aboutsummaryrefslogtreecommitdiff
path: root/drivers/staging/rt2870/common/mlme.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/staging/rt2870/common/mlme.c')
-rw-r--r--drivers/staging/rt2870/common/mlme.c92
1 files changed, 7 insertions, 85 deletions
diff --git a/drivers/staging/rt2870/common/mlme.c b/drivers/staging/rt2870/common/mlme.c
index b8e9db559b7..a3d5924eabe 100644
--- a/drivers/staging/rt2870/common/mlme.c
+++ b/drivers/staging/rt2870/common/mlme.c
@@ -50,9 +50,7 @@ UCHAR Ccx2QosInfo[] = {0x00, 0x40, 0x96, 0x04};
UCHAR RALINK_OUI[] = {0x00, 0x0c, 0x43};
UCHAR BROADCOM_OUI[] = {0x00, 0x90, 0x4c};
UCHAR WPS_OUI[] = {0x00, 0x50, 0xf2, 0x04};
-#ifdef DOT11_N_SUPPORT
UCHAR PRE_N_HT_OUI[] = {0x00, 0x90, 0x4c};
-#endif // DOT11_N_SUPPORT //
UCHAR RateSwitchTable[] = {
// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
@@ -128,7 +126,6 @@ UCHAR RateSwitchTable11G[] = {
0x07, 0x10, 7, 10, 13,
};
-#ifdef DOT11_N_SUPPORT
UCHAR RateSwitchTable11N1S[] = {
// Item No. Mode Curr-MCS TrainUp TrainDown // Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
0x09, 0x00, 0, 0, 0, // Initial used item after association
@@ -293,7 +290,6 @@ UCHAR RateSwitchTable11BGN3SForABand[] = { // 3*3
0x0a, 0x20, 23, 8, 25,
0x0b, 0x22, 23, 8, 25,
};
-#endif // DOT11_N_SUPPORT //
PUCHAR ReasonString[] = {
/* 0 */ "Reserved",
@@ -340,11 +336,9 @@ USHORT RateIdTo500Kbps[] = { 2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108, 144,
UCHAR SsidIe = IE_SSID;
UCHAR SupRateIe = IE_SUPP_RATES;
UCHAR ExtRateIe = IE_EXT_SUPP_RATES;
-#ifdef DOT11_N_SUPPORT
UCHAR HtCapIe = IE_HT_CAP;
UCHAR AddHtInfoIe = IE_ADD_HT;
UCHAR NewExtChanIe = IE_SECONDARY_CH_OFFSET;
-#endif // DOT11_N_SUPPORT //
UCHAR ErpIe = IE_ERP;
UCHAR DsIe = IE_DS_PARM;
UCHAR TimIe = IE_TIM;
@@ -861,10 +855,8 @@ VOID MlmePeriodicExec(
RT2870_WatchDog(pAd);
#endif // RT2870 //
-#ifdef DOT11_N_SUPPORT
// Need statistics after read counter. So put after NICUpdateRawCounters
ORIBATimerTimeout(pAd);
-#endif // DOT11_N_SUPPORT //
// if MGMT RING is full more than twice within 1 second, we consider there's
// a hardware problem stucking the TX path. In this case, try a hardware reset
@@ -1135,7 +1127,6 @@ VOID STAMlmePeriodicExec(
SKIP_AUTO_SCAN_CONN:
-#ifdef DOT11_N_SUPPORT
if ((pAd->MacTab.Content[BSSID_WCID].TXBAbitmap !=0) && (pAd->MacTab.fAnyBASession == FALSE))
{
pAd->MacTab.fAnyBASession = TRUE;
@@ -1146,7 +1137,6 @@ SKIP_AUTO_SCAN_CONN:
pAd->MacTab.fAnyBASession = FALSE;
AsicUpdateProtect(pAd, pAd->MlmeAux.AddHtInfo.AddHtInfo2.OperaionMode, ALLN_SETPROTECT, FALSE, FALSE);
}
-#endif // DOT11_N_SUPPORT //
return;
}
@@ -1256,7 +1246,6 @@ VOID MlmeSelectTxRateTable(
if ((pAd->OpMode == OPMODE_STA) && ADHOC_ON(pAd))
{
-#ifdef DOT11_N_SUPPORT
if ((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) &&
(pEntry->HTCapability.MCSSet[0] == 0xff) &&
((pEntry->HTCapability.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1)))
@@ -1286,11 +1275,8 @@ VOID MlmeSelectTxRateTable(
}
else
-#endif // DOT11_N_SUPPORT //
if ((pEntry->RateLen == 4)
-#ifdef DOT11_N_SUPPORT
&& (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)
-#endif // DOT11_N_SUPPORT //
)
{
*ppTable = RateSwitchTable11B;
@@ -1315,7 +1301,6 @@ VOID MlmeSelectTxRateTable(
break;
}
-#ifdef DOT11_N_SUPPORT
//if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 12) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) &&
// ((pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0x00) || (pAd->Antenna.field.TxPath == 1)))
if ((pEntry->RateLen == 12) && (pEntry->HTCapability.MCSSet[0] == 0xff) &&
@@ -1378,12 +1363,10 @@ VOID MlmeSelectTxRateTable(
break;
}
-#endif // DOT11_N_SUPPORT //
+
//else if ((pAd->StaActive.SupRateLen == 4) && (pAd->StaActive.ExtRateLen == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
if ((pEntry->RateLen == 4)
-#ifdef DOT11_N_SUPPORT
&& (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)
-#endif // DOT11_N_SUPPORT //
)
{// B only AP
*ppTable = RateSwitchTable11B;
@@ -1395,9 +1378,7 @@ VOID MlmeSelectTxRateTable(
//else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen > 8) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
if ((pEntry->RateLen > 8)
-#ifdef DOT11_N_SUPPORT
&& (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)
-#endif // DOT11_N_SUPPORT //
)
{// B/G mixed AP
*ppTable = RateSwitchTable11BG;
@@ -1409,9 +1390,7 @@ VOID MlmeSelectTxRateTable(
//else if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 8) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
if ((pEntry->RateLen == 8)
-#ifdef DOT11_N_SUPPORT
&& (pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0)
-#endif // DOT11_N_SUPPORT //
)
{// G only AP
*ppTable = RateSwitchTable11G;
@@ -1420,15 +1399,11 @@ VOID MlmeSelectTxRateTable(
break;
}
-#ifdef DOT11_N_SUPPORT
-#endif // DOT11_N_SUPPORT //
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
-#ifdef DOT11_N_SUPPORT
//else if ((pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0) && (pAd->StaActive.SupportedPhyInfo.MCSSet[1] == 0))
if ((pEntry->HTCapability.MCSSet[0] == 0) && (pEntry->HTCapability.MCSSet[1] == 0))
-#endif // DOT11_N_SUPPORT //
{ // Legacy mode
if (pAd->CommonCfg.MaxTxRate <= RATE_11)
{
@@ -1451,7 +1426,7 @@ VOID MlmeSelectTxRateTable(
}
break;
}
-#ifdef DOT11_N_SUPPORT
+
if (pAd->LatchRfRegs.Channel <= 14)
{
if (pAd->CommonCfg.TxStream == 1)
@@ -1486,7 +1461,7 @@ VOID MlmeSelectTxRateTable(
DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode,default use 11N 2S AP \n"));
}
}
-#endif // DOT11_N_SUPPORT //
+
DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode (SupRateLen=%d, ExtRateLen=%d, MCSSet[0]=0x%x, MCSSet[1]=0x%x)\n",
pAd->StaActive.SupRateLen, pAd->StaActive.ExtRateLen, pAd->StaActive.SupportedPhyInfo.MCSSet[0], pAd->StaActive.SupportedPhyInfo.MCSSet[1]));
}
@@ -1710,13 +1685,11 @@ VOID MlmeSetTxRate(
{
UCHAR MaxMode = MODE_OFDM;
-#ifdef DOT11_N_SUPPORT
MaxMode = MODE_HTGREENFIELD;
if (pTxRate->STBC && (pAd->StaCfg.MaxHTPhyMode.field.STBC) && (pAd->Antenna.field.TxPath == 2))
pAd->StaCfg.HTPhyMode.field.STBC = STBC_USE;
else
-#endif // DOT11_N_SUPPORT //
pAd->StaCfg.HTPhyMode.field.STBC = STBC_NONE;
if (pTxRate->CurrMCS < MCS_AUTO)
@@ -1746,14 +1719,11 @@ VOID MlmeSetTxRate(
if (pTxRate->Mode <= MaxMode)
pAd->StaCfg.HTPhyMode.field.MODE = pTxRate->Mode;
-#ifdef DOT11_N_SUPPORT
if (pTxRate->ShortGI && (pAd->StaCfg.MaxHTPhyMode.field.ShortGI))
pAd->StaCfg.HTPhyMode.field.ShortGI = GI_400;
else
-#endif // DOT11_N_SUPPORT //
pAd->StaCfg.HTPhyMode.field.ShortGI = GI_800;
-#ifdef DOT11_N_SUPPORT
// Reexam each bandwidth's SGI support.
if (pAd->StaCfg.HTPhyMode.field.ShortGI == GI_400)
{
@@ -1797,17 +1767,15 @@ VOID MlmeSetTxRate(
{
AsicUpdateProtect(pAd, HT_RTSCTS_6M, ALLN_SETPROTECT, TRUE, (BOOLEAN)pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent);
}
-#endif // DOT11_N_SUPPORT //
pEntry->HTPhyMode.field.STBC = pAd->StaCfg.HTPhyMode.field.STBC;
pEntry->HTPhyMode.field.ShortGI = pAd->StaCfg.HTPhyMode.field.ShortGI;
pEntry->HTPhyMode.field.MCS = pAd->StaCfg.HTPhyMode.field.MCS;
pEntry->HTPhyMode.field.MODE = pAd->StaCfg.HTPhyMode.field.MODE;
-#ifdef DOT11_N_SUPPORT
+
if ((pAd->StaCfg.MaxHTPhyMode.field.MODE == MODE_HTGREENFIELD) &&
pAd->WIFItestbed.bGreenField)
pEntry->HTPhyMode.field.MODE = MODE_HTGREENFIELD;
-#endif // DOT11_N_SUPPORT //
}
pAd->LastTxRate = (USHORT)(pEntry->HTPhyMode.word);
@@ -1959,14 +1927,12 @@ VOID MlmeDynamicTxRateSwitching(
pCurrTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(CurrRateIdx+1)*5];
-#ifdef DOT11_N_SUPPORT
if ((Rssi > -65) && (pCurrTxRate->Mode >= MODE_HTMIX))
{
TrainUp = (pCurrTxRate->TrainUp + (pCurrTxRate->TrainUp >> 1));
TrainDown = (pCurrTxRate->TrainDown + (pCurrTxRate->TrainDown >> 1));
}
else
-#endif // DOT11_N_SUPPORT //
{
TrainUp = pCurrTxRate->TrainUp;
TrainDown = pCurrTxRate->TrainDown;
@@ -2090,7 +2056,7 @@ VOID MlmeDynamicTxRateSwitching(
RssiOffset = 8;
}
}
-#ifdef DOT11_N_SUPPORT
+
/*if (MCS15)*/
if ((pTable == RateSwitchTable11BGN3S) ||
(pTable == RateSwitchTable11N3S) ||
@@ -2157,7 +2123,6 @@ VOID MlmeDynamicTxRateSwitching(
TxRateIdx = MCS0;
}
else
-#endif // DOT11_N_SUPPORT //
{// Legacy mode
if (MCS7 && (Rssi > -70))
TxRateIdx = MCS7;
@@ -2391,14 +2356,12 @@ VOID StaQuickResponeForRateUpExec(
pCurrTxRate = (PRTMP_TX_RATE_SWITCH) &pTable[(CurrRateIdx+1)*5];
-#ifdef DOT11_N_SUPPORT
if ((Rssi > -65) && (pCurrTxRate->Mode >= MODE_HTMIX))
{
TrainUp = (pCurrTxRate->TrainUp + (pCurrTxRate->TrainUp >> 1));
TrainDown = (pCurrTxRate->TrainDown + (pCurrTxRate->TrainDown >> 1));
}
else
-#endif // DOT11_N_SUPPORT //
{
TrainUp = pCurrTxRate->TrainUp;
TrainDown = pCurrTxRate->TrainDown;
@@ -2961,9 +2924,7 @@ VOID MlmeUpdateTxRates(
{
case PHY_11BG_MIXED:
case PHY_11B:
-#ifdef DOT11_N_SUPPORT
case PHY_11BGN_MIXED:
-#endif // DOT11_N_SUPPORT //
pAd->CommonCfg.MlmeRate = RATE_1;
pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_CCK;
pAd->CommonCfg.MlmeTransmit.field.MCS = RATE_1;
@@ -2976,22 +2937,18 @@ VOID MlmeUpdateTxRates(
break;
case PHY_11G:
case PHY_11A:
-#ifdef DOT11_N_SUPPORT
case PHY_11AGN_MIXED:
case PHY_11GN_MIXED:
case PHY_11N_2_4G:
case PHY_11AN_MIXED:
case PHY_11N_5G:
-#endif // DOT11_N_SUPPORT //
pAd->CommonCfg.MlmeRate = RATE_6;
pAd->CommonCfg.RtsRate = RATE_6;
pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM;
pAd->CommonCfg.MlmeTransmit.field.MCS = OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate];
break;
case PHY_11ABG_MIXED:
-#ifdef DOT11_N_SUPPORT
case PHY_11ABGN_MIXED:
-#endif // DOT11_N_SUPPORT //
if (pAd->CommonCfg.Channel <= 14)
{
pAd->CommonCfg.MlmeRate = RATE_1;
@@ -3034,7 +2991,6 @@ VOID MlmeUpdateTxRates(
pAd->CommonCfg.MlmeTransmit.word, pAd->MacTab.Content[BSSID_WCID].MinHTPhyMode.word ,pAd->MacTab.Content[BSSID_WCID].MaxHTPhyMode.word ,pAd->MacTab.Content[BSSID_WCID].HTPhyMode.word ));
}
-#ifdef DOT11_N_SUPPORT
/*
==========================================================================
Description:
@@ -3185,7 +3141,6 @@ VOID MlmeUpdateHtTxRates(
pHtPhy->field.BW, pHtPhy->field.ShortGI, pHtPhy->field.MODE));
DBGPRINT(RT_DEBUG_TRACE,("MlmeUpdateHtTxRates<=== \n"));
}
-#endif // DOT11_N_SUPPORT //
// IRQL = DISPATCH_LEVEL
VOID MlmeRadioOff(
@@ -3230,7 +3185,6 @@ VOID BssTableInit(
}
}
-#ifdef DOT11_N_SUPPORT
VOID BATableInit(
IN PRTMP_ADAPTER pAd,
IN BA_TABLE *Tab)
@@ -3250,7 +3204,6 @@ VOID BATableInit(
Tab->BAOriEntry[i].ORI_BA_Status = Originator_NONE;
}
}
-#endif // DOT11_N_SUPPORT //
/*! \brief search the BSS table by SSID
* \param p_tab pointer to the bss table
@@ -3360,7 +3313,6 @@ VOID BssTableDeleteEntry(
}
}
-#ifdef DOT11_N_SUPPORT
/*
========================================================================
Routine Description:
@@ -3392,7 +3344,6 @@ VOID BATableDeleteORIEntry(
NdisReleaseSpinLock(&pAd->BATabLock);
}
}
-#endif // DOT11_N_SUPPORT //
/*! \brief
* \param
@@ -3509,7 +3460,7 @@ VOID BssEntrySet(
pBss->AddHtInfoLen = 0;
pBss->HtCapabilityLen = 0;
-#ifdef DOT11_N_SUPPORT
+
if (HtCapabilityLen> 0)
{
pBss->HtCapabilityLen = HtCapabilityLen;
@@ -3529,7 +3480,6 @@ VOID BssEntrySet(
}
}
}
-#endif // DOT11_N_SUPPORT //
BssCipherParse(pBss);
@@ -3720,7 +3670,7 @@ VOID BssTableSsidSort(
(SSID_EQUAL(Ssid, SsidLen, pInBss->Ssid, pInBss->SsidLen) || bIsHiddenApIncluded))
{
BSS_ENTRY *pOutBss = &OutTab->BssEntry[OutTab->BssNr];
-#ifdef DOT11_N_SUPPORT
+
// 2.4G/5G N only mode
if ((pInBss->HtCapabilityLen == 0) &&
((pAd->CommonCfg.PhyMode == PHY_11N_2_4G) || (pAd->CommonCfg.PhyMode == PHY_11N_5G)))
@@ -3728,7 +3678,6 @@ VOID BssTableSsidSort(
DBGPRINT(RT_DEBUG_TRACE,("STA is in N-only Mode, this AP don't have Ht capability in Beacon.\n"));
continue;
}
-#endif // DOT11_N_SUPPORT //
// New for WPA2
// Check the Authmode first
@@ -3801,7 +3750,6 @@ VOID BssTableSsidSort(
if (SsidLen == 0)
continue;
-#ifdef DOT11_N_SUPPORT
// If both station and AP use 40MHz, still need to check if the 40MHZ band's legality in my country region
// If this 40MHz wideband is not allowed in my country list, use bandwidth 20MHZ instead,
if ((pInBss->CentralChannel != pInBss->Channel) &&
@@ -3821,7 +3769,6 @@ VOID BssTableSsidSort(
}
}
}
-#endif // DOT11_N_SUPPORT //
// copy matching BSS from InTab to OutTab
NdisMoveMemory(pOutBss, pInBss, sizeof(BSS_ENTRY));
@@ -3832,8 +3779,6 @@ VOID BssTableSsidSort(
{
BSS_ENTRY *pOutBss = &OutTab->BssEntry[OutTab->BssNr];
-
-#ifdef DOT11_N_SUPPORT
// 2.4G/5G N only mode
if ((pInBss->HtCapabilityLen == 0) &&
((pAd->CommonCfg.PhyMode == PHY_11N_2_4G) || (pAd->CommonCfg.PhyMode == PHY_11N_5G)))
@@ -3841,7 +3786,6 @@ VOID BssTableSsidSort(
DBGPRINT(RT_DEBUG_TRACE,("STA is in N-only Mode, this AP don't have Ht capability in Beacon.\n"));
continue;
}
-#endif // DOT11_N_SUPPORT //
// New for WPA2
// Check the Authmode first
@@ -3897,7 +3841,6 @@ VOID BssTableSsidSort(
else if (pAd->StaCfg.WepStatus != pInBss->WepStatus)
continue;
-#ifdef DOT11_N_SUPPORT
// If both station and AP use 40MHz, still need to check if the 40MHZ band's legality in my country region
// If this 40MHz wideband is not allowed in my country list, use bandwidth 20MHZ instead,
if ((pInBss->CentralChannel != pInBss->Channel) &&
@@ -3910,7 +3853,6 @@ VOID BssTableSsidSort(
pAd->CommonCfg.RegTransmitSetting.field.BW = BW_40;
}
}
-#endif // DOT11_N_SUPPORT //
// copy matching BSS from InTab to OutTab
NdisMoveMemory(pOutBss, pInBss, sizeof(BSS_ENTRY));
@@ -5076,7 +5018,6 @@ VOID AsicUpdateAutoFallBackTable(
}
}
break;
-#ifdef DOT11_N_SUPPORT
case 2: //HT-MIX
case 3: //HT-GF
{
@@ -5138,7 +5079,6 @@ VOID AsicUpdateAutoFallBackTable(
}
}
break;
-#endif // DOT11_N_SUPPORT //
}
pNextTxRate = pCurrTxRate;
@@ -5180,7 +5120,6 @@ VOID AsicUpdateProtect(
UCHAR i;
UINT32 MacReg = 0;
-#ifdef DOT11_N_SUPPORT
if (!(pAd->CommonCfg.bHTProtect) && (OperationMode != 8))
{
return;
@@ -5194,7 +5133,6 @@ VOID AsicUpdateProtect(
SetMask = ALLN_SETPROTECT;
OperationMode = 8;
}
-#endif // DOT11_N_SUPPORT //
// Config ASIC RTS threshold register
RTMP_IO_READ32(pAd, TX_RTS_CFG, &MacReg);
@@ -5204,9 +5142,7 @@ VOID AsicUpdateProtect(
#else
// If the user want disable RtsThreshold and enable Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
if ((
-#ifdef DOT11_N_SUPPORT
(pAd->CommonCfg.BACapability.field.AmsduEnable) ||
-#endif // DOT11_N_SUPPORT //
(pAd->CommonCfg.bAggregationCapable == TRUE))
&& pAd->CommonCfg.RtsThreshold == MAX_RTS_THRESHOLD)
{
@@ -5255,7 +5191,6 @@ VOID AsicUpdateProtect(
Protect[1] = ProtCfg.word;
}
-#ifdef DOT11_N_SUPPORT
// Decide HT frame protection.
if ((SetMask & ALLN_SETPROTECT) != 0)
{
@@ -5386,7 +5321,6 @@ VOID AsicUpdateProtect(
break;
}
}
-#endif // DOT11_N_SUPPORT //
offset = CCK_PROT_CFG;
for (i = 0;i < 6;i++)
@@ -6203,9 +6137,7 @@ VOID AsicDisableRDG(
// Data |= 0x60; // for performance issue not set the TXOP to 0
#endif
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_DYNAMIC_BE_TXOP_ACTIVE)
-#ifdef DOT11_N_SUPPORT
&& (pAd->MacTab.fAnyStationMIMOPSDynamic == FALSE)
-#endif // DOT11_N_SUPPORT //
)
{
// For CWC test, change txop from 0x30 to 0x20 in TxBurst mode
@@ -6643,9 +6575,7 @@ VOID AsicSetSlotTime(
{
// force using short SLOT time for FAE to demo performance when TxBurst is ON
if (((pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) && (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED)))
-#ifdef DOT11_N_SUPPORT
|| ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE) && (pAd->CommonCfg.BACapability.field.Policy == BA_NOTUSE))
-#endif // DOT11_N_SUPPORT //
)
{
// In this case, we will think it is doing Wi-Fi test
@@ -7185,7 +7115,6 @@ VOID RTMPCheckRates(
NdisMoveMemory(SupRate, NewRate, NewRateLen);
}
-#ifdef DOT11_N_SUPPORT
BOOLEAN RTMPCheckChannel(
IN PRTMP_ADAPTER pAd,
IN UCHAR CentralChannel,
@@ -7331,7 +7260,6 @@ BOOLEAN RTMPCheckHt(
COPY_AP_HTSETTINGS_FROM_BEACON(pAd, pHtCapability);
return TRUE;
}
-#endif // DOT11_N_SUPPORT //
/*
========================================================================
@@ -7364,10 +7292,8 @@ VOID RTMPUpdateMlmeRate(
MinimumRate = RATE_1;
break;
case PHY_11BG_MIXED:
-#ifdef DOT11_N_SUPPORT
case PHY_11ABGN_MIXED:
case PHY_11BGN_MIXED:
-#endif // DOT11_N_SUPPORT //
if ((pAd->MlmeAux.SupRateLen == 4) &&
(pAd->MlmeAux.ExtRateLen == 0))
// B only AP
@@ -7381,13 +7307,11 @@ VOID RTMPUpdateMlmeRate(
MinimumRate = RATE_6;
break;
case PHY_11A:
-#ifdef DOT11_N_SUPPORT
case PHY_11N_2_4G: // rt2860 need to check mlmerate for 802.11n
case PHY_11GN_MIXED:
case PHY_11AGN_MIXED:
case PHY_11AN_MIXED:
case PHY_11N_5G:
-#endif // DOT11_N_SUPPORT //
ProperMlmeRate = RATE_24;
MinimumRate = RATE_6;
break;
@@ -7982,13 +7906,11 @@ VOID RTMPSetAGCInitValue(
R66 = (UCHAR)(0x32 + (GET_LNA_GAIN(pAd)*5)/3);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
}
-#ifdef DOT11_N_SUPPORT
else
{
R66 = (UCHAR)(0x3A + (GET_LNA_GAIN(pAd)*5)/3);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R66, R66);
}
-#endif // DOT11_N_SUPPORT //
}
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-28 11:19:27 +0000