diff options
Diffstat (limited to 'drivers/serial')
| -rw-r--r-- | drivers/serial/s3c2410.c | 69 |
1 files changed, 69 insertions, 0 deletions
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c index 36b5fcc9f46..bcf0fdb9096 100644 --- a/drivers/serial/s3c2410.c +++ b/drivers/serial/s3c2410.c @@ -26,6 +26,7 @@ #include <plat/regs-serial.h> #include <mach/regs-gpio.h> +#include <mach/regs-clock.h> /* structures */ @@ -936,6 +937,69 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = { #endif }; +static void s3c24xx_serial_force_debug_port_up(void) +{ + struct s3c24xx_uart_port *ourport = &s3c24xx_serial_ports[ + CONFIG_DEBUG_S3C_UART]; + struct s3c24xx_uart_clksrc *clksrc = NULL; + struct clk *clk = NULL; + unsigned long tmp; + + s3c24xx_serial_getclk(&ourport->port, &clksrc, &clk, 115200); + + tmp = __raw_readl(S3C2410_CLKCON); + + /* re-start uart clocks */ + tmp |= S3C2410_CLKCON_UART0; + tmp |= S3C2410_CLKCON_UART1; + tmp |= S3C2410_CLKCON_UART2; + + __raw_writel(tmp, S3C2410_CLKCON); + udelay(10); + + s3c24xx_serial_setsource(&ourport->port, clksrc); + + if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) { + clk_disable(ourport->baudclk); + ourport->baudclk = NULL; + } + + clk_enable(clk); + + ourport->clksrc = clksrc; + ourport->baudclk = clk; +} + +static void s3c2410_printascii(const char *sz) +{ + struct s3c24xx_uart_port *ourport = &s3c24xx_serial_ports[ + CONFIG_DEBUG_S3C_UART]; + struct uart_port *port = &ourport->port; + + /* 8 N 1 */ + wr_regl(port, S3C2410_ULCON, (rd_regl(port, S3C2410_ULCON)) | 3); + /* polling mode */ + wr_regl(port, S3C2410_UCON, (rd_regl(port, S3C2410_UCON) & ~0xc0f) | 5); + /* disable FIFO */ + wr_regl(port, S3C2410_UFCON, (rd_regl(port, S3C2410_UFCON) & ~0x01)); + /* fix baud rate */ + wr_regl(port, S3C2410_UBRDIV, 26); + + while (*sz) { + int timeout = 10000000; + + /* spin on it being busy */ + while ((!(rd_regl(port, S3C2410_UTRSTAT) & 2)) && timeout--) + ; + + /* transmit register */ + wr_regl(port, S3C2410_UTXH, *sz); + + sz++; + } +} + + /* s3c24xx_serial_resetport * * wrapper to call the specific reset for this port (reset the fifos @@ -1113,6 +1177,11 @@ static int s3c24xx_serial_resume(struct platform_device *dev) static int s3c24xx_serial_init(struct platform_driver *drv, struct s3c24xx_uart_info *info) { + /* set up the emergency debug UART functions */ + + printk_emergency_debug_spew_init = s3c24xx_serial_force_debug_port_up; + printk_emergency_debug_spew_send_string = s3c2410_printascii; + dbg("s3c24xx_serial_init(%p,%p)\n", drv, info); return platform_driver_register(drv); } |