diff options
Diffstat (limited to 'drivers/staging/rt2870/common/cmm_info.c')
| -rw-r--r-- | drivers/staging/rt2870/common/cmm_info.c | 79 |
1 files changed, 3 insertions, 76 deletions
diff --git a/drivers/staging/rt2870/common/cmm_info.c b/drivers/staging/rt2870/common/cmm_info.c index 33eca605ba7..99a5ca62f25 100644 --- a/drivers/staging/rt2870/common/cmm_info.c +++ b/drivers/staging/rt2870/common/cmm_info.c @@ -133,11 +133,9 @@ INT Show_IEEE80211H_Proc( IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf); -#ifdef CONFIG_STA_SUPPORT INT Show_NetworkType_Proc( IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf); -#endif // CONFIG_STA_SUPPORT // INT Show_AuthMode_Proc( IN PRTMP_ADAPTER pAd, @@ -207,9 +205,7 @@ static struct { {"WmmCapable", Show_WmmCapable_Proc}, #endif {"IEEE80211H", Show_IEEE80211H_Proc}, -#ifdef CONFIG_STA_SUPPORT {"NetworkType", Show_NetworkType_Proc}, -#endif // CONFIG_STA_SUPPORT // {"AuthMode", Show_AuthMode_Proc}, {"EncrypType", Show_EncrypType_Proc}, {"DefaultKeyID", Show_DefaultKeyID_Proc}, @@ -233,11 +229,8 @@ INT Set_DriverVersion_Proc( IN PRTMP_ADAPTER pAd, IN PUCHAR arg) { - -#ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) DBGPRINT(RT_DEBUG_TRACE, ("Driver version-%s\n", STA_DRIVER_VERSION)); -#endif // CONFIG_STA_SUPPORT // return TRUE; } @@ -347,8 +340,6 @@ INT Set_WirelessMode_Proc( WirelessMode = simple_strtol(arg, 0, 10); - -#ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { INT MaxPhyMode = PHY_11G; @@ -385,7 +376,6 @@ INT Set_WirelessMode_Proc( success = FALSE; } } -#endif // CONFIG_STA_SUPPORT // // it is needed to set SSID to take effect if (success == TRUE) @@ -423,7 +413,6 @@ INT Set_Channel_Proc( // check if this channel is valid if (ChannelSanity(pAd, Channel) == TRUE) { -#ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { pAd->CommonCfg.Channel = Channel; @@ -450,16 +439,12 @@ INT Set_Channel_Proc( } } } -#endif // CONFIG_STA_SUPPORT // success = TRUE; } else { - -#ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) success = FALSE; -#endif // CONFIG_STA_SUPPORT // } @@ -515,14 +500,11 @@ INT Set_TxPower_Proc( TxPower = (ULONG) simple_strtol(arg, 0, 10); if (TxPower <= 100) { - -#ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { pAd->CommonCfg.TxPowerDefault = TxPower; pAd->CommonCfg.TxPowerPercentage = pAd->CommonCfg.TxPowerDefault; } -#endif // CONFIG_STA_SUPPORT // success = TRUE; } else @@ -587,22 +569,18 @@ INT Set_TxPreamble_Proc( { case Rt802_11PreambleShort: pAd->CommonCfg.TxPreamble = Preamble; -#ifdef CONFIG_STA_SUPPORT + IF_DEV_CONFIG_OPMODE_ON_STA(pAd) MlmeSetTxPreamble(pAd, Rt802_11PreambleShort); -#endif // CONFIG_STA_SUPPORT // break; case Rt802_11PreambleLong: -#ifdef CONFIG_STA_SUPPORT case Rt802_11PreambleAuto: // if user wants AUTO, initialize to LONG here, then change according to AP's // capability upon association. -#endif // CONFIG_STA_SUPPORT // pAd->CommonCfg.TxPreamble = Preamble; -#ifdef CONFIG_STA_SUPPORT + IF_DEV_CONFIG_OPMODE_ON_STA(pAd) MlmeSetTxPreamble(pAd, Rt802_11PreambleLong); -#endif // CONFIG_STA_SUPPORT // break; default: //Invalid argument return FALSE; @@ -631,10 +609,8 @@ INT Set_RTSThreshold_Proc( if((RtsThresh > 0) && (RtsThresh <= MAX_RTS_THRESHOLD)) pAd->CommonCfg.RtsThreshold = (USHORT)RtsThresh; -#ifdef CONFIG_STA_SUPPORT else if (RtsThresh == 0) pAd->CommonCfg.RtsThreshold = MAX_RTS_THRESHOLD; -#endif // CONFIG_STA_SUPPORT // else return FALSE; //Invalid argument @@ -675,7 +651,6 @@ INT Set_FragThreshold_Proc( pAd->CommonCfg.FragmentThreshold = (USHORT)FragThresh; } -#ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { if (pAd->CommonCfg.FragmentThreshold == MAX_FRAG_THRESHOLD) @@ -683,7 +658,6 @@ INT Set_FragThreshold_Proc( else pAd->CommonCfg.bUseZeroToDisableFragment = FALSE; } -#endif // CONFIG_STA_SUPPORT // DBGPRINT(RT_DEBUG_TRACE, ("Set_FragThreshold_Proc::(FragThreshold=%d)\n", pAd->CommonCfg.FragmentThreshold)); @@ -1184,7 +1158,6 @@ BOOLEAN RTMPCheckStrPrintAble( ======================================================================== */ -#ifdef CONFIG_STA_SUPPORT VOID RTMPSetDesiredRates( IN PRTMP_ADAPTER pAdapter, IN LONG Rates) @@ -1397,10 +1370,7 @@ NDIS_STATUS RTMPWPARemoveKeyProc( return (Status); } -#endif // CONFIG_STA_SUPPORT // - -#ifdef CONFIG_STA_SUPPORT /* ======================================================================== @@ -1450,7 +1420,6 @@ VOID RTMPWPARemoveAllKeys( } } -#endif // CONFIG_STA_SUPPORT // /* ======================================================================== @@ -1494,10 +1463,8 @@ VOID RTMPSetPhyMode( if (i == pAd->ChannelListNum) { -#ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) pAd->CommonCfg.Channel = FirstChannel(pAd); -#endif // CONFIG_STA_SUPPORT // DBGPRINT(RT_DEBUG_ERROR, ("RTMPSetPhyMode: channel is out of range, use first channel=%d \n", pAd->CommonCfg.Channel)); } @@ -1816,14 +1783,10 @@ VOID RTMPSetHT( } AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm); - -#ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { RTMPSetIndividualHT(pAd, 0); } -#endif // CONFIG_STA_SUPPORT // - } /* @@ -1848,8 +1811,6 @@ VOID RTMPSetIndividualHT( do { - -#ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { pDesired_ht_phy = &pAd->StaCfg.DesiredHtPhyInfo; @@ -1857,7 +1818,6 @@ VOID RTMPSetIndividualHT( //pAd->StaCfg.bAutoTxRateSwitch = (DesiredMcs == MCS_AUTO) ? TRUE : FALSE; break; } -#endif // CONFIG_STA_SUPPORT // } while (FALSE); if (pDesired_ht_phy == NULL) @@ -2009,7 +1969,6 @@ VOID RTMPAddWcidAttributeEntry( USHORT Wcid = 0; { -#ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { if (BssIdx > BSS0) @@ -2030,13 +1989,11 @@ VOID RTMPAddWcidAttributeEntry( else Wcid = MCAST_WCID; } -#endif // CONFIG_STA_SUPPORT // } // Update WCID attribute table offset = MAC_WCID_ATTRIBUTE_BASE + (Wcid * HW_WCID_ATTRI_SIZE); -#ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { if (pEntry && pEntry->ValidAsMesh) @@ -2044,7 +2001,6 @@ VOID RTMPAddWcidAttributeEntry( else WCIDAttri = (CipherAlg<<1) | SHAREDKEYTABLE; } -#endif // CONFIG_STA_SUPPORT // RTMP_IO_WRITE32(pAd, offset, WCIDAttri); @@ -2178,11 +2134,10 @@ VOID RTMPIoctlGetSiteSurvey( WaitCnt = 0; -#ifdef CONFIG_STA_SUPPORT pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE; + while ((ScanRunning(pAdapter) == TRUE) && (WaitCnt++ < 200)) OS_WAIT(500); -#endif // CONFIG_STA_SUPPORT // for(i=0; i<pAdapter->ScanTab.BssNr ;i++) { @@ -2248,9 +2203,7 @@ VOID RTMPIoctlGetSiteSurvey( sprintf(msg+strlen(msg),"\n"); } -#ifdef CONFIG_STA_SUPPORT pAdapter->StaCfg.bScanReqIsFromWebUI = FALSE; -#endif // CONFIG_STA_SUPPORT // wrq->u.data.length = strlen(msg); Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length); @@ -2554,9 +2507,7 @@ INT Set_HtMcs_Proc( IN PUCHAR arg) { ULONG HtMcs, Mcs_tmp; -#ifdef CONFIG_STA_SUPPORT BOOLEAN bAutoRate = FALSE; -#endif // CONFIG_STA_SUPPORT // Mcs_tmp = simple_strtol(arg, 0, 10); @@ -2565,7 +2516,6 @@ INT Set_HtMcs_Proc( else HtMcs = MCS_AUTO; -#ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) { pAd->StaCfg.DesiredTransmitSetting.field.MCS = HtMcs; @@ -2601,7 +2551,6 @@ INT Set_HtMcs_Proc( if (ADHOC_ON(pAd)) return TRUE; } -#endif // CONFIG_STA_SUPPORT // SetCommonHT(pAd); @@ -3075,10 +3024,8 @@ INT Set_FixedTxMode_Proc( fix_tx_mode = FIXED_TXMODE_CCK; } -#ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode = fix_tx_mode; -#endif // CONFIG_STA_SUPPORT // DBGPRINT(RT_DEBUG_TRACE, ("Set_FixedTxMode_Proc::(FixedTxMode=%d)\n", fix_tx_mode)); @@ -3165,11 +3112,8 @@ INT Show_SSID_Proc( IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf) { - -#ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) sprintf(pBuf, "\t%s", pAd->CommonCfg.Ssid); -#endif // CONFIG_STA_SUPPORT // return 0; } @@ -3330,11 +3274,8 @@ INT Show_HtMcs_Proc( IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf) { - -#ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) sprintf(pBuf, "\t%u", pAd->StaCfg.DesiredTransmitSetting.field.MCS); -#endif // CONFIG_STA_SUPPORT // return 0; } @@ -3476,11 +3417,8 @@ INT Show_WmmCapable_Proc( IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf) { - -#ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) sprintf(pBuf, "\t%s", pAd->CommonCfg.bWmmCapable ? "TRUE":"FALSE"); -#endif // CONFIG_STA_SUPPORT // return 0; } @@ -3494,7 +3432,6 @@ INT Show_IEEE80211H_Proc( return 0; } -#ifdef CONFIG_STA_SUPPORT INT Show_NetworkType_Proc( IN PRTMP_ADAPTER pAd, OUT PUCHAR pBuf) @@ -3519,7 +3456,6 @@ INT Show_NetworkType_Proc( } return 0; } -#endif // CONFIG_STA_SUPPORT // INT Show_AuthMode_Proc( IN PRTMP_ADAPTER pAd, @@ -3527,10 +3463,8 @@ INT Show_AuthMode_Proc( { NDIS_802_11_AUTHENTICATION_MODE AuthMode = Ndis802_11AuthModeOpen; -#ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) AuthMode = pAd->StaCfg.AuthMode; -#endif // CONFIG_STA_SUPPORT // if ((AuthMode >= Ndis802_11AuthModeOpen) && (AuthMode <= Ndis802_11AuthModeWPA1PSKWPA2PSK)) @@ -3547,10 +3481,8 @@ INT Show_EncrypType_Proc( { NDIS_802_11_WEP_STATUS WepStatus = Ndis802_11WEPDisabled; -#ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) WepStatus = pAd->StaCfg.WepStatus; -#endif // CONFIG_STA_SUPPORT // if ((WepStatus >= Ndis802_11WEPEnabled) && (WepStatus <= Ndis802_11Encryption4KeyAbsent)) @@ -3567,10 +3499,8 @@ INT Show_DefaultKeyID_Proc( { UCHAR DefaultKeyId = 0; -#ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) DefaultKeyId = pAd->StaCfg.DefaultKeyId; -#endif // CONFIG_STA_SUPPORT // sprintf(pBuf, "\t%d", DefaultKeyId); @@ -3640,11 +3570,8 @@ INT Show_WPAPSK_Proc( INT idx; UCHAR PMK[32] = {0}; - -#ifdef CONFIG_STA_SUPPORT IF_DEV_CONFIG_OPMODE_ON_STA(pAd) NdisMoveMemory(PMK, pAd->StaCfg.PMK, 32); -#endif // CONFIG_STA_SUPPORT // sprintf(pBuf, "\tPMK = "); for (idx = 0; idx < 32; idx++) |