diff options
Diffstat (limited to 'drivers/serial')
-rw-r--r-- | drivers/serial/68328serial.c | 102 | ||||
-rw-r--r-- | drivers/serial/crisv10.c | 6 | ||||
-rw-r--r-- | drivers/serial/jsm/jsm_tty.c | 7 |
3 files changed, 44 insertions, 71 deletions
diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c index b88a7c1158a..bff94541991 100644 --- a/drivers/serial/68328serial.c +++ b/drivers/serial/68328serial.c @@ -131,17 +131,6 @@ static int m68328_console_baud = CONSOLE_BAUD_RATE; static int m68328_console_cbaud = DEFAULT_CBAUD; -/* - * tmp_buf is used as a temporary buffer by serial_write. We need to - * lock it in case the memcpy_fromfs blocks while swapping in a page, - * and some other program tries to do a serial write at the same time. - * Since the lock will only come under contention when the system is - * swapping and available memory is low, it makes sense to share one - * buffer across all the serial ports, since it significantly saves - * memory if large numbers of serial ports are open. - */ -static unsigned char tmp_buf[SERIAL_XMIT_SIZE]; /* This is cheating */ - static inline int serial_paranoia_check(struct m68k_serial *info, char *name, const char *routine) { @@ -211,16 +200,16 @@ static void rs_stop(struct tty_struct *tty) if (serial_paranoia_check(info, tty->name, "rs_stop")) return; - save_flags(flags); cli(); + local_irq_save(flags); uart->ustcnt &= ~USTCNT_TXEN; - restore_flags(flags); + local_irq_restore(flags); } static void rs_put_char(char ch) { int flags, loops = 0; - save_flags(flags); cli(); + local_irq_save(flags); while (!(UTX & UTX_TX_AVAIL) && (loops < 1000)) { loops++; @@ -229,7 +218,7 @@ static void rs_put_char(char ch) UTX_TXDATA = ch; udelay(5); - restore_flags(flags); + local_irq_restore(flags); } static void rs_start(struct tty_struct *tty) @@ -241,7 +230,7 @@ static void rs_start(struct tty_struct *tty) if (serial_paranoia_check(info, tty->name, "rs_start")) return; - save_flags(flags); cli(); + local_irq_save(flags); if (info->xmit_cnt && info->xmit_buf && !(uart->ustcnt & USTCNT_TXEN)) { #ifdef USE_INTS uart->ustcnt |= USTCNT_TXEN | USTCNT_TX_INTR_MASK; @@ -249,7 +238,7 @@ static void rs_start(struct tty_struct *tty) uart->ustcnt |= USTCNT_TXEN; #endif } - restore_flags(flags); + local_irq_restore(flags); } /* Drop into either the boot monitor or kadb upon receiving a break @@ -327,14 +316,6 @@ static void receive_chars(struct m68k_serial *info, struct pt_regs *regs, if(!tty) goto clear_and_exit; - /* - * Make sure that we do not overflow the buffer - */ - if (tty_request_buffer_room(tty, 1) == 0) { - tty_schedule_flip(tty); - return; - } - flag = TTY_NORMAL; if(rx & URX_PARITY_ERROR) { @@ -473,7 +454,7 @@ static int startup(struct m68k_serial * info) return -ENOMEM; } - save_flags(flags); cli(); + local_irq_save(flags); /* * Clear the FIFO buffers and disable them @@ -506,7 +487,7 @@ static int startup(struct m68k_serial * info) change_speed(info); info->flags |= S_INITIALIZED; - restore_flags(flags); + local_irq_restore(flags); return 0; } @@ -523,7 +504,7 @@ static void shutdown(struct m68k_serial * info) if (!(info->flags & S_INITIALIZED)) return; - save_flags(flags); cli(); /* Disable interrupts */ + local_irq_save(flags); if (info->xmit_buf) { free_page((unsigned long) info->xmit_buf); @@ -534,7 +515,7 @@ static void shutdown(struct m68k_serial * info) set_bit(TTY_IO_ERROR, &info->tty->flags); info->flags &= ~S_INITIALIZED; - restore_flags(flags); + local_irq_restore(flags); } struct { @@ -655,24 +636,24 @@ static void rs_fair_output(void) if (info == 0) return; if (info->xmit_buf == 0) return; - save_flags(flags); cli(); + local_irq_save(flags); left = info->xmit_cnt; while (left != 0) { c = info->xmit_buf[info->xmit_tail]; info->xmit_tail = (info->xmit_tail+1) & (SERIAL_XMIT_SIZE-1); info->xmit_cnt--; - restore_flags(flags); + local_irq_restore(flags); rs_put_char(c); - save_flags(flags); cli(); + local_irq_save(flags); left = min(info->xmit_cnt, left-1); } /* Last character is being transmitted now (hopefully). */ udelay(5); - restore_flags(flags); + local_irq_restore(flags); return; } @@ -720,11 +701,11 @@ static void rs_flush_chars(struct tty_struct *tty) #endif /* Enable transmitter */ - save_flags(flags); cli(); + local_irq_save(flags); if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || !info->xmit_buf) { - restore_flags(flags); + local_irq_restore(flags); return; } @@ -749,7 +730,7 @@ static void rs_flush_chars(struct tty_struct *tty) while (!(uart->utx.w & UTX_TX_AVAIL)) udelay(5); } #endif - restore_flags(flags); + local_irq_restore(flags); } extern void console_printn(const char * b, int count); @@ -768,18 +749,22 @@ static int rs_write(struct tty_struct * tty, if (!tty || !info->xmit_buf) return 0; - save_flags(flags); + local_save_flags(flags); while (1) { - cli(); + local_irq_disable(); c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, SERIAL_XMIT_SIZE - info->xmit_head)); + local_irq_restore(flags); + if (c <= 0) break; memcpy(info->xmit_buf + info->xmit_head, buf, c); + + local_irq_disable(); info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1); info->xmit_cnt += c; - restore_flags(flags); + local_irq_restore(flags); buf += c; count -= c; total += c; @@ -787,7 +772,7 @@ static int rs_write(struct tty_struct * tty, if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) { /* Enable transmitter */ - cli(); + local_irq_disable(); #ifndef USE_INTS while(info->xmit_cnt) { #endif @@ -807,9 +792,9 @@ static int rs_write(struct tty_struct * tty, #ifndef USE_INTS } #endif - restore_flags(flags); + local_irq_restore(flags); } - restore_flags(flags); + return total; } @@ -838,12 +823,13 @@ static int rs_chars_in_buffer(struct tty_struct *tty) static void rs_flush_buffer(struct tty_struct *tty) { struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + unsigned long flags; if (serial_paranoia_check(info, tty->name, "rs_flush_buffer")) return; - cli(); + local_irq_save(flags); info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - sti(); + local_irq_restore(flags); tty_wakeup(tty); } @@ -973,14 +959,15 @@ static int get_lsr_info(struct m68k_serial * info, unsigned int *value) m68328_uart *uart = &uart_addr[info->line]; #endif unsigned char status; + unsigned long flags; - cli(); + local_irq_save(flags); #ifdef CONFIG_SERIAL_68328_RTS_CTS status = (uart->utx.w & UTX_CTS_STAT) ? 1 : 0; #else status = 0; #endif - sti(); + local_irq_restore(flags); put_user(status,value); return 0; } @@ -994,14 +981,13 @@ static void send_break(struct m68k_serial * info, unsigned int duration) unsigned long flags; if (!info->port) return; - save_flags(flags); - cli(); + local_irq_save(flags); #ifdef USE_INTS uart->utx.w |= UTX_SEND_BREAK; msleep_interruptible(duration); uart->utx.w &= ~UTX_SEND_BREAK; #endif - restore_flags(flags); + local_irq_restore(flags); } static int rs_ioctl(struct tty_struct *tty, struct file * file, @@ -1060,7 +1046,7 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file, (struct serial_struct *) arg); case TIOCSERGETLSR: /* Get line status register */ if (access_ok(VERIFY_WRITE, (void *) arg, - sizeof(unsigned int)); + sizeof(unsigned int))) return get_lsr_info(info, (unsigned int *) arg); return -EFAULT; case TIOCSERGSTRUCT: @@ -1113,10 +1099,10 @@ static void rs_close(struct tty_struct *tty, struct file * filp) if (!info || serial_paranoia_check(info, tty->name, "rs_close")) return; - save_flags(flags); cli(); + local_irq_save(flags); if (tty_hung_up_p(filp)) { - restore_flags(flags); + local_irq_restore(flags); return; } @@ -1138,7 +1124,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp) info->count = 0; } if (info->count) { - restore_flags(flags); + local_irq_restore(flags); return; } info->flags |= S_CLOSING; @@ -1186,7 +1172,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp) } info->flags &= ~(S_NORMAL_ACTIVE|S_CLOSING); wake_up_interruptible(&info->close_wait); - restore_flags(flags); + local_irq_restore(flags); } /* @@ -1262,9 +1248,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, info->count--; info->blocked_open++; while (1) { - cli(); + local_irq_disable(); m68k_rtsdtr(info, 1); - sti(); + local_irq_enable(); current->state = TASK_INTERRUPTIBLE; if (tty_hung_up_p(filp) || !(info->flags & S_INITIALIZED)) { @@ -1444,7 +1430,7 @@ rs68328_init(void) return -ENOMEM; } - save_flags(flags); cli(); + local_irq_save(flags); for(i=0;i<NR_PORTS;i++) { @@ -1489,7 +1475,7 @@ rs68328_init(void) serial_pm[i]->data = info; #endif } - restore_flags(flags); + local_irq_restore(flags); return 0; } diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c index 89700141f87..5cacc5e74a9 100644 --- a/drivers/serial/crisv10.c +++ b/drivers/serial/crisv10.c @@ -2573,12 +2573,6 @@ static void flush_to_flip_buffer(struct e100_serial *info) DFLIP( if (1) { - - if (test_bit(TTY_DONT_FLIP, &tty->flags)) { - DEBUG_LOG(info->line, "*** TTY_DONT_FLIP set flip.count %i ***\n", tty->flip.count); - DEBUG_LOG(info->line, "*** recv_cnt %i\n", info->recv_cnt); - } else { - } DEBUG_LOG(info->line, "*** rxtot %i\n", info->icount.rx); DEBUG_LOG(info->line, "ldisc %lu\n", tty->ldisc.chars_in_buffer(tty)); DEBUG_LOG(info->line, "room %lu\n", tty->ldisc.receive_room(tty)); diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c index 7d823705193..f8262e6ad8d 100644 --- a/drivers/serial/jsm/jsm_tty.c +++ b/drivers/serial/jsm/jsm_tty.c @@ -589,13 +589,6 @@ void jsm_input(struct jsm_channel *ch) ld = tty_ldisc_ref(tp); /* - * If the DONT_FLIP flag is on, don't flush our buffer, and act - * like the ld doesn't have any space to put the data right now. - */ - if (test_bit(TTY_DONT_FLIP, &tp->flags)) - len = 0; - - /* * If we were unable to get a reference to the ld, * don't flush our buffer, and act like the ld doesn't * have any space to put the data right now. |