aboutsummaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/68328serial.c9
-rw-r--r--drivers/serial/au1x00_uart.c11
-rw-r--r--drivers/serial/crisv10.c68
-rw-r--r--drivers/serial/m32r_sio.c15
-rw-r--r--drivers/serial/sunsu.c13
5 files changed, 43 insertions, 73 deletions
diff --git a/drivers/serial/68328serial.c b/drivers/serial/68328serial.c
index 7f0f35a05dc..b88a7c1158a 100644
--- a/drivers/serial/68328serial.c
+++ b/drivers/serial/68328serial.c
@@ -101,8 +101,6 @@ struct tty_driver *serial_driver;
#define RS_ISR_PASS_LIMIT 256
-#define _INLINE_ inline
-
static void change_speed(struct m68k_serial *info);
/*
@@ -262,7 +260,7 @@ static void batten_down_hatches(void)
/* Drop into the debugger */
}
-static _INLINE_ void status_handle(struct m68k_serial *info, unsigned short status)
+static void status_handle(struct m68k_serial *info, unsigned short status)
{
#if 0
if(status & DCD) {
@@ -289,7 +287,8 @@ static _INLINE_ void status_handle(struct m68k_serial *info, unsigned short stat
return;
}
-static _INLINE_ void receive_chars(struct m68k_serial *info, struct pt_regs *regs, unsigned short rx)
+static void receive_chars(struct m68k_serial *info, struct pt_regs *regs,
+ unsigned short rx)
{
struct tty_struct *tty = info->tty;
m68328_uart *uart = &uart_addr[info->line];
@@ -359,7 +358,7 @@ clear_and_exit:
return;
}
-static _INLINE_ void transmit_chars(struct m68k_serial *info)
+static void transmit_chars(struct m68k_serial *info)
{
m68328_uart *uart = &uart_addr[info->line];
diff --git a/drivers/serial/au1x00_uart.c b/drivers/serial/au1x00_uart.c
index 29f94bbb79b..948880ac587 100644
--- a/drivers/serial/au1x00_uart.c
+++ b/drivers/serial/au1x00_uart.c
@@ -133,13 +133,12 @@ static const struct serial_uart_config uart_config[PORT_MAX_8250+1] = {
{ "AU1X00_UART",16, UART_CLEAR_FIFO | UART_USE_FIFO },
};
-static _INLINE_ unsigned int serial_in(struct uart_8250_port *up, int offset)
+static unsigned int serial_in(struct uart_8250_port *up, int offset)
{
return au_readl((unsigned long)up->port.membase + offset);
}
-static _INLINE_ void
-serial_out(struct uart_8250_port *up, int offset, int value)
+static void serial_out(struct uart_8250_port *up, int offset, int value)
{
au_writel(value, (unsigned long)up->port.membase + offset);
}
@@ -237,7 +236,7 @@ static void serial8250_enable_ms(struct uart_port *port)
serial_out(up, UART_IER, up->ier);
}
-static _INLINE_ void
+static void
receive_chars(struct uart_8250_port *up, int *status, struct pt_regs *regs)
{
struct tty_struct *tty = up->port.info->tty;
@@ -312,7 +311,7 @@ receive_chars(struct uart_8250_port *up, int *status, struct pt_regs *regs)
spin_lock(&up->port.lock);
}
-static _INLINE_ void transmit_chars(struct uart_8250_port *up)
+static void transmit_chars(struct uart_8250_port *up)
{
struct circ_buf *xmit = &up->port.info->xmit;
int count;
@@ -346,7 +345,7 @@ static _INLINE_ void transmit_chars(struct uart_8250_port *up)
serial8250_stop_tx(&up->port);
}
-static _INLINE_ void check_modem_status(struct uart_8250_port *up)
+static void check_modem_status(struct uart_8250_port *up)
{
int status;
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index be12623d854..89700141f87 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -481,8 +481,6 @@ static char *serial_version = "$Revision: 1.25 $";
#include "serial_compat.h"
#endif
-#define _INLINE_ inline
-
struct tty_driver *serial_driver;
/* serial subtype definitions */
@@ -591,8 +589,6 @@ static void rs_throttle(struct tty_struct * tty);
static void rs_wait_until_sent(struct tty_struct *tty, int timeout);
static int rs_write(struct tty_struct * tty, int from_user,
const unsigned char *buf, int count);
-extern _INLINE_ int rs_raw_write(struct tty_struct * tty, int from_user,
- const unsigned char *buf, int count);
#ifdef CONFIG_ETRAX_RS485
static int e100_write_rs485(struct tty_struct * tty, int from_user,
const unsigned char *buf, int count);
@@ -1538,8 +1534,7 @@ e100_enable_rxdma_irq(struct e100_serial *info)
/* the tx DMA uses only dma_descr interrupt */
-static _INLINE_ void
-e100_disable_txdma_irq(struct e100_serial *info)
+static void e100_disable_txdma_irq(struct e100_serial *info)
{
#ifdef SERIAL_DEBUG_INTR
printk("txdma_irq(%d): 0\n",info->line);
@@ -1548,8 +1543,7 @@ e100_disable_txdma_irq(struct e100_serial *info)
*R_IRQ_MASK2_CLR = info->irq;
}
-static _INLINE_ void
-e100_enable_txdma_irq(struct e100_serial *info)
+static void e100_enable_txdma_irq(struct e100_serial *info)
{
#ifdef SERIAL_DEBUG_INTR
printk("txdma_irq(%d): 1\n",info->line);
@@ -1558,8 +1552,7 @@ e100_enable_txdma_irq(struct e100_serial *info)
*R_IRQ_MASK2_SET = info->irq;
}
-static _INLINE_ void
-e100_disable_txdma_channel(struct e100_serial *info)
+static void e100_disable_txdma_channel(struct e100_serial *info)
{
unsigned long flags;
@@ -1599,8 +1592,7 @@ e100_disable_txdma_channel(struct e100_serial *info)
}
-static _INLINE_ void
-e100_enable_txdma_channel(struct e100_serial *info)
+static void e100_enable_txdma_channel(struct e100_serial *info)
{
unsigned long flags;
@@ -1625,8 +1617,7 @@ e100_enable_txdma_channel(struct e100_serial *info)
restore_flags(flags);
}
-static _INLINE_ void
-e100_disable_rxdma_channel(struct e100_serial *info)
+static void e100_disable_rxdma_channel(struct e100_serial *info)
{
unsigned long flags;
@@ -1665,8 +1656,7 @@ e100_disable_rxdma_channel(struct e100_serial *info)
}
-static _INLINE_ void
-e100_enable_rxdma_channel(struct e100_serial *info)
+static void e100_enable_rxdma_channel(struct e100_serial *info)
{
unsigned long flags;
@@ -1913,9 +1903,7 @@ rs_start(struct tty_struct *tty)
* This routine is used by the interrupt handler to schedule
* processing in the software interrupt portion of the driver.
*/
-static _INLINE_ void
-rs_sched_event(struct e100_serial *info,
- int event)
+static void rs_sched_event(struct e100_serial *info, int event)
{
if (info->event & (1 << event))
return;
@@ -2155,8 +2143,9 @@ add_char_and_flag(struct e100_serial *info, unsigned char data, unsigned char fl
return 1;
}
-extern _INLINE_ unsigned int
-handle_descr_data(struct e100_serial *info, struct etrax_dma_descr *descr, unsigned int recvl)
+static unsigned int handle_descr_data(struct e100_serial *info,
+ struct etrax_dma_descr *descr,
+ unsigned int recvl)
{
struct etrax_recv_buffer *buffer = phys_to_virt(descr->buf) - sizeof *buffer;
@@ -2182,8 +2171,7 @@ handle_descr_data(struct e100_serial *info, struct etrax_dma_descr *descr, unsig
return recvl;
}
-static _INLINE_ unsigned int
-handle_all_descr_data(struct e100_serial *info)
+static unsigned int handle_all_descr_data(struct e100_serial *info)
{
struct etrax_dma_descr *descr;
unsigned int recvl;
@@ -2230,8 +2218,7 @@ handle_all_descr_data(struct e100_serial *info)
return ret;
}
-static _INLINE_ void
-receive_chars_dma(struct e100_serial *info)
+static void receive_chars_dma(struct e100_serial *info)
{
struct tty_struct *tty;
unsigned char rstat;
@@ -2292,8 +2279,7 @@ receive_chars_dma(struct e100_serial *info)
*info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart);
}
-static _INLINE_ int
-start_recv_dma(struct e100_serial *info)
+static int start_recv_dma(struct e100_serial *info)
{
struct etrax_dma_descr *descr = info->rec_descr;
struct etrax_recv_buffer *buffer;
@@ -2348,11 +2334,6 @@ start_receive(struct e100_serial *info)
}
-static _INLINE_ void
-status_handle(struct e100_serial *info, unsigned short status)
-{
-}
-
/* the bits in the MASK2 register are laid out like this:
DMAI_EOP DMAI_DESCR DMAO_EOP DMAO_DESCR
where I is the input channel and O is the output channel for the port.
@@ -2454,8 +2435,7 @@ rec_interrupt(int irq, void *dev_id, struct pt_regs * regs)
return IRQ_RETVAL(handled);
} /* rec_interrupt */
-static _INLINE_ int
-force_eop_if_needed(struct e100_serial *info)
+static int force_eop_if_needed(struct e100_serial *info)
{
/* We check data_avail bit to determine if data has
* arrived since last time
@@ -2499,8 +2479,7 @@ force_eop_if_needed(struct e100_serial *info)
return 1;
}
-extern _INLINE_ void
-flush_to_flip_buffer(struct e100_serial *info)
+static void flush_to_flip_buffer(struct e100_serial *info)
{
struct tty_struct *tty;
struct etrax_recv_buffer *buffer;
@@ -2611,8 +2590,7 @@ flush_to_flip_buffer(struct e100_serial *info)
tty_flip_buffer_push(tty);
}
-static _INLINE_ void
-check_flush_timeout(struct e100_serial *info)
+static void check_flush_timeout(struct e100_serial *info)
{
/* Flip what we've got (if we can) */
flush_to_flip_buffer(info);
@@ -2741,7 +2719,7 @@ TODO: The break will be delayed until an F or V character is received.
*/
-extern _INLINE_
+static
struct e100_serial * handle_ser_rx_interrupt_no_dma(struct e100_serial *info)
{
unsigned long data_read;
@@ -2875,8 +2853,7 @@ more_data:
return info;
}
-extern _INLINE_
-struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info)
+static struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info)
{
unsigned char rstat;
@@ -2995,7 +2972,7 @@ struct e100_serial* handle_ser_rx_interrupt(struct e100_serial *info)
return info;
} /* handle_ser_rx_interrupt */
-extern _INLINE_ void handle_ser_tx_interrupt(struct e100_serial *info)
+static void handle_ser_tx_interrupt(struct e100_serial *info)
{
unsigned long flags;
@@ -3621,9 +3598,8 @@ rs_flush_chars(struct tty_struct *tty)
restore_flags(flags);
}
-extern _INLINE_ int
-rs_raw_write(struct tty_struct * tty, int from_user,
- const unsigned char *buf, int count)
+static int rs_raw_write(struct tty_struct * tty, int from_user,
+ const unsigned char *buf, int count)
{
int c, ret = 0;
struct e100_serial *info = (struct e100_serial *)tty->driver_data;
@@ -4710,7 +4686,7 @@ rs_open(struct tty_struct *tty, struct file * filp)
* /proc fs routines....
*/
-extern _INLINE_ int line_info(char *buf, struct e100_serial *info)
+static int line_info(char *buf, struct e100_serial *info)
{
char stat_buf[30];
int ret;
diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
index 876bc5e027b..e9c10c0a30f 100644
--- a/drivers/serial/m32r_sio.c
+++ b/drivers/serial/m32r_sio.c
@@ -248,17 +248,17 @@ static void sio_error(int *status)
#endif /* CONFIG_SERIAL_M32R_PLDSIO */
-static _INLINE_ unsigned int sio_in(struct uart_sio_port *up, int offset)
+static unsigned int sio_in(struct uart_sio_port *up, int offset)
{
return __sio_in(up->port.iobase + offset);
}
-static _INLINE_ void sio_out(struct uart_sio_port *up, int offset, int value)
+static void sio_out(struct uart_sio_port *up, int offset, int value)
{
__sio_out(value, up->port.iobase + offset);
}
-static _INLINE_ unsigned int serial_in(struct uart_sio_port *up, int offset)
+static unsigned int serial_in(struct uart_sio_port *up, int offset)
{
if (!offset)
return 0;
@@ -266,8 +266,7 @@ static _INLINE_ unsigned int serial_in(struct uart_sio_port *up, int offset)
return __sio_in(offset);
}
-static _INLINE_ void
-serial_out(struct uart_sio_port *up, int offset, int value)
+static void serial_out(struct uart_sio_port *up, int offset, int value)
{
if (!offset)
return;
@@ -326,8 +325,8 @@ static void m32r_sio_enable_ms(struct uart_port *port)
serial_out(up, UART_IER, up->ier);
}
-static _INLINE_ void receive_chars(struct uart_sio_port *up, int *status,
- struct pt_regs *regs)
+static void receive_chars(struct uart_sio_port *up, int *status,
+ struct pt_regs *regs)
{
struct tty_struct *tty = up->port.info->tty;
unsigned char ch;
@@ -400,7 +399,7 @@ static _INLINE_ void receive_chars(struct uart_sio_port *up, int *status,
tty_flip_buffer_push(tty);
}
-static _INLINE_ void transmit_chars(struct uart_sio_port *up)
+static void transmit_chars(struct uart_sio_port *up)
{
struct circ_buf *xmit = &up->port.info->xmit;
int count;
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 7fc3d3b41d1..9fe2283d91e 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -102,9 +102,7 @@ struct uart_sunsu_port {
#endif
};
-#define _INLINE_
-
-static _INLINE_ unsigned int serial_in(struct uart_sunsu_port *up, int offset)
+static unsigned int serial_in(struct uart_sunsu_port *up, int offset)
{
offset <<= up->port.regshift;
@@ -121,8 +119,7 @@ static _INLINE_ unsigned int serial_in(struct uart_sunsu_port *up, int offset)
}
}
-static _INLINE_ void
-serial_out(struct uart_sunsu_port *up, int offset, int value)
+static void serial_out(struct uart_sunsu_port *up, int offset, int value)
{
#ifndef CONFIG_SPARC64
/*
@@ -316,7 +313,7 @@ static void sunsu_enable_ms(struct uart_port *port)
spin_unlock_irqrestore(&up->port.lock, flags);
}
-static _INLINE_ struct tty_struct *
+static struct tty_struct *
receive_chars(struct uart_sunsu_port *up, unsigned char *status, struct pt_regs *regs)
{
struct tty_struct *tty = up->port.info->tty;
@@ -395,7 +392,7 @@ receive_chars(struct uart_sunsu_port *up, unsigned char *status, struct pt_regs
return tty;
}
-static _INLINE_ void transmit_chars(struct uart_sunsu_port *up)
+static void transmit_chars(struct uart_sunsu_port *up)
{
struct circ_buf *xmit = &up->port.info->xmit;
int count;
@@ -431,7 +428,7 @@ static _INLINE_ void transmit_chars(struct uart_sunsu_port *up)
__stop_tx(up);
}
-static _INLINE_ void check_modem_status(struct uart_sunsu_port *up)
+static void check_modem_status(struct uart_sunsu_port *up)
{
int status;