diff options
Diffstat (limited to 'drivers/serial/bfin_5xx.c')
| -rw-r--r-- | drivers/serial/bfin_5xx.c | 80 |
1 files changed, 28 insertions, 52 deletions
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index d6b4ead693b..fd9bb777df2 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -49,6 +49,7 @@ #define DMA_RX_YCOUNT (PAGE_SIZE / DMA_RX_XCOUNT) #define DMA_RX_FLUSH_JIFFIES (HZ / 50) +#define CTS_CHECK_JIFFIES (HZ / 50) #ifdef CONFIG_SERIAL_BFIN_DMA static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart); @@ -290,11 +291,6 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart) { struct circ_buf *xmit = &uart->port.info->xmit; - if (uart->port.x_char) { - UART_PUT_CHAR(uart, uart->port.x_char); - uart->port.icount.tx++; - uart->port.x_char = 0; - } /* * Check the modem control lines before * transmitting anything. @@ -306,6 +302,12 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart) return; } + if (uart->port.x_char) { + UART_PUT_CHAR(uart, uart->port.x_char); + uart->port.icount.tx++; + uart->port.x_char = 0; + } + while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) { UART_PUT_CHAR(uart, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); @@ -345,15 +347,6 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id) } #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS -static void bfin_serial_do_work(struct work_struct *work) -{ - struct bfin_serial_port *uart = container_of(work, struct bfin_serial_port, cts_workqueue); - - bfin_serial_mctrl_check(uart); -} -#endif - #ifdef CONFIG_SERIAL_BFIN_DMA static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) { @@ -361,6 +354,12 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) uart->tx_done = 0; + /* + * Check the modem control lines before + * transmitting anything. + */ + bfin_serial_mctrl_check(uart); + if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { uart->tx_count = 0; uart->tx_done = 1; @@ -373,12 +372,6 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) uart->port.x_char = 0; } - /* - * Check the modem control lines before - * transmitting anything. - */ - bfin_serial_mctrl_check(uart); - uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE); if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail)) uart->tx_count = UART_XMIT_SIZE - xmit->tail; @@ -530,11 +523,7 @@ static unsigned int bfin_serial_get_mctrl(struct uart_port *port) if (uart->cts_pin < 0) return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; -# ifdef BF54x - if (UART_GET_MSR(uart) & CTS) -# else - if (gpio_get_value(uart->cts_pin)) -# endif + if (UART_GET_CTS(uart)) return TIOCM_DSR | TIOCM_CAR; else #endif @@ -549,17 +538,9 @@ static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) return; if (mctrl & TIOCM_RTS) -# ifdef BF54x - UART_PUT_MCR(uart, UART_GET_MCR(uart) & ~MRTS); -# else - gpio_set_value(uart->rts_pin, 0); -# endif + UART_CLEAR_RTS(uart); else -# ifdef BF54x - UART_PUT_MCR(uart, UART_GET_MCR(uart) | MRTS); -# else - gpio_set_value(uart->rts_pin, 1); -# endif + UART_SET_RTS(uart); #endif } @@ -577,7 +558,10 @@ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart) uart_handle_cts_change(&uart->port, status & TIOCM_CTS); if (!(status & TIOCM_CTS)) { tty->hw_stopped = 1; - schedule_work(&uart->cts_workqueue); + uart->cts_timer.data = (unsigned long)(uart); + uart->cts_timer.function = (void *)bfin_serial_mctrl_check; + uart->cts_timer.expires = jiffies + CTS_CHECK_JIFFIES; + add_timer(&(uart->cts_timer)); } else { tty->hw_stopped = 0; } @@ -752,11 +736,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, /* Disable UART */ ier = UART_GET_IER(uart); -#ifdef CONFIG_BF54x - UART_CLEAR_IER(uart, 0xF); -#else - UART_PUT_IER(uart, 0); -#endif + UART_DISABLE_INTS(uart); /* Set DLAB in LCR to Access DLL and DLH */ UART_SET_DLAB(uart); @@ -771,11 +751,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, UART_PUT_LCR(uart, lcr); /* Enable UART */ -#ifdef CONFIG_BF54x - UART_SET_IER(uart, ier); -#else - UART_PUT_IER(uart, ier); -#endif + UART_ENABLE_INTS(uart, ier); val = UART_GET_GCTL(uart); val |= UCEN; @@ -833,15 +809,15 @@ bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser) * Enable the IrDA function if tty->ldisc.num is N_IRDA. * In other cases, disable IrDA function. */ -static void bfin_set_ldisc(struct tty_struct *tty) +static void bfin_serial_set_ldisc(struct uart_port *port) { - int line = tty->index; + int line = port->line; unsigned short val; - if (line >= tty->driver->num) + if (line >= port->info->tty->driver->num) return; - switch (tty->ldisc.num) { + switch (port->info->tty->ldisc.num) { case N_IRDA: val = UART_GET_GCTL(&bfin_serial_ports[line]); val |= (IREN | RPOLC); @@ -866,6 +842,7 @@ static struct uart_ops bfin_serial_pops = { .startup = bfin_serial_startup, .shutdown = bfin_serial_shutdown, .set_termios = bfin_serial_set_termios, + .set_ldisc = bfin_serial_set_ldisc, .type = bfin_serial_type, .release_port = bfin_serial_release_port, .request_port = bfin_serial_request_port, @@ -904,7 +881,7 @@ static void __init bfin_serial_init_ports(void) init_timer(&(bfin_serial_ports[i].rx_dma_timer)); #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS - INIT_WORK(&bfin_serial_ports[i].cts_workqueue, bfin_serial_do_work); + init_timer(&(bfin_serial_ports[i].cts_timer)); bfin_serial_ports[i].cts_pin = bfin_serial_resource[i].uart_cts_pin; bfin_serial_ports[i].rts_pin = @@ -1206,7 +1183,6 @@ static int __init bfin_serial_init(void) ret = uart_register_driver(&bfin_serial_reg); if (ret == 0) { - bfin_serial_reg.tty_driver->set_ldisc = bfin_set_ldisc; ret = platform_driver_register(&bfin_serial_driver); if (ret) { pr_debug("uart register failed\n"); |