diff options
Diffstat (limited to 'drivers/serial')
| -rw-r--r-- | drivers/serial/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/serial/atmel_serial.c | 17 | ||||
| -rw-r--r-- | drivers/serial/crisv10.c | 4 | ||||
| -rw-r--r-- | drivers/serial/crisv10.h | 2 | ||||
| -rw-r--r-- | drivers/serial/netx-serial.c | 4 | ||||
| -rw-r--r-- | drivers/serial/sh-sci.c | 62 | ||||
| -rw-r--r-- | drivers/serial/sh-sci.h | 112 |
7 files changed, 80 insertions, 125 deletions
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index c94d3c4b752..579d63a81aa 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -1276,7 +1276,7 @@ config SERIAL_SGI_IOC3 say Y or M. Otherwise, say N. config SERIAL_NETX - bool "NetX serial port support" + tristate "NetX serial port support" depends on ARM && ARCH_NETX select SERIAL_CORE help @@ -1288,7 +1288,7 @@ config SERIAL_NETX config SERIAL_NETX_CONSOLE bool "Console on NetX serial port" - depends on SERIAL_NETX + depends on SERIAL_NETX=y select SERIAL_CORE_CONSOLE help If you have enabled the serial port on the Hilscher NetX SoC diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 61fb8b6d19a..d5efd6c7790 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -1258,6 +1258,8 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, atmel_port->clk = clk_get(&pdev->dev, "usart"); clk_enable(atmel_port->clk); port->uartclk = clk_get_rate(atmel_port->clk); + clk_disable(atmel_port->clk); + /* only enable clock when USART is in use */ } atmel_port->use_dma_rx = data->use_dma_rx; @@ -1379,6 +1381,8 @@ static int __init atmel_console_setup(struct console *co, char *options) return -ENODEV; } + clk_enable(atmel_ports[co->index].clk); + UART_PUT_IDR(port, -1); UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX); UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN); @@ -1403,7 +1407,7 @@ static struct console atmel_console = { .data = &atmel_uart, }; -#define ATMEL_CONSOLE_DEVICE &atmel_console +#define ATMEL_CONSOLE_DEVICE (&atmel_console) /* * Early console initialization (before VM subsystem initialized). @@ -1534,6 +1538,15 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev) if (ret) goto err_add_port; + if (atmel_is_console_port(&port->uart) + && ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) { + /* + * The serial core enabled the clock for us, so undo + * the clk_enable() in atmel_console_setup() + */ + clk_disable(port->clk); + } + device_init_wakeup(&pdev->dev, 1); platform_set_drvdata(pdev, port); @@ -1544,7 +1557,6 @@ err_add_port: port->rx_ring.buf = NULL; err_alloc_ring: if (!atmel_is_console_port(&port->uart)) { - clk_disable(port->clk); clk_put(port->clk); port->clk = NULL; } @@ -1568,7 +1580,6 @@ static int __devexit atmel_serial_remove(struct platform_device *pdev) /* "port" is allocated statically, so we shouldn't free it */ - clk_disable(atmel_port->clk); clk_put(atmel_port->clk); return ret; diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c index 211c21797ce..8b2c619a09f 100644 --- a/drivers/serial/crisv10.c +++ b/drivers/serial/crisv10.c @@ -34,14 +34,14 @@ static char *serial_version = "$Revision: 1.25 $"; #include <asm/system.h> #include <linux/delay.h> -#include <asm/arch/svinto.h> +#include <arch/svinto.h> /* non-arch dependent serial structures are in linux/serial.h */ #include <linux/serial.h> /* while we keep our own stuff (struct e100_serial) in a local .h file */ #include "crisv10.h" #include <asm/fasttimer.h> -#include <asm/arch/io_interface_mux.h> +#include <arch/io_interface_mux.h> #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER #ifndef CONFIG_ETRAX_FAST_TIMER diff --git a/drivers/serial/crisv10.h b/drivers/serial/crisv10.h index e3c5c8c3c09..f36a729280b 100644 --- a/drivers/serial/crisv10.h +++ b/drivers/serial/crisv10.h @@ -10,7 +10,7 @@ #include <linux/circ_buf.h> #include <asm/termios.h> #include <asm/dma.h> -#include <asm/arch/io_interface_mux.h> +#include <arch/io_interface_mux.h> /* Software state per channel */ diff --git a/drivers/serial/netx-serial.c b/drivers/serial/netx-serial.c index 3f489329e8d..3e5dda8518b 100644 --- a/drivers/serial/netx-serial.c +++ b/drivers/serial/netx-serial.c @@ -42,8 +42,6 @@ #define SERIAL_NX_MAJOR 204 #define MINOR_START 170 -#ifdef CONFIG_SERIAL_NETX_CONSOLE - enum uart_regs { UART_DR = 0x00, UART_SR = 0x04, @@ -528,6 +526,8 @@ static struct netx_port netx_ports[] = { } }; +#ifdef CONFIG_SERIAL_NETX_CONSOLE + static void netx_console_putchar(struct uart_port *port, int ch) { while (readl(port->membase + UART_FR) & FR_BUSY); diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index f0658d2c45b..165fc010978 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -144,9 +144,9 @@ static void put_char(struct uart_port *port, char c) status = sci_in(port, SCxSR); } while (!(status & SCxSR_TDxE(port))); - sci_out(port, SCxTDR, c); sci_in(port, SCxSR); /* Dummy read */ sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); + sci_out(port, SCxTDR, c); spin_unlock_irqrestore(&port->lock, flags); } @@ -250,8 +250,7 @@ static inline void h8300_sci_disable(struct uart_port *port) } #endif -#if defined(SCI_ONLY) || defined(SCI_AND_SCIF) && \ - defined(__H8300H__) || defined(__H8300S__) +#if defined(__H8300H__) || defined(__H8300S__) static void sci_init_pins_sci(struct uart_port* port, unsigned int cflag) { int ch = (port->mapbase - SMR0) >> 3; @@ -285,11 +284,6 @@ static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag) #define sci_init_pins_irda NULL #endif -#ifdef SCI_ONLY -#define sci_init_pins_scif NULL -#endif - -#if defined(SCIF_ONLY) || defined(SCI_AND_SCIF) #if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) static void sci_init_pins_scif(struct uart_port* port, unsigned int cflag) { @@ -449,7 +443,6 @@ static inline int scif_rxroom(struct uart_port *port) return sci_in(port, SCFDR) & SCIF_RFDC_MASK; } #endif -#endif /* SCIF_ONLY || SCI_AND_SCIF */ static inline int sci_txroom(struct uart_port *port) { @@ -485,12 +478,10 @@ static void sci_transmit_chars(struct uart_port *port) return; } -#ifndef SCI_ONLY - if (port->type == PORT_SCIF) - count = scif_txroom(port); - else -#endif + if (port->type == PORT_SCI) count = sci_txroom(port); + else + count = scif_txroom(port); do { unsigned char c; @@ -519,12 +510,10 @@ static void sci_transmit_chars(struct uart_port *port) } else { ctrl = sci_in(port, SCSCR); -#if !defined(SCI_ONLY) - if (port->type == PORT_SCIF) { + if (port->type != PORT_SCI) { sci_in(port, SCxSR); /* Dummy read */ sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port)); } -#endif ctrl |= SCI_CTRL_FLAGS_TIE; sci_out(port, SCSCR, ctrl); @@ -547,12 +536,10 @@ static inline void sci_receive_chars(struct uart_port *port) return; while (1) { -#if !defined(SCI_ONLY) - if (port->type == PORT_SCIF) - count = scif_rxroom(port); - else -#endif + if (port->type == PORT_SCI) count = sci_rxroom(port); + else + count = scif_rxroom(port); /* Don't copy more bytes than there is room for in the buffer */ count = tty_buffer_request_room(tty, count); @@ -727,7 +714,7 @@ static inline int sci_handle_breaks(struct uart_port *port) #if defined(SCIF_ORER) /* XXX: Handle SCIF overrun error */ - if (port->type == PORT_SCIF && (sci_in(port, SCLSR) & SCIF_ORER) != 0) { + if (port->type != PORT_SCI && (sci_in(port, SCLSR) & SCIF_ORER) != 0) { sci_out(port, SCLSR, 0); if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) { copied++; @@ -810,26 +797,27 @@ static irqreturn_t sci_br_interrupt(int irq, void *ptr) static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) { - unsigned short ssr_status, scr_status; - struct uart_port *port = ptr; + unsigned short ssr_status, scr_status; + struct uart_port *port = ptr; + irqreturn_t ret = IRQ_NONE; ssr_status = sci_in(port,SCxSR); scr_status = sci_in(port,SCSCR); /* Tx Interrupt */ - if ((ssr_status & 0x0020) && (scr_status & 0x0080)) - sci_tx_interrupt(irq, ptr); + if ((ssr_status & 0x0020) && (scr_status & SCI_CTRL_FLAGS_TIE)) + ret = sci_tx_interrupt(irq, ptr); /* Rx Interrupt */ - if ((ssr_status & 0x0002) && (scr_status & 0x0040)) - sci_rx_interrupt(irq, ptr); + if ((ssr_status & 0x0002) && (scr_status & SCI_CTRL_FLAGS_RIE)) + ret = sci_rx_interrupt(irq, ptr); /* Error Interrupt */ - if ((ssr_status & 0x0080) && (scr_status & 0x0400)) - sci_er_interrupt(irq, ptr); + if ((ssr_status & 0x0080) && (scr_status & SCI_CTRL_FLAGS_REIE)) + ret = sci_er_interrupt(irq, ptr); /* Break Interrupt */ - if ((ssr_status & 0x0010) && (scr_status & 0x0200)) - sci_br_interrupt(irq, ptr); + if ((ssr_status & 0x0010) && (scr_status & SCI_CTRL_FLAGS_REIE)) + ret = sci_br_interrupt(irq, ptr); - return IRQ_HANDLED; + return ret; } #if defined(CONFIG_CPU_FREQ) && defined(CONFIG_HAVE_CLK) @@ -1054,10 +1042,8 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ -#if !defined(SCI_ONLY) - if (port->type == PORT_SCIF) + if (port->type != PORT_SCI) sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); -#endif smr_val = sci_in(port, SCSMR) & 3; if ((termios->c_cflag & CSIZE) == CS7) @@ -1099,6 +1085,7 @@ static const char *sci_type(struct uart_port *port) case PORT_SCI: return "sci"; case PORT_SCIF: return "scif"; case PORT_IRDA: return "irda"; + case PORT_SCIFA: return "scifa"; } return NULL; @@ -1126,6 +1113,7 @@ static void sci_config_port(struct uart_port *port, int flags) s->init_pins = sci_init_pins_sci; break; case PORT_SCIF: + case PORT_SCIFA: s->init_pins = sci_init_pins_scif; break; case PORT_IRDA: diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index 7cd28b22680..9f33b064172 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -16,7 +16,6 @@ # define SCPCR 0xA4000116 /* 16 bit SCI and SCIF */ # define SCPDR 0xA4000136 /* 8 bit SCI and SCIF */ # define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ -# define SCI_AND_SCIF #elif defined(CONFIG_CPU_SUBTYPE_SH7705) # define SCIF0 0xA4400000 # define SCIF2 0xA4410000 @@ -30,17 +29,15 @@ * SCIF0 (0xA4400000) -> Internal clock, SCK pin as serial clock output */ # define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0 -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) # define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */ -# define SCIF_ONLY #define SCIF_ORER 0x0200 /* overrun error bit */ #elif defined(CONFIG_SH_RTS7751R2D) +# define SCSPTR1 0xFFE0001C /* 8 bit SCIF */ # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \ defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ @@ -53,28 +50,24 @@ # define SCSCR_INIT(port) (((port)->type == PORT_SCI) ? \ 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \ 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ ) -# define SCI_AND_SCIF #elif defined(CONFIG_CPU_SUBTYPE_SH7760) # define SCSPTR0 0xfe600024 /* 16 bit SCIF */ # define SCSPTR1 0xfe610024 /* 16 bit SCIF */ # define SCSPTR2 0xfe620024 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) # define SCSPTR0 0xA4400000 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define PACR 0xa4050100 # define PBCR 0xa4050102 # define SCSCR_INIT(port) 0x3B -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7343) # define SCSPTR0 0xffe00010 /* 16 bit SCIF */ # define SCSPTR1 0xffe10010 /* 16 bit SCIF */ # define SCSPTR2 0xffe20010 /* 16 bit SCIF */ # define SCSPTR3 0xffe30010 /* 16 bit SCIF */ # define SCSCR_INIT(port) 0x32 /* TIE=0,RIE=0,TE=1,RE=1,REIE=0,CKE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7722) # define PADR 0xA4050120 # define PSDR 0xA405013e @@ -82,7 +75,6 @@ # define PSCR 0xA405011E # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7366) # define SCPDR0 0xA405013E /* 16 bit SCIF0 PSDR */ # define SCSPTR0 SCPDR0 @@ -97,12 +89,10 @@ # define SCSPTR5 0xa4050128 # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH4_202) # define SCSPTR2 0xffe80020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) # define SCIF_BASE_ADDR 0x01030000 # define SCIF_ADDR_SH5 PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR @@ -111,14 +101,11 @@ # define SCSPTR2 ((port->mapbase)+SCIF_PTR2_OFFS) /* 16 bit SCIF */ # define SCLSR2 ((port->mapbase)+SCIF_LSR2_OFFS) /* 16 bit SCIF */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0, TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_H83007) || defined(CONFIG_H83068) # define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ -# define SCI_ONLY # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port) #elif defined(CONFIG_H8S2678) # define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ -# define SCI_ONLY # define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port) #elif defined(CONFIG_CPU_SUBTYPE_SH7763) # define SCSPTR0 0xffe00024 /* 16 bit SCIF */ @@ -126,20 +113,17 @@ # define SCSPTR2 0xffe10020 /* 16 bit SCIF/IRDA */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7770) # define SCSPTR0 0xff923020 /* 16 bit SCIF */ # define SCSPTR1 0xff924020 /* 16 bit SCIF */ # define SCSPTR2 0xff925020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x3c /* TIE=0,RIE=0,TE=1,RE=1,REIE=1,cke=2 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7780) # define SCSPTR0 0xffe00024 /* 16 bit SCIF */ # define SCSPTR1 0xffe10024 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* Overrun error bit */ # define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7785) # define SCSPTR0 0xffea0024 /* 16 bit SCIF */ # define SCSPTR1 0xffeb0024 /* 16 bit SCIF */ @@ -149,7 +133,6 @@ # define SCSPTR5 0xffef0024 /* 16 bit SCIF */ # define SCIF_OPER 0x0001 /* Overrun error bit */ # define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \ defined(CONFIG_CPU_SUBTYPE_SH7206) || \ defined(CONFIG_CPU_SUBTYPE_SH7263) @@ -158,14 +141,12 @@ # define SCSPTR2 0xfffe9020 /* 16 bit SCIF */ # define SCSPTR3 0xfffe9820 /* 16 bit SCIF */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7619) # define SCSPTR0 0xf8400020 /* 16 bit SCIF */ # define SCSPTR1 0xf8410020 /* 16 bit SCIF */ # define SCSPTR2 0xf8420020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* overrun error bit */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SHX3) # define SCSPTR0 0xffc30020 /* 16 bit SCIF */ # define SCSPTR1 0xffc40020 /* 16 bit SCIF */ @@ -173,7 +154,6 @@ # define SCSPTR3 0xffc60020 /* 16 bit SCIF */ # define SCIF_ORER 0x0001 /* Overrun error bit */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ -# define SCIF_ONLY #else # error CPU subtype not defined #endif @@ -186,6 +166,7 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7750) || \ defined(CONFIG_CPU_SUBTYPE_SH7091) || \ defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ + defined(CONFIG_CPU_SUBTYPE_SH7722) || \ defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ defined(CONFIG_CPU_SUBTYPE_SH7751) || \ defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ @@ -244,55 +225,28 @@ # define SCIF_TXROOM_MAX 16 #endif -#if defined(SCI_ONLY) -# define SCxSR_TEND(port) SCI_TEND -# define SCxSR_ERRORS(port) SCI_ERRORS -# define SCxSR_RDxF(port) SCI_RDRF -# define SCxSR_TDxE(port) SCI_TDRE -# define SCxSR_ORER(port) SCI_ORER -# define SCxSR_FER(port) SCI_FER -# define SCxSR_PER(port) SCI_PER -# define SCxSR_BRK(port) 0x00 -# define SCxSR_RDxF_CLEAR(port) 0xbc -# define SCxSR_ERROR_CLEAR(port) 0xc4 -# define SCxSR_TDxE_CLEAR(port) 0x78 -# define SCxSR_BREAK_CLEAR(port) 0xc4 -#elif defined(SCIF_ONLY) -# define SCxSR_TEND(port) SCIF_TEND -# define SCxSR_ERRORS(port) SCIF_ERRORS -# define SCxSR_RDxF(port) SCIF_RDF -# define SCxSR_TDxE(port) SCIF_TDFE +#define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND) +#define SCxSR_ERRORS(port) (((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS) +#define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF) +#define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE) +#define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER) +#define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER) +#define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK) + #if defined(CONFIG_CPU_SUBTYPE_SH7705) -# define SCxSR_ORER(port) SCIF_ORER +# define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : SCIF_ORER) #else -# define SCxSR_ORER(port) 0x0000 +# define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : 0x0000) #endif -# define SCxSR_FER(port) SCIF_FER -# define SCxSR_PER(port) SCIF_PER -# define SCxSR_BRK(port) SCIF_BRK + #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) -# define SCxSR_RDxF_CLEAR(port) (sci_in(port,SCxSR)&0xfffc) -# define SCxSR_ERROR_CLEAR(port) (sci_in(port,SCxSR)&0xfd73) -# define SCxSR_TDxE_CLEAR(port) (sci_in(port,SCxSR)&0xffdf) -# define SCxSR_BREAK_CLEAR(port) (sci_in(port,SCxSR)&0xffe3) -#else -/* SH7705 can also use this, clearing is same between 7705 and 7709 */ -# define SCxSR_RDxF_CLEAR(port) 0x00fc -# define SCxSR_ERROR_CLEAR(port) 0x0073 -# define SCxSR_TDxE_CLEAR(port) 0x00df -# define SCxSR_BREAK_CLEAR(port) 0x00e3 -#endif +# define SCxSR_RDxF_CLEAR(port) (sci_in(port, SCxSR) & 0xfffc) +# define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73) +# define SCxSR_TDxE_CLEAR(port) (sci_in(port, SCxSR) & 0xffdf) +# define SCxSR_BREAK_CLEAR(port) (sci_in(port, SCxSR) & 0xffe3) #else -# define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND) -# define SCxSR_ERRORS(port) (((port)->type == PORT_SCI) ? SCI_ERRORS : SCIF_ERRORS) -# define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF) -# define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE) -# define SCxSR_ORER(port) (((port)->type == PORT_SCI) ? SCI_ORER : 0x0000) -# define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER) -# define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER) -# define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK) # define SCxSR_RDxF_CLEAR(port) (((port)->type == PORT_SCI) ? 0xbc : 0x00fc) # define SCxSR_ERROR_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x0073) # define SCxSR_TDxE_CLEAR(port) (((port)->type == PORT_SCI) ? 0x78 : 0x00df) @@ -335,18 +289,18 @@ #define CPU_SCIx_FNS(name, sci_offset, sci_size, scif_offset, scif_size)\ static inline unsigned int sci_##name##_in(struct uart_port *port) \ { \ - if (port->type == PORT_SCI) { \ - SCI_IN(sci_size, sci_offset) \ - } else { \ - SCI_IN(scif_size, scif_offset); \ + if (port->type == PORT_SCIF) { \ + SCI_IN(scif_size, scif_offset) \ + } else { /* PORT_SCI or PORT_SCIFA */ \ + SCI_IN(sci_size, sci_offset); \ } \ } \ static inline void sci_##name##_out(struct uart_port *port, unsigned int value) \ { \ - if (port->type == PORT_SCI) { \ - SCI_OUT(sci_size, sci_offset, value) \ - } else { \ - SCI_OUT(scif_size, scif_offset, value); \ + if (port->type == PORT_SCIF) { \ + SCI_OUT(scif_size, scif_offset, value) \ + } else { /* PORT_SCI or PORT_SCIFA */ \ + SCI_OUT(sci_size, sci_offset, value); \ } \ } @@ -574,18 +528,20 @@ static inline int sci_rxd_in(struct uart_port *port) defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ - defined(CONFIG_CPU_SUBTYPE_SH7091) || \ - defined(CONFIG_CPU_SUBTYPE_SH4_202) + defined(CONFIG_CPU_SUBTYPE_SH7091) static inline int sci_rxd_in(struct uart_port *port) { -#ifndef SCIF_ONLY if (port->mapbase == 0xffe00000) return ctrl_inb(SCSPTR1)&0x01 ? 1 : 0; /* SCI */ -#endif -#ifndef SCI_ONLY if (port->mapbase == 0xffe80000) return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ -#endif + return 1; +} +#elif defined(CONFIG_CPU_SUBTYPE_SH4_202) +static inline int sci_rxd_in(struct uart_port *port) +{ + if (port->mapbase == 0xffe80000) + return ctrl_inw(SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7760) @@ -651,7 +607,7 @@ static inline int sci_rxd_in(struct uart_port *port) #elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103) static inline int sci_rxd_in(struct uart_port *port) { - return sci_in(port, SCSPTR)&0x0001 ? 1 : 0; /* SCIF */ + return sci_in(port, SCSPTR2)&0x0001 ? 1 : 0; /* SCIF */ } #elif defined(__H8300H__) || defined(__H8300S__) static inline int sci_rxd_in(struct uart_port *port) |