diff options
Diffstat (limited to 'drivers/ssb/driver_pcicore.c')
| -rw-r--r-- | drivers/ssb/driver_pcicore.c | 45 |
1 files changed, 38 insertions, 7 deletions
diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c index 2faaa906d5d..6d99a988005 100644 --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -11,6 +11,7 @@ #include <linux/ssb/ssb.h> #include <linux/pci.h> #include <linux/delay.h> +#include <linux/ssb/ssb_embedded.h> #include "ssb_private.h" @@ -27,6 +28,18 @@ void pcicore_write32(struct ssb_pcicore *pc, u16 offset, u32 value) ssb_write32(pc->dev, offset, value); } +static inline +u16 pcicore_read16(struct ssb_pcicore *pc, u16 offset) +{ + return ssb_read16(pc->dev, offset); +} + +static inline +void pcicore_write16(struct ssb_pcicore *pc, u16 offset, u16 value) +{ + ssb_write16(pc->dev, offset, value); +} + /************************************************** * Code for hostmode operation. **************************************************/ @@ -66,6 +79,7 @@ int pcibios_plat_dev_init(struct pci_dev *d) base = &ssb_pcicore_pcibus_iobase; else base = &ssb_pcicore_pcibus_membase; + res->flags |= IORESOURCE_PCI_FIXED; if (res->end) { size = res->end - res->start + 1; if (*base & (size - 1)) @@ -88,10 +102,12 @@ int pcibios_plat_dev_init(struct pci_dev *d) static void __init ssb_fixup_pcibridge(struct pci_dev *dev) { + u8 lat; + if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0) return; - ssb_printk(KERN_INFO "PCI: fixing up bridge\n"); + ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev)); /* Enable PCI bridge bus mastering and memory space */ pci_set_master(dev); @@ -101,7 +117,10 @@ static void __init ssb_fixup_pcibridge(struct pci_dev *dev) pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3); /* Make sure our latency is high enough to handle the devices behind us */ - pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xa8); + lat = 168; + ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n", + pci_name(dev), lat); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); } DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_fixup_pcibridge); @@ -117,8 +136,10 @@ static u32 get_cfgspace_addr(struct ssb_pcicore *pc, u32 addr = 0; u32 tmp; - if (unlikely(pc->cardbusmode && dev > 1)) + /* We do only have one cardbus device behind the bridge. */ + if (pc->cardbusmode && (dev >= 1)) goto out; + if (bus == 0) { /* Type 0 transaction */ if (unlikely(dev >= SSB_PCI_SLOT_MAX)) @@ -279,14 +300,14 @@ static struct resource ssb_pcicore_mem_resource = { .name = "SSB PCIcore external memory", .start = SSB_PCI_DMA, .end = SSB_PCI_DMA + SSB_PCI_DMA_SZ - 1, - .flags = IORESOURCE_MEM, + .flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED, }; static struct resource ssb_pcicore_io_resource = { .name = "SSB PCIcore external I/O", .start = 0x100, .end = 0x7FF, - .flags = IORESOURCE_IO, + .flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED, }; static struct pci_controller ssb_pcicore_controller = { @@ -318,7 +339,16 @@ static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc) pcicore_write32(pc, SSB_PCICORE_ARBCTL, val); udelay(1); /* Assertion time demanded by the PCI standard */ - /*TODO cardbus mode */ + if (pc->dev->bus->has_cardbus_slot) { + ssb_dprintk(KERN_INFO PFX "CardBus slot detected\n"); + pc->cardbusmode = 1; + /* GPIO 1 resets the bridge */ + ssb_gpio_out(pc->dev->bus, 1, 1); + ssb_gpio_outen(pc->dev->bus, 1, 1); + pcicore_write16(pc, SSB_PCICORE_SPROM(0), + pcicore_read16(pc, SSB_PCICORE_SPROM(0)) + | 0x0400); + } /* 64MB I/O window */ pcicore_write32(pc, SSB_PCICORE_SBTOPCI0, @@ -344,7 +374,8 @@ static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc) /* Ok, ready to run, register it to the system. * The following needs change, if we want to port hostmode * to non-MIPS platform. */ - set_io_port_base((unsigned long)ioremap_nocache(SSB_PCI_MEM, 0x04000000)); + ssb_pcicore_controller.io_map_base = (unsigned long)ioremap_nocache(SSB_PCI_MEM, 0x04000000); + set_io_port_base(ssb_pcicore_controller.io_map_base); /* Give some time to the PCI controller to configure itself with the new * values. Not waiting at this point causes crashes of the machine. */ mdelay(10); |