diff options
Diffstat (limited to 'drivers/serial')
| -rw-r--r-- | drivers/serial/8250.c | 3 | ||||
| -rw-r--r-- | drivers/serial/cpm_uart/cpm_uart_cpm1.c | 32 | ||||
| -rw-r--r-- | drivers/serial/s3c2410.c | 5 | ||||
| -rw-r--r-- | drivers/serial/serial_core.c | 14 |
4 files changed, 46 insertions, 8 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 9224fc3184e..7e8fc7c1d4c 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -2061,7 +2061,8 @@ static void __init serial8250_isa_init_ports(void) up->port.ops = &serial8250_pops; } - for (i = 0, up = serial8250_ports; i < ARRAY_SIZE(old_serial_port); + for (i = 0, up = serial8250_ports; + i < ARRAY_SIZE(old_serial_port) && i < UART_NR; i++, up++) { up->port.iobase = old_serial_port[i].port; up->port.irq = irq_canonicalize(old_serial_port[i].irq); diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c index de26cf7b003..7911912f50c 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c @@ -94,12 +94,42 @@ void smc1_lineif(struct uart_cpm_port *pinfo) ((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits; } +#ifdef CONFIG_MPC885ADS + /* Enable SMC1 transceivers */ + { + volatile uint __iomem *bcsr1 = ioremap(BCSR1, 4); + uint tmp; + + tmp = in_be32(bcsr1); + tmp &= ~BCSR1_RS232EN_1; + out_be32(bcsr1, tmp); + iounmap(bcsr1); + } +#endif + pinfo->brg = 1; } void smc2_lineif(struct uart_cpm_port *pinfo) { - /* XXX SMC2: insert port configuration here */ +#ifdef CONFIG_MPC885ADS + volatile cpm8xx_t *cp = cpmp; + volatile uint __iomem *bcsr1; + uint tmp; + + cp->cp_pepar |= 0x00000c00; + cp->cp_pedir &= ~0x00000c00; + cp->cp_peso &= ~0x00000400; + cp->cp_peso |= 0x00000800; + + /* Enable SMC2 transceivers */ + bcsr1 = ioremap(BCSR1, 4); + tmp = in_be32(bcsr1); + tmp &= ~BCSR1_RS232EN_2; + out_be32(bcsr1, tmp); + iounmap(bcsr1); +#endif + pinfo->brg = 2; } diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c index 5c4678478b1..7365d4b50b9 100644 --- a/drivers/serial/s3c2410.c +++ b/drivers/serial/s3c2410.c @@ -522,14 +522,11 @@ static void s3c24xx_serial_shutdown(struct uart_port *port) static int s3c24xx_serial_startup(struct uart_port *port) { struct s3c24xx_uart_port *ourport = to_ourport(port); - unsigned long flags; int ret; dbg("s3c24xx_serial_startup: port=%p (%08lx,%p)\n", port->mapbase, port->membase); - local_irq_save(flags); - rx_enabled(port) = 1; ret = request_irq(RX_IRQ(port), @@ -563,12 +560,10 @@ static int s3c24xx_serial_startup(struct uart_port *port) /* the port reset code should have done the correct * register setup for the port controls */ - local_irq_restore(flags); return ret; err: s3c24xx_serial_shutdown(port); - local_irq_restore(flags); return ret; } diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 139863a787f..54699c3a00a 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1808,6 +1808,12 @@ uart_set_options(struct uart_port *port, struct console *co, struct termios termios; int i; + /* + * Ensure that the serial console lock is initialised + * early. + */ + spin_lock_init(&port->lock); + memset(&termios, 0, sizeof(struct termios)); termios.c_cflag = CREAD | HUPCL | CLOCAL; @@ -2196,10 +2202,16 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port) state->port = port; - spin_lock_init(&port->lock); port->cons = drv->cons; port->info = state->info; + /* + * If this port is a console, then the spinlock is already + * initialised. + */ + if (!uart_console(port)) + spin_lock_init(&port->lock); + uart_configure_port(drv, state, port); /* |