aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi')
-rw-r--r--drivers/scsi/arm/Kconfig3
-rw-r--r--drivers/scsi/arm/scsi.h2
-rw-r--r--drivers/scsi/ata_piix.c5
-rw-r--r--drivers/scsi/libata-core.c34
-rw-r--r--drivers/scsi/libata-scsi.c13
-rw-r--r--drivers/scsi/sata_sil24.c1
6 files changed, 28 insertions, 30 deletions
diff --git a/drivers/scsi/arm/Kconfig b/drivers/scsi/arm/Kconfig
index 06d7601cdf5..d006a8cb4a7 100644
--- a/drivers/scsi/arm/Kconfig
+++ b/drivers/scsi/arm/Kconfig
@@ -69,6 +69,7 @@ comment "The following drivers are not fully supported"
config SCSI_CUMANA_1
tristate "CumanaSCSI I support (EXPERIMENTAL)"
depends on ARCH_ACORN && EXPERIMENTAL && SCSI
+ select SCSI_SPI_ATTRS
help
This enables support for the Cumana SCSI I card. If you have an
Acorn system with one of these, say Y. If unsure, say N.
@@ -76,6 +77,7 @@ config SCSI_CUMANA_1
config SCSI_ECOSCSI
tristate "EcoScsi support (EXPERIMENTAL)"
depends on ARCH_ACORN && EXPERIMENTAL && (ARCH_ARC || ARCH_A5K) && SCSI
+ select SCSI_SPI_ATTRS
help
This enables support for the EcoSCSI card -- a small card that sits
in the Econet socket. If you have an Acorn system with one of these,
@@ -84,6 +86,7 @@ config SCSI_ECOSCSI
config SCSI_OAK1
tristate "Oak SCSI support (EXPERIMENTAL)"
depends on ARCH_ACORN && EXPERIMENTAL && SCSI
+ select SCSI_SPI_ATTRS
help
This enables support for the Oak SCSI card. If you have an Acorn
system with one of these, say Y. If unsure, say N.
diff --git a/drivers/scsi/arm/scsi.h b/drivers/scsi/arm/scsi.h
index 6dd544a5eb5..8c2600ffc6a 100644
--- a/drivers/scsi/arm/scsi.h
+++ b/drivers/scsi/arm/scsi.h
@@ -74,7 +74,7 @@ static inline void init_SCp(Scsi_Cmnd *SCpnt)
unsigned long len = 0;
int buf;
- SCpnt->SCp.buffer = (struct scatterlist *) SCpnt->buffer;
+ SCpnt->SCp.buffer = (struct scatterlist *) SCpnt->request_buffer;
SCpnt->SCp.buffers_residual = SCpnt->use_sg - 1;
SCpnt->SCp.ptr = (char *)
(page_address(SCpnt->SCp.buffer->page) +
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index 19745a31072..5e8afc87698 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -567,8 +567,8 @@ static int piix_sata_prereset(struct ata_port *ap)
present = 1;
}
- DPRINTK("ata%u: LEAVE, pcs=0x%x present_mask=0x%x\n",
- ap->id, pcs, present_mask);
+ DPRINTK("ata%u: LEAVE, pcs=0x%x present=0x%x\n",
+ ap->id, pcs, present);
if (!present) {
ata_port_printk(ap, KERN_INFO, "SATA port has no device.\n");
@@ -828,6 +828,7 @@ static void __devinit piix_init_sata_map(struct pci_dev *pdev,
case IDE:
WARN_ON((i & 1) || map[i + 1] != IDE);
pinfo[i / 2] = piix_port_info[ich5_pata];
+ pinfo[i / 2].private_data = hpriv;
i++;
printk(" IDE IDE");
break;
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 386e5f21e19..16fc2dd8f2f 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -5185,28 +5185,6 @@ void ata_host_stop (struct ata_host_set *host_set)
iounmap(host_set->mmio_base);
}
-
-/**
- * ata_host_remove - Unregister SCSI host structure with upper layers
- * @ap: Port to unregister
- * @do_unregister: 1 if we fully unregister, 0 to just stop the port
- *
- * LOCKING:
- * Inherited from caller.
- */
-
-static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister)
-{
- struct Scsi_Host *sh = ap->host;
-
- DPRINTK("ENTER\n");
-
- if (do_unregister)
- scsi_remove_host(sh);
-
- ap->ops->port_stop(ap);
-}
-
/**
* ata_dev_init - Initialize an ata_device structure
* @dev: Device structure to initialize
@@ -5532,8 +5510,11 @@ int ata_device_add(const struct ata_probe_ent *ent)
err_out:
for (i = 0; i < count; i++) {
- ata_host_remove(host_set->ports[i], 1);
- scsi_host_put(host_set->ports[i]->host);
+ struct ata_port *ap = host_set->ports[i];
+ if (ap) {
+ ap->ops->port_stop(ap);
+ scsi_host_put(ap->host);
+ }
}
err_free_ret:
kfree(host_set);
@@ -5558,7 +5539,7 @@ void ata_port_detach(struct ata_port *ap)
int i;
if (!ap->ops->error_handler)
- return;
+ goto skip_eh;
/* tell EH we're leaving & flush EH */
spin_lock_irqsave(ap->lock, flags);
@@ -5594,6 +5575,7 @@ void ata_port_detach(struct ata_port *ap)
cancel_delayed_work(&ap->hotplug_task);
flush_workqueue(ata_aux_wq);
+ skip_eh:
/* remove the associated SCSI host */
scsi_remove_host(ap->host);
}
@@ -5662,7 +5644,7 @@ int ata_scsi_release(struct Scsi_Host *host)
DPRINTK("ENTER\n");
ap->ops->port_disable(ap);
- ata_host_remove(ap, 0);
+ ap->ops->port_stop(ap);
DPRINTK("EXIT\n");
return 1;
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 7ced41ecde8..e92c31d698f 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -2353,6 +2353,19 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc)
ata_gen_ata_desc_sense(qc);
}
+ /* SCSI EH automatically locks door if sdev->locked is
+ * set. Sometimes door lock request continues to
+ * fail, for example, when no media is present. This
+ * creates a loop - SCSI EH issues door lock which
+ * fails and gets invoked again to acquire sense data
+ * for the failed command.
+ *
+ * If door lock fails, always clear sdev->locked to
+ * avoid this infinite loop.
+ */
+ if (qc->cdb[0] == ALLOW_MEDIUM_REMOVAL)
+ qc->dev->sdev->locked = 0;
+
qc->scsicmd->result = SAM_STAT_CHECK_CONDITION;
qc->scsidone(cmd);
ata_qc_free(qc);
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index 2e0f4a4076a..3f368c7d3ef 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -1106,7 +1106,6 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
probe_ent->irq = pdev->irq;
probe_ent->irq_flags = IRQF_SHARED;
- probe_ent->mmio_base = port_base;
probe_ent->private_data = hpriv;
hpriv->host_base = host_base;
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-22 16:48:50 +0000