diff options
Diffstat (limited to 'drivers/staging/rt2860/common')
-rw-r--r-- | drivers/staging/rt2860/common/cmm_data.c | 23 | ||||
-rw-r--r-- | drivers/staging/rt2860/common/cmm_info.c | 6 | ||||
-rw-r--r-- | drivers/staging/rt2860/common/mlme.c | 51 | ||||
-rw-r--r-- | drivers/staging/rt2860/common/rtmp_init.c | 29 |
4 files changed, 4 insertions, 105 deletions
diff --git a/drivers/staging/rt2860/common/cmm_data.c b/drivers/staging/rt2860/common/cmm_data.c index 14a99b3e321..b3f88f52af7 100644 --- a/drivers/staging/rt2860/common/cmm_data.c +++ b/drivers/staging/rt2860/common/cmm_data.c @@ -105,9 +105,7 @@ NDIS_STATUS MiniportMMRequest( PNDIS_PACKET pPacket; NDIS_STATUS Status = NDIS_STATUS_SUCCESS; ULONG FreeNum; -#ifdef RT2860 unsigned long IrqFlags = 0; -#endif // RT2860 // UCHAR IrqState; UCHAR rtmpHwHdr[TXINFO_SIZE + TXWI_SIZE]; //RTMP_HW_HDR_LEN]; @@ -118,10 +116,9 @@ NDIS_STATUS MiniportMMRequest( // 2860C use Tx Ring IrqState = pAd->irq_disabled; -#ifdef RT2860 + if ((pAd->MACVersion == 0x28600100) && (!IrqState)) RTMP_IRQ_LOCK(&pAd->irq_lock, IrqFlags); -#endif // RT2860 // do { @@ -175,17 +172,14 @@ NDIS_STATUS MiniportMMRequest( } while (FALSE); -#ifdef RT2860 // 2860C use Tx Ring if ((pAd->MACVersion == 0x28600100) && (!IrqState)) RTMP_IRQ_UNLOCK(&pAd->irq_lock, IrqFlags); -#endif // RT2860 // return Status; } -#ifdef RT2860 NDIS_STATUS MiniportMMRequestUnlock( IN PRTMP_ADAPTER pAd, IN UCHAR QueIdx, @@ -253,7 +247,6 @@ NDIS_STATUS MiniportMMRequestUnlock( return Status; } -#endif // RT2860 // /* @@ -290,17 +283,14 @@ NDIS_STATUS MlmeHardTransmit( return NDIS_STATUS_FAILURE; } -#ifdef RT2860 if ( pAd->MACVersion == 0x28600100 ) return MlmeHardTransmitTxRing(pAd,QueIdx,pPacket); else -#endif // RT2860 // return MlmeHardTransmitMgmtRing(pAd,QueIdx,pPacket); } -#ifdef RT2860 NDIS_STATUS MlmeHardTransmitTxRing( IN PRTMP_ADAPTER pAd, IN UCHAR QueIdx, @@ -509,7 +499,6 @@ NDIS_STATUS MlmeHardTransmitTxRing( return NDIS_STATUS_SUCCESS; } -#endif // RT2860 // NDIS_STATUS MlmeHardTransmitMgmtRing( @@ -1076,7 +1065,6 @@ VOID RTMPDeQueuePacket( break; } -#ifdef RT2860 FreeNumber[QueIdx] = GET_TXRING_FREENO(pAd, QueIdx); #ifdef DBG_DIAGNOSE @@ -1101,7 +1089,6 @@ VOID RTMPDeQueuePacket( RTMPFreeTXDUponTxDmaDone(pAd, QueIdx); FreeNumber[QueIdx] = GET_TXRING_FREENO(pAd, QueIdx); } -#endif // RT2860 // // probe the Queue Head pQueue = &pAd->TxSwQueue[QueIdx]; @@ -1180,12 +1167,10 @@ VOID RTMPDeQueuePacket( Status = STAHardTransmit(pAd, pTxBlk, QueIdx); #endif // CONFIG_STA_SUPPORT // -#ifdef RT2860 DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags); // static rate also need NICUpdateFifoStaCounters() function. //if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED)) NICUpdateFifoStaCounters(pAd); -#endif // RT2860 // } RT28XX_STOP_DEQUEUE(pAd, QueIdx, IrqFlags); @@ -1764,7 +1749,6 @@ PQUEUE_HEADER RTMPCheckTxSwQueue( } -#ifdef RT2860 BOOLEAN RTMPFreeTXDUponTxDmaDone( IN PRTMP_ADAPTER pAd, IN UCHAR QueIdx) @@ -2309,7 +2293,6 @@ VOID DBGPRINT_RX_RING( DBGPRINT_RAW(RT_DEBUG_TRACE,(" RxSwReadIdx [%d]=", AC0freeIdx)); DBGPRINT_RAW(RT_DEBUG_TRACE,(" pending-NDIS=%ld\n", pAd->RalinkCounters.PendingNdisPacketCount)); } -#endif // RT2860 // /* ======================================================================== @@ -2634,9 +2617,7 @@ MAC_TABLE_ENTRY *MacTableInsertEntry( pEntry->AuthMode = pAd->StaCfg.AuthMode; pEntry->WepStatus = pAd->StaCfg.WepStatus; pEntry->PrivacyFilter = Ndis802_11PrivFilterAcceptAll; -#ifdef RT2860 AsicRemovePairwiseKeyEntry(pAd, pEntry->apidx, (UCHAR)i); -#endif // RT2860 // } #endif // CONFIG_STA_SUPPORT // } @@ -2823,9 +2804,7 @@ VOID MacTableReset( for (i=1; i<MAX_LEN_OF_MAC_TABLE; i++) { -#ifdef RT2860 RT28XX_STA_ENTRY_MAC_RESET(pAd, i); -#endif // RT2860 // if (pAd->MacTab.Content[i].ValidAsCLI == TRUE) { diff --git a/drivers/staging/rt2860/common/cmm_info.c b/drivers/staging/rt2860/common/cmm_info.c index dd92ac6eaed..c3e13195e12 100644 --- a/drivers/staging/rt2860/common/cmm_info.c +++ b/drivers/staging/rt2860/common/cmm_info.c @@ -814,7 +814,6 @@ INT Show_DescInfo_Proc( IN PRTMP_ADAPTER pAd, IN PUCHAR arg) { -#ifdef RT2860 INT i, QueIdx=0; PRT28XX_RXD_STRUC pRxD; PTXD_STRUC pTxD; @@ -845,7 +844,6 @@ INT Show_DescInfo_Proc( hex_dump("Rx Descriptor", (char *)pRxD, 16); printk("pRxD->DDONE = %x\n", pRxD->DDONE); } -#endif // RT2860 // return TRUE; } @@ -1803,9 +1801,7 @@ VOID RTMPAddWcidAttributeEntry( } // For key index and ext IV bit, so only need to update the position(offset+3). -#ifdef RT2860 RTMP_IO_WRITE8(pAd, offset+3, IVEIV); -#endif // RT2860 // DBGPRINT(RT_DEBUG_TRACE,("RTMPAddWcidAttributeEntry: WCID #%d, KeyIndex #%d, Alg=%s\n",Wcid, KeyIdx, CipherName[CipherAlg])); DBGPRINT(RT_DEBUG_TRACE,(" WCIDAttri = 0x%x \n", WCIDAttri)); @@ -2827,9 +2823,7 @@ INT Set_OpMode_Proc( Value = simple_strtol(arg, 0, 10); -#ifdef RT2860 if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE)) -#endif // RT2860 // { DBGPRINT(RT_DEBUG_ERROR, ("Can not switch operate mode on interface up !! \n")); return FALSE; diff --git a/drivers/staging/rt2860/common/mlme.c b/drivers/staging/rt2860/common/mlme.c index 4562cf538dc..c00f9ab9c46 100644 --- a/drivers/staging/rt2860/common/mlme.c +++ b/drivers/staging/rt2860/common/mlme.c @@ -527,7 +527,6 @@ NDIS_STATUS MlmeInit( #ifdef CONFIG_STA_SUPPORT -#ifdef RT2860 IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) @@ -537,7 +536,6 @@ NDIS_STATUS MlmeInit( RTMPInitTimer(pAd, &pAd->Mlme.RadioOnOffTimer, GET_TIMER_FUNCTION(RadioOnExec), pAd, FALSE); } } -#endif // RT2860 // #endif // CONFIG_STA_SUPPORT // } while (FALSE); @@ -711,13 +709,11 @@ VOID MlmeHalt( RTMPCancelTimer(&pAd->MlmeAux.AuthTimer, &Cancelled); RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer, &Cancelled); RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &Cancelled); -#ifdef RT2860 if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) { RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled); RTMPCancelTimer(&pAd->Mlme.RadioOnOffTimer, &Cancelled); } -#endif // RT2860 // #ifdef QOS_DLS_SUPPORT for (i=0; i<MAX_NUM_OF_DLS_ENTRY; i++) @@ -822,7 +818,6 @@ VOID MlmePeriodicExec( } #ifdef CONFIG_STA_SUPPORT -#ifdef RT2860 IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { // If Hardware controlled Radio enabled, we have to check GPIO pin2 every 2 second. @@ -863,7 +858,6 @@ VOID MlmePeriodicExec( } } } -#endif // RT2860 // #endif // CONFIG_STA_SUPPORT // // Do nothing if the driver is starting halt state. @@ -1075,9 +1069,7 @@ VOID MlmePeriodicExec( #ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { -#ifdef RT2860 if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST) && (pAd->bPCIclkOff == FALSE)) -#endif // RT2860 // { // When Adhoc beacon is enabled and RTS/CTS is enabled, there is a chance that hardware MAC FSM will run into a deadlock // and sending CTS-to-self over and over. @@ -5036,16 +5028,13 @@ BOOLEAN MlmeDequeue( VOID MlmeRestartStateMachine( IN PRTMP_ADAPTER pAd) { -#ifdef RT2860 MLME_QUEUE_ELEM *Elem = NULL; -#endif // RT2860 // #ifdef CONFIG_STA_SUPPORT BOOLEAN Cancelled; #endif // CONFIG_STA_SUPPORT // DBGPRINT(RT_DEBUG_TRACE, ("MlmeRestartStateMachine \n")); -#ifdef RT2860 NdisAcquireSpinLock(&pAd->Mlme.TaskLock); if(pAd->Mlme.bRunning) { @@ -5073,7 +5062,6 @@ VOID MlmeRestartStateMachine( DBGPRINT_ERR(("MlmeRestartStateMachine: MlmeQueue empty\n")); } } -#endif // RT2860 // #ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) @@ -5122,12 +5110,10 @@ VOID MlmeRestartStateMachine( } #endif // CONFIG_STA_SUPPORT // -#ifdef RT2860 // Remove running state NdisAcquireSpinLock(&pAd->Mlme.TaskLock); pAd->Mlme.bRunning = FALSE; NdisReleaseSpinLock(&pAd->Mlme.TaskLock); -#endif // RT2860 // } /*! \brief test if the MLME Queue is empty @@ -6799,7 +6785,6 @@ VOID AsicEnableIbssSync( csr9.field.bTsfTicking = 0; RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr9.word); -#ifdef RT2860 // move BEACON TXD and frame content to on-chip memory ptr = (PUCHAR)&pAd->BeaconTxWI; for (i=0; i<TXWI_SIZE; i+=4) // 16-byte TXWI field @@ -6817,7 +6802,6 @@ VOID AsicEnableIbssSync( RTMP_IO_WRITE32(pAd, HW_BEACON_BASE0 + TXWI_SIZE + i, longptr); ptr +=4; } -#endif // RT2860 // // start sending BEACON csr9.field.BeaconInterval = pAd->CommonCfg.BeaconPeriod << 4; // ASIC register in units of 1/16 TU @@ -7186,9 +7170,7 @@ VOID AsicAddSharedKeyEntry( { ULONG offset; //, csr0; SHAREDKEY_MODE_STRUC csr1; -#ifdef RT2860 INT i; -#endif // RT2860 // DBGPRINT(RT_DEBUG_TRACE, ("AsicAddSharedKeyEntry BssIndex=%d, KeyIdx=%d\n", BssIndex,KeyIdx)); //============================================================================================ @@ -7210,7 +7192,6 @@ VOID AsicAddSharedKeyEntry( // // fill key material - key + TX MIC + RX MIC // -#ifdef RT2860 offset = SHARED_KEY_TABLE_BASE + (4*BssIndex + KeyIdx)*HW_KEY_ENTRY_SIZE; for (i=0; i<MAX_LEN_OF_SHARE_KEY; i++) { @@ -7234,7 +7215,6 @@ VOID AsicAddSharedKeyEntry( RTMP_IO_WRITE8(pAd, offset + i, pRxMic[i]); } } -#endif // RT2860 // // @@ -7409,9 +7389,7 @@ VOID AsicAddKeyEntry( PUCHAR pTxtsc = pCipherKey->TxTsc; UCHAR CipherAlg = pCipherKey->CipherAlg; SHAREDKEY_MODE_STRUC csr1; -#ifdef RT2860 UCHAR i; -#endif // RT2860 // DBGPRINT(RT_DEBUG_TRACE, ("==> AsicAddKeyEntry\n")); // @@ -7426,7 +7404,6 @@ VOID AsicAddKeyEntry( // 2.) Set Key to Asic // //for (i = 0; i < KeyLen; i++) -#ifdef RT2860 for (i = 0; i < MAX_LEN_OF_PEER_KEY; i++) { RTMP_IO_WRITE8(pAd, offset + i, pKey[i]); @@ -7452,7 +7429,6 @@ VOID AsicAddKeyEntry( RTMP_IO_WRITE8(pAd, offset + i, pRxMic[i]); } } -#endif // RT2860 // // @@ -7461,7 +7437,6 @@ VOID AsicAddKeyEntry( // if (bTxKey) { -#ifdef RT2860 offset = MAC_IVEIV_TABLE_BASE + (WCID * HW_IVEIV_ENTRY_SIZE); // // Write IV @@ -7484,7 +7459,6 @@ VOID AsicAddKeyEntry( { RTMP_IO_WRITE8(pAd, offset + i, pTxtsc[i + 2]); } -#endif // RT2860 // AsicUpdateWCIDAttribute(pAd, WCID, BssIndex, CipherAlg, bUsePairewiseKeyTable); } @@ -7550,12 +7524,10 @@ VOID AsicAddPairwiseKeyEntry( // EKEY offset = PAIRWISE_KEY_TABLE_BASE + (WCID * HW_KEY_ENTRY_SIZE); -#ifdef RT2860 for (i=0; i<MAX_LEN_OF_PEER_KEY; i++) { RTMP_IO_WRITE8(pAd, offset + i, pKey[i]); } -#endif // RT2860 // for (i=0; i<MAX_LEN_OF_PEER_KEY; i+=4) { UINT32 Value; @@ -7567,22 +7539,18 @@ VOID AsicAddPairwiseKeyEntry( // MIC KEY if (pTxMic) { -#ifdef RT2860 for (i=0; i<8; i++) { RTMP_IO_WRITE8(pAd, offset+i, pTxMic[i]); } -#endif // RT2860 // } offset += 8; if (pRxMic) { -#ifdef RT2860 for (i=0; i<8; i++) { RTMP_IO_WRITE8(pAd, offset+i, pRxMic[i]); } -#endif // RT2860 // } DBGPRINT(RT_DEBUG_TRACE,("AsicAddPairwiseKeyEntry: WCID #%d Alg=%s\n",WCID, CipherName[CipherAlg])); @@ -7631,11 +7599,9 @@ BOOLEAN AsicSendCommandToMcu( HOST_CMD_CSR_STRUC H2MCmd; H2M_MAILBOX_STRUC H2MMailbox; ULONG i = 0; -#ifdef RT2860 #ifdef RALINK_ATE static UINT32 j = 0; #endif // RALINK_ATE // -#endif // RT2860 // do { RTMP_IO_READ32(pAd, H2M_MAILBOX_CSR, &H2MMailbox.word); @@ -7647,7 +7613,6 @@ BOOLEAN AsicSendCommandToMcu( if (i >= 100) { -#ifdef RT2860 #ifdef RALINK_ATE if (pAd->ate.bFWLoading == TRUE) { @@ -7672,7 +7637,6 @@ BOOLEAN AsicSendCommandToMcu( } else #endif // RALINK_ATE // -#endif // RT2860 // { UINT32 Data; @@ -7700,7 +7664,6 @@ BOOLEAN AsicSendCommandToMcu( //return FALSE; } -#ifdef RT2860 #ifdef RALINK_ATE else if (pAd->ate.bFWLoading == TRUE) { @@ -7710,7 +7673,6 @@ BOOLEAN AsicSendCommandToMcu( j = 0; } #endif // RALINK_ATE // -#endif // RT2860 // H2MMailbox.field.Owner = 1; // pass ownership to MCU H2MMailbox.field.CmdToken = Token; @@ -7729,7 +7691,6 @@ BOOLEAN AsicSendCommandToMcu( return TRUE; } -#ifdef RT2860 BOOLEAN AsicCheckCommanOk( IN PRTMP_ADAPTER pAd, IN UCHAR Command) @@ -7794,7 +7755,6 @@ BOOLEAN AsicCheckCommanOk( return FALSE; } -#endif // RT2860 // /* ======================================================================== @@ -8206,10 +8166,8 @@ VOID AsicEvaluateRxAnt( } RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3); #ifdef CONFIG_STA_SUPPORT -#ifdef RT2860 IF_DEV_CONFIG_OPMODE_ON_STA(pAd) pAd->StaCfg.BBPR3 = BBPR3; -#endif // RT2860 // #endif // CONFIG_STA_SUPPORT // if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED) ) @@ -8321,9 +8279,7 @@ VOID AsicRxAntEvalTimeout( BBPR3 |= (0x0); } RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3); -#ifdef RT2860 - pAd->StaCfg.BBPR3 = BBPR3; -#endif // RT2860 // + pAd->StaCfg.BBPR3 = BBPR3; } #endif // CONFIG_STA_SUPPORT // @@ -8549,10 +8505,7 @@ VOID AsicStaBbpTuning( && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED) ) && !(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)) -#ifdef RT2860 - && (pAd->bPCIclkOff == FALSE) -#endif // RT2860 // - ) + && (pAd->bPCIclkOff == FALSE)) { RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66, &OrigR66Value); R66 = OrigR66Value; diff --git a/drivers/staging/rt2860/common/rtmp_init.c b/drivers/staging/rt2860/common/rtmp_init.c index b9b735dc571..8a00cee3ee9 100644 --- a/drivers/staging/rt2860/common/rtmp_init.c +++ b/drivers/staging/rt2860/common/rtmp_init.c @@ -149,9 +149,7 @@ RTMP_REG_PAIR MACRegTable[] = { {GF20_PROT_CFG, 0x01744004}, // set 19:18 --> Short NAV for MIMO PS {GF40_PROT_CFG, 0x03F44084}, {MM20_PROT_CFG, 0x01744004}, -#ifdef RT2860 {MM40_PROT_CFG, 0x03F54084}, -#endif // RT2860 // {TXOP_CTRL_CFG, 0x0000583f, /*0x0000243f*/ /*0x000024bf*/}, //Extension channel backoff. {TX_RTS_CFG, 0x00092b20}, {EXP_ACK_TIME, 0x002400ca}, // default value @@ -188,9 +186,7 @@ RTMP_REG_PAIR STAMACRegTable[] = { #define FIRMWAREIMAGEV1_LENGTH 0x1000 #define FIRMWAREIMAGEV2_LENGTH 0x1000 -#ifdef RT2860 #define FIRMWARE_MINOR_VERSION 2 -#endif // RT2860 // /* @@ -248,9 +244,7 @@ NDIS_STATUS RTMPAllocAdapterBlock( // Init spin locks NdisAllocateSpinLock(&pAd->MgmtRingLock); -#ifdef RT2860 NdisAllocateSpinLock(&pAd->RxRingLock); -#endif // RT2860 // for (index =0 ; index < NUM_OF_TX_RING; index++) { @@ -1555,10 +1549,7 @@ VOID NICInitAsicFromEEPROM( pAd->LedCntl.word = 0x01; pAd->Led1 = 0x5555; pAd->Led2 = 0x2221; - -#ifdef RT2860 pAd->Led3 = 0xA9F8; -#endif // RT2860 // } AsicSendCommandToMcu(pAd, 0x52, 0xff, (UCHAR)pAd->Led1, (UCHAR)(pAd->Led1 >> 8)); @@ -1594,12 +1585,10 @@ VOID NICInitAsicFromEEPROM( else { RTMPSetLED(pAd, LED_RADIO_ON); -#ifdef RT2860 AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x02); AsicSendCommandToMcu(pAd, 0x31, PowerWakeCID, 0x00, 0x00); // 2-1. wait command ok. AsicCheckCommanOk(pAd, PowerWakeCID); -#endif // RT2860 // } } #endif // CONFIG_STA_SUPPORT // @@ -1677,10 +1666,8 @@ NDIS_STATUS NICInitializeAdapter( { NDIS_STATUS Status = NDIS_STATUS_SUCCESS; WPDMA_GLO_CFG_STRUC GloCfg; -#ifdef RT2860 UINT32 Value; DELAY_INT_CFG_STRUC IntCfg; -#endif // RT2860 // ULONG i =0, j=0; AC_TXOP_CSR0_STRUC csr0; @@ -1719,11 +1706,9 @@ retry: // asic simulation sequence put this ahead before loading firmware. // pbf hardware reset -#ifdef RT2860 RTMP_IO_WRITE32(pAd, WPDMA_RST_IDX, 0x1003f); // 0x10000 for reset rx, 0x3f resets all 6 tx rings. RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0xe1f); RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0xe00); -#endif // RT2860 // // Initialze ASIC for TX & Rx operation if (NICInitializeAsic(pAd , bHardReset) != NDIS_STATUS_SUCCESS) @@ -1737,7 +1722,6 @@ retry: } -#ifdef RT2860 // Write AC_BK base address register Value = RTMP_GetPhysicalAddressLow(pAd->TxRing[QID_AC_BK].Cell[0].AllocPa); RTMP_IO_WRITE32(pAd, TX_BASE_PTR1, Value); @@ -1810,7 +1794,6 @@ retry: // Write RX_RING_CSR register Value = RX_RING_SIZE; RTMP_IO_WRITE32(pAd, RX_MAX_CNT, Value); -#endif // RT2860 // // WMM parameter @@ -1829,7 +1812,6 @@ retry: RTMP_IO_WRITE32(pAd, WMM_TXOP1_CFG, csr0.word); -#ifdef RT2860 // 3. Set DMA global configuration except TX_DMA_EN and RX_DMA_EN bits: i = 0; do @@ -1848,7 +1830,6 @@ retry: IntCfg.word = 0; RTMP_IO_WRITE32(pAd, DELAY_INT_CFG, IntCfg.word); -#endif // RT2860 // // reset action @@ -1889,7 +1870,6 @@ NDIS_STATUS NICInitializeAsic( DBGPRINT(RT_DEBUG_TRACE, ("--> NICInitializeAsic\n")); -#ifdef RT2860 if (bHardReset == TRUE) { RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x3); @@ -1914,7 +1894,6 @@ NDIS_STATUS NICInitializeAsic( } } #endif // CONFIG_STA_SUPPORT // -#endif // RT2860 // // @@ -3153,12 +3132,10 @@ VOID UserCfgInit( pAd->CommonCfg.BBPCurrentBW = BW_20; pAd->LedCntl.word = 0; -#ifdef RT2860 pAd->LedIndicatorStregth = 0; pAd->RLnkCtrlOffset = 0; pAd->HostLnkCtrlOffset = 0; pAd->CheckDmaBusyCount = 0; -#endif // RT2860 // pAd->bAutoTxAgcA = FALSE; // Default is OFF pAd->bAutoTxAgcG = FALSE; // Default is OFF @@ -3418,9 +3395,7 @@ VOID UserCfgInit( pAd->ate.bRxFer = 0; pAd->ate.bQATxStart = FALSE; pAd->ate.bQARxStart = FALSE; -#ifdef RT2860 pAd->ate.bFWLoading = FALSE; -#endif // RT2860 // #ifdef RALINK_28xx_QA //pAd->ate.Repeat = 0; pAd->ate.TxStatus = 0; @@ -3430,9 +3405,7 @@ VOID UserCfgInit( pAd->CommonCfg.bWiFiTest = FALSE; -#ifdef RT2860 - pAd->bPCIclkOff = FALSE; -#endif // RT2860 // + pAd->bPCIclkOff = FALSE; RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP); DBGPRINT(RT_DEBUG_TRACE, ("<-- UserCfgInit\n")); |