdev, GFP_ATOMIC); + if (unlikely(!cmd)) + return NULL; + req->special = cmd; + } else { + cmd = req->special; + } + + /* pull a tag out of the request if we have one */ + cmd->tag = req->tag; + cmd->request = req; + + return cmd; +} + static void scsi_blk_pc_done(struct scsi_cmnd *cmd) { BUG_ON(!blk_pc_request(cmd->request)); @@ -1081,9 +1088,37 @@ static void scsi_blk_pc_done(struct scsi_cmnd *cmd) scsi_io_completion(cmd, cmd->request_bufflen); } -static void scsi_setup_blk_pc_cmnd(struct scsi_cmnd *cmd) +static int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req) { - struct request *req = cmd->request; + struct scsi_cmnd *cmd; + + cmd = scsi_get_cmd_from_req(sdev, req); + if (unlikely(!cmd)) + return BLKPREP_DEFER; + + /* + * BLOCK_PC requests may transfer data, in which case they must + * a bio attached to them. Or they might contain a SCSI command + * that does not transfer data, in which case they may optionally + * submit a request without an attached bio. + */ + if (req->bio) { + int ret; + + BUG_ON(!req->nr_phys_segments); + + ret = scsi_init_io(cmd); + if (unlikely(ret)) + return ret; + } else { + BUG_ON(req->data_len); + BUG_ON(req->data); + + cmd->request_bufflen = 0; + cmd->request_buffer = NULL; + cmd->use_sg = 0; + req->buffer = NULL; + } BUILD_BUG_ON(sizeof(req->cmd) > sizeof(cmd->cmnd)); memcpy(cmd->cmnd, req->cmd, sizeof(cmd->cmnd)); @@ -1099,154 +1134,138 @@ static void scsi_setup_blk_pc_cmnd(struct scsi_cmnd *cmd) cmd->allowed = req->retries; cmd->timeout_per_command = req->timeout; cmd->done = scsi_blk_pc_done; + return BLKPREP_OK; } -static int scsi_prep_fn(struct request_queue *q, struct request *req) +/* + * Setup a REQ_TYPE_FS command. These are simple read/write request + * from filesystems that still need to be translated to SCSI CDBs from + * the ULD. + */ +static int scsi_setup_fs_cmnd(struct scsi_device *sdev, struct request *req) { - struct scsi_device *sdev = q->queuedata; struct scsi_cmnd *cmd; - int specials_only = 0; + struct scsi_driver *drv; + int ret; /* - * Just check to see if the device is online. If it isn't, we - * refuse to process any commands. The device must be brought - * online before trying any recovery commands + * Filesystem requests must transfer data. */ - if (unlikely(!scsi_device_online(sdev))) { - sdev_printk(KERN_ERR, sdev, - "rejecting I/O to offline device\n"); - goto kill; - } - if (unlikely(sdev->sdev_state != SDEV_RUNNING)) { - /* OK, we're not in a running state don't prep - * user commands */ - if (sdev->sdev_state == SDEV_DEL) { - /* Device is fully deleted, no commands - * at all allowed down */ - sdev_printk(KERN_ERR, sdev, - "rejecting I/O to dead device\n"); - goto kill; - } - /* OK, we only allow special commands (i.e. not - * user initiated ones */ - specials_only = sdev->sdev_state; + BUG_ON(!req->nr_phys_segments); + + cmd = scsi_get_cmd_from_req(sdev, req); + if (unlikely(!cmd)) + return BLKPREP_DEFER; + + ret = scsi_init_io(cmd); + if (unlikely(ret)) + return ret; + + /* + * Initialize the actual SCSI command for this request. + */ + drv = *(struct scsi_driver **)req->rq_disk->private_data; + if (unlikely(!drv->init_command(cmd))) { + scsi_release_buffers(cmd); + scsi_put_command(cmd); + return BLKPREP_KILL; } + return BLKPREP_OK; +} + +static int scsi_prep_fn(struct request_queue *q, struct request *req) +{ + struct scsi_device *sdev = q->queuedata; + int ret = BLKPREP_OK; + /* - * Find the actual device driver associated with this command. - * The SPECIAL requests are things like character device or - * ioctls, which did not originate from ll_rw_blk. Note that - * the special field is also used to indicate the cmd for - * the remainder of a partially fulfilled request that can - * come up when there is a medium error. We have to treat - * these two cases differently. We differentiate by looking - * at request->cmd, as this tells us the real story. + * If the device is not in running state we will reject some + * or all commands. */ - if (blk_special_request(req) && req->special) - cmd = req->special; - else if (blk_pc_request(req) || blk_fs_request(req)) { - if (unlikely(specials_only) && !(req->cmd_flags & REQ_PREEMPT)){ - if (specials_only == SDEV_QUIESCE || - specials_only == SDEV_BLOCK) - goto defer; - + if (unlikely(sdev->sdev_state != SDEV_RUNNING)) { + switch (sdev->sdev_state) { + case SDEV_OFFLINE: + /* + * If the device is offline we refuse to process any + * commands. The device must be brought online + * before trying any recovery commands. + */ sdev_printk(KERN_ERR, sdev, - "rejecting I/O to device being removed\n"); - goto kill; + "rejecting I/O to offline device\n"); + ret = BLKPREP_KILL; + break; + case SDEV_DEL: + /* + * If the device is fully deleted, we refuse to + * process any commands as well. + */ + sdev_printk(KERN_ERR, sdev, + "rejecting I/O to dead device\n"); + ret = BLKPREP_KILL; + break; + case SDEV_QUIESCE: + case SDEV_BLOCK: + /* + * If the devices is blocked we defer normal commands. + */ + if (!(req->cmd_flags & REQ_PREEMPT)) + ret = BLKPREP_DEFER; + break; + default: + /* + * For any other not fully online state we only allow + * special commands. In particular any user initiated + * command is not allowed. + */ + if (!(req->cmd_flags & REQ_PREEMPT)) + ret = BLKPREP_KILL; + break; } - - /* - * Now try and find a command block that we can use. - */ - if (!req->special) { - cmd = scsi_get_command(sdev, GFP_ATOMIC); - if (unlikely(!cmd)) - goto defer; - } else - cmd = req->special; - - /* pull a tag out of the request if we have one */ - cmd->tag = req->tag; - } else { - blk_dump_rq_flags(req, "SCSI bad req"); - goto kill; + + if (ret != BLKPREP_OK) + goto out; } - - /* note the overloading of req->special. When the tag - * is active it always means cmd. If the tag goes - * back for re-queueing, it may be reset */ - req->special = cmd; - cmd->request = req; - - /* - * FIXME: drop the lock here because the functions below - * expect to be called without the queue lock held. Also, - * previously, we dequeued the request before dropping the - * lock. We hope REQ_STARTED prevents anything untoward from - * happening now. - */ - if (blk_fs_request(req) || blk_pc_request(req)) { - int ret; + switch (req->cmd_type) { + case REQ_TYPE_BLOCK_PC: + ret = scsi_setup_blk_pc_cmnd(sdev, req); + break; + case REQ_TYPE_FS: + ret = scsi_setup_fs_cmnd(sdev, req); + break; + default: /* - * This will do a couple of things: - * 1) Fill in the actual SCSI command. - * 2) Fill in any other upper-level specific fields - * (timeout). + * All other command types are not supported. * - * If this returns 0, it means that the request failed - * (reading past end of disk, reading offline device, - * etc). This won't actually talk to the device, but - * some kinds of consistency checking may cause the - * request to be rejected immediately. + * Note that these days the SCSI subsystem does not use + * REQ_TYPE_SPECIAL requests anymore. These are only used + * (directly or via blk_insert_request) by non-SCSI drivers. */ + blk_dump_rq_flags(req, "SCSI bad req"); + ret = BLKPREP_KILL; + break; + } - /* - * This sets up the scatter-gather table (allocating if - * required). - */ - ret = scsi_init_io(cmd); - switch(ret) { - /* For BLKPREP_KILL/DEFER the cmd was released */ - case BLKPREP_KILL: - goto kill; - case BLKPREP_DEFER: - goto defer; - } - + out: + switch (ret) { + case BLKPREP_KILL: + req->errors = DID_NO_CONNECT << 16; + break; + case BLKPREP_DEFER: /* - * Initialize the actual SCSI command for this request. + * If we defer, the elv_next_request() returns NULL, but the + * queue must be restarted, so we plug here if no returning + * command will automatically do that. */ - if (blk_pc_request(req)) { - scsi_setup_blk_pc_cmnd(cmd); - } else if (req->rq_disk) { - struct scsi_driver *drv; - - drv = *(struct scsi_driver **)req->rq_disk->private_data; - if (unlikely(!drv->init_command(cmd))) { - scsi_release_buffers(cmd); - scsi_put_command(cmd); - goto kill; - } - } + if (sdev->device_busy == 0) + blk_plug_device(q); + break; + default: + req->cmd_flags |= REQ_DONTPREP; } - /* - * The request is now prepped, no need to come back here - */ - req->cmd_flags |= REQ_DONTPREP; - return BLKPREP_OK; - - defer: - /* If we defer, the elv_next_request() returns NULL, but the - * queue must be restarted, so we plug here if no returning - * command will automatically do that. */ - if (sdev->device_busy == 0) - blk_plug_device(q); - return BLKPREP_DEFER; - kill: - req->errors = DID_NO_CONNECT << 16; - return BLKPREP_KILL; + return ret; } /* diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h index 5d023d44e5e..f458c2f686d 100644 --- a/drivers/scsi/scsi_priv.h +++ b/drivers/scsi/scsi_priv.h @@ -39,6 +39,9 @@ static inline void scsi_log_completion(struct scsi_cmnd *cmd, int disposition) { }; #endif +/* scsi_scan.c */ +int scsi_complete_async_scans(void); + /* scsi_devinfo.c */ extern int scsi_get_device_flags(struct scsi_device *sdev, const unsigned char *vendor, diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 94a274645f6..aa1b1e0e9d2 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -29,7 +29,9 @@ #include <linux/moduleparam.h> #include <linux/init.h> #include <linux/blkdev.h> -#include <asm/semaphore.h> +#include <linux/delay.h> +#include <linux/kthread.h> +#include <linux/spinlock.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> @@ -87,6 +89,11 @@ module_param_named(max_luns, max_scsi_luns, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(max_luns, "last scsi LUN (should be between 1 and 2^32-1)"); +static char scsi_scan_type[6] = "sync"; + +module_param_string(scan, scsi_scan_type, sizeof(scsi_scan_type), S_IRUGO); +MODULE_PARM_DESC(scan, "sync, async or none"); + /* * max_scsi_report_luns: the maximum number of LUNS that will be * returned from the REPORT LUNS command. 8 times this value must @@ -108,6 +115,68 @@ MODULE_PARM_DESC(inq_timeout, "Timeout (in seconds) waiting for devices to answer INQUIRY." " Default is 5. Some non-compliant devices need more."); +static DEFINE_SPINLOCK(async_scan_lock); +static LIST_HEAD(scanning_hosts); + +struct async_scan_data { + struct list_head list; + struct Scsi_Host *shost; + struct completion prev_finished; +}; + +/** + * scsi_complete_async_scans - Wait for asynchronous scans to complete + * + * Asynchronous scans add themselves to the scanning_hosts list. Once + * that list is empty, we know that the scans are complete. Rather than + * waking up periodically to check the state of the list, we pretend to be + * a scanning task by adding ourselves at the end of the list and going to + * sleep. When the task before us wakes us up, we take ourselves off the + * list and return. + */ +int scsi_complete_async_scans(void) +{ + struct async_scan_data *data; + + do { + if (list_empty(&scanning_hosts)) + return 0; + /* If we can't get memory immediately, that's OK. Just + * sleep a little. Even if we never get memory, the async + * scans will finish eventually. + */ + data = kmalloc(sizeof(*data), GFP_KERNEL); + if (!data) + msleep(1); + } while (!data); + + data->shost = NULL; + init_completion(&data->prev_finished); + + spin_lock(&async_scan_lock); + /* Check that there's still somebody else on the list */ + if (list_empty(&scanning_hosts)) + goto done; + list_add_tail(&data->list, &scanning_hosts); + spin_unlock(&async_scan_lock); + + printk(KERN_INFO "scsi: waiting for bus probes to complete ...\n"); + wait_for_completion(&data->prev_finished); + + spin_lock(&async_scan_lock); + list_del(&data->list); + done: + spin_unlock(&async_scan_lock); + + kfree(data); + return 0; +} + +#ifdef MODULE +/* Only exported for the benefit of scsi_wait_scan */ +EXPORT_SYMBOL_GPL(scsi_complete_async_scans); +#endif + /** * scsi_unlock_floptical - unlock device via a special MODE SENSE command * @sdev: scsi device to send command to @@ -619,7 +688,7 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result, * SCSI_SCAN_LUN_PRESENT: a new scsi_device was allocated and initialized **/ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, - int *bflags) + int *bflags, int async) { /* * XXX do not save the inquiry, since it can change underneath us, @@ -805,7 +874,7 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, * register it and tell the rest of the kernel * about it. */ - if (scsi_sysfs_add_sdev(sdev) != 0) + if (!async && scsi_sysfs_add_sdev(sdev) != 0) return SCSI_SCAN_NO_RESPONSE; return SCSI_SCAN_LUN_PRESENT; @@ -974,7 +1043,7 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget, goto out_free_result; } - res = scsi_add_lun(sdev, result, &bflags); + res = scsi_add_lun(sdev, result, &bflags, shost->async_scan); if (res == SCSI_SCAN_LUN_PRESENT) { if (bflags & BLIST_KEY) { sdev->lockable = 0; @@ -1474,6 +1543,9 @@ void scsi_scan_target(struct device *parent, unsigned int channel, { struct Scsi_Host *shost = dev_to_shost(parent); + if (!shost->async_scan) + scsi_complete_async_scans(); + mutex_lock(&shost->scan_mutex); if (scsi_host_scan_allowed(shost)) __scsi_scan_target(parent, channel, id, lun, rescan); @@ -1519,6 +1591,9 @@ int scsi_scan_host_selected(struct Scsi_Host *shost, unsigned int channel, "%s: <%u:%u:%u>\n", __FUNCTION__, channel, id, lun)); + if (!shost->async_scan) + scsi_complete_async_scans(); + if (((channel != SCAN_WILD_CARD) && (channel > shost->max_channel)) || ((id != SCAN_WILD_CARD) && (id >= shost->max_id)) || ((lun != SCAN_WILD_CARD) && (lun > shost->max_lun))) @@ -1539,14 +1614,130 @@ int scsi_scan_host_selected(struct Scsi_Host *shost, unsigned int channel, return 0; } +static void scsi_sysfs_add_devices(struct Scsi_Host *shost) +{ + struct scsi_device *sdev; + shost_for_each_device(sdev, shost) { + if (scsi_sysfs_add_sdev(sdev) != 0) + scsi_destroy_sdev(sdev); + } +} + +/** + * scsi_prep_async_scan - prepare for an async scan + * @shost: the host which will be scanned + * Returns: a cookie to be passed to scsi_finish_async_scan() + * + * Tells the midlayer this host is going to do an asynchronous scan. + * It reserves the host's position in the scanning list and ensures + * that other asynchronous scans started after this one won't affect the + * ordering of the discovered devices. + */ +struct async_scan_data *scsi_prep_async_scan(struct Scsi_Host *shost) +{ + struct async_scan_data *data; + + if (strncmp(scsi_scan_type, "sync", 4) == 0) + return NULL; + + if (shost->async_scan) { + printk("%s called twice for host %d", __FUNCTION__, + shost->host_no); + dump_stack(); + return NULL; + } + + data = kmalloc(sizeof(*data), GFP_KERNEL); + if (!data) + goto err; + data->shost = scsi_host_get(shost); + if (!data->shost) + goto err; + init_completion(&data->prev_finished); + + spin_lock(&async_scan_lock); + shost->async_scan = 1; + if (list_empty(&scanning_hosts)) + complete(&data->prev_finished); + list_add_tail(&data->list, &scanning_hosts); + spin_unlock(&async_scan_lock); + + return data; + + err: + kfree(data); + return NULL; +} + +/** + * scsi_finish_async_scan - asynchronous scan has finished + * @data: cookie returned from earlier call to scsi_prep_async_scan() + * + * All the devices currently attached to this host have been found. + * This function announces all the devices it has found to the rest + * of the system. + */ +void scsi_finish_async_scan(struct async_scan_data *data) +{ + struct Scsi_Host *shost; + + if (!data) + return; + + shost = data->shost; + if (!shost->async_scan) { + printk("%s called twice for host %d", __FUNCTION__, + shost->host_no); + dump_stack(); + return; + } + + wait_for_completion(&data->prev_finished); + + scsi_sysfs_add_devices(shost); + + spin_lock(&async_scan_lock); + shost->async_scan = 0; + list_del(&data->list); + if (!list_empty(&scanning_hosts)) { + struct async_scan_data *next = list_entry(scanning_hosts.next, + struct async_scan_data, list); + complete(&next->prev_finished); + } + spin_unlock(&async_scan_lock); + + scsi_host_put(shost); + kfree(data); +} + +static int do_scan_async(void *_data) +{ + struct async_scan_data *data = _data; + scsi_scan_host_selected(data->shost, SCAN_WILD_CARD, SCAN_WILD_CARD, + SCAN_WILD_CARD, 0); + + scsi_finish_async_scan(data); + return 0; +} + /** * scsi_scan_host - scan the given adapter * @shost: adapter to scan **/ void scsi_scan_host(struct Scsi_Host *shost) { - scsi_scan_host_selected(shost, SCAN_WILD_CARD, SCAN_WILD_CARD, - SCAN_WILD_CARD, 0); + struct async_scan_data *data; + + if (strncmp(scsi_scan_type, "none", 4) == 0) + return; + + data = scsi_prep_async_scan(shost); + if (!data) { + scsi_scan_host_selected(shost, SCAN_WILD_CARD, SCAN_WILD_CARD, + SCAN_WILD_CARD, 0); + return; + } + kthread_run(do_scan_async, data, "scsi_scan_%d", shost->host_no); } EXPORT_SYMBOL(scsi_scan_host); diff --git a/drivers/scsi/scsi_wait_scan.c b/drivers/scsi/scsi_wait_scan.c new file mode 100644 index 00000000000..8a636103083 --- /dev/null +++ b/drivers/scsi/scsi_wait_scan.c @@ -0,0 +1,31 @@ +/* + * scsi_wait_scan.c + * + * Copyright (C) 2006 James Bottomley <James.Bottomley@SteelEye.com> + * + * This is a simple module to wait until all the async scans are + * complete. The idea is to use it in initrd/initramfs scripts. You + * modprobe it after all the modprobes of the root SCSI drivers and it + * will wait until they have all finished scanning their busses before + * allowing the boot to proceed + */ + +#include <linux/module.h> +#include "scsi_priv.h" + +static int __init wait_scan_init(void) +{ + scsi_complete_async_scans(); + return 0; +} + +static void __exit wait_scan_exit(void) +{ +} + +MODULE_DESCRIPTION("SCSI wait for scans"); +MODULE_AUTHOR("James Bottomley"); +MODULE_LICENSE("GPL"); + +late_initcall(wait_scan_init); +module_exit(wait_scan_exit); diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 84ff203ffed..f6a452846fa 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1051,6 +1051,14 @@ sd_spinup_disk(struct scsi_disk *sdkp, char *diskname) &sshdr, SD_TIMEOUT, SD_MAX_RETRIES); + /* + * If the drive has indicated to us that it + * doesn't have any media in it, don't bother + * with any more polling. + */ + if (media_not_present(sdkp, &sshdr)) + return; + if (the_result) sense_valid = scsi_sense_valid(&sshdr); retries++; @@ -1059,14 +1067,6 @@ sd_spinup_disk(struct scsi_disk *sdkp, char *diskname) ((driver_byte(the_result) & DRIVER_SENSE) && sense_valid && sshdr.sense_key == UNIT_ATTENTION))); - /* - * If the drive has indicated to us that it doesn't have - * any media in it, don't bother with any of the rest of - * this crap. - */ - if (media_not_present(sdkp, &sshdr)) - return; - if ((driver_byte(the_result) & DRIVER_SENSE) == 0) { /* no sense, TUR either succeeded or failed * with a status error */ @@ -1467,7 +1467,6 @@ sd_read_cache_type(struct scsi_disk *sdkp, char *diskname, res = sd_do_mode_sense(sdp, dbd, modepage, buffer, len, &data, &sshdr); if (scsi_status_is_good(res)) { - int ct = 0; int offset = data.header_length + data.block_descriptor_length; if (offset >= SD_BUF_SIZE - 2) { @@ -1496,11 +1495,13 @@ sd_read_cache_type(struct scsi_disk *sdkp, char *diskname, sdkp->DPOFUA = 0; } - ct = sdkp->RCD + 2*sdkp->WCE; - - printk(KERN_NOTICE "SCSI device %s: drive cache: %s%s\n", - diskname, sd_cache_types[ct], - sdkp->DPOFUA ? " w/ FUA" : ""); + printk(KERN_NOTICE "SCSI device %s: " + "write cache: %s, read cache: %s, %s\n", + diskname, + sdkp->WCE ? "enabled" : "disabled", + sdkp->RCD ? "disabled" : "enabled", + sdkp->DPOFUA ? "supports DPO and FUA" + : "doesn't support DPO or FUA"); return; } diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index e1a52c525ed..587274dd705 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -9,7 +9,7 @@ Steve Hirsch, Andreas Koppenh"ofer, Michael Leodolter, Eyal Lebedinsky, Michael Schaefer, J"org Weule, and Eric Youngdale. - Copyright 1992 - 2005 Kai Makisara + Copyright 1992 - 2006 Kai Makisara email Kai.Makisara@kolumbus.fi Some small formal changes - aeb, 950809 @@ -17,7 +17,7 @@ Last modified: 18-JAN-1998 Richard Gooch <rgooch@atnf.csiro.au> Devfs support */ -static const char *verstr = "20050830"; +static const char *verstr = "20061107"; #include <linux/module.h> @@ -999,7 +999,7 @@ static int check_tape(struct scsi_tape *STp, struct file *filp) STp->min_block = ((STp->buffer)->b_data[4] << 8) | (STp->buffer)->b_data[5]; if ( DEB( debugging || ) !STp->inited) - printk(KERN_WARNING + printk(KERN_INFO "%s: Block limits %d - %d bytes.\n", name, STp->min_block, STp->max_block); } else { @@ -1224,7 +1224,7 @@ static int st_flush(struct file *filp, fl_owner_t id) } DEBC( if (STp->nbr_requests) - printk(KERN_WARNING "%s: Number of r/w requests %d, dio used in %d, pages %d (%d).\n", + printk(KERN_DEBUG "%s: Number of r/w requests %d, dio used in %d, pages %d (%d).\n", name, STp->nbr_requests, STp->nbr_dio, STp->nbr_pages, STp->nbr_combinable)); if (STps->rw == ST_WRITING && !STp->pos_unknown) { @@ -4056,11 +4056,11 @@ static int st_probe(struct device *dev) goto out_free_tape; } - sdev_printk(KERN_WARNING, SDp, + sdev_printk(KERN_NOTICE, SDp, "Attached scsi tape %s\n", tape_name(tpnt)); - printk(KERN_WARNING "%s: try direct i/o: %s (alignment %d B)\n", - tape_name(tpnt), tpnt->try_dio ? "yes" : "no", - queue_dma_alignment(SDp->request_queue) + 1); + sdev_printk(KERN_INFO, SDp, "%s: try direct i/o: %s (alignment %d B)\n", + tape_name(tpnt), tpnt->try_dio ? "yes" : "no", + queue_dma_alignment(SDp->request_queue) + 1); return 0; diff --git a/drivers/scsi/t128.h b/drivers/scsi/t128.h index 646e840266e..76a069b7ac0 100644 --- a/drivers/scsi/t128.h +++ b/drivers/scsi/t128.h @@ -8,20 +8,20 @@ * drew@colorado.edu * +1 (303) 440-4894 * - * DISTRIBUTION RELEASE 3. + * DISTRIBUTION RELEASE 3. * - * For more information, please consult + * For more information, please consult * * Trantor Systems, Ltd. * T128/T128F/T228 SCSI Host Adapter * Hardware Specifications - * - * Trantor Systems, Ltd. + * + * Trantor Systems, Ltd. * 5415 Randall Place * Fremont, CA 94538 * 1+ (415) 770-1400, FAX 1+ (415) 770-9910 - * - * and + * + * and * * NCR 5380 Family * SCSI Protocol Controller @@ -48,15 +48,15 @@ #define TDEBUG_TRANSFER 0x2 /* - * The trantor boards are memory mapped. They use an NCR5380 or + * The trantor boards are memory mapped. They use an NCR5380 or * equivalent (my sample board had part second sourced from ZILOG). - * NCR's recommended "Pseudo-DMA" architecture is used, where + * NCR's recommended "Pseudo-DMA" architecture is used, where * a PAL drives the DMA signals on the 5380 allowing fast, blind - * transfers with proper handshaking. + * transfers with proper handshaking. */ /* - * Note : a boot switch is provided for the purpose of informing the + * Note : a boot switch is provided for the purpose of informing the * firmware to boot or not boot from attached SCSI devices. So, I imagine * there are fewer people who've yanked the ROM like they do on the Seagate * to make bootup faster, and I'll probably use this for autodetection. @@ -92,19 +92,20 @@ #define T_DATA_REG_OFFSET 0x1e00 /* rw 512 bytes long */ #ifndef ASM -static int t128_abort(Scsi_Cmnd *); +static int t128_abort(struct scsi_cmnd *); static int t128_biosparam(struct scsi_device *, struct block_device *, sector_t, int*); static int t128_detect(struct scsi_host_template *); -static int t128_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *)); -static int t128_bus_reset(Scsi_Cmnd *); +static int t128_queue_command(struct scsi_cmnd *, + void (*done)(struct scsi_cmnd *)); +static int t128_bus_reset(struct scsi_cmnd *); #ifndef CMD_PER_LUN #define CMD_PER_LUN 2 #endif #ifndef CAN_QUEUE -#define CAN_QUEUE 32 +#define CAN_QUEUE 32 #endif #ifndef HOSTS_C @@ -120,7 +121,7 @@ static int t128_bus_reset(Scsi_Cmnd *); #define T128_address(reg) (base + T_5380_OFFSET + ((reg) * 0x20)) -#if !(TDEBUG & TDEBUG_TRANSFER) +#if !(TDEBUG & TDEBUG_TRANSFER) #define NCR5380_read(reg) readb(T128_address(reg)) #define NCR5380_write(reg, value) writeb((value),(T128_address(reg))) #else @@ -129,7 +130,7 @@ static int t128_bus_reset(Scsi_Cmnd *); , instance->hostno, (reg), T128_address(reg))), readb(T128_address(reg))) #define NCR5380_write(reg, value) { \ - printk("scsi%d : write %02x to register %d at address %08x\n", \ + printk("scsi%d : write %02x to register %d at address %08x\n", \ instance->hostno, (value), (reg), T128_address(reg)); \ writeb((value), (T128_address(reg))); \ } @@ -142,10 +143,10 @@ static int t128_bus_reset(Scsi_Cmnd *); #define NCR5380_bus_reset t128_bus_reset #define NCR5380_proc_info t128_proc_info -/* 15 14 12 10 7 5 3 +/* 15 14 12 10 7 5 3 1101 0100 1010 1000 */ - -#define T128_IRQS 0xc4a8 + +#define T128_IRQS 0xc4a8 #endif /* else def HOSTS_C */ #endif /* ndef ASM */ |