diff options
Diffstat (limited to 'drivers/staging/rt2870/sta')
-rw-r--r-- | drivers/staging/rt2870/sta/assoc.c | 166 | ||||
-rw-r--r-- | drivers/staging/rt2870/sta/auth.c | 14 | ||||
-rw-r--r-- | drivers/staging/rt2870/sta/auth_rsp.c | 15 | ||||
-rw-r--r-- | drivers/staging/rt2870/sta/connect.c | 64 | ||||
-rw-r--r-- | drivers/staging/rt2870/sta/rtmp_data.c | 27 | ||||
-rw-r--r-- | drivers/staging/rt2870/sta/sync.c | 9 |
6 files changed, 1 insertions, 294 deletions
diff --git a/drivers/staging/rt2870/sta/assoc.c b/drivers/staging/rt2870/sta/assoc.c index 67f510ce0d8..d958b2f3f36 100644 --- a/drivers/staging/rt2870/sta/assoc.c +++ b/drivers/staging/rt2870/sta/assoc.c @@ -560,34 +560,6 @@ VOID MlmeAssocReqAction( END_OF_ARGS); FrameLen += tmp; - // - // Add CipherSuite CCKM or LeapTkip if setting. - // -#ifdef LEAP_SUPPORT - if (LEAP_CCKM_ON(pAd)) - { - MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp, - CipherSuiteCiscoCCKMLen, CipherSuiteCiscoCCKM, - END_OF_ARGS); - FrameLen += tmp; - - // Third add RSN - NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, CipherSuiteCiscoCCKM, CipherSuiteCiscoCCKMLen); //Save CipherSuite - VarIesOffset += CipherSuiteCiscoCCKMLen; - } - else if ((pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP) && (pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled)) - { - MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp, - CipherSuiteCCXTkipLen, CipherSuiteCCXTkip, - END_OF_ARGS); - FrameLen += tmp; - - // Third add RSN - NdisMoveMemory(pAd->StaCfg.ReqVarIEs + VarIesOffset, CipherSuiteCCXTkip, CipherSuiteCCXTkipLen); - VarIesOffset += CipherSuiteCCXTkipLen; - } -#endif // LEAP_SUPPORT // - // Add by James 03/06/27 // Set Variable IEs Length pAd->StaCfg.ReqVarIELen = VarIesOffset; @@ -647,23 +619,6 @@ VOID MlmeReassocReqAction( NDIS_STATUS NStatus; ULONG tmp; PUCHAR pOutBuffer = NULL; -//CCX 2.X -#ifdef LEAP_SUPPORT - UCHAR CkipFlag; - UCHAR CkipNegotiationBuffer[CKIP_NEGOTIATION_LENGTH]; - UCHAR AironetCkipIe = IE_AIRONET_CKIP; - UCHAR AironetCkipLen = CKIP_NEGOTIATION_LENGTH; - UCHAR AironetIPAddressIE = IE_AIRONET_IPADDRESS; - UCHAR AironetIPAddressLen = AIRONET_IPADDRESS_LENGTH; - UCHAR AironetIPAddressBuffer[AIRONET_IPADDRESS_LENGTH] = {0x00, 0x40, 0x96, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00}; - UCHAR AironetCCKMReassocIE = IE_AIRONET_CCKMREASSOC; - UCHAR AironetCCKMReassocLen = AIRONET_CCKMREASSOC_LENGTH; - UCHAR AironetCCKMReassocBuffer[AIRONET_CCKMREASSOC_LENGTH]; - UCHAR AironetOUI[] = {0x00, 0x40, 0x96, 0x00}; - UCHAR MICMN[16]; - UCHAR CalcMicBuffer[80]; - ULONG CalcMicBufferLen = 0; -#endif // LEAP_SUPPORT // USHORT Status; // Block all authentication request durning WPA block period @@ -805,73 +760,6 @@ VOID MlmeReassocReqAction( END_OF_ARGS); FrameLen += TmpLen; } -#ifdef LEAP_SUPPORT - if (LEAP_CCKM_ON(pAd) && (pAd->StaCfg.CCKMLinkUpFlag == TRUE)) - { - CkipFlag = pAd->StaCfg.CkipFlag; // We have update that at PeerBeaconAtJoinRequest() - if (CkipFlag != 0) - { - NdisZeroMemory(CkipNegotiationBuffer, CKIP_NEGOTIATION_LENGTH); - CkipNegotiationBuffer[2] = 0x66; - // Make it try KP & MIC, since we have to follow the result from AssocRsp - CkipNegotiationBuffer[8] = 0x18; - CkipNegotiationBuffer[CKIP_NEGOTIATION_LENGTH - 1] = 0x22; - - MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp, - 1, &AironetCkipIe, - 1, &AironetCkipLen, - AironetCkipLen, CkipNegotiationBuffer, - END_OF_ARGS); - FrameLen += tmp; - } - - MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp, - 1, &AironetIPAddressIE, - 1, &AironetIPAddressLen, - AironetIPAddressLen, AironetIPAddressBuffer, - END_OF_ARGS); - FrameLen += tmp; - - // - // The RN is incremented before each reassociation request. - // - pAd->StaCfg.CCKMRN++; - // - // Calculate MIC = hmac-md5(krk, STA-ID|BSSID|RSNIE|TSF|RN); - // - COPY_MAC_ADDR(CalcMicBuffer, pAd->CurrentAddress); - CalcMicBufferLen = MAC_ADDR_LEN; - COPY_MAC_ADDR(CalcMicBuffer + CalcMicBufferLen, pAd->MlmeAux.Bssid); - CalcMicBufferLen += MAC_ADDR_LEN; - NdisMoveMemory(CalcMicBuffer + CalcMicBufferLen, CipherSuiteCiscoCCKM, CipherSuiteCiscoCCKMLen); - CalcMicBufferLen += CipherSuiteCiscoCCKMLen; - NdisMoveMemory(CalcMicBuffer + CalcMicBufferLen, (PUCHAR) &pAd->StaCfg.CCKMBeaconAtJoinTimeStamp, sizeof(pAd->StaCfg.CCKMBeaconAtJoinTimeStamp)); - CalcMicBufferLen += sizeof(pAd->StaCfg.CCKMBeaconAtJoinTimeStamp); - NdisMoveMemory(CalcMicBuffer + CalcMicBufferLen, (PUCHAR)&pAd->StaCfg.CCKMRN, sizeof(pAd->StaCfg.CCKMRN)); - CalcMicBufferLen += sizeof(pAd->StaCfg.CCKMRN); - hmac_md5(pAd->StaCfg.KRK, LEN_EAP_MICK, CalcMicBuffer, CalcMicBufferLen, MICMN); - - // - // fill up CCKM reassociation request element - // - NdisMoveMemory(AironetCCKMReassocBuffer, AironetOUI, 4); - NdisMoveMemory(AironetCCKMReassocBuffer + 4, (PUCHAR)&pAd->StaCfg.CCKMBeaconAtJoinTimeStamp, 8); - NdisMoveMemory(AironetCCKMReassocBuffer + 12, (PUCHAR) &pAd->StaCfg.CCKMRN, 4); - NdisMoveMemory(AironetCCKMReassocBuffer +16, MICMN, 8); - - MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp, - 1, &AironetCCKMReassocIE, - 1, &AironetCCKMReassocLen, - AironetCCKMReassocLen, AironetCCKMReassocBuffer, - END_OF_ARGS); - FrameLen += tmp; - - MakeOutgoingFrame(pOutBuffer + FrameLen, &tmp, - CipherSuiteCiscoCCKMLen,CipherSuiteCiscoCCKM, - END_OF_ARGS); - FrameLen += tmp; - } -#endif // LEAP_SUPPORT // // Add CCX v2 request if CCX2 admin state is on if (pAd->StaCfg.CCXControl.field.Enable == 1) @@ -1069,14 +957,6 @@ VOID PeerAssocRspAction( } else { - // Faile on Association, we need to check the status code - // Is that a Rogue AP? -#ifdef LEAP_SUPPORT - if ((pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP) && (Status == MLME_ALG_NOT_SUPPORT)) - { //Possibly Rogue AP - RogueApTableSetEntry(pAd, &pAd->StaCfg.RogueApTab, pAd->MlmeAux.Bssid, LEAP_REASON_INVALID_AUTH); - } -#endif // LEAP_SUPPORT // } pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE; MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_ASSOC_CONF, 2, &Status); @@ -1160,37 +1040,6 @@ VOID PeerReassocRspAction( } - // - // Cisco Leap CCKM supported Re-association. - // -#ifdef LEAP_SUPPORT - if (LEAP_CCKM_ON(pAd) && (pAd->StaCfg.CCKMLinkUpFlag == TRUE)) - { - if (CCKMAssocRspSanity(pAd, Elem->Msg, Elem->MsgLen) == TRUE) - { - pAd->StaCfg.CkipFlag = CkipFlag; - if (CkipFlag & 0x18) - { - NdisZeroMemory(pAd->StaCfg.TxSEQ, 4); - NdisZeroMemory(pAd->StaCfg.RxSEQ, 4); - NdisZeroMemory(pAd->StaCfg.CKIPMIC, 4); - pAd->StaCfg.GIV[0] = RandomByte(pAd); - pAd->StaCfg.GIV[1] = RandomByte(pAd); - pAd->StaCfg.GIV[2] = RandomByte(pAd); - pAd->StaCfg.bCkipOn = TRUE; - DBGPRINT(RT_DEBUG_TRACE, ("<CCX> pAd->StaCfg.CkipFlag = 0x%02x\n", pAd->StaCfg.CkipFlag)); - } - - pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE; - MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_REASSOC_CONF, 2, &Status); - } - else - { - DBGPRINT(RT_DEBUG_TRACE, ("ASSOC - CCKMAssocRspSanity() sanity check fail\n")); - } - } - else -#endif // LEAP_SUPPORT // { // CkipFlag is no use for reassociate pAd->Mlme.AssocMachine.CurrState = ASSOC_IDLE; @@ -1374,21 +1223,6 @@ VOID PeerDisassocAction( RTMPSendWirelessEvent(pAd, IW_DISASSOC_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0); } - -#ifdef LEAP_SUPPORT - if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP) - { - // Cisco_LEAP has start a timer - // We should cancel it if using LEAP - RTMPCancelTimer(&pAd->StaCfg.LeapAuthTimer, &TimerCancelled); - //Check is it mach the LEAP Authentication failed as possible a Rogue AP - //on it's PortSecured not equal to WPA_802_1X_PORT_SECURED while process the Association. - if ((pAd->Mlme.LeapMachine.CurrState != LEAP_IDLE) && (pAd->StaCfg.PortSecured != WPA_802_1X_PORT_SECURED)) - { - RogueApTableSetEntry(pAd, &pAd->StaCfg.RogueApTab, Addr2, LEAP_REASON_AUTH_TIMEOUT); - } - } -#endif // LEAP_SUPPORT // // // Get Current System time and Turn on AdjacentAPReport // diff --git a/drivers/staging/rt2870/sta/auth.c b/drivers/staging/rt2870/sta/auth.c index 73fb8d6ea76..d8414eac42f 100644 --- a/drivers/staging/rt2870/sta/auth.c +++ b/drivers/staging/rt2870/sta/auth.c @@ -218,15 +218,9 @@ VOID PeerAuthRspAtSeq2Action( { // Authentication Mode "LEAP" has allow for CCX 1.X if ((pAd->MlmeAux.Alg == Ndis802_11AuthModeOpen) -#ifdef LEAP_SUPPORT - || (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP) -#endif // LEAP_SUPPORT // ) { pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE; -#ifdef LEAP_SUPPORT - pAd->Mlme.LeapMachine.CurrState = LEAP_IDLE; -#endif // LEAP_SUPPORT // MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_AUTH_CONF, 2, &Status); } else @@ -282,14 +276,6 @@ VOID PeerAuthRspAtSeq2Action( } else { -#ifdef LEAP_SUPPORT - if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP) - { - //Invalid Authentication possible rogue AP - //Add this Ap to Rogue AP. - RogueApTableSetEntry(pAd, &pAd->StaCfg.RogueApTab, Addr2, LEAP_REASON_INVALID_AUTH); - } -#endif // LEAP_SUPPORT // pAd->StaCfg.AuthFailReason = Status; COPY_MAC_ADDR(pAd->StaCfg.AuthFailSta, Addr2); pAd->Mlme.AuthMachine.CurrState = AUTH_REQ_IDLE; diff --git a/drivers/staging/rt2870/sta/auth_rsp.c b/drivers/staging/rt2870/sta/auth_rsp.c index 6e3c2d24cda..d8a806c56e5 100644 --- a/drivers/staging/rt2870/sta/auth_rsp.c +++ b/drivers/staging/rt2870/sta/auth_rsp.c @@ -141,21 +141,6 @@ VOID PeerDeauthAction( RTMPSendWirelessEvent(pAd, IW_DEAUTH_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0); LinkDown(pAd, TRUE); - - // Authentication Mode Cisco_LEAP has start a timer - // We should cancel it if using LEAP -#ifdef LEAP_SUPPORT - if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP) - { - RTMPCancelTimer(&pAd->StaCfg.LeapAuthTimer, &TimerCancelled); - //Check is it mach the LEAP Authentication failed as possible a Rogue AP - //on it's PortSecured not equal to WPA_802_1X_PORT_SECURED while process the Authenticaton. - if ((pAd->StaCfg.PortSecured != WPA_802_1X_PORT_SECURED) && (pAd->Mlme.LeapMachine.CurrState != LEAP_IDLE)) - { - RogueApTableSetEntry(pAd, &pAd->StaCfg.RogueApTab, Addr2, LEAP_REASON_AUTH_TIMEOUT); - } - } -#endif // LEAP_SUPPORT // } } else diff --git a/drivers/staging/rt2870/sta/connect.c b/drivers/staging/rt2870/sta/connect.c index 3da22edc31c..198b0212e6d 100644 --- a/drivers/staging/rt2870/sta/connect.c +++ b/drivers/staging/rt2870/sta/connect.c @@ -383,9 +383,6 @@ VOID CntlOidSsidProc( (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK) -#ifdef LEAP_SUPPORT - || (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP) -#endif // LEAP_SUPPORT // ) && (pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED)) { @@ -770,14 +767,6 @@ VOID CntlWaitJoinProc( // 2. joined a new INFRA network, start from authentication else { -#ifdef LEAP_SUPPORT - // Add AuthMode "LEAP" for CCX 1.X - if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP) - { - AuthParmFill(pAd, &AuthReq, pAd->MlmeAux.Bssid, CISCO_AuthModeLEAP); - } - else -#endif // LEAP_SUPPORT // { // either Ndis802_11AuthModeShared or Ndis802_11AuthModeAutoSwitch, try shared key first if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeShared) || @@ -913,21 +902,6 @@ VOID CntlWaitAuthProc( AssocParmFill(pAd, &AssocReq, pAd->MlmeAux.Bssid, pAd->MlmeAux.CapabilityInfo, ASSOC_TIMEOUT, pAd->StaCfg.DefaultListenCount); -#ifdef LEAP_SUPPORT - // - // Cisco Leap CCKM supported Re-association. - // - if (LEAP_CCKM_ON(pAd) && (pAd->StaCfg.CCKMLinkUpFlag == TRUE)) - { - //if CCKM is turn on , that's mean Fast Reauthentication - //Use CCKM Reassociation instead of normal association for Fast Roaming. - MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_REASSOC_REQ, - sizeof(MLME_ASSOC_REQ_STRUCT), &AssocReq); - - pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_REASSOC; - } - else -#endif // LEAP_SUPPORT // { MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_ASSOC_REQ, sizeof(MLME_ASSOC_REQ_STRUCT), &AssocReq); @@ -941,14 +915,7 @@ VOID CntlWaitAuthProc( // ageing-out. The previous authentication attempt must have let it remove us. // so try Authentication again may help. For D-Link DWL-900AP+ compatibility. DBGPRINT(RT_DEBUG_TRACE, ("CNTL - AUTH FAIL, try again...\n")); -#ifdef LEAP_SUPPORT - //Add AuthMode "LEAP" for CCX 1.X - if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP) - { - AuthParmFill(pAd, &AuthReq, pAd->MlmeAux.Bssid, CISCO_AuthModeLEAP); - } - else -#endif // LEAP_SUPPORT // + { if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeShared) || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeAutoSwitch)) @@ -1000,20 +967,6 @@ VOID CntlWaitAuthProc2( } else { -#ifdef LEAP_SUPPORT - // Process LEAP first, since it use different control variable - // We don't want to affect other poven operation - if (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP) - { - // LEAP Auth not success, try next BSS - DBGPRINT(RT_DEBUG_TRACE, ("CNTL - *LEAP* AUTH FAIL, give up; try next BSS\n")); - DBGPRINT(RT_DEBUG_TRACE, ("Total match BSSID [=%d]\n", pAd->MlmeAux.SsidBssTab.BssNr)); - pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; - pAd->MlmeAux.BssIdx++; - IterateOnBssTab(pAd); - } - else -#endif // LEAP_SUPPORT // if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeAutoSwitch) && (pAd->MlmeAux.Alg == Ndis802_11AuthModeShared)) { @@ -1102,14 +1055,6 @@ VOID CntlWaitReassocProc( if (pAd->CommonCfg.bWirelessEvent) RTMPSendWirelessEvent(pAd, IW_ASSOC_EVENT_FLAG, pAd->MacTab.Content[BSSID_WCID].Addr, BSS0, 0); - -#ifdef LEAP_SUPPORT - if (LEAP_CCKM_ON(pAd)) - { - STA_PORT_SECURED(pAd); - pAd->StaCfg.WpaState = SS_FINISH; - } -#endif // LEAP_SUPPORT // pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Re-assocition successful on BSS #%ld\n", pAd->MlmeAux.RoamIdx)); } @@ -1612,13 +1557,6 @@ VOID LinkUp( DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK UP !! (StaActive.bHtEnable =%d, )\n", pAd->StaActive.SupportedPhyInfo.bHtEnable)); #endif // DOT11_N_SUPPORT // - // - // Report Adjacent AP report. - // -#ifdef LEAP_SUPPORT - CCXAdjacentAPReport(pAd); -#endif // LEAP_SUPPORT // - if (pAd->CommonCfg.bAggregationCapable) { if ((pAd->CommonCfg.bPiggyBackCapable) && (pAd->MlmeAux.APRalinkIe & 0x00000003) == 3) diff --git a/drivers/staging/rt2870/sta/rtmp_data.c b/drivers/staging/rt2870/sta/rtmp_data.c index 309f3276282..835e8825460 100644 --- a/drivers/staging/rt2870/sta/rtmp_data.c +++ b/drivers/staging/rt2870/sta/rtmp_data.c @@ -969,9 +969,6 @@ NDIS_STATUS STASendPacket( #ifdef WPA_SUPPLICANT_SUPPORT || (pAd->StaCfg.IEEE8021X == TRUE) #endif // WPA_SUPPLICANT_SUPPORT // -#ifdef LEAP_SUPPORT - || (pAd->StaCfg.LeapAuthMode == CISCO_AuthModeLEAP) -#endif // LEAP_SUPPORT // ) && ((pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED) || (pAd->StaCfg.MicErrCnt >= 2)) && (RTMP_GET_PACKET_EAPOL(pPacket)== FALSE) @@ -1332,30 +1329,6 @@ VOID STAFindCipherAlgorithm( } else if (Cipher == Ndis802_11Encryption1Enabled) { -#ifdef LEAP_SUPPORT - if (pAd->StaCfg.CkipFlag & 0x10) // Cisco CKIP KP is on - { - if (LEAP_CCKM_ON(pAd)) - { - if (((*pSrcBufVA & 0x01) && (ADHOC_ON(pAd)))) - KeyIdx = 1; - else - KeyIdx = 0; - } - else - KeyIdx = pAd->StaCfg.DefaultKeyId; - } - else if (pAd->StaCfg.CkipFlag & 0x08) // only CKIP CMIC - KeyIdx = pAd->StaCfg.DefaultKeyId; - else if (LEAP_CCKM_ON(pAd)) - { - if ((*pSrcBufVA & 0x01) && (ADHOC_ON(pAd))) - KeyIdx = 1; - else - KeyIdx = 0; - } - else // standard WEP64 or WEP128 -#endif // LEAP_SUPPORT // KeyIdx = pAd->StaCfg.DefaultKeyId; } else if ((Cipher == Ndis802_11Encryption2Enabled) || diff --git a/drivers/staging/rt2870/sta/sync.c b/drivers/staging/rt2870/sta/sync.c index 694018dc572..ea90ecbba50 100644 --- a/drivers/staging/rt2870/sta/sync.c +++ b/drivers/staging/rt2870/sta/sync.c @@ -888,15 +888,6 @@ VOID PeerBeaconAtJoinAction( DBGPRINT(RT_DEBUG_TRACE, ("SYNC - after JOIN, SupRateLen=%d, ExtRateLen=%d\n", pAd->MlmeAux.SupRateLen, pAd->MlmeAux.ExtRateLen)); -#ifdef LEAP_SUPPORT - // Update CkipFlag - pAd->StaCfg.CkipFlag = CkipFlag; - - // Keep TimeStamp for Re-Association used. - if (LEAP_CCKM_ON(pAd) && (pAd->StaCfg.CCKMLinkUpFlag == TRUE)) - pAd->StaCfg.CCKMBeaconAtJoinTimeStamp = TimeStamp; -#endif // LEAP_SUPPORT // - if (AironetCellPowerLimit != 0xFF) { //We need to change our TxPower for CCX 2.0 AP Control of Client Transmit Power |