aboutsummaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/21285.c541
-rw-r--r--drivers/serial/68328serial.c1614
-rw-r--r--drivers/serial/68328serial.h194
-rw-r--r--drivers/serial/68360serial.c3027
-rw-r--r--drivers/serial/8250.c2632
-rw-r--r--drivers/serial/8250.h87
-rw-r--r--drivers/serial/8250_acorn.c142
-rw-r--r--drivers/serial/8250_acpi.c171
-rw-r--r--drivers/serial/8250_early.c255
-rw-r--r--drivers/serial/8250_gsc.c120
-rw-r--r--drivers/serial/8250_hp300.c329
-rw-r--r--drivers/serial/8250_pci.c2303
-rw-r--r--drivers/serial/8250_pnp.c457
-rw-r--r--drivers/serial/Kconfig846
-rw-r--r--drivers/serial/Makefile54
-rw-r--r--drivers/serial/amba-pl010.c840
-rw-r--r--drivers/serial/amba-pl011.c869
-rw-r--r--drivers/serial/au1x00_uart.c1312
-rw-r--r--drivers/serial/bast_sio.c80
-rw-r--r--drivers/serial/clps711x.c609
-rw-r--r--drivers/serial/cpm_uart/Makefile11
-rw-r--r--drivers/serial/cpm_uart/cpm_uart.h89
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_core.c1177
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_cpm1.c290
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_cpm1.h45
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_cpm2.c328
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_cpm2.h45
-rw-r--r--drivers/serial/crisv10.c5059
-rw-r--r--drivers/serial/crisv10.h137
-rw-r--r--drivers/serial/dz.c822
-rw-r--r--drivers/serial/dz.h118
-rw-r--r--drivers/serial/icom.c1691
-rw-r--r--drivers/serial/icom.h290
-rw-r--r--drivers/serial/imx.c909
-rw-r--r--drivers/serial/ioc4_serial.c2909
-rw-r--r--drivers/serial/ip22zilog.c1271
-rw-r--r--drivers/serial/ip22zilog.h281
-rw-r--r--drivers/serial/jsm/Makefile8
-rw-r--r--drivers/serial/jsm/jsm.h437
-rw-r--r--drivers/serial/jsm/jsm_driver.c404
-rw-r--r--drivers/serial/jsm/jsm_neo.c1427
-rw-r--r--drivers/serial/jsm/jsm_tty.c1038
-rw-r--r--drivers/serial/m32r_sio.c1218
-rw-r--r--drivers/serial/m32r_sio.h55
-rw-r--r--drivers/serial/m32r_sio_reg.h153
-rw-r--r--drivers/serial/mcfserial.c1883
-rw-r--r--drivers/serial/mcfserial.h75
-rw-r--r--drivers/serial/mpc52xx_uart.c852
-rw-r--r--drivers/serial/mpsc.c1832
-rw-r--r--drivers/serial/mpsc.h289
-rw-r--r--drivers/serial/mux.c539
-rw-r--r--drivers/serial/pmac_zilog.c2048
-rw-r--r--drivers/serial/pmac_zilog.h382
-rw-r--r--drivers/serial/pxa.c877
-rw-r--r--drivers/serial/s3c2410.c1831
-rw-r--r--drivers/serial/sa1100.c952
-rw-r--r--drivers/serial/serial_core.c2395
-rw-r--r--drivers/serial/serial_cs.c747
-rw-r--r--drivers/serial/serial_lh7a40x.c711
-rw-r--r--drivers/serial/serial_txx9.c1171
-rw-r--r--drivers/serial/sh-sci.c1692
-rw-r--r--drivers/serial/sh-sci.h573
-rw-r--r--drivers/serial/sn_console.c1124
-rw-r--r--drivers/serial/suncore.c218
-rw-r--r--drivers/serial/suncore.h29
-rw-r--r--drivers/serial/sunsab.c1171
-rw-r--r--drivers/serial/sunsab.h321
-rw-r--r--drivers/serial/sunsu.c1742
-rw-r--r--drivers/serial/sunzilog.c1773
-rw-r--r--drivers/serial/sunzilog.h272
-rw-r--r--drivers/serial/uart00.c782
-rw-r--r--drivers/serial/v850e_uart.c549
-rw-r--r--drivers/serial/vr41xx_siu.c1100
73 files changed, 64624 insertions, 0 deletions
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
new file mode 100644
index 00000000000..f8504b0adeb
--- /dev/null
+++ b/drivers/serial/21285.c
@@ -0,0 +1,541 @@
+/*
+ * linux/drivers/char/21285.c
+ *
+ * Driver for the serial port on the 21285 StrongArm-110 core logic chip.
+ *
+ * Based on drivers/char/serial.c
+ *
+ * $Id: 21285.c,v 1.37 2002/07/28 10:03:27 rmk Exp $
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/device.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/dec21285.h>
+#include <asm/hardware.h>
+
+#define BAUD_BASE (mem_fclk_21285/64)
+
+#define SERIAL_21285_NAME "ttyFB"
+#define SERIAL_21285_MAJOR 204
+#define SERIAL_21285_MINOR 4
+
+#define RXSTAT_DUMMY_READ 0x80000000
+#define RXSTAT_FRAME (1 << 0)
+#define RXSTAT_PARITY (1 << 1)
+#define RXSTAT_OVERRUN (1 << 2)
+#define RXSTAT_ANYERR (RXSTAT_FRAME|RXSTAT_PARITY|RXSTAT_OVERRUN)
+
+#define H_UBRLCR_BREAK (1 << 0)
+#define H_UBRLCR_PARENB (1 << 1)
+#define H_UBRLCR_PAREVN (1 << 2)
+#define H_UBRLCR_STOPB (1 << 3)
+#define H_UBRLCR_FIFO (1 << 4)
+
+static const char serial21285_name[] = "Footbridge UART";
+
+#define tx_enabled(port) ((port)->unused[0])
+#define rx_enabled(port) ((port)->unused[1])
+
+/*
+ * The documented expression for selecting the divisor is:
+ * BAUD_BASE / baud - 1
+ * However, typically BAUD_BASE is not divisible by baud, so
+ * we want to select the divisor that gives us the minimum
+ * error. Therefore, we want:
+ * int(BAUD_BASE / baud - 0.5) ->
+ * int(BAUD_BASE / baud - (baud >> 1) / baud) ->
+ * int((BAUD_BASE - (baud >> 1)) / baud)
+ */
+
+static void
+serial21285_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ if (tx_enabled(port)) {
+ disable_irq(IRQ_CONTX);
+ tx_enabled(port) = 0;
+ }
+}
+
+static void
+serial21285_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+ if (!tx_enabled(port)) {
+ enable_irq(IRQ_CONTX);
+ tx_enabled(port) = 1;
+ }
+}
+
+static void serial21285_stop_rx(struct uart_port *port)
+{
+ if (rx_enabled(port)) {
+ disable_irq(IRQ_CONRX);
+ rx_enabled(port) = 0;
+ }
+}
+
+static void serial21285_enable_ms(struct uart_port *port)
+{
+}
+
+static irqreturn_t serial21285_rx_chars(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct uart_port *port = dev_id;
+ struct tty_struct *tty = port->info->tty;
+ unsigned int status, ch, flag, rxs, max_count = 256;
+
+ status = *CSR_UARTFLG;
+ while (!(status & 0x10) && max_count--) {
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
+ if (tty->low_latency)
+ tty_flip_buffer_push(tty);
+ /*
+ * If this failed then we will throw away the
+ * bytes but must do so to clear interrupts
+ */
+ }
+
+ ch = *CSR_UARTDR;
+ flag = TTY_NORMAL;
+ port->icount.rx++;
+
+ rxs = *CSR_RXSTAT | RXSTAT_DUMMY_READ;
+ if (rxs & RXSTAT_ANYERR) {
+ if (rxs & RXSTAT_PARITY)
+ port->icount.parity++;
+ else if (rxs & RXSTAT_FRAME)
+ port->icount.frame++;
+ if (rxs & RXSTAT_OVERRUN)
+ port->icount.overrun++;
+
+ rxs &= port->read_status_mask;
+
+ if (rxs & RXSTAT_PARITY)
+ flag = TTY_PARITY;
+ else if (rxs & RXSTAT_FRAME)
+ flag = TTY_FRAME;
+ }
+
+ if ((rxs & port->ignore_status_mask) == 0) {
+ tty_insert_flip_char(tty, ch, flag);
+ }
+ if ((rxs & RXSTAT_OVERRUN) &&
+ tty->flip.count < TTY_FLIPBUF_SIZE) {
+ /*
+ * Overrun is special, since it's reported
+ * immediately, and doesn't affect the current
+ * character.
+ */
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ }
+ status = *CSR_UARTFLG;
+ }
+ tty_flip_buffer_push(tty);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t serial21285_tx_chars(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct uart_port *port = dev_id;
+ struct circ_buf *xmit = &port->info->xmit;
+ int count = 256;
+
+ if (port->x_char) {
+ *CSR_UARTDR = port->x_char;
+ port->icount.tx++;
+ port->x_char = 0;
+ goto out;
+ }
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ serial21285_stop_tx(port, 0);
+ goto out;
+ }
+
+ do {
+ *CSR_UARTDR = xmit->buf[xmit->tail];
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ } while (--count > 0 && !(*CSR_UARTFLG & 0x20));
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit))
+ serial21285_stop_tx(port, 0);
+
+ out:
+ return IRQ_HANDLED;
+}
+
+static unsigned int serial21285_tx_empty(struct uart_port *port)
+{
+ return (*CSR_UARTFLG & 8) ? 0 : TIOCSER_TEMT;
+}
+
+/* no modem control lines */
+static unsigned int serial21285_get_mctrl(struct uart_port *port)
+{
+ return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+}
+
+static void serial21285_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+static void serial21285_break_ctl(struct uart_port *port, int break_state)
+{
+ unsigned long flags;
+ unsigned int h_lcr;
+
+ spin_lock_irqsave(&port->lock, flags);
+ h_lcr = *CSR_H_UBRLCR;
+ if (break_state)
+ h_lcr |= H_UBRLCR_BREAK;
+ else
+ h_lcr &= ~H_UBRLCR_BREAK;
+ *CSR_H_UBRLCR = h_lcr;
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int serial21285_startup(struct uart_port *port)
+{
+ int ret;
+
+ tx_enabled(port) = 1;
+ rx_enabled(port) = 1;
+
+ ret = request_irq(IRQ_CONRX, serial21285_rx_chars, 0,
+ serial21285_name, port);
+ if (ret == 0) {
+ ret = request_irq(IRQ_CONTX, serial21285_tx_chars, 0,
+ serial21285_name, port);
+ if (ret)
+ free_irq(IRQ_CONRX, port);
+ }
+
+ return ret;
+}
+
+static void serial21285_shutdown(struct uart_port *port)
+{
+ free_irq(IRQ_CONTX, port);
+ free_irq(IRQ_CONRX, port);
+}
+
+static void
+serial21285_set_termios(struct uart_port *port, struct termios *termios,
+ struct termios *old)
+{
+ unsigned long flags;
+ unsigned int baud, quot, h_lcr;
+
+ /*
+ * We don't support modem control lines.
+ */
+ termios->c_cflag &= ~(HUPCL | CRTSCTS | CMSPAR);
+ termios->c_cflag |= CLOCAL;
+
+ /*
+ * We don't support BREAK character recognition.
+ */
+ termios->c_iflag &= ~(IGNBRK | BRKINT);
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ quot = uart_get_divisor(port, baud);
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ h_lcr = 0x00;
+ break;
+ case CS6:
+ h_lcr = 0x20;
+ break;
+ case CS7:
+ h_lcr = 0x40;
+ break;
+ default: /* CS8 */
+ h_lcr = 0x60;
+ break;
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ h_lcr |= H_UBRLCR_STOPB;
+ if (termios->c_cflag & PARENB) {
+ h_lcr |= H_UBRLCR_PARENB;
+ if (!(termios->c_cflag & PARODD))
+ h_lcr |= H_UBRLCR_PAREVN;
+ }
+
+ if (port->fifosize)
+ h_lcr |= H_UBRLCR_FIFO;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ /*
+ * Which character status flags are we interested in?
+ */
+ port->read_status_mask = RXSTAT_OVERRUN;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY;
+
+ /*
+ * Which character status flags should we ignore?
+ */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= RXSTAT_FRAME | RXSTAT_PARITY;
+ if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= RXSTAT_OVERRUN;
+
+ /*
+ * Ignore all characters if CREAD is not set.
+ */
+ if ((termios->c_cflag & CREAD) == 0)
+ port->ignore_status_mask |= RXSTAT_DUMMY_READ;
+
+ quot -= 1;
+
+ *CSR_UARTCON = 0;
+ *CSR_L_UBRLCR = quot & 0xff;
+ *CSR_M_UBRLCR = (quot >> 8) & 0x0f;
+ *CSR_H_UBRLCR = h_lcr;
+ *CSR_UARTCON = 1;
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *serial21285_type(struct uart_port *port)
+{
+ return port->type == PORT_21285 ? "DC21285" : NULL;
+}
+
+static void serial21285_release_port(struct uart_port *port)
+{
+ release_mem_region(port->mapbase, 32);
+}
+
+static int serial21285_request_port(struct uart_port *port)
+{
+ return request_mem_region(port->mapbase, 32, serial21285_name)
+ != NULL ? 0 : -EBUSY;
+}
+
+static void serial21285_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE && serial21285_request_port(port) == 0)
+ port->type = PORT_21285;
+}
+
+/*
+ * verify the new serial_struct (for TIOCSSERIAL).
+ */
+static int serial21285_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ int ret = 0;
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_21285)
+ ret = -EINVAL;
+ if (ser->irq != NO_IRQ)
+ ret = -EINVAL;
+ if (ser->baud_base != port->uartclk / 16)
+ ret = -EINVAL;
+ return ret;
+}
+
+static struct uart_ops serial21285_ops = {
+ .tx_empty = serial21285_tx_empty,
+ .get_mctrl = serial21285_get_mctrl,
+ .set_mctrl = serial21285_set_mctrl,
+ .stop_tx = serial21285_stop_tx,
+ .start_tx = serial21285_start_tx,
+ .stop_rx = serial21285_stop_rx,
+ .enable_ms = serial21285_enable_ms,
+ .break_ctl = serial21285_break_ctl,
+ .startup = serial21285_startup,
+ .shutdown = serial21285_shutdown,
+ .set_termios = serial21285_set_termios,
+ .type = serial21285_type,
+ .release_port = serial21285_release_port,
+ .request_port = serial21285_request_port,
+ .config_port = serial21285_config_port,
+ .verify_port = serial21285_verify_port,
+};
+
+static struct uart_port serial21285_port = {
+ .mapbase = 0x42000160,
+ .iotype = SERIAL_IO_MEM,
+ .irq = NO_IRQ,
+ .fifosize = 16,
+ .ops = &serial21285_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+};
+
+static void serial21285_setup_ports(void)
+{
+ serial21285_port.uartclk = mem_fclk_21285 / 4;
+}
+
+#ifdef CONFIG_SERIAL_21285_CONSOLE
+
+static void
+serial21285_console_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ int i;
+
+ for (i = 0; i < count; i++) {
+ while (*CSR_UARTFLG & 0x20)
+ barrier();
+ *CSR_UARTDR = s[i];
+ if (s[i] == '\n') {
+ while (*CSR_UARTFLG & 0x20)
+ barrier();
+ *CSR_UARTDR = '\r';
+ }
+ }
+}
+
+static void __init
+serial21285_get_options(struct uart_port *port, int *baud,
+ int *parity, int *bits)
+{
+ if (*CSR_UARTCON == 1) {
+ unsigned int tmp;
+
+ tmp = *CSR_H_UBRLCR;
+ switch (tmp & 0x60) {
+ case 0x00:
+ *bits = 5;
+ break;
+ case 0x20:
+ *bits = 6;
+ break;
+ case 0x40:
+ *bits = 7;
+ break;
+ default:
+ case 0x60:
+ *bits = 8;
+ break;
+ }
+
+ if (tmp & H_UBRLCR_PARENB) {
+ *parity = 'o';
+ if (tmp & H_UBRLCR_PAREVN)
+ *parity = 'e';
+ }
+
+ tmp = *CSR_L_UBRLCR | (*CSR_M_UBRLCR << 8);
+
+ *baud = port->uartclk / (16 * (tmp + 1));
+ }
+}
+
+static int __init serial21285_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port = &serial21285_port;
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (machine_is_personal_server())
+ baud = 57600;
+
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ else
+ serial21285_get_options(port, &baud, &parity, &bits);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+extern struct uart_driver serial21285_reg;
+
+static struct console serial21285_console =
+{
+ .name = SERIAL_21285_NAME,
+ .write = serial21285_console_write,
+ .device = uart_console_device,
+ .setup = serial21285_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &serial21285_reg,
+};
+
+static int __init rs285_console_init(void)
+{
+ serial21285_setup_ports();
+ register_console(&serial21285_console);
+ return 0;
+}
+console_initcall(rs285_console_init);
+
+#define SERIAL_21285_CONSOLE &serial21285_console
+#else
+#define SERIAL_21285_CONSOLE NULL
+#endif
+
+static struct uart_driver serial21285_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "ttyFB",
+ .dev_name = "ttyFB",
+ .devfs_name = "ttyFB",
+ .major = SERIAL_21285_MAJOR,
+ .minor = SERIAL_21285_MINOR,
+ .nr = 1,
+ .cons = SERIAL_21285_CONSOLE,
+};
+
+static int __init serial21285_init(void)
+{
+ int ret;
+
+ printk(KERN_INFO "Serial: 21285 driver $Revision: 1.37 $\n");
+
+ serial21285_setup_ports();
+
+ ret = uart_register_driver(&serial21285_reg);
+ if (ret == 0)
+ uart_add_one_port(&serial21285_reg, &serial21285_port);
+
+ return ret;
+}
+
+static void __exit serial21285_exit(void)
+{
+ uart_remove_one_port(&serial21285_reg, &serial21285_port);
+ uart_unregister_driver(&serial21285_reg);
+}
+
+module_init(serial21285_init);
+module_exit(serial21285_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Intel Footbridge (21285) serial driver $Revision: 1.37 $");
+MODULE_ALIAS_CHARDEV(SERIAL_21285_MAJOR, SERIAL_21285_MINOR);
diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c
new file mode 100644
index 00000000000..db92a0ceda7
--- /dev/null
+++ b/drivers/serial/68328serial.c
@@ -0,0 +1,1614 @@
+/* 68328serial.c: Serial port driver for 68328 microcontroller
+ *
+ * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu>
+ * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>
+ * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org>
+ * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>
+ * Copyright (C) 2002-2003 David McCullough <davidm@snapgear.com>
+ * Copyright (C) 2002 Greg Ungerer <gerg@snapgear.com>
+ *
+ * VZ Support/Fixes Evan Stawnyczy <e@lineo.ca>
+ * Multiple UART support Daniel Potts <danielp@cse.unsw.edu.au>
+ * Power management support Daniel Potts <danielp@cse.unsw.edu.au>
+ * VZ Second Serial Port enable Phil Wilshire
+ * 2.4/2.5 port David McCullough
+ */
+
+#include <asm/dbg.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/config.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+#include <linux/kernel.h>
+#include <linux/console.h>
+#include <linux/reboot.h>
+#include <linux/keyboard.h>
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/segment.h>
+#include <asm/delay.h>
+#include <asm/uaccess.h>
+
+/* (es) */
+/* note: perhaps we can murge these files, so that you can just
+ * define 1 of them, and they can sort that out for themselves
+ */
+#if defined(CONFIG_M68EZ328)
+#include <asm/MC68EZ328.h>
+#else
+#if defined(CONFIG_M68VZ328)
+#include <asm/MC68VZ328.h>
+#else
+#include <asm/MC68328.h>
+#endif /* CONFIG_M68VZ328 */
+#endif /* CONFIG_M68EZ328 */
+
+#include "68328serial.h"
+
+/* Turn off usage of real serial interrupt code, to "support" Copilot */
+#ifdef CONFIG_XCOPILOT_BUGS
+#undef USE_INTS
+#else
+#define USE_INTS
+#endif
+
+static struct m68k_serial m68k_soft[NR_PORTS];
+struct m68k_serial *IRQ_ports[NR_IRQS];
+
+static unsigned int uart_irqs[NR_PORTS] = UART_IRQ_DEFNS;
+
+/* multiple ports are contiguous in memory */
+m68328_uart *uart_addr = (m68328_uart *)USTCNT_ADDR;
+
+struct tty_struct m68k_ttys;
+struct m68k_serial *m68k_consinfo = 0;
+
+#define M68K_CLOCK (16667000) /* FIXME: 16MHz is likely wrong */
+
+#ifdef CONFIG_CONSOLE
+extern wait_queue_head_t keypress_wait;
+#endif
+
+struct tty_driver *serial_driver;
+
+/* serial subtype definitions */
+#define SERIAL_TYPE_NORMAL 1
+
+/* number of characters left in xmit buffer before we ask for more */
+#define WAKEUP_CHARS 256
+
+/* Debugging... DEBUG_INTR is bad to use when one of the zs
+ * lines is your console ;(
+ */
+#undef SERIAL_DEBUG_INTR
+#undef SERIAL_DEBUG_OPEN
+#undef SERIAL_DEBUG_FLOW
+
+#define RS_ISR_PASS_LIMIT 256
+
+#define _INLINE_ inline
+
+static void change_speed(struct m68k_serial *info);
+
+/*
+ * Setup for console. Argument comes from the boot command line.
+ */
+
+#if defined(CONFIG_M68EZ328ADS) || defined(CONFIG_ALMA_ANS) || defined(CONFIG_DRAGONIXVZ)
+#define CONSOLE_BAUD_RATE 115200
+#define DEFAULT_CBAUD B115200
+#else
+ /* (es) */
+ /* note: this is messy, but it works, again, perhaps defined somewhere else?*/
+ #ifdef CONFIG_M68VZ328
+ #define CONSOLE_BAUD_RATE 19200
+ #define DEFAULT_CBAUD B19200
+ #endif
+ /* (/es) */
+#endif
+
+#ifndef CONSOLE_BAUD_RATE
+#define CONSOLE_BAUD_RATE 9600
+#define DEFAULT_CBAUD B9600
+#endif
+
+
+static int m68328_console_initted = 0;
+static int m68328_console_baud = CONSOLE_BAUD_RATE;
+static int m68328_console_cbaud = DEFAULT_CBAUD;
+
+
+/*
+ * tmp_buf is used as a temporary buffer by serial_write. We need to
+ * lock it in case the memcpy_fromfs blocks while swapping in a page,
+ * and some other program tries to do a serial write at the same time.
+ * Since the lock will only come under contention when the system is
+ * swapping and available memory is low, it makes sense to share one
+ * buffer across all the serial ports, since it significantly saves
+ * memory if large numbers of serial ports are open.
+ */
+static unsigned char tmp_buf[SERIAL_XMIT_SIZE]; /* This is cheating */
+DECLARE_MUTEX(tmp_buf_sem);
+
+static inline int serial_paranoia_check(struct m68k_serial *info,
+ char *name, const char *routine)
+{
+#ifdef SERIAL_PARANOIA_CHECK
+ static const char *badmagic =
+ "Warning: bad magic number for serial struct %s in %s\n";
+ static const char *badinfo =
+ "Warning: null m68k_serial for %s in %s\n";
+
+ if (!info) {
+ printk(badinfo, name, routine);
+ return 1;
+ }
+ if (info->magic != SERIAL_MAGIC) {
+ printk(badmagic, name, routine);
+ return 1;
+ }
+#endif
+ return 0;
+}
+
+/*
+ * This is used to figure out the divisor speeds and the timeouts
+ */
+static int baud_table[] = {
+ 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
+ 9600, 19200, 38400, 57600, 115200, 0 };
+
+#define BAUD_TABLE_SIZE (sizeof(baud_table)/sizeof(baud_table[0]))
+
+/* Sets or clears DTR/RTS on the requested line */
+static inline void m68k_rtsdtr(struct m68k_serial *ss, int set)
+{
+ if (set) {
+ /* set the RTS/CTS line */
+ } else {
+ /* clear it */
+ }
+ return;
+}
+
+/* Utility routines */
+static inline int get_baud(struct m68k_serial *ss)
+{
+ unsigned long result = 115200;
+ unsigned short int baud = uart_addr[ss->line].ubaud;
+ if (GET_FIELD(baud, UBAUD_PRESCALER) == 0x38) result = 38400;
+ result >>= GET_FIELD(baud, UBAUD_DIVIDE);
+
+ return result;
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_stop() and rs_start()
+ *
+ * This routines are called before setting or resetting tty->stopped.
+ * They enable or disable transmitter interrupts, as necessary.
+ * ------------------------------------------------------------
+ */
+static void rs_stop(struct tty_struct *tty)
+{
+ struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
+ m68328_uart *uart = &uart_addr[info->line];
+ unsigned long flags;
+
+ if (serial_paranoia_check(info, tty->name, "rs_stop"))
+ return;
+
+ save_flags(flags); cli();
+ uart->ustcnt &= ~USTCNT_TXEN;
+ restore_flags(flags);
+}
+
+static void rs_put_char(char ch)
+{
+ int flags, loops = 0;
+
+ save_flags(flags); cli();
+
+ while (!(UTX & UTX_TX_AVAIL) && (loops < 1000)) {
+ loops++;
+ udelay(5);
+ }
+
+ UTX_TXDATA = ch;
+ udelay(5);
+ restore_flags(flags);
+}
+
+static void rs_start(struct tty_struct *tty)
+{
+ struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
+ m68328_uart *uart = &uart_addr[info->line];
+ unsigned long flags;
+
+ if (serial_paranoia_check(info, tty->name, "rs_start"))
+ return;
+
+ save_flags(flags); cli();
+ if (info->xmit_cnt && info->xmit_buf && !(uart->ustcnt & USTCNT_TXEN)) {
+#ifdef USE_INTS
+ uart->ustcnt |= USTCNT_TXEN | USTCNT_TX_INTR_MASK;
+#else
+ uart->ustcnt |= USTCNT_TXEN;
+#endif
+ }
+ restore_flags(flags);
+}
+
+/* Drop into either the boot monitor or kadb upon receiving a break
+ * from keyboard/console input.
+ */
+static void batten_down_hatches(void)
+{
+ /* Drop into the debugger */
+}
+
+static _INLINE_ void status_handle(struct m68k_serial *info, unsigned short status)
+{
+#if 0
+ if(status & DCD) {
+ if((info->tty->termios->c_cflag & CRTSCTS) &&
+ ((info->curregs[3] & AUTO_ENAB)==0)) {
+ info->curregs[3] |= AUTO_ENAB;
+ info->pendregs[3] |= AUTO_ENAB;
+ write_zsreg(info->m68k_channel, 3, info->curregs[3]);
+ }
+ } else {
+ if((info->curregs[3] & AUTO_ENAB)) {
+ info->curregs[3] &= ~AUTO_ENAB;
+ info->pendregs[3] &= ~AUTO_ENAB;
+ write_zsreg(info->m68k_channel, 3, info->curregs[3]);
+ }
+ }
+#endif
+ /* If this is console input and this is a
+ * 'break asserted' status change interrupt
+ * see if we can drop into the debugger
+ */
+ if((status & URX_BREAK) && info->break_abort)
+ batten_down_hatches();
+ return;
+}
+
+static _INLINE_ void receive_chars(struct m68k_serial *info, struct pt_regs *regs, unsigned short rx)
+{
+ struct tty_struct *tty = info->tty;
+ m68328_uart *uart = &uart_addr[info->line];
+ unsigned char ch;
+
+ /*
+ * This do { } while() loop will get ALL chars out of Rx FIFO
+ */
+#ifndef CONFIG_XCOPILOT_BUGS
+ do {
+#endif
+ ch = GET_FIELD(rx, URX_RXDATA);
+
+ if(info->is_cons) {
+ if(URX_BREAK & rx) { /* whee, break received */
+ status_handle(info, rx);
+ return;
+#ifdef CONFIG_MAGIC_SYSRQ
+ } else if (ch == 0x10) { /* ^P */
+ show_state();
+ show_free_areas();
+ show_buffers();
+/* show_net_buffers(); */
+ return;
+ } else if (ch == 0x12) { /* ^R */
+ machine_restart(NULL);
+ return;
+#endif /* CONFIG_MAGIC_SYSRQ */
+ }
+ /* It is a 'keyboard interrupt' ;-) */
+#ifdef CONFIG_CONSOLE
+ wake_up(&keypress_wait);
+#endif
+ }
+
+ if(!tty)
+ goto clear_and_exit;
+
+ /*
+ * Make sure that we do not overflow the buffer
+ */
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
+ schedule_work(&tty->flip.work);
+ return;
+ }
+
+ if(rx & URX_PARITY_ERROR) {
+ *tty->flip.flag_buf_ptr++ = TTY_PARITY;
+ status_handle(info, rx);
+ } else if(rx & URX_OVRUN) {
+ *tty->flip.flag_buf_ptr++ = TTY_OVERRUN;
+ status_handle(info, rx);
+ } else if(rx & URX_FRAME_ERROR) {
+ *tty->flip.flag_buf_ptr++ = TTY_FRAME;
+ status_handle(info, rx);
+ } else {
+ *tty->flip.flag_buf_ptr++ = 0; /* XXX */
+ }
+ *tty->flip.char_buf_ptr++ = ch;
+ tty->flip.count++;
+
+#ifndef CONFIG_XCOPILOT_BUGS
+ } while((rx = uart->urx.w) & URX_DATA_READY);
+#endif
+
+ schedule_work(&tty->flip.work);
+
+clear_and_exit:
+ return;
+}
+
+static _INLINE_ void transmit_chars(struct m68k_serial *info)
+{
+ m68328_uart *uart = &uart_addr[info->line];
+
+ if (info->x_char) {
+ /* Send next char */
+ uart->utx.b.txdata = info->x_char;
+ info->x_char = 0;
+ goto clear_and_return;
+ }
+
+ if((info->xmit_cnt <= 0) || info->tty->stopped) {
+ /* That's peculiar... TX ints off */
+ uart->ustcnt &= ~USTCNT_TX_INTR_MASK;
+ goto clear_and_return;
+ }
+
+ /* Send char */
+ uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++];
+ info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
+ info->xmit_cnt--;
+
+ if (info->xmit_cnt < WAKEUP_CHARS)
+ schedule_work(&info->tqueue);
+
+ if(info->xmit_cnt <= 0) {
+ /* All done for now... TX ints off */
+ uart->ustcnt &= ~USTCNT_TX_INTR_MASK;
+ goto clear_and_return;
+ }
+
+clear_and_return:
+ /* Clear interrupt (should be auto)*/
+ return;
+}
+
+/*
+ * This is the serial driver's generic interrupt routine
+ */
+irqreturn_t rs_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+{
+ struct m68k_serial * info;
+ m68328_uart *uart;
+ unsigned short rx;
+ unsigned short tx;
+
+ info = IRQ_ports[irq];
+ if(!info)
+ return IRQ_NONE;
+
+ uart = &uart_addr[info->line];
+ rx = uart->urx.w;
+
+#ifdef USE_INTS
+ tx = uart->utx.w;
+
+ if (rx & URX_DATA_READY) receive_chars(info, regs, rx);
+ if (tx & UTX_TX_AVAIL) transmit_chars(info);
+#else
+ receive_chars(info, regs, rx);
+#endif
+ return IRQ_HANDLED;
+}
+
+static void do_softint(void *private)
+{
+ struct m68k_serial *info = (struct m68k_serial *) private;
+ struct tty_struct *tty;
+
+ tty = info->tty;
+ if (!tty)
+ return;
+#if 0
+ if (clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) {
+ tty_wakeup(tty);
+ }
+#endif
+}
+
+/*
+ * This routine is called from the scheduler tqueue when the interrupt
+ * routine has signalled that a hangup has occurred. The path of
+ * hangup processing is:
+ *
+ * serial interrupt routine -> (scheduler tqueue) ->
+ * do_serial_hangup() -> tty->hangup() -> rs_hangup()
+ *
+ */
+static void do_serial_hangup(void *private)
+{
+ struct m68k_serial *info = (struct m68k_serial *) private;
+ struct tty_struct *tty;
+
+ tty = info->tty;
+ if (!tty)
+ return;
+
+ tty_hangup(tty);
+}
+
+
+static int startup(struct m68k_serial * info)
+{
+ m68328_uart *uart = &uart_addr[info->line];
+ unsigned long flags;
+
+ if (info->flags & S_INITIALIZED)
+ return 0;
+
+ if (!info->xmit_buf) {
+ info->xmit_buf = (unsigned char *) __get_free_page(GFP_KERNEL);
+ if (!info->xmit_buf)
+ return -ENOMEM;
+ }
+
+ save_flags(flags); cli();
+
+ /*
+ * Clear the FIFO buffers and disable them
+ * (they will be reenabled in change_speed())
+ */
+
+ uart->ustcnt = USTCNT_UEN;
+ info->xmit_fifo_size = 1;
+ uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_TXEN;
+ (void)uart->urx.w;
+
+ /*
+ * Finally, enable sequencing and interrupts
+ */
+#ifdef USE_INTS
+ uart->ustcnt = USTCNT_UEN | USTCNT_RXEN |
+ USTCNT_RX_INTR_MASK | USTCNT_TX_INTR_MASK;
+#else
+ uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_RX_INTR_MASK;
+#endif
+
+ if (info->tty)
+ clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+
+ /*
+ * and set the speed of the serial port
+ */
+
+ change_speed(info);
+
+ info->flags |= S_INITIALIZED;
+ restore_flags(flags);
+ return 0;
+}
+
+/*
+ * This routine will shutdown a serial port; interrupts are disabled, and
+ * DTR is dropped if the hangup on close termio flag is on.
+ */
+static void shutdown(struct m68k_serial * info)
+{
+ m68328_uart *uart = &uart_addr[info->line];
+ unsigned long flags;
+
+ uart->ustcnt = 0; /* All off! */
+ if (!(info->flags & S_INITIALIZED))
+ return;
+
+ save_flags(flags); cli(); /* Disable interrupts */
+
+ if (info->xmit_buf) {
+ free_page((unsigned long) info->xmit_buf);
+ info->xmit_buf = 0;
+ }
+
+ if (info->tty)
+ set_bit(TTY_IO_ERROR, &info->tty->flags);
+
+ info->flags &= ~S_INITIALIZED;
+ restore_flags(flags);
+}
+
+struct {
+ int divisor, prescale;
+}
+#ifndef CONFIG_M68VZ328
+ hw_baud_table[18] = {
+ {0,0}, /* 0 */
+ {0,0}, /* 50 */
+ {0,0}, /* 75 */
+ {0,0}, /* 110 */
+ {0,0}, /* 134 */
+ {0,0}, /* 150 */
+ {0,0}, /* 200 */
+ {7,0x26}, /* 300 */
+ {6,0x26}, /* 600 */
+ {5,0x26}, /* 1200 */
+ {0,0}, /* 1800 */
+ {4,0x26}, /* 2400 */
+ {3,0x26}, /* 4800 */
+ {2,0x26}, /* 9600 */
+ {1,0x26}, /* 19200 */
+ {0,0x26}, /* 38400 */
+ {1,0x38}, /* 57600 */
+ {0,0x38}, /* 115200 */
+};
+#else
+ hw_baud_table[18] = {
+ {0,0}, /* 0 */
+ {0,0}, /* 50 */
+ {0,0}, /* 75 */
+ {0,0}, /* 110 */
+ {0,0}, /* 134 */
+ {0,0}, /* 150 */
+ {0,0}, /* 200 */
+ {0,0}, /* 300 */
+ {7,0x26}, /* 600 */
+ {6,0x26}, /* 1200 */
+ {0,0}, /* 1800 */
+ {5,0x26}, /* 2400 */
+ {4,0x26}, /* 4800 */
+ {3,0x26}, /* 9600 */
+ {2,0x26}, /* 19200 */
+ {1,0x26}, /* 38400 */
+ {0,0x26}, /* 57600 */
+ {1,0x38}, /* 115200 */
+};
+#endif
+/* rate = 1036800 / ((65 - prescale) * (1<<divider)) */
+
+/*
+ * This routine is called to set the UART divisor registers to match
+ * the specified baud rate for a serial port.
+ */
+static void change_speed(struct m68k_serial *info)
+{
+ m68328_uart *uart = &uart_addr[info->line];
+ unsigned short port;
+ unsigned short ustcnt;
+ unsigned cflag;
+ int i;
+
+ if (!info->tty || !info->tty->termios)
+ return;
+ cflag = info->tty->termios->c_cflag;
+ if (!(port = info->port))
+ return;
+
+ ustcnt = uart->ustcnt;
+ uart->ustcnt = ustcnt & ~USTCNT_TXEN;
+
+ i = cflag & CBAUD;
+ if (i & CBAUDEX) {
+ i = (i & ~CBAUDEX) + B38400;
+ }
+
+ info->baud = baud_table[i];
+ uart->ubaud = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) |
+ PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale);
+
+ ustcnt &= ~(USTCNT_PARITYEN | USTCNT_ODD_EVEN | USTCNT_STOP | USTCNT_8_7);
+
+ if ((cflag & CSIZE) == CS8)
+ ustcnt |= USTCNT_8_7;
+
+ if (cflag & CSTOPB)
+ ustcnt |= USTCNT_STOP;
+
+ if (cflag & PARENB)
+ ustcnt |= USTCNT_PARITYEN;
+ if (cflag & PARODD)
+ ustcnt |= USTCNT_ODD_EVEN;
+
+#ifdef CONFIG_SERIAL_68328_RTS_CTS
+ if (cflag & CRTSCTS) {
+ uart->utx.w &= ~ UTX_NOCTS;
+ } else {
+ uart->utx.w |= UTX_NOCTS;
+ }
+#endif
+
+ ustcnt |= USTCNT_TXEN;
+
+ uart->ustcnt = ustcnt;
+ return;
+}
+
+/*
+ * Fair output driver allows a process to speak.
+ */
+static void rs_fair_output(void)
+{
+ int left; /* Output no more than that */
+ unsigned long flags;
+ struct m68k_serial *info = &m68k_soft[0];
+ char c;
+
+ if (info == 0) return;
+ if (info->xmit_buf == 0) return;
+
+ save_flags(flags); cli();
+ left = info->xmit_cnt;
+ while (left != 0) {
+ c = info->xmit_buf[info->xmit_tail];
+ info->xmit_tail = (info->xmit_tail+1) & (SERIAL_XMIT_SIZE-1);
+ info->xmit_cnt--;
+ restore_flags(flags);
+
+ rs_put_char(c);
+
+ save_flags(flags); cli();
+ left = min(info->xmit_cnt, left-1);
+ }
+
+ /* Last character is being transmitted now (hopefully). */
+ udelay(5);
+
+ restore_flags(flags);
+ return;
+}
+
+/*
+ * m68k_console_print is registered for printk.
+ */
+void console_print_68328(const char *p)
+{
+ char c;
+
+ while((c=*(p++)) != 0) {
+ if(c == '\n')
+ rs_put_char('\r');
+ rs_put_char(c);
+ }
+
+ /* Comment this if you want to have a strict interrupt-driven output */
+ rs_fair_output();
+
+ return;
+}
+
+static void rs_set_ldisc(struct tty_struct *tty)
+{
+ struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
+
+ if (serial_paranoia_check(info, tty->name, "rs_set_ldisc"))
+ return;
+
+ info->is_cons = (tty->termios->c_line == N_TTY);
+
+ printk("ttyS%d console mode %s\n", info->line, info->is_cons ? "on" : "off");
+}
+
+static void rs_flush_chars(struct tty_struct *tty)
+{
+ struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
+ m68328_uart *uart = &uart_addr[info->line];
+ unsigned long flags;
+
+ if (serial_paranoia_check(info, tty->name, "rs_flush_chars"))
+ return;
+#ifndef USE_INTS
+ for(;;) {
+#endif
+
+ /* Enable transmitter */
+ save_flags(flags); cli();
+
+ if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
+ !info->xmit_buf) {
+ restore_flags(flags);
+ return;
+ }
+
+#ifdef USE_INTS
+ uart->ustcnt |= USTCNT_TXEN | USTCNT_TX_INTR_MASK;
+#else
+ uart->ustcnt |= USTCNT_TXEN;
+#endif
+
+#ifdef USE_INTS
+ if (uart->utx.w & UTX_TX_AVAIL) {
+#else
+ if (1) {
+#endif
+ /* Send char */
+ uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++];
+ info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
+ info->xmit_cnt--;
+ }
+
+#ifndef USE_INTS
+ while (!(uart->utx.w & UTX_TX_AVAIL)) udelay(5);
+ }
+#endif
+ restore_flags(flags);
+}
+
+extern void console_printn(const char * b, int count);
+
+static int rs_write(struct tty_struct * tty,
+ const unsigned char *buf, int count)
+{
+ int c, total = 0;
+ struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
+ m68328_uart *uart = &uart_addr[info->line];
+ unsigned long flags;
+
+ if (serial_paranoia_check(info, tty->name, "rs_write"))
+ return 0;
+
+ if (!tty || !info->xmit_buf)
+ return 0;
+
+ save_flags(flags);
+ while (1) {
+ cli();
+ c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1,
+ SERIAL_XMIT_SIZE - info->xmit_head));
+ if (c <= 0)
+ break;
+
+ memcpy(info->xmit_buf + info->xmit_head, buf, c);
+ info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
+ info->xmit_cnt += c;
+ restore_flags(flags);
+ buf += c;
+ count -= c;
+ total += c;
+ }
+
+ if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) {
+ /* Enable transmitter */
+ cli();
+#ifndef USE_INTS
+ while(info->xmit_cnt) {
+#endif
+
+ uart->ustcnt |= USTCNT_TXEN;
+#ifdef USE_INTS
+ uart->ustcnt |= USTCNT_TX_INTR_MASK;
+#else
+ while (!(uart->utx.w & UTX_TX_AVAIL)) udelay(5);
+#endif
+ if (uart->utx.w & UTX_TX_AVAIL) {
+ uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++];
+ info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
+ info->xmit_cnt--;
+ }
+
+#ifndef USE_INTS
+ }
+#endif
+ restore_flags(flags);
+ }
+ restore_flags(flags);
+ return total;
+}
+
+static int rs_write_room(struct tty_struct *tty)
+{
+ struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
+ int ret;
+
+ if (serial_paranoia_check(info, tty->name, "rs_write_room"))
+ return 0;
+ ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
+ if (ret < 0)
+ ret = 0;
+ return ret;
+}
+
+static int rs_chars_in_buffer(struct tty_struct *tty)
+{
+ struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
+
+ if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer"))
+ return 0;
+ return info->xmit_cnt;
+}
+
+static void rs_flush_buffer(struct tty_struct *tty)
+{
+ struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
+
+ if (serial_paranoia_check(info, tty->name, "rs_flush_buffer"))
+ return;
+ cli();
+ info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+ sti();
+ tty_wakeup(tty);
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_throttle()
+ *
+ * This routine is called by the upper-layer tty layer to signal that
+ * incoming characters should be throttled.
+ * ------------------------------------------------------------
+ */
+static void rs_throttle(struct tty_struct * tty)
+{
+ struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
+
+ if (serial_paranoia_check(info, tty->name, "rs_throttle"))
+ return;
+
+ if (I_IXOFF(tty))
+ info->x_char = STOP_CHAR(tty);
+
+ /* Turn off RTS line (do this atomic) */
+}
+
+static void rs_unthrottle(struct tty_struct * tty)
+{
+ struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
+
+ if (serial_paranoia_check(info, tty->name, "rs_unthrottle"))
+ return;
+
+ if (I_IXOFF(tty)) {
+ if (info->x_char)
+ info->x_char = 0;
+ else
+ info->x_char = START_CHAR(tty);
+ }
+
+ /* Assert RTS line (do this atomic) */
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_ioctl() and friends
+ * ------------------------------------------------------------
+ */
+
+static int get_serial_info(struct m68k_serial * info,
+ struct serial_struct * retinfo)
+{
+ struct serial_struct tmp;
+
+ if (!retinfo)
+ return -EFAULT;
+ memset(&tmp, 0, sizeof(tmp));
+ tmp.type = info->type;
+ tmp.line = info->line;
+ tmp.port = info->port;
+ tmp.irq = info->irq;
+ tmp.flags = info->flags;
+ tmp.baud_base = info->baud_base;
+ tmp.close_delay = info->close_delay;
+ tmp.closing_wait = info->closing_wait;
+ tmp.custom_divisor = info->custom_divisor;
+ copy_to_user(retinfo,&tmp,sizeof(*retinfo));
+ return 0;
+}
+
+static int set_serial_info(struct m68k_serial * info,
+ struct serial_struct * new_info)
+{
+ struct serial_struct new_serial;
+ struct m68k_serial old_info;
+ int retval = 0;
+
+ if (!new_info)
+ return -EFAULT;
+ copy_from_user(&new_serial,new_info,sizeof(new_serial));
+ old_info = *info;
+
+ if (!capable(CAP_SYS_ADMIN)) {
+ if ((new_serial.baud_base != info->baud_base) ||
+ (new_serial.type != info->type) ||
+ (new_serial.close_delay != info->close_delay) ||
+ ((new_serial.flags & ~S_USR_MASK) !=
+ (info->flags & ~S_USR_MASK)))
+ return -EPERM;
+ info->flags = ((info->flags & ~S_USR_MASK) |
+ (new_serial.flags & S_USR_MASK));
+ info->custom_divisor = new_serial.custom_divisor;
+ goto check_and_exit;
+ }
+
+ if (info->count > 1)
+ return -EBUSY;
+
+ /*
+ * OK, past this point, all the error checking has been done.
+ * At this point, we start making changes.....
+ */
+
+ info->baud_base = new_serial.baud_base;
+ info->flags = ((info->flags & ~S_FLAGS) |
+ (new_serial.flags & S_FLAGS));
+ info->type = new_serial.type;
+ info->close_delay = new_serial.close_delay;
+ info->closing_wait = new_serial.closing_wait;
+
+check_and_exit:
+ retval = startup(info);
+ return retval;
+}
+
+/*
+ * get_lsr_info - get line status register info
+ *
+ * Purpose: Let user call ioctl() to get info when the UART physically
+ * is emptied. On bus types like RS485, the transmitter must
+ * release the bus after transmitting. This must be done when
+ * the transmit shift register is empty, not be done when the
+ * transmit holding register is empty. This functionality
+ * allows an RS485 driver to be written in user space.
+ */
+static int get_lsr_info(struct m68k_serial * info, unsigned int *value)
+{
+#ifdef CONFIG_SERIAL_68328_RTS_CTS
+ m68328_uart *uart = &uart_addr[info->line];
+#endif
+ unsigned char status;
+
+ cli();
+#ifdef CONFIG_SERIAL_68328_RTS_CTS
+ status = (uart->utx.w & UTX_CTS_STAT) ? 1 : 0;
+#else
+ status = 0;
+#endif
+ sti();
+ put_user(status,value);
+ return 0;
+}
+
+/*
+ * This routine sends a break character out the serial port.
+ */
+static void send_break( struct m68k_serial * info, int duration)
+{
+ m68328_uart *uart = &uart_addr[info->line];
+ unsigned long flags;
+ if (!info->port)
+ return;
+ set_current_state(TASK_INTERRUPTIBLE);
+ save_flags(flags);
+ cli();
+#ifdef USE_INTS
+ uart->utx.w |= UTX_SEND_BREAK;
+ schedule_timeout(duration);
+ uart->utx.w &= ~UTX_SEND_BREAK;
+#endif
+ restore_flags(flags);
+}
+
+static int rs_ioctl(struct tty_struct *tty, struct file * file,
+ unsigned int cmd, unsigned long arg)
+{
+ int error;
+ struct m68k_serial * info = (struct m68k_serial *)tty->driver_data;
+ int retval;
+
+ if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
+ return -ENODEV;
+
+ if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
+ (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) &&
+ (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) {
+ if (tty->flags & (1 << TTY_IO_ERROR))
+ return -EIO;
+ }
+
+ switch (cmd) {
+ case TCSBRK: /* SVID version: non-zero arg --> no break */
+ retval = tty_check_change(tty);
+ if (retval)
+ return retval;
+ tty_wait_until_sent(tty, 0);
+ if (!arg)
+ send_break(info, HZ/4); /* 1/4 second */
+ return 0;
+ case TCSBRKP: /* support for POSIX tcsendbreak() */
+ retval = tty_check_change(tty);
+ if (retval)
+ return retval;
+ tty_wait_until_sent(tty, 0);
+ send_break(info, arg ? arg*(HZ/10) : HZ/4);
+ return 0;
+ case TIOCGSOFTCAR:
+ error = put_user(C_CLOCAL(tty) ? 1 : 0,
+ (unsigned long *) arg);
+ if (error)
+ return error;
+ return 0;
+ case TIOCSSOFTCAR:
+ get_user(arg, (unsigned long *) arg);
+ tty->termios->c_cflag =
+ ((tty->termios->c_cflag & ~CLOCAL) |
+ (arg ? CLOCAL : 0));
+ return 0;
+ case TIOCGSERIAL:
+ if (access_ok(VERIFY_WRITE, (void *) arg,
+ sizeof(struct serial_struct)))
+ return get_serial_info(info,
+ (struct serial_struct *) arg);
+ return -EFAULT;
+ case TIOCSSERIAL:
+ return set_serial_info(info,
+ (struct serial_struct *) arg);
+ case TIOCSERGETLSR: /* Get line status register */
+ if (access_ok(VERIFY_WRITE, (void *) arg,
+ sizeof(unsigned int));
+ return get_lsr_info(info, (unsigned int *) arg);
+ return -EFAULT;
+ case TIOCSERGSTRUCT:
+ if (!access_ok(VERIFY_WRITE, (void *) arg,
+ sizeof(struct m68k_serial)))
+ return -EFAULT;
+ copy_to_user((struct m68k_serial *) arg,
+ info, sizeof(struct m68k_serial));
+ return 0;
+
+ default:
+ return -ENOIOCTLCMD;
+ }
+ return 0;
+}
+
+static void rs_set_termios(struct tty_struct *tty, struct termios *old_termios)
+{
+ struct m68k_serial *info = (struct m68k_serial *)tty->driver_data;
+
+ if (tty->termios->c_cflag == old_termios->c_cflag)
+ return;
+
+ change_speed(info);
+
+ if ((old_termios->c_cflag & CRTSCTS) &&
+ !(tty->termios->c_cflag & CRTSCTS)) {
+ tty->hw_stopped = 0;
+ rs_start(tty);
+ }
+
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_close()
+ *
+ * This routine is called when the serial port gets closed. First, we
+ * wait for the last remaining data to be sent. Then, we unlink its
+ * S structure from the interrupt chain if necessary, and we free
+ * that IRQ if nothing is left in the chain.
+ * ------------------------------------------------------------
+ */
+static void rs_close(struct tty_struct *tty, struct file * filp)
+{
+ struct m68k_serial * info = (struct m68k_serial *)tty->driver_data;
+ m68328_uart *uart = &uart_addr[info->line];
+ unsigned long flags;
+
+ if (!info || serial_paranoia_check(info, tty->name, "rs_close"))
+ return;
+
+ save_flags(flags); cli();
+
+ if (tty_hung_up_p(filp)) {
+ restore_flags(flags);
+ return;
+ }
+
+ if ((tty->count == 1) && (info->count != 1)) {
+ /*
+ * Uh, oh. tty->count is 1, which means that the tty
+ * structure will be freed. Info->count should always
+ * be one in these conditions. If it's greater than
+ * one, we've got real problems, since it means the
+ * serial port won't be shutdown.
+ */
+ printk("rs_close: bad serial port count; tty->count is 1, "
+ "info->count is %d\n", info->count);
+ info->count = 1;
+ }
+ if (--info->count < 0) {
+ printk("rs_close: bad serial port count for ttyS%d: %d\n",
+ info->line, info->count);
+ info->count = 0;
+ }
+ if (info->count) {
+ restore_flags(flags);
+ return;
+ }
+ info->flags |= S_CLOSING;
+ /*
+ * Now we wait for the transmit buffer to clear; and we notify
+ * the line discipline to only process XON/XOFF characters.
+ */
+ tty->closing = 1;
+ if (info->closing_wait != S_CLOSING_WAIT_NONE)
+ tty_wait_until_sent(tty, info->closing_wait);
+ /*
+ * At this point we stop accepting input. To do this, we
+ * disable the receive line status interrupts, and tell the
+ * interrupt driver to stop checking the data ready bit in the
+ * line status register.
+ */
+
+ uart->ustcnt &= ~USTCNT_RXEN;
+ uart->ustcnt &= ~(USTCNT_RXEN | USTCNT_RX_INTR_MASK);
+
+ shutdown(info);
+ if (tty->driver->flush_buffer)
+ tty->driver->flush_buffer(tty);
+
+ tty_ldisc_flush(tty);
+ tty->closing = 0;
+ info->event = 0;
+ info->tty = 0;
+#warning "This is not and has never been valid so fix it"
+#if 0
+ if (tty->ldisc.num != ldiscs[N_TTY].num) {
+ if (tty->ldisc.close)
+ (tty->ldisc.close)(tty);
+ tty->ldisc = ldiscs[N_TTY];
+ tty->termios->c_line = N_TTY;
+ if (tty->ldisc.open)
+ (tty->ldisc.open)(tty);
+ }
+#endif
+ if (info->blocked_open) {
+ if (info->close_delay) {
+ msleep_interruptible(jiffies_to_msecs(info->close_delay));
+ }
+ wake_up_interruptible(&info->open_wait);
+ }
+ info->flags &= ~(S_NORMAL_ACTIVE|S_CLOSING);
+ wake_up_interruptible(&info->close_wait);
+ restore_flags(flags);
+}
+
+/*
+ * rs_hangup() --- called by tty_hangup() when a hangup is signaled.
+ */
+void rs_hangup(struct tty_struct *tty)
+{
+ struct m68k_serial * info = (struct m68k_serial *)tty->driver_data;
+
+ if (serial_paranoia_check(info, tty->name, "rs_hangup"))
+ return;
+
+ rs_flush_buffer(tty);
+ shutdown(info);
+ info->event = 0;
+ info->count = 0;
+ info->flags &= ~S_NORMAL_ACTIVE;
+ info->tty = 0;
+ wake_up_interruptible(&info->open_wait);
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_open() and friends
+ * ------------------------------------------------------------
+ */
+static int block_til_ready(struct tty_struct *tty, struct file * filp,
+ struct m68k_serial *info)
+{
+ DECLARE_WAITQUEUE(wait, current);
+ int retval;
+ int do_clocal = 0;
+
+ /*
+ * If the device is in the middle of being closed, then block
+ * until it's done, and then try again.
+ */
+ if (info->flags & S_CLOSING) {
+ interruptible_sleep_on(&info->close_wait);
+#ifdef SERIAL_DO_RESTART
+ if (info->flags & S_HUP_NOTIFY)
+ return -EAGAIN;
+ else
+ return -ERESTARTSYS;
+#else
+ return -EAGAIN;
+#endif
+ }
+
+ /*
+ * If non-blocking mode is set, or the port is not enabled,
+ * then make the check up front and then exit.
+ */
+ if ((filp->f_flags & O_NONBLOCK) ||
+ (tty->flags & (1 << TTY_IO_ERROR))) {
+ info->flags |= S_NORMAL_ACTIVE;
+ return 0;
+ }
+
+ if (tty->termios->c_cflag & CLOCAL)
+ do_clocal = 1;
+
+ /*
+ * Block waiting for the carrier detect and the line to become
+ * free (i.e., not in use by the callout). While we are in
+ * this loop, info->count is dropped by one, so that
+ * rs_close() knows when to free things. We restore it upon
+ * exit, either normal or abnormal.
+ */
+ retval = 0;
+ add_wait_queue(&info->open_wait, &wait);
+
+ info->count--;
+ info->blocked_open++;
+ while (1) {
+ cli();
+ m68k_rtsdtr(info, 1);
+ sti();
+ current->state = TASK_INTERRUPTIBLE;
+ if (tty_hung_up_p(filp) ||
+ !(info->flags & S_INITIALIZED)) {
+#ifdef SERIAL_DO_RESTART
+ if (info->flags & S_HUP_NOTIFY)
+ retval = -EAGAIN;
+ else
+ retval = -ERESTARTSYS;
+#else
+ retval = -EAGAIN;
+#endif
+ break;
+ }
+ if (!(info->flags & S_CLOSING) && do_clocal)
+ break;
+ if (signal_pending(current)) {
+ retval = -ERESTARTSYS;
+ break;
+ }
+ schedule();
+ }
+ current->state = TASK_RUNNING;
+ remove_wait_queue(&info->open_wait, &wait);
+ if (!tty_hung_up_p(filp))
+ info->count++;
+ info->blocked_open--;
+
+ if (retval)
+ return retval;
+ info->flags |= S_NORMAL_ACTIVE;
+ return 0;
+}
+
+/*
+ * This routine is called whenever a serial port is opened. It
+ * enables interrupts for a serial port, linking in its S structure into
+ * the IRQ chain. It also performs the serial-specific
+ * initialization for the tty structure.
+ */
+int rs_open(struct tty_struct *tty, struct file * filp)
+{
+ struct m68k_serial *info;
+ int retval, line;
+
+ line = tty->index;
+
+ if (line >= NR_PORTS || line < 0) /* we have exactly one */
+ return -ENODEV;
+
+ info = &m68k_soft[line];
+
+ if (serial_paranoia_check(info, tty->name, "rs_open"))
+ return -ENODEV;
+
+ info->count++;
+ tty->driver_data = info;
+ info->tty = tty;
+
+ /*
+ * Start up serial port
+ */
+ retval = startup(info);
+ if (retval)
+ return retval;
+
+ return block_til_ready(tty, filp, info);
+}
+
+/* Finally, routines used to initialize the serial driver. */
+
+static void show_serial_version(void)
+{
+ printk("MC68328 serial driver version 1.00\n");
+}
+
+#ifdef CONFIG_PM
+/* Serial Power management
+ * The console (currently fixed at line 0) is a special case for power
+ * management because the kernel is so chatty. The console will be
+ * explicitly disabled my our power manager as the last minute, so we won't
+ * mess with it here.
+ */
+static struct pm_dev *serial_pm[NR_PORTS];
+
+static int serial_pm_callback(struct pm_dev *dev, pm_request_t request, void *data)
+{
+ struct m68k_serial *info = (struct m68k_serial *)dev->data;
+
+ if(info == NULL)
+ return -1;
+
+ /* special case for line 0 - pm restores it */
+ if(info->line == 0)
+ return 0;
+
+ switch (request) {
+ case PM_SUSPEND:
+ shutdown(info);
+ break;
+
+ case PM_RESUME:
+ startup(info);
+ break;
+ }
+ return 0;
+}
+
+void shutdown_console(void)
+{
+ struct m68k_serial *info = &m68k_soft[0];
+
+ /* HACK: wait a bit for any pending printk's to be dumped */
+ {
+ int i = 10000;
+ while(i--);
+ }
+
+ shutdown(info);
+}
+
+void startup_console(void)
+{
+ struct m68k_serial *info = &m68k_soft[0];
+ startup(info);
+}
+#endif
+
+
+static struct tty_operations rs_ops = {
+ .open = rs_open,
+ .close = rs_close,
+ .write = rs_write,
+ .flush_chars = rs_flush_chars,
+ .write_room = rs_write_room,
+ .chars_in_buffer = rs_chars_in_buffer,
+ .flush_buffer = rs_flush_buffer,
+ .ioctl = rs_ioctl,
+ .throttle = rs_throttle,
+ .unthrottle = rs_unthrottle,
+ .set_termios = rs_set_termios,
+ .stop = rs_stop,
+ .start = rs_start,
+ .hangup = rs_hangup,
+ .set_ldisc = rs_set_ldisc,
+};
+
+/* rs_init inits the driver */
+static int __init
+rs68328_init(void)
+{
+ int flags, i;
+ struct m68k_serial *info;
+
+ serial_driver = alloc_tty_driver(NR_PORTS);
+ if (!serial_driver)
+ return -ENOMEM;
+
+ show_serial_version();
+
+ /* Initialize the tty_driver structure */
+ /* SPARC: Not all of this is exactly right for us. */
+
+ serial_driver->name = "ttyS";
+ serial_driver->major = TTY_MAJOR;
+ serial_driver->minor_start = 64;
+ serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
+ serial_driver->subtype = SERIAL_TYPE_NORMAL;
+ serial_driver->init_termios = tty_std_termios;
+ serial_driver->init_termios.c_cflag =
+ m68328_console_cbaud | CS8 | CREAD | HUPCL | CLOCAL;
+ serial_driver->flags = TTY_DRIVER_REAL_RAW;
+ tty_set_operations(serial_driver, &rs_ops);
+
+ if (tty_register_driver(serial_driver)) {
+ put_tty_driver(serial_driver);
+ printk(KERN_ERR "Couldn't register serial driver\n");
+ return -ENOMEM;
+ }
+
+ save_flags(flags); cli();
+
+ for(i=0;i<NR_PORTS;i++) {
+
+ info = &m68k_soft[i];
+ info->magic = SERIAL_MAGIC;
+ info->port = (int) &uart_addr[i];
+ info->tty = 0;
+ info->irq = uart_irqs[i];
+ info->custom_divisor = 16;
+ info->close_delay = 50;
+ info->closing_wait = 3000;
+ info->x_char = 0;
+ info->event = 0;
+ info->count = 0;
+ info->blocked_open = 0;
+ INIT_WORK(&info->tqueue, do_softint, info);
+ INIT_WORK(&info->tqueue_hangup, do_serial_hangup, info);
+ init_waitqueue_head(&info->open_wait);
+ init_waitqueue_head(&info->close_wait);
+ info->line = i;
+ info->is_cons = 1; /* Means shortcuts work */
+
+ printk("%s%d at 0x%08x (irq = %d)", serial_driver->name, info->line,
+ info->port, info->irq);
+ printk(" is a builtin MC68328 UART\n");
+
+ IRQ_ports[info->irq] = info; /* waste of space */
+
+#ifdef CONFIG_M68VZ328
+ if (i > 0 )
+ PJSEL &= 0xCF; /* PSW enable second port output */
+#endif
+
+ if (request_irq(uart_irqs[i],
+ rs_interrupt,
+ IRQ_FLG_STD,
+ "M68328_UART", NULL))
+ panic("Unable to attach 68328 serial interrupt\n");
+#ifdef CONFIG_PM
+ serial_pm[i] = pm_register(PM_SYS_DEV, PM_SYS_COM, serial_pm_callback);
+ if (serial_pm[i])
+ serial_pm[i]->data = info;
+#endif
+ }
+ restore_flags(flags);
+ return 0;
+}
+
+
+
+/*
+ * register_serial and unregister_serial allows for serial ports to be
+ * configured at run-time, to support PCMCIA modems.
+ */
+/* SPARC: Unused at this time, just here to make things link. */
+int register_serial(struct serial_struct *req)
+{
+ return -1;
+}
+
+void unregister_serial(int line)
+{
+ return;
+}
+
+module_init(rs68328_init);
+
+
+
+static void m68328_set_baud(void)
+{
+ unsigned short ustcnt;
+ int i;
+
+ ustcnt = USTCNT;
+ USTCNT = ustcnt & ~USTCNT_TXEN;
+
+again:
+ for (i = 0; i < sizeof(baud_table) / sizeof(baud_table[0]); i++)
+ if (baud_table[i] == m68328_console_baud)
+ break;
+ if (i >= sizeof(baud_table) / sizeof(baud_table[0])) {
+ m68328_console_baud = 9600;
+ goto again;
+ }
+
+ UBAUD = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) |
+ PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale);
+ ustcnt &= ~(USTCNT_PARITYEN | USTCNT_ODD_EVEN | USTCNT_STOP | USTCNT_8_7);
+ ustcnt |= USTCNT_8_7;
+ ustcnt |= USTCNT_TXEN;
+ USTCNT = ustcnt;
+ m68328_console_initted = 1;
+ return;
+}
+
+
+int m68328_console_setup(struct console *cp, char *arg)
+{
+ int i, n = CONSOLE_BAUD_RATE;
+
+ if (!cp)
+ return(-1);
+
+ if (arg)
+ n = simple_strtoul(arg,NULL,0);
+
+ for (i = 0; i < BAUD_TABLE_SIZE; i++)
+ if (baud_table[i] == n)
+ break;
+ if (i < BAUD_TABLE_SIZE) {
+ m68328_console_baud = n;
+ m68328_console_cbaud = 0;
+ if (i > 15) {
+ m68328_console_cbaud |= CBAUDEX;
+ i -= 15;
+ }
+ m68328_console_cbaud |= i;
+ }
+
+ m68328_set_baud(); /* make sure baud rate changes */
+ return(0);
+}
+
+
+static struct tty_driver *m68328_console_device(struct console *c, int *index)
+{
+ *index = c->index;
+ return serial_driver;
+}
+
+
+void m68328_console_write (struct console *co, const char *str,
+ unsigned int count)
+{
+ if (!m68328_console_initted)
+ m68328_set_baud();
+ while (count--) {
+ if (*str == '\n')
+ rs_put_char('\r');
+ rs_put_char( *str++ );
+ }
+}
+
+
+static struct console m68328_driver = {
+ .name = "ttyS",
+ .write = m68328_console_write,
+ .device = m68328_console_device,
+ .setup = m68328_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+
+
+static int __init m68328_console_init(void)
+{
+ register_console(&m68328_driver);
+ return 0;
+}
+
+console_initcall(m68328_console_init);
diff --git a/drivers/serial/68328serial.h b/drivers/serial/68328serial.h
new file mode 100644
index 00000000000..978f8a609f3
--- /dev/null
+++ b/drivers/serial/68328serial.h
@@ -0,0 +1,194 @@
+/* 68328serial.h: Definitions for the mc68328 serial driver.
+ *
+ * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu>
+ * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>
+ * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org>
+ * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>
+ *
+ * VZ Support/Fixes Evan Stawnyczy <e@lineo.ca>
+ */
+
+#ifndef _MC683XX_SERIAL_H
+#define _MC683XX_SERIAL_H
+
+#include <linux/config.h>
+
+struct serial_struct {
+ int type;
+ int line;
+ int port;
+ int irq;
+ int flags;
+ int xmit_fifo_size;
+ int custom_divisor;
+ int baud_base;
+ unsigned short close_delay;
+ char reserved_char[2];
+ int hub6; /* FIXME: We don't have AT&T Hub6 boards! */
+ unsigned short closing_wait; /* time to wait before closing */
+ unsigned short closing_wait2; /* no longer used... */
+ int reserved[4];
+};
+
+/*
+ * For the close wait times, 0 means wait forever for serial port to
+ * flush its output. 65535 means don't wait at all.
+ */
+#define S_CLOSING_WAIT_INF 0
+#define S_CLOSING_WAIT_NONE 65535
+
+/*
+ * Definitions for S_struct (and serial_struct) flags field
+ */
+#define S_HUP_NOTIFY 0x0001 /* Notify getty on hangups and closes
+ on the callout port */
+#define S_FOURPORT 0x0002 /* Set OU1, OUT2 per AST Fourport settings */
+#define S_SAK 0x0004 /* Secure Attention Key (Orange book) */
+#define S_SPLIT_TERMIOS 0x0008 /* Separate termios for dialin/callout */
+
+#define S_SPD_MASK 0x0030
+#define S_SPD_HI 0x0010 /* Use 56000 instead of 38400 bps */
+
+#define S_SPD_VHI 0x0020 /* Use 115200 instead of 38400 bps */
+#define S_SPD_CUST 0x0030 /* Use user-specified divisor */
+
+#define S_SKIP_TEST 0x0040 /* Skip UART test during autoconfiguration */
+#define S_AUTO_IRQ 0x0080 /* Do automatic IRQ during autoconfiguration */
+#define S_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */
+#define S_PGRP_LOCKOUT 0x0200 /* Lock out cua opens based on pgrp */
+#define S_CALLOUT_NOHUP 0x0400 /* Don't do hangups for cua device */
+
+#define S_FLAGS 0x0FFF /* Possible legal S flags */
+#define S_USR_MASK 0x0430 /* Legal flags that non-privileged
+ * users can set or reset */
+
+/* Internal flags used only by kernel/chr_drv/serial.c */
+#define S_INITIALIZED 0x80000000 /* Serial port was initialized */
+#define S_CALLOUT_ACTIVE 0x40000000 /* Call out device is active */
+#define S_NORMAL_ACTIVE 0x20000000 /* Normal device is active */
+#define S_BOOT_AUTOCONF 0x10000000 /* Autoconfigure port on bootup */
+#define S_CLOSING 0x08000000 /* Serial port is closing */
+#define S_CTS_FLOW 0x04000000 /* Do CTS flow control */
+#define S_CHECK_CD 0x02000000 /* i.e., CLOCAL */
+
+/* Software state per channel */
+
+#ifdef __KERNEL__
+
+/*
+ * I believe this is the optimal setting that reduces the number of interrupts.
+ * At high speeds the output might become a little "bursted" (use USTCNT_TXHE
+ * if that bothers you), but in most cases it will not, since we try to
+ * transmit characters every time rs_interrupt is called. Thus, quite often
+ * you'll see that a receive interrupt occures before the transmit one.
+ * -- Vladimir Gurevich
+ */
+#define USTCNT_TX_INTR_MASK (USTCNT_TXEE)
+
+/*
+ * 68328 and 68EZ328 UARTS are a little bit different. EZ328 has special
+ * "Old data interrupt" which occures whenever the data stay in the FIFO
+ * longer than 30 bits time. This allows us to use FIFO without compromising
+ * latency. '328 does not have this feature and without the real 328-based
+ * board I would assume that RXRE is the safest setting.
+ *
+ * For EZ328 I use RXHE (Half empty) interrupt to reduce the number of
+ * interrupts. RXFE (receive queue full) causes the system to lose data
+ * at least at 115200 baud
+ *
+ * If your board is busy doing other stuff, you might consider to use
+ * RXRE (data ready intrrupt) instead.
+ *
+ * The other option is to make these INTR masks run-time configurable, so
+ * that people can dynamically adapt them according to the current usage.
+ * -- Vladimir Gurevich
+ */
+
+/* (es) */
+#if defined(CONFIG_M68EZ328) || defined(CONFIG_M68VZ328)
+#define USTCNT_RX_INTR_MASK (USTCNT_RXHE | USTCNT_ODEN)
+#elif defined(CONFIG_M68328)
+#define USTCNT_RX_INTR_MASK (USTCNT_RXRE)
+#else
+#error Please, define the Rx interrupt events for your CPU
+#endif
+/* (/es) */
+
+/*
+ * This is our internal structure for each serial port's state.
+ *
+ * Many fields are paralleled by the structure used by the serial_struct
+ * structure.
+ *
+ * For definitions of the flags field, see tty.h
+ */
+
+struct m68k_serial {
+ char soft_carrier; /* Use soft carrier on this channel */
+ char break_abort; /* Is serial console in, so process brk/abrt */
+ char is_cons; /* Is this our console. */
+
+ /* We need to know the current clock divisor
+ * to read the bps rate the chip has currently
+ * loaded.
+ */
+ unsigned char clk_divisor; /* May be 1, 16, 32, or 64 */
+ int baud;
+ int magic;
+ int baud_base;
+ int port;
+ int irq;
+ int flags; /* defined in tty.h */
+ int type; /* UART type */
+ struct tty_struct *tty;
+ int read_status_mask;
+ int ignore_status_mask;
+ int timeout;
+ int xmit_fifo_size;
+ int custom_divisor;
+ int x_char; /* xon/xoff character */
+ int close_delay;
+ unsigned short closing_wait;
+ unsigned short closing_wait2;
+ unsigned long event;
+ unsigned long last_active;
+ int line;
+ int count; /* # of fd on device */
+ int blocked_open; /* # of blocked opens */
+ unsigned char *xmit_buf;
+ int xmit_head;
+ int xmit_tail;
+ int xmit_cnt;
+ struct work_struct tqueue;
+ struct work_struct tqueue_hangup;
+ wait_queue_head_t open_wait;
+ wait_queue_head_t close_wait;
+};
+
+
+#define SERIAL_MAGIC 0x5301
+
+/*
+ * The size of the serial xmit buffer is 1 page, or 4096 bytes
+ */
+#define SERIAL_XMIT_SIZE 4096
+
+/*
+ * Events are used to schedule things to happen at timer-interrupt
+ * time, instead of at rs interrupt time.
+ */
+#define RS_EVENT_WRITE_WAKEUP 0
+
+/*
+ * Define the number of ports supported and their irqs.
+ */
+#ifndef CONFIG_68328_SERIAL_UART2
+#define NR_PORTS 1
+#define UART_IRQ_DEFNS {UART_IRQ_NUM}
+#else
+#define NR_PORTS 2
+#define UART_IRQ_DEFNS {UART1_IRQ_NUM, UART2_IRQ_NUM}
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* !(_MC683XX_SERIAL_H) */
diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c
new file mode 100644
index 00000000000..f148022b6b4
--- /dev/null
+++ b/drivers/serial/68360serial.c
@@ -0,0 +1,3027 @@
+/*
+ * UART driver for 68360 CPM SCC or SMC
+ * Copyright (c) 2000 D. Jeff Dionne <jeff@uclinux.org>,
+ * Copyright (c) 2000 Michael Leslie <mleslie@lineo.ca>
+ * Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
+ *
+ * I used the serial.c driver as the framework for this driver.
+ * Give credit to those guys.
+ * The original code was written for the MBX860 board. I tried to make
+ * it generic, but there may be some assumptions in the structures that
+ * have to be fixed later.
+ * To save porting time, I did not bother to change any object names
+ * that are not accessed outside of this file.
+ * It still needs lots of work........When it was easy, I included code
+ * to support the SCCs, but this has never been tested, nor is it complete.
+ * Only the SCCs support modem control, so that is not complete either.
+ *
+ * This module exports the following rs232 io functions:
+ *
+ * int rs_360_init(void);
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/serialP.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <asm/irq.h>
+#include <asm/m68360.h>
+#include <asm/commproc.h>
+
+
+#ifdef CONFIG_KGDB
+extern void breakpoint(void);
+extern void set_debug_traps(void);
+extern int kgdb_output_string (const char* s, unsigned int count);
+#endif
+
+
+/* #ifdef CONFIG_SERIAL_CONSOLE */ /* This seems to be a post 2.0 thing - mles */
+#include <linux/console.h>
+
+/* this defines the index into rs_table for the port to use
+ */
+#ifndef CONFIG_SERIAL_CONSOLE_PORT
+#define CONFIG_SERIAL_CONSOLE_PORT 1 /* ie SMC2 - note USE_SMC2 must be defined */
+#endif
+/* #endif */
+
+#if 0
+/* SCC2 for console
+ */
+#undef CONFIG_SERIAL_CONSOLE_PORT
+#define CONFIG_SERIAL_CONSOLE_PORT 2
+#endif
+
+
+#define TX_WAKEUP ASYNC_SHARE_IRQ
+
+static char *serial_name = "CPM UART driver";
+static char *serial_version = "0.03";
+
+static struct tty_driver *serial_driver;
+int serial_console_setup(struct console *co, char *options);
+
+/*
+ * Serial driver configuration section. Here are the various options:
+ */
+#define SERIAL_PARANOIA_CHECK
+#define CONFIG_SERIAL_NOPAUSE_IO
+#define SERIAL_DO_RESTART
+
+/* Set of debugging defines */
+
+#undef SERIAL_DEBUG_INTR
+#undef SERIAL_DEBUG_OPEN
+#undef SERIAL_DEBUG_FLOW
+#undef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
+
+#define _INLINE_ inline
+
+#define DBG_CNT(s)
+
+/* We overload some of the items in the data structure to meet our
+ * needs. For example, the port address is the CPM parameter ram
+ * offset for the SCC or SMC. The maximum number of ports is 4 SCCs and
+ * 2 SMCs. The "hub6" field is used to indicate the channel number, with
+ * a flag indicating SCC or SMC, and the number is used as an index into
+ * the CPM parameter area for this device.
+ * The "type" field is currently set to 0, for PORT_UNKNOWN. It is
+ * not currently used. I should probably use it to indicate the port
+ * type of SMC or SCC.
+ * The SMCs do not support any modem control signals.
+ */
+#define smc_scc_num hub6
+#define NUM_IS_SCC ((int)0x00010000)
+#define PORT_NUM(P) ((P) & 0x0000ffff)
+
+
+#if defined (CONFIG_UCQUICC)
+
+volatile extern void *_periph_base;
+/* sipex transceiver
+ * mode bits for are on pins
+ *
+ * SCC2 d16..19
+ * SCC3 d20..23
+ * SCC4 d24..27
+ */
+#define SIPEX_MODE(n,m) ((m & 0x0f)<<(16+4*(n-1)))
+
+static uint sipex_mode_bits = 0x00000000;
+
+#endif
+
+/* There is no `serial_state' defined back here in 2.0.
+ * Try to get by with serial_struct
+ */
+/* #define serial_state serial_struct */
+
+/* 2.4 -> 2.0 portability problem: async_icount in 2.4 has a few
+ * extras: */
+
+#if 0
+struct async_icount_24 {
+ __u32 cts, dsr, rng, dcd, tx, rx;
+ __u32 frame, parity, overrun, brk;
+ __u32 buf_overrun;
+} icount;
+#endif
+
+#if 0
+
+struct serial_state {
+ int magic;
+ int baud_base;
+ unsigned long port;
+ int irq;
+ int flags;
+ int hub6;
+ int type;
+ int line;
+ int revision; /* Chip revision (950) */
+ int xmit_fifo_size;
+ int custom_divisor;
+ int count;
+ u8 *iomem_base;
+ u16 iomem_reg_shift;
+ unsigned short close_delay;
+ unsigned short closing_wait; /* time to wait before closing */
+ struct async_icount_24 icount;
+ int io_type;
+ struct async_struct *info;
+};
+#endif
+
+#define SSTATE_MAGIC 0x5302
+
+
+
+/* SMC2 is sometimes used for low performance TDM interfaces. Define
+ * this as 1 if you want SMC2 as a serial port UART managed by this driver.
+ * Define this as 0 if you wish to use SMC2 for something else.
+ */
+#define USE_SMC2 1
+
+#if 0
+/* Define SCC to ttySx mapping. */
+#define SCC_NUM_BASE (USE_SMC2 + 1) /* SCC base tty "number" */
+
+/* Define which SCC is the first one to use for a serial port. These
+ * are 0-based numbers, i.e. this assumes the first SCC (SCC1) is used
+ * for Ethernet, and the first available SCC for serial UART is SCC2.
+ * NOTE: IF YOU CHANGE THIS, you have to change the PROFF_xxx and
+ * interrupt vectors in the table below to match.
+ */
+#define SCC_IDX_BASE 1 /* table index */
+#endif
+
+
+/* Processors other than the 860 only get SMCs configured by default.
+ * Either they don't have SCCs or they are allocated somewhere else.
+ * Of course, there are now 860s without some SCCs, so we will need to
+ * address that someday.
+ * The Embedded Planet Multimedia I/O cards use TDM interfaces to the
+ * stereo codec parts, and we use SMC2 to help support that.
+ */
+static struct serial_state rs_table[] = {
+/* type line PORT IRQ FLAGS smc_scc_num (F.K.A. hub6) */
+ { 0, 0, PRSLOT_SMC1, CPMVEC_SMC1, 0, 0 } /* SMC1 ttyS0 */
+#if USE_SMC2
+ ,{ 0, 0, PRSLOT_SMC2, CPMVEC_SMC2, 0, 1 } /* SMC2 ttyS1 */
+#endif
+
+#if defined(CONFIG_SERIAL_68360_SCC)
+ ,{ 0, 0, PRSLOT_SCC2, CPMVEC_SCC2, 0, (NUM_IS_SCC | 1) } /* SCC2 ttyS2 */
+ ,{ 0, 0, PRSLOT_SCC3, CPMVEC_SCC3, 0, (NUM_IS_SCC | 2) } /* SCC3 ttyS3 */
+ ,{ 0, 0, PRSLOT_SCC4, CPMVEC_SCC4, 0, (NUM_IS_SCC | 3) } /* SCC4 ttyS4 */
+#endif
+};
+
+#define NR_PORTS (sizeof(rs_table)/sizeof(struct serial_state))
+
+/* The number of buffer descriptors and their sizes.
+ */
+#define RX_NUM_FIFO 4
+#define RX_BUF_SIZE 32
+#define TX_NUM_FIFO 4
+#define TX_BUF_SIZE 32
+
+#define CONSOLE_NUM_FIFO 2
+#define CONSOLE_BUF_SIZE 4
+
+char *console_fifos[CONSOLE_NUM_FIFO * CONSOLE_BUF_SIZE];
+
+/* The async_struct in serial.h does not really give us what we
+ * need, so define our own here.
+ */
+typedef struct serial_info {
+ int magic;
+ int flags;
+
+ struct serial_state *state;
+ /* struct serial_struct *state; */
+ /* struct async_struct *state; */
+
+ struct tty_struct *tty;
+ int read_status_mask;
+ int ignore_status_mask;
+ int timeout;
+ int line;
+ int x_char; /* xon/xoff character */
+ int close_delay;
+ unsigned short closing_wait;
+ unsigned short closing_wait2;
+ unsigned long event;
+ unsigned long last_active;
+ int blocked_open; /* # of blocked opens */
+ struct work_struct tqueue;
+ struct work_struct tqueue_hangup;
+ wait_queue_head_t open_wait;
+ wait_queue_head_t close_wait;
+
+
+/* CPM Buffer Descriptor pointers.
+ */
+ QUICC_BD *rx_bd_base;
+ QUICC_BD *rx_cur;
+ QUICC_BD *tx_bd_base;
+ QUICC_BD *tx_cur;
+} ser_info_t;
+
+
+/* since kmalloc_init() does not get called until much after this initialization: */
+static ser_info_t quicc_ser_info[NR_PORTS];
+static char rx_buf_pool[NR_PORTS * RX_NUM_FIFO * RX_BUF_SIZE];
+static char tx_buf_pool[NR_PORTS * TX_NUM_FIFO * TX_BUF_SIZE];
+
+static void change_speed(ser_info_t *info);
+static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout);
+
+static inline int serial_paranoia_check(ser_info_t *info,
+ char *name, const char *routine)
+{
+#ifdef SERIAL_PARANOIA_CHECK
+ static const char *badmagic =
+ "Warning: bad magic number for serial struct (%s) in %s\n";
+ static const char *badinfo =
+ "Warning: null async_struct for (%s) in %s\n";
+
+ if (!info) {
+ printk(badinfo, name, routine);
+ return 1;
+ }
+ if (info->magic != SERIAL_MAGIC) {
+ printk(badmagic, name, routine);
+ return 1;
+ }
+#endif
+ return 0;
+}
+
+/*
+ * This is used to figure out the divisor speeds and the timeouts,
+ * indexed by the termio value. The generic CPM functions are responsible
+ * for setting and assigning baud rate generators for us.
+ */
+static int baud_table[] = {
+ 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
+ 9600, 19200, 38400, 57600, 115200, 230400, 460800, 0 };
+
+/* This sucks. There is a better way: */
+#if defined(CONFIG_CONSOLE_9600)
+ #define CONSOLE_BAUDRATE 9600
+#elif defined(CONFIG_CONSOLE_19200)
+ #define CONSOLE_BAUDRATE 19200
+#elif defined(CONFIG_CONSOLE_115200)
+ #define CONSOLE_BAUDRATE 115200
+#else
+ #warning "console baud rate undefined"
+ #define CONSOLE_BAUDRATE 9600
+#endif
+
+/*
+ * ------------------------------------------------------------
+ * rs_stop() and rs_start()
+ *
+ * This routines are called before setting or resetting tty->stopped.
+ * They enable or disable transmitter interrupts, as necessary.
+ * ------------------------------------------------------------
+ */
+static void rs_360_stop(struct tty_struct *tty)
+{
+ ser_info_t *info = (ser_info_t *)tty->driver_data;
+ int idx;
+ unsigned long flags;
+ volatile struct scc_regs *sccp;
+ volatile struct smc_regs *smcp;
+
+ if (serial_paranoia_check(info, tty->name, "rs_stop"))
+ return;
+
+ local_irq_save(flags);
+ idx = PORT_NUM(info->state->smc_scc_num);
+ if (info->state->smc_scc_num & NUM_IS_SCC) {
+ sccp = &pquicc->scc_regs[idx];
+ sccp->scc_sccm &= ~UART_SCCM_TX;
+ } else {
+ /* smcp = &cpmp->cp_smc[idx]; */
+ smcp = &pquicc->smc_regs[idx];
+ smcp->smc_smcm &= ~SMCM_TX;
+ }
+ local_irq_restore(flags);
+}
+
+
+static void rs_360_start(struct tty_struct *tty)
+{
+ ser_info_t *info = (ser_info_t *)tty->driver_data;
+ int idx;
+ unsigned long flags;
+ volatile struct scc_regs *sccp;
+ volatile struct smc_regs *smcp;
+
+ if (serial_paranoia_check(info, tty->name, "rs_stop"))
+ return;
+
+ local_irq_save(flags);
+ idx = PORT_NUM(info->state->smc_scc_num);
+ if (info->state->smc_scc_num & NUM_IS_SCC) {
+ sccp = &pquicc->scc_regs[idx];
+ sccp->scc_sccm |= UART_SCCM_TX;
+ } else {
+ smcp = &pquicc->smc_regs[idx];
+ smcp->smc_smcm |= SMCM_TX;
+ }
+ local_irq_restore(flags);
+}
+
+/*
+ * ----------------------------------------------------------------------
+ *
+ * Here starts the interrupt handling routines. All of the following
+ * subroutines are declared as inline and are folded into
+ * rs_interrupt(). They were separated out for readability's sake.
+ *
+ * Note: rs_interrupt() is a "fast" interrupt, which means that it
+ * runs with interrupts turned off. People who may want to modify
+ * rs_interrupt() should try to keep the interrupt handler as fast as
+ * possible. After you are done making modifications, it is not a bad
+ * idea to do:
+ *
+ * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c
+ *
+ * and look at the resulting assemble code in serial.s.
+ *
+ * - Ted Ts'o (tytso@mit.edu), 7-Mar-93
+ * -----------------------------------------------------------------------
+ */
+
+static _INLINE_ void receive_chars(ser_info_t *info)
+{
+ struct tty_struct *tty = info->tty;
+ unsigned char ch, *cp;
+ /*int ignored = 0;*/
+ int i;
+ ushort status;
+ struct async_icount *icount;
+ /* struct async_icount_24 *icount; */
+ volatile QUICC_BD *bdp;
+
+ icount = &info->state->icount;
+
+ /* Just loop through the closed BDs and copy the characters into
+ * the buffer.
+ */
+ bdp = info->rx_cur;
+ for (;;) {
+ if (bdp->status & BD_SC_EMPTY) /* If this one is empty */
+ break; /* we are all done */
+
+ /* The read status mask tell us what we should do with
+ * incoming characters, especially if errors occur.
+ * One special case is the use of BD_SC_EMPTY. If
+ * this is not set, we are supposed to be ignoring
+ * inputs. In this case, just mark the buffer empty and
+ * continue.
+ */
+ if (!(info->read_status_mask & BD_SC_EMPTY)) {
+ bdp->status |= BD_SC_EMPTY;
+ bdp->status &=
+ ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV);
+
+ if (bdp->status & BD_SC_WRAP)
+ bdp = info->rx_bd_base;
+ else
+ bdp++;
+ continue;
+ }
+
+ /* Get the number of characters and the buffer pointer.
+ */
+ i = bdp->length;
+ /* cp = (unsigned char *)__va(bdp->buf); */
+ cp = (char *)bdp->buf;
+ status = bdp->status;
+
+ /* Check to see if there is room in the tty buffer for
+ * the characters in our BD buffer. If not, we exit
+ * now, leaving the BD with the characters. We'll pick
+ * them up again on the next receive interrupt (which could
+ * be a timeout).
+ */
+ if ((tty->flip.count + i) >= TTY_FLIPBUF_SIZE)
+ break;
+
+ while (i-- > 0) {
+ ch = *cp++;
+ *tty->flip.char_buf_ptr = ch;
+ icount->rx++;
+
+#ifdef SERIAL_DEBUG_INTR
+ printk("DR%02x:%02x...", ch, status);
+#endif
+ *tty->flip.flag_buf_ptr = 0;
+ if (status & (BD_SC_BR | BD_SC_FR |
+ BD_SC_PR | BD_SC_OV)) {
+ /*
+ * For statistics only
+ */
+ if (status & BD_SC_BR)
+ icount->brk++;
+ else if (status & BD_SC_PR)
+ icount->parity++;
+ else if (status & BD_SC_FR)
+ icount->frame++;
+ if (status & BD_SC_OV)
+ icount->overrun++;
+
+ /*
+ * Now check to see if character should be
+ * ignored, and mask off conditions which
+ * should be ignored.
+ if (status & info->ignore_status_mask) {
+ if (++ignored > 100)
+ break;
+ continue;
+ }
+ */
+ status &= info->read_status_mask;
+
+ if (status & (BD_SC_BR)) {
+#ifdef SERIAL_DEBUG_INTR
+ printk("handling break....");
+#endif
+ *tty->flip.flag_buf_ptr = TTY_BREAK;
+ if (info->flags & ASYNC_SAK)
+ do_SAK(tty);
+ } else if (status & BD_SC_PR)
+ *tty->flip.flag_buf_ptr = TTY_PARITY;
+ else if (status & BD_SC_FR)
+ *tty->flip.flag_buf_ptr = TTY_FRAME;
+ if (status & BD_SC_OV) {
+ /*
+ * Overrun is special, since it's
+ * reported immediately, and doesn't
+ * affect the current character
+ */
+ if (tty->flip.count < TTY_FLIPBUF_SIZE) {
+ tty->flip.count++;
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ *tty->flip.flag_buf_ptr =
+ TTY_OVERRUN;
+ }
+ }
+ }
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+ break;
+
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ tty->flip.count++;
+ }
+
+ /* This BD is ready to be used again. Clear status.
+ * Get next BD.
+ */
+ bdp->status |= BD_SC_EMPTY;
+ bdp->status &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV);
+
+ if (bdp->status & BD_SC_WRAP)
+ bdp = info->rx_bd_base;
+ else
+ bdp++;
+ }
+
+ info->rx_cur = (QUICC_BD *)bdp;
+
+ schedule_work(&tty->flip.work);
+}
+
+static _INLINE_ void receive_break(ser_info_t *info)
+{
+ struct tty_struct *tty = info->tty;
+
+ info->state->icount.brk++;
+ /* Check to see if there is room in the tty buffer for
+ * the break. If not, we exit now, losing the break. FIXME
+ */
+ if ((tty->flip.count + 1) >= TTY_FLIPBUF_SIZE)
+ return;
+ *(tty->flip.flag_buf_ptr++) = TTY_BREAK;
+ *(tty->flip.char_buf_ptr++) = 0;
+ tty->flip.count++;
+
+ schedule_work(&tty->flip.work);
+}
+
+static _INLINE_ void transmit_chars(ser_info_t *info)
+{
+
+ if ((info->flags & TX_WAKEUP) ||
+ (info->tty->flags & (1 << TTY_DO_WRITE_WAKEUP))) {
+ schedule_work(&info->tqueue);
+ }
+
+#ifdef SERIAL_DEBUG_INTR
+ printk("THRE...");
+#endif
+}
+
+#ifdef notdef
+ /* I need to do this for the SCCs, so it is left as a reminder.
+ */
+static _INLINE_ void check_modem_status(struct async_struct *info)
+{
+ int status;
+ /* struct async_icount *icount; */
+ struct async_icount_24 *icount;
+
+ status = serial_in(info, UART_MSR);
+
+ if (status & UART_MSR_ANY_DELTA) {
+ icount = &info->state->icount;
+ /* update input line counters */
+ if (status & UART_MSR_TERI)
+ icount->rng++;
+ if (status & UART_MSR_DDSR)
+ icount->dsr++;
+ if (status & UART_MSR_DDCD) {
+ icount->dcd++;
+#ifdef CONFIG_HARD_PPS
+ if ((info->flags & ASYNC_HARDPPS_CD) &&
+ (status & UART_MSR_DCD))
+ hardpps();
+#endif
+ }
+ if (status & UART_MSR_DCTS)
+ icount->cts++;
+ wake_up_interruptible(&info->delta_msr_wait);
+ }
+
+ if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
+#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR))
+ printk("ttys%d CD now %s...", info->line,
+ (status & UART_MSR_DCD) ? "on" : "off");
+#endif
+ if (status & UART_MSR_DCD)
+ wake_up_interruptible(&info->open_wait);
+ else {
+#ifdef SERIAL_DEBUG_OPEN
+ printk("scheduling hangup...");
+#endif
+ queue_task(&info->tqueue_hangup,
+ &tq_scheduler);
+ }
+ }
+ if (info->flags & ASYNC_CTS_FLOW) {
+ if (info->tty->hw_stopped) {
+ if (status & UART_MSR_CTS) {
+#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
+ printk("CTS tx start...");
+#endif
+ info->tty->hw_stopped = 0;
+ info->IER |= UART_IER_THRI;
+ serial_out(info, UART_IER, info->IER);
+ rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
+ return;
+ }
+ } else {
+ if (!(status & UART_MSR_CTS)) {
+#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
+ printk("CTS tx stop...");
+#endif
+ info->tty->hw_stopped = 1;
+ info->IER &= ~UART_IER_THRI;
+ serial_out(info, UART_IER, info->IER);
+ }
+ }
+ }
+}
+#endif
+
+/*
+ * This is the serial driver's interrupt routine for a single port
+ */
+/* static void rs_360_interrupt(void *dev_id) */ /* until and if we start servicing irqs here */
+static void rs_360_interrupt(int vec, void *dev_id, struct pt_regs *fp)
+{
+ u_char events;
+ int idx;
+ ser_info_t *info;
+ volatile struct smc_regs *smcp;
+ volatile struct scc_regs *sccp;
+
+ info = (ser_info_t *)dev_id;
+
+ idx = PORT_NUM(info->state->smc_scc_num);
+ if (info->state->smc_scc_num & NUM_IS_SCC) {
+ sccp = &pquicc->scc_regs[idx];
+ events = sccp->scc_scce;
+ if (events & SCCM_RX)
+ receive_chars(info);
+ if (events & SCCM_TX)
+ transmit_chars(info);
+ sccp->scc_scce = events;
+ } else {
+ smcp = &pquicc->smc_regs[idx];
+ events = smcp->smc_smce;
+ if (events & SMCM_BRKE)
+ receive_break(info);
+ if (events & SMCM_RX)
+ receive_chars(info);
+ if (events & SMCM_TX)
+ transmit_chars(info);
+ smcp->smc_smce = events;
+ }
+
+#ifdef SERIAL_DEBUG_INTR
+ printk("rs_interrupt_single(%d, %x)...",
+ info->state->smc_scc_num, events);
+#endif
+#ifdef modem_control
+ check_modem_status(info);
+#endif
+ info->last_active = jiffies;
+#ifdef SERIAL_DEBUG_INTR
+ printk("end.\n");
+#endif
+}
+
+
+/*
+ * -------------------------------------------------------------------
+ * Here ends the serial interrupt routines.
+ * -------------------------------------------------------------------
+ */
+
+
+static void do_softint(void *private_)
+{
+ ser_info_t *info = (ser_info_t *) private_;
+ struct tty_struct *tty;
+
+ tty = info->tty;
+ if (!tty)
+ return;
+
+ if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event))
+ tty_wakeup(tty);
+}
+
+
+/*
+ * This routine is called from the scheduler tqueue when the interrupt
+ * routine has signalled that a hangup has occurred. The path of
+ * hangup processing is:
+ *
+ * serial interrupt routine -> (scheduler tqueue) ->
+ * do_serial_hangup() -> tty->hangup() -> rs_hangup()
+ *
+ */
+static void do_serial_hangup(void *private_)
+{
+ struct async_struct *info = (struct async_struct *) private_;
+ struct tty_struct *tty;
+
+ tty = info->tty;
+ if (!tty)
+ return;
+
+ tty_hangup(tty);
+}
+
+
+static int startup(ser_info_t *info)
+{
+ unsigned long flags;
+ int retval=0;
+ int idx;
+ /*struct serial_state *state = info->state;*/
+ volatile struct smc_regs *smcp;
+ volatile struct scc_regs *sccp;
+ volatile struct smc_uart_pram *up;
+ volatile struct uart_pram *scup;
+
+
+ local_irq_save(flags);
+
+ if (info->flags & ASYNC_INITIALIZED) {
+ goto errout;
+ }
+
+#ifdef maybe
+ if (!state->port || !state->type) {
+ if (info->tty)
+ set_bit(TTY_IO_ERROR, &info->tty->flags);
+ goto errout;
+ }
+#endif
+
+#ifdef SERIAL_DEBUG_OPEN
+ printk("starting up ttys%d (irq %d)...", info->line, state->irq);
+#endif
+
+
+#ifdef modem_control
+ info->MCR = 0;
+ if (info->tty->termios->c_cflag & CBAUD)
+ info->MCR = UART_MCR_DTR | UART_MCR_RTS;
+#endif
+
+ if (info->tty)
+ clear_bit(TTY_IO_ERROR, &info->tty->flags);
+
+ /*
+ * and set the speed of the serial port
+ */
+ change_speed(info);
+
+ idx = PORT_NUM(info->state->smc_scc_num);
+ if (info->state->smc_scc_num & NUM_IS_SCC) {
+ sccp = &pquicc->scc_regs[idx];
+ scup = &pquicc->pram[info->state->port].scc.pscc.u;
+
+ scup->mrblr = RX_BUF_SIZE;
+ scup->max_idl = RX_BUF_SIZE;
+
+ sccp->scc_sccm |= (UART_SCCM_TX | UART_SCCM_RX);
+ sccp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+ } else {
+ smcp = &pquicc->smc_regs[idx];
+
+ /* Enable interrupts and I/O.
+ */
+ smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
+ smcp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN);
+
+ /* We can tune the buffer length and idle characters
+ * to take advantage of the entire incoming buffer size.
+ * If mrblr is something other than 1, maxidl has to be
+ * non-zero or we never get an interrupt. The maxidl
+ * is the number of character times we wait after reception
+ * of the last character before we decide no more characters
+ * are coming.
+ */
+ /* up = (smc_uart_t *)&pquicc->cp_dparam[state->port]; */
+ /* holy unionized structures, Batman: */
+ up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u;
+
+ up->mrblr = RX_BUF_SIZE;
+ up->max_idl = RX_BUF_SIZE;
+
+ up->brkcr = 1; /* number of break chars */
+ }
+
+ info->flags |= ASYNC_INITIALIZED;
+ local_irq_restore(flags);
+ return 0;
+
+errout:
+ local_irq_restore(flags);
+ return retval;
+}
+
+/*
+ * This routine will shutdown a serial port; interrupts are disabled, and
+ * DTR is dropped if the hangup on close termio flag is on.
+ */
+static void shutdown(ser_info_t *info)
+{
+ unsigned long flags;
+ struct serial_state *state;
+ int idx;
+ volatile struct smc_regs *smcp;
+ volatile struct scc_regs *sccp;
+
+ if (!(info->flags & ASYNC_INITIALIZED))
+ return;
+
+ state = info->state;
+
+#ifdef SERIAL_DEBUG_OPEN
+ printk("Shutting down serial port %d (irq %d)....", info->line,
+ state->irq);
+#endif
+
+ local_irq_save(flags);
+
+ idx = PORT_NUM(state->smc_scc_num);
+ if (state->smc_scc_num & NUM_IS_SCC) {
+ sccp = &pquicc->scc_regs[idx];
+ sccp->scc_gsmr.w.low &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+#ifdef CONFIG_SERIAL_CONSOLE
+ /* We can't disable the transmitter if this is the
+ * system console.
+ */
+ if ((state - rs_table) != CONFIG_SERIAL_CONSOLE_PORT)
+#endif
+ sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX);
+ } else {
+ smcp = &pquicc->smc_regs[idx];
+
+ /* Disable interrupts and I/O.
+ */
+ smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
+#ifdef CONFIG_SERIAL_CONSOLE
+ /* We can't disable the transmitter if this is the
+ * system console.
+ */
+ if ((state - rs_table) != CONFIG_SERIAL_CONSOLE_PORT)
+#endif
+ smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+ }
+
+ if (info->tty)
+ set_bit(TTY_IO_ERROR, &info->tty->flags);
+
+ info->flags &= ~ASYNC_INITIALIZED;
+ local_irq_restore(flags);
+}
+
+/*
+ * This routine is called to set the UART divisor registers to match
+ * the specified baud rate for a serial port.
+ */
+static void change_speed(ser_info_t *info)
+{
+ int baud_rate;
+ unsigned cflag, cval, scval, prev_mode;
+ int i, bits, sbits, idx;
+ unsigned long flags;
+ struct serial_state *state;
+ volatile struct smc_regs *smcp;
+ volatile struct scc_regs *sccp;
+
+ if (!info->tty || !info->tty->termios)
+ return;
+ cflag = info->tty->termios->c_cflag;
+
+ state = info->state;
+
+ /* Character length programmed into the mode register is the
+ * sum of: 1 start bit, number of data bits, 0 or 1 parity bit,
+ * 1 or 2 stop bits, minus 1.
+ * The value 'bits' counts this for us.
+ */
+ cval = 0;
+ scval = 0;
+
+ /* byte size and parity */
+ switch (cflag & CSIZE) {
+ case CS5: bits = 5; break;
+ case CS6: bits = 6; break;
+ case CS7: bits = 7; break;
+ case CS8: bits = 8; break;
+ /* Never happens, but GCC is too dumb to figure it out */
+ default: bits = 8; break;
+ }
+ sbits = bits - 5;
+
+ if (cflag & CSTOPB) {
+ cval |= SMCMR_SL; /* Two stops */
+ scval |= SCU_PMSR_SL;
+ bits++;
+ }
+ if (cflag & PARENB) {
+ cval |= SMCMR_PEN;
+ scval |= SCU_PMSR_PEN;
+ bits++;
+ }
+ if (!(cflag & PARODD)) {
+ cval |= SMCMR_PM_EVEN;
+ scval |= (SCU_PMSR_REVP | SCU_PMSR_TEVP);
+ }
+
+ /* Determine divisor based on baud rate */
+ i = cflag & CBAUD;
+ if (i >= (sizeof(baud_table)/sizeof(int)))
+ baud_rate = 9600;
+ else
+ baud_rate = baud_table[i];
+
+ info->timeout = (TX_BUF_SIZE*HZ*bits);
+ info->timeout += HZ/50; /* Add .02 seconds of slop */
+
+#ifdef modem_control
+ /* CTS flow control flag and modem status interrupts */
+ info->IER &= ~UART_IER_MSI;
+ if (info->flags & ASYNC_HARDPPS_CD)
+ info->IER |= UART_IER_MSI;
+ if (cflag & CRTSCTS) {
+ info->flags |= ASYNC_CTS_FLOW;
+ info->IER |= UART_IER_MSI;
+ } else
+ info->flags &= ~ASYNC_CTS_FLOW;
+ if (cflag & CLOCAL)
+ info->flags &= ~ASYNC_CHECK_CD;
+ else {
+ info->flags |= ASYNC_CHECK_CD;
+ info->IER |= UART_IER_MSI;
+ }
+ serial_out(info, UART_IER, info->IER);
+#endif
+
+ /*
+ * Set up parity check flag
+ */
+#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+
+ info->read_status_mask = (BD_SC_EMPTY | BD_SC_OV);
+ if (I_INPCK(info->tty))
+ info->read_status_mask |= BD_SC_FR | BD_SC_PR;
+ if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
+ info->read_status_mask |= BD_SC_BR;
+
+ /*
+ * Characters to ignore
+ */
+ info->ignore_status_mask = 0;
+ if (I_IGNPAR(info->tty))
+ info->ignore_status_mask |= BD_SC_PR | BD_SC_FR;
+ if (I_IGNBRK(info->tty)) {
+ info->ignore_status_mask |= BD_SC_BR;
+ /*
+ * If we're ignore parity and break indicators, ignore
+ * overruns too. (For real raw support).
+ */
+ if (I_IGNPAR(info->tty))
+ info->ignore_status_mask |= BD_SC_OV;
+ }
+ /*
+ * !!! ignore all characters if CREAD is not set
+ */
+ if ((cflag & CREAD) == 0)
+ info->read_status_mask &= ~BD_SC_EMPTY;
+ local_irq_save(flags);
+
+ /* Start bit has not been added (so don't, because we would just
+ * subtract it later), and we need to add one for the number of
+ * stops bits (there is always at least one).
+ */
+ bits++;
+ idx = PORT_NUM(state->smc_scc_num);
+ if (state->smc_scc_num & NUM_IS_SCC) {
+ sccp = &pquicc->scc_regs[idx];
+ sccp->scc_psmr = (sbits << 12) | scval;
+ } else {
+ smcp = &pquicc->smc_regs[idx];
+
+ /* Set the mode register. We want to keep a copy of the
+ * enables, because we want to put them back if they were
+ * present.
+ */
+ prev_mode = smcp->smc_smcmr;
+ smcp->smc_smcmr = smcr_mk_clen(bits) | cval | SMCMR_SM_UART;
+ smcp->smc_smcmr |= (prev_mode & (SMCMR_REN | SMCMR_TEN));
+ }
+
+ m360_cpm_setbrg((state - rs_table), baud_rate);
+
+ local_irq_restore(flags);
+}
+
+static void rs_360_put_char(struct tty_struct *tty, unsigned char ch)
+{
+ ser_info_t *info = (ser_info_t *)tty->driver_data;
+ volatile QUICC_BD *bdp;
+
+ if (serial_paranoia_check(info, tty->name, "rs_put_char"))
+ return;
+
+ if (!tty)
+ return;
+
+ bdp = info->tx_cur;
+ while (bdp->status & BD_SC_READY);
+
+ /* *((char *)__va(bdp->buf)) = ch; */
+ *((char *)bdp->buf) = ch;
+ bdp->length = 1;
+ bdp->status |= BD_SC_READY;
+
+ /* Get next BD.
+ */
+ if (bdp->status & BD_SC_WRAP)
+ bdp = info->tx_bd_base;
+ else
+ bdp++;
+
+ info->tx_cur = (QUICC_BD *)bdp;
+
+}
+
+static int rs_360_write(struct tty_struct * tty,
+ const unsigned char *buf, int count)
+{
+ int c, ret = 0;
+ ser_info_t *info = (ser_info_t *)tty->driver_data;
+ volatile QUICC_BD *bdp;
+
+#ifdef CONFIG_KGDB
+ /* Try to let stub handle output. Returns true if it did. */
+ if (kgdb_output_string(buf, count))
+ return ret;
+#endif
+
+ if (serial_paranoia_check(info, tty->name, "rs_write"))
+ return 0;
+
+ if (!tty)
+ return 0;
+
+ bdp = info->tx_cur;
+
+ while (1) {
+ c = min(count, TX_BUF_SIZE);
+
+ if (c <= 0)
+ break;
+
+ if (bdp->status & BD_SC_READY) {
+ info->flags |= TX_WAKEUP;
+ break;
+ }
+
+ /* memcpy(__va(bdp->buf), buf, c); */
+ memcpy((void *)bdp->buf, buf, c);
+
+ bdp->length = c;
+ bdp->status |= BD_SC_READY;
+
+ buf += c;
+ count -= c;
+ ret += c;
+
+ /* Get next BD.
+ */
+ if (bdp->status & BD_SC_WRAP)
+ bdp = info->tx_bd_base;
+ else
+ bdp++;
+ info->tx_cur = (QUICC_BD *)bdp;
+ }
+ return ret;
+}
+
+static int rs_360_write_room(struct tty_struct *tty)
+{
+ ser_info_t *info = (ser_info_t *)tty->driver_data;
+ int ret;
+
+ if (serial_paranoia_check(info, tty->name, "rs_write_room"))
+ return 0;
+
+ if ((info->tx_cur->status & BD_SC_READY) == 0) {
+ info->flags &= ~TX_WAKEUP;
+ ret = TX_BUF_SIZE;
+ }
+ else {
+ info->flags |= TX_WAKEUP;
+ ret = 0;
+ }
+ return ret;
+}
+
+/* I could track this with transmit counters....maybe later.
+*/
+static int rs_360_chars_in_buffer(struct tty_struct *tty)
+{
+ ser_info_t *info = (ser_info_t *)tty->driver_data;
+
+ if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer"))
+ return 0;
+ return 0;
+}
+
+static void rs_360_flush_buffer(struct tty_struct *tty)
+{
+ ser_info_t *info = (ser_info_t *)tty->driver_data;
+
+ if (serial_paranoia_check(info, tty->name, "rs_flush_buffer"))
+ return;
+
+ /* There is nothing to "flush", whatever we gave the CPM
+ * is on its way out.
+ */
+ tty_wakeup(tty);
+ info->flags &= ~TX_WAKEUP;
+}
+
+/*
+ * This function is used to send a high-priority XON/XOFF character to
+ * the device
+ */
+static void rs_360_send_xchar(struct tty_struct *tty, char ch)
+{
+ volatile QUICC_BD *bdp;
+
+ ser_info_t *info = (ser_info_t *)tty->driver_data;
+
+ if (serial_paranoia_check(info, tty->name, "rs_send_char"))
+ return;
+
+ bdp = info->tx_cur;
+ while (bdp->status & BD_SC_READY);
+
+ /* *((char *)__va(bdp->buf)) = ch; */
+ *((char *)bdp->buf) = ch;
+ bdp->length = 1;
+ bdp->status |= BD_SC_READY;
+
+ /* Get next BD.
+ */
+ if (bdp->status & BD_SC_WRAP)
+ bdp = info->tx_bd_base;
+ else
+ bdp++;
+
+ info->tx_cur = (QUICC_BD *)bdp;
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_throttle()
+ *
+ * This routine is called by the upper-layer tty layer to signal that
+ * incoming characters should be throttled.
+ * ------------------------------------------------------------
+ */
+static void rs_360_throttle(struct tty_struct * tty)
+{
+ ser_info_t *info = (ser_info_t *)tty->driver_data;
+#ifdef SERIAL_DEBUG_THROTTLE
+ char buf[64];
+
+ printk("throttle %s: %d....\n", _tty_name(tty, buf),
+ tty->ldisc.chars_in_buffer(tty));
+#endif
+
+ if (serial_paranoia_check(info, tty->name, "rs_throttle"))
+ return;
+
+ if (I_IXOFF(tty))
+ rs_360_send_xchar(tty, STOP_CHAR(tty));
+
+#ifdef modem_control
+ if (tty->termios->c_cflag & CRTSCTS)
+ info->MCR &= ~UART_MCR_RTS;
+
+ local_irq_disable();
+ serial_out(info, UART_MCR, info->MCR);
+ local_irq_enable();
+#endif
+}
+
+static void rs_360_unthrottle(struct tty_struct * tty)
+{
+ ser_info_t *info = (ser_info_t *)tty->driver_data;
+#ifdef SERIAL_DEBUG_THROTTLE
+ char buf[64];
+
+ printk("unthrottle %s: %d....\n", _tty_name(tty, buf),
+ tty->ldisc.chars_in_buffer(tty));
+#endif
+
+ if (serial_paranoia_check(info, tty->name, "rs_unthrottle"))
+ return;
+
+ if (I_IXOFF(tty)) {
+ if (info->x_char)
+ info->x_char = 0;
+ else
+ rs_360_send_xchar(tty, START_CHAR(tty));
+ }
+#ifdef modem_control
+ if (tty->termios->c_cflag & CRTSCTS)
+ info->MCR |= UART_MCR_RTS;
+ local_irq_disable();
+ serial_out(info, UART_MCR, info->MCR);
+ local_irq_enable();
+#endif
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_ioctl() and friends
+ * ------------------------------------------------------------
+ */
+
+#ifdef maybe
+/*
+ * get_lsr_info - get line status register info
+ *
+ * Purpose: Let user call ioctl() to get info when the UART physically
+ * is emptied. On bus types like RS485, the transmitter must
+ * release the bus after transmitting. This must be done when
+ * the transmit shift register is empty, not be done when the
+ * transmit holding register is empty. This functionality
+ * allows an RS485 driver to be written in user space.
+ */
+static int get_lsr_info(struct async_struct * info, unsigned int *value)
+{
+ unsigned char status;
+ unsigned int result;
+
+ local_irq_disable();
+ status = serial_in(info, UART_LSR);
+ local_irq_enable();
+ result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0);
+ return put_user(result,value);
+}
+#endif
+
+static int rs_360_tiocmget(struct tty_struct *tty, struct file *file)
+{
+ ser_info_t *info = (ser_info_t *)tty->driver_data;
+ unsigned int result = 0;
+#ifdef modem_control
+ unsigned char control, status;
+
+ if (serial_paranoia_check(info, tty->name, __FUNCTION__))
+ return -ENODEV;
+
+ if (tty->flags & (1 << TTY_IO_ERROR))
+ return -EIO;
+
+ control = info->MCR;
+ local_irq_disable();
+ status = serial_in(info, UART_MSR);
+ local_irq_enable();
+ result = ((control & UART_MCR_RTS) ? TIOCM_RTS : 0)
+ | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0)
+#ifdef TIOCM_OUT1
+ | ((control & UART_MCR_OUT1) ? TIOCM_OUT1 : 0)
+ | ((control & UART_MCR_OUT2) ? TIOCM_OUT2 : 0)
+#endif
+ | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0)
+ | ((status & UART_MSR_RI) ? TIOCM_RNG : 0)
+ | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0)
+ | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0);
+#endif
+ return result;
+}
+
+static int rs_360_tiocmset(struct tty_struct *tty, struct file *file,
+ unsigned int set, unsigned int clear)
+{
+#ifdef modem_control
+ ser_info_t *info = (ser_info_t *)tty->driver_data;
+ unsigned int arg;
+
+ if (serial_paranoia_check(info, tty->name, __FUNCTION__))
+ return -ENODEV;
+
+ if (tty->flags & (1 << TTY_IO_ERROR))
+ return -EIO;
+
+ if (set & TIOCM_RTS)
+ info->mcr |= UART_MCR_RTS;
+ if (set & TIOCM_DTR)
+ info->mcr |= UART_MCR_DTR;
+ if (clear & TIOCM_RTS)
+ info->MCR &= ~UART_MCR_RTS;
+ if (clear & TIOCM_DTR)
+ info->MCR &= ~UART_MCR_DTR;
+
+#ifdef TIOCM_OUT1
+ if (set & TIOCM_OUT1)
+ info->MCR |= UART_MCR_OUT1;
+ if (set & TIOCM_OUT2)
+ info->MCR |= UART_MCR_OUT2;
+ if (clear & TIOCM_OUT1)
+ info->MCR &= ~UART_MCR_OUT1;
+ if (clear & TIOCM_OUT2)
+ info->MCR &= ~UART_MCR_OUT2;
+#endif
+
+ local_irq_disable();
+ serial_out(info, UART_MCR, info->MCR);
+ local_irq_enable();
+#endif
+ return 0;
+}
+
+/* Sending a break is a two step process on the SMC/SCC. It is accomplished
+ * by sending a STOP TRANSMIT command followed by a RESTART TRANSMIT
+ * command. We take advantage of the begin/end functions to make this
+ * happen.
+ */
+static ushort smc_chan_map[] = {
+ CPM_CR_CH_SMC1,
+ CPM_CR_CH_SMC2
+};
+
+static ushort scc_chan_map[] = {
+ CPM_CR_CH_SCC1,
+ CPM_CR_CH_SCC2,
+ CPM_CR_CH_SCC3,
+ CPM_CR_CH_SCC4
+};
+
+static void begin_break(ser_info_t *info)
+{
+ volatile QUICC *cp;
+ ushort chan;
+ int idx;
+
+ cp = pquicc;
+
+ idx = PORT_NUM(info->state->smc_scc_num);
+ if (info->state->smc_scc_num & NUM_IS_SCC)
+ chan = scc_chan_map[idx];
+ else
+ chan = smc_chan_map[idx];
+
+ cp->cp_cr = mk_cr_cmd(chan, CPM_CR_STOP_TX) | CPM_CR_FLG;
+ while (cp->cp_cr & CPM_CR_FLG);
+}
+
+static void end_break(ser_info_t *info)
+{
+ volatile QUICC *cp;
+ ushort chan;
+ int idx;
+
+ cp = pquicc;
+
+ idx = PORT_NUM(info->state->smc_scc_num);
+ if (info->state->smc_scc_num & NUM_IS_SCC)
+ chan = scc_chan_map[idx];
+ else
+ chan = smc_chan_map[idx];
+
+ cp->cp_cr = mk_cr_cmd(chan, CPM_CR_RESTART_TX) | CPM_CR_FLG;
+ while (cp->cp_cr & CPM_CR_FLG);
+}
+
+/*
+ * This routine sends a break character out the serial port.
+ */
+static void send_break(ser_info_t *info, int duration)
+{
+ set_current_state(TASK_INTERRUPTIBLE);
+#ifdef SERIAL_DEBUG_SEND_BREAK
+ printk("rs_send_break(%d) jiff=%lu...", duration, jiffies);
+#endif
+ begin_break(info);
+ schedule_timeout(duration);
+ end_break(info);
+#ifdef SERIAL_DEBUG_SEND_BREAK
+ printk("done jiffies=%lu\n", jiffies);
+#endif
+}
+
+
+static int rs_360_ioctl(struct tty_struct *tty, struct file * file,
+ unsigned int cmd, unsigned long arg)
+{
+ int error;
+ ser_info_t *info = (ser_info_t *)tty->driver_data;
+ int retval;
+ struct async_icount cnow;
+ /* struct async_icount_24 cnow;*/ /* kernel counter temps */
+ struct serial_icounter_struct *p_cuser; /* user space */
+
+ if (serial_paranoia_check(info, tty->name, "rs_ioctl"))
+ return -ENODEV;
+
+ if ((cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+ if (tty->flags & (1 << TTY_IO_ERROR))
+ return -EIO;
+ }
+
+ switch (cmd) {
+ case TCSBRK: /* SVID version: non-zero arg --> no break */
+ retval = tty_check_change(tty);
+ if (retval)
+ return retval;
+ tty_wait_until_sent(tty, 0);
+ if (signal_pending(current))
+ return -EINTR;
+ if (!arg) {
+ send_break(info, HZ/4); /* 1/4 second */
+ if (signal_pending(current))
+ return -EINTR;
+ }
+ return 0;
+ case TCSBRKP: /* support for POSIX tcsendbreak() */
+ retval = tty_check_change(tty);
+ if (retval)
+ return retval;
+ tty_wait_until_sent(tty, 0);
+ if (signal_pending(current))
+ return -EINTR;
+ send_break(info, arg ? arg*(HZ/10) : HZ/4);
+ if (signal_pending(current))
+ return -EINTR;
+ return 0;
+ case TIOCSBRK:
+ retval = tty_check_change(tty);
+ if (retval)
+ return retval;
+ tty_wait_until_sent(tty, 0);
+ begin_break(info);
+ return 0;
+ case TIOCCBRK:
+ retval = tty_check_change(tty);
+ if (retval)
+ return retval;
+ end_break(info);
+ return 0;
+ case TIOCGSOFTCAR:
+ /* return put_user(C_CLOCAL(tty) ? 1 : 0, (int *) arg); */
+ put_user(C_CLOCAL(tty) ? 1 : 0, (int *) arg);
+ return 0;
+ case TIOCSSOFTCAR:
+ error = get_user(arg, (unsigned int *) arg);
+ if (error)
+ return error;
+ tty->termios->c_cflag =
+ ((tty->termios->c_cflag & ~CLOCAL) |
+ (arg ? CLOCAL : 0));
+ return 0;
+#ifdef maybe
+ case TIOCSERGETLSR: /* Get line status register */
+ return get_lsr_info(info, (unsigned int *) arg);
+#endif
+ /*
+ * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
+ * - mask passed in arg for lines of interest
+ * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
+ * Caller should use TIOCGICOUNT to see which one it was
+ */
+ case TIOCMIWAIT:
+#ifdef modem_control
+ local_irq_disable();
+ /* note the counters on entry */
+ cprev = info->state->icount;
+ local_irq_enable();
+ while (1) {
+ interruptible_sleep_on(&info->delta_msr_wait);
+ /* see if a signal did it */
+ if (signal_pending(current))
+ return -ERESTARTSYS;
+ local_irq_disable();
+ cnow = info->state->icount; /* atomic copy */
+ local_irq_enable();
+ if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
+ cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
+ return -EIO; /* no change => error */
+ if ( ((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
+ ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
+ ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
+ ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) {
+ return 0;
+ }
+ cprev = cnow;
+ }
+ /* NOTREACHED */
+#else
+ return 0;
+#endif
+
+ /*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ * RI where only 0->1 is counted.
+ */
+ case TIOCGICOUNT:
+ local_irq_disable();
+ cnow = info->state->icount;
+ local_irq_enable();
+ p_cuser = (struct serial_icounter_struct *) arg;
+/* error = put_user(cnow.cts, &p_cuser->cts); */
+/* if (error) return error; */
+/* error = put_user(cnow.dsr, &p_cuser->dsr); */
+/* if (error) return error; */
+/* error = put_user(cnow.rng, &p_cuser->rng); */
+/* if (error) return error; */
+/* error = put_user(cnow.dcd, &p_cuser->dcd); */
+/* if (error) return error; */
+
+ put_user(cnow.cts, &p_cuser->cts);
+ put_user(cnow.dsr, &p_cuser->dsr);
+ put_user(cnow.rng, &p_cuser->rng);
+ put_user(cnow.dcd, &p_cuser->dcd);
+ return 0;
+
+ default:
+ return -ENOIOCTLCMD;
+ }
+ return 0;
+}
+
+/* FIX UP modem control here someday......
+*/
+static void rs_360_set_termios(struct tty_struct *tty, struct termios *old_termios)
+{
+ ser_info_t *info = (ser_info_t *)tty->driver_data;
+
+ if ( (tty->termios->c_cflag == old_termios->c_cflag)
+ && ( RELEVANT_IFLAG(tty->termios->c_iflag)
+ == RELEVANT_IFLAG(old_termios->c_iflag)))
+ return;
+
+ change_speed(info);
+
+#ifdef modem_control
+ /* Handle transition to B0 status */
+ if ((old_termios->c_cflag & CBAUD) &&
+ !(tty->termios->c_cflag & CBAUD)) {
+ info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS);
+ local_irq_disable();
+ serial_out(info, UART_MCR, info->MCR);
+ local_irq_enable();
+ }
+
+ /* Handle transition away from B0 status */
+ if (!(old_termios->c_cflag & CBAUD) &&
+ (tty->termios->c_cflag & CBAUD)) {
+ info->MCR |= UART_MCR_DTR;
+ if (!tty->hw_stopped ||
+ !(tty->termios->c_cflag & CRTSCTS)) {
+ info->MCR |= UART_MCR_RTS;
+ }
+ local_irq_disable();
+ serial_out(info, UART_MCR, info->MCR);
+ local_irq_enable();
+ }
+
+ /* Handle turning off CRTSCTS */
+ if ((old_termios->c_cflag & CRTSCTS) &&
+ !(tty->termios->c_cflag & CRTSCTS)) {
+ tty->hw_stopped = 0;
+ rs_360_start(tty);
+ }
+#endif
+
+#if 0
+ /*
+ * No need to wake up processes in open wait, since they
+ * sample the CLOCAL flag once, and don't recheck it.
+ * XXX It's not clear whether the current behavior is correct
+ * or not. Hence, this may change.....
+ */
+ if (!(old_termios->c_cflag & CLOCAL) &&
+ (tty->termios->c_cflag & CLOCAL))
+ wake_up_interruptible(&info->open_wait);
+#endif
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_close()
+ *
+ * This routine is called when the serial port gets closed. First, we
+ * wait for the last remaining data to be sent. Then, we unlink its
+ * async structure from the interrupt chain if necessary, and we free
+ * that IRQ if nothing is left in the chain.
+ * ------------------------------------------------------------
+ */
+static void rs_360_close(struct tty_struct *tty, struct file * filp)
+{
+ ser_info_t *info = (ser_info_t *)tty->driver_data;
+ /* struct async_state *state; */
+ struct serial_state *state;
+ unsigned long flags;
+ int idx;
+ volatile struct smc_regs *smcp;
+ volatile struct scc_regs *sccp;
+
+ if (!info || serial_paranoia_check(info, tty->name, "rs_close"))
+ return;
+
+ state = info->state;
+
+ local_irq_save(flags);
+
+ if (tty_hung_up_p(filp)) {
+ DBG_CNT("before DEC-hung");
+ local_irq_restore(flags);
+ return;
+ }
+
+#ifdef SERIAL_DEBUG_OPEN
+ printk("rs_close ttys%d, count = %d\n", info->line, state->count);
+#endif
+ if ((tty->count == 1) && (state->count != 1)) {
+ /*
+ * Uh, oh. tty->count is 1, which means that the tty
+ * structure will be freed. state->count should always
+ * be one in these conditions. If it's greater than
+ * one, we've got real problems, since it means the
+ * serial port won't be shutdown.
+ */
+ printk("rs_close: bad serial port count; tty->count is 1, "
+ "state->count is %d\n", state->count);
+ state->count = 1;
+ }
+ if (--state->count < 0) {
+ printk("rs_close: bad serial port count for ttys%d: %d\n",
+ info->line, state->count);
+ state->count = 0;
+ }
+ if (state->count) {
+ DBG_CNT("before DEC-2");
+ local_irq_restore(flags);
+ return;
+ }
+ info->flags |= ASYNC_CLOSING;
+ /*
+ * Now we wait for the transmit buffer to clear; and we notify
+ * the line discipline to only process XON/XOFF characters.
+ */
+ tty->closing = 1;
+ if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE)
+ tty_wait_until_sent(tty, info->closing_wait);
+ /*
+ * At this point we stop accepting input. To do this, we
+ * disable the receive line status interrupts, and tell the
+ * interrupt driver to stop checking the data ready bit in the
+ * line status register.
+ */
+ info->read_status_mask &= ~BD_SC_EMPTY;
+ if (info->flags & ASYNC_INITIALIZED) {
+
+ idx = PORT_NUM(info->state->smc_scc_num);
+ if (info->state->smc_scc_num & NUM_IS_SCC) {
+ sccp = &pquicc->scc_regs[idx];
+ sccp->scc_sccm &= ~UART_SCCM_RX;
+ sccp->scc_gsmr.w.low &= ~SCC_GSMRL_ENR;
+ } else {
+ smcp = &pquicc->smc_regs[idx];
+ smcp->smc_smcm &= ~SMCM_RX;
+ smcp->smc_smcmr &= ~SMCMR_REN;
+ }
+ /*
+ * Before we drop DTR, make sure the UART transmitter
+ * has completely drained; this is especially
+ * important if there is a transmit FIFO!
+ */
+ rs_360_wait_until_sent(tty, info->timeout);
+ }
+ shutdown(info);
+ if (tty->driver->flush_buffer)
+ tty->driver->flush_buffer(tty);
+ tty_ldisc_flush(tty);
+ tty->closing = 0;
+ info->event = 0;
+ info->tty = 0;
+ if (info->blocked_open) {
+ if (info->close_delay) {
+ msleep_interruptible(jiffies_to_msecs(info->close_delay));
+ }
+ wake_up_interruptible(&info->open_wait);
+ }
+ info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+ wake_up_interruptible(&info->close_wait);
+ local_irq_restore(flags);
+}
+
+/*
+ * rs_wait_until_sent() --- wait until the transmitter is empty
+ */
+static void rs_360_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+ ser_info_t *info = (ser_info_t *)tty->driver_data;
+ unsigned long orig_jiffies, char_time;
+ /*int lsr;*/
+ volatile QUICC_BD *bdp;
+
+ if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent"))
+ return;
+
+#ifdef maybe
+ if (info->state->type == PORT_UNKNOWN)
+ return;
+#endif
+
+ orig_jiffies = jiffies;
+ /*
+ * Set the check interval to be 1/5 of the estimated time to
+ * send a single character, and make it at least 1. The check
+ * interval should also be less than the timeout.
+ *
+ * Note: we have to use pretty tight timings here to satisfy
+ * the NIST-PCTS.
+ */
+ char_time = 1;
+ if (timeout)
+ char_time = min(char_time, (unsigned long)timeout);
+#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
+ printk("In rs_wait_until_sent(%d) check=%lu...", timeout, char_time);
+ printk("jiff=%lu...", jiffies);
+#endif
+
+ /* We go through the loop at least once because we can't tell
+ * exactly when the last character exits the shifter. There can
+ * be at least two characters waiting to be sent after the buffers
+ * are empty.
+ */
+ do {
+#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
+ printk("lsr = %d (jiff=%lu)...", lsr, jiffies);
+#endif
+/* current->counter = 0; make us low-priority */
+ msleep_interruptible(jiffies_to_msecs(char_time));
+ if (signal_pending(current))
+ break;
+ if (timeout && ((orig_jiffies + timeout) < jiffies))
+ break;
+ /* The 'tx_cur' is really the next buffer to send. We
+ * have to back up to the previous BD and wait for it
+ * to go. This isn't perfect, because all this indicates
+ * is the buffer is available. There are still characters
+ * in the CPM FIFO.
+ */
+ bdp = info->tx_cur;
+ if (bdp == info->tx_bd_base)
+ bdp += (TX_NUM_FIFO-1);
+ else
+ bdp--;
+ } while (bdp->status & BD_SC_READY);
+ current->state = TASK_RUNNING;
+#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT
+ printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
+#endif
+}
+
+/*
+ * rs_hangup() --- called by tty_hangup() when a hangup is signaled.
+ */
+static void rs_360_hangup(struct tty_struct *tty)
+{
+ ser_info_t *info = (ser_info_t *)tty->driver_data;
+ struct serial_state *state = info->state;
+
+ if (serial_paranoia_check(info, tty->name, "rs_hangup"))
+ return;
+
+ state = info->state;
+
+ rs_360_flush_buffer(tty);
+ shutdown(info);
+ info->event = 0;
+ state->count = 0;
+ info->flags &= ~ASYNC_NORMAL_ACTIVE;
+ info->tty = 0;
+ wake_up_interruptible(&info->open_wait);
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_open() and friends
+ * ------------------------------------------------------------
+ */
+static int block_til_ready(struct tty_struct *tty, struct file * filp,
+ ser_info_t *info)
+{
+#ifdef DO_THIS_LATER
+ DECLARE_WAITQUEUE(wait, current);
+#endif
+ struct serial_state *state = info->state;
+ int retval;
+ int do_clocal = 0;
+
+ /*
+ * If the device is in the middle of being closed, then block
+ * until it's done, and then try again.
+ */
+ if (tty_hung_up_p(filp) ||
+ (info->flags & ASYNC_CLOSING)) {
+ if (info->flags & ASYNC_CLOSING)
+ interruptible_sleep_on(&info->close_wait);
+#ifdef SERIAL_DO_RESTART
+ if (info->flags & ASYNC_HUP_NOTIFY)
+ return -EAGAIN;
+ else
+ return -ERESTARTSYS;
+#else
+ return -EAGAIN;
+#endif
+ }
+
+ /*
+ * If non-blocking mode is set, or the port is not enabled,
+ * then make the check up front and then exit.
+ * If this is an SMC port, we don't have modem control to wait
+ * for, so just get out here.
+ */
+ if ((filp->f_flags & O_NONBLOCK) ||
+ (tty->flags & (1 << TTY_IO_ERROR)) ||
+ !(info->state->smc_scc_num & NUM_IS_SCC)) {
+ info->flags |= ASYNC_NORMAL_ACTIVE;
+ return 0;
+ }
+
+ if (tty->termios->c_cflag & CLOCAL)
+ do_clocal = 1;
+
+ /*
+ * Block waiting for the carrier detect and the line to become
+ * free (i.e., not in use by the callout). While we are in
+ * this loop, state->count is dropped by one, so that
+ * rs_close() knows when to free things. We restore it upon
+ * exit, either normal or abnormal.
+ */
+ retval = 0;
+#ifdef DO_THIS_LATER
+ add_wait_queue(&info->open_wait, &wait);
+#ifdef SERIAL_DEBUG_OPEN
+ printk("block_til_ready before block: ttys%d, count = %d\n",
+ state->line, state->count);
+#endif
+ local_irq_disable();
+ if (!tty_hung_up_p(filp))
+ state->count--;
+ local_irq_enable();
+ info->blocked_open++;
+ while (1) {
+ local_irq_disable();
+ if (tty->termios->c_cflag & CBAUD)
+ serial_out(info, UART_MCR,
+ serial_inp(info, UART_MCR) |
+ (UART_MCR_DTR | UART_MCR_RTS));
+ local_irq_enable();
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (tty_hung_up_p(filp) ||
+ !(info->flags & ASYNC_INITIALIZED)) {
+#ifdef SERIAL_DO_RESTART
+ if (info->flags & ASYNC_HUP_NOTIFY)
+ retval = -EAGAIN;
+ else
+ retval = -ERESTARTSYS;
+#else
+ retval = -EAGAIN;
+#endif
+ break;
+ }
+ if (!(info->flags & ASYNC_CLOSING) &&
+ (do_clocal || (serial_in(info, UART_MSR) &
+ UART_MSR_DCD)))
+ break;
+ if (signal_pending(current)) {
+ retval = -ERESTARTSYS;
+ break;
+ }
+#ifdef SERIAL_DEBUG_OPEN
+ printk("block_til_ready blocking: ttys%d, count = %d\n",
+ info->line, state->count);
+#endif
+ schedule();
+ }
+ current->state = TASK_RUNNING;
+ remove_wait_queue(&info->open_wait, &wait);
+ if (!tty_hung_up_p(filp))
+ state->count++;
+ info->blocked_open--;
+#ifdef SERIAL_DEBUG_OPEN
+ printk("block_til_ready after blocking: ttys%d, count = %d\n",
+ info->line, state->count);
+#endif
+#endif /* DO_THIS_LATER */
+ if (retval)
+ return retval;
+ info->flags |= ASYNC_NORMAL_ACTIVE;
+ return 0;
+}
+
+static int get_async_struct(int line, ser_info_t **ret_info)
+{
+ struct serial_state *sstate;
+
+ sstate = rs_table + line;
+ if (sstate->info) {
+ sstate->count++;
+ *ret_info = (ser_info_t *)sstate->info;
+ return 0;
+ }
+ else {
+ return -ENOMEM;
+ }
+}
+
+/*
+ * This routine is called whenever a serial port is opened. It
+ * enables interrupts for a serial port, linking in its async structure into
+ * the IRQ chain. It also performs the serial-specific
+ * initialization for the tty structure.
+ */
+static int rs_360_open(struct tty_struct *tty, struct file * filp)
+{
+ ser_info_t *info;
+ int retval, line;
+
+ line = tty->index;
+ if ((line < 0) || (line >= NR_PORTS))
+ return -ENODEV;
+ retval = get_async_struct(line, &info);
+ if (retval)
+ return retval;
+ if (serial_paranoia_check(info, tty->name, "rs_open"))
+ return -ENODEV;
+
+#ifdef SERIAL_DEBUG_OPEN
+ printk("rs_open %s, count = %d\n", tty->name, info->state->count);
+#endif
+ tty->driver_data = info;
+ info->tty = tty;
+
+ /*
+ * Start up serial port
+ */
+ retval = startup(info);
+ if (retval)
+ return retval;
+
+ retval = block_til_ready(tty, filp, info);
+ if (retval) {
+#ifdef SERIAL_DEBUG_OPEN
+ printk("rs_open returning after block_til_ready with %d\n",
+ retval);
+#endif
+ return retval;
+ }
+
+#ifdef SERIAL_DEBUG_OPEN
+ printk("rs_open %s successful...", tty->name);
+#endif
+ return 0;
+}
+
+/*
+ * /proc fs routines....
+ */
+
+static inline int line_info(char *buf, struct serial_state *state)
+{
+#ifdef notdef
+ struct async_struct *info = state->info, scr_info;
+ char stat_buf[30], control, status;
+#endif
+ int ret;
+
+ ret = sprintf(buf, "%d: uart:%s port:%X irq:%d",
+ state->line,
+ (state->smc_scc_num & NUM_IS_SCC) ? "SCC" : "SMC",
+ (unsigned int)(state->port), state->irq);
+
+ if (!state->port || (state->type == PORT_UNKNOWN)) {
+ ret += sprintf(buf+ret, "\n");
+ return ret;
+ }
+
+#ifdef notdef
+ /*
+ * Figure out the current RS-232 lines
+ */
+ if (!info) {
+ info = &scr_info; /* This is just for serial_{in,out} */
+
+ info->magic = SERIAL_MAGIC;
+ info->port = state->port;
+ info->flags = state->flags;
+ info->quot = 0;
+ info->tty = 0;
+ }
+ local_irq_disable();
+ status = serial_in(info, UART_MSR);
+ control = info ? info->MCR : serial_in(info, UART_MCR);
+ local_irq_enable();
+
+ stat_buf[0] = 0;
+ stat_buf[1] = 0;
+ if (control & UART_MCR_RTS)
+ strcat(stat_buf, "|RTS");
+ if (status & UART_MSR_CTS)
+ strcat(stat_buf, "|CTS");
+ if (control & UART_MCR_DTR)
+ strcat(stat_buf, "|DTR");
+ if (status & UART_MSR_DSR)
+ strcat(stat_buf, "|DSR");
+ if (status & UART_MSR_DCD)
+ strcat(stat_buf, "|CD");
+ if (status & UART_MSR_RI)
+ strcat(stat_buf, "|RI");
+
+ if (info->quot) {
+ ret += sprintf(buf+ret, " baud:%d",
+ state->baud_base / info->quot);
+ }
+
+ ret += sprintf(buf+ret, " tx:%d rx:%d",
+ state->icount.tx, state->icount.rx);
+
+ if (state->icount.frame)
+ ret += sprintf(buf+ret, " fe:%d", state->icount.frame);
+
+ if (state->icount.parity)
+ ret += sprintf(buf+ret, " pe:%d", state->icount.parity);
+
+ if (state->icount.brk)
+ ret += sprintf(buf+ret, " brk:%d", state->icount.brk);
+
+ if (state->icount.overrun)
+ ret += sprintf(buf+ret, " oe:%d", state->icount.overrun);
+
+ /*
+ * Last thing is the RS-232 status lines
+ */
+ ret += sprintf(buf+ret, " %s\n", stat_buf+1);
+#endif
+ return ret;
+}
+
+int rs_360_read_proc(char *page, char **start, off_t off, int count,
+ int *eof, void *data)
+{
+ int i, len = 0;
+ off_t begin = 0;
+
+ len += sprintf(page, "serinfo:1.0 driver:%s\n", serial_version);
+ for (i = 0; i < NR_PORTS && len < 4000; i++) {
+ len += line_info(page + len, &rs_table[i]);
+ if (len+begin > off+count)
+ goto done;
+ if (len+begin < off) {
+ begin += len;
+ len = 0;
+ }
+ }
+ *eof = 1;
+done:
+ if (off >= len+begin)
+ return 0;
+ *start = page + (begin-off);
+ return ((count < begin+len-off) ? count : begin+len-off);
+}
+
+/*
+ * ---------------------------------------------------------------------
+ * rs_init() and friends
+ *
+ * rs_init() is called at boot-time to initialize the serial driver.
+ * ---------------------------------------------------------------------
+ */
+
+/*
+ * This routine prints out the appropriate serial driver version
+ * number, and identifies which options were configured into this
+ * driver.
+ */
+static _INLINE_ void show_serial_version(void)
+{
+ printk(KERN_INFO "%s version %s\n", serial_name, serial_version);
+}
+
+
+/*
+ * The serial console driver used during boot. Note that these names
+ * clash with those found in "serial.c", so we currently can't support
+ * the 16xxx uarts and these at the same time. I will fix this to become
+ * an indirect function call from tty_io.c (or something).
+ */
+
+#ifdef CONFIG_SERIAL_CONSOLE
+
+/*
+ * Print a string to the serial port trying not to disturb any possible
+ * real use of the port...
+ */
+static void my_console_write(int idx, const char *s,
+ unsigned count)
+{
+ struct serial_state *ser;
+ ser_info_t *info;
+ unsigned i;
+ QUICC_BD *bdp, *bdbase;
+ volatile struct smc_uart_pram *up;
+ volatile u_char *cp;
+
+ ser = rs_table + idx;
+
+
+ /* If the port has been initialized for general use, we have
+ * to use the buffer descriptors allocated there. Otherwise,
+ * we simply use the single buffer allocated.
+ */
+ if ((info = (ser_info_t *)ser->info) != NULL) {
+ bdp = info->tx_cur;
+ bdbase = info->tx_bd_base;
+ }
+ else {
+ /* Pointer to UART in parameter ram.
+ */
+ /* up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; */
+ up = &pquicc->pram[ser->port].scc.pothers.idma_smc.psmc.u;
+
+ /* Get the address of the host memory buffer.
+ */
+ bdp = bdbase = (QUICC_BD *)((uint)pquicc + (uint)up->tbase);
+ }
+
+ /*
+ * We need to gracefully shut down the transmitter, disable
+ * interrupts, then send our bytes out.
+ */
+
+ /*
+ * Now, do each character. This is not as bad as it looks
+ * since this is a holding FIFO and not a transmitting FIFO.
+ * We could add the complexity of filling the entire transmit
+ * buffer, but we would just wait longer between accesses......
+ */
+ for (i = 0; i < count; i++, s++) {
+ /* Wait for transmitter fifo to empty.
+ * Ready indicates output is ready, and xmt is doing
+ * that, not that it is ready for us to send.
+ */
+ while (bdp->status & BD_SC_READY);
+
+ /* Send the character out.
+ */
+ cp = bdp->buf;
+ *cp = *s;
+
+ bdp->length = 1;
+ bdp->status |= BD_SC_READY;
+
+ if (bdp->status & BD_SC_WRAP)
+ bdp = bdbase;
+ else
+ bdp++;
+
+ /* if a LF, also do CR... */
+ if (*s == 10) {
+ while (bdp->status & BD_SC_READY);
+ /* cp = __va(bdp->buf); */
+ cp = bdp->buf;
+ *cp = 13;
+ bdp->length = 1;
+ bdp->status |= BD_SC_READY;
+
+ if (bdp->status & BD_SC_WRAP) {
+ bdp = bdbase;
+ }
+ else {
+ bdp++;
+ }
+ }
+ }
+
+ /*
+ * Finally, Wait for transmitter & holding register to empty
+ * and restore the IER
+ */
+ while (bdp->status & BD_SC_READY);
+
+ if (info)
+ info->tx_cur = (QUICC_BD *)bdp;
+}
+
+static void serial_console_write(struct console *c, const char *s,
+ unsigned count)
+{
+#ifdef CONFIG_KGDB
+ /* Try to let stub handle output. Returns true if it did. */
+ if (kgdb_output_string(s, count))
+ return;
+#endif
+ my_console_write(c->index, s, count);
+}
+
+
+
+/*void console_print_68360(const char *p)
+{
+ const char *cp = p;
+ int i;
+
+ for (i=0;cp[i]!=0;i++);
+
+ serial_console_write (p, i);
+
+ //Comment this if you want to have a strict interrupt-driven output
+ //rs_fair_output();
+
+ return;
+}*/
+
+
+
+
+
+
+#ifdef CONFIG_XMON
+int
+xmon_360_write(const char *s, unsigned count)
+{
+ my_console_write(0, s, count);
+ return(count);
+}
+#endif
+
+#ifdef CONFIG_KGDB
+void
+putDebugChar(char ch)
+{
+ my_console_write(0, &ch, 1);
+}
+#endif
+
+/*
+ * Receive character from the serial port. This only works well
+ * before the port is initialized for real use.
+ */
+static int my_console_wait_key(int idx, int xmon, char *obuf)
+{
+ struct serial_state *ser;
+ u_char c, *cp;
+ ser_info_t *info;
+ QUICC_BD *bdp;
+ volatile struct smc_uart_pram *up;
+ int i;
+
+ ser = rs_table + idx;
+
+ /* Get the address of the host memory buffer.
+ * If the port has been initialized for general use, we must
+ * use information from the port structure.
+ */
+ if ((info = (ser_info_t *)ser->info))
+ bdp = info->rx_cur;
+ else
+ /* bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_rbase]; */
+ bdp = (QUICC_BD *)((uint)pquicc + (uint)up->tbase);
+
+ /* Pointer to UART in parameter ram.
+ */
+ /* up = (smc_uart_t *)&cpmp->cp_dparam[ser->port]; */
+ up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u;
+
+ /*
+ * We need to gracefully shut down the receiver, disable
+ * interrupts, then read the input.
+ * XMON just wants a poll. If no character, return -1, else
+ * return the character.
+ */
+ if (!xmon) {
+ while (bdp->status & BD_SC_EMPTY);
+ }
+ else {
+ if (bdp->status & BD_SC_EMPTY)
+ return -1;
+ }
+
+ cp = (char *)bdp->buf;
+
+ if (obuf) {
+ i = c = bdp->length;
+ while (i-- > 0)
+ *obuf++ = *cp++;
+ }
+ else {
+ c = *cp;
+ }
+ bdp->status |= BD_SC_EMPTY;
+
+ if (info) {
+ if (bdp->status & BD_SC_WRAP) {
+ bdp = info->rx_bd_base;
+ }
+ else {
+ bdp++;
+ }
+ info->rx_cur = (QUICC_BD *)bdp;
+ }
+
+ return((int)c);
+}
+
+static int serial_console_wait_key(struct console *co)
+{
+ return(my_console_wait_key(co->index, 0, NULL));
+}
+
+#ifdef CONFIG_XMON
+int
+xmon_360_read_poll(void)
+{
+ return(my_console_wait_key(0, 1, NULL));
+}
+
+int
+xmon_360_read_char(void)
+{
+ return(my_console_wait_key(0, 0, NULL));
+}
+#endif
+
+#ifdef CONFIG_KGDB
+static char kgdb_buf[RX_BUF_SIZE], *kgdp;
+static int kgdb_chars;
+
+unsigned char
+getDebugChar(void)
+{
+ if (kgdb_chars <= 0) {
+ kgdb_chars = my_console_wait_key(0, 0, kgdb_buf);
+ kgdp = kgdb_buf;
+ }
+ kgdb_chars--;
+
+ return(*kgdp++);
+}
+
+void kgdb_interruptible(int state)
+{
+}
+void kgdb_map_scc(void)
+{
+ struct serial_state *ser;
+ uint mem_addr;
+ volatile QUICC_BD *bdp;
+ volatile smc_uart_t *up;
+
+ cpmp = (cpm360_t *)&(((immap_t *)IMAP_ADDR)->im_cpm);
+
+ /* To avoid data cache CPM DMA coherency problems, allocate a
+ * buffer in the CPM DPRAM. This will work until the CPM and
+ * serial ports are initialized. At that time a memory buffer
+ * will be allocated.
+ * The port is already initialized from the boot procedure, all
+ * we do here is give it a different buffer and make it a FIFO.
+ */
+
+ ser = rs_table;
+
+ /* Right now, assume we are using SMCs.
+ */
+ up = (smc_uart_t *)&cpmp->cp_dparam[ser->port];
+
+ /* Allocate space for an input FIFO, plus a few bytes for output.
+ * Allocate bytes to maintain word alignment.
+ */
+ mem_addr = (uint)(&cpmp->cp_dpmem[0x1000]);
+
+ /* Set the physical address of the host memory buffers in
+ * the buffer descriptors.
+ */
+ bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_rbase];
+ bdp->buf = mem_addr;
+
+ bdp = (QUICC_BD *)&cpmp->cp_dpmem[up->smc_tbase];
+ bdp->buf = mem_addr+RX_BUF_SIZE;
+
+ up->smc_mrblr = RX_BUF_SIZE; /* receive buffer length */
+ up->smc_maxidl = RX_BUF_SIZE;
+}
+#endif
+
+static struct tty_struct *serial_console_device(struct console *c, int *index)
+{
+ *index = c->index;
+ return serial_driver;
+}
+
+
+struct console sercons = {
+ .name = "ttyS",
+ .write = serial_console_write,
+ .device = serial_console_device,
+ .wait_key = serial_console_wait_key,
+ .setup = serial_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = CONFIG_SERIAL_CONSOLE_PORT,
+};
+
+
+
+/*
+ * Register console.
+ */
+long console_360_init(long kmem_start, long kmem_end)
+{
+ register_console(&sercons);
+ /*register_console (console_print_68360); - 2.0.38 only required a write
+ function pointer. */
+ return kmem_start;
+}
+
+#endif
+
+/* Index in baud rate table of the default console baud rate.
+*/
+static int baud_idx;
+
+static struct tty_operations rs_360_ops = {
+ .owner = THIS_MODULE,
+ .open = rs_360_open,
+ .close = rs_360_close,
+ .write = rs_360_write,
+ .put_char = rs_360_put_char,
+ .write_room = rs_360_write_room,
+ .chars_in_buffer = rs_360_chars_in_buffer,
+ .flush_buffer = rs_360_flush_buffer,
+ .ioctl = rs_360_ioctl,
+ .throttle = rs_360_throttle,
+ .unthrottle = rs_360_unthrottle,
+ /* .send_xchar = rs_360_send_xchar, */
+ .set_termios = rs_360_set_termios,
+ .stop = rs_360_stop,
+ .start = rs_360_start,
+ .hangup = rs_360_hangup,
+ /* .wait_until_sent = rs_360_wait_until_sent, */
+ /* .read_proc = rs_360_read_proc, */
+ .tiocmget = rs_360_tiocmget,
+ .tiocmset = rs_360_tiocmset,
+};
+
+/* int __init rs_360_init(void) */
+int rs_360_init(void)
+{
+ struct serial_state * state;
+ ser_info_t *info;
+ void *mem_addr;
+ uint dp_addr, iobits;
+ int i, j, idx;
+ ushort chan;
+ QUICC_BD *bdp;
+ volatile QUICC *cp;
+ volatile struct smc_regs *sp;
+ volatile struct smc_uart_pram *up;
+ volatile struct scc_regs *scp;
+ volatile struct uart_pram *sup;
+ /* volatile immap_t *immap; */
+
+ serial_driver = alloc_tty_driver(NR_PORTS);
+ if (!serial_driver)
+ return -1;
+
+ show_serial_version();
+
+ serial_driver->name = "ttyS";
+ serial_driver->major = TTY_MAJOR;
+ serial_driver->minor_start = 64;
+ serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
+ serial_driver->subtype = SERIAL_TYPE_NORMAL;
+ serial_driver->init_termios = tty_std_termios;
+ serial_driver->init_termios.c_cflag =
+ baud_idx | CS8 | CREAD | HUPCL | CLOCAL;
+ serial_driver->flags = TTY_DRIVER_REAL_RAW;
+ tty_set_operations(serial_driver, &rs_360_ops);
+
+ if (tty_register_driver(serial_driver))
+ panic("Couldn't register serial driver\n");
+
+ cp = pquicc; /* Get pointer to Communication Processor */
+ /* immap = (immap_t *)IMAP_ADDR; */ /* and to internal registers */
+
+
+ /* Configure SCC2, SCC3, and SCC4 instead of port A parallel I/O.
+ */
+ /* The "standard" configuration through the 860.
+ */
+/* immap->im_ioport.iop_papar |= 0x00fc; */
+/* immap->im_ioport.iop_padir &= ~0x00fc; */
+/* immap->im_ioport.iop_paodr &= ~0x00fc; */
+ cp->pio_papar |= 0x00fc;
+ cp->pio_padir &= ~0x00fc;
+ /* cp->pio_paodr &= ~0x00fc; */
+
+
+ /* Since we don't yet do modem control, connect the port C pins
+ * as general purpose I/O. This will assert CTS and CD for the
+ * SCC ports.
+ */
+ /* FIXME: see 360um p.7-365 and 860um p.34-12
+ * I can't make sense of these bits - mleslie*/
+/* immap->im_ioport.iop_pcdir |= 0x03c6; */
+/* immap->im_ioport.iop_pcpar &= ~0x03c6; */
+
+/* cp->pio_pcdir |= 0x03c6; */
+/* cp->pio_pcpar &= ~0x03c6; */
+
+
+
+ /* Connect SCC2 and SCC3 to NMSI. Connect BRG3 to SCC2 and
+ * BRG4 to SCC3.
+ */
+ cp->si_sicr &= ~0x00ffff00;
+ cp->si_sicr |= 0x001b1200;
+
+#ifdef CONFIG_PP04
+ /* Frequentis PP04 forced to RS-232 until we know better.
+ * Port C 12 and 13 low enables RS-232 on SCC3 and SCC4.
+ */
+ immap->im_ioport.iop_pcdir |= 0x000c;
+ immap->im_ioport.iop_pcpar &= ~0x000c;
+ immap->im_ioport.iop_pcdat &= ~0x000c;
+
+ /* This enables the TX driver.
+ */
+ cp->cp_pbpar &= ~0x6000;
+ cp->cp_pbdat &= ~0x6000;
+#endif
+
+ for (i = 0, state = rs_table; i < NR_PORTS; i++,state++) {
+ state->magic = SSTATE_MAGIC;
+ state->line = i;
+ state->type = PORT_UNKNOWN;
+ state->custom_divisor = 0;
+ state->close_delay = 5*HZ/10;
+ state->closing_wait = 30*HZ;
+ state->icount.cts = state->icount.dsr =
+ state->icount.rng = state->icount.dcd = 0;
+ state->icount.rx = state->icount.tx = 0;
+ state->icount.frame = state->icount.parity = 0;
+ state->icount.overrun = state->icount.brk = 0;
+ printk(KERN_INFO "ttyS%d at irq 0x%02x is an %s\n",
+ i, (unsigned int)(state->irq),
+ (state->smc_scc_num & NUM_IS_SCC) ? "SCC" : "SMC");
+
+#ifdef CONFIG_SERIAL_CONSOLE
+ /* If we just printed the message on the console port, and
+ * we are about to initialize it for general use, we have
+ * to wait a couple of character times for the CR/NL to
+ * make it out of the transmit buffer.
+ */
+ if (i == CONFIG_SERIAL_CONSOLE_PORT)
+ mdelay(8);
+
+
+/* idx = PORT_NUM(info->state->smc_scc_num); */
+/* if (info->state->smc_scc_num & NUM_IS_SCC) */
+/* chan = scc_chan_map[idx]; */
+/* else */
+/* chan = smc_chan_map[idx]; */
+
+/* cp->cp_cr = mk_cr_cmd(chan, CPM_CR_STOP_TX) | CPM_CR_FLG; */
+/* while (cp->cp_cr & CPM_CR_FLG); */
+
+#endif
+ /* info = kmalloc(sizeof(ser_info_t), GFP_KERNEL); */
+ info = &quicc_ser_info[i];
+ if (info) {
+ memset (info, 0, sizeof(ser_info_t));
+ info->magic = SERIAL_MAGIC;
+ info->line = i;
+ info->flags = state->flags;
+ INIT_WORK(&info->tqueue, do_softint, info);
+ INIT_WORK(&info->tqueue_hangup, do_serial_hangup, info);
+ init_waitqueue_head(&info->open_wait);
+ init_waitqueue_head(&info->close_wait);
+ info->state = state;
+ state->info = (struct async_struct *)info;
+
+ /* We need to allocate a transmit and receive buffer
+ * descriptors from dual port ram, and a character
+ * buffer area from host mem.
+ */
+ dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * RX_NUM_FIFO);
+
+ /* Allocate space for FIFOs in the host memory.
+ * (for now this is from a static array of buffers :(
+ */
+ /* mem_addr = m360_cpm_hostalloc(RX_NUM_FIFO * RX_BUF_SIZE); */
+ /* mem_addr = kmalloc (RX_NUM_FIFO * RX_BUF_SIZE, GFP_BUFFER); */
+ mem_addr = &rx_buf_pool[i * RX_NUM_FIFO * RX_BUF_SIZE];
+
+ /* Set the physical address of the host memory
+ * buffers in the buffer descriptors, and the
+ * virtual address for us to work with.
+ */
+ bdp = (QUICC_BD *)((uint)pquicc + dp_addr);
+ info->rx_cur = info->rx_bd_base = bdp;
+
+ /* initialize rx buffer descriptors */
+ for (j=0; j<(RX_NUM_FIFO-1); j++) {
+ bdp->buf = &rx_buf_pool[(i * RX_NUM_FIFO + j ) * RX_BUF_SIZE];
+ bdp->status = BD_SC_EMPTY | BD_SC_INTRPT;
+ mem_addr += RX_BUF_SIZE;
+ bdp++;
+ }
+ bdp->buf = &rx_buf_pool[(i * RX_NUM_FIFO + j ) * RX_BUF_SIZE];
+ bdp->status = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT;
+
+
+ idx = PORT_NUM(info->state->smc_scc_num);
+ if (info->state->smc_scc_num & NUM_IS_SCC) {
+
+#if defined (CONFIG_UCQUICC) && 1
+ /* set the transceiver mode to RS232 */
+ sipex_mode_bits &= ~(uint)SIPEX_MODE(idx,0x0f); /* clear current mode */
+ sipex_mode_bits |= (uint)SIPEX_MODE(idx,0x02);
+ *(uint *)_periph_base = sipex_mode_bits;
+ /* printk ("sipex bits = 0x%08x\n", sipex_mode_bits); */
+#endif
+ }
+
+ dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * TX_NUM_FIFO);
+
+ /* Allocate space for FIFOs in the host memory.
+ */
+ /* mem_addr = m360_cpm_hostalloc(TX_NUM_FIFO * TX_BUF_SIZE); */
+ /* mem_addr = kmalloc (TX_NUM_FIFO * TX_BUF_SIZE, GFP_BUFFER); */
+ mem_addr = &tx_buf_pool[i * TX_NUM_FIFO * TX_BUF_SIZE];
+
+ /* Set the physical address of the host memory
+ * buffers in the buffer descriptors, and the
+ * virtual address for us to work with.
+ */
+ /* bdp = (QUICC_BD *)&cp->cp_dpmem[dp_addr]; */
+ bdp = (QUICC_BD *)((uint)pquicc + dp_addr);
+ info->tx_cur = info->tx_bd_base = (QUICC_BD *)bdp;
+
+ /* initialize tx buffer descriptors */
+ for (j=0; j<(TX_NUM_FIFO-1); j++) {
+ bdp->buf = &tx_buf_pool[(i * TX_NUM_FIFO + j ) * TX_BUF_SIZE];
+ bdp->status = BD_SC_INTRPT;
+ mem_addr += TX_BUF_SIZE;
+ bdp++;
+ }
+ bdp->buf = &tx_buf_pool[(i * TX_NUM_FIFO + j ) * TX_BUF_SIZE];
+ bdp->status = (BD_SC_WRAP | BD_SC_INTRPT);
+
+ if (info->state->smc_scc_num & NUM_IS_SCC) {
+ scp = &pquicc->scc_regs[idx];
+ sup = &pquicc->pram[info->state->port].scc.pscc.u;
+ sup->rbase = dp_addr;
+ sup->tbase = dp_addr;
+
+ /* Set up the uart parameters in the
+ * parameter ram.
+ */
+ sup->rfcr = SMC_EB;
+ sup->tfcr = SMC_EB;
+
+ /* Set this to 1 for now, so we get single
+ * character interrupts. Using idle charater
+ * time requires some additional tuning.
+ */
+ sup->mrblr = 1;
+ sup->max_idl = 0;
+ sup->brkcr = 1;
+ sup->parec = 0;
+ sup->frmer = 0;
+ sup->nosec = 0;
+ sup->brkec = 0;
+ sup->uaddr1 = 0;
+ sup->uaddr2 = 0;
+ sup->toseq = 0;
+ {
+ int i;
+ for (i=0;i<8;i++)
+ sup->cc[i] = 0x8000;
+ }
+ sup->rccm = 0xc0ff;
+
+ /* Send the CPM an initialize command.
+ */
+ chan = scc_chan_map[idx];
+
+ /* execute the INIT RX & TX PARAMS command for this channel. */
+ cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+ while (cp->cp_cr & CPM_CR_FLG);
+
+ /* Set UART mode, 8 bit, no parity, one stop.
+ * Enable receive and transmit.
+ */
+ scp->scc_gsmr.w.high = 0;
+ scp->scc_gsmr.w.low =
+ (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
+
+ /* Disable all interrupts and clear all pending
+ * events.
+ */
+ scp->scc_sccm = 0;
+ scp->scc_scce = 0xffff;
+ scp->scc_dsr = 0x7e7e;
+ scp->scc_psmr = 0x3000;
+
+ /* If the port is the console, enable Rx and Tx.
+ */
+#ifdef CONFIG_SERIAL_CONSOLE
+ if (i == CONFIG_SERIAL_CONSOLE_PORT)
+ scp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+#endif
+ }
+ else {
+ /* Configure SMCs Tx/Rx instead of port B
+ * parallel I/O.
+ */
+ up = &pquicc->pram[info->state->port].scc.pothers.idma_smc.psmc.u;
+ up->rbase = dp_addr;
+
+ iobits = 0xc0 << (idx * 4);
+ cp->pip_pbpar |= iobits;
+ cp->pip_pbdir &= ~iobits;
+ cp->pip_pbodr &= ~iobits;
+
+
+ /* Connect the baud rate generator to the
+ * SMC based upon index in rs_table. Also
+ * make sure it is connected to NMSI.
+ */
+ cp->si_simode &= ~(0xffff << (idx * 16));
+ cp->si_simode |= (i << ((idx * 16) + 12));
+
+ up->tbase = dp_addr;
+
+ /* Set up the uart parameters in the
+ * parameter ram.
+ */
+ up->rfcr = SMC_EB;
+ up->tfcr = SMC_EB;
+
+ /* Set this to 1 for now, so we get single
+ * character interrupts. Using idle charater
+ * time requires some additional tuning.
+ */
+ up->mrblr = 1;
+ up->max_idl = 0;
+ up->brkcr = 1;
+
+ /* Send the CPM an initialize command.
+ */
+ chan = smc_chan_map[idx];
+
+ cp->cp_cr = mk_cr_cmd(chan,
+ CPM_CR_INIT_TRX) | CPM_CR_FLG;
+#ifdef CONFIG_SERIAL_CONSOLE
+ if (i == CONFIG_SERIAL_CONSOLE_PORT)
+ printk("");
+#endif
+ while (cp->cp_cr & CPM_CR_FLG);
+
+ /* Set UART mode, 8 bit, no parity, one stop.
+ * Enable receive and transmit.
+ */
+ sp = &cp->smc_regs[idx];
+ sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
+
+ /* Disable all interrupts and clear all pending
+ * events.
+ */
+ sp->smc_smcm = 0;
+ sp->smc_smce = 0xff;
+
+ /* If the port is the console, enable Rx and Tx.
+ */
+#ifdef CONFIG_SERIAL_CONSOLE
+ if (i == CONFIG_SERIAL_CONSOLE_PORT)
+ sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
+#endif
+ }
+
+ /* Install interrupt handler.
+ */
+ /* cpm_install_handler(IRQ_MACHSPEC | state->irq, rs_360_interrupt, info); */
+ /*request_irq(IRQ_MACHSPEC | state->irq, rs_360_interrupt, */
+ request_irq(state->irq, rs_360_interrupt,
+ IRQ_FLG_LOCK, "ttyS", (void *)info);
+
+ /* Set up the baud rate generator.
+ */
+ m360_cpm_setbrg(i, baud_table[baud_idx]);
+
+ }
+ }
+
+ return 0;
+}
+
+
+
+
+
+/* This must always be called before the rs_360_init() function, otherwise
+ * it blows away the port control information.
+ */
+//static int __init serial_console_setup( struct console *co, char *options)
+int serial_console_setup( struct console *co, char *options)
+{
+ struct serial_state *ser;
+ uint mem_addr, dp_addr, bidx, idx, iobits;
+ ushort chan;
+ QUICC_BD *bdp;
+ volatile QUICC *cp;
+ volatile struct smc_regs *sp;
+ volatile struct scc_regs *scp;
+ volatile struct smc_uart_pram *up;
+ volatile struct uart_pram *sup;
+
+/* mleslie TODO:
+ * add something to the 68k bootloader to store a desired initial console baud rate */
+
+/* bd_t *bd; */ /* a board info struct used by EPPC-bug */
+/* bd = (bd_t *)__res; */
+
+ for (bidx = 0; bidx < (sizeof(baud_table) / sizeof(int)); bidx++)
+ /* if (bd->bi_baudrate == baud_table[bidx]) */
+ if (CONSOLE_BAUDRATE == baud_table[bidx])
+ break;
+
+ /* co->cflag = CREAD|CLOCAL|bidx|CS8; */
+ baud_idx = bidx;
+
+ ser = rs_table + CONFIG_SERIAL_CONSOLE_PORT;
+
+ cp = pquicc; /* Get pointer to Communication Processor */
+
+ idx = PORT_NUM(ser->smc_scc_num);
+ if (ser->smc_scc_num & NUM_IS_SCC) {
+
+ /* TODO: need to set up SCC pin assignment etc. here */
+
+ }
+ else {
+ iobits = 0xc0 << (idx * 4);
+ cp->pip_pbpar |= iobits;
+ cp->pip_pbdir &= ~iobits;
+ cp->pip_pbodr &= ~iobits;
+
+ /* Connect the baud rate generator to the
+ * SMC based upon index in rs_table. Also
+ * make sure it is connected to NMSI.
+ */
+ cp->si_simode &= ~(0xffff << (idx * 16));
+ cp->si_simode |= (idx << ((idx * 16) + 12));
+ }
+
+ /* When we get here, the CPM has been reset, so we need
+ * to configure the port.
+ * We need to allocate a transmit and receive buffer descriptor
+ * from dual port ram, and a character buffer area from host mem.
+ */
+
+ /* Allocate space for two buffer descriptors in the DP ram.
+ */
+ dp_addr = m360_cpm_dpalloc(sizeof(QUICC_BD) * CONSOLE_NUM_FIFO);
+
+ /* Allocate space for two 2 byte FIFOs in the host memory.
+ */
+ /* mem_addr = m360_cpm_hostalloc(8); */
+ mem_addr = (uint)console_fifos;
+
+
+ /* Set the physical address of the host memory buffers in
+ * the buffer descriptors.
+ */
+ /* bdp = (QUICC_BD *)&cp->cp_dpmem[dp_addr]; */
+ bdp = (QUICC_BD *)((uint)pquicc + dp_addr);
+ bdp->buf = (char *)mem_addr;
+ (bdp+1)->buf = (char *)(mem_addr+4);
+
+ /* For the receive, set empty and wrap.
+ * For transmit, set wrap.
+ */
+ bdp->status = BD_SC_EMPTY | BD_SC_WRAP;
+ (bdp+1)->status = BD_SC_WRAP;
+
+ /* Set up the uart parameters in the parameter ram.
+ */
+ if (ser->smc_scc_num & NUM_IS_SCC) {
+ scp = &cp->scc_regs[idx];
+ /* sup = (scc_uart_t *)&cp->cp_dparam[ser->port]; */
+ sup = &pquicc->pram[ser->port].scc.pscc.u;
+
+ sup->rbase = dp_addr;
+ sup->tbase = dp_addr + sizeof(QUICC_BD);
+
+ /* Set up the uart parameters in the
+ * parameter ram.
+ */
+ sup->rfcr = SMC_EB;
+ sup->tfcr = SMC_EB;
+
+ /* Set this to 1 for now, so we get single
+ * character interrupts. Using idle charater
+ * time requires some additional tuning.
+ */
+ sup->mrblr = 1;
+ sup->max_idl = 0;
+ sup->brkcr = 1;
+ sup->parec = 0;
+ sup->frmer = 0;
+ sup->nosec = 0;
+ sup->brkec = 0;
+ sup->uaddr1 = 0;
+ sup->uaddr2 = 0;
+ sup->toseq = 0;
+ {
+ int i;
+ for (i=0;i<8;i++)
+ sup->cc[i] = 0x8000;
+ }
+ sup->rccm = 0xc0ff;
+
+ /* Send the CPM an initialize command.
+ */
+ chan = scc_chan_map[idx];
+
+ cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+ while (cp->cp_cr & CPM_CR_FLG);
+
+ /* Set UART mode, 8 bit, no parity, one stop.
+ * Enable receive and transmit.
+ */
+ scp->scc_gsmr.w.high = 0;
+ scp->scc_gsmr.w.low =
+ (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
+
+ /* Disable all interrupts and clear all pending
+ * events.
+ */
+ scp->scc_sccm = 0;
+ scp->scc_scce = 0xffff;
+ scp->scc_dsr = 0x7e7e;
+ scp->scc_psmr = 0x3000;
+
+ scp->scc_gsmr.w.low |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+ }
+ else {
+ /* up = (smc_uart_t *)&cp->cp_dparam[ser->port]; */
+ up = &pquicc->pram[ser->port].scc.pothers.idma_smc.psmc.u;
+
+ up->rbase = dp_addr; /* Base of receive buffer desc. */
+ up->tbase = dp_addr+sizeof(QUICC_BD); /* Base of xmt buffer desc. */
+ up->rfcr = SMC_EB;
+ up->tfcr = SMC_EB;
+
+ /* Set this to 1 for now, so we get single character interrupts.
+ */
+ up->mrblr = 1; /* receive buffer length */
+ up->max_idl = 0; /* wait forever for next char */
+
+ /* Send the CPM an initialize command.
+ */
+ chan = smc_chan_map[idx];
+ cp->cp_cr = mk_cr_cmd(chan, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+ while (cp->cp_cr & CPM_CR_FLG);
+
+ /* Set UART mode, 8 bit, no parity, one stop.
+ * Enable receive and transmit.
+ */
+ sp = &cp->smc_regs[idx];
+ sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
+
+ /* And finally, enable Rx and Tx.
+ */
+ sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
+ }
+
+ /* Set up the baud rate generator.
+ */
+ /* m360_cpm_setbrg((ser - rs_table), bd->bi_baudrate); */
+ m360_cpm_setbrg((ser - rs_table), CONSOLE_BAUDRATE);
+
+ return 0;
+}
+
+/*
+ * Local variables:
+ * c-indent-level: 4
+ * c-basic-offset: 4
+ * tab-width: 4
+ * End:
+ */
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
new file mode 100644
index 00000000000..201c3b9924f
--- /dev/null
+++ b/drivers/serial/8250.c
@@ -0,0 +1,2632 @@
+/*
+ * linux/drivers/char/8250.c
+ *
+ * Driver for 8250/16550-type serial ports
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ * Copyright (C) 2001 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * $Id: 8250.c,v 1.90 2002/07/28 10:03:27 rmk Exp $
+ *
+ * A note about mapbase / membase
+ *
+ * mapbase is the physical address of the IO port.
+ * membase is an 'ioremapped' cookie.
+ */
+#include <linux/config.h>
+
+#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/mca.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include "8250.h"
+
+/*
+ * Configuration:
+ * share_irqs - whether we pass SA_SHIRQ to request_irq(). This option
+ * is unsafe when used on edge-triggered interrupts.
+ */
+unsigned int share_irqs = SERIAL8250_SHARE_IRQS;
+
+/*
+ * Debugging.
+ */
+#if 0
+#define DEBUG_AUTOCONF(fmt...) printk(fmt)
+#else
+#define DEBUG_AUTOCONF(fmt...) do { } while (0)
+#endif
+
+#if 0
+#define DEBUG_INTR(fmt...) printk(fmt)
+#else
+#define DEBUG_INTR(fmt...) do { } while (0)
+#endif
+
+#define PASS_LIMIT 256
+
+/*
+ * We default to IRQ0 for the "no irq" hack. Some
+ * machine types want others as well - they're free
+ * to redefine this in their header file.
+ */
+#define is_real_interrupt(irq) ((irq) != 0)
+
+/*
+ * This converts from our new CONFIG_ symbols to the symbols
+ * that asm/serial.h expects. You _NEED_ to comment out the
+ * linux/config.h include contained inside asm/serial.h for
+ * this to work.
+ */
+#undef CONFIG_SERIAL_MANY_PORTS
+#undef CONFIG_SERIAL_DETECT_IRQ
+#undef CONFIG_SERIAL_MULTIPORT
+#undef CONFIG_HUB6
+
+#ifdef CONFIG_SERIAL_8250_DETECT_IRQ
+#define CONFIG_SERIAL_DETECT_IRQ 1
+#endif
+#ifdef CONFIG_SERIAL_8250_MULTIPORT
+#define CONFIG_SERIAL_MULTIPORT 1
+#endif
+#ifdef CONFIG_SERIAL_8250_MANY_PORTS
+#define CONFIG_SERIAL_MANY_PORTS 1
+#endif
+
+/*
+ * HUB6 is always on. This will be removed once the header
+ * files have been cleaned.
+ */
+#define CONFIG_HUB6 1
+
+#include <asm/serial.h>
+
+/*
+ * SERIAL_PORT_DFNS tells us about built-in ports that have no
+ * standard enumeration mechanism. Platforms that can find all
+ * serial ports via mechanisms like ACPI or PCI need not supply it.
+ */
+#ifndef SERIAL_PORT_DFNS
+#define SERIAL_PORT_DFNS
+#endif
+
+static struct old_serial_port old_serial_port[] = {
+ SERIAL_PORT_DFNS /* defined in asm/serial.h */
+};
+
+#define UART_NR (ARRAY_SIZE(old_serial_port) + CONFIG_SERIAL_8250_NR_UARTS)
+
+#ifdef CONFIG_SERIAL_8250_RSA
+
+#define PORT_RSA_MAX 4
+static unsigned long probe_rsa[PORT_RSA_MAX];
+static unsigned int probe_rsa_count;
+#endif /* CONFIG_SERIAL_8250_RSA */
+
+struct uart_8250_port {
+ struct uart_port port;
+ struct timer_list timer; /* "no irq" timer */
+ struct list_head list; /* ports on this IRQ */
+ unsigned int capabilities; /* port capabilities */
+ unsigned int tx_loadsz; /* transmit fifo load size */
+ unsigned short rev;
+ unsigned char acr;
+ unsigned char ier;
+ unsigned char lcr;
+ unsigned char mcr;
+ unsigned char mcr_mask; /* mask of user bits */
+ unsigned char mcr_force; /* mask of forced bits */
+ unsigned char lsr_break_flag;
+
+ /*
+ * We provide a per-port pm hook.
+ */
+ void (*pm)(struct uart_port *port,
+ unsigned int state, unsigned int old);
+};
+
+struct irq_info {
+ spinlock_t lock;
+ struct list_head *head;
+};
+
+static struct irq_info irq_lists[NR_IRQS];
+
+/*
+ * Here we define the default xmit fifo size used for each type of UART.
+ */
+static const struct serial8250_config uart_config[] = {
+ [PORT_UNKNOWN] = {
+ .name = "unknown",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_8250] = {
+ .name = "8250",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_16450] = {
+ .name = "16450",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_16550] = {
+ .name = "16550",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_16550A] = {
+ .name = "16550A",
+ .fifo_size = 16,
+ .tx_loadsz = 16,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO,
+ },
+ [PORT_CIRRUS] = {
+ .name = "Cirrus",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_16650] = {
+ .name = "ST16650",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
+ },
+ [PORT_16650V2] = {
+ .name = "ST16650V2",
+ .fifo_size = 32,
+ .tx_loadsz = 16,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
+ UART_FCR_T_TRIG_00,
+ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
+ },
+ [PORT_16750] = {
+ .name = "TI16750",
+ .fifo_size = 64,
+ .tx_loadsz = 64,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
+ UART_FCR7_64BYTE,
+ .flags = UART_CAP_FIFO | UART_CAP_SLEEP | UART_CAP_AFE,
+ },
+ [PORT_STARTECH] = {
+ .name = "Startech",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_16C950] = {
+ .name = "16C950/954",
+ .fifo_size = 128,
+ .tx_loadsz = 128,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO,
+ },
+ [PORT_16654] = {
+ .name = "ST16654",
+ .fifo_size = 64,
+ .tx_loadsz = 32,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
+ UART_FCR_T_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
+ },
+ [PORT_16850] = {
+ .name = "XR16850",
+ .fifo_size = 128,
+ .tx_loadsz = 128,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
+ },
+ [PORT_RSA] = {
+ .name = "RSA",
+ .fifo_size = 2048,
+ .tx_loadsz = 2048,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11,
+ .flags = UART_CAP_FIFO,
+ },
+ [PORT_NS16550A] = {
+ .name = "NS16550A",
+ .fifo_size = 16,
+ .tx_loadsz = 16,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_NATSEMI,
+ },
+ [PORT_XSCALE] = {
+ .name = "XScale",
+ .fifo_size = 32,
+ .tx_loadsz = 32,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_UUE,
+ },
+};
+
+static _INLINE_ unsigned int serial_in(struct uart_8250_port *up, int offset)
+{
+ offset <<= up->port.regshift;
+
+ switch (up->port.iotype) {
+ case UPIO_HUB6:
+ outb(up->port.hub6 - 1 + offset, up->port.iobase);
+ return inb(up->port.iobase + 1);
+
+ case UPIO_MEM:
+ return readb(up->port.membase + offset);
+
+ case UPIO_MEM32:
+ return readl(up->port.membase + offset);
+
+ default:
+ return inb(up->port.iobase + offset);
+ }
+}
+
+static _INLINE_ void
+serial_out(struct uart_8250_port *up, int offset, int value)
+{
+ offset <<= up->port.regshift;
+
+ switch (up->port.iotype) {
+ case UPIO_HUB6:
+ outb(up->port.hub6 - 1 + offset, up->port.iobase);
+ outb(value, up->port.iobase + 1);
+ break;
+
+ case UPIO_MEM:
+ writeb(value, up->port.membase + offset);
+ break;
+
+ case UPIO_MEM32:
+ writel(value, up->port.membase + offset);
+ break;
+
+ default:
+ outb(value, up->port.iobase + offset);
+ }
+}
+
+/*
+ * We used to support using pause I/O for certain machines. We
+ * haven't supported this for a while, but just in case it's badly
+ * needed for certain old 386 machines, I've left these #define's
+ * in....
+ */
+#define serial_inp(up, offset) serial_in(up, offset)
+#define serial_outp(up, offset, value) serial_out(up, offset, value)
+
+
+/*
+ * For the 16C950
+ */
+static void serial_icr_write(struct uart_8250_port *up, int offset, int value)
+{
+ serial_out(up, UART_SCR, offset);
+ serial_out(up, UART_ICR, value);
+}
+
+static unsigned int serial_icr_read(struct uart_8250_port *up, int offset)
+{
+ unsigned int value;
+
+ serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD);
+ serial_out(up, UART_SCR, offset);
+ value = serial_in(up, UART_ICR);
+ serial_icr_write(up, UART_ACR, up->acr);
+
+ return value;
+}
+
+/*
+ * FIFO support.
+ */
+static inline void serial8250_clear_fifos(struct uart_8250_port *p)
+{
+ if (p->capabilities & UART_CAP_FIFO) {
+ serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO);
+ serial_outp(p, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+ serial_outp(p, UART_FCR, 0);
+ }
+}
+
+/*
+ * IER sleep support. UARTs which have EFRs need the "extended
+ * capability" bit enabled. Note that on XR16C850s, we need to
+ * reset LCR to write to IER.
+ */
+static inline void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
+{
+ if (p->capabilities & UART_CAP_SLEEP) {
+ if (p->capabilities & UART_CAP_EFR) {
+ serial_outp(p, UART_LCR, 0xBF);
+ serial_outp(p, UART_EFR, UART_EFR_ECB);
+ serial_outp(p, UART_LCR, 0);
+ }
+ serial_outp(p, UART_IER, sleep ? UART_IERX_SLEEP : 0);
+ if (p->capabilities & UART_CAP_EFR) {
+ serial_outp(p, UART_LCR, 0xBF);
+ serial_outp(p, UART_EFR, 0);
+ serial_outp(p, UART_LCR, 0);
+ }
+ }
+}
+
+#ifdef CONFIG_SERIAL_8250_RSA
+/*
+ * Attempts to turn on the RSA FIFO. Returns zero on failure.
+ * We set the port uart clock rate if we succeed.
+ */
+static int __enable_rsa(struct uart_8250_port *up)
+{
+ unsigned char mode;
+ int result;
+
+ mode = serial_inp(up, UART_RSA_MSR);
+ result = mode & UART_RSA_MSR_FIFO;
+
+ if (!result) {
+ serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);
+ mode = serial_inp(up, UART_RSA_MSR);
+ result = mode & UART_RSA_MSR_FIFO;
+ }
+
+ if (result)
+ up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16;
+
+ return result;
+}
+
+static void enable_rsa(struct uart_8250_port *up)
+{
+ if (up->port.type == PORT_RSA) {
+ if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) {
+ spin_lock_irq(&up->port.lock);
+ __enable_rsa(up);
+ spin_unlock_irq(&up->port.lock);
+ }
+ if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16)
+ serial_outp(up, UART_RSA_FRR, 0);
+ }
+}
+
+/*
+ * Attempts to turn off the RSA FIFO. Returns zero on failure.
+ * It is unknown why interrupts were disabled in here. However,
+ * the caller is expected to preserve this behaviour by grabbing
+ * the spinlock before calling this function.
+ */
+static void disable_rsa(struct uart_8250_port *up)
+{
+ unsigned char mode;
+ int result;
+
+ if (up->port.type == PORT_RSA &&
+ up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) {
+ spin_lock_irq(&up->port.lock);
+
+ mode = serial_inp(up, UART_RSA_MSR);
+ result = !(mode & UART_RSA_MSR_FIFO);
+
+ if (!result) {
+ serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);
+ mode = serial_inp(up, UART_RSA_MSR);
+ result = !(mode & UART_RSA_MSR_FIFO);
+ }
+
+ if (result)
+ up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16;
+ spin_unlock_irq(&up->port.lock);
+ }
+}
+#endif /* CONFIG_SERIAL_8250_RSA */
+
+/*
+ * This is a quickie test to see how big the FIFO is.
+ * It doesn't work at all the time, more's the pity.
+ */
+static int size_fifo(struct uart_8250_port *up)
+{
+ unsigned char old_fcr, old_mcr, old_dll, old_dlm, old_lcr;
+ int count;
+
+ old_lcr = serial_inp(up, UART_LCR);
+ serial_outp(up, UART_LCR, 0);
+ old_fcr = serial_inp(up, UART_FCR);
+ old_mcr = serial_inp(up, UART_MCR);
+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+ serial_outp(up, UART_MCR, UART_MCR_LOOP);
+ serial_outp(up, UART_LCR, UART_LCR_DLAB);
+ old_dll = serial_inp(up, UART_DLL);
+ old_dlm = serial_inp(up, UART_DLM);
+ serial_outp(up, UART_DLL, 0x01);
+ serial_outp(up, UART_DLM, 0x00);
+ serial_outp(up, UART_LCR, 0x03);
+ for (count = 0; count < 256; count++)
+ serial_outp(up, UART_TX, count);
+ mdelay(20);/* FIXME - schedule_timeout */
+ for (count = 0; (serial_inp(up, UART_LSR) & UART_LSR_DR) &&
+ (count < 256); count++)
+ serial_inp(up, UART_RX);
+ serial_outp(up, UART_FCR, old_fcr);
+ serial_outp(up, UART_MCR, old_mcr);
+ serial_outp(up, UART_LCR, UART_LCR_DLAB);
+ serial_outp(up, UART_DLL, old_dll);
+ serial_outp(up, UART_DLM, old_dlm);
+ serial_outp(up, UART_LCR, old_lcr);
+
+ return count;
+}
+
+/*
+ * Read UART ID using the divisor method - set DLL and DLM to zero
+ * and the revision will be in DLL and device type in DLM. We
+ * preserve the device state across this.
+ */
+static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
+{
+ unsigned char old_dll, old_dlm, old_lcr;
+ unsigned int id;
+
+ old_lcr = serial_inp(p, UART_LCR);
+ serial_outp(p, UART_LCR, UART_LCR_DLAB);
+
+ old_dll = serial_inp(p, UART_DLL);
+ old_dlm = serial_inp(p, UART_DLM);
+
+ serial_outp(p, UART_DLL, 0);
+ serial_outp(p, UART_DLM, 0);
+
+ id = serial_inp(p, UART_DLL) | serial_inp(p, UART_DLM) << 8;
+
+ serial_outp(p, UART_DLL, old_dll);
+ serial_outp(p, UART_DLM, old_dlm);
+ serial_outp(p, UART_LCR, old_lcr);
+
+ return id;
+}
+
+/*
+ * This is a helper routine to autodetect StarTech/Exar/Oxsemi UART's.
+ * When this function is called we know it is at least a StarTech
+ * 16650 V2, but it might be one of several StarTech UARTs, or one of
+ * its clones. (We treat the broken original StarTech 16650 V1 as a
+ * 16550, and why not? Startech doesn't seem to even acknowledge its
+ * existence.)
+ *
+ * What evil have men's minds wrought...
+ */
+static void autoconfig_has_efr(struct uart_8250_port *up)
+{
+ unsigned int id1, id2, id3, rev;
+
+ /*
+ * Everything with an EFR has SLEEP
+ */
+ up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP;
+
+ /*
+ * First we check to see if it's an Oxford Semiconductor UART.
+ *
+ * If we have to do this here because some non-National
+ * Semiconductor clone chips lock up if you try writing to the
+ * LSR register (which serial_icr_read does)
+ */
+
+ /*
+ * Check for Oxford Semiconductor 16C950.
+ *
+ * EFR [4] must be set else this test fails.
+ *
+ * This shouldn't be necessary, but Mike Hudson (Exoray@isys.ca)
+ * claims that it's needed for 952 dual UART's (which are not
+ * recommended for new designs).
+ */
+ up->acr = 0;
+ serial_out(up, UART_LCR, 0xBF);
+ serial_out(up, UART_EFR, UART_EFR_ECB);
+ serial_out(up, UART_LCR, 0x00);
+ id1 = serial_icr_read(up, UART_ID1);
+ id2 = serial_icr_read(up, UART_ID2);
+ id3 = serial_icr_read(up, UART_ID3);
+ rev = serial_icr_read(up, UART_REV);
+
+ DEBUG_AUTOCONF("950id=%02x:%02x:%02x:%02x ", id1, id2, id3, rev);
+
+ if (id1 == 0x16 && id2 == 0xC9 &&
+ (id3 == 0x50 || id3 == 0x52 || id3 == 0x54)) {
+ up->port.type = PORT_16C950;
+ up->rev = rev | (id3 << 8);
+ return;
+ }
+
+ /*
+ * We check for a XR16C850 by setting DLL and DLM to 0, and then
+ * reading back DLL and DLM. The chip type depends on the DLM
+ * value read back:
+ * 0x10 - XR16C850 and the DLL contains the chip revision.
+ * 0x12 - XR16C2850.
+ * 0x14 - XR16C854.
+ */
+ id1 = autoconfig_read_divisor_id(up);
+ DEBUG_AUTOCONF("850id=%04x ", id1);
+
+ id2 = id1 >> 8;
+ if (id2 == 0x10 || id2 == 0x12 || id2 == 0x14) {
+ if (id2 == 0x10)
+ up->rev = id1 & 255;
+ up->port.type = PORT_16850;
+ return;
+ }
+
+ /*
+ * It wasn't an XR16C850.
+ *
+ * We distinguish between the '654 and the '650 by counting
+ * how many bytes are in the FIFO. I'm using this for now,
+ * since that's the technique that was sent to me in the
+ * serial driver update, but I'm not convinced this works.
+ * I've had problems doing this in the past. -TYT
+ */
+ if (size_fifo(up) == 64)
+ up->port.type = PORT_16654;
+ else
+ up->port.type = PORT_16650V2;
+}
+
+/*
+ * We detected a chip without a FIFO. Only two fall into
+ * this category - the original 8250 and the 16450. The
+ * 16450 has a scratch register (accessible with LCR=0)
+ */
+static void autoconfig_8250(struct uart_8250_port *up)
+{
+ unsigned char scratch, status1, status2;
+
+ up->port.type = PORT_8250;
+
+ scratch = serial_in(up, UART_SCR);
+ serial_outp(up, UART_SCR, 0xa5);
+ status1 = serial_in(up, UART_SCR);
+ serial_outp(up, UART_SCR, 0x5a);
+ status2 = serial_in(up, UART_SCR);
+ serial_outp(up, UART_SCR, scratch);
+
+ if (status1 == 0xa5 && status2 == 0x5a)
+ up->port.type = PORT_16450;
+}
+
+static int broken_efr(struct uart_8250_port *up)
+{
+ /*
+ * Exar ST16C2550 "A2" devices incorrectly detect as
+ * having an EFR, and report an ID of 0x0201. See
+ * http://www.exar.com/info.php?pdf=dan180_oct2004.pdf
+ */
+ if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16)
+ return 1;
+
+ return 0;
+}
+
+/*
+ * We know that the chip has FIFOs. Does it have an EFR? The
+ * EFR is located in the same register position as the IIR and
+ * we know the top two bits of the IIR are currently set. The
+ * EFR should contain zero. Try to read the EFR.
+ */
+static void autoconfig_16550a(struct uart_8250_port *up)
+{
+ unsigned char status1, status2;
+ unsigned int iersave;
+
+ up->port.type = PORT_16550A;
+ up->capabilities |= UART_CAP_FIFO;
+
+ /*
+ * Check for presence of the EFR when DLAB is set.
+ * Only ST16C650V1 UARTs pass this test.
+ */
+ serial_outp(up, UART_LCR, UART_LCR_DLAB);
+ if (serial_in(up, UART_EFR) == 0) {
+ serial_outp(up, UART_EFR, 0xA8);
+ if (serial_in(up, UART_EFR) != 0) {
+ DEBUG_AUTOCONF("EFRv1 ");
+ up->port.type = PORT_16650;
+ up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP;
+ } else {
+ DEBUG_AUTOCONF("Motorola 8xxx DUART ");
+ }
+ serial_outp(up, UART_EFR, 0);
+ return;
+ }
+
+ /*
+ * Maybe it requires 0xbf to be written to the LCR.
+ * (other ST16C650V2 UARTs, TI16C752A, etc)
+ */
+ serial_outp(up, UART_LCR, 0xBF);
+ if (serial_in(up, UART_EFR) == 0 && !broken_efr(up)) {
+ DEBUG_AUTOCONF("EFRv2 ");
+ autoconfig_has_efr(up);
+ return;
+ }
+
+ /*
+ * Check for a National Semiconductor SuperIO chip.
+ * Attempt to switch to bank 2, read the value of the LOOP bit
+ * from EXCR1. Switch back to bank 0, change it in MCR. Then
+ * switch back to bank 2, read it from EXCR1 again and check
+ * it's changed. If so, set baud_base in EXCR2 to 921600. -- dwmw2
+ * On PowerPC we don't want to change baud_base, as we have
+ * a number of different divisors. -- Tom Rini
+ */
+ serial_outp(up, UART_LCR, 0);
+ status1 = serial_in(up, UART_MCR);
+ serial_outp(up, UART_LCR, 0xE0);
+ status2 = serial_in(up, 0x02); /* EXCR1 */
+
+ if (!((status2 ^ status1) & UART_MCR_LOOP)) {
+ serial_outp(up, UART_LCR, 0);
+ serial_outp(up, UART_MCR, status1 ^ UART_MCR_LOOP);
+ serial_outp(up, UART_LCR, 0xE0);
+ status2 = serial_in(up, 0x02); /* EXCR1 */
+ serial_outp(up, UART_LCR, 0);
+ serial_outp(up, UART_MCR, status1);
+
+ if ((status2 ^ status1) & UART_MCR_LOOP) {
+#ifndef CONFIG_PPC
+ serial_outp(up, UART_LCR, 0xE0);
+ status1 = serial_in(up, 0x04); /* EXCR1 */
+ status1 &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
+ status1 |= 0x10; /* 1.625 divisor for baud_base --> 921600 */
+ serial_outp(up, 0x04, status1);
+ serial_outp(up, UART_LCR, 0);
+ up->port.uartclk = 921600*16;
+#endif
+
+ up->port.type = PORT_NS16550A;
+ up->capabilities |= UART_NATSEMI;
+ return;
+ }
+ }
+
+ /*
+ * No EFR. Try to detect a TI16750, which only sets bit 5 of
+ * the IIR when 64 byte FIFO mode is enabled when DLAB is set.
+ * Try setting it with and without DLAB set. Cheap clones
+ * set bit 5 without DLAB set.
+ */
+ serial_outp(up, UART_LCR, 0);
+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
+ status1 = serial_in(up, UART_IIR) >> 5;
+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+ serial_outp(up, UART_LCR, UART_LCR_DLAB);
+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
+ status2 = serial_in(up, UART_IIR) >> 5;
+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+ serial_outp(up, UART_LCR, 0);
+
+ DEBUG_AUTOCONF("iir1=%d iir2=%d ", status1, status2);
+
+ if (status1 == 6 && status2 == 7) {
+ up->port.type = PORT_16750;
+ up->capabilities |= UART_CAP_AFE | UART_CAP_SLEEP;
+ return;
+ }
+
+ /*
+ * Try writing and reading the UART_IER_UUE bit (b6).
+ * If it works, this is probably one of the Xscale platform's
+ * internal UARTs.
+ * We're going to explicitly set the UUE bit to 0 before
+ * trying to write and read a 1 just to make sure it's not
+ * already a 1 and maybe locked there before we even start start.
+ */
+ iersave = serial_in(up, UART_IER);
+ serial_outp(up, UART_IER, iersave & ~UART_IER_UUE);
+ if (!(serial_in(up, UART_IER) & UART_IER_UUE)) {
+ /*
+ * OK it's in a known zero state, try writing and reading
+ * without disturbing the current state of the other bits.
+ */
+ serial_outp(up, UART_IER, iersave | UART_IER_UUE);
+ if (serial_in(up, UART_IER) & UART_IER_UUE) {
+ /*
+ * It's an Xscale.
+ * We'll leave the UART_IER_UUE bit set to 1 (enabled).
+ */
+ DEBUG_AUTOCONF("Xscale ");
+ up->port.type = PORT_XSCALE;
+ up->capabilities |= UART_CAP_UUE;
+ return;
+ }
+ } else {
+ /*
+ * If we got here we couldn't force the IER_UUE bit to 0.
+ * Log it and continue.
+ */
+ DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 ");
+ }
+ serial_outp(up, UART_IER, iersave);
+}
+
+/*
+ * This routine is called by rs_init() to initialize a specific serial
+ * port. It determines what type of UART chip this serial port is
+ * using: 8250, 16450, 16550, 16550A. The important question is
+ * whether or not this UART is a 16550A or not, since this will
+ * determine whether or not we can use its FIFO features or not.
+ */
+static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
+{
+ unsigned char status1, scratch, scratch2, scratch3;
+ unsigned char save_lcr, save_mcr;
+ unsigned long flags;
+
+ if (!up->port.iobase && !up->port.mapbase && !up->port.membase)
+ return;
+
+ DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04x, 0x%p): ",
+ up->port.line, up->port.iobase, up->port.membase);
+
+ /*
+ * We really do need global IRQs disabled here - we're going to
+ * be frobbing the chips IRQ enable register to see if it exists.
+ */
+ spin_lock_irqsave(&up->port.lock, flags);
+// save_flags(flags); cli();
+
+ up->capabilities = 0;
+
+ if (!(up->port.flags & UPF_BUGGY_UART)) {
+ /*
+ * Do a simple existence test first; if we fail this,
+ * there's no point trying anything else.
+ *
+ * 0x80 is used as a nonsense port to prevent against
+ * false positives due to ISA bus float. The
+ * assumption is that 0x80 is a non-existent port;
+ * which should be safe since include/asm/io.h also
+ * makes this assumption.
+ *
+ * Note: this is safe as long as MCR bit 4 is clear
+ * and the device is in "PC" mode.
+ */
+ scratch = serial_inp(up, UART_IER);
+ serial_outp(up, UART_IER, 0);
+#ifdef __i386__
+ outb(0xff, 0x080);
+#endif
+ scratch2 = serial_inp(up, UART_IER);
+ serial_outp(up, UART_IER, 0x0F);
+#ifdef __i386__
+ outb(0, 0x080);
+#endif
+ scratch3 = serial_inp(up, UART_IER);
+ serial_outp(up, UART_IER, scratch);
+ if (scratch2 != 0 || scratch3 != 0x0F) {
+ /*
+ * We failed; there's nothing here
+ */
+ DEBUG_AUTOCONF("IER test failed (%02x, %02x) ",
+ scratch2, scratch3);
+ goto out;
+ }
+ }
+
+ save_mcr = serial_in(up, UART_MCR);
+ save_lcr = serial_in(up, UART_LCR);
+
+ /*
+ * Check to see if a UART is really there. Certain broken
+ * internal modems based on the Rockwell chipset fail this
+ * test, because they apparently don't implement the loopback
+ * test mode. So this test is skipped on the COM 1 through
+ * COM 4 ports. This *should* be safe, since no board
+ * manufacturer would be stupid enough to design a board
+ * that conflicts with COM 1-4 --- we hope!
+ */
+ if (!(up->port.flags & UPF_SKIP_TEST)) {
+ serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A);
+ status1 = serial_inp(up, UART_MSR) & 0xF0;
+ serial_outp(up, UART_MCR, save_mcr);
+ if (status1 != 0x90) {
+ DEBUG_AUTOCONF("LOOP test failed (%02x) ",
+ status1);
+ goto out;
+ }
+ }
+
+ /*
+ * We're pretty sure there's a port here. Lets find out what
+ * type of port it is. The IIR top two bits allows us to find
+ * out if its 8250 or 16450, 16550, 16550A or later. This
+ * determines what we test for next.
+ *
+ * We also initialise the EFR (if any) to zero for later. The
+ * EFR occupies the same register location as the FCR and IIR.
+ */
+ serial_outp(up, UART_LCR, 0xBF);
+ serial_outp(up, UART_EFR, 0);
+ serial_outp(up, UART_LCR, 0);
+
+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+ scratch = serial_in(up, UART_IIR) >> 6;
+
+ DEBUG_AUTOCONF("iir=%d ", scratch);
+
+ switch (scratch) {
+ case 0:
+ autoconfig_8250(up);
+ break;
+ case 1:
+ up->port.type = PORT_UNKNOWN;
+ break;
+ case 2:
+ up->port.type = PORT_16550;
+ break;
+ case 3:
+ autoconfig_16550a(up);
+ break;
+ }
+
+#ifdef CONFIG_SERIAL_8250_RSA
+ /*
+ * Only probe for RSA ports if we got the region.
+ */
+ if (up->port.type == PORT_16550A && probeflags & PROBE_RSA) {
+ int i;
+
+ for (i = 0 ; i < probe_rsa_count; ++i) {
+ if (probe_rsa[i] == up->port.iobase &&
+ __enable_rsa(up)) {
+ up->port.type = PORT_RSA;
+ break;
+ }
+ }
+ }
+#endif
+ serial_outp(up, UART_LCR, save_lcr);
+
+ if (up->capabilities != uart_config[up->port.type].flags) {
+ printk(KERN_WARNING
+ "ttyS%d: detected caps %08x should be %08x\n",
+ up->port.line, up->capabilities,
+ uart_config[up->port.type].flags);
+ }
+
+ up->port.fifosize = uart_config[up->port.type].fifo_size;
+ up->capabilities = uart_config[up->port.type].flags;
+ up->tx_loadsz = uart_config[up->port.type].tx_loadsz;
+
+ if (up->port.type == PORT_UNKNOWN)
+ goto out;
+
+ /*
+ * Reset the UART.
+ */
+#ifdef CONFIG_SERIAL_8250_RSA
+ if (up->port.type == PORT_RSA)
+ serial_outp(up, UART_RSA_FRR, 0);
+#endif
+ serial_outp(up, UART_MCR, save_mcr);
+ serial8250_clear_fifos(up);
+ (void)serial_in(up, UART_RX);
+ serial_outp(up, UART_IER, 0);
+
+ out:
+ spin_unlock_irqrestore(&up->port.lock, flags);
+// restore_flags(flags);
+ DEBUG_AUTOCONF("type=%s\n", uart_config[up->port.type].name);
+}
+
+static void autoconfig_irq(struct uart_8250_port *up)
+{
+ unsigned char save_mcr, save_ier;
+ unsigned char save_ICP = 0;
+ unsigned int ICP = 0;
+ unsigned long irqs;
+ int irq;
+
+ if (up->port.flags & UPF_FOURPORT) {
+ ICP = (up->port.iobase & 0xfe0) | 0x1f;
+ save_ICP = inb_p(ICP);
+ outb_p(0x80, ICP);
+ (void) inb_p(ICP);
+ }
+
+ /* forget possible initially masked and pending IRQ */
+ probe_irq_off(probe_irq_on());
+ save_mcr = serial_inp(up, UART_MCR);
+ save_ier = serial_inp(up, UART_IER);
+ serial_outp(up, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2);
+
+ irqs = probe_irq_on();
+ serial_outp(up, UART_MCR, 0);
+ udelay (10);
+ if (up->port.flags & UPF_FOURPORT) {
+ serial_outp(up, UART_MCR,
+ UART_MCR_DTR | UART_MCR_RTS);
+ } else {
+ serial_outp(up, UART_MCR,
+ UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2);
+ }
+ serial_outp(up, UART_IER, 0x0f); /* enable all intrs */
+ (void)serial_inp(up, UART_LSR);
+ (void)serial_inp(up, UART_RX);
+ (void)serial_inp(up, UART_IIR);
+ (void)serial_inp(up, UART_MSR);
+ serial_outp(up, UART_TX, 0xFF);
+ udelay (20);
+ irq = probe_irq_off(irqs);
+
+ serial_outp(up, UART_MCR, save_mcr);
+ serial_outp(up, UART_IER, save_ier);
+
+ if (up->port.flags & UPF_FOURPORT)
+ outb_p(save_ICP, ICP);
+
+ up->port.irq = (irq > 0) ? irq : 0;
+}
+
+static void serial8250_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+
+ if (up->ier & UART_IER_THRI) {
+ up->ier &= ~UART_IER_THRI;
+ serial_out(up, UART_IER, up->ier);
+ }
+
+ /*
+ * We only do this from uart_stop - if we run out of
+ * characters to send, we don't want to prevent the
+ * FIFO from emptying.
+ */
+ if (up->port.type == PORT_16C950 && tty_stop) {
+ up->acr |= UART_ACR_TXDIS;
+ serial_icr_write(up, UART_ACR, up->acr);
+ }
+}
+
+static void serial8250_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+
+ if (!(up->ier & UART_IER_THRI)) {
+ up->ier |= UART_IER_THRI;
+ serial_out(up, UART_IER, up->ier);
+ }
+ /*
+ * We only do this from uart_start
+ */
+ if (tty_start && up->port.type == PORT_16C950) {
+ up->acr &= ~UART_ACR_TXDIS;
+ serial_icr_write(up, UART_ACR, up->acr);
+ }
+}
+
+static void serial8250_stop_rx(struct uart_port *port)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+
+ up->ier &= ~UART_IER_RLSI;
+ up->port.read_status_mask &= ~UART_LSR_DR;
+ serial_out(up, UART_IER, up->ier);
+}
+
+static void serial8250_enable_ms(struct uart_port *port)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+
+ up->ier |= UART_IER_MSI;
+ serial_out(up, UART_IER, up->ier);
+}
+
+static _INLINE_ void
+receive_chars(struct uart_8250_port *up, int *status, struct pt_regs *regs)
+{
+ struct tty_struct *tty = up->port.info->tty;
+ unsigned char ch, lsr = *status;
+ int max_count = 256;
+ char flag;
+
+ do {
+ /* The following is not allowed by the tty layer and
+ unsafe. It should be fixed ASAP */
+ if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
+ if (tty->low_latency) {
+ spin_unlock(&up->port.lock);
+ tty_flip_buffer_push(tty);
+ spin_lock(&up->port.lock);
+ }
+ /* If this failed then we will throw away the
+ bytes but must do so to clear interrupts */
+ }
+ ch = serial_inp(up, UART_RX);
+ flag = TTY_NORMAL;
+ up->port.icount.rx++;
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ /*
+ * Recover the break flag from console xmit
+ */
+ if (up->port.line == up->port.cons->index) {
+ lsr |= up->lsr_break_flag;
+ up->lsr_break_flag = 0;
+ }
+#endif
+
+ if (unlikely(lsr & (UART_LSR_BI | UART_LSR_PE |
+ UART_LSR_FE | UART_LSR_OE))) {
+ /*
+ * For statistics only
+ */
+ if (lsr & UART_LSR_BI) {
+ lsr &= ~(UART_LSR_FE | UART_LSR_PE);
+ up->port.icount.brk++;
+ /*
+ * We do the SysRQ and SAK checking
+ * here because otherwise the break
+ * may get masked by ignore_status_mask
+ * or read_status_mask.
+ */
+ if (uart_handle_break(&up->port))
+ goto ignore_char;
+ } else if (lsr & UART_LSR_PE)
+ up->port.icount.parity++;
+ else if (lsr & UART_LSR_FE)
+ up->port.icount.frame++;
+ if (lsr & UART_LSR_OE)
+ up->port.icount.overrun++;
+
+ /*
+ * Mask off conditions which should be ingored.
+ */
+ lsr &= up->port.read_status_mask;
+
+ if (lsr & UART_LSR_BI) {
+ DEBUG_INTR("handling break....");
+ flag = TTY_BREAK;
+ } else if (lsr & UART_LSR_PE)
+ flag = TTY_PARITY;
+ else if (lsr & UART_LSR_FE)
+ flag = TTY_FRAME;
+ }
+ if (uart_handle_sysrq_char(&up->port, ch, regs))
+ goto ignore_char;
+ if ((lsr & up->port.ignore_status_mask) == 0) {
+ tty_insert_flip_char(tty, ch, flag);
+ }
+ if ((lsr & UART_LSR_OE) &&
+ tty->flip.count < TTY_FLIPBUF_SIZE) {
+ /*
+ * Overrun is special, since it's reported
+ * immediately, and doesn't affect the current
+ * character.
+ */
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ }
+ ignore_char:
+ lsr = serial_inp(up, UART_LSR);
+ } while ((lsr & UART_LSR_DR) && (max_count-- > 0));
+ spin_unlock(&up->port.lock);
+ tty_flip_buffer_push(tty);
+ spin_lock(&up->port.lock);
+ *status = lsr;
+}
+
+static _INLINE_ void transmit_chars(struct uart_8250_port *up)
+{
+ struct circ_buf *xmit = &up->port.info->xmit;
+ int count;
+
+ if (up->port.x_char) {
+ serial_outp(up, UART_TX, up->port.x_char);
+ up->port.icount.tx++;
+ up->port.x_char = 0;
+ return;
+ }
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
+ serial8250_stop_tx(&up->port, 0);
+ return;
+ }
+
+ count = up->tx_loadsz;
+ do {
+ serial_out(up, UART_TX, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ up->port.icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ } while (--count > 0);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+
+ DEBUG_INTR("THRE...");
+
+ if (uart_circ_empty(xmit))
+ serial8250_stop_tx(&up->port, 0);
+}
+
+static _INLINE_ void check_modem_status(struct uart_8250_port *up)
+{
+ int status;
+
+ status = serial_in(up, UART_MSR);
+
+ if ((status & UART_MSR_ANY_DELTA) == 0)
+ return;
+
+ if (status & UART_MSR_TERI)
+ up->port.icount.rng++;
+ if (status & UART_MSR_DDSR)
+ up->port.icount.dsr++;
+ if (status & UART_MSR_DDCD)
+ uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
+ if (status & UART_MSR_DCTS)
+ uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
+
+ wake_up_interruptible(&up->port.info->delta_msr_wait);
+}
+
+/*
+ * This handles the interrupt from one port.
+ */
+static inline void
+serial8250_handle_port(struct uart_8250_port *up, struct pt_regs *regs)
+{
+ unsigned int status = serial_inp(up, UART_LSR);
+
+ DEBUG_INTR("status = %x...", status);
+
+ if (status & UART_LSR_DR)
+ receive_chars(up, &status, regs);
+ check_modem_status(up);
+ if (status & UART_LSR_THRE)
+ transmit_chars(up);
+}
+
+/*
+ * This is the serial driver's interrupt routine.
+ *
+ * Arjan thinks the old way was overly complex, so it got simplified.
+ * Alan disagrees, saying that need the complexity to handle the weird
+ * nature of ISA shared interrupts. (This is a special exception.)
+ *
+ * In order to handle ISA shared interrupts properly, we need to check
+ * that all ports have been serviced, and therefore the ISA interrupt
+ * line has been de-asserted.
+ *
+ * This means we need to loop through all ports. checking that they
+ * don't have an interrupt pending.
+ */
+static irqreturn_t serial8250_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct irq_info *i = dev_id;
+ struct list_head *l, *end = NULL;
+ int pass_counter = 0, handled = 0;
+
+ DEBUG_INTR("serial8250_interrupt(%d)...", irq);
+
+ spin_lock(&i->lock);
+
+ l = i->head;
+ do {
+ struct uart_8250_port *up;
+ unsigned int iir;
+
+ up = list_entry(l, struct uart_8250_port, list);
+
+ iir = serial_in(up, UART_IIR);
+ if (!(iir & UART_IIR_NO_INT)) {
+ spin_lock(&up->port.lock);
+ serial8250_handle_port(up, regs);
+ spin_unlock(&up->port.lock);
+
+ handled = 1;
+
+ end = NULL;
+ } else if (end == NULL)
+ end = l;
+
+ l = l->next;
+
+ if (l == i->head && pass_counter++ > PASS_LIMIT) {
+ /* If we hit this, we're dead. */
+ printk(KERN_ERR "serial8250: too much work for "
+ "irq%d\n", irq);
+ break;
+ }
+ } while (l != end);
+
+ spin_unlock(&i->lock);
+
+ DEBUG_INTR("end.\n");
+
+ return IRQ_RETVAL(handled);
+}
+
+/*
+ * To support ISA shared interrupts, we need to have one interrupt
+ * handler that ensures that the IRQ line has been deasserted
+ * before returning. Failing to do this will result in the IRQ
+ * line being stuck active, and, since ISA irqs are edge triggered,
+ * no more IRQs will be seen.
+ */
+static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up)
+{
+ spin_lock_irq(&i->lock);
+
+ if (!list_empty(i->head)) {
+ if (i->head == &up->list)
+ i->head = i->head->next;
+ list_del(&up->list);
+ } else {
+ BUG_ON(i->head != &up->list);
+ i->head = NULL;
+ }
+
+ spin_unlock_irq(&i->lock);
+}
+
+static int serial_link_irq_chain(struct uart_8250_port *up)
+{
+ struct irq_info *i = irq_lists + up->port.irq;
+ int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? SA_SHIRQ : 0;
+
+ spin_lock_irq(&i->lock);
+
+ if (i->head) {
+ list_add(&up->list, i->head);
+ spin_unlock_irq(&i->lock);
+
+ ret = 0;
+ } else {
+ INIT_LIST_HEAD(&up->list);
+ i->head = &up->list;
+ spin_unlock_irq(&i->lock);
+
+ ret = request_irq(up->port.irq, serial8250_interrupt,
+ irq_flags, "serial", i);
+ if (ret < 0)
+ serial_do_unlink(i, up);
+ }
+
+ return ret;
+}
+
+static void serial_unlink_irq_chain(struct uart_8250_port *up)
+{
+ struct irq_info *i = irq_lists + up->port.irq;
+
+ BUG_ON(i->head == NULL);
+
+ if (list_empty(i->head))
+ free_irq(up->port.irq, i);
+
+ serial_do_unlink(i, up);
+}
+
+/*
+ * This function is used to handle ports that do not have an
+ * interrupt. This doesn't work very well for 16450's, but gives
+ * barely passable results for a 16550A. (Although at the expense
+ * of much CPU overhead).
+ */
+static void serial8250_timeout(unsigned long data)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)data;
+ unsigned int timeout;
+ unsigned int iir;
+
+ iir = serial_in(up, UART_IIR);
+ if (!(iir & UART_IIR_NO_INT)) {
+ spin_lock(&up->port.lock);
+ serial8250_handle_port(up, NULL);
+ spin_unlock(&up->port.lock);
+ }
+
+ timeout = up->port.timeout;
+ timeout = timeout > 6 ? (timeout / 2 - 2) : 1;
+ mod_timer(&up->timer, jiffies + timeout);
+}
+
+static unsigned int serial8250_tx_empty(struct uart_port *port)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+ unsigned long flags;
+ unsigned int ret;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return ret;
+}
+
+static unsigned int serial8250_get_mctrl(struct uart_port *port)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+ unsigned long flags;
+ unsigned char status;
+ unsigned int ret;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ status = serial_in(up, UART_MSR);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ ret = 0;
+ if (status & UART_MSR_DCD)
+ ret |= TIOCM_CAR;
+ if (status & UART_MSR_RI)
+ ret |= TIOCM_RNG;
+ if (status & UART_MSR_DSR)
+ ret |= TIOCM_DSR;
+ if (status & UART_MSR_CTS)
+ ret |= TIOCM_CTS;
+ return ret;
+}
+
+static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+ unsigned char mcr = 0;
+
+ if (mctrl & TIOCM_RTS)
+ mcr |= UART_MCR_RTS;
+ if (mctrl & TIOCM_DTR)
+ mcr |= UART_MCR_DTR;
+ if (mctrl & TIOCM_OUT1)
+ mcr |= UART_MCR_OUT1;
+ if (mctrl & TIOCM_OUT2)
+ mcr |= UART_MCR_OUT2;
+ if (mctrl & TIOCM_LOOP)
+ mcr |= UART_MCR_LOOP;
+
+ mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr;
+
+ serial_out(up, UART_MCR, mcr);
+}
+
+static void serial8250_break_ctl(struct uart_port *port, int break_state)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ if (break_state == -1)
+ up->lcr |= UART_LCR_SBC;
+ else
+ up->lcr &= ~UART_LCR_SBC;
+ serial_out(up, UART_LCR, up->lcr);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static int serial8250_startup(struct uart_port *port)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+ unsigned long flags;
+ int retval;
+
+ up->capabilities = uart_config[up->port.type].flags;
+ up->mcr = 0;
+
+ if (up->port.type == PORT_16C950) {
+ /* Wake up and initialize UART */
+ up->acr = 0;
+ serial_outp(up, UART_LCR, 0xBF);
+ serial_outp(up, UART_EFR, UART_EFR_ECB);
+ serial_outp(up, UART_IER, 0);
+ serial_outp(up, UART_LCR, 0);
+ serial_icr_write(up, UART_CSR, 0); /* Reset the UART */
+ serial_outp(up, UART_LCR, 0xBF);
+ serial_outp(up, UART_EFR, UART_EFR_ECB);
+ serial_outp(up, UART_LCR, 0);
+ }
+
+#ifdef CONFIG_SERIAL_8250_RSA
+ /*
+ * If this is an RSA port, see if we can kick it up to the
+ * higher speed clock.
+ */
+ enable_rsa(up);
+#endif
+
+ /*
+ * Clear the FIFO buffers and disable them.
+ * (they will be reeanbled in set_termios())
+ */
+ serial8250_clear_fifos(up);
+
+ /*
+ * Clear the interrupt registers.
+ */
+ (void) serial_inp(up, UART_LSR);
+ (void) serial_inp(up, UART_RX);
+ (void) serial_inp(up, UART_IIR);
+ (void) serial_inp(up, UART_MSR);
+
+ /*
+ * At this point, there's no way the LSR could still be 0xff;
+ * if it is, then bail out, because there's likely no UART
+ * here.
+ */
+ if (!(up->port.flags & UPF_BUGGY_UART) &&
+ (serial_inp(up, UART_LSR) == 0xff)) {
+ printk("ttyS%d: LSR safety check engaged!\n", up->port.line);
+ return -ENODEV;
+ }
+
+ /*
+ * For a XR16C850, we need to set the trigger levels
+ */
+ if (up->port.type == PORT_16850) {
+ unsigned char fctr;
+
+ serial_outp(up, UART_LCR, 0xbf);
+
+ fctr = serial_inp(up, UART_FCTR) & ~(UART_FCTR_RX|UART_FCTR_TX);
+ serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_RX);
+ serial_outp(up, UART_TRG, UART_TRG_96);
+ serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_TX);
+ serial_outp(up, UART_TRG, UART_TRG_96);
+
+ serial_outp(up, UART_LCR, 0);
+ }
+
+ /*
+ * If the "interrupt" for this port doesn't correspond with any
+ * hardware interrupt, we use a timer-based system. The original
+ * driver used to do this with IRQ0.
+ */
+ if (!is_real_interrupt(up->port.irq)) {
+ unsigned int timeout = up->port.timeout;
+
+ timeout = timeout > 6 ? (timeout / 2 - 2) : 1;
+
+ up->timer.data = (unsigned long)up;
+ mod_timer(&up->timer, jiffies + timeout);
+ } else {
+ retval = serial_link_irq_chain(up);
+ if (retval)
+ return retval;
+ }
+
+ /*
+ * Now, initialize the UART
+ */
+ serial_outp(up, UART_LCR, UART_LCR_WLEN8);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ if (up->port.flags & UPF_FOURPORT) {
+ if (!is_real_interrupt(up->port.irq))
+ up->port.mctrl |= TIOCM_OUT1;
+ } else
+ /*
+ * Most PC uarts need OUT2 raised to enable interrupts.
+ */
+ if (is_real_interrupt(up->port.irq))
+ up->port.mctrl |= TIOCM_OUT2;
+
+ serial8250_set_mctrl(&up->port, up->port.mctrl);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /*
+ * Finally, enable interrupts. Note: Modem status interrupts
+ * are set via set_termios(), which will be occurring imminently
+ * anyway, so we don't enable them here.
+ */
+ up->ier = UART_IER_RLSI | UART_IER_RDI;
+ serial_outp(up, UART_IER, up->ier);
+
+ if (up->port.flags & UPF_FOURPORT) {
+ unsigned int icp;
+ /*
+ * Enable interrupts on the AST Fourport board
+ */
+ icp = (up->port.iobase & 0xfe0) | 0x01f;
+ outb_p(0x80, icp);
+ (void) inb_p(icp);
+ }
+
+ /*
+ * And clear the interrupt registers again for luck.
+ */
+ (void) serial_inp(up, UART_LSR);
+ (void) serial_inp(up, UART_RX);
+ (void) serial_inp(up, UART_IIR);
+ (void) serial_inp(up, UART_MSR);
+
+ return 0;
+}
+
+static void serial8250_shutdown(struct uart_port *port)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+ unsigned long flags;
+
+ /*
+ * Disable interrupts from this port
+ */
+ up->ier = 0;
+ serial_outp(up, UART_IER, 0);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ if (up->port.flags & UPF_FOURPORT) {
+ /* reset interrupts on the AST Fourport board */
+ inb((up->port.iobase & 0xfe0) | 0x1f);
+ up->port.mctrl |= TIOCM_OUT1;
+ } else
+ up->port.mctrl &= ~TIOCM_OUT2;
+
+ serial8250_set_mctrl(&up->port, up->port.mctrl);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /*
+ * Disable break condition and FIFOs
+ */
+ serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC);
+ serial8250_clear_fifos(up);
+
+#ifdef CONFIG_SERIAL_8250_RSA
+ /*
+ * Reset the RSA board back to 115kbps compat mode.
+ */
+ disable_rsa(up);
+#endif
+
+ /*
+ * Read data port to reset things, and then unlink from
+ * the IRQ chain.
+ */
+ (void) serial_in(up, UART_RX);
+
+ if (!is_real_interrupt(up->port.irq))
+ del_timer_sync(&up->timer);
+ else
+ serial_unlink_irq_chain(up);
+}
+
+static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud)
+{
+ unsigned int quot;
+
+ /*
+ * Handle magic divisors for baud rates above baud_base on
+ * SMSC SuperIO chips.
+ */
+ if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
+ baud == (port->uartclk/4))
+ quot = 0x8001;
+ else if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
+ baud == (port->uartclk/8))
+ quot = 0x8002;
+ else
+ quot = uart_get_divisor(port, baud);
+
+ return quot;
+}
+
+static void
+serial8250_set_termios(struct uart_port *port, struct termios *termios,
+ struct termios *old)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+ unsigned char cval, fcr = 0;
+ unsigned long flags;
+ unsigned int baud, quot;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ cval = 0x00;
+ break;
+ case CS6:
+ cval = 0x01;
+ break;
+ case CS7:
+ cval = 0x02;
+ break;
+ default:
+ case CS8:
+ cval = 0x03;
+ break;
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ cval |= 0x04;
+ if (termios->c_cflag & PARENB)
+ cval |= UART_LCR_PARITY;
+ if (!(termios->c_cflag & PARODD))
+ cval |= UART_LCR_EPAR;
+#ifdef CMSPAR
+ if (termios->c_cflag & CMSPAR)
+ cval |= UART_LCR_SPAR;
+#endif
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ quot = serial8250_get_divisor(port, baud);
+
+ /*
+ * Work around a bug in the Oxford Semiconductor 952 rev B
+ * chip which causes it to seriously miscalculate baud rates
+ * when DLL is 0.
+ */
+ if ((quot & 0xff) == 0 && up->port.type == PORT_16C950 &&
+ up->rev == 0x5201)
+ quot ++;
+
+ if (up->capabilities & UART_CAP_FIFO && up->port.fifosize > 1) {
+ if (baud < 2400)
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
+ else
+ fcr = uart_config[up->port.type].fcr;
+ }
+
+ /*
+ * MCR-based auto flow control. When AFE is enabled, RTS will be
+ * deasserted when the receive FIFO contains more characters than
+ * the trigger, or the MCR RTS bit is cleared. In the case where
+ * the remote UART is not using CTS auto flow control, we must
+ * have sufficient FIFO entries for the latency of the remote
+ * UART to respond. IOW, at least 32 bytes of FIFO.
+ */
+ if (up->capabilities & UART_CAP_AFE && up->port.fifosize >= 32) {
+ up->mcr &= ~UART_MCR_AFE;
+ if (termios->c_cflag & CRTSCTS)
+ up->mcr |= UART_MCR_AFE;
+ }
+
+ /*
+ * Ok, we're now changing the port state. Do it with
+ * interrupts disabled.
+ */
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
+ if (termios->c_iflag & INPCK)
+ up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ up->port.read_status_mask |= UART_LSR_BI;
+
+ /*
+ * Characteres to ignore
+ */
+ up->port.ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
+ if (termios->c_iflag & IGNBRK) {
+ up->port.ignore_status_mask |= UART_LSR_BI;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_OE;
+ }
+
+ /*
+ * ignore all characters if CREAD is not set
+ */
+ if ((termios->c_cflag & CREAD) == 0)
+ up->port.ignore_status_mask |= UART_LSR_DR;
+
+ /*
+ * CTS flow control flag and modem status interrupts
+ */
+ up->ier &= ~UART_IER_MSI;
+ if (UART_ENABLE_MS(&up->port, termios->c_cflag))
+ up->ier |= UART_IER_MSI;
+ if (up->capabilities & UART_CAP_UUE)
+ up->ier |= UART_IER_UUE | UART_IER_RTOIE;
+
+ serial_out(up, UART_IER, up->ier);
+
+ if (up->capabilities & UART_CAP_EFR) {
+ unsigned char efr = 0;
+ /*
+ * TI16C752/Startech hardware flow control. FIXME:
+ * - TI16C752 requires control thresholds to be set.
+ * - UART_MCR_RTS is ineffective if auto-RTS mode is enabled.
+ */
+ if (termios->c_cflag & CRTSCTS)
+ efr |= UART_EFR_CTS;
+
+ serial_outp(up, UART_LCR, 0xBF);
+ serial_outp(up, UART_EFR, efr);
+ }
+
+ if (up->capabilities & UART_NATSEMI) {
+ /* Switch to bank 2 not bank 1, to avoid resetting EXCR2 */
+ serial_outp(up, UART_LCR, 0xe0);
+ } else {
+ serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
+ }
+
+ serial_outp(up, UART_DLL, quot & 0xff); /* LS of divisor */
+ serial_outp(up, UART_DLM, quot >> 8); /* MS of divisor */
+
+ /*
+ * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
+ * is written without DLAB set, this mode will be disabled.
+ */
+ if (up->port.type == PORT_16750)
+ serial_outp(up, UART_FCR, fcr);
+
+ serial_outp(up, UART_LCR, cval); /* reset DLAB */
+ up->lcr = cval; /* Save LCR */
+ if (up->port.type != PORT_16750) {
+ if (fcr & UART_FCR_ENABLE_FIFO) {
+ /* emulated UARTs (Lucent Venus 167x) need two steps */
+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+ }
+ serial_outp(up, UART_FCR, fcr); /* set fcr */
+ }
+ serial8250_set_mctrl(&up->port, up->port.mctrl);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void
+serial8250_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ struct uart_8250_port *p = (struct uart_8250_port *)port;
+
+ serial8250_set_sleep(p, state != 0);
+
+ if (p->pm)
+ p->pm(port, state, oldstate);
+}
+
+/*
+ * Resource handling.
+ */
+static int serial8250_request_std_resource(struct uart_8250_port *up)
+{
+ unsigned int size = 8 << up->port.regshift;
+ int ret = 0;
+
+ switch (up->port.iotype) {
+ case UPIO_MEM:
+ if (!up->port.mapbase)
+ break;
+
+ if (!request_mem_region(up->port.mapbase, size, "serial")) {
+ ret = -EBUSY;
+ break;
+ }
+
+ if (up->port.flags & UPF_IOREMAP) {
+ up->port.membase = ioremap(up->port.mapbase, size);
+ if (!up->port.membase) {
+ release_mem_region(up->port.mapbase, size);
+ ret = -ENOMEM;
+ }
+ }
+ break;
+
+ case UPIO_HUB6:
+ case UPIO_PORT:
+ if (!request_region(up->port.iobase, size, "serial"))
+ ret = -EBUSY;
+ break;
+ }
+ return ret;
+}
+
+static void serial8250_release_std_resource(struct uart_8250_port *up)
+{
+ unsigned int size = 8 << up->port.regshift;
+
+ switch (up->port.iotype) {
+ case UPIO_MEM:
+ if (!up->port.mapbase)
+ break;
+
+ if (up->port.flags & UPF_IOREMAP) {
+ iounmap(up->port.membase);
+ up->port.membase = NULL;
+ }
+
+ release_mem_region(up->port.mapbase, size);
+ break;
+
+ case UPIO_HUB6:
+ case UPIO_PORT:
+ release_region(up->port.iobase, size);
+ break;
+ }
+}
+
+static int serial8250_request_rsa_resource(struct uart_8250_port *up)
+{
+ unsigned long start = UART_RSA_BASE << up->port.regshift;
+ unsigned int size = 8 << up->port.regshift;
+ int ret = 0;
+
+ switch (up->port.iotype) {
+ case UPIO_MEM:
+ ret = -EINVAL;
+ break;
+
+ case UPIO_HUB6:
+ case UPIO_PORT:
+ start += up->port.iobase;
+ if (!request_region(start, size, "serial-rsa"))
+ ret = -EBUSY;
+ break;
+ }
+
+ return ret;
+}
+
+static void serial8250_release_rsa_resource(struct uart_8250_port *up)
+{
+ unsigned long offset = UART_RSA_BASE << up->port.regshift;
+ unsigned int size = 8 << up->port.regshift;
+
+ switch (up->port.iotype) {
+ case UPIO_MEM:
+ break;
+
+ case UPIO_HUB6:
+ case UPIO_PORT:
+ release_region(up->port.iobase + offset, size);
+ break;
+ }
+}
+
+static void serial8250_release_port(struct uart_port *port)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+
+ serial8250_release_std_resource(up);
+ if (up->port.type == PORT_RSA)
+ serial8250_release_rsa_resource(up);
+}
+
+static int serial8250_request_port(struct uart_port *port)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+ int ret = 0;
+
+ ret = serial8250_request_std_resource(up);
+ if (ret == 0 && up->port.type == PORT_RSA) {
+ ret = serial8250_request_rsa_resource(up);
+ if (ret < 0)
+ serial8250_release_std_resource(up);
+ }
+
+ return ret;
+}
+
+static void serial8250_config_port(struct uart_port *port, int flags)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+ int probeflags = PROBE_ANY;
+ int ret;
+
+ /*
+ * Don't probe for MCA ports on non-MCA machines.
+ */
+ if (up->port.flags & UPF_BOOT_ONLYMCA && !MCA_bus)
+ return;
+
+ /*
+ * Find the region that we can probe for. This in turn
+ * tells us whether we can probe for the type of port.
+ */
+ ret = serial8250_request_std_resource(up);
+ if (ret < 0)
+ return;
+
+ ret = serial8250_request_rsa_resource(up);
+ if (ret < 0)
+ probeflags &= ~PROBE_RSA;
+
+ if (flags & UART_CONFIG_TYPE)
+ autoconfig(up, probeflags);
+ if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
+ autoconfig_irq(up);
+
+ if (up->port.type != PORT_RSA && probeflags & PROBE_RSA)
+ serial8250_release_rsa_resource(up);
+ if (up->port.type == PORT_UNKNOWN)
+ serial8250_release_std_resource(up);
+}
+
+static int
+serial8250_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ if (ser->irq >= NR_IRQS || ser->irq < 0 ||
+ ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
+ ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS ||
+ ser->type == PORT_STARTECH)
+ return -EINVAL;
+ return 0;
+}
+
+static const char *
+serial8250_type(struct uart_port *port)
+{
+ int type = port->type;
+
+ if (type >= ARRAY_SIZE(uart_config))
+ type = 0;
+ return uart_config[type].name;
+}
+
+static struct uart_ops serial8250_pops = {
+ .tx_empty = serial8250_tx_empty,
+ .set_mctrl = serial8250_set_mctrl,
+ .get_mctrl = serial8250_get_mctrl,
+ .stop_tx = serial8250_stop_tx,
+ .start_tx = serial8250_start_tx,
+ .stop_rx = serial8250_stop_rx,
+ .enable_ms = serial8250_enable_ms,
+ .break_ctl = serial8250_break_ctl,
+ .startup = serial8250_startup,
+ .shutdown = serial8250_shutdown,
+ .set_termios = serial8250_set_termios,
+ .pm = serial8250_pm,
+ .type = serial8250_type,
+ .release_port = serial8250_release_port,
+ .request_port = serial8250_request_port,
+ .config_port = serial8250_config_port,
+ .verify_port = serial8250_verify_port,
+};
+
+static struct uart_8250_port serial8250_ports[UART_NR];
+
+static void __init serial8250_isa_init_ports(void)
+{
+ struct uart_8250_port *up;
+ static int first = 1;
+ int i;
+
+ if (!first)
+ return;
+ first = 0;
+
+ for (i = 0; i < UART_NR; i++) {
+ struct uart_8250_port *up = &serial8250_ports[i];
+
+ up->port.line = i;
+ spin_lock_init(&up->port.lock);
+
+ init_timer(&up->timer);
+ up->timer.function = serial8250_timeout;
+
+ /*
+ * ALPHA_KLUDGE_MCR needs to be killed.
+ */
+ up->mcr_mask = ~ALPHA_KLUDGE_MCR;
+ up->mcr_force = ALPHA_KLUDGE_MCR;
+
+ up->port.ops = &serial8250_pops;
+ }
+
+ for (i = 0, up = serial8250_ports; i < ARRAY_SIZE(old_serial_port);
+ i++, up++) {
+ up->port.iobase = old_serial_port[i].port;
+ up->port.irq = irq_canonicalize(old_serial_port[i].irq);
+ up->port.uartclk = old_serial_port[i].baud_base * 16;
+ up->port.flags = old_serial_port[i].flags;
+ up->port.hub6 = old_serial_port[i].hub6;
+ up->port.membase = old_serial_port[i].iomem_base;
+ up->port.iotype = old_serial_port[i].io_type;
+ up->port.regshift = old_serial_port[i].iomem_reg_shift;
+ if (share_irqs)
+ up->port.flags |= UPF_SHARE_IRQ;
+ }
+}
+
+static void __init
+serial8250_register_ports(struct uart_driver *drv, struct device *dev)
+{
+ int i;
+
+ serial8250_isa_init_ports();
+
+ for (i = 0; i < UART_NR; i++) {
+ struct uart_8250_port *up = &serial8250_ports[i];
+
+ up->port.dev = dev;
+ uart_add_one_port(drv, &up->port);
+ }
+}
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+
+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+
+/*
+ * Wait for transmitter & holding register to empty
+ */
+static inline void wait_for_xmitr(struct uart_8250_port *up)
+{
+ unsigned int status, tmout = 10000;
+
+ /* Wait up to 10ms for the character(s) to be sent. */
+ do {
+ status = serial_in(up, UART_LSR);
+
+ if (status & UART_LSR_BI)
+ up->lsr_break_flag = UART_LSR_BI;
+
+ if (--tmout == 0)
+ break;
+ udelay(1);
+ } while ((status & BOTH_EMPTY) != BOTH_EMPTY);
+
+ /* Wait up to 1s for flow control if necessary */
+ if (up->port.flags & UPF_CONS_FLOW) {
+ tmout = 1000000;
+ while (--tmout &&
+ ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
+ udelay(1);
+ }
+}
+
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ *
+ * The console_lock must be held when we get here.
+ */
+static void
+serial8250_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct uart_8250_port *up = &serial8250_ports[co->index];
+ unsigned int ier;
+ int i;
+
+ /*
+ * First save the UER then disable the interrupts
+ */
+ ier = serial_in(up, UART_IER);
+
+ if (up->capabilities & UART_CAP_UUE)
+ serial_out(up, UART_IER, UART_IER_UUE);
+ else
+ serial_out(up, UART_IER, 0);
+
+ /*
+ * Now, do each character
+ */
+ for (i = 0; i < count; i++, s++) {
+ wait_for_xmitr(up);
+
+ /*
+ * Send the character out.
+ * If a LF, also do CR...
+ */
+ serial_out(up, UART_TX, *s);
+ if (*s == 10) {
+ wait_for_xmitr(up);
+ serial_out(up, UART_TX, 13);
+ }
+ }
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the IER
+ */
+ wait_for_xmitr(up);
+ serial_out(up, UART_IER, ier);
+}
+
+static int serial8250_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ if (co->index >= UART_NR)
+ co->index = 0;
+ port = &serial8250_ports[co->index].port;
+ if (!port->iobase && !port->membase)
+ return -ENODEV;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver serial8250_reg;
+static struct console serial8250_console = {
+ .name = "ttyS",
+ .write = serial8250_console_write,
+ .device = uart_console_device,
+ .setup = serial8250_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &serial8250_reg,
+};
+
+static int __init serial8250_console_init(void)
+{
+ serial8250_isa_init_ports();
+ register_console(&serial8250_console);
+ return 0;
+}
+console_initcall(serial8250_console_init);
+
+static int __init find_port(struct uart_port *p)
+{
+ int line;
+ struct uart_port *port;
+
+ for (line = 0; line < UART_NR; line++) {
+ port = &serial8250_ports[line].port;
+ if (p->iotype == port->iotype &&
+ p->iobase == port->iobase &&
+ p->membase == port->membase)
+ return line;
+ }
+ return -ENODEV;
+}
+
+int __init serial8250_start_console(struct uart_port *port, char *options)
+{
+ int line;
+
+ line = find_port(port);
+ if (line < 0)
+ return -ENODEV;
+
+ add_preferred_console("ttyS", line, options);
+ printk("Adding console on ttyS%d at %s 0x%lx (options '%s')\n",
+ line, port->iotype == UPIO_MEM ? "MMIO" : "I/O port",
+ port->iotype == UPIO_MEM ? (unsigned long) port->mapbase :
+ (unsigned long) port->iobase, options);
+ if (!(serial8250_console.flags & CON_ENABLED)) {
+ serial8250_console.flags &= ~CON_PRINTBUFFER;
+ register_console(&serial8250_console);
+ }
+ return line;
+}
+
+#define SERIAL8250_CONSOLE &serial8250_console
+#else
+#define SERIAL8250_CONSOLE NULL
+#endif
+
+static struct uart_driver serial8250_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "serial",
+ .devfs_name = "tts/",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+ .minor = 64,
+ .nr = UART_NR,
+ .cons = SERIAL8250_CONSOLE,
+};
+
+int __init early_serial_setup(struct uart_port *port)
+{
+ if (port->line >= ARRAY_SIZE(serial8250_ports))
+ return -ENODEV;
+
+ serial8250_isa_init_ports();
+ serial8250_ports[port->line].port = *port;
+ serial8250_ports[port->line].port.ops = &serial8250_pops;
+ return 0;
+}
+
+/**
+ * serial8250_suspend_port - suspend one serial port
+ * @line: serial line number
+ * @level: the level of port suspension, as per uart_suspend_port
+ *
+ * Suspend one serial port.
+ */
+void serial8250_suspend_port(int line)
+{
+ uart_suspend_port(&serial8250_reg, &serial8250_ports[line].port);
+}
+
+/**
+ * serial8250_resume_port - resume one serial port
+ * @line: serial line number
+ * @level: the level of port resumption, as per uart_resume_port
+ *
+ * Resume one serial port.
+ */
+void serial8250_resume_port(int line)
+{
+ uart_resume_port(&serial8250_reg, &serial8250_ports[line].port);
+}
+
+/*
+ * Register a set of serial devices attached to a platform device. The
+ * list is terminated with a zero flags entry, which means we expect
+ * all entries to have at least UPF_BOOT_AUTOCONF set.
+ */
+static int __devinit serial8250_probe(struct device *dev)
+{
+ struct plat_serial8250_port *p = dev->platform_data;
+ struct uart_port port;
+
+ memset(&port, 0, sizeof(struct uart_port));
+
+ for (; p && p->flags != 0; p++) {
+ port.iobase = p->iobase;
+ port.membase = p->membase;
+ port.irq = p->irq;
+ port.uartclk = p->uartclk;
+ port.regshift = p->regshift;
+ port.iotype = p->iotype;
+ port.flags = p->flags;
+ port.mapbase = p->mapbase;
+ port.dev = dev;
+ if (share_irqs)
+ port.flags |= UPF_SHARE_IRQ;
+ serial8250_register_port(&port);
+ }
+ return 0;
+}
+
+/*
+ * Remove serial ports registered against a platform device.
+ */
+static int __devexit serial8250_remove(struct device *dev)
+{
+ int i;
+
+ for (i = 0; i < UART_NR; i++) {
+ struct uart_8250_port *up = &serial8250_ports[i];
+
+ if (up->port.dev == dev)
+ serial8250_unregister_port(i);
+ }
+ return 0;
+}
+
+static int serial8250_suspend(struct device *dev, pm_message_t state, u32 level)
+{
+ int i;
+
+ if (level != SUSPEND_DISABLE)
+ return 0;
+
+ for (i = 0; i < UART_NR; i++) {
+ struct uart_8250_port *up = &serial8250_ports[i];
+
+ if (up->port.type != PORT_UNKNOWN && up->port.dev == dev)
+ uart_suspend_port(&serial8250_reg, &up->port);
+ }
+
+ return 0;
+}
+
+static int serial8250_resume(struct device *dev, u32 level)
+{
+ int i;
+
+ if (level != RESUME_ENABLE)
+ return 0;
+
+ for (i = 0; i < UART_NR; i++) {
+ struct uart_8250_port *up = &serial8250_ports[i];
+
+ if (up->port.type != PORT_UNKNOWN && up->port.dev == dev)
+ uart_resume_port(&serial8250_reg, &up->port);
+ }
+
+ return 0;
+}
+
+static struct device_driver serial8250_isa_driver = {
+ .name = "serial8250",
+ .bus = &platform_bus_type,
+ .probe = serial8250_probe,
+ .remove = __devexit_p(serial8250_remove),
+ .suspend = serial8250_suspend,
+ .resume = serial8250_resume,
+};
+
+/*
+ * This "device" covers _all_ ISA 8250-compatible serial devices listed
+ * in the table in include/asm/serial.h
+ */
+static struct platform_device *serial8250_isa_devs;
+
+/*
+ * serial8250_register_port and serial8250_unregister_port allows for
+ * 16x50 serial ports to be configured at run-time, to support PCMCIA
+ * modems and PCI multiport cards.
+ */
+static DECLARE_MUTEX(serial_sem);
+
+static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *port)
+{
+ int i;
+
+ /*
+ * First, find a port entry which matches.
+ */
+ for (i = 0; i < UART_NR; i++)
+ if (uart_match_port(&serial8250_ports[i].port, port))
+ return &serial8250_ports[i];
+
+ /*
+ * We didn't find a matching entry, so look for the first
+ * free entry. We look for one which hasn't been previously
+ * used (indicated by zero iobase).
+ */
+ for (i = 0; i < UART_NR; i++)
+ if (serial8250_ports[i].port.type == PORT_UNKNOWN &&
+ serial8250_ports[i].port.iobase == 0)
+ return &serial8250_ports[i];
+
+ /*
+ * That also failed. Last resort is to find any entry which
+ * doesn't have a real port associated with it.
+ */
+ for (i = 0; i < UART_NR; i++)
+ if (serial8250_ports[i].port.type == PORT_UNKNOWN)
+ return &serial8250_ports[i];
+
+ return NULL;
+}
+
+/**
+ * serial8250_register_port - register a serial port
+ * @port: serial port template
+ *
+ * Configure the serial port specified by the request. If the
+ * port exists and is in use, it is hung up and unregistered
+ * first.
+ *
+ * The port is then probed and if necessary the IRQ is autodetected
+ * If this fails an error is returned.
+ *
+ * On success the port is ready to use and the line number is returned.
+ */
+int serial8250_register_port(struct uart_port *port)
+{
+ struct uart_8250_port *uart;
+ int ret = -ENOSPC;
+
+ if (port->uartclk == 0)
+ return -EINVAL;
+
+ down(&serial_sem);
+
+ uart = serial8250_find_match_or_unused(port);
+ if (uart) {
+ uart_remove_one_port(&serial8250_reg, &uart->port);
+
+ uart->port.iobase = port->iobase;
+ uart->port.membase = port->membase;
+ uart->port.irq = port->irq;
+ uart->port.uartclk = port->uartclk;
+ uart->port.fifosize = port->fifosize;
+ uart->port.regshift = port->regshift;
+ uart->port.iotype = port->iotype;
+ uart->port.flags = port->flags | UPF_BOOT_AUTOCONF;
+ uart->port.mapbase = port->mapbase;
+ if (port->dev)
+ uart->port.dev = port->dev;
+
+ ret = uart_add_one_port(&serial8250_reg, &uart->port);
+ if (ret == 0)
+ ret = uart->port.line;
+ }
+ up(&serial_sem);
+
+ return ret;
+}
+EXPORT_SYMBOL(serial8250_register_port);
+
+/**
+ * serial8250_unregister_port - remove a 16x50 serial port at runtime
+ * @line: serial line number
+ *
+ * Remove one serial port. This may not be called from interrupt
+ * context. We hand the port back to the our control.
+ */
+void serial8250_unregister_port(int line)
+{
+ struct uart_8250_port *uart = &serial8250_ports[line];
+
+ down(&serial_sem);
+ uart_remove_one_port(&serial8250_reg, &uart->port);
+ if (serial8250_isa_devs) {
+ uart->port.flags &= ~UPF_BOOT_AUTOCONF;
+ uart->port.type = PORT_UNKNOWN;
+ uart->port.dev = &serial8250_isa_devs->dev;
+ uart_add_one_port(&serial8250_reg, &uart->port);
+ } else {
+ uart->port.dev = NULL;
+ }
+ up(&serial_sem);
+}
+EXPORT_SYMBOL(serial8250_unregister_port);
+
+static int __init serial8250_init(void)
+{
+ int ret, i;
+
+ printk(KERN_INFO "Serial: 8250/16550 driver $Revision: 1.90 $ "
+ "%d ports, IRQ sharing %sabled\n", (int) UART_NR,
+ share_irqs ? "en" : "dis");
+
+ for (i = 0; i < NR_IRQS; i++)
+ spin_lock_init(&irq_lists[i].lock);
+
+ ret = uart_register_driver(&serial8250_reg);
+ if (ret)
+ goto out;
+
+ serial8250_isa_devs = platform_device_register_simple("serial8250",
+ -1, NULL, 0);
+ if (IS_ERR(serial8250_isa_devs)) {
+ ret = PTR_ERR(serial8250_isa_devs);
+ goto unreg;
+ }
+
+ serial8250_register_ports(&serial8250_reg, &serial8250_isa_devs->dev);
+
+ ret = driver_register(&serial8250_isa_driver);
+ if (ret == 0)
+ goto out;
+
+ platform_device_unregister(serial8250_isa_devs);
+ unreg:
+ uart_unregister_driver(&serial8250_reg);
+ out:
+ return ret;
+}
+
+static void __exit serial8250_exit(void)
+{
+ struct platform_device *isa_dev = serial8250_isa_devs;
+
+ /*
+ * This tells serial8250_unregister_port() not to re-register
+ * the ports (thereby making serial8250_isa_driver permanently
+ * in use.)
+ */
+ serial8250_isa_devs = NULL;
+
+ driver_unregister(&serial8250_isa_driver);
+ platform_device_unregister(isa_dev);
+
+ uart_unregister_driver(&serial8250_reg);
+}
+
+module_init(serial8250_init);
+module_exit(serial8250_exit);
+
+EXPORT_SYMBOL(serial8250_suspend_port);
+EXPORT_SYMBOL(serial8250_resume_port);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Generic 8250/16x50 serial driver $Revision: 1.90 $");
+
+module_param(share_irqs, uint, 0644);
+MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices"
+ " (unsafe)");
+
+#ifdef CONFIG_SERIAL_8250_RSA
+module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444);
+MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA");
+#endif
+MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
+
+/**
+ * register_serial - configure a 16x50 serial port at runtime
+ * @req: request structure
+ *
+ * Configure the serial port specified by the request. If the
+ * port exists and is in use an error is returned. If the port
+ * is not currently in the table it is added.
+ *
+ * The port is then probed and if necessary the IRQ is autodetected
+ * If this fails an error is returned.
+ *
+ * On success the port is ready to use and the line number is returned.
+ */
+int register_serial(struct serial_struct *req)
+{
+ struct uart_port port;
+
+ port.iobase = req->port;
+ port.membase = req->iomem_base;
+ port.irq = req->irq;
+ port.uartclk = req->baud_base * 16;
+ port.fifosize = req->xmit_fifo_size;
+ port.regshift = req->iomem_reg_shift;
+ port.iotype = req->io_type;
+ port.flags = req->flags | UPF_BOOT_AUTOCONF;
+ port.mapbase = req->iomap_base;
+ port.dev = NULL;
+
+ if (share_irqs)
+ port.flags |= UPF_SHARE_IRQ;
+
+ if (HIGH_BITS_OFFSET)
+ port.iobase |= (long) req->port_high << HIGH_BITS_OFFSET;
+
+ /*
+ * If a clock rate wasn't specified by the low level driver, then
+ * default to the standard clock rate. This should be 115200 (*16)
+ * and should not depend on the architecture's BASE_BAUD definition.
+ * However, since this API will be deprecated, it's probably a
+ * better idea to convert the drivers to use the new API
+ * (serial8250_register_port and serial8250_unregister_port).
+ */
+ if (port.uartclk == 0) {
+ printk(KERN_WARNING
+ "Serial: registering port at [%08x,%08lx,%p] irq %d with zero baud_base\n",
+ port.iobase, port.mapbase, port.membase, port.irq);
+ printk(KERN_WARNING "Serial: see %s:%d for more information\n",
+ __FILE__, __LINE__);
+ dump_stack();
+
+ /*
+ * Fix it up for now, but this is only a temporary measure.
+ */
+ port.uartclk = BASE_BAUD * 16;
+ }
+
+ return serial8250_register_port(&port);
+}
+EXPORT_SYMBOL(register_serial);
+
+/**
+ * unregister_serial - remove a 16x50 serial port at runtime
+ * @line: serial line number
+ *
+ * Remove one serial port. This may not be called from interrupt
+ * context. We hand the port back to our local PM control.
+ */
+void unregister_serial(int line)
+{
+ serial8250_unregister_port(line);
+}
+EXPORT_SYMBOL(unregister_serial);
diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h
new file mode 100644
index 00000000000..4f3d62f222f
--- /dev/null
+++ b/drivers/serial/8250.h
@@ -0,0 +1,87 @@
+/*
+ * linux/drivers/char/8250.h
+ *
+ * Driver for 8250/16550-type serial ports
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ * Copyright (C) 2001 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * $Id: 8250.h,v 1.8 2002/07/21 21:32:30 rmk Exp $
+ */
+
+#include <linux/config.h>
+
+int serial8250_register_port(struct uart_port *);
+void serial8250_unregister_port(int line);
+void serial8250_suspend_port(int line);
+void serial8250_resume_port(int line);
+
+struct old_serial_port {
+ unsigned int uart;
+ unsigned int baud_base;
+ unsigned int port;
+ unsigned int irq;
+ unsigned int flags;
+ unsigned char hub6;
+ unsigned char io_type;
+ unsigned char *iomem_base;
+ unsigned short iomem_reg_shift;
+};
+
+/*
+ * This replaces serial_uart_config in include/linux/serial.h
+ */
+struct serial8250_config {
+ const char *name;
+ unsigned short fifo_size;
+ unsigned short tx_loadsz;
+ unsigned char fcr;
+ unsigned int flags;
+};
+
+#define UART_CAP_FIFO (1 << 8) /* UART has FIFO */
+#define UART_CAP_EFR (1 << 9) /* UART has EFR */
+#define UART_CAP_SLEEP (1 << 10) /* UART has IER sleep */
+#define UART_CAP_AFE (1 << 11) /* MCR-based hw flow control */
+#define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */
+
+#if defined(__i386__) && (defined(CONFIG_M386) || defined(CONFIG_M486))
+#define _INLINE_ inline
+#else
+#define _INLINE_
+#endif
+
+#define PROBE_RSA (1 << 0)
+#define PROBE_ANY (~0)
+
+#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
+
+#ifdef CONFIG_SERIAL_8250_SHARE_IRQ
+#define SERIAL8250_SHARE_IRQS 1
+#else
+#define SERIAL8250_SHARE_IRQS 0
+#endif
+
+#if defined(__alpha__) && !defined(CONFIG_PCI)
+/*
+ * Digital did something really horribly wrong with the OUT1 and OUT2
+ * lines on at least some ALPHA's. The failure mode is that if either
+ * is cleared, the machine locks up with endless interrupts.
+ */
+#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1)
+#elif defined(CONFIG_SBC8560)
+/*
+ * WindRiver did something similarly broken on their SBC8560 board. The
+ * UART tristates its IRQ output while OUT2 is clear, but they pulled
+ * the interrupt line _up_ instead of down, so if we register the IRQ
+ * while the UART is in that state, we die in an IRQ storm. */
+#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2)
+#else
+#define ALPHA_KLUDGE_MCR 0
+#endif
diff --git a/drivers/serial/8250_acorn.c b/drivers/serial/8250_acorn.c
new file mode 100644
index 00000000000..32af3650e8b
--- /dev/null
+++ b/drivers/serial/8250_acorn.c
@@ -0,0 +1,142 @@
+/*
+ * linux/drivers/serial/acorn.c
+ *
+ * Copyright (C) 1996-2003 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/tty.h>
+#include <linux/serial_core.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/ecard.h>
+#include <asm/string.h>
+
+#include "8250.h"
+
+#define MAX_PORTS 3
+
+struct serial_card_type {
+ unsigned int num_ports;
+ unsigned int uartclk;
+ unsigned int type;
+ unsigned int offset[MAX_PORTS];
+};
+
+struct serial_card_info {
+ unsigned int num_ports;
+ int ports[MAX_PORTS];
+};
+
+static int __devinit
+serial_card_probe(struct expansion_card *ec, const struct ecard_id *id)
+{
+ struct serial_card_info *info;
+ struct serial_card_type *type = id->data;
+ struct uart_port port;
+ unsigned long bus_addr;
+ unsigned char __iomem *virt_addr;
+ unsigned int i;
+
+ info = kmalloc(sizeof(struct serial_card_info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ memset(info, 0, sizeof(struct serial_card_info));
+ info->num_ports = type->num_ports;
+
+ bus_addr = ecard_resource_start(ec, type->type);
+ virt_addr = ioremap(bus_addr, ecard_resource_len(ec, type->type));
+ if (!virt_addr) {
+ kfree(info);
+ return -ENOMEM;
+ }
+
+ ecard_set_drvdata(ec, info);
+
+ memset(&port, 0, sizeof(struct uart_port));
+ port.irq = ec->irq;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
+ port.uartclk = type->uartclk;
+ port.iotype = UPIO_MEM;
+ port.regshift = 2;
+ port.dev = &ec->dev;
+
+ for (i = 0; i < info->num_ports; i ++) {
+ port.membase = virt_addr + type->offset[i];
+ port.mapbase = bus_addr + type->offset[i];
+
+ info->ports[i] = serial8250_register_port(&port);
+ }
+
+ return 0;
+}
+
+static void __devexit serial_card_remove(struct expansion_card *ec)
+{
+ struct serial_card_info *info = ecard_get_drvdata(ec);
+ int i;
+
+ ecard_set_drvdata(ec, NULL);
+
+ for (i = 0; i < info->num_ports; i++)
+ if (info->ports[i] > 0)
+ serial8250_unregister_port(info->ports[i]);
+
+ kfree(info);
+}
+
+static struct serial_card_type atomwide_type = {
+ .num_ports = 3,
+ .uartclk = 7372800,
+ .type = ECARD_RES_IOCSLOW,
+ .offset = { 0x2800, 0x2400, 0x2000 },
+};
+
+static struct serial_card_type serport_type = {
+ .num_ports = 2,
+ .uartclk = 3686400,
+ .type = ECARD_RES_IOCSLOW,
+ .offset = { 0x2000, 0x2020 },
+};
+
+static const struct ecard_id serial_cids[] = {
+ { MANU_ATOMWIDE, PROD_ATOMWIDE_3PSERIAL, &atomwide_type },
+ { MANU_SERPORT, PROD_SERPORT_DSPORT, &serport_type },
+ { 0xffff, 0xffff }
+};
+
+static struct ecard_driver serial_card_driver = {
+ .probe = serial_card_probe,
+ .remove = __devexit_p(serial_card_remove),
+ .id_table = serial_cids,
+ .drv = {
+ .name = "8250_acorn",
+ },
+};
+
+static int __init serial_card_init(void)
+{
+ return ecard_register_driver(&serial_card_driver);
+}
+
+static void __exit serial_card_exit(void)
+{
+ ecard_remove_driver(&serial_card_driver);
+}
+
+MODULE_AUTHOR("Russell King");
+MODULE_DESCRIPTION("Acorn 8250-compatible serial port expansion card driver");
+MODULE_LICENSE("GPL");
+
+module_init(serial_card_init);
+module_exit(serial_card_exit);
diff --git a/drivers/serial/8250_acpi.c b/drivers/serial/8250_acpi.c
new file mode 100644
index 00000000000..6b9ead28851
--- /dev/null
+++ b/drivers/serial/8250_acpi.c
@@ -0,0 +1,171 @@
+/*
+ * Copyright (c) 2002-2003 Matthew Wilcox for Hewlett-Packard
+ * Copyright (C) 2004 Hewlett-Packard Co
+ * Bjorn Helgaas <bjorn.helgaas@hp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/acpi.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/serial_core.h>
+
+#include <acpi/acpi_bus.h>
+
+#include <asm/io.h>
+
+#include "8250.h"
+
+struct serial_private {
+ int line;
+};
+
+static acpi_status acpi_serial_mmio(struct uart_port *port,
+ struct acpi_resource_address64 *addr)
+{
+ port->mapbase = addr->min_address_range;
+ port->iotype = UPIO_MEM;
+ port->flags |= UPF_IOREMAP;
+ return AE_OK;
+}
+
+static acpi_status acpi_serial_port(struct uart_port *port,
+ struct acpi_resource_io *io)
+{
+ if (io->range_length) {
+ port->iobase = io->min_base_address;
+ port->iotype = UPIO_PORT;
+ } else
+ printk(KERN_ERR "%s: zero-length IO port range?\n", __FUNCTION__);
+ return AE_OK;
+}
+
+static acpi_status acpi_serial_ext_irq(struct uart_port *port,
+ struct acpi_resource_ext_irq *ext_irq)
+{
+ if (ext_irq->number_of_interrupts > 0)
+ port->irq = acpi_register_gsi(ext_irq->interrupts[0],
+ ext_irq->edge_level, ext_irq->active_high_low);
+ return AE_OK;
+}
+
+static acpi_status acpi_serial_irq(struct uart_port *port,
+ struct acpi_resource_irq *irq)
+{
+ if (irq->number_of_interrupts > 0)
+ port->irq = acpi_register_gsi(irq->interrupts[0],
+ irq->edge_level, irq->active_high_low);
+ return AE_OK;
+}
+
+static acpi_status acpi_serial_resource(struct acpi_resource *res, void *data)
+{
+ struct uart_port *port = (struct uart_port *) data;
+ struct acpi_resource_address64 addr;
+ acpi_status status;
+
+ status = acpi_resource_to_address64(res, &addr);
+ if (ACPI_SUCCESS(status))
+ return acpi_serial_mmio(port, &addr);
+ else if (res->id == ACPI_RSTYPE_IO)
+ return acpi_serial_port(port, &res->data.io);
+ else if (res->id == ACPI_RSTYPE_EXT_IRQ)
+ return acpi_serial_ext_irq(port, &res->data.extended_irq);
+ else if (res->id == ACPI_RSTYPE_IRQ)
+ return acpi_serial_irq(port, &res->data.irq);
+ return AE_OK;
+}
+
+static int acpi_serial_add(struct acpi_device *device)
+{
+ struct serial_private *priv;
+ acpi_status status;
+ struct uart_port port;
+ int result;
+
+ memset(&port, 0, sizeof(struct uart_port));
+
+ port.uartclk = 1843200;
+ port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
+
+ priv = kmalloc(sizeof(struct serial_private), GFP_KERNEL);
+ if (!priv) {
+ result = -ENOMEM;
+ goto fail;
+ }
+ memset(priv, 0, sizeof(*priv));
+
+ status = acpi_walk_resources(device->handle, METHOD_NAME__CRS,
+ acpi_serial_resource, &port);
+ if (ACPI_FAILURE(status)) {
+ result = -ENODEV;
+ goto fail;
+ }
+
+ if (!port.mapbase && !port.iobase) {
+ printk(KERN_ERR "%s: no iomem or port address in %s _CRS\n",
+ __FUNCTION__, device->pnp.bus_id);
+ result = -ENODEV;
+ goto fail;
+ }
+
+ priv->line = serial8250_register_port(&port);
+ if (priv->line < 0) {
+ printk(KERN_WARNING "Couldn't register serial port %s: %d\n",
+ device->pnp.bus_id, priv->line);
+ result = -ENODEV;
+ goto fail;
+ }
+
+ acpi_driver_data(device) = priv;
+ return 0;
+
+fail:
+ kfree(priv);
+
+ return result;
+}
+
+static int acpi_serial_remove(struct acpi_device *device, int type)
+{
+ struct serial_private *priv;
+
+ if (!device || !acpi_driver_data(device))
+ return -EINVAL;
+
+ priv = acpi_driver_data(device);
+ serial8250_unregister_port(priv->line);
+ kfree(priv);
+
+ return 0;
+}
+
+static struct acpi_driver acpi_serial_driver = {
+ .name = "serial",
+ .class = "",
+ .ids = "PNP0501",
+ .ops = {
+ .add = acpi_serial_add,
+ .remove = acpi_serial_remove,
+ },
+};
+
+static int __init acpi_serial_init(void)
+{
+ return acpi_bus_register_driver(&acpi_serial_driver);
+}
+
+static void __exit acpi_serial_exit(void)
+{
+ acpi_bus_unregister_driver(&acpi_serial_driver);
+}
+
+module_init(acpi_serial_init);
+module_exit(acpi_serial_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Generic 8250/16x50 ACPI serial driver");
diff --git a/drivers/serial/8250_early.c b/drivers/serial/8250_early.c
new file mode 100644
index 00000000000..b7a5dd71022
--- /dev/null
+++ b/drivers/serial/8250_early.c
@@ -0,0 +1,255 @@
+/*
+ * Early serial console for 8250/16550 devices
+ *
+ * (c) Copyright 2004 Hewlett-Packard Development Company, L.P.
+ * Bjorn Helgaas <bjorn.helgaas@hp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Based on the 8250.c serial driver, Copyright (C) 2001 Russell King,
+ * and on early_printk.c by Andi Kleen.
+ *
+ * This is for use before the serial driver has initialized, in
+ * particular, before the UARTs have been discovered and named.
+ * Instead of specifying the console device as, e.g., "ttyS0",
+ * we locate the device directly by its MMIO or I/O port address.
+ *
+ * The user can specify the device directly, e.g.,
+ * console=uart,io,0x3f8,9600n8
+ * console=uart,mmio,0xff5e0000,115200n8
+ * or platform code can call early_uart_console_init() to set
+ * the early UART device.
+ *
+ * After the normal serial driver starts, we try to locate the
+ * matching ttyS device and start a console there.
+ */
+
+#include <linux/tty.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <linux/serial.h>
+#include <asm/io.h>
+#include <asm/serial.h>
+
+struct early_uart_device {
+ struct uart_port port;
+ char options[16]; /* e.g., 115200n8 */
+ unsigned int baud;
+};
+
+static struct early_uart_device early_device __initdata;
+static int early_uart_registered __initdata;
+
+static unsigned int __init serial_in(struct uart_port *port, int offset)
+{
+ if (port->iotype == UPIO_MEM)
+ return readb(port->membase + offset);
+ else
+ return inb(port->iobase + offset);
+}
+
+static void __init serial_out(struct uart_port *port, int offset, int value)
+{
+ if (port->iotype == UPIO_MEM)
+ writeb(value, port->membase + offset);
+ else
+ outb(value, port->iobase + offset);
+}
+
+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+
+static void __init wait_for_xmitr(struct uart_port *port)
+{
+ unsigned int status;
+
+ for (;;) {
+ status = serial_in(port, UART_LSR);
+ if ((status & BOTH_EMPTY) == BOTH_EMPTY)
+ return;
+ cpu_relax();
+ }
+}
+
+static void __init putc(struct uart_port *port, unsigned char c)
+{
+ wait_for_xmitr(port);
+ serial_out(port, UART_TX, c);
+}
+
+static void __init early_uart_write(struct console *console, const char *s, unsigned int count)
+{
+ struct uart_port *port = &early_device.port;
+ unsigned int ier;
+
+ /* Save the IER and disable interrupts */
+ ier = serial_in(port, UART_IER);
+ serial_out(port, UART_IER, 0);
+
+ while (*s && count-- > 0) {
+ putc(port, *s);
+ if (*s == '\n')
+ putc(port, '\r');
+ s++;
+ }
+
+ /* Wait for transmitter to become empty and restore the IER */
+ wait_for_xmitr(port);
+ serial_out(port, UART_IER, ier);
+}
+
+static unsigned int __init probe_baud(struct uart_port *port)
+{
+ unsigned char lcr, dll, dlm;
+ unsigned int quot;
+
+ lcr = serial_in(port, UART_LCR);
+ serial_out(port, UART_LCR, lcr | UART_LCR_DLAB);
+ dll = serial_in(port, UART_DLL);
+ dlm = serial_in(port, UART_DLM);
+ serial_out(port, UART_LCR, lcr);
+
+ quot = (dlm << 8) | dll;
+ return (port->uartclk / 16) / quot;
+}
+
+static void __init init_port(struct early_uart_device *device)
+{
+ struct uart_port *port = &device->port;
+ unsigned int divisor;
+ unsigned char c;
+
+ serial_out(port, UART_LCR, 0x3); /* 8n1 */
+ serial_out(port, UART_IER, 0); /* no interrupt */
+ serial_out(port, UART_FCR, 0); /* no fifo */
+ serial_out(port, UART_MCR, 0x3); /* DTR + RTS */
+
+ divisor = port->uartclk / (16 * device->baud);
+ c = serial_in(port, UART_LCR);
+ serial_out(port, UART_LCR, c | UART_LCR_DLAB);
+ serial_out(port, UART_DLL, divisor & 0xff);
+ serial_out(port, UART_DLM, (divisor >> 8) & 0xff);
+ serial_out(port, UART_LCR, c & ~UART_LCR_DLAB);
+}
+
+static int __init parse_options(struct early_uart_device *device, char *options)
+{
+ struct uart_port *port = &device->port;
+ int mapsize = 64;
+ int mmio, length;
+
+ if (!options)
+ return -ENODEV;
+
+ port->uartclk = BASE_BAUD * 16;
+ if (!strncmp(options, "mmio,", 5)) {
+ port->iotype = UPIO_MEM;
+ port->mapbase = simple_strtoul(options + 5, &options, 0);
+ port->membase = ioremap(port->mapbase, mapsize);
+ if (!port->membase) {
+ printk(KERN_ERR "%s: Couldn't ioremap 0x%lx\n",
+ __FUNCTION__, port->mapbase);
+ return -ENOMEM;
+ }
+ mmio = 1;
+ } else if (!strncmp(options, "io,", 3)) {
+ port->iotype = UPIO_PORT;
+ port->iobase = simple_strtoul(options + 3, &options, 0);
+ mmio = 0;
+ } else
+ return -EINVAL;
+
+ if ((options = strchr(options, ','))) {
+ options++;
+ device->baud = simple_strtoul(options, 0, 0);
+ length = min(strcspn(options, " "), sizeof(device->options));
+ strncpy(device->options, options, length);
+ } else {
+ device->baud = probe_baud(port);
+ snprintf(device->options, sizeof(device->options), "%u",
+ device->baud);
+ }
+
+ printk(KERN_INFO "Early serial console at %s 0x%lx (options '%s')\n",
+ mmio ? "MMIO" : "I/O port",
+ mmio ? port->mapbase : (unsigned long) port->iobase,
+ device->options);
+ return 0;
+}
+
+static int __init early_uart_setup(struct console *console, char *options)
+{
+ struct early_uart_device *device = &early_device;
+ int err;
+
+ if (device->port.membase || device->port.iobase)
+ return 0;
+
+ if ((err = parse_options(device, options)) < 0)
+ return err;
+
+ init_port(device);
+ return 0;
+}
+
+static struct console early_uart_console __initdata = {
+ .name = "uart",
+ .write = early_uart_write,
+ .setup = early_uart_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+
+static int __init early_uart_console_init(void)
+{
+ if (!early_uart_registered) {
+ register_console(&early_uart_console);
+ early_uart_registered = 1;
+ }
+ return 0;
+}
+console_initcall(early_uart_console_init);
+
+int __init early_serial_console_init(char *cmdline)
+{
+ char *options;
+ int err;
+
+ options = strstr(cmdline, "console=uart,");
+ if (!options)
+ return -ENODEV;
+
+ options = strchr(cmdline, ',') + 1;
+ if ((err = early_uart_setup(NULL, options)) < 0)
+ return err;
+ return early_uart_console_init();
+}
+
+static int __init early_uart_console_switch(void)
+{
+ struct early_uart_device *device = &early_device;
+ struct uart_port *port = &device->port;
+ int mmio, line;
+
+ if (!(early_uart_console.flags & CON_ENABLED))
+ return 0;
+
+ /* Try to start the normal driver on a matching line. */
+ mmio = (port->iotype == UPIO_MEM);
+ line = serial8250_start_console(port, device->options);
+ if (line < 0)
+ printk("No ttyS device at %s 0x%lx for console\n",
+ mmio ? "MMIO" : "I/O port",
+ mmio ? port->mapbase :
+ (unsigned long) port->iobase);
+
+ unregister_console(&early_uart_console);
+ if (mmio)
+ iounmap(port->membase);
+
+ return 0;
+}
+late_initcall(early_uart_console_switch);
diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c
new file mode 100644
index 00000000000..431aa5761a7
--- /dev/null
+++ b/drivers/serial/8250_gsc.c
@@ -0,0 +1,120 @@
+/*
+ * Serial Device Initialisation for Lasi/Asp/Wax/Dino
+ *
+ * (c) Copyright Matthew Wilcox <willy@debian.org> 2001-2002
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/serial_core.h>
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include <asm/hardware.h>
+#include <asm/parisc-device.h>
+#include <asm/io.h>
+#include <asm/serial.h> /* for LASI_BASE_BAUD */
+
+#include "8250.h"
+
+static int __init
+serial_init_chip(struct parisc_device *dev)
+{
+ static int serial_line_nr;
+ struct uart_port port;
+ unsigned long address;
+ int err;
+
+ if (!dev->irq) {
+ /* We find some unattached serial ports by walking native
+ * busses. These should be silently ignored. Otherwise,
+ * what we have here is a missing parent device, so tell
+ * the user what they're missing.
+ */
+ if (parisc_parent(dev)->id.hw_type != HPHW_IOA) {
+ printk(KERN_INFO "Serial: device 0x%lx not configured.\n"
+ "Enable support for Wax, Lasi, Asp or Dino.\n", dev->hpa);
+ }
+ return -ENODEV;
+ }
+
+ address = dev->hpa;
+ if (dev->id.sversion != 0x8d) {
+ address += 0x800;
+ }
+
+ memset(&port, 0, sizeof(struct uart_port));
+ port.mapbase = address;
+ port.irq = dev->irq;
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
+ port.uartclk = LASI_BASE_BAUD * 16;
+ port.dev = &dev->dev;
+
+ err = serial8250_register_port(&port);
+ if (err < 0) {
+ printk(KERN_WARNING "serial8250_register_port returned error %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static struct parisc_device_id serial_tbl[] = {
+ { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00075 },
+ { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008c },
+ { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008d },
+ { 0 }
+};
+
+/* Hack. Some machines have SERIAL_0 attached to Lasi and SERIAL_1
+ * attached to Dino. Unfortunately, Dino appears before Lasi in the device
+ * tree. To ensure that ttyS0 == SERIAL_0, we register two drivers; one
+ * which only knows about Lasi and then a second which will find all the
+ * other serial ports. HPUX ignores this problem.
+ */
+static struct parisc_device_id lasi_tbl[] = {
+ { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03B, 0x0008C }, /* C1xx/C1xxL */
+ { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03C, 0x0008C }, /* B132L */
+ { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03D, 0x0008C }, /* B160L */
+ { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03E, 0x0008C }, /* B132L+ */
+ { HPHW_FIO, HVERSION_REV_ANY_ID, 0x03F, 0x0008C }, /* B180L+ */
+ { HPHW_FIO, HVERSION_REV_ANY_ID, 0x046, 0x0008C }, /* Rocky2 120 */
+ { HPHW_FIO, HVERSION_REV_ANY_ID, 0x047, 0x0008C }, /* Rocky2 150 */
+ { HPHW_FIO, HVERSION_REV_ANY_ID, 0x04E, 0x0008C }, /* Kiji L2 132 */
+ { HPHW_FIO, HVERSION_REV_ANY_ID, 0x056, 0x0008C }, /* Raven+ */
+ { 0 }
+};
+
+
+MODULE_DEVICE_TABLE(parisc, serial_tbl);
+
+static struct parisc_driver lasi_driver = {
+ .name = "serial_1",
+ .id_table = lasi_tbl,
+ .probe = serial_init_chip,
+};
+
+static struct parisc_driver serial_driver = {
+ .name = "serial",
+ .id_table = serial_tbl,
+ .probe = serial_init_chip,
+};
+
+int __init probe_serial_gsc(void)
+{
+ register_parisc_driver(&lasi_driver);
+ register_parisc_driver(&serial_driver);
+ return 0;
+}
+
+module_init(probe_serial_gsc);
diff --git a/drivers/serial/8250_hp300.c b/drivers/serial/8250_hp300.c
new file mode 100644
index 00000000000..b8d51eb56bf
--- /dev/null
+++ b/drivers/serial/8250_hp300.c
@@ -0,0 +1,329 @@
+/*
+ * Driver for the 98626/98644/internal serial interface on hp300/hp400
+ * (based on the National Semiconductor INS8250/NS16550AF/WD16C552 UARTs)
+ *
+ * Ported from 2.2 and modified to use the normal 8250 driver
+ * by Kars de Jong <jongk@linux-m68k.org>, May 2004.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serialP.h>
+#include <linux/serial_core.h>
+#include <linux/delay.h>
+#include <linux/dio.h>
+#include <linux/console.h>
+#include <asm/io.h>
+
+#if !defined(CONFIG_HPDCA) && !defined(CONFIG_HPAPCI)
+#warning CONFIG_8250 defined but neither CONFIG_HPDCA nor CONFIG_HPAPCI defined, are you sure?
+#endif
+
+#ifdef CONFIG_HPAPCI
+struct hp300_port
+{
+ struct hp300_port *next; /* next port */
+ int line; /* line (tty) number */
+};
+
+static struct hp300_port *hp300_ports;
+#endif
+
+#ifdef CONFIG_HPDCA
+
+static int __devinit hpdca_init_one(struct dio_dev *d,
+ const struct dio_device_id *ent);
+static void __devexit hpdca_remove_one(struct dio_dev *d);
+
+static struct dio_device_id hpdca_dio_tbl[] = {
+ { DIO_ID_DCA0 },
+ { DIO_ID_DCA0REM },
+ { DIO_ID_DCA1 },
+ { DIO_ID_DCA1REM },
+ { 0 }
+};
+
+static struct dio_driver hpdca_driver = {
+ .name = "hpdca",
+ .id_table = hpdca_dio_tbl,
+ .probe = hpdca_init_one,
+ .remove = __devexit_p(hpdca_remove_one),
+};
+
+#endif
+
+extern int hp300_uart_scode;
+
+/* Offset to UART registers from base of DCA */
+#define UART_OFFSET 17
+
+#define DCA_ID 0x01 /* ID (read), reset (write) */
+#define DCA_IC 0x03 /* Interrupt control */
+
+/* Interrupt control */
+#define DCA_IC_IE 0x80 /* Master interrupt enable */
+
+#define HPDCA_BAUD_BASE 153600
+
+/* Base address of the Frodo part */
+#define FRODO_BASE (0x41c000)
+
+/*
+ * Where we find the 8250-like APCI ports, and how far apart they are.
+ */
+#define FRODO_APCIBASE 0x0
+#define FRODO_APCISPACE 0x20
+#define FRODO_APCI_OFFSET(x) (FRODO_APCIBASE + ((x) * FRODO_APCISPACE))
+
+#define HPAPCI_BAUD_BASE 500400
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+/*
+ * Parse the bootinfo to find descriptions for headless console and
+ * debug serial ports and register them with the 8250 driver.
+ * This function should be called before serial_console_init() is called
+ * to make sure the serial console will be available for use. IA-64 kernel
+ * calls this function from setup_arch() after the EFI and ACPI tables have
+ * been parsed.
+ */
+int __init hp300_setup_serial_console(void)
+{
+ int scode;
+ struct uart_port port;
+
+ memset(&port, 0, sizeof(port));
+
+ if (hp300_uart_scode < 0 || hp300_uart_scode > DIO_SCMAX)
+ return 0;
+
+ if (DIO_SCINHOLE(hp300_uart_scode))
+ return 0;
+
+ scode = hp300_uart_scode;
+
+ /* Memory mapped I/O */
+ port.iotype = UPIO_MEM;
+ port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF;
+ port.type = PORT_UNKNOWN;
+
+ /* Check for APCI console */
+ if (scode == 256) {
+#ifdef CONFIG_HPAPCI
+ printk(KERN_INFO "Serial console is HP APCI 1\n");
+
+ port.uartclk = HPAPCI_BAUD_BASE * 16;
+ port.mapbase = (FRODO_BASE + FRODO_APCI_OFFSET(1));
+ port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE);
+ port.regshift = 2;
+ add_preferred_console("ttyS", port.line, "9600n8");
+#else
+ printk(KERN_WARNING "Serial console is APCI but support is disabled (CONFIG_HPAPCI)!\n");
+ return 0;
+#endif
+ }
+ else {
+#ifdef CONFIG_HPDCA
+ unsigned long pa = dio_scodetophysaddr(scode);
+ if (!pa) {
+ return 0;
+ }
+
+ printk(KERN_INFO "Serial console is HP DCA at select code %d\n", scode);
+
+ port.uartclk = HPDCA_BAUD_BASE * 16;
+ port.mapbase = (pa + UART_OFFSET);
+ port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE);
+ port.regshift = 1;
+ port.irq = DIO_IPL(pa + DIO_VIRADDRBASE);
+
+ /* Enable board-interrupts */
+ out_8(pa + DIO_VIRADDRBASE + DCA_IC, DCA_IC_IE);
+
+ if (DIO_ID(pa + DIO_VIRADDRBASE) & 0x80) {
+ add_preferred_console("ttyS", port.line, "9600n8");
+ }
+#else
+ printk(KERN_WARNING "Serial console is DCA but support is disabled (CONFIG_HPDCA)!\n");
+ return 0;
+#endif
+ }
+
+ if (early_serial_setup(&port) < 0) {
+ printk(KERN_WARNING "hp300_setup_serial_console(): early_serial_setup() failed.\n");
+ }
+
+ return 0;
+}
+#endif /* CONFIG_SERIAL_8250_CONSOLE */
+
+#ifdef CONFIG_HPDCA
+static int __devinit hpdca_init_one(struct dio_dev *d,
+ const struct dio_device_id *ent)
+{
+ struct serial_struct serial_req;
+ int line;
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ if (hp300_uart_scode == d->scode) {
+ /* Already got it. */
+ return 0;
+ }
+#endif
+ memset(&serial_req, 0, sizeof(struct serial_struct));
+
+ /* Memory mapped I/O */
+ serial_req.io_type = SERIAL_IO_MEM;
+ serial_req.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF;
+ serial_req.irq = d->ipl;
+ serial_req.baud_base = HPDCA_BAUD_BASE;
+ serial_req.iomap_base = (d->resource.start + UART_OFFSET);
+ serial_req.iomem_base = (char *)(serial_req.iomap_base + DIO_VIRADDRBASE);
+ serial_req.iomem_reg_shift = 1;
+ line = register_serial(&serial_req);
+
+ if (line < 0) {
+ printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d"
+ " irq %d failed\n", d->scode, serial_req.irq);
+ return -ENOMEM;
+ }
+
+ /* Enable board-interrupts */
+ out_8(d->resource.start + DIO_VIRADDRBASE + DCA_IC, DCA_IC_IE);
+ dio_set_drvdata(d, (void *)line);
+
+ /* Reset the DCA */
+ out_8(d->resource.start + DIO_VIRADDRBASE + DCA_ID, 0xff);
+ udelay(100);
+
+ return 0;
+}
+#endif
+
+static int __init hp300_8250_init(void)
+{
+ static int called = 0;
+ int num_ports;
+#ifdef CONFIG_HPAPCI
+ int line;
+ unsigned long base;
+ struct serial_struct serial_req;
+ struct hp300_port *port;
+ int i;
+#endif
+ if (called)
+ return -ENODEV;
+ called = 1;
+
+ if (!MACH_IS_HP300)
+ return -ENODEV;
+
+ num_ports = 0;
+
+#ifdef CONFIG_HPDCA
+ if (dio_module_init(&hpdca_driver) == 0)
+ num_ports++;
+#endif
+#ifdef CONFIG_HPAPCI
+ if (hp300_model < HP_400) {
+ if (!num_ports)
+ return -ENODEV;
+ return 0;
+ }
+ /* These models have the Frodo chip.
+ * Port 0 is reserved for the Apollo Domain keyboard.
+ * Port 1 is either the console or the DCA.
+ */
+ for (i = 1; i < 4; i++) {
+ /* Port 1 is the console on a 425e, on other machines it's mapped to
+ * DCA.
+ */
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+ if (i == 1) {
+ continue;
+ }
+#endif
+
+ /* Create new serial device */
+ port = kmalloc(sizeof(struct hp300_port), GFP_KERNEL);
+ if (!port)
+ return -ENOMEM;
+
+ memset(&serial_req, 0, sizeof(struct serial_struct));
+
+ base = (FRODO_BASE + FRODO_APCI_OFFSET(i));
+
+ /* Memory mapped I/O */
+ serial_req.io_type = SERIAL_IO_MEM;
+ serial_req.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF;
+ /* XXX - no interrupt support yet */
+ serial_req.irq = 0;
+ serial_req.baud_base = HPAPCI_BAUD_BASE;
+ serial_req.iomap_base = base;
+ serial_req.iomem_base = (char *)(serial_req.iomap_base + DIO_VIRADDRBASE);
+ serial_req.iomem_reg_shift = 2;
+
+ line = register_serial(&serial_req);
+
+ if (line < 0) {
+ printk(KERN_NOTICE "8250_hp300: register_serial() APCI %d"
+ " irq %d failed\n", i, serial_req.irq);
+ kfree(port);
+ continue;
+ }
+
+ port->line = line;
+ port->next = hp300_ports;
+ hp300_ports = port;
+
+ num_ports++;
+ }
+#endif
+
+ /* Any boards found? */
+ if (!num_ports)
+ return -ENODEV;
+
+ return 0;
+}
+
+#ifdef CONFIG_HPDCA
+static void __devexit hpdca_remove_one(struct dio_dev *d)
+{
+ int line;
+
+ line = (int) dio_get_drvdata(d);
+ if (d->resource.start) {
+ /* Disable board-interrupts */
+ out_8(d->resource.start + DIO_VIRADDRBASE + DCA_IC, 0);
+ }
+ unregister_serial(line);
+}
+#endif
+
+static void __exit hp300_8250_exit(void)
+{
+#ifdef CONFIG_HPAPCI
+ struct hp300_port *port, *to_free;
+
+ for (port = hp300_ports; port; ) {
+ unregister_serial(port->line);
+ to_free = port;
+ port = port->next;
+ kfree(to_free);
+ }
+
+ hp300_ports = NULL;
+#endif
+#ifdef CONFIG_HPDCA
+ dio_unregister_driver(&hpdca_driver);
+#endif
+}
+
+module_init(hp300_8250_init);
+module_exit(hp300_8250_exit);
+MODULE_DESCRIPTION("HP DCA/APCI serial driver");
+MODULE_AUTHOR("Kars de Jong <jongk@linux-m68k.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
new file mode 100644
index 00000000000..f8d90d0ecfe
--- /dev/null
+++ b/drivers/serial/8250_pci.c
@@ -0,0 +1,2303 @@
+/*
+ * linux/drivers/char/8250_pci.c
+ *
+ * Probe module for 8250/16550-type PCI serial ports.
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ * Copyright (C) 2001 Russell King, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ * $Id: 8250_pci.c,v 1.28 2002/11/02 11:14:18 rmk Exp $
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/tty.h>
+#include <linux/serial_core.h>
+#include <linux/8250_pci.h>
+#include <linux/bitops.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+
+#include "8250.h"
+
+#undef SERIAL_DEBUG_PCI
+
+/*
+ * Definitions for PCI support.
+ */
+#define FL_BASE_MASK 0x0007
+#define FL_BASE0 0x0000
+#define FL_BASE1 0x0001
+#define FL_BASE2 0x0002
+#define FL_BASE3 0x0003
+#define FL_BASE4 0x0004
+#define FL_GET_BASE(x) (x & FL_BASE_MASK)
+
+/* Use successive BARs (PCI base address registers),
+ else use offset into some specified BAR */
+#define FL_BASE_BARS 0x0008
+
+/* do not assign an irq */
+#define FL_NOIRQ 0x0080
+
+/* Use the Base address register size to cap number of ports */
+#define FL_REGION_SZ_CAP 0x0100
+
+struct pci_board {
+ unsigned int flags;
+ unsigned int num_ports;
+ unsigned int base_baud;
+ unsigned int uart_offset;
+ unsigned int reg_shift;
+ unsigned int first_offset;
+};
+
+/*
+ * init function returns:
+ * > 0 - number of ports
+ * = 0 - use board->num_ports
+ * < 0 - error
+ */
+struct pci_serial_quirk {
+ u32 vendor;
+ u32 device;
+ u32 subvendor;
+ u32 subdevice;
+ int (*init)(struct pci_dev *dev);
+ int (*setup)(struct pci_dev *dev, struct pci_board *board,
+ struct uart_port *port, int idx);
+ void (*exit)(struct pci_dev *dev);
+};
+
+#define PCI_NUM_BAR_RESOURCES 6
+
+struct serial_private {
+ unsigned int nr;
+ void __iomem *remapped_bar[PCI_NUM_BAR_RESOURCES];
+ struct pci_serial_quirk *quirk;
+ int line[0];
+};
+
+static void moan_device(const char *str, struct pci_dev *dev)
+{
+ printk(KERN_WARNING "%s: %s\n"
+ KERN_WARNING "Please send the output of lspci -vv, this\n"
+ KERN_WARNING "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
+ KERN_WARNING "manufacturer and name of serial board or\n"
+ KERN_WARNING "modem board to rmk+serial@arm.linux.org.uk.\n",
+ pci_name(dev), str, dev->vendor, dev->device,
+ dev->subsystem_vendor, dev->subsystem_device);
+}
+
+static int
+setup_port(struct pci_dev *dev, struct uart_port *port,
+ int bar, int offset, int regshift)
+{
+ struct serial_private *priv = pci_get_drvdata(dev);
+ unsigned long base, len;
+
+ if (bar >= PCI_NUM_BAR_RESOURCES)
+ return -EINVAL;
+
+ if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) {
+ base = pci_resource_start(dev, bar);
+ len = pci_resource_len(dev, bar);
+
+ if (!priv->remapped_bar[bar])
+ priv->remapped_bar[bar] = ioremap(base, len);
+ if (!priv->remapped_bar[bar])
+ return -ENOMEM;
+
+ port->iotype = UPIO_MEM;
+ port->mapbase = base + offset;
+ port->membase = priv->remapped_bar[bar] + offset;
+ port->regshift = regshift;
+ } else {
+ base = pci_resource_start(dev, bar) + offset;
+ port->iotype = UPIO_PORT;
+ port->iobase = base;
+ }
+ return 0;
+}
+
+/*
+ * AFAVLAB uses a different mixture of BARs and offsets
+ * Not that ugly ;) -- HW
+ */
+static int
+afavlab_setup(struct pci_dev *dev, struct pci_board *board,
+ struct uart_port *port, int idx)
+{
+ unsigned int bar, offset = board->first_offset;
+
+ bar = FL_GET_BASE(board->flags);
+ if (idx < 4)
+ bar += idx;
+ else {
+ bar = 4;
+ offset += (idx - 4) * board->uart_offset;
+ }
+
+ return setup_port(dev, port, bar, offset, board->reg_shift);
+}
+
+/*
+ * HP's Remote Management Console. The Diva chip came in several
+ * different versions. N-class, L2000 and A500 have two Diva chips, each
+ * with 3 UARTs (the third UART on the second chip is unused). Superdome
+ * and Keystone have one Diva chip with 3 UARTs. Some later machines have
+ * one Diva chip, but it has been expanded to 5 UARTs.
+ */
+static int __devinit pci_hp_diva_init(struct pci_dev *dev)
+{
+ int rc = 0;
+
+ switch (dev->subsystem_device) {
+ case PCI_DEVICE_ID_HP_DIVA_TOSCA1:
+ case PCI_DEVICE_ID_HP_DIVA_HALFDOME:
+ case PCI_DEVICE_ID_HP_DIVA_KEYSTONE:
+ case PCI_DEVICE_ID_HP_DIVA_EVEREST:
+ rc = 3;
+ break;
+ case PCI_DEVICE_ID_HP_DIVA_TOSCA2:
+ rc = 2;
+ break;
+ case PCI_DEVICE_ID_HP_DIVA_MAESTRO:
+ rc = 4;
+ break;
+ case PCI_DEVICE_ID_HP_DIVA_POWERBAR:
+ rc = 1;
+ break;
+ }
+
+ return rc;
+}
+
+/*
+ * HP's Diva chip puts the 4th/5th serial port further out, and
+ * some serial ports are supposed to be hidden on certain models.
+ */
+static int
+pci_hp_diva_setup(struct pci_dev *dev, struct pci_board *board,
+ struct uart_port *port, int idx)
+{
+ unsigned int offset = board->first_offset;
+ unsigned int bar = FL_GET_BASE(board->flags);
+
+ switch (dev->subsystem_device) {
+ case PCI_DEVICE_ID_HP_DIVA_MAESTRO:
+ if (idx == 3)
+ idx++;
+ break;
+ case PCI_DEVICE_ID_HP_DIVA_EVEREST:
+ if (idx > 0)
+ idx++;
+ if (idx > 2)
+ idx++;
+ break;
+ }
+ if (idx > 2)
+ offset = 0x18;
+
+ offset += idx * board->uart_offset;
+
+ return setup_port(dev, port, bar, offset, board->reg_shift);
+}
+
+/*
+ * Added for EKF Intel i960 serial boards
+ */
+static int __devinit pci_inteli960ni_init(struct pci_dev *dev)
+{
+ unsigned long oldval;
+
+ if (!(dev->subsystem_device & 0x1000))
+ return -ENODEV;
+
+ /* is firmware started? */
+ pci_read_config_dword(dev, 0x44, (void*) &oldval);
+ if (oldval == 0x00001000L) { /* RESET value */
+ printk(KERN_DEBUG "Local i960 firmware missing");
+ return -ENODEV;
+ }
+ return 0;
+}
+
+/*
+ * Some PCI serial cards using the PLX 9050 PCI interface chip require
+ * that the card interrupt be explicitly enabled or disabled. This
+ * seems to be mainly needed on card using the PLX which also use I/O
+ * mapped memory.
+ */
+static int __devinit pci_plx9050_init(struct pci_dev *dev)
+{
+ u8 irq_config;
+ void __iomem *p;
+
+ if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0) {
+ moan_device("no memory in bar 0", dev);
+ return 0;
+ }
+
+ irq_config = 0x41;
+ if (dev->vendor == PCI_VENDOR_ID_PANACOM)
+ irq_config = 0x43;
+ if ((dev->vendor == PCI_VENDOR_ID_PLX) &&
+ (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) {
+ /*
+ * As the megawolf cards have the int pins active
+ * high, and have 2 UART chips, both ints must be
+ * enabled on the 9050. Also, the UARTS are set in
+ * 16450 mode by default, so we have to enable the
+ * 16C950 'enhanced' mode so that we can use the
+ * deep FIFOs
+ */
+ irq_config = 0x5b;
+ }
+
+ /*
+ * enable/disable interrupts
+ */
+ p = ioremap(pci_resource_start(dev, 0), 0x80);
+ if (p == NULL)
+ return -ENOMEM;
+ writel(irq_config, p + 0x4c);
+
+ /*
+ * Read the register back to ensure that it took effect.
+ */
+ readl(p + 0x4c);
+ iounmap(p);
+
+ return 0;
+}
+
+static void __devexit pci_plx9050_exit(struct pci_dev *dev)
+{
+ u8 __iomem *p;
+
+ if ((pci_resource_flags(dev, 0) & IORESOURCE_MEM) == 0)
+ return;
+
+ /*
+ * disable interrupts
+ */
+ p = ioremap(pci_resource_start(dev, 0), 0x80);
+ if (p != NULL) {
+ writel(0, p + 0x4c);
+
+ /*
+ * Read the register back to ensure that it took effect.
+ */
+ readl(p + 0x4c);
+ iounmap(p);
+ }
+}
+
+/* SBS Technologies Inc. PMC-OCTPRO and P-OCTAL cards */
+static int
+sbs_setup(struct pci_dev *dev, struct pci_board *board,
+ struct uart_port *port, int idx)
+{
+ unsigned int bar, offset = board->first_offset;
+
+ bar = 0;
+
+ if (idx < 4) {
+ /* first four channels map to 0, 0x100, 0x200, 0x300 */
+ offset += idx * board->uart_offset;
+ } else if (idx < 8) {
+ /* last four channels map to 0x1000, 0x1100, 0x1200, 0x1300 */
+ offset += idx * board->uart_offset + 0xC00;
+ } else /* we have only 8 ports on PMC-OCTALPRO */
+ return 1;
+
+ return setup_port(dev, port, bar, offset, board->reg_shift);
+}
+
+/*
+* This does initialization for PMC OCTALPRO cards:
+* maps the device memory, resets the UARTs (needed, bc
+* if the module is removed and inserted again, the card
+* is in the sleep mode) and enables global interrupt.
+*/
+
+/* global control register offset for SBS PMC-OctalPro */
+#define OCT_REG_CR_OFF 0x500
+
+static int __devinit sbs_init(struct pci_dev *dev)
+{
+ u8 __iomem *p;
+
+ p = ioremap(pci_resource_start(dev, 0),pci_resource_len(dev,0));
+
+ if (p == NULL)
+ return -ENOMEM;
+ /* Set bit-4 Control Register (UART RESET) in to reset the uarts */
+ writeb(0x10,p + OCT_REG_CR_OFF);
+ udelay(50);
+ writeb(0x0,p + OCT_REG_CR_OFF);
+
+ /* Set bit-2 (INTENABLE) of Control Register */
+ writeb(0x4, p + OCT_REG_CR_OFF);
+ iounmap(p);
+
+ return 0;
+}
+
+/*
+ * Disables the global interrupt of PMC-OctalPro
+ */
+
+static void __devexit sbs_exit(struct pci_dev *dev)
+{
+ u8 __iomem *p;
+
+ p = ioremap(pci_resource_start(dev, 0),pci_resource_len(dev,0));
+ if (p != NULL) {
+ writeb(0, p + OCT_REG_CR_OFF);
+ }
+ iounmap(p);
+}
+
+/*
+ * SIIG serial cards have an PCI interface chip which also controls
+ * the UART clocking frequency. Each UART can be clocked independently
+ * (except cards equiped with 4 UARTs) and initial clocking settings
+ * are stored in the EEPROM chip. It can cause problems because this
+ * version of serial driver doesn't support differently clocked UART's
+ * on single PCI card. To prevent this, initialization functions set
+ * high frequency clocking for all UART's on given card. It is safe (I
+ * hope) because it doesn't touch EEPROM settings to prevent conflicts
+ * with other OSes (like M$ DOS).
+ *
+ * SIIG support added by Andrey Panin <pazke@donpac.ru>, 10/1999
+ *
+ * There is two family of SIIG serial cards with different PCI
+ * interface chip and different configuration methods:
+ * - 10x cards have control registers in IO and/or memory space;
+ * - 20x cards have control registers in standard PCI configuration space.
+ *
+ * Note: some SIIG cards are probed by the parport_serial object.
+ */
+
+#define PCI_DEVICE_ID_SIIG_1S_10x (PCI_DEVICE_ID_SIIG_1S_10x_550 & 0xfffc)
+#define PCI_DEVICE_ID_SIIG_2S_10x (PCI_DEVICE_ID_SIIG_2S_10x_550 & 0xfff8)
+
+static int pci_siig10x_init(struct pci_dev *dev)
+{
+ u16 data;
+ void __iomem *p;
+
+ switch (dev->device & 0xfff8) {
+ case PCI_DEVICE_ID_SIIG_1S_10x: /* 1S */
+ data = 0xffdf;
+ break;
+ case PCI_DEVICE_ID_SIIG_2S_10x: /* 2S, 2S1P */
+ data = 0xf7ff;
+ break;
+ default: /* 1S1P, 4S */
+ data = 0xfffb;
+ break;
+ }
+
+ p = ioremap(pci_resource_start(dev, 0), 0x80);
+ if (p == NULL)
+ return -ENOMEM;
+
+ writew(readw(p + 0x28) & data, p + 0x28);
+ readw(p + 0x28);
+ iounmap(p);
+ return 0;
+}
+
+#define PCI_DEVICE_ID_SIIG_2S_20x (PCI_DEVICE_ID_SIIG_2S_20x_550 & 0xfffc)
+#define PCI_DEVICE_ID_SIIG_2S1P_20x (PCI_DEVICE_ID_SIIG_2S1P_20x_550 & 0xfffc)
+
+static int pci_siig20x_init(struct pci_dev *dev)
+{
+ u8 data;
+
+ /* Change clock frequency for the first UART. */
+ pci_read_config_byte(dev, 0x6f, &data);
+ pci_write_config_byte(dev, 0x6f, data & 0xef);
+
+ /* If this card has 2 UART, we have to do the same with second UART. */
+ if (((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S_20x) ||
+ ((dev->device & 0xfffc) == PCI_DEVICE_ID_SIIG_2S1P_20x)) {
+ pci_read_config_byte(dev, 0x73, &data);
+ pci_write_config_byte(dev, 0x73, data & 0xef);
+ }
+ return 0;
+}
+
+int pci_siig10x_fn(struct pci_dev *dev, int enable)
+{
+ int ret = 0;
+ if (enable)
+ ret = pci_siig10x_init(dev);
+ return ret;
+}
+
+int pci_siig20x_fn(struct pci_dev *dev, int enable)
+{
+ int ret = 0;
+ if (enable)
+ ret = pci_siig20x_init(dev);
+ return ret;
+}
+
+EXPORT_SYMBOL(pci_siig10x_fn);
+EXPORT_SYMBOL(pci_siig20x_fn);
+
+/*
+ * Timedia has an explosion of boards, and to avoid the PCI table from
+ * growing *huge*, we use this function to collapse some 70 entries
+ * in the PCI table into one, for sanity's and compactness's sake.
+ */
+static unsigned short timedia_single_port[] = {
+ 0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0
+};
+
+static unsigned short timedia_dual_port[] = {
+ 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085,
+ 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079,
+ 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079,
+ 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079,
+ 0xD079, 0
+};
+
+static unsigned short timedia_quad_port[] = {
+ 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157,
+ 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159,
+ 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056,
+ 0xB157, 0
+};
+
+static unsigned short timedia_eight_port[] = {
+ 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166,
+ 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0
+};
+
+static struct timedia_struct {
+ int num;
+ unsigned short *ids;
+} timedia_data[] = {
+ { 1, timedia_single_port },
+ { 2, timedia_dual_port },
+ { 4, timedia_quad_port },
+ { 8, timedia_eight_port },
+ { 0, NULL }
+};
+
+static int __devinit pci_timedia_init(struct pci_dev *dev)
+{
+ unsigned short *ids;
+ int i, j;
+
+ for (i = 0; timedia_data[i].num; i++) {
+ ids = timedia_data[i].ids;
+ for (j = 0; ids[j]; j++)
+ if (dev->subsystem_device == ids[j])
+ return timedia_data[i].num;
+ }
+ return 0;
+}
+
+/*
+ * Timedia/SUNIX uses a mixture of BARs and offsets
+ * Ugh, this is ugly as all hell --- TYT
+ */
+static int
+pci_timedia_setup(struct pci_dev *dev, struct pci_board *board,
+ struct uart_port *port, int idx)
+{
+ unsigned int bar = 0, offset = board->first_offset;
+
+ switch (idx) {
+ case 0:
+ bar = 0;
+ break;
+ case 1:
+ offset = board->uart_offset;
+ bar = 0;
+ break;
+ case 2:
+ bar = 1;
+ break;
+ case 3:
+ offset = board->uart_offset;
+ bar = 1;
+ case 4: /* BAR 2 */
+ case 5: /* BAR 3 */
+ case 6: /* BAR 4 */
+ case 7: /* BAR 5 */
+ bar = idx - 2;
+ }
+
+ return setup_port(dev, port, bar, offset, board->reg_shift);
+}
+
+/*
+ * Some Titan cards are also a little weird
+ */
+static int
+titan_400l_800l_setup(struct pci_dev *dev, struct pci_board *board,
+ struct uart_port *port, int idx)
+{
+ unsigned int bar, offset = board->first_offset;
+
+ switch (idx) {
+ case 0:
+ bar = 1;
+ break;
+ case 1:
+ bar = 2;
+ break;
+ default:
+ bar = 4;
+ offset = (idx - 2) * board->uart_offset;
+ }
+
+ return setup_port(dev, port, bar, offset, board->reg_shift);
+}
+
+static int __devinit pci_xircom_init(struct pci_dev *dev)
+{
+ msleep(100);
+ return 0;
+}
+
+static int __devinit pci_netmos_init(struct pci_dev *dev)
+{
+ /* subdevice 0x00PS means <P> parallel, <S> serial */
+ unsigned int num_serial = dev->subsystem_device & 0xf;
+
+ if (num_serial == 0)
+ return -ENODEV;
+ return num_serial;
+}
+
+static int
+pci_default_setup(struct pci_dev *dev, struct pci_board *board,
+ struct uart_port *port, int idx)
+{
+ unsigned int bar, offset = board->first_offset, maxnr;
+
+ bar = FL_GET_BASE(board->flags);
+ if (board->flags & FL_BASE_BARS)
+ bar += idx;
+ else
+ offset += idx * board->uart_offset;
+
+ maxnr = (pci_resource_len(dev, bar) - board->first_offset) /
+ (8 << board->reg_shift);
+
+ if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
+ return 1;
+
+ return setup_port(dev, port, bar, offset, board->reg_shift);
+}
+
+/* This should be in linux/pci_ids.h */
+#define PCI_VENDOR_ID_SBSMODULARIO 0x124B
+#define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B
+#define PCI_DEVICE_ID_OCTPRO 0x0001
+#define PCI_SUBDEVICE_ID_OCTPRO232 0x0108
+#define PCI_SUBDEVICE_ID_OCTPRO422 0x0208
+#define PCI_SUBDEVICE_ID_POCTAL232 0x0308
+#define PCI_SUBDEVICE_ID_POCTAL422 0x0408
+
+/*
+ * Master list of serial port init/setup/exit quirks.
+ * This does not describe the general nature of the port.
+ * (ie, baud base, number and location of ports, etc)
+ *
+ * This list is ordered alphabetically by vendor then device.
+ * Specific entries must come before more generic entries.
+ */
+static struct pci_serial_quirk pci_serial_quirks[] = {
+ /*
+ * AFAVLAB cards.
+ * It is not clear whether this applies to all products.
+ */
+ {
+ .vendor = PCI_VENDOR_ID_AFAVLAB,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = afavlab_setup,
+ },
+ /*
+ * HP Diva
+ */
+ {
+ .vendor = PCI_VENDOR_ID_HP,
+ .device = PCI_DEVICE_ID_HP_DIVA,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_hp_diva_init,
+ .setup = pci_hp_diva_setup,
+ },
+ /*
+ * Intel
+ */
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_80960_RP,
+ .subvendor = 0xe4bf,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_inteli960ni_init,
+ .setup = pci_default_setup,
+ },
+ /*
+ * Panacom
+ */
+ {
+ .vendor = PCI_VENDOR_ID_PANACOM,
+ .device = PCI_DEVICE_ID_PANACOM_QUADMODEM,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_plx9050_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_plx9050_exit),
+ },
+ {
+ .vendor = PCI_VENDOR_ID_PANACOM,
+ .device = PCI_DEVICE_ID_PANACOM_DUALMODEM,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_plx9050_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_plx9050_exit),
+ },
+ /*
+ * PLX
+ */
+ {
+ .vendor = PCI_VENDOR_ID_PLX,
+ .device = PCI_DEVICE_ID_PLX_9050,
+ .subvendor = PCI_SUBVENDOR_ID_KEYSPAN,
+ .subdevice = PCI_SUBDEVICE_ID_KEYSPAN_SX2,
+ .init = pci_plx9050_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_plx9050_exit),
+ },
+ {
+ .vendor = PCI_VENDOR_ID_PLX,
+ .device = PCI_DEVICE_ID_PLX_ROMULUS,
+ .subvendor = PCI_VENDOR_ID_PLX,
+ .subdevice = PCI_DEVICE_ID_PLX_ROMULUS,
+ .init = pci_plx9050_init,
+ .setup = pci_default_setup,
+ .exit = __devexit_p(pci_plx9050_exit),
+ },
+ /*
+ * SBS Technologies, Inc., PMC-OCTALPRO 232
+ */
+ {
+ .vendor = PCI_VENDOR_ID_SBSMODULARIO,
+ .device = PCI_DEVICE_ID_OCTPRO,
+ .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
+ .subdevice = PCI_SUBDEVICE_ID_OCTPRO232,
+ .init = sbs_init,
+ .setup = sbs_setup,
+ .exit = __devexit_p(sbs_exit),
+ },
+ /*
+ * SBS Technologies, Inc., PMC-OCTALPRO 422
+ */
+ {
+ .vendor = PCI_VENDOR_ID_SBSMODULARIO,
+ .device = PCI_DEVICE_ID_OCTPRO,
+ .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
+ .subdevice = PCI_SUBDEVICE_ID_OCTPRO422,
+ .init = sbs_init,
+ .setup = sbs_setup,
+ .exit = __devexit_p(sbs_exit),
+ },
+ /*
+ * SBS Technologies, Inc., P-Octal 232
+ */
+ {
+ .vendor = PCI_VENDOR_ID_SBSMODULARIO,
+ .device = PCI_DEVICE_ID_OCTPRO,
+ .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
+ .subdevice = PCI_SUBDEVICE_ID_POCTAL232,
+ .init = sbs_init,
+ .setup = sbs_setup,
+ .exit = __devexit_p(sbs_exit),
+ },
+ /*
+ * SBS Technologies, Inc., P-Octal 422
+ */
+ {
+ .vendor = PCI_VENDOR_ID_SBSMODULARIO,
+ .device = PCI_DEVICE_ID_OCTPRO,
+ .subvendor = PCI_SUBVENDOR_ID_SBSMODULARIO,
+ .subdevice = PCI_SUBDEVICE_ID_POCTAL422,
+ .init = sbs_init,
+ .setup = sbs_setup,
+ .exit = __devexit_p(sbs_exit),
+ },
+
+ /*
+ * SIIG cards.
+ * It is not clear whether these could be collapsed.
+ */
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_1S_10x_550,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig10x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_1S_10x_650,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig10x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_1S_10x_850,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig10x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_2S_10x_550,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig10x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_2S_10x_650,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig10x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_2S_10x_850,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig10x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_4S_10x_550,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig10x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_4S_10x_650,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig10x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_4S_10x_850,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig10x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_1S_20x_550,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig20x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_1S_20x_650,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig20x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_1S_20x_850,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig20x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_2S_20x_550,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig20x_init,
+ .setup = pci_default_setup,
+ },
+ { .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_2S_20x_650,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig20x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_2S_20x_850,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig20x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_4S_20x_550,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig20x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_4S_20x_650,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig20x_init,
+ .setup = pci_default_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_SIIG,
+ .device = PCI_DEVICE_ID_SIIG_4S_20x_850,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_siig20x_init,
+ .setup = pci_default_setup,
+ },
+ /*
+ * Titan cards
+ */
+ {
+ .vendor = PCI_VENDOR_ID_TITAN,
+ .device = PCI_DEVICE_ID_TITAN_400L,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = titan_400l_800l_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_TITAN,
+ .device = PCI_DEVICE_ID_TITAN_800L,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = titan_400l_800l_setup,
+ },
+ /*
+ * Timedia cards
+ */
+ {
+ .vendor = PCI_VENDOR_ID_TIMEDIA,
+ .device = PCI_DEVICE_ID_TIMEDIA_1889,
+ .subvendor = PCI_VENDOR_ID_TIMEDIA,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_timedia_init,
+ .setup = pci_timedia_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_TIMEDIA,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_timedia_setup,
+ },
+ /*
+ * Xircom cards
+ */
+ {
+ .vendor = PCI_VENDOR_ID_XIRCOM,
+ .device = PCI_DEVICE_ID_XIRCOM_X3201_MDM,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_xircom_init,
+ .setup = pci_default_setup,
+ },
+ /*
+ * Netmos cards
+ */
+ {
+ .vendor = PCI_VENDOR_ID_NETMOS,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_netmos_init,
+ .setup = pci_default_setup,
+ },
+ /*
+ * Default "match everything" terminator entry
+ */
+ {
+ .vendor = PCI_ANY_ID,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_default_setup,
+ }
+};
+
+static inline int quirk_id_matches(u32 quirk_id, u32 dev_id)
+{
+ return quirk_id == PCI_ANY_ID || quirk_id == dev_id;
+}
+
+static struct pci_serial_quirk *find_quirk(struct pci_dev *dev)
+{
+ struct pci_serial_quirk *quirk;
+
+ for (quirk = pci_serial_quirks; ; quirk++)
+ if (quirk_id_matches(quirk->vendor, dev->vendor) &&
+ quirk_id_matches(quirk->device, dev->device) &&
+ quirk_id_matches(quirk->subvendor, dev->subsystem_vendor) &&
+ quirk_id_matches(quirk->subdevice, dev->subsystem_device))
+ break;
+ return quirk;
+}
+
+static _INLINE_ int
+get_pci_irq(struct pci_dev *dev, struct pci_board *board, int idx)
+{
+ if (board->flags & FL_NOIRQ)
+ return 0;
+ else
+ return dev->irq;
+}
+
+/*
+ * This is the configuration table for all of the PCI serial boards
+ * which we support. It is directly indexed by the pci_board_num_t enum
+ * value, which is encoded in the pci_device_id PCI probe table's
+ * driver_data member.
+ *
+ * The makeup of these names are:
+ * pbn_bn{_bt}_n_baud
+ *
+ * bn = PCI BAR number
+ * bt = Index using PCI BARs
+ * n = number of serial ports
+ * baud = baud rate
+ *
+ * Please note: in theory if n = 1, _bt infix should make no difference.
+ * ie, pbn_b0_1_115200 is the same as pbn_b0_bt_1_115200
+ */
+enum pci_board_num_t {
+ pbn_default = 0,
+
+ pbn_b0_1_115200,
+ pbn_b0_2_115200,
+ pbn_b0_4_115200,
+ pbn_b0_5_115200,
+
+ pbn_b0_1_921600,
+ pbn_b0_2_921600,
+ pbn_b0_4_921600,
+
+ pbn_b0_bt_1_115200,
+ pbn_b0_bt_2_115200,
+ pbn_b0_bt_8_115200,
+
+ pbn_b0_bt_1_460800,
+ pbn_b0_bt_2_460800,
+ pbn_b0_bt_4_460800,
+
+ pbn_b0_bt_1_921600,
+ pbn_b0_bt_2_921600,
+ pbn_b0_bt_4_921600,
+ pbn_b0_bt_8_921600,
+
+ pbn_b1_1_115200,
+ pbn_b1_2_115200,
+ pbn_b1_4_115200,
+ pbn_b1_8_115200,
+
+ pbn_b1_1_921600,
+ pbn_b1_2_921600,
+ pbn_b1_4_921600,
+ pbn_b1_8_921600,
+
+ pbn_b1_bt_2_921600,
+
+ pbn_b1_1_1382400,
+ pbn_b1_2_1382400,
+ pbn_b1_4_1382400,
+ pbn_b1_8_1382400,
+
+ pbn_b2_1_115200,
+ pbn_b2_8_115200,
+
+ pbn_b2_1_460800,
+ pbn_b2_4_460800,
+ pbn_b2_8_460800,
+ pbn_b2_16_460800,
+
+ pbn_b2_1_921600,
+ pbn_b2_4_921600,
+ pbn_b2_8_921600,
+
+ pbn_b2_bt_1_115200,
+ pbn_b2_bt_2_115200,
+ pbn_b2_bt_4_115200,
+
+ pbn_b2_bt_2_921600,
+ pbn_b2_bt_4_921600,
+
+ pbn_b3_4_115200,
+ pbn_b3_8_115200,
+
+ /*
+ * Board-specific versions.
+ */
+ pbn_panacom,
+ pbn_panacom2,
+ pbn_panacom4,
+ pbn_plx_romulus,
+ pbn_oxsemi,
+ pbn_intel_i960,
+ pbn_sgi_ioc3,
+ pbn_nec_nile4,
+ pbn_computone_4,
+ pbn_computone_6,
+ pbn_computone_8,
+ pbn_sbsxrsio,
+ pbn_exar_XR17C152,
+ pbn_exar_XR17C154,
+ pbn_exar_XR17C158,
+};
+
+/*
+ * uart_offset - the space between channels
+ * reg_shift - describes how the UART registers are mapped
+ * to PCI memory by the card.
+ * For example IER register on SBS, Inc. PMC-OctPro is located at
+ * offset 0x10 from the UART base, while UART_IER is defined as 1
+ * in include/linux/serial_reg.h,
+ * see first lines of serial_in() and serial_out() in 8250.c
+*/
+
+static struct pci_board pci_boards[] __devinitdata = {
+ [pbn_default] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b0_1_115200] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b0_2_115200] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b0_4_115200] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b0_5_115200] = {
+ .flags = FL_BASE0,
+ .num_ports = 5,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+
+ [pbn_b0_1_921600] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b0_2_921600] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b0_4_921600] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+
+ [pbn_b0_bt_1_115200] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b0_bt_2_115200] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 2,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b0_bt_8_115200] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 8,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+
+ [pbn_b0_bt_1_460800] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 460800,
+ .uart_offset = 8,
+ },
+ [pbn_b0_bt_2_460800] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 2,
+ .base_baud = 460800,
+ .uart_offset = 8,
+ },
+ [pbn_b0_bt_4_460800] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 4,
+ .base_baud = 460800,
+ .uart_offset = 8,
+ },
+
+ [pbn_b0_bt_1_921600] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b0_bt_2_921600] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b0_bt_4_921600] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b0_bt_8_921600] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 8,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+
+ [pbn_b1_1_115200] = {
+ .flags = FL_BASE1,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b1_2_115200] = {
+ .flags = FL_BASE1,
+ .num_ports = 2,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b1_4_115200] = {
+ .flags = FL_BASE1,
+ .num_ports = 4,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b1_8_115200] = {
+ .flags = FL_BASE1,
+ .num_ports = 8,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+
+ [pbn_b1_1_921600] = {
+ .flags = FL_BASE1,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b1_2_921600] = {
+ .flags = FL_BASE1,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b1_4_921600] = {
+ .flags = FL_BASE1,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b1_8_921600] = {
+ .flags = FL_BASE1,
+ .num_ports = 8,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+
+ [pbn_b1_bt_2_921600] = {
+ .flags = FL_BASE1|FL_BASE_BARS,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+
+ [pbn_b1_1_1382400] = {
+ .flags = FL_BASE1,
+ .num_ports = 1,
+ .base_baud = 1382400,
+ .uart_offset = 8,
+ },
+ [pbn_b1_2_1382400] = {
+ .flags = FL_BASE1,
+ .num_ports = 2,
+ .base_baud = 1382400,
+ .uart_offset = 8,
+ },
+ [pbn_b1_4_1382400] = {
+ .flags = FL_BASE1,
+ .num_ports = 4,
+ .base_baud = 1382400,
+ .uart_offset = 8,
+ },
+ [pbn_b1_8_1382400] = {
+ .flags = FL_BASE1,
+ .num_ports = 8,
+ .base_baud = 1382400,
+ .uart_offset = 8,
+ },
+
+ [pbn_b2_1_115200] = {
+ .flags = FL_BASE2,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b2_8_115200] = {
+ .flags = FL_BASE2,
+ .num_ports = 8,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+
+ [pbn_b2_1_460800] = {
+ .flags = FL_BASE2,
+ .num_ports = 1,
+ .base_baud = 460800,
+ .uart_offset = 8,
+ },
+ [pbn_b2_4_460800] = {
+ .flags = FL_BASE2,
+ .num_ports = 4,
+ .base_baud = 460800,
+ .uart_offset = 8,
+ },
+ [pbn_b2_8_460800] = {
+ .flags = FL_BASE2,
+ .num_ports = 8,
+ .base_baud = 460800,
+ .uart_offset = 8,
+ },
+ [pbn_b2_16_460800] = {
+ .flags = FL_BASE2,
+ .num_ports = 16,
+ .base_baud = 460800,
+ .uart_offset = 8,
+ },
+
+ [pbn_b2_1_921600] = {
+ .flags = FL_BASE2,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b2_4_921600] = {
+ .flags = FL_BASE2,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b2_8_921600] = {
+ .flags = FL_BASE2,
+ .num_ports = 8,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+
+ [pbn_b2_bt_1_115200] = {
+ .flags = FL_BASE2|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b2_bt_2_115200] = {
+ .flags = FL_BASE2|FL_BASE_BARS,
+ .num_ports = 2,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b2_bt_4_115200] = {
+ .flags = FL_BASE2|FL_BASE_BARS,
+ .num_ports = 4,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+
+ [pbn_b2_bt_2_921600] = {
+ .flags = FL_BASE2|FL_BASE_BARS,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+ [pbn_b2_bt_4_921600] = {
+ .flags = FL_BASE2|FL_BASE_BARS,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
+
+ [pbn_b3_4_115200] = {
+ .flags = FL_BASE3,
+ .num_ports = 4,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [pbn_b3_8_115200] = {
+ .flags = FL_BASE3,
+ .num_ports = 8,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+
+ /*
+ * Entries following this are board-specific.
+ */
+
+ /*
+ * Panacom - IOMEM
+ */
+ [pbn_panacom] = {
+ .flags = FL_BASE2,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 0x400,
+ .reg_shift = 7,
+ },
+ [pbn_panacom2] = {
+ .flags = FL_BASE2|FL_BASE_BARS,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 0x400,
+ .reg_shift = 7,
+ },
+ [pbn_panacom4] = {
+ .flags = FL_BASE2|FL_BASE_BARS,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 0x400,
+ .reg_shift = 7,
+ },
+
+ /* I think this entry is broken - the first_offset looks wrong --rmk */
+ [pbn_plx_romulus] = {
+ .flags = FL_BASE2,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 8 << 2,
+ .reg_shift = 2,
+ .first_offset = 0x03,
+ },
+
+ /*
+ * This board uses the size of PCI Base region 0 to
+ * signal now many ports are available
+ */
+ [pbn_oxsemi] = {
+ .flags = FL_BASE0|FL_REGION_SZ_CAP,
+ .num_ports = 32,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+
+ /*
+ * EKF addition for i960 Boards form EKF with serial port.
+ * Max 256 ports.
+ */
+ [pbn_intel_i960] = {
+ .flags = FL_BASE0,
+ .num_ports = 32,
+ .base_baud = 921600,
+ .uart_offset = 8 << 2,
+ .reg_shift = 2,
+ .first_offset = 0x10000,
+ },
+ [pbn_sgi_ioc3] = {
+ .flags = FL_BASE0|FL_NOIRQ,
+ .num_ports = 1,
+ .base_baud = 458333,
+ .uart_offset = 8,
+ .reg_shift = 0,
+ .first_offset = 0x20178,
+ },
+
+ /*
+ * NEC Vrc-5074 (Nile 4) builtin UART.
+ */
+ [pbn_nec_nile4] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 520833,
+ .uart_offset = 8 << 3,
+ .reg_shift = 3,
+ .first_offset = 0x300,
+ },
+
+ /*
+ * Computone - uses IOMEM.
+ */
+ [pbn_computone_4] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 0x40,
+ .reg_shift = 2,
+ .first_offset = 0x200,
+ },
+ [pbn_computone_6] = {
+ .flags = FL_BASE0,
+ .num_ports = 6,
+ .base_baud = 921600,
+ .uart_offset = 0x40,
+ .reg_shift = 2,
+ .first_offset = 0x200,
+ },
+ [pbn_computone_8] = {
+ .flags = FL_BASE0,
+ .num_ports = 8,
+ .base_baud = 921600,
+ .uart_offset = 0x40,
+ .reg_shift = 2,
+ .first_offset = 0x200,
+ },
+ [pbn_sbsxrsio] = {
+ .flags = FL_BASE0,
+ .num_ports = 8,
+ .base_baud = 460800,
+ .uart_offset = 256,
+ .reg_shift = 4,
+ },
+ /*
+ * Exar Corp. XR17C15[248] Dual/Quad/Octal UART
+ * Only basic 16550A support.
+ * XR17C15[24] are not tested, but they should work.
+ */
+ [pbn_exar_XR17C152] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 921600,
+ .uart_offset = 0x200,
+ },
+ [pbn_exar_XR17C154] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 0x200,
+ },
+ [pbn_exar_XR17C158] = {
+ .flags = FL_BASE0,
+ .num_ports = 8,
+ .base_baud = 921600,
+ .uart_offset = 0x200,
+ },
+};
+
+/*
+ * Given a complete unknown PCI device, try to use some heuristics to
+ * guess what the configuration might be, based on the pitiful PCI
+ * serial specs. Returns 0 on success, 1 on failure.
+ */
+static int __devinit
+serial_pci_guess_board(struct pci_dev *dev, struct pci_board *board)
+{
+ int num_iomem, num_port, first_port = -1, i;
+
+ /*
+ * If it is not a communications device or the programming
+ * interface is greater than 6, give up.
+ *
+ * (Should we try to make guesses for multiport serial devices
+ * later?)
+ */
+ if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) &&
+ ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) ||
+ (dev->class & 0xff) > 6)
+ return -ENODEV;
+
+ num_iomem = num_port = 0;
+ for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
+ if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
+ num_port++;
+ if (first_port == -1)
+ first_port = i;
+ }
+ if (pci_resource_flags(dev, i) & IORESOURCE_MEM)
+ num_iomem++;
+ }
+
+ /*
+ * If there is 1 or 0 iomem regions, and exactly one port,
+ * use it. We guess the number of ports based on the IO
+ * region size.
+ */
+ if (num_iomem <= 1 && num_port == 1) {
+ board->flags = first_port;
+ board->num_ports = pci_resource_len(dev, first_port) / 8;
+ return 0;
+ }
+
+ /*
+ * Now guess if we've got a board which indexes by BARs.
+ * Each IO BAR should be 8 bytes, and they should follow
+ * consecutively.
+ */
+ first_port = -1;
+ num_port = 0;
+ for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
+ if (pci_resource_flags(dev, i) & IORESOURCE_IO &&
+ pci_resource_len(dev, i) == 8 &&
+ (first_port == -1 || (first_port + num_port) == i)) {
+ num_port++;
+ if (first_port == -1)
+ first_port = i;
+ }
+ }
+
+ if (num_port > 1) {
+ board->flags = first_port | FL_BASE_BARS;
+ board->num_ports = num_port;
+ return 0;
+ }
+
+ return -ENODEV;
+}
+
+static inline int
+serial_pci_matches(struct pci_board *board, struct pci_board *guessed)
+{
+ return
+ board->num_ports == guessed->num_ports &&
+ board->base_baud == guessed->base_baud &&
+ board->uart_offset == guessed->uart_offset &&
+ board->reg_shift == guessed->reg_shift &&
+ board->first_offset == guessed->first_offset;
+}
+
+/*
+ * Probe one serial board. Unfortunately, there is no rhyme nor reason
+ * to the arrangement of serial ports on a PCI card.
+ */
+static int __devinit
+pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
+{
+ struct serial_private *priv;
+ struct pci_board *board, tmp;
+ struct pci_serial_quirk *quirk;
+ int rc, nr_ports, i;
+
+ if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
+ printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n",
+ ent->driver_data);
+ return -EINVAL;
+ }
+
+ board = &pci_boards[ent->driver_data];
+
+ rc = pci_enable_device(dev);
+ if (rc)
+ return rc;
+
+ if (ent->driver_data == pbn_default) {
+ /*
+ * Use a copy of the pci_board entry for this;
+ * avoid changing entries in the table.
+ */
+ memcpy(&tmp, board, sizeof(struct pci_board));
+ board = &tmp;
+
+ /*
+ * We matched one of our class entries. Try to
+ * determine the parameters of this board.
+ */
+ rc = serial_pci_guess_board(dev, board);
+ if (rc)
+ goto disable;
+ } else {
+ /*
+ * We matched an explicit entry. If we are able to
+ * detect this boards settings with our heuristic,
+ * then we no longer need this entry.
+ */
+ memcpy(&tmp, &pci_boards[pbn_default], sizeof(struct pci_board));
+ rc = serial_pci_guess_board(dev, &tmp);
+ if (rc == 0 && serial_pci_matches(board, &tmp))
+ moan_device("Redundant entry in serial pci_table.",
+ dev);
+ }
+
+ nr_ports = board->num_ports;
+
+ /*
+ * Find an init and setup quirks.
+ */
+ quirk = find_quirk(dev);
+
+ /*
+ * Run the new-style initialization function.
+ * The initialization function returns:
+ * <0 - error
+ * 0 - use board->num_ports
+ * >0 - number of ports
+ */
+ if (quirk->init) {
+ rc = quirk->init(dev);
+ if (rc < 0)
+ goto disable;
+ if (rc)
+ nr_ports = rc;
+ }
+
+ priv = kmalloc(sizeof(struct serial_private) +
+ sizeof(unsigned int) * nr_ports,
+ GFP_KERNEL);
+ if (!priv) {
+ rc = -ENOMEM;
+ goto deinit;
+ }
+
+ memset(priv, 0, sizeof(struct serial_private) +
+ sizeof(unsigned int) * nr_ports);
+
+ priv->quirk = quirk;
+ pci_set_drvdata(dev, priv);
+
+ for (i = 0; i < nr_ports; i++) {
+ struct uart_port serial_port;
+ memset(&serial_port, 0, sizeof(struct uart_port));
+
+ serial_port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF |
+ UPF_SHARE_IRQ;
+ serial_port.uartclk = board->base_baud * 16;
+ serial_port.irq = get_pci_irq(dev, board, i);
+ serial_port.dev = &dev->dev;
+ if (quirk->setup(dev, board, &serial_port, i))
+ break;
+#ifdef SERIAL_DEBUG_PCI
+ printk("Setup PCI port: port %x, irq %d, type %d\n",
+ serial_port.iobase, serial_port.irq, serial_port.iotype);
+#endif
+
+ priv->line[i] = serial8250_register_port(&serial_port);
+ if (priv->line[i] < 0) {
+ printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]);
+ break;
+ }
+ }
+
+ priv->nr = i;
+
+ return 0;
+
+ deinit:
+ if (quirk->exit)
+ quirk->exit(dev);
+ disable:
+ pci_disable_device(dev);
+ return rc;
+}
+
+static void __devexit pciserial_remove_one(struct pci_dev *dev)
+{
+ struct serial_private *priv = pci_get_drvdata(dev);
+
+ pci_set_drvdata(dev, NULL);
+
+ if (priv) {
+ struct pci_serial_quirk *quirk;
+ int i;
+
+ for (i = 0; i < priv->nr; i++)
+ serial8250_unregister_port(priv->line[i]);
+
+ for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) {
+ if (priv->remapped_bar[i])
+ iounmap(priv->remapped_bar[i]);
+ priv->remapped_bar[i] = NULL;
+ }
+
+ /*
+ * Find the exit quirks.
+ */
+ quirk = find_quirk(dev);
+ if (quirk->exit)
+ quirk->exit(dev);
+
+ pci_disable_device(dev);
+
+ kfree(priv);
+ }
+}
+
+static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state)
+{
+ struct serial_private *priv = pci_get_drvdata(dev);
+
+ if (priv) {
+ int i;
+
+ for (i = 0; i < priv->nr; i++)
+ serial8250_suspend_port(priv->line[i]);
+ }
+ pci_save_state(dev);
+ pci_set_power_state(dev, pci_choose_state(dev, state));
+ return 0;
+}
+
+static int pciserial_resume_one(struct pci_dev *dev)
+{
+ struct serial_private *priv = pci_get_drvdata(dev);
+
+ pci_set_power_state(dev, PCI_D0);
+ pci_restore_state(dev);
+
+ if (priv) {
+ int i;
+
+ /*
+ * The device may have been disabled. Re-enable it.
+ */
+ pci_enable_device(dev);
+
+ /*
+ * Ensure that the board is correctly configured.
+ */
+ if (priv->quirk->init)
+ priv->quirk->init(dev);
+
+ for (i = 0; i < priv->nr; i++)
+ serial8250_resume_port(priv->line[i]);
+ }
+ return 0;
+}
+
+static struct pci_device_id serial_pci_tbl[] = {
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
+ pbn_b1_8_1382400 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
+ pbn_b1_4_1382400 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
+ pbn_b1_2_1382400 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
+ pbn_b1_8_1382400 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232, 0, 0,
+ pbn_b1_4_1382400 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232, 0, 0,
+ pbn_b1_2_1382400 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485, 0, 0,
+ pbn_b1_8_921600 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4, 0, 0,
+ pbn_b1_8_921600 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485, 0, 0,
+ pbn_b1_4_921600 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2, 0, 0,
+ pbn_b1_4_921600 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485, 0, 0,
+ pbn_b1_2_921600 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6, 0, 0,
+ pbn_b1_8_921600 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1, 0, 0,
+ pbn_b1_8_921600 },
+ { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V351,
+ PCI_SUBVENDOR_ID_CONNECT_TECH,
+ PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1, 0, 0,
+ pbn_b1_4_921600 },
+
+ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_1_115200 },
+ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM2,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_2_115200 },
+ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM422,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_4_115200 },
+ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM232,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_2_115200 },
+ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM4,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_4_115200 },
+ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_COMM8,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_8_115200 },
+ { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_UCOMM8,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_8_115200 },
+
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_GTEK_SERIAL2,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_2_115200 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM200,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_2_921600 },
+ /*
+ * VScom SPCOM800, from sl@s.pl
+ */
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_SPCOM800,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_8_921600 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_1077,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_4_921600 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_SUBVENDOR_ID_KEYSPAN,
+ PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0,
+ pbn_panacom },
+ { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_QUADMODEM,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_panacom4 },
+ { PCI_VENDOR_ID_PANACOM, PCI_DEVICE_ID_PANACOM_DUALMODEM,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_panacom2 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_SUBVENDOR_ID_CHASE_PCIFAST,
+ PCI_SUBDEVICE_ID_CHASE_PCIFAST4, 0, 0,
+ pbn_b2_4_460800 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_SUBVENDOR_ID_CHASE_PCIFAST,
+ PCI_SUBDEVICE_ID_CHASE_PCIFAST8, 0, 0,
+ pbn_b2_8_460800 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_SUBVENDOR_ID_CHASE_PCIFAST,
+ PCI_SUBDEVICE_ID_CHASE_PCIFAST16, 0, 0,
+ pbn_b2_16_460800 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_SUBVENDOR_ID_CHASE_PCIFAST,
+ PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC, 0, 0,
+ pbn_b2_16_460800 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_SUBVENDOR_ID_CHASE_PCIRAS,
+ PCI_SUBDEVICE_ID_CHASE_PCIRAS4, 0, 0,
+ pbn_b2_4_460800 },
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_SUBVENDOR_ID_CHASE_PCIRAS,
+ PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0,
+ pbn_b2_8_460800 },
+ /*
+ * Megawolf Romulus PCI Serial Card, from Mike Hudson
+ * (Exoray@isys.ca)
+ */
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_ROMULUS,
+ 0x10b5, 0x106a, 0, 0,
+ pbn_plx_romulus },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_QSC100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_4_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_DSC100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_2_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100D,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_8_115200 },
+ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_ESC100M,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_8_115200 },
+ { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_OXSEMI_16PCI954,
+ PCI_VENDOR_ID_SPECIALIX, PCI_SUBDEVICE_ID_SPECIALIX_SPEED4, 0, 0,
+ pbn_b0_4_921600 },
+ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI954,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_4_115200 },
+ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI952,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_921600 },
+
+ /*
+ * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards,
+ * from skokodyn@yahoo.com
+ */
+ { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
+ PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO232, 0, 0,
+ pbn_sbsxrsio },
+ { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
+ PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_OCTPRO422, 0, 0,
+ pbn_sbsxrsio },
+ { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
+ PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL232, 0, 0,
+ pbn_sbsxrsio },
+ { PCI_VENDOR_ID_SBSMODULARIO, PCI_DEVICE_ID_OCTPRO,
+ PCI_SUBVENDOR_ID_SBSMODULARIO, PCI_SUBDEVICE_ID_POCTAL422, 0, 0,
+ pbn_sbsxrsio },
+
+ /*
+ * Digitan DS560-558, from jimd@esoft.com
+ */
+ { PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_ATT_VENUS_MODEM,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_1_115200 },
+
+ /*
+ * Titan Electronic cards
+ * The 400L and 800L have a custom setup quirk.
+ */
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_1_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_2_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_4_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800B,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_4_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100L,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_1_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200L,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_bt_2_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400L,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_4_921600 },
+ { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800L,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_8_921600 },
+
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_1_460800 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_650,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_1_460800 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_850,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_1_460800 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_550,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_2_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_650,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_2_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_10x_850,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_2_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_550,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_4_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_650,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_4_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_10x_850,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_4_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_550,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_1_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_650,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_1_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_20x_850,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_1_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_550,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_650,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S_20x_850,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_550,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_4_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_650,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_4_921600 },
+ { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_4_921600 },
+
+ /*
+ * Computone devices submitted by Doug McNash dmcnash@computone.com
+ */
+ { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
+ PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG4,
+ 0, 0, pbn_computone_4 },
+ { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
+ PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG8,
+ 0, 0, pbn_computone_8 },
+ { PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_PG,
+ PCI_SUBVENDOR_ID_COMPUTONE, PCI_SUBDEVICE_ID_COMPUTONE_PG6,
+ 0, 0, pbn_computone_6 },
+
+ { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_oxsemi },
+ { PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889,
+ PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_1_921600 },
+
+ /*
+ * AFAVLAB serial card, from Harald Welte <laforge@gnumonks.org>
+ */
+ { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P028,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_8_115200 },
+ { PCI_VENDOR_ID_AFAVLAB, PCI_DEVICE_ID_AFAVLAB_P030,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_8_115200 },
+
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_DSERIAL,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_115200 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_A,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_115200 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_115200 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_4_460800 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_B,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_4_460800 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_PLUS,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_460800 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_A,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_460800 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUAD_B,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_460800 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_SSERIAL,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_1_115200 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_PORT_650,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_1_460800 },
+
+ /*
+ * Dell Remote Access Card 4 - Tim_T_Murphy@Dell.com
+ */
+ { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RAC4,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_1_1382400 },
+
+ /*
+ * Dell Remote Access Card III - Tim_T_Murphy@Dell.com
+ */
+ { PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_RACIII,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b1_1_1382400 },
+
+ /*
+ * RAStel 2 port modem, gerg@moreton.com.au
+ */
+ { PCI_VENDOR_ID_MORETON, PCI_DEVICE_ID_RASTEL_2PORT,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_bt_2_115200 },
+
+ /*
+ * EKF addition for i960 Boards form EKF with serial port
+ */
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80960_RP,
+ 0xE4BF, PCI_ANY_ID, 0, 0,
+ pbn_intel_i960 },
+
+ /*
+ * Xircom Cardbus/Ethernet combos
+ */
+ { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_X3201_MDM,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_1_115200 },
+ /*
+ * Xircom RBM56G cardbus modem - Dirk Arnold (temp entry)
+ */
+ { PCI_VENDOR_ID_XIRCOM, PCI_DEVICE_ID_XIRCOM_RBM56G,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_1_115200 },
+
+ /*
+ * Untested PCI modems, sent in from various folks...
+ */
+
+ /*
+ * Elsa Model 56K PCI Modem, from Andreas Rath <arh@01019freenet.de>
+ */
+ { PCI_VENDOR_ID_ROCKWELL, 0x1004,
+ 0x1048, 0x1500, 0, 0,
+ pbn_b1_1_115200 },
+
+ { PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
+ 0xFF00, 0, 0, 0,
+ pbn_sgi_ioc3 },
+
+ /*
+ * HP Diva card
+ */
+ { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA,
+ PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_RMP3, 0, 0,
+ pbn_b1_1_115200 },
+ { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_5_115200 },
+ { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b2_1_115200 },
+
+ /*
+ * NEC Vrc-5074 (Nile 4) builtin UART.
+ */
+ { PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_NILE4,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_nec_nile4 },
+
+ { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM4,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b3_4_115200 },
+ { PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM8,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b3_8_115200 },
+
+ /*
+ * Exar Corp. XR17C15[248] Dual/Quad/Octal UART
+ */
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_exar_XR17C152 },
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C154,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_exar_XR17C154 },
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C158,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_exar_XR17C158 },
+
+ /*
+ * Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
+ */
+ { PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_1_115200 },
+
+ /*
+ * These entries match devices with class COMMUNICATION_SERIAL,
+ * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
+ */
+ { PCI_ANY_ID, PCI_ANY_ID,
+ PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_COMMUNICATION_SERIAL << 8,
+ 0xffff00, pbn_default },
+ { PCI_ANY_ID, PCI_ANY_ID,
+ PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_COMMUNICATION_MODEM << 8,
+ 0xffff00, pbn_default },
+ { PCI_ANY_ID, PCI_ANY_ID,
+ PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_COMMUNICATION_MULTISERIAL << 8,
+ 0xffff00, pbn_default },
+ { 0, }
+};
+
+static struct pci_driver serial_pci_driver = {
+ .name = "serial",
+ .probe = pciserial_init_one,
+ .remove = __devexit_p(pciserial_remove_one),
+ .suspend = pciserial_suspend_one,
+ .resume = pciserial_resume_one,
+ .id_table = serial_pci_tbl,
+};
+
+static int __init serial8250_pci_init(void)
+{
+ return pci_register_driver(&serial_pci_driver);
+}
+
+static void __exit serial8250_pci_exit(void)
+{
+ pci_unregister_driver(&serial_pci_driver);
+}
+
+module_init(serial8250_pci_init);
+module_exit(serial8250_pci_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module");
+MODULE_DEVICE_TABLE(pci, serial_pci_tbl);
diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
new file mode 100644
index 00000000000..18c58fb7389
--- /dev/null
+++ b/drivers/serial/8250_pnp.c
@@ -0,0 +1,457 @@
+/*
+ * linux/drivers/char/8250_pnp.c
+ *
+ * Probe module for 8250/16550-type ISAPNP serial ports.
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ * Copyright (C) 2001 Russell King, All Rights Reserved.
+ *
+ * Ported to the Linux PnP Layer - (C) Adam Belay.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ * $Id: 8250_pnp.c,v 1.10 2002/07/21 21:32:30 rmk Exp $
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pnp.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/serial_core.h>
+#include <linux/bitops.h>
+
+#include <asm/byteorder.h>
+
+#include "8250.h"
+
+#define UNKNOWN_DEV 0x3000
+
+
+static const struct pnp_device_id pnp_dev_table[] = {
+ /* Archtek America Corp. */
+ /* Archtek SmartLink Modem 3334BT Plug & Play */
+ { "AAC000F", 0 },
+ /* Anchor Datacomm BV */
+ /* SXPro 144 External Data Fax Modem Plug & Play */
+ { "ADC0001", 0 },
+ /* SXPro 288 External Data Fax Modem Plug & Play */
+ { "ADC0002", 0 },
+ /* PROLiNK 1456VH ISA PnP K56flex Fax Modem */
+ { "AEI0250", 0 },
+ /* Actiontec ISA PNP 56K X2 Fax Modem */
+ { "AEI1240", 0 },
+ /* Rockwell 56K ACF II Fax+Data+Voice Modem */
+ { "AKY1021", 0 /*SPCI_FL_NO_SHIRQ*/ },
+ /* AZT3005 PnP SOUND DEVICE */
+ { "AZT4001", 0 },
+ /* Best Data Products Inc. Smart One 336F PnP Modem */
+ { "BDP3336", 0 },
+ /* Boca Research */
+ /* Boca Complete Ofc Communicator 14.4 Data-FAX */
+ { "BRI0A49", 0 },
+ /* Boca Research 33,600 ACF Modem */
+ { "BRI1400", 0 },
+ /* Boca 33.6 Kbps Internal FD34FSVD */
+ { "BRI3400", 0 },
+ /* Boca 33.6 Kbps Internal FD34FSVD */
+ { "BRI0A49", 0 },
+ /* Best Data Products Inc. Smart One 336F PnP Modem */
+ { "BDP3336", 0 },
+ /* Computer Peripherals Inc */
+ /* EuroViVa CommCenter-33.6 SP PnP */
+ { "CPI4050", 0 },
+ /* Creative Labs */
+ /* Creative Labs Phone Blaster 28.8 DSVD PnP Voice */
+ { "CTL3001", 0 },
+ /* Creative Labs Modem Blaster 28.8 DSVD PnP Voice */
+ { "CTL3011", 0 },
+ /* Creative */
+ /* Creative Modem Blaster Flash56 DI5601-1 */
+ { "DMB1032", 0 },
+ /* Creative Modem Blaster V.90 DI5660 */
+ { "DMB2001", 0 },
+ /* E-Tech */
+ /* E-Tech CyberBULLET PC56RVP */
+ { "ETT0002", 0 },
+ /* FUJITSU */
+ /* Fujitsu 33600 PnP-I2 R Plug & Play */
+ { "FUJ0202", 0 },
+ /* Fujitsu FMV-FX431 Plug & Play */
+ { "FUJ0205", 0 },
+ /* Fujitsu 33600 PnP-I4 R Plug & Play */
+ { "FUJ0206", 0 },
+ /* Fujitsu Fax Voice 33600 PNP-I5 R Plug & Play */
+ { "FUJ0209", 0 },
+ /* Archtek America Corp. */
+ /* Archtek SmartLink Modem 3334BT Plug & Play */
+ { "GVC000F", 0 },
+ /* Hayes */
+ /* Hayes Optima 288 V.34-V.FC + FAX + Voice Plug & Play */
+ { "HAY0001", 0 },
+ /* Hayes Optima 336 V.34 + FAX + Voice PnP */
+ { "HAY000C", 0 },
+ /* Hayes Optima 336B V.34 + FAX + Voice PnP */
+ { "HAY000D", 0 },
+ /* Hayes Accura 56K Ext Fax Modem PnP */
+ { "HAY5670", 0 },
+ /* Hayes Accura 56K Ext Fax Modem PnP */
+ { "HAY5674", 0 },
+ /* Hayes Accura 56K Fax Modem PnP */
+ { "HAY5675", 0 },
+ /* Hayes 288, V.34 + FAX */
+ { "HAYF000", 0 },
+ /* Hayes Optima 288 V.34 + FAX + Voice, Plug & Play */
+ { "HAYF001", 0 },
+ /* IBM */
+ /* IBM Thinkpad 701 Internal Modem Voice */
+ { "IBM0033", 0 },
+ /* Intertex */
+ /* Intertex 28k8 33k6 Voice EXT PnP */
+ { "IXDC801", 0 },
+ /* Intertex 33k6 56k Voice EXT PnP */
+ { "IXDC901", 0 },
+ /* Intertex 28k8 33k6 Voice SP EXT PnP */
+ { "IXDD801", 0 },
+ /* Intertex 33k6 56k Voice SP EXT PnP */
+ { "IXDD901", 0 },
+ /* Intertex 28k8 33k6 Voice SP INT PnP */
+ { "IXDF401", 0 },
+ /* Intertex 28k8 33k6 Voice SP EXT PnP */
+ { "IXDF801", 0 },
+ /* Intertex 33k6 56k Voice SP EXT PnP */
+ { "IXDF901", 0 },
+ /* Kortex International */
+ /* KORTEX 28800 Externe PnP */
+ { "KOR4522", 0 },
+ /* KXPro 33.6 Vocal ASVD PnP */
+ { "KORF661", 0 },
+ /* Lasat */
+ /* LASAT Internet 33600 PnP */
+ { "LAS4040", 0 },
+ /* Lasat Safire 560 PnP */
+ { "LAS4540", 0 },
+ /* Lasat Safire 336 PnP */
+ { "LAS5440", 0 },
+ /* Microcom, Inc. */
+ /* Microcom TravelPorte FAST V.34 Plug & Play */
+ { "MNP0281", 0 },
+ /* Microcom DeskPorte V.34 FAST or FAST+ Plug & Play */
+ { "MNP0336", 0 },
+ /* Microcom DeskPorte FAST EP 28.8 Plug & Play */
+ { "MNP0339", 0 },
+ /* Microcom DeskPorte 28.8P Plug & Play */
+ { "MNP0342", 0 },
+ /* Microcom DeskPorte FAST ES 28.8 Plug & Play */
+ { "MNP0500", 0 },
+ /* Microcom DeskPorte FAST ES 28.8 Plug & Play */
+ { "MNP0501", 0 },
+ /* Microcom DeskPorte 28.8S Internal Plug & Play */
+ { "MNP0502", 0 },
+ /* Motorola */
+ /* Motorola BitSURFR Plug & Play */
+ { "MOT1105", 0 },
+ /* Motorola TA210 Plug & Play */
+ { "MOT1111", 0 },
+ /* Motorola HMTA 200 (ISDN) Plug & Play */
+ { "MOT1114", 0 },
+ /* Motorola BitSURFR Plug & Play */
+ { "MOT1115", 0 },
+ /* Motorola Lifestyle 28.8 Internal */
+ { "MOT1190", 0 },
+ /* Motorola V.3400 Plug & Play */
+ { "MOT1501", 0 },
+ /* Motorola Lifestyle 28.8 V.34 Plug & Play */
+ { "MOT1502", 0 },
+ /* Motorola Power 28.8 V.34 Plug & Play */
+ { "MOT1505", 0 },
+ /* Motorola ModemSURFR External 28.8 Plug & Play */
+ { "MOT1509", 0 },
+ /* Motorola Premier 33.6 Desktop Plug & Play */
+ { "MOT150A", 0 },
+ /* Motorola VoiceSURFR 56K External PnP */
+ { "MOT150F", 0 },
+ /* Motorola ModemSURFR 56K External PnP */
+ { "MOT1510", 0 },
+ /* Motorola ModemSURFR 56K Internal PnP */
+ { "MOT1550", 0 },
+ /* Motorola ModemSURFR Internal 28.8 Plug & Play */
+ { "MOT1560", 0 },
+ /* Motorola Premier 33.6 Internal Plug & Play */
+ { "MOT1580", 0 },
+ /* Motorola OnlineSURFR 28.8 Internal Plug & Play */
+ { "MOT15B0", 0 },
+ /* Motorola VoiceSURFR 56K Internal PnP */
+ { "MOT15F0", 0 },
+ /* Com 1 */
+ /* Deskline K56 Phone System PnP */
+ { "MVX00A1", 0 },
+ /* PC Rider K56 Phone System PnP */
+ { "MVX00F2", 0 },
+ /* NEC 98NOTE SPEAKER PHONE FAX MODEM(33600bps) */
+ { "nEC8241", 0 },
+ /* Pace 56 Voice Internal Plug & Play Modem */
+ { "PMC2430", 0 },
+ /* Generic */
+ /* Generic standard PC COM port */
+ { "PNP0500", 0 },
+ /* Generic 16550A-compatible COM port */
+ { "PNP0501", 0 },
+ /* Compaq 14400 Modem */
+ { "PNPC000", 0 },
+ /* Compaq 2400/9600 Modem */
+ { "PNPC001", 0 },
+ /* Dial-Up Networking Serial Cable between 2 PCs */
+ { "PNPC031", 0 },
+ /* Dial-Up Networking Parallel Cable between 2 PCs */
+ { "PNPC032", 0 },
+ /* Standard 9600 bps Modem */
+ { "PNPC100", 0 },
+ /* Standard 14400 bps Modem */
+ { "PNPC101", 0 },
+ /* Standard 28800 bps Modem*/
+ { "PNPC102", 0 },
+ /* Standard Modem*/
+ { "PNPC103", 0 },
+ /* Standard 9600 bps Modem*/
+ { "PNPC104", 0 },
+ /* Standard 14400 bps Modem*/
+ { "PNPC105", 0 },
+ /* Standard 28800 bps Modem*/
+ { "PNPC106", 0 },
+ /* Standard Modem */
+ { "PNPC107", 0 },
+ /* Standard 9600 bps Modem */
+ { "PNPC108", 0 },
+ /* Standard 14400 bps Modem */
+ { "PNPC109", 0 },
+ /* Standard 28800 bps Modem */
+ { "PNPC10A", 0 },
+ /* Standard Modem */
+ { "PNPC10B", 0 },
+ /* Standard 9600 bps Modem */
+ { "PNPC10C", 0 },
+ /* Standard 14400 bps Modem */
+ { "PNPC10D", 0 },
+ /* Standard 28800 bps Modem */
+ { "PNPC10E", 0 },
+ /* Standard Modem */
+ { "PNPC10F", 0 },
+ /* Standard PCMCIA Card Modem */
+ { "PNP2000", 0 },
+ /* Rockwell */
+ /* Modular Technology */
+ /* Rockwell 33.6 DPF Internal PnP */
+ /* Modular Technology 33.6 Internal PnP */
+ { "ROK0030", 0 },
+ /* Kortex International */
+ /* KORTEX 14400 Externe PnP */
+ { "ROK0100", 0 },
+ /* Rockwell 28.8 */
+ { "ROK4120", 0 },
+ /* Viking Components, Inc */
+ /* Viking 28.8 INTERNAL Fax+Data+Voice PnP */
+ { "ROK4920", 0 },
+ /* Rockwell */
+ /* British Telecom */
+ /* Modular Technology */
+ /* Rockwell 33.6 DPF External PnP */
+ /* BT Prologue 33.6 External PnP */
+ /* Modular Technology 33.6 External PnP */
+ { "RSS00A0", 0 },
+ /* Viking 56K FAX INT */
+ { "RSS0262", 0 },
+ /* K56 par,VV,Voice,Speakphone,AudioSpan,PnP */
+ { "RSS0250", 0 },
+ /* SupraExpress 28.8 Data/Fax PnP modem */
+ { "SUP1310", 0 },
+ /* SupraExpress 33.6 Data/Fax PnP modem */
+ { "SUP1421", 0 },
+ /* SupraExpress 33.6 Data/Fax PnP modem */
+ { "SUP1590", 0 },
+ /* SupraExpress 33.6 Data/Fax PnP modem */
+ { "SUP1760", 0 },
+ /* Phoebe Micro */
+ /* Phoebe Micro 33.6 Data Fax 1433VQH Plug & Play */
+ { "TEX0011", 0 },
+ /* Archtek America Corp. */
+ /* Archtek SmartLink Modem 3334BT Plug & Play */
+ { "UAC000F", 0 },
+ /* 3Com Corp. */
+ /* Gateway Telepath IIvi 33.6 */
+ { "USR0000", 0 },
+ /* U.S. Robotics Sporster 33.6K Fax INT PnP */
+ { "USR0002", 0 },
+ /* Sportster Vi 14.4 PnP FAX Voicemail */
+ { "USR0004", 0 },
+ /* U.S. Robotics 33.6K Voice INT PnP */
+ { "USR0006", 0 },
+ /* U.S. Robotics 33.6K Voice EXT PnP */
+ { "USR0007", 0 },
+ /* U.S. Robotics Courier V.Everything INT PnP */
+ { "USR0009", 0 },
+ /* U.S. Robotics 33.6K Voice INT PnP */
+ { "USR2002", 0 },
+ /* U.S. Robotics 56K Voice INT PnP */
+ { "USR2070", 0 },
+ /* U.S. Robotics 56K Voice EXT PnP */
+ { "USR2080", 0 },
+ /* U.S. Robotics 56K FAX INT */
+ { "USR3031", 0 },
+ /* U.S. Robotics 56K FAX INT */
+ { "USR3050", 0 },
+ /* U.S. Robotics 56K Voice INT PnP */
+ { "USR3070", 0 },
+ /* U.S. Robotics 56K Voice EXT PnP */
+ { "USR3080", 0 },
+ /* U.S. Robotics 56K Voice INT PnP */
+ { "USR3090", 0 },
+ /* U.S. Robotics 56K Message */
+ { "USR9100", 0 },
+ /* U.S. Robotics 56K FAX EXT PnP*/
+ { "USR9160", 0 },
+ /* U.S. Robotics 56K FAX INT PnP*/
+ { "USR9170", 0 },
+ /* U.S. Robotics 56K Voice EXT PnP*/
+ { "USR9180", 0 },
+ /* U.S. Robotics 56K Voice INT PnP*/
+ { "USR9190", 0 },
+ /* Rockwell's (PORALiNK) 33600 INT PNP */
+ { "WCI0003", 0 },
+ /* Unkown PnP modems */
+ { "PNPCXXX", UNKNOWN_DEV },
+ /* More unkown PnP modems */
+ { "PNPDXXX", UNKNOWN_DEV },
+ { "", 0 }
+};
+
+MODULE_DEVICE_TABLE(pnp, pnp_dev_table);
+
+static char *modem_names[] __devinitdata = {
+ "MODEM", "Modem", "modem", "FAX", "Fax", "fax",
+ "56K", "56k", "K56", "33.6", "28.8", "14.4",
+ "33,600", "28,800", "14,400", "33.600", "28.800", "14.400",
+ "33600", "28800", "14400", "V.90", "V.34", "V.32", NULL
+};
+
+static int __devinit check_name(char *name)
+{
+ char **tmp;
+
+ for (tmp = modem_names; *tmp; tmp++)
+ if (strstr(name, *tmp))
+ return 1;
+
+ return 0;
+}
+
+static int __devinit check_resources(struct pnp_option *option)
+{
+ struct pnp_option *tmp;
+ if (!option)
+ return 0;
+
+ for (tmp = option; tmp; tmp = tmp->next) {
+ struct pnp_port *port;
+ for (port = tmp->port; port; port = port->next)
+ if ((port->size == 8) &&
+ ((port->min == 0x2f8) ||
+ (port->min == 0x3f8) ||
+ (port->min == 0x2e8) ||
+ (port->min == 0x3e8)))
+ return 1;
+ }
+
+ return 0;
+}
+
+/*
+ * Given a complete unknown PnP device, try to use some heuristics to
+ * detect modems. Currently use such heuristic set:
+ * - dev->name or dev->bus->name must contain "modem" substring;
+ * - device must have only one IO region (8 byte long) with base address
+ * 0x2e8, 0x3e8, 0x2f8 or 0x3f8.
+ *
+ * Such detection looks very ugly, but can detect at least some of numerous
+ * PnP modems, alternatively we must hardcode all modems in pnp_devices[]
+ * table.
+ */
+static int __devinit serial_pnp_guess_board(struct pnp_dev *dev, int *flags)
+{
+ if (!(check_name(pnp_dev_name(dev)) || (dev->card && check_name(dev->card->name))))
+ return -ENODEV;
+
+ if (check_resources(dev->independent))
+ return 0;
+
+ if (check_resources(dev->dependent))
+ return 0;
+
+ return -ENODEV;
+}
+
+static int __devinit
+serial_pnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id)
+{
+ struct uart_port port;
+ int ret, line, flags = dev_id->driver_data;
+
+ if (flags & UNKNOWN_DEV) {
+ ret = serial_pnp_guess_board(dev, &flags);
+ if (ret < 0)
+ return ret;
+ }
+
+ memset(&port, 0, sizeof(struct uart_port));
+ port.irq = pnp_irq(dev,0);
+ port.iobase = pnp_port_start(dev, 0);
+
+#ifdef SERIAL_DEBUG_PNP
+ printk("Setup PNP port: port %x, irq %d, type %d\n",
+ port.iobase, port.irq, port.iotype);
+#endif
+
+ port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
+ port.uartclk = 1843200;
+ port.dev = &dev->dev;
+
+ line = serial8250_register_port(&port);
+
+ if (line >= 0)
+ pnp_set_drvdata(dev, (void *)((long)line + 1));
+ return line >= 0 ? 0 : -ENODEV;
+
+}
+
+static void __devexit serial_pnp_remove(struct pnp_dev * dev)
+{
+ long line = (long)pnp_get_drvdata(dev);
+ if (line)
+ serial8250_unregister_port(line - 1);
+}
+
+static struct pnp_driver serial_pnp_driver = {
+ .name = "serial",
+ .id_table = pnp_dev_table,
+ .probe = serial_pnp_probe,
+ .remove = __devexit_p(serial_pnp_remove),
+};
+
+static int __init serial8250_pnp_init(void)
+{
+ return pnp_register_driver(&serial_pnp_driver);
+}
+
+static void __exit serial8250_pnp_exit(void)
+{
+ pnp_unregister_driver(&serial_pnp_driver);
+}
+
+module_init(serial8250_pnp_init);
+module_exit(serial8250_pnp_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Generic 8250/16x50 PnP serial driver");
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
new file mode 100644
index 00000000000..6e44b46c9e9
--- /dev/null
+++ b/drivers/serial/Kconfig
@@ -0,0 +1,846 @@
+#
+# Serial device configuration
+#
+# $Id: Kconfig,v 1.11 2004/03/11 18:08:04 lethal Exp $
+#
+
+menu "Serial drivers"
+
+#
+# The new 8250/16550 serial drivers
+config SERIAL_8250
+ tristate "8250/16550 and compatible serial support"
+ depends on (BROKEN || !(SPARC64 || SPARC32))
+ select SERIAL_CORE
+ ---help---
+ This selects whether you want to include the driver for the standard
+ serial ports. The standard answer is Y. People who might say N
+ here are those that are setting up dedicated Ethernet WWW/FTP
+ servers, or users that have one of the various bus mice instead of a
+ serial mouse and don't intend to use their machine's standard serial
+ port for anything. (Note that the Cyclades and Stallion multi
+ serial port drivers do not need this driver built in for them to
+ work.)
+
+ To compile this driver as a module, choose M here: the
+ module will be called serial.
+ [WARNING: Do not compile this driver as a module if you are using
+ non-standard serial ports, since the configuration information will
+ be lost when the driver is unloaded. This limitation may be lifted
+ in the future.]
+
+ BTW1: If you have a mouseman serial mouse which is not recognized by
+ the X window system, try running gpm first.
+
+ BTW2: If you intend to use a software modem (also called Winmodem)
+ under Linux, forget it. These modems are crippled and require
+ proprietary drivers which are only available under Windows.
+
+ Most people will say Y or M here, so that they can use serial mice,
+ modems and similar devices connecting to the standard serial ports.
+
+config SERIAL_8250_CONSOLE
+ bool "Console on 8250/16550 and compatible serial port"
+ depends on SERIAL_8250=y
+ select SERIAL_CORE_CONSOLE
+ ---help---
+ If you say Y here, it will be possible to use a serial port as the
+ system console (the system console is the device which receives all
+ kernel messages and warnings and which allows logins in single user
+ mode). This could be useful if some terminal or printer is connected
+ to that serial port.
+
+ Even if you say Y here, the currently visible virtual console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttyS1". (Try "man bootparam" or see the documentation of
+ your boot loader (grub or lilo or loadlin) about how to pass options
+ to the kernel at boot time.)
+
+ If you don't have a VGA card installed and you say Y here, the
+ kernel will automatically use the first serial line, /dev/ttyS0, as
+ system console.
+
+ If unsure, say N.
+
+config SERIAL_8250_CS
+ tristate "8250/16550 PCMCIA device support"
+ depends on PCMCIA && SERIAL_8250
+ ---help---
+ Say Y here to enable support for 16-bit PCMCIA serial devices,
+ including serial port cards, modems, and the modem functions of
+ multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are
+ credit-card size devices often used with laptops.)
+
+ To compile this driver as a module, choose M here: the
+ module will be called serial_cs.
+
+ If unsure, say N.
+
+config SERIAL_8250_ACPI
+ bool "8250/16550 device discovery via ACPI namespace"
+ default y if IA64
+ depends on ACPI_BUS && SERIAL_8250
+ ---help---
+ If you wish to enable serial port discovery via the ACPI
+ namespace, say Y here. If unsure, say N.
+
+config SERIAL_8250_NR_UARTS
+ int "Maximum number of non-legacy 8250/16550 serial ports"
+ depends on SERIAL_8250
+ default "4"
+ ---help---
+ Set this to the number of non-legacy serial ports you want
+ the driver to support. This includes any ports discovered
+ via ACPI or PCI enumeration and any ports that may be added
+ at run-time via hot-plug.
+
+config SERIAL_8250_EXTENDED
+ bool "Extended 8250/16550 serial driver options"
+ depends on SERIAL_8250
+ help
+ If you wish to use any non-standard features of the standard "dumb"
+ driver, say Y here. This includes HUB6 support, shared serial
+ interrupts, special multiport support, support for more than the
+ four COM 1/2/3/4 boards, etc.
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about serial driver options. If unsure, say N.
+
+config SERIAL_8250_MANY_PORTS
+ bool "Support more than 4 legacy serial ports"
+ depends on SERIAL_8250_EXTENDED && !IA64
+ help
+ Say Y here if you have dumb serial boards other than the four
+ standard COM 1/2/3/4 ports. This may happen if you have an AST
+ FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available
+ from <http://www.tldp.org/docs.html#howto>), or other custom
+ serial port hardware which acts similar to standard serial port
+ hardware. If you only use the standard COM 1/2/3/4 ports, you can
+ say N here to save some memory. You can also say Y if you have an
+ "intelligent" multiport card such as Cyclades, Digiboards, etc.
+
+config SERIAL_8250_SHARE_IRQ
+ bool "Support for sharing serial interrupts"
+ depends on SERIAL_8250_EXTENDED
+ help
+ Some serial boards have hardware support which allows multiple dumb
+ serial ports on the same board to share a single IRQ. To enable
+ support for this in the serial driver, say Y here.
+
+config SERIAL_8250_DETECT_IRQ
+ bool "Autodetect IRQ on standard ports (unsafe)"
+ depends on SERIAL_8250_EXTENDED
+ help
+ Say Y here if you want the kernel to try to guess which IRQ
+ to use for your serial port.
+
+ This is considered unsafe; it is far better to configure the IRQ in
+ a boot script using the setserial command.
+
+ If unsure, say N.
+
+config SERIAL_8250_MULTIPORT
+ bool "Support special multiport boards"
+ depends on SERIAL_8250_EXTENDED
+ help
+ Some multiport serial ports have special ports which are used to
+ signal when there are any serial ports on the board which need
+ servicing. Say Y here to enable the serial driver to take advantage
+ of those special I/O ports.
+
+config SERIAL_8250_RSA
+ bool "Support RSA serial ports"
+ depends on SERIAL_8250_EXTENDED
+ help
+ ::: To be written :::
+
+comment "Non-8250 serial port support"
+
+config SERIAL_8250_ACORN
+ tristate "Acorn expansion card serial port support"
+ depends on ARM && ARCH_ACORN && SERIAL_8250
+ help
+ If you have an Atomwide Serial card or Serial Port card for an Acorn
+ system, say Y to this option. The driver can handle 1, 2, or 3 port
+ cards. If unsure, say N.
+
+config SERIAL_AMBA_PL010
+ tristate "ARM AMBA PL010 serial port support"
+ depends on ARM_AMBA
+ select SERIAL_CORE
+ help
+ This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
+ an Integrator/AP or Integrator/PP2 platform, say Y or M here.
+
+ If unsure, say N.
+
+config SERIAL_AMBA_PL010_CONSOLE
+ bool "Support for console on AMBA serial port"
+ depends on SERIAL_AMBA_PL010=y
+ select SERIAL_CORE_CONSOLE
+ ---help---
+ Say Y here if you wish to use an AMBA PrimeCell UART as the system
+ console (the system console is the device which receives all kernel
+ messages and warnings and which allows logins in single user mode).
+
+ Even if you say Y here, the currently visible framebuffer console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttyAM0". (Try "man bootparam" or see the documentation of
+ your boot loader (lilo or loadlin) about how to pass options to the
+ kernel at boot time.)
+
+config SERIAL_AMBA_PL011
+ tristate "ARM AMBA PL011 serial port support"
+ depends on ARM_AMBA
+ select SERIAL_CORE
+ help
+ This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have
+ an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M
+ here.
+
+ If unsure, say N.
+
+config SERIAL_AMBA_PL011_CONSOLE
+ bool "Support for console on AMBA serial port"
+ depends on SERIAL_AMBA_PL011=y
+ select SERIAL_CORE_CONSOLE
+ ---help---
+ Say Y here if you wish to use an AMBA PrimeCell UART as the system
+ console (the system console is the device which receives all kernel
+ messages and warnings and which allows logins in single user mode).
+
+ Even if you say Y here, the currently visible framebuffer console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttyAM0". (Try "man bootparam" or see the documentation of
+ your boot loader (lilo or loadlin) about how to pass options to the
+ kernel at boot time.)
+
+config SERIAL_CLPS711X
+ tristate "CLPS711X serial port support"
+ depends on ARM && ARCH_CLPS711X
+ select SERIAL_CORE
+ help
+ ::: To be written :::
+
+config SERIAL_CLPS711X_CONSOLE
+ bool "Support for console on CLPS711X serial port"
+ depends on SERIAL_CLPS711X=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Even if you say Y here, the currently visible virtual console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttyCL1". (Try "man bootparam" or see the documentation of
+ your boot loader (lilo or loadlin) about how to pass options to the
+ kernel at boot time.)
+
+config SERIAL_S3C2410
+ tristate "Samsung S3C2410 Serial port support"
+ depends on ARM && ARCH_S3C2410
+ select SERIAL_CORE
+ help
+ Support for the on-chip UARTs on the Samsung S3C2410X CPU,
+ providing /dev/ttySAC0, 1 and 2 (note, some machines may not
+ provide all of these ports, depending on how the serial port
+ pins are configured.
+
+config SERIAL_S3C2410_CONSOLE
+ bool "Support for console on S3C2410 serial port"
+ depends on SERIAL_S3C2410=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Allow selection of the S3C2410 on-board serial ports for use as
+ an virtual console.
+
+ Even if you say Y here, the currently visible virtual console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttySACx". (Try "man bootparam" or see the documentation of
+ your boot loader about how to pass options to the kernel at
+ boot time.)
+
+config SERIAL_BAST_SIO
+ bool "Support for BAST SuperIO serial ports"
+ depends on ARCH_BAST && SERIAL_8250=y
+ help
+ Support for registerin the SuperIO chip on BAST board with
+ the 8250/16550 uart code.
+
+config SERIAL_DZ
+ bool "DECstation DZ serial driver"
+ depends on MACH_DECSTATION && MIPS32
+ select SERIAL_CORE
+ help
+ DZ11-family serial controllers for VAXstations, including the
+ DC7085, M7814, and M7819.
+
+config SERIAL_DZ_CONSOLE
+ bool "Support console on DECstation DZ serial driver"
+ depends on SERIAL_DZ=y
+ select SERIAL_CORE_CONSOLE
+ help
+ If you say Y here, it will be possible to use a serial port as the
+ system console (the system console is the device which receives all
+ kernel messages and warnings and which allows logins in single user
+ mode). Note that the firmware uses ttyS0 as the serial console on
+ the Maxine and ttyS2 on the others.
+
+ If unsure, say Y.
+
+config SERIAL_21285
+ tristate "DC21285 serial port support"
+ depends on ARM && FOOTBRIDGE
+ select SERIAL_CORE
+ help
+ If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
+ PCI bridge you can enable its onboard serial port by enabling this
+ option.
+
+config SERIAL_21285_CONSOLE
+ bool "Console on DC21285 serial port"
+ depends on SERIAL_21285=y
+ select SERIAL_CORE_CONSOLE
+ help
+ If you have enabled the serial port on the 21285 footbridge you can
+ make it the console by answering Y to this option.
+
+ Even if you say Y here, the currently visible virtual console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttyFB". (Try "man bootparam" or see the documentation of
+ your boot loader (lilo or loadlin) about how to pass options to the
+ kernel at boot time.)
+
+config SERIAL_UART00
+ bool "Excalibur serial port (uart00) support"
+ depends on ARM && ARCH_CAMELOT
+ select SERIAL_CORE
+ help
+ Say Y here if you want to use the hard logic uart on Excalibur. This
+ driver also supports soft logic implementations of this uart core.
+
+config SERIAL_UART00_CONSOLE
+ bool "Support for console on Excalibur serial port"
+ depends on SERIAL_UART00
+ select SERIAL_CORE_CONSOLE
+ help
+ Say Y here if you want to support a serial console on an Excalibur
+ hard logic uart or uart00 IP core.
+
+ Even if you say Y here, the currently visible virtual console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttyS1". (Try "man bootparam" or see the documentation of
+ your boot loader (lilo or loadlin) about how to pass options to the
+ kernel at boot time.)
+
+config SERIAL_MPSC
+ bool "Marvell MPSC serial port support"
+ depends on PPC32 && MV64X60
+ select SERIAL_CORE
+ help
+ Say Y here if you want to use the Marvell MPSC serial controller.
+
+config SERIAL_MPSC_CONSOLE
+ bool "Support for console on Marvell MPSC serial port"
+ depends on SERIAL_MPSC
+ select SERIAL_CORE_CONSOLE
+ help
+ Say Y here if you want to support a serial console on a Marvell MPSC.
+
+config SERIAL_PXA
+ bool "PXA serial port support"
+ depends on ARM && ARCH_PXA
+ select SERIAL_CORE
+ help
+ If you have a machine based on an Intel XScale PXA2xx CPU you
+ can enable its onboard serial ports by enabling this option.
+
+config SERIAL_PXA_CONSOLE
+ bool "Console on PXA serial port"
+ depends on SERIAL_PXA
+ select SERIAL_CORE_CONSOLE
+ help
+ If you have enabled the serial port on the Intel XScale PXA
+ CPU you can make it the console by answering Y to this option.
+
+ Even if you say Y here, the currently visible virtual console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttySA0". (Try "man bootparam" or see the documentation of
+ your boot loader (lilo or loadlin) about how to pass options to the
+ kernel at boot time.)
+
+config SERIAL_SA1100
+ bool "SA1100 serial port support"
+ depends on ARM && ARCH_SA1100
+ select SERIAL_CORE
+ help
+ If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
+ can enable its onboard serial port by enabling this option.
+ Please read <file:Documentation/arm/SA1100/serial_UART> for further
+ info.
+
+config SERIAL_SA1100_CONSOLE
+ bool "Console on SA1100 serial port"
+ depends on SERIAL_SA1100
+ select SERIAL_CORE_CONSOLE
+ help
+ If you have enabled the serial port on the SA1100/SA1110 StrongARM
+ CPU you can make it the console by answering Y to this option.
+
+ Even if you say Y here, the currently visible virtual console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttySA0". (Try "man bootparam" or see the documentation of
+ your boot loader (lilo or loadlin) about how to pass options to the
+ kernel at boot time.)
+
+config SERIAL_IMX
+ bool "IMX serial port support"
+ depends on ARM && ARCH_IMX
+ select SERIAL_CORE
+ help
+ If you have a machine based on a Motorola IMX CPU you
+ can enable its onboard serial port by enabling this option.
+
+config SERIAL_IMX_CONSOLE
+ bool "Console on IMX serial port"
+ depends on SERIAL_IMX
+ select SERIAL_CORE_CONSOLE
+ help
+ If you have enabled the serial port on the Motorola IMX
+ CPU you can make it the console by answering Y to this option.
+
+ Even if you say Y here, the currently visible virtual console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttySA0". (Try "man bootparam" or see the documentation of
+ your boot loader (lilo or loadlin) about how to pass options to the
+ kernel at boot time.)
+
+config SERIAL_SUNCORE
+ bool
+ depends on SPARC32 || SPARC64
+ select SERIAL_CORE
+ select SERIAL_CORE_CONSOLE
+ default y
+
+config SERIAL_SUNZILOG
+ tristate "Sun Zilog8530 serial support"
+ depends on SPARC32 || SPARC64
+ help
+ This driver supports the Zilog8530 serial ports found on many Sparc
+ systems. Say Y or M if you want to be able to these serial ports.
+
+config SERIAL_SUNZILOG_CONSOLE
+ bool "Console on Sun Zilog8530 serial port"
+ depends on SERIAL_SUNZILOG=y
+ help
+ If you would like to be able to use the Zilog8530 serial port
+ on your Sparc system as the console, you can do so by answering
+ Y to this option.
+
+config SERIAL_SUNSU
+ tristate "Sun SU serial support"
+ depends on (SPARC32 || SPARC64) && PCI
+ help
+ This driver supports the 8250 serial ports that run the keyboard and
+ mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able
+ to these serial ports.
+
+config SERIAL_SUNSU_CONSOLE
+ bool "Console on Sun SU serial port"
+ depends on SERIAL_SUNSU=y
+ help
+ If you would like to be able to use the SU serial port
+ on your Sparc system as the console, you can do so by answering
+ Y to this option.
+
+config SERIAL_MUX
+ tristate "Serial MUX support"
+ depends on PARISC
+ select SERIAL_CORE
+ default y
+ ---help---
+ Saying Y here will enable the hardware MUX serial driver for
+ the Nova and K class systems. The hardware MUX is not 8250/16550
+ compatible therefore the /dev/ttyB0 device is shared between the
+ Serial MUX and the PDC software console. The following steps
+ need to be completed to use the Serial MUX:
+
+ 1. create the device entry (mknod /dev/ttyB0 c 11 0)
+ 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
+ 3. Add device ttyB0 to /etc/securetty (if you want to log on as
+ root on this console.)
+ 4. Change the kernel command console parameter to: console=ttyB0
+
+config SERIAL_MUX_CONSOLE
+ bool "Support for console on serial MUX"
+ depends on SERIAL_MUX
+ select SERIAL_CORE_CONSOLE
+ default y
+
+config PDC_CONSOLE
+ bool "PDC software console support"
+ depends on PARISC && !SERIAL_MUX && VT
+ default n
+ help
+ Saying Y here will enable the software based PDC console to be
+ used as the system console. This is useful for machines in
+ which the hardware based console has not been written yet. The
+ following steps must be competed to use the PDC console:
+
+ 1. create the device entry (mknod /dev/ttyB0 c 11 0)
+ 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
+ 3. Add device ttyB0 to /etc/securetty (if you want to log on as
+ root on this console.)
+ 4. Change the kernel command console parameter to: console=ttyB0
+
+config SERIAL_SUNSAB
+ tristate "Sun Siemens SAB82532 serial support"
+ depends on (SPARC32 || SPARC64) && PCI
+ help
+ This driver supports the Siemens SAB82532 DUSCC serial ports on newer
+ (PCI) UltraSPARC systems. Say Y or M if you want to be able to these
+ serial ports.
+
+config SERIAL_SUNSAB_CONSOLE
+ bool "Console on Sun Siemens SAB82532 serial port"
+ depends on SERIAL_SUNSAB=y
+ help
+ If you would like to be able to use the SAB82532 serial port
+ on your Sparc system as the console, you can do so by answering
+ Y to this option.
+
+config SERIAL_IP22_ZILOG
+ tristate "IP22 Zilog8530 serial support"
+ depends on SGI_IP22
+ select SERIAL_CORE
+ help
+ This driver supports the Zilog8530 serial ports found on SGI IP22
+ systems. Say Y or M if you want to be able to these serial ports.
+
+config SERIAL_IP22_ZILOG_CONSOLE
+ bool "Console on IP22 Zilog8530 serial port"
+ depends on SERIAL_IP22_ZILOG=y
+ select SERIAL_CORE_CONSOLE
+
+config V850E_UART
+ bool "NEC V850E on-chip UART support"
+ depends on V850E_MA1 || V850E_ME2 || V850E_TEG || V850E2_ANNA || V850E_AS85EP1
+ select SERIAL_CORE
+ default y
+
+config V850E_UARTB
+ bool
+ depends V850E_UART && V850E_ME2
+ default y
+
+config V850E_UART_CONSOLE
+ bool "Use NEC V850E on-chip UART for console"
+ depends on V850E_UART
+ select SERIAL_CORE_CONSOLE
+
+config SERIAL_SH_SCI
+ tristate "SH SCI(F) serial port support"
+ depends on SUPERH || H8300
+ select SERIAL_CORE
+
+config SERIAL_SH_SCI_CONSOLE
+ bool "Support for console on SH SCI(F)"
+ depends on SERIAL_SH_SCI=y
+ select SERIAL_CORE_CONSOLE
+
+config SERIAL_AU1X00
+ bool "Enable Au1x00 UART Support"
+ depends on MIPS && SOC_AU1X00
+ select SERIAL_CORE
+ help
+ If you have an Alchemy AU1X00 processor (MIPS based) and you want
+ to use serial ports, say Y. Otherwise, say N.
+
+config SERIAL_AU1X00_CONSOLE
+ bool "Enable Au1x00 serial console"
+ depends on SERIAL_AU1X00
+ select SERIAL_CORE_CONSOLE
+ help
+ If you have an Alchemy AU1X00 processor (MIPS based) and you want
+ to use a console on a serial port, say Y. Otherwise, say N.
+
+config SERIAL_CORE
+ tristate
+
+config SERIAL_CORE_CONSOLE
+ bool
+
+config SERIAL_68328
+ bool "68328 serial support"
+ depends on M68328 || M68EZ328 || M68VZ328
+ help
+ This driver supports the built-in serial port of the Motorola 68328
+ (standard, EZ and VZ varities).
+
+config SERIAL_68328_RTS_CTS
+ bool "Support RTS/CTS on 68328 serial port"
+ depends on SERIAL_68328
+
+config SERIAL_COLDFIRE
+ bool "ColdFire serial support"
+ depends on COLDFIRE
+ help
+ This driver supports the built-in serial ports of the Motorola ColdFire
+ family of CPUs.
+
+config SERIAL_68360_SMC
+ bool "68360 SMC uart support"
+ depends on M68360
+ help
+ This driver supports the SMC serial ports of the Motorola 68360 CPU.
+
+config SERIAL_68360_SCC
+ bool "68360 SCC uart support"
+ depends on M68360
+ help
+ This driver supports the SCC serial ports of the Motorola 68360 CPU.
+
+config SERIAL_68360
+ bool
+ depends on SERIAL_68360_SMC || SERIAL_68360_SCC
+ default y
+
+config SERIAL_PMACZILOG
+ tristate "PowerMac z85c30 ESCC support"
+ depends on PPC_OF && PPC_PMAC
+ select SERIAL_CORE
+ help
+ This driver supports the Zilog z85C30 serial ports found on
+ PowerMac machines.
+ Say Y or M if you want to be able to these serial ports.
+
+config SERIAL_PMACZILOG_CONSOLE
+ bool "Console on PowerMac z85c30 serial port"
+ depends on SERIAL_PMACZILOG=y
+ select SERIAL_CORE_CONSOLE
+ help
+ If you would like to be able to use the z85c30 serial port
+ on your PowerMac as the console, you can do so by answering
+ Y to this option.
+
+config SERIAL_LH7A40X
+ tristate "Sharp LH7A40X embedded UART support"
+ depends on ARM && ARCH_LH7A40X
+ select SERIAL_CORE
+ help
+ This enables support for the three on-board UARTs of the
+ Sharp LH7A40X series CPUs. Choose Y or M.
+
+config SERIAL_LH7A40X_CONSOLE
+ bool "Support for console on Sharp LH7A40X serial port"
+ depends on SERIAL_LH7A40X=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Say Y here if you wish to use one of the serial ports as the
+ system console--the system console is the device which
+ receives all kernel messages and warnings and which allows
+ logins in single user mode.
+
+ Even if you say Y here, the currently visible framebuffer console
+ (/dev/tty0) will still be used as the default system console, but
+ you can alter that using a kernel command line, for example
+ "console=ttyAM1".
+
+config SERIAL_CPM
+ tristate "CPM SCC/SMC serial port support"
+ depends on CPM2 || 8xx
+ select SERIAL_CORE
+ help
+ This driver supports the SCC and SMC serial ports on Motorola
+ embedded PowerPC that contain a CPM1 (8xx) or CPM2 (8xxx)
+
+config SERIAL_CPM_CONSOLE
+ bool "Support for console on CPM SCC/SMC serial port"
+ depends on SERIAL_CPM=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Say Y here if you wish to use a SCC or SMC CPM UART as the system
+ console (the system console is the device which receives all kernel
+ messages and warnings and which allows logins in single user mode).
+
+ Even if you say Y here, the currently visible framebuffer console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttyCPM0". (Try "man bootparam" or see the documentation of
+ your boot loader (lilo or loadlin) about how to pass options to the
+ kernel at boot time.)
+
+config SERIAL_CPM_SCC1
+ bool "Support for SCC1 serial port"
+ depends on SERIAL_CPM=y
+ help
+ Select the is option to use SCC1 as a serial port
+
+config SERIAL_CPM_SCC2
+ bool "Support for SCC2 serial port"
+ depends on SERIAL_CPM=y
+ help
+ Select the is option to use SCC2 as a serial port
+
+config SERIAL_CPM_SCC3
+ bool "Support for SCC3 serial port"
+ depends on SERIAL_CPM=y
+ help
+ Select the is option to use SCC3 as a serial port
+
+config SERIAL_CPM_SCC4
+ bool "Support for SCC4 serial port"
+ depends on SERIAL_CPM=y
+ help
+ Select the is option to use SCC4 as a serial port
+
+config SERIAL_CPM_SMC1
+ bool "Support for SMC1 serial port"
+ depends on SERIAL_CPM=y
+ help
+ Select the is option to use SMC1 as a serial port
+
+config SERIAL_CPM_SMC2
+ bool "Support for SMC2 serial port"
+ depends on SERIAL_CPM=y
+ help
+ Select the is option to use SMC2 as a serial port
+
+config SERIAL_SGI_L1_CONSOLE
+ bool "SGI Altix L1 serial console support"
+ depends on IA64_GENERIC || IA64_SGI_SN2
+ select SERIAL_CORE
+ select SERIAL_CORE_CONSOLE
+ help
+ If you have an SGI Altix and you would like to use the system
+ controller serial port as your console (you want this!),
+ say Y. Otherwise, say N.
+
+config SERIAL_MPC52xx
+ tristate "Freescale MPC52xx family PSC serial support"
+ depends on PPC_MPC52xx
+ select SERIAL_CORE
+ help
+ This drivers support the MPC52xx PSC serial ports. If you would
+ like to use them, you must answer Y or M to this option. Not that
+ for use as console, it must be included in kernel and not as a
+ module.
+
+config SERIAL_MPC52xx_CONSOLE
+ bool "Console on a Freescale MPC52xx family PSC serial port"
+ depends on SERIAL_MPC52xx=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Select this options if you'd like to use one of the PSC serial port
+ of the Freescale MPC52xx family as a console.
+
+config SERIAL_MPC52xx_CONSOLE_BAUD
+ int "Freescale MPC52xx family PSC serial port baud"
+ depends on SERIAL_MPC52xx_CONSOLE=y
+ default "9600"
+ help
+ Select the MPC52xx console baud rate.
+ This value is only used if the bootloader doesn't pass in the
+ console baudrate
+
+config SERIAL_ICOM
+ tristate "IBM Multiport Serial Adapter"
+ depends on PPC_ISERIES || PPC_PSERIES
+ select SERIAL_CORE
+ help
+ This driver is for a family of multiport serial adapters
+ including 2 port RVX, 2 port internal modem, 4 port internal
+ modem and a split 1 port RVX and 1 port internal modem.
+
+ This driver can also be built as a module. If so, the module
+ will be called icom.
+
+config SERIAL_M32R_SIO
+ bool "M32R SIO I/F"
+ depends on M32R
+ default y
+ select SERIAL_CORE
+ help
+ Say Y here if you want to use the M32R serial controller.
+
+config SERIAL_M32R_SIO_CONSOLE
+ bool "use SIO console"
+ depends on SERIAL_M32R_SIO=y
+ select SERIAL_CORE_CONSOLE
+ help
+ Say Y here if you want to support a serial console.
+
+ If you use an M3T-M32700UT or an OPSPUT platform,
+ please say also y for SERIAL_M32R_PLDSIO.
+
+config SERIAL_M32R_PLDSIO
+ bool "M32R SIO I/F on a PLD"
+ depends on SERIAL_M32R_SIO=y
+ default n
+ help
+ Say Y here if you want to use the M32R serial controller
+ on a PLD (Programmable Logic Device).
+
+ If you use an M3T-M32700UT or an OPSPUT platform,
+ please say Y.
+
+config SERIAL_TXX9
+ bool "TMPTX39XX/49XX SIO support"
+ depends HAS_TXX9_SERIAL
+ select SERIAL_CORE
+ default y
+
+config HAS_TXX9_SERIAL
+ bool
+
+config SERIAL_TXX9_CONSOLE
+ bool "TMPTX39XX/49XX SIO Console support"
+ depends on SERIAL_TXX9=y
+ select SERIAL_CORE_CONSOLE
+
+config SERIAL_TXX9_STDSERIAL
+ bool "TX39XX/49XX SIO act as standard serial"
+ depends on !SERIAL_8250 && SERIAL_TXX9
+
+config SERIAL_VR41XX
+ tristate "NEC VR4100 series Serial Interface Unit support"
+ depends on CPU_VR41XX
+ select SERIAL_CORE
+ help
+ If you have a NEC VR4100 series processor and you want to use
+ Serial Interface Unit(SIU) or Debug Serial Interface Unit(DSIU)
+ (not include VR4111/VR4121 DSIU), say Y. Otherwise, say N.
+
+config SERIAL_VR41XX_CONSOLE
+ bool "Enable NEC VR4100 series Serial Interface Unit console"
+ depends on SERIAL_VR41XX
+ select SERIAL_CORE_CONSOLE
+ help
+ If you have a NEC VR4100 series processor and you want to use
+ a console on a serial port, say Y. Otherwise, say N.
+
+config SERIAL_JSM
+ tristate "Digi International NEO PCI Support"
+ depends on PCI
+ select SERIAL_CORE
+ help
+ This is a driver for Digi International's Neo series
+ of cards which provide multiple serial ports. You would need
+ something like this to connect more than two modems to your Linux
+ box, for instance in order to become a dial-in server. This driver
+ supports PCI boards only.
+ If you have a card like this, say Y here and read the file
+ <file:Documentation/jsm.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called jsm.
+
+endmenu
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
new file mode 100644
index 00000000000..81b77d769b8
--- /dev/null
+++ b/drivers/serial/Makefile
@@ -0,0 +1,54 @@
+#
+# Makefile for the kernel serial device drivers.
+#
+# $Id: Makefile,v 1.8 2002/07/21 21:32:30 rmk Exp $
+#
+
+serial-8250-y :=
+serial-8250-$(CONFIG_SERIAL_8250_ACPI) += 8250_acpi.o
+serial-8250-$(CONFIG_PNP) += 8250_pnp.o
+serial-8250-$(CONFIG_GSC) += 8250_gsc.o
+serial-8250-$(CONFIG_PCI) += 8250_pci.o
+serial-8250-$(CONFIG_HP300) += 8250_hp300.o
+
+obj-$(CONFIG_SERIAL_CORE) += serial_core.o
+obj-$(CONFIG_SERIAL_21285) += 21285.o
+obj-$(CONFIG_SERIAL_8250) += 8250.o $(serial-8250-y)
+obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o
+obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o
+obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o
+obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
+obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
+obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
+obj-$(CONFIG_SERIAL_PXA) += pxa.o
+obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
+obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
+obj-$(CONFIG_SERIAL_UART00) += uart00.o
+obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o
+obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o
+obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
+obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o
+obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o
+obj-$(CONFIG_SERIAL_MUX) += mux.o
+obj-$(CONFIG_SERIAL_68328) += 68328serial.o
+obj-$(CONFIG_SERIAL_68360) += 68360serial.o
+obj-$(CONFIG_SERIAL_COLDFIRE) += mcfserial.o
+obj-$(CONFIG_V850E_UART) += v850e_uart.o
+obj-$(CONFIG_SERIAL_PMACZILOG) += pmac_zilog.o
+obj-$(CONFIG_SERIAL_LH7A40X) += serial_lh7a40x.o
+obj-$(CONFIG_SERIAL_AU1X00) += au1x00_uart.o
+obj-$(CONFIG_SERIAL_DZ) += dz.o
+obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o
+obj-$(CONFIG_SERIAL_BAST_SIO) += bast_sio.o
+obj-$(CONFIG_SERIAL_SGI_L1_CONSOLE) += sn_console.o
+obj-$(CONFIG_SERIAL_CPM) += cpm_uart/
+obj-$(CONFIG_SERIAL_IMX) += imx.o
+obj-$(CONFIG_SERIAL_MPC52xx) += mpc52xx_uart.o
+obj-$(CONFIG_SERIAL_ICOM) += icom.o
+obj-$(CONFIG_SERIAL_M32R_SIO) += m32r_sio.o
+obj-$(CONFIG_SERIAL_MPSC) += mpsc.o
+obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o
+obj-$(CONFIG_SERIAL_JSM) += jsm/
+obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o
+obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o
+obj-$(CONFIG_BLK_DEV_SGIIOC4) += ioc4_serial.o
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
new file mode 100644
index 00000000000..ac57fdc8711
--- /dev/null
+++ b/drivers/serial/amba-pl010.c
@@ -0,0 +1,840 @@
+/*
+ * linux/drivers/char/amba.c
+ *
+ * Driver for AMBA serial ports
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ * Copyright 1999 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * $Id: amba.c,v 1.41 2002/07/28 10:03:27 rmk Exp $
+ *
+ * This is a generic driver for ARM AMBA-type serial ports. They
+ * have a lot of 16550-like features, but are not register compatible.
+ * Note that although they do have CTS, DCD and DSR inputs, they do
+ * not have an RI input, nor do they have DTR or RTS outputs. If
+ * required, these have to be supplied via some other means (eg, GPIO)
+ * and hooked into this driver.
+ */
+#include <linux/config.h>
+
+#if defined(CONFIG_SERIAL_AMBA_PL010_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/hardware/amba.h>
+#include <asm/hardware/amba_serial.h>
+
+#define UART_NR 2
+
+#define SERIAL_AMBA_MAJOR 204
+#define SERIAL_AMBA_MINOR 16
+#define SERIAL_AMBA_NR UART_NR
+
+#define AMBA_ISR_PASS_LIMIT 256
+
+/*
+ * Access macros for the AMBA UARTs
+ */
+#define UART_GET_INT_STATUS(p) readb((p)->membase + UART010_IIR)
+#define UART_PUT_ICR(p, c) writel((c), (p)->membase + UART010_ICR)
+#define UART_GET_FR(p) readb((p)->membase + UART01x_FR)
+#define UART_GET_CHAR(p) readb((p)->membase + UART01x_DR)
+#define UART_PUT_CHAR(p, c) writel((c), (p)->membase + UART01x_DR)
+#define UART_GET_RSR(p) readb((p)->membase + UART01x_RSR)
+#define UART_GET_CR(p) readb((p)->membase + UART010_CR)
+#define UART_PUT_CR(p,c) writel((c), (p)->membase + UART010_CR)
+#define UART_GET_LCRL(p) readb((p)->membase + UART010_LCRL)
+#define UART_PUT_LCRL(p,c) writel((c), (p)->membase + UART010_LCRL)
+#define UART_GET_LCRM(p) readb((p)->membase + UART010_LCRM)
+#define UART_PUT_LCRM(p,c) writel((c), (p)->membase + UART010_LCRM)
+#define UART_GET_LCRH(p) readb((p)->membase + UART010_LCRH)
+#define UART_PUT_LCRH(p,c) writel((c), (p)->membase + UART010_LCRH)
+#define UART_RX_DATA(s) (((s) & UART01x_FR_RXFE) == 0)
+#define UART_TX_READY(s) (((s) & UART01x_FR_TXFF) == 0)
+#define UART_TX_EMPTY(p) ((UART_GET_FR(p) & UART01x_FR_TMSK) == 0)
+
+#define UART_DUMMY_RSR_RX /*256*/0
+#define UART_PORT_SIZE 64
+
+/*
+ * On the Integrator platform, the port RTS and DTR are provided by
+ * bits in the following SC_CTRLS register bits:
+ * RTS DTR
+ * UART0 7 6
+ * UART1 5 4
+ */
+#define SC_CTRLC (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLC_OFFSET)
+#define SC_CTRLS (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLS_OFFSET)
+
+/*
+ * We wrap our port structure around the generic uart_port.
+ */
+struct uart_amba_port {
+ struct uart_port port;
+ unsigned int dtr_mask;
+ unsigned int rts_mask;
+ unsigned int old_status;
+};
+
+static void pl010_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ unsigned int cr;
+
+ cr = UART_GET_CR(port);
+ cr &= ~UART010_CR_TIE;
+ UART_PUT_CR(port, cr);
+}
+
+static void pl010_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+ unsigned int cr;
+
+ cr = UART_GET_CR(port);
+ cr |= UART010_CR_TIE;
+ UART_PUT_CR(port, cr);
+}
+
+static void pl010_stop_rx(struct uart_port *port)
+{
+ unsigned int cr;
+
+ cr = UART_GET_CR(port);
+ cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
+ UART_PUT_CR(port, cr);
+}
+
+static void pl010_enable_ms(struct uart_port *port)
+{
+ unsigned int cr;
+
+ cr = UART_GET_CR(port);
+ cr |= UART010_CR_MSIE;
+ UART_PUT_CR(port, cr);
+}
+
+static void
+#ifdef SUPPORT_SYSRQ
+pl010_rx_chars(struct uart_port *port, struct pt_regs *regs)
+#else
+pl010_rx_chars(struct uart_port *port)
+#endif
+{
+ struct tty_struct *tty = port->info->tty;
+ unsigned int status, ch, flag, rsr, max_count = 256;
+
+ status = UART_GET_FR(port);
+ while (UART_RX_DATA(status) && max_count--) {
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
+ if (tty->low_latency)
+ tty_flip_buffer_push(tty);
+ /*
+ * If this failed then we will throw away the
+ * bytes but must do so to clear interrupts.
+ */
+ }
+
+ ch = UART_GET_CHAR(port);
+ flag = TTY_NORMAL;
+
+ port->icount.rx++;
+
+ /*
+ * Note that the error handling code is
+ * out of the main execution path
+ */
+ rsr = UART_GET_RSR(port) | UART_DUMMY_RSR_RX;
+ if (rsr & UART01x_RSR_ANY) {
+ if (rsr & UART01x_RSR_BE) {
+ rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
+ port->icount.brk++;
+ if (uart_handle_break(port))
+ goto ignore_char;
+ } else if (rsr & UART01x_RSR_PE)
+ port->icount.parity++;
+ else if (rsr & UART01x_RSR_FE)
+ port->icount.frame++;
+ if (rsr & UART01x_RSR_OE)
+ port->icount.overrun++;
+
+ rsr &= port->read_status_mask;
+
+ if (rsr & UART01x_RSR_BE)
+ flag = TTY_BREAK;
+ else if (rsr & UART01x_RSR_PE)
+ flag = TTY_PARITY;
+ else if (rsr & UART01x_RSR_FE)
+ flag = TTY_FRAME;
+ }
+
+ if (uart_handle_sysrq_char(port, ch, regs))
+ goto ignore_char;
+
+ if ((rsr & port->ignore_status_mask) == 0) {
+ tty_insert_flip_char(tty, ch, flag);
+ }
+ if ((rsr & UART01x_RSR_OE) &&
+ tty->flip.count < TTY_FLIPBUF_SIZE) {
+ /*
+ * Overrun is special, since it's reported
+ * immediately, and doesn't affect the current
+ * character
+ */
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ }
+ ignore_char:
+ status = UART_GET_FR(port);
+ }
+ tty_flip_buffer_push(tty);
+ return;
+}
+
+static void pl010_tx_chars(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->info->xmit;
+ int count;
+
+ if (port->x_char) {
+ UART_PUT_CHAR(port, port->x_char);
+ port->icount.tx++;
+ port->x_char = 0;
+ return;
+ }
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ pl010_stop_tx(port, 0);
+ return;
+ }
+
+ count = port->fifosize >> 1;
+ do {
+ UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ } while (--count > 0);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit))
+ pl010_stop_tx(port, 0);
+}
+
+static void pl010_modem_status(struct uart_port *port)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+ unsigned int status, delta;
+
+ UART_PUT_ICR(&uap->port, 0);
+
+ status = UART_GET_FR(&uap->port) & UART01x_FR_MODEM_ANY;
+
+ delta = status ^ uap->old_status;
+ uap->old_status = status;
+
+ if (!delta)
+ return;
+
+ if (delta & UART01x_FR_DCD)
+ uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD);
+
+ if (delta & UART01x_FR_DSR)
+ uap->port.icount.dsr++;
+
+ if (delta & UART01x_FR_CTS)
+ uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS);
+
+ wake_up_interruptible(&uap->port.info->delta_msr_wait);
+}
+
+static irqreturn_t pl010_int(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct uart_port *port = dev_id;
+ unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT;
+ int handled = 0;
+
+ spin_lock(&port->lock);
+
+ status = UART_GET_INT_STATUS(port);
+ if (status) {
+ do {
+ if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
+#ifdef SUPPORT_SYSRQ
+ pl010_rx_chars(port, regs);
+#else
+ pl010_rx_chars(port);
+#endif
+ if (status & UART010_IIR_MIS)
+ pl010_modem_status(port);
+ if (status & UART010_IIR_TIS)
+ pl010_tx_chars(port);
+
+ if (pass_counter-- == 0)
+ break;
+
+ status = UART_GET_INT_STATUS(port);
+ } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
+ UART010_IIR_TIS));
+ handled = 1;
+ }
+
+ spin_unlock(&port->lock);
+
+ return IRQ_RETVAL(handled);
+}
+
+static unsigned int pl010_tx_empty(struct uart_port *port)
+{
+ return UART_GET_FR(port) & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
+}
+
+static unsigned int pl010_get_mctrl(struct uart_port *port)
+{
+ unsigned int result = 0;
+ unsigned int status;
+
+ status = UART_GET_FR(port);
+ if (status & UART01x_FR_DCD)
+ result |= TIOCM_CAR;
+ if (status & UART01x_FR_DSR)
+ result |= TIOCM_DSR;
+ if (status & UART01x_FR_CTS)
+ result |= TIOCM_CTS;
+
+ return result;
+}
+
+static void pl010_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+ unsigned int ctrls = 0, ctrlc = 0;
+
+ if (mctrl & TIOCM_RTS)
+ ctrlc |= uap->rts_mask;
+ else
+ ctrls |= uap->rts_mask;
+
+ if (mctrl & TIOCM_DTR)
+ ctrlc |= uap->dtr_mask;
+ else
+ ctrls |= uap->dtr_mask;
+
+ __raw_writel(ctrls, SC_CTRLS);
+ __raw_writel(ctrlc, SC_CTRLC);
+}
+
+static void pl010_break_ctl(struct uart_port *port, int break_state)
+{
+ unsigned long flags;
+ unsigned int lcr_h;
+
+ spin_lock_irqsave(&port->lock, flags);
+ lcr_h = UART_GET_LCRH(port);
+ if (break_state == -1)
+ lcr_h |= UART01x_LCRH_BRK;
+ else
+ lcr_h &= ~UART01x_LCRH_BRK;
+ UART_PUT_LCRH(port, lcr_h);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int pl010_startup(struct uart_port *port)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+ int retval;
+
+ /*
+ * Allocate the IRQ
+ */
+ retval = request_irq(port->irq, pl010_int, 0, "uart-pl010", port);
+ if (retval)
+ return retval;
+
+ /*
+ * initialise the old status of the modem signals
+ */
+ uap->old_status = UART_GET_FR(port) & UART01x_FR_MODEM_ANY;
+
+ /*
+ * Finally, enable interrupts
+ */
+ UART_PUT_CR(port, UART01x_CR_UARTEN | UART010_CR_RIE |
+ UART010_CR_RTIE);
+
+ return 0;
+}
+
+static void pl010_shutdown(struct uart_port *port)
+{
+ /*
+ * Free the interrupt
+ */
+ free_irq(port->irq, port);
+
+ /*
+ * disable all interrupts, disable the port
+ */
+ UART_PUT_CR(port, 0);
+
+ /* disable break condition and fifos */
+ UART_PUT_LCRH(port, UART_GET_LCRH(port) &
+ ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN));
+}
+
+static void
+pl010_set_termios(struct uart_port *port, struct termios *termios,
+ struct termios *old)
+{
+ unsigned int lcr_h, old_cr;
+ unsigned long flags;
+ unsigned int baud, quot;
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ quot = uart_get_divisor(port, baud);
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ lcr_h = UART01x_LCRH_WLEN_5;
+ break;
+ case CS6:
+ lcr_h = UART01x_LCRH_WLEN_6;
+ break;
+ case CS7:
+ lcr_h = UART01x_LCRH_WLEN_7;
+ break;
+ default: // CS8
+ lcr_h = UART01x_LCRH_WLEN_8;
+ break;
+ }
+ if (termios->c_cflag & CSTOPB)
+ lcr_h |= UART01x_LCRH_STP2;
+ if (termios->c_cflag & PARENB) {
+ lcr_h |= UART01x_LCRH_PEN;
+ if (!(termios->c_cflag & PARODD))
+ lcr_h |= UART01x_LCRH_EPS;
+ }
+ if (port->fifosize > 1)
+ lcr_h |= UART01x_LCRH_FEN;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ port->read_status_mask = UART01x_RSR_OE;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= UART01x_RSR_BE;
+
+ /*
+ * Characters to ignore
+ */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE;
+ if (termios->c_iflag & IGNBRK) {
+ port->ignore_status_mask |= UART01x_RSR_BE;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= UART01x_RSR_OE;
+ }
+
+ /*
+ * Ignore all characters if CREAD is not set.
+ */
+ if ((termios->c_cflag & CREAD) == 0)
+ port->ignore_status_mask |= UART_DUMMY_RSR_RX;
+
+ /* first, disable everything */
+ old_cr = UART_GET_CR(port) & ~UART010_CR_MSIE;
+
+ if (UART_ENABLE_MS(port, termios->c_cflag))
+ old_cr |= UART010_CR_MSIE;
+
+ UART_PUT_CR(port, 0);
+
+ /* Set baud rate */
+ quot -= 1;
+ UART_PUT_LCRM(port, ((quot & 0xf00) >> 8));
+ UART_PUT_LCRL(port, (quot & 0xff));
+
+ /*
+ * ----------v----------v----------v----------v-----
+ * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
+ * ----------^----------^----------^----------^-----
+ */
+ UART_PUT_LCRH(port, lcr_h);
+ UART_PUT_CR(port, old_cr);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *pl010_type(struct uart_port *port)
+{
+ return port->type == PORT_AMBA ? "AMBA" : NULL;
+}
+
+/*
+ * Release the memory region(s) being used by 'port'
+ */
+static void pl010_release_port(struct uart_port *port)
+{
+ release_mem_region(port->mapbase, UART_PORT_SIZE);
+}
+
+/*
+ * Request the memory region(s) being used by 'port'
+ */
+static int pl010_request_port(struct uart_port *port)
+{
+ return request_mem_region(port->mapbase, UART_PORT_SIZE, "uart-pl010")
+ != NULL ? 0 : -EBUSY;
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void pl010_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE) {
+ port->type = PORT_AMBA;
+ pl010_request_port(port);
+ }
+}
+
+/*
+ * verify the new serial_struct (for TIOCSSERIAL).
+ */
+static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ int ret = 0;
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA)
+ ret = -EINVAL;
+ if (ser->irq < 0 || ser->irq >= NR_IRQS)
+ ret = -EINVAL;
+ if (ser->baud_base < 9600)
+ ret = -EINVAL;
+ return ret;
+}
+
+static struct uart_ops amba_pl010_pops = {
+ .tx_empty = pl010_tx_empty,
+ .set_mctrl = pl010_set_mctrl,
+ .get_mctrl = pl010_get_mctrl,
+ .stop_tx = pl010_stop_tx,
+ .start_tx = pl010_start_tx,
+ .stop_rx = pl010_stop_rx,
+ .enable_ms = pl010_enable_ms,
+ .break_ctl = pl010_break_ctl,
+ .startup = pl010_startup,
+ .shutdown = pl010_shutdown,
+ .set_termios = pl010_set_termios,
+ .type = pl010_type,
+ .release_port = pl010_release_port,
+ .request_port = pl010_request_port,
+ .config_port = pl010_config_port,
+ .verify_port = pl010_verify_port,
+};
+
+static struct uart_amba_port amba_ports[UART_NR] = {
+ {
+ .port = {
+ .membase = (void *)IO_ADDRESS(INTEGRATOR_UART0_BASE),
+ .mapbase = INTEGRATOR_UART0_BASE,
+ .iotype = SERIAL_IO_MEM,
+ .irq = IRQ_UARTINT0,
+ .uartclk = 14745600,
+ .fifosize = 16,
+ .ops = &amba_pl010_pops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .dtr_mask = 1 << 5,
+ .rts_mask = 1 << 4,
+ },
+ {
+ .port = {
+ .membase = (void *)IO_ADDRESS(INTEGRATOR_UART1_BASE),
+ .mapbase = INTEGRATOR_UART1_BASE,
+ .iotype = SERIAL_IO_MEM,
+ .irq = IRQ_UARTINT1,
+ .uartclk = 14745600,
+ .fifosize = 16,
+ .ops = &amba_pl010_pops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 1,
+ },
+ .dtr_mask = 1 << 7,
+ .rts_mask = 1 << 6,
+ }
+};
+
+#ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
+
+static void
+pl010_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct uart_port *port = &amba_ports[co->index].port;
+ unsigned int status, old_cr;
+ int i;
+
+ /*
+ * First save the CR then disable the interrupts
+ */
+ old_cr = UART_GET_CR(port);
+ UART_PUT_CR(port, UART01x_CR_UARTEN);
+
+ /*
+ * Now, do each character
+ */
+ for (i = 0; i < count; i++) {
+ do {
+ status = UART_GET_FR(port);
+ } while (!UART_TX_READY(status));
+ UART_PUT_CHAR(port, s[i]);
+ if (s[i] == '\n') {
+ do {
+ status = UART_GET_FR(port);
+ } while (!UART_TX_READY(status));
+ UART_PUT_CHAR(port, '\r');
+ }
+ }
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the TCR
+ */
+ do {
+ status = UART_GET_FR(port);
+ } while (status & UART01x_FR_BUSY);
+ UART_PUT_CR(port, old_cr);
+}
+
+static void __init
+pl010_console_get_options(struct uart_port *port, int *baud,
+ int *parity, int *bits)
+{
+ if (UART_GET_CR(port) & UART01x_CR_UARTEN) {
+ unsigned int lcr_h, quot;
+ lcr_h = UART_GET_LCRH(port);
+
+ *parity = 'n';
+ if (lcr_h & UART01x_LCRH_PEN) {
+ if (lcr_h & UART01x_LCRH_EPS)
+ *parity = 'e';
+ else
+ *parity = 'o';
+ }
+
+ if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7)
+ *bits = 7;
+ else
+ *bits = 8;
+
+ quot = UART_GET_LCRL(port) | UART_GET_LCRM(port) << 8;
+ *baud = port->uartclk / (16 * (quot + 1));
+ }
+}
+
+static int __init pl010_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 38400;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ if (co->index >= UART_NR)
+ co->index = 0;
+ port = &amba_ports[co->index].port;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ else
+ pl010_console_get_options(port, &baud, &parity, &bits);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+extern struct uart_driver amba_reg;
+static struct console amba_console = {
+ .name = "ttyAM",
+ .write = pl010_console_write,
+ .device = uart_console_device,
+ .setup = pl010_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &amba_reg,
+};
+
+static int __init amba_console_init(void)
+{
+ /*
+ * All port initializations are done statically
+ */
+ register_console(&amba_console);
+ return 0;
+}
+console_initcall(amba_console_init);
+
+static int __init amba_late_console_init(void)
+{
+ if (!(amba_console.flags & CON_ENABLED))
+ register_console(&amba_console);
+ return 0;
+}
+late_initcall(amba_late_console_init);
+
+#define AMBA_CONSOLE &amba_console
+#else
+#define AMBA_CONSOLE NULL
+#endif
+
+static struct uart_driver amba_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "ttyAM",
+ .dev_name = "ttyAM",
+ .major = SERIAL_AMBA_MAJOR,
+ .minor = SERIAL_AMBA_MINOR,
+ .nr = UART_NR,
+ .cons = AMBA_CONSOLE,
+};
+
+static int pl010_probe(struct amba_device *dev, void *id)
+{
+ int i;
+
+ for (i = 0; i < UART_NR; i++) {
+ if (amba_ports[i].port.mapbase != dev->res.start)
+ continue;
+
+ amba_ports[i].port.dev = &dev->dev;
+ uart_add_one_port(&amba_reg, &amba_ports[i].port);
+ amba_set_drvdata(dev, &amba_ports[i]);
+ break;
+ }
+
+ return 0;
+}
+
+static int pl010_remove(struct amba_device *dev)
+{
+ struct uart_amba_port *uap = amba_get_drvdata(dev);
+
+ if (uap)
+ uart_remove_one_port(&amba_reg, &uap->port);
+
+ amba_set_drvdata(dev, NULL);
+
+ return 0;
+}
+
+static int pl010_suspend(struct amba_device *dev, u32 state)
+{
+ struct uart_amba_port *uap = amba_get_drvdata(dev);
+
+ if (uap)
+ uart_suspend_port(&amba_reg, &uap->port);
+
+ return 0;
+}
+
+static int pl010_resume(struct amba_device *dev)
+{
+ struct uart_amba_port *uap = amba_get_drvdata(dev);
+
+ if (uap)
+ uart_resume_port(&amba_reg, &uap->port);
+
+ return 0;
+}
+
+static struct amba_id pl010_ids[] __initdata = {
+ {
+ .id = 0x00041010,
+ .mask = 0x000fffff,
+ },
+ { 0, 0 },
+};
+
+static struct amba_driver pl010_driver = {
+ .drv = {
+ .name = "uart-pl010",
+ },
+ .id_table = pl010_ids,
+ .probe = pl010_probe,
+ .remove = pl010_remove,
+ .suspend = pl010_suspend,
+ .resume = pl010_resume,
+};
+
+static int __init pl010_init(void)
+{
+ int ret;
+
+ printk(KERN_INFO "Serial: AMBA driver $Revision: 1.41 $\n");
+
+ ret = uart_register_driver(&amba_reg);
+ if (ret == 0) {
+ ret = amba_driver_register(&pl010_driver);
+ if (ret)
+ uart_unregister_driver(&amba_reg);
+ }
+ return ret;
+}
+
+static void __exit pl010_exit(void)
+{
+ amba_driver_unregister(&pl010_driver);
+ uart_unregister_driver(&amba_reg);
+}
+
+module_init(pl010_init);
+module_exit(pl010_exit);
+
+MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd");
+MODULE_DESCRIPTION("ARM AMBA serial port driver $Revision: 1.41 $");
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
new file mode 100644
index 00000000000..ff658a830f3
--- /dev/null
+++ b/drivers/serial/amba-pl011.c
@@ -0,0 +1,869 @@
+/*
+ * linux/drivers/char/amba.c
+ *
+ * Driver for AMBA serial ports
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ * Copyright 1999 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * $Id: amba.c,v 1.41 2002/07/28 10:03:27 rmk Exp $
+ *
+ * This is a generic driver for ARM AMBA-type serial ports. They
+ * have a lot of 16550-like features, but are not register compatible.
+ * Note that although they do have CTS, DCD and DSR inputs, they do
+ * not have an RI input, nor do they have DTR or RTS outputs. If
+ * required, these have to be supplied via some other means (eg, GPIO)
+ * and hooked into this driver.
+ */
+#include <linux/config.h>
+
+#if defined(CONFIG_SERIAL_AMBA_PL011_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/hardware/amba.h>
+#include <asm/hardware/clock.h>
+#include <asm/hardware/amba_serial.h>
+
+#define UART_NR 14
+
+#define SERIAL_AMBA_MAJOR 204
+#define SERIAL_AMBA_MINOR 64
+#define SERIAL_AMBA_NR UART_NR
+
+#define AMBA_ISR_PASS_LIMIT 256
+
+#define UART_DUMMY_RSR_RX 256
+
+/*
+ * We wrap our port structure around the generic uart_port.
+ */
+struct uart_amba_port {
+ struct uart_port port;
+ struct clk *clk;
+ unsigned int im; /* interrupt mask */
+ unsigned int old_status;
+};
+
+static void pl011_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+
+ uap->im &= ~UART011_TXIM;
+ writew(uap->im, uap->port.membase + UART011_IMSC);
+}
+
+static void pl011_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+
+ uap->im |= UART011_TXIM;
+ writew(uap->im, uap->port.membase + UART011_IMSC);
+}
+
+static void pl011_stop_rx(struct uart_port *port)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+
+ uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM|
+ UART011_PEIM|UART011_BEIM|UART011_OEIM);
+ writew(uap->im, uap->port.membase + UART011_IMSC);
+}
+
+static void pl011_enable_ms(struct uart_port *port)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+
+ uap->im |= UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM;
+ writew(uap->im, uap->port.membase + UART011_IMSC);
+}
+
+static void
+#ifdef SUPPORT_SYSRQ
+pl011_rx_chars(struct uart_amba_port *uap, struct pt_regs *regs)
+#else
+pl011_rx_chars(struct uart_amba_port *uap)
+#endif
+{
+ struct tty_struct *tty = uap->port.info->tty;
+ unsigned int status, ch, flag, rsr, max_count = 256;
+
+ status = readw(uap->port.membase + UART01x_FR);
+ while ((status & UART01x_FR_RXFE) == 0 && max_count--) {
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
+ if (tty->low_latency)
+ tty_flip_buffer_push(tty);
+ /*
+ * If this failed then we will throw away the
+ * bytes but must do so to clear interrupts
+ */
+ }
+
+ ch = readw(uap->port.membase + UART01x_DR);
+ flag = TTY_NORMAL;
+ uap->port.icount.rx++;
+
+ /*
+ * Note that the error handling code is
+ * out of the main execution path
+ */
+ rsr = readw(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
+ if (rsr & UART01x_RSR_ANY) {
+ if (rsr & UART01x_RSR_BE) {
+ rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
+ uap->port.icount.brk++;
+ if (uart_handle_break(&uap->port))
+ goto ignore_char;
+ } else if (rsr & UART01x_RSR_PE)
+ uap->port.icount.parity++;
+ else if (rsr & UART01x_RSR_FE)
+ uap->port.icount.frame++;
+ if (rsr & UART01x_RSR_OE)
+ uap->port.icount.overrun++;
+
+ rsr &= uap->port.read_status_mask;
+
+ if (rsr & UART01x_RSR_BE)
+ flag = TTY_BREAK;
+ else if (rsr & UART01x_RSR_PE)
+ flag = TTY_PARITY;
+ else if (rsr & UART01x_RSR_FE)
+ flag = TTY_FRAME;
+ }
+
+ if (uart_handle_sysrq_char(&uap->port, ch, regs))
+ goto ignore_char;
+
+ if ((rsr & uap->port.ignore_status_mask) == 0) {
+ tty_insert_flip_char(tty, ch, flag);
+ }
+ if ((rsr & UART01x_RSR_OE) &&
+ tty->flip.count < TTY_FLIPBUF_SIZE) {
+ /*
+ * Overrun is special, since it's reported
+ * immediately, and doesn't affect the current
+ * character
+ */
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ }
+ ignore_char:
+ status = readw(uap->port.membase + UART01x_FR);
+ }
+ tty_flip_buffer_push(tty);
+ return;
+}
+
+static void pl011_tx_chars(struct uart_amba_port *uap)
+{
+ struct circ_buf *xmit = &uap->port.info->xmit;
+ int count;
+
+ if (uap->port.x_char) {
+ writew(uap->port.x_char, uap->port.membase + UART01x_DR);
+ uap->port.icount.tx++;
+ uap->port.x_char = 0;
+ return;
+ }
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) {
+ pl011_stop_tx(&uap->port, 0);
+ return;
+ }
+
+ count = uap->port.fifosize >> 1;
+ do {
+ writew(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ uap->port.icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ } while (--count > 0);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&uap->port);
+
+ if (uart_circ_empty(xmit))
+ pl011_stop_tx(&uap->port, 0);
+}
+
+static void pl011_modem_status(struct uart_amba_port *uap)
+{
+ unsigned int status, delta;
+
+ status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
+
+ delta = status ^ uap->old_status;
+ uap->old_status = status;
+
+ if (!delta)
+ return;
+
+ if (delta & UART01x_FR_DCD)
+ uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD);
+
+ if (delta & UART01x_FR_DSR)
+ uap->port.icount.dsr++;
+
+ if (delta & UART01x_FR_CTS)
+ uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS);
+
+ wake_up_interruptible(&uap->port.info->delta_msr_wait);
+}
+
+static irqreturn_t pl011_int(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct uart_amba_port *uap = dev_id;
+ unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT;
+ int handled = 0;
+
+ spin_lock(&uap->port.lock);
+
+ status = readw(uap->port.membase + UART011_MIS);
+ if (status) {
+ do {
+ writew(status & ~(UART011_TXIS|UART011_RTIS|
+ UART011_RXIS),
+ uap->port.membase + UART011_ICR);
+
+ if (status & (UART011_RTIS|UART011_RXIS))
+#ifdef SUPPORT_SYSRQ
+ pl011_rx_chars(uap, regs);
+#else
+ pl011_rx_chars(uap);
+#endif
+ if (status & (UART011_DSRMIS|UART011_DCDMIS|
+ UART011_CTSMIS|UART011_RIMIS))
+ pl011_modem_status(uap);
+ if (status & UART011_TXIS)
+ pl011_tx_chars(uap);
+
+ if (pass_counter-- == 0)
+ break;
+
+ status = readw(uap->port.membase + UART011_MIS);
+ } while (status != 0);
+ handled = 1;
+ }
+
+ spin_unlock(&uap->port.lock);
+
+ return IRQ_RETVAL(handled);
+}
+
+static unsigned int pl01x_tx_empty(struct uart_port *port)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+ unsigned int status = readw(uap->port.membase + UART01x_FR);
+ return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT;
+}
+
+static unsigned int pl01x_get_mctrl(struct uart_port *port)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+ unsigned int result = 0;
+ unsigned int status = readw(uap->port.membase + UART01x_FR);
+
+#define BIT(uartbit, tiocmbit) \
+ if (status & uartbit) \
+ result |= tiocmbit
+
+ BIT(UART01x_FR_DCD, TIOCM_CAR);
+ BIT(UART01x_FR_DSR, TIOCM_DSR);
+ BIT(UART01x_FR_CTS, TIOCM_CTS);
+ BIT(UART011_FR_RI, TIOCM_RNG);
+#undef BIT
+ return result;
+}
+
+static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+ unsigned int cr;
+
+ cr = readw(uap->port.membase + UART011_CR);
+
+#define BIT(tiocmbit, uartbit) \
+ if (mctrl & tiocmbit) \
+ cr |= uartbit; \
+ else \
+ cr &= ~uartbit
+
+ BIT(TIOCM_RTS, UART011_CR_RTS);
+ BIT(TIOCM_DTR, UART011_CR_DTR);
+ BIT(TIOCM_OUT1, UART011_CR_OUT1);
+ BIT(TIOCM_OUT2, UART011_CR_OUT2);
+ BIT(TIOCM_LOOP, UART011_CR_LBE);
+#undef BIT
+
+ writew(cr, uap->port.membase + UART011_CR);
+}
+
+static void pl011_break_ctl(struct uart_port *port, int break_state)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+ unsigned long flags;
+ unsigned int lcr_h;
+
+ spin_lock_irqsave(&uap->port.lock, flags);
+ lcr_h = readw(uap->port.membase + UART011_LCRH);
+ if (break_state == -1)
+ lcr_h |= UART01x_LCRH_BRK;
+ else
+ lcr_h &= ~UART01x_LCRH_BRK;
+ writew(lcr_h, uap->port.membase + UART011_LCRH);
+ spin_unlock_irqrestore(&uap->port.lock, flags);
+}
+
+static int pl011_startup(struct uart_port *port)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+ unsigned int cr;
+ int retval;
+
+ /*
+ * Try to enable the clock producer.
+ */
+ retval = clk_enable(uap->clk);
+ if (retval)
+ goto out;
+
+ uap->port.uartclk = clk_get_rate(uap->clk);
+
+ /*
+ * Allocate the IRQ
+ */
+ retval = request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap);
+ if (retval)
+ goto clk_dis;
+
+ writew(UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
+ uap->port.membase + UART011_IFLS);
+
+ /*
+ * Provoke TX FIFO interrupt into asserting.
+ */
+ cr = UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_LBE;
+ writew(cr, uap->port.membase + UART011_CR);
+ writew(0, uap->port.membase + UART011_FBRD);
+ writew(1, uap->port.membase + UART011_IBRD);
+ writew(0, uap->port.membase + UART011_LCRH);
+ writew(0, uap->port.membase + UART01x_DR);
+ while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY)
+ barrier();
+
+ cr = UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
+ writew(cr, uap->port.membase + UART011_CR);
+
+ /*
+ * initialise the old status of the modem signals
+ */
+ uap->old_status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
+
+ /*
+ * Finally, enable interrupts
+ */
+ spin_lock_irq(&uap->port.lock);
+ uap->im = UART011_RXIM | UART011_RTIM;
+ writew(uap->im, uap->port.membase + UART011_IMSC);
+ spin_unlock_irq(&uap->port.lock);
+
+ return 0;
+
+ clk_dis:
+ clk_disable(uap->clk);
+ out:
+ return retval;
+}
+
+static void pl011_shutdown(struct uart_port *port)
+{
+ struct uart_amba_port *uap = (struct uart_amba_port *)port;
+ unsigned long val;
+
+ /*
+ * disable all interrupts
+ */
+ spin_lock_irq(&uap->port.lock);
+ uap->im = 0;
+ writew(uap->im, uap->port.membase + UART011_IMSC);
+ writew(0xffff, uap->port.membase + UART011_ICR);
+ spin_unlock_irq(&uap->port.lock);
+
+ /*
+ * Free the interrupt
+ */
+ free_irq(uap->port.irq, uap);
+
+ /*
+ * disable the port
+ */
+ writew(UART01x_CR_UARTEN | UART011_CR_TXE, uap->port.membase + UART011_CR);
+
+ /*
+ * disable break condition and fifos
+ */
+ val = readw(uap->port.membase + UART011_LCRH);
+ val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
+ writew(val, uap->port.membase + UART011_LCRH);
+
+ /*
+ * Shut down the clock producer
+ */
+ clk_disable(uap->clk);
+}
+
+static void
+pl011_set_termios(struct uart_port *port, struct termios *termios,
+ struct termios *old)
+{
+ unsigned int lcr_h, old_cr;
+ unsigned long flags;
+ unsigned int baud, quot;
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ quot = port->uartclk * 4 / baud;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ lcr_h = UART01x_LCRH_WLEN_5;
+ break;
+ case CS6:
+ lcr_h = UART01x_LCRH_WLEN_6;
+ break;
+ case CS7:
+ lcr_h = UART01x_LCRH_WLEN_7;
+ break;
+ default: // CS8
+ lcr_h = UART01x_LCRH_WLEN_8;
+ break;
+ }
+ if (termios->c_cflag & CSTOPB)
+ lcr_h |= UART01x_LCRH_STP2;
+ if (termios->c_cflag & PARENB) {
+ lcr_h |= UART01x_LCRH_PEN;
+ if (!(termios->c_cflag & PARODD))
+ lcr_h |= UART01x_LCRH_EPS;
+ }
+ if (port->fifosize > 1)
+ lcr_h |= UART01x_LCRH_FEN;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ port->read_status_mask = UART01x_RSR_OE;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= UART01x_RSR_BE;
+
+ /*
+ * Characters to ignore
+ */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE;
+ if (termios->c_iflag & IGNBRK) {
+ port->ignore_status_mask |= UART01x_RSR_BE;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= UART01x_RSR_OE;
+ }
+
+ /*
+ * Ignore all characters if CREAD is not set.
+ */
+ if ((termios->c_cflag & CREAD) == 0)
+ port->ignore_status_mask |= UART_DUMMY_RSR_RX;
+
+ if (UART_ENABLE_MS(port, termios->c_cflag))
+ pl011_enable_ms(port);
+
+ /* first, disable everything */
+ old_cr = readw(port->membase + UART011_CR);
+ writew(0, port->membase + UART011_CR);
+
+ /* Set baud rate */
+ writew(quot & 0x3f, port->membase + UART011_FBRD);
+ writew(quot >> 6, port->membase + UART011_IBRD);
+
+ /*
+ * ----------v----------v----------v----------v-----
+ * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
+ * ----------^----------^----------^----------^-----
+ */
+ writew(lcr_h, port->membase + UART011_LCRH);
+ writew(old_cr, port->membase + UART011_CR);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *pl011_type(struct uart_port *port)
+{
+ return port->type == PORT_AMBA ? "AMBA/PL011" : NULL;
+}
+
+/*
+ * Release the memory region(s) being used by 'port'
+ */
+static void pl010_release_port(struct uart_port *port)
+{
+ release_mem_region(port->mapbase, SZ_4K);
+}
+
+/*
+ * Request the memory region(s) being used by 'port'
+ */
+static int pl010_request_port(struct uart_port *port)
+{
+ return request_mem_region(port->mapbase, SZ_4K, "uart-pl011")
+ != NULL ? 0 : -EBUSY;
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void pl010_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE) {
+ port->type = PORT_AMBA;
+ pl010_request_port(port);
+ }
+}
+
+/*
+ * verify the new serial_struct (for TIOCSSERIAL).
+ */
+static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ int ret = 0;
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA)
+ ret = -EINVAL;
+ if (ser->irq < 0 || ser->irq >= NR_IRQS)
+ ret = -EINVAL;
+ if (ser->baud_base < 9600)
+ ret = -EINVAL;
+ return ret;
+}
+
+static struct uart_ops amba_pl011_pops = {
+ .tx_empty = pl01x_tx_empty,
+ .set_mctrl = pl011_set_mctrl,
+ .get_mctrl = pl01x_get_mctrl,
+ .stop_tx = pl011_stop_tx,
+ .start_tx = pl011_start_tx,
+ .stop_rx = pl011_stop_rx,
+ .enable_ms = pl011_enable_ms,
+ .break_ctl = pl011_break_ctl,
+ .startup = pl011_startup,
+ .shutdown = pl011_shutdown,
+ .set_termios = pl011_set_termios,
+ .type = pl011_type,
+ .release_port = pl010_release_port,
+ .request_port = pl010_request_port,
+ .config_port = pl010_config_port,
+ .verify_port = pl010_verify_port,
+};
+
+static struct uart_amba_port *amba_ports[UART_NR];
+
+#ifdef CONFIG_SERIAL_AMBA_PL011_CONSOLE
+
+static inline void
+pl011_console_write_char(struct uart_amba_port *uap, char ch)
+{
+ unsigned int status;
+
+ do {
+ status = readw(uap->port.membase + UART01x_FR);
+ } while (status & UART01x_FR_TXFF);
+ writew(ch, uap->port.membase + UART01x_DR);
+}
+
+static void
+pl011_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct uart_amba_port *uap = amba_ports[co->index];
+ unsigned int status, old_cr, new_cr;
+ int i;
+
+ clk_enable(uap->clk);
+
+ /*
+ * First save the CR then disable the interrupts
+ */
+ old_cr = readw(uap->port.membase + UART011_CR);
+ new_cr = old_cr & ~UART011_CR_CTSEN;
+ new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
+ writew(new_cr, uap->port.membase + UART011_CR);
+
+ /*
+ * Now, do each character
+ */
+ for (i = 0; i < count; i++) {
+ pl011_console_write_char(uap, s[i]);
+ if (s[i] == '\n')
+ pl011_console_write_char(uap, '\r');
+ }
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the TCR
+ */
+ do {
+ status = readw(uap->port.membase + UART01x_FR);
+ } while (status & UART01x_FR_BUSY);
+ writew(old_cr, uap->port.membase + UART011_CR);
+
+ clk_disable(uap->clk);
+}
+
+static void __init
+pl011_console_get_options(struct uart_amba_port *uap, int *baud,
+ int *parity, int *bits)
+{
+ if (readw(uap->port.membase + UART011_CR) & UART01x_CR_UARTEN) {
+ unsigned int lcr_h, ibrd, fbrd;
+
+ lcr_h = readw(uap->port.membase + UART011_LCRH);
+
+ *parity = 'n';
+ if (lcr_h & UART01x_LCRH_PEN) {
+ if (lcr_h & UART01x_LCRH_EPS)
+ *parity = 'e';
+ else
+ *parity = 'o';
+ }
+
+ if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7)
+ *bits = 7;
+ else
+ *bits = 8;
+
+ ibrd = readw(uap->port.membase + UART011_IBRD);
+ fbrd = readw(uap->port.membase + UART011_FBRD);
+
+ *baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd);
+ }
+}
+
+static int __init pl011_console_setup(struct console *co, char *options)
+{
+ struct uart_amba_port *uap;
+ int baud = 38400;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ if (co->index >= UART_NR)
+ co->index = 0;
+ uap = amba_ports[co->index];
+
+ uap->port.uartclk = clk_get_rate(uap->clk);
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ else
+ pl011_console_get_options(uap, &baud, &parity, &bits);
+
+ return uart_set_options(&uap->port, co, baud, parity, bits, flow);
+}
+
+extern struct uart_driver amba_reg;
+static struct console amba_console = {
+ .name = "ttyAMA",
+ .write = pl011_console_write,
+ .device = uart_console_device,
+ .setup = pl011_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &amba_reg,
+};
+
+#define AMBA_CONSOLE (&amba_console)
+#else
+#define AMBA_CONSOLE NULL
+#endif
+
+static struct uart_driver amba_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "ttyAMA",
+ .dev_name = "ttyAMA",
+ .major = SERIAL_AMBA_MAJOR,
+ .minor = SERIAL_AMBA_MINOR,
+ .nr = UART_NR,
+ .cons = AMBA_CONSOLE,
+};
+
+static int pl011_probe(struct amba_device *dev, void *id)
+{
+ struct uart_amba_port *uap;
+ void __iomem *base;
+ int i, ret;
+
+ for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
+ if (amba_ports[i] == NULL)
+ break;
+
+ if (i == ARRAY_SIZE(amba_ports)) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ uap = kmalloc(sizeof(struct uart_amba_port), GFP_KERNEL);
+ if (uap == NULL) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ base = ioremap(dev->res.start, PAGE_SIZE);
+ if (!base) {
+ ret = -ENOMEM;
+ goto free;
+ }
+
+ memset(uap, 0, sizeof(struct uart_amba_port));
+ uap->clk = clk_get(&dev->dev, "UARTCLK");
+ if (IS_ERR(uap->clk)) {
+ ret = PTR_ERR(uap->clk);
+ goto unmap;
+ }
+
+ ret = clk_use(uap->clk);
+ if (ret)
+ goto putclk;
+
+ uap->port.dev = &dev->dev;
+ uap->port.mapbase = dev->res.start;
+ uap->port.membase = base;
+ uap->port.iotype = UPIO_MEM;
+ uap->port.irq = dev->irq[0];
+ uap->port.fifosize = 16;
+ uap->port.ops = &amba_pl011_pops;
+ uap->port.flags = UPF_BOOT_AUTOCONF;
+ uap->port.line = i;
+
+ amba_ports[i] = uap;
+
+ amba_set_drvdata(dev, uap);
+ ret = uart_add_one_port(&amba_reg, &uap->port);
+ if (ret) {
+ amba_set_drvdata(dev, NULL);
+ amba_ports[i] = NULL;
+ clk_unuse(uap->clk);
+ putclk:
+ clk_put(uap->clk);
+ unmap:
+ iounmap(base);
+ free:
+ kfree(uap);
+ }
+ out:
+ return ret;
+}
+
+static int pl011_remove(struct amba_device *dev)
+{
+ struct uart_amba_port *uap = amba_get_drvdata(dev);
+ int i;
+
+ amba_set_drvdata(dev, NULL);
+
+ uart_remove_one_port(&amba_reg, &uap->port);
+
+ for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
+ if (amba_ports[i] == uap)
+ amba_ports[i] = NULL;
+
+ iounmap(uap->port.membase);
+ clk_unuse(uap->clk);
+ clk_put(uap->clk);
+ kfree(uap);
+ return 0;
+}
+
+static struct amba_id pl011_ids[] __initdata = {
+ {
+ .id = 0x00041011,
+ .mask = 0x000fffff,
+ },
+ { 0, 0 },
+};
+
+static struct amba_driver pl011_driver = {
+ .drv = {
+ .name = "uart-pl011",
+ },
+ .id_table = pl011_ids,
+ .probe = pl011_probe,
+ .remove = pl011_remove,
+};
+
+static int __init pl011_init(void)
+{
+ int ret;
+ printk(KERN_INFO "Serial: AMBA PL011 UART driver\n");
+
+ ret = uart_register_driver(&amba_reg);
+ if (ret == 0) {
+ ret = amba_driver_register(&pl011_driver);
+ if (ret)
+ uart_unregister_driver(&amba_reg);
+ }
+ return ret;
+}
+
+static void __exit pl011_exit(void)
+{
+ amba_driver_unregister(&pl011_driver);
+ uart_unregister_driver(&amba_reg);
+}
+
+module_init(pl011_init);
+module_exit(pl011_exit);
+
+MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd");
+MODULE_DESCRIPTION("ARM AMBA serial port driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/au1x00_uart.c b/drivers/serial/au1x00_uart.c
new file mode 100644
index 00000000000..b6d3d503494
--- /dev/null
+++ b/drivers/serial/au1x00_uart.c
@@ -0,0 +1,1312 @@
+/*
+ * Driver for 8250/16550-type serial ports
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ * Copyright (C) 2001 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * A note about mapbase / membase
+ *
+ * mapbase is the physical address of the IO port. Currently, we don't
+ * support this very well, and it may well be dropped from this driver
+ * in future. As such, mapbase should be NULL.
+ *
+ * membase is an 'ioremapped' cookie. This is compatible with the old
+ * serial.c driver, and is currently the preferred form.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/serial.h>
+#include <linux/serialP.h>
+#include <linux/delay.h>
+
+#include <asm/serial.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-au1x00/au1000.h>
+
+#if defined(CONFIG_SERIAL_AU1X00_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/serial_core.h>
+#include "8250.h"
+
+/*
+ * Debugging.
+ */
+#if 0
+#define DEBUG_AUTOCONF(fmt...) printk(fmt)
+#else
+#define DEBUG_AUTOCONF(fmt...) do { } while (0)
+#endif
+
+#if 0
+#define DEBUG_INTR(fmt...) printk(fmt)
+#else
+#define DEBUG_INTR(fmt...) do { } while (0)
+#endif
+
+#define PASS_LIMIT 256
+
+/*
+ * We default to IRQ0 for the "no irq" hack. Some
+ * machine types want others as well - they're free
+ * to redefine this in their header file.
+ */
+#define is_real_interrupt(irq) ((irq) != 0)
+
+static struct old_serial_port old_serial_port[] = {
+ { .baud_base = 0,
+ .iomem_base = (u8 *)UART0_ADDR,
+ .irq = AU1000_UART0_INT,
+ .flags = STD_COM_FLAGS,
+ .iomem_reg_shift = 2,
+ }, {
+ .baud_base = 0,
+ .iomem_base = (u8 *)UART1_ADDR,
+ .irq = AU1000_UART1_INT,
+ .flags = STD_COM_FLAGS,
+ .iomem_reg_shift = 2
+ }, {
+ .baud_base = 0,
+ .iomem_base = (u8 *)UART2_ADDR,
+ .irq = AU1000_UART2_INT,
+ .flags = STD_COM_FLAGS,
+ .iomem_reg_shift = 2
+ }, {
+ .baud_base = 0,
+ .iomem_base = (u8 *)UART3_ADDR,
+ .irq = AU1000_UART3_INT,
+ .flags = STD_COM_FLAGS,
+ .iomem_reg_shift = 2
+ }
+};
+
+#define UART_NR ARRAY_SIZE(old_serial_port)
+
+struct uart_8250_port {
+ struct uart_port port;
+ struct timer_list timer; /* "no irq" timer */
+ struct list_head list; /* ports on this IRQ */
+ unsigned short rev;
+ unsigned char acr;
+ unsigned char ier;
+ unsigned char lcr;
+ unsigned char mcr_mask; /* mask of user bits */
+ unsigned char mcr_force; /* mask of forced bits */
+ unsigned char lsr_break_flag;
+
+ /*
+ * We provide a per-port pm hook.
+ */
+ void (*pm)(struct uart_port *port,
+ unsigned int state, unsigned int old);
+};
+
+struct irq_info {
+ spinlock_t lock;
+ struct list_head *head;
+};
+
+static struct irq_info irq_lists[NR_IRQS];
+
+/*
+ * Here we define the default xmit fifo size used for each type of UART.
+ */
+static const struct serial_uart_config uart_config[PORT_MAX_8250+1] = {
+ { "unknown", 1, 0 },
+ { "8250", 1, 0 },
+ { "16450", 1, 0 },
+ { "16550", 1, 0 },
+ /* PORT_16550A */
+ { "AU1X00_UART",16, UART_CLEAR_FIFO | UART_USE_FIFO },
+};
+
+static _INLINE_ unsigned int serial_in(struct uart_8250_port *up, int offset)
+{
+ return au_readl((unsigned long)up->port.membase + offset);
+}
+
+static _INLINE_ void
+serial_out(struct uart_8250_port *up, int offset, int value)
+{
+ au_writel(value, (unsigned long)up->port.membase + offset);
+}
+
+#define serial_inp(up, offset) serial_in(up, offset)
+#define serial_outp(up, offset, value) serial_out(up, offset, value)
+
+/*
+ * This routine is called by rs_init() to initialize a specific serial
+ * port. It determines what type of UART chip this serial port is
+ * using: 8250, 16450, 16550, 16550A. The important question is
+ * whether or not this UART is a 16550A or not, since this will
+ * determine whether or not we can use its FIFO features or not.
+ */
+static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
+{
+ unsigned char save_lcr, save_mcr;
+ unsigned long flags;
+
+ if (!up->port.iobase && !up->port.mapbase && !up->port.membase)
+ return;
+
+ DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04x, 0x%08lx): ",
+ up->port.line, up->port.iobase, up->port.membase);
+
+ /*
+ * We really do need global IRQs disabled here - we're going to
+ * be frobbing the chips IRQ enable register to see if it exists.
+ */
+ spin_lock_irqsave(&up->port.lock, flags);
+// save_flags(flags); cli();
+
+ save_mcr = serial_in(up, UART_MCR);
+ save_lcr = serial_in(up, UART_LCR);
+
+ up->port.type = PORT_16550A;
+ serial_outp(up, UART_LCR, save_lcr);
+
+ up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size;
+
+ if (up->port.type == PORT_UNKNOWN)
+ goto out;
+
+ /*
+ * Reset the UART.
+ */
+ serial_outp(up, UART_MCR, save_mcr);
+ serial_outp(up, UART_FCR, (UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR |
+ UART_FCR_CLEAR_XMIT));
+ serial_outp(up, UART_FCR, 0);
+ (void)serial_in(up, UART_RX);
+ serial_outp(up, UART_IER, 0);
+
+ out:
+ spin_unlock_irqrestore(&up->port.lock, flags);
+// restore_flags(flags);
+ DEBUG_AUTOCONF("type=%s\n", uart_config[up->port.type].name);
+}
+
+static void serial8250_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+
+ if (up->ier & UART_IER_THRI) {
+ up->ier &= ~UART_IER_THRI;
+ serial_out(up, UART_IER, up->ier);
+ }
+}
+
+static void serial8250_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+
+ if (!(up->ier & UART_IER_THRI)) {
+ up->ier |= UART_IER_THRI;
+ serial_out(up, UART_IER, up->ier);
+ }
+}
+
+static void serial8250_stop_rx(struct uart_port *port)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+
+ up->ier &= ~UART_IER_RLSI;
+ up->port.read_status_mask &= ~UART_LSR_DR;
+ serial_out(up, UART_IER, up->ier);
+}
+
+static void serial8250_enable_ms(struct uart_port *port)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+
+ up->ier |= UART_IER_MSI;
+ serial_out(up, UART_IER, up->ier);
+}
+
+static _INLINE_ void
+receive_chars(struct uart_8250_port *up, int *status, struct pt_regs *regs)
+{
+ struct tty_struct *tty = up->port.info->tty;
+ unsigned char ch;
+ int max_count = 256;
+
+ do {
+ if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
+ tty->flip.work.func((void *)tty);
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+ return; // if TTY_DONT_FLIP is set
+ }
+ ch = serial_inp(up, UART_RX);
+ *tty->flip.char_buf_ptr = ch;
+ *tty->flip.flag_buf_ptr = TTY_NORMAL;
+ up->port.icount.rx++;
+
+ if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
+ UART_LSR_FE | UART_LSR_OE))) {
+ /*
+ * For statistics only
+ */
+ if (*status & UART_LSR_BI) {
+ *status &= ~(UART_LSR_FE | UART_LSR_PE);
+ up->port.icount.brk++;
+ /*
+ * We do the SysRQ and SAK checking
+ * here because otherwise the break
+ * may get masked by ignore_status_mask
+ * or read_status_mask.
+ */
+ if (uart_handle_break(&up->port))
+ goto ignore_char;
+ } else if (*status & UART_LSR_PE)
+ up->port.icount.parity++;
+ else if (*status & UART_LSR_FE)
+ up->port.icount.frame++;
+ if (*status & UART_LSR_OE)
+ up->port.icount.overrun++;
+
+ /*
+ * Mask off conditions which should be ingored.
+ */
+ *status &= up->port.read_status_mask;
+
+#ifdef CONFIG_SERIAL_AU1X00_CONSOLE
+ if (up->port.line == up->port.cons->index) {
+ /* Recover the break flag from console xmit */
+ *status |= up->lsr_break_flag;
+ up->lsr_break_flag = 0;
+ }
+#endif
+ if (*status & UART_LSR_BI) {
+ DEBUG_INTR("handling break....");
+ *tty->flip.flag_buf_ptr = TTY_BREAK;
+ } else if (*status & UART_LSR_PE)
+ *tty->flip.flag_buf_ptr = TTY_PARITY;
+ else if (*status & UART_LSR_FE)
+ *tty->flip.flag_buf_ptr = TTY_FRAME;
+ }
+ if (uart_handle_sysrq_char(&up->port, ch, regs))
+ goto ignore_char;
+ if ((*status & up->port.ignore_status_mask) == 0) {
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ tty->flip.count++;
+ }
+ if ((*status & UART_LSR_OE) &&
+ tty->flip.count < TTY_FLIPBUF_SIZE) {
+ /*
+ * Overrun is special, since it's reported
+ * immediately, and doesn't affect the current
+ * character.
+ */
+ *tty->flip.flag_buf_ptr = TTY_OVERRUN;
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ tty->flip.count++;
+ }
+ ignore_char:
+ *status = serial_inp(up, UART_LSR);
+ } while ((*status & UART_LSR_DR) && (max_count-- > 0));
+ spin_unlock(&up->port.lock);
+ tty_flip_buffer_push(tty);
+ spin_lock(&up->port.lock);
+}
+
+static _INLINE_ void transmit_chars(struct uart_8250_port *up)
+{
+ struct circ_buf *xmit = &up->port.info->xmit;
+ int count;
+
+ if (up->port.x_char) {
+ serial_outp(up, UART_TX, up->port.x_char);
+ up->port.icount.tx++;
+ up->port.x_char = 0;
+ return;
+ }
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
+ serial8250_stop_tx(&up->port, 0);
+ return;
+ }
+
+ count = up->port.fifosize;
+ do {
+ serial_out(up, UART_TX, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ up->port.icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ } while (--count > 0);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+
+ DEBUG_INTR("THRE...");
+
+ if (uart_circ_empty(xmit))
+ serial8250_stop_tx(&up->port, 0);
+}
+
+static _INLINE_ void check_modem_status(struct uart_8250_port *up)
+{
+ int status;
+
+ status = serial_in(up, UART_MSR);
+
+ if ((status & UART_MSR_ANY_DELTA) == 0)
+ return;
+
+ if (status & UART_MSR_TERI)
+ up->port.icount.rng++;
+ if (status & UART_MSR_DDSR)
+ up->port.icount.dsr++;
+ if (status & UART_MSR_DDCD)
+ uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
+ if (status & UART_MSR_DCTS)
+ uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
+
+ wake_up_interruptible(&up->port.info->delta_msr_wait);
+}
+
+/*
+ * This handles the interrupt from one port.
+ */
+static inline void
+serial8250_handle_port(struct uart_8250_port *up, struct pt_regs *regs)
+{
+ unsigned int status = serial_inp(up, UART_LSR);
+
+ DEBUG_INTR("status = %x...", status);
+
+ if (status & UART_LSR_DR)
+ receive_chars(up, &status, regs);
+ check_modem_status(up);
+ if (status & UART_LSR_THRE)
+ transmit_chars(up);
+}
+
+/*
+ * This is the serial driver's interrupt routine.
+ *
+ * Arjan thinks the old way was overly complex, so it got simplified.
+ * Alan disagrees, saying that need the complexity to handle the weird
+ * nature of ISA shared interrupts. (This is a special exception.)
+ *
+ * In order to handle ISA shared interrupts properly, we need to check
+ * that all ports have been serviced, and therefore the ISA interrupt
+ * line has been de-asserted.
+ *
+ * This means we need to loop through all ports. checking that they
+ * don't have an interrupt pending.
+ */
+static irqreturn_t serial8250_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct irq_info *i = dev_id;
+ struct list_head *l, *end = NULL;
+ int pass_counter = 0;
+
+ DEBUG_INTR("serial8250_interrupt(%d)...", irq);
+
+ spin_lock(&i->lock);
+
+ l = i->head;
+ do {
+ struct uart_8250_port *up;
+ unsigned int iir;
+
+ up = list_entry(l, struct uart_8250_port, list);
+
+ iir = serial_in(up, UART_IIR);
+ if (!(iir & UART_IIR_NO_INT)) {
+ spin_lock(&up->port.lock);
+ serial8250_handle_port(up, regs);
+ spin_unlock(&up->port.lock);
+
+ end = NULL;
+ } else if (end == NULL)
+ end = l;
+
+ l = l->next;
+
+ if (l == i->head && pass_counter++ > PASS_LIMIT) {
+ /* If we hit this, we're dead. */
+ printk(KERN_ERR "serial8250: too much work for "
+ "irq%d\n", irq);
+ break;
+ }
+ } while (l != end);
+
+ spin_unlock(&i->lock);
+
+ DEBUG_INTR("end.\n");
+ /* FIXME! Was it really ours? */
+ return IRQ_HANDLED;
+}
+
+/*
+ * To support ISA shared interrupts, we need to have one interrupt
+ * handler that ensures that the IRQ line has been deasserted
+ * before returning. Failing to do this will result in the IRQ
+ * line being stuck active, and, since ISA irqs are edge triggered,
+ * no more IRQs will be seen.
+ */
+static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up)
+{
+ spin_lock_irq(&i->lock);
+
+ if (!list_empty(i->head)) {
+ if (i->head == &up->list)
+ i->head = i->head->next;
+ list_del(&up->list);
+ } else {
+ BUG_ON(i->head != &up->list);
+ i->head = NULL;
+ }
+
+ spin_unlock_irq(&i->lock);
+}
+
+static int serial_link_irq_chain(struct uart_8250_port *up)
+{
+ struct irq_info *i = irq_lists + up->port.irq;
+ int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? SA_SHIRQ : 0;
+
+ spin_lock_irq(&i->lock);
+
+ if (i->head) {
+ list_add(&up->list, i->head);
+ spin_unlock_irq(&i->lock);
+
+ ret = 0;
+ } else {
+ INIT_LIST_HEAD(&up->list);
+ i->head = &up->list;
+ spin_unlock_irq(&i->lock);
+
+ ret = request_irq(up->port.irq, serial8250_interrupt,
+ irq_flags, "serial", i);
+ if (ret < 0)
+ serial_do_unlink(i, up);
+ }
+
+ return ret;
+}
+
+static void serial_unlink_irq_chain(struct uart_8250_port *up)
+{
+ struct irq_info *i = irq_lists + up->port.irq;
+
+ BUG_ON(i->head == NULL);
+
+ if (list_empty(i->head))
+ free_irq(up->port.irq, i);
+
+ serial_do_unlink(i, up);
+}
+
+/*
+ * This function is used to handle ports that do not have an
+ * interrupt. This doesn't work very well for 16450's, but gives
+ * barely passable results for a 16550A. (Although at the expense
+ * of much CPU overhead).
+ */
+static void serial8250_timeout(unsigned long data)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)data;
+ unsigned int timeout;
+ unsigned int iir;
+
+ iir = serial_in(up, UART_IIR);
+ if (!(iir & UART_IIR_NO_INT)) {
+ spin_lock(&up->port.lock);
+ serial8250_handle_port(up, NULL);
+ spin_unlock(&up->port.lock);
+ }
+
+ timeout = up->port.timeout;
+ timeout = timeout > 6 ? (timeout / 2 - 2) : 1;
+ mod_timer(&up->timer, jiffies + timeout);
+}
+
+static unsigned int serial8250_tx_empty(struct uart_port *port)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+ unsigned long flags;
+ unsigned int ret;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return ret;
+}
+
+static unsigned int serial8250_get_mctrl(struct uart_port *port)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+ unsigned long flags;
+ unsigned char status;
+ unsigned int ret;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ status = serial_in(up, UART_MSR);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ ret = 0;
+ if (status & UART_MSR_DCD)
+ ret |= TIOCM_CAR;
+ if (status & UART_MSR_RI)
+ ret |= TIOCM_RNG;
+ if (status & UART_MSR_DSR)
+ ret |= TIOCM_DSR;
+ if (status & UART_MSR_CTS)
+ ret |= TIOCM_CTS;
+ return ret;
+}
+
+static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+ unsigned char mcr = 0;
+
+ if (mctrl & TIOCM_RTS)
+ mcr |= UART_MCR_RTS;
+ if (mctrl & TIOCM_DTR)
+ mcr |= UART_MCR_DTR;
+ if (mctrl & TIOCM_OUT1)
+ mcr |= UART_MCR_OUT1;
+ if (mctrl & TIOCM_OUT2)
+ mcr |= UART_MCR_OUT2;
+ if (mctrl & TIOCM_LOOP)
+ mcr |= UART_MCR_LOOP;
+
+ mcr = (mcr & up->mcr_mask) | up->mcr_force;
+
+ serial_out(up, UART_MCR, mcr);
+}
+
+static void serial8250_break_ctl(struct uart_port *port, int break_state)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ if (break_state == -1)
+ up->lcr |= UART_LCR_SBC;
+ else
+ up->lcr &= ~UART_LCR_SBC;
+ serial_out(up, UART_LCR, up->lcr);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static int serial8250_startup(struct uart_port *port)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+ unsigned long flags;
+ int retval;
+
+ /*
+ * Clear the FIFO buffers and disable them.
+ * (they will be reeanbled in set_termios())
+ */
+ if (uart_config[up->port.type].flags & UART_CLEAR_FIFO) {
+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+ serial_outp(up, UART_FCR, 0);
+ }
+
+ /*
+ * Clear the interrupt registers.
+ */
+ (void) serial_inp(up, UART_LSR);
+ (void) serial_inp(up, UART_RX);
+ (void) serial_inp(up, UART_IIR);
+ (void) serial_inp(up, UART_MSR);
+
+ /*
+ * At this point, there's no way the LSR could still be 0xff;
+ * if it is, then bail out, because there's likely no UART
+ * here.
+ */
+ if (!(up->port.flags & UPF_BUGGY_UART) &&
+ (serial_inp(up, UART_LSR) == 0xff)) {
+ printk("ttyS%d: LSR safety check engaged!\n", up->port.line);
+ return -ENODEV;
+ }
+
+ retval = serial_link_irq_chain(up);
+ if (retval)
+ return retval;
+
+ /*
+ * Now, initialize the UART
+ */
+ serial_outp(up, UART_LCR, UART_LCR_WLEN8);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ if (up->port.flags & UPF_FOURPORT) {
+ if (!is_real_interrupt(up->port.irq))
+ up->port.mctrl |= TIOCM_OUT1;
+ } else
+ /*
+ * Most PC uarts need OUT2 raised to enable interrupts.
+ */
+ if (is_real_interrupt(up->port.irq))
+ up->port.mctrl |= TIOCM_OUT2;
+
+ serial8250_set_mctrl(&up->port, up->port.mctrl);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /*
+ * Finally, enable interrupts. Note: Modem status interrupts
+ * are set via set_termios(), which will be occurring imminently
+ * anyway, so we don't enable them here.
+ */
+ up->ier = UART_IER_RLSI | UART_IER_RDI;
+ serial_outp(up, UART_IER, up->ier);
+
+ if (up->port.flags & UPF_FOURPORT) {
+ unsigned int icp;
+ /*
+ * Enable interrupts on the AST Fourport board
+ */
+ icp = (up->port.iobase & 0xfe0) | 0x01f;
+ outb_p(0x80, icp);
+ (void) inb_p(icp);
+ }
+
+ /*
+ * And clear the interrupt registers again for luck.
+ */
+ (void) serial_inp(up, UART_LSR);
+ (void) serial_inp(up, UART_RX);
+ (void) serial_inp(up, UART_IIR);
+ (void) serial_inp(up, UART_MSR);
+
+ return 0;
+}
+
+static void serial8250_shutdown(struct uart_port *port)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+ unsigned long flags;
+
+ /*
+ * Disable interrupts from this port
+ */
+ up->ier = 0;
+ serial_outp(up, UART_IER, 0);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ if (up->port.flags & UPF_FOURPORT) {
+ /* reset interrupts on the AST Fourport board */
+ inb((up->port.iobase & 0xfe0) | 0x1f);
+ up->port.mctrl |= TIOCM_OUT1;
+ } else
+ up->port.mctrl &= ~TIOCM_OUT2;
+
+ serial8250_set_mctrl(&up->port, up->port.mctrl);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /*
+ * Disable break condition and FIFOs
+ */
+ serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC);
+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR |
+ UART_FCR_CLEAR_XMIT);
+ serial_outp(up, UART_FCR, 0);
+
+ /*
+ * Read data port to reset things, and then unlink from
+ * the IRQ chain.
+ */
+ (void) serial_in(up, UART_RX);
+
+ if (!is_real_interrupt(up->port.irq))
+ del_timer_sync(&up->timer);
+ else
+ serial_unlink_irq_chain(up);
+}
+
+static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud)
+{
+ unsigned int quot;
+
+ /*
+ * Handle magic divisors for baud rates above baud_base on
+ * SMSC SuperIO chips.
+ */
+ if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
+ baud == (port->uartclk/4))
+ quot = 0x8001;
+ else if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
+ baud == (port->uartclk/8))
+ quot = 0x8002;
+ else
+ quot = uart_get_divisor(port, baud);
+
+ return quot;
+}
+
+static void
+serial8250_set_termios(struct uart_port *port, struct termios *termios,
+ struct termios *old)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+ unsigned char cval, fcr = 0;
+ unsigned long flags;
+ unsigned int baud, quot;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ cval = 0x00;
+ break;
+ case CS6:
+ cval = 0x01;
+ break;
+ case CS7:
+ cval = 0x02;
+ break;
+ default:
+ case CS8:
+ cval = 0x03;
+ break;
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ cval |= 0x04;
+ if (termios->c_cflag & PARENB)
+ cval |= UART_LCR_PARITY;
+ if (!(termios->c_cflag & PARODD))
+ cval |= UART_LCR_EPAR;
+#ifdef CMSPAR
+ if (termios->c_cflag & CMSPAR)
+ cval |= UART_LCR_SPAR;
+#endif
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ quot = serial8250_get_divisor(port, baud);
+ quot = 0x35; /* FIXME */
+
+ /*
+ * Work around a bug in the Oxford Semiconductor 952 rev B
+ * chip which causes it to seriously miscalculate baud rates
+ * when DLL is 0.
+ */
+ if ((quot & 0xff) == 0 && up->port.type == PORT_16C950 &&
+ up->rev == 0x5201)
+ quot ++;
+
+ if (uart_config[up->port.type].flags & UART_USE_FIFO) {
+ if (baud < 2400)
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIGGER_1;
+ else
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIGGER_8;
+ }
+
+ /*
+ * Ok, we're now changing the port state. Do it with
+ * interrupts disabled.
+ */
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
+ if (termios->c_iflag & INPCK)
+ up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ up->port.read_status_mask |= UART_LSR_BI;
+
+ /*
+ * Characteres to ignore
+ */
+ up->port.ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
+ if (termios->c_iflag & IGNBRK) {
+ up->port.ignore_status_mask |= UART_LSR_BI;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_OE;
+ }
+
+ /*
+ * ignore all characters if CREAD is not set
+ */
+ if ((termios->c_cflag & CREAD) == 0)
+ up->port.ignore_status_mask |= UART_LSR_DR;
+
+ /*
+ * CTS flow control flag and modem status interrupts
+ */
+ up->ier &= ~UART_IER_MSI;
+ if (UART_ENABLE_MS(&up->port, termios->c_cflag))
+ up->ier |= UART_IER_MSI;
+
+ serial_out(up, UART_IER, up->ier);
+ serial_outp(up, 0x28, quot & 0xffff);
+ up->lcr = cval; /* Save LCR */
+ if (up->port.type != PORT_16750) {
+ if (fcr & UART_FCR_ENABLE_FIFO) {
+ /* emulated UARTs (Lucent Venus 167x) need two steps */
+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+ }
+ serial_outp(up, UART_FCR, fcr); /* set fcr */
+ }
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void
+serial8250_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+ if (state) {
+ /* sleep */
+ if (up->pm)
+ up->pm(port, state, oldstate);
+ } else {
+ /* wake */
+ if (up->pm)
+ up->pm(port, state, oldstate);
+ }
+}
+
+/*
+ * Resource handling. This is complicated by the fact that resources
+ * depend on the port type. Maybe we should be claiming the standard
+ * 8250 ports, and then trying to get other resources as necessary?
+ */
+static int
+serial8250_request_std_resource(struct uart_8250_port *up, struct resource **res)
+{
+ unsigned int size = 8 << up->port.regshift;
+ int ret = 0;
+
+ switch (up->port.iotype) {
+ case SERIAL_IO_MEM:
+ if (up->port.mapbase) {
+ *res = request_mem_region(up->port.mapbase, size, "serial");
+ if (!*res)
+ ret = -EBUSY;
+ }
+ break;
+
+ case SERIAL_IO_HUB6:
+ case SERIAL_IO_PORT:
+ *res = request_region(up->port.iobase, size, "serial");
+ if (!*res)
+ ret = -EBUSY;
+ break;
+ }
+ return ret;
+}
+
+
+static void serial8250_release_port(struct uart_port *port)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+ unsigned long start, offset = 0, size = 0;
+
+ size <<= up->port.regshift;
+
+ switch (up->port.iotype) {
+ case SERIAL_IO_MEM:
+ if (up->port.mapbase) {
+ /*
+ * Unmap the area.
+ */
+ iounmap(up->port.membase);
+ up->port.membase = NULL;
+
+ start = up->port.mapbase;
+
+ if (size)
+ release_mem_region(start + offset, size);
+ release_mem_region(start, 8 << up->port.regshift);
+ }
+ break;
+
+ case SERIAL_IO_HUB6:
+ case SERIAL_IO_PORT:
+ start = up->port.iobase;
+
+ if (size)
+ release_region(start + offset, size);
+ release_region(start + offset, 8 << up->port.regshift);
+ break;
+
+ default:
+ break;
+ }
+}
+
+static int serial8250_request_port(struct uart_port *port)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct resource *res = NULL, *res_rsa = NULL;
+ int ret = 0;
+
+ ret = serial8250_request_std_resource(up, &res);
+
+ /*
+ * If we have a mapbase, then request that as well.
+ */
+ if (ret == 0 && up->port.flags & UPF_IOREMAP) {
+ int size = res->end - res->start + 1;
+
+ up->port.membase = ioremap(up->port.mapbase, size);
+ if (!up->port.membase)
+ ret = -ENOMEM;
+ }
+
+ if (ret < 0) {
+ if (res_rsa)
+ release_resource(res_rsa);
+ if (res)
+ release_resource(res);
+ }
+ return ret;
+}
+
+static void serial8250_config_port(struct uart_port *port, int flags)
+{
+ struct uart_8250_port *up = (struct uart_8250_port *)port;
+ struct resource *res_std = NULL, *res_rsa = NULL;
+ int probeflags = PROBE_ANY;
+
+ probeflags &= ~PROBE_RSA;
+
+ if (flags & UART_CONFIG_TYPE)
+ autoconfig(up, probeflags);
+
+ /*
+ * If the port wasn't an RSA port, release the resource.
+ */
+ if (up->port.type != PORT_RSA && res_rsa)
+ release_resource(res_rsa);
+
+ if (up->port.type == PORT_UNKNOWN && res_std)
+ release_resource(res_std);
+}
+
+static int
+serial8250_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ if (ser->irq >= NR_IRQS || ser->irq < 0 ||
+ ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
+ ser->type > PORT_MAX_8250 || ser->type == PORT_CIRRUS ||
+ ser->type == PORT_STARTECH)
+ return -EINVAL;
+ return 0;
+}
+
+static const char *
+serial8250_type(struct uart_port *port)
+{
+ int type = port->type;
+
+ if (type >= ARRAY_SIZE(uart_config))
+ type = 0;
+ return uart_config[type].name;
+}
+
+static struct uart_ops serial8250_pops = {
+ .tx_empty = serial8250_tx_empty,
+ .set_mctrl = serial8250_set_mctrl,
+ .get_mctrl = serial8250_get_mctrl,
+ .stop_tx = serial8250_stop_tx,
+ .start_tx = serial8250_start_tx,
+ .stop_rx = serial8250_stop_rx,
+ .enable_ms = serial8250_enable_ms,
+ .break_ctl = serial8250_break_ctl,
+ .startup = serial8250_startup,
+ .shutdown = serial8250_shutdown,
+ .set_termios = serial8250_set_termios,
+ .pm = serial8250_pm,
+ .type = serial8250_type,
+ .release_port = serial8250_release_port,
+ .request_port = serial8250_request_port,
+ .config_port = serial8250_config_port,
+ .verify_port = serial8250_verify_port,
+};
+
+static struct uart_8250_port serial8250_ports[UART_NR];
+
+static void __init serial8250_isa_init_ports(void)
+{
+ struct uart_8250_port *up;
+ static int first = 1;
+ int i;
+
+ if (!first)
+ return;
+ first = 0;
+
+ for (i = 0, up = serial8250_ports; i < ARRAY_SIZE(old_serial_port);
+ i++, up++) {
+ up->port.iobase = old_serial_port[i].port;
+ up->port.irq = old_serial_port[i].irq;
+ up->port.uartclk = get_au1x00_uart_baud_base();
+ up->port.flags = old_serial_port[i].flags;
+ up->port.hub6 = old_serial_port[i].hub6;
+ up->port.membase = old_serial_port[i].iomem_base;
+ up->port.iotype = old_serial_port[i].io_type;
+ up->port.regshift = old_serial_port[i].iomem_reg_shift;
+ up->port.ops = &serial8250_pops;
+ }
+}
+
+static void __init serial8250_register_ports(struct uart_driver *drv)
+{
+ int i;
+
+ serial8250_isa_init_ports();
+
+ for (i = 0; i < UART_NR; i++) {
+ struct uart_8250_port *up = &serial8250_ports[i];
+
+ up->port.line = i;
+ up->port.ops = &serial8250_pops;
+ init_timer(&up->timer);
+ up->timer.function = serial8250_timeout;
+
+ /*
+ * ALPHA_KLUDGE_MCR needs to be killed.
+ */
+ up->mcr_mask = ~ALPHA_KLUDGE_MCR;
+ up->mcr_force = ALPHA_KLUDGE_MCR;
+
+ uart_add_one_port(drv, &up->port);
+ }
+}
+
+#ifdef CONFIG_SERIAL_AU1X00_CONSOLE
+
+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+
+/*
+ * Wait for transmitter & holding register to empty
+ */
+static inline void wait_for_xmitr(struct uart_8250_port *up)
+{
+ unsigned int status, tmout = 10000;
+
+ /* Wait up to 10ms for the character(s) to be sent. */
+ do {
+ status = serial_in(up, UART_LSR);
+
+ if (status & UART_LSR_BI)
+ up->lsr_break_flag = UART_LSR_BI;
+
+ if (--tmout == 0)
+ break;
+ udelay(1);
+ } while ((status & BOTH_EMPTY) != BOTH_EMPTY);
+
+ /* Wait up to 1s for flow control if necessary */
+ if (up->port.flags & UPF_CONS_FLOW) {
+ tmout = 1000000;
+ while (--tmout &&
+ ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
+ udelay(1);
+ }
+}
+
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ *
+ * The console_lock must be held when we get here.
+ */
+static void
+serial8250_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct uart_8250_port *up = &serial8250_ports[co->index];
+ unsigned int ier;
+ int i;
+
+ /*
+ * First save the UER then disable the interrupts
+ */
+ ier = serial_in(up, UART_IER);
+ serial_out(up, UART_IER, 0);
+
+ /*
+ * Now, do each character
+ */
+ for (i = 0; i < count; i++, s++) {
+ wait_for_xmitr(up);
+
+ /*
+ * Send the character out.
+ * If a LF, also do CR...
+ */
+ serial_out(up, UART_TX, *s);
+ if (*s == 10) {
+ wait_for_xmitr(up);
+ serial_out(up, UART_TX, 13);
+ }
+ }
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the IER
+ */
+ wait_for_xmitr(up);
+ serial_out(up, UART_IER, ier);
+}
+
+static int __init serial8250_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ if (co->index >= UART_NR)
+ co->index = 0;
+ port = &serial8250_ports[co->index].port;
+
+ /*
+ * Temporary fix.
+ */
+ spin_lock_init(&port->lock);
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+extern struct uart_driver serial8250_reg;
+static struct console serial8250_console = {
+ .name = "ttyS",
+ .write = serial8250_console_write,
+ .device = uart_console_device,
+ .setup = serial8250_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &serial8250_reg,
+};
+
+static int __init serial8250_console_init(void)
+{
+ serial8250_isa_init_ports();
+ register_console(&serial8250_console);
+ return 0;
+}
+console_initcall(serial8250_console_init);
+
+#define SERIAL8250_CONSOLE &serial8250_console
+#else
+#define SERIAL8250_CONSOLE NULL
+#endif
+
+static struct uart_driver serial8250_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "serial",
+ .devfs_name = "tts/",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+ .minor = 64,
+ .nr = UART_NR,
+ .cons = SERIAL8250_CONSOLE,
+};
+
+int __init early_serial_setup(struct uart_port *port)
+{
+ serial8250_isa_init_ports();
+ serial8250_ports[port->line].port = *port;
+ serial8250_ports[port->line].port.ops = &serial8250_pops;
+ return 0;
+}
+
+/**
+ * serial8250_suspend_port - suspend one serial port
+ * @line: serial line number
+ * @level: the level of port suspension, as per uart_suspend_port
+ *
+ * Suspend one serial port.
+ */
+void serial8250_suspend_port(int line)
+{
+ uart_suspend_port(&serial8250_reg, &serial8250_ports[line].port);
+}
+
+/**
+ * serial8250_resume_port - resume one serial port
+ * @line: serial line number
+ * @level: the level of port resumption, as per uart_resume_port
+ *
+ * Resume one serial port.
+ */
+void serial8250_resume_port(int line)
+{
+ uart_resume_port(&serial8250_reg, &serial8250_ports[line].port);
+}
+
+static int __init serial8250_init(void)
+{
+ int ret, i;
+
+ printk(KERN_INFO "Serial: Au1x00 driver\n");
+
+ for (i = 0; i < NR_IRQS; i++)
+ spin_lock_init(&irq_lists[i].lock);
+
+ ret = uart_register_driver(&serial8250_reg);
+ if (ret >= 0)
+ serial8250_register_ports(&serial8250_reg);
+
+ return ret;
+}
+
+static void __exit serial8250_exit(void)
+{
+ int i;
+
+ for (i = 0; i < UART_NR; i++)
+ uart_remove_one_port(&serial8250_reg, &serial8250_ports[i].port);
+
+ uart_unregister_driver(&serial8250_reg);
+}
+
+module_init(serial8250_init);
+module_exit(serial8250_exit);
+
+EXPORT_SYMBOL(serial8250_suspend_port);
+EXPORT_SYMBOL(serial8250_resume_port);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Au1x00 serial driver\n");
diff --git a/drivers/serial/bast_sio.c b/drivers/serial/bast_sio.c
new file mode 100644
index 00000000000..2b48fab6f0c
--- /dev/null
+++ b/drivers/serial/bast_sio.c
@@ -0,0 +1,80 @@
+/* linux/drivers/serial/bast_sio.c
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://www.simtec.co.uk/products/EB2410ITX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ * 23-Sep-2004 BJD Added copyright header
+ * 23-Sep-2004 BJD Added serial port remove code
+*/
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/types.h>
+
+#include <asm/io.h>
+#include <asm/serial.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/map.h>
+#include <asm/arch/irqs.h>
+#include <asm/arch/bast-map.h>
+#include <asm/arch/bast-irq.h>
+
+static int __init serial_bast_register(unsigned long port, unsigned int irq)
+{
+ struct serial_struct serial_req;
+
+ serial_req.flags = UPF_AUTOPROBE | UPF_SHARE_IRQ;
+ serial_req.baud_base = BASE_BAUD;
+ serial_req.irq = irq;
+ serial_req.io_type = UPIO_MEM;
+ serial_req.iomap_base = port;
+ serial_req.iomem_base = ioremap(port, 0x10);
+ serial_req.iomem_reg_shift = 0;
+
+ return register_serial(&serial_req);
+}
+
+#define SERIAL_BASE (S3C2410_CS2 + BAST_PA_SUPERIO)
+
+static int port[2] = { -1, -1 };
+
+static int __init serial_bast_init(void)
+{
+ if (machine_is_bast()) {
+ port[0] = serial_bast_register(SERIAL_BASE + 0x2f8, IRQ_PCSERIAL1);
+ port[1] = serial_bast_register(SERIAL_BASE + 0x3f8, IRQ_PCSERIAL2);
+ }
+
+ return 0;
+}
+
+static void __exit serial_bast_exit(void)
+{
+ if (port[0] != -1)
+ unregister_serial(port[0]);
+ if (port[1] != -1)
+ unregister_serial(port[1]);
+}
+
+
+module_init(serial_bast_init);
+module_exit(serial_bast_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ben Dooks, ben@simtec.co.uk");
+MODULE_DESCRIPTION("BAST Onboard Serial setup");
+
+
diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
new file mode 100644
index 00000000000..16592fae47f
--- /dev/null
+++ b/drivers/serial/clps711x.c
@@ -0,0 +1,609 @@
+/*
+ * linux/drivers/char/clps711x.c
+ *
+ * Driver for CLPS711x serial ports
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ * Copyright 1999 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * $Id: clps711x.c,v 1.42 2002/07/28 10:03:28 rmk Exp $
+ *
+ */
+#include <linux/config.h>
+
+#if defined(CONFIG_SERIAL_CLPS711X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/hardware/clps7111.h>
+
+#define UART_NR 2
+
+#define SERIAL_CLPS711X_MAJOR 204
+#define SERIAL_CLPS711X_MINOR 40
+#define SERIAL_CLPS711X_NR UART_NR
+
+/*
+ * We use the relevant SYSCON register as a base address for these ports.
+ */
+#define UBRLCR(port) ((port)->iobase + UBRLCR1 - SYSCON1)
+#define UARTDR(port) ((port)->iobase + UARTDR1 - SYSCON1)
+#define SYSFLG(port) ((port)->iobase + SYSFLG1 - SYSCON1)
+#define SYSCON(port) ((port)->iobase + SYSCON1 - SYSCON1)
+
+#define TX_IRQ(port) ((port)->irq)
+#define RX_IRQ(port) ((port)->irq + 1)
+
+#define UART_ANY_ERR (UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR)
+
+#define tx_enabled(port) ((port)->unused[0])
+
+static void
+clps711xuart_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ if (tx_enabled(port)) {
+ disable_irq(TX_IRQ(port));
+ tx_enabled(port) = 0;
+ }
+}
+
+static void
+clps711xuart_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+ if (!tx_enabled(port)) {
+ enable_irq(TX_IRQ(port));
+ tx_enabled(port) = 1;
+ }
+}
+
+static void clps711xuart_stop_rx(struct uart_port *port)
+{
+ disable_irq(RX_IRQ(port));
+}
+
+static void clps711xuart_enable_ms(struct uart_port *port)
+{
+}
+
+static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct uart_port *port = dev_id;
+ struct tty_struct *tty = port->info->tty;
+ unsigned int status, ch, flg, ignored = 0;
+
+ status = clps_readl(SYSFLG(port));
+ while (!(status & SYSFLG_URXFE)) {
+ ch = clps_readl(UARTDR(port));
+
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+ goto ignore_char;
+ port->icount.rx++;
+
+ flg = TTY_NORMAL;
+
+ /*
+ * Note that the error handling code is
+ * out of the main execution path
+ */
+ if (ch & UART_ANY_ERR)
+ goto handle_error;
+
+ if (uart_handle_sysrq_char(port, ch, regs))
+ goto ignore_char;
+
+ error_return:
+ tty_insert_flip_char(tty, ch, flg);
+ ignore_char:
+ status = clps_readl(SYSFLG(port));
+ }
+ out:
+ tty_flip_buffer_push(tty);
+ return IRQ_HANDLED;
+
+ handle_error:
+ if (ch & UARTDR_PARERR)
+ port->icount.parity++;
+ else if (ch & UARTDR_FRMERR)
+ port->icount.frame++;
+ if (ch & UARTDR_OVERR)
+ port->icount.overrun++;
+
+ if (ch & port->ignore_status_mask) {
+ if (++ignored > 100)
+ goto out;
+ goto ignore_char;
+ }
+ ch &= port->read_status_mask;
+
+ if (ch & UARTDR_PARERR)
+ flg = TTY_PARITY;
+ else if (ch & UARTDR_FRMERR)
+ flg = TTY_FRAME;
+
+ if (ch & UARTDR_OVERR) {
+ /*
+ * CHECK: does overrun affect the current character?
+ * ASSUMPTION: it does not.
+ */
+ tty_insert_flip_char(tty, ch, flg);
+ ch = 0;
+ flg = TTY_OVERRUN;
+ }
+#ifdef SUPPORT_SYSRQ
+ port->sysrq = 0;
+#endif
+ goto error_return;
+}
+
+static irqreturn_t clps711xuart_int_tx(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct uart_port *port = dev_id;
+ struct circ_buf *xmit = &port->info->xmit;
+ int count;
+
+ if (port->x_char) {
+ clps_writel(port->x_char, UARTDR(port));
+ port->icount.tx++;
+ port->x_char = 0;
+ return IRQ_HANDLED;
+ }
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ clps711xuart_stop_tx(port, 0);
+ return IRQ_HANDLED;
+ }
+
+ count = port->fifosize >> 1;
+ do {
+ clps_writel(xmit->buf[xmit->tail], UARTDR(port));
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ } while (--count > 0);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit))
+ clps711xuart_stop_tx(port, 0);
+
+ return IRQ_HANDLED;
+}
+
+static unsigned int clps711xuart_tx_empty(struct uart_port *port)
+{
+ unsigned int status = clps_readl(SYSFLG(port));
+ return status & SYSFLG_UBUSY ? 0 : TIOCSER_TEMT;
+}
+
+static unsigned int clps711xuart_get_mctrl(struct uart_port *port)
+{
+ unsigned int port_addr;
+ unsigned int result = 0;
+ unsigned int status;
+
+ port_addr = SYSFLG(port);
+ if (port_addr == SYSFLG1) {
+ status = clps_readl(SYSFLG1);
+ if (status & SYSFLG1_DCD)
+ result |= TIOCM_CAR;
+ if (status & SYSFLG1_DSR)
+ result |= TIOCM_DSR;
+ if (status & SYSFLG1_CTS)
+ result |= TIOCM_CTS;
+ }
+
+ return result;
+}
+
+static void
+clps711xuart_set_mctrl_null(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+static void clps711xuart_break_ctl(struct uart_port *port, int break_state)
+{
+ unsigned long flags;
+ unsigned int ubrlcr;
+
+ spin_lock_irqsave(&port->lock, flags);
+ ubrlcr = clps_readl(UBRLCR(port));
+ if (break_state == -1)
+ ubrlcr |= UBRLCR_BREAK;
+ else
+ ubrlcr &= ~UBRLCR_BREAK;
+ clps_writel(ubrlcr, UBRLCR(port));
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int clps711xuart_startup(struct uart_port *port)
+{
+ unsigned int syscon;
+ int retval;
+
+ tx_enabled(port) = 1;
+
+ /*
+ * Allocate the IRQs
+ */
+ retval = request_irq(TX_IRQ(port), clps711xuart_int_tx, 0,
+ "clps711xuart_tx", port);
+ if (retval)
+ return retval;
+
+ retval = request_irq(RX_IRQ(port), clps711xuart_int_rx, 0,
+ "clps711xuart_rx", port);
+ if (retval) {
+ free_irq(TX_IRQ(port), port);
+ return retval;
+ }
+
+ /*
+ * enable the port
+ */
+ syscon = clps_readl(SYSCON(port));
+ syscon |= SYSCON_UARTEN;
+ clps_writel(syscon, SYSCON(port));
+
+ return 0;
+}
+
+static void clps711xuart_shutdown(struct uart_port *port)
+{
+ unsigned int ubrlcr, syscon;
+
+ /*
+ * Free the interrupt
+ */
+ free_irq(TX_IRQ(port), port); /* TX interrupt */
+ free_irq(RX_IRQ(port), port); /* RX interrupt */
+
+ /*
+ * disable the port
+ */
+ syscon = clps_readl(SYSCON(port));
+ syscon &= ~SYSCON_UARTEN;
+ clps_writel(syscon, SYSCON(port));
+
+ /*
+ * disable break condition and fifos
+ */
+ ubrlcr = clps_readl(UBRLCR(port));
+ ubrlcr &= ~(UBRLCR_FIFOEN | UBRLCR_BREAK);
+ clps_writel(ubrlcr, UBRLCR(port));
+}
+
+static void
+clps711xuart_set_termios(struct uart_port *port, struct termios *termios,
+ struct termios *old)
+{
+ unsigned int ubrlcr, baud, quot;
+ unsigned long flags;
+
+ /*
+ * We don't implement CREAD.
+ */
+ termios->c_cflag |= CREAD;
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ quot = uart_get_divisor(port, baud);
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ ubrlcr = UBRLCR_WRDLEN5;
+ break;
+ case CS6:
+ ubrlcr = UBRLCR_WRDLEN6;
+ break;
+ case CS7:
+ ubrlcr = UBRLCR_WRDLEN7;
+ break;
+ default: // CS8
+ ubrlcr = UBRLCR_WRDLEN8;
+ break;
+ }
+ if (termios->c_cflag & CSTOPB)
+ ubrlcr |= UBRLCR_XSTOP;
+ if (termios->c_cflag & PARENB) {
+ ubrlcr |= UBRLCR_PRTEN;
+ if (!(termios->c_cflag & PARODD))
+ ubrlcr |= UBRLCR_EVENPRT;
+ }
+ if (port->fifosize > 1)
+ ubrlcr |= UBRLCR_FIFOEN;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ port->read_status_mask = UARTDR_OVERR;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= UARTDR_PARERR | UARTDR_FRMERR;
+
+ /*
+ * Characters to ignore
+ */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= UARTDR_FRMERR | UARTDR_PARERR;
+ if (termios->c_iflag & IGNBRK) {
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns to (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= UARTDR_OVERR;
+ }
+
+ quot -= 1;
+
+ clps_writel(ubrlcr | quot, UBRLCR(port));
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *clps711xuart_type(struct uart_port *port)
+{
+ return port->type == PORT_CLPS711X ? "CLPS711x" : NULL;
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void clps711xuart_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE)
+ port->type = PORT_CLPS711X;
+}
+
+static void clps711xuart_release_port(struct uart_port *port)
+{
+}
+
+static int clps711xuart_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+static struct uart_ops clps711x_pops = {
+ .tx_empty = clps711xuart_tx_empty,
+ .set_mctrl = clps711xuart_set_mctrl_null,
+ .get_mctrl = clps711xuart_get_mctrl,
+ .stop_tx = clps711xuart_stop_tx,
+ .start_tx = clps711xuart_start_tx,
+ .stop_rx = clps711xuart_stop_rx,
+ .enable_ms = clps711xuart_enable_ms,
+ .break_ctl = clps711xuart_break_ctl,
+ .startup = clps711xuart_startup,
+ .shutdown = clps711xuart_shutdown,
+ .set_termios = clps711xuart_set_termios,
+ .type = clps711xuart_type,
+ .config_port = clps711xuart_config_port,
+ .release_port = clps711xuart_release_port,
+ .request_port = clps711xuart_request_port,
+};
+
+static struct uart_port clps711x_ports[UART_NR] = {
+ {
+ .iobase = SYSCON1,
+ .irq = IRQ_UTXINT1, /* IRQ_URXINT1, IRQ_UMSINT */
+ .uartclk = 3686400,
+ .fifosize = 16,
+ .ops = &clps711x_pops,
+ .line = 0,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ },
+ {
+ .iobase = SYSCON2,
+ .irq = IRQ_UTXINT2, /* IRQ_URXINT2 */
+ .uartclk = 3686400,
+ .fifosize = 16,
+ .ops = &clps711x_pops,
+ .line = 1,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ }
+};
+
+#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ *
+ * The console_lock must be held when we get here.
+ *
+ * Note that this is called with interrupts already disabled
+ */
+static void
+clps711xuart_console_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ struct uart_port *port = clps711x_ports + co->index;
+ unsigned int status, syscon;
+ int i;
+
+ /*
+ * Ensure that the port is enabled.
+ */
+ syscon = clps_readl(SYSCON(port));
+ clps_writel(syscon | SYSCON_UARTEN, SYSCON(port));
+
+ /*
+ * Now, do each character
+ */
+ for (i = 0; i < count; i++) {
+ do {
+ status = clps_readl(SYSFLG(port));
+ } while (status & SYSFLG_UTXFF);
+ clps_writel(s[i], UARTDR(port));
+ if (s[i] == '\n') {
+ do {
+ status = clps_readl(SYSFLG(port));
+ } while (status & SYSFLG_UTXFF);
+ clps_writel('\r', UARTDR(port));
+ }
+ }
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the uart state.
+ */
+ do {
+ status = clps_readl(SYSFLG(port));
+ } while (status & SYSFLG_UBUSY);
+
+ clps_writel(syscon, SYSCON(port));
+}
+
+static void __init
+clps711xuart_console_get_options(struct uart_port *port, int *baud,
+ int *parity, int *bits)
+{
+ if (clps_readl(SYSCON(port)) & SYSCON_UARTEN) {
+ unsigned int ubrlcr, quot;
+
+ ubrlcr = clps_readl(UBRLCR(port));
+
+ *parity = 'n';
+ if (ubrlcr & UBRLCR_PRTEN) {
+ if (ubrlcr & UBRLCR_EVENPRT)
+ *parity = 'e';
+ else
+ *parity = 'o';
+ }
+
+ if ((ubrlcr & UBRLCR_WRDLEN_MASK) == UBRLCR_WRDLEN7)
+ *bits = 7;
+ else
+ *bits = 8;
+
+ quot = ubrlcr & UBRLCR_BAUD_MASK;
+ *baud = port->uartclk / (16 * (quot + 1));
+ }
+}
+
+static int __init clps711xuart_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 38400;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ port = uart_get_console(clps711x_ports, UART_NR, co);
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ else
+ clps711xuart_console_get_options(port, &baud, &parity, &bits);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+extern struct uart_driver clps711x_reg;
+static struct console clps711x_console = {
+ .name = "ttyCL",
+ .write = clps711xuart_console_write,
+ .device = uart_console_device,
+ .setup = clps711xuart_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &clps711x_reg,
+};
+
+static int __init clps711xuart_console_init(void)
+{
+ register_console(&clps711x_console);
+ return 0;
+}
+console_initcall(clps711xuart_console_init);
+
+#define CLPS711X_CONSOLE &clps711x_console
+#else
+#define CLPS711X_CONSOLE NULL
+#endif
+
+static struct uart_driver clps711x_reg = {
+ .driver_name = "ttyCL",
+ .dev_name = "ttyCL",
+ .major = SERIAL_CLPS711X_MAJOR,
+ .minor = SERIAL_CLPS711X_MINOR,
+ .nr = UART_NR,
+
+ .cons = CLPS711X_CONSOLE,
+};
+
+static int __init clps711xuart_init(void)
+{
+ int ret, i;
+
+ printk(KERN_INFO "Serial: CLPS711x driver $Revision: 1.42 $\n");
+
+ ret = uart_register_driver(&clps711x_reg);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < UART_NR; i++)
+ uart_add_one_port(&clps711x_reg, &clps711x_ports[i]);
+
+ return 0;
+}
+
+static void __exit clps711xuart_exit(void)
+{
+ int i;
+
+ for (i = 0; i < UART_NR; i++)
+ uart_remove_one_port(&clps711x_reg, &clps711x_ports[i]);
+
+ uart_unregister_driver(&clps711x_reg);
+}
+
+module_init(clps711xuart_init);
+module_exit(clps711xuart_exit);
+
+MODULE_AUTHOR("Deep Blue Solutions Ltd");
+MODULE_DESCRIPTION("CLPS-711x generic serial driver $Revision: 1.42 $");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_CHARDEV(SERIAL_CLPS711X_MAJOR, SERIAL_CLPS711X_MINOR);
diff --git a/drivers/serial/cpm_uart/Makefile b/drivers/serial/cpm_uart/Makefile
new file mode 100644
index 00000000000..e072724ea75
--- /dev/null
+++ b/drivers/serial/cpm_uart/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the Motorola 8xx FEC ethernet controller
+#
+
+obj-$(CONFIG_SERIAL_CPM) += cpm_uart.o
+
+# Select the correct platform objects.
+cpm_uart-objs-$(CONFIG_CPM2) += cpm_uart_cpm2.o
+cpm_uart-objs-$(CONFIG_8xx) += cpm_uart_cpm1.o
+
+cpm_uart-objs := cpm_uart_core.o $(cpm_uart-objs-y)
diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h
new file mode 100644
index 00000000000..5f6187baad8
--- /dev/null
+++ b/drivers/serial/cpm_uart/cpm_uart.h
@@ -0,0 +1,89 @@
+/*
+ * linux/drivers/serial/cpm_uart.h
+ *
+ * Driver for CPM (SCC/SMC) serial ports
+ *
+ * Copyright (C) 2004 Freescale Semiconductor, Inc.
+ *
+ */
+#ifndef CPM_UART_H
+#define CPM_UART_H
+
+#include <linux/config.h>
+
+#if defined(CONFIG_CPM2)
+#include "cpm_uart_cpm2.h"
+#elif defined(CONFIG_8xx)
+#include "cpm_uart_cpm1.h"
+#endif
+
+#define SERIAL_CPM_MAJOR 204
+#define SERIAL_CPM_MINOR 46
+
+#define IS_SMC(pinfo) (pinfo->flags & FLAG_SMC)
+#define IS_DISCARDING(pinfo) (pinfo->flags & FLAG_DISCARDING)
+#define FLAG_DISCARDING 0x00000004 /* when set, don't discard */
+#define FLAG_SMC 0x00000002
+#define FLAG_CONSOLE 0x00000001
+
+#define UART_SMC1 0
+#define UART_SMC2 1
+#define UART_SCC1 2
+#define UART_SCC2 3
+#define UART_SCC3 4
+#define UART_SCC4 5
+
+#define UART_NR 6
+
+#define RX_NUM_FIFO 4
+#define RX_BUF_SIZE 32
+#define TX_NUM_FIFO 4
+#define TX_BUF_SIZE 32
+
+struct uart_cpm_port {
+ struct uart_port port;
+ u16 rx_nrfifos;
+ u16 rx_fifosize;
+ u16 tx_nrfifos;
+ u16 tx_fifosize;
+ smc_t *smcp;
+ smc_uart_t *smcup;
+ scc_t *sccp;
+ scc_uart_t *sccup;
+ volatile cbd_t *rx_bd_base;
+ volatile cbd_t *rx_cur;
+ volatile cbd_t *tx_bd_base;
+ volatile cbd_t *tx_cur;
+ unsigned char *tx_buf;
+ unsigned char *rx_buf;
+ u32 flags;
+ void (*set_lineif)(struct uart_cpm_port *);
+ u8 brg;
+ uint dp_addr;
+ void *mem_addr;
+ dma_addr_t dma_addr;
+ /* helpers */
+ int baud;
+ int bits;
+ /* Keep track of 'odd' SMC2 wirings */
+ int is_portb;
+};
+
+extern int cpm_uart_port_map[UART_NR];
+extern int cpm_uart_nr;
+extern struct uart_cpm_port cpm_uart_ports[UART_NR];
+
+/* these are located in their respective files */
+void cpm_line_cr_cmd(int line, int cmd);
+int cpm_uart_init_portdesc(void);
+int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con);
+void cpm_uart_freebuf(struct uart_cpm_port *pinfo);
+
+void smc1_lineif(struct uart_cpm_port *pinfo);
+void smc2_lineif(struct uart_cpm_port *pinfo);
+void scc1_lineif(struct uart_cpm_port *pinfo);
+void scc2_lineif(struct uart_cpm_port *pinfo);
+void scc3_lineif(struct uart_cpm_port *pinfo);
+void scc4_lineif(struct uart_cpm_port *pinfo);
+
+#endif /* CPM_UART_H */
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
new file mode 100644
index 00000000000..29db677d428
--- /dev/null
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -0,0 +1,1177 @@
+/*
+ * linux/drivers/serial/cpm_uart.c
+ *
+ * Driver for CPM (SCC/SMC) serial ports; core driver
+ *
+ * Based on arch/ppc/cpm2_io/uart.c by Dan Malek
+ * Based on ppc8xx.c by Thomas Gleixner
+ * Based on drivers/serial/amba.c by Russell King
+ *
+ * Maintainer: Kumar Gala (kumar.gala@freescale.com) (CPM2)
+ * Pantelis Antoniou (panto@intracom.gr) (CPM1)
+ *
+ * Copyright (C) 2004 Freescale Semiconductor, Inc.
+ * (C) 2004 Intracom, S.A.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/device.h>
+#include <linux/bootmem.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/delay.h>
+
+#if defined(CONFIG_SERIAL_CPM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/serial_core.h>
+#include <linux/kernel.h>
+
+#include "cpm_uart.h"
+
+/***********************************************************************/
+
+/* Track which ports are configured as uarts */
+int cpm_uart_port_map[UART_NR];
+/* How many ports did we config as uarts */
+int cpm_uart_nr;
+
+/**************************************************************/
+
+static int cpm_uart_tx_pump(struct uart_port *port);
+static void cpm_uart_init_smc(struct uart_cpm_port *pinfo);
+static void cpm_uart_init_scc(struct uart_cpm_port *pinfo);
+static void cpm_uart_initbd(struct uart_cpm_port *pinfo);
+
+/**************************************************************/
+
+/*
+ * Check, if transmit buffers are processed
+*/
+static unsigned int cpm_uart_tx_empty(struct uart_port *port)
+{
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+ volatile cbd_t *bdp = pinfo->tx_bd_base;
+ int ret = 0;
+
+ while (1) {
+ if (bdp->cbd_sc & BD_SC_READY)
+ break;
+
+ if (bdp->cbd_sc & BD_SC_WRAP) {
+ ret = TIOCSER_TEMT;
+ break;
+ }
+ bdp++;
+ }
+
+ pr_debug("CPM uart[%d]:tx_empty: %d\n", port->line, ret);
+
+ return ret;
+}
+
+static void cpm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ /* Whee. Do nothing. */
+}
+
+static unsigned int cpm_uart_get_mctrl(struct uart_port *port)
+{
+ /* Whee. Do nothing. */
+ return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+}
+
+/*
+ * Stop transmitter
+ */
+static void cpm_uart_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+ volatile smc_t *smcp = pinfo->smcp;
+ volatile scc_t *sccp = pinfo->sccp;
+
+ pr_debug("CPM uart[%d]:stop tx\n", port->line);
+
+ if (IS_SMC(pinfo))
+ smcp->smc_smcm &= ~SMCM_TX;
+ else
+ sccp->scc_sccm &= ~UART_SCCM_TX;
+}
+
+/*
+ * Start transmitter
+ */
+static void cpm_uart_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+ volatile smc_t *smcp = pinfo->smcp;
+ volatile scc_t *sccp = pinfo->sccp;
+
+ pr_debug("CPM uart[%d]:start tx\n", port->line);
+
+ if (IS_SMC(pinfo)) {
+ if (smcp->smc_smcm & SMCM_TX)
+ return;
+ } else {
+ if (sccp->scc_sccm & UART_SCCM_TX)
+ return;
+ }
+
+ if (cpm_uart_tx_pump(port) != 0) {
+ if (IS_SMC(pinfo))
+ smcp->smc_smcm |= SMCM_TX;
+ else
+ sccp->scc_sccm |= UART_SCCM_TX;
+ }
+}
+
+/*
+ * Stop receiver
+ */
+static void cpm_uart_stop_rx(struct uart_port *port)
+{
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+ volatile smc_t *smcp = pinfo->smcp;
+ volatile scc_t *sccp = pinfo->sccp;
+
+ pr_debug("CPM uart[%d]:stop rx\n", port->line);
+
+ if (IS_SMC(pinfo))
+ smcp->smc_smcm &= ~SMCM_RX;
+ else
+ sccp->scc_sccm &= ~UART_SCCM_RX;
+}
+
+/*
+ * Enable Modem status interrupts
+ */
+static void cpm_uart_enable_ms(struct uart_port *port)
+{
+ pr_debug("CPM uart[%d]:enable ms\n", port->line);
+}
+
+/*
+ * Generate a break.
+ */
+static void cpm_uart_break_ctl(struct uart_port *port, int break_state)
+{
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+ int line = pinfo - cpm_uart_ports;
+
+ pr_debug("CPM uart[%d]:break ctrl, break_state: %d\n", port->line,
+ break_state);
+
+ if (break_state)
+ cpm_line_cr_cmd(line, CPM_CR_STOP_TX);
+ else
+ cpm_line_cr_cmd(line, CPM_CR_RESTART_TX);
+}
+
+/*
+ * Transmit characters, refill buffer descriptor, if possible
+ */
+static void cpm_uart_int_tx(struct uart_port *port, struct pt_regs *regs)
+{
+ pr_debug("CPM uart[%d]:TX INT\n", port->line);
+
+ cpm_uart_tx_pump(port);
+}
+
+/*
+ * Receive characters
+ */
+static void cpm_uart_int_rx(struct uart_port *port, struct pt_regs *regs)
+{
+ int i;
+ unsigned char ch, *cp;
+ struct tty_struct *tty = port->info->tty;
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+ volatile cbd_t *bdp;
+ u16 status;
+ unsigned int flg;
+
+ pr_debug("CPM uart[%d]:RX INT\n", port->line);
+
+ /* Just loop through the closed BDs and copy the characters into
+ * the buffer.
+ */
+ bdp = pinfo->rx_cur;
+ for (;;) {
+ /* get status */
+ status = bdp->cbd_sc;
+ /* If this one is empty, return happy */
+ if (status & BD_SC_EMPTY)
+ break;
+
+ /* get number of characters, and check spce in flip-buffer */
+ i = bdp->cbd_datlen;
+
+ /* If we have not enough room in tty flip buffer, then we try
+ * later, which will be the next rx-interrupt or a timeout
+ */
+ if ((tty->flip.count + i) >= TTY_FLIPBUF_SIZE) {
+ tty->flip.work.func((void *)tty);
+ if ((tty->flip.count + i) >= TTY_FLIPBUF_SIZE) {
+ printk(KERN_WARNING "TTY_DONT_FLIP set\n");
+ return;
+ }
+ }
+
+ /* get pointer */
+ cp = (unsigned char *)bus_to_virt(bdp->cbd_bufaddr);
+
+ /* loop through the buffer */
+ while (i-- > 0) {
+ ch = *cp++;
+ port->icount.rx++;
+ flg = TTY_NORMAL;
+
+ if (status &
+ (BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV))
+ goto handle_error;
+ if (uart_handle_sysrq_char(port, ch, regs))
+ continue;
+
+ error_return:
+ *tty->flip.char_buf_ptr++ = ch;
+ *tty->flip.flag_buf_ptr++ = flg;
+ tty->flip.count++;
+
+ } /* End while (i--) */
+
+ /* This BD is ready to be used again. Clear status. get next */
+ bdp->cbd_sc &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV);
+ bdp->cbd_sc |= BD_SC_EMPTY;
+
+ if (bdp->cbd_sc & BD_SC_WRAP)
+ bdp = pinfo->rx_bd_base;
+ else
+ bdp++;
+ } /* End for (;;) */
+
+ /* Write back buffer pointer */
+ pinfo->rx_cur = (volatile cbd_t *) bdp;
+
+ /* activate BH processing */
+ tty_flip_buffer_push(tty);
+
+ return;
+
+ /* Error processing */
+
+ handle_error:
+ /* Statistics */
+ if (status & BD_SC_BR)
+ port->icount.brk++;
+ if (status & BD_SC_PR)
+ port->icount.parity++;
+ if (status & BD_SC_FR)
+ port->icount.frame++;
+ if (status & BD_SC_OV)
+ port->icount.overrun++;
+
+ /* Mask out ignored conditions */
+ status &= port->read_status_mask;
+
+ /* Handle the remaining ones */
+ if (status & BD_SC_BR)
+ flg = TTY_BREAK;
+ else if (status & BD_SC_PR)
+ flg = TTY_PARITY;
+ else if (status & BD_SC_FR)
+ flg = TTY_FRAME;
+
+ /* overrun does not affect the current character ! */
+ if (status & BD_SC_OV) {
+ ch = 0;
+ flg = TTY_OVERRUN;
+ /* We skip this buffer */
+ /* CHECK: Is really nothing senseful there */
+ /* ASSUMPTION: it contains nothing valid */
+ i = 0;
+ }
+#ifdef SUPPORT_SYSRQ
+ port->sysrq = 0;
+#endif
+ goto error_return;
+}
+
+/*
+ * Asynchron mode interrupt handler
+ */
+static irqreturn_t cpm_uart_int(int irq, void *data, struct pt_regs *regs)
+{
+ u8 events;
+ struct uart_port *port = (struct uart_port *)data;
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+ volatile smc_t *smcp = pinfo->smcp;
+ volatile scc_t *sccp = pinfo->sccp;
+
+ pr_debug("CPM uart[%d]:IRQ\n", port->line);
+
+ if (IS_SMC(pinfo)) {
+ events = smcp->smc_smce;
+ if (events & SMCM_BRKE)
+ uart_handle_break(port);
+ if (events & SMCM_RX)
+ cpm_uart_int_rx(port, regs);
+ if (events & SMCM_TX)
+ cpm_uart_int_tx(port, regs);
+ smcp->smc_smce = events;
+ } else {
+ events = sccp->scc_scce;
+ if (events & UART_SCCM_BRKE)
+ uart_handle_break(port);
+ if (events & UART_SCCM_RX)
+ cpm_uart_int_rx(port, regs);
+ if (events & UART_SCCM_TX)
+ cpm_uart_int_tx(port, regs);
+ sccp->scc_scce = events;
+ }
+ return (events) ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static int cpm_uart_startup(struct uart_port *port)
+{
+ int retval;
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+
+ pr_debug("CPM uart[%d]:startup\n", port->line);
+
+ /* Install interrupt handler. */
+ retval = request_irq(port->irq, cpm_uart_int, 0, "cpm_uart", port);
+ if (retval)
+ return retval;
+
+ /* Startup rx-int */
+ if (IS_SMC(pinfo)) {
+ pinfo->smcp->smc_smcm |= SMCM_RX;
+ pinfo->smcp->smc_smcmr |= SMCMR_REN;
+ } else {
+ pinfo->sccp->scc_sccm |= UART_SCCM_RX;
+ }
+
+ return 0;
+}
+
+/*
+ * Shutdown the uart
+ */
+static void cpm_uart_shutdown(struct uart_port *port)
+{
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+ int line = pinfo - cpm_uart_ports;
+
+ pr_debug("CPM uart[%d]:shutdown\n", port->line);
+
+ /* free interrupt handler */
+ free_irq(port->irq, port);
+
+ /* If the port is not the console, disable Rx and Tx. */
+ if (!(pinfo->flags & FLAG_CONSOLE)) {
+ /* Stop uarts */
+ if (IS_SMC(pinfo)) {
+ volatile smc_t *smcp = pinfo->smcp;
+ smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+ smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
+ } else {
+ volatile scc_t *sccp = pinfo->sccp;
+ sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+ sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX);
+ }
+
+ /* Shut them really down and reinit buffer descriptors */
+ cpm_line_cr_cmd(line, CPM_CR_STOP_TX);
+ cpm_uart_initbd(pinfo);
+ }
+}
+
+static void cpm_uart_set_termios(struct uart_port *port,
+ struct termios *termios, struct termios *old)
+{
+ int baud;
+ unsigned long flags;
+ u16 cval, scval, prev_mode;
+ int bits, sbits;
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+ volatile smc_t *smcp = pinfo->smcp;
+ volatile scc_t *sccp = pinfo->sccp;
+
+ pr_debug("CPM uart[%d]:set_termios\n", port->line);
+
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
+
+ /* Character length programmed into the mode register is the
+ * sum of: 1 start bit, number of data bits, 0 or 1 parity bit,
+ * 1 or 2 stop bits, minus 1.
+ * The value 'bits' counts this for us.
+ */
+ cval = 0;
+ scval = 0;
+
+ /* byte size */
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ bits = 5;
+ break;
+ case CS6:
+ bits = 6;
+ break;
+ case CS7:
+ bits = 7;
+ break;
+ case CS8:
+ bits = 8;
+ break;
+ /* Never happens, but GCC is too dumb to figure it out */
+ default:
+ bits = 8;
+ break;
+ }
+ sbits = bits - 5;
+
+ if (termios->c_cflag & CSTOPB) {
+ cval |= SMCMR_SL; /* Two stops */
+ scval |= SCU_PSMR_SL;
+ bits++;
+ }
+
+ if (termios->c_cflag & PARENB) {
+ cval |= SMCMR_PEN;
+ scval |= SCU_PSMR_PEN;
+ bits++;
+ if (!(termios->c_cflag & PARODD)) {
+ cval |= SMCMR_PM_EVEN;
+ scval |= (SCU_PSMR_REVP | SCU_PSMR_TEVP);
+ }
+ }
+
+ /*
+ * Set up parity check flag
+ */
+#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+
+ port->read_status_mask = (BD_SC_EMPTY | BD_SC_OV);
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= BD_SC_FR | BD_SC_PR;
+ if ((termios->c_iflag & BRKINT) || (termios->c_iflag & PARMRK))
+ port->read_status_mask |= BD_SC_BR;
+
+ /*
+ * Characters to ignore
+ */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= BD_SC_PR | BD_SC_FR;
+ if (termios->c_iflag & IGNBRK) {
+ port->ignore_status_mask |= BD_SC_BR;
+ /*
+ * If we're ignore parity and break indicators, ignore
+ * overruns too. (For real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= BD_SC_OV;
+ }
+ /*
+ * !!! ignore all characters if CREAD is not set
+ */
+ if ((termios->c_cflag & CREAD) == 0)
+ port->read_status_mask &= ~BD_SC_EMPTY;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* Start bit has not been added (so don't, because we would just
+ * subtract it later), and we need to add one for the number of
+ * stops bits (there is always at least one).
+ */
+ bits++;
+ if (IS_SMC(pinfo)) {
+ /* Set the mode register. We want to keep a copy of the
+ * enables, because we want to put them back if they were
+ * present.
+ */
+ prev_mode = smcp->smc_smcmr;
+ smcp->smc_smcmr = smcr_mk_clen(bits) | cval | SMCMR_SM_UART;
+ smcp->smc_smcmr |= (prev_mode & (SMCMR_REN | SMCMR_TEN));
+ } else {
+ sccp->scc_psmr = (sbits << 12) | scval;
+ }
+
+ cpm_set_brg(pinfo->brg - 1, baud);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+}
+
+static const char *cpm_uart_type(struct uart_port *port)
+{
+ pr_debug("CPM uart[%d]:uart_type\n", port->line);
+
+ return port->type == PORT_CPM ? "CPM UART" : NULL;
+}
+
+/*
+ * verify the new serial_struct (for TIOCSSERIAL).
+ */
+static int cpm_uart_verify_port(struct uart_port *port,
+ struct serial_struct *ser)
+{
+ int ret = 0;
+
+ pr_debug("CPM uart[%d]:verify_port\n", port->line);
+
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_CPM)
+ ret = -EINVAL;
+ if (ser->irq < 0 || ser->irq >= NR_IRQS)
+ ret = -EINVAL;
+ if (ser->baud_base < 9600)
+ ret = -EINVAL;
+ return ret;
+}
+
+/*
+ * Transmit characters, refill buffer descriptor, if possible
+ */
+static int cpm_uart_tx_pump(struct uart_port *port)
+{
+ volatile cbd_t *bdp;
+ unsigned char *p;
+ int count;
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+ struct circ_buf *xmit = &port->info->xmit;
+
+ /* Handle xon/xoff */
+ if (port->x_char) {
+ /* Pick next descriptor and fill from buffer */
+ bdp = pinfo->tx_cur;
+
+ p = bus_to_virt(bdp->cbd_bufaddr);
+ *p++ = xmit->buf[xmit->tail];
+ bdp->cbd_datlen = 1;
+ bdp->cbd_sc |= BD_SC_READY;
+ /* Get next BD. */
+ if (bdp->cbd_sc & BD_SC_WRAP)
+ bdp = pinfo->tx_bd_base;
+ else
+ bdp++;
+ pinfo->tx_cur = bdp;
+
+ port->icount.tx++;
+ port->x_char = 0;
+ return 1;
+ }
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ cpm_uart_stop_tx(port, 0);
+ return 0;
+ }
+
+ /* Pick next descriptor and fill from buffer */
+ bdp = pinfo->tx_cur;
+
+ while (!(bdp->cbd_sc & BD_SC_READY) && (xmit->tail != xmit->head)) {
+ count = 0;
+ p = bus_to_virt(bdp->cbd_bufaddr);
+ while (count < pinfo->tx_fifosize) {
+ *p++ = xmit->buf[xmit->tail];
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ count++;
+ if (xmit->head == xmit->tail)
+ break;
+ }
+ bdp->cbd_datlen = count;
+ bdp->cbd_sc |= BD_SC_READY;
+ /* Get next BD. */
+ if (bdp->cbd_sc & BD_SC_WRAP)
+ bdp = pinfo->tx_bd_base;
+ else
+ bdp++;
+ }
+ pinfo->tx_cur = bdp;
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit)) {
+ cpm_uart_stop_tx(port, 0);
+ return 0;
+ }
+
+ return 1;
+}
+
+/*
+ * init buffer descriptors
+ */
+static void cpm_uart_initbd(struct uart_cpm_port *pinfo)
+{
+ int i;
+ u8 *mem_addr;
+ volatile cbd_t *bdp;
+
+ pr_debug("CPM uart[%d]:initbd\n", pinfo->port.line);
+
+ /* Set the physical address of the host memory
+ * buffers in the buffer descriptors, and the
+ * virtual address for us to work with.
+ */
+ mem_addr = pinfo->mem_addr;
+ bdp = pinfo->rx_cur = pinfo->rx_bd_base;
+ for (i = 0; i < (pinfo->rx_nrfifos - 1); i++, bdp++) {
+ bdp->cbd_bufaddr = virt_to_bus(mem_addr);
+ bdp->cbd_sc = BD_SC_EMPTY | BD_SC_INTRPT;
+ mem_addr += pinfo->rx_fifosize;
+ }
+
+ bdp->cbd_bufaddr = virt_to_bus(mem_addr);
+ bdp->cbd_sc = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT;
+
+ /* Set the physical address of the host memory
+ * buffers in the buffer descriptors, and the
+ * virtual address for us to work with.
+ */
+ mem_addr = pinfo->mem_addr + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize);
+ bdp = pinfo->tx_cur = pinfo->tx_bd_base;
+ for (i = 0; i < (pinfo->tx_nrfifos - 1); i++, bdp++) {
+ bdp->cbd_bufaddr = virt_to_bus(mem_addr);
+ bdp->cbd_sc = BD_SC_INTRPT;
+ mem_addr += pinfo->tx_fifosize;
+ }
+
+ bdp->cbd_bufaddr = virt_to_bus(mem_addr);
+ bdp->cbd_sc = BD_SC_WRAP | BD_SC_INTRPT;
+}
+
+static void cpm_uart_init_scc(struct uart_cpm_port *pinfo)
+{
+ int line = pinfo - cpm_uart_ports;
+ volatile scc_t *scp;
+ volatile scc_uart_t *sup;
+
+ pr_debug("CPM uart[%d]:init_scc\n", pinfo->port.line);
+
+ scp = pinfo->sccp;
+ sup = pinfo->sccup;
+
+ /* Store address */
+ pinfo->sccup->scc_genscc.scc_rbase = (unsigned char *)pinfo->rx_bd_base - DPRAM_BASE;
+ pinfo->sccup->scc_genscc.scc_tbase = (unsigned char *)pinfo->tx_bd_base - DPRAM_BASE;
+
+ /* Set up the uart parameters in the
+ * parameter ram.
+ */
+
+ cpm_set_scc_fcr(sup);
+
+ sup->scc_genscc.scc_mrblr = pinfo->rx_fifosize;
+ sup->scc_maxidl = pinfo->rx_fifosize;
+ sup->scc_brkcr = 1;
+ sup->scc_parec = 0;
+ sup->scc_frmec = 0;
+ sup->scc_nosec = 0;
+ sup->scc_brkec = 0;
+ sup->scc_uaddr1 = 0;
+ sup->scc_uaddr2 = 0;
+ sup->scc_toseq = 0;
+ sup->scc_char1 = 0x8000;
+ sup->scc_char2 = 0x8000;
+ sup->scc_char3 = 0x8000;
+ sup->scc_char4 = 0x8000;
+ sup->scc_char5 = 0x8000;
+ sup->scc_char6 = 0x8000;
+ sup->scc_char7 = 0x8000;
+ sup->scc_char8 = 0x8000;
+ sup->scc_rccm = 0xc0ff;
+
+ /* Send the CPM an initialize command.
+ */
+ cpm_line_cr_cmd(line, CPM_CR_INIT_TRX);
+
+ /* Set UART mode, 8 bit, no parity, one stop.
+ * Enable receive and transmit.
+ */
+ scp->scc_gsmrh = 0;
+ scp->scc_gsmrl =
+ (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
+
+ /* Enable rx interrupts and clear all pending events. */
+ scp->scc_sccm = 0;
+ scp->scc_scce = 0xffff;
+ scp->scc_dsr = 0x7e7e;
+ scp->scc_psmr = 0x3000;
+
+ scp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+}
+
+static void cpm_uart_init_smc(struct uart_cpm_port *pinfo)
+{
+ int line = pinfo - cpm_uart_ports;
+ volatile smc_t *sp;
+ volatile smc_uart_t *up;
+
+ pr_debug("CPM uart[%d]:init_smc\n", pinfo->port.line);
+
+ sp = pinfo->smcp;
+ up = pinfo->smcup;
+
+ /* Store address */
+ pinfo->smcup->smc_rbase = (u_char *)pinfo->rx_bd_base - DPRAM_BASE;
+ pinfo->smcup->smc_tbase = (u_char *)pinfo->tx_bd_base - DPRAM_BASE;
+
+/*
+ * In case SMC1 is being relocated...
+ */
+#if defined (CONFIG_I2C_SPI_SMC1_UCODE_PATCH)
+ up->smc_rbptr = pinfo->smcup->smc_rbase;
+ up->smc_tbptr = pinfo->smcup->smc_tbase;
+ up->smc_rstate = 0;
+ up->smc_tstate = 0;
+ up->smc_brkcr = 1; /* number of break chars */
+ up->smc_brkec = 0;
+#endif
+
+ /* Set up the uart parameters in the
+ * parameter ram.
+ */
+ cpm_set_smc_fcr(up);
+
+ /* Using idle charater time requires some additional tuning. */
+ up->smc_mrblr = pinfo->rx_fifosize;
+ up->smc_maxidl = pinfo->rx_fifosize;
+ up->smc_brkcr = 1;
+
+ cpm_line_cr_cmd(line, CPM_CR_INIT_TRX);
+
+ /* Set UART mode, 8 bit, no parity, one stop.
+ * Enable receive and transmit.
+ */
+ sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
+
+ /* Enable only rx interrupts clear all pending events. */
+ sp->smc_smcm = 0;
+ sp->smc_smce = 0xff;
+
+ sp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN);
+}
+
+/*
+ * Initialize port. This is called from early_console stuff
+ * so we have to be careful here !
+ */
+static int cpm_uart_request_port(struct uart_port *port)
+{
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+ int ret;
+
+ pr_debug("CPM uart[%d]:request port\n", port->line);
+
+ if (pinfo->flags & FLAG_CONSOLE)
+ return 0;
+
+ /*
+ * Setup any port IO, connect any baud rate generators,
+ * etc. This is expected to be handled by board
+ * dependant code
+ */
+ if (pinfo->set_lineif)
+ pinfo->set_lineif(pinfo);
+
+ if (IS_SMC(pinfo)) {
+ pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
+ pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+ } else {
+ pinfo->sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX);
+ pinfo->sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+ }
+
+ ret = cpm_uart_allocbuf(pinfo, 0);
+
+ if (ret)
+ return ret;
+
+ cpm_uart_initbd(pinfo);
+
+ return 0;
+}
+
+static void cpm_uart_release_port(struct uart_port *port)
+{
+ struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
+
+ if (!(pinfo->flags & FLAG_CONSOLE))
+ cpm_uart_freebuf(pinfo);
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void cpm_uart_config_port(struct uart_port *port, int flags)
+{
+ pr_debug("CPM uart[%d]:config_port\n", port->line);
+
+ if (flags & UART_CONFIG_TYPE) {
+ port->type = PORT_CPM;
+ cpm_uart_request_port(port);
+ }
+}
+static struct uart_ops cpm_uart_pops = {
+ .tx_empty = cpm_uart_tx_empty,
+ .set_mctrl = cpm_uart_set_mctrl,
+ .get_mctrl = cpm_uart_get_mctrl,
+ .stop_tx = cpm_uart_stop_tx,
+ .start_tx = cpm_uart_start_tx,
+ .stop_rx = cpm_uart_stop_rx,
+ .enable_ms = cpm_uart_enable_ms,
+ .break_ctl = cpm_uart_break_ctl,
+ .startup = cpm_uart_startup,
+ .shutdown = cpm_uart_shutdown,
+ .set_termios = cpm_uart_set_termios,
+ .type = cpm_uart_type,
+ .release_port = cpm_uart_release_port,
+ .request_port = cpm_uart_request_port,
+ .config_port = cpm_uart_config_port,
+ .verify_port = cpm_uart_verify_port,
+};
+
+struct uart_cpm_port cpm_uart_ports[UART_NR] = {
+ [UART_SMC1] = {
+ .port = {
+ .irq = SMC1_IRQ,
+ .ops = &cpm_uart_pops,
+ .iotype = SERIAL_IO_MEM,
+ .lock = SPIN_LOCK_UNLOCKED,
+ },
+ .flags = FLAG_SMC,
+ .tx_nrfifos = TX_NUM_FIFO,
+ .tx_fifosize = TX_BUF_SIZE,
+ .rx_nrfifos = RX_NUM_FIFO,
+ .rx_fifosize = RX_BUF_SIZE,
+ .set_lineif = smc1_lineif,
+ },
+ [UART_SMC2] = {
+ .port = {
+ .irq = SMC2_IRQ,
+ .ops = &cpm_uart_pops,
+ .iotype = SERIAL_IO_MEM,
+ .lock = SPIN_LOCK_UNLOCKED,
+ },
+ .flags = FLAG_SMC,
+ .tx_nrfifos = TX_NUM_FIFO,
+ .tx_fifosize = TX_BUF_SIZE,
+ .rx_nrfifos = RX_NUM_FIFO,
+ .rx_fifosize = RX_BUF_SIZE,
+ .set_lineif = smc2_lineif,
+#ifdef CONFIG_SERIAL_CPM_ALT_SMC2
+ .is_portb = 1,
+#endif
+ },
+ [UART_SCC1] = {
+ .port = {
+ .irq = SCC1_IRQ,
+ .ops = &cpm_uart_pops,
+ .iotype = SERIAL_IO_MEM,
+ .lock = SPIN_LOCK_UNLOCKED,
+ },
+ .tx_nrfifos = TX_NUM_FIFO,
+ .tx_fifosize = TX_BUF_SIZE,
+ .rx_nrfifos = RX_NUM_FIFO,
+ .rx_fifosize = RX_BUF_SIZE,
+ .set_lineif = scc1_lineif,
+ },
+ [UART_SCC2] = {
+ .port = {
+ .irq = SCC2_IRQ,
+ .ops = &cpm_uart_pops,
+ .iotype = SERIAL_IO_MEM,
+ .lock = SPIN_LOCK_UNLOCKED,
+ },
+ .tx_nrfifos = TX_NUM_FIFO,
+ .tx_fifosize = TX_BUF_SIZE,
+ .rx_nrfifos = RX_NUM_FIFO,
+ .rx_fifosize = RX_BUF_SIZE,
+ .set_lineif = scc2_lineif,
+ },
+ [UART_SCC3] = {
+ .port = {
+ .irq = SCC3_IRQ,
+ .ops = &cpm_uart_pops,
+ .iotype = SERIAL_IO_MEM,
+ .lock = SPIN_LOCK_UNLOCKED,
+ },
+ .tx_nrfifos = TX_NUM_FIFO,
+ .tx_fifosize = TX_BUF_SIZE,
+ .rx_nrfifos = RX_NUM_FIFO,
+ .rx_fifosize = RX_BUF_SIZE,
+ .set_lineif = scc3_lineif,
+ },
+ [UART_SCC4] = {
+ .port = {
+ .irq = SCC4_IRQ,
+ .ops = &cpm_uart_pops,
+ .iotype = SERIAL_IO_MEM,
+ .lock = SPIN_LOCK_UNLOCKED,
+ },
+ .tx_nrfifos = TX_NUM_FIFO,
+ .tx_fifosize = TX_BUF_SIZE,
+ .rx_nrfifos = RX_NUM_FIFO,
+ .rx_fifosize = RX_BUF_SIZE,
+ .set_lineif = scc4_lineif,
+ },
+};
+
+#ifdef CONFIG_SERIAL_CPM_CONSOLE
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ *
+ * Note that this is called with interrupts already disabled
+ */
+static void cpm_uart_console_write(struct console *co, const char *s,
+ u_int count)
+{
+ struct uart_cpm_port *pinfo =
+ &cpm_uart_ports[cpm_uart_port_map[co->index]];
+ unsigned int i;
+ volatile cbd_t *bdp, *bdbase;
+ volatile unsigned char *cp;
+
+ /* Get the address of the host memory buffer.
+ */
+ bdp = pinfo->tx_cur;
+ bdbase = pinfo->tx_bd_base;
+
+ /*
+ * Now, do each character. This is not as bad as it looks
+ * since this is a holding FIFO and not a transmitting FIFO.
+ * We could add the complexity of filling the entire transmit
+ * buffer, but we would just wait longer between accesses......
+ */
+ for (i = 0; i < count; i++, s++) {
+ /* Wait for transmitter fifo to empty.
+ * Ready indicates output is ready, and xmt is doing
+ * that, not that it is ready for us to send.
+ */
+ while ((bdp->cbd_sc & BD_SC_READY) != 0)
+ ;
+
+ /* Send the character out.
+ * If the buffer address is in the CPM DPRAM, don't
+ * convert it.
+ */
+ if ((uint) (bdp->cbd_bufaddr) > (uint) CPM_ADDR)
+ cp = (unsigned char *) (bdp->cbd_bufaddr);
+ else
+ cp = bus_to_virt(bdp->cbd_bufaddr);
+
+ *cp = *s;
+
+ bdp->cbd_datlen = 1;
+ bdp->cbd_sc |= BD_SC_READY;
+
+ if (bdp->cbd_sc & BD_SC_WRAP)
+ bdp = bdbase;
+ else
+ bdp++;
+
+ /* if a LF, also do CR... */
+ if (*s == 10) {
+ while ((bdp->cbd_sc & BD_SC_READY) != 0)
+ ;
+
+ if ((uint) (bdp->cbd_bufaddr) > (uint) CPM_ADDR)
+ cp = (unsigned char *) (bdp->cbd_bufaddr);
+ else
+ cp = bus_to_virt(bdp->cbd_bufaddr);
+
+ *cp = 13;
+ bdp->cbd_datlen = 1;
+ bdp->cbd_sc |= BD_SC_READY;
+
+ if (bdp->cbd_sc & BD_SC_WRAP)
+ bdp = bdbase;
+ else
+ bdp++;
+ }
+ }
+
+ /*
+ * Finally, Wait for transmitter & holding register to empty
+ * and restore the IER
+ */
+ while ((bdp->cbd_sc & BD_SC_READY) != 0)
+ ;
+
+ pinfo->tx_cur = (volatile cbd_t *) bdp;
+}
+
+/*
+ * Setup console. Be careful is called early !
+ */
+static int __init cpm_uart_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ struct uart_cpm_port *pinfo;
+ int baud = 38400;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+ int ret;
+
+ port =
+ (struct uart_port *)&cpm_uart_ports[cpm_uart_port_map[co->index]];
+ pinfo = (struct uart_cpm_port *)port;
+
+ pinfo->flags |= FLAG_CONSOLE;
+
+ if (options) {
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ } else {
+ bd_t *bd = (bd_t *) __res;
+
+ if (bd->bi_baudrate)
+ baud = bd->bi_baudrate;
+ else
+ baud = 9600;
+ }
+
+ /*
+ * Setup any port IO, connect any baud rate generators,
+ * etc. This is expected to be handled by board
+ * dependant code
+ */
+ if (pinfo->set_lineif)
+ pinfo->set_lineif(pinfo);
+
+ if (IS_SMC(pinfo)) {
+ pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
+ pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+ } else {
+ pinfo->sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX);
+ pinfo->sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+ }
+
+ ret = cpm_uart_allocbuf(pinfo, 1);
+
+ if (ret)
+ return ret;
+
+ cpm_uart_initbd(pinfo);
+
+ if (IS_SMC(pinfo))
+ cpm_uart_init_smc(pinfo);
+ else
+ cpm_uart_init_scc(pinfo);
+
+ uart_set_options(port, co, baud, parity, bits, flow);
+
+ return 0;
+}
+
+extern struct uart_driver cpm_reg;
+static struct console cpm_scc_uart_console = {
+ .name "ttyCPM",
+ .write cpm_uart_console_write,
+ .device uart_console_device,
+ .setup cpm_uart_console_setup,
+ .flags CON_PRINTBUFFER,
+ .index -1,
+ .data = &cpm_reg,
+};
+
+int __init cpm_uart_console_init(void)
+{
+ int ret = cpm_uart_init_portdesc();
+
+ if (!ret)
+ register_console(&cpm_scc_uart_console);
+ return ret;
+}
+
+console_initcall(cpm_uart_console_init);
+
+#define CPM_UART_CONSOLE &cpm_scc_uart_console
+#else
+#define CPM_UART_CONSOLE NULL
+#endif
+
+static struct uart_driver cpm_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "ttyCPM",
+ .dev_name = "ttyCPM",
+ .major = SERIAL_CPM_MAJOR,
+ .minor = SERIAL_CPM_MINOR,
+ .cons = CPM_UART_CONSOLE,
+};
+
+static int __init cpm_uart_init(void)
+{
+ int ret, i;
+
+ printk(KERN_INFO "Serial: CPM driver $Revision: 0.01 $\n");
+
+#ifndef CONFIG_SERIAL_CPM_CONSOLE
+ ret = cpm_uart_init_portdesc();
+ if (ret)
+ return ret;
+#endif
+
+ cpm_reg.nr = cpm_uart_nr;
+ ret = uart_register_driver(&cpm_reg);
+
+ if (ret)
+ return ret;
+
+ for (i = 0; i < cpm_uart_nr; i++) {
+ int con = cpm_uart_port_map[i];
+ cpm_uart_ports[con].port.line = i;
+ cpm_uart_ports[con].port.flags = UPF_BOOT_AUTOCONF;
+ uart_add_one_port(&cpm_reg, &cpm_uart_ports[con].port);
+ }
+
+ return ret;
+}
+
+static void __exit cpm_uart_exit(void)
+{
+ int i;
+
+ for (i = 0; i < cpm_uart_nr; i++) {
+ int con = cpm_uart_port_map[i];
+ uart_remove_one_port(&cpm_reg, &cpm_uart_ports[con].port);
+ }
+
+ uart_unregister_driver(&cpm_reg);
+}
+
+module_init(cpm_uart_init);
+module_exit(cpm_uart_exit);
+
+MODULE_AUTHOR("Kumar Gala/Antoniou Pantelis");
+MODULE_DESCRIPTION("CPM SCC/SMC port driver $Revision: 0.01 $");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_CHARDEV(SERIAL_CPM_MAJOR, SERIAL_CPM_MINOR);
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
new file mode 100644
index 00000000000..de26cf7b003
--- /dev/null
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -0,0 +1,290 @@
+/*
+ * linux/drivers/serial/cpm_uart.c
+ *
+ * Driver for CPM (SCC/SMC) serial ports; CPM1 definitions
+ *
+ * Maintainer: Kumar Gala (kumar.gala@freescale.com) (CPM2)
+ * Pantelis Antoniou (panto@intracom.gr) (CPM1)
+ *
+ * Copyright (C) 2004 Freescale Semiconductor, Inc.
+ * (C) 2004 Intracom, S.A.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/device.h>
+#include <linux/bootmem.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <linux/serial_core.h>
+#include <linux/kernel.h>
+
+#include "cpm_uart.h"
+
+/**************************************************************/
+
+void cpm_line_cr_cmd(int line, int cmd)
+{
+ ushort val;
+ volatile cpm8xx_t *cp = cpmp;
+
+ switch (line) {
+ case UART_SMC1:
+ val = mk_cr_cmd(CPM_CR_CH_SMC1, cmd) | CPM_CR_FLG;
+ break;
+ case UART_SMC2:
+ val = mk_cr_cmd(CPM_CR_CH_SMC2, cmd) | CPM_CR_FLG;
+ break;
+ case UART_SCC1:
+ val = mk_cr_cmd(CPM_CR_CH_SCC1, cmd) | CPM_CR_FLG;
+ break;
+ case UART_SCC2:
+ val = mk_cr_cmd(CPM_CR_CH_SCC2, cmd) | CPM_CR_FLG;
+ break;
+ case UART_SCC3:
+ val = mk_cr_cmd(CPM_CR_CH_SCC3, cmd) | CPM_CR_FLG;
+ break;
+ case UART_SCC4:
+ val = mk_cr_cmd(CPM_CR_CH_SCC4, cmd) | CPM_CR_FLG;
+ break;
+ default:
+ return;
+
+ }
+ cp->cp_cpcr = val;
+ while (cp->cp_cpcr & CPM_CR_FLG) ;
+}
+
+void smc1_lineif(struct uart_cpm_port *pinfo)
+{
+ volatile cpm8xx_t *cp = cpmp;
+ unsigned int iobits = 0x000000c0;
+
+ if (!pinfo->is_portb) {
+ cp->cp_pbpar |= iobits;
+ cp->cp_pbdir &= ~iobits;
+ cp->cp_pbodr &= ~iobits;
+ } else {
+ ((immap_t *)IMAP_ADDR)->im_ioport.iop_papar |= iobits;
+ ((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits;
+ ((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits;
+ }
+
+ pinfo->brg = 1;
+}
+
+void smc2_lineif(struct uart_cpm_port *pinfo)
+{
+ /* XXX SMC2: insert port configuration here */
+ pinfo->brg = 2;
+}
+
+void scc1_lineif(struct uart_cpm_port *pinfo)
+{
+ /* XXX SCC1: insert port configuration here */
+ pinfo->brg = 1;
+}
+
+void scc2_lineif(struct uart_cpm_port *pinfo)
+{
+ /* XXX SCC2: insert port configuration here */
+ pinfo->brg = 2;
+}
+
+void scc3_lineif(struct uart_cpm_port *pinfo)
+{
+ /* XXX SCC3: insert port configuration here */
+ pinfo->brg = 3;
+}
+
+void scc4_lineif(struct uart_cpm_port *pinfo)
+{
+ /* XXX SCC4: insert port configuration here */
+ pinfo->brg = 4;
+}
+
+/*
+ * Allocate DP-Ram and memory buffers. We need to allocate a transmit and
+ * receive buffer descriptors from dual port ram, and a character
+ * buffer area from host mem. If we are allocating for the console we need
+ * to do it from bootmem
+ */
+int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
+{
+ int dpmemsz, memsz;
+ u8 *dp_mem;
+ uint dp_offset;
+ u8 *mem_addr;
+ dma_addr_t dma_addr = 0;
+
+ pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line);
+
+ dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos);
+ dp_offset = cpm_dpalloc(dpmemsz, 8);
+ if (IS_DPERR(dp_offset)) {
+ printk(KERN_ERR
+ "cpm_uart_cpm1.c: could not allocate buffer descriptors\n");
+ return -ENOMEM;
+ }
+ dp_mem = cpm_dpram_addr(dp_offset);
+
+ memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
+ L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
+ if (is_con) {
+ mem_addr = (u8 *) m8xx_cpm_hostalloc(memsz);
+ dma_addr = 0;
+ } else
+ mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
+ GFP_KERNEL);
+
+ if (mem_addr == NULL) {
+ cpm_dpfree(dp_offset);
+ printk(KERN_ERR
+ "cpm_uart_cpm1.c: could not allocate coherent memory\n");
+ return -ENOMEM;
+ }
+
+ pinfo->dp_addr = dp_offset;
+ pinfo->mem_addr = mem_addr;
+ pinfo->dma_addr = dma_addr;
+
+ pinfo->rx_buf = mem_addr;
+ pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos
+ * pinfo->rx_fifosize);
+
+ pinfo->rx_bd_base = (volatile cbd_t *)dp_mem;
+ pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos;
+
+ return 0;
+}
+
+void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
+{
+ dma_free_coherent(NULL, L1_CACHE_ALIGN(pinfo->rx_nrfifos *
+ pinfo->rx_fifosize) +
+ L1_CACHE_ALIGN(pinfo->tx_nrfifos *
+ pinfo->tx_fifosize), pinfo->mem_addr,
+ pinfo->dma_addr);
+
+ cpm_dpfree(pinfo->dp_addr);
+}
+
+/* Setup any dynamic params in the uart desc */
+int cpm_uart_init_portdesc(void)
+{
+ pr_debug("CPM uart[-]:init portdesc\n");
+
+ cpm_uart_nr = 0;
+#ifdef CONFIG_SERIAL_CPM_SMC1
+ cpm_uart_ports[UART_SMC1].smcp = &cpmp->cp_smc[0];
+/*
+ * Is SMC1 being relocated?
+ */
+# ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH
+ cpm_uart_ports[UART_SMC1].smcup =
+ (smc_uart_t *) & cpmp->cp_dparam[0x3C0];
+# else
+ cpm_uart_ports[UART_SMC1].smcup =
+ (smc_uart_t *) & cpmp->cp_dparam[PROFF_SMC1];
+# endif
+ cpm_uart_ports[UART_SMC1].port.mapbase =
+ (unsigned long)&cpmp->cp_smc[0];
+ cpm_uart_ports[UART_SMC1].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
+ cpm_uart_ports[UART_SMC1].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+ cpm_uart_ports[UART_SMC1].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+ cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1;
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SMC2
+ cpm_uart_ports[UART_SMC2].smcp = &cpmp->cp_smc[1];
+ cpm_uart_ports[UART_SMC2].smcup =
+ (smc_uart_t *) & cpmp->cp_dparam[PROFF_SMC2];
+ cpm_uart_ports[UART_SMC2].port.mapbase =
+ (unsigned long)&cpmp->cp_smc[1];
+ cpm_uart_ports[UART_SMC2].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
+ cpm_uart_ports[UART_SMC2].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+ cpm_uart_ports[UART_SMC2].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+ cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2;
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SCC1
+ cpm_uart_ports[UART_SCC1].sccp = &cpmp->cp_scc[0];
+ cpm_uart_ports[UART_SCC1].sccup =
+ (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC1];
+ cpm_uart_ports[UART_SCC1].port.mapbase =
+ (unsigned long)&cpmp->cp_scc[0];
+ cpm_uart_ports[UART_SCC1].sccp->scc_sccm &=
+ ~(UART_SCCM_TX | UART_SCCM_RX);
+ cpm_uart_ports[UART_SCC1].sccp->scc_gsmrl &=
+ ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+ cpm_uart_ports[UART_SCC1].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+ cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1;
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SCC2
+ cpm_uart_ports[UART_SCC2].sccp = &cpmp->cp_scc[1];
+ cpm_uart_ports[UART_SCC2].sccup =
+ (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC2];
+ cpm_uart_ports[UART_SCC2].port.mapbase =
+ (unsigned long)&cpmp->cp_scc[1];
+ cpm_uart_ports[UART_SCC2].sccp->scc_sccm &=
+ ~(UART_SCCM_TX | UART_SCCM_RX);
+ cpm_uart_ports[UART_SCC2].sccp->scc_gsmrl &=
+ ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+ cpm_uart_ports[UART_SCC2].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+ cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2;
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SCC3
+ cpm_uart_ports[UART_SCC3].sccp = &cpmp->cp_scc[2];
+ cpm_uart_ports[UART_SCC3].sccup =
+ (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC3];
+ cpm_uart_ports[UART_SCC3].port.mapbase =
+ (unsigned long)&cpmp->cp_scc[2];
+ cpm_uart_ports[UART_SCC3].sccp->scc_sccm &=
+ ~(UART_SCCM_TX | UART_SCCM_RX);
+ cpm_uart_ports[UART_SCC3].sccp->scc_gsmrl &=
+ ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+ cpm_uart_ports[UART_SCC3].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+ cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3;
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SCC4
+ cpm_uart_ports[UART_SCC4].sccp = &cpmp->cp_scc[3];
+ cpm_uart_ports[UART_SCC4].sccup =
+ (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC4];
+ cpm_uart_ports[UART_SCC4].port.mapbase =
+ (unsigned long)&cpmp->cp_scc[3];
+ cpm_uart_ports[UART_SCC4].sccp->scc_sccm &=
+ ~(UART_SCCM_TX | UART_SCCM_RX);
+ cpm_uart_ports[UART_SCC4].sccp->scc_gsmrl &=
+ ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+ cpm_uart_ports[UART_SCC4].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+ cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4;
+#endif
+ return 0;
+}
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.h b/drivers/serial/cpm_uart/cpm_uart_cpm1.h
new file mode 100644
index 00000000000..5d867ab581b
--- /dev/null
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.h
@@ -0,0 +1,45 @@
+/*
+ * linux/drivers/serial/cpm_uart_cpm1.h
+ *
+ * Driver for CPM (SCC/SMC) serial ports
+ *
+ * definitions for cpm1
+ *
+ */
+
+#ifndef CPM_UART_CPM1_H
+#define CPM_UART_CPM1_H
+
+#include <asm/commproc.h>
+
+/* defines for IRQs */
+#define SMC1_IRQ (CPM_IRQ_OFFSET + CPMVEC_SMC1)
+#define SMC2_IRQ (CPM_IRQ_OFFSET + CPMVEC_SMC2)
+#define SCC1_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC1)
+#define SCC2_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC2)
+#define SCC3_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC3)
+#define SCC4_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC4)
+
+/* the CPM address */
+#define CPM_ADDR IMAP_ADDR
+
+static inline void cpm_set_brg(int brg, int baud)
+{
+ cpm_setbrg(brg, baud);
+}
+
+static inline void cpm_set_scc_fcr(volatile scc_uart_t * sup)
+{
+ sup->scc_genscc.scc_rfcr = SMC_EB;
+ sup->scc_genscc.scc_tfcr = SMC_EB;
+}
+
+static inline void cpm_set_smc_fcr(volatile smc_uart_t * up)
+{
+ up->smc_rfcr = SMC_EB;
+ up->smc_tfcr = SMC_EB;
+}
+
+#define DPRAM_BASE ((unsigned char *)&cpmp->cp_dpmem[0])
+
+#endif
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
new file mode 100644
index 00000000000..b422c3abfba
--- /dev/null
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -0,0 +1,328 @@
+/*
+ * linux/drivers/serial/cpm_uart_cpm2.c
+ *
+ * Driver for CPM (SCC/SMC) serial ports; CPM2 definitions
+ *
+ * Maintainer: Kumar Gala (kumar.gala@freescale.com) (CPM2)
+ * Pantelis Antoniou (panto@intracom.gr) (CPM1)
+ *
+ * Copyright (C) 2004 Freescale Semiconductor, Inc.
+ * (C) 2004 Intracom, S.A.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/device.h>
+#include <linux/bootmem.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <linux/serial_core.h>
+#include <linux/kernel.h>
+
+#include "cpm_uart.h"
+
+/**************************************************************/
+
+void cpm_line_cr_cmd(int line, int cmd)
+{
+ volatile cpm_cpm2_t *cp = cpmp;
+ ulong val;
+
+ switch (line) {
+ case UART_SMC1:
+ val = mk_cr_cmd(CPM_CR_SMC1_PAGE, CPM_CR_SMC1_SBLOCK, 0,
+ cmd) | CPM_CR_FLG;
+ break;
+ case UART_SMC2:
+ val = mk_cr_cmd(CPM_CR_SMC2_PAGE, CPM_CR_SMC2_SBLOCK, 0,
+ cmd) | CPM_CR_FLG;
+ break;
+ case UART_SCC1:
+ val = mk_cr_cmd(CPM_CR_SCC1_PAGE, CPM_CR_SCC1_SBLOCK, 0,
+ cmd) | CPM_CR_FLG;
+ break;
+ case UART_SCC2:
+ val = mk_cr_cmd(CPM_CR_SCC2_PAGE, CPM_CR_SCC2_SBLOCK, 0,
+ cmd) | CPM_CR_FLG;
+ break;
+ case UART_SCC3:
+ val = mk_cr_cmd(CPM_CR_SCC3_PAGE, CPM_CR_SCC3_SBLOCK, 0,
+ cmd) | CPM_CR_FLG;
+ break;
+ case UART_SCC4:
+ val = mk_cr_cmd(CPM_CR_SCC4_PAGE, CPM_CR_SCC4_SBLOCK, 0,
+ cmd) | CPM_CR_FLG;
+ break;
+ default:
+ return;
+
+ }
+ cp->cp_cpcr = val;
+ while (cp->cp_cpcr & CPM_CR_FLG) ;
+}
+
+void smc1_lineif(struct uart_cpm_port *pinfo)
+{
+ volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
+
+ /* SMC1 is only on port D */
+ io->iop_ppard |= 0x00c00000;
+ io->iop_pdird |= 0x00400000;
+ io->iop_pdird &= ~0x00800000;
+ io->iop_psord &= ~0x00c00000;
+
+ /* Wire BRG1 to SMC1 */
+ cpm2_immr->im_cpmux.cmx_smr &= 0x0f;
+ pinfo->brg = 1;
+}
+
+void smc2_lineif(struct uart_cpm_port *pinfo)
+{
+ volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
+
+ /* SMC2 is only on port A */
+ io->iop_ppara |= 0x00c00000;
+ io->iop_pdira |= 0x00400000;
+ io->iop_pdira &= ~0x00800000;
+ io->iop_psora &= ~0x00c00000;
+
+ /* Wire BRG2 to SMC2 */
+ cpm2_immr->im_cpmux.cmx_smr &= 0xf0;
+ pinfo->brg = 2;
+}
+
+void scc1_lineif(struct uart_cpm_port *pinfo)
+{
+ volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
+
+ /* Use Port D for SCC1 instead of other functions. */
+ io->iop_ppard |= 0x00000003;
+ io->iop_psord &= ~0x00000001; /* Rx */
+ io->iop_psord |= 0x00000002; /* Tx */
+ io->iop_pdird &= ~0x00000001; /* Rx */
+ io->iop_pdird |= 0x00000002; /* Tx */
+
+ /* Wire BRG1 to SCC1 */
+ cpm2_immr->im_cpmux.cmx_scr &= 0x00ffffff;
+ cpm2_immr->im_cpmux.cmx_scr |= 0x00000000;
+ pinfo->brg = 1;
+}
+
+void scc2_lineif(struct uart_cpm_port *pinfo)
+{
+ volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
+ io->iop_pparb |= 0x008b0000;
+ io->iop_pdirb |= 0x00880000;
+ io->iop_psorb |= 0x00880000;
+ io->iop_pdirb &= ~0x00030000;
+ io->iop_psorb &= ~0x00030000;
+ cpm2_immr->im_cpmux.cmx_scr &= 0xff00ffff;
+ cpm2_immr->im_cpmux.cmx_scr |= 0x00090000;
+ pinfo->brg = 2;
+}
+
+void scc3_lineif(struct uart_cpm_port *pinfo)
+{
+ volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
+ io->iop_pparb |= 0x008b0000;
+ io->iop_pdirb |= 0x00880000;
+ io->iop_psorb |= 0x00880000;
+ io->iop_pdirb &= ~0x00030000;
+ io->iop_psorb &= ~0x00030000;
+ cpm2_immr->im_cpmux.cmx_scr &= 0xffff00ff;
+ cpm2_immr->im_cpmux.cmx_scr |= 0x00001200;
+ pinfo->brg = 3;
+}
+
+void scc4_lineif(struct uart_cpm_port *pinfo)
+{
+ volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
+
+ io->iop_ppard |= 0x00000600;
+ io->iop_psord &= ~0x00000600; /* Tx/Rx */
+ io->iop_pdird &= ~0x00000200; /* Rx */
+ io->iop_pdird |= 0x00000400; /* Tx */
+
+ cpm2_immr->im_cpmux.cmx_scr &= 0xffffff00;
+ cpm2_immr->im_cpmux.cmx_scr |= 0x0000001b;
+ pinfo->brg = 4;
+}
+
+/*
+ * Allocate DP-Ram and memory buffers. We need to allocate a transmit and
+ * receive buffer descriptors from dual port ram, and a character
+ * buffer area from host mem. If we are allocating for the console we need
+ * to do it from bootmem
+ */
+int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
+{
+ int dpmemsz, memsz;
+ u8 *dp_mem;
+ uint dp_offset;
+ u8 *mem_addr;
+ dma_addr_t dma_addr = 0;
+
+ pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line);
+
+ dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos);
+ dp_offset = cpm_dpalloc(dpmemsz, 8);
+ if (IS_DPERR(dp_offset)) {
+ printk(KERN_ERR
+ "cpm_uart_cpm.c: could not allocate buffer descriptors\n");
+ return -ENOMEM;
+ }
+
+ dp_mem = cpm_dpram_addr(dp_offset);
+
+ memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
+ L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
+ if (is_con)
+ mem_addr = alloc_bootmem(memsz);
+ else
+ mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
+ GFP_KERNEL);
+
+ if (mem_addr == NULL) {
+ cpm_dpfree(dp_offset);
+ printk(KERN_ERR
+ "cpm_uart_cpm.c: could not allocate coherent memory\n");
+ return -ENOMEM;
+ }
+
+ pinfo->dp_addr = dp_offset;
+ pinfo->mem_addr = mem_addr;
+ pinfo->dma_addr = dma_addr;
+
+ pinfo->rx_buf = mem_addr;
+ pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos
+ * pinfo->rx_fifosize);
+
+ pinfo->rx_bd_base = (volatile cbd_t *)dp_mem;
+ pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos;
+
+ return 0;
+}
+
+void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
+{
+ dma_free_coherent(NULL, L1_CACHE_ALIGN(pinfo->rx_nrfifos *
+ pinfo->rx_fifosize) +
+ L1_CACHE_ALIGN(pinfo->tx_nrfifos *
+ pinfo->tx_fifosize), pinfo->mem_addr,
+ pinfo->dma_addr);
+
+ cpm_dpfree(pinfo->dp_addr);
+}
+
+/* Setup any dynamic params in the uart desc */
+int cpm_uart_init_portdesc(void)
+{
+ pr_debug("CPM uart[-]:init portdesc\n");
+
+ cpm_uart_nr = 0;
+#ifdef CONFIG_SERIAL_CPM_SMC1
+ cpm_uart_ports[UART_SMC1].smcp = (smc_t *) & cpm2_immr->im_smc[0];
+ cpm_uart_ports[UART_SMC1].smcup =
+ (smc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SMC1];
+ cpm_uart_ports[UART_SMC1].port.mapbase =
+ (unsigned long)&cpm2_immr->im_smc[0];
+ cpm_uart_ports[UART_SMC1].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
+ cpm_uart_ports[UART_SMC1].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+ cpm_uart_ports[UART_SMC1].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+ cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1;
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SMC2
+ cpm_uart_ports[UART_SMC2].smcp = (smc_t *) & cpm2_immr->im_smc[1];
+ cpm_uart_ports[UART_SMC2].smcup =
+ (smc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SMC2];
+ cpm_uart_ports[UART_SMC2].port.mapbase =
+ (unsigned long)&cpm2_immr->im_smc[1];
+ cpm_uart_ports[UART_SMC2].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
+ cpm_uart_ports[UART_SMC2].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+ cpm_uart_ports[UART_SMC2].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+ cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2;
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SCC1
+ cpm_uart_ports[UART_SCC1].sccp = (scc_t *) & cpm2_immr->im_scc[0];
+ cpm_uart_ports[UART_SCC1].sccup =
+ (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC1];
+ cpm_uart_ports[UART_SCC1].port.mapbase =
+ (unsigned long)&cpm2_immr->im_scc[0];
+ cpm_uart_ports[UART_SCC1].sccp->scc_sccm &=
+ ~(UART_SCCM_TX | UART_SCCM_RX);
+ cpm_uart_ports[UART_SCC1].sccp->scc_gsmrl &=
+ ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+ cpm_uart_ports[UART_SCC1].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+ cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1;
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SCC2
+ cpm_uart_ports[UART_SCC2].sccp = (scc_t *) & cpm2_immr->im_scc[1];
+ cpm_uart_ports[UART_SCC2].sccup =
+ (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC2];
+ cpm_uart_ports[UART_SCC2].port.mapbase =
+ (unsigned long)&cpm2_immr->im_scc[1];
+ cpm_uart_ports[UART_SCC2].sccp->scc_sccm &=
+ ~(UART_SCCM_TX | UART_SCCM_RX);
+ cpm_uart_ports[UART_SCC2].sccp->scc_gsmrl &=
+ ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+ cpm_uart_ports[UART_SCC2].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+ cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2;
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SCC3
+ cpm_uart_ports[UART_SCC3].sccp = (scc_t *) & cpm2_immr->im_scc[2];
+ cpm_uart_ports[UART_SCC3].sccup =
+ (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC3];
+ cpm_uart_ports[UART_SCC3].port.mapbase =
+ (unsigned long)&cpm2_immr->im_scc[2];
+ cpm_uart_ports[UART_SCC3].sccp->scc_sccm &=
+ ~(UART_SCCM_TX | UART_SCCM_RX);
+ cpm_uart_ports[UART_SCC3].sccp->scc_gsmrl &=
+ ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+ cpm_uart_ports[UART_SCC3].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+ cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3;
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SCC4
+ cpm_uart_ports[UART_SCC4].sccp = (scc_t *) & cpm2_immr->im_scc[3];
+ cpm_uart_ports[UART_SCC4].sccup =
+ (scc_uart_t *) & cpm2_immr->im_dprambase[PROFF_SCC4];
+ cpm_uart_ports[UART_SCC4].port.mapbase =
+ (unsigned long)&cpm2_immr->im_scc[3];
+ cpm_uart_ports[UART_SCC4].sccp->scc_sccm &=
+ ~(UART_SCCM_TX | UART_SCCM_RX);
+ cpm_uart_ports[UART_SCC4].sccp->scc_gsmrl &=
+ ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+ cpm_uart_ports[UART_SCC4].port.uartclk = (((bd_t *) __res)->bi_intfreq);
+ cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4;
+#endif
+
+ return 0;
+}
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.h b/drivers/serial/cpm_uart/cpm_uart_cpm2.h
new file mode 100644
index 00000000000..4793fecf8ec
--- /dev/null
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.h
@@ -0,0 +1,45 @@
+/*
+ * linux/drivers/serial/cpm_uart_cpm2.h
+ *
+ * Driver for CPM (SCC/SMC) serial ports
+ *
+ * definitions for cpm2
+ *
+ */
+
+#ifndef CPM_UART_CPM2_H
+#define CPM_UART_CPM2_H
+
+#include <asm/cpm2.h>
+
+/* defines for IRQs */
+#define SMC1_IRQ SIU_INT_SMC1
+#define SMC2_IRQ SIU_INT_SMC2
+#define SCC1_IRQ SIU_INT_SCC1
+#define SCC2_IRQ SIU_INT_SCC2
+#define SCC3_IRQ SIU_INT_SCC3
+#define SCC4_IRQ SIU_INT_SCC4
+
+/* the CPM address */
+#define CPM_ADDR CPM_MAP_ADDR
+
+static inline void cpm_set_brg(int brg, int baud)
+{
+ cpm_setbrg(brg, baud);
+}
+
+static inline void cpm_set_scc_fcr(volatile scc_uart_t * sup)
+{
+ sup->scc_genscc.scc_rfcr = CPMFCR_GBL | CPMFCR_EB;
+ sup->scc_genscc.scc_tfcr = CPMFCR_GBL | CPMFCR_EB;
+}
+
+static inline void cpm_set_smc_fcr(volatile smc_uart_t * up)
+{
+ up->smc_rfcr = CPMFCR_GBL | CPMFCR_EB;
+ up->smc_tfcr = CPMFCR_GBL | CPMFCR_EB;
+}
+
+#define DPRAM_BASE ((unsigned char *)&cpm2_immr->im_dprambase[0])
+
+#endif
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
new file mode 100644
index 00000000000..3da5494953a
--- /dev/null
+++ b/drivers/serial/crisv10.c
@@ -0,0 +1,5059 @@
+/* $Id: serial.c,v 1.25 2004/09/29 10:33:49 starvik Exp $
+ *
+ * Serial port driver for the ETRAX 100LX chip
+ *
+ * Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003 Axis Communications AB
+ *
+ * Many, many authors. Based once upon a time on serial.c for 16x50.
+ *
+ * $Log: serial.c,v $
+ * Revision 1.25 2004/09/29 10:33:49 starvik
+ * Resolved a dealock when printing debug from kernel.
+ *
+ * Revision 1.24 2004/08/27 23:25:59 johana
+ * rs_set_termios() must call change_speed() if c_iflag has changed or
+ * automatic XOFF handling will be enabled and transmitter will stop
+ * if 0x13 is received.
+ *
+ * Revision 1.23 2004/08/24 06:57:13 starvik
+ * More whitespace cleanup
+ *
+ * Revision 1.22 2004/08/24 06:12:20 starvik
+ * Whitespace cleanup
+ *
+ * Revision 1.20 2004/05/24 12:00:20 starvik
+ * Big merge of stuff from Linux 2.4 (e.g. manual mode for the serial port).
+ *
+ * Revision 1.19 2004/05/17 13:12:15 starvik
+ * Kernel console hook
+ * Big merge from Linux 2.4 still pending.
+ *
+ * Revision 1.18 2003/10/28 07:18:30 starvik
+ * Compiles with debug info
+ *
+ * Revision 1.17 2003/07/04 08:27:37 starvik
+ * Merge of Linux 2.5.74
+ *
+ * Revision 1.16 2003/06/13 10:05:19 johana
+ * Help the user to avoid trouble by:
+ * Forcing mixed mode for status/control lines if not all pins are used.
+ *
+ * Revision 1.15 2003/06/13 09:43:01 johana
+ * Merged in the following changes from os/linux/arch/cris/drivers/serial.c
+ * + some minor changes to reduce diff.
+ *
+ * Revision 1.49 2003/05/30 11:31:54 johana
+ * Merged in change-branch--serial9bit that adds CMSPAR support for sticky
+ * parity (mark/space)
+ *
+ * Revision 1.48 2003/05/30 11:03:57 johana
+ * Implemented rs_send_xchar() by disabling the DMA and writing manually.
+ * Added e100_disable_txdma_channel() and e100_enable_txdma_channel().
+ * Fixed rs_throttle() and rs_unthrottle() to properly call rs_send_xchar
+ * instead of setting info->x_char and check the CRTSCTS flag before
+ * controlling the rts pin.
+ *
+ * Revision 1.14 2003/04/09 08:12:44 pkj
+ * Corrected typo changes made upstream.
+ *
+ * Revision 1.13 2003/04/09 05:20:47 starvik
+ * Merge of Linux 2.5.67
+ *
+ * Revision 1.11 2003/01/22 06:48:37 starvik
+ * Fixed warnings issued by GCC 3.2.1
+ *
+ * Revision 1.9 2002/12/13 09:07:47 starvik
+ * Alert user that RX_TIMEOUT_TICKS==0 doesn't work
+ *
+ * Revision 1.8 2002/12/11 13:13:57 starvik
+ * Added arch/ to v10 specific includes
+ * Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer)
+ *
+ * Revision 1.7 2002/12/06 07:13:57 starvik
+ * Corrected work queue stuff
+ * Removed CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST
+ *
+ * Revision 1.6 2002/11/21 07:17:46 starvik
+ * Change static inline to extern inline where otherwise outlined with gcc-3.2
+ *
+ * Revision 1.5 2002/11/14 15:59:49 starvik
+ * Linux 2.5 port of the latest serial driver from 2.4. The work queue stuff
+ * probably doesn't work yet.
+ *
+ * Revision 1.42 2002/11/05 09:08:47 johana
+ * Better implementation of rs_stop() and rs_start() that uses the XOFF
+ * register to start/stop transmission.
+ * change_speed() also initilises XOFF register correctly so that
+ * auto_xoff is enabled when IXON flag is set by user.
+ * This gives fast XOFF response times.
+ *
+ * Revision 1.41 2002/11/04 18:40:57 johana
+ * Implemented rs_stop() and rs_start().
+ * Simple tests using hwtestserial indicates that this should be enough
+ * to make it work.
+ *
+ * Revision 1.40 2002/10/14 05:33:18 starvik
+ * RS-485 uses fast timers even if SERIAL_FAST_TIMER is disabled
+ *
+ * Revision 1.39 2002/09/30 21:00:57 johana
+ * Support for CONFIG_ETRAX_SERx_DTR_RI_DSR_CD_MIXED where the status and
+ * control pins can be mixed between PA and PB.
+ * If no serial port uses MIXED old solution is used
+ * (saves a few bytes and cycles).
+ * control_pins struct uses masks instead of bit numbers.
+ * Corrected dummy values and polarity in line_info() so
+ * /proc/tty/driver/serial is now correct.
+ * (the E100_xxx_GET() macros is really active low - perhaps not obvious)
+ *
+ * Revision 1.38 2002/08/23 11:01:36 starvik
+ * Check that serial port is enabled in all interrupt handlers to avoid
+ * restarts of DMA channels not assigned to serial ports
+ *
+ * Revision 1.37 2002/08/13 13:02:37 bjornw
+ * Removed some warnings because of unused code
+ *
+ * Revision 1.36 2002/08/08 12:50:01 starvik
+ * Serial interrupt is shared with synchronous serial port driver
+ *
+ * Revision 1.35 2002/06/03 10:40:49 starvik
+ * Increased RS-485 RTS toggle timer to 2 characters
+ *
+ * Revision 1.34 2002/05/28 18:59:36 johana
+ * Whitespace and comment fixing to be more like etrax100ser.c 1.71.
+ *
+ * Revision 1.33 2002/05/28 17:55:43 johana
+ * RS-485 uses FAST_TIMER if enabled, and starts a short (one char time)
+ * timer from tranismit_chars (interrupt context).
+ * The timer toggles RTS in interrupt context when expired giving minimum
+ * latencies.
+ *
+ * Revision 1.32 2002/05/22 13:58:00 johana
+ * Renamed rs_write() to raw_write() and made it inline.
+ * New rs_write() handles RS-485 if configured and enabled
+ * (moved code from e100_write_rs485()).
+ * RS-485 ioctl's uses copy_from_user() instead of verify_area().
+ *
+ * Revision 1.31 2002/04/22 11:20:03 johana
+ * Updated copyright years.
+ *
+ * Revision 1.30 2002/04/22 09:39:12 johana
+ * RS-485 support compiles.
+ *
+ * Revision 1.29 2002/01/14 16:10:01 pkj
+ * Allocate the receive buffers dynamically. The static 4kB buffer was
+ * too small for the peaks. This means that we can get rid of the extra
+ * buffer and the copying to it. It also means we require less memory
+ * under normal operations, but can use more when needed (there is a
+ * cap at 64kB for safety reasons). If there is no memory available
+ * we panic(), and die a horrible death...
+ *
+ * Revision 1.28 2001/12/18 15:04:53 johana
+ * Cleaned up write_rs485() - now it works correctly without padding extra
+ * char.
+ * Added sane default initialisation of rs485.
+ * Added #ifdef around dummy variables.
+ *
+ * Revision 1.27 2001/11/29 17:00:41 pkj
+ * 2kB seems to be too small a buffer when using 921600 bps,
+ * so increase it to 4kB (this was already done for the elinux
+ * version of the serial driver).
+ *
+ * Revision 1.26 2001/11/19 14:20:41 pkj
+ * Minor changes to comments and unused code.
+ *
+ * Revision 1.25 2001/11/12 20:03:43 pkj
+ * Fixed compiler warnings.
+ *
+ * Revision 1.24 2001/11/12 15:10:05 pkj
+ * Total redesign of the receiving part of the serial driver.
+ * Uses eight chained descriptors to write to a 4kB buffer.
+ * This data is then serialised into a 2kB buffer. From there it
+ * is copied into the TTY's flip buffers when they become available.
+ * A lot of copying, and the sizes of the buffers might need to be
+ * tweaked, but all in all it should work better than the previous
+ * version, without the need to modify the TTY code in any way.
+ * Also note that erroneous bytes are now correctly marked in the
+ * flag buffers (instead of always marking the first byte).
+ *
+ * Revision 1.23 2001/10/30 17:53:26 pkj
+ * * Set info->uses_dma to 0 when a port is closed.
+ * * Mark the timer1 interrupt as a fast one (SA_INTERRUPT).
+ * * Call start_flush_timer() in start_receive() if
+ * CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST is defined.
+ *
+ * Revision 1.22 2001/10/30 17:44:03 pkj
+ * Use %lu for received and transmitted counters in line_info().
+ *
+ * Revision 1.21 2001/10/30 17:40:34 pkj
+ * Clean-up. The only change to functionality is that
+ * CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS(=5) is used instead of
+ * MAX_FLUSH_TIME(=8).
+ *
+ * Revision 1.20 2001/10/30 15:24:49 johana
+ * Added char_time stuff from 2.0 driver.
+ *
+ * Revision 1.19 2001/10/30 15:23:03 johana
+ * Merged with 1.13.2 branch + fixed indentation
+ * and changed CONFIG_ETRAX100_XYS to CONFIG_ETRAX_XYZ
+ *
+ * Revision 1.18 2001/09/24 09:27:22 pkj
+ * Completed ext_baud_table[] in cflag_to_baud() and cflag_to_etrax_baud().
+ *
+ * Revision 1.17 2001/08/24 11:32:49 ronny
+ * More fixes for the CONFIG_ETRAX_SERIAL_PORT0 define.
+ *
+ * Revision 1.16 2001/08/24 07:56:22 ronny
+ * Added config ifdefs around ser0 irq requests.
+ *
+ * Revision 1.15 2001/08/16 09:10:31 bjarne
+ * serial.c - corrected the initialization of rs_table, the wrong defines
+ * where used.
+ * Corrected a test in timed_flush_handler.
+ * Changed configured to enabled.
+ * serial.h - Changed configured to enabled.
+ *
+ * Revision 1.14 2001/08/15 07:31:23 bjarne
+ * Introduced two new members to the e100_serial struct.
+ * configured - Will be set to 1 if the port has been configured in .config
+ * uses_dma - Should be set to 1 if the port uses DMA. Currently it is set
+ * to 1
+ * when a port is opened. This is used to limit the DMA interrupt
+ * routines to only manipulate DMA channels actually used by the
+ * serial driver.
+ *
+ * Revision 1.13.2.2 2001/10/17 13:57:13 starvik
+ * Receiver was broken by the break fixes
+ *
+ * Revision 1.13.2.1 2001/07/20 13:57:39 ronny
+ * Merge with new stuff from etrax100ser.c. Works but haven't checked stuff
+ * like break handling.
+ *
+ * Revision 1.13 2001/05/09 12:40:31 johana
+ * Use DMA_NBR and IRQ_NBR defines from dma.h and irq.h
+ *
+ * Revision 1.12 2001/04/19 12:23:07 bjornw
+ * CONFIG_RS485 -> CONFIG_ETRAX_RS485
+ *
+ * Revision 1.11 2001/04/05 14:29:48 markusl
+ * Updated according to review remarks i.e.
+ * -Use correct types in port structure to avoid compiler warnings
+ * -Try to use IO_* macros whenever possible
+ * -Open should never return -EBUSY
+ *
+ * Revision 1.10 2001/03/05 13:14:07 bjornw
+ * Another spelling fix
+ *
+ * Revision 1.9 2001/02/23 13:46:38 bjornw
+ * Spellling check
+ *
+ * Revision 1.8 2001/01/23 14:56:35 markusl
+ * Made use of ser1 optional
+ * Needed by USB
+ *
+ * Revision 1.7 2001/01/19 16:14:48 perf
+ * Added kernel options for serial ports 234.
+ * Changed option names from CONFIG_ETRAX100_XYZ to CONFIG_ETRAX_XYZ.
+ *
+ * Revision 1.6 2000/11/22 16:36:09 bjornw
+ * Please marketing by using the correct case when spelling Etrax.
+ *
+ * Revision 1.5 2000/11/21 16:43:37 bjornw
+ * Fixed so it compiles under CONFIG_SVINTO_SIM
+ *
+ * Revision 1.4 2000/11/15 17:34:12 bjornw
+ * Added a timeout timer for flushing input channels. The interrupt-based
+ * fast flush system should be easy to merge with this later (works the same
+ * way, only with an irq instead of a system timer_list)
+ *
+ * Revision 1.3 2000/11/13 17:19:57 bjornw
+ * * Incredibly, this almost complete rewrite of serial.c worked (at least
+ * for output) the first time.
+ *
+ * Items worth noticing:
+ *
+ * No Etrax100 port 1 workarounds (does only compile on 2.4 anyway now)
+ * RS485 is not ported (why can't it be done in userspace as on x86 ?)
+ * Statistics done through async_icount - if any more stats are needed,
+ * that's the place to put them or in an arch-dep version of it.
+ * timeout_interrupt and the other fast timeout stuff not ported yet
+ * There be dragons in this 3k+ line driver
+ *
+ * Revision 1.2 2000/11/10 16:50:28 bjornw
+ * First shot at a 2.4 port, does not compile totally yet
+ *
+ * Revision 1.1 2000/11/10 16:47:32 bjornw
+ * Added verbatim copy of rev 1.49 etrax100ser.c from elinux
+ *
+ * Revision 1.49 2000/10/30 15:47:14 tobiasa
+ * Changed version number.
+ *
+ * Revision 1.48 2000/10/25 11:02:43 johana
+ * Changed %ul to %lu in printf's
+ *
+ * Revision 1.47 2000/10/18 15:06:53 pkj
+ * Compile correctly with CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST and
+ * CONFIG_ETRAX_SERIAL_PROC_ENTRY together.
+ * Some clean-up of the /proc/serial file.
+ *
+ * Revision 1.46 2000/10/16 12:59:40 johana
+ * Added CONFIG_ETRAX_SERIAL_PROC_ENTRY for statistics and debug info.
+ *
+ * Revision 1.45 2000/10/13 17:10:59 pkj
+ * Do not flush DMAs while flipping TTY buffers.
+ *
+ * Revision 1.44 2000/10/13 16:34:29 pkj
+ * Added a delay in ser_interrupt() for 2.3ms when an error is detected.
+ * We do not know why this delay is required yet, but without it the
+ * irmaflash program does not work (this was the program that needed
+ * the ser_interrupt() to be needed in the first place). This should not
+ * affect normal use of the serial ports.
+ *
+ * Revision 1.43 2000/10/13 16:30:44 pkj
+ * New version of the fast flush of serial buffers code. This time
+ * it is localized to the serial driver and uses a fast timer to
+ * do the work.
+ *
+ * Revision 1.42 2000/10/13 14:54:26 bennyo
+ * Fix for switching RTS when using rs485
+ *
+ * Revision 1.41 2000/10/12 11:43:44 pkj
+ * Cleaned up a number of comments.
+ *
+ * Revision 1.40 2000/10/10 11:58:39 johana
+ * Made RS485 support generic for all ports.
+ * Toggle rts in interrupt if no delay wanted.
+ * WARNING: No true transmitter empty check??
+ * Set d_wait bit when sending data so interrupt is delayed until
+ * fifo flushed. (Fix tcdrain() problem)
+ *
+ * Revision 1.39 2000/10/04 16:08:02 bjornw
+ * * Use virt_to_phys etc. for DMA addresses
+ * * Removed CONFIG_FLUSH_DMA_FAST hacks
+ * * Indentation fix
+ *
+ * Revision 1.38 2000/10/02 12:27:10 mattias
+ * * added variable used when using fast flush on serial dma.
+ * (CONFIG_FLUSH_DMA_FAST)
+ *
+ * Revision 1.37 2000/09/27 09:44:24 pkj
+ * Uncomment definition of SERIAL_HANDLE_EARLY_ERRORS.
+ *
+ * Revision 1.36 2000/09/20 13:12:52 johana
+ * Support for CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS:
+ * Number of timer ticks between flush of receive fifo (1 tick = 10ms).
+ * Try 0-3 for low latency applications. Approx 5 for high load
+ * applications (e.g. PPP). Maybe this should be more adaptive some day...
+ *
+ * Revision 1.35 2000/09/20 10:36:08 johana
+ * Typo in get_lsr_info()
+ *
+ * Revision 1.34 2000/09/20 10:29:59 johana
+ * Let rs_chars_in_buffer() check fifo content as well.
+ * get_lsr_info() might work now (not tested).
+ * Easier to change the port to debug.
+ *
+ * Revision 1.33 2000/09/13 07:52:11 torbjore
+ * Support RS485
+ *
+ * Revision 1.32 2000/08/31 14:45:37 bjornw
+ * After sending a break we need to reset the transmit DMA channel
+ *
+ * Revision 1.31 2000/06/21 12:13:29 johana
+ * Fixed wait for all chars sent when closing port.
+ * (Used to always take 1 second!)
+ * Added shadows for directions of status/ctrl signals.
+ *
+ * Revision 1.30 2000/05/29 16:27:55 bjornw
+ * Simulator ifdef moved a bit
+ *
+ * Revision 1.29 2000/05/09 09:40:30 mattias
+ * * Added description of dma registers used in timeout_interrupt
+ * * Removed old code
+ *
+ * Revision 1.28 2000/05/08 16:38:58 mattias
+ * * Bugfix for flushing fifo in timeout_interrupt
+ * Problem occurs when bluetooth stack waits for a small number of bytes
+ * containing an event acknowledging free buffers in bluetooth HW
+ * As before, data was stuck in fifo until more data came on uart and
+ * flushed it up to the stack.
+ *
+ * Revision 1.27 2000/05/02 09:52:28 jonasd
+ * Added fix for peculiar etrax behaviour when eop is forced on an empty
+ * fifo. This is used when flashing the IRMA chip. Disabled by default.
+ *
+ * Revision 1.26 2000/03/29 15:32:02 bjornw
+ * 2.0.34 updates
+ *
+ * Revision 1.25 2000/02/16 16:59:36 bjornw
+ * * Receive DMA directly into the flip-buffer, eliminating an intermediary
+ * receive buffer and a memcpy. Will avoid some overruns.
+ * * Error message on debug port if an overrun or flip buffer overrun occurs.
+ * * Just use the first byte in the flag flip buffer for errors.
+ * * Check for timeout on the serial ports only each 5/100 s, not 1/100.
+ *
+ * Revision 1.24 2000/02/09 18:02:28 bjornw
+ * * Clear serial errors (overrun, framing, parity) correctly. Before, the
+ * receiver would get stuck if an error occurred and we did not restart
+ * the input DMA.
+ * * Cosmetics (indentation, some code made into inlines)
+ * * Some more debug options
+ * * Actually shut down the serial port (DMA irq, DMA reset, receiver stop)
+ * when the last open is closed. Corresponding fixes in startup().
+ * * rs_close() "tx FIFO wait" code moved into right place, bug & -> && fixed
+ * and make a special case out of port 1 (R_DMA_CHx_STATUS is broken for that)
+ * * e100_disable_rx/enable_rx just disables/enables the receiver, not RTS
+ *
+ * Revision 1.23 2000/01/24 17:46:19 johana
+ * Wait for flush of DMA/FIFO when closing port.
+ *
+ * Revision 1.22 2000/01/20 18:10:23 johana
+ * Added TIOCMGET ioctl to return modem status.
+ * Implemented modem status/control that works with the extra signals
+ * (DTR, DSR, RI,CD) as well.
+ * 3 different modes supported:
+ * ser0 on PB (Bundy), ser1 on PB (Lisa) and ser2 on PA (Bundy)
+ * Fixed DEF_TX value that caused the serial transmitter pin (txd) to go to 0 when
+ * closing the last filehandle, NASTY!.
+ * Added break generation, not tested though!
+ * Use SA_SHIRQ when request_irq() for ser2 and ser3 (shared with) par0 and par1.
+ * You can't use them at the same time (yet..), but you can hopefully switch
+ * between ser2/par0, ser3/par1 with the same kernel config.
+ * Replaced some magic constants with defines
+ *
+ *
+ */
+
+static char *serial_version = "$Revision: 1.25 $";
+
+#include <linux/config.h>
+#include <linux/version.h>
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <linux/kernel.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/segment.h>
+#include <asm/bitops.h>
+#include <linux/delay.h>
+
+#include <asm/arch/svinto.h>
+
+/* non-arch dependent serial structures are in linux/serial.h */
+#include <linux/serial.h>
+/* while we keep our own stuff (struct e100_serial) in a local .h file */
+#include "serial.h"
+#include <asm/fasttimer.h>
+
+#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
+#ifndef CONFIG_ETRAX_FAST_TIMER
+#error "Enable FAST_TIMER to use SERIAL_FAST_TIMER"
+#endif
+#endif
+
+#if defined(CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS) && \
+ (CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS == 0)
+#error "RX_TIMEOUT_TICKS == 0 not allowed, use 1"
+#endif
+
+#if defined(CONFIG_ETRAX_RS485_ON_PA) && defined(CONFIG_ETRAX_RS485_ON_PORT_G)
+#error "Disable either CONFIG_ETRAX_RS485_ON_PA or CONFIG_ETRAX_RS485_ON_PORT_G"
+#endif
+
+/*
+ * All of the compatibilty code so we can compile serial.c against
+ * older kernels is hidden in serial_compat.h
+ */
+#if defined(LOCAL_HEADERS)
+#include "serial_compat.h"
+#endif
+
+#define _INLINE_ inline
+
+struct tty_driver *serial_driver;
+
+/* serial subtype definitions */
+#ifndef SERIAL_TYPE_NORMAL
+#define SERIAL_TYPE_NORMAL 1
+#endif
+
+/* number of characters left in xmit buffer before we ask for more */
+#define WAKEUP_CHARS 256
+
+//#define SERIAL_DEBUG_INTR
+//#define SERIAL_DEBUG_OPEN
+//#define SERIAL_DEBUG_FLOW
+//#define SERIAL_DEBUG_DATA
+//#define SERIAL_DEBUG_THROTTLE
+//#define SERIAL_DEBUG_IO /* Debug for Extra control and status pins */
+//#define SERIAL_DEBUG_LINE 0 /* What serport we want to debug */
+
+/* Enable this to use serial interrupts to handle when you
+ expect the first received event on the serial port to
+ be an error, break or similar. Used to be able to flash IRMA
+ from eLinux */
+#define SERIAL_HANDLE_EARLY_ERRORS
+
+/* Defined and used in n_tty.c, but we need it here as well */
+#define TTY_THRESHOLD_THROTTLE 128
+
+/* Due to buffersizes and threshold values, our SERIAL_DESCR_BUF_SIZE
+ * must not be to high or flow control won't work if we leave it to the tty
+ * layer so we have our own throttling in flush_to_flip
+ * TTY_FLIPBUF_SIZE=512,
+ * TTY_THRESHOLD_THROTTLE/UNTHROTTLE=128
+ * BUF_SIZE can't be > 128
+ */
+/* Currently 16 descriptors x 128 bytes = 2048 bytes */
+#define SERIAL_DESCR_BUF_SIZE 256
+
+#define SERIAL_PRESCALE_BASE 3125000 /* 3.125MHz */
+#define DEF_BAUD_BASE SERIAL_PRESCALE_BASE
+
+/* We don't want to load the system with massive fast timer interrupt
+ * on high baudrates so limit it to 250 us (4kHz) */
+#define MIN_FLUSH_TIME_USEC 250
+
+/* Add an x here to log a lot of timer stuff */
+#define TIMERD(x)
+/* Debug details of interrupt handling */
+#define DINTR1(x) /* irq on/off, errors */
+#define DINTR2(x) /* tx and rx */
+/* Debug flip buffer stuff */
+#define DFLIP(x)
+/* Debug flow control and overview of data flow */
+#define DFLOW(x)
+#define DBAUD(x)
+#define DLOG_INT_TRIG(x)
+
+//#define DEBUG_LOG_INCLUDED
+#ifndef DEBUG_LOG_INCLUDED
+#define DEBUG_LOG(line, string, value)
+#else
+struct debug_log_info
+{
+ unsigned long time;
+ unsigned long timer_data;
+// int line;
+ const char *string;
+ int value;
+};
+#define DEBUG_LOG_SIZE 4096
+
+struct debug_log_info debug_log[DEBUG_LOG_SIZE];
+int debug_log_pos = 0;
+
+#define DEBUG_LOG(_line, _string, _value) do { \
+ if ((_line) == SERIAL_DEBUG_LINE) {\
+ debug_log_func(_line, _string, _value); \
+ }\
+}while(0)
+
+void debug_log_func(int line, const char *string, int value)
+{
+ if (debug_log_pos < DEBUG_LOG_SIZE) {
+ debug_log[debug_log_pos].time = jiffies;
+ debug_log[debug_log_pos].timer_data = *R_TIMER_DATA;
+// debug_log[debug_log_pos].line = line;
+ debug_log[debug_log_pos].string = string;
+ debug_log[debug_log_pos].value = value;
+ debug_log_pos++;
+ }
+ /*printk(string, value);*/
+}
+#endif
+
+#ifndef CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS
+/* Default number of timer ticks before flushing rx fifo
+ * When using "little data, low latency applications: use 0
+ * When using "much data applications (PPP)" use ~5
+ */
+#define CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS 5
+#endif
+
+unsigned long timer_data_to_ns(unsigned long timer_data);
+
+static void change_speed(struct e100_serial *info);
+static void rs_throttle(struct tty_struct * tty);
+static void rs_wait_until_sent(struct tty_struct *tty, int timeout);
+static int rs_write(struct tty_struct * tty, int from_user,
+ const unsigned char *buf, int count);
+extern _INLINE_ int rs_raw_write(struct tty_struct * tty, int from_user,
+ const unsigned char *buf, int count);
+#ifdef CONFIG_ETRAX_RS485
+static int e100_write_rs485(struct tty_struct * tty, int from_user,
+ const unsigned char *buf, int count);
+#endif
+static int get_lsr_info(struct e100_serial * info, unsigned int *value);
+
+
+#define DEF_BAUD 115200 /* 115.2 kbit/s */
+#define STD_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define DEF_RX 0x20 /* or SERIAL_CTRL_W >> 8 */
+/* Default value of tx_ctrl register: has txd(bit 7)=1 (idle) as default */
+#define DEF_TX 0x80 /* or SERIAL_CTRL_B */
+
+/* offsets from R_SERIALx_CTRL */
+
+#define REG_DATA 0
+#define REG_DATA_STATUS32 0 /* this is the 32 bit register R_SERIALx_READ */
+#define REG_TR_DATA 0
+#define REG_STATUS 1
+#define REG_TR_CTRL 1
+#define REG_REC_CTRL 2
+#define REG_BAUD 3
+#define REG_XOFF 4 /* this is a 32 bit register */
+
+/* The bitfields are the same for all serial ports */
+#define SER_RXD_MASK IO_MASK(R_SERIAL0_STATUS, rxd)
+#define SER_DATA_AVAIL_MASK IO_MASK(R_SERIAL0_STATUS, data_avail)
+#define SER_FRAMING_ERR_MASK IO_MASK(R_SERIAL0_STATUS, framing_err)
+#define SER_PAR_ERR_MASK IO_MASK(R_SERIAL0_STATUS, par_err)
+#define SER_OVERRUN_MASK IO_MASK(R_SERIAL0_STATUS, overrun)
+
+#define SER_ERROR_MASK (SER_OVERRUN_MASK | SER_PAR_ERR_MASK | SER_FRAMING_ERR_MASK)
+
+/* Values for info->errorcode */
+#define ERRCODE_SET_BREAK (TTY_BREAK)
+#define ERRCODE_INSERT 0x100
+#define ERRCODE_INSERT_BREAK (ERRCODE_INSERT | TTY_BREAK)
+
+#define FORCE_EOP(info) *R_SET_EOP = 1U << info->iseteop;
+
+/*
+ * General note regarding the use of IO_* macros in this file:
+ *
+ * We will use the bits defined for DMA channel 6 when using various
+ * IO_* macros (e.g. IO_STATE, IO_MASK, IO_EXTRACT) and _assume_ they are
+ * the same for all channels (which of course they are).
+ *
+ * We will also use the bits defined for serial port 0 when writing commands
+ * to the different ports, as these bits too are the same for all ports.
+ */
+
+
+/* Mask for the irqs possibly enabled in R_IRQ_MASK1_RD etc. */
+static const unsigned long e100_ser_int_mask = 0
+#ifdef CONFIG_ETRAX_SERIAL_PORT0
+| IO_MASK(R_IRQ_MASK1_RD, ser0_data) | IO_MASK(R_IRQ_MASK1_RD, ser0_ready)
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT1
+| IO_MASK(R_IRQ_MASK1_RD, ser1_data) | IO_MASK(R_IRQ_MASK1_RD, ser1_ready)
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT2
+| IO_MASK(R_IRQ_MASK1_RD, ser2_data) | IO_MASK(R_IRQ_MASK1_RD, ser2_ready)
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT3
+| IO_MASK(R_IRQ_MASK1_RD, ser3_data) | IO_MASK(R_IRQ_MASK1_RD, ser3_ready)
+#endif
+;
+unsigned long r_alt_ser_baudrate_shadow = 0;
+
+/* this is the data for the four serial ports in the etrax100 */
+/* DMA2(ser2), DMA4(ser3), DMA6(ser0) or DMA8(ser1) */
+/* R_DMA_CHx_CLR_INTR, R_DMA_CHx_FIRST, R_DMA_CHx_CMD */
+
+static struct e100_serial rs_table[] = {
+ { .baud = DEF_BAUD,
+ .port = (unsigned char *)R_SERIAL0_CTRL,
+ .irq = 1U << 12, /* uses DMA 6 and 7 */
+ .oclrintradr = R_DMA_CH6_CLR_INTR,
+ .ofirstadr = R_DMA_CH6_FIRST,
+ .ocmdadr = R_DMA_CH6_CMD,
+ .ostatusadr = R_DMA_CH6_STATUS,
+ .iclrintradr = R_DMA_CH7_CLR_INTR,
+ .ifirstadr = R_DMA_CH7_FIRST,
+ .icmdadr = R_DMA_CH7_CMD,
+ .idescradr = R_DMA_CH7_DESCR,
+ .flags = STD_FLAGS,
+ .rx_ctrl = DEF_RX,
+ .tx_ctrl = DEF_TX,
+ .iseteop = 2,
+#ifdef CONFIG_ETRAX_SERIAL_PORT0
+ .enabled = 1,
+#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT
+ .dma_out_enabled = 1,
+#else
+ .dma_out_enabled = 0,
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN
+ .dma_in_enabled = 1,
+#else
+ .dma_in_enabled = 0
+#endif
+#else
+ .enabled = 0,
+ .dma_out_enabled = 0,
+ .dma_in_enabled = 0
+#endif
+
+}, /* ttyS0 */
+#ifndef CONFIG_SVINTO_SIM
+ { .baud = DEF_BAUD,
+ .port = (unsigned char *)R_SERIAL1_CTRL,
+ .irq = 1U << 16, /* uses DMA 8 and 9 */
+ .oclrintradr = R_DMA_CH8_CLR_INTR,
+ .ofirstadr = R_DMA_CH8_FIRST,
+ .ocmdadr = R_DMA_CH8_CMD,
+ .ostatusadr = R_DMA_CH8_STATUS,
+ .iclrintradr = R_DMA_CH9_CLR_INTR,
+ .ifirstadr = R_DMA_CH9_FIRST,
+ .icmdadr = R_DMA_CH9_CMD,
+ .idescradr = R_DMA_CH9_DESCR,
+ .flags = STD_FLAGS,
+ .rx_ctrl = DEF_RX,
+ .tx_ctrl = DEF_TX,
+ .iseteop = 3,
+#ifdef CONFIG_ETRAX_SERIAL_PORT1
+ .enabled = 1,
+#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT
+ .dma_out_enabled = 1,
+#else
+ .dma_out_enabled = 0,
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN
+ .dma_in_enabled = 1,
+#else
+ .dma_in_enabled = 0
+#endif
+#else
+ .enabled = 0,
+ .dma_out_enabled = 0,
+ .dma_in_enabled = 0
+#endif
+}, /* ttyS1 */
+
+ { .baud = DEF_BAUD,
+ .port = (unsigned char *)R_SERIAL2_CTRL,
+ .irq = 1U << 4, /* uses DMA 2 and 3 */
+ .oclrintradr = R_DMA_CH2_CLR_INTR,
+ .ofirstadr = R_DMA_CH2_FIRST,
+ .ocmdadr = R_DMA_CH2_CMD,
+ .ostatusadr = R_DMA_CH2_STATUS,
+ .iclrintradr = R_DMA_CH3_CLR_INTR,
+ .ifirstadr = R_DMA_CH3_FIRST,
+ .icmdadr = R_DMA_CH3_CMD,
+ .idescradr = R_DMA_CH3_DESCR,
+ .flags = STD_FLAGS,
+ .rx_ctrl = DEF_RX,
+ .tx_ctrl = DEF_TX,
+ .iseteop = 0,
+#ifdef CONFIG_ETRAX_SERIAL_PORT2
+ .enabled = 1,
+#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT
+ .dma_out_enabled = 1,
+#else
+ .dma_out_enabled = 0,
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN
+ .dma_in_enabled = 1,
+#else
+ .dma_in_enabled = 0
+#endif
+#else
+ .enabled = 0,
+ .dma_out_enabled = 0,
+ .dma_in_enabled = 0
+#endif
+ }, /* ttyS2 */
+
+ { .baud = DEF_BAUD,
+ .port = (unsigned char *)R_SERIAL3_CTRL,
+ .irq = 1U << 8, /* uses DMA 4 and 5 */
+ .oclrintradr = R_DMA_CH4_CLR_INTR,
+ .ofirstadr = R_DMA_CH4_FIRST,
+ .ocmdadr = R_DMA_CH4_CMD,
+ .ostatusadr = R_DMA_CH4_STATUS,
+ .iclrintradr = R_DMA_CH5_CLR_INTR,
+ .ifirstadr = R_DMA_CH5_FIRST,
+ .icmdadr = R_DMA_CH5_CMD,
+ .idescradr = R_DMA_CH5_DESCR,
+ .flags = STD_FLAGS,
+ .rx_ctrl = DEF_RX,
+ .tx_ctrl = DEF_TX,
+ .iseteop = 1,
+#ifdef CONFIG_ETRAX_SERIAL_PORT3
+ .enabled = 1,
+#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT
+ .dma_out_enabled = 1,
+#else
+ .dma_out_enabled = 0,
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN
+ .dma_in_enabled = 1,
+#else
+ .dma_in_enabled = 0
+#endif
+#else
+ .enabled = 0,
+ .dma_out_enabled = 0,
+ .dma_in_enabled = 0
+#endif
+ } /* ttyS3 */
+#endif
+};
+
+
+#define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial))
+
+static struct termios *serial_termios[NR_PORTS];
+static struct termios *serial_termios_locked[NR_PORTS];
+#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
+static struct fast_timer fast_timers[NR_PORTS];
+#endif
+
+#ifdef CONFIG_ETRAX_SERIAL_PROC_ENTRY
+#define PROCSTAT(x) x
+struct ser_statistics_type {
+ int overrun_cnt;
+ int early_errors_cnt;
+ int ser_ints_ok_cnt;
+ int errors_cnt;
+ unsigned long int processing_flip;
+ unsigned long processing_flip_still_room;
+ unsigned long int timeout_flush_cnt;
+ int rx_dma_ints;
+ int tx_dma_ints;
+ int rx_tot;
+ int tx_tot;
+};
+
+static struct ser_statistics_type ser_stat[NR_PORTS];
+
+#else
+
+#define PROCSTAT(x)
+
+#endif /* CONFIG_ETRAX_SERIAL_PROC_ENTRY */
+
+/* RS-485 */
+#if defined(CONFIG_ETRAX_RS485)
+#ifdef CONFIG_ETRAX_FAST_TIMER
+static struct fast_timer fast_timers_rs485[NR_PORTS];
+#endif
+#if defined(CONFIG_ETRAX_RS485_ON_PA)
+static int rs485_pa_bit = CONFIG_ETRAX_RS485_ON_PA_BIT;
+#endif
+#if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
+static int rs485_port_g_bit = CONFIG_ETRAX_RS485_ON_PORT_G_BIT;
+#endif
+#endif
+
+/* Info and macros needed for each ports extra control/status signals. */
+#define E100_STRUCT_PORT(line, pinname) \
+ ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \
+ (R_PORT_PA_DATA): ( \
+ (CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT >= 0)? \
+ (R_PORT_PB_DATA):&dummy_ser[line]))
+
+#define E100_STRUCT_SHADOW(line, pinname) \
+ ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \
+ (&port_pa_data_shadow): ( \
+ (CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT >= 0)? \
+ (&port_pb_data_shadow):&dummy_ser[line]))
+#define E100_STRUCT_MASK(line, pinname) \
+ ((CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT >= 0)? \
+ (1<<CONFIG_ETRAX_SER##line##_##pinname##_ON_PA_BIT): ( \
+ (CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT >= 0)? \
+ (1<<CONFIG_ETRAX_SER##line##_##pinname##_ON_PB_BIT):DUMMY_##pinname##_MASK))
+
+#define DUMMY_DTR_MASK 1
+#define DUMMY_RI_MASK 2
+#define DUMMY_DSR_MASK 4
+#define DUMMY_CD_MASK 8
+static unsigned char dummy_ser[NR_PORTS] = {0xFF, 0xFF, 0xFF,0xFF};
+
+/* If not all status pins are used or disabled, use mixed mode */
+#ifdef CONFIG_ETRAX_SERIAL_PORT0
+
+#define SER0_PA_BITSUM (CONFIG_ETRAX_SER0_DTR_ON_PA_BIT+CONFIG_ETRAX_SER0_RI_ON_PA_BIT+CONFIG_ETRAX_SER0_DSR_ON_PA_BIT+CONFIG_ETRAX_SER0_CD_ON_PA_BIT)
+
+#if SER0_PA_BITSUM != -4
+# if CONFIG_ETRAX_SER0_DTR_ON_PA_BIT == -1
+# ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+# if CONFIG_ETRAX_SER0_RI_ON_PA_BIT == -1
+# ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+# if CONFIG_ETRAX_SER0_DSR_ON_PA_BIT == -1
+# ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+# if CONFIG_ETRAX_SER0_CD_ON_PA_BIT == -1
+# ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+#endif
+
+#define SER0_PB_BITSUM (CONFIG_ETRAX_SER0_DTR_ON_PB_BIT+CONFIG_ETRAX_SER0_RI_ON_PB_BIT+CONFIG_ETRAX_SER0_DSR_ON_PB_BIT+CONFIG_ETRAX_SER0_CD_ON_PB_BIT)
+
+#if SER0_PB_BITSUM != -4
+# if CONFIG_ETRAX_SER0_DTR_ON_PB_BIT == -1
+# ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+# if CONFIG_ETRAX_SER0_RI_ON_PB_BIT == -1
+# ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+# if CONFIG_ETRAX_SER0_DSR_ON_PB_BIT == -1
+# ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+# if CONFIG_ETRAX_SER0_CD_ON_PB_BIT == -1
+# ifndef CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+#endif
+
+#endif /* PORT0 */
+
+
+#ifdef CONFIG_ETRAX_SERIAL_PORT1
+
+#define SER1_PA_BITSUM (CONFIG_ETRAX_SER1_DTR_ON_PA_BIT+CONFIG_ETRAX_SER1_RI_ON_PA_BIT+CONFIG_ETRAX_SER1_DSR_ON_PA_BIT+CONFIG_ETRAX_SER1_CD_ON_PA_BIT)
+
+#if SER1_PA_BITSUM != -4
+# if CONFIG_ETRAX_SER1_DTR_ON_PA_BIT == -1
+# ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+# if CONFIG_ETRAX_SER1_RI_ON_PA_BIT == -1
+# ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+# if CONFIG_ETRAX_SER1_DSR_ON_PA_BIT == -1
+# ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+# if CONFIG_ETRAX_SER1_CD_ON_PA_BIT == -1
+# ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+#endif
+
+#define SER1_PB_BITSUM (CONFIG_ETRAX_SER1_DTR_ON_PB_BIT+CONFIG_ETRAX_SER1_RI_ON_PB_BIT+CONFIG_ETRAX_SER1_DSR_ON_PB_BIT+CONFIG_ETRAX_SER1_CD_ON_PB_BIT)
+
+#if SER1_PB_BITSUM != -4
+# if CONFIG_ETRAX_SER1_DTR_ON_PB_BIT == -1
+# ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+# if CONFIG_ETRAX_SER1_RI_ON_PB_BIT == -1
+# ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+# if CONFIG_ETRAX_SER1_DSR_ON_PB_BIT == -1
+# ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+# if CONFIG_ETRAX_SER1_CD_ON_PB_BIT == -1
+# ifndef CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+#endif
+
+#endif /* PORT1 */
+
+#ifdef CONFIG_ETRAX_SERIAL_PORT2
+
+#define SER2_PA_BITSUM (CONFIG_ETRAX_SER2_DTR_ON_PA_BIT+CONFIG_ETRAX_SER2_RI_ON_PA_BIT+CONFIG_ETRAX_SER2_DSR_ON_PA_BIT+CONFIG_ETRAX_SER2_CD_ON_PA_BIT)
+
+#if SER2_PA_BITSUM != -4
+# if CONFIG_ETRAX_SER2_DTR_ON_PA_BIT == -1
+# ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+# if CONFIG_ETRAX_SER2_RI_ON_PA_BIT == -1
+# ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+# if CONFIG_ETRAX_SER2_DSR_ON_PA_BIT == -1
+# ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+# if CONFIG_ETRAX_SER2_CD_ON_PA_BIT == -1
+# ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+#endif
+
+#define SER2_PB_BITSUM (CONFIG_ETRAX_SER2_DTR_ON_PB_BIT+CONFIG_ETRAX_SER2_RI_ON_PB_BIT+CONFIG_ETRAX_SER2_DSR_ON_PB_BIT+CONFIG_ETRAX_SER2_CD_ON_PB_BIT)
+
+#if SER2_PB_BITSUM != -4
+# if CONFIG_ETRAX_SER2_DTR_ON_PB_BIT == -1
+# ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+# if CONFIG_ETRAX_SER2_RI_ON_PB_BIT == -1
+# ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+# if CONFIG_ETRAX_SER2_DSR_ON_PB_BIT == -1
+# ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+# if CONFIG_ETRAX_SER2_CD_ON_PB_BIT == -1
+# ifndef CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+#endif
+
+#endif /* PORT2 */
+
+#ifdef CONFIG_ETRAX_SERIAL_PORT3
+
+#define SER3_PA_BITSUM (CONFIG_ETRAX_SER3_DTR_ON_PA_BIT+CONFIG_ETRAX_SER3_RI_ON_PA_BIT+CONFIG_ETRAX_SER3_DSR_ON_PA_BIT+CONFIG_ETRAX_SER3_CD_ON_PA_BIT)
+
+#if SER3_PA_BITSUM != -4
+# if CONFIG_ETRAX_SER3_DTR_ON_PA_BIT == -1
+# ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+# if CONFIG_ETRAX_SER3_RI_ON_PA_BIT == -1
+# ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+# if CONFIG_ETRAX_SER3_DSR_ON_PA_BIT == -1
+# ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+# if CONFIG_ETRAX_SER3_CD_ON_PA_BIT == -1
+# ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+#endif
+
+#define SER3_PB_BITSUM (CONFIG_ETRAX_SER3_DTR_ON_PB_BIT+CONFIG_ETRAX_SER3_RI_ON_PB_BIT+CONFIG_ETRAX_SER3_DSR_ON_PB_BIT+CONFIG_ETRAX_SER3_CD_ON_PB_BIT)
+
+#if SER3_PB_BITSUM != -4
+# if CONFIG_ETRAX_SER3_DTR_ON_PB_BIT == -1
+# ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+# if CONFIG_ETRAX_SER3_RI_ON_PB_BIT == -1
+# ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+# if CONFIG_ETRAX_SER3_DSR_ON_PB_BIT == -1
+# ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+# if CONFIG_ETRAX_SER3_CD_ON_PB_BIT == -1
+# ifndef CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED
+# define CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED 1
+# endif
+# endif
+#endif
+
+#endif /* PORT3 */
+
+
+#if defined(CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_MIXED) || \
+ defined(CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED) || \
+ defined(CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED) || \
+ defined(CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED)
+#define CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED
+#endif
+
+#ifdef CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED
+/* The pins can be mixed on PA and PB */
+#define CONTROL_PINS_PORT_NOT_USED(line) \
+ &dummy_ser[line], &dummy_ser[line], \
+ &dummy_ser[line], &dummy_ser[line], \
+ &dummy_ser[line], &dummy_ser[line], \
+ &dummy_ser[line], &dummy_ser[line], \
+ DUMMY_DTR_MASK, DUMMY_RI_MASK, DUMMY_DSR_MASK, DUMMY_CD_MASK
+
+
+struct control_pins
+{
+ volatile unsigned char *dtr_port;
+ unsigned char *dtr_shadow;
+ volatile unsigned char *ri_port;
+ unsigned char *ri_shadow;
+ volatile unsigned char *dsr_port;
+ unsigned char *dsr_shadow;
+ volatile unsigned char *cd_port;
+ unsigned char *cd_shadow;
+
+ unsigned char dtr_mask;
+ unsigned char ri_mask;
+ unsigned char dsr_mask;
+ unsigned char cd_mask;
+};
+
+static const struct control_pins e100_modem_pins[NR_PORTS] =
+{
+ /* Ser 0 */
+ {
+#ifdef CONFIG_ETRAX_SERIAL_PORT0
+ E100_STRUCT_PORT(0,DTR), E100_STRUCT_SHADOW(0,DTR),
+ E100_STRUCT_PORT(0,RI), E100_STRUCT_SHADOW(0,RI),
+ E100_STRUCT_PORT(0,DSR), E100_STRUCT_SHADOW(0,DSR),
+ E100_STRUCT_PORT(0,CD), E100_STRUCT_SHADOW(0,CD),
+ E100_STRUCT_MASK(0,DTR),
+ E100_STRUCT_MASK(0,RI),
+ E100_STRUCT_MASK(0,DSR),
+ E100_STRUCT_MASK(0,CD)
+#else
+ CONTROL_PINS_PORT_NOT_USED(0)
+#endif
+ },
+
+ /* Ser 1 */
+ {
+#ifdef CONFIG_ETRAX_SERIAL_PORT1
+ E100_STRUCT_PORT(1,DTR), E100_STRUCT_SHADOW(1,DTR),
+ E100_STRUCT_PORT(1,RI), E100_STRUCT_SHADOW(1,RI),
+ E100_STRUCT_PORT(1,DSR), E100_STRUCT_SHADOW(1,DSR),
+ E100_STRUCT_PORT(1,CD), E100_STRUCT_SHADOW(1,CD),
+ E100_STRUCT_MASK(1,DTR),
+ E100_STRUCT_MASK(1,RI),
+ E100_STRUCT_MASK(1,DSR),
+ E100_STRUCT_MASK(1,CD)
+#else
+ CONTROL_PINS_PORT_NOT_USED(1)
+#endif
+ },
+
+ /* Ser 2 */
+ {
+#ifdef CONFIG_ETRAX_SERIAL_PORT2
+ E100_STRUCT_PORT(2,DTR), E100_STRUCT_SHADOW(2,DTR),
+ E100_STRUCT_PORT(2,RI), E100_STRUCT_SHADOW(2,RI),
+ E100_STRUCT_PORT(2,DSR), E100_STRUCT_SHADOW(2,DSR),
+ E100_STRUCT_PORT(2,CD), E100_STRUCT_SHADOW(2,CD),
+ E100_STRUCT_MASK(2,DTR),
+ E100_STRUCT_MASK(2,RI),
+ E100_STRUCT_MASK(2,DSR),
+ E100_STRUCT_MASK(2,CD)
+#else
+ CONTROL_PINS_PORT_NOT_USED(2)
+#endif
+ },
+
+ /* Ser 3 */
+ {
+#ifdef CONFIG_ETRAX_SERIAL_PORT3
+ E100_STRUCT_PORT(3,DTR), E100_STRUCT_SHADOW(3,DTR),
+ E100_STRUCT_PORT(3,RI), E100_STRUCT_SHADOW(3,RI),
+ E100_STRUCT_PORT(3,DSR), E100_STRUCT_SHADOW(3,DSR),
+ E100_STRUCT_PORT(3,CD), E100_STRUCT_SHADOW(3,CD),
+ E100_STRUCT_MASK(3,DTR),
+ E100_STRUCT_MASK(3,RI),
+ E100_STRUCT_MASK(3,DSR),
+ E100_STRUCT_MASK(3,CD)
+#else
+ CONTROL_PINS_PORT_NOT_USED(3)
+#endif
+ }
+};
+#else /* CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED */
+
+/* All pins are on either PA or PB for each serial port */
+#define CONTROL_PINS_PORT_NOT_USED(line) \
+ &dummy_ser[line], &dummy_ser[line], \
+ DUMMY_DTR_MASK, DUMMY_RI_MASK, DUMMY_DSR_MASK, DUMMY_CD_MASK
+
+
+struct control_pins
+{
+ volatile unsigned char *port;
+ unsigned char *shadow;
+
+ unsigned char dtr_mask;
+ unsigned char ri_mask;
+ unsigned char dsr_mask;
+ unsigned char cd_mask;
+};
+
+#define dtr_port port
+#define dtr_shadow shadow
+#define ri_port port
+#define ri_shadow shadow
+#define dsr_port port
+#define dsr_shadow shadow
+#define cd_port port
+#define cd_shadow shadow
+
+static const struct control_pins e100_modem_pins[NR_PORTS] =
+{
+ /* Ser 0 */
+ {
+#ifdef CONFIG_ETRAX_SERIAL_PORT0
+ E100_STRUCT_PORT(0,DTR), E100_STRUCT_SHADOW(0,DTR),
+ E100_STRUCT_MASK(0,DTR),
+ E100_STRUCT_MASK(0,RI),
+ E100_STRUCT_MASK(0,DSR),
+ E100_STRUCT_MASK(0,CD)
+#else
+ CONTROL_PINS_PORT_NOT_USED(0)
+#endif
+ },
+
+ /* Ser 1 */
+ {
+#ifdef CONFIG_ETRAX_SERIAL_PORT1
+ E100_STRUCT_PORT(1,DTR), E100_STRUCT_SHADOW(1,DTR),
+ E100_STRUCT_MASK(1,DTR),
+ E100_STRUCT_MASK(1,RI),
+ E100_STRUCT_MASK(1,DSR),
+ E100_STRUCT_MASK(1,CD)
+#else
+ CONTROL_PINS_PORT_NOT_USED(1)
+#endif
+ },
+
+ /* Ser 2 */
+ {
+#ifdef CONFIG_ETRAX_SERIAL_PORT2
+ E100_STRUCT_PORT(2,DTR), E100_STRUCT_SHADOW(2,DTR),
+ E100_STRUCT_MASK(2,DTR),
+ E100_STRUCT_MASK(2,RI),
+ E100_STRUCT_MASK(2,DSR),
+ E100_STRUCT_MASK(2,CD)
+#else
+ CONTROL_PINS_PORT_NOT_USED(2)
+#endif
+ },
+
+ /* Ser 3 */
+ {
+#ifdef CONFIG_ETRAX_SERIAL_PORT3
+ E100_STRUCT_PORT(3,DTR), E100_STRUCT_SHADOW(3,DTR),
+ E100_STRUCT_MASK(3,DTR),
+ E100_STRUCT_MASK(3,RI),
+ E100_STRUCT_MASK(3,DSR),
+ E100_STRUCT_MASK(3,CD)
+#else
+ CONTROL_PINS_PORT_NOT_USED(3)
+#endif
+ }
+};
+#endif /* !CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED */
+
+#define E100_RTS_MASK 0x20
+#define E100_CTS_MASK 0x40
+
+/* All serial port signals are active low:
+ * active = 0 -> 3.3V to RS-232 driver -> -12V on RS-232 level
+ * inactive = 1 -> 0V to RS-232 driver -> +12V on RS-232 level
+ *
+ * These macros returns the pin value: 0=0V, >=1 = 3.3V on ETRAX chip
+ */
+
+/* Output */
+#define E100_RTS_GET(info) ((info)->rx_ctrl & E100_RTS_MASK)
+/* Input */
+#define E100_CTS_GET(info) ((info)->port[REG_STATUS] & E100_CTS_MASK)
+
+/* These are typically PA or PB and 0 means 0V, 1 means 3.3V */
+/* Is an output */
+#define E100_DTR_GET(info) ((*e100_modem_pins[(info)->line].dtr_shadow) & e100_modem_pins[(info)->line].dtr_mask)
+
+/* Normally inputs */
+#define E100_RI_GET(info) ((*e100_modem_pins[(info)->line].ri_port) & e100_modem_pins[(info)->line].ri_mask)
+#define E100_CD_GET(info) ((*e100_modem_pins[(info)->line].cd_port) & e100_modem_pins[(info)->line].cd_mask)
+
+/* Input */
+#define E100_DSR_GET(info) ((*e100_modem_pins[(info)->line].dsr_port) & e100_modem_pins[(info)->line].dsr_mask)
+
+
+/*
+ * tmp_buf is used as a temporary buffer by serial_write. We need to
+ * lock it in case the memcpy_fromfs blocks while swapping in a page,
+ * and some other program tries to do a serial write at the same time.
+ * Since the lock will only come under contention when the system is
+ * swapping and available memory is low, it makes sense to share one
+ * buffer across all the serial ports, since it significantly saves
+ * memory if large numbers of serial ports are open.
+ */
+static unsigned char *tmp_buf;
+#ifdef DECLARE_MUTEX
+static DECLARE_MUTEX(tmp_buf_sem);
+#else
+static struct semaphore tmp_buf_sem = MUTEX;
+#endif
+
+/* Calculate the chartime depending on baudrate, numbor of bits etc. */
+static void update_char_time(struct e100_serial * info)
+{
+ tcflag_t cflags = info->tty->termios->c_cflag;
+ int bits;
+
+ /* calc. number of bits / data byte */
+ /* databits + startbit and 1 stopbit */
+ if ((cflags & CSIZE) == CS7)
+ bits = 9;
+ else
+ bits = 10;
+
+ if (cflags & CSTOPB) /* 2 stopbits ? */
+ bits++;
+
+ if (cflags & PARENB) /* parity bit ? */
+ bits++;
+
+ /* calc timeout */
+ info->char_time_usec = ((bits * 1000000) / info->baud) + 1;
+ info->flush_time_usec = 4*info->char_time_usec;
+ if (info->flush_time_usec < MIN_FLUSH_TIME_USEC)
+ info->flush_time_usec = MIN_FLUSH_TIME_USEC;
+
+}
+
+/*
+ * This function maps from the Bxxxx defines in asm/termbits.h into real
+ * baud rates.
+ */
+
+static int
+cflag_to_baud(unsigned int cflag)
+{
+ static int baud_table[] = {
+ 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400,
+ 4800, 9600, 19200, 38400 };
+
+ static int ext_baud_table[] = {
+ 0, 57600, 115200, 230400, 460800, 921600, 1843200, 6250000,
+ 0, 0, 0, 0, 0, 0, 0, 0 };
+
+ if (cflag & CBAUDEX)
+ return ext_baud_table[(cflag & CBAUD) & ~CBAUDEX];
+ else
+ return baud_table[cflag & CBAUD];
+}
+
+/* and this maps to an etrax100 hardware baud constant */
+
+static unsigned char
+cflag_to_etrax_baud(unsigned int cflag)
+{
+ char retval;
+
+ static char baud_table[] = {
+ -1, -1, -1, -1, -1, -1, -1, 0, 1, 2, -1, 3, 4, 5, 6, 7 };
+
+ static char ext_baud_table[] = {
+ -1, 8, 9, 10, 11, 12, 13, 14, -1, -1, -1, -1, -1, -1, -1, -1 };
+
+ if (cflag & CBAUDEX)
+ retval = ext_baud_table[(cflag & CBAUD) & ~CBAUDEX];
+ else
+ retval = baud_table[cflag & CBAUD];
+
+ if (retval < 0) {
+ printk(KERN_WARNING "serdriver tried setting invalid baud rate, flags %x.\n", cflag);
+ retval = 5; /* choose default 9600 instead */
+ }
+
+ return retval | (retval << 4); /* choose same for both TX and RX */
+}
+
+
+/* Various static support functions */
+
+/* Functions to set or clear DTR/RTS on the requested line */
+/* It is complicated by the fact that RTS is a serial port register, while
+ * DTR might not be implemented in the HW at all, and if it is, it can be on
+ * any general port.
+ */
+
+
+static inline void
+e100_dtr(struct e100_serial *info, int set)
+{
+#ifndef CONFIG_SVINTO_SIM
+ unsigned char mask = e100_modem_pins[info->line].dtr_mask;
+
+#ifdef SERIAL_DEBUG_IO
+ printk("ser%i dtr %i mask: 0x%02X\n", info->line, set, mask);
+ printk("ser%i shadow before 0x%02X get: %i\n",
+ info->line, *e100_modem_pins[info->line].dtr_shadow,
+ E100_DTR_GET(info));
+#endif
+ /* DTR is active low */
+ {
+ unsigned long flags;
+
+ save_flags(flags);
+ cli();
+ *e100_modem_pins[info->line].dtr_shadow &= ~mask;
+ *e100_modem_pins[info->line].dtr_shadow |= (set ? 0 : mask);
+ *e100_modem_pins[info->line].dtr_port = *e100_modem_pins[info->line].dtr_shadow;
+ restore_flags(flags);
+ }
+
+#ifdef SERIAL_DEBUG_IO
+ printk("ser%i shadow after 0x%02X get: %i\n",
+ info->line, *e100_modem_pins[info->line].dtr_shadow,
+ E100_DTR_GET(info));
+#endif
+#endif
+}
+
+/* set = 0 means 3.3V on the pin, bitvalue: 0=active, 1=inactive
+ * 0=0V , 1=3.3V
+ */
+static inline void
+e100_rts(struct e100_serial *info, int set)
+{
+#ifndef CONFIG_SVINTO_SIM
+ unsigned long flags;
+ save_flags(flags);
+ cli();
+ info->rx_ctrl &= ~E100_RTS_MASK;
+ info->rx_ctrl |= (set ? 0 : E100_RTS_MASK); /* RTS is active low */
+ info->port[REG_REC_CTRL] = info->rx_ctrl;
+ restore_flags(flags);
+#ifdef SERIAL_DEBUG_IO
+ printk("ser%i rts %i\n", info->line, set);
+#endif
+#endif
+}
+
+
+/* If this behaves as a modem, RI and CD is an output */
+static inline void
+e100_ri_out(struct e100_serial *info, int set)
+{
+#ifndef CONFIG_SVINTO_SIM
+ /* RI is active low */
+ {
+ unsigned char mask = e100_modem_pins[info->line].ri_mask;
+ unsigned long flags;
+
+ save_flags(flags);
+ cli();
+ *e100_modem_pins[info->line].ri_shadow &= ~mask;
+ *e100_modem_pins[info->line].ri_shadow |= (set ? 0 : mask);
+ *e100_modem_pins[info->line].ri_port = *e100_modem_pins[info->line].ri_shadow;
+ restore_flags(flags);
+ }
+#endif
+}
+static inline void
+e100_cd_out(struct e100_serial *info, int set)
+{
+#ifndef CONFIG_SVINTO_SIM
+ /* CD is active low */
+ {
+ unsigned char mask = e100_modem_pins[info->line].cd_mask;
+ unsigned long flags;
+
+ save_flags(flags);
+ cli();
+ *e100_modem_pins[info->line].cd_shadow &= ~mask;
+ *e100_modem_pins[info->line].cd_shadow |= (set ? 0 : mask);
+ *e100_modem_pins[info->line].cd_port = *e100_modem_pins[info->line].cd_shadow;
+ restore_flags(flags);
+ }
+#endif
+}
+
+static inline void
+e100_disable_rx(struct e100_serial *info)
+{
+#ifndef CONFIG_SVINTO_SIM
+ /* disable the receiver */
+ info->port[REG_REC_CTRL] =
+ (info->rx_ctrl &= ~IO_MASK(R_SERIAL0_REC_CTRL, rec_enable));
+#endif
+}
+
+static inline void
+e100_enable_rx(struct e100_serial *info)
+{
+#ifndef CONFIG_SVINTO_SIM
+ /* enable the receiver */
+ info->port[REG_REC_CTRL] =
+ (info->rx_ctrl |= IO_MASK(R_SERIAL0_REC_CTRL, rec_enable));
+#endif
+}
+
+/* the rx DMA uses both the dma_descr and the dma_eop interrupts */
+
+static inline void
+e100_disable_rxdma_irq(struct e100_serial *info)
+{
+#ifdef SERIAL_DEBUG_INTR
+ printk("rxdma_irq(%d): 0\n",info->line);
+#endif
+ DINTR1(DEBUG_LOG(info->line,"IRQ disable_rxdma_irq %i\n", info->line));
+ *R_IRQ_MASK2_CLR = (info->irq << 2) | (info->irq << 3);
+}
+
+static inline void
+e100_enable_rxdma_irq(struct e100_serial *info)
+{
+#ifdef SERIAL_DEBUG_INTR
+ printk("rxdma_irq(%d): 1\n",info->line);
+#endif
+ DINTR1(DEBUG_LOG(info->line,"IRQ enable_rxdma_irq %i\n", info->line));
+ *R_IRQ_MASK2_SET = (info->irq << 2) | (info->irq << 3);
+}
+
+/* the tx DMA uses only dma_descr interrupt */
+
+static _INLINE_ void
+e100_disable_txdma_irq(struct e100_serial *info)
+{
+#ifdef SERIAL_DEBUG_INTR
+ printk("txdma_irq(%d): 0\n",info->line);
+#endif
+ DINTR1(DEBUG_LOG(info->line,"IRQ disable_txdma_irq %i\n", info->line));
+ *R_IRQ_MASK2_CLR = info->irq;
+}
+
+static _INLINE_ void
+e100_enable_txdma_irq(struct e100_serial *info)
+{
+#ifdef SERIAL_DEBUG_INTR
+ printk("txdma_irq(%d): 1\n",info->line);
+#endif
+ DINTR1(DEBUG_LOG(info->line,"IRQ enable_txdma_irq %i\n", info->line));
+ *R_IRQ_MASK2_SET = info->irq;
+}
+
+static _INLINE_ void
+e100_disable_txdma_channel(struct e100_serial *info)
+{
+ unsigned long flags;
+
+ /* Disable output DMA channel for the serial port in question
+ * ( set to something other then serialX)
+ */
+ save_flags(flags);
+ cli();
+ DFLOW(DEBUG_LOG(info->line, "disable_txdma_channel %i\n", info->line));
+ if (info->line == 0) {
+ if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma6)) ==
+ IO_STATE(R_GEN_CONFIG, dma6, serial0)) {
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma6);
+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma6, unused);
+ }
+ } else if (info->line == 1) {
+ if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma8)) ==
+ IO_STATE(R_GEN_CONFIG, dma8, serial1)) {
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma8);
+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma8, usb);
+ }
+ } else if (info->line == 2) {
+ if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma2)) ==
+ IO_STATE(R_GEN_CONFIG, dma2, serial2)) {
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma2);
+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma2, par0);
+ }
+ } else if (info->line == 3) {
+ if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma4)) ==
+ IO_STATE(R_GEN_CONFIG, dma4, serial3)) {
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma4);
+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, par1);
+ }
+ }
+ *R_GEN_CONFIG = genconfig_shadow;
+ restore_flags(flags);
+}
+
+
+static _INLINE_ void
+e100_enable_txdma_channel(struct e100_serial *info)
+{
+ unsigned long flags;
+
+ save_flags(flags);
+ cli();
+ DFLOW(DEBUG_LOG(info->line, "enable_txdma_channel %i\n", info->line));
+ /* Enable output DMA channel for the serial port in question */
+ if (info->line == 0) {
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma6);
+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma6, serial0);
+ } else if (info->line == 1) {
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma8);
+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma8, serial1);
+ } else if (info->line == 2) {
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma2);
+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma2, serial2);
+ } else if (info->line == 3) {
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma4);
+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, serial3);
+ }
+ *R_GEN_CONFIG = genconfig_shadow;
+ restore_flags(flags);
+}
+
+static _INLINE_ void
+e100_disable_rxdma_channel(struct e100_serial *info)
+{
+ unsigned long flags;
+
+ /* Disable input DMA channel for the serial port in question
+ * ( set to something other then serialX)
+ */
+ save_flags(flags);
+ cli();
+ if (info->line == 0) {
+ if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma7)) ==
+ IO_STATE(R_GEN_CONFIG, dma7, serial0)) {
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma7);
+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma7, unused);
+ }
+ } else if (info->line == 1) {
+ if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma9)) ==
+ IO_STATE(R_GEN_CONFIG, dma9, serial1)) {
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma9);
+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma9, usb);
+ }
+ } else if (info->line == 2) {
+ if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma3)) ==
+ IO_STATE(R_GEN_CONFIG, dma3, serial2)) {
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma3);
+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma3, par0);
+ }
+ } else if (info->line == 3) {
+ if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma5)) ==
+ IO_STATE(R_GEN_CONFIG, dma5, serial3)) {
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma5);
+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, par1);
+ }
+ }
+ *R_GEN_CONFIG = genconfig_shadow;
+ restore_flags(flags);
+}
+
+
+static _INLINE_ void
+e100_enable_rxdma_channel(struct e100_serial *info)
+{
+ unsigned long flags;
+
+ save_flags(flags);
+ cli();
+ /* Enable input DMA channel for the serial port in question */
+ if (info->line == 0) {
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma7);
+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma7, serial0);
+ } else if (info->line == 1) {
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma9);
+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma9, serial1);
+ } else if (info->line == 2) {
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma3);
+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma3, serial2);
+ } else if (info->line == 3) {
+ genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma5);
+ genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, serial3);
+ }
+ *R_GEN_CONFIG = genconfig_shadow;
+ restore_flags(flags);
+}
+
+#ifdef SERIAL_HANDLE_EARLY_ERRORS
+/* in order to detect and fix errors on the first byte
+ we have to use the serial interrupts as well. */
+
+static inline void
+e100_disable_serial_data_irq(struct e100_serial *info)
+{
+#ifdef SERIAL_DEBUG_INTR
+ printk("ser_irq(%d): 0\n",info->line);
+#endif
+ DINTR1(DEBUG_LOG(info->line,"IRQ disable data_irq %i\n", info->line));
+ *R_IRQ_MASK1_CLR = (1U << (8+2*info->line));
+}
+
+static inline void
+e100_enable_serial_data_irq(struct e100_serial *info)
+{
+#ifdef SERIAL_DEBUG_INTR
+ printk("ser_irq(%d): 1\n",info->line);
+ printk("**** %d = %d\n",
+ (8+2*info->line),
+ (1U << (8+2*info->line)));
+#endif
+ DINTR1(DEBUG_LOG(info->line,"IRQ enable data_irq %i\n", info->line));
+ *R_IRQ_MASK1_SET = (1U << (8+2*info->line));
+}
+#endif
+
+static inline void
+e100_disable_serial_tx_ready_irq(struct e100_serial *info)
+{
+#ifdef SERIAL_DEBUG_INTR
+ printk("ser_tx_irq(%d): 0\n",info->line);
+#endif
+ DINTR1(DEBUG_LOG(info->line,"IRQ disable ready_irq %i\n", info->line));
+ *R_IRQ_MASK1_CLR = (1U << (8+1+2*info->line));
+}
+
+static inline void
+e100_enable_serial_tx_ready_irq(struct e100_serial *info)
+{
+#ifdef SERIAL_DEBUG_INTR
+ printk("ser_tx_irq(%d): 1\n",info->line);
+ printk("**** %d = %d\n",
+ (8+1+2*info->line),
+ (1U << (8+1+2*info->line)));
+#endif
+ DINTR2(DEBUG_LOG(info->line,"IRQ enable ready_irq %i\n", info->line));
+ *R_IRQ_MASK1_SET = (1U << (8+1+2*info->line));
+}
+
+static inline void e100_enable_rx_irq(struct e100_serial *info)
+{
+ if (info->uses_dma_in)
+ e100_enable_rxdma_irq(info);
+ else
+ e100_enable_serial_data_irq(info);
+}
+static inline void e100_disable_rx_irq(struct e100_serial *info)
+{
+ if (info->uses_dma_in)
+ e100_disable_rxdma_irq(info);
+ else
+ e100_disable_serial_data_irq(info);
+}
+
+#if defined(CONFIG_ETRAX_RS485)
+/* Enable RS-485 mode on selected port. This is UGLY. */
+static int
+e100_enable_rs485(struct tty_struct *tty,struct rs485_control *r)
+{
+ struct e100_serial * info = (struct e100_serial *)tty->driver_data;
+
+#if defined(CONFIG_ETRAX_RS485_ON_PA)
+ *R_PORT_PA_DATA = port_pa_data_shadow |= (1 << rs485_pa_bit);
+#endif
+#if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
+ REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
+ rs485_port_g_bit, 1);
+#endif
+#if defined(CONFIG_ETRAX_RS485_LTC1387)
+ REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
+ CONFIG_ETRAX_RS485_LTC1387_DXEN_PORT_G_BIT, 1);
+ REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
+ CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 1);
+#endif
+
+ info->rs485.rts_on_send = 0x01 & r->rts_on_send;
+ info->rs485.rts_after_sent = 0x01 & r->rts_after_sent;
+ if (r->delay_rts_before_send >= 1000)
+ info->rs485.delay_rts_before_send = 1000;
+ else
+ info->rs485.delay_rts_before_send = r->delay_rts_before_send;
+ info->rs485.enabled = r->enabled;
+/* printk("rts: on send = %i, after = %i, enabled = %i",
+ info->rs485.rts_on_send,
+ info->rs485.rts_after_sent,
+ info->rs485.enabled
+ );
+*/
+ return 0;
+}
+
+static int
+e100_write_rs485(struct tty_struct *tty, int from_user,
+ const unsigned char *buf, int count)
+{
+ struct e100_serial * info = (struct e100_serial *)tty->driver_data;
+ int old_enabled = info->rs485.enabled;
+
+ /* rs485 is always implicitly enabled if we're using the ioctl()
+ * but it doesn't have to be set in the rs485_control
+ * (to be backward compatible with old apps)
+ * So we store, set and restore it.
+ */
+ info->rs485.enabled = 1;
+ /* rs_write now deals with RS485 if enabled */
+ count = rs_write(tty, from_user, buf, count);
+ info->rs485.enabled = old_enabled;
+ return count;
+}
+
+#ifdef CONFIG_ETRAX_FAST_TIMER
+/* Timer function to toggle RTS when using FAST_TIMER */
+static void rs485_toggle_rts_timer_function(unsigned long data)
+{
+ struct e100_serial *info = (struct e100_serial *)data;
+
+ fast_timers_rs485[info->line].function = NULL;
+ e100_rts(info, info->rs485.rts_after_sent);
+#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER)
+ e100_enable_rx(info);
+ e100_enable_rx_irq(info);
+#endif
+}
+#endif
+#endif /* CONFIG_ETRAX_RS485 */
+
+/*
+ * ------------------------------------------------------------
+ * rs_stop() and rs_start()
+ *
+ * This routines are called before setting or resetting tty->stopped.
+ * They enable or disable transmitter using the XOFF registers, as necessary.
+ * ------------------------------------------------------------
+ */
+
+static void
+rs_stop(struct tty_struct *tty)
+{
+ struct e100_serial *info = (struct e100_serial *)tty->driver_data;
+ if (info) {
+ unsigned long flags;
+ unsigned long xoff;
+
+ save_flags(flags); cli();
+ DFLOW(DEBUG_LOG(info->line, "XOFF rs_stop xmit %i\n",
+ CIRC_CNT(info->xmit.head,
+ info->xmit.tail,SERIAL_XMIT_SIZE)));
+
+ xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(info->tty));
+ xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, stop);
+ if (tty->termios->c_iflag & IXON ) {
+ xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
+ }
+
+ *((unsigned long *)&info->port[REG_XOFF]) = xoff;
+ restore_flags(flags);
+ }
+}
+
+static void
+rs_start(struct tty_struct *tty)
+{
+ struct e100_serial *info = (struct e100_serial *)tty->driver_data;
+ if (info) {
+ unsigned long flags;
+ unsigned long xoff;
+
+ save_flags(flags); cli();
+ DFLOW(DEBUG_LOG(info->line, "XOFF rs_start xmit %i\n",
+ CIRC_CNT(info->xmit.head,
+ info->xmit.tail,SERIAL_XMIT_SIZE)));
+ xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(tty));
+ xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable);
+ if (tty->termios->c_iflag & IXON ) {
+ xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
+ }
+
+ *((unsigned long *)&info->port[REG_XOFF]) = xoff;
+ if (!info->uses_dma_out &&
+ info->xmit.head != info->xmit.tail && info->xmit.buf)
+ e100_enable_serial_tx_ready_irq(info);
+
+ restore_flags(flags);
+ }
+}
+
+/*
+ * ----------------------------------------------------------------------
+ *
+ * Here starts the interrupt handling routines. All of the following
+ * subroutines are declared as inline and are folded into
+ * rs_interrupt(). They were separated out for readability's sake.
+ *
+ * Note: rs_interrupt() is a "fast" interrupt, which means that it
+ * runs with interrupts turned off. People who may want to modify
+ * rs_interrupt() should try to keep the interrupt handler as fast as
+ * possible. After you are done making modifications, it is not a bad
+ * idea to do:
+ *
+ * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c
+ *
+ * and look at the resulting assemble code in serial.s.
+ *
+ * - Ted Ts'o (tytso@mit.edu), 7-Mar-93
+ * -----------------------------------------------------------------------
+ */
+
+/*
+ * This routine is used by the interrupt handler to schedule
+ * processing in the software interrupt portion of the driver.
+ */
+static _INLINE_ void
+rs_sched_event(struct e100_serial *info,
+ int event)
+{
+ if (info->event & (1 << event))
+ return;
+ info->event |= 1 << event;
+ schedule_work(&info->work);
+}
+
+/* The output DMA channel is free - use it to send as many chars as possible
+ * NOTES:
+ * We don't pay attention to info->x_char, which means if the TTY wants to
+ * use XON/XOFF it will set info->x_char but we won't send any X char!
+ *
+ * To implement this, we'd just start a DMA send of 1 byte pointing at a
+ * buffer containing the X char, and skip updating xmit. We'd also have to
+ * check if the last sent char was the X char when we enter this function
+ * the next time, to avoid updating xmit with the sent X value.
+ */
+
+static void
+transmit_chars_dma(struct e100_serial *info)
+{
+ unsigned int c, sentl;
+ struct etrax_dma_descr *descr;
+
+#ifdef CONFIG_SVINTO_SIM
+ /* This will output too little if tail is not 0 always since
+ * we don't reloop to send the other part. Anyway this SHOULD be a
+ * no-op - transmit_chars_dma would never really be called during sim
+ * since rs_write does not write into the xmit buffer then.
+ */
+ if (info->xmit.tail)
+ printk("Error in serial.c:transmit_chars-dma(), tail!=0\n");
+ if (info->xmit.head != info->xmit.tail) {
+ SIMCOUT(info->xmit.buf + info->xmit.tail,
+ CIRC_CNT(info->xmit.head,
+ info->xmit.tail,
+ SERIAL_XMIT_SIZE));
+ info->xmit.head = info->xmit.tail; /* move back head */
+ info->tr_running = 0;
+ }
+ return;
+#endif
+ /* acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */
+ *info->oclrintradr =
+ IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) |
+ IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do);
+
+#ifdef SERIAL_DEBUG_INTR
+ if (info->line == SERIAL_DEBUG_LINE)
+ printk("tc\n");
+#endif
+ if (!info->tr_running) {
+ /* weirdo... we shouldn't get here! */
+ printk(KERN_WARNING "Achtung: transmit_chars_dma with !tr_running\n");
+ return;
+ }
+
+ descr = &info->tr_descr;
+
+ /* first get the amount of bytes sent during the last DMA transfer,
+ and update xmit accordingly */
+
+ /* if the stop bit was not set, all data has been sent */
+ if (!(descr->status & d_stop)) {
+ sentl = descr->sw_len;
+ } else
+ /* otherwise we find the amount of data sent here */
+ sentl = descr->hw_len;
+
+ DFLOW(DEBUG_LOG(info->line, "TX %i done\n", sentl));
+
+ /* update stats */
+ info->icount.tx += sentl;
+
+ /* update xmit buffer */
+ info->xmit.tail = (info->xmit.tail + sentl) & (SERIAL_XMIT_SIZE - 1);
+
+ /* if there is only a few chars left in the buf, wake up the blocked
+ write if any */
+ if (CIRC_CNT(info->xmit.head,
+ info->xmit.tail,
+ SERIAL_XMIT_SIZE) < WAKEUP_CHARS)
+ rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
+
+ /* find out the largest amount of consecutive bytes we want to send now */
+
+ c = CIRC_CNT_TO_END(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
+
+ /* Don't send all in one DMA transfer - divide it so we wake up
+ * application before all is sent
+ */
+
+ if (c >= 4*WAKEUP_CHARS)
+ c = c/2;
+
+ if (c <= 0) {
+ /* our job here is done, don't schedule any new DMA transfer */
+ info->tr_running = 0;
+
+#if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER)
+ if (info->rs485.enabled) {
+ /* Set a short timer to toggle RTS */
+ start_one_shot_timer(&fast_timers_rs485[info->line],
+ rs485_toggle_rts_timer_function,
+ (unsigned long)info,
+ info->char_time_usec*2,
+ "RS-485");
+ }
+#endif /* RS485 */
+ return;
+ }
+
+ /* ok we can schedule a dma send of c chars starting at info->xmit.tail */
+ /* set up the descriptor correctly for output */
+ DFLOW(DEBUG_LOG(info->line, "TX %i\n", c));
+ descr->ctrl = d_int | d_eol | d_wait; /* Wait needed for tty_wait_until_sent() */
+ descr->sw_len = c;
+ descr->buf = virt_to_phys(info->xmit.buf + info->xmit.tail);
+ descr->status = 0;
+
+ *info->ofirstadr = virt_to_phys(descr); /* write to R_DMAx_FIRST */
+ *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, start);
+
+ /* DMA is now running (hopefully) */
+} /* transmit_chars_dma */
+
+static void
+start_transmit(struct e100_serial *info)
+{
+#if 0
+ if (info->line == SERIAL_DEBUG_LINE)
+ printk("x\n");
+#endif
+
+ info->tr_descr.sw_len = 0;
+ info->tr_descr.hw_len = 0;
+ info->tr_descr.status = 0;
+ info->tr_running = 1;
+ if (info->uses_dma_out)
+ transmit_chars_dma(info);
+ else
+ e100_enable_serial_tx_ready_irq(info);
+} /* start_transmit */
+
+#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
+static int serial_fast_timer_started = 0;
+static int serial_fast_timer_expired = 0;
+static void flush_timeout_function(unsigned long data);
+#define START_FLUSH_FAST_TIMER_TIME(info, string, usec) {\
+ unsigned long timer_flags; \
+ save_flags(timer_flags); \
+ cli(); \
+ if (fast_timers[info->line].function == NULL) { \
+ serial_fast_timer_started++; \
+ TIMERD(DEBUG_LOG(info->line, "start_timer %i ", info->line)); \
+ TIMERD(DEBUG_LOG(info->line, "num started: %i\n", serial_fast_timer_started)); \
+ start_one_shot_timer(&fast_timers[info->line], \
+ flush_timeout_function, \
+ (unsigned long)info, \
+ (usec), \
+ string); \
+ } \
+ else { \
+ TIMERD(DEBUG_LOG(info->line, "timer %i already running\n", info->line)); \
+ } \
+ restore_flags(timer_flags); \
+}
+#define START_FLUSH_FAST_TIMER(info, string) START_FLUSH_FAST_TIMER_TIME(info, string, info->flush_time_usec)
+
+#else
+#define START_FLUSH_FAST_TIMER_TIME(info, string, usec)
+#define START_FLUSH_FAST_TIMER(info, string)
+#endif
+
+static struct etrax_recv_buffer *
+alloc_recv_buffer(unsigned int size)
+{
+ struct etrax_recv_buffer *buffer;
+
+ if (!(buffer = kmalloc(sizeof *buffer + size, GFP_ATOMIC)))
+ return NULL;
+
+ buffer->next = NULL;
+ buffer->length = 0;
+ buffer->error = TTY_NORMAL;
+
+ return buffer;
+}
+
+static void
+append_recv_buffer(struct e100_serial *info, struct etrax_recv_buffer *buffer)
+{
+ unsigned long flags;
+
+ save_flags(flags);
+ cli();
+
+ if (!info->first_recv_buffer)
+ info->first_recv_buffer = buffer;
+ else
+ info->last_recv_buffer->next = buffer;
+
+ info->last_recv_buffer = buffer;
+
+ info->recv_cnt += buffer->length;
+ if (info->recv_cnt > info->max_recv_cnt)
+ info->max_recv_cnt = info->recv_cnt;
+
+ restore_flags(flags);
+}
+
+static int
+add_char_and_flag(struct e100_serial *info, unsigned char data, unsigned char flag)
+{
+ struct etrax_recv_buffer *buffer;
+ if (info->uses_dma_in) {
+ if (!(buffer = alloc_recv_buffer(4)))
+ return 0;
+
+ buffer->length = 1;
+ buffer->error = flag;
+ buffer->buffer[0] = data;
+
+ append_recv_buffer(info, buffer);
+
+ info->icount.rx++;
+ } else {
+ struct tty_struct *tty = info->tty;
+ *tty->flip.char_buf_ptr = data;
+ *tty->flip.flag_buf_ptr = flag;
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ tty->flip.count++;
+ info->icount.rx++;
+ }
+
+ return 1;
+}
+
+extern _INLINE_ unsigned int
+handle_descr_data(struct e100_serial *info, struct etrax_dma_descr *descr, unsigned int recvl)
+{
+ struct etrax_recv_buffer *buffer = phys_to_virt(descr->buf) - sizeof *buffer;
+
+ if (info->recv_cnt + recvl > 65536) {
+ printk(KERN_CRIT
+ "%s: Too much pending incoming serial data! Dropping %u bytes.\n", __FUNCTION__, recvl);
+ return 0;
+ }
+
+ buffer->length = recvl;
+
+ if (info->errorcode == ERRCODE_SET_BREAK)
+ buffer->error = TTY_BREAK;
+ info->errorcode = 0;
+
+ append_recv_buffer(info, buffer);
+
+ if (!(buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE)))
+ panic("%s: Failed to allocate memory for receive buffer!\n", __FUNCTION__);
+
+ descr->buf = virt_to_phys(buffer->buffer);
+
+ return recvl;
+}
+
+static _INLINE_ unsigned int
+handle_all_descr_data(struct e100_serial *info)
+{
+ struct etrax_dma_descr *descr;
+ unsigned int recvl;
+ unsigned int ret = 0;
+
+ while (1)
+ {
+ descr = &info->rec_descr[info->cur_rec_descr];
+
+ if (descr == phys_to_virt(*info->idescradr))
+ break;
+
+ if (++info->cur_rec_descr == SERIAL_RECV_DESCRIPTORS)
+ info->cur_rec_descr = 0;
+
+ /* find out how many bytes were read */
+
+ /* if the eop bit was not set, all data has been received */
+ if (!(descr->status & d_eop)) {
+ recvl = descr->sw_len;
+ } else {
+ /* otherwise we find the amount of data received here */
+ recvl = descr->hw_len;
+ }
+
+ /* Reset the status information */
+ descr->status = 0;
+
+ DFLOW( DEBUG_LOG(info->line, "RX %lu\n", recvl);
+ if (info->tty->stopped) {
+ unsigned char *buf = phys_to_virt(descr->buf);
+ DEBUG_LOG(info->line, "rx 0x%02X\n", buf[0]);
+ DEBUG_LOG(info->line, "rx 0x%02X\n", buf[1]);
+ DEBUG_LOG(info->line, "rx 0x%02X\n", buf[2]);
+ }
+ );
+
+ /* update stats */
+ info->icount.rx += recvl;
+
+ ret += handle_descr_data(info, descr, recvl);
+ }
+
+ return ret;
+}
+
+static _INLINE_ void
+receive_chars_dma(struct e100_serial *info)
+{
+ struct tty_struct *tty;
+ unsigned char rstat;
+
+#ifdef CONFIG_SVINTO_SIM
+ /* No receive in the simulator. Will probably be when the rest of
+ * the serial interface works, and this piece will just be removed.
+ */
+ return;
+#endif
+
+ /* Acknowledge both dma_descr and dma_eop irq in R_DMA_CHx_CLR_INTR */
+ *info->iclrintradr =
+ IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) |
+ IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do);
+
+ tty = info->tty;
+ if (!tty) /* Something wrong... */
+ return;
+
+#ifdef SERIAL_HANDLE_EARLY_ERRORS
+ if (info->uses_dma_in)
+ e100_enable_serial_data_irq(info);
+#endif
+
+ if (info->errorcode == ERRCODE_INSERT_BREAK)
+ add_char_and_flag(info, '\0', TTY_BREAK);
+
+ handle_all_descr_data(info);
+
+ /* Read the status register to detect errors */
+ rstat = info->port[REG_STATUS];
+ if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) {
+ DFLOW(DEBUG_LOG(info->line, "XOFF detect stat %x\n", rstat));
+ }
+
+ if (rstat & SER_ERROR_MASK) {
+ /* If we got an error, we must reset it by reading the
+ * data_in field
+ */
+ unsigned char data = info->port[REG_DATA];
+
+ PROCSTAT(ser_stat[info->line].errors_cnt++);
+ DEBUG_LOG(info->line, "#dERR: s d 0x%04X\n",
+ ((rstat & SER_ERROR_MASK) << 8) | data);
+
+ if (rstat & SER_PAR_ERR_MASK)
+ add_char_and_flag(info, data, TTY_PARITY);
+ else if (rstat & SER_OVERRUN_MASK)
+ add_char_and_flag(info, data, TTY_OVERRUN);
+ else if (rstat & SER_FRAMING_ERR_MASK)
+ add_char_and_flag(info, data, TTY_FRAME);
+ }
+
+ START_FLUSH_FAST_TIMER(info, "receive_chars");
+
+ /* Restart the receiving DMA */
+ *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart);
+}
+
+static _INLINE_ int
+start_recv_dma(struct e100_serial *info)
+{
+ struct etrax_dma_descr *descr = info->rec_descr;
+ struct etrax_recv_buffer *buffer;
+ int i;
+
+ /* Set up the receiving descriptors */
+ for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) {
+ if (!(buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE)))
+ panic("%s: Failed to allocate memory for receive buffer!\n", __FUNCTION__);
+
+ descr[i].ctrl = d_int;
+ descr[i].buf = virt_to_phys(buffer->buffer);
+ descr[i].sw_len = SERIAL_DESCR_BUF_SIZE;
+ descr[i].hw_len = 0;
+ descr[i].status = 0;
+ descr[i].next = virt_to_phys(&descr[i+1]);
+ }
+
+ /* Link the last descriptor to the first */
+ descr[i-1].next = virt_to_phys(&descr[0]);
+
+ /* Start with the first descriptor in the list */
+ info->cur_rec_descr = 0;
+
+ /* Start the DMA */
+ *info->ifirstadr = virt_to_phys(&descr[info->cur_rec_descr]);
+ *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, start);
+
+ /* Input DMA should be running now */
+ return 1;
+}
+
+static void
+start_receive(struct e100_serial *info)
+{
+#ifdef CONFIG_SVINTO_SIM
+ /* No receive in the simulator. Will probably be when the rest of
+ * the serial interface works, and this piece will just be removed.
+ */
+ return;
+#endif
+ info->tty->flip.count = 0;
+ if (info->uses_dma_in) {
+ /* reset the input dma channel to be sure it works */
+
+ *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset);
+ while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->icmdadr) ==
+ IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset));
+
+ start_recv_dma(info);
+ }
+}
+
+
+static _INLINE_ void
+status_handle(struct e100_serial *info, unsigned short status)
+{
+}
+
+/* the bits in the MASK2 register are laid out like this:
+ DMAI_EOP DMAI_DESCR DMAO_EOP DMAO_DESCR
+ where I is the input channel and O is the output channel for the port.
+ info->irq is the bit number for the DMAO_DESCR so to check the others we
+ shift info->irq to the left.
+*/
+
+/* dma output channel interrupt handler
+ this interrupt is called from DMA2(ser2), DMA4(ser3), DMA6(ser0) or
+ DMA8(ser1) when they have finished a descriptor with the intr flag set.
+*/
+
+static irqreturn_t
+tr_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+{
+ struct e100_serial *info;
+ unsigned long ireg;
+ int i;
+ int handled = 0;
+
+#ifdef CONFIG_SVINTO_SIM
+ /* No receive in the simulator. Will probably be when the rest of
+ * the serial interface works, and this piece will just be removed.
+ */
+ {
+ const char *s = "What? tr_interrupt in simulator??\n";
+ SIMCOUT(s,strlen(s));
+ }
+ return IRQ_HANDLED;
+#endif
+
+ /* find out the line that caused this irq and get it from rs_table */
+
+ ireg = *R_IRQ_MASK2_RD; /* get the active irq bits for the dma channels */
+
+ for (i = 0; i < NR_PORTS; i++) {
+ info = rs_table + i;
+ if (!info->enabled || !info->uses_dma_out)
+ continue;
+ /* check for dma_descr (don't need to check for dma_eop in output dma for serial */
+ if (ireg & info->irq) {
+ handled = 1;
+ /* we can send a new dma bunch. make it so. */
+ DINTR2(DEBUG_LOG(info->line, "tr_interrupt %i\n", i));
+ /* Read jiffies_usec first,
+ * we want this time to be as late as possible
+ */
+ PROCSTAT(ser_stat[info->line].tx_dma_ints++);
+ info->last_tx_active_usec = GET_JIFFIES_USEC();
+ info->last_tx_active = jiffies;
+ transmit_chars_dma(info);
+ }
+
+ /* FIXME: here we should really check for a change in the
+ status lines and if so call status_handle(info) */
+ }
+ return IRQ_RETVAL(handled);
+} /* tr_interrupt */
+
+/* dma input channel interrupt handler */
+
+static irqreturn_t
+rec_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+{
+ struct e100_serial *info;
+ unsigned long ireg;
+ int i;
+ int handled = 0;
+
+#ifdef CONFIG_SVINTO_SIM
+ /* No receive in the simulator. Will probably be when the rest of
+ * the serial interface works, and this piece will just be removed.
+ */
+ {
+ const char *s = "What? rec_interrupt in simulator??\n";
+ SIMCOUT(s,strlen(s));
+ }
+ return IRQ_HANDLED;
+#endif
+
+ /* find out the line that caused this irq and get it from rs_table */
+
+ ireg = *R_IRQ_MASK2_RD; /* get the active irq bits for the dma channels */
+
+ for (i = 0; i < NR_PORTS; i++) {
+ info = rs_table + i;
+ if (!info->enabled || !info->uses_dma_in)
+ continue;
+ /* check for both dma_eop and dma_descr for the input dma channel */
+ if (ireg & ((info->irq << 2) | (info->irq << 3))) {
+ handled = 1;
+ /* we have received something */
+ receive_chars_dma(info);
+ }
+
+ /* FIXME: here we should really check for a change in the
+ status lines and if so call status_handle(info) */
+ }
+ return IRQ_RETVAL(handled);
+} /* rec_interrupt */
+
+static _INLINE_ int
+force_eop_if_needed(struct e100_serial *info)
+{
+ /* We check data_avail bit to determine if data has
+ * arrived since last time
+ */
+ unsigned char rstat = info->port[REG_STATUS];
+
+ /* error or datavail? */
+ if (rstat & SER_ERROR_MASK) {
+ /* Some error has occurred. If there has been valid data, an
+ * EOP interrupt will be made automatically. If no data, the
+ * normal ser_interrupt should be enabled and handle it.
+ * So do nothing!
+ */
+ DEBUG_LOG(info->line, "timeout err: rstat 0x%03X\n",
+ rstat | (info->line << 8));
+ return 0;
+ }
+
+ if (rstat & SER_DATA_AVAIL_MASK) {
+ /* Ok data, no error, count it */
+ TIMERD(DEBUG_LOG(info->line, "timeout: rstat 0x%03X\n",
+ rstat | (info->line << 8)));
+ /* Read data to clear status flags */
+ (void)info->port[REG_DATA];
+
+ info->forced_eop = 0;
+ START_FLUSH_FAST_TIMER(info, "magic");
+ return 0;
+ }
+
+ /* hit the timeout, force an EOP for the input
+ * dma channel if we haven't already
+ */
+ if (!info->forced_eop) {
+ info->forced_eop = 1;
+ PROCSTAT(ser_stat[info->line].timeout_flush_cnt++);
+ TIMERD(DEBUG_LOG(info->line, "timeout EOP %i\n", info->line));
+ FORCE_EOP(info);
+ }
+
+ return 1;
+}
+
+extern _INLINE_ void
+flush_to_flip_buffer(struct e100_serial *info)
+{
+ struct tty_struct *tty;
+ struct etrax_recv_buffer *buffer;
+ unsigned int length;
+ unsigned long flags;
+ int max_flip_size;
+
+ if (!info->first_recv_buffer)
+ return;
+
+ save_flags(flags);
+ cli();
+
+ if (!(tty = info->tty)) {
+ restore_flags(flags);
+ return;
+ }
+
+ length = tty->flip.count;
+ /* Don't flip more than the ldisc has room for.
+ * The return value from ldisc.receive_room(tty) - might not be up to
+ * date, the previous flip of up to TTY_FLIPBUF_SIZE might be on the
+ * processed and not accounted for yet.
+ * Since we use DMA, 1 SERIAL_DESCR_BUF_SIZE could be on the way.
+ * Lets buffer data here and let flow control take care of it.
+ * Since we normally flip large chunks, the ldisc don't react
+ * with throttle until too late if we flip to much.
+ */
+ max_flip_size = tty->ldisc.receive_room(tty);
+ if (max_flip_size < 0)
+ max_flip_size = 0;
+ if (max_flip_size <= (TTY_FLIPBUF_SIZE + /* Maybe not accounted for */
+ length + info->recv_cnt + /* We have this queued */
+ 2*SERIAL_DESCR_BUF_SIZE + /* This could be on the way */
+ TTY_THRESHOLD_THROTTLE)) { /* Some slack */
+ /* check TTY_THROTTLED first so it indicates our state */
+ if (!test_and_set_bit(TTY_THROTTLED, &tty->flags)) {
+ DFLOW(DEBUG_LOG(info->line,"flush_to_flip throttles room %lu\n", max_flip_size));
+ rs_throttle(tty);
+ }
+#if 0
+ else if (max_flip_size <= (TTY_FLIPBUF_SIZE + /* Maybe not accounted for */
+ length + info->recv_cnt + /* We have this queued */
+ SERIAL_DESCR_BUF_SIZE + /* This could be on the way */
+ TTY_THRESHOLD_THROTTLE)) { /* Some slack */
+ DFLOW(DEBUG_LOG(info->line,"flush_to_flip throttles again! %lu\n", max_flip_size));
+ rs_throttle(tty);
+ }
+#endif
+ }
+
+ if (max_flip_size > TTY_FLIPBUF_SIZE)
+ max_flip_size = TTY_FLIPBUF_SIZE;
+
+ while ((buffer = info->first_recv_buffer) && length < max_flip_size) {
+ unsigned int count = buffer->length;
+
+ if (length + count > max_flip_size)
+ count = max_flip_size - length;
+
+ memcpy(tty->flip.char_buf_ptr + length, buffer->buffer, count);
+ memset(tty->flip.flag_buf_ptr + length, TTY_NORMAL, count);
+ tty->flip.flag_buf_ptr[length] = buffer->error;
+
+ length += count;
+ info->recv_cnt -= count;
+ DFLIP(DEBUG_LOG(info->line,"flip: %i\n", length));
+
+ if (count == buffer->length) {
+ info->first_recv_buffer = buffer->next;
+ kfree(buffer);
+ } else {
+ buffer->length -= count;
+ memmove(buffer->buffer, buffer->buffer + count, buffer->length);
+ buffer->error = TTY_NORMAL;
+ }
+ }
+
+ if (!info->first_recv_buffer)
+ info->last_recv_buffer = NULL;
+
+ tty->flip.count = length;
+ DFLIP(if (tty->ldisc.chars_in_buffer(tty) > 3500) {
+ DEBUG_LOG(info->line, "ldisc %lu\n",
+ tty->ldisc.chars_in_buffer(tty));
+ DEBUG_LOG(info->line, "flip.count %lu\n",
+ tty->flip.count);
+ }
+ );
+ restore_flags(flags);
+
+ DFLIP(
+ if (1) {
+
+ if (test_bit(TTY_DONT_FLIP, &tty->flags)) {
+ DEBUG_LOG(info->line, "*** TTY_DONT_FLIP set flip.count %i ***\n", tty->flip.count);
+ DEBUG_LOG(info->line, "*** recv_cnt %i\n", info->recv_cnt);
+ } else {
+ }
+ DEBUG_LOG(info->line, "*** rxtot %i\n", info->icount.rx);
+ DEBUG_LOG(info->line, "ldisc %lu\n", tty->ldisc.chars_in_buffer(tty));
+ DEBUG_LOG(info->line, "room %lu\n", tty->ldisc.receive_room(tty));
+ }
+
+ );
+
+ /* this includes a check for low-latency */
+ tty_flip_buffer_push(tty);
+}
+
+static _INLINE_ void
+check_flush_timeout(struct e100_serial *info)
+{
+ /* Flip what we've got (if we can) */
+ flush_to_flip_buffer(info);
+
+ /* We might need to flip later, but not to fast
+ * since the system is busy processing input... */
+ if (info->first_recv_buffer)
+ START_FLUSH_FAST_TIMER_TIME(info, "flip", 2000);
+
+ /* Force eop last, since data might have come while we're processing
+ * and if we started the slow timer above, we won't start a fast
+ * below.
+ */
+ force_eop_if_needed(info);
+}
+
+#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
+static void flush_timeout_function(unsigned long data)
+{
+ struct e100_serial *info = (struct e100_serial *)data;
+
+ fast_timers[info->line].function = NULL;
+ serial_fast_timer_expired++;
+ TIMERD(DEBUG_LOG(info->line, "flush_timout %i ", info->line));
+ TIMERD(DEBUG_LOG(info->line, "num expired: %i\n", serial_fast_timer_expired));
+ check_flush_timeout(info);
+}
+
+#else
+
+/* dma fifo/buffer timeout handler
+ forces an end-of-packet for the dma input channel if no chars
+ have been received for CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS/100 s.
+*/
+
+static struct timer_list flush_timer;
+
+static void
+timed_flush_handler(unsigned long ptr)
+{
+ struct e100_serial *info;
+ int i;
+
+#ifdef CONFIG_SVINTO_SIM
+ return;
+#endif
+
+ for (i = 0; i < NR_PORTS; i++) {
+ info = rs_table + i;
+ if (info->uses_dma_in)
+ check_flush_timeout(info);
+ }
+
+ /* restart flush timer */
+ mod_timer(&flush_timer, jiffies + CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS);
+}
+#endif
+
+#ifdef SERIAL_HANDLE_EARLY_ERRORS
+
+/* If there is an error (ie break) when the DMA is running and
+ * there are no bytes in the fifo the DMA is stopped and we get no
+ * eop interrupt. Thus we have to monitor the first bytes on a DMA
+ * transfer, and if it is without error we can turn the serial
+ * interrupts off.
+ */
+
+/*
+BREAK handling on ETRAX 100:
+ETRAX will generate interrupt although there is no stop bit between the
+characters.
+
+Depending on how long the break sequence is, the end of the breaksequence
+will look differently:
+| indicates start/end of a character.
+
+B= Break character (0x00) with framing error.
+E= Error byte with parity error received after B characters.
+F= "Faked" valid byte received immediately after B characters.
+V= Valid byte
+
+1.
+ B BL ___________________________ V
+.._|__________|__________| |valid data |
+
+Multiple frame errors with data == 0x00 (B),
+the timing matches up "perfectly" so no extra ending char is detected.
+The RXD pin is 1 in the last interrupt, in that case
+we set info->errorcode = ERRCODE_INSERT_BREAK, but we can't really
+know if another byte will come and this really is case 2. below
+(e.g F=0xFF or 0xFE)
+If RXD pin is 0 we can expect another character (see 2. below).
+
+
+2.
+
+ B B E or F__________________..__ V
+.._|__________|__________|______ | |valid data
+ "valid" or
+ parity error
+
+Multiple frame errors with data == 0x00 (B),
+but the part of the break trigs is interpreted as a start bit (and possibly
+some 0 bits followed by a number of 1 bits and a stop bit).
+Depending on parity settings etc. this last character can be either
+a fake "valid" char (F) or have a parity error (E).
+
+If the character is valid it will be put in the buffer,
+we set info->errorcode = ERRCODE_SET_BREAK so the receive interrupt
+will set the flags so the tty will handle it,
+if it's an error byte it will not be put in the buffer
+and we set info->errorcode = ERRCODE_INSERT_BREAK.
+
+To distinguish a V byte in 1. from an F byte in 2. we keep a timestamp
+of the last faulty char (B) and compares it with the current time:
+If the time elapsed time is less then 2*char_time_usec we will assume
+it's a faked F char and not a Valid char and set
+info->errorcode = ERRCODE_SET_BREAK.
+
+Flaws in the above solution:
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+We use the timer to distinguish a F character from a V character,
+if a V character is to close after the break we might make the wrong decision.
+
+TODO: The break will be delayed until an F or V character is received.
+
+*/
+
+extern _INLINE_
+struct e100_serial * handle_ser_rx_interrupt_no_dma(struct e100_serial *info)
+{
+ unsigned long data_read;
+ struct tty_struct *tty = info->tty;
+
+ if (!tty) {
+ printk("!NO TTY!\n");
+ return info;
+ }
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE - TTY_THRESHOLD_THROTTLE) {
+ /* check TTY_THROTTLED first so it indicates our state */
+ if (!test_and_set_bit(TTY_THROTTLED, &tty->flags)) {
+ DFLOW(DEBUG_LOG(info->line, "rs_throttle flip.count: %i\n", tty->flip.count));
+ rs_throttle(tty);
+ }
+ }
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
+ DEBUG_LOG(info->line, "force FLIP! %i\n", tty->flip.count);
+ tty->flip.work.func((void *) tty);
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
+ DEBUG_LOG(info->line, "FLIP FULL! %i\n", tty->flip.count);
+ return info; /* if TTY_DONT_FLIP is set */
+ }
+ }
+ /* Read data and status at the same time */
+ data_read = *((unsigned long *)&info->port[REG_DATA_STATUS32]);
+more_data:
+ if (data_read & IO_MASK(R_SERIAL0_READ, xoff_detect) ) {
+ DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0));
+ }
+ DINTR2(DEBUG_LOG(info->line, "ser_rx %c\n", IO_EXTRACT(R_SERIAL0_READ, data_in, data_read)));
+
+ if (data_read & ( IO_MASK(R_SERIAL0_READ, framing_err) |
+ IO_MASK(R_SERIAL0_READ, par_err) |
+ IO_MASK(R_SERIAL0_READ, overrun) )) {
+ /* An error */
+ info->last_rx_active_usec = GET_JIFFIES_USEC();
+ info->last_rx_active = jiffies;
+ DINTR1(DEBUG_LOG(info->line, "ser_rx err stat_data %04X\n", data_read));
+ DLOG_INT_TRIG(
+ if (!log_int_trig1_pos) {
+ log_int_trig1_pos = log_int_pos;
+ log_int(rdpc(), 0, 0);
+ }
+ );
+
+
+ if ( ((data_read & IO_MASK(R_SERIAL0_READ, data_in)) == 0) &&
+ (data_read & IO_MASK(R_SERIAL0_READ, framing_err)) ) {
+ /* Most likely a break, but we get interrupts over and
+ * over again.
+ */
+
+ if (!info->break_detected_cnt) {
+ DEBUG_LOG(info->line, "#BRK start\n", 0);
+ }
+ if (data_read & IO_MASK(R_SERIAL0_READ, rxd)) {
+ /* The RX pin is high now, so the break
+ * must be over, but....
+ * we can't really know if we will get another
+ * last byte ending the break or not.
+ * And we don't know if the byte (if any) will
+ * have an error or look valid.
+ */
+ DEBUG_LOG(info->line, "# BL BRK\n", 0);
+ info->errorcode = ERRCODE_INSERT_BREAK;
+ }
+ info->break_detected_cnt++;
+ } else {
+ /* The error does not look like a break, but could be
+ * the end of one
+ */
+ if (info->break_detected_cnt) {
+ DEBUG_LOG(info->line, "EBRK %i\n", info->break_detected_cnt);
+ info->errorcode = ERRCODE_INSERT_BREAK;
+ } else {
+ if (info->errorcode == ERRCODE_INSERT_BREAK) {
+ info->icount.brk++;
+ *tty->flip.char_buf_ptr = 0;
+ *tty->flip.flag_buf_ptr = TTY_BREAK;
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ tty->flip.count++;
+ info->icount.rx++;
+ }
+ *tty->flip.char_buf_ptr = IO_EXTRACT(R_SERIAL0_READ, data_in, data_read);
+
+ if (data_read & IO_MASK(R_SERIAL0_READ, par_err)) {
+ info->icount.parity++;
+ *tty->flip.flag_buf_ptr = TTY_PARITY;
+ } else if (data_read & IO_MASK(R_SERIAL0_READ, overrun)) {
+ info->icount.overrun++;
+ *tty->flip.flag_buf_ptr = TTY_OVERRUN;
+ } else if (data_read & IO_MASK(R_SERIAL0_READ, framing_err)) {
+ info->icount.frame++;
+ *tty->flip.flag_buf_ptr = TTY_FRAME;
+ }
+ info->errorcode = 0;
+ }
+ info->break_detected_cnt = 0;
+ }
+ } else if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) {
+ /* No error */
+ DLOG_INT_TRIG(
+ if (!log_int_trig1_pos) {
+ if (log_int_pos >= log_int_size) {
+ log_int_pos = 0;
+ }
+ log_int_trig0_pos = log_int_pos;
+ log_int(rdpc(), 0, 0);
+ }
+ );
+ *tty->flip.char_buf_ptr = IO_EXTRACT(R_SERIAL0_READ, data_in, data_read);
+ *tty->flip.flag_buf_ptr = 0;
+ } else {
+ DEBUG_LOG(info->line, "ser_rx int but no data_avail %08lX\n", data_read);
+ }
+
+
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ tty->flip.count++;
+ info->icount.rx++;
+ data_read = *((unsigned long *)&info->port[REG_DATA_STATUS32]);
+ if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) {
+ DEBUG_LOG(info->line, "ser_rx %c in loop\n", IO_EXTRACT(R_SERIAL0_READ, data_in, data_read));
+ goto more_data;
+ }
+
+ tty_flip_buffer_push(info->tty);
+ return info;
+}
+
+extern _INLINE_
+struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info)
+{
+ unsigned char rstat;
+
+#ifdef SERIAL_DEBUG_INTR
+ printk("Interrupt from serport %d\n", i);
+#endif
+/* DEBUG_LOG(info->line, "ser_interrupt stat %03X\n", rstat | (i << 8)); */
+ if (!info->uses_dma_in) {
+ return handle_ser_rx_interrupt_no_dma(info);
+ }
+ /* DMA is used */
+ rstat = info->port[REG_STATUS];
+ if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) {
+ DFLOW(DEBUG_LOG(info->line, "XOFF detect\n", 0));
+ }
+
+ if (rstat & SER_ERROR_MASK) {
+ unsigned char data;
+
+ info->last_rx_active_usec = GET_JIFFIES_USEC();
+ info->last_rx_active = jiffies;
+ /* If we got an error, we must reset it by reading the
+ * data_in field
+ */
+ data = info->port[REG_DATA];
+ DINTR1(DEBUG_LOG(info->line, "ser_rx! %c\n", data));
+ DINTR1(DEBUG_LOG(info->line, "ser_rx err stat %02X\n", rstat));
+ if (!data && (rstat & SER_FRAMING_ERR_MASK)) {
+ /* Most likely a break, but we get interrupts over and
+ * over again.
+ */
+
+ if (!info->break_detected_cnt) {
+ DEBUG_LOG(info->line, "#BRK start\n", 0);
+ }
+ if (rstat & SER_RXD_MASK) {
+ /* The RX pin is high now, so the break
+ * must be over, but....
+ * we can't really know if we will get another
+ * last byte ending the break or not.
+ * And we don't know if the byte (if any) will
+ * have an error or look valid.
+ */
+ DEBUG_LOG(info->line, "# BL BRK\n", 0);
+ info->errorcode = ERRCODE_INSERT_BREAK;
+ }
+ info->break_detected_cnt++;
+ } else {
+ /* The error does not look like a break, but could be
+ * the end of one
+ */
+ if (info->break_detected_cnt) {
+ DEBUG_LOG(info->line, "EBRK %i\n", info->break_detected_cnt);
+ info->errorcode = ERRCODE_INSERT_BREAK;
+ } else {
+ if (info->errorcode == ERRCODE_INSERT_BREAK) {
+ info->icount.brk++;
+ add_char_and_flag(info, '\0', TTY_BREAK);
+ }
+
+ if (rstat & SER_PAR_ERR_MASK) {
+ info->icount.parity++;
+ add_char_and_flag(info, data, TTY_PARITY);
+ } else if (rstat & SER_OVERRUN_MASK) {
+ info->icount.overrun++;
+ add_char_and_flag(info, data, TTY_OVERRUN);
+ } else if (rstat & SER_FRAMING_ERR_MASK) {
+ info->icount.frame++;
+ add_char_and_flag(info, data, TTY_FRAME);
+ }
+
+ info->errorcode = 0;
+ }
+ info->break_detected_cnt = 0;
+ DEBUG_LOG(info->line, "#iERR s d %04X\n",
+ ((rstat & SER_ERROR_MASK) << 8) | data);
+ }
+ PROCSTAT(ser_stat[info->line].early_errors_cnt++);
+ } else { /* It was a valid byte, now let the DMA do the rest */
+ unsigned long curr_time_u = GET_JIFFIES_USEC();
+ unsigned long curr_time = jiffies;
+
+ if (info->break_detected_cnt) {
+ /* Detect if this character is a new valid char or the
+ * last char in a break sequence: If LSBits are 0 and
+ * MSBits are high AND the time is close to the
+ * previous interrupt we should discard it.
+ */
+ long elapsed_usec =
+ (curr_time - info->last_rx_active) * (1000000/HZ) +
+ curr_time_u - info->last_rx_active_usec;
+ if (elapsed_usec < 2*info->char_time_usec) {
+ DEBUG_LOG(info->line, "FBRK %i\n", info->line);
+ /* Report as BREAK (error) and let
+ * receive_chars_dma() handle it
+ */
+ info->errorcode = ERRCODE_SET_BREAK;
+ } else {
+ DEBUG_LOG(info->line, "Not end of BRK (V)%i\n", info->line);
+ }
+ DEBUG_LOG(info->line, "num brk %i\n", info->break_detected_cnt);
+ }
+
+#ifdef SERIAL_DEBUG_INTR
+ printk("** OK, disabling ser_interrupts\n");
+#endif
+ e100_disable_serial_data_irq(info);
+ DINTR2(DEBUG_LOG(info->line, "ser_rx OK %d\n", info->line));
+ info->break_detected_cnt = 0;
+
+ PROCSTAT(ser_stat[info->line].ser_ints_ok_cnt++);
+ }
+ /* Restarting the DMA never hurts */
+ *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart);
+ START_FLUSH_FAST_TIMER(info, "ser_int");
+ return info;
+} /* handle_ser_rx_interrupt */
+
+extern _INLINE_ void handle_ser_tx_interrupt(struct e100_serial *info)
+{
+ unsigned long flags;
+
+ if (info->x_char) {
+ unsigned char rstat;
+ DFLOW(DEBUG_LOG(info->line, "tx_int: xchar 0x%02X\n", info->x_char));
+ save_flags(flags); cli();
+ rstat = info->port[REG_STATUS];
+ DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat));
+
+ info->port[REG_TR_DATA] = info->x_char;
+ info->icount.tx++;
+ info->x_char = 0;
+ /* We must enable since it is disabled in ser_interrupt */
+ e100_enable_serial_tx_ready_irq(info);
+ restore_flags(flags);
+ return;
+ }
+ if (info->uses_dma_out) {
+ unsigned char rstat;
+ int i;
+ /* We only use normal tx interrupt when sending x_char */
+ DFLOW(DEBUG_LOG(info->line, "tx_int: xchar sent\n", 0));
+ save_flags(flags); cli();
+ rstat = info->port[REG_STATUS];
+ DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat));
+ e100_disable_serial_tx_ready_irq(info);
+ if (info->tty->stopped)
+ rs_stop(info->tty);
+ /* Enable the DMA channel and tell it to continue */
+ e100_enable_txdma_channel(info);
+ /* Wait 12 cycles before doing the DMA command */
+ for(i = 6; i > 0; i--)
+ nop();
+
+ *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, continue);
+ restore_flags(flags);
+ return;
+ }
+ /* Normal char-by-char interrupt */
+ if (info->xmit.head == info->xmit.tail
+ || info->tty->stopped
+ || info->tty->hw_stopped) {
+ DFLOW(DEBUG_LOG(info->line, "tx_int: stopped %i\n", info->tty->stopped));
+ e100_disable_serial_tx_ready_irq(info);
+ info->tr_running = 0;
+ return;
+ }
+ DINTR2(DEBUG_LOG(info->line, "tx_int %c\n", info->xmit.buf[info->xmit.tail]));
+ /* Send a byte, rs485 timing is critical so turn of ints */
+ save_flags(flags); cli();
+ info->port[REG_TR_DATA] = info->xmit.buf[info->xmit.tail];
+ info->xmit.tail = (info->xmit.tail + 1) & (SERIAL_XMIT_SIZE-1);
+ info->icount.tx++;
+ if (info->xmit.head == info->xmit.tail) {
+#if defined(CONFIG_ETRAX_RS485) && defined(CONFIG_ETRAX_FAST_TIMER)
+ if (info->rs485.enabled) {
+ /* Set a short timer to toggle RTS */
+ start_one_shot_timer(&fast_timers_rs485[info->line],
+ rs485_toggle_rts_timer_function,
+ (unsigned long)info,
+ info->char_time_usec*2,
+ "RS-485");
+ }
+#endif /* RS485 */
+ info->last_tx_active_usec = GET_JIFFIES_USEC();
+ info->last_tx_active = jiffies;
+ e100_disable_serial_tx_ready_irq(info);
+ info->tr_running = 0;
+ DFLOW(DEBUG_LOG(info->line, "tx_int: stop2\n", 0));
+ } else {
+ /* We must enable since it is disabled in ser_interrupt */
+ e100_enable_serial_tx_ready_irq(info);
+ }
+ restore_flags(flags);
+
+ if (CIRC_CNT(info->xmit.head,
+ info->xmit.tail,
+ SERIAL_XMIT_SIZE) < WAKEUP_CHARS)
+ rs_sched_event(info, RS_EVENT_WRITE_WAKEUP);
+
+} /* handle_ser_tx_interrupt */
+
+/* result of time measurements:
+ * RX duration 54-60 us when doing something, otherwise 6-9 us
+ * ser_int duration: just sending: 8-15 us normally, up to 73 us
+ */
+static irqreturn_t
+ser_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ static volatile int tx_started = 0;
+ struct e100_serial *info;
+ int i;
+ unsigned long flags;
+ unsigned long irq_mask1_rd;
+ unsigned long data_mask = (1 << (8+2*0)); /* ser0 data_avail */
+ int handled = 0;
+ static volatile unsigned long reentered_ready_mask = 0;
+
+ save_flags(flags); cli();
+ irq_mask1_rd = *R_IRQ_MASK1_RD;
+ /* First handle all rx interrupts with ints disabled */
+ info = rs_table;
+ irq_mask1_rd &= e100_ser_int_mask;
+ for (i = 0; i < NR_PORTS; i++) {
+ /* Which line caused the data irq? */
+ if (irq_mask1_rd & data_mask) {
+ handled = 1;
+ handle_ser_rx_interrupt(info);
+ }
+ info += 1;
+ data_mask <<= 2;
+ }
+ /* Handle tx interrupts with interrupts enabled so we
+ * can take care of new data interrupts while transmitting
+ * We protect the tx part with the tx_started flag.
+ * We disable the tr_ready interrupts we are about to handle and
+ * unblock the serial interrupt so new serial interrupts may come.
+ *
+ * If we get a new interrupt:
+ * - it migth be due to synchronous serial ports.
+ * - serial irq will be blocked by general irq handler.
+ * - async data will be handled above (sync will be ignored).
+ * - tx_started flag will prevent us from trying to send again and
+ * we will exit fast - no need to unblock serial irq.
+ * - Next (sync) serial interrupt handler will be runned with
+ * disabled interrupt due to restore_flags() at end of function,
+ * so sync handler will not be preempted or reentered.
+ */
+ if (!tx_started) {
+ unsigned long ready_mask;
+ unsigned long
+ tx_started = 1;
+ /* Only the tr_ready interrupts left */
+ irq_mask1_rd &= (IO_MASK(R_IRQ_MASK1_RD, ser0_ready) |
+ IO_MASK(R_IRQ_MASK1_RD, ser1_ready) |
+ IO_MASK(R_IRQ_MASK1_RD, ser2_ready) |
+ IO_MASK(R_IRQ_MASK1_RD, ser3_ready));
+ while (irq_mask1_rd) {
+ /* Disable those we are about to handle */
+ *R_IRQ_MASK1_CLR = irq_mask1_rd;
+ /* Unblock the serial interrupt */
+ *R_VECT_MASK_SET = IO_STATE(R_VECT_MASK_SET, serial, set);
+
+ sti();
+ ready_mask = (1 << (8+1+2*0)); /* ser0 tr_ready */
+ info = rs_table;
+ for (i = 0; i < NR_PORTS; i++) {
+ /* Which line caused the ready irq? */
+ if (irq_mask1_rd & ready_mask) {
+ handled = 1;
+ handle_ser_tx_interrupt(info);
+ }
+ info += 1;
+ ready_mask <<= 2;
+ }
+ /* handle_ser_tx_interrupt enables tr_ready interrupts */
+ cli();
+ /* Handle reentered TX interrupt */
+ irq_mask1_rd = reentered_ready_mask;
+ }
+ cli();
+ tx_started = 0;
+ } else {
+ unsigned long ready_mask;
+ ready_mask = irq_mask1_rd & (IO_MASK(R_IRQ_MASK1_RD, ser0_ready) |
+ IO_MASK(R_IRQ_MASK1_RD, ser1_ready) |
+ IO_MASK(R_IRQ_MASK1_RD, ser2_ready) |
+ IO_MASK(R_IRQ_MASK1_RD, ser3_ready));
+ if (ready_mask) {
+ reentered_ready_mask |= ready_mask;
+ /* Disable those we are about to handle */
+ *R_IRQ_MASK1_CLR = ready_mask;
+ DFLOW(DEBUG_LOG(SERIAL_DEBUG_LINE, "ser_int reentered with TX %X\n", ready_mask));
+ }
+ }
+
+ restore_flags(flags);
+ return IRQ_RETVAL(handled);
+} /* ser_interrupt */
+#endif
+
+/*
+ * -------------------------------------------------------------------
+ * Here ends the serial interrupt routines.
+ * -------------------------------------------------------------------
+ */
+
+/*
+ * This routine is used to handle the "bottom half" processing for the
+ * serial driver, known also the "software interrupt" processing.
+ * This processing is done at the kernel interrupt level, after the
+ * rs_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This
+ * is where time-consuming activities which can not be done in the
+ * interrupt driver proper are done; the interrupt driver schedules
+ * them using rs_sched_event(), and they get done here.
+ */
+static void
+do_softint(void *private_)
+{
+ struct e100_serial *info = (struct e100_serial *) private_;
+ struct tty_struct *tty;
+
+ tty = info->tty;
+ if (!tty)
+ return;
+
+ if (test_and_clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) {
+ if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
+ tty->ldisc.write_wakeup)
+ (tty->ldisc.write_wakeup)(tty);
+ wake_up_interruptible(&tty->write_wait);
+ }
+}
+
+static int
+startup(struct e100_serial * info)
+{
+ unsigned long flags;
+ unsigned long xmit_page;
+ int i;
+
+ xmit_page = get_zeroed_page(GFP_KERNEL);
+ if (!xmit_page)
+ return -ENOMEM;
+
+ save_flags(flags);
+ cli();
+
+ /* if it was already initialized, skip this */
+
+ if (info->flags & ASYNC_INITIALIZED) {
+ restore_flags(flags);
+ free_page(xmit_page);
+ return 0;
+ }
+
+ if (info->xmit.buf)
+ free_page(xmit_page);
+ else
+ info->xmit.buf = (unsigned char *) xmit_page;
+
+#ifdef SERIAL_DEBUG_OPEN
+ printk("starting up ttyS%d (xmit_buf 0x%p)...\n", info->line, info->xmit.buf);
+#endif
+
+#ifdef CONFIG_SVINTO_SIM
+ /* Bits and pieces collected from below. Better to have them
+ in one ifdef:ed clause than to mix in a lot of ifdefs,
+ right? */
+ if (info->tty)
+ clear_bit(TTY_IO_ERROR, &info->tty->flags);
+
+ info->xmit.head = info->xmit.tail = 0;
+ info->first_recv_buffer = info->last_recv_buffer = NULL;
+ info->recv_cnt = info->max_recv_cnt = 0;
+
+ for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++)
+ info->rec_descr[i].buf = NULL;
+
+ /* No real action in the simulator, but may set info important
+ to ioctl. */
+ change_speed(info);
+#else
+
+ /*
+ * Clear the FIFO buffers and disable them
+ * (they will be reenabled in change_speed())
+ */
+
+ /*
+ * Reset the DMA channels and make sure their interrupts are cleared
+ */
+
+ if (info->dma_in_enabled) {
+ info->uses_dma_in = 1;
+ e100_enable_rxdma_channel(info);
+
+ *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset);
+
+ /* Wait until reset cycle is complete */
+ while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->icmdadr) ==
+ IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset));
+
+ /* Make sure the irqs are cleared */
+ *info->iclrintradr =
+ IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) |
+ IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do);
+ } else {
+ e100_disable_rxdma_channel(info);
+ }
+
+ if (info->dma_out_enabled) {
+ info->uses_dma_out = 1;
+ e100_enable_txdma_channel(info);
+ *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset);
+
+ while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->ocmdadr) ==
+ IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, reset));
+
+ /* Make sure the irqs are cleared */
+ *info->oclrintradr =
+ IO_STATE(R_DMA_CH6_CLR_INTR, clr_descr, do) |
+ IO_STATE(R_DMA_CH6_CLR_INTR, clr_eop, do);
+ } else {
+ e100_disable_txdma_channel(info);
+ }
+
+ if (info->tty)
+ clear_bit(TTY_IO_ERROR, &info->tty->flags);
+
+ info->xmit.head = info->xmit.tail = 0;
+ info->first_recv_buffer = info->last_recv_buffer = NULL;
+ info->recv_cnt = info->max_recv_cnt = 0;
+
+ for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++)
+ info->rec_descr[i].buf = 0;
+
+ /*
+ * and set the speed and other flags of the serial port
+ * this will start the rx/tx as well
+ */
+#ifdef SERIAL_HANDLE_EARLY_ERRORS
+ e100_enable_serial_data_irq(info);
+#endif
+ change_speed(info);
+
+ /* dummy read to reset any serial errors */
+
+ (void)info->port[REG_DATA];
+
+ /* enable the interrupts */
+ if (info->uses_dma_out)
+ e100_enable_txdma_irq(info);
+
+ e100_enable_rx_irq(info);
+
+ info->tr_running = 0; /* to be sure we don't lock up the transmitter */
+
+ /* setup the dma input descriptor and start dma */
+
+ start_receive(info);
+
+ /* for safety, make sure the descriptors last result is 0 bytes written */
+
+ info->tr_descr.sw_len = 0;
+ info->tr_descr.hw_len = 0;
+ info->tr_descr.status = 0;
+
+ /* enable RTS/DTR last */
+
+ e100_rts(info, 1);
+ e100_dtr(info, 1);
+
+#endif /* CONFIG_SVINTO_SIM */
+
+ info->flags |= ASYNC_INITIALIZED;
+
+ restore_flags(flags);
+ return 0;
+}
+
+/*
+ * This routine will shutdown a serial port; interrupts are disabled, and
+ * DTR is dropped if the hangup on close termio flag is on.
+ */
+static void
+shutdown(struct e100_serial * info)
+{
+ unsigned long flags;
+ struct etrax_dma_descr *descr = info->rec_descr;
+ struct etrax_recv_buffer *buffer;
+ int i;
+
+#ifndef CONFIG_SVINTO_SIM
+ /* shut down the transmitter and receiver */
+ DFLOW(DEBUG_LOG(info->line, "shutdown %i\n", info->line));
+ e100_disable_rx(info);
+ info->port[REG_TR_CTRL] = (info->tx_ctrl &= ~0x40);
+
+ /* disable interrupts, reset dma channels */
+ if (info->uses_dma_in) {
+ e100_disable_rxdma_irq(info);
+ *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset);
+ info->uses_dma_in = 0;
+ } else {
+ e100_disable_serial_data_irq(info);
+ }
+
+ if (info->uses_dma_out) {
+ e100_disable_txdma_irq(info);
+ info->tr_running = 0;
+ *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, reset);
+ info->uses_dma_out = 0;
+ } else {
+ e100_disable_serial_tx_ready_irq(info);
+ info->tr_running = 0;
+ }
+
+#endif /* CONFIG_SVINTO_SIM */
+
+ if (!(info->flags & ASYNC_INITIALIZED))
+ return;
+
+#ifdef SERIAL_DEBUG_OPEN
+ printk("Shutting down serial port %d (irq %d)....\n", info->line,
+ info->irq);
+#endif
+
+ save_flags(flags);
+ cli(); /* Disable interrupts */
+
+ if (info->xmit.buf) {
+ free_page((unsigned long)info->xmit.buf);
+ info->xmit.buf = NULL;
+ }
+
+ for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++)
+ if (descr[i].buf) {
+ buffer = phys_to_virt(descr[i].buf) - sizeof *buffer;
+ kfree(buffer);
+ descr[i].buf = 0;
+ }
+
+ if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) {
+ /* hang up DTR and RTS if HUPCL is enabled */
+ e100_dtr(info, 0);
+ e100_rts(info, 0); /* could check CRTSCTS before doing this */
+ }
+
+ if (info->tty)
+ set_bit(TTY_IO_ERROR, &info->tty->flags);
+
+ info->flags &= ~ASYNC_INITIALIZED;
+ restore_flags(flags);
+}
+
+
+/* change baud rate and other assorted parameters */
+
+static void
+change_speed(struct e100_serial *info)
+{
+ unsigned int cflag;
+ unsigned long xoff;
+ unsigned long flags;
+ /* first some safety checks */
+
+ if (!info->tty || !info->tty->termios)
+ return;
+ if (!info->port)
+ return;
+
+ cflag = info->tty->termios->c_cflag;
+
+ /* possibly, the tx/rx should be disabled first to do this safely */
+
+ /* change baud-rate and write it to the hardware */
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) {
+ /* Special baudrate */
+ u32 mask = 0xFF << (info->line*8); /* Each port has 8 bits */
+ unsigned long alt_source =
+ IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, normal) |
+ IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, normal);
+ /* R_ALT_SER_BAUDRATE selects the source */
+ DBAUD(printk("Custom baudrate: baud_base/divisor %lu/%i\n",
+ (unsigned long)info->baud_base, info->custom_divisor));
+ if (info->baud_base == SERIAL_PRESCALE_BASE) {
+ /* 0, 2-65535 (0=65536) */
+ u16 divisor = info->custom_divisor;
+ /* R_SERIAL_PRESCALE (upper 16 bits of R_CLOCK_PRESCALE) */
+ /* baudrate is 3.125MHz/custom_divisor */
+ alt_source =
+ IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, prescale) |
+ IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, prescale);
+ alt_source = 0x11;
+ DBAUD(printk("Writing SERIAL_PRESCALE: divisor %i\n", divisor));
+ *R_SERIAL_PRESCALE = divisor;
+ info->baud = SERIAL_PRESCALE_BASE/divisor;
+ }
+#ifdef CONFIG_ETRAX_EXTERN_PB6CLK_ENABLED
+ else if ((info->baud_base==CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8 &&
+ info->custom_divisor == 1) ||
+ (info->baud_base==CONFIG_ETRAX_EXTERN_PB6CLK_FREQ &&
+ info->custom_divisor == 8)) {
+ /* ext_clk selected */
+ alt_source =
+ IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, extern) |
+ IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, extern);
+ DBAUD(printk("using external baudrate: %lu\n", CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8));
+ info->baud = CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8;
+ }
+ }
+#endif
+ else
+ {
+ /* Bad baudbase, we don't support using timer0
+ * for baudrate.
+ */
+ printk(KERN_WARNING "Bad baud_base/custom_divisor: %lu/%i\n",
+ (unsigned long)info->baud_base, info->custom_divisor);
+ }
+ r_alt_ser_baudrate_shadow &= ~mask;
+ r_alt_ser_baudrate_shadow |= (alt_source << (info->line*8));
+ *R_ALT_SER_BAUDRATE = r_alt_ser_baudrate_shadow;
+ } else {
+ /* Normal baudrate */
+ /* Make sure we use normal baudrate */
+ u32 mask = 0xFF << (info->line*8); /* Each port has 8 bits */
+ unsigned long alt_source =
+ IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, normal) |
+ IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, normal);
+ r_alt_ser_baudrate_shadow &= ~mask;
+ r_alt_ser_baudrate_shadow |= (alt_source << (info->line*8));
+#ifndef CONFIG_SVINTO_SIM
+ *R_ALT_SER_BAUDRATE = r_alt_ser_baudrate_shadow;
+#endif /* CONFIG_SVINTO_SIM */
+
+ info->baud = cflag_to_baud(cflag);
+#ifndef CONFIG_SVINTO_SIM
+ info->port[REG_BAUD] = cflag_to_etrax_baud(cflag);
+#endif /* CONFIG_SVINTO_SIM */
+ }
+
+#ifndef CONFIG_SVINTO_SIM
+ /* start with default settings and then fill in changes */
+ save_flags(flags);
+ cli();
+ /* 8 bit, no/even parity */
+ info->rx_ctrl &= ~(IO_MASK(R_SERIAL0_REC_CTRL, rec_bitnr) |
+ IO_MASK(R_SERIAL0_REC_CTRL, rec_par_en) |
+ IO_MASK(R_SERIAL0_REC_CTRL, rec_par));
+
+ /* 8 bit, no/even parity, 1 stop bit, no cts */
+ info->tx_ctrl &= ~(IO_MASK(R_SERIAL0_TR_CTRL, tr_bitnr) |
+ IO_MASK(R_SERIAL0_TR_CTRL, tr_par_en) |
+ IO_MASK(R_SERIAL0_TR_CTRL, tr_par) |
+ IO_MASK(R_SERIAL0_TR_CTRL, stop_bits) |
+ IO_MASK(R_SERIAL0_TR_CTRL, auto_cts));
+
+ if ((cflag & CSIZE) == CS7) {
+ /* set 7 bit mode */
+ info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_bitnr, tr_7bit);
+ info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_bitnr, rec_7bit);
+ }
+
+ if (cflag & CSTOPB) {
+ /* set 2 stop bit mode */
+ info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, stop_bits, two_bits);
+ }
+
+ if (cflag & PARENB) {
+ /* enable parity */
+ info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_par_en, enable);
+ info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_par_en, enable);
+ }
+
+ if (cflag & CMSPAR) {
+ /* enable stick parity, PARODD mean Mark which matches ETRAX */
+ info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_stick_par, stick);
+ info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_stick_par, stick);
+ }
+ if (cflag & PARODD) {
+ /* set odd parity (or Mark if CMSPAR) */
+ info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_par, odd);
+ info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_par, odd);
+ }
+
+ if (cflag & CRTSCTS) {
+ /* enable automatic CTS handling */
+ DFLOW(DEBUG_LOG(info->line, "FLOW auto_cts enabled\n", 0));
+ info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, auto_cts, active);
+ }
+
+ /* make sure the tx and rx are enabled */
+
+ info->tx_ctrl |= IO_STATE(R_SERIAL0_TR_CTRL, tr_enable, enable);
+ info->rx_ctrl |= IO_STATE(R_SERIAL0_REC_CTRL, rec_enable, enable);
+
+ /* actually write the control regs to the hardware */
+
+ info->port[REG_TR_CTRL] = info->tx_ctrl;
+ info->port[REG_REC_CTRL] = info->rx_ctrl;
+ xoff = IO_FIELD(R_SERIAL0_XOFF, xoff_char, STOP_CHAR(info->tty));
+ xoff |= IO_STATE(R_SERIAL0_XOFF, tx_stop, enable);
+ if (info->tty->termios->c_iflag & IXON ) {
+ DFLOW(DEBUG_LOG(info->line, "FLOW XOFF enabled 0x%02X\n", STOP_CHAR(info->tty)));
+ xoff |= IO_STATE(R_SERIAL0_XOFF, auto_xoff, enable);
+ }
+
+ *((unsigned long *)&info->port[REG_XOFF]) = xoff;
+ restore_flags(flags);
+#endif /* !CONFIG_SVINTO_SIM */
+
+ update_char_time(info);
+
+} /* change_speed */
+
+/* start transmitting chars NOW */
+
+static void
+rs_flush_chars(struct tty_struct *tty)
+{
+ struct e100_serial *info = (struct e100_serial *)tty->driver_data;
+ unsigned long flags;
+
+ if (info->tr_running ||
+ info->xmit.head == info->xmit.tail ||
+ tty->stopped ||
+ tty->hw_stopped ||
+ !info->xmit.buf)
+ return;
+
+#ifdef SERIAL_DEBUG_FLOW
+ printk("rs_flush_chars\n");
+#endif
+
+ /* this protection might not exactly be necessary here */
+
+ save_flags(flags);
+ cli();
+ start_transmit(info);
+ restore_flags(flags);
+}
+
+extern _INLINE_ int
+rs_raw_write(struct tty_struct * tty, int from_user,
+ const unsigned char *buf, int count)
+{
+ int c, ret = 0;
+ struct e100_serial *info = (struct e100_serial *)tty->driver_data;
+ unsigned long flags;
+
+ /* first some sanity checks */
+
+ if (!tty || !info->xmit.buf || !tmp_buf)
+ return 0;
+
+#ifdef SERIAL_DEBUG_DATA
+ if (info->line == SERIAL_DEBUG_LINE)
+ printk("rs_raw_write (%d), status %d\n",
+ count, info->port[REG_STATUS]);
+#endif
+
+#ifdef CONFIG_SVINTO_SIM
+ /* Really simple. The output is here and now. */
+ SIMCOUT(buf, count);
+ return count;
+#endif
+ save_flags(flags);
+ DFLOW(DEBUG_LOG(info->line, "write count %i ", count));
+ DFLOW(DEBUG_LOG(info->line, "ldisc %i\n", tty->ldisc.chars_in_buffer(tty)));
+
+
+ /* the cli/restore_flags pairs below are needed because the
+ * DMA interrupt handler moves the info->xmit values. the memcpy
+ * needs to be in the critical region unfortunately, because we
+ * need to read xmit values, memcpy, write xmit values in one
+ * atomic operation... this could perhaps be avoided by more clever
+ * design.
+ */
+ if (from_user) {
+ down(&tmp_buf_sem);
+ while (1) {
+ int c1;
+ c = CIRC_SPACE_TO_END(info->xmit.head,
+ info->xmit.tail,
+ SERIAL_XMIT_SIZE);
+ if (count < c)
+ c = count;
+ if (c <= 0)
+ break;
+
+ c -= copy_from_user(tmp_buf, buf, c);
+ if (!c) {
+ if (!ret)
+ ret = -EFAULT;
+ break;
+ }
+ cli();
+ c1 = CIRC_SPACE_TO_END(info->xmit.head,
+ info->xmit.tail,
+ SERIAL_XMIT_SIZE);
+ if (c1 < c)
+ c = c1;
+ memcpy(info->xmit.buf + info->xmit.head, tmp_buf, c);
+ info->xmit.head = ((info->xmit.head + c) &
+ (SERIAL_XMIT_SIZE-1));
+ restore_flags(flags);
+ buf += c;
+ count -= c;
+ ret += c;
+ }
+ up(&tmp_buf_sem);
+ } else {
+ cli();
+ while (count) {
+ c = CIRC_SPACE_TO_END(info->xmit.head,
+ info->xmit.tail,
+ SERIAL_XMIT_SIZE);
+
+ if (count < c)
+ c = count;
+ if (c <= 0)
+ break;
+
+ memcpy(info->xmit.buf + info->xmit.head, buf, c);
+ info->xmit.head = (info->xmit.head + c) &
+ (SERIAL_XMIT_SIZE-1);
+ buf += c;
+ count -= c;
+ ret += c;
+ }
+ restore_flags(flags);
+ }
+
+ /* enable transmitter if not running, unless the tty is stopped
+ * this does not need IRQ protection since if tr_running == 0
+ * the IRQ's are not running anyway for this port.
+ */
+ DFLOW(DEBUG_LOG(info->line, "write ret %i\n", ret));
+
+ if (info->xmit.head != info->xmit.tail &&
+ !tty->stopped &&
+ !tty->hw_stopped &&
+ !info->tr_running) {
+ start_transmit(info);
+ }
+
+ return ret;
+} /* raw_raw_write() */
+
+static int
+rs_write(struct tty_struct * tty, int from_user,
+ const unsigned char *buf, int count)
+{
+#if defined(CONFIG_ETRAX_RS485)
+ struct e100_serial *info = (struct e100_serial *)tty->driver_data;
+
+ if (info->rs485.enabled)
+ {
+ /* If we are in RS-485 mode, we need to toggle RTS and disable
+ * the receiver before initiating a DMA transfer
+ */
+#ifdef CONFIG_ETRAX_FAST_TIMER
+ /* Abort any started timer */
+ fast_timers_rs485[info->line].function = NULL;
+ del_fast_timer(&fast_timers_rs485[info->line]);
+#endif
+ e100_rts(info, info->rs485.rts_on_send);
+#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER)
+ e100_disable_rx(info);
+ e100_enable_rx_irq(info);
+#endif
+
+ if (info->rs485.delay_rts_before_send > 0)
+ msleep(info->rs485.delay_rts_before_send);
+ }
+#endif /* CONFIG_ETRAX_RS485 */
+
+ count = rs_raw_write(tty, from_user, buf, count);
+
+#if defined(CONFIG_ETRAX_RS485)
+ if (info->rs485.enabled)
+ {
+ unsigned int val;
+ /* If we are in RS-485 mode the following has to be done:
+ * wait until DMA is ready
+ * wait on transmit shift register
+ * toggle RTS
+ * enable the receiver
+ */
+
+ /* Sleep until all sent */
+ tty_wait_until_sent(tty, 0);
+#ifdef CONFIG_ETRAX_FAST_TIMER
+ /* Now sleep a little more so that shift register is empty */
+ schedule_usleep(info->char_time_usec * 2);
+#endif
+ /* wait on transmit shift register */
+ do{
+ get_lsr_info(info, &val);
+ }while (!(val & TIOCSER_TEMT));
+
+ e100_rts(info, info->rs485.rts_after_sent);
+
+#if defined(CONFIG_ETRAX_RS485_DISABLE_RECEIVER)
+ e100_enable_rx(info);
+ e100_enable_rxdma_irq(info);
+#endif
+ }
+#endif /* CONFIG_ETRAX_RS485 */
+
+ return count;
+} /* rs_write */
+
+
+/* how much space is available in the xmit buffer? */
+
+static int
+rs_write_room(struct tty_struct *tty)
+{
+ struct e100_serial *info = (struct e100_serial *)tty->driver_data;
+
+ return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
+}
+
+/* How many chars are in the xmit buffer?
+ * This does not include any chars in the transmitter FIFO.
+ * Use wait_until_sent for waiting for FIFO drain.
+ */
+
+static int
+rs_chars_in_buffer(struct tty_struct *tty)
+{
+ struct e100_serial *info = (struct e100_serial *)tty->driver_data;
+
+ return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
+}
+
+/* discard everything in the xmit buffer */
+
+static void
+rs_flush_buffer(struct tty_struct *tty)
+{
+ struct e100_serial *info = (struct e100_serial *)tty->driver_data;
+ unsigned long flags;
+
+ save_flags(flags);
+ cli();
+ info->xmit.head = info->xmit.tail = 0;
+ restore_flags(flags);
+
+ wake_up_interruptible(&tty->write_wait);
+
+ if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
+ tty->ldisc.write_wakeup)
+ (tty->ldisc.write_wakeup)(tty);
+}
+
+/*
+ * This function is used to send a high-priority XON/XOFF character to
+ * the device
+ *
+ * Since we use DMA we don't check for info->x_char in transmit_chars_dma(),
+ * but we do it in handle_ser_tx_interrupt().
+ * We disable DMA channel and enable tx ready interrupt and write the
+ * character when possible.
+ */
+static void rs_send_xchar(struct tty_struct *tty, char ch)
+{
+ struct e100_serial *info = (struct e100_serial *)tty->driver_data;
+ unsigned long flags;
+ save_flags(flags); cli();
+ if (info->uses_dma_out) {
+ /* Put the DMA on hold and disable the channel */
+ *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, hold);
+ while (IO_EXTRACT(R_DMA_CH6_CMD, cmd, *info->ocmdadr) !=
+ IO_STATE_VALUE(R_DMA_CH6_CMD, cmd, hold));
+ e100_disable_txdma_channel(info);
+ }
+
+ /* Must make sure transmitter is not stopped before we can transmit */
+ if (tty->stopped)
+ rs_start(tty);
+
+ /* Enable manual transmit interrupt and send from there */
+ DFLOW(DEBUG_LOG(info->line, "rs_send_xchar 0x%02X\n", ch));
+ info->x_char = ch;
+ e100_enable_serial_tx_ready_irq(info);
+ restore_flags(flags);
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_throttle()
+ *
+ * This routine is called by the upper-layer tty layer to signal that
+ * incoming characters should be throttled.
+ * ------------------------------------------------------------
+ */
+static void
+rs_throttle(struct tty_struct * tty)
+{
+ struct e100_serial *info = (struct e100_serial *)tty->driver_data;
+#ifdef SERIAL_DEBUG_THROTTLE
+ char buf[64];
+
+ printk("throttle %s: %lu....\n", tty_name(tty, buf),
+ (unsigned long)tty->ldisc.chars_in_buffer(tty));
+#endif
+ DFLOW(DEBUG_LOG(info->line,"rs_throttle %lu\n", tty->ldisc.chars_in_buffer(tty)));
+
+ /* Do RTS before XOFF since XOFF might take some time */
+ if (tty->termios->c_cflag & CRTSCTS) {
+ /* Turn off RTS line */
+ e100_rts(info, 0);
+ }
+ if (I_IXOFF(tty))
+ rs_send_xchar(tty, STOP_CHAR(tty));
+
+}
+
+static void
+rs_unthrottle(struct tty_struct * tty)
+{
+ struct e100_serial *info = (struct e100_serial *)tty->driver_data;
+#ifdef SERIAL_DEBUG_THROTTLE
+ char buf[64];
+
+ printk("unthrottle %s: %lu....\n", tty_name(tty, buf),
+ (unsigned long)tty->ldisc.chars_in_buffer(tty));
+#endif
+ DFLOW(DEBUG_LOG(info->line,"rs_unthrottle ldisc %d\n", tty->ldisc.chars_in_buffer(tty)));
+ DFLOW(DEBUG_LOG(info->line,"rs_unthrottle flip.count: %i\n", tty->flip.count));
+ /* Do RTS before XOFF since XOFF might take some time */
+ if (tty->termios->c_cflag & CRTSCTS) {
+ /* Assert RTS line */
+ e100_rts(info, 1);
+ }
+
+ if (I_IXOFF(tty)) {
+ if (info->x_char)
+ info->x_char = 0;
+ else
+ rs_send_xchar(tty, START_CHAR(tty));
+ }
+
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_ioctl() and friends
+ * ------------------------------------------------------------
+ */
+
+static int
+get_serial_info(struct e100_serial * info,
+ struct serial_struct * retinfo)
+{
+ struct serial_struct tmp;
+
+ /* this is all probably wrong, there are a lot of fields
+ * here that we don't have in e100_serial and maybe we
+ * should set them to something else than 0.
+ */
+
+ if (!retinfo)
+ return -EFAULT;
+ memset(&tmp, 0, sizeof(tmp));
+ tmp.type = info->type;
+ tmp.line = info->line;
+ tmp.port = (int)info->port;
+ tmp.irq = info->irq;
+ tmp.flags = info->flags;
+ tmp.baud_base = info->baud_base;
+ tmp.close_delay = info->close_delay;
+ tmp.closing_wait = info->closing_wait;
+ tmp.custom_divisor = info->custom_divisor;
+ if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
+ return -EFAULT;
+ return 0;
+}
+
+static int
+set_serial_info(struct e100_serial *info,
+ struct serial_struct *new_info)
+{
+ struct serial_struct new_serial;
+ struct e100_serial old_info;
+ int retval = 0;
+
+ if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
+ return -EFAULT;
+
+ old_info = *info;
+
+ if (!capable(CAP_SYS_ADMIN)) {
+ if ((new_serial.type != info->type) ||
+ (new_serial.close_delay != info->close_delay) ||
+ ((new_serial.flags & ~ASYNC_USR_MASK) !=
+ (info->flags & ~ASYNC_USR_MASK)))
+ return -EPERM;
+ info->flags = ((info->flags & ~ASYNC_USR_MASK) |
+ (new_serial.flags & ASYNC_USR_MASK));
+ goto check_and_exit;
+ }
+
+ if (info->count > 1)
+ return -EBUSY;
+
+ /*
+ * OK, past this point, all the error checking has been done.
+ * At this point, we start making changes.....
+ */
+
+ info->baud_base = new_serial.baud_base;
+ info->flags = ((info->flags & ~ASYNC_FLAGS) |
+ (new_serial.flags & ASYNC_FLAGS));
+ info->custom_divisor = new_serial.custom_divisor;
+ info->type = new_serial.type;
+ info->close_delay = new_serial.close_delay;
+ info->closing_wait = new_serial.closing_wait;
+ info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+
+ check_and_exit:
+ if (info->flags & ASYNC_INITIALIZED) {
+ change_speed(info);
+ } else
+ retval = startup(info);
+ return retval;
+}
+
+/*
+ * get_lsr_info - get line status register info
+ *
+ * Purpose: Let user call ioctl() to get info when the UART physically
+ * is emptied. On bus types like RS485, the transmitter must
+ * release the bus after transmitting. This must be done when
+ * the transmit shift register is empty, not be done when the
+ * transmit holding register is empty. This functionality
+ * allows an RS485 driver to be written in user space.
+ */
+static int
+get_lsr_info(struct e100_serial * info, unsigned int *value)
+{
+ unsigned int result = TIOCSER_TEMT;
+#ifndef CONFIG_SVINTO_SIM
+ unsigned long curr_time = jiffies;
+ unsigned long curr_time_usec = GET_JIFFIES_USEC();
+ unsigned long elapsed_usec =
+ (curr_time - info->last_tx_active) * 1000000/HZ +
+ curr_time_usec - info->last_tx_active_usec;
+
+ if (info->xmit.head != info->xmit.tail ||
+ elapsed_usec < 2*info->char_time_usec) {
+ result = 0;
+ }
+#endif
+
+ if (copy_to_user(value, &result, sizeof(int)))
+ return -EFAULT;
+ return 0;
+}
+
+#ifdef SERIAL_DEBUG_IO
+struct state_str
+{
+ int state;
+ const char *str;
+};
+
+const struct state_str control_state_str[] = {
+ {TIOCM_DTR, "DTR" },
+ {TIOCM_RTS, "RTS"},
+ {TIOCM_ST, "ST?" },
+ {TIOCM_SR, "SR?" },
+ {TIOCM_CTS, "CTS" },
+ {TIOCM_CD, "CD" },
+ {TIOCM_RI, "RI" },
+ {TIOCM_DSR, "DSR" },
+ {0, NULL }
+};
+
+char *get_control_state_str(int MLines, char *s)
+{
+ int i = 0;
+
+ s[0]='\0';
+ while (control_state_str[i].str != NULL) {
+ if (MLines & control_state_str[i].state) {
+ if (s[0] != '\0') {
+ strcat(s, ", ");
+ }
+ strcat(s, control_state_str[i].str);
+ }
+ i++;
+ }
+ return s;
+}
+#endif
+
+static int
+get_modem_info(struct e100_serial * info, unsigned int *value)
+{
+ unsigned int result;
+ /* Polarity isn't verified */
+#if 0 /*def SERIAL_DEBUG_IO */
+
+ printk("get_modem_info: RTS: %i DTR: %i CD: %i RI: %i DSR: %i CTS: %i\n",
+ E100_RTS_GET(info),
+ E100_DTR_GET(info),
+ E100_CD_GET(info),
+ E100_RI_GET(info),
+ E100_DSR_GET(info),
+ E100_CTS_GET(info));
+#endif
+
+ result =
+ (!E100_RTS_GET(info) ? TIOCM_RTS : 0)
+ | (!E100_DTR_GET(info) ? TIOCM_DTR : 0)
+ | (!E100_RI_GET(info) ? TIOCM_RNG : 0)
+ | (!E100_DSR_GET(info) ? TIOCM_DSR : 0)
+ | (!E100_CD_GET(info) ? TIOCM_CAR : 0)
+ | (!E100_CTS_GET(info) ? TIOCM_CTS : 0);
+
+#ifdef SERIAL_DEBUG_IO
+ printk("e100ser: modem state: %i 0x%08X\n", result, result);
+ {
+ char s[100];
+
+ get_control_state_str(result, s);
+ printk("state: %s\n", s);
+ }
+#endif
+ if (copy_to_user(value, &result, sizeof(int)))
+ return -EFAULT;
+ return 0;
+}
+
+
+static int
+set_modem_info(struct e100_serial * info, unsigned int cmd,
+ unsigned int *value)
+{
+ unsigned int arg;
+
+ if (copy_from_user(&arg, value, sizeof(int)))
+ return -EFAULT;
+
+ switch (cmd) {
+ case TIOCMBIS:
+ if (arg & TIOCM_RTS) {
+ e100_rts(info, 1);
+ }
+ if (arg & TIOCM_DTR) {
+ e100_dtr(info, 1);
+ }
+ /* Handle FEMALE behaviour */
+ if (arg & TIOCM_RI) {
+ e100_ri_out(info, 1);
+ }
+ if (arg & TIOCM_CD) {
+ e100_cd_out(info, 1);
+ }
+ break;
+ case TIOCMBIC:
+ if (arg & TIOCM_RTS) {
+ e100_rts(info, 0);
+ }
+ if (arg & TIOCM_DTR) {
+ e100_dtr(info, 0);
+ }
+ /* Handle FEMALE behaviour */
+ if (arg & TIOCM_RI) {
+ e100_ri_out(info, 0);
+ }
+ if (arg & TIOCM_CD) {
+ e100_cd_out(info, 0);
+ }
+ break;
+ case TIOCMSET:
+ e100_rts(info, arg & TIOCM_RTS);
+ e100_dtr(info, arg & TIOCM_DTR);
+ /* Handle FEMALE behaviour */
+ e100_ri_out(info, arg & TIOCM_RI);
+ e100_cd_out(info, arg & TIOCM_CD);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+
+static void
+rs_break(struct tty_struct *tty, int break_state)
+{
+ struct e100_serial * info = (struct e100_serial *)tty->driver_data;
+ unsigned long flags;
+
+ if (!info->port)
+ return;
+
+ save_flags(flags);
+ cli();
+ if (break_state == -1) {
+ /* Go to manual mode and set the txd pin to 0 */
+ info->tx_ctrl &= 0x3F; /* Clear bit 7 (txd) and 6 (tr_enable) */
+ } else {
+ info->tx_ctrl |= (0x80 | 0x40); /* Set bit 7 (txd) and 6 (tr_enable) */
+ }
+ info->port[REG_TR_CTRL] = info->tx_ctrl;
+ restore_flags(flags);
+}
+
+static int
+rs_ioctl(struct tty_struct *tty, struct file * file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct e100_serial * info = (struct e100_serial *)tty->driver_data;
+
+ if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
+ (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) &&
+ (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) {
+ if (tty->flags & (1 << TTY_IO_ERROR))
+ return -EIO;
+ }
+
+ switch (cmd) {
+ case TIOCMGET:
+ return get_modem_info(info, (unsigned int *) arg);
+ case TIOCMBIS:
+ case TIOCMBIC:
+ case TIOCMSET:
+ return set_modem_info(info, cmd, (unsigned int *) arg);
+ case TIOCGSERIAL:
+ return get_serial_info(info,
+ (struct serial_struct *) arg);
+ case TIOCSSERIAL:
+ return set_serial_info(info,
+ (struct serial_struct *) arg);
+ case TIOCSERGETLSR: /* Get line status register */
+ return get_lsr_info(info, (unsigned int *) arg);
+
+ case TIOCSERGSTRUCT:
+ if (copy_to_user((struct e100_serial *) arg,
+ info, sizeof(struct e100_serial)))
+ return -EFAULT;
+ return 0;
+
+#if defined(CONFIG_ETRAX_RS485)
+ case TIOCSERSETRS485:
+ {
+ struct rs485_control rs485ctrl;
+ if (copy_from_user(&rs485ctrl, (struct rs485_control*)arg, sizeof(rs485ctrl)))
+ return -EFAULT;
+
+ return e100_enable_rs485(tty, &rs485ctrl);
+ }
+
+ case TIOCSERWRRS485:
+ {
+ struct rs485_write rs485wr;
+ if (copy_from_user(&rs485wr, (struct rs485_write*)arg, sizeof(rs485wr)))
+ return -EFAULT;
+
+ return e100_write_rs485(tty, 1, rs485wr.outc, rs485wr.outc_size);
+ }
+#endif
+
+ default:
+ return -ENOIOCTLCMD;
+ }
+ return 0;
+}
+
+static void
+rs_set_termios(struct tty_struct *tty, struct termios *old_termios)
+{
+ struct e100_serial *info = (struct e100_serial *)tty->driver_data;
+
+ if (tty->termios->c_cflag == old_termios->c_cflag &&
+ tty->termios->c_iflag == old_termios->c_iflag)
+ return;
+
+ change_speed(info);
+
+ /* Handle turning off CRTSCTS */
+ if ((old_termios->c_cflag & CRTSCTS) &&
+ !(tty->termios->c_cflag & CRTSCTS)) {
+ tty->hw_stopped = 0;
+ rs_start(tty);
+ }
+
+}
+
+/* In debugport.c - register a console write function that uses the normal
+ * serial driver
+ */
+typedef int (*debugport_write_function)(int i, const char *buf, unsigned int len);
+
+extern debugport_write_function debug_write_function;
+
+static int rs_debug_write_function(int i, const char *buf, unsigned int len)
+{
+ int cnt;
+ int written = 0;
+ struct tty_struct *tty;
+ static int recurse_cnt = 0;
+
+ tty = rs_table[i].tty;
+ if (tty) {
+ unsigned long flags;
+ if (recurse_cnt > 5) /* We skip this debug output */
+ return 1;
+
+ local_irq_save(flags);
+ recurse_cnt++;
+ local_irq_restore(flags);
+ do {
+ cnt = rs_write(tty, 0, buf + written, len);
+ if (cnt >= 0) {
+ written += cnt;
+ buf += cnt;
+ len -= cnt;
+ } else
+ len = cnt;
+ } while(len > 0);
+ local_irq_save(flags);
+ recurse_cnt--;
+ local_irq_restore(flags);
+ return 1;
+ }
+ return 0;
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_close()
+ *
+ * This routine is called when the serial port gets closed. First, we
+ * wait for the last remaining data to be sent. Then, we unlink its
+ * S structure from the interrupt chain if necessary, and we free
+ * that IRQ if nothing is left in the chain.
+ * ------------------------------------------------------------
+ */
+static void
+rs_close(struct tty_struct *tty, struct file * filp)
+{
+ struct e100_serial * info = (struct e100_serial *)tty->driver_data;
+ unsigned long flags;
+
+ if (!info)
+ return;
+
+ /* interrupts are disabled for this entire function */
+
+ save_flags(flags);
+ cli();
+
+ if (tty_hung_up_p(filp)) {
+ restore_flags(flags);
+ return;
+ }
+
+#ifdef SERIAL_DEBUG_OPEN
+ printk("[%d] rs_close ttyS%d, count = %d\n", current->pid,
+ info->line, info->count);
+#endif
+ if ((tty->count == 1) && (info->count != 1)) {
+ /*
+ * Uh, oh. tty->count is 1, which means that the tty
+ * structure will be freed. Info->count should always
+ * be one in these conditions. If it's greater than
+ * one, we've got real problems, since it means the
+ * serial port won't be shutdown.
+ */
+ printk(KERN_CRIT
+ "rs_close: bad serial port count; tty->count is 1, "
+ "info->count is %d\n", info->count);
+ info->count = 1;
+ }
+ if (--info->count < 0) {
+ printk(KERN_CRIT "rs_close: bad serial port count for ttyS%d: %d\n",
+ info->line, info->count);
+ info->count = 0;
+ }
+ if (info->count) {
+ restore_flags(flags);
+ return;
+ }
+ info->flags |= ASYNC_CLOSING;
+ /*
+ * Save the termios structure, since this port may have
+ * separate termios for callout and dialin.
+ */
+ if (info->flags & ASYNC_NORMAL_ACTIVE)
+ info->normal_termios = *tty->termios;
+ /*
+ * Now we wait for the transmit buffer to clear; and we notify
+ * the line discipline to only process XON/XOFF characters.
+ */
+ tty->closing = 1;
+ if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE)
+ tty_wait_until_sent(tty, info->closing_wait);
+ /*
+ * At this point we stop accepting input. To do this, we
+ * disable the serial receiver and the DMA receive interrupt.
+ */
+#ifdef SERIAL_HANDLE_EARLY_ERRORS
+ e100_disable_serial_data_irq(info);
+#endif
+
+#ifndef CONFIG_SVINTO_SIM
+ e100_disable_rx(info);
+ e100_disable_rx_irq(info);
+
+ if (info->flags & ASYNC_INITIALIZED) {
+ /*
+ * Before we drop DTR, make sure the UART transmitter
+ * has completely drained; this is especially
+ * important as we have a transmit FIFO!
+ */
+ rs_wait_until_sent(tty, HZ);
+ }
+#endif
+
+ shutdown(info);
+ if (tty->driver->flush_buffer)
+ tty->driver->flush_buffer(tty);
+ if (tty->ldisc.flush_buffer)
+ tty->ldisc.flush_buffer(tty);
+ tty->closing = 0;
+ info->event = 0;
+ info->tty = 0;
+ if (info->blocked_open) {
+ if (info->close_delay) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(info->close_delay);
+ }
+ wake_up_interruptible(&info->open_wait);
+ }
+ info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+ wake_up_interruptible(&info->close_wait);
+ restore_flags(flags);
+
+ /* port closed */
+
+#if defined(CONFIG_ETRAX_RS485)
+ if (info->rs485.enabled) {
+ info->rs485.enabled = 0;
+#if defined(CONFIG_ETRAX_RS485_ON_PA)
+ *R_PORT_PA_DATA = port_pa_data_shadow &= ~(1 << rs485_pa_bit);
+#endif
+#if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
+ REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
+ rs485_port_g_bit, 0);
+#endif
+#if defined(CONFIG_ETRAX_RS485_LTC1387)
+ REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
+ CONFIG_ETRAX_RS485_LTC1387_DXEN_PORT_G_BIT, 0);
+ REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
+ CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 0);
+#endif
+ }
+#endif
+}
+
+/*
+ * rs_wait_until_sent() --- wait until the transmitter is empty
+ */
+static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+ unsigned long orig_jiffies;
+ struct e100_serial *info = (struct e100_serial *)tty->driver_data;
+ unsigned long curr_time = jiffies;
+ unsigned long curr_time_usec = GET_JIFFIES_USEC();
+ long elapsed_usec =
+ (curr_time - info->last_tx_active) * (1000000/HZ) +
+ curr_time_usec - info->last_tx_active_usec;
+
+ /*
+ * Check R_DMA_CHx_STATUS bit 0-6=number of available bytes in FIFO
+ * R_DMA_CHx_HWSW bit 31-16=nbr of bytes left in DMA buffer (0=64k)
+ */
+ orig_jiffies = jiffies;
+ while (info->xmit.head != info->xmit.tail || /* More in send queue */
+ (*info->ostatusadr & 0x007f) || /* more in FIFO */
+ (elapsed_usec < 2*info->char_time_usec)) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(1);
+ if (signal_pending(current))
+ break;
+ if (timeout && time_after(jiffies, orig_jiffies + timeout))
+ break;
+ curr_time = jiffies;
+ curr_time_usec = GET_JIFFIES_USEC();
+ elapsed_usec =
+ (curr_time - info->last_tx_active) * (1000000/HZ) +
+ curr_time_usec - info->last_tx_active_usec;
+ }
+ set_current_state(TASK_RUNNING);
+}
+
+/*
+ * rs_hangup() --- called by tty_hangup() when a hangup is signaled.
+ */
+void
+rs_hangup(struct tty_struct *tty)
+{
+ struct e100_serial * info = (struct e100_serial *)tty->driver_data;
+
+ rs_flush_buffer(tty);
+ shutdown(info);
+ info->event = 0;
+ info->count = 0;
+ info->flags &= ~ASYNC_NORMAL_ACTIVE;
+ info->tty = 0;
+ wake_up_interruptible(&info->open_wait);
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_open() and friends
+ * ------------------------------------------------------------
+ */
+static int
+block_til_ready(struct tty_struct *tty, struct file * filp,
+ struct e100_serial *info)
+{
+ DECLARE_WAITQUEUE(wait, current);
+ unsigned long flags;
+ int retval;
+ int do_clocal = 0, extra_count = 0;
+
+ /*
+ * If the device is in the middle of being closed, then block
+ * until it's done, and then try again.
+ */
+ if (tty_hung_up_p(filp) ||
+ (info->flags & ASYNC_CLOSING)) {
+ if (info->flags & ASYNC_CLOSING)
+ interruptible_sleep_on(&info->close_wait);
+#ifdef SERIAL_DO_RESTART
+ if (info->flags & ASYNC_HUP_NOTIFY)
+ return -EAGAIN;
+ else
+ return -ERESTARTSYS;
+#else
+ return -EAGAIN;
+#endif
+ }
+
+ /*
+ * If non-blocking mode is set, or the port is not enabled,
+ * then make the check up front and then exit.
+ */
+ if ((filp->f_flags & O_NONBLOCK) ||
+ (tty->flags & (1 << TTY_IO_ERROR))) {
+ info->flags |= ASYNC_NORMAL_ACTIVE;
+ return 0;
+ }
+
+ if (tty->termios->c_cflag & CLOCAL) {
+ do_clocal = 1;
+ }
+
+ /*
+ * Block waiting for the carrier detect and the line to become
+ * free (i.e., not in use by the callout). While we are in
+ * this loop, info->count is dropped by one, so that
+ * rs_close() knows when to free things. We restore it upon
+ * exit, either normal or abnormal.
+ */
+ retval = 0;
+ add_wait_queue(&info->open_wait, &wait);
+#ifdef SERIAL_DEBUG_OPEN
+ printk("block_til_ready before block: ttyS%d, count = %d\n",
+ info->line, info->count);
+#endif
+ save_flags(flags);
+ cli();
+ if (!tty_hung_up_p(filp)) {
+ extra_count++;
+ info->count--;
+ }
+ restore_flags(flags);
+ info->blocked_open++;
+ while (1) {
+ save_flags(flags);
+ cli();
+ /* assert RTS and DTR */
+ e100_rts(info, 1);
+ e100_dtr(info, 1);
+ restore_flags(flags);
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (tty_hung_up_p(filp) ||
+ !(info->flags & ASYNC_INITIALIZED)) {
+#ifdef SERIAL_DO_RESTART
+ if (info->flags & ASYNC_HUP_NOTIFY)
+ retval = -EAGAIN;
+ else
+ retval = -ERESTARTSYS;
+#else
+ retval = -EAGAIN;
+#endif
+ break;
+ }
+ if (!(info->flags & ASYNC_CLOSING) && do_clocal)
+ /* && (do_clocal || DCD_IS_ASSERTED) */
+ break;
+ if (signal_pending(current)) {
+ retval = -ERESTARTSYS;
+ break;
+ }
+#ifdef SERIAL_DEBUG_OPEN
+ printk("block_til_ready blocking: ttyS%d, count = %d\n",
+ info->line, info->count);
+#endif
+ schedule();
+ }
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&info->open_wait, &wait);
+ if (extra_count)
+ info->count++;
+ info->blocked_open--;
+#ifdef SERIAL_DEBUG_OPEN
+ printk("block_til_ready after blocking: ttyS%d, count = %d\n",
+ info->line, info->count);
+#endif
+ if (retval)
+ return retval;
+ info->flags |= ASYNC_NORMAL_ACTIVE;
+ return 0;
+}
+
+/*
+ * This routine is called whenever a serial port is opened.
+ * It performs the serial-specific initialization for the tty structure.
+ */
+static int
+rs_open(struct tty_struct *tty, struct file * filp)
+{
+ struct e100_serial *info;
+ int retval, line;
+ unsigned long page;
+
+ /* find which port we want to open */
+
+ line = tty->index;
+
+ if (line < 0 || line >= NR_PORTS)
+ return -ENODEV;
+
+ /* find the corresponding e100_serial struct in the table */
+ info = rs_table + line;
+
+ /* don't allow the opening of ports that are not enabled in the HW config */
+ if (!info->enabled)
+ return -ENODEV;
+
+#ifdef SERIAL_DEBUG_OPEN
+ printk("[%d] rs_open %s, count = %d\n", current->pid, tty->name,
+ info->count);
+#endif
+
+ info->count++;
+ tty->driver_data = info;
+ info->tty = tty;
+
+ info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+
+ if (!tmp_buf) {
+ page = get_zeroed_page(GFP_KERNEL);
+ if (!page) {
+ return -ENOMEM;
+ }
+ if (tmp_buf)
+ free_page(page);
+ else
+ tmp_buf = (unsigned char *) page;
+ }
+
+ /*
+ * If the port is in the middle of closing, bail out now
+ */
+ if (tty_hung_up_p(filp) ||
+ (info->flags & ASYNC_CLOSING)) {
+ if (info->flags & ASYNC_CLOSING)
+ interruptible_sleep_on(&info->close_wait);
+#ifdef SERIAL_DO_RESTART
+ return ((info->flags & ASYNC_HUP_NOTIFY) ?
+ -EAGAIN : -ERESTARTSYS);
+#else
+ return -EAGAIN;
+#endif
+ }
+
+ /*
+ * Start up the serial port
+ */
+
+ retval = startup(info);
+ if (retval)
+ return retval;
+
+ retval = block_til_ready(tty, filp, info);
+ if (retval) {
+#ifdef SERIAL_DEBUG_OPEN
+ printk("rs_open returning after block_til_ready with %d\n",
+ retval);
+#endif
+ return retval;
+ }
+
+ if ((info->count == 1) && (info->flags & ASYNC_SPLIT_TERMIOS)) {
+ *tty->termios = info->normal_termios;
+ change_speed(info);
+ }
+
+#ifdef SERIAL_DEBUG_OPEN
+ printk("rs_open ttyS%d successful...\n", info->line);
+#endif
+ DLOG_INT_TRIG( log_int_pos = 0);
+
+ DFLIP( if (info->line == SERIAL_DEBUG_LINE) {
+ info->icount.rx = 0;
+ } );
+
+ return 0;
+}
+
+/*
+ * /proc fs routines....
+ */
+
+extern _INLINE_ int line_info(char *buf, struct e100_serial *info)
+{
+ char stat_buf[30];
+ int ret;
+ unsigned long tmp;
+
+ ret = sprintf(buf, "%d: uart:E100 port:%lX irq:%d",
+ info->line, (unsigned long)info->port, info->irq);
+
+ if (!info->port || (info->type == PORT_UNKNOWN)) {
+ ret += sprintf(buf+ret, "\n");
+ return ret;
+ }
+
+ stat_buf[0] = 0;
+ stat_buf[1] = 0;
+ if (!E100_RTS_GET(info))
+ strcat(stat_buf, "|RTS");
+ if (!E100_CTS_GET(info))
+ strcat(stat_buf, "|CTS");
+ if (!E100_DTR_GET(info))
+ strcat(stat_buf, "|DTR");
+ if (!E100_DSR_GET(info))
+ strcat(stat_buf, "|DSR");
+ if (!E100_CD_GET(info))
+ strcat(stat_buf, "|CD");
+ if (!E100_RI_GET(info))
+ strcat(stat_buf, "|RI");
+
+ ret += sprintf(buf+ret, " baud:%d", info->baud);
+
+ ret += sprintf(buf+ret, " tx:%lu rx:%lu",
+ (unsigned long)info->icount.tx,
+ (unsigned long)info->icount.rx);
+ tmp = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
+ if (tmp) {
+ ret += sprintf(buf+ret, " tx_pend:%lu/%lu",
+ (unsigned long)tmp,
+ (unsigned long)SERIAL_XMIT_SIZE);
+ }
+
+ ret += sprintf(buf+ret, " rx_pend:%lu/%lu",
+ (unsigned long)info->recv_cnt,
+ (unsigned long)info->max_recv_cnt);
+
+#if 1
+ if (info->tty) {
+
+ if (info->tty->stopped)
+ ret += sprintf(buf+ret, " stopped:%i",
+ (int)info->tty->stopped);
+ if (info->tty->hw_stopped)
+ ret += sprintf(buf+ret, " hw_stopped:%i",
+ (int)info->tty->hw_stopped);
+ }
+
+ {
+ unsigned char rstat = info->port[REG_STATUS];
+ if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) )
+ ret += sprintf(buf+ret, " xoff_detect:1");
+ }
+
+#endif
+
+
+
+
+ if (info->icount.frame)
+ ret += sprintf(buf+ret, " fe:%lu",
+ (unsigned long)info->icount.frame);
+
+ if (info->icount.parity)
+ ret += sprintf(buf+ret, " pe:%lu",
+ (unsigned long)info->icount.parity);
+
+ if (info->icount.brk)
+ ret += sprintf(buf+ret, " brk:%lu",
+ (unsigned long)info->icount.brk);
+
+ if (info->icount.overrun)
+ ret += sprintf(buf+ret, " oe:%lu",
+ (unsigned long)info->icount.overrun);
+
+ /*
+ * Last thing is the RS-232 status lines
+ */
+ ret += sprintf(buf+ret, " %s\n", stat_buf+1);
+ return ret;
+}
+
+int rs_read_proc(char *page, char **start, off_t off, int count,
+ int *eof, void *data)
+{
+ int i, len = 0, l;
+ off_t begin = 0;
+
+ len += sprintf(page, "serinfo:1.0 driver:%s\n",
+ serial_version);
+ for (i = 0; i < NR_PORTS && len < 4000; i++) {
+ if (!rs_table[i].enabled)
+ continue;
+ l = line_info(page + len, &rs_table[i]);
+ len += l;
+ if (len+begin > off+count)
+ goto done;
+ if (len+begin < off) {
+ begin += len;
+ len = 0;
+ }
+ }
+#ifdef DEBUG_LOG_INCLUDED
+ for (i = 0; i < debug_log_pos; i++) {
+ len += sprintf(page + len, "%-4i %lu.%lu ", i, debug_log[i].time, timer_data_to_ns(debug_log[i].timer_data));
+ len += sprintf(page + len, debug_log[i].string, debug_log[i].value);
+ if (len+begin > off+count)
+ goto done;
+ if (len+begin < off) {
+ begin += len;
+ len = 0;
+ }
+ }
+ len += sprintf(page + len, "debug_log %i/%i %li bytes\n",
+ i, DEBUG_LOG_SIZE, begin+len);
+ debug_log_pos = 0;
+#endif
+
+ *eof = 1;
+done:
+ if (off >= len+begin)
+ return 0;
+ *start = page + (off-begin);
+ return ((count < begin+len-off) ? count : begin+len-off);
+}
+
+/* Finally, routines used to initialize the serial driver. */
+
+static void
+show_serial_version(void)
+{
+ printk(KERN_INFO
+ "ETRAX 100LX serial-driver %s, (c) 2000-2004 Axis Communications AB\r\n",
+ &serial_version[11]); /* "$Revision: x.yy" */
+}
+
+/* rs_init inits the driver at boot (using the module_init chain) */
+
+static struct tty_operations rs_ops = {
+ .open = rs_open,
+ .close = rs_close,
+ .write = rs_write,
+ .flush_chars = rs_flush_chars,
+ .write_room = rs_write_room,
+ .chars_in_buffer = rs_chars_in_buffer,
+ .flush_buffer = rs_flush_buffer,
+ .ioctl = rs_ioctl,
+ .throttle = rs_throttle,
+ .unthrottle = rs_unthrottle,
+ .set_termios = rs_set_termios,
+ .stop = rs_stop,
+ .start = rs_start,
+ .hangup = rs_hangup,
+ .break_ctl = rs_break,
+ .send_xchar = rs_send_xchar,
+ .wait_until_sent = rs_wait_until_sent,
+ .read_proc = rs_read_proc,
+};
+
+static int __init
+rs_init(void)
+{
+ int i;
+ struct e100_serial *info;
+ struct tty_driver *driver = alloc_tty_driver(NR_PORTS);
+
+ if (!driver)
+ return -ENOMEM;
+
+ show_serial_version();
+
+ /* Setup the timed flush handler system */
+
+#if !defined(CONFIG_ETRAX_SERIAL_FAST_TIMER)
+ init_timer(&flush_timer);
+ flush_timer.function = timed_flush_handler;
+ mod_timer(&flush_timer, jiffies + CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS);
+#endif
+
+ /* Initialize the tty_driver structure */
+
+ driver->driver_name = "serial";
+ driver->name = "ttyS";
+ driver->major = TTY_MAJOR;
+ driver->minor_start = 64;
+ driver->type = TTY_DRIVER_TYPE_SERIAL;
+ driver->subtype = SERIAL_TYPE_NORMAL;
+ driver->init_termios = tty_std_termios;
+ driver->init_termios.c_cflag =
+ B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */
+ driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS;
+ driver->termios = serial_termios;
+ driver->termios_locked = serial_termios_locked;
+
+ tty_set_operations(driver, &rs_ops);
+ serial_driver = driver;
+ if (tty_register_driver(driver))
+ panic("Couldn't register serial driver\n");
+ /* do some initializing for the separate ports */
+
+ for (i = 0, info = rs_table; i < NR_PORTS; i++,info++) {
+ info->uses_dma_in = 0;
+ info->uses_dma_out = 0;
+ info->line = i;
+ info->tty = 0;
+ info->type = PORT_ETRAX;
+ info->tr_running = 0;
+ info->forced_eop = 0;
+ info->baud_base = DEF_BAUD_BASE;
+ info->custom_divisor = 0;
+ info->flags = 0;
+ info->close_delay = 5*HZ/10;
+ info->closing_wait = 30*HZ;
+ info->x_char = 0;
+ info->event = 0;
+ info->count = 0;
+ info->blocked_open = 0;
+ info->normal_termios = driver->init_termios;
+ init_waitqueue_head(&info->open_wait);
+ init_waitqueue_head(&info->close_wait);
+ info->xmit.buf = NULL;
+ info->xmit.tail = info->xmit.head = 0;
+ info->first_recv_buffer = info->last_recv_buffer = NULL;
+ info->recv_cnt = info->max_recv_cnt = 0;
+ info->last_tx_active_usec = 0;
+ info->last_tx_active = 0;
+
+#if defined(CONFIG_ETRAX_RS485)
+ /* Set sane defaults */
+ info->rs485.rts_on_send = 0;
+ info->rs485.rts_after_sent = 1;
+ info->rs485.delay_rts_before_send = 0;
+ info->rs485.enabled = 0;
+#endif
+ INIT_WORK(&info->work, do_softint, info);
+
+ if (info->enabled) {
+ printk(KERN_INFO "%s%d at 0x%x is a builtin UART with DMA\n",
+ serial_driver->name, info->line, (unsigned int)info->port);
+ }
+ }
+#ifdef CONFIG_ETRAX_FAST_TIMER
+#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
+ memset(fast_timers, 0, sizeof(fast_timers));
+#endif
+#ifdef CONFIG_ETRAX_RS485
+ memset(fast_timers_rs485, 0, sizeof(fast_timers_rs485));
+#endif
+ fast_timer_init();
+#endif
+
+#ifndef CONFIG_SVINTO_SIM
+ /* Not needed in simulator. May only complicate stuff. */
+ /* hook the irq's for DMA channel 6 and 7, serial output and input, and some more... */
+
+ if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial ", NULL))
+ panic("irq8");
+
+#ifdef CONFIG_ETRAX_SERIAL_PORT0
+#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT
+ if (request_irq(SER0_DMA_TX_IRQ_NBR, tr_interrupt, SA_INTERRUPT, "serial 0 dma tr", NULL))
+ panic("irq22");
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN
+ if (request_irq(SER0_DMA_RX_IRQ_NBR, rec_interrupt, SA_INTERRUPT, "serial 0 dma rec", NULL))
+ panic("irq23");
+#endif
+#endif
+
+#ifdef CONFIG_ETRAX_SERIAL_PORT1
+#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT
+ if (request_irq(SER1_DMA_TX_IRQ_NBR, tr_interrupt, SA_INTERRUPT, "serial 1 dma tr", NULL))
+ panic("irq24");
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN
+ if (request_irq(SER1_DMA_RX_IRQ_NBR, rec_interrupt, SA_INTERRUPT, "serial 1 dma rec", NULL))
+ panic("irq25");
+#endif
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT2
+ /* DMA Shared with par0 (and SCSI0 and ATA) */
+#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT
+ if (request_irq(SER2_DMA_TX_IRQ_NBR, tr_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 2 dma tr", NULL))
+ panic("irq18");
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN
+ if (request_irq(SER2_DMA_RX_IRQ_NBR, rec_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 2 dma rec", NULL))
+ panic("irq19");
+#endif
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT3
+ /* DMA Shared with par1 (and SCSI1 and Extern DMA 0) */
+#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT
+ if (request_irq(SER3_DMA_TX_IRQ_NBR, tr_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 3 dma tr", NULL))
+ panic("irq20");
+#endif
+#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN
+ if (request_irq(SER3_DMA_RX_IRQ_NBR, rec_interrupt, SA_SHIRQ | SA_INTERRUPT, "serial 3 dma rec", NULL))
+ panic("irq21");
+#endif
+#endif
+
+#ifdef CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST
+ if (request_irq(TIMER1_IRQ_NBR, timeout_interrupt, SA_SHIRQ | SA_INTERRUPT,
+ "fast serial dma timeout", NULL)) {
+ printk(KERN_CRIT "err: timer1 irq\n");
+ }
+#endif
+#endif /* CONFIG_SVINTO_SIM */
+ debug_write_function = rs_debug_write_function;
+ return 0;
+}
+
+/* this makes sure that rs_init is called during kernel boot */
+
+module_init(rs_init);
+
+/*
+ * register_serial and unregister_serial allows for serial ports to be
+ * configured at run-time, to support PCMCIA modems.
+ */
+int
+register_serial(struct serial_struct *req)
+{
+ return -1;
+}
+
+void unregister_serial(int line)
+{
+}
diff --git a/drivers/serial/crisv10.h b/drivers/serial/crisv10.h
new file mode 100644
index 00000000000..1800c0e7531
--- /dev/null
+++ b/drivers/serial/crisv10.h
@@ -0,0 +1,137 @@
+/*
+ * serial.h: Arch-dep definitions for the Etrax100 serial driver.
+ *
+ * Copyright (C) 1998, 1999, 2000 Axis Communications AB
+ */
+
+#ifndef _ETRAX_SERIAL_H
+#define _ETRAX_SERIAL_H
+
+#include <linux/config.h>
+#include <linux/circ_buf.h>
+#include <asm/termios.h>
+
+/* Software state per channel */
+
+#ifdef __KERNEL__
+/*
+ * This is our internal structure for each serial port's state.
+ *
+ * Many fields are paralleled by the structure used by the serial_struct
+ * structure.
+ *
+ * For definitions of the flags field, see tty.h
+ */
+
+#define SERIAL_RECV_DESCRIPTORS 8
+
+struct etrax_recv_buffer {
+ struct etrax_recv_buffer *next;
+ unsigned short length;
+ unsigned char error;
+ unsigned char pad;
+
+ unsigned char buffer[0];
+};
+
+struct e100_serial {
+ int baud;
+ volatile u8 *port; /* R_SERIALx_CTRL */
+ u32 irq; /* bitnr in R_IRQ_MASK2 for dmaX_descr */
+
+ /* Output registers */
+ volatile u8 *oclrintradr; /* adr to R_DMA_CHx_CLR_INTR */
+ volatile u32 *ofirstadr; /* adr to R_DMA_CHx_FIRST */
+ volatile u8 *ocmdadr; /* adr to R_DMA_CHx_CMD */
+ const volatile u8 *ostatusadr; /* adr to R_DMA_CHx_STATUS */
+
+ /* Input registers */
+ volatile u8 *iclrintradr; /* adr to R_DMA_CHx_CLR_INTR */
+ volatile u32 *ifirstadr; /* adr to R_DMA_CHx_FIRST */
+ volatile u8 *icmdadr; /* adr to R_DMA_CHx_CMD */
+ volatile u32 *idescradr; /* adr to R_DMA_CHx_DESCR */
+
+ int flags; /* defined in tty.h */
+
+ u8 rx_ctrl; /* shadow for R_SERIALx_REC_CTRL */
+ u8 tx_ctrl; /* shadow for R_SERIALx_TR_CTRL */
+ u8 iseteop; /* bit number for R_SET_EOP for the input dma */
+ int enabled; /* Set to 1 if the port is enabled in HW config */
+
+ u8 dma_out_enabled:1; /* Set to 1 if DMA should be used */
+ u8 dma_in_enabled:1; /* Set to 1 if DMA should be used */
+
+ /* end of fields defined in rs_table[] in .c-file */
+ u8 uses_dma_in; /* Set to 1 if DMA is used */
+ u8 uses_dma_out; /* Set to 1 if DMA is used */
+ u8 forced_eop; /* a fifo eop has been forced */
+ int baud_base; /* For special baudrates */
+ int custom_divisor; /* For special baudrates */
+ struct etrax_dma_descr tr_descr;
+ struct etrax_dma_descr rec_descr[SERIAL_RECV_DESCRIPTORS];
+ int cur_rec_descr;
+
+ volatile int tr_running; /* 1 if output is running */
+
+ struct tty_struct *tty;
+ int read_status_mask;
+ int ignore_status_mask;
+ int x_char; /* xon/xoff character */
+ int close_delay;
+ unsigned short closing_wait;
+ unsigned short closing_wait2;
+ unsigned long event;
+ unsigned long last_active;
+ int line;
+ int type; /* PORT_ETRAX */
+ int count; /* # of fd on device */
+ int blocked_open; /* # of blocked opens */
+ struct circ_buf xmit;
+ struct etrax_recv_buffer *first_recv_buffer;
+ struct etrax_recv_buffer *last_recv_buffer;
+ unsigned int recv_cnt;
+ unsigned int max_recv_cnt;
+
+ struct work_struct work;
+ struct async_icount icount; /* error-statistics etc.*/
+ struct termios normal_termios;
+ struct termios callout_termios;
+#ifdef DECLARE_WAITQUEUE
+ wait_queue_head_t open_wait;
+ wait_queue_head_t close_wait;
+#else
+ struct wait_queue *open_wait;
+ struct wait_queue *close_wait;
+#endif
+
+ unsigned long char_time_usec; /* The time for 1 char, in usecs */
+ unsigned long flush_time_usec; /* How often we should flush */
+ unsigned long last_tx_active_usec; /* Last tx usec in the jiffies */
+ unsigned long last_tx_active; /* Last tx time in jiffies */
+ unsigned long last_rx_active_usec; /* Last rx usec in the jiffies */
+ unsigned long last_rx_active; /* Last rx time in jiffies */
+
+ int break_detected_cnt;
+ int errorcode;
+
+#ifdef CONFIG_ETRAX_RS485
+ struct rs485_control rs485; /* RS-485 support */
+#endif
+};
+
+/* this PORT is not in the standard serial.h. it's not actually used for
+ * anything since we only have one type of async serial-port anyway in this
+ * system.
+ */
+
+#define PORT_ETRAX 1
+
+/*
+ * Events are used to schedule things to happen at timer-interrupt
+ * time, instead of at rs interrupt time.
+ */
+#define RS_EVENT_WRITE_WAKEUP 0
+
+#endif /* __KERNEL__ */
+
+#endif /* !_ETRAX_SERIAL_H */
diff --git a/drivers/serial/dz.c b/drivers/serial/dz.c
new file mode 100644
index 00000000000..97824eeeafa
--- /dev/null
+++ b/drivers/serial/dz.c
@@ -0,0 +1,822 @@
+/*
+ * dz.c: Serial port driver for DECStations equiped
+ * with the DZ chipset.
+ *
+ * Copyright (C) 1998 Olivier A. D. Lebaillif
+ *
+ * Email: olivier.lebaillif@ifrsys.com
+ *
+ * [31-AUG-98] triemer
+ * Changed IRQ to use Harald's dec internals interrupts.h
+ * removed base_addr code - moving address assignment to setup.c
+ * Changed name of dz_init to rs_init to be consistent with tc code
+ * [13-NOV-98] triemer fixed code to receive characters
+ * after patches by harald to irq code.
+ * [09-JAN-99] triemer minor fix for schedule - due to removal of timeout
+ * field from "current" - somewhere between 2.1.121 and 2.1.131
+ Qua Jun 27 15:02:26 BRT 2001
+ * [27-JUN-2001] Arnaldo Carvalho de Melo <acme@conectiva.com.br> - cleanups
+ *
+ * Parts (C) 1999 David Airlie, airlied@linux.ie
+ * [07-SEP-99] Bugfixes
+ *
+ * [06-Jan-2002] Russell King <rmk@arm.linux.org.uk>
+ * Converted to new serial core
+ */
+
+#undef DEBUG_DZ
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/bootinfo.h>
+#include <asm/dec/interrupts.h>
+#include <asm/dec/kn01.h>
+#include <asm/dec/kn02.h>
+#include <asm/dec/machtype.h>
+#include <asm/dec/prom.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+
+#define CONSOLE_LINE (3) /* for definition of struct console */
+
+#include "dz.h"
+
+#define DZ_INTR_DEBUG 1
+
+static char *dz_name = "DECstation DZ serial driver version ";
+static char *dz_version = "1.02";
+
+struct dz_port {
+ struct uart_port port;
+ unsigned int cflag;
+};
+
+static struct dz_port dz_ports[DZ_NB_PORT];
+
+#ifdef DEBUG_DZ
+/*
+ * debugging code to send out chars via prom
+ */
+static void debug_console(const char *s, int count)
+{
+ unsigned i;
+
+ for (i = 0; i < count; i++) {
+ if (*s == 10)
+ prom_printf("%c", 13);
+ prom_printf("%c", *s++);
+ }
+}
+#endif
+
+/*
+ * ------------------------------------------------------------
+ * dz_in () and dz_out ()
+ *
+ * These routines are used to access the registers of the DZ
+ * chip, hiding relocation differences between implementation.
+ * ------------------------------------------------------------
+ */
+
+static inline unsigned short dz_in(struct dz_port *dport, unsigned offset)
+{
+ volatile unsigned short *addr =
+ (volatile unsigned short *) (dport->port.membase + offset);
+ return *addr;
+}
+
+static inline void dz_out(struct dz_port *dport, unsigned offset,
+ unsigned short value)
+{
+ volatile unsigned short *addr =
+ (volatile unsigned short *) (dport->port.membase + offset);
+ *addr = value;
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_stop () and rs_start ()
+ *
+ * These routines are called before setting or resetting
+ * tty->stopped. They enable or disable transmitter interrupts,
+ * as necessary.
+ * ------------------------------------------------------------
+ */
+
+static void dz_stop_tx(struct uart_port *uport, unsigned int tty_stop)
+{
+ struct dz_port *dport = (struct dz_port *)uport;
+ unsigned short tmp, mask = 1 << dport->port.line;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dport->port.lock, flags);
+ tmp = dz_in(dport, DZ_TCR); /* read the TX flag */
+ tmp &= ~mask; /* clear the TX flag */
+ dz_out(dport, DZ_TCR, tmp);
+ spin_unlock_irqrestore(&dport->port.lock, flags);
+}
+
+static void dz_start_tx(struct uart_port *uport, unsigned int tty_start)
+{
+ struct dz_port *dport = (struct dz_port *)uport;
+ unsigned short tmp, mask = 1 << dport->port.line;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dport->port.lock, flags);
+ tmp = dz_in(dport, DZ_TCR); /* read the TX flag */
+ tmp |= mask; /* set the TX flag */
+ dz_out(dport, DZ_TCR, tmp);
+ spin_unlock_irqrestore(&dport->port.lock, flags);
+}
+
+static void dz_stop_rx(struct uart_port *uport)
+{
+ struct dz_port *dport = (struct dz_port *)uport;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dport->port.lock, flags);
+ dport->cflag &= ~DZ_CREAD;
+ dz_out(dport, DZ_LPR, dport->cflag);
+ spin_unlock_irqrestore(&dport->port.lock, flags);
+}
+
+static void dz_enable_ms(struct uart_port *port)
+{
+ /* nothing to do */
+}
+
+/*
+ * ------------------------------------------------------------
+ * Here starts the interrupt handling routines. All of the
+ * following subroutines are declared as inline and are folded
+ * into dz_interrupt. They were separated out for readability's
+ * sake.
+ *
+ * Note: rs_interrupt() is a "fast" interrupt, which means that it
+ * runs with interrupts turned off. People who may want to modify
+ * rs_interrupt() should try to keep the interrupt handler as fast as
+ * possible. After you are done making modifications, it is not a bad
+ * idea to do:
+ *
+ * make drivers/serial/dz.s
+ *
+ * and look at the resulting assemble code in dz.s.
+ *
+ * ------------------------------------------------------------
+ */
+
+/*
+ * ------------------------------------------------------------
+ * receive_char ()
+ *
+ * This routine deals with inputs from any lines.
+ * ------------------------------------------------------------
+ */
+static inline void dz_receive_chars(struct dz_port *dport)
+{
+ struct tty_struct *tty = NULL;
+ struct uart_icount *icount;
+ int ignore = 0;
+ unsigned short status, tmp;
+ unsigned char ch, flag;
+
+ /* this code is going to be a problem...
+ the call to tty_flip_buffer is going to need
+ to be rethought...
+ */
+ do {
+ status = dz_in(dport, DZ_RBUF);
+
+ /* punt so we don't get duplicate characters */
+ if (!(status & DZ_DVAL))
+ goto ignore_char;
+
+
+ ch = UCHAR(status); /* grab the char */
+ flag = TTY_NORMAL;
+
+#if 0
+ if (info->is_console) {
+ if (ch == 0)
+ return; /* it's a break ... */
+ }
+#endif
+
+ tty = dport->port.info->tty;/* now tty points to the proper dev */
+ icount = &dport->port.icount;
+
+ if (!tty)
+ break;
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+ break;
+
+ icount->rx++;
+
+ /* keep track of the statistics */
+ if (status & (DZ_OERR | DZ_FERR | DZ_PERR)) {
+ if (status & DZ_PERR) /* parity error */
+ icount->parity++;
+ else if (status & DZ_FERR) /* frame error */
+ icount->frame++;
+ if (status & DZ_OERR) /* overrun error */
+ icount->overrun++;
+
+ /* check to see if we should ignore the character
+ and mask off conditions that should be ignored
+ */
+
+ if (status & dport->port.ignore_status_mask) {
+ if (++ignore > 100)
+ break;
+ goto ignore_char;
+ }
+ /* mask off the error conditions we want to ignore */
+ tmp = status & dport->port.read_status_mask;
+
+ if (tmp & DZ_PERR) {
+ flag = TTY_PARITY;
+#ifdef DEBUG_DZ
+ debug_console("PERR\n", 5);
+#endif
+ } else if (tmp & DZ_FERR) {
+ flag = TTY_FRAME;
+#ifdef DEBUG_DZ
+ debug_console("FERR\n", 5);
+#endif
+ }
+ if (tmp & DZ_OERR) {
+#ifdef DEBUG_DZ
+ debug_console("OERR\n", 5);
+#endif
+ tty_insert_flip_char(tty, ch, flag);
+ ch = 0;
+ flag = TTY_OVERRUN;
+ }
+ }
+ tty_insert_flip_char(tty, ch, flag);
+ ignore_char:
+ } while (status & DZ_DVAL);
+
+ if (tty)
+ tty_flip_buffer_push(tty);
+}
+
+/*
+ * ------------------------------------------------------------
+ * transmit_char ()
+ *
+ * This routine deals with outputs to any lines.
+ * ------------------------------------------------------------
+ */
+static inline void dz_transmit_chars(struct dz_port *dport)
+{
+ struct circ_buf *xmit = &dport->port.info->xmit;
+ unsigned char tmp;
+
+ if (dport->port.x_char) { /* XON/XOFF chars */
+ dz_out(dport, DZ_TDR, dport->port.x_char);
+ dport->port.icount.tx++;
+ dport->port.x_char = 0;
+ return;
+ }
+ /* if nothing to do or stopped or hardware stopped */
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&dport->port)) {
+ dz_stop_tx(&dport->port, 0);
+ return;
+ }
+
+ /*
+ * if something to do ... (rember the dz has no output fifo so we go
+ * one char at a time :-<
+ */
+ tmp = xmit->buf[xmit->tail];
+ xmit->tail = (xmit->tail + 1) & (DZ_XMIT_SIZE - 1);
+ dz_out(dport, DZ_TDR, tmp);
+ dport->port.icount.tx++;
+
+ if (uart_circ_chars_pending(xmit) < DZ_WAKEUP_CHARS)
+ uart_write_wakeup(&dport->port);
+
+ /* Are we done */
+ if (uart_circ_empty(xmit))
+ dz_stop_tx(&dport->port, 0);
+}
+
+/*
+ * ------------------------------------------------------------
+ * check_modem_status ()
+ *
+ * Only valid for the MODEM line duh !
+ * ------------------------------------------------------------
+ */
+static inline void check_modem_status(struct dz_port *dport)
+{
+ unsigned short status;
+
+ /* if not ne modem line just return */
+ if (dport->port.line != DZ_MODEM)
+ return;
+
+ status = dz_in(dport, DZ_MSR);
+
+ /* it's easy, since DSR2 is the only bit in the register */
+ if (status)
+ dport->port.icount.dsr++;
+}
+
+/*
+ * ------------------------------------------------------------
+ * dz_interrupt ()
+ *
+ * this is the main interrupt routine for the DZ chip.
+ * It deals with the multiple ports.
+ * ------------------------------------------------------------
+ */
+static irqreturn_t dz_interrupt(int irq, void *dev, struct pt_regs *regs)
+{
+ struct dz_port *dport;
+ unsigned short status;
+
+ /* get the reason why we just got an irq */
+ status = dz_in((struct dz_port *)dev, DZ_CSR);
+ dport = &dz_ports[LINE(status)];
+
+ if (status & DZ_RDONE)
+ dz_receive_chars(dport);
+
+ if (status & DZ_TRDY)
+ dz_transmit_chars(dport);
+
+ /* FIXME: what about check modem status??? --rmk */
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * -------------------------------------------------------------------
+ * Here ends the DZ interrupt routines.
+ * -------------------------------------------------------------------
+ */
+
+static unsigned int dz_get_mctrl(struct uart_port *uport)
+{
+ struct dz_port *dport = (struct dz_port *)uport;
+ unsigned int mctrl = TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+
+ if (dport->port.line == DZ_MODEM) {
+ /*
+ * CHECKME: This is a guess from the other code... --rmk
+ */
+ if (dz_in(dport, DZ_MSR) & DZ_MODEM_DSR)
+ mctrl &= ~TIOCM_DSR;
+ }
+
+ return mctrl;
+}
+
+static void dz_set_mctrl(struct uart_port *uport, unsigned int mctrl)
+{
+ struct dz_port *dport = (struct dz_port *)uport;
+ unsigned short tmp;
+
+ if (dport->port.line == DZ_MODEM) {
+ tmp = dz_in(dport, DZ_TCR);
+ if (mctrl & TIOCM_DTR)
+ tmp &= ~DZ_MODEM_DTR;
+ else
+ tmp |= DZ_MODEM_DTR;
+ dz_out(dport, DZ_TCR, tmp);
+ }
+}
+
+/*
+ * -------------------------------------------------------------------
+ * startup ()
+ *
+ * various initialization tasks
+ * -------------------------------------------------------------------
+ */
+static int dz_startup(struct uart_port *uport)
+{
+ struct dz_port *dport = (struct dz_port *)uport;
+ unsigned long flags;
+ unsigned short tmp;
+
+ /* The dz lines for the mouse/keyboard must be
+ * opened using their respective drivers.
+ */
+ if ((dport->port.line == DZ_KEYBOARD) ||
+ (dport->port.line == DZ_MOUSE))
+ return -ENODEV;
+
+ spin_lock_irqsave(&dport->port.lock, flags);
+
+ /* enable the interrupt and the scanning */
+ tmp = dz_in(dport, DZ_CSR);
+ tmp |= DZ_RIE | DZ_TIE | DZ_MSE;
+ dz_out(dport, DZ_CSR, tmp);
+
+ spin_unlock_irqrestore(&dport->port.lock, flags);
+
+ return 0;
+}
+
+/*
+ * -------------------------------------------------------------------
+ * shutdown ()
+ *
+ * This routine will shutdown a serial port; interrupts are disabled, and
+ * DTR is dropped if the hangup on close termio flag is on.
+ * -------------------------------------------------------------------
+ */
+static void dz_shutdown(struct uart_port *uport)
+{
+ dz_stop_tx(uport, 0);
+}
+
+/*
+ * get_lsr_info - get line status register info
+ *
+ * Purpose: Let user call ioctl() to get info when the UART physically
+ * is emptied. On bus types like RS485, the transmitter must
+ * release the bus after transmitting. This must be done when
+ * the transmit shift register is empty, not be done when the
+ * transmit holding register is empty. This functionality
+ * allows an RS485 driver to be written in user space.
+ */
+static unsigned int dz_tx_empty(struct uart_port *uport)
+{
+ struct dz_port *dport = (struct dz_port *)uport;
+ unsigned short status = dz_in(dport, DZ_LPR);
+
+ /* FIXME: this appears to be obviously broken --rmk. */
+ return status ? TIOCSER_TEMT : 0;
+}
+
+static void dz_break_ctl(struct uart_port *uport, int break_state)
+{
+ struct dz_port *dport = (struct dz_port *)uport;
+ unsigned long flags;
+ unsigned short tmp, mask = 1 << uport->line;
+
+ spin_lock_irqsave(&uport->lock, flags);
+ tmp = dz_in(dport, DZ_TCR);
+ if (break_state)
+ tmp |= mask;
+ else
+ tmp &= ~mask;
+ dz_out(dport, DZ_TCR, tmp);
+ spin_unlock_irqrestore(&uport->lock, flags);
+}
+
+static void dz_set_termios(struct uart_port *uport, struct termios *termios,
+ struct termios *old_termios)
+{
+ struct dz_port *dport = (struct dz_port *)uport;
+ unsigned long flags;
+ unsigned int cflag, baud;
+
+ cflag = dport->port.line;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ cflag |= DZ_CS5;
+ break;
+ case CS6:
+ cflag |= DZ_CS6;
+ break;
+ case CS7:
+ cflag |= DZ_CS7;
+ break;
+ case CS8:
+ default:
+ cflag |= DZ_CS8;
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ cflag |= DZ_CSTOPB;
+ if (termios->c_cflag & PARENB)
+ cflag |= DZ_PARENB;
+ if (termios->c_cflag & PARODD)
+ cflag |= DZ_PARODD;
+
+ baud = uart_get_baud_rate(uport, termios, old_termios, 50, 9600);
+ switch (baud) {
+ case 50:
+ cflag |= DZ_B50;
+ break;
+ case 75:
+ cflag |= DZ_B75;
+ break;
+ case 110:
+ cflag |= DZ_B110;
+ break;
+ case 134:
+ cflag |= DZ_B134;
+ break;
+ case 150:
+ cflag |= DZ_B150;
+ break;
+ case 300:
+ cflag |= DZ_B300;
+ break;
+ case 600:
+ cflag |= DZ_B600;
+ break;
+ case 1200:
+ cflag |= DZ_B1200;
+ break;
+ case 1800:
+ cflag |= DZ_B1800;
+ break;
+ case 2000:
+ cflag |= DZ_B2000;
+ break;
+ case 2400:
+ cflag |= DZ_B2400;
+ break;
+ case 3600:
+ cflag |= DZ_B3600;
+ break;
+ case 4800:
+ cflag |= DZ_B4800;
+ break;
+ case 7200:
+ cflag |= DZ_B7200;
+ break;
+ case 9600:
+ default:
+ cflag |= DZ_B9600;
+ }
+
+ if (termios->c_cflag & CREAD)
+ cflag |= DZ_RXENAB;
+
+ spin_lock_irqsave(&dport->port.lock, flags);
+
+ dz_out(dport, DZ_LPR, cflag);
+ dport->cflag = cflag;
+
+ /* setup accept flag */
+ dport->port.read_status_mask = DZ_OERR;
+ if (termios->c_iflag & INPCK)
+ dport->port.read_status_mask |= DZ_FERR | DZ_PERR;
+
+ /* characters to ignore */
+ uport->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ dport->port.ignore_status_mask |= DZ_FERR | DZ_PERR;
+
+ spin_unlock_irqrestore(&dport->port.lock, flags);
+}
+
+static const char *dz_type(struct uart_port *port)
+{
+ return "DZ";
+}
+
+static void dz_release_port(struct uart_port *port)
+{
+ /* nothing to do */
+}
+
+static int dz_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+static void dz_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE)
+ port->type = PORT_DZ;
+}
+
+/*
+ * verify the new serial_struct (for TIOCSSERIAL).
+ */
+static int dz_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ int ret = 0;
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_DZ)
+ ret = -EINVAL;
+ if (ser->irq != port->irq)
+ ret = -EINVAL;
+ return ret;
+}
+
+static struct uart_ops dz_ops = {
+ .tx_empty = dz_tx_empty,
+ .get_mctrl = dz_get_mctrl,
+ .set_mctrl = dz_set_mctrl,
+ .stop_tx = dz_stop_tx,
+ .start_tx = dz_start_tx,
+ .stop_rx = dz_stop_rx,
+ .enable_ms = dz_enable_ms,
+ .break_ctl = dz_break_ctl,
+ .startup = dz_startup,
+ .shutdown = dz_shutdown,
+ .set_termios = dz_set_termios,
+ .type = dz_type,
+ .release_port = dz_release_port,
+ .request_port = dz_request_port,
+ .config_port = dz_config_port,
+ .verify_port = dz_verify_port,
+};
+
+static void __init dz_init_ports(void)
+{
+ static int first = 1;
+ struct dz_port *dport;
+ unsigned long base;
+ int i;
+
+ if (!first)
+ return;
+ first = 0;
+
+ if (mips_machtype == MACH_DS23100 ||
+ mips_machtype == MACH_DS5100)
+ base = (unsigned long) KN01_DZ11_BASE;
+ else
+ base = (unsigned long) KN02_DZ11_BASE;
+
+ for (i = 0, dport = dz_ports; i < DZ_NB_PORT; i++, dport++) {
+ spin_lock_init(&dport->port.lock);
+ dport->port.membase = (char *) base;
+ dport->port.iotype = SERIAL_IO_PORT;
+ dport->port.irq = dec_interrupt[DEC_IRQ_DZ11];
+ dport->port.line = i;
+ dport->port.fifosize = 1;
+ dport->port.ops = &dz_ops;
+ dport->port.flags = UPF_BOOT_AUTOCONF;
+ }
+}
+
+static void dz_reset(struct dz_port *dport)
+{
+ dz_out(dport, DZ_CSR, DZ_CLR);
+
+ while (dz_in(dport, DZ_CSR) & DZ_CLR);
+ /* FIXME: cpu_relax? */
+
+ iob();
+
+ /* enable scanning */
+ dz_out(dport, DZ_CSR, DZ_MSE);
+}
+
+#ifdef CONFIG_SERIAL_DZ_CONSOLE
+static void dz_console_put_char(struct dz_port *dport, unsigned char ch)
+{
+ unsigned long flags;
+ int loops = 2500;
+ unsigned short tmp = ch;
+ /* this code sends stuff out to serial device - spinning its
+ wheels and waiting. */
+
+ spin_lock_irqsave(&dport->port.lock, flags);
+
+ /* spin our wheels */
+ while (((dz_in(dport, DZ_CSR) & DZ_TRDY) != DZ_TRDY) && loops--)
+ /* FIXME: cpu_relax, udelay? --rmk */
+ ;
+
+ /* Actually transmit the character. */
+ dz_out(dport, DZ_TDR, tmp);
+
+ spin_unlock_irqrestore(&dport->port.lock, flags);
+}
+/*
+ * -------------------------------------------------------------------
+ * dz_console_print ()
+ *
+ * dz_console_print is registered for printk.
+ * The console must be locked when we get here.
+ * -------------------------------------------------------------------
+ */
+static void dz_console_print(struct console *cons,
+ const char *str,
+ unsigned int count)
+{
+ struct dz_port *dport = &dz_ports[CONSOLE_LINE];
+#ifdef DEBUG_DZ
+ prom_printf((char *) str);
+#endif
+ while (count--) {
+ if (*str == '\n')
+ dz_console_put_char(dport, '\r');
+ dz_console_put_char(dport, *str++);
+ }
+}
+
+static int __init dz_console_setup(struct console *co, char *options)
+{
+ struct dz_port *dport = &dz_ports[CONSOLE_LINE];
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+ int ret;
+ unsigned short mask, tmp;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ dz_reset(dport);
+
+ ret = uart_set_options(&dport->port, co, baud, parity, bits, flow);
+ if (ret == 0) {
+ mask = 1 << dport->port.line;
+ tmp = dz_in(dport, DZ_TCR); /* read the TX flag */
+ if (!(tmp & mask)) {
+ tmp |= mask; /* set the TX flag */
+ dz_out(dport, DZ_TCR, tmp);
+ }
+ }
+
+ return ret;
+}
+
+static struct console dz_sercons =
+{
+ .name = "ttyS",
+ .write = dz_console_print,
+ .device = uart_console_device,
+ .setup = dz_console_setup,
+ .flags = CON_CONSDEV | CON_PRINTBUFFER,
+ .index = CONSOLE_LINE,
+};
+
+void __init dz_serial_console_init(void)
+{
+ dz_init_ports();
+
+ register_console(&dz_sercons);
+}
+
+#define SERIAL_DZ_CONSOLE &dz_sercons
+#else
+#define SERIAL_DZ_CONSOLE NULL
+#endif /* CONFIG_SERIAL_DZ_CONSOLE */
+
+static struct uart_driver dz_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "serial",
+#ifdef CONFIG_DEVFS
+ .dev_name = "tts/%d",
+#else
+ .dev_name = "ttyS%d",
+#endif
+ .major = TTY_MAJOR,
+ .minor = 64,
+ .nr = DZ_NB_PORT,
+ .cons = SERIAL_DZ_CONSOLE,
+};
+
+int __init dz_init(void)
+{
+ unsigned long flags;
+ int ret, i;
+
+ printk("%s%s\n", dz_name, dz_version);
+
+ dz_init_ports();
+
+ save_flags(flags);
+ cli();
+
+#ifndef CONFIG_SERIAL_DZ_CONSOLE
+ /* reset the chip */
+ dz_reset(&dz_ports[0]);
+#endif
+
+ /* order matters here... the trick is that flags
+ is updated... in request_irq - to immediatedly obliterate
+ it is unwise. */
+ restore_flags(flags);
+
+ if (request_irq(dz_ports[0].port.irq, dz_interrupt,
+ SA_INTERRUPT, "DZ", &dz_ports[0]))
+ panic("Unable to register DZ interrupt");
+
+ ret = uart_register_driver(&dz_reg);
+ if (ret != 0)
+ return ret;
+
+ for (i = 0; i < DZ_NB_PORT; i++)
+ uart_add_one_port(&dz_reg, &dz_ports[i].port);
+
+ return ret;
+}
+
+MODULE_DESCRIPTION("DECstation DZ serial driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/dz.h b/drivers/serial/dz.h
new file mode 100644
index 00000000000..86ef417382b
--- /dev/null
+++ b/drivers/serial/dz.h
@@ -0,0 +1,118 @@
+/*
+ * dz.h: Serial port driver for DECStations equiped
+ * with the DZ chipset.
+ *
+ * Copyright (C) 1998 Olivier A. D. Lebaillif
+ *
+ * Email: olivier.lebaillif@ifrsys.com
+ *
+ */
+#ifndef DZ_SERIAL_H
+#define DZ_SERIAL_H
+
+/*
+ * Definitions for the Control and Status Received.
+ */
+#define DZ_TRDY 0x8000 /* Transmitter empty */
+#define DZ_TIE 0x4000 /* Transmitter Interrupt Enable */
+#define DZ_RDONE 0x0080 /* Receiver data ready */
+#define DZ_RIE 0x0040 /* Receive Interrupt Enable */
+#define DZ_MSE 0x0020 /* Master Scan Enable */
+#define DZ_CLR 0x0010 /* Master reset */
+#define DZ_MAINT 0x0008 /* Loop Back Mode */
+
+/*
+ * Definitions for the Received buffer.
+ */
+#define DZ_RBUF_MASK 0x00FF /* Data Mask in the Receive Buffer */
+#define DZ_LINE_MASK 0x0300 /* Line Mask in the Receive Buffer */
+#define DZ_DVAL 0x8000 /* Valid Data indicator */
+#define DZ_OERR 0x4000 /* Overrun error indicator */
+#define DZ_FERR 0x2000 /* Frame error indicator */
+#define DZ_PERR 0x1000 /* Parity error indicator */
+
+#define LINE(x) (x & DZ_LINE_MASK) >> 8 /* Get the line number from the input buffer */
+#define UCHAR(x) (unsigned char)(x & DZ_RBUF_MASK)
+
+/*
+ * Definitions for the Transmit Register.
+ */
+#define DZ_LINE_KEYBOARD 0x0001
+#define DZ_LINE_MOUSE 0x0002
+#define DZ_LINE_MODEM 0x0004
+#define DZ_LINE_PRINTER 0x0008
+
+#define DZ_MODEM_DTR 0x0400 /* DTR for the modem line (2) */
+
+/*
+ * Definitions for the Modem Status Register.
+ */
+#define DZ_MODEM_DSR 0x0200 /* DSR for the modem line (2) */
+
+/*
+ * Definitions for the Transmit Data Register.
+ */
+#define DZ_BRK0 0x0100 /* Break assertion for line 0 */
+#define DZ_BRK1 0x0200 /* Break assertion for line 1 */
+#define DZ_BRK2 0x0400 /* Break assertion for line 2 */
+#define DZ_BRK3 0x0800 /* Break assertion for line 3 */
+
+/*
+ * Definitions for the Line Parameter Register.
+ */
+#define DZ_KEYBOARD 0x0000 /* line 0 = keyboard */
+#define DZ_MOUSE 0x0001 /* line 1 = mouse */
+#define DZ_MODEM 0x0002 /* line 2 = modem */
+#define DZ_PRINTER 0x0003 /* line 3 = printer */
+
+#define DZ_CSIZE 0x0018 /* Number of bits per byte (mask) */
+#define DZ_CS5 0x0000 /* 5 bits per byte */
+#define DZ_CS6 0x0008 /* 6 bits per byte */
+#define DZ_CS7 0x0010 /* 7 bits per byte */
+#define DZ_CS8 0x0018 /* 8 bits per byte */
+
+#define DZ_CSTOPB 0x0020 /* 2 stop bits instead of one */
+
+#define DZ_PARENB 0x0040 /* Parity enable */
+#define DZ_PARODD 0x0080 /* Odd parity instead of even */
+
+#define DZ_CBAUD 0x0E00 /* Baud Rate (mask) */
+#define DZ_B50 0x0000
+#define DZ_B75 0x0100
+#define DZ_B110 0x0200
+#define DZ_B134 0x0300
+#define DZ_B150 0x0400
+#define DZ_B300 0x0500
+#define DZ_B600 0x0600
+#define DZ_B1200 0x0700
+#define DZ_B1800 0x0800
+#define DZ_B2000 0x0900
+#define DZ_B2400 0x0A00
+#define DZ_B3600 0x0B00
+#define DZ_B4800 0x0C00
+#define DZ_B7200 0x0D00
+#define DZ_B9600 0x0E00
+
+#define DZ_CREAD 0x1000 /* Enable receiver */
+#define DZ_RXENAB 0x1000 /* enable receive char */
+/*
+ * Addresses for the DZ registers
+ */
+#define DZ_CSR 0x00 /* Control and Status Register */
+#define DZ_RBUF 0x08 /* Receive Buffer */
+#define DZ_LPR 0x08 /* Line Parameters Register */
+#define DZ_TCR 0x10 /* Transmitter Control Register */
+#define DZ_MSR 0x18 /* Modem Status Register */
+#define DZ_TDR 0x18 /* Transmit Data Register */
+
+#define DZ_NB_PORT 4
+
+#define DZ_XMIT_SIZE 4096 /* buffer size */
+#define DZ_WAKEUP_CHARS DZ_XMIT_SIZE/4
+
+#ifdef MODULE
+int init_module (void)
+void cleanup_module (void)
+#endif
+
+#endif /* DZ_SERIAL_H */
diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c
new file mode 100644
index 00000000000..546a0bc77e1
--- /dev/null
+++ b/drivers/serial/icom.c
@@ -0,0 +1,1691 @@
+/*
+ * icom.c
+ *
+ * Copyright (C) 2001 IBM Corporation. All rights reserved.
+ *
+ * Serial device driver.
+ *
+ * Based on code from serial.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#define SERIAL_DO_RESTART
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/termios.h>
+#include <linux/fs.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/serial_reg.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/vmalloc.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/spinlock.h>
+#include <linux/kobject.h>
+#include <linux/firmware.h>
+#include <linux/bitops.h>
+
+#include <asm/system.h>
+#include <asm/segment.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#include "icom.h"
+
+/*#define ICOM_TRACE enable port trace capabilities */
+
+#define ICOM_DRIVER_NAME "icom"
+#define ICOM_VERSION_STR "1.3.1"
+#define NR_PORTS 128
+#define ICOM_PORT ((struct icom_port *)port)
+#define to_icom_adapter(d) container_of(d, struct icom_adapter, kobj)
+
+static const struct pci_device_id icom_pci_table[] = {
+ {
+ .vendor = PCI_VENDOR_ID_IBM,
+ .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = ADAPTER_V1,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_IBM,
+ .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2,
+ .subvendor = PCI_VENDOR_ID_IBM,
+ .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX,
+ .driver_data = ADAPTER_V2,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_IBM,
+ .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2,
+ .subvendor = PCI_VENDOR_ID_IBM,
+ .subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM,
+ .driver_data = ADAPTER_V2,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_IBM,
+ .device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2,
+ .subvendor = PCI_VENDOR_ID_IBM,
+ .subdevice = PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL,
+ .driver_data = ADAPTER_V2,
+ },
+ {}
+};
+
+struct lookup_proc_table start_proc[4] = {
+ {NULL, ICOM_CONTROL_START_A},
+ {NULL, ICOM_CONTROL_START_B},
+ {NULL, ICOM_CONTROL_START_C},
+ {NULL, ICOM_CONTROL_START_D}
+};
+
+
+struct lookup_proc_table stop_proc[4] = {
+ {NULL, ICOM_CONTROL_STOP_A},
+ {NULL, ICOM_CONTROL_STOP_B},
+ {NULL, ICOM_CONTROL_STOP_C},
+ {NULL, ICOM_CONTROL_STOP_D}
+};
+
+struct lookup_int_table int_mask_tbl[4] = {
+ {NULL, ICOM_INT_MASK_PRC_A},
+ {NULL, ICOM_INT_MASK_PRC_B},
+ {NULL, ICOM_INT_MASK_PRC_C},
+ {NULL, ICOM_INT_MASK_PRC_D},
+};
+
+
+MODULE_DEVICE_TABLE(pci, icom_pci_table);
+
+static LIST_HEAD(icom_adapter_head);
+
+/* spinlock for adapter initialization and changing adapter operations */
+static spinlock_t icom_lock;
+
+#ifdef ICOM_TRACE
+static inline void trace(struct icom_port *, char *, unsigned long) {};
+#else
+static inline void trace(struct icom_port *icom_port, char *trace_pt, unsigned long trace_data) {};
+#endif
+
+static void free_port_memory(struct icom_port *icom_port)
+{
+ struct pci_dev *dev = icom_port->adapter->pci_dev;
+
+ trace(icom_port, "RET_PORT_MEM", 0);
+ if (icom_port->recv_buf) {
+ pci_free_consistent(dev, 4096, icom_port->recv_buf,
+ icom_port->recv_buf_pci);
+ icom_port->recv_buf = NULL;
+ }
+ if (icom_port->xmit_buf) {
+ pci_free_consistent(dev, 4096, icom_port->xmit_buf,
+ icom_port->xmit_buf_pci);
+ icom_port->xmit_buf = NULL;
+ }
+ if (icom_port->statStg) {
+ pci_free_consistent(dev, 4096, icom_port->statStg,
+ icom_port->statStg_pci);
+ icom_port->statStg = NULL;
+ }
+
+ if (icom_port->xmitRestart) {
+ pci_free_consistent(dev, 4096, icom_port->xmitRestart,
+ icom_port->xmitRestart_pci);
+ icom_port->xmitRestart = NULL;
+ }
+}
+
+static int __init get_port_memory(struct icom_port *icom_port)
+{
+ int index;
+ unsigned long stgAddr;
+ unsigned long startStgAddr;
+ unsigned long offset;
+ struct pci_dev *dev = icom_port->adapter->pci_dev;
+
+ icom_port->xmit_buf =
+ pci_alloc_consistent(dev, 4096, &icom_port->xmit_buf_pci);
+ if (!icom_port->xmit_buf) {
+ dev_err(&dev->dev, "Can not allocate Transmit buffer\n");
+ return -ENOMEM;
+ }
+
+ trace(icom_port, "GET_PORT_MEM",
+ (unsigned long) icom_port->xmit_buf);
+
+ icom_port->recv_buf =
+ pci_alloc_consistent(dev, 4096, &icom_port->recv_buf_pci);
+ if (!icom_port->recv_buf) {
+ dev_err(&dev->dev, "Can not allocate Receive buffer\n");
+ free_port_memory(icom_port);
+ return -ENOMEM;
+ }
+ trace(icom_port, "GET_PORT_MEM",
+ (unsigned long) icom_port->recv_buf);
+
+ icom_port->statStg =
+ pci_alloc_consistent(dev, 4096, &icom_port->statStg_pci);
+ if (!icom_port->statStg) {
+ dev_err(&dev->dev, "Can not allocate Status buffer\n");
+ free_port_memory(icom_port);
+ return -ENOMEM;
+ }
+ trace(icom_port, "GET_PORT_MEM",
+ (unsigned long) icom_port->statStg);
+
+ icom_port->xmitRestart =
+ pci_alloc_consistent(dev, 4096, &icom_port->xmitRestart_pci);
+ if (!icom_port->xmitRestart) {
+ dev_err(&dev->dev,
+ "Can not allocate xmit Restart buffer\n");
+ free_port_memory(icom_port);
+ return -ENOMEM;
+ }
+
+ memset(icom_port->statStg, 0, 4096);
+
+ /* FODs: Frame Out Descriptor Queue, this is a FIFO queue that
+ indicates that frames are to be transmitted
+ */
+
+ stgAddr = (unsigned long) icom_port->statStg;
+ for (index = 0; index < NUM_XBUFFS; index++) {
+ trace(icom_port, "FOD_ADDR", stgAddr);
+ stgAddr = stgAddr + sizeof(icom_port->statStg->xmit[0]);
+ if (index < (NUM_XBUFFS - 1)) {
+ memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area));
+ icom_port->statStg->xmit[index].leLengthASD =
+ (unsigned short int) cpu_to_le16(XMIT_BUFF_SZ);
+ trace(icom_port, "FOD_ADDR", stgAddr);
+ trace(icom_port, "FOD_XBUFF",
+ (unsigned long) icom_port->xmit_buf);
+ icom_port->statStg->xmit[index].leBuffer =
+ cpu_to_le32(icom_port->xmit_buf_pci);
+ } else if (index == (NUM_XBUFFS - 1)) {
+ memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area));
+ icom_port->statStg->xmit[index].leLengthASD =
+ (unsigned short int) cpu_to_le16(XMIT_BUFF_SZ);
+ trace(icom_port, "FOD_XBUFF",
+ (unsigned long) icom_port->xmit_buf);
+ icom_port->statStg->xmit[index].leBuffer =
+ cpu_to_le32(icom_port->xmit_buf_pci);
+ } else {
+ memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area));
+ }
+ }
+ /* FIDs */
+ startStgAddr = stgAddr;
+
+ /* fill in every entry, even if no buffer */
+ for (index = 0; index < NUM_RBUFFS; index++) {
+ trace(icom_port, "FID_ADDR", stgAddr);
+ stgAddr = stgAddr + sizeof(icom_port->statStg->rcv[0]);
+ icom_port->statStg->rcv[index].leLength = 0;
+ icom_port->statStg->rcv[index].WorkingLength =
+ (unsigned short int) cpu_to_le16(RCV_BUFF_SZ);
+ if (index < (NUM_RBUFFS - 1) ) {
+ offset = stgAddr - (unsigned long) icom_port->statStg;
+ icom_port->statStg->rcv[index].leNext =
+ cpu_to_le32(icom_port-> statStg_pci + offset);
+ trace(icom_port, "FID_RBUFF",
+ (unsigned long) icom_port->recv_buf);
+ icom_port->statStg->rcv[index].leBuffer =
+ cpu_to_le32(icom_port->recv_buf_pci);
+ } else if (index == (NUM_RBUFFS -1) ) {
+ offset = startStgAddr - (unsigned long) icom_port->statStg;
+ icom_port->statStg->rcv[index].leNext =
+ cpu_to_le32(icom_port-> statStg_pci + offset);
+ trace(icom_port, "FID_RBUFF",
+ (unsigned long) icom_port->recv_buf + 2048);
+ icom_port->statStg->rcv[index].leBuffer =
+ cpu_to_le32(icom_port->recv_buf_pci + 2048);
+ } else {
+ icom_port->statStg->rcv[index].leNext = 0;
+ icom_port->statStg->rcv[index].leBuffer = 0;
+ }
+ }
+
+ return 0;
+}
+
+static void stop_processor(struct icom_port *icom_port)
+{
+ unsigned long temp;
+ unsigned long flags;
+ int port;
+
+ spin_lock_irqsave(&icom_lock, flags);
+
+ port = icom_port->port;
+ if (port == 0 || port == 1)
+ stop_proc[port].global_control_reg = &icom_port->global_reg->control;
+ else
+ stop_proc[port].global_control_reg = &icom_port->global_reg->control_2;
+
+
+ if (port < 4) {
+ temp = readl(stop_proc[port].global_control_reg);
+ temp =
+ (temp & ~start_proc[port].processor_id) | stop_proc[port].processor_id;
+ writel(temp, stop_proc[port].global_control_reg);
+
+ /* write flush */
+ readl(stop_proc[port].global_control_reg);
+ } else {
+ dev_err(&icom_port->adapter->pci_dev->dev,
+ "Invalid port assignment\n");
+ }
+
+ spin_unlock_irqrestore(&icom_lock, flags);
+}
+
+static void start_processor(struct icom_port *icom_port)
+{
+ unsigned long temp;
+ unsigned long flags;
+ int port;
+
+ spin_lock_irqsave(&icom_lock, flags);
+
+ port = icom_port->port;
+ if (port == 0 || port == 1)
+ start_proc[port].global_control_reg = &icom_port->global_reg->control;
+ else
+ start_proc[port].global_control_reg = &icom_port->global_reg->control_2;
+ if (port < 4) {
+ temp = readl(start_proc[port].global_control_reg);
+ temp =
+ (temp & ~stop_proc[port].processor_id) | start_proc[port].processor_id;
+ writel(temp, start_proc[port].global_control_reg);
+
+ /* write flush */
+ readl(start_proc[port].global_control_reg);
+ } else {
+ dev_err(&icom_port->adapter->pci_dev->dev,
+ "Invalid port assignment\n");
+ }
+
+ spin_unlock_irqrestore(&icom_lock, flags);
+}
+
+static void load_code(struct icom_port *icom_port)
+{
+ const struct firmware *fw;
+ char __iomem *iram_ptr;
+ int index;
+ int status = 0;
+ void __iomem *dram_ptr = icom_port->dram;
+ dma_addr_t temp_pci;
+ unsigned char *new_page = NULL;
+ unsigned char cable_id = NO_CABLE;
+ struct pci_dev *dev = icom_port->adapter->pci_dev;
+
+ /* Clear out any pending interrupts */
+ writew(0x3FFF, icom_port->int_reg);
+
+ trace(icom_port, "CLEAR_INTERRUPTS", 0);
+
+ /* Stop processor */
+ stop_processor(icom_port);
+
+ /* Zero out DRAM */
+ memset_io(dram_ptr, 0, 512);
+
+ /* Load Call Setup into Adapter */
+ if (request_firmware(&fw, "icom_call_setup.bin", &dev->dev) < 0) {
+ dev_err(&dev->dev,"Unable to load icom_call_setup.bin firmware image\n");
+ status = -1;
+ goto load_code_exit;
+ }
+
+ if (fw->size > ICOM_DCE_IRAM_OFFSET) {
+ dev_err(&dev->dev, "Invalid firmware image for icom_call_setup.bin found.\n");
+ release_firmware(fw);
+ status = -1;
+ goto load_code_exit;
+ }
+
+ iram_ptr = (char __iomem *)icom_port->dram + ICOM_IRAM_OFFSET;
+ for (index = 0; index < fw->size; index++)
+ writeb(fw->data[index], &iram_ptr[index]);
+
+ release_firmware(fw);
+
+ /* Load Resident DCE portion of Adapter */
+ if (request_firmware(&fw, "icom_res_dce.bin", &dev->dev) < 0) {
+ dev_err(&dev->dev,"Unable to load icom_res_dce.bin firmware image\n");
+ status = -1;
+ goto load_code_exit;
+ }
+
+ if (fw->size > ICOM_IRAM_SIZE) {
+ dev_err(&dev->dev, "Invalid firmware image for icom_res_dce.bin found.\n");
+ release_firmware(fw);
+ status = -1;
+ goto load_code_exit;
+ }
+
+ iram_ptr = (char __iomem *) icom_port->dram + ICOM_IRAM_OFFSET;
+ for (index = ICOM_DCE_IRAM_OFFSET; index < fw->size; index++)
+ writeb(fw->data[index], &iram_ptr[index]);
+
+ release_firmware(fw);
+
+ /* Set Hardware level */
+ if ((icom_port->adapter->version | ADAPTER_V2) == ADAPTER_V2)
+ writeb(V2_HARDWARE, &(icom_port->dram->misc_flags));
+
+ /* Start the processor in Adapter */
+ start_processor(icom_port);
+
+ writeb((HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL),
+ &(icom_port->dram->HDLCConfigReg));
+ writeb(0x04, &(icom_port->dram->FlagFillIdleTimer)); /* 0.5 seconds */
+ writeb(0x00, &(icom_port->dram->CmdReg));
+ writeb(0x10, &(icom_port->dram->async_config3));
+ writeb((ICOM_ACFG_DRIVE1 | ICOM_ACFG_NO_PARITY | ICOM_ACFG_8BPC |
+ ICOM_ACFG_1STOP_BIT), &(icom_port->dram->async_config2));
+
+ /*Set up data in icom DRAM to indicate where personality
+ *code is located and its length.
+ */
+ new_page = pci_alloc_consistent(dev, 4096, &temp_pci);
+
+ if (!new_page) {
+ dev_err(&dev->dev, "Can not allocate DMA buffer\n");
+ status = -1;
+ goto load_code_exit;
+ }
+
+ if (request_firmware(&fw, "icom_asc.bin", &dev->dev) < 0) {
+ dev_err(&dev->dev,"Unable to load icom_asc.bin firmware image\n");
+ status = -1;
+ goto load_code_exit;
+ }
+
+ if (fw->size > ICOM_DCE_IRAM_OFFSET) {
+ dev_err(&dev->dev, "Invalid firmware image for icom_asc.bin found.\n");
+ release_firmware(fw);
+ status = -1;
+ goto load_code_exit;
+ }
+
+ for (index = 0; index < fw->size; index++)
+ new_page[index] = fw->data[index];
+
+ release_firmware(fw);
+
+ writeb((char) ((fw->size + 16)/16), &icom_port->dram->mac_length);
+ writel(temp_pci, &icom_port->dram->mac_load_addr);
+
+ /*Setting the syncReg to 0x80 causes adapter to start downloading
+ the personality code into adapter instruction RAM.
+ Once code is loaded, it will begin executing and, based on
+ information provided above, will start DMAing data from
+ shared memory to adapter DRAM.
+ */
+ /* the wait loop below verifies this write operation has been done
+ and processed
+ */
+ writeb(START_DOWNLOAD, &icom_port->dram->sync);
+
+ /* Wait max 1 Sec for data download and processor to start */
+ for (index = 0; index < 10; index++) {
+ msleep(100);
+ if (readb(&icom_port->dram->misc_flags) & ICOM_HDW_ACTIVE)
+ break;
+ }
+
+ if (index == 10)
+ status = -1;
+
+ /*
+ * check Cable ID
+ */
+ cable_id = readb(&icom_port->dram->cable_id);
+
+ if (cable_id & ICOM_CABLE_ID_VALID) {
+ /* Get cable ID into the lower 4 bits (standard form) */
+ cable_id = (cable_id & ICOM_CABLE_ID_MASK) >> 4;
+ icom_port->cable_id = cable_id;
+ } else {
+ dev_err(&dev->dev,"Invalid or no cable attached\n");
+ icom_port->cable_id = NO_CABLE;
+ }
+
+ load_code_exit:
+
+ if (status != 0) {
+ /* Clear out any pending interrupts */
+ writew(0x3FFF, icom_port->int_reg);
+
+ /* Turn off port */
+ writeb(ICOM_DISABLE, &(icom_port->dram->disable));
+
+ /* Stop processor */
+ stop_processor(icom_port);
+
+ dev_err(&icom_port->adapter->pci_dev->dev,"Port not opertional\n");
+ }
+
+ if (new_page != NULL)
+ pci_free_consistent(dev, 4096, new_page, temp_pci);
+}
+
+static int startup(struct icom_port *icom_port)
+{
+ unsigned long temp;
+ unsigned char cable_id, raw_cable_id;
+ unsigned long flags;
+ int port;
+
+ trace(icom_port, "STARTUP", 0);
+
+ if (!icom_port->dram) {
+ /* should NEVER be NULL */
+ dev_err(&icom_port->adapter->pci_dev->dev,
+ "Unusable Port, port configuration missing\n");
+ return -ENODEV;
+ }
+
+ /*
+ * check Cable ID
+ */
+ raw_cable_id = readb(&icom_port->dram->cable_id);
+ trace(icom_port, "CABLE_ID", raw_cable_id);
+
+ /* Get cable ID into the lower 4 bits (standard form) */
+ cable_id = (raw_cable_id & ICOM_CABLE_ID_MASK) >> 4;
+
+ /* Check for valid Cable ID */
+ if (!(raw_cable_id & ICOM_CABLE_ID_VALID) ||
+ (cable_id != icom_port->cable_id)) {
+
+ /* reload adapter code, pick up any potential changes in cable id */
+ load_code(icom_port);
+
+ /* still no sign of cable, error out */
+ raw_cable_id = readb(&icom_port->dram->cable_id);
+ cable_id = (raw_cable_id & ICOM_CABLE_ID_MASK) >> 4;
+ if (!(raw_cable_id & ICOM_CABLE_ID_VALID) ||
+ (icom_port->cable_id == NO_CABLE))
+ return -EIO;
+ }
+
+ /*
+ * Finally, clear and enable interrupts
+ */
+ spin_lock_irqsave(&icom_lock, flags);
+ port = icom_port->port;
+ if (port == 0 || port == 1)
+ int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask;
+ else
+ int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2;
+
+ if (port == 0 || port == 2)
+ writew(0x00FF, icom_port->int_reg);
+ else
+ writew(0x3F00, icom_port->int_reg);
+ if (port < 4) {
+ temp = readl(int_mask_tbl[port].global_int_mask);
+ writel(temp & ~int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask);
+
+ /* write flush */
+ readl(int_mask_tbl[port].global_int_mask);
+ } else {
+ dev_err(&icom_port->adapter->pci_dev->dev,
+ "Invalid port assignment\n");
+ }
+
+ spin_unlock_irqrestore(&icom_lock, flags);
+ return 0;
+}
+
+static void shutdown(struct icom_port *icom_port)
+{
+ unsigned long temp;
+ unsigned char cmdReg;
+ unsigned long flags;
+ int port;
+
+ spin_lock_irqsave(&icom_lock, flags);
+ trace(icom_port, "SHUTDOWN", 0);
+
+ /*
+ * disable all interrupts
+ */
+ port = icom_port->port;
+ if (port == 0 || port == 1)
+ int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask;
+ else
+ int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2;
+
+ if (port < 4) {
+ temp = readl(int_mask_tbl[port].global_int_mask);
+ writel(temp | int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask);
+
+ /* write flush */
+ readl(int_mask_tbl[port].global_int_mask);
+ } else {
+ dev_err(&icom_port->adapter->pci_dev->dev,
+ "Invalid port assignment\n");
+ }
+ spin_unlock_irqrestore(&icom_lock, flags);
+
+ /*
+ * disable break condition
+ */
+ cmdReg = readb(&icom_port->dram->CmdReg);
+ if ((cmdReg | CMD_SND_BREAK) == CMD_SND_BREAK) {
+ writeb(cmdReg & ~CMD_SND_BREAK, &icom_port->dram->CmdReg);
+ }
+}
+
+static int icom_write(struct uart_port *port)
+{
+ unsigned long data_count;
+ unsigned char cmdReg;
+ unsigned long offset;
+ int temp_tail = port->info->xmit.tail;
+
+ trace(ICOM_PORT, "WRITE", 0);
+
+ if (cpu_to_le16(ICOM_PORT->statStg->xmit[0].flags) &
+ SA_FLAGS_READY_TO_XMIT) {
+ trace(ICOM_PORT, "WRITE_FULL", 0);
+ return 0;
+ }
+
+ data_count = 0;
+ while ((port->info->xmit.head != temp_tail) &&
+ (data_count <= XMIT_BUFF_SZ)) {
+
+ ICOM_PORT->xmit_buf[data_count++] =
+ port->info->xmit.buf[temp_tail];
+
+ temp_tail++;
+ temp_tail &= (UART_XMIT_SIZE - 1);
+ }
+
+ if (data_count) {
+ ICOM_PORT->statStg->xmit[0].flags =
+ cpu_to_le16(SA_FLAGS_READY_TO_XMIT);
+ ICOM_PORT->statStg->xmit[0].leLength =
+ cpu_to_le16(data_count);
+ offset =
+ (unsigned long) &ICOM_PORT->statStg->xmit[0] -
+ (unsigned long) ICOM_PORT->statStg;
+ *ICOM_PORT->xmitRestart =
+ cpu_to_le32(ICOM_PORT->statStg_pci + offset);
+ cmdReg = readb(&ICOM_PORT->dram->CmdReg);
+ writeb(cmdReg | CMD_XMIT_RCV_ENABLE,
+ &ICOM_PORT->dram->CmdReg);
+ writeb(START_XMIT, &ICOM_PORT->dram->StartXmitCmd);
+ trace(ICOM_PORT, "WRITE_START", data_count);
+ /* write flush */
+ readb(&ICOM_PORT->dram->StartXmitCmd);
+ }
+
+ return data_count;
+}
+
+static inline void check_modem_status(struct icom_port *icom_port)
+{
+ static char old_status = 0;
+ char delta_status;
+ unsigned char status;
+
+ spin_lock(&icom_port->uart_port.lock);
+
+ /*modem input register */
+ status = readb(&icom_port->dram->isr);
+ trace(icom_port, "CHECK_MODEM", status);
+ delta_status = status ^ old_status;
+ if (delta_status) {
+ if (delta_status & ICOM_RI)
+ icom_port->uart_port.icount.rng++;
+ if (delta_status & ICOM_DSR)
+ icom_port->uart_port.icount.dsr++;
+ if (delta_status & ICOM_DCD)
+ uart_handle_dcd_change(&icom_port->uart_port,
+ delta_status & ICOM_DCD);
+ if (delta_status & ICOM_CTS)
+ uart_handle_cts_change(&icom_port->uart_port,
+ delta_status & ICOM_CTS);
+
+ wake_up_interruptible(&icom_port->uart_port.info->
+ delta_msr_wait);
+ old_status = status;
+ }
+ spin_unlock(&icom_port->uart_port.lock);
+}
+
+static void xmit_interrupt(u16 port_int_reg, struct icom_port *icom_port)
+{
+ unsigned short int count;
+ int i;
+
+ if (port_int_reg & (INT_XMIT_COMPLETED)) {
+ trace(icom_port, "XMIT_COMPLETE", 0);
+
+ /* clear buffer in use bit */
+ icom_port->statStg->xmit[0].flags &=
+ cpu_to_le16(~SA_FLAGS_READY_TO_XMIT);
+
+ count = (unsigned short int)
+ cpu_to_le16(icom_port->statStg->xmit[0].leLength);
+ icom_port->uart_port.icount.tx += count;
+
+ for (i=0; i<count &&
+ !uart_circ_empty(&icom_port->uart_port.info->xmit); i++) {
+
+ icom_port->uart_port.info->xmit.tail++;
+ icom_port->uart_port.info->xmit.tail &=
+ (UART_XMIT_SIZE - 1);
+ }
+
+ if (!icom_write(&icom_port->uart_port))
+ /* activate write queue */
+ uart_write_wakeup(&icom_port->uart_port);
+ } else
+ trace(icom_port, "XMIT_DISABLED", 0);
+}
+
+static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port)
+{
+ short int count, rcv_buff;
+ struct tty_struct *tty = icom_port->uart_port.info->tty;
+ unsigned short int status;
+ struct uart_icount *icount;
+ unsigned long offset;
+
+ trace(icom_port, "RCV_COMPLETE", 0);
+ rcv_buff = icom_port->next_rcv;
+
+ status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags);
+ while (status & SA_FL_RCV_DONE) {
+
+ trace(icom_port, "FID_STATUS", status);
+ count = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].leLength);
+
+ trace(icom_port, "RCV_COUNT", count);
+ if (count > (TTY_FLIPBUF_SIZE - tty->flip.count))
+ count = TTY_FLIPBUF_SIZE - tty->flip.count;
+
+ trace(icom_port, "REAL_COUNT", count);
+
+ offset =
+ cpu_to_le32(icom_port->statStg->rcv[rcv_buff].leBuffer) -
+ icom_port->recv_buf_pci;
+
+ memcpy(tty->flip.char_buf_ptr,(unsigned char *)
+ ((unsigned long)icom_port->recv_buf + offset), count);
+
+ if (count > 0) {
+ tty->flip.count += count - 1;
+ tty->flip.char_buf_ptr += count - 1;
+
+ memset(tty->flip.flag_buf_ptr, 0, count);
+ tty->flip.flag_buf_ptr += count - 1;
+ }
+
+ icount = &icom_port->uart_port.icount;
+ icount->rx += count;
+
+ /* Break detect logic */
+ if ((status & SA_FLAGS_FRAME_ERROR)
+ && (tty->flip.char_buf_ptr[0] == 0x00)) {
+ status &= ~SA_FLAGS_FRAME_ERROR;
+ status |= SA_FLAGS_BREAK_DET;
+ trace(icom_port, "BREAK_DET", 0);
+ }
+
+ if (status &
+ (SA_FLAGS_BREAK_DET | SA_FLAGS_PARITY_ERROR |
+ SA_FLAGS_FRAME_ERROR | SA_FLAGS_OVERRUN)) {
+
+ if (status & SA_FLAGS_BREAK_DET)
+ icount->brk++;
+ if (status & SA_FLAGS_PARITY_ERROR)
+ icount->parity++;
+ if (status & SA_FLAGS_FRAME_ERROR)
+ icount->frame++;
+ if (status & SA_FLAGS_OVERRUN)
+ icount->overrun++;
+
+ /*
+ * Now check to see if character should be
+ * ignored, and mask off conditions which
+ * should be ignored.
+ */
+ if (status & icom_port->ignore_status_mask) {
+ trace(icom_port, "IGNORE_CHAR", 0);
+ goto ignore_char;
+ }
+
+ status &= icom_port->read_status_mask;
+
+ if (status & SA_FLAGS_BREAK_DET) {
+ *tty->flip.flag_buf_ptr = TTY_BREAK;
+ } else if (status & SA_FLAGS_PARITY_ERROR) {
+ trace(icom_port, "PARITY_ERROR", 0);
+ *tty->flip.flag_buf_ptr = TTY_PARITY;
+ } else if (status & SA_FLAGS_FRAME_ERROR)
+ *tty->flip.flag_buf_ptr = TTY_FRAME;
+
+ if (status & SA_FLAGS_OVERRUN) {
+ /*
+ * Overrun is special, since it's
+ * reported immediately, and doesn't
+ * affect the current character
+ */
+ if (tty->flip.count < TTY_FLIPBUF_SIZE) {
+ tty->flip.count++;
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ *tty->flip.flag_buf_ptr = TTY_OVERRUN;
+ }
+ }
+ }
+
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ tty->flip.count++;
+ ignore_char:
+ icom_port->statStg->rcv[rcv_buff].flags = 0;
+ icom_port->statStg->rcv[rcv_buff].leLength = 0;
+ icom_port->statStg->rcv[rcv_buff].WorkingLength =
+ (unsigned short int) cpu_to_le16(RCV_BUFF_SZ);
+
+ rcv_buff++;
+ if (rcv_buff == NUM_RBUFFS)
+ rcv_buff = 0;
+
+ status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags);
+ }
+ icom_port->next_rcv = rcv_buff;
+ tty_flip_buffer_push(tty);
+}
+
+static void process_interrupt(u16 port_int_reg,
+ struct icom_port *icom_port)
+{
+
+ spin_lock(&icom_port->uart_port.lock);
+ trace(icom_port, "INTERRUPT", port_int_reg);
+
+ if (port_int_reg & (INT_XMIT_COMPLETED | INT_XMIT_DISABLED))
+ xmit_interrupt(port_int_reg, icom_port);
+
+ if (port_int_reg & INT_RCV_COMPLETED)
+ recv_interrupt(port_int_reg, icom_port);
+
+ spin_unlock(&icom_port->uart_port.lock);
+}
+
+static irqreturn_t icom_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ void __iomem * int_reg;
+ u32 adapter_interrupts;
+ u16 port_int_reg;
+ struct icom_adapter *icom_adapter;
+ struct icom_port *icom_port;
+
+ /* find icom_port for this interrupt */
+ icom_adapter = (struct icom_adapter *) dev_id;
+
+ if ((icom_adapter->version | ADAPTER_V2) == ADAPTER_V2) {
+ int_reg = icom_adapter->base_addr + 0x8024;
+
+ adapter_interrupts = readl(int_reg);
+
+ if (adapter_interrupts & 0x00003FFF) {
+ /* port 2 interrupt, NOTE: for all ADAPTER_V2, port 2 will be active */
+ icom_port = &icom_adapter->port_info[2];
+ port_int_reg = (u16) adapter_interrupts;
+ process_interrupt(port_int_reg, icom_port);
+ check_modem_status(icom_port);
+ }
+ if (adapter_interrupts & 0x3FFF0000) {
+ /* port 3 interrupt */
+ icom_port = &icom_adapter->port_info[3];
+ if (icom_port->status == ICOM_PORT_ACTIVE) {
+ port_int_reg =
+ (u16) (adapter_interrupts >> 16);
+ process_interrupt(port_int_reg, icom_port);
+ check_modem_status(icom_port);
+ }
+ }
+
+ /* Clear out any pending interrupts */
+ writel(adapter_interrupts, int_reg);
+
+ int_reg = icom_adapter->base_addr + 0x8004;
+ } else {
+ int_reg = icom_adapter->base_addr + 0x4004;
+ }
+
+ adapter_interrupts = readl(int_reg);
+
+ if (adapter_interrupts & 0x00003FFF) {
+ /* port 0 interrupt, NOTE: for all adapters, port 0 will be active */
+ icom_port = &icom_adapter->port_info[0];
+ port_int_reg = (u16) adapter_interrupts;
+ process_interrupt(port_int_reg, icom_port);
+ check_modem_status(icom_port);
+ }
+ if (adapter_interrupts & 0x3FFF0000) {
+ /* port 1 interrupt */
+ icom_port = &icom_adapter->port_info[1];
+ if (icom_port->status == ICOM_PORT_ACTIVE) {
+ port_int_reg = (u16) (adapter_interrupts >> 16);
+ process_interrupt(port_int_reg, icom_port);
+ check_modem_status(icom_port);
+ }
+ }
+
+ /* Clear out any pending interrupts */
+ writel(adapter_interrupts, int_reg);
+
+ /* flush the write */
+ adapter_interrupts = readl(int_reg);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * ------------------------------------------------------------------
+ * Begin serial-core API
+ * ------------------------------------------------------------------
+ */
+static unsigned int icom_tx_empty(struct uart_port *port)
+{
+ int ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ if (cpu_to_le16(ICOM_PORT->statStg->xmit[0].flags) &
+ SA_FLAGS_READY_TO_XMIT)
+ ret = TIOCSER_TEMT;
+ else
+ ret = 0;
+
+ spin_unlock_irqrestore(&port->lock, flags);
+ return ret;
+}
+
+static void icom_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ unsigned char local_osr;
+
+ trace(ICOM_PORT, "SET_MODEM", 0);
+ local_osr = readb(&ICOM_PORT->dram->osr);
+
+ if (mctrl & TIOCM_RTS) {
+ trace(ICOM_PORT, "RAISE_RTS", 0);
+ local_osr |= ICOM_RTS;
+ } else {
+ trace(ICOM_PORT, "LOWER_RTS", 0);
+ local_osr &= ~ICOM_RTS;
+ }
+
+ if (mctrl & TIOCM_DTR) {
+ trace(ICOM_PORT, "RAISE_DTR", 0);
+ local_osr |= ICOM_DTR;
+ } else {
+ trace(ICOM_PORT, "LOWER_DTR", 0);
+ local_osr &= ~ICOM_DTR;
+ }
+
+ writeb(local_osr, &ICOM_PORT->dram->osr);
+}
+
+static unsigned int icom_get_mctrl(struct uart_port *port)
+{
+ unsigned char status;
+ unsigned int result;
+
+ trace(ICOM_PORT, "GET_MODEM", 0);
+
+ status = readb(&ICOM_PORT->dram->isr);
+
+ result = ((status & ICOM_DCD) ? TIOCM_CAR : 0)
+ | ((status & ICOM_RI) ? TIOCM_RNG : 0)
+ | ((status & ICOM_DSR) ? TIOCM_DSR : 0)
+ | ((status & ICOM_CTS) ? TIOCM_CTS : 0);
+ return result;
+}
+
+static void icom_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ unsigned char cmdReg;
+
+ if (tty_stop) {
+ trace(ICOM_PORT, "STOP", 0);
+ cmdReg = readb(&ICOM_PORT->dram->CmdReg);
+ writeb(cmdReg | CMD_HOLD_XMIT, &ICOM_PORT->dram->CmdReg);
+ }
+}
+
+static void icom_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+ unsigned char cmdReg;
+
+ trace(ICOM_PORT, "START", 0);
+ cmdReg = readb(&ICOM_PORT->dram->CmdReg);
+ if ((cmdReg & CMD_HOLD_XMIT) == CMD_HOLD_XMIT)
+ writeb(cmdReg & ~CMD_HOLD_XMIT,
+ &ICOM_PORT->dram->CmdReg);
+
+ icom_write(port);
+}
+
+static void icom_send_xchar(struct uart_port *port, char ch)
+{
+ unsigned char xdata;
+ int index;
+ unsigned long flags;
+
+ trace(ICOM_PORT, "SEND_XCHAR", ch);
+
+ /* wait .1 sec to send char */
+ for (index = 0; index < 10; index++) {
+ spin_lock_irqsave(&port->lock, flags);
+ xdata = readb(&ICOM_PORT->dram->xchar);
+ if (xdata == 0x00) {
+ trace(ICOM_PORT, "QUICK_WRITE", 0);
+ writeb(ch, &ICOM_PORT->dram->xchar);
+
+ /* flush write operation */
+ xdata = readb(&ICOM_PORT->dram->xchar);
+ spin_unlock_irqrestore(&port->lock, flags);
+ break;
+ }
+ spin_unlock_irqrestore(&port->lock, flags);
+ msleep(10);
+ }
+}
+
+static void icom_stop_rx(struct uart_port *port)
+{
+ unsigned char cmdReg;
+
+ cmdReg = readb(&ICOM_PORT->dram->CmdReg);
+ writeb(cmdReg & ~CMD_RCV_ENABLE, &ICOM_PORT->dram->CmdReg);
+}
+
+static void icom_enable_ms(struct uart_port *port)
+{
+ /* no-op */
+}
+
+static void icom_break(struct uart_port *port, int break_state)
+{
+ unsigned char cmdReg;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ trace(ICOM_PORT, "BREAK", 0);
+ cmdReg = readb(&ICOM_PORT->dram->CmdReg);
+ if (break_state == -1) {
+ writeb(cmdReg | CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg);
+ } else {
+ writeb(cmdReg & ~CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg);
+ }
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int icom_open(struct uart_port *port)
+{
+ int retval;
+
+ kobject_get(&ICOM_PORT->adapter->kobj);
+ retval = startup(ICOM_PORT);
+
+ if (retval) {
+ kobject_put(&ICOM_PORT->adapter->kobj);
+ trace(ICOM_PORT, "STARTUP_ERROR", 0);
+ return retval;
+ }
+
+ return 0;
+}
+
+static void icom_close(struct uart_port *port)
+{
+ unsigned char cmdReg;
+
+ trace(ICOM_PORT, "CLOSE", 0);
+
+ /* stop receiver */
+ cmdReg = readb(&ICOM_PORT->dram->CmdReg);
+ writeb(cmdReg & (unsigned char) ~CMD_RCV_ENABLE,
+ &ICOM_PORT->dram->CmdReg);
+
+ shutdown(ICOM_PORT);
+
+ kobject_put(&ICOM_PORT->adapter->kobj);
+}
+
+static void icom_set_termios(struct uart_port *port,
+ struct termios *termios,
+ struct termios *old_termios)
+{
+ int baud;
+ unsigned cflag, iflag;
+ int bits;
+ char new_config2;
+ char new_config3 = 0;
+ char tmp_byte;
+ int index;
+ int rcv_buff, xmit_buff;
+ unsigned long offset;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ trace(ICOM_PORT, "CHANGE_SPEED", 0);
+
+ cflag = termios->c_cflag;
+ iflag = termios->c_iflag;
+
+ new_config2 = ICOM_ACFG_DRIVE1;
+
+ /* byte size and parity */
+ switch (cflag & CSIZE) {
+ case CS5: /* 5 bits/char */
+ new_config2 |= ICOM_ACFG_5BPC;
+ bits = 7;
+ break;
+ case CS6: /* 6 bits/char */
+ new_config2 |= ICOM_ACFG_6BPC;
+ bits = 8;
+ break;
+ case CS7: /* 7 bits/char */
+ new_config2 |= ICOM_ACFG_7BPC;
+ bits = 9;
+ break;
+ case CS8: /* 8 bits/char */
+ new_config2 |= ICOM_ACFG_8BPC;
+ bits = 10;
+ break;
+ default:
+ bits = 10;
+ break;
+ }
+ if (cflag & CSTOPB) {
+ /* 2 stop bits */
+ new_config2 |= ICOM_ACFG_2STOP_BIT;
+ bits++;
+ }
+ if (cflag & PARENB) {
+ /* parity bit enabled */
+ new_config2 |= ICOM_ACFG_PARITY_ENAB;
+ trace(ICOM_PORT, "PARENB", 0);
+ bits++;
+ }
+ if (cflag & PARODD) {
+ /* odd parity */
+ new_config2 |= ICOM_ACFG_PARITY_ODD;
+ trace(ICOM_PORT, "PARODD", 0);
+ }
+
+ /* Determine divisor based on baud rate */
+ baud = uart_get_baud_rate(port, termios, old_termios,
+ icom_acfg_baud[0],
+ icom_acfg_baud[BAUD_TABLE_LIMIT]);
+ if (!baud)
+ baud = 9600; /* B0 transition handled in rs_set_termios */
+
+ for (index = 0; index < BAUD_TABLE_LIMIT; index++) {
+ if (icom_acfg_baud[index] == baud) {
+ new_config3 = index;
+ break;
+ }
+ }
+
+ uart_update_timeout(port, cflag, baud);
+
+ /* CTS flow control flag and modem status interrupts */
+ tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg));
+ if (cflag & CRTSCTS)
+ tmp_byte |= HDLC_HDW_FLOW;
+ else
+ tmp_byte &= ~HDLC_HDW_FLOW;
+ writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg));
+
+ /*
+ * Set up parity check flag
+ */
+ ICOM_PORT->read_status_mask = SA_FLAGS_OVERRUN | SA_FL_RCV_DONE;
+ if (iflag & INPCK)
+ ICOM_PORT->read_status_mask |=
+ SA_FLAGS_FRAME_ERROR | SA_FLAGS_PARITY_ERROR;
+
+ if ((iflag & BRKINT) || (iflag & PARMRK))
+ ICOM_PORT->read_status_mask |= SA_FLAGS_BREAK_DET;
+
+ /*
+ * Characters to ignore
+ */
+ ICOM_PORT->ignore_status_mask = 0;
+ if (iflag & IGNPAR)
+ ICOM_PORT->ignore_status_mask |=
+ SA_FLAGS_PARITY_ERROR | SA_FLAGS_FRAME_ERROR;
+ if (iflag & IGNBRK) {
+ ICOM_PORT->ignore_status_mask |= SA_FLAGS_BREAK_DET;
+ /*
+ * If we're ignore parity and break indicators, ignore
+ * overruns too. (For real raw support).
+ */
+ if (iflag & IGNPAR)
+ ICOM_PORT->ignore_status_mask |= SA_FLAGS_OVERRUN;
+ }
+
+ /*
+ * !!! ignore all characters if CREAD is not set
+ */
+ if ((cflag & CREAD) == 0)
+ ICOM_PORT->ignore_status_mask |= SA_FL_RCV_DONE;
+
+ /* Turn off Receiver to prepare for reset */
+ writeb(CMD_RCV_DISABLE, &ICOM_PORT->dram->CmdReg);
+
+ for (index = 0; index < 10; index++) {
+ if (readb(&ICOM_PORT->dram->PrevCmdReg) == 0x00) {
+ break;
+ }
+ }
+
+ /* clear all current buffers of data */
+ for (rcv_buff = 0; rcv_buff < NUM_RBUFFS; rcv_buff++) {
+ ICOM_PORT->statStg->rcv[rcv_buff].flags = 0;
+ ICOM_PORT->statStg->rcv[rcv_buff].leLength = 0;
+ ICOM_PORT->statStg->rcv[rcv_buff].WorkingLength =
+ (unsigned short int) cpu_to_le16(RCV_BUFF_SZ);
+ }
+
+ for (xmit_buff = 0; xmit_buff < NUM_XBUFFS; xmit_buff++) {
+ ICOM_PORT->statStg->xmit[xmit_buff].flags = 0;
+ }
+
+ /* activate changes and start xmit and receiver here */
+ /* Enable the receiver */
+ writeb(new_config3, &(ICOM_PORT->dram->async_config3));
+ writeb(new_config2, &(ICOM_PORT->dram->async_config2));
+ tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg));
+ tmp_byte |= HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL;
+ writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg));
+ writeb(0x04, &(ICOM_PORT->dram->FlagFillIdleTimer)); /* 0.5 seconds */
+ writeb(0xFF, &(ICOM_PORT->dram->ier)); /* enable modem signal interrupts */
+
+ /* reset processor */
+ writeb(CMD_RESTART, &ICOM_PORT->dram->CmdReg);
+
+ for (index = 0; index < 10; index++) {
+ if (readb(&ICOM_PORT->dram->CmdReg) == 0x00) {
+ break;
+ }
+ }
+
+ /* Enable Transmitter and Reciever */
+ offset =
+ (unsigned long) &ICOM_PORT->statStg->rcv[0] -
+ (unsigned long) ICOM_PORT->statStg;
+ writel(ICOM_PORT->statStg_pci + offset,
+ &ICOM_PORT->dram->RcvStatusAddr);
+ ICOM_PORT->next_rcv = 0;
+ ICOM_PORT->put_length = 0;
+ *ICOM_PORT->xmitRestart = 0;
+ writel(ICOM_PORT->xmitRestart_pci,
+ &ICOM_PORT->dram->XmitStatusAddr);
+ trace(ICOM_PORT, "XR_ENAB", 0);
+ writeb(CMD_XMIT_RCV_ENABLE, &ICOM_PORT->dram->CmdReg);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *icom_type(struct uart_port *port)
+{
+ return "icom";
+}
+
+static void icom_release_port(struct uart_port *port)
+{
+}
+
+static int icom_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+static void icom_config_port(struct uart_port *port, int flags)
+{
+ port->type = PORT_ICOM;
+}
+
+static struct uart_ops icom_ops = {
+ .tx_empty = icom_tx_empty,
+ .set_mctrl = icom_set_mctrl,
+ .get_mctrl = icom_get_mctrl,
+ .stop_tx = icom_stop_tx,
+ .start_tx = icom_start_tx,
+ .send_xchar = icom_send_xchar,
+ .stop_rx = icom_stop_rx,
+ .enable_ms = icom_enable_ms,
+ .break_ctl = icom_break,
+ .startup = icom_open,
+ .shutdown = icom_close,
+ .set_termios = icom_set_termios,
+ .type = icom_type,
+ .release_port = icom_release_port,
+ .request_port = icom_request_port,
+ .config_port = icom_config_port,
+};
+
+#define ICOM_CONSOLE NULL
+
+static struct uart_driver icom_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = ICOM_DRIVER_NAME,
+ .dev_name = "ttyA",
+ .major = ICOM_MAJOR,
+ .minor = ICOM_MINOR_START,
+ .nr = NR_PORTS,
+ .cons = ICOM_CONSOLE,
+};
+
+static int __devinit icom_init_ports(struct icom_adapter *icom_adapter)
+{
+ u32 subsystem_id = icom_adapter->subsystem_id;
+ int retval = 0;
+ int i;
+ struct icom_port *icom_port;
+
+ if (icom_adapter->version == ADAPTER_V1) {
+ icom_adapter->numb_ports = 2;
+
+ for (i = 0; i < 2; i++) {
+ icom_port = &icom_adapter->port_info[i];
+ icom_port->port = i;
+ icom_port->status = ICOM_PORT_ACTIVE;
+ icom_port->imbed_modem = ICOM_UNKNOWN;
+ }
+ } else {
+ if (subsystem_id == PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL) {
+ icom_adapter->numb_ports = 4;
+
+ for (i = 0; i < 4; i++) {
+ icom_port = &icom_adapter->port_info[i];
+
+ icom_port->port = i;
+ icom_port->status = ICOM_PORT_ACTIVE;
+ icom_port->imbed_modem = ICOM_IMBED_MODEM;
+ }
+ } else {
+ icom_adapter->numb_ports = 4;
+
+ icom_adapter->port_info[0].port = 0;
+ icom_adapter->port_info[0].status = ICOM_PORT_ACTIVE;
+
+ if (subsystem_id ==
+ PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM) {
+ icom_adapter->port_info[0].imbed_modem = ICOM_IMBED_MODEM;
+ } else {
+ icom_adapter->port_info[0].imbed_modem = ICOM_RVX;
+ }
+
+ icom_adapter->port_info[1].status = ICOM_PORT_OFF;
+
+ icom_adapter->port_info[2].port = 2;
+ icom_adapter->port_info[2].status = ICOM_PORT_ACTIVE;
+ icom_adapter->port_info[2].imbed_modem = ICOM_RVX;
+ icom_adapter->port_info[3].status = ICOM_PORT_OFF;
+ }
+ }
+
+ return retval;
+}
+
+static void icom_port_active(struct icom_port *icom_port, struct icom_adapter *icom_adapter, int port_num)
+{
+ if (icom_adapter->version == ADAPTER_V1) {
+ icom_port->global_reg = icom_adapter->base_addr + 0x4000;
+ icom_port->int_reg = icom_adapter->base_addr +
+ 0x4004 + 2 - 2 * port_num;
+ } else {
+ icom_port->global_reg = icom_adapter->base_addr + 0x8000;
+ if (icom_port->port < 2)
+ icom_port->int_reg = icom_adapter->base_addr +
+ 0x8004 + 2 - 2 * icom_port->port;
+ else
+ icom_port->int_reg = icom_adapter->base_addr +
+ 0x8024 + 2 - 2 * (icom_port->port - 2);
+ }
+}
+static int __init icom_load_ports(struct icom_adapter *icom_adapter)
+{
+ struct icom_port *icom_port;
+ int port_num;
+ int retval;
+
+ for (port_num = 0; port_num < icom_adapter->numb_ports; port_num++) {
+
+ icom_port = &icom_adapter->port_info[port_num];
+
+ if (icom_port->status == ICOM_PORT_ACTIVE) {
+ icom_port_active(icom_port, icom_adapter, port_num);
+ icom_port->dram = icom_adapter->base_addr +
+ 0x2000 * icom_port->port;
+
+ icom_port->adapter = icom_adapter;
+
+ /* get port memory */
+ if ((retval = get_port_memory(icom_port)) != 0) {
+ dev_err(&icom_port->adapter->pci_dev->dev,
+ "Memory allocation for port FAILED\n");
+ }
+ }
+ }
+ return 0;
+}
+
+static int __devinit icom_alloc_adapter(struct icom_adapter
+ **icom_adapter_ref)
+{
+ int adapter_count = 0;
+ struct icom_adapter *icom_adapter;
+ struct icom_adapter *cur_adapter_entry;
+ struct list_head *tmp;
+
+ icom_adapter = (struct icom_adapter *)
+ kmalloc(sizeof(struct icom_adapter), GFP_KERNEL);
+
+ if (!icom_adapter) {
+ return -ENOMEM;
+ }
+
+ memset(icom_adapter, 0, sizeof(struct icom_adapter));
+
+ list_for_each(tmp, &icom_adapter_head) {
+ cur_adapter_entry =
+ list_entry(tmp, struct icom_adapter,
+ icom_adapter_entry);
+ if (cur_adapter_entry->index != adapter_count) {
+ break;
+ }
+ adapter_count++;
+ }
+
+ icom_adapter->index = adapter_count;
+ list_add_tail(&icom_adapter->icom_adapter_entry, tmp);
+
+ *icom_adapter_ref = icom_adapter;
+ return 0;
+}
+
+static void icom_free_adapter(struct icom_adapter *icom_adapter)
+{
+ list_del(&icom_adapter->icom_adapter_entry);
+ kfree(icom_adapter);
+}
+
+static void icom_remove_adapter(struct icom_adapter *icom_adapter)
+{
+ struct icom_port *icom_port;
+ int index;
+
+ for (index = 0; index < icom_adapter->numb_ports; index++) {
+ icom_port = &icom_adapter->port_info[index];
+
+ if (icom_port->status == ICOM_PORT_ACTIVE) {
+ dev_info(&icom_adapter->pci_dev->dev,
+ "Device removed\n");
+
+ uart_remove_one_port(&icom_uart_driver,
+ &icom_port->uart_port);
+
+ /* be sure that DTR and RTS are dropped */
+ writeb(0x00, &icom_port->dram->osr);
+
+ /* Wait 0.1 Sec for simple Init to complete */
+ msleep(100);
+
+ /* Stop proccessor */
+ stop_processor(icom_port);
+
+ free_port_memory(icom_port);
+ }
+ }
+
+ free_irq(icom_adapter->irq_number, (void *) icom_adapter);
+ iounmap(icom_adapter->base_addr);
+ icom_free_adapter(icom_adapter);
+ pci_release_regions(icom_adapter->pci_dev);
+}
+
+static void icom_kobj_release(struct kobject *kobj)
+{
+ struct icom_adapter *icom_adapter;
+
+ icom_adapter = to_icom_adapter(kobj);
+ icom_remove_adapter(icom_adapter);
+}
+
+static struct kobj_type icom_kobj_type = {
+ .release = icom_kobj_release,
+};
+
+static int __devinit icom_probe(struct pci_dev *dev,
+ const struct pci_device_id *ent)
+{
+ int index;
+ unsigned int command_reg;
+ int retval;
+ struct icom_adapter *icom_adapter;
+ struct icom_port *icom_port;
+
+ retval = pci_enable_device(dev);
+ if (retval) {
+ dev_err(&dev->dev, "Device enable FAILED\n");
+ return retval;
+ }
+
+ if ( (retval = pci_request_regions(dev, "icom"))) {
+ dev_err(&dev->dev, "pci_request_region FAILED\n");
+ pci_disable_device(dev);
+ return retval;
+ }
+
+ pci_set_master(dev);
+
+ if ( (retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg))) {
+ dev_err(&dev->dev, "PCI Config read FAILED\n");
+ return retval;
+ }
+
+ pci_write_config_dword(dev, PCI_COMMAND,
+ command_reg | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
+ | PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
+
+ if (ent->driver_data == ADAPTER_V1) {
+ pci_write_config_dword(dev, 0x44, 0x8300830A);
+ } else {
+ pci_write_config_dword(dev, 0x44, 0x42004200);
+ pci_write_config_dword(dev, 0x48, 0x42004200);
+ }
+
+
+ retval = icom_alloc_adapter(&icom_adapter);
+ if (retval) {
+ dev_err(&dev->dev, "icom_alloc_adapter FAILED\n");
+ retval = -EIO;
+ goto probe_exit0;
+ }
+
+ icom_adapter->base_addr_pci = pci_resource_start(dev, 0);
+ icom_adapter->irq_number = dev->irq;
+ icom_adapter->pci_dev = dev;
+ icom_adapter->version = ent->driver_data;
+ icom_adapter->subsystem_id = ent->subdevice;
+
+
+ retval = icom_init_ports(icom_adapter);
+ if (retval) {
+ dev_err(&dev->dev, "Port configuration failed\n");
+ goto probe_exit1;
+ }
+
+ icom_adapter->base_addr = ioremap(icom_adapter->base_addr_pci,
+ pci_resource_len(dev, 0));
+
+ if (!icom_adapter->base_addr)
+ goto probe_exit1;
+
+ /* save off irq and request irq line */
+ if ( (retval = request_irq(dev->irq, icom_interrupt,
+ SA_INTERRUPT | SA_SHIRQ, ICOM_DRIVER_NAME,
+ (void *) icom_adapter))) {
+ goto probe_exit2;
+ }
+
+ retval = icom_load_ports(icom_adapter);
+
+ for (index = 0; index < icom_adapter->numb_ports; index++) {
+ icom_port = &icom_adapter->port_info[index];
+
+ if (icom_port->status == ICOM_PORT_ACTIVE) {
+ icom_port->uart_port.irq = icom_port->adapter->irq_number;
+ icom_port->uart_port.type = PORT_ICOM;
+ icom_port->uart_port.iotype = UPIO_MEM;
+ icom_port->uart_port.membase =
+ (char *) icom_adapter->base_addr_pci;
+ icom_port->uart_port.fifosize = 16;
+ icom_port->uart_port.ops = &icom_ops;
+ icom_port->uart_port.line =
+ icom_port->port + icom_adapter->index * 4;
+ if (uart_add_one_port (&icom_uart_driver, &icom_port->uart_port)) {
+ icom_port->status = ICOM_PORT_OFF;
+ dev_err(&dev->dev, "Device add failed\n");
+ } else
+ dev_info(&dev->dev, "Device added\n");
+ }
+ }
+
+ kobject_init(&icom_adapter->kobj);
+ icom_adapter->kobj.ktype = &icom_kobj_type;
+ return 0;
+
+probe_exit2:
+ iounmap(icom_adapter->base_addr);
+probe_exit1:
+ icom_free_adapter(icom_adapter);
+
+probe_exit0:
+ pci_release_regions(dev);
+ pci_disable_device(dev);
+
+ return retval;
+
+
+}
+
+static void __devexit icom_remove(struct pci_dev *dev)
+{
+ struct icom_adapter *icom_adapter;
+ struct list_head *tmp;
+
+ list_for_each(tmp, &icom_adapter_head) {
+ icom_adapter = list_entry(tmp, struct icom_adapter,
+ icom_adapter_entry);
+ if (icom_adapter->pci_dev == dev) {
+ kobject_put(&icom_adapter->kobj);
+ return;
+ }
+ }
+
+ dev_err(&dev->dev, "Unable to find device to remove\n");
+}
+
+static struct pci_driver icom_pci_driver = {
+ .name = ICOM_DRIVER_NAME,
+ .id_table = icom_pci_table,
+ .probe = icom_probe,
+ .remove = __devexit_p(icom_remove),
+};
+
+static int __init icom_init(void)
+{
+ int ret;
+
+ spin_lock_init(&icom_lock);
+
+ ret = uart_register_driver(&icom_uart_driver);
+ if (ret)
+ return ret;
+
+ ret = pci_register_driver(&icom_pci_driver);
+
+ if (ret < 0)
+ uart_unregister_driver(&icom_uart_driver);
+
+ return ret;
+}
+
+static void __exit icom_exit(void)
+{
+ pci_unregister_driver(&icom_pci_driver);
+ uart_unregister_driver(&icom_uart_driver);
+}
+
+module_init(icom_init);
+module_exit(icom_exit);
+
+#ifdef ICOM_TRACE
+static inline void trace(struct icom_port *icom_port, char *trace_pt,
+ unsigned long trace_data)
+{
+ dev_info(&icom_port->adapter->pci_dev->dev, ":%d:%s - %lx\n",
+ icom_port->port, trace_pt, trace_data);
+}
+#endif
+
+MODULE_AUTHOR("Michael Anderson <mjanders@us.ibm.com>");
+MODULE_DESCRIPTION("IBM iSeries Serial IOA driver");
+MODULE_SUPPORTED_DEVICE
+ ("IBM iSeries 2745, 2771, 2772, 2742, 2793 and 2805 Communications adapters");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/serial/icom.h b/drivers/serial/icom.h
new file mode 100644
index 00000000000..23dc0f7ddf8
--- /dev/null
+++ b/drivers/serial/icom.h
@@ -0,0 +1,290 @@
+/*
+ * icom.h
+ *
+ * Copyright (C) 2001 Michael Anderson, IBM Corporation
+ *
+ * Serial device driver include file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include<linux/serial_core.h>
+
+#define BAUD_TABLE_LIMIT ((sizeof(icom_acfg_baud)/sizeof(int)) - 1)
+static int icom_acfg_baud[] = {
+ 300,
+ 600,
+ 900,
+ 1200,
+ 1800,
+ 2400,
+ 3600,
+ 4800,
+ 7200,
+ 9600,
+ 14400,
+ 19200,
+ 28800,
+ 38400,
+ 57600,
+ 76800,
+ 115200,
+ 153600,
+ 230400,
+ 307200,
+ 460800,
+};
+
+struct icom_regs {
+ u32 control; /* Adapter Control Register */
+ u32 interrupt; /* Adapter Interrupt Register */
+ u32 int_mask; /* Adapter Interrupt Mask Reg */
+ u32 int_pri; /* Adapter Interrupt Priority r */
+ u32 int_reg_b; /* Adapter non-masked Interrupt */
+ u32 resvd01;
+ u32 resvd02;
+ u32 resvd03;
+ u32 control_2; /* Adapter Control Register 2 */
+ u32 interrupt_2; /* Adapter Interrupt Register 2 */
+ u32 int_mask_2; /* Adapter Interrupt Mask 2 */
+ u32 int_pri_2; /* Adapter Interrupt Prior 2 */
+ u32 int_reg_2b; /* Adapter non-masked 2 */
+};
+
+struct func_dram {
+ u32 reserved[108]; /* 0-1B0 reserved by personality code */
+ u32 RcvStatusAddr; /* 1B0-1B3 Status Address for Next rcv */
+ u8 RcvStnAddr; /* 1B4 Receive Station Addr */
+ u8 IdleState; /* 1B5 Idle State */
+ u8 IdleMonitor; /* 1B6 Idle Monitor */
+ u8 FlagFillIdleTimer; /* 1B7 Flag Fill Idle Timer */
+ u32 XmitStatusAddr; /* 1B8-1BB Transmit Status Address */
+ u8 StartXmitCmd; /* 1BC Start Xmit Command */
+ u8 HDLCConfigReg; /* 1BD Reserved */
+ u8 CauseCode; /* 1BE Cause code for fatal error */
+ u8 xchar; /* 1BF High priority send */
+ u32 reserved3; /* 1C0-1C3 Reserved */
+ u8 PrevCmdReg; /* 1C4 Reserved */
+ u8 CmdReg; /* 1C5 Command Register */
+ u8 async_config2; /* 1C6 Async Config Byte 2 */
+ u8 async_config3; /* 1C7 Async Config Byte 3 */
+ u8 dce_resvd[20]; /* 1C8-1DB DCE Rsvd */
+ u8 dce_resvd21; /* 1DC DCE Rsvd (21st byte */
+ u8 misc_flags; /* 1DD misc flags */
+#define V2_HARDWARE 0x40
+#define ICOM_HDW_ACTIVE 0x01
+ u8 call_length; /* 1DE Phone #/CFI buff ln */
+ u8 call_length2; /* 1DF Upper byte (unused) */
+ u32 call_addr; /* 1E0-1E3 Phn #/CFI buff addr */
+ u16 timer_value; /* 1E4-1E5 general timer value */
+ u8 timer_command; /* 1E6 general timer cmd */
+ u8 dce_command; /* 1E7 dce command reg */
+ u8 dce_cmd_status; /* 1E8 dce command stat */
+ u8 x21_r1_ioff; /* 1E9 dce ready counter */
+ u8 x21_r0_ioff; /* 1EA dce not ready ctr */
+ u8 x21_ralt_ioff; /* 1EB dce CNR counter */
+ u8 x21_r1_ion; /* 1EC dce ready I on ctr */
+ u8 rsvd_ier; /* 1ED Rsvd for IER (if ne */
+ u8 ier; /* 1EE Interrupt Enable */
+ u8 isr; /* 1EF Input Signal Reg */
+ u8 osr; /* 1F0 Output Signal Reg */
+ u8 reset; /* 1F1 Reset/Reload Reg */
+ u8 disable; /* 1F2 Disable Reg */
+ u8 sync; /* 1F3 Sync Reg */
+ u8 error_stat; /* 1F4 Error Status */
+ u8 cable_id; /* 1F5 Cable ID */
+ u8 cs_length; /* 1F6 CS Load Length */
+ u8 mac_length; /* 1F7 Mac Load Length */
+ u32 cs_load_addr; /* 1F8-1FB Call Load PCI Addr */
+ u32 mac_load_addr; /* 1FC-1FF Mac Load PCI Addr */
+};
+
+/*
+ * adapter defines and structures
+ */
+#define ICOM_CONTROL_START_A 0x00000008
+#define ICOM_CONTROL_STOP_A 0x00000004
+#define ICOM_CONTROL_START_B 0x00000002
+#define ICOM_CONTROL_STOP_B 0x00000001
+#define ICOM_CONTROL_START_C 0x00000008
+#define ICOM_CONTROL_STOP_C 0x00000004
+#define ICOM_CONTROL_START_D 0x00000002
+#define ICOM_CONTROL_STOP_D 0x00000001
+#define ICOM_IRAM_OFFSET 0x1000
+#define ICOM_IRAM_SIZE 0x0C00
+#define ICOM_DCE_IRAM_OFFSET 0x0A00
+#define ICOM_CABLE_ID_VALID 0x01
+#define ICOM_CABLE_ID_MASK 0xF0
+#define ICOM_DISABLE 0x80
+#define CMD_XMIT_RCV_ENABLE 0xC0
+#define CMD_XMIT_ENABLE 0x40
+#define CMD_RCV_DISABLE 0x00
+#define CMD_RCV_ENABLE 0x80
+#define CMD_RESTART 0x01
+#define CMD_HOLD_XMIT 0x02
+#define CMD_SND_BREAK 0x04
+#define RS232_CABLE 0x06
+#define V24_CABLE 0x0E
+#define V35_CABLE 0x0C
+#define V36_CABLE 0x02
+#define NO_CABLE 0x00
+#define START_DOWNLOAD 0x80
+#define ICOM_INT_MASK_PRC_A 0x00003FFF
+#define ICOM_INT_MASK_PRC_B 0x3FFF0000
+#define ICOM_INT_MASK_PRC_C 0x00003FFF
+#define ICOM_INT_MASK_PRC_D 0x3FFF0000
+#define INT_RCV_COMPLETED 0x1000
+#define INT_XMIT_COMPLETED 0x2000
+#define INT_IDLE_DETECT 0x0800
+#define INT_RCV_DISABLED 0x0400
+#define INT_XMIT_DISABLED 0x0200
+#define INT_RCV_XMIT_SHUTDOWN 0x0100
+#define INT_FATAL_ERROR 0x0080
+#define INT_CABLE_PULL 0x0020
+#define INT_SIGNAL_CHANGE 0x0010
+#define HDLC_PPP_PURE_ASYNC 0x02
+#define HDLC_FF_FILL 0x00
+#define HDLC_HDW_FLOW 0x01
+#define START_XMIT 0x80
+#define ICOM_ACFG_DRIVE1 0x20
+#define ICOM_ACFG_NO_PARITY 0x00
+#define ICOM_ACFG_PARITY_ENAB 0x02
+#define ICOM_ACFG_PARITY_ODD 0x01
+#define ICOM_ACFG_8BPC 0x00
+#define ICOM_ACFG_7BPC 0x04
+#define ICOM_ACFG_6BPC 0x08
+#define ICOM_ACFG_5BPC 0x0C
+#define ICOM_ACFG_1STOP_BIT 0x00
+#define ICOM_ACFG_2STOP_BIT 0x10
+#define ICOM_DTR 0x80
+#define ICOM_RTS 0x40
+#define ICOM_RI 0x08
+#define ICOM_DSR 0x80
+#define ICOM_DCD 0x20
+#define ICOM_CTS 0x40
+
+#define NUM_XBUFFS 1
+#define NUM_RBUFFS 2
+#define RCV_BUFF_SZ 0x0200
+#define XMIT_BUFF_SZ 0x1000
+struct statusArea {
+ /**********************************************/
+ /* Transmit Status Area */
+ /**********************************************/
+ struct xmit_status_area{
+ u32 leNext; /* Next entry in Little Endian on Adapter */
+ u32 leNextASD;
+ u32 leBuffer; /* Buffer for entry in LE for Adapter */
+ u16 leLengthASD;
+ u16 leOffsetASD;
+ u16 leLength; /* Length of data in segment */
+ u16 flags;
+#define SA_FLAGS_DONE 0x0080 /* Done with Segment */
+#define SA_FLAGS_CONTINUED 0x8000 /* More Segments */
+#define SA_FLAGS_IDLE 0x4000 /* Mark IDLE after frm */
+#define SA_FLAGS_READY_TO_XMIT 0x0800
+#define SA_FLAGS_STAT_MASK 0x007F
+ } xmit[NUM_XBUFFS];
+
+ /**********************************************/
+ /* Receive Status Area */
+ /**********************************************/
+ struct {
+ u32 leNext; /* Next entry in Little Endian on Adapter */
+ u32 leNextASD;
+ u32 leBuffer; /* Buffer for entry in LE for Adapter */
+ u16 WorkingLength; /* size of segment */
+ u16 reserv01;
+ u16 leLength; /* Length of data in segment */
+ u16 flags;
+#define SA_FL_RCV_DONE 0x0010 /* Data ready */
+#define SA_FLAGS_OVERRUN 0x0040
+#define SA_FLAGS_PARITY_ERROR 0x0080
+#define SA_FLAGS_FRAME_ERROR 0x0001
+#define SA_FLAGS_FRAME_TRUNC 0x0002
+#define SA_FLAGS_BREAK_DET 0x0004 /* set conditionally by device driver, not hardware */
+#define SA_FLAGS_RCV_MASK 0xFFE6
+ } rcv[NUM_RBUFFS];
+};
+
+struct icom_adapter;
+
+
+#define ICOM_MAJOR 243
+#define ICOM_MINOR_START 0
+
+struct icom_port {
+ struct uart_port uart_port;
+ u8 imbed_modem;
+#define ICOM_UNKNOWN 1
+#define ICOM_RVX 2
+#define ICOM_IMBED_MODEM 3
+ unsigned char cable_id;
+ unsigned char read_status_mask;
+ unsigned char ignore_status_mask;
+ void __iomem * int_reg;
+ struct icom_regs __iomem *global_reg;
+ struct func_dram __iomem *dram;
+ int port;
+ struct statusArea *statStg;
+ dma_addr_t statStg_pci;
+ u32 *xmitRestart;
+ dma_addr_t xmitRestart_pci;
+ unsigned char *xmit_buf;
+ dma_addr_t xmit_buf_pci;
+ unsigned char *recv_buf;
+ dma_addr_t recv_buf_pci;
+ int next_rcv;
+ int put_length;
+ int status;
+#define ICOM_PORT_ACTIVE 1 /* Port exists. */
+#define ICOM_PORT_OFF 0 /* Port does not exist. */
+ int load_in_progress;
+ struct icom_adapter *adapter;
+};
+
+struct icom_adapter {
+ void __iomem * base_addr;
+ unsigned long base_addr_pci;
+ unsigned char irq_number;
+ struct pci_dev *pci_dev;
+ struct icom_port port_info[4];
+ int index;
+ int version;
+#define ADAPTER_V1 0x0001
+#define ADAPTER_V2 0x0002
+ u32 subsystem_id;
+#define FOUR_PORT_MODEL 0x0252
+#define V2_TWO_PORTS_RVX 0x021A
+#define V2_ONE_PORT_RVX_ONE_PORT_IMBED_MDM 0x0251
+ int numb_ports;
+ struct list_head icom_adapter_entry;
+ struct kobject kobj;
+};
+
+/* prototype */
+extern void iCom_sercons_init(void);
+
+struct lookup_proc_table {
+ u32 __iomem *global_control_reg;
+ unsigned long processor_id;
+};
+
+struct lookup_int_table {
+ u32 __iomem *global_int_mask;
+ unsigned long processor_id;
+};
+
+#define MSECS_TO_JIFFIES(ms) (((ms)*HZ+999)/1000)
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
new file mode 100644
index 00000000000..d273134f9e6
--- /dev/null
+++ b/drivers/serial/imx.c
@@ -0,0 +1,909 @@
+/*
+ * linux/drivers/serial/imx.c
+ *
+ * Driver for Motorola IMX serial ports
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ * Author: Sascha Hauer <sascha@saschahauer.de>
+ * Copyright (C) 2004 Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * [29-Mar-2005] Mike Lee
+ * Added hardware handshake
+ */
+#include <linux/config.h>
+
+#if defined(CONFIG_SERIAL_IMX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+
+/* We've been assigned a range on the "Low-density serial ports" major */
+#define SERIAL_IMX_MAJOR 204
+#define MINOR_START 41
+
+#define NR_PORTS 2
+
+#define IMX_ISR_PASS_LIMIT 256
+
+/*
+ * This is the size of our serial port register set.
+ */
+#define UART_PORT_SIZE 0x100
+
+/*
+ * This determines how often we check the modem status signals
+ * for any change. They generally aren't connected to an IRQ
+ * so we have to poll them. We also check immediately before
+ * filling the TX fifo incase CTS has been dropped.
+ */
+#define MCTRL_TIMEOUT (250*HZ/1000)
+
+#define DRIVER_NAME "IMX-uart"
+
+struct imx_port {
+ struct uart_port port;
+ struct timer_list timer;
+ unsigned int old_status;
+ int txirq,rxirq;
+};
+
+/*
+ * Handle any change of modem status signal since we were last called.
+ */
+static void imx_mctrl_check(struct imx_port *sport)
+{
+ unsigned int status, changed;
+
+ status = sport->port.ops->get_mctrl(&sport->port);
+ changed = status ^ sport->old_status;
+
+ if (changed == 0)
+ return;
+
+ sport->old_status = status;
+
+ if (changed & TIOCM_RI)
+ sport->port.icount.rng++;
+ if (changed & TIOCM_DSR)
+ sport->port.icount.dsr++;
+ if (changed & TIOCM_CAR)
+ uart_handle_dcd_change(&sport->port, status & TIOCM_CAR);
+ if (changed & TIOCM_CTS)
+ uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
+
+ wake_up_interruptible(&sport->port.info->delta_msr_wait);
+}
+
+/*
+ * This is our per-port timeout handler, for checking the
+ * modem status signals.
+ */
+static void imx_timeout(unsigned long data)
+{
+ struct imx_port *sport = (struct imx_port *)data;
+ unsigned long flags;
+
+ if (sport->port.info) {
+ spin_lock_irqsave(&sport->port.lock, flags);
+ imx_mctrl_check(sport);
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+
+ mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT);
+ }
+}
+
+/*
+ * interrupts disabled on entry
+ */
+static void imx_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+ UCR1((u32)sport->port.membase) &= ~UCR1_TXMPTYEN;
+}
+
+/*
+ * interrupts disabled on entry
+ */
+static void imx_stop_rx(struct uart_port *port)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+ UCR2((u32)sport->port.membase) &= ~UCR2_RXEN;
+}
+
+/*
+ * Set the modem control timer to fire immediately.
+ */
+static void imx_enable_ms(struct uart_port *port)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+
+ mod_timer(&sport->timer, jiffies);
+}
+
+static inline void imx_transmit_buffer(struct imx_port *sport)
+{
+ struct circ_buf *xmit = &sport->port.info->xmit;
+
+ do {
+ /* send xmit->buf[xmit->tail]
+ * out the port here */
+ URTX0((u32)sport->port.membase) = xmit->buf[xmit->tail];
+ xmit->tail = (xmit->tail + 1) &
+ (UART_XMIT_SIZE - 1);
+ sport->port.icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ } while (!(UTS((u32)sport->port.membase) & UTS_TXFULL));
+
+ if (uart_circ_empty(xmit))
+ imx_stop_tx(&sport->port, 0);
+}
+
+/*
+ * interrupts disabled on entry
+ */
+static void imx_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+
+ UCR1((u32)sport->port.membase) |= UCR1_TXMPTYEN;
+
+ if(UTS((u32)sport->port.membase) & UTS_TXEMPTY)
+ imx_transmit_buffer(sport);
+}
+
+static irqreturn_t imx_txint(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct imx_port *sport = (struct imx_port *)dev_id;
+ struct circ_buf *xmit = &sport->port.info->xmit;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sport->port.lock,flags);
+ if (sport->port.x_char)
+ {
+ /* Send next char */
+ URTX0((u32)sport->port.membase) = sport->port.x_char;
+ goto out;
+ }
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
+ imx_stop_tx(&sport->port, 0);
+ goto out;
+ }
+
+ imx_transmit_buffer(sport);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&sport->port);
+
+out:
+ spin_unlock_irqrestore(&sport->port.lock,flags);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t imx_rxint(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct imx_port *sport = dev_id;
+ unsigned int rx,flg,ignored = 0;
+ struct tty_struct *tty = sport->port.info->tty;
+ unsigned long flags;
+
+ rx = URXD0((u32)sport->port.membase);
+ spin_lock_irqsave(&sport->port.lock,flags);
+
+ do {
+ flg = TTY_NORMAL;
+ sport->port.icount.rx++;
+
+ if( USR2((u32)sport->port.membase) & USR2_BRCD ) {
+ USR2((u32)sport->port.membase) |= USR2_BRCD;
+ if(uart_handle_break(&sport->port))
+ goto ignore_char;
+ }
+
+ if (uart_handle_sysrq_char
+ (&sport->port, (unsigned char)rx, regs))
+ goto ignore_char;
+
+ if( rx & (URXD_PRERR | URXD_OVRRUN | URXD_FRMERR) )
+ goto handle_error;
+
+ error_return:
+ tty_insert_flip_char(tty, rx, flg);
+
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+ goto out;
+
+ ignore_char:
+ rx = URXD0((u32)sport->port.membase);
+ } while(rx & URXD_CHARRDY);
+
+out:
+ spin_unlock_irqrestore(&sport->port.lock,flags);
+ tty_flip_buffer_push(tty);
+ return IRQ_HANDLED;
+
+handle_error:
+ if (rx & URXD_PRERR)
+ sport->port.icount.parity++;
+ else if (rx & URXD_FRMERR)
+ sport->port.icount.frame++;
+ if (rx & URXD_OVRRUN)
+ sport->port.icount.overrun++;
+
+ if (rx & sport->port.ignore_status_mask) {
+ if (++ignored > 100)
+ goto out;
+ goto ignore_char;
+ }
+
+ rx &= sport->port.read_status_mask;
+
+ if (rx & URXD_PRERR)
+ flg = TTY_PARITY;
+ else if (rx & URXD_FRMERR)
+ flg = TTY_FRAME;
+ if (rx & URXD_OVRRUN)
+ flg = TTY_OVERRUN;
+
+#ifdef SUPPORT_SYSRQ
+ sport->port.sysrq = 0;
+#endif
+ goto error_return;
+}
+
+/*
+ * Return TIOCSER_TEMT when transmitter is not busy.
+ */
+static unsigned int imx_tx_empty(struct uart_port *port)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+
+ return USR2((u32)sport->port.membase) & USR2_TXDC ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int imx_get_mctrl(struct uart_port *port)
+{
+ return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+}
+
+static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+/*
+ * Interrupts always disabled.
+ */
+static void imx_break_ctl(struct uart_port *port, int break_state)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+
+ if ( break_state != 0 )
+ UCR1((u32)sport->port.membase) |= UCR1_SNDBRK;
+ else
+ UCR1((u32)sport->port.membase) &= ~UCR1_SNDBRK;
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+}
+
+#define TXTL 2 /* reset default */
+#define RXTL 1 /* reset default */
+
+static int imx_startup(struct uart_port *port)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+ int retval;
+ unsigned int val;
+ unsigned long flags;
+
+ /* set receiver / transmitter trigger level. We assume
+ * that RFDIV has been set by the arch setup or by the bootloader.
+ */
+ val = (UFCR((u32)sport->port.membase) & UFCR_RFDIV) | TXTL<<10 | RXTL;
+ UFCR((u32)sport->port.membase) = val;
+
+ /* disable the DREN bit (Data Ready interrupt enable) before
+ * requesting IRQs
+ */
+ UCR4((u32)sport->port.membase) &= ~UCR4_DREN;
+
+ /*
+ * Allocate the IRQ
+ */
+ retval = request_irq(sport->rxirq, imx_rxint, 0,
+ DRIVER_NAME, sport);
+ if (retval) goto error_out2;
+
+ retval = request_irq(sport->txirq, imx_txint, 0,
+ "imx-uart", sport);
+ if (retval) goto error_out1;
+
+ /*
+ * Finally, clear and enable interrupts
+ */
+
+ UCR1((u32)sport->port.membase) |=
+ (UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_UARTEN);
+
+ UCR2((u32)sport->port.membase) |= (UCR2_RXEN | UCR2_TXEN);
+ /*
+ * Enable modem status interrupts
+ */
+ spin_lock_irqsave(&sport->port.lock,flags);
+ imx_enable_ms(&sport->port);
+ spin_unlock_irqrestore(&sport->port.lock,flags);
+
+ return 0;
+
+error_out1:
+ free_irq(sport->rxirq, sport);
+error_out2:
+ free_irq(sport->txirq, sport);
+ return retval;
+}
+
+static void imx_shutdown(struct uart_port *port)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+
+ /*
+ * Stop our timer.
+ */
+ del_timer_sync(&sport->timer);
+
+ /*
+ * Free the interrupts
+ */
+ free_irq(sport->txirq, sport);
+ free_irq(sport->rxirq, sport);
+
+ /*
+ * Disable all interrupts, port and break condition.
+ */
+
+ UCR1((u32)sport->port.membase) &=
+ ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_UARTEN);
+}
+
+static void
+imx_set_termios(struct uart_port *port, struct termios *termios,
+ struct termios *old)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+ unsigned long flags;
+ unsigned int ucr2, old_ucr1, old_txrxen, baud, quot;
+ unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
+
+ /*
+ * If we don't support modem control lines, don't allow
+ * these to be set.
+ */
+ if (0) {
+ termios->c_cflag &= ~(HUPCL | CRTSCTS | CMSPAR);
+ termios->c_cflag |= CLOCAL;
+ }
+
+ /*
+ * We only support CS7 and CS8.
+ */
+ while ((termios->c_cflag & CSIZE) != CS7 &&
+ (termios->c_cflag & CSIZE) != CS8) {
+ termios->c_cflag &= ~CSIZE;
+ termios->c_cflag |= old_csize;
+ old_csize = CS8;
+ }
+
+ if ((termios->c_cflag & CSIZE) == CS8)
+ ucr2 = UCR2_WS | UCR2_SRST | UCR2_IRTS;
+ else
+ ucr2 = UCR2_SRST | UCR2_IRTS;
+
+ if (termios->c_cflag & CRTSCTS) {
+ ucr2 &= ~UCR2_IRTS;
+ ucr2 |= UCR2_CTSC;
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ ucr2 |= UCR2_STPB;
+ if (termios->c_cflag & PARENB) {
+ ucr2 |= UCR2_PREN;
+ if (!(termios->c_cflag & PARODD))
+ ucr2 |= UCR2_PROE;
+ }
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ quot = uart_get_divisor(port, baud);
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+
+ sport->port.read_status_mask = 0;
+ if (termios->c_iflag & INPCK)
+ sport->port.read_status_mask |= (URXD_FRMERR | URXD_PRERR);
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ sport->port.read_status_mask |= URXD_BRK;
+
+ /*
+ * Characters to ignore
+ */
+ sport->port.ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ sport->port.ignore_status_mask |= URXD_PRERR;
+ if (termios->c_iflag & IGNBRK) {
+ sport->port.ignore_status_mask |= URXD_BRK;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ sport->port.ignore_status_mask |= URXD_OVRRUN;
+ }
+
+ del_timer_sync(&sport->timer);
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ /*
+ * disable interrupts and drain transmitter
+ */
+ old_ucr1 = UCR1((u32)sport->port.membase);
+ UCR1((u32)sport->port.membase) &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN);
+
+ while ( !(USR2((u32)sport->port.membase) & USR2_TXDC))
+ barrier();
+
+ /* then, disable everything */
+ old_txrxen = UCR2((u32)sport->port.membase) & ( UCR2_TXEN | UCR2_RXEN );
+ UCR2((u32)sport->port.membase) &= ~( UCR2_TXEN | UCR2_RXEN);
+
+ /* set the parity, stop bits and data size */
+ UCR2((u32)sport->port.membase) = ucr2;
+
+ /* set the baud rate. We assume uartclk = 16 MHz
+ *
+ * baud * 16 UBIR - 1
+ * --------- = --------
+ * uartclk UBMR - 1
+ */
+ UBIR((u32)sport->port.membase) = (baud / 100) - 1;
+ UBMR((u32)sport->port.membase) = 10000 - 1;
+
+ UCR1((u32)sport->port.membase) = old_ucr1;
+ UCR2((u32)sport->port.membase) |= old_txrxen;
+
+ if (UART_ENABLE_MS(&sport->port, termios->c_cflag))
+ imx_enable_ms(&sport->port);
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+}
+
+static const char *imx_type(struct uart_port *port)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+
+ return sport->port.type == PORT_IMX ? "IMX" : NULL;
+}
+
+/*
+ * Release the memory region(s) being used by 'port'.
+ */
+static void imx_release_port(struct uart_port *port)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+
+ release_mem_region(sport->port.mapbase, UART_PORT_SIZE);
+}
+
+/*
+ * Request the memory region(s) being used by 'port'.
+ */
+static int imx_request_port(struct uart_port *port)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+
+ return request_mem_region(sport->port.mapbase, UART_PORT_SIZE,
+ "imx-uart") != NULL ? 0 : -EBUSY;
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void imx_config_port(struct uart_port *port, int flags)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+
+ if (flags & UART_CONFIG_TYPE &&
+ imx_request_port(&sport->port) == 0)
+ sport->port.type = PORT_IMX;
+}
+
+/*
+ * Verify the new serial_struct (for TIOCSSERIAL).
+ * The only change we allow are to the flags and type, and
+ * even then only between PORT_IMX and PORT_UNKNOWN
+ */
+static int
+imx_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+ int ret = 0;
+
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_IMX)
+ ret = -EINVAL;
+ if (sport->port.irq != ser->irq)
+ ret = -EINVAL;
+ if (ser->io_type != UPIO_MEM)
+ ret = -EINVAL;
+ if (sport->port.uartclk / 16 != ser->baud_base)
+ ret = -EINVAL;
+ if ((void *)sport->port.mapbase != ser->iomem_base)
+ ret = -EINVAL;
+ if (sport->port.iobase != ser->port)
+ ret = -EINVAL;
+ if (ser->hub6 != 0)
+ ret = -EINVAL;
+ return ret;
+}
+
+static struct uart_ops imx_pops = {
+ .tx_empty = imx_tx_empty,
+ .set_mctrl = imx_set_mctrl,
+ .get_mctrl = imx_get_mctrl,
+ .stop_tx = imx_stop_tx,
+ .start_tx = imx_start_tx,
+ .stop_rx = imx_stop_rx,
+ .enable_ms = imx_enable_ms,
+ .break_ctl = imx_break_ctl,
+ .startup = imx_startup,
+ .shutdown = imx_shutdown,
+ .set_termios = imx_set_termios,
+ .type = imx_type,
+ .release_port = imx_release_port,
+ .request_port = imx_request_port,
+ .config_port = imx_config_port,
+ .verify_port = imx_verify_port,
+};
+
+static struct imx_port imx_ports[] = {
+ {
+ .txirq = UART1_MINT_TX,
+ .rxirq = UART1_MINT_RX,
+ .port = {
+ .type = PORT_IMX,
+ .iotype = SERIAL_IO_MEM,
+ .membase = (void *)IMX_UART1_BASE,
+ .mapbase = IMX_UART1_BASE, /* FIXME */
+ .irq = UART1_MINT_RX,
+ .uartclk = 16000000,
+ .fifosize = 8,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .ops = &imx_pops,
+ .line = 0,
+ },
+ }, {
+ .txirq = UART2_MINT_TX,
+ .rxirq = UART2_MINT_RX,
+ .port = {
+ .type = PORT_IMX,
+ .iotype = SERIAL_IO_MEM,
+ .membase = (void *)IMX_UART2_BASE,
+ .mapbase = IMX_UART2_BASE, /* FIXME */
+ .irq = UART2_MINT_RX,
+ .uartclk = 16000000,
+ .fifosize = 8,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .ops = &imx_pops,
+ .line = 1,
+ },
+ }
+};
+
+/*
+ * Setup the IMX serial ports.
+ * Note also that we support "console=ttySMXx" where "x" is either 0 or 1.
+ * Which serial port this ends up being depends on the machine you're
+ * running this kernel on. I'm not convinced that this is a good idea,
+ * but that's the way it traditionally works.
+ *
+ */
+static void __init imx_init_ports(void)
+{
+ static int first = 1;
+ int i;
+
+ if (!first)
+ return;
+ first = 0;
+
+ for (i = 0; i < ARRAY_SIZE(imx_ports); i++) {
+ init_timer(&imx_ports[i].timer);
+ imx_ports[i].timer.function = imx_timeout;
+ imx_ports[i].timer.data = (unsigned long)&imx_ports[i];
+ }
+
+ imx_gpio_mode(PC9_PF_UART1_CTS);
+ imx_gpio_mode(PC10_PF_UART1_RTS);
+ imx_gpio_mode(PC11_PF_UART1_TXD);
+ imx_gpio_mode(PC12_PF_UART1_RXD);
+ imx_gpio_mode(PB28_PF_UART2_CTS);
+ imx_gpio_mode(PB29_PF_UART2_RTS);
+
+ imx_gpio_mode(PB30_PF_UART2_TXD);
+ imx_gpio_mode(PB31_PF_UART2_RXD);
+
+#if 0 /* We don't need these, on the mx1 the _modem_ side of the uart
+ * is implemented.
+ */
+ imx_gpio_mode(PD7_AF_UART2_DTR);
+ imx_gpio_mode(PD8_AF_UART2_DCD);
+ imx_gpio_mode(PD9_AF_UART2_RI);
+ imx_gpio_mode(PD10_AF_UART2_DSR);
+#endif
+
+
+}
+
+#ifdef CONFIG_SERIAL_IMX_CONSOLE
+
+/*
+ * Interrupts are disabled on entering
+ */
+static void
+imx_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct imx_port *sport = &imx_ports[co->index];
+ unsigned int old_ucr1, old_ucr2, i;
+
+ /*
+ * First, save UCR1/2 and then disable interrupts
+ */
+ old_ucr1 = UCR1((u32)sport->port.membase);
+ old_ucr2 = UCR2((u32)sport->port.membase);
+
+ UCR1((u32)sport->port.membase) =
+ (old_ucr1 | UCR1_UARTCLKEN | UCR1_UARTEN)
+ & ~(UCR1_TXMPTYEN | UCR1_RRDYEN);
+ UCR2((u32)sport->port.membase) = old_ucr2 | UCR2_TXEN;
+
+ /*
+ * Now, do each character
+ */
+ for (i = 0; i < count; i++) {
+
+ while ((UTS((u32)sport->port.membase) & UTS_TXFULL))
+ barrier();
+
+ URTX0((u32)sport->port.membase) = s[i];
+
+ if (s[i] == '\n') {
+ while ((UTS((u32)sport->port.membase) & UTS_TXFULL))
+ barrier();
+ URTX0((u32)sport->port.membase) = '\r';
+ }
+ }
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore UCR1/2
+ */
+ while (!(USR2((u32)sport->port.membase) & USR2_TXDC));
+
+ UCR1((u32)sport->port.membase) = old_ucr1;
+ UCR2((u32)sport->port.membase) = old_ucr2;
+}
+
+/*
+ * If the port was already initialised (eg, by a boot loader),
+ * try to determine the current setup.
+ */
+static void __init
+imx_console_get_options(struct imx_port *sport, int *baud,
+ int *parity, int *bits)
+{
+ if ( UCR1((u32)sport->port.membase) | UCR1_UARTEN ) {
+ /* ok, the port was enabled */
+ unsigned int ucr2, ubir,ubmr, uartclk;
+
+ ucr2 = UCR2((u32)sport->port.membase);
+
+ *parity = 'n';
+ if (ucr2 & UCR2_PREN) {
+ if (ucr2 & UCR2_PROE)
+ *parity = 'o';
+ else
+ *parity = 'e';
+ }
+
+ if (ucr2 & UCR2_WS)
+ *bits = 8;
+ else
+ *bits = 7;
+
+ ubir = UBIR((u32)sport->port.membase) & 0xffff;
+ ubmr = UBMR((u32)sport->port.membase) & 0xffff;
+ uartclk = sport->port.uartclk;
+
+ *baud = ((uartclk/16) * (ubir + 1)) / (ubmr + 1);
+ }
+}
+
+static int __init
+imx_console_setup(struct console *co, char *options)
+{
+ struct imx_port *sport;
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports))
+ co->index = 0;
+ sport = &imx_ports[co->index];
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ else
+ imx_console_get_options(sport, &baud, &parity, &bits);
+
+ return uart_set_options(&sport->port, co, baud, parity, bits, flow);
+}
+
+extern struct uart_driver imx_reg;
+static struct console imx_console = {
+ .name = "ttySMX",
+ .write = imx_console_write,
+ .device = uart_console_device,
+ .setup = imx_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &imx_reg,
+};
+
+static int __init imx_rs_console_init(void)
+{
+ imx_init_ports();
+ register_console(&imx_console);
+ return 0;
+}
+console_initcall(imx_rs_console_init);
+
+#define IMX_CONSOLE &imx_console
+#else
+#define IMX_CONSOLE NULL
+#endif
+
+static struct uart_driver imx_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = DRIVER_NAME,
+ .dev_name = "ttySMX",
+ .devfs_name = "ttsmx/",
+ .major = SERIAL_IMX_MAJOR,
+ .minor = MINOR_START,
+ .nr = ARRAY_SIZE(imx_ports),
+ .cons = IMX_CONSOLE,
+};
+
+static int serial_imx_suspend(struct device *_dev, u32 state, u32 level)
+{
+ struct imx_port *sport = dev_get_drvdata(_dev);
+
+ if (sport && level == SUSPEND_DISABLE)
+ uart_suspend_port(&imx_reg, &sport->port);
+
+ return 0;
+}
+
+static int serial_imx_resume(struct device *_dev, u32 level)
+{
+ struct imx_port *sport = dev_get_drvdata(_dev);
+
+ if (sport && level == RESUME_ENABLE)
+ uart_resume_port(&imx_reg, &sport->port);
+
+ return 0;
+}
+
+static int serial_imx_probe(struct device *_dev)
+{
+ struct platform_device *dev = to_platform_device(_dev);
+
+ imx_ports[dev->id].port.dev = _dev;
+ uart_add_one_port(&imx_reg, &imx_ports[dev->id].port);
+ dev_set_drvdata(_dev, &imx_ports[dev->id]);
+ return 0;
+}
+
+static int serial_imx_remove(struct device *_dev)
+{
+ struct imx_port *sport = dev_get_drvdata(_dev);
+
+ dev_set_drvdata(_dev, NULL);
+
+ if (sport)
+ uart_remove_one_port(&imx_reg, &sport->port);
+
+ return 0;
+}
+
+static struct device_driver serial_imx_driver = {
+ .name = "imx-uart",
+ .bus = &platform_bus_type,
+ .probe = serial_imx_probe,
+ .remove = serial_imx_remove,
+
+ .suspend = serial_imx_suspend,
+ .resume = serial_imx_resume,
+};
+
+static int __init imx_serial_init(void)
+{
+ int ret;
+
+ printk(KERN_INFO "Serial: IMX driver\n");
+
+ imx_init_ports();
+
+ ret = uart_register_driver(&imx_reg);
+ if (ret)
+ return ret;
+
+ ret = driver_register(&serial_imx_driver);
+ if (ret != 0)
+ uart_unregister_driver(&imx_reg);
+
+ return 0;
+}
+
+static void __exit imx_serial_exit(void)
+{
+ uart_unregister_driver(&imx_reg);
+}
+
+module_init(imx_serial_init);
+module_exit(imx_serial_exit);
+
+MODULE_AUTHOR("Sascha Hauer");
+MODULE_DESCRIPTION("IMX generic serial port driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c
new file mode 100644
index 00000000000..d054f126570
--- /dev/null
+++ b/drivers/serial/ioc4_serial.c
@@ -0,0 +1,2909 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003-2005 Silicon Graphics, Inc. All Rights Reserved.
+ */
+
+
+/*
+ * This file contains a module version of the ioc4 serial driver. This
+ * includes all the support functions needed (support functions, etc.)
+ * and the serial driver itself.
+ */
+#include <linux/errno.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serialP.h>
+#include <linux/circ_buf.h>
+#include <linux/serial_reg.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/ioc4_common.h>
+#include <linux/serial_core.h>
+
+/*
+ * interesting things about the ioc4
+ */
+
+#define IOC4_NUM_SERIAL_PORTS 4 /* max ports per card */
+#define IOC4_NUM_CARDS 8 /* max cards per partition */
+
+#define GET_SIO_IR(_n) (_n == 0) ? (IOC4_SIO_IR_S0) : \
+ (_n == 1) ? (IOC4_SIO_IR_S1) : \
+ (_n == 2) ? (IOC4_SIO_IR_S2) : \
+ (IOC4_SIO_IR_S3)
+
+#define GET_OTHER_IR(_n) (_n == 0) ? (IOC4_OTHER_IR_S0_MEMERR) : \
+ (_n == 1) ? (IOC4_OTHER_IR_S1_MEMERR) : \
+ (_n == 2) ? (IOC4_OTHER_IR_S2_MEMERR) : \
+ (IOC4_OTHER_IR_S3_MEMERR)
+
+
+/*
+ * All IOC4 registers are 32 bits wide.
+ */
+
+/*
+ * PCI Memory Space Map
+ */
+#define IOC4_PCI_ERR_ADDR_L 0x000 /* Low Error Address */
+#define IOC4_PCI_ERR_ADDR_VLD (0x1 << 0)
+#define IOC4_PCI_ERR_ADDR_MST_ID_MSK (0xf << 1)
+#define IOC4_PCI_ERR_ADDR_MST_NUM_MSK (0xe << 1)
+#define IOC4_PCI_ERR_ADDR_MST_TYP_MSK (0x1 << 1)
+#define IOC4_PCI_ERR_ADDR_MUL_ERR (0x1 << 5)
+#define IOC4_PCI_ERR_ADDR_ADDR_MSK (0x3ffffff << 6)
+
+/* Interrupt types */
+#define IOC4_SIO_INTR_TYPE 0
+#define IOC4_OTHER_INTR_TYPE 1
+#define IOC4_NUM_INTR_TYPES 2
+
+/* Bitmasks for IOC4_SIO_IR, IOC4_SIO_IEC, and IOC4_SIO_IES */
+#define IOC4_SIO_IR_S0_TX_MT 0x00000001 /* Serial port 0 TX empty */
+#define IOC4_SIO_IR_S0_RX_FULL 0x00000002 /* Port 0 RX buf full */
+#define IOC4_SIO_IR_S0_RX_HIGH 0x00000004 /* Port 0 RX hiwat */
+#define IOC4_SIO_IR_S0_RX_TIMER 0x00000008 /* Port 0 RX timeout */
+#define IOC4_SIO_IR_S0_DELTA_DCD 0x00000010 /* Port 0 delta DCD */
+#define IOC4_SIO_IR_S0_DELTA_CTS 0x00000020 /* Port 0 delta CTS */
+#define IOC4_SIO_IR_S0_INT 0x00000040 /* Port 0 pass-thru intr */
+#define IOC4_SIO_IR_S0_TX_EXPLICIT 0x00000080 /* Port 0 explicit TX thru */
+#define IOC4_SIO_IR_S1_TX_MT 0x00000100 /* Serial port 1 */
+#define IOC4_SIO_IR_S1_RX_FULL 0x00000200 /* */
+#define IOC4_SIO_IR_S1_RX_HIGH 0x00000400 /* */
+#define IOC4_SIO_IR_S1_RX_TIMER 0x00000800 /* */
+#define IOC4_SIO_IR_S1_DELTA_DCD 0x00001000 /* */
+#define IOC4_SIO_IR_S1_DELTA_CTS 0x00002000 /* */
+#define IOC4_SIO_IR_S1_INT 0x00004000 /* */
+#define IOC4_SIO_IR_S1_TX_EXPLICIT 0x00008000 /* */
+#define IOC4_SIO_IR_S2_TX_MT 0x00010000 /* Serial port 2 */
+#define IOC4_SIO_IR_S2_RX_FULL 0x00020000 /* */
+#define IOC4_SIO_IR_S2_RX_HIGH 0x00040000 /* */
+#define IOC4_SIO_IR_S2_RX_TIMER 0x00080000 /* */
+#define IOC4_SIO_IR_S2_DELTA_DCD 0x00100000 /* */
+#define IOC4_SIO_IR_S2_DELTA_CTS 0x00200000 /* */
+#define IOC4_SIO_IR_S2_INT 0x00400000 /* */
+#define IOC4_SIO_IR_S2_TX_EXPLICIT 0x00800000 /* */
+#define IOC4_SIO_IR_S3_TX_MT 0x01000000 /* Serial port 3 */
+#define IOC4_SIO_IR_S3_RX_FULL 0x02000000 /* */
+#define IOC4_SIO_IR_S3_RX_HIGH 0x04000000 /* */
+#define IOC4_SIO_IR_S3_RX_TIMER 0x08000000 /* */
+#define IOC4_SIO_IR_S3_DELTA_DCD 0x10000000 /* */
+#define IOC4_SIO_IR_S3_DELTA_CTS 0x20000000 /* */
+#define IOC4_SIO_IR_S3_INT 0x40000000 /* */
+#define IOC4_SIO_IR_S3_TX_EXPLICIT 0x80000000 /* */
+
+/* Per device interrupt masks */
+#define IOC4_SIO_IR_S0 (IOC4_SIO_IR_S0_TX_MT | \
+ IOC4_SIO_IR_S0_RX_FULL | \
+ IOC4_SIO_IR_S0_RX_HIGH | \
+ IOC4_SIO_IR_S0_RX_TIMER | \
+ IOC4_SIO_IR_S0_DELTA_DCD | \
+ IOC4_SIO_IR_S0_DELTA_CTS | \
+ IOC4_SIO_IR_S0_INT | \
+ IOC4_SIO_IR_S0_TX_EXPLICIT)
+#define IOC4_SIO_IR_S1 (IOC4_SIO_IR_S1_TX_MT | \
+ IOC4_SIO_IR_S1_RX_FULL | \
+ IOC4_SIO_IR_S1_RX_HIGH | \
+ IOC4_SIO_IR_S1_RX_TIMER | \
+ IOC4_SIO_IR_S1_DELTA_DCD | \
+ IOC4_SIO_IR_S1_DELTA_CTS | \
+ IOC4_SIO_IR_S1_INT | \
+ IOC4_SIO_IR_S1_TX_EXPLICIT)
+#define IOC4_SIO_IR_S2 (IOC4_SIO_IR_S2_TX_MT | \
+ IOC4_SIO_IR_S2_RX_FULL | \
+ IOC4_SIO_IR_S2_RX_HIGH | \
+ IOC4_SIO_IR_S2_RX_TIMER | \
+ IOC4_SIO_IR_S2_DELTA_DCD | \
+ IOC4_SIO_IR_S2_DELTA_CTS | \
+ IOC4_SIO_IR_S2_INT | \
+ IOC4_SIO_IR_S2_TX_EXPLICIT)
+#define IOC4_SIO_IR_S3 (IOC4_SIO_IR_S3_TX_MT | \
+ IOC4_SIO_IR_S3_RX_FULL | \
+ IOC4_SIO_IR_S3_RX_HIGH | \
+ IOC4_SIO_IR_S3_RX_TIMER | \
+ IOC4_SIO_IR_S3_DELTA_DCD | \
+ IOC4_SIO_IR_S3_DELTA_CTS | \
+ IOC4_SIO_IR_S3_INT | \
+ IOC4_SIO_IR_S3_TX_EXPLICIT)
+
+/* Bitmasks for IOC4_OTHER_IR, IOC4_OTHER_IEC, and IOC4_OTHER_IES */
+#define IOC4_OTHER_IR_ATA_INT 0x00000001 /* ATAPI intr pass-thru */
+#define IOC4_OTHER_IR_ATA_MEMERR 0x00000002 /* ATAPI DMA PCI error */
+#define IOC4_OTHER_IR_S0_MEMERR 0x00000004 /* Port 0 PCI error */
+#define IOC4_OTHER_IR_S1_MEMERR 0x00000008 /* Port 1 PCI error */
+#define IOC4_OTHER_IR_S2_MEMERR 0x00000010 /* Port 2 PCI error */
+#define IOC4_OTHER_IR_S3_MEMERR 0x00000020 /* Port 3 PCI error */
+
+/* Bitmasks for IOC4_SIO_CR */
+#define IOC4_SIO_CR_CMD_PULSE_SHIFT 0 /* byte bus strobe shift */
+#define IOC4_SIO_CR_ARB_DIAG_TX0 0x00000000
+#define IOC4_SIO_CR_ARB_DIAG_RX0 0x00000010
+#define IOC4_SIO_CR_ARB_DIAG_TX1 0x00000020
+#define IOC4_SIO_CR_ARB_DIAG_RX1 0x00000030
+#define IOC4_SIO_CR_ARB_DIAG_TX2 0x00000040
+#define IOC4_SIO_CR_ARB_DIAG_RX2 0x00000050
+#define IOC4_SIO_CR_ARB_DIAG_TX3 0x00000060
+#define IOC4_SIO_CR_ARB_DIAG_RX3 0x00000070
+#define IOC4_SIO_CR_SIO_DIAG_IDLE 0x00000080 /* 0 -> active request among
+ serial ports (ro) */
+/* Defs for some of the generic I/O pins */
+#define IOC4_GPCR_UART0_MODESEL 0x10 /* Pin is output to port 0
+ mode sel */
+#define IOC4_GPCR_UART1_MODESEL 0x20 /* Pin is output to port 1
+ mode sel */
+#define IOC4_GPCR_UART2_MODESEL 0x40 /* Pin is output to port 2
+ mode sel */
+#define IOC4_GPCR_UART3_MODESEL 0x80 /* Pin is output to port 3
+ mode sel */
+
+#define IOC4_GPPR_UART0_MODESEL_PIN 4 /* GIO pin controlling
+ uart 0 mode select */
+#define IOC4_GPPR_UART1_MODESEL_PIN 5 /* GIO pin controlling
+ uart 1 mode select */
+#define IOC4_GPPR_UART2_MODESEL_PIN 6 /* GIO pin controlling
+ uart 2 mode select */
+#define IOC4_GPPR_UART3_MODESEL_PIN 7 /* GIO pin controlling
+ uart 3 mode select */
+
+/* Bitmasks for serial RX status byte */
+#define IOC4_RXSB_OVERRUN 0x01 /* Char(s) lost */
+#define IOC4_RXSB_PAR_ERR 0x02 /* Parity error */
+#define IOC4_RXSB_FRAME_ERR 0x04 /* Framing error */
+#define IOC4_RXSB_BREAK 0x08 /* Break character */
+#define IOC4_RXSB_CTS 0x10 /* State of CTS */
+#define IOC4_RXSB_DCD 0x20 /* State of DCD */
+#define IOC4_RXSB_MODEM_VALID 0x40 /* DCD, CTS, and OVERRUN are valid */
+#define IOC4_RXSB_DATA_VALID 0x80 /* Data byte, FRAME_ERR PAR_ERR
+ * & BREAK valid */
+
+/* Bitmasks for serial TX control byte */
+#define IOC4_TXCB_INT_WHEN_DONE 0x20 /* Interrupt after this byte is sent */
+#define IOC4_TXCB_INVALID 0x00 /* Byte is invalid */
+#define IOC4_TXCB_VALID 0x40 /* Byte is valid */
+#define IOC4_TXCB_MCR 0x80 /* Data<7:0> to modem control reg */
+#define IOC4_TXCB_DELAY 0xc0 /* Delay data<7:0> mSec */
+
+/* Bitmasks for IOC4_SBBR_L */
+#define IOC4_SBBR_L_SIZE 0x00000001 /* 0 == 1KB rings, 1 == 4KB rings */
+
+/* Bitmasks for IOC4_SSCR_<3:0> */
+#define IOC4_SSCR_RX_THRESHOLD 0x000001ff /* Hiwater mark */
+#define IOC4_SSCR_TX_TIMER_BUSY 0x00010000 /* TX timer in progress */
+#define IOC4_SSCR_HFC_EN 0x00020000 /* Hardware flow control enabled */
+#define IOC4_SSCR_RX_RING_DCD 0x00040000 /* Post RX record on delta-DCD */
+#define IOC4_SSCR_RX_RING_CTS 0x00080000 /* Post RX record on delta-CTS */
+#define IOC4_SSCR_DIAG 0x00200000 /* Bypass clock divider for sim */
+#define IOC4_SSCR_RX_DRAIN 0x08000000 /* Drain RX buffer to memory */
+#define IOC4_SSCR_DMA_EN 0x10000000 /* Enable ring buffer DMA */
+#define IOC4_SSCR_DMA_PAUSE 0x20000000 /* Pause DMA */
+#define IOC4_SSCR_PAUSE_STATE 0x40000000 /* Sets when PAUSE takes effect */
+#define IOC4_SSCR_RESET 0x80000000 /* Reset DMA channels */
+
+/* All producer/comsumer pointers are the same bitfield */
+#define IOC4_PROD_CONS_PTR_4K 0x00000ff8 /* For 4K buffers */
+#define IOC4_PROD_CONS_PTR_1K 0x000003f8 /* For 1K buffers */
+#define IOC4_PROD_CONS_PTR_OFF 3
+
+/* Bitmasks for IOC4_SRCIR_<3:0> */
+#define IOC4_SRCIR_ARM 0x80000000 /* Arm RX timer */
+
+/* Bitmasks for IOC4_SHADOW_<3:0> */
+#define IOC4_SHADOW_DR 0x00000001 /* Data ready */
+#define IOC4_SHADOW_OE 0x00000002 /* Overrun error */
+#define IOC4_SHADOW_PE 0x00000004 /* Parity error */
+#define IOC4_SHADOW_FE 0x00000008 /* Framing error */
+#define IOC4_SHADOW_BI 0x00000010 /* Break interrupt */
+#define IOC4_SHADOW_THRE 0x00000020 /* Xmit holding register empty */
+#define IOC4_SHADOW_TEMT 0x00000040 /* Xmit shift register empty */
+#define IOC4_SHADOW_RFCE 0x00000080 /* Char in RX fifo has an error */
+#define IOC4_SHADOW_DCTS 0x00010000 /* Delta clear to send */
+#define IOC4_SHADOW_DDCD 0x00080000 /* Delta data carrier detect */
+#define IOC4_SHADOW_CTS 0x00100000 /* Clear to send */
+#define IOC4_SHADOW_DCD 0x00800000 /* Data carrier detect */
+#define IOC4_SHADOW_DTR 0x01000000 /* Data terminal ready */
+#define IOC4_SHADOW_RTS 0x02000000 /* Request to send */
+#define IOC4_SHADOW_OUT1 0x04000000 /* 16550 OUT1 bit */
+#define IOC4_SHADOW_OUT2 0x08000000 /* 16550 OUT2 bit */
+#define IOC4_SHADOW_LOOP 0x10000000 /* Loopback enabled */
+
+/* Bitmasks for IOC4_SRTR_<3:0> */
+#define IOC4_SRTR_CNT 0x00000fff /* Reload value for RX timer */
+#define IOC4_SRTR_CNT_VAL 0x0fff0000 /* Current value of RX timer */
+#define IOC4_SRTR_CNT_VAL_SHIFT 16
+#define IOC4_SRTR_HZ 16000 /* SRTR clock frequency */
+
+/* Serial port register map used for DMA and PIO serial I/O */
+struct ioc4_serialregs {
+ uint32_t sscr;
+ uint32_t stpir;
+ uint32_t stcir;
+ uint32_t srpir;
+ uint32_t srcir;
+ uint32_t srtr;
+ uint32_t shadow;
+};
+
+/* IOC4 UART register map */
+struct ioc4_uartregs {
+ char i4u_lcr;
+ union {
+ char iir; /* read only */
+ char fcr; /* write only */
+ } u3;
+ union {
+ char ier; /* DLAB == 0 */
+ char dlm; /* DLAB == 1 */
+ } u2;
+ union {
+ char rbr; /* read only, DLAB == 0 */
+ char thr; /* write only, DLAB == 0 */
+ char dll; /* DLAB == 1 */
+ } u1;
+ char i4u_scr;
+ char i4u_msr;
+ char i4u_lsr;
+ char i4u_mcr;
+};
+
+/* short names */
+#define i4u_dll u1.dll
+#define i4u_ier u2.ier
+#define i4u_dlm u2.dlm
+#define i4u_fcr u3.fcr
+
+/* PCI memory space register map addressed using pci_bar0 */
+struct ioc4_memregs {
+ struct ioc4_mem {
+ /* Miscellaneous IOC4 registers */
+ uint32_t pci_err_addr_l;
+ uint32_t pci_err_addr_h;
+ uint32_t sio_ir;
+ uint32_t other_ir;
+
+ /* These registers are read-only for general kernel code. */
+ uint32_t sio_ies_ro;
+ uint32_t other_ies_ro;
+ uint32_t sio_iec_ro;
+ uint32_t other_iec_ro;
+ uint32_t sio_cr;
+ uint32_t misc_fill1;
+ uint32_t int_out;
+ uint32_t misc_fill2;
+ uint32_t gpcr_s;
+ uint32_t gpcr_c;
+ uint32_t gpdr;
+ uint32_t misc_fill3;
+ uint32_t gppr_0;
+ uint32_t gppr_1;
+ uint32_t gppr_2;
+ uint32_t gppr_3;
+ uint32_t gppr_4;
+ uint32_t gppr_5;
+ uint32_t gppr_6;
+ uint32_t gppr_7;
+ } ioc4_mem;
+
+ char misc_fill4[0x100 - 0x5C - 4];
+
+ /* ATA/ATAP registers */
+ uint32_t ata_notused[9];
+ char ata_fill1[0x140 - 0x120 - 4];
+ uint32_t ata_notused1[8];
+ char ata_fill2[0x200 - 0x15C - 4];
+
+ /* Keyboard and mouse registers */
+ uint32_t km_notused[5];;
+ char km_fill1[0x300 - 0x210 - 4];
+
+ /* Serial port registers used for DMA serial I/O */
+ struct ioc4_serial {
+ uint32_t sbbr01_l;
+ uint32_t sbbr01_h;
+ uint32_t sbbr23_l;
+ uint32_t sbbr23_h;
+
+ struct ioc4_serialregs port_0;
+ struct ioc4_serialregs port_1;
+ struct ioc4_serialregs port_2;
+ struct ioc4_serialregs port_3;
+ struct ioc4_uartregs uart_0;
+ struct ioc4_uartregs uart_1;
+ struct ioc4_uartregs uart_2;
+ struct ioc4_uartregs uart_3;
+ } ioc4_serial;
+};
+
+/* UART clock speed */
+#define IOC4_SER_XIN_CLK IOC4_SER_XIN_CLK_66
+#define IOC4_SER_XIN_CLK_66 66666667
+#define IOC4_SER_XIN_CLK_33 33333333
+
+#define IOC4_W_IES 0
+#define IOC4_W_IEC 1
+
+typedef void ioc4_intr_func_f(void *, uint32_t);
+typedef ioc4_intr_func_f *ioc4_intr_func_t;
+
+/* defining this will get you LOTS of great debug info */
+//#define DEBUG_INTERRUPTS
+#define DPRINT_CONFIG(_x...) ;
+//#define DPRINT_CONFIG(_x...) printk _x
+
+/* number of characters left in xmit buffer before we ask for more */
+#define WAKEUP_CHARS 256
+
+/* number of characters we want to transmit to the lower level at a time */
+#define IOC4_MAX_CHARS 128
+
+/* Device name we're using */
+#define DEVICE_NAME "ttyIOC"
+#define DEVICE_MAJOR 204
+#define DEVICE_MINOR 50
+
+/* register offsets */
+#define IOC4_SERIAL_OFFSET 0x300
+
+/* flags for next_char_state */
+#define NCS_BREAK 0x1
+#define NCS_PARITY 0x2
+#define NCS_FRAMING 0x4
+#define NCS_OVERRUN 0x8
+
+/* cause we need SOME parameters ... */
+#define MIN_BAUD_SUPPORTED 1200
+#define MAX_BAUD_SUPPORTED 115200
+
+/* protocol types supported */
+enum sio_proto {
+ PROTO_RS232,
+ PROTO_RS422
+};
+
+/* Notification types */
+#define N_DATA_READY 0x01
+#define N_OUTPUT_LOWAT 0x02
+#define N_BREAK 0x04
+#define N_PARITY_ERROR 0x08
+#define N_FRAMING_ERROR 0x10
+#define N_OVERRUN_ERROR 0x20
+#define N_DDCD 0x40
+#define N_DCTS 0x80
+
+#define N_ALL_INPUT (N_DATA_READY | N_BREAK | \
+ N_PARITY_ERROR | N_FRAMING_ERROR | \
+ N_OVERRUN_ERROR | N_DDCD | N_DCTS)
+
+#define N_ALL_OUTPUT N_OUTPUT_LOWAT
+
+#define N_ALL_ERRORS (N_PARITY_ERROR | N_FRAMING_ERROR | N_OVERRUN_ERROR)
+
+#define N_ALL (N_DATA_READY | N_OUTPUT_LOWAT | N_BREAK | \
+ N_PARITY_ERROR | N_FRAMING_ERROR | \
+ N_OVERRUN_ERROR | N_DDCD | N_DCTS)
+
+#define SER_DIVISOR(_x, clk) (((clk) + (_x) * 8) / ((_x) * 16))
+#define DIVISOR_TO_BAUD(div, clk) ((clk) / 16 / (div))
+
+/* Some masks */
+#define LCR_MASK_BITS_CHAR (UART_LCR_WLEN5 | UART_LCR_WLEN6 \
+ | UART_LCR_WLEN7 | UART_LCR_WLEN8)
+#define LCR_MASK_STOP_BITS (UART_LCR_STOP)
+
+#define PENDING(_p) (readl(&(_p)->ip_mem->sio_ir) & _p->ip_ienb)
+#define READ_SIO_IR(_p) readl(&(_p)->ip_mem->sio_ir)
+
+/* Default to 4k buffers */
+#ifdef IOC4_1K_BUFFERS
+#define RING_BUF_SIZE 1024
+#define IOC4_BUF_SIZE_BIT 0
+#define PROD_CONS_MASK IOC4_PROD_CONS_PTR_1K
+#else
+#define RING_BUF_SIZE 4096
+#define IOC4_BUF_SIZE_BIT IOC4_SBBR_L_SIZE
+#define PROD_CONS_MASK IOC4_PROD_CONS_PTR_4K
+#endif
+
+#define TOTAL_RING_BUF_SIZE (RING_BUF_SIZE * 4)
+
+/*
+ * This is the entry saved by the driver - one per card
+ */
+struct ioc4_control {
+ int ic_irq;
+ struct {
+ /* uart ports are allocated here */
+ struct uart_port icp_uart_port;
+ /* Handy reference material */
+ struct ioc4_port *icp_port;
+ } ic_port[IOC4_NUM_SERIAL_PORTS];
+ struct ioc4_soft *ic_soft;
+};
+
+/*
+ * per-IOC4 data structure
+ */
+#define MAX_IOC4_INTR_ENTS (8 * sizeof(uint32_t))
+struct ioc4_soft {
+ struct ioc4_mem __iomem *is_ioc4_mem_addr;
+ struct ioc4_serial __iomem *is_ioc4_serial_addr;
+
+ /* Each interrupt type has an entry in the array */
+ struct ioc4_intr_type {
+
+ /*
+ * Each in-use entry in this array contains at least
+ * one nonzero bit in sd_bits; no two entries in this
+ * array have overlapping sd_bits values.
+ */
+ struct ioc4_intr_info {
+ uint32_t sd_bits;
+ ioc4_intr_func_f *sd_intr;
+ void *sd_info;
+ } is_intr_info[MAX_IOC4_INTR_ENTS];
+
+ /* Number of entries active in the above array */
+ atomic_t is_num_intrs;
+ } is_intr_type[IOC4_NUM_INTR_TYPES];
+
+ /* is_ir_lock must be held while
+ * modifying sio_ie values, so
+ * we can be sure that sio_ie is
+ * not changing when we read it
+ * along with sio_ir.
+ */
+ spinlock_t is_ir_lock; /* SIO_IE[SC] mod lock */
+};
+
+/* Local port info for each IOC4 serial ports */
+struct ioc4_port {
+ struct uart_port *ip_port;
+ /* Back ptrs for this port */
+ struct ioc4_control *ip_control;
+ struct pci_dev *ip_pdev;
+ struct ioc4_soft *ip_ioc4_soft;
+
+ /* pci mem addresses */
+ struct ioc4_mem __iomem *ip_mem;
+ struct ioc4_serial __iomem *ip_serial;
+ struct ioc4_serialregs __iomem *ip_serial_regs;
+ struct ioc4_uartregs __iomem *ip_uart_regs;
+
+ /* Ring buffer page for this port */
+ dma_addr_t ip_dma_ringbuf;
+ /* vaddr of ring buffer */
+ struct ring_buffer *ip_cpu_ringbuf;
+
+ /* Rings for this port */
+ struct ring *ip_inring;
+ struct ring *ip_outring;
+
+ /* Hook to port specific values */
+ struct hooks *ip_hooks;
+
+ spinlock_t ip_lock;
+
+ /* Various rx/tx parameters */
+ int ip_baud;
+ int ip_tx_lowat;
+ int ip_rx_timeout;
+
+ /* Copy of notification bits */
+ int ip_notify;
+
+ /* Shadow copies of various registers so we don't need to PIO
+ * read them constantly
+ */
+ uint32_t ip_ienb; /* Enabled interrupts */
+ uint32_t ip_sscr;
+ uint32_t ip_tx_prod;
+ uint32_t ip_rx_cons;
+ int ip_pci_bus_speed;
+ unsigned char ip_flags;
+};
+
+/* tx low water mark. We need to notify the driver whenever tx is getting
+ * close to empty so it can refill the tx buffer and keep things going.
+ * Let's assume that if we interrupt 1 ms before the tx goes idle, we'll
+ * have no trouble getting in more chars in time (I certainly hope so).
+ */
+#define TX_LOWAT_LATENCY 1000
+#define TX_LOWAT_HZ (1000000 / TX_LOWAT_LATENCY)
+#define TX_LOWAT_CHARS(baud) (baud / 10 / TX_LOWAT_HZ)
+
+/* Flags per port */
+#define INPUT_HIGH 0x01
+#define DCD_ON 0x02
+#define LOWAT_WRITTEN 0x04
+#define READ_ABORTED 0x08
+
+/* Since each port has different register offsets and bitmasks
+ * for everything, we'll store those that we need in tables so we
+ * don't have to be constantly checking the port we are dealing with.
+ */
+struct hooks {
+ uint32_t intr_delta_dcd;
+ uint32_t intr_delta_cts;
+ uint32_t intr_tx_mt;
+ uint32_t intr_rx_timer;
+ uint32_t intr_rx_high;
+ uint32_t intr_tx_explicit;
+ uint32_t intr_dma_error;
+ uint32_t intr_clear;
+ uint32_t intr_all;
+ char rs422_select_pin;
+};
+
+static struct hooks hooks_array[IOC4_NUM_SERIAL_PORTS] = {
+ /* Values for port 0 */
+ {
+ IOC4_SIO_IR_S0_DELTA_DCD, IOC4_SIO_IR_S0_DELTA_CTS,
+ IOC4_SIO_IR_S0_TX_MT, IOC4_SIO_IR_S0_RX_TIMER,
+ IOC4_SIO_IR_S0_RX_HIGH, IOC4_SIO_IR_S0_TX_EXPLICIT,
+ IOC4_OTHER_IR_S0_MEMERR,
+ (IOC4_SIO_IR_S0_TX_MT | IOC4_SIO_IR_S0_RX_FULL |
+ IOC4_SIO_IR_S0_RX_HIGH | IOC4_SIO_IR_S0_RX_TIMER |
+ IOC4_SIO_IR_S0_DELTA_DCD | IOC4_SIO_IR_S0_DELTA_CTS |
+ IOC4_SIO_IR_S0_INT | IOC4_SIO_IR_S0_TX_EXPLICIT),
+ IOC4_SIO_IR_S0, IOC4_GPPR_UART0_MODESEL_PIN,
+ },
+
+ /* Values for port 1 */
+ {
+ IOC4_SIO_IR_S1_DELTA_DCD, IOC4_SIO_IR_S1_DELTA_CTS,
+ IOC4_SIO_IR_S1_TX_MT, IOC4_SIO_IR_S1_RX_TIMER,
+ IOC4_SIO_IR_S1_RX_HIGH, IOC4_SIO_IR_S1_TX_EXPLICIT,
+ IOC4_OTHER_IR_S1_MEMERR,
+ (IOC4_SIO_IR_S1_TX_MT | IOC4_SIO_IR_S1_RX_FULL |
+ IOC4_SIO_IR_S1_RX_HIGH | IOC4_SIO_IR_S1_RX_TIMER |
+ IOC4_SIO_IR_S1_DELTA_DCD | IOC4_SIO_IR_S1_DELTA_CTS |
+ IOC4_SIO_IR_S1_INT | IOC4_SIO_IR_S1_TX_EXPLICIT),
+ IOC4_SIO_IR_S1, IOC4_GPPR_UART1_MODESEL_PIN,
+ },
+
+ /* Values for port 2 */
+ {
+ IOC4_SIO_IR_S2_DELTA_DCD, IOC4_SIO_IR_S2_DELTA_CTS,
+ IOC4_SIO_IR_S2_TX_MT, IOC4_SIO_IR_S2_RX_TIMER,
+ IOC4_SIO_IR_S2_RX_HIGH, IOC4_SIO_IR_S2_TX_EXPLICIT,
+ IOC4_OTHER_IR_S2_MEMERR,
+ (IOC4_SIO_IR_S2_TX_MT | IOC4_SIO_IR_S2_RX_FULL |
+ IOC4_SIO_IR_S2_RX_HIGH | IOC4_SIO_IR_S2_RX_TIMER |
+ IOC4_SIO_IR_S2_DELTA_DCD | IOC4_SIO_IR_S2_DELTA_CTS |
+ IOC4_SIO_IR_S2_INT | IOC4_SIO_IR_S2_TX_EXPLICIT),
+ IOC4_SIO_IR_S2, IOC4_GPPR_UART2_MODESEL_PIN,
+ },
+
+ /* Values for port 3 */
+ {
+ IOC4_SIO_IR_S3_DELTA_DCD, IOC4_SIO_IR_S3_DELTA_CTS,
+ IOC4_SIO_IR_S3_TX_MT, IOC4_SIO_IR_S3_RX_TIMER,
+ IOC4_SIO_IR_S3_RX_HIGH, IOC4_SIO_IR_S3_TX_EXPLICIT,
+ IOC4_OTHER_IR_S3_MEMERR,
+ (IOC4_SIO_IR_S3_TX_MT | IOC4_SIO_IR_S3_RX_FULL |
+ IOC4_SIO_IR_S3_RX_HIGH | IOC4_SIO_IR_S3_RX_TIMER |
+ IOC4_SIO_IR_S3_DELTA_DCD | IOC4_SIO_IR_S3_DELTA_CTS |
+ IOC4_SIO_IR_S3_INT | IOC4_SIO_IR_S3_TX_EXPLICIT),
+ IOC4_SIO_IR_S3, IOC4_GPPR_UART3_MODESEL_PIN,
+ }
+};
+
+/* A ring buffer entry */
+struct ring_entry {
+ union {
+ struct {
+ uint32_t alldata;
+ uint32_t allsc;
+ } all;
+ struct {
+ char data[4]; /* data bytes */
+ char sc[4]; /* status/control */
+ } s;
+ } u;
+};
+
+/* Test the valid bits in any of the 4 sc chars using "allsc" member */
+#define RING_ANY_VALID \
+ ((uint32_t)(IOC4_RXSB_MODEM_VALID | IOC4_RXSB_DATA_VALID) * 0x01010101)
+
+#define ring_sc u.s.sc
+#define ring_data u.s.data
+#define ring_allsc u.all.allsc
+
+/* Number of entries per ring buffer. */
+#define ENTRIES_PER_RING (RING_BUF_SIZE / (int) sizeof(struct ring_entry))
+
+/* An individual ring */
+struct ring {
+ struct ring_entry entries[ENTRIES_PER_RING];
+};
+
+/* The whole enchilada */
+struct ring_buffer {
+ struct ring TX_0_OR_2;
+ struct ring RX_0_OR_2;
+ struct ring TX_1_OR_3;
+ struct ring RX_1_OR_3;
+};
+
+/* Get a ring from a port struct */
+#define RING(_p, _wh) &(((struct ring_buffer *)((_p)->ip_cpu_ringbuf))->_wh)
+
+/* Infinite loop detection.
+ */
+#define MAXITER 10000000
+
+/* Prototypes */
+static void receive_chars(struct uart_port *);
+static void handle_intr(void *arg, uint32_t sio_ir);
+
+/**
+ * write_ireg - write the interrupt regs
+ * @ioc4_soft: ptr to soft struct for this port
+ * @val: value to write
+ * @which: which register
+ * @type: which ireg set
+ */
+static inline void
+write_ireg(struct ioc4_soft *ioc4_soft, uint32_t val, int which, int type)
+{
+ struct ioc4_mem __iomem *mem = ioc4_soft->is_ioc4_mem_addr;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc4_soft->is_ir_lock, flags);
+
+ switch (type) {
+ case IOC4_SIO_INTR_TYPE:
+ switch (which) {
+ case IOC4_W_IES:
+ writel(val, &mem->sio_ies_ro);
+ break;
+
+ case IOC4_W_IEC:
+ writel(val, &mem->sio_iec_ro);
+ break;
+ }
+ break;
+
+ case IOC4_OTHER_INTR_TYPE:
+ switch (which) {
+ case IOC4_W_IES:
+ writel(val, &mem->other_ies_ro);
+ break;
+
+ case IOC4_W_IEC:
+ writel(val, &mem->other_iec_ro);
+ break;
+ }
+ break;
+
+ default:
+ break;
+ }
+ spin_unlock_irqrestore(&ioc4_soft->is_ir_lock, flags);
+}
+
+/**
+ * set_baud - Baud rate setting code
+ * @port: port to set
+ * @baud: baud rate to use
+ */
+static int set_baud(struct ioc4_port *port, int baud)
+{
+ int actual_baud;
+ int diff;
+ int lcr;
+ unsigned short divisor;
+ struct ioc4_uartregs __iomem *uart;
+
+ divisor = SER_DIVISOR(baud, port->ip_pci_bus_speed);
+ if (!divisor)
+ return 1;
+ actual_baud = DIVISOR_TO_BAUD(divisor, port->ip_pci_bus_speed);
+
+ diff = actual_baud - baud;
+ if (diff < 0)
+ diff = -diff;
+
+ /* If we're within 1%, we've found a match */
+ if (diff * 100 > actual_baud)
+ return 1;
+
+ uart = port->ip_uart_regs;
+ lcr = readb(&uart->i4u_lcr);
+ writeb(lcr | UART_LCR_DLAB, &uart->i4u_lcr);
+ writeb((unsigned char)divisor, &uart->i4u_dll);
+ writeb((unsigned char)(divisor >> 8), &uart->i4u_dlm);
+ writeb(lcr, &uart->i4u_lcr);
+ return 0;
+}
+
+
+/**
+ * get_ioc4_port - given a uart port, return the control structure
+ * @port: uart port
+ */
+static struct ioc4_port *get_ioc4_port(struct uart_port *the_port)
+{
+ struct ioc4_control *control = dev_get_drvdata(the_port->dev);
+ int ii;
+
+ if (control) {
+ for ( ii = 0; ii < IOC4_NUM_SERIAL_PORTS; ii++ ) {
+ if (!control->ic_port[ii].icp_port)
+ continue;
+ if (the_port == control->ic_port[ii].icp_port->ip_port)
+ return control->ic_port[ii].icp_port;
+ }
+ }
+ return NULL;
+}
+
+/* The IOC4 hardware provides no atomic way to determine if interrupts
+ * are pending since two reads are required to do so. The handler must
+ * read the SIO_IR and the SIO_IES, and take the logical and of the
+ * two. When this value is zero, all interrupts have been serviced and
+ * the handler may return.
+ *
+ * This has the unfortunate "hole" that, if some other CPU or
+ * some other thread or some higher level interrupt manages to
+ * modify SIO_IE between our reads of SIO_IR and SIO_IE, we may
+ * think we have observed SIO_IR&SIO_IE==0 when in fact this
+ * condition never really occurred.
+ *
+ * To solve this, we use a simple spinlock that must be held
+ * whenever modifying SIO_IE; holding this lock while observing
+ * both SIO_IR and SIO_IE guarantees that we do not falsely
+ * conclude that no enabled interrupts are pending.
+ */
+
+static inline uint32_t
+pending_intrs(struct ioc4_soft *soft, int type)
+{
+ struct ioc4_mem __iomem *mem = soft->is_ioc4_mem_addr;
+ unsigned long flag;
+ uint32_t intrs = 0;
+
+ BUG_ON(!((type == IOC4_SIO_INTR_TYPE)
+ || (type == IOC4_OTHER_INTR_TYPE)));
+
+ spin_lock_irqsave(&soft->is_ir_lock, flag);
+
+ switch (type) {
+ case IOC4_SIO_INTR_TYPE:
+ intrs = readl(&mem->sio_ir) & readl(&mem->sio_ies_ro);
+ break;
+
+ case IOC4_OTHER_INTR_TYPE:
+ intrs = readl(&mem->other_ir) & readl(&mem->other_ies_ro);
+
+ /* Don't process any ATA interrupte */
+ intrs &= ~(IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR);
+ break;
+
+ default:
+ break;
+ }
+ spin_unlock_irqrestore(&soft->is_ir_lock, flag);
+ return intrs;
+}
+
+/**
+ * port_init - Initialize the sio and ioc4 hardware for a given port
+ * called per port from attach...
+ * @port: port to initialize
+ */
+static int inline port_init(struct ioc4_port *port)
+{
+ uint32_t sio_cr;
+ struct hooks *hooks = port->ip_hooks;
+ struct ioc4_uartregs __iomem *uart;
+
+ /* Idle the IOC4 serial interface */
+ writel(IOC4_SSCR_RESET, &port->ip_serial_regs->sscr);
+
+ /* Wait until any pending bus activity for this port has ceased */
+ do
+ sio_cr = readl(&port->ip_mem->sio_cr);
+ while (!(sio_cr & IOC4_SIO_CR_SIO_DIAG_IDLE));
+
+ /* Finish reset sequence */
+ writel(0, &port->ip_serial_regs->sscr);
+
+ /* Once RESET is done, reload cached tx_prod and rx_cons values
+ * and set rings to empty by making prod == cons
+ */
+ port->ip_tx_prod = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK;
+ writel(port->ip_tx_prod, &port->ip_serial_regs->stpir);
+ port->ip_rx_cons = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK;
+ writel(port->ip_rx_cons, &port->ip_serial_regs->srcir);
+
+ /* Disable interrupts for this 16550 */
+ uart = port->ip_uart_regs;
+ writeb(0, &uart->i4u_lcr);
+ writeb(0, &uart->i4u_ier);
+
+ /* Set the default baud */
+ set_baud(port, port->ip_baud);
+
+ /* Set line control to 8 bits no parity */
+ writeb(UART_LCR_WLEN8 | 0, &uart->i4u_lcr);
+ /* UART_LCR_STOP == 1 stop */
+
+ /* Enable the FIFOs */
+ writeb(UART_FCR_ENABLE_FIFO, &uart->i4u_fcr);
+ /* then reset 16550 FIFOs */
+ writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
+ &uart->i4u_fcr);
+
+ /* Clear modem control register */
+ writeb(0, &uart->i4u_mcr);
+
+ /* Clear deltas in modem status register */
+ readb(&uart->i4u_msr);
+
+ /* Only do this once per port pair */
+ if (port->ip_hooks == &hooks_array[0]
+ || port->ip_hooks == &hooks_array[2]) {
+ unsigned long ring_pci_addr;
+ uint32_t __iomem *sbbr_l;
+ uint32_t __iomem *sbbr_h;
+
+ if (port->ip_hooks == &hooks_array[0]) {
+ sbbr_l = &port->ip_serial->sbbr01_l;
+ sbbr_h = &port->ip_serial->sbbr01_h;
+ } else {
+ sbbr_l = &port->ip_serial->sbbr23_l;
+ sbbr_h = &port->ip_serial->sbbr23_h;
+ }
+
+ ring_pci_addr = (unsigned long __iomem)port->ip_dma_ringbuf;
+ DPRINT_CONFIG(("%s: ring_pci_addr 0x%lx\n",
+ __FUNCTION__, ring_pci_addr));
+
+ writel((unsigned int)((uint64_t)ring_pci_addr >> 32), sbbr_h);
+ writel((unsigned int)ring_pci_addr | IOC4_BUF_SIZE_BIT, sbbr_l);
+ }
+
+ /* Set the receive timeout value to 10 msec */
+ writel(IOC4_SRTR_HZ / 100, &port->ip_serial_regs->srtr);
+
+ /* Set rx threshold, enable DMA */
+ /* Set high water mark at 3/4 of full ring */
+ port->ip_sscr = (ENTRIES_PER_RING * 3 / 4);
+ writel(port->ip_sscr, &port->ip_serial_regs->sscr);
+
+ /* Disable and clear all serial related interrupt bits */
+ write_ireg(port->ip_ioc4_soft, hooks->intr_clear,
+ IOC4_W_IEC, IOC4_SIO_INTR_TYPE);
+ port->ip_ienb &= ~hooks->intr_clear;
+ writel(hooks->intr_clear, &port->ip_mem->sio_ir);
+ return 0;
+}
+
+/**
+ * handle_dma_error_intr - service any pending DMA error interrupts for the
+ * given port - 2nd level called via sd_intr
+ * @arg: handler arg
+ * @other_ir: ioc4regs
+ */
+static void handle_dma_error_intr(void *arg, uint32_t other_ir)
+{
+ struct ioc4_port *port = (struct ioc4_port *)arg;
+ struct hooks *hooks = port->ip_hooks;
+ unsigned int flags;
+
+ spin_lock_irqsave(&port->ip_lock, flags);
+
+ /* ACK the interrupt */
+ writel(hooks->intr_dma_error, &port->ip_mem->other_ir);
+
+ if (readl(&port->ip_mem->pci_err_addr_l) & IOC4_PCI_ERR_ADDR_VLD) {
+ printk(KERN_ERR
+ "PCI error address is 0x%lx, "
+ "master is serial port %c %s\n",
+ (((uint64_t)readl(&port->ip_mem->pci_err_addr_h)
+ << 32)
+ | readl(&port->ip_mem->pci_err_addr_l))
+ & IOC4_PCI_ERR_ADDR_ADDR_MSK, '1' +
+ ((char)(readl(&port->ip_mem-> pci_err_addr_l) &
+ IOC4_PCI_ERR_ADDR_MST_NUM_MSK) >> 1),
+ (readl(&port->ip_mem->pci_err_addr_l)
+ & IOC4_PCI_ERR_ADDR_MST_TYP_MSK)
+ ? "RX" : "TX");
+
+ if (readl(&port->ip_mem->pci_err_addr_l)
+ & IOC4_PCI_ERR_ADDR_MUL_ERR) {
+ printk(KERN_ERR
+ "Multiple errors occurred\n");
+ }
+ }
+ spin_unlock_irqrestore(&port->ip_lock, flags);
+
+ /* Re-enable DMA error interrupts */
+ write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error, IOC4_W_IES,
+ IOC4_OTHER_INTR_TYPE);
+}
+
+/**
+ * intr_connect - interrupt connect function
+ * @soft: soft struct for this card
+ * @type: interrupt type
+ * @intrbits: bit pattern to set
+ * @intr: handler function
+ * @info: handler arg
+ */
+static void
+intr_connect(struct ioc4_soft *soft, int type,
+ uint32_t intrbits, ioc4_intr_func_f * intr, void *info)
+{
+ int i;
+ struct ioc4_intr_info *intr_ptr;
+
+ BUG_ON(!((type == IOC4_SIO_INTR_TYPE)
+ || (type == IOC4_OTHER_INTR_TYPE)));
+
+ i = atomic_inc(&soft-> is_intr_type[type].is_num_intrs) - 1;
+ BUG_ON(!(i < MAX_IOC4_INTR_ENTS || (printk("i %d\n", i), 0)));
+
+ /* Save off the lower level interrupt handler */
+ intr_ptr = &soft->is_intr_type[type].is_intr_info[i];
+ intr_ptr->sd_bits = intrbits;
+ intr_ptr->sd_intr = intr;
+ intr_ptr->sd_info = info;
+}
+
+/**
+ * ioc4_intr - Top level IOC4 interrupt handler.
+ * @irq: irq value
+ * @arg: handler arg
+ * @regs: registers
+ */
+static irqreturn_t ioc4_intr(int irq, void *arg, struct pt_regs *regs)
+{
+ struct ioc4_soft *soft;
+ uint32_t this_ir, this_mir;
+ int xx, num_intrs = 0;
+ int intr_type;
+ int handled = 0;
+ struct ioc4_intr_info *ii;
+
+ soft = arg;
+ for (intr_type = 0; intr_type < IOC4_NUM_INTR_TYPES; intr_type++) {
+ num_intrs = (int)atomic_read(
+ &soft->is_intr_type[intr_type].is_num_intrs);
+
+ this_mir = this_ir = pending_intrs(soft, intr_type);
+
+ /* Farm out the interrupt to the various drivers depending on
+ * which interrupt bits are set.
+ */
+ for (xx = 0; xx < num_intrs; xx++) {
+ ii = &soft->is_intr_type[intr_type].is_intr_info[xx];
+ if ((this_mir = this_ir & ii->sd_bits)) {
+ /* Disable owned interrupts, call handler */
+ handled++;
+ write_ireg(soft, ii->sd_bits, IOC4_W_IEC,
+ intr_type);
+ ii->sd_intr(ii->sd_info, this_mir);
+ this_ir &= ~this_mir;
+ }
+ }
+ if (this_ir) {
+ printk(KERN_ERR
+ "unknown IOC4 %s interrupt 0x%x, sio_ir = 0x%x,"
+ " sio_ies = 0x%x, other_ir = 0x%x :"
+ "other_ies = 0x%x\n",
+ (intr_type == IOC4_SIO_INTR_TYPE) ? "sio" :
+ "other", this_ir,
+ readl(&soft->is_ioc4_mem_addr->sio_ir),
+ readl(&soft->is_ioc4_mem_addr->sio_ies_ro),
+ readl(&soft->is_ioc4_mem_addr->other_ir),
+ readl(&soft->is_ioc4_mem_addr->other_ies_ro));
+ }
+ }
+#ifdef DEBUG_INTERRUPTS
+ {
+ struct ioc4_mem __iomem *mem = soft->is_ioc4_mem_addr;
+ spinlock_t *lp = &soft->is_ir_lock;
+ unsigned long flag;
+
+ spin_lock_irqsave(&soft->is_ir_lock, flag);
+ printk ("%s : %d : mem 0x%p sio_ir 0x%x sio_ies_ro 0x%x "
+ "other_ir 0x%x other_ies_ro 0x%x mask 0x%x\n",
+ __FUNCTION__, __LINE__,
+ (void *)mem, readl(&mem->sio_ir),
+ readl(&mem->sio_ies_ro),
+ readl(&mem->other_ir),
+ readl(&mem->other_ies_ro),
+ IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR);
+ spin_unlock_irqrestore(&soft->is_ir_lock, flag);
+ }
+#endif
+ return handled ? IRQ_HANDLED : IRQ_NONE;
+}
+
+/**
+ * ioc4_attach_local - Device initialization.
+ * Called at *_attach() time for each
+ * IOC4 with serial ports in the system.
+ * @control: ioc4_control ptr
+ * @pdev: PCI handle for this device
+ * @soft: soft struct for this device
+ * @ioc4: ioc4 mem space
+ */
+static int inline ioc4_attach_local(struct pci_dev *pdev,
+ struct ioc4_control *control,
+ struct ioc4_soft *soft, void __iomem *ioc4_mem,
+ void __iomem *ioc4_serial)
+{
+ struct ioc4_port *port;
+ struct ioc4_port *ports[IOC4_NUM_SERIAL_PORTS];
+ int port_number;
+ uint16_t ioc4_revid_min = 62;
+ uint16_t ioc4_revid;
+
+ /* IOC4 firmware must be at least rev 62 */
+ pci_read_config_word(pdev, PCI_COMMAND_SPECIAL, &ioc4_revid);
+
+ printk(KERN_INFO "IOC4 firmware revision %d\n", ioc4_revid);
+ if (ioc4_revid < ioc4_revid_min) {
+ printk(KERN_WARNING
+ "IOC4 serial not supported on firmware rev %d, "
+ "please upgrade to rev %d or higher\n",
+ ioc4_revid, ioc4_revid_min);
+ return -EPERM;
+ }
+ BUG_ON(ioc4_mem == NULL);
+ BUG_ON(ioc4_serial == NULL);
+
+ /* Create port structures for each port */
+ for (port_number = 0; port_number < IOC4_NUM_SERIAL_PORTS;
+ port_number++) {
+ port = kmalloc(sizeof(struct ioc4_port), GFP_KERNEL);
+ if (!port) {
+ printk(KERN_WARNING
+ "IOC4 serial memory not available for port\n");
+ return -ENOMEM;
+ }
+ memset(port, 0, sizeof(struct ioc4_port));
+
+ /* we need to remember the previous ones, to point back to
+ * them farther down - setting up the ring buffers.
+ */
+ ports[port_number] = port;
+
+ /* Allocate buffers and jumpstart the hardware. */
+ control->ic_port[port_number].icp_port = port;
+ port->ip_ioc4_soft = soft;
+ port->ip_pdev = pdev;
+ port->ip_ienb = 0;
+ port->ip_pci_bus_speed = IOC4_SER_XIN_CLK;
+ port->ip_baud = 9600;
+ port->ip_control = control;
+ port->ip_mem = ioc4_mem;
+ port->ip_serial = ioc4_serial;
+
+ /* point to the right hook */
+ port->ip_hooks = &hooks_array[port_number];
+
+ /* Get direct hooks to the serial regs and uart regs
+ * for this port
+ */
+ switch (port_number) {
+ case 0:
+ port->ip_serial_regs = &(port->ip_serial->port_0);
+ port->ip_uart_regs = &(port->ip_serial->uart_0);
+ break;
+ case 1:
+ port->ip_serial_regs = &(port->ip_serial->port_1);
+ port->ip_uart_regs = &(port->ip_serial->uart_1);
+ break;
+ case 2:
+ port->ip_serial_regs = &(port->ip_serial->port_2);
+ port->ip_uart_regs = &(port->ip_serial->uart_2);
+ break;
+ default:
+ case 3:
+ port->ip_serial_regs = &(port->ip_serial->port_3);
+ port->ip_uart_regs = &(port->ip_serial->uart_3);
+ break;
+ }
+
+ /* ring buffers are 1 to a pair of ports */
+ if (port_number && (port_number & 1)) {
+ /* odd use the evens buffer */
+ port->ip_dma_ringbuf =
+ ports[port_number - 1]->ip_dma_ringbuf;
+ port->ip_cpu_ringbuf =
+ ports[port_number - 1]->ip_cpu_ringbuf;
+ port->ip_inring = RING(port, RX_1_OR_3);
+ port->ip_outring = RING(port, TX_1_OR_3);
+
+ } else {
+ if (port->ip_dma_ringbuf == 0) {
+ port->ip_cpu_ringbuf = pci_alloc_consistent
+ (pdev, TOTAL_RING_BUF_SIZE,
+ &port->ip_dma_ringbuf);
+
+ }
+ BUG_ON(!((((int64_t)port->ip_dma_ringbuf) &
+ (TOTAL_RING_BUF_SIZE - 1)) == 0));
+ DPRINT_CONFIG(("%s : ip_cpu_ringbuf 0x%p "
+ "ip_dma_ringbuf 0x%p\n",
+ __FUNCTION__,
+ (void *)port->ip_cpu_ringbuf,
+ (void *)port->ip_dma_ringbuf));
+ port->ip_inring = RING(port, RX_0_OR_2);
+ port->ip_outring = RING(port, TX_0_OR_2);
+ }
+ DPRINT_CONFIG(("%s : port %d [addr 0x%p] control 0x%p",
+ __FUNCTION__,
+ port_number, (void *)port, (void *)control));
+ DPRINT_CONFIG((" ip_serial_regs 0x%p ip_uart_regs 0x%p\n",
+ (void *)port->ip_serial_regs,
+ (void *)port->ip_uart_regs));
+
+ /* Initialize the hardware for IOC4 */
+ port_init(port);
+
+ DPRINT_CONFIG(("%s: port_number %d port 0x%p inring 0x%p "
+ "outring 0x%p\n",
+ __FUNCTION__,
+ port_number, (void *)port,
+ (void *)port->ip_inring,
+ (void *)port->ip_outring));
+
+ /* Attach interrupt handlers */
+ intr_connect(soft, IOC4_SIO_INTR_TYPE,
+ GET_SIO_IR(port_number),
+ handle_intr, port);
+
+ intr_connect(soft, IOC4_OTHER_INTR_TYPE,
+ GET_OTHER_IR(port_number),
+ handle_dma_error_intr, port);
+ }
+ return 0;
+}
+
+/**
+ * enable_intrs - enable interrupts
+ * @port: port to enable
+ * @mask: mask to use
+ */
+static void enable_intrs(struct ioc4_port *port, uint32_t mask)
+{
+ struct hooks *hooks = port->ip_hooks;
+
+ if ((port->ip_ienb & mask) != mask) {
+ write_ireg(port->ip_ioc4_soft, mask, IOC4_W_IES,
+ IOC4_SIO_INTR_TYPE);
+ port->ip_ienb |= mask;
+ }
+
+ if (port->ip_ienb)
+ write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error,
+ IOC4_W_IES, IOC4_OTHER_INTR_TYPE);
+}
+
+/**
+ * local_open - local open a port
+ * @port: port to open
+ */
+static inline int local_open(struct ioc4_port *port)
+{
+ int spiniter = 0;
+
+ port->ip_flags = 0;
+
+ /* Pause the DMA interface if necessary */
+ if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
+ writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE,
+ &port->ip_serial_regs->sscr);
+ while((readl(&port->ip_serial_regs-> sscr)
+ & IOC4_SSCR_PAUSE_STATE) == 0) {
+ spiniter++;
+ if (spiniter > MAXITER) {
+ return -1;
+ }
+ }
+ }
+
+ /* Reset the input fifo. If the uart received chars while the port
+ * was closed and DMA is not enabled, the uart may have a bunch of
+ * chars hanging around in its rx fifo which will not be discarded
+ * by rclr in the upper layer. We must get rid of them here.
+ */
+ writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR,
+ &port->ip_uart_regs->i4u_fcr);
+
+ writeb(UART_LCR_WLEN8, &port->ip_uart_regs->i4u_lcr);
+ /* UART_LCR_STOP == 1 stop */
+
+ /* Re-enable DMA, set default threshold to intr whenever there is
+ * data available.
+ */
+ port->ip_sscr &= ~IOC4_SSCR_RX_THRESHOLD;
+ port->ip_sscr |= 1; /* default threshold */
+
+ /* Plug in the new sscr. This implicitly clears the DMA_PAUSE
+ * flag if it was set above
+ */
+ writel(port->ip_sscr, &port->ip_serial_regs->sscr);
+ port->ip_tx_lowat = 1;
+ return 0;
+}
+
+/**
+ * set_rx_timeout - Set rx timeout and threshold values.
+ * @port: port to use
+ * @timeout: timeout value in ticks
+ */
+static inline int set_rx_timeout(struct ioc4_port *port, int timeout)
+{
+ int threshold;
+
+ port->ip_rx_timeout = timeout;
+
+ /* Timeout is in ticks. Let's figure out how many chars we
+ * can receive at the current baud rate in that interval
+ * and set the rx threshold to that amount. There are 4 chars
+ * per ring entry, so we'll divide the number of chars that will
+ * arrive in timeout by 4.
+ */
+ threshold = timeout * port->ip_baud / 10 / HZ / 4;
+ if (threshold == 0)
+ threshold = 1; /* otherwise we'll intr all the time! */
+
+ if ((unsigned)threshold > (unsigned)IOC4_SSCR_RX_THRESHOLD)
+ return 1;
+
+ port->ip_sscr &= ~IOC4_SSCR_RX_THRESHOLD;
+ port->ip_sscr |= threshold;
+
+ writel(port->ip_sscr, &port->ip_serial_regs->sscr);
+
+ /* Now set the rx timeout to the given value */
+ timeout = timeout * IOC4_SRTR_HZ / HZ;
+ if (timeout > IOC4_SRTR_CNT)
+ timeout = IOC4_SRTR_CNT;
+
+ writel(timeout, &port->ip_serial_regs->srtr);
+ return 0;
+}
+
+/**
+ * config_port - config the hardware
+ * @port: port to config
+ * @baud: baud rate for the port
+ * @byte_size: data size
+ * @stop_bits: number of stop bits
+ * @parenb: parity enable ?
+ * @parodd: odd parity ?
+ */
+static inline int
+config_port(struct ioc4_port *port,
+ int baud, int byte_size, int stop_bits, int parenb, int parodd)
+{
+ char lcr, sizebits;
+ int spiniter = 0;
+
+ DPRINT_CONFIG(("%s: baud %d byte_size %d stop %d parenb %d parodd %d\n",
+ __FUNCTION__, baud, byte_size, stop_bits, parenb, parodd));
+
+ if (set_baud(port, baud))
+ return 1;
+
+ switch (byte_size) {
+ case 5:
+ sizebits = UART_LCR_WLEN5;
+ break;
+ case 6:
+ sizebits = UART_LCR_WLEN6;
+ break;
+ case 7:
+ sizebits = UART_LCR_WLEN7;
+ break;
+ case 8:
+ sizebits = UART_LCR_WLEN8;
+ break;
+ default:
+ return 1;
+ }
+
+ /* Pause the DMA interface if necessary */
+ if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
+ writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE,
+ &port->ip_serial_regs->sscr);
+ while((readl(&port->ip_serial_regs->sscr)
+ & IOC4_SSCR_PAUSE_STATE) == 0) {
+ spiniter++;
+ if (spiniter > MAXITER)
+ return -1;
+ }
+ }
+
+ /* Clear relevant fields in lcr */
+ lcr = readb(&port->ip_uart_regs->i4u_lcr);
+ lcr &= ~(LCR_MASK_BITS_CHAR | UART_LCR_EPAR |
+ UART_LCR_PARITY | LCR_MASK_STOP_BITS);
+
+ /* Set byte size in lcr */
+ lcr |= sizebits;
+
+ /* Set parity */
+ if (parenb) {
+ lcr |= UART_LCR_PARITY;
+ if (!parodd)
+ lcr |= UART_LCR_EPAR;
+ }
+
+ /* Set stop bits */
+ if (stop_bits)
+ lcr |= UART_LCR_STOP /* 2 stop bits */ ;
+
+ writeb(lcr, &port->ip_uart_regs->i4u_lcr);
+
+ /* Re-enable the DMA interface if necessary */
+ if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
+ writel(port->ip_sscr, &port->ip_serial_regs->sscr);
+ }
+ port->ip_baud = baud;
+
+ /* When we get within this number of ring entries of filling the
+ * entire ring on tx, place an EXPLICIT intr to generate a lowat
+ * notification when output has drained.
+ */
+ port->ip_tx_lowat = (TX_LOWAT_CHARS(baud) + 3) / 4;
+ if (port->ip_tx_lowat == 0)
+ port->ip_tx_lowat = 1;
+
+ set_rx_timeout(port, port->ip_rx_timeout);
+
+ return 0;
+}
+
+/**
+ * do_write - Write bytes to the port. Returns the number of bytes
+ * actually written. Called from transmit_chars
+ * @port: port to use
+ * @buf: the stuff to write
+ * @len: how many bytes in 'buf'
+ */
+static inline int do_write(struct ioc4_port *port, char *buf, int len)
+{
+ int prod_ptr, cons_ptr, total = 0;
+ struct ring *outring;
+ struct ring_entry *entry;
+ struct hooks *hooks = port->ip_hooks;
+
+ BUG_ON(!(len >= 0));
+
+ prod_ptr = port->ip_tx_prod;
+ cons_ptr = readl(&port->ip_serial_regs->stcir) & PROD_CONS_MASK;
+ outring = port->ip_outring;
+
+ /* Maintain a 1-entry red-zone. The ring buffer is full when
+ * (cons - prod) % ring_size is 1. Rather than do this subtraction
+ * in the body of the loop, I'll do it now.
+ */
+ cons_ptr = (cons_ptr - (int)sizeof(struct ring_entry)) & PROD_CONS_MASK;
+
+ /* Stuff the bytes into the output */
+ while ((prod_ptr != cons_ptr) && (len > 0)) {
+ int xx;
+
+ /* Get 4 bytes (one ring entry) at a time */
+ entry = (struct ring_entry *)((caddr_t) outring + prod_ptr);
+
+ /* Invalidate all entries */
+ entry->ring_allsc = 0;
+
+ /* Copy in some bytes */
+ for (xx = 0; (xx < 4) && (len > 0); xx++) {
+ entry->ring_data[xx] = *buf++;
+ entry->ring_sc[xx] = IOC4_TXCB_VALID;
+ len--;
+ total++;
+ }
+
+ /* If we are within some small threshold of filling up the
+ * entire ring buffer, we must place an EXPLICIT intr here
+ * to generate a lowat interrupt in case we subsequently
+ * really do fill up the ring and the caller goes to sleep.
+ * No need to place more than one though.
+ */
+ if (!(port->ip_flags & LOWAT_WRITTEN) &&
+ ((cons_ptr - prod_ptr) & PROD_CONS_MASK)
+ <= port->ip_tx_lowat
+ * (int)sizeof(struct ring_entry)) {
+ port->ip_flags |= LOWAT_WRITTEN;
+ entry->ring_sc[0] |= IOC4_TXCB_INT_WHEN_DONE;
+ }
+
+ /* Go on to next entry */
+ prod_ptr += sizeof(struct ring_entry);
+ prod_ptr &= PROD_CONS_MASK;
+ }
+
+ /* If we sent something, start DMA if necessary */
+ if (total > 0 && !(port->ip_sscr & IOC4_SSCR_DMA_EN)) {
+ port->ip_sscr |= IOC4_SSCR_DMA_EN;
+ writel(port->ip_sscr, &port->ip_serial_regs->sscr);
+ }
+
+ /* Store the new producer pointer. If tx is disabled, we stuff the
+ * data into the ring buffer, but we don't actually start tx.
+ */
+ if (!uart_tx_stopped(port->ip_port)) {
+ writel(prod_ptr, &port->ip_serial_regs->stpir);
+
+ /* If we are now transmitting, enable tx_mt interrupt so we
+ * can disable DMA if necessary when the tx finishes.
+ */
+ if (total > 0)
+ enable_intrs(port, hooks->intr_tx_mt);
+ }
+ port->ip_tx_prod = prod_ptr;
+ return total;
+}
+
+/**
+ * disable_intrs - disable interrupts
+ * @port: port to enable
+ * @mask: mask to use
+ */
+static void disable_intrs(struct ioc4_port *port, uint32_t mask)
+{
+ struct hooks *hooks = port->ip_hooks;
+
+ if (port->ip_ienb & mask) {
+ write_ireg(port->ip_ioc4_soft, mask, IOC4_W_IEC,
+ IOC4_SIO_INTR_TYPE);
+ port->ip_ienb &= ~mask;
+ }
+
+ if (!port->ip_ienb)
+ write_ireg(port->ip_ioc4_soft, hooks->intr_dma_error,
+ IOC4_W_IEC, IOC4_OTHER_INTR_TYPE);
+}
+
+/**
+ * set_notification - Modify event notification
+ * @port: port to use
+ * @mask: events mask
+ * @set_on: set ?
+ */
+static int set_notification(struct ioc4_port *port, int mask, int set_on)
+{
+ struct hooks *hooks = port->ip_hooks;
+ uint32_t intrbits, sscrbits;
+
+ BUG_ON(!mask);
+
+ intrbits = sscrbits = 0;
+
+ if (mask & N_DATA_READY)
+ intrbits |= (hooks->intr_rx_timer | hooks->intr_rx_high);
+ if (mask & N_OUTPUT_LOWAT)
+ intrbits |= hooks->intr_tx_explicit;
+ if (mask & N_DDCD) {
+ intrbits |= hooks->intr_delta_dcd;
+ sscrbits |= IOC4_SSCR_RX_RING_DCD;
+ }
+ if (mask & N_DCTS)
+ intrbits |= hooks->intr_delta_cts;
+
+ if (set_on) {
+ enable_intrs(port, intrbits);
+ port->ip_notify |= mask;
+ port->ip_sscr |= sscrbits;
+ } else {
+ disable_intrs(port, intrbits);
+ port->ip_notify &= ~mask;
+ port->ip_sscr &= ~sscrbits;
+ }
+
+ /* We require DMA if either DATA_READY or DDCD notification is
+ * currently requested. If neither of these is requested and
+ * there is currently no tx in progress, DMA may be disabled.
+ */
+ if (port->ip_notify & (N_DATA_READY | N_DDCD))
+ port->ip_sscr |= IOC4_SSCR_DMA_EN;
+ else if (!(port->ip_ienb & hooks->intr_tx_mt))
+ port->ip_sscr &= ~IOC4_SSCR_DMA_EN;
+
+ writel(port->ip_sscr, &port->ip_serial_regs->sscr);
+ return 0;
+}
+
+/**
+ * set_mcr - set the master control reg
+ * @the_port: port to use
+ * @set: set ?
+ * @mask1: mcr mask
+ * @mask2: shadow mask
+ */
+static inline int set_mcr(struct uart_port *the_port, int set,
+ int mask1, int mask2)
+{
+ struct ioc4_port *port = get_ioc4_port(the_port);
+ uint32_t shadow;
+ int spiniter = 0;
+ char mcr;
+
+ if (!port)
+ return -1;
+
+ /* Pause the DMA interface if necessary */
+ if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
+ writel(port->ip_sscr | IOC4_SSCR_DMA_PAUSE,
+ &port->ip_serial_regs->sscr);
+ while ((readl(&port->ip_serial_regs->sscr)
+ & IOC4_SSCR_PAUSE_STATE) == 0) {
+ spiniter++;
+ if (spiniter > MAXITER)
+ return -1;
+ }
+ }
+ shadow = readl(&port->ip_serial_regs->shadow);
+ mcr = (shadow & 0xff000000) >> 24;
+
+ /* Set new value */
+ if (set) {
+ mcr |= mask1;
+ shadow |= mask2;
+ } else {
+ mcr &= ~mask1;
+ shadow &= ~mask2;
+ }
+ writeb(mcr, &port->ip_uart_regs->i4u_mcr);
+ writel(shadow, &port->ip_serial_regs->shadow);
+
+ /* Re-enable the DMA interface if necessary */
+ if (port->ip_sscr & IOC4_SSCR_DMA_EN) {
+ writel(port->ip_sscr, &port->ip_serial_regs->sscr);
+ }
+ return 0;
+}
+
+/**
+ * ioc4_set_proto - set the protocol for the port
+ * @port: port to use
+ * @proto: protocol to use
+ */
+static int ioc4_set_proto(struct ioc4_port *port, enum sio_proto proto)
+{
+ struct hooks *hooks = port->ip_hooks;
+
+ switch (proto) {
+ case PROTO_RS232:
+ /* Clear the appropriate GIO pin */
+ writel(0, (&port->ip_mem->gppr_0 +
+ hooks->rs422_select_pin));
+ break;
+
+ case PROTO_RS422:
+ /* Set the appropriate GIO pin */
+ writel(1, (&port->ip_mem->gppr_0 +
+ hooks->rs422_select_pin));
+ break;
+
+ default:
+ return 1;
+ }
+ return 0;
+}
+
+/**
+ * transmit_chars - upper level write, called with ip_lock
+ * @the_port: port to write
+ */
+static void transmit_chars(struct uart_port *the_port)
+{
+ int xmit_count, tail, head;
+ int result;
+ char *start;
+ struct tty_struct *tty;
+ struct ioc4_port *port = get_ioc4_port(the_port);
+ struct uart_info *info;
+
+ if (!the_port)
+ return;
+ if (!port)
+ return;
+
+ info = the_port->info;
+ tty = info->tty;
+
+ if (uart_circ_empty(&info->xmit) || uart_tx_stopped(the_port)) {
+ /* Nothing to do or hw stopped */
+ set_notification(port, N_ALL_OUTPUT, 0);
+ return;
+ }
+
+ head = info->xmit.head;
+ tail = info->xmit.tail;
+ start = (char *)&info->xmit.buf[tail];
+
+ /* write out all the data or until the end of the buffer */
+ xmit_count = (head < tail) ? (UART_XMIT_SIZE - tail) : (head - tail);
+ if (xmit_count > 0) {
+ result = do_write(port, start, xmit_count);
+ if (result > 0) {
+ /* booking */
+ xmit_count -= result;
+ the_port->icount.tx += result;
+ /* advance the pointers */
+ tail += result;
+ tail &= UART_XMIT_SIZE - 1;
+ info->xmit.tail = tail;
+ start = (char *)&info->xmit.buf[tail];
+ }
+ }
+ if (uart_circ_chars_pending(&info->xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(the_port);
+
+ if (uart_circ_empty(&info->xmit)) {
+ set_notification(port, N_OUTPUT_LOWAT, 0);
+ } else {
+ set_notification(port, N_OUTPUT_LOWAT, 1);
+ }
+}
+
+/**
+ * ioc4_change_speed - change the speed of the port
+ * @the_port: port to change
+ * @new_termios: new termios settings
+ * @old_termios: old termios settings
+ */
+static void
+ioc4_change_speed(struct uart_port *the_port,
+ struct termios *new_termios, struct termios *old_termios)
+{
+ struct ioc4_port *port = get_ioc4_port(the_port);
+ int baud, bits;
+ unsigned cflag, cval;
+ int new_parity = 0, new_parity_enable = 0, new_stop = 1, new_data = 8;
+ struct uart_info *info = the_port->info;
+
+ cflag = new_termios->c_cflag;
+
+ switch (cflag & CSIZE) {
+ case CS5:
+ new_data = 5;
+ cval = 0x00;
+ bits = 7;
+ break;
+ case CS6:
+ new_data = 6;
+ cval = 0x01;
+ bits = 8;
+ break;
+ case CS7:
+ new_data = 7;
+ cval = 0x02;
+ bits = 9;
+ break;
+ case CS8:
+ new_data = 8;
+ cval = 0x03;
+ bits = 10;
+ break;
+ default:
+ /* cuz we always need a default ... */
+ new_data = 5;
+ cval = 0x00;
+ bits = 7;
+ break;
+ }
+ if (cflag & CSTOPB) {
+ cval |= 0x04;
+ bits++;
+ new_stop = 1;
+ }
+ if (cflag & PARENB) {
+ cval |= UART_LCR_PARITY;
+ bits++;
+ new_parity_enable = 1;
+ }
+ if (cflag & PARODD) {
+ cval |= UART_LCR_EPAR;
+ new_parity = 1;
+ }
+ if (cflag & IGNPAR) {
+ cval &= ~UART_LCR_PARITY;
+ new_parity_enable = 0;
+ }
+ baud = uart_get_baud_rate(the_port, new_termios, old_termios,
+ MIN_BAUD_SUPPORTED, MAX_BAUD_SUPPORTED);
+ DPRINT_CONFIG(("%s: returned baud %d\n", __FUNCTION__, baud));
+
+ /* default is 9600 */
+ if (!baud)
+ baud = 9600;
+
+ if (!the_port->fifosize)
+ the_port->fifosize = IOC4_MAX_CHARS;
+ the_port->timeout = ((the_port->fifosize * HZ * bits) / (baud / 10));
+ the_port->timeout += HZ / 50; /* Add .02 seconds of slop */
+
+ the_port->ignore_status_mask = N_ALL_INPUT;
+
+ if (I_IGNPAR(info->tty))
+ the_port->ignore_status_mask &= ~(N_PARITY_ERROR
+ | N_FRAMING_ERROR);
+ if (I_IGNBRK(info->tty)) {
+ the_port->ignore_status_mask &= ~N_BREAK;
+ if (I_IGNPAR(info->tty))
+ the_port->ignore_status_mask &= ~N_OVERRUN_ERROR;
+ }
+ if (!(cflag & CREAD)) {
+ /* ignore everything */
+ the_port->ignore_status_mask &= ~N_DATA_READY;
+ }
+
+ if (cflag & CRTSCTS)
+ info->flags |= ASYNC_CTS_FLOW;
+ else
+ info->flags &= ~ASYNC_CTS_FLOW;
+
+ /* Set the configuration and proper notification call */
+ DPRINT_CONFIG(("%s : port 0x%p cflag 0%o "
+ "config_port(baud %d data %d stop %d p enable %d parity %d),"
+ " notification 0x%x\n",
+ __FUNCTION__, (void *)port, cflag, baud, new_data, new_stop,
+ new_parity_enable, new_parity, the_port->ignore_status_mask));
+
+ if ((config_port(port, baud, /* baud */
+ new_data, /* byte size */
+ new_stop, /* stop bits */
+ new_parity_enable, /* set parity */
+ new_parity)) >= 0) { /* parity 1==odd */
+ set_notification(port, the_port->ignore_status_mask, 1);
+ }
+}
+
+/**
+ * ic4_startup_local - Start up the serial port - returns >= 0 if no errors
+ * @the_port: Port to operate on
+ */
+static inline int ic4_startup_local(struct uart_port *the_port)
+{
+ int retval = 0;
+ struct ioc4_port *port;
+ struct uart_info *info;
+
+ if (!the_port)
+ return -1;
+
+ port = get_ioc4_port(the_port);
+ if (!port)
+ return -1;
+
+ info = the_port->info;
+ if (info->flags & UIF_INITIALIZED) {
+ return retval;
+ }
+
+ if (info->tty) {
+ set_bit(TTY_IO_ERROR, &info->tty->flags);
+ clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+ info->tty->alt_speed = 57600;
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+ info->tty->alt_speed = 115200;
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+ info->tty->alt_speed = 230400;
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+ info->tty->alt_speed = 460800;
+ }
+ local_open(port);
+
+ /* set the speed of the serial port */
+ ioc4_change_speed(the_port, info->tty->termios, (struct termios *)0);
+
+ /* enable hardware flow control - after ioc4_change_speed because
+ * ASYNC_CTS_FLOW is set there */
+ if (info->flags & ASYNC_CTS_FLOW) {
+ port->ip_sscr |= IOC4_SSCR_HFC_EN;
+ writel(port->ip_sscr, &port->ip_serial_regs->sscr);
+ }
+ info->flags |= UIF_INITIALIZED;
+ return 0;
+}
+
+/*
+ * ioc4_cb_output_lowat - called when the output low water mark is hit
+ * @port: port to output
+ */
+static void ioc4_cb_output_lowat(struct ioc4_port *port)
+{
+ /* ip_lock is set on the call here */
+ if (port->ip_port) {
+ transmit_chars(port->ip_port);
+ }
+}
+
+
+/**
+ * handle_intr - service any interrupts for the given port - 2nd level
+ * called via sd_intr
+ * @arg: handler arg
+ * @sio_ir: ioc4regs
+ */
+static void handle_intr(void *arg, uint32_t sio_ir)
+{
+ struct ioc4_port *port = (struct ioc4_port *)arg;
+ struct hooks *hooks = port->ip_hooks;
+ unsigned int rx_high_rd_aborted = 0;
+ unsigned int flags;
+ struct uart_port *the_port;
+ int loop_counter;
+
+ /* Possible race condition here: The tx_mt interrupt bit may be
+ * cleared without the intervention of the interrupt handler,
+ * e.g. by a write. If the top level interrupt handler reads a
+ * tx_mt, then some other processor does a write, starting up
+ * output, then we come in here, see the tx_mt and stop DMA, the
+ * output started by the other processor will hang. Thus we can
+ * only rely on tx_mt being legitimate if it is read while the
+ * port lock is held. Therefore this bit must be ignored in the
+ * passed in interrupt mask which was read by the top level
+ * interrupt handler since the port lock was not held at the time
+ * it was read. We can only rely on this bit being accurate if it
+ * is read while the port lock is held. So we'll clear it for now,
+ * and reload it later once we have the port lock.
+ */
+ sio_ir &= ~(hooks->intr_tx_mt);
+
+ spin_lock_irqsave(&port->ip_lock, flags);
+
+ loop_counter = MAXITER; /* to avoid hangs */
+
+ do {
+ uint32_t shadow;
+
+ if ( loop_counter-- <= 0 ) {
+ printk(KERN_WARNING "IOC4 serial: "
+ "possible hang condition/"
+ "port stuck on interrupt.\n");
+ break;
+ }
+
+ /* Handle a DCD change */
+ if (sio_ir & hooks->intr_delta_dcd) {
+ /* ACK the interrupt */
+ writel(hooks->intr_delta_dcd,
+ &port->ip_mem->sio_ir);
+
+ shadow = readl(&port->ip_serial_regs->shadow);
+
+ if ((port->ip_notify & N_DDCD)
+ && (shadow & IOC4_SHADOW_DCD)
+ && (port->ip_port)) {
+ the_port = port->ip_port;
+ the_port->icount.dcd = 1;
+ wake_up_interruptible
+ (&the_port-> info->delta_msr_wait);
+ } else if ((port->ip_notify & N_DDCD)
+ && !(shadow & IOC4_SHADOW_DCD)) {
+ /* Flag delta DCD/no DCD */
+ port->ip_flags |= DCD_ON;
+ }
+ }
+
+ /* Handle a CTS change */
+ if (sio_ir & hooks->intr_delta_cts) {
+ /* ACK the interrupt */
+ writel(hooks->intr_delta_cts,
+ &port->ip_mem->sio_ir);
+
+ shadow = readl(&port->ip_serial_regs->shadow);
+
+ if ((port->ip_notify & N_DCTS)
+ && (port->ip_port)) {
+ the_port = port->ip_port;
+ the_port->icount.cts =
+ (shadow & IOC4_SHADOW_CTS) ? 1 : 0;
+ wake_up_interruptible
+ (&the_port->info->delta_msr_wait);
+ }
+ }
+
+ /* rx timeout interrupt. Must be some data available. Put this
+ * before the check for rx_high since servicing this condition
+ * may cause that condition to clear.
+ */
+ if (sio_ir & hooks->intr_rx_timer) {
+ /* ACK the interrupt */
+ writel(hooks->intr_rx_timer,
+ &port->ip_mem->sio_ir);
+
+ if ((port->ip_notify & N_DATA_READY)
+ && (port->ip_port)) {
+ /* ip_lock is set on call here */
+ receive_chars(port->ip_port);
+ }
+ }
+
+ /* rx high interrupt. Must be after rx_timer. */
+ else if (sio_ir & hooks->intr_rx_high) {
+ /* Data available, notify upper layer */
+ if ((port->ip_notify & N_DATA_READY)
+ && port->ip_port) {
+ /* ip_lock is set on call here */
+ receive_chars(port->ip_port);
+ }
+
+ /* We can't ACK this interrupt. If receive_chars didn't
+ * cause the condition to clear, we'll have to disable
+ * the interrupt until the data is drained.
+ * If the read was aborted, don't disable the interrupt
+ * as this may cause us to hang indefinitely. An
+ * aborted read generally means that this interrupt
+ * hasn't been delivered to the cpu yet anyway, even
+ * though we see it as asserted when we read the sio_ir.
+ */
+ if ((sio_ir = PENDING(port)) & hooks->intr_rx_high) {
+ if ((port->ip_flags & READ_ABORTED) == 0) {
+ port->ip_ienb &= ~hooks->intr_rx_high;
+ port->ip_flags |= INPUT_HIGH;
+ } else {
+ rx_high_rd_aborted++;
+ }
+ }
+ }
+
+ /* We got a low water interrupt: notify upper layer to
+ * send more data. Must come before tx_mt since servicing
+ * this condition may cause that condition to clear.
+ */
+ if (sio_ir & hooks->intr_tx_explicit) {
+ port->ip_flags &= ~LOWAT_WRITTEN;
+
+ /* ACK the interrupt */
+ writel(hooks->intr_tx_explicit,
+ &port->ip_mem->sio_ir);
+
+ if (port->ip_notify & N_OUTPUT_LOWAT)
+ ioc4_cb_output_lowat(port);
+ }
+
+ /* Handle tx_mt. Must come after tx_explicit. */
+ else if (sio_ir & hooks->intr_tx_mt) {
+ /* If we are expecting a lowat notification
+ * and we get to this point it probably means that for
+ * some reason the tx_explicit didn't work as expected
+ * (that can legitimately happen if the output buffer is
+ * filled up in just the right way).
+ * So send the notification now.
+ */
+ if (port->ip_notify & N_OUTPUT_LOWAT) {
+ ioc4_cb_output_lowat(port);
+
+ /* We need to reload the sio_ir since the lowat
+ * call may have caused another write to occur,
+ * clearing the tx_mt condition.
+ */
+ sio_ir = PENDING(port);
+ }
+
+ /* If the tx_mt condition still persists even after the
+ * lowat call, we've got some work to do.
+ */
+ if (sio_ir & hooks->intr_tx_mt) {
+
+ /* If we are not currently expecting DMA input,
+ * and the transmitter has just gone idle,
+ * there is no longer any reason for DMA, so
+ * disable it.
+ */
+ if (!(port->ip_notify
+ & (N_DATA_READY | N_DDCD))) {
+ BUG_ON(!(port->ip_sscr
+ & IOC4_SSCR_DMA_EN));
+ port->ip_sscr &= ~IOC4_SSCR_DMA_EN;
+ writel(port->ip_sscr,
+ &port->ip_serial_regs->sscr);
+ }
+
+ /* Prevent infinite tx_mt interrupt */
+ port->ip_ienb &= ~hooks->intr_tx_mt;
+ }
+ }
+ sio_ir = PENDING(port);
+
+ /* if the read was aborted and only hooks->intr_rx_high,
+ * clear hooks->intr_rx_high, so we do not loop forever.
+ */
+
+ if (rx_high_rd_aborted && (sio_ir == hooks->intr_rx_high)) {
+ sio_ir &= ~hooks->intr_rx_high;
+ }
+ } while (sio_ir & hooks->intr_all);
+
+ spin_unlock_irqrestore(&port->ip_lock, flags);
+
+ /* Re-enable interrupts before returning from interrupt handler.
+ * Getting interrupted here is okay. It'll just v() our semaphore, and
+ * we'll come through the loop again.
+ */
+
+ write_ireg(port->ip_ioc4_soft, port->ip_ienb, IOC4_W_IES,
+ IOC4_SIO_INTR_TYPE);
+}
+
+/*
+ * ioc4_cb_post_ncs - called for some basic errors
+ * @port: port to use
+ * @ncs: event
+ */
+static void ioc4_cb_post_ncs(struct uart_port *the_port, int ncs)
+{
+ struct uart_icount *icount;
+
+ icount = &the_port->icount;
+
+ if (ncs & NCS_BREAK)
+ icount->brk++;
+ if (ncs & NCS_FRAMING)
+ icount->frame++;
+ if (ncs & NCS_OVERRUN)
+ icount->overrun++;
+ if (ncs & NCS_PARITY)
+ icount->parity++;
+}
+
+/**
+ * do_read - Read in bytes from the port. Return the number of bytes
+ * actually read.
+ * @the_port: port to use
+ * @buf: place to put the stuff we read
+ * @len: how big 'buf' is
+ */
+
+static inline int do_read(struct uart_port *the_port, unsigned char *buf,
+ int len)
+{
+ int prod_ptr, cons_ptr, total;
+ struct ioc4_port *port = get_ioc4_port(the_port);
+ struct ring *inring;
+ struct ring_entry *entry;
+ struct hooks *hooks = port->ip_hooks;
+ int byte_num;
+ char *sc;
+ int loop_counter;
+
+ BUG_ON(!(len >= 0));
+ BUG_ON(!port);
+
+ /* There is a nasty timing issue in the IOC4. When the rx_timer
+ * expires or the rx_high condition arises, we take an interrupt.
+ * At some point while servicing the interrupt, we read bytes from
+ * the ring buffer and re-arm the rx_timer. However the rx_timer is
+ * not started until the first byte is received *after* it is armed,
+ * and any bytes pending in the rx construction buffers are not drained
+ * to memory until either there are 4 bytes available or the rx_timer
+ * expires. This leads to a potential situation where data is left
+ * in the construction buffers forever - 1 to 3 bytes were received
+ * after the interrupt was generated but before the rx_timer was
+ * re-armed. At that point as long as no subsequent bytes are received
+ * the timer will never be started and the bytes will remain in the
+ * construction buffer forever. The solution is to execute a DRAIN
+ * command after rearming the timer. This way any bytes received before
+ * the DRAIN will be drained to memory, and any bytes received after
+ * the DRAIN will start the TIMER and be drained when it expires.
+ * Luckily, this only needs to be done when the DMA buffer is empty
+ * since there is no requirement that this function return all
+ * available data as long as it returns some.
+ */
+ /* Re-arm the timer */
+ writel(port->ip_rx_cons | IOC4_SRCIR_ARM,
+ &port->ip_serial_regs->srcir);
+
+ prod_ptr = readl(&port->ip_serial_regs->srpir) & PROD_CONS_MASK;
+ cons_ptr = port->ip_rx_cons;
+
+ if (prod_ptr == cons_ptr) {
+ int reset_dma = 0;
+
+ /* Input buffer appears empty, do a flush. */
+
+ /* DMA must be enabled for this to work. */
+ if (!(port->ip_sscr & IOC4_SSCR_DMA_EN)) {
+ port->ip_sscr |= IOC4_SSCR_DMA_EN;
+ reset_dma = 1;
+ }
+
+ /* Potential race condition: we must reload the srpir after
+ * issuing the drain command, otherwise we could think the rx
+ * buffer is empty, then take a very long interrupt, and when
+ * we come back it's full and we wait forever for the drain to
+ * complete.
+ */
+ writel(port->ip_sscr | IOC4_SSCR_RX_DRAIN,
+ &port->ip_serial_regs->sscr);
+ prod_ptr = readl(&port->ip_serial_regs->srpir)
+ & PROD_CONS_MASK;
+
+ /* We must not wait for the DRAIN to complete unless there are
+ * at least 8 bytes (2 ring entries) available to receive the
+ * data otherwise the DRAIN will never complete and we'll
+ * deadlock here.
+ * In fact, to make things easier, I'll just ignore the flush if
+ * there is any data at all now available.
+ */
+ if (prod_ptr == cons_ptr) {
+ loop_counter = 0;
+ while (readl(&port->ip_serial_regs->sscr) &
+ IOC4_SSCR_RX_DRAIN) {
+ loop_counter++;
+ if (loop_counter > MAXITER)
+ return -1;
+ }
+
+ /* SIGH. We have to reload the prod_ptr *again* since
+ * the drain may have caused it to change
+ */
+ prod_ptr = readl(&port->ip_serial_regs->srpir)
+ & PROD_CONS_MASK;
+ }
+ if (reset_dma) {
+ port->ip_sscr &= ~IOC4_SSCR_DMA_EN;
+ writel(port->ip_sscr, &port->ip_serial_regs->sscr);
+ }
+ }
+ inring = port->ip_inring;
+ port->ip_flags &= ~READ_ABORTED;
+
+ total = 0;
+ loop_counter = 0xfffff; /* to avoid hangs */
+
+ /* Grab bytes from the hardware */
+ while ((prod_ptr != cons_ptr) && (len > 0)) {
+ entry = (struct ring_entry *)((caddr_t)inring + cons_ptr);
+
+ if ( loop_counter-- <= 0 ) {
+ printk(KERN_WARNING "IOC4 serial: "
+ "possible hang condition/"
+ "port stuck on read.\n");
+ break;
+ }
+
+ /* According to the producer pointer, this ring entry
+ * must contain some data. But if the PIO happened faster
+ * than the DMA, the data may not be available yet, so let's
+ * wait until it arrives.
+ */
+ if ((entry->ring_allsc & RING_ANY_VALID) == 0) {
+ /* Indicate the read is aborted so we don't disable
+ * the interrupt thinking that the consumer is
+ * congested.
+ */
+ port->ip_flags |= READ_ABORTED;
+ len = 0;
+ break;
+ }
+
+ /* Load the bytes/status out of the ring entry */
+ for (byte_num = 0; byte_num < 4 && len > 0; byte_num++) {
+ sc = &(entry->ring_sc[byte_num]);
+
+ /* Check for change in modem state or overrun */
+ if ((*sc & IOC4_RXSB_MODEM_VALID)
+ && (port->ip_notify & N_DDCD)) {
+ /* Notify upper layer if DCD dropped */
+
+ if ((port->ip_flags & DCD_ON)
+ && !(*sc & IOC4_RXSB_DCD)) {
+
+ /* If we have already copied some data,
+ * return it. We'll pick up the carrier
+ * drop on the next pass. That way we
+ * don't throw away the data that has
+ * already been copied back to
+ * the caller's buffer.
+ */
+ if (total > 0) {
+ len = 0;
+ break;
+ }
+ port->ip_flags &= ~DCD_ON;
+
+ /* Turn off this notification so the
+ * carrier drop protocol won't see it
+ * again when it does a read.
+ */
+ *sc &= ~IOC4_RXSB_MODEM_VALID;
+
+ /* To keep things consistent, we need
+ * to update the consumer pointer so
+ * the next reader won't come in and
+ * try to read the same ring entries
+ * again. This must be done here before
+ * the dcd change.
+ */
+
+ if ((entry->ring_allsc & RING_ANY_VALID)
+ == 0) {
+ cons_ptr += (int)sizeof
+ (struct ring_entry);
+ cons_ptr &= PROD_CONS_MASK;
+ }
+ writel(cons_ptr,
+ &port->ip_serial_regs->srcir);
+ port->ip_rx_cons = cons_ptr;
+
+ /* Notify upper layer of carrier drop */
+ if ((port->ip_notify & N_DDCD)
+ && port->ip_port) {
+ the_port->icount.dcd = 0;
+ wake_up_interruptible
+ (&the_port->info->
+ delta_msr_wait);
+ }
+
+ /* If we had any data to return, we
+ * would have returned it above.
+ */
+ return 0;
+ }
+ }
+ if (*sc & IOC4_RXSB_MODEM_VALID) {
+ /* Notify that an input overrun occurred */
+ if ((*sc & IOC4_RXSB_OVERRUN)
+ && (port->ip_notify & N_OVERRUN_ERROR)) {
+ ioc4_cb_post_ncs(the_port, NCS_OVERRUN);
+ }
+ /* Don't look at this byte again */
+ *sc &= ~IOC4_RXSB_MODEM_VALID;
+ }
+
+ /* Check for valid data or RX errors */
+ if ((*sc & IOC4_RXSB_DATA_VALID) &&
+ ((*sc & (IOC4_RXSB_PAR_ERR
+ | IOC4_RXSB_FRAME_ERR
+ | IOC4_RXSB_BREAK))
+ && (port->ip_notify & (N_PARITY_ERROR
+ | N_FRAMING_ERROR
+ | N_BREAK)))) {
+ /* There is an error condition on the next byte.
+ * If we have already transferred some bytes,
+ * we'll stop here. Otherwise if this is the
+ * first byte to be read, we'll just transfer
+ * it alone after notifying the
+ * upper layer of its status.
+ */
+ if (total > 0) {
+ len = 0;
+ break;
+ } else {
+ if ((*sc & IOC4_RXSB_PAR_ERR) &&
+ (port->ip_notify & N_PARITY_ERROR)) {
+ ioc4_cb_post_ncs(the_port,
+ NCS_PARITY);
+ }
+ if ((*sc & IOC4_RXSB_FRAME_ERR) &&
+ (port->ip_notify & N_FRAMING_ERROR)){
+ ioc4_cb_post_ncs(the_port,
+ NCS_FRAMING);
+ }
+ if ((*sc & IOC4_RXSB_BREAK)
+ && (port->ip_notify & N_BREAK)) {
+ ioc4_cb_post_ncs
+ (the_port,
+ NCS_BREAK);
+ }
+ len = 1;
+ }
+ }
+ if (*sc & IOC4_RXSB_DATA_VALID) {
+ *sc &= ~IOC4_RXSB_DATA_VALID;
+ *buf = entry->ring_data[byte_num];
+ buf++;
+ len--;
+ total++;
+ }
+ }
+
+ /* If we used up this entry entirely, go on to the next one,
+ * otherwise we must have run out of buffer space, so
+ * leave the consumer pointer here for the next read in case
+ * there are still unread bytes in this entry.
+ */
+ if ((entry->ring_allsc & RING_ANY_VALID) == 0) {
+ cons_ptr += (int)sizeof(struct ring_entry);
+ cons_ptr &= PROD_CONS_MASK;
+ }
+ }
+
+ /* Update consumer pointer and re-arm rx timer interrupt */
+ writel(cons_ptr, &port->ip_serial_regs->srcir);
+ port->ip_rx_cons = cons_ptr;
+
+ /* If we have now dipped below the rx high water mark and we have
+ * rx_high interrupt turned off, we can now turn it back on again.
+ */
+ if ((port->ip_flags & INPUT_HIGH) && (((prod_ptr - cons_ptr)
+ & PROD_CONS_MASK) < ((port->ip_sscr &
+ IOC4_SSCR_RX_THRESHOLD)
+ << IOC4_PROD_CONS_PTR_OFF))) {
+ port->ip_flags &= ~INPUT_HIGH;
+ enable_intrs(port, hooks->intr_rx_high);
+ }
+ return total;
+}
+/**
+ * receive_chars - upper level read. Called with ip_lock.
+ * @the_port: port to read from
+ */
+static void receive_chars(struct uart_port *the_port)
+{
+ struct tty_struct *tty;
+ unsigned char ch[IOC4_MAX_CHARS];
+ int read_count, request_count;
+ struct uart_icount *icount;
+ struct uart_info *info = the_port->info;
+
+ /* Make sure all the pointers are "good" ones */
+ if (!info)
+ return;
+ if (!info->tty)
+ return;
+
+ tty = info->tty;
+
+ request_count = TTY_FLIPBUF_SIZE - tty->flip.count - 1;
+
+ if (request_count > 0) {
+ if (request_count > IOC4_MAX_CHARS - 2)
+ request_count = IOC4_MAX_CHARS - 2;
+ icount = &the_port->icount;
+ read_count = do_read(the_port, ch, request_count);
+ if (read_count > 0) {
+ memcpy(tty->flip.char_buf_ptr, ch, read_count);
+ memset(tty->flip.flag_buf_ptr, TTY_NORMAL, read_count);
+ tty->flip.char_buf_ptr += read_count;
+ tty->flip.flag_buf_ptr += read_count;
+ tty->flip.count += read_count;
+ icount->rx += read_count;
+ }
+ }
+ tty_flip_buffer_push(tty);
+}
+
+/**
+ * ic4_type - What type of console are we?
+ * @port: Port to operate with (we ignore since we only have one port)
+ *
+ */
+static const char *ic4_type(struct uart_port *the_port)
+{
+ return "SGI IOC4 Serial";
+}
+
+/**
+ * ic4_tx_empty - Is the transmitter empty? We pretend we're always empty
+ * @port: Port to operate on (we ignore since we always return 1)
+ *
+ */
+static unsigned int ic4_tx_empty(struct uart_port *the_port)
+{
+ return 1;
+}
+
+/**
+ * ic4_stop_tx - stop the transmitter
+ * @port: Port to operate on
+ * @tty_stop: Set to 1 if called via uart_stop
+ *
+ */
+static void ic4_stop_tx(struct uart_port *the_port, unsigned int tty_stop)
+{
+}
+
+/**
+ * null_void_function -
+ * @port: Port to operate on
+ *
+ */
+static void null_void_function(struct uart_port *the_port)
+{
+}
+
+/**
+ * ic4_shutdown - shut down the port - free irq and disable
+ * @port: Port to shut down
+ *
+ */
+static void ic4_shutdown(struct uart_port *the_port)
+{
+ unsigned long port_flags;
+ struct ioc4_port *port;
+ struct uart_info *info;
+
+ port = get_ioc4_port(the_port);
+ if (!port)
+ return;
+
+ info = the_port->info;
+
+ if (!(info->flags & UIF_INITIALIZED))
+ return;
+
+ wake_up_interruptible(&info->delta_msr_wait);
+
+ if (info->tty)
+ set_bit(TTY_IO_ERROR, &info->tty->flags);
+
+ spin_lock_irqsave(&port->ip_lock, port_flags);
+ set_notification(port, N_ALL, 0);
+ info->flags &= ~UIF_INITIALIZED;
+ spin_unlock_irqrestore(&port->ip_lock, port_flags);
+}
+
+/**
+ * ic4_set_mctrl - set control lines (dtr, rts, etc)
+ * @port: Port to operate on
+ * @mctrl: Lines to set/unset
+ *
+ */
+static void ic4_set_mctrl(struct uart_port *the_port, unsigned int mctrl)
+{
+ unsigned char mcr = 0;
+
+ if (mctrl & TIOCM_RTS)
+ mcr |= UART_MCR_RTS;
+ if (mctrl & TIOCM_DTR)
+ mcr |= UART_MCR_DTR;
+ if (mctrl & TIOCM_OUT1)
+ mcr |= UART_MCR_OUT1;
+ if (mctrl & TIOCM_OUT2)
+ mcr |= UART_MCR_OUT2;
+ if (mctrl & TIOCM_LOOP)
+ mcr |= UART_MCR_LOOP;
+
+ set_mcr(the_port, 1, mcr, IOC4_SHADOW_DTR);
+}
+
+/**
+ * ic4_get_mctrl - get control line info
+ * @port: port to operate on
+ *
+ */
+static unsigned int ic4_get_mctrl(struct uart_port *the_port)
+{
+ struct ioc4_port *port = get_ioc4_port(the_port);
+ uint32_t shadow;
+ unsigned int ret = 0;
+
+ if (!port)
+ return 0;
+
+ shadow = readl(&port->ip_serial_regs->shadow);
+ if (shadow & IOC4_SHADOW_DCD)
+ ret |= TIOCM_CAR;
+ if (shadow & IOC4_SHADOW_DR)
+ ret |= TIOCM_DSR;
+ if (shadow & IOC4_SHADOW_CTS)
+ ret |= TIOCM_CTS;
+ return ret;
+}
+
+/**
+ * ic4_start_tx - Start transmitter, flush any output
+ * @port: Port to operate on
+ * @tty_stop: Set to 1 if called via uart_start
+ *
+ */
+static void ic4_start_tx(struct uart_port *the_port, unsigned int tty_stop)
+{
+ struct ioc4_port *port = get_ioc4_port(the_port);
+ unsigned long flags;
+
+ if (port) {
+ spin_lock_irqsave(&port->ip_lock, flags);
+ transmit_chars(the_port);
+ spin_unlock_irqrestore(&port->ip_lock, flags);
+ }
+}
+
+/**
+ * ic4_break_ctl - handle breaks
+ * @port: Port to operate on
+ * @break_state: Break state
+ *
+ */
+static void ic4_break_ctl(struct uart_port *the_port, int break_state)
+{
+}
+
+/**
+ * ic4_startup - Start up the serial port - always return 0 (We're always on)
+ * @port: Port to operate on
+ *
+ */
+static int ic4_startup(struct uart_port *the_port)
+{
+ int retval;
+ struct ioc4_port *port;
+ struct ioc4_control *control;
+ struct uart_info *info;
+ unsigned long port_flags;
+
+ if (!the_port) {
+ return -ENODEV;
+ }
+ port = get_ioc4_port(the_port);
+ if (!port) {
+ return -ENODEV;
+ }
+ info = the_port->info;
+
+ control = port->ip_control;
+ if (!control) {
+ return -ENODEV;
+ }
+
+ /* Start up the serial port */
+ spin_lock_irqsave(&port->ip_lock, port_flags);
+ retval = ic4_startup_local(the_port);
+ spin_unlock_irqrestore(&port->ip_lock, port_flags);
+ return retval;
+}
+
+/**
+ * ic4_set_termios - set termios stuff
+ * @port: port to operate on
+ * @termios: New settings
+ * @termios: Old
+ *
+ */
+static void
+ic4_set_termios(struct uart_port *the_port,
+ struct termios *termios, struct termios *old_termios)
+{
+ struct ioc4_port *port = get_ioc4_port(the_port);
+ unsigned long port_flags;
+
+ spin_lock_irqsave(&port->ip_lock, port_flags);
+ ioc4_change_speed(the_port, termios, old_termios);
+ spin_unlock_irqrestore(&port->ip_lock, port_flags);
+}
+
+/**
+ * ic4_request_port - allocate resources for port - no op....
+ * @port: port to operate on
+ *
+ */
+static int ic4_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+/* Associate the uart functions above - given to serial core */
+
+static struct uart_ops ioc4_ops = {
+ .tx_empty = ic4_tx_empty,
+ .set_mctrl = ic4_set_mctrl,
+ .get_mctrl = ic4_get_mctrl,
+ .stop_tx = ic4_stop_tx,
+ .start_tx = ic4_start_tx,
+ .stop_rx = null_void_function,
+ .enable_ms = null_void_function,
+ .break_ctl = ic4_break_ctl,
+ .startup = ic4_startup,
+ .shutdown = ic4_shutdown,
+ .set_termios = ic4_set_termios,
+ .type = ic4_type,
+ .release_port = null_void_function,
+ .request_port = ic4_request_port,
+};
+
+/*
+ * Boot-time initialization code
+ */
+
+static struct uart_driver ioc4_uart = {
+ .owner = THIS_MODULE,
+ .driver_name = "ioc4_serial",
+ .dev_name = DEVICE_NAME,
+ .major = DEVICE_MAJOR,
+ .minor = DEVICE_MINOR,
+ .nr = IOC4_NUM_CARDS * IOC4_NUM_SERIAL_PORTS,
+};
+
+/**
+ * ioc4_serial_core_attach - register with serial core
+ * This is done during pci probing
+ * @pdev: handle for this card
+ */
+static inline int
+ioc4_serial_core_attach(struct pci_dev *pdev)
+{
+ struct ioc4_port *port;
+ struct uart_port *the_port;
+ struct ioc4_control *control = pci_get_drvdata(pdev);
+ int ii;
+
+ DPRINT_CONFIG(("%s: attach pdev 0x%p - control 0x%p\n",
+ __FUNCTION__, pdev, (void *)control));
+
+ if (!control)
+ return -ENODEV;
+
+ /* once around for each port on this card */
+ for (ii = 0; ii < IOC4_NUM_SERIAL_PORTS; ii++) {
+ the_port = &control->ic_port[ii].icp_uart_port;
+ port = control->ic_port[ii].icp_port;
+ port->ip_port = the_port;
+
+ DPRINT_CONFIG(("%s: attach the_port 0x%p / port 0x%p\n",
+ __FUNCTION__, (void *)the_port,
+ (void *)port));
+
+ spin_lock_init(&the_port->lock);
+ /* membase, iobase and mapbase just need to be non-0 */
+ the_port->membase = (unsigned char __iomem *)1;
+ the_port->line = the_port->iobase = ii;
+ the_port->mapbase = 1;
+ the_port->type = PORT_16550A;
+ the_port->fifosize = IOC4_MAX_CHARS;
+ the_port->ops = &ioc4_ops;
+ the_port->irq = control->ic_irq;
+ the_port->dev = &pdev->dev;
+ if (uart_add_one_port(&ioc4_uart, the_port) < 0) {
+ printk(KERN_WARNING
+ "%s: unable to add port %d\n",
+ __FUNCTION__, the_port->line);
+ } else {
+ DPRINT_CONFIG(
+ ("IOC4 serial driver port %d irq = %d\n",
+ the_port->line, the_port->irq));
+ }
+ /* all ports are rs232 for now */
+ ioc4_set_proto(port, PROTO_RS232);
+ }
+ return 0;
+}
+
+/**
+ * ioc4_serial_attach_one - register attach function
+ * called per card found from ioc4_serial_detect as part
+ * of module_init().
+ * @pdev: handle for this card
+ * @pci_id: pci id for this card
+ */
+int
+ioc4_serial_attach_one(struct pci_dev *pdev, const struct pci_device_id *pci_id)
+{
+ struct ioc4_mem __iomem *mem;
+ unsigned long tmp_addr, tmp_addr1;
+ struct ioc4_serial __iomem *serial;
+ struct ioc4_soft *soft;
+ struct ioc4_control *control;
+ int tmp, ret = 0;
+
+
+ DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __FUNCTION__, pdev, pci_id));
+
+ /* Map in the ioc4 memory */
+ tmp_addr = pci_resource_start(pdev, 0);
+ if (!tmp_addr) {
+ printk(KERN_WARNING
+ "ioc4 (%p) : unable to get PIO mapping for "
+ "MEM space\n", (void *)pdev);
+ return -ENODEV;
+ }
+ if (!request_region(tmp_addr, sizeof(struct ioc4_mem), "sioc4_mem")) {
+ printk(KERN_ALERT
+ "ioc4 (%p): unable to get request region for "
+ "MEM space\n", (void *)pdev);
+ return -ENODEV;
+ }
+ mem = ioremap(tmp_addr, sizeof(struct ioc4_mem));
+ if (!mem) {
+ printk(KERN_WARNING
+ "ioc4 (%p) : unable to remap ioc4 memory\n",
+ (void *)pdev);
+ ret = -ENODEV;
+ goto out1;
+ }
+
+ /* request serial registers */
+ tmp_addr1 = pci_resource_start(pdev, 0) + IOC4_SERIAL_OFFSET;
+
+ if (!request_region(tmp_addr1, sizeof(struct ioc4_serial),
+ "sioc4_uart")) {
+ printk(KERN_WARNING
+ "ioc4 (%p): unable to get request region for "
+ "uart space\n", (void *)pdev);
+ ret = -ENODEV;
+ goto out1;
+ }
+ serial = ioremap(tmp_addr1, sizeof(struct ioc4_serial));
+ if (!serial) {
+ printk(KERN_WARNING
+ "ioc4 (%p) : unable to remap ioc4 serial register\n",
+ (void *)pdev);
+ ret = -ENODEV;
+ goto out2;
+ }
+ DPRINT_CONFIG(("%s : mem 0x%p, serial 0x%p\n",
+ __FUNCTION__, (void *)mem, (void *)serial));
+
+ /* Get memory for the new card */
+ control = kmalloc(sizeof(struct ioc4_control) * IOC4_NUM_SERIAL_PORTS,
+ GFP_KERNEL);
+
+ if (!control) {
+ printk(KERN_WARNING "ioc4_attach_one"
+ ": unable to get memory for the IOC4\n");
+ ret = -ENOMEM;
+ goto out2;
+ }
+ memset(control, 0, sizeof(struct ioc4_control));
+ pci_set_drvdata(pdev, control);
+
+ /* Allocate the soft structure */
+ soft = kmalloc(sizeof(struct ioc4_soft), GFP_KERNEL);
+ if (!soft) {
+ printk(KERN_WARNING
+ "ioc4 (%p): unable to get memory for the soft struct\n",
+ (void *)pdev);
+ ret = -ENOMEM;
+ goto out3;
+ }
+ memset(soft, 0, sizeof(struct ioc4_soft));
+
+ spin_lock_init(&soft->is_ir_lock);
+ soft->is_ioc4_mem_addr = mem;
+ soft->is_ioc4_serial_addr = serial;
+
+ /* Init the IOC4 */
+ pci_read_config_dword(pdev, PCI_COMMAND, &tmp);
+ pci_write_config_dword(pdev, PCI_COMMAND,
+ tmp | PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
+
+ writel(0xf << IOC4_SIO_CR_CMD_PULSE_SHIFT, &mem->sio_cr);
+
+ /* Enable serial port mode select generic PIO pins as outputs */
+ writel(IOC4_GPCR_UART0_MODESEL | IOC4_GPCR_UART1_MODESEL
+ | IOC4_GPCR_UART2_MODESEL | IOC4_GPCR_UART3_MODESEL,
+ &mem->gpcr_s);
+
+ /* Clear and disable all interrupts */
+ write_ireg(soft, ~0, IOC4_W_IEC, IOC4_SIO_INTR_TYPE);
+ writel(~0, &mem->sio_ir);
+ write_ireg(soft, ~(IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR),
+ IOC4_W_IEC, IOC4_OTHER_INTR_TYPE);
+ writel(~(IOC4_OTHER_IR_ATA_MEMERR | IOC4_OTHER_IR_ATA_MEMERR),
+ &mem->other_ir);
+ control->ic_soft = soft;
+ if (!request_irq(pdev->irq, ioc4_intr, SA_SHIRQ,
+ "sgi-ioc4serial", (void *)soft)) {
+ control->ic_irq = pdev->irq;
+ } else {
+ printk(KERN_WARNING
+ "%s : request_irq fails for IRQ 0x%x\n ",
+ __FUNCTION__, pdev->irq);
+ }
+ if ((ret = ioc4_attach_local(pdev, control, soft,
+ soft->is_ioc4_mem_addr,
+ soft->is_ioc4_serial_addr)))
+ goto out4;
+
+ /* register port with the serial core */
+
+ if ((ret = ioc4_serial_core_attach(pdev)))
+ goto out4;
+
+ return ret;
+
+ /* error exits that give back resources */
+out4:
+ kfree(soft);
+out3:
+ kfree(control);
+out2:
+ release_region(tmp_addr1, sizeof(struct ioc4_serial));
+out1:
+ release_region(tmp_addr, sizeof(struct ioc4_mem));
+
+ return ret;
+}
+
+
+/**
+ * ioc4_serial_remove_one - detach function
+ *
+ * @pdev: handle for this card
+ */
+
+#if 0
+void ioc4_serial_remove_one(struct pci_dev *pdev)
+{
+ int ii;
+ struct ioc4_control *control;
+ struct uart_port *the_port;
+ struct ioc4_port *port;
+ struct ioc4_soft *soft;
+
+ control = pci_get_drvdata(pdev);
+
+ for (ii = 0; ii < IOC4_NUM_SERIAL_PORTS; ii++) {
+ the_port = &control->ic_port[ii].icp_uart_port;
+ if (the_port) {
+ uart_remove_one_port(&ioc4_uart, the_port);
+ }
+ port = control->ic_port[ii].icp_port;
+ if (!(ii & 1) && port) {
+ pci_free_consistent(port->ip_pdev,
+ TOTAL_RING_BUF_SIZE,
+ (void *)port->ip_cpu_ringbuf,
+ port->ip_dma_ringbuf);
+ kfree(port);
+ }
+ }
+ soft = control->ic_soft;
+ if (soft) {
+ free_irq(control->ic_irq, (void *)soft);
+ if (soft->is_ioc4_serial_addr) {
+ release_region((unsigned long)
+ soft->is_ioc4_serial_addr,
+ sizeof(struct ioc4_serial));
+ }
+ kfree(soft);
+ }
+ kfree(control);
+ pci_set_drvdata(pdev, NULL);
+ uart_unregister_driver(&ioc4_uart);
+}
+#endif
+
+/**
+ * ioc4_serial_init - module init
+ */
+int ioc4_serial_init(void)
+{
+ int ret;
+
+ /* register with serial core */
+ if ((ret = uart_register_driver(&ioc4_uart)) < 0) {
+ printk(KERN_WARNING
+ "%s: Couldn't register IOC4 serial driver\n",
+ __FUNCTION__);
+ return ret;
+ }
+ return 0;
+}
+
+MODULE_AUTHOR("Pat Gefre - Silicon Graphics Inc. (SGI) <pfg@sgi.com>");
+MODULE_DESCRIPTION("Serial PCI driver module for SGI IOC4 Base-IO Card");
+MODULE_LICENSE("GPL");
+
+EXPORT_SYMBOL(ioc4_serial_init);
+EXPORT_SYMBOL(ioc4_serial_attach_one);
diff --git a/drivers/serial/ip22zilog.c b/drivers/serial/ip22zilog.c
new file mode 100644
index 00000000000..3ea46c069f6
--- /dev/null
+++ b/drivers/serial/ip22zilog.c
@@ -0,0 +1,1271 @@
+/*
+ * Driver for Zilog serial chips found on SGI workstations and
+ * servers. This driver could actually be made more generic.
+ *
+ * This is based on the drivers/serial/sunzilog.c code as of 2.6.0-test7 and the
+ * old drivers/sgi/char/sgiserial.c code which itself is based of the original
+ * drivers/sbus/char/zs.c code. A lot of code has been simply moved over
+ * directly from there but much has been rewritten. Credits therefore go out
+ * to David S. Miller, Eddie C. Dost, Pete Zaitcev, Ted Ts'o and Alex Buell
+ * for their work there.
+ *
+ * Copyright (C) 2002 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2002 David S. Miller (davem@redhat.com)
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/circ_buf.h>
+#include <linux/serial.h>
+#include <linux/sysrq.h>
+#include <linux/console.h>
+#include <linux/spinlock.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/sgialib.h>
+#include <asm/sgi/ioc.h>
+#include <asm/sgi/hpc3.h>
+#include <asm/sgi/ip22.h>
+
+#if defined(CONFIG_SERIAL_IP22_ZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/serial_core.h>
+
+#include "ip22zilog.h"
+
+void ip22_do_break(void);
+
+/*
+ * On IP22 we need to delay after register accesses but we do not need to
+ * flush writes.
+ */
+#define ZSDELAY() udelay(5)
+#define ZSDELAY_LONG() udelay(20)
+#define ZS_WSYNC(channel) do { } while (0)
+
+#define NUM_IP22ZILOG 1
+#define NUM_CHANNELS (NUM_IP22ZILOG * 2)
+
+#define ZS_CLOCK 3672000 /* Zilog input clock rate. */
+#define ZS_CLOCK_DIVISOR 16 /* Divisor this driver uses. */
+
+/*
+ * We wrap our port structure around the generic uart_port.
+ */
+struct uart_ip22zilog_port {
+ struct uart_port port;
+
+ /* IRQ servicing chain. */
+ struct uart_ip22zilog_port *next;
+
+ /* Current values of Zilog write registers. */
+ unsigned char curregs[NUM_ZSREGS];
+
+ unsigned int flags;
+#define IP22ZILOG_FLAG_IS_CONS 0x00000004
+#define IP22ZILOG_FLAG_IS_KGDB 0x00000008
+#define IP22ZILOG_FLAG_MODEM_STATUS 0x00000010
+#define IP22ZILOG_FLAG_IS_CHANNEL_A 0x00000020
+#define IP22ZILOG_FLAG_REGS_HELD 0x00000040
+#define IP22ZILOG_FLAG_TX_STOPPED 0x00000080
+#define IP22ZILOG_FLAG_TX_ACTIVE 0x00000100
+
+ unsigned int cflag;
+
+ /* L1-A keyboard break state. */
+ int kbd_id;
+ int l1_down;
+
+ unsigned char parity_mask;
+ unsigned char prev_status;
+};
+
+#define ZILOG_CHANNEL_FROM_PORT(PORT) ((struct zilog_channel *)((PORT)->membase))
+#define UART_ZILOG(PORT) ((struct uart_ip22zilog_port *)(PORT))
+#define IP22ZILOG_GET_CURR_REG(PORT, REGNUM) \
+ (UART_ZILOG(PORT)->curregs[REGNUM])
+#define IP22ZILOG_SET_CURR_REG(PORT, REGNUM, REGVAL) \
+ ((UART_ZILOG(PORT)->curregs[REGNUM]) = (REGVAL))
+#define ZS_IS_CONS(UP) ((UP)->flags & IP22ZILOG_FLAG_IS_CONS)
+#define ZS_IS_KGDB(UP) ((UP)->flags & IP22ZILOG_FLAG_IS_KGDB)
+#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & IP22ZILOG_FLAG_MODEM_STATUS)
+#define ZS_IS_CHANNEL_A(UP) ((UP)->flags & IP22ZILOG_FLAG_IS_CHANNEL_A)
+#define ZS_REGS_HELD(UP) ((UP)->flags & IP22ZILOG_FLAG_REGS_HELD)
+#define ZS_TX_STOPPED(UP) ((UP)->flags & IP22ZILOG_FLAG_TX_STOPPED)
+#define ZS_TX_ACTIVE(UP) ((UP)->flags & IP22ZILOG_FLAG_TX_ACTIVE)
+
+/* Reading and writing Zilog8530 registers. The delays are to make this
+ * driver work on the IP22 which needs a settling delay after each chip
+ * register access, other machines handle this in hardware via auxiliary
+ * flip-flops which implement the settle time we do in software.
+ *
+ * The port lock must be held and local IRQs must be disabled
+ * when {read,write}_zsreg is invoked.
+ */
+static unsigned char read_zsreg(struct zilog_channel *channel,
+ unsigned char reg)
+{
+ unsigned char retval;
+
+ writeb(reg, &channel->control);
+ ZSDELAY();
+ retval = readb(&channel->control);
+ ZSDELAY();
+
+ return retval;
+}
+
+static void write_zsreg(struct zilog_channel *channel,
+ unsigned char reg, unsigned char value)
+{
+ writeb(reg, &channel->control);
+ ZSDELAY();
+ writeb(value, &channel->control);
+ ZSDELAY();
+}
+
+static void ip22zilog_clear_fifo(struct zilog_channel *channel)
+{
+ int i;
+
+ for (i = 0; i < 32; i++) {
+ unsigned char regval;
+
+ regval = readb(&channel->control);
+ ZSDELAY();
+ if (regval & Rx_CH_AV)
+ break;
+
+ regval = read_zsreg(channel, R1);
+ readb(&channel->data);
+ ZSDELAY();
+
+ if (regval & (PAR_ERR | Rx_OVR | CRC_ERR)) {
+ writeb(ERR_RES, &channel->control);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+ }
+ }
+}
+
+/* This function must only be called when the TX is not busy. The UART
+ * port lock must be held and local interrupts disabled.
+ */
+static void __load_zsregs(struct zilog_channel *channel, unsigned char *regs)
+{
+ int i;
+
+ /* Let pending transmits finish. */
+ for (i = 0; i < 1000; i++) {
+ unsigned char stat = read_zsreg(channel, R1);
+ if (stat & ALL_SNT)
+ break;
+ udelay(100);
+ }
+
+ writeb(ERR_RES, &channel->control);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+
+ ip22zilog_clear_fifo(channel);
+
+ /* Disable all interrupts. */
+ write_zsreg(channel, R1,
+ regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB));
+
+ /* Set parity, sync config, stop bits, and clock divisor. */
+ write_zsreg(channel, R4, regs[R4]);
+
+ /* Set misc. TX/RX control bits. */
+ write_zsreg(channel, R10, regs[R10]);
+
+ /* Set TX/RX controls sans the enable bits. */
+ write_zsreg(channel, R3, regs[R3] & ~RxENAB);
+ write_zsreg(channel, R5, regs[R5] & ~TxENAB);
+
+ /* Synchronous mode config. */
+ write_zsreg(channel, R6, regs[R6]);
+ write_zsreg(channel, R7, regs[R7]);
+
+ /* Don't mess with the interrupt vector (R2, unused by us) and
+ * master interrupt control (R9). We make sure this is setup
+ * properly at probe time then never touch it again.
+ */
+
+ /* Disable baud generator. */
+ write_zsreg(channel, R14, regs[R14] & ~BRENAB);
+
+ /* Clock mode control. */
+ write_zsreg(channel, R11, regs[R11]);
+
+ /* Lower and upper byte of baud rate generator divisor. */
+ write_zsreg(channel, R12, regs[R12]);
+ write_zsreg(channel, R13, regs[R13]);
+
+ /* Now rewrite R14, with BRENAB (if set). */
+ write_zsreg(channel, R14, regs[R14]);
+
+ /* External status interrupt control. */
+ write_zsreg(channel, R15, regs[R15]);
+
+ /* Reset external status interrupts. */
+ write_zsreg(channel, R0, RES_EXT_INT);
+ write_zsreg(channel, R0, RES_EXT_INT);
+
+ /* Rewrite R3/R5, this time without enables masked. */
+ write_zsreg(channel, R3, regs[R3]);
+ write_zsreg(channel, R5, regs[R5]);
+
+ /* Rewrite R1, this time without IRQ enabled masked. */
+ write_zsreg(channel, R1, regs[R1]);
+}
+
+/* Reprogram the Zilog channel HW registers with the copies found in the
+ * software state struct. If the transmitter is busy, we defer this update
+ * until the next TX complete interrupt. Else, we do it right now.
+ *
+ * The UART port lock must be held and local interrupts disabled.
+ */
+static void ip22zilog_maybe_update_regs(struct uart_ip22zilog_port *up,
+ struct zilog_channel *channel)
+{
+ if (!ZS_REGS_HELD(up)) {
+ if (ZS_TX_ACTIVE(up)) {
+ up->flags |= IP22ZILOG_FLAG_REGS_HELD;
+ } else {
+ __load_zsregs(channel, up->curregs);
+ }
+ }
+}
+
+static void ip22zilog_receive_chars(struct uart_ip22zilog_port *up,
+ struct zilog_channel *channel,
+ struct pt_regs *regs)
+{
+ struct tty_struct *tty = up->port.info->tty; /* XXX info==NULL? */
+
+ while (1) {
+ unsigned char ch, r1;
+
+ if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
+ tty->flip.work.func((void *)tty);
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+ return; /* XXX Ignores SysRq when we need it most. Fix. */
+ }
+
+ r1 = read_zsreg(channel, R1);
+ if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) {
+ writeb(ERR_RES, &channel->control);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+ }
+
+ ch = readb(&channel->control);
+ ZSDELAY();
+
+ /* This funny hack depends upon BRK_ABRT not interfering
+ * with the other bits we care about in R1.
+ */
+ if (ch & BRK_ABRT)
+ r1 |= BRK_ABRT;
+
+ ch = readb(&channel->data);
+ ZSDELAY();
+
+ ch &= up->parity_mask;
+
+ if (ZS_IS_CONS(up) && (r1 & BRK_ABRT)) {
+ /* Wait for BREAK to deassert to avoid potentially
+ * confusing the PROM.
+ */
+ while (1) {
+ ch = readb(&channel->control);
+ ZSDELAY();
+ if (!(ch & BRK_ABRT))
+ break;
+ }
+ ip22_do_break();
+ return;
+ }
+
+ /* A real serial line, record the character and status. */
+ *tty->flip.char_buf_ptr = ch;
+ *tty->flip.flag_buf_ptr = TTY_NORMAL;
+ up->port.icount.rx++;
+ if (r1 & (BRK_ABRT | PAR_ERR | Rx_OVR | CRC_ERR)) {
+ if (r1 & BRK_ABRT) {
+ r1 &= ~(PAR_ERR | CRC_ERR);
+ up->port.icount.brk++;
+ if (uart_handle_break(&up->port))
+ goto next_char;
+ }
+ else if (r1 & PAR_ERR)
+ up->port.icount.parity++;
+ else if (r1 & CRC_ERR)
+ up->port.icount.frame++;
+ if (r1 & Rx_OVR)
+ up->port.icount.overrun++;
+ r1 &= up->port.read_status_mask;
+ if (r1 & BRK_ABRT)
+ *tty->flip.flag_buf_ptr = TTY_BREAK;
+ else if (r1 & PAR_ERR)
+ *tty->flip.flag_buf_ptr = TTY_PARITY;
+ else if (r1 & CRC_ERR)
+ *tty->flip.flag_buf_ptr = TTY_FRAME;
+ }
+ if (uart_handle_sysrq_char(&up->port, ch, regs))
+ goto next_char;
+
+ if (up->port.ignore_status_mask == 0xff ||
+ (r1 & up->port.ignore_status_mask) == 0) {
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ tty->flip.count++;
+ }
+ if ((r1 & Rx_OVR) &&
+ tty->flip.count < TTY_FLIPBUF_SIZE) {
+ *tty->flip.flag_buf_ptr = TTY_OVERRUN;
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ tty->flip.count++;
+ }
+ next_char:
+ ch = readb(&channel->control);
+ ZSDELAY();
+ if (!(ch & Rx_CH_AV))
+ break;
+ }
+
+ tty_flip_buffer_push(tty);
+}
+
+static void ip22zilog_status_handle(struct uart_ip22zilog_port *up,
+ struct zilog_channel *channel,
+ struct pt_regs *regs)
+{
+ unsigned char status;
+
+ status = readb(&channel->control);
+ ZSDELAY();
+
+ writeb(RES_EXT_INT, &channel->control);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+
+ if (ZS_WANTS_MODEM_STATUS(up)) {
+ if (status & SYNC)
+ up->port.icount.dsr++;
+
+ /* The Zilog just gives us an interrupt when DCD/CTS/etc. change.
+ * But it does not tell us which bit has changed, we have to keep
+ * track of this ourselves.
+ */
+ if ((status & DCD) ^ up->prev_status)
+ uart_handle_dcd_change(&up->port,
+ (status & DCD));
+ if ((status & CTS) ^ up->prev_status)
+ uart_handle_cts_change(&up->port,
+ (status & CTS));
+
+ wake_up_interruptible(&up->port.info->delta_msr_wait);
+ }
+
+ up->prev_status = status;
+}
+
+static void ip22zilog_transmit_chars(struct uart_ip22zilog_port *up,
+ struct zilog_channel *channel)
+{
+ struct circ_buf *xmit;
+
+ if (ZS_IS_CONS(up)) {
+ unsigned char status = readb(&channel->control);
+ ZSDELAY();
+
+ /* TX still busy? Just wait for the next TX done interrupt.
+ *
+ * It can occur because of how we do serial console writes. It would
+ * be nice to transmit console writes just like we normally would for
+ * a TTY line. (ie. buffered and TX interrupt driven). That is not
+ * easy because console writes cannot sleep. One solution might be
+ * to poll on enough port->xmit space becomming free. -DaveM
+ */
+ if (!(status & Tx_BUF_EMP))
+ return;
+ }
+
+ up->flags &= ~IP22ZILOG_FLAG_TX_ACTIVE;
+
+ if (ZS_REGS_HELD(up)) {
+ __load_zsregs(channel, up->curregs);
+ up->flags &= ~IP22ZILOG_FLAG_REGS_HELD;
+ }
+
+ if (ZS_TX_STOPPED(up)) {
+ up->flags &= ~IP22ZILOG_FLAG_TX_STOPPED;
+ goto ack_tx_int;
+ }
+
+ if (up->port.x_char) {
+ up->flags |= IP22ZILOG_FLAG_TX_ACTIVE;
+ writeb(up->port.x_char, &channel->data);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+
+ up->port.icount.tx++;
+ up->port.x_char = 0;
+ return;
+ }
+
+ if (up->port.info == NULL)
+ goto ack_tx_int;
+ xmit = &up->port.info->xmit;
+ if (uart_circ_empty(xmit)) {
+ uart_write_wakeup(&up->port);
+ goto ack_tx_int;
+ }
+ if (uart_tx_stopped(&up->port))
+ goto ack_tx_int;
+
+ up->flags |= IP22ZILOG_FLAG_TX_ACTIVE;
+ writeb(xmit->buf[xmit->tail], &channel->data);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ up->port.icount.tx++;
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+
+ return;
+
+ack_tx_int:
+ writeb(RES_Tx_P, &channel->control);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+}
+
+static irqreturn_t ip22zilog_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct uart_ip22zilog_port *up = dev_id;
+
+ while (up) {
+ struct zilog_channel *channel
+ = ZILOG_CHANNEL_FROM_PORT(&up->port);
+ unsigned char r3;
+
+ spin_lock(&up->port.lock);
+ r3 = read_zsreg(channel, R3);
+
+ /* Channel A */
+ if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
+ writeb(RES_H_IUS, &channel->control);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+
+ if (r3 & CHARxIP)
+ ip22zilog_receive_chars(up, channel, regs);
+ if (r3 & CHAEXT)
+ ip22zilog_status_handle(up, channel, regs);
+ if (r3 & CHATxIP)
+ ip22zilog_transmit_chars(up, channel);
+ }
+ spin_unlock(&up->port.lock);
+
+ /* Channel B */
+ up = up->next;
+ channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
+
+ spin_lock(&up->port.lock);
+ if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
+ writeb(RES_H_IUS, &channel->control);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+
+ if (r3 & CHBRxIP)
+ ip22zilog_receive_chars(up, channel, regs);
+ if (r3 & CHBEXT)
+ ip22zilog_status_handle(up, channel, regs);
+ if (r3 & CHBTxIP)
+ ip22zilog_transmit_chars(up, channel);
+ }
+ spin_unlock(&up->port.lock);
+
+ up = up->next;
+ }
+
+ return IRQ_HANDLED;
+}
+
+/* A convenient way to quickly get R0 status. The caller must _not_ hold the
+ * port lock, it is acquired here.
+ */
+static __inline__ unsigned char ip22zilog_read_channel_status(struct uart_port *port)
+{
+ struct zilog_channel *channel;
+ unsigned long flags;
+ unsigned char status;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ channel = ZILOG_CHANNEL_FROM_PORT(port);
+ status = readb(&channel->control);
+ ZSDELAY();
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return status;
+}
+
+/* The port lock is not held. */
+static unsigned int ip22zilog_tx_empty(struct uart_port *port)
+{
+ unsigned char status;
+ unsigned int ret;
+
+ status = ip22zilog_read_channel_status(port);
+ if (status & Tx_BUF_EMP)
+ ret = TIOCSER_TEMT;
+ else
+ ret = 0;
+
+ return ret;
+}
+
+/* The port lock is not held. */
+static unsigned int ip22zilog_get_mctrl(struct uart_port *port)
+{
+ unsigned char status;
+ unsigned int ret;
+
+ status = ip22zilog_read_channel_status(port);
+
+ ret = 0;
+ if (status & DCD)
+ ret |= TIOCM_CAR;
+ if (status & SYNC)
+ ret |= TIOCM_DSR;
+ if (status & CTS)
+ ret |= TIOCM_CTS;
+
+ return ret;
+}
+
+/* The port lock is held and interrupts are disabled. */
+static void ip22zilog_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port;
+ struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port);
+ unsigned char set_bits, clear_bits;
+
+ set_bits = clear_bits = 0;
+
+ if (mctrl & TIOCM_RTS)
+ set_bits |= RTS;
+ else
+ clear_bits |= RTS;
+ if (mctrl & TIOCM_DTR)
+ set_bits |= DTR;
+ else
+ clear_bits |= DTR;
+
+ /* NOTE: Not subject to 'transmitter active' rule. */
+ up->curregs[R5] |= set_bits;
+ up->curregs[R5] &= ~clear_bits;
+ write_zsreg(channel, R5, up->curregs[R5]);
+}
+
+/* The port lock is held and interrupts are disabled. */
+static void ip22zilog_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port;
+
+ up->flags |= IP22ZILOG_FLAG_TX_STOPPED;
+}
+
+/* The port lock is held and interrupts are disabled. */
+static void ip22zilog_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+ struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port;
+ struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port);
+ unsigned char status;
+
+ up->flags |= IP22ZILOG_FLAG_TX_ACTIVE;
+ up->flags &= ~IP22ZILOG_FLAG_TX_STOPPED;
+
+ status = readb(&channel->control);
+ ZSDELAY();
+
+ /* TX busy? Just wait for the TX done interrupt. */
+ if (!(status & Tx_BUF_EMP))
+ return;
+
+ /* Send the first character to jump-start the TX done
+ * IRQ sending engine.
+ */
+ if (port->x_char) {
+ writeb(port->x_char, &channel->data);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+
+ port->icount.tx++;
+ port->x_char = 0;
+ } else {
+ struct circ_buf *xmit = &port->info->xmit;
+
+ writeb(xmit->buf[xmit->tail], &channel->data);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+ }
+}
+
+/* The port lock is held and interrupts are disabled. */
+static void ip22zilog_stop_rx(struct uart_port *port)
+{
+ struct uart_ip22zilog_port *up = UART_ZILOG(port);
+ struct zilog_channel *channel;
+
+ if (ZS_IS_CONS(up))
+ return;
+
+ channel = ZILOG_CHANNEL_FROM_PORT(port);
+
+ /* Disable all RX interrupts. */
+ up->curregs[R1] &= ~RxINT_MASK;
+ ip22zilog_maybe_update_regs(up, channel);
+}
+
+/* The port lock is held. */
+static void ip22zilog_enable_ms(struct uart_port *port)
+{
+ struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port;
+ struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port);
+ unsigned char new_reg;
+
+ new_reg = up->curregs[R15] | (DCDIE | SYNCIE | CTSIE);
+ if (new_reg != up->curregs[R15]) {
+ up->curregs[R15] = new_reg;
+
+ /* NOTE: Not subject to 'transmitter active' rule. */
+ write_zsreg(channel, R15, up->curregs[R15]);
+ }
+}
+
+/* The port lock is not held. */
+static void ip22zilog_break_ctl(struct uart_port *port, int break_state)
+{
+ struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port;
+ struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port);
+ unsigned char set_bits, clear_bits, new_reg;
+ unsigned long flags;
+
+ set_bits = clear_bits = 0;
+
+ if (break_state)
+ set_bits |= SND_BRK;
+ else
+ clear_bits |= SND_BRK;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ new_reg = (up->curregs[R5] | set_bits) & ~clear_bits;
+ if (new_reg != up->curregs[R5]) {
+ up->curregs[R5] = new_reg;
+
+ /* NOTE: Not subject to 'transmitter active' rule. */
+ write_zsreg(channel, R5, up->curregs[R5]);
+ }
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void __ip22zilog_startup(struct uart_ip22zilog_port *up)
+{
+ struct zilog_channel *channel;
+
+ channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
+ up->prev_status = readb(&channel->control);
+
+ /* Enable receiver and transmitter. */
+ up->curregs[R3] |= RxENAB;
+ up->curregs[R5] |= TxENAB;
+
+ up->curregs[R1] |= EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB;
+ ip22zilog_maybe_update_regs(up, channel);
+}
+
+static int ip22zilog_startup(struct uart_port *port)
+{
+ struct uart_ip22zilog_port *up = UART_ZILOG(port);
+ unsigned long flags;
+
+ if (ZS_IS_CONS(up))
+ return 0;
+
+ spin_lock_irqsave(&port->lock, flags);
+ __ip22zilog_startup(up);
+ spin_unlock_irqrestore(&port->lock, flags);
+ return 0;
+}
+
+/*
+ * The test for ZS_IS_CONS is explained by the following e-mail:
+ *****
+ * From: Russell King <rmk@arm.linux.org.uk>
+ * Date: Sun, 8 Dec 2002 10:18:38 +0000
+ *
+ * On Sun, Dec 08, 2002 at 02:43:36AM -0500, Pete Zaitcev wrote:
+ * > I boot my 2.5 boxes using "console=ttyS0,9600" argument,
+ * > and I noticed that something is not right with reference
+ * > counting in this case. It seems that when the console
+ * > is open by kernel initially, this is not accounted
+ * > as an open, and uart_startup is not called.
+ *
+ * That is correct. We are unable to call uart_startup when the serial
+ * console is initialised because it may need to allocate memory (as
+ * request_irq does) and the memory allocators may not have been
+ * initialised.
+ *
+ * 1. initialise the port into a state where it can send characters in the
+ * console write method.
+ *
+ * 2. don't do the actual hardware shutdown in your shutdown() method (but
+ * do the normal software shutdown - ie, free irqs etc)
+ *****
+ */
+static void ip22zilog_shutdown(struct uart_port *port)
+{
+ struct uart_ip22zilog_port *up = UART_ZILOG(port);
+ struct zilog_channel *channel;
+ unsigned long flags;
+
+ if (ZS_IS_CONS(up))
+ return;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ channel = ZILOG_CHANNEL_FROM_PORT(port);
+
+ /* Disable receiver and transmitter. */
+ up->curregs[R3] &= ~RxENAB;
+ up->curregs[R5] &= ~TxENAB;
+
+ /* Disable all interrupts and BRK assertion. */
+ up->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
+ up->curregs[R5] &= ~SND_BRK;
+ ip22zilog_maybe_update_regs(up, channel);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/* Shared by TTY driver and serial console setup. The port lock is held
+ * and local interrupts are disabled.
+ */
+static void
+ip22zilog_convert_to_zs(struct uart_ip22zilog_port *up, unsigned int cflag,
+ unsigned int iflag, int brg)
+{
+
+ up->curregs[R10] = NRZ;
+ up->curregs[R11] = TCBR | RCBR;
+
+ /* Program BAUD and clock source. */
+ up->curregs[R4] &= ~XCLK_MASK;
+ up->curregs[R4] |= X16CLK;
+ up->curregs[R12] = brg & 0xff;
+ up->curregs[R13] = (brg >> 8) & 0xff;
+ up->curregs[R14] = BRENAB;
+
+ /* Character size, stop bits, and parity. */
+ up->curregs[3] &= ~RxN_MASK;
+ up->curregs[5] &= ~TxN_MASK;
+ switch (cflag & CSIZE) {
+ case CS5:
+ up->curregs[3] |= Rx5;
+ up->curregs[5] |= Tx5;
+ up->parity_mask = 0x1f;
+ break;
+ case CS6:
+ up->curregs[3] |= Rx6;
+ up->curregs[5] |= Tx6;
+ up->parity_mask = 0x3f;
+ break;
+ case CS7:
+ up->curregs[3] |= Rx7;
+ up->curregs[5] |= Tx7;
+ up->parity_mask = 0x7f;
+ break;
+ case CS8:
+ default:
+ up->curregs[3] |= Rx8;
+ up->curregs[5] |= Tx8;
+ up->parity_mask = 0xff;
+ break;
+ };
+ up->curregs[4] &= ~0x0c;
+ if (cflag & CSTOPB)
+ up->curregs[4] |= SB2;
+ else
+ up->curregs[4] |= SB1;
+ if (cflag & PARENB)
+ up->curregs[4] |= PAR_ENAB;
+ else
+ up->curregs[4] &= ~PAR_ENAB;
+ if (!(cflag & PARODD))
+ up->curregs[4] |= PAR_EVEN;
+ else
+ up->curregs[4] &= ~PAR_EVEN;
+
+ up->port.read_status_mask = Rx_OVR;
+ if (iflag & INPCK)
+ up->port.read_status_mask |= CRC_ERR | PAR_ERR;
+ if (iflag & (BRKINT | PARMRK))
+ up->port.read_status_mask |= BRK_ABRT;
+
+ up->port.ignore_status_mask = 0;
+ if (iflag & IGNPAR)
+ up->port.ignore_status_mask |= CRC_ERR | PAR_ERR;
+ if (iflag & IGNBRK) {
+ up->port.ignore_status_mask |= BRK_ABRT;
+ if (iflag & IGNPAR)
+ up->port.ignore_status_mask |= Rx_OVR;
+ }
+
+ if ((cflag & CREAD) == 0)
+ up->port.ignore_status_mask = 0xff;
+}
+
+/* The port lock is not held. */
+static void
+ip22zilog_set_termios(struct uart_port *port, struct termios *termios,
+ struct termios *old)
+{
+ struct uart_ip22zilog_port *up = (struct uart_ip22zilog_port *) port;
+ unsigned long flags;
+ int baud, brg;
+
+ baud = uart_get_baud_rate(port, termios, old, 1200, 76800);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
+
+ ip22zilog_convert_to_zs(up, termios->c_cflag, termios->c_iflag, brg);
+
+ if (UART_ENABLE_MS(&up->port, termios->c_cflag))
+ up->flags |= IP22ZILOG_FLAG_MODEM_STATUS;
+ else
+ up->flags &= ~IP22ZILOG_FLAG_MODEM_STATUS;
+
+ up->cflag = termios->c_cflag;
+
+ ip22zilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(port));
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static const char *ip22zilog_type(struct uart_port *port)
+{
+ return "IP22-Zilog";
+}
+
+/* We do not request/release mappings of the registers here, this
+ * happens at early serial probe time.
+ */
+static void ip22zilog_release_port(struct uart_port *port)
+{
+}
+
+static int ip22zilog_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+/* These do not need to do anything interesting either. */
+static void ip22zilog_config_port(struct uart_port *port, int flags)
+{
+}
+
+/* We do not support letting the user mess with the divisor, IRQ, etc. */
+static int ip22zilog_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ return -EINVAL;
+}
+
+static struct uart_ops ip22zilog_pops = {
+ .tx_empty = ip22zilog_tx_empty,
+ .set_mctrl = ip22zilog_set_mctrl,
+ .get_mctrl = ip22zilog_get_mctrl,
+ .stop_tx = ip22zilog_stop_tx,
+ .start_tx = ip22zilog_start_tx,
+ .stop_rx = ip22zilog_stop_rx,
+ .enable_ms = ip22zilog_enable_ms,
+ .break_ctl = ip22zilog_break_ctl,
+ .startup = ip22zilog_startup,
+ .shutdown = ip22zilog_shutdown,
+ .set_termios = ip22zilog_set_termios,
+ .type = ip22zilog_type,
+ .release_port = ip22zilog_release_port,
+ .request_port = ip22zilog_request_port,
+ .config_port = ip22zilog_config_port,
+ .verify_port = ip22zilog_verify_port,
+};
+
+static struct uart_ip22zilog_port *ip22zilog_port_table;
+static struct zilog_layout **ip22zilog_chip_regs;
+
+static struct uart_ip22zilog_port *ip22zilog_irq_chain;
+static int zilog_irq = -1;
+
+static void * __init alloc_one_table(unsigned long size)
+{
+ void *ret;
+
+ ret = kmalloc(size, GFP_KERNEL);
+ if (ret != NULL)
+ memset(ret, 0, size);
+
+ return ret;
+}
+
+static void __init ip22zilog_alloc_tables(void)
+{
+ ip22zilog_port_table = (struct uart_ip22zilog_port *)
+ alloc_one_table(NUM_CHANNELS * sizeof(struct uart_ip22zilog_port));
+ ip22zilog_chip_regs = (struct zilog_layout **)
+ alloc_one_table(NUM_IP22ZILOG * sizeof(struct zilog_layout *));
+
+ if (ip22zilog_port_table == NULL || ip22zilog_chip_regs == NULL) {
+ panic("IP22-Zilog: Cannot allocate IP22-Zilog tables.");
+ }
+}
+
+/* Get the address of the registers for IP22-Zilog instance CHIP. */
+static struct zilog_layout * __init get_zs(int chip)
+{
+ unsigned long base;
+
+ if (chip < 0 || chip >= NUM_IP22ZILOG) {
+ panic("IP22-Zilog: Illegal chip number %d in get_zs.", chip);
+ }
+
+ /* Not probe-able, hard code it. */
+ base = (unsigned long) &sgioc->uart;
+
+ zilog_irq = SGI_SERIAL_IRQ;
+ request_mem_region(base, 8, "IP22-Zilog");
+
+ return (struct zilog_layout *) base;
+}
+
+#define ZS_PUT_CHAR_MAX_DELAY 2000 /* 10 ms */
+
+#ifdef CONFIG_SERIAL_IP22_ZILOG_CONSOLE
+static void ip22zilog_put_char(struct zilog_channel *channel, unsigned char ch)
+{
+ int loops = ZS_PUT_CHAR_MAX_DELAY;
+
+ /* This is a timed polling loop so do not switch the explicit
+ * udelay with ZSDELAY as that is a NOP on some platforms. -DaveM
+ */
+ do {
+ unsigned char val = readb(&channel->control);
+ if (val & Tx_BUF_EMP) {
+ ZSDELAY();
+ break;
+ }
+ udelay(5);
+ } while (--loops);
+
+ writeb(ch, &channel->data);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+}
+
+static void
+ip22zilog_console_write(struct console *con, const char *s, unsigned int count)
+{
+ struct uart_ip22zilog_port *up = &ip22zilog_port_table[con->index];
+ struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ for (i = 0; i < count; i++, s++) {
+ ip22zilog_put_char(channel, *s);
+ if (*s == 10)
+ ip22zilog_put_char(channel, 13);
+ }
+ udelay(2);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+void
+ip22serial_console_termios(struct console *con, char *options)
+{
+ int baud = 9600, bits = 8, cflag;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ cflag = CREAD | HUPCL | CLOCAL;
+
+ switch (baud) {
+ case 150: cflag |= B150; break;
+ case 300: cflag |= B300; break;
+ case 600: cflag |= B600; break;
+ case 1200: cflag |= B1200; break;
+ case 2400: cflag |= B2400; break;
+ case 4800: cflag |= B4800; break;
+ case 9600: cflag |= B9600; break;
+ case 19200: cflag |= B19200; break;
+ case 38400: cflag |= B38400; break;
+ default: baud = 9600; cflag |= B9600; break;
+ }
+
+ con->cflag = cflag | CS8; /* 8N1 */
+}
+
+static int __init ip22zilog_console_setup(struct console *con, char *options)
+{
+ struct uart_ip22zilog_port *up = &ip22zilog_port_table[con->index];
+ unsigned long flags;
+ int baud, brg;
+
+ printk("Console: ttyS%d (IP22-Zilog)\n", con->index);
+
+ /* Get firmware console settings. */
+ ip22serial_console_termios(con, options);
+
+ /* Firmware console speed is limited to 150-->38400 baud so
+ * this hackish cflag thing is OK.
+ */
+ switch (con->cflag & CBAUD) {
+ case B150: baud = 150; break;
+ case B300: baud = 300; break;
+ case B600: baud = 600; break;
+ case B1200: baud = 1200; break;
+ case B2400: baud = 2400; break;
+ case B4800: baud = 4800; break;
+ default: case B9600: baud = 9600; break;
+ case B19200: baud = 19200; break;
+ case B38400: baud = 38400; break;
+ };
+
+ brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ up->curregs[R15] = BRKIE;
+ ip22zilog_convert_to_zs(up, con->cflag, 0, brg);
+
+ __ip22zilog_startup(up);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return 0;
+}
+
+static struct uart_driver ip22zilog_reg;
+
+static struct console ip22zilog_console = {
+ .name = "ttyS",
+ .write = ip22zilog_console_write,
+ .device = uart_console_device,
+ .setup = ip22zilog_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &ip22zilog_reg,
+};
+#endif /* CONFIG_SERIAL_IP22_ZILOG_CONSOLE */
+
+static struct uart_driver ip22zilog_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "serial",
+ .devfs_name = "tts/",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+ .minor = 64,
+ .nr = NUM_CHANNELS,
+#ifdef CONFIG_SERIAL_IP22_ZILOG_CONSOLE
+ .cons = &ip22zilog_console,
+#endif
+};
+
+static void __init ip22zilog_prepare(void)
+{
+ struct uart_ip22zilog_port *up;
+ struct zilog_layout *rp;
+ int channel, chip;
+
+ /*
+ * Temporary fix.
+ */
+ for (channel = 0; channel < NUM_CHANNELS; channel++)
+ spin_lock_init(&ip22zilog_port_table[channel].port.lock);
+
+ ip22zilog_irq_chain = &ip22zilog_port_table[NUM_CHANNELS - 1];
+ up = &ip22zilog_port_table[0];
+ for (channel = NUM_CHANNELS - 1 ; channel > 0; channel--)
+ up[channel].next = &up[channel - 1];
+ up[channel].next = NULL;
+
+ for (chip = 0; chip < NUM_IP22ZILOG; chip++) {
+ if (!ip22zilog_chip_regs[chip]) {
+ ip22zilog_chip_regs[chip] = rp = get_zs(chip);
+
+ up[(chip * 2) + 0].port.membase = (char *) &rp->channelB;
+ up[(chip * 2) + 1].port.membase = (char *) &rp->channelA;
+
+ /* In theory mapbase is the physical address ... */
+ up[(chip * 2) + 0].port.mapbase =
+ (unsigned long) ioremap((unsigned long) &rp->channelB, 8);
+ up[(chip * 2) + 1].port.mapbase =
+ (unsigned long) ioremap((unsigned long) &rp->channelA, 8);
+ }
+
+ /* Channel A */
+ up[(chip * 2) + 0].port.iotype = UPIO_MEM;
+ up[(chip * 2) + 0].port.irq = zilog_irq;
+ up[(chip * 2) + 0].port.uartclk = ZS_CLOCK;
+ up[(chip * 2) + 0].port.fifosize = 1;
+ up[(chip * 2) + 0].port.ops = &ip22zilog_pops;
+ up[(chip * 2) + 0].port.type = PORT_IP22ZILOG;
+ up[(chip * 2) + 0].port.flags = 0;
+ up[(chip * 2) + 0].port.line = (chip * 2) + 0;
+ up[(chip * 2) + 0].flags = 0;
+
+ /* Channel B */
+ up[(chip * 2) + 1].port.iotype = UPIO_MEM;
+ up[(chip * 2) + 1].port.irq = zilog_irq;
+ up[(chip * 2) + 1].port.uartclk = ZS_CLOCK;
+ up[(chip * 2) + 1].port.fifosize = 1;
+ up[(chip * 2) + 1].port.ops = &ip22zilog_pops;
+ up[(chip * 2) + 1].port.type = PORT_IP22ZILOG;
+ up[(chip * 2) + 1].port.flags |= IP22ZILOG_FLAG_IS_CHANNEL_A;
+ up[(chip * 2) + 1].port.line = (chip * 2) + 1;
+ up[(chip * 2) + 1].flags = 0;
+ }
+}
+
+static void __init ip22zilog_init_hw(void)
+{
+ int i;
+
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ struct uart_ip22zilog_port *up = &ip22zilog_port_table[i];
+ struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
+ unsigned long flags;
+ int baud, brg;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ if (ZS_IS_CHANNEL_A(up)) {
+ write_zsreg(channel, R9, FHWRES);
+ ZSDELAY_LONG();
+ (void) read_zsreg(channel, R0);
+ }
+
+ /* Normal serial TTY. */
+ up->parity_mask = 0xff;
+ up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB;
+ up->curregs[R4] = PAR_EVEN | X16CLK | SB1;
+ up->curregs[R3] = RxENAB | Rx8;
+ up->curregs[R5] = TxENAB | Tx8;
+ up->curregs[R9] = NV | MIE;
+ up->curregs[R10] = NRZ;
+ up->curregs[R11] = TCBR | RCBR;
+ baud = 9600;
+ brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
+ up->curregs[R12] = (brg & 0xff);
+ up->curregs[R13] = (brg >> 8) & 0xff;
+ up->curregs[R14] = BRENAB;
+ __load_zsregs(channel, up->curregs);
+ /* set master interrupt enable */
+ write_zsreg(channel, R9, up->curregs[R9]);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+ }
+}
+
+static int __init ip22zilog_ports_init(void)
+{
+ int ret;
+
+ printk(KERN_INFO "Serial: IP22 Zilog driver (%d chips).\n", NUM_IP22ZILOG);
+
+ ip22zilog_prepare();
+
+ if (request_irq(zilog_irq, ip22zilog_interrupt, 0,
+ "IP22-Zilog", ip22zilog_irq_chain)) {
+ panic("IP22-Zilog: Unable to register zs interrupt handler.\n");
+ }
+
+ ip22zilog_init_hw();
+
+ ret = uart_register_driver(&ip22zilog_reg);
+ if (ret == 0) {
+ int i;
+
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ struct uart_ip22zilog_port *up = &ip22zilog_port_table[i];
+
+ uart_add_one_port(&ip22zilog_reg, &up->port);
+ }
+ }
+
+ return ret;
+}
+
+static int __init ip22zilog_init(void)
+{
+ /* IP22 Zilog setup is hard coded, no probing to do. */
+ ip22zilog_alloc_tables();
+ ip22zilog_ports_init();
+
+ return 0;
+}
+
+static void __exit ip22zilog_exit(void)
+{
+ int i;
+
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ struct uart_ip22zilog_port *up = &ip22zilog_port_table[i];
+
+ uart_remove_one_port(&ip22zilog_reg, &up->port);
+ }
+
+ uart_unregister_driver(&ip22zilog_reg);
+}
+
+module_init(ip22zilog_init);
+module_exit(ip22zilog_exit);
+
+/* David wrote it but I'm to blame for the bugs ... */
+MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
+MODULE_DESCRIPTION("SGI Zilog serial port driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/ip22zilog.h b/drivers/serial/ip22zilog.h
new file mode 100644
index 00000000000..a59a9a8341d
--- /dev/null
+++ b/drivers/serial/ip22zilog.h
@@ -0,0 +1,281 @@
+#ifndef _IP22_ZILOG_H
+#define _IP22_ZILOG_H
+
+#include <asm/byteorder.h>
+
+struct zilog_channel {
+#ifdef __BIG_ENDIAN
+ volatile unsigned char unused0[3];
+ volatile unsigned char control;
+ volatile unsigned char unused1[3];
+ volatile unsigned char data;
+#else /* __LITTLE_ENDIAN */
+ volatile unsigned char control;
+ volatile unsigned char unused0[3];
+ volatile unsigned char data;
+ volatile unsigned char unused1[3];
+#endif
+};
+
+struct zilog_layout {
+ struct zilog_channel channelB;
+ struct zilog_channel channelA;
+};
+
+#define NUM_ZSREGS 16
+
+/* Conversion routines to/from brg time constants from/to bits
+ * per second.
+ */
+#define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2))
+#define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2)
+
+/* The Zilog register set */
+
+#define FLAG 0x7e
+
+/* Write Register 0 */
+#define R0 0 /* Register selects */
+#define R1 1
+#define R2 2
+#define R3 3
+#define R4 4
+#define R5 5
+#define R6 6
+#define R7 7
+#define R8 8
+#define R9 9
+#define R10 10
+#define R11 11
+#define R12 12
+#define R13 13
+#define R14 14
+#define R15 15
+
+#define NULLCODE 0 /* Null Code */
+#define POINT_HIGH 0x8 /* Select upper half of registers */
+#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */
+#define SEND_ABORT 0x18 /* HDLC Abort */
+#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */
+#define RES_Tx_P 0x28 /* Reset TxINT Pending */
+#define ERR_RES 0x30 /* Error Reset */
+#define RES_H_IUS 0x38 /* Reset highest IUS */
+
+#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */
+#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */
+#define RES_EOM_L 0xC0 /* Reset EOM latch */
+
+/* Write Register 1 */
+
+#define EXT_INT_ENAB 0x1 /* Ext Int Enable */
+#define TxINT_ENAB 0x2 /* Tx Int Enable */
+#define PAR_SPEC 0x4 /* Parity is special condition */
+
+#define RxINT_DISAB 0 /* Rx Int Disable */
+#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */
+#define INT_ALL_Rx 0x10 /* Int on all Rx Characters or error */
+#define INT_ERR_Rx 0x18 /* Int on error only */
+#define RxINT_MASK 0x18
+
+#define WT_RDY_RT 0x20 /* Wait/Ready on R/T */
+#define WT_FN_RDYFN 0x40 /* Wait/FN/Ready FN */
+#define WT_RDY_ENAB 0x80 /* Wait/Ready Enable */
+
+/* Write Register #2 (Interrupt Vector) */
+
+/* Write Register 3 */
+
+#define RxENAB 0x1 /* Rx Enable */
+#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */
+#define ADD_SM 0x4 /* Address Search Mode (SDLC) */
+#define RxCRC_ENAB 0x8 /* Rx CRC Enable */
+#define ENT_HM 0x10 /* Enter Hunt Mode */
+#define AUTO_ENAB 0x20 /* Auto Enables */
+#define Rx5 0x0 /* Rx 5 Bits/Character */
+#define Rx7 0x40 /* Rx 7 Bits/Character */
+#define Rx6 0x80 /* Rx 6 Bits/Character */
+#define Rx8 0xc0 /* Rx 8 Bits/Character */
+#define RxN_MASK 0xc0
+
+/* Write Register 4 */
+
+#define PAR_ENAB 0x1 /* Parity Enable */
+#define PAR_EVEN 0x2 /* Parity Even/Odd* */
+
+#define SYNC_ENAB 0 /* Sync Modes Enable */
+#define SB1 0x4 /* 1 stop bit/char */
+#define SB15 0x8 /* 1.5 stop bits/char */
+#define SB2 0xc /* 2 stop bits/char */
+
+#define MONSYNC 0 /* 8 Bit Sync character */
+#define BISYNC 0x10 /* 16 bit sync character */
+#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */
+#define EXTSYNC 0x30 /* External Sync Mode */
+
+#define X1CLK 0x0 /* x1 clock mode */
+#define X16CLK 0x40 /* x16 clock mode */
+#define X32CLK 0x80 /* x32 clock mode */
+#define X64CLK 0xC0 /* x64 clock mode */
+#define XCLK_MASK 0xC0
+
+/* Write Register 5 */
+
+#define TxCRC_ENAB 0x1 /* Tx CRC Enable */
+#define RTS 0x2 /* RTS */
+#define SDLC_CRC 0x4 /* SDLC/CRC-16 */
+#define TxENAB 0x8 /* Tx Enable */
+#define SND_BRK 0x10 /* Send Break */
+#define Tx5 0x0 /* Tx 5 bits (or less)/character */
+#define Tx7 0x20 /* Tx 7 bits/character */
+#define Tx6 0x40 /* Tx 6 bits/character */
+#define Tx8 0x60 /* Tx 8 bits/character */
+#define TxN_MASK 0x60
+#define DTR 0x80 /* DTR */
+
+/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */
+
+/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */
+
+/* Write Register 8 (transmit buffer) */
+
+/* Write Register 9 (Master interrupt control) */
+#define VIS 1 /* Vector Includes Status */
+#define NV 2 /* No Vector */
+#define DLC 4 /* Disable Lower Chain */
+#define MIE 8 /* Master Interrupt Enable */
+#define STATHI 0x10 /* Status high */
+#define NORESET 0 /* No reset on write to R9 */
+#define CHRB 0x40 /* Reset channel B */
+#define CHRA 0x80 /* Reset channel A */
+#define FHWRES 0xc0 /* Force hardware reset */
+
+/* Write Register 10 (misc control bits) */
+#define BIT6 1 /* 6 bit/8bit sync */
+#define LOOPMODE 2 /* SDLC Loop mode */
+#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */
+#define MARKIDLE 8 /* Mark/flag on idle */
+#define GAOP 0x10 /* Go active on poll */
+#define NRZ 0 /* NRZ mode */
+#define NRZI 0x20 /* NRZI mode */
+#define FM1 0x40 /* FM1 (transition = 1) */
+#define FM0 0x60 /* FM0 (transition = 0) */
+#define CRCPS 0x80 /* CRC Preset I/O */
+
+/* Write Register 11 (Clock Mode control) */
+#define TRxCXT 0 /* TRxC = Xtal output */
+#define TRxCTC 1 /* TRxC = Transmit clock */
+#define TRxCBR 2 /* TRxC = BR Generator Output */
+#define TRxCDP 3 /* TRxC = DPLL output */
+#define TRxCOI 4 /* TRxC O/I */
+#define TCRTxCP 0 /* Transmit clock = RTxC pin */
+#define TCTRxCP 8 /* Transmit clock = TRxC pin */
+#define TCBR 0x10 /* Transmit clock = BR Generator output */
+#define TCDPLL 0x18 /* Transmit clock = DPLL output */
+#define RCRTxCP 0 /* Receive clock = RTxC pin */
+#define RCTRxCP 0x20 /* Receive clock = TRxC pin */
+#define RCBR 0x40 /* Receive clock = BR Generator output */
+#define RCDPLL 0x60 /* Receive clock = DPLL output */
+#define RTxCX 0x80 /* RTxC Xtal/No Xtal */
+
+/* Write Register 12 (lower byte of baud rate generator time constant) */
+
+/* Write Register 13 (upper byte of baud rate generator time constant) */
+
+/* Write Register 14 (Misc control bits) */
+#define BRENAB 1 /* Baud rate generator enable */
+#define BRSRC 2 /* Baud rate generator source */
+#define DTRREQ 4 /* DTR/Request function */
+#define AUTOECHO 8 /* Auto Echo */
+#define LOOPBAK 0x10 /* Local loopback */
+#define SEARCH 0x20 /* Enter search mode */
+#define RMC 0x40 /* Reset missing clock */
+#define DISDPLL 0x60 /* Disable DPLL */
+#define SSBR 0x80 /* Set DPLL source = BR generator */
+#define SSRTxC 0xa0 /* Set DPLL source = RTxC */
+#define SFMM 0xc0 /* Set FM mode */
+#define SNRZI 0xe0 /* Set NRZI mode */
+
+/* Write Register 15 (external/status interrupt control) */
+#define ZCIE 2 /* Zero count IE */
+#define DCDIE 8 /* DCD IE */
+#define SYNCIE 0x10 /* Sync/hunt IE */
+#define CTSIE 0x20 /* CTS IE */
+#define TxUIE 0x40 /* Tx Underrun/EOM IE */
+#define BRKIE 0x80 /* Break/Abort IE */
+
+
+/* Read Register 0 */
+#define Rx_CH_AV 0x1 /* Rx Character Available */
+#define ZCOUNT 0x2 /* Zero count */
+#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */
+#define DCD 0x8 /* DCD */
+#define SYNC 0x10 /* Sync/hunt */
+#define CTS 0x20 /* CTS */
+#define TxEOM 0x40 /* Tx underrun */
+#define BRK_ABRT 0x80 /* Break/Abort */
+
+/* Read Register 1 */
+#define ALL_SNT 0x1 /* All sent */
+/* Residue Data for 8 Rx bits/char programmed */
+#define RES3 0x8 /* 0/3 */
+#define RES4 0x4 /* 0/4 */
+#define RES5 0xc /* 0/5 */
+#define RES6 0x2 /* 0/6 */
+#define RES7 0xa /* 0/7 */
+#define RES8 0x6 /* 0/8 */
+#define RES18 0xe /* 1/8 */
+#define RES28 0x0 /* 2/8 */
+/* Special Rx Condition Interrupts */
+#define PAR_ERR 0x10 /* Parity error */
+#define Rx_OVR 0x20 /* Rx Overrun Error */
+#define CRC_ERR 0x40 /* CRC/Framing Error */
+#define END_FR 0x80 /* End of Frame (SDLC) */
+
+/* Read Register 2 (channel b only) - Interrupt vector */
+#define CHB_Tx_EMPTY 0x00
+#define CHB_EXT_STAT 0x02
+#define CHB_Rx_AVAIL 0x04
+#define CHB_SPECIAL 0x06
+#define CHA_Tx_EMPTY 0x08
+#define CHA_EXT_STAT 0x0a
+#define CHA_Rx_AVAIL 0x0c
+#define CHA_SPECIAL 0x0e
+#define STATUS_MASK 0x0e
+
+/* Read Register 3 (interrupt pending register) ch a only */
+#define CHBEXT 0x1 /* Channel B Ext/Stat IP */
+#define CHBTxIP 0x2 /* Channel B Tx IP */
+#define CHBRxIP 0x4 /* Channel B Rx IP */
+#define CHAEXT 0x8 /* Channel A Ext/Stat IP */
+#define CHATxIP 0x10 /* Channel A Tx IP */
+#define CHARxIP 0x20 /* Channel A Rx IP */
+
+/* Read Register 8 (receive data register) */
+
+/* Read Register 10 (misc status bits) */
+#define ONLOOP 2 /* On loop */
+#define LOOPSEND 0x10 /* Loop sending */
+#define CLK2MIS 0x40 /* Two clocks missing */
+#define CLK1MIS 0x80 /* One clock missing */
+
+/* Read Register 12 (lower byte of baud rate generator constant) */
+
+/* Read Register 13 (upper byte of baud rate generator constant) */
+
+/* Read Register 15 (value of WR 15) */
+
+/* Misc macros */
+#define ZS_CLEARERR(channel) do { writeb(ERR_RES, &channel->control); \
+ udelay(5); } while(0)
+
+#define ZS_CLEARSTAT(channel) do { writeb(RES_EXT_INT, &channel->control); \
+ udelay(5); } while(0)
+
+#define ZS_CLEARFIFO(channel) do { readb(&channel->data); \
+ udelay(2); \
+ readb(&channel->data); \
+ udelay(2); \
+ readb(&channel->data); \
+ udelay(2); } while(0)
+
+#endif /* _IP22_ZILOG_H */
diff --git a/drivers/serial/jsm/Makefile b/drivers/serial/jsm/Makefile
new file mode 100644
index 00000000000..e46b6e0f8b1
--- /dev/null
+++ b/drivers/serial/jsm/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for Jasmine adapter
+#
+
+obj-$(CONFIG_SERIAL_JSM) += jsm.o
+
+jsm-objs := jsm_driver.o jsm_neo.o jsm_tty.o
+
diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h
new file mode 100644
index 00000000000..b12ee02a0f7
--- /dev/null
+++ b/drivers/serial/jsm/jsm.h
@@ -0,0 +1,437 @@
+/************************************************************************
+ * Copyright 2003 Digi International (www.digi.com)
+ *
+ * Copyright (C) 2004 IBM Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the
+ * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ * PURPOSE. See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 * Temple Place - Suite 330, Boston,
+ * MA 02111-1307, USA.
+ *
+ * Contact Information:
+ * Scott H Kilau <Scott_Kilau@digi.com>
+ * Wendy Xiong <wendyx@us.ltcfwd.linux.ibm.com>
+ *
+ ***********************************************************************/
+
+#ifndef __JSM_DRIVER_H
+#define __JSM_DRIVER_H
+
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/types.h> /* To pick up the varions Linux types */
+#include <linux/tty.h>
+#include <linux/serial_core.h>
+#include <linux/device.h>
+
+/*
+ * Debugging levels can be set using debug insmod variable
+ * They can also be compiled out completely.
+ */
+enum {
+ DBG_INIT = 0x01,
+ DBG_BASIC = 0x02,
+ DBG_CORE = 0x04,
+ DBG_OPEN = 0x08,
+ DBG_CLOSE = 0x10,
+ DBG_READ = 0x20,
+ DBG_WRITE = 0x40,
+ DBG_IOCTL = 0x80,
+ DBG_PROC = 0x100,
+ DBG_PARAM = 0x200,
+ DBG_PSCAN = 0x400,
+ DBG_EVENT = 0x800,
+ DBG_DRAIN = 0x1000,
+ DBG_MSIGS = 0x2000,
+ DBG_MGMT = 0x4000,
+ DBG_INTR = 0x8000,
+ DBG_CARR = 0x10000,
+};
+
+#define jsm_printk(nlevel, klevel, pdev, fmt, args...) \
+ if ((DBG_##nlevel & jsm_debug)) \
+ dev_printk(KERN_##klevel, pdev->dev, fmt, ## args)
+
+#define MAXPORTS 8
+#define MAX_STOPS_SENT 5
+
+/* Board type definitions */
+
+#define T_NEO 0000
+#define T_CLASSIC 0001
+#define T_PCIBUS 0400
+
+/* Board State Definitions */
+
+#define BD_RUNNING 0x0
+#define BD_REASON 0x7f
+#define BD_NOTFOUND 0x1
+#define BD_NOIOPORT 0x2
+#define BD_NOMEM 0x3
+#define BD_NOBIOS 0x4
+#define BD_NOFEP 0x5
+#define BD_FAILED 0x6
+#define BD_ALLOCATED 0x7
+#define BD_TRIBOOT 0x8
+#define BD_BADKME 0x80
+
+
+/* 4 extra for alignment play space */
+#define WRITEBUFLEN ((4096) + 4)
+#define MYFLIPLEN N_TTY_BUF_SIZE
+
+#define JSM_VERSION "jsm: 1.1-1-INKERNEL"
+#define JSM_PARTNUM "40002438_A-INKERNEL"
+
+/*
+ * All the possible states the driver can be while being loaded.
+ */
+enum {
+ DRIVER_INITIALIZED = 0,
+ DRIVER_READY
+};
+
+/*
+ * All the possible states the board can be while booting up.
+ */
+enum {
+ BOARD_FAILED = 0,
+ BOARD_FOUND,
+ BOARD_READY
+};
+
+struct board_id {
+ u8 *name;
+ u32 maxports;
+};
+
+struct jsm_board;
+struct jsm_channel;
+
+/************************************************************************
+ * Per board operations structure *
+ ************************************************************************/
+struct board_ops {
+ irqreturn_t (*intr) (int irq, void *voidbrd, struct pt_regs *regs);
+ void (*uart_init) (struct jsm_channel *ch);
+ void (*uart_off) (struct jsm_channel *ch);
+ void (*param) (struct jsm_channel *ch);
+ void (*assert_modem_signals) (struct jsm_channel *ch);
+ void (*flush_uart_write) (struct jsm_channel *ch);
+ void (*flush_uart_read) (struct jsm_channel *ch);
+ void (*disable_receiver) (struct jsm_channel *ch);
+ void (*enable_receiver) (struct jsm_channel *ch);
+ void (*send_break) (struct jsm_channel *ch);
+ void (*clear_break) (struct jsm_channel *ch, int);
+ void (*send_start_character) (struct jsm_channel *ch);
+ void (*send_stop_character) (struct jsm_channel *ch);
+ void (*copy_data_from_queue_to_uart) (struct jsm_channel *ch);
+ u32 (*get_uart_bytes_left) (struct jsm_channel *ch);
+ void (*send_immediate_char) (struct jsm_channel *ch, unsigned char);
+};
+
+
+/*
+ * Per-board information
+ */
+struct jsm_board
+{
+ int boardnum; /* Board number: 0-32 */
+
+ int type; /* Type of board */
+ char *name; /* Product Name */
+ u8 rev; /* PCI revision ID */
+ struct pci_dev *pci_dev;
+ u32 maxports; /* MAX ports this board can handle */
+
+ spinlock_t bd_lock; /* Used to protect board */
+
+ spinlock_t bd_intr_lock; /* Used to protect the poller tasklet and
+ * the interrupt routine from each other.
+ */
+
+ u32 state; /* State of card. */
+ wait_queue_head_t state_wait; /* Place to sleep on for state change */
+
+ u32 nasync; /* Number of ports on card */
+
+ u32 irq; /* Interrupt request number */
+ u64 intr_count; /* Count of interrupts */
+
+ u64 membase; /* Start of base memory of the card */
+ u64 membase_end; /* End of base memory of the card */
+
+ u8 __iomem *re_map_membase;/* Remapped memory of the card */
+
+ u64 iobase; /* Start of io base of the card */
+ u64 iobase_end; /* End of io base of the card */
+
+ u32 bd_uart_offset; /* Space between each UART */
+
+ struct jsm_channel *channels[MAXPORTS]; /* array of pointers to our channels. */
+ char *flipbuf; /* Our flip buffer, alloced if board is found */
+
+ u16 dpatype; /* The board "type", as defined by DPA */
+ u16 dpastatus; /* The board "status", as defined by DPA */
+
+ u32 bd_dividend; /* Board/UARTs specific dividend */
+
+ struct board_ops *bd_ops;
+
+ struct list_head jsm_board_entry;
+};
+
+/************************************************************************
+ * Device flag definitions for ch_flags.
+ ************************************************************************/
+#define CH_PRON 0x0001 /* Printer on string */
+#define CH_STOP 0x0002 /* Output is stopped */
+#define CH_STOPI 0x0004 /* Input is stopped */
+#define CH_CD 0x0008 /* Carrier is present */
+#define CH_FCAR 0x0010 /* Carrier forced on */
+#define CH_HANGUP 0x0020 /* Hangup received */
+
+#define CH_RECEIVER_OFF 0x0040 /* Receiver is off */
+#define CH_OPENING 0x0080 /* Port in fragile open state */
+#define CH_CLOSING 0x0100 /* Port in fragile close state */
+#define CH_FIFO_ENABLED 0x0200 /* Port has FIFOs enabled */
+#define CH_TX_FIFO_EMPTY 0x0400 /* TX Fifo is completely empty */
+#define CH_TX_FIFO_LWM 0x0800 /* TX Fifo is below Low Water */
+#define CH_BREAK_SENDING 0x1000 /* Break is being sent */
+#define CH_LOOPBACK 0x2000 /* Channel is in lookback mode */
+#define CH_FLIPBUF_IN_USE 0x4000 /* Channel's flipbuf is in use */
+#define CH_BAUD0 0x08000 /* Used for checking B0 transitions */
+
+/* Our Read/Error/Write queue sizes */
+#define RQUEUEMASK 0x1FFF /* 8 K - 1 */
+#define EQUEUEMASK 0x1FFF /* 8 K - 1 */
+#define WQUEUEMASK 0x0FFF /* 4 K - 1 */
+#define RQUEUESIZE (RQUEUEMASK + 1)
+#define EQUEUESIZE RQUEUESIZE
+#define WQUEUESIZE (WQUEUEMASK + 1)
+
+
+/************************************************************************
+ * Channel information structure.
+ ************************************************************************/
+struct jsm_channel {
+ struct uart_port uart_port;
+ struct jsm_board *ch_bd; /* Board structure pointer */
+
+ spinlock_t ch_lock; /* provide for serialization */
+ wait_queue_head_t ch_flags_wait;
+
+ u32 ch_portnum; /* Port number, 0 offset. */
+ u32 ch_open_count; /* open count */
+ u32 ch_flags; /* Channel flags */
+
+ u64 ch_close_delay; /* How long we should drop RTS/DTR for */
+
+ u64 ch_cpstime; /* Time for CPS calculations */
+
+ tcflag_t ch_c_iflag; /* channel iflags */
+ tcflag_t ch_c_cflag; /* channel cflags */
+ tcflag_t ch_c_oflag; /* channel oflags */
+ tcflag_t ch_c_lflag; /* channel lflags */
+ u8 ch_stopc; /* Stop character */
+ u8 ch_startc; /* Start character */
+
+ u32 ch_old_baud; /* Cache of the current baud */
+ u32 ch_custom_speed;/* Custom baud, if set */
+
+ u32 ch_wopen; /* Waiting for open process cnt */
+
+ u8 ch_mostat; /* FEP output modem status */
+ u8 ch_mistat; /* FEP input modem status */
+
+ struct neo_uart_struct __iomem *ch_neo_uart; /* Pointer to the "mapped" UART struct */
+ u8 ch_cached_lsr; /* Cached value of the LSR register */
+
+ u8 *ch_rqueue; /* Our read queue buffer - malloc'ed */
+ u16 ch_r_head; /* Head location of the read queue */
+ u16 ch_r_tail; /* Tail location of the read queue */
+
+ u8 *ch_equeue; /* Our error queue buffer - malloc'ed */
+ u16 ch_e_head; /* Head location of the error queue */
+ u16 ch_e_tail; /* Tail location of the error queue */
+
+ u8 *ch_wqueue; /* Our write queue buffer - malloc'ed */
+ u16 ch_w_head; /* Head location of the write queue */
+ u16 ch_w_tail; /* Tail location of the write queue */
+
+ u64 ch_rxcount; /* total of data received so far */
+ u64 ch_txcount; /* total of data transmitted so far */
+
+ u8 ch_r_tlevel; /* Receive Trigger level */
+ u8 ch_t_tlevel; /* Transmit Trigger level */
+
+ u8 ch_r_watermark; /* Receive Watermark */
+
+
+ u32 ch_stops_sent; /* How many times I have sent a stop character
+ * to try to stop the other guy sending.
+ */
+ u64 ch_err_parity; /* Count of parity errors on channel */
+ u64 ch_err_frame; /* Count of framing errors on channel */
+ u64 ch_err_break; /* Count of breaks on channel */
+ u64 ch_err_overrun; /* Count of overruns on channel */
+
+ u64 ch_xon_sends; /* Count of xons transmitted */
+ u64 ch_xoff_sends; /* Count of xoffs transmitted */
+};
+
+
+/************************************************************************
+ * Per channel/port NEO UART structure *
+ ************************************************************************
+ * Base Structure Entries Usage Meanings to Host *
+ * *
+ * W = read write R = read only *
+ * U = Unused. *
+ ************************************************************************/
+
+struct neo_uart_struct {
+ u8 txrx; /* WR RHR/THR - Holding Reg */
+ u8 ier; /* WR IER - Interrupt Enable Reg */
+ u8 isr_fcr; /* WR ISR/FCR - Interrupt Status Reg/Fifo Control Reg */
+ u8 lcr; /* WR LCR - Line Control Reg */
+ u8 mcr; /* WR MCR - Modem Control Reg */
+ u8 lsr; /* WR LSR - Line Status Reg */
+ u8 msr; /* WR MSR - Modem Status Reg */
+ u8 spr; /* WR SPR - Scratch Pad Reg */
+ u8 fctr; /* WR FCTR - Feature Control Reg */
+ u8 efr; /* WR EFR - Enhanced Function Reg */
+ u8 tfifo; /* WR TXCNT/TXTRG - Transmit FIFO Reg */
+ u8 rfifo; /* WR RXCNT/RXTRG - Recieve FIFO Reg */
+ u8 xoffchar1; /* WR XOFF 1 - XOff Character 1 Reg */
+ u8 xoffchar2; /* WR XOFF 2 - XOff Character 2 Reg */
+ u8 xonchar1; /* WR XON 1 - Xon Character 1 Reg */
+ u8 xonchar2; /* WR XON 2 - XOn Character 2 Reg */
+
+ u8 reserved1[0x2ff - 0x200]; /* U Reserved by Exar */
+ u8 txrxburst[64]; /* RW 64 bytes of RX/TX FIFO Data */
+ u8 reserved2[0x37f - 0x340]; /* U Reserved by Exar */
+ u8 rxburst_with_errors[64]; /* R 64 bytes of RX FIFO Data + LSR */
+};
+
+/* Where to read the extended interrupt register (32bits instead of 8bits) */
+#define UART_17158_POLL_ADDR_OFFSET 0x80
+
+/*
+ * These are the redefinitions for the FCTR on the XR17C158, since
+ * Exar made them different than their earlier design. (XR16C854)
+ */
+
+/* These are only applicable when table D is selected */
+#define UART_17158_FCTR_RTS_NODELAY 0x00
+#define UART_17158_FCTR_RTS_4DELAY 0x01
+#define UART_17158_FCTR_RTS_6DELAY 0x02
+#define UART_17158_FCTR_RTS_8DELAY 0x03
+#define UART_17158_FCTR_RTS_12DELAY 0x12
+#define UART_17158_FCTR_RTS_16DELAY 0x05
+#define UART_17158_FCTR_RTS_20DELAY 0x13
+#define UART_17158_FCTR_RTS_24DELAY 0x06
+#define UART_17158_FCTR_RTS_28DELAY 0x14
+#define UART_17158_FCTR_RTS_32DELAY 0x07
+#define UART_17158_FCTR_RTS_36DELAY 0x16
+#define UART_17158_FCTR_RTS_40DELAY 0x08
+#define UART_17158_FCTR_RTS_44DELAY 0x09
+#define UART_17158_FCTR_RTS_48DELAY 0x10
+#define UART_17158_FCTR_RTS_52DELAY 0x11
+
+#define UART_17158_FCTR_RTS_IRDA 0x10
+#define UART_17158_FCTR_RS485 0x20
+#define UART_17158_FCTR_TRGA 0x00
+#define UART_17158_FCTR_TRGB 0x40
+#define UART_17158_FCTR_TRGC 0x80
+#define UART_17158_FCTR_TRGD 0xC0
+
+/* 17158 trigger table selects.. */
+#define UART_17158_FCTR_BIT6 0x40
+#define UART_17158_FCTR_BIT7 0x80
+
+/* 17158 TX/RX memmapped buffer offsets */
+#define UART_17158_RX_FIFOSIZE 64
+#define UART_17158_TX_FIFOSIZE 64
+
+/* 17158 Extended IIR's */
+#define UART_17158_IIR_RDI_TIMEOUT 0x0C /* Receiver data TIMEOUT */
+#define UART_17158_IIR_XONXOFF 0x10 /* Received an XON/XOFF char */
+#define UART_17158_IIR_HWFLOW_STATE_CHANGE 0x20 /* CTS/DSR or RTS/DTR state change */
+#define UART_17158_IIR_FIFO_ENABLED 0xC0 /* 16550 FIFOs are Enabled */
+
+/*
+ * These are the extended interrupts that get sent
+ * back to us from the UART's 32bit interrupt register
+ */
+#define UART_17158_RX_LINE_STATUS 0x1 /* RX Ready */
+#define UART_17158_RXRDY_TIMEOUT 0x2 /* RX Ready Timeout */
+#define UART_17158_TXRDY 0x3 /* TX Ready */
+#define UART_17158_MSR 0x4 /* Modem State Change */
+#define UART_17158_TX_AND_FIFO_CLR 0x40 /* Transmitter Holding Reg Empty */
+#define UART_17158_RX_FIFO_DATA_ERROR 0x80 /* UART detected an RX FIFO Data error */
+
+/*
+ * These are the EXTENDED definitions for the 17C158's Interrupt
+ * Enable Register.
+ */
+#define UART_17158_EFR_ECB 0x10 /* Enhanced control bit */
+#define UART_17158_EFR_IXON 0x2 /* Receiver compares Xon1/Xoff1 */
+#define UART_17158_EFR_IXOFF 0x8 /* Transmit Xon1/Xoff1 */
+#define UART_17158_EFR_RTSDTR 0x40 /* Auto RTS/DTR Flow Control Enable */
+#define UART_17158_EFR_CTSDSR 0x80 /* Auto CTS/DSR Flow COntrol Enable */
+
+#define UART_17158_XOFF_DETECT 0x1 /* Indicates whether chip saw an incoming XOFF char */
+#define UART_17158_XON_DETECT 0x2 /* Indicates whether chip saw an incoming XON char */
+
+#define UART_17158_IER_RSVD1 0x10 /* Reserved by Exar */
+#define UART_17158_IER_XOFF 0x20 /* Xoff Interrupt Enable */
+#define UART_17158_IER_RTSDTR 0x40 /* Output Interrupt Enable */
+#define UART_17158_IER_CTSDSR 0x80 /* Input Interrupt Enable */
+
+#define PCI_DEVICE_NEO_2DB9_PCI_NAME "Neo 2 - DB9 Universal PCI"
+#define PCI_DEVICE_NEO_2DB9PRI_PCI_NAME "Neo 2 - DB9 Universal PCI - Powered Ring Indicator"
+#define PCI_DEVICE_NEO_2RJ45_PCI_NAME "Neo 2 - RJ45 Universal PCI"
+#define PCI_DEVICE_NEO_2RJ45PRI_PCI_NAME "Neo 2 - RJ45 Universal PCI - Powered Ring Indicator"
+
+/*
+ * Our Global Variables.
+ */
+extern struct uart_driver jsm_uart_driver;
+extern struct board_ops jsm_neo_ops;
+extern int jsm_debug;
+extern int jsm_rawreadok;
+
+extern int jsm_driver_state; /* The state of the driver */
+extern char *jsm_driver_state_text[];/* Array of driver state text */
+
+extern spinlock_t jsm_board_head_lock;
+extern struct list_head jsm_board_head;
+
+/*************************************************************************
+ *
+ * Prototypes for non-static functions used in more than one module
+ *
+ *************************************************************************/
+int jsm_tty_write(struct uart_port *port);
+int jsm_tty_init(struct jsm_board *);
+int jsm_uart_port_init(struct jsm_board *);
+int jsm_remove_uart_port(struct jsm_board *);
+void jsm_input(struct jsm_channel *ch);
+void jsm_carrier(struct jsm_channel *ch);
+void jsm_check_queue_flow_control(struct jsm_channel *ch);
+
+void jsm_create_driver_sysfiles(struct device_driver *);
+void jsm_remove_driver_sysfiles(struct device_driver *);
+
+#endif
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
new file mode 100644
index 00000000000..d4847d4f147
--- /dev/null
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -0,0 +1,404 @@
+/************************************************************************
+ * Copyright 2003 Digi International (www.digi.com)
+ *
+ * Copyright (C) 2004 IBM Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the
+ * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ * PURPOSE. See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 * Temple Place - Suite 330, Boston,
+ * MA 02111-1307, USA.
+ *
+ * Contact Information:
+ * Scott H Kilau <Scott_Kilau@digi.com>
+ * Wendy Xiong <wendyx@us.ltcfwd.linux.ibm.com>
+ *
+ ***********************************************************************/
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+
+#include "jsm.h"
+
+MODULE_AUTHOR("Digi International, http://www.digi.com");
+MODULE_DESCRIPTION("Driver for the Digi International Neo PCI based product line");
+MODULE_SUPPORTED_DEVICE("jsm");
+
+#define JSM_DRIVER_NAME "jsm"
+#define NR_PORTS 32
+#define JSM_MINOR_START 0
+
+struct uart_driver jsm_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = JSM_DRIVER_NAME,
+ .dev_name = "ttyn",
+ .major = 253,
+ .minor = JSM_MINOR_START,
+ .nr = NR_PORTS,
+ .cons = NULL,
+};
+
+int jsm_debug;
+int jsm_rawreadok;
+module_param(jsm_debug, int, 0);
+module_param(jsm_rawreadok, int, 0);
+MODULE_PARM_DESC(jsm_debug, "Driver debugging level");
+MODULE_PARM_DESC(jsm_rawreadok, "Bypass flip buffers on input");
+
+/*
+ * Globals
+ */
+int jsm_driver_state = DRIVER_INITIALIZED;
+spinlock_t jsm_board_head_lock = SPIN_LOCK_UNLOCKED;
+LIST_HEAD(jsm_board_head);
+
+static struct pci_device_id jsm_pci_tbl[] = {
+ { PCI_DEVICE (PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2DB9), 0, 0, 0 },
+ { PCI_DEVICE (PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2DB9PRI), 0, 0, 1 },
+ { PCI_DEVICE (PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45), 0, 0, 2 },
+ { PCI_DEVICE (PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45PRI), 0, 0, 3 },
+ { 0,} /* 0 terminated list. */
+};
+MODULE_DEVICE_TABLE(pci, jsm_pci_tbl);
+
+static struct board_id jsm_Ids[] = {
+ { PCI_DEVICE_NEO_2DB9_PCI_NAME, 2 },
+ { PCI_DEVICE_NEO_2DB9PRI_PCI_NAME, 2 },
+ { PCI_DEVICE_NEO_2RJ45_PCI_NAME, 2 },
+ { PCI_DEVICE_NEO_2RJ45PRI_PCI_NAME, 2 },
+ { NULL, 0 }
+};
+
+char *jsm_driver_state_text[] = {
+ "Driver Initialized",
+ "Driver Ready."
+};
+
+static int jsm_finalize_board_init(struct jsm_board *brd)
+{
+ int rc = 0;
+
+ jsm_printk(INIT, INFO, &brd->pci_dev, "start\n");
+
+ if (brd->irq) {
+ rc = request_irq(brd->irq, brd->bd_ops->intr, SA_INTERRUPT|SA_SHIRQ, "JSM", brd);
+
+ if (rc) {
+ printk(KERN_WARNING "Failed to hook IRQ %d\n",brd->irq);
+ brd->state = BOARD_FAILED;
+ brd->dpastatus = BD_NOFEP;
+ rc = -ENODEV;
+ } else
+ jsm_printk(INIT, INFO, &brd->pci_dev,
+ "Requested and received usage of IRQ %d\n", brd->irq);
+ }
+ return rc;
+}
+
+/*
+ * jsm_found_board()
+ *
+ * A board has been found, init it.
+ */
+static int jsm_found_board(struct pci_dev *pdev, int id)
+{
+ struct jsm_board *brd;
+ int i = 0;
+ int rc = 0;
+ struct list_head *tmp;
+ struct jsm_board *cur_board_entry;
+ unsigned long lock_flags;
+ int adapter_count = 0;
+ int retval;
+
+ brd = kmalloc(sizeof(struct jsm_board), GFP_KERNEL);
+ if (!brd) {
+ dev_err(&pdev->dev, "memory allocation for board structure failed\n");
+ return -ENOMEM;
+ }
+ memset(brd, 0, sizeof(struct jsm_board));
+
+ spin_lock_irqsave(&jsm_board_head_lock, lock_flags);
+ list_for_each(tmp, &jsm_board_head) {
+ cur_board_entry =
+ list_entry(tmp, struct jsm_board,
+ jsm_board_entry);
+ if (cur_board_entry->boardnum != adapter_count) {
+ break;
+ }
+ adapter_count++;
+ }
+
+ list_add_tail(&brd->jsm_board_entry, &jsm_board_head);
+ spin_unlock_irqrestore(&jsm_board_head_lock, lock_flags);
+
+ /* store the info for the board we've found */
+ brd->boardnum = adapter_count;
+ brd->pci_dev = pdev;
+ brd->name = jsm_Ids[id].name;
+ brd->maxports = jsm_Ids[id].maxports;
+ brd->dpastatus = BD_NOFEP;
+ init_waitqueue_head(&brd->state_wait);
+
+ spin_lock_init(&brd->bd_lock);
+ spin_lock_init(&brd->bd_intr_lock);
+
+ brd->state = BOARD_FOUND;
+
+ for (i = 0; i < brd->maxports; i++)
+ brd->channels[i] = NULL;
+
+ /* store which revision we have */
+ pci_read_config_byte(pdev, PCI_REVISION_ID, &brd->rev);
+
+ brd->irq = pdev->irq;
+
+ switch(brd->pci_dev->device) {
+
+ case PCI_DEVICE_ID_NEO_2DB9:
+ case PCI_DEVICE_ID_NEO_2DB9PRI:
+ case PCI_DEVICE_ID_NEO_2RJ45:
+ case PCI_DEVICE_ID_NEO_2RJ45PRI:
+
+ /*
+ * This chip is set up 100% when we get to it.
+ * No need to enable global interrupts or anything.
+ */
+ brd->dpatype = T_NEO | T_PCIBUS;
+
+ jsm_printk(INIT, INFO, &brd->pci_dev,
+ "jsm_found_board - NEO adapter\n");
+
+ /* get the PCI Base Address Registers */
+ brd->membase = pci_resource_start(pdev, 0);
+ brd->membase_end = pci_resource_end(pdev, 0);
+
+ if (brd->membase & 1)
+ brd->membase &= ~3;
+ else
+ brd->membase &= ~15;
+
+ /* Assign the board_ops struct */
+ brd->bd_ops = &jsm_neo_ops;
+
+ brd->bd_uart_offset = 0x200;
+ brd->bd_dividend = 921600;
+
+ brd->re_map_membase = ioremap(brd->membase, 0x1000);
+ jsm_printk(INIT, INFO, &brd->pci_dev,
+ "remapped mem: 0x%p\n", brd->re_map_membase);
+ if (!brd->re_map_membase) {
+ kfree(brd);
+ dev_err(&pdev->dev, "card has no PCI Memory resources, failing board.\n");
+ return -ENOMEM;
+ }
+ break;
+
+ default:
+ dev_err(&pdev->dev, "Did not find any compatible Neo or Classic PCI boards in system.\n");
+ kfree(brd);
+ return -ENXIO;
+ }
+
+ /*
+ * Do tty device initialization.
+ */
+ rc = jsm_finalize_board_init(brd);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "Can't finalize board init (%d)\n", rc);
+ brd->state = BOARD_FAILED;
+ retval = -ENXIO;
+ goto failed0;
+ }
+
+ rc = jsm_tty_init(brd);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "Can't init tty devices (%d)\n", rc);
+ brd->state = BOARD_FAILED;
+ retval = -ENXIO;
+ goto failed1;
+ }
+
+ rc = jsm_uart_port_init(brd);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "Can't init uart port (%d)\n", rc);
+ brd->state = BOARD_FAILED;
+ retval = -ENXIO;
+ goto failed1;
+ }
+
+ brd->state = BOARD_READY;
+ brd->dpastatus = BD_RUNNING;
+
+ /* Log the information about the board */
+ dev_info(&pdev->dev, "board %d: %s (rev %d), irq %d\n",adapter_count, brd->name, brd->rev, brd->irq);
+
+ /*
+ * allocate flip buffer for board.
+ *
+ * Okay to malloc with GFP_KERNEL, we are not at interrupt
+ * context, and there are no locks held.
+ */
+ brd->flipbuf = kmalloc(MYFLIPLEN, GFP_KERNEL);
+ if (!brd->flipbuf) {
+ dev_err(&pdev->dev, "memory allocation for flipbuf failed\n");
+ brd->state = BOARD_FAILED;
+ retval = -ENOMEM;
+ goto failed1;
+ }
+ memset(brd->flipbuf, 0, MYFLIPLEN);
+
+ jsm_create_driver_sysfiles(pdev->dev.driver);
+
+ wake_up_interruptible(&brd->state_wait);
+ return 0;
+failed1:
+ free_irq(brd->irq, brd);
+failed0:
+ kfree(brd);
+ iounmap(brd->re_map_membase);
+ return retval;
+}
+
+/* returns count (>= 0), or negative on error */
+static int jsm_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ int rc;
+
+ rc = pci_enable_device(pdev);
+ if (rc) {
+ dev_err(&pdev->dev, "Device enable FAILED\n");
+ return rc;
+ }
+
+ if ((rc = pci_request_regions(pdev, "jsm"))) {
+ dev_err(&pdev->dev, "pci_request_region FAILED\n");
+ pci_disable_device(pdev);
+ return rc;
+ }
+
+ if ((rc = jsm_found_board(pdev, ent->driver_data))) {
+ dev_err(&pdev->dev, "jsm_found_board FAILED\n");
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ return rc;
+ }
+ return rc;
+}
+
+
+/*
+ * jsm_cleanup_board()
+ *
+ * Free all the memory associated with a board
+ */
+static void jsm_cleanup_board(struct jsm_board *brd)
+{
+ int i = 0;
+
+ free_irq(brd->irq, brd);
+ iounmap(brd->re_map_membase);
+
+ /* Free all allocated channels structs */
+ for (i = 0; i < brd->maxports; i++) {
+ if (brd->channels[i]) {
+ if (brd->channels[i]->ch_rqueue)
+ kfree(brd->channels[i]->ch_rqueue);
+ if (brd->channels[i]->ch_equeue)
+ kfree(brd->channels[i]->ch_equeue);
+ if (brd->channels[i]->ch_wqueue)
+ kfree(brd->channels[i]->ch_wqueue);
+ kfree(brd->channels[i]);
+ }
+ }
+
+ pci_release_regions(brd->pci_dev);
+ pci_disable_device(brd->pci_dev);
+ kfree(brd->flipbuf);
+ kfree(brd);
+}
+
+static void jsm_remove_one(struct pci_dev *dev)
+{
+ unsigned long lock_flags;
+ struct list_head *tmp;
+ struct jsm_board *brd;
+
+ spin_lock_irqsave(&jsm_board_head_lock, lock_flags);
+ list_for_each(tmp, &jsm_board_head) {
+ brd = list_entry(tmp, struct jsm_board,
+ jsm_board_entry);
+ if ( brd != NULL && brd->pci_dev == dev) {
+ jsm_remove_uart_port(brd);
+ jsm_cleanup_board(brd);
+ list_del(&brd->jsm_board_entry);
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&jsm_board_head_lock, lock_flags);
+ return;
+}
+
+struct pci_driver jsm_driver = {
+ .name = "jsm",
+ .probe = jsm_init_one,
+ .id_table = jsm_pci_tbl,
+ .remove = __devexit_p(jsm_remove_one),
+};
+
+/*
+ * jsm_init_module()
+ *
+ * Module load. This is where it all starts.
+ */
+static int __init jsm_init_module(void)
+{
+ int rc = 0;
+
+ printk(KERN_INFO "%s, Digi International Part Number %s\n",
+ JSM_VERSION, JSM_VERSION);
+
+ /*
+ * Initialize global stuff
+ */
+
+ rc = uart_register_driver(&jsm_uart_driver);
+ if (rc < 0) {
+ return rc;
+ }
+
+ rc = pci_register_driver(&jsm_driver);
+ if (rc < 0) {
+ uart_unregister_driver(&jsm_uart_driver);
+ return rc;
+ }
+ jsm_driver_state = DRIVER_READY;
+
+ return rc;
+}
+
+module_init(jsm_init_module);
+
+/*
+ * jsm_exit_module()
+ *
+ * Module unload. This is where it all ends.
+ */
+static void __exit jsm_exit_module(void)
+{
+ jsm_remove_driver_sysfiles(&jsm_driver.driver);
+
+ pci_unregister_driver(&jsm_driver);
+
+ uart_unregister_driver(&jsm_uart_driver);
+}
+module_exit(jsm_exit_module);
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/jsm/jsm_neo.c b/drivers/serial/jsm/jsm_neo.c
new file mode 100644
index 00000000000..9b79c1ff6c7
--- /dev/null
+++ b/drivers/serial/jsm/jsm_neo.c
@@ -0,0 +1,1427 @@
+/************************************************************************
+ * Copyright 2003 Digi International (www.digi.com)
+ *
+ * Copyright (C) 2004 IBM Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the
+ * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ * PURPOSE. See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 * Temple Place - Suite 330, Boston,
+ * MA 02111-1307, USA.
+ *
+ * Contact Information:
+ * Scott H Kilau <Scott_Kilau@digi.com>
+ * Wendy Xiong <wendyx@us.ltcfwd.linux.ibm.com>
+ *
+ ***********************************************************************/
+#include <linux/delay.h> /* For udelay */
+#include <linux/serial_reg.h> /* For the various UART offsets */
+#include <linux/tty.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+
+#include "jsm.h" /* Driver main header file */
+
+static u32 jsm_offset_table[8] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80 };
+
+/*
+ * This function allows calls to ensure that all outstanding
+ * PCI writes have been completed, by doing a PCI read against
+ * a non-destructive, read-only location on the Neo card.
+ *
+ * In this case, we are reading the DVID (Read-only Device Identification)
+ * value of the Neo card.
+ */
+static inline void neo_pci_posting_flush(struct jsm_board *bd)
+{
+ readb(bd->re_map_membase + 0x8D);
+}
+
+static void neo_set_cts_flow_control(struct jsm_channel *ch)
+{
+ u8 ier = readb(&ch->ch_neo_uart->ier);
+ u8 efr = readb(&ch->ch_neo_uart->efr);
+
+ jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting CTSFLOW\n");
+
+ /* Turn on auto CTS flow control */
+ ier |= (UART_17158_IER_CTSDSR);
+ efr |= (UART_17158_EFR_ECB | UART_17158_EFR_CTSDSR);
+
+ /* Turn off auto Xon flow control */
+ efr &= ~(UART_17158_EFR_IXON);
+
+ /* Why? Becuz Exar's spec says we have to zero it out before setting it */
+ writeb(0, &ch->ch_neo_uart->efr);
+
+ /* Turn on UART enhanced bits */
+ writeb(efr, &ch->ch_neo_uart->efr);
+
+ /* Turn on table D, with 8 char hi/low watermarks */
+ writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_4DELAY), &ch->ch_neo_uart->fctr);
+
+ /* Feed the UART our trigger levels */
+ writeb(8, &ch->ch_neo_uart->tfifo);
+ ch->ch_t_tlevel = 8;
+
+ writeb(ier, &ch->ch_neo_uart->ier);
+}
+
+static void neo_set_rts_flow_control(struct jsm_channel *ch)
+{
+ u8 ier = readb(&ch->ch_neo_uart->ier);
+ u8 efr = readb(&ch->ch_neo_uart->efr);
+
+ jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting RTSFLOW\n");
+
+ /* Turn on auto RTS flow control */
+ ier |= (UART_17158_IER_RTSDTR);
+ efr |= (UART_17158_EFR_ECB | UART_17158_EFR_RTSDTR);
+
+ /* Turn off auto Xoff flow control */
+ ier &= ~(UART_17158_IER_XOFF);
+ efr &= ~(UART_17158_EFR_IXOFF);
+
+ /* Why? Becuz Exar's spec says we have to zero it out before setting it */
+ writeb(0, &ch->ch_neo_uart->efr);
+
+ /* Turn on UART enhanced bits */
+ writeb(efr, &ch->ch_neo_uart->efr);
+
+ writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_4DELAY), &ch->ch_neo_uart->fctr);
+ ch->ch_r_watermark = 4;
+
+ writeb(56, &ch->ch_neo_uart->rfifo);
+ ch->ch_r_tlevel = 56;
+
+ writeb(ier, &ch->ch_neo_uart->ier);
+
+ /*
+ * From the Neo UART spec sheet:
+ * The auto RTS/DTR function must be started by asserting
+ * RTS/DTR# output pin (MCR bit-0 or 1 to logic 1 after
+ * it is enabled.
+ */
+ ch->ch_mostat |= (UART_MCR_RTS);
+}
+
+
+static void neo_set_ixon_flow_control(struct jsm_channel *ch)
+{
+ u8 ier = readb(&ch->ch_neo_uart->ier);
+ u8 efr = readb(&ch->ch_neo_uart->efr);
+
+ jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting IXON FLOW\n");
+
+ /* Turn off auto CTS flow control */
+ ier &= ~(UART_17158_IER_CTSDSR);
+ efr &= ~(UART_17158_EFR_CTSDSR);
+
+ /* Turn on auto Xon flow control */
+ efr |= (UART_17158_EFR_ECB | UART_17158_EFR_IXON);
+
+ /* Why? Becuz Exar's spec says we have to zero it out before setting it */
+ writeb(0, &ch->ch_neo_uart->efr);
+
+ /* Turn on UART enhanced bits */
+ writeb(efr, &ch->ch_neo_uart->efr);
+
+ writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr);
+ ch->ch_r_watermark = 4;
+
+ writeb(32, &ch->ch_neo_uart->rfifo);
+ ch->ch_r_tlevel = 32;
+
+ /* Tell UART what start/stop chars it should be looking for */
+ writeb(ch->ch_startc, &ch->ch_neo_uart->xonchar1);
+ writeb(0, &ch->ch_neo_uart->xonchar2);
+
+ writeb(ch->ch_stopc, &ch->ch_neo_uart->xoffchar1);
+ writeb(0, &ch->ch_neo_uart->xoffchar2);
+
+ writeb(ier, &ch->ch_neo_uart->ier);
+}
+
+static void neo_set_ixoff_flow_control(struct jsm_channel *ch)
+{
+ u8 ier = readb(&ch->ch_neo_uart->ier);
+ u8 efr = readb(&ch->ch_neo_uart->efr);
+
+ jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Setting IXOFF FLOW\n");
+
+ /* Turn off auto RTS flow control */
+ ier &= ~(UART_17158_IER_RTSDTR);
+ efr &= ~(UART_17158_EFR_RTSDTR);
+
+ /* Turn on auto Xoff flow control */
+ ier |= (UART_17158_IER_XOFF);
+ efr |= (UART_17158_EFR_ECB | UART_17158_EFR_IXOFF);
+
+ /* Why? Becuz Exar's spec says we have to zero it out before setting it */
+ writeb(0, &ch->ch_neo_uart->efr);
+
+ /* Turn on UART enhanced bits */
+ writeb(efr, &ch->ch_neo_uart->efr);
+
+ /* Turn on table D, with 8 char hi/low watermarks */
+ writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr);
+
+ writeb(8, &ch->ch_neo_uart->tfifo);
+ ch->ch_t_tlevel = 8;
+
+ /* Tell UART what start/stop chars it should be looking for */
+ writeb(ch->ch_startc, &ch->ch_neo_uart->xonchar1);
+ writeb(0, &ch->ch_neo_uart->xonchar2);
+
+ writeb(ch->ch_stopc, &ch->ch_neo_uart->xoffchar1);
+ writeb(0, &ch->ch_neo_uart->xoffchar2);
+
+ writeb(ier, &ch->ch_neo_uart->ier);
+}
+
+static void neo_set_no_input_flow_control(struct jsm_channel *ch)
+{
+ u8 ier = readb(&ch->ch_neo_uart->ier);
+ u8 efr = readb(&ch->ch_neo_uart->efr);
+
+ jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Unsetting Input FLOW\n");
+
+ /* Turn off auto RTS flow control */
+ ier &= ~(UART_17158_IER_RTSDTR);
+ efr &= ~(UART_17158_EFR_RTSDTR);
+
+ /* Turn off auto Xoff flow control */
+ ier &= ~(UART_17158_IER_XOFF);
+ if (ch->ch_c_iflag & IXON)
+ efr &= ~(UART_17158_EFR_IXOFF);
+ else
+ efr &= ~(UART_17158_EFR_ECB | UART_17158_EFR_IXOFF);
+
+ /* Why? Becuz Exar's spec says we have to zero it out before setting it */
+ writeb(0, &ch->ch_neo_uart->efr);
+
+ /* Turn on UART enhanced bits */
+ writeb(efr, &ch->ch_neo_uart->efr);
+
+ /* Turn on table D, with 8 char hi/low watermarks */
+ writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr);
+
+ ch->ch_r_watermark = 0;
+
+ writeb(16, &ch->ch_neo_uart->tfifo);
+ ch->ch_t_tlevel = 16;
+
+ writeb(16, &ch->ch_neo_uart->rfifo);
+ ch->ch_r_tlevel = 16;
+
+ writeb(ier, &ch->ch_neo_uart->ier);
+}
+
+static void neo_set_no_output_flow_control(struct jsm_channel *ch)
+{
+ u8 ier = readb(&ch->ch_neo_uart->ier);
+ u8 efr = readb(&ch->ch_neo_uart->efr);
+
+ jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "Unsetting Output FLOW\n");
+
+ /* Turn off auto CTS flow control */
+ ier &= ~(UART_17158_IER_CTSDSR);
+ efr &= ~(UART_17158_EFR_CTSDSR);
+
+ /* Turn off auto Xon flow control */
+ if (ch->ch_c_iflag & IXOFF)
+ efr &= ~(UART_17158_EFR_IXON);
+ else
+ efr &= ~(UART_17158_EFR_ECB | UART_17158_EFR_IXON);
+
+ /* Why? Becuz Exar's spec says we have to zero it out before setting it */
+ writeb(0, &ch->ch_neo_uart->efr);
+
+ /* Turn on UART enhanced bits */
+ writeb(efr, &ch->ch_neo_uart->efr);
+
+ /* Turn on table D, with 8 char hi/low watermarks */
+ writeb((UART_17158_FCTR_TRGD | UART_17158_FCTR_RTS_8DELAY), &ch->ch_neo_uart->fctr);
+
+ ch->ch_r_watermark = 0;
+
+ writeb(16, &ch->ch_neo_uart->tfifo);
+ ch->ch_t_tlevel = 16;
+
+ writeb(16, &ch->ch_neo_uart->rfifo);
+ ch->ch_r_tlevel = 16;
+
+ writeb(ier, &ch->ch_neo_uart->ier);
+}
+
+static inline void neo_set_new_start_stop_chars(struct jsm_channel *ch)
+{
+
+ /* if hardware flow control is set, then skip this whole thing */
+ if (ch->ch_c_cflag & CRTSCTS)
+ return;
+
+ jsm_printk(PARAM, INFO, &ch->ch_bd->pci_dev, "start\n");
+
+ /* Tell UART what start/stop chars it should be looking for */
+ writeb(ch->ch_startc, &ch->ch_neo_uart->xonchar1);
+ writeb(0, &ch->ch_neo_uart->xonchar2);
+
+ writeb(ch->ch_stopc, &ch->ch_neo_uart->xoffchar1);
+ writeb(0, &ch->ch_neo_uart->xoffchar2);
+}
+
+static void neo_copy_data_from_uart_to_queue(struct jsm_channel *ch)
+{
+ int qleft = 0;
+ u8 linestatus = 0;
+ u8 error_mask = 0;
+ int n = 0;
+ int total = 0;
+ u16 head;
+ u16 tail;
+
+ if (!ch)
+ return;
+
+ /* cache head and tail of queue */
+ head = ch->ch_r_head & RQUEUEMASK;
+ tail = ch->ch_r_tail & RQUEUEMASK;
+
+ /* Get our cached LSR */
+ linestatus = ch->ch_cached_lsr;
+ ch->ch_cached_lsr = 0;
+
+ /* Store how much space we have left in the queue */
+ if ((qleft = tail - head - 1) < 0)
+ qleft += RQUEUEMASK + 1;
+
+ /*
+ * If the UART is not in FIFO mode, force the FIFO copy to
+ * NOT be run, by setting total to 0.
+ *
+ * On the other hand, if the UART IS in FIFO mode, then ask
+ * the UART to give us an approximation of data it has RX'ed.
+ */
+ if (!(ch->ch_flags & CH_FIFO_ENABLED))
+ total = 0;
+ else {
+ total = readb(&ch->ch_neo_uart->rfifo);
+
+ /*
+ * EXAR chip bug - RX FIFO COUNT - Fudge factor.
+ *
+ * This resolves a problem/bug with the Exar chip that sometimes
+ * returns a bogus value in the rfifo register.
+ * The count can be any where from 0-3 bytes "off".
+ * Bizarre, but true.
+ */
+ total -= 3;
+ }
+
+ /*
+ * Finally, bound the copy to make sure we don't overflow
+ * our own queue...
+ * The byte by byte copy loop below this loop this will
+ * deal with the queue overflow possibility.
+ */
+ total = min(total, qleft);
+
+ while (total > 0) {
+ /*
+ * Grab the linestatus register, we need to check
+ * to see if there are any errors in the FIFO.
+ */
+ linestatus = readb(&ch->ch_neo_uart->lsr);
+
+ /*
+ * Break out if there is a FIFO error somewhere.
+ * This will allow us to go byte by byte down below,
+ * finding the exact location of the error.
+ */
+ if (linestatus & UART_17158_RX_FIFO_DATA_ERROR)
+ break;
+
+ /* Make sure we don't go over the end of our queue */
+ n = min(((u32) total), (RQUEUESIZE - (u32) head));
+
+ /*
+ * Cut down n even further if needed, this is to fix
+ * a problem with memcpy_fromio() with the Neo on the
+ * IBM pSeries platform.
+ * 15 bytes max appears to be the magic number.
+ */
+ n = min((u32) n, (u32) 12);
+
+ /*
+ * Since we are grabbing the linestatus register, which
+ * will reset some bits after our read, we need to ensure
+ * we don't miss our TX FIFO emptys.
+ */
+ if (linestatus & (UART_LSR_THRE | UART_17158_TX_AND_FIFO_CLR))
+ ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
+
+ linestatus = 0;
+
+ /* Copy data from uart to the queue */
+ memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, n);
+ /*
+ * Since RX_FIFO_DATA_ERROR was 0, we are guarenteed
+ * that all the data currently in the FIFO is free of
+ * breaks and parity/frame/orun errors.
+ */
+ memset(ch->ch_equeue + head, 0, n);
+
+ /* Add to and flip head if needed */
+ head = (head + n) & RQUEUEMASK;
+ total -= n;
+ qleft -= n;
+ ch->ch_rxcount += n;
+ }
+
+ /*
+ * Create a mask to determine whether we should
+ * insert the character (if any) into our queue.
+ */
+ if (ch->ch_c_iflag & IGNBRK)
+ error_mask |= UART_LSR_BI;
+
+ /*
+ * Now cleanup any leftover bytes still in the UART.
+ * Also deal with any possible queue overflow here as well.
+ */
+ while (1) {
+
+ /*
+ * Its possible we have a linestatus from the loop above
+ * this, so we "OR" on any extra bits.
+ */
+ linestatus |= readb(&ch->ch_neo_uart->lsr);
+
+ /*
+ * If the chip tells us there is no more data pending to
+ * be read, we can then leave.
+ * But before we do, cache the linestatus, just in case.
+ */
+ if (!(linestatus & UART_LSR_DR)) {
+ ch->ch_cached_lsr = linestatus;
+ break;
+ }
+
+ /* No need to store this bit */
+ linestatus &= ~UART_LSR_DR;
+
+ /*
+ * Since we are grabbing the linestatus register, which
+ * will reset some bits after our read, we need to ensure
+ * we don't miss our TX FIFO emptys.
+ */
+ if (linestatus & (UART_LSR_THRE | UART_17158_TX_AND_FIFO_CLR)) {
+ linestatus &= ~(UART_LSR_THRE | UART_17158_TX_AND_FIFO_CLR);
+ ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
+ }
+
+ /*
+ * Discard character if we are ignoring the error mask.
+ */
+ if (linestatus & error_mask) {
+ u8 discard;
+ linestatus = 0;
+ memcpy_fromio(&discard, &ch->ch_neo_uart->txrxburst, 1);
+ continue;
+ }
+
+ /*
+ * If our queue is full, we have no choice but to drop some data.
+ * The assumption is that HWFLOW or SWFLOW should have stopped
+ * things way way before we got to this point.
+ *
+ * I decided that I wanted to ditch the oldest data first,
+ * I hope thats okay with everyone? Yes? Good.
+ */
+ while (qleft < 1) {
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
+ "Queue full, dropping DATA:%x LSR:%x\n",
+ ch->ch_rqueue[tail], ch->ch_equeue[tail]);
+
+ ch->ch_r_tail = tail = (tail + 1) & RQUEUEMASK;
+ ch->ch_err_overrun++;
+ qleft++;
+ }
+
+ memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, 1);
+ ch->ch_equeue[head] = (u8) linestatus;
+
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
+ "DATA/LSR pair: %x %x\n", ch->ch_rqueue[head], ch->ch_equeue[head]);
+
+ /* Ditch any remaining linestatus value. */
+ linestatus = 0;
+
+ /* Add to and flip head if needed */
+ head = (head + 1) & RQUEUEMASK;
+
+ qleft--;
+ ch->ch_rxcount++;
+ }
+
+ /*
+ * Write new final heads to channel structure.
+ */
+ ch->ch_r_head = head & RQUEUEMASK;
+ ch->ch_e_head = head & EQUEUEMASK;
+ jsm_input(ch);
+}
+
+static void neo_copy_data_from_queue_to_uart(struct jsm_channel *ch)
+{
+ u16 head;
+ u16 tail;
+ int n;
+ int s;
+ int qlen;
+ u32 len_written = 0;
+
+ if (!ch)
+ return;
+
+ /* No data to write to the UART */
+ if (ch->ch_w_tail == ch->ch_w_head)
+ return;
+
+ /* If port is "stopped", don't send any data to the UART */
+ if ((ch->ch_flags & CH_STOP) || (ch->ch_flags & CH_BREAK_SENDING))
+ return;
+ /*
+ * If FIFOs are disabled. Send data directly to txrx register
+ */
+ if (!(ch->ch_flags & CH_FIFO_ENABLED)) {
+ u8 lsrbits = readb(&ch->ch_neo_uart->lsr);
+
+ ch->ch_cached_lsr |= lsrbits;
+ if (ch->ch_cached_lsr & UART_LSR_THRE) {
+ ch->ch_cached_lsr &= ~(UART_LSR_THRE);
+
+ writeb(ch->ch_wqueue[ch->ch_w_tail], &ch->ch_neo_uart->txrx);
+ jsm_printk(WRITE, INFO, &ch->ch_bd->pci_dev,
+ "Tx data: %x\n", ch->ch_wqueue[ch->ch_w_head]);
+ ch->ch_w_tail++;
+ ch->ch_w_tail &= WQUEUEMASK;
+ ch->ch_txcount++;
+ }
+ return;
+ }
+
+ /*
+ * We have to do it this way, because of the EXAR TXFIFO count bug.
+ */
+ if (!(ch->ch_flags & (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM)))
+ return;
+
+ len_written = 0;
+ n = UART_17158_TX_FIFOSIZE - ch->ch_t_tlevel;
+
+ /* cache head and tail of queue */
+ head = ch->ch_w_head & WQUEUEMASK;
+ tail = ch->ch_w_tail & WQUEUEMASK;
+ qlen = (head - tail) & WQUEUEMASK;
+
+ /* Find minimum of the FIFO space, versus queue length */
+ n = min(n, qlen);
+
+ while (n > 0) {
+
+ s = ((head >= tail) ? head : WQUEUESIZE) - tail;
+ s = min(s, n);
+
+ if (s <= 0)
+ break;
+
+ memcpy_toio(&ch->ch_neo_uart->txrxburst, ch->ch_wqueue + tail, s);
+ /* Add and flip queue if needed */
+ tail = (tail + s) & WQUEUEMASK;
+ n -= s;
+ ch->ch_txcount += s;
+ len_written += s;
+ }
+
+ /* Update the final tail */
+ ch->ch_w_tail = tail & WQUEUEMASK;
+
+ if (len_written >= ch->ch_t_tlevel)
+ ch->ch_flags &= ~(CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
+
+ if (!jsm_tty_write(&ch->uart_port))
+ uart_write_wakeup(&ch->uart_port);
+}
+
+static void neo_parse_modem(struct jsm_channel *ch, u8 signals)
+{
+ u8 msignals = signals;
+
+ jsm_printk(MSIGS, INFO, &ch->ch_bd->pci_dev,
+ "neo_parse_modem: port: %d msignals: %x\n", ch->ch_portnum, msignals);
+
+ if (!ch)
+ return;
+
+ /* Scrub off lower bits. They signify delta's, which I don't care about */
+ msignals &= 0xf0;
+
+ if (msignals & UART_MSR_DCD)
+ ch->ch_mistat |= UART_MSR_DCD;
+ else
+ ch->ch_mistat &= ~UART_MSR_DCD;
+
+ if (msignals & UART_MSR_DSR)
+ ch->ch_mistat |= UART_MSR_DSR;
+ else
+ ch->ch_mistat &= ~UART_MSR_DSR;
+
+ if (msignals & UART_MSR_RI)
+ ch->ch_mistat |= UART_MSR_RI;
+ else
+ ch->ch_mistat &= ~UART_MSR_RI;
+
+ if (msignals & UART_MSR_CTS)
+ ch->ch_mistat |= UART_MSR_CTS;
+ else
+ ch->ch_mistat &= ~UART_MSR_CTS;
+
+ jsm_printk(MSIGS, INFO, &ch->ch_bd->pci_dev,
+ "Port: %d DTR: %d RTS: %d CTS: %d DSR: %d " "RI: %d CD: %d\n",
+ ch->ch_portnum,
+ !!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_DTR),
+ !!((ch->ch_mistat | ch->ch_mostat) & UART_MCR_RTS),
+ !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_CTS),
+ !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_DSR),
+ !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_RI),
+ !!((ch->ch_mistat | ch->ch_mostat) & UART_MSR_DCD));
+}
+
+/* Make the UART raise any of the output signals we want up */
+static void neo_assert_modem_signals(struct jsm_channel *ch)
+{
+ u8 out;
+
+ if (!ch)
+ return;
+
+ out = ch->ch_mostat;
+
+ writeb(out, &ch->ch_neo_uart->mcr);
+
+ /* flush write operation */
+ neo_pci_posting_flush(ch->ch_bd);
+}
+
+/*
+ * Flush the WRITE FIFO on the Neo.
+ *
+ * NOTE: Channel lock MUST be held before calling this function!
+ */
+static void neo_flush_uart_write(struct jsm_channel *ch)
+{
+ u8 tmp = 0;
+ int i = 0;
+
+ if (!ch)
+ return;
+
+ writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_XMIT), &ch->ch_neo_uart->isr_fcr);
+
+ for (i = 0; i < 10; i++) {
+
+ /* Check to see if the UART feels it completely flushed the FIFO. */
+ tmp = readb(&ch->ch_neo_uart->isr_fcr);
+ if (tmp & 4) {
+ jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev,
+ "Still flushing TX UART... i: %d\n", i);
+ udelay(10);
+ }
+ else
+ break;
+ }
+
+ ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
+}
+
+
+/*
+ * Flush the READ FIFO on the Neo.
+ *
+ * NOTE: Channel lock MUST be held before calling this function!
+ */
+static void neo_flush_uart_read(struct jsm_channel *ch)
+{
+ u8 tmp = 0;
+ int i = 0;
+
+ if (!ch)
+ return;
+
+ writeb((UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR), &ch->ch_neo_uart->isr_fcr);
+
+ for (i = 0; i < 10; i++) {
+
+ /* Check to see if the UART feels it completely flushed the FIFO. */
+ tmp = readb(&ch->ch_neo_uart->isr_fcr);
+ if (tmp & 2) {
+ jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev,
+ "Still flushing RX UART... i: %d\n", i);
+ udelay(10);
+ }
+ else
+ break;
+ }
+}
+
+/*
+ * No locks are assumed to be held when calling this function.
+ */
+void neo_clear_break(struct jsm_channel *ch, int force)
+{
+ unsigned long lock_flags;
+
+ spin_lock_irqsave(&ch->ch_lock, lock_flags);
+
+ /* Turn break off, and unset some variables */
+ if (ch->ch_flags & CH_BREAK_SENDING) {
+ u8 temp = readb(&ch->ch_neo_uart->lcr);
+ writeb((temp & ~UART_LCR_SBC), &ch->ch_neo_uart->lcr);
+
+ ch->ch_flags &= ~(CH_BREAK_SENDING);
+ jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev,
+ "clear break Finishing UART_LCR_SBC! finished: %lx\n", jiffies);
+
+ /* flush write operation */
+ neo_pci_posting_flush(ch->ch_bd);
+ }
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+}
+
+/*
+ * Parse the ISR register.
+ */
+static inline void neo_parse_isr(struct jsm_board *brd, u32 port)
+{
+ struct jsm_channel *ch;
+ u8 isr;
+ u8 cause;
+ unsigned long lock_flags;
+
+ if (!brd)
+ return;
+
+ if (port > brd->maxports)
+ return;
+
+ ch = brd->channels[port];
+ if (!ch)
+ return;
+
+ /* Here we try to figure out what caused the interrupt to happen */
+ while (1) {
+
+ isr = readb(&ch->ch_neo_uart->isr_fcr);
+
+ /* Bail if no pending interrupt */
+ if (isr & UART_IIR_NO_INT)
+ break;
+
+ /*
+ * Yank off the upper 2 bits, which just show that the FIFO's are enabled.
+ */
+ isr &= ~(UART_17158_IIR_FIFO_ENABLED);
+
+ jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev,
+ "%s:%d isr: %x\n", __FILE__, __LINE__, isr);
+
+ if (isr & (UART_17158_IIR_RDI_TIMEOUT | UART_IIR_RDI)) {
+ /* Read data from uart -> queue */
+ neo_copy_data_from_uart_to_queue(ch);
+
+ /* Call our tty layer to enforce queue flow control if needed. */
+ spin_lock_irqsave(&ch->ch_lock, lock_flags);
+ jsm_check_queue_flow_control(ch);
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+ }
+
+ if (isr & UART_IIR_THRI) {
+ /* Transfer data (if any) from Write Queue -> UART. */
+ spin_lock_irqsave(&ch->ch_lock, lock_flags);
+ ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+ neo_copy_data_from_queue_to_uart(ch);
+ }
+
+ if (isr & UART_17158_IIR_XONXOFF) {
+ cause = readb(&ch->ch_neo_uart->xoffchar1);
+
+ jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev,
+ "Port %d. Got ISR_XONXOFF: cause:%x\n", port, cause);
+
+ /*
+ * Since the UART detected either an XON or
+ * XOFF match, we need to figure out which
+ * one it was, so we can suspend or resume data flow.
+ */
+ spin_lock_irqsave(&ch->ch_lock, lock_flags);
+ if (cause == UART_17158_XON_DETECT) {
+ /* Is output stopped right now, if so, resume it */
+ if (brd->channels[port]->ch_flags & CH_STOP) {
+ ch->ch_flags &= ~(CH_STOP);
+ }
+ jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev,
+ "Port %d. XON detected in incoming data\n", port);
+ }
+ else if (cause == UART_17158_XOFF_DETECT) {
+ if (!(brd->channels[port]->ch_flags & CH_STOP)) {
+ ch->ch_flags |= CH_STOP;
+ jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev,
+ "Setting CH_STOP\n");
+ }
+ jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev,
+ "Port: %d. XOFF detected in incoming data\n", port);
+ }
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+ }
+
+ if (isr & UART_17158_IIR_HWFLOW_STATE_CHANGE) {
+ /*
+ * If we get here, this means the hardware is doing auto flow control.
+ * Check to see whether RTS/DTR or CTS/DSR caused this interrupt.
+ */
+ cause = readb(&ch->ch_neo_uart->mcr);
+
+ /* Which pin is doing auto flow? RTS or DTR? */
+ spin_lock_irqsave(&ch->ch_lock, lock_flags);
+ if ((cause & 0x4) == 0) {
+ if (cause & UART_MCR_RTS)
+ ch->ch_mostat |= UART_MCR_RTS;
+ else
+ ch->ch_mostat &= ~(UART_MCR_RTS);
+ } else {
+ if (cause & UART_MCR_DTR)
+ ch->ch_mostat |= UART_MCR_DTR;
+ else
+ ch->ch_mostat &= ~(UART_MCR_DTR);
+ }
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+ }
+
+ /* Parse any modem signal changes */
+ jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev,
+ "MOD_STAT: sending to parse_modem_sigs\n");
+ neo_parse_modem(ch, readb(&ch->ch_neo_uart->msr));
+ }
+}
+
+static inline void neo_parse_lsr(struct jsm_board *brd, u32 port)
+{
+ struct jsm_channel *ch;
+ int linestatus;
+ unsigned long lock_flags;
+
+ if (!brd)
+ return;
+
+ if (port > brd->maxports)
+ return;
+
+ ch = brd->channels[port];
+ if (!ch)
+ return;
+
+ linestatus = readb(&ch->ch_neo_uart->lsr);
+
+ jsm_printk(INTR, INFO, &ch->ch_bd->pci_dev,
+ "%s:%d port: %d linestatus: %x\n", __FILE__, __LINE__, port, linestatus);
+
+ ch->ch_cached_lsr |= linestatus;
+
+ if (ch->ch_cached_lsr & UART_LSR_DR) {
+ /* Read data from uart -> queue */
+ neo_copy_data_from_uart_to_queue(ch);
+ spin_lock_irqsave(&ch->ch_lock, lock_flags);
+ jsm_check_queue_flow_control(ch);
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+ }
+
+ /*
+ * This is a special flag. It indicates that at least 1
+ * RX error (parity, framing, or break) has happened.
+ * Mark this in our struct, which will tell me that I have
+ *to do the special RX+LSR read for this FIFO load.
+ */
+ if (linestatus & UART_17158_RX_FIFO_DATA_ERROR)
+ jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev,
+ "%s:%d Port: %d Got an RX error, need to parse LSR\n",
+ __FILE__, __LINE__, port);
+
+ /*
+ * The next 3 tests should *NOT* happen, as the above test
+ * should encapsulate all 3... At least, thats what Exar says.
+ */
+
+ if (linestatus & UART_LSR_PE) {
+ ch->ch_err_parity++;
+ jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev,
+ "%s:%d Port: %d. PAR ERR!\n", __FILE__, __LINE__, port);
+ }
+
+ if (linestatus & UART_LSR_FE) {
+ ch->ch_err_frame++;
+ jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev,
+ "%s:%d Port: %d. FRM ERR!\n", __FILE__, __LINE__, port);
+ }
+
+ if (linestatus & UART_LSR_BI) {
+ ch->ch_err_break++;
+ jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev,
+ "%s:%d Port: %d. BRK INTR!\n", __FILE__, __LINE__, port);
+ }
+
+ if (linestatus & UART_LSR_OE) {
+ /*
+ * Rx Oruns. Exar says that an orun will NOT corrupt
+ * the FIFO. It will just replace the holding register
+ * with this new data byte. So basically just ignore this.
+ * Probably we should eventually have an orun stat in our driver...
+ */
+ ch->ch_err_overrun++;
+ jsm_printk(INTR, DEBUG, &ch->ch_bd->pci_dev,
+ "%s:%d Port: %d. Rx Overrun!\n", __FILE__, __LINE__, port);
+ }
+
+ if (linestatus & UART_LSR_THRE) {
+ spin_lock_irqsave(&ch->ch_lock, lock_flags);
+ ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+
+ /* Transfer data (if any) from Write Queue -> UART. */
+ neo_copy_data_from_queue_to_uart(ch);
+ }
+ else if (linestatus & UART_17158_TX_AND_FIFO_CLR) {
+ spin_lock_irqsave(&ch->ch_lock, lock_flags);
+ ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+
+ /* Transfer data (if any) from Write Queue -> UART. */
+ neo_copy_data_from_queue_to_uart(ch);
+ }
+}
+
+/*
+ * neo_param()
+ * Send any/all changes to the line to the UART.
+ */
+static void neo_param(struct jsm_channel *ch)
+{
+ u8 lcr = 0;
+ u8 uart_lcr = 0;
+ u8 ier = 0;
+ u32 baud = 9600;
+ int quot = 0;
+ struct jsm_board *bd;
+
+ bd = ch->ch_bd;
+ if (!bd)
+ return;
+
+ /*
+ * If baud rate is zero, flush queues, and set mval to drop DTR.
+ */
+ if ((ch->ch_c_cflag & (CBAUD)) == 0) {
+ ch->ch_r_head = ch->ch_r_tail = 0;
+ ch->ch_e_head = ch->ch_e_tail = 0;
+ ch->ch_w_head = ch->ch_w_tail = 0;
+
+ neo_flush_uart_write(ch);
+ neo_flush_uart_read(ch);
+
+ ch->ch_flags |= (CH_BAUD0);
+ ch->ch_mostat &= ~(UART_MCR_RTS | UART_MCR_DTR);
+ neo_assert_modem_signals(ch);
+ ch->ch_old_baud = 0;
+ return;
+
+ } else if (ch->ch_custom_speed) {
+ baud = ch->ch_custom_speed;
+ if (ch->ch_flags & CH_BAUD0)
+ ch->ch_flags &= ~(CH_BAUD0);
+ } else {
+ int iindex = 0;
+ int jindex = 0;
+
+ const u64 bauds[4][16] = {
+ {
+ 0, 50, 75, 110,
+ 134, 150, 200, 300,
+ 600, 1200, 1800, 2400,
+ 4800, 9600, 19200, 38400 },
+ {
+ 0, 57600, 115200, 230400,
+ 460800, 150, 200, 921600,
+ 600, 1200, 1800, 2400,
+ 4800, 9600, 19200, 38400 },
+ {
+ 0, 57600, 76800, 115200,
+ 131657, 153600, 230400, 460800,
+ 921600, 1200, 1800, 2400,
+ 4800, 9600, 19200, 38400 },
+ {
+ 0, 57600, 115200, 230400,
+ 460800, 150, 200, 921600,
+ 600, 1200, 1800, 2400,
+ 4800, 9600, 19200, 38400 }
+ };
+
+ baud = C_BAUD(ch->uart_port.info->tty) & 0xff;
+
+ if (ch->ch_c_cflag & CBAUDEX)
+ iindex = 1;
+
+ jindex = baud;
+
+ if ((iindex >= 0) && (iindex < 4) && (jindex >= 0) && (jindex < 16))
+ baud = bauds[iindex][jindex];
+ else {
+ jsm_printk(IOCTL, DEBUG, &ch->ch_bd->pci_dev,
+ "baud indices were out of range (%d)(%d)",
+ iindex, jindex);
+ baud = 0;
+ }
+
+ if (baud == 0)
+ baud = 9600;
+
+ if (ch->ch_flags & CH_BAUD0)
+ ch->ch_flags &= ~(CH_BAUD0);
+ }
+
+ if (ch->ch_c_cflag & PARENB)
+ lcr |= UART_LCR_PARITY;
+
+ if (!(ch->ch_c_cflag & PARODD))
+ lcr |= UART_LCR_EPAR;
+
+ /*
+ * Not all platforms support mark/space parity,
+ * so this will hide behind an ifdef.
+ */
+#ifdef CMSPAR
+ if (ch->ch_c_cflag & CMSPAR)
+ lcr |= UART_LCR_SPAR;
+#endif
+
+ if (ch->ch_c_cflag & CSTOPB)
+ lcr |= UART_LCR_STOP;
+
+ switch (ch->ch_c_cflag & CSIZE) {
+ case CS5:
+ lcr |= UART_LCR_WLEN5;
+ break;
+ case CS6:
+ lcr |= UART_LCR_WLEN6;
+ break;
+ case CS7:
+ lcr |= UART_LCR_WLEN7;
+ break;
+ case CS8:
+ default:
+ lcr |= UART_LCR_WLEN8;
+ break;
+ }
+
+ ier = readb(&ch->ch_neo_uart->ier);
+ uart_lcr = readb(&ch->ch_neo_uart->lcr);
+
+ if (baud == 0)
+ baud = 9600;
+
+ quot = ch->ch_bd->bd_dividend / baud;
+
+ if (quot != 0) {
+ ch->ch_old_baud = baud;
+ writeb(UART_LCR_DLAB, &ch->ch_neo_uart->lcr);
+ writeb((quot & 0xff), &ch->ch_neo_uart->txrx);
+ writeb((quot >> 8), &ch->ch_neo_uart->ier);
+ writeb(lcr, &ch->ch_neo_uart->lcr);
+ }
+
+ if (uart_lcr != lcr)
+ writeb(lcr, &ch->ch_neo_uart->lcr);
+
+ if (ch->ch_c_cflag & CREAD)
+ ier |= (UART_IER_RDI | UART_IER_RLSI);
+
+ ier |= (UART_IER_THRI | UART_IER_MSI);
+
+ writeb(ier, &ch->ch_neo_uart->ier);
+
+ /* Set new start/stop chars */
+ neo_set_new_start_stop_chars(ch);
+
+ if (ch->ch_c_cflag & CRTSCTS)
+ neo_set_cts_flow_control(ch);
+ else if (ch->ch_c_iflag & IXON) {
+ /* If start/stop is set to disable, then we should disable flow control */
+ if ((ch->ch_startc == __DISABLED_CHAR) || (ch->ch_stopc == __DISABLED_CHAR))
+ neo_set_no_output_flow_control(ch);
+ else
+ neo_set_ixon_flow_control(ch);
+ }
+ else
+ neo_set_no_output_flow_control(ch);
+
+ if (ch->ch_c_cflag & CRTSCTS)
+ neo_set_rts_flow_control(ch);
+ else if (ch->ch_c_iflag & IXOFF) {
+ /* If start/stop is set to disable, then we should disable flow control */
+ if ((ch->ch_startc == __DISABLED_CHAR) || (ch->ch_stopc == __DISABLED_CHAR))
+ neo_set_no_input_flow_control(ch);
+ else
+ neo_set_ixoff_flow_control(ch);
+ }
+ else
+ neo_set_no_input_flow_control(ch);
+ /*
+ * Adjust the RX FIFO Trigger level if baud is less than 9600.
+ * Not exactly elegant, but this is needed because of the Exar chip's
+ * delay on firing off the RX FIFO interrupt on slower baud rates.
+ */
+ if (baud < 9600) {
+ writeb(1, &ch->ch_neo_uart->rfifo);
+ ch->ch_r_tlevel = 1;
+ }
+
+ neo_assert_modem_signals(ch);
+
+ /* Get current status of the modem signals now */
+ neo_parse_modem(ch, readb(&ch->ch_neo_uart->msr));
+ return;
+}
+
+/*
+ * jsm_neo_intr()
+ *
+ * Neo specific interrupt handler.
+ */
+static irqreturn_t neo_intr(int irq, void *voidbrd, struct pt_regs *regs)
+{
+ struct jsm_board *brd = (struct jsm_board *) voidbrd;
+ struct jsm_channel *ch;
+ int port = 0;
+ int type = 0;
+ int current_port;
+ u32 tmp;
+ u32 uart_poll;
+ unsigned long lock_flags;
+ unsigned long lock_flags2;
+ int outofloop_count = 0;
+
+ brd->intr_count++;
+
+ /* Lock out the slow poller from running on this board. */
+ spin_lock_irqsave(&brd->bd_intr_lock, lock_flags);
+
+ /*
+ * Read in "extended" IRQ information from the 32bit Neo register.
+ * Bits 0-7: What port triggered the interrupt.
+ * Bits 8-31: Each 3bits indicate what type of interrupt occurred.
+ */
+ uart_poll = readl(brd->re_map_membase + UART_17158_POLL_ADDR_OFFSET);
+
+ jsm_printk(INTR, INFO, &brd->pci_dev,
+ "%s:%d uart_poll: %x\n", __FILE__, __LINE__, uart_poll);
+
+ if (!uart_poll) {
+ jsm_printk(INTR, INFO, &brd->pci_dev,
+ "Kernel interrupted to me, but no pending interrupts...\n");
+ spin_unlock_irqrestore(&brd->bd_intr_lock, lock_flags);
+ return IRQ_NONE;
+ }
+
+ /* At this point, we have at least SOMETHING to service, dig further... */
+
+ current_port = 0;
+
+ /* Loop on each port */
+ while (((uart_poll & 0xff) != 0) && (outofloop_count < 0xff)){
+
+ tmp = uart_poll;
+ outofloop_count++;
+
+ /* Check current port to see if it has interrupt pending */
+ if ((tmp & jsm_offset_table[current_port]) != 0) {
+ port = current_port;
+ type = tmp >> (8 + (port * 3));
+ type &= 0x7;
+ } else {
+ current_port++;
+ continue;
+ }
+
+ jsm_printk(INTR, INFO, &brd->pci_dev,
+ "%s:%d port: %x type: %x\n", __FILE__, __LINE__, port, type);
+
+ /* Remove this port + type from uart_poll */
+ uart_poll &= ~(jsm_offset_table[port]);
+
+ if (!type) {
+ /* If no type, just ignore it, and move onto next port */
+ jsm_printk(INTR, ERR, &brd->pci_dev,
+ "Interrupt with no type! port: %d\n", port);
+ continue;
+ }
+
+ /* Switch on type of interrupt we have */
+ switch (type) {
+
+ case UART_17158_RXRDY_TIMEOUT:
+ /*
+ * RXRDY Time-out is cleared by reading data in the
+ * RX FIFO until it falls below the trigger level.
+ */
+
+ /* Verify the port is in range. */
+ if (port > brd->nasync)
+ continue;
+
+ ch = brd->channels[port];
+ neo_copy_data_from_uart_to_queue(ch);
+
+ /* Call our tty layer to enforce queue flow control if needed. */
+ spin_lock_irqsave(&ch->ch_lock, lock_flags2);
+ jsm_check_queue_flow_control(ch);
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags2);
+
+ continue;
+
+ case UART_17158_RX_LINE_STATUS:
+ /*
+ * RXRDY and RX LINE Status (logic OR of LSR[4:1])
+ */
+ neo_parse_lsr(brd, port);
+ continue;
+
+ case UART_17158_TXRDY:
+ /*
+ * TXRDY interrupt clears after reading ISR register for the UART channel.
+ */
+
+ /*
+ * Yes, this is odd...
+ * Why would I check EVERY possibility of type of
+ * interrupt, when we know its TXRDY???
+ * Becuz for some reason, even tho we got triggered for TXRDY,
+ * it seems to be occassionally wrong. Instead of TX, which
+ * it should be, I was getting things like RXDY too. Weird.
+ */
+ neo_parse_isr(brd, port);
+ continue;
+
+ case UART_17158_MSR:
+ /*
+ * MSR or flow control was seen.
+ */
+ neo_parse_isr(brd, port);
+ continue;
+
+ default:
+ /*
+ * The UART triggered us with a bogus interrupt type.
+ * It appears the Exar chip, when REALLY bogged down, will throw
+ * these once and awhile.
+ * Its harmless, just ignore it and move on.
+ */
+ jsm_printk(INTR, ERR, &brd->pci_dev,
+ "%s:%d Unknown Interrupt type: %x\n", __FILE__, __LINE__, type);
+ continue;
+ }
+ }
+
+ spin_unlock_irqrestore(&brd->bd_intr_lock, lock_flags);
+
+ jsm_printk(INTR, INFO, &brd->pci_dev, "finish.\n");
+ return IRQ_HANDLED;
+}
+
+/*
+ * Neo specific way of turning off the receiver.
+ * Used as a way to enforce queue flow control when in
+ * hardware flow control mode.
+ */
+static void neo_disable_receiver(struct jsm_channel *ch)
+{
+ u8 tmp = readb(&ch->ch_neo_uart->ier);
+ tmp &= ~(UART_IER_RDI);
+ writeb(tmp, &ch->ch_neo_uart->ier);
+
+ /* flush write operation */
+ neo_pci_posting_flush(ch->ch_bd);
+}
+
+
+/*
+ * Neo specific way of turning on the receiver.
+ * Used as a way to un-enforce queue flow control when in
+ * hardware flow control mode.
+ */
+static void neo_enable_receiver(struct jsm_channel *ch)
+{
+ u8 tmp = readb(&ch->ch_neo_uart->ier);
+ tmp |= (UART_IER_RDI);
+ writeb(tmp, &ch->ch_neo_uart->ier);
+
+ /* flush write operation */
+ neo_pci_posting_flush(ch->ch_bd);
+}
+
+static void neo_send_start_character(struct jsm_channel *ch)
+{
+ if (!ch)
+ return;
+
+ if (ch->ch_startc != __DISABLED_CHAR) {
+ ch->ch_xon_sends++;
+ writeb(ch->ch_startc, &ch->ch_neo_uart->txrx);
+
+ /* flush write operation */
+ neo_pci_posting_flush(ch->ch_bd);
+ }
+}
+
+static void neo_send_stop_character(struct jsm_channel *ch)
+{
+ if (!ch)
+ return;
+
+ if (ch->ch_stopc != __DISABLED_CHAR) {
+ ch->ch_xoff_sends++;
+ writeb(ch->ch_stopc, &ch->ch_neo_uart->txrx);
+
+ /* flush write operation */
+ neo_pci_posting_flush(ch->ch_bd);
+ }
+}
+
+/*
+ * neo_uart_init
+ */
+static void neo_uart_init(struct jsm_channel *ch)
+{
+ writeb(0, &ch->ch_neo_uart->ier);
+ writeb(0, &ch->ch_neo_uart->efr);
+ writeb(UART_EFR_ECB, &ch->ch_neo_uart->efr);
+
+ /* Clear out UART and FIFO */
+ readb(&ch->ch_neo_uart->txrx);
+ writeb((UART_FCR_ENABLE_FIFO|UART_FCR_CLEAR_RCVR|UART_FCR_CLEAR_XMIT), &ch->ch_neo_uart->isr_fcr);
+ readb(&ch->ch_neo_uart->lsr);
+ readb(&ch->ch_neo_uart->msr);
+
+ ch->ch_flags |= CH_FIFO_ENABLED;
+
+ /* Assert any signals we want up */
+ writeb(ch->ch_mostat, &ch->ch_neo_uart->mcr);
+}
+
+/*
+ * Make the UART completely turn off.
+ */
+static void neo_uart_off(struct jsm_channel *ch)
+{
+ /* Turn off UART enhanced bits */
+ writeb(0, &ch->ch_neo_uart->efr);
+
+ /* Stop all interrupts from occurring. */
+ writeb(0, &ch->ch_neo_uart->ier);
+}
+
+static u32 neo_get_uart_bytes_left(struct jsm_channel *ch)
+{
+ u8 left = 0;
+ u8 lsr = readb(&ch->ch_neo_uart->lsr);
+
+ /* We must cache the LSR as some of the bits get reset once read... */
+ ch->ch_cached_lsr |= lsr;
+
+ /* Determine whether the Transmitter is empty or not */
+ if (!(lsr & UART_LSR_TEMT))
+ left = 1;
+ else {
+ ch->ch_flags |= (CH_TX_FIFO_EMPTY | CH_TX_FIFO_LWM);
+ left = 0;
+ }
+
+ return left;
+}
+
+/* Channel lock MUST be held by the calling function! */
+static void neo_send_break(struct jsm_channel *ch)
+{
+ /*
+ * Set the time we should stop sending the break.
+ * If we are already sending a break, toss away the existing
+ * time to stop, and use this new value instead.
+ */
+
+ /* Tell the UART to start sending the break */
+ if (!(ch->ch_flags & CH_BREAK_SENDING)) {
+ u8 temp = readb(&ch->ch_neo_uart->lcr);
+ writeb((temp | UART_LCR_SBC), &ch->ch_neo_uart->lcr);
+ ch->ch_flags |= (CH_BREAK_SENDING);
+
+ /* flush write operation */
+ neo_pci_posting_flush(ch->ch_bd);
+ }
+}
+
+/*
+ * neo_send_immediate_char.
+ *
+ * Sends a specific character as soon as possible to the UART,
+ * jumping over any bytes that might be in the write queue.
+ *
+ * The channel lock MUST be held by the calling function.
+ */
+static void neo_send_immediate_char(struct jsm_channel *ch, unsigned char c)
+{
+ if (!ch)
+ return;
+
+ writeb(c, &ch->ch_neo_uart->txrx);
+
+ /* flush write operation */
+ neo_pci_posting_flush(ch->ch_bd);
+}
+
+struct board_ops jsm_neo_ops = {
+ .intr = neo_intr,
+ .uart_init = neo_uart_init,
+ .uart_off = neo_uart_off,
+ .param = neo_param,
+ .assert_modem_signals = neo_assert_modem_signals,
+ .flush_uart_write = neo_flush_uart_write,
+ .flush_uart_read = neo_flush_uart_read,
+ .disable_receiver = neo_disable_receiver,
+ .enable_receiver = neo_enable_receiver,
+ .send_break = neo_send_break,
+ .clear_break = neo_clear_break,
+ .send_start_character = neo_send_start_character,
+ .send_stop_character = neo_send_stop_character,
+ .copy_data_from_queue_to_uart = neo_copy_data_from_queue_to_uart,
+ .get_uart_bytes_left = neo_get_uart_bytes_left,
+ .send_immediate_char = neo_send_immediate_char
+};
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
new file mode 100644
index 00000000000..7fb7cc07074
--- /dev/null
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -0,0 +1,1038 @@
+/************************************************************************
+ * Copyright 2003 Digi International (www.digi.com)
+ *
+ * Copyright (C) 2004 IBM Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the
+ * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ * PURPOSE. See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 * Temple Place - Suite 330, Boston,
+ * MA 02111-1307, USA.
+ *
+ * Contact Information:
+ * Scott H Kilau <Scott_Kilau@digi.com>
+ * Wendy Xiong <wendyx@us.ltcfwd.linux.ibm.com>
+ *
+ ***********************************************************************/
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_reg.h>
+#include <linux/delay.h> /* For udelay */
+#include <linux/pci.h>
+
+#include "jsm.h"
+
+static inline int jsm_get_mstat(struct jsm_channel *ch)
+{
+ unsigned char mstat;
+ unsigned result;
+
+ jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "start\n");
+
+ mstat = (ch->ch_mostat | ch->ch_mistat);
+
+ result = 0;
+
+ if (mstat & UART_MCR_DTR)
+ result |= TIOCM_DTR;
+ if (mstat & UART_MCR_RTS)
+ result |= TIOCM_RTS;
+ if (mstat & UART_MSR_CTS)
+ result |= TIOCM_CTS;
+ if (mstat & UART_MSR_DSR)
+ result |= TIOCM_DSR;
+ if (mstat & UART_MSR_RI)
+ result |= TIOCM_RI;
+ if (mstat & UART_MSR_DCD)
+ result |= TIOCM_CD;
+
+ jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "finish\n");
+ return result;
+}
+
+static unsigned int jsm_tty_tx_empty(struct uart_port *port)
+{
+ return TIOCSER_TEMT;
+}
+
+/*
+ * Return modem signals to ld.
+ */
+static unsigned int jsm_tty_get_mctrl(struct uart_port *port)
+{
+ int result;
+ struct jsm_channel *channel = (struct jsm_channel *)port;
+
+ jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n");
+
+ result = jsm_get_mstat(channel);
+
+ if (result < 0)
+ return -ENXIO;
+
+ jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n");
+
+ return result;
+}
+
+/*
+ * jsm_set_modem_info()
+ *
+ * Set modem signals, called by ld.
+ */
+static void jsm_tty_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct jsm_channel *channel = (struct jsm_channel *)port;
+
+ jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n");
+
+ if (mctrl & TIOCM_RTS)
+ channel->ch_mostat |= UART_MCR_RTS;
+ else
+ channel->ch_mostat &= ~UART_MCR_RTS;
+
+ if (mctrl & TIOCM_DTR)
+ channel->ch_mostat |= UART_MCR_DTR;
+ else
+ channel->ch_mostat &= ~UART_MCR_DTR;
+
+ channel->ch_bd->bd_ops->assert_modem_signals(channel);
+
+ jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n");
+ udelay(10);
+}
+
+static void jsm_tty_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+ struct jsm_channel *channel = (struct jsm_channel *)port;
+
+ jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n");
+
+ channel->ch_flags &= ~(CH_STOP);
+ jsm_tty_write(port);
+
+ jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n");
+}
+
+static void jsm_tty_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ struct jsm_channel *channel = (struct jsm_channel *)port;
+
+ jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "start\n");
+
+ channel->ch_flags |= (CH_STOP);
+
+ jsm_printk(IOCTL, INFO, &channel->ch_bd->pci_dev, "finish\n");
+}
+
+static void jsm_tty_send_xchar(struct uart_port *port, char ch)
+{
+ unsigned long lock_flags;
+ struct jsm_channel *channel = (struct jsm_channel *)port;
+
+ spin_lock_irqsave(&port->lock, lock_flags);
+ if (ch == port->info->tty->termios->c_cc[VSTART])
+ channel->ch_bd->bd_ops->send_start_character(channel);
+
+ if (ch == port->info->tty->termios->c_cc[VSTOP])
+ channel->ch_bd->bd_ops->send_stop_character(channel);
+ spin_unlock_irqrestore(&port->lock, lock_flags);
+}
+
+static void jsm_tty_stop_rx(struct uart_port *port)
+{
+ struct jsm_channel *channel = (struct jsm_channel *)port;
+
+ channel->ch_bd->bd_ops->disable_receiver(channel);
+}
+
+static void jsm_tty_break(struct uart_port *port, int break_state)
+{
+ unsigned long lock_flags;
+ struct jsm_channel *channel = (struct jsm_channel *)port;
+
+ spin_lock_irqsave(&port->lock, lock_flags);
+ if (break_state == -1)
+ channel->ch_bd->bd_ops->send_break(channel);
+ else
+ channel->ch_bd->bd_ops->clear_break(channel, 0);
+
+ spin_unlock_irqrestore(&port->lock, lock_flags);
+}
+
+static int jsm_tty_open(struct uart_port *port)
+{
+ struct jsm_board *brd;
+ int rc = 0;
+ struct jsm_channel *channel = (struct jsm_channel *)port;
+
+ /* Get board pointer from our array of majors we have allocated */
+ brd = channel->ch_bd;
+
+ /*
+ * Allocate channel buffers for read/write/error.
+ * Set flag, so we don't get trounced on.
+ */
+ channel->ch_flags |= (CH_OPENING);
+
+ /* Drop locks, as malloc with GFP_KERNEL can sleep */
+
+ if (!channel->ch_rqueue) {
+ channel->ch_rqueue = (u8 *) kmalloc(RQUEUESIZE, GFP_KERNEL);
+ if (!channel->ch_rqueue) {
+ jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev,
+ "unable to allocate read queue buf");
+ return -ENOMEM;
+ }
+ memset(channel->ch_rqueue, 0, RQUEUESIZE);
+ }
+ if (!channel->ch_equeue) {
+ channel->ch_equeue = (u8 *) kmalloc(EQUEUESIZE, GFP_KERNEL);
+ if (!channel->ch_equeue) {
+ jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev,
+ "unable to allocate error queue buf");
+ return -ENOMEM;
+ }
+ memset(channel->ch_equeue, 0, EQUEUESIZE);
+ }
+ if (!channel->ch_wqueue) {
+ channel->ch_wqueue = (u8 *) kmalloc(WQUEUESIZE, GFP_KERNEL);
+ if (!channel->ch_wqueue) {
+ jsm_printk(INIT, ERR, &channel->ch_bd->pci_dev,
+ "unable to allocate write queue buf");
+ return -ENOMEM;
+ }
+ memset(channel->ch_wqueue, 0, WQUEUESIZE);
+ }
+
+ channel->ch_flags &= ~(CH_OPENING);
+ /*
+ * Initialize if neither terminal is open.
+ */
+ jsm_printk(OPEN, INFO, &channel->ch_bd->pci_dev,
+ "jsm_open: initializing channel in open...\n");
+
+ /*
+ * Flush input queues.
+ */
+ channel->ch_r_head = channel->ch_r_tail = 0;
+ channel->ch_e_head = channel->ch_e_tail = 0;
+ channel->ch_w_head = channel->ch_w_tail = 0;
+
+ brd->bd_ops->flush_uart_write(channel);
+ brd->bd_ops->flush_uart_read(channel);
+
+ channel->ch_flags = 0;
+ channel->ch_cached_lsr = 0;
+ channel->ch_stops_sent = 0;
+
+ channel->ch_c_cflag = port->info->tty->termios->c_cflag;
+ channel->ch_c_iflag = port->info->tty->termios->c_iflag;
+ channel->ch_c_oflag = port->info->tty->termios->c_oflag;
+ channel->ch_c_lflag = port->info->tty->termios->c_lflag;
+ channel->ch_startc = port->info->tty->termios->c_cc[VSTART];
+ channel->ch_stopc = port->info->tty->termios->c_cc[VSTOP];
+
+ /* Tell UART to init itself */
+ brd->bd_ops->uart_init(channel);
+
+ /*
+ * Run param in case we changed anything
+ */
+ brd->bd_ops->param(channel);
+
+ jsm_carrier(channel);
+
+ channel->ch_open_count++;
+
+ jsm_printk(OPEN, INFO, &channel->ch_bd->pci_dev, "finish\n");
+ return rc;
+}
+
+static void jsm_tty_close(struct uart_port *port)
+{
+ struct jsm_board *bd;
+ struct termios *ts;
+ struct jsm_channel *channel = (struct jsm_channel *)port;
+
+ jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "start\n");
+
+ bd = channel->ch_bd;
+ ts = channel->uart_port.info->tty->termios;
+
+ channel->ch_flags &= ~(CH_STOPI);
+
+ channel->ch_open_count--;
+
+ /*
+ * If we have HUPCL set, lower DTR and RTS
+ */
+ if (channel->ch_c_cflag & HUPCL) {
+ jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev,
+ "Close. HUPCL set, dropping DTR/RTS\n");
+
+ /* Drop RTS/DTR */
+ channel->ch_mostat &= ~(UART_MCR_DTR | UART_MCR_RTS);
+ bd->bd_ops->assert_modem_signals(channel);
+ }
+
+ channel->ch_old_baud = 0;
+
+ /* Turn off UART interrupts for this port */
+ channel->ch_bd->bd_ops->uart_off(channel);
+
+ jsm_printk(CLOSE, INFO, &channel->ch_bd->pci_dev, "finish\n");
+}
+
+static void jsm_tty_set_termios(struct uart_port *port,
+ struct termios *termios,
+ struct termios *old_termios)
+{
+ unsigned long lock_flags;
+ struct jsm_channel *channel = (struct jsm_channel *)port;
+
+ spin_lock_irqsave(&port->lock, lock_flags);
+ channel->ch_c_cflag = termios->c_cflag;
+ channel->ch_c_iflag = termios->c_iflag;
+ channel->ch_c_oflag = termios->c_oflag;
+ channel->ch_c_lflag = termios->c_lflag;
+ channel->ch_startc = termios->c_cc[VSTART];
+ channel->ch_stopc = termios->c_cc[VSTOP];
+
+ channel->ch_bd->bd_ops->param(channel);
+ jsm_carrier(channel);
+ spin_unlock_irqrestore(&port->lock, lock_flags);
+}
+
+static const char *jsm_tty_type(struct uart_port *port)
+{
+ return "jsm";
+}
+
+static void jsm_tty_release_port(struct uart_port *port)
+{
+}
+
+static int jsm_tty_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+static void jsm_config_port(struct uart_port *port, int flags)
+{
+ port->type = PORT_JSM;
+}
+
+static struct uart_ops jsm_ops = {
+ .tx_empty = jsm_tty_tx_empty,
+ .set_mctrl = jsm_tty_set_mctrl,
+ .get_mctrl = jsm_tty_get_mctrl,
+ .stop_tx = jsm_tty_stop_tx,
+ .start_tx = jsm_tty_start_tx,
+ .send_xchar = jsm_tty_send_xchar,
+ .stop_rx = jsm_tty_stop_rx,
+ .break_ctl = jsm_tty_break,
+ .startup = jsm_tty_open,
+ .shutdown = jsm_tty_close,
+ .set_termios = jsm_tty_set_termios,
+ .type = jsm_tty_type,
+ .release_port = jsm_tty_release_port,
+ .request_port = jsm_tty_request_port,
+ .config_port = jsm_config_port,
+};
+
+/*
+ * jsm_tty_init()
+ *
+ * Init the tty subsystem. Called once per board after board has been
+ * downloaded and init'ed.
+ */
+int jsm_tty_init(struct jsm_board *brd)
+{
+ int i;
+ void __iomem *vaddr;
+ struct jsm_channel *ch;
+
+ if (!brd)
+ return -ENXIO;
+
+ jsm_printk(INIT, INFO, &brd->pci_dev, "start\n");
+
+ /*
+ * Initialize board structure elements.
+ */
+
+ brd->nasync = brd->maxports;
+
+ /*
+ * Allocate channel memory that might not have been allocated
+ * when the driver was first loaded.
+ */
+ for (i = 0; i < brd->nasync; i++) {
+ if (!brd->channels[i]) {
+
+ /*
+ * Okay to malloc with GFP_KERNEL, we are not at
+ * interrupt context, and there are no locks held.
+ */
+ brd->channels[i] = kmalloc(sizeof(struct jsm_channel), GFP_KERNEL);
+ if (!brd->channels[i]) {
+ jsm_printk(CORE, ERR, &brd->pci_dev,
+ "%s:%d Unable to allocate memory for channel struct\n",
+ __FILE__, __LINE__);
+ }
+ memset(brd->channels[i], 0, sizeof(struct jsm_channel));
+ }
+ }
+
+ ch = brd->channels[0];
+ vaddr = brd->re_map_membase;
+
+ /* Set up channel variables */
+ for (i = 0; i < brd->nasync; i++, ch = brd->channels[i]) {
+
+ if (!brd->channels[i])
+ continue;
+
+ spin_lock_init(&ch->ch_lock);
+
+ if (brd->bd_uart_offset == 0x200)
+ ch->ch_neo_uart = vaddr + (brd->bd_uart_offset * i);
+
+ ch->ch_bd = brd;
+ ch->ch_portnum = i;
+
+ /* .25 second delay */
+ ch->ch_close_delay = 250;
+
+ init_waitqueue_head(&ch->ch_flags_wait);
+ }
+
+ jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n");
+ return 0;
+}
+
+int jsm_uart_port_init(struct jsm_board *brd)
+{
+ int i;
+ struct jsm_channel *ch;
+
+ if (!brd)
+ return -ENXIO;
+
+ jsm_printk(INIT, INFO, &brd->pci_dev, "start\n");
+
+ /*
+ * Initialize board structure elements.
+ */
+
+ brd->nasync = brd->maxports;
+
+ /* Set up channel variables */
+ for (i = 0; i < brd->nasync; i++, ch = brd->channels[i]) {
+
+ if (!brd->channels[i])
+ continue;
+
+ brd->channels[i]->uart_port.irq = brd->irq;
+ brd->channels[i]->uart_port.type = PORT_JSM;
+ brd->channels[i]->uart_port.iotype = UPIO_MEM;
+ brd->channels[i]->uart_port.membase = brd->re_map_membase;
+ brd->channels[i]->uart_port.fifosize = 16;
+ brd->channels[i]->uart_port.ops = &jsm_ops;
+ brd->channels[i]->uart_port.line = brd->channels[i]->ch_portnum + brd->boardnum * 2;
+ if (uart_add_one_port (&jsm_uart_driver, &brd->channels[i]->uart_port))
+ printk(KERN_INFO "Added device failed\n");
+ else
+ printk(KERN_INFO "Added device \n");
+ }
+
+ jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n");
+ return 0;
+}
+
+int jsm_remove_uart_port(struct jsm_board *brd)
+{
+ int i;
+ struct jsm_channel *ch;
+
+ if (!brd)
+ return -ENXIO;
+
+ jsm_printk(INIT, INFO, &brd->pci_dev, "start\n");
+
+ /*
+ * Initialize board structure elements.
+ */
+
+ brd->nasync = brd->maxports;
+
+ /* Set up channel variables */
+ for (i = 0; i < brd->nasync; i++) {
+
+ if (!brd->channels[i])
+ continue;
+
+ ch = brd->channels[i];
+
+ uart_remove_one_port(&jsm_uart_driver, &brd->channels[i]->uart_port);
+ }
+
+ jsm_printk(INIT, INFO, &brd->pci_dev, "finish\n");
+ return 0;
+}
+
+void jsm_input(struct jsm_channel *ch)
+{
+ struct jsm_board *bd;
+ struct tty_struct *tp;
+ u32 rmask;
+ u16 head;
+ u16 tail;
+ int data_len;
+ unsigned long lock_flags;
+ int flip_len;
+ int len = 0;
+ int n = 0;
+ char *buf = NULL;
+ char *buf2 = NULL;
+ int s = 0;
+ int i = 0;
+
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start\n");
+
+ if (!ch)
+ return;
+
+ tp = ch->uart_port.info->tty;
+
+ bd = ch->ch_bd;
+ if(!bd)
+ return;
+
+ spin_lock_irqsave(&ch->ch_lock, lock_flags);
+
+ /*
+ *Figure the number of characters in the buffer.
+ *Exit immediately if none.
+ */
+
+ rmask = RQUEUEMASK;
+
+ head = ch->ch_r_head & rmask;
+ tail = ch->ch_r_tail & rmask;
+
+ data_len = (head - tail) & rmask;
+ if (data_len == 0) {
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+ return;
+ }
+
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start\n");
+
+ /*
+ *If the device is not open, or CREAD is off, flush
+ *input data and return immediately.
+ */
+ if (!tp ||
+ !(tp->termios->c_cflag & CREAD) ) {
+
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
+ "input. dropping %d bytes on port %d...\n", data_len, ch->ch_portnum);
+ ch->ch_r_head = tail;
+
+ /* Force queue flow control to be released, if needed */
+ jsm_check_queue_flow_control(ch);
+
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+ return;
+ }
+
+ /*
+ * If we are throttled, simply don't read any data.
+ */
+ if (ch->ch_flags & CH_STOPI) {
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
+ "Port %d throttled, not reading any data. head: %x tail: %x\n",
+ ch->ch_portnum, head, tail);
+ return;
+ }
+
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "start 2\n");
+
+ /*
+ * If the rxbuf is empty and we are not throttled, put as much
+ * as we can directly into the linux TTY flip buffer.
+ * The jsm_rawreadok case takes advantage of carnal knowledge that
+ * the char_buf and the flag_buf are next to each other and
+ * are each of (2 * TTY_FLIPBUF_SIZE) size.
+ *
+ * NOTE: if(!tty->real_raw), the call to ldisc.receive_buf
+ *actually still uses the flag buffer, so you can't
+ *use it for input data
+ */
+ if (jsm_rawreadok) {
+ if (tp->real_raw)
+ flip_len = MYFLIPLEN;
+ else
+ flip_len = 2 * TTY_FLIPBUF_SIZE;
+ } else
+ flip_len = TTY_FLIPBUF_SIZE - tp->flip.count;
+
+ len = min(data_len, flip_len);
+ len = min(len, (N_TTY_BUF_SIZE - 1) - tp->read_cnt);
+
+ if (len <= 0) {
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "jsm_input 1\n");
+ return;
+ }
+
+ /*
+ * If we're bypassing flip buffers on rx, we can blast it
+ * right into the beginning of the buffer.
+ */
+ if (jsm_rawreadok) {
+ if (tp->real_raw) {
+ if (ch->ch_flags & CH_FLIPBUF_IN_USE) {
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
+ "JSM - FLIPBUF in use. delaying input\n");
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+ return;
+ }
+ ch->ch_flags |= CH_FLIPBUF_IN_USE;
+ buf = ch->ch_bd->flipbuf;
+ buf2 = NULL;
+ } else {
+ buf = tp->flip.char_buf;
+ buf2 = tp->flip.flag_buf;
+ }
+ } else {
+ buf = tp->flip.char_buf_ptr;
+ buf2 = tp->flip.flag_buf_ptr;
+ }
+
+ n = len;
+
+ /*
+ * n now contains the most amount of data we can copy,
+ * bounded either by the flip buffer size or the amount
+ * of data the card actually has pending...
+ */
+ while (n) {
+ s = ((head >= tail) ? head : RQUEUESIZE) - tail;
+ s = min(s, n);
+
+ if (s <= 0)
+ break;
+
+ memcpy(buf, ch->ch_rqueue + tail, s);
+
+ /* buf2 is only set when port isn't raw */
+ if (buf2)
+ memcpy(buf2, ch->ch_equeue + tail, s);
+
+ tail += s;
+ buf += s;
+ if (buf2)
+ buf2 += s;
+ n -= s;
+ /* Flip queue if needed */
+ tail &= rmask;
+ }
+
+ /*
+ * In high performance mode, we don't have to update
+ * flag_buf or any of the counts or pointers into flip buf.
+ */
+ if (!jsm_rawreadok) {
+ if (I_PARMRK(tp) || I_BRKINT(tp) || I_INPCK(tp)) {
+ for (i = 0; i < len; i++) {
+ /*
+ * Give the Linux ld the flags in the
+ * format it likes.
+ */
+ if (tp->flip.flag_buf_ptr[i] & UART_LSR_BI)
+ tp->flip.flag_buf_ptr[i] = TTY_BREAK;
+ else if (tp->flip.flag_buf_ptr[i] & UART_LSR_PE)
+ tp->flip.flag_buf_ptr[i] = TTY_PARITY;
+ else if (tp->flip.flag_buf_ptr[i] & UART_LSR_FE)
+ tp->flip.flag_buf_ptr[i] = TTY_FRAME;
+ else
+ tp->flip.flag_buf_ptr[i] = TTY_NORMAL;
+ }
+ } else {
+ memset(tp->flip.flag_buf_ptr, 0, len);
+ }
+
+ tp->flip.char_buf_ptr += len;
+ tp->flip.flag_buf_ptr += len;
+ tp->flip.count += len;
+ }
+ else if (!tp->real_raw) {
+ if (I_PARMRK(tp) || I_BRKINT(tp) || I_INPCK(tp)) {
+ for (i = 0; i < len; i++) {
+ /*
+ * Give the Linux ld the flags in the
+ * format it likes.
+ */
+ if (tp->flip.flag_buf_ptr[i] & UART_LSR_BI)
+ tp->flip.flag_buf_ptr[i] = TTY_BREAK;
+ else if (tp->flip.flag_buf_ptr[i] & UART_LSR_PE)
+ tp->flip.flag_buf_ptr[i] = TTY_PARITY;
+ else if (tp->flip.flag_buf_ptr[i] & UART_LSR_FE)
+ tp->flip.flag_buf_ptr[i] = TTY_FRAME;
+ else
+ tp->flip.flag_buf_ptr[i] = TTY_NORMAL;
+ }
+ } else
+ memset(tp->flip.flag_buf, 0, len);
+ }
+
+ /*
+ * If we're doing raw reads, jam it right into the
+ * line disc bypassing the flip buffers.
+ */
+ if (jsm_rawreadok) {
+ if (tp->real_raw) {
+ ch->ch_r_tail = tail & rmask;
+ ch->ch_e_tail = tail & rmask;
+
+ jsm_check_queue_flow_control(ch);
+
+ /* !!! WE *MUST* LET GO OF ALL LOCKS BEFORE CALLING RECEIVE BUF !!! */
+
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
+ "jsm_input. %d real_raw len:%d calling receive_buf for board %d\n",
+ __LINE__, len, ch->ch_bd->boardnum);
+ tp->ldisc.receive_buf(tp, ch->ch_bd->flipbuf, NULL, len);
+
+ /* Allow use of channel flip buffer again */
+ spin_lock_irqsave(&ch->ch_lock, lock_flags);
+ ch->ch_flags &= ~CH_FLIPBUF_IN_USE;
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+
+ } else {
+ ch->ch_r_tail = tail & rmask;
+ ch->ch_e_tail = tail & rmask;
+
+ jsm_check_queue_flow_control(ch);
+
+ /* !!! WE *MUST* LET GO OF ALL LOCKS BEFORE CALLING RECEIVE BUF !!! */
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
+ "jsm_input. %d not real_raw len:%d calling receive_buf for board %d\n",
+ __LINE__, len, ch->ch_bd->boardnum);
+
+ tp->ldisc.receive_buf(tp, tp->flip.char_buf, tp->flip.flag_buf, len);
+ }
+ } else {
+ ch->ch_r_tail = tail & rmask;
+ ch->ch_e_tail = tail & rmask;
+
+ jsm_check_queue_flow_control(ch);
+
+ spin_unlock_irqrestore(&ch->ch_lock, lock_flags);
+
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
+ "jsm_input. %d not jsm_read raw okay scheduling flip\n", __LINE__);
+ tty_schedule_flip(tp);
+ }
+
+ jsm_printk(IOCTL, INFO, &ch->ch_bd->pci_dev, "finish\n");
+}
+
+void jsm_carrier(struct jsm_channel *ch)
+{
+ struct jsm_board *bd;
+
+ int virt_carrier = 0;
+ int phys_carrier = 0;
+
+ jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev, "start\n");
+ if (!ch)
+ return;
+
+ bd = ch->ch_bd;
+
+ if (!bd)
+ return;
+
+ if (ch->ch_mistat & UART_MSR_DCD) {
+ jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev,
+ "mistat: %x D_CD: %x\n", ch->ch_mistat, ch->ch_mistat & UART_MSR_DCD);
+ phys_carrier = 1;
+ }
+
+ if (ch->ch_c_cflag & CLOCAL)
+ virt_carrier = 1;
+
+ jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev,
+ "DCD: physical: %d virt: %d\n", phys_carrier, virt_carrier);
+
+ /*
+ * Test for a VIRTUAL carrier transition to HIGH.
+ */
+ if (((ch->ch_flags & CH_FCAR) == 0) && (virt_carrier == 1)) {
+
+ /*
+ * When carrier rises, wake any threads waiting
+ * for carrier in the open routine.
+ */
+
+ jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev,
+ "carrier: virt DCD rose\n");
+
+ if (waitqueue_active(&(ch->ch_flags_wait)))
+ wake_up_interruptible(&ch->ch_flags_wait);
+ }
+
+ /*
+ * Test for a PHYSICAL carrier transition to HIGH.
+ */
+ if (((ch->ch_flags & CH_CD) == 0) && (phys_carrier == 1)) {
+
+ /*
+ * When carrier rises, wake any threads waiting
+ * for carrier in the open routine.
+ */
+
+ jsm_printk(CARR, INFO, &ch->ch_bd->pci_dev,
+ "carrier: physical DCD rose\n");
+
+ if (waitqueue_active(&(ch->ch_flags_wait)))
+ wake_up_interruptible(&ch->ch_flags_wait);
+ }
+
+ /*
+ * Test for a PHYSICAL transition to low, so long as we aren't
+ * currently ignoring physical transitions (which is what "virtual
+ * carrier" indicates).
+ *
+ * The transition of the virtual carrier to low really doesn't
+ * matter... it really only means "ignore carrier state", not
+ * "make pretend that carrier is there".
+ */
+ if ((virt_carrier == 0) && ((ch->ch_flags & CH_CD) != 0)
+ && (phys_carrier == 0)) {
+ /*
+ * When carrier drops:
+ *
+ * Drop carrier on all open units.
+ *
+ * Flush queues, waking up any task waiting in the
+ * line discipline.
+ *
+ * Send a hangup to the control terminal.
+ *
+ * Enable all select calls.
+ */
+ if (waitqueue_active(&(ch->ch_flags_wait)))
+ wake_up_interruptible(&ch->ch_flags_wait);
+ }
+
+ /*
+ * Make sure that our cached values reflect the current reality.
+ */
+ if (virt_carrier == 1)
+ ch->ch_flags |= CH_FCAR;
+ else
+ ch->ch_flags &= ~CH_FCAR;
+
+ if (phys_carrier == 1)
+ ch->ch_flags |= CH_CD;
+ else
+ ch->ch_flags &= ~CH_CD;
+}
+
+
+void jsm_check_queue_flow_control(struct jsm_channel *ch)
+{
+ int qleft = 0;
+
+ /* Store how much space we have left in the queue */
+ if ((qleft = ch->ch_r_tail - ch->ch_r_head - 1) < 0)
+ qleft += RQUEUEMASK + 1;
+
+ /*
+ * Check to see if we should enforce flow control on our queue because
+ * the ld (or user) isn't reading data out of our queue fast enuf.
+ *
+ * NOTE: This is done based on what the current flow control of the
+ * port is set for.
+ *
+ * 1) HWFLOW (RTS) - Turn off the UART's Receive interrupt.
+ * This will cause the UART's FIFO to back up, and force
+ * the RTS signal to be dropped.
+ * 2) SWFLOW (IXOFF) - Keep trying to send a stop character to
+ * the other side, in hopes it will stop sending data to us.
+ * 3) NONE - Nothing we can do. We will simply drop any extra data
+ * that gets sent into us when the queue fills up.
+ */
+ if (qleft < 256) {
+ /* HWFLOW */
+ if (ch->ch_c_cflag & CRTSCTS) {
+ if(!(ch->ch_flags & CH_RECEIVER_OFF)) {
+ ch->ch_bd->bd_ops->disable_receiver(ch);
+ ch->ch_flags |= (CH_RECEIVER_OFF);
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
+ "Internal queue hit hilevel mark (%d)! Turning off interrupts.\n",
+ qleft);
+ }
+ }
+ /* SWFLOW */
+ else if (ch->ch_c_iflag & IXOFF) {
+ if (ch->ch_stops_sent <= MAX_STOPS_SENT) {
+ ch->ch_bd->bd_ops->send_stop_character(ch);
+ ch->ch_stops_sent++;
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
+ "Sending stop char! Times sent: %x\n", ch->ch_stops_sent);
+ }
+ }
+ }
+
+ /*
+ * Check to see if we should unenforce flow control because
+ * ld (or user) finally read enuf data out of our queue.
+ *
+ * NOTE: This is done based on what the current flow control of the
+ * port is set for.
+ *
+ * 1) HWFLOW (RTS) - Turn back on the UART's Receive interrupt.
+ * This will cause the UART's FIFO to raise RTS back up,
+ * which will allow the other side to start sending data again.
+ * 2) SWFLOW (IXOFF) - Send a start character to
+ * the other side, so it will start sending data to us again.
+ * 3) NONE - Do nothing. Since we didn't do anything to turn off the
+ * other side, we don't need to do anything now.
+ */
+ if (qleft > (RQUEUESIZE / 2)) {
+ /* HWFLOW */
+ if (ch->ch_c_cflag & CRTSCTS) {
+ if (ch->ch_flags & CH_RECEIVER_OFF) {
+ ch->ch_bd->bd_ops->enable_receiver(ch);
+ ch->ch_flags &= ~(CH_RECEIVER_OFF);
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev,
+ "Internal queue hit lowlevel mark (%d)! Turning on interrupts.\n",
+ qleft);
+ }
+ }
+ /* SWFLOW */
+ else if (ch->ch_c_iflag & IXOFF && ch->ch_stops_sent) {
+ ch->ch_stops_sent = 0;
+ ch->ch_bd->bd_ops->send_start_character(ch);
+ jsm_printk(READ, INFO, &ch->ch_bd->pci_dev, "Sending start char!\n");
+ }
+ }
+}
+
+/*
+ * jsm_tty_write()
+ *
+ * Take data from the user or kernel and send it out to the FEP.
+ * In here exists all the Transparent Print magic as well.
+ */
+int jsm_tty_write(struct uart_port *port)
+{
+ int bufcount = 0, n = 0;
+ int data_count = 0,data_count1 =0;
+ u16 head;
+ u16 tail;
+ u16 tmask;
+ u32 remain;
+ int temp_tail = port->info->xmit.tail;
+ struct jsm_channel *channel = (struct jsm_channel *)port;
+
+ tmask = WQUEUEMASK;
+ head = (channel->ch_w_head) & tmask;
+ tail = (channel->ch_w_tail) & tmask;
+
+ if ((bufcount = tail - head - 1) < 0)
+ bufcount += WQUEUESIZE;
+
+ n = bufcount;
+
+ n = min(n, 56);
+ remain = WQUEUESIZE - head;
+
+ data_count = 0;
+ if (n >= remain) {
+ n -= remain;
+ while ((port->info->xmit.head != temp_tail) &&
+ (data_count < remain)) {
+ channel->ch_wqueue[head++] =
+ port->info->xmit.buf[temp_tail];
+
+ temp_tail++;
+ temp_tail &= (UART_XMIT_SIZE - 1);
+ data_count++;
+ }
+ if (data_count == remain) head = 0;
+ }
+
+ data_count1 = 0;
+ if (n > 0) {
+ remain = n;
+ while ((port->info->xmit.head != temp_tail) &&
+ (data_count1 < remain)) {
+ channel->ch_wqueue[head++] =
+ port->info->xmit.buf[temp_tail];
+
+ temp_tail++;
+ temp_tail &= (UART_XMIT_SIZE - 1);
+ data_count1++;
+
+ }
+ }
+
+ port->info->xmit.tail = temp_tail;
+
+ data_count += data_count1;
+ if (data_count) {
+ head &= tmask;
+ channel->ch_w_head = head;
+ }
+
+ if (data_count) {
+ channel->ch_bd->bd_ops->copy_data_from_queue_to_uart(channel);
+ }
+
+ return data_count;
+}
+
+static ssize_t jsm_driver_version_show(struct device_driver *ddp, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%s\n", JSM_VERSION);
+}
+static DRIVER_ATTR(version, S_IRUSR, jsm_driver_version_show, NULL);
+
+static ssize_t jsm_driver_state_show(struct device_driver *ddp, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%s\n", jsm_driver_state_text[jsm_driver_state]);
+}
+static DRIVER_ATTR(state, S_IRUSR, jsm_driver_state_show, NULL);
+
+void jsm_create_driver_sysfiles(struct device_driver *driverfs)
+{
+ driver_create_file(driverfs, &driver_attr_version);
+ driver_create_file(driverfs, &driver_attr_state);
+}
+
+void jsm_remove_driver_sysfiles(struct device_driver *driverfs)
+{
+ driver_remove_file(driverfs, &driver_attr_version);
+ driver_remove_file(driverfs, &driver_attr_state);
+}
diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
new file mode 100644
index 00000000000..08d61f13edc
--- /dev/null
+++ b/drivers/serial/m32r_sio.c
@@ -0,0 +1,1218 @@
+/*
+ * m32r_sio.c
+ *
+ * Driver for M32R serial ports
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ * Based on drivers/serial/8250.c.
+ *
+ * Copyright (C) 2001 Russell King.
+ * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/*
+ * A note about mapbase / membase
+ *
+ * mapbase is the physical address of the IO port. Currently, we don't
+ * support this very well, and it may well be dropped from this driver
+ * in future. As such, mapbase should be NULL.
+ *
+ * membase is an 'ioremapped' cookie. This is compatible with the old
+ * serial.c driver, and is currently the preferred form.
+ */
+#include <linux/config.h>
+
+#if defined(CONFIG_SERIAL_M32R_SIO_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/serial.h>
+#include <linux/serialP.h>
+#include <linux/delay.h>
+
+#include <asm/m32r.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#define PORT_M32R_BASE PORT_M32R_SIO
+#define PORT_INDEX(x) (x - PORT_M32R_BASE + 1)
+#define BAUD_RATE 115200
+
+#include <linux/serial_core.h>
+#include "m32r_sio.h"
+#include "m32r_sio_reg.h"
+
+/*
+ * Debugging.
+ */
+#if 0
+#define DEBUG_AUTOCONF(fmt...) printk(fmt)
+#else
+#define DEBUG_AUTOCONF(fmt...) do { } while (0)
+#endif
+
+#if 0
+#define DEBUG_INTR(fmt...) printk(fmt)
+#else
+#define DEBUG_INTR(fmt...) do { } while (0)
+#endif
+
+#define PASS_LIMIT 256
+
+/*
+ * We default to IRQ0 for the "no irq" hack. Some
+ * machine types want others as well - they're free
+ * to redefine this in their header file.
+ */
+#define is_real_interrupt(irq) ((irq) != 0)
+
+#include <asm/serial.h>
+
+/* Standard COM flags */
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+
+/*
+ * SERIAL_PORT_DFNS tells us about built-in ports that have no
+ * standard enumeration mechanism. Platforms that can find all
+ * serial ports via mechanisms like ACPI or PCI need not supply it.
+ */
+#undef SERIAL_PORT_DFNS
+#if defined(CONFIG_PLAT_USRV)
+
+#define SERIAL_PORT_DFNS \
+ /* UART CLK PORT IRQ FLAGS */ \
+ { 0, BASE_BAUD, 0x3F8, PLD_IRQ_UART0, STD_COM_FLAGS }, /* ttyS0 */ \
+ { 0, BASE_BAUD, 0x2F8, PLD_IRQ_UART1, STD_COM_FLAGS }, /* ttyS1 */
+
+#else /* !CONFIG_PLAT_USRV */
+
+#if defined(CONFIG_SERIAL_M32R_PLDSIO)
+#define SERIAL_PORT_DFNS \
+ { 0, BASE_BAUD, ((unsigned long)PLD_ESIO0CR), PLD_IRQ_SIO0_RCV, \
+ STD_COM_FLAGS }, /* ttyS0 */
+#else
+#define SERIAL_PORT_DFNS \
+ { 0, BASE_BAUD, M32R_SIO_OFFSET, M32R_IRQ_SIO0_R, \
+ STD_COM_FLAGS }, /* ttyS0 */
+#endif
+
+#endif /* !CONFIG_PLAT_USRV */
+
+static struct old_serial_port old_serial_port[] = {
+ SERIAL_PORT_DFNS /* defined in asm/serial.h */
+};
+
+#define UART_NR ARRAY_SIZE(old_serial_port)
+
+struct uart_sio_port {
+ struct uart_port port;
+ struct timer_list timer; /* "no irq" timer */
+ struct list_head list; /* ports on this IRQ */
+ unsigned short rev;
+ unsigned char acr;
+ unsigned char ier;
+ unsigned char lcr;
+ unsigned char mcr_mask; /* mask of user bits */
+ unsigned char mcr_force; /* mask of forced bits */
+ unsigned char lsr_break_flag;
+
+ /*
+ * We provide a per-port pm hook.
+ */
+ void (*pm)(struct uart_port *port,
+ unsigned int state, unsigned int old);
+};
+
+struct irq_info {
+ spinlock_t lock;
+ struct list_head *head;
+};
+
+static struct irq_info irq_lists[NR_IRQS];
+
+/*
+ * Here we define the default xmit fifo size used for each type of UART.
+ */
+static const struct serial_uart_config uart_config[] = {
+ [PORT_UNKNOWN] = {
+ .name = "unknown",
+ .dfl_xmit_fifo_size = 1,
+ .flags = 0,
+ },
+ [PORT_INDEX(PORT_M32R_SIO)] = {
+ .name = "M32RSIO",
+ .dfl_xmit_fifo_size = 1,
+ .flags = 0,
+ },
+};
+
+#ifdef CONFIG_SERIAL_M32R_PLDSIO
+
+#define __sio_in(x) inw((unsigned long)(x))
+#define __sio_out(v,x) outw((v),(unsigned long)(x))
+
+static inline void sio_set_baud_rate(unsigned long baud)
+{
+ unsigned short sbaud;
+ sbaud = (boot_cpu_data.bus_clock / (baud * 4))-1;
+ __sio_out(sbaud, PLD_ESIO0BAUR);
+}
+
+static void sio_reset(void)
+{
+ unsigned short tmp;
+
+ tmp = __sio_in(PLD_ESIO0RXB);
+ tmp = __sio_in(PLD_ESIO0RXB);
+ tmp = __sio_in(PLD_ESIO0CR);
+ sio_set_baud_rate(BAUD_RATE);
+ __sio_out(0x0300, PLD_ESIO0CR);
+ __sio_out(0x0003, PLD_ESIO0CR);
+}
+
+static void sio_init(void)
+{
+ unsigned short tmp;
+
+ tmp = __sio_in(PLD_ESIO0RXB);
+ tmp = __sio_in(PLD_ESIO0RXB);
+ tmp = __sio_in(PLD_ESIO0CR);
+ __sio_out(0x0300, PLD_ESIO0CR);
+ __sio_out(0x0003, PLD_ESIO0CR);
+}
+
+static void sio_error(int *status)
+{
+ printk("SIO0 error[%04x]\n", *status);
+ do {
+ sio_init();
+ } while ((*status = __sio_in(PLD_ESIO0CR)) != 3);
+}
+
+#else /* not CONFIG_SERIAL_M32R_PLDSIO */
+
+#define __sio_in(x) inl(x)
+#define __sio_out(v,x) outl((v),(x))
+
+static inline void sio_set_baud_rate(unsigned long baud)
+{
+ unsigned long i, j;
+
+ i = boot_cpu_data.bus_clock / (baud * 16);
+ j = (boot_cpu_data.bus_clock - (i * baud * 16)) / baud;
+ i -= 1;
+ j = (j + 1) >> 1;
+
+ __sio_out(i, M32R_SIO0_BAUR_PORTL);
+ __sio_out(j, M32R_SIO0_RBAUR_PORTL);
+}
+
+static void sio_reset(void)
+{
+ __sio_out(0x00000300, M32R_SIO0_CR_PORTL); /* init status */
+ __sio_out(0x00000800, M32R_SIO0_MOD1_PORTL); /* 8bit */
+ __sio_out(0x00000080, M32R_SIO0_MOD0_PORTL); /* 1stop non */
+ sio_set_baud_rate(BAUD_RATE);
+ __sio_out(0x00000000, M32R_SIO0_TRCR_PORTL);
+ __sio_out(0x00000003, M32R_SIO0_CR_PORTL); /* RXCEN */
+}
+
+static void sio_init(void)
+{
+ unsigned int tmp;
+
+ tmp = __sio_in(M32R_SIO0_RXB_PORTL);
+ tmp = __sio_in(M32R_SIO0_RXB_PORTL);
+ tmp = __sio_in(M32R_SIO0_STS_PORTL);
+ __sio_out(0x00000003, M32R_SIO0_CR_PORTL);
+}
+
+static void sio_error(int *status)
+{
+ printk("SIO0 error[%04x]\n", *status);
+ do {
+ sio_init();
+ } while ((*status = __sio_in(M32R_SIO0_CR_PORTL)) != 3);
+}
+
+#endif /* CONFIG_SERIAL_M32R_PLDSIO */
+
+static _INLINE_ unsigned int sio_in(struct uart_sio_port *up, int offset)
+{
+ return __sio_in(up->port.iobase + offset);
+}
+
+static _INLINE_ void sio_out(struct uart_sio_port *up, int offset, int value)
+{
+ __sio_out(value, up->port.iobase + offset);
+}
+
+static _INLINE_ unsigned int serial_in(struct uart_sio_port *up, int offset)
+{
+ if (!offset)
+ return 0;
+
+ return __sio_in(offset);
+}
+
+static _INLINE_ void
+serial_out(struct uart_sio_port *up, int offset, int value)
+{
+ if (!offset)
+ return;
+
+ __sio_out(value, offset);
+}
+
+static void m32r_sio_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+
+ if (up->ier & UART_IER_THRI) {
+ up->ier &= ~UART_IER_THRI;
+ serial_out(up, UART_IER, up->ier);
+ }
+}
+
+static void m32r_sio_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+#ifdef CONFIG_SERIAL_M32R_PLDSIO
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+ struct circ_buf *xmit = &up->port.info->xmit;
+
+ if (!(up->ier & UART_IER_THRI)) {
+ up->ier |= UART_IER_THRI;
+ serial_out(up, UART_IER, up->ier);
+ serial_out(up, UART_TX, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ up->port.icount.tx++;
+ }
+ while((serial_in(up, UART_LSR) & UART_EMPTY) != UART_EMPTY);
+#else
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+
+ if (!(up->ier & UART_IER_THRI)) {
+ up->ier |= UART_IER_THRI;
+ serial_out(up, UART_IER, up->ier);
+ }
+#endif
+}
+
+static void m32r_sio_stop_rx(struct uart_port *port)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+
+ up->ier &= ~UART_IER_RLSI;
+ up->port.read_status_mask &= ~UART_LSR_DR;
+ serial_out(up, UART_IER, up->ier);
+}
+
+static void m32r_sio_enable_ms(struct uart_port *port)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+
+ up->ier |= UART_IER_MSI;
+ serial_out(up, UART_IER, up->ier);
+}
+
+static _INLINE_ void receive_chars(struct uart_sio_port *up, int *status,
+ struct pt_regs *regs)
+{
+ struct tty_struct *tty = up->port.info->tty;
+ unsigned char ch;
+ int max_count = 256;
+
+ do {
+ if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
+ tty->flip.work.func((void *)tty);
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+ return; // if TTY_DONT_FLIP is set
+ }
+ ch = sio_in(up, SIORXB);
+ *tty->flip.char_buf_ptr = ch;
+ *tty->flip.flag_buf_ptr = TTY_NORMAL;
+ up->port.icount.rx++;
+
+ if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
+ UART_LSR_FE | UART_LSR_OE))) {
+ /*
+ * For statistics only
+ */
+ if (*status & UART_LSR_BI) {
+ *status &= ~(UART_LSR_FE | UART_LSR_PE);
+ up->port.icount.brk++;
+ /*
+ * We do the SysRQ and SAK checking
+ * here because otherwise the break
+ * may get masked by ignore_status_mask
+ * or read_status_mask.
+ */
+ if (uart_handle_break(&up->port))
+ goto ignore_char;
+ } else if (*status & UART_LSR_PE)
+ up->port.icount.parity++;
+ else if (*status & UART_LSR_FE)
+ up->port.icount.frame++;
+ if (*status & UART_LSR_OE)
+ up->port.icount.overrun++;
+
+ /*
+ * Mask off conditions which should be ingored.
+ */
+ *status &= up->port.read_status_mask;
+
+ if (up->port.line == up->port.cons->index) {
+ /* Recover the break flag from console xmit */
+ *status |= up->lsr_break_flag;
+ up->lsr_break_flag = 0;
+ }
+
+ if (*status & UART_LSR_BI) {
+ DEBUG_INTR("handling break....");
+ *tty->flip.flag_buf_ptr = TTY_BREAK;
+ } else if (*status & UART_LSR_PE)
+ *tty->flip.flag_buf_ptr = TTY_PARITY;
+ else if (*status & UART_LSR_FE)
+ *tty->flip.flag_buf_ptr = TTY_FRAME;
+ }
+ if (uart_handle_sysrq_char(&up->port, ch, regs))
+ goto ignore_char;
+ if ((*status & up->port.ignore_status_mask) == 0) {
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ tty->flip.count++;
+ }
+ if ((*status & UART_LSR_OE) &&
+ tty->flip.count < TTY_FLIPBUF_SIZE) {
+ /*
+ * Overrun is special, since it's reported
+ * immediately, and doesn't affect the current
+ * character.
+ */
+ *tty->flip.flag_buf_ptr = TTY_OVERRUN;
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ tty->flip.count++;
+ }
+ ignore_char:
+ *status = serial_in(up, UART_LSR);
+ } while ((*status & UART_LSR_DR) && (max_count-- > 0));
+ tty_flip_buffer_push(tty);
+}
+
+static _INLINE_ void transmit_chars(struct uart_sio_port *up)
+{
+ struct circ_buf *xmit = &up->port.info->xmit;
+ int count;
+
+ if (up->port.x_char) {
+#ifndef CONFIG_SERIAL_M32R_PLDSIO /* XXX */
+ serial_out(up, UART_TX, up->port.x_char);
+#endif
+ up->port.icount.tx++;
+ up->port.x_char = 0;
+ return;
+ }
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
+ m32r_sio_stop_tx(&up->port, 0);
+ return;
+ }
+
+ count = up->port.fifosize;
+ do {
+ serial_out(up, UART_TX, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ up->port.icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ while (!serial_in(up, UART_LSR) & UART_LSR_THRE);
+
+ } while (--count > 0);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+
+ DEBUG_INTR("THRE...");
+
+ if (uart_circ_empty(xmit))
+ m32r_sio_stop_tx(&up->port, 0);
+}
+
+/*
+ * This handles the interrupt from one port.
+ */
+static inline void m32r_sio_handle_port(struct uart_sio_port *up,
+ unsigned int status, struct pt_regs *regs)
+{
+ DEBUG_INTR("status = %x...", status);
+
+ if (status & 0x04)
+ receive_chars(up, &status, regs);
+ if (status & 0x01)
+ transmit_chars(up);
+}
+
+/*
+ * This is the serial driver's interrupt routine.
+ *
+ * Arjan thinks the old way was overly complex, so it got simplified.
+ * Alan disagrees, saying that need the complexity to handle the weird
+ * nature of ISA shared interrupts. (This is a special exception.)
+ *
+ * In order to handle ISA shared interrupts properly, we need to check
+ * that all ports have been serviced, and therefore the ISA interrupt
+ * line has been de-asserted.
+ *
+ * This means we need to loop through all ports. checking that they
+ * don't have an interrupt pending.
+ */
+static irqreturn_t m32r_sio_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ struct irq_info *i = dev_id;
+ struct list_head *l, *end = NULL;
+ int pass_counter = 0;
+
+ DEBUG_INTR("m32r_sio_interrupt(%d)...", irq);
+
+#ifdef CONFIG_SERIAL_M32R_PLDSIO
+// if (irq == PLD_IRQ_SIO0_SND)
+// irq = PLD_IRQ_SIO0_RCV;
+#else
+ if (irq == M32R_IRQ_SIO0_S)
+ irq = M32R_IRQ_SIO0_R;
+#endif
+
+ spin_lock(&i->lock);
+
+ l = i->head;
+ do {
+ struct uart_sio_port *up;
+ unsigned int sts;
+
+ up = list_entry(l, struct uart_sio_port, list);
+
+ sts = sio_in(up, SIOSTS);
+ if (sts & 0x5) {
+ spin_lock(&up->port.lock);
+ m32r_sio_handle_port(up, sts, regs);
+ spin_unlock(&up->port.lock);
+
+ end = NULL;
+ } else if (end == NULL)
+ end = l;
+
+ l = l->next;
+
+ if (l == i->head && pass_counter++ > PASS_LIMIT) {
+ if (sts & 0xe0)
+ sio_error(&sts);
+ break;
+ }
+ } while (l != end);
+
+ spin_unlock(&i->lock);
+
+ DEBUG_INTR("end.\n");
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * To support ISA shared interrupts, we need to have one interrupt
+ * handler that ensures that the IRQ line has been deasserted
+ * before returning. Failing to do this will result in the IRQ
+ * line being stuck active, and, since ISA irqs are edge triggered,
+ * no more IRQs will be seen.
+ */
+static void serial_do_unlink(struct irq_info *i, struct uart_sio_port *up)
+{
+ spin_lock_irq(&i->lock);
+
+ if (!list_empty(i->head)) {
+ if (i->head == &up->list)
+ i->head = i->head->next;
+ list_del(&up->list);
+ } else {
+ BUG_ON(i->head != &up->list);
+ i->head = NULL;
+ }
+
+ spin_unlock_irq(&i->lock);
+}
+
+static int serial_link_irq_chain(struct uart_sio_port *up)
+{
+ struct irq_info *i = irq_lists + up->port.irq;
+ int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? SA_SHIRQ : 0;
+
+ spin_lock_irq(&i->lock);
+
+ if (i->head) {
+ list_add(&up->list, i->head);
+ spin_unlock_irq(&i->lock);
+
+ ret = 0;
+ } else {
+ INIT_LIST_HEAD(&up->list);
+ i->head = &up->list;
+ spin_unlock_irq(&i->lock);
+
+ ret = request_irq(up->port.irq, m32r_sio_interrupt,
+ irq_flags, "SIO0-RX", i);
+ ret |= request_irq(up->port.irq + 1, m32r_sio_interrupt,
+ irq_flags, "SIO0-TX", i);
+ if (ret < 0)
+ serial_do_unlink(i, up);
+ }
+
+ return ret;
+}
+
+static void serial_unlink_irq_chain(struct uart_sio_port *up)
+{
+ struct irq_info *i = irq_lists + up->port.irq;
+
+ BUG_ON(i->head == NULL);
+
+ if (list_empty(i->head)) {
+ free_irq(up->port.irq, i);
+ free_irq(up->port.irq + 1, i);
+ }
+
+ serial_do_unlink(i, up);
+}
+
+/*
+ * This function is used to handle ports that do not have an interrupt.
+ */
+static void m32r_sio_timeout(unsigned long data)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)data;
+ unsigned int timeout;
+ unsigned int sts;
+
+ sts = sio_in(up, SIOSTS);
+ if (sts & 0x5) {
+ spin_lock(&up->port.lock);
+ m32r_sio_handle_port(up, sts, NULL);
+ spin_unlock(&up->port.lock);
+ }
+
+ timeout = up->port.timeout;
+ timeout = timeout > 6 ? (timeout / 2 - 2) : 1;
+ mod_timer(&up->timer, jiffies + timeout);
+}
+
+static unsigned int m32r_sio_tx_empty(struct uart_port *port)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+ unsigned long flags;
+ unsigned int ret;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return ret;
+}
+
+static unsigned int m32r_sio_get_mctrl(struct uart_port *port)
+{
+ return 0;
+}
+
+static void m32r_sio_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+
+}
+
+static void m32r_sio_break_ctl(struct uart_port *port, int break_state)
+{
+
+}
+
+static int m32r_sio_startup(struct uart_port *port)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+ int retval;
+
+ sio_init();
+
+ /*
+ * If the "interrupt" for this port doesn't correspond with any
+ * hardware interrupt, we use a timer-based system. The original
+ * driver used to do this with IRQ0.
+ */
+ if (!is_real_interrupt(up->port.irq)) {
+ unsigned int timeout = up->port.timeout;
+
+ timeout = timeout > 6 ? (timeout / 2 - 2) : 1;
+
+ up->timer.data = (unsigned long)up;
+ mod_timer(&up->timer, jiffies + timeout);
+ } else {
+ retval = serial_link_irq_chain(up);
+ if (retval)
+ return retval;
+ }
+
+ /*
+ * Finally, enable interrupts. Note: Modem status interrupts
+ * are set via set_termios(), which will be occurring imminently
+ * anyway, so we don't enable them here.
+ * - M32R_SIO: 0x0c
+ * - M32R_PLDSIO: 0x04
+ */
+ up->ier = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI;
+ sio_out(up, SIOTRCR, up->ier);
+
+ /*
+ * And clear the interrupt registers again for luck.
+ */
+ sio_reset();
+
+ return 0;
+}
+
+static void m32r_sio_shutdown(struct uart_port *port)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+
+ /*
+ * Disable interrupts from this port
+ */
+ up->ier = 0;
+ sio_out(up, SIOTRCR, 0);
+
+ /*
+ * Disable break condition and FIFOs
+ */
+
+ sio_init();
+
+ if (!is_real_interrupt(up->port.irq))
+ del_timer_sync(&up->timer);
+ else
+ serial_unlink_irq_chain(up);
+}
+
+static unsigned int m32r_sio_get_divisor(struct uart_port *port,
+ unsigned int baud)
+{
+ return uart_get_divisor(port, baud);
+}
+
+static void m32r_sio_set_termios(struct uart_port *port,
+ struct termios *termios, struct termios *old)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+ unsigned char cval = 0;
+ unsigned long flags;
+ unsigned int baud, quot;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ cval = 0x00;
+ break;
+ case CS6:
+ cval = 0x01;
+ break;
+ case CS7:
+ cval = 0x02;
+ break;
+ default:
+ case CS8:
+ cval = 0x03;
+ break;
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ cval |= 0x04;
+ if (termios->c_cflag & PARENB)
+ cval |= UART_LCR_PARITY;
+ if (!(termios->c_cflag & PARODD))
+ cval |= UART_LCR_EPAR;
+#ifdef CMSPAR
+ if (termios->c_cflag & CMSPAR)
+ cval |= UART_LCR_SPAR;
+#endif
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+#ifdef CONFIG_SERIAL_M32R_PLDSIO
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/4);
+#else
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+#endif
+ quot = m32r_sio_get_divisor(port, baud);
+
+ /*
+ * Ok, we're now changing the port state. Do it with
+ * interrupts disabled.
+ */
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ sio_set_baud_rate(baud);
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
+ if (termios->c_iflag & INPCK)
+ up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ up->port.read_status_mask |= UART_LSR_BI;
+
+ /*
+ * Characteres to ignore
+ */
+ up->port.ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
+ if (termios->c_iflag & IGNBRK) {
+ up->port.ignore_status_mask |= UART_LSR_BI;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_OE;
+ }
+
+ /*
+ * ignore all characters if CREAD is not set
+ */
+ if ((termios->c_cflag & CREAD) == 0)
+ up->port.ignore_status_mask |= UART_LSR_DR;
+
+ /*
+ * CTS flow control flag and modem status interrupts
+ */
+ up->ier &= ~UART_IER_MSI;
+ if (UART_ENABLE_MS(&up->port, termios->c_cflag))
+ up->ier |= UART_IER_MSI;
+
+ serial_out(up, UART_IER, up->ier);
+
+ up->lcr = cval; /* Save LCR */
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void m32r_sio_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+
+ if (up->pm)
+ up->pm(port, state, oldstate);
+}
+
+/*
+ * Resource handling. This is complicated by the fact that resources
+ * depend on the port type. Maybe we should be claiming the standard
+ * 8250 ports, and then trying to get other resources as necessary?
+ */
+static int
+m32r_sio_request_std_resource(struct uart_sio_port *up, struct resource **res)
+{
+ unsigned int size = 8 << up->port.regshift;
+#ifndef CONFIG_SERIAL_M32R_PLDSIO
+ unsigned long start;
+#endif
+ int ret = 0;
+
+ switch (up->port.iotype) {
+ case UPIO_MEM:
+ if (up->port.mapbase) {
+#ifdef CONFIG_SERIAL_M32R_PLDSIO
+ *res = request_mem_region(up->port.mapbase, size, "serial");
+#else
+ start = up->port.mapbase;
+ *res = request_mem_region(start, size, "serial");
+#endif
+ if (!*res)
+ ret = -EBUSY;
+ }
+ break;
+
+ case UPIO_PORT:
+ *res = request_region(up->port.iobase, size, "serial");
+ if (!*res)
+ ret = -EBUSY;
+ break;
+ }
+ return ret;
+}
+
+static void m32r_sio_release_port(struct uart_port *port)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+ unsigned long start, offset = 0, size = 0;
+
+ size <<= up->port.regshift;
+
+ switch (up->port.iotype) {
+ case UPIO_MEM:
+ if (up->port.mapbase) {
+ /*
+ * Unmap the area.
+ */
+ iounmap(up->port.membase);
+ up->port.membase = NULL;
+
+ start = up->port.mapbase;
+
+ if (size)
+ release_mem_region(start + offset, size);
+ release_mem_region(start, 8 << up->port.regshift);
+ }
+ break;
+
+ case UPIO_PORT:
+ start = up->port.iobase;
+
+ if (size)
+ release_region(start + offset, size);
+ release_region(start + offset, 8 << up->port.regshift);
+ break;
+
+ default:
+ break;
+ }
+}
+
+static int m32r_sio_request_port(struct uart_port *port)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+ struct resource *res = NULL;
+ int ret = 0;
+
+ ret = m32r_sio_request_std_resource(up, &res);
+
+ /*
+ * If we have a mapbase, then request that as well.
+ */
+ if (ret == 0 && up->port.flags & UPF_IOREMAP) {
+ int size = res->end - res->start + 1;
+
+ up->port.membase = ioremap(up->port.mapbase, size);
+ if (!up->port.membase)
+ ret = -ENOMEM;
+ }
+
+ if (ret < 0) {
+ if (res)
+ release_resource(res);
+ }
+
+ return ret;
+}
+
+static void m32r_sio_config_port(struct uart_port *port, int flags)
+{
+ struct uart_sio_port *up = (struct uart_sio_port *)port;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ up->port.type = (PORT_M32R_SIO - PORT_M32R_BASE + 1);
+ up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size;
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static int
+m32r_sio_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ if (ser->irq >= NR_IRQS || ser->irq < 0 ||
+ ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
+ ser->type >= ARRAY_SIZE(uart_config))
+ return -EINVAL;
+ return 0;
+}
+
+static const char *
+m32r_sio_type(struct uart_port *port)
+{
+ int type = port->type;
+
+ if (type >= ARRAY_SIZE(uart_config))
+ type = 0;
+ return uart_config[type].name;
+}
+
+static struct uart_ops m32r_sio_pops = {
+ .tx_empty = m32r_sio_tx_empty,
+ .set_mctrl = m32r_sio_set_mctrl,
+ .get_mctrl = m32r_sio_get_mctrl,
+ .stop_tx = m32r_sio_stop_tx,
+ .start_tx = m32r_sio_start_tx,
+ .stop_rx = m32r_sio_stop_rx,
+ .enable_ms = m32r_sio_enable_ms,
+ .break_ctl = m32r_sio_break_ctl,
+ .startup = m32r_sio_startup,
+ .shutdown = m32r_sio_shutdown,
+ .set_termios = m32r_sio_set_termios,
+ .pm = m32r_sio_pm,
+ .type = m32r_sio_type,
+ .release_port = m32r_sio_release_port,
+ .request_port = m32r_sio_request_port,
+ .config_port = m32r_sio_config_port,
+ .verify_port = m32r_sio_verify_port,
+};
+
+static struct uart_sio_port m32r_sio_ports[UART_NR];
+
+static void __init m32r_sio_init_ports(void)
+{
+ struct uart_sio_port *up;
+ static int first = 1;
+ int i;
+
+ if (!first)
+ return;
+ first = 0;
+
+ for (i = 0, up = m32r_sio_ports; i < ARRAY_SIZE(old_serial_port);
+ i++, up++) {
+ up->port.iobase = old_serial_port[i].port;
+ up->port.irq = irq_canonicalize(old_serial_port[i].irq);
+ up->port.uartclk = old_serial_port[i].baud_base * 16;
+ up->port.flags = old_serial_port[i].flags;
+ up->port.membase = old_serial_port[i].iomem_base;
+ up->port.iotype = old_serial_port[i].io_type;
+ up->port.regshift = old_serial_port[i].iomem_reg_shift;
+ up->port.ops = &m32r_sio_pops;
+ }
+}
+
+static void __init m32r_sio_register_ports(struct uart_driver *drv)
+{
+ int i;
+
+ m32r_sio_init_ports();
+
+ for (i = 0; i < UART_NR; i++) {
+ struct uart_sio_port *up = &m32r_sio_ports[i];
+
+ up->port.line = i;
+ up->port.ops = &m32r_sio_pops;
+ init_timer(&up->timer);
+ up->timer.function = m32r_sio_timeout;
+
+ /*
+ * ALPHA_KLUDGE_MCR needs to be killed.
+ */
+ up->mcr_mask = ~ALPHA_KLUDGE_MCR;
+ up->mcr_force = ALPHA_KLUDGE_MCR;
+
+ uart_add_one_port(drv, &up->port);
+ }
+}
+
+#ifdef CONFIG_SERIAL_M32R_SIO_CONSOLE
+
+/*
+ * Wait for transmitter & holding register to empty
+ */
+static inline void wait_for_xmitr(struct uart_sio_port *up)
+{
+ unsigned int status, tmout = 10000;
+
+ /* Wait up to 10ms for the character(s) to be sent. */
+ do {
+ status = sio_in(up, SIOSTS);
+
+ if (--tmout == 0)
+ break;
+ udelay(1);
+ } while ((status & UART_EMPTY) != UART_EMPTY);
+
+ /* Wait up to 1s for flow control if necessary */
+ if (up->port.flags & UPF_CONS_FLOW) {
+ tmout = 1000000;
+ while (--tmout)
+ udelay(1);
+ }
+}
+
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ *
+ * The console_lock must be held when we get here.
+ */
+static void m32r_sio_console_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ struct uart_sio_port *up = &m32r_sio_ports[co->index];
+ unsigned int ier;
+ int i;
+
+ /*
+ * First save the UER then disable the interrupts
+ */
+ ier = sio_in(up, SIOTRCR);
+ sio_out(up, SIOTRCR, 0);
+
+ /*
+ * Now, do each character
+ */
+ for (i = 0; i < count; i++, s++) {
+ wait_for_xmitr(up);
+
+ /*
+ * Send the character out.
+ * If a LF, also do CR...
+ */
+ sio_out(up, SIOTXB, *s);
+
+ if (*s == 10) {
+ wait_for_xmitr(up);
+ sio_out(up, SIOTXB, 13);
+ }
+ }
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the IER
+ */
+ wait_for_xmitr(up);
+ sio_out(up, SIOTRCR, ier);
+}
+
+static int __init m32r_sio_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ if (co->index >= UART_NR)
+ co->index = 0;
+ port = &m32r_sio_ports[co->index].port;
+
+ /*
+ * Temporary fix.
+ */
+ spin_lock_init(&port->lock);
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+extern struct uart_driver m32r_sio_reg;
+static struct console m32r_sio_console = {
+ .name = "ttyS",
+ .write = m32r_sio_console_write,
+ .device = uart_console_device,
+ .setup = m32r_sio_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &m32r_sio_reg,
+};
+
+static int __init m32r_sio_console_init(void)
+{
+ sio_reset();
+ sio_init();
+ m32r_sio_init_ports();
+ register_console(&m32r_sio_console);
+ return 0;
+}
+console_initcall(m32r_sio_console_init);
+
+#define M32R_SIO_CONSOLE &m32r_sio_console
+#else
+#define M32R_SIO_CONSOLE NULL
+#endif
+
+static struct uart_driver m32r_sio_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "sio",
+ .devfs_name = "tts/",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+ .minor = 64,
+ .nr = UART_NR,
+ .cons = M32R_SIO_CONSOLE,
+};
+
+/**
+ * m32r_sio_suspend_port - suspend one serial port
+ * @line: serial line number
+ *
+ * Suspend one serial port.
+ */
+void m32r_sio_suspend_port(int line)
+{
+ uart_suspend_port(&m32r_sio_reg, &m32r_sio_ports[line].port);
+}
+
+/**
+ * m32r_sio_resume_port - resume one serial port
+ * @line: serial line number
+ *
+ * Resume one serial port.
+ */
+void m32r_sio_resume_port(int line)
+{
+ uart_resume_port(&m32r_sio_reg, &m32r_sio_ports[line].port);
+}
+
+static int __init m32r_sio_init(void)
+{
+ int ret, i;
+
+ printk(KERN_INFO "Serial: M32R SIO driver $Revision: 1.11 $ ");
+
+ for (i = 0; i < NR_IRQS; i++)
+ spin_lock_init(&irq_lists[i].lock);
+
+ ret = uart_register_driver(&m32r_sio_reg);
+ if (ret >= 0)
+ m32r_sio_register_ports(&m32r_sio_reg);
+
+ return ret;
+}
+
+static void __exit m32r_sio_exit(void)
+{
+ int i;
+
+ for (i = 0; i < UART_NR; i++)
+ uart_remove_one_port(&m32r_sio_reg, &m32r_sio_ports[i].port);
+
+ uart_unregister_driver(&m32r_sio_reg);
+}
+
+module_init(m32r_sio_init);
+module_exit(m32r_sio_exit);
+
+EXPORT_SYMBOL(m32r_sio_suspend_port);
+EXPORT_SYMBOL(m32r_sio_resume_port);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Generic M32R SIO serial driver $Revision: 1.11 $");
diff --git a/drivers/serial/m32r_sio.h b/drivers/serial/m32r_sio.h
new file mode 100644
index 00000000000..07d0dd80aa3
--- /dev/null
+++ b/drivers/serial/m32r_sio.h
@@ -0,0 +1,55 @@
+/*
+ * m32r_sio.h
+ *
+ * Driver for M32R serial ports
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ * Based on drivers/serial/8250.h.
+ *
+ * Copyright (C) 2001 Russell King.
+ * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/config.h>
+
+struct m32r_sio_probe {
+ struct module *owner;
+ int (*pci_init_one)(struct pci_dev *dev);
+ void (*pci_remove_one)(struct pci_dev *dev);
+ void (*pnp_init)(void);
+};
+
+int m32r_sio_register_probe(struct m32r_sio_probe *probe);
+void m32r_sio_unregister_probe(struct m32r_sio_probe *probe);
+void m32r_sio_get_irq_map(unsigned int *map);
+void m32r_sio_suspend_port(int line);
+void m32r_sio_resume_port(int line);
+
+struct old_serial_port {
+ unsigned int uart;
+ unsigned int baud_base;
+ unsigned int port;
+ unsigned int irq;
+ unsigned int flags;
+ unsigned char io_type;
+ unsigned char *iomem_base;
+ unsigned short iomem_reg_shift;
+};
+
+#define _INLINE_ inline
+
+#define PROBE_RSA (1 << 0)
+#define PROBE_ANY (~0)
+
+#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
+
+#ifdef CONFIG_SERIAL_SIO_SHARE_IRQ
+#define M32R_SIO_SHARE_IRQS 1
+#else
+#define M32R_SIO_SHARE_IRQS 0
+#endif
diff --git a/drivers/serial/m32r_sio_reg.h b/drivers/serial/m32r_sio_reg.h
new file mode 100644
index 00000000000..9c864529451
--- /dev/null
+++ b/drivers/serial/m32r_sio_reg.h
@@ -0,0 +1,153 @@
+/*
+ * m32r_sio_reg.h
+ *
+ * Copyright (C) 1992, 1994 by Theodore Ts'o.
+ * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
+ *
+ * Redistribution of this file is permitted under the terms of the GNU
+ * Public License (GPL)
+ *
+ * These are the UART port assignments, expressed as offsets from the base
+ * register. These assignments should hold for any serial port based on
+ * a 8250, 16450, or 16550(A).
+ */
+
+#ifndef _M32R_SIO_REG_H
+#define _M32R_SIO_REG_H
+
+#include <linux/config.h>
+
+#ifdef CONFIG_SERIAL_M32R_PLDSIO
+
+#define SIOCR 0x000
+#define SIOMOD0 0x002
+#define SIOMOD1 0x004
+#define SIOSTS 0x006
+#define SIOTRCR 0x008
+#define SIOBAUR 0x00a
+// #define SIORBAUR 0x018
+#define SIOTXB 0x00c
+#define SIORXB 0x00e
+
+#define UART_RX ((unsigned long) PLD_ESIO0RXB)
+ /* In: Receive buffer (DLAB=0) */
+#define UART_TX ((unsigned long) PLD_ESIO0TXB)
+ /* Out: Transmit buffer (DLAB=0) */
+#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */
+#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx
+ * In: Fifo count
+ * Out: Fifo custom trigger levels
+ * XR16C85x only */
+
+#define UART_DLM 0 /* Out: Divisor Latch High (DLAB=1) */
+#define UART_IER ((unsigned long) PLD_ESIO0INTCR)
+ /* Out: Interrupt Enable Register */
+#define UART_FCTR 0 /* (LCR=BF) Feature Control Register
+ * XR16C85x only */
+
+#define UART_IIR 0 /* In: Interrupt ID Register */
+#define UART_FCR 0 /* Out: FIFO Control Register */
+#define UART_EFR 0 /* I/O: Extended Features Register */
+ /* (DLAB=1, 16C660 only) */
+
+#define UART_LCR 0 /* Out: Line Control Register */
+#define UART_MCR 0 /* Out: Modem Control Register */
+#define UART_LSR ((unsigned long) PLD_ESIO0STS)
+ /* In: Line Status Register */
+#define UART_MSR 0 /* In: Modem Status Register */
+#define UART_SCR 0 /* I/O: Scratch Register */
+#define UART_EMSR 0 /* (LCR=BF) Extended Mode Select Register
+ * FCTR bit 6 selects SCR or EMSR
+ * XR16c85x only */
+
+#else /* not CONFIG_SERIAL_M32R_PLDSIO */
+
+#define SIOCR 0x000
+#define SIOMOD0 0x004
+#define SIOMOD1 0x008
+#define SIOSTS 0x00c
+#define SIOTRCR 0x010
+#define SIOBAUR 0x014
+#define SIORBAUR 0x018
+#define SIOTXB 0x01c
+#define SIORXB 0x020
+
+#define UART_RX M32R_SIO0_RXB_PORTL /* In: Receive buffer (DLAB=0) */
+#define UART_TX M32R_SIO0_TXB_PORTL /* Out: Transmit buffer (DLAB=0) */
+#define UART_DLL 0 /* Out: Divisor Latch Low (DLAB=1) */
+#define UART_TRG 0 /* (LCR=BF) FCTR bit 7 selects Rx or Tx
+ * In: Fifo count
+ * Out: Fifo custom trigger levels
+ * XR16C85x only */
+
+#define UART_DLM 0 /* Out: Divisor Latch High (DLAB=1) */
+#define UART_IER M32R_SIO0_TRCR_PORTL /* Out: Interrupt Enable Register */
+#define UART_FCTR 0 /* (LCR=BF) Feature Control Register
+ * XR16C85x only */
+
+#define UART_IIR 0 /* In: Interrupt ID Register */
+#define UART_FCR 0 /* Out: FIFO Control Register */
+#define UART_EFR 0 /* I/O: Extended Features Register */
+ /* (DLAB=1, 16C660 only) */
+
+#define UART_LCR 0 /* Out: Line Control Register */
+#define UART_MCR 0 /* Out: Modem Control Register */
+#define UART_LSR M32R_SIO0_STS_PORTL /* In: Line Status Register */
+#define UART_MSR 0 /* In: Modem Status Register */
+#define UART_SCR 0 /* I/O: Scratch Register */
+#define UART_EMSR 0 /* (LCR=BF) Extended Mode Select Register
+ * FCTR bit 6 selects SCR or EMSR
+ * XR16c85x only */
+
+#endif /* CONFIG_SERIAL_M32R_PLDSIO */
+
+#define UART_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+
+/*
+ * These are the definitions for the Line Control Register
+ *
+ * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting
+ * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
+ */
+#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */
+#define UART_LCR_SBC 0x40 /* Set break control */
+#define UART_LCR_SPAR 0x20 /* Stick parity (?) */
+#define UART_LCR_EPAR 0x10 /* Even parity select */
+#define UART_LCR_PARITY 0x08 /* Parity Enable */
+#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */
+#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */
+#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */
+#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */
+#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */
+
+/*
+ * These are the definitions for the Line Status Register
+ */
+#define UART_LSR_TEMT 0x02 /* Transmitter empty */
+#define UART_LSR_THRE 0x01 /* Transmit-hold-register empty */
+#define UART_LSR_BI 0x00 /* Break interrupt indicator */
+#define UART_LSR_FE 0x80 /* Frame error indicator */
+#define UART_LSR_PE 0x40 /* Parity error indicator */
+#define UART_LSR_OE 0x20 /* Overrun error indicator */
+#define UART_LSR_DR 0x04 /* Receiver data ready */
+
+/*
+ * These are the definitions for the Interrupt Identification Register
+ */
+#define UART_IIR_NO_INT 0x01 /* No interrupts pending */
+#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */
+
+#define UART_IIR_MSI 0x00 /* Modem status interrupt */
+#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */
+#define UART_IIR_RDI 0x04 /* Receiver data interrupt */
+#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */
+
+/*
+ * These are the definitions for the Interrupt Enable Register
+ */
+#define UART_IER_MSI 0x00 /* Enable Modem status interrupt */
+#define UART_IER_RLSI 0x08 /* Enable receiver line status interrupt */
+#define UART_IER_THRI 0x03 /* Enable Transmitter holding register int. */
+#define UART_IER_RDI 0x04 /* Enable receiver data interrupt */
+
+#endif /* _M32R_SIO_REG_H */
diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c
new file mode 100644
index 00000000000..8c40167778d
--- /dev/null
+++ b/drivers/serial/mcfserial.c
@@ -0,0 +1,1883 @@
+/*
+ * mcfserial.c -- serial driver for ColdFire internal UARTS.
+ *
+ * Copyright (C) 1999-2003 Greg Ungerer <gerg@snapgear.com>
+ * Copyright (c) 2000-2001 Lineo, Inc. <www.lineo.com>
+ * Copyright (C) 2001-2002 SnapGear Inc. <www.snapgear.com>
+ *
+ * Based on code from 68332serial.c which was:
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1998 TSHG
+ * Copyright (c) 1999 Rt-Control Inc. <jeff@uclinux.org>
+ *
+ * Changes:
+ * 08/07/2003 Daniele Bellucci <bellucda@tiscali.it>
+ * some cleanups in mcfrs_write.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/wait.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+#include <linux/kernel.h>
+#include <linux/serial.h>
+#include <linux/serialP.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/segment.h>
+#include <asm/semaphore.h>
+#include <asm/delay.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
+#include <asm/nettel.h>
+#include <asm/uaccess.h>
+#include "mcfserial.h"
+
+struct timer_list mcfrs_timer_struct;
+
+/*
+ * Default console baud rate, we use this as the default
+ * for all ports so init can just open /dev/console and
+ * keep going. Perhaps one day the cflag settings for the
+ * console can be used instead.
+ */
+#if defined(CONFIG_ARNEWSH) || defined(CONFIG_MOTOROLA) || defined(CONFIG_senTec) || defined(CONFIG_SNEHA)
+#define CONSOLE_BAUD_RATE 19200
+#define DEFAULT_CBAUD B19200
+#endif
+
+#if defined(CONFIG_HW_FEITH)
+ #define CONSOLE_BAUD_RATE 38400
+ #define DEFAULT_CBAUD B38400
+#endif
+
+#ifndef CONSOLE_BAUD_RATE
+#define CONSOLE_BAUD_RATE 9600
+#define DEFAULT_CBAUD B9600
+#endif
+
+int mcfrs_console_inited = 0;
+int mcfrs_console_port = -1;
+int mcfrs_console_baud = CONSOLE_BAUD_RATE;
+int mcfrs_console_cbaud = DEFAULT_CBAUD;
+
+/*
+ * Driver data structures.
+ */
+static struct tty_driver *mcfrs_serial_driver;
+
+/* number of characters left in xmit buffer before we ask for more */
+#define WAKEUP_CHARS 256
+
+/* Debugging...
+ */
+#undef SERIAL_DEBUG_OPEN
+#undef SERIAL_DEBUG_FLOW
+
+#if defined(CONFIG_M527x) || defined(CONFIG_M528x)
+#define IRQBASE (MCFINT_VECBASE+MCFINT_UART0)
+#else
+#define IRQBASE 73
+#endif
+
+/*
+ * Configuration table, UARTs to look for at startup.
+ */
+static struct mcf_serial mcfrs_table[] = {
+ { /* ttyS0 */
+ .magic = 0,
+ .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE1),
+ .irq = IRQBASE,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ },
+ { /* ttyS1 */
+ .magic = 0,
+ .addr = (volatile unsigned char *) (MCF_MBAR+MCFUART_BASE2),
+ .irq = IRQBASE+1,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ },
+};
+
+
+#define NR_PORTS (sizeof(mcfrs_table) / sizeof(struct mcf_serial))
+
+/*
+ * This is used to figure out the divisor speeds and the timeouts.
+ */
+static int mcfrs_baud_table[] = {
+ 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
+ 9600, 19200, 38400, 57600, 115200, 230400, 460800, 0
+};
+#define MCFRS_BAUD_TABLE_SIZE \
+ (sizeof(mcfrs_baud_table)/sizeof(mcfrs_baud_table[0]))
+
+
+#ifdef CONFIG_MAGIC_SYSRQ
+/*
+ * Magic system request keys. Used for debugging...
+ */
+extern int magic_sysrq_key(int ch);
+#endif
+
+
+/*
+ * Forware declarations...
+ */
+static void mcfrs_change_speed(struct mcf_serial *info);
+static void mcfrs_wait_until_sent(struct tty_struct *tty, int timeout);
+
+
+static inline int serial_paranoia_check(struct mcf_serial *info,
+ char *name, const char *routine)
+{
+#ifdef SERIAL_PARANOIA_CHECK
+ static const char badmagic[] =
+ "MCFRS(warning): bad magic number for serial struct %s in %s\n";
+ static const char badinfo[] =
+ "MCFRS(warning): null mcf_serial for %s in %s\n";
+
+ if (!info) {
+ printk(badinfo, name, routine);
+ return 1;
+ }
+ if (info->magic != SERIAL_MAGIC) {
+ printk(badmagic, name, routine);
+ return 1;
+ }
+#endif
+ return 0;
+}
+
+/*
+ * Sets or clears DTR and RTS on the requested line.
+ */
+static void mcfrs_setsignals(struct mcf_serial *info, int dtr, int rts)
+{
+ volatile unsigned char *uartp;
+ unsigned long flags;
+
+#if 0
+ printk("%s(%d): mcfrs_setsignals(info=%x,dtr=%d,rts=%d)\n",
+ __FILE__, __LINE__, info, dtr, rts);
+#endif
+
+ local_irq_save(flags);
+ if (dtr >= 0) {
+#ifdef MCFPP_DTR0
+ if (info->line)
+ mcf_setppdata(MCFPP_DTR1, (dtr ? 0 : MCFPP_DTR1));
+ else
+ mcf_setppdata(MCFPP_DTR0, (dtr ? 0 : MCFPP_DTR0));
+#endif
+ }
+ if (rts >= 0) {
+ uartp = info->addr;
+ if (rts) {
+ info->sigs |= TIOCM_RTS;
+ uartp[MCFUART_UOP1] = MCFUART_UOP_RTS;
+ } else {
+ info->sigs &= ~TIOCM_RTS;
+ uartp[MCFUART_UOP0] = MCFUART_UOP_RTS;
+ }
+ }
+ local_irq_restore(flags);
+ return;
+}
+
+/*
+ * Gets values of serial signals.
+ */
+static int mcfrs_getsignals(struct mcf_serial *info)
+{
+ volatile unsigned char *uartp;
+ unsigned long flags;
+ int sigs;
+#if defined(CONFIG_NETtel) && defined(CONFIG_M5307)
+ unsigned short ppdata;
+#endif
+
+#if 0
+ printk("%s(%d): mcfrs_getsignals(info=%x)\n", __FILE__, __LINE__);
+#endif
+
+ local_irq_save(flags);
+ uartp = info->addr;
+ sigs = (uartp[MCFUART_UIPR] & MCFUART_UIPR_CTS) ? 0 : TIOCM_CTS;
+ sigs |= (info->sigs & TIOCM_RTS);
+
+#ifdef MCFPP_DCD0
+{
+ unsigned int ppdata;
+ ppdata = mcf_getppdata();
+ if (info->line == 0) {
+ sigs |= (ppdata & MCFPP_DCD0) ? 0 : TIOCM_CD;
+ sigs |= (ppdata & MCFPP_DTR0) ? 0 : TIOCM_DTR;
+ } else if (info->line == 1) {
+ sigs |= (ppdata & MCFPP_DCD1) ? 0 : TIOCM_CD;
+ sigs |= (ppdata & MCFPP_DTR1) ? 0 : TIOCM_DTR;
+ }
+}
+#endif
+
+ local_irq_restore(flags);
+ return(sigs);
+}
+
+/*
+ * ------------------------------------------------------------
+ * mcfrs_stop() and mcfrs_start()
+ *
+ * This routines are called before setting or resetting tty->stopped.
+ * They enable or disable transmitter interrupts, as necessary.
+ * ------------------------------------------------------------
+ */
+static void mcfrs_stop(struct tty_struct *tty)
+{
+ volatile unsigned char *uartp;
+ struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
+ unsigned long flags;
+
+ if (serial_paranoia_check(info, tty->name, "mcfrs_stop"))
+ return;
+
+ local_irq_save(flags);
+ uartp = info->addr;
+ info->imr &= ~MCFUART_UIR_TXREADY;
+ uartp[MCFUART_UIMR] = info->imr;
+ local_irq_restore(flags);
+}
+
+static void mcfrs_start(struct tty_struct *tty)
+{
+ volatile unsigned char *uartp;
+ struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
+ unsigned long flags;
+
+ if (serial_paranoia_check(info, tty->name, "mcfrs_start"))
+ return;
+
+ local_irq_save(flags);
+ if (info->xmit_cnt && info->xmit_buf) {
+ uartp = info->addr;
+ info->imr |= MCFUART_UIR_TXREADY;
+ uartp[MCFUART_UIMR] = info->imr;
+ }
+ local_irq_restore(flags);
+}
+
+/*
+ * ----------------------------------------------------------------------
+ *
+ * Here starts the interrupt handling routines. All of the following
+ * subroutines are declared as inline and are folded into
+ * mcfrs_interrupt(). They were separated out for readability's sake.
+ *
+ * Note: mcfrs_interrupt() is a "fast" interrupt, which means that it
+ * runs with interrupts turned off. People who may want to modify
+ * mcfrs_interrupt() should try to keep the interrupt handler as fast as
+ * possible. After you are done making modifications, it is not a bad
+ * idea to do:
+ *
+ * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c
+ *
+ * and look at the resulting assemble code in serial.s.
+ *
+ * - Ted Ts'o (tytso@mit.edu), 7-Mar-93
+ * -----------------------------------------------------------------------
+ */
+
+static inline void receive_chars(struct mcf_serial *info)
+{
+ volatile unsigned char *uartp;
+ struct tty_struct *tty = info->tty;
+ unsigned char status, ch;
+
+ if (!tty)
+ return;
+
+ uartp = info->addr;
+
+ while ((status = uartp[MCFUART_USR]) & MCFUART_USR_RXREADY) {
+
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+ break;
+
+ ch = uartp[MCFUART_URB];
+ info->stats.rx++;
+
+#ifdef CONFIG_MAGIC_SYSRQ
+ if (mcfrs_console_inited && (info->line == mcfrs_console_port)) {
+ if (magic_sysrq_key(ch))
+ continue;
+ }
+#endif
+
+ tty->flip.count++;
+ if (status & MCFUART_USR_RXERR) {
+ uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETERR;
+ if (status & MCFUART_USR_RXBREAK) {
+ info->stats.rxbreak++;
+ *tty->flip.flag_buf_ptr++ = TTY_BREAK;
+ } else if (status & MCFUART_USR_RXPARITY) {
+ info->stats.rxparity++;
+ *tty->flip.flag_buf_ptr++ = TTY_PARITY;
+ } else if (status & MCFUART_USR_RXOVERRUN) {
+ info->stats.rxoverrun++;
+ *tty->flip.flag_buf_ptr++ = TTY_OVERRUN;
+ } else if (status & MCFUART_USR_RXFRAMING) {
+ info->stats.rxframing++;
+ *tty->flip.flag_buf_ptr++ = TTY_FRAME;
+ } else {
+ /* This should never happen... */
+ *tty->flip.flag_buf_ptr++ = 0;
+ }
+ } else {
+ *tty->flip.flag_buf_ptr++ = 0;
+ }
+ *tty->flip.char_buf_ptr++ = ch;
+ }
+
+ schedule_work(&tty->flip.work);
+ return;
+}
+
+static inline void transmit_chars(struct mcf_serial *info)
+{
+ volatile unsigned char *uartp;
+
+ uartp = info->addr;
+
+ if (info->x_char) {
+ /* Send special char - probably flow control */
+ uartp[MCFUART_UTB] = info->x_char;
+ info->x_char = 0;
+ info->stats.tx++;
+ }
+
+ if ((info->xmit_cnt <= 0) || info->tty->stopped) {
+ info->imr &= ~MCFUART_UIR_TXREADY;
+ uartp[MCFUART_UIMR] = info->imr;
+ return;
+ }
+
+ while (uartp[MCFUART_USR] & MCFUART_USR_TXREADY) {
+ uartp[MCFUART_UTB] = info->xmit_buf[info->xmit_tail++];
+ info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
+ info->stats.tx++;
+ if (--info->xmit_cnt <= 0)
+ break;
+ }
+
+ if (info->xmit_cnt < WAKEUP_CHARS)
+ schedule_work(&info->tqueue);
+ return;
+}
+
+/*
+ * This is the serial driver's generic interrupt routine
+ */
+irqreturn_t mcfrs_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct mcf_serial *info;
+ unsigned char isr;
+
+ info = &mcfrs_table[(irq - IRQBASE)];
+ isr = info->addr[MCFUART_UISR] & info->imr;
+
+ if (isr & MCFUART_UIR_RXREADY)
+ receive_chars(info);
+ if (isr & MCFUART_UIR_TXREADY)
+ transmit_chars(info);
+ return IRQ_HANDLED;
+}
+
+/*
+ * -------------------------------------------------------------------
+ * Here ends the serial interrupt routines.
+ * -------------------------------------------------------------------
+ */
+
+static void mcfrs_offintr(void *private)
+{
+ struct mcf_serial *info = (struct mcf_serial *) private;
+ struct tty_struct *tty;
+
+ tty = info->tty;
+ if (!tty)
+ return;
+ tty_wakeup(tty);
+}
+
+
+/*
+ * Change of state on a DCD line.
+ */
+void mcfrs_modem_change(struct mcf_serial *info, int dcd)
+{
+ if (info->count == 0)
+ return;
+
+ if (info->flags & ASYNC_CHECK_CD) {
+ if (dcd)
+ wake_up_interruptible(&info->open_wait);
+ else
+ schedule_work(&info->tqueue_hangup);
+ }
+}
+
+
+#ifdef MCFPP_DCD0
+
+unsigned short mcfrs_ppstatus;
+
+/*
+ * This subroutine is called when the RS_TIMER goes off. It is used
+ * to monitor the state of the DCD lines - since they have no edge
+ * sensors and interrupt generators.
+ */
+static void mcfrs_timer(void)
+{
+ unsigned int ppstatus, dcdval, i;
+
+ ppstatus = mcf_getppdata() & (MCFPP_DCD0 | MCFPP_DCD1);
+
+ if (ppstatus != mcfrs_ppstatus) {
+ for (i = 0; (i < 2); i++) {
+ dcdval = (i ? MCFPP_DCD1 : MCFPP_DCD0);
+ if ((ppstatus & dcdval) != (mcfrs_ppstatus & dcdval)) {
+ mcfrs_modem_change(&mcfrs_table[i],
+ ((ppstatus & dcdval) ? 0 : 1));
+ }
+ }
+ }
+ mcfrs_ppstatus = ppstatus;
+
+ /* Re-arm timer */
+ mcfrs_timer_struct.expires = jiffies + HZ/25;
+ add_timer(&mcfrs_timer_struct);
+}
+
+#endif /* MCFPP_DCD0 */
+
+
+/*
+ * This routine is called from the scheduler tqueue when the interrupt
+ * routine has signalled that a hangup has occurred. The path of
+ * hangup processing is:
+ *
+ * serial interrupt routine -> (scheduler tqueue) ->
+ * do_serial_hangup() -> tty->hangup() -> mcfrs_hangup()
+ *
+ */
+static void do_serial_hangup(void *private)
+{
+ struct mcf_serial *info = (struct mcf_serial *) private;
+ struct tty_struct *tty;
+
+ tty = info->tty;
+ if (!tty)
+ return;
+
+ tty_hangup(tty);
+}
+
+static int startup(struct mcf_serial * info)
+{
+ volatile unsigned char *uartp;
+ unsigned long flags;
+
+ if (info->flags & ASYNC_INITIALIZED)
+ return 0;
+
+ if (!info->xmit_buf) {
+ info->xmit_buf = (unsigned char *) __get_free_page(GFP_KERNEL);
+ if (!info->xmit_buf)
+ return -ENOMEM;
+ }
+
+ local_irq_save(flags);
+
+#ifdef SERIAL_DEBUG_OPEN
+ printk("starting up ttyS%d (irq %d)...\n", info->line, info->irq);
+#endif
+
+ /*
+ * Reset UART, get it into known state...
+ */
+ uartp = info->addr;
+ uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
+ uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
+ mcfrs_setsignals(info, 1, 1);
+
+ if (info->tty)
+ clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+
+ /*
+ * and set the speed of the serial port
+ */
+ mcfrs_change_speed(info);
+
+ /*
+ * Lastly enable the UART transmitter and receiver, and
+ * interrupt enables.
+ */
+ info->imr = MCFUART_UIR_RXREADY;
+ uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;
+ uartp[MCFUART_UIMR] = info->imr;
+
+ info->flags |= ASYNC_INITIALIZED;
+ local_irq_restore(flags);
+ return 0;
+}
+
+/*
+ * This routine will shutdown a serial port; interrupts are disabled, and
+ * DTR is dropped if the hangup on close termio flag is on.
+ */
+static void shutdown(struct mcf_serial * info)
+{
+ volatile unsigned char *uartp;
+ unsigned long flags;
+
+ if (!(info->flags & ASYNC_INITIALIZED))
+ return;
+
+#ifdef SERIAL_DEBUG_OPEN
+ printk("Shutting down serial port %d (irq %d)....\n", info->line,
+ info->irq);
+#endif
+
+ local_irq_save(flags);
+
+ uartp = info->addr;
+ uartp[MCFUART_UIMR] = 0; /* mask all interrupts */
+ uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
+ uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
+
+ if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
+ mcfrs_setsignals(info, 0, 0);
+
+ if (info->xmit_buf) {
+ free_page((unsigned long) info->xmit_buf);
+ info->xmit_buf = 0;
+ }
+
+ if (info->tty)
+ set_bit(TTY_IO_ERROR, &info->tty->flags);
+
+ info->flags &= ~ASYNC_INITIALIZED;
+ local_irq_restore(flags);
+}
+
+
+/*
+ * This routine is called to set the UART divisor registers to match
+ * the specified baud rate for a serial port.
+ */
+static void mcfrs_change_speed(struct mcf_serial *info)
+{
+ volatile unsigned char *uartp;
+ unsigned int baudclk, cflag;
+ unsigned long flags;
+ unsigned char mr1, mr2;
+ int i;
+#ifdef CONFIG_M5272
+ unsigned int fraction;
+#endif
+
+ if (!info->tty || !info->tty->termios)
+ return;
+ cflag = info->tty->termios->c_cflag;
+ if (info->addr == 0)
+ return;
+
+#if 0
+ printk("%s(%d): mcfrs_change_speed()\n", __FILE__, __LINE__);
+#endif
+
+ i = cflag & CBAUD;
+ if (i & CBAUDEX) {
+ i &= ~CBAUDEX;
+ if (i < 1 || i > 4)
+ info->tty->termios->c_cflag &= ~CBAUDEX;
+ else
+ i += 15;
+ }
+ if (i == 0) {
+ mcfrs_setsignals(info, 0, -1);
+ return;
+ }
+
+ /* compute the baudrate clock */
+#ifdef CONFIG_M5272
+ /*
+ * For the MCF5272, also compute the baudrate fraction.
+ */
+ baudclk = (MCF_BUSCLK / mcfrs_baud_table[i]) / 32;
+ fraction = MCF_BUSCLK - (baudclk * 32 * mcfrs_baud_table[i]);
+ fraction *= 16;
+ fraction /= (32 * mcfrs_baud_table[i]);
+#else
+ baudclk = ((MCF_BUSCLK / mcfrs_baud_table[i]) + 16) / 32;
+#endif
+
+ info->baud = mcfrs_baud_table[i];
+
+ mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR;
+ mr2 = 0;
+
+ switch (cflag & CSIZE) {
+ case CS5: mr1 |= MCFUART_MR1_CS5; break;
+ case CS6: mr1 |= MCFUART_MR1_CS6; break;
+ case CS7: mr1 |= MCFUART_MR1_CS7; break;
+ case CS8:
+ default: mr1 |= MCFUART_MR1_CS8; break;
+ }
+
+ if (cflag & PARENB) {
+ if (cflag & CMSPAR) {
+ if (cflag & PARODD)
+ mr1 |= MCFUART_MR1_PARITYMARK;
+ else
+ mr1 |= MCFUART_MR1_PARITYSPACE;
+ } else {
+ if (cflag & PARODD)
+ mr1 |= MCFUART_MR1_PARITYODD;
+ else
+ mr1 |= MCFUART_MR1_PARITYEVEN;
+ }
+ } else {
+ mr1 |= MCFUART_MR1_PARITYNONE;
+ }
+
+ if (cflag & CSTOPB)
+ mr2 |= MCFUART_MR2_STOP2;
+ else
+ mr2 |= MCFUART_MR2_STOP1;
+
+ if (cflag & CRTSCTS) {
+ mr1 |= MCFUART_MR1_RXRTS;
+ mr2 |= MCFUART_MR2_TXCTS;
+ }
+
+ if (cflag & CLOCAL)
+ info->flags &= ~ASYNC_CHECK_CD;
+ else
+ info->flags |= ASYNC_CHECK_CD;
+
+ uartp = info->addr;
+
+ local_irq_save(flags);
+#if 0
+ printk("%s(%d): mr1=%x mr2=%x baudclk=%x\n", __FILE__, __LINE__,
+ mr1, mr2, baudclk);
+#endif
+ /*
+ Note: pg 12-16 of MCF5206e User's Manual states that a
+ software reset should be performed prior to changing
+ UMR1,2, UCSR, UACR, bit 7
+ */
+ uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
+ uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
+ uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR; /* reset MR pointer */
+ uartp[MCFUART_UMR] = mr1;
+ uartp[MCFUART_UMR] = mr2;
+ uartp[MCFUART_UBG1] = (baudclk & 0xff00) >> 8; /* set msb byte */
+ uartp[MCFUART_UBG2] = (baudclk & 0xff); /* set lsb byte */
+#ifdef CONFIG_M5272
+ uartp[MCFUART_UFPD] = (fraction & 0xf); /* set fraction */
+#endif
+ uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER;
+ uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;
+ mcfrs_setsignals(info, 1, -1);
+ local_irq_restore(flags);
+ return;
+}
+
+static void mcfrs_flush_chars(struct tty_struct *tty)
+{
+ volatile unsigned char *uartp;
+ struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
+ unsigned long flags;
+
+ if (serial_paranoia_check(info, tty->name, "mcfrs_flush_chars"))
+ return;
+
+ uartp = (volatile unsigned char *) info->addr;
+
+ /*
+ * re-enable receiver interrupt
+ */
+ local_irq_save(flags);
+ if ((!(info->imr & MCFUART_UIR_RXREADY)) &&
+ (info->flags & ASYNC_INITIALIZED) ) {
+ info->imr |= MCFUART_UIR_RXREADY;
+ uartp[MCFUART_UIMR] = info->imr;
+ }
+ local_irq_restore(flags);
+
+ if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
+ !info->xmit_buf)
+ return;
+
+ /* Enable transmitter */
+ local_irq_save(flags);
+ info->imr |= MCFUART_UIR_TXREADY;
+ uartp[MCFUART_UIMR] = info->imr;
+ local_irq_restore(flags);
+}
+
+static int mcfrs_write(struct tty_struct * tty,
+ const unsigned char *buf, int count)
+{
+ volatile unsigned char *uartp;
+ struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
+ unsigned long flags;
+ int c, total = 0;
+
+#if 0
+ printk("%s(%d): mcfrs_write(tty=%x,buf=%x,count=%d)\n",
+ __FILE__, __LINE__, (int)tty, (int)buf, count);
+#endif
+
+ if (serial_paranoia_check(info, tty->name, "mcfrs_write"))
+ return 0;
+
+ if (!tty || !info->xmit_buf)
+ return 0;
+
+ local_save_flags(flags);
+ while (1) {
+ local_irq_disable();
+ c = min(count, (int) min(((int)SERIAL_XMIT_SIZE) - info->xmit_cnt - 1,
+ ((int)SERIAL_XMIT_SIZE) - info->xmit_head));
+ local_irq_restore(flags);
+
+ if (c <= 0)
+ break;
+
+ memcpy(info->xmit_buf + info->xmit_head, buf, c);
+
+ local_irq_disable();
+ info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1);
+ info->xmit_cnt += c;
+ local_irq_restore(flags);
+
+ buf += c;
+ count -= c;
+ total += c;
+ }
+
+ local_irq_disable();
+ uartp = info->addr;
+ info->imr |= MCFUART_UIR_TXREADY;
+ uartp[MCFUART_UIMR] = info->imr;
+ local_irq_restore(flags);
+
+ return total;
+}
+
+static int mcfrs_write_room(struct tty_struct *tty)
+{
+ struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
+ int ret;
+
+ if (serial_paranoia_check(info, tty->name, "mcfrs_write_room"))
+ return 0;
+ ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
+ if (ret < 0)
+ ret = 0;
+ return ret;
+}
+
+static int mcfrs_chars_in_buffer(struct tty_struct *tty)
+{
+ struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
+
+ if (serial_paranoia_check(info, tty->name, "mcfrs_chars_in_buffer"))
+ return 0;
+ return info->xmit_cnt;
+}
+
+static void mcfrs_flush_buffer(struct tty_struct *tty)
+{
+ struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
+ unsigned long flags;
+
+ if (serial_paranoia_check(info, tty->name, "mcfrs_flush_buffer"))
+ return;
+
+ local_irq_save(flags);
+ info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
+ local_irq_restore(flags);
+
+ tty_wakeup(tty);
+}
+
+/*
+ * ------------------------------------------------------------
+ * mcfrs_throttle()
+ *
+ * This routine is called by the upper-layer tty layer to signal that
+ * incoming characters should be throttled.
+ * ------------------------------------------------------------
+ */
+static void mcfrs_throttle(struct tty_struct * tty)
+{
+ struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
+#ifdef SERIAL_DEBUG_THROTTLE
+ char buf[64];
+
+ printk("throttle %s: %d....\n", _tty_name(tty, buf),
+ tty->ldisc.chars_in_buffer(tty));
+#endif
+
+ if (serial_paranoia_check(info, tty->name, "mcfrs_throttle"))
+ return;
+
+ if (I_IXOFF(tty))
+ info->x_char = STOP_CHAR(tty);
+
+ /* Turn off RTS line (do this atomic) */
+}
+
+static void mcfrs_unthrottle(struct tty_struct * tty)
+{
+ struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
+#ifdef SERIAL_DEBUG_THROTTLE
+ char buf[64];
+
+ printk("unthrottle %s: %d....\n", _tty_name(tty, buf),
+ tty->ldisc.chars_in_buffer(tty));
+#endif
+
+ if (serial_paranoia_check(info, tty->name, "mcfrs_unthrottle"))
+ return;
+
+ if (I_IXOFF(tty)) {
+ if (info->x_char)
+ info->x_char = 0;
+ else
+ info->x_char = START_CHAR(tty);
+ }
+
+ /* Assert RTS line (do this atomic) */
+}
+
+/*
+ * ------------------------------------------------------------
+ * mcfrs_ioctl() and friends
+ * ------------------------------------------------------------
+ */
+
+static int get_serial_info(struct mcf_serial * info,
+ struct serial_struct * retinfo)
+{
+ struct serial_struct tmp;
+
+ if (!retinfo)
+ return -EFAULT;
+ memset(&tmp, 0, sizeof(tmp));
+ tmp.type = info->type;
+ tmp.line = info->line;
+ tmp.port = (unsigned int) info->addr;
+ tmp.irq = info->irq;
+ tmp.flags = info->flags;
+ tmp.baud_base = info->baud_base;
+ tmp.close_delay = info->close_delay;
+ tmp.closing_wait = info->closing_wait;
+ tmp.custom_divisor = info->custom_divisor;
+ return copy_to_user(retinfo,&tmp,sizeof(*retinfo)) ? -EFAULT : 0;
+}
+
+static int set_serial_info(struct mcf_serial * info,
+ struct serial_struct * new_info)
+{
+ struct serial_struct new_serial;
+ struct mcf_serial old_info;
+ int retval = 0;
+
+ if (!new_info)
+ return -EFAULT;
+ if (copy_from_user(&new_serial,new_info,sizeof(new_serial)))
+ return -EFAULT;
+ old_info = *info;
+
+ if (!capable(CAP_SYS_ADMIN)) {
+ if ((new_serial.baud_base != info->baud_base) ||
+ (new_serial.type != info->type) ||
+ (new_serial.close_delay != info->close_delay) ||
+ ((new_serial.flags & ~ASYNC_USR_MASK) !=
+ (info->flags & ~ASYNC_USR_MASK)))
+ return -EPERM;
+ info->flags = ((info->flags & ~ASYNC_USR_MASK) |
+ (new_serial.flags & ASYNC_USR_MASK));
+ info->custom_divisor = new_serial.custom_divisor;
+ goto check_and_exit;
+ }
+
+ if (info->count > 1)
+ return -EBUSY;
+
+ /*
+ * OK, past this point, all the error checking has been done.
+ * At this point, we start making changes.....
+ */
+
+ info->baud_base = new_serial.baud_base;
+ info->flags = ((info->flags & ~ASYNC_FLAGS) |
+ (new_serial.flags & ASYNC_FLAGS));
+ info->type = new_serial.type;
+ info->close_delay = new_serial.close_delay;
+ info->closing_wait = new_serial.closing_wait;
+
+check_and_exit:
+ retval = startup(info);
+ return retval;
+}
+
+/*
+ * get_lsr_info - get line status register info
+ *
+ * Purpose: Let user call ioctl() to get info when the UART physically
+ * is emptied. On bus types like RS485, the transmitter must
+ * release the bus after transmitting. This must be done when
+ * the transmit shift register is empty, not be done when the
+ * transmit holding register is empty. This functionality
+ * allows an RS485 driver to be written in user space.
+ */
+static int get_lsr_info(struct mcf_serial * info, unsigned int *value)
+{
+ volatile unsigned char *uartp;
+ unsigned long flags;
+ unsigned char status;
+
+ local_irq_save(flags);
+ uartp = info->addr;
+ status = (uartp[MCFUART_USR] & MCFUART_USR_TXEMPTY) ? TIOCSER_TEMT : 0;
+ local_irq_restore(flags);
+
+ return put_user(status,value);
+}
+
+/*
+ * This routine sends a break character out the serial port.
+ */
+static void send_break( struct mcf_serial * info, int duration)
+{
+ volatile unsigned char *uartp;
+ unsigned long flags;
+
+ if (!info->addr)
+ return;
+ set_current_state(TASK_INTERRUPTIBLE);
+ uartp = info->addr;
+
+ local_irq_save(flags);
+ uartp[MCFUART_UCR] = MCFUART_UCR_CMDBREAKSTART;
+ schedule_timeout(duration);
+ uartp[MCFUART_UCR] = MCFUART_UCR_CMDBREAKSTOP;
+ local_irq_restore(flags);
+}
+
+static int mcfrs_tiocmget(struct tty_struct *tty, struct file *file)
+{
+ struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
+
+ if (serial_paranoia_check(info, tty->name, "mcfrs_ioctl"))
+ return -ENODEV;
+ if (tty->flags & (1 << TTY_IO_ERROR))
+ return -EIO;
+
+ return mcfrs_getsignals(info);
+}
+
+static int mcfrs_tiocmset(struct tty_struct *tty, struct file *file,
+ unsigned int set, unsigned int clear)
+{
+ struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
+ int rts = -1, dtr = -1;
+
+ if (serial_paranoia_check(info, tty->name, "mcfrs_ioctl"))
+ return -ENODEV;
+ if (tty->flags & (1 << TTY_IO_ERROR))
+ return -EIO;
+
+ if (set & TIOCM_RTS)
+ rts = 1;
+ if (set & TIOCM_DTR)
+ dtr = 1;
+ if (clear & TIOCM_RTS)
+ rts = 0;
+ if (clear & TIOCM_DTR)
+ dtr = 0;
+
+ mcfrs_setsignals(info, dtr, rts);
+
+ return 0;
+}
+
+static int mcfrs_ioctl(struct tty_struct *tty, struct file * file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
+ int retval, error;
+
+ if (serial_paranoia_check(info, tty->name, "mcfrs_ioctl"))
+ return -ENODEV;
+
+ if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
+ (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) &&
+ (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) {
+ if (tty->flags & (1 << TTY_IO_ERROR))
+ return -EIO;
+ }
+
+ switch (cmd) {
+ case TCSBRK: /* SVID version: non-zero arg --> no break */
+ retval = tty_check_change(tty);
+ if (retval)
+ return retval;
+ tty_wait_until_sent(tty, 0);
+ if (!arg)
+ send_break(info, HZ/4); /* 1/4 second */
+ return 0;
+ case TCSBRKP: /* support for POSIX tcsendbreak() */
+ retval = tty_check_change(tty);
+ if (retval)
+ return retval;
+ tty_wait_until_sent(tty, 0);
+ send_break(info, arg ? arg*(HZ/10) : HZ/4);
+ return 0;
+ case TIOCGSOFTCAR:
+ error = put_user(C_CLOCAL(tty) ? 1 : 0,
+ (unsigned long *) arg);
+ if (error)
+ return error;
+ return 0;
+ case TIOCSSOFTCAR:
+ get_user(arg, (unsigned long *) arg);
+ tty->termios->c_cflag =
+ ((tty->termios->c_cflag & ~CLOCAL) |
+ (arg ? CLOCAL : 0));
+ return 0;
+ case TIOCGSERIAL:
+ if (access_ok(VERIFY_WRITE, (void *) arg,
+ sizeof(struct serial_struct)))
+ return get_serial_info(info,
+ (struct serial_struct *) arg);
+ return -EFAULT;
+ case TIOCSSERIAL:
+ return set_serial_info(info,
+ (struct serial_struct *) arg);
+ case TIOCSERGETLSR: /* Get line status register */
+ if (access_ok(VERIFY_WRITE, (void *) arg,
+ sizeof(unsigned int)))
+ return get_lsr_info(info, (unsigned int *) arg);
+ return -EFAULT;
+ case TIOCSERGSTRUCT:
+ error = copy_to_user((struct mcf_serial *) arg,
+ info, sizeof(struct mcf_serial));
+ if (error)
+ return -EFAULT;
+ return 0;
+
+#ifdef TIOCSET422
+ case TIOCSET422: {
+ unsigned int val;
+ get_user(val, (unsigned int *) arg);
+ mcf_setpa(MCFPP_PA11, (val ? 0 : MCFPP_PA11));
+ break;
+ }
+ case TIOCGET422: {
+ unsigned int val;
+ val = (mcf_getpa() & MCFPP_PA11) ? 0 : 1;
+ put_user(val, (unsigned int *) arg);
+ break;
+ }
+#endif
+
+ default:
+ return -ENOIOCTLCMD;
+ }
+ return 0;
+}
+
+static void mcfrs_set_termios(struct tty_struct *tty, struct termios *old_termios)
+{
+ struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
+
+ if (tty->termios->c_cflag == old_termios->c_cflag)
+ return;
+
+ mcfrs_change_speed(info);
+
+ if ((old_termios->c_cflag & CRTSCTS) &&
+ !(tty->termios->c_cflag & CRTSCTS)) {
+ tty->hw_stopped = 0;
+ mcfrs_setsignals(info, -1, 1);
+#if 0
+ mcfrs_start(tty);
+#endif
+ }
+}
+
+/*
+ * ------------------------------------------------------------
+ * mcfrs_close()
+ *
+ * This routine is called when the serial port gets closed. First, we
+ * wait for the last remaining data to be sent. Then, we unlink its
+ * S structure from the interrupt chain if necessary, and we free
+ * that IRQ if nothing is left in the chain.
+ * ------------------------------------------------------------
+ */
+static void mcfrs_close(struct tty_struct *tty, struct file * filp)
+{
+ volatile unsigned char *uartp;
+ struct mcf_serial *info = (struct mcf_serial *)tty->driver_data;
+ unsigned long flags;
+
+ if (!info || serial_paranoia_check(info, tty->name, "mcfrs_close"))
+ return;
+
+ local_irq_save(flags);
+
+ if (tty_hung_up_p(filp)) {
+ local_irq_restore(flags);
+ return;
+ }
+
+#ifdef SERIAL_DEBUG_OPEN
+ printk("mcfrs_close ttyS%d, count = %d\n", info->line, info->count);
+#endif
+ if ((tty->count == 1) && (info->count != 1)) {
+ /*
+ * Uh, oh. tty->count is 1, which means that the tty
+ * structure will be freed. Info->count should always
+ * be one in these conditions. If it's greater than
+ * one, we've got real problems, since it means the
+ * serial port won't be shutdown.
+ */
+ printk("MCFRS: bad serial port count; tty->count is 1, "
+ "info->count is %d\n", info->count);
+ info->count = 1;
+ }
+ if (--info->count < 0) {
+ printk("MCFRS: bad serial port count for ttyS%d: %d\n",
+ info->line, info->count);
+ info->count = 0;
+ }
+ if (info->count) {
+ local_irq_restore(flags);
+ return;
+ }
+ info->flags |= ASYNC_CLOSING;
+
+ /*
+ * Now we wait for the transmit buffer to clear; and we notify
+ * the line discipline to only process XON/XOFF characters.
+ */
+ tty->closing = 1;
+ if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE)
+ tty_wait_until_sent(tty, info->closing_wait);
+
+ /*
+ * At this point we stop accepting input. To do this, we
+ * disable the receive line status interrupts, and tell the
+ * interrupt driver to stop checking the data ready bit in the
+ * line status register.
+ */
+ info->imr &= ~MCFUART_UIR_RXREADY;
+ uartp = info->addr;
+ uartp[MCFUART_UIMR] = info->imr;
+
+#if 0
+ /* FIXME: do we need to keep this enabled for console?? */
+ if (mcfrs_console_inited && (mcfrs_console_port == info->line)) {
+ /* Do not disable the UART */ ;
+ } else
+#endif
+ shutdown(info);
+ if (tty->driver->flush_buffer)
+ tty->driver->flush_buffer(tty);
+ tty_ldisc_flush(tty);
+
+ tty->closing = 0;
+ info->event = 0;
+ info->tty = 0;
+#if 0
+ if (tty->ldisc.num != ldiscs[N_TTY].num) {
+ if (tty->ldisc.close)
+ (tty->ldisc.close)(tty);
+ tty->ldisc = ldiscs[N_TTY];
+ tty->termios->c_line = N_TTY;
+ if (tty->ldisc.open)
+ (tty->ldisc.open)(tty);
+ }
+#endif
+ if (info->blocked_open) {
+ if (info->close_delay) {
+ msleep_interruptible(jiffies_to_msecs(info->close_delay));
+ }
+ wake_up_interruptible(&info->open_wait);
+ }
+ info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+ wake_up_interruptible(&info->close_wait);
+ local_irq_restore(flags);
+}
+
+/*
+ * mcfrs_wait_until_sent() --- wait until the transmitter is empty
+ */
+static void
+mcfrs_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+#ifdef CONFIG_M5272
+#define MCF5272_FIFO_SIZE 25 /* fifo size + shift reg */
+
+ struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
+ volatile unsigned char *uartp;
+ unsigned long orig_jiffies, fifo_time, char_time, fifo_cnt;
+
+ if (serial_paranoia_check(info, tty->name, "mcfrs_wait_until_sent"))
+ return;
+
+ orig_jiffies = jiffies;
+
+ /*
+ * Set the check interval to be 1/5 of the approximate time
+ * to send the entire fifo, and make it at least 1. The check
+ * interval should also be less than the timeout.
+ *
+ * Note: we have to use pretty tight timings here to satisfy
+ * the NIST-PCTS.
+ */
+ fifo_time = (MCF5272_FIFO_SIZE * HZ * 10) / info->baud;
+ char_time = fifo_time / 5;
+ if (char_time == 0)
+ char_time = 1;
+ if (timeout && timeout < char_time)
+ char_time = timeout;
+
+ /*
+ * Clamp the timeout period at 2 * the time to empty the
+ * fifo. Just to be safe, set the minimum at .5 seconds.
+ */
+ fifo_time *= 2;
+ if (fifo_time < (HZ/2))
+ fifo_time = HZ/2;
+ if (!timeout || timeout > fifo_time)
+ timeout = fifo_time;
+
+ /*
+ * Account for the number of bytes in the UART
+ * transmitter FIFO plus any byte being shifted out.
+ */
+ uartp = (volatile unsigned char *) info->addr;
+ for (;;) {
+ fifo_cnt = (uartp[MCFUART_UTF] & MCFUART_UTF_TXB);
+ if ((uartp[MCFUART_USR] & (MCFUART_USR_TXREADY|
+ MCFUART_USR_TXEMPTY)) ==
+ MCFUART_USR_TXREADY)
+ fifo_cnt++;
+ if (fifo_cnt == 0)
+ break;
+ msleep_interruptible(jiffies_to_msecs(char_time));
+ if (signal_pending(current))
+ break;
+ if (timeout && time_after(jiffies, orig_jiffies + timeout))
+ break;
+ }
+#else
+ /*
+ * For the other coldfire models, assume all data has been sent
+ */
+#endif
+}
+
+/*
+ * mcfrs_hangup() --- called by tty_hangup() when a hangup is signaled.
+ */
+void mcfrs_hangup(struct tty_struct *tty)
+{
+ struct mcf_serial * info = (struct mcf_serial *)tty->driver_data;
+
+ if (serial_paranoia_check(info, tty->name, "mcfrs_hangup"))
+ return;
+
+ mcfrs_flush_buffer(tty);
+ shutdown(info);
+ info->event = 0;
+ info->count = 0;
+ info->flags &= ~ASYNC_NORMAL_ACTIVE;
+ info->tty = 0;
+ wake_up_interruptible(&info->open_wait);
+}
+
+/*
+ * ------------------------------------------------------------
+ * mcfrs_open() and friends
+ * ------------------------------------------------------------
+ */
+static int block_til_ready(struct tty_struct *tty, struct file * filp,
+ struct mcf_serial *info)
+{
+ DECLARE_WAITQUEUE(wait, current);
+ int retval;
+ int do_clocal = 0;
+
+ /*
+ * If the device is in the middle of being closed, then block
+ * until it's done, and then try again.
+ */
+ if (info->flags & ASYNC_CLOSING) {
+ interruptible_sleep_on(&info->close_wait);
+#ifdef SERIAL_DO_RESTART
+ if (info->flags & ASYNC_HUP_NOTIFY)
+ return -EAGAIN;
+ else
+ return -ERESTARTSYS;
+#else
+ return -EAGAIN;
+#endif
+ }
+
+ /*
+ * If non-blocking mode is set, or the port is not enabled,
+ * then make the check up front and then exit.
+ */
+ if ((filp->f_flags & O_NONBLOCK) ||
+ (tty->flags & (1 << TTY_IO_ERROR))) {
+ info->flags |= ASYNC_NORMAL_ACTIVE;
+ return 0;
+ }
+
+ if (tty->termios->c_cflag & CLOCAL)
+ do_clocal = 1;
+
+ /*
+ * Block waiting for the carrier detect and the line to become
+ * free (i.e., not in use by the callout). While we are in
+ * this loop, info->count is dropped by one, so that
+ * mcfrs_close() knows when to free things. We restore it upon
+ * exit, either normal or abnormal.
+ */
+ retval = 0;
+ add_wait_queue(&info->open_wait, &wait);
+#ifdef SERIAL_DEBUG_OPEN
+ printk("block_til_ready before block: ttyS%d, count = %d\n",
+ info->line, info->count);
+#endif
+ info->count--;
+ info->blocked_open++;
+ while (1) {
+ local_irq_disable();
+ mcfrs_setsignals(info, 1, 1);
+ local_irq_enable();
+ current->state = TASK_INTERRUPTIBLE;
+ if (tty_hung_up_p(filp) ||
+ !(info->flags & ASYNC_INITIALIZED)) {
+#ifdef SERIAL_DO_RESTART
+ if (info->flags & ASYNC_HUP_NOTIFY)
+ retval = -EAGAIN;
+ else
+ retval = -ERESTARTSYS;
+#else
+ retval = -EAGAIN;
+#endif
+ break;
+ }
+ if (!(info->flags & ASYNC_CLOSING) &&
+ (do_clocal || (mcfrs_getsignals(info) & TIOCM_CD)))
+ break;
+ if (signal_pending(current)) {
+ retval = -ERESTARTSYS;
+ break;
+ }
+#ifdef SERIAL_DEBUG_OPEN
+ printk("block_til_ready blocking: ttyS%d, count = %d\n",
+ info->line, info->count);
+#endif
+ schedule();
+ }
+ current->state = TASK_RUNNING;
+ remove_wait_queue(&info->open_wait, &wait);
+ if (!tty_hung_up_p(filp))
+ info->count++;
+ info->blocked_open--;
+#ifdef SERIAL_DEBUG_OPEN
+ printk("block_til_ready after blocking: ttyS%d, count = %d\n",
+ info->line, info->count);
+#endif
+ if (retval)
+ return retval;
+ info->flags |= ASYNC_NORMAL_ACTIVE;
+ return 0;
+}
+
+/*
+ * This routine is called whenever a serial port is opened. It
+ * enables interrupts for a serial port, linking in its structure into
+ * the IRQ chain. It also performs the serial-specific
+ * initialization for the tty structure.
+ */
+int mcfrs_open(struct tty_struct *tty, struct file * filp)
+{
+ struct mcf_serial *info;
+ int retval, line;
+
+ line = tty->index;
+ if ((line < 0) || (line >= NR_PORTS))
+ return -ENODEV;
+ info = mcfrs_table + line;
+ if (serial_paranoia_check(info, tty->name, "mcfrs_open"))
+ return -ENODEV;
+#ifdef SERIAL_DEBUG_OPEN
+ printk("mcfrs_open %s, count = %d\n", tty->name, info->count);
+#endif
+ info->count++;
+ tty->driver_data = info;
+ info->tty = tty;
+
+ /*
+ * Start up serial port
+ */
+ retval = startup(info);
+ if (retval)
+ return retval;
+
+ retval = block_til_ready(tty, filp, info);
+ if (retval) {
+#ifdef SERIAL_DEBUG_OPEN
+ printk("mcfrs_open returning after block_til_ready with %d\n",
+ retval);
+#endif
+ return retval;
+ }
+
+#ifdef SERIAL_DEBUG_OPEN
+ printk("mcfrs_open %s successful...\n", tty->name);
+#endif
+ return 0;
+}
+
+/*
+ * Based on the line number set up the internal interrupt stuff.
+ */
+static void mcfrs_irqinit(struct mcf_serial *info)
+{
+#if defined(CONFIG_M5272)
+ volatile unsigned long *icrp;
+ volatile unsigned long *portp;
+ volatile unsigned char *uartp;
+
+ uartp = info->addr;
+ icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR2);
+
+ switch (info->line) {
+ case 0:
+ *icrp = 0xe0000000;
+ break;
+ case 1:
+ *icrp = 0x0e000000;
+ break;
+ default:
+ printk("MCFRS: don't know how to handle UART %d interrupt?\n",
+ info->line);
+ return;
+ }
+
+ /* Enable the output lines for the serial ports */
+ portp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PBCNT);
+ *portp = (*portp & ~0x000000ff) | 0x00000055;
+ portp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PDCNT);
+ *portp = (*portp & ~0x000003fc) | 0x000002a8;
+#elif defined(CONFIG_M527x) || defined(CONFIG_M528x)
+ volatile unsigned char *icrp, *uartp;
+ volatile unsigned long *imrp;
+
+ uartp = info->addr;
+
+ icrp = (volatile unsigned char *) (MCF_MBAR + MCFICM_INTC0 +
+ MCFINTC_ICR0 + MCFINT_UART0 + info->line);
+ *icrp = 0x33; /* UART0 with level 6, priority 3 */
+
+ imrp = (volatile unsigned long *) (MCF_MBAR + MCFICM_INTC0 +
+ MCFINTC_IMRL);
+ *imrp &= ~((1 << (info->irq - MCFINT_VECBASE)) | 1);
+#else
+ volatile unsigned char *icrp, *uartp;
+
+ switch (info->line) {
+ case 0:
+ icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_UART1ICR);
+ *icrp = /*MCFSIM_ICR_AUTOVEC |*/ MCFSIM_ICR_LEVEL6 |
+ MCFSIM_ICR_PRI1;
+ mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART1);
+ break;
+ case 1:
+ icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_UART2ICR);
+ *icrp = /*MCFSIM_ICR_AUTOVEC |*/ MCFSIM_ICR_LEVEL6 |
+ MCFSIM_ICR_PRI2;
+ mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_UART2);
+ break;
+ default:
+ printk("MCFRS: don't know how to handle UART %d interrupt?\n",
+ info->line);
+ return;
+ }
+
+ uartp = info->addr;
+ uartp[MCFUART_UIVR] = info->irq;
+#endif
+
+ /* Clear mask, so no surprise interrupts. */
+ uartp[MCFUART_UIMR] = 0;
+
+ if (request_irq(info->irq, mcfrs_interrupt, SA_INTERRUPT,
+ "ColdFire UART", NULL)) {
+ printk("MCFRS: Unable to attach ColdFire UART %d interrupt "
+ "vector=%d\n", info->line, info->irq);
+ }
+
+ return;
+}
+
+
+char *mcfrs_drivername = "ColdFire internal UART serial driver version 1.00\n";
+
+
+/*
+ * Serial stats reporting...
+ */
+int mcfrs_readproc(char *page, char **start, off_t off, int count,
+ int *eof, void *data)
+{
+ struct mcf_serial *info;
+ char str[20];
+ int len, sigs, i;
+
+ len = sprintf(page, mcfrs_drivername);
+ for (i = 0; (i < NR_PORTS); i++) {
+ info = &mcfrs_table[i];
+ len += sprintf((page + len), "%d: port:%x irq=%d baud:%d ",
+ i, (unsigned int) info->addr, info->irq, info->baud);
+ if (info->stats.rx || info->stats.tx)
+ len += sprintf((page + len), "tx:%d rx:%d ",
+ info->stats.tx, info->stats.rx);
+ if (info->stats.rxframing)
+ len += sprintf((page + len), "fe:%d ",
+ info->stats.rxframing);
+ if (info->stats.rxparity)
+ len += sprintf((page + len), "pe:%d ",
+ info->stats.rxparity);
+ if (info->stats.rxbreak)
+ len += sprintf((page + len), "brk:%d ",
+ info->stats.rxbreak);
+ if (info->stats.rxoverrun)
+ len += sprintf((page + len), "oe:%d ",
+ info->stats.rxoverrun);
+
+ str[0] = str[1] = 0;
+ if ((sigs = mcfrs_getsignals(info))) {
+ if (sigs & TIOCM_RTS)
+ strcat(str, "|RTS");
+ if (sigs & TIOCM_CTS)
+ strcat(str, "|CTS");
+ if (sigs & TIOCM_DTR)
+ strcat(str, "|DTR");
+ if (sigs & TIOCM_CD)
+ strcat(str, "|CD");
+ }
+
+ len += sprintf((page + len), "%s\n", &str[1]);
+ }
+
+ return(len);
+}
+
+
+/* Finally, routines used to initialize the serial driver. */
+
+static void show_serial_version(void)
+{
+ printk(mcfrs_drivername);
+}
+
+static struct tty_operations mcfrs_ops = {
+ .open = mcfrs_open,
+ .close = mcfrs_close,
+ .write = mcfrs_write,
+ .flush_chars = mcfrs_flush_chars,
+ .write_room = mcfrs_write_room,
+ .chars_in_buffer = mcfrs_chars_in_buffer,
+ .flush_buffer = mcfrs_flush_buffer,
+ .ioctl = mcfrs_ioctl,
+ .throttle = mcfrs_throttle,
+ .unthrottle = mcfrs_unthrottle,
+ .set_termios = mcfrs_set_termios,
+ .stop = mcfrs_stop,
+ .start = mcfrs_start,
+ .hangup = mcfrs_hangup,
+ .read_proc = mcfrs_readproc,
+ .wait_until_sent = mcfrs_wait_until_sent,
+ .tiocmget = mcfrs_tiocmget,
+ .tiocmset = mcfrs_tiocmset,
+};
+
+/* mcfrs_init inits the driver */
+static int __init
+mcfrs_init(void)
+{
+ struct mcf_serial *info;
+ unsigned long flags;
+ int i;
+
+ /* Setup base handler, and timer table. */
+#ifdef MCFPP_DCD0
+ init_timer(&mcfrs_timer_struct);
+ mcfrs_timer_struct.function = mcfrs_timer;
+ mcfrs_timer_struct.data = 0;
+ mcfrs_timer_struct.expires = jiffies + HZ/25;
+ add_timer(&mcfrs_timer_struct);
+ mcfrs_ppstatus = mcf_getppdata() & (MCFPP_DCD0 | MCFPP_DCD1);
+#endif
+ mcfrs_serial_driver = alloc_tty_driver(NR_PORTS);
+ if (!mcfrs_serial_driver)
+ return -ENOMEM;
+
+ show_serial_version();
+
+ /* Initialize the tty_driver structure */
+ mcfrs_serial_driver->owner = THIS_MODULE;
+ mcfrs_serial_driver->name = "ttyS";
+ mcfrs_serial_driver->devfs_name = "ttys/";
+ mcfrs_serial_driver->driver_name = "serial";
+ mcfrs_serial_driver->major = TTY_MAJOR;
+ mcfrs_serial_driver->minor_start = 64;
+ mcfrs_serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
+ mcfrs_serial_driver->subtype = SERIAL_TYPE_NORMAL;
+ mcfrs_serial_driver->init_termios = tty_std_termios;
+
+ mcfrs_serial_driver->init_termios.c_cflag =
+ mcfrs_console_cbaud | CS8 | CREAD | HUPCL | CLOCAL;
+ mcfrs_serial_driver->flags = TTY_DRIVER_REAL_RAW;
+
+ tty_set_operations(mcfrs_serial_driver, &mcfrs_ops);
+
+ if (tty_register_driver(mcfrs_serial_driver)) {
+ printk("MCFRS: Couldn't register serial driver\n");
+ put_tty_driver(mcfrs_serial_driver);
+ return(-EBUSY);
+ }
+
+ local_irq_save(flags);
+
+ /*
+ * Configure all the attached serial ports.
+ */
+ for (i = 0, info = mcfrs_table; (i < NR_PORTS); i++, info++) {
+ info->magic = SERIAL_MAGIC;
+ info->line = i;
+ info->tty = 0;
+ info->custom_divisor = 16;
+ info->close_delay = 50;
+ info->closing_wait = 3000;
+ info->x_char = 0;
+ info->event = 0;
+ info->count = 0;
+ info->blocked_open = 0;
+ INIT_WORK(&info->tqueue, mcfrs_offintr, info);
+ INIT_WORK(&info->tqueue_hangup, do_serial_hangup, info);
+ init_waitqueue_head(&info->open_wait);
+ init_waitqueue_head(&info->close_wait);
+
+ info->imr = 0;
+ mcfrs_setsignals(info, 0, 0);
+ mcfrs_irqinit(info);
+
+ printk("ttyS%d at 0x%04x (irq = %d)", info->line,
+ (unsigned int) info->addr, info->irq);
+ printk(" is a builtin ColdFire UART\n");
+ }
+
+ local_irq_restore(flags);
+ return 0;
+}
+
+module_init(mcfrs_init);
+
+/****************************************************************************/
+/* Serial Console */
+/****************************************************************************/
+
+/*
+ * Quick and dirty UART initialization, for console output.
+ */
+
+void mcfrs_init_console(void)
+{
+ volatile unsigned char *uartp;
+ unsigned int clk;
+
+ /*
+ * Reset UART, get it into known state...
+ */
+ uartp = (volatile unsigned char *) (MCF_MBAR +
+ (mcfrs_console_port ? MCFUART_BASE2 : MCFUART_BASE1));
+
+ uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
+ uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
+ uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR; /* reset MR pointer */
+
+ /*
+ * Set port for defined baud , 8 data bits, 1 stop bit, no parity.
+ */
+ uartp[MCFUART_UMR] = MCFUART_MR1_PARITYNONE | MCFUART_MR1_CS8;
+ uartp[MCFUART_UMR] = MCFUART_MR2_STOP1;
+
+ clk = ((MCF_BUSCLK / mcfrs_console_baud) + 16) / 32; /* set baud */
+ uartp[MCFUART_UBG1] = (clk & 0xff00) >> 8; /* set msb baud */
+ uartp[MCFUART_UBG2] = (clk & 0xff); /* set lsb baud */
+
+ uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER;
+ uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;
+
+ mcfrs_console_inited++;
+ return;
+}
+
+
+/*
+ * Setup for console. Argument comes from the boot command line.
+ */
+
+int mcfrs_console_setup(struct console *cp, char *arg)
+{
+ int i, n = CONSOLE_BAUD_RATE;
+
+ if (!cp)
+ return(-1);
+
+ if (!strncmp(cp->name, "ttyS", 4))
+ mcfrs_console_port = cp->index;
+ else if (!strncmp(cp->name, "cua", 3))
+ mcfrs_console_port = cp->index;
+ else
+ return(-1);
+
+ if (arg)
+ n = simple_strtoul(arg,NULL,0);
+ for (i = 0; i < MCFRS_BAUD_TABLE_SIZE; i++)
+ if (mcfrs_baud_table[i] == n)
+ break;
+ if (i < MCFRS_BAUD_TABLE_SIZE) {
+ mcfrs_console_baud = n;
+ mcfrs_console_cbaud = 0;
+ if (i > 15) {
+ mcfrs_console_cbaud |= CBAUDEX;
+ i -= 15;
+ }
+ mcfrs_console_cbaud |= i;
+ }
+ mcfrs_init_console(); /* make sure baud rate changes */
+ return(0);
+}
+
+
+static struct tty_driver *mcfrs_console_device(struct console *c, int *index)
+{
+ *index = c->index;
+ return mcfrs_serial_driver;
+}
+
+
+/*
+ * Output a single character, using UART polled mode.
+ * This is used for console output.
+ */
+
+void mcfrs_put_char(char ch)
+{
+ volatile unsigned char *uartp;
+ unsigned long flags;
+ int i;
+
+ uartp = (volatile unsigned char *) (MCF_MBAR +
+ (mcfrs_console_port ? MCFUART_BASE2 : MCFUART_BASE1));
+
+ local_irq_save(flags);
+ for (i = 0; (i < 0x10000); i++) {
+ if (uartp[MCFUART_USR] & MCFUART_USR_TXREADY)
+ break;
+ }
+ if (i < 0x10000) {
+ uartp[MCFUART_UTB] = ch;
+ for (i = 0; (i < 0x10000); i++)
+ if (uartp[MCFUART_USR] & MCFUART_USR_TXEMPTY)
+ break;
+ }
+ if (i >= 0x10000)
+ mcfrs_init_console(); /* try and get it back */
+ local_irq_restore(flags);
+
+ return;
+}
+
+
+/*
+ * rs_console_write is registered for printk output.
+ */
+
+void mcfrs_console_write(struct console *cp, const char *p, unsigned len)
+{
+ if (!mcfrs_console_inited)
+ mcfrs_init_console();
+ while (len-- > 0) {
+ if (*p == '\n')
+ mcfrs_put_char('\r');
+ mcfrs_put_char(*p++);
+ }
+}
+
+/*
+ * declare our consoles
+ */
+
+struct console mcfrs_console = {
+ .name = "ttyS",
+ .write = mcfrs_console_write,
+ .device = mcfrs_console_device,
+ .setup = mcfrs_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+
+static int __init mcfrs_console_init(void)
+{
+ register_console(&mcfrs_console);
+ return 0;
+}
+
+console_initcall(mcfrs_console_init);
+
+/****************************************************************************/
diff --git a/drivers/serial/mcfserial.h b/drivers/serial/mcfserial.h
new file mode 100644
index 00000000000..a2b28e8629f
--- /dev/null
+++ b/drivers/serial/mcfserial.h
@@ -0,0 +1,75 @@
+/*
+ * mcfserial.c -- serial driver for ColdFire internal UARTS.
+ *
+ * Copyright (c) 1999 Greg Ungerer <gerg@snapgear.com>
+ * Copyright (c) 2000-2001 Lineo, Inc. <www.lineo.com>
+ * Copyright (c) 2002 SnapGear Inc., <www.snapgear.com>
+ *
+ * Based on code from 68332serial.c which was:
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1998 TSHG
+ * Copyright (c) 1999 Rt-Control Inc. <jeff@uclinux.org>
+ */
+#ifndef _MCF_SERIAL_H
+#define _MCF_SERIAL_H
+
+#include <linux/config.h>
+#include <linux/serial.h>
+
+#ifdef __KERNEL__
+
+/*
+ * Define a local serial stats structure.
+ */
+
+struct mcf_stats {
+ unsigned int rx;
+ unsigned int tx;
+ unsigned int rxbreak;
+ unsigned int rxframing;
+ unsigned int rxparity;
+ unsigned int rxoverrun;
+};
+
+
+/*
+ * This is our internal structure for each serial port's state.
+ * Each serial port has one of these structures associated with it.
+ */
+
+struct mcf_serial {
+ int magic;
+ volatile unsigned char *addr; /* UART memory address */
+ int irq;
+ int flags; /* defined in tty.h */
+ int type; /* UART type */
+ struct tty_struct *tty;
+ unsigned char imr; /* Software imr register */
+ unsigned int baud;
+ int sigs;
+ int custom_divisor;
+ int x_char; /* xon/xoff character */
+ int baud_base;
+ int close_delay;
+ unsigned short closing_wait;
+ unsigned short closing_wait2;
+ unsigned long event;
+ int line;
+ int count; /* # of fd on device */
+ int blocked_open; /* # of blocked opens */
+ unsigned char *xmit_buf;
+ int xmit_head;
+ int xmit_tail;
+ int xmit_cnt;
+ struct mcf_stats stats;
+ struct work_struct tqueue;
+ struct work_struct tqueue_hangup;
+ wait_queue_head_t open_wait;
+ wait_queue_head_t close_wait;
+
+};
+
+#endif /* __KERNEL__ */
+
+#endif /* _MCF_SERIAL_H */
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
new file mode 100644
index 00000000000..2a5cf174ca3
--- /dev/null
+++ b/drivers/serial/mpc52xx_uart.c
@@ -0,0 +1,852 @@
+/*
+ * drivers/serial/mpc52xx_uart.c
+ *
+ * Driver for the PSC of the Freescale MPC52xx PSCs configured as UARTs.
+ *
+ * FIXME According to the usermanual the status bits in the status register
+ * are only updated when the peripherals access the FIFO and not when the
+ * CPU access them. So since we use this bits to know when we stop writing
+ * and reading, they may not be updated in-time and a race condition may
+ * exists. But I haven't be able to prove this and I don't care. But if
+ * any problem arises, it might worth checking. The TX/RX FIFO Stats
+ * registers should be used in addition.
+ * Update: Actually, they seem updated ... At least the bits we use.
+ *
+ *
+ * Maintainer : Sylvain Munaut <tnt@246tNt.com>
+ *
+ * Some of the code has been inspired/copied from the 2.4 code written
+ * by Dale Farnsworth <dfarnsworth@mvista.com>.
+ *
+ * Copyright (C) 2004-2005 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2003 MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/* Platform device Usage :
+ *
+ * Since PSCs can have multiple function, the correct driver for each one
+ * is selected by calling mpc52xx_match_psc_function(...). The function
+ * handled by this driver is "uart".
+ *
+ * The driver init all necessary registers to place the PSC in uart mode without
+ * DCD. However, the pin multiplexing aren't changed and should be set either
+ * by the bootloader or in the platform init code.
+ *
+ * The idx field must be equal to the PSC index ( e.g. 0 for PSC1, 1 for PSC2,
+ * and so on). So the PSC1 is mapped to /dev/ttyS0, PSC2 to /dev/ttyS1 and so
+ * on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly for
+ * the console code : without this 1:1 mapping, at early boot time, when we are
+ * parsing the kernel args console=ttyS?, we wouldn't know wich PSC it will be
+ * mapped to.
+ */
+
+#include <linux/config.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/sysrq.h>
+#include <linux/console.h>
+
+#include <asm/delay.h>
+#include <asm/io.h>
+
+#include <asm/mpc52xx.h>
+#include <asm/mpc52xx_psc.h>
+
+#if defined(CONFIG_SERIAL_MPC52xx_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/serial_core.h>
+
+
+
+#define ISR_PASS_LIMIT 256 /* Max number of iteration in the interrupt */
+
+
+static struct uart_port mpc52xx_uart_ports[MPC52xx_PSC_MAXNUM];
+ /* Rem: - We use the read_status_mask as a shadow of
+ * psc->mpc52xx_psc_imr
+ * - It's important that is array is all zero on start as we
+ * use it to know if it's initialized or not ! If it's not sure
+ * it's cleared, then a memset(...,0,...) should be added to
+ * the console_init
+ */
+
+#define PSC(port) ((struct mpc52xx_psc __iomem *)((port)->membase))
+
+
+/* Forward declaration of the interruption handling routine */
+static irqreturn_t mpc52xx_uart_int(int irq,void *dev_id,struct pt_regs *regs);
+
+
+/* Simple macro to test if a port is console or not. This one is taken
+ * for serial_core.c and maybe should be moved to serial_core.h ? */
+#ifdef CONFIG_SERIAL_CORE_CONSOLE
+#define uart_console(port) ((port)->cons && (port)->cons->index == (port)->line)
+#else
+#define uart_console(port) (0)
+#endif
+
+
+/* ======================================================================== */
+/* UART operations */
+/* ======================================================================== */
+
+static unsigned int
+mpc52xx_uart_tx_empty(struct uart_port *port)
+{
+ int status = in_be16(&PSC(port)->mpc52xx_psc_status);
+ return (status & MPC52xx_PSC_SR_TXEMP) ? TIOCSER_TEMT : 0;
+}
+
+static void
+mpc52xx_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ /* Not implemented */
+}
+
+static unsigned int
+mpc52xx_uart_get_mctrl(struct uart_port *port)
+{
+ /* Not implemented */
+ return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+}
+
+static void
+mpc52xx_uart_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ /* port->lock taken by caller */
+ port->read_status_mask &= ~MPC52xx_PSC_IMR_TXRDY;
+ out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask);
+}
+
+static void
+mpc52xx_uart_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+ /* port->lock taken by caller */
+ port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY;
+ out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask);
+}
+
+static void
+mpc52xx_uart_send_xchar(struct uart_port *port, char ch)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&port->lock, flags);
+
+ port->x_char = ch;
+ if (ch) {
+ /* Make sure tx interrupts are on */
+ /* Truly necessary ??? They should be anyway */
+ port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY;
+ out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask);
+ }
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void
+mpc52xx_uart_stop_rx(struct uart_port *port)
+{
+ /* port->lock taken by caller */
+ port->read_status_mask &= ~MPC52xx_PSC_IMR_RXRDY;
+ out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask);
+}
+
+static void
+mpc52xx_uart_enable_ms(struct uart_port *port)
+{
+ /* Not implemented */
+}
+
+static void
+mpc52xx_uart_break_ctl(struct uart_port *port, int ctl)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&port->lock, flags);
+
+ if ( ctl == -1 )
+ out_8(&PSC(port)->command,MPC52xx_PSC_START_BRK);
+ else
+ out_8(&PSC(port)->command,MPC52xx_PSC_STOP_BRK);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int
+mpc52xx_uart_startup(struct uart_port *port)
+{
+ struct mpc52xx_psc __iomem *psc = PSC(port);
+ int ret;
+
+ /* Request IRQ */
+ ret = request_irq(port->irq, mpc52xx_uart_int,
+ SA_INTERRUPT | SA_SAMPLE_RANDOM, "mpc52xx_psc_uart", port);
+ if (ret)
+ return ret;
+
+ /* Reset/activate the port, clear and enable interrupts */
+ out_8(&psc->command,MPC52xx_PSC_RST_RX);
+ out_8(&psc->command,MPC52xx_PSC_RST_TX);
+
+ out_be32(&psc->sicr,0); /* UART mode DCD ignored */
+
+ out_be16(&psc->mpc52xx_psc_clock_select, 0xdd00); /* /16 prescaler on */
+
+ out_8(&psc->rfcntl, 0x00);
+ out_be16(&psc->rfalarm, 0x1ff);
+ out_8(&psc->tfcntl, 0x07);
+ out_be16(&psc->tfalarm, 0x80);
+
+ port->read_status_mask |= MPC52xx_PSC_IMR_RXRDY | MPC52xx_PSC_IMR_TXRDY;
+ out_be16(&psc->mpc52xx_psc_imr,port->read_status_mask);
+
+ out_8(&psc->command,MPC52xx_PSC_TX_ENABLE);
+ out_8(&psc->command,MPC52xx_PSC_RX_ENABLE);
+
+ return 0;
+}
+
+static void
+mpc52xx_uart_shutdown(struct uart_port *port)
+{
+ struct mpc52xx_psc __iomem *psc = PSC(port);
+
+ /* Shut down the port, interrupt and all */
+ out_8(&psc->command,MPC52xx_PSC_RST_RX);
+ out_8(&psc->command,MPC52xx_PSC_RST_TX);
+
+ port->read_status_mask = 0;
+ out_be16(&psc->mpc52xx_psc_imr,port->read_status_mask);
+
+ /* Release interrupt */
+ free_irq(port->irq, port);
+}
+
+static void
+mpc52xx_uart_set_termios(struct uart_port *port, struct termios *new,
+ struct termios *old)
+{
+ struct mpc52xx_psc __iomem *psc = PSC(port);
+ unsigned long flags;
+ unsigned char mr1, mr2;
+ unsigned short ctr;
+ unsigned int j, baud, quot;
+
+ /* Prepare what we're gonna write */
+ mr1 = 0;
+
+ switch (new->c_cflag & CSIZE) {
+ case CS5: mr1 |= MPC52xx_PSC_MODE_5_BITS;
+ break;
+ case CS6: mr1 |= MPC52xx_PSC_MODE_6_BITS;
+ break;
+ case CS7: mr1 |= MPC52xx_PSC_MODE_7_BITS;
+ break;
+ case CS8:
+ default: mr1 |= MPC52xx_PSC_MODE_8_BITS;
+ }
+
+ if (new->c_cflag & PARENB) {
+ mr1 |= (new->c_cflag & PARODD) ?
+ MPC52xx_PSC_MODE_PARODD : MPC52xx_PSC_MODE_PAREVEN;
+ } else
+ mr1 |= MPC52xx_PSC_MODE_PARNONE;
+
+
+ mr2 = 0;
+
+ if (new->c_cflag & CSTOPB)
+ mr2 |= MPC52xx_PSC_MODE_TWO_STOP;
+ else
+ mr2 |= ((new->c_cflag & CSIZE) == CS5) ?
+ MPC52xx_PSC_MODE_ONE_STOP_5_BITS :
+ MPC52xx_PSC_MODE_ONE_STOP;
+
+
+ baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16);
+ quot = uart_get_divisor(port, baud);
+ ctr = quot & 0xffff;
+
+ /* Get the lock */
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* Update the per-port timeout */
+ uart_update_timeout(port, new->c_cflag, baud);
+
+ /* Do our best to flush TX & RX, so we don't loose anything */
+ /* But we don't wait indefinitly ! */
+ j = 5000000; /* Maximum wait */
+ /* FIXME Can't receive chars since set_termios might be called at early
+ * boot for the console, all stuff is not yet ready to receive at that
+ * time and that just makes the kernel oops */
+ /* while (j-- && mpc52xx_uart_int_rx_chars(port)); */
+ while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXEMP) &&
+ --j)
+ udelay(1);
+
+ if (!j)
+ printk( KERN_ERR "mpc52xx_uart.c: "
+ "Unable to flush RX & TX fifos in-time in set_termios."
+ "Some chars may have been lost.\n" );
+
+ /* Reset the TX & RX */
+ out_8(&psc->command,MPC52xx_PSC_RST_RX);
+ out_8(&psc->command,MPC52xx_PSC_RST_TX);
+
+ /* Send new mode settings */
+ out_8(&psc->command,MPC52xx_PSC_SEL_MODE_REG_1);
+ out_8(&psc->mode,mr1);
+ out_8(&psc->mode,mr2);
+ out_8(&psc->ctur,ctr >> 8);
+ out_8(&psc->ctlr,ctr & 0xff);
+
+ /* Reenable TX & RX */
+ out_8(&psc->command,MPC52xx_PSC_TX_ENABLE);
+ out_8(&psc->command,MPC52xx_PSC_RX_ENABLE);
+
+ /* We're all set, release the lock */
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *
+mpc52xx_uart_type(struct uart_port *port)
+{
+ return port->type == PORT_MPC52xx ? "MPC52xx PSC" : NULL;
+}
+
+static void
+mpc52xx_uart_release_port(struct uart_port *port)
+{
+ if (port->flags & UPF_IOREMAP) { /* remapped by us ? */
+ iounmap(port->membase);
+ port->membase = NULL;
+ }
+
+ release_mem_region(port->mapbase, MPC52xx_PSC_SIZE);
+}
+
+static int
+mpc52xx_uart_request_port(struct uart_port *port)
+{
+ if (port->flags & UPF_IOREMAP) /* Need to remap ? */
+ port->membase = ioremap(port->mapbase, MPC52xx_PSC_SIZE);
+
+ if (!port->membase)
+ return -EINVAL;
+
+ return request_mem_region(port->mapbase, MPC52xx_PSC_SIZE,
+ "mpc52xx_psc_uart") != NULL ? 0 : -EBUSY;
+}
+
+static void
+mpc52xx_uart_config_port(struct uart_port *port, int flags)
+{
+ if ( (flags & UART_CONFIG_TYPE) &&
+ (mpc52xx_uart_request_port(port) == 0) )
+ port->type = PORT_MPC52xx;
+}
+
+static int
+mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ if ( ser->type != PORT_UNKNOWN && ser->type != PORT_MPC52xx )
+ return -EINVAL;
+
+ if ( (ser->irq != port->irq) ||
+ (ser->io_type != SERIAL_IO_MEM) ||
+ (ser->baud_base != port->uartclk) ||
+ (ser->iomem_base != (void*)port->mapbase) ||
+ (ser->hub6 != 0 ) )
+ return -EINVAL;
+
+ return 0;
+}
+
+
+static struct uart_ops mpc52xx_uart_ops = {
+ .tx_empty = mpc52xx_uart_tx_empty,
+ .set_mctrl = mpc52xx_uart_set_mctrl,
+ .get_mctrl = mpc52xx_uart_get_mctrl,
+ .stop_tx = mpc52xx_uart_stop_tx,
+ .start_tx = mpc52xx_uart_start_tx,
+ .send_xchar = mpc52xx_uart_send_xchar,
+ .stop_rx = mpc52xx_uart_stop_rx,
+ .enable_ms = mpc52xx_uart_enable_ms,
+ .break_ctl = mpc52xx_uart_break_ctl,
+ .startup = mpc52xx_uart_startup,
+ .shutdown = mpc52xx_uart_shutdown,
+ .set_termios = mpc52xx_uart_set_termios,
+/* .pm = mpc52xx_uart_pm, Not supported yet */
+/* .set_wake = mpc52xx_uart_set_wake, Not supported yet */
+ .type = mpc52xx_uart_type,
+ .release_port = mpc52xx_uart_release_port,
+ .request_port = mpc52xx_uart_request_port,
+ .config_port = mpc52xx_uart_config_port,
+ .verify_port = mpc52xx_uart_verify_port
+};
+
+
+/* ======================================================================== */
+/* Interrupt handling */
+/* ======================================================================== */
+
+static inline int
+mpc52xx_uart_int_rx_chars(struct uart_port *port, struct pt_regs *regs)
+{
+ struct tty_struct *tty = port->info->tty;
+ unsigned char ch;
+ unsigned short status;
+
+ /* While we can read, do so ! */
+ while ( (status = in_be16(&PSC(port)->mpc52xx_psc_status)) &
+ MPC52xx_PSC_SR_RXRDY) {
+
+ /* If we are full, just stop reading */
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+ break;
+
+ /* Get the char */
+ ch = in_8(&PSC(port)->mpc52xx_psc_buffer_8);
+
+ /* Handle sysreq char */
+#ifdef SUPPORT_SYSRQ
+ if (uart_handle_sysrq_char(port, ch, regs)) {
+ port->sysrq = 0;
+ continue;
+ }
+#endif
+
+ /* Store it */
+ *tty->flip.char_buf_ptr = ch;
+ *tty->flip.flag_buf_ptr = 0;
+ port->icount.rx++;
+
+ if ( status & (MPC52xx_PSC_SR_PE |
+ MPC52xx_PSC_SR_FE |
+ MPC52xx_PSC_SR_RB |
+ MPC52xx_PSC_SR_OE) ) {
+
+ if (status & MPC52xx_PSC_SR_RB) {
+ *tty->flip.flag_buf_ptr = TTY_BREAK;
+ uart_handle_break(port);
+ } else if (status & MPC52xx_PSC_SR_PE)
+ *tty->flip.flag_buf_ptr = TTY_PARITY;
+ else if (status & MPC52xx_PSC_SR_FE)
+ *tty->flip.flag_buf_ptr = TTY_FRAME;
+ if (status & MPC52xx_PSC_SR_OE) {
+ /*
+ * Overrun is special, since it's
+ * reported immediately, and doesn't
+ * affect the current character
+ */
+ if (tty->flip.count < (TTY_FLIPBUF_SIZE-1)) {
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ tty->flip.count++;
+ }
+ *tty->flip.flag_buf_ptr = TTY_OVERRUN;
+ }
+
+ /* Clear error condition */
+ out_8(&PSC(port)->command,MPC52xx_PSC_RST_ERR_STAT);
+
+ }
+
+ tty->flip.char_buf_ptr++;
+ tty->flip.flag_buf_ptr++;
+ tty->flip.count++;
+
+ }
+
+ tty_flip_buffer_push(tty);
+
+ return in_be16(&PSC(port)->mpc52xx_psc_status) & MPC52xx_PSC_SR_RXRDY;
+}
+
+static inline int
+mpc52xx_uart_int_tx_chars(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->info->xmit;
+
+ /* Process out of band chars */
+ if (port->x_char) {
+ out_8(&PSC(port)->mpc52xx_psc_buffer_8, port->x_char);
+ port->icount.tx++;
+ port->x_char = 0;
+ return 1;
+ }
+
+ /* Nothing to do ? */
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ mpc52xx_uart_stop_tx(port,0);
+ return 0;
+ }
+
+ /* Send chars */
+ while (in_be16(&PSC(port)->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXRDY) {
+ out_8(&PSC(port)->mpc52xx_psc_buffer_8, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ }
+
+ /* Wake up */
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ /* Maybe we're done after all */
+ if (uart_circ_empty(xmit)) {
+ mpc52xx_uart_stop_tx(port,0);
+ return 0;
+ }
+
+ return 1;
+}
+
+static irqreturn_t
+mpc52xx_uart_int(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct uart_port *port = (struct uart_port *) dev_id;
+ unsigned long pass = ISR_PASS_LIMIT;
+ unsigned int keepgoing;
+ unsigned short status;
+
+ if ( irq != port->irq ) {
+ printk( KERN_WARNING
+ "mpc52xx_uart_int : " \
+ "Received wrong int %d. Waiting for %d\n",
+ irq, port->irq);
+ return IRQ_NONE;
+ }
+
+ spin_lock(&port->lock);
+
+ /* While we have stuff to do, we continue */
+ do {
+ /* If we don't find anything to do, we stop */
+ keepgoing = 0;
+
+ /* Read status */
+ status = in_be16(&PSC(port)->mpc52xx_psc_isr);
+ status &= port->read_status_mask;
+
+ /* Do we need to receive chars ? */
+ /* For this RX interrupts must be on and some chars waiting */
+ if ( status & MPC52xx_PSC_IMR_RXRDY )
+ keepgoing |= mpc52xx_uart_int_rx_chars(port, regs);
+
+ /* Do we need to send chars ? */
+ /* For this, TX must be ready and TX interrupt enabled */
+ if ( status & MPC52xx_PSC_IMR_TXRDY )
+ keepgoing |= mpc52xx_uart_int_tx_chars(port);
+
+ /* Limit number of iteration */
+ if ( !(--pass) )
+ keepgoing = 0;
+
+ } while (keepgoing);
+
+ spin_unlock(&port->lock);
+
+ return IRQ_HANDLED;
+}
+
+
+/* ======================================================================== */
+/* Console ( if applicable ) */
+/* ======================================================================== */
+
+#ifdef CONFIG_SERIAL_MPC52xx_CONSOLE
+
+static void __init
+mpc52xx_console_get_options(struct uart_port *port,
+ int *baud, int *parity, int *bits, int *flow)
+{
+ struct mpc52xx_psc __iomem *psc = PSC(port);
+ unsigned char mr1;
+
+ /* Read the mode registers */
+ out_8(&psc->command,MPC52xx_PSC_SEL_MODE_REG_1);
+ mr1 = in_8(&psc->mode);
+
+ /* CT{U,L}R are write-only ! */
+ *baud = __res.bi_baudrate ?
+ __res.bi_baudrate : CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD;
+
+ /* Parse them */
+ switch (mr1 & MPC52xx_PSC_MODE_BITS_MASK) {
+ case MPC52xx_PSC_MODE_5_BITS: *bits = 5; break;
+ case MPC52xx_PSC_MODE_6_BITS: *bits = 6; break;
+ case MPC52xx_PSC_MODE_7_BITS: *bits = 7; break;
+ case MPC52xx_PSC_MODE_8_BITS:
+ default: *bits = 8;
+ }
+
+ if (mr1 & MPC52xx_PSC_MODE_PARNONE)
+ *parity = 'n';
+ else
+ *parity = mr1 & MPC52xx_PSC_MODE_PARODD ? 'o' : 'e';
+}
+
+static void
+mpc52xx_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct uart_port *port = &mpc52xx_uart_ports[co->index];
+ struct mpc52xx_psc __iomem *psc = PSC(port);
+ unsigned int i, j;
+
+ /* Disable interrupts */
+ out_be16(&psc->mpc52xx_psc_imr, 0);
+
+ /* Wait the TX buffer to be empty */
+ j = 5000000; /* Maximum wait */
+ while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXEMP) &&
+ --j)
+ udelay(1);
+
+ /* Write all the chars */
+ for ( i=0 ; i<count ; i++ ) {
+
+ /* Send the char */
+ out_8(&psc->mpc52xx_psc_buffer_8, *s);
+
+ /* Line return handling */
+ if ( *s++ == '\n' )
+ out_8(&psc->mpc52xx_psc_buffer_8, '\r');
+
+ /* Wait the TX buffer to be empty */
+ j = 20000; /* Maximum wait */
+ while (!(in_be16(&psc->mpc52xx_psc_status) &
+ MPC52xx_PSC_SR_TXEMP) && --j)
+ udelay(1);
+ }
+
+ /* Restore interrupt state */
+ out_be16(&psc->mpc52xx_psc_imr, port->read_status_mask);
+}
+
+static int __init
+mpc52xx_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port = &mpc52xx_uart_ports[co->index];
+
+ int baud = CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (co->index < 0 || co->index >= MPC52xx_PSC_MAXNUM)
+ return -EINVAL;
+
+ /* Basic port init. Needed since we use some uart_??? func before
+ * real init for early access */
+ spin_lock_init(&port->lock);
+ port->uartclk = __res.bi_ipbfreq / 2; /* Look at CTLR doc */
+ port->ops = &mpc52xx_uart_ops;
+ port->mapbase = MPC52xx_PA(MPC52xx_PSCx_OFFSET(co->index+1));
+
+ /* We ioremap ourself */
+ port->membase = ioremap(port->mapbase, MPC52xx_PSC_SIZE);
+ if (port->membase == NULL)
+ return -EINVAL;
+
+ /* Setup the port parameters accoding to options */
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ else
+ mpc52xx_console_get_options(port, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+
+extern struct uart_driver mpc52xx_uart_driver;
+
+static struct console mpc52xx_console = {
+ .name = "ttyS",
+ .write = mpc52xx_console_write,
+ .device = uart_console_device,
+ .setup = mpc52xx_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1, /* Specified on the cmdline (e.g. console=ttyS0 ) */
+ .data = &mpc52xx_uart_driver,
+};
+
+
+static int __init
+mpc52xx_console_init(void)
+{
+ register_console(&mpc52xx_console);
+ return 0;
+}
+
+console_initcall(mpc52xx_console_init);
+
+#define MPC52xx_PSC_CONSOLE &mpc52xx_console
+#else
+#define MPC52xx_PSC_CONSOLE NULL
+#endif
+
+
+/* ======================================================================== */
+/* UART Driver */
+/* ======================================================================== */
+
+static struct uart_driver mpc52xx_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "mpc52xx_psc_uart",
+ .dev_name = "ttyS",
+ .devfs_name = "ttyS",
+ .major = TTY_MAJOR,
+ .minor = 64,
+ .nr = MPC52xx_PSC_MAXNUM,
+ .cons = MPC52xx_PSC_CONSOLE,
+};
+
+
+/* ======================================================================== */
+/* Platform Driver */
+/* ======================================================================== */
+
+static int __devinit
+mpc52xx_uart_probe(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct resource *res = pdev->resource;
+
+ struct uart_port *port = NULL;
+ int i, idx, ret;
+
+ /* Check validity & presence */
+ idx = pdev->id;
+ if (idx < 0 || idx >= MPC52xx_PSC_MAXNUM)
+ return -EINVAL;
+
+ if (!mpc52xx_match_psc_function(idx,"uart"))
+ return -ENODEV;
+
+ /* Init the port structure */
+ port = &mpc52xx_uart_ports[idx];
+
+ memset(port, 0x00, sizeof(struct uart_port));
+
+ spin_lock_init(&port->lock);
+ port->uartclk = __res.bi_ipbfreq / 2; /* Look at CTLR doc */
+ port->fifosize = 255; /* Should be 512 ! But it can't be */
+ /* stored in a unsigned char */
+ port->iotype = UPIO_MEM;
+ port->flags = UPF_BOOT_AUTOCONF |
+ ( uart_console(port) ? 0 : UPF_IOREMAP );
+ port->line = idx;
+ port->ops = &mpc52xx_uart_ops;
+
+ /* Search for IRQ and mapbase */
+ for (i=0 ; i<pdev->num_resources ; i++, res++) {
+ if (res->flags & IORESOURCE_MEM)
+ port->mapbase = res->start;
+ else if (res->flags & IORESOURCE_IRQ)
+ port->irq = res->start;
+ }
+ if (!port->irq || !port->mapbase)
+ return -EINVAL;
+
+ /* Add the port to the uart sub-system */
+ ret = uart_add_one_port(&mpc52xx_uart_driver, port);
+ if (!ret)
+ dev_set_drvdata(dev, (void*)port);
+
+ return ret;
+}
+
+static int
+mpc52xx_uart_remove(struct device *dev)
+{
+ struct uart_port *port = (struct uart_port *) dev_get_drvdata(dev);
+
+ dev_set_drvdata(dev, NULL);
+
+ if (port)
+ uart_remove_one_port(&mpc52xx_uart_driver, port);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int
+mpc52xx_uart_suspend(struct device *dev, u32 state, u32 level)
+{
+ struct uart_port *port = (struct uart_port *) dev_get_drvdata(dev);
+
+ if (sport && level == SUSPEND_DISABLE)
+ uart_suspend_port(&mpc52xx_uart_driver, port);
+
+ return 0;
+}
+
+static int
+mpc52xx_uart_resume(struct device *dev, u32 level)
+{
+ struct uart_port *port = (struct uart_port *) dev_get_drvdata(dev);
+
+ if (port && level == RESUME_ENABLE)
+ uart_resume_port(&mpc52xx_uart_driver, port);
+
+ return 0;
+}
+#endif
+
+static struct device_driver mpc52xx_uart_platform_driver = {
+ .name = "mpc52xx-psc",
+ .bus = &platform_bus_type,
+ .probe = mpc52xx_uart_probe,
+ .remove = mpc52xx_uart_remove,
+#ifdef CONFIG_PM
+ .suspend = mpc52xx_uart_suspend,
+ .resume = mpc52xx_uart_resume,
+#endif
+};
+
+
+/* ======================================================================== */
+/* Module */
+/* ======================================================================== */
+
+static int __init
+mpc52xx_uart_init(void)
+{
+ int ret;
+
+ printk(KERN_INFO "Serial: MPC52xx PSC driver\n");
+
+ ret = uart_register_driver(&mpc52xx_uart_driver);
+ if (ret == 0) {
+ ret = driver_register(&mpc52xx_uart_platform_driver);
+ if (ret)
+ uart_unregister_driver(&mpc52xx_uart_driver);
+ }
+
+ return ret;
+}
+
+static void __exit
+mpc52xx_uart_exit(void)
+{
+ driver_unregister(&mpc52xx_uart_platform_driver);
+ uart_unregister_driver(&mpc52xx_uart_driver);
+}
+
+
+module_init(mpc52xx_uart_init);
+module_exit(mpc52xx_uart_exit);
+
+MODULE_AUTHOR("Sylvain Munaut <tnt@246tNt.com>");
+MODULE_DESCRIPTION("Freescale MPC52xx PSC UART");
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/mpsc.c b/drivers/serial/mpsc.c
new file mode 100644
index 00000000000..d0dfc3cf924
--- /dev/null
+++ b/drivers/serial/mpsc.c
@@ -0,0 +1,1832 @@
+/*
+ * drivers/serial/mpsc.c
+ *
+ * Generic driver for the MPSC (UART mode) on Marvell parts (e.g., GT64240,
+ * GT64260, MV64340, MV64360, GT96100, ... ).
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * Based on an old MPSC driver that was in the linuxppc tree. It appears to
+ * have been created by Chris Zankel (formerly of MontaVista) but there
+ * is no proper Copyright so I'm not sure. Apparently, parts were also
+ * taken from PPCBoot (now U-Boot). Also based on drivers/serial/8250.c
+ * by Russell King.
+ *
+ * 2004 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+/*
+ * The MPSC interface is much like a typical network controller's interface.
+ * That is, you set up separate rings of descriptors for transmitting and
+ * receiving data. There is also a pool of buffers with (one buffer per
+ * descriptor) that incoming data are dma'd into or outgoing data are dma'd
+ * out of.
+ *
+ * The MPSC requires two other controllers to be able to work. The Baud Rate
+ * Generator (BRG) provides a clock at programmable frequencies which determines
+ * the baud rate. The Serial DMA Controller (SDMA) takes incoming data from the
+ * MPSC and DMA's it into memory or DMA's outgoing data and passes it to the
+ * MPSC. It is actually the SDMA interrupt that the driver uses to keep the
+ * transmit and receive "engines" going (i.e., indicate data has been
+ * transmitted or received).
+ *
+ * NOTES:
+ *
+ * 1) Some chips have an erratum where several regs cannot be
+ * read. To work around that, we keep a local copy of those regs in
+ * 'mpsc_port_info'.
+ *
+ * 2) Some chips have an erratum where the ctlr will hang when the SDMA ctlr
+ * accesses system mem with coherency enabled. For that reason, the driver
+ * assumes that coherency for that ctlr has been disabled. This means
+ * that when in a cache coherent system, the driver has to manually manage
+ * the data cache on the areas that it touches because the dma_* macro are
+ * basically no-ops.
+ *
+ * 3) There is an erratum (on PPC) where you can't use the instruction to do
+ * a DMA_TO_DEVICE/cache clean so DMA_BIDIRECTIONAL/flushes are used in places
+ * where a DMA_TO_DEVICE/clean would have [otherwise] sufficed.
+ *
+ * 4) AFAICT, hardware flow control isn't supported by the controller --MAG.
+ */
+
+#include "mpsc.h"
+
+/*
+ * Define how this driver is known to the outside (we've been assigned a
+ * range on the "Low-density serial ports" major).
+ */
+#define MPSC_MAJOR 204
+#define MPSC_MINOR_START 44
+#define MPSC_DRIVER_NAME "MPSC"
+#define MPSC_DEVFS_NAME "ttymm/"
+#define MPSC_DEV_NAME "ttyMM"
+#define MPSC_VERSION "1.00"
+
+static struct mpsc_port_info mpsc_ports[MPSC_NUM_CTLRS];
+static struct mpsc_shared_regs mpsc_shared_regs;
+
+/*
+ ******************************************************************************
+ *
+ * Baud Rate Generator Routines (BRG)
+ *
+ ******************************************************************************
+ */
+static void
+mpsc_brg_init(struct mpsc_port_info *pi, u32 clk_src)
+{
+ u32 v;
+
+ v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR);
+ v = (v & ~(0xf << 18)) | ((clk_src & 0xf) << 18);
+
+ if (pi->brg_can_tune)
+ v &= ~(1 << 25);
+
+ if (pi->mirror_regs)
+ pi->BRG_BCR_m = v;
+ writel(v, pi->brg_base + BRG_BCR);
+
+ writel(readl(pi->brg_base + BRG_BTR) & 0xffff0000,
+ pi->brg_base + BRG_BTR);
+ return;
+}
+
+static void
+mpsc_brg_enable(struct mpsc_port_info *pi)
+{
+ u32 v;
+
+ v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR);
+ v |= (1 << 16);
+
+ if (pi->mirror_regs)
+ pi->BRG_BCR_m = v;
+ writel(v, pi->brg_base + BRG_BCR);
+ return;
+}
+
+static void
+mpsc_brg_disable(struct mpsc_port_info *pi)
+{
+ u32 v;
+
+ v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR);
+ v &= ~(1 << 16);
+
+ if (pi->mirror_regs)
+ pi->BRG_BCR_m = v;
+ writel(v, pi->brg_base + BRG_BCR);
+ return;
+}
+
+static inline void
+mpsc_set_baudrate(struct mpsc_port_info *pi, u32 baud)
+{
+ /*
+ * To set the baud, we adjust the CDV field in the BRG_BCR reg.
+ * From manual: Baud = clk / ((CDV+1)*2) ==> CDV = (clk / (baud*2)) - 1.
+ * However, the input clock is divided by 16 in the MPSC b/c of how
+ * 'MPSC_MMCRH' was set up so we have to divide the 'clk' used in our
+ * calculation by 16 to account for that. So the real calculation
+ * that accounts for the way the mpsc is set up is:
+ * CDV = (clk / (baud*2*16)) - 1 ==> CDV = (clk / (baud << 5)) - 1.
+ */
+ u32 cdv = (pi->port.uartclk / (baud << 5)) - 1;
+ u32 v;
+
+ mpsc_brg_disable(pi);
+ v = (pi->mirror_regs) ? pi->BRG_BCR_m : readl(pi->brg_base + BRG_BCR);
+ v = (v & 0xffff0000) | (cdv & 0xffff);
+
+ if (pi->mirror_regs)
+ pi->BRG_BCR_m = v;
+ writel(v, pi->brg_base + BRG_BCR);
+ mpsc_brg_enable(pi);
+
+ return;
+}
+
+/*
+ ******************************************************************************
+ *
+ * Serial DMA Routines (SDMA)
+ *
+ ******************************************************************************
+ */
+
+static void
+mpsc_sdma_burstsize(struct mpsc_port_info *pi, u32 burst_size)
+{
+ u32 v;
+
+ pr_debug("mpsc_sdma_burstsize[%d]: burst_size: %d\n",
+ pi->port.line, burst_size);
+
+ burst_size >>= 3; /* Divide by 8 b/c reg values are 8-byte chunks */
+
+ if (burst_size < 2)
+ v = 0x0; /* 1 64-bit word */
+ else if (burst_size < 4)
+ v = 0x1; /* 2 64-bit words */
+ else if (burst_size < 8)
+ v = 0x2; /* 4 64-bit words */
+ else
+ v = 0x3; /* 8 64-bit words */
+
+ writel((readl(pi->sdma_base + SDMA_SDC) & (0x3 << 12)) | (v << 12),
+ pi->sdma_base + SDMA_SDC);
+ return;
+}
+
+static void
+mpsc_sdma_init(struct mpsc_port_info *pi, u32 burst_size)
+{
+ pr_debug("mpsc_sdma_init[%d]: burst_size: %d\n", pi->port.line,
+ burst_size);
+
+ writel((readl(pi->sdma_base + SDMA_SDC) & 0x3ff) | 0x03f,
+ pi->sdma_base + SDMA_SDC);
+ mpsc_sdma_burstsize(pi, burst_size);
+ return;
+}
+
+static inline u32
+mpsc_sdma_intr_mask(struct mpsc_port_info *pi, u32 mask)
+{
+ u32 old, v;
+
+ pr_debug("mpsc_sdma_intr_mask[%d]: mask: 0x%x\n", pi->port.line, mask);
+
+ old = v = (pi->mirror_regs) ? pi->shared_regs->SDMA_INTR_MASK_m :
+ readl(pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK);
+
+ mask &= 0xf;
+ if (pi->port.line)
+ mask <<= 8;
+ v &= ~mask;
+
+ if (pi->mirror_regs)
+ pi->shared_regs->SDMA_INTR_MASK_m = v;
+ writel(v, pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK);
+
+ if (pi->port.line)
+ old >>= 8;
+ return old & 0xf;
+}
+
+static inline void
+mpsc_sdma_intr_unmask(struct mpsc_port_info *pi, u32 mask)
+{
+ u32 v;
+
+ pr_debug("mpsc_sdma_intr_unmask[%d]: mask: 0x%x\n", pi->port.line,mask);
+
+ v = (pi->mirror_regs) ? pi->shared_regs->SDMA_INTR_MASK_m :
+ readl(pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK);
+
+ mask &= 0xf;
+ if (pi->port.line)
+ mask <<= 8;
+ v |= mask;
+
+ if (pi->mirror_regs)
+ pi->shared_regs->SDMA_INTR_MASK_m = v;
+ writel(v, pi->shared_regs->sdma_intr_base + SDMA_INTR_MASK);
+ return;
+}
+
+static inline void
+mpsc_sdma_intr_ack(struct mpsc_port_info *pi)
+{
+ pr_debug("mpsc_sdma_intr_ack[%d]: Acknowledging IRQ\n", pi->port.line);
+
+ if (pi->mirror_regs)
+ pi->shared_regs->SDMA_INTR_CAUSE_m = 0;
+ writel(0, pi->shared_regs->sdma_intr_base + SDMA_INTR_CAUSE);
+ return;
+}
+
+static inline void
+mpsc_sdma_set_rx_ring(struct mpsc_port_info *pi, struct mpsc_rx_desc *rxre_p)
+{
+ pr_debug("mpsc_sdma_set_rx_ring[%d]: rxre_p: 0x%x\n",
+ pi->port.line, (u32) rxre_p);
+
+ writel((u32)rxre_p, pi->sdma_base + SDMA_SCRDP);
+ return;
+}
+
+static inline void
+mpsc_sdma_set_tx_ring(struct mpsc_port_info *pi, struct mpsc_tx_desc *txre_p)
+{
+ writel((u32)txre_p, pi->sdma_base + SDMA_SFTDP);
+ writel((u32)txre_p, pi->sdma_base + SDMA_SCTDP);
+ return;
+}
+
+static inline void
+mpsc_sdma_cmd(struct mpsc_port_info *pi, u32 val)
+{
+ u32 v;
+
+ v = readl(pi->sdma_base + SDMA_SDCM);
+ if (val)
+ v |= val;
+ else
+ v = 0;
+ wmb();
+ writel(v, pi->sdma_base + SDMA_SDCM);
+ wmb();
+ return;
+}
+
+static inline uint
+mpsc_sdma_tx_active(struct mpsc_port_info *pi)
+{
+ return readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_TXD;
+}
+
+static inline void
+mpsc_sdma_start_tx(struct mpsc_port_info *pi)
+{
+ struct mpsc_tx_desc *txre, *txre_p;
+
+ /* If tx isn't running & there's a desc ready to go, start it */
+ if (!mpsc_sdma_tx_active(pi)) {
+ txre = (struct mpsc_tx_desc *)(pi->txr +
+ (pi->txr_tail * MPSC_TXRE_SIZE));
+ dma_cache_sync((void *) txre, MPSC_TXRE_SIZE, DMA_FROM_DEVICE);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+ if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+ invalidate_dcache_range((ulong)txre,
+ (ulong)txre + MPSC_TXRE_SIZE);
+#endif
+
+ if (be32_to_cpu(txre->cmdstat) & SDMA_DESC_CMDSTAT_O) {
+ txre_p = (struct mpsc_tx_desc *)(pi->txr_p +
+ (pi->txr_tail *
+ MPSC_TXRE_SIZE));
+
+ mpsc_sdma_set_tx_ring(pi, txre_p);
+ mpsc_sdma_cmd(pi, SDMA_SDCM_STD | SDMA_SDCM_TXD);
+ }
+ }
+
+ return;
+}
+
+static inline void
+mpsc_sdma_stop(struct mpsc_port_info *pi)
+{
+ pr_debug("mpsc_sdma_stop[%d]: Stopping SDMA\n", pi->port.line);
+
+ /* Abort any SDMA transfers */
+ mpsc_sdma_cmd(pi, 0);
+ mpsc_sdma_cmd(pi, SDMA_SDCM_AR | SDMA_SDCM_AT);
+
+ /* Clear the SDMA current and first TX and RX pointers */
+ mpsc_sdma_set_tx_ring(pi, 0);
+ mpsc_sdma_set_rx_ring(pi, 0);
+
+ /* Disable interrupts */
+ mpsc_sdma_intr_mask(pi, 0xf);
+ mpsc_sdma_intr_ack(pi);
+
+ return;
+}
+
+/*
+ ******************************************************************************
+ *
+ * Multi-Protocol Serial Controller Routines (MPSC)
+ *
+ ******************************************************************************
+ */
+
+static void
+mpsc_hw_init(struct mpsc_port_info *pi)
+{
+ u32 v;
+
+ pr_debug("mpsc_hw_init[%d]: Initializing hardware\n", pi->port.line);
+
+ /* Set up clock routing */
+ if (pi->mirror_regs) {
+ v = pi->shared_regs->MPSC_MRR_m;
+ v &= ~0x1c7;
+ pi->shared_regs->MPSC_MRR_m = v;
+ writel(v, pi->shared_regs->mpsc_routing_base + MPSC_MRR);
+
+ v = pi->shared_regs->MPSC_RCRR_m;
+ v = (v & ~0xf0f) | 0x100;
+ pi->shared_regs->MPSC_RCRR_m = v;
+ writel(v, pi->shared_regs->mpsc_routing_base + MPSC_RCRR);
+
+ v = pi->shared_regs->MPSC_TCRR_m;
+ v = (v & ~0xf0f) | 0x100;
+ pi->shared_regs->MPSC_TCRR_m = v;
+ writel(v, pi->shared_regs->mpsc_routing_base + MPSC_TCRR);
+ }
+ else {
+ v = readl(pi->shared_regs->mpsc_routing_base + MPSC_MRR);
+ v &= ~0x1c7;
+ writel(v, pi->shared_regs->mpsc_routing_base + MPSC_MRR);
+
+ v = readl(pi->shared_regs->mpsc_routing_base + MPSC_RCRR);
+ v = (v & ~0xf0f) | 0x100;
+ writel(v, pi->shared_regs->mpsc_routing_base + MPSC_RCRR);
+
+ v = readl(pi->shared_regs->mpsc_routing_base + MPSC_TCRR);
+ v = (v & ~0xf0f) | 0x100;
+ writel(v, pi->shared_regs->mpsc_routing_base + MPSC_TCRR);
+ }
+
+ /* Put MPSC in UART mode & enabel Tx/Rx egines */
+ writel(0x000004c4, pi->mpsc_base + MPSC_MMCRL);
+
+ /* No preamble, 16x divider, low-latency, */
+ writel(0x04400400, pi->mpsc_base + MPSC_MMCRH);
+
+ if (pi->mirror_regs) {
+ pi->MPSC_CHR_1_m = 0;
+ pi->MPSC_CHR_2_m = 0;
+ }
+ writel(0, pi->mpsc_base + MPSC_CHR_1);
+ writel(0, pi->mpsc_base + MPSC_CHR_2);
+ writel(pi->mpsc_max_idle, pi->mpsc_base + MPSC_CHR_3);
+ writel(0, pi->mpsc_base + MPSC_CHR_4);
+ writel(0, pi->mpsc_base + MPSC_CHR_5);
+ writel(0, pi->mpsc_base + MPSC_CHR_6);
+ writel(0, pi->mpsc_base + MPSC_CHR_7);
+ writel(0, pi->mpsc_base + MPSC_CHR_8);
+ writel(0, pi->mpsc_base + MPSC_CHR_9);
+ writel(0, pi->mpsc_base + MPSC_CHR_10);
+
+ return;
+}
+
+static inline void
+mpsc_enter_hunt(struct mpsc_port_info *pi)
+{
+ pr_debug("mpsc_enter_hunt[%d]: Hunting...\n", pi->port.line);
+
+ if (pi->mirror_regs) {
+ writel(pi->MPSC_CHR_2_m | MPSC_CHR_2_EH,
+ pi->mpsc_base + MPSC_CHR_2);
+ /* Erratum prevents reading CHR_2 so just delay for a while */
+ udelay(100);
+ }
+ else {
+ writel(readl(pi->mpsc_base + MPSC_CHR_2) | MPSC_CHR_2_EH,
+ pi->mpsc_base + MPSC_CHR_2);
+
+ while (readl(pi->mpsc_base + MPSC_CHR_2) & MPSC_CHR_2_EH)
+ udelay(10);
+ }
+
+ return;
+}
+
+static inline void
+mpsc_freeze(struct mpsc_port_info *pi)
+{
+ u32 v;
+
+ pr_debug("mpsc_freeze[%d]: Freezing\n", pi->port.line);
+
+ v = (pi->mirror_regs) ? pi->MPSC_MPCR_m :
+ readl(pi->mpsc_base + MPSC_MPCR);
+ v |= MPSC_MPCR_FRZ;
+
+ if (pi->mirror_regs)
+ pi->MPSC_MPCR_m = v;
+ writel(v, pi->mpsc_base + MPSC_MPCR);
+ return;
+}
+
+static inline void
+mpsc_unfreeze(struct mpsc_port_info *pi)
+{
+ u32 v;
+
+ v = (pi->mirror_regs) ? pi->MPSC_MPCR_m :
+ readl(pi->mpsc_base + MPSC_MPCR);
+ v &= ~MPSC_MPCR_FRZ;
+
+ if (pi->mirror_regs)
+ pi->MPSC_MPCR_m = v;
+ writel(v, pi->mpsc_base + MPSC_MPCR);
+
+ pr_debug("mpsc_unfreeze[%d]: Unfrozen\n", pi->port.line);
+ return;
+}
+
+static inline void
+mpsc_set_char_length(struct mpsc_port_info *pi, u32 len)
+{
+ u32 v;
+
+ pr_debug("mpsc_set_char_length[%d]: char len: %d\n", pi->port.line,len);
+
+ v = (pi->mirror_regs) ? pi->MPSC_MPCR_m :
+ readl(pi->mpsc_base + MPSC_MPCR);
+ v = (v & ~(0x3 << 12)) | ((len & 0x3) << 12);
+
+ if (pi->mirror_regs)
+ pi->MPSC_MPCR_m = v;
+ writel(v, pi->mpsc_base + MPSC_MPCR);
+ return;
+}
+
+static inline void
+mpsc_set_stop_bit_length(struct mpsc_port_info *pi, u32 len)
+{
+ u32 v;
+
+ pr_debug("mpsc_set_stop_bit_length[%d]: stop bits: %d\n",
+ pi->port.line, len);
+
+ v = (pi->mirror_regs) ? pi->MPSC_MPCR_m :
+ readl(pi->mpsc_base + MPSC_MPCR);
+
+ v = (v & ~(1 << 14)) | ((len & 0x1) << 14);
+
+ if (pi->mirror_regs)
+ pi->MPSC_MPCR_m = v;
+ writel(v, pi->mpsc_base + MPSC_MPCR);
+ return;
+}
+
+static inline void
+mpsc_set_parity(struct mpsc_port_info *pi, u32 p)
+{
+ u32 v;
+
+ pr_debug("mpsc_set_parity[%d]: parity bits: 0x%x\n", pi->port.line, p);
+
+ v = (pi->mirror_regs) ? pi->MPSC_CHR_2_m :
+ readl(pi->mpsc_base + MPSC_CHR_2);
+
+ p &= 0x3;
+ v = (v & ~0xc000c) | (p << 18) | (p << 2);
+
+ if (pi->mirror_regs)
+ pi->MPSC_CHR_2_m = v;
+ writel(v, pi->mpsc_base + MPSC_CHR_2);
+ return;
+}
+
+/*
+ ******************************************************************************
+ *
+ * Driver Init Routines
+ *
+ ******************************************************************************
+ */
+
+static void
+mpsc_init_hw(struct mpsc_port_info *pi)
+{
+ pr_debug("mpsc_init_hw[%d]: Initializing\n", pi->port.line);
+
+ mpsc_brg_init(pi, pi->brg_clk_src);
+ mpsc_brg_enable(pi);
+ mpsc_sdma_init(pi, dma_get_cache_alignment()); /* burst a cacheline */
+ mpsc_sdma_stop(pi);
+ mpsc_hw_init(pi);
+
+ return;
+}
+
+static int
+mpsc_alloc_ring_mem(struct mpsc_port_info *pi)
+{
+ int rc = 0;
+ static void mpsc_free_ring_mem(struct mpsc_port_info *pi);
+
+ pr_debug("mpsc_alloc_ring_mem[%d]: Allocating ring mem\n",
+ pi->port.line);
+
+ if (!pi->dma_region) {
+ if (!dma_supported(pi->port.dev, 0xffffffff)) {
+ printk(KERN_ERR "MPSC: Inadequate DMA support\n");
+ rc = -ENXIO;
+ }
+ else if ((pi->dma_region = dma_alloc_noncoherent(pi->port.dev,
+ MPSC_DMA_ALLOC_SIZE, &pi->dma_region_p, GFP_KERNEL))
+ == NULL) {
+
+ printk(KERN_ERR "MPSC: Can't alloc Desc region\n");
+ rc = -ENOMEM;
+ }
+ }
+
+ return rc;
+}
+
+static void
+mpsc_free_ring_mem(struct mpsc_port_info *pi)
+{
+ pr_debug("mpsc_free_ring_mem[%d]: Freeing ring mem\n", pi->port.line);
+
+ if (pi->dma_region) {
+ dma_free_noncoherent(pi->port.dev, MPSC_DMA_ALLOC_SIZE,
+ pi->dma_region, pi->dma_region_p);
+ pi->dma_region = NULL;
+ pi->dma_region_p = (dma_addr_t) NULL;
+ }
+
+ return;
+}
+
+static void
+mpsc_init_rings(struct mpsc_port_info *pi)
+{
+ struct mpsc_rx_desc *rxre;
+ struct mpsc_tx_desc *txre;
+ dma_addr_t dp, dp_p;
+ u8 *bp, *bp_p;
+ int i;
+
+ pr_debug("mpsc_init_rings[%d]: Initializing rings\n", pi->port.line);
+
+ BUG_ON(pi->dma_region == NULL);
+
+ memset(pi->dma_region, 0, MPSC_DMA_ALLOC_SIZE);
+
+ /*
+ * Descriptors & buffers are multiples of cacheline size and must be
+ * cacheline aligned.
+ */
+ dp = ALIGN((u32) pi->dma_region, dma_get_cache_alignment());
+ dp_p = ALIGN((u32) pi->dma_region_p, dma_get_cache_alignment());
+
+ /*
+ * Partition dma region into rx ring descriptor, rx buffers,
+ * tx ring descriptors, and tx buffers.
+ */
+ pi->rxr = dp;
+ pi->rxr_p = dp_p;
+ dp += MPSC_RXR_SIZE;
+ dp_p += MPSC_RXR_SIZE;
+
+ pi->rxb = (u8 *) dp;
+ pi->rxb_p = (u8 *) dp_p;
+ dp += MPSC_RXB_SIZE;
+ dp_p += MPSC_RXB_SIZE;
+
+ pi->rxr_posn = 0;
+
+ pi->txr = dp;
+ pi->txr_p = dp_p;
+ dp += MPSC_TXR_SIZE;
+ dp_p += MPSC_TXR_SIZE;
+
+ pi->txb = (u8 *) dp;
+ pi->txb_p = (u8 *) dp_p;
+
+ pi->txr_head = 0;
+ pi->txr_tail = 0;
+
+ /* Init rx ring descriptors */
+ dp = pi->rxr;
+ dp_p = pi->rxr_p;
+ bp = pi->rxb;
+ bp_p = pi->rxb_p;
+
+ for (i = 0; i < MPSC_RXR_ENTRIES; i++) {
+ rxre = (struct mpsc_rx_desc *)dp;
+
+ rxre->bufsize = cpu_to_be16(MPSC_RXBE_SIZE);
+ rxre->bytecnt = cpu_to_be16(0);
+ rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O |
+ SDMA_DESC_CMDSTAT_EI |
+ SDMA_DESC_CMDSTAT_F |
+ SDMA_DESC_CMDSTAT_L);
+ rxre->link = cpu_to_be32(dp_p + MPSC_RXRE_SIZE);
+ rxre->buf_ptr = cpu_to_be32(bp_p);
+
+ dp += MPSC_RXRE_SIZE;
+ dp_p += MPSC_RXRE_SIZE;
+ bp += MPSC_RXBE_SIZE;
+ bp_p += MPSC_RXBE_SIZE;
+ }
+ rxre->link = cpu_to_be32(pi->rxr_p); /* Wrap last back to first */
+
+ /* Init tx ring descriptors */
+ dp = pi->txr;
+ dp_p = pi->txr_p;
+ bp = pi->txb;
+ bp_p = pi->txb_p;
+
+ for (i = 0; i < MPSC_TXR_ENTRIES; i++) {
+ txre = (struct mpsc_tx_desc *)dp;
+
+ txre->link = cpu_to_be32(dp_p + MPSC_TXRE_SIZE);
+ txre->buf_ptr = cpu_to_be32(bp_p);
+
+ dp += MPSC_TXRE_SIZE;
+ dp_p += MPSC_TXRE_SIZE;
+ bp += MPSC_TXBE_SIZE;
+ bp_p += MPSC_TXBE_SIZE;
+ }
+ txre->link = cpu_to_be32(pi->txr_p); /* Wrap last back to first */
+
+ dma_cache_sync((void *) pi->dma_region, MPSC_DMA_ALLOC_SIZE,
+ DMA_BIDIRECTIONAL);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+ if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+ flush_dcache_range((ulong)pi->dma_region,
+ (ulong)pi->dma_region + MPSC_DMA_ALLOC_SIZE);
+#endif
+
+ return;
+}
+
+static void
+mpsc_uninit_rings(struct mpsc_port_info *pi)
+{
+ pr_debug("mpsc_uninit_rings[%d]: Uninitializing rings\n",pi->port.line);
+
+ BUG_ON(pi->dma_region == NULL);
+
+ pi->rxr = 0;
+ pi->rxr_p = 0;
+ pi->rxb = NULL;
+ pi->rxb_p = NULL;
+ pi->rxr_posn = 0;
+
+ pi->txr = 0;
+ pi->txr_p = 0;
+ pi->txb = NULL;
+ pi->txb_p = NULL;
+ pi->txr_head = 0;
+ pi->txr_tail = 0;
+
+ return;
+}
+
+static int
+mpsc_make_ready(struct mpsc_port_info *pi)
+{
+ int rc;
+
+ pr_debug("mpsc_make_ready[%d]: Making cltr ready\n", pi->port.line);
+
+ if (!pi->ready) {
+ mpsc_init_hw(pi);
+ if ((rc = mpsc_alloc_ring_mem(pi)))
+ return rc;
+ mpsc_init_rings(pi);
+ pi->ready = 1;
+ }
+
+ return 0;
+}
+
+/*
+ ******************************************************************************
+ *
+ * Interrupt Handling Routines
+ *
+ ******************************************************************************
+ */
+
+static inline int
+mpsc_rx_intr(struct mpsc_port_info *pi, struct pt_regs *regs)
+{
+ struct mpsc_rx_desc *rxre;
+ struct tty_struct *tty = pi->port.info->tty;
+ u32 cmdstat, bytes_in, i;
+ int rc = 0;
+ u8 *bp;
+ char flag = TTY_NORMAL;
+ static void mpsc_start_rx(struct mpsc_port_info *pi);
+
+ pr_debug("mpsc_rx_intr[%d]: Handling Rx intr\n", pi->port.line);
+
+ rxre = (struct mpsc_rx_desc *)(pi->rxr + (pi->rxr_posn*MPSC_RXRE_SIZE));
+
+ dma_cache_sync((void *)rxre, MPSC_RXRE_SIZE, DMA_FROM_DEVICE);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+ if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+ invalidate_dcache_range((ulong)rxre,
+ (ulong)rxre + MPSC_RXRE_SIZE);
+#endif
+
+ /*
+ * Loop through Rx descriptors handling ones that have been completed.
+ */
+ while (!((cmdstat = be32_to_cpu(rxre->cmdstat)) & SDMA_DESC_CMDSTAT_O)){
+ bytes_in = be16_to_cpu(rxre->bytecnt);
+
+ /* Following use of tty struct directly is deprecated */
+ if (unlikely((tty->flip.count + bytes_in) >= TTY_FLIPBUF_SIZE)){
+ if (tty->low_latency)
+ tty_flip_buffer_push(tty);
+ /*
+ * If this failed then we will throw awa the bytes
+ * but mst do so to clear interrupts.
+ */
+ }
+
+ bp = pi->rxb + (pi->rxr_posn * MPSC_RXBE_SIZE);
+ dma_cache_sync((void *) bp, MPSC_RXBE_SIZE, DMA_FROM_DEVICE);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+ if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+ invalidate_dcache_range((ulong)bp,
+ (ulong)bp + MPSC_RXBE_SIZE);
+#endif
+
+ /*
+ * Other than for parity error, the manual provides little
+ * info on what data will be in a frame flagged by any of
+ * these errors. For parity error, it is the last byte in
+ * the buffer that had the error. As for the rest, I guess
+ * we'll assume there is no data in the buffer.
+ * If there is...it gets lost.
+ */
+ if (unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR |
+ SDMA_DESC_CMDSTAT_FR | SDMA_DESC_CMDSTAT_OR))) {
+
+ pi->port.icount.rx++;
+
+ if (cmdstat & SDMA_DESC_CMDSTAT_BR) { /* Break */
+ pi->port.icount.brk++;
+
+ if (uart_handle_break(&pi->port))
+ goto next_frame;
+ }
+ else if (cmdstat & SDMA_DESC_CMDSTAT_FR)/* Framing */
+ pi->port.icount.frame++;
+ else if (cmdstat & SDMA_DESC_CMDSTAT_OR) /* Overrun */
+ pi->port.icount.overrun++;
+
+ cmdstat &= pi->port.read_status_mask;
+
+ if (cmdstat & SDMA_DESC_CMDSTAT_BR)
+ flag = TTY_BREAK;
+ else if (cmdstat & SDMA_DESC_CMDSTAT_FR)
+ flag = TTY_FRAME;
+ else if (cmdstat & SDMA_DESC_CMDSTAT_OR)
+ flag = TTY_OVERRUN;
+ else if (cmdstat & SDMA_DESC_CMDSTAT_PE)
+ flag = TTY_PARITY;
+ }
+
+ if (uart_handle_sysrq_char(&pi->port, *bp, regs)) {
+ bp++;
+ bytes_in--;
+ goto next_frame;
+ }
+
+ if ((unlikely(cmdstat & (SDMA_DESC_CMDSTAT_BR |
+ SDMA_DESC_CMDSTAT_FR | SDMA_DESC_CMDSTAT_OR))) &&
+ !(cmdstat & pi->port.ignore_status_mask))
+
+ tty_insert_flip_char(tty, *bp, flag);
+ else {
+ for (i=0; i<bytes_in; i++)
+ tty_insert_flip_char(tty, *bp++, TTY_NORMAL);
+
+ pi->port.icount.rx += bytes_in;
+ }
+
+next_frame:
+ rxre->bytecnt = cpu_to_be16(0);
+ wmb();
+ rxre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O |
+ SDMA_DESC_CMDSTAT_EI |
+ SDMA_DESC_CMDSTAT_F |
+ SDMA_DESC_CMDSTAT_L);
+ wmb();
+ dma_cache_sync((void *)rxre, MPSC_RXRE_SIZE, DMA_BIDIRECTIONAL);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+ if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+ flush_dcache_range((ulong)rxre,
+ (ulong)rxre + MPSC_RXRE_SIZE);
+#endif
+
+ /* Advance to next descriptor */
+ pi->rxr_posn = (pi->rxr_posn + 1) & (MPSC_RXR_ENTRIES - 1);
+ rxre = (struct mpsc_rx_desc *)(pi->rxr +
+ (pi->rxr_posn * MPSC_RXRE_SIZE));
+ dma_cache_sync((void *)rxre, MPSC_RXRE_SIZE, DMA_FROM_DEVICE);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+ if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+ invalidate_dcache_range((ulong)rxre,
+ (ulong)rxre + MPSC_RXRE_SIZE);
+#endif
+
+ rc = 1;
+ }
+
+ /* Restart rx engine, if its stopped */
+ if ((readl(pi->sdma_base + SDMA_SDCM) & SDMA_SDCM_ERD) == 0)
+ mpsc_start_rx(pi);
+
+ tty_flip_buffer_push(tty);
+ return rc;
+}
+
+static inline void
+mpsc_setup_tx_desc(struct mpsc_port_info *pi, u32 count, u32 intr)
+{
+ struct mpsc_tx_desc *txre;
+
+ txre = (struct mpsc_tx_desc *)(pi->txr +
+ (pi->txr_head * MPSC_TXRE_SIZE));
+
+ txre->bytecnt = cpu_to_be16(count);
+ txre->shadow = txre->bytecnt;
+ wmb(); /* ensure cmdstat is last field updated */
+ txre->cmdstat = cpu_to_be32(SDMA_DESC_CMDSTAT_O | SDMA_DESC_CMDSTAT_F |
+ SDMA_DESC_CMDSTAT_L | ((intr) ?
+ SDMA_DESC_CMDSTAT_EI
+ : 0));
+ wmb();
+ dma_cache_sync((void *) txre, MPSC_TXRE_SIZE, DMA_BIDIRECTIONAL);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+ if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+ flush_dcache_range((ulong)txre,
+ (ulong)txre + MPSC_TXRE_SIZE);
+#endif
+
+ return;
+}
+
+static inline void
+mpsc_copy_tx_data(struct mpsc_port_info *pi)
+{
+ struct circ_buf *xmit = &pi->port.info->xmit;
+ u8 *bp;
+ u32 i;
+
+ /* Make sure the desc ring isn't full */
+ while (CIRC_CNT(pi->txr_head, pi->txr_tail, MPSC_TXR_ENTRIES) <
+ (MPSC_TXR_ENTRIES - 1)) {
+ if (pi->port.x_char) {
+ /*
+ * Ideally, we should use the TCS field in
+ * CHR_1 to put the x_char out immediately but
+ * errata prevents us from being able to read
+ * CHR_2 to know that its safe to write to
+ * CHR_1. Instead, just put it in-band with
+ * all the other Tx data.
+ */
+ bp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE);
+ *bp = pi->port.x_char;
+ pi->port.x_char = 0;
+ i = 1;
+ }
+ else if (!uart_circ_empty(xmit) && !uart_tx_stopped(&pi->port)){
+ i = min((u32) MPSC_TXBE_SIZE,
+ (u32) uart_circ_chars_pending(xmit));
+ i = min(i, (u32) CIRC_CNT_TO_END(xmit->head, xmit->tail,
+ UART_XMIT_SIZE));
+ bp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE);
+ memcpy(bp, &xmit->buf[xmit->tail], i);
+ xmit->tail = (xmit->tail + i) & (UART_XMIT_SIZE - 1);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&pi->port);
+ }
+ else /* All tx data copied into ring bufs */
+ return;
+
+ dma_cache_sync((void *) bp, MPSC_TXBE_SIZE, DMA_BIDIRECTIONAL);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+ if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+ flush_dcache_range((ulong)bp,
+ (ulong)bp + MPSC_TXBE_SIZE);
+#endif
+ mpsc_setup_tx_desc(pi, i, 1);
+
+ /* Advance to next descriptor */
+ pi->txr_head = (pi->txr_head + 1) & (MPSC_TXR_ENTRIES - 1);
+ }
+
+ return;
+}
+
+static inline int
+mpsc_tx_intr(struct mpsc_port_info *pi)
+{
+ struct mpsc_tx_desc *txre;
+ int rc = 0;
+
+ if (!mpsc_sdma_tx_active(pi)) {
+ txre = (struct mpsc_tx_desc *)(pi->txr +
+ (pi->txr_tail * MPSC_TXRE_SIZE));
+
+ dma_cache_sync((void *) txre, MPSC_TXRE_SIZE, DMA_FROM_DEVICE);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+ if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+ invalidate_dcache_range((ulong)txre,
+ (ulong)txre + MPSC_TXRE_SIZE);
+#endif
+
+ while (!(be32_to_cpu(txre->cmdstat) & SDMA_DESC_CMDSTAT_O)) {
+ rc = 1;
+ pi->port.icount.tx += be16_to_cpu(txre->bytecnt);
+ pi->txr_tail = (pi->txr_tail+1) & (MPSC_TXR_ENTRIES-1);
+
+ /* If no more data to tx, fall out of loop */
+ if (pi->txr_head == pi->txr_tail)
+ break;
+
+ txre = (struct mpsc_tx_desc *)(pi->txr +
+ (pi->txr_tail * MPSC_TXRE_SIZE));
+ dma_cache_sync((void *) txre, MPSC_TXRE_SIZE,
+ DMA_FROM_DEVICE);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+ if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+ invalidate_dcache_range((ulong)txre,
+ (ulong)txre + MPSC_TXRE_SIZE);
+#endif
+ }
+
+ mpsc_copy_tx_data(pi);
+ mpsc_sdma_start_tx(pi); /* start next desc if ready */
+ }
+
+ return rc;
+}
+
+/*
+ * This is the driver's interrupt handler. To avoid a race, we first clear
+ * the interrupt, then handle any completed Rx/Tx descriptors. When done
+ * handling those descriptors, we restart the Rx/Tx engines if they're stopped.
+ */
+static irqreturn_t
+mpsc_sdma_intr(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct mpsc_port_info *pi = dev_id;
+ ulong iflags;
+ int rc = IRQ_NONE;
+
+ pr_debug("mpsc_sdma_intr[%d]: SDMA Interrupt Received\n",pi->port.line);
+
+ spin_lock_irqsave(&pi->port.lock, iflags);
+ mpsc_sdma_intr_ack(pi);
+ if (mpsc_rx_intr(pi, regs))
+ rc = IRQ_HANDLED;
+ if (mpsc_tx_intr(pi))
+ rc = IRQ_HANDLED;
+ spin_unlock_irqrestore(&pi->port.lock, iflags);
+
+ pr_debug("mpsc_sdma_intr[%d]: SDMA Interrupt Handled\n", pi->port.line);
+ return rc;
+}
+
+/*
+ ******************************************************************************
+ *
+ * serial_core.c Interface routines
+ *
+ ******************************************************************************
+ */
+static uint
+mpsc_tx_empty(struct uart_port *port)
+{
+ struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+ ulong iflags;
+ uint rc;
+
+ spin_lock_irqsave(&pi->port.lock, iflags);
+ rc = mpsc_sdma_tx_active(pi) ? 0 : TIOCSER_TEMT;
+ spin_unlock_irqrestore(&pi->port.lock, iflags);
+
+ return rc;
+}
+
+static void
+mpsc_set_mctrl(struct uart_port *port, uint mctrl)
+{
+ /* Have no way to set modem control lines AFAICT */
+ return;
+}
+
+static uint
+mpsc_get_mctrl(struct uart_port *port)
+{
+ struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+ u32 mflags, status;
+ ulong iflags;
+
+ spin_lock_irqsave(&pi->port.lock, iflags);
+ status = (pi->mirror_regs) ? pi->MPSC_CHR_10_m :
+ readl(pi->mpsc_base + MPSC_CHR_10);
+ spin_unlock_irqrestore(&pi->port.lock, iflags);
+
+ mflags = 0;
+ if (status & 0x1)
+ mflags |= TIOCM_CTS;
+ if (status & 0x2)
+ mflags |= TIOCM_CAR;
+
+ return mflags | TIOCM_DSR; /* No way to tell if DSR asserted */
+}
+
+static void
+mpsc_stop_tx(struct uart_port *port, uint tty_start)
+{
+ struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+
+ pr_debug("mpsc_stop_tx[%d]: tty_start: %d\n", port->line, tty_start);
+
+ mpsc_freeze(pi);
+ return;
+}
+
+static void
+mpsc_start_tx(struct uart_port *port, uint tty_start)
+{
+ struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+
+ mpsc_unfreeze(pi);
+ mpsc_copy_tx_data(pi);
+ mpsc_sdma_start_tx(pi);
+
+ pr_debug("mpsc_start_tx[%d]: tty_start: %d\n", port->line, tty_start);
+ return;
+}
+
+static void
+mpsc_start_rx(struct mpsc_port_info *pi)
+{
+ pr_debug("mpsc_start_rx[%d]: Starting...\n", pi->port.line);
+
+ if (pi->rcv_data) {
+ mpsc_enter_hunt(pi);
+ mpsc_sdma_cmd(pi, SDMA_SDCM_ERD);
+ }
+ return;
+}
+
+static void
+mpsc_stop_rx(struct uart_port *port)
+{
+ struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+
+ pr_debug("mpsc_stop_rx[%d]: Stopping...\n", port->line);
+
+ mpsc_sdma_cmd(pi, SDMA_SDCM_AR);
+ return;
+}
+
+static void
+mpsc_enable_ms(struct uart_port *port)
+{
+ return; /* Not supported */
+}
+
+static void
+mpsc_break_ctl(struct uart_port *port, int ctl)
+{
+ struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+ ulong flags;
+ u32 v;
+
+ v = ctl ? 0x00ff0000 : 0;
+
+ spin_lock_irqsave(&pi->port.lock, flags);
+ if (pi->mirror_regs)
+ pi->MPSC_CHR_1_m = v;
+ writel(v, pi->mpsc_base + MPSC_CHR_1);
+ spin_unlock_irqrestore(&pi->port.lock, flags);
+
+ return;
+}
+
+static int
+mpsc_startup(struct uart_port *port)
+{
+ struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+ u32 flag = 0;
+ int rc;
+
+ pr_debug("mpsc_startup[%d]: Starting up MPSC, irq: %d\n",
+ port->line, pi->port.irq);
+
+ if ((rc = mpsc_make_ready(pi)) == 0) {
+ /* Setup IRQ handler */
+ mpsc_sdma_intr_ack(pi);
+
+ /* If irq's are shared, need to set flag */
+ if (mpsc_ports[0].port.irq == mpsc_ports[1].port.irq)
+ flag = SA_SHIRQ;
+
+ if (request_irq(pi->port.irq, mpsc_sdma_intr, flag,
+ "mpsc/sdma", pi))
+ printk(KERN_ERR "MPSC: Can't get SDMA IRQ %d\n",
+ pi->port.irq);
+
+ mpsc_sdma_intr_unmask(pi, 0xf);
+ mpsc_sdma_set_rx_ring(pi, (struct mpsc_rx_desc *)(pi->rxr_p +
+ (pi->rxr_posn * MPSC_RXRE_SIZE)));
+ }
+
+ return rc;
+}
+
+static void
+mpsc_shutdown(struct uart_port *port)
+{
+ struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+ static void mpsc_release_port(struct uart_port *port);
+
+ pr_debug("mpsc_shutdown[%d]: Shutting down MPSC\n", port->line);
+
+ mpsc_sdma_stop(pi);
+ free_irq(pi->port.irq, pi);
+ return;
+}
+
+static void
+mpsc_set_termios(struct uart_port *port, struct termios *termios,
+ struct termios *old)
+{
+ struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+ u32 baud;
+ ulong flags;
+ u32 chr_bits, stop_bits, par;
+
+ pi->c_iflag = termios->c_iflag;
+ pi->c_cflag = termios->c_cflag;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ chr_bits = MPSC_MPCR_CL_5;
+ break;
+ case CS6:
+ chr_bits = MPSC_MPCR_CL_6;
+ break;
+ case CS7:
+ chr_bits = MPSC_MPCR_CL_7;
+ break;
+ case CS8:
+ default:
+ chr_bits = MPSC_MPCR_CL_8;
+ break;
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ stop_bits = MPSC_MPCR_SBL_2;
+ else
+ stop_bits = MPSC_MPCR_SBL_1;
+
+ par = MPSC_CHR_2_PAR_EVEN;
+ if (termios->c_cflag & PARENB)
+ if (termios->c_cflag & PARODD)
+ par = MPSC_CHR_2_PAR_ODD;
+#ifdef CMSPAR
+ if (termios->c_cflag & CMSPAR) {
+ if (termios->c_cflag & PARODD)
+ par = MPSC_CHR_2_PAR_MARK;
+ else
+ par = MPSC_CHR_2_PAR_SPACE;
+ }
+#endif
+
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk);
+
+ spin_lock_irqsave(&pi->port.lock, flags);
+
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ mpsc_set_char_length(pi, chr_bits);
+ mpsc_set_stop_bit_length(pi, stop_bits);
+ mpsc_set_parity(pi, par);
+ mpsc_set_baudrate(pi, baud);
+
+ /* Characters/events to read */
+ pi->rcv_data = 1;
+ pi->port.read_status_mask = SDMA_DESC_CMDSTAT_OR;
+
+ if (termios->c_iflag & INPCK)
+ pi->port.read_status_mask |= SDMA_DESC_CMDSTAT_PE |
+ SDMA_DESC_CMDSTAT_FR;
+
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ pi->port.read_status_mask |= SDMA_DESC_CMDSTAT_BR;
+
+ /* Characters/events to ignore */
+ pi->port.ignore_status_mask = 0;
+
+ if (termios->c_iflag & IGNPAR)
+ pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_PE |
+ SDMA_DESC_CMDSTAT_FR;
+
+ if (termios->c_iflag & IGNBRK) {
+ pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_BR;
+
+ if (termios->c_iflag & IGNPAR)
+ pi->port.ignore_status_mask |= SDMA_DESC_CMDSTAT_OR;
+ }
+
+ /* Ignore all chars if CREAD not set */
+ if (!(termios->c_cflag & CREAD))
+ pi->rcv_data = 0;
+ else
+ mpsc_start_rx(pi);
+
+ spin_unlock_irqrestore(&pi->port.lock, flags);
+ return;
+}
+
+static const char *
+mpsc_type(struct uart_port *port)
+{
+ pr_debug("mpsc_type[%d]: port type: %s\n", port->line,MPSC_DRIVER_NAME);
+ return MPSC_DRIVER_NAME;
+}
+
+static int
+mpsc_request_port(struct uart_port *port)
+{
+ /* Should make chip/platform specific call */
+ return 0;
+}
+
+static void
+mpsc_release_port(struct uart_port *port)
+{
+ struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+
+ if (pi->ready) {
+ mpsc_uninit_rings(pi);
+ mpsc_free_ring_mem(pi);
+ pi->ready = 0;
+ }
+
+ return;
+}
+
+static void
+mpsc_config_port(struct uart_port *port, int flags)
+{
+ return;
+}
+
+static int
+mpsc_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ struct mpsc_port_info *pi = (struct mpsc_port_info *)port;
+ int rc = 0;
+
+ pr_debug("mpsc_verify_port[%d]: Verifying port data\n", pi->port.line);
+
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_MPSC)
+ rc = -EINVAL;
+ else if (pi->port.irq != ser->irq)
+ rc = -EINVAL;
+ else if (ser->io_type != SERIAL_IO_MEM)
+ rc = -EINVAL;
+ else if (pi->port.uartclk / 16 != ser->baud_base) /* Not sure */
+ rc = -EINVAL;
+ else if ((void *)pi->port.mapbase != ser->iomem_base)
+ rc = -EINVAL;
+ else if (pi->port.iobase != ser->port)
+ rc = -EINVAL;
+ else if (ser->hub6 != 0)
+ rc = -EINVAL;
+
+ return rc;
+}
+
+static struct uart_ops mpsc_pops = {
+ .tx_empty = mpsc_tx_empty,
+ .set_mctrl = mpsc_set_mctrl,
+ .get_mctrl = mpsc_get_mctrl,
+ .stop_tx = mpsc_stop_tx,
+ .start_tx = mpsc_start_tx,
+ .stop_rx = mpsc_stop_rx,
+ .enable_ms = mpsc_enable_ms,
+ .break_ctl = mpsc_break_ctl,
+ .startup = mpsc_startup,
+ .shutdown = mpsc_shutdown,
+ .set_termios = mpsc_set_termios,
+ .type = mpsc_type,
+ .release_port = mpsc_release_port,
+ .request_port = mpsc_request_port,
+ .config_port = mpsc_config_port,
+ .verify_port = mpsc_verify_port,
+};
+
+/*
+ ******************************************************************************
+ *
+ * Console Interface Routines
+ *
+ ******************************************************************************
+ */
+
+#ifdef CONFIG_SERIAL_MPSC_CONSOLE
+static void
+mpsc_console_write(struct console *co, const char *s, uint count)
+{
+ struct mpsc_port_info *pi = &mpsc_ports[co->index];
+ u8 *bp, *dp, add_cr = 0;
+ int i;
+
+ while (mpsc_sdma_tx_active(pi))
+ udelay(100);
+
+ while (count > 0) {
+ bp = dp = pi->txb + (pi->txr_head * MPSC_TXBE_SIZE);
+
+ for (i = 0; i < MPSC_TXBE_SIZE; i++) {
+ if (count == 0)
+ break;
+
+ if (add_cr) {
+ *(dp++) = '\r';
+ add_cr = 0;
+ }
+ else {
+ *(dp++) = *s;
+
+ if (*(s++) == '\n') { /* add '\r' after '\n' */
+ add_cr = 1;
+ count++;
+ }
+ }
+
+ count--;
+ }
+
+ dma_cache_sync((void *) bp, MPSC_TXBE_SIZE, DMA_BIDIRECTIONAL);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+ if (pi->cache_mgmt) /* GT642[46]0 Res #COMM-2 */
+ flush_dcache_range((ulong)bp,
+ (ulong)bp + MPSC_TXBE_SIZE);
+#endif
+ mpsc_setup_tx_desc(pi, i, 0);
+ pi->txr_head = (pi->txr_head + 1) & (MPSC_TXR_ENTRIES - 1);
+ mpsc_sdma_start_tx(pi);
+
+ while (mpsc_sdma_tx_active(pi))
+ udelay(100);
+
+ pi->txr_tail = (pi->txr_tail + 1) & (MPSC_TXR_ENTRIES - 1);
+ }
+
+ return;
+}
+
+static int __init
+mpsc_console_setup(struct console *co, char *options)
+{
+ struct mpsc_port_info *pi;
+ int baud, bits, parity, flow;
+
+ pr_debug("mpsc_console_setup[%d]: options: %s\n", co->index, options);
+
+ if (co->index >= MPSC_NUM_CTLRS)
+ co->index = 0;
+
+ pi = &mpsc_ports[co->index];
+
+ baud = pi->default_baud;
+ bits = pi->default_bits;
+ parity = pi->default_parity;
+ flow = pi->default_flow;
+
+ if (!pi->port.ops)
+ return -ENODEV;
+
+ spin_lock_init(&pi->port.lock); /* Temporary fix--copied from 8250.c */
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(&pi->port, co, baud, parity, bits, flow);
+}
+
+extern struct uart_driver mpsc_reg;
+static struct console mpsc_console = {
+ .name = MPSC_DEV_NAME,
+ .write = mpsc_console_write,
+ .device = uart_console_device,
+ .setup = mpsc_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &mpsc_reg,
+};
+
+static int __init
+mpsc_late_console_init(void)
+{
+ pr_debug("mpsc_late_console_init: Enter\n");
+
+ if (!(mpsc_console.flags & CON_ENABLED))
+ register_console(&mpsc_console);
+ return 0;
+}
+
+late_initcall(mpsc_late_console_init);
+
+#define MPSC_CONSOLE &mpsc_console
+#else
+#define MPSC_CONSOLE NULL
+#endif
+/*
+ ******************************************************************************
+ *
+ * Dummy Platform Driver to extract & map shared register regions
+ *
+ ******************************************************************************
+ */
+static void
+mpsc_resource_err(char *s)
+{
+ printk(KERN_WARNING "MPSC: Platform device resource error in %s\n", s);
+ return;
+}
+
+static int
+mpsc_shared_map_regs(struct platform_device *pd)
+{
+ struct resource *r;
+
+ if ((r = platform_get_resource(pd, IORESOURCE_MEM,
+ MPSC_ROUTING_BASE_ORDER)) && request_mem_region(r->start,
+ MPSC_ROUTING_REG_BLOCK_SIZE, "mpsc_routing_regs")) {
+
+ mpsc_shared_regs.mpsc_routing_base = ioremap(r->start,
+ MPSC_ROUTING_REG_BLOCK_SIZE);
+ mpsc_shared_regs.mpsc_routing_base_p = r->start;
+ }
+ else {
+ mpsc_resource_err("MPSC routing base");
+ return -ENOMEM;
+ }
+
+ if ((r = platform_get_resource(pd, IORESOURCE_MEM,
+ MPSC_SDMA_INTR_BASE_ORDER)) && request_mem_region(r->start,
+ MPSC_SDMA_INTR_REG_BLOCK_SIZE, "sdma_intr_regs")) {
+
+ mpsc_shared_regs.sdma_intr_base = ioremap(r->start,
+ MPSC_SDMA_INTR_REG_BLOCK_SIZE);
+ mpsc_shared_regs.sdma_intr_base_p = r->start;
+ }
+ else {
+ iounmap(mpsc_shared_regs.mpsc_routing_base);
+ release_mem_region(mpsc_shared_regs.mpsc_routing_base_p,
+ MPSC_ROUTING_REG_BLOCK_SIZE);
+ mpsc_resource_err("SDMA intr base");
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static void
+mpsc_shared_unmap_regs(void)
+{
+ if (!mpsc_shared_regs.mpsc_routing_base) {
+ iounmap(mpsc_shared_regs.mpsc_routing_base);
+ release_mem_region(mpsc_shared_regs.mpsc_routing_base_p,
+ MPSC_ROUTING_REG_BLOCK_SIZE);
+ }
+ if (!mpsc_shared_regs.sdma_intr_base) {
+ iounmap(mpsc_shared_regs.sdma_intr_base);
+ release_mem_region(mpsc_shared_regs.sdma_intr_base_p,
+ MPSC_SDMA_INTR_REG_BLOCK_SIZE);
+ }
+
+ mpsc_shared_regs.mpsc_routing_base = 0;
+ mpsc_shared_regs.sdma_intr_base = 0;
+
+ mpsc_shared_regs.mpsc_routing_base_p = 0;
+ mpsc_shared_regs.sdma_intr_base_p = 0;
+
+ return;
+}
+
+static int
+mpsc_shared_drv_probe(struct device *dev)
+{
+ struct platform_device *pd = to_platform_device(dev);
+ struct mpsc_shared_pdata *pdata;
+ int rc = -ENODEV;
+
+ if (pd->id == 0) {
+ if (!(rc = mpsc_shared_map_regs(pd))) {
+ pdata = (struct mpsc_shared_pdata *)dev->platform_data;
+
+ mpsc_shared_regs.MPSC_MRR_m = pdata->mrr_val;
+ mpsc_shared_regs.MPSC_RCRR_m= pdata->rcrr_val;
+ mpsc_shared_regs.MPSC_TCRR_m= pdata->tcrr_val;
+ mpsc_shared_regs.SDMA_INTR_CAUSE_m =
+ pdata->intr_cause_val;
+ mpsc_shared_regs.SDMA_INTR_MASK_m =
+ pdata->intr_mask_val;
+
+ rc = 0;
+ }
+ }
+
+ return rc;
+}
+
+static int
+mpsc_shared_drv_remove(struct device *dev)
+{
+ struct platform_device *pd = to_platform_device(dev);
+ int rc = -ENODEV;
+
+ if (pd->id == 0) {
+ mpsc_shared_unmap_regs();
+ mpsc_shared_regs.MPSC_MRR_m = 0;
+ mpsc_shared_regs.MPSC_RCRR_m = 0;
+ mpsc_shared_regs.MPSC_TCRR_m = 0;
+ mpsc_shared_regs.SDMA_INTR_CAUSE_m = 0;
+ mpsc_shared_regs.SDMA_INTR_MASK_m = 0;
+ rc = 0;
+ }
+
+ return rc;
+}
+
+static struct device_driver mpsc_shared_driver = {
+ .name = MPSC_SHARED_NAME,
+ .bus = &platform_bus_type,
+ .probe = mpsc_shared_drv_probe,
+ .remove = mpsc_shared_drv_remove,
+};
+
+/*
+ ******************************************************************************
+ *
+ * Driver Interface Routines
+ *
+ ******************************************************************************
+ */
+static struct uart_driver mpsc_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = MPSC_DRIVER_NAME,
+ .devfs_name = MPSC_DEVFS_NAME,
+ .dev_name = MPSC_DEV_NAME,
+ .major = MPSC_MAJOR,
+ .minor = MPSC_MINOR_START,
+ .nr = MPSC_NUM_CTLRS,
+ .cons = MPSC_CONSOLE,
+};
+
+static int
+mpsc_drv_map_regs(struct mpsc_port_info *pi, struct platform_device *pd)
+{
+ struct resource *r;
+
+ if ((r = platform_get_resource(pd, IORESOURCE_MEM, MPSC_BASE_ORDER)) &&
+ request_mem_region(r->start, MPSC_REG_BLOCK_SIZE, "mpsc_regs")){
+
+ pi->mpsc_base = ioremap(r->start, MPSC_REG_BLOCK_SIZE);
+ pi->mpsc_base_p = r->start;
+ }
+ else {
+ mpsc_resource_err("MPSC base");
+ return -ENOMEM;
+ }
+
+ if ((r = platform_get_resource(pd, IORESOURCE_MEM,
+ MPSC_SDMA_BASE_ORDER)) && request_mem_region(r->start,
+ MPSC_SDMA_REG_BLOCK_SIZE, "sdma_regs")) {
+
+ pi->sdma_base = ioremap(r->start,MPSC_SDMA_REG_BLOCK_SIZE);
+ pi->sdma_base_p = r->start;
+ }
+ else {
+ mpsc_resource_err("SDMA base");
+ return -ENOMEM;
+ }
+
+ if ((r = platform_get_resource(pd,IORESOURCE_MEM,MPSC_BRG_BASE_ORDER))
+ && request_mem_region(r->start, MPSC_BRG_REG_BLOCK_SIZE,
+ "brg_regs")) {
+
+ pi->brg_base = ioremap(r->start, MPSC_BRG_REG_BLOCK_SIZE);
+ pi->brg_base_p = r->start;
+ }
+ else {
+ mpsc_resource_err("BRG base");
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static void
+mpsc_drv_unmap_regs(struct mpsc_port_info *pi)
+{
+ if (!pi->mpsc_base) {
+ iounmap(pi->mpsc_base);
+ release_mem_region(pi->mpsc_base_p, MPSC_REG_BLOCK_SIZE);
+ }
+ if (!pi->sdma_base) {
+ iounmap(pi->sdma_base);
+ release_mem_region(pi->sdma_base_p, MPSC_SDMA_REG_BLOCK_SIZE);
+ }
+ if (!pi->brg_base) {
+ iounmap(pi->brg_base);
+ release_mem_region(pi->brg_base_p, MPSC_BRG_REG_BLOCK_SIZE);
+ }
+
+ pi->mpsc_base = 0;
+ pi->sdma_base = 0;
+ pi->brg_base = 0;
+
+ pi->mpsc_base_p = 0;
+ pi->sdma_base_p = 0;
+ pi->brg_base_p = 0;
+
+ return;
+}
+
+static void
+mpsc_drv_get_platform_data(struct mpsc_port_info *pi,
+ struct platform_device *pd, int num)
+{
+ struct mpsc_pdata *pdata;
+
+ pdata = (struct mpsc_pdata *)pd->dev.platform_data;
+
+ pi->port.uartclk = pdata->brg_clk_freq;
+ pi->port.iotype = UPIO_MEM;
+ pi->port.line = num;
+ pi->port.type = PORT_MPSC;
+ pi->port.fifosize = MPSC_TXBE_SIZE;
+ pi->port.membase = pi->mpsc_base;
+ pi->port.mapbase = (ulong)pi->mpsc_base;
+ pi->port.ops = &mpsc_pops;
+
+ pi->mirror_regs = pdata->mirror_regs;
+ pi->cache_mgmt = pdata->cache_mgmt;
+ pi->brg_can_tune = pdata->brg_can_tune;
+ pi->brg_clk_src = pdata->brg_clk_src;
+ pi->mpsc_max_idle = pdata->max_idle;
+ pi->default_baud = pdata->default_baud;
+ pi->default_bits = pdata->default_bits;
+ pi->default_parity = pdata->default_parity;
+ pi->default_flow = pdata->default_flow;
+
+ /* Initial values of mirrored regs */
+ pi->MPSC_CHR_1_m = pdata->chr_1_val;
+ pi->MPSC_CHR_2_m = pdata->chr_2_val;
+ pi->MPSC_CHR_10_m = pdata->chr_10_val;
+ pi->MPSC_MPCR_m = pdata->mpcr_val;
+ pi->BRG_BCR_m = pdata->bcr_val;
+
+ pi->shared_regs = &mpsc_shared_regs;
+
+ pi->port.irq = platform_get_irq(pd, 0);
+
+ return;
+}
+
+static int
+mpsc_drv_probe(struct device *dev)
+{
+ struct platform_device *pd = to_platform_device(dev);
+ struct mpsc_port_info *pi;
+ int rc = -ENODEV;
+
+ pr_debug("mpsc_drv_probe: Adding MPSC %d\n", pd->id);
+
+ if (pd->id < MPSC_NUM_CTLRS) {
+ pi = &mpsc_ports[pd->id];
+
+ if (!(rc = mpsc_drv_map_regs(pi, pd))) {
+ mpsc_drv_get_platform_data(pi, pd, pd->id);
+
+ if (!(rc = mpsc_make_ready(pi)))
+ if (!(rc = uart_add_one_port(&mpsc_reg,
+ &pi->port)))
+ rc = 0;
+ else {
+ mpsc_release_port(
+ (struct uart_port *)pi);
+ mpsc_drv_unmap_regs(pi);
+ }
+ else
+ mpsc_drv_unmap_regs(pi);
+ }
+ }
+
+ return rc;
+}
+
+static int
+mpsc_drv_remove(struct device *dev)
+{
+ struct platform_device *pd = to_platform_device(dev);
+
+ pr_debug("mpsc_drv_exit: Removing MPSC %d\n", pd->id);
+
+ if (pd->id < MPSC_NUM_CTLRS) {
+ uart_remove_one_port(&mpsc_reg, &mpsc_ports[pd->id].port);
+ mpsc_release_port((struct uart_port *)&mpsc_ports[pd->id].port);
+ mpsc_drv_unmap_regs(&mpsc_ports[pd->id]);
+ return 0;
+ }
+ else
+ return -ENODEV;
+}
+
+static struct device_driver mpsc_driver = {
+ .name = MPSC_CTLR_NAME,
+ .bus = &platform_bus_type,
+ .probe = mpsc_drv_probe,
+ .remove = mpsc_drv_remove,
+};
+
+static int __init
+mpsc_drv_init(void)
+{
+ int rc;
+
+ printk(KERN_INFO "Serial: MPSC driver $Revision: 1.00 $\n");
+
+ memset(mpsc_ports, 0, sizeof(mpsc_ports));
+ memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs));
+
+ if (!(rc = uart_register_driver(&mpsc_reg))) {
+ if (!(rc = driver_register(&mpsc_shared_driver))) {
+ if ((rc = driver_register(&mpsc_driver))) {
+ driver_unregister(&mpsc_shared_driver);
+ uart_unregister_driver(&mpsc_reg);
+ }
+ }
+ else
+ uart_unregister_driver(&mpsc_reg);
+ }
+
+ return rc;
+
+}
+
+static void __exit
+mpsc_drv_exit(void)
+{
+ driver_unregister(&mpsc_driver);
+ driver_unregister(&mpsc_shared_driver);
+ uart_unregister_driver(&mpsc_reg);
+ memset(mpsc_ports, 0, sizeof(mpsc_ports));
+ memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs));
+ return;
+}
+
+module_init(mpsc_drv_init);
+module_exit(mpsc_drv_exit);
+
+MODULE_AUTHOR("Mark A. Greer <mgreer@mvista.com>");
+MODULE_DESCRIPTION("Generic Marvell MPSC serial/UART driver $Revision: 1.00 $");
+MODULE_VERSION(MPSC_VERSION);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_CHARDEV_MAJOR(MPSC_MAJOR);
diff --git a/drivers/serial/mpsc.h b/drivers/serial/mpsc.h
new file mode 100644
index 00000000000..1f7294b7095
--- /dev/null
+++ b/drivers/serial/mpsc.h
@@ -0,0 +1,289 @@
+/*
+ * drivers/serial/mpsc.h
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2004 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __MPSC_H__
+#define __MPSC_H__
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/mv643xx.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#if defined(CONFIG_SERIAL_MPSC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#define MPSC_NUM_CTLRS 2
+
+/*
+ * Descriptors and buffers must be cache line aligned.
+ * Buffers lengths must be multiple of cache line size.
+ * Number of Tx & Rx descriptors must be powers of 2.
+ */
+#define MPSC_RXR_ENTRIES 32
+#define MPSC_RXRE_SIZE dma_get_cache_alignment()
+#define MPSC_RXR_SIZE (MPSC_RXR_ENTRIES * MPSC_RXRE_SIZE)
+#define MPSC_RXBE_SIZE dma_get_cache_alignment()
+#define MPSC_RXB_SIZE (MPSC_RXR_ENTRIES * MPSC_RXBE_SIZE)
+
+#define MPSC_TXR_ENTRIES 32
+#define MPSC_TXRE_SIZE dma_get_cache_alignment()
+#define MPSC_TXR_SIZE (MPSC_TXR_ENTRIES * MPSC_TXRE_SIZE)
+#define MPSC_TXBE_SIZE dma_get_cache_alignment()
+#define MPSC_TXB_SIZE (MPSC_TXR_ENTRIES * MPSC_TXBE_SIZE)
+
+#define MPSC_DMA_ALLOC_SIZE (MPSC_RXR_SIZE + MPSC_RXB_SIZE + \
+ MPSC_TXR_SIZE + MPSC_TXB_SIZE + \
+ dma_get_cache_alignment() /* for alignment */)
+
+/* Rx and Tx Ring entry descriptors -- assume entry size is <= cacheline size */
+struct mpsc_rx_desc {
+ u16 bufsize;
+ u16 bytecnt;
+ u32 cmdstat;
+ u32 link;
+ u32 buf_ptr;
+} __attribute((packed));
+
+struct mpsc_tx_desc {
+ u16 bytecnt;
+ u16 shadow;
+ u32 cmdstat;
+ u32 link;
+ u32 buf_ptr;
+} __attribute((packed));
+
+/*
+ * Some regs that have the erratum that you can't read them are are shared
+ * between the two MPSC controllers. This struct contains those shared regs.
+ */
+struct mpsc_shared_regs {
+ phys_addr_t mpsc_routing_base_p;
+ phys_addr_t sdma_intr_base_p;
+
+ void *mpsc_routing_base;
+ void *sdma_intr_base;
+
+ u32 MPSC_MRR_m;
+ u32 MPSC_RCRR_m;
+ u32 MPSC_TCRR_m;
+ u32 SDMA_INTR_CAUSE_m;
+ u32 SDMA_INTR_MASK_m;
+};
+
+/* The main driver data structure */
+struct mpsc_port_info {
+ struct uart_port port; /* Overlay uart_port structure */
+
+ /* Internal driver state for this ctlr */
+ u8 ready;
+ u8 rcv_data;
+ tcflag_t c_iflag; /* save termios->c_iflag */
+ tcflag_t c_cflag; /* save termios->c_cflag */
+
+ /* Info passed in from platform */
+ u8 mirror_regs; /* Need to mirror regs? */
+ u8 cache_mgmt; /* Need manual cache mgmt? */
+ u8 brg_can_tune; /* BRG has baud tuning? */
+ u32 brg_clk_src;
+ u16 mpsc_max_idle;
+ int default_baud;
+ int default_bits;
+ int default_parity;
+ int default_flow;
+
+ /* Physical addresses of various blocks of registers (from platform) */
+ phys_addr_t mpsc_base_p;
+ phys_addr_t sdma_base_p;
+ phys_addr_t brg_base_p;
+
+ /* Virtual addresses of various blocks of registers (from platform) */
+ void *mpsc_base;
+ void *sdma_base;
+ void *brg_base;
+
+ /* Descriptor ring and buffer allocations */
+ void *dma_region;
+ dma_addr_t dma_region_p;
+
+ dma_addr_t rxr; /* Rx descriptor ring */
+ dma_addr_t rxr_p; /* Phys addr of rxr */
+ u8 *rxb; /* Rx Ring I/O buf */
+ u8 *rxb_p; /* Phys addr of rxb */
+ u32 rxr_posn; /* First desc w/ Rx data */
+
+ dma_addr_t txr; /* Tx descriptor ring */
+ dma_addr_t txr_p; /* Phys addr of txr */
+ u8 *txb; /* Tx Ring I/O buf */
+ u8 *txb_p; /* Phys addr of txb */
+ int txr_head; /* Where new data goes */
+ int txr_tail; /* Where sent data comes off */
+
+ /* Mirrored values of regs we can't read (if 'mirror_regs' set) */
+ u32 MPSC_MPCR_m;
+ u32 MPSC_CHR_1_m;
+ u32 MPSC_CHR_2_m;
+ u32 MPSC_CHR_10_m;
+ u32 BRG_BCR_m;
+ struct mpsc_shared_regs *shared_regs;
+};
+
+/* Hooks to platform-specific code */
+int mpsc_platform_register_driver(void);
+void mpsc_platform_unregister_driver(void);
+
+/* Hooks back in to mpsc common to be called by platform-specific code */
+struct mpsc_port_info *mpsc_device_probe(int index);
+struct mpsc_port_info *mpsc_device_remove(int index);
+
+/*
+ *****************************************************************************
+ *
+ * Multi-Protocol Serial Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+/* Main Configuratino Register Offsets */
+#define MPSC_MMCRL 0x0000
+#define MPSC_MMCRH 0x0004
+#define MPSC_MPCR 0x0008
+#define MPSC_CHR_1 0x000c
+#define MPSC_CHR_2 0x0010
+#define MPSC_CHR_3 0x0014
+#define MPSC_CHR_4 0x0018
+#define MPSC_CHR_5 0x001c
+#define MPSC_CHR_6 0x0020
+#define MPSC_CHR_7 0x0024
+#define MPSC_CHR_8 0x0028
+#define MPSC_CHR_9 0x002c
+#define MPSC_CHR_10 0x0030
+#define MPSC_CHR_11 0x0034
+
+#define MPSC_MPCR_FRZ (1 << 9)
+#define MPSC_MPCR_CL_5 0
+#define MPSC_MPCR_CL_6 1
+#define MPSC_MPCR_CL_7 2
+#define MPSC_MPCR_CL_8 3
+#define MPSC_MPCR_SBL_1 0
+#define MPSC_MPCR_SBL_2 1
+
+#define MPSC_CHR_2_TEV (1<<1)
+#define MPSC_CHR_2_TA (1<<7)
+#define MPSC_CHR_2_TTCS (1<<9)
+#define MPSC_CHR_2_REV (1<<17)
+#define MPSC_CHR_2_RA (1<<23)
+#define MPSC_CHR_2_CRD (1<<25)
+#define MPSC_CHR_2_EH (1<<31)
+#define MPSC_CHR_2_PAR_ODD 0
+#define MPSC_CHR_2_PAR_SPACE 1
+#define MPSC_CHR_2_PAR_EVEN 2
+#define MPSC_CHR_2_PAR_MARK 3
+
+/* MPSC Signal Routing */
+#define MPSC_MRR 0x0000
+#define MPSC_RCRR 0x0004
+#define MPSC_TCRR 0x0008
+
+/*
+ *****************************************************************************
+ *
+ * Serial DMA Controller Interface Registers
+ *
+ *****************************************************************************
+ */
+
+#define SDMA_SDC 0x0000
+#define SDMA_SDCM 0x0008
+#define SDMA_RX_DESC 0x0800
+#define SDMA_RX_BUF_PTR 0x0808
+#define SDMA_SCRDP 0x0810
+#define SDMA_TX_DESC 0x0c00
+#define SDMA_SCTDP 0x0c10
+#define SDMA_SFTDP 0x0c14
+
+#define SDMA_DESC_CMDSTAT_PE (1<<0)
+#define SDMA_DESC_CMDSTAT_CDL (1<<1)
+#define SDMA_DESC_CMDSTAT_FR (1<<3)
+#define SDMA_DESC_CMDSTAT_OR (1<<6)
+#define SDMA_DESC_CMDSTAT_BR (1<<9)
+#define SDMA_DESC_CMDSTAT_MI (1<<10)
+#define SDMA_DESC_CMDSTAT_A (1<<11)
+#define SDMA_DESC_CMDSTAT_AM (1<<12)
+#define SDMA_DESC_CMDSTAT_CT (1<<13)
+#define SDMA_DESC_CMDSTAT_C (1<<14)
+#define SDMA_DESC_CMDSTAT_ES (1<<15)
+#define SDMA_DESC_CMDSTAT_L (1<<16)
+#define SDMA_DESC_CMDSTAT_F (1<<17)
+#define SDMA_DESC_CMDSTAT_P (1<<18)
+#define SDMA_DESC_CMDSTAT_EI (1<<23)
+#define SDMA_DESC_CMDSTAT_O (1<<31)
+
+#define SDMA_DESC_DFLT (SDMA_DESC_CMDSTAT_O | \
+ SDMA_DESC_CMDSTAT_EI)
+
+#define SDMA_SDC_RFT (1<<0)
+#define SDMA_SDC_SFM (1<<1)
+#define SDMA_SDC_BLMR (1<<6)
+#define SDMA_SDC_BLMT (1<<7)
+#define SDMA_SDC_POVR (1<<8)
+#define SDMA_SDC_RIFB (1<<9)
+
+#define SDMA_SDCM_ERD (1<<7)
+#define SDMA_SDCM_AR (1<<15)
+#define SDMA_SDCM_STD (1<<16)
+#define SDMA_SDCM_TXD (1<<23)
+#define SDMA_SDCM_AT (1<<31)
+
+#define SDMA_0_CAUSE_RXBUF (1<<0)
+#define SDMA_0_CAUSE_RXERR (1<<1)
+#define SDMA_0_CAUSE_TXBUF (1<<2)
+#define SDMA_0_CAUSE_TXEND (1<<3)
+#define SDMA_1_CAUSE_RXBUF (1<<8)
+#define SDMA_1_CAUSE_RXERR (1<<9)
+#define SDMA_1_CAUSE_TXBUF (1<<10)
+#define SDMA_1_CAUSE_TXEND (1<<11)
+
+#define SDMA_CAUSE_RX_MASK (SDMA_0_CAUSE_RXBUF | SDMA_0_CAUSE_RXERR | \
+ SDMA_1_CAUSE_RXBUF | SDMA_1_CAUSE_RXERR)
+#define SDMA_CAUSE_TX_MASK (SDMA_0_CAUSE_TXBUF | SDMA_0_CAUSE_TXEND | \
+ SDMA_1_CAUSE_TXBUF | SDMA_1_CAUSE_TXEND)
+
+/* SDMA Interrupt registers */
+#define SDMA_INTR_CAUSE 0x0000
+#define SDMA_INTR_MASK 0x0080
+
+/*
+ *****************************************************************************
+ *
+ * Baud Rate Generator Interface Registers
+ *
+ *****************************************************************************
+ */
+
+#define BRG_BCR 0x0000
+#define BRG_BTR 0x0004
+
+#endif /* __MPSC_H__ */
diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c
new file mode 100644
index 00000000000..dadd7e19714
--- /dev/null
+++ b/drivers/serial/mux.c
@@ -0,0 +1,539 @@
+/*
+** mux.c:
+** serial driver for the Mux console found in some PA-RISC servers.
+**
+** (c) Copyright 2002 Ryan Bradetich
+** (c) Copyright 2002 Hewlett-Packard Company
+**
+** This program is free software; you can redistribute it and/or modify
+** it under the terms of the GNU General Public License as published by
+** the Free Software Foundation; either version 2 of the License, or
+** (at your option) any later version.
+**
+** This Driver currently only supports the console (port 0) on the MUX.
+** Additional work will be needed on this driver to enable the full
+** functionality of the MUX.
+**
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/console.h>
+#include <linux/slab.h>
+#include <linux/delay.h> /* for udelay */
+#include <linux/device.h>
+#include <asm/io.h>
+#include <asm/parisc-device.h>
+
+#ifdef CONFIG_MAGIC_SYSRQ
+#include <linux/sysrq.h>
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/serial_core.h>
+
+#define MUX_OFFSET 0x800
+#define MUX_LINE_OFFSET 0x80
+
+#define MUX_FIFO_SIZE 255
+#define MUX_POLL_DELAY (30 * HZ / 1000)
+
+#define IO_DATA_REG_OFFSET 0x3c
+#define IO_DCOUNT_REG_OFFSET 0x40
+
+#define MUX_EOFIFO(status) ((status & 0xF000) == 0xF000)
+#define MUX_STATUS(status) ((status & 0xF000) == 0x8000)
+#define MUX_BREAK(status) ((status & 0xF000) == 0x2000)
+
+#define MUX_NR 256
+static unsigned int port_cnt = 0;
+static struct uart_port mux_ports[MUX_NR];
+
+static struct uart_driver mux_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "ttyB",
+ .dev_name = "ttyB",
+ .major = MUX_MAJOR,
+ .minor = 0,
+ .nr = MUX_NR,
+};
+
+static struct timer_list mux_timer;
+
+#define UART_PUT_CHAR(p, c) __raw_writel((c), (unsigned long)(p)->membase + IO_DATA_REG_OFFSET)
+#define UART_GET_FIFO_CNT(p) __raw_readl((unsigned long)(p)->membase + IO_DCOUNT_REG_OFFSET)
+#define GET_MUX_PORTS(iodc_data) ((((iodc_data)[4] & 0xf0) >> 4) * 8) + 8
+
+/**
+ * mux_tx_empty - Check if the transmitter fifo is empty.
+ * @port: Ptr to the uart_port.
+ *
+ * This function test if the transmitter fifo for the port
+ * described by 'port' is empty. If it is empty, this function
+ * should return TIOCSER_TEMT, otherwise return 0.
+ */
+static unsigned int mux_tx_empty(struct uart_port *port)
+{
+ unsigned int cnt = __raw_readl((unsigned long)port->membase
+ + IO_DCOUNT_REG_OFFSET);
+
+ return cnt ? 0 : TIOCSER_TEMT;
+}
+
+/**
+ * mux_set_mctrl - Set the current state of the modem control inputs.
+ * @ports: Ptr to the uart_port.
+ * @mctrl: Modem control bits.
+ *
+ * The Serial MUX does not support CTS, DCD or DSR so this function
+ * is ignored.
+ */
+static void mux_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+/**
+ * mux_get_mctrl - Returns the current state of modem control inputs.
+ * @port: Ptr to the uart_port.
+ *
+ * The Serial MUX does not support CTS, DCD or DSR so these lines are
+ * treated as permanently active.
+ */
+static unsigned int mux_get_mctrl(struct uart_port *port)
+{
+ return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+}
+
+/**
+ * mux_stop_tx - Stop transmitting characters.
+ * @port: Ptr to the uart_port.
+ * @tty_stop: tty layer issue this command?
+ *
+ * The Serial MUX does not support this function.
+ */
+static void mux_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+}
+
+/**
+ * mux_start_tx - Start transmitting characters.
+ * @port: Ptr to the uart_port.
+ * @tty_start: tty layer issue this command?
+ *
+ * The Serial Mux does not support this function.
+ */
+static void mux_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+}
+
+/**
+ * mux_stop_rx - Stop receiving characters.
+ * @port: Ptr to the uart_port.
+ *
+ * The Serial Mux does not support this function.
+ */
+static void mux_stop_rx(struct uart_port *port)
+{
+}
+
+/**
+ * mux_enable_ms - Enable modum status interrupts.
+ * @port: Ptr to the uart_port.
+ *
+ * The Serial Mux does not support this function.
+ */
+static void mux_enable_ms(struct uart_port *port)
+{
+}
+
+/**
+ * mux_break_ctl - Control the transmitssion of a break signal.
+ * @port: Ptr to the uart_port.
+ * @break_state: Raise/Lower the break signal.
+ *
+ * The Serial Mux does not support this function.
+ */
+static void mux_break_ctl(struct uart_port *port, int break_state)
+{
+}
+
+/**
+ * mux_write - Write chars to the mux fifo.
+ * @port: Ptr to the uart_port.
+ *
+ * This function writes all the data from the uart buffer to
+ * the mux fifo.
+ */
+static void mux_write(struct uart_port *port)
+{
+ int count;
+ struct circ_buf *xmit = &port->info->xmit;
+
+ if(port->x_char) {
+ UART_PUT_CHAR(port, port->x_char);
+ port->icount.tx++;
+ port->x_char = 0;
+ return;
+ }
+
+ if(uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ mux_stop_tx(port, 0);
+ return;
+ }
+
+ count = (port->fifosize) - UART_GET_FIFO_CNT(port);
+ do {
+ UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ if(uart_circ_empty(xmit))
+ break;
+
+ } while(--count > 0);
+
+ while(UART_GET_FIFO_CNT(port))
+ udelay(1);
+
+ if(uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit))
+ mux_stop_tx(port, 0);
+}
+
+/**
+ * mux_read - Read chars from the mux fifo.
+ * @port: Ptr to the uart_port.
+ *
+ * This reads all available data from the mux's fifo and pushes
+ * the data to the tty layer.
+ */
+static void mux_read(struct uart_port *port)
+{
+ int data;
+ struct tty_struct *tty = port->info->tty;
+ __u32 start_count = port->icount.rx;
+
+ while(1) {
+ data = __raw_readl((unsigned long)port->membase
+ + IO_DATA_REG_OFFSET);
+
+ if (MUX_STATUS(data))
+ continue;
+
+ if (MUX_EOFIFO(data))
+ break;
+
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+ continue;
+
+ *tty->flip.char_buf_ptr = data & 0xffu;
+ *tty->flip.flag_buf_ptr = TTY_NORMAL;
+ port->icount.rx++;
+
+ if (MUX_BREAK(data)) {
+ port->icount.brk++;
+ if(uart_handle_break(port))
+ continue;
+ }
+
+ if (uart_handle_sysrq_char(port, data & 0xffu, NULL))
+ continue;
+
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ tty->flip.count++;
+ }
+
+ if (start_count != port->icount.rx) {
+ tty_flip_buffer_push(tty);
+ }
+}
+
+/**
+ * mux_startup - Initialize the port.
+ * @port: Ptr to the uart_port.
+ *
+ * Grab any resources needed for this port and start the
+ * mux timer.
+ */
+static int mux_startup(struct uart_port *port)
+{
+ mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY);
+ return 0;
+}
+
+/**
+ * mux_shutdown - Disable the port.
+ * @port: Ptr to the uart_port.
+ *
+ * Release any resources needed for the port.
+ */
+static void mux_shutdown(struct uart_port *port)
+{
+}
+
+/**
+ * mux_set_termios - Chane port parameters.
+ * @port: Ptr to the uart_port.
+ * @termios: new termios settings.
+ * @old: old termios settings.
+ *
+ * The Serial Mux does not support this function.
+ */
+static void
+mux_set_termios(struct uart_port *port, struct termios *termios,
+ struct termios *old)
+{
+}
+
+/**
+ * mux_type - Describe the port.
+ * @port: Ptr to the uart_port.
+ *
+ * Return a pointer to a string constant describing the
+ * specified port.
+ */
+static const char *mux_type(struct uart_port *port)
+{
+ return "Mux";
+}
+
+/**
+ * mux_release_port - Release memory and IO regions.
+ * @port: Ptr to the uart_port.
+ *
+ * Release any memory and IO region resources currently in use by
+ * the port.
+ */
+static void mux_release_port(struct uart_port *port)
+{
+}
+
+/**
+ * mux_request_port - Request memory and IO regions.
+ * @port: Ptr to the uart_port.
+ *
+ * Request any memory and IO region resources required by the port.
+ * If any fail, no resources should be registered when this function
+ * returns, and it should return -EBUSY on failure.
+ */
+static int mux_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+/**
+ * mux_config_port - Perform port autoconfiguration.
+ * @port: Ptr to the uart_port.
+ * @type: Bitmask of required configurations.
+ *
+ * Perform any autoconfiguration steps for the port. This functino is
+ * called if the UPF_BOOT_AUTOCONF flag is specified for the port.
+ * [Note: This is required for now because of a bug in the Serial core.
+ * rmk has already submitted a patch to linus, should be available for
+ * 2.5.47.]
+ */
+static void mux_config_port(struct uart_port *port, int type)
+{
+ port->type = PORT_MUX;
+}
+
+/**
+ * mux_verify_port - Verify the port information.
+ * @port: Ptr to the uart_port.
+ * @ser: Ptr to the serial information.
+ *
+ * Verify the new serial port information contained within serinfo is
+ * suitable for this port type.
+ */
+static int mux_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ if(port->membase == NULL)
+ return -EINVAL;
+
+ return 0;
+}
+
+/**
+ * mux_drv_poll - Mux poll function.
+ * @unused: Unused variable
+ *
+ * This function periodically polls the Serial MUX to check for new data.
+ */
+static void mux_poll(unsigned long unused)
+{
+ int i;
+
+ for(i = 0; i < port_cnt; ++i) {
+ if(!mux_ports[i].info)
+ continue;
+
+ mux_read(&mux_ports[i]);
+ mux_write(&mux_ports[i]);
+ }
+
+ mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY);
+}
+
+
+#ifdef CONFIG_SERIAL_MUX_CONSOLE
+static void mux_console_write(struct console *co, const char *s, unsigned count)
+{
+ while(count--)
+ pdc_iodc_putc(*s++);
+}
+
+static int mux_console_setup(struct console *co, char *options)
+{
+ return 0;
+}
+
+struct tty_driver *mux_console_device(struct console *co, int *index)
+{
+ *index = co->index;
+ return mux_driver.tty_driver;
+}
+
+static struct console mux_console = {
+ .name = "ttyB",
+ .write = mux_console_write,
+ .device = mux_console_device,
+ .setup = mux_console_setup,
+ .flags = CON_ENABLED | CON_PRINTBUFFER,
+ .index = 0,
+};
+
+#define MUX_CONSOLE &mux_console
+#else
+#define MUX_CONSOLE NULL
+#endif
+
+static struct uart_ops mux_pops = {
+ .tx_empty = mux_tx_empty,
+ .set_mctrl = mux_set_mctrl,
+ .get_mctrl = mux_get_mctrl,
+ .stop_tx = mux_stop_tx,
+ .start_tx = mux_start_tx,
+ .stop_rx = mux_stop_rx,
+ .enable_ms = mux_enable_ms,
+ .break_ctl = mux_break_ctl,
+ .startup = mux_startup,
+ .shutdown = mux_shutdown,
+ .set_termios = mux_set_termios,
+ .type = mux_type,
+ .release_port = mux_release_port,
+ .request_port = mux_request_port,
+ .config_port = mux_config_port,
+ .verify_port = mux_verify_port,
+};
+
+/**
+ * mux_probe - Determine if the Serial Mux should claim this device.
+ * @dev: The parisc device.
+ *
+ * Deterimine if the Serial Mux should claim this chip (return 0)
+ * or not (return 1).
+ */
+static int __init mux_probe(struct parisc_device *dev)
+{
+ int i, status, ports;
+ u8 iodc_data[32];
+ unsigned long bytecnt;
+ struct uart_port *port;
+
+ status = pdc_iodc_read(&bytecnt, dev->hpa, 0, iodc_data, 32);
+ if(status != PDC_OK) {
+ printk(KERN_ERR "Serial mux: Unable to read IODC.\n");
+ return 1;
+ }
+
+ ports = GET_MUX_PORTS(iodc_data);
+ printk(KERN_INFO "Serial mux driver (%d ports) Revision: 0.3\n", ports);
+
+ if(!port_cnt) {
+ mux_driver.cons = MUX_CONSOLE;
+
+ status = uart_register_driver(&mux_driver);
+ if(status) {
+ printk(KERN_ERR "Serial mux: Unable to register driver.\n");
+ return 1;
+ }
+
+ init_timer(&mux_timer);
+ mux_timer.function = mux_poll;
+ }
+
+ for(i = 0; i < ports; ++i, ++port_cnt) {
+ port = &mux_ports[port_cnt];
+ port->iobase = 0;
+ port->mapbase = dev->hpa + MUX_OFFSET + (i * MUX_LINE_OFFSET);
+ port->membase = ioremap(port->mapbase, MUX_LINE_OFFSET);
+ port->iotype = SERIAL_IO_MEM;
+ port->type = PORT_MUX;
+ port->irq = SERIAL_IRQ_NONE;
+ port->uartclk = 0;
+ port->fifosize = MUX_FIFO_SIZE;
+ port->ops = &mux_pops;
+ port->flags = UPF_BOOT_AUTOCONF;
+ port->line = port_cnt;
+ status = uart_add_one_port(&mux_driver, port);
+ BUG_ON(status);
+ }
+
+#ifdef CONFIG_SERIAL_MUX_CONSOLE
+ register_console(&mux_console);
+#endif
+ return 0;
+}
+
+static struct parisc_device_id mux_tbl[] = {
+ { HPHW_A_DIRECT, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0000D },
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(parisc, mux_tbl);
+
+static struct parisc_driver serial_mux_driver = {
+ .name = "Serial MUX",
+ .id_table = mux_tbl,
+ .probe = mux_probe,
+};
+
+/**
+ * mux_init - Serial MUX initalization procedure.
+ *
+ * Register the Serial MUX driver.
+ */
+static int __init mux_init(void)
+{
+ return register_parisc_driver(&serial_mux_driver);
+}
+
+/**
+ * mux_exit - Serial MUX cleanup procedure.
+ *
+ * Unregister the Serial MUX driver from the tty layer.
+ */
+static void __exit mux_exit(void)
+{
+ int i;
+
+ for (i = 0; i < port_cnt; i++) {
+ uart_remove_one_port(&mux_driver, &mux_ports[i]);
+ }
+
+ uart_unregister_driver(&mux_driver);
+}
+
+module_init(mux_init);
+module_exit(mux_exit);
+
+MODULE_AUTHOR("Ryan Bradetich");
+MODULE_DESCRIPTION("Serial MUX driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_CHARDEV_MAJOR(MUX_MAJOR);
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
new file mode 100644
index 00000000000..0a6b9f0ed23
--- /dev/null
+++ b/drivers/serial/pmac_zilog.c
@@ -0,0 +1,2048 @@
+/*
+ * linux/drivers/serial/pmac_zilog.c
+ *
+ * Driver for PowerMac Z85c30 based ESCC cell found in the
+ * "macio" ASICs of various PowerMac models
+ *
+ * Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org)
+ *
+ * Derived from drivers/macintosh/macserial.c by Paul Mackerras
+ * and drivers/serial/sunzilog.c by David S. Miller
+ *
+ * Hrm... actually, I ripped most of sunzilog (Thanks David !) and
+ * adapted special tweaks needed for us. I don't think it's worth
+ * merging back those though. The DMA code still has to get in
+ * and once done, I expect that driver to remain fairly stable in
+ * the long term, unless we change the driver model again...
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * 2004-08-06 Harald Welte <laforge@gnumonks.org>
+ * - Enable BREAK interrupt
+ * - Add support for sysreq
+ *
+ * TODO: - Add DMA support
+ * - Defer port shutdown to a few seconds after close
+ * - maybe put something right into uap->clk_divisor
+ */
+
+#undef DEBUG
+#undef DEBUG_HARD
+#undef USE_CTRL_O_SYSRQ
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/tty.h>
+
+#include <linux/tty_flip.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/slab.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <linux/bitops.h>
+#include <linux/sysrq.h>
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/pmac_feature.h>
+#include <asm/dbdma.h>
+#include <asm/macio.h>
+#include <asm/semaphore.h>
+
+#if defined (CONFIG_SERIAL_PMACZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+
+#include "pmac_zilog.h"
+
+/* Not yet implemented */
+#undef HAS_DBDMA
+
+static char version[] __initdata = "pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)";
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("Driver for the PowerMac serial ports.");
+MODULE_LICENSE("GPL");
+
+#define PWRDBG(fmt, arg...) printk(KERN_DEBUG fmt , ## arg)
+
+
+/*
+ * For the sake of early serial console, we can do a pre-probe
+ * (optional) of the ports at rather early boot time.
+ */
+static struct uart_pmac_port pmz_ports[MAX_ZS_PORTS];
+static int pmz_ports_count;
+static DECLARE_MUTEX(pmz_irq_sem);
+
+static struct uart_driver pmz_uart_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "ttyS",
+ .devfs_name = "tts/",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+};
+
+
+/*
+ * Load all registers to reprogram the port
+ * This function must only be called when the TX is not busy. The UART
+ * port lock must be held and local interrupts disabled.
+ */
+static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs)
+{
+ int i;
+
+ if (ZS_IS_ASLEEP(uap))
+ return;
+
+ /* Let pending transmits finish. */
+ for (i = 0; i < 1000; i++) {
+ unsigned char stat = read_zsreg(uap, R1);
+ if (stat & ALL_SNT)
+ break;
+ udelay(100);
+ }
+
+ ZS_CLEARERR(uap);
+ zssync(uap);
+ ZS_CLEARFIFO(uap);
+ zssync(uap);
+ ZS_CLEARERR(uap);
+
+ /* Disable all interrupts. */
+ write_zsreg(uap, R1,
+ regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB));
+
+ /* Set parity, sync config, stop bits, and clock divisor. */
+ write_zsreg(uap, R4, regs[R4]);
+
+ /* Set misc. TX/RX control bits. */
+ write_zsreg(uap, R10, regs[R10]);
+
+ /* Set TX/RX controls sans the enable bits. */
+ write_zsreg(uap, R3, regs[R3] & ~RxENABLE);
+ write_zsreg(uap, R5, regs[R5] & ~TxENABLE);
+
+ /* now set R7 "prime" on ESCC */
+ write_zsreg(uap, R15, regs[R15] | EN85C30);
+ write_zsreg(uap, R7, regs[R7P]);
+
+ /* make sure we use R7 "non-prime" on ESCC */
+ write_zsreg(uap, R15, regs[R15] & ~EN85C30);
+
+ /* Synchronous mode config. */
+ write_zsreg(uap, R6, regs[R6]);
+ write_zsreg(uap, R7, regs[R7]);
+
+ /* Disable baud generator. */
+ write_zsreg(uap, R14, regs[R14] & ~BRENAB);
+
+ /* Clock mode control. */
+ write_zsreg(uap, R11, regs[R11]);
+
+ /* Lower and upper byte of baud rate generator divisor. */
+ write_zsreg(uap, R12, regs[R12]);
+ write_zsreg(uap, R13, regs[R13]);
+
+ /* Now rewrite R14, with BRENAB (if set). */
+ write_zsreg(uap, R14, regs[R14]);
+
+ /* Reset external status interrupts. */
+ write_zsreg(uap, R0, RES_EXT_INT);
+ write_zsreg(uap, R0, RES_EXT_INT);
+
+ /* Rewrite R3/R5, this time without enables masked. */
+ write_zsreg(uap, R3, regs[R3]);
+ write_zsreg(uap, R5, regs[R5]);
+
+ /* Rewrite R1, this time without IRQ enabled masked. */
+ write_zsreg(uap, R1, regs[R1]);
+
+ /* Enable interrupts */
+ write_zsreg(uap, R9, regs[R9]);
+}
+
+/*
+ * We do like sunzilog to avoid disrupting pending Tx
+ * Reprogram the Zilog channel HW registers with the copies found in the
+ * software state struct. If the transmitter is busy, we defer this update
+ * until the next TX complete interrupt. Else, we do it right now.
+ *
+ * The UART port lock must be held and local interrupts disabled.
+ */
+static void pmz_maybe_update_regs(struct uart_pmac_port *uap)
+{
+ if (!ZS_REGS_HELD(uap)) {
+ if (ZS_TX_ACTIVE(uap)) {
+ uap->flags |= PMACZILOG_FLAG_REGS_HELD;
+ } else {
+ pmz_debug("pmz: maybe_update_regs: updating\n");
+ pmz_load_zsregs(uap, uap->curregs);
+ }
+ }
+}
+
+static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap,
+ struct pt_regs *regs)
+{
+ struct tty_struct *tty = NULL;
+ unsigned char ch, r1, drop, error;
+ int loops = 0;
+
+ retry:
+ /* The interrupt can be enabled when the port isn't open, typically
+ * that happens when using one port is open and the other closed (stale
+ * interrupt) or when one port is used as a console.
+ */
+ if (!ZS_IS_OPEN(uap)) {
+ pmz_debug("pmz: draining input\n");
+ /* Port is closed, drain input data */
+ for (;;) {
+ if ((++loops) > 1000)
+ goto flood;
+ (void)read_zsreg(uap, R1);
+ write_zsreg(uap, R0, ERR_RES);
+ (void)read_zsdata(uap);
+ ch = read_zsreg(uap, R0);
+ if (!(ch & Rx_CH_AV))
+ break;
+ }
+ return NULL;
+ }
+
+ /* Sanity check, make sure the old bug is no longer happening */
+ if (uap->port.info == NULL || uap->port.info->tty == NULL) {
+ WARN_ON(1);
+ (void)read_zsdata(uap);
+ return NULL;
+ }
+ tty = uap->port.info->tty;
+
+ while (1) {
+ error = 0;
+ drop = 0;
+
+ if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
+ /* Have to drop the lock here */
+ pmz_debug("pmz: flip overflow\n");
+ spin_unlock(&uap->port.lock);
+ tty->flip.work.func((void *)tty);
+ spin_lock(&uap->port.lock);
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+ drop = 1;
+ if (ZS_IS_ASLEEP(uap))
+ return NULL;
+ if (!ZS_IS_OPEN(uap))
+ goto retry;
+ }
+
+ r1 = read_zsreg(uap, R1);
+ ch = read_zsdata(uap);
+
+ if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) {
+ write_zsreg(uap, R0, ERR_RES);
+ zssync(uap);
+ }
+
+ ch &= uap->parity_mask;
+ if (ch == 0 && uap->flags & PMACZILOG_FLAG_BREAK) {
+ uap->flags &= ~PMACZILOG_FLAG_BREAK;
+ }
+
+#if defined(CONFIG_MAGIC_SYSRQ) && defined(CONFIG_SERIAL_CORE_CONSOLE)
+#ifdef USE_CTRL_O_SYSRQ
+ /* Handle the SysRq ^O Hack */
+ if (ch == '\x0f') {
+ uap->port.sysrq = jiffies + HZ*5;
+ goto next_char;
+ }
+#endif /* USE_CTRL_O_SYSRQ */
+ if (uap->port.sysrq) {
+ int swallow;
+ spin_unlock(&uap->port.lock);
+ swallow = uart_handle_sysrq_char(&uap->port, ch, regs);
+ spin_lock(&uap->port.lock);
+ if (swallow)
+ goto next_char;
+ }
+#endif /* CONFIG_MAGIC_SYSRQ && CONFIG_SERIAL_CORE_CONSOLE */
+
+ /* A real serial line, record the character and status. */
+ if (drop)
+ goto next_char;
+
+ *tty->flip.char_buf_ptr = ch;
+ *tty->flip.flag_buf_ptr = TTY_NORMAL;
+ uap->port.icount.rx++;
+
+ if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR | BRK_ABRT)) {
+ error = 1;
+ if (r1 & BRK_ABRT) {
+ pmz_debug("pmz: got break !\n");
+ r1 &= ~(PAR_ERR | CRC_ERR);
+ uap->port.icount.brk++;
+ if (uart_handle_break(&uap->port))
+ goto next_char;
+ }
+ else if (r1 & PAR_ERR)
+ uap->port.icount.parity++;
+ else if (r1 & CRC_ERR)
+ uap->port.icount.frame++;
+ if (r1 & Rx_OVR)
+ uap->port.icount.overrun++;
+ r1 &= uap->port.read_status_mask;
+ if (r1 & BRK_ABRT)
+ *tty->flip.flag_buf_ptr = TTY_BREAK;
+ else if (r1 & PAR_ERR)
+ *tty->flip.flag_buf_ptr = TTY_PARITY;
+ else if (r1 & CRC_ERR)
+ *tty->flip.flag_buf_ptr = TTY_FRAME;
+ }
+
+ if (uap->port.ignore_status_mask == 0xff ||
+ (r1 & uap->port.ignore_status_mask) == 0) {
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ tty->flip.count++;
+ }
+ if ((r1 & Rx_OVR) &&
+ tty->flip.count < TTY_FLIPBUF_SIZE) {
+ *tty->flip.flag_buf_ptr = TTY_OVERRUN;
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ tty->flip.count++;
+ }
+ next_char:
+ /* We can get stuck in an infinite loop getting char 0 when the
+ * line is in a wrong HW state, we break that here.
+ * When that happens, I disable the receive side of the driver.
+ * Note that what I've been experiencing is a real irq loop where
+ * I'm getting flooded regardless of the actual port speed.
+ * Something stange is going on with the HW
+ */
+ if ((++loops) > 1000)
+ goto flood;
+ ch = read_zsreg(uap, R0);
+ if (!(ch & Rx_CH_AV))
+ break;
+ }
+
+ return tty;
+ flood:
+ uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
+ write_zsreg(uap, R1, uap->curregs[R1]);
+ zssync(uap);
+ dev_err(&uap->dev->ofdev.dev, "pmz: rx irq flood !\n");
+ return tty;
+}
+
+static void pmz_status_handle(struct uart_pmac_port *uap, struct pt_regs *regs)
+{
+ unsigned char status;
+
+ status = read_zsreg(uap, R0);
+ write_zsreg(uap, R0, RES_EXT_INT);
+ zssync(uap);
+
+ if (ZS_IS_OPEN(uap) && ZS_WANTS_MODEM_STATUS(uap)) {
+ if (status & SYNC_HUNT)
+ uap->port.icount.dsr++;
+
+ /* The Zilog just gives us an interrupt when DCD/CTS/etc. change.
+ * But it does not tell us which bit has changed, we have to keep
+ * track of this ourselves.
+ * The CTS input is inverted for some reason. -- paulus
+ */
+ if ((status ^ uap->prev_status) & DCD)
+ uart_handle_dcd_change(&uap->port,
+ (status & DCD));
+ if ((status ^ uap->prev_status) & CTS)
+ uart_handle_cts_change(&uap->port,
+ !(status & CTS));
+
+ wake_up_interruptible(&uap->port.info->delta_msr_wait);
+ }
+
+ if (status & BRK_ABRT)
+ uap->flags |= PMACZILOG_FLAG_BREAK;
+
+ uap->prev_status = status;
+}
+
+static void pmz_transmit_chars(struct uart_pmac_port *uap)
+{
+ struct circ_buf *xmit;
+
+ if (ZS_IS_ASLEEP(uap))
+ return;
+ if (ZS_IS_CONS(uap)) {
+ unsigned char status = read_zsreg(uap, R0);
+
+ /* TX still busy? Just wait for the next TX done interrupt.
+ *
+ * It can occur because of how we do serial console writes. It would
+ * be nice to transmit console writes just like we normally would for
+ * a TTY line. (ie. buffered and TX interrupt driven). That is not
+ * easy because console writes cannot sleep. One solution might be
+ * to poll on enough port->xmit space becomming free. -DaveM
+ */
+ if (!(status & Tx_BUF_EMP))
+ return;
+ }
+
+ uap->flags &= ~PMACZILOG_FLAG_TX_ACTIVE;
+
+ if (ZS_REGS_HELD(uap)) {
+ pmz_load_zsregs(uap, uap->curregs);
+ uap->flags &= ~PMACZILOG_FLAG_REGS_HELD;
+ }
+
+ if (ZS_TX_STOPPED(uap)) {
+ uap->flags &= ~PMACZILOG_FLAG_TX_STOPPED;
+ goto ack_tx_int;
+ }
+
+ if (uap->port.x_char) {
+ uap->flags |= PMACZILOG_FLAG_TX_ACTIVE;
+ write_zsdata(uap, uap->port.x_char);
+ zssync(uap);
+ uap->port.icount.tx++;
+ uap->port.x_char = 0;
+ return;
+ }
+
+ if (uap->port.info == NULL)
+ goto ack_tx_int;
+ xmit = &uap->port.info->xmit;
+ if (uart_circ_empty(xmit)) {
+ uart_write_wakeup(&uap->port);
+ goto ack_tx_int;
+ }
+ if (uart_tx_stopped(&uap->port))
+ goto ack_tx_int;
+
+ uap->flags |= PMACZILOG_FLAG_TX_ACTIVE;
+ write_zsdata(uap, xmit->buf[xmit->tail]);
+ zssync(uap);
+
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ uap->port.icount.tx++;
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&uap->port);
+
+ return;
+
+ack_tx_int:
+ write_zsreg(uap, R0, RES_Tx_P);
+ zssync(uap);
+}
+
+/* Hrm... we register that twice, fixme later.... */
+static irqreturn_t pmz_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct uart_pmac_port *uap = dev_id;
+ struct uart_pmac_port *uap_a;
+ struct uart_pmac_port *uap_b;
+ int rc = IRQ_NONE;
+ struct tty_struct *tty;
+ u8 r3;
+
+ uap_a = pmz_get_port_A(uap);
+ uap_b = uap_a->mate;
+
+ spin_lock(&uap_a->port.lock);
+ r3 = read_zsreg(uap_a, R3);
+
+#ifdef DEBUG_HARD
+ pmz_debug("irq, r3: %x\n", r3);
+#endif
+ /* Channel A */
+ tty = NULL;
+ if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
+ write_zsreg(uap_a, R0, RES_H_IUS);
+ zssync(uap_a);
+ if (r3 & CHAEXT)
+ pmz_status_handle(uap_a, regs);
+ if (r3 & CHARxIP)
+ tty = pmz_receive_chars(uap_a, regs);
+ if (r3 & CHATxIP)
+ pmz_transmit_chars(uap_a);
+ rc = IRQ_HANDLED;
+ }
+ spin_unlock(&uap_a->port.lock);
+ if (tty != NULL)
+ tty_flip_buffer_push(tty);
+
+ if (uap_b->node == NULL)
+ goto out;
+
+ spin_lock(&uap_b->port.lock);
+ tty = NULL;
+ if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
+ write_zsreg(uap_b, R0, RES_H_IUS);
+ zssync(uap_b);
+ if (r3 & CHBEXT)
+ pmz_status_handle(uap_b, regs);
+ if (r3 & CHBRxIP)
+ tty = pmz_receive_chars(uap_b, regs);
+ if (r3 & CHBTxIP)
+ pmz_transmit_chars(uap_b);
+ rc = IRQ_HANDLED;
+ }
+ spin_unlock(&uap_b->port.lock);
+ if (tty != NULL)
+ tty_flip_buffer_push(tty);
+
+ out:
+#ifdef DEBUG_HARD
+ pmz_debug("irq done.\n");
+#endif
+ return rc;
+}
+
+/*
+ * Peek the status register, lock not held by caller
+ */
+static inline u8 pmz_peek_status(struct uart_pmac_port *uap)
+{
+ unsigned long flags;
+ u8 status;
+
+ spin_lock_irqsave(&uap->port.lock, flags);
+ status = read_zsreg(uap, R0);
+ spin_unlock_irqrestore(&uap->port.lock, flags);
+
+ return status;
+}
+
+/*
+ * Check if transmitter is empty
+ * The port lock is not held.
+ */
+static unsigned int pmz_tx_empty(struct uart_port *port)
+{
+ struct uart_pmac_port *uap = to_pmz(port);
+ unsigned char status;
+
+ if (ZS_IS_ASLEEP(uap) || uap->node == NULL)
+ return TIOCSER_TEMT;
+
+ status = pmz_peek_status(to_pmz(port));
+ if (status & Tx_BUF_EMP)
+ return TIOCSER_TEMT;
+ return 0;
+}
+
+/*
+ * Set Modem Control (RTS & DTR) bits
+ * The port lock is held and interrupts are disabled.
+ * Note: Shall we really filter out RTS on external ports or
+ * should that be dealt at higher level only ?
+ */
+static void pmz_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct uart_pmac_port *uap = to_pmz(port);
+ unsigned char set_bits, clear_bits;
+
+ /* Do nothing for irda for now... */
+ if (ZS_IS_IRDA(uap))
+ return;
+ /* We get called during boot with a port not up yet */
+ if (ZS_IS_ASLEEP(uap) ||
+ !(ZS_IS_OPEN(uap) || ZS_IS_CONS(uap)))
+ return;
+
+ set_bits = clear_bits = 0;
+
+ if (ZS_IS_INTMODEM(uap)) {
+ if (mctrl & TIOCM_RTS)
+ set_bits |= RTS;
+ else
+ clear_bits |= RTS;
+ }
+ if (mctrl & TIOCM_DTR)
+ set_bits |= DTR;
+ else
+ clear_bits |= DTR;
+
+ /* NOTE: Not subject to 'transmitter active' rule. */
+ uap->curregs[R5] |= set_bits;
+ uap->curregs[R5] &= ~clear_bits;
+ if (ZS_IS_ASLEEP(uap))
+ return;
+ write_zsreg(uap, R5, uap->curregs[R5]);
+ pmz_debug("pmz_set_mctrl: set bits: %x, clear bits: %x -> %x\n",
+ set_bits, clear_bits, uap->curregs[R5]);
+ zssync(uap);
+}
+
+/*
+ * Get Modem Control bits (only the input ones, the core will
+ * or that with a cached value of the control ones)
+ * The port lock is not held.
+ */
+static unsigned int pmz_get_mctrl(struct uart_port *port)
+{
+ struct uart_pmac_port *uap = to_pmz(port);
+ unsigned char status;
+ unsigned int ret;
+
+ if (ZS_IS_ASLEEP(uap) || uap->node == NULL)
+ return 0;
+
+ status = pmz_peek_status(to_pmz(port));
+
+ ret = 0;
+ if (status & DCD)
+ ret |= TIOCM_CAR;
+ if (status & SYNC_HUNT)
+ ret |= TIOCM_DSR;
+ if (!(status & CTS))
+ ret |= TIOCM_CTS;
+
+ return ret;
+}
+
+/*
+ * Stop TX side. Dealt like sunzilog at next Tx interrupt,
+ * though for DMA, we will have to do a bit more. What is
+ * the meaning of the tty_stop bit ? XXX
+ * The port lock is held and interrupts are disabled.
+ */
+static void pmz_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ to_pmz(port)->flags |= PMACZILOG_FLAG_TX_STOPPED;
+}
+
+/*
+ * Kick the Tx side.
+ * The port lock is held and interrupts are disabled.
+ */
+static void pmz_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+ struct uart_pmac_port *uap = to_pmz(port);
+ unsigned char status;
+
+ pmz_debug("pmz: start_tx()\n");
+
+ uap->flags |= PMACZILOG_FLAG_TX_ACTIVE;
+ uap->flags &= ~PMACZILOG_FLAG_TX_STOPPED;
+
+ if (ZS_IS_ASLEEP(uap) || uap->node == NULL)
+ return;
+
+ status = read_zsreg(uap, R0);
+
+ /* TX busy? Just wait for the TX done interrupt. */
+ if (!(status & Tx_BUF_EMP))
+ return;
+
+ /* Send the first character to jump-start the TX done
+ * IRQ sending engine.
+ */
+ if (port->x_char) {
+ write_zsdata(uap, port->x_char);
+ zssync(uap);
+ port->icount.tx++;
+ port->x_char = 0;
+ } else {
+ struct circ_buf *xmit = &port->info->xmit;
+
+ write_zsdata(uap, xmit->buf[xmit->tail]);
+ zssync(uap);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&uap->port);
+ }
+ pmz_debug("pmz: start_tx() done.\n");
+}
+
+/*
+ * Stop Rx side, basically disable emitting of
+ * Rx interrupts on the port. We don't disable the rx
+ * side of the chip proper though
+ * The port lock is held.
+ */
+static void pmz_stop_rx(struct uart_port *port)
+{
+ struct uart_pmac_port *uap = to_pmz(port);
+
+ if (ZS_IS_ASLEEP(uap) || uap->node == NULL)
+ return;
+
+ pmz_debug("pmz: stop_rx()()\n");
+
+ /* Disable all RX interrupts. */
+ uap->curregs[R1] &= ~RxINT_MASK;
+ pmz_maybe_update_regs(uap);
+
+ pmz_debug("pmz: stop_rx() done.\n");
+}
+
+/*
+ * Enable modem status change interrupts
+ * The port lock is held.
+ */
+static void pmz_enable_ms(struct uart_port *port)
+{
+ struct uart_pmac_port *uap = to_pmz(port);
+ unsigned char new_reg;
+
+ if (ZS_IS_IRDA(uap) || uap->node == NULL)
+ return;
+ new_reg = uap->curregs[R15] | (DCDIE | SYNCIE | CTSIE);
+ if (new_reg != uap->curregs[R15]) {
+ uap->curregs[R15] = new_reg;
+
+ if (ZS_IS_ASLEEP(uap))
+ return;
+ /* NOTE: Not subject to 'transmitter active' rule. */
+ write_zsreg(uap, R15, uap->curregs[R15]);
+ }
+}
+
+/*
+ * Control break state emission
+ * The port lock is not held.
+ */
+static void pmz_break_ctl(struct uart_port *port, int break_state)
+{
+ struct uart_pmac_port *uap = to_pmz(port);
+ unsigned char set_bits, clear_bits, new_reg;
+ unsigned long flags;
+
+ if (uap->node == NULL)
+ return;
+ set_bits = clear_bits = 0;
+
+ if (break_state)
+ set_bits |= SND_BRK;
+ else
+ clear_bits |= SND_BRK;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ new_reg = (uap->curregs[R5] | set_bits) & ~clear_bits;
+ if (new_reg != uap->curregs[R5]) {
+ uap->curregs[R5] = new_reg;
+
+ /* NOTE: Not subject to 'transmitter active' rule. */
+ if (ZS_IS_ASLEEP(uap))
+ return;
+ write_zsreg(uap, R5, uap->curregs[R5]);
+ }
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/*
+ * Turn power on or off to the SCC and associated stuff
+ * (port drivers, modem, IR port, etc.)
+ * Returns the number of milliseconds we should wait before
+ * trying to use the port.
+ */
+static int pmz_set_scc_power(struct uart_pmac_port *uap, int state)
+{
+ int delay = 0;
+ int rc;
+
+ if (state) {
+ rc = pmac_call_feature(
+ PMAC_FTR_SCC_ENABLE, uap->node, uap->port_type, 1);
+ pmz_debug("port power on result: %d\n", rc);
+ if (ZS_IS_INTMODEM(uap)) {
+ rc = pmac_call_feature(
+ PMAC_FTR_MODEM_ENABLE, uap->node, 0, 1);
+ delay = 2500; /* wait for 2.5s before using */
+ pmz_debug("modem power result: %d\n", rc);
+ }
+ } else {
+ /* TODO: Make that depend on a timer, don't power down
+ * immediately
+ */
+ if (ZS_IS_INTMODEM(uap)) {
+ rc = pmac_call_feature(
+ PMAC_FTR_MODEM_ENABLE, uap->node, 0, 0);
+ pmz_debug("port power off result: %d\n", rc);
+ }
+ pmac_call_feature(PMAC_FTR_SCC_ENABLE, uap->node, uap->port_type, 0);
+ }
+ return delay;
+}
+
+/*
+ * FixZeroBug....Works around a bug in the SCC receving channel.
+ * Inspired from Darwin code, 15 Sept. 2000 -DanM
+ *
+ * The following sequence prevents a problem that is seen with O'Hare ASICs
+ * (most versions -- also with some Heathrow and Hydra ASICs) where a zero
+ * at the input to the receiver becomes 'stuck' and locks up the receiver.
+ * This problem can occur as a result of a zero bit at the receiver input
+ * coincident with any of the following events:
+ *
+ * The SCC is initialized (hardware or software).
+ * A framing error is detected.
+ * The clocking option changes from synchronous or X1 asynchronous
+ * clocking to X16, X32, or X64 asynchronous clocking.
+ * The decoding mode is changed among NRZ, NRZI, FM0, or FM1.
+ *
+ * This workaround attempts to recover from the lockup condition by placing
+ * the SCC in synchronous loopback mode with a fast clock before programming
+ * any of the asynchronous modes.
+ */
+static void pmz_fix_zero_bug_scc(struct uart_pmac_port *uap)
+{
+ write_zsreg(uap, 9, ZS_IS_CHANNEL_A(uap) ? CHRA : CHRB);
+ zssync(uap);
+ udelay(10);
+ write_zsreg(uap, 9, (ZS_IS_CHANNEL_A(uap) ? CHRA : CHRB) | NV);
+ zssync(uap);
+
+ write_zsreg(uap, 4, X1CLK | MONSYNC);
+ write_zsreg(uap, 3, Rx8);
+ write_zsreg(uap, 5, Tx8 | RTS);
+ write_zsreg(uap, 9, NV); /* Didn't we already do this? */
+ write_zsreg(uap, 11, RCBR | TCBR);
+ write_zsreg(uap, 12, 0);
+ write_zsreg(uap, 13, 0);
+ write_zsreg(uap, 14, (LOOPBAK | BRSRC));
+ write_zsreg(uap, 14, (LOOPBAK | BRSRC | BRENAB));
+ write_zsreg(uap, 3, Rx8 | RxENABLE);
+ write_zsreg(uap, 0, RES_EXT_INT);
+ write_zsreg(uap, 0, RES_EXT_INT);
+ write_zsreg(uap, 0, RES_EXT_INT); /* to kill some time */
+
+ /* The channel should be OK now, but it is probably receiving
+ * loopback garbage.
+ * Switch to asynchronous mode, disable the receiver,
+ * and discard everything in the receive buffer.
+ */
+ write_zsreg(uap, 9, NV);
+ write_zsreg(uap, 4, X16CLK | SB_MASK);
+ write_zsreg(uap, 3, Rx8);
+
+ while (read_zsreg(uap, 0) & Rx_CH_AV) {
+ (void)read_zsreg(uap, 8);
+ write_zsreg(uap, 0, RES_EXT_INT);
+ write_zsreg(uap, 0, ERR_RES);
+ }
+}
+
+/*
+ * Real startup routine, powers up the hardware and sets up
+ * the SCC. Returns a delay in ms where you need to wait before
+ * actually using the port, this is typically the internal modem
+ * powerup delay. This routine expect the lock to be taken.
+ */
+static int __pmz_startup(struct uart_pmac_port *uap)
+{
+ int pwr_delay = 0;
+
+ memset(&uap->curregs, 0, sizeof(uap->curregs));
+
+ /* Power up the SCC & underlying hardware (modem/irda) */
+ pwr_delay = pmz_set_scc_power(uap, 1);
+
+ /* Nice buggy HW ... */
+ pmz_fix_zero_bug_scc(uap);
+
+ /* Reset the channel */
+ uap->curregs[R9] = 0;
+ write_zsreg(uap, 9, ZS_IS_CHANNEL_A(uap) ? CHRA : CHRB);
+ zssync(uap);
+ udelay(10);
+ write_zsreg(uap, 9, 0);
+ zssync(uap);
+
+ /* Clear the interrupt registers */
+ write_zsreg(uap, R1, 0);
+ write_zsreg(uap, R0, ERR_RES);
+ write_zsreg(uap, R0, ERR_RES);
+ write_zsreg(uap, R0, RES_H_IUS);
+ write_zsreg(uap, R0, RES_H_IUS);
+
+ /* Setup some valid baud rate */
+ uap->curregs[R4] = X16CLK | SB1;
+ uap->curregs[R3] = Rx8;
+ uap->curregs[R5] = Tx8 | RTS;
+ if (!ZS_IS_IRDA(uap))
+ uap->curregs[R5] |= DTR;
+ uap->curregs[R12] = 0;
+ uap->curregs[R13] = 0;
+ uap->curregs[R14] = BRENAB;
+
+ /* Clear handshaking, enable BREAK interrupts */
+ uap->curregs[R15] = BRKIE;
+
+ /* Master interrupt enable */
+ uap->curregs[R9] |= NV | MIE;
+
+ pmz_load_zsregs(uap, uap->curregs);
+
+ /* Enable receiver and transmitter. */
+ write_zsreg(uap, R3, uap->curregs[R3] |= RxENABLE);
+ write_zsreg(uap, R5, uap->curregs[R5] |= TxENABLE);
+
+ /* Remember status for DCD/CTS changes */
+ uap->prev_status = read_zsreg(uap, R0);
+
+
+ return pwr_delay;
+}
+
+static void pmz_irda_reset(struct uart_pmac_port *uap)
+{
+ uap->curregs[R5] |= DTR;
+ write_zsreg(uap, R5, uap->curregs[R5]);
+ zssync(uap);
+ mdelay(110);
+ uap->curregs[R5] &= ~DTR;
+ write_zsreg(uap, R5, uap->curregs[R5]);
+ zssync(uap);
+ mdelay(10);
+}
+
+/*
+ * This is the "normal" startup routine, using the above one
+ * wrapped with the lock and doing a schedule delay
+ */
+static int pmz_startup(struct uart_port *port)
+{
+ struct uart_pmac_port *uap = to_pmz(port);
+ unsigned long flags;
+ int pwr_delay = 0;
+
+ pmz_debug("pmz: startup()\n");
+
+ if (ZS_IS_ASLEEP(uap))
+ return -EAGAIN;
+ if (uap->node == NULL)
+ return -ENODEV;
+
+ down(&pmz_irq_sem);
+
+ uap->flags |= PMACZILOG_FLAG_IS_OPEN;
+
+ /* A console is never powered down. Else, power up and
+ * initialize the chip
+ */
+ if (!ZS_IS_CONS(uap)) {
+ spin_lock_irqsave(&port->lock, flags);
+ pwr_delay = __pmz_startup(uap);
+ spin_unlock_irqrestore(&port->lock, flags);
+ }
+
+ pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON;
+ if (request_irq(uap->port.irq, pmz_interrupt, SA_SHIRQ, "PowerMac Zilog", uap)) {
+ dev_err(&uap->dev->ofdev.dev,
+ "Unable to register zs interrupt handler.\n");
+ pmz_set_scc_power(uap, 0);
+ up(&pmz_irq_sem);
+ return -ENXIO;
+ }
+
+ up(&pmz_irq_sem);
+
+ /* Right now, we deal with delay by blocking here, I'll be
+ * smarter later on
+ */
+ if (pwr_delay != 0) {
+ pmz_debug("pmz: delaying %d ms\n", pwr_delay);
+ msleep(pwr_delay);
+ }
+
+ /* IrDA reset is done now */
+ if (ZS_IS_IRDA(uap))
+ pmz_irda_reset(uap);
+
+ /* Enable interrupts emission from the chip */
+ spin_lock_irqsave(&port->lock, flags);
+ uap->curregs[R1] |= INT_ALL_Rx | TxINT_ENAB;
+ if (!ZS_IS_EXTCLK(uap))
+ uap->curregs[R1] |= EXT_INT_ENAB;
+ write_zsreg(uap, R1, uap->curregs[R1]);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ pmz_debug("pmz: startup() done.\n");
+
+ return 0;
+}
+
+static void pmz_shutdown(struct uart_port *port)
+{
+ struct uart_pmac_port *uap = to_pmz(port);
+ unsigned long flags;
+
+ pmz_debug("pmz: shutdown()\n");
+
+ if (uap->node == NULL)
+ return;
+
+ down(&pmz_irq_sem);
+
+ /* Release interrupt handler */
+ free_irq(uap->port.irq, uap);
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ uap->flags &= ~PMACZILOG_FLAG_IS_OPEN;
+
+ if (!ZS_IS_OPEN(uap->mate))
+ pmz_get_port_A(uap)->flags &= ~PMACZILOG_FLAG_IS_IRQ_ON;
+
+ /* Disable interrupts */
+ if (!ZS_IS_ASLEEP(uap)) {
+ uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
+ write_zsreg(uap, R1, uap->curregs[R1]);
+ zssync(uap);
+ }
+
+ if (ZS_IS_CONS(uap) || ZS_IS_ASLEEP(uap)) {
+ spin_unlock_irqrestore(&port->lock, flags);
+ up(&pmz_irq_sem);
+ return;
+ }
+
+ /* Disable receiver and transmitter. */
+ uap->curregs[R3] &= ~RxENABLE;
+ uap->curregs[R5] &= ~TxENABLE;
+
+ /* Disable all interrupts and BRK assertion. */
+ uap->curregs[R5] &= ~SND_BRK;
+ pmz_maybe_update_regs(uap);
+
+ /* Shut the chip down */
+ pmz_set_scc_power(uap, 0);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ up(&pmz_irq_sem);
+
+ pmz_debug("pmz: shutdown() done.\n");
+}
+
+/* Shared by TTY driver and serial console setup. The port lock is held
+ * and local interrupts are disabled.
+ */
+static void pmz_convert_to_zs(struct uart_pmac_port *uap, unsigned int cflag,
+ unsigned int iflag, unsigned long baud)
+{
+ int brg;
+
+
+ /* Switch to external clocking for IrDA high clock rates. That
+ * code could be re-used for Midi interfaces with different
+ * multipliers
+ */
+ if (baud >= 115200 && ZS_IS_IRDA(uap)) {
+ uap->curregs[R4] = X1CLK;
+ uap->curregs[R11] = RCTRxCP | TCTRxCP;
+ uap->curregs[R14] = 0; /* BRG off */
+ uap->curregs[R12] = 0;
+ uap->curregs[R13] = 0;
+ uap->flags |= PMACZILOG_FLAG_IS_EXTCLK;
+ } else {
+ switch (baud) {
+ case ZS_CLOCK/16: /* 230400 */
+ uap->curregs[R4] = X16CLK;
+ uap->curregs[R11] = 0;
+ uap->curregs[R14] = 0;
+ break;
+ case ZS_CLOCK/32: /* 115200 */
+ uap->curregs[R4] = X32CLK;
+ uap->curregs[R11] = 0;
+ uap->curregs[R14] = 0;
+ break;
+ default:
+ uap->curregs[R4] = X16CLK;
+ uap->curregs[R11] = TCBR | RCBR;
+ brg = BPS_TO_BRG(baud, ZS_CLOCK / 16);
+ uap->curregs[R12] = (brg & 255);
+ uap->curregs[R13] = ((brg >> 8) & 255);
+ uap->curregs[R14] = BRENAB;
+ }
+ uap->flags &= ~PMACZILOG_FLAG_IS_EXTCLK;
+ }
+
+ /* Character size, stop bits, and parity. */
+ uap->curregs[3] &= ~RxN_MASK;
+ uap->curregs[5] &= ~TxN_MASK;
+
+ switch (cflag & CSIZE) {
+ case CS5:
+ uap->curregs[3] |= Rx5;
+ uap->curregs[5] |= Tx5;
+ uap->parity_mask = 0x1f;
+ break;
+ case CS6:
+ uap->curregs[3] |= Rx6;
+ uap->curregs[5] |= Tx6;
+ uap->parity_mask = 0x3f;
+ break;
+ case CS7:
+ uap->curregs[3] |= Rx7;
+ uap->curregs[5] |= Tx7;
+ uap->parity_mask = 0x7f;
+ break;
+ case CS8:
+ default:
+ uap->curregs[3] |= Rx8;
+ uap->curregs[5] |= Tx8;
+ uap->parity_mask = 0xff;
+ break;
+ };
+ uap->curregs[4] &= ~(SB_MASK);
+ if (cflag & CSTOPB)
+ uap->curregs[4] |= SB2;
+ else
+ uap->curregs[4] |= SB1;
+ if (cflag & PARENB)
+ uap->curregs[4] |= PAR_ENAB;
+ else
+ uap->curregs[4] &= ~PAR_ENAB;
+ if (!(cflag & PARODD))
+ uap->curregs[4] |= PAR_EVEN;
+ else
+ uap->curregs[4] &= ~PAR_EVEN;
+
+ uap->port.read_status_mask = Rx_OVR;
+ if (iflag & INPCK)
+ uap->port.read_status_mask |= CRC_ERR | PAR_ERR;
+ if (iflag & (BRKINT | PARMRK))
+ uap->port.read_status_mask |= BRK_ABRT;
+
+ uap->port.ignore_status_mask = 0;
+ if (iflag & IGNPAR)
+ uap->port.ignore_status_mask |= CRC_ERR | PAR_ERR;
+ if (iflag & IGNBRK) {
+ uap->port.ignore_status_mask |= BRK_ABRT;
+ if (iflag & IGNPAR)
+ uap->port.ignore_status_mask |= Rx_OVR;
+ }
+
+ if ((cflag & CREAD) == 0)
+ uap->port.ignore_status_mask = 0xff;
+}
+
+
+/*
+ * Set the irda codec on the imac to the specified baud rate.
+ */
+static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud)
+{
+ u8 cmdbyte;
+ int t, version;
+
+ switch (*baud) {
+ /* SIR modes */
+ case 2400:
+ cmdbyte = 0x53;
+ break;
+ case 4800:
+ cmdbyte = 0x52;
+ break;
+ case 9600:
+ cmdbyte = 0x51;
+ break;
+ case 19200:
+ cmdbyte = 0x50;
+ break;
+ case 38400:
+ cmdbyte = 0x4f;
+ break;
+ case 57600:
+ cmdbyte = 0x4e;
+ break;
+ case 115200:
+ cmdbyte = 0x4d;
+ break;
+ /* The FIR modes aren't really supported at this point, how
+ * do we select the speed ? via the FCR on KeyLargo ?
+ */
+ case 1152000:
+ cmdbyte = 0;
+ break;
+ case 4000000:
+ cmdbyte = 0;
+ break;
+ default: /* 9600 */
+ cmdbyte = 0x51;
+ *baud = 9600;
+ break;
+ }
+
+ /* Wait for transmitter to drain */
+ t = 10000;
+ while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0
+ || (read_zsreg(uap, R1) & ALL_SNT) == 0) {
+ if (--t <= 0) {
+ dev_err(&uap->dev->ofdev.dev, "transmitter didn't drain\n");
+ return;
+ }
+ udelay(10);
+ }
+
+ /* Drain the receiver too */
+ t = 100;
+ (void)read_zsdata(uap);
+ (void)read_zsdata(uap);
+ (void)read_zsdata(uap);
+ mdelay(10);
+ while (read_zsreg(uap, R0) & Rx_CH_AV) {
+ read_zsdata(uap);
+ mdelay(10);
+ if (--t <= 0) {
+ dev_err(&uap->dev->ofdev.dev, "receiver didn't drain\n");
+ return;
+ }
+ }
+
+ /* Switch to command mode */
+ uap->curregs[R5] |= DTR;
+ write_zsreg(uap, R5, uap->curregs[R5]);
+ zssync(uap);
+ mdelay(1);
+
+ /* Switch SCC to 19200 */
+ pmz_convert_to_zs(uap, CS8, 0, 19200);
+ pmz_load_zsregs(uap, uap->curregs);
+ mdelay(1);
+
+ /* Write get_version command byte */
+ write_zsdata(uap, 1);
+ t = 5000;
+ while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) {
+ if (--t <= 0) {
+ dev_err(&uap->dev->ofdev.dev,
+ "irda_setup timed out on get_version byte\n");
+ goto out;
+ }
+ udelay(10);
+ }
+ version = read_zsdata(uap);
+
+ if (version < 4) {
+ dev_info(&uap->dev->ofdev.dev, "IrDA: dongle version %d not supported\n",
+ version);
+ goto out;
+ }
+
+ /* Send speed mode */
+ write_zsdata(uap, cmdbyte);
+ t = 5000;
+ while ((read_zsreg(uap, R0) & Rx_CH_AV) == 0) {
+ if (--t <= 0) {
+ dev_err(&uap->dev->ofdev.dev,
+ "irda_setup timed out on speed mode byte\n");
+ goto out;
+ }
+ udelay(10);
+ }
+ t = read_zsdata(uap);
+ if (t != cmdbyte)
+ dev_err(&uap->dev->ofdev.dev,
+ "irda_setup speed mode byte = %x (%x)\n", t, cmdbyte);
+
+ dev_info(&uap->dev->ofdev.dev, "IrDA setup for %ld bps, dongle version: %d\n",
+ *baud, version);
+
+ (void)read_zsdata(uap);
+ (void)read_zsdata(uap);
+ (void)read_zsdata(uap);
+
+ out:
+ /* Switch back to data mode */
+ uap->curregs[R5] &= ~DTR;
+ write_zsreg(uap, R5, uap->curregs[R5]);
+ zssync(uap);
+
+ (void)read_zsdata(uap);
+ (void)read_zsdata(uap);
+ (void)read_zsdata(uap);
+}
+
+
+static void __pmz_set_termios(struct uart_port *port, struct termios *termios,
+ struct termios *old)
+{
+ struct uart_pmac_port *uap = to_pmz(port);
+ unsigned long baud;
+
+ pmz_debug("pmz: set_termios()\n");
+
+ if (ZS_IS_ASLEEP(uap))
+ return;
+
+ memcpy(&uap->termios_cache, termios, sizeof(struct termios));
+
+ /* XXX Check which revs of machines actually allow 1 and 4Mb speeds
+ * on the IR dongle. Note that the IRTTY driver currently doesn't know
+ * about the FIR mode and high speed modes. So these are unused. For
+ * implementing proper support for these, we should probably add some
+ * DMA as well, at least on the Rx side, which isn't a simple thing
+ * at this point.
+ */
+ if (ZS_IS_IRDA(uap)) {
+ /* Calc baud rate */
+ baud = uart_get_baud_rate(port, termios, old, 1200, 4000000);
+ pmz_debug("pmz: switch IRDA to %ld bauds\n", baud);
+ /* Cet the irda codec to the right rate */
+ pmz_irda_setup(uap, &baud);
+ /* Set final baud rate */
+ pmz_convert_to_zs(uap, termios->c_cflag, termios->c_iflag, baud);
+ pmz_load_zsregs(uap, uap->curregs);
+ zssync(uap);
+ } else {
+ baud = uart_get_baud_rate(port, termios, old, 1200, 230400);
+ pmz_convert_to_zs(uap, termios->c_cflag, termios->c_iflag, baud);
+ /* Make sure modem status interrupts are correctly configured */
+ if (UART_ENABLE_MS(&uap->port, termios->c_cflag)) {
+ uap->curregs[R15] |= DCDIE | SYNCIE | CTSIE;
+ uap->flags |= PMACZILOG_FLAG_MODEM_STATUS;
+ } else {
+ uap->curregs[R15] &= ~(DCDIE | SYNCIE | CTSIE);
+ uap->flags &= ~PMACZILOG_FLAG_MODEM_STATUS;
+ }
+
+ /* Load registers to the chip */
+ pmz_maybe_update_regs(uap);
+ }
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ pmz_debug("pmz: set_termios() done.\n");
+}
+
+/* The port lock is not held. */
+static void pmz_set_termios(struct uart_port *port, struct termios *termios,
+ struct termios *old)
+{
+ struct uart_pmac_port *uap = to_pmz(port);
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* Disable IRQs on the port */
+ uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
+ write_zsreg(uap, R1, uap->curregs[R1]);
+
+ /* Setup new port configuration */
+ __pmz_set_termios(port, termios, old);
+
+ /* Re-enable IRQs on the port */
+ if (ZS_IS_OPEN(uap)) {
+ uap->curregs[R1] |= INT_ALL_Rx | TxINT_ENAB;
+ if (!ZS_IS_EXTCLK(uap))
+ uap->curregs[R1] |= EXT_INT_ENAB;
+ write_zsreg(uap, R1, uap->curregs[R1]);
+ }
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *pmz_type(struct uart_port *port)
+{
+ struct uart_pmac_port *uap = to_pmz(port);
+
+ if (ZS_IS_IRDA(uap))
+ return "Z85c30 ESCC - Infrared port";
+ else if (ZS_IS_INTMODEM(uap))
+ return "Z85c30 ESCC - Internal modem";
+ return "Z85c30 ESCC - Serial port";
+}
+
+/* We do not request/release mappings of the registers here, this
+ * happens at early serial probe time.
+ */
+static void pmz_release_port(struct uart_port *port)
+{
+}
+
+static int pmz_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+/* These do not need to do anything interesting either. */
+static void pmz_config_port(struct uart_port *port, int flags)
+{
+}
+
+/* We do not support letting the user mess with the divisor, IRQ, etc. */
+static int pmz_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ return -EINVAL;
+}
+
+static struct uart_ops pmz_pops = {
+ .tx_empty = pmz_tx_empty,
+ .set_mctrl = pmz_set_mctrl,
+ .get_mctrl = pmz_get_mctrl,
+ .stop_tx = pmz_stop_tx,
+ .start_tx = pmz_start_tx,
+ .stop_rx = pmz_stop_rx,
+ .enable_ms = pmz_enable_ms,
+ .break_ctl = pmz_break_ctl,
+ .startup = pmz_startup,
+ .shutdown = pmz_shutdown,
+ .set_termios = pmz_set_termios,
+ .type = pmz_type,
+ .release_port = pmz_release_port,
+ .request_port = pmz_request_port,
+ .config_port = pmz_config_port,
+ .verify_port = pmz_verify_port,
+};
+
+/*
+ * Setup one port structure after probing, HW is down at this point,
+ * Unlike sunzilog, we don't need to pre-init the spinlock as we don't
+ * register our console before uart_add_one_port() is called
+ */
+static int __init pmz_init_port(struct uart_pmac_port *uap)
+{
+ struct device_node *np = uap->node;
+ char *conn;
+ struct slot_names_prop {
+ int count;
+ char name[1];
+ } *slots;
+ int len;
+
+ /*
+ * Request & map chip registers
+ */
+ uap->port.mapbase = np->addrs[0].address;
+ uap->port.membase = ioremap(uap->port.mapbase, 0x1000);
+
+ uap->control_reg = uap->port.membase;
+ uap->data_reg = uap->control_reg + 0x10;
+
+ /*
+ * Request & map DBDMA registers
+ */
+#ifdef HAS_DBDMA
+ if (np->n_addrs >= 3 && np->n_intrs >= 3)
+ uap->flags |= PMACZILOG_FLAG_HAS_DMA;
+#endif
+ if (ZS_HAS_DMA(uap)) {
+ uap->tx_dma_regs = ioremap(np->addrs[np->n_addrs - 2].address, 0x1000);
+ if (uap->tx_dma_regs == NULL) {
+ uap->flags &= ~PMACZILOG_FLAG_HAS_DMA;
+ goto no_dma;
+ }
+ uap->rx_dma_regs = ioremap(np->addrs[np->n_addrs - 1].address, 0x1000);
+ if (uap->rx_dma_regs == NULL) {
+ iounmap(uap->tx_dma_regs);
+ uap->tx_dma_regs = NULL;
+ uap->flags &= ~PMACZILOG_FLAG_HAS_DMA;
+ goto no_dma;
+ }
+ uap->tx_dma_irq = np->intrs[1].line;
+ uap->rx_dma_irq = np->intrs[2].line;
+ }
+no_dma:
+
+ /*
+ * Detect port type
+ */
+ if (device_is_compatible(np, "cobalt"))
+ uap->flags |= PMACZILOG_FLAG_IS_INTMODEM;
+ conn = get_property(np, "AAPL,connector", &len);
+ if (conn && (strcmp(conn, "infrared") == 0))
+ uap->flags |= PMACZILOG_FLAG_IS_IRDA;
+ uap->port_type = PMAC_SCC_ASYNC;
+ /* 1999 Powerbook G3 has slot-names property instead */
+ slots = (struct slot_names_prop *)get_property(np, "slot-names", &len);
+ if (slots && slots->count > 0) {
+ if (strcmp(slots->name, "IrDA") == 0)
+ uap->flags |= PMACZILOG_FLAG_IS_IRDA;
+ else if (strcmp(slots->name, "Modem") == 0)
+ uap->flags |= PMACZILOG_FLAG_IS_INTMODEM;
+ }
+ if (ZS_IS_IRDA(uap))
+ uap->port_type = PMAC_SCC_IRDA;
+ if (ZS_IS_INTMODEM(uap)) {
+ struct device_node* i2c_modem = find_devices("i2c-modem");
+ if (i2c_modem) {
+ char* mid = get_property(i2c_modem, "modem-id", NULL);
+ if (mid) switch(*mid) {
+ case 0x04 :
+ case 0x05 :
+ case 0x07 :
+ case 0x08 :
+ case 0x0b :
+ case 0x0c :
+ uap->port_type = PMAC_SCC_I2S1;
+ }
+ printk(KERN_INFO "pmac_zilog: i2c-modem detected, id: %d\n",
+ mid ? (*mid) : 0);
+ } else {
+ printk(KERN_INFO "pmac_zilog: serial modem detected\n");
+ }
+ }
+
+ /*
+ * Init remaining bits of "port" structure
+ */
+ uap->port.iotype = SERIAL_IO_MEM;
+ uap->port.irq = np->intrs[0].line;
+ uap->port.uartclk = ZS_CLOCK;
+ uap->port.fifosize = 1;
+ uap->port.ops = &pmz_pops;
+ uap->port.type = PORT_PMAC_ZILOG;
+ uap->port.flags = 0;
+
+ /* Setup some valid baud rate information in the register
+ * shadows so we don't write crap there before baud rate is
+ * first initialized.
+ */
+ pmz_convert_to_zs(uap, CS8, 0, 9600);
+
+ return 0;
+}
+
+/*
+ * Get rid of a port on module removal
+ */
+static void pmz_dispose_port(struct uart_pmac_port *uap)
+{
+ struct device_node *np;
+
+ np = uap->node;
+ iounmap(uap->rx_dma_regs);
+ iounmap(uap->tx_dma_regs);
+ iounmap(uap->control_reg);
+ uap->node = NULL;
+ of_node_put(np);
+ memset(uap, 0, sizeof(struct uart_pmac_port));
+}
+
+/*
+ * Called upon match with an escc node in the devive-tree.
+ */
+static int pmz_attach(struct macio_dev *mdev, const struct of_match *match)
+{
+ int i;
+
+ /* Iterate the pmz_ports array to find a matching entry
+ */
+ for (i = 0; i < MAX_ZS_PORTS; i++)
+ if (pmz_ports[i].node == mdev->ofdev.node) {
+ struct uart_pmac_port *uap = &pmz_ports[i];
+
+ uap->dev = mdev;
+ dev_set_drvdata(&mdev->ofdev.dev, uap);
+ if (macio_request_resources(uap->dev, "pmac_zilog"))
+ printk(KERN_WARNING "%s: Failed to request resource"
+ ", port still active\n",
+ uap->node->name);
+ else
+ uap->flags |= PMACZILOG_FLAG_RSRC_REQUESTED;
+ return 0;
+ }
+ return -ENODEV;
+}
+
+/*
+ * That one should not be called, macio isn't really a hotswap device,
+ * we don't expect one of those serial ports to go away...
+ */
+static int pmz_detach(struct macio_dev *mdev)
+{
+ struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev);
+
+ if (!uap)
+ return -ENODEV;
+
+ if (uap->flags & PMACZILOG_FLAG_RSRC_REQUESTED) {
+ macio_release_resources(uap->dev);
+ uap->flags &= ~PMACZILOG_FLAG_RSRC_REQUESTED;
+ }
+ dev_set_drvdata(&mdev->ofdev.dev, NULL);
+ uap->dev = NULL;
+
+ return 0;
+}
+
+
+static int pmz_suspend(struct macio_dev *mdev, u32 pm_state)
+{
+ struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev);
+ struct uart_state *state;
+ unsigned long flags;
+
+ if (uap == NULL) {
+ printk("HRM... pmz_suspend with NULL uap\n");
+ return 0;
+ }
+
+ if (pm_state == mdev->ofdev.dev.power.power_state || pm_state < 2)
+ return 0;
+
+ pmz_debug("suspend, switching to state %d\n", pm_state);
+
+ state = pmz_uart_reg.state + uap->port.line;
+
+ down(&pmz_irq_sem);
+ down(&state->sem);
+
+ spin_lock_irqsave(&uap->port.lock, flags);
+
+ if (ZS_IS_OPEN(uap) || ZS_IS_CONS(uap)) {
+ /* Disable receiver and transmitter. */
+ uap->curregs[R3] &= ~RxENABLE;
+ uap->curregs[R5] &= ~TxENABLE;
+
+ /* Disable all interrupts and BRK assertion. */
+ uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
+ uap->curregs[R5] &= ~SND_BRK;
+ pmz_load_zsregs(uap, uap->curregs);
+ uap->flags |= PMACZILOG_FLAG_IS_ASLEEP;
+ mb();
+ }
+
+ spin_unlock_irqrestore(&uap->port.lock, flags);
+
+ if (ZS_IS_OPEN(uap) || ZS_IS_OPEN(uap->mate))
+ if (ZS_IS_ASLEEP(uap->mate) && ZS_IS_IRQ_ON(pmz_get_port_A(uap))) {
+ pmz_get_port_A(uap)->flags &= ~PMACZILOG_FLAG_IS_IRQ_ON;
+ disable_irq(uap->port.irq);
+ }
+
+ if (ZS_IS_CONS(uap))
+ uap->port.cons->flags &= ~CON_ENABLED;
+
+ /* Shut the chip down */
+ pmz_set_scc_power(uap, 0);
+
+ up(&state->sem);
+ up(&pmz_irq_sem);
+
+ pmz_debug("suspend, switching complete\n");
+
+ mdev->ofdev.dev.power.power_state = pm_state;
+
+ return 0;
+}
+
+
+static int pmz_resume(struct macio_dev *mdev)
+{
+ struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev);
+ struct uart_state *state;
+ unsigned long flags;
+ int pwr_delay = 0;
+
+ if (uap == NULL)
+ return 0;
+
+ if (mdev->ofdev.dev.power.power_state == 0)
+ return 0;
+
+ pmz_debug("resume, switching to state 0\n");
+
+ state = pmz_uart_reg.state + uap->port.line;
+
+ down(&pmz_irq_sem);
+ down(&state->sem);
+
+ spin_lock_irqsave(&uap->port.lock, flags);
+ if (!ZS_IS_OPEN(uap) && !ZS_IS_CONS(uap)) {
+ spin_unlock_irqrestore(&uap->port.lock, flags);
+ goto bail;
+ }
+ pwr_delay = __pmz_startup(uap);
+
+ /* Take care of config that may have changed while asleep */
+ __pmz_set_termios(&uap->port, &uap->termios_cache, NULL);
+
+ if (ZS_IS_OPEN(uap)) {
+ /* Enable interrupts */
+ uap->curregs[R1] |= INT_ALL_Rx | TxINT_ENAB;
+ if (!ZS_IS_EXTCLK(uap))
+ uap->curregs[R1] |= EXT_INT_ENAB;
+ write_zsreg(uap, R1, uap->curregs[R1]);
+ }
+
+ spin_unlock_irqrestore(&uap->port.lock, flags);
+
+ if (ZS_IS_CONS(uap))
+ uap->port.cons->flags |= CON_ENABLED;
+
+ /* Re-enable IRQ on the controller */
+ if (ZS_IS_OPEN(uap) && !ZS_IS_IRQ_ON(pmz_get_port_A(uap))) {
+ pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON;
+ enable_irq(uap->port.irq);
+ }
+
+ bail:
+ up(&state->sem);
+ up(&pmz_irq_sem);
+
+ /* Right now, we deal with delay by blocking here, I'll be
+ * smarter later on
+ */
+ if (pwr_delay != 0) {
+ pmz_debug("pmz: delaying %d ms\n", pwr_delay);
+ msleep(pwr_delay);
+ }
+
+ pmz_debug("resume, switching complete\n");
+
+ mdev->ofdev.dev.power.power_state = 0;
+
+ return 0;
+}
+
+/*
+ * Probe all ports in the system and build the ports array, we register
+ * with the serial layer at this point, the macio-type probing is only
+ * used later to "attach" to the sysfs tree so we get power management
+ * events
+ */
+static int __init pmz_probe(void)
+{
+ struct device_node *node_p, *node_a, *node_b, *np;
+ int count = 0;
+ int rc;
+
+ /*
+ * Find all escc chips in the system
+ */
+ node_p = of_find_node_by_name(NULL, "escc");
+ while (node_p) {
+ /*
+ * First get channel A/B node pointers
+ *
+ * TODO: Add routines with proper locking to do that...
+ */
+ node_a = node_b = NULL;
+ for (np = NULL; (np = of_get_next_child(node_p, np)) != NULL;) {
+ if (strncmp(np->name, "ch-a", 4) == 0)
+ node_a = of_node_get(np);
+ else if (strncmp(np->name, "ch-b", 4) == 0)
+ node_b = of_node_get(np);
+ }
+ if (!node_a && !node_b) {
+ of_node_put(node_a);
+ of_node_put(node_b);
+ printk(KERN_ERR "pmac_zilog: missing node %c for escc %s\n",
+ (!node_a) ? 'a' : 'b', node_p->full_name);
+ goto next;
+ }
+
+ /*
+ * Fill basic fields in the port structures
+ */
+ pmz_ports[count].mate = &pmz_ports[count+1];
+ pmz_ports[count+1].mate = &pmz_ports[count];
+ pmz_ports[count].flags = PMACZILOG_FLAG_IS_CHANNEL_A;
+ pmz_ports[count].node = node_a;
+ pmz_ports[count+1].node = node_b;
+ pmz_ports[count].port.line = count;
+ pmz_ports[count+1].port.line = count+1;
+
+ /*
+ * Setup the ports for real
+ */
+ rc = pmz_init_port(&pmz_ports[count]);
+ if (rc == 0 && node_b != NULL)
+ rc = pmz_init_port(&pmz_ports[count+1]);
+ if (rc != 0) {
+ of_node_put(node_a);
+ of_node_put(node_b);
+ memset(&pmz_ports[count], 0, sizeof(struct uart_pmac_port));
+ memset(&pmz_ports[count+1], 0, sizeof(struct uart_pmac_port));
+ goto next;
+ }
+ count += 2;
+next:
+ node_p = of_find_node_by_name(node_p, "escc");
+ }
+ pmz_ports_count = count;
+
+ return 0;
+}
+
+#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
+
+static void pmz_console_write(struct console *con, const char *s, unsigned int count);
+static int __init pmz_console_setup(struct console *co, char *options);
+
+static struct console pmz_console = {
+ .name = "ttyS",
+ .write = pmz_console_write,
+ .device = uart_console_device,
+ .setup = pmz_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &pmz_uart_reg,
+};
+
+#define PMACZILOG_CONSOLE &pmz_console
+#else /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
+#define PMACZILOG_CONSOLE (NULL)
+#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
+
+/*
+ * Register the driver, console driver and ports with the serial
+ * core
+ */
+static int __init pmz_register(void)
+{
+ int i, rc;
+
+ pmz_uart_reg.nr = pmz_ports_count;
+ pmz_uart_reg.cons = PMACZILOG_CONSOLE;
+ pmz_uart_reg.minor = 64;
+
+ /*
+ * Register this driver with the serial core
+ */
+ rc = uart_register_driver(&pmz_uart_reg);
+ if (rc)
+ return rc;
+
+ /*
+ * Register each port with the serial core
+ */
+ for (i = 0; i < pmz_ports_count; i++) {
+ struct uart_pmac_port *uport = &pmz_ports[i];
+ /* NULL node may happen on wallstreet */
+ if (uport->node != NULL)
+ rc = uart_add_one_port(&pmz_uart_reg, &uport->port);
+ if (rc)
+ goto err_out;
+ }
+
+ return 0;
+err_out:
+ while (i-- > 0) {
+ struct uart_pmac_port *uport = &pmz_ports[i];
+ uart_remove_one_port(&pmz_uart_reg, &uport->port);
+ }
+ uart_unregister_driver(&pmz_uart_reg);
+ return rc;
+}
+
+static struct of_match pmz_match[] =
+{
+ {
+ .name = "ch-a",
+ .type = OF_ANY_MATCH,
+ .compatible = OF_ANY_MATCH
+ },
+ {
+ .name = "ch-b",
+ .type = OF_ANY_MATCH,
+ .compatible = OF_ANY_MATCH
+ },
+ {},
+};
+
+static struct macio_driver pmz_driver =
+{
+ .name = "pmac_zilog",
+ .match_table = pmz_match,
+ .probe = pmz_attach,
+ .remove = pmz_detach,
+ .suspend = pmz_suspend,
+ .resume = pmz_resume,
+};
+
+static int __init init_pmz(void)
+{
+ int rc, i;
+ printk(KERN_INFO "%s\n", version);
+
+ /*
+ * First, we need to do a direct OF-based probe pass. We
+ * do that because we want serial console up before the
+ * macio stuffs calls us back, and since that makes it
+ * easier to pass the proper number of channels to
+ * uart_register_driver()
+ */
+ if (pmz_ports_count == 0)
+ pmz_probe();
+
+ /*
+ * Bail early if no port found
+ */
+ if (pmz_ports_count == 0)
+ return -ENODEV;
+
+ /*
+ * Now we register with the serial layer
+ */
+ rc = pmz_register();
+ if (rc) {
+ printk(KERN_ERR
+ "pmac_zilog: Error registering serial device, disabling pmac_zilog.\n"
+ "pmac_zilog: Did another serial driver already claim the minors?\n");
+ /* effectively "pmz_unprobe()" */
+ for (i=0; i < pmz_ports_count; i++)
+ pmz_dispose_port(&pmz_ports[i]);
+ return rc;
+ }
+
+ /*
+ * Then we register the macio driver itself
+ */
+ return macio_register_driver(&pmz_driver);
+}
+
+static void __exit exit_pmz(void)
+{
+ int i;
+
+ /* Get rid of macio-driver (detach from macio) */
+ macio_unregister_driver(&pmz_driver);
+
+ for (i = 0; i < pmz_ports_count; i++) {
+ struct uart_pmac_port *uport = &pmz_ports[i];
+ if (uport->node != NULL) {
+ uart_remove_one_port(&pmz_uart_reg, &uport->port);
+ pmz_dispose_port(uport);
+ }
+ }
+ /* Unregister UART driver */
+ uart_unregister_driver(&pmz_uart_reg);
+}
+
+#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
+
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ */
+static void pmz_console_write(struct console *con, const char *s, unsigned int count)
+{
+ struct uart_pmac_port *uap = &pmz_ports[con->index];
+ unsigned long flags;
+ int i;
+
+ if (ZS_IS_ASLEEP(uap))
+ return;
+ spin_lock_irqsave(&uap->port.lock, flags);
+
+ /* Turn of interrupts and enable the transmitter. */
+ write_zsreg(uap, R1, uap->curregs[1] & ~TxINT_ENAB);
+ write_zsreg(uap, R5, uap->curregs[5] | TxENABLE | RTS | DTR);
+
+ for (i = 0; i < count; i++) {
+ /* Wait for the transmit buffer to empty. */
+ while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0)
+ udelay(5);
+ write_zsdata(uap, s[i]);
+ if (s[i] == 10) {
+ while ((read_zsreg(uap, R0) & Tx_BUF_EMP) == 0)
+ udelay(5);
+ write_zsdata(uap, R13);
+ }
+ }
+
+ /* Restore the values in the registers. */
+ write_zsreg(uap, R1, uap->curregs[1]);
+ /* Don't disable the transmitter. */
+
+ spin_unlock_irqrestore(&uap->port.lock, flags);
+}
+
+/*
+ * Setup the serial console
+ */
+static int __init pmz_console_setup(struct console *co, char *options)
+{
+ struct uart_pmac_port *uap;
+ struct uart_port *port;
+ int baud = 38400;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+ unsigned long pwr_delay;
+
+ /*
+ * XServe's default to 57600 bps
+ */
+ if (machine_is_compatible("RackMac1,1")
+ || machine_is_compatible("RackMac1,2")
+ || machine_is_compatible("MacRISC4"))
+ baud = 57600;
+
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ if (co->index >= pmz_ports_count)
+ co->index = 0;
+ uap = &pmz_ports[co->index];
+ if (uap->node == NULL)
+ return -ENODEV;
+ port = &uap->port;
+
+ /*
+ * Mark port as beeing a console
+ */
+ uap->flags |= PMACZILOG_FLAG_IS_CONS;
+
+ /*
+ * Temporary fix for uart layer who didn't setup the spinlock yet
+ */
+ spin_lock_init(&port->lock);
+
+ /*
+ * Enable the hardware
+ */
+ pwr_delay = __pmz_startup(uap);
+ if (pwr_delay)
+ mdelay(pwr_delay);
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static int __init pmz_console_init(void)
+{
+ /* Probe ports */
+ pmz_probe();
+
+ /* TODO: Autoprobe console based on OF */
+ /* pmz_console.index = i; */
+ register_console(&pmz_console);
+
+ return 0;
+
+}
+console_initcall(pmz_console_init);
+#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
+
+module_init(init_pmz);
+module_exit(exit_pmz);
diff --git a/drivers/serial/pmac_zilog.h b/drivers/serial/pmac_zilog.h
new file mode 100644
index 00000000000..c03f9bfacdd
--- /dev/null
+++ b/drivers/serial/pmac_zilog.h
@@ -0,0 +1,382 @@
+#ifndef __PMAC_ZILOG_H__
+#define __PMAC_ZILOG_H__
+
+#define pmz_debug(fmt,arg...) dev_dbg(&uap->dev->ofdev.dev, fmt, ## arg)
+
+/*
+ * At most 2 ESCCs with 2 ports each
+ */
+#define MAX_ZS_PORTS 4
+
+/*
+ * We wrap our port structure around the generic uart_port.
+ */
+#define NUM_ZSREGS 17
+
+struct uart_pmac_port {
+ struct uart_port port;
+ struct uart_pmac_port *mate;
+
+ /* macio_dev for the escc holding this port (maybe be null on
+ * early inited port)
+ */
+ struct macio_dev *dev;
+ /* device node to this port, this points to one of 2 childs
+ * of "escc" node (ie. ch-a or ch-b)
+ */
+ struct device_node *node;
+
+ /* Port type as obtained from device tree (IRDA, modem, ...) */
+ int port_type;
+ u8 curregs[NUM_ZSREGS];
+
+ unsigned int flags;
+#define PMACZILOG_FLAG_IS_CONS 0x00000001
+#define PMACZILOG_FLAG_IS_KGDB 0x00000002
+#define PMACZILOG_FLAG_MODEM_STATUS 0x00000004
+#define PMACZILOG_FLAG_IS_CHANNEL_A 0x00000008
+#define PMACZILOG_FLAG_REGS_HELD 0x00000010
+#define PMACZILOG_FLAG_TX_STOPPED 0x00000020
+#define PMACZILOG_FLAG_TX_ACTIVE 0x00000040
+#define PMACZILOG_FLAG_ENABLED 0x00000080
+#define PMACZILOG_FLAG_IS_IRDA 0x00000100
+#define PMACZILOG_FLAG_IS_INTMODEM 0x00000200
+#define PMACZILOG_FLAG_HAS_DMA 0x00000400
+#define PMACZILOG_FLAG_RSRC_REQUESTED 0x00000800
+#define PMACZILOG_FLAG_IS_ASLEEP 0x00001000
+#define PMACZILOG_FLAG_IS_OPEN 0x00002000
+#define PMACZILOG_FLAG_IS_IRQ_ON 0x00004000
+#define PMACZILOG_FLAG_IS_EXTCLK 0x00008000
+#define PMACZILOG_FLAG_BREAK 0x00010000
+
+ unsigned char parity_mask;
+ unsigned char prev_status;
+
+ volatile u8 __iomem *control_reg;
+ volatile u8 __iomem *data_reg;
+
+ unsigned int tx_dma_irq;
+ unsigned int rx_dma_irq;
+ volatile struct dbdma_regs __iomem *tx_dma_regs;
+ volatile struct dbdma_regs __iomem *rx_dma_regs;
+
+ struct termios termios_cache;
+};
+
+#define to_pmz(p) ((struct uart_pmac_port *)(p))
+
+static inline struct uart_pmac_port *pmz_get_port_A(struct uart_pmac_port *uap)
+{
+ if (uap->flags & PMACZILOG_FLAG_IS_CHANNEL_A)
+ return uap;
+ return uap->mate;
+}
+
+/*
+ * Register acessors. Note that we don't need to enforce a recovery
+ * delay on PCI PowerMac hardware, it's dealt in HW by the MacIO chip,
+ * though if we try to use this driver on older machines, we might have
+ * to add it back
+ */
+static inline u8 read_zsreg(struct uart_pmac_port *port, u8 reg)
+{
+ if (reg != 0)
+ writeb(reg, port->control_reg);
+ return readb(port->control_reg);
+}
+
+static inline void write_zsreg(struct uart_pmac_port *port, u8 reg, u8 value)
+{
+ if (reg != 0)
+ writeb(reg, port->control_reg);
+ writeb(value, port->control_reg);
+}
+
+static inline u8 read_zsdata(struct uart_pmac_port *port)
+{
+ return readb(port->data_reg);
+}
+
+static inline void write_zsdata(struct uart_pmac_port *port, u8 data)
+{
+ writeb(data, port->data_reg);
+}
+
+static inline void zssync(struct uart_pmac_port *port)
+{
+ (void)readb(port->control_reg);
+}
+
+/* Conversion routines to/from brg time constants from/to bits
+ * per second.
+ */
+#define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2))
+#define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2)
+
+#define ZS_CLOCK 3686400 /* Z8530 RTxC input clock rate */
+
+/* The Zilog register set */
+
+#define FLAG 0x7e
+
+/* Write Register 0 */
+#define R0 0 /* Register selects */
+#define R1 1
+#define R2 2
+#define R3 3
+#define R4 4
+#define R5 5
+#define R6 6
+#define R7 7
+#define R8 8
+#define R9 9
+#define R10 10
+#define R11 11
+#define R12 12
+#define R13 13
+#define R14 14
+#define R15 15
+#define R7P 16
+
+#define NULLCODE 0 /* Null Code */
+#define POINT_HIGH 0x8 /* Select upper half of registers */
+#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */
+#define SEND_ABORT 0x18 /* HDLC Abort */
+#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */
+#define RES_Tx_P 0x28 /* Reset TxINT Pending */
+#define ERR_RES 0x30 /* Error Reset */
+#define RES_H_IUS 0x38 /* Reset highest IUS */
+
+#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */
+#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */
+#define RES_EOM_L 0xC0 /* Reset EOM latch */
+
+/* Write Register 1 */
+
+#define EXT_INT_ENAB 0x1 /* Ext Int Enable */
+#define TxINT_ENAB 0x2 /* Tx Int Enable */
+#define PAR_SPEC 0x4 /* Parity is special condition */
+
+#define RxINT_DISAB 0 /* Rx Int Disable */
+#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */
+#define INT_ALL_Rx 0x10 /* Int on all Rx Characters or error */
+#define INT_ERR_Rx 0x18 /* Int on error only */
+#define RxINT_MASK 0x18
+
+#define WT_RDY_RT 0x20 /* W/Req reflects recv if 1, xmit if 0 */
+#define WT_FN_RDYFN 0x40 /* W/Req pin is DMA request if 1, wait if 0 */
+#define WT_RDY_ENAB 0x80 /* Enable W/Req pin */
+
+/* Write Register #2 (Interrupt Vector) */
+
+/* Write Register 3 */
+
+#define RxENABLE 0x1 /* Rx Enable */
+#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */
+#define ADD_SM 0x4 /* Address Search Mode (SDLC) */
+#define RxCRC_ENAB 0x8 /* Rx CRC Enable */
+#define ENT_HM 0x10 /* Enter Hunt Mode */
+#define AUTO_ENAB 0x20 /* Auto Enables */
+#define Rx5 0x0 /* Rx 5 Bits/Character */
+#define Rx7 0x40 /* Rx 7 Bits/Character */
+#define Rx6 0x80 /* Rx 6 Bits/Character */
+#define Rx8 0xc0 /* Rx 8 Bits/Character */
+#define RxN_MASK 0xc0
+
+/* Write Register 4 */
+
+#define PAR_ENAB 0x1 /* Parity Enable */
+#define PAR_EVEN 0x2 /* Parity Even/Odd* */
+
+#define SYNC_ENAB 0 /* Sync Modes Enable */
+#define SB1 0x4 /* 1 stop bit/char */
+#define SB15 0x8 /* 1.5 stop bits/char */
+#define SB2 0xc /* 2 stop bits/char */
+#define SB_MASK 0xc
+
+#define MONSYNC 0 /* 8 Bit Sync character */
+#define BISYNC 0x10 /* 16 bit sync character */
+#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */
+#define EXTSYNC 0x30 /* External Sync Mode */
+
+#define X1CLK 0x0 /* x1 clock mode */
+#define X16CLK 0x40 /* x16 clock mode */
+#define X32CLK 0x80 /* x32 clock mode */
+#define X64CLK 0xC0 /* x64 clock mode */
+#define XCLK_MASK 0xC0
+
+/* Write Register 5 */
+
+#define TxCRC_ENAB 0x1 /* Tx CRC Enable */
+#define RTS 0x2 /* RTS */
+#define SDLC_CRC 0x4 /* SDLC/CRC-16 */
+#define TxENABLE 0x8 /* Tx Enable */
+#define SND_BRK 0x10 /* Send Break */
+#define Tx5 0x0 /* Tx 5 bits (or less)/character */
+#define Tx7 0x20 /* Tx 7 bits/character */
+#define Tx6 0x40 /* Tx 6 bits/character */
+#define Tx8 0x60 /* Tx 8 bits/character */
+#define TxN_MASK 0x60
+#define DTR 0x80 /* DTR */
+
+/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */
+
+/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */
+
+/* Write Register 7' (Some enhanced feature control) */
+#define ENEXREAD 0x40 /* Enable read of some write registers */
+
+/* Write Register 8 (transmit buffer) */
+
+/* Write Register 9 (Master interrupt control) */
+#define VIS 1 /* Vector Includes Status */
+#define NV 2 /* No Vector */
+#define DLC 4 /* Disable Lower Chain */
+#define MIE 8 /* Master Interrupt Enable */
+#define STATHI 0x10 /* Status high */
+#define NORESET 0 /* No reset on write to R9 */
+#define CHRB 0x40 /* Reset channel B */
+#define CHRA 0x80 /* Reset channel A */
+#define FHWRES 0xc0 /* Force hardware reset */
+
+/* Write Register 10 (misc control bits) */
+#define BIT6 1 /* 6 bit/8bit sync */
+#define LOOPMODE 2 /* SDLC Loop mode */
+#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */
+#define MARKIDLE 8 /* Mark/flag on idle */
+#define GAOP 0x10 /* Go active on poll */
+#define NRZ 0 /* NRZ mode */
+#define NRZI 0x20 /* NRZI mode */
+#define FM1 0x40 /* FM1 (transition = 1) */
+#define FM0 0x60 /* FM0 (transition = 0) */
+#define CRCPS 0x80 /* CRC Preset I/O */
+
+/* Write Register 11 (Clock Mode control) */
+#define TRxCXT 0 /* TRxC = Xtal output */
+#define TRxCTC 1 /* TRxC = Transmit clock */
+#define TRxCBR 2 /* TRxC = BR Generator Output */
+#define TRxCDP 3 /* TRxC = DPLL output */
+#define TRxCOI 4 /* TRxC O/I */
+#define TCRTxCP 0 /* Transmit clock = RTxC pin */
+#define TCTRxCP 8 /* Transmit clock = TRxC pin */
+#define TCBR 0x10 /* Transmit clock = BR Generator output */
+#define TCDPLL 0x18 /* Transmit clock = DPLL output */
+#define RCRTxCP 0 /* Receive clock = RTxC pin */
+#define RCTRxCP 0x20 /* Receive clock = TRxC pin */
+#define RCBR 0x40 /* Receive clock = BR Generator output */
+#define RCDPLL 0x60 /* Receive clock = DPLL output */
+#define RTxCX 0x80 /* RTxC Xtal/No Xtal */
+
+/* Write Register 12 (lower byte of baud rate generator time constant) */
+
+/* Write Register 13 (upper byte of baud rate generator time constant) */
+
+/* Write Register 14 (Misc control bits) */
+#define BRENAB 1 /* Baud rate generator enable */
+#define BRSRC 2 /* Baud rate generator source */
+#define DTRREQ 4 /* DTR/Request function */
+#define AUTOECHO 8 /* Auto Echo */
+#define LOOPBAK 0x10 /* Local loopback */
+#define SEARCH 0x20 /* Enter search mode */
+#define RMC 0x40 /* Reset missing clock */
+#define DISDPLL 0x60 /* Disable DPLL */
+#define SSBR 0x80 /* Set DPLL source = BR generator */
+#define SSRTxC 0xa0 /* Set DPLL source = RTxC */
+#define SFMM 0xc0 /* Set FM mode */
+#define SNRZI 0xe0 /* Set NRZI mode */
+
+/* Write Register 15 (external/status interrupt control) */
+#define EN85C30 1 /* Enable some 85c30-enhanced registers */
+#define ZCIE 2 /* Zero count IE */
+#define ENSTFIFO 4 /* Enable status FIFO (SDLC) */
+#define DCDIE 8 /* DCD IE */
+#define SYNCIE 0x10 /* Sync/hunt IE */
+#define CTSIE 0x20 /* CTS IE */
+#define TxUIE 0x40 /* Tx Underrun/EOM IE */
+#define BRKIE 0x80 /* Break/Abort IE */
+
+
+/* Read Register 0 */
+#define Rx_CH_AV 0x1 /* Rx Character Available */
+#define ZCOUNT 0x2 /* Zero count */
+#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */
+#define DCD 0x8 /* DCD */
+#define SYNC_HUNT 0x10 /* Sync/hunt */
+#define CTS 0x20 /* CTS */
+#define TxEOM 0x40 /* Tx underrun */
+#define BRK_ABRT 0x80 /* Break/Abort */
+
+/* Read Register 1 */
+#define ALL_SNT 0x1 /* All sent */
+/* Residue Data for 8 Rx bits/char programmed */
+#define RES3 0x8 /* 0/3 */
+#define RES4 0x4 /* 0/4 */
+#define RES5 0xc /* 0/5 */
+#define RES6 0x2 /* 0/6 */
+#define RES7 0xa /* 0/7 */
+#define RES8 0x6 /* 0/8 */
+#define RES18 0xe /* 1/8 */
+#define RES28 0x0 /* 2/8 */
+/* Special Rx Condition Interrupts */
+#define PAR_ERR 0x10 /* Parity error */
+#define Rx_OVR 0x20 /* Rx Overrun Error */
+#define CRC_ERR 0x40 /* CRC/Framing Error */
+#define END_FR 0x80 /* End of Frame (SDLC) */
+
+/* Read Register 2 (channel b only) - Interrupt vector */
+#define CHB_Tx_EMPTY 0x00
+#define CHB_EXT_STAT 0x02
+#define CHB_Rx_AVAIL 0x04
+#define CHB_SPECIAL 0x06
+#define CHA_Tx_EMPTY 0x08
+#define CHA_EXT_STAT 0x0a
+#define CHA_Rx_AVAIL 0x0c
+#define CHA_SPECIAL 0x0e
+#define STATUS_MASK 0x06
+
+/* Read Register 3 (interrupt pending register) ch a only */
+#define CHBEXT 0x1 /* Channel B Ext/Stat IP */
+#define CHBTxIP 0x2 /* Channel B Tx IP */
+#define CHBRxIP 0x4 /* Channel B Rx IP */
+#define CHAEXT 0x8 /* Channel A Ext/Stat IP */
+#define CHATxIP 0x10 /* Channel A Tx IP */
+#define CHARxIP 0x20 /* Channel A Rx IP */
+
+/* Read Register 8 (receive data register) */
+
+/* Read Register 10 (misc status bits) */
+#define ONLOOP 2 /* On loop */
+#define LOOPSEND 0x10 /* Loop sending */
+#define CLK2MIS 0x40 /* Two clocks missing */
+#define CLK1MIS 0x80 /* One clock missing */
+
+/* Read Register 12 (lower byte of baud rate generator constant) */
+
+/* Read Register 13 (upper byte of baud rate generator constant) */
+
+/* Read Register 15 (value of WR 15) */
+
+/* Misc macros */
+#define ZS_CLEARERR(port) (write_zsreg(port, 0, ERR_RES))
+#define ZS_CLEARFIFO(port) do { volatile unsigned char garbage; \
+ garbage = read_zsdata(port); \
+ garbage = read_zsdata(port); \
+ garbage = read_zsdata(port); \
+ } while(0)
+
+#define ZS_IS_CONS(UP) ((UP)->flags & PMACZILOG_FLAG_IS_CONS)
+#define ZS_IS_KGDB(UP) ((UP)->flags & PMACZILOG_FLAG_IS_KGDB)
+#define ZS_IS_CHANNEL_A(UP) ((UP)->flags & PMACZILOG_FLAG_IS_CHANNEL_A)
+#define ZS_REGS_HELD(UP) ((UP)->flags & PMACZILOG_FLAG_REGS_HELD)
+#define ZS_TX_STOPPED(UP) ((UP)->flags & PMACZILOG_FLAG_TX_STOPPED)
+#define ZS_TX_ACTIVE(UP) ((UP)->flags & PMACZILOG_FLAG_TX_ACTIVE)
+#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & PMACZILOG_FLAG_MODEM_STATUS)
+#define ZS_IS_IRDA(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRDA)
+#define ZS_IS_INTMODEM(UP) ((UP)->flags & PMACZILOG_FLAG_IS_INTMODEM)
+#define ZS_HAS_DMA(UP) ((UP)->flags & PMACZILOG_FLAG_HAS_DMA)
+#define ZS_IS_ASLEEP(UP) ((UP)->flags & PMACZILOG_FLAG_IS_ASLEEP)
+#define ZS_IS_OPEN(UP) ((UP)->flags & PMACZILOG_FLAG_IS_OPEN)
+#define ZS_IS_IRQ_ON(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRQ_ON)
+#define ZS_IS_EXTCLK(UP) ((UP)->flags & PMACZILOG_FLAG_IS_EXTCLK)
+
+#endif /* __PMAC_ZILOG_H__ */
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
new file mode 100644
index 00000000000..68b25b2c26b
--- /dev/null
+++ b/drivers/serial/pxa.c
@@ -0,0 +1,877 @@
+/*
+ * linux/drivers/serial/pxa.c
+ *
+ * Based on drivers/serial/8250.c by Russell King.
+ *
+ * Author: Nicolas Pitre
+ * Created: Feb 20, 2003
+ * Copyright: (C) 2003 Monta Vista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Note 1: This driver is made separate from the already too overloaded
+ * 8250.c because it needs some kirks of its own and that'll make it
+ * easier to add DMA support.
+ *
+ * Note 2: I'm too sick of device allocation policies for serial ports.
+ * If someone else wants to request an "official" allocation of major/minor
+ * for this driver please be my guest. And don't forget that new hardware
+ * to come from Intel might have more than 3 or 4 of those UARTs. Let's
+ * hope for a better port registration and dynamic device allocation scheme
+ * with the serial core maintainer satisfaction to appear soon.
+ */
+
+#include <linux/config.h>
+
+#if defined(CONFIG_SERIAL_PXA_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/serial_reg.h>
+#include <linux/circ_buf.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/arch/pxa-regs.h>
+
+
+struct uart_pxa_port {
+ struct uart_port port;
+ unsigned char ier;
+ unsigned char lcr;
+ unsigned char mcr;
+ unsigned int lsr_break_flag;
+ unsigned int cken;
+ char *name;
+};
+
+static inline unsigned int serial_in(struct uart_pxa_port *up, int offset)
+{
+ offset <<= 2;
+ return readl(up->port.membase + offset);
+}
+
+static inline void serial_out(struct uart_pxa_port *up, int offset, int value)
+{
+ offset <<= 2;
+ writel(value, up->port.membase + offset);
+}
+
+static void serial_pxa_enable_ms(struct uart_port *port)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+
+ up->ier |= UART_IER_MSI;
+ serial_out(up, UART_IER, up->ier);
+}
+
+static void serial_pxa_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+
+ if (up->ier & UART_IER_THRI) {
+ up->ier &= ~UART_IER_THRI;
+ serial_out(up, UART_IER, up->ier);
+ }
+}
+
+static void serial_pxa_stop_rx(struct uart_port *port)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+
+ up->ier &= ~UART_IER_RLSI;
+ up->port.read_status_mask &= ~UART_LSR_DR;
+ serial_out(up, UART_IER, up->ier);
+}
+
+static inline void
+receive_chars(struct uart_pxa_port *up, int *status, struct pt_regs *regs)
+{
+ struct tty_struct *tty = up->port.info->tty;
+ unsigned int ch, flag;
+ int max_count = 256;
+
+ do {
+ if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
+ if (tty->low_latency)
+ tty_flip_buffer_push(tty);
+ /*
+ * If this failed then we will throw away the
+ * bytes but must do so to clear interrupts
+ */
+ }
+ ch = serial_in(up, UART_RX);
+ flag = TTY_NORMAL;
+ up->port.icount.rx++;
+
+ if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
+ UART_LSR_FE | UART_LSR_OE))) {
+ /*
+ * For statistics only
+ */
+ if (*status & UART_LSR_BI) {
+ *status &= ~(UART_LSR_FE | UART_LSR_PE);
+ up->port.icount.brk++;
+ /*
+ * We do the SysRQ and SAK checking
+ * here because otherwise the break
+ * may get masked by ignore_status_mask
+ * or read_status_mask.
+ */
+ if (uart_handle_break(&up->port))
+ goto ignore_char;
+ } else if (*status & UART_LSR_PE)
+ up->port.icount.parity++;
+ else if (*status & UART_LSR_FE)
+ up->port.icount.frame++;
+ if (*status & UART_LSR_OE)
+ up->port.icount.overrun++;
+
+ /*
+ * Mask off conditions which should be ignored.
+ */
+ *status &= up->port.read_status_mask;
+
+#ifdef CONFIG_SERIAL_PXA_CONSOLE
+ if (up->port.line == up->port.cons->index) {
+ /* Recover the break flag from console xmit */
+ *status |= up->lsr_break_flag;
+ up->lsr_break_flag = 0;
+ }
+#endif
+ if (*status & UART_LSR_BI) {
+ flag = TTY_BREAK;
+ } else if (*status & UART_LSR_PE)
+ flag = TTY_PARITY;
+ else if (*status & UART_LSR_FE)
+ flag = TTY_FRAME;
+ }
+ if (uart_handle_sysrq_char(&up->port, ch, regs))
+ goto ignore_char;
+ if ((*status & up->port.ignore_status_mask) == 0) {
+ tty_insert_flip_char(tty, ch, flag);
+ }
+ if ((*status & UART_LSR_OE) &&
+ tty->flip.count < TTY_FLIPBUF_SIZE) {
+ /*
+ * Overrun is special, since it's reported
+ * immediately, and doesn't affect the current
+ * character.
+ */
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ }
+ ignore_char:
+ *status = serial_in(up, UART_LSR);
+ } while ((*status & UART_LSR_DR) && (max_count-- > 0));
+ tty_flip_buffer_push(tty);
+}
+
+static void transmit_chars(struct uart_pxa_port *up)
+{
+ struct circ_buf *xmit = &up->port.info->xmit;
+ int count;
+
+ if (up->port.x_char) {
+ serial_out(up, UART_TX, up->port.x_char);
+ up->port.icount.tx++;
+ up->port.x_char = 0;
+ return;
+ }
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
+ serial_pxa_stop_tx(&up->port, 0);
+ return;
+ }
+
+ count = up->port.fifosize / 2;
+ do {
+ serial_out(up, UART_TX, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ up->port.icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ } while (--count > 0);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+
+
+ if (uart_circ_empty(xmit))
+ serial_pxa_stop_tx(&up->port, 0);
+}
+
+static void serial_pxa_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+
+ if (!(up->ier & UART_IER_THRI)) {
+ up->ier |= UART_IER_THRI;
+ serial_out(up, UART_IER, up->ier);
+ }
+}
+
+static inline void check_modem_status(struct uart_pxa_port *up)
+{
+ int status;
+
+ status = serial_in(up, UART_MSR);
+
+ if ((status & UART_MSR_ANY_DELTA) == 0)
+ return;
+
+ if (status & UART_MSR_TERI)
+ up->port.icount.rng++;
+ if (status & UART_MSR_DDSR)
+ up->port.icount.dsr++;
+ if (status & UART_MSR_DDCD)
+ uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
+ if (status & UART_MSR_DCTS)
+ uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
+
+ wake_up_interruptible(&up->port.info->delta_msr_wait);
+}
+
+/*
+ * This handles the interrupt from one port.
+ */
+static inline irqreturn_t
+serial_pxa_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)dev_id;
+ unsigned int iir, lsr;
+
+ iir = serial_in(up, UART_IIR);
+ if (iir & UART_IIR_NO_INT)
+ return IRQ_NONE;
+ lsr = serial_in(up, UART_LSR);
+ if (lsr & UART_LSR_DR)
+ receive_chars(up, &lsr, regs);
+ check_modem_status(up);
+ if (lsr & UART_LSR_THRE)
+ transmit_chars(up);
+ return IRQ_HANDLED;
+}
+
+static unsigned int serial_pxa_tx_empty(struct uart_port *port)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+ unsigned long flags;
+ unsigned int ret;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return ret;
+}
+
+static unsigned int serial_pxa_get_mctrl(struct uart_port *port)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+ unsigned long flags;
+ unsigned char status;
+ unsigned int ret;
+
+return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+ spin_lock_irqsave(&up->port.lock, flags);
+ status = serial_in(up, UART_MSR);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ ret = 0;
+ if (status & UART_MSR_DCD)
+ ret |= TIOCM_CAR;
+ if (status & UART_MSR_RI)
+ ret |= TIOCM_RNG;
+ if (status & UART_MSR_DSR)
+ ret |= TIOCM_DSR;
+ if (status & UART_MSR_CTS)
+ ret |= TIOCM_CTS;
+ return ret;
+}
+
+static void serial_pxa_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+ unsigned char mcr = 0;
+
+ if (mctrl & TIOCM_RTS)
+ mcr |= UART_MCR_RTS;
+ if (mctrl & TIOCM_DTR)
+ mcr |= UART_MCR_DTR;
+ if (mctrl & TIOCM_OUT1)
+ mcr |= UART_MCR_OUT1;
+ if (mctrl & TIOCM_OUT2)
+ mcr |= UART_MCR_OUT2;
+ if (mctrl & TIOCM_LOOP)
+ mcr |= UART_MCR_LOOP;
+
+ mcr |= up->mcr;
+
+ serial_out(up, UART_MCR, mcr);
+}
+
+static void serial_pxa_break_ctl(struct uart_port *port, int break_state)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ if (break_state == -1)
+ up->lcr |= UART_LCR_SBC;
+ else
+ up->lcr &= ~UART_LCR_SBC;
+ serial_out(up, UART_LCR, up->lcr);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+#if 0
+static void serial_pxa_dma_init(struct pxa_uart *up)
+{
+ up->rxdma =
+ pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_receive_dma, up);
+ if (up->rxdma < 0)
+ goto out;
+ up->txdma =
+ pxa_request_dma(up->name, DMA_PRIO_LOW, pxa_transmit_dma, up);
+ if (up->txdma < 0)
+ goto err_txdma;
+ up->dmadesc = kmalloc(4 * sizeof(pxa_dma_desc), GFP_KERNEL);
+ if (!up->dmadesc)
+ goto err_alloc;
+
+ /* ... */
+err_alloc:
+ pxa_free_dma(up->txdma);
+err_rxdma:
+ pxa_free_dma(up->rxdma);
+out:
+ return;
+}
+#endif
+
+static int serial_pxa_startup(struct uart_port *port)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+ unsigned long flags;
+ int retval;
+
+ up->mcr = 0;
+
+ /*
+ * Allocate the IRQ
+ */
+ retval = request_irq(up->port.irq, serial_pxa_irq, 0, up->name, up);
+ if (retval)
+ return retval;
+
+ /*
+ * Clear the FIFO buffers and disable them.
+ * (they will be reenabled in set_termios())
+ */
+ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+ serial_out(up, UART_FCR, 0);
+
+ /*
+ * Clear the interrupt registers.
+ */
+ (void) serial_in(up, UART_LSR);
+ (void) serial_in(up, UART_RX);
+ (void) serial_in(up, UART_IIR);
+ (void) serial_in(up, UART_MSR);
+
+ /*
+ * Now, initialize the UART
+ */
+ serial_out(up, UART_LCR, UART_LCR_WLEN8);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ up->port.mctrl |= TIOCM_OUT2;
+ serial_pxa_set_mctrl(&up->port, up->port.mctrl);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /*
+ * Finally, enable interrupts. Note: Modem status interrupts
+ * are set via set_termios(), which will be occuring imminently
+ * anyway, so we don't enable them here.
+ */
+ up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE | UART_IER_UUE;
+ serial_out(up, UART_IER, up->ier);
+
+ /*
+ * And clear the interrupt registers again for luck.
+ */
+ (void) serial_in(up, UART_LSR);
+ (void) serial_in(up, UART_RX);
+ (void) serial_in(up, UART_IIR);
+ (void) serial_in(up, UART_MSR);
+
+ return 0;
+}
+
+static void serial_pxa_shutdown(struct uart_port *port)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+ unsigned long flags;
+
+ free_irq(up->port.irq, up);
+
+ /*
+ * Disable interrupts from this port
+ */
+ up->ier = 0;
+ serial_out(up, UART_IER, 0);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ up->port.mctrl &= ~TIOCM_OUT2;
+ serial_pxa_set_mctrl(&up->port, up->port.mctrl);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /*
+ * Disable break condition and FIFOs
+ */
+ serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC);
+ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR |
+ UART_FCR_CLEAR_XMIT);
+ serial_out(up, UART_FCR, 0);
+}
+
+static void
+serial_pxa_set_termios(struct uart_port *port, struct termios *termios,
+ struct termios *old)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+ unsigned char cval, fcr = 0;
+ unsigned long flags;
+ unsigned int baud, quot;
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ cval = 0x00;
+ break;
+ case CS6:
+ cval = 0x01;
+ break;
+ case CS7:
+ cval = 0x02;
+ break;
+ default:
+ case CS8:
+ cval = 0x03;
+ break;
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ cval |= 0x04;
+ if (termios->c_cflag & PARENB)
+ cval |= UART_LCR_PARITY;
+ if (!(termios->c_cflag & PARODD))
+ cval |= UART_LCR_EPAR;
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ quot = uart_get_divisor(port, baud);
+
+ if ((up->port.uartclk / quot) < (2400 * 16))
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR1;
+ else
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR8;
+
+ /*
+ * Ok, we're now changing the port state. Do it with
+ * interrupts disabled.
+ */
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ /*
+ * Ensure the port will be enabled.
+ * This is required especially for serial console.
+ */
+ up->ier |= IER_UUE;
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, quot);
+
+ up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
+ if (termios->c_iflag & INPCK)
+ up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ up->port.read_status_mask |= UART_LSR_BI;
+
+ /*
+ * Characters to ignore
+ */
+ up->port.ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
+ if (termios->c_iflag & IGNBRK) {
+ up->port.ignore_status_mask |= UART_LSR_BI;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_OE;
+ }
+
+ /*
+ * ignore all characters if CREAD is not set
+ */
+ if ((termios->c_cflag & CREAD) == 0)
+ up->port.ignore_status_mask |= UART_LSR_DR;
+
+ /*
+ * CTS flow control flag and modem status interrupts
+ */
+ up->ier &= ~UART_IER_MSI;
+ if (UART_ENABLE_MS(&up->port, termios->c_cflag))
+ up->ier |= UART_IER_MSI;
+
+ serial_out(up, UART_IER, up->ier);
+
+ serial_out(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
+ serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */
+ serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */
+ serial_out(up, UART_LCR, cval); /* reset DLAB */
+ up->lcr = cval; /* Save LCR */
+ serial_pxa_set_mctrl(&up->port, up->port.mctrl);
+ serial_out(up, UART_FCR, fcr);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void
+serial_pxa_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+ pxa_set_cken(up->cken, !state);
+ if (!state)
+ udelay(1);
+}
+
+static void serial_pxa_release_port(struct uart_port *port)
+{
+}
+
+static int serial_pxa_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+static void serial_pxa_config_port(struct uart_port *port, int flags)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+ up->port.type = PORT_PXA;
+}
+
+static int
+serial_pxa_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ /* we don't want the core code to modify any port params */
+ return -EINVAL;
+}
+
+static const char *
+serial_pxa_type(struct uart_port *port)
+{
+ struct uart_pxa_port *up = (struct uart_pxa_port *)port;
+ return up->name;
+}
+
+#ifdef CONFIG_SERIAL_PXA_CONSOLE
+
+extern struct uart_pxa_port serial_pxa_ports[];
+extern struct uart_driver serial_pxa_reg;
+
+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+
+/*
+ * Wait for transmitter & holding register to empty
+ */
+static inline void wait_for_xmitr(struct uart_pxa_port *up)
+{
+ unsigned int status, tmout = 10000;
+
+ /* Wait up to 10ms for the character(s) to be sent. */
+ do {
+ status = serial_in(up, UART_LSR);
+
+ if (status & UART_LSR_BI)
+ up->lsr_break_flag = UART_LSR_BI;
+
+ if (--tmout == 0)
+ break;
+ udelay(1);
+ } while ((status & BOTH_EMPTY) != BOTH_EMPTY);
+
+ /* Wait up to 1s for flow control if necessary */
+ if (up->port.flags & UPF_CONS_FLOW) {
+ tmout = 1000000;
+ while (--tmout &&
+ ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
+ udelay(1);
+ }
+}
+
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ *
+ * The console_lock must be held when we get here.
+ */
+static void
+serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct uart_pxa_port *up = &serial_pxa_ports[co->index];
+ unsigned int ier;
+ int i;
+
+ /*
+ * First save the UER then disable the interrupts
+ */
+ ier = serial_in(up, UART_IER);
+ serial_out(up, UART_IER, UART_IER_UUE);
+
+ /*
+ * Now, do each character
+ */
+ for (i = 0; i < count; i++, s++) {
+ wait_for_xmitr(up);
+
+ /*
+ * Send the character out.
+ * If a LF, also do CR...
+ */
+ serial_out(up, UART_TX, *s);
+ if (*s == 10) {
+ wait_for_xmitr(up);
+ serial_out(up, UART_TX, 13);
+ }
+ }
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the IER
+ */
+ wait_for_xmitr(up);
+ serial_out(up, UART_IER, ier);
+}
+
+static int __init
+serial_pxa_console_setup(struct console *co, char *options)
+{
+ struct uart_pxa_port *up;
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (co->index == -1 || co->index >= serial_pxa_reg.nr)
+ co->index = 0;
+ up = &serial_pxa_ports[co->index];
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(&up->port, co, baud, parity, bits, flow);
+}
+
+static struct console serial_pxa_console = {
+ .name = "ttyS",
+ .write = serial_pxa_console_write,
+ .device = uart_console_device,
+ .setup = serial_pxa_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &serial_pxa_reg,
+};
+
+static int __init
+serial_pxa_console_init(void)
+{
+ register_console(&serial_pxa_console);
+ return 0;
+}
+
+console_initcall(serial_pxa_console_init);
+
+#define PXA_CONSOLE &serial_pxa_console
+#else
+#define PXA_CONSOLE NULL
+#endif
+
+struct uart_ops serial_pxa_pops = {
+ .tx_empty = serial_pxa_tx_empty,
+ .set_mctrl = serial_pxa_set_mctrl,
+ .get_mctrl = serial_pxa_get_mctrl,
+ .stop_tx = serial_pxa_stop_tx,
+ .start_tx = serial_pxa_start_tx,
+ .stop_rx = serial_pxa_stop_rx,
+ .enable_ms = serial_pxa_enable_ms,
+ .break_ctl = serial_pxa_break_ctl,
+ .startup = serial_pxa_startup,
+ .shutdown = serial_pxa_shutdown,
+ .set_termios = serial_pxa_set_termios,
+ .pm = serial_pxa_pm,
+ .type = serial_pxa_type,
+ .release_port = serial_pxa_release_port,
+ .request_port = serial_pxa_request_port,
+ .config_port = serial_pxa_config_port,
+ .verify_port = serial_pxa_verify_port,
+};
+
+static struct uart_pxa_port serial_pxa_ports[] = {
+ { /* FFUART */
+ .name = "FFUART",
+ .cken = CKEN6_FFUART,
+ .port = {
+ .type = PORT_PXA,
+ .iotype = UPIO_MEM,
+ .membase = (void *)&FFUART,
+ .mapbase = __PREG(FFUART),
+ .irq = IRQ_FFUART,
+ .uartclk = 921600 * 16,
+ .fifosize = 64,
+ .ops = &serial_pxa_pops,
+ .line = 0,
+ },
+ }, { /* BTUART */
+ .name = "BTUART",
+ .cken = CKEN7_BTUART,
+ .port = {
+ .type = PORT_PXA,
+ .iotype = UPIO_MEM,
+ .membase = (void *)&BTUART,
+ .mapbase = __PREG(BTUART),
+ .irq = IRQ_BTUART,
+ .uartclk = 921600 * 16,
+ .fifosize = 64,
+ .ops = &serial_pxa_pops,
+ .line = 1,
+ },
+ }, { /* STUART */
+ .name = "STUART",
+ .cken = CKEN5_STUART,
+ .port = {
+ .type = PORT_PXA,
+ .iotype = UPIO_MEM,
+ .membase = (void *)&STUART,
+ .mapbase = __PREG(STUART),
+ .irq = IRQ_STUART,
+ .uartclk = 921600 * 16,
+ .fifosize = 64,
+ .ops = &serial_pxa_pops,
+ .line = 2,
+ },
+ }
+};
+
+static struct uart_driver serial_pxa_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "PXA serial",
+ .devfs_name = "tts/",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+ .minor = 64,
+ .nr = ARRAY_SIZE(serial_pxa_ports),
+ .cons = PXA_CONSOLE,
+};
+
+static int serial_pxa_suspend(struct device *_dev, u32 state, u32 level)
+{
+ struct uart_pxa_port *sport = dev_get_drvdata(_dev);
+
+ if (sport && level == SUSPEND_DISABLE)
+ uart_suspend_port(&serial_pxa_reg, &sport->port);
+
+ return 0;
+}
+
+static int serial_pxa_resume(struct device *_dev, u32 level)
+{
+ struct uart_pxa_port *sport = dev_get_drvdata(_dev);
+
+ if (sport && level == RESUME_ENABLE)
+ uart_resume_port(&serial_pxa_reg, &sport->port);
+
+ return 0;
+}
+
+static int serial_pxa_probe(struct device *_dev)
+{
+ struct platform_device *dev = to_platform_device(_dev);
+
+ serial_pxa_ports[dev->id].port.dev = _dev;
+ uart_add_one_port(&serial_pxa_reg, &serial_pxa_ports[dev->id].port);
+ dev_set_drvdata(_dev, &serial_pxa_ports[dev->id]);
+ return 0;
+}
+
+static int serial_pxa_remove(struct device *_dev)
+{
+ struct uart_pxa_port *sport = dev_get_drvdata(_dev);
+
+ dev_set_drvdata(_dev, NULL);
+
+ if (sport)
+ uart_remove_one_port(&serial_pxa_reg, &sport->port);
+
+ return 0;
+}
+
+static struct device_driver serial_pxa_driver = {
+ .name = "pxa2xx-uart",
+ .bus = &platform_bus_type,
+ .probe = serial_pxa_probe,
+ .remove = serial_pxa_remove,
+
+ .suspend = serial_pxa_suspend,
+ .resume = serial_pxa_resume,
+};
+
+int __init serial_pxa_init(void)
+{
+ int ret;
+
+ ret = uart_register_driver(&serial_pxa_reg);
+ if (ret != 0)
+ return ret;
+
+ ret = driver_register(&serial_pxa_driver);
+ if (ret != 0)
+ uart_unregister_driver(&serial_pxa_reg);
+
+ return ret;
+}
+
+void __exit serial_pxa_exit(void)
+{
+ driver_unregister(&serial_pxa_driver);
+ uart_unregister_driver(&serial_pxa_reg);
+}
+
+module_init(serial_pxa_init);
+module_exit(serial_pxa_exit);
+
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
new file mode 100644
index 00000000000..ffc61389614
--- /dev/null
+++ b/drivers/serial/s3c2410.c
@@ -0,0 +1,1831 @@
+/*
+ * linux/drivers/serial/s3c2410.c
+ *
+ * Driver for onboard UARTs on the Samsung S3C24XX
+ *
+ * Based on drivers/char/serial.c and drivers/char/21285.c
+ *
+ * Ben Dooks, (c) 2003-2005 Simtec Electronics
+ * http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * Changelog:
+ *
+ * 22-Jul-2004 BJD Finished off device rewrite
+ *
+ * 21-Jul-2004 BJD Thanks to <herbet@13thfloor.at> for pointing out
+ * problems with baud rate and loss of IR settings. Update
+ * to add configuration via platform_device structure
+ *
+ * 28-Sep-2004 BJD Re-write for the following items
+ * - S3C2410 and S3C2440 serial support
+ * - Power Management support
+ * - Fix console via IrDA devices
+ * - SysReq (Herbert Pötzl)
+ * - Break character handling (Herbert Pötzl)
+ * - spin-lock initialisation (Dimitry Andric)
+ * - added clock control
+ * - updated init code to use platform_device info
+ *
+ * 06-Mar-2005 BJD Add s3c2440 fclk clock source
+ *
+ * 09-Mar-2005 BJD Add s3c2400 support
+ *
+ * 10-Mar-2005 LCVR Changed S3C2410_VA_UART to S3C24XX_VA_UART
+*/
+
+/* Note on 2440 fclk clock source handling
+ *
+ * Whilst it is possible to use the fclk as clock source, the method
+ * of properly switching too/from this is currently un-implemented, so
+ * whichever way is configured at startup is the one that will be used.
+*/
+
+/* Hote on 2410 error handling
+ *
+ * The s3c2410 manual has a love/hate affair with the contents of the
+ * UERSTAT register in the UART blocks, and keeps marking some of the
+ * error bits as reserved. Having checked with the s3c2410x01,
+ * it copes with BREAKs properly, so I am happy to ignore the RESERVED
+ * feature from the latter versions of the manual.
+ *
+ * If it becomes aparrent that latter versions of the 2410 remove these
+ * bits, then action will have to be taken to differentiate the versions
+ * and change the policy on BREAK
+ *
+ * BJD, 04-Nov-2004
+*/
+
+#include <linux/config.h>
+
+#if defined(CONFIG_SERIAL_S3C2410_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/sysrq.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/hardware/clock.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+
+#include <asm/mach-types.h>
+
+/* structures */
+
+struct s3c24xx_uart_info {
+ char *name;
+ unsigned int type;
+ unsigned int fifosize;
+ unsigned long rx_fifomask;
+ unsigned long rx_fifoshift;
+ unsigned long rx_fifofull;
+ unsigned long tx_fifomask;
+ unsigned long tx_fifoshift;
+ unsigned long tx_fifofull;
+
+ /* clock source control */
+
+ int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
+ int (*set_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
+
+ /* uart controls */
+ int (*reset_port)(struct uart_port *, struct s3c2410_uartcfg *);
+};
+
+struct s3c24xx_uart_port {
+ unsigned char rx_claimed;
+ unsigned char tx_claimed;
+
+ struct s3c24xx_uart_info *info;
+ struct s3c24xx_uart_clksrc *clksrc;
+ struct clk *clk;
+ struct clk *baudclk;
+ struct uart_port port;
+};
+
+
+/* configuration defines */
+
+#if 0
+#if 1
+/* send debug to the low-level output routines */
+
+extern void printascii(const char *);
+
+static void
+s3c24xx_serial_dbg(const char *fmt, ...)
+{
+ va_list va;
+ char buff[256];
+
+ va_start(va, fmt);
+ vsprintf(buff, fmt, va);
+ va_end(va);
+
+ printascii(buff);
+}
+
+#define dbg(x...) s3c24xx_serial_dbg(x)
+
+#else
+#define dbg(x...) printk(KERN_DEBUG "s3c24xx: ");
+#endif
+#else /* no debug */
+#define dbg(x...) do {} while(0)
+#endif
+
+/* UART name and device definitions */
+
+#define S3C24XX_SERIAL_NAME "ttySAC"
+#define S3C24XX_SERIAL_DEVFS "tts/"
+#define S3C24XX_SERIAL_MAJOR 204
+#define S3C24XX_SERIAL_MINOR 64
+
+
+/* conversion functions */
+
+#define s3c24xx_dev_to_port(__dev) (struct uart_port *)dev_get_drvdata(__dev)
+#define s3c24xx_dev_to_cfg(__dev) (struct s3c2410_uartcfg *)((__dev)->platform_data)
+
+/* we can support 3 uarts, but not always use them */
+
+#define NR_PORTS (3)
+
+/* port irq numbers */
+
+#define TX_IRQ(port) ((port)->irq + 1)
+#define RX_IRQ(port) ((port)->irq)
+
+/* register access controls */
+
+#define portaddr(port, reg) ((port)->membase + (reg))
+
+#define rd_regb(port, reg) (__raw_readb(portaddr(port, reg)))
+#define rd_regl(port, reg) (__raw_readl(portaddr(port, reg)))
+
+#define wr_regb(port, reg, val) \
+ do { __raw_writeb(val, portaddr(port, reg)); } while(0)
+
+#define wr_regl(port, reg, val) \
+ do { __raw_writel(val, portaddr(port, reg)); } while(0)
+
+/* macros to change one thing to another */
+
+#define tx_enabled(port) ((port)->unused[0])
+#define rx_enabled(port) ((port)->unused[1])
+
+/* flag to ignore all characters comming in */
+#define RXSTAT_DUMMY_READ (0x10000000)
+
+static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port)
+{
+ return container_of(port, struct s3c24xx_uart_port, port);
+}
+
+/* translate a port to the device name */
+
+static inline char *s3c24xx_serial_portname(struct uart_port *port)
+{
+ return to_platform_device(port->dev)->name;
+}
+
+static int s3c24xx_serial_txempty_nofifo(struct uart_port *port)
+{
+ return (rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE);
+}
+
+static void s3c24xx_serial_rx_enable(struct uart_port *port)
+{
+ unsigned long flags;
+ unsigned int ucon, ufcon;
+ int count = 10000;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ while (--count && !s3c24xx_serial_txempty_nofifo(port))
+ udelay(100);
+
+ ufcon = rd_regl(port, S3C2410_UFCON);
+ ufcon |= S3C2410_UFCON_RESETRX;
+ wr_regl(port, S3C2410_UFCON, ufcon);
+
+ ucon = rd_regl(port, S3C2410_UCON);
+ ucon |= S3C2410_UCON_RXIRQMODE;
+ wr_regl(port, S3C2410_UCON, ucon);
+
+ rx_enabled(port) = 1;
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void s3c24xx_serial_rx_disable(struct uart_port *port)
+{
+ unsigned long flags;
+ unsigned int ucon;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ ucon = rd_regl(port, S3C2410_UCON);
+ ucon &= ~S3C2410_UCON_RXIRQMODE;
+ wr_regl(port, S3C2410_UCON, ucon);
+
+ rx_enabled(port) = 0;
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void
+s3c24xx_serial_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ if (tx_enabled(port)) {
+ disable_irq(TX_IRQ(port));
+ tx_enabled(port) = 0;
+ if (port->flags & UPF_CONS_FLOW)
+ s3c24xx_serial_rx_enable(port);
+ }
+}
+
+static void
+s3c24xx_serial_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+ if (!tx_enabled(port)) {
+ if (port->flags & UPF_CONS_FLOW)
+ s3c24xx_serial_rx_disable(port);
+
+ enable_irq(TX_IRQ(port));
+ tx_enabled(port) = 1;
+ }
+}
+
+
+static void s3c24xx_serial_stop_rx(struct uart_port *port)
+{
+ if (rx_enabled(port)) {
+ dbg("s3c24xx_serial_stop_rx: port=%p\n", port);
+ disable_irq(RX_IRQ(port));
+ rx_enabled(port) = 0;
+ }
+}
+
+static void s3c24xx_serial_enable_ms(struct uart_port *port)
+{
+}
+
+static inline struct s3c24xx_uart_info *s3c24xx_port_to_info(struct uart_port *port)
+{
+ return to_ourport(port)->info;
+}
+
+static inline struct s3c2410_uartcfg *s3c24xx_port_to_cfg(struct uart_port *port)
+{
+ if (port->dev == NULL)
+ return NULL;
+
+ return (struct s3c2410_uartcfg *)port->dev->platform_data;
+}
+
+static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
+ unsigned long ufstat)
+{
+ struct s3c24xx_uart_info *info = ourport->info;
+
+ if (ufstat & info->rx_fifofull)
+ return info->fifosize;
+
+ return (ufstat & info->rx_fifomask) >> info->rx_fifoshift;
+}
+
+
+/* ? - where has parity gone?? */
+#define S3C2410_UERSTAT_PARITY (0x1000)
+
+static irqreturn_t
+s3c24xx_serial_rx_chars(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct s3c24xx_uart_port *ourport = dev_id;
+ struct uart_port *port = &ourport->port;
+ struct tty_struct *tty = port->info->tty;
+ unsigned int ufcon, ch, flag, ufstat, uerstat;
+ int max_count = 64;
+
+ while (max_count-- > 0) {
+ ufcon = rd_regl(port, S3C2410_UFCON);
+ ufstat = rd_regl(port, S3C2410_UFSTAT);
+
+ if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0)
+ break;
+
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
+ if (tty->low_latency)
+ tty_flip_buffer_push(tty);
+
+ /*
+ * If this failed then we will throw away the
+ * bytes but must do so to clear interrupts
+ */
+ }
+
+ uerstat = rd_regl(port, S3C2410_UERSTAT);
+ ch = rd_regb(port, S3C2410_URXH);
+
+ if (port->flags & UPF_CONS_FLOW) {
+ int txe = s3c24xx_serial_txempty_nofifo(port);
+
+ if (rx_enabled(port)) {
+ if (!txe) {
+ rx_enabled(port) = 0;
+ continue;
+ }
+ } else {
+ if (txe) {
+ ufcon |= S3C2410_UFCON_RESETRX;
+ wr_regl(port, S3C2410_UFCON, ufcon);
+ rx_enabled(port) = 1;
+ goto out;
+ }
+ continue;
+ }
+ }
+
+ /* insert the character into the buffer */
+
+ flag = TTY_NORMAL;
+ port->icount.rx++;
+
+ if (uerstat & S3C2410_UERSTAT_ANY) {
+ dbg("rxerr: port ch=0x%02x, rxs=0x%08x\n",
+ ch, uerstat);
+
+ /* check for break */
+ if (uerstat & S3C2410_UERSTAT_BREAK) {
+ dbg("break!\n");
+ port->icount.brk++;
+ if (uart_handle_break(port))
+ goto ignore_char;
+ }
+
+ if (uerstat & S3C2410_UERSTAT_FRAME)
+ port->icount.frame++;
+ if (uerstat & S3C2410_UERSTAT_OVERRUN)
+ port->icount.overrun++;
+
+ uerstat &= port->read_status_mask;
+
+ if (uerstat & S3C2410_UERSTAT_BREAK)
+ flag = TTY_BREAK;
+ else if (uerstat & S3C2410_UERSTAT_PARITY)
+ flag = TTY_PARITY;
+ else if (uerstat & ( S3C2410_UERSTAT_FRAME | S3C2410_UERSTAT_OVERRUN))
+ flag = TTY_FRAME;
+ }
+
+ if (uart_handle_sysrq_char(port, ch, regs))
+ goto ignore_char;
+
+ if ((uerstat & port->ignore_status_mask) == 0) {
+ tty_insert_flip_char(tty, ch, flag);
+ }
+
+ if ((uerstat & S3C2410_UERSTAT_OVERRUN) &&
+ tty->flip.count < TTY_FLIPBUF_SIZE) {
+ /*
+ * Overrun is special, since it's reported
+ * immediately, and doesn't affect the current
+ * character.
+ */
+
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ }
+
+ ignore_char:
+ continue;
+ }
+ tty_flip_buffer_push(tty);
+
+ out:
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id, struct pt_regs *regs)
+{
+ struct s3c24xx_uart_port *ourport = id;
+ struct uart_port *port = &ourport->port;
+ struct circ_buf *xmit = &port->info->xmit;
+ int count = 256;
+
+ if (port->x_char) {
+ wr_regb(port, S3C2410_UTXH, port->x_char);
+ port->icount.tx++;
+ port->x_char = 0;
+ goto out;
+ }
+
+ /* if there isnt anything more to transmit, or the uart is now
+ * stopped, disable the uart and exit
+ */
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ s3c24xx_serial_stop_tx(port, 0);
+ goto out;
+ }
+
+ /* try and drain the buffer... */
+
+ while (!uart_circ_empty(xmit) && count-- > 0) {
+ if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull)
+ break;
+
+ wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit))
+ s3c24xx_serial_stop_tx(port, 0);
+
+ out:
+ return IRQ_HANDLED;
+}
+
+static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
+{
+ struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+ unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT);
+ unsigned long ufcon = rd_regl(port, S3C2410_UFCON);
+
+ if (ufcon & S3C2410_UFCON_FIFOMODE) {
+ if ((ufstat & info->tx_fifomask) != 0 ||
+ (ufstat & info->tx_fifofull))
+ return 0;
+
+ return 1;
+ }
+
+ return s3c24xx_serial_txempty_nofifo(port);
+}
+
+/* no modem control lines */
+static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port)
+{
+ unsigned int umstat = rd_regb(port,S3C2410_UMSTAT);
+
+ if (umstat & S3C2410_UMSTAT_CTS)
+ return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+ else
+ return TIOCM_CAR | TIOCM_DSR;
+}
+
+static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ /* todo - possibly remove AFC and do manual CTS */
+}
+
+static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state)
+{
+ unsigned long flags;
+ unsigned int ucon;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ ucon = rd_regl(port, S3C2410_UCON);
+
+ if (break_state)
+ ucon |= S3C2410_UCON_SBREAK;
+ else
+ ucon &= ~S3C2410_UCON_SBREAK;
+
+ wr_regl(port, S3C2410_UCON, ucon);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void s3c24xx_serial_shutdown(struct uart_port *port)
+{
+ struct s3c24xx_uart_port *ourport = to_ourport(port);
+
+ if (ourport->tx_claimed) {
+ free_irq(TX_IRQ(port), ourport);
+ tx_enabled(port) = 0;
+ ourport->tx_claimed = 0;
+ }
+
+ if (ourport->rx_claimed) {
+ free_irq(RX_IRQ(port), ourport);
+ ourport->rx_claimed = 0;
+ rx_enabled(port) = 0;
+ }
+}
+
+
+static int s3c24xx_serial_startup(struct uart_port *port)
+{
+ struct s3c24xx_uart_port *ourport = to_ourport(port);
+ unsigned long flags;
+ int ret;
+
+ dbg("s3c24xx_serial_startup: port=%p (%08lx,%p)\n",
+ port->mapbase, port->membase);
+
+ local_irq_save(flags);
+
+ rx_enabled(port) = 1;
+
+ ret = request_irq(RX_IRQ(port),
+ s3c24xx_serial_rx_chars, 0,
+ s3c24xx_serial_portname(port), ourport);
+
+ if (ret != 0) {
+ printk(KERN_ERR "cannot get irq %d\n", RX_IRQ(port));
+ return ret;
+ }
+
+ ourport->rx_claimed = 1;
+
+ dbg("requesting tx irq...\n");
+
+ tx_enabled(port) = 1;
+
+ ret = request_irq(TX_IRQ(port),
+ s3c24xx_serial_tx_chars, 0,
+ s3c24xx_serial_portname(port), ourport);
+
+ if (ret) {
+ printk(KERN_ERR "cannot get irq %d\n", TX_IRQ(port));
+ goto err;
+ }
+
+ ourport->tx_claimed = 1;
+
+ dbg("s3c24xx_serial_startup ok\n");
+
+ /* the port reset code should have done the correct
+ * register setup for the port controls */
+
+ local_irq_restore(flags);
+ return ret;
+
+ err:
+ s3c24xx_serial_shutdown(port);
+ local_irq_restore(flags);
+ return ret;
+}
+
+/* power power management control */
+
+static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
+ unsigned int old)
+{
+ struct s3c24xx_uart_port *ourport = to_ourport(port);
+
+ switch (level) {
+ case 3:
+ if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
+ clk_disable(ourport->baudclk);
+
+ clk_disable(ourport->clk);
+ break;
+
+ case 0:
+ clk_enable(ourport->clk);
+
+ if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL)
+ clk_enable(ourport->baudclk);
+
+ break;
+ default:
+ printk(KERN_ERR "s3c24xx_serial: unknown pm %d\n", level);
+ }
+}
+
+/* baud rate calculation
+ *
+ * The UARTs on the S3C2410/S3C2440 can take their clocks from a number
+ * of different sources, including the peripheral clock ("pclk") and an
+ * external clock ("uclk"). The S3C2440 also adds the core clock ("fclk")
+ * with a programmable extra divisor.
+ *
+ * The following code goes through the clock sources, and calculates the
+ * baud clocks (and the resultant actual baud rates) and then tries to
+ * pick the closest one and select that.
+ *
+*/
+
+
+#define MAX_CLKS (8)
+
+static struct s3c24xx_uart_clksrc tmp_clksrc = {
+ .name = "pclk",
+ .min_baud = 0,
+ .max_baud = 0,
+ .divisor = 1,
+};
+
+static inline int
+s3c24xx_serial_getsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
+{
+ struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+
+ return (info->get_clksrc)(port, c);
+}
+
+static inline int
+s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
+{
+ struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+
+ return (info->set_clksrc)(port, c);
+}
+
+struct baud_calc {
+ struct s3c24xx_uart_clksrc *clksrc;
+ unsigned int calc;
+ unsigned int quot;
+ struct clk *src;
+};
+
+static int s3c24xx_serial_calcbaud(struct baud_calc *calc,
+ struct uart_port *port,
+ struct s3c24xx_uart_clksrc *clksrc,
+ unsigned int baud)
+{
+ unsigned long rate;
+
+ calc->src = clk_get(port->dev, clksrc->name);
+ if (calc->src == NULL || IS_ERR(calc->src))
+ return 0;
+
+ rate = clk_get_rate(calc->src);
+ rate /= clksrc->divisor;
+
+ calc->clksrc = clksrc;
+ calc->quot = (rate + (8 * baud)) / (16 * baud);
+ calc->calc = (rate / (calc->quot * 16));
+
+ calc->quot--;
+ return 1;
+}
+
+static unsigned int s3c24xx_serial_getclk(struct uart_port *port,
+ struct s3c24xx_uart_clksrc **clksrc,
+ struct clk **clk,
+ unsigned int baud)
+{
+ struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
+ struct s3c24xx_uart_clksrc *clkp;
+ struct baud_calc res[MAX_CLKS];
+ struct baud_calc *resptr, *best, *sptr;
+ int i;
+
+ clkp = cfg->clocks;
+ best = NULL;
+
+ if (cfg->clocks_size < 2) {
+ if (cfg->clocks_size == 0)
+ clkp = &tmp_clksrc;
+
+ /* check to see if we're sourcing fclk, and if so we're
+ * going to have to update the clock source
+ */
+
+ if (strcmp(clkp->name, "fclk") == 0) {
+ struct s3c24xx_uart_clksrc src;
+
+ s3c24xx_serial_getsource(port, &src);
+
+ /* check that the port already using fclk, and if
+ * not, then re-select fclk
+ */
+
+ if (strcmp(src.name, clkp->name) == 0) {
+ s3c24xx_serial_setsource(port, clkp);
+ s3c24xx_serial_getsource(port, &src);
+ }
+
+ clkp->divisor = src.divisor;
+ }
+
+ s3c24xx_serial_calcbaud(res, port, clkp, baud);
+ best = res;
+ resptr = best + 1;
+ } else {
+ resptr = res;
+
+ for (i = 0; i < cfg->clocks_size; i++, clkp++) {
+ if (s3c24xx_serial_calcbaud(resptr, port, clkp, baud))
+ resptr++;
+ }
+ }
+
+ /* ok, we now need to select the best clock we found */
+
+ if (!best) {
+ unsigned int deviation = (1<<30)|((1<<30)-1);
+ int calc_deviation;
+
+ for (sptr = res; sptr < resptr; sptr++) {
+ printk(KERN_DEBUG
+ "found clk %p (%s) quot %d, calc %d\n",
+ sptr->clksrc, sptr->clksrc->name,
+ sptr->quot, sptr->calc);
+
+ calc_deviation = baud - sptr->calc;
+ if (calc_deviation < 0)
+ calc_deviation = -calc_deviation;
+
+ if (calc_deviation < deviation) {
+ best = sptr;
+ deviation = calc_deviation;
+ }
+ }
+
+ printk(KERN_DEBUG "best %p (deviation %d)\n", best, deviation);
+ }
+
+ printk(KERN_DEBUG "selected clock %p (%s) quot %d, calc %d\n",
+ best->clksrc, best->clksrc->name, best->quot, best->calc);
+
+ /* store results to pass back */
+
+ *clksrc = best->clksrc;
+ *clk = best->src;
+
+ return best->quot;
+}
+
+static void s3c24xx_serial_set_termios(struct uart_port *port,
+ struct termios *termios,
+ struct termios *old)
+{
+ struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
+ struct s3c24xx_uart_port *ourport = to_ourport(port);
+ struct s3c24xx_uart_clksrc *clksrc;
+ struct clk *clk;
+ unsigned long flags;
+ unsigned int baud, quot;
+ unsigned int ulcon;
+ unsigned int umcon;
+
+ /*
+ * We don't support modem control lines.
+ */
+ termios->c_cflag &= ~(HUPCL | CMSPAR);
+ termios->c_cflag |= CLOCAL;
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+
+ baud = uart_get_baud_rate(port, termios, old, 0, 115200*8);
+
+ if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
+ quot = port->custom_divisor;
+ else
+ quot = s3c24xx_serial_getclk(port, &clksrc, &clk, baud);
+
+ /* check to see if we need to change clock source */
+
+ if (ourport->clksrc != clksrc || ourport->baudclk != clk) {
+ s3c24xx_serial_setsource(port, clksrc);
+
+ if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
+ clk_disable(ourport->baudclk);
+ clk_unuse(ourport->baudclk);
+ ourport->baudclk = NULL;
+ }
+
+ clk_use(clk);
+ clk_enable(clk);
+
+ ourport->clksrc = clksrc;
+ ourport->baudclk = clk;
+ }
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ dbg("config: 5bits/char\n");
+ ulcon = S3C2410_LCON_CS5;
+ break;
+ case CS6:
+ dbg("config: 6bits/char\n");
+ ulcon = S3C2410_LCON_CS6;
+ break;
+ case CS7:
+ dbg("config: 7bits/char\n");
+ ulcon = S3C2410_LCON_CS7;
+ break;
+ case CS8:
+ default:
+ dbg("config: 8bits/char\n");
+ ulcon = S3C2410_LCON_CS8;
+ break;
+ }
+
+ /* preserve original lcon IR settings */
+ ulcon |= (cfg->ulcon & S3C2410_LCON_IRM);
+
+ if (termios->c_cflag & CSTOPB)
+ ulcon |= S3C2410_LCON_STOPB;
+
+ umcon = (termios->c_cflag & CRTSCTS) ? S3C2410_UMCOM_AFC : 0;
+
+ if (termios->c_cflag & PARENB) {
+ if (termios->c_cflag & PARODD)
+ ulcon |= S3C2410_LCON_PODD;
+ else
+ ulcon |= S3C2410_LCON_PEVEN;
+ } else {
+ ulcon |= S3C2410_LCON_PNONE;
+ }
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ dbg("setting ulcon to %08x, brddiv to %d\n", ulcon, quot);
+
+ wr_regl(port, S3C2410_ULCON, ulcon);
+ wr_regl(port, S3C2410_UBRDIV, quot);
+ wr_regl(port, S3C2410_UMCON, umcon);
+
+ dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n",
+ rd_regl(port, S3C2410_ULCON),
+ rd_regl(port, S3C2410_UCON),
+ rd_regl(port, S3C2410_UFCON));
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ /*
+ * Which character status flags are we interested in?
+ */
+ port->read_status_mask = S3C2410_UERSTAT_OVERRUN;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= S3C2410_UERSTAT_FRAME | S3C2410_UERSTAT_PARITY;
+
+ /*
+ * Which character status flags should we ignore?
+ */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= S3C2410_UERSTAT_OVERRUN;
+ if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= S3C2410_UERSTAT_FRAME;
+
+ /*
+ * Ignore all characters if CREAD is not set.
+ */
+ if ((termios->c_cflag & CREAD) == 0)
+ port->ignore_status_mask |= RXSTAT_DUMMY_READ;
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *s3c24xx_serial_type(struct uart_port *port)
+{
+ switch (port->type) {
+ case PORT_S3C2410:
+ return "S3C2410";
+ case PORT_S3C2440:
+ return "S3C2440";
+ default:
+ return NULL;
+ }
+}
+
+#define MAP_SIZE (0x100)
+
+static void s3c24xx_serial_release_port(struct uart_port *port)
+{
+ release_mem_region(port->mapbase, MAP_SIZE);
+}
+
+static int s3c24xx_serial_request_port(struct uart_port *port)
+{
+ char *name = s3c24xx_serial_portname(port);
+ return request_mem_region(port->mapbase, MAP_SIZE, name) ? 0 : -EBUSY;
+}
+
+static void s3c24xx_serial_config_port(struct uart_port *port, int flags)
+{
+ struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+
+ if (flags & UART_CONFIG_TYPE &&
+ s3c24xx_serial_request_port(port) == 0)
+ port->type = info->type;
+}
+
+/*
+ * verify the new serial_struct (for TIOCSSERIAL).
+ */
+static int
+s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+
+ if (ser->type != PORT_UNKNOWN && ser->type != info->type)
+ return -EINVAL;
+
+ return 0;
+}
+
+
+#ifdef CONFIG_SERIAL_S3C2410_CONSOLE
+
+static struct console s3c24xx_serial_console;
+
+#define S3C24XX_SERIAL_CONSOLE &s3c24xx_serial_console
+#else
+#define S3C24XX_SERIAL_CONSOLE NULL
+#endif
+
+static struct uart_ops s3c24xx_serial_ops = {
+ .pm = s3c24xx_serial_pm,
+ .tx_empty = s3c24xx_serial_tx_empty,
+ .get_mctrl = s3c24xx_serial_get_mctrl,
+ .set_mctrl = s3c24xx_serial_set_mctrl,
+ .stop_tx = s3c24xx_serial_stop_tx,
+ .start_tx = s3c24xx_serial_start_tx,
+ .stop_rx = s3c24xx_serial_stop_rx,
+ .enable_ms = s3c24xx_serial_enable_ms,
+ .break_ctl = s3c24xx_serial_break_ctl,
+ .startup = s3c24xx_serial_startup,
+ .shutdown = s3c24xx_serial_shutdown,
+ .set_termios = s3c24xx_serial_set_termios,
+ .type = s3c24xx_serial_type,
+ .release_port = s3c24xx_serial_release_port,
+ .request_port = s3c24xx_serial_request_port,
+ .config_port = s3c24xx_serial_config_port,
+ .verify_port = s3c24xx_serial_verify_port,
+};
+
+
+static struct uart_driver s3c24xx_uart_drv = {
+ .owner = THIS_MODULE,
+ .dev_name = "s3c2410_serial",
+ .nr = 3,
+ .cons = S3C24XX_SERIAL_CONSOLE,
+ .driver_name = S3C24XX_SERIAL_NAME,
+ .devfs_name = S3C24XX_SERIAL_DEVFS,
+ .major = S3C24XX_SERIAL_MAJOR,
+ .minor = S3C24XX_SERIAL_MINOR,
+};
+
+static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = {
+ [0] = {
+ .port = {
+ .lock = SPIN_LOCK_UNLOCKED,
+ .iotype = UPIO_MEM,
+ .irq = IRQ_S3CUART_RX0,
+ .uartclk = 0,
+ .fifosize = 16,
+ .ops = &s3c24xx_serial_ops,
+ .flags = UPF_BOOT_AUTOCONF,
+ .line = 0,
+ }
+ },
+ [1] = {
+ .port = {
+ .lock = SPIN_LOCK_UNLOCKED,
+ .iotype = UPIO_MEM,
+ .irq = IRQ_S3CUART_RX1,
+ .uartclk = 0,
+ .fifosize = 16,
+ .ops = &s3c24xx_serial_ops,
+ .flags = UPF_BOOT_AUTOCONF,
+ .line = 1,
+ }
+ },
+#if NR_PORTS > 2
+
+ [2] = {
+ .port = {
+ .lock = SPIN_LOCK_UNLOCKED,
+ .iotype = UPIO_MEM,
+ .irq = IRQ_S3CUART_RX2,
+ .uartclk = 0,
+ .fifosize = 16,
+ .ops = &s3c24xx_serial_ops,
+ .flags = UPF_BOOT_AUTOCONF,
+ .line = 2,
+ }
+ }
+#endif
+};
+
+/* s3c24xx_serial_resetport
+ *
+ * wrapper to call the specific reset for this port (reset the fifos
+ * and the settings)
+*/
+
+static inline int s3c24xx_serial_resetport(struct uart_port * port,
+ struct s3c2410_uartcfg *cfg)
+{
+ struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+
+ return (info->reset_port)(port, cfg);
+}
+
+/* s3c24xx_serial_init_port
+ *
+ * initialise a single serial port from the platform device given
+ */
+
+static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
+ struct s3c24xx_uart_info *info,
+ struct platform_device *platdev)
+{
+ struct uart_port *port = &ourport->port;
+ struct s3c2410_uartcfg *cfg;
+ struct resource *res;
+
+ dbg("s3c24xx_serial_init_port: port=%p, platdev=%p\n", port, platdev);
+
+ if (platdev == NULL)
+ return -ENODEV;
+
+ cfg = s3c24xx_dev_to_cfg(&platdev->dev);
+
+ if (port->mapbase != 0)
+ return 0;
+
+ if (cfg->hwport > 3)
+ return -EINVAL;
+
+ /* setup info for port */
+ port->dev = &platdev->dev;
+ ourport->info = info;
+
+ /* copy the info in from provided structure */
+ ourport->port.fifosize = info->fifosize;
+
+ dbg("s3c24xx_serial_init_port: %p (hw %d)...\n", port, cfg->hwport);
+
+ port->uartclk = 1;
+
+ if (cfg->uart_flags & UPF_CONS_FLOW) {
+ dbg("s3c24xx_serial_init_port: enabling flow control\n");
+ port->flags |= UPF_CONS_FLOW;
+ }
+
+ /* sort our the physical and virtual addresses for each UART */
+
+ res = platform_get_resource(platdev, IORESOURCE_MEM, 0);
+ if (res == NULL) {
+ printk(KERN_ERR "failed to find memory resource for uart\n");
+ return -EINVAL;
+ }
+
+ dbg("resource %p (%lx..%lx)\n", res, res->start, res->end);
+
+ port->mapbase = res->start;
+ port->membase = S3C24XX_VA_UART + (res->start - S3C2410_PA_UART);
+ port->irq = platform_get_irq(platdev, 0);
+
+ ourport->clk = clk_get(&platdev->dev, "uart");
+
+ if (ourport->clk != NULL && !IS_ERR(ourport->clk))
+ clk_use(ourport->clk);
+
+ dbg("port: map=%08x, mem=%08x, irq=%d, clock=%ld\n",
+ port->mapbase, port->membase, port->irq, port->uartclk);
+
+ /* reset the fifos (and setup the uart) */
+ s3c24xx_serial_resetport(port, cfg);
+ return 0;
+}
+
+/* Device driver serial port probe */
+
+static int probe_index = 0;
+
+int s3c24xx_serial_probe(struct device *_dev,
+ struct s3c24xx_uart_info *info)
+{
+ struct s3c24xx_uart_port *ourport;
+ struct platform_device *dev = to_platform_device(_dev);
+ int ret;
+
+ dbg("s3c24xx_serial_probe(%p, %p) %d\n", _dev, info, probe_index);
+
+ ourport = &s3c24xx_serial_ports[probe_index];
+ probe_index++;
+
+ dbg("%s: initialising port %p...\n", __FUNCTION__, ourport);
+
+ ret = s3c24xx_serial_init_port(ourport, info, dev);
+ if (ret < 0)
+ goto probe_err;
+
+ dbg("%s: adding port\n", __FUNCTION__);
+ uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
+ dev_set_drvdata(_dev, &ourport->port);
+
+ return 0;
+
+ probe_err:
+ return ret;
+}
+
+int s3c24xx_serial_remove(struct device *_dev)
+{
+ struct uart_port *port = s3c24xx_dev_to_port(_dev);
+
+ if (port)
+ uart_remove_one_port(&s3c24xx_uart_drv, port);
+
+ return 0;
+}
+
+/* UART power management code */
+
+#ifdef CONFIG_PM
+
+int s3c24xx_serial_suspend(struct device *dev, u32 state, u32 level)
+{
+ struct uart_port *port = s3c24xx_dev_to_port(dev);
+
+ if (port && level == SUSPEND_DISABLE)
+ uart_suspend_port(&s3c24xx_uart_drv, port);
+
+ return 0;
+}
+
+int s3c24xx_serial_resume(struct device *dev, u32 level)
+{
+ struct uart_port *port = s3c24xx_dev_to_port(dev);
+ struct s3c24xx_uart_port *ourport = to_ourport(port);
+
+ if (port && level == RESUME_ENABLE) {
+ clk_enable(ourport->clk);
+ s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port));
+ clk_disable(ourport->clk);
+
+ uart_resume_port(&s3c24xx_uart_drv, port);
+ }
+
+ return 0;
+}
+
+#else
+#define s3c24xx_serial_suspend NULL
+#define s3c24xx_serial_resume NULL
+#endif
+
+int s3c24xx_serial_init(struct device_driver *drv,
+ struct s3c24xx_uart_info *info)
+{
+ dbg("s3c24xx_serial_init(%p,%p)\n", drv, info);
+ return driver_register(drv);
+}
+
+
+/* now comes the code to initialise either the s3c2410 or s3c2440 serial
+ * port information
+*/
+
+/* cpu specific variations on the serial port support */
+
+#ifdef CONFIG_CPU_S3C2400
+
+static int s3c2400_serial_getsource(struct uart_port *port,
+ struct s3c24xx_uart_clksrc *clk)
+{
+ clk->divisor = 1;
+ clk->name = "pclk";
+
+ return 0;
+}
+
+static int s3c2400_serial_setsource(struct uart_port *port,
+ struct s3c24xx_uart_clksrc *clk)
+{
+ return 0;
+}
+
+static int s3c2400_serial_resetport(struct uart_port *port,
+ struct s3c2410_uartcfg *cfg)
+{
+ dbg("s3c2400_serial_resetport: port=%p (%08lx), cfg=%p\n",
+ port, port->mapbase, cfg);
+
+ wr_regl(port, S3C2410_UCON, cfg->ucon);
+ wr_regl(port, S3C2410_ULCON, cfg->ulcon);
+
+ /* reset both fifos */
+
+ wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+ wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+ return 0;
+}
+
+static struct s3c24xx_uart_info s3c2400_uart_inf = {
+ .name = "Samsung S3C2400 UART",
+ .type = PORT_S3C2400,
+ .fifosize = 16,
+ .rx_fifomask = S3C2410_UFSTAT_RXMASK,
+ .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT,
+ .rx_fifofull = S3C2410_UFSTAT_RXFULL,
+ .tx_fifofull = S3C2410_UFSTAT_TXFULL,
+ .tx_fifomask = S3C2410_UFSTAT_TXMASK,
+ .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT,
+ .get_clksrc = s3c2400_serial_getsource,
+ .set_clksrc = s3c2400_serial_setsource,
+ .reset_port = s3c2400_serial_resetport,
+};
+
+static int s3c2400_serial_probe(struct device *dev)
+{
+ return s3c24xx_serial_probe(dev, &s3c2400_uart_inf);
+}
+
+static struct device_driver s3c2400_serial_drv = {
+ .name = "s3c2400-uart",
+ .bus = &platform_bus_type,
+ .probe = s3c2400_serial_probe,
+ .remove = s3c24xx_serial_remove,
+ .suspend = s3c24xx_serial_suspend,
+ .resume = s3c24xx_serial_resume,
+};
+
+static inline int s3c2400_serial_init(void)
+{
+ return s3c24xx_serial_init(&s3c2400_serial_drv, &s3c2400_uart_inf);
+}
+
+static inline void s3c2400_serial_exit(void)
+{
+ driver_unregister(&s3c2400_serial_drv);
+}
+
+#define s3c2400_uart_inf_at &s3c2400_uart_inf
+#else
+
+static inline int s3c2400_serial_init(void)
+{
+ return 0;
+}
+
+static inline void s3c2400_serial_exit(void)
+{
+}
+
+#define s3c2400_uart_inf_at NULL
+
+#endif /* CONFIG_CPU_S3C2400 */
+
+/* S3C2410 support */
+
+#ifdef CONFIG_CPU_S3C2410
+
+static int s3c2410_serial_setsource(struct uart_port *port,
+ struct s3c24xx_uart_clksrc *clk)
+{
+ unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+ if (strcmp(clk->name, "uclk") == 0)
+ ucon |= S3C2410_UCON_UCLK;
+ else
+ ucon &= ~S3C2410_UCON_UCLK;
+
+ wr_regl(port, S3C2410_UCON, ucon);
+ return 0;
+}
+
+static int s3c2410_serial_getsource(struct uart_port *port,
+ struct s3c24xx_uart_clksrc *clk)
+{
+ unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+ clk->divisor = 1;
+ clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk";
+
+ return 0;
+}
+
+static int s3c2410_serial_resetport(struct uart_port *port,
+ struct s3c2410_uartcfg *cfg)
+{
+ dbg("s3c2410_serial_resetport: port=%p (%08lx), cfg=%p\n",
+ port, port->mapbase, cfg);
+
+ wr_regl(port, S3C2410_UCON, cfg->ucon);
+ wr_regl(port, S3C2410_ULCON, cfg->ulcon);
+
+ /* reset both fifos */
+
+ wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+ wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+ return 0;
+}
+
+static struct s3c24xx_uart_info s3c2410_uart_inf = {
+ .name = "Samsung S3C2410 UART",
+ .type = PORT_S3C2410,
+ .fifosize = 16,
+ .rx_fifomask = S3C2410_UFSTAT_RXMASK,
+ .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT,
+ .rx_fifofull = S3C2410_UFSTAT_RXFULL,
+ .tx_fifofull = S3C2410_UFSTAT_TXFULL,
+ .tx_fifomask = S3C2410_UFSTAT_TXMASK,
+ .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT,
+ .get_clksrc = s3c2410_serial_getsource,
+ .set_clksrc = s3c2410_serial_setsource,
+ .reset_port = s3c2410_serial_resetport,
+};
+
+/* device management */
+
+static int s3c2410_serial_probe(struct device *dev)
+{
+ return s3c24xx_serial_probe(dev, &s3c2410_uart_inf);
+}
+
+static struct device_driver s3c2410_serial_drv = {
+ .name = "s3c2410-uart",
+ .bus = &platform_bus_type,
+ .probe = s3c2410_serial_probe,
+ .remove = s3c24xx_serial_remove,
+ .suspend = s3c24xx_serial_suspend,
+ .resume = s3c24xx_serial_resume,
+};
+
+static inline int s3c2410_serial_init(void)
+{
+ return s3c24xx_serial_init(&s3c2410_serial_drv, &s3c2410_uart_inf);
+}
+
+static inline void s3c2410_serial_exit(void)
+{
+ driver_unregister(&s3c2410_serial_drv);
+}
+
+#define s3c2410_uart_inf_at &s3c2410_uart_inf
+#else
+
+static inline int s3c2410_serial_init(void)
+{
+ return 0;
+}
+
+static inline void s3c2410_serial_exit(void)
+{
+}
+
+#define s3c2410_uart_inf_at NULL
+
+#endif /* CONFIG_CPU_S3C2410 */
+
+#ifdef CONFIG_CPU_S3C2440
+
+static int s3c2440_serial_setsource(struct uart_port *port,
+ struct s3c24xx_uart_clksrc *clk)
+{
+ unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+ // todo - proper fclk<>nonfclk switch //
+
+ ucon &= ~S3C2440_UCON_CLKMASK;
+
+ if (strcmp(clk->name, "uclk") == 0)
+ ucon |= S3C2440_UCON_UCLK;
+ else if (strcmp(clk->name, "pclk") == 0)
+ ucon |= S3C2440_UCON_PCLK;
+ else if (strcmp(clk->name, "fclk") == 0)
+ ucon |= S3C2440_UCON_FCLK;
+ else {
+ printk(KERN_ERR "unknown clock source %s\n", clk->name);
+ return -EINVAL;
+ }
+
+ wr_regl(port, S3C2410_UCON, ucon);
+ return 0;
+}
+
+
+static int s3c2440_serial_getsource(struct uart_port *port,
+ struct s3c24xx_uart_clksrc *clk)
+{
+ unsigned long ucon = rd_regl(port, S3C2410_UCON);
+ unsigned long ucon0, ucon1, ucon2;
+
+ switch (ucon & S3C2440_UCON_CLKMASK) {
+ case S3C2440_UCON_UCLK:
+ clk->divisor = 1;
+ clk->name = "uclk";
+ break;
+
+ case S3C2440_UCON_PCLK:
+ case S3C2440_UCON_PCLK2:
+ clk->divisor = 1;
+ clk->name = "pclk";
+ break;
+
+ case S3C2440_UCON_FCLK:
+ /* the fun of calculating the uart divisors on
+ * the s3c2440 */
+
+ ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON);
+ ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON);
+ ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON);
+
+ printk("ucons: %08lx, %08lx, %08lx\n", ucon0, ucon1, ucon2);
+
+ ucon0 &= S3C2440_UCON0_DIVMASK;
+ ucon1 &= S3C2440_UCON1_DIVMASK;
+ ucon2 &= S3C2440_UCON2_DIVMASK;
+
+ if (ucon0 != 0) {
+ clk->divisor = ucon0 >> S3C2440_UCON_DIVSHIFT;
+ clk->divisor += 6;
+ } else if (ucon1 != 0) {
+ clk->divisor = ucon1 >> S3C2440_UCON_DIVSHIFT;
+ clk->divisor += 21;
+ } else if (ucon2 != 0) {
+ clk->divisor = ucon2 >> S3C2440_UCON_DIVSHIFT;
+ clk->divisor += 36;
+ } else {
+ /* manual calims 44, seems to be 9 */
+ clk->divisor = 9;
+ }
+
+ clk->name = "fclk";
+ break;
+ }
+
+ return 0;
+}
+
+static int s3c2440_serial_resetport(struct uart_port *port,
+ struct s3c2410_uartcfg *cfg)
+{
+ unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+ dbg("s3c2440_serial_resetport: port=%p (%08lx), cfg=%p\n",
+ port, port->mapbase, cfg);
+
+ /* ensure we don't change the clock settings... */
+
+ ucon &= (S3C2440_UCON0_DIVMASK | (3<<10));
+
+ wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
+ wr_regl(port, S3C2410_ULCON, cfg->ulcon);
+
+ /* reset both fifos */
+
+ wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+ wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+ return 0;
+}
+
+static struct s3c24xx_uart_info s3c2440_uart_inf = {
+ .name = "Samsung S3C2440 UART",
+ .type = PORT_S3C2440,
+ .fifosize = 64,
+ .rx_fifomask = S3C2440_UFSTAT_RXMASK,
+ .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
+ .rx_fifofull = S3C2440_UFSTAT_RXFULL,
+ .tx_fifofull = S3C2440_UFSTAT_TXFULL,
+ .tx_fifomask = S3C2440_UFSTAT_TXMASK,
+ .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
+ .get_clksrc = s3c2440_serial_getsource,
+ .set_clksrc = s3c2440_serial_setsource,
+ .reset_port = s3c2440_serial_resetport,
+};
+
+/* device management */
+
+static int s3c2440_serial_probe(struct device *dev)
+{
+ dbg("s3c2440_serial_probe: dev=%p\n", dev);
+ return s3c24xx_serial_probe(dev, &s3c2440_uart_inf);
+}
+
+static struct device_driver s3c2440_serial_drv = {
+ .name = "s3c2440-uart",
+ .bus = &platform_bus_type,
+ .probe = s3c2440_serial_probe,
+ .remove = s3c24xx_serial_remove,
+ .suspend = s3c24xx_serial_suspend,
+ .resume = s3c24xx_serial_resume,
+};
+
+
+static inline int s3c2440_serial_init(void)
+{
+ return s3c24xx_serial_init(&s3c2440_serial_drv, &s3c2440_uart_inf);
+}
+
+static inline void s3c2440_serial_exit(void)
+{
+ driver_unregister(&s3c2440_serial_drv);
+}
+
+#define s3c2440_uart_inf_at &s3c2440_uart_inf
+#else
+
+static inline int s3c2440_serial_init(void)
+{
+ return 0;
+}
+
+static inline void s3c2440_serial_exit(void)
+{
+}
+
+#define s3c2440_uart_inf_at NULL
+#endif /* CONFIG_CPU_S3C2440 */
+
+/* module initialisation code */
+
+static int __init s3c24xx_serial_modinit(void)
+{
+ int ret;
+
+ ret = uart_register_driver(&s3c24xx_uart_drv);
+ if (ret < 0) {
+ printk(KERN_ERR "failed to register UART driver\n");
+ return -1;
+ }
+
+ s3c2400_serial_init();
+ s3c2410_serial_init();
+ s3c2440_serial_init();
+
+ return 0;
+}
+
+static void __exit s3c24xx_serial_modexit(void)
+{
+ s3c2400_serial_exit();
+ s3c2410_serial_exit();
+ s3c2440_serial_exit();
+
+ uart_unregister_driver(&s3c24xx_uart_drv);
+}
+
+
+module_init(s3c24xx_serial_modinit);
+module_exit(s3c24xx_serial_modexit);
+
+/* Console code */
+
+#ifdef CONFIG_SERIAL_S3C2410_CONSOLE
+
+static struct uart_port *cons_uart;
+
+static int
+s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
+{
+ struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+ unsigned long ufstat, utrstat;
+
+ if (ufcon & S3C2410_UFCON_FIFOMODE) {
+ /* fifo mode - check ammount of data in fifo registers... */
+
+ ufstat = rd_regl(port, S3C2410_UFSTAT);
+ return (ufstat & info->tx_fifofull) ? 0 : 1;
+ }
+
+ /* in non-fifo mode, we go and use the tx buffer empty */
+
+ utrstat = rd_regl(port, S3C2410_UTRSTAT);
+ return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0;
+}
+
+static void
+s3c24xx_serial_console_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ int i;
+ unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
+
+ for (i = 0; i < count; i++) {
+ while (!s3c24xx_serial_console_txrdy(cons_uart, ufcon))
+ barrier();
+
+ wr_regb(cons_uart, S3C2410_UTXH, s[i]);
+
+ if (s[i] == '\n') {
+ while (!s3c24xx_serial_console_txrdy(cons_uart, ufcon))
+ barrier();
+
+ wr_regb(cons_uart, S3C2410_UTXH, '\r');
+ }
+ }
+}
+
+static void __init
+s3c24xx_serial_get_options(struct uart_port *port, int *baud,
+ int *parity, int *bits)
+{
+ struct s3c24xx_uart_clksrc clksrc;
+ struct clk *clk;
+ unsigned int ulcon;
+ unsigned int ucon;
+ unsigned int ubrdiv;
+ unsigned long rate;
+
+ ulcon = rd_regl(port, S3C2410_ULCON);
+ ucon = rd_regl(port, S3C2410_UCON);
+ ubrdiv = rd_regl(port, S3C2410_UBRDIV);
+
+ dbg("s3c24xx_serial_get_options: port=%p\n"
+ "registers: ulcon=%08x, ucon=%08x, ubdriv=%08x\n",
+ port, ulcon, ucon, ubrdiv);
+
+ if ((ucon & 0xf) != 0) {
+ /* consider the serial port configured if the tx/rx mode set */
+
+ switch (ulcon & S3C2410_LCON_CSMASK) {
+ case S3C2410_LCON_CS5:
+ *bits = 5;
+ break;
+ case S3C2410_LCON_CS6:
+ *bits = 6;
+ break;
+ case S3C2410_LCON_CS7:
+ *bits = 7;
+ break;
+ default:
+ case S3C2410_LCON_CS8:
+ *bits = 8;
+ break;
+ }
+
+ switch (ulcon & S3C2410_LCON_PMASK) {
+ case S3C2410_LCON_PEVEN:
+ *parity = 'e';
+ break;
+
+ case S3C2410_LCON_PODD:
+ *parity = 'o';
+ break;
+
+ case S3C2410_LCON_PNONE:
+ default:
+ *parity = 'n';
+ }
+
+ /* now calculate the baud rate */
+
+ s3c24xx_serial_getsource(port, &clksrc);
+
+ clk = clk_get(port->dev, clksrc.name);
+ if (!IS_ERR(clk) && clk != NULL)
+ rate = clk_get_rate(clk) / clksrc.divisor;
+ else
+ rate = 1;
+
+
+ *baud = rate / ( 16 * (ubrdiv + 1));
+ dbg("calculated baud %d\n", *baud);
+ }
+
+}
+
+/* s3c24xx_serial_init_ports
+ *
+ * initialise the serial ports from the machine provided initialisation
+ * data.
+*/
+
+static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info)
+{
+ struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports;
+ struct platform_device **platdev_ptr;
+ int i;
+
+ dbg("s3c24xx_serial_init_ports: initialising ports...\n");
+
+ platdev_ptr = s3c24xx_uart_devs;
+
+ for (i = 0; i < NR_PORTS; i++, ptr++, platdev_ptr++) {
+ s3c24xx_serial_init_port(ptr, info, *platdev_ptr);
+ }
+
+ return 0;
+}
+
+static int __init
+s3c24xx_serial_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ dbg("s3c24xx_serial_console_setup: co=%p (%d), %s\n",
+ co, co->index, options);
+
+ /* is this a valid port */
+
+ if (co->index == -1 || co->index >= NR_PORTS)
+ co->index = 0;
+
+ port = &s3c24xx_serial_ports[co->index].port;
+
+ /* is the port configured? */
+
+ if (port->mapbase == 0x0) {
+ co->index = 0;
+ port = &s3c24xx_serial_ports[co->index].port;
+ }
+
+ cons_uart = port;
+
+ dbg("s3c24xx_serial_console_setup: port=%p (%d)\n", port, co->index);
+
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ else
+ s3c24xx_serial_get_options(port, &baud, &parity, &bits);
+
+ dbg("s3c24xx_serial_console_setup: baud %d\n", baud);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+/* s3c24xx_serial_initconsole
+ *
+ * initialise the console from one of the uart drivers
+*/
+
+static struct console s3c24xx_serial_console =
+{
+ .name = S3C24XX_SERIAL_NAME,
+ .device = uart_console_device,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .write = s3c24xx_serial_console_write,
+ .setup = s3c24xx_serial_console_setup
+};
+
+static int s3c24xx_serial_initconsole(void)
+{
+ struct s3c24xx_uart_info *info;
+ struct platform_device *dev = s3c24xx_uart_devs[0];
+
+ dbg("s3c24xx_serial_initconsole\n");
+
+ /* select driver based on the cpu */
+
+ if (dev == NULL) {
+ printk(KERN_ERR "s3c24xx: no devices for console init\n");
+ return 0;
+ }
+
+ if (strcmp(dev->name, "s3c2400-uart") == 0) {
+ info = s3c2400_uart_inf_at;
+ } else if (strcmp(dev->name, "s3c2410-uart") == 0) {
+ info = s3c2410_uart_inf_at;
+ } else if (strcmp(dev->name, "s3c2440-uart") == 0) {
+ info = s3c2440_uart_inf_at;
+ } else {
+ printk(KERN_ERR "s3c24xx: no driver for %s\n", dev->name);
+ return 0;
+ }
+
+ if (info == NULL) {
+ printk(KERN_ERR "s3c24xx: no driver for console\n");
+ return 0;
+ }
+
+ s3c24xx_serial_console.data = &s3c24xx_uart_drv;
+ s3c24xx_serial_init_ports(info);
+
+ register_console(&s3c24xx_serial_console);
+ return 0;
+}
+
+console_initcall(s3c24xx_serial_initconsole);
+
+#endif /* CONFIG_SERIAL_S3C2410_CONSOLE */
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("Samsung S3C2410/S3C2440 Serial port driver");
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
new file mode 100644
index 00000000000..85f0af452f9
--- /dev/null
+++ b/drivers/serial/sa1100.c
@@ -0,0 +1,952 @@
+/*
+ * linux/drivers/char/sa1100.c
+ *
+ * Driver for SA11x0 serial ports
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * $Id: sa1100.c,v 1.50 2002/07/29 14:41:04 rmk Exp $
+ *
+ */
+#include <linux/config.h>
+
+#if defined(CONFIG_SERIAL_SA1100_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/mach/serial_sa1100.h>
+
+/* We've been assigned a range on the "Low-density serial ports" major */
+#define SERIAL_SA1100_MAJOR 204
+#define MINOR_START 5
+
+#define NR_PORTS 3
+
+#define SA1100_ISR_PASS_LIMIT 256
+
+/*
+ * Convert from ignore_status_mask or read_status_mask to UTSR[01]
+ */
+#define SM_TO_UTSR0(x) ((x) & 0xff)
+#define SM_TO_UTSR1(x) ((x) >> 8)
+#define UTSR0_TO_SM(x) ((x))
+#define UTSR1_TO_SM(x) ((x) << 8)
+
+#define UART_GET_UTCR0(sport) __raw_readl((sport)->port.membase + UTCR0)
+#define UART_GET_UTCR1(sport) __raw_readl((sport)->port.membase + UTCR1)
+#define UART_GET_UTCR2(sport) __raw_readl((sport)->port.membase + UTCR2)
+#define UART_GET_UTCR3(sport) __raw_readl((sport)->port.membase + UTCR3)
+#define UART_GET_UTSR0(sport) __raw_readl((sport)->port.membase + UTSR0)
+#define UART_GET_UTSR1(sport) __raw_readl((sport)->port.membase + UTSR1)
+#define UART_GET_CHAR(sport) __raw_readl((sport)->port.membase + UTDR)
+
+#define UART_PUT_UTCR0(sport,v) __raw_writel((v),(sport)->port.membase + UTCR0)
+#define UART_PUT_UTCR1(sport,v) __raw_writel((v),(sport)->port.membase + UTCR1)
+#define UART_PUT_UTCR2(sport,v) __raw_writel((v),(sport)->port.membase + UTCR2)
+#define UART_PUT_UTCR3(sport,v) __raw_writel((v),(sport)->port.membase + UTCR3)
+#define UART_PUT_UTSR0(sport,v) __raw_writel((v),(sport)->port.membase + UTSR0)
+#define UART_PUT_UTSR1(sport,v) __raw_writel((v),(sport)->port.membase + UTSR1)
+#define UART_PUT_CHAR(sport,v) __raw_writel((v),(sport)->port.membase + UTDR)
+
+/*
+ * This is the size of our serial port register set.
+ */
+#define UART_PORT_SIZE 0x24
+
+/*
+ * This determines how often we check the modem status signals
+ * for any change. They generally aren't connected to an IRQ
+ * so we have to poll them. We also check immediately before
+ * filling the TX fifo incase CTS has been dropped.
+ */
+#define MCTRL_TIMEOUT (250*HZ/1000)
+
+struct sa1100_port {
+ struct uart_port port;
+ struct timer_list timer;
+ unsigned int old_status;
+};
+
+/*
+ * Handle any change of modem status signal since we were last called.
+ */
+static void sa1100_mctrl_check(struct sa1100_port *sport)
+{
+ unsigned int status, changed;
+
+ status = sport->port.ops->get_mctrl(&sport->port);
+ changed = status ^ sport->old_status;
+
+ if (changed == 0)
+ return;
+
+ sport->old_status = status;
+
+ if (changed & TIOCM_RI)
+ sport->port.icount.rng++;
+ if (changed & TIOCM_DSR)
+ sport->port.icount.dsr++;
+ if (changed & TIOCM_CAR)
+ uart_handle_dcd_change(&sport->port, status & TIOCM_CAR);
+ if (changed & TIOCM_CTS)
+ uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
+
+ wake_up_interruptible(&sport->port.info->delta_msr_wait);
+}
+
+/*
+ * This is our per-port timeout handler, for checking the
+ * modem status signals.
+ */
+static void sa1100_timeout(unsigned long data)
+{
+ struct sa1100_port *sport = (struct sa1100_port *)data;
+ unsigned long flags;
+
+ if (sport->port.info) {
+ spin_lock_irqsave(&sport->port.lock, flags);
+ sa1100_mctrl_check(sport);
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+
+ mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT);
+ }
+}
+
+/*
+ * interrupts disabled on entry
+ */
+static void sa1100_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ struct sa1100_port *sport = (struct sa1100_port *)port;
+ u32 utcr3;
+
+ utcr3 = UART_GET_UTCR3(sport);
+ UART_PUT_UTCR3(sport, utcr3 & ~UTCR3_TIE);
+ sport->port.read_status_mask &= ~UTSR0_TO_SM(UTSR0_TFS);
+}
+
+/*
+ * interrupts may not be disabled on entry
+ */
+static void sa1100_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+ struct sa1100_port *sport = (struct sa1100_port *)port;
+ unsigned long flags;
+ u32 utcr3;
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+ utcr3 = UART_GET_UTCR3(sport);
+ sport->port.read_status_mask |= UTSR0_TO_SM(UTSR0_TFS);
+ UART_PUT_UTCR3(sport, utcr3 | UTCR3_TIE);
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+}
+
+/*
+ * Interrupts enabled
+ */
+static void sa1100_stop_rx(struct uart_port *port)
+{
+ struct sa1100_port *sport = (struct sa1100_port *)port;
+ u32 utcr3;
+
+ utcr3 = UART_GET_UTCR3(sport);
+ UART_PUT_UTCR3(sport, utcr3 & ~UTCR3_RIE);
+}
+
+/*
+ * Set the modem control timer to fire immediately.
+ */
+static void sa1100_enable_ms(struct uart_port *port)
+{
+ struct sa1100_port *sport = (struct sa1100_port *)port;
+
+ mod_timer(&sport->timer, jiffies);
+}
+
+static void
+sa1100_rx_chars(struct sa1100_port *sport, struct pt_regs *regs)
+{
+ struct tty_struct *tty = sport->port.info->tty;
+ unsigned int status, ch, flg, ignored = 0;
+
+ status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) |
+ UTSR0_TO_SM(UART_GET_UTSR0(sport));
+ while (status & UTSR1_TO_SM(UTSR1_RNE)) {
+ ch = UART_GET_CHAR(sport);
+
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+ goto ignore_char;
+ sport->port.icount.rx++;
+
+ flg = TTY_NORMAL;
+
+ /*
+ * note that the error handling code is
+ * out of the main execution path
+ */
+ if (status & UTSR1_TO_SM(UTSR1_PRE | UTSR1_FRE | UTSR1_ROR))
+ goto handle_error;
+
+ if (uart_handle_sysrq_char(&sport->port, ch, regs))
+ goto ignore_char;
+
+ error_return:
+ tty_insert_flip_char(tty, ch, flg);
+ ignore_char:
+ status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) |
+ UTSR0_TO_SM(UART_GET_UTSR0(sport));
+ }
+ out:
+ tty_flip_buffer_push(tty);
+ return;
+
+ handle_error:
+ if (status & UTSR1_TO_SM(UTSR1_PRE))
+ sport->port.icount.parity++;
+ else if (status & UTSR1_TO_SM(UTSR1_FRE))
+ sport->port.icount.frame++;
+ if (status & UTSR1_TO_SM(UTSR1_ROR))
+ sport->port.icount.overrun++;
+
+ if (status & sport->port.ignore_status_mask) {
+ if (++ignored > 100)
+ goto out;
+ goto ignore_char;
+ }
+
+ status &= sport->port.read_status_mask;
+
+ if (status & UTSR1_TO_SM(UTSR1_PRE))
+ flg = TTY_PARITY;
+ else if (status & UTSR1_TO_SM(UTSR1_FRE))
+ flg = TTY_FRAME;
+
+ if (status & UTSR1_TO_SM(UTSR1_ROR)) {
+ /*
+ * overrun does *not* affect the character
+ * we read from the FIFO
+ */
+ tty_insert_flip_char(tty, ch, flg);
+ ch = 0;
+ flg = TTY_OVERRUN;
+ }
+#ifdef SUPPORT_SYSRQ
+ sport->port.sysrq = 0;
+#endif
+ goto error_return;
+}
+
+static void sa1100_tx_chars(struct sa1100_port *sport)
+{
+ struct circ_buf *xmit = &sport->port.info->xmit;
+
+ if (sport->port.x_char) {
+ UART_PUT_CHAR(sport, sport->port.x_char);
+ sport->port.icount.tx++;
+ sport->port.x_char = 0;
+ return;
+ }
+
+ /*
+ * Check the modem control lines before
+ * transmitting anything.
+ */
+ sa1100_mctrl_check(sport);
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
+ sa1100_stop_tx(&sport->port, 0);
+ return;
+ }
+
+ /*
+ * Tried using FIFO (not checking TNF) for fifo fill:
+ * still had the '4 bytes repeated' problem.
+ */
+ while (UART_GET_UTSR1(sport) & UTSR1_TNF) {
+ UART_PUT_CHAR(sport, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ sport->port.icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&sport->port);
+
+ if (uart_circ_empty(xmit))
+ sa1100_stop_tx(&sport->port, 0);
+}
+
+static irqreturn_t sa1100_int(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct sa1100_port *sport = dev_id;
+ unsigned int status, pass_counter = 0;
+
+ spin_lock(&sport->port.lock);
+ status = UART_GET_UTSR0(sport);
+ status &= SM_TO_UTSR0(sport->port.read_status_mask) | ~UTSR0_TFS;
+ do {
+ if (status & (UTSR0_RFS | UTSR0_RID)) {
+ /* Clear the receiver idle bit, if set */
+ if (status & UTSR0_RID)
+ UART_PUT_UTSR0(sport, UTSR0_RID);
+ sa1100_rx_chars(sport, regs);
+ }
+
+ /* Clear the relevant break bits */
+ if (status & (UTSR0_RBB | UTSR0_REB))
+ UART_PUT_UTSR0(sport, status & (UTSR0_RBB | UTSR0_REB));
+
+ if (status & UTSR0_RBB)
+ sport->port.icount.brk++;
+
+ if (status & UTSR0_REB)
+ uart_handle_break(&sport->port);
+
+ if (status & UTSR0_TFS)
+ sa1100_tx_chars(sport);
+ if (pass_counter++ > SA1100_ISR_PASS_LIMIT)
+ break;
+ status = UART_GET_UTSR0(sport);
+ status &= SM_TO_UTSR0(sport->port.read_status_mask) |
+ ~UTSR0_TFS;
+ } while (status & (UTSR0_TFS | UTSR0_RFS | UTSR0_RID));
+ spin_unlock(&sport->port.lock);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Return TIOCSER_TEMT when transmitter is not busy.
+ */
+static unsigned int sa1100_tx_empty(struct uart_port *port)
+{
+ struct sa1100_port *sport = (struct sa1100_port *)port;
+
+ return UART_GET_UTSR1(sport) & UTSR1_TBY ? 0 : TIOCSER_TEMT;
+}
+
+static unsigned int sa1100_get_mctrl(struct uart_port *port)
+{
+ return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+}
+
+static void sa1100_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+/*
+ * Interrupts always disabled.
+ */
+static void sa1100_break_ctl(struct uart_port *port, int break_state)
+{
+ struct sa1100_port *sport = (struct sa1100_port *)port;
+ unsigned long flags;
+ unsigned int utcr3;
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+ utcr3 = UART_GET_UTCR3(sport);
+ if (break_state == -1)
+ utcr3 |= UTCR3_BRK;
+ else
+ utcr3 &= ~UTCR3_BRK;
+ UART_PUT_UTCR3(sport, utcr3);
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+}
+
+static int sa1100_startup(struct uart_port *port)
+{
+ struct sa1100_port *sport = (struct sa1100_port *)port;
+ int retval;
+
+ /*
+ * Allocate the IRQ
+ */
+ retval = request_irq(sport->port.irq, sa1100_int, 0,
+ "sa11x0-uart", sport);
+ if (retval)
+ return retval;
+
+ /*
+ * Finally, clear and enable interrupts
+ */
+ UART_PUT_UTSR0(sport, -1);
+ UART_PUT_UTCR3(sport, UTCR3_RXE | UTCR3_TXE | UTCR3_RIE);
+
+ /*
+ * Enable modem status interrupts
+ */
+ spin_lock_irq(&sport->port.lock);
+ sa1100_enable_ms(&sport->port);
+ spin_unlock_irq(&sport->port.lock);
+
+ return 0;
+}
+
+static void sa1100_shutdown(struct uart_port *port)
+{
+ struct sa1100_port *sport = (struct sa1100_port *)port;
+
+ /*
+ * Stop our timer.
+ */
+ del_timer_sync(&sport->timer);
+
+ /*
+ * Free the interrupt
+ */
+ free_irq(sport->port.irq, sport);
+
+ /*
+ * Disable all interrupts, port and break condition.
+ */
+ UART_PUT_UTCR3(sport, 0);
+}
+
+static void
+sa1100_set_termios(struct uart_port *port, struct termios *termios,
+ struct termios *old)
+{
+ struct sa1100_port *sport = (struct sa1100_port *)port;
+ unsigned long flags;
+ unsigned int utcr0, old_utcr3, baud, quot;
+ unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
+
+ /*
+ * We only support CS7 and CS8.
+ */
+ while ((termios->c_cflag & CSIZE) != CS7 &&
+ (termios->c_cflag & CSIZE) != CS8) {
+ termios->c_cflag &= ~CSIZE;
+ termios->c_cflag |= old_csize;
+ old_csize = CS8;
+ }
+
+ if ((termios->c_cflag & CSIZE) == CS8)
+ utcr0 = UTCR0_DSS;
+ else
+ utcr0 = 0;
+
+ if (termios->c_cflag & CSTOPB)
+ utcr0 |= UTCR0_SBS;
+ if (termios->c_cflag & PARENB) {
+ utcr0 |= UTCR0_PE;
+ if (!(termios->c_cflag & PARODD))
+ utcr0 |= UTCR0_OES;
+ }
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ quot = uart_get_divisor(port, baud);
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+
+ sport->port.read_status_mask &= UTSR0_TO_SM(UTSR0_TFS);
+ sport->port.read_status_mask |= UTSR1_TO_SM(UTSR1_ROR);
+ if (termios->c_iflag & INPCK)
+ sport->port.read_status_mask |=
+ UTSR1_TO_SM(UTSR1_FRE | UTSR1_PRE);
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ sport->port.read_status_mask |=
+ UTSR0_TO_SM(UTSR0_RBB | UTSR0_REB);
+
+ /*
+ * Characters to ignore
+ */
+ sport->port.ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ sport->port.ignore_status_mask |=
+ UTSR1_TO_SM(UTSR1_FRE | UTSR1_PRE);
+ if (termios->c_iflag & IGNBRK) {
+ sport->port.ignore_status_mask |=
+ UTSR0_TO_SM(UTSR0_RBB | UTSR0_REB);
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ sport->port.ignore_status_mask |=
+ UTSR1_TO_SM(UTSR1_ROR);
+ }
+
+ del_timer_sync(&sport->timer);
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ /*
+ * disable interrupts and drain transmitter
+ */
+ old_utcr3 = UART_GET_UTCR3(sport);
+ UART_PUT_UTCR3(sport, old_utcr3 & ~(UTCR3_RIE | UTCR3_TIE));
+
+ while (UART_GET_UTSR1(sport) & UTSR1_TBY)
+ barrier();
+
+ /* then, disable everything */
+ UART_PUT_UTCR3(sport, 0);
+
+ /* set the parity, stop bits and data size */
+ UART_PUT_UTCR0(sport, utcr0);
+
+ /* set the baud rate */
+ quot -= 1;
+ UART_PUT_UTCR1(sport, ((quot & 0xf00) >> 8));
+ UART_PUT_UTCR2(sport, (quot & 0xff));
+
+ UART_PUT_UTSR0(sport, -1);
+
+ UART_PUT_UTCR3(sport, old_utcr3);
+
+ if (UART_ENABLE_MS(&sport->port, termios->c_cflag))
+ sa1100_enable_ms(&sport->port);
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+}
+
+static const char *sa1100_type(struct uart_port *port)
+{
+ struct sa1100_port *sport = (struct sa1100_port *)port;
+
+ return sport->port.type == PORT_SA1100 ? "SA1100" : NULL;
+}
+
+/*
+ * Release the memory region(s) being used by 'port'.
+ */
+static void sa1100_release_port(struct uart_port *port)
+{
+ struct sa1100_port *sport = (struct sa1100_port *)port;
+
+ release_mem_region(sport->port.mapbase, UART_PORT_SIZE);
+}
+
+/*
+ * Request the memory region(s) being used by 'port'.
+ */
+static int sa1100_request_port(struct uart_port *port)
+{
+ struct sa1100_port *sport = (struct sa1100_port *)port;
+
+ return request_mem_region(sport->port.mapbase, UART_PORT_SIZE,
+ "sa11x0-uart") != NULL ? 0 : -EBUSY;
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void sa1100_config_port(struct uart_port *port, int flags)
+{
+ struct sa1100_port *sport = (struct sa1100_port *)port;
+
+ if (flags & UART_CONFIG_TYPE &&
+ sa1100_request_port(&sport->port) == 0)
+ sport->port.type = PORT_SA1100;
+}
+
+/*
+ * Verify the new serial_struct (for TIOCSSERIAL).
+ * The only change we allow are to the flags and type, and
+ * even then only between PORT_SA1100 and PORT_UNKNOWN
+ */
+static int
+sa1100_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ struct sa1100_port *sport = (struct sa1100_port *)port;
+ int ret = 0;
+
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_SA1100)
+ ret = -EINVAL;
+ if (sport->port.irq != ser->irq)
+ ret = -EINVAL;
+ if (ser->io_type != SERIAL_IO_MEM)
+ ret = -EINVAL;
+ if (sport->port.uartclk / 16 != ser->baud_base)
+ ret = -EINVAL;
+ if ((void *)sport->port.mapbase != ser->iomem_base)
+ ret = -EINVAL;
+ if (sport->port.iobase != ser->port)
+ ret = -EINVAL;
+ if (ser->hub6 != 0)
+ ret = -EINVAL;
+ return ret;
+}
+
+static struct uart_ops sa1100_pops = {
+ .tx_empty = sa1100_tx_empty,
+ .set_mctrl = sa1100_set_mctrl,
+ .get_mctrl = sa1100_get_mctrl,
+ .stop_tx = sa1100_stop_tx,
+ .start_tx = sa1100_start_tx,
+ .stop_rx = sa1100_stop_rx,
+ .enable_ms = sa1100_enable_ms,
+ .break_ctl = sa1100_break_ctl,
+ .startup = sa1100_startup,
+ .shutdown = sa1100_shutdown,
+ .set_termios = sa1100_set_termios,
+ .type = sa1100_type,
+ .release_port = sa1100_release_port,
+ .request_port = sa1100_request_port,
+ .config_port = sa1100_config_port,
+ .verify_port = sa1100_verify_port,
+};
+
+static struct sa1100_port sa1100_ports[NR_PORTS];
+
+/*
+ * Setup the SA1100 serial ports. Note that we don't include the IrDA
+ * port here since we have our own SIR/FIR driver (see drivers/net/irda)
+ *
+ * Note also that we support "console=ttySAx" where "x" is either 0 or 1.
+ * Which serial port this ends up being depends on the machine you're
+ * running this kernel on. I'm not convinced that this is a good idea,
+ * but that's the way it traditionally works.
+ *
+ * Note that NanoEngine UART3 becomes UART2, and UART2 is no longer
+ * used here.
+ */
+static void __init sa1100_init_ports(void)
+{
+ static int first = 1;
+ int i;
+
+ if (!first)
+ return;
+ first = 0;
+
+ for (i = 0; i < NR_PORTS; i++) {
+ sa1100_ports[i].port.uartclk = 3686400;
+ sa1100_ports[i].port.ops = &sa1100_pops;
+ sa1100_ports[i].port.fifosize = 8;
+ sa1100_ports[i].port.line = i;
+ sa1100_ports[i].port.iotype = SERIAL_IO_MEM;
+ init_timer(&sa1100_ports[i].timer);
+ sa1100_ports[i].timer.function = sa1100_timeout;
+ sa1100_ports[i].timer.data = (unsigned long)&sa1100_ports[i];
+ }
+
+ /*
+ * make transmit lines outputs, so that when the port
+ * is closed, the output is in the MARK state.
+ */
+ PPDR |= PPC_TXD1 | PPC_TXD3;
+ PPSR |= PPC_TXD1 | PPC_TXD3;
+}
+
+void __init sa1100_register_uart_fns(struct sa1100_port_fns *fns)
+{
+ if (fns->get_mctrl)
+ sa1100_pops.get_mctrl = fns->get_mctrl;
+ if (fns->set_mctrl)
+ sa1100_pops.set_mctrl = fns->set_mctrl;
+
+ sa1100_pops.pm = fns->pm;
+ sa1100_pops.set_wake = fns->set_wake;
+}
+
+void __init sa1100_register_uart(int idx, int port)
+{
+ if (idx >= NR_PORTS) {
+ printk(KERN_ERR "%s: bad index number %d\n", __FUNCTION__, idx);
+ return;
+ }
+
+ switch (port) {
+ case 1:
+ sa1100_ports[idx].port.membase = (void __iomem *)&Ser1UTCR0;
+ sa1100_ports[idx].port.mapbase = _Ser1UTCR0;
+ sa1100_ports[idx].port.irq = IRQ_Ser1UART;
+ sa1100_ports[idx].port.flags = ASYNC_BOOT_AUTOCONF;
+ break;
+
+ case 2:
+ sa1100_ports[idx].port.membase = (void __iomem *)&Ser2UTCR0;
+ sa1100_ports[idx].port.mapbase = _Ser2UTCR0;
+ sa1100_ports[idx].port.irq = IRQ_Ser2ICP;
+ sa1100_ports[idx].port.flags = ASYNC_BOOT_AUTOCONF;
+ break;
+
+ case 3:
+ sa1100_ports[idx].port.membase = (void __iomem *)&Ser3UTCR0;
+ sa1100_ports[idx].port.mapbase = _Ser3UTCR0;
+ sa1100_ports[idx].port.irq = IRQ_Ser3UART;
+ sa1100_ports[idx].port.flags = ASYNC_BOOT_AUTOCONF;
+ break;
+
+ default:
+ printk(KERN_ERR "%s: bad port number %d\n", __FUNCTION__, port);
+ }
+}
+
+
+#ifdef CONFIG_SERIAL_SA1100_CONSOLE
+
+/*
+ * Interrupts are disabled on entering
+ */
+static void
+sa1100_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct sa1100_port *sport = &sa1100_ports[co->index];
+ unsigned int old_utcr3, status, i;
+
+ /*
+ * First, save UTCR3 and then disable interrupts
+ */
+ old_utcr3 = UART_GET_UTCR3(sport);
+ UART_PUT_UTCR3(sport, (old_utcr3 & ~(UTCR3_RIE | UTCR3_TIE)) |
+ UTCR3_TXE);
+
+ /*
+ * Now, do each character
+ */
+ for (i = 0; i < count; i++) {
+ do {
+ status = UART_GET_UTSR1(sport);
+ } while (!(status & UTSR1_TNF));
+ UART_PUT_CHAR(sport, s[i]);
+ if (s[i] == '\n') {
+ do {
+ status = UART_GET_UTSR1(sport);
+ } while (!(status & UTSR1_TNF));
+ UART_PUT_CHAR(sport, '\r');
+ }
+ }
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore UTCR3
+ */
+ do {
+ status = UART_GET_UTSR1(sport);
+ } while (status & UTSR1_TBY);
+ UART_PUT_UTCR3(sport, old_utcr3);
+}
+
+/*
+ * If the port was already initialised (eg, by a boot loader),
+ * try to determine the current setup.
+ */
+static void __init
+sa1100_console_get_options(struct sa1100_port *sport, int *baud,
+ int *parity, int *bits)
+{
+ unsigned int utcr3;
+
+ utcr3 = UART_GET_UTCR3(sport) & (UTCR3_RXE | UTCR3_TXE);
+ if (utcr3 == (UTCR3_RXE | UTCR3_TXE)) {
+ /* ok, the port was enabled */
+ unsigned int utcr0, quot;
+
+ utcr0 = UART_GET_UTCR0(sport);
+
+ *parity = 'n';
+ if (utcr0 & UTCR0_PE) {
+ if (utcr0 & UTCR0_OES)
+ *parity = 'e';
+ else
+ *parity = 'o';
+ }
+
+ if (utcr0 & UTCR0_DSS)
+ *bits = 8;
+ else
+ *bits = 7;
+
+ quot = UART_GET_UTCR2(sport) | UART_GET_UTCR1(sport) << 8;
+ quot &= 0xfff;
+ *baud = sport->port.uartclk / (16 * (quot + 1));
+ }
+}
+
+static int __init
+sa1100_console_setup(struct console *co, char *options)
+{
+ struct sa1100_port *sport;
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ if (co->index == -1 || co->index >= NR_PORTS)
+ co->index = 0;
+ sport = &sa1100_ports[co->index];
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ else
+ sa1100_console_get_options(sport, &baud, &parity, &bits);
+
+ return uart_set_options(&sport->port, co, baud, parity, bits, flow);
+}
+
+extern struct uart_driver sa1100_reg;
+static struct console sa1100_console = {
+ .name = "ttySA",
+ .write = sa1100_console_write,
+ .device = uart_console_device,
+ .setup = sa1100_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &sa1100_reg,
+};
+
+static int __init sa1100_rs_console_init(void)
+{
+ sa1100_init_ports();
+ register_console(&sa1100_console);
+ return 0;
+}
+console_initcall(sa1100_rs_console_init);
+
+#define SA1100_CONSOLE &sa1100_console
+#else
+#define SA1100_CONSOLE NULL
+#endif
+
+static struct uart_driver sa1100_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "ttySA",
+ .dev_name = "ttySA",
+ .devfs_name = "ttySA",
+ .major = SERIAL_SA1100_MAJOR,
+ .minor = MINOR_START,
+ .nr = NR_PORTS,
+ .cons = SA1100_CONSOLE,
+};
+
+static int sa1100_serial_suspend(struct device *_dev, u32 state, u32 level)
+{
+ struct sa1100_port *sport = dev_get_drvdata(_dev);
+
+ if (sport && level == SUSPEND_DISABLE)
+ uart_suspend_port(&sa1100_reg, &sport->port);
+
+ return 0;
+}
+
+static int sa1100_serial_resume(struct device *_dev, u32 level)
+{
+ struct sa1100_port *sport = dev_get_drvdata(_dev);
+
+ if (sport && level == RESUME_ENABLE)
+ uart_resume_port(&sa1100_reg, &sport->port);
+
+ return 0;
+}
+
+static int sa1100_serial_probe(struct device *_dev)
+{
+ struct platform_device *dev = to_platform_device(_dev);
+ struct resource *res = dev->resource;
+ int i;
+
+ for (i = 0; i < dev->num_resources; i++, res++)
+ if (res->flags & IORESOURCE_MEM)
+ break;
+
+ if (i < dev->num_resources) {
+ for (i = 0; i < NR_PORTS; i++) {
+ if (sa1100_ports[i].port.mapbase != res->start)
+ continue;
+
+ sa1100_ports[i].port.dev = _dev;
+ uart_add_one_port(&sa1100_reg, &sa1100_ports[i].port);
+ dev_set_drvdata(_dev, &sa1100_ports[i]);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static int sa1100_serial_remove(struct device *_dev)
+{
+ struct sa1100_port *sport = dev_get_drvdata(_dev);
+
+ dev_set_drvdata(_dev, NULL);
+
+ if (sport)
+ uart_remove_one_port(&sa1100_reg, &sport->port);
+
+ return 0;
+}
+
+static struct device_driver sa11x0_serial_driver = {
+ .name = "sa11x0-uart",
+ .bus = &platform_bus_type,
+ .probe = sa1100_serial_probe,
+ .remove = sa1100_serial_remove,
+ .suspend = sa1100_serial_suspend,
+ .resume = sa1100_serial_resume,
+};
+
+static int __init sa1100_serial_init(void)
+{
+ int ret;
+
+ printk(KERN_INFO "Serial: SA11x0 driver $Revision: 1.50 $\n");
+
+ sa1100_init_ports();
+
+ ret = uart_register_driver(&sa1100_reg);
+ if (ret == 0) {
+ ret = driver_register(&sa11x0_serial_driver);
+ if (ret)
+ uart_unregister_driver(&sa1100_reg);
+ }
+ return ret;
+}
+
+static void __exit sa1100_serial_exit(void)
+{
+ driver_unregister(&sa11x0_serial_driver);
+ uart_unregister_driver(&sa1100_reg);
+}
+
+module_init(sa1100_serial_init);
+module_exit(sa1100_serial_exit);
+
+MODULE_AUTHOR("Deep Blue Solutions Ltd");
+MODULE_DESCRIPTION("SA1100 generic serial port driver $Revision: 1.50 $");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_SA1100_MAJOR);
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
new file mode 100644
index 00000000000..36b1ae083fb
--- /dev/null
+++ b/drivers/serial/serial_core.c
@@ -0,0 +1,2395 @@
+/*
+ * linux/drivers/char/core.c
+ *
+ * Driver core for serial ports
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ * Copyright 1999 ARM Limited
+ * Copyright (C) 2000-2001 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/serial_core.h>
+#include <linux/smp_lock.h>
+#include <linux/device.h>
+#include <linux/serial.h> /* for serial_state and serial_icounter_struct */
+#include <linux/delay.h>
+
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#undef DEBUG
+#ifdef DEBUG
+#define DPRINTK(x...) printk(x)
+#else
+#define DPRINTK(x...) do { } while (0)
+#endif
+
+/*
+ * This is used to lock changes in serial line configuration.
+ */
+static DECLARE_MUTEX(port_sem);
+
+#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
+
+#define uart_users(state) ((state)->count + ((state)->info ? (state)->info->blocked_open : 0))
+
+#ifdef CONFIG_SERIAL_CORE_CONSOLE
+#define uart_console(port) ((port)->cons && (port)->cons->index == (port)->line)
+#else
+#define uart_console(port) (0)
+#endif
+
+static void uart_change_speed(struct uart_state *state, struct termios *old_termios);
+static void uart_wait_until_sent(struct tty_struct *tty, int timeout);
+static void uart_change_pm(struct uart_state *state, int pm_state);
+
+/*
+ * This routine is used by the interrupt handler to schedule processing in
+ * the software interrupt portion of the driver.
+ */
+void uart_write_wakeup(struct uart_port *port)
+{
+ struct uart_info *info = port->info;
+ tasklet_schedule(&info->tlet);
+}
+
+static void uart_stop(struct tty_struct *tty)
+{
+ struct uart_state *state = tty->driver_data;
+ struct uart_port *port = state->port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ port->ops->stop_tx(port, 1);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void __uart_start(struct tty_struct *tty)
+{
+ struct uart_state *state = tty->driver_data;
+ struct uart_port *port = state->port;
+
+ if (!uart_circ_empty(&state->info->xmit) && state->info->xmit.buf &&
+ !tty->stopped && !tty->hw_stopped)
+ port->ops->start_tx(port, 1);
+}
+
+static void uart_start(struct tty_struct *tty)
+{
+ struct uart_state *state = tty->driver_data;
+ struct uart_port *port = state->port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ __uart_start(tty);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void uart_tasklet_action(unsigned long data)
+{
+ struct uart_state *state = (struct uart_state *)data;
+ tty_wakeup(state->info->tty);
+}
+
+static inline void
+uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear)
+{
+ unsigned long flags;
+ unsigned int old;
+
+ spin_lock_irqsave(&port->lock, flags);
+ old = port->mctrl;
+ port->mctrl = (old & ~clear) | set;
+ if (old != port->mctrl)
+ port->ops->set_mctrl(port, port->mctrl);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+#define uart_set_mctrl(port,set) uart_update_mctrl(port,set,0)
+#define uart_clear_mctrl(port,clear) uart_update_mctrl(port,0,clear)
+
+/*
+ * Startup the port. This will be called once per open. All calls
+ * will be serialised by the per-port semaphore.
+ */
+static int uart_startup(struct uart_state *state, int init_hw)
+{
+ struct uart_info *info = state->info;
+ struct uart_port *port = state->port;
+ unsigned long page;
+ int retval = 0;
+
+ if (info->flags & UIF_INITIALIZED)
+ return 0;
+
+ /*
+ * Set the TTY IO error marker - we will only clear this
+ * once we have successfully opened the port. Also set
+ * up the tty->alt_speed kludge
+ */
+ if (info->tty)
+ set_bit(TTY_IO_ERROR, &info->tty->flags);
+
+ if (port->type == PORT_UNKNOWN)
+ return 0;
+
+ /*
+ * Initialise and allocate the transmit and temporary
+ * buffer.
+ */
+ if (!info->xmit.buf) {
+ page = get_zeroed_page(GFP_KERNEL);
+ if (!page)
+ return -ENOMEM;
+
+ info->xmit.buf = (unsigned char *) page;
+ uart_circ_clear(&info->xmit);
+ }
+
+ retval = port->ops->startup(port);
+ if (retval == 0) {
+ if (init_hw) {
+ /*
+ * Initialise the hardware port settings.
+ */
+ uart_change_speed(state, NULL);
+
+ /*
+ * Setup the RTS and DTR signals once the
+ * port is open and ready to respond.
+ */
+ if (info->tty->termios->c_cflag & CBAUD)
+ uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR);
+ }
+
+ info->flags |= UIF_INITIALIZED;
+
+ clear_bit(TTY_IO_ERROR, &info->tty->flags);
+ }
+
+ if (retval && capable(CAP_SYS_ADMIN))
+ retval = 0;
+
+ return retval;
+}
+
+/*
+ * This routine will shutdown a serial port; interrupts are disabled, and
+ * DTR is dropped if the hangup on close termio flag is on. Calls to
+ * uart_shutdown are serialised by the per-port semaphore.
+ */
+static void uart_shutdown(struct uart_state *state)
+{
+ struct uart_info *info = state->info;
+ struct uart_port *port = state->port;
+
+ if (!(info->flags & UIF_INITIALIZED))
+ return;
+
+ /*
+ * Turn off DTR and RTS early.
+ */
+ if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
+ uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+
+ /*
+ * clear delta_msr_wait queue to avoid mem leaks: we may free
+ * the irq here so the queue might never be woken up. Note
+ * that we won't end up waiting on delta_msr_wait again since
+ * any outstanding file descriptors should be pointing at
+ * hung_up_tty_fops now.
+ */
+ wake_up_interruptible(&info->delta_msr_wait);
+
+ /*
+ * Free the IRQ and disable the port.
+ */
+ port->ops->shutdown(port);
+
+ /*
+ * Ensure that the IRQ handler isn't running on another CPU.
+ */
+ synchronize_irq(port->irq);
+
+ /*
+ * Free the transmit buffer page.
+ */
+ if (info->xmit.buf) {
+ free_page((unsigned long)info->xmit.buf);
+ info->xmit.buf = NULL;
+ }
+
+ /*
+ * kill off our tasklet
+ */
+ tasklet_kill(&info->tlet);
+ if (info->tty)
+ set_bit(TTY_IO_ERROR, &info->tty->flags);
+
+ info->flags &= ~UIF_INITIALIZED;
+}
+
+/**
+ * uart_update_timeout - update per-port FIFO timeout.
+ * @port: uart_port structure describing the port
+ * @cflag: termios cflag value
+ * @baud: speed of the port
+ *
+ * Set the port FIFO timeout value. The @cflag value should
+ * reflect the actual hardware settings.
+ */
+void
+uart_update_timeout(struct uart_port *port, unsigned int cflag,
+ unsigned int baud)
+{
+ unsigned int bits;
+
+ /* byte size and parity */
+ switch (cflag & CSIZE) {
+ case CS5:
+ bits = 7;
+ break;
+ case CS6:
+ bits = 8;
+ break;
+ case CS7:
+ bits = 9;
+ break;
+ default:
+ bits = 10;
+ break; // CS8
+ }
+
+ if (cflag & CSTOPB)
+ bits++;
+ if (cflag & PARENB)
+ bits++;
+
+ /*
+ * The total number of bits to be transmitted in the fifo.
+ */
+ bits = bits * port->fifosize;
+
+ /*
+ * Figure the timeout to send the above number of bits.
+ * Add .02 seconds of slop
+ */
+ port->timeout = (HZ * bits) / baud + HZ/50;
+}
+
+EXPORT_SYMBOL(uart_update_timeout);
+
+/**
+ * uart_get_baud_rate - return baud rate for a particular port
+ * @port: uart_port structure describing the port in question.
+ * @termios: desired termios settings.
+ * @old: old termios (or NULL)
+ * @min: minimum acceptable baud rate
+ * @max: maximum acceptable baud rate
+ *
+ * Decode the termios structure into a numeric baud rate,
+ * taking account of the magic 38400 baud rate (with spd_*
+ * flags), and mapping the %B0 rate to 9600 baud.
+ *
+ * If the new baud rate is invalid, try the old termios setting.
+ * If it's still invalid, we try 9600 baud.
+ *
+ * Update the @termios structure to reflect the baud rate
+ * we're actually going to be using.
+ */
+unsigned int
+uart_get_baud_rate(struct uart_port *port, struct termios *termios,
+ struct termios *old, unsigned int min, unsigned int max)
+{
+ unsigned int try, baud, altbaud = 38400;
+ unsigned int flags = port->flags & UPF_SPD_MASK;
+
+ if (flags == UPF_SPD_HI)
+ altbaud = 57600;
+ if (flags == UPF_SPD_VHI)
+ altbaud = 115200;
+ if (flags == UPF_SPD_SHI)
+ altbaud = 230400;
+ if (flags == UPF_SPD_WARP)
+ altbaud = 460800;
+
+ for (try = 0; try < 2; try++) {
+ baud = tty_termios_baud_rate(termios);
+
+ /*
+ * The spd_hi, spd_vhi, spd_shi, spd_warp kludge...
+ * Die! Die! Die!
+ */
+ if (baud == 38400)
+ baud = altbaud;
+
+ /*
+ * Special case: B0 rate.
+ */
+ if (baud == 0)
+ baud = 9600;
+
+ if (baud >= min && baud <= max)
+ return baud;
+
+ /*
+ * Oops, the quotient was zero. Try again with
+ * the old baud rate if possible.
+ */
+ termios->c_cflag &= ~CBAUD;
+ if (old) {
+ termios->c_cflag |= old->c_cflag & CBAUD;
+ old = NULL;
+ continue;
+ }
+
+ /*
+ * As a last resort, if the quotient is zero,
+ * default to 9600 bps
+ */
+ termios->c_cflag |= B9600;
+ }
+
+ return 0;
+}
+
+EXPORT_SYMBOL(uart_get_baud_rate);
+
+/**
+ * uart_get_divisor - return uart clock divisor
+ * @port: uart_port structure describing the port.
+ * @baud: desired baud rate
+ *
+ * Calculate the uart clock divisor for the port.
+ */
+unsigned int
+uart_get_divisor(struct uart_port *port, unsigned int baud)
+{
+ unsigned int quot;
+
+ /*
+ * Old custom speed handling.
+ */
+ if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
+ quot = port->custom_divisor;
+ else
+ quot = (port->uartclk + (8 * baud)) / (16 * baud);
+
+ return quot;
+}
+
+EXPORT_SYMBOL(uart_get_divisor);
+
+static void
+uart_change_speed(struct uart_state *state, struct termios *old_termios)
+{
+ struct tty_struct *tty = state->info->tty;
+ struct uart_port *port = state->port;
+ struct termios *termios;
+
+ /*
+ * If we have no tty, termios, or the port does not exist,
+ * then we can't set the parameters for this port.
+ */
+ if (!tty || !tty->termios || port->type == PORT_UNKNOWN)
+ return;
+
+ termios = tty->termios;
+
+ /*
+ * Set flags based on termios cflag
+ */
+ if (termios->c_cflag & CRTSCTS)
+ state->info->flags |= UIF_CTS_FLOW;
+ else
+ state->info->flags &= ~UIF_CTS_FLOW;
+
+ if (termios->c_cflag & CLOCAL)
+ state->info->flags &= ~UIF_CHECK_CD;
+ else
+ state->info->flags |= UIF_CHECK_CD;
+
+ port->ops->set_termios(port, termios, old_termios);
+}
+
+static inline void
+__uart_put_char(struct uart_port *port, struct circ_buf *circ, unsigned char c)
+{
+ unsigned long flags;
+
+ if (!circ->buf)
+ return;
+
+ spin_lock_irqsave(&port->lock, flags);
+ if (uart_circ_chars_free(circ) != 0) {
+ circ->buf[circ->head] = c;
+ circ->head = (circ->head + 1) & (UART_XMIT_SIZE - 1);
+ }
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void uart_put_char(struct tty_struct *tty, unsigned char ch)
+{
+ struct uart_state *state = tty->driver_data;
+
+ __uart_put_char(state->port, &state->info->xmit, ch);
+}
+
+static void uart_flush_chars(struct tty_struct *tty)
+{
+ uart_start(tty);
+}
+
+static int
+uart_write(struct tty_struct *tty, const unsigned char * buf, int count)
+{
+ struct uart_state *state = tty->driver_data;
+ struct uart_port *port = state->port;
+ struct circ_buf *circ = &state->info->xmit;
+ unsigned long flags;
+ int c, ret = 0;
+
+ if (!circ->buf)
+ return 0;
+
+ spin_lock_irqsave(&port->lock, flags);
+ while (1) {
+ c = CIRC_SPACE_TO_END(circ->head, circ->tail, UART_XMIT_SIZE);
+ if (count < c)
+ c = count;
+ if (c <= 0)
+ break;
+ memcpy(circ->buf + circ->head, buf, c);
+ circ->head = (circ->head + c) & (UART_XMIT_SIZE - 1);
+ buf += c;
+ count -= c;
+ ret += c;
+ }
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ uart_start(tty);
+ return ret;
+}
+
+static int uart_write_room(struct tty_struct *tty)
+{
+ struct uart_state *state = tty->driver_data;
+
+ return uart_circ_chars_free(&state->info->xmit);
+}
+
+static int uart_chars_in_buffer(struct tty_struct *tty)
+{
+ struct uart_state *state = tty->driver_data;
+
+ return uart_circ_chars_pending(&state->info->xmit);
+}
+
+static void uart_flush_buffer(struct tty_struct *tty)
+{
+ struct uart_state *state = tty->driver_data;
+ struct uart_port *port = state->port;
+ unsigned long flags;
+
+ DPRINTK("uart_flush_buffer(%d) called\n", tty->index);
+
+ spin_lock_irqsave(&port->lock, flags);
+ uart_circ_clear(&state->info->xmit);
+ spin_unlock_irqrestore(&port->lock, flags);
+ tty_wakeup(tty);
+}
+
+/*
+ * This function is used to send a high-priority XON/XOFF character to
+ * the device
+ */
+static void uart_send_xchar(struct tty_struct *tty, char ch)
+{
+ struct uart_state *state = tty->driver_data;
+ struct uart_port *port = state->port;
+ unsigned long flags;
+
+ if (port->ops->send_xchar)
+ port->ops->send_xchar(port, ch);
+ else {
+ port->x_char = ch;
+ if (ch) {
+ spin_lock_irqsave(&port->lock, flags);
+ port->ops->start_tx(port, 0);
+ spin_unlock_irqrestore(&port->lock, flags);
+ }
+ }
+}
+
+static void uart_throttle(struct tty_struct *tty)
+{
+ struct uart_state *state = tty->driver_data;
+
+ if (I_IXOFF(tty))
+ uart_send_xchar(tty, STOP_CHAR(tty));
+
+ if (tty->termios->c_cflag & CRTSCTS)
+ uart_clear_mctrl(state->port, TIOCM_RTS);
+}
+
+static void uart_unthrottle(struct tty_struct *tty)
+{
+ struct uart_state *state = tty->driver_data;
+ struct uart_port *port = state->port;
+
+ if (I_IXOFF(tty)) {
+ if (port->x_char)
+ port->x_char = 0;
+ else
+ uart_send_xchar(tty, START_CHAR(tty));
+ }
+
+ if (tty->termios->c_cflag & CRTSCTS)
+ uart_set_mctrl(port, TIOCM_RTS);
+}
+
+static int uart_get_info(struct uart_state *state,
+ struct serial_struct __user *retinfo)
+{
+ struct uart_port *port = state->port;
+ struct serial_struct tmp;
+
+ memset(&tmp, 0, sizeof(tmp));
+ tmp.type = port->type;
+ tmp.line = port->line;
+ tmp.port = port->iobase;
+ if (HIGH_BITS_OFFSET)
+ tmp.port_high = (long) port->iobase >> HIGH_BITS_OFFSET;
+ tmp.irq = port->irq;
+ tmp.flags = port->flags;
+ tmp.xmit_fifo_size = port->fifosize;
+ tmp.baud_base = port->uartclk / 16;
+ tmp.close_delay = state->close_delay / 10;
+ tmp.closing_wait = state->closing_wait == USF_CLOSING_WAIT_NONE ?
+ ASYNC_CLOSING_WAIT_NONE :
+ state->closing_wait / 10;
+ tmp.custom_divisor = port->custom_divisor;
+ tmp.hub6 = port->hub6;
+ tmp.io_type = port->iotype;
+ tmp.iomem_reg_shift = port->regshift;
+ tmp.iomem_base = (void *)port->mapbase;
+
+ if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
+ return -EFAULT;
+ return 0;
+}
+
+static int uart_set_info(struct uart_state *state,
+ struct serial_struct __user *newinfo)
+{
+ struct serial_struct new_serial;
+ struct uart_port *port = state->port;
+ unsigned long new_port;
+ unsigned int change_irq, change_port, old_flags, closing_wait;
+ unsigned int old_custom_divisor, close_delay;
+ int retval = 0;
+
+ if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
+ return -EFAULT;
+
+ new_port = new_serial.port;
+ if (HIGH_BITS_OFFSET)
+ new_port += (unsigned long) new_serial.port_high << HIGH_BITS_OFFSET;
+
+ new_serial.irq = irq_canonicalize(new_serial.irq);
+ close_delay = new_serial.close_delay * 10;
+ closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+ USF_CLOSING_WAIT_NONE : new_serial.closing_wait * 10;
+
+ /*
+ * This semaphore protects state->count. It is also
+ * very useful to prevent opens. Also, take the
+ * port configuration semaphore to make sure that a
+ * module insertion/removal doesn't change anything
+ * under us.
+ */
+ down(&state->sem);
+
+ change_irq = new_serial.irq != port->irq;
+
+ /*
+ * Since changing the 'type' of the port changes its resource
+ * allocations, we should treat type changes the same as
+ * IO port changes.
+ */
+ change_port = new_port != port->iobase ||
+ (unsigned long)new_serial.iomem_base != port->mapbase ||
+ new_serial.hub6 != port->hub6 ||
+ new_serial.io_type != port->iotype ||
+ new_serial.iomem_reg_shift != port->regshift ||
+ new_serial.type != port->type;
+
+ old_flags = port->flags;
+ old_custom_divisor = port->custom_divisor;
+
+ if (!capable(CAP_SYS_ADMIN)) {
+ retval = -EPERM;
+ if (change_irq || change_port ||
+ (new_serial.baud_base != port->uartclk / 16) ||
+ (close_delay != state->close_delay) ||
+ (closing_wait != state->closing_wait) ||
+ (new_serial.xmit_fifo_size != port->fifosize) ||
+ (((new_serial.flags ^ old_flags) & ~UPF_USR_MASK) != 0))
+ goto exit;
+ port->flags = ((port->flags & ~UPF_USR_MASK) |
+ (new_serial.flags & UPF_USR_MASK));
+ port->custom_divisor = new_serial.custom_divisor;
+ goto check_and_exit;
+ }
+
+ /*
+ * Ask the low level driver to verify the settings.
+ */
+ if (port->ops->verify_port)
+ retval = port->ops->verify_port(port, &new_serial);
+
+ if ((new_serial.irq >= NR_IRQS) || (new_serial.irq < 0) ||
+ (new_serial.baud_base < 9600))
+ retval = -EINVAL;
+
+ if (retval)
+ goto exit;
+
+ if (change_port || change_irq) {
+ retval = -EBUSY;
+
+ /*
+ * Make sure that we are the sole user of this port.
+ */
+ if (uart_users(state) > 1)
+ goto exit;
+
+ /*
+ * We need to shutdown the serial port at the old
+ * port/type/irq combination.
+ */
+ uart_shutdown(state);
+ }
+
+ if (change_port) {
+ unsigned long old_iobase, old_mapbase;
+ unsigned int old_type, old_iotype, old_hub6, old_shift;
+
+ old_iobase = port->iobase;
+ old_mapbase = port->mapbase;
+ old_type = port->type;
+ old_hub6 = port->hub6;
+ old_iotype = port->iotype;
+ old_shift = port->regshift;
+
+ /*
+ * Free and release old regions
+ */
+ if (old_type != PORT_UNKNOWN)
+ port->ops->release_port(port);
+
+ port->iobase = new_port;
+ port->type = new_serial.type;
+ port->hub6 = new_serial.hub6;
+ port->iotype = new_serial.io_type;
+ port->regshift = new_serial.iomem_reg_shift;
+ port->mapbase = (unsigned long)new_serial.iomem_base;
+
+ /*
+ * Claim and map the new regions
+ */
+ if (port->type != PORT_UNKNOWN) {
+ retval = port->ops->request_port(port);
+ } else {
+ /* Always success - Jean II */
+ retval = 0;
+ }
+
+ /*
+ * If we fail to request resources for the
+ * new port, try to restore the old settings.
+ */
+ if (retval && old_type != PORT_UNKNOWN) {
+ port->iobase = old_iobase;
+ port->type = old_type;
+ port->hub6 = old_hub6;
+ port->iotype = old_iotype;
+ port->regshift = old_shift;
+ port->mapbase = old_mapbase;
+ retval = port->ops->request_port(port);
+ /*
+ * If we failed to restore the old settings,
+ * we fail like this.
+ */
+ if (retval)
+ port->type = PORT_UNKNOWN;
+
+ /*
+ * We failed anyway.
+ */
+ retval = -EBUSY;
+ }
+ }
+
+ port->irq = new_serial.irq;
+ port->uartclk = new_serial.baud_base * 16;
+ port->flags = (port->flags & ~UPF_CHANGE_MASK) |
+ (new_serial.flags & UPF_CHANGE_MASK);
+ port->custom_divisor = new_serial.custom_divisor;
+ state->close_delay = close_delay;
+ state->closing_wait = closing_wait;
+ port->fifosize = new_serial.xmit_fifo_size;
+ if (state->info->tty)
+ state->info->tty->low_latency =
+ (port->flags & UPF_LOW_LATENCY) ? 1 : 0;
+
+ check_and_exit:
+ retval = 0;
+ if (port->type == PORT_UNKNOWN)
+ goto exit;
+ if (state->info->flags & UIF_INITIALIZED) {
+ if (((old_flags ^ port->flags) & UPF_SPD_MASK) ||
+ old_custom_divisor != port->custom_divisor) {
+ /*
+ * If they're setting up a custom divisor or speed,
+ * instead of clearing it, then bitch about it. No
+ * need to rate-limit; it's CAP_SYS_ADMIN only.
+ */
+ if (port->flags & UPF_SPD_MASK) {
+ char buf[64];
+ printk(KERN_NOTICE
+ "%s sets custom speed on %s. This "
+ "is deprecated.\n", current->comm,
+ tty_name(state->info->tty, buf));
+ }
+ uart_change_speed(state, NULL);
+ }
+ } else
+ retval = uart_startup(state, 1);
+ exit:
+ up(&state->sem);
+ return retval;
+}
+
+
+/*
+ * uart_get_lsr_info - get line status register info.
+ * Note: uart_ioctl protects us against hangups.
+ */
+static int uart_get_lsr_info(struct uart_state *state,
+ unsigned int __user *value)
+{
+ struct uart_port *port = state->port;
+ unsigned int result;
+
+ result = port->ops->tx_empty(port);
+
+ /*
+ * If we're about to load something into the transmit
+ * register, we'll pretend the transmitter isn't empty to
+ * avoid a race condition (depending on when the transmit
+ * interrupt happens).
+ */
+ if (port->x_char ||
+ ((uart_circ_chars_pending(&state->info->xmit) > 0) &&
+ !state->info->tty->stopped && !state->info->tty->hw_stopped))
+ result &= ~TIOCSER_TEMT;
+
+ return put_user(result, value);
+}
+
+static int uart_tiocmget(struct tty_struct *tty, struct file *file)
+{
+ struct uart_state *state = tty->driver_data;
+ struct uart_port *port = state->port;
+ int result = -EIO;
+
+ down(&state->sem);
+ if ((!file || !tty_hung_up_p(file)) &&
+ !(tty->flags & (1 << TTY_IO_ERROR))) {
+ result = port->mctrl;
+ result |= port->ops->get_mctrl(port);
+ }
+ up(&state->sem);
+
+ return result;
+}
+
+static int
+uart_tiocmset(struct tty_struct *tty, struct file *file,
+ unsigned int set, unsigned int clear)
+{
+ struct uart_state *state = tty->driver_data;
+ struct uart_port *port = state->port;
+ int ret = -EIO;
+
+ down(&state->sem);
+ if ((!file || !tty_hung_up_p(file)) &&
+ !(tty->flags & (1 << TTY_IO_ERROR))) {
+ uart_update_mctrl(port, set, clear);
+ ret = 0;
+ }
+ up(&state->sem);
+ return ret;
+}
+
+static void uart_break_ctl(struct tty_struct *tty, int break_state)
+{
+ struct uart_state *state = tty->driver_data;
+ struct uart_port *port = state->port;
+
+ BUG_ON(!kernel_locked());
+
+ down(&state->sem);
+
+ if (port->type != PORT_UNKNOWN)
+ port->ops->break_ctl(port, break_state);
+
+ up(&state->sem);
+}
+
+static int uart_do_autoconfig(struct uart_state *state)
+{
+ struct uart_port *port = state->port;
+ int flags, ret;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ /*
+ * Take the per-port semaphore. This prevents count from
+ * changing, and hence any extra opens of the port while
+ * we're auto-configuring.
+ */
+ if (down_interruptible(&state->sem))
+ return -ERESTARTSYS;
+
+ ret = -EBUSY;
+ if (uart_users(state) == 1) {
+ uart_shutdown(state);
+
+ /*
+ * If we already have a port type configured,
+ * we must release its resources.
+ */
+ if (port->type != PORT_UNKNOWN)
+ port->ops->release_port(port);
+
+ flags = UART_CONFIG_TYPE;
+ if (port->flags & UPF_AUTO_IRQ)
+ flags |= UART_CONFIG_IRQ;
+
+ /*
+ * This will claim the ports resources if
+ * a port is found.
+ */
+ port->ops->config_port(port, flags);
+
+ ret = uart_startup(state, 1);
+ }
+ up(&state->sem);
+ return ret;
+}
+
+/*
+ * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
+ * - mask passed in arg for lines of interest
+ * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
+ * Caller should use TIOCGICOUNT to see which one it was
+ */
+static int
+uart_wait_modem_status(struct uart_state *state, unsigned long arg)
+{
+ struct uart_port *port = state->port;
+ DECLARE_WAITQUEUE(wait, current);
+ struct uart_icount cprev, cnow;
+ int ret;
+
+ /*
+ * note the counters on entry
+ */
+ spin_lock_irq(&port->lock);
+ memcpy(&cprev, &port->icount, sizeof(struct uart_icount));
+
+ /*
+ * Force modem status interrupts on
+ */
+ port->ops->enable_ms(port);
+ spin_unlock_irq(&port->lock);
+
+ add_wait_queue(&state->info->delta_msr_wait, &wait);
+ for (;;) {
+ spin_lock_irq(&port->lock);
+ memcpy(&cnow, &port->icount, sizeof(struct uart_icount));
+ spin_unlock_irq(&port->lock);
+
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
+ ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
+ ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
+ ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
+ ret = 0;
+ break;
+ }
+
+ schedule();
+
+ /* see if a signal did it */
+ if (signal_pending(current)) {
+ ret = -ERESTARTSYS;
+ break;
+ }
+
+ cprev = cnow;
+ }
+
+ current->state = TASK_RUNNING;
+ remove_wait_queue(&state->info->delta_msr_wait, &wait);
+
+ return ret;
+}
+
+/*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ * RI where only 0->1 is counted.
+ */
+static int uart_get_count(struct uart_state *state,
+ struct serial_icounter_struct __user *icnt)
+{
+ struct serial_icounter_struct icount;
+ struct uart_icount cnow;
+ struct uart_port *port = state->port;
+
+ spin_lock_irq(&port->lock);
+ memcpy(&cnow, &port->icount, sizeof(struct uart_icount));
+ spin_unlock_irq(&port->lock);
+
+ icount.cts = cnow.cts;
+ icount.dsr = cnow.dsr;
+ icount.rng = cnow.rng;
+ icount.dcd = cnow.dcd;
+ icount.rx = cnow.rx;
+ icount.tx = cnow.tx;
+ icount.frame = cnow.frame;
+ icount.overrun = cnow.overrun;
+ icount.parity = cnow.parity;
+ icount.brk = cnow.brk;
+ icount.buf_overrun = cnow.buf_overrun;
+
+ return copy_to_user(icnt, &icount, sizeof(icount)) ? -EFAULT : 0;
+}
+
+/*
+ * Called via sys_ioctl under the BKL. We can use spin_lock_irq() here.
+ */
+static int
+uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
+ unsigned long arg)
+{
+ struct uart_state *state = tty->driver_data;
+ void __user *uarg = (void __user *)arg;
+ int ret = -ENOIOCTLCMD;
+
+ BUG_ON(!kernel_locked());
+
+ /*
+ * These ioctls don't rely on the hardware to be present.
+ */
+ switch (cmd) {
+ case TIOCGSERIAL:
+ ret = uart_get_info(state, uarg);
+ break;
+
+ case TIOCSSERIAL:
+ ret = uart_set_info(state, uarg);
+ break;
+
+ case TIOCSERCONFIG:
+ ret = uart_do_autoconfig(state);
+ break;
+
+ case TIOCSERGWILD: /* obsolete */
+ case TIOCSERSWILD: /* obsolete */
+ ret = 0;
+ break;
+ }
+
+ if (ret != -ENOIOCTLCMD)
+ goto out;
+
+ if (tty->flags & (1 << TTY_IO_ERROR)) {
+ ret = -EIO;
+ goto out;
+ }
+
+ /*
+ * The following should only be used when hardware is present.
+ */
+ switch (cmd) {
+ case TIOCMIWAIT:
+ ret = uart_wait_modem_status(state, arg);
+ break;
+
+ case TIOCGICOUNT:
+ ret = uart_get_count(state, uarg);
+ break;
+ }
+
+ if (ret != -ENOIOCTLCMD)
+ goto out;
+
+ down(&state->sem);
+
+ if (tty_hung_up_p(filp)) {
+ ret = -EIO;
+ goto out_up;
+ }
+
+ /*
+ * All these rely on hardware being present and need to be
+ * protected against the tty being hung up.
+ */
+ switch (cmd) {
+ case TIOCSERGETLSR: /* Get line status register */
+ ret = uart_get_lsr_info(state, uarg);
+ break;
+
+ default: {
+ struct uart_port *port = state->port;
+ if (port->ops->ioctl)
+ ret = port->ops->ioctl(port, cmd, arg);
+ break;
+ }
+ }
+ out_up:
+ up(&state->sem);
+ out:
+ return ret;
+}
+
+static void uart_set_termios(struct tty_struct *tty, struct termios *old_termios)
+{
+ struct uart_state *state = tty->driver_data;
+ unsigned long flags;
+ unsigned int cflag = tty->termios->c_cflag;
+
+ BUG_ON(!kernel_locked());
+
+ /*
+ * These are the bits that are used to setup various
+ * flags in the low level driver.
+ */
+#define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+
+ if ((cflag ^ old_termios->c_cflag) == 0 &&
+ RELEVANT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0)
+ return;
+
+ uart_change_speed(state, old_termios);
+
+ /* Handle transition to B0 status */
+ if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD))
+ uart_clear_mctrl(state->port, TIOCM_RTS | TIOCM_DTR);
+
+ /* Handle transition away from B0 status */
+ if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) {
+ unsigned int mask = TIOCM_DTR;
+ if (!(cflag & CRTSCTS) ||
+ !test_bit(TTY_THROTTLED, &tty->flags))
+ mask |= TIOCM_RTS;
+ uart_set_mctrl(state->port, mask);
+ }
+
+ /* Handle turning off CRTSCTS */
+ if ((old_termios->c_cflag & CRTSCTS) && !(cflag & CRTSCTS)) {
+ spin_lock_irqsave(&state->port->lock, flags);
+ tty->hw_stopped = 0;
+ __uart_start(tty);
+ spin_unlock_irqrestore(&state->port->lock, flags);
+ }
+
+#if 0
+ /*
+ * No need to wake up processes in open wait, since they
+ * sample the CLOCAL flag once, and don't recheck it.
+ * XXX It's not clear whether the current behavior is correct
+ * or not. Hence, this may change.....
+ */
+ if (!(old_termios->c_cflag & CLOCAL) &&
+ (tty->termios->c_cflag & CLOCAL))
+ wake_up_interruptible(&state->info->open_wait);
+#endif
+}
+
+/*
+ * In 2.4.5, calls to this will be serialized via the BKL in
+ * linux/drivers/char/tty_io.c:tty_release()
+ * linux/drivers/char/tty_io.c:do_tty_handup()
+ */
+static void uart_close(struct tty_struct *tty, struct file *filp)
+{
+ struct uart_state *state = tty->driver_data;
+ struct uart_port *port;
+
+ BUG_ON(!kernel_locked());
+
+ if (!state || !state->port)
+ return;
+
+ port = state->port;
+
+ DPRINTK("uart_close(%d) called\n", port->line);
+
+ down(&state->sem);
+
+ if (tty_hung_up_p(filp))
+ goto done;
+
+ if ((tty->count == 1) && (state->count != 1)) {
+ /*
+ * Uh, oh. tty->count is 1, which means that the tty
+ * structure will be freed. state->count should always
+ * be one in these conditions. If it's greater than
+ * one, we've got real problems, since it means the
+ * serial port won't be shutdown.
+ */
+ printk(KERN_ERR "uart_close: bad serial port count; tty->count is 1, "
+ "state->count is %d\n", state->count);
+ state->count = 1;
+ }
+ if (--state->count < 0) {
+ printk(KERN_ERR "uart_close: bad serial port count for %s: %d\n",
+ tty->name, state->count);
+ state->count = 0;
+ }
+ if (state->count)
+ goto done;
+
+ /*
+ * Now we wait for the transmit buffer to clear; and we notify
+ * the line discipline to only process XON/XOFF characters by
+ * setting tty->closing.
+ */
+ tty->closing = 1;
+
+ if (state->closing_wait != USF_CLOSING_WAIT_NONE)
+ tty_wait_until_sent(tty, msecs_to_jiffies(state->closing_wait));
+
+ /*
+ * At this point, we stop accepting input. To do this, we
+ * disable the receive line status interrupts.
+ */
+ if (state->info->flags & UIF_INITIALIZED) {
+ unsigned long flags;
+ spin_lock_irqsave(&port->lock, flags);
+ port->ops->stop_rx(port);
+ spin_unlock_irqrestore(&port->lock, flags);
+ /*
+ * Before we drop DTR, make sure the UART transmitter
+ * has completely drained; this is especially
+ * important if there is a transmit FIFO!
+ */
+ uart_wait_until_sent(tty, port->timeout);
+ }
+
+ uart_shutdown(state);
+ uart_flush_buffer(tty);
+
+ tty_ldisc_flush(tty);
+
+ tty->closing = 0;
+ state->info->tty = NULL;
+
+ if (state->info->blocked_open) {
+ if (state->close_delay)
+ msleep_interruptible(state->close_delay);
+ } else if (!uart_console(port)) {
+ uart_change_pm(state, 3);
+ }
+
+ /*
+ * Wake up anyone trying to open this port.
+ */
+ state->info->flags &= ~UIF_NORMAL_ACTIVE;
+ wake_up_interruptible(&state->info->open_wait);
+
+ done:
+ up(&state->sem);
+}
+
+static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+ struct uart_state *state = tty->driver_data;
+ struct uart_port *port = state->port;
+ unsigned long char_time, expire;
+
+ BUG_ON(!kernel_locked());
+
+ if (port->type == PORT_UNKNOWN || port->fifosize == 0)
+ return;
+
+ /*
+ * Set the check interval to be 1/5 of the estimated time to
+ * send a single character, and make it at least 1. The check
+ * interval should also be less than the timeout.
+ *
+ * Note: we have to use pretty tight timings here to satisfy
+ * the NIST-PCTS.
+ */
+ char_time = (port->timeout - HZ/50) / port->fifosize;
+ char_time = char_time / 5;
+ if (char_time == 0)
+ char_time = 1;
+ if (timeout && timeout < char_time)
+ char_time = timeout;
+
+ /*
+ * If the transmitter hasn't cleared in twice the approximate
+ * amount of time to send the entire FIFO, it probably won't
+ * ever clear. This assumes the UART isn't doing flow
+ * control, which is currently the case. Hence, if it ever
+ * takes longer than port->timeout, this is probably due to a
+ * UART bug of some kind. So, we clamp the timeout parameter at
+ * 2*port->timeout.
+ */
+ if (timeout == 0 || timeout > 2 * port->timeout)
+ timeout = 2 * port->timeout;
+
+ expire = jiffies + timeout;
+
+ DPRINTK("uart_wait_until_sent(%d), jiffies=%lu, expire=%lu...\n",
+ port->line, jiffies, expire);
+
+ /*
+ * Check whether the transmitter is empty every 'char_time'.
+ * 'timeout' / 'expire' give us the maximum amount of time
+ * we wait.
+ */
+ while (!port->ops->tx_empty(port)) {
+ msleep_interruptible(jiffies_to_msecs(char_time));
+ if (signal_pending(current))
+ break;
+ if (time_after(jiffies, expire))
+ break;
+ }
+ set_current_state(TASK_RUNNING); /* might not be needed */
+}
+
+/*
+ * This is called with the BKL held in
+ * linux/drivers/char/tty_io.c:do_tty_hangup()
+ * We're called from the eventd thread, so we can sleep for
+ * a _short_ time only.
+ */
+static void uart_hangup(struct tty_struct *tty)
+{
+ struct uart_state *state = tty->driver_data;
+
+ BUG_ON(!kernel_locked());
+ DPRINTK("uart_hangup(%d)\n", state->port->line);
+
+ down(&state->sem);
+ if (state->info && state->info->flags & UIF_NORMAL_ACTIVE) {
+ uart_flush_buffer(tty);
+ uart_shutdown(state);
+ state->count = 0;
+ state->info->flags &= ~UIF_NORMAL_ACTIVE;
+ state->info->tty = NULL;
+ wake_up_interruptible(&state->info->open_wait);
+ wake_up_interruptible(&state->info->delta_msr_wait);
+ }
+ up(&state->sem);
+}
+
+/*
+ * Copy across the serial console cflag setting into the termios settings
+ * for the initial open of the port. This allows continuity between the
+ * kernel settings, and the settings init adopts when it opens the port
+ * for the first time.
+ */
+static void uart_update_termios(struct uart_state *state)
+{
+ struct tty_struct *tty = state->info->tty;
+ struct uart_port *port = state->port;
+
+ if (uart_console(port) && port->cons->cflag) {
+ tty->termios->c_cflag = port->cons->cflag;
+ port->cons->cflag = 0;
+ }
+
+ /*
+ * If the device failed to grab its irq resources,
+ * or some other error occurred, don't try to talk
+ * to the port hardware.
+ */
+ if (!(tty->flags & (1 << TTY_IO_ERROR))) {
+ /*
+ * Make termios settings take effect.
+ */
+ uart_change_speed(state, NULL);
+
+ /*
+ * And finally enable the RTS and DTR signals.
+ */
+ if (tty->termios->c_cflag & CBAUD)
+ uart_set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+ }
+}
+
+/*
+ * Block the open until the port is ready. We must be called with
+ * the per-port semaphore held.
+ */
+static int
+uart_block_til_ready(struct file *filp, struct uart_state *state)
+{
+ DECLARE_WAITQUEUE(wait, current);
+ struct uart_info *info = state->info;
+ struct uart_port *port = state->port;
+
+ info->blocked_open++;
+ state->count--;
+
+ add_wait_queue(&info->open_wait, &wait);
+ while (1) {
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ /*
+ * If we have been hung up, tell userspace/restart open.
+ */
+ if (tty_hung_up_p(filp) || info->tty == NULL)
+ break;
+
+ /*
+ * If the port has been closed, tell userspace/restart open.
+ */
+ if (!(info->flags & UIF_INITIALIZED))
+ break;
+
+ /*
+ * If non-blocking mode is set, or CLOCAL mode is set,
+ * we don't want to wait for the modem status lines to
+ * indicate that the port is ready.
+ *
+ * Also, if the port is not enabled/configured, we want
+ * to allow the open to succeed here. Note that we will
+ * have set TTY_IO_ERROR for a non-existant port.
+ */
+ if ((filp->f_flags & O_NONBLOCK) ||
+ (info->tty->termios->c_cflag & CLOCAL) ||
+ (info->tty->flags & (1 << TTY_IO_ERROR))) {
+ break;
+ }
+
+ /*
+ * Set DTR to allow modem to know we're waiting. Do
+ * not set RTS here - we want to make sure we catch
+ * the data from the modem.
+ */
+ if (info->tty->termios->c_cflag & CBAUD)
+ uart_set_mctrl(port, TIOCM_DTR);
+
+ /*
+ * and wait for the carrier to indicate that the
+ * modem is ready for us.
+ */
+ if (port->ops->get_mctrl(port) & TIOCM_CAR)
+ break;
+
+ up(&state->sem);
+ schedule();
+ down(&state->sem);
+
+ if (signal_pending(current))
+ break;
+ }
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&info->open_wait, &wait);
+
+ state->count++;
+ info->blocked_open--;
+
+ if (signal_pending(current))
+ return -ERESTARTSYS;
+
+ if (!info->tty || tty_hung_up_p(filp))
+ return -EAGAIN;
+
+ return 0;
+}
+
+static struct uart_state *uart_get(struct uart_driver *drv, int line)
+{
+ struct uart_state *state;
+
+ down(&port_sem);
+ state = drv->state + line;
+ if (down_interruptible(&state->sem)) {
+ state = ERR_PTR(-ERESTARTSYS);
+ goto out;
+ }
+
+ state->count++;
+ if (!state->port) {
+ state->count--;
+ up(&state->sem);
+ state = ERR_PTR(-ENXIO);
+ goto out;
+ }
+
+ if (!state->info) {
+ state->info = kmalloc(sizeof(struct uart_info), GFP_KERNEL);
+ if (state->info) {
+ memset(state->info, 0, sizeof(struct uart_info));
+ init_waitqueue_head(&state->info->open_wait);
+ init_waitqueue_head(&state->info->delta_msr_wait);
+
+ /*
+ * Link the info into the other structures.
+ */
+ state->port->info = state->info;
+
+ tasklet_init(&state->info->tlet, uart_tasklet_action,
+ (unsigned long)state);
+ } else {
+ state->count--;
+ up(&state->sem);
+ state = ERR_PTR(-ENOMEM);
+ }
+ }
+
+ out:
+ up(&port_sem);
+ return state;
+}
+
+/*
+ * In 2.4.5, calls to uart_open are serialised by the BKL in
+ * linux/fs/devices.c:chrdev_open()
+ * Note that if this fails, then uart_close() _will_ be called.
+ *
+ * In time, we want to scrap the "opening nonpresent ports"
+ * behaviour and implement an alternative way for setserial
+ * to set base addresses/ports/types. This will allow us to
+ * get rid of a certain amount of extra tests.
+ */
+static int uart_open(struct tty_struct *tty, struct file *filp)
+{
+ struct uart_driver *drv = (struct uart_driver *)tty->driver->driver_state;
+ struct uart_state *state;
+ int retval, line = tty->index;
+
+ BUG_ON(!kernel_locked());
+ DPRINTK("uart_open(%d) called\n", line);
+
+ /*
+ * tty->driver->num won't change, so we won't fail here with
+ * tty->driver_data set to something non-NULL (and therefore
+ * we won't get caught by uart_close()).
+ */
+ retval = -ENODEV;
+ if (line >= tty->driver->num)
+ goto fail;
+
+ /*
+ * We take the semaphore inside uart_get to guarantee that we won't
+ * be re-entered while allocating the info structure, or while we
+ * request any IRQs that the driver may need. This also has the nice
+ * side-effect that it delays the action of uart_hangup, so we can
+ * guarantee that info->tty will always contain something reasonable.
+ */
+ state = uart_get(drv, line);
+ if (IS_ERR(state)) {
+ retval = PTR_ERR(state);
+ goto fail;
+ }
+
+ /*
+ * Once we set tty->driver_data here, we are guaranteed that
+ * uart_close() will decrement the driver module use count.
+ * Any failures from here onwards should not touch the count.
+ */
+ tty->driver_data = state;
+ tty->low_latency = (state->port->flags & UPF_LOW_LATENCY) ? 1 : 0;
+ tty->alt_speed = 0;
+ state->info->tty = tty;
+
+ /*
+ * If the port is in the middle of closing, bail out now.
+ */
+ if (tty_hung_up_p(filp)) {
+ retval = -EAGAIN;
+ state->count--;
+ up(&state->sem);
+ goto fail;
+ }
+
+ /*
+ * Make sure the device is in D0 state.
+ */
+ if (state->count == 1)
+ uart_change_pm(state, 0);
+
+ /*
+ * Start up the serial port.
+ */
+ retval = uart_startup(state, 0);
+
+ /*
+ * If we succeeded, wait until the port is ready.
+ */
+ if (retval == 0)
+ retval = uart_block_til_ready(filp, state);
+ up(&state->sem);
+
+ /*
+ * If this is the first open to succeed, adjust things to suit.
+ */
+ if (retval == 0 && !(state->info->flags & UIF_NORMAL_ACTIVE)) {
+ state->info->flags |= UIF_NORMAL_ACTIVE;
+
+ uart_update_termios(state);
+ }
+
+ fail:
+ return retval;
+}
+
+static const char *uart_type(struct uart_port *port)
+{
+ const char *str = NULL;
+
+ if (port->ops->type)
+ str = port->ops->type(port);
+
+ if (!str)
+ str = "unknown";
+
+ return str;
+}
+
+#ifdef CONFIG_PROC_FS
+
+static int uart_line_info(char *buf, struct uart_driver *drv, int i)
+{
+ struct uart_state *state = drv->state + i;
+ struct uart_port *port = state->port;
+ char stat_buf[32];
+ unsigned int status;
+ int ret;
+
+ if (!port)
+ return 0;
+
+ ret = sprintf(buf, "%d: uart:%s %s%08lX irq:%d",
+ port->line, uart_type(port),
+ port->iotype == UPIO_MEM ? "mmio:0x" : "port:",
+ port->iotype == UPIO_MEM ? port->mapbase :
+ (unsigned long) port->iobase,
+ port->irq);
+
+ if (port->type == PORT_UNKNOWN) {
+ strcat(buf, "\n");
+ return ret + 1;
+ }
+
+ if(capable(CAP_SYS_ADMIN))
+ {
+ status = port->ops->get_mctrl(port);
+
+ ret += sprintf(buf + ret, " tx:%d rx:%d",
+ port->icount.tx, port->icount.rx);
+ if (port->icount.frame)
+ ret += sprintf(buf + ret, " fe:%d",
+ port->icount.frame);
+ if (port->icount.parity)
+ ret += sprintf(buf + ret, " pe:%d",
+ port->icount.parity);
+ if (port->icount.brk)
+ ret += sprintf(buf + ret, " brk:%d",
+ port->icount.brk);
+ if (port->icount.overrun)
+ ret += sprintf(buf + ret, " oe:%d",
+ port->icount.overrun);
+
+#define INFOBIT(bit,str) \
+ if (port->mctrl & (bit)) \
+ strncat(stat_buf, (str), sizeof(stat_buf) - \
+ strlen(stat_buf) - 2)
+#define STATBIT(bit,str) \
+ if (status & (bit)) \
+ strncat(stat_buf, (str), sizeof(stat_buf) - \
+ strlen(stat_buf) - 2)
+
+ stat_buf[0] = '\0';
+ stat_buf[1] = '\0';
+ INFOBIT(TIOCM_RTS, "|RTS");
+ STATBIT(TIOCM_CTS, "|CTS");
+ INFOBIT(TIOCM_DTR, "|DTR");
+ STATBIT(TIOCM_DSR, "|DSR");
+ STATBIT(TIOCM_CAR, "|CD");
+ STATBIT(TIOCM_RNG, "|RI");
+ if (stat_buf[0])
+ stat_buf[0] = ' ';
+ strcat(stat_buf, "\n");
+
+ ret += sprintf(buf + ret, stat_buf);
+ } else {
+ strcat(buf, "\n");
+ ret++;
+ }
+#undef STATBIT
+#undef INFOBIT
+ return ret;
+}
+
+static int uart_read_proc(char *page, char **start, off_t off,
+ int count, int *eof, void *data)
+{
+ struct tty_driver *ttydrv = data;
+ struct uart_driver *drv = ttydrv->driver_state;
+ int i, len = 0, l;
+ off_t begin = 0;
+
+ len += sprintf(page, "serinfo:1.0 driver%s%s revision:%s\n",
+ "", "", "");
+ for (i = 0; i < drv->nr && len < PAGE_SIZE - 96; i++) {
+ l = uart_line_info(page + len, drv, i);
+ len += l;
+ if (len + begin > off + count)
+ goto done;
+ if (len + begin < off) {
+ begin += len;
+ len = 0;
+ }
+ }
+ *eof = 1;
+ done:
+ if (off >= len + begin)
+ return 0;
+ *start = page + (off - begin);
+ return (count < begin + len - off) ? count : (begin + len - off);
+}
+#endif
+
+#ifdef CONFIG_SERIAL_CORE_CONSOLE
+/*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+struct uart_port * __init
+uart_get_console(struct uart_port *ports, int nr, struct console *co)
+{
+ int idx = co->index;
+
+ if (idx < 0 || idx >= nr || (ports[idx].iobase == 0 &&
+ ports[idx].membase == NULL))
+ for (idx = 0; idx < nr; idx++)
+ if (ports[idx].iobase != 0 ||
+ ports[idx].membase != NULL)
+ break;
+
+ co->index = idx;
+
+ return ports + idx;
+}
+
+/**
+ * uart_parse_options - Parse serial port baud/parity/bits/flow contro.
+ * @options: pointer to option string
+ * @baud: pointer to an 'int' variable for the baud rate.
+ * @parity: pointer to an 'int' variable for the parity.
+ * @bits: pointer to an 'int' variable for the number of data bits.
+ * @flow: pointer to an 'int' variable for the flow control character.
+ *
+ * uart_parse_options decodes a string containing the serial console
+ * options. The format of the string is <baud><parity><bits><flow>,
+ * eg: 115200n8r
+ */
+void __init
+uart_parse_options(char *options, int *baud, int *parity, int *bits, int *flow)
+{
+ char *s = options;
+
+ *baud = simple_strtoul(s, NULL, 10);
+ while (*s >= '0' && *s <= '9')
+ s++;
+ if (*s)
+ *parity = *s++;
+ if (*s)
+ *bits = *s++ - '0';
+ if (*s)
+ *flow = *s;
+}
+
+struct baud_rates {
+ unsigned int rate;
+ unsigned int cflag;
+};
+
+static struct baud_rates baud_rates[] = {
+ { 921600, B921600 },
+ { 460800, B460800 },
+ { 230400, B230400 },
+ { 115200, B115200 },
+ { 57600, B57600 },
+ { 38400, B38400 },
+ { 19200, B19200 },
+ { 9600, B9600 },
+ { 4800, B4800 },
+ { 2400, B2400 },
+ { 1200, B1200 },
+ { 0, B38400 }
+};
+
+/**
+ * uart_set_options - setup the serial console parameters
+ * @port: pointer to the serial ports uart_port structure
+ * @co: console pointer
+ * @baud: baud rate
+ * @parity: parity character - 'n' (none), 'o' (odd), 'e' (even)
+ * @bits: number of data bits
+ * @flow: flow control character - 'r' (rts)
+ */
+int __init
+uart_set_options(struct uart_port *port, struct console *co,
+ int baud, int parity, int bits, int flow)
+{
+ struct termios termios;
+ int i;
+
+ memset(&termios, 0, sizeof(struct termios));
+
+ termios.c_cflag = CREAD | HUPCL | CLOCAL;
+
+ /*
+ * Construct a cflag setting.
+ */
+ for (i = 0; baud_rates[i].rate; i++)
+ if (baud_rates[i].rate <= baud)
+ break;
+
+ termios.c_cflag |= baud_rates[i].cflag;
+
+ if (bits == 7)
+ termios.c_cflag |= CS7;
+ else
+ termios.c_cflag |= CS8;
+
+ switch (parity) {
+ case 'o': case 'O':
+ termios.c_cflag |= PARODD;
+ /*fall through*/
+ case 'e': case 'E':
+ termios.c_cflag |= PARENB;
+ break;
+ }
+
+ if (flow == 'r')
+ termios.c_cflag |= CRTSCTS;
+
+ port->ops->set_termios(port, &termios, NULL);
+ co->cflag = termios.c_cflag;
+
+ return 0;
+}
+#endif /* CONFIG_SERIAL_CORE_CONSOLE */
+
+static void uart_change_pm(struct uart_state *state, int pm_state)
+{
+ struct uart_port *port = state->port;
+ if (port->ops->pm)
+ port->ops->pm(port, pm_state, state->pm_state);
+ state->pm_state = pm_state;
+}
+
+int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
+{
+ struct uart_state *state = drv->state + port->line;
+
+ down(&state->sem);
+
+ if (state->info && state->info->flags & UIF_INITIALIZED) {
+ struct uart_ops *ops = port->ops;
+
+ spin_lock_irq(&port->lock);
+ ops->stop_tx(port, 0);
+ ops->set_mctrl(port, 0);
+ ops->stop_rx(port);
+ spin_unlock_irq(&port->lock);
+
+ /*
+ * Wait for the transmitter to empty.
+ */
+ while (!ops->tx_empty(port)) {
+ msleep(10);
+ }
+
+ ops->shutdown(port);
+ }
+
+ /*
+ * Disable the console device before suspending.
+ */
+ if (uart_console(port))
+ console_stop(port->cons);
+
+ uart_change_pm(state, 3);
+
+ up(&state->sem);
+
+ return 0;
+}
+
+int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
+{
+ struct uart_state *state = drv->state + port->line;
+
+ down(&state->sem);
+
+ uart_change_pm(state, 0);
+
+ /*
+ * Re-enable the console device after suspending.
+ */
+ if (uart_console(port)) {
+ struct termios termios;
+
+ /*
+ * First try to use the console cflag setting.
+ */
+ memset(&termios, 0, sizeof(struct termios));
+ termios.c_cflag = port->cons->cflag;
+
+ /*
+ * If that's unset, use the tty termios setting.
+ */
+ if (state->info && state->info->tty && termios.c_cflag == 0)
+ termios = *state->info->tty->termios;
+
+ port->ops->set_termios(port, &termios, NULL);
+ console_start(port->cons);
+ }
+
+ if (state->info && state->info->flags & UIF_INITIALIZED) {
+ struct uart_ops *ops = port->ops;
+
+ ops->set_mctrl(port, 0);
+ ops->startup(port);
+ uart_change_speed(state, NULL);
+ spin_lock_irq(&port->lock);
+ ops->set_mctrl(port, port->mctrl);
+ ops->start_tx(port, 0);
+ spin_unlock_irq(&port->lock);
+ }
+
+ up(&state->sem);
+
+ return 0;
+}
+
+static inline void
+uart_report_port(struct uart_driver *drv, struct uart_port *port)
+{
+ printk("%s%d", drv->dev_name, port->line);
+ printk(" at ");
+ switch (port->iotype) {
+ case UPIO_PORT:
+ printk("I/O 0x%x", port->iobase);
+ break;
+ case UPIO_HUB6:
+ printk("I/O 0x%x offset 0x%x", port->iobase, port->hub6);
+ break;
+ case UPIO_MEM:
+ case UPIO_MEM32:
+ printk("MMIO 0x%lx", port->mapbase);
+ break;
+ }
+ printk(" (irq = %d) is a %s\n", port->irq, uart_type(port));
+}
+
+static void
+uart_configure_port(struct uart_driver *drv, struct uart_state *state,
+ struct uart_port *port)
+{
+ unsigned int flags;
+
+ /*
+ * If there isn't a port here, don't do anything further.
+ */
+ if (!port->iobase && !port->mapbase && !port->membase)
+ return;
+
+ /*
+ * Now do the auto configuration stuff. Note that config_port
+ * is expected to claim the resources and map the port for us.
+ */
+ flags = UART_CONFIG_TYPE;
+ if (port->flags & UPF_AUTO_IRQ)
+ flags |= UART_CONFIG_IRQ;
+ if (port->flags & UPF_BOOT_AUTOCONF) {
+ port->type = PORT_UNKNOWN;
+ port->ops->config_port(port, flags);
+ }
+
+ if (port->type != PORT_UNKNOWN) {
+ unsigned long flags;
+
+ uart_report_port(drv, port);
+
+ /*
+ * Ensure that the modem control lines are de-activated.
+ * We probably don't need a spinlock around this, but
+ */
+ spin_lock_irqsave(&port->lock, flags);
+ port->ops->set_mctrl(port, 0);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ /*
+ * Power down all ports by default, except the
+ * console if we have one.
+ */
+ if (!uart_console(port))
+ uart_change_pm(state, 3);
+ }
+}
+
+/*
+ * This reverses the effects of uart_configure_port, hanging up the
+ * port before removal.
+ */
+static void
+uart_unconfigure_port(struct uart_driver *drv, struct uart_state *state)
+{
+ struct uart_port *port = state->port;
+ struct uart_info *info = state->info;
+
+ if (info && info->tty)
+ tty_vhangup(info->tty);
+
+ down(&state->sem);
+
+ state->info = NULL;
+
+ /*
+ * Free the port IO and memory resources, if any.
+ */
+ if (port->type != PORT_UNKNOWN)
+ port->ops->release_port(port);
+
+ /*
+ * Indicate that there isn't a port here anymore.
+ */
+ port->type = PORT_UNKNOWN;
+
+ /*
+ * Kill the tasklet, and free resources.
+ */
+ if (info) {
+ tasklet_kill(&info->tlet);
+ kfree(info);
+ }
+
+ up(&state->sem);
+}
+
+static struct tty_operations uart_ops = {
+ .open = uart_open,
+ .close = uart_close,
+ .write = uart_write,
+ .put_char = uart_put_char,
+ .flush_chars = uart_flush_chars,
+ .write_room = uart_write_room,
+ .chars_in_buffer= uart_chars_in_buffer,
+ .flush_buffer = uart_flush_buffer,
+ .ioctl = uart_ioctl,
+ .throttle = uart_throttle,
+ .unthrottle = uart_unthrottle,
+ .send_xchar = uart_send_xchar,
+ .set_termios = uart_set_termios,
+ .stop = uart_stop,
+ .start = uart_start,
+ .hangup = uart_hangup,
+ .break_ctl = uart_break_ctl,
+ .wait_until_sent= uart_wait_until_sent,
+#ifdef CONFIG_PROC_FS
+ .read_proc = uart_read_proc,
+#endif
+ .tiocmget = uart_tiocmget,
+ .tiocmset = uart_tiocmset,
+};
+
+/**
+ * uart_register_driver - register a driver with the uart core layer
+ * @drv: low level driver structure
+ *
+ * Register a uart driver with the core driver. We in turn register
+ * with the tty layer, and initialise the core driver per-port state.
+ *
+ * We have a proc file in /proc/tty/driver which is named after the
+ * normal driver.
+ *
+ * drv->port should be NULL, and the per-port structures should be
+ * registered using uart_add_one_port after this call has succeeded.
+ */
+int uart_register_driver(struct uart_driver *drv)
+{
+ struct tty_driver *normal = NULL;
+ int i, retval;
+
+ BUG_ON(drv->state);
+
+ /*
+ * Maybe we should be using a slab cache for this, especially if
+ * we have a large number of ports to handle.
+ */
+ drv->state = kmalloc(sizeof(struct uart_state) * drv->nr, GFP_KERNEL);
+ retval = -ENOMEM;
+ if (!drv->state)
+ goto out;
+
+ memset(drv->state, 0, sizeof(struct uart_state) * drv->nr);
+
+ normal = alloc_tty_driver(drv->nr);
+ if (!normal)
+ goto out;
+
+ drv->tty_driver = normal;
+
+ normal->owner = drv->owner;
+ normal->driver_name = drv->driver_name;
+ normal->devfs_name = drv->devfs_name;
+ normal->name = drv->dev_name;
+ normal->major = drv->major;
+ normal->minor_start = drv->minor;
+ normal->type = TTY_DRIVER_TYPE_SERIAL;
+ normal->subtype = SERIAL_TYPE_NORMAL;
+ normal->init_termios = tty_std_termios;
+ normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ normal->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS;
+ normal->driver_state = drv;
+ tty_set_operations(normal, &uart_ops);
+
+ /*
+ * Initialise the UART state(s).
+ */
+ for (i = 0; i < drv->nr; i++) {
+ struct uart_state *state = drv->state + i;
+
+ state->close_delay = 500; /* .5 seconds */
+ state->closing_wait = 30000; /* 30 seconds */
+
+ init_MUTEX(&state->sem);
+ }
+
+ retval = tty_register_driver(normal);
+ out:
+ if (retval < 0) {
+ put_tty_driver(normal);
+ kfree(drv->state);
+ }
+ return retval;
+}
+
+/**
+ * uart_unregister_driver - remove a driver from the uart core layer
+ * @drv: low level driver structure
+ *
+ * Remove all references to a driver from the core driver. The low
+ * level driver must have removed all its ports via the
+ * uart_remove_one_port() if it registered them with uart_add_one_port().
+ * (ie, drv->port == NULL)
+ */
+void uart_unregister_driver(struct uart_driver *drv)
+{
+ struct tty_driver *p = drv->tty_driver;
+ tty_unregister_driver(p);
+ put_tty_driver(p);
+ kfree(drv->state);
+ drv->tty_driver = NULL;
+}
+
+struct tty_driver *uart_console_device(struct console *co, int *index)
+{
+ struct uart_driver *p = co->data;
+ *index = co->index;
+ return p->tty_driver;
+}
+
+/**
+ * uart_add_one_port - attach a driver-defined port structure
+ * @drv: pointer to the uart low level driver structure for this port
+ * @port: uart port structure to use for this port.
+ *
+ * This allows the driver to register its own uart_port structure
+ * with the core driver. The main purpose is to allow the low
+ * level uart drivers to expand uart_port, rather than having yet
+ * more levels of structures.
+ */
+int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
+{
+ struct uart_state *state;
+ int ret = 0;
+
+ BUG_ON(in_interrupt());
+
+ if (port->line >= drv->nr)
+ return -EINVAL;
+
+ state = drv->state + port->line;
+
+ down(&port_sem);
+ if (state->port) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ state->port = port;
+
+ spin_lock_init(&port->lock);
+ port->cons = drv->cons;
+ port->info = state->info;
+
+ uart_configure_port(drv, state, port);
+
+ /*
+ * Register the port whether it's detected or not. This allows
+ * setserial to be used to alter this ports parameters.
+ */
+ tty_register_device(drv->tty_driver, port->line, port->dev);
+
+ /*
+ * If this driver supports console, and it hasn't been
+ * successfully registered yet, try to re-register it.
+ * It may be that the port was not available.
+ */
+ if (port->type != PORT_UNKNOWN &&
+ port->cons && !(port->cons->flags & CON_ENABLED))
+ register_console(port->cons);
+
+ out:
+ up(&port_sem);
+
+ return ret;
+}
+
+/**
+ * uart_remove_one_port - detach a driver defined port structure
+ * @drv: pointer to the uart low level driver structure for this port
+ * @port: uart port structure for this port
+ *
+ * This unhooks (and hangs up) the specified port structure from the
+ * core driver. No further calls will be made to the low-level code
+ * for this port.
+ */
+int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port)
+{
+ struct uart_state *state = drv->state + port->line;
+
+ BUG_ON(in_interrupt());
+
+ if (state->port != port)
+ printk(KERN_ALERT "Removing wrong port: %p != %p\n",
+ state->port, port);
+
+ down(&port_sem);
+
+ /*
+ * Remove the devices from devfs
+ */
+ tty_unregister_device(drv->tty_driver, port->line);
+
+ uart_unconfigure_port(drv, state);
+ state->port = NULL;
+ up(&port_sem);
+
+ return 0;
+}
+
+/*
+ * Are the two ports equivalent?
+ */
+int uart_match_port(struct uart_port *port1, struct uart_port *port2)
+{
+ if (port1->iotype != port2->iotype)
+ return 0;
+
+ switch (port1->iotype) {
+ case UPIO_PORT:
+ return (port1->iobase == port2->iobase);
+ case UPIO_HUB6:
+ return (port1->iobase == port2->iobase) &&
+ (port1->hub6 == port2->hub6);
+ case UPIO_MEM:
+ return (port1->membase == port2->membase);
+ }
+ return 0;
+}
+EXPORT_SYMBOL(uart_match_port);
+
+/*
+ * Try to find an unused uart_state slot for a port.
+ */
+static struct uart_state *
+uart_find_match_or_unused(struct uart_driver *drv, struct uart_port *port)
+{
+ int i;
+
+ /*
+ * First, find a port entry which matches. Note: if we do
+ * find a matching entry, and it has a non-zero use count,
+ * then we can't register the port.
+ */
+ for (i = 0; i < drv->nr; i++)
+ if (uart_match_port(drv->state[i].port, port))
+ return &drv->state[i];
+
+ /*
+ * We didn't find a matching entry, so look for the first
+ * free entry. We look for one which hasn't been previously
+ * used (indicated by zero iobase).
+ */
+ for (i = 0; i < drv->nr; i++)
+ if (drv->state[i].port->type == PORT_UNKNOWN &&
+ drv->state[i].port->iobase == 0 &&
+ drv->state[i].count == 0)
+ return &drv->state[i];
+
+ /*
+ * That also failed. Last resort is to find any currently
+ * entry which doesn't have a real port associated with it.
+ */
+ for (i = 0; i < drv->nr; i++)
+ if (drv->state[i].port->type == PORT_UNKNOWN &&
+ drv->state[i].count == 0)
+ return &drv->state[i];
+
+ return NULL;
+}
+
+/**
+ * uart_register_port: register uart settings with a port
+ * @drv: pointer to the uart low level driver structure for this port
+ * @port: uart port structure describing the port
+ *
+ * Register UART settings with the specified low level driver. Detect
+ * the type of the port if UPF_BOOT_AUTOCONF is set, and detect the
+ * IRQ if UPF_AUTO_IRQ is set.
+ *
+ * We try to pick the same port for the same IO base address, so that
+ * when a modem is plugged in, unplugged and plugged back in, it gets
+ * allocated the same port.
+ *
+ * Returns negative error, or positive line number.
+ */
+int uart_register_port(struct uart_driver *drv, struct uart_port *port)
+{
+ struct uart_state *state;
+ int ret;
+
+ down(&port_sem);
+
+ state = uart_find_match_or_unused(drv, port);
+
+ if (state) {
+ /*
+ * Ok, we've found a line that we can use.
+ *
+ * If we find a port that matches this one, and it appears
+ * to be in-use (even if it doesn't have a type) we shouldn't
+ * alter it underneath itself - the port may be open and
+ * trying to do useful work.
+ */
+ if (uart_users(state) != 0) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ /*
+ * If the port is already initialised, don't touch it.
+ */
+ if (state->port->type == PORT_UNKNOWN) {
+ state->port->iobase = port->iobase;
+ state->port->membase = port->membase;
+ state->port->irq = port->irq;
+ state->port->uartclk = port->uartclk;
+ state->port->fifosize = port->fifosize;
+ state->port->regshift = port->regshift;
+ state->port->iotype = port->iotype;
+ state->port->flags = port->flags;
+ state->port->line = state - drv->state;
+ state->port->mapbase = port->mapbase;
+
+ uart_configure_port(drv, state, state->port);
+ }
+
+ ret = state->port->line;
+ } else
+ ret = -ENOSPC;
+ out:
+ up(&port_sem);
+ return ret;
+}
+
+/**
+ * uart_unregister_port - de-allocate a port
+ * @drv: pointer to the uart low level driver structure for this port
+ * @line: line index previously returned from uart_register_port()
+ *
+ * Hang up the specified line associated with the low level driver,
+ * and mark the port as unused.
+ */
+void uart_unregister_port(struct uart_driver *drv, int line)
+{
+ struct uart_state *state;
+
+ if (line < 0 || line >= drv->nr) {
+ printk(KERN_ERR "Attempt to unregister ");
+ printk("%s%d", drv->dev_name, line);
+ printk("\n");
+ return;
+ }
+
+ state = drv->state + line;
+
+ down(&port_sem);
+ uart_unconfigure_port(drv, state);
+ up(&port_sem);
+}
+
+EXPORT_SYMBOL(uart_write_wakeup);
+EXPORT_SYMBOL(uart_register_driver);
+EXPORT_SYMBOL(uart_unregister_driver);
+EXPORT_SYMBOL(uart_suspend_port);
+EXPORT_SYMBOL(uart_resume_port);
+EXPORT_SYMBOL(uart_register_port);
+EXPORT_SYMBOL(uart_unregister_port);
+EXPORT_SYMBOL(uart_add_one_port);
+EXPORT_SYMBOL(uart_remove_one_port);
+
+MODULE_DESCRIPTION("Serial driver core");
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
new file mode 100644
index 00000000000..9034f9ad37c
--- /dev/null
+++ b/drivers/serial/serial_cs.c
@@ -0,0 +1,747 @@
+/*======================================================================
+
+ A driver for PCMCIA serial devices
+
+ serial_cs.c 1.134 2002/05/04 05:48:53
+
+ The contents of this file are subject to the Mozilla Public
+ License Version 1.1 (the "License"); you may not use this file
+ except in compliance with the License. You may obtain a copy of
+ the License at http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS
+ IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ implied. See the License for the specific language governing
+ rights and limitations under the License.
+
+ The initial developer of the original code is David A. Hinds
+ <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
+ are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
+
+ Alternatively, the contents of this file may be used under the
+ terms of the GNU General Public License version 2 (the "GPL"), in which
+ case the provisions of the GPL are applicable instead of the
+ above. If you wish to allow the use of your version of this file
+ only under the terms of the GPL and not to allow others to use
+ your version of this file under the MPL, indicate your decision
+ by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL. If you do not delete
+ the provisions above, a recipient may use your version of this
+ file under either the MPL or the GPL.
+
+======================================================================*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/serial_core.h>
+#include <linux/major.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+#include <pcmcia/version.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ciscode.h>
+#include <pcmcia/ds.h>
+#include <pcmcia/cisreg.h>
+
+#include "8250.h"
+
+#ifdef PCMCIA_DEBUG
+static int pc_debug = PCMCIA_DEBUG;
+module_param(pc_debug, int, 0644);
+#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
+static char *version = "serial_cs.c 1.134 2002/05/04 05:48:53 (David Hinds)";
+#else
+#define DEBUG(n, args...)
+#endif
+
+/*====================================================================*/
+
+/* Parameters that can be set with 'insmod' */
+
+/* Enable the speaker? */
+static int do_sound = 1;
+/* Skip strict UART tests? */
+static int buggy_uart;
+
+module_param(do_sound, int, 0444);
+module_param(buggy_uart, int, 0444);
+
+/*====================================================================*/
+
+/* Table of multi-port card ID's */
+
+struct multi_id {
+ u_short manfid;
+ u_short prodid;
+ int multi; /* 1 = multifunction, > 1 = # ports */
+};
+
+static struct multi_id multi_id[] = {
+ { MANFID_OMEGA, PRODID_OMEGA_QSP_100, 4 },
+ { MANFID_QUATECH, PRODID_QUATECH_DUAL_RS232, 2 },
+ { MANFID_QUATECH, PRODID_QUATECH_DUAL_RS232_D1, 2 },
+ { MANFID_QUATECH, PRODID_QUATECH_QUAD_RS232, 4 },
+ { MANFID_SOCKET, PRODID_SOCKET_DUAL_RS232, 2 },
+ { MANFID_INTEL, PRODID_INTEL_DUAL_RS232, 2 },
+ { MANFID_NATINST, PRODID_NATINST_QUAD_RS232, 4 }
+};
+#define MULTI_COUNT (sizeof(multi_id)/sizeof(struct multi_id))
+
+struct serial_info {
+ dev_link_t link;
+ int ndev;
+ int multi;
+ int slave;
+ int manfid;
+ dev_node_t node[4];
+ int line[4];
+};
+
+static void serial_config(dev_link_t * link);
+static int serial_event(event_t event, int priority,
+ event_callback_args_t * args);
+
+static dev_info_t dev_info = "serial_cs";
+
+static dev_link_t *serial_attach(void);
+static void serial_detach(dev_link_t *);
+
+static dev_link_t *dev_list = NULL;
+
+/*======================================================================
+
+ After a card is removed, serial_remove() will unregister
+ the serial device(s), and release the PCMCIA configuration.
+
+======================================================================*/
+
+static void serial_remove(dev_link_t *link)
+{
+ struct serial_info *info = link->priv;
+ int i;
+
+ link->state &= ~DEV_PRESENT;
+
+ DEBUG(0, "serial_release(0x%p)\n", link);
+
+ /*
+ * Recheck to see if the device is still configured.
+ */
+ if (info->link.state & DEV_CONFIG) {
+ for (i = 0; i < info->ndev; i++)
+ serial8250_unregister_port(info->line[i]);
+
+ info->link.dev = NULL;
+
+ if (!info->slave) {
+ pcmcia_release_configuration(info->link.handle);
+ pcmcia_release_io(info->link.handle, &info->link.io);
+ pcmcia_release_irq(info->link.handle, &info->link.irq);
+ }
+
+ info->link.state &= ~DEV_CONFIG;
+ }
+}
+
+static void serial_suspend(dev_link_t *link)
+{
+ link->state |= DEV_SUSPEND;
+
+ if (link->state & DEV_CONFIG) {
+ struct serial_info *info = link->priv;
+ int i;
+
+ for (i = 0; i < info->ndev; i++)
+ serial8250_suspend_port(info->line[i]);
+
+ if (!info->slave)
+ pcmcia_release_configuration(link->handle);
+ }
+}
+
+static void serial_resume(dev_link_t *link)
+{
+ link->state &= ~DEV_SUSPEND;
+
+ if (DEV_OK(link)) {
+ struct serial_info *info = link->priv;
+ int i;
+
+ if (!info->slave)
+ pcmcia_request_configuration(link->handle, &link->conf);
+
+ for (i = 0; i < info->ndev; i++)
+ serial8250_resume_port(info->line[i]);
+ }
+}
+
+/*======================================================================
+
+ serial_attach() creates an "instance" of the driver, allocating
+ local data structures for one device. The device is registered
+ with Card Services.
+
+======================================================================*/
+
+static dev_link_t *serial_attach(void)
+{
+ struct serial_info *info;
+ client_reg_t client_reg;
+ dev_link_t *link;
+ int ret;
+
+ DEBUG(0, "serial_attach()\n");
+
+ /* Create new serial device */
+ info = kmalloc(sizeof (*info), GFP_KERNEL);
+ if (!info)
+ return NULL;
+ memset(info, 0, sizeof (*info));
+ link = &info->link;
+ link->priv = info;
+
+ link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ link->io.NumPorts1 = 8;
+ link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+ link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+ link->conf.Attributes = CONF_ENABLE_IRQ;
+ if (do_sound) {
+ link->conf.Attributes |= CONF_ENABLE_SPKR;
+ link->conf.Status = CCSR_AUDIO_ENA;
+ }
+ link->conf.IntType = INT_MEMORY_AND_IO;
+
+ /* Register with Card Services */
+ link->next = dev_list;
+ dev_list = link;
+ client_reg.dev_info = &dev_info;
+ client_reg.EventMask =
+ CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
+ CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
+ CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
+ client_reg.event_handler = &serial_event;
+ client_reg.Version = 0x0210;
+ client_reg.event_callback_args.client_data = link;
+ ret = pcmcia_register_client(&link->handle, &client_reg);
+ if (ret != CS_SUCCESS) {
+ cs_error(link->handle, RegisterClient, ret);
+ serial_detach(link);
+ return NULL;
+ }
+
+ return link;
+}
+
+/*======================================================================
+
+ This deletes a driver "instance". The device is de-registered
+ with Card Services. If it has been released, all local data
+ structures are freed. Otherwise, the structures will be freed
+ when the device is released.
+
+======================================================================*/
+
+static void serial_detach(dev_link_t * link)
+{
+ struct serial_info *info = link->priv;
+ dev_link_t **linkp;
+ int ret;
+
+ DEBUG(0, "serial_detach(0x%p)\n", link);
+
+ /* Locate device structure */
+ for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
+ if (*linkp == link)
+ break;
+ if (*linkp == NULL)
+ return;
+
+ /*
+ * Ensure any outstanding scheduled tasks are completed.
+ */
+ flush_scheduled_work();
+
+ /*
+ * Ensure that the ports have been released.
+ */
+ serial_remove(link);
+
+ if (link->handle) {
+ ret = pcmcia_deregister_client(link->handle);
+ if (ret != CS_SUCCESS)
+ cs_error(link->handle, DeregisterClient, ret);
+ }
+
+ /* Unlink device structure, free bits */
+ *linkp = link->next;
+ kfree(info);
+}
+
+/*====================================================================*/
+
+static int setup_serial(client_handle_t handle, struct serial_info * info,
+ kio_addr_t iobase, int irq)
+{
+ struct uart_port port;
+ int line;
+
+ memset(&port, 0, sizeof (struct uart_port));
+ port.iobase = iobase;
+ port.irq = irq;
+ port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
+ port.uartclk = 1843200;
+ port.dev = &handle_to_dev(handle);
+ if (buggy_uart)
+ port.flags |= UPF_BUGGY_UART;
+ line = serial8250_register_port(&port);
+ if (line < 0) {
+ printk(KERN_NOTICE "serial_cs: serial8250_register_port() at "
+ "0x%04lx, irq %d failed\n", (u_long)iobase, irq);
+ return -EINVAL;
+ }
+
+ info->line[info->ndev] = line;
+ sprintf(info->node[info->ndev].dev_name, "ttyS%d", line);
+ info->node[info->ndev].major = TTY_MAJOR;
+ info->node[info->ndev].minor = 0x40 + line;
+ if (info->ndev > 0)
+ info->node[info->ndev - 1].next = &info->node[info->ndev];
+ info->ndev++;
+
+ return 0;
+}
+
+/*====================================================================*/
+
+static int
+first_tuple(client_handle_t handle, tuple_t * tuple, cisparse_t * parse)
+{
+ int i;
+ i = pcmcia_get_first_tuple(handle, tuple);
+ if (i != CS_SUCCESS)
+ return CS_NO_MORE_ITEMS;
+ i = pcmcia_get_tuple_data(handle, tuple);
+ if (i != CS_SUCCESS)
+ return i;
+ return pcmcia_parse_tuple(handle, tuple, parse);
+}
+
+static int
+next_tuple(client_handle_t handle, tuple_t * tuple, cisparse_t * parse)
+{
+ int i;
+ i = pcmcia_get_next_tuple(handle, tuple);
+ if (i != CS_SUCCESS)
+ return CS_NO_MORE_ITEMS;
+ i = pcmcia_get_tuple_data(handle, tuple);
+ if (i != CS_SUCCESS)
+ return i;
+ return pcmcia_parse_tuple(handle, tuple, parse);
+}
+
+/*====================================================================*/
+
+static int simple_config(dev_link_t *link)
+{
+ static kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
+ static int size_table[2] = { 8, 16 };
+ client_handle_t handle = link->handle;
+ struct serial_info *info = link->priv;
+ tuple_t tuple;
+ u_char buf[256];
+ cisparse_t parse;
+ cistpl_cftable_entry_t *cf = &parse.cftable_entry;
+ config_info_t config;
+ int i, j, try;
+ int s;
+
+ /* If the card is already configured, look up the port and irq */
+ i = pcmcia_get_configuration_info(handle, &config);
+ if ((i == CS_SUCCESS) && (config.Attributes & CONF_VALID_CLIENT)) {
+ kio_addr_t port = 0;
+ if ((config.BasePort2 != 0) && (config.NumPorts2 == 8)) {
+ port = config.BasePort2;
+ info->slave = 1;
+ } else if ((info->manfid == MANFID_OSITECH) &&
+ (config.NumPorts1 == 0x40)) {
+ port = config.BasePort1 + 0x28;
+ info->slave = 1;
+ }
+ if (info->slave)
+ return setup_serial(handle, info, port, config.AssignedIRQ);
+ }
+ link->conf.Vcc = config.Vcc;
+
+ /* First pass: look for a config entry that looks normal. */
+ tuple.TupleData = (cisdata_t *) buf;
+ tuple.TupleOffset = 0;
+ tuple.TupleDataMax = 255;
+ tuple.Attributes = 0;
+ tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
+ /* Two tries: without IO aliases, then with aliases */
+ for (s = 0; s < 2; s++) {
+ for (try = 0; try < 2; try++) {
+ i = first_tuple(handle, &tuple, &parse);
+ while (i != CS_NO_MORE_ITEMS) {
+ if (i != CS_SUCCESS)
+ goto next_entry;
+ if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ link->conf.Vpp1 = link->conf.Vpp2 =
+ cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[s]) &&
+ (cf->io.win[0].base != 0)) {
+ link->conf.ConfigIndex = cf->index;
+ link->io.BasePort1 = cf->io.win[0].base;
+ link->io.IOAddrLines = (try == 0) ?
+ 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
+ i = pcmcia_request_io(link->handle, &link->io);
+ if (i == CS_SUCCESS)
+ goto found_port;
+ }
+next_entry:
+ i = next_tuple(handle, &tuple, &parse);
+ }
+ }
+ }
+ /* Second pass: try to find an entry that isn't picky about
+ its base address, then try to grab any standard serial port
+ address, and finally try to get any free port. */
+ i = first_tuple(handle, &tuple, &parse);
+ while (i != CS_NO_MORE_ITEMS) {
+ if ((i == CS_SUCCESS) && (cf->io.nwin > 0) &&
+ ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
+ link->conf.ConfigIndex = cf->index;
+ for (j = 0; j < 5; j++) {
+ link->io.BasePort1 = base[j];
+ link->io.IOAddrLines = base[j] ? 16 : 3;
+ i = pcmcia_request_io(link->handle, &link->io);
+ if (i == CS_SUCCESS)
+ goto found_port;
+ }
+ }
+ i = next_tuple(handle, &tuple, &parse);
+ }
+
+ found_port:
+ if (i != CS_SUCCESS) {
+ printk(KERN_NOTICE
+ "serial_cs: no usable port range found, giving up\n");
+ cs_error(link->handle, RequestIO, i);
+ return -1;
+ }
+
+ i = pcmcia_request_irq(link->handle, &link->irq);
+ if (i != CS_SUCCESS) {
+ cs_error(link->handle, RequestIRQ, i);
+ link->irq.AssignedIRQ = 0;
+ }
+ if (info->multi && (info->manfid == MANFID_3COM))
+ link->conf.ConfigIndex &= ~(0x08);
+ i = pcmcia_request_configuration(link->handle, &link->conf);
+ if (i != CS_SUCCESS) {
+ cs_error(link->handle, RequestConfiguration, i);
+ return -1;
+ }
+
+ return setup_serial(handle, info, link->io.BasePort1, link->irq.AssignedIRQ);
+}
+
+static int multi_config(dev_link_t * link)
+{
+ client_handle_t handle = link->handle;
+ struct serial_info *info = link->priv;
+ tuple_t tuple;
+ u_char buf[256];
+ cisparse_t parse;
+ cistpl_cftable_entry_t *cf = &parse.cftable_entry;
+ config_info_t config;
+ int i, base2 = 0;
+
+ i = pcmcia_get_configuration_info(handle, &config);
+ if (i != CS_SUCCESS) {
+ cs_error(handle, GetConfigurationInfo, i);
+ return -1;
+ }
+ link->conf.Vcc = config.Vcc;
+
+ tuple.TupleData = (cisdata_t *) buf;
+ tuple.TupleOffset = 0;
+ tuple.TupleDataMax = 255;
+ tuple.Attributes = 0;
+ tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
+
+ /* First, look for a generic full-sized window */
+ link->io.NumPorts1 = info->multi * 8;
+ i = first_tuple(handle, &tuple, &parse);
+ while (i != CS_NO_MORE_ITEMS) {
+ /* The quad port cards have bad CIS's, so just look for a
+ window larger than 8 ports and assume it will be right */
+ if ((i == CS_SUCCESS) && (cf->io.nwin == 1) &&
+ (cf->io.win[0].len > 8)) {
+ link->conf.ConfigIndex = cf->index;
+ link->io.BasePort1 = cf->io.win[0].base;
+ link->io.IOAddrLines =
+ cf->io.flags & CISTPL_IO_LINES_MASK;
+ i = pcmcia_request_io(link->handle, &link->io);
+ base2 = link->io.BasePort1 + 8;
+ if (i == CS_SUCCESS)
+ break;
+ }
+ i = next_tuple(handle, &tuple, &parse);
+ }
+
+ /* If that didn't work, look for two windows */
+ if (i != CS_SUCCESS) {
+ link->io.NumPorts1 = link->io.NumPorts2 = 8;
+ info->multi = 2;
+ i = first_tuple(handle, &tuple, &parse);
+ while (i != CS_NO_MORE_ITEMS) {
+ if ((i == CS_SUCCESS) && (cf->io.nwin == 2)) {
+ link->conf.ConfigIndex = cf->index;
+ link->io.BasePort1 = cf->io.win[0].base;
+ link->io.BasePort2 = cf->io.win[1].base;
+ link->io.IOAddrLines =
+ cf->io.flags & CISTPL_IO_LINES_MASK;
+ i = pcmcia_request_io(link->handle, &link->io);
+ base2 = link->io.BasePort2;
+ if (i == CS_SUCCESS)
+ break;
+ }
+ i = next_tuple(handle, &tuple, &parse);
+ }
+ }
+
+ if (i != CS_SUCCESS) {
+ cs_error(link->handle, RequestIO, i);
+ return -1;
+ }
+
+ i = pcmcia_request_irq(link->handle, &link->irq);
+ if (i != CS_SUCCESS) {
+ printk(KERN_NOTICE
+ "serial_cs: no usable port range found, giving up\n");
+ cs_error(link->handle, RequestIRQ, i);
+ link->irq.AssignedIRQ = 0;
+ }
+ /* Socket Dual IO: this enables irq's for second port */
+ if (info->multi && (info->manfid == MANFID_SOCKET)) {
+ link->conf.Present |= PRESENT_EXT_STATUS;
+ link->conf.ExtStatus = ESR_REQ_ATTN_ENA;
+ }
+ i = pcmcia_request_configuration(link->handle, &link->conf);
+ if (i != CS_SUCCESS) {
+ cs_error(link->handle, RequestConfiguration, i);
+ return -1;
+ }
+
+ /* The Oxford Semiconductor OXCF950 cards are in fact single-port:
+ 8 registers are for the UART, the others are extra registers */
+ if (info->manfid == MANFID_OXSEMI) {
+ if (cf->index == 1 || cf->index == 3) {
+ setup_serial(handle, info, base2, link->irq.AssignedIRQ);
+ outb(12, link->io.BasePort1 + 1);
+ } else {
+ setup_serial(handle, info, link->io.BasePort1, link->irq.AssignedIRQ);
+ outb(12, base2 + 1);
+ }
+ return 0;
+ }
+
+ setup_serial(handle, info, link->io.BasePort1, link->irq.AssignedIRQ);
+ /* The Nokia cards are not really multiport cards */
+ if (info->manfid == MANFID_NOKIA)
+ return 0;
+ for (i = 0; i < info->multi - 1; i++)
+ setup_serial(handle, info, base2 + (8 * i), link->irq.AssignedIRQ);
+
+ return 0;
+}
+
+/*======================================================================
+
+ serial_config() is scheduled to run after a CARD_INSERTION event
+ is received, to configure the PCMCIA socket, and to make the
+ serial device available to the system.
+
+======================================================================*/
+
+void serial_config(dev_link_t * link)
+{
+ client_handle_t handle = link->handle;
+ struct serial_info *info = link->priv;
+ tuple_t tuple;
+ u_short buf[128];
+ cisparse_t parse;
+ cistpl_cftable_entry_t *cf = &parse.cftable_entry;
+ int i, last_ret, last_fn;
+
+ DEBUG(0, "serial_config(0x%p)\n", link);
+
+ tuple.TupleData = (cisdata_t *) buf;
+ tuple.TupleOffset = 0;
+ tuple.TupleDataMax = 255;
+ tuple.Attributes = 0;
+ /* Get configuration register information */
+ tuple.DesiredTuple = CISTPL_CONFIG;
+ last_ret = first_tuple(handle, &tuple, &parse);
+ if (last_ret != CS_SUCCESS) {
+ last_fn = ParseTuple;
+ goto cs_failed;
+ }
+ link->conf.ConfigBase = parse.config.base;
+ link->conf.Present = parse.config.rmask[0];
+
+ /* Configure card */
+ link->state |= DEV_CONFIG;
+
+ /* Is this a compliant multifunction card? */
+ tuple.DesiredTuple = CISTPL_LONGLINK_MFC;
+ tuple.Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK;
+ info->multi = (first_tuple(handle, &tuple, &parse) == CS_SUCCESS);
+
+ /* Is this a multiport card? */
+ tuple.DesiredTuple = CISTPL_MANFID;
+ if (first_tuple(handle, &tuple, &parse) == CS_SUCCESS) {
+ info->manfid = le16_to_cpu(buf[0]);
+ for (i = 0; i < MULTI_COUNT; i++)
+ if ((info->manfid == multi_id[i].manfid) &&
+ (le16_to_cpu(buf[1]) == multi_id[i].prodid))
+ break;
+ if (i < MULTI_COUNT)
+ info->multi = multi_id[i].multi;
+ }
+
+ /* Another check for dual-serial cards: look for either serial or
+ multifunction cards that ask for appropriate IO port ranges */
+ tuple.DesiredTuple = CISTPL_FUNCID;
+ if ((info->multi == 0) &&
+ ((first_tuple(handle, &tuple, &parse) != CS_SUCCESS) ||
+ (parse.funcid.func == CISTPL_FUNCID_MULTI) ||
+ (parse.funcid.func == CISTPL_FUNCID_SERIAL))) {
+ tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
+ if (first_tuple(handle, &tuple, &parse) == CS_SUCCESS) {
+ if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
+ info->multi = cf->io.win[0].len >> 3;
+ if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
+ (cf->io.win[1].len == 8))
+ info->multi = 2;
+ }
+ }
+
+ if (info->multi > 1)
+ multi_config(link);
+ else
+ simple_config(link);
+
+ if (info->ndev == 0)
+ goto failed;
+
+ if (info->manfid == MANFID_IBM) {
+ conf_reg_t reg = { 0, CS_READ, 0x800, 0 };
+ last_ret = pcmcia_access_configuration_register(link->handle, &reg);
+ if (last_ret) {
+ last_fn = AccessConfigurationRegister;
+ goto cs_failed;
+ }
+ reg.Action = CS_WRITE;
+ reg.Value = reg.Value | 1;
+ last_ret = pcmcia_access_configuration_register(link->handle, &reg);
+ if (last_ret) {
+ last_fn = AccessConfigurationRegister;
+ goto cs_failed;
+ }
+ }
+
+ link->dev = &info->node[0];
+ link->state &= ~DEV_CONFIG_PENDING;
+ return;
+
+ cs_failed:
+ cs_error(link->handle, last_fn, last_ret);
+ failed:
+ serial_remove(link);
+ link->state &= ~DEV_CONFIG_PENDING;
+}
+
+/*======================================================================
+
+ The card status event handler. Mostly, this schedules other
+ stuff to run after an event is received. A CARD_REMOVAL event
+ also sets some flags to discourage the serial drivers from
+ talking to the ports.
+
+======================================================================*/
+
+static int
+serial_event(event_t event, int priority, event_callback_args_t * args)
+{
+ dev_link_t *link = args->client_data;
+ struct serial_info *info = link->priv;
+
+ DEBUG(1, "serial_event(0x%06x)\n", event);
+
+ switch (event) {
+ case CS_EVENT_CARD_REMOVAL:
+ serial_remove(link);
+ break;
+
+ case CS_EVENT_CARD_INSERTION:
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ serial_config(link);
+ break;
+
+ case CS_EVENT_PM_SUSPEND:
+ serial_suspend(link);
+ break;
+
+ case CS_EVENT_RESET_PHYSICAL:
+ if ((link->state & DEV_CONFIG) && !info->slave)
+ pcmcia_release_configuration(link->handle);
+ break;
+
+ case CS_EVENT_PM_RESUME:
+ serial_resume(link);
+ break;
+
+ case CS_EVENT_CARD_RESET:
+ if (DEV_OK(link) && !info->slave)
+ pcmcia_request_configuration(link->handle, &link->conf);
+ break;
+ }
+ return 0;
+}
+
+static struct pcmcia_driver serial_cs_driver = {
+ .owner = THIS_MODULE,
+ .drv = {
+ .name = "serial_cs",
+ },
+ .attach = serial_attach,
+ .detach = serial_detach,
+};
+
+static int __init init_serial_cs(void)
+{
+ return pcmcia_register_driver(&serial_cs_driver);
+}
+
+static void __exit exit_serial_cs(void)
+{
+ pcmcia_unregister_driver(&serial_cs_driver);
+ BUG_ON(dev_list != NULL);
+}
+
+module_init(init_serial_cs);
+module_exit(exit_serial_cs);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c
new file mode 100644
index 00000000000..4ce3a41f161
--- /dev/null
+++ b/drivers/serial/serial_lh7a40x.c
@@ -0,0 +1,711 @@
+/* drivers/serial/serial_lh7a40x.c
+ *
+ * Copyright (C) 2004 Coastal Environmental Systems
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ */
+
+/* Driver for Sharp LH7A40X embedded serial ports
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ * Based on drivers/serial/amba.c, by Deep Blue Solutions Ltd.
+ *
+ * ---
+ *
+ * This driver supports the embedded UARTs of the Sharp LH7A40X series
+ * CPUs. While similar to the 16550 and other UART chips, there is
+ * nothing close to register compatibility. Moreover, some of the
+ * modem control lines are not available, either in the chip or they
+ * are lacking in the board-level implementation.
+ *
+ * - Use of SIRDIS
+ * For simplicity, we disable the IR functions of any UART whenever
+ * we enable it.
+ *
+ */
+
+#include <linux/config.h>
+
+#if defined(CONFIG_SERIAL_LH7A40X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#define DEV_MAJOR 204
+#define DEV_MINOR 16
+#define DEV_NR 3
+
+#define ISR_LOOP_LIMIT 256
+
+#define UR(p,o) _UR ((p)->membase, o)
+#define _UR(b,o) (*((volatile unsigned int*)(((unsigned char*) b) + (o))))
+#define BIT_CLR(p,o,m) UR(p,o) = UR(p,o) & (~(unsigned int)m)
+#define BIT_SET(p,o,m) UR(p,o) = UR(p,o) | ( (unsigned int)m)
+
+#define UART_REG_SIZE 32
+
+#define UART_R_DATA (0x00)
+#define UART_R_FCON (0x04)
+#define UART_R_BRCON (0x08)
+#define UART_R_CON (0x0c)
+#define UART_R_STATUS (0x10)
+#define UART_R_RAWISR (0x14)
+#define UART_R_INTEN (0x18)
+#define UART_R_ISR (0x1c)
+
+#define UARTEN (0x01) /* UART enable */
+#define SIRDIS (0x02) /* Serial IR disable (UART1 only) */
+
+#define RxEmpty (0x10)
+#define TxEmpty (0x80)
+#define TxFull (0x20)
+#define nRxRdy RxEmpty
+#define nTxRdy TxFull
+#define TxBusy (0x08)
+
+#define RxBreak (0x0800)
+#define RxOverrunError (0x0400)
+#define RxParityError (0x0200)
+#define RxFramingError (0x0100)
+#define RxError (RxBreak | RxOverrunError | RxParityError | RxFramingError)
+
+#define DCD (0x04)
+#define DSR (0x02)
+#define CTS (0x01)
+
+#define RxInt (0x01)
+#define TxInt (0x02)
+#define ModemInt (0x04)
+#define RxTimeoutInt (0x08)
+
+#define MSEOI (0x10)
+
+#define WLEN_8 (0x60)
+#define WLEN_7 (0x40)
+#define WLEN_6 (0x20)
+#define WLEN_5 (0x00)
+#define WLEN (0x60) /* Mask for all word-length bits */
+#define STP2 (0x08)
+#define PEN (0x02) /* Parity Enable */
+#define EPS (0x04) /* Even Parity Set */
+#define FEN (0x10) /* FIFO Enable */
+#define BRK (0x01) /* Send Break */
+
+
+struct uart_port_lh7a40x {
+ struct uart_port port;
+ unsigned int statusPrev; /* Most recently read modem status */
+};
+
+static void lh7a40xuart_stop_tx (struct uart_port* port, unsigned int tty_stop)
+{
+ BIT_CLR (port, UART_R_INTEN, TxInt);
+}
+
+static void lh7a40xuart_start_tx (struct uart_port* port,
+ unsigned int tty_start)
+{
+ BIT_SET (port, UART_R_INTEN, TxInt);
+
+ /* *** FIXME: do I need to check for startup of the
+ transmitter? The old driver did, but AMBA
+ doesn't . */
+}
+
+static void lh7a40xuart_stop_rx (struct uart_port* port)
+{
+ BIT_SET (port, UART_R_INTEN, RxTimeoutInt | RxInt);
+}
+
+static void lh7a40xuart_enable_ms (struct uart_port* port)
+{
+ BIT_SET (port, UART_R_INTEN, ModemInt);
+}
+
+static void
+#ifdef SUPPORT_SYSRQ
+lh7a40xuart_rx_chars (struct uart_port* port, struct pt_regs* regs)
+#else
+lh7a40xuart_rx_chars (struct uart_port* port)
+#endif
+{
+ struct tty_struct* tty = port->info->tty;
+ int cbRxMax = 256; /* (Gross) limit on receive */
+ unsigned int data, flag;/* Received data and status */
+
+ while (!(UR (port, UART_R_STATUS) & nRxRdy) && --cbRxMax) {
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
+ if (tty->low_latency)
+ tty_flip_buffer_push(tty);
+ /*
+ * If this failed then we will throw away the
+ * bytes but must do so to clear interrupts
+ */
+ }
+
+ data = UR (port, UART_R_DATA);
+ flag = TTY_NORMAL;
+ ++port->icount.rx;
+
+ if (data & RxError) { /* Quick check, short-circuit */
+ if (data & RxBreak) {
+ data &= ~(RxFramingError | RxParityError);
+ ++port->icount.brk;
+ if (uart_handle_break (port))
+ continue;
+ }
+ else if (data & RxParityError)
+ ++port->icount.parity;
+ else if (data & RxFramingError)
+ ++port->icount.frame;
+ if (data & RxOverrunError)
+ ++port->icount.overrun;
+
+ /* Mask by termios, leave Rx'd byte */
+ data &= port->read_status_mask | 0xff;
+
+ if (data & RxBreak)
+ flag = TTY_BREAK;
+ else if (data & RxParityError)
+ flag = TTY_PARITY;
+ else if (data & RxFramingError)
+ flag = TTY_FRAME;
+ }
+
+ if (uart_handle_sysrq_char (port, (unsigned char) data, regs))
+ continue;
+
+ if ((data & port->ignore_status_mask) == 0) {
+ tty_insert_flip_char(tty, data, flag);
+ }
+ if ((data & RxOverrunError)
+ && tty->flip.count < TTY_FLIPBUF_SIZE) {
+ /*
+ * Overrun is special, since it's reported
+ * immediately, and doesn't affect the current
+ * character
+ */
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ }
+ }
+ tty_flip_buffer_push (tty);
+ return;
+}
+
+static void lh7a40xuart_tx_chars (struct uart_port* port)
+{
+ struct circ_buf* xmit = &port->info->xmit;
+ int cbTxMax = port->fifosize;
+
+ if (port->x_char) {
+ UR (port, UART_R_DATA) = port->x_char;
+ ++port->icount.tx;
+ port->x_char = 0;
+ return;
+ }
+ if (uart_circ_empty (xmit) || uart_tx_stopped (port)) {
+ lh7a40xuart_stop_tx (port, 0);
+ return;
+ }
+
+ /* Unlike the AMBA UART, the lh7a40x UART does not guarantee
+ that at least half of the FIFO is empty. Instead, we check
+ status for every character. Using the AMBA method causes
+ the transmitter to drop characters. */
+
+ do {
+ UR (port, UART_R_DATA) = xmit->buf[xmit->tail];
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ ++port->icount.tx;
+ if (uart_circ_empty(xmit))
+ break;
+ } while (!(UR (port, UART_R_STATUS) & nTxRdy)
+ && cbTxMax--);
+
+ if (uart_circ_chars_pending (xmit) < WAKEUP_CHARS)
+ uart_write_wakeup (port);
+
+ if (uart_circ_empty (xmit))
+ lh7a40xuart_stop_tx (port, 0);
+}
+
+static void lh7a40xuart_modem_status (struct uart_port* port)
+{
+ unsigned int status = UR (port, UART_R_STATUS);
+ unsigned int delta
+ = status ^ ((struct uart_port_lh7a40x*) port)->statusPrev;
+
+ BIT_SET (port, UART_R_RAWISR, MSEOI); /* Clear modem status intr */
+
+ if (!delta) /* Only happens if we missed 2 transitions */
+ return;
+
+ ((struct uart_port_lh7a40x*) port)->statusPrev = status;
+
+ if (delta & DCD)
+ uart_handle_dcd_change (port, status & DCD);
+
+ if (delta & DSR)
+ ++port->icount.dsr;
+
+ if (delta & CTS)
+ uart_handle_cts_change (port, status & CTS);
+
+ wake_up_interruptible (&port->info->delta_msr_wait);
+}
+
+static irqreturn_t lh7a40xuart_int (int irq, void* dev_id,
+ struct pt_regs* regs)
+{
+ struct uart_port* port = dev_id;
+ unsigned int cLoopLimit = ISR_LOOP_LIMIT;
+ unsigned int isr = UR (port, UART_R_ISR);
+
+
+ do {
+ if (isr & (RxInt | RxTimeoutInt))
+#ifdef SUPPORT_SYSRQ
+ lh7a40xuart_rx_chars(port, regs);
+#else
+ lh7a40xuart_rx_chars(port);
+#endif
+ if (isr & ModemInt)
+ lh7a40xuart_modem_status (port);
+ if (isr & TxInt)
+ lh7a40xuart_tx_chars (port);
+
+ if (--cLoopLimit == 0)
+ break;
+
+ isr = UR (port, UART_R_ISR);
+ } while (isr & (RxInt | TxInt | RxTimeoutInt));
+
+ return IRQ_HANDLED;
+}
+
+static unsigned int lh7a40xuart_tx_empty (struct uart_port* port)
+{
+ return (UR (port, UART_R_STATUS) & TxEmpty) ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int lh7a40xuart_get_mctrl (struct uart_port* port)
+{
+ unsigned int result = 0;
+ unsigned int status = UR (port, UART_R_STATUS);
+
+ if (status & DCD)
+ result |= TIOCM_CAR;
+ if (status & DSR)
+ result |= TIOCM_DSR;
+ if (status & CTS)
+ result |= TIOCM_CTS;
+
+ return result;
+}
+
+static void lh7a40xuart_set_mctrl (struct uart_port* port, unsigned int mctrl)
+{
+ /* None of the ports supports DTR. UART1 supports RTS through GPIO. */
+ /* Note, kernel appears to be setting DTR and RTS on console. */
+
+ /* *** FIXME: this deserves more work. There's some work in
+ tracing all of the IO pins. */
+#if 0
+ if( port->mapbase == UART1_PHYS) {
+ gpioRegs_t *gpio = (gpioRegs_t *)IO_ADDRESS(GPIO_PHYS);
+
+ if (mctrl & TIOCM_RTS)
+ gpio->pbdr &= ~GPIOB_UART1_RTS;
+ else
+ gpio->pbdr |= GPIOB_UART1_RTS;
+ }
+#endif
+}
+
+static void lh7a40xuart_break_ctl (struct uart_port* port, int break_state)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ if (break_state == -1)
+ BIT_SET (port, UART_R_FCON, BRK); /* Assert break */
+ else
+ BIT_CLR (port, UART_R_FCON, BRK); /* Deassert break */
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int lh7a40xuart_startup (struct uart_port* port)
+{
+ int retval;
+
+ retval = request_irq (port->irq, lh7a40xuart_int, 0,
+ "serial_lh7a40x", port);
+ if (retval)
+ return retval;
+
+ /* Initial modem control-line settings */
+ ((struct uart_port_lh7a40x*) port)->statusPrev
+ = UR (port, UART_R_STATUS);
+
+ /* There is presently no configuration option to enable IR.
+ Thus, we always disable it. */
+
+ BIT_SET (port, UART_R_CON, UARTEN | SIRDIS);
+ BIT_SET (port, UART_R_INTEN, RxTimeoutInt | RxInt);
+
+ return 0;
+}
+
+static void lh7a40xuart_shutdown (struct uart_port* port)
+{
+ free_irq (port->irq, port);
+ BIT_CLR (port, UART_R_FCON, BRK | FEN);
+ BIT_CLR (port, UART_R_CON, UARTEN);
+}
+
+static void lh7a40xuart_set_termios (struct uart_port* port,
+ struct termios* termios,
+ struct termios* old)
+{
+ unsigned int con;
+ unsigned int inten;
+ unsigned int fcon;
+ unsigned long flags;
+ unsigned int baud;
+ unsigned int quot;
+
+ baud = uart_get_baud_rate (port, termios, old, 8, port->uartclk/16);
+ quot = uart_get_divisor (port, baud); /* -1 performed elsewhere */
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ fcon = WLEN_5;
+ break;
+ case CS6:
+ fcon = WLEN_6;
+ break;
+ case CS7:
+ fcon = WLEN_7;
+ break;
+ case CS8:
+ default:
+ fcon = WLEN_8;
+ break;
+ }
+ if (termios->c_cflag & CSTOPB)
+ fcon |= STP2;
+ if (termios->c_cflag & PARENB) {
+ fcon |= PEN;
+ if (!(termios->c_cflag & PARODD))
+ fcon |= EPS;
+ }
+ if (port->fifosize > 1)
+ fcon |= FEN;
+
+ spin_lock_irqsave (&port->lock, flags);
+
+ uart_update_timeout (port, termios->c_cflag, baud);
+
+ port->read_status_mask = RxOverrunError;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= RxFramingError | RxParityError;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= RxBreak;
+
+ /* Figure mask for status we ignore */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= RxFramingError | RxParityError;
+ if (termios->c_iflag & IGNBRK) {
+ port->ignore_status_mask |= RxBreak;
+ /* Ignore overrun when ignorning parity */
+ /* *** FIXME: is this in the right place? */
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= RxOverrunError;
+ }
+
+ /* Ignore all receive errors when receive disabled */
+ if ((termios->c_cflag & CREAD) == 0)
+ port->ignore_status_mask |= RxError;
+
+ con = UR (port, UART_R_CON);
+ inten = (UR (port, UART_R_INTEN) & ~ModemInt);
+
+ if (UART_ENABLE_MS (port, termios->c_cflag))
+ inten |= ModemInt;
+
+ BIT_CLR (port, UART_R_CON, UARTEN); /* Disable UART */
+ UR (port, UART_R_INTEN) = 0; /* Disable interrupts */
+ UR (port, UART_R_BRCON) = quot - 1; /* Set baud rate divisor */
+ UR (port, UART_R_FCON) = fcon; /* Set FIFO and frame ctrl */
+ UR (port, UART_R_INTEN) = inten; /* Enable interrupts */
+ UR (port, UART_R_CON) = con; /* Restore UART mode */
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char* lh7a40xuart_type (struct uart_port* port)
+{
+ return port->type == PORT_LH7A40X ? "LH7A40X" : NULL;
+}
+
+static void lh7a40xuart_release_port (struct uart_port* port)
+{
+ release_mem_region (port->mapbase, UART_REG_SIZE);
+}
+
+static int lh7a40xuart_request_port (struct uart_port* port)
+{
+ return request_mem_region (port->mapbase, UART_REG_SIZE,
+ "serial_lh7a40x") != NULL
+ ? 0 : -EBUSY;
+}
+
+static void lh7a40xuart_config_port (struct uart_port* port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE) {
+ port->type = PORT_LH7A40X;
+ lh7a40xuart_request_port (port);
+ }
+}
+
+static int lh7a40xuart_verify_port (struct uart_port* port,
+ struct serial_struct* ser)
+{
+ int ret = 0;
+
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_LH7A40X)
+ ret = -EINVAL;
+ if (ser->irq < 0 || ser->irq >= NR_IRQS)
+ ret = -EINVAL;
+ if (ser->baud_base < 9600) /* *** FIXME: is this true? */
+ ret = -EINVAL;
+ return ret;
+}
+
+static struct uart_ops lh7a40x_uart_ops = {
+ .tx_empty = lh7a40xuart_tx_empty,
+ .set_mctrl = lh7a40xuart_set_mctrl,
+ .get_mctrl = lh7a40xuart_get_mctrl,
+ .stop_tx = lh7a40xuart_stop_tx,
+ .start_tx = lh7a40xuart_start_tx,
+ .stop_rx = lh7a40xuart_stop_rx,
+ .enable_ms = lh7a40xuart_enable_ms,
+ .break_ctl = lh7a40xuart_break_ctl,
+ .startup = lh7a40xuart_startup,
+ .shutdown = lh7a40xuart_shutdown,
+ .set_termios = lh7a40xuart_set_termios,
+ .type = lh7a40xuart_type,
+ .release_port = lh7a40xuart_release_port,
+ .request_port = lh7a40xuart_request_port,
+ .config_port = lh7a40xuart_config_port,
+ .verify_port = lh7a40xuart_verify_port,
+};
+
+static struct uart_port_lh7a40x lh7a40x_ports[DEV_NR] = {
+ {
+ .port = {
+ .membase = (void*) io_p2v (UART1_PHYS),
+ .mapbase = UART1_PHYS,
+ .iotype = SERIAL_IO_MEM,
+ .irq = IRQ_UART1INTR,
+ .uartclk = 14745600/2,
+ .fifosize = 16,
+ .ops = &lh7a40x_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ },
+ {
+ .port = {
+ .membase = (void*) io_p2v (UART2_PHYS),
+ .mapbase = UART2_PHYS,
+ .iotype = SERIAL_IO_MEM,
+ .irq = IRQ_UART2INTR,
+ .uartclk = 14745600/2,
+ .fifosize = 16,
+ .ops = &lh7a40x_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 1,
+ },
+ },
+ {
+ .port = {
+ .membase = (void*) io_p2v (UART3_PHYS),
+ .mapbase = UART3_PHYS,
+ .iotype = SERIAL_IO_MEM,
+ .irq = IRQ_UART3INTR,
+ .uartclk = 14745600/2,
+ .fifosize = 16,
+ .ops = &lh7a40x_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 2,
+ },
+ },
+};
+
+#ifndef CONFIG_SERIAL_LH7A40X_CONSOLE
+# define LH7A40X_CONSOLE NULL
+#else
+# define LH7A40X_CONSOLE &lh7a40x_console
+
+
+static void lh7a40xuart_console_write (struct console* co,
+ const char* s,
+ unsigned int count)
+{
+ struct uart_port* port = &lh7a40x_ports[co->index].port;
+ unsigned int con = UR (port, UART_R_CON);
+ unsigned int inten = UR (port, UART_R_INTEN);
+
+
+ UR (port, UART_R_INTEN) = 0; /* Disable all interrupts */
+ BIT_SET (port, UART_R_CON, UARTEN | SIRDIS); /* Enable UART */
+
+ for (; count-- > 0; ++s) {
+ while (UR (port, UART_R_STATUS) & nTxRdy)
+ ;
+ UR (port, UART_R_DATA) = *s;
+ if (*s == '\n') {
+ while ((UR (port, UART_R_STATUS) & TxBusy))
+ ;
+ UR (port, UART_R_DATA) = '\r';
+ }
+ }
+
+ /* Wait until all characters are sent */
+ while (UR (port, UART_R_STATUS) & TxBusy)
+ ;
+
+ /* Restore control and interrupt mask */
+ UR (port, UART_R_CON) = con;
+ UR (port, UART_R_INTEN) = inten;
+}
+
+static void __init lh7a40xuart_console_get_options (struct uart_port* port,
+ int* baud,
+ int* parity,
+ int* bits)
+{
+ if (UR (port, UART_R_CON) & UARTEN) {
+ unsigned int fcon = UR (port, UART_R_FCON);
+ unsigned int quot = UR (port, UART_R_BRCON) + 1;
+
+ switch (fcon & (PEN | EPS)) {
+ default: *parity = 'n'; break;
+ case PEN: *parity = 'o'; break;
+ case PEN | EPS: *parity = 'e'; break;
+ }
+
+ switch (fcon & WLEN) {
+ default:
+ case WLEN_8: *bits = 8; break;
+ case WLEN_7: *bits = 7; break;
+ case WLEN_6: *bits = 6; break;
+ case WLEN_5: *bits = 5; break;
+ }
+
+ *baud = port->uartclk/(16*quot);
+ }
+}
+
+static int __init lh7a40xuart_console_setup (struct console* co, char* options)
+{
+ struct uart_port* port;
+ int baud = 38400;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (co->index >= DEV_NR) /* Bounds check on device number */
+ co->index = 0;
+ port = &lh7a40x_ports[co->index].port;
+
+ if (options)
+ uart_parse_options (options, &baud, &parity, &bits, &flow);
+ else
+ lh7a40xuart_console_get_options (port, &baud, &parity, &bits);
+
+ return uart_set_options (port, co, baud, parity, bits, flow);
+}
+
+extern struct uart_driver lh7a40x_reg;
+static struct console lh7a40x_console = {
+ .name = "ttyAM",
+ .write = lh7a40xuart_console_write,
+ .device = uart_console_device,
+ .setup = lh7a40xuart_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &lh7a40x_reg,
+};
+
+static int __init lh7a40xuart_console_init(void)
+{
+ register_console (&lh7a40x_console);
+ return 0;
+}
+
+console_initcall (lh7a40xuart_console_init);
+
+#endif
+
+static struct uart_driver lh7a40x_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "ttyAM",
+ .dev_name = "ttyAM",
+ .major = DEV_MAJOR,
+ .minor = DEV_MINOR,
+ .nr = DEV_NR,
+ .cons = LH7A40X_CONSOLE,
+};
+
+static int __init lh7a40xuart_init(void)
+{
+ int ret;
+
+ printk (KERN_INFO "serial: LH7A40X serial driver\n");
+
+ ret = uart_register_driver (&lh7a40x_reg);
+
+ if (ret == 0) {
+ int i;
+
+ for (i = 0; i < DEV_NR; i++)
+ uart_add_one_port (&lh7a40x_reg,
+ &lh7a40x_ports[i].port);
+ }
+ return ret;
+}
+
+static void __exit lh7a40xuart_exit(void)
+{
+ int i;
+
+ for (i = 0; i < DEV_NR; i++)
+ uart_remove_one_port (&lh7a40x_reg, &lh7a40x_ports[i].port);
+
+ uart_unregister_driver (&lh7a40x_reg);
+}
+
+module_init (lh7a40xuart_init);
+module_exit (lh7a40xuart_exit);
+
+MODULE_AUTHOR ("Marc Singer");
+MODULE_DESCRIPTION ("Sharp LH7A40X serial port driver");
+MODULE_LICENSE ("GPL");
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
new file mode 100644
index 00000000000..dfc987301f1
--- /dev/null
+++ b/drivers/serial/serial_txx9.c
@@ -0,0 +1,1171 @@
+/*
+ * drivers/serial/serial_txx9.c
+ *
+ * Derived from many drivers using generic_serial interface,
+ * especially serial_tx3912.c by Steven J. Hill and r39xx_serial.c
+ * (was in Linux/VR tree) by Jim Pick.
+ *
+ * Copyright (C) 1999 Harald Koerfgen
+ * Copyright (C) 2000 Jim Pick <jim@jimpick.com>
+ * Copyright (C) 2001 Steven J. Hill (sjhill@realitydiluted.com)
+ * Copyright (C) 2000-2002 Toshiba Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Serial driver for TX3927/TX4927/TX4925/TX4938 internal SIO controller
+ *
+ * Revision History:
+ * 0.30 Initial revision. (Renamed from serial_txx927.c)
+ * 0.31 Use save_flags instead of local_irq_save.
+ * 0.32 Support SCLK.
+ * 0.33 Switch TXX9_TTY_NAME by CONFIG_SERIAL_TXX9_STDSERIAL.
+ * Support TIOCSERGETLSR.
+ * 0.34 Support slow baudrate.
+ * 0.40 Merge codes from mainstream kernel (2.4.22).
+ * 0.41 Fix console checking in rs_shutdown_port().
+ * Disable flow-control in serial_console_write().
+ * 0.42 Fix minor compiler warning.
+ * 1.00 Kernel 2.6. Converted to new serial core (based on 8250.c).
+ * 1.01 Set fifosize to make tx_empry called properly.
+ * Use standard uart_get_divisor.
+ * 1.02 Cleanup. (import 8250.c changes)
+ */
+#include <linux/config.h>
+
+#if defined(CONFIG_SERIAL_TXX9_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/pci.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+static char *serial_version = "1.02";
+static char *serial_name = "TX39/49 Serial driver";
+
+#define PASS_LIMIT 256
+
+#if !defined(CONFIG_SERIAL_TXX9_STDSERIAL)
+/* "ttyS" is used for standard serial driver */
+#define TXX9_TTY_NAME "ttyTX"
+#define TXX9_TTY_DEVFS_NAME "tttx/"
+#define TXX9_TTY_MINOR_START (64 + 64) /* ttyTX0(128), ttyTX1(129) */
+#else
+/* acts like standard serial driver */
+#define TXX9_TTY_NAME "ttyS"
+#define TXX9_TTY_DEVFS_NAME "tts/"
+#define TXX9_TTY_MINOR_START 64
+#endif
+#define TXX9_TTY_MAJOR TTY_MAJOR
+
+/* flag aliases */
+#define UPF_TXX9_HAVE_CTS_LINE UPF_BUGGY_UART
+#define UPF_TXX9_USE_SCLK UPF_MAGIC_MULTIPLIER
+
+#ifdef CONFIG_PCI
+/* support for Toshiba TC86C001 SIO */
+#define ENABLE_SERIAL_TXX9_PCI
+#endif
+
+/*
+ * Number of serial ports
+ */
+#ifdef ENABLE_SERIAL_TXX9_PCI
+#define NR_PCI_BOARDS 4
+#define UART_NR (2 + NR_PCI_BOARDS)
+#else
+#define UART_NR 2
+#endif
+
+struct uart_txx9_port {
+ struct uart_port port;
+
+ /*
+ * We provide a per-port pm hook.
+ */
+ void (*pm)(struct uart_port *port,
+ unsigned int state, unsigned int old);
+};
+
+#define TXX9_REGION_SIZE 0x24
+
+/* TXX9 Serial Registers */
+#define TXX9_SILCR 0x00
+#define TXX9_SIDICR 0x04
+#define TXX9_SIDISR 0x08
+#define TXX9_SICISR 0x0c
+#define TXX9_SIFCR 0x10
+#define TXX9_SIFLCR 0x14
+#define TXX9_SIBGR 0x18
+#define TXX9_SITFIFO 0x1c
+#define TXX9_SIRFIFO 0x20
+
+/* SILCR : Line Control */
+#define TXX9_SILCR_SCS_MASK 0x00000060
+#define TXX9_SILCR_SCS_IMCLK 0x00000000
+#define TXX9_SILCR_SCS_IMCLK_BG 0x00000020
+#define TXX9_SILCR_SCS_SCLK 0x00000040
+#define TXX9_SILCR_SCS_SCLK_BG 0x00000060
+#define TXX9_SILCR_UEPS 0x00000010
+#define TXX9_SILCR_UPEN 0x00000008
+#define TXX9_SILCR_USBL_MASK 0x00000004
+#define TXX9_SILCR_USBL_1BIT 0x00000000
+#define TXX9_SILCR_USBL_2BIT 0x00000004
+#define TXX9_SILCR_UMODE_MASK 0x00000003
+#define TXX9_SILCR_UMODE_8BIT 0x00000000
+#define TXX9_SILCR_UMODE_7BIT 0x00000001
+
+/* SIDICR : DMA/Int. Control */
+#define TXX9_SIDICR_TDE 0x00008000
+#define TXX9_SIDICR_RDE 0x00004000
+#define TXX9_SIDICR_TIE 0x00002000
+#define TXX9_SIDICR_RIE 0x00001000
+#define TXX9_SIDICR_SPIE 0x00000800
+#define TXX9_SIDICR_CTSAC 0x00000600
+#define TXX9_SIDICR_STIE_MASK 0x0000003f
+#define TXX9_SIDICR_STIE_OERS 0x00000020
+#define TXX9_SIDICR_STIE_CTSS 0x00000010
+#define TXX9_SIDICR_STIE_RBRKD 0x00000008
+#define TXX9_SIDICR_STIE_TRDY 0x00000004
+#define TXX9_SIDICR_STIE_TXALS 0x00000002
+#define TXX9_SIDICR_STIE_UBRKD 0x00000001
+
+/* SIDISR : DMA/Int. Status */
+#define TXX9_SIDISR_UBRK 0x00008000
+#define TXX9_SIDISR_UVALID 0x00004000
+#define TXX9_SIDISR_UFER 0x00002000
+#define TXX9_SIDISR_UPER 0x00001000
+#define TXX9_SIDISR_UOER 0x00000800
+#define TXX9_SIDISR_ERI 0x00000400
+#define TXX9_SIDISR_TOUT 0x00000200
+#define TXX9_SIDISR_TDIS 0x00000100
+#define TXX9_SIDISR_RDIS 0x00000080
+#define TXX9_SIDISR_STIS 0x00000040
+#define TXX9_SIDISR_RFDN_MASK 0x0000001f
+
+/* SICISR : Change Int. Status */
+#define TXX9_SICISR_OERS 0x00000020
+#define TXX9_SICISR_CTSS 0x00000010
+#define TXX9_SICISR_RBRKD 0x00000008
+#define TXX9_SICISR_TRDY 0x00000004
+#define TXX9_SICISR_TXALS 0x00000002
+#define TXX9_SICISR_UBRKD 0x00000001
+
+/* SIFCR : FIFO Control */
+#define TXX9_SIFCR_SWRST 0x00008000
+#define TXX9_SIFCR_RDIL_MASK 0x00000180
+#define TXX9_SIFCR_RDIL_1 0x00000000
+#define TXX9_SIFCR_RDIL_4 0x00000080
+#define TXX9_SIFCR_RDIL_8 0x00000100
+#define TXX9_SIFCR_RDIL_12 0x00000180
+#define TXX9_SIFCR_RDIL_MAX 0x00000180
+#define TXX9_SIFCR_TDIL_MASK 0x00000018
+#define TXX9_SIFCR_TDIL_MASK 0x00000018
+#define TXX9_SIFCR_TDIL_1 0x00000000
+#define TXX9_SIFCR_TDIL_4 0x00000001
+#define TXX9_SIFCR_TDIL_8 0x00000010
+#define TXX9_SIFCR_TDIL_MAX 0x00000010
+#define TXX9_SIFCR_TFRST 0x00000004
+#define TXX9_SIFCR_RFRST 0x00000002
+#define TXX9_SIFCR_FRSTE 0x00000001
+#define TXX9_SIO_TX_FIFO 8
+#define TXX9_SIO_RX_FIFO 16
+
+/* SIFLCR : Flow Control */
+#define TXX9_SIFLCR_RCS 0x00001000
+#define TXX9_SIFLCR_TES 0x00000800
+#define TXX9_SIFLCR_RTSSC 0x00000200
+#define TXX9_SIFLCR_RSDE 0x00000100
+#define TXX9_SIFLCR_TSDE 0x00000080
+#define TXX9_SIFLCR_RTSTL_MASK 0x0000001e
+#define TXX9_SIFLCR_RTSTL_MAX 0x0000001e
+#define TXX9_SIFLCR_TBRK 0x00000001
+
+/* SIBGR : Baudrate Control */
+#define TXX9_SIBGR_BCLK_MASK 0x00000300
+#define TXX9_SIBGR_BCLK_T0 0x00000000
+#define TXX9_SIBGR_BCLK_T2 0x00000100
+#define TXX9_SIBGR_BCLK_T4 0x00000200
+#define TXX9_SIBGR_BCLK_T6 0x00000300
+#define TXX9_SIBGR_BRD_MASK 0x000000ff
+
+static inline unsigned int sio_in(struct uart_txx9_port *up, int offset)
+{
+ switch (up->port.iotype) {
+ default:
+ return *(volatile u32 *)(up->port.membase + offset);
+ case UPIO_PORT:
+ return inl(up->port.iobase + offset);
+ }
+}
+
+static inline void
+sio_out(struct uart_txx9_port *up, int offset, int value)
+{
+ switch (up->port.iotype) {
+ default:
+ *(volatile u32 *)(up->port.membase + offset) = value;
+ break;
+ case UPIO_PORT:
+ outl(value, up->port.iobase + offset);
+ break;
+ }
+}
+
+static inline void
+sio_mask(struct uart_txx9_port *up, int offset, unsigned int value)
+{
+ sio_out(up, offset, sio_in(up, offset) & ~value);
+}
+static inline void
+sio_set(struct uart_txx9_port *up, int offset, unsigned int value)
+{
+ sio_out(up, offset, sio_in(up, offset) | value);
+}
+
+static inline void
+sio_quot_set(struct uart_txx9_port *up, int quot)
+{
+ quot >>= 1;
+ if (quot < 256)
+ sio_out(up, TXX9_SIBGR, quot | TXX9_SIBGR_BCLK_T0);
+ else if (quot < (256 << 2))
+ sio_out(up, TXX9_SIBGR, (quot >> 2) | TXX9_SIBGR_BCLK_T2);
+ else if (quot < (256 << 4))
+ sio_out(up, TXX9_SIBGR, (quot >> 4) | TXX9_SIBGR_BCLK_T4);
+ else if (quot < (256 << 6))
+ sio_out(up, TXX9_SIBGR, (quot >> 6) | TXX9_SIBGR_BCLK_T6);
+ else
+ sio_out(up, TXX9_SIBGR, 0xff | TXX9_SIBGR_BCLK_T6);
+}
+
+static void serial_txx9_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ sio_mask(up, TXX9_SIDICR, TXX9_SIDICR_TIE);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void serial_txx9_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+ struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ sio_set(up, TXX9_SIDICR, TXX9_SIDICR_TIE);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void serial_txx9_stop_rx(struct uart_port *port)
+{
+ struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ up->port.read_status_mask &= ~TXX9_SIDISR_RDIS;
+#if 0
+ sio_mask(up, TXX9_SIDICR, TXX9_SIDICR_RIE);
+#endif
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void serial_txx9_enable_ms(struct uart_port *port)
+{
+ /* TXX9-SIO can not control DTR... */
+}
+
+static inline void
+receive_chars(struct uart_txx9_port *up, unsigned int *status, struct pt_regs *regs)
+{
+ struct tty_struct *tty = up->port.info->tty;
+ unsigned char ch;
+ unsigned int disr = *status;
+ int max_count = 256;
+ char flag;
+
+ do {
+ /* The following is not allowed by the tty layer and
+ unsafe. It should be fixed ASAP */
+ if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
+ if(tty->low_latency)
+ tty_flip_buffer_push(tty);
+ /* If this failed then we will throw away the
+ bytes but must do so to clear interrupts */
+ }
+ ch = sio_in(up, TXX9_SIRFIFO);
+ flag = TTY_NORMAL;
+ up->port.icount.rx++;
+
+ if (unlikely(disr & (TXX9_SIDISR_UBRK | TXX9_SIDISR_UPER |
+ TXX9_SIDISR_UFER | TXX9_SIDISR_UOER))) {
+ /*
+ * For statistics only
+ */
+ if (disr & TXX9_SIDISR_UBRK) {
+ disr &= ~(TXX9_SIDISR_UFER | TXX9_SIDISR_UPER);
+ up->port.icount.brk++;
+ /*
+ * We do the SysRQ and SAK checking
+ * here because otherwise the break
+ * may get masked by ignore_status_mask
+ * or read_status_mask.
+ */
+ if (uart_handle_break(&up->port))
+ goto ignore_char;
+ } else if (disr & TXX9_SIDISR_UPER)
+ up->port.icount.parity++;
+ else if (disr & TXX9_SIDISR_UFER)
+ up->port.icount.frame++;
+ if (disr & TXX9_SIDISR_UOER)
+ up->port.icount.overrun++;
+
+ /*
+ * Mask off conditions which should be ingored.
+ */
+ disr &= up->port.read_status_mask;
+
+ if (disr & TXX9_SIDISR_UBRK) {
+ flag = TTY_BREAK;
+ } else if (disr & TXX9_SIDISR_UPER)
+ flag = TTY_PARITY;
+ else if (disr & TXX9_SIDISR_UFER)
+ flag = TTY_FRAME;
+ }
+ if (uart_handle_sysrq_char(&up->port, ch, regs))
+ goto ignore_char;
+ if ((disr & up->port.ignore_status_mask) == 0) {
+ tty_insert_flip_char(tty, ch, flag);
+ }
+ if ((disr & TXX9_SIDISR_UOER) &&
+ tty->flip.count < TTY_FLIPBUF_SIZE) {
+ /*
+ * Overrun is special, since it's reported
+ * immediately, and doesn't affect the current
+ * character.
+ */
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ }
+ ignore_char:
+ disr = sio_in(up, TXX9_SIDISR);
+ } while (!(disr & TXX9_SIDISR_UVALID) && (max_count-- > 0));
+ tty_flip_buffer_push(tty);
+ *status = disr;
+}
+
+static inline void transmit_chars(struct uart_txx9_port *up)
+{
+ struct circ_buf *xmit = &up->port.info->xmit;
+ int count;
+
+ if (up->port.x_char) {
+ sio_out(up, TXX9_SITFIFO, up->port.x_char);
+ up->port.icount.tx++;
+ up->port.x_char = 0;
+ return;
+ }
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
+ serial_txx9_stop_tx(&up->port, 0);
+ return;
+ }
+
+ count = TXX9_SIO_TX_FIFO;
+ do {
+ sio_out(up, TXX9_SITFIFO, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ up->port.icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ } while (--count > 0);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+
+ if (uart_circ_empty(xmit))
+ serial_txx9_stop_tx(&up->port, 0);
+}
+
+static irqreturn_t serial_txx9_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ int pass_counter = 0;
+ struct uart_txx9_port *up = dev_id;
+ unsigned int status;
+
+ while (1) {
+ spin_lock(&up->port.lock);
+ status = sio_in(up, TXX9_SIDISR);
+ if (!(sio_in(up, TXX9_SIDICR) & TXX9_SIDICR_TIE))
+ status &= ~TXX9_SIDISR_TDIS;
+ if (!(status & (TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS |
+ TXX9_SIDISR_TOUT))) {
+ spin_unlock(&up->port.lock);
+ break;
+ }
+
+ if (status & TXX9_SIDISR_RDIS)
+ receive_chars(up, &status, regs);
+ if (status & TXX9_SIDISR_TDIS)
+ transmit_chars(up);
+ /* Clear TX/RX Int. Status */
+ sio_mask(up, TXX9_SIDISR,
+ TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS |
+ TXX9_SIDISR_TOUT);
+ spin_unlock(&up->port.lock);
+
+ if (pass_counter++ > PASS_LIMIT)
+ break;
+ }
+
+ return pass_counter ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static unsigned int serial_txx9_tx_empty(struct uart_port *port)
+{
+ struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ unsigned long flags;
+ unsigned int ret;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ ret = (sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS) ? TIOCSER_TEMT : 0;
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return ret;
+}
+
+static unsigned int serial_txx9_get_mctrl(struct uart_port *port)
+{
+ struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ unsigned long flags;
+ unsigned int ret;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ ret = ((sio_in(up, TXX9_SIFLCR) & TXX9_SIFLCR_RTSSC) ? 0 : TIOCM_RTS)
+ | ((sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS) ? 0 : TIOCM_CTS);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return ret;
+}
+
+static void serial_txx9_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ if (mctrl & TIOCM_RTS)
+ sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC);
+ else
+ sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void serial_txx9_break_ctl(struct uart_port *port, int break_state)
+{
+ struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ if (break_state == -1)
+ sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK);
+ else
+ sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static int serial_txx9_startup(struct uart_port *port)
+{
+ struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ unsigned long flags;
+ int retval;
+
+ /*
+ * Clear the FIFO buffers and disable them.
+ * (they will be reeanbled in set_termios())
+ */
+ sio_set(up, TXX9_SIFCR,
+ TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE);
+ /* clear reset */
+ sio_mask(up, TXX9_SIFCR,
+ TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE);
+ sio_out(up, TXX9_SIDICR, 0);
+
+ /*
+ * Clear the interrupt registers.
+ */
+ sio_out(up, TXX9_SIDISR, 0);
+
+ retval = request_irq(up->port.irq, serial_txx9_interrupt,
+ SA_SHIRQ, "serial_txx9", up);
+ if (retval)
+ return retval;
+
+ /*
+ * Now, initialize the UART
+ */
+ spin_lock_irqsave(&up->port.lock, flags);
+ serial_txx9_set_mctrl(&up->port, up->port.mctrl);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /* Enable RX/TX */
+ sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RSDE | TXX9_SIFLCR_TSDE);
+
+ /*
+ * Finally, enable interrupts.
+ */
+ sio_set(up, TXX9_SIDICR, TXX9_SIDICR_RIE);
+
+ return 0;
+}
+
+static void serial_txx9_shutdown(struct uart_port *port)
+{
+ struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ unsigned long flags;
+
+ /*
+ * Disable interrupts from this port
+ */
+ sio_out(up, TXX9_SIDICR, 0); /* disable all intrs */
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ serial_txx9_set_mctrl(&up->port, up->port.mctrl);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /*
+ * Disable break condition
+ */
+ sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_TBRK);
+
+#ifdef CONFIG_SERIAL_TXX9_CONSOLE
+ if (up->port.cons && up->port.line == up->port.cons->index) {
+ free_irq(up->port.irq, up);
+ return;
+ }
+#endif
+ /* reset FIFOs */
+ sio_set(up, TXX9_SIFCR,
+ TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE);
+ /* clear reset */
+ sio_mask(up, TXX9_SIFCR,
+ TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE);
+
+ /* Disable RX/TX */
+ sio_set(up, TXX9_SIFLCR, TXX9_SIFLCR_RSDE | TXX9_SIFLCR_TSDE);
+
+ free_irq(up->port.irq, up);
+}
+
+static void
+serial_txx9_set_termios(struct uart_port *port, struct termios *termios,
+ struct termios *old)
+{
+ struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ unsigned int cval, fcr = 0;
+ unsigned long flags;
+ unsigned int baud, quot;
+
+ cval = sio_in(up, TXX9_SILCR);
+ /* byte size and parity */
+ cval &= ~TXX9_SILCR_UMODE_MASK;
+ switch (termios->c_cflag & CSIZE) {
+ case CS7:
+ cval |= TXX9_SILCR_UMODE_7BIT;
+ break;
+ default:
+ case CS5: /* not supported */
+ case CS6: /* not supported */
+ case CS8:
+ cval |= TXX9_SILCR_UMODE_8BIT;
+ break;
+ }
+
+ cval &= ~TXX9_SILCR_USBL_MASK;
+ if (termios->c_cflag & CSTOPB)
+ cval |= TXX9_SILCR_USBL_2BIT;
+ else
+ cval |= TXX9_SILCR_USBL_1BIT;
+ cval &= ~(TXX9_SILCR_UPEN | TXX9_SILCR_UEPS);
+ if (termios->c_cflag & PARENB)
+ cval |= TXX9_SILCR_UPEN;
+ if (!(termios->c_cflag & PARODD))
+ cval |= TXX9_SILCR_UEPS;
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16/2);
+ quot = uart_get_divisor(port, baud);
+
+ /* Set up FIFOs */
+ /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */
+ fcr = TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1;
+
+ /*
+ * Ok, we're now changing the port state. Do it with
+ * interrupts disabled.
+ */
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ up->port.read_status_mask = TXX9_SIDISR_UOER |
+ TXX9_SIDISR_TDIS | TXX9_SIDISR_RDIS;
+ if (termios->c_iflag & INPCK)
+ up->port.read_status_mask |= TXX9_SIDISR_UFER | TXX9_SIDISR_UPER;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ up->port.read_status_mask |= TXX9_SIDISR_UBRK;
+
+ /*
+ * Characteres to ignore
+ */
+ up->port.ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= TXX9_SIDISR_UPER | TXX9_SIDISR_UFER;
+ if (termios->c_iflag & IGNBRK) {
+ up->port.ignore_status_mask |= TXX9_SIDISR_UBRK;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ up->port.ignore_status_mask |= TXX9_SIDISR_UOER;
+ }
+
+ /*
+ * ignore all characters if CREAD is not set
+ */
+ if ((termios->c_cflag & CREAD) == 0)
+ up->port.ignore_status_mask |= TXX9_SIDISR_RDIS;
+
+ /* CTS flow control flag */
+ if ((termios->c_cflag & CRTSCTS) &&
+ (up->port.flags & UPF_TXX9_HAVE_CTS_LINE)) {
+ sio_set(up, TXX9_SIFLCR,
+ TXX9_SIFLCR_RCS | TXX9_SIFLCR_TES);
+ } else {
+ sio_mask(up, TXX9_SIFLCR,
+ TXX9_SIFLCR_RCS | TXX9_SIFLCR_TES);
+ }
+
+ sio_out(up, TXX9_SILCR, cval);
+ sio_quot_set(up, quot);
+ sio_out(up, TXX9_SIFCR, fcr);
+
+ serial_txx9_set_mctrl(&up->port, up->port.mctrl);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void
+serial_txx9_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ if (state) {
+ /* sleep */
+
+ if (up->pm)
+ up->pm(port, state, oldstate);
+ } else {
+ /* wake */
+
+ if (up->pm)
+ up->pm(port, state, oldstate);
+ }
+}
+
+static int serial_txx9_request_resource(struct uart_txx9_port *up)
+{
+ unsigned int size = TXX9_REGION_SIZE;
+ int ret = 0;
+
+ switch (up->port.iotype) {
+ default:
+ if (!up->port.mapbase)
+ break;
+
+ if (!request_mem_region(up->port.mapbase, size, "serial_txx9")) {
+ ret = -EBUSY;
+ break;
+ }
+
+ if (up->port.flags & UPF_IOREMAP) {
+ up->port.membase = ioremap(up->port.mapbase, size);
+ if (!up->port.membase) {
+ release_mem_region(up->port.mapbase, size);
+ ret = -ENOMEM;
+ }
+ }
+ break;
+
+ case UPIO_PORT:
+ if (!request_region(up->port.iobase, size, "serial_txx9"))
+ ret = -EBUSY;
+ break;
+ }
+ return ret;
+}
+
+static void serial_txx9_release_resource(struct uart_txx9_port *up)
+{
+ unsigned int size = TXX9_REGION_SIZE;
+
+ switch (up->port.iotype) {
+ default:
+ if (!up->port.mapbase)
+ break;
+
+ if (up->port.flags & UPF_IOREMAP) {
+ iounmap(up->port.membase);
+ up->port.membase = NULL;
+ }
+
+ release_mem_region(up->port.mapbase, size);
+ break;
+
+ case UPIO_PORT:
+ release_region(up->port.iobase, size);
+ break;
+ }
+}
+
+static void serial_txx9_release_port(struct uart_port *port)
+{
+ struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ serial_txx9_release_resource(up);
+}
+
+static int serial_txx9_request_port(struct uart_port *port)
+{
+ struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ return serial_txx9_request_resource(up);
+}
+
+static void serial_txx9_config_port(struct uart_port *port, int uflags)
+{
+ struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ unsigned long flags;
+ int ret;
+
+ /*
+ * Find the region that we can probe for. This in turn
+ * tells us whether we can probe for the type of port.
+ */
+ ret = serial_txx9_request_resource(up);
+ if (ret < 0)
+ return;
+ port->type = PORT_TXX9;
+ up->port.fifosize = TXX9_SIO_TX_FIFO;
+
+#ifdef CONFIG_SERIAL_TXX9_CONSOLE
+ if (up->port.line == up->port.cons->index)
+ return;
+#endif
+ spin_lock_irqsave(&up->port.lock, flags);
+ /*
+ * Reset the UART.
+ */
+ sio_out(up, TXX9_SIFCR, TXX9_SIFCR_SWRST);
+#ifdef CONFIG_CPU_TX49XX
+ /* TX4925 BUG WORKAROUND. Accessing SIOC register
+ * immediately after soft reset causes bus error. */
+ iob();
+ udelay(1);
+#endif
+ while (sio_in(up, TXX9_SIFCR) & TXX9_SIFCR_SWRST)
+ ;
+ /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */
+ sio_set(up, TXX9_SIFCR,
+ TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1);
+ /* initial settings */
+ sio_out(up, TXX9_SILCR,
+ TXX9_SILCR_UMODE_8BIT | TXX9_SILCR_USBL_1BIT |
+ ((up->port.flags & UPF_TXX9_USE_SCLK) ?
+ TXX9_SILCR_SCS_SCLK_BG : TXX9_SILCR_SCS_IMCLK_BG));
+ sio_quot_set(up, uart_get_divisor(port, 9600));
+ sio_out(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSTL_MAX /* 15 */);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static int
+serial_txx9_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ if (ser->irq < 0 ||
+ ser->baud_base < 9600 || ser->type != PORT_TXX9)
+ return -EINVAL;
+ return 0;
+}
+
+static const char *
+serial_txx9_type(struct uart_port *port)
+{
+ return "txx9";
+}
+
+static struct uart_ops serial_txx9_pops = {
+ .tx_empty = serial_txx9_tx_empty,
+ .set_mctrl = serial_txx9_set_mctrl,
+ .get_mctrl = serial_txx9_get_mctrl,
+ .stop_tx = serial_txx9_stop_tx,
+ .start_tx = serial_txx9_start_tx,
+ .stop_rx = serial_txx9_stop_rx,
+ .enable_ms = serial_txx9_enable_ms,
+ .break_ctl = serial_txx9_break_ctl,
+ .startup = serial_txx9_startup,
+ .shutdown = serial_txx9_shutdown,
+ .set_termios = serial_txx9_set_termios,
+ .pm = serial_txx9_pm,
+ .type = serial_txx9_type,
+ .release_port = serial_txx9_release_port,
+ .request_port = serial_txx9_request_port,
+ .config_port = serial_txx9_config_port,
+ .verify_port = serial_txx9_verify_port,
+};
+
+static struct uart_txx9_port serial_txx9_ports[UART_NR];
+
+static void __init serial_txx9_register_ports(struct uart_driver *drv)
+{
+ int i;
+
+ for (i = 0; i < UART_NR; i++) {
+ struct uart_txx9_port *up = &serial_txx9_ports[i];
+
+ up->port.line = i;
+ up->port.ops = &serial_txx9_pops;
+ uart_add_one_port(drv, &up->port);
+ }
+}
+
+#ifdef CONFIG_SERIAL_TXX9_CONSOLE
+
+/*
+ * Wait for transmitter & holding register to empty
+ */
+static inline void wait_for_xmitr(struct uart_txx9_port *up)
+{
+ unsigned int tmout = 10000;
+
+ /* Wait up to 10ms for the character(s) to be sent. */
+ while (--tmout &&
+ !(sio_in(up, TXX9_SICISR) & TXX9_SICISR_TXALS))
+ udelay(1);
+
+ /* Wait up to 1s for flow control if necessary */
+ if (up->port.flags & UPF_CONS_FLOW) {
+ tmout = 1000000;
+ while (--tmout &&
+ (sio_in(up, TXX9_SICISR) & TXX9_SICISR_CTSS))
+ udelay(1);
+ }
+}
+
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ *
+ * The console_lock must be held when we get here.
+ */
+static void
+serial_txx9_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct uart_txx9_port *up = &serial_txx9_ports[co->index];
+ unsigned int ier, flcr;
+ int i;
+
+ /*
+ * First save the UER then disable the interrupts
+ */
+ ier = sio_in(up, TXX9_SIDICR);
+ sio_out(up, TXX9_SIDICR, 0);
+ /*
+ * Disable flow-control if enabled (and unnecessary)
+ */
+ flcr = sio_in(up, TXX9_SIFLCR);
+ if (!(up->port.flags & UPF_CONS_FLOW) && (flcr & TXX9_SIFLCR_TES))
+ sio_out(up, TXX9_SIFLCR, flcr & ~TXX9_SIFLCR_TES);
+
+ /*
+ * Now, do each character
+ */
+ for (i = 0; i < count; i++, s++) {
+ wait_for_xmitr(up);
+
+ /*
+ * Send the character out.
+ * If a LF, also do CR...
+ */
+ sio_out(up, TXX9_SITFIFO, *s);
+ if (*s == 10) {
+ wait_for_xmitr(up);
+ sio_out(up, TXX9_SITFIFO, 13);
+ }
+ }
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the IER
+ */
+ wait_for_xmitr(up);
+ sio_out(up, TXX9_SIFLCR, flcr);
+ sio_out(up, TXX9_SIDICR, ier);
+}
+
+static int serial_txx9_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ struct uart_txx9_port *up;
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ if (co->index >= UART_NR)
+ co->index = 0;
+ up = &serial_txx9_ports[co->index];
+ port = &up->port;
+ if (!port->ops)
+ return -ENODEV;
+
+ /*
+ * Temporary fix.
+ */
+ spin_lock_init(&port->lock);
+
+ /*
+ * Disable UART interrupts, set DTR and RTS high
+ * and set speed.
+ */
+ sio_out(up, TXX9_SIDICR, 0);
+ /* initial settings */
+ sio_out(up, TXX9_SILCR,
+ TXX9_SILCR_UMODE_8BIT | TXX9_SILCR_USBL_1BIT |
+ ((port->flags & UPF_TXX9_USE_SCLK) ?
+ TXX9_SILCR_SCS_SCLK_BG : TXX9_SILCR_SCS_IMCLK_BG));
+ sio_out(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSTL_MAX /* 15 */);
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver serial_txx9_reg;
+static struct console serial_txx9_console = {
+ .name = TXX9_TTY_NAME,
+ .write = serial_txx9_console_write,
+ .device = uart_console_device,
+ .setup = serial_txx9_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &serial_txx9_reg,
+};
+
+static int __init serial_txx9_console_init(void)
+{
+ register_console(&serial_txx9_console);
+ return 0;
+}
+console_initcall(serial_txx9_console_init);
+
+static int __init serial_txx9_late_console_init(void)
+{
+ if (!(serial_txx9_console.flags & CON_ENABLED))
+ register_console(&serial_txx9_console);
+ return 0;
+}
+late_initcall(serial_txx9_late_console_init);
+
+#define SERIAL_TXX9_CONSOLE &serial_txx9_console
+#else
+#define SERIAL_TXX9_CONSOLE NULL
+#endif
+
+static struct uart_driver serial_txx9_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "serial_txx9",
+ .devfs_name = TXX9_TTY_DEVFS_NAME,
+ .dev_name = TXX9_TTY_NAME,
+ .major = TXX9_TTY_MAJOR,
+ .minor = TXX9_TTY_MINOR_START,
+ .nr = UART_NR,
+ .cons = SERIAL_TXX9_CONSOLE,
+};
+
+int __init early_serial_txx9_setup(struct uart_port *port)
+{
+ if (port->line >= ARRAY_SIZE(serial_txx9_ports))
+ return -ENODEV;
+
+ serial_txx9_ports[port->line].port = *port;
+ serial_txx9_ports[port->line].port.ops = &serial_txx9_pops;
+ serial_txx9_ports[port->line].port.flags |= UPF_BOOT_AUTOCONF;
+ return 0;
+}
+
+#ifdef ENABLE_SERIAL_TXX9_PCI
+/**
+ * serial_txx9_suspend_port - suspend one serial port
+ * @line: serial line number
+ * @level: the level of port suspension, as per uart_suspend_port
+ *
+ * Suspend one serial port.
+ */
+static void serial_txx9_suspend_port(int line)
+{
+ uart_suspend_port(&serial_txx9_reg, &serial_txx9_ports[line].port);
+}
+
+/**
+ * serial_txx9_resume_port - resume one serial port
+ * @line: serial line number
+ * @level: the level of port resumption, as per uart_resume_port
+ *
+ * Resume one serial port.
+ */
+static void serial_txx9_resume_port(int line)
+{
+ uart_resume_port(&serial_txx9_reg, &serial_txx9_ports[line].port);
+}
+
+/*
+ * Probe one serial board. Unfortunately, there is no rhyme nor reason
+ * to the arrangement of serial ports on a PCI card.
+ */
+static int __devinit
+pciserial_txx9_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
+{
+ struct uart_port port;
+ int line;
+ int rc;
+
+ rc = pci_enable_device(dev);
+ if (rc)
+ return rc;
+
+ memset(&port, 0, sizeof(port));
+ port.ops = &serial_txx9_pops;
+ port.flags |= UPF_BOOT_AUTOCONF; /* uart_ops.config_port will be called */
+ port.flags |= UPF_TXX9_HAVE_CTS_LINE;
+ port.uartclk = 66670000;
+ port.irq = dev->irq;
+ port.iotype = UPIO_PORT;
+ port.iobase = pci_resource_start(dev, 1);
+ line = uart_register_port(&serial_txx9_reg, &port);
+ if (line < 0) {
+ printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), line);
+ }
+ pci_set_drvdata(dev, (void *)(long)line);
+
+ return 0;
+}
+
+static void __devexit pciserial_txx9_remove_one(struct pci_dev *dev)
+{
+ int line = (int)(long)pci_get_drvdata(dev);
+
+ pci_set_drvdata(dev, NULL);
+
+ if (line) {
+ uart_unregister_port(&serial_txx9_reg, line);
+ pci_disable_device(dev);
+ }
+}
+
+static int pciserial_txx9_suspend_one(struct pci_dev *dev, u32 state)
+{
+ int line = (int)(long)pci_get_drvdata(dev);
+
+ if (line)
+ serial_txx9_suspend_port(line);
+ return 0;
+}
+
+static int pciserial_txx9_resume_one(struct pci_dev *dev)
+{
+ int line = (int)(long)pci_get_drvdata(dev);
+
+ if (line)
+ serial_txx9_resume_port(line);
+ return 0;
+}
+
+static struct pci_device_id serial_txx9_pci_tbl[] = {
+ { PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0, 0 },
+ { 0, }
+};
+
+static struct pci_driver serial_txx9_pci_driver = {
+ .name = "serial_txx9",
+ .probe = pciserial_txx9_init_one,
+ .remove = __devexit_p(pciserial_txx9_remove_one),
+ .suspend = pciserial_txx9_suspend_one,
+ .resume = pciserial_txx9_resume_one,
+ .id_table = serial_txx9_pci_tbl,
+};
+
+MODULE_DEVICE_TABLE(pci, serial_txx9_pci_tbl);
+#endif /* ENABLE_SERIAL_TXX9_PCI */
+
+static int __init serial_txx9_init(void)
+{
+ int ret;
+
+ printk(KERN_INFO "%s version %s\n", serial_name, serial_version);
+
+ ret = uart_register_driver(&serial_txx9_reg);
+ if (ret >= 0) {
+ serial_txx9_register_ports(&serial_txx9_reg);
+
+#ifdef ENABLE_SERIAL_TXX9_PCI
+ ret = pci_module_init(&serial_txx9_pci_driver);
+#endif
+ }
+ return ret;
+}
+
+static void __exit serial_txx9_exit(void)
+{
+ int i;
+
+#ifdef ENABLE_SERIAL_TXX9_PCI
+ pci_unregister_driver(&serial_txx9_pci_driver);
+#endif
+ for (i = 0; i < UART_NR; i++)
+ uart_remove_one_port(&serial_txx9_reg, &serial_txx9_ports[i].port);
+
+ uart_unregister_driver(&serial_txx9_reg);
+}
+
+module_init(serial_txx9_init);
+module_exit(serial_txx9_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("TX39/49 serial driver");
+
+MODULE_ALIAS_CHARDEV_MAJOR(TXX9_TTY_MAJOR);
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
new file mode 100644
index 00000000000..ad5b776d779
--- /dev/null
+++ b/drivers/serial/sh-sci.c
@@ -0,0 +1,1692 @@
+/*
+ * drivers/serial/sh-sci.c
+ *
+ * SuperH on-chip serial module support. (SCI with no FIFO / with FIFO)
+ *
+ * Copyright (C) 2002, 2003, 2004 Paul Mundt
+ *
+ * based off of the old drivers/char/sh-sci.c by:
+ *
+ * Copyright (C) 1999, 2000 Niibe Yutaka
+ * Copyright (C) 2000 Sugioka Toshinobu
+ * Modified to support multiple serial ports. Stuart Menefy (May 2000).
+ * Modified to support SecureEdge. David McCullough (2002)
+ * Modified to support SH7300 SCIF. Takashi Kusuda (Jun 2003).
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#undef DEBUG
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/sysrq.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/console.h>
+#include <linux/bitops.h>
+
+#ifdef CONFIG_CPU_FREQ
+#include <linux/notifier.h>
+#include <linux/cpufreq.h>
+#endif
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#include <linux/generic_serial.h>
+
+#ifdef CONFIG_SH_STANDARD_BIOS
+#include <asm/sh_bios.h>
+#endif
+
+#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include "sh-sci.h"
+
+#ifdef CONFIG_SH_KGDB
+#include <asm/kgdb.h>
+
+static int kgdb_get_char(struct sci_port *port);
+static void kgdb_put_char(struct sci_port *port, char c);
+static void kgdb_handle_error(struct sci_port *port);
+static struct sci_port *kgdb_sci_port;
+#endif /* CONFIG_SH_KGDB */
+
+#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+static struct sci_port *serial_console_port = 0;
+#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
+
+/* Function prototypes */
+static void sci_stop_tx(struct uart_port *port, unsigned int tty_stop);
+static void sci_start_tx(struct uart_port *port, unsigned int tty_start);
+static void sci_start_rx(struct uart_port *port, unsigned int tty_start);
+static void sci_stop_rx(struct uart_port *port);
+static int sci_request_irq(struct sci_port *port);
+static void sci_free_irq(struct sci_port *port);
+
+static struct sci_port sci_ports[SCI_NPORTS];
+static struct uart_driver sci_uart_driver;
+
+#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
+
+static void handle_error(struct uart_port *port)
+{ /* Clear error flags */
+ sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
+}
+
+static int get_char(struct uart_port *port)
+{
+ unsigned long flags;
+ unsigned short status;
+ int c;
+
+ local_irq_save(flags);
+ do {
+ status = sci_in(port, SCxSR);
+ if (status & SCxSR_ERRORS(port)) {
+ handle_error(port);
+ continue;
+ }
+ } while (!(status & SCxSR_RDxF(port)));
+ c = sci_in(port, SCxRDR);
+ sci_in(port, SCxSR); /* Dummy read */
+ sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+ local_irq_restore(flags);
+
+ return c;
+}
+
+/* Taken from sh-stub.c of GDB 4.18 */
+static const char hexchars[] = "0123456789abcdef";
+
+static __inline__ char highhex(int x)
+{
+ return hexchars[(x >> 4) & 0xf];
+}
+
+static __inline__ char lowhex(int x)
+{
+ return hexchars[x & 0xf];
+}
+
+#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */
+
+/*
+ * Send the packet in buffer. The host gets one chance to read it.
+ * This routine does not wait for a positive acknowledge.
+ */
+
+#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+static void put_char(struct uart_port *port, char c)
+{
+ unsigned long flags;
+ unsigned short status;
+
+ local_irq_save(flags);
+
+ do {
+ status = sci_in(port, SCxSR);
+ } while (!(status & SCxSR_TDxE(port)));
+
+ sci_out(port, SCxTDR, c);
+ sci_in(port, SCxSR); /* Dummy read */
+ sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
+
+ local_irq_restore(flags);
+}
+
+static void put_string(struct sci_port *sci_port, const char *buffer, int count)
+{
+ struct uart_port *port = &sci_port->port;
+ const unsigned char *p = buffer;
+ int i;
+
+#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
+ int checksum;
+ int usegdb=0;
+
+#ifdef CONFIG_SH_STANDARD_BIOS
+ /* This call only does a trap the first time it is
+ * called, and so is safe to do here unconditionally
+ */
+ usegdb |= sh_bios_in_gdb_mode();
+#endif
+#ifdef CONFIG_SH_KGDB
+ usegdb |= (kgdb_in_gdb_mode && (port == kgdb_sci_port));
+#endif
+
+ if (usegdb) {
+ /* $<packet info>#<checksum>. */
+ do {
+ unsigned char c;
+ put_char(port, '$');
+ put_char(port, 'O'); /* 'O'utput to console */
+ checksum = 'O';
+
+ for (i=0; i<count; i++) { /* Don't use run length encoding */
+ int h, l;
+
+ c = *p++;
+ h = highhex(c);
+ l = lowhex(c);
+ put_char(port, h);
+ put_char(port, l);
+ checksum += h + l;
+ }
+ put_char(port, '#');
+ put_char(port, highhex(checksum));
+ put_char(port, lowhex(checksum));
+ } while (get_char(port) != '+');
+ } else
+#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */
+ for (i=0; i<count; i++) {
+ if (*p == 10)
+ put_char(port, '\r');
+ put_char(port, *p++);
+ }
+}
+#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
+
+
+#ifdef CONFIG_SH_KGDB
+
+/* Is the SCI ready, ie is there a char waiting? */
+static int kgdb_is_char_ready(struct sci_port *port)
+{
+ unsigned short status = sci_in(port, SCxSR);
+
+ if (status & (SCxSR_ERRORS(port) | SCxSR_BRK(port)))
+ kgdb_handle_error(port);
+
+ return (status & SCxSR_RDxF(port));
+}
+
+/* Write a char */
+static void kgdb_put_char(struct sci_port *port, char c)
+{
+ unsigned short status;
+
+ do
+ status = sci_in(port, SCxSR);
+ while (!(status & SCxSR_TDxE(port)));
+
+ sci_out(port, SCxTDR, c);
+ sci_in(port, SCxSR); /* Dummy read */
+ sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
+}
+
+/* Get a char if there is one, else ret -1 */
+static int kgdb_get_char(struct sci_port *port)
+{
+ int c;
+
+ if (kgdb_is_char_ready(port) == 0)
+ c = -1;
+ else {
+ c = sci_in(port, SCxRDR);
+ sci_in(port, SCxSR); /* Dummy read */
+ sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+ }
+
+ return c;
+}
+
+/* Called from kgdbstub.c to get a character, i.e. is blocking */
+static int kgdb_sci_getchar(void)
+{
+ volatile int c;
+
+ /* Keep trying to read a character, this could be neater */
+ while ((c = kgdb_get_char(kgdb_sci_port)) < 0);
+
+ return c;
+}
+
+/* Called from kgdbstub.c to put a character, just a wrapper */
+static void kgdb_sci_putchar(int c)
+{
+
+ kgdb_put_char(kgdb_sci_port, c);
+}
+
+/* Clear any errors on the SCI */
+static void kgdb_handle_error(struct sci_port *port)
+{
+ sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port)); /* Clear error flags */
+}
+
+/* Breakpoint if there's a break sent on the serial port */
+static void kgdb_break_interrupt(int irq, void *ptr, struct pt_regs *regs)
+{
+ struct sci_port *port = ptr;
+ unsigned short status = sci_in(port, SCxSR);
+
+ if (status & SCxSR_BRK(port)) {
+
+ /* Break into the debugger if a break is detected */
+ BREAKPOINT();
+
+ /* Clear */
+ sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port));
+ }
+}
+
+#endif /* CONFIG_SH_KGDB */
+
+#if defined(__H8300S__)
+enum { sci_disable, sci_enable };
+
+static void h8300_sci_enable(struct uart_port* port, unsigned int ctrl)
+{
+ volatile unsigned char *mstpcrl=(volatile unsigned char *)MSTPCRL;
+ int ch = (port->mapbase - SMR0) >> 3;
+ unsigned char mask = 1 << (ch+1);
+
+ if (ctrl == sci_disable) {
+ *mstpcrl |= mask;
+ } else {
+ *mstpcrl &= ~mask;
+ }
+}
+#endif
+
+#if defined(SCI_ONLY) || defined(SCI_AND_SCIF)
+#if defined(__H8300H__) || defined(__H8300S__)
+static void sci_init_pins_sci(struct uart_port* port, unsigned int cflag)
+{
+ int ch = (port->mapbase - SMR0) >> 3;
+
+ /* set DDR regs */
+ H8300_GPIO_DDR(h8300_sci_pins[ch].port,h8300_sci_pins[ch].rx,H8300_GPIO_INPUT);
+ H8300_GPIO_DDR(h8300_sci_pins[ch].port,h8300_sci_pins[ch].tx,H8300_GPIO_OUTPUT);
+ /* tx mark output*/
+ H8300_SCI_DR(ch) |= h8300_sci_pins[ch].tx;
+}
+#else
+static void sci_init_pins_sci(struct uart_port *port, unsigned int cflag)
+{
+}
+#endif
+#endif
+
+#if defined(SCIF_ONLY) || defined(SCI_AND_SCIF)
+#if defined(CONFIG_CPU_SH3)
+/* For SH7705, SH7707, SH7709, SH7709A, SH7729, SH7300*/
+static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+{
+ unsigned int fcr_val = 0;
+#if !defined(CONFIG_CPU_SUBTYPE_SH7300) /* SH7300 doesn't use RTS/CTS */
+ {
+ unsigned short data;
+
+ /* We need to set SCPCR to enable RTS/CTS */
+ data = ctrl_inw(SCPCR);
+ /* Clear out SCP7MD1,0, SCP6MD1,0, SCP4MD1,0*/
+ ctrl_outw(data&0x0fcf, SCPCR);
+ }
+ if (cflag & CRTSCTS)
+ fcr_val |= SCFCR_MCE;
+ else {
+ unsigned short data;
+
+ /* We need to set SCPCR to enable RTS/CTS */
+ data = ctrl_inw(SCPCR);
+ /* Clear out SCP7MD1,0, SCP4MD1,0,
+ Set SCP6MD1,0 = {01} (output) */
+ ctrl_outw((data&0x0fcf)|0x1000, SCPCR);
+
+ data = ctrl_inb(SCPDR);
+ /* Set /RTS2 (bit6) = 0 */
+ ctrl_outb(data&0xbf, SCPDR);
+ }
+#endif
+ sci_out(port, SCFCR, fcr_val);
+}
+
+static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag)
+{
+ unsigned int fcr_val = 0;
+
+ if (cflag & CRTSCTS)
+ fcr_val |= SCFCR_MCE;
+
+ sci_out(port, SCFCR, fcr_val);
+}
+
+#else
+
+/* For SH7750 */
+static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
+{
+ unsigned int fcr_val = 0;
+
+ if (cflag & CRTSCTS) {
+ fcr_val |= SCFCR_MCE;
+ } else {
+ ctrl_outw(0x0080, SCSPTR2); /* Set RTS = 1 */
+ }
+ sci_out(port, SCFCR, fcr_val);
+}
+
+#endif
+#endif /* SCIF_ONLY || SCI_AND_SCIF */
+
+/* ********************************************************************** *
+ * the interrupt related routines *
+ * ********************************************************************** */
+
+static void sci_transmit_chars(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->info->xmit;
+ unsigned int stopped = uart_tx_stopped(port);
+ unsigned long flags;
+ unsigned short status;
+ unsigned short ctrl;
+ int count, txroom;
+
+ status = sci_in(port, SCxSR);
+ if (!(status & SCxSR_TDxE(port))) {
+ local_irq_save(flags);
+ ctrl = sci_in(port, SCSCR);
+ if (uart_circ_empty(xmit)) {
+ ctrl &= ~SCI_CTRL_FLAGS_TIE;
+ } else {
+ ctrl |= SCI_CTRL_FLAGS_TIE;
+ }
+ sci_out(port, SCSCR, ctrl);
+ local_irq_restore(flags);
+ return;
+ }
+
+#if !defined(SCI_ONLY)
+ if (port->type == PORT_SCIF) {
+ txroom = SCIF_TXROOM_MAX - (sci_in(port, SCFDR)>>8);
+ } else {
+ txroom = (sci_in(port, SCxSR) & SCI_TDRE)?1:0;
+ }
+#else
+ txroom = (sci_in(port, SCxSR) & SCI_TDRE)?1:0;
+#endif
+
+ count = txroom;
+
+ do {
+ unsigned char c;
+
+ if (port->x_char) {
+ c = port->x_char;
+ port->x_char = 0;
+ } else if (!uart_circ_empty(xmit) && !stopped) {
+ c = xmit->buf[xmit->tail];
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ } else {
+ break;
+ }
+
+ sci_out(port, SCxTDR, c);
+
+ port->icount.tx++;
+ } while (--count > 0);
+
+ sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+ if (uart_circ_empty(xmit)) {
+ sci_stop_tx(port, 0);
+ } else {
+ local_irq_save(flags);
+ ctrl = sci_in(port, SCSCR);
+
+#if !defined(SCI_ONLY)
+ if (port->type == PORT_SCIF) {
+ sci_in(port, SCxSR); /* Dummy read */
+ sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
+ }
+#endif
+
+ ctrl |= SCI_CTRL_FLAGS_TIE;
+ sci_out(port, SCSCR, ctrl);
+ local_irq_restore(flags);
+ }
+}
+
+/* On SH3, SCIF may read end-of-break as a space->mark char */
+#define STEPFN(c) ({int __c=(c); (((__c-1)|(__c)) == -1); })
+
+static inline void sci_receive_chars(struct uart_port *port,
+ struct pt_regs *regs)
+{
+ struct tty_struct *tty = port->info->tty;
+ int i, count, copied = 0;
+ unsigned short status;
+
+ status = sci_in(port, SCxSR);
+ if (!(status & SCxSR_RDxF(port)))
+ return;
+
+ while (1) {
+#if !defined(SCI_ONLY)
+ if (port->type == PORT_SCIF) {
+ count = sci_in(port, SCFDR)&SCIF_RFDC_MASK ;
+ } else {
+ count = (sci_in(port, SCxSR)&SCxSR_RDxF(port))?1:0;
+ }
+#else
+ count = (sci_in(port, SCxSR)&SCxSR_RDxF(port))?1:0;
+#endif
+
+ /* Don't copy more bytes than there is room for in the buffer */
+ if (tty->flip.count + count > TTY_FLIPBUF_SIZE)
+ count = TTY_FLIPBUF_SIZE - tty->flip.count;
+
+ /* If for any reason we can't copy more data, we're done! */
+ if (count == 0)
+ break;
+
+ if (port->type == PORT_SCI) {
+ char c = sci_in(port, SCxRDR);
+ if(((struct sci_port *)port)->break_flag
+ || uart_handle_sysrq_char(port, c, regs)) {
+ count = 0;
+ } else {
+ tty->flip.char_buf_ptr[0] = c;
+ tty->flip.flag_buf_ptr[0] = TTY_NORMAL;
+ }
+ } else {
+ for (i=0; i<count; i++) {
+ char c = sci_in(port, SCxRDR);
+ status = sci_in(port, SCxSR);
+#if defined(CONFIG_CPU_SH3)
+ /* Skip "chars" during break */
+ if (((struct sci_port *)port)->break_flag) {
+ if ((c == 0) &&
+ (status & SCxSR_FER(port))) {
+ count--; i--;
+ continue;
+ }
+ /* Nonzero => end-of-break */
+ pr_debug("scif: debounce<%02x>\n", c);
+ ((struct sci_port *)port)->break_flag = 0;
+ if (STEPFN(c)) {
+ count--; i--;
+ continue;
+ }
+ }
+#endif /* CONFIG_CPU_SH3 */
+ if (uart_handle_sysrq_char(port, c, regs)) {
+ count--; i--;
+ continue;
+ }
+
+ /* Store data and status */
+ tty->flip.char_buf_ptr[i] = c;
+ if (status&SCxSR_FER(port)) {
+ tty->flip.flag_buf_ptr[i] = TTY_FRAME;
+ pr_debug("sci: frame error\n");
+ } else if (status&SCxSR_PER(port)) {
+ tty->flip.flag_buf_ptr[i] = TTY_PARITY;
+ pr_debug("sci: parity error\n");
+ } else {
+ tty->flip.flag_buf_ptr[i] = TTY_NORMAL;
+ }
+ }
+ }
+
+ sci_in(port, SCxSR); /* dummy read */
+ sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+
+ /* Update the kernel buffer end */
+ tty->flip.count += count;
+ tty->flip.char_buf_ptr += count;
+ tty->flip.flag_buf_ptr += count;
+ copied += count;
+ port->icount.rx += count;
+ }
+
+ if (copied) {
+ /* Tell the rest of the system the news. New characters! */
+ tty_flip_buffer_push(tty);
+ } else {
+ sci_in(port, SCxSR); /* dummy read */
+ sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+ }
+}
+
+#define SCI_BREAK_JIFFIES (HZ/20)
+/* The sci generates interrupts during the break,
+ * 1 per millisecond or so during the break period, for 9600 baud.
+ * So dont bother disabling interrupts.
+ * But dont want more than 1 break event.
+ * Use a kernel timer to periodically poll the rx line until
+ * the break is finished.
+ */
+static void sci_schedule_break_timer(struct sci_port *port)
+{
+ port->break_timer.expires = jiffies + SCI_BREAK_JIFFIES;
+ add_timer(&port->break_timer);
+}
+/* Ensure that two consecutive samples find the break over. */
+static void sci_break_timer(unsigned long data)
+{
+ struct sci_port * port = (struct sci_port *)data;
+ if(sci_rxd_in(&port->port) == 0) {
+ port->break_flag = 1;
+ sci_schedule_break_timer(port);
+ } else if(port->break_flag == 1){
+ /* break is over. */
+ port->break_flag = 2;
+ sci_schedule_break_timer(port);
+ } else port->break_flag = 0;
+}
+
+static inline int sci_handle_errors(struct uart_port *port)
+{
+ int copied = 0;
+ unsigned short status = sci_in(port, SCxSR);
+ struct tty_struct *tty = port->info->tty;
+
+ if (status&SCxSR_ORER(port) && tty->flip.count<TTY_FLIPBUF_SIZE) {
+ /* overrun error */
+ copied++;
+ *tty->flip.flag_buf_ptr++ = TTY_OVERRUN;
+ pr_debug("sci: overrun error\n");
+ }
+
+ if (status&SCxSR_FER(port) && tty->flip.count<TTY_FLIPBUF_SIZE) {
+ if (sci_rxd_in(port) == 0) {
+ /* Notify of BREAK */
+ struct sci_port * sci_port = (struct sci_port *)port;
+ if(!sci_port->break_flag) {
+ sci_port->break_flag = 1;
+ sci_schedule_break_timer((struct sci_port *)port);
+ /* Do sysrq handling. */
+ if(uart_handle_break(port)) {
+ return 0;
+ }
+ pr_debug("sci: BREAK detected\n");
+ copied++;
+ *tty->flip.flag_buf_ptr++ = TTY_BREAK;
+ }
+ }
+ else {
+ /* frame error */
+ copied++;
+ *tty->flip.flag_buf_ptr++ = TTY_FRAME;
+ pr_debug("sci: frame error\n");
+ }
+ }
+
+ if (status&SCxSR_PER(port) && tty->flip.count<TTY_FLIPBUF_SIZE) {
+ /* parity error */
+ copied++;
+ *tty->flip.flag_buf_ptr++ = TTY_PARITY;
+ pr_debug("sci: parity error\n");
+ }
+
+ if (copied) {
+ tty->flip.count += copied;
+ tty_flip_buffer_push(tty);
+ }
+
+ return copied;
+}
+
+static inline int sci_handle_breaks(struct uart_port *port)
+{
+ int copied = 0;
+ unsigned short status = sci_in(port, SCxSR);
+ struct tty_struct *tty = port->info->tty;
+ struct sci_port *s = &sci_ports[port->line];
+
+ if (!s->break_flag && status & SCxSR_BRK(port) &&
+ tty->flip.count < TTY_FLIPBUF_SIZE) {
+#if defined(CONFIG_CPU_SH3)
+ /* Debounce break */
+ s->break_flag = 1;
+#endif
+ /* Notify of BREAK */
+ copied++;
+ *tty->flip.flag_buf_ptr++ = TTY_BREAK;
+ pr_debug("sci: BREAK detected\n");
+ }
+
+#if defined(SCIF_ORER)
+ /* XXX: Handle SCIF overrun error */
+ if (port->type == PORT_SCIF && (sci_in(port, SCLSR) & SCIF_ORER) != 0) {
+ sci_out(port, SCLSR, 0);
+ if(tty->flip.count<TTY_FLIPBUF_SIZE) {
+ copied++;
+ *tty->flip.flag_buf_ptr++ = TTY_OVERRUN;
+ pr_debug("sci: overrun error\n");
+ }
+ }
+#endif
+
+ if (copied) {
+ tty->flip.count += copied;
+ tty_flip_buffer_push(tty);
+ }
+
+ return copied;
+}
+
+static irqreturn_t sci_rx_interrupt(int irq, void *ptr, struct pt_regs *regs)
+{
+ struct uart_port *port = ptr;
+
+ /* I think sci_receive_chars has to be called irrespective
+ * of whether the I_IXOFF is set, otherwise, how is the interrupt
+ * to be disabled?
+ */
+ sci_receive_chars(port, regs);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sci_tx_interrupt(int irq, void *ptr, struct pt_regs *regs)
+{
+ struct uart_port *port = ptr;
+
+ sci_transmit_chars(port);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sci_er_interrupt(int irq, void *ptr, struct pt_regs *regs)
+{
+ struct uart_port *port = ptr;
+
+ /* Handle errors */
+ if (port->type == PORT_SCI) {
+ if (sci_handle_errors(port)) {
+ /* discard character in rx buffer */
+ sci_in(port, SCxSR);
+ sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+ }
+ } else {
+#if defined(SCIF_ORER)
+ if((sci_in(port, SCLSR) & SCIF_ORER) != 0) {
+ struct tty_struct *tty = port->info->tty;
+
+ sci_out(port, SCLSR, 0);
+ if(tty->flip.count<TTY_FLIPBUF_SIZE) {
+ *tty->flip.flag_buf_ptr++ = TTY_OVERRUN;
+ tty->flip.count++;
+ tty_flip_buffer_push(tty);
+ pr_debug("scif: overrun error\n");
+ }
+ }
+#endif
+ sci_rx_interrupt(irq, ptr, regs);
+ }
+
+ sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
+
+ /* Kick the transmission */
+ sci_tx_interrupt(irq, ptr, regs);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sci_br_interrupt(int irq, void *ptr, struct pt_regs *regs)
+{
+ struct uart_port *port = ptr;
+
+ /* Handle BREAKs */
+ sci_handle_breaks(port);
+ sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port));
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr, struct pt_regs *regs)
+{
+ unsigned short ssr_status, scr_status;
+ struct uart_port *port = ptr;
+
+ ssr_status = sci_in(port,SCxSR);
+ scr_status = sci_in(port,SCSCR);
+
+ /* Tx Interrupt */
+ if ((ssr_status&0x0020) && (scr_status&0x0080))
+ sci_tx_interrupt(irq, ptr, regs);
+ /* Rx Interrupt */
+ if ((ssr_status&0x0002) && (scr_status&0x0040))
+ sci_rx_interrupt(irq, ptr, regs);
+ /* Error Interrupt */
+ if ((ssr_status&0x0080) && (scr_status&0x0400))
+ sci_er_interrupt(irq, ptr, regs);
+ /* Break Interrupt */
+ if ((ssr_status&0x0010) && (scr_status&0x0200))
+ sci_br_interrupt(irq, ptr, regs);
+
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_CPU_FREQ
+/*
+ * Here we define a transistion notifier so that we can update all of our
+ * ports' baud rate when the peripheral clock changes.
+ */
+static int sci_notifier(struct notifier_block *self, unsigned long phase, void *p)
+{
+ struct cpufreq_freqs *freqs = p;
+ int i;
+
+ if ((phase == CPUFREQ_POSTCHANGE) ||
+ (phase == CPUFREQ_RESUMECHANGE)){
+ for (i = 0; i < SCI_NPORTS; i++) {
+ struct uart_port *port = &sci_ports[i].port;
+
+ /*
+ * Update the uartclk per-port if frequency has
+ * changed, since it will no longer necessarily be
+ * consistent with the old frequency.
+ *
+ * Really we want to be able to do something like
+ * uart_change_speed() or something along those lines
+ * here to implicitly reset the per-port baud rate..
+ *
+ * Clean this up later..
+ */
+ port->uartclk = current_cpu_data.module_clock * 16;
+ }
+
+ printk("%s: got a postchange notification for cpu %d (old %d, new %d)\n",
+ __FUNCTION__, freqs->cpu, freqs->old, freqs->new);
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block sci_nb = { &sci_notifier, NULL, 0 };
+#endif /* CONFIG_CPU_FREQ */
+
+static int sci_request_irq(struct sci_port *port)
+{
+ int i;
+ irqreturn_t (*handlers[4])(int irq, void *ptr, struct pt_regs *regs) = {
+ sci_er_interrupt, sci_rx_interrupt, sci_tx_interrupt,
+ sci_br_interrupt,
+ };
+ const char *desc[] = { "SCI Receive Error", "SCI Receive Data Full",
+ "SCI Transmit Data Empty", "SCI Break" };
+
+ if (port->irqs[0] == port->irqs[1]) {
+ if (!port->irqs[0]) {
+ printk(KERN_ERR "sci: Cannot allocate irq.(IRQ=0)\n");
+ return -ENODEV;
+ }
+ if (request_irq(port->irqs[0], sci_mpxed_interrupt, SA_INTERRUPT,
+ "sci", port)) {
+ printk(KERN_ERR "sci: Cannot allocate irq.\n");
+ return -ENODEV;
+ }
+ } else {
+ for (i = 0; i < ARRAY_SIZE(handlers); i++) {
+ if (!port->irqs[i])
+ continue;
+ if (request_irq(port->irqs[i], handlers[i], SA_INTERRUPT,
+ desc[i], port)) {
+ printk(KERN_ERR "sci: Cannot allocate irq.\n");
+ return -ENODEV;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static void sci_free_irq(struct sci_port *port)
+{
+ int i;
+
+ if (port->irqs[0] == port->irqs[1]) {
+ if (!port->irqs[0])
+ printk("sci: sci_free_irq error\n");
+ else
+ free_irq(port->irqs[0], port);
+ } else {
+ for (i = 0; i < ARRAY_SIZE(port->irqs); i++) {
+ if (!port->irqs[i])
+ continue;
+
+ free_irq(port->irqs[i], port);
+ }
+ }
+}
+
+static unsigned int sci_tx_empty(struct uart_port *port)
+{
+ /* Can't detect */
+ return TIOCSER_TEMT;
+}
+
+static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ /* This routine is used for seting signals of: DTR, DCD, CTS/RTS */
+ /* We use SCIF's hardware for CTS/RTS, so don't need any for that. */
+ /* If you have signals for DTR and DCD, please implement here. */
+}
+
+static unsigned int sci_get_mctrl(struct uart_port *port)
+{
+ /* This routine is used for geting signals of: DTR, DCD, DSR, RI,
+ and CTS/RTS */
+
+ return TIOCM_DTR | TIOCM_RTS | TIOCM_DSR;
+}
+
+static void sci_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+ struct sci_port *s = &sci_ports[port->line];
+
+ disable_irq(s->irqs[SCIx_TXI_IRQ]);
+ sci_transmit_chars(port);
+ enable_irq(s->irqs[SCIx_TXI_IRQ]);
+}
+
+static void sci_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ unsigned long flags;
+ unsigned short ctrl;
+
+ /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
+ local_irq_save(flags);
+ ctrl = sci_in(port, SCSCR);
+ ctrl &= ~SCI_CTRL_FLAGS_TIE;
+ sci_out(port, SCSCR, ctrl);
+ local_irq_restore(flags);
+}
+
+static void sci_start_rx(struct uart_port *port, unsigned int tty_start)
+{
+ unsigned long flags;
+ unsigned short ctrl;
+
+ /* Set RIE (Receive Interrupt Enable) bit in SCSCR */
+ local_irq_save(flags);
+ ctrl = sci_in(port, SCSCR);
+ ctrl |= SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE;
+ sci_out(port, SCSCR, ctrl);
+ local_irq_restore(flags);
+}
+
+static void sci_stop_rx(struct uart_port *port)
+{
+ unsigned long flags;
+ unsigned short ctrl;
+
+ /* Clear RIE (Receive Interrupt Enable) bit in SCSCR */
+ local_irq_save(flags);
+ ctrl = sci_in(port, SCSCR);
+ ctrl &= ~(SCI_CTRL_FLAGS_RIE | SCI_CTRL_FLAGS_REIE);
+ sci_out(port, SCSCR, ctrl);
+ local_irq_restore(flags);
+}
+
+static void sci_enable_ms(struct uart_port *port)
+{
+ /* Nothing here yet .. */
+}
+
+static void sci_break_ctl(struct uart_port *port, int break_state)
+{
+ /* Nothing here yet .. */
+}
+
+static int sci_startup(struct uart_port *port)
+{
+ struct sci_port *s = &sci_ports[port->line];
+
+#if defined(__H8300S__)
+ h8300_sci_enable(port, sci_enable);
+#endif
+
+ sci_request_irq(s);
+ sci_start_tx(port, 1);
+ sci_start_rx(port, 1);
+
+ return 0;
+}
+
+static void sci_shutdown(struct uart_port *port)
+{
+ struct sci_port *s = &sci_ports[port->line];
+
+ sci_stop_rx(port);
+ sci_stop_tx(port, 1);
+ sci_free_irq(s);
+
+#if defined(__H8300S__)
+ h8300_sci_enable(port, sci_disable);
+#endif
+}
+
+static void sci_set_termios(struct uart_port *port, struct termios *termios,
+ struct termios *old)
+{
+ struct sci_port *s = &sci_ports[port->line];
+ unsigned int status, baud, smr_val;
+ unsigned long flags;
+ int t;
+
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ do {
+ status = sci_in(port, SCxSR);
+ } while (!(status & SCxSR_TEND(port)));
+
+ sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */
+
+#if !defined(SCI_ONLY)
+ if (port->type == PORT_SCIF) {
+ sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
+ }
+#endif
+
+ smr_val = sci_in(port, SCSMR) & 3;
+ if ((termios->c_cflag & CSIZE) == CS7)
+ smr_val |= 0x40;
+ if (termios->c_cflag & PARENB)
+ smr_val |= 0x20;
+ if (termios->c_cflag & PARODD)
+ smr_val |= 0x30;
+ if (termios->c_cflag & CSTOPB)
+ smr_val |= 0x08;
+
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ sci_out(port, SCSMR, smr_val);
+
+ switch (baud) {
+ case 0: t = -1; break;
+ case 2400: t = BPS_2400; break;
+ case 4800: t = BPS_4800; break;
+ case 9600: t = BPS_9600; break;
+ case 19200: t = BPS_19200; break;
+ case 38400: t = BPS_38400; break;
+ case 57600: t = BPS_57600; break;
+ case 115200: t = BPS_115200; break;
+ default: t = SCBRR_VALUE(baud); break;
+ }
+
+ if (t > 0) {
+ if(t >= 256) {
+ sci_out(port, SCSMR, (sci_in(port, SCSMR) & ~3) | 1);
+ t >>= 2;
+ } else {
+ sci_out(port, SCSMR, sci_in(port, SCSMR) & ~3);
+ }
+ sci_out(port, SCBRR, t);
+ udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
+ }
+
+ s->init_pins(port, termios->c_cflag);
+ sci_out(port, SCSCR, SCSCR_INIT(port));
+
+ if ((termios->c_cflag & CREAD) != 0)
+ sci_start_rx(port,0);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *sci_type(struct uart_port *port)
+{
+ switch (port->type) {
+ case PORT_SCI: return "sci";
+ case PORT_SCIF: return "scif";
+ case PORT_IRDA: return "irda";
+ }
+
+ return 0;
+}
+
+static void sci_release_port(struct uart_port *port)
+{
+ /* Nothing here yet .. */
+}
+
+static int sci_request_port(struct uart_port *port)
+{
+ /* Nothing here yet .. */
+ return 0;
+}
+
+static void sci_config_port(struct uart_port *port, int flags)
+{
+ struct sci_port *s = &sci_ports[port->line];
+
+ port->type = s->type;
+
+#if defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
+ if (port->mapbase == 0)
+ port->mapbase = onchip_remap(SCIF_ADDR_SH5, 1024, "SCIF");
+
+ port->membase = (void *)port->mapbase;
+#endif
+}
+
+static int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ struct sci_port *s = &sci_ports[port->line];
+
+ if (ser->irq != s->irqs[SCIx_TXI_IRQ] || ser->irq > NR_IRQS)
+ return -EINVAL;
+ if (ser->baud_base < 2400)
+ /* No paper tape reader for Mitch.. */
+ return -EINVAL;
+
+ return 0;
+}
+
+static struct uart_ops sci_uart_ops = {
+ .tx_empty = sci_tx_empty,
+ .set_mctrl = sci_set_mctrl,
+ .get_mctrl = sci_get_mctrl,
+ .start_tx = sci_start_tx,
+ .stop_tx = sci_stop_tx,
+ .stop_rx = sci_stop_rx,
+ .enable_ms = sci_enable_ms,
+ .break_ctl = sci_break_ctl,
+ .startup = sci_startup,
+ .shutdown = sci_shutdown,
+ .set_termios = sci_set_termios,
+ .type = sci_type,
+ .release_port = sci_release_port,
+ .request_port = sci_request_port,
+ .config_port = sci_config_port,
+ .verify_port = sci_verify_port,
+};
+
+static struct sci_port sci_ports[SCI_NPORTS] = {
+#if defined(CONFIG_CPU_SUBTYPE_SH7708)
+ {
+ .port = {
+ .membase = (void *)0xfffffe80,
+ .mapbase = 0xfffffe80,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 25,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .type = PORT_SCI,
+ .irqs = SCI_IRQS,
+ .init_pins = sci_init_pins_sci,
+ },
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
+ {
+ .port = {
+ .membase = (void *)SCIF0,
+ .mapbase = SCIF0,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 55,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH3_IRDA_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+ {
+ .port = {
+ .membase = (void *)SCIF2,
+ .mapbase = SCIF2,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 59,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 1,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH3_SCIF_IRQS,
+ .init_pins = sci_init_pins_scif,
+ }
+#elif defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
+ {
+ .port = {
+ .membase = (void *)0xfffffe80,
+ .mapbase = 0xfffffe80,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 25,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .type = PORT_SCI,
+ .irqs = SCI_IRQS,
+ .init_pins = sci_init_pins_sci,
+ },
+ {
+ .port = {
+ .membase = (void *)0xa4000150,
+ .mapbase = 0xa4000150,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 59,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 1,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH3_SCIF_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+ {
+ .port = {
+ .membase = (void *)0xa4000140,
+ .mapbase = 0xa4000140,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 55,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 2,
+ },
+ .type = PORT_IRDA,
+ .irqs = SH3_IRDA_IRQS,
+ .init_pins = sci_init_pins_irda,
+ }
+#elif defined(CONFIG_CPU_SUBTYPE_SH7300)
+ {
+ .port = {
+ .membase = (void *)0xA4430000,
+ .mapbase = 0xA4430000,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 25,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH7300_SCIF0_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+#elif defined(CONFIG_CPU_SUBTYPE_SH73180)
+ {
+ .port = {
+ .membase = (void *)0xffe00000,
+ .mapbase = 0xffe00000,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 25,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH73180_SCIF_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+#elif defined(CONFIG_SH_RTS7751R2D)
+ {
+ .port = {
+ .membase = (void *)0xffe80000,
+ .mapbase = 0xffe80000,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 43,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH4_SCIF_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751)
+ {
+ .port = {
+ .membase = (void *)0xffe00000,
+ .mapbase = 0xffe00000,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 25,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .type = PORT_SCI,
+ .irqs = SCI_IRQS,
+ .init_pins = sci_init_pins_sci,
+ },
+ {
+ .port = {
+ .membase = (void *)0xffe80000,
+ .mapbase = 0xffe80000,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 43,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 1,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH4_SCIF_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+#elif defined(CONFIG_CPU_SUBTYPE_SH7760)
+ {
+ .port = {
+ .membase = (void *)0xfe600000,
+ .mapbase = 0xfe600000,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 55,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH7760_SCIF0_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+ {
+ .port = {
+ .membase = (void *)0xfe610000,
+ .mapbase = 0xfe610000,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 75,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 1,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH7760_SCIF1_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+ {
+ .port = {
+ .membase = (void *)0xfe620000,
+ .mapbase = 0xfe620000,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 79,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 2,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH7760_SCIF2_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
+ {
+ .port = {
+ .membase = (void *)0xffe80000,
+ .mapbase = 0xffe80000,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 43,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH4_SCIF_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
+ {
+ .port = {
+ .membase = (void *)0xffe00000,
+ .mapbase = 0xffe00000,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 26,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .type = PORT_SCIF,
+ .irqs = STB1_SCIF1_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+ {
+ .port = {
+ .membase = (void *)0xffe80000,
+ .mapbase = 0xffe80000,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 43,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 1,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH4_SCIF_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
+ {
+ .port = {
+ .iotype = SERIAL_IO_MEM,
+ .irq = 42,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .type = PORT_SCIF,
+ .irqs = SH5_SCIF_IRQS,
+ .init_pins = sci_init_pins_scif,
+ },
+#elif defined(CONFIG_H83007) || defined(CONFIG_H83068)
+ {
+ .port = {
+ .membase = (void *)0x00ffffb0,
+ .mapbase = 0x00ffffb0,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 54,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .type = PORT_SCI,
+ .irqs = H8300H_SCI_IRQS0,
+ .init_pins = sci_init_pins_sci,
+ },
+ {
+ .port = {
+ .membase = (void *)0x00ffffb8,
+ .mapbase = 0x00ffffb8,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 58,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 1,
+ },
+ .type = PORT_SCI,
+ .irqs = H8300H_SCI_IRQS1,
+ .init_pins = sci_init_pins_sci,
+ },
+ {
+ .port = {
+ .membase = (void *)0x00ffffc0,
+ .mapbase = 0x00ffffc0,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 62,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 2,
+ },
+ .type = PORT_SCI,
+ .irqs = H8300H_SCI_IRQS2,
+ .init_pins = sci_init_pins_sci,
+ },
+#elif defined(CONFIG_H8S2678)
+ {
+ .port = {
+ .membase = (void *)0x00ffff78,
+ .mapbase = 0x00ffff78,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 90,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 0,
+ },
+ .type = PORT_SCI,
+ .irqs = H8S_SCI_IRQS0,
+ .init_pins = sci_init_pins_sci,
+ },
+ {
+ .port = {
+ .membase = (void *)0x00ffff80,
+ .mapbase = 0x00ffff80,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 94,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 1,
+ },
+ .type = PORT_SCI,
+ .irqs = H8S_SCI_IRQS1,
+ .init_pins = sci_init_pins_sci,
+ },
+ {
+ .port = {
+ .membase = (void *)0x00ffff88,
+ .mapbase = 0x00ffff88,
+ .iotype = SERIAL_IO_MEM,
+ .irq = 98,
+ .ops = &sci_uart_ops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .line = 2,
+ },
+ .type = PORT_SCI,
+ .irqs = H8S_SCI_IRQS2,
+ .init_pins = sci_init_pins_sci,
+ },
+#else
+#error "CPU subtype not defined"
+#endif
+};
+
+#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ */
+static void serial_console_write(struct console *co, const char *s,
+ unsigned count)
+{
+ put_string(serial_console_port, s, count);
+}
+
+static int __init serial_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+ int ret;
+
+ if (co->index >= SCI_NPORTS)
+ co->index = 0;
+
+ serial_console_port = &sci_ports[co->index];
+ port = &serial_console_port->port;
+ port->type = serial_console_port->type;
+
+#ifdef CONFIG_SUPERH64
+ /* This is especially needed on sh64 to remap the SCIF */
+ sci_config_port(port, 0);
+#endif
+
+ /*
+ * We need to set the initial uartclk here, since otherwise it will
+ * only ever be setup at sci_init() time.
+ */
+#if !defined(__H8300H__) && !defined(__H8300S__)
+ port->uartclk = current_cpu_data.module_clock * 16;
+#else
+ port->uartclk = CONFIG_CPU_CLOCK;
+#endif
+#if defined(__H8300S__)
+ h8300_sci_enable(port, sci_enable);
+#endif
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ ret = uart_set_options(port, co, baud, parity, bits, flow);
+#if defined(__H8300H__) || defined(__H8300S__)
+ /* disable rx interrupt */
+ if (ret == 0)
+ sci_stop_rx(port);
+#endif
+ return ret;
+}
+
+static struct console serial_console = {
+ .name = "ttySC",
+ .device = uart_console_device,
+ .write = serial_console_write,
+ .setup = serial_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &sci_uart_driver,
+};
+
+static int __init sci_console_init(void)
+{
+ register_console(&serial_console);
+ return 0;
+}
+
+console_initcall(sci_console_init);
+#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
+
+#ifdef CONFIG_SH_KGDB
+/*
+ * FIXME: Most of this can go away.. at the moment, we rely on
+ * arch/sh/kernel/setup.c to do the command line parsing for kgdb, though
+ * most of that can easily be done here instead.
+ *
+ * For the time being, just accept the values that were parsed earlier..
+ */
+static void __init kgdb_console_get_options(struct uart_port *port, int *baud,
+ int *parity, int *bits)
+{
+ *baud = kgdb_baud;
+ *parity = tolower(kgdb_parity);
+ *bits = kgdb_bits - '0';
+}
+
+/*
+ * The naming here is somewhat misleading, since kgdb_console_setup() takes
+ * care of the early-on initialization for kgdb, regardless of whether we
+ * actually use kgdb as a console or not.
+ *
+ * On the plus side, this lets us kill off the old kgdb_sci_setup() nonsense.
+ */
+int __init kgdb_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port = &sci_ports[kgdb_portnum].port;
+ int baud = 38400;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (co->index >= SCI_NPORTS || co->index != kgdb_portnum)
+ co->index = kgdb_portnum;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ else
+ kgdb_console_get_options(port, &baud, &parity, &bits);
+
+ kgdb_getchar = kgdb_sci_getchar;
+ kgdb_putchar = kgdb_sci_putchar;
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+#endif /* CONFIG_SH_KGDB */
+
+#ifdef CONFIG_SH_KGDB_CONSOLE
+static struct console kgdb_console = {
+ .name = "ttySC",
+ .write = kgdb_console_write,
+ .setup = kgdb_console_setup,
+ .flags = CON_PRINTBUFFER | CON_ENABLED,
+ .index = -1,
+ .data = &sci_uart_driver,
+};
+
+/* Register the KGDB console so we get messages (d'oh!) */
+static int __init kgdb_console_init(void)
+{
+ register_console(&kgdb_console);
+ return 0;
+}
+
+console_initcall(kgdb_console_init);
+#endif /* CONFIG_SH_KGDB_CONSOLE */
+
+#if defined(CONFIG_SH_KGDB_CONSOLE)
+#define SCI_CONSOLE &kgdb_console
+#elif defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
+#define SCI_CONSOLE &serial_console
+#else
+#define SCI_CONSOLE 0
+#endif
+
+static char banner[] __initdata =
+ KERN_INFO "SuperH SCI(F) driver initialized\n";
+
+static struct uart_driver sci_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "sci",
+#ifdef CONFIG_DEVFS_FS
+ .devfs_name = "ttsc/",
+#endif
+ .dev_name = "ttySC",
+ .major = SCI_MAJOR,
+ .minor = SCI_MINOR_START,
+ .nr = SCI_NPORTS,
+ .cons = SCI_CONSOLE,
+};
+
+static int __init sci_init(void)
+{
+ int chan, ret;
+
+ printk("%s", banner);
+
+ ret = uart_register_driver(&sci_uart_driver);
+ if (ret == 0) {
+ for (chan = 0; chan < SCI_NPORTS; chan++) {
+ struct sci_port *sciport = &sci_ports[chan];
+
+#if !defined(__H8300H__) && !defined(__H8300S__)
+ sciport->port.uartclk = (current_cpu_data.module_clock * 16);
+#else
+ sciport->port.uartclk = CONFIG_CPU_CLOCK;
+#endif
+ uart_add_one_port(&sci_uart_driver, &sciport->port);
+ sciport->break_timer.data = (unsigned long)sciport;
+ sciport->break_timer.function = sci_break_timer;
+ init_timer(&sciport->break_timer);
+ }
+ }
+
+#ifdef CONFIG_CPU_FREQ
+ cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER);
+ printk("sci: CPU frequency notifier registered\n");
+#endif
+
+#ifdef CONFIG_SH_STANDARD_BIOS
+ sh_bios_gdb_detach();
+#endif
+
+ return ret;
+}
+
+static void __exit sci_exit(void)
+{
+ int chan;
+
+ for (chan = 0; chan < SCI_NPORTS; chan++)
+ uart_remove_one_port(&sci_uart_driver, &sci_ports[chan].port);
+
+ uart_unregister_driver(&sci_uart_driver);
+}
+
+module_init(sci_init);
+module_exit(sci_exit);
+
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
new file mode 100644
index 00000000000..2892169eff0
--- /dev/null
+++ b/drivers/serial/sh-sci.h
@@ -0,0 +1,573 @@
+/* $Id: sh-sci.h,v 1.4 2004/02/19 16:43:56 lethal Exp $
+ *
+ * linux/drivers/serial/sh-sci.h
+ *
+ * SuperH on-chip serial module support. (SCI with no FIFO / with FIFO)
+ * Copyright (C) 1999, 2000 Niibe Yutaka
+ * Copyright (C) 2000 Greg Banks
+ * Copyright (C) 2002, 2003 Paul Mundt
+ * Modified to support multiple serial ports. Stuart Menefy (May 2000).
+ * Modified to support SH7300(SH-Mobile) SCIF. Takashi Kusuda (Jun 2003).
+ * Modified to support H8/300 Series Yoshinori Sato (Feb 2004).
+ */
+#include <linux/config.h>
+#include <linux/serial_core.h>
+
+#if defined(__H8300H__) || defined(__H8300S__)
+#include <asm/gpio.h>
+#if defined(CONFIG_H83007) || defined(CONFIG_H83068)
+#include <asm/regs306x.h>
+#endif
+#if defined(CONFIG_H8S2678)
+#include <asm/regs267x.h>
+#endif
+#endif
+
+/* Offsets into the sci_port->irqs array */
+#define SCIx_ERI_IRQ 0
+#define SCIx_RXI_IRQ 1
+#define SCIx_TXI_IRQ 2
+
+/* ERI, RXI, TXI, BRI */
+#define SCI_IRQS { 23, 24, 25, 0 }
+#define SH3_SCIF_IRQS { 56, 57, 59, 58 }
+#define SH3_IRDA_IRQS { 52, 53, 55, 54 }
+#define SH4_SCIF_IRQS { 40, 41, 43, 42 }
+#define STB1_SCIF1_IRQS {23, 24, 26, 25 }
+#define SH7760_SCIF0_IRQS { 52, 53, 55, 54 }
+#define SH7760_SCIF1_IRQS { 72, 73, 75, 74 }
+#define SH7760_SCIF2_IRQS { 76, 77, 79, 78 }
+#define SH7300_SCIF0_IRQS {80, 80, 80, 80 }
+#define SH73180_SCIF_IRQS {80, 81, 83, 82 }
+#define H8300H_SCI_IRQS0 {52, 53, 54, 0 }
+#define H8300H_SCI_IRQS1 {56, 57, 58, 0 }
+#define H8300H_SCI_IRQS2 {60, 61, 62, 0 }
+#define H8S_SCI_IRQS0 {88, 89, 90, 0 }
+#define H8S_SCI_IRQS1 {92, 93, 94, 0 }
+#define H8S_SCI_IRQS2 {96, 97, 98, 0 }
+#define SH5_SCIF_IRQS {39, 40, 42, 0 }
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7708)
+# define SCI_NPORTS 1
+# define SCSPTR 0xffffff7c /* 8 bit */
+# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
+# define SCI_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
+# define SCI_NPORTS 3
+# define SCPCR 0xA4000116 /* 16 bit SCI and SCIF */
+# define SCPDR 0xA4000136 /* 8 bit SCI and SCIF */
+# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
+# define SCI_AND_SCIF
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
+# define SCIF0 0xA4400000
+# define SCIF2 0xA4410000
+# define SCSMR_Ir 0xA44A0000
+# define IRDA_SCIF SCIF0
+# define SCI_NPORTS 2
+# define SCPCR 0xA4000116
+# define SCPDR 0xA4000136
+
+/* Set the clock source,
+ * SCIF2 (0xA4410000) -> External clock, SCK pin used as clock input
+ * SCIF0 (0xA4400000) -> Internal clock, SCK pin as serial clock output
+ */
+# define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
+# define SCIF_ONLY
+#elif defined(CONFIG_SH_RTS7751R2D)
+# define SCI_NPORTS 1
+# define SCSPTR1 0xffe0001c /* 8 bit SCI */
+# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
+# define SCIF_ORER 0x0001 /* overrun error bit */
+# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+# define SCIF_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751)
+# define SCI_NPORTS 2
+# define SCSPTR1 0xffe0001c /* 8 bit SCI */
+# define SCSPTR2 0xFFE80020 /* 16 bit SCIF */
+# define SCIF_ORER 0x0001 /* overrun error bit */
+# define SCSCR_INIT(port) (((port)->type == PORT_SCI) ? \
+ 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \
+ 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ )
+# define SCI_AND_SCIF
+#elif defined(CONFIG_CPU_SUBTYPE_SH7760)
+# define SCI_NPORTS 3
+# define SCSPTR0 0xfe600000 /* 16 bit SCIF */
+# define SCSPTR1 0xfe610000 /* 16 bit SCIF */
+# define SCSPTR2 0xfe620000 /* 16 bit SCIF */
+# define SCIF_ORER 0x0001 /* overrun error bit */
+# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+# define SCIF_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_SH7300)
+# define SCI_NPORTS 1
+# define SCPCR 0xA4050116 /* 16 bit SCIF */
+# define SCPDR 0xA4050136 /* 16 bit SCIF */
+# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
+# define SCIF_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_SH73180)
+# define SCI_NPORTS 1
+# define SCPDR 0xA4050138 /* 16 bit SCIF */
+# define SCSPTR2 SCPDR
+# define SCIF_ORER 0x0001 /* overrun error bit */
+# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1 */
+# define SCIF_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
+# define SCI_NPORTS 1
+# define SCSPTR2 0xffe80020 /* 16 bit SCIF */
+# define SCIF_ORER 0x0001 /* overrun error bit */
+# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+# define SCIF_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
+# define SCI_NPORTS 2
+# define SCSPTR1 0xffe00020 /* 16 bit SCIF */
+# define SCSPTR2 0xffe80020 /* 16 bit SCIF */
+# define SCIF_ORER 0x0001 /* overrun error bit */
+# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+# define SCIF_ONLY
+#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
+# include <asm/hardware.h>
+# define SCIF_BASE_ADDR 0x01030000
+# define SCIF_ADDR_SH5 PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR
+# define SCIF_PTR2_OFFS 0x0000020
+# define SCIF_LSR2_OFFS 0x0000024
+# define SCI_NPORTS 1
+# define SCI_INIT { \
+ { {}, PORT_SCIF, 0, \
+ SH5_SCIF_IRQS, sci_init_pins_scif } \
+}
+# define SCSPTR2 ((port->mapbase)+SCIF_PTR2_OFFS) /* 16 bit SCIF */
+# define SCLSR2 ((port->mapbase)+SCIF_LSR2_OFFS) /* 16 bit SCIF */
+# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,
+ TE=1,RE=1,REIE=1 */
+# define SCIF_ONLY
+#elif defined(CONFIG_H83007) || defined(CONFIG_H83068)
+# define SCI_NPORTS 3
+# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
+# define SCI_ONLY
+# define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
+#elif defined(CONFIG_H8S2678)
+# define SCI_NPORTS 3
+# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
+# define SCI_ONLY
+# define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
+#else
+# error CPU subtype not defined
+#endif
+
+/* SCSCR */
+#define SCI_CTRL_FLAGS_TIE 0x80 /* all */
+#define SCI_CTRL_FLAGS_RIE 0x40 /* all */
+#define SCI_CTRL_FLAGS_TE 0x20 /* all */
+#define SCI_CTRL_FLAGS_RE 0x10 /* all */
+#if defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751)
+#define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */
+#else
+#define SCI_CTRL_FLAGS_REIE 0
+#endif
+/* SCI_CTRL_FLAGS_MPIE 0x08 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
+/* SCI_CTRL_FLAGS_TEIE 0x04 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
+/* SCI_CTRL_FLAGS_CKE1 0x02 * all */
+/* SCI_CTRL_FLAGS_CKE0 0x01 * 7707 SCI/SCIF, 7708 SCI, 7709 SCI/SCIF, 7750 SCI */
+
+/* SCxSR SCI */
+#define SCI_TDRE 0x80 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
+#define SCI_RDRF 0x40 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
+#define SCI_ORER 0x20 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
+#define SCI_FER 0x10 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
+#define SCI_PER 0x08 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
+#define SCI_TEND 0x04 /* 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
+/* SCI_MPB 0x02 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
+/* SCI_MPBT 0x01 * 7707 SCI, 7708 SCI, 7709 SCI, 7750 SCI */
+
+#define SCI_ERRORS ( SCI_PER | SCI_FER | SCI_ORER)
+
+/* SCxSR SCIF */
+#define SCIF_ER 0x0080 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
+#define SCIF_TEND 0x0040 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
+#define SCIF_TDFE 0x0020 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
+#define SCIF_BRK 0x0010 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
+#define SCIF_FER 0x0008 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
+#define SCIF_PER 0x0004 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
+#define SCIF_RDF 0x0002 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
+#define SCIF_DR 0x0001 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
+#define SCIF_ORER 0x0200
+#define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER)
+#define SCIF_RFDC_MASK 0x007f
+#define SCIF_TXROOM_MAX 64
+#else
+#define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK)
+#define SCIF_RFDC_MASK 0x001f
+#define SCIF_TXROOM_MAX 16
+#endif
+
+#if defined(SCI_ONLY)
+# define SCxSR_TEND(port) SCI_TEND
+# define SCxSR_ERRORS(port) SCI_ERRORS
+# define SCxSR_RDxF(port) SCI_RDRF
+# define SCxSR_TDxE(port) SCI_TDRE
+# define SCxSR_ORER(port) SCI_ORER
+# define SCxSR_FER(port) SCI_FER
+# define SCxSR_PER(port) SCI_PER
+# define SCxSR_BRK(port) 0x00
+# define SCxSR_RDxF_CLEAR(port) 0xbc
+# define SCxSR_ERROR_CLEAR(port) 0xc4
+# define SCxSR_TDxE_CLEAR(port) 0x78
+# define SCxSR_BREAK_CLEAR(port) 0xc4
+#elif defined(SCIF_ONLY)
+# define SCxSR_TEND(port) SCIF_TEND
+# define SCxSR_ERRORS(port) SCIF_ERRORS
+# define SCxSR_RDxF(port) SCIF_RDF
+# define SCxSR_TDxE(port) SCIF_TDFE
+#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
+# define SCxSR_ORER(port) SCIF_ORER
+#else
+# define SCxSR_ORER(port) 0x0000
+#endif
+# define SCxSR_FER(port) SCIF_FER
+# define SCxSR_PER(port) SCIF_PER
+# define SCxSR_BRK(port) SCIF_BRK
+#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
+# define SCxSR_RDxF_CLEAR(port) (sci_in(port,SCxSR)&0xfffc)
+# define SCxSR_ERROR_CLEAR(port) (sci_in(port,SCxSR)&0xfd73)
+# define SCxSR_TDxE_CLEAR(port) (sci_in(port,SCxSR)&0xffdf)
+# define SCxSR_BREAK_CLEAR(port) (sci_in(port,SCxSR)&0xffe3)
+#else
+/* SH7705 can also use this, clearing is same between 7705 and 7709 and 7300 */
+# define SCxSR_RDxF_CLEAR(port) 0x00fc
+# define SCxSR_ERROR_CLEAR(port) 0x0073
+# define SCxSR_TDxE_CLEAR(port) 0x00df
+# define SCxSR_BREAK_CLEAR(port) 0x00e3
+#endif
+#else
+# define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND)
+# define SCxSR_ERRORS(port) (((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS)
+# define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF)
+# define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE)
+# define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : 0x0000)
+# define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER)
+# define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER)
+# define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK)
+# define SCxSR_RDxF_CLEAR(port) (((port)->type == PORT_SCI) ? 0xbc : 0x00fc)
+# define SCxSR_ERROR_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x0073)
+# define SCxSR_TDxE_CLEAR(port) (((port)->type == PORT_SCI) ? 0x78 : 0x00df)
+# define SCxSR_BREAK_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x00e3)
+#endif
+
+/* SCFCR */
+#define SCFCR_RFRST 0x0002
+#define SCFCR_TFRST 0x0004
+#define SCFCR_TCRST 0x4000
+#define SCFCR_MCE 0x0008
+
+#define SCI_MAJOR 204
+#define SCI_MINOR_START 8
+
+/* Generic serial flags */
+#define SCI_RX_THROTTLE 0x0000001
+
+#define SCI_MAGIC 0xbabeface
+
+/*
+ * Events are used to schedule things to happen at timer-interrupt
+ * time, instead of at rs interrupt time.
+ */
+#define SCI_EVENT_WRITE_WAKEUP 0
+
+struct sci_port {
+ struct uart_port port;
+ int type;
+ unsigned char irqs[4]; /* ERI, RXI, TXI, BRI */
+ void (*init_pins)(struct uart_port *port, unsigned int cflag);
+ int break_flag;
+ struct timer_list break_timer;
+};
+
+#define SCI_IN(size, offset) \
+ unsigned int addr = port->mapbase + (offset); \
+ if ((size) == 8) { \
+ return ctrl_inb(addr); \
+ } else { \
+ return ctrl_inw(addr); \
+ }
+#define SCI_OUT(size, offset, value) \
+ unsigned int addr = port->mapbase + (offset); \
+ if ((size) == 8) { \
+ ctrl_outb(value, addr); \
+ } else { \
+ ctrl_outw(value, addr); \
+ }
+
+#define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\
+ static inline unsigned int sci_##name##_in(struct uart_port *port) \
+ { \
+ if (port->type == PORT_SCI) { \
+ SCI_IN(sci_size, sci_offset) \
+ } else { \
+ SCI_IN(scif_size, scif_offset); \
+ } \
+ } \
+ static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \
+ { \
+ if (port->type == PORT_SCI) { \
+ SCI_OUT(sci_size, sci_offset, value) \
+ } else { \
+ SCI_OUT(scif_size, scif_offset, value); \
+ } \
+ }
+
+#define CPU_SCIF_FNS(name, scif_offset, scif_size) \
+ static inline unsigned int sci_##name##_in(struct uart_port *port) \
+ { \
+ SCI_IN(scif_size, scif_offset); \
+ } \
+ static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \
+ { \
+ SCI_OUT(scif_size, scif_offset, value); \
+ }
+
+#define CPU_SCI_FNS(name, sci_offset, sci_size) \
+ static inline unsigned int sci_##name##_in(struct uart_port* port) \
+ { \
+ SCI_IN(sci_size, sci_offset); \
+ } \
+ static inline void sci_##name##_out(struct uart_port* port, unsigned int value) \
+ { \
+ SCI_OUT(sci_size, sci_offset, value); \
+ }
+
+#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
+#define SCIF_FNS(name, scif_offset, scif_size) \
+ CPU_SCIF_FNS(name, scif_offset, scif_size)
+#else
+#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \
+ sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \
+ h8_sci_offset, h8_sci_size) \
+ CPU_SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh3_scif_offset, sh3_scif_size)
+#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \
+ CPU_SCIF_FNS(name, sh3_scif_offset, sh3_scif_size)
+#endif
+#elif defined(__H8300H__) || defined(__H8300S__)
+#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \
+ sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \
+ h8_sci_offset, h8_sci_size) \
+ CPU_SCI_FNS(name, h8_sci_offset, h8_sci_size)
+#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size)
+#else
+#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \
+ sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \
+ h8_sci_offset, h8_sci_size) \
+ CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size, sh4_scif_offset, sh4_scif_size)
+#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \
+ CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
+#endif
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
+SCIF_FNS(SCSMR, 0x00, 16)
+SCIF_FNS(SCBRR, 0x04, 8)
+SCIF_FNS(SCSCR, 0x08, 16)
+SCIF_FNS(SCTDSR, 0x0c, 8)
+SCIF_FNS(SCFER, 0x10, 16)
+SCIF_FNS(SCxSR, 0x14, 16)
+SCIF_FNS(SCFCR, 0x18, 16)
+SCIF_FNS(SCFDR, 0x1c, 16)
+SCIF_FNS(SCxTDR, 0x20, 8)
+SCIF_FNS(SCxRDR, 0x24, 8)
+SCIF_FNS(SCLSR, 0x24, 16)
+#else
+/* reg SCI/SH3 SCI/SH4 SCIF/SH3 SCIF/SH4 SCI/H8*/
+/* name off sz off sz off sz off sz off sz*/
+SCIx_FNS(SCSMR, 0x00, 8, 0x00, 8, 0x00, 8, 0x00, 16, 0x00, 8)
+SCIx_FNS(SCBRR, 0x02, 8, 0x04, 8, 0x02, 8, 0x04, 8, 0x01, 8)
+SCIx_FNS(SCSCR, 0x04, 8, 0x08, 8, 0x04, 8, 0x08, 16, 0x02, 8)
+SCIx_FNS(SCxTDR, 0x06, 8, 0x0c, 8, 0x06, 8, 0x0C, 8, 0x03, 8)
+SCIx_FNS(SCxSR, 0x08, 8, 0x10, 8, 0x08, 16, 0x10, 16, 0x04, 8)
+SCIx_FNS(SCxRDR, 0x0a, 8, 0x14, 8, 0x0A, 8, 0x14, 8, 0x05, 8)
+SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16)
+SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16)
+SCIF_FNS(SCSPTR, 0, 0, 0x20, 16)
+SCIF_FNS(SCLSR, 0, 0, 0x24, 16)
+#endif
+#define sci_in(port, reg) sci_##reg##_in(port)
+#define sci_out(port, reg, value) sci_##reg##_out(port, value)
+
+/* H8/300 series SCI pins assignment */
+#if defined(__H8300H__) || defined(__H8300S__)
+static const struct __attribute__((packed)) {
+ int port; /* GPIO port no */
+ unsigned short rx,tx; /* GPIO bit no */
+} h8300_sci_pins[] = {
+#if defined(CONFIG_H83007) || defined(CONFIG_H83068)
+ { /* SCI0 */
+ .port = H8300_GPIO_P9,
+ .rx = H8300_GPIO_B2,
+ .tx = H8300_GPIO_B0,
+ },
+ { /* SCI1 */
+ .port = H8300_GPIO_P9,
+ .rx = H8300_GPIO_B3,
+ .tx = H8300_GPIO_B1,
+ },
+ { /* SCI2 */
+ .port = H8300_GPIO_PB,
+ .rx = H8300_GPIO_B7,
+ .tx = H8300_GPIO_B6,
+ }
+#elif defined(CONFIG_H8S2678)
+ { /* SCI0 */
+ .port = H8300_GPIO_P3,
+ .rx = H8300_GPIO_B2,
+ .tx = H8300_GPIO_B0,
+ },
+ { /* SCI1 */
+ .port = H8300_GPIO_P3,
+ .rx = H8300_GPIO_B3,
+ .tx = H8300_GPIO_B1,
+ },
+ { /* SCI2 */
+ .port = H8300_GPIO_P5,
+ .rx = H8300_GPIO_B1,
+ .tx = H8300_GPIO_B0,
+ }
+#endif
+};
+#endif
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7708)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+ if (port->mapbase == 0xfffffe80)
+ return ctrl_inb(SCSPTR)&0x01 ? 1 : 0; /* SCI */
+ return 1;
+}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+ if (port->mapbase == 0xfffffe80)
+ return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCI */
+ if (port->mapbase == 0xa4000150)
+ return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */
+ if (port->mapbase == 0xa4000140)
+ return ctrl_inb(SCPDR)&0x04 ? 1 : 0; /* IRDA */
+ return 1;
+}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+ if (port->mapbase == SCIF0)
+ return ctrl_inb(SCPDR)&0x04 ? 1 : 0; /* IRDA */
+ if (port->mapbase == SCIF2)
+ return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */
+ return 1;
+}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7751) || \
+ defined(CONFIG_CPU_SUBTYPE_SH4_202)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+#ifndef SCIF_ONLY
+ if (port->mapbase == 0xffe00000)
+ return ctrl_inb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */
+#endif
+#ifndef SCI_ONLY
+ if (port->mapbase == 0xffe80000)
+ return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
+#endif
+ return 1;
+}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7760)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+ if (port->mapbase == 0xfe600000)
+ return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+ if (port->mapbase == 0xfe610000)
+ return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+ if (port->mapbase == 0xfe620000)
+ return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
+}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7300)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+ if (port->mapbase == 0xa4430000)
+ return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCIF0 */
+ return 1;
+}
+#elif defined(CONFIG_CPU_SUBTYPE_SH73180)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+ return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCIF0 */
+}
+#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+ if (port->mapbase == 0xffe00000)
+ return ctrl_inw(SCSPTR1)&0x0001 ? 1 : 0; /* SCIF */
+ else
+ return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */
+
+}
+#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+ return sci_in(port, SCSPTR)&0x0001 ? 1 : 0; /* SCIF */
+}
+#elif defined(__H8300H__) || defined(__H8300S__)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+ int ch = (port->mapbase - SMR0) >> 3;
+ return (H8300_SCI_DR(ch) & h8300_sci_pins[ch].rx) ? 1 : 0;
+}
+#endif
+
+/*
+ * Values for the BitRate Register (SCBRR)
+ *
+ * The values are actually divisors for a frequency which can
+ * be internal to the SH3 (14.7456MHz) or derived from an external
+ * clock source. This driver assumes the internal clock is used;
+ * to support using an external clock source, config options or
+ * possibly command-line options would need to be added.
+ *
+ * Also, to support speeds below 2400 (why?) the lower 2 bits of
+ * the SCSMR register would also need to be set to non-zero values.
+ *
+ * -- Greg Banks 27Feb2000
+ *
+ * Answer: The SCBRR register is only eight bits, and the value in
+ * it gets larger with lower baud rates. At around 2400 (depending on
+ * the peripherial module clock) you run out of bits. However the
+ * lower two bits of SCSMR allow the module clock to be divided down,
+ * scaling the value which is needed in SCBRR.
+ *
+ * -- Stuart Menefy - 23 May 2000
+ *
+ * I meant, why would anyone bother with bitrates below 2400.
+ *
+ * -- Greg Banks - 7Jul2000
+ *
+ * You "speedist"! How will I use my 110bps ASR-33 teletype with paper
+ * tape reader as a console!
+ *
+ * -- Mitch Davis - 15 Jul 2000
+ */
+
+#define PCLK (current_cpu_data.module_clock)
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7300)
+#define SCBRR_VALUE(bps) ((PCLK+16*bps)/(16*bps)-1)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
+#define SCBRR_VALUE(bps) (((PCLK*2)+16*bps)/(32*bps)-1)
+#elif !defined(__H8300H__) && !defined(__H8300S__)
+#define SCBRR_VALUE(bps) ((PCLK+16*bps)/(32*bps)-1)
+#else
+#define SCBRR_VALUE(bps) (((CONFIG_CPU_CLOCK*1000/32)/bps)-1)
+#endif
+#define BPS_2400 SCBRR_VALUE(2400)
+#define BPS_4800 SCBRR_VALUE(4800)
+#define BPS_9600 SCBRR_VALUE(9600)
+#define BPS_19200 SCBRR_VALUE(19200)
+#define BPS_38400 SCBRR_VALUE(38400)
+#define BPS_57600 SCBRR_VALUE(57600)
+#define BPS_115200 SCBRR_VALUE(115200)
+
diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c
new file mode 100644
index 00000000000..ffaab9b90fd
--- /dev/null
+++ b/drivers/serial/sn_console.c
@@ -0,0 +1,1124 @@
+/*
+ * C-Brick Serial Port (and console) driver for SGI Altix machines.
+ *
+ * This driver is NOT suitable for talking to the l1-controller for
+ * anything other than 'console activities' --- please use the l1
+ * driver for that.
+ *
+ *
+ * Copyright (c) 2004-2005 Silicon Graphics, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * Further, this software is distributed without any warranty that it is
+ * free of the rightful claim of any third person regarding infringement
+ * or the like. Any license provided herein, whether implied or
+ * otherwise, applies only to this software file. Patent licenses, if
+ * any, provided herein do not apply to combinations of this program with
+ * other software, or any other product whatsoever.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Contact information: Silicon Graphics, Inc., 1500 Crittenden Lane,
+ * Mountain View, CA 94043, or:
+ *
+ * http://www.sgi.com
+ *
+ * For further information regarding this notice, see:
+ *
+ * http://oss.sgi.com/projects/GenInfo/NoticeExplan
+ */
+
+#include <linux/config.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/console.h>
+#include <linux/module.h>
+#include <linux/sysrq.h>
+#include <linux/circ_buf.h>
+#include <linux/serial_reg.h>
+#include <linux/delay.h> /* for mdelay */
+#include <linux/miscdevice.h>
+#include <linux/serial_core.h>
+
+#include <asm/io.h>
+#include <asm/sn/simulator.h>
+#include <asm/sn/sn_sal.h>
+
+/* number of characters we can transmit to the SAL console at a time */
+#define SN_SAL_MAX_CHARS 120
+
+/* 64K, when we're asynch, it must be at least printk's LOG_BUF_LEN to
+ * avoid losing chars, (always has to be a power of 2) */
+#define SN_SAL_BUFFER_SIZE (64 * (1 << 10))
+
+#define SN_SAL_UART_FIFO_DEPTH 16
+#define SN_SAL_UART_FIFO_SPEED_CPS 9600/10
+
+/* sn_transmit_chars() calling args */
+#define TRANSMIT_BUFFERED 0
+#define TRANSMIT_RAW 1
+
+/* To use dynamic numbers only and not use the assigned major and minor,
+ * define the following.. */
+ /* #define USE_DYNAMIC_MINOR 1 *//* use dynamic minor number */
+#define USE_DYNAMIC_MINOR 0 /* Don't rely on misc_register dynamic minor */
+
+/* Device name we're using */
+#define DEVICE_NAME "ttySG"
+#define DEVICE_NAME_DYNAMIC "ttySG0" /* need full name for misc_register */
+/* The major/minor we are using, ignored for USE_DYNAMIC_MINOR */
+#define DEVICE_MAJOR 204
+#define DEVICE_MINOR 40
+
+#ifdef CONFIG_MAGIC_SYSRQ
+static char sysrq_serial_str[] = "\eSYS";
+static char *sysrq_serial_ptr = sysrq_serial_str;
+static unsigned long sysrq_requested;
+#endif /* CONFIG_MAGIC_SYSRQ */
+
+/*
+ * Port definition - this kinda drives it all
+ */
+struct sn_cons_port {
+ struct timer_list sc_timer;
+ struct uart_port sc_port;
+ struct sn_sal_ops {
+ int (*sal_puts_raw) (const char *s, int len);
+ int (*sal_puts) (const char *s, int len);
+ int (*sal_getc) (void);
+ int (*sal_input_pending) (void);
+ void (*sal_wakeup_transmit) (struct sn_cons_port *, int);
+ } *sc_ops;
+ unsigned long sc_interrupt_timeout;
+ int sc_is_asynch;
+};
+
+static struct sn_cons_port sal_console_port;
+static int sn_process_input;
+
+/* Only used if USE_DYNAMIC_MINOR is set to 1 */
+static struct miscdevice misc; /* used with misc_register for dynamic */
+
+extern void early_sn_setup(void);
+
+#undef DEBUG
+#ifdef DEBUG
+static int sn_debug_printf(const char *fmt, ...);
+#define DPRINTF(x...) sn_debug_printf(x)
+#else
+#define DPRINTF(x...) do { } while (0)
+#endif
+
+/* Prototypes */
+static int snt_hw_puts_raw(const char *, int);
+static int snt_hw_puts_buffered(const char *, int);
+static int snt_poll_getc(void);
+static int snt_poll_input_pending(void);
+static int snt_intr_getc(void);
+static int snt_intr_input_pending(void);
+static void sn_transmit_chars(struct sn_cons_port *, int);
+
+/* A table for polling:
+ */
+static struct sn_sal_ops poll_ops = {
+ .sal_puts_raw = snt_hw_puts_raw,
+ .sal_puts = snt_hw_puts_raw,
+ .sal_getc = snt_poll_getc,
+ .sal_input_pending = snt_poll_input_pending
+};
+
+/* A table for interrupts enabled */
+static struct sn_sal_ops intr_ops = {
+ .sal_puts_raw = snt_hw_puts_raw,
+ .sal_puts = snt_hw_puts_buffered,
+ .sal_getc = snt_intr_getc,
+ .sal_input_pending = snt_intr_input_pending,
+ .sal_wakeup_transmit = sn_transmit_chars
+};
+
+/* the console does output in two distinctly different ways:
+ * synchronous (raw) and asynchronous (buffered). initally, early_printk
+ * does synchronous output. any data written goes directly to the SAL
+ * to be output (incidentally, it is internally buffered by the SAL)
+ * after interrupts and timers are initialized and available for use,
+ * the console init code switches to asynchronous output. this is
+ * also the earliest opportunity to begin polling for console input.
+ * after console initialization, console output and tty (serial port)
+ * output is buffered and sent to the SAL asynchronously (either by
+ * timer callback or by UART interrupt) */
+
+/* routines for running the console in polling mode */
+
+/**
+ * snt_poll_getc - Get a character from the console in polling mode
+ *
+ */
+static int snt_poll_getc(void)
+{
+ int ch;
+
+ ia64_sn_console_getc(&ch);
+ return ch;
+}
+
+/**
+ * snt_poll_input_pending - Check if any input is waiting - polling mode.
+ *
+ */
+static int snt_poll_input_pending(void)
+{
+ int status, input;
+
+ status = ia64_sn_console_check(&input);
+ return !status && input;
+}
+
+/* routines for an interrupt driven console (normal) */
+
+/**
+ * snt_intr_getc - Get a character from the console, interrupt mode
+ *
+ */
+static int snt_intr_getc(void)
+{
+ return ia64_sn_console_readc();
+}
+
+/**
+ * snt_intr_input_pending - Check if input is pending, interrupt mode
+ *
+ */
+static int snt_intr_input_pending(void)
+{
+ return ia64_sn_console_intr_status() & SAL_CONSOLE_INTR_RECV;
+}
+
+/* these functions are polled and interrupt */
+
+/**
+ * snt_hw_puts_raw - Send raw string to the console, polled or interrupt mode
+ * @s: String
+ * @len: Length
+ *
+ */
+static int snt_hw_puts_raw(const char *s, int len)
+{
+ /* this will call the PROM and not return until this is done */
+ return ia64_sn_console_putb(s, len);
+}
+
+/**
+ * snt_hw_puts_buffered - Send string to console, polled or interrupt mode
+ * @s: String
+ * @len: Length
+ *
+ */
+static int snt_hw_puts_buffered(const char *s, int len)
+{
+ /* queue data to the PROM */
+ return ia64_sn_console_xmit_chars((char *)s, len);
+}
+
+/* uart interface structs
+ * These functions are associated with the uart_port that the serial core
+ * infrastructure calls.
+ *
+ * Note: Due to how the console works, many routines are no-ops.
+ */
+
+/**
+ * snp_type - What type of console are we?
+ * @port: Port to operate with (we ignore since we only have one port)
+ *
+ */
+static const char *snp_type(struct uart_port *port)
+{
+ return ("SGI SN L1");
+}
+
+/**
+ * snp_tx_empty - Is the transmitter empty? We pretend we're always empty
+ * @port: Port to operate on (we ignore since we only have one port)
+ *
+ */
+static unsigned int snp_tx_empty(struct uart_port *port)
+{
+ return 1;
+}
+
+/**
+ * snp_stop_tx - stop the transmitter - no-op for us
+ * @port: Port to operat eon - we ignore - no-op function
+ * @tty_stop: Set to 1 if called via uart_stop
+ *
+ */
+static void snp_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+}
+
+/**
+ * snp_release_port - Free i/o and resources for port - no-op for us
+ * @port: Port to operate on - we ignore - no-op function
+ *
+ */
+static void snp_release_port(struct uart_port *port)
+{
+}
+
+/**
+ * snp_enable_ms - Force modem status interrupts on - no-op for us
+ * @port: Port to operate on - we ignore - no-op function
+ *
+ */
+static void snp_enable_ms(struct uart_port *port)
+{
+}
+
+/**
+ * snp_shutdown - shut down the port - free irq and disable - no-op for us
+ * @port: Port to shut down - we ignore
+ *
+ */
+static void snp_shutdown(struct uart_port *port)
+{
+}
+
+/**
+ * snp_set_mctrl - set control lines (dtr, rts, etc) - no-op for our console
+ * @port: Port to operate on - we ignore
+ * @mctrl: Lines to set/unset - we ignore
+ *
+ */
+static void snp_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+/**
+ * snp_get_mctrl - get contorl line info, we just return a static value
+ * @port: port to operate on - we only have one port so we ignore this
+ *
+ */
+static unsigned int snp_get_mctrl(struct uart_port *port)
+{
+ return TIOCM_CAR | TIOCM_RNG | TIOCM_DSR | TIOCM_CTS;
+}
+
+/**
+ * snp_stop_rx - Stop the receiver - we ignor ethis
+ * @port: Port to operate on - we ignore
+ *
+ */
+static void snp_stop_rx(struct uart_port *port)
+{
+}
+
+/**
+ * snp_start_tx - Start transmitter
+ * @port: Port to operate on
+ * @tty_stop: Set to 1 if called via uart_start
+ *
+ */
+static void snp_start_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ if (sal_console_port.sc_ops->sal_wakeup_transmit)
+ sal_console_port.sc_ops->sal_wakeup_transmit(&sal_console_port,
+ TRANSMIT_BUFFERED);
+
+}
+
+/**
+ * snp_break_ctl - handle breaks - ignored by us
+ * @port: Port to operate on
+ * @break_state: Break state
+ *
+ */
+static void snp_break_ctl(struct uart_port *port, int break_state)
+{
+}
+
+/**
+ * snp_startup - Start up the serial port - always return 0 (We're always on)
+ * @port: Port to operate on
+ *
+ */
+static int snp_startup(struct uart_port *port)
+{
+ return 0;
+}
+
+/**
+ * snp_set_termios - set termios stuff - we ignore these
+ * @port: port to operate on
+ * @termios: New settings
+ * @termios: Old
+ *
+ */
+static void
+snp_set_termios(struct uart_port *port, struct termios *termios,
+ struct termios *old)
+{
+}
+
+/**
+ * snp_request_port - allocate resources for port - ignored by us
+ * @port: port to operate on
+ *
+ */
+static int snp_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+/**
+ * snp_config_port - allocate resources, set up - we ignore, we're always on
+ * @port: Port to operate on
+ * @flags: flags used for port setup
+ *
+ */
+static void snp_config_port(struct uart_port *port, int flags)
+{
+}
+
+/* Associate the uart functions above - given to serial core */
+
+static struct uart_ops sn_console_ops = {
+ .tx_empty = snp_tx_empty,
+ .set_mctrl = snp_set_mctrl,
+ .get_mctrl = snp_get_mctrl,
+ .stop_tx = snp_stop_tx,
+ .start_tx = snp_start_tx,
+ .stop_rx = snp_stop_rx,
+ .enable_ms = snp_enable_ms,
+ .break_ctl = snp_break_ctl,
+ .startup = snp_startup,
+ .shutdown = snp_shutdown,
+ .set_termios = snp_set_termios,
+ .pm = NULL,
+ .type = snp_type,
+ .release_port = snp_release_port,
+ .request_port = snp_request_port,
+ .config_port = snp_config_port,
+ .verify_port = NULL,
+};
+
+/* End of uart struct functions and defines */
+
+#ifdef DEBUG
+
+/**
+ * sn_debug_printf - close to hardware debugging printf
+ * @fmt: printf format
+ *
+ * This is as "close to the metal" as we can get, used when the driver
+ * itself may be broken.
+ *
+ */
+static int sn_debug_printf(const char *fmt, ...)
+{
+ static char printk_buf[1024];
+ int printed_len;
+ va_list args;
+
+ va_start(args, fmt);
+ printed_len = vsnprintf(printk_buf, sizeof(printk_buf), fmt, args);
+
+ if (!sal_console_port.sc_ops) {
+ sal_console_port.sc_ops = &poll_ops;
+ early_sn_setup();
+ }
+ sal_console_port.sc_ops->sal_puts_raw(printk_buf, printed_len);
+
+ va_end(args);
+ return printed_len;
+}
+#endif /* DEBUG */
+
+/*
+ * Interrupt handling routines.
+ */
+
+/**
+ * sn_receive_chars - Grab characters, pass them to tty layer
+ * @port: Port to operate on
+ * @regs: Saved registers (needed by uart_handle_sysrq_char)
+ * @flags: irq flags
+ *
+ * Note: If we're not registered with the serial core infrastructure yet,
+ * we don't try to send characters to it...
+ *
+ */
+static void
+sn_receive_chars(struct sn_cons_port *port, struct pt_regs *regs,
+ unsigned long flags)
+{
+ int ch;
+ struct tty_struct *tty;
+
+ if (!port) {
+ printk(KERN_ERR "sn_receive_chars - port NULL so can't receieve\n");
+ return;
+ }
+
+ if (!port->sc_ops) {
+ printk(KERN_ERR "sn_receive_chars - port->sc_ops NULL so can't receieve\n");
+ return;
+ }
+
+ if (port->sc_port.info) {
+ /* The serial_core stuffs are initilized, use them */
+ tty = port->sc_port.info->tty;
+ }
+ else {
+ /* Not registered yet - can't pass to tty layer. */
+ tty = NULL;
+ }
+
+ while (port->sc_ops->sal_input_pending()) {
+ ch = port->sc_ops->sal_getc();
+ if (ch < 0) {
+ printk(KERN_ERR "sn_console: An error occured while "
+ "obtaining data from the console (0x%0x)\n", ch);
+ break;
+ }
+#ifdef CONFIG_MAGIC_SYSRQ
+ if (sysrq_requested) {
+ unsigned long sysrq_timeout = sysrq_requested + HZ*5;
+
+ sysrq_requested = 0;
+ if (ch && time_before(jiffies, sysrq_timeout)) {
+ spin_unlock_irqrestore(&port->sc_port.lock, flags);
+ handle_sysrq(ch, regs, NULL);
+ spin_lock_irqsave(&port->sc_port.lock, flags);
+ /* ignore actual sysrq command char */
+ continue;
+ }
+ }
+ if (ch == *sysrq_serial_ptr) {
+ if (!(*++sysrq_serial_ptr)) {
+ sysrq_requested = jiffies;
+ sysrq_serial_ptr = sysrq_serial_str;
+ }
+ /*
+ * ignore the whole sysrq string except for the
+ * leading escape
+ */
+ if (ch != '\e')
+ continue;
+ }
+ else
+ sysrq_serial_ptr = sysrq_serial_str;
+#endif /* CONFIG_MAGIC_SYSRQ */
+
+ /* record the character to pass up to the tty layer */
+ if (tty) {
+ *tty->flip.char_buf_ptr = ch;
+ *tty->flip.flag_buf_ptr = TTY_NORMAL;
+ tty->flip.char_buf_ptr++;
+ tty->flip.count++;
+ if (tty->flip.count == TTY_FLIPBUF_SIZE)
+ break;
+ }
+ port->sc_port.icount.rx++;
+ }
+
+ if (tty)
+ tty_flip_buffer_push(tty);
+}
+
+/**
+ * sn_transmit_chars - grab characters from serial core, send off
+ * @port: Port to operate on
+ * @raw: Transmit raw or buffered
+ *
+ * Note: If we're early, before we're registered with serial core, the
+ * writes are going through sn_sal_console_write because that's how
+ * register_console has been set up. We currently could have asynch
+ * polls calling this function due to sn_sal_switch_to_asynch but we can
+ * ignore them until we register with the serial core stuffs.
+ *
+ */
+static void sn_transmit_chars(struct sn_cons_port *port, int raw)
+{
+ int xmit_count, tail, head, loops, ii;
+ int result;
+ char *start;
+ struct circ_buf *xmit;
+
+ if (!port)
+ return;
+
+ BUG_ON(!port->sc_is_asynch);
+
+ if (port->sc_port.info) {
+ /* We're initilized, using serial core infrastructure */
+ xmit = &port->sc_port.info->xmit;
+ } else {
+ /* Probably sn_sal_switch_to_asynch has been run but serial core isn't
+ * initilized yet. Just return. Writes are going through
+ * sn_sal_console_write (due to register_console) at this time.
+ */
+ return;
+ }
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&port->sc_port)) {
+ /* Nothing to do. */
+ return;
+ }
+
+ head = xmit->head;
+ tail = xmit->tail;
+ start = &xmit->buf[tail];
+
+ /* twice around gets the tail to the end of the buffer and
+ * then to the head, if needed */
+ loops = (head < tail) ? 2 : 1;
+
+ for (ii = 0; ii < loops; ii++) {
+ xmit_count = (head < tail) ?
+ (UART_XMIT_SIZE - tail) : (head - tail);
+
+ if (xmit_count > 0) {
+ if (raw == TRANSMIT_RAW)
+ result =
+ port->sc_ops->sal_puts_raw(start,
+ xmit_count);
+ else
+ result =
+ port->sc_ops->sal_puts(start, xmit_count);
+#ifdef DEBUG
+ if (!result)
+ DPRINTF("`");
+#endif
+ if (result > 0) {
+ xmit_count -= result;
+ port->sc_port.icount.tx += result;
+ tail += result;
+ tail &= UART_XMIT_SIZE - 1;
+ xmit->tail = tail;
+ start = &xmit->buf[tail];
+ }
+ }
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&port->sc_port);
+
+ if (uart_circ_empty(xmit))
+ snp_stop_tx(&port->sc_port, 0); /* no-op for us */
+}
+
+/**
+ * sn_sal_interrupt - Handle console interrupts
+ * @irq: irq #, useful for debug statements
+ * @dev_id: our pointer to our port (sn_cons_port which contains the uart port)
+ * @regs: Saved registers, used by sn_receive_chars for uart_handle_sysrq_char
+ *
+ */
+static irqreturn_t sn_sal_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct sn_cons_port *port = (struct sn_cons_port *)dev_id;
+ unsigned long flags;
+ int status = ia64_sn_console_intr_status();
+
+ if (!port)
+ return IRQ_NONE;
+
+ spin_lock_irqsave(&port->sc_port.lock, flags);
+ if (status & SAL_CONSOLE_INTR_RECV) {
+ sn_receive_chars(port, regs, flags);
+ }
+ if (status & SAL_CONSOLE_INTR_XMIT) {
+ sn_transmit_chars(port, TRANSMIT_BUFFERED);
+ }
+ spin_unlock_irqrestore(&port->sc_port.lock, flags);
+ return IRQ_HANDLED;
+}
+
+/**
+ * sn_sal_connect_interrupt - Request interrupt, handled by sn_sal_interrupt
+ * @port: Our sn_cons_port (which contains the uart port)
+ *
+ * returns the console irq if interrupt is successfully registered, else 0
+ *
+ */
+static int sn_sal_connect_interrupt(struct sn_cons_port *port)
+{
+ if (request_irq(SGI_UART_VECTOR, sn_sal_interrupt,
+ SA_INTERRUPT | SA_SHIRQ,
+ "SAL console driver", port) >= 0) {
+ return SGI_UART_VECTOR;
+ }
+
+ printk(KERN_INFO "sn_console: console proceeding in polled mode\n");
+ return 0;
+}
+
+/**
+ * sn_sal_timer_poll - this function handles polled console mode
+ * @data: A pointer to our sn_cons_port (which contains the uart port)
+ *
+ * data is the pointer that init_timer will store for us. This function is
+ * associated with init_timer to see if there is any console traffic.
+ * Obviously not used in interrupt mode
+ *
+ */
+static void sn_sal_timer_poll(unsigned long data)
+{
+ struct sn_cons_port *port = (struct sn_cons_port *)data;
+ unsigned long flags;
+
+ if (!port)
+ return;
+
+ if (!port->sc_port.irq) {
+ spin_lock_irqsave(&port->sc_port.lock, flags);
+ if (sn_process_input)
+ sn_receive_chars(port, NULL, flags);
+ sn_transmit_chars(port, TRANSMIT_RAW);
+ spin_unlock_irqrestore(&port->sc_port.lock, flags);
+ mod_timer(&port->sc_timer,
+ jiffies + port->sc_interrupt_timeout);
+ }
+}
+
+/*
+ * Boot-time initialization code
+ */
+
+/**
+ * sn_sal_switch_to_asynch - Switch to async mode (as opposed to synch)
+ * @port: Our sn_cons_port (which contains the uart port)
+ *
+ * So this is used by sn_sal_serial_console_init (early on, before we're
+ * registered with serial core). It's also used by sn_sal_module_init
+ * right after we've registered with serial core. The later only happens
+ * if we didn't already come through here via sn_sal_serial_console_init.
+ *
+ */
+static void __init sn_sal_switch_to_asynch(struct sn_cons_port *port)
+{
+ unsigned long flags;
+
+ if (!port)
+ return;
+
+ DPRINTF("sn_console: about to switch to asynchronous console\n");
+
+ /* without early_printk, we may be invoked late enough to race
+ * with other cpus doing console IO at this point, however
+ * console interrupts will never be enabled */
+ spin_lock_irqsave(&port->sc_port.lock, flags);
+
+ /* early_printk invocation may have done this for us */
+ if (!port->sc_ops)
+ port->sc_ops = &poll_ops;
+
+ /* we can't turn on the console interrupt (as request_irq
+ * calls kmalloc, which isn't set up yet), so we rely on a
+ * timer to poll for input and push data from the console
+ * buffer.
+ */
+ init_timer(&port->sc_timer);
+ port->sc_timer.function = sn_sal_timer_poll;
+ port->sc_timer.data = (unsigned long)port;
+
+ if (IS_RUNNING_ON_SIMULATOR())
+ port->sc_interrupt_timeout = 6;
+ else {
+ /* 960cps / 16 char FIFO = 60HZ
+ * HZ / (SN_SAL_FIFO_SPEED_CPS / SN_SAL_FIFO_DEPTH) */
+ port->sc_interrupt_timeout =
+ HZ * SN_SAL_UART_FIFO_DEPTH / SN_SAL_UART_FIFO_SPEED_CPS;
+ }
+ mod_timer(&port->sc_timer, jiffies + port->sc_interrupt_timeout);
+
+ port->sc_is_asynch = 1;
+ spin_unlock_irqrestore(&port->sc_port.lock, flags);
+}
+
+/**
+ * sn_sal_switch_to_interrupts - Switch to interrupt driven mode
+ * @port: Our sn_cons_port (which contains the uart port)
+ *
+ * In sn_sal_module_init, after we're registered with serial core and
+ * the port is added, this function is called to switch us to interrupt
+ * mode. We were previously in asynch/polling mode (using init_timer).
+ *
+ * We attempt to switch to interrupt mode here by calling
+ * sn_sal_connect_interrupt. If that works out, we enable receive interrupts.
+ */
+static void __init sn_sal_switch_to_interrupts(struct sn_cons_port *port)
+{
+ int irq;
+ unsigned long flags;
+
+ if (!port)
+ return;
+
+ DPRINTF("sn_console: switching to interrupt driven console\n");
+
+ spin_lock_irqsave(&port->sc_port.lock, flags);
+
+ irq = sn_sal_connect_interrupt(port);
+
+ if (irq) {
+ port->sc_port.irq = irq;
+ port->sc_ops = &intr_ops;
+
+ /* turn on receive interrupts */
+ ia64_sn_console_intr_enable(SAL_CONSOLE_INTR_RECV);
+ }
+ spin_unlock_irqrestore(&port->sc_port.lock, flags);
+}
+
+/*
+ * Kernel console definitions
+ */
+
+static void sn_sal_console_write(struct console *, const char *, unsigned);
+static int __init sn_sal_console_setup(struct console *, char *);
+extern struct uart_driver sal_console_uart;
+extern struct tty_driver *uart_console_device(struct console *, int *);
+
+static struct console sal_console = {
+ .name = DEVICE_NAME,
+ .write = sn_sal_console_write,
+ .device = uart_console_device,
+ .setup = sn_sal_console_setup,
+ .index = -1, /* unspecified */
+ .data = &sal_console_uart,
+};
+
+#define SAL_CONSOLE &sal_console
+
+struct uart_driver sal_console_uart = {
+ .owner = THIS_MODULE,
+ .driver_name = "sn_console",
+ .dev_name = DEVICE_NAME,
+ .major = 0, /* major/minor set at registration time per USE_DYNAMIC_MINOR */
+ .minor = 0,
+ .nr = 1, /* one port */
+ .cons = SAL_CONSOLE,
+};
+
+/**
+ * sn_sal_module_init - When the kernel loads us, get us rolling w/ serial core
+ *
+ * Before this is called, we've been printing kernel messages in a special
+ * early mode not making use of the serial core infrastructure. When our
+ * driver is loaded for real, we register the driver and port with serial
+ * core and try to enable interrupt driven mode.
+ *
+ */
+static int __init sn_sal_module_init(void)
+{
+ int retval;
+
+ if (!ia64_platform_is("sn2"))
+ return -ENODEV;
+
+ printk(KERN_INFO "sn_console: Console driver init\n");
+
+ if (USE_DYNAMIC_MINOR == 1) {
+ misc.minor = MISC_DYNAMIC_MINOR;
+ misc.name = DEVICE_NAME_DYNAMIC;
+ retval = misc_register(&misc);
+ if (retval != 0) {
+ printk
+ ("Failed to register console device using misc_register.\n");
+ return -ENODEV;
+ }
+ sal_console_uart.major = MISC_MAJOR;
+ sal_console_uart.minor = misc.minor;
+ } else {
+ sal_console_uart.major = DEVICE_MAJOR;
+ sal_console_uart.minor = DEVICE_MINOR;
+ }
+
+ /* We register the driver and the port before switching to interrupts
+ * or async above so the proper uart structures are populated */
+
+ if (uart_register_driver(&sal_console_uart) < 0) {
+ printk
+ ("ERROR sn_sal_module_init failed uart_register_driver, line %d\n",
+ __LINE__);
+ return -ENODEV;
+ }
+
+ spin_lock_init(&sal_console_port.sc_port.lock);
+
+ /* Setup the port struct with the minimum needed */
+ sal_console_port.sc_port.membase = (char *)1; /* just needs to be non-zero */
+ sal_console_port.sc_port.type = PORT_16550A;
+ sal_console_port.sc_port.fifosize = SN_SAL_MAX_CHARS;
+ sal_console_port.sc_port.ops = &sn_console_ops;
+ sal_console_port.sc_port.line = 0;
+
+ if (uart_add_one_port(&sal_console_uart, &sal_console_port.sc_port) < 0) {
+ /* error - not sure what I'd do - so I'll do nothing */
+ printk(KERN_ERR "%s: unable to add port\n", __FUNCTION__);
+ }
+
+ /* when this driver is compiled in, the console initialization
+ * will have already switched us into asynchronous operation
+ * before we get here through the module initcalls */
+ if (!sal_console_port.sc_is_asynch) {
+ sn_sal_switch_to_asynch(&sal_console_port);
+ }
+
+ /* at this point (module_init) we can try to turn on interrupts */
+ if (!IS_RUNNING_ON_SIMULATOR()) {
+ sn_sal_switch_to_interrupts(&sal_console_port);
+ }
+ sn_process_input = 1;
+ return 0;
+}
+
+/**
+ * sn_sal_module_exit - When we're unloaded, remove the driver/port
+ *
+ */
+static void __exit sn_sal_module_exit(void)
+{
+ del_timer_sync(&sal_console_port.sc_timer);
+ uart_remove_one_port(&sal_console_uart, &sal_console_port.sc_port);
+ uart_unregister_driver(&sal_console_uart);
+ misc_deregister(&misc);
+}
+
+module_init(sn_sal_module_init);
+module_exit(sn_sal_module_exit);
+
+/**
+ * puts_raw_fixed - sn_sal_console_write helper for adding \r's as required
+ * @puts_raw : puts function to do the writing
+ * @s: input string
+ * @count: length
+ *
+ * We need a \r ahead of every \n for direct writes through
+ * ia64_sn_console_putb (what sal_puts_raw below actually does).
+ *
+ */
+
+static void puts_raw_fixed(int (*puts_raw) (const char *s, int len),
+ const char *s, int count)
+{
+ const char *s1;
+
+ /* Output '\r' before each '\n' */
+ while ((s1 = memchr(s, '\n', count)) != NULL) {
+ puts_raw(s, s1 - s);
+ puts_raw("\r\n", 2);
+ count -= s1 + 1 - s;
+ s = s1 + 1;
+ }
+ puts_raw(s, count);
+}
+
+/**
+ * sn_sal_console_write - Print statements before serial core available
+ * @console: Console to operate on - we ignore since we have just one
+ * @s: String to send
+ * @count: length
+ *
+ * This is referenced in the console struct. It is used for early
+ * console printing before we register with serial core and for things
+ * such as kdb. The console_lock must be held when we get here.
+ *
+ * This function has some code for trying to print output even if the lock
+ * is held. We try to cover the case where a lock holder could have died.
+ * We don't use this special case code if we're not registered with serial
+ * core yet. After we're registered with serial core, the only time this
+ * function would be used is for high level kernel output like magic sys req,
+ * kdb, and printk's.
+ */
+static void
+sn_sal_console_write(struct console *co, const char *s, unsigned count)
+{
+ unsigned long flags = 0;
+ struct sn_cons_port *port = &sal_console_port;
+#if defined(CONFIG_SMP) || defined(CONFIG_PREEMPT)
+ static int stole_lock = 0;
+#endif
+
+ BUG_ON(!port->sc_is_asynch);
+
+ /* We can't look at the xmit buffer if we're not registered with serial core
+ * yet. So only do the fancy recovery after registering
+ */
+ if (port->sc_port.info) {
+
+ /* somebody really wants this output, might be an
+ * oops, kdb, panic, etc. make sure they get it. */
+#if defined(CONFIG_SMP) || defined(CONFIG_PREEMPT)
+ if (spin_is_locked(&port->sc_port.lock)) {
+ int lhead = port->sc_port.info->xmit.head;
+ int ltail = port->sc_port.info->xmit.tail;
+ int counter, got_lock = 0;
+
+ /*
+ * We attempt to determine if someone has died with the
+ * lock. We wait ~20 secs after the head and tail ptrs
+ * stop moving and assume the lock holder is not functional
+ * and plow ahead. If the lock is freed within the time out
+ * period we re-get the lock and go ahead normally. We also
+ * remember if we have plowed ahead so that we don't have
+ * to wait out the time out period again - the asumption
+ * is that we will time out again.
+ */
+
+ for (counter = 0; counter < 150; mdelay(125), counter++) {
+ if (!spin_is_locked(&port->sc_port.lock)
+ || stole_lock) {
+ if (!stole_lock) {
+ spin_lock_irqsave(&port->
+ sc_port.lock,
+ flags);
+ got_lock = 1;
+ }
+ break;
+ } else {
+ /* still locked */
+ if ((lhead !=
+ port->sc_port.info->xmit.head)
+ || (ltail !=
+ port->sc_port.info->xmit.
+ tail)) {
+ lhead =
+ port->sc_port.info->xmit.
+ head;
+ ltail =
+ port->sc_port.info->xmit.
+ tail;
+ counter = 0;
+ }
+ }
+ }
+ /* flush anything in the serial core xmit buffer, raw */
+ sn_transmit_chars(port, 1);
+ if (got_lock) {
+ spin_unlock_irqrestore(&port->sc_port.lock,
+ flags);
+ stole_lock = 0;
+ } else {
+ /* fell thru */
+ stole_lock = 1;
+ }
+ puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count);
+ } else {
+ stole_lock = 0;
+#endif
+ spin_lock_irqsave(&port->sc_port.lock, flags);
+ sn_transmit_chars(port, 1);
+ spin_unlock_irqrestore(&port->sc_port.lock, flags);
+
+ puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count);
+#if defined(CONFIG_SMP) || defined(CONFIG_PREEMPT)
+ }
+#endif
+ }
+ else {
+ /* Not yet registered with serial core - simple case */
+ puts_raw_fixed(port->sc_ops->sal_puts_raw, s, count);
+ }
+}
+
+
+/**
+ * sn_sal_console_setup - Set up console for early printing
+ * @co: Console to work with
+ * @options: Options to set
+ *
+ * Altix console doesn't do anything with baud rates, etc, anyway.
+ *
+ * This isn't required since not providing the setup function in the
+ * console struct is ok. However, other patches like KDB plop something
+ * here so providing it is easier.
+ *
+ */
+static int __init sn_sal_console_setup(struct console *co, char *options)
+{
+ return 0;
+}
+
+/**
+ * sn_sal_console_write_early - simple early output routine
+ * @co - console struct
+ * @s - string to print
+ * @count - count
+ *
+ * Simple function to provide early output, before even
+ * sn_sal_serial_console_init is called. Referenced in the
+ * console struct registerd in sn_serial_console_early_setup.
+ *
+ */
+static void __init
+sn_sal_console_write_early(struct console *co, const char *s, unsigned count)
+{
+ puts_raw_fixed(sal_console_port.sc_ops->sal_puts_raw, s, count);
+}
+
+/* Used for very early console printing - again, before
+ * sn_sal_serial_console_init is run */
+static struct console sal_console_early __initdata = {
+ .name = "sn_sal",
+ .write = sn_sal_console_write_early,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+
+/**
+ * sn_serial_console_early_setup - Sets up early console output support
+ *
+ * Register a console early on... This is for output before even
+ * sn_sal_serial_cosnole_init is called. This function is called from
+ * setup.c. This allows us to do really early polled writes. When
+ * sn_sal_serial_console_init is called, this console is unregistered
+ * and a new one registered.
+ */
+int __init sn_serial_console_early_setup(void)
+{
+ if (!ia64_platform_is("sn2"))
+ return -1;
+
+ sal_console_port.sc_ops = &poll_ops;
+ early_sn_setup(); /* Find SAL entry points */
+ register_console(&sal_console_early);
+
+ return 0;
+}
+
+/**
+ * sn_sal_serial_console_init - Early console output - set up for register
+ *
+ * This function is called when regular console init happens. Because we
+ * support even earlier console output with sn_serial_console_early_setup
+ * (called from setup.c directly), this function unregisters the really
+ * early console.
+ *
+ * Note: Even if setup.c doesn't register sal_console_early, unregistering
+ * it here doesn't hurt anything.
+ *
+ */
+static int __init sn_sal_serial_console_init(void)
+{
+ if (ia64_platform_is("sn2")) {
+ sn_sal_switch_to_asynch(&sal_console_port);
+ DPRINTF("sn_sal_serial_console_init : register console\n");
+ register_console(&sal_console);
+ unregister_console(&sal_console_early);
+ }
+ return 0;
+}
+
+console_initcall(sn_sal_serial_console_init);
diff --git a/drivers/serial/suncore.c b/drivers/serial/suncore.c
new file mode 100644
index 00000000000..5fc4a62173d
--- /dev/null
+++ b/drivers/serial/suncore.c
@@ -0,0 +1,218 @@
+/* suncore.c
+ *
+ * Common SUN serial routines. Based entirely
+ * upon drivers/sbus/char/sunserial.c which is:
+ *
+ * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
+ *
+ * Adaptation to new UART layer is:
+ *
+ * Copyright (C) 2002 David S. Miller (davem@redhat.com)
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/init.h>
+
+#include <asm/oplib.h>
+
+#include "suncore.h"
+
+int sunserial_current_minor = 64;
+
+EXPORT_SYMBOL(sunserial_current_minor);
+
+void
+sunserial_console_termios(struct console *con)
+{
+ char mode[16], buf[16], *s;
+ char *mode_prop = "ttyX-mode";
+ char *cd_prop = "ttyX-ignore-cd";
+ char *dtr_prop = "ttyX-rts-dtr-off";
+ int baud, bits, stop, cflag;
+ char parity;
+ int carrier = 0;
+ int rtsdtr = 1;
+ int topnd, nd;
+
+ if (!serial_console)
+ return;
+
+ if (serial_console == 1) {
+ mode_prop[3] = 'a';
+ cd_prop[3] = 'a';
+ dtr_prop[3] = 'a';
+ } else {
+ mode_prop[3] = 'b';
+ cd_prop[3] = 'b';
+ dtr_prop[3] = 'b';
+ }
+
+ topnd = prom_getchild(prom_root_node);
+ nd = prom_searchsiblings(topnd, "options");
+ if (!nd) {
+ strcpy(mode, "9600,8,n,1,-");
+ goto no_options;
+ }
+
+ if (!prom_node_has_property(nd, mode_prop)) {
+ strcpy(mode, "9600,8,n,1,-");
+ goto no_options;
+ }
+
+ memset(mode, 0, sizeof(mode));
+ prom_getstring(nd, mode_prop, mode, sizeof(mode));
+
+ if (prom_node_has_property(nd, cd_prop)) {
+ memset(buf, 0, sizeof(buf));
+ prom_getstring(nd, cd_prop, buf, sizeof(buf));
+ if (!strcmp(buf, "false"))
+ carrier = 1;
+
+ /* XXX: this is unused below. */
+ }
+
+ if (prom_node_has_property(nd, dtr_prop)) {
+ memset(buf, 0, sizeof(buf));
+ prom_getstring(nd, dtr_prop, buf, sizeof(buf));
+ if (!strcmp(buf, "false"))
+ rtsdtr = 0;
+
+ /* XXX: this is unused below. */
+ }
+
+no_options:
+ cflag = CREAD | HUPCL | CLOCAL;
+
+ s = mode;
+ baud = simple_strtoul(s, NULL, 0);
+ s = strchr(s, ',');
+ bits = simple_strtoul(++s, NULL, 0);
+ s = strchr(s, ',');
+ parity = *(++s);
+ s = strchr(s, ',');
+ stop = simple_strtoul(++s, NULL, 0);
+ s = strchr(s, ',');
+ /* XXX handshake is not handled here. */
+
+ switch (baud) {
+ case 150: cflag |= B150; break;
+ case 300: cflag |= B300; break;
+ case 600: cflag |= B600; break;
+ case 1200: cflag |= B1200; break;
+ case 2400: cflag |= B2400; break;
+ case 4800: cflag |= B4800; break;
+ case 9600: cflag |= B9600; break;
+ case 19200: cflag |= B19200; break;
+ case 38400: cflag |= B38400; break;
+ default: baud = 9600; cflag |= B9600; break;
+ }
+
+ switch (bits) {
+ case 5: cflag |= CS5; break;
+ case 6: cflag |= CS6; break;
+ case 7: cflag |= CS7; break;
+ case 8: cflag |= CS8; break;
+ default: cflag |= CS8; break;
+ }
+
+ switch (parity) {
+ case 'o': cflag |= (PARENB | PARODD); break;
+ case 'e': cflag |= PARENB; break;
+ case 'n': default: break;
+ }
+
+ switch (stop) {
+ case 2: cflag |= CSTOPB; break;
+ case 1: default: break;
+ }
+
+ con->cflag = cflag;
+}
+
+EXPORT_SYMBOL(sunserial_console_termios);
+
+/* Sun serial MOUSE auto baud rate detection. */
+static struct mouse_baud_cflag {
+ int baud;
+ unsigned int cflag;
+} mouse_baud_table[] = {
+ { 1200, B1200 },
+ { 2400, B2400 },
+ { 4800, B4800 },
+ { 9600, B9600 },
+ { -1, ~0 },
+ { -1, ~0 },
+};
+
+unsigned int suncore_mouse_baud_cflag_next(unsigned int cflag, int *new_baud)
+{
+ int i;
+
+ for (i = 0; mouse_baud_table[i].baud != -1; i++)
+ if (mouse_baud_table[i].cflag == (cflag & CBAUD))
+ break;
+
+ i += 1;
+ if (mouse_baud_table[i].baud == -1)
+ i = 0;
+
+ *new_baud = mouse_baud_table[i].baud;
+ return mouse_baud_table[i].cflag;
+}
+
+EXPORT_SYMBOL(suncore_mouse_baud_cflag_next);
+
+/* Basically, when the baud rate is wrong the mouse spits out
+ * breaks to us.
+ */
+int suncore_mouse_baud_detection(unsigned char ch, int is_break)
+{
+ static int mouse_got_break = 0;
+ static int ctr = 0;
+
+ if (is_break) {
+ /* Let a few normal bytes go by before we jump the gun
+ * and say we need to try another baud rate.
+ */
+ if (mouse_got_break && ctr < 8)
+ return 1;
+
+ /* Ok, we need to try another baud. */
+ ctr = 0;
+ mouse_got_break = 1;
+ return 2;
+ }
+ if (mouse_got_break) {
+ ctr++;
+ if (ch == 0x87) {
+ /* Correct baud rate determined. */
+ mouse_got_break = 0;
+ }
+ return 1;
+ }
+ return 0;
+}
+
+EXPORT_SYMBOL(suncore_mouse_baud_detection);
+
+static int __init suncore_init(void)
+{
+ return 0;
+}
+
+static void __exit suncore_exit(void)
+{
+}
+
+module_init(suncore_init);
+module_exit(suncore_exit);
+
+MODULE_AUTHOR("Eddie C. Dost, David S. Miller");
+MODULE_DESCRIPTION("Sun serial common layer");
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/suncore.h b/drivers/serial/suncore.h
new file mode 100644
index 00000000000..513916a8ce3
--- /dev/null
+++ b/drivers/serial/suncore.h
@@ -0,0 +1,29 @@
+/* suncore.h
+ *
+ * Generic SUN serial/kbd/ms layer. Based entirely
+ * upon drivers/sbus/char/sunserial.h which is:
+ *
+ * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
+ *
+ * Port to new UART layer is:
+ *
+ * Copyright (C) 2002 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef _SERIAL_SUN_H
+#define _SERIAL_SUN_H
+
+/* Serial keyboard defines for L1-A processing... */
+#define SUNKBD_RESET 0xff
+#define SUNKBD_L1 0x01
+#define SUNKBD_UP 0x80
+#define SUNKBD_A 0x4d
+
+extern unsigned int suncore_mouse_baud_cflag_next(unsigned int, int *);
+extern int suncore_mouse_baud_detection(unsigned char, int);
+
+extern int sunserial_current_minor;
+
+extern void sunserial_console_termios(struct console *);
+
+#endif /* !(_SERIAL_SUN_H) */
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
new file mode 100644
index 00000000000..8caaf2e5e47
--- /dev/null
+++ b/drivers/serial/sunsab.c
@@ -0,0 +1,1171 @@
+/* sunsab.c: ASYNC Driver for the SIEMENS SAB82532 DUSCC.
+ *
+ * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
+ * Copyright (C) 2002 David S. Miller (davem@redhat.com)
+ *
+ * Rewrote buffer handling to use CIRC(Circular Buffer) macros.
+ * Maxim Krasnyanskiy <maxk@qualcomm.com>
+ *
+ * Fixed to use tty_get_baud_rate, and to allow for arbitrary baud
+ * rates to be programmed into the UART. Also eliminated a lot of
+ * duplicated code in the console setup.
+ * Theodore Ts'o <tytso@mit.edu>, 2001-Oct-12
+ *
+ * Ported to new 2.5.x UART layer.
+ * David S. Miller <davem@redhat.com>
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/circ_buf.h>
+#include <linux/serial.h>
+#include <linux/sysrq.h>
+#include <linux/console.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/oplib.h>
+#include <asm/ebus.h>
+
+#if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/serial_core.h>
+
+#include "suncore.h"
+#include "sunsab.h"
+
+struct uart_sunsab_port {
+ struct uart_port port; /* Generic UART port */
+ union sab82532_async_regs __iomem *regs; /* Chip registers */
+ unsigned long irqflags; /* IRQ state flags */
+ int dsr; /* Current DSR state */
+ unsigned int cec_timeout; /* Chip poll timeout... */
+ unsigned int tec_timeout; /* likewise */
+ unsigned char interrupt_mask0;/* ISR0 masking */
+ unsigned char interrupt_mask1;/* ISR1 masking */
+ unsigned char pvr_dtr_bit; /* Which PVR bit is DTR */
+ unsigned char pvr_dsr_bit; /* Which PVR bit is DSR */
+ int type; /* SAB82532 version */
+};
+
+/*
+ * This assumes you have a 29.4912 MHz clock for your UART.
+ */
+#define SAB_BASE_BAUD ( 29491200 / 16 )
+
+static char *sab82532_version[16] = {
+ "V1.0", "V2.0", "V3.2", "V(0x03)",
+ "V(0x04)", "V(0x05)", "V(0x06)", "V(0x07)",
+ "V(0x08)", "V(0x09)", "V(0x0a)", "V(0x0b)",
+ "V(0x0c)", "V(0x0d)", "V(0x0e)", "V(0x0f)"
+};
+
+#define SAB82532_MAX_TEC_TIMEOUT 200000 /* 1 character time (at 50 baud) */
+#define SAB82532_MAX_CEC_TIMEOUT 50000 /* 2.5 TX CLKs (at 50 baud) */
+
+#define SAB82532_RECV_FIFO_SIZE 32 /* Standard async fifo sizes */
+#define SAB82532_XMIT_FIFO_SIZE 32
+
+static __inline__ void sunsab_tec_wait(struct uart_sunsab_port *up)
+{
+ int timeout = up->tec_timeout;
+
+ while ((readb(&up->regs->r.star) & SAB82532_STAR_TEC) && --timeout)
+ udelay(1);
+}
+
+static __inline__ void sunsab_cec_wait(struct uart_sunsab_port *up)
+{
+ int timeout = up->cec_timeout;
+
+ while ((readb(&up->regs->r.star) & SAB82532_STAR_CEC) && --timeout)
+ udelay(1);
+}
+
+static struct tty_struct *
+receive_chars(struct uart_sunsab_port *up,
+ union sab82532_irq_status *stat,
+ struct pt_regs *regs)
+{
+ struct tty_struct *tty = NULL;
+ unsigned char buf[32];
+ int saw_console_brk = 0;
+ int free_fifo = 0;
+ int count = 0;
+ int i;
+
+ if (up->port.info != NULL) /* Unopened serial console */
+ tty = up->port.info->tty;
+
+ /* Read number of BYTES (Character + Status) available. */
+ if (stat->sreg.isr0 & SAB82532_ISR0_RPF) {
+ count = SAB82532_RECV_FIFO_SIZE;
+ free_fifo++;
+ }
+
+ if (stat->sreg.isr0 & SAB82532_ISR0_TCD) {
+ count = readb(&up->regs->r.rbcl) & (SAB82532_RECV_FIFO_SIZE - 1);
+ free_fifo++;
+ }
+
+ /* Issue a FIFO read command in case we where idle. */
+ if (stat->sreg.isr0 & SAB82532_ISR0_TIME) {
+ sunsab_cec_wait(up);
+ writeb(SAB82532_CMDR_RFRD, &up->regs->w.cmdr);
+ return tty;
+ }
+
+ if (stat->sreg.isr0 & SAB82532_ISR0_RFO)
+ free_fifo++;
+
+ /* Read the FIFO. */
+ for (i = 0; i < count; i++)
+ buf[i] = readb(&up->regs->r.rfifo[i]);
+
+ /* Issue Receive Message Complete command. */
+ if (free_fifo) {
+ sunsab_cec_wait(up);
+ writeb(SAB82532_CMDR_RMC, &up->regs->w.cmdr);
+ }
+
+ /* Count may be zero for BRK, so we check for it here */
+ if ((stat->sreg.isr1 & SAB82532_ISR1_BRK) &&
+ (up->port.line == up->port.cons->index))
+ saw_console_brk = 1;
+
+ for (i = 0; i < count; i++) {
+ unsigned char ch = buf[i];
+
+ if (tty == NULL) {
+ uart_handle_sysrq_char(&up->port, ch, regs);
+ continue;
+ }
+
+ if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
+ tty->flip.work.func((void *)tty);
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+ return tty; // if TTY_DONT_FLIP is set
+ }
+
+ *tty->flip.char_buf_ptr = ch;
+ *tty->flip.flag_buf_ptr = TTY_NORMAL;
+ up->port.icount.rx++;
+
+ if (unlikely(stat->sreg.isr0 & (SAB82532_ISR0_PERR |
+ SAB82532_ISR0_FERR |
+ SAB82532_ISR0_RFO)) ||
+ unlikely(stat->sreg.isr1 & SAB82532_ISR1_BRK)) {
+ /*
+ * For statistics only
+ */
+ if (stat->sreg.isr1 & SAB82532_ISR1_BRK) {
+ stat->sreg.isr0 &= ~(SAB82532_ISR0_PERR |
+ SAB82532_ISR0_FERR);
+ up->port.icount.brk++;
+ /*
+ * We do the SysRQ and SAK checking
+ * here because otherwise the break
+ * may get masked by ignore_status_mask
+ * or read_status_mask.
+ */
+ if (uart_handle_break(&up->port))
+ continue;
+ } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR)
+ up->port.icount.parity++;
+ else if (stat->sreg.isr0 & SAB82532_ISR0_FERR)
+ up->port.icount.frame++;
+ if (stat->sreg.isr0 & SAB82532_ISR0_RFO)
+ up->port.icount.overrun++;
+
+ /*
+ * Mask off conditions which should be ingored.
+ */
+ stat->sreg.isr0 &= (up->port.read_status_mask & 0xff);
+ stat->sreg.isr1 &= ((up->port.read_status_mask >> 8) & 0xff);
+
+ if (stat->sreg.isr1 & SAB82532_ISR1_BRK) {
+ *tty->flip.flag_buf_ptr = TTY_BREAK;
+ } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR)
+ *tty->flip.flag_buf_ptr = TTY_PARITY;
+ else if (stat->sreg.isr0 & SAB82532_ISR0_FERR)
+ *tty->flip.flag_buf_ptr = TTY_FRAME;
+ }
+
+ if (uart_handle_sysrq_char(&up->port, ch, regs))
+ continue;
+
+ if ((stat->sreg.isr0 & (up->port.ignore_status_mask & 0xff)) == 0 &&
+ (stat->sreg.isr1 & ((up->port.ignore_status_mask >> 8) & 0xff)) == 0){
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ tty->flip.count++;
+ }
+ if ((stat->sreg.isr0 & SAB82532_ISR0_RFO) &&
+ tty->flip.count < TTY_FLIPBUF_SIZE) {
+ /*
+ * Overrun is special, since it's reported
+ * immediately, and doesn't affect the current
+ * character.
+ */
+ *tty->flip.flag_buf_ptr = TTY_OVERRUN;
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ tty->flip.count++;
+ }
+ }
+
+ if (saw_console_brk)
+ sun_do_break();
+
+ return tty;
+}
+
+static void sunsab_stop_tx(struct uart_port *, unsigned int);
+
+static void transmit_chars(struct uart_sunsab_port *up,
+ union sab82532_irq_status *stat)
+{
+ struct circ_buf *xmit = &up->port.info->xmit;
+ int i;
+
+ if (stat->sreg.isr1 & SAB82532_ISR1_ALLS) {
+ up->interrupt_mask1 |= SAB82532_IMR1_ALLS;
+ writeb(up->interrupt_mask1, &up->regs->w.imr1);
+ set_bit(SAB82532_ALLS, &up->irqflags);
+ }
+
+#if 0 /* bde@nwlink.com says this check causes problems */
+ if (!(stat->sreg.isr1 & SAB82532_ISR1_XPR))
+ return;
+#endif
+
+ if (!(readb(&up->regs->r.star) & SAB82532_STAR_XFW))
+ return;
+
+ set_bit(SAB82532_XPR, &up->irqflags);
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
+ up->interrupt_mask1 |= SAB82532_IMR1_XPR;
+ writeb(up->interrupt_mask1, &up->regs->w.imr1);
+ uart_write_wakeup(&up->port);
+ return;
+ }
+
+ up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR);
+ writeb(up->interrupt_mask1, &up->regs->w.imr1);
+ clear_bit(SAB82532_ALLS, &up->irqflags);
+
+ /* Stuff 32 bytes into Transmit FIFO. */
+ clear_bit(SAB82532_XPR, &up->irqflags);
+ for (i = 0; i < up->port.fifosize; i++) {
+ writeb(xmit->buf[xmit->tail],
+ &up->regs->w.xfifo[i]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ up->port.icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ }
+
+ /* Issue a Transmit Frame command. */
+ sunsab_cec_wait(up);
+ writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+
+ if (uart_circ_empty(xmit))
+ sunsab_stop_tx(&up->port, 0);
+}
+
+static void check_status(struct uart_sunsab_port *up,
+ union sab82532_irq_status *stat)
+{
+ if (stat->sreg.isr0 & SAB82532_ISR0_CDSC)
+ uart_handle_dcd_change(&up->port,
+ !(readb(&up->regs->r.vstr) & SAB82532_VSTR_CD));
+
+ if (stat->sreg.isr1 & SAB82532_ISR1_CSC)
+ uart_handle_cts_change(&up->port,
+ (readb(&up->regs->r.star) & SAB82532_STAR_CTS));
+
+ if ((readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ^ up->dsr) {
+ up->dsr = (readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ? 0 : 1;
+ up->port.icount.dsr++;
+ }
+
+ wake_up_interruptible(&up->port.info->delta_msr_wait);
+}
+
+static irqreturn_t sunsab_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct uart_sunsab_port *up = dev_id;
+ struct tty_struct *tty;
+ union sab82532_irq_status status;
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ status.stat = 0;
+ if (readb(&up->regs->r.gis) & SAB82532_GIS_ISA0)
+ status.sreg.isr0 = readb(&up->regs->r.isr0);
+ if (readb(&up->regs->r.gis) & SAB82532_GIS_ISA1)
+ status.sreg.isr1 = readb(&up->regs->r.isr1);
+
+ tty = NULL;
+ if (status.stat) {
+ if ((status.sreg.isr0 & (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME |
+ SAB82532_ISR0_RFO | SAB82532_ISR0_RPF)) ||
+ (status.sreg.isr1 & SAB82532_ISR1_BRK))
+ tty = receive_chars(up, &status, regs);
+ if ((status.sreg.isr0 & SAB82532_ISR0_CDSC) ||
+ (status.sreg.isr1 & SAB82532_ISR1_CSC))
+ check_status(up, &status);
+ if (status.sreg.isr1 & (SAB82532_ISR1_ALLS | SAB82532_ISR1_XPR))
+ transmit_chars(up, &status);
+ }
+
+ spin_unlock(&up->port.lock);
+
+ if (tty)
+ tty_flip_buffer_push(tty);
+
+ up++;
+
+ spin_lock(&up->port.lock);
+
+ status.stat = 0;
+ if (readb(&up->regs->r.gis) & SAB82532_GIS_ISB0)
+ status.sreg.isr0 = readb(&up->regs->r.isr0);
+ if (readb(&up->regs->r.gis) & SAB82532_GIS_ISB1)
+ status.sreg.isr1 = readb(&up->regs->r.isr1);
+
+ tty = NULL;
+ if (status.stat) {
+ if ((status.sreg.isr0 & (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME |
+ SAB82532_ISR0_RFO | SAB82532_ISR0_RPF)) ||
+ (status.sreg.isr1 & SAB82532_ISR1_BRK))
+
+ tty = receive_chars(up, &status, regs);
+ if ((status.sreg.isr0 & SAB82532_ISR0_CDSC) ||
+ (status.sreg.isr1 & (SAB82532_ISR1_BRK | SAB82532_ISR1_CSC)))
+ check_status(up, &status);
+ if (status.sreg.isr1 & (SAB82532_ISR1_ALLS | SAB82532_ISR1_XPR))
+ transmit_chars(up, &status);
+ }
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ if (tty)
+ tty_flip_buffer_push(tty);
+
+ return IRQ_HANDLED;
+}
+
+/* port->lock is not held. */
+static unsigned int sunsab_tx_empty(struct uart_port *port)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+ int ret;
+
+ /* Do not need a lock for a state test like this. */
+ if (test_bit(SAB82532_ALLS, &up->irqflags))
+ ret = TIOCSER_TEMT;
+ else
+ ret = 0;
+
+ return ret;
+}
+
+/* port->lock held by caller. */
+static void sunsab_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+
+ if (mctrl & TIOCM_RTS) {
+ writeb(readb(&up->regs->rw.mode) & ~SAB82532_MODE_FRTS,
+ &up->regs->rw.mode);
+ writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_RTS,
+ &up->regs->rw.mode);
+ } else {
+ writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_FRTS,
+ &up->regs->rw.mode);
+ writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_RTS,
+ &up->regs->rw.mode);
+ }
+ if (mctrl & TIOCM_DTR) {
+ writeb(readb(&up->regs->rw.pvr) & ~(up->pvr_dtr_bit), &up->regs->rw.pvr);
+ } else {
+ writeb(readb(&up->regs->rw.pvr) | up->pvr_dtr_bit, &up->regs->rw.pvr);
+ }
+}
+
+/* port->lock is not held. */
+static unsigned int sunsab_get_mctrl(struct uart_port *port)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+ unsigned long flags;
+ unsigned char val;
+ unsigned int result;
+
+ result = 0;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ val = readb(&up->regs->r.pvr);
+ result |= (val & up->pvr_dsr_bit) ? 0 : TIOCM_DSR;
+
+ val = readb(&up->regs->r.vstr);
+ result |= (val & SAB82532_VSTR_CD) ? 0 : TIOCM_CAR;
+
+ val = readb(&up->regs->r.star);
+ result |= (val & SAB82532_STAR_CTS) ? TIOCM_CTS : 0;
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return result;
+}
+
+/* port->lock held by caller. */
+static void sunsab_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+
+ up->interrupt_mask1 |= SAB82532_IMR1_XPR;
+ writeb(up->interrupt_mask1, &up->regs->w.imr1);
+}
+
+/* port->lock held by caller. */
+static void sunsab_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+ struct circ_buf *xmit = &up->port.info->xmit;
+ int i;
+
+ up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR);
+ writeb(up->interrupt_mask1, &up->regs->w.imr1);
+
+ if (!test_bit(SAB82532_XPR, &up->irqflags))
+ return;
+
+ clear_bit(SAB82532_ALLS, &up->irqflags);
+ clear_bit(SAB82532_XPR, &up->irqflags);
+
+ for (i = 0; i < up->port.fifosize; i++) {
+ writeb(xmit->buf[xmit->tail],
+ &up->regs->w.xfifo[i]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ up->port.icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ }
+
+ /* Issue a Transmit Frame command. */
+ sunsab_cec_wait(up);
+ writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr);
+}
+
+/* port->lock is not held. */
+static void sunsab_send_xchar(struct uart_port *port, char ch)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ sunsab_tec_wait(up);
+ writeb(ch, &up->regs->w.tic);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+/* port->lock held by caller. */
+static void sunsab_stop_rx(struct uart_port *port)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+
+ up->interrupt_mask0 |= SAB82532_ISR0_TCD;
+ writeb(up->interrupt_mask1, &up->regs->w.imr0);
+}
+
+/* port->lock held by caller. */
+static void sunsab_enable_ms(struct uart_port *port)
+{
+ /* For now we always receive these interrupts. */
+}
+
+/* port->lock is not held. */
+static void sunsab_break_ctl(struct uart_port *port, int break_state)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+ unsigned long flags;
+ unsigned char val;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ val = readb(&up->regs->rw.dafo);
+ if (break_state)
+ val |= SAB82532_DAFO_XBRK;
+ else
+ val &= ~SAB82532_DAFO_XBRK;
+ writeb(val, &up->regs->rw.dafo);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+/* port->lock is not held. */
+static int sunsab_startup(struct uart_port *port)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+ unsigned long flags;
+ unsigned char tmp;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ /*
+ * Wait for any commands or immediate characters
+ */
+ sunsab_cec_wait(up);
+ sunsab_tec_wait(up);
+
+ /*
+ * Clear the FIFO buffers.
+ */
+ writeb(SAB82532_CMDR_RRES, &up->regs->w.cmdr);
+ sunsab_cec_wait(up);
+ writeb(SAB82532_CMDR_XRES, &up->regs->w.cmdr);
+
+ /*
+ * Clear the interrupt registers.
+ */
+ (void) readb(&up->regs->r.isr0);
+ (void) readb(&up->regs->r.isr1);
+
+ /*
+ * Now, initialize the UART
+ */
+ writeb(0, &up->regs->w.ccr0); /* power-down */
+ writeb(SAB82532_CCR0_MCE | SAB82532_CCR0_SC_NRZ |
+ SAB82532_CCR0_SM_ASYNC, &up->regs->w.ccr0);
+ writeb(SAB82532_CCR1_ODS | SAB82532_CCR1_BCR | 7, &up->regs->w.ccr1);
+ writeb(SAB82532_CCR2_BDF | SAB82532_CCR2_SSEL |
+ SAB82532_CCR2_TOE, &up->regs->w.ccr2);
+ writeb(0, &up->regs->w.ccr3);
+ writeb(SAB82532_CCR4_MCK4 | SAB82532_CCR4_EBRG, &up->regs->w.ccr4);
+ writeb(SAB82532_MODE_RTS | SAB82532_MODE_FCTS |
+ SAB82532_MODE_RAC, &up->regs->w.mode);
+ writeb(SAB82532_RFC_DPS|SAB82532_RFC_RFTH_32, &up->regs->w.rfc);
+
+ tmp = readb(&up->regs->rw.ccr0);
+ tmp |= SAB82532_CCR0_PU; /* power-up */
+ writeb(tmp, &up->regs->rw.ccr0);
+
+ /*
+ * Finally, enable interrupts
+ */
+ up->interrupt_mask0 = (SAB82532_IMR0_PERR | SAB82532_IMR0_FERR |
+ SAB82532_IMR0_PLLA);
+ writeb(up->interrupt_mask0, &up->regs->w.imr0);
+ up->interrupt_mask1 = (SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS |
+ SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN |
+ SAB82532_IMR1_CSC | SAB82532_IMR1_XON |
+ SAB82532_IMR1_XPR);
+ writeb(up->interrupt_mask1, &up->regs->w.imr1);
+ set_bit(SAB82532_ALLS, &up->irqflags);
+ set_bit(SAB82532_XPR, &up->irqflags);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return 0;
+}
+
+/* port->lock is not held. */
+static void sunsab_shutdown(struct uart_port *port)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+ unsigned long flags;
+ unsigned char tmp;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ /* Disable Interrupts */
+ up->interrupt_mask0 = 0xff;
+ writeb(up->interrupt_mask0, &up->regs->w.imr0);
+ up->interrupt_mask1 = 0xff;
+ writeb(up->interrupt_mask1, &up->regs->w.imr1);
+
+ /* Disable break condition */
+ tmp = readb(&up->regs->rw.dafo);
+ tmp &= ~SAB82532_DAFO_XBRK;
+ writeb(tmp, &up->regs->rw.dafo);
+
+ /* Disable Receiver */
+ tmp = readb(&up->regs->rw.mode);
+ tmp &= ~SAB82532_MODE_RAC;
+ writeb(tmp, &up->regs->rw.mode);
+
+ /*
+ * XXX FIXME
+ *
+ * If the chip is powered down here the system hangs/crashes during
+ * reboot or shutdown. This needs to be investigated further,
+ * similar behaviour occurs in 2.4 when the driver is configured
+ * as a module only. One hint may be that data is sometimes
+ * transmitted at 9600 baud during shutdown (regardless of the
+ * speed the chip was configured for when the port was open).
+ */
+#if 0
+ /* Power Down */
+ tmp = readb(&up->regs->rw.ccr0);
+ tmp &= ~SAB82532_CCR0_PU;
+ writeb(tmp, &up->regs->rw.ccr0);
+#endif
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+/*
+ * This is used to figure out the divisor speeds.
+ *
+ * The formula is: Baud = SAB_BASE_BAUD / ((N + 1) * (1 << M)),
+ *
+ * with 0 <= N < 64 and 0 <= M < 16
+ */
+
+static void calc_ebrg(int baud, int *n_ret, int *m_ret)
+{
+ int n, m;
+
+ if (baud == 0) {
+ *n_ret = 0;
+ *m_ret = 0;
+ return;
+ }
+
+ /*
+ * We scale numbers by 10 so that we get better accuracy
+ * without having to use floating point. Here we increment m
+ * until n is within the valid range.
+ */
+ n = (SAB_BASE_BAUD * 10) / baud;
+ m = 0;
+ while (n >= 640) {
+ n = n / 2;
+ m++;
+ }
+ n = (n+5) / 10;
+ /*
+ * We try very hard to avoid speeds with M == 0 since they may
+ * not work correctly for XTAL frequences above 10 MHz.
+ */
+ if ((m == 0) && ((n & 1) == 0)) {
+ n = n / 2;
+ m++;
+ }
+ *n_ret = n - 1;
+ *m_ret = m;
+}
+
+/* Internal routine, port->lock is held and local interrupts are disabled. */
+static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cflag,
+ unsigned int iflag, int baud)
+{
+ unsigned int ebrg;
+ unsigned char dafo;
+ int bits, n, m;
+
+ /* Byte size and parity */
+ switch (cflag & CSIZE) {
+ case CS5: dafo = SAB82532_DAFO_CHL5; bits = 7; break;
+ case CS6: dafo = SAB82532_DAFO_CHL6; bits = 8; break;
+ case CS7: dafo = SAB82532_DAFO_CHL7; bits = 9; break;
+ case CS8: dafo = SAB82532_DAFO_CHL8; bits = 10; break;
+ /* Never happens, but GCC is too dumb to figure it out */
+ default: dafo = SAB82532_DAFO_CHL5; bits = 7; break;
+ }
+
+ if (cflag & CSTOPB) {
+ dafo |= SAB82532_DAFO_STOP;
+ bits++;
+ }
+
+ if (cflag & PARENB) {
+ dafo |= SAB82532_DAFO_PARE;
+ bits++;
+ }
+
+ if (cflag & PARODD) {
+ dafo |= SAB82532_DAFO_PAR_ODD;
+ } else {
+ dafo |= SAB82532_DAFO_PAR_EVEN;
+ }
+
+ calc_ebrg(baud, &n, &m);
+
+ ebrg = n | (m << 6);
+
+ up->tec_timeout = (10 * 1000000) / baud;
+ up->cec_timeout = up->tec_timeout >> 2;
+
+ /* CTS flow control flags */
+ /* We encode read_status_mask and ignore_status_mask like so:
+ *
+ * ---------------------
+ * | ... | ISR1 | ISR0 |
+ * ---------------------
+ * .. 15 8 7 0
+ */
+
+ up->port.read_status_mask = (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME |
+ SAB82532_ISR0_RFO | SAB82532_ISR0_RPF |
+ SAB82532_ISR0_CDSC);
+ up->port.read_status_mask |= (SAB82532_ISR1_CSC |
+ SAB82532_ISR1_ALLS |
+ SAB82532_ISR1_XPR) << 8;
+ if (iflag & INPCK)
+ up->port.read_status_mask |= (SAB82532_ISR0_PERR |
+ SAB82532_ISR0_FERR);
+ if (iflag & (BRKINT | PARMRK))
+ up->port.read_status_mask |= (SAB82532_ISR1_BRK << 8);
+
+ /*
+ * Characteres to ignore
+ */
+ up->port.ignore_status_mask = 0;
+ if (iflag & IGNPAR)
+ up->port.ignore_status_mask |= (SAB82532_ISR0_PERR |
+ SAB82532_ISR0_FERR);
+ if (iflag & IGNBRK) {
+ up->port.ignore_status_mask |= (SAB82532_ISR1_BRK << 8);
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (iflag & IGNPAR)
+ up->port.ignore_status_mask |= SAB82532_ISR0_RFO;
+ }
+
+ /*
+ * ignore all characters if CREAD is not set
+ */
+ if ((cflag & CREAD) == 0)
+ up->port.ignore_status_mask |= (SAB82532_ISR0_RPF |
+ SAB82532_ISR0_TCD);
+
+ /* Now bang the new settings into the chip. */
+ sunsab_cec_wait(up);
+ sunsab_tec_wait(up);
+ writeb(dafo, &up->regs->w.dafo);
+ writeb(ebrg & 0xff, &up->regs->w.bgr);
+ writeb((readb(&up->regs->rw.ccr2) & ~0xc0) | ((ebrg >> 2) & 0xc0),
+ &up->regs->rw.ccr2);
+
+ writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_RAC, &up->regs->rw.mode);
+
+}
+
+/* port->lock is not held. */
+static void sunsab_set_termios(struct uart_port *port, struct termios *termios,
+ struct termios *old)
+{
+ struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
+ unsigned long flags;
+ int baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ sunsab_convert_to_sab(up, termios->c_cflag, termios->c_iflag, baud);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static const char *sunsab_type(struct uart_port *port)
+{
+ struct uart_sunsab_port *up = (void *)port;
+ static char buf[36];
+
+ sprintf(buf, "SAB82532 %s", sab82532_version[up->type]);
+ return buf;
+}
+
+static void sunsab_release_port(struct uart_port *port)
+{
+}
+
+static int sunsab_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+static void sunsab_config_port(struct uart_port *port, int flags)
+{
+}
+
+static int sunsab_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ return -EINVAL;
+}
+
+static struct uart_ops sunsab_pops = {
+ .tx_empty = sunsab_tx_empty,
+ .set_mctrl = sunsab_set_mctrl,
+ .get_mctrl = sunsab_get_mctrl,
+ .stop_tx = sunsab_stop_tx,
+ .start_tx = sunsab_start_tx,
+ .send_xchar = sunsab_send_xchar,
+ .stop_rx = sunsab_stop_rx,
+ .enable_ms = sunsab_enable_ms,
+ .break_ctl = sunsab_break_ctl,
+ .startup = sunsab_startup,
+ .shutdown = sunsab_shutdown,
+ .set_termios = sunsab_set_termios,
+ .type = sunsab_type,
+ .release_port = sunsab_release_port,
+ .request_port = sunsab_request_port,
+ .config_port = sunsab_config_port,
+ .verify_port = sunsab_verify_port,
+};
+
+static struct uart_driver sunsab_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "serial",
+ .devfs_name = "tts/",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+};
+
+static struct uart_sunsab_port *sunsab_ports;
+static int num_channels;
+
+#ifdef CONFIG_SERIAL_SUNSAB_CONSOLE
+
+static __inline__ void sunsab_console_putchar(struct uart_sunsab_port *up, char c)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ sunsab_tec_wait(up);
+ writeb(c, &up->regs->w.tic);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void sunsab_console_write(struct console *con, const char *s, unsigned n)
+{
+ struct uart_sunsab_port *up = &sunsab_ports[con->index];
+ int i;
+
+ for (i = 0; i < n; i++) {
+ if (*s == '\n')
+ sunsab_console_putchar(up, '\r');
+ sunsab_console_putchar(up, *s++);
+ }
+ sunsab_tec_wait(up);
+}
+
+static int sunsab_console_setup(struct console *con, char *options)
+{
+ struct uart_sunsab_port *up = &sunsab_ports[con->index];
+ unsigned long flags;
+ int baud;
+
+ printk("Console: ttyS%d (SAB82532)\n",
+ (sunsab_reg.minor - 64) + con->index);
+
+ sunserial_console_termios(con);
+
+ /* Firmware console speed is limited to 150-->38400 baud so
+ * this hackish cflag thing is OK.
+ */
+ switch (con->cflag & CBAUD) {
+ case B150: baud = 150; break;
+ case B300: baud = 300; break;
+ case B600: baud = 600; break;
+ case B1200: baud = 1200; break;
+ case B2400: baud = 2400; break;
+ case B4800: baud = 4800; break;
+ default: case B9600: baud = 9600; break;
+ case B19200: baud = 19200; break;
+ case B38400: baud = 38400; break;
+ };
+
+ /*
+ * Temporary fix.
+ */
+ spin_lock_init(&up->port.lock);
+
+ /*
+ * Initialize the hardware
+ */
+ sunsab_startup(&up->port);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ /*
+ * Finally, enable interrupts
+ */
+ up->interrupt_mask0 = SAB82532_IMR0_PERR | SAB82532_IMR0_FERR |
+ SAB82532_IMR0_PLLA | SAB82532_IMR0_CDSC;
+ writeb(up->interrupt_mask0, &up->regs->w.imr0);
+ up->interrupt_mask1 = SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS |
+ SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN |
+ SAB82532_IMR1_CSC | SAB82532_IMR1_XON |
+ SAB82532_IMR1_XPR;
+ writeb(up->interrupt_mask1, &up->regs->w.imr1);
+
+ sunsab_convert_to_sab(up, con->cflag, 0, baud);
+ sunsab_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return 0;
+}
+
+static struct console sunsab_console = {
+ .name = "ttyS",
+ .write = sunsab_console_write,
+ .device = uart_console_device,
+ .setup = sunsab_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &sunsab_reg,
+};
+#define SUNSAB_CONSOLE (&sunsab_console)
+
+static void __init sunsab_console_init(void)
+{
+ int i;
+
+ if (con_is_present())
+ return;
+
+ for (i = 0; i < num_channels; i++) {
+ int this_minor = sunsab_reg.minor + i;
+
+ if ((this_minor - 64) == (serial_console - 1))
+ break;
+ }
+ if (i == num_channels)
+ return;
+
+ sunsab_console.index = i;
+ register_console(&sunsab_console);
+}
+#else
+#define SUNSAB_CONSOLE (NULL)
+#define sunsab_console_init() do { } while (0)
+#endif
+
+static void __init for_each_sab_edev(void (*callback)(struct linux_ebus_device *, void *), void *arg)
+{
+ struct linux_ebus *ebus;
+ struct linux_ebus_device *edev = NULL;
+
+ for_each_ebus(ebus) {
+ for_each_ebusdev(edev, ebus) {
+ if (!strcmp(edev->prom_name, "se")) {
+ callback(edev, arg);
+ continue;
+ } else if (!strcmp(edev->prom_name, "serial")) {
+ char compat[32];
+ int clen;
+
+ /* On RIO this can be an SE, check it. We could
+ * just check ebus->is_rio, but this is more portable.
+ */
+ clen = prom_getproperty(edev->prom_node, "compatible",
+ compat, sizeof(compat));
+ if (clen > 0) {
+ if (strncmp(compat, "sab82532", 8) == 0) {
+ callback(edev, arg);
+ continue;
+ }
+ }
+ }
+ }
+ }
+}
+
+static void __init sab_count_callback(struct linux_ebus_device *edev, void *arg)
+{
+ int *count_p = arg;
+
+ (*count_p)++;
+}
+
+static void __init sab_attach_callback(struct linux_ebus_device *edev, void *arg)
+{
+ int *instance_p = arg;
+ struct uart_sunsab_port *up;
+ unsigned long regs, offset;
+ int i;
+
+ /* Note: ports are located in reverse order */
+ regs = edev->resource[0].start;
+ offset = sizeof(union sab82532_async_regs);
+ for (i = 0; i < 2; i++) {
+ up = &sunsab_ports[(*instance_p * 2) + 1 - i];
+
+ memset(up, 0, sizeof(*up));
+ up->regs = ioremap(regs + offset, sizeof(union sab82532_async_regs));
+ up->port.irq = edev->irqs[0];
+ up->port.fifosize = SAB82532_XMIT_FIFO_SIZE;
+ up->port.mapbase = (unsigned long)up->regs;
+ up->port.iotype = SERIAL_IO_MEM;
+
+ writeb(SAB82532_IPC_IC_ACT_LOW, &up->regs->w.ipc);
+
+ offset -= sizeof(union sab82532_async_regs);
+ }
+
+ (*instance_p)++;
+}
+
+static int __init probe_for_sabs(void)
+{
+ int this_sab = 0;
+
+ /* Find device instances. */
+ for_each_sab_edev(&sab_count_callback, &this_sab);
+ if (!this_sab)
+ return -ENODEV;
+
+ /* Allocate tables. */
+ sunsab_ports = kmalloc(sizeof(struct uart_sunsab_port) * this_sab * 2,
+ GFP_KERNEL);
+ if (!sunsab_ports)
+ return -ENOMEM;
+
+ num_channels = this_sab * 2;
+
+ this_sab = 0;
+ for_each_sab_edev(&sab_attach_callback, &this_sab);
+ return 0;
+}
+
+static void __init sunsab_init_hw(void)
+{
+ int i;
+
+ for (i = 0; i < num_channels; i++) {
+ struct uart_sunsab_port *up = &sunsab_ports[i];
+
+ up->port.line = i;
+ up->port.ops = &sunsab_pops;
+ up->port.type = PORT_SUNSAB;
+ up->port.uartclk = SAB_BASE_BAUD;
+
+ up->type = readb(&up->regs->r.vstr) & 0x0f;
+ writeb(~((1 << 1) | (1 << 2) | (1 << 4)), &up->regs->w.pcr);
+ writeb(0xff, &up->regs->w.pim);
+ if (up->port.line == 0) {
+ up->pvr_dsr_bit = (1 << 0);
+ up->pvr_dtr_bit = (1 << 1);
+ } else {
+ up->pvr_dsr_bit = (1 << 3);
+ up->pvr_dtr_bit = (1 << 2);
+ }
+ writeb((1 << 1) | (1 << 2) | (1 << 4), &up->regs->w.pvr);
+ writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_FRTS,
+ &up->regs->rw.mode);
+ writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_RTS,
+ &up->regs->rw.mode);
+
+ up->tec_timeout = SAB82532_MAX_TEC_TIMEOUT;
+ up->cec_timeout = SAB82532_MAX_CEC_TIMEOUT;
+
+ if (!(up->port.line & 0x01)) {
+ if (request_irq(up->port.irq, sunsab_interrupt,
+ SA_SHIRQ, "serial(sab82532)", up)) {
+ printk("sunsab%d: can't get IRQ %x\n",
+ i, up->port.irq);
+ continue;
+ }
+ }
+ }
+}
+
+static int __init sunsab_init(void)
+{
+ int ret = probe_for_sabs();
+ int i;
+
+ if (ret < 0)
+ return ret;
+
+ sunsab_init_hw();
+
+ sunsab_reg.minor = sunserial_current_minor;
+ sunsab_reg.nr = num_channels;
+ sunsab_reg.cons = SUNSAB_CONSOLE;
+
+ ret = uart_register_driver(&sunsab_reg);
+ if (ret < 0) {
+ int i;
+
+ for (i = 0; i < num_channels; i++) {
+ struct uart_sunsab_port *up = &sunsab_ports[i];
+
+ if (!(up->port.line & 0x01))
+ free_irq(up->port.irq, up);
+ iounmap(up->regs);
+ }
+ kfree(sunsab_ports);
+ sunsab_ports = NULL;
+
+ return ret;
+ }
+
+ sunserial_current_minor += num_channels;
+
+ sunsab_console_init();
+
+ for (i = 0; i < num_channels; i++) {
+ struct uart_sunsab_port *up = &sunsab_ports[i];
+
+ uart_add_one_port(&sunsab_reg, &up->port);
+ }
+
+ return 0;
+}
+
+static void __exit sunsab_exit(void)
+{
+ int i;
+
+ for (i = 0; i < num_channels; i++) {
+ struct uart_sunsab_port *up = &sunsab_ports[i];
+
+ uart_remove_one_port(&sunsab_reg, &up->port);
+
+ if (!(up->port.line & 0x01))
+ free_irq(up->port.irq, up);
+ iounmap(up->regs);
+ }
+
+ sunserial_current_minor -= num_channels;
+ uart_unregister_driver(&sunsab_reg);
+
+ kfree(sunsab_ports);
+ sunsab_ports = NULL;
+}
+
+module_init(sunsab_init);
+module_exit(sunsab_exit);
+
+MODULE_AUTHOR("Eddie C. Dost and David S. Miller");
+MODULE_DESCRIPTION("Sun SAB82532 serial port driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/sunsab.h b/drivers/serial/sunsab.h
new file mode 100644
index 00000000000..686086fcbbf
--- /dev/null
+++ b/drivers/serial/sunsab.h
@@ -0,0 +1,321 @@
+/* sunsab.h: Register Definitions for the Siemens SAB82532 DUSCC
+ *
+ * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
+ */
+
+#ifndef _SUNSAB_H
+#define _SUNSAB_H
+
+struct sab82532_async_rd_regs {
+ u8 rfifo[0x20]; /* Receive FIFO */
+ u8 star; /* Status Register */
+ u8 __pad1;
+ u8 mode; /* Mode Register */
+ u8 timr; /* Timer Register */
+ u8 xon; /* XON Character */
+ u8 xoff; /* XOFF Character */
+ u8 tcr; /* Termination Character Register */
+ u8 dafo; /* Data Format */
+ u8 rfc; /* RFIFO Control Register */
+ u8 __pad2;
+ u8 rbcl; /* Receive Byte Count Low */
+ u8 rbch; /* Receive Byte Count High */
+ u8 ccr0; /* Channel Configuration Register 0 */
+ u8 ccr1; /* Channel Configuration Register 1 */
+ u8 ccr2; /* Channel Configuration Register 2 */
+ u8 ccr3; /* Channel Configuration Register 3 */
+ u8 __pad3[4];
+ u8 vstr; /* Version Status Register */
+ u8 __pad4[3];
+ u8 gis; /* Global Interrupt Status */
+ u8 ipc; /* Interrupt Port Configuration */
+ u8 isr0; /* Interrupt Status 0 */
+ u8 isr1; /* Interrupt Status 1 */
+ u8 pvr; /* Port Value Register */
+ u8 pis; /* Port Interrupt Status */
+ u8 pcr; /* Port Configuration Register */
+ u8 ccr4; /* Channel Configuration Register 4 */
+};
+
+struct sab82532_async_wr_regs {
+ u8 xfifo[0x20]; /* Transmit FIFO */
+ u8 cmdr; /* Command Register */
+ u8 __pad1;
+ u8 mode;
+ u8 timr;
+ u8 xon;
+ u8 xoff;
+ u8 tcr;
+ u8 dafo;
+ u8 rfc;
+ u8 __pad2;
+ u8 xbcl; /* Transmit Byte Count Low */
+ u8 xbch; /* Transmit Byte Count High */
+ u8 ccr0;
+ u8 ccr1;
+ u8 ccr2;
+ u8 ccr3;
+ u8 tsax; /* Time-Slot Assignment Reg. Transmit */
+ u8 tsar; /* Time-Slot Assignment Reg. Receive */
+ u8 xccr; /* Transmit Channel Capacity Register */
+ u8 rccr; /* Receive Channel Capacity Register */
+ u8 bgr; /* Baud Rate Generator Register */
+ u8 tic; /* Transmit Immediate Character */
+ u8 mxn; /* Mask XON Character */
+ u8 mxf; /* Mask XOFF Character */
+ u8 iva; /* Interrupt Vector Address */
+ u8 ipc;
+ u8 imr0; /* Interrupt Mask Register 0 */
+ u8 imr1; /* Interrupt Mask Register 1 */
+ u8 pvr;
+ u8 pim; /* Port Interrupt Mask */
+ u8 pcr;
+ u8 ccr4;
+};
+
+struct sab82532_async_rw_regs { /* Read/Write registers */
+ u8 __pad1[0x20];
+ u8 __pad2;
+ u8 __pad3;
+ u8 mode;
+ u8 timr;
+ u8 xon;
+ u8 xoff;
+ u8 tcr;
+ u8 dafo;
+ u8 rfc;
+ u8 __pad4;
+ u8 __pad5;
+ u8 __pad6;
+ u8 ccr0;
+ u8 ccr1;
+ u8 ccr2;
+ u8 ccr3;
+ u8 __pad7;
+ u8 __pad8;
+ u8 __pad9;
+ u8 __pad10;
+ u8 __pad11;
+ u8 __pad12;
+ u8 __pad13;
+ u8 __pad14;
+ u8 __pad15;
+ u8 ipc;
+ u8 __pad16;
+ u8 __pad17;
+ u8 pvr;
+ u8 __pad18;
+ u8 pcr;
+ u8 ccr4;
+};
+
+union sab82532_async_regs {
+ __volatile__ struct sab82532_async_rd_regs r;
+ __volatile__ struct sab82532_async_wr_regs w;
+ __volatile__ struct sab82532_async_rw_regs rw;
+};
+
+union sab82532_irq_status {
+ unsigned short stat;
+ struct {
+ unsigned char isr0;
+ unsigned char isr1;
+ } sreg;
+};
+
+/* irqflags bits */
+#define SAB82532_ALLS 0x00000001
+#define SAB82532_XPR 0x00000002
+
+/* RFIFO Status Byte */
+#define SAB82532_RSTAT_PE 0x80
+#define SAB82532_RSTAT_FE 0x40
+#define SAB82532_RSTAT_PARITY 0x01
+
+/* Status Register (STAR) */
+#define SAB82532_STAR_XDOV 0x80
+#define SAB82532_STAR_XFW 0x40
+#define SAB82532_STAR_RFNE 0x20
+#define SAB82532_STAR_FCS 0x10
+#define SAB82532_STAR_TEC 0x08
+#define SAB82532_STAR_CEC 0x04
+#define SAB82532_STAR_CTS 0x02
+
+/* Command Register (CMDR) */
+#define SAB82532_CMDR_RMC 0x80
+#define SAB82532_CMDR_RRES 0x40
+#define SAB82532_CMDR_RFRD 0x20
+#define SAB82532_CMDR_STI 0x10
+#define SAB82532_CMDR_XF 0x08
+#define SAB82532_CMDR_XRES 0x01
+
+/* Mode Register (MODE) */
+#define SAB82532_MODE_FRTS 0x40
+#define SAB82532_MODE_FCTS 0x20
+#define SAB82532_MODE_FLON 0x10
+#define SAB82532_MODE_RAC 0x08
+#define SAB82532_MODE_RTS 0x04
+#define SAB82532_MODE_TRS 0x02
+#define SAB82532_MODE_TLP 0x01
+
+/* Timer Register (TIMR) */
+#define SAB82532_TIMR_CNT_MASK 0xe0
+#define SAB82532_TIMR_VALUE_MASK 0x1f
+
+/* Data Format (DAFO) */
+#define SAB82532_DAFO_XBRK 0x40
+#define SAB82532_DAFO_STOP 0x20
+#define SAB82532_DAFO_PAR_SPACE 0x00
+#define SAB82532_DAFO_PAR_ODD 0x08
+#define SAB82532_DAFO_PAR_EVEN 0x10
+#define SAB82532_DAFO_PAR_MARK 0x18
+#define SAB82532_DAFO_PARE 0x04
+#define SAB82532_DAFO_CHL8 0x00
+#define SAB82532_DAFO_CHL7 0x01
+#define SAB82532_DAFO_CHL6 0x02
+#define SAB82532_DAFO_CHL5 0x03
+
+/* RFIFO Control Register (RFC) */
+#define SAB82532_RFC_DPS 0x40
+#define SAB82532_RFC_DXS 0x20
+#define SAB82532_RFC_RFDF 0x10
+#define SAB82532_RFC_RFTH_1 0x00
+#define SAB82532_RFC_RFTH_4 0x04
+#define SAB82532_RFC_RFTH_16 0x08
+#define SAB82532_RFC_RFTH_32 0x0c
+#define SAB82532_RFC_TCDE 0x01
+
+/* Received Byte Count High (RBCH) */
+#define SAB82532_RBCH_DMA 0x80
+#define SAB82532_RBCH_CAS 0x20
+
+/* Transmit Byte Count High (XBCH) */
+#define SAB82532_XBCH_DMA 0x80
+#define SAB82532_XBCH_CAS 0x20
+#define SAB82532_XBCH_XC 0x10
+
+/* Channel Configuration Register 0 (CCR0) */
+#define SAB82532_CCR0_PU 0x80
+#define SAB82532_CCR0_MCE 0x40
+#define SAB82532_CCR0_SC_NRZ 0x00
+#define SAB82532_CCR0_SC_NRZI 0x08
+#define SAB82532_CCR0_SC_FM0 0x10
+#define SAB82532_CCR0_SC_FM1 0x14
+#define SAB82532_CCR0_SC_MANCH 0x18
+#define SAB82532_CCR0_SM_HDLC 0x00
+#define SAB82532_CCR0_SM_SDLC_LOOP 0x01
+#define SAB82532_CCR0_SM_BISYNC 0x02
+#define SAB82532_CCR0_SM_ASYNC 0x03
+
+/* Channel Configuration Register 1 (CCR1) */
+#define SAB82532_CCR1_ODS 0x10
+#define SAB82532_CCR1_BCR 0x08
+#define SAB82532_CCR1_CM_MASK 0x07
+
+/* Channel Configuration Register 2 (CCR2) */
+#define SAB82532_CCR2_SOC1 0x80
+#define SAB82532_CCR2_SOC0 0x40
+#define SAB82532_CCR2_BR9 0x80
+#define SAB82532_CCR2_BR8 0x40
+#define SAB82532_CCR2_BDF 0x20
+#define SAB82532_CCR2_SSEL 0x10
+#define SAB82532_CCR2_XCS0 0x20
+#define SAB82532_CCR2_RCS0 0x10
+#define SAB82532_CCR2_TOE 0x08
+#define SAB82532_CCR2_RWX 0x04
+#define SAB82532_CCR2_DIV 0x01
+
+/* Channel Configuration Register 3 (CCR3) */
+#define SAB82532_CCR3_PSD 0x01
+
+/* Time Slot Assignment Register Transmit (TSAX) */
+#define SAB82532_TSAX_TSNX_MASK 0xfc
+#define SAB82532_TSAX_XCS2 0x02 /* see also CCR2 */
+#define SAB82532_TSAX_XCS1 0x01
+
+/* Time Slot Assignment Register Receive (TSAR) */
+#define SAB82532_TSAR_TSNR_MASK 0xfc
+#define SAB82532_TSAR_RCS2 0x02 /* see also CCR2 */
+#define SAB82532_TSAR_RCS1 0x01
+
+/* Version Status Register (VSTR) */
+#define SAB82532_VSTR_CD 0x80
+#define SAB82532_VSTR_DPLA 0x40
+#define SAB82532_VSTR_VN_MASK 0x0f
+#define SAB82532_VSTR_VN_1 0x00
+#define SAB82532_VSTR_VN_2 0x01
+#define SAB82532_VSTR_VN_3_2 0x02
+
+/* Global Interrupt Status Register (GIS) */
+#define SAB82532_GIS_PI 0x80
+#define SAB82532_GIS_ISA1 0x08
+#define SAB82532_GIS_ISA0 0x04
+#define SAB82532_GIS_ISB1 0x02
+#define SAB82532_GIS_ISB0 0x01
+
+/* Interrupt Vector Address (IVA) */
+#define SAB82532_IVA_MASK 0xf1
+
+/* Interrupt Port Configuration (IPC) */
+#define SAB82532_IPC_VIS 0x80
+#define SAB82532_IPC_SLA1 0x10
+#define SAB82532_IPC_SLA0 0x08
+#define SAB82532_IPC_CASM 0x04
+#define SAB82532_IPC_IC_OPEN_DRAIN 0x00
+#define SAB82532_IPC_IC_ACT_LOW 0x01
+#define SAB82532_IPC_IC_ACT_HIGH 0x03
+
+/* Interrupt Status Register 0 (ISR0) */
+#define SAB82532_ISR0_TCD 0x80
+#define SAB82532_ISR0_TIME 0x40
+#define SAB82532_ISR0_PERR 0x20
+#define SAB82532_ISR0_FERR 0x10
+#define SAB82532_ISR0_PLLA 0x08
+#define SAB82532_ISR0_CDSC 0x04
+#define SAB82532_ISR0_RFO 0x02
+#define SAB82532_ISR0_RPF 0x01
+
+/* Interrupt Status Register 1 (ISR1) */
+#define SAB82532_ISR1_BRK 0x80
+#define SAB82532_ISR1_BRKT 0x40
+#define SAB82532_ISR1_ALLS 0x20
+#define SAB82532_ISR1_XOFF 0x10
+#define SAB82532_ISR1_TIN 0x08
+#define SAB82532_ISR1_CSC 0x04
+#define SAB82532_ISR1_XON 0x02
+#define SAB82532_ISR1_XPR 0x01
+
+/* Interrupt Mask Register 0 (IMR0) */
+#define SAB82532_IMR0_TCD 0x80
+#define SAB82532_IMR0_TIME 0x40
+#define SAB82532_IMR0_PERR 0x20
+#define SAB82532_IMR0_FERR 0x10
+#define SAB82532_IMR0_PLLA 0x08
+#define SAB82532_IMR0_CDSC 0x04
+#define SAB82532_IMR0_RFO 0x02
+#define SAB82532_IMR0_RPF 0x01
+
+/* Interrupt Mask Register 1 (IMR1) */
+#define SAB82532_IMR1_BRK 0x80
+#define SAB82532_IMR1_BRKT 0x40
+#define SAB82532_IMR1_ALLS 0x20
+#define SAB82532_IMR1_XOFF 0x10
+#define SAB82532_IMR1_TIN 0x08
+#define SAB82532_IMR1_CSC 0x04
+#define SAB82532_IMR1_XON 0x02
+#define SAB82532_IMR1_XPR 0x01
+
+/* Port Interrupt Status Register (PIS) */
+#define SAB82532_PIS_SYNC_B 0x08
+#define SAB82532_PIS_DTR_B 0x04
+#define SAB82532_PIS_DTR_A 0x02
+#define SAB82532_PIS_SYNC_A 0x01
+
+/* Channel Configuration Register 4 (CCR4) */
+#define SAB82532_CCR4_MCK4 0x80
+#define SAB82532_CCR4_EBRG 0x40
+#define SAB82532_CCR4_TST1 0x20
+#define SAB82532_CCR4_ICD 0x10
+
+
+#endif /* !(_SUNSAB_H) */
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
new file mode 100644
index 00000000000..23d19d39432
--- /dev/null
+++ b/drivers/serial/sunsu.c
@@ -0,0 +1,1742 @@
+/* $Id: su.c,v 1.55 2002/01/08 16:00:16 davem Exp $
+ * su.c: Small serial driver for keyboard/mouse interface on sparc32/PCI
+ *
+ * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
+ * Copyright (C) 1998-1999 Pete Zaitcev (zaitcev@yahoo.com)
+ *
+ * This is mainly a variation of 8250.c, credits go to authors mentioned
+ * therein. In fact this driver should be merged into the generic 8250.c
+ * infrastructure perhaps using a 8250_sparc.c module.
+ *
+ * Fixed to use tty_get_baud_rate().
+ * Theodore Ts'o <tytso@mit.edu>, 2001-Oct-12
+ *
+ * Converted to new 2.5.x UART layer.
+ * David S. Miller (davem@redhat.com), 2002-Jul-29
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/circ_buf.h>
+#include <linux/serial.h>
+#include <linux/sysrq.h>
+#include <linux/console.h>
+#ifdef CONFIG_SERIO
+#include <linux/serio.h>
+#endif
+#include <linux/serial_reg.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/oplib.h>
+#include <asm/ebus.h>
+#ifdef CONFIG_SPARC64
+#include <asm/isa.h>
+#endif
+
+#if defined(CONFIG_SERIAL_SUNSU_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/serial_core.h>
+
+#include "suncore.h"
+
+/* We are on a NS PC87303 clocked with 24.0 MHz, which results
+ * in a UART clock of 1.8462 MHz.
+ */
+#define SU_BASE_BAUD (1846200 / 16)
+
+enum su_type { SU_PORT_NONE, SU_PORT_MS, SU_PORT_KBD, SU_PORT_PORT };
+static char *su_typev[] = { "su(???)", "su(mouse)", "su(kbd)", "su(serial)" };
+
+/*
+ * Here we define the default xmit fifo size used for each type of UART.
+ */
+static const struct serial_uart_config uart_config[PORT_MAX_8250+1] = {
+ { "unknown", 1, 0 },
+ { "8250", 1, 0 },
+ { "16450", 1, 0 },
+ { "16550", 1, 0 },
+ { "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO },
+ { "Cirrus", 1, 0 },
+ { "ST16650", 1, UART_CLEAR_FIFO | UART_STARTECH },
+ { "ST16650V2", 32, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
+ { "TI16750", 64, UART_CLEAR_FIFO | UART_USE_FIFO },
+ { "Startech", 1, 0 },
+ { "16C950/954", 128, UART_CLEAR_FIFO | UART_USE_FIFO },
+ { "ST16654", 64, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
+ { "XR16850", 128, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
+ { "RSA", 2048, UART_CLEAR_FIFO | UART_USE_FIFO }
+};
+
+struct uart_sunsu_port {
+ struct uart_port port;
+ unsigned char acr;
+ unsigned char ier;
+ unsigned short rev;
+ unsigned char lcr;
+ unsigned int lsr_break_flag;
+ unsigned int cflag;
+
+ /* Probing information. */
+ enum su_type su_type;
+ unsigned int type_probed; /* XXX Stupid */
+ int port_node;
+
+#ifdef CONFIG_SERIO
+ struct serio *serio;
+ int serio_open;
+#endif
+};
+
+#define _INLINE_
+
+static _INLINE_ unsigned int serial_in(struct uart_sunsu_port *up, int offset)
+{
+ offset <<= up->port.regshift;
+
+ switch (up->port.iotype) {
+ case SERIAL_IO_HUB6:
+ outb(up->port.hub6 - 1 + offset, up->port.iobase);
+ return inb(up->port.iobase + 1);
+
+ case SERIAL_IO_MEM:
+ return readb(up->port.membase + offset);
+
+ default:
+ return inb(up->port.iobase + offset);
+ }
+}
+
+static _INLINE_ void
+serial_out(struct uart_sunsu_port *up, int offset, int value)
+{
+#ifndef CONFIG_SPARC64
+ /*
+ * MrCoffee has weird schematics: IRQ4 & P10(?) pins of SuperIO are
+ * connected with a gate then go to SlavIO. When IRQ4 goes tristated
+ * gate outputs a logical one. Since we use level triggered interrupts
+ * we have lockup and watchdog reset. We cannot mask IRQ because
+ * keyboard shares IRQ with us (Word has it as Bob Smelik's design).
+ * This problem is similar to what Alpha people suffer, see serial.c.
+ */
+ if (offset == UART_MCR)
+ value |= UART_MCR_OUT2;
+#endif
+ offset <<= up->port.regshift;
+
+ switch (up->port.iotype) {
+ case SERIAL_IO_HUB6:
+ outb(up->port.hub6 - 1 + offset, up->port.iobase);
+ outb(value, up->port.iobase + 1);
+ break;
+
+ case SERIAL_IO_MEM:
+ writeb(value, up->port.membase + offset);
+ break;
+
+ default:
+ outb(value, up->port.iobase + offset);
+ }
+}
+
+/*
+ * We used to support using pause I/O for certain machines. We
+ * haven't supported this for a while, but just in case it's badly
+ * needed for certain old 386 machines, I've left these #define's
+ * in....
+ */
+#define serial_inp(up, offset) serial_in(up, offset)
+#define serial_outp(up, offset, value) serial_out(up, offset, value)
+
+
+/*
+ * For the 16C950
+ */
+static void serial_icr_write(struct uart_sunsu_port *up, int offset, int value)
+{
+ serial_out(up, UART_SCR, offset);
+ serial_out(up, UART_ICR, value);
+}
+
+#if 0 /* Unused currently */
+static unsigned int serial_icr_read(struct uart_sunsu_port *up, int offset)
+{
+ unsigned int value;
+
+ serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD);
+ serial_out(up, UART_SCR, offset);
+ value = serial_in(up, UART_ICR);
+ serial_icr_write(up, UART_ACR, up->acr);
+
+ return value;
+}
+#endif
+
+#ifdef CONFIG_SERIAL_8250_RSA
+/*
+ * Attempts to turn on the RSA FIFO. Returns zero on failure.
+ * We set the port uart clock rate if we succeed.
+ */
+static int __enable_rsa(struct uart_sunsu_port *up)
+{
+ unsigned char mode;
+ int result;
+
+ mode = serial_inp(up, UART_RSA_MSR);
+ result = mode & UART_RSA_MSR_FIFO;
+
+ if (!result) {
+ serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);
+ mode = serial_inp(up, UART_RSA_MSR);
+ result = mode & UART_RSA_MSR_FIFO;
+ }
+
+ if (result)
+ up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16;
+
+ return result;
+}
+
+static void enable_rsa(struct uart_sunsu_port *up)
+{
+ if (up->port.type == PORT_RSA) {
+ if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) {
+ spin_lock_irq(&up->port.lock);
+ __enable_rsa(up);
+ spin_unlock_irq(&up->port.lock);
+ }
+ if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16)
+ serial_outp(up, UART_RSA_FRR, 0);
+ }
+}
+
+/*
+ * Attempts to turn off the RSA FIFO. Returns zero on failure.
+ * It is unknown why interrupts were disabled in here. However,
+ * the caller is expected to preserve this behaviour by grabbing
+ * the spinlock before calling this function.
+ */
+static void disable_rsa(struct uart_sunsu_port *up)
+{
+ unsigned char mode;
+ int result;
+
+ if (up->port.type == PORT_RSA &&
+ up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) {
+ spin_lock_irq(&up->port.lock);
+
+ mode = serial_inp(up, UART_RSA_MSR);
+ result = !(mode & UART_RSA_MSR_FIFO);
+
+ if (!result) {
+ serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);
+ mode = serial_inp(up, UART_RSA_MSR);
+ result = !(mode & UART_RSA_MSR_FIFO);
+ }
+
+ if (result)
+ up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16;
+ spin_unlock_irq(&up->port.lock);
+ }
+}
+#endif /* CONFIG_SERIAL_8250_RSA */
+
+static void sunsu_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
+
+ if (up->ier & UART_IER_THRI) {
+ up->ier &= ~UART_IER_THRI;
+ serial_out(up, UART_IER, up->ier);
+ }
+ if (up->port.type == PORT_16C950 && tty_stop) {
+ up->acr |= UART_ACR_TXDIS;
+ serial_icr_write(up, UART_ACR, up->acr);
+ }
+}
+
+static void sunsu_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+ struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
+
+ if (!(up->ier & UART_IER_THRI)) {
+ up->ier |= UART_IER_THRI;
+ serial_out(up, UART_IER, up->ier);
+ }
+ /*
+ * We only do this from uart_start
+ */
+ if (tty_start && up->port.type == PORT_16C950) {
+ up->acr &= ~UART_ACR_TXDIS;
+ serial_icr_write(up, UART_ACR, up->acr);
+ }
+}
+
+static void sunsu_stop_rx(struct uart_port *port)
+{
+ struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ up->ier &= ~UART_IER_RLSI;
+ up->port.read_status_mask &= ~UART_LSR_DR;
+ serial_out(up, UART_IER, up->ier);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void sunsu_enable_ms(struct uart_port *port)
+{
+ struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ up->ier |= UART_IER_MSI;
+ serial_out(up, UART_IER, up->ier);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static _INLINE_ struct tty_struct *
+receive_chars(struct uart_sunsu_port *up, unsigned char *status, struct pt_regs *regs)
+{
+ struct tty_struct *tty = up->port.info->tty;
+ unsigned char ch;
+ int max_count = 256;
+ int saw_console_brk = 0;
+
+ do {
+ if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
+ tty->flip.work.func((void *)tty);
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+ return tty; // if TTY_DONT_FLIP is set
+ }
+ ch = serial_inp(up, UART_RX);
+ *tty->flip.char_buf_ptr = ch;
+ *tty->flip.flag_buf_ptr = TTY_NORMAL;
+ up->port.icount.rx++;
+
+ if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
+ UART_LSR_FE | UART_LSR_OE))) {
+ /*
+ * For statistics only
+ */
+ if (*status & UART_LSR_BI) {
+ *status &= ~(UART_LSR_FE | UART_LSR_PE);
+ up->port.icount.brk++;
+ if (up->port.cons != NULL &&
+ up->port.line == up->port.cons->index)
+ saw_console_brk = 1;
+ /*
+ * We do the SysRQ and SAK checking
+ * here because otherwise the break
+ * may get masked by ignore_status_mask
+ * or read_status_mask.
+ */
+ if (uart_handle_break(&up->port))
+ goto ignore_char;
+ } else if (*status & UART_LSR_PE)
+ up->port.icount.parity++;
+ else if (*status & UART_LSR_FE)
+ up->port.icount.frame++;
+ if (*status & UART_LSR_OE)
+ up->port.icount.overrun++;
+
+ /*
+ * Mask off conditions which should be ingored.
+ */
+ *status &= up->port.read_status_mask;
+
+ if (up->port.cons != NULL &&
+ up->port.line == up->port.cons->index) {
+ /* Recover the break flag from console xmit */
+ *status |= up->lsr_break_flag;
+ up->lsr_break_flag = 0;
+ }
+
+ if (*status & UART_LSR_BI) {
+ *tty->flip.flag_buf_ptr = TTY_BREAK;
+ } else if (*status & UART_LSR_PE)
+ *tty->flip.flag_buf_ptr = TTY_PARITY;
+ else if (*status & UART_LSR_FE)
+ *tty->flip.flag_buf_ptr = TTY_FRAME;
+ }
+ if (uart_handle_sysrq_char(&up->port, ch, regs))
+ goto ignore_char;
+ if ((*status & up->port.ignore_status_mask) == 0) {
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ tty->flip.count++;
+ }
+ if ((*status & UART_LSR_OE) &&
+ tty->flip.count < TTY_FLIPBUF_SIZE) {
+ /*
+ * Overrun is special, since it's reported
+ * immediately, and doesn't affect the current
+ * character.
+ */
+ *tty->flip.flag_buf_ptr = TTY_OVERRUN;
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ tty->flip.count++;
+ }
+ ignore_char:
+ *status = serial_inp(up, UART_LSR);
+ } while ((*status & UART_LSR_DR) && (max_count-- > 0));
+
+ if (saw_console_brk)
+ sun_do_break();
+
+ return tty;
+}
+
+static _INLINE_ void transmit_chars(struct uart_sunsu_port *up)
+{
+ struct circ_buf *xmit = &up->port.info->xmit;
+ int count;
+
+ if (up->port.x_char) {
+ serial_outp(up, UART_TX, up->port.x_char);
+ up->port.icount.tx++;
+ up->port.x_char = 0;
+ return;
+ }
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
+ sunsu_stop_tx(&up->port, 0);
+ return;
+ }
+
+ count = up->port.fifosize;
+ do {
+ serial_out(up, UART_TX, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ up->port.icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ } while (--count > 0);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+
+ if (uart_circ_empty(xmit))
+ sunsu_stop_tx(&up->port, 0);
+}
+
+static _INLINE_ void check_modem_status(struct uart_sunsu_port *up)
+{
+ int status;
+
+ status = serial_in(up, UART_MSR);
+
+ if ((status & UART_MSR_ANY_DELTA) == 0)
+ return;
+
+ if (status & UART_MSR_TERI)
+ up->port.icount.rng++;
+ if (status & UART_MSR_DDSR)
+ up->port.icount.dsr++;
+ if (status & UART_MSR_DDCD)
+ uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
+ if (status & UART_MSR_DCTS)
+ uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
+
+ wake_up_interruptible(&up->port.info->delta_msr_wait);
+}
+
+static irqreturn_t sunsu_serial_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct uart_sunsu_port *up = dev_id;
+ unsigned long flags;
+ unsigned char status;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ do {
+ struct tty_struct *tty;
+
+ status = serial_inp(up, UART_LSR);
+ tty = NULL;
+ if (status & UART_LSR_DR)
+ tty = receive_chars(up, &status, regs);
+ check_modem_status(up);
+ if (status & UART_LSR_THRE)
+ transmit_chars(up);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ if (tty)
+ tty_flip_buffer_push(tty);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ } while (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT));
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+/* Separate interrupt handling path for keyboard/mouse ports. */
+
+static void
+sunsu_change_speed(struct uart_port *port, unsigned int cflag,
+ unsigned int iflag, unsigned int quot);
+
+static void sunsu_change_mouse_baud(struct uart_sunsu_port *up)
+{
+ unsigned int cur_cflag = up->cflag;
+ int quot, new_baud;
+
+ up->cflag &= ~CBAUD;
+ up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud);
+
+ quot = up->port.uartclk / (16 * new_baud);
+
+ spin_unlock(&up->port.lock);
+
+ sunsu_change_speed(&up->port, up->cflag, 0, quot);
+
+ spin_lock(&up->port.lock);
+}
+
+static void receive_kbd_ms_chars(struct uart_sunsu_port *up, struct pt_regs *regs, int is_break)
+{
+ do {
+ unsigned char ch = serial_inp(up, UART_RX);
+
+ /* Stop-A is handled by drivers/char/keyboard.c now. */
+ if (up->su_type == SU_PORT_KBD) {
+#ifdef CONFIG_SERIO
+ serio_interrupt(up->serio, ch, 0, regs);
+#endif
+ } else if (up->su_type == SU_PORT_MS) {
+ int ret = suncore_mouse_baud_detection(ch, is_break);
+
+ switch (ret) {
+ case 2:
+ sunsu_change_mouse_baud(up);
+ /* fallthru */
+ case 1:
+ break;
+
+ case 0:
+#ifdef CONFIG_SERIO
+ serio_interrupt(up->serio, ch, 0, regs);
+#endif
+ break;
+ };
+ }
+ } while (serial_in(up, UART_LSR) & UART_LSR_DR);
+}
+
+static irqreturn_t sunsu_kbd_ms_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct uart_sunsu_port *up = dev_id;
+
+ if (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT)) {
+ unsigned char status = serial_inp(up, UART_LSR);
+
+ if ((status & UART_LSR_DR) || (status & UART_LSR_BI))
+ receive_kbd_ms_chars(up, regs,
+ (status & UART_LSR_BI) != 0);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static unsigned int sunsu_tx_empty(struct uart_port *port)
+{
+ struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
+ unsigned long flags;
+ unsigned int ret;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return ret;
+}
+
+static unsigned int sunsu_get_mctrl(struct uart_port *port)
+{
+ struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
+ unsigned long flags;
+ unsigned char status;
+ unsigned int ret;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ status = serial_in(up, UART_MSR);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ ret = 0;
+ if (status & UART_MSR_DCD)
+ ret |= TIOCM_CAR;
+ if (status & UART_MSR_RI)
+ ret |= TIOCM_RNG;
+ if (status & UART_MSR_DSR)
+ ret |= TIOCM_DSR;
+ if (status & UART_MSR_CTS)
+ ret |= TIOCM_CTS;
+ return ret;
+}
+
+static void sunsu_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
+ unsigned char mcr = 0;
+
+ if (mctrl & TIOCM_RTS)
+ mcr |= UART_MCR_RTS;
+ if (mctrl & TIOCM_DTR)
+ mcr |= UART_MCR_DTR;
+ if (mctrl & TIOCM_OUT1)
+ mcr |= UART_MCR_OUT1;
+ if (mctrl & TIOCM_OUT2)
+ mcr |= UART_MCR_OUT2;
+ if (mctrl & TIOCM_LOOP)
+ mcr |= UART_MCR_LOOP;
+
+ serial_out(up, UART_MCR, mcr);
+}
+
+static void sunsu_break_ctl(struct uart_port *port, int break_state)
+{
+ struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ if (break_state == -1)
+ up->lcr |= UART_LCR_SBC;
+ else
+ up->lcr &= ~UART_LCR_SBC;
+ serial_out(up, UART_LCR, up->lcr);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static int sunsu_startup(struct uart_port *port)
+{
+ struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
+ unsigned long flags;
+ int retval;
+
+ if (up->port.type == PORT_16C950) {
+ /* Wake up and initialize UART */
+ up->acr = 0;
+ serial_outp(up, UART_LCR, 0xBF);
+ serial_outp(up, UART_EFR, UART_EFR_ECB);
+ serial_outp(up, UART_IER, 0);
+ serial_outp(up, UART_LCR, 0);
+ serial_icr_write(up, UART_CSR, 0); /* Reset the UART */
+ serial_outp(up, UART_LCR, 0xBF);
+ serial_outp(up, UART_EFR, UART_EFR_ECB);
+ serial_outp(up, UART_LCR, 0);
+ }
+
+#ifdef CONFIG_SERIAL_8250_RSA
+ /*
+ * If this is an RSA port, see if we can kick it up to the
+ * higher speed clock.
+ */
+ enable_rsa(up);
+#endif
+
+ /*
+ * Clear the FIFO buffers and disable them.
+ * (they will be reeanbled in set_termios())
+ */
+ if (uart_config[up->port.type].flags & UART_CLEAR_FIFO) {
+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+ serial_outp(up, UART_FCR, 0);
+ }
+
+ /*
+ * Clear the interrupt registers.
+ */
+ (void) serial_inp(up, UART_LSR);
+ (void) serial_inp(up, UART_RX);
+ (void) serial_inp(up, UART_IIR);
+ (void) serial_inp(up, UART_MSR);
+
+ /*
+ * At this point, there's no way the LSR could still be 0xff;
+ * if it is, then bail out, because there's likely no UART
+ * here.
+ */
+ if (!(up->port.flags & ASYNC_BUGGY_UART) &&
+ (serial_inp(up, UART_LSR) == 0xff)) {
+ printk("ttyS%d: LSR safety check engaged!\n", up->port.line);
+ return -ENODEV;
+ }
+
+ if (up->su_type != SU_PORT_PORT) {
+ retval = request_irq(up->port.irq, sunsu_kbd_ms_interrupt,
+ SA_SHIRQ, su_typev[up->su_type], up);
+ } else {
+ retval = request_irq(up->port.irq, sunsu_serial_interrupt,
+ SA_SHIRQ, su_typev[up->su_type], up);
+ }
+ if (retval) {
+ printk("su: Cannot register IRQ %d\n", up->port.irq);
+ return retval;
+ }
+
+ /*
+ * Now, initialize the UART
+ */
+ serial_outp(up, UART_LCR, UART_LCR_WLEN8);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ up->port.mctrl |= TIOCM_OUT2;
+
+ sunsu_set_mctrl(&up->port, up->port.mctrl);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /*
+ * Finally, enable interrupts. Note: Modem status interrupts
+ * are set via set_termios(), which will be occurring imminently
+ * anyway, so we don't enable them here.
+ */
+ up->ier = UART_IER_RLSI | UART_IER_RDI;
+ serial_outp(up, UART_IER, up->ier);
+
+ if (up->port.flags & ASYNC_FOURPORT) {
+ unsigned int icp;
+ /*
+ * Enable interrupts on the AST Fourport board
+ */
+ icp = (up->port.iobase & 0xfe0) | 0x01f;
+ outb_p(0x80, icp);
+ (void) inb_p(icp);
+ }
+
+ /*
+ * And clear the interrupt registers again for luck.
+ */
+ (void) serial_inp(up, UART_LSR);
+ (void) serial_inp(up, UART_RX);
+ (void) serial_inp(up, UART_IIR);
+ (void) serial_inp(up, UART_MSR);
+
+ return 0;
+}
+
+static void sunsu_shutdown(struct uart_port *port)
+{
+ struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
+ unsigned long flags;
+
+ /*
+ * Disable interrupts from this port
+ */
+ up->ier = 0;
+ serial_outp(up, UART_IER, 0);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ if (up->port.flags & ASYNC_FOURPORT) {
+ /* reset interrupts on the AST Fourport board */
+ inb((up->port.iobase & 0xfe0) | 0x1f);
+ up->port.mctrl |= TIOCM_OUT1;
+ } else
+ up->port.mctrl &= ~TIOCM_OUT2;
+
+ sunsu_set_mctrl(&up->port, up->port.mctrl);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ /*
+ * Disable break condition and FIFOs
+ */
+ serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC);
+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR |
+ UART_FCR_CLEAR_XMIT);
+ serial_outp(up, UART_FCR, 0);
+
+#ifdef CONFIG_SERIAL_8250_RSA
+ /*
+ * Reset the RSA board back to 115kbps compat mode.
+ */
+ disable_rsa(up);
+#endif
+
+ /*
+ * Read data port to reset things.
+ */
+ (void) serial_in(up, UART_RX);
+
+ free_irq(up->port.irq, up);
+}
+
+static void
+sunsu_change_speed(struct uart_port *port, unsigned int cflag,
+ unsigned int iflag, unsigned int quot)
+{
+ struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
+ unsigned char cval, fcr = 0;
+ unsigned long flags;
+
+ switch (cflag & CSIZE) {
+ case CS5:
+ cval = 0x00;
+ break;
+ case CS6:
+ cval = 0x01;
+ break;
+ case CS7:
+ cval = 0x02;
+ break;
+ default:
+ case CS8:
+ cval = 0x03;
+ break;
+ }
+
+ if (cflag & CSTOPB)
+ cval |= 0x04;
+ if (cflag & PARENB)
+ cval |= UART_LCR_PARITY;
+ if (!(cflag & PARODD))
+ cval |= UART_LCR_EPAR;
+#ifdef CMSPAR
+ if (cflag & CMSPAR)
+ cval |= UART_LCR_SPAR;
+#endif
+
+ /*
+ * Work around a bug in the Oxford Semiconductor 952 rev B
+ * chip which causes it to seriously miscalculate baud rates
+ * when DLL is 0.
+ */
+ if ((quot & 0xff) == 0 && up->port.type == PORT_16C950 &&
+ up->rev == 0x5201)
+ quot ++;
+
+ if (uart_config[up->port.type].flags & UART_USE_FIFO) {
+ if ((up->port.uartclk / quot) < (2400 * 16))
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
+#ifdef CONFIG_SERIAL_8250_RSA
+ else if (up->port.type == PORT_RSA)
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_14;
+#endif
+ else
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_8;
+ }
+ if (up->port.type == PORT_16750)
+ fcr |= UART_FCR7_64BYTE;
+
+ /*
+ * Ok, we're now changing the port state. Do it with
+ * interrupts disabled.
+ */
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, cflag, (port->uartclk / (16 * quot)));
+
+ up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
+ if (iflag & INPCK)
+ up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+ if (iflag & (BRKINT | PARMRK))
+ up->port.read_status_mask |= UART_LSR_BI;
+
+ /*
+ * Characteres to ignore
+ */
+ up->port.ignore_status_mask = 0;
+ if (iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
+ if (iflag & IGNBRK) {
+ up->port.ignore_status_mask |= UART_LSR_BI;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (iflag & IGNPAR)
+ up->port.ignore_status_mask |= UART_LSR_OE;
+ }
+
+ /*
+ * ignore all characters if CREAD is not set
+ */
+ if ((cflag & CREAD) == 0)
+ up->port.ignore_status_mask |= UART_LSR_DR;
+
+ /*
+ * CTS flow control flag and modem status interrupts
+ */
+ up->ier &= ~UART_IER_MSI;
+ if (UART_ENABLE_MS(&up->port, cflag))
+ up->ier |= UART_IER_MSI;
+
+ serial_out(up, UART_IER, up->ier);
+
+ if (uart_config[up->port.type].flags & UART_STARTECH) {
+ serial_outp(up, UART_LCR, 0xBF);
+ serial_outp(up, UART_EFR, cflag & CRTSCTS ? UART_EFR_CTS :0);
+ }
+ serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
+ serial_outp(up, UART_DLL, quot & 0xff); /* LS of divisor */
+ serial_outp(up, UART_DLM, quot >> 8); /* MS of divisor */
+ if (up->port.type == PORT_16750)
+ serial_outp(up, UART_FCR, fcr); /* set fcr */
+ serial_outp(up, UART_LCR, cval); /* reset DLAB */
+ up->lcr = cval; /* Save LCR */
+ if (up->port.type != PORT_16750) {
+ if (fcr & UART_FCR_ENABLE_FIFO) {
+ /* emulated UARTs (Lucent Venus 167x) need two steps */
+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+ }
+ serial_outp(up, UART_FCR, fcr); /* set fcr */
+ }
+
+ up->cflag = cflag;
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static void
+sunsu_set_termios(struct uart_port *port, struct termios *termios,
+ struct termios *old)
+{
+ unsigned int baud, quot;
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ quot = uart_get_divisor(port, baud);
+
+ sunsu_change_speed(port, termios->c_cflag, termios->c_iflag, quot);
+}
+
+static void sunsu_release_port(struct uart_port *port)
+{
+}
+
+static int sunsu_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+static void sunsu_config_port(struct uart_port *port, int flags)
+{
+ struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
+
+ if (flags & UART_CONFIG_TYPE) {
+ /*
+ * We are supposed to call autoconfig here, but this requires
+ * splitting all the OBP probing crap from the UART probing.
+ * We'll do it when we kill sunsu.c altogether.
+ */
+ port->type = up->type_probed; /* XXX */
+ }
+}
+
+static int
+sunsu_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ return -EINVAL;
+}
+
+static const char *
+sunsu_type(struct uart_port *port)
+{
+ int type = port->type;
+
+ if (type >= ARRAY_SIZE(uart_config))
+ type = 0;
+ return uart_config[type].name;
+}
+
+static struct uart_ops sunsu_pops = {
+ .tx_empty = sunsu_tx_empty,
+ .set_mctrl = sunsu_set_mctrl,
+ .get_mctrl = sunsu_get_mctrl,
+ .stop_tx = sunsu_stop_tx,
+ .start_tx = sunsu_start_tx,
+ .stop_rx = sunsu_stop_rx,
+ .enable_ms = sunsu_enable_ms,
+ .break_ctl = sunsu_break_ctl,
+ .startup = sunsu_startup,
+ .shutdown = sunsu_shutdown,
+ .set_termios = sunsu_set_termios,
+ .type = sunsu_type,
+ .release_port = sunsu_release_port,
+ .request_port = sunsu_request_port,
+ .config_port = sunsu_config_port,
+ .verify_port = sunsu_verify_port,
+};
+
+#define UART_NR 4
+
+static struct uart_sunsu_port sunsu_ports[UART_NR];
+
+#ifdef CONFIG_SERIO
+
+static DEFINE_SPINLOCK(sunsu_serio_lock);
+
+static int sunsu_serio_write(struct serio *serio, unsigned char ch)
+{
+ struct uart_sunsu_port *up = serio->port_data;
+ unsigned long flags;
+ int lsr;
+
+ spin_lock_irqsave(&sunsu_serio_lock, flags);
+
+ do {
+ lsr = serial_in(up, UART_LSR);
+ } while (!(lsr & UART_LSR_THRE));
+
+ /* Send the character out. */
+ serial_out(up, UART_TX, ch);
+
+ spin_unlock_irqrestore(&sunsu_serio_lock, flags);
+
+ return 0;
+}
+
+static int sunsu_serio_open(struct serio *serio)
+{
+ struct uart_sunsu_port *up = serio->port_data;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&sunsu_serio_lock, flags);
+ if (!up->serio_open) {
+ up->serio_open = 1;
+ ret = 0;
+ } else
+ ret = -EBUSY;
+ spin_unlock_irqrestore(&sunsu_serio_lock, flags);
+
+ return ret;
+}
+
+static void sunsu_serio_close(struct serio *serio)
+{
+ struct uart_sunsu_port *up = serio->port_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sunsu_serio_lock, flags);
+ up->serio_open = 0;
+ spin_unlock_irqrestore(&sunsu_serio_lock, flags);
+}
+
+#endif /* CONFIG_SERIO */
+
+static void sunsu_autoconfig(struct uart_sunsu_port *up)
+{
+ unsigned char status1, status2, scratch, scratch2, scratch3;
+ unsigned char save_lcr, save_mcr;
+ struct linux_ebus_device *dev = NULL;
+ struct linux_ebus *ebus;
+#ifdef CONFIG_SPARC64
+ struct sparc_isa_bridge *isa_br;
+ struct sparc_isa_device *isa_dev;
+#endif
+#ifndef CONFIG_SPARC64
+ struct linux_prom_registers reg0;
+#endif
+ unsigned long flags;
+
+ if (!up->port_node || !up->su_type)
+ return;
+
+ up->type_probed = PORT_UNKNOWN;
+ up->port.iotype = SERIAL_IO_MEM;
+
+ /*
+ * First we look for Ebus-bases su's
+ */
+ for_each_ebus(ebus) {
+ for_each_ebusdev(dev, ebus) {
+ if (dev->prom_node == up->port_node) {
+ /*
+ * The EBus is broken on sparc; it delivers
+ * virtual addresses in resources. Oh well...
+ * This is correct on sparc64, though.
+ */
+ up->port.membase = (char *) dev->resource[0].start;
+ /*
+ * This is correct on both architectures.
+ */
+ up->port.mapbase = dev->resource[0].start;
+ up->port.irq = dev->irqs[0];
+ goto ebus_done;
+ }
+ }
+ }
+
+#ifdef CONFIG_SPARC64
+ for_each_isa(isa_br) {
+ for_each_isadev(isa_dev, isa_br) {
+ if (isa_dev->prom_node == up->port_node) {
+ /* Same on sparc64. Cool architecure... */
+ up->port.membase = (char *) isa_dev->resource.start;
+ up->port.mapbase = isa_dev->resource.start;
+ up->port.irq = isa_dev->irq;
+ goto ebus_done;
+ }
+ }
+ }
+#endif
+
+#ifdef CONFIG_SPARC64
+ /*
+ * Not on Ebus, bailing.
+ */
+ return;
+#else
+ /*
+ * Not on Ebus, must be OBIO.
+ */
+ if (prom_getproperty(up->port_node, "reg",
+ (char *)&reg0, sizeof(reg0)) == -1) {
+ prom_printf("sunsu: no \"reg\" property\n");
+ return;
+ }
+ prom_apply_obio_ranges(&reg0, 1);
+ if (reg0.which_io != 0) { /* Just in case... */
+ prom_printf("sunsu: bus number nonzero: 0x%x:%x\n",
+ reg0.which_io, reg0.phys_addr);
+ return;
+ }
+ up->port.mapbase = reg0.phys_addr;
+ if ((up->port.membase = ioremap(reg0.phys_addr, reg0.reg_size)) == 0) {
+ prom_printf("sunsu: Cannot map registers.\n");
+ return;
+ }
+
+ /*
+ * 0x20 is sun4m thing, Dave Redman heritage.
+ * See arch/sparc/kernel/irq.c.
+ */
+#define IRQ_4M(n) ((n)|0x20)
+
+ /*
+ * There is no intr property on MrCoffee, so hardwire it.
+ */
+ up->port.irq = IRQ_4M(13);
+#endif
+
+ebus_done:
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ if (!(up->port.flags & ASYNC_BUGGY_UART)) {
+ /*
+ * Do a simple existence test first; if we fail this, there's
+ * no point trying anything else.
+ *
+ * 0x80 is used as a nonsense port to prevent against false
+ * positives due to ISA bus float. The assumption is that
+ * 0x80 is a non-existent port; which should be safe since
+ * include/asm/io.h also makes this assumption.
+ */
+ scratch = serial_inp(up, UART_IER);
+ serial_outp(up, UART_IER, 0);
+#ifdef __i386__
+ outb(0xff, 0x080);
+#endif
+ scratch2 = serial_inp(up, UART_IER);
+ serial_outp(up, UART_IER, 0x0f);
+#ifdef __i386__
+ outb(0, 0x080);
+#endif
+ scratch3 = serial_inp(up, UART_IER);
+ serial_outp(up, UART_IER, scratch);
+ if (scratch2 != 0 || scratch3 != 0x0F)
+ goto out; /* We failed; there's nothing here */
+ }
+
+ save_mcr = serial_in(up, UART_MCR);
+ save_lcr = serial_in(up, UART_LCR);
+
+ /*
+ * Check to see if a UART is really there. Certain broken
+ * internal modems based on the Rockwell chipset fail this
+ * test, because they apparently don't implement the loopback
+ * test mode. So this test is skipped on the COM 1 through
+ * COM 4 ports. This *should* be safe, since no board
+ * manufacturer would be stupid enough to design a board
+ * that conflicts with COM 1-4 --- we hope!
+ */
+ if (!(up->port.flags & ASYNC_SKIP_TEST)) {
+ serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A);
+ status1 = serial_inp(up, UART_MSR) & 0xF0;
+ serial_outp(up, UART_MCR, save_mcr);
+ if (status1 != 0x90)
+ goto out; /* We failed loopback test */
+ }
+ serial_outp(up, UART_LCR, 0xBF); /* set up for StarTech test */
+ serial_outp(up, UART_EFR, 0); /* EFR is the same as FCR */
+ serial_outp(up, UART_LCR, 0);
+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+ scratch = serial_in(up, UART_IIR) >> 6;
+ switch (scratch) {
+ case 0:
+ up->port.type = PORT_16450;
+ break;
+ case 1:
+ up->port.type = PORT_UNKNOWN;
+ break;
+ case 2:
+ up->port.type = PORT_16550;
+ break;
+ case 3:
+ up->port.type = PORT_16550A;
+ break;
+ }
+ if (up->port.type == PORT_16550A) {
+ /* Check for Startech UART's */
+ serial_outp(up, UART_LCR, UART_LCR_DLAB);
+ if (serial_in(up, UART_EFR) == 0) {
+ up->port.type = PORT_16650;
+ } else {
+ serial_outp(up, UART_LCR, 0xBF);
+ if (serial_in(up, UART_EFR) == 0)
+ up->port.type = PORT_16650V2;
+ }
+ }
+ if (up->port.type == PORT_16550A) {
+ /* Check for TI 16750 */
+ serial_outp(up, UART_LCR, save_lcr | UART_LCR_DLAB);
+ serial_outp(up, UART_FCR,
+ UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
+ scratch = serial_in(up, UART_IIR) >> 5;
+ if (scratch == 7) {
+ /*
+ * If this is a 16750, and not a cheap UART
+ * clone, then it should only go into 64 byte
+ * mode if the UART_FCR7_64BYTE bit was set
+ * while UART_LCR_DLAB was latched.
+ */
+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+ serial_outp(up, UART_LCR, 0);
+ serial_outp(up, UART_FCR,
+ UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
+ scratch = serial_in(up, UART_IIR) >> 5;
+ if (scratch == 6)
+ up->port.type = PORT_16750;
+ }
+ serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+ }
+ serial_outp(up, UART_LCR, save_lcr);
+ if (up->port.type == PORT_16450) {
+ scratch = serial_in(up, UART_SCR);
+ serial_outp(up, UART_SCR, 0xa5);
+ status1 = serial_in(up, UART_SCR);
+ serial_outp(up, UART_SCR, 0x5a);
+ status2 = serial_in(up, UART_SCR);
+ serial_outp(up, UART_SCR, scratch);
+
+ if ((status1 != 0xa5) || (status2 != 0x5a))
+ up->port.type = PORT_8250;
+ }
+
+ up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size;
+
+ if (up->port.type == PORT_UNKNOWN)
+ goto out;
+ up->type_probed = up->port.type; /* XXX */
+
+ /*
+ * Reset the UART.
+ */
+#ifdef CONFIG_SERIAL_8250_RSA
+ if (up->port.type == PORT_RSA)
+ serial_outp(up, UART_RSA_FRR, 0);
+#endif
+ serial_outp(up, UART_MCR, save_mcr);
+ serial_outp(up, UART_FCR, (UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR |
+ UART_FCR_CLEAR_XMIT));
+ serial_outp(up, UART_FCR, 0);
+ (void)serial_in(up, UART_RX);
+ serial_outp(up, UART_IER, 0);
+
+out:
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static struct uart_driver sunsu_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "serial",
+ .devfs_name = "tts/",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+};
+
+static int __init sunsu_kbd_ms_init(struct uart_sunsu_port *up, int channel)
+{
+#ifdef CONFIG_SERIO
+ struct serio *serio;
+#endif
+
+ up->port.line = channel;
+ up->port.type = PORT_UNKNOWN;
+ up->port.uartclk = (SU_BASE_BAUD * 16);
+
+ if (up->su_type == SU_PORT_KBD)
+ up->cflag = B1200 | CS8 | CLOCAL | CREAD;
+ else
+ up->cflag = B4800 | CS8 | CLOCAL | CREAD;
+
+ sunsu_autoconfig(up);
+ if (up->port.type == PORT_UNKNOWN)
+ return -1;
+
+ printk(KERN_INFO "su%d at 0x%p (irq = %s) is a %s\n",
+ channel,
+ up->port.membase, __irq_itoa(up->port.irq),
+ sunsu_type(&up->port));
+
+#ifdef CONFIG_SERIO
+ up->serio = serio = kmalloc(sizeof(struct serio), GFP_KERNEL);
+ if (serio) {
+ memset(serio, 0, sizeof(*serio));
+
+ serio->port_data = up;
+
+ serio->id.type = SERIO_RS232;
+ if (up->su_type == SU_PORT_KBD) {
+ serio->id.proto = SERIO_SUNKBD;
+ strlcpy(serio->name, "sukbd", sizeof(serio->name));
+ } else {
+ serio->id.proto = SERIO_SUN;
+ serio->id.extra = 1;
+ strlcpy(serio->name, "sums", sizeof(serio->name));
+ }
+ strlcpy(serio->phys, (channel == 0 ? "su/serio0" : "su/serio1"),
+ sizeof(serio->phys));
+
+ serio->write = sunsu_serio_write;
+ serio->open = sunsu_serio_open;
+ serio->close = sunsu_serio_close;
+
+ serio_register_port(serio);
+ } else {
+ printk(KERN_WARNING "su%d: not enough memory for serio port\n",
+ channel);
+ }
+#endif
+
+ sunsu_startup(&up->port);
+ return 0;
+}
+
+/*
+ * ------------------------------------------------------------
+ * Serial console driver
+ * ------------------------------------------------------------
+ */
+
+#ifdef CONFIG_SERIAL_SUNSU_CONSOLE
+
+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+
+/*
+ * Wait for transmitter & holding register to empty
+ */
+static __inline__ void wait_for_xmitr(struct uart_sunsu_port *up)
+{
+ unsigned int status, tmout = 10000;
+
+ /* Wait up to 10ms for the character(s) to be sent. */
+ do {
+ status = serial_in(up, UART_LSR);
+
+ if (status & UART_LSR_BI)
+ up->lsr_break_flag = UART_LSR_BI;
+
+ if (--tmout == 0)
+ break;
+ udelay(1);
+ } while ((status & BOTH_EMPTY) != BOTH_EMPTY);
+
+ /* Wait up to 1s for flow control if necessary */
+ if (up->port.flags & ASYNC_CONS_FLOW) {
+ tmout = 1000000;
+ while (--tmout &&
+ ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
+ udelay(1);
+ }
+}
+
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ */
+static void sunsu_console_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ struct uart_sunsu_port *up = &sunsu_ports[co->index];
+ unsigned int ier;
+ int i;
+
+ /*
+ * First save the UER then disable the interrupts
+ */
+ ier = serial_in(up, UART_IER);
+ serial_out(up, UART_IER, 0);
+
+ /*
+ * Now, do each character
+ */
+ for (i = 0; i < count; i++, s++) {
+ wait_for_xmitr(up);
+
+ /*
+ * Send the character out.
+ * If a LF, also do CR...
+ */
+ serial_out(up, UART_TX, *s);
+ if (*s == 10) {
+ wait_for_xmitr(up);
+ serial_out(up, UART_TX, 13);
+ }
+ }
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the IER
+ */
+ wait_for_xmitr(up);
+ serial_out(up, UART_IER, ier);
+}
+
+/*
+ * Setup initial baud/bits/parity. We do two things here:
+ * - construct a cflag setting for the first su_open()
+ * - initialize the serial port
+ * Return non-zero if we didn't find a serial port.
+ */
+static int __init sunsu_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ printk("Console: ttyS%d (SU)\n",
+ (sunsu_reg.minor - 64) + co->index);
+
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ if (co->index >= UART_NR)
+ co->index = 0;
+ port = &sunsu_ports[co->index].port;
+
+ /*
+ * Temporary fix.
+ */
+ spin_lock_init(&port->lock);
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct console sunsu_cons = {
+ .name = "ttyS",
+ .write = sunsu_console_write,
+ .device = uart_console_device,
+ .setup = sunsu_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &sunsu_reg,
+};
+#define SUNSU_CONSOLE (&sunsu_cons)
+
+/*
+ * Register console.
+ */
+
+static int __init sunsu_serial_console_init(void)
+{
+ int i;
+
+ if (con_is_present())
+ return 0;
+
+ for (i = 0; i < UART_NR; i++) {
+ int this_minor = sunsu_reg.minor + i;
+
+ if ((this_minor - 64) == (serial_console - 1))
+ break;
+ }
+ if (i == UART_NR)
+ return 0;
+ if (sunsu_ports[i].port_node == 0)
+ return 0;
+
+ sunsu_cons.index = i;
+ register_console(&sunsu_cons);
+ return 0;
+}
+#else
+#define SUNSU_CONSOLE (NULL)
+#define sunsu_serial_console_init() do { } while (0)
+#endif
+
+static int __init sunsu_serial_init(void)
+{
+ int instance, ret, i;
+
+ /* How many instances do we need? */
+ instance = 0;
+ for (i = 0; i < UART_NR; i++) {
+ struct uart_sunsu_port *up = &sunsu_ports[i];
+
+ if (up->su_type == SU_PORT_MS ||
+ up->su_type == SU_PORT_KBD)
+ continue;
+
+ up->port.flags |= ASYNC_BOOT_AUTOCONF;
+ up->port.type = PORT_UNKNOWN;
+ up->port.uartclk = (SU_BASE_BAUD * 16);
+
+ sunsu_autoconfig(up);
+ if (up->port.type == PORT_UNKNOWN)
+ continue;
+
+ up->port.line = instance++;
+ up->port.ops = &sunsu_pops;
+ }
+
+ sunsu_reg.minor = sunserial_current_minor;
+ sunserial_current_minor += instance;
+
+ sunsu_reg.nr = instance;
+ sunsu_reg.cons = SUNSU_CONSOLE;
+
+ ret = uart_register_driver(&sunsu_reg);
+ if (ret < 0)
+ return ret;
+
+ sunsu_serial_console_init();
+ for (i = 0; i < UART_NR; i++) {
+ struct uart_sunsu_port *up = &sunsu_ports[i];
+
+ /* Do not register Keyboard/Mouse lines with UART
+ * layer.
+ */
+ if (up->su_type == SU_PORT_MS ||
+ up->su_type == SU_PORT_KBD)
+ continue;
+
+ if (up->port.type == PORT_UNKNOWN)
+ continue;
+
+ uart_add_one_port(&sunsu_reg, &up->port);
+ }
+
+ return 0;
+}
+
+static int su_node_ok(int node, char *name, int namelen)
+{
+ if (strncmp(name, "su", namelen) == 0 ||
+ strncmp(name, "su_pnp", namelen) == 0)
+ return 1;
+
+ if (strncmp(name, "serial", namelen) == 0) {
+ char compat[32];
+ int clen;
+
+ /* Is it _really_ a 'su' device? */
+ clen = prom_getproperty(node, "compatible", compat, sizeof(compat));
+ if (clen > 0) {
+ if (strncmp(compat, "sab82532", 8) == 0) {
+ /* Nope, Siemens serial, not for us. */
+ return 0;
+ }
+ }
+ return 1;
+ }
+
+ return 0;
+}
+
+#define SU_PROPSIZE 128
+
+/*
+ * Scan status structure.
+ * "prop" is a local variable but it eats stack to keep it in each
+ * stack frame of a recursive procedure.
+ */
+struct su_probe_scan {
+ int msnode, kbnode; /* PROM nodes for mouse and keyboard */
+ int msx, kbx; /* minors for mouse and keyboard */
+ int devices; /* scan index */
+ char prop[SU_PROPSIZE];
+};
+
+/*
+ * We have several platforms which present 'su' in different parts
+ * of the device tree. 'su' may be found under obio, ebus, isa and pci.
+ * We walk over the tree and find them wherever PROM hides them.
+ */
+static void __init su_probe_any(struct su_probe_scan *t, int sunode)
+{
+ struct uart_sunsu_port *up;
+ int len;
+
+ if (t->devices >= UART_NR)
+ return;
+
+ for (; sunode != 0; sunode = prom_getsibling(sunode)) {
+ len = prom_getproperty(sunode, "name", t->prop, SU_PROPSIZE);
+ if (len <= 1)
+ continue; /* Broken PROM node */
+
+ if (su_node_ok(sunode, t->prop, len)) {
+ up = &sunsu_ports[t->devices];
+ if (t->kbnode != 0 && sunode == t->kbnode) {
+ t->kbx = t->devices;
+ up->su_type = SU_PORT_KBD;
+ } else if (t->msnode != 0 && sunode == t->msnode) {
+ t->msx = t->devices;
+ up->su_type = SU_PORT_MS;
+ } else {
+#ifdef CONFIG_SPARC64
+ /*
+ * Do not attempt to use the truncated
+ * keyboard/mouse ports as serial ports
+ * on Ultras with PC keyboard attached.
+ */
+ if (prom_getbool(sunode, "mouse"))
+ continue;
+ if (prom_getbool(sunode, "keyboard"))
+ continue;
+#endif
+ up->su_type = SU_PORT_PORT;
+ }
+ up->port_node = sunode;
+ ++t->devices;
+ } else {
+ su_probe_any(t, prom_getchild(sunode));
+ }
+ }
+}
+
+static int __init sunsu_probe(void)
+{
+ int node;
+ int len;
+ struct su_probe_scan scan;
+
+ /*
+ * First, we scan the tree.
+ */
+ scan.devices = 0;
+ scan.msx = -1;
+ scan.kbx = -1;
+ scan.kbnode = 0;
+ scan.msnode = 0;
+
+ /*
+ * Get the nodes for keyboard and mouse from 'aliases'...
+ */
+ node = prom_getchild(prom_root_node);
+ node = prom_searchsiblings(node, "aliases");
+ if (node != 0) {
+ len = prom_getproperty(node, "keyboard", scan.prop, SU_PROPSIZE);
+ if (len > 0) {
+ scan.prop[len] = 0;
+ scan.kbnode = prom_finddevice(scan.prop);
+ }
+
+ len = prom_getproperty(node, "mouse", scan.prop, SU_PROPSIZE);
+ if (len > 0) {
+ scan.prop[len] = 0;
+ scan.msnode = prom_finddevice(scan.prop);
+ }
+ }
+
+ su_probe_any(&scan, prom_getchild(prom_root_node));
+
+ /*
+ * Second, we process the special case of keyboard and mouse.
+ *
+ * Currently if we got keyboard and mouse hooked to "su" ports
+ * we do not use any possible remaining "su" as a serial port.
+ * Thus, we ignore values of .msx and .kbx, then compact ports.
+ */
+ if (scan.msx != -1 && scan.kbx != -1) {
+ sunsu_ports[0].su_type = SU_PORT_MS;
+ sunsu_ports[0].port_node = scan.msnode;
+ sunsu_kbd_ms_init(&sunsu_ports[0], 0);
+
+ sunsu_ports[1].su_type = SU_PORT_KBD;
+ sunsu_ports[1].port_node = scan.kbnode;
+ sunsu_kbd_ms_init(&sunsu_ports[1], 1);
+
+ return 0;
+ }
+
+ if (scan.msx != -1 || scan.kbx != -1) {
+ printk("sunsu_probe: cannot match keyboard and mouse, confused\n");
+ return -ENODEV;
+ }
+
+ if (scan.devices == 0)
+ return -ENODEV;
+
+ /*
+ * Console must be initiated after the generic initialization.
+ */
+ sunsu_serial_init();
+
+ return 0;
+}
+
+static void __exit sunsu_exit(void)
+{
+ int i, saw_uart;
+
+ saw_uart = 0;
+ for (i = 0; i < UART_NR; i++) {
+ struct uart_sunsu_port *up = &sunsu_ports[i];
+
+ if (up->su_type == SU_PORT_MS ||
+ up->su_type == SU_PORT_KBD) {
+#ifdef CONFIG_SERIO
+ if (up->serio) {
+ serio_unregister_port(up->serio);
+ up->serio = NULL;
+ }
+#endif
+ } else if (up->port.type != PORT_UNKNOWN) {
+ uart_remove_one_port(&sunsu_reg, &up->port);
+ saw_uart++;
+ }
+ }
+
+ if (saw_uart)
+ uart_unregister_driver(&sunsu_reg);
+}
+
+module_init(sunsu_probe);
+module_exit(sunsu_exit);
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
new file mode 100644
index 00000000000..5c4231ae295
--- /dev/null
+++ b/drivers/serial/sunzilog.c
@@ -0,0 +1,1773 @@
+/*
+ * sunzilog.c
+ *
+ * Driver for Zilog serial chips found on Sun workstations and
+ * servers. This driver could actually be made more generic.
+ *
+ * This is based on the old drivers/sbus/char/zs.c code. A lot
+ * of code has been simply moved over directly from there but
+ * much has been rewritten. Credits therefore go out to Eddie
+ * C. Dost, Pete Zaitcev, Ted Ts'o and Alex Buell for their
+ * work there.
+ *
+ * Copyright (C) 2002 David S. Miller (davem@redhat.com)
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/circ_buf.h>
+#include <linux/serial.h>
+#include <linux/sysrq.h>
+#include <linux/console.h>
+#include <linux/spinlock.h>
+#ifdef CONFIG_SERIO
+#include <linux/serio.h>
+#endif
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#ifdef CONFIG_SPARC64
+#include <asm/fhc.h>
+#endif
+#include <asm/sbus.h>
+
+#if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/serial_core.h>
+
+#include "suncore.h"
+#include "sunzilog.h"
+
+/* On 32-bit sparcs we need to delay after register accesses
+ * to accommodate sun4 systems, but we do not need to flush writes.
+ * On 64-bit sparc we only need to flush single writes to ensure
+ * completion.
+ */
+#ifndef CONFIG_SPARC64
+#define ZSDELAY() udelay(5)
+#define ZSDELAY_LONG() udelay(20)
+#define ZS_WSYNC(channel) do { } while (0)
+#else
+#define ZSDELAY()
+#define ZSDELAY_LONG()
+#define ZS_WSYNC(__channel) \
+ sbus_readb(&((__channel)->control))
+#endif
+
+static int num_sunzilog;
+#define NUM_SUNZILOG num_sunzilog
+#define NUM_CHANNELS (NUM_SUNZILOG * 2)
+
+#define KEYBOARD_LINE 0x2
+#define MOUSE_LINE 0x3
+
+#define ZS_CLOCK 4915200 /* Zilog input clock rate. */
+#define ZS_CLOCK_DIVISOR 16 /* Divisor this driver uses. */
+
+/*
+ * We wrap our port structure around the generic uart_port.
+ */
+struct uart_sunzilog_port {
+ struct uart_port port;
+
+ /* IRQ servicing chain. */
+ struct uart_sunzilog_port *next;
+
+ /* Current values of Zilog write registers. */
+ unsigned char curregs[NUM_ZSREGS];
+
+ unsigned int flags;
+#define SUNZILOG_FLAG_CONS_KEYB 0x00000001
+#define SUNZILOG_FLAG_CONS_MOUSE 0x00000002
+#define SUNZILOG_FLAG_IS_CONS 0x00000004
+#define SUNZILOG_FLAG_IS_KGDB 0x00000008
+#define SUNZILOG_FLAG_MODEM_STATUS 0x00000010
+#define SUNZILOG_FLAG_IS_CHANNEL_A 0x00000020
+#define SUNZILOG_FLAG_REGS_HELD 0x00000040
+#define SUNZILOG_FLAG_TX_STOPPED 0x00000080
+#define SUNZILOG_FLAG_TX_ACTIVE 0x00000100
+
+ unsigned int cflag;
+
+ unsigned char parity_mask;
+ unsigned char prev_status;
+
+#ifdef CONFIG_SERIO
+ struct serio *serio;
+ int serio_open;
+#endif
+};
+
+#define ZILOG_CHANNEL_FROM_PORT(PORT) ((struct zilog_channel __iomem *)((PORT)->membase))
+#define UART_ZILOG(PORT) ((struct uart_sunzilog_port *)(PORT))
+
+#define ZS_IS_KEYB(UP) ((UP)->flags & SUNZILOG_FLAG_CONS_KEYB)
+#define ZS_IS_MOUSE(UP) ((UP)->flags & SUNZILOG_FLAG_CONS_MOUSE)
+#define ZS_IS_CONS(UP) ((UP)->flags & SUNZILOG_FLAG_IS_CONS)
+#define ZS_IS_KGDB(UP) ((UP)->flags & SUNZILOG_FLAG_IS_KGDB)
+#define ZS_WANTS_MODEM_STATUS(UP) ((UP)->flags & SUNZILOG_FLAG_MODEM_STATUS)
+#define ZS_IS_CHANNEL_A(UP) ((UP)->flags & SUNZILOG_FLAG_IS_CHANNEL_A)
+#define ZS_REGS_HELD(UP) ((UP)->flags & SUNZILOG_FLAG_REGS_HELD)
+#define ZS_TX_STOPPED(UP) ((UP)->flags & SUNZILOG_FLAG_TX_STOPPED)
+#define ZS_TX_ACTIVE(UP) ((UP)->flags & SUNZILOG_FLAG_TX_ACTIVE)
+
+/* Reading and writing Zilog8530 registers. The delays are to make this
+ * driver work on the Sun4 which needs a settling delay after each chip
+ * register access, other machines handle this in hardware via auxiliary
+ * flip-flops which implement the settle time we do in software.
+ *
+ * The port lock must be held and local IRQs must be disabled
+ * when {read,write}_zsreg is invoked.
+ */
+static unsigned char read_zsreg(struct zilog_channel __iomem *channel,
+ unsigned char reg)
+{
+ unsigned char retval;
+
+ sbus_writeb(reg, &channel->control);
+ ZSDELAY();
+ retval = sbus_readb(&channel->control);
+ ZSDELAY();
+
+ return retval;
+}
+
+static void write_zsreg(struct zilog_channel __iomem *channel,
+ unsigned char reg, unsigned char value)
+{
+ sbus_writeb(reg, &channel->control);
+ ZSDELAY();
+ sbus_writeb(value, &channel->control);
+ ZSDELAY();
+}
+
+static void sunzilog_clear_fifo(struct zilog_channel __iomem *channel)
+{
+ int i;
+
+ for (i = 0; i < 32; i++) {
+ unsigned char regval;
+
+ regval = sbus_readb(&channel->control);
+ ZSDELAY();
+ if (regval & Rx_CH_AV)
+ break;
+
+ regval = read_zsreg(channel, R1);
+ sbus_readb(&channel->data);
+ ZSDELAY();
+
+ if (regval & (PAR_ERR | Rx_OVR | CRC_ERR)) {
+ sbus_writeb(ERR_RES, &channel->control);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+ }
+ }
+}
+
+/* This function must only be called when the TX is not busy. The UART
+ * port lock must be held and local interrupts disabled.
+ */
+static void __load_zsregs(struct zilog_channel __iomem *channel, unsigned char *regs)
+{
+ int i;
+
+ /* Let pending transmits finish. */
+ for (i = 0; i < 1000; i++) {
+ unsigned char stat = read_zsreg(channel, R1);
+ if (stat & ALL_SNT)
+ break;
+ udelay(100);
+ }
+
+ sbus_writeb(ERR_RES, &channel->control);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+
+ sunzilog_clear_fifo(channel);
+
+ /* Disable all interrupts. */
+ write_zsreg(channel, R1,
+ regs[R1] & ~(RxINT_MASK | TxINT_ENAB | EXT_INT_ENAB));
+
+ /* Set parity, sync config, stop bits, and clock divisor. */
+ write_zsreg(channel, R4, regs[R4]);
+
+ /* Set misc. TX/RX control bits. */
+ write_zsreg(channel, R10, regs[R10]);
+
+ /* Set TX/RX controls sans the enable bits. */
+ write_zsreg(channel, R3, regs[R3] & ~RxENAB);
+ write_zsreg(channel, R5, regs[R5] & ~TxENAB);
+
+ /* Synchronous mode config. */
+ write_zsreg(channel, R6, regs[R6]);
+ write_zsreg(channel, R7, regs[R7]);
+
+ /* Don't mess with the interrupt vector (R2, unused by us) and
+ * master interrupt control (R9). We make sure this is setup
+ * properly at probe time then never touch it again.
+ */
+
+ /* Disable baud generator. */
+ write_zsreg(channel, R14, regs[R14] & ~BRENAB);
+
+ /* Clock mode control. */
+ write_zsreg(channel, R11, regs[R11]);
+
+ /* Lower and upper byte of baud rate generator divisor. */
+ write_zsreg(channel, R12, regs[R12]);
+ write_zsreg(channel, R13, regs[R13]);
+
+ /* Now rewrite R14, with BRENAB (if set). */
+ write_zsreg(channel, R14, regs[R14]);
+
+ /* External status interrupt control. */
+ write_zsreg(channel, R15, regs[R15]);
+
+ /* Reset external status interrupts. */
+ write_zsreg(channel, R0, RES_EXT_INT);
+ write_zsreg(channel, R0, RES_EXT_INT);
+
+ /* Rewrite R3/R5, this time without enables masked. */
+ write_zsreg(channel, R3, regs[R3]);
+ write_zsreg(channel, R5, regs[R5]);
+
+ /* Rewrite R1, this time without IRQ enabled masked. */
+ write_zsreg(channel, R1, regs[R1]);
+}
+
+/* Reprogram the Zilog channel HW registers with the copies found in the
+ * software state struct. If the transmitter is busy, we defer this update
+ * until the next TX complete interrupt. Else, we do it right now.
+ *
+ * The UART port lock must be held and local interrupts disabled.
+ */
+static void sunzilog_maybe_update_regs(struct uart_sunzilog_port *up,
+ struct zilog_channel __iomem *channel)
+{
+ if (!ZS_REGS_HELD(up)) {
+ if (ZS_TX_ACTIVE(up)) {
+ up->flags |= SUNZILOG_FLAG_REGS_HELD;
+ } else {
+ __load_zsregs(channel, up->curregs);
+ }
+ }
+}
+
+static void sunzilog_change_mouse_baud(struct uart_sunzilog_port *up)
+{
+ unsigned int cur_cflag = up->cflag;
+ int brg, new_baud;
+
+ up->cflag &= ~CBAUD;
+ up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud);
+
+ brg = BPS_TO_BRG(new_baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
+ up->curregs[R12] = (brg & 0xff);
+ up->curregs[R13] = (brg >> 8) & 0xff;
+ sunzilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(&up->port));
+}
+
+static void sunzilog_kbdms_receive_chars(struct uart_sunzilog_port *up,
+ unsigned char ch, int is_break,
+ struct pt_regs *regs)
+{
+ if (ZS_IS_KEYB(up)) {
+ /* Stop-A is handled by drivers/char/keyboard.c now. */
+#ifdef CONFIG_SERIO
+ if (up->serio_open)
+ serio_interrupt(up->serio, ch, 0, regs);
+#endif
+ } else if (ZS_IS_MOUSE(up)) {
+ int ret = suncore_mouse_baud_detection(ch, is_break);
+
+ switch (ret) {
+ case 2:
+ sunzilog_change_mouse_baud(up);
+ /* fallthru */
+ case 1:
+ break;
+
+ case 0:
+#ifdef CONFIG_SERIO
+ if (up->serio_open)
+ serio_interrupt(up->serio, ch, 0, regs);
+#endif
+ break;
+ };
+ }
+}
+
+static struct tty_struct *
+sunzilog_receive_chars(struct uart_sunzilog_port *up,
+ struct zilog_channel __iomem *channel,
+ struct pt_regs *regs)
+{
+ struct tty_struct *tty;
+ unsigned char ch, r1;
+
+ tty = NULL;
+ if (up->port.info != NULL && /* Unopened serial console */
+ up->port.info->tty != NULL) /* Keyboard || mouse */
+ tty = up->port.info->tty;
+
+ for (;;) {
+
+ r1 = read_zsreg(channel, R1);
+ if (r1 & (PAR_ERR | Rx_OVR | CRC_ERR)) {
+ sbus_writeb(ERR_RES, &channel->control);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+ }
+
+ ch = sbus_readb(&channel->control);
+ ZSDELAY();
+
+ /* This funny hack depends upon BRK_ABRT not interfering
+ * with the other bits we care about in R1.
+ */
+ if (ch & BRK_ABRT)
+ r1 |= BRK_ABRT;
+
+ if (!(ch & Rx_CH_AV))
+ break;
+
+ ch = sbus_readb(&channel->data);
+ ZSDELAY();
+
+ ch &= up->parity_mask;
+
+ if (unlikely(ZS_IS_KEYB(up)) || unlikely(ZS_IS_MOUSE(up))) {
+ sunzilog_kbdms_receive_chars(up, ch, 0, regs);
+ continue;
+ }
+
+ if (tty == NULL) {
+ uart_handle_sysrq_char(&up->port, ch, regs);
+ continue;
+ }
+
+ if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
+ tty->flip.work.func((void *)tty);
+ /*
+ * The 8250 bails out of the loop here,
+ * but we need to read everything, or die.
+ */
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+ continue;
+ }
+
+ /* A real serial line, record the character and status. */
+ *tty->flip.char_buf_ptr = ch;
+ *tty->flip.flag_buf_ptr = TTY_NORMAL;
+ up->port.icount.rx++;
+ if (r1 & (BRK_ABRT | PAR_ERR | Rx_OVR | CRC_ERR)) {
+ if (r1 & BRK_ABRT) {
+ r1 &= ~(PAR_ERR | CRC_ERR);
+ up->port.icount.brk++;
+ if (uart_handle_break(&up->port))
+ continue;
+ }
+ else if (r1 & PAR_ERR)
+ up->port.icount.parity++;
+ else if (r1 & CRC_ERR)
+ up->port.icount.frame++;
+ if (r1 & Rx_OVR)
+ up->port.icount.overrun++;
+ r1 &= up->port.read_status_mask;
+ if (r1 & BRK_ABRT)
+ *tty->flip.flag_buf_ptr = TTY_BREAK;
+ else if (r1 & PAR_ERR)
+ *tty->flip.flag_buf_ptr = TTY_PARITY;
+ else if (r1 & CRC_ERR)
+ *tty->flip.flag_buf_ptr = TTY_FRAME;
+ }
+ if (uart_handle_sysrq_char(&up->port, ch, regs))
+ continue;
+
+ if (up->port.ignore_status_mask == 0xff ||
+ (r1 & up->port.ignore_status_mask) == 0) {
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ tty->flip.count++;
+ }
+ if ((r1 & Rx_OVR) &&
+ tty->flip.count < TTY_FLIPBUF_SIZE) {
+ *tty->flip.flag_buf_ptr = TTY_OVERRUN;
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ tty->flip.count++;
+ }
+ }
+
+ return tty;
+}
+
+static void sunzilog_status_handle(struct uart_sunzilog_port *up,
+ struct zilog_channel __iomem *channel,
+ struct pt_regs *regs)
+{
+ unsigned char status;
+
+ status = sbus_readb(&channel->control);
+ ZSDELAY();
+
+ sbus_writeb(RES_EXT_INT, &channel->control);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+
+ if (status & BRK_ABRT) {
+ if (ZS_IS_MOUSE(up))
+ sunzilog_kbdms_receive_chars(up, 0, 1, regs);
+ if (ZS_IS_CONS(up)) {
+ /* Wait for BREAK to deassert to avoid potentially
+ * confusing the PROM.
+ */
+ while (1) {
+ status = sbus_readb(&channel->control);
+ ZSDELAY();
+ if (!(status & BRK_ABRT))
+ break;
+ }
+ sun_do_break();
+ return;
+ }
+ }
+
+ if (ZS_WANTS_MODEM_STATUS(up)) {
+ if (status & SYNC)
+ up->port.icount.dsr++;
+
+ /* The Zilog just gives us an interrupt when DCD/CTS/etc. change.
+ * But it does not tell us which bit has changed, we have to keep
+ * track of this ourselves.
+ */
+ if ((status ^ up->prev_status) ^ DCD)
+ uart_handle_dcd_change(&up->port,
+ (status & DCD));
+ if ((status ^ up->prev_status) ^ CTS)
+ uart_handle_cts_change(&up->port,
+ (status & CTS));
+
+ wake_up_interruptible(&up->port.info->delta_msr_wait);
+ }
+
+ up->prev_status = status;
+}
+
+static void sunzilog_transmit_chars(struct uart_sunzilog_port *up,
+ struct zilog_channel __iomem *channel)
+{
+ struct circ_buf *xmit;
+
+ if (ZS_IS_CONS(up)) {
+ unsigned char status = sbus_readb(&channel->control);
+ ZSDELAY();
+
+ /* TX still busy? Just wait for the next TX done interrupt.
+ *
+ * It can occur because of how we do serial console writes. It would
+ * be nice to transmit console writes just like we normally would for
+ * a TTY line. (ie. buffered and TX interrupt driven). That is not
+ * easy because console writes cannot sleep. One solution might be
+ * to poll on enough port->xmit space becomming free. -DaveM
+ */
+ if (!(status & Tx_BUF_EMP))
+ return;
+ }
+
+ up->flags &= ~SUNZILOG_FLAG_TX_ACTIVE;
+
+ if (ZS_REGS_HELD(up)) {
+ __load_zsregs(channel, up->curregs);
+ up->flags &= ~SUNZILOG_FLAG_REGS_HELD;
+ }
+
+ if (ZS_TX_STOPPED(up)) {
+ up->flags &= ~SUNZILOG_FLAG_TX_STOPPED;
+ goto ack_tx_int;
+ }
+
+ if (up->port.x_char) {
+ up->flags |= SUNZILOG_FLAG_TX_ACTIVE;
+ sbus_writeb(up->port.x_char, &channel->data);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+
+ up->port.icount.tx++;
+ up->port.x_char = 0;
+ return;
+ }
+
+ if (up->port.info == NULL)
+ goto ack_tx_int;
+ xmit = &up->port.info->xmit;
+ if (uart_circ_empty(xmit)) {
+ uart_write_wakeup(&up->port);
+ goto ack_tx_int;
+ }
+ if (uart_tx_stopped(&up->port))
+ goto ack_tx_int;
+
+ up->flags |= SUNZILOG_FLAG_TX_ACTIVE;
+ sbus_writeb(xmit->buf[xmit->tail], &channel->data);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ up->port.icount.tx++;
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+
+ return;
+
+ack_tx_int:
+ sbus_writeb(RES_Tx_P, &channel->control);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+}
+
+static irqreturn_t sunzilog_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct uart_sunzilog_port *up = dev_id;
+
+ while (up) {
+ struct zilog_channel __iomem *channel
+ = ZILOG_CHANNEL_FROM_PORT(&up->port);
+ struct tty_struct *tty;
+ unsigned char r3;
+
+ spin_lock(&up->port.lock);
+ r3 = read_zsreg(channel, R3);
+
+ /* Channel A */
+ tty = NULL;
+ if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
+ sbus_writeb(RES_H_IUS, &channel->control);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+
+ if (r3 & CHARxIP)
+ tty = sunzilog_receive_chars(up, channel, regs);
+ if (r3 & CHAEXT)
+ sunzilog_status_handle(up, channel, regs);
+ if (r3 & CHATxIP)
+ sunzilog_transmit_chars(up, channel);
+ }
+ spin_unlock(&up->port.lock);
+
+ if (tty)
+ tty_flip_buffer_push(tty);
+
+ /* Channel B */
+ up = up->next;
+ channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
+
+ spin_lock(&up->port.lock);
+ tty = NULL;
+ if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
+ sbus_writeb(RES_H_IUS, &channel->control);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+
+ if (r3 & CHBRxIP)
+ tty = sunzilog_receive_chars(up, channel, regs);
+ if (r3 & CHBEXT)
+ sunzilog_status_handle(up, channel, regs);
+ if (r3 & CHBTxIP)
+ sunzilog_transmit_chars(up, channel);
+ }
+ spin_unlock(&up->port.lock);
+
+ if (tty)
+ tty_flip_buffer_push(tty);
+
+ up = up->next;
+ }
+
+ return IRQ_HANDLED;
+}
+
+/* A convenient way to quickly get R0 status. The caller must _not_ hold the
+ * port lock, it is acquired here.
+ */
+static __inline__ unsigned char sunzilog_read_channel_status(struct uart_port *port)
+{
+ struct zilog_channel __iomem *channel;
+ unsigned long flags;
+ unsigned char status;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ channel = ZILOG_CHANNEL_FROM_PORT(port);
+ status = sbus_readb(&channel->control);
+ ZSDELAY();
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return status;
+}
+
+/* The port lock is not held. */
+static unsigned int sunzilog_tx_empty(struct uart_port *port)
+{
+ unsigned char status;
+ unsigned int ret;
+
+ status = sunzilog_read_channel_status(port);
+ if (status & Tx_BUF_EMP)
+ ret = TIOCSER_TEMT;
+ else
+ ret = 0;
+
+ return ret;
+}
+
+/* The port lock is not held. */
+static unsigned int sunzilog_get_mctrl(struct uart_port *port)
+{
+ unsigned char status;
+ unsigned int ret;
+
+ status = sunzilog_read_channel_status(port);
+
+ ret = 0;
+ if (status & DCD)
+ ret |= TIOCM_CAR;
+ if (status & SYNC)
+ ret |= TIOCM_DSR;
+ if (status & CTS)
+ ret |= TIOCM_CTS;
+
+ return ret;
+}
+
+/* The port lock is held and interrupts are disabled. */
+static void sunzilog_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
+ struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
+ unsigned char set_bits, clear_bits;
+
+ set_bits = clear_bits = 0;
+
+ if (mctrl & TIOCM_RTS)
+ set_bits |= RTS;
+ else
+ clear_bits |= RTS;
+ if (mctrl & TIOCM_DTR)
+ set_bits |= DTR;
+ else
+ clear_bits |= DTR;
+
+ /* NOTE: Not subject to 'transmitter active' rule. */
+ up->curregs[R5] |= set_bits;
+ up->curregs[R5] &= ~clear_bits;
+ write_zsreg(channel, R5, up->curregs[R5]);
+}
+
+/* The port lock is held and interrupts are disabled. */
+static void sunzilog_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
+
+ up->flags |= SUNZILOG_FLAG_TX_STOPPED;
+}
+
+/* The port lock is held and interrupts are disabled. */
+static void sunzilog_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+ struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
+ struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
+ unsigned char status;
+
+ up->flags |= SUNZILOG_FLAG_TX_ACTIVE;
+ up->flags &= ~SUNZILOG_FLAG_TX_STOPPED;
+
+ status = sbus_readb(&channel->control);
+ ZSDELAY();
+
+ /* TX busy? Just wait for the TX done interrupt. */
+ if (!(status & Tx_BUF_EMP))
+ return;
+
+ /* Send the first character to jump-start the TX done
+ * IRQ sending engine.
+ */
+ if (port->x_char) {
+ sbus_writeb(port->x_char, &channel->data);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+
+ port->icount.tx++;
+ port->x_char = 0;
+ } else {
+ struct circ_buf *xmit = &port->info->xmit;
+
+ sbus_writeb(xmit->buf[xmit->tail], &channel->data);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&up->port);
+ }
+}
+
+/* The port lock is held. */
+static void sunzilog_stop_rx(struct uart_port *port)
+{
+ struct uart_sunzilog_port *up = UART_ZILOG(port);
+ struct zilog_channel __iomem *channel;
+
+ if (ZS_IS_CONS(up))
+ return;
+
+ channel = ZILOG_CHANNEL_FROM_PORT(port);
+
+ /* Disable all RX interrupts. */
+ up->curregs[R1] &= ~RxINT_MASK;
+ sunzilog_maybe_update_regs(up, channel);
+}
+
+/* The port lock is held. */
+static void sunzilog_enable_ms(struct uart_port *port)
+{
+ struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
+ struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
+ unsigned char new_reg;
+
+ new_reg = up->curregs[R15] | (DCDIE | SYNCIE | CTSIE);
+ if (new_reg != up->curregs[R15]) {
+ up->curregs[R15] = new_reg;
+
+ /* NOTE: Not subject to 'transmitter active' rule. */
+ write_zsreg(channel, R15, up->curregs[R15]);
+ }
+}
+
+/* The port lock is not held. */
+static void sunzilog_break_ctl(struct uart_port *port, int break_state)
+{
+ struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
+ struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
+ unsigned char set_bits, clear_bits, new_reg;
+ unsigned long flags;
+
+ set_bits = clear_bits = 0;
+
+ if (break_state)
+ set_bits |= SND_BRK;
+ else
+ clear_bits |= SND_BRK;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ new_reg = (up->curregs[R5] | set_bits) & ~clear_bits;
+ if (new_reg != up->curregs[R5]) {
+ up->curregs[R5] = new_reg;
+
+ /* NOTE: Not subject to 'transmitter active' rule. */
+ write_zsreg(channel, R5, up->curregs[R5]);
+ }
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void __sunzilog_startup(struct uart_sunzilog_port *up)
+{
+ struct zilog_channel __iomem *channel;
+
+ channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
+ up->prev_status = sbus_readb(&channel->control);
+
+ /* Enable receiver and transmitter. */
+ up->curregs[R3] |= RxENAB;
+ up->curregs[R5] |= TxENAB;
+
+ up->curregs[R1] |= EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB;
+ sunzilog_maybe_update_regs(up, channel);
+}
+
+static int sunzilog_startup(struct uart_port *port)
+{
+ struct uart_sunzilog_port *up = UART_ZILOG(port);
+ unsigned long flags;
+
+ if (ZS_IS_CONS(up))
+ return 0;
+
+ spin_lock_irqsave(&port->lock, flags);
+ __sunzilog_startup(up);
+ spin_unlock_irqrestore(&port->lock, flags);
+ return 0;
+}
+
+/*
+ * The test for ZS_IS_CONS is explained by the following e-mail:
+ *****
+ * From: Russell King <rmk@arm.linux.org.uk>
+ * Date: Sun, 8 Dec 2002 10:18:38 +0000
+ *
+ * On Sun, Dec 08, 2002 at 02:43:36AM -0500, Pete Zaitcev wrote:
+ * > I boot my 2.5 boxes using "console=ttyS0,9600" argument,
+ * > and I noticed that something is not right with reference
+ * > counting in this case. It seems that when the console
+ * > is open by kernel initially, this is not accounted
+ * > as an open, and uart_startup is not called.
+ *
+ * That is correct. We are unable to call uart_startup when the serial
+ * console is initialised because it may need to allocate memory (as
+ * request_irq does) and the memory allocators may not have been
+ * initialised.
+ *
+ * 1. initialise the port into a state where it can send characters in the
+ * console write method.
+ *
+ * 2. don't do the actual hardware shutdown in your shutdown() method (but
+ * do the normal software shutdown - ie, free irqs etc)
+ *****
+ */
+static void sunzilog_shutdown(struct uart_port *port)
+{
+ struct uart_sunzilog_port *up = UART_ZILOG(port);
+ struct zilog_channel __iomem *channel;
+ unsigned long flags;
+
+ if (ZS_IS_CONS(up))
+ return;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ channel = ZILOG_CHANNEL_FROM_PORT(port);
+
+ /* Disable receiver and transmitter. */
+ up->curregs[R3] &= ~RxENAB;
+ up->curregs[R5] &= ~TxENAB;
+
+ /* Disable all interrupts and BRK assertion. */
+ up->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
+ up->curregs[R5] &= ~SND_BRK;
+ sunzilog_maybe_update_regs(up, channel);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/* Shared by TTY driver and serial console setup. The port lock is held
+ * and local interrupts are disabled.
+ */
+static void
+sunzilog_convert_to_zs(struct uart_sunzilog_port *up, unsigned int cflag,
+ unsigned int iflag, int brg)
+{
+
+ up->curregs[R10] = NRZ;
+ up->curregs[R11] = TCBR | RCBR;
+
+ /* Program BAUD and clock source. */
+ up->curregs[R4] &= ~XCLK_MASK;
+ up->curregs[R4] |= X16CLK;
+ up->curregs[R12] = brg & 0xff;
+ up->curregs[R13] = (brg >> 8) & 0xff;
+ up->curregs[R14] = BRSRC | BRENAB;
+
+ /* Character size, stop bits, and parity. */
+ up->curregs[3] &= ~RxN_MASK;
+ up->curregs[5] &= ~TxN_MASK;
+ switch (cflag & CSIZE) {
+ case CS5:
+ up->curregs[3] |= Rx5;
+ up->curregs[5] |= Tx5;
+ up->parity_mask = 0x1f;
+ break;
+ case CS6:
+ up->curregs[3] |= Rx6;
+ up->curregs[5] |= Tx6;
+ up->parity_mask = 0x3f;
+ break;
+ case CS7:
+ up->curregs[3] |= Rx7;
+ up->curregs[5] |= Tx7;
+ up->parity_mask = 0x7f;
+ break;
+ case CS8:
+ default:
+ up->curregs[3] |= Rx8;
+ up->curregs[5] |= Tx8;
+ up->parity_mask = 0xff;
+ break;
+ };
+ up->curregs[4] &= ~0x0c;
+ if (cflag & CSTOPB)
+ up->curregs[4] |= SB2;
+ else
+ up->curregs[4] |= SB1;
+ if (cflag & PARENB)
+ up->curregs[4] |= PAR_ENAB;
+ else
+ up->curregs[4] &= ~PAR_ENAB;
+ if (!(cflag & PARODD))
+ up->curregs[4] |= PAR_EVEN;
+ else
+ up->curregs[4] &= ~PAR_EVEN;
+
+ up->port.read_status_mask = Rx_OVR;
+ if (iflag & INPCK)
+ up->port.read_status_mask |= CRC_ERR | PAR_ERR;
+ if (iflag & (BRKINT | PARMRK))
+ up->port.read_status_mask |= BRK_ABRT;
+
+ up->port.ignore_status_mask = 0;
+ if (iflag & IGNPAR)
+ up->port.ignore_status_mask |= CRC_ERR | PAR_ERR;
+ if (iflag & IGNBRK) {
+ up->port.ignore_status_mask |= BRK_ABRT;
+ if (iflag & IGNPAR)
+ up->port.ignore_status_mask |= Rx_OVR;
+ }
+
+ if ((cflag & CREAD) == 0)
+ up->port.ignore_status_mask = 0xff;
+}
+
+/* The port lock is not held. */
+static void
+sunzilog_set_termios(struct uart_port *port, struct termios *termios,
+ struct termios *old)
+{
+ struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
+ unsigned long flags;
+ int baud, brg;
+
+ baud = uart_get_baud_rate(port, termios, old, 1200, 76800);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
+
+ sunzilog_convert_to_zs(up, termios->c_cflag, termios->c_iflag, brg);
+
+ if (UART_ENABLE_MS(&up->port, termios->c_cflag))
+ up->flags |= SUNZILOG_FLAG_MODEM_STATUS;
+ else
+ up->flags &= ~SUNZILOG_FLAG_MODEM_STATUS;
+
+ up->cflag = termios->c_cflag;
+
+ sunzilog_maybe_update_regs(up, ZILOG_CHANNEL_FROM_PORT(port));
+
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static const char *sunzilog_type(struct uart_port *port)
+{
+ return "SunZilog";
+}
+
+/* We do not request/release mappings of the registers here, this
+ * happens at early serial probe time.
+ */
+static void sunzilog_release_port(struct uart_port *port)
+{
+}
+
+static int sunzilog_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+/* These do not need to do anything interesting either. */
+static void sunzilog_config_port(struct uart_port *port, int flags)
+{
+}
+
+/* We do not support letting the user mess with the divisor, IRQ, etc. */
+static int sunzilog_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ return -EINVAL;
+}
+
+static struct uart_ops sunzilog_pops = {
+ .tx_empty = sunzilog_tx_empty,
+ .set_mctrl = sunzilog_set_mctrl,
+ .get_mctrl = sunzilog_get_mctrl,
+ .stop_tx = sunzilog_stop_tx,
+ .start_tx = sunzilog_start_tx,
+ .stop_rx = sunzilog_stop_rx,
+ .enable_ms = sunzilog_enable_ms,
+ .break_ctl = sunzilog_break_ctl,
+ .startup = sunzilog_startup,
+ .shutdown = sunzilog_shutdown,
+ .set_termios = sunzilog_set_termios,
+ .type = sunzilog_type,
+ .release_port = sunzilog_release_port,
+ .request_port = sunzilog_request_port,
+ .config_port = sunzilog_config_port,
+ .verify_port = sunzilog_verify_port,
+};
+
+static struct uart_sunzilog_port *sunzilog_port_table;
+static struct zilog_layout __iomem **sunzilog_chip_regs;
+
+static struct uart_sunzilog_port *sunzilog_irq_chain;
+static int zilog_irq = -1;
+
+static struct uart_driver sunzilog_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "ttyS",
+ .devfs_name = "tts/",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+};
+
+static void * __init alloc_one_table(unsigned long size)
+{
+ void *ret;
+
+ ret = kmalloc(size, GFP_KERNEL);
+ if (ret != NULL)
+ memset(ret, 0, size);
+
+ return ret;
+}
+
+static void __init sunzilog_alloc_tables(void)
+{
+ sunzilog_port_table =
+ alloc_one_table(NUM_CHANNELS * sizeof(struct uart_sunzilog_port));
+ sunzilog_chip_regs =
+ alloc_one_table(NUM_SUNZILOG * sizeof(struct zilog_layout __iomem *));
+
+ if (sunzilog_port_table == NULL || sunzilog_chip_regs == NULL) {
+ prom_printf("SunZilog: Cannot allocate tables.\n");
+ prom_halt();
+ }
+}
+
+#ifdef CONFIG_SPARC64
+
+/* We used to attempt to use the address property of the Zilog device node
+ * but that totally is not necessary on sparc64.
+ */
+static struct zilog_layout __iomem * __init get_zs_sun4u(int chip, int zsnode)
+{
+ unsigned long mapped_addr;
+ unsigned int sun4u_ino;
+ struct sbus_bus *sbus = NULL;
+ struct sbus_dev *sdev = NULL;
+ int err;
+
+ if (central_bus == NULL) {
+ for_each_sbus(sbus) {
+ for_each_sbusdev(sdev, sbus) {
+ if (sdev->prom_node == zsnode)
+ goto found;
+ }
+ }
+ }
+ found:
+ if (sdev == NULL && central_bus == NULL) {
+ prom_printf("SunZilog: sdev&&central == NULL for "
+ "Zilog %d in get_zs_sun4u.\n", chip);
+ prom_halt();
+ }
+ if (central_bus == NULL) {
+ mapped_addr =
+ sbus_ioremap(&sdev->resource[0], 0,
+ PAGE_SIZE,
+ "Zilog Registers");
+ } else {
+ struct linux_prom_registers zsregs[1];
+
+ err = prom_getproperty(zsnode, "reg",
+ (char *) &zsregs[0],
+ sizeof(zsregs));
+ if (err == -1) {
+ prom_printf("SunZilog: Cannot map "
+ "Zilog %d regs on "
+ "central bus.\n", chip);
+ prom_halt();
+ }
+ apply_fhc_ranges(central_bus->child,
+ &zsregs[0], 1);
+ apply_central_ranges(central_bus, &zsregs[0], 1);
+ mapped_addr =
+ (((u64)zsregs[0].which_io)<<32UL) |
+ ((u64)zsregs[0].phys_addr);
+ }
+
+ if (zilog_irq == -1) {
+ if (central_bus) {
+ unsigned long iclr, imap;
+
+ iclr = central_bus->child->fhc_regs.uregs
+ + FHC_UREGS_ICLR;
+ imap = central_bus->child->fhc_regs.uregs
+ + FHC_UREGS_IMAP;
+ zilog_irq = build_irq(12, 0, iclr, imap);
+ } else {
+ err = prom_getproperty(zsnode, "interrupts",
+ (char *) &sun4u_ino,
+ sizeof(sun4u_ino));
+ zilog_irq = sbus_build_irq(sbus_root, sun4u_ino);
+ }
+ }
+
+ return (struct zilog_layout __iomem *) mapped_addr;
+}
+#else /* CONFIG_SPARC64 */
+
+/*
+ * XXX The sun4d case is utterly screwed: it tries to re-walk the tree
+ * (for the 3rd time) in order to find bootbus and cpu. Streamline it.
+ */
+static struct zilog_layout __iomem * __init get_zs_sun4cmd(int chip, int node)
+{
+ struct linux_prom_irqs irq_info[2];
+ void __iomem *mapped_addr = NULL;
+ int zsnode, cpunode, bbnode;
+ struct linux_prom_registers zsreg[4];
+ struct resource res;
+
+ if (sparc_cpu_model == sun4d) {
+ int walk;
+
+ zsnode = 0;
+ bbnode = 0;
+ cpunode = 0;
+ for (walk = prom_getchild(prom_root_node);
+ (walk = prom_searchsiblings(walk, "cpu-unit")) != 0;
+ walk = prom_getsibling(walk)) {
+ bbnode = prom_getchild(walk);
+ if (bbnode &&
+ (bbnode = prom_searchsiblings(bbnode, "bootbus"))) {
+ if ((zsnode = prom_getchild(bbnode)) == node) {
+ cpunode = walk;
+ break;
+ }
+ }
+ }
+ if (!walk) {
+ prom_printf("SunZilog: Cannot find the %d'th bootbus on sun4d.\n",
+ (chip / 2));
+ prom_halt();
+ }
+
+ if (prom_getproperty(zsnode, "reg",
+ (char *) zsreg, sizeof(zsreg)) == -1) {
+ prom_printf("SunZilog: Cannot map Zilog %d\n", chip);
+ prom_halt();
+ }
+ /* XXX Looks like an off by one? */
+ prom_apply_generic_ranges(bbnode, cpunode, zsreg, 1);
+ res.start = zsreg[0].phys_addr;
+ res.end = res.start + (8 - 1);
+ res.flags = zsreg[0].which_io | IORESOURCE_IO;
+ mapped_addr = sbus_ioremap(&res, 0, 8, "Zilog Serial");
+
+ } else {
+ zsnode = node;
+
+#if 0 /* XXX When was this used? */
+ if (prom_getintdefault(zsnode, "slave", -1) != chipid) {
+ zsnode = prom_getsibling(zsnode);
+ continue;
+ }
+#endif
+
+ /*
+ * "address" is only present on ports that OBP opened
+ * (from Mitch Bradley's "Hitchhiker's Guide to OBP").
+ * We do not use it.
+ */
+
+ if (prom_getproperty(zsnode, "reg",
+ (char *) zsreg, sizeof(zsreg)) == -1) {
+ prom_printf("SunZilog: Cannot map Zilog %d\n", chip);
+ prom_halt();
+ }
+ if (sparc_cpu_model == sun4m) /* Crude. Pass parent. XXX */
+ prom_apply_obio_ranges(zsreg, 1);
+ res.start = zsreg[0].phys_addr;
+ res.end = res.start + (8 - 1);
+ res.flags = zsreg[0].which_io | IORESOURCE_IO;
+ mapped_addr = sbus_ioremap(&res, 0, 8, "Zilog Serial");
+ }
+
+ if (prom_getproperty(zsnode, "intr",
+ (char *) irq_info, sizeof(irq_info))
+ % sizeof(struct linux_prom_irqs)) {
+ prom_printf("SunZilog: Cannot get IRQ property for Zilog %d.\n",
+ chip);
+ prom_halt();
+ }
+ if (zilog_irq == -1) {
+ zilog_irq = irq_info[0].pri;
+ } else if (zilog_irq != irq_info[0].pri) {
+ /* XXX. Dumb. Should handle per-chip IRQ, for add-ons. */
+ prom_printf("SunZilog: Inconsistent IRQ layout for Zilog %d.\n",
+ chip);
+ prom_halt();
+ }
+
+ return (struct zilog_layout __iomem *) mapped_addr;
+}
+#endif /* !(CONFIG_SPARC64) */
+
+/* Get the address of the registers for SunZilog instance CHIP. */
+static struct zilog_layout __iomem * __init get_zs(int chip, int node)
+{
+ if (chip < 0 || chip >= NUM_SUNZILOG) {
+ prom_printf("SunZilog: Illegal chip number %d in get_zs.\n", chip);
+ prom_halt();
+ }
+
+#ifdef CONFIG_SPARC64
+ return get_zs_sun4u(chip, node);
+#else
+
+ if (sparc_cpu_model == sun4) {
+ struct resource res;
+
+ /* Not probe-able, hard code it. */
+ switch (chip) {
+ case 0:
+ res.start = 0xf1000000;
+ break;
+ case 1:
+ res.start = 0xf0000000;
+ break;
+ };
+ zilog_irq = 12;
+ res.end = (res.start + (8 - 1));
+ res.flags = IORESOURCE_IO;
+ return sbus_ioremap(&res, 0, 8, "SunZilog");
+ }
+
+ return get_zs_sun4cmd(chip, node);
+#endif
+}
+
+#define ZS_PUT_CHAR_MAX_DELAY 2000 /* 10 ms */
+
+static void sunzilog_put_char(struct zilog_channel __iomem *channel, unsigned char ch)
+{
+ int loops = ZS_PUT_CHAR_MAX_DELAY;
+
+ /* This is a timed polling loop so do not switch the explicit
+ * udelay with ZSDELAY as that is a NOP on some platforms. -DaveM
+ */
+ do {
+ unsigned char val = sbus_readb(&channel->control);
+ if (val & Tx_BUF_EMP) {
+ ZSDELAY();
+ break;
+ }
+ udelay(5);
+ } while (--loops);
+
+ sbus_writeb(ch, &channel->data);
+ ZSDELAY();
+ ZS_WSYNC(channel);
+}
+
+#ifdef CONFIG_SERIO
+
+static DEFINE_SPINLOCK(sunzilog_serio_lock);
+
+static int sunzilog_serio_write(struct serio *serio, unsigned char ch)
+{
+ struct uart_sunzilog_port *up = serio->port_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sunzilog_serio_lock, flags);
+
+ sunzilog_put_char(ZILOG_CHANNEL_FROM_PORT(&up->port), ch);
+
+ spin_unlock_irqrestore(&sunzilog_serio_lock, flags);
+
+ return 0;
+}
+
+static int sunzilog_serio_open(struct serio *serio)
+{
+ struct uart_sunzilog_port *up = serio->port_data;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&sunzilog_serio_lock, flags);
+ if (!up->serio_open) {
+ up->serio_open = 1;
+ ret = 0;
+ } else
+ ret = -EBUSY;
+ spin_unlock_irqrestore(&sunzilog_serio_lock, flags);
+
+ return ret;
+}
+
+static void sunzilog_serio_close(struct serio *serio)
+{
+ struct uart_sunzilog_port *up = serio->port_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sunzilog_serio_lock, flags);
+ up->serio_open = 0;
+ spin_unlock_irqrestore(&sunzilog_serio_lock, flags);
+}
+
+#endif /* CONFIG_SERIO */
+
+#ifdef CONFIG_SERIAL_SUNZILOG_CONSOLE
+static void
+sunzilog_console_write(struct console *con, const char *s, unsigned int count)
+{
+ struct uart_sunzilog_port *up = &sunzilog_port_table[con->index];
+ struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+ for (i = 0; i < count; i++, s++) {
+ sunzilog_put_char(channel, *s);
+ if (*s == 10)
+ sunzilog_put_char(channel, 13);
+ }
+ udelay(2);
+ spin_unlock_irqrestore(&up->port.lock, flags);
+}
+
+static int __init sunzilog_console_setup(struct console *con, char *options)
+{
+ struct uart_sunzilog_port *up = &sunzilog_port_table[con->index];
+ unsigned long flags;
+ int baud, brg;
+
+ printk(KERN_INFO "Console: ttyS%d (SunZilog zs%d)\n",
+ (sunzilog_reg.minor - 64) + con->index, con->index);
+
+ /* Get firmware console settings. */
+ sunserial_console_termios(con);
+
+ /* Firmware console speed is limited to 150-->38400 baud so
+ * this hackish cflag thing is OK.
+ */
+ switch (con->cflag & CBAUD) {
+ case B150: baud = 150; break;
+ case B300: baud = 300; break;
+ case B600: baud = 600; break;
+ case B1200: baud = 1200; break;
+ case B2400: baud = 2400; break;
+ case B4800: baud = 4800; break;
+ default: case B9600: baud = 9600; break;
+ case B19200: baud = 19200; break;
+ case B38400: baud = 38400; break;
+ };
+
+ brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ up->curregs[R15] = BRKIE;
+ sunzilog_convert_to_zs(up, con->cflag, 0, brg);
+
+ sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
+ __sunzilog_startup(up);
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+ return 0;
+}
+
+static struct console sunzilog_console = {
+ .name = "ttyS",
+ .write = sunzilog_console_write,
+ .device = uart_console_device,
+ .setup = sunzilog_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &sunzilog_reg,
+};
+#define SUNZILOG_CONSOLE (&sunzilog_console)
+
+static int __init sunzilog_console_init(void)
+{
+ int i;
+
+ if (con_is_present())
+ return 0;
+
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ int this_minor = sunzilog_reg.minor + i;
+
+ if ((this_minor - 64) == (serial_console - 1))
+ break;
+ }
+ if (i == NUM_CHANNELS)
+ return 0;
+
+ sunzilog_console.index = i;
+ sunzilog_port_table[i].flags |= SUNZILOG_FLAG_IS_CONS;
+ register_console(&sunzilog_console);
+ return 0;
+}
+#else
+#define SUNZILOG_CONSOLE (NULL)
+#define sunzilog_console_init() do { } while (0)
+#endif
+
+/*
+ * We scan the PROM tree recursively. This is the most reliable way
+ * to find Zilog nodes on various platforms. However, we face an extreme
+ * shortage of kernel stack, so we must be very careful. To that end,
+ * we scan only to a certain depth, and we use a common property buffer
+ * in the scan structure.
+ */
+#define ZS_PROPSIZE 128
+#define ZS_SCAN_DEPTH 5
+
+struct zs_probe_scan {
+ int depth;
+ void (*scanner)(struct zs_probe_scan *t, int node);
+
+ int devices;
+ char prop[ZS_PROPSIZE];
+};
+
+static int __inline__ sunzilog_node_ok(int node, const char *name, int len)
+{
+ if (strncmp(name, "zs", len) == 0)
+ return 1;
+ /* Don't fold this procedure just yet. Compare to su_node_ok(). */
+ return 0;
+}
+
+static void __init sunzilog_scan(struct zs_probe_scan *t, int node)
+{
+ int len;
+
+ for (; node != 0; node = prom_getsibling(node)) {
+ len = prom_getproperty(node, "name", t->prop, ZS_PROPSIZE);
+ if (len <= 1)
+ continue; /* Broken PROM node */
+ if (sunzilog_node_ok(node, t->prop, len)) {
+ (*t->scanner)(t, node);
+ } else {
+ if (t->depth < ZS_SCAN_DEPTH) {
+ t->depth++;
+ sunzilog_scan(t, prom_getchild(node));
+ --t->depth;
+ }
+ }
+ }
+}
+
+static void __init sunzilog_prepare(void)
+{
+ struct uart_sunzilog_port *up;
+ struct zilog_layout __iomem *rp;
+ int channel, chip;
+
+ /*
+ * Temporary fix.
+ */
+ for (channel = 0; channel < NUM_CHANNELS; channel++)
+ spin_lock_init(&sunzilog_port_table[channel].port.lock);
+
+ sunzilog_irq_chain = up = &sunzilog_port_table[0];
+ for (channel = 0; channel < NUM_CHANNELS - 1; channel++)
+ up[channel].next = &up[channel + 1];
+ up[channel].next = NULL;
+
+ for (chip = 0; chip < NUM_SUNZILOG; chip++) {
+ rp = sunzilog_chip_regs[chip];
+ up[(chip * 2) + 0].port.membase = (void __iomem *)&rp->channelA;
+ up[(chip * 2) + 1].port.membase = (void __iomem *)&rp->channelB;
+
+ /* Channel A */
+ up[(chip * 2) + 0].port.iotype = SERIAL_IO_MEM;
+ up[(chip * 2) + 0].port.irq = zilog_irq;
+ up[(chip * 2) + 0].port.uartclk = ZS_CLOCK;
+ up[(chip * 2) + 0].port.fifosize = 1;
+ up[(chip * 2) + 0].port.ops = &sunzilog_pops;
+ up[(chip * 2) + 0].port.type = PORT_SUNZILOG;
+ up[(chip * 2) + 0].port.flags = 0;
+ up[(chip * 2) + 0].port.line = (chip * 2) + 0;
+ up[(chip * 2) + 0].flags |= SUNZILOG_FLAG_IS_CHANNEL_A;
+
+ /* Channel B */
+ up[(chip * 2) + 1].port.iotype = SERIAL_IO_MEM;
+ up[(chip * 2) + 1].port.irq = zilog_irq;
+ up[(chip * 2) + 1].port.uartclk = ZS_CLOCK;
+ up[(chip * 2) + 1].port.fifosize = 1;
+ up[(chip * 2) + 1].port.ops = &sunzilog_pops;
+ up[(chip * 2) + 1].port.type = PORT_SUNZILOG;
+ up[(chip * 2) + 1].port.flags = 0;
+ up[(chip * 2) + 1].port.line = (chip * 2) + 1;
+ up[(chip * 2) + 1].flags |= 0;
+ }
+}
+
+static void __init sunzilog_init_kbdms(struct uart_sunzilog_port *up, int channel)
+{
+ int baud, brg;
+
+ if (channel == KEYBOARD_LINE) {
+ up->flags |= SUNZILOG_FLAG_CONS_KEYB;
+ up->cflag = B1200 | CS8 | CLOCAL | CREAD;
+ baud = 1200;
+ } else {
+ up->flags |= SUNZILOG_FLAG_CONS_MOUSE;
+ up->cflag = B4800 | CS8 | CLOCAL | CREAD;
+ baud = 4800;
+ }
+ printk(KERN_INFO "zs%d at 0x%p (irq = %s) is a SunZilog\n",
+ channel, up->port.membase, __irq_itoa(zilog_irq));
+
+ up->curregs[R15] = BRKIE;
+ brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
+ sunzilog_convert_to_zs(up, up->cflag, 0, brg);
+ sunzilog_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
+ __sunzilog_startup(up);
+}
+
+#ifdef CONFIG_SERIO
+static void __init sunzilog_register_serio(struct uart_sunzilog_port *up, int channel)
+{
+ struct serio *serio;
+
+ up->serio = serio = kmalloc(sizeof(struct serio), GFP_KERNEL);
+ if (serio) {
+ memset(serio, 0, sizeof(*serio));
+
+ serio->port_data = up;
+
+ serio->id.type = SERIO_RS232;
+ if (channel == KEYBOARD_LINE) {
+ serio->id.proto = SERIO_SUNKBD;
+ strlcpy(serio->name, "zskbd", sizeof(serio->name));
+ } else {
+ serio->id.proto = SERIO_SUN;
+ serio->id.extra = 1;
+ strlcpy(serio->name, "zsms", sizeof(serio->name));
+ }
+ strlcpy(serio->phys,
+ (channel == KEYBOARD_LINE ? "zs/serio0" : "zs/serio1"),
+ sizeof(serio->phys));
+
+ serio->write = sunzilog_serio_write;
+ serio->open = sunzilog_serio_open;
+ serio->close = sunzilog_serio_close;
+
+ serio_register_port(serio);
+ } else {
+ printk(KERN_WARNING "zs%d: not enough memory for serio port\n",
+ channel);
+ }
+}
+#endif
+
+static void __init sunzilog_init_hw(void)
+{
+ int i;
+
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ struct uart_sunzilog_port *up = &sunzilog_port_table[i];
+ struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(&up->port);
+ unsigned long flags;
+ int baud, brg;
+
+ spin_lock_irqsave(&up->port.lock, flags);
+
+ if (ZS_IS_CHANNEL_A(up)) {
+ write_zsreg(channel, R9, FHWRES);
+ ZSDELAY_LONG();
+ (void) read_zsreg(channel, R0);
+ }
+
+ if (i == KEYBOARD_LINE || i == MOUSE_LINE) {
+ sunzilog_init_kbdms(up, i);
+ up->curregs[R9] |= (NV | MIE);
+ write_zsreg(channel, R9, up->curregs[R9]);
+ } else {
+ /* Normal serial TTY. */
+ up->parity_mask = 0xff;
+ up->curregs[R1] = EXT_INT_ENAB | INT_ALL_Rx | TxINT_ENAB;
+ up->curregs[R4] = PAR_EVEN | X16CLK | SB1;
+ up->curregs[R3] = RxENAB | Rx8;
+ up->curregs[R5] = TxENAB | Tx8;
+ up->curregs[R9] = NV | MIE;
+ up->curregs[R10] = NRZ;
+ up->curregs[R11] = TCBR | RCBR;
+ baud = 9600;
+ brg = BPS_TO_BRG(baud, ZS_CLOCK / ZS_CLOCK_DIVISOR);
+ up->curregs[R12] = (brg & 0xff);
+ up->curregs[R13] = (brg >> 8) & 0xff;
+ up->curregs[R14] = BRSRC | BRENAB;
+ __load_zsregs(channel, up->curregs);
+ write_zsreg(channel, R9, up->curregs[R9]);
+ }
+
+ spin_unlock_irqrestore(&up->port.lock, flags);
+
+#ifdef CONFIG_SERIO
+ if (i == KEYBOARD_LINE || i == MOUSE_LINE)
+ sunzilog_register_serio(up, i);
+#endif
+ }
+}
+
+static struct zilog_layout __iomem * __init get_zs(int chip, int node);
+
+static void __init sunzilog_scan_probe(struct zs_probe_scan *t, int node)
+{
+ sunzilog_chip_regs[t->devices] = get_zs(t->devices, node);
+ t->devices++;
+}
+
+static int __init sunzilog_ports_init(void)
+{
+ struct zs_probe_scan scan;
+ int ret;
+ int uart_count;
+ int i;
+
+ printk(KERN_DEBUG "SunZilog: %d chips.\n", NUM_SUNZILOG);
+
+ scan.scanner = sunzilog_scan_probe;
+ scan.depth = 0;
+ scan.devices = 0;
+ sunzilog_scan(&scan, prom_getchild(prom_root_node));
+
+ sunzilog_prepare();
+
+ if (request_irq(zilog_irq, sunzilog_interrupt, SA_SHIRQ,
+ "SunZilog", sunzilog_irq_chain)) {
+ prom_printf("SunZilog: Unable to register zs interrupt handler.\n");
+ prom_halt();
+ }
+
+ sunzilog_init_hw();
+
+ /* We can only init this once we have probed the Zilogs
+ * in the system. Do not count channels assigned to keyboards
+ * or mice when we are deciding how many ports to register.
+ */
+ uart_count = 0;
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ struct uart_sunzilog_port *up = &sunzilog_port_table[i];
+
+ if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up))
+ continue;
+
+ uart_count++;
+ }
+
+ sunzilog_reg.nr = uart_count;
+ sunzilog_reg.cons = SUNZILOG_CONSOLE;
+
+ sunzilog_reg.minor = sunserial_current_minor;
+ sunserial_current_minor += uart_count;
+
+ ret = uart_register_driver(&sunzilog_reg);
+ if (ret == 0) {
+ sunzilog_console_init();
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ struct uart_sunzilog_port *up = &sunzilog_port_table[i];
+
+ if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up))
+ continue;
+
+ if (uart_add_one_port(&sunzilog_reg, &up->port)) {
+ printk(KERN_ERR
+ "SunZilog: failed to add port zs%d\n", i);
+ }
+ }
+ }
+
+ return ret;
+}
+
+static void __init sunzilog_scan_count(struct zs_probe_scan *t, int node)
+{
+ t->devices++;
+}
+
+static int __init sunzilog_ports_count(void)
+{
+ struct zs_probe_scan scan;
+
+ /* Sun4 Zilog setup is hard coded, no probing to do. */
+ if (sparc_cpu_model == sun4)
+ return 2;
+
+ scan.scanner = sunzilog_scan_count;
+ scan.depth = 0;
+ scan.devices = 0;
+
+ sunzilog_scan(&scan, prom_getchild(prom_root_node));
+
+ return scan.devices;
+}
+
+static int __init sunzilog_init(void)
+{
+
+ NUM_SUNZILOG = sunzilog_ports_count();
+ if (NUM_SUNZILOG == 0)
+ return -ENODEV;
+
+ sunzilog_alloc_tables();
+
+ sunzilog_ports_init();
+
+ return 0;
+}
+
+static void __exit sunzilog_exit(void)
+{
+ int i;
+
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ struct uart_sunzilog_port *up = &sunzilog_port_table[i];
+
+ if (ZS_IS_KEYB(up) || ZS_IS_MOUSE(up)) {
+#ifdef CONFIG_SERIO
+ if (up->serio) {
+ serio_unregister_port(up->serio);
+ up->serio = NULL;
+ }
+#endif
+ } else
+ uart_remove_one_port(&sunzilog_reg, &up->port);
+ }
+
+ uart_unregister_driver(&sunzilog_reg);
+}
+
+module_init(sunzilog_init);
+module_exit(sunzilog_exit);
+
+MODULE_AUTHOR("David S. Miller");
+MODULE_DESCRIPTION("Sun Zilog serial port driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/sunzilog.h b/drivers/serial/sunzilog.h
new file mode 100644
index 00000000000..7939b6d7127
--- /dev/null
+++ b/drivers/serial/sunzilog.h
@@ -0,0 +1,272 @@
+#ifndef _SUNZILOG_H
+#define _SUNZILOG_H
+
+struct zilog_channel {
+ volatile unsigned char control;
+ volatile unsigned char __pad1;
+ volatile unsigned char data;
+ volatile unsigned char __pad2;
+};
+
+struct zilog_layout {
+ struct zilog_channel channelB;
+ struct zilog_channel channelA;
+};
+
+#define NUM_ZSREGS 16
+
+/* Conversion routines to/from brg time constants from/to bits
+ * per second.
+ */
+#define BRG_TO_BPS(brg, freq) ((freq) / 2 / ((brg) + 2))
+#define BPS_TO_BRG(bps, freq) ((((freq) + (bps)) / (2 * (bps))) - 2)
+
+/* The Zilog register set */
+
+#define FLAG 0x7e
+
+/* Write Register 0 */
+#define R0 0 /* Register selects */
+#define R1 1
+#define R2 2
+#define R3 3
+#define R4 4
+#define R5 5
+#define R6 6
+#define R7 7
+#define R8 8
+#define R9 9
+#define R10 10
+#define R11 11
+#define R12 12
+#define R13 13
+#define R14 14
+#define R15 15
+
+#define NULLCODE 0 /* Null Code */
+#define POINT_HIGH 0x8 /* Select upper half of registers */
+#define RES_EXT_INT 0x10 /* Reset Ext. Status Interrupts */
+#define SEND_ABORT 0x18 /* HDLC Abort */
+#define RES_RxINT_FC 0x20 /* Reset RxINT on First Character */
+#define RES_Tx_P 0x28 /* Reset TxINT Pending */
+#define ERR_RES 0x30 /* Error Reset */
+#define RES_H_IUS 0x38 /* Reset highest IUS */
+
+#define RES_Rx_CRC 0x40 /* Reset Rx CRC Checker */
+#define RES_Tx_CRC 0x80 /* Reset Tx CRC Checker */
+#define RES_EOM_L 0xC0 /* Reset EOM latch */
+
+/* Write Register 1 */
+
+#define EXT_INT_ENAB 0x1 /* Ext Int Enable */
+#define TxINT_ENAB 0x2 /* Tx Int Enable */
+#define PAR_SPEC 0x4 /* Parity is special condition */
+
+#define RxINT_DISAB 0 /* Rx Int Disable */
+#define RxINT_FCERR 0x8 /* Rx Int on First Character Only or Error */
+#define INT_ALL_Rx 0x10 /* Int on all Rx Characters or error */
+#define INT_ERR_Rx 0x18 /* Int on error only */
+#define RxINT_MASK 0x18
+
+#define WT_RDY_RT 0x20 /* Wait/Ready on R/T */
+#define WT_FN_RDYFN 0x40 /* Wait/FN/Ready FN */
+#define WT_RDY_ENAB 0x80 /* Wait/Ready Enable */
+
+/* Write Register #2 (Interrupt Vector) */
+
+/* Write Register 3 */
+
+#define RxENAB 0x1 /* Rx Enable */
+#define SYNC_L_INH 0x2 /* Sync Character Load Inhibit */
+#define ADD_SM 0x4 /* Address Search Mode (SDLC) */
+#define RxCRC_ENAB 0x8 /* Rx CRC Enable */
+#define ENT_HM 0x10 /* Enter Hunt Mode */
+#define AUTO_ENAB 0x20 /* Auto Enables */
+#define Rx5 0x0 /* Rx 5 Bits/Character */
+#define Rx7 0x40 /* Rx 7 Bits/Character */
+#define Rx6 0x80 /* Rx 6 Bits/Character */
+#define Rx8 0xc0 /* Rx 8 Bits/Character */
+#define RxN_MASK 0xc0
+
+/* Write Register 4 */
+
+#define PAR_ENAB 0x1 /* Parity Enable */
+#define PAR_EVEN 0x2 /* Parity Even/Odd* */
+
+#define SYNC_ENAB 0 /* Sync Modes Enable */
+#define SB1 0x4 /* 1 stop bit/char */
+#define SB15 0x8 /* 1.5 stop bits/char */
+#define SB2 0xc /* 2 stop bits/char */
+
+#define MONSYNC 0 /* 8 Bit Sync character */
+#define BISYNC 0x10 /* 16 bit sync character */
+#define SDLC 0x20 /* SDLC Mode (01111110 Sync Flag) */
+#define EXTSYNC 0x30 /* External Sync Mode */
+
+#define X1CLK 0x0 /* x1 clock mode */
+#define X16CLK 0x40 /* x16 clock mode */
+#define X32CLK 0x80 /* x32 clock mode */
+#define X64CLK 0xC0 /* x64 clock mode */
+#define XCLK_MASK 0xC0
+
+/* Write Register 5 */
+
+#define TxCRC_ENAB 0x1 /* Tx CRC Enable */
+#define RTS 0x2 /* RTS */
+#define SDLC_CRC 0x4 /* SDLC/CRC-16 */
+#define TxENAB 0x8 /* Tx Enable */
+#define SND_BRK 0x10 /* Send Break */
+#define Tx5 0x0 /* Tx 5 bits (or less)/character */
+#define Tx7 0x20 /* Tx 7 bits/character */
+#define Tx6 0x40 /* Tx 6 bits/character */
+#define Tx8 0x60 /* Tx 8 bits/character */
+#define TxN_MASK 0x60
+#define DTR 0x80 /* DTR */
+
+/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */
+
+/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */
+
+/* Write Register 8 (transmit buffer) */
+
+/* Write Register 9 (Master interrupt control) */
+#define VIS 1 /* Vector Includes Status */
+#define NV 2 /* No Vector */
+#define DLC 4 /* Disable Lower Chain */
+#define MIE 8 /* Master Interrupt Enable */
+#define STATHI 0x10 /* Status high */
+#define NORESET 0 /* No reset on write to R9 */
+#define CHRB 0x40 /* Reset channel B */
+#define CHRA 0x80 /* Reset channel A */
+#define FHWRES 0xc0 /* Force hardware reset */
+
+/* Write Register 10 (misc control bits) */
+#define BIT6 1 /* 6 bit/8bit sync */
+#define LOOPMODE 2 /* SDLC Loop mode */
+#define ABUNDER 4 /* Abort/flag on SDLC xmit underrun */
+#define MARKIDLE 8 /* Mark/flag on idle */
+#define GAOP 0x10 /* Go active on poll */
+#define NRZ 0 /* NRZ mode */
+#define NRZI 0x20 /* NRZI mode */
+#define FM1 0x40 /* FM1 (transition = 1) */
+#define FM0 0x60 /* FM0 (transition = 0) */
+#define CRCPS 0x80 /* CRC Preset I/O */
+
+/* Write Register 11 (Clock Mode control) */
+#define TRxCXT 0 /* TRxC = Xtal output */
+#define TRxCTC 1 /* TRxC = Transmit clock */
+#define TRxCBR 2 /* TRxC = BR Generator Output */
+#define TRxCDP 3 /* TRxC = DPLL output */
+#define TRxCOI 4 /* TRxC O/I */
+#define TCRTxCP 0 /* Transmit clock = RTxC pin */
+#define TCTRxCP 8 /* Transmit clock = TRxC pin */
+#define TCBR 0x10 /* Transmit clock = BR Generator output */
+#define TCDPLL 0x18 /* Transmit clock = DPLL output */
+#define RCRTxCP 0 /* Receive clock = RTxC pin */
+#define RCTRxCP 0x20 /* Receive clock = TRxC pin */
+#define RCBR 0x40 /* Receive clock = BR Generator output */
+#define RCDPLL 0x60 /* Receive clock = DPLL output */
+#define RTxCX 0x80 /* RTxC Xtal/No Xtal */
+
+/* Write Register 12 (lower byte of baud rate generator time constant) */
+
+/* Write Register 13 (upper byte of baud rate generator time constant) */
+
+/* Write Register 14 (Misc control bits) */
+#define BRENAB 1 /* Baud rate generator enable */
+#define BRSRC 2 /* Baud rate generator source */
+#define DTRREQ 4 /* DTR/Request function */
+#define AUTOECHO 8 /* Auto Echo */
+#define LOOPBAK 0x10 /* Local loopback */
+#define SEARCH 0x20 /* Enter search mode */
+#define RMC 0x40 /* Reset missing clock */
+#define DISDPLL 0x60 /* Disable DPLL */
+#define SSBR 0x80 /* Set DPLL source = BR generator */
+#define SSRTxC 0xa0 /* Set DPLL source = RTxC */
+#define SFMM 0xc0 /* Set FM mode */
+#define SNRZI 0xe0 /* Set NRZI mode */
+
+/* Write Register 15 (external/status interrupt control) */
+#define ZCIE 2 /* Zero count IE */
+#define DCDIE 8 /* DCD IE */
+#define SYNCIE 0x10 /* Sync/hunt IE */
+#define CTSIE 0x20 /* CTS IE */
+#define TxUIE 0x40 /* Tx Underrun/EOM IE */
+#define BRKIE 0x80 /* Break/Abort IE */
+
+
+/* Read Register 0 */
+#define Rx_CH_AV 0x1 /* Rx Character Available */
+#define ZCOUNT 0x2 /* Zero count */
+#define Tx_BUF_EMP 0x4 /* Tx Buffer empty */
+#define DCD 0x8 /* DCD */
+#define SYNC 0x10 /* Sync/hunt */
+#define CTS 0x20 /* CTS */
+#define TxEOM 0x40 /* Tx underrun */
+#define BRK_ABRT 0x80 /* Break/Abort */
+
+/* Read Register 1 */
+#define ALL_SNT 0x1 /* All sent */
+/* Residue Data for 8 Rx bits/char programmed */
+#define RES3 0x8 /* 0/3 */
+#define RES4 0x4 /* 0/4 */
+#define RES5 0xc /* 0/5 */
+#define RES6 0x2 /* 0/6 */
+#define RES7 0xa /* 0/7 */
+#define RES8 0x6 /* 0/8 */
+#define RES18 0xe /* 1/8 */
+#define RES28 0x0 /* 2/8 */
+/* Special Rx Condition Interrupts */
+#define PAR_ERR 0x10 /* Parity error */
+#define Rx_OVR 0x20 /* Rx Overrun Error */
+#define CRC_ERR 0x40 /* CRC/Framing Error */
+#define END_FR 0x80 /* End of Frame (SDLC) */
+
+/* Read Register 2 (channel b only) - Interrupt vector */
+#define CHB_Tx_EMPTY 0x00
+#define CHB_EXT_STAT 0x02
+#define CHB_Rx_AVAIL 0x04
+#define CHB_SPECIAL 0x06
+#define CHA_Tx_EMPTY 0x08
+#define CHA_EXT_STAT 0x0a
+#define CHA_Rx_AVAIL 0x0c
+#define CHA_SPECIAL 0x0e
+#define STATUS_MASK 0x0e
+
+/* Read Register 3 (interrupt pending register) ch a only */
+#define CHBEXT 0x1 /* Channel B Ext/Stat IP */
+#define CHBTxIP 0x2 /* Channel B Tx IP */
+#define CHBRxIP 0x4 /* Channel B Rx IP */
+#define CHAEXT 0x8 /* Channel A Ext/Stat IP */
+#define CHATxIP 0x10 /* Channel A Tx IP */
+#define CHARxIP 0x20 /* Channel A Rx IP */
+
+/* Read Register 8 (receive data register) */
+
+/* Read Register 10 (misc status bits) */
+#define ONLOOP 2 /* On loop */
+#define LOOPSEND 0x10 /* Loop sending */
+#define CLK2MIS 0x40 /* Two clocks missing */
+#define CLK1MIS 0x80 /* One clock missing */
+
+/* Read Register 12 (lower byte of baud rate generator constant) */
+
+/* Read Register 13 (upper byte of baud rate generator constant) */
+
+/* Read Register 15 (value of WR 15) */
+
+/* Misc macros */
+#define ZS_CLEARERR(channel) do { sbus_writeb(ERR_RES, &channel->control); \
+ udelay(5); } while(0)
+
+#define ZS_CLEARSTAT(channel) do { sbus_writeb(RES_EXT_INT, &channel->control); \
+ udelay(5); } while(0)
+
+#define ZS_CLEARFIFO(channel) do { sbus_readb(&channel->data); \
+ udelay(2); \
+ sbus_readb(&channel->data); \
+ udelay(2); \
+ sbus_readb(&channel->data); \
+ udelay(2); } while(0)
+
+#endif /* _SUNZILOG_H */
diff --git a/drivers/serial/uart00.c b/drivers/serial/uart00.c
new file mode 100644
index 00000000000..186f1300cea
--- /dev/null
+++ b/drivers/serial/uart00.c
@@ -0,0 +1,782 @@
+/*
+ * linux/drivers/serial/uart00.c
+ *
+ * Driver for UART00 serial ports
+ *
+ * Based on drivers/char/serial_amba.c, by ARM Limited &
+ * Deep Blue Solutions Ltd.
+ * Copyright 2001 Altera Corporation
+ *
+ * Update for 2.6.4 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * $Id: uart00.c,v 1.35 2002/07/28 10:03:28 rmk Exp $
+ *
+ */
+#include <linux/config.h>
+
+#if defined(CONFIG_SERIAL_UART00_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/arch/excalibur.h>
+#define UART00_TYPE (volatile unsigned int*)
+#include <asm/arch/uart00.h>
+#include <asm/arch/int_ctrl00.h>
+
+#define UART_NR 2
+
+#define SERIAL_UART00_NAME "ttyUA"
+#define SERIAL_UART00_MAJOR 204
+#define SERIAL_UART00_MINOR 16 /* Temporary - will change in future */
+#define SERIAL_UART00_NR UART_NR
+#define UART_PORT_SIZE 0x50
+
+#define UART00_ISR_PASS_LIMIT 256
+
+/*
+ * Access macros for the UART00 UARTs
+ */
+#define UART_GET_INT_STATUS(p) inl(UART_ISR((p)->membase))
+#define UART_PUT_IES(p, c) outl(c,UART_IES((p)->membase))
+#define UART_GET_IES(p) inl(UART_IES((p)->membase))
+#define UART_PUT_IEC(p, c) outl(c,UART_IEC((p)->membase))
+#define UART_GET_IEC(p) inl(UART_IEC((p)->membase))
+#define UART_PUT_CHAR(p, c) outl(c,UART_TD((p)->membase))
+#define UART_GET_CHAR(p) inl(UART_RD((p)->membase))
+#define UART_GET_RSR(p) inl(UART_RSR((p)->membase))
+#define UART_GET_RDS(p) inl(UART_RDS((p)->membase))
+#define UART_GET_MSR(p) inl(UART_MSR((p)->membase))
+#define UART_GET_MCR(p) inl(UART_MCR((p)->membase))
+#define UART_PUT_MCR(p, c) outl(c,UART_MCR((p)->membase))
+#define UART_GET_MC(p) inl(UART_MC((p)->membase))
+#define UART_PUT_MC(p, c) outl(c,UART_MC((p)->membase))
+#define UART_GET_TSR(p) inl(UART_TSR((p)->membase))
+#define UART_GET_DIV_HI(p) inl(UART_DIV_HI((p)->membase))
+#define UART_PUT_DIV_HI(p,c) outl(c,UART_DIV_HI((p)->membase))
+#define UART_GET_DIV_LO(p) inl(UART_DIV_LO((p)->membase))
+#define UART_PUT_DIV_LO(p,c) outl(c,UART_DIV_LO((p)->membase))
+#define UART_RX_DATA(s) ((s) & UART_RSR_RX_LEVEL_MSK)
+#define UART_TX_READY(s) (((s) & UART_TSR_TX_LEVEL_MSK) < 15)
+//#define UART_TX_EMPTY(p) ((UART_GET_FR(p) & UART00_UARTFR_TMSK) == 0)
+
+static void uart00_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ UART_PUT_IEC(port, UART_IEC_TIE_MSK);
+}
+
+static void uart00_stop_rx(struct uart_port *port)
+{
+ UART_PUT_IEC(port, UART_IEC_RE_MSK);
+}
+
+static void uart00_enable_ms(struct uart_port *port)
+{
+ UART_PUT_IES(port, UART_IES_ME_MSK);
+}
+
+static void
+uart00_rx_chars(struct uart_port *port, struct pt_regs *regs)
+{
+ struct tty_struct *tty = port->info->tty;
+ unsigned int status, ch, rds, flg, ignored = 0;
+
+ status = UART_GET_RSR(port);
+ while (UART_RX_DATA(status)) {
+ /*
+ * We need to read rds before reading the
+ * character from the fifo
+ */
+ rds = UART_GET_RDS(port);
+ ch = UART_GET_CHAR(port);
+ port->icount.rx++;
+
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+ goto ignore_char;
+
+ flg = TTY_NORMAL;
+
+ /*
+ * Note that the error handling code is
+ * out of the main execution path
+ */
+ if (rds & (UART_RDS_BI_MSK |UART_RDS_FE_MSK|
+ UART_RDS_PE_MSK |UART_RDS_PE_MSK))
+ goto handle_error;
+ if (uart_handle_sysrq_char(port, ch, regs))
+ goto ignore_char;
+
+ error_return:
+ tty_insert_flip_char(tty, ch, flg);
+
+ ignore_char:
+ status = UART_GET_RSR(port);
+ }
+ out:
+ tty_flip_buffer_push(tty);
+ return;
+
+ handle_error:
+ if (rds & UART_RDS_BI_MSK) {
+ status &= ~(UART_RDS_FE_MSK | UART_RDS_PE_MSK);
+ port->icount.brk++;
+ if (uart_handle_break(port))
+ goto ignore_char;
+ } else if (rds & UART_RDS_PE_MSK)
+ port->icount.parity++;
+ else if (rds & UART_RDS_FE_MSK)
+ port->icount.frame++;
+ if (rds & UART_RDS_OE_MSK)
+ port->icount.overrun++;
+
+ if (rds & port->ignore_status_mask) {
+ if (++ignored > 100)
+ goto out;
+ goto ignore_char;
+ }
+ rds &= port->read_status_mask;
+
+ if (rds & UART_RDS_BI_MSK)
+ flg = TTY_BREAK;
+ else if (rds & UART_RDS_PE_MSK)
+ flg = TTY_PARITY;
+ else if (rds & UART_RDS_FE_MSK)
+ flg = TTY_FRAME;
+
+ if (rds & UART_RDS_OE_MSK) {
+ /*
+ * CHECK: does overrun affect the current character?
+ * ASSUMPTION: it does not.
+ */
+ tty_insert_flip_char(tty, ch, flg);
+ ch = 0;
+ flg = TTY_OVERRUN;
+ }
+#ifdef SUPPORT_SYSRQ
+ port->sysrq = 0;
+#endif
+ goto error_return;
+}
+
+static void uart00_tx_chars(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->info->xmit;
+ int count;
+
+ if (port->x_char) {
+ while ((UART_GET_TSR(port) & UART_TSR_TX_LEVEL_MSK) == 15)
+ barrier();
+ UART_PUT_CHAR(port, port->x_char);
+ port->icount.tx++;
+ port->x_char = 0;
+ return;
+ }
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ uart00_stop_tx(port, 0);
+ return;
+ }
+
+ count = port->fifosize >> 1;
+ do {
+ while ((UART_GET_TSR(port) & UART_TSR_TX_LEVEL_MSK) == 15)
+ barrier();
+ UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ } while (--count > 0);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit))
+ uart00_stop_tx(port, 0);
+}
+
+static void uart00_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+ UART_PUT_IES(port, UART_IES_TIE_MSK);
+ uart00_tx_chars(port);
+}
+
+static void uart00_modem_status(struct uart_port *port)
+{
+ unsigned int status;
+
+ status = UART_GET_MSR(port);
+
+ if (!(status & (UART_MSR_DCTS_MSK | UART_MSR_DDSR_MSK |
+ UART_MSR_TERI_MSK | UART_MSR_DDCD_MSK)))
+ return;
+
+ if (status & UART_MSR_DDCD_MSK)
+ uart_handle_dcd_change(port, status & UART_MSR_DCD_MSK);
+
+ if (status & UART_MSR_DDSR_MSK)
+ port->icount.dsr++;
+
+ if (status & UART_MSR_DCTS_MSK)
+ uart_handle_cts_change(port, status & UART_MSR_CTS_MSK);
+
+ wake_up_interruptible(&port->info->delta_msr_wait);
+}
+
+static irqreturn_t uart00_int(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct uart_port *port = dev_id;
+ unsigned int status, pass_counter = 0;
+
+ status = UART_GET_INT_STATUS(port);
+ do {
+ if (status & UART_ISR_RI_MSK)
+ uart00_rx_chars(port, regs);
+ if (status & UART_ISR_MI_MSK)
+ uart00_modem_status(port);
+ if (status & (UART_ISR_TI_MSK | UART_ISR_TII_MSK))
+ uart00_tx_chars(port);
+ if (pass_counter++ > UART00_ISR_PASS_LIMIT)
+ break;
+
+ status = UART_GET_INT_STATUS(port);
+ } while (status);
+
+ return IRQ_HANDLED;
+}
+
+static unsigned int uart00_tx_empty(struct uart_port *port)
+{
+ return UART_GET_TSR(port) & UART_TSR_TX_LEVEL_MSK? 0 : TIOCSER_TEMT;
+}
+
+static unsigned int uart00_get_mctrl(struct uart_port *port)
+{
+ unsigned int result = 0;
+ unsigned int status;
+
+ status = UART_GET_MSR(port);
+ if (status & UART_MSR_DCD_MSK)
+ result |= TIOCM_CAR;
+ if (status & UART_MSR_DSR_MSK)
+ result |= TIOCM_DSR;
+ if (status & UART_MSR_CTS_MSK)
+ result |= TIOCM_CTS;
+ if (status & UART_MSR_RI_MSK)
+ result |= TIOCM_RI;
+
+ return result;
+}
+
+static void uart00_set_mctrl_null(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+static void uart00_break_ctl(struct uart_port *port, int break_state)
+{
+ unsigned long flags;
+ unsigned int mcr;
+
+ spin_lock_irqsave(&port->lock, flags);
+ mcr = UART_GET_MCR(port);
+ if (break_state == -1)
+ mcr |= UART_MCR_BR_MSK;
+ else
+ mcr &= ~UART_MCR_BR_MSK;
+ UART_PUT_MCR(port, mcr);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void
+uart00_set_termios(struct uart_port *port, struct termios *termios,
+ struct termios *old)
+{
+ unsigned int uart_mc, old_ies, baud, quot;
+ unsigned long flags;
+
+ /*
+ * We don't support CREAD (yet)
+ */
+ termios->c_cflag |= CREAD;
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ quot = uart_get_divisor(port, baud);
+
+ /* byte size and parity */
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ uart_mc = UART_MC_CLS_CHARLEN_5;
+ break;
+ case CS6:
+ uart_mc = UART_MC_CLS_CHARLEN_6;
+ break;
+ case CS7:
+ uart_mc = UART_MC_CLS_CHARLEN_7;
+ break;
+ default: // CS8
+ uart_mc = UART_MC_CLS_CHARLEN_8;
+ break;
+ }
+ if (termios->c_cflag & CSTOPB)
+ uart_mc|= UART_MC_ST_TWO;
+ if (termios->c_cflag & PARENB) {
+ uart_mc |= UART_MC_PE_MSK;
+ if (!(termios->c_cflag & PARODD))
+ uart_mc |= UART_MC_EP_MSK;
+ }
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ port->read_status_mask = UART_RDS_OE_MSK;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= UART_RDS_FE_MSK | UART_RDS_PE_MSK;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= UART_RDS_BI_MSK;
+
+ /*
+ * Characters to ignore
+ */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= UART_RDS_FE_MSK | UART_RDS_PE_MSK;
+ if (termios->c_iflag & IGNBRK) {
+ port->ignore_status_mask |= UART_RDS_BI_MSK;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns to (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= UART_RDS_OE_MSK;
+ }
+
+ /* first, disable everything */
+ old_ies = UART_GET_IES(port);
+
+ if (UART_ENABLE_MS(port, termios->c_cflag))
+ old_ies |= UART_IES_ME_MSK;
+
+ /* Set baud rate */
+ UART_PUT_DIV_LO(port, (quot & 0xff));
+ UART_PUT_DIV_HI(port, ((quot & 0xf00) >> 8));
+
+ UART_PUT_MC(port, uart_mc);
+ UART_PUT_IES(port, old_ies);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int uart00_startup(struct uart_port *port)
+{
+ int result;
+
+ /*
+ * Allocate the IRQ
+ */
+ result = request_irq(port->irq, uart00_int, 0, "uart00", port);
+ if (result) {
+ printk(KERN_ERR "Request of irq %d failed\n", port->irq);
+ return result;
+ }
+
+ /*
+ * Finally, enable interrupts. Use the TII interrupt to minimise
+ * the number of interrupts generated. If higher performance is
+ * needed, consider using the TI interrupt with a suitable FIFO
+ * threshold
+ */
+ UART_PUT_IES(port, UART_IES_RE_MSK | UART_IES_TIE_MSK);
+
+ return 0;
+}
+
+static void uart00_shutdown(struct uart_port *port)
+{
+ /*
+ * disable all interrupts, disable the port
+ */
+ UART_PUT_IEC(port, 0xff);
+
+ /* disable break condition and fifos */
+ UART_PUT_MCR(port, UART_GET_MCR(port) &~UART_MCR_BR_MSK);
+
+ /*
+ * Free the interrupt
+ */
+ free_irq(port->irq, port);
+}
+
+static const char *uart00_type(struct uart_port *port)
+{
+ return port->type == PORT_UART00 ? "Altera UART00" : NULL;
+}
+
+/*
+ * Release the memory region(s) being used by 'port'
+ */
+static void uart00_release_port(struct uart_port *port)
+{
+ release_mem_region(port->mapbase, UART_PORT_SIZE);
+
+#ifdef CONFIG_ARCH_CAMELOT
+ if (port->membase != (void*)IO_ADDRESS(EXC_UART00_BASE)) {
+ iounmap(port->membase);
+ }
+#endif
+}
+
+/*
+ * Request the memory region(s) being used by 'port'
+ */
+static int uart00_request_port(struct uart_port *port)
+{
+ return request_mem_region(port->mapbase, UART_PORT_SIZE, "serial_uart00")
+ != NULL ? 0 : -EBUSY;
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void uart00_config_port(struct uart_port *port, int flags)
+{
+
+ /*
+ * Map the io memory if this is a soft uart
+ */
+ if (!port->membase)
+ port->membase = ioremap_nocache(port->mapbase,SZ_4K);
+
+ if (!port->membase)
+ printk(KERN_ERR "serial00: cannot map io memory\n");
+ else
+ port->type = PORT_UART00;
+
+}
+
+/*
+ * verify the new serial_struct (for TIOCSSERIAL).
+ */
+static int uart00_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ int ret = 0;
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_UART00)
+ ret = -EINVAL;
+ if (ser->irq < 0 || ser->irq >= NR_IRQS)
+ ret = -EINVAL;
+ if (ser->baud_base < 9600)
+ ret = -EINVAL;
+ return ret;
+}
+
+static struct uart_ops uart00_pops = {
+ .tx_empty = uart00_tx_empty,
+ .set_mctrl = uart00_set_mctrl_null,
+ .get_mctrl = uart00_get_mctrl,
+ .stop_tx = uart00_stop_tx,
+ .start_tx = uart00_start_tx,
+ .stop_rx = uart00_stop_rx,
+ .enable_ms = uart00_enable_ms,
+ .break_ctl = uart00_break_ctl,
+ .startup = uart00_startup,
+ .shutdown = uart00_shutdown,
+ .set_termios = uart00_set_termios,
+ .type = uart00_type,
+ .release_port = uart00_release_port,
+ .request_port = uart00_request_port,
+ .config_port = uart00_config_port,
+ .verify_port = uart00_verify_port,
+};
+
+
+#ifdef CONFIG_ARCH_CAMELOT
+static struct uart_port epxa10db_port = {
+ .membase = (void*)IO_ADDRESS(EXC_UART00_BASE),
+ .mapbase = EXC_UART00_BASE,
+ .iotype = SERIAL_IO_MEM,
+ .irq = IRQ_UART,
+ .uartclk = EXC_AHB2_CLK_FREQUENCY,
+ .fifosize = 16,
+ .ops = &uart00_pops,
+ .flags = ASYNC_BOOT_AUTOCONF,
+};
+#endif
+
+
+#ifdef CONFIG_SERIAL_UART00_CONSOLE
+static void uart00_console_write(struct console *co, const char *s, unsigned count)
+{
+#ifdef CONFIG_ARCH_CAMELOT
+ struct uart_port *port = &epxa10db_port;
+ unsigned int status, old_ies;
+ int i;
+
+ /*
+ * First save the CR then disable the interrupts
+ */
+ old_ies = UART_GET_IES(port);
+ UART_PUT_IEC(port,0xff);
+
+ /*
+ * Now, do each character
+ */
+ for (i = 0; i < count; i++) {
+ do {
+ status = UART_GET_TSR(port);
+ } while (!UART_TX_READY(status));
+ UART_PUT_CHAR(port, s[i]);
+ if (s[i] == '\n') {
+ do {
+ status = UART_GET_TSR(port);
+ } while (!UART_TX_READY(status));
+ UART_PUT_CHAR(port, '\r');
+ }
+ }
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the IES
+ */
+ do {
+ status = UART_GET_TSR(port);
+ } while (status & UART_TSR_TX_LEVEL_MSK);
+ UART_PUT_IES(port, old_ies);
+#endif
+}
+
+static void __init
+uart00_console_get_options(struct uart_port *port, int *baud,
+ int *parity, int *bits)
+{
+ unsigned int uart_mc, quot;
+
+ uart_mc = UART_GET_MC(port);
+
+ *parity = 'n';
+ if (uart_mc & UART_MC_PE_MSK) {
+ if (uart_mc & UART_MC_EP_MSK)
+ *parity = 'e';
+ else
+ *parity = 'o';
+ }
+
+ switch (uart_mc & UART_MC_CLS_MSK) {
+ case UART_MC_CLS_CHARLEN_5:
+ *bits = 5;
+ break;
+ case UART_MC_CLS_CHARLEN_6:
+ *bits = 6;
+ break;
+ case UART_MC_CLS_CHARLEN_7:
+ *bits = 7;
+ break;
+ case UART_MC_CLS_CHARLEN_8:
+ *bits = 8;
+ break;
+ }
+ quot = UART_GET_DIV_LO(port) | (UART_GET_DIV_HI(port) << 8);
+ *baud = port->uartclk / (16 *quot );
+}
+
+static int __init uart00_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+#ifdef CONFIG_ARCH_CAMELOT
+ port = &epxa10db_port; ;
+#else
+ return -ENODEV;
+#endif
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ else
+ uart00_console_get_options(port, &baud, &parity, &bits);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+extern struct uart_driver uart00_reg;
+static struct console uart00_console = {
+ .name = SERIAL_UART00_NAME,
+ .write = uart00_console_write,
+ .device = uart_console_device,
+ .setup = uart00_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = 0,
+ .data = &uart00_reg,
+};
+
+static int __init uart00_console_init(void)
+{
+ register_console(&uart00_console);
+ return 0;
+}
+console_initcall(uart00_console_init);
+
+#define UART00_CONSOLE &uart00_console
+#else
+#define UART00_CONSOLE NULL
+#endif
+
+static struct uart_driver uart00_reg = {
+ .owner = NULL,
+ .driver_name = SERIAL_UART00_NAME,
+ .dev_name = SERIAL_UART00_NAME,
+ .major = SERIAL_UART00_MAJOR,
+ .minor = SERIAL_UART00_MINOR,
+ .nr = UART_NR,
+ .cons = UART00_CONSOLE,
+};
+
+struct dev_port_entry{
+ unsigned int base_addr;
+ struct uart_port *port;
+};
+
+#ifdef CONFIG_PLD_HOTSWAP
+
+static struct dev_port_entry dev_port_map[UART_NR];
+
+/*
+ * Keep a mapping of dev_info addresses -> port lines to use when
+ * removing ports dev==NULL indicates unused entry
+ */
+
+struct uart00_ps_data{
+ unsigned int clk;
+ unsigned int fifosize;
+};
+
+int uart00_add_device(struct pldhs_dev_info* dev_info, void* dev_ps_data)
+{
+ struct uart00_ps_data* dev_ps=dev_ps_data;
+ struct uart_port * port;
+ int i,result;
+
+ i=0;
+ while(dev_port_map[i].port)
+ i++;
+
+ if(i==UART_NR){
+ printk(KERN_WARNING "uart00: Maximum number of ports reached\n");
+ return 0;
+ }
+
+ port=kmalloc(sizeof(struct uart_port),GFP_KERNEL);
+ if(!port)
+ return -ENOMEM;
+
+ printk("clk=%d fifo=%d\n",dev_ps->clk,dev_ps->fifosize);
+ port->membase=0;
+ port->mapbase=dev_info->base_addr;
+ port->iotype=SERIAL_IO_MEM;
+ port->irq=dev_info->irq;
+ port->uartclk=dev_ps->clk;
+ port->fifosize=dev_ps->fifosize;
+ port->ops=&uart00_pops;
+ port->line=i;
+ port->flags=ASYNC_BOOT_AUTOCONF;
+
+ result=uart_add_one_port(&uart00_reg, port);
+ if(result){
+ printk("uart_add_one_port returned %d\n",result);
+ return result;
+ }
+ dev_port_map[i].base_addr=dev_info->base_addr;
+ dev_port_map[i].port=port;
+ printk("uart00: added device at %x as ttyUA%d\n",dev_port_map[i].base_addr,i);
+ return 0;
+
+}
+
+int uart00_remove_devices(void)
+{
+ int i,result;
+
+
+ result=0;
+ for(i=1;i<UART_NR;i++){
+ if(dev_port_map[i].base_addr){
+ result=uart_remove_one_port(&uart00_reg, dev_port_map[i].port);
+ if(result)
+ return result;
+
+ /* port removed sucessfully, so now tidy up */
+ kfree(dev_port_map[i].port);
+ dev_port_map[i].base_addr=0;
+ dev_port_map[i].port=NULL;
+ }
+ }
+ return 0;
+
+}
+
+struct pld_hotswap_ops uart00_pldhs_ops={
+ .name = "uart00",
+ .add_device = uart00_add_device,
+ .remove_devices = uart00_remove_devices,
+};
+
+#endif
+
+static int __init uart00_init(void)
+{
+ int result;
+
+ printk(KERN_INFO "Serial: UART00 driver $Revision: 1.35 $\n");
+
+ printk(KERN_WARNING "serial_uart00:Using temporary major/minor pairs"
+ " - these WILL change in the future\n");
+
+ result = uart_register_driver(&uart00_reg);
+ if (result)
+ return result;
+#ifdef CONFIG_ARCH_CAMELOT
+ result = uart_add_one_port(&uart00_reg,&epxa10db_port);
+#endif
+ if (result)
+ uart_unregister_driver(&uart00_reg);
+
+#ifdef CONFIG_PLD_HOTSWAP
+ pldhs_register_driver(&uart00_pldhs_ops);
+#endif
+ return result;
+}
+
+__initcall(uart00_init);
diff --git a/drivers/serial/v850e_uart.c b/drivers/serial/v850e_uart.c
new file mode 100644
index 00000000000..bb482780a41
--- /dev/null
+++ b/drivers/serial/v850e_uart.c
@@ -0,0 +1,549 @@
+/*
+ * drivers/serial/v850e_uart.c -- Serial I/O using V850E on-chip UART or UARTB
+ *
+ * Copyright (C) 2001,02,03 NEC Electronics Corporation
+ * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+/* This driver supports both the original V850E UART interface (called
+ merely `UART' in the docs) and the newer `UARTB' interface, which is
+ roughly a superset of the first one. The selection is made at
+ configure time -- if CONFIG_V850E_UARTB is defined, then UARTB is
+ presumed, otherwise the old UART -- as these are on-CPU UARTS, a system
+ can never have both.
+
+ The UARTB interface also has a 16-entry FIFO mode, which is not
+ yet supported by this driver. */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+
+#include <asm/v850e_uart.h>
+
+/* Initial UART state. This may be overridden by machine-dependent headers. */
+#ifndef V850E_UART_INIT_BAUD
+#define V850E_UART_INIT_BAUD 115200
+#endif
+#ifndef V850E_UART_INIT_CFLAGS
+#define V850E_UART_INIT_CFLAGS (B115200 | CS8 | CREAD)
+#endif
+
+/* A string used for prefixing printed descriptions; since the same UART
+ macro is actually used on other chips than the V850E. This must be a
+ constant string. */
+#ifndef V850E_UART_CHIP_NAME
+#define V850E_UART_CHIP_NAME "V850E"
+#endif
+
+#define V850E_UART_MINOR_BASE 64 /* First tty minor number */
+
+
+/* Low-level UART functions. */
+
+/* Configure and turn on uart channel CHAN, using the termios `control
+ modes' bits in CFLAGS, and a baud-rate of BAUD. */
+void v850e_uart_configure (unsigned chan, unsigned cflags, unsigned baud)
+{
+ int flags;
+ v850e_uart_speed_t old_speed;
+ v850e_uart_config_t old_config;
+ v850e_uart_speed_t new_speed = v850e_uart_calc_speed (baud);
+ v850e_uart_config_t new_config = v850e_uart_calc_config (cflags);
+
+ /* Disable interrupts while we're twiddling the hardware. */
+ local_irq_save (flags);
+
+#ifdef V850E_UART_PRE_CONFIGURE
+ V850E_UART_PRE_CONFIGURE (chan, cflags, baud);
+#endif
+
+ old_config = V850E_UART_CONFIG (chan);
+ old_speed = v850e_uart_speed (chan);
+
+ if (! v850e_uart_speed_eq (old_speed, new_speed)) {
+ /* The baud rate has changed. First, disable the UART. */
+ V850E_UART_CONFIG (chan) = V850E_UART_CONFIG_FINI;
+ old_config = 0; /* Force the uart to be re-initialized. */
+
+ /* Reprogram the baud-rate generator. */
+ v850e_uart_set_speed (chan, new_speed);
+ }
+
+ if (! (old_config & V850E_UART_CONFIG_ENABLED)) {
+ /* If we are using the uart for the first time, start by
+ enabling it, which must be done before turning on any
+ other bits. */
+ V850E_UART_CONFIG (chan) = V850E_UART_CONFIG_INIT;
+ /* See the initial state. */
+ old_config = V850E_UART_CONFIG (chan);
+ }
+
+ if (new_config != old_config) {
+ /* Which of the TXE/RXE bits we'll temporarily turn off
+ before changing other control bits. */
+ unsigned temp_disable = 0;
+ /* Which of the TXE/RXE bits will be enabled. */
+ unsigned enable = 0;
+ unsigned changed_bits = new_config ^ old_config;
+
+ /* Which of RX/TX will be enabled in the new configuration. */
+ if (new_config & V850E_UART_CONFIG_RX_BITS)
+ enable |= (new_config & V850E_UART_CONFIG_RX_ENABLE);
+ if (new_config & V850E_UART_CONFIG_TX_BITS)
+ enable |= (new_config & V850E_UART_CONFIG_TX_ENABLE);
+
+ /* Figure out which of RX/TX needs to be disabled; note
+ that this will only happen if they're not already
+ disabled. */
+ if (changed_bits & V850E_UART_CONFIG_RX_BITS)
+ temp_disable
+ |= (old_config & V850E_UART_CONFIG_RX_ENABLE);
+ if (changed_bits & V850E_UART_CONFIG_TX_BITS)
+ temp_disable
+ |= (old_config & V850E_UART_CONFIG_TX_ENABLE);
+
+ /* We have to turn off RX and/or TX mode before changing
+ any associated control bits. */
+ if (temp_disable)
+ V850E_UART_CONFIG (chan) = old_config & ~temp_disable;
+
+ /* Write the new control bits, while RX/TX are disabled. */
+ if (changed_bits & ~enable)
+ V850E_UART_CONFIG (chan) = new_config & ~enable;
+
+ v850e_uart_config_delay (new_config, new_speed);
+
+ /* Write the final version, with enable bits turned on. */
+ V850E_UART_CONFIG (chan) = new_config;
+ }
+
+ local_irq_restore (flags);
+}
+
+
+/* Low-level console. */
+
+#ifdef CONFIG_V850E_UART_CONSOLE
+
+static void v850e_uart_cons_write (struct console *co,
+ const char *s, unsigned count)
+{
+ if (count > 0) {
+ unsigned chan = co->index;
+ unsigned irq = V850E_UART_TX_IRQ (chan);
+ int irq_was_enabled, irq_was_pending, flags;
+
+ /* We don't want to get `transmission completed'
+ interrupts, since we're busy-waiting, so we disable them
+ while sending (we don't disable interrupts entirely
+ because sending over a serial line is really slow). We
+ save the status of the tx interrupt and restore it when
+ we're done so that using printk doesn't interfere with
+ normal serial transmission (other than interleaving the
+ output, of course!). This should work correctly even if
+ this function is interrupted and the interrupt printks
+ something. */
+
+ /* Disable interrupts while fiddling with tx interrupt. */
+ local_irq_save (flags);
+ /* Get current tx interrupt status. */
+ irq_was_enabled = v850e_intc_irq_enabled (irq);
+ irq_was_pending = v850e_intc_irq_pending (irq);
+ /* Disable tx interrupt if necessary. */
+ if (irq_was_enabled)
+ v850e_intc_disable_irq (irq);
+ /* Turn interrupts back on. */
+ local_irq_restore (flags);
+
+ /* Send characters. */
+ while (count > 0) {
+ int ch = *s++;
+
+ if (ch == '\n') {
+ /* We don't have the benefit of a tty
+ driver, so translate NL into CR LF. */
+ v850e_uart_wait_for_xmit_ok (chan);
+ v850e_uart_putc (chan, '\r');
+ }
+
+ v850e_uart_wait_for_xmit_ok (chan);
+ v850e_uart_putc (chan, ch);
+
+ count--;
+ }
+
+ /* Restore saved tx interrupt status. */
+ if (irq_was_enabled) {
+ /* Wait for the last character we sent to be
+ completely transmitted (as we'll get an
+ interrupt interrupt at that point). */
+ v850e_uart_wait_for_xmit_done (chan);
+ /* Clear pending interrupts received due
+ to our transmission, unless there was already
+ one pending, in which case we want the
+ handler to be called. */
+ if (! irq_was_pending)
+ v850e_intc_clear_pending_irq (irq);
+ /* ... and then turn back on handling. */
+ v850e_intc_enable_irq (irq);
+ }
+ }
+}
+
+extern struct uart_driver v850e_uart_driver;
+static struct console v850e_uart_cons =
+{
+ .name = "ttyS",
+ .write = v850e_uart_cons_write,
+ .device = uart_console_device,
+ .flags = CON_PRINTBUFFER,
+ .cflag = V850E_UART_INIT_CFLAGS,
+ .index = -1,
+ .data = &v850e_uart_driver,
+};
+
+void v850e_uart_cons_init (unsigned chan)
+{
+ v850e_uart_configure (chan, V850E_UART_INIT_CFLAGS,
+ V850E_UART_INIT_BAUD);
+ v850e_uart_cons.index = chan;
+ register_console (&v850e_uart_cons);
+ printk ("Console: %s on-chip UART channel %d\n",
+ V850E_UART_CHIP_NAME, chan);
+}
+
+/* This is what the init code actually calls. */
+static int v850e_uart_console_init (void)
+{
+ v850e_uart_cons_init (V850E_UART_CONSOLE_CHANNEL);
+ return 0;
+}
+console_initcall(v850e_uart_console_init);
+
+#define V850E_UART_CONSOLE &v850e_uart_cons
+
+#else /* !CONFIG_V850E_UART_CONSOLE */
+#define V850E_UART_CONSOLE 0
+#endif /* CONFIG_V850E_UART_CONSOLE */
+
+/* TX/RX interrupt handlers. */
+
+static void v850e_uart_stop_tx (struct uart_port *port, unsigned tty_stop);
+
+void v850e_uart_tx (struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->info->xmit;
+ int stopped = uart_tx_stopped (port);
+
+ if (v850e_uart_xmit_ok (port->line)) {
+ int tx_ch;
+
+ if (port->x_char) {
+ tx_ch = port->x_char;
+ port->x_char = 0;
+ } else if (!uart_circ_empty (xmit) && !stopped) {
+ tx_ch = xmit->buf[xmit->tail];
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ } else
+ goto no_xmit;
+
+ v850e_uart_putc (port->line, tx_ch);
+ port->icount.tx++;
+
+ if (uart_circ_chars_pending (xmit) < WAKEUP_CHARS)
+ uart_write_wakeup (port);
+ }
+
+ no_xmit:
+ if (uart_circ_empty (xmit) || stopped)
+ v850e_uart_stop_tx (port, stopped);
+}
+
+static irqreturn_t v850e_uart_tx_irq(int irq, void *data, struct pt_regs *regs)
+{
+ struct uart_port *port = data;
+ v850e_uart_tx (port);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t v850e_uart_rx_irq(int irq, void *data, struct pt_regs *regs)
+{
+ struct uart_port *port = data;
+ unsigned ch_stat = TTY_NORMAL;
+ unsigned ch = v850e_uart_getc (port->line);
+ unsigned err = v850e_uart_err (port->line);
+
+ if (err) {
+ if (err & V850E_UART_ERR_OVERRUN) {
+ ch_stat = TTY_OVERRUN;
+ port->icount.overrun++;
+ } else if (err & V850E_UART_ERR_FRAME) {
+ ch_stat = TTY_FRAME;
+ port->icount.frame++;
+ } else if (err & V850E_UART_ERR_PARITY) {
+ ch_stat = TTY_PARITY;
+ port->icount.parity++;
+ }
+ }
+
+ port->icount.rx++;
+
+ tty_insert_flip_char (port->info->tty, ch, ch_stat);
+ tty_schedule_flip (port->info->tty);
+
+ return IRQ_HANDLED;
+}
+
+
+/* Control functions for the serial framework. */
+
+static void v850e_uart_nop (struct uart_port *port) { }
+static int v850e_uart_success (struct uart_port *port) { return 0; }
+
+static unsigned v850e_uart_tx_empty (struct uart_port *port)
+{
+ return TIOCSER_TEMT; /* Can't detect. */
+}
+
+static void v850e_uart_set_mctrl (struct uart_port *port, unsigned mctrl)
+{
+#ifdef V850E_UART_SET_RTS
+ V850E_UART_SET_RTS (port->line, (mctrl & TIOCM_RTS));
+#endif
+}
+
+static unsigned v850e_uart_get_mctrl (struct uart_port *port)
+{
+ /* We don't support DCD or DSR, so consider them permanently active. */
+ int mctrl = TIOCM_CAR | TIOCM_DSR;
+
+ /* We may support CTS. */
+#ifdef V850E_UART_CTS
+ mctrl |= V850E_UART_CTS(port->line) ? TIOCM_CTS : 0;
+#else
+ mctrl |= TIOCM_CTS;
+#endif
+
+ return mctrl;
+}
+
+static void v850e_uart_start_tx (struct uart_port *port, unsigned tty_start)
+{
+ v850e_intc_disable_irq (V850E_UART_TX_IRQ (port->line));
+ v850e_uart_tx (port);
+ v850e_intc_enable_irq (V850E_UART_TX_IRQ (port->line));
+}
+
+static void v850e_uart_stop_tx (struct uart_port *port, unsigned tty_stop)
+{
+ v850e_intc_disable_irq (V850E_UART_TX_IRQ (port->line));
+}
+
+static void v850e_uart_start_rx (struct uart_port *port)
+{
+ v850e_intc_enable_irq (V850E_UART_RX_IRQ (port->line));
+}
+
+static void v850e_uart_stop_rx (struct uart_port *port)
+{
+ v850e_intc_disable_irq (V850E_UART_RX_IRQ (port->line));
+}
+
+static void v850e_uart_break_ctl (struct uart_port *port, int break_ctl)
+{
+ /* Umm, do this later. */
+}
+
+static int v850e_uart_startup (struct uart_port *port)
+{
+ int err;
+
+ /* Alloc RX irq. */
+ err = request_irq (V850E_UART_RX_IRQ (port->line), v850e_uart_rx_irq,
+ SA_INTERRUPT, "v850e_uart", port);
+ if (err)
+ return err;
+
+ /* Alloc TX irq. */
+ err = request_irq (V850E_UART_TX_IRQ (port->line), v850e_uart_tx_irq,
+ SA_INTERRUPT, "v850e_uart", port);
+ if (err) {
+ free_irq (V850E_UART_RX_IRQ (port->line), port);
+ return err;
+ }
+
+ v850e_uart_start_rx (port);
+
+ return 0;
+}
+
+static void v850e_uart_shutdown (struct uart_port *port)
+{
+ /* Disable port interrupts. */
+ free_irq (V850E_UART_TX_IRQ (port->line), port);
+ free_irq (V850E_UART_RX_IRQ (port->line), port);
+
+ /* Turn off xmit/recv enable bits. */
+ V850E_UART_CONFIG (port->line)
+ &= ~(V850E_UART_CONFIG_TX_ENABLE
+ | V850E_UART_CONFIG_RX_ENABLE);
+ /* Then reset the channel. */
+ V850E_UART_CONFIG (port->line) = 0;
+}
+
+static void
+v850e_uart_set_termios (struct uart_port *port, struct termios *termios,
+ struct termios *old)
+{
+ unsigned cflags = termios->c_cflag;
+
+ /* Restrict flags to legal values. */
+ if ((cflags & CSIZE) != CS7 && (cflags & CSIZE) != CS8)
+ /* The new value of CSIZE is invalid, use the old value. */
+ cflags = (cflags & ~CSIZE)
+ | (old ? (old->c_cflag & CSIZE) : CS8);
+
+ termios->c_cflag = cflags;
+
+ v850e_uart_configure (port->line, cflags,
+ uart_get_baud_rate (port, termios, old,
+ v850e_uart_min_baud(),
+ v850e_uart_max_baud()));
+}
+
+static const char *v850e_uart_type (struct uart_port *port)
+{
+ return port->type == PORT_V850E_UART ? "v850e_uart" : 0;
+}
+
+static void v850e_uart_config_port (struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE)
+ port->type = PORT_V850E_UART;
+}
+
+static int
+v850e_uart_verify_port (struct uart_port *port, struct serial_struct *ser)
+{
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_V850E_UART)
+ return -EINVAL;
+ if (ser->irq != V850E_UART_TX_IRQ (port->line))
+ return -EINVAL;
+ return 0;
+}
+
+static struct uart_ops v850e_uart_ops = {
+ .tx_empty = v850e_uart_tx_empty,
+ .get_mctrl = v850e_uart_get_mctrl,
+ .set_mctrl = v850e_uart_set_mctrl,
+ .start_tx = v850e_uart_start_tx,
+ .stop_tx = v850e_uart_stop_tx,
+ .stop_rx = v850e_uart_stop_rx,
+ .enable_ms = v850e_uart_nop,
+ .break_ctl = v850e_uart_break_ctl,
+ .startup = v850e_uart_startup,
+ .shutdown = v850e_uart_shutdown,
+ .set_termios = v850e_uart_set_termios,
+ .type = v850e_uart_type,
+ .release_port = v850e_uart_nop,
+ .request_port = v850e_uart_success,
+ .config_port = v850e_uart_config_port,
+ .verify_port = v850e_uart_verify_port,
+};
+
+/* Initialization and cleanup. */
+
+static struct uart_driver v850e_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "v850e_uart",
+ .devfs_name = "tts/",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+ .minor = V850E_UART_MINOR_BASE,
+ .nr = V850E_UART_NUM_CHANNELS,
+ .cons = V850E_UART_CONSOLE,
+};
+
+
+static struct uart_port v850e_uart_ports[V850E_UART_NUM_CHANNELS];
+
+static int __init v850e_uart_init (void)
+{
+ int rval;
+
+ printk (KERN_INFO "%s on-chip UART\n", V850E_UART_CHIP_NAME);
+
+ rval = uart_register_driver (&v850e_uart_driver);
+ if (rval == 0) {
+ unsigned chan;
+
+ for (chan = 0; chan < V850E_UART_NUM_CHANNELS; chan++) {
+ struct uart_port *port = &v850e_uart_ports[chan];
+
+ memset (port, 0, sizeof *port);
+
+ port->ops = &v850e_uart_ops;
+ port->line = chan;
+ port->iotype = SERIAL_IO_MEM;
+ port->flags = UPF_BOOT_AUTOCONF;
+
+ /* We actually use multiple IRQs, but the serial
+ framework seems to mainly use this for
+ informational purposes anyway. Here we use the TX
+ irq. */
+ port->irq = V850E_UART_TX_IRQ (chan);
+
+ /* The serial framework doesn't really use these
+ membase/mapbase fields for anything useful, but
+ it requires that they be something non-zero to
+ consider the port `valid', and also uses them
+ for informational purposes. */
+ port->membase = (void *)V850E_UART_BASE_ADDR (chan);
+ port->mapbase = V850E_UART_BASE_ADDR (chan);
+
+ /* The framework insists on knowing the uart's master
+ clock freq, though it doesn't seem to do anything
+ useful for us with it. We must make it at least
+ higher than (the maximum baud rate * 16), otherwise
+ the framework will puke during its internal
+ calculations, and force the baud rate to be 9600.
+ To be accurate though, just repeat the calculation
+ we use when actually setting the speed. */
+ port->uartclk = v850e_uart_max_clock() * 16;
+
+ uart_add_one_port (&v850e_uart_driver, port);
+ }
+ }
+
+ return rval;
+}
+
+static void __exit v850e_uart_exit (void)
+{
+ unsigned chan;
+
+ for (chan = 0; chan < V850E_UART_NUM_CHANNELS; chan++)
+ uart_remove_one_port (&v850e_uart_driver,
+ &v850e_uart_ports[chan]);
+
+ uart_unregister_driver (&v850e_uart_driver);
+}
+
+module_init (v850e_uart_init);
+module_exit (v850e_uart_exit);
+
+MODULE_AUTHOR ("Miles Bader");
+MODULE_DESCRIPTION ("NEC " V850E_UART_CHIP_NAME " on-chip UART");
+MODULE_LICENSE ("GPL");
diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c
new file mode 100644
index 00000000000..ebc59c27a85
--- /dev/null
+++ b/drivers/serial/vr41xx_siu.c
@@ -0,0 +1,1100 @@
+/*
+ * Driver for NEC VR4100 series Serial Interface Unit.
+ *
+ * Copyright (C) 2004-2005 Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
+ *
+ * Based on drivers/serial/8250.c, by Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/config.h>
+
+#if defined(CONFIG_SERIAL_VR41XX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/console.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+
+#include <asm/io.h>
+#include <asm/vr41xx/siu.h>
+#include <asm/vr41xx/vr41xx.h>
+
+#define SIU_PORTS_MAX 2
+#define SIU_BAUD_BASE 1152000
+#define SIU_MAJOR 204
+#define SIU_MINOR_BASE 82
+
+#define RX_MAX_COUNT 256
+#define TX_MAX_COUNT 15
+
+#define SIUIRSEL 0x08
+ #define TMICMODE 0x20
+ #define TMICTX 0x10
+ #define IRMSEL 0x0c
+ #define IRMSEL_HP 0x08
+ #define IRMSEL_TEMIC 0x04
+ #define IRMSEL_SHARP 0x00
+ #define IRUSESEL 0x02
+ #define SIRSEL 0x01
+
+struct siu_port {
+ unsigned int type;
+ unsigned int irq;
+ unsigned long start;
+};
+
+static const struct siu_port siu_type1_ports[] = {
+ { .type = PORT_VR41XX_SIU,
+ .irq = SIU_IRQ,
+ .start = 0x0c000000UL, },
+};
+
+#define SIU_TYPE1_NR_PORTS (sizeof(siu_type1_ports) / sizeof(struct siu_port))
+
+static const struct siu_port siu_type2_ports[] = {
+ { .type = PORT_VR41XX_SIU,
+ .irq = SIU_IRQ,
+ .start = 0x0f000800UL, },
+ { .type = PORT_VR41XX_DSIU,
+ .irq = DSIU_IRQ,
+ .start = 0x0f000820UL, },
+};
+
+#define SIU_TYPE2_NR_PORTS (sizeof(siu_type2_ports) / sizeof(struct siu_port))
+
+static struct uart_port siu_uart_ports[SIU_PORTS_MAX];
+static uint8_t lsr_break_flag[SIU_PORTS_MAX];
+
+#define siu_read(port, offset) readb((port)->membase + (offset))
+#define siu_write(port, offset, value) writeb((value), (port)->membase + (offset))
+
+void vr41xx_select_siu_interface(siu_interface_t interface)
+{
+ struct uart_port *port;
+ unsigned long flags;
+ uint8_t irsel;
+
+ port = &siu_uart_ports[0];
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ irsel = siu_read(port, SIUIRSEL);
+ if (interface == SIU_INTERFACE_IRDA)
+ irsel |= SIRSEL;
+ else
+ irsel &= ~SIRSEL;
+ siu_write(port, SIUIRSEL, irsel);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+EXPORT_SYMBOL_GPL(vr41xx_select_siu_interface);
+
+void vr41xx_use_irda(irda_use_t use)
+{
+ struct uart_port *port;
+ unsigned long flags;
+ uint8_t irsel;
+
+ port = &siu_uart_ports[0];
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ irsel = siu_read(port, SIUIRSEL);
+ if (use == FIR_USE_IRDA)
+ irsel |= IRUSESEL;
+ else
+ irsel &= ~IRUSESEL;
+ siu_write(port, SIUIRSEL, irsel);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+EXPORT_SYMBOL_GPL(vr41xx_use_irda);
+
+void vr41xx_select_irda_module(irda_module_t module, irda_speed_t speed)
+{
+ struct uart_port *port;
+ unsigned long flags;
+ uint8_t irsel;
+
+ port = &siu_uart_ports[0];
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ irsel = siu_read(port, SIUIRSEL);
+ irsel &= ~(IRMSEL | TMICTX | TMICMODE);
+ switch (module) {
+ case SHARP_IRDA:
+ irsel |= IRMSEL_SHARP;
+ break;
+ case TEMIC_IRDA:
+ irsel |= IRMSEL_TEMIC | TMICMODE;
+ if (speed == IRDA_TX_4MBPS)
+ irsel |= TMICTX;
+ break;
+ case HP_IRDA:
+ irsel |= IRMSEL_HP;
+ break;
+ default:
+ break;
+ }
+ siu_write(port, SIUIRSEL, irsel);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+EXPORT_SYMBOL_GPL(vr41xx_select_irda_module);
+
+static inline void siu_clear_fifo(struct uart_port *port)
+{
+ siu_write(port, UART_FCR, UART_FCR_ENABLE_FIFO);
+ siu_write(port, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
+ UART_FCR_CLEAR_XMIT);
+ siu_write(port, UART_FCR, 0);
+}
+
+static inline int siu_probe_ports(void)
+{
+ switch (current_cpu_data.cputype) {
+ case CPU_VR4111:
+ case CPU_VR4121:
+ return SIU_TYPE1_NR_PORTS;
+ case CPU_VR4122:
+ case CPU_VR4131:
+ case CPU_VR4133:
+ return SIU_TYPE2_NR_PORTS;
+ }
+
+ return 0;
+}
+
+static inline unsigned long siu_port_size(struct uart_port *port)
+{
+ switch (port->type) {
+ case PORT_VR41XX_SIU:
+ return 11UL;
+ case PORT_VR41XX_DSIU:
+ return 8UL;
+ }
+
+ return 0;
+}
+
+static inline unsigned int siu_check_type(struct uart_port *port)
+{
+ switch (current_cpu_data.cputype) {
+ case CPU_VR4111:
+ case CPU_VR4121:
+ if (port->line == 0)
+ return PORT_VR41XX_SIU;
+ break;
+ case CPU_VR4122:
+ case CPU_VR4131:
+ case CPU_VR4133:
+ if (port->line == 0)
+ return PORT_VR41XX_SIU;
+ else if (port->line == 1)
+ return PORT_VR41XX_DSIU;
+ break;
+ }
+
+ return PORT_UNKNOWN;
+}
+
+static inline const char *siu_type_name(struct uart_port *port)
+{
+ switch (port->type) {
+ case PORT_VR41XX_SIU:
+ return "SIU";
+ case PORT_VR41XX_DSIU:
+ return "DSIU";
+ }
+
+ return "unknown";
+}
+
+static unsigned int siu_tx_empty(struct uart_port *port)
+{
+ uint8_t lsr;
+
+ lsr = siu_read(port, UART_LSR);
+ if (lsr & UART_LSR_TEMT)
+ return TIOCSER_TEMT;
+
+ return 0;
+}
+
+static void siu_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ uint8_t mcr = 0;
+
+ if (mctrl & TIOCM_DTR)
+ mcr |= UART_MCR_DTR;
+ if (mctrl & TIOCM_RTS)
+ mcr |= UART_MCR_RTS;
+ if (mctrl & TIOCM_OUT1)
+ mcr |= UART_MCR_OUT1;
+ if (mctrl & TIOCM_OUT2)
+ mcr |= UART_MCR_OUT2;
+ if (mctrl & TIOCM_LOOP)
+ mcr |= UART_MCR_LOOP;
+
+ siu_write(port, UART_MCR, mcr);
+}
+
+static unsigned int siu_get_mctrl(struct uart_port *port)
+{
+ uint8_t msr;
+ unsigned int mctrl = 0;
+
+ msr = siu_read(port, UART_MSR);
+ if (msr & UART_MSR_DCD)
+ mctrl |= TIOCM_CAR;
+ if (msr & UART_MSR_RI)
+ mctrl |= TIOCM_RNG;
+ if (msr & UART_MSR_DSR)
+ mctrl |= TIOCM_DSR;
+ if (msr & UART_MSR_CTS)
+ mctrl |= TIOCM_CTS;
+
+ return mctrl;
+}
+
+static void siu_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ unsigned long flags;
+ uint8_t ier;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ ier = siu_read(port, UART_IER);
+ ier &= ~UART_IER_THRI;
+ siu_write(port, UART_IER, ier);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void siu_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+ unsigned long flags;
+ uint8_t ier;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ ier = siu_read(port, UART_IER);
+ ier |= UART_IER_THRI;
+ siu_write(port, UART_IER, ier);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void siu_stop_rx(struct uart_port *port)
+{
+ unsigned long flags;
+ uint8_t ier;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ ier = siu_read(port, UART_IER);
+ ier &= ~UART_IER_RLSI;
+ siu_write(port, UART_IER, ier);
+
+ port->read_status_mask &= ~UART_LSR_DR;
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void siu_enable_ms(struct uart_port *port)
+{
+ unsigned long flags;
+ uint8_t ier;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ ier = siu_read(port, UART_IER);
+ ier |= UART_IER_MSI;
+ siu_write(port, UART_IER, ier);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void siu_break_ctl(struct uart_port *port, int ctl)
+{
+ unsigned long flags;
+ uint8_t lcr;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ lcr = siu_read(port, UART_LCR);
+ if (ctl == -1)
+ lcr |= UART_LCR_SBC;
+ else
+ lcr &= ~UART_LCR_SBC;
+ siu_write(port, UART_LCR, lcr);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static inline void receive_chars(struct uart_port *port, uint8_t *status,
+ struct pt_regs *regs)
+{
+ struct tty_struct *tty;
+ uint8_t lsr, ch;
+ char flag;
+ int max_count = RX_MAX_COUNT;
+
+ tty = port->info->tty;
+ lsr = *status;
+
+ do {
+ if (unlikely(tty->flip.count >= TTY_FLIPBUF_SIZE)) {
+ if (tty->low_latency)
+ tty_flip_buffer_push(tty);
+ }
+
+ ch = siu_read(port, UART_RX);
+ port->icount.rx++;
+ flag = TTY_NORMAL;
+
+#ifdef CONFIG_SERIAL_VR41XX_CONSOLE
+ lsr |= lsr_break_flag[port->line];
+ lsr_break_flag[port->line] = 0;
+#endif
+ if (unlikely(lsr & (UART_LSR_BI | UART_LSR_FE |
+ UART_LSR_PE | UART_LSR_OE))) {
+ if (lsr & UART_LSR_BI) {
+ lsr &= ~(UART_LSR_FE | UART_LSR_PE);
+ port->icount.brk++;
+
+ if (uart_handle_break(port))
+ goto ignore_char;
+ }
+
+ if (lsr & UART_LSR_FE)
+ port->icount.frame++;
+ if (lsr & UART_LSR_PE)
+ port->icount.parity++;
+ if (lsr & UART_LSR_OE)
+ port->icount.overrun++;
+
+ lsr &= port->read_status_mask;
+ if (lsr & UART_LSR_BI)
+ flag = TTY_BREAK;
+ if (lsr & UART_LSR_FE)
+ flag = TTY_FRAME;
+ if (lsr & UART_LSR_PE)
+ flag = TTY_PARITY;
+ }
+
+ if (uart_handle_sysrq_char(port, ch, regs))
+ goto ignore_char;
+ if ((lsr & port->ignore_status_mask) == 0)
+ tty_insert_flip_char(tty, ch, flag);
+ if ((lsr & UART_LSR_OE) && (tty->flip.count < TTY_FLIPBUF_SIZE))
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+
+ ignore_char:
+ lsr = siu_read(port, UART_LSR);
+ } while ((lsr & UART_LSR_DR) && (max_count-- > 0));
+
+ tty_flip_buffer_push(tty);
+
+ *status = lsr;
+}
+
+static inline void check_modem_status(struct uart_port *port)
+{
+ uint8_t msr;
+
+ msr = siu_read(port, UART_MSR);
+ if ((msr & UART_MSR_ANY_DELTA) == 0)
+ return;
+ if (msr & UART_MSR_DDCD)
+ uart_handle_dcd_change(port, msr & UART_MSR_DCD);
+ if (msr & UART_MSR_TERI)
+ port->icount.rng++;
+ if (msr & UART_MSR_DDSR)
+ port->icount.dsr++;
+ if (msr & UART_MSR_DCTS)
+ uart_handle_cts_change(port, msr & UART_MSR_CTS);
+
+ wake_up_interruptible(&port->info->delta_msr_wait);
+}
+
+static inline void transmit_chars(struct uart_port *port)
+{
+ struct circ_buf *xmit;
+ int max_count = TX_MAX_COUNT;
+
+ xmit = &port->info->xmit;
+
+ if (port->x_char) {
+ siu_write(port, UART_TX, port->x_char);
+ port->icount.tx++;
+ port->x_char = 0;
+ return;
+ }
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ siu_stop_tx(port, 0);
+ return;
+ }
+
+ do {
+ siu_write(port, UART_TX, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ } while (max_count-- > 0);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit))
+ siu_stop_tx(port, 0);
+}
+
+static irqreturn_t siu_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct uart_port *port;
+ uint8_t iir, lsr;
+
+ if (dev_id == NULL)
+ return IRQ_NONE;
+
+ port = (struct uart_port *)dev_id;
+
+ iir = siu_read(port, UART_IIR);
+ if (iir & UART_IIR_NO_INT)
+ return IRQ_NONE;
+
+ lsr = siu_read(port, UART_LSR);
+ if (lsr & UART_LSR_DR)
+ receive_chars(port, &lsr, regs);
+
+ check_modem_status(port);
+
+ if (lsr & UART_LSR_THRE)
+ transmit_chars(port);
+
+ return IRQ_HANDLED;
+}
+
+static int siu_startup(struct uart_port *port)
+{
+ int retval;
+
+ siu_clear_fifo(port);
+
+ (void)siu_read(port, UART_LSR);
+ (void)siu_read(port, UART_RX);
+ (void)siu_read(port, UART_IIR);
+ (void)siu_read(port, UART_MSR);
+
+ if (siu_read(port, UART_LSR) == 0xff)
+ return -ENODEV;
+
+ retval = request_irq(port->irq, siu_interrupt, 0, siu_type_name(port), port);
+ if (retval)
+ return retval;
+
+ if (port->type == PORT_VR41XX_DSIU)
+ vr41xx_enable_dsiuint(DSIUINT_ALL);
+
+ siu_write(port, UART_LCR, UART_LCR_WLEN8);
+
+ spin_lock_irq(&port->lock);
+ siu_set_mctrl(port, port->mctrl);
+ spin_unlock_irq(&port->lock);
+
+ siu_write(port, UART_IER, UART_IER_RLSI | UART_IER_RDI);
+
+ (void)siu_read(port, UART_LSR);
+ (void)siu_read(port, UART_RX);
+ (void)siu_read(port, UART_IIR);
+ (void)siu_read(port, UART_MSR);
+
+ return 0;
+}
+
+static void siu_shutdown(struct uart_port *port)
+{
+ unsigned long flags;
+ uint8_t lcr;
+
+ if (port->membase == NULL)
+ return;
+
+ siu_write(port, UART_IER, 0);
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ port->mctrl &= ~TIOCM_OUT2;
+ siu_set_mctrl(port, port->mctrl);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ lcr = siu_read(port, UART_LCR);
+ lcr &= ~UART_LCR_SBC;
+ siu_write(port, UART_LCR, lcr);
+
+ siu_clear_fifo(port);
+
+ (void)siu_read(port, UART_RX);
+
+ if (port->type == PORT_VR41XX_DSIU)
+ vr41xx_disable_dsiuint(DSIUINT_ALL);
+
+ free_irq(port->irq, port);
+}
+
+static void siu_set_termios(struct uart_port *port, struct termios *new,
+ struct termios *old)
+{
+ tcflag_t c_cflag, c_iflag;
+ uint8_t lcr, fcr, ier;
+ unsigned int baud, quot;
+ unsigned long flags;
+
+ c_cflag = new->c_cflag;
+ switch (c_cflag & CSIZE) {
+ case CS5:
+ lcr = UART_LCR_WLEN5;
+ break;
+ case CS6:
+ lcr = UART_LCR_WLEN6;
+ break;
+ case CS7:
+ lcr = UART_LCR_WLEN7;
+ break;
+ default:
+ lcr = UART_LCR_WLEN8;
+ break;
+ }
+
+ if (c_cflag & CSTOPB)
+ lcr |= UART_LCR_STOP;
+ if (c_cflag & PARENB)
+ lcr |= UART_LCR_PARITY;
+ if ((c_cflag & PARODD) != PARODD)
+ lcr |= UART_LCR_EPAR;
+ if (c_cflag & CMSPAR)
+ lcr |= UART_LCR_SPAR;
+
+ baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16);
+ quot = uart_get_divisor(port, baud);
+
+ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ uart_update_timeout(port, c_cflag, baud);
+
+ c_iflag = new->c_iflag;
+
+ port->read_status_mask = UART_LSR_THRE | UART_LSR_OE | UART_LSR_DR;
+ if (c_iflag & INPCK)
+ port->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+ if (c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= UART_LSR_BI;
+
+ port->ignore_status_mask = 0;
+ if (c_iflag & IGNPAR)
+ port->ignore_status_mask |= UART_LSR_FE | UART_LSR_PE;
+ if (c_iflag & IGNBRK) {
+ port->ignore_status_mask |= UART_LSR_BI;
+ if (c_iflag & IGNPAR)
+ port->ignore_status_mask |= UART_LSR_OE;
+ }
+
+ if ((c_cflag & CREAD) == 0)
+ port->ignore_status_mask |= UART_LSR_DR;
+
+ ier = siu_read(port, UART_IER);
+ ier &= ~UART_IER_MSI;
+ if (UART_ENABLE_MS(port, c_cflag))
+ ier |= UART_IER_MSI;
+ siu_write(port, UART_IER, ier);
+
+ siu_write(port, UART_LCR, lcr | UART_LCR_DLAB);
+
+ siu_write(port, UART_DLL, (uint8_t)quot);
+ siu_write(port, UART_DLM, (uint8_t)(quot >> 8));
+
+ siu_write(port, UART_LCR, lcr);
+
+ siu_write(port, UART_FCR, fcr);
+
+ siu_set_mctrl(port, port->mctrl);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void siu_pm(struct uart_port *port, unsigned int state, unsigned int oldstate)
+{
+ switch (state) {
+ case 0:
+ switch (port->type) {
+ case PORT_VR41XX_SIU:
+ vr41xx_supply_clock(SIU_CLOCK);
+ break;
+ case PORT_VR41XX_DSIU:
+ vr41xx_supply_clock(DSIU_CLOCK);
+ break;
+ }
+ break;
+ case 3:
+ switch (port->type) {
+ case PORT_VR41XX_SIU:
+ vr41xx_mask_clock(SIU_CLOCK);
+ break;
+ case PORT_VR41XX_DSIU:
+ vr41xx_mask_clock(DSIU_CLOCK);
+ break;
+ }
+ break;
+ }
+}
+
+static const char *siu_type(struct uart_port *port)
+{
+ return siu_type_name(port);
+}
+
+static void siu_release_port(struct uart_port *port)
+{
+ unsigned long size;
+
+ if (port->flags & UPF_IOREMAP) {
+ iounmap(port->membase);
+ port->membase = NULL;
+ }
+
+ size = siu_port_size(port);
+ release_mem_region(port->mapbase, size);
+}
+
+static int siu_request_port(struct uart_port *port)
+{
+ unsigned long size;
+ struct resource *res;
+
+ size = siu_port_size(port);
+ res = request_mem_region(port->mapbase, size, siu_type_name(port));
+ if (res == NULL)
+ return -EBUSY;
+
+ if (port->flags & UPF_IOREMAP) {
+ port->membase = ioremap(port->mapbase, size);
+ if (port->membase == NULL) {
+ release_resource(res);
+ return -ENOMEM;
+ }
+ }
+
+ return 0;
+}
+
+static void siu_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE) {
+ port->type = siu_check_type(port);
+ (void)siu_request_port(port);
+ }
+}
+
+static int siu_verify_port(struct uart_port *port, struct serial_struct *serial)
+{
+ if (port->type != PORT_VR41XX_SIU && port->type != PORT_VR41XX_DSIU)
+ return -EINVAL;
+ if (port->irq != serial->irq)
+ return -EINVAL;
+ if (port->iotype != serial->io_type)
+ return -EINVAL;
+ if (port->mapbase != (unsigned long)serial->iomem_base)
+ return -EINVAL;
+
+ return 0;
+}
+
+static struct uart_ops siu_uart_ops = {
+ .tx_empty = siu_tx_empty,
+ .set_mctrl = siu_set_mctrl,
+ .get_mctrl = siu_get_mctrl,
+ .stop_tx = siu_stop_tx,
+ .start_tx = siu_start_tx,
+ .stop_rx = siu_stop_rx,
+ .enable_ms = siu_enable_ms,
+ .break_ctl = siu_break_ctl,
+ .startup = siu_startup,
+ .shutdown = siu_shutdown,
+ .set_termios = siu_set_termios,
+ .pm = siu_pm,
+ .type = siu_type,
+ .release_port = siu_release_port,
+ .request_port = siu_request_port,
+ .config_port = siu_config_port,
+ .verify_port = siu_verify_port,
+};
+
+static int siu_init_ports(void)
+{
+ const struct siu_port *siu;
+ struct uart_port *port;
+ int i, num;
+
+ switch (current_cpu_data.cputype) {
+ case CPU_VR4111:
+ case CPU_VR4121:
+ siu = siu_type1_ports;
+ break;
+ case CPU_VR4122:
+ case CPU_VR4131:
+ case CPU_VR4133:
+ siu = siu_type2_ports;
+ break;
+ default:
+ return 0;
+ }
+
+ port = siu_uart_ports;
+ num = siu_probe_ports();
+ for (i = 0; i < num; i++) {
+ spin_lock_init(&port->lock);
+ port->irq = siu->irq;
+ port->uartclk = SIU_BAUD_BASE * 16;
+ port->fifosize = 16;
+ port->regshift = 0;
+ port->iotype = UPIO_MEM;
+ port->flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
+ port->type = siu->type;
+ port->line = i;
+ port->mapbase = siu->start;
+ siu++;
+ port++;
+ }
+
+ return num;
+}
+
+#ifdef CONFIG_SERIAL_VR41XX_CONSOLE
+
+static void early_set_termios(struct uart_port *port, struct termios *new,
+ struct termios *old)
+{
+ tcflag_t c_cflag;
+ uint8_t lcr;
+ unsigned int baud, quot;
+
+ c_cflag = new->c_cflag;
+ switch (c_cflag & CSIZE) {
+ case CS5:
+ lcr = UART_LCR_WLEN5;
+ break;
+ case CS6:
+ lcr = UART_LCR_WLEN6;
+ break;
+ case CS7:
+ lcr = UART_LCR_WLEN7;
+ break;
+ default:
+ lcr = UART_LCR_WLEN8;
+ break;
+ }
+
+ if (c_cflag & CSTOPB)
+ lcr |= UART_LCR_STOP;
+ if (c_cflag & PARENB)
+ lcr |= UART_LCR_PARITY;
+ if ((c_cflag & PARODD) != PARODD)
+ lcr |= UART_LCR_EPAR;
+ if (c_cflag & CMSPAR)
+ lcr |= UART_LCR_SPAR;
+
+ baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16);
+ quot = uart_get_divisor(port, baud);
+
+ siu_write(port, UART_LCR, lcr | UART_LCR_DLAB);
+
+ siu_write(port, UART_DLL, (uint8_t)quot);
+ siu_write(port, UART_DLM, (uint8_t)(quot >> 8));
+
+ siu_write(port, UART_LCR, lcr);
+}
+
+static struct uart_ops early_uart_ops = {
+ .set_termios = early_set_termios,
+};
+
+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+
+static void wait_for_xmitr(struct uart_port *port)
+{
+ int timeout = 10000;
+ uint8_t lsr, msr;
+
+ do {
+ lsr = siu_read(port, UART_LSR);
+ if (lsr & UART_LSR_BI)
+ lsr_break_flag[port->line] = UART_LSR_BI;
+
+ if ((lsr & BOTH_EMPTY) == BOTH_EMPTY)
+ break;
+ } while (timeout-- > 0);
+
+ if (port->flags & UPF_CONS_FLOW) {
+ timeout = 1000000;
+
+ do {
+ msr = siu_read(port, UART_MSR);
+ if ((msr & UART_MSR_CTS) != 0)
+ break;
+ } while (timeout-- > 0);
+ }
+}
+
+static void siu_console_write(struct console *con, const char *s, unsigned count)
+{
+ struct uart_port *port;
+ uint8_t ier;
+ unsigned i;
+
+ port = &siu_uart_ports[con->index];
+
+ ier = siu_read(port, UART_IER);
+ siu_write(port, UART_IER, 0);
+
+ for (i = 0; i < count && *s != '\0'; i++, s++) {
+ wait_for_xmitr(port);
+ siu_write(port, UART_TX, *s);
+ if (*s == '\n') {
+ wait_for_xmitr(port);
+ siu_write(port, UART_TX, '\r');
+ }
+ }
+
+ wait_for_xmitr(port);
+ siu_write(port, UART_IER, ier);
+}
+
+static int siu_console_setup(struct console *con, char *options)
+{
+ struct uart_port *port;
+ int baud = 9600;
+ int parity = 'n';
+ int bits = 8;
+ int flow = 'n';
+
+ if (con->index >= SIU_PORTS_MAX)
+ con->index = 0;
+
+ port = &siu_uart_ports[con->index];
+ if (port->membase == NULL) {
+ if (port->mapbase == 0)
+ return -ENODEV;
+ port->membase = (unsigned char __iomem *)KSEG1ADDR(port->mapbase);
+ }
+
+ vr41xx_select_siu_interface(SIU_INTERFACE_RS232C);
+
+ if (options != NULL)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(port, con, baud, parity, bits, flow);
+}
+
+static struct uart_driver siu_uart_driver;
+
+static struct console siu_console = {
+ .name = "ttyVR",
+ .write = siu_console_write,
+ .device = uart_console_device,
+ .setup = siu_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &siu_uart_driver,
+};
+
+static int __devinit siu_console_init(void)
+{
+ struct uart_port *port;
+ int num, i;
+
+ num = siu_init_ports();
+ if (num <= 0)
+ return -ENODEV;
+
+ for (i = 0; i < num; i++) {
+ port = &siu_uart_ports[i];
+ port->ops = &early_uart_ops;
+ }
+
+ register_console(&siu_console);
+
+ return 0;
+}
+
+console_initcall(siu_console_init);
+
+#define SERIAL_VR41XX_CONSOLE &siu_console
+#else
+#define SERIAL_VR41XX_CONSOLE NULL
+#endif
+
+static struct uart_driver siu_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "SIU",
+ .dev_name = "ttyVR",
+ .devfs_name = "ttvr/",
+ .major = SIU_MAJOR,
+ .minor = SIU_MINOR_BASE,
+ .cons = SERIAL_VR41XX_CONSOLE,
+};
+
+static int siu_probe(struct device *dev)
+{
+ struct uart_port *port;
+ int num, i, retval;
+
+ num = siu_init_ports();
+ if (num <= 0)
+ return -ENODEV;
+
+ siu_uart_driver.nr = num;
+ retval = uart_register_driver(&siu_uart_driver);
+ if (retval)
+ return retval;
+
+ for (i = 0; i < num; i++) {
+ port = &siu_uart_ports[i];
+ port->ops = &siu_uart_ops;
+ port->dev = dev;
+
+ retval = uart_add_one_port(&siu_uart_driver, port);
+ if (retval)
+ break;
+ }
+
+ if (i == 0 && retval < 0) {
+ uart_unregister_driver(&siu_uart_driver);
+ return retval;
+ }
+
+ return 0;
+}
+
+static int siu_remove(struct device *dev)
+{
+ struct uart_port *port;
+ int i;
+
+ for (i = 0; i < siu_uart_driver.nr; i++) {
+ port = &siu_uart_ports[i];
+ if (port->dev == dev) {
+ uart_remove_one_port(&siu_uart_driver, port);
+ port->dev = NULL;
+ }
+ }
+
+ uart_unregister_driver(&siu_uart_driver);
+
+ return 0;
+}
+
+static int siu_suspend(struct device *dev, u32 state, u32 level)
+{
+ struct uart_port *port;
+ int i;
+
+ if (level != SUSPEND_DISABLE)
+ return 0;
+
+ for (i = 0; i < siu_uart_driver.nr; i++) {
+ port = &siu_uart_ports[i];
+ if ((port->type == PORT_VR41XX_SIU ||
+ port->type == PORT_VR41XX_DSIU) && port->dev == dev)
+ uart_suspend_port(&siu_uart_driver, port);
+
+ }
+
+ return 0;
+}
+
+static int siu_resume(struct device *dev, u32 level)
+{
+ struct uart_port *port;
+ int i;
+
+ if (level != RESUME_ENABLE)
+ return 0;
+
+ for (i = 0; i < siu_uart_driver.nr; i++) {
+ port = &siu_uart_ports[i];
+ if ((port->type == PORT_VR41XX_SIU ||
+ port->type == PORT_VR41XX_DSIU) && port->dev == dev)
+ uart_resume_port(&siu_uart_driver, port);
+ }
+
+ return 0;
+}
+
+static struct platform_device *siu_platform_device;
+
+static struct device_driver siu_device_driver = {
+ .name = "SIU",
+ .bus = &platform_bus_type,
+ .probe = siu_probe,
+ .remove = siu_remove,
+ .suspend = siu_suspend,
+ .resume = siu_resume,
+};
+
+static int __devinit vr41xx_siu_init(void)
+{
+ int retval;
+
+ siu_platform_device = platform_device_register_simple("SIU", -1, NULL, 0);
+ if (IS_ERR(siu_platform_device))
+ return PTR_ERR(siu_platform_device);
+
+ retval = driver_register(&siu_device_driver);
+ if (retval < 0)
+ platform_device_unregister(siu_platform_device);
+
+ return retval;
+}
+
+static void __devexit vr41xx_siu_exit(void)
+{
+ driver_unregister(&siu_device_driver);
+
+ platform_device_unregister(siu_platform_device);
+}
+
+module_init(vr41xx_siu_init);
+module_exit(vr41xx_siu_exit);