aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/Kconfig')
-rw-r--r--drivers/usb/Kconfig127
1 files changed, 127 insertions, 0 deletions
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
new file mode 100644
index 00000000000..cd329dd7fb8
--- /dev/null
+++ b/drivers/usb/Kconfig
@@ -0,0 +1,127 @@
+#
+# USB device configuration
+#
+
+menu "USB support"
+
+# Host-side USB depends on having a host controller
+# NOTE: dummy_hcd is always an option, but it's ignored here ...
+# NOTE: SL-811 option should be board-specific ...
+config USB_ARCH_HAS_HCD
+ boolean
+ default y if USB_ARCH_HAS_OHCI
+ default y if ARM # SL-811
+ default PCI
+
+# many non-PCI SOC chips embed OHCI
+config USB_ARCH_HAS_OHCI
+ boolean
+ # ARM:
+ default y if SA1111
+ default y if ARCH_OMAP
+ default y if ARCH_LH7A404
+ default y if PXA27x
+ # PPC:
+ default y if STB03xxx
+ default y if PPC_MPC52xx
+ # MIPS:
+ default y if SOC_AU1X00
+ # more:
+ default PCI
+
+# ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
+config USB
+ tristate "Support for Host-side USB"
+ depends on USB_ARCH_HAS_HCD
+ ---help---
+ Universal Serial Bus (USB) is a specification for a serial bus
+ subsystem which offers higher speeds and more features than the
+ traditional PC serial port. The bus supplies power to peripherals
+ and allows for hot swapping. Up to 127 USB peripherals can be
+ connected to a single USB host in a tree structure.
+
+ The USB host is the root of the tree, the peripherals are the
+ leaves and the inner nodes are special USB devices called hubs.
+ Most PCs now have USB host ports, used to connect peripherals
+ such as scanners, keyboards, mice, modems, cameras, disks,
+ flash memory, network links, and printers to the PC.
+
+ Say Y here if your computer has a host-side USB port and you want
+ to use USB devices. You then need to say Y to at least one of the
+ Host Controller Driver (HCD) options below. Choose a USB 1.1
+ controller, such as "UHCI HCD support" or "OHCI HCD support",
+ and "EHCI HCD (USB 2.0) support" except for older systems that
+ do not have USB 2.0 support. It doesn't normally hurt to select
+ them all if you are not certain.
+
+ If your system has a device-side USB port, used in the peripheral
+ side of the USB protocol, see the "USB Gadget" framework instead.
+
+ After choosing your HCD, then select drivers for the USB peripherals
+ you'll be using. You may want to check out the information provided
+ in <file:Documentation/usb/> and especially the links given in
+ <file:Documentation/usb/usb-help.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called usbcore.
+
+source "drivers/usb/core/Kconfig"
+
+source "drivers/usb/host/Kconfig"
+
+source "drivers/usb/class/Kconfig"
+
+source "drivers/usb/storage/Kconfig"
+
+source "drivers/usb/input/Kconfig"
+
+source "drivers/usb/image/Kconfig"
+
+source "drivers/usb/media/Kconfig"
+
+source "drivers/usb/net/Kconfig"
+
+source "drivers/usb/mon/Kconfig"
+
+comment "USB port drivers"
+ depends on USB
+
+config USB_USS720
+ tristate "USS720 parport driver"
+ depends on USB && PARPORT
+ select PARPORT_NOT_PC
+ ---help---
+ This driver is for USB parallel port adapters that use the Lucent
+ Technologies USS-720 chip. These cables are plugged into your USB
+ port and provide USB compatibility to peripherals designed with
+ parallel port interfaces.
+
+ The chip has two modes: automatic mode and manual mode. In automatic
+ mode, it looks to the computer like a standard USB printer. Only
+ printers may be connected to the USS-720 in this mode. The generic
+ USB printer driver ("USB Printer support", above) may be used in
+ that mode, and you can say N here if you want to use the chip only
+ in this mode.
+
+ Manual mode is not limited to printers, any parallel port
+ device should work. This driver utilizes manual mode.
+ Note however that some operations are three orders of magnitude
+ slower than on a PCI/ISA Parallel Port, so timing critical
+ applications might not work.
+
+ Say Y here if you own an USS-720 USB->Parport cable and intend to
+ connect anything other than a printer to it.
+
+ To compile this driver as a module, choose M here: the
+ module will be called uss720.
+
+source "drivers/usb/serial/Kconfig"
+
+source "drivers/usb/misc/Kconfig"
+
+source "drivers/usb/atm/Kconfig"
+
+source "drivers/usb/gadget/Kconfig"
+
+endmenu
+