diff options
Diffstat (limited to 'drivers/usb/gadget')
| -rw-r--r-- | drivers/usb/gadget/at91_udc.c | 21 | ||||
| -rw-r--r-- | drivers/usb/gadget/at91_udc.h | 1 | ||||
| -rw-r--r-- | drivers/usb/gadget/config.c | 2 | ||||
| -rw-r--r-- | drivers/usb/gadget/epautoconf.c | 2 | ||||
| -rw-r--r-- | drivers/usb/gadget/ether.c | 148 | ||||
| -rw-r--r-- | drivers/usb/gadget/file_storage.c | 33 | ||||
| -rw-r--r-- | drivers/usb/gadget/gadget_chips.h | 8 | ||||
| -rw-r--r-- | drivers/usb/gadget/gmidi.c | 2 | ||||
| -rw-r--r-- | drivers/usb/gadget/goku_udc.c | 2 | ||||
| -rw-r--r-- | drivers/usb/gadget/inode.c | 240 | ||||
| -rw-r--r-- | drivers/usb/gadget/lh7a40x_udc.h | 2 | ||||
| -rw-r--r-- | drivers/usb/gadget/net2280.c | 2 | ||||
| -rw-r--r-- | drivers/usb/gadget/omap_udc.c | 2 | ||||
| -rw-r--r-- | drivers/usb/gadget/pxa2xx_udc.c | 2 | ||||
| -rw-r--r-- | drivers/usb/gadget/serial.c | 2 | ||||
| -rw-r--r-- | drivers/usb/gadget/usbstring.c | 2 | ||||
| -rw-r--r-- | drivers/usb/gadget/zero.c | 2 |
17 files changed, 261 insertions, 212 deletions
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 812c733ba8c..f39050145f1 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -39,7 +39,7 @@ #include <linux/interrupt.h> #include <linux/proc_fs.h> #include <linux/clk.h> -#include <linux/usb_ch9.h> +#include <linux/usb/ch9.h> #include <linux/usb_gadget.h> #include <asm/byteorder.h> @@ -1807,16 +1807,13 @@ static int at91udc_suspend(struct platform_device *pdev, pm_message_t mesg) || !wake || at91_suspend_entering_slow_clock()) { pullup(udc, 0); - disable_irq_wake(udc->udp_irq); + wake = 0; } else enable_irq_wake(udc->udp_irq); - if (udc->board.vbus_pin > 0) { - if (wake) - enable_irq_wake(udc->board.vbus_pin); - else - disable_irq_wake(udc->board.vbus_pin); - } + udc->active_suspend = wake; + if (udc->board.vbus_pin > 0 && wake) + enable_irq_wake(udc->board.vbus_pin); return 0; } @@ -1824,8 +1821,14 @@ static int at91udc_resume(struct platform_device *pdev) { struct at91_udc *udc = platform_get_drvdata(pdev); + if (udc->board.vbus_pin > 0 && udc->active_suspend) + disable_irq_wake(udc->board.vbus_pin); + /* maybe reconnect to host; if so, clocks on */ - pullup(udc, 1); + if (udc->active_suspend) + disable_irq_wake(udc->udp_irq); + else + pullup(udc, 1); return 0; } #else diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h index 677089baa59..7e34e2f864f 100644 --- a/drivers/usb/gadget/at91_udc.h +++ b/drivers/usb/gadget/at91_udc.h @@ -136,6 +136,7 @@ struct at91_udc { unsigned wait_for_addr_ack:1; unsigned wait_for_config_ack:1; unsigned selfpowered:1; + unsigned active_suspend:1; u8 addr; struct at91_udc_data board; struct clk *iclk, *fclk; diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c index 83b4866df9a..d18901b92cd 100644 --- a/drivers/usb/gadget/config.c +++ b/drivers/usb/gadget/config.c @@ -24,7 +24,7 @@ #include <linux/string.h> #include <linux/device.h> -#include <linux/usb_ch9.h> +#include <linux/usb/ch9.h> #include <linux/usb_gadget.h> diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c index 53d584589c2..f28af06905a 100644 --- a/drivers/usb/gadget/epautoconf.c +++ b/drivers/usb/gadget/epautoconf.c @@ -27,7 +27,7 @@ #include <linux/ctype.h> #include <linux/string.h> -#include <linux/usb_ch9.h> +#include <linux/usb/ch9.h> #include <linux/usb_gadget.h> #include "gadget_chips.h" diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index d15bf22b9a0..22e3c944364 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -47,7 +47,7 @@ #include <asm/uaccess.h> #include <asm/unaligned.h> -#include <linux/usb_ch9.h> +#include <linux/usb/ch9.h> #include <linux/usb/cdc.h> #include <linux/usb_gadget.h> @@ -72,9 +72,18 @@ * * There's some hardware that can't talk CDC. We make that hardware * implement a "minimalist" vendor-agnostic CDC core: same framing, but - * link-level setup only requires activating the configuration. - * Linux supports it, but other host operating systems may not. - * (This is a subset of CDC Ethernet.) + * link-level setup only requires activating the configuration. Only the + * endpoint descriptors, and product/vendor IDs, are relevant; no control + * operations are available. Linux supports it, but other host operating + * systems may not. (This is a subset of CDC Ethernet.) + * + * It turns out that if you add a few descriptors to that "CDC Subset", + * (Windows) host side drivers from MCCI can treat it as one submode of + * a proprietary scheme called "SAFE" ... without needing to know about + * specific product/vendor IDs. So we do that, making it easier to use + * those MS-Windows drivers. Those added descriptors make it resemble a + * CDC MDLM device, but they don't change device behavior at all. (See + * MCCI Engineering report 950198 "SAFE Networking Functions".) * * A third option is also in use. Rather than CDC Ethernet, or something * simpler, Microsoft pushes their own approach: RNDIS. The published @@ -254,6 +263,10 @@ MODULE_PARM_DESC(host_addr, "Host Ethernet Address"); #define DEV_CONFIG_CDC #endif +#ifdef CONFIG_USB_GADGET_S3C2410 +#define DEV_CONFIG_CDC +#endif + #ifdef CONFIG_USB_GADGET_AT91 #define DEV_CONFIG_CDC #endif @@ -266,6 +279,10 @@ MODULE_PARM_DESC(host_addr, "Host Ethernet Address"); #define DEV_CONFIG_CDC #endif +#ifdef CONFIG_USB_GADGET_HUSB2DEV +#define DEV_CONFIG_CDC +#endif + /* For CDC-incapable hardware, choose the simple cdc subset. * Anything that talks bulk (without notable bugs) can do this. @@ -283,9 +300,6 @@ MODULE_PARM_DESC(host_addr, "Host Ethernet Address"); #define DEV_CONFIG_SUBSET #endif -#ifdef CONFIG_USB_GADGET_S3C2410 -#define DEV_CONFIG_CDC -#endif /*-------------------------------------------------------------------------*/ @@ -487,8 +501,17 @@ rndis_config = { * endpoint. Both have a "data" interface and two bulk endpoints. * There are also differences in how control requests are handled. * - * RNDIS shares a lot with CDC-Ethernet, since it's a variant of - * the CDC-ACM (modem) spec. + * RNDIS shares a lot with CDC-Ethernet, since it's a variant of the + * CDC-ACM (modem) spec. Unfortunately MSFT's RNDIS driver is buggy; it + * may hang or oops. Since bugfixes (or accurate specs, letting Linux + * work around those bugs) are unlikely to ever come from MSFT, you may + * wish to avoid using RNDIS. + * + * MCCI offers an alternative to RNDIS if you need to connect to Windows + * but have hardware that can't support CDC Ethernet. We add descriptors + * to present the CDC Subset as a (nonconformant) CDC MDLM variant called + * "SAFE". That borrows from both CDC Ethernet and CDC MDLM. You can + * get those drivers from MCCI, or bundled with various products. */ #ifdef DEV_CONFIG_CDC @@ -522,8 +545,6 @@ rndis_control_intf = { }; #endif -#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS) - static const struct usb_cdc_header_desc header_desc = { .bLength = sizeof header_desc, .bDescriptorType = USB_DT_CS_INTERFACE, @@ -532,6 +553,8 @@ static const struct usb_cdc_header_desc header_desc = { .bcdCDC = __constant_cpu_to_le16 (0x0110), }; +#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS) + static const struct usb_cdc_union_desc union_desc = { .bLength = sizeof union_desc, .bDescriptorType = USB_DT_CS_INTERFACE, @@ -564,7 +587,40 @@ static const struct usb_cdc_acm_descriptor acm_descriptor = { #endif -#ifdef DEV_CONFIG_CDC +#ifndef DEV_CONFIG_CDC + +/* "SAFE" loosely follows CDC WMC MDLM, violating the spec in various + * ways: data endpoints live in the control interface, there's no data + * interface, and it's not used to talk to a cell phone radio. + */ + +static const struct usb_cdc_mdlm_desc mdlm_desc = { + .bLength = sizeof mdlm_desc, + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubType = USB_CDC_MDLM_TYPE, + + .bcdVersion = __constant_cpu_to_le16(0x0100), + .bGUID = { + 0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6, + 0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f, + }, +}; + +/* since "usb_cdc_mdlm_detail_desc" is a variable length structure, we + * can't really use its struct. All we do here is say that we're using + * the submode of "SAFE" which directly matches the CDC Subset. + */ +static const u8 mdlm_detail_desc[] = { + 6, + USB_DT_CS_INTERFACE, + USB_CDC_MDLM_DETAIL_TYPE, + + 0, /* "SAFE" */ + 0, /* network control capabilities (none) */ + 0, /* network data capabilities ("raw" encapsulation) */ +}; + +#endif static const struct usb_cdc_ether_desc ether_desc = { .bLength = sizeof ether_desc, @@ -579,7 +635,6 @@ static const struct usb_cdc_ether_desc ether_desc = { .bNumberPowerFilters = 0, }; -#endif #if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS) @@ -672,6 +727,9 @@ rndis_data_intf = { /* * "Simple" CDC-subset option is a simple vendor-neutral model that most * full speed controllers can handle: one interface, two bulk endpoints. + * + * To assist host side drivers, we fancy it up a bit, and add descriptors + * so some host side drivers will understand it as a "SAFE" variant. */ static const struct usb_interface_descriptor @@ -682,8 +740,8 @@ subset_data_intf = { .bInterfaceNumber = 0, .bAlternateSetting = 0, .bNumEndpoints = 2, - .bInterfaceClass = USB_CLASS_VENDOR_SPEC, - .bInterfaceSubClass = 0, + .bInterfaceClass = USB_CLASS_COMM, + .bInterfaceSubClass = USB_CDC_SUBCLASS_MDLM, .bInterfaceProtocol = 0, .iInterface = STRING_DATA, }; @@ -731,10 +789,15 @@ static const struct usb_descriptor_header *fs_eth_function [11] = { static inline void __init fs_subset_descriptors(void) { #ifdef DEV_CONFIG_SUBSET + /* behavior is "CDC Subset"; extra descriptors say "SAFE" */ fs_eth_function[1] = (struct usb_descriptor_header *) &subset_data_intf; - fs_eth_function[2] = (struct usb_descriptor_header *) &fs_source_desc; - fs_eth_function[3] = (struct usb_descriptor_header *) &fs_sink_desc; - fs_eth_function[4] = NULL; + fs_eth_function[2] = (struct usb_descriptor_header *) &header_desc; + fs_eth_function[3] = (struct usb_descriptor_header *) &mdlm_desc; + fs_eth_function[4] = (struct usb_descriptor_header *) &mdlm_detail_desc; + fs_eth_function[5] = (struct usb_descriptor_header *) ðer_desc; + fs_eth_function[6] = (struct usb_descriptor_header *) &fs_source_desc; + fs_eth_function[7] = (struct usb_descriptor_header *) &fs_sink_desc; + fs_eth_function[8] = NULL; #else fs_eth_function[1] = NULL; #endif @@ -828,10 +891,15 @@ static const struct usb_descriptor_header *hs_eth_function [11] = { static inline void __init hs_subset_descriptors(void) { #ifdef DEV_CONFIG_SUBSET + /* behavior is "CDC Subset"; extra descriptors say "SAFE" */ hs_eth_function[1] = (struct usb_descriptor_header *) &subset_data_intf; - hs_eth_function[2] = (struct usb_descriptor_header *) &fs_source_desc; - hs_eth_function[3] = (struct usb_descriptor_header *) &fs_sink_desc; - hs_eth_function[4] = NULL; + hs_eth_function[2] = (struct usb_descriptor_header *) &header_desc; + hs_eth_function[3] = (struct usb_descriptor_header *) &mdlm_desc; + hs_eth_function[4] = (struct usb_descriptor_header *) &mdlm_detail_desc; + hs_eth_function[5] = (struct usb_descriptor_header *) ðer_desc; + hs_eth_function[6] = (struct usb_descriptor_header *) &hs_source_desc; + hs_eth_function[7] = (struct usb_descriptor_header *) &hs_sink_desc; + hs_eth_function[8] = NULL; #else hs_eth_function[1] = NULL; #endif @@ -878,10 +946,8 @@ static char manufacturer [50]; static char product_desc [40] = DRIVER_DESC; static char serial_number [20]; -#ifdef DEV_CONFIG_CDC /* address that the host will use ... usually assigned at random */ static char ethaddr [2 * ETH_ALEN + 1]; -#endif /* static strings, in UTF-8 */ static struct usb_string strings [] = { @@ -889,9 +955,9 @@ static struct usb_string strings [] = { { STRING_PRODUCT, product_desc, }, { STRING_SERIALNUMBER, serial_number, }, { STRING_DATA, "Ethernet Data", }, + { STRING_ETHADDR, ethaddr, }, #ifdef DEV_CONFIG_CDC { STRING_CDC, "CDC Ethernet", }, - { STRING_ETHADDR, ethaddr, }, { STRING_CONTROL, "CDC Communications Control", }, #endif #ifdef DEV_CONFIG_SUBSET @@ -986,10 +1052,10 @@ set_ether_config (struct eth_dev *dev, gfp_t gfp_flags) } #endif - dev->in = ep_desc (dev->gadget, &hs_source_desc, &fs_source_desc); + dev->in = ep_desc(gadget, &hs_source_desc, &fs_source_desc); dev->in_ep->driver_data = dev; - dev->out = ep_desc (dev->gadget, &hs_sink_desc, &fs_sink_desc); + dev->out = ep_desc(gadget, &hs_sink_desc, &fs_sink_desc); dev->out_ep->driver_data = dev; /* With CDC, the host isn't allowed to use these two data @@ -2278,10 +2344,10 @@ eth_bind (struct usb_gadget *gadget) "RNDIS/%s", driver_desc); /* CDC subset ... recognized by Linux since 2.4.10, but Windows - * drivers aren't widely available. + * drivers aren't widely available. (That may be improved by + * supporting one submode of the "SAFE" variant of MDLM.) */ } else if (!cdc) { - device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC; device_desc.idVendor = __constant_cpu_to_le16(SIMPLE_VENDOR_NUM); device_desc.idProduct = @@ -2352,6 +2418,10 @@ autoconf_fail: if (!cdc) { eth_config.bNumInterfaces = 1; eth_config.iConfiguration = STRING_SUBSET; + + /* use functions to set these up, in case we're built to work + * with multiple controllers and must override CDC Ethernet. + */ fs_subset_descriptors(); hs_subset_descriptors(); } @@ -2415,22 +2485,20 @@ autoconf_fail: /* Module params for these addresses should come from ID proms. * The host side address is used with CDC and RNDIS, and commonly - * ends up in a persistent config database. + * ends up in a persistent config database. It's not clear if + * host side code for the SAFE thing cares -- its original BLAN + * thing didn't, Sharp never assigned those addresses on Zaurii. */ if (get_ether_addr(dev_addr, net->dev_addr)) dev_warn(&gadget->dev, "using random %s ethernet address\n", "self"); - if (cdc || rndis) { - if (get_ether_addr(host_addr, dev->host_mac)) - dev_warn(&gadget->dev, - "using random %s ethernet address\n", "host"); -#ifdef DEV_CONFIG_CDC - snprintf (ethaddr, sizeof ethaddr, "%02X%02X%02X%02X%02X%02X", - dev->host_mac [0], dev->host_mac [1], - dev->host_mac [2], dev->host_mac [3], - dev->host_mac [4], dev->host_mac [5]); -#endif - } + if (get_ether_addr(host_addr, dev->host_mac)) + dev_warn(&gadget->dev, + "using random %s ethernet address\n", "host"); + snprintf (ethaddr, sizeof ethaddr, "%02X%02X%02X%02X%02X%02X", + dev->host_mac [0], dev->host_mac [1], + dev->host_mac [2], dev->host_mac [3], + dev->host_mac [4], dev->host_mac [5]); if (rndis) { status = rndis_init(); diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index 72f2ae96fbf..f04a29a4664 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -253,7 +253,7 @@ #include <linux/freezer.h> #include <linux/utsname.h> -#include <linux/usb_ch9.h> +#include <linux/usb/ch9.h> #include <linux/usb_gadget.h> #include "gadget_chips.h" @@ -1148,7 +1148,7 @@ static int ep0_queue(struct fsg_dev *fsg) static void ep0_complete(struct usb_ep *ep, struct usb_request *req) { - struct fsg_dev *fsg = (struct fsg_dev *) ep->driver_data; + struct fsg_dev *fsg = ep->driver_data; if (req->actual > 0) dump_msg(fsg, fsg->ep0req_name, req->buf, req->actual); @@ -1170,8 +1170,8 @@ static void ep0_complete(struct usb_ep *ep, struct usb_request *req) static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req) { - struct fsg_dev *fsg = (struct fsg_dev *) ep->driver_data; - struct fsg_buffhd *bh = (struct fsg_buffhd *) req->context; + struct fsg_dev *fsg = ep->driver_data; + struct fsg_buffhd *bh = req->context; if (req->status || req->actual != req->length) DBG(fsg, "%s --> %d, %u/%u\n", __FUNCTION__, @@ -1190,8 +1190,8 @@ static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req) static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req) { - struct fsg_dev *fsg = (struct fsg_dev *) ep->driver_data; - struct fsg_buffhd *bh = (struct fsg_buffhd *) req->context; + struct fsg_dev *fsg = ep->driver_data; + struct fsg_buffhd *bh = req->context; dump_msg(fsg, "bulk-out", req->buf, req->actual); if (req->status || req->actual != bh->bulk_out_intended_length) @@ -1214,8 +1214,8 @@ static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req) #ifdef CONFIG_USB_FILE_STORAGE_TEST static void intr_in_complete(struct usb_ep *ep, struct usb_request *req) { - struct fsg_dev *fsg = (struct fsg_dev *) ep->driver_data; - struct fsg_buffhd *bh = (struct fsg_buffhd *) req->context; + struct fsg_dev *fsg = ep->driver_data; + struct fsg_buffhd *bh = req->context; if (req->status || req->actual != req->length) DBG(fsg, "%s --> %d, %u/%u\n", __FUNCTION__, @@ -2577,7 +2577,7 @@ static int send_status(struct fsg_dev *fsg) } if (transport_is_bbb()) { - struct bulk_cs_wrap *csw = (struct bulk_cs_wrap *) bh->buf; + struct bulk_cs_wrap *csw = bh->buf; /* Store and send the Bulk-only CSW */ csw->Signature = __constant_cpu_to_le32(USB_BULK_CS_SIG); @@ -2596,8 +2596,7 @@ static int send_status(struct fsg_dev *fsg) return 0; } else { // USB_PR_CBI - struct interrupt_data *buf = (struct interrupt_data *) - bh->buf; + struct interrupt_data *buf = bh->buf; /* Store and send the Interrupt data. UFI sends the ASC * and ASCQ bytes. Everything else sends a Type (which @@ -2982,7 +2981,7 @@ static int do_scsi_command(struct fsg_dev *fsg) static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh) { struct usb_request *req = bh->outreq; - struct bulk_cb_wrap *cbw = (struct bulk_cb_wrap *) req->buf; + struct bulk_cb_wrap *cbw = req->buf; /* Was this a real packet? */ if (req->status) @@ -3428,7 +3427,7 @@ static void handle_exception(struct fsg_dev *fsg) static int fsg_main_thread(void *fsg_) { - struct fsg_dev *fsg = (struct fsg_dev *) fsg_; + struct fsg_dev *fsg = fsg_; /* Allow the thread to be killed by a signal, but set the signal mask * to block everything but INT, TERM, KILL, and USR1. */ @@ -3600,7 +3599,7 @@ static ssize_t show_ro(struct device *dev, struct device_attribute *attr, char * static ssize_t show_file(struct device *dev, struct device_attribute *attr, char *buf) { struct lun *curlun = dev_to_lun(dev); - struct fsg_dev *fsg = (struct fsg_dev *) dev_get_drvdata(dev); + struct fsg_dev *fsg = dev_get_drvdata(dev); char *p; ssize_t rc; @@ -3629,7 +3628,7 @@ static ssize_t store_ro(struct device *dev, struct device_attribute *attr, const { ssize_t rc = count; struct lun *curlun = dev_to_lun(dev); - struct fsg_dev *fsg = (struct fsg_dev *) dev_get_drvdata(dev); + struct fsg_dev *fsg = dev_get_drvdata(dev); int i; if (sscanf(buf, "%d", &i) != 1) @@ -3652,7 +3651,7 @@ static ssize_t store_ro(struct device *dev, struct device_attribute *attr, const static ssize_t store_file(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct lun *curlun = dev_to_lun(dev); - struct fsg_dev *fsg = (struct fsg_dev *) dev_get_drvdata(dev); + struct fsg_dev *fsg = dev_get_drvdata(dev); int rc = 0; if (curlun->prevent_medium_removal && backing_file_is_open(curlun)) { @@ -3700,7 +3699,7 @@ static void fsg_release(struct kref *ref) static void lun_release(struct device *dev) { - struct fsg_dev *fsg = (struct fsg_dev *) dev_get_drvdata(dev); + struct fsg_dev *fsg = dev_get_drvdata(dev); kref_put(&fsg->ref, fsg_release); } diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h index aa80f091072..2e3d6620d21 100644 --- a/drivers/usb/gadget/gadget_chips.h +++ b/drivers/usb/gadget/gadget_chips.h @@ -75,6 +75,12 @@ #define gadget_is_pxa27x(g) 0 #endif +#ifdef CONFIG_USB_GADGET_HUSB2DEV +#define gadget_is_husb2dev(g) !strcmp("husb2_udc", (g)->name) +#else +#define gadget_is_husb2dev(g) 0 +#endif + #ifdef CONFIG_USB_GADGET_S3C2410 #define gadget_is_s3c2410(g) !strcmp("s3c2410_udc", (g)->name) #else @@ -169,5 +175,7 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget) return 0x16; else if (gadget_is_mpc8272(gadget)) return 0x17; + else if (gadget_is_husb2dev(gadget)) + return 0x18; return -ENOENT; } diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c index f1a679656c9..d08a8d0e642 100644 --- a/drivers/usb/gadget/gmidi.c +++ b/drivers/usb/gadget/gmidi.c @@ -35,7 +35,7 @@ #include <sound/initval.h> #include <sound/rawmidi.h> -#include <linux/usb_ch9.h> +#include <linux/usb/ch9.h> #include <linux/usb_gadget.h> #include <linux/usb/audio.h> #include <linux/usb/midi.h> diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c index d0ef1d6b3fa..e873cf48824 100644 --- a/drivers/usb/gadget/goku_udc.c +++ b/drivers/usb/gadget/goku_udc.c @@ -39,7 +39,7 @@ #include <linux/interrupt.h> #include <linux/proc_fs.h> #include <linux/device.h> -#include <linux/usb_ch9.h> +#include <linux/usb/ch9.h> #include <linux/usb_gadget.h> #include <asm/byteorder.h> diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index 3fb1044a4db..34296e79edc 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -20,7 +20,7 @@ */ -// #define DEBUG /* data to help fault diagnosis */ +// #define DEBUG /* data to help fault diagnosis */ // #define VERBOSE /* extra debug messages (success too) */ #include <linux/init.h> @@ -59,11 +59,11 @@ * may serve as a source of device events, used to handle all control * requests other than basic enumeration. * - * - Then either immediately, or after a SET_CONFIGURATION control request, - * ep_config() is called when each /dev/gadget/ep* file is configured - * (by writing endpoint descriptors). Afterwards these files are used - * to write() IN data or to read() OUT data. To halt the endpoint, a - * "wrong direction" request is issued (like reading an IN endpoint). + * - Then, after a SET_CONFIGURATION control request, ep_config() is + * called when each /dev/gadget/ep* file is configured (by writing + * endpoint descriptors). Afterwards these files are used to write() + * IN data or to read() OUT data. To halt the endpoint, a "wrong + * direction" request is issued (like reading an IN endpoint). * * Unlike "usbfs" the only ioctl()s are for things that are rare, and maybe * not possible on all hardware. For example, precise fault handling with @@ -98,16 +98,16 @@ enum ep0_state { * must always write descriptors to initialize the device, then * the device becomes UNCONNECTED until enumeration. */ - STATE_OPENED, + STATE_DEV_OPENED, /* From then on, ep0 fd is in either of two basic modes: * - (UN)CONNECTED: read usb_gadgetfs_event(s) from it * - SETUP: read/write will transfer control data and succeed; * or if "wrong direction", performs protocol stall */ - STATE_UNCONNECTED, - STATE_CONNECTED, - STATE_SETUP, + STATE_DEV_UNCONNECTED, + STATE_DEV_CONNECTED, + STATE_DEV_SETUP, /* UNBOUND means the driver closed ep0, so the device won't be * accessible again (DEV_DISABLED) until all fds are closed. @@ -121,7 +121,7 @@ enum ep0_state { struct dev_data { spinlock_t lock; atomic_t count; - enum ep0_state state; + enum ep0_state state; /* P: lock */ struct usb_gadgetfs_event event [N_EVENT]; unsigned ev_next; struct fasync_struct *fasync; @@ -188,7 +188,6 @@ static struct dev_data *dev_new (void) enum ep_state { STATE_EP_DISABLED = 0, STATE_EP_READY, - STATE_EP_DEFER_ENABLE, STATE_EP_ENABLED, STATE_EP_UNBOUND, }; @@ -313,18 +312,10 @@ nonblock: if ((val = down_interruptible (&epdata->lock)) < 0) return val; -newstate: + switch (epdata->state) { case STATE_EP_ENABLED: break; - case STATE_EP_DEFER_ENABLE: - DBG (epdata->dev, "%s wait for host\n", epdata->name); - if ((val = wait_event_interruptible (epdata->wait, - epdata->state != STATE_EP_DEFER_ENABLE - || epdata->dev->state == STATE_DEV_UNBOUND - )) < 0) - goto fail; - goto newstate; // case STATE_EP_DISABLED: /* "can't happen" */ // case STATE_EP_READY: /* "can't happen" */ default: /* error! */ @@ -333,7 +324,6 @@ newstate: // FALLTHROUGH case STATE_EP_UNBOUND: /* clean disconnect */ val = -ENODEV; -fail: up (&epdata->lock); } return val; @@ -565,29 +555,28 @@ static ssize_t ep_aio_read_retry(struct kiocb *iocb) ssize_t len, total; int i; - /* we "retry" to get the right mm context for this: */ - - /* copy stuff into user buffers */ - total = priv->actual; - len = 0; - for (i=0; i < priv->nr_segs; i++) { - ssize_t this = min((ssize_t)(priv->iv[i].iov_len), total); - - if (copy_to_user(priv->iv[i].iov_base, priv->buf, this)) { - if (len == 0) - len = -EFAULT; - break; - } - - total -= this; - len += this; - if (total == 0) - break; - } - kfree(priv->buf); - kfree(priv); - aio_put_req(iocb); - return len; + /* we "retry" to get the right mm context for this: */ + + /* copy stuff into user buffers */ + total = priv->actual; + len = 0; + for (i=0; i < priv->nr_segs; i++) { + ssize_t this = min((ssize_t)(priv->iv[i].iov_len), total); + + if (copy_to_user(priv->iv[i].iov_base, priv->buf, this)) { + if (len == 0) + len = -EFAULT; + break; + } + + total -= this; + len += this; + if (total == 0) + break; + } + kfree(priv->buf); + kfree(priv); + return len; } static void ep_aio_complete(struct usb_ep *ep, struct usb_request *req) @@ -600,18 +589,17 @@ static void ep_aio_complete(struct usb_ep *ep, struct usb_request *req) spin_lock(&epdata->dev->lock); priv->req = NULL; priv->epdata = NULL; - if (priv->iv == NULL - || unlikely(req->actual == 0) - || unlikely(kiocbIsCancelled(iocb))) { + + /* if this was a write or a read returning no data then we + * don't need to copy anything to userspace, so we can + * complete the aio request immediately. + */ + if (priv->iv == NULL || unlikely(req->actual == 0)) { kfree(req->buf); kfree(priv); iocb->private = NULL; /* aio_complete() reports bytes-transferred _and_ faults */ - if (unlikely(kiocbIsCancelled(iocb))) - aio_put_req(iocb); - else - aio_complete(iocb, - req->actual ? req->actual : req->status, + aio_complete(iocb, req->actual ? req->actual : req->status, req->status); } else { /* retry() won't report both; so we hide some faults */ @@ -636,7 +624,7 @@ ep_aio_rwtail( size_t len, struct ep_data *epdata, const struct iovec *iv, - unsigned long nr_segs + unsigned long nr_segs ) { struct kiocb_priv *priv; @@ -852,9 +840,9 @@ ep_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) break; #endif default: - DBG (data->dev, "unconnected, %s init deferred\n", + DBG(data->dev, "unconnected, %s init abandoned\n", data->name); - data->state = STATE_EP_DEFER_ENABLE; + value = -EINVAL; } if (value == 0) { fd->f_op = &ep_io_operations; @@ -943,22 +931,24 @@ static void clean_req (struct usb_ep *ep, struct usb_request *req) static void ep0_complete (struct usb_ep *ep, struct usb_request *req) { struct dev_data *dev = ep->driver_data; + unsigned long flags; int free = 1; /* for control OUT, data must still get to userspace */ + spin_lock_irqsave(&dev->lock, flags); if (!dev->setup_in) { dev->setup_out_error = (req->status != 0); if (!dev->setup_out_error) free = 0; dev->setup_out_ready = 1; ep0_readable (dev); - } else if (dev->state == STATE_SETUP) - dev->state = STATE_CONNECTED; + } /* clean up as appropriate */ if (free && req->buf != &dev->rbuf) clean_req (ep, req); req->complete = epio_complete; + spin_unlock_irqrestore(&dev->lock, flags); } static int setup_req (struct usb_ep *ep, struct usb_request *req, u16 len) @@ -998,13 +988,13 @@ ep0_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr) } /* control DATA stage */ - if ((state = dev->state) == STATE_SETUP) { + if ((state = dev->state) == STATE_DEV_SETUP) { if (dev->setup_in) { /* stall IN */ VDEBUG(dev, "ep0in stall\n"); (void) usb_ep_set_halt (dev->gadget->ep0); retval = -EL2HLT; - dev->state = STATE_CONNECTED; + dev->state = STATE_DEV_CONNECTED; } else if (len == 0) { /* ack SET_CONFIGURATION etc */ struct usb_ep *ep = dev->gadget->ep0; @@ -1012,7 +1002,7 @@ ep0_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr) if ((retval = setup_req (ep, req, 0)) == 0) retval = usb_ep_queue (ep, req, GFP_ATOMIC); - dev->state = STATE_CONNECTED; + dev->state = STATE_DEV_CONNECTED; /* assume that was SET_CONFIGURATION */ if (dev->current_config) { @@ -1040,6 +1030,13 @@ ep0_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr) spin_lock_irq (&dev->lock); if (retval) goto done; + + if (dev->state != STATE_DEV_SETUP) { + retval = -ECANCELED; + goto done; + } + dev->state = STATE_DEV_CONNECTED; + if (dev->setup_out_error) retval = -EIO; else { @@ -1066,39 +1063,36 @@ scan: /* return queued events right away */ if (dev->ev_next != 0) { unsigned i, n; - int tmp = dev->ev_next; - len = min (len, tmp * sizeof (struct usb_gadgetfs_event)); n = len / sizeof (struct usb_gadgetfs_event); + if (dev->ev_next < n) + n = dev->ev_next; - /* ep0 can't deliver events when STATE_SETUP */ + /* ep0 i/o has special semantics during STATE_DEV_SETUP */ for (i = 0; i < n; i++) { if (dev->event [i].type == GADGETFS_SETUP) { - len = i + 1; - len *= sizeof (struct usb_gadgetfs_event); - n = 0; + dev->state = STATE_DEV_SETUP; + n = i + 1; break; } } spin_unlock_irq (&dev->lock); + len = n * sizeof (struct usb_gadgetfs_event); if (copy_to_user (buf, &dev->event, len)) retval = -EFAULT; else retval = len; if (len > 0) { - len /= sizeof (struct usb_gadgetfs_event); - /* NOTE this doesn't guard against broken drivers; * concurrent ep0 readers may lose events. */ spin_lock_irq (&dev->lock); - dev->ev_next -= len; - if (dev->ev_next != 0) - memmove (&dev->event, &dev->event [len], + if (dev->ev_next > n) { + memmove(&dev->event[0], &dev->event[n], sizeof (struct usb_gadgetfs_event) - * (tmp - len)); - if (n == 0) - dev->state = STATE_SETUP; + * (dev->ev_next - n)); + } + dev->ev_next -= n; spin_unlock_irq (&dev->lock); } return retval; @@ -1113,8 +1107,8 @@ scan: DBG (dev, "fail %s, state %d\n", __FUNCTION__, state); retval = -ESRCH; break; - case STATE_UNCONNECTED: - case STATE_CONNECTED: + case STATE_DEV_UNCONNECTED: + case STATE_DEV_CONNECTED: spin_unlock_irq (&dev->lock); DBG (dev, "%s wait\n", __FUNCTION__); @@ -1141,7 +1135,7 @@ next_event (struct dev_data *dev, enum usb_gadgetfs_event_type type) switch (type) { /* these events purge the queue */ case GADGETFS_DISCONNECT: - if (dev->state == STATE_SETUP) + if (dev->state == STATE_DEV_SETUP) dev->setup_abort = 1; // FALL THROUGH case GADGETFS_CONNECT: @@ -1153,7 +1147,7 @@ next_event (struct dev_data *dev, enum usb_gadgetfs_event_type type) for (i = 0; i != dev->ev_next; i++) { if (dev->event [i].type != type) continue; - DBG (dev, "discard old event %d\n", type); + DBG(dev, "discard old event[%d] %d\n", i, type); dev->ev_next--; if (i == dev->ev_next) break; @@ -1166,9 +1160,9 @@ next_event (struct dev_data *dev, enum usb_gadgetfs_event_type type) default: BUG (); } + VDEBUG(dev, "event[%d] = %d\n", dev->ev_next, type); event = &dev->event [dev->ev_next++]; BUG_ON (dev->ev_next > N_EVENT); - VDEBUG (dev, "ev %d, next %d\n", type, dev->ev_next); memset (event, 0, sizeof *event); event->type = type; return event; @@ -1188,12 +1182,13 @@ ep0_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) retval = -EIDRM; /* data and/or status stage for control request */ - } else if (dev->state == STATE_SETUP) { + } else if (dev->state == STATE_DEV_SETUP) { /* IN DATA+STATUS caller makes len <= wLength */ if (dev->setup_in) { retval = setup_req (dev->gadget->ep0, dev->req, len); if (retval == 0) { + dev->state = STATE_DEV_CONNECTED; spin_unlock_irq (&dev->lock); if (copy_from_user (dev->req->buf, buf, len)) retval = -EFAULT; @@ -1219,7 +1214,7 @@ ep0_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) VDEBUG(dev, "ep0out stall\n"); (void) usb_ep_set_halt (dev->gadget->ep0); retval = -EL2HLT; - dev->state = STATE_CONNECTED; + dev->state = STATE_DEV_CONNECTED; } else { DBG(dev, "bogus ep0out stall!\n"); } @@ -1261,7 +1256,9 @@ dev_release (struct inode *inode, struct file *fd) put_dev (dev); /* other endpoints were all decoupled from this device */ + spin_lock_irq(&dev->lock); dev->state = STATE_DEV_DISABLED; + spin_unlock_irq(&dev->lock); return 0; } @@ -1282,7 +1279,7 @@ ep0_poll (struct file *fd, poll_table *wait) goto out; } - if (dev->state == STATE_SETUP) { + if (dev->state == STATE_DEV_SETUP) { if (dev->setup_in || dev->setup_can_stall) mask = POLLOUT; } else { @@ -1392,52 +1389,29 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) spin_lock (&dev->lock); dev->setup_abort = 0; - if (dev->state == STATE_UNCONNECTED) { - struct usb_ep *ep; - struct ep_data *data; - - dev->state = STATE_CONNECTED; - dev->dev->bMaxPacketSize0 = gadget->ep0->maxpacket; - + if (dev->state == STATE_DEV_UNCONNECTED) { #ifdef CONFIG_USB_GADGET_DUALSPEED if (gadget->speed == USB_SPEED_HIGH && dev->hs_config == 0) { + spin_unlock(&dev->lock); ERROR (dev, "no high speed config??\n"); return -EINVAL; } #endif /* CONFIG_USB_GADGET_DUALSPEED */ + dev->state = STATE_DEV_CONNECTED; + dev->dev->bMaxPacketSize0 = gadget->ep0->maxpacket; + INFO (dev, "connected\n"); event = next_event (dev, GADGETFS_CONNECT); event->u.speed = gadget->speed; ep0_readable (dev); - list_for_each_entry (ep, &gadget->ep_list, ep_list) { - data = ep->driver_data; - /* ... down_trylock (&data->lock) ... */ - if (data->state != STATE_EP_DEFER_ENABLE) - continue; -#ifdef CONFIG_USB_GADGET_DUALSPEED - if (gadget->speed == USB_SPEED_HIGH) - value = usb_ep_enable (ep, &data->hs_desc); - else -#endif /* CONFIG_USB_GADGET_DUALSPEED */ - value = usb_ep_enable (ep, &data->desc); - if (value) { - ERROR (dev, "deferred %s enable --> %d\n", - data->name, value); - continue; - } - data->state = STATE_EP_ENABLED; - wake_up (&data->wait); - DBG (dev, "woke up %s waiters\n", data->name); - } - /* host may have given up waiting for response. we can miss control * requests handled lower down (device/endpoint status and features); * then ep0_{read,write} will report the wrong status. controller * driver will have aborted pending i/o. */ - } else if (dev->state == STATE_SETUP) + } else if (dev->state == STATE_DEV_SETUP) dev->setup_abort = 1; req->buf = dev->rbuf; @@ -1583,7 +1557,7 @@ delegate: } /* proceed with data transfer and status phases? */ - if (value >= 0 && dev->state != STATE_SETUP) { + if (value >= 0 && dev->state != STATE_DEV_SETUP) { req->length = value; req->zero = value < w_length; value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC); @@ -1747,7 +1721,9 @@ gadgetfs_bind (struct usb_gadget *gadget) goto enomem; INFO (dev, "bound to %s driver\n", gadget->name); - dev->state = STATE_UNCONNECTED; + spin_lock_irq(&dev->lock); + dev->state = STATE_DEV_UNCONNECTED; + spin_unlock_irq(&dev->lock); get_dev (dev); return 0; @@ -1762,11 +1738,9 @@ gadgetfs_disconnect (struct usb_gadget *gadget) struct dev_data *dev = get_gadget_data (gadget); spin_lock (&dev->lock); - if (dev->state == STATE_UNCONNECTED) { - DBG (dev, "already unconnected\n"); + if (dev->state == STATE_DEV_UNCONNECTED) goto exit; - } - dev->state = STATE_UNCONNECTED; + dev->state = STATE_DEV_UNCONNECTED; INFO (dev, "disconnected\n"); next_event (dev, GADGETFS_DISCONNECT); @@ -1783,9 +1757,9 @@ gadgetfs_suspend (struct usb_gadget *gadget) INFO (dev, "suspended from state %d\n", dev->state); spin_lock (&dev->lock); switch (dev->state) { - case STATE_SETUP: // VERY odd... host died?? - case STATE_CONNECTED: - case STATE_UNCONNECTED: + case STATE_DEV_SETUP: // VERY odd... host died?? + case STATE_DEV_CONNECTED: + case STATE_DEV_UNCONNECTED: next_event (dev, GADGETFS_SUSPEND); ep0_readable (dev); /* FALLTHROUGH */ @@ -1808,7 +1782,7 @@ static struct usb_gadget_driver gadgetfs_driver = { .disconnect = gadgetfs_disconnect, .suspend = gadgetfs_suspend, - .driver = { + .driver = { .name = (char *) shortname, }, }; @@ -1829,7 +1803,7 @@ static struct usb_gadget_driver probe_driver = { .unbind = gadgetfs_nop, .setup = (void *)gadgetfs_nop, .disconnect = gadgetfs_nop, - .driver = { + .driver = { .name = "nop", }, }; @@ -1849,19 +1823,16 @@ static struct usb_gadget_driver probe_driver = { * . full/low speed config ... all wTotalLength bytes (with interface, * class, altsetting, endpoint, and other descriptors) * . high speed config ... all descriptors, for high speed operation; - * this one's optional except for high-speed hardware + * this one's optional except for high-speed hardware * . device descriptor * - * Endpoints are not yet enabled. Drivers may want to immediately - * initialize them, using the /dev/gadget/ep* files that are available - * as soon as the kernel sees the configuration, or they can wait - * until device configuration and interface altsetting changes create + * Endpoints are not yet enabled. Drivers must wait until device + * configuration and interface altsetting changes create * the need to configure (or unconfigure) them. * * After initialization, the device stays active for as long as that - * $CHIP file is open. Events may then be read from that descriptor, - * such as configuration notifications. More complex drivers will handle - * some control requests in user space. + * $CHIP file is open. Events must then be read from that descriptor, + * such as configuration notifications. */ static int is_valid_config (struct usb_config_descriptor *config) @@ -1884,9 +1855,6 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) u32 tag; char *kbuf; - if (dev->state != STATE_OPENED) - return -EEXIST; - if (len < (USB_DT_CONFIG_SIZE + USB_DT_DEVICE_SIZE + 4)) return -EINVAL; @@ -1978,13 +1946,15 @@ dev_open (struct inode *inode, struct file *fd) struct dev_data *dev = inode->i_private; int value = -EBUSY; + spin_lock_irq(&dev->lock); if (dev->state == STATE_DEV_DISABLED) { dev->ev_next = 0; - dev->state = STATE_OPENED; + dev->state = STATE_DEV_OPENED; fd->private_data = dev; get_dev (dev); value = 0; } + spin_unlock_irq(&dev->lock); return value; } diff --git a/drivers/usb/gadget/lh7a40x_udc.h b/drivers/usb/gadget/lh7a40x_udc.h index e3bb78524c8..b3fe197e1ee 100644 --- a/drivers/usb/gadget/lh7a40x_udc.h +++ b/drivers/usb/gadget/lh7a40x_udc.h @@ -49,7 +49,7 @@ #include <asm/unaligned.h> #include <asm/hardware.h> -#include <linux/usb_ch9.h> +#include <linux/usb/ch9.h> #include <linux/usb_gadget.h> /* diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index 569eb8ccf23..7617ff7bd5a 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -63,7 +63,7 @@ #include <linux/interrupt.h> #include <linux/moduleparam.h> #include <linux/device.h> -#include <linux/usb_ch9.h> +#include <linux/usb/ch9.h> #include <linux/usb_gadget.h> #include <asm/byteorder.h> diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index cdcfd42843d..140104341db 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -38,7 +38,7 @@ #include <linux/mm.h> #include <linux/moduleparam.h> #include <linux/platform_device.h> -#include <linux/usb_ch9.h> +#include <linux/usb/ch9.h> #include <linux/usb_gadget.h> #include <linux/usb/otg.h> #include <linux/dma-mapping.h> diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index b78de969466..0d225369847 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -56,7 +56,7 @@ #include <asm/arch/pxa-regs.h> #endif -#include <linux/usb_ch9.h> +#include <linux/usb/ch9.h> #include <linux/usb_gadget.h> #include <asm/arch/udc.h> diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c index f8a3ec64635..6c742a90922 100644 --- a/drivers/usb/gadget/serial.c +++ b/drivers/usb/gadget/serial.c @@ -43,7 +43,7 @@ #include <asm/unaligned.h> #include <asm/uaccess.h> -#include <linux/usb_ch9.h> +#include <linux/usb/ch9.h> #include <linux/usb/cdc.h> #include <linux/usb_gadget.h> diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c index b1735767660..3459ea6c6c0 100644 --- a/drivers/usb/gadget/usbstring.c +++ b/drivers/usb/gadget/usbstring.c @@ -14,7 +14,7 @@ #include <linux/device.h> #include <linux/init.h> -#include <linux/usb_ch9.h> +#include <linux/usb/ch9.h> #include <linux/usb_gadget.h> #include <asm/unaligned.h> diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index 40710ea1b49..ebe04e0d287 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -84,7 +84,7 @@ #include <asm/system.h> #include <asm/unaligned.h> -#include <linux/usb_ch9.h> +#include <linux/usb/ch9.h> #include <linux/usb_gadget.h> #include "gadget_chips.h" |