aboutsummaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/Kconfig2
-rw-r--r--drivers/serial/atmel_serial.c9
-rw-r--r--drivers/serial/mcf.c2
-rw-r--r--drivers/serial/serial_core.c76
4 files changed, 46 insertions, 43 deletions
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 9be11b0963f..aa9d3a4c2d5 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1374,7 +1374,7 @@ config SERIAL_BFIN_SPORT
depends on BLACKFIN && EXPERIMENTAL
select SERIAL_CORE
help
- Enble support SPORT emulate UART on Blackfin series.
+ Enable SPORT emulate UART on Blackfin series.
To compile this driver as a module, choose M here: the
module will be called bfin_sport_uart.
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 8f58f7ff0dd..b3497d7e535 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -1020,7 +1020,8 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
/* Get current mode register */
mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL
- | ATMEL_US_NBSTOP | ATMEL_US_PAR);
+ | ATMEL_US_NBSTOP | ATMEL_US_PAR
+ | ATMEL_US_USMODE);
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
quot = uart_get_divisor(port, baud);
@@ -1065,6 +1066,12 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
} else
mode |= ATMEL_US_PAR_NONE;
+ /* hardware handshake (RTS/CTS) */
+ if (termios->c_cflag & CRTSCTS)
+ mode |= ATMEL_US_USMODE_HWHS;
+ else
+ mode |= ATMEL_US_USMODE_NORMAL;
+
spin_lock_irqsave(&port->lock, flags);
port->read_status_mask = ATMEL_US_OVRE;
diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c
index 56841fe5f48..0eefb07beba 100644
--- a/drivers/serial/mcf.c
+++ b/drivers/serial/mcf.c
@@ -513,7 +513,7 @@ static int __init mcf_console_setup(struct console *co, char *options)
int parity = 'n';
int flow = 'n';
- if ((co->index >= 0) && (co->index <= MCF_MAXPORTS))
+ if ((co->index < 0) || (co->index >= MCF_MAXPORTS))
co->index = 0;
port = &mcf_ports[co->index].port;
if (port->membase == 0)
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 42f4e66fcca..b0bb29d804a 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -27,6 +27,8 @@
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/console.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/serial_core.h>
#include <linux/smp_lock.h>
#include <linux/device.h>
@@ -1682,20 +1684,20 @@ static const char *uart_type(struct uart_port *port)
#ifdef CONFIG_PROC_FS
-static int uart_line_info(char *buf, struct uart_driver *drv, int i)
+static void uart_line_info(struct seq_file *m, struct uart_driver *drv, int i)
{
struct uart_state *state = drv->state + i;
int pm_state;
struct uart_port *port = state->port;
char stat_buf[32];
unsigned int status;
- int mmio, ret;
+ int mmio;
if (!port)
- return 0;
+ return;
mmio = port->iotype >= UPIO_MEM;
- ret = sprintf(buf, "%d: uart:%s %s%08llX irq:%d",
+ seq_printf(m, "%d: uart:%s %s%08llX irq:%d",
port->line, uart_type(port),
mmio ? "mmio:0x" : "port:",
mmio ? (unsigned long long)port->mapbase
@@ -1703,8 +1705,8 @@ static int uart_line_info(char *buf, struct uart_driver *drv, int i)
port->irq);
if (port->type == PORT_UNKNOWN) {
- strcat(buf, "\n");
- return ret + 1;
+ seq_putc(m, '\n');
+ return;
}
if (capable(CAP_SYS_ADMIN)) {
@@ -1719,19 +1721,19 @@ static int uart_line_info(char *buf, struct uart_driver *drv, int i)
uart_change_pm(state, pm_state);
mutex_unlock(&state->mutex);
- ret += sprintf(buf + ret, " tx:%d rx:%d",
+ seq_printf(m, " tx:%d rx:%d",
port->icount.tx, port->icount.rx);
if (port->icount.frame)
- ret += sprintf(buf + ret, " fe:%d",
+ seq_printf(m, " fe:%d",
port->icount.frame);
if (port->icount.parity)
- ret += sprintf(buf + ret, " pe:%d",
+ seq_printf(m, " pe:%d",
port->icount.parity);
if (port->icount.brk)
- ret += sprintf(buf + ret, " brk:%d",
+ seq_printf(m, " brk:%d",
port->icount.brk);
if (port->icount.overrun)
- ret += sprintf(buf + ret, " oe:%d",
+ seq_printf(m, " oe:%d",
port->icount.overrun);
#define INFOBIT(bit, str) \
@@ -1753,45 +1755,39 @@ static int uart_line_info(char *buf, struct uart_driver *drv, int i)
STATBIT(TIOCM_RNG, "|RI");
if (stat_buf[0])
stat_buf[0] = ' ';
- strcat(stat_buf, "\n");
- ret += sprintf(buf + ret, stat_buf);
- } else {
- strcat(buf, "\n");
- ret++;
+ seq_puts(m, stat_buf);
}
+ seq_putc(m, '\n');
#undef STATBIT
#undef INFOBIT
- return ret;
}
-static int uart_read_proc(char *page, char **start, off_t off,
- int count, int *eof, void *data)
+static int uart_proc_show(struct seq_file *m, void *v)
{
- struct tty_driver *ttydrv = data;
+ struct tty_driver *ttydrv = m->private;
struct uart_driver *drv = ttydrv->driver_state;
- int i, len = 0, l;
- off_t begin = 0;
+ int i;
- len += sprintf(page, "serinfo:1.0 driver%s%s revision:%s\n",
+ seq_printf(m, "serinfo:1.0 driver%s%s revision:%s\n",
"", "", "");
- for (i = 0; i < drv->nr && len < PAGE_SIZE - 96; i++) {
- l = uart_line_info(page + len, drv, i);
- len += l;
- if (len + begin > off + count)
- goto done;
- if (len + begin < off) {
- begin += len;
- len = 0;
- }
- }
- *eof = 1;
- done:
- if (off >= len + begin)
- return 0;
- *start = page + (off - begin);
- return (count < begin + len - off) ? count : (begin + len - off);
+ for (i = 0; i < drv->nr; i++)
+ uart_line_info(m, drv, i);
+ return 0;
}
+
+static int uart_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, uart_proc_show, PDE(inode)->data);
+}
+
+static const struct file_operations uart_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = uart_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
#endif
#if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(CONFIG_CONSOLE_POLL)
@@ -2299,7 +2295,7 @@ static const struct tty_operations uart_ops = {
.break_ctl = uart_break_ctl,
.wait_until_sent= uart_wait_until_sent,
#ifdef CONFIG_PROC_FS
- .read_proc = uart_read_proc,
+ .proc_fops = &uart_proc_fops,
#endif
.tiocmget = uart_tiocmget,
.tiocmset = uart_tiocmset,
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-28 05:57:50 +0000