aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/core/hub.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/core/hub.c')
-rw-r--r--drivers/usb/core/hub.c38
1 files changed, 24 insertions, 14 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 94d5ee263c2..be86ae3f408 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -392,7 +392,7 @@ static void hub_irq(struct urb *urb)
{
struct usb_hub *hub = urb->context;
int status = urb->status;
- int i;
+ unsigned i;
unsigned long bits;
switch (status) {
@@ -1305,6 +1305,7 @@ void usb_set_device_state(struct usb_device *udev,
recursively_mark_NOTATTACHED(udev);
spin_unlock_irqrestore(&device_state_lock, flags);
}
+EXPORT_SYMBOL_GPL(usb_set_device_state);
/*
* WUSB devices are simple: they have no hubs behind, so the mapping
@@ -2382,8 +2383,8 @@ static int hub_port_debounce(struct usb_hub *hub, int port1)
void usb_ep0_reinit(struct usb_device *udev)
{
- usb_disable_endpoint(udev, 0 + USB_DIR_IN);
- usb_disable_endpoint(udev, 0 + USB_DIR_OUT);
+ usb_disable_endpoint(udev, 0 + USB_DIR_IN, true);
+ usb_disable_endpoint(udev, 0 + USB_DIR_OUT, true);
usb_enable_endpoint(udev, &udev->ep0, true);
}
EXPORT_SYMBOL_GPL(usb_ep0_reinit);
@@ -2471,20 +2472,20 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
*/
switch (udev->speed) {
case USB_SPEED_VARIABLE: /* fixed at 512 */
- udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(512);
+ udev->ep0.desc.wMaxPacketSize = cpu_to_le16(512);
break;
case USB_SPEED_HIGH: /* fixed at 64 */
- udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64);
+ udev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
break;
case USB_SPEED_FULL: /* 8, 16, 32, or 64 */
/* to determine the ep0 maxpacket size, try to read
* the device descriptor to get bMaxPacketSize0 and
* then correct our initial guess.
*/
- udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64);
+ udev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
break;
case USB_SPEED_LOW: /* fixed at 8 */
- udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(8);
+ udev->ep0.desc.wMaxPacketSize = cpu_to_le16(8);
break;
default:
goto fail;
@@ -3392,10 +3393,10 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
udev->descriptor = descriptor; /* for disconnect() calls */
goto re_enumerate;
}
-
+
+ /* Restore the device's previous configuration */
if (!udev->actconfig)
goto done;
-
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
USB_REQ_SET_CONFIGURATION, 0,
udev->actconfig->desc.bConfigurationValue, 0,
@@ -3408,16 +3409,25 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
}
usb_set_device_state(udev, USB_STATE_CONFIGURED);
+ /* Put interfaces back into the same altsettings as before.
+ * Don't bother to send the Set-Interface request for interfaces
+ * that were already in altsetting 0; besides being unnecessary,
+ * many devices can't handle it. Instead just reset the host-side
+ * endpoint state.
+ */
for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
struct usb_interface *intf = udev->actconfig->interface[i];
struct usb_interface_descriptor *desc;
- /* set_interface resets host side toggle even
- * for altsetting zero. the interface may have no driver.
- */
desc = &intf->cur_altsetting->desc;
- ret = usb_set_interface(udev, desc->bInterfaceNumber,
- desc->bAlternateSetting);
+ if (desc->bAlternateSetting == 0) {
+ usb_disable_interface(udev, intf, true);
+ usb_enable_interface(udev, intf, true);
+ ret = 0;
+ } else {
+ ret = usb_set_interface(udev, desc->bInterfaceNumber,
+ desc->bAlternateSetting);
+ }
if (ret < 0) {
dev_err(&udev->dev, "failed to restore interface %d "
"altsetting %d (error=%d)\n",