aboutsummaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/imx.c68
1 files changed, 60 insertions, 8 deletions
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index c682c6308cd..01a8726a3f9 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -321,18 +321,39 @@ static void imx_break_ctl(struct uart_port *port, int break_state)
#define TXTL 2 /* reset default */
#define RXTL 1 /* reset default */
+static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
+{
+ unsigned int val;
+ unsigned int ufcr_rfdiv;
+
+ /* set receiver / transmitter trigger level.
+ * RFDIV is set such way to satisfy requested uartclk value
+ */
+ val = TXTL<<10 | RXTL;
+ ufcr_rfdiv = (imx_get_perclk1() + sport->port.uartclk / 2) / sport->port.uartclk;
+
+ if(!ufcr_rfdiv)
+ ufcr_rfdiv = 1;
+
+ if(ufcr_rfdiv >= 7)
+ ufcr_rfdiv = 6;
+ else
+ ufcr_rfdiv = 6 - ufcr_rfdiv;
+
+ val |= UFCR_RFDIV & (ufcr_rfdiv << 7);
+
+ UFCR((u32)sport->port.membase) = val;
+
+ return 0;
+}
+
static int imx_startup(struct uart_port *port)
{
struct imx_port *sport = (struct imx_port *)port;
int retval;
- unsigned int val;
unsigned long flags;
- /* set receiver / transmitter trigger level. We assume
- * that RFDIV has been set by the arch setup or by the bootloader.
- */
- val = (UFCR((u32)sport->port.membase) & UFCR_RFDIV) | TXTL<<10 | RXTL;
- UFCR((u32)sport->port.membase) = val;
+ imx_setup_ufcr(sport, 0);
/* disable the DREN bit (Data Ready interrupt enable) before
* requesting IRQs
@@ -737,9 +758,12 @@ static void __init
imx_console_get_options(struct imx_port *sport, int *baud,
int *parity, int *bits)
{
+
if ( UCR1((u32)sport->port.membase) | UCR1_UARTEN ) {
/* ok, the port was enabled */
unsigned int ucr2, ubir,ubmr, uartclk;
+ unsigned int baud_raw;
+ unsigned int ucfr_rfdiv;
ucr2 = UCR2((u32)sport->port.membase);
@@ -758,9 +782,35 @@ imx_console_get_options(struct imx_port *sport, int *baud,
ubir = UBIR((u32)sport->port.membase) & 0xffff;
ubmr = UBMR((u32)sport->port.membase) & 0xffff;
- uartclk = sport->port.uartclk;
- *baud = ((uartclk/16) * (ubir + 1)) / (ubmr + 1);
+
+ ucfr_rfdiv = (UFCR((u32)sport->port.membase) & UFCR_RFDIV) >> 7;
+ if (ucfr_rfdiv == 6)
+ ucfr_rfdiv = 7;
+ else
+ ucfr_rfdiv = 6 - ucfr_rfdiv;
+
+ uartclk = imx_get_perclk1();
+ uartclk /= ucfr_rfdiv;
+
+ { /*
+ * The next code provides exact computation of
+ * baud_raw = round(((uartclk/16) * (ubir + 1)) / (ubmr + 1))
+ * without need of float support or long long division,
+ * which would be required to prevent 32bit arithmetic overflow
+ */
+ unsigned int mul = ubir + 1;
+ unsigned int div = 16 * (ubmr + 1);
+ unsigned int rem = uartclk % div;
+
+ baud_raw = (uartclk / div) * mul;
+ baud_raw += (rem * mul + div / 2) / div;
+ *baud = (baud_raw + 50) / 100 * 100;
+ }
+
+ if(*baud != baud_raw)
+ printk(KERN_INFO "Serial: Console IMX rounded baud rate from %d to %d\n",
+ baud_raw, *baud);
}
}
@@ -787,6 +837,8 @@ imx_console_setup(struct console *co, char *options)
else
imx_console_get_options(sport, &baud, &parity, &bits);
+ imx_setup_ufcr(sport, 0);
+
return uart_set_options(&sport->port, co, baud, parity, bits, flow);
}