aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/gadget
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/gadget')
-rw-r--r--drivers/usb/gadget/Kconfig389
-rw-r--r--drivers/usb/gadget/Makefile30
-rw-r--r--drivers/usb/gadget/config.c117
-rw-r--r--drivers/usb/gadget/dummy_hcd.c1793
-rw-r--r--drivers/usb/gadget/epautoconf.c310
-rw-r--r--drivers/usb/gadget/ether.c2660
-rw-r--r--drivers/usb/gadget/file_storage.c4139
-rw-r--r--drivers/usb/gadget/gadget_chips.h92
-rw-r--r--drivers/usb/gadget/goku_udc.c1984
-rw-r--r--drivers/usb/gadget/goku_udc.h290
-rw-r--r--drivers/usb/gadget/inode.c2110
-rw-r--r--drivers/usb/gadget/lh7a40x_udc.c2167
-rw-r--r--drivers/usb/gadget/lh7a40x_udc.h261
-rw-r--r--drivers/usb/gadget/ndis.h217
-rw-r--r--drivers/usb/gadget/net2280.c2967
-rw-r--r--drivers/usb/gadget/net2280.h728
-rw-r--r--drivers/usb/gadget/omap_udc.c2872
-rw-r--r--drivers/usb/gadget/omap_udc.h208
-rw-r--r--drivers/usb/gadget/pxa2xx_udc.c2648
-rw-r--r--drivers/usb/gadget/pxa2xx_udc.h320
-rw-r--r--drivers/usb/gadget/rndis.c1428
-rw-r--r--drivers/usb/gadget/rndis.h348
-rw-r--r--drivers/usb/gadget/serial.c2436
-rw-r--r--drivers/usb/gadget/usbstring.c136
-rw-r--r--drivers/usb/gadget/zero.c1357
25 files changed, 32007 insertions, 0 deletions
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
new file mode 100644
index 00000000000..3b24f9f2c23
--- /dev/null
+++ b/drivers/usb/gadget/Kconfig
@@ -0,0 +1,389 @@
+#
+# USB Gadget support on a system involves
+# (a) a peripheral controller, and
+# (b) the gadget driver using it.
+#
+# NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!
+#
+# - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
+# - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
+# - Some systems have both kinds of of controller.
+#
+# With help from a special transceiver and a "Mini-AB" jack, systems with
+# both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
+#
+menu "USB Gadget Support"
+
+config USB_GADGET
+ tristate "Support for USB Gadgets"
+ help
+ USB is a master/slave protocol, organized with one master
+ host (such as a PC) controlling up to 127 peripheral devices.
+ The USB hardware is asymmetric, which makes it easier to set up:
+ you can't connect a "to-the-host" connector to a peripheral.
+
+ Linux can run in the host, or in the peripheral. In both cases
+ you need a low level bus controller driver, and some software
+ talking to it. Peripheral controllers are often discrete silicon,
+ or are integrated with the CPU in a microcontroller. The more
+ familiar host side controllers have names like like "EHCI", "OHCI",
+ or "UHCI", and are usually integrated into southbridges on PC
+ motherboards.
+
+ Enable this configuration option if you want to run Linux inside
+ a USB peripheral device. Configure one hardware driver for your
+ peripheral/device side bus controller, and a "gadget driver" for
+ your peripheral protocol. (If you use modular gadget drivers,
+ you may configure more than one.)
+
+ If in doubt, say "N" and don't enable these drivers; most people
+ don't have this kind of hardware (except maybe inside Linux PDAs).
+
+ For more information, see <http://www.linux-usb.org/gadget> and
+ the kernel DocBook documentation for this API.
+
+config USB_GADGET_DEBUG_FILES
+ boolean "Debugging information files"
+ depends on USB_GADGET && PROC_FS
+ help
+ Some of the drivers in the "gadget" framework can expose
+ debugging information in files such as /proc/driver/udc
+ (for a peripheral controller). The information in these
+ files may help when you're troubleshooting or bringing up a
+ driver on a new board. Enable these files by choosing "Y"
+ here. If in doubt, or to conserve kernel memory, say "N".
+
+#
+# USB Peripheral Controller Support
+#
+choice
+ prompt "USB Peripheral Controller"
+ depends on USB_GADGET
+ help
+ A USB device uses a controller to talk to its host.
+ Systems should have only one such upstream link.
+ Many controller drivers are platform-specific; these
+ often need board-specific hooks.
+
+config USB_GADGET_NET2280
+ boolean "NetChip 2280"
+ depends on PCI
+ select USB_GADGET_DUALSPEED
+ help
+ NetChip 2280 is a PCI based USB peripheral controller which
+ supports both full and high speed USB 2.0 data transfers.
+
+ It has six configurable endpoints, as well as endpoint zero
+ (for control transfers) and several endpoints with dedicated
+ functions.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "net2280" and force all
+ gadget drivers to also be dynamically linked.
+
+config USB_NET2280
+ tristate
+ depends on USB_GADGET_NET2280
+ default USB_GADGET
+
+config USB_GADGET_PXA2XX
+ boolean "PXA 25x or IXP 4xx"
+ depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
+ help
+ Intel's PXA 25x series XScale ARM-5TE processors include
+ an integrated full speed USB 1.1 device controller. The
+ controller in the IXP 4xx series is register-compatible.
+
+ It has fifteen fixed-function endpoints, as well as endpoint
+ zero (for control transfers).
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "pxa2xx_udc" and force all
+ gadget drivers to also be dynamically linked.
+
+config USB_PXA2XX
+ tristate
+ depends on USB_GADGET_PXA2XX
+ default USB_GADGET
+
+# if there's only one gadget driver, using only two bulk endpoints,
+# don't waste memory for the other endpoints
+config USB_PXA2XX_SMALL
+ depends on USB_GADGET_PXA2XX
+ bool
+ default n if USB_ETH_RNDIS
+ default y if USB_ZERO
+ default y if USB_ETH
+ default y if USB_G_SERIAL
+
+config USB_GADGET_GOKU
+ boolean "Toshiba TC86C001 'Goku-S'"
+ depends on PCI
+ help
+ The Toshiba TC86C001 is a PCI device which includes controllers
+ for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI).
+
+ The device controller has three configurable (bulk or interrupt)
+ endpoints, plus endpoint zero (for control transfers).
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "goku_udc" and to force all
+ gadget drivers to also be dynamically linked.
+
+config USB_GOKU
+ tristate
+ depends on USB_GADGET_GOKU
+ default USB_GADGET
+
+
+config USB_GADGET_LH7A40X
+ boolean "LH7A40X"
+ depends on ARCH_LH7A40X
+ help
+ This driver provides USB Device Controller driver for LH7A40x
+
+config USB_LH7A40X
+ tristate
+ depends on USB_GADGET_LH7A40X
+ default USB_GADGET
+
+
+config USB_GADGET_OMAP
+ boolean "OMAP USB Device Controller"
+ depends on ARCH_OMAP
+ select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3
+ help
+ Many Texas Instruments OMAP processors have flexible full
+ speed USB device controllers, with support for up to 30
+ endpoints (plus endpoint zero). This driver supports the
+ controller in the OMAP 1611, and should work with controllers
+ in other OMAP processors too, given minor tweaks.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "omap_udc" and force all
+ gadget drivers to also be dynamically linked.
+
+config USB_OMAP
+ tristate
+ depends on USB_GADGET_OMAP
+ default USB_GADGET
+
+config USB_OTG
+ boolean "OTG Support"
+ depends on USB_GADGET_OMAP && ARCH_OMAP_OTG && USB_OHCI_HCD
+ help
+ The most notable feature of USB OTG is support for a
+ "Dual-Role" device, which can act as either a device
+ or a host. The initial role choice can be changed
+ later, when two dual-role devices talk to each other.
+
+ Select this only if your OMAP board has a Mini-AB connector.
+
+
+config USB_GADGET_DUMMY_HCD
+ boolean "Dummy HCD (DEVELOPMENT)"
+ depends on USB && EXPERIMENTAL
+ select USB_GADGET_DUALSPEED
+ help
+ This host controller driver emulates USB, looping all data transfer
+ requests back to a USB "gadget driver" in the same host. The host
+ side is the master; the gadget side is the slave. Gadget drivers
+ can be high, full, or low speed; and they have access to endpoints
+ like those from NET2280, PXA2xx, or SA1100 hardware.
+
+ This may help in some stages of creating a driver to embed in a
+ Linux device, since it lets you debug several parts of the gadget
+ driver without its hardware or drivers being involved.
+
+ Since such a gadget side driver needs to interoperate with a host
+ side Linux-USB device driver, this may help to debug both sides
+ of a USB protocol stack.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "dummy_hcd" and force all
+ gadget drivers to also be dynamically linked.
+
+config USB_DUMMY_HCD
+ tristate
+ depends on USB_GADGET_DUMMY_HCD
+ default USB_GADGET
+
+# NOTE: Please keep dummy_hcd LAST so that "real hardware" appears
+# first and will be selected by default.
+
+endchoice
+
+config USB_GADGET_DUALSPEED
+ bool
+ depends on USB_GADGET
+ default n
+ help
+ Means that gadget drivers should include extra descriptors
+ and code to handle dual-speed controllers.
+
+#
+# USB Gadget Drivers
+#
+choice
+ tristate "USB Gadget Drivers"
+ depends on USB_GADGET
+ default USB_ETH
+ help
+ A Linux "Gadget Driver" talks to the USB Peripheral Controller
+ driver through the abstract "gadget" API. Some other operating
+ systems call these "client" drivers, of which "class drivers"
+ are a subset (implementing a USB device class specification).
+ A gadget driver implements one or more USB functions using
+ the peripheral hardware.
+
+ Gadget drivers are hardware-neutral, or "platform independent",
+ except that they sometimes must understand quirks or limitations
+ of the particular controllers they work with. For example, when
+ a controller doesn't support alternate configurations or provide
+ enough of the right types of endpoints, the gadget driver might
+ not be able work with that controller, or might need to implement
+ a less common variant of a device class protocol.
+
+# this first set of drivers all depend on bulk-capable hardware.
+
+config USB_ZERO
+ tristate "Gadget Zero (DEVELOPMENT)"
+ depends on EXPERIMENTAL
+ help
+ Gadget Zero is a two-configuration device. It either sinks and
+ sources bulk data; or it loops back a configurable number of
+ transfers. It also implements control requests, for "chapter 9"
+ conformance. The driver needs only two bulk-capable endpoints, so
+ it can work on top of most device-side usb controllers. It's
+ useful for testing, and is also a working example showing how
+ USB "gadget drivers" can be written.
+
+ Make this be the first driver you try using on top of any new
+ USB peripheral controller driver. Then you can use host-side
+ test software, like the "usbtest" driver, to put your hardware
+ and its driver through a basic set of functional tests.
+
+ Gadget Zero also works with the host-side "usb-skeleton" driver,
+ and with many kinds of host-side test software. You may need
+ to tweak product and vendor IDs before host software knows about
+ this device, and arrange to select an appropriate configuration.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_zero".
+
+config USB_ZERO_HNPTEST
+ boolean "HNP Test Device"
+ depends on USB_ZERO && USB_OTG
+ help
+ You can configure this device to enumerate using the device
+ identifiers of the USB-OTG test device. That means that when
+ this gadget connects to another OTG device, with this one using
+ the "B-Peripheral" role, that device will use HNP to let this
+ one serve as the USB host instead (in the "B-Host" role).
+
+config USB_ETH
+ tristate "Ethernet Gadget (with CDC Ethernet support)"
+ depends on NET
+ help
+ This driver implements Ethernet style communication, in either
+ of two ways:
+
+ - The "Communication Device Class" (CDC) Ethernet Control Model.
+ That protocol is often avoided with pure Ethernet adapters, in
+ favor of simpler vendor-specific hardware, but is widely
+ supported by firmware for smart network devices.
+
+ - On hardware can't implement that protocol, a simple CDC subset
+ is used, placing fewer demands on USB.
+
+ RNDIS support is a third option, more demanding than that subset.
+
+ Within the USB device, this gadget driver exposes a network device
+ "usbX", where X depends on what other networking devices you have.
+ Treat it like a two-node Ethernet link: host, and gadget.
+
+ The Linux-USB host-side "usbnet" driver interoperates with this
+ driver, so that deep I/O queues can be supported. On 2.4 kernels,
+ use "CDCEther" instead, if you're using the CDC option. That CDC
+ mode should also interoperate with standard CDC Ethernet class
+ drivers on other host operating systems.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_ether".
+
+config USB_ETH_RNDIS
+ bool "RNDIS support (EXPERIMENTAL)"
+ depends on USB_ETH && EXPERIMENTAL
+ default y
+ help
+ Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol,
+ and Microsoft provides redistributable binary RNDIS drivers for
+ older versions of Windows.
+
+ If you say "y" here, the Ethernet gadget driver will try to provide
+ a second device configuration, supporting RNDIS to talk to such
+ Microsoft USB hosts.
+
+ To make MS-Windows work with this, use Documentation/usb/linux.inf
+ as the "driver info file". For versions of MS-Windows older than
+ XP, you'll need to download drivers from Microsoft's website; a URL
+ is given in comments found in that info file.
+
+config USB_GADGETFS
+ tristate "Gadget Filesystem (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ help
+ This driver provides a filesystem based API that lets user mode
+ programs implement a single-configuration USB device, including
+ endpoint I/O and control requests that don't relate to enumeration.
+ All endpoints, transfer speeds, and transfer types supported by
+ the hardware are available, through read() and write() calls.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "gadgetfs".
+
+config USB_FILE_STORAGE
+ tristate "File-backed Storage Gadget"
+ help
+ The File-backed Storage Gadget acts as a USB Mass Storage
+ disk drive. As its storage repository it can use a regular
+ file or a block device (in much the same way as the "loop"
+ device driver), specified as a module parameter.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_file_storage".
+
+config USB_FILE_STORAGE_TEST
+ bool "File-backed Storage Gadget testing version"
+ depends on USB_FILE_STORAGE
+ default n
+ help
+ Say "y" to generate the larger testing version of the
+ File-backed Storage Gadget, useful for probing the
+ behavior of USB Mass Storage hosts. Not needed for
+ normal operation.
+
+config USB_G_SERIAL
+ tristate "Serial Gadget (with CDC ACM support)"
+ help
+ The Serial Gadget talks to the Linux-USB generic serial driver.
+ This driver supports a CDC-ACM module option, which can be used
+ to interoperate with MS-Windows hosts or with the Linux-USB
+ "cdc-acm" driver.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_serial".
+
+ For more information, see Documentation/usb/gadget_serial.txt
+ which includes instructions and a "driver info file" needed to
+ make MS-Windows work with this driver.
+
+
+# put drivers that need isochronous transfer support (for audio
+# or video class gadget drivers), or specific hardware, here.
+
+# - none yet
+
+endchoice
+
+endmenu
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
new file mode 100644
index 00000000000..d5fd04d886e
--- /dev/null
+++ b/drivers/usb/gadget/Makefile
@@ -0,0 +1,30 @@
+#
+# USB peripheral controller drivers
+#
+obj-$(CONFIG_USB_DUMMY_HCD) += dummy_hcd.o
+obj-$(CONFIG_USB_NET2280) += net2280.o
+obj-$(CONFIG_USB_PXA2XX) += pxa2xx_udc.o
+obj-$(CONFIG_USB_GOKU) += goku_udc.o
+obj-$(CONFIG_USB_OMAP) += omap_udc.o
+obj-$(CONFIG_USB_LH7A40X) += lh7a40x_udc.o
+
+#
+# USB gadget drivers
+#
+g_zero-objs := zero.o usbstring.o config.o epautoconf.o
+g_ether-objs := ether.o usbstring.o config.o epautoconf.o
+g_serial-objs := serial.o usbstring.o config.o epautoconf.o
+gadgetfs-objs := inode.o
+g_file_storage-objs := file_storage.o usbstring.o config.o \
+ epautoconf.o
+
+ifeq ($(CONFIG_USB_ETH_RNDIS),y)
+ g_ether-objs += rndis.o
+endif
+
+obj-$(CONFIG_USB_ZERO) += g_zero.o
+obj-$(CONFIG_USB_ETH) += g_ether.o
+obj-$(CONFIG_USB_GADGETFS) += gadgetfs.o
+obj-$(CONFIG_USB_FILE_STORAGE) += g_file_storage.o
+obj-$(CONFIG_USB_G_SERIAL) += g_serial.o
+
diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c
new file mode 100644
index 00000000000..83b4866df9a
--- /dev/null
+++ b/drivers/usb/gadget/config.c
@@ -0,0 +1,117 @@
+/*
+ * usb/gadget/config.c -- simplify building config descriptors
+ *
+ * Copyright (C) 2003 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/string.h>
+#include <linux/device.h>
+
+#include <linux/usb_ch9.h>
+#include <linux/usb_gadget.h>
+
+
+/**
+ * usb_descriptor_fillbuf - fill buffer with descriptors
+ * @buf: Buffer to be filled
+ * @buflen: Size of buf
+ * @src: Array of descriptor pointers, terminated by null pointer.
+ *
+ * Copies descriptors into the buffer, returning the length or a
+ * negative error code if they can't all be copied. Useful when
+ * assembling descriptors for an associated set of interfaces used
+ * as part of configuring a composite device; or in other cases where
+ * sets of descriptors need to be marshaled.
+ */
+int
+usb_descriptor_fillbuf(void *buf, unsigned buflen,
+ const struct usb_descriptor_header **src)
+{
+ u8 *dest = buf;
+
+ if (!src)
+ return -EINVAL;
+
+ /* fill buffer from src[] until null descriptor ptr */
+ for (; 0 != *src; src++) {
+ unsigned len = (*src)->bLength;
+
+ if (len > buflen)
+ return -EINVAL;
+ memcpy(dest, *src, len);
+ buflen -= len;
+ dest += len;
+ }
+ return dest - (u8 *)buf;
+}
+
+
+/**
+ * usb_gadget_config_buf - builts a complete configuration descriptor
+ * @config: Header for the descriptor, including characteristics such
+ * as power requirements and number of interfaces.
+ * @desc: Null-terminated vector of pointers to the descriptors (interface,
+ * endpoint, etc) defining all functions in this device configuration.
+ * @buf: Buffer for the resulting configuration descriptor.
+ * @length: Length of buffer. If this is not big enough to hold the
+ * entire configuration descriptor, an error code will be returned.
+ *
+ * This copies descriptors into the response buffer, building a descriptor
+ * for that configuration. It returns the buffer length or a negative
+ * status code. The config.wTotalLength field is set to match the length
+ * of the result, but other descriptor fields (including power usage and
+ * interface count) must be set by the caller.
+ *
+ * Gadget drivers could use this when constructing a config descriptor
+ * in response to USB_REQ_GET_DESCRIPTOR. They will need to patch the
+ * resulting bDescriptorType value if USB_DT_OTHER_SPEED_CONFIG is needed.
+ */
+int usb_gadget_config_buf(
+ const struct usb_config_descriptor *config,
+ void *buf,
+ unsigned length,
+ const struct usb_descriptor_header **desc
+)
+{
+ struct usb_config_descriptor *cp = buf;
+ int len;
+
+ /* config descriptor first */
+ if (length < USB_DT_CONFIG_SIZE || !desc)
+ return -EINVAL;
+ *cp = *config;
+
+ /* then interface/endpoint/class/vendor/... */
+ len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8*)buf,
+ length - USB_DT_CONFIG_SIZE, desc);
+ if (len < 0)
+ return len;
+ len += USB_DT_CONFIG_SIZE;
+ if (len > 0xffff)
+ return -EINVAL;
+
+ /* patch up the config descriptor */
+ cp->bLength = USB_DT_CONFIG_SIZE;
+ cp->bDescriptorType = USB_DT_CONFIG;
+ cp->wTotalLength = cpu_to_le16(len);
+ cp->bmAttributes |= USB_CONFIG_ATT_ONE;
+ return len;
+}
+
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
new file mode 100644
index 00000000000..8ef8a9cd9ac
--- /dev/null
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -0,0 +1,1793 @@
+/*
+ * dummy_hcd.c -- Dummy/Loopback USB host and device emulator driver.
+ *
+ * Maintainer: Alan Stern <stern@rowland.harvard.edu>
+ *
+ * Copyright (C) 2003 David Brownell
+ * Copyright (C) 2003-2005 Alan Stern
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+
+/*
+ * This exposes a device side "USB gadget" API, driven by requests to a
+ * Linux-USB host controller driver. USB traffic is simulated; there's
+ * no need for USB hardware. Use this with two other drivers:
+ *
+ * - Gadget driver, responding to requests (slave);
+ * - Host-side device driver, as already familiar in Linux.
+ *
+ * Having this all in one kernel can help some stages of development,
+ * bypassing some hardware (and driver) issues. UML could help too.
+ */
+
+#define DEBUG
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/version.h>
+
+#include <linux/usb.h>
+#include <linux/usb_gadget.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/unaligned.h>
+
+
+#include "../core/hcd.h"
+
+
+#define DRIVER_DESC "USB Host+Gadget Emulator"
+#define DRIVER_VERSION "17 Dec 2004"
+
+static const char driver_name [] = "dummy_hcd";
+static const char driver_desc [] = "USB Host+Gadget Emulator";
+
+static const char gadget_name [] = "dummy_udc";
+
+MODULE_DESCRIPTION (DRIVER_DESC);
+MODULE_AUTHOR ("David Brownell");
+MODULE_LICENSE ("GPL");
+
+/*-------------------------------------------------------------------------*/
+
+/* gadget side driver data structres */
+struct dummy_ep {
+ struct list_head queue;
+ unsigned long last_io; /* jiffies timestamp */
+ struct usb_gadget *gadget;
+ const struct usb_endpoint_descriptor *desc;
+ struct usb_ep ep;
+ unsigned halted : 1;
+ unsigned already_seen : 1;
+ unsigned setup_stage : 1;
+};
+
+struct dummy_request {
+ struct list_head queue; /* ep's requests */
+ struct usb_request req;
+};
+
+static inline struct dummy_ep *usb_ep_to_dummy_ep (struct usb_ep *_ep)
+{
+ return container_of (_ep, struct dummy_ep, ep);
+}
+
+static inline struct dummy_request *usb_request_to_dummy_request
+ (struct usb_request *_req)
+{
+ return container_of (_req, struct dummy_request, req);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Every device has ep0 for control requests, plus up to 30 more endpoints,
+ * in one of two types:
+ *
+ * - Configurable: direction (in/out), type (bulk, iso, etc), and endpoint
+ * number can be changed. Names like "ep-a" are used for this type.
+ *
+ * - Fixed Function: in other cases. some characteristics may be mutable;
+ * that'd be hardware-specific. Names like "ep12out-bulk" are used.
+ *
+ * Gadget drivers are responsible for not setting up conflicting endpoint
+ * configurations, illegal or unsupported packet lengths, and so on.
+ */
+
+static const char ep0name [] = "ep0";
+
+static const char *const ep_name [] = {
+ ep0name, /* everyone has ep0 */
+
+ /* act like a net2280: high speed, six configurable endpoints */
+ "ep-a", "ep-b", "ep-c", "ep-d", "ep-e", "ep-f",
+
+ /* or like pxa250: fifteen fixed function endpoints */
+ "ep1in-bulk", "ep2out-bulk", "ep3in-iso", "ep4out-iso", "ep5in-int",
+ "ep6in-bulk", "ep7out-bulk", "ep8in-iso", "ep9out-iso", "ep10in-int",
+ "ep11in-bulk", "ep12out-bulk", "ep13in-iso", "ep14out-iso",
+ "ep15in-int",
+
+ /* or like sa1100: two fixed function endpoints */
+ "ep1out-bulk", "ep2in-bulk",
+};
+#define DUMMY_ENDPOINTS (sizeof(ep_name)/sizeof(char *))
+
+#define FIFO_SIZE 64
+
+struct urbp {
+ struct urb *urb;
+ struct list_head urbp_list;
+};
+
+struct dummy {
+ spinlock_t lock;
+
+ /*
+ * SLAVE/GADGET side support
+ */
+ struct dummy_ep ep [DUMMY_ENDPOINTS];
+ int address;
+ struct usb_gadget gadget;
+ struct usb_gadget_driver *driver;
+ struct dummy_request fifo_req;
+ u8 fifo_buf [FIFO_SIZE];
+ u16 devstatus;
+
+ /*
+ * MASTER/HOST side support
+ */
+ struct timer_list timer;
+ u32 port_status;
+ unsigned resuming:1;
+ unsigned long re_timeout;
+
+ struct usb_device *udev;
+ struct list_head urbp_list;
+};
+
+static inline struct dummy *hcd_to_dummy (struct usb_hcd *hcd)
+{
+ return (struct dummy *) (hcd->hcd_priv);
+}
+
+static inline struct usb_hcd *dummy_to_hcd (struct dummy *dum)
+{
+ return container_of((void *) dum, struct usb_hcd, hcd_priv);
+}
+
+static inline struct device *dummy_dev (struct dummy *dum)
+{
+ return dummy_to_hcd(dum)->self.controller;
+}
+
+static inline struct dummy *ep_to_dummy (struct dummy_ep *ep)
+{
+ return container_of (ep->gadget, struct dummy, gadget);
+}
+
+static inline struct dummy *gadget_to_dummy (struct usb_gadget *gadget)
+{
+ return container_of (gadget, struct dummy, gadget);
+}
+
+static inline struct dummy *gadget_dev_to_dummy (struct device *dev)
+{
+ return container_of (dev, struct dummy, gadget.dev);
+}
+
+static struct dummy *the_controller;
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * This "hardware" may look a bit odd in diagnostics since it's got both
+ * host and device sides; and it binds different drivers to each side.
+ */
+static struct platform_device the_pdev;
+
+static struct device_driver dummy_driver = {
+ .name = (char *) driver_name,
+ .bus = &platform_bus_type,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* SLAVE/GADGET SIDE DRIVER
+ *
+ * This only tracks gadget state. All the work is done when the host
+ * side tries some (emulated) i/o operation. Real device controller
+ * drivers would do real i/o using dma, fifos, irqs, timers, etc.
+ */
+
+#define is_enabled(dum) \
+ (dum->port_status & USB_PORT_STAT_ENABLE)
+
+static int
+dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
+{
+ struct dummy *dum;
+ struct dummy_ep *ep;
+ unsigned max;
+ int retval;
+
+ ep = usb_ep_to_dummy_ep (_ep);
+ if (!_ep || !desc || ep->desc || _ep->name == ep0name
+ || desc->bDescriptorType != USB_DT_ENDPOINT)
+ return -EINVAL;
+ dum = ep_to_dummy (ep);
+ if (!dum->driver || !is_enabled (dum))
+ return -ESHUTDOWN;
+ max = le16_to_cpu(desc->wMaxPacketSize) & 0x3ff;
+
+ /* drivers must not request bad settings, since lower levels
+ * (hardware or its drivers) may not check. some endpoints
+ * can't do iso, many have maxpacket limitations, etc.
+ *
+ * since this "hardware" driver is here to help debugging, we
+ * have some extra sanity checks. (there could be more though,
+ * especially for "ep9out" style fixed function ones.)
+ */
+ retval = -EINVAL;
+ switch (desc->bmAttributes & 0x03) {
+ case USB_ENDPOINT_XFER_BULK:
+ if (strstr (ep->ep.name, "-iso")
+ || strstr (ep->ep.name, "-int")) {
+ goto done;
+ }
+ switch (dum->gadget.speed) {
+ case USB_SPEED_HIGH:
+ if (max == 512)
+ break;
+ /* conserve return statements */
+ default:
+ switch (max) {
+ case 8: case 16: case 32: case 64:
+ /* we'll fake any legal size */
+ break;
+ default:
+ case USB_SPEED_LOW:
+ goto done;
+ }
+ }
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ if (strstr (ep->ep.name, "-iso")) /* bulk is ok */
+ goto done;
+ /* real hardware might not handle all packet sizes */
+ switch (dum->gadget.speed) {
+ case USB_SPEED_HIGH:
+ if (max <= 1024)
+ break;
+ /* save a return statement */
+ case USB_SPEED_FULL:
+ if (max <= 64)
+ break;
+ /* save a return statement */
+ default:
+ if (max <= 8)
+ break;
+ goto done;
+ }
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ if (strstr (ep->ep.name, "-bulk")
+ || strstr (ep->ep.name, "-int"))
+ goto done;
+ /* real hardware might not handle all packet sizes */
+ switch (dum->gadget.speed) {
+ case USB_SPEED_HIGH:
+ if (max <= 1024)
+ break;
+ /* save a return statement */
+ case USB_SPEED_FULL:
+ if (max <= 1023)
+ break;
+ /* save a return statement */
+ default:
+ goto done;
+ }
+ break;
+ default:
+ /* few chips support control except on ep0 */
+ goto done;
+ }
+
+ _ep->maxpacket = max;
+ ep->desc = desc;
+
+ dev_dbg (dummy_dev(dum), "enabled %s (ep%d%s-%s) maxpacket %d\n",
+ _ep->name,
+ desc->bEndpointAddress & 0x0f,
+ (desc->bEndpointAddress & USB_DIR_IN) ? "in" : "out",
+ ({ char *val;
+ switch (desc->bmAttributes & 0x03) {
+ case USB_ENDPOINT_XFER_BULK: val = "bulk"; break;
+ case USB_ENDPOINT_XFER_ISOC: val = "iso"; break;
+ case USB_ENDPOINT_XFER_INT: val = "intr"; break;
+ default: val = "ctrl"; break;
+ }; val; }),
+ max);
+
+ /* at this point real hardware should be NAKing transfers
+ * to that endpoint, until a buffer is queued to it.
+ */
+ retval = 0;
+done:
+ return retval;
+}
+
+/* called with spinlock held */
+static void nuke (struct dummy *dum, struct dummy_ep *ep)
+{
+ while (!list_empty (&ep->queue)) {
+ struct dummy_request *req;
+
+ req = list_entry (ep->queue.next, struct dummy_request, queue);
+ list_del_init (&req->queue);
+ req->req.status = -ESHUTDOWN;
+
+ spin_unlock (&dum->lock);
+ req->req.complete (&ep->ep, &req->req);
+ spin_lock (&dum->lock);
+ }
+}
+
+static int dummy_disable (struct usb_ep *_ep)
+{
+ struct dummy_ep *ep;
+ struct dummy *dum;
+ unsigned long flags;
+ int retval;
+
+ ep = usb_ep_to_dummy_ep (_ep);
+ if (!_ep || !ep->desc || _ep->name == ep0name)
+ return -EINVAL;
+ dum = ep_to_dummy (ep);
+
+ spin_lock_irqsave (&dum->lock, flags);
+ ep->desc = NULL;
+ retval = 0;
+ nuke (dum, ep);
+ spin_unlock_irqrestore (&dum->lock, flags);
+
+ dev_dbg (dummy_dev(dum), "disabled %s\n", _ep->name);
+ return retval;
+}
+
+static struct usb_request *
+dummy_alloc_request (struct usb_ep *_ep, int mem_flags)
+{
+ struct dummy_ep *ep;
+ struct dummy_request *req;
+
+ if (!_ep)
+ return NULL;
+ ep = usb_ep_to_dummy_ep (_ep);
+
+ req = kmalloc (sizeof *req, mem_flags);
+ if (!req)
+ return NULL;
+ memset (req, 0, sizeof *req);
+ INIT_LIST_HEAD (&req->queue);
+ return &req->req;
+}
+
+static void
+dummy_free_request (struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct dummy_ep *ep;
+ struct dummy_request *req;
+
+ ep = usb_ep_to_dummy_ep (_ep);
+ if (!ep || !_req || (!ep->desc && _ep->name != ep0name))
+ return;
+
+ req = usb_request_to_dummy_request (_req);
+ WARN_ON (!list_empty (&req->queue));
+ kfree (req);
+}
+
+static void *
+dummy_alloc_buffer (
+ struct usb_ep *_ep,
+ unsigned bytes,
+ dma_addr_t *dma,
+ int mem_flags
+) {
+ char *retval;
+ struct dummy_ep *ep;
+ struct dummy *dum;
+
+ ep = usb_ep_to_dummy_ep (_ep);
+ dum = ep_to_dummy (ep);
+
+ if (!dum->driver)
+ return NULL;
+ retval = kmalloc (bytes, mem_flags);
+ *dma = (dma_addr_t) retval;
+ return retval;
+}
+
+static void
+dummy_free_buffer (
+ struct usb_ep *_ep,
+ void *buf,
+ dma_addr_t dma,
+ unsigned bytes
+) {
+ if (bytes)
+ kfree (buf);
+}
+
+static void
+fifo_complete (struct usb_ep *ep, struct usb_request *req)
+{
+}
+
+static int
+dummy_queue (struct usb_ep *_ep, struct usb_request *_req, int mem_flags)
+{
+ struct dummy_ep *ep;
+ struct dummy_request *req;
+ struct dummy *dum;
+ unsigned long flags;
+
+ req = usb_request_to_dummy_request (_req);
+ if (!_req || !list_empty (&req->queue) || !_req->complete)
+ return -EINVAL;
+
+ ep = usb_ep_to_dummy_ep (_ep);
+ if (!_ep || (!ep->desc && _ep->name != ep0name))
+ return -EINVAL;
+
+ dum = ep_to_dummy (ep);
+ if (!dum->driver || !is_enabled (dum))
+ return -ESHUTDOWN;
+
+#if 0
+ dev_dbg (dummy_dev(dum), "ep %p queue req %p to %s, len %d buf %p\n",
+ ep, _req, _ep->name, _req->length, _req->buf);
+#endif
+
+ _req->status = -EINPROGRESS;
+ _req->actual = 0;
+ spin_lock_irqsave (&dum->lock, flags);
+
+ /* implement an emulated single-request FIFO */
+ if (ep->desc && (ep->desc->bEndpointAddress & USB_DIR_IN) &&
+ list_empty (&dum->fifo_req.queue) &&
+ list_empty (&ep->queue) &&
+ _req->length <= FIFO_SIZE) {
+ req = &dum->fifo_req;
+ req->req = *_req;
+ req->req.buf = dum->fifo_buf;
+ memcpy (dum->fifo_buf, _req->buf, _req->length);
+ req->req.context = dum;
+ req->req.complete = fifo_complete;
+
+ spin_unlock (&dum->lock);
+ _req->actual = _req->length;
+ _req->status = 0;
+ _req->complete (_ep, _req);
+ spin_lock (&dum->lock);
+ }
+ list_add_tail (&req->queue, &ep->queue);
+ spin_unlock_irqrestore (&dum->lock, flags);
+
+ /* real hardware would likely enable transfers here, in case
+ * it'd been left NAKing.
+ */
+ return 0;
+}
+
+static int dummy_dequeue (struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct dummy_ep *ep;
+ struct dummy *dum;
+ int retval = -EINVAL;
+ unsigned long flags;
+ struct dummy_request *req = NULL;
+
+ if (!_ep || !_req)
+ return retval;
+ ep = usb_ep_to_dummy_ep (_ep);
+ dum = ep_to_dummy (ep);
+
+ if (!dum->driver)
+ return -ESHUTDOWN;
+
+ spin_lock_irqsave (&dum->lock, flags);
+ list_for_each_entry (req, &ep->queue, queue) {
+ if (&req->req == _req) {
+ list_del_init (&req->queue);
+ _req->status = -ECONNRESET;
+ retval = 0;
+ break;
+ }
+ }
+ spin_unlock_irqrestore (&dum->lock, flags);
+
+ if (retval == 0) {
+ dev_dbg (dummy_dev(dum),
+ "dequeued req %p from %s, len %d buf %p\n",
+ req, _ep->name, _req->length, _req->buf);
+ _req->complete (_ep, _req);
+ }
+ return retval;
+}
+
+static int
+dummy_set_halt (struct usb_ep *_ep, int value)
+{
+ struct dummy_ep *ep;
+ struct dummy *dum;
+
+ if (!_ep)
+ return -EINVAL;
+ ep = usb_ep_to_dummy_ep (_ep);
+ dum = ep_to_dummy (ep);
+ if (!dum->driver)
+ return -ESHUTDOWN;
+ if (!value)
+ ep->halted = 0;
+ else if (ep->desc && (ep->desc->bEndpointAddress & USB_DIR_IN) &&
+ !list_empty (&ep->queue))
+ return -EAGAIN;
+ else
+ ep->halted = 1;
+ /* FIXME clear emulated data toggle too */
+ return 0;
+}
+
+static const struct usb_ep_ops dummy_ep_ops = {
+ .enable = dummy_enable,
+ .disable = dummy_disable,
+
+ .alloc_request = dummy_alloc_request,
+ .free_request = dummy_free_request,
+
+ .alloc_buffer = dummy_alloc_buffer,
+ .free_buffer = dummy_free_buffer,
+ /* map, unmap, ... eventually hook the "generic" dma calls */
+
+ .queue = dummy_queue,
+ .dequeue = dummy_dequeue,
+
+ .set_halt = dummy_set_halt,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* there are both host and device side versions of this call ... */
+static int dummy_g_get_frame (struct usb_gadget *_gadget)
+{
+ struct timeval tv;
+
+ do_gettimeofday (&tv);
+ return tv.tv_usec / 1000;
+}
+
+static int dummy_wakeup (struct usb_gadget *_gadget)
+{
+ struct dummy *dum;
+
+ dum = gadget_to_dummy (_gadget);
+ if ((dum->devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) == 0
+ || !(dum->port_status & (1 << USB_PORT_FEAT_SUSPEND)))
+ return -EINVAL;
+
+ /* hub notices our request, issues downstream resume, etc */
+ dum->resuming = 1;
+ dum->port_status |= (1 << USB_PORT_FEAT_C_SUSPEND);
+ return 0;
+}
+
+static int dummy_set_selfpowered (struct usb_gadget *_gadget, int value)
+{
+ struct dummy *dum;
+
+ dum = gadget_to_dummy (_gadget);
+ if (value)
+ dum->devstatus |= (1 << USB_DEVICE_SELF_POWERED);
+ else
+ dum->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED);
+ return 0;
+}
+
+static const struct usb_gadget_ops dummy_ops = {
+ .get_frame = dummy_g_get_frame,
+ .wakeup = dummy_wakeup,
+ .set_selfpowered = dummy_set_selfpowered,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* "function" sysfs attribute */
+static ssize_t
+show_function (struct device *dev, char *buf)
+{
+ struct dummy *dum = gadget_dev_to_dummy (dev);
+
+ if (!dum->driver || !dum->driver->function)
+ return 0;
+ return scnprintf (buf, PAGE_SIZE, "%s\n", dum->driver->function);
+}
+DEVICE_ATTR (function, S_IRUGO, show_function, NULL);
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Driver registration/unregistration.
+ *
+ * This is basically hardware-specific; there's usually only one real USB
+ * device (not host) controller since that's how USB devices are intended
+ * to work. So most implementations of these api calls will rely on the
+ * fact that only one driver will ever bind to the hardware. But curious
+ * hardware can be built with discrete components, so the gadget API doesn't
+ * require that assumption.
+ *
+ * For this emulator, it might be convenient to create a usb slave device
+ * for each driver that registers: just add to a big root hub.
+ */
+
+static void
+dummy_udc_release (struct device *dev)
+{
+}
+
+static void
+dummy_pdev_release (struct device *dev)
+{
+}
+
+static int
+dummy_register_udc (struct dummy *dum)
+{
+ int rc;
+
+ strcpy (dum->gadget.dev.bus_id, "udc");
+ dum->gadget.dev.parent = dummy_dev(dum);
+ dum->gadget.dev.release = dummy_udc_release;
+
+ rc = device_register (&dum->gadget.dev);
+ if (rc == 0)
+ device_create_file (&dum->gadget.dev, &dev_attr_function);
+ return rc;
+}
+
+static void
+dummy_unregister_udc (struct dummy *dum)
+{
+ device_remove_file (&dum->gadget.dev, &dev_attr_function);
+ device_unregister (&dum->gadget.dev);
+}
+
+int
+usb_gadget_register_driver (struct usb_gadget_driver *driver)
+{
+ struct dummy *dum = the_controller;
+ int retval, i;
+
+ if (!dum)
+ return -EINVAL;
+ if (dum->driver)
+ return -EBUSY;
+ if (!driver->bind || !driver->unbind || !driver->setup
+ || driver->speed == USB_SPEED_UNKNOWN)
+ return -EINVAL;
+
+ /*
+ * SLAVE side init ... the layer above hardware, which
+ * can't enumerate without help from the driver we're binding.
+ */
+ dum->gadget.name = gadget_name;
+ dum->gadget.ops = &dummy_ops;
+ dum->gadget.is_dualspeed = 1;
+
+ dum->devstatus = 0;
+ dum->resuming = 0;
+
+ INIT_LIST_HEAD (&dum->gadget.ep_list);
+ for (i = 0; i < DUMMY_ENDPOINTS; i++) {
+ struct dummy_ep *ep = &dum->ep [i];
+
+ if (!ep_name [i])
+ break;
+ ep->ep.name = ep_name [i];
+ ep->ep.ops = &dummy_ep_ops;
+ list_add_tail (&ep->ep.ep_list, &dum->gadget.ep_list);
+ ep->halted = ep->already_seen = ep->setup_stage = 0;
+ ep->ep.maxpacket = ~0;
+ ep->last_io = jiffies;
+ ep->gadget = &dum->gadget;
+ ep->desc = NULL;
+ INIT_LIST_HEAD (&ep->queue);
+ }
+
+ dum->gadget.ep0 = &dum->ep [0].ep;
+ dum->ep [0].ep.maxpacket = 64;
+ list_del_init (&dum->ep [0].ep.ep_list);
+ INIT_LIST_HEAD(&dum->fifo_req.queue);
+
+ dum->driver = driver;
+ dum->gadget.dev.driver = &driver->driver;
+ dev_dbg (dummy_dev(dum), "binding gadget driver '%s'\n",
+ driver->driver.name);
+ if ((retval = driver->bind (&dum->gadget)) != 0) {
+ dum->driver = NULL;
+ dum->gadget.dev.driver = NULL;
+ return retval;
+ }
+
+ // FIXME: Check these calls for errors and re-order
+ driver->driver.bus = dum->gadget.dev.parent->bus;
+ driver_register (&driver->driver);
+
+ device_bind_driver (&dum->gadget.dev);
+
+ /* khubd will enumerate this in a while */
+ dum->port_status |= USB_PORT_STAT_CONNECTION
+ | (1 << USB_PORT_FEAT_C_CONNECTION);
+ return 0;
+}
+EXPORT_SYMBOL (usb_gadget_register_driver);
+
+/* caller must hold lock */
+static void
+stop_activity (struct dummy *dum, struct usb_gadget_driver *driver)
+{
+ struct dummy_ep *ep;
+
+ /* prevent any more requests */
+ dum->address = 0;
+
+ /* The timer is left running so that outstanding URBs can fail */
+
+ /* nuke any pending requests first, so driver i/o is quiesced */
+ list_for_each_entry (ep, &dum->gadget.ep_list, ep.ep_list)
+ nuke (dum, ep);
+
+ /* driver now does any non-usb quiescing necessary */
+ if (driver) {
+ spin_unlock (&dum->lock);
+ driver->disconnect (&dum->gadget);
+ spin_lock (&dum->lock);
+ }
+}
+
+int
+usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
+{
+ struct dummy *dum = the_controller;
+ unsigned long flags;
+
+ if (!dum)
+ return -ENODEV;
+ if (!driver || driver != dum->driver)
+ return -EINVAL;
+
+ dev_dbg (dummy_dev(dum), "unregister gadget driver '%s'\n",
+ driver->driver.name);
+
+ spin_lock_irqsave (&dum->lock, flags);
+ stop_activity (dum, driver);
+ dum->port_status &= ~(USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE |
+ USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED);
+ dum->port_status |= (1 << USB_PORT_FEAT_C_CONNECTION);
+ spin_unlock_irqrestore (&dum->lock, flags);
+
+ driver->unbind (&dum->gadget);
+ dum->driver = NULL;
+
+ device_release_driver (&dum->gadget.dev);
+
+ driver_unregister (&driver->driver);
+
+ return 0;
+}
+EXPORT_SYMBOL (usb_gadget_unregister_driver);
+
+#undef is_enabled
+
+int net2280_set_fifo_mode (struct usb_gadget *gadget, int mode)
+{
+ return -ENOSYS;
+}
+EXPORT_SYMBOL (net2280_set_fifo_mode);
+
+/*-------------------------------------------------------------------------*/
+
+/* MASTER/HOST SIDE DRIVER
+ *
+ * this uses the hcd framework to hook up to host side drivers.
+ * its root hub will only have one device, otherwise it acts like
+ * a normal host controller.
+ *
+ * when urbs are queued, they're just stuck on a list that we
+ * scan in a timer callback. that callback connects writes from
+ * the host with reads from the device, and so on, based on the
+ * usb 2.0 rules.
+ */
+
+static int dummy_urb_enqueue (
+ struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep,
+ struct urb *urb,
+ int mem_flags
+) {
+ struct dummy *dum;
+ struct urbp *urbp;
+ unsigned long flags;
+
+ if (!urb->transfer_buffer && urb->transfer_buffer_length)
+ return -EINVAL;
+
+ urbp = kmalloc (sizeof *urbp, mem_flags);
+ if (!urbp)
+ return -ENOMEM;
+ urbp->urb = urb;
+
+ dum = hcd_to_dummy (hcd);
+ spin_lock_irqsave (&dum->lock, flags);
+
+ if (!dum->udev) {
+ dum->udev = urb->dev;
+ usb_get_dev (dum->udev);
+ } else if (unlikely (dum->udev != urb->dev))
+ dev_err (dummy_dev(dum), "usb_device address has changed!\n");
+
+ list_add_tail (&urbp->urbp_list, &dum->urbp_list);
+ urb->hcpriv = urbp;
+ if (usb_pipetype (urb->pipe) == PIPE_CONTROL)
+ urb->error_count = 1; /* mark as a new urb */
+
+ /* kick the scheduler, it'll do the rest */
+ if (!timer_pending (&dum->timer))
+ mod_timer (&dum->timer, jiffies + 1);
+
+ spin_unlock_irqrestore (&dum->lock, flags);
+ return 0;
+}
+
+static int dummy_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
+{
+ /* giveback happens automatically in timer callback */
+ return 0;
+}
+
+static void maybe_set_status (struct urb *urb, int status)
+{
+ spin_lock (&urb->lock);
+ if (urb->status == -EINPROGRESS)
+ urb->status = status;
+ spin_unlock (&urb->lock);
+}
+
+/* transfer up to a frame's worth; caller must own lock */
+static int
+transfer (struct dummy *dum, struct urb *urb, struct dummy_ep *ep, int limit)
+{
+ struct dummy_request *req;
+
+top:
+ /* if there's no request queued, the device is NAKing; return */
+ list_for_each_entry (req, &ep->queue, queue) {
+ unsigned host_len, dev_len, len;
+ int is_short, to_host;
+ int rescan = 0;
+
+ /* 1..N packets of ep->ep.maxpacket each ... the last one
+ * may be short (including zero length).
+ *
+ * writer can send a zlp explicitly (length 0) or implicitly
+ * (length mod maxpacket zero, and 'zero' flag); they always
+ * terminate reads.
+ */
+ host_len = urb->transfer_buffer_length - urb->actual_length;
+ dev_len = req->req.length - req->req.actual;
+ len = min (host_len, dev_len);
+
+ /* FIXME update emulated data toggle too */
+
+ to_host = usb_pipein (urb->pipe);
+ if (unlikely (len == 0))
+ is_short = 1;
+ else {
+ char *ubuf, *rbuf;
+
+ /* not enough bandwidth left? */
+ if (limit < ep->ep.maxpacket && limit < len)
+ break;
+ len = min (len, (unsigned) limit);
+ if (len == 0)
+ break;
+
+ /* use an extra pass for the final short packet */
+ if (len > ep->ep.maxpacket) {
+ rescan = 1;
+ len -= (len % ep->ep.maxpacket);
+ }
+ is_short = (len % ep->ep.maxpacket) != 0;
+
+ /* else transfer packet(s) */
+ ubuf = urb->transfer_buffer + urb->actual_length;
+ rbuf = req->req.buf + req->req.actual;
+ if (to_host)
+ memcpy (ubuf, rbuf, len);
+ else
+ memcpy (rbuf, ubuf, len);
+ ep->last_io = jiffies;
+
+ limit -= len;
+ urb->actual_length += len;
+ req->req.actual += len;
+ }
+
+ /* short packets terminate, maybe with overflow/underflow.
+ * it's only really an error to write too much.
+ *
+ * partially filling a buffer optionally blocks queue advances
+ * (so completion handlers can clean up the queue) but we don't
+ * need to emulate such data-in-flight. so we only show part
+ * of the URB_SHORT_NOT_OK effect: completion status.
+ */
+ if (is_short) {
+ if (host_len == dev_len) {
+ req->req.status = 0;
+ maybe_set_status (urb, 0);
+ } else if (to_host) {
+ req->req.status = 0;
+ if (dev_len > host_len)
+ maybe_set_status (urb, -EOVERFLOW);
+ else
+ maybe_set_status (urb,
+ (urb->transfer_flags
+ & URB_SHORT_NOT_OK)
+ ? -EREMOTEIO : 0);
+ } else if (!to_host) {
+ maybe_set_status (urb, 0);
+ if (host_len > dev_len)
+ req->req.status = -EOVERFLOW;
+ else
+ req->req.status = 0;
+ }
+
+ /* many requests terminate without a short packet */
+ } else {
+ if (req->req.length == req->req.actual
+ && !req->req.zero)
+ req->req.status = 0;
+ if (urb->transfer_buffer_length == urb->actual_length
+ && !(urb->transfer_flags
+ & URB_ZERO_PACKET)) {
+ maybe_set_status (urb, 0);
+ }
+ }
+
+ /* device side completion --> continuable */
+ if (req->req.status != -EINPROGRESS) {
+ list_del_init (&req->queue);
+
+ spin_unlock (&dum->lock);
+ req->req.complete (&ep->ep, &req->req);
+ spin_lock (&dum->lock);
+
+ /* requests might have been unlinked... */
+ rescan = 1;
+ }
+
+ /* host side completion --> terminate */
+ if (urb->status != -EINPROGRESS)
+ break;
+
+ /* rescan to continue with any other queued i/o */
+ if (rescan)
+ goto top;
+ }
+ return limit;
+}
+
+static int periodic_bytes (struct dummy *dum, struct dummy_ep *ep)
+{
+ int limit = ep->ep.maxpacket;
+
+ if (dum->gadget.speed == USB_SPEED_HIGH) {
+ int tmp;
+
+ /* high bandwidth mode */
+ tmp = le16_to_cpu(ep->desc->wMaxPacketSize);
+ tmp = le16_to_cpu (tmp);
+ tmp = (tmp >> 11) & 0x03;
+ tmp *= 8 /* applies to entire frame */;
+ limit += limit * tmp;
+ }
+ return limit;
+}
+
+#define is_active(dum) ((dum->port_status & \
+ (USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE | \
+ USB_PORT_STAT_SUSPEND)) \
+ == (USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE))
+
+static struct dummy_ep *find_endpoint (struct dummy *dum, u8 address)
+{
+ int i;
+
+ if (!is_active (dum))
+ return NULL;
+ if ((address & ~USB_DIR_IN) == 0)
+ return &dum->ep [0];
+ for (i = 1; i < DUMMY_ENDPOINTS; i++) {
+ struct dummy_ep *ep = &dum->ep [i];
+
+ if (!ep->desc)
+ continue;
+ if (ep->desc->bEndpointAddress == address)
+ return ep;
+ }
+ return NULL;
+}
+
+#undef is_active
+
+#define Dev_Request (USB_TYPE_STANDARD | USB_RECIP_DEVICE)
+#define Dev_InRequest (Dev_Request | USB_DIR_IN)
+#define Intf_Request (USB_TYPE_STANDARD | USB_RECIP_INTERFACE)
+#define Intf_InRequest (Intf_Request | USB_DIR_IN)
+#define Ep_Request (USB_TYPE_STANDARD | USB_RECIP_ENDPOINT)
+#define Ep_InRequest (Ep_Request | USB_DIR_IN)
+
+/* drive both sides of the transfers; looks like irq handlers to
+ * both drivers except the callbacks aren't in_irq().
+ */
+static void dummy_timer (unsigned long _dum)
+{
+ struct dummy *dum = (struct dummy *) _dum;
+ struct urbp *urbp, *tmp;
+ unsigned long flags;
+ int limit, total;
+ int i;
+
+ /* simplistic model for one frame's bandwidth */
+ switch (dum->gadget.speed) {
+ case USB_SPEED_LOW:
+ total = 8/*bytes*/ * 12/*packets*/;
+ break;
+ case USB_SPEED_FULL:
+ total = 64/*bytes*/ * 19/*packets*/;
+ break;
+ case USB_SPEED_HIGH:
+ total = 512/*bytes*/ * 13/*packets*/ * 8/*uframes*/;
+ break;
+ default:
+ dev_err (dummy_dev(dum), "bogus device speed\n");
+ return;
+ }
+
+ /* FIXME if HZ != 1000 this will probably misbehave ... */
+
+ /* look at each urb queued by the host side driver */
+ spin_lock_irqsave (&dum->lock, flags);
+
+ if (!dum->udev) {
+ dev_err (dummy_dev(dum),
+ "timer fired with no URBs pending?\n");
+ spin_unlock_irqrestore (&dum->lock, flags);
+ return;
+ }
+
+ for (i = 0; i < DUMMY_ENDPOINTS; i++) {
+ if (!ep_name [i])
+ break;
+ dum->ep [i].already_seen = 0;
+ }
+
+restart:
+ list_for_each_entry_safe (urbp, tmp, &dum->urbp_list, urbp_list) {
+ struct urb *urb;
+ struct dummy_request *req;
+ u8 address;
+ struct dummy_ep *ep = NULL;
+ int type;
+
+ urb = urbp->urb;
+ if (urb->status != -EINPROGRESS) {
+ /* likely it was just unlinked */
+ goto return_urb;
+ }
+ type = usb_pipetype (urb->pipe);
+
+ /* used up this frame's non-periodic bandwidth?
+ * FIXME there's infinite bandwidth for control and
+ * periodic transfers ... unrealistic.
+ */
+ if (total <= 0 && type == PIPE_BULK)
+ continue;
+
+ /* find the gadget's ep for this request (if configured) */
+ address = usb_pipeendpoint (urb->pipe);
+ if (usb_pipein (urb->pipe))
+ address |= USB_DIR_IN;
+ ep = find_endpoint(dum, address);
+ if (!ep) {
+ /* set_configuration() disagreement */
+ dev_dbg (dummy_dev(dum),
+ "no ep configured for urb %p\n",
+ urb);
+ maybe_set_status (urb, -EPROTO);
+ goto return_urb;
+ }
+
+ if (ep->already_seen)
+ continue;
+ ep->already_seen = 1;
+ if (ep == &dum->ep [0] && urb->error_count) {
+ ep->setup_stage = 1; /* a new urb */
+ urb->error_count = 0;
+ }
+ if (ep->halted && !ep->setup_stage) {
+ /* NOTE: must not be iso! */
+ dev_dbg (dummy_dev(dum), "ep %s halted, urb %p\n",
+ ep->ep.name, urb);
+ maybe_set_status (urb, -EPIPE);
+ goto return_urb;
+ }
+ /* FIXME make sure both ends agree on maxpacket */
+
+ /* handle control requests */
+ if (ep == &dum->ep [0] && ep->setup_stage) {
+ struct usb_ctrlrequest setup;
+ int value = 1;
+ struct dummy_ep *ep2;
+
+ setup = *(struct usb_ctrlrequest*) urb->setup_packet;
+ le16_to_cpus (&setup.wIndex);
+ le16_to_cpus (&setup.wValue);
+ le16_to_cpus (&setup.wLength);
+ if (setup.wLength != urb->transfer_buffer_length) {
+ maybe_set_status (urb, -EOVERFLOW);
+ goto return_urb;
+ }
+
+ /* paranoia, in case of stale queued data */
+ list_for_each_entry (req, &ep->queue, queue) {
+ list_del_init (&req->queue);
+ req->req.status = -EOVERFLOW;
+ dev_dbg (dummy_dev(dum), "stale req = %p\n",
+ req);
+
+ spin_unlock (&dum->lock);
+ req->req.complete (&ep->ep, &req->req);
+ spin_lock (&dum->lock);
+ ep->already_seen = 0;
+ goto restart;
+ }
+
+ /* gadget driver never sees set_address or operations
+ * on standard feature flags. some hardware doesn't
+ * even expose them.
+ */
+ ep->last_io = jiffies;
+ ep->setup_stage = 0;
+ ep->halted = 0;
+ switch (setup.bRequest) {
+ case USB_REQ_SET_ADDRESS:
+ if (setup.bRequestType != Dev_Request)
+ break;
+ dum->address = setup.wValue;
+ maybe_set_status (urb, 0);
+ dev_dbg (dummy_dev(dum), "set_address = %d\n",
+ setup.wValue);
+ value = 0;
+ break;
+ case USB_REQ_SET_FEATURE:
+ if (setup.bRequestType == Dev_Request) {
+ value = 0;
+ switch (setup.wValue) {
+ case USB_DEVICE_REMOTE_WAKEUP:
+ break;
+ default:
+ value = -EOPNOTSUPP;
+ }
+ if (value == 0) {
+ dum->devstatus |=
+ (1 << setup.wValue);
+ maybe_set_status (urb, 0);
+ }
+
+ } else if (setup.bRequestType == Ep_Request) {
+ // endpoint halt
+ ep2 = find_endpoint (dum,
+ setup.wIndex);
+ if (!ep2) {
+ value = -EOPNOTSUPP;
+ break;
+ }
+ ep2->halted = 1;
+ value = 0;
+ maybe_set_status (urb, 0);
+ }
+ break;
+ case USB_REQ_CLEAR_FEATURE:
+ if (setup.bRequestType == Dev_Request) {
+ switch (setup.wValue) {
+ case USB_DEVICE_REMOTE_WAKEUP:
+ dum->devstatus &= ~(1 <<
+ USB_DEVICE_REMOTE_WAKEUP);
+ value = 0;
+ maybe_set_status (urb, 0);
+ break;
+ default:
+ value = -EOPNOTSUPP;
+ break;
+ }
+ } else if (setup.bRequestType == Ep_Request) {
+ // endpoint halt
+ ep2 = find_endpoint (dum,
+ setup.wIndex);
+ if (!ep2) {
+ value = -EOPNOTSUPP;
+ break;
+ }
+ ep2->halted = 0;
+ value = 0;
+ maybe_set_status (urb, 0);
+ }
+ break;
+ case USB_REQ_GET_STATUS:
+ if (setup.bRequestType == Dev_InRequest
+ || setup.bRequestType
+ == Intf_InRequest
+ || setup.bRequestType
+ == Ep_InRequest
+ ) {
+ char *buf;
+
+ // device: remote wakeup, selfpowered
+ // interface: nothing
+ // endpoint: halt
+ buf = (char *)urb->transfer_buffer;
+ if (urb->transfer_buffer_length > 0) {
+ if (setup.bRequestType ==
+ Ep_InRequest) {
+ ep2 = find_endpoint (dum, setup.wIndex);
+ if (!ep2) {
+ value = -EOPNOTSUPP;
+ break;
+ }
+ buf [0] = ep2->halted;
+ } else if (setup.bRequestType ==
+ Dev_InRequest) {
+ buf [0] = (u8)
+ dum->devstatus;
+ } else
+ buf [0] = 0;
+ }
+ if (urb->transfer_buffer_length > 1)
+ buf [1] = 0;
+ urb->actual_length = min (2,
+ urb->transfer_buffer_length);
+ value = 0;
+ maybe_set_status (urb, 0);
+ }
+ break;
+ }
+
+ /* gadget driver handles all other requests. block
+ * until setup() returns; no reentrancy issues etc.
+ */
+ if (value > 0) {
+ spin_unlock (&dum->lock);
+ value = dum->driver->setup (&dum->gadget,
+ &setup);
+ spin_lock (&dum->lock);
+
+ if (value >= 0) {
+ /* no delays (max 64KB data stage) */
+ limit = 64*1024;
+ goto treat_control_like_bulk;
+ }
+ /* error, see below */
+ }
+
+ if (value < 0) {
+ if (value != -EOPNOTSUPP)
+ dev_dbg (dummy_dev(dum),
+ "setup --> %d\n",
+ value);
+ maybe_set_status (urb, -EPIPE);
+ urb->actual_length = 0;
+ }
+
+ goto return_urb;
+ }
+
+ /* non-control requests */
+ limit = total;
+ switch (usb_pipetype (urb->pipe)) {
+ case PIPE_ISOCHRONOUS:
+ /* FIXME is it urb->interval since the last xfer?
+ * use urb->iso_frame_desc[i].
+ * complete whether or not ep has requests queued.
+ * report random errors, to debug drivers.
+ */
+ limit = max (limit, periodic_bytes (dum, ep));
+ maybe_set_status (urb, -ENOSYS);
+ break;
+
+ case PIPE_INTERRUPT:
+ /* FIXME is it urb->interval since the last xfer?
+ * this almost certainly polls too fast.
+ */
+ limit = max (limit, periodic_bytes (dum, ep));
+ /* FALLTHROUGH */
+
+ // case PIPE_BULK: case PIPE_CONTROL:
+ default:
+ treat_control_like_bulk:
+ ep->last_io = jiffies;
+ total = transfer (dum, urb, ep, limit);
+ break;
+ }
+
+ /* incomplete transfer? */
+ if (urb->status == -EINPROGRESS)
+ continue;
+
+return_urb:
+ urb->hcpriv = NULL;
+ list_del (&urbp->urbp_list);
+ kfree (urbp);
+ if (ep)
+ ep->already_seen = ep->setup_stage = 0;
+
+ spin_unlock (&dum->lock);
+ usb_hcd_giveback_urb (dummy_to_hcd(dum), urb, NULL);
+ spin_lock (&dum->lock);
+
+ goto restart;
+ }
+
+ /* want a 1 msec delay here */
+ if (!list_empty (&dum->urbp_list))
+ mod_timer (&dum->timer, jiffies + msecs_to_jiffies(1));
+ else {
+ usb_put_dev (dum->udev);
+ dum->udev = NULL;
+ }
+
+ spin_unlock_irqrestore (&dum->lock, flags);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#define PORT_C_MASK \
+ ((1 << USB_PORT_FEAT_C_CONNECTION) \
+ | (1 << USB_PORT_FEAT_C_ENABLE) \
+ | (1 << USB_PORT_FEAT_C_SUSPEND) \
+ | (1 << USB_PORT_FEAT_C_OVER_CURRENT) \
+ | (1 << USB_PORT_FEAT_C_RESET))
+
+static int dummy_hub_status (struct usb_hcd *hcd, char *buf)
+{
+ struct dummy *dum;
+ unsigned long flags;
+ int retval;
+
+ dum = hcd_to_dummy (hcd);
+
+ spin_lock_irqsave (&dum->lock, flags);
+ if (!(dum->port_status & PORT_C_MASK))
+ retval = 0;
+ else {
+ *buf = (1 << 1);
+ dev_dbg (dummy_dev(dum), "port status 0x%08x has changes\n",
+ dum->port_status);
+ retval = 1;
+ }
+ spin_unlock_irqrestore (&dum->lock, flags);
+ return retval;
+}
+
+static inline void
+hub_descriptor (struct usb_hub_descriptor *desc)
+{
+ memset (desc, 0, sizeof *desc);
+ desc->bDescriptorType = 0x29;
+ desc->bDescLength = 9;
+ desc->wHubCharacteristics = __constant_cpu_to_le16 (0x0001);
+ desc->bNbrPorts = 1;
+ desc->bitmap [0] = 0xff;
+ desc->bitmap [1] = 0xff;
+}
+
+static int dummy_hub_control (
+ struct usb_hcd *hcd,
+ u16 typeReq,
+ u16 wValue,
+ u16 wIndex,
+ char *buf,
+ u16 wLength
+) {
+ struct dummy *dum;
+ int retval = 0;
+ unsigned long flags;
+
+ dum = hcd_to_dummy (hcd);
+ spin_lock_irqsave (&dum->lock, flags);
+ switch (typeReq) {
+ case ClearHubFeature:
+ break;
+ case ClearPortFeature:
+ switch (wValue) {
+ case USB_PORT_FEAT_SUSPEND:
+ if (dum->port_status & (1 << USB_PORT_FEAT_SUSPEND)) {
+ /* 20msec resume signaling */
+ dum->resuming = 1;
+ dum->re_timeout = jiffies +
+ msecs_to_jiffies(20);
+ }
+ break;
+ case USB_PORT_FEAT_POWER:
+ dum->port_status = 0;
+ dum->resuming = 0;
+ stop_activity(dum, dum->driver);
+ break;
+ default:
+ dum->port_status &= ~(1 << wValue);
+ }
+ break;
+ case GetHubDescriptor:
+ hub_descriptor ((struct usb_hub_descriptor *) buf);
+ break;
+ case GetHubStatus:
+ *(u32 *) buf = __constant_cpu_to_le32 (0);
+ break;
+ case GetPortStatus:
+ if (wIndex != 1)
+ retval = -EPIPE;
+
+ /* whoever resets or resumes must GetPortStatus to
+ * complete it!!
+ */
+ if (dum->resuming && time_after (jiffies, dum->re_timeout)) {
+ dum->port_status |= (1 << USB_PORT_FEAT_C_SUSPEND);
+ dum->port_status &= ~(1 << USB_PORT_FEAT_SUSPEND);
+ dum->resuming = 0;
+ dum->re_timeout = 0;
+ if (dum->driver && dum->driver->resume) {
+ spin_unlock (&dum->lock);
+ dum->driver->resume (&dum->gadget);
+ spin_lock (&dum->lock);
+ }
+ }
+ if ((dum->port_status & (1 << USB_PORT_FEAT_RESET)) != 0
+ && time_after (jiffies, dum->re_timeout)) {
+ dum->port_status |= (1 << USB_PORT_FEAT_C_RESET);
+ dum->port_status &= ~(1 << USB_PORT_FEAT_RESET);
+ dum->re_timeout = 0;
+ if (dum->driver) {
+ dum->port_status |= USB_PORT_STAT_ENABLE;
+ /* give it the best speed we agree on */
+ dum->gadget.speed = dum->driver->speed;
+ dum->gadget.ep0->maxpacket = 64;
+ switch (dum->gadget.speed) {
+ case USB_SPEED_HIGH:
+ dum->port_status |=
+ USB_PORT_STAT_HIGH_SPEED;
+ break;
+ case USB_SPEED_LOW:
+ dum->gadget.ep0->maxpacket = 8;
+ dum->port_status |=
+ USB_PORT_STAT_LOW_SPEED;
+ break;
+ default:
+ dum->gadget.speed = USB_SPEED_FULL;
+ break;
+ }
+ }
+ }
+ ((u16 *) buf)[0] = cpu_to_le16 (dum->port_status);
+ ((u16 *) buf)[1] = cpu_to_le16 (dum->port_status >> 16);
+ break;
+ case SetHubFeature:
+ retval = -EPIPE;
+ break;
+ case SetPortFeature:
+ switch (wValue) {
+ case USB_PORT_FEAT_SUSPEND:
+ if ((dum->port_status & (1 << USB_PORT_FEAT_SUSPEND))
+ == 0) {
+ dum->port_status |=
+ (1 << USB_PORT_FEAT_SUSPEND);
+ if (dum->driver && dum->driver->suspend) {
+ spin_unlock (&dum->lock);
+ dum->driver->suspend (&dum->gadget);
+ spin_lock (&dum->lock);
+ }
+ }
+ break;
+ case USB_PORT_FEAT_RESET:
+ /* if it's already running, disconnect first */
+ if (dum->port_status & USB_PORT_STAT_ENABLE) {
+ dum->port_status &= ~(USB_PORT_STAT_ENABLE
+ | USB_PORT_STAT_LOW_SPEED
+ | USB_PORT_STAT_HIGH_SPEED);
+ if (dum->driver) {
+ dev_dbg (dummy_dev(dum),
+ "disconnect\n");
+ stop_activity (dum, dum->driver);
+ }
+
+ /* FIXME test that code path! */
+ }
+ /* 50msec reset signaling */
+ dum->re_timeout = jiffies + msecs_to_jiffies(50);
+ /* FALLTHROUGH */
+ default:
+ dum->port_status |= (1 << wValue);
+ }
+ break;
+
+ default:
+ dev_dbg (dummy_dev(dum),
+ "hub control req%04x v%04x i%04x l%d\n",
+ typeReq, wValue, wIndex, wLength);
+
+ /* "protocol stall" on error */
+ retval = -EPIPE;
+ }
+ spin_unlock_irqrestore (&dum->lock, flags);
+ return retval;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static inline ssize_t
+show_urb (char *buf, size_t size, struct urb *urb)
+{
+ int ep = usb_pipeendpoint (urb->pipe);
+
+ return snprintf (buf, size,
+ "urb/%p %s ep%d%s%s len %d/%d\n",
+ urb,
+ ({ char *s;
+ switch (urb->dev->speed) {
+ case USB_SPEED_LOW: s = "ls"; break;
+ case USB_SPEED_FULL: s = "fs"; break;
+ case USB_SPEED_HIGH: s = "hs"; break;
+ default: s = "?"; break;
+ }; s; }),
+ ep, ep ? (usb_pipein (urb->pipe) ? "in" : "out") : "",
+ ({ char *s; \
+ switch (usb_pipetype (urb->pipe)) { \
+ case PIPE_CONTROL: s = ""; break; \
+ case PIPE_BULK: s = "-bulk"; break; \
+ case PIPE_INTERRUPT: s = "-int"; break; \
+ default: s = "-iso"; break; \
+ }; s;}),
+ urb->actual_length, urb->transfer_buffer_length);
+}
+
+static ssize_t
+show_urbs (struct device *dev, char *buf)
+{
+ struct usb_hcd *hcd = dev_get_drvdata (dev);
+ struct dummy *dum = hcd_to_dummy (hcd);
+ struct urbp *urbp;
+ size_t size = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave (&dum->lock, flags);
+ list_for_each_entry (urbp, &dum->urbp_list, urbp_list) {
+ size_t temp;
+
+ temp = show_urb (buf, PAGE_SIZE - size, urbp->urb);
+ buf += temp;
+ size += temp;
+ }
+ spin_unlock_irqrestore (&dum->lock, flags);
+
+ return size;
+}
+static DEVICE_ATTR (urbs, S_IRUGO, show_urbs, NULL);
+
+static int dummy_start (struct usb_hcd *hcd)
+{
+ struct dummy *dum;
+ struct usb_device *root;
+ int retval;
+
+ dum = hcd_to_dummy (hcd);
+
+ /*
+ * MASTER side init ... we emulate a root hub that'll only ever
+ * talk to one device (the slave side). Also appears in sysfs,
+ * just like more familiar pci-based HCDs.
+ */
+ spin_lock_init (&dum->lock);
+ init_timer (&dum->timer);
+ dum->timer.function = dummy_timer;
+ dum->timer.data = (unsigned long) dum;
+
+ INIT_LIST_HEAD (&dum->urbp_list);
+
+ root = usb_alloc_dev (NULL, &hcd->self, 0);
+ if (!root)
+ return -ENOMEM;
+
+ /* root hub enters addressed state... */
+ hcd->state = HC_STATE_RUNNING;
+ root->speed = USB_SPEED_HIGH;
+
+ /* ...then configured, so khubd sees us. */
+ if ((retval = usb_hcd_register_root_hub (root, hcd)) != 0) {
+ goto err1;
+ }
+
+ /* only show a low-power port: just 8mA */
+ hub_set_power_budget (root, 8);
+
+ if ((retval = dummy_register_udc (dum)) != 0)
+ goto err2;
+
+ /* FIXME 'urbs' should be a per-device thing, maybe in usbcore */
+ device_create_file (dummy_dev(dum), &dev_attr_urbs);
+ return 0;
+
+ err2:
+ usb_disconnect (&hcd->self.root_hub);
+ err1:
+ usb_put_dev (root);
+ hcd->state = HC_STATE_QUIESCING;
+ return retval;
+}
+
+static void dummy_stop (struct usb_hcd *hcd)
+{
+ struct dummy *dum;
+
+ dum = hcd_to_dummy (hcd);
+
+ device_remove_file (dummy_dev(dum), &dev_attr_urbs);
+
+ usb_gadget_unregister_driver (dum->driver);
+ dummy_unregister_udc (dum);
+
+ dev_info (dummy_dev(dum), "stopped\n");
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int dummy_h_get_frame (struct usb_hcd *hcd)
+{
+ return dummy_g_get_frame (NULL);
+}
+
+static const struct hc_driver dummy_hcd = {
+ .description = (char *) driver_name,
+ .product_desc = "Dummy host controller",
+ .hcd_priv_size = sizeof(struct dummy),
+
+ .flags = HCD_USB2,
+
+ .start = dummy_start,
+ .stop = dummy_stop,
+
+ .urb_enqueue = dummy_urb_enqueue,
+ .urb_dequeue = dummy_urb_dequeue,
+
+ .get_frame_number = dummy_h_get_frame,
+
+ .hub_status_data = dummy_hub_status,
+ .hub_control = dummy_hub_control,
+};
+
+static int dummy_probe (struct device *dev)
+{
+ struct usb_hcd *hcd;
+ int retval;
+
+ dev_info (dev, "%s, driver " DRIVER_VERSION "\n", driver_desc);
+
+ hcd = usb_create_hcd (&dummy_hcd, dev, dev->bus_id);
+ if (!hcd)
+ return -ENOMEM;
+ the_controller = hcd_to_dummy (hcd);
+
+ retval = usb_add_hcd(hcd, 0, 0);
+ if (retval != 0) {
+ usb_put_hcd (hcd);
+ the_controller = NULL;
+ }
+ return retval;
+}
+
+static void dummy_remove (struct device *dev)
+{
+ struct usb_hcd *hcd;
+
+ hcd = dev_get_drvdata (dev);
+ usb_remove_hcd (hcd);
+ usb_put_hcd (hcd);
+ the_controller = NULL;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int dummy_pdev_detect (void)
+{
+ int retval;
+
+ retval = driver_register (&dummy_driver);
+ if (retval < 0)
+ return retval;
+
+ the_pdev.name = "hc";
+ the_pdev.dev.driver = &dummy_driver;
+ the_pdev.dev.release = dummy_pdev_release;
+
+ retval = platform_device_register (&the_pdev);
+ if (retval < 0)
+ driver_unregister (&dummy_driver);
+ return retval;
+}
+
+static void dummy_pdev_remove (void)
+{
+ platform_device_unregister (&the_pdev);
+ driver_unregister (&dummy_driver);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int __init init (void)
+{
+ int retval;
+
+ if (usb_disabled ())
+ return -ENODEV;
+ if ((retval = dummy_pdev_detect ()) != 0)
+ return retval;
+ if ((retval = dummy_probe (&the_pdev.dev)) != 0)
+ dummy_pdev_remove ();
+ return retval;
+}
+module_init (init);
+
+static void __exit cleanup (void)
+{
+ dummy_remove (&the_pdev.dev);
+ dummy_pdev_remove ();
+}
+module_exit (cleanup);
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
new file mode 100644
index 00000000000..f7c6d758e1b
--- /dev/null
+++ b/drivers/usb/gadget/epautoconf.c
@@ -0,0 +1,310 @@
+/*
+ * epautoconf.c -- endpoint autoconfiguration for usb gadget drivers
+ *
+ * Copyright (C) 2004 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/device.h>
+
+#include <linux/ctype.h>
+#include <linux/string.h>
+
+#include <linux/usb_ch9.h>
+#include <linux/usb_gadget.h>
+
+#include "gadget_chips.h"
+
+
+/* we must assign addresses for configurable endpoints (like net2280) */
+static __initdata unsigned epnum;
+
+// #define MANY_ENDPOINTS
+#ifdef MANY_ENDPOINTS
+/* more than 15 configurable endpoints */
+static __initdata unsigned in_epnum;
+#endif
+
+
+/*
+ * This should work with endpoints from controller drivers sharing the
+ * same endpoint naming convention. By example:
+ *
+ * - ep1, ep2, ... address is fixed, not direction or type
+ * - ep1in, ep2out, ... address and direction are fixed, not type
+ * - ep1-bulk, ep2-bulk, ... address and type are fixed, not direction
+ * - ep1in-bulk, ep2out-iso, ... all three are fixed
+ * - ep-* ... no functionality restrictions
+ *
+ * Type suffixes are "-bulk", "-iso", or "-int". Numbers are decimal.
+ * Less common restrictions are implied by gadget_is_*().
+ *
+ * NOTE: each endpoint is unidirectional, as specified by its USB
+ * descriptor; and isn't specific to a configuration or altsetting.
+ */
+static int __init
+ep_matches (
+ struct usb_gadget *gadget,
+ struct usb_ep *ep,
+ struct usb_endpoint_descriptor *desc
+)
+{
+ u8 type;
+ const char *tmp;
+ u16 max;
+
+ /* endpoint already claimed? */
+ if (0 != ep->driver_data)
+ return 0;
+
+ /* only support ep0 for portable CONTROL traffic */
+ type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+ if (USB_ENDPOINT_XFER_CONTROL == type)
+ return 0;
+
+ /* some other naming convention */
+ if ('e' != ep->name[0])
+ return 0;
+
+ /* type-restriction: "-iso", "-bulk", or "-int".
+ * direction-restriction: "in", "out".
+ */
+ if ('-' != ep->name[2]) {
+ tmp = strrchr (ep->name, '-');
+ if (tmp) {
+ switch (type) {
+ case USB_ENDPOINT_XFER_INT:
+ /* bulk endpoints handle interrupt transfers,
+ * except the toggle-quirky iso-synch kind
+ */
+ if ('s' == tmp[2]) // == "-iso"
+ return 0;
+ /* for now, avoid PXA "interrupt-in";
+ * it's documented as never using DATA1.
+ */
+ if (gadget_is_pxa (gadget)
+ && 'i' == tmp [1])
+ return 0;
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ if ('b' != tmp[1]) // != "-bulk"
+ return 0;
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ if ('s' != tmp[2]) // != "-iso"
+ return 0;
+ }
+ } else {
+ tmp = ep->name + strlen (ep->name);
+ }
+
+ /* direction-restriction: "..in-..", "out-.." */
+ tmp--;
+ if (!isdigit (*tmp)) {
+ if (desc->bEndpointAddress & USB_DIR_IN) {
+ if ('n' != *tmp)
+ return 0;
+ } else {
+ if ('t' != *tmp)
+ return 0;
+ }
+ }
+ }
+
+ /* endpoint maxpacket size is an input parameter, except for bulk
+ * where it's an output parameter representing the full speed limit.
+ * the usb spec fixes high speed bulk maxpacket at 512 bytes.
+ */
+ max = 0x7ff & le16_to_cpup (&desc->wMaxPacketSize);
+ switch (type) {
+ case USB_ENDPOINT_XFER_INT:
+ /* INT: limit 64 bytes full speed, 1024 high speed */
+ if (!gadget->is_dualspeed && max > 64)
+ return 0;
+ /* FALLTHROUGH */
+
+ case USB_ENDPOINT_XFER_ISOC:
+ /* ISO: limit 1023 bytes full speed, 1024 high speed */
+ if (ep->maxpacket < max)
+ return 0;
+ if (!gadget->is_dualspeed && max > 1023)
+ return 0;
+
+ /* BOTH: "high bandwidth" works only at high speed */
+ if ((desc->wMaxPacketSize & __constant_cpu_to_le16(3<<11))) {
+ if (!gadget->is_dualspeed)
+ return 0;
+ /* configure your hardware with enough buffering!! */
+ }
+ break;
+ }
+
+ /* MATCH!! */
+
+ /* report address */
+ if (isdigit (ep->name [2])) {
+ u8 num = simple_strtol (&ep->name [2], NULL, 10);
+ desc->bEndpointAddress |= num;
+#ifdef MANY_ENDPOINTS
+ } else if (desc->bEndpointAddress & USB_DIR_IN) {
+ if (++in_epnum > 15)
+ return 0;
+ desc->bEndpointAddress = USB_DIR_IN | in_epnum;
+#endif
+ } else {
+ if (++epnum > 15)
+ return 0;
+ desc->bEndpointAddress |= epnum;
+ }
+
+ /* report (variable) full speed bulk maxpacket */
+ if (USB_ENDPOINT_XFER_BULK == type) {
+ int size = ep->maxpacket;
+
+ /* min() doesn't work on bitfields with gcc-3.5 */
+ if (size > 64)
+ size = 64;
+ desc->wMaxPacketSize = cpu_to_le16(size);
+ }
+ return 1;
+}
+
+static struct usb_ep * __init
+find_ep (struct usb_gadget *gadget, const char *name)
+{
+ struct usb_ep *ep;
+
+ list_for_each_entry (ep, &gadget->ep_list, ep_list) {
+ if (0 == strcmp (ep->name, name))
+ return ep;
+ }
+ return NULL;
+}
+
+/**
+ * usb_ep_autoconfig - choose an endpoint matching the descriptor
+ * @gadget: The device to which the endpoint must belong.
+ * @desc: Endpoint descriptor, with endpoint direction and transfer mode
+ * initialized. For periodic transfers, the maximum packet
+ * size must also be initialized. This is modified on success.
+ *
+ * By choosing an endpoint to use with the specified descriptor, this
+ * routine simplifies writing gadget drivers that work with multiple
+ * USB device controllers. The endpoint would be passed later to
+ * usb_ep_enable(), along with some descriptor.
+ *
+ * That second descriptor won't always be the same as the first one.
+ * For example, isochronous endpoints can be autoconfigured for high
+ * bandwidth, and then used in several lower bandwidth altsettings.
+ * Also, high and full speed descriptors will be different.
+ *
+ * Be sure to examine and test the results of autoconfiguration on your
+ * hardware. This code may not make the best choices about how to use the
+ * USB controller, and it can't know all the restrictions that may apply.
+ * Some combinations of driver and hardware won't be able to autoconfigure.
+ *
+ * On success, this returns an un-claimed usb_ep, and modifies the endpoint
+ * descriptor bEndpointAddress. For bulk endpoints, the wMaxPacket value
+ * is initialized as if the endpoint were used at full speed. To prevent
+ * the endpoint from being returned by a later autoconfig call, claim it
+ * by assigning ep->driver_data to some non-null value.
+ *
+ * On failure, this returns a null endpoint descriptor.
+ */
+struct usb_ep * __init usb_ep_autoconfig (
+ struct usb_gadget *gadget,
+ struct usb_endpoint_descriptor *desc
+)
+{
+ struct usb_ep *ep;
+ u8 type;
+
+ type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+ /* First, apply chip-specific "best usage" knowledge.
+ * This might make a good usb_gadget_ops hook ...
+ */
+ if (gadget_is_net2280 (gadget) && type == USB_ENDPOINT_XFER_INT) {
+ /* ep-e, ep-f are PIO with only 64 byte fifos */
+ ep = find_ep (gadget, "ep-e");
+ if (ep && ep_matches (gadget, ep, desc))
+ return ep;
+ ep = find_ep (gadget, "ep-f");
+ if (ep && ep_matches (gadget, ep, desc))
+ return ep;
+
+ } else if (gadget_is_goku (gadget)) {
+ if (USB_ENDPOINT_XFER_INT == type) {
+ /* single buffering is enough */
+ ep = find_ep (gadget, "ep3-bulk");
+ if (ep && ep_matches (gadget, ep, desc))
+ return ep;
+ } else if (USB_ENDPOINT_XFER_BULK == type
+ && (USB_DIR_IN & desc->bEndpointAddress)) {
+ /* DMA may be available */
+ ep = find_ep (gadget, "ep2-bulk");
+ if (ep && ep_matches (gadget, ep, desc))
+ return ep;
+ }
+
+ } else if (gadget_is_sh (gadget) && USB_ENDPOINT_XFER_INT == type) {
+ /* single buffering is enough; maybe 8 byte fifo is too */
+ ep = find_ep (gadget, "ep3in-bulk");
+ if (ep && ep_matches (gadget, ep, desc))
+ return ep;
+
+ } else if (gadget_is_mq11xx (gadget) && USB_ENDPOINT_XFER_INT == type) {
+ ep = find_ep (gadget, "ep1-bulk");
+ if (ep && ep_matches (gadget, ep, desc))
+ return ep;
+ }
+
+ /* Second, look at endpoints until an unclaimed one looks usable */
+ list_for_each_entry (ep, &gadget->ep_list, ep_list) {
+ if (ep_matches (gadget, ep, desc))
+ return ep;
+ }
+
+ /* Fail */
+ return NULL;
+}
+
+/**
+ * usb_ep_autoconfig_reset - reset endpoint autoconfig state
+ * @gadget: device for which autoconfig state will be reset
+ *
+ * Use this for devices where one configuration may need to assign
+ * endpoint resources very differently from the next one. It clears
+ * state such as ep->driver_data and the record of assigned endpoints
+ * used by usb_ep_autoconfig().
+ */
+void __init usb_ep_autoconfig_reset (struct usb_gadget *gadget)
+{
+ struct usb_ep *ep;
+
+ list_for_each_entry (ep, &gadget->ep_list, ep_list) {
+ ep->driver_data = NULL;
+ }
+#ifdef MANY_ENDPOINTS
+ in_epnum = 0;
+#endif
+ epnum = 0;
+}
+
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
new file mode 100644
index 00000000000..cff9fb0b73c
--- /dev/null
+++ b/drivers/usb/gadget/ether.c
@@ -0,0 +1,2660 @@
+/*
+ * ether.c -- Ethernet gadget driver, with CDC and non-CDC options
+ *
+ * Copyright (C) 2003-2005 David Brownell
+ * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+
+// #define DEBUG 1
+// #define VERBOSE
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/utsname.h>
+#include <linux/device.h>
+#include <linux/moduleparam.h>
+#include <linux/ctype.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <asm/unaligned.h>
+
+#include <linux/usb_ch9.h>
+#include <linux/usb_cdc.h>
+#include <linux/usb_gadget.h>
+
+#include <linux/random.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+
+#include "gadget_chips.h"
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Ethernet gadget driver -- with CDC and non-CDC options
+ * Builds on hardware support for a full duplex link.
+ *
+ * CDC Ethernet is the standard USB solution for sending Ethernet frames
+ * using USB. Real hardware tends to use the same framing protocol but look
+ * different for control features. This driver strongly prefers to use
+ * this USB-IF standard as its open-systems interoperability solution;
+ * most host side USB stacks (except from Microsoft) support it.
+ *
+ * There's some hardware that can't talk CDC. We make that hardware
+ * implement a "minimalist" vendor-agnostic CDC core: same framing, but
+ * link-level setup only requires activating the configuration.
+ * Linux supports it, but other host operating systems may not.
+ * (This is a subset of CDC Ethernet.)
+ *
+ * A third option is also in use. Rather than CDC Ethernet, or something
+ * simpler, Microsoft pushes their own approach: RNDIS. The published
+ * RNDIS specs are ambiguous and appear to be incomplete, and are also
+ * needlessly complex.
+ */
+
+#define DRIVER_DESC "Ethernet Gadget"
+#define DRIVER_VERSION "Equinox 2004"
+
+static const char shortname [] = "ether";
+static const char driver_desc [] = DRIVER_DESC;
+
+#define RX_EXTRA 20 /* guard against rx overflows */
+
+#ifdef CONFIG_USB_ETH_RNDIS
+#include "rndis.h"
+#else
+#define rndis_init() 0
+#define rndis_exit() do{}while(0)
+#endif
+
+/* CDC and RNDIS support the same host-chosen outgoing packet filters. */
+#define DEFAULT_FILTER (USB_CDC_PACKET_TYPE_BROADCAST \
+ |USB_CDC_PACKET_TYPE_DIRECTED)
+
+
+/*-------------------------------------------------------------------------*/
+
+struct eth_dev {
+ spinlock_t lock;
+ struct usb_gadget *gadget;
+ struct usb_request *req; /* for control responses */
+ struct usb_request *stat_req; /* for cdc & rndis status */
+
+ u8 config;
+ struct usb_ep *in_ep, *out_ep, *status_ep;
+ const struct usb_endpoint_descriptor
+ *in, *out, *status;
+ struct list_head tx_reqs, rx_reqs;
+
+ struct net_device *net;
+ struct net_device_stats stats;
+ atomic_t tx_qlen;
+
+ struct work_struct work;
+ unsigned zlp:1;
+ unsigned cdc:1;
+ unsigned rndis:1;
+ unsigned suspended:1;
+ u16 cdc_filter;
+ unsigned long todo;
+#define WORK_RX_MEMORY 0
+ int rndis_config;
+ u8 host_mac [ETH_ALEN];
+};
+
+/* This version autoconfigures as much as possible at run-time.
+ *
+ * It also ASSUMES a self-powered device, without remote wakeup,
+ * although remote wakeup support would make sense.
+ */
+static const char *EP_IN_NAME;
+static const char *EP_OUT_NAME;
+static const char *EP_STATUS_NAME;
+
+/*-------------------------------------------------------------------------*/
+
+/* DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
+ * Instead: allocate your own, using normal USB-IF procedures.
+ */
+
+/* Thanks to NetChip Technologies for donating this product ID.
+ * It's for devices with only CDC Ethernet configurations.
+ */
+#define CDC_VENDOR_NUM 0x0525 /* NetChip */
+#define CDC_PRODUCT_NUM 0xa4a1 /* Linux-USB Ethernet Gadget */
+
+/* For hardware that can't talk CDC, we use the same vendor ID that
+ * ARM Linux has used for ethernet-over-usb, both with sa1100 and
+ * with pxa250. We're protocol-compatible, if the host-side drivers
+ * use the endpoint descriptors. bcdDevice (version) is nonzero, so
+ * drivers that need to hard-wire endpoint numbers have a hook.
+ *
+ * The protocol is a minimal subset of CDC Ether, which works on any bulk
+ * hardware that's not deeply broken ... even on hardware that can't talk
+ * RNDIS (like SA-1100, with no interrupt endpoint, or anything that
+ * doesn't handle control-OUT).
+ */
+#define SIMPLE_VENDOR_NUM 0x049f
+#define SIMPLE_PRODUCT_NUM 0x505a
+
+/* For hardware that can talk RNDIS and either of the above protocols,
+ * use this ID ... the windows INF files will know it. Unless it's
+ * used with CDC Ethernet, Linux 2.4 hosts will need updates to choose
+ * the non-RNDIS configuration.
+ */
+#define RNDIS_VENDOR_NUM 0x0525 /* NetChip */
+#define RNDIS_PRODUCT_NUM 0xa4a2 /* Ethernet/RNDIS Gadget */
+
+
+/* Some systems will want different product identifers published in the
+ * device descriptor, either numbers or strings or both. These string
+ * parameters are in UTF-8 (superset of ASCII's 7 bit characters).
+ */
+
+static ushort __initdata idVendor;
+module_param(idVendor, ushort, S_IRUGO);
+MODULE_PARM_DESC(idVendor, "USB Vendor ID");
+
+static ushort __initdata idProduct;
+module_param(idProduct, ushort, S_IRUGO);
+MODULE_PARM_DESC(idProduct, "USB Product ID");
+
+static ushort __initdata bcdDevice;
+module_param(bcdDevice, ushort, S_IRUGO);
+MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)");
+
+static char *__initdata iManufacturer;
+module_param(iManufacturer, charp, S_IRUGO);
+MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string");
+
+static char *__initdata iProduct;
+module_param(iProduct, charp, S_IRUGO);
+MODULE_PARM_DESC(iProduct, "USB Product string");
+
+/* initial value, changed by "ifconfig usb0 hw ether xx:xx:xx:xx:xx:xx" */
+static char *__initdata dev_addr;
+module_param(dev_addr, charp, S_IRUGO);
+MODULE_PARM_DESC(dev_addr, "Device Ethernet Address");
+
+/* this address is invisible to ifconfig */
+static char *__initdata host_addr;
+module_param(host_addr, charp, S_IRUGO);
+MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
+
+
+/*-------------------------------------------------------------------------*/
+
+/* Include CDC support if we could run on CDC-capable hardware. */
+
+#ifdef CONFIG_USB_GADGET_NET2280
+#define DEV_CONFIG_CDC
+#endif
+
+#ifdef CONFIG_USB_GADGET_DUMMY_HCD
+#define DEV_CONFIG_CDC
+#endif
+
+#ifdef CONFIG_USB_GADGET_GOKU
+#define DEV_CONFIG_CDC
+#endif
+
+#ifdef CONFIG_USB_GADGET_LH7A40X
+#define DEV_CONFIG_CDC
+#endif
+
+#ifdef CONFIG_USB_GADGET_MQ11XX
+#define DEV_CONFIG_CDC
+#endif
+
+#ifdef CONFIG_USB_GADGET_OMAP
+#define DEV_CONFIG_CDC
+#endif
+
+#ifdef CONFIG_USB_GADGET_N9604
+#define DEV_CONFIG_CDC
+#endif
+
+#ifdef CONFIG_USB_GADGET_PXA27X
+#define DEV_CONFIG_CDC
+#endif
+
+#ifdef CONFIG_USB_GADGET_AT91
+#define DEV_CONFIG_CDC
+#endif
+
+
+/* For CDC-incapable hardware, choose the simple cdc subset.
+ * Anything that talks bulk (without notable bugs) can do this.
+ */
+#ifdef CONFIG_USB_GADGET_PXA2XX
+#define DEV_CONFIG_SUBSET
+#endif
+
+#ifdef CONFIG_USB_GADGET_SH
+#define DEV_CONFIG_SUBSET
+#endif
+
+#ifdef CONFIG_USB_GADGET_SA1100
+/* use non-CDC for backwards compatibility */
+#define DEV_CONFIG_SUBSET
+#endif
+
+#ifdef CONFIG_USB_GADGET_S3C2410
+#define DEV_CONFIG_CDC
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/* "main" config is either CDC, or its simple subset */
+static inline int is_cdc(struct eth_dev *dev)
+{
+#if !defined(DEV_CONFIG_SUBSET)
+ return 1; /* only cdc possible */
+#elif !defined (DEV_CONFIG_CDC)
+ return 0; /* only subset possible */
+#else
+ return dev->cdc; /* depends on what hardware we found */
+#endif
+}
+
+/* "secondary" RNDIS config may sometimes be activated */
+static inline int rndis_active(struct eth_dev *dev)
+{
+#ifdef CONFIG_USB_ETH_RNDIS
+ return dev->rndis;
+#else
+ return 0;
+#endif
+}
+
+#define subset_active(dev) (!is_cdc(dev) && !rndis_active(dev))
+#define cdc_active(dev) ( is_cdc(dev) && !rndis_active(dev))
+
+
+
+#define DEFAULT_QLEN 2 /* double buffering by default */
+
+/* peak bulk transfer bits-per-second */
+#define HS_BPS (13 * 512 * 8 * 1000 * 8)
+#define FS_BPS (19 * 64 * 1 * 1000 * 8)
+
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+
+static unsigned qmult = 5;
+module_param (qmult, uint, S_IRUGO|S_IWUSR);
+
+
+/* for dual-speed hardware, use deeper queues at highspeed */
+#define qlen(gadget) \
+ (DEFAULT_QLEN*((gadget->speed == USB_SPEED_HIGH) ? qmult : 1))
+
+/* also defer IRQs on highspeed TX */
+#define TX_DELAY qmult
+
+#define BITRATE(g) (((g)->speed == USB_SPEED_HIGH) ? HS_BPS : FS_BPS)
+
+#else /* full speed (low speed doesn't do bulk) */
+#define qlen(gadget) DEFAULT_QLEN
+
+#define BITRATE(g) FS_BPS
+#endif
+
+
+/*-------------------------------------------------------------------------*/
+
+#define xprintk(d,level,fmt,args...) \
+ printk(level "%s: " fmt , (d)->net->name , ## args)
+
+#ifdef DEBUG
+#undef DEBUG
+#define DEBUG(dev,fmt,args...) \
+ xprintk(dev , KERN_DEBUG , fmt , ## args)
+#else
+#define DEBUG(dev,fmt,args...) \
+ do { } while (0)
+#endif /* DEBUG */
+
+#ifdef VERBOSE
+#define VDEBUG DEBUG
+#else
+#define VDEBUG(dev,fmt,args...) \
+ do { } while (0)
+#endif /* DEBUG */
+
+#define ERROR(dev,fmt,args...) \
+ xprintk(dev , KERN_ERR , fmt , ## args)
+#define WARN(dev,fmt,args...) \
+ xprintk(dev , KERN_WARNING , fmt , ## args)
+#define INFO(dev,fmt,args...) \
+ xprintk(dev , KERN_INFO , fmt , ## args)
+
+/*-------------------------------------------------------------------------*/
+
+/* USB DRIVER HOOKUP (to the hardware driver, below us), mostly
+ * ep0 implementation: descriptors, config management, setup().
+ * also optional class-specific notification interrupt transfer.
+ */
+
+/*
+ * DESCRIPTORS ... most are static, but strings and (full) configuration
+ * descriptors are built on demand. For now we do either full CDC, or
+ * our simple subset, with RNDIS as an optional second configuration.
+ *
+ * RNDIS includes some CDC ACM descriptors ... like CDC Ethernet. But
+ * the class descriptors match a modem (they're ignored; it's really just
+ * Ethernet functionality), they don't need the NOP altsetting, and the
+ * status transfer endpoint isn't optional.
+ */
+
+#define STRING_MANUFACTURER 1
+#define STRING_PRODUCT 2
+#define STRING_ETHADDR 3
+#define STRING_DATA 4
+#define STRING_CONTROL 5
+#define STRING_RNDIS_CONTROL 6
+#define STRING_CDC 7
+#define STRING_SUBSET 8
+#define STRING_RNDIS 9
+
+#define USB_BUFSIZ 256 /* holds our biggest descriptor */
+
+/*
+ * This device advertises one configuration, eth_config, unless RNDIS
+ * is enabled (rndis_config) on hardware supporting at least two configs.
+ *
+ * NOTE: Controllers like superh_udc should probably be able to use
+ * an RNDIS-only configuration.
+ *
+ * FIXME define some higher-powered configurations to make it easier
+ * to recharge batteries ...
+ */
+
+#define DEV_CONFIG_VALUE 1 /* cdc or subset */
+#define DEV_RNDIS_CONFIG_VALUE 2 /* rndis; optional */
+
+static struct usb_device_descriptor
+device_desc = {
+ .bLength = sizeof device_desc,
+ .bDescriptorType = USB_DT_DEVICE,
+
+ .bcdUSB = __constant_cpu_to_le16 (0x0200),
+
+ .bDeviceClass = USB_CLASS_COMM,
+ .bDeviceSubClass = 0,
+ .bDeviceProtocol = 0,
+
+ .idVendor = __constant_cpu_to_le16 (CDC_VENDOR_NUM),
+ .idProduct = __constant_cpu_to_le16 (CDC_PRODUCT_NUM),
+ .iManufacturer = STRING_MANUFACTURER,
+ .iProduct = STRING_PRODUCT,
+ .bNumConfigurations = 1,
+};
+
+static struct usb_otg_descriptor
+otg_descriptor = {
+ .bLength = sizeof otg_descriptor,
+ .bDescriptorType = USB_DT_OTG,
+
+ .bmAttributes = USB_OTG_SRP,
+};
+
+static struct usb_config_descriptor
+eth_config = {
+ .bLength = sizeof eth_config,
+ .bDescriptorType = USB_DT_CONFIG,
+
+ /* compute wTotalLength on the fly */
+ .bNumInterfaces = 2,
+ .bConfigurationValue = DEV_CONFIG_VALUE,
+ .iConfiguration = STRING_CDC,
+ .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
+ .bMaxPower = 50,
+};
+
+#ifdef CONFIG_USB_ETH_RNDIS
+static struct usb_config_descriptor
+rndis_config = {
+ .bLength = sizeof rndis_config,
+ .bDescriptorType = USB_DT_CONFIG,
+
+ /* compute wTotalLength on the fly */
+ .bNumInterfaces = 2,
+ .bConfigurationValue = DEV_RNDIS_CONFIG_VALUE,
+ .iConfiguration = STRING_RNDIS,
+ .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
+ .bMaxPower = 50,
+};
+#endif
+
+/*
+ * Compared to the simple CDC subset, the full CDC Ethernet model adds
+ * three class descriptors, two interface descriptors, optional status
+ * endpoint. Both have a "data" interface and two bulk endpoints.
+ * There are also differences in how control requests are handled.
+ *
+ * RNDIS shares a lot with CDC-Ethernet, since it's a variant of
+ * the CDC-ACM (modem) spec.
+ */
+
+#ifdef DEV_CONFIG_CDC
+static struct usb_interface_descriptor
+control_intf = {
+ .bLength = sizeof control_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+ .bInterfaceNumber = 0,
+ /* status endpoint is optional; this may be patched later */
+ .bNumEndpoints = 1,
+ .bInterfaceClass = USB_CLASS_COMM,
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET,
+ .bInterfaceProtocol = USB_CDC_PROTO_NONE,
+ .iInterface = STRING_CONTROL,
+};
+#endif
+
+#ifdef CONFIG_USB_ETH_RNDIS
+static const struct usb_interface_descriptor
+rndis_control_intf = {
+ .bLength = sizeof rndis_control_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+ .bInterfaceNumber = 0,
+ .bNumEndpoints = 1,
+ .bInterfaceClass = USB_CLASS_COMM,
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_ACM,
+ .bInterfaceProtocol = USB_CDC_ACM_PROTO_VENDOR,
+ .iInterface = STRING_RNDIS_CONTROL,
+};
+#endif
+
+#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
+
+static const struct usb_cdc_header_desc header_desc = {
+ .bLength = sizeof header_desc,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_HEADER_TYPE,
+
+ .bcdCDC = __constant_cpu_to_le16 (0x0110),
+};
+
+static const struct usb_cdc_union_desc union_desc = {
+ .bLength = sizeof union_desc,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_UNION_TYPE,
+
+ .bMasterInterface0 = 0, /* index of control interface */
+ .bSlaveInterface0 = 1, /* index of DATA interface */
+};
+
+#endif /* CDC || RNDIS */
+
+#ifdef CONFIG_USB_ETH_RNDIS
+
+static const struct usb_cdc_call_mgmt_descriptor call_mgmt_descriptor = {
+ .bLength = sizeof call_mgmt_descriptor,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE,
+
+ .bmCapabilities = 0x00,
+ .bDataInterface = 0x01,
+};
+
+static struct usb_cdc_acm_descriptor acm_descriptor = {
+ .bLength = sizeof acm_descriptor,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_ACM_TYPE,
+
+ .bmCapabilities = 0x00,
+};
+
+#endif
+
+#ifdef DEV_CONFIG_CDC
+
+static const struct usb_cdc_ether_desc ether_desc = {
+ .bLength = sizeof ether_desc,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_ETHERNET_TYPE,
+
+ /* this descriptor actually adds value, surprise! */
+ .iMACAddress = STRING_ETHADDR,
+ .bmEthernetStatistics = __constant_cpu_to_le32 (0), /* no statistics */
+ .wMaxSegmentSize = __constant_cpu_to_le16 (ETH_FRAME_LEN),
+ .wNumberMCFilters = __constant_cpu_to_le16 (0),
+ .bNumberPowerFilters = 0,
+};
+
+#endif
+
+#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
+
+/* include the status endpoint if we can, even where it's optional.
+ * use wMaxPacketSize big enough to fit CDC_NOTIFY_SPEED_CHANGE in one
+ * packet, to simplify cancelation; and a big transfer interval, to
+ * waste less bandwidth.
+ *
+ * some drivers (like Linux 2.4 cdc-ether!) "need" it to exist even
+ * if they ignore the connect/disconnect notifications that real aether
+ * can provide. more advanced cdc configurations might want to support
+ * encapsulated commands (vendor-specific, using control-OUT).
+ *
+ * RNDIS requires the status endpoint, since it uses that encapsulation
+ * mechanism for its funky RPC scheme.
+ */
+
+#define LOG2_STATUS_INTERVAL_MSEC 5 /* 1 << 5 == 32 msec */
+#define STATUS_BYTECOUNT 16 /* 8 byte header + data */
+
+static struct usb_endpoint_descriptor
+fs_status_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .wMaxPacketSize = __constant_cpu_to_le16 (STATUS_BYTECOUNT),
+ .bInterval = 1 << LOG2_STATUS_INTERVAL_MSEC,
+};
+#endif
+
+#ifdef DEV_CONFIG_CDC
+
+/* the default data interface has no endpoints ... */
+
+static const struct usb_interface_descriptor
+data_nop_intf = {
+ .bLength = sizeof data_nop_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+ .bInterfaceNumber = 1,
+ .bAlternateSetting = 0,
+ .bNumEndpoints = 0,
+ .bInterfaceClass = USB_CLASS_CDC_DATA,
+ .bInterfaceSubClass = 0,
+ .bInterfaceProtocol = 0,
+};
+
+/* ... but the "real" data interface has two bulk endpoints */
+
+static const struct usb_interface_descriptor
+data_intf = {
+ .bLength = sizeof data_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+ .bInterfaceNumber = 1,
+ .bAlternateSetting = 1,
+ .bNumEndpoints = 2,
+ .bInterfaceClass = USB_CLASS_CDC_DATA,
+ .bInterfaceSubClass = 0,
+ .bInterfaceProtocol = 0,
+ .iInterface = STRING_DATA,
+};
+
+#endif
+
+#ifdef CONFIG_USB_ETH_RNDIS
+
+/* RNDIS doesn't activate by changing to the "real" altsetting */
+
+static const struct usb_interface_descriptor
+rndis_data_intf = {
+ .bLength = sizeof rndis_data_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+ .bInterfaceNumber = 1,
+ .bAlternateSetting = 0,
+ .bNumEndpoints = 2,
+ .bInterfaceClass = USB_CLASS_CDC_DATA,
+ .bInterfaceSubClass = 0,
+ .bInterfaceProtocol = 0,
+ .iInterface = STRING_DATA,
+};
+
+#endif
+
+#ifdef DEV_CONFIG_SUBSET
+
+/*
+ * "Simple" CDC-subset option is a simple vendor-neutral model that most
+ * full speed controllers can handle: one interface, two bulk endpoints.
+ */
+
+static const struct usb_interface_descriptor
+subset_data_intf = {
+ .bLength = sizeof subset_data_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+ .bInterfaceNumber = 0,
+ .bAlternateSetting = 0,
+ .bNumEndpoints = 2,
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
+ .bInterfaceSubClass = 0,
+ .bInterfaceProtocol = 0,
+ .iInterface = STRING_DATA,
+};
+
+#endif /* SUBSET */
+
+
+static struct usb_endpoint_descriptor
+fs_source_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor
+fs_sink_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static const struct usb_descriptor_header *fs_eth_function [11] = {
+ (struct usb_descriptor_header *) &otg_descriptor,
+#ifdef DEV_CONFIG_CDC
+ /* "cdc" mode descriptors */
+ (struct usb_descriptor_header *) &control_intf,
+ (struct usb_descriptor_header *) &header_desc,
+ (struct usb_descriptor_header *) &union_desc,
+ (struct usb_descriptor_header *) &ether_desc,
+ /* NOTE: status endpoint may need to be removed */
+ (struct usb_descriptor_header *) &fs_status_desc,
+ /* data interface, with altsetting */
+ (struct usb_descriptor_header *) &data_nop_intf,
+ (struct usb_descriptor_header *) &data_intf,
+ (struct usb_descriptor_header *) &fs_source_desc,
+ (struct usb_descriptor_header *) &fs_sink_desc,
+ NULL,
+#endif /* DEV_CONFIG_CDC */
+};
+
+static inline void __init fs_subset_descriptors(void)
+{
+#ifdef DEV_CONFIG_SUBSET
+ fs_eth_function[1] = (struct usb_descriptor_header *) &subset_data_intf;
+ fs_eth_function[2] = (struct usb_descriptor_header *) &fs_source_desc;
+ fs_eth_function[3] = (struct usb_descriptor_header *) &fs_sink_desc;
+ fs_eth_function[4] = NULL;
+#else
+ fs_eth_function[1] = NULL;
+#endif
+}
+
+#ifdef CONFIG_USB_ETH_RNDIS
+static const struct usb_descriptor_header *fs_rndis_function [] = {
+ (struct usb_descriptor_header *) &otg_descriptor,
+ /* control interface matches ACM, not Ethernet */
+ (struct usb_descriptor_header *) &rndis_control_intf,
+ (struct usb_descriptor_header *) &header_desc,
+ (struct usb_descriptor_header *) &call_mgmt_descriptor,
+ (struct usb_descriptor_header *) &acm_descriptor,
+ (struct usb_descriptor_header *) &union_desc,
+ (struct usb_descriptor_header *) &fs_status_desc,
+ /* data interface has no altsetting */
+ (struct usb_descriptor_header *) &rndis_data_intf,
+ (struct usb_descriptor_header *) &fs_source_desc,
+ (struct usb_descriptor_header *) &fs_sink_desc,
+ NULL,
+};
+#endif
+
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+
+/*
+ * usb 2.0 devices need to expose both high speed and full speed
+ * descriptors, unless they only run at full speed.
+ */
+
+#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
+static struct usb_endpoint_descriptor
+hs_status_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .wMaxPacketSize = __constant_cpu_to_le16 (STATUS_BYTECOUNT),
+ .bInterval = LOG2_STATUS_INTERVAL_MSEC + 4,
+};
+#endif /* DEV_CONFIG_CDC */
+
+static struct usb_endpoint_descriptor
+hs_source_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16 (512),
+};
+
+static struct usb_endpoint_descriptor
+hs_sink_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16 (512),
+};
+
+static struct usb_qualifier_descriptor
+dev_qualifier = {
+ .bLength = sizeof dev_qualifier,
+ .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
+
+ .bcdUSB = __constant_cpu_to_le16 (0x0200),
+ .bDeviceClass = USB_CLASS_COMM,
+
+ .bNumConfigurations = 1,
+};
+
+static const struct usb_descriptor_header *hs_eth_function [11] = {
+ (struct usb_descriptor_header *) &otg_descriptor,
+#ifdef DEV_CONFIG_CDC
+ /* "cdc" mode descriptors */
+ (struct usb_descriptor_header *) &control_intf,
+ (struct usb_descriptor_header *) &header_desc,
+ (struct usb_descriptor_header *) &union_desc,
+ (struct usb_descriptor_header *) &ether_desc,
+ /* NOTE: status endpoint may need to be removed */
+ (struct usb_descriptor_header *) &hs_status_desc,
+ /* data interface, with altsetting */
+ (struct usb_descriptor_header *) &data_nop_intf,
+ (struct usb_descriptor_header *) &data_intf,
+ (struct usb_descriptor_header *) &hs_source_desc,
+ (struct usb_descriptor_header *) &hs_sink_desc,
+ NULL,
+#endif /* DEV_CONFIG_CDC */
+};
+
+static inline void __init hs_subset_descriptors(void)
+{
+#ifdef DEV_CONFIG_SUBSET
+ hs_eth_function[1] = (struct usb_descriptor_header *) &subset_data_intf;
+ hs_eth_function[2] = (struct usb_descriptor_header *) &fs_source_desc;
+ hs_eth_function[3] = (struct usb_descriptor_header *) &fs_sink_desc;
+ hs_eth_function[4] = NULL;
+#else
+ hs_eth_function[1] = NULL;
+#endif
+}
+
+#ifdef CONFIG_USB_ETH_RNDIS
+static const struct usb_descriptor_header *hs_rndis_function [] = {
+ (struct usb_descriptor_header *) &otg_descriptor,
+ /* control interface matches ACM, not Ethernet */
+ (struct usb_descriptor_header *) &rndis_control_intf,
+ (struct usb_descriptor_header *) &header_desc,
+ (struct usb_descriptor_header *) &call_mgmt_descriptor,
+ (struct usb_descriptor_header *) &acm_descriptor,
+ (struct usb_descriptor_header *) &union_desc,
+ (struct usb_descriptor_header *) &hs_status_desc,
+ /* data interface has no altsetting */
+ (struct usb_descriptor_header *) &rndis_data_intf,
+ (struct usb_descriptor_header *) &hs_source_desc,
+ (struct usb_descriptor_header *) &hs_sink_desc,
+ NULL,
+};
+#endif
+
+
+/* maxpacket and other transfer characteristics vary by speed. */
+#define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs))
+
+#else
+
+/* if there's no high speed support, maxpacket doesn't change. */
+#define ep_desc(g,hs,fs) fs
+
+static inline void __init hs_subset_descriptors(void)
+{
+}
+
+#endif /* !CONFIG_USB_GADGET_DUALSPEED */
+
+/*-------------------------------------------------------------------------*/
+
+/* descriptors that are built on-demand */
+
+static char manufacturer [50];
+static char product_desc [40] = DRIVER_DESC;
+
+#ifdef DEV_CONFIG_CDC
+/* address that the host will use ... usually assigned at random */
+static char ethaddr [2 * ETH_ALEN + 1];
+#endif
+
+/* static strings, in UTF-8 */
+static struct usb_string strings [] = {
+ { STRING_MANUFACTURER, manufacturer, },
+ { STRING_PRODUCT, product_desc, },
+ { STRING_DATA, "Ethernet Data", },
+#ifdef DEV_CONFIG_CDC
+ { STRING_CDC, "CDC Ethernet", },
+ { STRING_ETHADDR, ethaddr, },
+ { STRING_CONTROL, "CDC Communications Control", },
+#endif
+#ifdef DEV_CONFIG_SUBSET
+ { STRING_SUBSET, "CDC Ethernet Subset", },
+#endif
+#ifdef CONFIG_USB_ETH_RNDIS
+ { STRING_RNDIS, "RNDIS", },
+ { STRING_RNDIS_CONTROL, "RNDIS Communications Control", },
+#endif
+ { } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab = {
+ .language = 0x0409, /* en-us */
+ .strings = strings,
+};
+
+/*
+ * one config, two interfaces: control, data.
+ * complications: class descriptors, and an altsetting.
+ */
+static int
+config_buf (enum usb_device_speed speed,
+ u8 *buf, u8 type,
+ unsigned index, int is_otg)
+{
+ int len;
+ const struct usb_config_descriptor *config;
+ const struct usb_descriptor_header **function;
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+ int hs = (speed == USB_SPEED_HIGH);
+
+ if (type == USB_DT_OTHER_SPEED_CONFIG)
+ hs = !hs;
+#define which_fn(t) (hs ? hs_ ## t ## _function : fs_ ## t ## _function)
+#else
+#define which_fn(t) (fs_ ## t ## _function)
+#endif
+
+ if (index >= device_desc.bNumConfigurations)
+ return -EINVAL;
+
+#ifdef CONFIG_USB_ETH_RNDIS
+ /* list the RNDIS config first, to make Microsoft's drivers
+ * happy. DOCSIS 1.0 needs this too.
+ */
+ if (device_desc.bNumConfigurations == 2 && index == 0) {
+ config = &rndis_config;
+ function = which_fn (rndis);
+ } else
+#endif
+ {
+ config = &eth_config;
+ function = which_fn (eth);
+ }
+
+ /* for now, don't advertise srp-only devices */
+ if (!is_otg)
+ function++;
+
+ len = usb_gadget_config_buf (config, buf, USB_BUFSIZ, function);
+ if (len < 0)
+ return len;
+ ((struct usb_config_descriptor *) buf)->bDescriptorType = type;
+ return len;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void eth_start (struct eth_dev *dev, int gfp_flags);
+static int alloc_requests (struct eth_dev *dev, unsigned n, int gfp_flags);
+
+#ifdef DEV_CONFIG_CDC
+static inline int ether_alt_ep_setup (struct eth_dev *dev, struct usb_ep *ep)
+{
+ const struct usb_endpoint_descriptor *d;
+
+ /* With CDC, the host isn't allowed to use these two data
+ * endpoints in the default altsetting for the interface.
+ * so we don't activate them yet. Reset from SET_INTERFACE.
+ *
+ * Strictly speaking RNDIS should work the same: activation is
+ * a side effect of setting a packet filter. Deactivation is
+ * from REMOTE_NDIS_HALT_MSG, reset from REMOTE_NDIS_RESET_MSG.
+ */
+
+ /* one endpoint writes data back IN to the host */
+ if (strcmp (ep->name, EP_IN_NAME) == 0) {
+ d = ep_desc (dev->gadget, &hs_source_desc, &fs_source_desc);
+ ep->driver_data = dev;
+ dev->in = d;
+
+ /* one endpoint just reads OUT packets */
+ } else if (strcmp (ep->name, EP_OUT_NAME) == 0) {
+ d = ep_desc (dev->gadget, &hs_sink_desc, &fs_sink_desc);
+ ep->driver_data = dev;
+ dev->out = d;
+
+ /* optional status/notification endpoint */
+ } else if (EP_STATUS_NAME &&
+ strcmp (ep->name, EP_STATUS_NAME) == 0) {
+ int result;
+
+ d = ep_desc (dev->gadget, &hs_status_desc, &fs_status_desc);
+ result = usb_ep_enable (ep, d);
+ if (result < 0)
+ return result;
+
+ ep->driver_data = dev;
+ dev->status = d;
+ }
+ return 0;
+}
+#endif
+
+#if defined(DEV_CONFIG_SUBSET) || defined(CONFIG_USB_ETH_RNDIS)
+static inline int ether_ep_setup (struct eth_dev *dev, struct usb_ep *ep)
+{
+ int result;
+ const struct usb_endpoint_descriptor *d;
+
+ /* CDC subset is simpler: if the device is there,
+ * it's live with rx and tx endpoints.
+ *
+ * Do this as a shortcut for RNDIS too.
+ */
+
+ /* one endpoint writes data back IN to the host */
+ if (strcmp (ep->name, EP_IN_NAME) == 0) {
+ d = ep_desc (dev->gadget, &hs_source_desc, &fs_source_desc);
+ result = usb_ep_enable (ep, d);
+ if (result < 0)
+ return result;
+
+ ep->driver_data = dev;
+ dev->in = d;
+
+ /* one endpoint just reads OUT packets */
+ } else if (strcmp (ep->name, EP_OUT_NAME) == 0) {
+ d = ep_desc (dev->gadget, &hs_sink_desc, &fs_sink_desc);
+ result = usb_ep_enable (ep, d);
+ if (result < 0)
+ return result;
+
+ ep->driver_data = dev;
+ dev->out = d;
+ }
+
+ return 0;
+}
+#endif
+
+static int
+set_ether_config (struct eth_dev *dev, int gfp_flags)
+{
+ int result = 0;
+ struct usb_ep *ep;
+ struct usb_gadget *gadget = dev->gadget;
+
+ gadget_for_each_ep (ep, gadget) {
+#ifdef DEV_CONFIG_CDC
+ if (!dev->rndis && dev->cdc) {
+ result = ether_alt_ep_setup (dev, ep);
+ if (result == 0)
+ continue;
+ }
+#endif
+
+#ifdef CONFIG_USB_ETH_RNDIS
+ if (dev->rndis && strcmp (ep->name, EP_STATUS_NAME) == 0) {
+ const struct usb_endpoint_descriptor *d;
+ d = ep_desc (gadget, &hs_status_desc, &fs_status_desc);
+ result = usb_ep_enable (ep, d);
+ if (result == 0) {
+ ep->driver_data = dev;
+ dev->status = d;
+ continue;
+ }
+ } else
+#endif
+
+ {
+#if defined(DEV_CONFIG_SUBSET) || defined(CONFIG_USB_ETH_RNDIS)
+ result = ether_ep_setup (dev, ep);
+ if (result == 0)
+ continue;
+#endif
+ }
+
+ /* stop on error */
+ ERROR (dev, "can't enable %s, result %d\n", ep->name, result);
+ break;
+ }
+ if (!result && (!dev->in_ep || !dev->out_ep))
+ result = -ENODEV;
+
+ if (result == 0)
+ result = alloc_requests (dev, qlen (gadget), gfp_flags);
+
+ /* on error, disable any endpoints */
+ if (result < 0) {
+#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
+ if (dev->status)
+ (void) usb_ep_disable (dev->status_ep);
+#endif
+ dev->status = NULL;
+#if defined(DEV_CONFIG_SUBSET) || defined(CONFIG_USB_ETH_RNDIS)
+ if (dev->rndis || !dev->cdc) {
+ if (dev->in)
+ (void) usb_ep_disable (dev->in_ep);
+ if (dev->out)
+ (void) usb_ep_disable (dev->out_ep);
+ }
+#endif
+ dev->in = NULL;
+ dev->out = NULL;
+ } else
+
+ /* activate non-CDC configs right away
+ * this isn't strictly according to the RNDIS spec
+ */
+#if defined(DEV_CONFIG_SUBSET) || defined(CONFIG_USB_ETH_RNDIS)
+ if (dev->rndis || !dev->cdc) {
+ netif_carrier_on (dev->net);
+ if (netif_running (dev->net)) {
+ spin_unlock (&dev->lock);
+ eth_start (dev, GFP_ATOMIC);
+ spin_lock (&dev->lock);
+ }
+ }
+#endif
+
+ if (result == 0)
+ DEBUG (dev, "qlen %d\n", qlen (gadget));
+
+ /* caller is responsible for cleanup on error */
+ return result;
+}
+
+static void eth_reset_config (struct eth_dev *dev)
+{
+ struct usb_request *req;
+
+ if (dev->config == 0)
+ return;
+
+ DEBUG (dev, "%s\n", __FUNCTION__);
+
+ netif_stop_queue (dev->net);
+ netif_carrier_off (dev->net);
+
+ /* disable endpoints, forcing (synchronous) completion of
+ * pending i/o. then free the requests.
+ */
+ if (dev->in) {
+ usb_ep_disable (dev->in_ep);
+ while (likely (!list_empty (&dev->tx_reqs))) {
+ req = container_of (dev->tx_reqs.next,
+ struct usb_request, list);
+ list_del (&req->list);
+ usb_ep_free_request (dev->in_ep, req);
+ }
+ }
+ if (dev->out) {
+ usb_ep_disable (dev->out_ep);
+ while (likely (!list_empty (&dev->rx_reqs))) {
+ req = container_of (dev->rx_reqs.next,
+ struct usb_request, list);
+ list_del (&req->list);
+ usb_ep_free_request (dev->out_ep, req);
+ }
+ }
+
+ if (dev->status) {
+ usb_ep_disable (dev->status_ep);
+ }
+ dev->config = 0;
+}
+
+/* change our operational config. must agree with the code
+ * that returns config descriptors, and altsetting code.
+ */
+static int
+eth_set_config (struct eth_dev *dev, unsigned number, int gfp_flags)
+{
+ int result = 0;
+ struct usb_gadget *gadget = dev->gadget;
+
+ if (number == dev->config)
+ return 0;
+
+ if (gadget_is_sa1100 (gadget)
+ && dev->config
+ && atomic_read (&dev->tx_qlen) != 0) {
+ /* tx fifo is full, but we can't clear it...*/
+ INFO (dev, "can't change configurations\n");
+ return -ESPIPE;
+ }
+ eth_reset_config (dev);
+
+ /* default: pass all packets, no multicast filtering */
+ dev->cdc_filter = 0x000f;
+
+ switch (number) {
+ case DEV_CONFIG_VALUE:
+ dev->rndis = 0;
+ result = set_ether_config (dev, gfp_flags);
+ break;
+#ifdef CONFIG_USB_ETH_RNDIS
+ case DEV_RNDIS_CONFIG_VALUE:
+ dev->rndis = 1;
+ result = set_ether_config (dev, gfp_flags);
+ break;
+#endif
+ default:
+ result = -EINVAL;
+ /* FALL THROUGH */
+ case 0:
+ break;
+ }
+
+ if (result) {
+ if (number)
+ eth_reset_config (dev);
+ usb_gadget_vbus_draw(dev->gadget,
+ dev->gadget->is_otg ? 8 : 100);
+ } else {
+ char *speed;
+ unsigned power;
+
+ power = 2 * eth_config.bMaxPower;
+ usb_gadget_vbus_draw(dev->gadget, power);
+
+ switch (gadget->speed) {
+ case USB_SPEED_FULL: speed = "full"; break;
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+ case USB_SPEED_HIGH: speed = "high"; break;
+#endif
+ default: speed = "?"; break;
+ }
+
+ dev->config = number;
+ INFO (dev, "%s speed config #%d: %d mA, %s, using %s\n",
+ speed, number, power, driver_desc,
+ dev->rndis
+ ? "RNDIS"
+ : (dev->cdc
+ ? "CDC Ethernet"
+ : "CDC Ethernet Subset"));
+ }
+ return result;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef DEV_CONFIG_CDC
+
+static void eth_status_complete (struct usb_ep *ep, struct usb_request *req)
+{
+ struct usb_cdc_notification *event = req->buf;
+ int value = req->status;
+ struct eth_dev *dev = ep->driver_data;
+
+ /* issue the second notification if host reads the first */
+ if (event->bNotificationType == USB_CDC_NOTIFY_NETWORK_CONNECTION
+ && value == 0) {
+ __le32 *data = req->buf + sizeof *event;
+
+ event->bmRequestType = 0xA1;
+ event->bNotificationType = USB_CDC_NOTIFY_SPEED_CHANGE;
+ event->wValue = __constant_cpu_to_le16 (0);
+ event->wIndex = __constant_cpu_to_le16 (1);
+ event->wLength = __constant_cpu_to_le16 (8);
+
+ /* SPEED_CHANGE data is up/down speeds in bits/sec */
+ data [0] = data [1] = cpu_to_le32 (BITRATE (dev->gadget));
+
+ req->length = STATUS_BYTECOUNT;
+ value = usb_ep_queue (ep, req, GFP_ATOMIC);
+ DEBUG (dev, "send SPEED_CHANGE --> %d\n", value);
+ if (value == 0)
+ return;
+ } else if (value != -ECONNRESET)
+ DEBUG (dev, "event %02x --> %d\n",
+ event->bNotificationType, value);
+ event->bmRequestType = 0xff;
+}
+
+static void issue_start_status (struct eth_dev *dev)
+{
+ struct usb_request *req = dev->stat_req;
+ struct usb_cdc_notification *event;
+ int value;
+
+ DEBUG (dev, "%s, flush old status first\n", __FUNCTION__);
+
+ /* flush old status
+ *
+ * FIXME ugly idiom, maybe we'd be better with just
+ * a "cancel the whole queue" primitive since any
+ * unlink-one primitive has way too many error modes.
+ * here, we "know" toggle is already clear...
+ */
+ usb_ep_disable (dev->status_ep);
+ usb_ep_enable (dev->status_ep, dev->status);
+
+ /* 3.8.1 says to issue first NETWORK_CONNECTION, then
+ * a SPEED_CHANGE. could be useful in some configs.
+ */
+ event = req->buf;
+ event->bmRequestType = 0xA1;
+ event->bNotificationType = USB_CDC_NOTIFY_NETWORK_CONNECTION;
+ event->wValue = __constant_cpu_to_le16 (1); /* connected */
+ event->wIndex = __constant_cpu_to_le16 (1);
+ event->wLength = 0;
+
+ req->length = sizeof *event;
+ req->complete = eth_status_complete;
+ value = usb_ep_queue (dev->status_ep, req, GFP_ATOMIC);
+ if (value < 0)
+ DEBUG (dev, "status buf queue --> %d\n", value);
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+static void eth_setup_complete (struct usb_ep *ep, struct usb_request *req)
+{
+ if (req->status || req->actual != req->length)
+ DEBUG ((struct eth_dev *) ep->driver_data,
+ "setup complete --> %d, %d/%d\n",
+ req->status, req->actual, req->length);
+}
+
+#ifdef CONFIG_USB_ETH_RNDIS
+
+static void rndis_response_complete (struct usb_ep *ep, struct usb_request *req)
+{
+ if (req->status || req->actual != req->length)
+ DEBUG ((struct eth_dev *) ep->driver_data,
+ "rndis response complete --> %d, %d/%d\n",
+ req->status, req->actual, req->length);
+
+ /* done sending after USB_CDC_GET_ENCAPSULATED_RESPONSE */
+}
+
+static void rndis_command_complete (struct usb_ep *ep, struct usb_request *req)
+{
+ struct eth_dev *dev = ep->driver_data;
+ int status;
+
+ /* received RNDIS command from USB_CDC_SEND_ENCAPSULATED_COMMAND */
+ spin_lock(&dev->lock);
+ status = rndis_msg_parser (dev->rndis_config, (u8 *) req->buf);
+ if (status < 0)
+ ERROR(dev, "%s: rndis parse error %d\n", __FUNCTION__, status);
+ spin_unlock(&dev->lock);
+}
+
+#endif /* RNDIS */
+
+/*
+ * The setup() callback implements all the ep0 functionality that's not
+ * handled lower down. CDC has a number of less-common features:
+ *
+ * - two interfaces: control, and ethernet data
+ * - Ethernet data interface has two altsettings: default, and active
+ * - class-specific descriptors for the control interface
+ * - class-specific control requests
+ */
+static int
+eth_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
+{
+ struct eth_dev *dev = get_gadget_data (gadget);
+ struct usb_request *req = dev->req;
+ int value = -EOPNOTSUPP;
+ u16 wIndex = ctrl->wIndex;
+ u16 wValue = ctrl->wValue;
+ u16 wLength = ctrl->wLength;
+
+ /* descriptors just go into the pre-allocated ep0 buffer,
+ * while config change events may enable network traffic.
+ */
+ req->complete = eth_setup_complete;
+ switch (ctrl->bRequest) {
+
+ case USB_REQ_GET_DESCRIPTOR:
+ if (ctrl->bRequestType != USB_DIR_IN)
+ break;
+ switch (wValue >> 8) {
+
+ case USB_DT_DEVICE:
+ value = min (wLength, (u16) sizeof device_desc);
+ memcpy (req->buf, &device_desc, value);
+ break;
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+ case USB_DT_DEVICE_QUALIFIER:
+ if (!gadget->is_dualspeed)
+ break;
+ value = min (wLength, (u16) sizeof dev_qualifier);
+ memcpy (req->buf, &dev_qualifier, value);
+ break;
+
+ case USB_DT_OTHER_SPEED_CONFIG:
+ if (!gadget->is_dualspeed)
+ break;
+ // FALLTHROUGH
+#endif /* CONFIG_USB_GADGET_DUALSPEED */
+ case USB_DT_CONFIG:
+ value = config_buf (gadget->speed, req->buf,
+ wValue >> 8,
+ wValue & 0xff,
+ gadget->is_otg);
+ if (value >= 0)
+ value = min (wLength, (u16) value);
+ break;
+
+ case USB_DT_STRING:
+ value = usb_gadget_get_string (&stringtab,
+ wValue & 0xff, req->buf);
+ if (value >= 0)
+ value = min (wLength, (u16) value);
+ break;
+ }
+ break;
+
+ case USB_REQ_SET_CONFIGURATION:
+ if (ctrl->bRequestType != 0)
+ break;
+ if (gadget->a_hnp_support)
+ DEBUG (dev, "HNP available\n");
+ else if (gadget->a_alt_hnp_support)
+ DEBUG (dev, "HNP needs a different root port\n");
+ spin_lock (&dev->lock);
+ value = eth_set_config (dev, wValue, GFP_ATOMIC);
+ spin_unlock (&dev->lock);
+ break;
+ case USB_REQ_GET_CONFIGURATION:
+ if (ctrl->bRequestType != USB_DIR_IN)
+ break;
+ *(u8 *)req->buf = dev->config;
+ value = min (wLength, (u16) 1);
+ break;
+
+ case USB_REQ_SET_INTERFACE:
+ if (ctrl->bRequestType != USB_RECIP_INTERFACE
+ || !dev->config
+ || wIndex > 1)
+ break;
+ if (!dev->cdc && wIndex != 0)
+ break;
+ spin_lock (&dev->lock);
+
+ /* PXA hardware partially handles SET_INTERFACE;
+ * we need to kluge around that interference.
+ */
+ if (gadget_is_pxa (gadget)) {
+ value = eth_set_config (dev, DEV_CONFIG_VALUE,
+ GFP_ATOMIC);
+ goto done_set_intf;
+ }
+
+#ifdef DEV_CONFIG_CDC
+ switch (wIndex) {
+ case 0: /* control/master intf */
+ if (wValue != 0)
+ break;
+ if (dev->status) {
+ usb_ep_disable (dev->status_ep);
+ usb_ep_enable (dev->status_ep, dev->status);
+ }
+ value = 0;
+ break;
+ case 1: /* data intf */
+ if (wValue > 1)
+ break;
+ usb_ep_disable (dev->in_ep);
+ usb_ep_disable (dev->out_ep);
+
+ /* CDC requires the data transfers not be done from
+ * the default interface setting ... also, setting
+ * the non-default interface clears filters etc.
+ */
+ if (wValue == 1) {
+ usb_ep_enable (dev->in_ep, dev->in);
+ usb_ep_enable (dev->out_ep, dev->out);
+ dev->cdc_filter = DEFAULT_FILTER;
+ netif_carrier_on (dev->net);
+ if (dev->status)
+ issue_start_status (dev);
+ if (netif_running (dev->net)) {
+ spin_unlock (&dev->lock);
+ eth_start (dev, GFP_ATOMIC);
+ spin_lock (&dev->lock);
+ }
+ } else {
+ netif_stop_queue (dev->net);
+ netif_carrier_off (dev->net);
+ }
+ value = 0;
+ break;
+ }
+#else
+ /* FIXME this is wrong, as is the assumption that
+ * all non-PXA hardware talks real CDC ...
+ */
+ dev_warn (&gadget->dev, "set_interface ignored!\n");
+#endif /* DEV_CONFIG_CDC */
+
+done_set_intf:
+ spin_unlock (&dev->lock);
+ break;
+ case USB_REQ_GET_INTERFACE:
+ if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)
+ || !dev->config
+ || wIndex > 1)
+ break;
+ if (!(dev->cdc || dev->rndis) && wIndex != 0)
+ break;
+
+ /* for CDC, iff carrier is on, data interface is active. */
+ if (dev->rndis || wIndex != 1)
+ *(u8 *)req->buf = 0;
+ else
+ *(u8 *)req->buf = netif_carrier_ok (dev->net) ? 1 : 0;
+ value = min (wLength, (u16) 1);
+ break;
+
+#ifdef DEV_CONFIG_CDC
+ case USB_CDC_SET_ETHERNET_PACKET_FILTER:
+ /* see 6.2.30: no data, wIndex = interface,
+ * wValue = packet filter bitmap
+ */
+ if (ctrl->bRequestType != (USB_TYPE_CLASS|USB_RECIP_INTERFACE)
+ || !dev->cdc
+ || dev->rndis
+ || wLength != 0
+ || wIndex > 1)
+ break;
+ DEBUG (dev, "packet filter %02x\n", wValue);
+ dev->cdc_filter = wValue;
+ value = 0;
+ break;
+
+ /* and potentially:
+ * case USB_CDC_SET_ETHERNET_MULTICAST_FILTERS:
+ * case USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER:
+ * case USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER:
+ * case USB_CDC_GET_ETHERNET_STATISTIC:
+ */
+
+#endif /* DEV_CONFIG_CDC */
+
+#ifdef CONFIG_USB_ETH_RNDIS
+ /* RNDIS uses the CDC command encapsulation mechanism to implement
+ * an RPC scheme, with much getting/setting of attributes by OID.
+ */
+ case USB_CDC_SEND_ENCAPSULATED_COMMAND:
+ if (ctrl->bRequestType != (USB_TYPE_CLASS|USB_RECIP_INTERFACE)
+ || !dev->rndis
+ || wLength > USB_BUFSIZ
+ || wValue
+ || rndis_control_intf.bInterfaceNumber
+ != wIndex)
+ break;
+ /* read the request, then process it */
+ value = wLength;
+ req->complete = rndis_command_complete;
+ /* later, rndis_control_ack () sends a notification */
+ break;
+
+ case USB_CDC_GET_ENCAPSULATED_RESPONSE:
+ if ((USB_DIR_IN|USB_TYPE_CLASS|USB_RECIP_INTERFACE)
+ == ctrl->bRequestType
+ && dev->rndis
+ // && wLength >= 0x0400
+ && !wValue
+ && rndis_control_intf.bInterfaceNumber
+ == wIndex) {
+ u8 *buf;
+
+ /* return the result */
+ buf = rndis_get_next_response (dev->rndis_config,
+ &value);
+ if (buf) {
+ memcpy (req->buf, buf, value);
+ req->complete = rndis_response_complete;
+ rndis_free_response(dev->rndis_config, buf);
+ }
+ /* else stalls ... spec says to avoid that */
+ }
+ break;
+#endif /* RNDIS */
+
+ default:
+ VDEBUG (dev,
+ "unknown control req%02x.%02x v%04x i%04x l%d\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ wValue, wIndex, wLength);
+ }
+
+ /* respond with data transfer before status phase? */
+ if (value >= 0) {
+ req->length = value;
+ req->zero = value < wLength
+ && (value % gadget->ep0->maxpacket) == 0;
+ value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC);
+ if (value < 0) {
+ DEBUG (dev, "ep_queue --> %d\n", value);
+ req->status = 0;
+ eth_setup_complete (gadget->ep0, req);
+ }
+ }
+
+ /* host either stalls (value < 0) or reports success */
+ return value;
+}
+
+static void
+eth_disconnect (struct usb_gadget *gadget)
+{
+ struct eth_dev *dev = get_gadget_data (gadget);
+ unsigned long flags;
+
+ spin_lock_irqsave (&dev->lock, flags);
+ netif_stop_queue (dev->net);
+ netif_carrier_off (dev->net);
+ eth_reset_config (dev);
+ spin_unlock_irqrestore (&dev->lock, flags);
+
+ /* FIXME RNDIS should enter RNDIS_UNINITIALIZED */
+
+ /* next we may get setup() calls to enumerate new connections;
+ * or an unbind() during shutdown (including removing module).
+ */
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* NETWORK DRIVER HOOKUP (to the layer above this driver) */
+
+static int eth_change_mtu (struct net_device *net, int new_mtu)
+{
+ struct eth_dev *dev = netdev_priv(net);
+
+ // FIXME if rndis, don't change while link's live
+
+ if (new_mtu <= ETH_HLEN || new_mtu > ETH_FRAME_LEN)
+ return -ERANGE;
+ /* no zero-length packet read wanted after mtu-sized packets */
+ if (((new_mtu + sizeof (struct ethhdr)) % dev->in_ep->maxpacket) == 0)
+ return -EDOM;
+ net->mtu = new_mtu;
+ return 0;
+}
+
+static struct net_device_stats *eth_get_stats (struct net_device *net)
+{
+ return &((struct eth_dev *)netdev_priv(net))->stats;
+}
+
+static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p)
+{
+ struct eth_dev *dev = netdev_priv(net);
+ strlcpy(p->driver, shortname, sizeof p->driver);
+ strlcpy(p->version, DRIVER_VERSION, sizeof p->version);
+ strlcpy(p->fw_version, dev->gadget->name, sizeof p->fw_version);
+ strlcpy (p->bus_info, dev->gadget->dev.bus_id, sizeof p->bus_info);
+}
+
+static u32 eth_get_link(struct net_device *net)
+{
+ struct eth_dev *dev = netdev_priv(net);
+ return dev->gadget->speed != USB_SPEED_UNKNOWN;
+}
+
+static struct ethtool_ops ops = {
+ .get_drvinfo = eth_get_drvinfo,
+ .get_link = eth_get_link
+};
+
+static void defer_kevent (struct eth_dev *dev, int flag)
+{
+ if (test_and_set_bit (flag, &dev->todo))
+ return;
+ if (!schedule_work (&dev->work))
+ ERROR (dev, "kevent %d may have been dropped\n", flag);
+ else
+ DEBUG (dev, "kevent %d scheduled\n", flag);
+}
+
+static void rx_complete (struct usb_ep *ep, struct usb_request *req);
+
+static int
+rx_submit (struct eth_dev *dev, struct usb_request *req, int gfp_flags)
+{
+ struct sk_buff *skb;
+ int retval = -ENOMEM;
+ size_t size;
+
+ /* Padding up to RX_EXTRA handles minor disagreements with host.
+ * Normally we use the USB "terminate on short read" convention;
+ * so allow up to (N*maxpacket), since that memory is normally
+ * already allocated. Some hardware doesn't deal well with short
+ * reads (e.g. DMA must be N*maxpacket), so for now don't trim a
+ * byte off the end (to force hardware errors on overflow).
+ *
+ * RNDIS uses internal framing, and explicitly allows senders to
+ * pad to end-of-packet. That's potentially nice for speed,
+ * but means receivers can't recover synch on their own.
+ */
+ size = (sizeof (struct ethhdr) + dev->net->mtu + RX_EXTRA);
+ size += dev->out_ep->maxpacket - 1;
+#ifdef CONFIG_USB_ETH_RNDIS
+ if (dev->rndis)
+ size += sizeof (struct rndis_packet_msg_type);
+#endif
+ size -= size % dev->out_ep->maxpacket;
+
+ if ((skb = alloc_skb (size + NET_IP_ALIGN, gfp_flags)) == 0) {
+ DEBUG (dev, "no rx skb\n");
+ goto enomem;
+ }
+
+ /* Some platforms perform better when IP packets are aligned,
+ * but on at least one, checksumming fails otherwise. Note:
+ * this doesn't account for variable-sized RNDIS headers.
+ */
+ skb_reserve(skb, NET_IP_ALIGN);
+
+ req->buf = skb->data;
+ req->length = size;
+ req->complete = rx_complete;
+ req->context = skb;
+
+ retval = usb_ep_queue (dev->out_ep, req, gfp_flags);
+ if (retval == -ENOMEM)
+enomem:
+ defer_kevent (dev, WORK_RX_MEMORY);
+ if (retval) {
+ DEBUG (dev, "rx submit --> %d\n", retval);
+ dev_kfree_skb_any (skb);
+ spin_lock (&dev->lock);
+ list_add (&req->list, &dev->rx_reqs);
+ spin_unlock (&dev->lock);
+ }
+ return retval;
+}
+
+static void rx_complete (struct usb_ep *ep, struct usb_request *req)
+{
+ struct sk_buff *skb = req->context;
+ struct eth_dev *dev = ep->driver_data;
+ int status = req->status;
+
+ switch (status) {
+
+ /* normal completion */
+ case 0:
+ skb_put (skb, req->actual);
+#ifdef CONFIG_USB_ETH_RNDIS
+ /* we know MaxPacketsPerTransfer == 1 here */
+ if (dev->rndis)
+ rndis_rm_hdr (req->buf, &(skb->len));
+#endif
+ if (ETH_HLEN > skb->len || skb->len > ETH_FRAME_LEN) {
+ dev->stats.rx_errors++;
+ dev->stats.rx_length_errors++;
+ DEBUG (dev, "rx length %d\n", skb->len);
+ break;
+ }
+
+ skb->dev = dev->net;
+ skb->protocol = eth_type_trans (skb, dev->net);
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += skb->len;
+
+ /* no buffer copies needed, unless hardware can't
+ * use skb buffers.
+ */
+ status = netif_rx (skb);
+ skb = NULL;
+ break;
+
+ /* software-driven interface shutdown */
+ case -ECONNRESET: // unlink
+ case -ESHUTDOWN: // disconnect etc
+ VDEBUG (dev, "rx shutdown, code %d\n", status);
+ goto quiesce;
+
+ /* for hardware automagic (such as pxa) */
+ case -ECONNABORTED: // endpoint reset
+ DEBUG (dev, "rx %s reset\n", ep->name);
+ defer_kevent (dev, WORK_RX_MEMORY);
+quiesce:
+ dev_kfree_skb_any (skb);
+ goto clean;
+
+ /* data overrun */
+ case -EOVERFLOW:
+ dev->stats.rx_over_errors++;
+ // FALLTHROUGH
+
+ default:
+ dev->stats.rx_errors++;
+ DEBUG (dev, "rx status %d\n", status);
+ break;
+ }
+
+ if (skb)
+ dev_kfree_skb_any (skb);
+ if (!netif_running (dev->net)) {
+clean:
+ /* nobody reading rx_reqs, so no dev->lock */
+ list_add (&req->list, &dev->rx_reqs);
+ req = NULL;
+ }
+ if (req)
+ rx_submit (dev, req, GFP_ATOMIC);
+}
+
+static int prealloc (struct list_head *list, struct usb_ep *ep,
+ unsigned n, int gfp_flags)
+{
+ unsigned i;
+ struct usb_request *req;
+
+ if (!n)
+ return -ENOMEM;
+
+ /* queue/recycle up to N requests */
+ i = n;
+ list_for_each_entry (req, list, list) {
+ if (i-- == 0)
+ goto extra;
+ }
+ while (i--) {
+ req = usb_ep_alloc_request (ep, gfp_flags);
+ if (!req)
+ return list_empty (list) ? -ENOMEM : 0;
+ list_add (&req->list, list);
+ }
+ return 0;
+
+extra:
+ /* free extras */
+ for (;;) {
+ struct list_head *next;
+
+ next = req->list.next;
+ list_del (&req->list);
+ usb_ep_free_request (ep, req);
+
+ if (next == list)
+ break;
+
+ req = container_of (next, struct usb_request, list);
+ }
+ return 0;
+}
+
+static int alloc_requests (struct eth_dev *dev, unsigned n, int gfp_flags)
+{
+ int status;
+
+ status = prealloc (&dev->tx_reqs, dev->in_ep, n, gfp_flags);
+ if (status < 0)
+ goto fail;
+ status = prealloc (&dev->rx_reqs, dev->out_ep, n, gfp_flags);
+ if (status < 0)
+ goto fail;
+ return 0;
+fail:
+ DEBUG (dev, "can't alloc requests\n");
+ return status;
+}
+
+static void rx_fill (struct eth_dev *dev, int gfp_flags)
+{
+ struct usb_request *req;
+ unsigned long flags;
+
+ clear_bit (WORK_RX_MEMORY, &dev->todo);
+
+ /* fill unused rxq slots with some skb */
+ spin_lock_irqsave (&dev->lock, flags);
+ while (!list_empty (&dev->rx_reqs)) {
+ req = container_of (dev->rx_reqs.next,
+ struct usb_request, list);
+ list_del_init (&req->list);
+ spin_unlock_irqrestore (&dev->lock, flags);
+
+ if (rx_submit (dev, req, gfp_flags) < 0) {
+ defer_kevent (dev, WORK_RX_MEMORY);
+ return;
+ }
+
+ spin_lock_irqsave (&dev->lock, flags);
+ }
+ spin_unlock_irqrestore (&dev->lock, flags);
+}
+
+static void eth_work (void *_dev)
+{
+ struct eth_dev *dev = _dev;
+
+ if (test_bit (WORK_RX_MEMORY, &dev->todo)) {
+ if (netif_running (dev->net))
+ rx_fill (dev, GFP_KERNEL);
+ else
+ clear_bit (WORK_RX_MEMORY, &dev->todo);
+ }
+
+ if (dev->todo)
+ DEBUG (dev, "work done, flags = 0x%lx\n", dev->todo);
+}
+
+static void tx_complete (struct usb_ep *ep, struct usb_request *req)
+{
+ struct sk_buff *skb = req->context;
+ struct eth_dev *dev = ep->driver_data;
+
+ switch (req->status) {
+ default:
+ dev->stats.tx_errors++;
+ VDEBUG (dev, "tx err %d\n", req->status);
+ /* FALLTHROUGH */
+ case -ECONNRESET: // unlink
+ case -ESHUTDOWN: // disconnect etc
+ break;
+ case 0:
+ dev->stats.tx_bytes += skb->len;
+ }
+ dev->stats.tx_packets++;
+
+ spin_lock (&dev->lock);
+ list_add (&req->list, &dev->tx_reqs);
+ spin_unlock (&dev->lock);
+ dev_kfree_skb_any (skb);
+
+ atomic_dec (&dev->tx_qlen);
+ if (netif_carrier_ok (dev->net))
+ netif_wake_queue (dev->net);
+}
+
+static inline int eth_is_promisc (struct eth_dev *dev)
+{
+ /* no filters for the CDC subset; always promisc */
+ if (subset_active (dev))
+ return 1;
+ return dev->cdc_filter & USB_CDC_PACKET_TYPE_PROMISCUOUS;
+}
+
+static int eth_start_xmit (struct sk_buff *skb, struct net_device *net)
+{
+ struct eth_dev *dev = netdev_priv(net);
+ int length = skb->len;
+ int retval;
+ struct usb_request *req = NULL;
+ unsigned long flags;
+
+ /* apply outgoing CDC or RNDIS filters */
+ if (!eth_is_promisc (dev)) {
+ u8 *dest = skb->data;
+
+ if (dest [0] & 0x01) {
+ u16 type;
+
+ /* ignores USB_CDC_PACKET_TYPE_MULTICAST and host
+ * SET_ETHERNET_MULTICAST_FILTERS requests
+ */
+ if (memcmp (dest, net->broadcast, ETH_ALEN) == 0)
+ type = USB_CDC_PACKET_TYPE_BROADCAST;
+ else
+ type = USB_CDC_PACKET_TYPE_ALL_MULTICAST;
+ if (!(dev->cdc_filter & type)) {
+ dev_kfree_skb_any (skb);
+ return 0;
+ }
+ }
+ /* ignores USB_CDC_PACKET_TYPE_DIRECTED */
+ }
+
+ spin_lock_irqsave (&dev->lock, flags);
+ req = container_of (dev->tx_reqs.next, struct usb_request, list);
+ list_del (&req->list);
+ if (list_empty (&dev->tx_reqs))
+ netif_stop_queue (net);
+ spin_unlock_irqrestore (&dev->lock, flags);
+
+ /* no buffer copies needed, unless the network stack did it
+ * or the hardware can't use skb buffers.
+ * or there's not enough space for any RNDIS headers we need
+ */
+#ifdef CONFIG_USB_ETH_RNDIS
+ if (dev->rndis) {
+ struct sk_buff *skb_rndis;
+
+ skb_rndis = skb_realloc_headroom (skb,
+ sizeof (struct rndis_packet_msg_type));
+ if (!skb_rndis)
+ goto drop;
+
+ dev_kfree_skb_any (skb);
+ skb = skb_rndis;
+ rndis_add_hdr (skb);
+ length = skb->len;
+ }
+#endif
+ req->buf = skb->data;
+ req->context = skb;
+ req->complete = tx_complete;
+
+ /* use zlp framing on tx for strict CDC-Ether conformance,
+ * though any robust network rx path ignores extra padding.
+ * and some hardware doesn't like to write zlps.
+ */
+ req->zero = 1;
+ if (!dev->zlp && (length % dev->in_ep->maxpacket) == 0)
+ length++;
+
+ req->length = length;
+
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+ /* throttle highspeed IRQ rate back slightly */
+ req->no_interrupt = (dev->gadget->speed == USB_SPEED_HIGH)
+ ? ((atomic_read (&dev->tx_qlen) % TX_DELAY) != 0)
+ : 0;
+#endif
+
+ retval = usb_ep_queue (dev->in_ep, req, GFP_ATOMIC);
+ switch (retval) {
+ default:
+ DEBUG (dev, "tx queue err %d\n", retval);
+ break;
+ case 0:
+ net->trans_start = jiffies;
+ atomic_inc (&dev->tx_qlen);
+ }
+
+ if (retval) {
+#ifdef CONFIG_USB_ETH_RNDIS
+drop:
+#endif
+ dev->stats.tx_dropped++;
+ dev_kfree_skb_any (skb);
+ spin_lock_irqsave (&dev->lock, flags);
+ if (list_empty (&dev->tx_reqs))
+ netif_start_queue (net);
+ list_add (&req->list, &dev->tx_reqs);
+ spin_unlock_irqrestore (&dev->lock, flags);
+ }
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_USB_ETH_RNDIS
+
+static void rndis_send_media_state (struct eth_dev *dev, int connect)
+{
+ if (!dev)
+ return;
+
+ if (connect) {
+ if (rndis_signal_connect (dev->rndis_config))
+ return;
+ } else {
+ if (rndis_signal_disconnect (dev->rndis_config))
+ return;
+ }
+}
+
+static void
+rndis_control_ack_complete (struct usb_ep *ep, struct usb_request *req)
+{
+ if (req->status || req->actual != req->length)
+ DEBUG ((struct eth_dev *) ep->driver_data,
+ "rndis control ack complete --> %d, %d/%d\n",
+ req->status, req->actual, req->length);
+
+ usb_ep_free_buffer(ep, req->buf, req->dma, 8);
+ usb_ep_free_request(ep, req);
+}
+
+static int rndis_control_ack (struct net_device *net)
+{
+ struct eth_dev *dev = netdev_priv(net);
+ u32 length;
+ struct usb_request *resp;
+
+ /* in case RNDIS calls this after disconnect */
+ if (!dev->status_ep) {
+ DEBUG (dev, "status ENODEV\n");
+ return -ENODEV;
+ }
+
+ /* Allocate memory for notification ie. ACK */
+ resp = usb_ep_alloc_request (dev->status_ep, GFP_ATOMIC);
+ if (!resp) {
+ DEBUG (dev, "status ENOMEM\n");
+ return -ENOMEM;
+ }
+
+ resp->buf = usb_ep_alloc_buffer (dev->status_ep, 8,
+ &resp->dma, GFP_ATOMIC);
+ if (!resp->buf) {
+ DEBUG (dev, "status buf ENOMEM\n");
+ usb_ep_free_request (dev->status_ep, resp);
+ return -ENOMEM;
+ }
+
+ /* Send RNDIS RESPONSE_AVAILABLE notification;
+ * USB_CDC_NOTIFY_RESPONSE_AVAILABLE should work too
+ */
+ resp->length = 8;
+ resp->complete = rndis_control_ack_complete;
+
+ *((__le32 *) resp->buf) = __constant_cpu_to_le32 (1);
+ *((__le32 *) resp->buf + 1) = __constant_cpu_to_le32 (0);
+
+ length = usb_ep_queue (dev->status_ep, resp, GFP_ATOMIC);
+ if (length < 0) {
+ resp->status = 0;
+ rndis_control_ack_complete (dev->status_ep, resp);
+ }
+
+ return 0;
+}
+
+#endif /* RNDIS */
+
+static void eth_start (struct eth_dev *dev, int gfp_flags)
+{
+ DEBUG (dev, "%s\n", __FUNCTION__);
+
+ /* fill the rx queue */
+ rx_fill (dev, gfp_flags);
+
+ /* and open the tx floodgates */
+ atomic_set (&dev->tx_qlen, 0);
+ netif_wake_queue (dev->net);
+#ifdef CONFIG_USB_ETH_RNDIS
+ if (dev->rndis) {
+ rndis_set_param_medium (dev->rndis_config,
+ NDIS_MEDIUM_802_3,
+ BITRATE(dev->gadget));
+ rndis_send_media_state (dev, 1);
+ }
+#endif
+}
+
+static int eth_open (struct net_device *net)
+{
+ struct eth_dev *dev = netdev_priv(net);
+
+ DEBUG (dev, "%s\n", __FUNCTION__);
+ if (netif_carrier_ok (dev->net))
+ eth_start (dev, GFP_KERNEL);
+ return 0;
+}
+
+static int eth_stop (struct net_device *net)
+{
+ struct eth_dev *dev = netdev_priv(net);
+
+ VDEBUG (dev, "%s\n", __FUNCTION__);
+ netif_stop_queue (net);
+
+ DEBUG (dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld\n",
+ dev->stats.rx_packets, dev->stats.tx_packets,
+ dev->stats.rx_errors, dev->stats.tx_errors
+ );
+
+ /* ensure there are no more active requests */
+ if (dev->config) {
+ usb_ep_disable (dev->in_ep);
+ usb_ep_disable (dev->out_ep);
+ if (netif_carrier_ok (dev->net)) {
+ DEBUG (dev, "host still using in/out endpoints\n");
+ // FIXME idiom may leave toggle wrong here
+ usb_ep_enable (dev->in_ep, dev->in);
+ usb_ep_enable (dev->out_ep, dev->out);
+ }
+ if (dev->status_ep) {
+ usb_ep_disable (dev->status_ep);
+ usb_ep_enable (dev->status_ep, dev->status);
+ }
+ }
+
+#ifdef CONFIG_USB_ETH_RNDIS
+ if (dev->rndis) {
+ rndis_set_param_medium (dev->rndis_config,
+ NDIS_MEDIUM_802_3, 0);
+ rndis_send_media_state (dev, 0);
+ }
+#endif
+
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_request *eth_req_alloc (struct usb_ep *ep, unsigned size)
+{
+ struct usb_request *req;
+
+ req = usb_ep_alloc_request (ep, GFP_KERNEL);
+ if (!req)
+ return NULL;
+
+ req->buf = kmalloc (size, GFP_KERNEL);
+ if (!req->buf) {
+ usb_ep_free_request (ep, req);
+ req = NULL;
+ }
+ return req;
+}
+
+static void
+eth_req_free (struct usb_ep *ep, struct usb_request *req)
+{
+ kfree (req->buf);
+ usb_ep_free_request (ep, req);
+}
+
+
+static void
+eth_unbind (struct usb_gadget *gadget)
+{
+ struct eth_dev *dev = get_gadget_data (gadget);
+
+ DEBUG (dev, "unbind\n");
+#ifdef CONFIG_USB_ETH_RNDIS
+ rndis_deregister (dev->rndis_config);
+ rndis_exit ();
+#endif
+
+ /* we've already been disconnected ... no i/o is active */
+ if (dev->req) {
+ eth_req_free (gadget->ep0, dev->req);
+ dev->req = NULL;
+ }
+ if (dev->stat_req) {
+ eth_req_free (dev->status_ep, dev->stat_req);
+ dev->stat_req = NULL;
+ }
+
+ unregister_netdev (dev->net);
+ free_netdev(dev->net);
+
+ /* assuming we used keventd, it must quiesce too */
+ flush_scheduled_work ();
+ set_gadget_data (gadget, NULL);
+}
+
+static u8 __init nibble (unsigned char c)
+{
+ if (likely (isdigit (c)))
+ return c - '0';
+ c = toupper (c);
+ if (likely (isxdigit (c)))
+ return 10 + c - 'A';
+ return 0;
+}
+
+static void __init get_ether_addr (const char *str, u8 *dev_addr)
+{
+ if (str) {
+ unsigned i;
+
+ for (i = 0; i < 6; i++) {
+ unsigned char num;
+
+ if((*str == '.') || (*str == ':'))
+ str++;
+ num = nibble(*str++) << 4;
+ num |= (nibble(*str++));
+ dev_addr [i] = num;
+ }
+ if (is_valid_ether_addr (dev_addr))
+ return;
+ }
+ random_ether_addr(dev_addr);
+}
+
+static int __init
+eth_bind (struct usb_gadget *gadget)
+{
+ struct eth_dev *dev;
+ struct net_device *net;
+ u8 cdc = 1, zlp = 1, rndis = 1;
+ struct usb_ep *in_ep, *out_ep, *status_ep = NULL;
+ int status = -ENOMEM;
+
+ /* these flags are only ever cleared; compiler take note */
+#ifndef DEV_CONFIG_CDC
+ cdc = 0;
+#endif
+#ifndef CONFIG_USB_ETH_RNDIS
+ rndis = 0;
+#endif
+
+ /* Because most host side USB stacks handle CDC Ethernet, that
+ * standard protocol is _strongly_ preferred for interop purposes.
+ * (By everyone except Microsoft.)
+ */
+ if (gadget_is_net2280 (gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0201);
+ } else if (gadget_is_dummy (gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0202);
+ } else if (gadget_is_pxa (gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0203);
+ /* pxa doesn't support altsettings */
+ cdc = 0;
+ } else if (gadget_is_sh(gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0204);
+ /* sh doesn't support multiple interfaces or configs */
+ cdc = 0;
+ rndis = 0;
+ } else if (gadget_is_sa1100 (gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0205);
+ /* hardware can't write zlps */
+ zlp = 0;
+ /* sa1100 CAN do CDC, without status endpoint ... we use
+ * non-CDC to be compatible with ARM Linux-2.4 "usb-eth".
+ */
+ cdc = 0;
+ } else if (gadget_is_goku (gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0206);
+ } else if (gadget_is_mq11xx (gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0207);
+ } else if (gadget_is_omap (gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0208);
+ } else if (gadget_is_lh7a40x(gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0209);
+ } else if (gadget_is_n9604(gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0210);
+ } else if (gadget_is_pxa27x(gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0211);
+ } else if (gadget_is_s3c2410(gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0212);
+ } else if (gadget_is_at91(gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0213);
+ } else {
+ /* can't assume CDC works. don't want to default to
+ * anything less functional on CDC-capable hardware,
+ * so we fail in this case.
+ */
+ dev_err (&gadget->dev,
+ "controller '%s' not recognized\n",
+ gadget->name);
+ return -ENODEV;
+ }
+ snprintf (manufacturer, sizeof manufacturer, "%s %s/%s",
+ system_utsname.sysname, system_utsname.release,
+ gadget->name);
+
+ /* If there's an RNDIS configuration, that's what Windows wants to
+ * be using ... so use these product IDs here and in the "linux.inf"
+ * needed to install MSFT drivers. Current Linux kernels will use
+ * the second configuration if it's CDC Ethernet, and need some help
+ * to choose the right configuration otherwise.
+ */
+ if (rndis) {
+ device_desc.idVendor =
+ __constant_cpu_to_le16(RNDIS_VENDOR_NUM);
+ device_desc.idProduct =
+ __constant_cpu_to_le16(RNDIS_PRODUCT_NUM);
+ snprintf (product_desc, sizeof product_desc,
+ "RNDIS/%s", driver_desc);
+
+ /* CDC subset ... recognized by Linux since 2.4.10, but Windows
+ * drivers aren't widely available.
+ */
+ } else if (!cdc) {
+ device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC;
+ device_desc.idVendor =
+ __constant_cpu_to_le16(SIMPLE_VENDOR_NUM);
+ device_desc.idProduct =
+ __constant_cpu_to_le16(SIMPLE_PRODUCT_NUM);
+ }
+
+ /* support optional vendor/distro customization */
+ if (idVendor) {
+ if (!idProduct) {
+ dev_err (&gadget->dev, "idVendor needs idProduct!\n");
+ return -ENODEV;
+ }
+ device_desc.idVendor = cpu_to_le16(idVendor);
+ device_desc.idProduct = cpu_to_le16(idProduct);
+ if (bcdDevice)
+ device_desc.bcdDevice = cpu_to_le16(bcdDevice);
+ }
+ if (iManufacturer)
+ strlcpy (manufacturer, iManufacturer, sizeof manufacturer);
+ if (iProduct)
+ strlcpy (product_desc, iProduct, sizeof product_desc);
+
+ /* all we really need is bulk IN/OUT */
+ usb_ep_autoconfig_reset (gadget);
+ in_ep = usb_ep_autoconfig (gadget, &fs_source_desc);
+ if (!in_ep) {
+autoconf_fail:
+ dev_err (&gadget->dev,
+ "can't autoconfigure on %s\n",
+ gadget->name);
+ return -ENODEV;
+ }
+ EP_IN_NAME = in_ep->name;
+ in_ep->driver_data = in_ep; /* claim */
+
+ out_ep = usb_ep_autoconfig (gadget, &fs_sink_desc);
+ if (!out_ep)
+ goto autoconf_fail;
+ EP_OUT_NAME = out_ep->name;
+ out_ep->driver_data = out_ep; /* claim */
+
+#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
+ /* CDC Ethernet control interface doesn't require a status endpoint.
+ * Since some hosts expect one, try to allocate one anyway.
+ */
+ if (cdc || rndis) {
+ status_ep = usb_ep_autoconfig (gadget, &fs_status_desc);
+ if (status_ep) {
+ EP_STATUS_NAME = status_ep->name;
+ status_ep->driver_data = status_ep; /* claim */
+ } else if (rndis) {
+ dev_err (&gadget->dev,
+ "can't run RNDIS on %s\n",
+ gadget->name);
+ return -ENODEV;
+#ifdef DEV_CONFIG_CDC
+ /* pxa25x only does CDC subset; often used with RNDIS */
+ } else if (cdc) {
+ control_intf.bNumEndpoints = 0;
+ /* FIXME remove endpoint from descriptor list */
+#endif
+ }
+ }
+#endif
+
+ /* one config: cdc, else minimal subset */
+ if (!cdc) {
+ eth_config.bNumInterfaces = 1;
+ eth_config.iConfiguration = STRING_SUBSET;
+ fs_subset_descriptors();
+ hs_subset_descriptors();
+ }
+
+ /* For now RNDIS is always a second config */
+ if (rndis)
+ device_desc.bNumConfigurations = 2;
+
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+ if (rndis)
+ dev_qualifier.bNumConfigurations = 2;
+ else if (!cdc)
+ dev_qualifier.bDeviceClass = USB_CLASS_VENDOR_SPEC;
+
+ /* assumes ep0 uses the same value for both speeds ... */
+ dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0;
+
+ /* and that all endpoints are dual-speed */
+ hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress;
+ hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress;
+#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
+ if (EP_STATUS_NAME)
+ hs_status_desc.bEndpointAddress =
+ fs_status_desc.bEndpointAddress;
+#endif
+#endif /* DUALSPEED */
+
+ device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
+ usb_gadget_set_selfpowered (gadget);
+
+ if (gadget->is_otg) {
+ otg_descriptor.bmAttributes |= USB_OTG_HNP,
+ eth_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ eth_config.bMaxPower = 4;
+#ifdef CONFIG_USB_ETH_RNDIS
+ rndis_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ rndis_config.bMaxPower = 4;
+#endif
+ }
+
+ net = alloc_etherdev (sizeof *dev);
+ if (!net)
+ return status;
+ dev = netdev_priv(net);
+ spin_lock_init (&dev->lock);
+ INIT_WORK (&dev->work, eth_work, dev);
+ INIT_LIST_HEAD (&dev->tx_reqs);
+ INIT_LIST_HEAD (&dev->rx_reqs);
+
+ /* network device setup */
+ dev->net = net;
+ SET_MODULE_OWNER (net);
+ strcpy (net->name, "usb%d");
+ dev->cdc = cdc;
+ dev->zlp = zlp;
+
+ dev->in_ep = in_ep;
+ dev->out_ep = out_ep;
+ dev->status_ep = status_ep;
+
+ /* Module params for these addresses should come from ID proms.
+ * The host side address is used with CDC and RNDIS, and commonly
+ * ends up in a persistent config database.
+ */
+ get_ether_addr(dev_addr, net->dev_addr);
+ if (cdc || rndis) {
+ get_ether_addr(host_addr, dev->host_mac);
+#ifdef DEV_CONFIG_CDC
+ snprintf (ethaddr, sizeof ethaddr, "%02X%02X%02X%02X%02X%02X",
+ dev->host_mac [0], dev->host_mac [1],
+ dev->host_mac [2], dev->host_mac [3],
+ dev->host_mac [4], dev->host_mac [5]);
+#endif
+ }
+
+ if (rndis) {
+ status = rndis_init();
+ if (status < 0) {
+ dev_err (&gadget->dev, "can't init RNDIS, %d\n",
+ status);
+ goto fail;
+ }
+ }
+
+ net->change_mtu = eth_change_mtu;
+ net->get_stats = eth_get_stats;
+ net->hard_start_xmit = eth_start_xmit;
+ net->open = eth_open;
+ net->stop = eth_stop;
+ // watchdog_timeo, tx_timeout ...
+ // set_multicast_list
+ SET_ETHTOOL_OPS(net, &ops);
+
+ /* preallocate control message data and buffer */
+ dev->req = eth_req_alloc (gadget->ep0, USB_BUFSIZ);
+ if (!dev->req)
+ goto fail;
+ dev->req->complete = eth_setup_complete;
+
+ /* ... and maybe likewise for status transfer */
+ if (dev->status_ep) {
+ dev->stat_req = eth_req_alloc (dev->status_ep,
+ STATUS_BYTECOUNT);
+ if (!dev->stat_req) {
+ eth_req_free (gadget->ep0, dev->req);
+ goto fail;
+ }
+ }
+
+ /* finish hookup to lower layer ... */
+ dev->gadget = gadget;
+ set_gadget_data (gadget, dev);
+ gadget->ep0->driver_data = dev;
+
+ /* two kinds of host-initiated state changes:
+ * - iff DATA transfer is active, carrier is "on"
+ * - tx queueing enabled if open *and* carrier is "on"
+ */
+ netif_stop_queue (dev->net);
+ netif_carrier_off (dev->net);
+
+ // SET_NETDEV_DEV (dev->net, &gadget->dev);
+ status = register_netdev (dev->net);
+ if (status < 0)
+ goto fail1;
+
+ INFO (dev, "%s, version: " DRIVER_VERSION "\n", driver_desc);
+ INFO (dev, "using %s, OUT %s IN %s%s%s\n", gadget->name,
+ EP_OUT_NAME, EP_IN_NAME,
+ EP_STATUS_NAME ? " STATUS " : "",
+ EP_STATUS_NAME ? EP_STATUS_NAME : ""
+ );
+ INFO (dev, "MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
+ net->dev_addr [0], net->dev_addr [1],
+ net->dev_addr [2], net->dev_addr [3],
+ net->dev_addr [4], net->dev_addr [5]);
+
+ if (cdc || rndis)
+ INFO (dev, "HOST MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
+ dev->host_mac [0], dev->host_mac [1],
+ dev->host_mac [2], dev->host_mac [3],
+ dev->host_mac [4], dev->host_mac [5]);
+
+#ifdef CONFIG_USB_ETH_RNDIS
+ if (rndis) {
+ u32 vendorID = 0;
+
+ /* FIXME RNDIS vendor id == "vendor NIC code" == ? */
+
+ dev->rndis_config = rndis_register (rndis_control_ack);
+ if (dev->rndis_config < 0) {
+fail0:
+ unregister_netdev (dev->net);
+ status = -ENODEV;
+ goto fail;
+ }
+
+ /* these set up a lot of the OIDs that RNDIS needs */
+ rndis_set_host_mac (dev->rndis_config, dev->host_mac);
+ if (rndis_set_param_dev (dev->rndis_config, dev->net,
+ &dev->stats))
+ goto fail0;
+ if (rndis_set_param_vendor (dev->rndis_config, vendorID,
+ manufacturer))
+ goto fail0;
+ if (rndis_set_param_medium (dev->rndis_config,
+ NDIS_MEDIUM_802_3,
+ 0))
+ goto fail0;
+ INFO (dev, "RNDIS ready\n");
+ }
+#endif
+
+ return status;
+
+fail1:
+ dev_dbg(&gadget->dev, "register_netdev failed, %d\n", status);
+fail:
+ eth_unbind (gadget);
+ return status;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void
+eth_suspend (struct usb_gadget *gadget)
+{
+ struct eth_dev *dev = get_gadget_data (gadget);
+
+ DEBUG (dev, "suspend\n");
+ dev->suspended = 1;
+}
+
+static void
+eth_resume (struct usb_gadget *gadget)
+{
+ struct eth_dev *dev = get_gadget_data (gadget);
+
+ DEBUG (dev, "resume\n");
+ dev->suspended = 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_gadget_driver eth_driver = {
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+ .speed = USB_SPEED_HIGH,
+#else
+ .speed = USB_SPEED_FULL,
+#endif
+ .function = (char *) driver_desc,
+ .bind = eth_bind,
+ .unbind = eth_unbind,
+
+ .setup = eth_setup,
+ .disconnect = eth_disconnect,
+
+ .suspend = eth_suspend,
+ .resume = eth_resume,
+
+ .driver = {
+ .name = (char *) shortname,
+ // .shutdown = ...
+ // .suspend = ...
+ // .resume = ...
+ },
+};
+
+MODULE_DESCRIPTION (DRIVER_DESC);
+MODULE_AUTHOR ("David Brownell, Benedikt Spanger");
+MODULE_LICENSE ("GPL");
+
+
+static int __init init (void)
+{
+ return usb_gadget_register_driver (&eth_driver);
+}
+module_init (init);
+
+static void __exit cleanup (void)
+{
+ usb_gadget_unregister_driver (&eth_driver);
+}
+module_exit (cleanup);
+
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
new file mode 100644
index 00000000000..4857f0e4ef4
--- /dev/null
+++ b/drivers/usb/gadget/file_storage.c
@@ -0,0 +1,4139 @@
+/*
+ * file_storage.c -- File-backed USB Storage Gadget, for USB development
+ *
+ * Copyright (C) 2003-2005 Alan Stern
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ * to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+/*
+ * The File-backed Storage Gadget acts as a USB Mass Storage device,
+ * appearing to the host as a disk drive. In addition to providing an
+ * example of a genuinely useful gadget driver for a USB device, it also
+ * illustrates a technique of double-buffering for increased throughput.
+ * Last but not least, it gives an easy way to probe the behavior of the
+ * Mass Storage drivers in a USB host.
+ *
+ * Backing storage is provided by a regular file or a block device, specified
+ * by the "file" module parameter. Access can be limited to read-only by
+ * setting the optional "ro" module parameter. The gadget will indicate that
+ * it has removable media if the optional "removable" module parameter is set.
+ *
+ * The gadget supports the Control-Bulk (CB), Control-Bulk-Interrupt (CBI),
+ * and Bulk-Only (also known as Bulk-Bulk-Bulk or BBB) transports, selected
+ * by the optional "transport" module parameter. It also supports the
+ * following protocols: RBC (0x01), ATAPI or SFF-8020i (0x02), QIC-157 (0c03),
+ * UFI (0x04), SFF-8070i (0x05), and transparent SCSI (0x06), selected by
+ * the optional "protocol" module parameter. In addition, the default
+ * Vendor ID, Product ID, and release number can be overridden.
+ *
+ * There is support for multiple logical units (LUNs), each of which has
+ * its own backing file. The number of LUNs can be set using the optional
+ * "luns" module parameter (anywhere from 1 to 8), and the corresponding
+ * files are specified using comma-separated lists for "file" and "ro".
+ * The default number of LUNs is taken from the number of "file" elements;
+ * it is 1 if "file" is not given. If "removable" is not set then a backing
+ * file must be specified for each LUN. If it is set, then an unspecified
+ * or empty backing filename means the LUN's medium is not loaded.
+ *
+ * Requirements are modest; only a bulk-in and a bulk-out endpoint are
+ * needed (an interrupt-out endpoint is also needed for CBI). The memory
+ * requirement amounts to two 16K buffers, size configurable by a parameter.
+ * Support is included for both full-speed and high-speed operation.
+ *
+ * Module options:
+ *
+ * file=filename[,filename...]
+ * Required if "removable" is not set, names of
+ * the files or block devices used for
+ * backing storage
+ * ro=b[,b...] Default false, booleans for read-only access
+ * removable Default false, boolean for removable media
+ * luns=N Default N = number of filenames, number of
+ * LUNs to support
+ * transport=XXX Default BBB, transport name (CB, CBI, or BBB)
+ * protocol=YYY Default SCSI, protocol name (RBC, 8020 or
+ * ATAPI, QIC, UFI, 8070, or SCSI;
+ * also 1 - 6)
+ * vendor=0xVVVV Default 0x0525 (NetChip), USB Vendor ID
+ * product=0xPPPP Default 0xa4a5 (FSG), USB Product ID
+ * release=0xRRRR Override the USB release number (bcdDevice)
+ * buflen=N Default N=16384, buffer size used (will be
+ * rounded down to a multiple of
+ * PAGE_CACHE_SIZE)
+ * stall Default determined according to the type of
+ * USB device controller (usually true),
+ * boolean to permit the driver to halt
+ * bulk endpoints
+ *
+ * If CONFIG_USB_FILE_STORAGE_TEST is not set, only the "file", "ro",
+ * "removable", and "luns" options are available; default values are used
+ * for everything else.
+ *
+ * The pathnames of the backing files and the ro settings are available in
+ * the attribute files "file" and "ro" in the lun<n> subdirectory of the
+ * gadget's sysfs directory. If the "removable" option is set, writing to
+ * these files will simulate ejecting/loading the medium (writing an empty
+ * line means eject) and adjusting a write-enable tab. Changes to the ro
+ * setting are not allowed when the medium is loaded.
+ *
+ * This gadget driver is heavily based on "Gadget Zero" by David Brownell.
+ */
+
+
+/*
+ * Driver Design
+ *
+ * The FSG driver is fairly straightforward. There is a main kernel
+ * thread that handles most of the work. Interrupt routines field
+ * callbacks from the controller driver: bulk- and interrupt-request
+ * completion notifications, endpoint-0 events, and disconnect events.
+ * Completion events are passed to the main thread by wakeup calls. Many
+ * ep0 requests are handled at interrupt time, but SetInterface,
+ * SetConfiguration, and device reset requests are forwarded to the
+ * thread in the form of "exceptions" using SIGUSR1 signals (since they
+ * should interrupt any ongoing file I/O operations).
+ *
+ * The thread's main routine implements the standard command/data/status
+ * parts of a SCSI interaction. It and its subroutines are full of tests
+ * for pending signals/exceptions -- all this polling is necessary since
+ * the kernel has no setjmp/longjmp equivalents. (Maybe this is an
+ * indication that the driver really wants to be running in userspace.)
+ * An important point is that so long as the thread is alive it keeps an
+ * open reference to the backing file. This will prevent unmounting
+ * the backing file's underlying filesystem and could cause problems
+ * during system shutdown, for example. To prevent such problems, the
+ * thread catches INT, TERM, and KILL signals and converts them into
+ * an EXIT exception.
+ *
+ * In normal operation the main thread is started during the gadget's
+ * fsg_bind() callback and stopped during fsg_unbind(). But it can also
+ * exit when it receives a signal, and there's no point leaving the
+ * gadget running when the thread is dead. So just before the thread
+ * exits, it deregisters the gadget driver. This makes things a little
+ * tricky: The driver is deregistered at two places, and the exiting
+ * thread can indirectly call fsg_unbind() which in turn can tell the
+ * thread to exit. The first problem is resolved through the use of the
+ * REGISTERED atomic bitflag; the driver will only be deregistered once.
+ * The second problem is resolved by having fsg_unbind() check
+ * fsg->state; it won't try to stop the thread if the state is already
+ * FSG_STATE_TERMINATED.
+ *
+ * To provide maximum throughput, the driver uses a circular pipeline of
+ * buffer heads (struct fsg_buffhd). In principle the pipeline can be
+ * arbitrarily long; in practice the benefits don't justify having more
+ * than 2 stages (i.e., double buffering). But it helps to think of the
+ * pipeline as being a long one. Each buffer head contains a bulk-in and
+ * a bulk-out request pointer (since the buffer can be used for both
+ * output and input -- directions always are given from the host's
+ * point of view) as well as a pointer to the buffer and various state
+ * variables.
+ *
+ * Use of the pipeline follows a simple protocol. There is a variable
+ * (fsg->next_buffhd_to_fill) that points to the next buffer head to use.
+ * At any time that buffer head may still be in use from an earlier
+ * request, so each buffer head has a state variable indicating whether
+ * it is EMPTY, FULL, or BUSY. Typical use involves waiting for the
+ * buffer head to be EMPTY, filling the buffer either by file I/O or by
+ * USB I/O (during which the buffer head is BUSY), and marking the buffer
+ * head FULL when the I/O is complete. Then the buffer will be emptied
+ * (again possibly by USB I/O, during which it is marked BUSY) and
+ * finally marked EMPTY again (possibly by a completion routine).
+ *
+ * A module parameter tells the driver to avoid stalling the bulk
+ * endpoints wherever the transport specification allows. This is
+ * necessary for some UDCs like the SuperH, which cannot reliably clear a
+ * halt on a bulk endpoint. However, under certain circumstances the
+ * Bulk-only specification requires a stall. In such cases the driver
+ * will halt the endpoint and set a flag indicating that it should clear
+ * the halt in software during the next device reset. Hopefully this
+ * will permit everything to work correctly. Furthermore, although the
+ * specification allows the bulk-out endpoint to halt when the host sends
+ * too much data, implementing this would cause an unavoidable race.
+ * The driver will always use the "no-stall" approach for OUT transfers.
+ *
+ * One subtle point concerns sending status-stage responses for ep0
+ * requests. Some of these requests, such as device reset, can involve
+ * interrupting an ongoing file I/O operation, which might take an
+ * arbitrarily long time. During that delay the host might give up on
+ * the original ep0 request and issue a new one. When that happens the
+ * driver should not notify the host about completion of the original
+ * request, as the host will no longer be waiting for it. So the driver
+ * assigns to each ep0 request a unique tag, and it keeps track of the
+ * tag value of the request associated with a long-running exception
+ * (device-reset, interface-change, or configuration-change). When the
+ * exception handler is finished, the status-stage response is submitted
+ * only if the current ep0 request tag is equal to the exception request
+ * tag. Thus only the most recently received ep0 request will get a
+ * status-stage response.
+ *
+ * Warning: This driver source file is too long. It ought to be split up
+ * into a header file plus about 3 separate .c files, to handle the details
+ * of the Gadget, USB Mass Storage, and SCSI protocols.
+ */
+
+
+#undef DEBUG
+#undef VERBOSE
+#undef DUMP_MSGS
+
+#include <linux/config.h>
+
+#include <asm/system.h>
+#include <asm/uaccess.h>
+
+#include <linux/bitops.h>
+#include <linux/blkdev.h>
+#include <linux/compiler.h>
+#include <linux/completion.h>
+#include <linux/dcache.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/fcntl.h>
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/limits.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/pagemap.h>
+#include <linux/rwsem.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/suspend.h>
+#include <linux/utsname.h>
+#include <linux/wait.h>
+
+#include <linux/usb_ch9.h>
+#include <linux/usb_gadget.h>
+
+#include "gadget_chips.h"
+
+
+/*-------------------------------------------------------------------------*/
+
+#define DRIVER_DESC "File-backed Storage Gadget"
+#define DRIVER_NAME "g_file_storage"
+#define DRIVER_VERSION "20 October 2004"
+
+static const char longname[] = DRIVER_DESC;
+static const char shortname[] = DRIVER_NAME;
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Alan Stern");
+MODULE_LICENSE("Dual BSD/GPL");
+
+/* Thanks to NetChip Technologies for donating this product ID.
+ *
+ * DO NOT REUSE THESE IDs with any other driver!! Ever!!
+ * Instead: allocate your own, using normal USB-IF procedures. */
+#define DRIVER_VENDOR_ID 0x0525 // NetChip
+#define DRIVER_PRODUCT_ID 0xa4a5 // Linux-USB File-backed Storage Gadget
+
+
+/*
+ * This driver assumes self-powered hardware and has no way for users to
+ * trigger remote wakeup. It uses autoconfiguration to select endpoints
+ * and endpoint addresses.
+ */
+
+
+/*-------------------------------------------------------------------------*/
+
+#define xprintk(f,level,fmt,args...) \
+ dev_printk(level , &(f)->gadget->dev , fmt , ## args)
+#define yprintk(l,level,fmt,args...) \
+ dev_printk(level , &(l)->dev , fmt , ## args)
+
+#ifdef DEBUG
+#define DBG(fsg,fmt,args...) \
+ xprintk(fsg , KERN_DEBUG , fmt , ## args)
+#define LDBG(lun,fmt,args...) \
+ yprintk(lun , KERN_DEBUG , fmt , ## args)
+#define MDBG(fmt,args...) \
+ printk(KERN_DEBUG DRIVER_NAME ": " fmt , ## args)
+#else
+#define DBG(fsg,fmt,args...) \
+ do { } while (0)
+#define LDBG(lun,fmt,args...) \
+ do { } while (0)
+#define MDBG(fmt,args...) \
+ do { } while (0)
+#undef VERBOSE
+#undef DUMP_MSGS
+#endif /* DEBUG */
+
+#ifdef VERBOSE
+#define VDBG DBG
+#define VLDBG LDBG
+#else
+#define VDBG(fsg,fmt,args...) \
+ do { } while (0)
+#define VLDBG(lun,fmt,args...) \
+ do { } while (0)
+#endif /* VERBOSE */
+
+#define ERROR(fsg,fmt,args...) \
+ xprintk(fsg , KERN_ERR , fmt , ## args)
+#define LERROR(lun,fmt,args...) \
+ yprintk(lun , KERN_ERR , fmt , ## args)
+
+#define WARN(fsg,fmt,args...) \
+ xprintk(fsg , KERN_WARNING , fmt , ## args)
+#define LWARN(lun,fmt,args...) \
+ yprintk(lun , KERN_WARNING , fmt , ## args)
+
+#define INFO(fsg,fmt,args...) \
+ xprintk(fsg , KERN_INFO , fmt , ## args)
+#define LINFO(lun,fmt,args...) \
+ yprintk(lun , KERN_INFO , fmt , ## args)
+
+#define MINFO(fmt,args...) \
+ printk(KERN_INFO DRIVER_NAME ": " fmt , ## args)
+
+
+/*-------------------------------------------------------------------------*/
+
+/* Encapsulate the module parameter settings */
+
+#define MAX_LUNS 8
+
+ /* Arggh! There should be a module_param_array_named macro! */
+static char *file[MAX_LUNS] = {NULL, };
+static int ro[MAX_LUNS] = {0, };
+
+static struct {
+ int num_filenames;
+ int num_ros;
+ unsigned int nluns;
+
+ char *transport_parm;
+ char *protocol_parm;
+ int removable;
+ unsigned short vendor;
+ unsigned short product;
+ unsigned short release;
+ unsigned int buflen;
+ int can_stall;
+
+ int transport_type;
+ char *transport_name;
+ int protocol_type;
+ char *protocol_name;
+
+} mod_data = { // Default values
+ .transport_parm = "BBB",
+ .protocol_parm = "SCSI",
+ .removable = 0,
+ .vendor = DRIVER_VENDOR_ID,
+ .product = DRIVER_PRODUCT_ID,
+ .release = 0xffff, // Use controller chip type
+ .buflen = 16384,
+ .can_stall = 1,
+ };
+
+
+module_param_array(file, charp, &mod_data.num_filenames, S_IRUGO);
+MODULE_PARM_DESC(file, "names of backing files or devices");
+
+module_param_array(ro, bool, &mod_data.num_ros, S_IRUGO);
+MODULE_PARM_DESC(ro, "true to force read-only");
+
+module_param_named(luns, mod_data.nluns, uint, S_IRUGO);
+MODULE_PARM_DESC(luns, "number of LUNs");
+
+module_param_named(removable, mod_data.removable, bool, S_IRUGO);
+MODULE_PARM_DESC(removable, "true to simulate removable media");
+
+
+/* In the non-TEST version, only the module parameters listed above
+ * are available. */
+#ifdef CONFIG_USB_FILE_STORAGE_TEST
+
+module_param_named(transport, mod_data.transport_parm, charp, S_IRUGO);
+MODULE_PARM_DESC(transport, "type of transport (BBB, CBI, or CB)");
+
+module_param_named(protocol, mod_data.protocol_parm, charp, S_IRUGO);
+MODULE_PARM_DESC(protocol, "type of protocol (RBC, 8020, QIC, UFI, "
+ "8070, or SCSI)");
+
+module_param_named(vendor, mod_data.vendor, ushort, S_IRUGO);
+MODULE_PARM_DESC(vendor, "USB Vendor ID");
+
+module_param_named(product, mod_data.product, ushort, S_IRUGO);
+MODULE_PARM_DESC(product, "USB Product ID");
+
+module_param_named(release, mod_data.release, ushort, S_IRUGO);
+MODULE_PARM_DESC(release, "USB release number");
+
+module_param_named(buflen, mod_data.buflen, uint, S_IRUGO);
+MODULE_PARM_DESC(buflen, "I/O buffer size");
+
+module_param_named(stall, mod_data.can_stall, bool, S_IRUGO);
+MODULE_PARM_DESC(stall, "false to prevent bulk stalls");
+
+#endif /* CONFIG_USB_FILE_STORAGE_TEST */
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB protocol value = the transport method */
+#define USB_PR_CBI 0x00 // Control/Bulk/Interrupt
+#define USB_PR_CB 0x01 // Control/Bulk w/o interrupt
+#define USB_PR_BULK 0x50 // Bulk-only
+
+/* USB subclass value = the protocol encapsulation */
+#define USB_SC_RBC 0x01 // Reduced Block Commands (flash)
+#define USB_SC_8020 0x02 // SFF-8020i, MMC-2, ATAPI (CD-ROM)
+#define USB_SC_QIC 0x03 // QIC-157 (tape)
+#define USB_SC_UFI 0x04 // UFI (floppy)
+#define USB_SC_8070 0x05 // SFF-8070i (removable)
+#define USB_SC_SCSI 0x06 // Transparent SCSI
+
+/* Bulk-only data structures */
+
+/* Command Block Wrapper */
+struct bulk_cb_wrap {
+ __le32 Signature; // Contains 'USBC'
+ u32 Tag; // Unique per command id
+ __le32 DataTransferLength; // Size of the data
+ u8 Flags; // Direction in bit 7
+ u8 Lun; // LUN (normally 0)
+ u8 Length; // Of the CDB, <= MAX_COMMAND_SIZE
+ u8 CDB[16]; // Command Data Block
+};
+
+#define USB_BULK_CB_WRAP_LEN 31
+#define USB_BULK_CB_SIG 0x43425355 // Spells out USBC
+#define USB_BULK_IN_FLAG 0x80
+
+/* Command Status Wrapper */
+struct bulk_cs_wrap {
+ __le32 Signature; // Should = 'USBS'
+ u32 Tag; // Same as original command
+ __le32 Residue; // Amount not transferred
+ u8 Status; // See below
+};
+
+#define USB_BULK_CS_WRAP_LEN 13
+#define USB_BULK_CS_SIG 0x53425355 // Spells out 'USBS'
+#define USB_STATUS_PASS 0
+#define USB_STATUS_FAIL 1
+#define USB_STATUS_PHASE_ERROR 2
+
+/* Bulk-only class specific requests */
+#define USB_BULK_RESET_REQUEST 0xff
+#define USB_BULK_GET_MAX_LUN_REQUEST 0xfe
+
+
+/* CBI Interrupt data structure */
+struct interrupt_data {
+ u8 bType;
+ u8 bValue;
+};
+
+#define CBI_INTERRUPT_DATA_LEN 2
+
+/* CBI Accept Device-Specific Command request */
+#define USB_CBI_ADSC_REQUEST 0x00
+
+
+#define MAX_COMMAND_SIZE 16 // Length of a SCSI Command Data Block
+
+/* SCSI commands that we recognize */
+#define SC_FORMAT_UNIT 0x04
+#define SC_INQUIRY 0x12
+#define SC_MODE_SELECT_6 0x15
+#define SC_MODE_SELECT_10 0x55
+#define SC_MODE_SENSE_6 0x1a
+#define SC_MODE_SENSE_10 0x5a
+#define SC_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e
+#define SC_READ_6 0x08
+#define SC_READ_10 0x28
+#define SC_READ_12 0xa8
+#define SC_READ_CAPACITY 0x25
+#define SC_READ_FORMAT_CAPACITIES 0x23
+#define SC_RELEASE 0x17
+#define SC_REQUEST_SENSE 0x03
+#define SC_RESERVE 0x16
+#define SC_SEND_DIAGNOSTIC 0x1d
+#define SC_START_STOP_UNIT 0x1b
+#define SC_SYNCHRONIZE_CACHE 0x35
+#define SC_TEST_UNIT_READY 0x00
+#define SC_VERIFY 0x2f
+#define SC_WRITE_6 0x0a
+#define SC_WRITE_10 0x2a
+#define SC_WRITE_12 0xaa
+
+/* SCSI Sense Key/Additional Sense Code/ASC Qualifier values */
+#define SS_NO_SENSE 0
+#define SS_COMMUNICATION_FAILURE 0x040800
+#define SS_INVALID_COMMAND 0x052000
+#define SS_INVALID_FIELD_IN_CDB 0x052400
+#define SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE 0x052100
+#define SS_LOGICAL_UNIT_NOT_SUPPORTED 0x052500
+#define SS_MEDIUM_NOT_PRESENT 0x023a00
+#define SS_MEDIUM_REMOVAL_PREVENTED 0x055302
+#define SS_NOT_READY_TO_READY_TRANSITION 0x062800
+#define SS_RESET_OCCURRED 0x062900
+#define SS_SAVING_PARAMETERS_NOT_SUPPORTED 0x053900
+#define SS_UNRECOVERED_READ_ERROR 0x031100
+#define SS_WRITE_ERROR 0x030c02
+#define SS_WRITE_PROTECTED 0x072700
+
+#define SK(x) ((u8) ((x) >> 16)) // Sense Key byte, etc.
+#define ASC(x) ((u8) ((x) >> 8))
+#define ASCQ(x) ((u8) (x))
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * These definitions will permit the compiler to avoid generating code for
+ * parts of the driver that aren't used in the non-TEST version. Even gcc
+ * can recognize when a test of a constant expression yields a dead code
+ * path.
+ */
+
+#ifdef CONFIG_USB_FILE_STORAGE_TEST
+
+#define transport_is_bbb() (mod_data.transport_type == USB_PR_BULK)
+#define transport_is_cbi() (mod_data.transport_type == USB_PR_CBI)
+#define protocol_is_scsi() (mod_data.protocol_type == USB_SC_SCSI)
+
+#else
+
+#define transport_is_bbb() 1
+#define transport_is_cbi() 0
+#define protocol_is_scsi() 1
+
+#endif /* CONFIG_USB_FILE_STORAGE_TEST */
+
+
+struct lun {
+ struct file *filp;
+ loff_t file_length;
+ loff_t num_sectors;
+
+ unsigned int ro : 1;
+ unsigned int prevent_medium_removal : 1;
+ unsigned int registered : 1;
+
+ u32 sense_data;
+ u32 sense_data_info;
+ u32 unit_attention_data;
+
+ struct device dev;
+};
+
+#define backing_file_is_open(curlun) ((curlun)->filp != NULL)
+
+static inline struct lun *dev_to_lun(struct device *dev)
+{
+ return container_of(dev, struct lun, dev);
+}
+
+
+/* Big enough to hold our biggest descriptor */
+#define EP0_BUFSIZE 256
+#define DELAYED_STATUS (EP0_BUFSIZE + 999) // An impossibly large value
+
+/* Number of buffers we will use. 2 is enough for double-buffering */
+#define NUM_BUFFERS 2
+
+enum fsg_buffer_state {
+ BUF_STATE_EMPTY = 0,
+ BUF_STATE_FULL,
+ BUF_STATE_BUSY
+};
+
+struct fsg_buffhd {
+ void *buf;
+ dma_addr_t dma;
+ volatile enum fsg_buffer_state state;
+ struct fsg_buffhd *next;
+
+ /* The NetChip 2280 is faster, and handles some protocol faults
+ * better, if we don't submit any short bulk-out read requests.
+ * So we will record the intended request length here. */
+ unsigned int bulk_out_intended_length;
+
+ struct usb_request *inreq;
+ volatile int inreq_busy;
+ struct usb_request *outreq;
+ volatile int outreq_busy;
+};
+
+enum fsg_state {
+ FSG_STATE_COMMAND_PHASE = -10, // This one isn't used anywhere
+ FSG_STATE_DATA_PHASE,
+ FSG_STATE_STATUS_PHASE,
+
+ FSG_STATE_IDLE = 0,
+ FSG_STATE_ABORT_BULK_OUT,
+ FSG_STATE_RESET,
+ FSG_STATE_INTERFACE_CHANGE,
+ FSG_STATE_CONFIG_CHANGE,
+ FSG_STATE_DISCONNECT,
+ FSG_STATE_EXIT,
+ FSG_STATE_TERMINATED
+};
+
+enum data_direction {
+ DATA_DIR_UNKNOWN = 0,
+ DATA_DIR_FROM_HOST,
+ DATA_DIR_TO_HOST,
+ DATA_DIR_NONE
+};
+
+struct fsg_dev {
+ /* lock protects: state, all the req_busy's, and cbbuf_cmnd */
+ spinlock_t lock;
+ struct usb_gadget *gadget;
+
+ /* filesem protects: backing files in use */
+ struct rw_semaphore filesem;
+
+ struct usb_ep *ep0; // Handy copy of gadget->ep0
+ struct usb_request *ep0req; // For control responses
+ volatile unsigned int ep0_req_tag;
+ const char *ep0req_name;
+
+ struct usb_request *intreq; // For interrupt responses
+ volatile int intreq_busy;
+ struct fsg_buffhd *intr_buffhd;
+
+ unsigned int bulk_out_maxpacket;
+ enum fsg_state state; // For exception handling
+ unsigned int exception_req_tag;
+
+ u8 config, new_config;
+
+ unsigned int running : 1;
+ unsigned int bulk_in_enabled : 1;
+ unsigned int bulk_out_enabled : 1;
+ unsigned int intr_in_enabled : 1;
+ unsigned int phase_error : 1;
+ unsigned int short_packet_received : 1;
+ unsigned int bad_lun_okay : 1;
+
+ unsigned long atomic_bitflags;
+#define REGISTERED 0
+#define CLEAR_BULK_HALTS 1
+#define SUSPENDED 2
+
+ struct usb_ep *bulk_in;
+ struct usb_ep *bulk_out;
+ struct usb_ep *intr_in;
+
+ struct fsg_buffhd *next_buffhd_to_fill;
+ struct fsg_buffhd *next_buffhd_to_drain;
+ struct fsg_buffhd buffhds[NUM_BUFFERS];
+
+ wait_queue_head_t thread_wqh;
+ int thread_wakeup_needed;
+ struct completion thread_notifier;
+ int thread_pid;
+ struct task_struct *thread_task;
+ sigset_t thread_signal_mask;
+
+ int cmnd_size;
+ u8 cmnd[MAX_COMMAND_SIZE];
+ enum data_direction data_dir;
+ u32 data_size;
+ u32 data_size_from_cmnd;
+ u32 tag;
+ unsigned int lun;
+ u32 residue;
+ u32 usb_amount_left;
+
+ /* The CB protocol offers no way for a host to know when a command
+ * has completed. As a result the next command may arrive early,
+ * and we will still have to handle it. For that reason we need
+ * a buffer to store new commands when using CB (or CBI, which
+ * does not oblige a host to wait for command completion either). */
+ int cbbuf_cmnd_size;
+ u8 cbbuf_cmnd[MAX_COMMAND_SIZE];
+
+ unsigned int nluns;
+ struct lun *luns;
+ struct lun *curlun;
+ struct completion lun_released;
+};
+
+typedef void (*fsg_routine_t)(struct fsg_dev *);
+
+static int inline exception_in_progress(struct fsg_dev *fsg)
+{
+ return (fsg->state > FSG_STATE_IDLE);
+}
+
+/* Make bulk-out requests be divisible by the maxpacket size */
+static void inline set_bulk_out_req_length(struct fsg_dev *fsg,
+ struct fsg_buffhd *bh, unsigned int length)
+{
+ unsigned int rem;
+
+ bh->bulk_out_intended_length = length;
+ rem = length % fsg->bulk_out_maxpacket;
+ if (rem > 0)
+ length += fsg->bulk_out_maxpacket - rem;
+ bh->outreq->length = length;
+}
+
+static struct fsg_dev *the_fsg;
+static struct usb_gadget_driver fsg_driver;
+
+static void close_backing_file(struct lun *curlun);
+static void close_all_backing_files(struct fsg_dev *fsg);
+
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef DUMP_MSGS
+
+static void dump_msg(struct fsg_dev *fsg, const char *label,
+ const u8 *buf, unsigned int length)
+{
+ unsigned int start, num, i;
+ char line[52], *p;
+
+ if (length >= 512)
+ return;
+ DBG(fsg, "%s, length %u:\n", label, length);
+
+ start = 0;
+ while (length > 0) {
+ num = min(length, 16u);
+ p = line;
+ for (i = 0; i < num; ++i) {
+ if (i == 8)
+ *p++ = ' ';
+ sprintf(p, " %02x", buf[i]);
+ p += 3;
+ }
+ *p = 0;
+ printk(KERN_DEBUG "%6x: %s\n", start, line);
+ buf += num;
+ start += num;
+ length -= num;
+ }
+}
+
+static void inline dump_cdb(struct fsg_dev *fsg)
+{}
+
+#else
+
+static void inline dump_msg(struct fsg_dev *fsg, const char *label,
+ const u8 *buf, unsigned int length)
+{}
+
+static void inline dump_cdb(struct fsg_dev *fsg)
+{
+ int i;
+ char cmdbuf[3*MAX_COMMAND_SIZE + 1];
+
+ for (i = 0; i < fsg->cmnd_size; ++i)
+ sprintf(cmdbuf + i*3, " %02x", fsg->cmnd[i]);
+ VDBG(fsg, "SCSI CDB: %s\n", cmdbuf);
+}
+
+#endif /* DUMP_MSGS */
+
+
+static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
+{
+ const char *name;
+
+ if (ep == fsg->bulk_in)
+ name = "bulk-in";
+ else if (ep == fsg->bulk_out)
+ name = "bulk-out";
+ else
+ name = ep->name;
+ DBG(fsg, "%s set halt\n", name);
+ return usb_ep_set_halt(ep);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* Routines for unaligned data access */
+
+static u16 inline get_be16(u8 *buf)
+{
+ return ((u16) buf[0] << 8) | ((u16) buf[1]);
+}
+
+static u32 inline get_be32(u8 *buf)
+{
+ return ((u32) buf[0] << 24) | ((u32) buf[1] << 16) |
+ ((u32) buf[2] << 8) | ((u32) buf[3]);
+}
+
+static void inline put_be16(u8 *buf, u16 val)
+{
+ buf[0] = val >> 8;
+ buf[1] = val;
+}
+
+static void inline put_be32(u8 *buf, u32 val)
+{
+ buf[0] = val >> 24;
+ buf[1] = val >> 16;
+ buf[2] = val >> 8;
+ buf[3] = val;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * DESCRIPTORS ... most are static, but strings and (full) configuration
+ * descriptors are built on demand. Also the (static) config and interface
+ * descriptors are adjusted during fsg_bind().
+ */
+#define STRING_MANUFACTURER 1
+#define STRING_PRODUCT 2
+#define STRING_SERIAL 3
+#define STRING_CONFIG 4
+#define STRING_INTERFACE 5
+
+/* There is only one configuration. */
+#define CONFIG_VALUE 1
+
+static struct usb_device_descriptor
+device_desc = {
+ .bLength = sizeof device_desc,
+ .bDescriptorType = USB_DT_DEVICE,
+
+ .bcdUSB = __constant_cpu_to_le16(0x0200),
+ .bDeviceClass = USB_CLASS_PER_INTERFACE,
+
+ /* The next three values can be overridden by module parameters */
+ .idVendor = __constant_cpu_to_le16(DRIVER_VENDOR_ID),
+ .idProduct = __constant_cpu_to_le16(DRIVER_PRODUCT_ID),
+ .bcdDevice = __constant_cpu_to_le16(0xffff),
+
+ .iManufacturer = STRING_MANUFACTURER,
+ .iProduct = STRING_PRODUCT,
+ .iSerialNumber = STRING_SERIAL,
+ .bNumConfigurations = 1,
+};
+
+static struct usb_config_descriptor
+config_desc = {
+ .bLength = sizeof config_desc,
+ .bDescriptorType = USB_DT_CONFIG,
+
+ /* wTotalLength computed by usb_gadget_config_buf() */
+ .bNumInterfaces = 1,
+ .bConfigurationValue = CONFIG_VALUE,
+ .iConfiguration = STRING_CONFIG,
+ .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
+ .bMaxPower = 1, // self-powered
+};
+
+static struct usb_otg_descriptor
+otg_desc = {
+ .bLength = sizeof(otg_desc),
+ .bDescriptorType = USB_DT_OTG,
+
+ .bmAttributes = USB_OTG_SRP,
+};
+
+/* There is only one interface. */
+
+static struct usb_interface_descriptor
+intf_desc = {
+ .bLength = sizeof intf_desc,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+ .bNumEndpoints = 2, // Adjusted during fsg_bind()
+ .bInterfaceClass = USB_CLASS_MASS_STORAGE,
+ .bInterfaceSubClass = USB_SC_SCSI, // Adjusted during fsg_bind()
+ .bInterfaceProtocol = USB_PR_BULK, // Adjusted during fsg_bind()
+ .iInterface = STRING_INTERFACE,
+};
+
+/* Three full-speed endpoint descriptors: bulk-in, bulk-out,
+ * and interrupt-in. */
+
+static struct usb_endpoint_descriptor
+fs_bulk_in_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ /* wMaxPacketSize set by autoconfiguration */
+};
+
+static struct usb_endpoint_descriptor
+fs_bulk_out_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ /* wMaxPacketSize set by autoconfiguration */
+};
+
+static struct usb_endpoint_descriptor
+fs_intr_in_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .wMaxPacketSize = __constant_cpu_to_le16(2),
+ .bInterval = 32, // frames -> 32 ms
+};
+
+static const struct usb_descriptor_header *fs_function[] = {
+ (struct usb_descriptor_header *) &otg_desc,
+ (struct usb_descriptor_header *) &intf_desc,
+ (struct usb_descriptor_header *) &fs_bulk_in_desc,
+ (struct usb_descriptor_header *) &fs_bulk_out_desc,
+ (struct usb_descriptor_header *) &fs_intr_in_desc,
+ NULL,
+};
+#define FS_FUNCTION_PRE_EP_ENTRIES 2
+
+
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+
+/*
+ * USB 2.0 devices need to expose both high speed and full speed
+ * descriptors, unless they only run at full speed.
+ *
+ * That means alternate endpoint descriptors (bigger packets)
+ * and a "device qualifier" ... plus more construction options
+ * for the config descriptor.
+ */
+static struct usb_qualifier_descriptor
+dev_qualifier = {
+ .bLength = sizeof dev_qualifier,
+ .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
+
+ .bcdUSB = __constant_cpu_to_le16(0x0200),
+ .bDeviceClass = USB_CLASS_PER_INTERFACE,
+
+ .bNumConfigurations = 1,
+};
+
+static struct usb_endpoint_descriptor
+hs_bulk_in_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ /* bEndpointAddress copied from fs_bulk_in_desc during fsg_bind() */
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor
+hs_bulk_out_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ /* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
+ .bInterval = 1, // NAK every 1 uframe
+};
+
+static struct usb_endpoint_descriptor
+hs_intr_in_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ /* bEndpointAddress copied from fs_intr_in_desc during fsg_bind() */
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .wMaxPacketSize = __constant_cpu_to_le16(2),
+ .bInterval = 9, // 2**(9-1) = 256 uframes -> 32 ms
+};
+
+static const struct usb_descriptor_header *hs_function[] = {
+ (struct usb_descriptor_header *) &otg_desc,
+ (struct usb_descriptor_header *) &intf_desc,
+ (struct usb_descriptor_header *) &hs_bulk_in_desc,
+ (struct usb_descriptor_header *) &hs_bulk_out_desc,
+ (struct usb_descriptor_header *) &hs_intr_in_desc,
+ NULL,
+};
+#define HS_FUNCTION_PRE_EP_ENTRIES 2
+
+/* Maxpacket and other transfer characteristics vary by speed. */
+#define ep_desc(g,fs,hs) (((g)->speed==USB_SPEED_HIGH) ? (hs) : (fs))
+
+#else
+
+/* If there's no high speed support, always use the full-speed descriptor. */
+#define ep_desc(g,fs,hs) fs
+
+#endif /* !CONFIG_USB_GADGET_DUALSPEED */
+
+
+/* The CBI specification limits the serial string to 12 uppercase hexadecimal
+ * characters. */
+static char manufacturer[64];
+static char serial[13];
+
+/* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */
+static struct usb_string strings[] = {
+ {STRING_MANUFACTURER, manufacturer},
+ {STRING_PRODUCT, longname},
+ {STRING_SERIAL, serial},
+ {STRING_CONFIG, "Self-powered"},
+ {STRING_INTERFACE, "Mass Storage"},
+ {}
+};
+
+static struct usb_gadget_strings stringtab = {
+ .language = 0x0409, // en-us
+ .strings = strings,
+};
+
+
+/*
+ * Config descriptors must agree with the code that sets configurations
+ * and with code managing interfaces and their altsettings. They must
+ * also handle different speeds and other-speed requests.
+ */
+static int populate_config_buf(struct usb_gadget *gadget,
+ u8 *buf, u8 type, unsigned index)
+{
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+ enum usb_device_speed speed = gadget->speed;
+#endif
+ int len;
+ const struct usb_descriptor_header **function;
+
+ if (index > 0)
+ return -EINVAL;
+
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+ if (type == USB_DT_OTHER_SPEED_CONFIG)
+ speed = (USB_SPEED_FULL + USB_SPEED_HIGH) - speed;
+ if (speed == USB_SPEED_HIGH)
+ function = hs_function;
+ else
+#endif
+ function = fs_function;
+
+ /* for now, don't advertise srp-only devices */
+ if (!gadget->is_otg)
+ function++;
+
+ len = usb_gadget_config_buf(&config_desc, buf, EP0_BUFSIZE, function);
+ ((struct usb_config_descriptor *) buf)->bDescriptorType = type;
+ return len;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* These routines may be called in process context or in_irq */
+
+static void wakeup_thread(struct fsg_dev *fsg)
+{
+ /* Tell the main thread that something has happened */
+ fsg->thread_wakeup_needed = 1;
+ wake_up_all(&fsg->thread_wqh);
+}
+
+
+static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state)
+{
+ unsigned long flags;
+ struct task_struct *thread_task;
+
+ /* Do nothing if a higher-priority exception is already in progress.
+ * If a lower-or-equal priority exception is in progress, preempt it
+ * and notify the main thread by sending it a signal. */
+ spin_lock_irqsave(&fsg->lock, flags);
+ if (fsg->state <= new_state) {
+ fsg->exception_req_tag = fsg->ep0_req_tag;
+ fsg->state = new_state;
+ thread_task = fsg->thread_task;
+ if (thread_task)
+ send_sig_info(SIGUSR1, SEND_SIG_FORCED, thread_task);
+ }
+ spin_unlock_irqrestore(&fsg->lock, flags);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* The disconnect callback and ep0 routines. These always run in_irq,
+ * except that ep0_queue() is called in the main thread to acknowledge
+ * completion of various requests: set config, set interface, and
+ * Bulk-only device reset. */
+
+static void fsg_disconnect(struct usb_gadget *gadget)
+{
+ struct fsg_dev *fsg = get_gadget_data(gadget);
+
+ DBG(fsg, "disconnect or port reset\n");
+ raise_exception(fsg, FSG_STATE_DISCONNECT);
+}
+
+
+static int ep0_queue(struct fsg_dev *fsg)
+{
+ int rc;
+
+ rc = usb_ep_queue(fsg->ep0, fsg->ep0req, GFP_ATOMIC);
+ if (rc != 0 && rc != -ESHUTDOWN) {
+
+ /* We can't do much more than wait for a reset */
+ WARN(fsg, "error in submission: %s --> %d\n",
+ fsg->ep0->name, rc);
+ }
+ return rc;
+}
+
+static void ep0_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ struct fsg_dev *fsg = (struct fsg_dev *) ep->driver_data;
+
+ if (req->actual > 0)
+ dump_msg(fsg, fsg->ep0req_name, req->buf, req->actual);
+ if (req->status || req->actual != req->length)
+ DBG(fsg, "%s --> %d, %u/%u\n", __FUNCTION__,
+ req->status, req->actual, req->length);
+ if (req->status == -ECONNRESET) // Request was cancelled
+ usb_ep_fifo_flush(ep);
+
+ if (req->status == 0 && req->context)
+ ((fsg_routine_t) (req->context))(fsg);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* Bulk and interrupt endpoint completion handlers.
+ * These always run in_irq. */
+
+static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ struct fsg_dev *fsg = (struct fsg_dev *) ep->driver_data;
+ struct fsg_buffhd *bh = (struct fsg_buffhd *) req->context;
+
+ if (req->status || req->actual != req->length)
+ DBG(fsg, "%s --> %d, %u/%u\n", __FUNCTION__,
+ req->status, req->actual, req->length);
+ if (req->status == -ECONNRESET) // Request was cancelled
+ usb_ep_fifo_flush(ep);
+
+ /* Hold the lock while we update the request and buffer states */
+ spin_lock(&fsg->lock);
+ bh->inreq_busy = 0;
+ bh->state = BUF_STATE_EMPTY;
+ spin_unlock(&fsg->lock);
+ wakeup_thread(fsg);
+}
+
+static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ struct fsg_dev *fsg = (struct fsg_dev *) ep->driver_data;
+ struct fsg_buffhd *bh = (struct fsg_buffhd *) req->context;
+
+ dump_msg(fsg, "bulk-out", req->buf, req->actual);
+ if (req->status || req->actual != bh->bulk_out_intended_length)
+ DBG(fsg, "%s --> %d, %u/%u\n", __FUNCTION__,
+ req->status, req->actual,
+ bh->bulk_out_intended_length);
+ if (req->status == -ECONNRESET) // Request was cancelled
+ usb_ep_fifo_flush(ep);
+
+ /* Hold the lock while we update the request and buffer states */
+ spin_lock(&fsg->lock);
+ bh->outreq_busy = 0;
+ bh->state = BUF_STATE_FULL;
+ spin_unlock(&fsg->lock);
+ wakeup_thread(fsg);
+}
+
+
+#ifdef CONFIG_USB_FILE_STORAGE_TEST
+static void intr_in_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ struct fsg_dev *fsg = (struct fsg_dev *) ep->driver_data;
+ struct fsg_buffhd *bh = (struct fsg_buffhd *) req->context;
+
+ if (req->status || req->actual != req->length)
+ DBG(fsg, "%s --> %d, %u/%u\n", __FUNCTION__,
+ req->status, req->actual, req->length);
+ if (req->status == -ECONNRESET) // Request was cancelled
+ usb_ep_fifo_flush(ep);
+
+ /* Hold the lock while we update the request and buffer states */
+ spin_lock(&fsg->lock);
+ fsg->intreq_busy = 0;
+ bh->state = BUF_STATE_EMPTY;
+ spin_unlock(&fsg->lock);
+ wakeup_thread(fsg);
+}
+
+#else
+static void intr_in_complete(struct usb_ep *ep, struct usb_request *req)
+{}
+#endif /* CONFIG_USB_FILE_STORAGE_TEST */
+
+
+/*-------------------------------------------------------------------------*/
+
+/* Ep0 class-specific handlers. These always run in_irq. */
+
+#ifdef CONFIG_USB_FILE_STORAGE_TEST
+static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh)
+{
+ struct usb_request *req = fsg->ep0req;
+ static u8 cbi_reset_cmnd[6] = {
+ SC_SEND_DIAGNOSTIC, 4, 0xff, 0xff, 0xff, 0xff};
+
+ /* Error in command transfer? */
+ if (req->status || req->length != req->actual ||
+ req->actual < 6 || req->actual > MAX_COMMAND_SIZE) {
+
+ /* Not all controllers allow a protocol stall after
+ * receiving control-out data, but we'll try anyway. */
+ fsg_set_halt(fsg, fsg->ep0);
+ return; // Wait for reset
+ }
+
+ /* Is it the special reset command? */
+ if (req->actual >= sizeof cbi_reset_cmnd &&
+ memcmp(req->buf, cbi_reset_cmnd,
+ sizeof cbi_reset_cmnd) == 0) {
+
+ /* Raise an exception to stop the current operation
+ * and reinitialize our state. */
+ DBG(fsg, "cbi reset request\n");
+ raise_exception(fsg, FSG_STATE_RESET);
+ return;
+ }
+
+ VDBG(fsg, "CB[I] accept device-specific command\n");
+ spin_lock(&fsg->lock);
+
+ /* Save the command for later */
+ if (fsg->cbbuf_cmnd_size)
+ WARN(fsg, "CB[I] overwriting previous command\n");
+ fsg->cbbuf_cmnd_size = req->actual;
+ memcpy(fsg->cbbuf_cmnd, req->buf, fsg->cbbuf_cmnd_size);
+
+ spin_unlock(&fsg->lock);
+ wakeup_thread(fsg);
+}
+
+#else
+static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh)
+{}
+#endif /* CONFIG_USB_FILE_STORAGE_TEST */
+
+
+static int class_setup_req(struct fsg_dev *fsg,
+ const struct usb_ctrlrequest *ctrl)
+{
+ struct usb_request *req = fsg->ep0req;
+ int value = -EOPNOTSUPP;
+ u16 w_index = ctrl->wIndex;
+ u16 w_length = ctrl->wLength;
+
+ if (!fsg->config)
+ return value;
+
+ /* Handle Bulk-only class-specific requests */
+ if (transport_is_bbb()) {
+ switch (ctrl->bRequest) {
+
+ case USB_BULK_RESET_REQUEST:
+ if (ctrl->bRequestType != (USB_DIR_OUT |
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE))
+ break;
+ if (w_index != 0) {
+ value = -EDOM;
+ break;
+ }
+
+ /* Raise an exception to stop the current operation
+ * and reinitialize our state. */
+ DBG(fsg, "bulk reset request\n");
+ raise_exception(fsg, FSG_STATE_RESET);
+ value = DELAYED_STATUS;
+ break;
+
+ case USB_BULK_GET_MAX_LUN_REQUEST:
+ if (ctrl->bRequestType != (USB_DIR_IN |
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE))
+ break;
+ if (w_index != 0) {
+ value = -EDOM;
+ break;
+ }
+ VDBG(fsg, "get max LUN\n");
+ *(u8 *) req->buf = fsg->nluns - 1;
+ value = min(w_length, (u16) 1);
+ break;
+ }
+ }
+
+ /* Handle CBI class-specific requests */
+ else {
+ switch (ctrl->bRequest) {
+
+ case USB_CBI_ADSC_REQUEST:
+ if (ctrl->bRequestType != (USB_DIR_OUT |
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE))
+ break;
+ if (w_index != 0) {
+ value = -EDOM;
+ break;
+ }
+ if (w_length > MAX_COMMAND_SIZE) {
+ value = -EOVERFLOW;
+ break;
+ }
+ value = w_length;
+ fsg->ep0req->context = received_cbi_adsc;
+ break;
+ }
+ }
+
+ if (value == -EOPNOTSUPP)
+ VDBG(fsg,
+ "unknown class-specific control req "
+ "%02x.%02x v%04x i%04x l%u\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ ctrl->wValue, w_index, w_length);
+ return value;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* Ep0 standard request handlers. These always run in_irq. */
+
+static int standard_setup_req(struct fsg_dev *fsg,
+ const struct usb_ctrlrequest *ctrl)
+{
+ struct usb_request *req = fsg->ep0req;
+ int value = -EOPNOTSUPP;
+ u16 w_index = ctrl->wIndex;
+ u16 w_value = ctrl->wValue;
+ u16 w_length = ctrl->wLength;
+
+ /* Usually this just stores reply data in the pre-allocated ep0 buffer,
+ * but config change events will also reconfigure hardware. */
+ switch (ctrl->bRequest) {
+
+ case USB_REQ_GET_DESCRIPTOR:
+ if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD |
+ USB_RECIP_DEVICE))
+ break;
+ switch (w_value >> 8) {
+
+ case USB_DT_DEVICE:
+ VDBG(fsg, "get device descriptor\n");
+ value = min(w_length, (u16) sizeof device_desc);
+ memcpy(req->buf, &device_desc, value);
+ break;
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+ case USB_DT_DEVICE_QUALIFIER:
+ VDBG(fsg, "get device qualifier\n");
+ if (!fsg->gadget->is_dualspeed)
+ break;
+ value = min(w_length, (u16) sizeof dev_qualifier);
+ memcpy(req->buf, &dev_qualifier, value);
+ break;
+
+ case USB_DT_OTHER_SPEED_CONFIG:
+ VDBG(fsg, "get other-speed config descriptor\n");
+ if (!fsg->gadget->is_dualspeed)
+ break;
+ goto get_config;
+#endif
+ case USB_DT_CONFIG:
+ VDBG(fsg, "get configuration descriptor\n");
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+ get_config:
+#endif
+ value = populate_config_buf(fsg->gadget,
+ req->buf,
+ w_value >> 8,
+ w_value & 0xff);
+ if (value >= 0)
+ value = min(w_length, (u16) value);
+ break;
+
+ case USB_DT_STRING:
+ VDBG(fsg, "get string descriptor\n");
+
+ /* wIndex == language code */
+ value = usb_gadget_get_string(&stringtab,
+ w_value & 0xff, req->buf);
+ if (value >= 0)
+ value = min(w_length, (u16) value);
+ break;
+ }
+ break;
+
+ /* One config, two speeds */
+ case USB_REQ_SET_CONFIGURATION:
+ if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD |
+ USB_RECIP_DEVICE))
+ break;
+ VDBG(fsg, "set configuration\n");
+ if (w_value == CONFIG_VALUE || w_value == 0) {
+ fsg->new_config = w_value;
+
+ /* Raise an exception to wipe out previous transaction
+ * state (queued bufs, etc) and set the new config. */
+ raise_exception(fsg, FSG_STATE_CONFIG_CHANGE);
+ value = DELAYED_STATUS;
+ }
+ break;
+ case USB_REQ_GET_CONFIGURATION:
+ if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD |
+ USB_RECIP_DEVICE))
+ break;
+ VDBG(fsg, "get configuration\n");
+ *(u8 *) req->buf = fsg->config;
+ value = min(w_length, (u16) 1);
+ break;
+
+ case USB_REQ_SET_INTERFACE:
+ if (ctrl->bRequestType != (USB_DIR_OUT| USB_TYPE_STANDARD |
+ USB_RECIP_INTERFACE))
+ break;
+ if (fsg->config && w_index == 0) {
+
+ /* Raise an exception to wipe out previous transaction
+ * state (queued bufs, etc) and install the new
+ * interface altsetting. */
+ raise_exception(fsg, FSG_STATE_INTERFACE_CHANGE);
+ value = DELAYED_STATUS;
+ }
+ break;
+ case USB_REQ_GET_INTERFACE:
+ if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD |
+ USB_RECIP_INTERFACE))
+ break;
+ if (!fsg->config)
+ break;
+ if (w_index != 0) {
+ value = -EDOM;
+ break;
+ }
+ VDBG(fsg, "get interface\n");
+ *(u8 *) req->buf = 0;
+ value = min(w_length, (u16) 1);
+ break;
+
+ default:
+ VDBG(fsg,
+ "unknown control req %02x.%02x v%04x i%04x l%u\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ w_value, w_index, w_length);
+ }
+
+ return value;
+}
+
+
+static int fsg_setup(struct usb_gadget *gadget,
+ const struct usb_ctrlrequest *ctrl)
+{
+ struct fsg_dev *fsg = get_gadget_data(gadget);
+ int rc;
+
+ ++fsg->ep0_req_tag; // Record arrival of a new request
+ fsg->ep0req->context = NULL;
+ fsg->ep0req->length = 0;
+ dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl));
+
+ if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS)
+ rc = class_setup_req(fsg, ctrl);
+ else
+ rc = standard_setup_req(fsg, ctrl);
+
+ /* Respond with data/status or defer until later? */
+ if (rc >= 0 && rc != DELAYED_STATUS) {
+ fsg->ep0req->length = rc;
+ fsg->ep0req->zero = (rc < ctrl->wLength &&
+ (rc % gadget->ep0->maxpacket) == 0);
+ fsg->ep0req_name = (ctrl->bRequestType & USB_DIR_IN ?
+ "ep0-in" : "ep0-out");
+ rc = ep0_queue(fsg);
+ }
+
+ /* Device either stalls (rc < 0) or reports success */
+ return rc;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* All the following routines run in process context */
+
+
+/* Use this for bulk or interrupt transfers, not ep0 */
+static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep,
+ struct usb_request *req, volatile int *pbusy,
+ volatile enum fsg_buffer_state *state)
+{
+ int rc;
+
+ if (ep == fsg->bulk_in)
+ dump_msg(fsg, "bulk-in", req->buf, req->length);
+ else if (ep == fsg->intr_in)
+ dump_msg(fsg, "intr-in", req->buf, req->length);
+ *pbusy = 1;
+ *state = BUF_STATE_BUSY;
+ rc = usb_ep_queue(ep, req, GFP_KERNEL);
+ if (rc != 0) {
+ *pbusy = 0;
+ *state = BUF_STATE_EMPTY;
+
+ /* We can't do much more than wait for a reset */
+
+ /* Note: currently the net2280 driver fails zero-length
+ * submissions if DMA is enabled. */
+ if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP &&
+ req->length == 0))
+ WARN(fsg, "error in submission: %s --> %d\n",
+ ep->name, rc);
+ }
+}
+
+
+static int sleep_thread(struct fsg_dev *fsg)
+{
+ int rc;
+
+ /* Wait until a signal arrives or we are woken up */
+ rc = wait_event_interruptible(fsg->thread_wqh,
+ fsg->thread_wakeup_needed);
+ fsg->thread_wakeup_needed = 0;
+ if (current->flags & PF_FREEZE)
+ refrigerator(PF_FREEZE);
+ return (rc ? -EINTR : 0);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int do_read(struct fsg_dev *fsg)
+{
+ struct lun *curlun = fsg->curlun;
+ u32 lba;
+ struct fsg_buffhd *bh;
+ int rc;
+ u32 amount_left;
+ loff_t file_offset, file_offset_tmp;
+ unsigned int amount;
+ unsigned int partial_page;
+ ssize_t nread;
+
+ /* Get the starting Logical Block Address and check that it's
+ * not too big */
+ if (fsg->cmnd[0] == SC_READ_6)
+ lba = (fsg->cmnd[1] << 16) | get_be16(&fsg->cmnd[2]);
+ else {
+ lba = get_be32(&fsg->cmnd[2]);
+
+ /* We allow DPO (Disable Page Out = don't save data in the
+ * cache) and FUA (Force Unit Access = don't read from the
+ * cache), but we don't implement them. */
+ if ((fsg->cmnd[1] & ~0x18) != 0) {
+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+ return -EINVAL;
+ }
+ }
+ if (lba >= curlun->num_sectors) {
+ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+ return -EINVAL;
+ }
+ file_offset = ((loff_t) lba) << 9;
+
+ /* Carry out the file reads */
+ amount_left = fsg->data_size_from_cmnd;
+ if (unlikely(amount_left == 0))
+ return -EIO; // No default reply
+
+ for (;;) {
+
+ /* Figure out how much we need to read:
+ * Try to read the remaining amount.
+ * But don't read more than the buffer size.
+ * And don't try to read past the end of the file.
+ * Finally, if we're not at a page boundary, don't read past
+ * the next page.
+ * If this means reading 0 then we were asked to read past
+ * the end of file. */
+ amount = min((unsigned int) amount_left, mod_data.buflen);
+ amount = min((loff_t) amount,
+ curlun->file_length - file_offset);
+ partial_page = file_offset & (PAGE_CACHE_SIZE - 1);
+ if (partial_page > 0)
+ amount = min(amount, (unsigned int) PAGE_CACHE_SIZE -
+ partial_page);
+
+ /* Wait for the next buffer to become available */
+ bh = fsg->next_buffhd_to_fill;
+ while (bh->state != BUF_STATE_EMPTY) {
+ if ((rc = sleep_thread(fsg)) != 0)
+ return rc;
+ }
+
+ /* If we were asked to read past the end of file,
+ * end with an empty buffer. */
+ if (amount == 0) {
+ curlun->sense_data =
+ SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+ curlun->sense_data_info = file_offset >> 9;
+ bh->inreq->length = 0;
+ bh->state = BUF_STATE_FULL;
+ break;
+ }
+
+ /* Perform the read */
+ file_offset_tmp = file_offset;
+ nread = vfs_read(curlun->filp,
+ (char __user *) bh->buf,
+ amount, &file_offset_tmp);
+ VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
+ (unsigned long long) file_offset,
+ (int) nread);
+ if (signal_pending(current))
+ return -EINTR;
+
+ if (nread < 0) {
+ LDBG(curlun, "error in file read: %d\n",
+ (int) nread);
+ nread = 0;
+ } else if (nread < amount) {
+ LDBG(curlun, "partial file read: %d/%u\n",
+ (int) nread, amount);
+ nread -= (nread & 511); // Round down to a block
+ }
+ file_offset += nread;
+ amount_left -= nread;
+ fsg->residue -= nread;
+ bh->inreq->length = nread;
+ bh->state = BUF_STATE_FULL;
+
+ /* If an error occurred, report it and its position */
+ if (nread < amount) {
+ curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
+ curlun->sense_data_info = file_offset >> 9;
+ break;
+ }
+
+ if (amount_left == 0)
+ break; // No more left to read
+
+ /* Send this buffer and go read some more */
+ bh->inreq->zero = 0;
+ start_transfer(fsg, fsg->bulk_in, bh->inreq,
+ &bh->inreq_busy, &bh->state);
+ fsg->next_buffhd_to_fill = bh->next;
+ }
+
+ return -EIO; // No default reply
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int do_write(struct fsg_dev *fsg)
+{
+ struct lun *curlun = fsg->curlun;
+ u32 lba;
+ struct fsg_buffhd *bh;
+ int get_some_more;
+ u32 amount_left_to_req, amount_left_to_write;
+ loff_t usb_offset, file_offset, file_offset_tmp;
+ unsigned int amount;
+ unsigned int partial_page;
+ ssize_t nwritten;
+ int rc;
+
+ if (curlun->ro) {
+ curlun->sense_data = SS_WRITE_PROTECTED;
+ return -EINVAL;
+ }
+ curlun->filp->f_flags &= ~O_SYNC; // Default is not to wait
+
+ /* Get the starting Logical Block Address and check that it's
+ * not too big */
+ if (fsg->cmnd[0] == SC_WRITE_6)
+ lba = (fsg->cmnd[1] << 16) | get_be16(&fsg->cmnd[2]);
+ else {
+ lba = get_be32(&fsg->cmnd[2]);
+
+ /* We allow DPO (Disable Page Out = don't save data in the
+ * cache) and FUA (Force Unit Access = write directly to the
+ * medium). We don't implement DPO; we implement FUA by
+ * performing synchronous output. */
+ if ((fsg->cmnd[1] & ~0x18) != 0) {
+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+ return -EINVAL;
+ }
+ if (fsg->cmnd[1] & 0x08) // FUA
+ curlun->filp->f_flags |= O_SYNC;
+ }
+ if (lba >= curlun->num_sectors) {
+ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+ return -EINVAL;
+ }
+
+ /* Carry out the file writes */
+ get_some_more = 1;
+ file_offset = usb_offset = ((loff_t) lba) << 9;
+ amount_left_to_req = amount_left_to_write = fsg->data_size_from_cmnd;
+
+ while (amount_left_to_write > 0) {
+
+ /* Queue a request for more data from the host */
+ bh = fsg->next_buffhd_to_fill;
+ if (bh->state == BUF_STATE_EMPTY && get_some_more) {
+
+ /* Figure out how much we want to get:
+ * Try to get the remaining amount.
+ * But don't get more than the buffer size.
+ * And don't try to go past the end of the file.
+ * If we're not at a page boundary,
+ * don't go past the next page.
+ * If this means getting 0, then we were asked
+ * to write past the end of file.
+ * Finally, round down to a block boundary. */
+ amount = min(amount_left_to_req, mod_data.buflen);
+ amount = min((loff_t) amount, curlun->file_length -
+ usb_offset);
+ partial_page = usb_offset & (PAGE_CACHE_SIZE - 1);
+ if (partial_page > 0)
+ amount = min(amount,
+ (unsigned int) PAGE_CACHE_SIZE - partial_page);
+
+ if (amount == 0) {
+ get_some_more = 0;
+ curlun->sense_data =
+ SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+ curlun->sense_data_info = usb_offset >> 9;
+ continue;
+ }
+ amount -= (amount & 511);
+ if (amount == 0) {
+
+ /* Why were we were asked to transfer a
+ * partial block? */
+ get_some_more = 0;
+ continue;
+ }
+
+ /* Get the next buffer */
+ usb_offset += amount;
+ fsg->usb_amount_left -= amount;
+ amount_left_to_req -= amount;
+ if (amount_left_to_req == 0)
+ get_some_more = 0;
+
+ /* amount is always divisible by 512, hence by
+ * the bulk-out maxpacket size */
+ bh->outreq->length = bh->bulk_out_intended_length =
+ amount;
+ start_transfer(fsg, fsg->bulk_out, bh->outreq,
+ &bh->outreq_busy, &bh->state);
+ fsg->next_buffhd_to_fill = bh->next;
+ continue;
+ }
+
+ /* Write the received data to the backing file */
+ bh = fsg->next_buffhd_to_drain;
+ if (bh->state == BUF_STATE_EMPTY && !get_some_more)
+ break; // We stopped early
+ if (bh->state == BUF_STATE_FULL) {
+ fsg->next_buffhd_to_drain = bh->next;
+ bh->state = BUF_STATE_EMPTY;
+
+ /* Did something go wrong with the transfer? */
+ if (bh->outreq->status != 0) {
+ curlun->sense_data = SS_COMMUNICATION_FAILURE;
+ curlun->sense_data_info = file_offset >> 9;
+ break;
+ }
+
+ amount = bh->outreq->actual;
+ if (curlun->file_length - file_offset < amount) {
+ LERROR(curlun,
+ "write %u @ %llu beyond end %llu\n",
+ amount, (unsigned long long) file_offset,
+ (unsigned long long) curlun->file_length);
+ amount = curlun->file_length - file_offset;
+ }
+
+ /* Perform the write */
+ file_offset_tmp = file_offset;
+ nwritten = vfs_write(curlun->filp,
+ (char __user *) bh->buf,
+ amount, &file_offset_tmp);
+ VLDBG(curlun, "file write %u @ %llu -> %d\n", amount,
+ (unsigned long long) file_offset,
+ (int) nwritten);
+ if (signal_pending(current))
+ return -EINTR; // Interrupted!
+
+ if (nwritten < 0) {
+ LDBG(curlun, "error in file write: %d\n",
+ (int) nwritten);
+ nwritten = 0;
+ } else if (nwritten < amount) {
+ LDBG(curlun, "partial file write: %d/%u\n",
+ (int) nwritten, amount);
+ nwritten -= (nwritten & 511);
+ // Round down to a block
+ }
+ file_offset += nwritten;
+ amount_left_to_write -= nwritten;
+ fsg->residue -= nwritten;
+
+ /* If an error occurred, report it and its position */
+ if (nwritten < amount) {
+ curlun->sense_data = SS_WRITE_ERROR;
+ curlun->sense_data_info = file_offset >> 9;
+ break;
+ }
+
+ /* Did the host decide to stop early? */
+ if (bh->outreq->actual != bh->outreq->length) {
+ fsg->short_packet_received = 1;
+ break;
+ }
+ continue;
+ }
+
+ /* Wait for something to happen */
+ if ((rc = sleep_thread(fsg)) != 0)
+ return rc;
+ }
+
+ return -EIO; // No default reply
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* Sync the file data, don't bother with the metadata.
+ * This code was copied from fs/buffer.c:sys_fdatasync(). */
+static int fsync_sub(struct lun *curlun)
+{
+ struct file *filp = curlun->filp;
+ struct inode *inode;
+ int rc, err;
+
+ if (curlun->ro || !filp)
+ return 0;
+ if (!filp->f_op->fsync)
+ return -EINVAL;
+
+ inode = filp->f_dentry->d_inode;
+ down(&inode->i_sem);
+ current->flags |= PF_SYNCWRITE;
+ rc = filemap_fdatawrite(inode->i_mapping);
+ err = filp->f_op->fsync(filp, filp->f_dentry, 1);
+ if (!rc)
+ rc = err;
+ err = filemap_fdatawait(inode->i_mapping);
+ if (!rc)
+ rc = err;
+ current->flags &= ~PF_SYNCWRITE;
+ up(&inode->i_sem);
+ VLDBG(curlun, "fdatasync -> %d\n", rc);
+ return rc;
+}
+
+static void fsync_all(struct fsg_dev *fsg)
+{
+ int i;
+
+ for (i = 0; i < fsg->nluns; ++i)
+ fsync_sub(&fsg->luns[i]);
+}
+
+static int do_synchronize_cache(struct fsg_dev *fsg)
+{
+ struct lun *curlun = fsg->curlun;
+ int rc;
+
+ /* We ignore the requested LBA and write out all file's
+ * dirty data buffers. */
+ rc = fsync_sub(curlun);
+ if (rc)
+ curlun->sense_data = SS_WRITE_ERROR;
+ return 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static void invalidate_sub(struct lun *curlun)
+{
+ struct file *filp = curlun->filp;
+ struct inode *inode = filp->f_dentry->d_inode;
+ unsigned long rc;
+
+ rc = invalidate_inode_pages(inode->i_mapping);
+ VLDBG(curlun, "invalidate_inode_pages -> %ld\n", rc);
+}
+
+static int do_verify(struct fsg_dev *fsg)
+{
+ struct lun *curlun = fsg->curlun;
+ u32 lba;
+ u32 verification_length;
+ struct fsg_buffhd *bh = fsg->next_buffhd_to_fill;
+ loff_t file_offset, file_offset_tmp;
+ u32 amount_left;
+ unsigned int amount;
+ ssize_t nread;
+
+ /* Get the starting Logical Block Address and check that it's
+ * not too big */
+ lba = get_be32(&fsg->cmnd[2]);
+ if (lba >= curlun->num_sectors) {
+ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+ return -EINVAL;
+ }
+
+ /* We allow DPO (Disable Page Out = don't save data in the
+ * cache) but we don't implement it. */
+ if ((fsg->cmnd[1] & ~0x10) != 0) {
+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+ return -EINVAL;
+ }
+
+ verification_length = get_be16(&fsg->cmnd[7]);
+ if (unlikely(verification_length == 0))
+ return -EIO; // No default reply
+
+ /* Prepare to carry out the file verify */
+ amount_left = verification_length << 9;
+ file_offset = ((loff_t) lba) << 9;
+
+ /* Write out all the dirty buffers before invalidating them */
+ fsync_sub(curlun);
+ if (signal_pending(current))
+ return -EINTR;
+
+ invalidate_sub(curlun);
+ if (signal_pending(current))
+ return -EINTR;
+
+ /* Just try to read the requested blocks */
+ while (amount_left > 0) {
+
+ /* Figure out how much we need to read:
+ * Try to read the remaining amount, but not more than
+ * the buffer size.
+ * And don't try to read past the end of the file.
+ * If this means reading 0 then we were asked to read
+ * past the end of file. */
+ amount = min((unsigned int) amount_left, mod_data.buflen);
+ amount = min((loff_t) amount,
+ curlun->file_length - file_offset);
+ if (amount == 0) {
+ curlun->sense_data =
+ SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
+ curlun->sense_data_info = file_offset >> 9;
+ break;
+ }
+
+ /* Perform the read */
+ file_offset_tmp = file_offset;
+ nread = vfs_read(curlun->filp,
+ (char __user *) bh->buf,
+ amount, &file_offset_tmp);
+ VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
+ (unsigned long long) file_offset,
+ (int) nread);
+ if (signal_pending(current))
+ return -EINTR;
+
+ if (nread < 0) {
+ LDBG(curlun, "error in file verify: %d\n",
+ (int) nread);
+ nread = 0;
+ } else if (nread < amount) {
+ LDBG(curlun, "partial file verify: %d/%u\n",
+ (int) nread, amount);
+ nread -= (nread & 511); // Round down to a sector
+ }
+ if (nread == 0) {
+ curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
+ curlun->sense_data_info = file_offset >> 9;
+ break;
+ }
+ file_offset += nread;
+ amount_left -= nread;
+ }
+ return 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int do_inquiry(struct fsg_dev *fsg, struct fsg_buffhd *bh)
+{
+ u8 *buf = (u8 *) bh->buf;
+
+ static char vendor_id[] = "Linux ";
+ static char product_id[] = "File-Stor Gadget";
+
+ if (!fsg->curlun) { // Unsupported LUNs are okay
+ fsg->bad_lun_okay = 1;
+ memset(buf, 0, 36);
+ buf[0] = 0x7f; // Unsupported, no device-type
+ return 36;
+ }
+
+ memset(buf, 0, 8); // Non-removable, direct-access device
+ if (mod_data.removable)
+ buf[1] = 0x80;
+ buf[2] = 2; // ANSI SCSI level 2
+ buf[3] = 2; // SCSI-2 INQUIRY data format
+ buf[4] = 31; // Additional length
+ // No special options
+ sprintf(buf + 8, "%-8s%-16s%04x", vendor_id, product_id,
+ mod_data.release);
+ return 36;
+}
+
+
+static int do_request_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
+{
+ struct lun *curlun = fsg->curlun;
+ u8 *buf = (u8 *) bh->buf;
+ u32 sd, sdinfo;
+
+ /*
+ * From the SCSI-2 spec., section 7.9 (Unit attention condition):
+ *
+ * If a REQUEST SENSE command is received from an initiator
+ * with a pending unit attention condition (before the target
+ * generates the contingent allegiance condition), then the
+ * target shall either:
+ * a) report any pending sense data and preserve the unit
+ * attention condition on the logical unit, or,
+ * b) report the unit attention condition, may discard any
+ * pending sense data, and clear the unit attention
+ * condition on the logical unit for that initiator.
+ *
+ * FSG normally uses option a); enable this code to use option b).
+ */
+#if 0
+ if (curlun && curlun->unit_attention_data != SS_NO_SENSE) {
+ curlun->sense_data = curlun->unit_attention_data;
+ curlun->unit_attention_data = SS_NO_SENSE;
+ }
+#endif
+
+ if (!curlun) { // Unsupported LUNs are okay
+ fsg->bad_lun_okay = 1;
+ sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
+ sdinfo = 0;
+ } else {
+ sd = curlun->sense_data;
+ sdinfo = curlun->sense_data_info;
+ curlun->sense_data = SS_NO_SENSE;
+ curlun->sense_data_info = 0;
+ }
+
+ memset(buf, 0, 18);
+ buf[0] = 0x80 | 0x70; // Valid, current error
+ buf[2] = SK(sd);
+ put_be32(&buf[3], sdinfo); // Sense information
+ buf[7] = 18 - 8; // Additional sense length
+ buf[12] = ASC(sd);
+ buf[13] = ASCQ(sd);
+ return 18;
+}
+
+
+static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh)
+{
+ struct lun *curlun = fsg->curlun;
+ u32 lba = get_be32(&fsg->cmnd[2]);
+ int pmi = fsg->cmnd[8];
+ u8 *buf = (u8 *) bh->buf;
+
+ /* Check the PMI and LBA fields */
+ if (pmi > 1 || (pmi == 0 && lba != 0)) {
+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+ return -EINVAL;
+ }
+
+ put_be32(&buf[0], curlun->num_sectors - 1); // Max logical block
+ put_be32(&buf[4], 512); // Block length
+ return 8;
+}
+
+
+static int do_mode_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
+{
+ struct lun *curlun = fsg->curlun;
+ int mscmnd = fsg->cmnd[0];
+ u8 *buf = (u8 *) bh->buf;
+ u8 *buf0 = buf;
+ int pc, page_code;
+ int changeable_values, all_pages;
+ int valid_page = 0;
+ int len, limit;
+
+ if ((fsg->cmnd[1] & ~0x08) != 0) { // Mask away DBD
+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+ return -EINVAL;
+ }
+ pc = fsg->cmnd[2] >> 6;
+ page_code = fsg->cmnd[2] & 0x3f;
+ if (pc == 3) {
+ curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED;
+ return -EINVAL;
+ }
+ changeable_values = (pc == 1);
+ all_pages = (page_code == 0x3f);
+
+ /* Write the mode parameter header. Fixed values are: default
+ * medium type, no cache control (DPOFUA), and no block descriptors.
+ * The only variable value is the WriteProtect bit. We will fill in
+ * the mode data length later. */
+ memset(buf, 0, 8);
+ if (mscmnd == SC_MODE_SENSE_6) {
+ buf[2] = (curlun->ro ? 0x80 : 0x00); // WP, DPOFUA
+ buf += 4;
+ limit = 255;
+ } else { // SC_MODE_SENSE_10
+ buf[3] = (curlun->ro ? 0x80 : 0x00); // WP, DPOFUA
+ buf += 8;
+ limit = 65535; // Should really be mod_data.buflen
+ }
+
+ /* No block descriptors */
+
+ /* The mode pages, in numerical order. The only page we support
+ * is the Caching page. */
+ if (page_code == 0x08 || all_pages) {
+ valid_page = 1;
+ buf[0] = 0x08; // Page code
+ buf[1] = 10; // Page length
+ memset(buf+2, 0, 10); // None of the fields are changeable
+
+ if (!changeable_values) {
+ buf[2] = 0x04; // Write cache enable,
+ // Read cache not disabled
+ // No cache retention priorities
+ put_be16(&buf[4], 0xffff); // Don't disable prefetch
+ // Minimum prefetch = 0
+ put_be16(&buf[8], 0xffff); // Maximum prefetch
+ put_be16(&buf[10], 0xffff); // Maximum prefetch ceiling
+ }
+ buf += 12;
+ }
+
+ /* Check that a valid page was requested and the mode data length
+ * isn't too long. */
+ len = buf - buf0;
+ if (!valid_page || len > limit) {
+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+ return -EINVAL;
+ }
+
+ /* Store the mode data length */
+ if (mscmnd == SC_MODE_SENSE_6)
+ buf0[0] = len - 1;
+ else
+ put_be16(buf0, len - 2);
+ return len;
+}
+
+
+static int do_start_stop(struct fsg_dev *fsg)
+{
+ struct lun *curlun = fsg->curlun;
+ int loej, start;
+
+ if (!mod_data.removable) {
+ curlun->sense_data = SS_INVALID_COMMAND;
+ return -EINVAL;
+ }
+
+ // int immed = fsg->cmnd[1] & 0x01;
+ loej = fsg->cmnd[4] & 0x02;
+ start = fsg->cmnd[4] & 0x01;
+
+#ifdef CONFIG_USB_FILE_STORAGE_TEST
+ if ((fsg->cmnd[1] & ~0x01) != 0 || // Mask away Immed
+ (fsg->cmnd[4] & ~0x03) != 0) { // Mask LoEj, Start
+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+ return -EINVAL;
+ }
+
+ if (!start) {
+
+ /* Are we allowed to unload the media? */
+ if (curlun->prevent_medium_removal) {
+ LDBG(curlun, "unload attempt prevented\n");
+ curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED;
+ return -EINVAL;
+ }
+ if (loej) { // Simulate an unload/eject
+ up_read(&fsg->filesem);
+ down_write(&fsg->filesem);
+ close_backing_file(curlun);
+ up_write(&fsg->filesem);
+ down_read(&fsg->filesem);
+ }
+ } else {
+
+ /* Our emulation doesn't support mounting; the medium is
+ * available for use as soon as it is loaded. */
+ if (!backing_file_is_open(curlun)) {
+ curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
+ return -EINVAL;
+ }
+ }
+#endif
+ return 0;
+}
+
+
+static int do_prevent_allow(struct fsg_dev *fsg)
+{
+ struct lun *curlun = fsg->curlun;
+ int prevent;
+
+ if (!mod_data.removable) {
+ curlun->sense_data = SS_INVALID_COMMAND;
+ return -EINVAL;
+ }
+
+ prevent = fsg->cmnd[4] & 0x01;
+ if ((fsg->cmnd[4] & ~0x01) != 0) { // Mask away Prevent
+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+ return -EINVAL;
+ }
+
+ if (curlun->prevent_medium_removal && !prevent)
+ fsync_sub(curlun);
+ curlun->prevent_medium_removal = prevent;
+ return 0;
+}
+
+
+static int do_read_format_capacities(struct fsg_dev *fsg,
+ struct fsg_buffhd *bh)
+{
+ struct lun *curlun = fsg->curlun;
+ u8 *buf = (u8 *) bh->buf;
+
+ buf[0] = buf[1] = buf[2] = 0;
+ buf[3] = 8; // Only the Current/Maximum Capacity Descriptor
+ buf += 4;
+
+ put_be32(&buf[0], curlun->num_sectors); // Number of blocks
+ put_be32(&buf[4], 512); // Block length
+ buf[4] = 0x02; // Current capacity
+ return 12;
+}
+
+
+static int do_mode_select(struct fsg_dev *fsg, struct fsg_buffhd *bh)
+{
+ struct lun *curlun = fsg->curlun;
+
+ /* We don't support MODE SELECT */
+ curlun->sense_data = SS_INVALID_COMMAND;
+ return -EINVAL;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int halt_bulk_in_endpoint(struct fsg_dev *fsg)
+{
+ int rc;
+
+ rc = fsg_set_halt(fsg, fsg->bulk_in);
+ if (rc == -EAGAIN)
+ VDBG(fsg, "delayed bulk-in endpoint halt\n");
+ while (rc != 0) {
+ if (rc != -EAGAIN) {
+ WARN(fsg, "usb_ep_set_halt -> %d\n", rc);
+ rc = 0;
+ break;
+ }
+
+ /* Wait for a short time and then try again */
+ if (msleep_interruptible(100) != 0)
+ return -EINTR;
+ rc = usb_ep_set_halt(fsg->bulk_in);
+ }
+ return rc;
+}
+
+static int pad_with_zeros(struct fsg_dev *fsg)
+{
+ struct fsg_buffhd *bh = fsg->next_buffhd_to_fill;
+ u32 nkeep = bh->inreq->length;
+ u32 nsend;
+ int rc;
+
+ bh->state = BUF_STATE_EMPTY; // For the first iteration
+ fsg->usb_amount_left = nkeep + fsg->residue;
+ while (fsg->usb_amount_left > 0) {
+
+ /* Wait for the next buffer to be free */
+ while (bh->state != BUF_STATE_EMPTY) {
+ if ((rc = sleep_thread(fsg)) != 0)
+ return rc;
+ }
+
+ nsend = min(fsg->usb_amount_left, (u32) mod_data.buflen);
+ memset(bh->buf + nkeep, 0, nsend - nkeep);
+ bh->inreq->length = nsend;
+ bh->inreq->zero = 0;
+ start_transfer(fsg, fsg->bulk_in, bh->inreq,
+ &bh->inreq_busy, &bh->state);
+ bh = fsg->next_buffhd_to_fill = bh->next;
+ fsg->usb_amount_left -= nsend;
+ nkeep = 0;
+ }
+ return 0;
+}
+
+static int throw_away_data(struct fsg_dev *fsg)
+{
+ struct fsg_buffhd *bh;
+ u32 amount;
+ int rc;
+
+ while ((bh = fsg->next_buffhd_to_drain)->state != BUF_STATE_EMPTY ||
+ fsg->usb_amount_left > 0) {
+
+ /* Throw away the data in a filled buffer */
+ if (bh->state == BUF_STATE_FULL) {
+ bh->state = BUF_STATE_EMPTY;
+ fsg->next_buffhd_to_drain = bh->next;
+
+ /* A short packet or an error ends everything */
+ if (bh->outreq->actual != bh->outreq->length ||
+ bh->outreq->status != 0) {
+ raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
+ return -EINTR;
+ }
+ continue;
+ }
+
+ /* Try to submit another request if we need one */
+ bh = fsg->next_buffhd_to_fill;
+ if (bh->state == BUF_STATE_EMPTY && fsg->usb_amount_left > 0) {
+ amount = min(fsg->usb_amount_left,
+ (u32) mod_data.buflen);
+
+ /* amount is always divisible by 512, hence by
+ * the bulk-out maxpacket size */
+ bh->outreq->length = bh->bulk_out_intended_length =
+ amount;
+ start_transfer(fsg, fsg->bulk_out, bh->outreq,
+ &bh->outreq_busy, &bh->state);
+ fsg->next_buffhd_to_fill = bh->next;
+ fsg->usb_amount_left -= amount;
+ continue;
+ }
+
+ /* Otherwise wait for something to happen */
+ if ((rc = sleep_thread(fsg)) != 0)
+ return rc;
+ }
+ return 0;
+}
+
+
+static int finish_reply(struct fsg_dev *fsg)
+{
+ struct fsg_buffhd *bh = fsg->next_buffhd_to_fill;
+ int rc = 0;
+
+ switch (fsg->data_dir) {
+ case DATA_DIR_NONE:
+ break; // Nothing to send
+
+ /* If we don't know whether the host wants to read or write,
+ * this must be CB or CBI with an unknown command. We mustn't
+ * try to send or receive any data. So stall both bulk pipes
+ * if we can and wait for a reset. */
+ case DATA_DIR_UNKNOWN:
+ if (mod_data.can_stall) {
+ fsg_set_halt(fsg, fsg->bulk_out);
+ rc = halt_bulk_in_endpoint(fsg);
+ }
+ break;
+
+ /* All but the last buffer of data must have already been sent */
+ case DATA_DIR_TO_HOST:
+ if (fsg->data_size == 0)
+ ; // Nothing to send
+
+ /* If there's no residue, simply send the last buffer */
+ else if (fsg->residue == 0) {
+ bh->inreq->zero = 0;
+ start_transfer(fsg, fsg->bulk_in, bh->inreq,
+ &bh->inreq_busy, &bh->state);
+ fsg->next_buffhd_to_fill = bh->next;
+ }
+
+ /* There is a residue. For CB and CBI, simply mark the end
+ * of the data with a short packet. However, if we are
+ * allowed to stall, there was no data at all (residue ==
+ * data_size), and the command failed (invalid LUN or
+ * sense data is set), then halt the bulk-in endpoint
+ * instead. */
+ else if (!transport_is_bbb()) {
+ if (mod_data.can_stall &&
+ fsg->residue == fsg->data_size &&
+ (!fsg->curlun || fsg->curlun->sense_data != SS_NO_SENSE)) {
+ bh->state = BUF_STATE_EMPTY;
+ rc = halt_bulk_in_endpoint(fsg);
+ } else {
+ bh->inreq->zero = 1;
+ start_transfer(fsg, fsg->bulk_in, bh->inreq,
+ &bh->inreq_busy, &bh->state);
+ fsg->next_buffhd_to_fill = bh->next;
+ }
+ }
+
+ /* For Bulk-only, if we're allowed to stall then send the
+ * short packet and halt the bulk-in endpoint. If we can't
+ * stall, pad out the remaining data with 0's. */
+ else {
+ if (mod_data.can_stall) {
+ bh->inreq->zero = 1;
+ start_transfer(fsg, fsg->bulk_in, bh->inreq,
+ &bh->inreq_busy, &bh->state);
+ fsg->next_buffhd_to_fill = bh->next;
+ rc = halt_bulk_in_endpoint(fsg);
+ } else
+ rc = pad_with_zeros(fsg);
+ }
+ break;
+
+ /* We have processed all we want from the data the host has sent.
+ * There may still be outstanding bulk-out requests. */
+ case DATA_DIR_FROM_HOST:
+ if (fsg->residue == 0)
+ ; // Nothing to receive
+
+ /* Did the host stop sending unexpectedly early? */
+ else if (fsg->short_packet_received) {
+ raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
+ rc = -EINTR;
+ }
+
+ /* We haven't processed all the incoming data. Even though
+ * we may be allowed to stall, doing so would cause a race.
+ * The controller may already have ACK'ed all the remaining
+ * bulk-out packets, in which case the host wouldn't see a
+ * STALL. Not realizing the endpoint was halted, it wouldn't
+ * clear the halt -- leading to problems later on. */
+#if 0
+ else if (mod_data.can_stall) {
+ fsg_set_halt(fsg, fsg->bulk_out);
+ raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
+ rc = -EINTR;
+ }
+#endif
+
+ /* We can't stall. Read in the excess data and throw it
+ * all away. */
+ else
+ rc = throw_away_data(fsg);
+ break;
+ }
+ return rc;
+}
+
+
+static int send_status(struct fsg_dev *fsg)
+{
+ struct lun *curlun = fsg->curlun;
+ struct fsg_buffhd *bh;
+ int rc;
+ u8 status = USB_STATUS_PASS;
+ u32 sd, sdinfo = 0;
+
+ /* Wait for the next buffer to become available */
+ bh = fsg->next_buffhd_to_fill;
+ while (bh->state != BUF_STATE_EMPTY) {
+ if ((rc = sleep_thread(fsg)) != 0)
+ return rc;
+ }
+
+ if (curlun) {
+ sd = curlun->sense_data;
+ sdinfo = curlun->sense_data_info;
+ } else if (fsg->bad_lun_okay)
+ sd = SS_NO_SENSE;
+ else
+ sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
+
+ if (fsg->phase_error) {
+ DBG(fsg, "sending phase-error status\n");
+ status = USB_STATUS_PHASE_ERROR;
+ sd = SS_INVALID_COMMAND;
+ } else if (sd != SS_NO_SENSE) {
+ DBG(fsg, "sending command-failure status\n");
+ status = USB_STATUS_FAIL;
+ VDBG(fsg, " sense data: SK x%02x, ASC x%02x, ASCQ x%02x;"
+ " info x%x\n",
+ SK(sd), ASC(sd), ASCQ(sd), sdinfo);
+ }
+
+ if (transport_is_bbb()) {
+ struct bulk_cs_wrap *csw = (struct bulk_cs_wrap *) bh->buf;
+
+ /* Store and send the Bulk-only CSW */
+ csw->Signature = __constant_cpu_to_le32(USB_BULK_CS_SIG);
+ csw->Tag = fsg->tag;
+ csw->Residue = cpu_to_le32(fsg->residue);
+ csw->Status = status;
+
+ bh->inreq->length = USB_BULK_CS_WRAP_LEN;
+ bh->inreq->zero = 0;
+ start_transfer(fsg, fsg->bulk_in, bh->inreq,
+ &bh->inreq_busy, &bh->state);
+
+ } else if (mod_data.transport_type == USB_PR_CB) {
+
+ /* Control-Bulk transport has no status phase! */
+ return 0;
+
+ } else { // USB_PR_CBI
+ struct interrupt_data *buf = (struct interrupt_data *)
+ bh->buf;
+
+ /* Store and send the Interrupt data. UFI sends the ASC
+ * and ASCQ bytes. Everything else sends a Type (which
+ * is always 0) and the status Value. */
+ if (mod_data.protocol_type == USB_SC_UFI) {
+ buf->bType = ASC(sd);
+ buf->bValue = ASCQ(sd);
+ } else {
+ buf->bType = 0;
+ buf->bValue = status;
+ }
+ fsg->intreq->length = CBI_INTERRUPT_DATA_LEN;
+
+ fsg->intr_buffhd = bh; // Point to the right buffhd
+ fsg->intreq->buf = bh->inreq->buf;
+ fsg->intreq->dma = bh->inreq->dma;
+ fsg->intreq->context = bh;
+ start_transfer(fsg, fsg->intr_in, fsg->intreq,
+ &fsg->intreq_busy, &bh->state);
+ }
+
+ fsg->next_buffhd_to_fill = bh->next;
+ return 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* Check whether the command is properly formed and whether its data size
+ * and direction agree with the values we already have. */
+static int check_command(struct fsg_dev *fsg, int cmnd_size,
+ enum data_direction data_dir, unsigned int mask,
+ int needs_medium, const char *name)
+{
+ int i;
+ int lun = fsg->cmnd[1] >> 5;
+ static const char dirletter[4] = {'u', 'o', 'i', 'n'};
+ char hdlen[20];
+ struct lun *curlun;
+
+ /* Adjust the expected cmnd_size for protocol encapsulation padding.
+ * Transparent SCSI doesn't pad. */
+ if (protocol_is_scsi())
+ ;
+
+ /* There's some disagreement as to whether RBC pads commands or not.
+ * We'll play it safe and accept either form. */
+ else if (mod_data.protocol_type == USB_SC_RBC) {
+ if (fsg->cmnd_size == 12)
+ cmnd_size = 12;
+
+ /* All the other protocols pad to 12 bytes */
+ } else
+ cmnd_size = 12;
+
+ hdlen[0] = 0;
+ if (fsg->data_dir != DATA_DIR_UNKNOWN)
+ sprintf(hdlen, ", H%c=%u", dirletter[(int) fsg->data_dir],
+ fsg->data_size);
+ VDBG(fsg, "SCSI command: %s; Dc=%d, D%c=%u; Hc=%d%s\n",
+ name, cmnd_size, dirletter[(int) data_dir],
+ fsg->data_size_from_cmnd, fsg->cmnd_size, hdlen);
+
+ /* We can't reply at all until we know the correct data direction
+ * and size. */
+ if (fsg->data_size_from_cmnd == 0)
+ data_dir = DATA_DIR_NONE;
+ if (fsg->data_dir == DATA_DIR_UNKNOWN) { // CB or CBI
+ fsg->data_dir = data_dir;
+ fsg->data_size = fsg->data_size_from_cmnd;
+
+ } else { // Bulk-only
+ if (fsg->data_size < fsg->data_size_from_cmnd) {
+
+ /* Host data size < Device data size is a phase error.
+ * Carry out the command, but only transfer as much
+ * as we are allowed. */
+ fsg->data_size_from_cmnd = fsg->data_size;
+ fsg->phase_error = 1;
+ }
+ }
+ fsg->residue = fsg->usb_amount_left = fsg->data_size;
+
+ /* Conflicting data directions is a phase error */
+ if (fsg->data_dir != data_dir && fsg->data_size_from_cmnd > 0) {
+ fsg->phase_error = 1;
+ return -EINVAL;
+ }
+
+ /* Verify the length of the command itself */
+ if (cmnd_size != fsg->cmnd_size) {
+
+ /* Special case workaround: MS-Windows issues REQUEST SENSE
+ * with cbw->Length == 12 (it should be 6). */
+ if (fsg->cmnd[0] == SC_REQUEST_SENSE && fsg->cmnd_size == 12)
+ cmnd_size = fsg->cmnd_size;
+ else {
+ fsg->phase_error = 1;
+ return -EINVAL;
+ }
+ }
+
+ /* Check that the LUN values are oonsistent */
+ if (transport_is_bbb()) {
+ if (fsg->lun != lun)
+ DBG(fsg, "using LUN %d from CBW, "
+ "not LUN %d from CDB\n",
+ fsg->lun, lun);
+ } else
+ fsg->lun = lun; // Use LUN from the command
+
+ /* Check the LUN */
+ if (fsg->lun >= 0 && fsg->lun < fsg->nluns) {
+ fsg->curlun = curlun = &fsg->luns[fsg->lun];
+ if (fsg->cmnd[0] != SC_REQUEST_SENSE) {
+ curlun->sense_data = SS_NO_SENSE;
+ curlun->sense_data_info = 0;
+ }
+ } else {
+ fsg->curlun = curlun = NULL;
+ fsg->bad_lun_okay = 0;
+
+ /* INQUIRY and REQUEST SENSE commands are explicitly allowed
+ * to use unsupported LUNs; all others may not. */
+ if (fsg->cmnd[0] != SC_INQUIRY &&
+ fsg->cmnd[0] != SC_REQUEST_SENSE) {
+ DBG(fsg, "unsupported LUN %d\n", fsg->lun);
+ return -EINVAL;
+ }
+ }
+
+ /* If a unit attention condition exists, only INQUIRY and
+ * REQUEST SENSE commands are allowed; anything else must fail. */
+ if (curlun && curlun->unit_attention_data != SS_NO_SENSE &&
+ fsg->cmnd[0] != SC_INQUIRY &&
+ fsg->cmnd[0] != SC_REQUEST_SENSE) {
+ curlun->sense_data = curlun->unit_attention_data;
+ curlun->unit_attention_data = SS_NO_SENSE;
+ return -EINVAL;
+ }
+
+ /* Check that only command bytes listed in the mask are non-zero */
+ fsg->cmnd[1] &= 0x1f; // Mask away the LUN
+ for (i = 1; i < cmnd_size; ++i) {
+ if (fsg->cmnd[i] && !(mask & (1 << i))) {
+ if (curlun)
+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
+ return -EINVAL;
+ }
+ }
+
+ /* If the medium isn't mounted and the command needs to access
+ * it, return an error. */
+ if (curlun && !backing_file_is_open(curlun) && needs_medium) {
+ curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+
+static int do_scsi_command(struct fsg_dev *fsg)
+{
+ struct fsg_buffhd *bh;
+ int rc;
+ int reply = -EINVAL;
+ int i;
+ static char unknown[16];
+
+ dump_cdb(fsg);
+
+ /* Wait for the next buffer to become available for data or status */
+ bh = fsg->next_buffhd_to_drain = fsg->next_buffhd_to_fill;
+ while (bh->state != BUF_STATE_EMPTY) {
+ if ((rc = sleep_thread(fsg)) != 0)
+ return rc;
+ }
+ fsg->phase_error = 0;
+ fsg->short_packet_received = 0;
+
+ down_read(&fsg->filesem); // We're using the backing file
+ switch (fsg->cmnd[0]) {
+
+ case SC_INQUIRY:
+ fsg->data_size_from_cmnd = fsg->cmnd[4];
+ if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
+ (1<<4), 0,
+ "INQUIRY")) == 0)
+ reply = do_inquiry(fsg, bh);
+ break;
+
+ case SC_MODE_SELECT_6:
+ fsg->data_size_from_cmnd = fsg->cmnd[4];
+ if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST,
+ (1<<1) | (1<<4), 0,
+ "MODE SELECT(6)")) == 0)
+ reply = do_mode_select(fsg, bh);
+ break;
+
+ case SC_MODE_SELECT_10:
+ fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]);
+ if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST,
+ (1<<1) | (3<<7), 0,
+ "MODE SELECT(10)")) == 0)
+ reply = do_mode_select(fsg, bh);
+ break;
+
+ case SC_MODE_SENSE_6:
+ fsg->data_size_from_cmnd = fsg->cmnd[4];
+ if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
+ (1<<1) | (1<<2) | (1<<4), 0,
+ "MODE SENSE(6)")) == 0)
+ reply = do_mode_sense(fsg, bh);
+ break;
+
+ case SC_MODE_SENSE_10:
+ fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]);
+ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
+ (1<<1) | (1<<2) | (3<<7), 0,
+ "MODE SENSE(10)")) == 0)
+ reply = do_mode_sense(fsg, bh);
+ break;
+
+ case SC_PREVENT_ALLOW_MEDIUM_REMOVAL:
+ fsg->data_size_from_cmnd = 0;
+ if ((reply = check_command(fsg, 6, DATA_DIR_NONE,
+ (1<<4), 0,
+ "PREVENT-ALLOW MEDIUM REMOVAL")) == 0)
+ reply = do_prevent_allow(fsg);
+ break;
+
+ case SC_READ_6:
+ i = fsg->cmnd[4];
+ fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << 9;
+ if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
+ (7<<1) | (1<<4), 1,
+ "READ(6)")) == 0)
+ reply = do_read(fsg);
+ break;
+
+ case SC_READ_10:
+ fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]) << 9;
+ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
+ (1<<1) | (0xf<<2) | (3<<7), 1,
+ "READ(10)")) == 0)
+ reply = do_read(fsg);
+ break;
+
+ case SC_READ_12:
+ fsg->data_size_from_cmnd = get_be32(&fsg->cmnd[6]) << 9;
+ if ((reply = check_command(fsg, 12, DATA_DIR_TO_HOST,
+ (1<<1) | (0xf<<2) | (0xf<<6), 1,
+ "READ(12)")) == 0)
+ reply = do_read(fsg);
+ break;
+
+ case SC_READ_CAPACITY:
+ fsg->data_size_from_cmnd = 8;
+ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
+ (0xf<<2) | (1<<8), 1,
+ "READ CAPACITY")) == 0)
+ reply = do_read_capacity(fsg, bh);
+ break;
+
+ case SC_READ_FORMAT_CAPACITIES:
+ fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]);
+ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
+ (3<<7), 1,
+ "READ FORMAT CAPACITIES")) == 0)
+ reply = do_read_format_capacities(fsg, bh);
+ break;
+
+ case SC_REQUEST_SENSE:
+ fsg->data_size_from_cmnd = fsg->cmnd[4];
+ if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
+ (1<<4), 0,
+ "REQUEST SENSE")) == 0)
+ reply = do_request_sense(fsg, bh);
+ break;
+
+ case SC_START_STOP_UNIT:
+ fsg->data_size_from_cmnd = 0;
+ if ((reply = check_command(fsg, 6, DATA_DIR_NONE,
+ (1<<1) | (1<<4), 0,
+ "START-STOP UNIT")) == 0)
+ reply = do_start_stop(fsg);
+ break;
+
+ case SC_SYNCHRONIZE_CACHE:
+ fsg->data_size_from_cmnd = 0;
+ if ((reply = check_command(fsg, 10, DATA_DIR_NONE,
+ (0xf<<2) | (3<<7), 1,
+ "SYNCHRONIZE CACHE")) == 0)
+ reply = do_synchronize_cache(fsg);
+ break;
+
+ case SC_TEST_UNIT_READY:
+ fsg->data_size_from_cmnd = 0;
+ reply = check_command(fsg, 6, DATA_DIR_NONE,
+ 0, 1,
+ "TEST UNIT READY");
+ break;
+
+ /* Although optional, this command is used by MS-Windows. We
+ * support a minimal version: BytChk must be 0. */
+ case SC_VERIFY:
+ fsg->data_size_from_cmnd = 0;
+ if ((reply = check_command(fsg, 10, DATA_DIR_NONE,
+ (1<<1) | (0xf<<2) | (3<<7), 1,
+ "VERIFY")) == 0)
+ reply = do_verify(fsg);
+ break;
+
+ case SC_WRITE_6:
+ i = fsg->cmnd[4];
+ fsg->data_size_from_cmnd = (i == 0 ? 256 : i) << 9;
+ if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST,
+ (7<<1) | (1<<4), 1,
+ "WRITE(6)")) == 0)
+ reply = do_write(fsg);
+ break;
+
+ case SC_WRITE_10:
+ fsg->data_size_from_cmnd = get_be16(&fsg->cmnd[7]) << 9;
+ if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST,
+ (1<<1) | (0xf<<2) | (3<<7), 1,
+ "WRITE(10)")) == 0)
+ reply = do_write(fsg);
+ break;
+
+ case SC_WRITE_12:
+ fsg->data_size_from_cmnd = get_be32(&fsg->cmnd[6]) << 9;
+ if ((reply = check_command(fsg, 12, DATA_DIR_FROM_HOST,
+ (1<<1) | (0xf<<2) | (0xf<<6), 1,
+ "WRITE(12)")) == 0)
+ reply = do_write(fsg);
+ break;
+
+ /* Some mandatory commands that we recognize but don't implement.
+ * They don't mean much in this setting. It's left as an exercise
+ * for anyone interested to implement RESERVE and RELEASE in terms
+ * of Posix locks. */
+ case SC_FORMAT_UNIT:
+ case SC_RELEASE:
+ case SC_RESERVE:
+ case SC_SEND_DIAGNOSTIC:
+ // Fall through
+
+ default:
+ fsg->data_size_from_cmnd = 0;
+ sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]);
+ if ((reply = check_command(fsg, fsg->cmnd_size,
+ DATA_DIR_UNKNOWN, 0xff, 0, unknown)) == 0) {
+ fsg->curlun->sense_data = SS_INVALID_COMMAND;
+ reply = -EINVAL;
+ }
+ break;
+ }
+ up_read(&fsg->filesem);
+
+ if (reply == -EINTR || signal_pending(current))
+ return -EINTR;
+
+ /* Set up the single reply buffer for finish_reply() */
+ if (reply == -EINVAL)
+ reply = 0; // Error reply length
+ if (reply >= 0 && fsg->data_dir == DATA_DIR_TO_HOST) {
+ reply = min((u32) reply, fsg->data_size_from_cmnd);
+ bh->inreq->length = reply;
+ bh->state = BUF_STATE_FULL;
+ fsg->residue -= reply;
+ } // Otherwise it's already set
+
+ return 0;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
+{
+ struct usb_request *req = bh->outreq;
+ struct bulk_cb_wrap *cbw = (struct bulk_cb_wrap *) req->buf;
+
+ /* Was this a real packet? */
+ if (req->status)
+ return -EINVAL;
+
+ /* Is the CBW valid? */
+ if (req->actual != USB_BULK_CB_WRAP_LEN ||
+ cbw->Signature != __constant_cpu_to_le32(
+ USB_BULK_CB_SIG)) {
+ DBG(fsg, "invalid CBW: len %u sig 0x%x\n",
+ req->actual,
+ le32_to_cpu(cbw->Signature));
+
+ /* The Bulk-only spec says we MUST stall the bulk pipes!
+ * If we want to avoid stalls, set a flag so that we will
+ * clear the endpoint halts at the next reset. */
+ if (!mod_data.can_stall)
+ set_bit(CLEAR_BULK_HALTS, &fsg->atomic_bitflags);
+ fsg_set_halt(fsg, fsg->bulk_out);
+ halt_bulk_in_endpoint(fsg);
+ return -EINVAL;
+ }
+
+ /* Is the CBW meaningful? */
+ if (cbw->Lun >= MAX_LUNS || cbw->Flags & ~USB_BULK_IN_FLAG ||
+ cbw->Length < 6 || cbw->Length > MAX_COMMAND_SIZE) {
+ DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, "
+ "cmdlen %u\n",
+ cbw->Lun, cbw->Flags, cbw->Length);
+
+ /* We can do anything we want here, so let's stall the
+ * bulk pipes if we are allowed to. */
+ if (mod_data.can_stall) {
+ fsg_set_halt(fsg, fsg->bulk_out);
+ halt_bulk_in_endpoint(fsg);
+ }
+ return -EINVAL;
+ }
+
+ /* Save the command for later */
+ fsg->cmnd_size = cbw->Length;
+ memcpy(fsg->cmnd, cbw->CDB, fsg->cmnd_size);
+ if (cbw->Flags & USB_BULK_IN_FLAG)
+ fsg->data_dir = DATA_DIR_TO_HOST;
+ else
+ fsg->data_dir = DATA_DIR_FROM_HOST;
+ fsg->data_size = le32_to_cpu(cbw->DataTransferLength);
+ if (fsg->data_size == 0)
+ fsg->data_dir = DATA_DIR_NONE;
+ fsg->lun = cbw->Lun;
+ fsg->tag = cbw->Tag;
+ return 0;
+}
+
+
+static int get_next_command(struct fsg_dev *fsg)
+{
+ struct fsg_buffhd *bh;
+ int rc = 0;
+
+ if (transport_is_bbb()) {
+
+ /* Wait for the next buffer to become available */
+ bh = fsg->next_buffhd_to_fill;
+ while (bh->state != BUF_STATE_EMPTY) {
+ if ((rc = sleep_thread(fsg)) != 0)
+ return rc;
+ }
+
+ /* Queue a request to read a Bulk-only CBW */
+ set_bulk_out_req_length(fsg, bh, USB_BULK_CB_WRAP_LEN);
+ start_transfer(fsg, fsg->bulk_out, bh->outreq,
+ &bh->outreq_busy, &bh->state);
+
+ /* We will drain the buffer in software, which means we
+ * can reuse it for the next filling. No need to advance
+ * next_buffhd_to_fill. */
+
+ /* Wait for the CBW to arrive */
+ while (bh->state != BUF_STATE_FULL) {
+ if ((rc = sleep_thread(fsg)) != 0)
+ return rc;
+ }
+ rc = received_cbw(fsg, bh);
+ bh->state = BUF_STATE_EMPTY;
+
+ } else { // USB_PR_CB or USB_PR_CBI
+
+ /* Wait for the next command to arrive */
+ while (fsg->cbbuf_cmnd_size == 0) {
+ if ((rc = sleep_thread(fsg)) != 0)
+ return rc;
+ }
+
+ /* Is the previous status interrupt request still busy?
+ * The host is allowed to skip reading the status,
+ * so we must cancel it. */
+ if (fsg->intreq_busy)
+ usb_ep_dequeue(fsg->intr_in, fsg->intreq);
+
+ /* Copy the command and mark the buffer empty */
+ fsg->data_dir = DATA_DIR_UNKNOWN;
+ spin_lock_irq(&fsg->lock);
+ fsg->cmnd_size = fsg->cbbuf_cmnd_size;
+ memcpy(fsg->cmnd, fsg->cbbuf_cmnd, fsg->cmnd_size);
+ fsg->cbbuf_cmnd_size = 0;
+ spin_unlock_irq(&fsg->lock);
+ }
+ return rc;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int enable_endpoint(struct fsg_dev *fsg, struct usb_ep *ep,
+ const struct usb_endpoint_descriptor *d)
+{
+ int rc;
+
+ ep->driver_data = fsg;
+ rc = usb_ep_enable(ep, d);
+ if (rc)
+ ERROR(fsg, "can't enable %s, result %d\n", ep->name, rc);
+ return rc;
+}
+
+static int alloc_request(struct fsg_dev *fsg, struct usb_ep *ep,
+ struct usb_request **preq)
+{
+ *preq = usb_ep_alloc_request(ep, GFP_ATOMIC);
+ if (*preq)
+ return 0;
+ ERROR(fsg, "can't allocate request for %s\n", ep->name);
+ return -ENOMEM;
+}
+
+/*
+ * Reset interface setting and re-init endpoint state (toggle etc).
+ * Call with altsetting < 0 to disable the interface. The only other
+ * available altsetting is 0, which enables the interface.
+ */
+static int do_set_interface(struct fsg_dev *fsg, int altsetting)
+{
+ int rc = 0;
+ int i;
+ const struct usb_endpoint_descriptor *d;
+
+ if (fsg->running)
+ DBG(fsg, "reset interface\n");
+
+reset:
+ /* Deallocate the requests */
+ for (i = 0; i < NUM_BUFFERS; ++i) {
+ struct fsg_buffhd *bh = &fsg->buffhds[i];
+
+ if (bh->inreq) {
+ usb_ep_free_request(fsg->bulk_in, bh->inreq);
+ bh->inreq = NULL;
+ }
+ if (bh->outreq) {
+ usb_ep_free_request(fsg->bulk_out, bh->outreq);
+ bh->outreq = NULL;
+ }
+ }
+ if (fsg->intreq) {
+ usb_ep_free_request(fsg->intr_in, fsg->intreq);
+ fsg->intreq = NULL;
+ }
+
+ /* Disable the endpoints */
+ if (fsg->bulk_in_enabled) {
+ usb_ep_disable(fsg->bulk_in);
+ fsg->bulk_in_enabled = 0;
+ }
+ if (fsg->bulk_out_enabled) {
+ usb_ep_disable(fsg->bulk_out);
+ fsg->bulk_out_enabled = 0;
+ }
+ if (fsg->intr_in_enabled) {
+ usb_ep_disable(fsg->intr_in);
+ fsg->intr_in_enabled = 0;
+ }
+
+ fsg->running = 0;
+ if (altsetting < 0 || rc != 0)
+ return rc;
+
+ DBG(fsg, "set interface %d\n", altsetting);
+
+ /* Enable the endpoints */
+ d = ep_desc(fsg->gadget, &fs_bulk_in_desc, &hs_bulk_in_desc);
+ if ((rc = enable_endpoint(fsg, fsg->bulk_in, d)) != 0)
+ goto reset;
+ fsg->bulk_in_enabled = 1;
+
+ d = ep_desc(fsg->gadget, &fs_bulk_out_desc, &hs_bulk_out_desc);
+ if ((rc = enable_endpoint(fsg, fsg->bulk_out, d)) != 0)
+ goto reset;
+ fsg->bulk_out_enabled = 1;
+ fsg->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize);
+
+ if (transport_is_cbi()) {
+ d = ep_desc(fsg->gadget, &fs_intr_in_desc, &hs_intr_in_desc);
+ if ((rc = enable_endpoint(fsg, fsg->intr_in, d)) != 0)
+ goto reset;
+ fsg->intr_in_enabled = 1;
+ }
+
+ /* Allocate the requests */
+ for (i = 0; i < NUM_BUFFERS; ++i) {
+ struct fsg_buffhd *bh = &fsg->buffhds[i];
+
+ if ((rc = alloc_request(fsg, fsg->bulk_in, &bh->inreq)) != 0)
+ goto reset;
+ if ((rc = alloc_request(fsg, fsg->bulk_out, &bh->outreq)) != 0)
+ goto reset;
+ bh->inreq->buf = bh->outreq->buf = bh->buf;
+ bh->inreq->dma = bh->outreq->dma = bh->dma;
+ bh->inreq->context = bh->outreq->context = bh;
+ bh->inreq->complete = bulk_in_complete;
+ bh->outreq->complete = bulk_out_complete;
+ }
+ if (transport_is_cbi()) {
+ if ((rc = alloc_request(fsg, fsg->intr_in, &fsg->intreq)) != 0)
+ goto reset;
+ fsg->intreq->complete = intr_in_complete;
+ }
+
+ fsg->running = 1;
+ for (i = 0; i < fsg->nluns; ++i)
+ fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED;
+ return rc;
+}
+
+
+/*
+ * Change our operational configuration. This code must agree with the code
+ * that returns config descriptors, and with interface altsetting code.
+ *
+ * It's also responsible for power management interactions. Some
+ * configurations might not work with our current power sources.
+ * For now we just assume the gadget is always self-powered.
+ */
+static int do_set_config(struct fsg_dev *fsg, u8 new_config)
+{
+ int rc = 0;
+
+ /* Disable the single interface */
+ if (fsg->config != 0) {
+ DBG(fsg, "reset config\n");
+ fsg->config = 0;
+ rc = do_set_interface(fsg, -1);
+ }
+
+ /* Enable the interface */
+ if (new_config != 0) {
+ fsg->config = new_config;
+ if ((rc = do_set_interface(fsg, 0)) != 0)
+ fsg->config = 0; // Reset on errors
+ else {
+ char *speed;
+
+ switch (fsg->gadget->speed) {
+ case USB_SPEED_LOW: speed = "low"; break;
+ case USB_SPEED_FULL: speed = "full"; break;
+ case USB_SPEED_HIGH: speed = "high"; break;
+ default: speed = "?"; break;
+ }
+ INFO(fsg, "%s speed config #%d\n", speed, fsg->config);
+ }
+ }
+ return rc;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static void handle_exception(struct fsg_dev *fsg)
+{
+ siginfo_t info;
+ int sig;
+ int i;
+ int num_active;
+ struct fsg_buffhd *bh;
+ enum fsg_state old_state;
+ u8 new_config;
+ struct lun *curlun;
+ unsigned int exception_req_tag;
+ int rc;
+
+ /* Clear the existing signals. Anything but SIGUSR1 is converted
+ * into a high-priority EXIT exception. */
+ for (;;) {
+ sig = dequeue_signal_lock(current, &fsg->thread_signal_mask,
+ &info);
+ if (!sig)
+ break;
+ if (sig != SIGUSR1) {
+ if (fsg->state < FSG_STATE_EXIT)
+ DBG(fsg, "Main thread exiting on signal\n");
+ raise_exception(fsg, FSG_STATE_EXIT);
+ }
+ }
+
+ /* Cancel all the pending transfers */
+ if (fsg->intreq_busy)
+ usb_ep_dequeue(fsg->intr_in, fsg->intreq);
+ for (i = 0; i < NUM_BUFFERS; ++i) {
+ bh = &fsg->buffhds[i];
+ if (bh->inreq_busy)
+ usb_ep_dequeue(fsg->bulk_in, bh->inreq);
+ if (bh->outreq_busy)
+ usb_ep_dequeue(fsg->bulk_out, bh->outreq);
+ }
+
+ /* Wait until everything is idle */
+ for (;;) {
+ num_active = fsg->intreq_busy;
+ for (i = 0; i < NUM_BUFFERS; ++i) {
+ bh = &fsg->buffhds[i];
+ num_active += bh->inreq_busy + bh->outreq_busy;
+ }
+ if (num_active == 0)
+ break;
+ if (sleep_thread(fsg))
+ return;
+ }
+
+ /* Clear out the controller's fifos */
+ if (fsg->bulk_in_enabled)
+ usb_ep_fifo_flush(fsg->bulk_in);
+ if (fsg->bulk_out_enabled)
+ usb_ep_fifo_flush(fsg->bulk_out);
+ if (fsg->intr_in_enabled)
+ usb_ep_fifo_flush(fsg->intr_in);
+
+ /* Reset the I/O buffer states and pointers, the SCSI
+ * state, and the exception. Then invoke the handler. */
+ spin_lock_irq(&fsg->lock);
+
+ for (i = 0; i < NUM_BUFFERS; ++i) {
+ bh = &fsg->buffhds[i];
+ bh->state = BUF_STATE_EMPTY;
+ }
+ fsg->next_buffhd_to_fill = fsg->next_buffhd_to_drain =
+ &fsg->buffhds[0];
+
+ exception_req_tag = fsg->exception_req_tag;
+ new_config = fsg->new_config;
+ old_state = fsg->state;
+
+ if (old_state == FSG_STATE_ABORT_BULK_OUT)
+ fsg->state = FSG_STATE_STATUS_PHASE;
+ else {
+ for (i = 0; i < fsg->nluns; ++i) {
+ curlun = &fsg->luns[i];
+ curlun->prevent_medium_removal = 0;
+ curlun->sense_data = curlun->unit_attention_data =
+ SS_NO_SENSE;
+ curlun->sense_data_info = 0;
+ }
+ fsg->state = FSG_STATE_IDLE;
+ }
+ spin_unlock_irq(&fsg->lock);
+
+ /* Carry out any extra actions required for the exception */
+ switch (old_state) {
+ default:
+ break;
+
+ case FSG_STATE_ABORT_BULK_OUT:
+ send_status(fsg);
+ spin_lock_irq(&fsg->lock);
+ if (fsg->state == FSG_STATE_STATUS_PHASE)
+ fsg->state = FSG_STATE_IDLE;
+ spin_unlock_irq(&fsg->lock);
+ break;
+
+ case FSG_STATE_RESET:
+ /* In case we were forced against our will to halt a
+ * bulk endpoint, clear the halt now. (The SuperH UDC
+ * requires this.) */
+ if (test_and_clear_bit(CLEAR_BULK_HALTS,
+ &fsg->atomic_bitflags)) {
+ usb_ep_clear_halt(fsg->bulk_in);
+ usb_ep_clear_halt(fsg->bulk_out);
+ }
+
+ if (transport_is_bbb()) {
+ if (fsg->ep0_req_tag == exception_req_tag)
+ ep0_queue(fsg); // Complete the status stage
+
+ } else if (transport_is_cbi())
+ send_status(fsg); // Status by interrupt pipe
+
+ /* Technically this should go here, but it would only be
+ * a waste of time. Ditto for the INTERFACE_CHANGE and
+ * CONFIG_CHANGE cases. */
+ // for (i = 0; i < fsg->nluns; ++i)
+ // fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED;
+ break;
+
+ case FSG_STATE_INTERFACE_CHANGE:
+ rc = do_set_interface(fsg, 0);
+ if (fsg->ep0_req_tag != exception_req_tag)
+ break;
+ if (rc != 0) // STALL on errors
+ fsg_set_halt(fsg, fsg->ep0);
+ else // Complete the status stage
+ ep0_queue(fsg);
+ break;
+
+ case FSG_STATE_CONFIG_CHANGE:
+ rc = do_set_config(fsg, new_config);
+ if (fsg->ep0_req_tag != exception_req_tag)
+ break;
+ if (rc != 0) // STALL on errors
+ fsg_set_halt(fsg, fsg->ep0);
+ else // Complete the status stage
+ ep0_queue(fsg);
+ break;
+
+ case FSG_STATE_DISCONNECT:
+ fsync_all(fsg);
+ do_set_config(fsg, 0); // Unconfigured state
+ break;
+
+ case FSG_STATE_EXIT:
+ case FSG_STATE_TERMINATED:
+ do_set_config(fsg, 0); // Free resources
+ spin_lock_irq(&fsg->lock);
+ fsg->state = FSG_STATE_TERMINATED; // Stop the thread
+ spin_unlock_irq(&fsg->lock);
+ break;
+ }
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int fsg_main_thread(void *fsg_)
+{
+ struct fsg_dev *fsg = (struct fsg_dev *) fsg_;
+
+ fsg->thread_task = current;
+
+ /* Release all our userspace resources */
+ daemonize("file-storage-gadget");
+
+ /* Allow the thread to be killed by a signal, but set the signal mask
+ * to block everything but INT, TERM, KILL, and USR1. */
+ siginitsetinv(&fsg->thread_signal_mask, sigmask(SIGINT) |
+ sigmask(SIGTERM) | sigmask(SIGKILL) |
+ sigmask(SIGUSR1));
+ sigprocmask(SIG_SETMASK, &fsg->thread_signal_mask, NULL);
+
+ /* Arrange for userspace references to be interpreted as kernel
+ * pointers. That way we can pass a kernel pointer to a routine
+ * that expects a __user pointer and it will work okay. */
+ set_fs(get_ds());
+
+ /* Wait for the gadget registration to finish up */
+ wait_for_completion(&fsg->thread_notifier);
+
+ /* The main loop */
+ while (fsg->state != FSG_STATE_TERMINATED) {
+ if (exception_in_progress(fsg) || signal_pending(current)) {
+ handle_exception(fsg);
+ continue;
+ }
+
+ if (!fsg->running) {
+ sleep_thread(fsg);
+ continue;
+ }
+
+ if (get_next_command(fsg))
+ continue;
+
+ spin_lock_irq(&fsg->lock);
+ if (!exception_in_progress(fsg))
+ fsg->state = FSG_STATE_DATA_PHASE;
+ spin_unlock_irq(&fsg->lock);
+
+ if (do_scsi_command(fsg) || finish_reply(fsg))
+ continue;
+
+ spin_lock_irq(&fsg->lock);
+ if (!exception_in_progress(fsg))
+ fsg->state = FSG_STATE_STATUS_PHASE;
+ spin_unlock_irq(&fsg->lock);
+
+ if (send_status(fsg))
+ continue;
+
+ spin_lock_irq(&fsg->lock);
+ if (!exception_in_progress(fsg))
+ fsg->state = FSG_STATE_IDLE;
+ spin_unlock_irq(&fsg->lock);
+ }
+
+ fsg->thread_task = NULL;
+ flush_signals(current);
+
+ /* In case we are exiting because of a signal, unregister the
+ * gadget driver and close the backing file. */
+ if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) {
+ usb_gadget_unregister_driver(&fsg_driver);
+ close_all_backing_files(fsg);
+ }
+
+ /* Let the unbind and cleanup routines know the thread has exited */
+ complete_and_exit(&fsg->thread_notifier, 0);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* If the next two routines are called while the gadget is registered,
+ * the caller must own fsg->filesem for writing. */
+
+static int open_backing_file(struct lun *curlun, const char *filename)
+{
+ int ro;
+ struct file *filp = NULL;
+ int rc = -EINVAL;
+ struct inode *inode = NULL;
+ loff_t size;
+ loff_t num_sectors;
+
+ /* R/W if we can, R/O if we must */
+ ro = curlun->ro;
+ if (!ro) {
+ filp = filp_open(filename, O_RDWR | O_LARGEFILE, 0);
+ if (-EROFS == PTR_ERR(filp))
+ ro = 1;
+ }
+ if (ro)
+ filp = filp_open(filename, O_RDONLY | O_LARGEFILE, 0);
+ if (IS_ERR(filp)) {
+ LINFO(curlun, "unable to open backing file: %s\n", filename);
+ return PTR_ERR(filp);
+ }
+
+ if (!(filp->f_mode & FMODE_WRITE))
+ ro = 1;
+
+ if (filp->f_dentry)
+ inode = filp->f_dentry->d_inode;
+ if (inode && S_ISBLK(inode->i_mode)) {
+ if (bdev_read_only(inode->i_bdev))
+ ro = 1;
+ } else if (!inode || !S_ISREG(inode->i_mode)) {
+ LINFO(curlun, "invalid file type: %s\n", filename);
+ goto out;
+ }
+
+ /* If we can't read the file, it's no good.
+ * If we can't write the file, use it read-only. */
+ if (!filp->f_op || !(filp->f_op->read || filp->f_op->aio_read)) {
+ LINFO(curlun, "file not readable: %s\n", filename);
+ goto out;
+ }
+ if (!(filp->f_op->write || filp->f_op->aio_write))
+ ro = 1;
+
+ size = i_size_read(inode->i_mapping->host);
+ if (size < 0) {
+ LINFO(curlun, "unable to find file size: %s\n", filename);
+ rc = (int) size;
+ goto out;
+ }
+ num_sectors = size >> 9; // File size in 512-byte sectors
+ if (num_sectors == 0) {
+ LINFO(curlun, "file too small: %s\n", filename);
+ rc = -ETOOSMALL;
+ goto out;
+ }
+
+ get_file(filp);
+ curlun->ro = ro;
+ curlun->filp = filp;
+ curlun->file_length = size;
+ curlun->num_sectors = num_sectors;
+ LDBG(curlun, "open backing file: %s\n", filename);
+ rc = 0;
+
+out:
+ filp_close(filp, current->files);
+ return rc;
+}
+
+
+static void close_backing_file(struct lun *curlun)
+{
+ if (curlun->filp) {
+ LDBG(curlun, "close backing file\n");
+ fput(curlun->filp);
+ curlun->filp = NULL;
+ }
+}
+
+static void close_all_backing_files(struct fsg_dev *fsg)
+{
+ int i;
+
+ for (i = 0; i < fsg->nluns; ++i)
+ close_backing_file(&fsg->luns[i]);
+}
+
+
+static ssize_t show_ro(struct device *dev, char *buf)
+{
+ struct lun *curlun = dev_to_lun(dev);
+
+ return sprintf(buf, "%d\n", curlun->ro);
+}
+
+static ssize_t show_file(struct device *dev, char *buf)
+{
+ struct lun *curlun = dev_to_lun(dev);
+ struct fsg_dev *fsg = (struct fsg_dev *) dev_get_drvdata(dev);
+ char *p;
+ ssize_t rc;
+
+ down_read(&fsg->filesem);
+ if (backing_file_is_open(curlun)) { // Get the complete pathname
+ p = d_path(curlun->filp->f_dentry, curlun->filp->f_vfsmnt,
+ buf, PAGE_SIZE - 1);
+ if (IS_ERR(p))
+ rc = PTR_ERR(p);
+ else {
+ rc = strlen(p);
+ memmove(buf, p, rc);
+ buf[rc] = '\n'; // Add a newline
+ buf[++rc] = 0;
+ }
+ } else { // No file, return 0 bytes
+ *buf = 0;
+ rc = 0;
+ }
+ up_read(&fsg->filesem);
+ return rc;
+}
+
+
+static ssize_t store_ro(struct device *dev, const char *buf, size_t count)
+{
+ ssize_t rc = count;
+ struct lun *curlun = dev_to_lun(dev);
+ struct fsg_dev *fsg = (struct fsg_dev *) dev_get_drvdata(dev);
+ int i;
+
+ if (sscanf(buf, "%d", &i) != 1)
+ return -EINVAL;
+
+ /* Allow the write-enable status to change only while the backing file
+ * is closed. */
+ down_read(&fsg->filesem);
+ if (backing_file_is_open(curlun)) {
+ LDBG(curlun, "read-only status change prevented\n");
+ rc = -EBUSY;
+ } else {
+ curlun->ro = !!i;
+ LDBG(curlun, "read-only status set to %d\n", curlun->ro);
+ }
+ up_read(&fsg->filesem);
+ return rc;
+}
+
+static ssize_t store_file(struct device *dev, const char *buf, size_t count)
+{
+ struct lun *curlun = dev_to_lun(dev);
+ struct fsg_dev *fsg = (struct fsg_dev *) dev_get_drvdata(dev);
+ int rc = 0;
+
+ if (curlun->prevent_medium_removal && backing_file_is_open(curlun)) {
+ LDBG(curlun, "eject attempt prevented\n");
+ return -EBUSY; // "Door is locked"
+ }
+
+ /* Remove a trailing newline */
+ if (count > 0 && buf[count-1] == '\n')
+ ((char *) buf)[count-1] = 0; // Ugh!
+
+ /* Eject current medium */
+ down_write(&fsg->filesem);
+ if (backing_file_is_open(curlun)) {
+ close_backing_file(curlun);
+ curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT;
+ }
+
+ /* Load new medium */
+ if (count > 0 && buf[0]) {
+ rc = open_backing_file(curlun, buf);
+ if (rc == 0)
+ curlun->unit_attention_data =
+ SS_NOT_READY_TO_READY_TRANSITION;
+ }
+ up_write(&fsg->filesem);
+ return (rc < 0 ? rc : count);
+}
+
+
+/* The write permissions and store_xxx pointers are set in fsg_bind() */
+static DEVICE_ATTR(ro, 0444, show_ro, NULL);
+static DEVICE_ATTR(file, 0444, show_file, NULL);
+
+
+/*-------------------------------------------------------------------------*/
+
+static void lun_release(struct device *dev)
+{
+ struct fsg_dev *fsg = (struct fsg_dev *) dev_get_drvdata(dev);
+
+ complete(&fsg->lun_released);
+}
+
+static void fsg_unbind(struct usb_gadget *gadget)
+{
+ struct fsg_dev *fsg = get_gadget_data(gadget);
+ int i;
+ struct lun *curlun;
+ struct usb_request *req = fsg->ep0req;
+
+ DBG(fsg, "unbind\n");
+ clear_bit(REGISTERED, &fsg->atomic_bitflags);
+
+ /* Unregister the sysfs attribute files and the LUNs */
+ init_completion(&fsg->lun_released);
+ for (i = 0; i < fsg->nluns; ++i) {
+ curlun = &fsg->luns[i];
+ if (curlun->registered) {
+ device_remove_file(&curlun->dev, &dev_attr_ro);
+ device_remove_file(&curlun->dev, &dev_attr_file);
+ device_unregister(&curlun->dev);
+ wait_for_completion(&fsg->lun_released);
+ curlun->registered = 0;
+ }
+ }
+
+ /* If the thread isn't already dead, tell it to exit now */
+ if (fsg->state != FSG_STATE_TERMINATED) {
+ raise_exception(fsg, FSG_STATE_EXIT);
+ wait_for_completion(&fsg->thread_notifier);
+
+ /* The cleanup routine waits for this completion also */
+ complete(&fsg->thread_notifier);
+ }
+
+ /* Free the data buffers */
+ for (i = 0; i < NUM_BUFFERS; ++i) {
+ struct fsg_buffhd *bh = &fsg->buffhds[i];
+
+ if (bh->buf)
+ usb_ep_free_buffer(fsg->bulk_in, bh->buf, bh->dma,
+ mod_data.buflen);
+ }
+
+ /* Free the request and buffer for endpoint 0 */
+ if (req) {
+ if (req->buf)
+ usb_ep_free_buffer(fsg->ep0, req->buf,
+ req->dma, EP0_BUFSIZE);
+ usb_ep_free_request(fsg->ep0, req);
+ }
+
+ set_gadget_data(gadget, NULL);
+}
+
+
+static int __init check_parameters(struct fsg_dev *fsg)
+{
+ int prot;
+
+ /* Store the default values */
+ mod_data.transport_type = USB_PR_BULK;
+ mod_data.transport_name = "Bulk-only";
+ mod_data.protocol_type = USB_SC_SCSI;
+ mod_data.protocol_name = "Transparent SCSI";
+
+ if (gadget_is_sh(fsg->gadget))
+ mod_data.can_stall = 0;
+
+ if (mod_data.release == 0xffff) { // Parameter wasn't set
+ if (gadget_is_net2280(fsg->gadget))
+ mod_data.release = 0x0301;
+ else if (gadget_is_dummy(fsg->gadget))
+ mod_data.release = 0x0302;
+ else if (gadget_is_pxa(fsg->gadget))
+ mod_data.release = 0x0303;
+ else if (gadget_is_sh(fsg->gadget))
+ mod_data.release = 0x0304;
+
+ /* The sa1100 controller is not supported */
+
+ else if (gadget_is_goku(fsg->gadget))
+ mod_data.release = 0x0306;
+ else if (gadget_is_mq11xx(fsg->gadget))
+ mod_data.release = 0x0307;
+ else if (gadget_is_omap(fsg->gadget))
+ mod_data.release = 0x0308;
+ else if (gadget_is_lh7a40x(fsg->gadget))
+ mod_data.release = 0x0309;
+ else if (gadget_is_n9604(fsg->gadget))
+ mod_data.release = 0x0310;
+ else if (gadget_is_pxa27x(fsg->gadget))
+ mod_data.release = 0x0311;
+ else if (gadget_is_s3c2410(gadget))
+ mod_data.release = 0x0312;
+ else if (gadget_is_at91(fsg->gadget))
+ mod_data.release = 0x0313;
+ else {
+ WARN(fsg, "controller '%s' not recognized\n",
+ fsg->gadget->name);
+ mod_data.release = 0x0399;
+ }
+ }
+
+ prot = simple_strtol(mod_data.protocol_parm, NULL, 0);
+
+#ifdef CONFIG_USB_FILE_STORAGE_TEST
+ if (strnicmp(mod_data.transport_parm, "BBB", 10) == 0) {
+ ; // Use default setting
+ } else if (strnicmp(mod_data.transport_parm, "CB", 10) == 0) {
+ mod_data.transport_type = USB_PR_CB;
+ mod_data.transport_name = "Control-Bulk";
+ } else if (strnicmp(mod_data.transport_parm, "CBI", 10) == 0) {
+ mod_data.transport_type = USB_PR_CBI;
+ mod_data.transport_name = "Control-Bulk-Interrupt";
+ } else {
+ ERROR(fsg, "invalid transport: %s\n", mod_data.transport_parm);
+ return -EINVAL;
+ }
+
+ if (strnicmp(mod_data.protocol_parm, "SCSI", 10) == 0 ||
+ prot == USB_SC_SCSI) {
+ ; // Use default setting
+ } else if (strnicmp(mod_data.protocol_parm, "RBC", 10) == 0 ||
+ prot == USB_SC_RBC) {
+ mod_data.protocol_type = USB_SC_RBC;
+ mod_data.protocol_name = "RBC";
+ } else if (strnicmp(mod_data.protocol_parm, "8020", 4) == 0 ||
+ strnicmp(mod_data.protocol_parm, "ATAPI", 10) == 0 ||
+ prot == USB_SC_8020) {
+ mod_data.protocol_type = USB_SC_8020;
+ mod_data.protocol_name = "8020i (ATAPI)";
+ } else if (strnicmp(mod_data.protocol_parm, "QIC", 3) == 0 ||
+ prot == USB_SC_QIC) {
+ mod_data.protocol_type = USB_SC_QIC;
+ mod_data.protocol_name = "QIC-157";
+ } else if (strnicmp(mod_data.protocol_parm, "UFI", 10) == 0 ||
+ prot == USB_SC_UFI) {
+ mod_data.protocol_type = USB_SC_UFI;
+ mod_data.protocol_name = "UFI";
+ } else if (strnicmp(mod_data.protocol_parm, "8070", 4) == 0 ||
+ prot == USB_SC_8070) {
+ mod_data.protocol_type = USB_SC_8070;
+ mod_data.protocol_name = "8070i";
+ } else {
+ ERROR(fsg, "invalid protocol: %s\n", mod_data.protocol_parm);
+ return -EINVAL;
+ }
+
+ mod_data.buflen &= PAGE_CACHE_MASK;
+ if (mod_data.buflen <= 0) {
+ ERROR(fsg, "invalid buflen\n");
+ return -ETOOSMALL;
+ }
+#endif /* CONFIG_USB_FILE_STORAGE_TEST */
+
+ return 0;
+}
+
+
+static int __init fsg_bind(struct usb_gadget *gadget)
+{
+ struct fsg_dev *fsg = the_fsg;
+ int rc;
+ int i;
+ struct lun *curlun;
+ struct usb_ep *ep;
+ struct usb_request *req;
+ char *pathbuf, *p;
+
+ fsg->gadget = gadget;
+ set_gadget_data(gadget, fsg);
+ fsg->ep0 = gadget->ep0;
+ fsg->ep0->driver_data = fsg;
+
+ if ((rc = check_parameters(fsg)) != 0)
+ goto out;
+
+ if (mod_data.removable) { // Enable the store_xxx attributes
+ dev_attr_ro.attr.mode = dev_attr_file.attr.mode = 0644;
+ dev_attr_ro.store = store_ro;
+ dev_attr_file.store = store_file;
+ }
+
+ /* Find out how many LUNs there should be */
+ i = mod_data.nluns;
+ if (i == 0)
+ i = max(mod_data.num_filenames, 1);
+ if (i > MAX_LUNS) {
+ ERROR(fsg, "invalid number of LUNs: %d\n", i);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ /* Create the LUNs, open their backing files, and register the
+ * LUN devices in sysfs. */
+ fsg->luns = kmalloc(i * sizeof(struct lun), GFP_KERNEL);
+ if (!fsg->luns) {
+ rc = -ENOMEM;
+ goto out;
+ }
+ memset(fsg->luns, 0, i * sizeof(struct lun));
+ fsg->nluns = i;
+
+ for (i = 0; i < fsg->nluns; ++i) {
+ curlun = &fsg->luns[i];
+ curlun->ro = ro[i];
+ curlun->dev.parent = &gadget->dev;
+ curlun->dev.driver = &fsg_driver.driver;
+ dev_set_drvdata(&curlun->dev, fsg);
+ snprintf(curlun->dev.bus_id, BUS_ID_SIZE,
+ "%s-lun%d", gadget->dev.bus_id, i);
+
+ if ((rc = device_register(&curlun->dev)) != 0)
+ INFO(fsg, "failed to register LUN%d: %d\n", i, rc);
+ else {
+ curlun->registered = 1;
+ curlun->dev.release = lun_release;
+ device_create_file(&curlun->dev, &dev_attr_ro);
+ device_create_file(&curlun->dev, &dev_attr_file);
+ }
+
+ if (file[i] && *file[i]) {
+ if ((rc = open_backing_file(curlun, file[i])) != 0)
+ goto out;
+ } else if (!mod_data.removable) {
+ ERROR(fsg, "no file given for LUN%d\n", i);
+ rc = -EINVAL;
+ goto out;
+ }
+ }
+
+ /* Find all the endpoints we will use */
+ usb_ep_autoconfig_reset(gadget);
+ ep = usb_ep_autoconfig(gadget, &fs_bulk_in_desc);
+ if (!ep)
+ goto autoconf_fail;
+ ep->driver_data = fsg; // claim the endpoint
+ fsg->bulk_in = ep;
+
+ ep = usb_ep_autoconfig(gadget, &fs_bulk_out_desc);
+ if (!ep)
+ goto autoconf_fail;
+ ep->driver_data = fsg; // claim the endpoint
+ fsg->bulk_out = ep;
+
+ if (transport_is_cbi()) {
+ ep = usb_ep_autoconfig(gadget, &fs_intr_in_desc);
+ if (!ep)
+ goto autoconf_fail;
+ ep->driver_data = fsg; // claim the endpoint
+ fsg->intr_in = ep;
+ }
+
+ /* Fix up the descriptors */
+ device_desc.bMaxPacketSize0 = fsg->ep0->maxpacket;
+ device_desc.idVendor = cpu_to_le16(mod_data.vendor);
+ device_desc.idProduct = cpu_to_le16(mod_data.product);
+ device_desc.bcdDevice = cpu_to_le16(mod_data.release);
+
+ i = (transport_is_cbi() ? 3 : 2); // Number of endpoints
+ intf_desc.bNumEndpoints = i;
+ intf_desc.bInterfaceSubClass = mod_data.protocol_type;
+ intf_desc.bInterfaceProtocol = mod_data.transport_type;
+ fs_function[i + FS_FUNCTION_PRE_EP_ENTRIES] = NULL;
+
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+ hs_function[i + HS_FUNCTION_PRE_EP_ENTRIES] = NULL;
+
+ /* Assume ep0 uses the same maxpacket value for both speeds */
+ dev_qualifier.bMaxPacketSize0 = fsg->ep0->maxpacket;
+
+ /* Assume that all endpoint addresses are the same for both speeds */
+ hs_bulk_in_desc.bEndpointAddress = fs_bulk_in_desc.bEndpointAddress;
+ hs_bulk_out_desc.bEndpointAddress = fs_bulk_out_desc.bEndpointAddress;
+ hs_intr_in_desc.bEndpointAddress = fs_intr_in_desc.bEndpointAddress;
+#endif
+
+ if (gadget->is_otg) {
+ otg_desc.bmAttributes |= USB_OTG_HNP,
+ config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ }
+
+ rc = -ENOMEM;
+
+ /* Allocate the request and buffer for endpoint 0 */
+ fsg->ep0req = req = usb_ep_alloc_request(fsg->ep0, GFP_KERNEL);
+ if (!req)
+ goto out;
+ req->buf = usb_ep_alloc_buffer(fsg->ep0, EP0_BUFSIZE,
+ &req->dma, GFP_KERNEL);
+ if (!req->buf)
+ goto out;
+ req->complete = ep0_complete;
+
+ /* Allocate the data buffers */
+ for (i = 0; i < NUM_BUFFERS; ++i) {
+ struct fsg_buffhd *bh = &fsg->buffhds[i];
+
+ bh->buf = usb_ep_alloc_buffer(fsg->bulk_in, mod_data.buflen,
+ &bh->dma, GFP_KERNEL);
+ if (!bh->buf)
+ goto out;
+ bh->next = bh + 1;
+ }
+ fsg->buffhds[NUM_BUFFERS - 1].next = &fsg->buffhds[0];
+
+ /* This should reflect the actual gadget power source */
+ usb_gadget_set_selfpowered(gadget);
+
+ snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
+ system_utsname.sysname, system_utsname.release,
+ gadget->name);
+
+ /* On a real device, serial[] would be loaded from permanent
+ * storage. We just encode it from the driver version string. */
+ for (i = 0; i < sizeof(serial) - 2; i += 2) {
+ unsigned char c = DRIVER_VERSION[i / 2];
+
+ if (!c)
+ break;
+ sprintf(&serial[i], "%02X", c);
+ }
+
+ if ((rc = kernel_thread(fsg_main_thread, fsg, (CLONE_VM | CLONE_FS |
+ CLONE_FILES))) < 0)
+ goto out;
+ fsg->thread_pid = rc;
+
+ INFO(fsg, DRIVER_DESC ", version: " DRIVER_VERSION "\n");
+ INFO(fsg, "Number of LUNs=%d\n", fsg->nluns);
+
+ pathbuf = kmalloc(PATH_MAX, GFP_KERNEL);
+ for (i = 0; i < fsg->nluns; ++i) {
+ curlun = &fsg->luns[i];
+ if (backing_file_is_open(curlun)) {
+ p = NULL;
+ if (pathbuf) {
+ p = d_path(curlun->filp->f_dentry,
+ curlun->filp->f_vfsmnt,
+ pathbuf, PATH_MAX);
+ if (IS_ERR(p))
+ p = NULL;
+ }
+ LINFO(curlun, "ro=%d, file: %s\n",
+ curlun->ro, (p ? p : "(error)"));
+ }
+ }
+ kfree(pathbuf);
+
+ DBG(fsg, "transport=%s (x%02x)\n",
+ mod_data.transport_name, mod_data.transport_type);
+ DBG(fsg, "protocol=%s (x%02x)\n",
+ mod_data.protocol_name, mod_data.protocol_type);
+ DBG(fsg, "VendorID=x%04x, ProductID=x%04x, Release=x%04x\n",
+ mod_data.vendor, mod_data.product, mod_data.release);
+ DBG(fsg, "removable=%d, stall=%d, buflen=%u\n",
+ mod_data.removable, mod_data.can_stall,
+ mod_data.buflen);
+ DBG(fsg, "I/O thread pid: %d\n", fsg->thread_pid);
+ return 0;
+
+autoconf_fail:
+ ERROR(fsg, "unable to autoconfigure all endpoints\n");
+ rc = -ENOTSUPP;
+
+out:
+ fsg->state = FSG_STATE_TERMINATED; // The thread is dead
+ fsg_unbind(gadget);
+ close_all_backing_files(fsg);
+ return rc;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static void fsg_suspend(struct usb_gadget *gadget)
+{
+ struct fsg_dev *fsg = get_gadget_data(gadget);
+
+ DBG(fsg, "suspend\n");
+ set_bit(SUSPENDED, &fsg->atomic_bitflags);
+}
+
+static void fsg_resume(struct usb_gadget *gadget)
+{
+ struct fsg_dev *fsg = get_gadget_data(gadget);
+
+ DBG(fsg, "resume\n");
+ clear_bit(SUSPENDED, &fsg->atomic_bitflags);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_gadget_driver fsg_driver = {
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+ .speed = USB_SPEED_HIGH,
+#else
+ .speed = USB_SPEED_FULL,
+#endif
+ .function = (char *) longname,
+ .bind = fsg_bind,
+ .unbind = fsg_unbind,
+ .disconnect = fsg_disconnect,
+ .setup = fsg_setup,
+ .suspend = fsg_suspend,
+ .resume = fsg_resume,
+
+ .driver = {
+ .name = (char *) shortname,
+ // .release = ...
+ // .suspend = ...
+ // .resume = ...
+ },
+};
+
+
+static int __init fsg_alloc(void)
+{
+ struct fsg_dev *fsg;
+
+ fsg = kmalloc(sizeof *fsg, GFP_KERNEL);
+ if (!fsg)
+ return -ENOMEM;
+ memset(fsg, 0, sizeof *fsg);
+ spin_lock_init(&fsg->lock);
+ init_rwsem(&fsg->filesem);
+ init_waitqueue_head(&fsg->thread_wqh);
+ init_completion(&fsg->thread_notifier);
+
+ the_fsg = fsg;
+ return 0;
+}
+
+
+static void fsg_free(struct fsg_dev *fsg)
+{
+ kfree(fsg->luns);
+ kfree(fsg);
+}
+
+
+static int __init fsg_init(void)
+{
+ int rc;
+ struct fsg_dev *fsg;
+
+ if ((rc = fsg_alloc()) != 0)
+ return rc;
+ fsg = the_fsg;
+ if ((rc = usb_gadget_register_driver(&fsg_driver)) != 0) {
+ fsg_free(fsg);
+ return rc;
+ }
+ set_bit(REGISTERED, &fsg->atomic_bitflags);
+
+ /* Tell the thread to start working */
+ complete(&fsg->thread_notifier);
+ return 0;
+}
+module_init(fsg_init);
+
+
+static void __exit fsg_cleanup(void)
+{
+ struct fsg_dev *fsg = the_fsg;
+
+ /* Unregister the driver iff the thread hasn't already done so */
+ if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags))
+ usb_gadget_unregister_driver(&fsg_driver);
+
+ /* Wait for the thread to finish up */
+ wait_for_completion(&fsg->thread_notifier);
+
+ close_all_backing_files(fsg);
+ fsg_free(fsg);
+}
+module_exit(fsg_cleanup);
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
new file mode 100644
index 00000000000..ea2eb52c766
--- /dev/null
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -0,0 +1,92 @@
+/*
+ * USB device controllers have lots of quirks. Use these macros in
+ * gadget drivers or other code that needs to deal with them, and which
+ * autoconfigures instead of using early binding to the hardware.
+ *
+ * This could eventually work like the ARM mach_is_*() stuff, driven by
+ * some config file that gets updated as new hardware is supported.
+ *
+ * NOTE: some of these controller drivers may not be available yet.
+ */
+#ifdef CONFIG_USB_GADGET_NET2280
+#define gadget_is_net2280(g) !strcmp("net2280", (g)->name)
+#else
+#define gadget_is_net2280(g) 0
+#endif
+
+#ifdef CONFIG_USB_GADGET_DUMMY_HCD
+#define gadget_is_dummy(g) !strcmp("dummy_udc", (g)->name)
+#else
+#define gadget_is_dummy(g) 0
+#endif
+
+#ifdef CONFIG_USB_GADGET_PXA2XX
+#define gadget_is_pxa(g) !strcmp("pxa2xx_udc", (g)->name)
+#else
+#define gadget_is_pxa(g) 0
+#endif
+
+#ifdef CONFIG_USB_GADGET_GOKU
+#define gadget_is_goku(g) !strcmp("goku_udc", (g)->name)
+#else
+#define gadget_is_goku(g) 0
+#endif
+
+#ifdef CONFIG_USB_GADGET_SUPERH
+#define gadget_is_sh(g) !strcmp("sh_udc", (g)->name)
+#else
+#define gadget_is_sh(g) 0
+#endif
+
+#ifdef CONFIG_USB_GADGET_SA1100
+#define gadget_is_sa1100(g) !strcmp("sa1100_udc", (g)->name)
+#else
+#define gadget_is_sa1100(g) 0
+#endif
+
+#ifdef CONFIG_USB_GADGET_LH7A40X
+#define gadget_is_lh7a40x(g) !strcmp("lh7a40x_udc", (g)->name)
+#else
+#define gadget_is_lh7a40x(g) 0
+#endif
+
+#ifdef CONFIG_USB_GADGET_MQ11XX
+#define gadget_is_mq11xx(g) !strcmp("mq11xx_udc", (g)->name)
+#else
+#define gadget_is_mq11xx(g) 0
+#endif
+
+#ifdef CONFIG_USB_GADGET_OMAP
+#define gadget_is_omap(g) !strcmp("omap_udc", (g)->name)
+#else
+#define gadget_is_omap(g) 0
+#endif
+
+#ifdef CONFIG_USB_GADGET_N9604
+#define gadget_is_n9604(g) !strcmp("n9604_udc", (g)->name)
+#else
+#define gadget_is_n9604(g) 0
+#endif
+
+#ifdef CONFIG_USB_GADGET_PXA27X
+#define gadget_is_pxa27x(g) !strcmp("pxa27x_udc", (g)->name)
+#else
+#define gadget_is_pxa27x(g) 0
+#endif
+
+#ifdef CONFIG_USB_GADGET_S3C2410
+#define gadget_is_s3c2410(g) !strcmp("s3c2410_udc", (g)->name)
+#else
+#define gadget_is_s3c2410(g) 0
+#endif
+
+#ifdef CONFIG_USB_GADGET_AT91
+#define gadget_is_at91(g) !strcmp("at91_udc", (g)->name)
+#else
+#define gadget_is_at91(g) 0
+#endif
+
+// CONFIG_USB_GADGET_SX2
+// CONFIG_USB_GADGET_AU1X00
+// ...
+
diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c
new file mode 100644
index 00000000000..005db7cca29
--- /dev/null
+++ b/drivers/usb/gadget/goku_udc.c
@@ -0,0 +1,1984 @@
+/*
+ * Toshiba TC86C001 ("Goku-S") USB Device Controller driver
+ *
+ * Copyright (C) 2000-2002 Lineo
+ * by Stuart Lynne, Tom Rushworth, and Bruce Balden
+ * Copyright (C) 2002 Toshiba Corporation
+ * Copyright (C) 2003 MontaVista Software (source@mvista.com)
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/*
+ * This device has ep0 and three semi-configurable bulk/interrupt endpoints.
+ *
+ * - Endpoint numbering is fixed: ep{1,2,3}-bulk
+ * - Gadget drivers can choose ep maxpacket (8/16/32/64)
+ * - Gadget drivers can choose direction (IN, OUT)
+ * - DMA works with ep1 (OUT transfers) and ep2 (IN transfers).
+ */
+
+#undef DEBUG
+// #define VERBOSE /* extra debug messages (success too) */
+// #define USB_TRACE /* packet-level success messages */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/proc_fs.h>
+#include <linux/device.h>
+#include <linux/usb_ch9.h>
+#include <linux/usb_gadget.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/unaligned.h>
+
+
+#include "goku_udc.h"
+
+#define DRIVER_DESC "TC86C001 USB Device Controller"
+#define DRIVER_VERSION "30-Oct 2003"
+
+#define DMA_ADDR_INVALID (~(dma_addr_t)0)
+
+static const char driver_name [] = "goku_udc";
+static const char driver_desc [] = DRIVER_DESC;
+
+MODULE_AUTHOR("source@mvista.com");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+
+/*
+ * IN dma behaves ok under testing, though the IN-dma abort paths don't
+ * seem to behave quite as expected. Used by default.
+ *
+ * OUT dma documents design problems handling the common "short packet"
+ * transfer termination policy; it couldn't enabled by default, even
+ * if the OUT-dma abort problems had a resolution.
+ */
+static unsigned use_dma = 1;
+
+#if 0
+//#include <linux/moduleparam.h>
+/* "modprobe goku_udc use_dma=1" etc
+ * 0 to disable dma
+ * 1 to use IN dma only (normal operation)
+ * 2 to use IN and OUT dma
+ */
+module_param(use_dma, uint, S_IRUGO);
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+static void nuke(struct goku_ep *, int status);
+
+static inline void
+command(struct goku_udc_regs __iomem *regs, int command, unsigned epnum)
+{
+ writel(COMMAND_EP(epnum) | command, &regs->Command);
+ udelay(300);
+}
+
+static int
+goku_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
+{
+ struct goku_udc *dev;
+ struct goku_ep *ep;
+ u32 mode;
+ u16 max;
+ unsigned long flags;
+
+ ep = container_of(_ep, struct goku_ep, ep);
+ if (!_ep || !desc || ep->desc
+ || desc->bDescriptorType != USB_DT_ENDPOINT)
+ return -EINVAL;
+ dev = ep->dev;
+ if (ep == &dev->ep[0])
+ return -EINVAL;
+ if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
+ return -ESHUTDOWN;
+ if (ep->num != (desc->bEndpointAddress & 0x0f))
+ return -EINVAL;
+
+ switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+ case USB_ENDPOINT_XFER_BULK:
+ case USB_ENDPOINT_XFER_INT:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if ((readl(ep->reg_status) & EPxSTATUS_EP_MASK)
+ != EPxSTATUS_EP_INVALID)
+ return -EBUSY;
+
+ /* enabling the no-toggle interrupt mode would need an api hook */
+ mode = 0;
+ max = le16_to_cpu(get_unaligned(&desc->wMaxPacketSize));
+ switch (max) {
+ case 64: mode++;
+ case 32: mode++;
+ case 16: mode++;
+ case 8: mode <<= 3;
+ break;
+ default:
+ return -EINVAL;
+ }
+ mode |= 2 << 1; /* bulk, or intr-with-toggle */
+
+ /* ep1/ep2 dma direction is chosen early; it works in the other
+ * direction, with pio. be cautious with out-dma.
+ */
+ ep->is_in = (USB_DIR_IN & desc->bEndpointAddress) != 0;
+ if (ep->is_in) {
+ mode |= 1;
+ ep->dma = (use_dma != 0) && (ep->num == UDC_MSTRD_ENDPOINT);
+ } else {
+ ep->dma = (use_dma == 2) && (ep->num == UDC_MSTWR_ENDPOINT);
+ if (ep->dma)
+ DBG(dev, "%s out-dma hides short packets\n",
+ ep->ep.name);
+ }
+
+ spin_lock_irqsave(&ep->dev->lock, flags);
+
+ /* ep1 and ep2 can do double buffering and/or dma */
+ if (ep->num < 3) {
+ struct goku_udc_regs __iomem *regs = ep->dev->regs;
+ u32 tmp;
+
+ /* double buffer except (for now) with pio in */
+ tmp = ((ep->dma || !ep->is_in)
+ ? 0x10 /* double buffered */
+ : 0x11 /* single buffer */
+ ) << ep->num;
+ tmp |= readl(&regs->EPxSingle);
+ writel(tmp, &regs->EPxSingle);
+
+ tmp = (ep->dma ? 0x10/*dma*/ : 0x11/*pio*/) << ep->num;
+ tmp |= readl(&regs->EPxBCS);
+ writel(tmp, &regs->EPxBCS);
+ }
+ writel(mode, ep->reg_mode);
+ command(ep->dev->regs, COMMAND_RESET, ep->num);
+ ep->ep.maxpacket = max;
+ ep->stopped = 0;
+ ep->desc = desc;
+ spin_unlock_irqrestore(&ep->dev->lock, flags);
+
+ DBG(dev, "enable %s %s %s maxpacket %u\n", ep->ep.name,
+ ep->is_in ? "IN" : "OUT",
+ ep->dma ? "dma" : "pio",
+ max);
+
+ return 0;
+}
+
+static void ep_reset(struct goku_udc_regs __iomem *regs, struct goku_ep *ep)
+{
+ struct goku_udc *dev = ep->dev;
+
+ if (regs) {
+ command(regs, COMMAND_INVALID, ep->num);
+ if (ep->num) {
+ if (ep->num == UDC_MSTWR_ENDPOINT)
+ dev->int_enable &= ~(INT_MSTWREND
+ |INT_MSTWRTMOUT);
+ else if (ep->num == UDC_MSTRD_ENDPOINT)
+ dev->int_enable &= ~INT_MSTRDEND;
+ dev->int_enable &= ~INT_EPxDATASET (ep->num);
+ } else
+ dev->int_enable &= ~INT_EP0;
+ writel(dev->int_enable, &regs->int_enable);
+ readl(&regs->int_enable);
+ if (ep->num < 3) {
+ struct goku_udc_regs __iomem *r = ep->dev->regs;
+ u32 tmp;
+
+ tmp = readl(&r->EPxSingle);
+ tmp &= ~(0x11 << ep->num);
+ writel(tmp, &r->EPxSingle);
+
+ tmp = readl(&r->EPxBCS);
+ tmp &= ~(0x11 << ep->num);
+ writel(tmp, &r->EPxBCS);
+ }
+ /* reset dma in case we're still using it */
+ if (ep->dma) {
+ u32 master;
+
+ master = readl(&regs->dma_master) & MST_RW_BITS;
+ if (ep->num == UDC_MSTWR_ENDPOINT) {
+ master &= ~MST_W_BITS;
+ master |= MST_WR_RESET;
+ } else {
+ master &= ~MST_R_BITS;
+ master |= MST_RD_RESET;
+ }
+ writel(master, &regs->dma_master);
+ }
+ }
+
+ ep->ep.maxpacket = MAX_FIFO_SIZE;
+ ep->desc = NULL;
+ ep->stopped = 1;
+ ep->irqs = 0;
+ ep->dma = 0;
+}
+
+static int goku_ep_disable(struct usb_ep *_ep)
+{
+ struct goku_ep *ep;
+ struct goku_udc *dev;
+ unsigned long flags;
+
+ ep = container_of(_ep, struct goku_ep, ep);
+ if (!_ep || !ep->desc)
+ return -ENODEV;
+ dev = ep->dev;
+ if (dev->ep0state == EP0_SUSPEND)
+ return -EBUSY;
+
+ VDBG(dev, "disable %s\n", _ep->name);
+
+ spin_lock_irqsave(&dev->lock, flags);
+ nuke(ep, -ESHUTDOWN);
+ ep_reset(dev->regs, ep);
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_request *
+goku_alloc_request(struct usb_ep *_ep, int gfp_flags)
+{
+ struct goku_request *req;
+
+ if (!_ep)
+ return NULL;
+ req = kmalloc(sizeof *req, gfp_flags);
+ if (!req)
+ return NULL;
+
+ memset(req, 0, sizeof *req);
+ req->req.dma = DMA_ADDR_INVALID;
+ INIT_LIST_HEAD(&req->queue);
+ return &req->req;
+}
+
+static void
+goku_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct goku_request *req;
+
+ if (!_ep || !_req)
+ return;
+
+ req = container_of(_req, struct goku_request, req);
+ WARN_ON(!list_empty(&req->queue));
+ kfree(req);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#undef USE_KMALLOC
+
+/* many common platforms have dma-coherent caches, which means that it's
+ * safe to use kmalloc() memory for all i/o buffers without using any
+ * cache flushing calls. (unless you're trying to share cache lines
+ * between dma and non-dma activities, which is a slow idea in any case.)
+ *
+ * other platforms need more care, with 2.6 having a moderately general
+ * solution except for the common "buffer is smaller than a page" case.
+ */
+#if defined(CONFIG_X86)
+#define USE_KMALLOC
+
+#elif defined(CONFIG_MIPS) && !defined(CONFIG_NONCOHERENT_IO)
+#define USE_KMALLOC
+
+#elif defined(CONFIG_PPC) && !defined(CONFIG_NOT_COHERENT_CACHE)
+#define USE_KMALLOC
+
+#endif
+
+/* allocating buffers this way eliminates dma mapping overhead, which
+ * on some platforms will mean eliminating a per-io buffer copy. with
+ * some kinds of system caches, further tweaks may still be needed.
+ */
+static void *
+goku_alloc_buffer(struct usb_ep *_ep, unsigned bytes,
+ dma_addr_t *dma, int gfp_flags)
+{
+ void *retval;
+ struct goku_ep *ep;
+
+ ep = container_of(_ep, struct goku_ep, ep);
+ if (!_ep)
+ return NULL;
+ *dma = DMA_ADDR_INVALID;
+
+#if defined(USE_KMALLOC)
+ retval = kmalloc(bytes, gfp_flags);
+ if (retval)
+ *dma = virt_to_phys(retval);
+#else
+ if (ep->dma) {
+ /* the main problem with this call is that it wastes memory
+ * on typical 1/N page allocations: it allocates 1-N pages.
+ */
+#warning Using dma_alloc_coherent even with buffers smaller than a page.
+ retval = dma_alloc_coherent(&ep->dev->pdev->dev,
+ bytes, dma, gfp_flags);
+ } else
+ retval = kmalloc(bytes, gfp_flags);
+#endif
+ return retval;
+}
+
+static void
+goku_free_buffer(struct usb_ep *_ep, void *buf, dma_addr_t dma, unsigned bytes)
+{
+ /* free memory into the right allocator */
+#ifndef USE_KMALLOC
+ if (dma != DMA_ADDR_INVALID) {
+ struct goku_ep *ep;
+
+ ep = container_of(_ep, struct goku_ep, ep);
+ if (!_ep)
+ return;
+ dma_free_coherent(&ep->dev->pdev->dev, bytes, buf, dma);
+ } else
+#endif
+ kfree (buf);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void
+done(struct goku_ep *ep, struct goku_request *req, int status)
+{
+ struct goku_udc *dev;
+ unsigned stopped = ep->stopped;
+
+ list_del_init(&req->queue);
+
+ if (likely(req->req.status == -EINPROGRESS))
+ req->req.status = status;
+ else
+ status = req->req.status;
+
+ dev = ep->dev;
+ if (req->mapped) {
+ pci_unmap_single(dev->pdev, req->req.dma, req->req.length,
+ ep->is_in ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
+ req->req.dma = DMA_ADDR_INVALID;
+ req->mapped = 0;
+ }
+
+#ifndef USB_TRACE
+ if (status && status != -ESHUTDOWN)
+#endif
+ VDBG(dev, "complete %s req %p stat %d len %u/%u\n",
+ ep->ep.name, &req->req, status,
+ req->req.actual, req->req.length);
+
+ /* don't modify queue heads during completion callback */
+ ep->stopped = 1;
+ spin_unlock(&dev->lock);
+ req->req.complete(&ep->ep, &req->req);
+ spin_lock(&dev->lock);
+ ep->stopped = stopped;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static inline int
+write_packet(u32 __iomem *fifo, u8 *buf, struct goku_request *req, unsigned max)
+{
+ unsigned length, count;
+
+ length = min(req->req.length - req->req.actual, max);
+ req->req.actual += length;
+
+ count = length;
+ while (likely(count--))
+ writel(*buf++, fifo);
+ return length;
+}
+
+// return: 0 = still running, 1 = completed, negative = errno
+static int write_fifo(struct goku_ep *ep, struct goku_request *req)
+{
+ struct goku_udc *dev = ep->dev;
+ u32 tmp;
+ u8 *buf;
+ unsigned count;
+ int is_last;
+
+ tmp = readl(&dev->regs->DataSet);
+ buf = req->req.buf + req->req.actual;
+ prefetch(buf);
+
+ dev = ep->dev;
+ if (unlikely(ep->num == 0 && dev->ep0state != EP0_IN))
+ return -EL2HLT;
+
+ /* NOTE: just single-buffered PIO-IN for now. */
+ if (unlikely((tmp & DATASET_A(ep->num)) != 0))
+ return 0;
+
+ /* clear our "packet available" irq */
+ if (ep->num != 0)
+ writel(~INT_EPxDATASET(ep->num), &dev->regs->int_status);
+
+ count = write_packet(ep->reg_fifo, buf, req, ep->ep.maxpacket);
+
+ /* last packet often short (sometimes a zlp, especially on ep0) */
+ if (unlikely(count != ep->ep.maxpacket)) {
+ writel(~(1<<ep->num), &dev->regs->EOP);
+ if (ep->num == 0) {
+ dev->ep[0].stopped = 1;
+ dev->ep0state = EP0_STATUS;
+ }
+ is_last = 1;
+ } else {
+ if (likely(req->req.length != req->req.actual)
+ || req->req.zero)
+ is_last = 0;
+ else
+ is_last = 1;
+ }
+#if 0 /* printk seemed to trash is_last...*/
+//#ifdef USB_TRACE
+ VDBG(dev, "wrote %s %u bytes%s IN %u left %p\n",
+ ep->ep.name, count, is_last ? "/last" : "",
+ req->req.length - req->req.actual, req);
+#endif
+
+ /* requests complete when all IN data is in the FIFO,
+ * or sometimes later, if a zlp was needed.
+ */
+ if (is_last) {
+ done(ep, req, 0);
+ return 1;
+ }
+
+ return 0;
+}
+
+static int read_fifo(struct goku_ep *ep, struct goku_request *req)
+{
+ struct goku_udc_regs __iomem *regs;
+ u32 size, set;
+ u8 *buf;
+ unsigned bufferspace, is_short, dbuff;
+
+ regs = ep->dev->regs;
+top:
+ buf = req->req.buf + req->req.actual;
+ prefetchw(buf);
+
+ if (unlikely(ep->num == 0 && ep->dev->ep0state != EP0_OUT))
+ return -EL2HLT;
+
+ dbuff = (ep->num == 1 || ep->num == 2);
+ do {
+ /* ack dataset irq matching the status we'll handle */
+ if (ep->num != 0)
+ writel(~INT_EPxDATASET(ep->num), &regs->int_status);
+
+ set = readl(&regs->DataSet) & DATASET_AB(ep->num);
+ size = readl(&regs->EPxSizeLA[ep->num]);
+ bufferspace = req->req.length - req->req.actual;
+
+ /* usually do nothing without an OUT packet */
+ if (likely(ep->num != 0 || bufferspace != 0)) {
+ if (unlikely(set == 0))
+ break;
+ /* use ep1/ep2 double-buffering for OUT */
+ if (!(size & PACKET_ACTIVE))
+ size = readl(&regs->EPxSizeLB[ep->num]);
+ if (!(size & PACKET_ACTIVE)) // "can't happen"
+ break;
+ size &= DATASIZE; /* EPxSizeH == 0 */
+
+ /* ep0out no-out-data case for set_config, etc */
+ } else
+ size = 0;
+
+ /* read all bytes from this packet */
+ req->req.actual += size;
+ is_short = (size < ep->ep.maxpacket);
+#ifdef USB_TRACE
+ VDBG(ep->dev, "read %s %u bytes%s OUT req %p %u/%u\n",
+ ep->ep.name, size, is_short ? "/S" : "",
+ req, req->req.actual, req->req.length);
+#endif
+ while (likely(size-- != 0)) {
+ u8 byte = (u8) readl(ep->reg_fifo);
+
+ if (unlikely(bufferspace == 0)) {
+ /* this happens when the driver's buffer
+ * is smaller than what the host sent.
+ * discard the extra data in this packet.
+ */
+ if (req->req.status != -EOVERFLOW)
+ DBG(ep->dev, "%s overflow %u\n",
+ ep->ep.name, size);
+ req->req.status = -EOVERFLOW;
+ } else {
+ *buf++ = byte;
+ bufferspace--;
+ }
+ }
+
+ /* completion */
+ if (unlikely(is_short || req->req.actual == req->req.length)) {
+ if (unlikely(ep->num == 0)) {
+ /* non-control endpoints now usable? */
+ if (ep->dev->req_config)
+ writel(ep->dev->configured
+ ? USBSTATE_CONFIGURED
+ : 0,
+ &regs->UsbState);
+ /* ep0out status stage */
+ writel(~(1<<0), &regs->EOP);
+ ep->stopped = 1;
+ ep->dev->ep0state = EP0_STATUS;
+ }
+ done(ep, req, 0);
+
+ /* empty the second buffer asap */
+ if (dbuff && !list_empty(&ep->queue)) {
+ req = list_entry(ep->queue.next,
+ struct goku_request, queue);
+ goto top;
+ }
+ return 1;
+ }
+ } while (dbuff);
+ return 0;
+}
+
+static inline void
+pio_irq_enable(struct goku_udc *dev,
+ struct goku_udc_regs __iomem *regs, int epnum)
+{
+ dev->int_enable |= INT_EPxDATASET (epnum);
+ writel(dev->int_enable, &regs->int_enable);
+ /* write may still be posted */
+}
+
+static inline void
+pio_irq_disable(struct goku_udc *dev,
+ struct goku_udc_regs __iomem *regs, int epnum)
+{
+ dev->int_enable &= ~INT_EPxDATASET (epnum);
+ writel(dev->int_enable, &regs->int_enable);
+ /* write may still be posted */
+}
+
+static inline void
+pio_advance(struct goku_ep *ep)
+{
+ struct goku_request *req;
+
+ if (unlikely(list_empty (&ep->queue)))
+ return;
+ req = list_entry(ep->queue.next, struct goku_request, queue);
+ (ep->is_in ? write_fifo : read_fifo)(ep, req);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+// return: 0 = q running, 1 = q stopped, negative = errno
+static int start_dma(struct goku_ep *ep, struct goku_request *req)
+{
+ struct goku_udc_regs __iomem *regs = ep->dev->regs;
+ u32 master;
+ u32 start = req->req.dma;
+ u32 end = start + req->req.length - 1;
+
+ master = readl(&regs->dma_master) & MST_RW_BITS;
+
+ /* re-init the bits affecting IN dma; careful with zlps */
+ if (likely(ep->is_in)) {
+ if (unlikely(master & MST_RD_ENA)) {
+ DBG (ep->dev, "start, IN active dma %03x!!\n",
+ master);
+// return -EL2HLT;
+ }
+ writel(end, &regs->in_dma_end);
+ writel(start, &regs->in_dma_start);
+
+ master &= ~MST_R_BITS;
+ if (unlikely(req->req.length == 0))
+ master = MST_RD_ENA | MST_RD_EOPB;
+ else if ((req->req.length % ep->ep.maxpacket) != 0
+ || req->req.zero)
+ master = MST_RD_ENA | MST_EOPB_ENA;
+ else
+ master = MST_RD_ENA | MST_EOPB_DIS;
+
+ ep->dev->int_enable |= INT_MSTRDEND;
+
+ /* Goku DMA-OUT merges short packets, which plays poorly with
+ * protocols where short packets mark the transfer boundaries.
+ * The chip supports a nonstandard policy with INT_MSTWRTMOUT,
+ * ending transfers after 3 SOFs; we don't turn it on.
+ */
+ } else {
+ if (unlikely(master & MST_WR_ENA)) {
+ DBG (ep->dev, "start, OUT active dma %03x!!\n",
+ master);
+// return -EL2HLT;
+ }
+ writel(end, &regs->out_dma_end);
+ writel(start, &regs->out_dma_start);
+
+ master &= ~MST_W_BITS;
+ master |= MST_WR_ENA | MST_TIMEOUT_DIS;
+
+ ep->dev->int_enable |= INT_MSTWREND|INT_MSTWRTMOUT;
+ }
+
+ writel(master, &regs->dma_master);
+ writel(ep->dev->int_enable, &regs->int_enable);
+ return 0;
+}
+
+static void dma_advance(struct goku_udc *dev, struct goku_ep *ep)
+{
+ struct goku_request *req;
+ struct goku_udc_regs __iomem *regs = ep->dev->regs;
+ u32 master;
+
+ master = readl(&regs->dma_master);
+
+ if (unlikely(list_empty(&ep->queue))) {
+stop:
+ if (ep->is_in)
+ dev->int_enable &= ~INT_MSTRDEND;
+ else
+ dev->int_enable &= ~(INT_MSTWREND|INT_MSTWRTMOUT);
+ writel(dev->int_enable, &regs->int_enable);
+ return;
+ }
+ req = list_entry(ep->queue.next, struct goku_request, queue);
+
+ /* normal hw dma completion (not abort) */
+ if (likely(ep->is_in)) {
+ if (unlikely(master & MST_RD_ENA))
+ return;
+ req->req.actual = readl(&regs->in_dma_current);
+ } else {
+ if (unlikely(master & MST_WR_ENA))
+ return;
+
+ /* hardware merges short packets, and also hides packet
+ * overruns. a partial packet MAY be in the fifo here.
+ */
+ req->req.actual = readl(&regs->out_dma_current);
+ }
+ req->req.actual -= req->req.dma;
+ req->req.actual++;
+
+#ifdef USB_TRACE
+ VDBG(dev, "done %s %s dma, %u/%u bytes, req %p\n",
+ ep->ep.name, ep->is_in ? "IN" : "OUT",
+ req->req.actual, req->req.length, req);
+#endif
+ done(ep, req, 0);
+ if (list_empty(&ep->queue))
+ goto stop;
+ req = list_entry(ep->queue.next, struct goku_request, queue);
+ (void) start_dma(ep, req);
+}
+
+static void abort_dma(struct goku_ep *ep, int status)
+{
+ struct goku_udc_regs __iomem *regs = ep->dev->regs;
+ struct goku_request *req;
+ u32 curr, master;
+
+ /* NAK future host requests, hoping the implicit delay lets the
+ * dma engine finish reading (or writing) its latest packet and
+ * empty the dma buffer (up to 16 bytes).
+ *
+ * This avoids needing to clean up a partial packet in the fifo;
+ * we can't do that for IN without side effects to HALT and TOGGLE.
+ */
+ command(regs, COMMAND_FIFO_DISABLE, ep->num);
+ req = list_entry(ep->queue.next, struct goku_request, queue);
+ master = readl(&regs->dma_master) & MST_RW_BITS;
+
+ /* FIXME using these resets isn't usably documented. this may
+ * not work unless it's followed by disabling the endpoint.
+ *
+ * FIXME the OUT reset path doesn't even behave consistently.
+ */
+ if (ep->is_in) {
+ if (unlikely((readl(&regs->dma_master) & MST_RD_ENA) == 0))
+ goto finished;
+ curr = readl(&regs->in_dma_current);
+
+ writel(curr, &regs->in_dma_end);
+ writel(curr, &regs->in_dma_start);
+
+ master &= ~MST_R_BITS;
+ master |= MST_RD_RESET;
+ writel(master, &regs->dma_master);
+
+ if (readl(&regs->dma_master) & MST_RD_ENA)
+ DBG(ep->dev, "IN dma active after reset!\n");
+
+ } else {
+ if (unlikely((readl(&regs->dma_master) & MST_WR_ENA) == 0))
+ goto finished;
+ curr = readl(&regs->out_dma_current);
+
+ writel(curr, &regs->out_dma_end);
+ writel(curr, &regs->out_dma_start);
+
+ master &= ~MST_W_BITS;
+ master |= MST_WR_RESET;
+ writel(master, &regs->dma_master);
+
+ if (readl(&regs->dma_master) & MST_WR_ENA)
+ DBG(ep->dev, "OUT dma active after reset!\n");
+ }
+ req->req.actual = (curr - req->req.dma) + 1;
+ req->req.status = status;
+
+ VDBG(ep->dev, "%s %s %s %d/%d\n", __FUNCTION__, ep->ep.name,
+ ep->is_in ? "IN" : "OUT",
+ req->req.actual, req->req.length);
+
+ command(regs, COMMAND_FIFO_ENABLE, ep->num);
+
+ return;
+
+finished:
+ /* dma already completed; no abort needed */
+ command(regs, COMMAND_FIFO_ENABLE, ep->num);
+ req->req.actual = req->req.length;
+ req->req.status = 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int
+goku_queue(struct usb_ep *_ep, struct usb_request *_req, int gfp_flags)
+{
+ struct goku_request *req;
+ struct goku_ep *ep;
+ struct goku_udc *dev;
+ unsigned long flags;
+ int status;
+
+ /* always require a cpu-view buffer so pio works */
+ req = container_of(_req, struct goku_request, req);
+ if (unlikely(!_req || !_req->complete
+ || !_req->buf || !list_empty(&req->queue)))
+ return -EINVAL;
+ ep = container_of(_ep, struct goku_ep, ep);
+ if (unlikely(!_ep || (!ep->desc && ep->num != 0)))
+ return -EINVAL;
+ dev = ep->dev;
+ if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN))
+ return -ESHUTDOWN;
+
+ /* can't touch registers when suspended */
+ if (dev->ep0state == EP0_SUSPEND)
+ return -EBUSY;
+
+ /* set up dma mapping in case the caller didn't */
+ if (ep->dma && _req->dma == DMA_ADDR_INVALID) {
+ _req->dma = pci_map_single(dev->pdev, _req->buf, _req->length,
+ ep->is_in ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
+ req->mapped = 1;
+ }
+
+#ifdef USB_TRACE
+ VDBG(dev, "%s queue req %p, len %u buf %p\n",
+ _ep->name, _req, _req->length, _req->buf);
+#endif
+
+ spin_lock_irqsave(&dev->lock, flags);
+
+ _req->status = -EINPROGRESS;
+ _req->actual = 0;
+
+ /* for ep0 IN without premature status, zlp is required and
+ * writing EOP starts the status stage (OUT).
+ */
+ if (unlikely(ep->num == 0 && ep->is_in))
+ _req->zero = 1;
+
+ /* kickstart this i/o queue? */
+ status = 0;
+ if (list_empty(&ep->queue) && likely(!ep->stopped)) {
+ /* dma: done after dma completion IRQ (or error)
+ * pio: done after last fifo operation
+ */
+ if (ep->dma)
+ status = start_dma(ep, req);
+ else
+ status = (ep->is_in ? write_fifo : read_fifo)(ep, req);
+
+ if (unlikely(status != 0)) {
+ if (status > 0)
+ status = 0;
+ req = NULL;
+ }
+
+ } /* else pio or dma irq handler advances the queue. */
+
+ if (likely(req != 0))
+ list_add_tail(&req->queue, &ep->queue);
+
+ if (likely(!list_empty(&ep->queue))
+ && likely(ep->num != 0)
+ && !ep->dma
+ && !(dev->int_enable & INT_EPxDATASET (ep->num)))
+ pio_irq_enable(dev, dev->regs, ep->num);
+
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ /* pci writes may still be posted */
+ return status;
+}
+
+/* dequeue ALL requests */
+static void nuke(struct goku_ep *ep, int status)
+{
+ struct goku_request *req;
+
+ ep->stopped = 1;
+ if (list_empty(&ep->queue))
+ return;
+ if (ep->dma)
+ abort_dma(ep, status);
+ while (!list_empty(&ep->queue)) {
+ req = list_entry(ep->queue.next, struct goku_request, queue);
+ done(ep, req, status);
+ }
+}
+
+/* dequeue JUST ONE request */
+static int goku_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct goku_request *req;
+ struct goku_ep *ep;
+ struct goku_udc *dev;
+ unsigned long flags;
+
+ ep = container_of(_ep, struct goku_ep, ep);
+ if (!_ep || !_req || (!ep->desc && ep->num != 0))
+ return -EINVAL;
+ dev = ep->dev;
+ if (!dev->driver)
+ return -ESHUTDOWN;
+
+ /* we can't touch (dma) registers when suspended */
+ if (dev->ep0state == EP0_SUSPEND)
+ return -EBUSY;
+
+ VDBG(dev, "%s %s %s %s %p\n", __FUNCTION__, _ep->name,
+ ep->is_in ? "IN" : "OUT",
+ ep->dma ? "dma" : "pio",
+ _req);
+
+ spin_lock_irqsave(&dev->lock, flags);
+
+ /* make sure it's actually queued on this endpoint */
+ list_for_each_entry (req, &ep->queue, queue) {
+ if (&req->req == _req)
+ break;
+ }
+ if (&req->req != _req) {
+ spin_unlock_irqrestore (&dev->lock, flags);
+ return -EINVAL;
+ }
+
+ if (ep->dma && ep->queue.next == &req->queue && !ep->stopped) {
+ abort_dma(ep, -ECONNRESET);
+ done(ep, req, -ECONNRESET);
+ dma_advance(dev, ep);
+ } else if (!list_empty(&req->queue))
+ done(ep, req, -ECONNRESET);
+ else
+ req = NULL;
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ return req ? 0 : -EOPNOTSUPP;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void goku_clear_halt(struct goku_ep *ep)
+{
+ // assert (ep->num !=0)
+ VDBG(ep->dev, "%s clear halt\n", ep->ep.name);
+ command(ep->dev->regs, COMMAND_SETDATA0, ep->num);
+ command(ep->dev->regs, COMMAND_STALL_CLEAR, ep->num);
+ if (ep->stopped) {
+ ep->stopped = 0;
+ if (ep->dma) {
+ struct goku_request *req;
+
+ if (list_empty(&ep->queue))
+ return;
+ req = list_entry(ep->queue.next, struct goku_request,
+ queue);
+ (void) start_dma(ep, req);
+ } else
+ pio_advance(ep);
+ }
+}
+
+static int goku_set_halt(struct usb_ep *_ep, int value)
+{
+ struct goku_ep *ep;
+ unsigned long flags;
+ int retval = 0;
+
+ if (!_ep)
+ return -ENODEV;
+ ep = container_of (_ep, struct goku_ep, ep);
+
+ if (ep->num == 0) {
+ if (value) {
+ ep->dev->ep0state = EP0_STALL;
+ ep->dev->ep[0].stopped = 1;
+ } else
+ return -EINVAL;
+
+ /* don't change EPxSTATUS_EP_INVALID to READY */
+ } else if (!ep->desc) {
+ DBG(ep->dev, "%s %s inactive?\n", __FUNCTION__, ep->ep.name);
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&ep->dev->lock, flags);
+ if (!list_empty(&ep->queue))
+ retval = -EAGAIN;
+ else if (ep->is_in && value
+ /* data in (either) packet buffer? */
+ && (readl(&ep->dev->regs->DataSet)
+ & DATASET_AB(ep->num)))
+ retval = -EAGAIN;
+ else if (!value)
+ goku_clear_halt(ep);
+ else {
+ ep->stopped = 1;
+ VDBG(ep->dev, "%s set halt\n", ep->ep.name);
+ command(ep->dev->regs, COMMAND_STALL, ep->num);
+ readl(ep->reg_status);
+ }
+ spin_unlock_irqrestore(&ep->dev->lock, flags);
+ return retval;
+}
+
+static int goku_fifo_status(struct usb_ep *_ep)
+{
+ struct goku_ep *ep;
+ struct goku_udc_regs __iomem *regs;
+ u32 size;
+
+ if (!_ep)
+ return -ENODEV;
+ ep = container_of(_ep, struct goku_ep, ep);
+
+ /* size is only reported sanely for OUT */
+ if (ep->is_in)
+ return -EOPNOTSUPP;
+
+ /* ignores 16-byte dma buffer; SizeH == 0 */
+ regs = ep->dev->regs;
+ size = readl(&regs->EPxSizeLA[ep->num]) & DATASIZE;
+ size += readl(&regs->EPxSizeLB[ep->num]) & DATASIZE;
+ VDBG(ep->dev, "%s %s %u\n", __FUNCTION__, ep->ep.name, size);
+ return size;
+}
+
+static void goku_fifo_flush(struct usb_ep *_ep)
+{
+ struct goku_ep *ep;
+ struct goku_udc_regs __iomem *regs;
+ u32 size;
+
+ if (!_ep)
+ return;
+ ep = container_of(_ep, struct goku_ep, ep);
+ VDBG(ep->dev, "%s %s\n", __FUNCTION__, ep->ep.name);
+
+ /* don't change EPxSTATUS_EP_INVALID to READY */
+ if (!ep->desc && ep->num != 0) {
+ DBG(ep->dev, "%s %s inactive?\n", __FUNCTION__, ep->ep.name);
+ return;
+ }
+
+ regs = ep->dev->regs;
+ size = readl(&regs->EPxSizeLA[ep->num]);
+ size &= DATASIZE;
+
+ /* Non-desirable behavior: FIFO_CLEAR also clears the
+ * endpoint halt feature. For OUT, we _could_ just read
+ * the bytes out (PIO, if !ep->dma); for in, no choice.
+ */
+ if (size)
+ command(regs, COMMAND_FIFO_CLEAR, ep->num);
+}
+
+static struct usb_ep_ops goku_ep_ops = {
+ .enable = goku_ep_enable,
+ .disable = goku_ep_disable,
+
+ .alloc_request = goku_alloc_request,
+ .free_request = goku_free_request,
+
+ .alloc_buffer = goku_alloc_buffer,
+ .free_buffer = goku_free_buffer,
+
+ .queue = goku_queue,
+ .dequeue = goku_dequeue,
+
+ .set_halt = goku_set_halt,
+ .fifo_status = goku_fifo_status,
+ .fifo_flush = goku_fifo_flush,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int goku_get_frame(struct usb_gadget *_gadget)
+{
+ return -EOPNOTSUPP;
+}
+
+static const struct usb_gadget_ops goku_ops = {
+ .get_frame = goku_get_frame,
+ // no remote wakeup
+ // not selfpowered
+};
+
+/*-------------------------------------------------------------------------*/
+
+static inline char *dmastr(void)
+{
+ if (use_dma == 0)
+ return "(dma disabled)";
+ else if (use_dma == 2)
+ return "(dma IN and OUT)";
+ else
+ return "(dma IN)";
+}
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+static const char proc_node_name [] = "driver/udc";
+
+#define FOURBITS "%s%s%s%s"
+#define EIGHTBITS FOURBITS FOURBITS
+
+static void
+dump_intmask(const char *label, u32 mask, char **next, unsigned *size)
+{
+ int t;
+
+ /* int_status is the same format ... */
+ t = scnprintf(*next, *size,
+ "%s %05X =" FOURBITS EIGHTBITS EIGHTBITS "\n",
+ label, mask,
+ (mask & INT_PWRDETECT) ? " power" : "",
+ (mask & INT_SYSERROR) ? " sys" : "",
+ (mask & INT_MSTRDEND) ? " in-dma" : "",
+ (mask & INT_MSTWRTMOUT) ? " wrtmo" : "",
+
+ (mask & INT_MSTWREND) ? " out-dma" : "",
+ (mask & INT_MSTWRSET) ? " wrset" : "",
+ (mask & INT_ERR) ? " err" : "",
+ (mask & INT_SOF) ? " sof" : "",
+
+ (mask & INT_EP3NAK) ? " ep3nak" : "",
+ (mask & INT_EP2NAK) ? " ep2nak" : "",
+ (mask & INT_EP1NAK) ? " ep1nak" : "",
+ (mask & INT_EP3DATASET) ? " ep3" : "",
+
+ (mask & INT_EP2DATASET) ? " ep2" : "",
+ (mask & INT_EP1DATASET) ? " ep1" : "",
+ (mask & INT_STATUSNAK) ? " ep0snak" : "",
+ (mask & INT_STATUS) ? " ep0status" : "",
+
+ (mask & INT_SETUP) ? " setup" : "",
+ (mask & INT_ENDPOINT0) ? " ep0" : "",
+ (mask & INT_USBRESET) ? " reset" : "",
+ (mask & INT_SUSPEND) ? " suspend" : "");
+ *size -= t;
+ *next += t;
+}
+
+
+static int
+udc_proc_read(char *buffer, char **start, off_t off, int count,
+ int *eof, void *_dev)
+{
+ char *buf = buffer;
+ struct goku_udc *dev = _dev;
+ struct goku_udc_regs __iomem *regs = dev->regs;
+ char *next = buf;
+ unsigned size = count;
+ unsigned long flags;
+ int i, t, is_usb_connected;
+ u32 tmp;
+
+ if (off != 0)
+ return 0;
+
+ local_irq_save(flags);
+
+ /* basic device status */
+ tmp = readl(&regs->power_detect);
+ is_usb_connected = tmp & PW_DETECT;
+ t = scnprintf(next, size,
+ "%s - %s\n"
+ "%s version: %s %s\n"
+ "Gadget driver: %s\n"
+ "Host %s, %s\n"
+ "\n",
+ pci_name(dev->pdev), driver_desc,
+ driver_name, DRIVER_VERSION, dmastr(),
+ dev->driver ? dev->driver->driver.name : "(none)",
+ is_usb_connected
+ ? ((tmp & PW_PULLUP) ? "full speed" : "powered")
+ : "disconnected",
+ ({char *tmp;
+ switch(dev->ep0state){
+ case EP0_DISCONNECT: tmp = "ep0_disconnect"; break;
+ case EP0_IDLE: tmp = "ep0_idle"; break;
+ case EP0_IN: tmp = "ep0_in"; break;
+ case EP0_OUT: tmp = "ep0_out"; break;
+ case EP0_STATUS: tmp = "ep0_status"; break;
+ case EP0_STALL: tmp = "ep0_stall"; break;
+ case EP0_SUSPEND: tmp = "ep0_suspend"; break;
+ default: tmp = "ep0_?"; break;
+ } tmp; })
+ );
+ size -= t;
+ next += t;
+
+ dump_intmask("int_status", readl(&regs->int_status), &next, &size);
+ dump_intmask("int_enable", readl(&regs->int_enable), &next, &size);
+
+ if (!is_usb_connected || !dev->driver || (tmp & PW_PULLUP) == 0)
+ goto done;
+
+ /* registers for (active) device and ep0 */
+ t = scnprintf(next, size, "\nirqs %lu\ndataset %02x "
+ "single.bcs %02x.%02x state %x addr %u\n",
+ dev->irqs, readl(&regs->DataSet),
+ readl(&regs->EPxSingle), readl(&regs->EPxBCS),
+ readl(&regs->UsbState),
+ readl(&regs->address));
+ size -= t;
+ next += t;
+
+ tmp = readl(&regs->dma_master);
+ t = scnprintf(next, size,
+ "dma %03X =" EIGHTBITS "%s %s\n", tmp,
+ (tmp & MST_EOPB_DIS) ? " eopb-" : "",
+ (tmp & MST_EOPB_ENA) ? " eopb+" : "",
+ (tmp & MST_TIMEOUT_DIS) ? " tmo-" : "",
+ (tmp & MST_TIMEOUT_ENA) ? " tmo+" : "",
+
+ (tmp & MST_RD_EOPB) ? " eopb" : "",
+ (tmp & MST_RD_RESET) ? " in_reset" : "",
+ (tmp & MST_WR_RESET) ? " out_reset" : "",
+ (tmp & MST_RD_ENA) ? " IN" : "",
+
+ (tmp & MST_WR_ENA) ? " OUT" : "",
+ (tmp & MST_CONNECTION)
+ ? "ep1in/ep2out"
+ : "ep1out/ep2in");
+ size -= t;
+ next += t;
+
+ /* dump endpoint queues */
+ for (i = 0; i < 4; i++) {
+ struct goku_ep *ep = &dev->ep [i];
+ struct goku_request *req;
+ int t;
+
+ if (i && !ep->desc)
+ continue;
+
+ tmp = readl(ep->reg_status);
+ t = scnprintf(next, size,
+ "%s %s max %u %s, irqs %lu, "
+ "status %02x (%s) " FOURBITS "\n",
+ ep->ep.name,
+ ep->is_in ? "in" : "out",
+ ep->ep.maxpacket,
+ ep->dma ? "dma" : "pio",
+ ep->irqs,
+ tmp, ({ char *s;
+ switch (tmp & EPxSTATUS_EP_MASK) {
+ case EPxSTATUS_EP_READY:
+ s = "ready"; break;
+ case EPxSTATUS_EP_DATAIN:
+ s = "packet"; break;
+ case EPxSTATUS_EP_FULL:
+ s = "full"; break;
+ case EPxSTATUS_EP_TX_ERR: // host will retry
+ s = "tx_err"; break;
+ case EPxSTATUS_EP_RX_ERR:
+ s = "rx_err"; break;
+ case EPxSTATUS_EP_BUSY: /* ep0 only */
+ s = "busy"; break;
+ case EPxSTATUS_EP_STALL:
+ s = "stall"; break;
+ case EPxSTATUS_EP_INVALID: // these "can't happen"
+ s = "invalid"; break;
+ default:
+ s = "?"; break;
+ }; s; }),
+ (tmp & EPxSTATUS_TOGGLE) ? "data1" : "data0",
+ (tmp & EPxSTATUS_SUSPEND) ? " suspend" : "",
+ (tmp & EPxSTATUS_FIFO_DISABLE) ? " disable" : "",
+ (tmp & EPxSTATUS_STAGE_ERROR) ? " ep0stat" : ""
+ );
+ if (t <= 0 || t > size)
+ goto done;
+ size -= t;
+ next += t;
+
+ if (list_empty(&ep->queue)) {
+ t = scnprintf(next, size, "\t(nothing queued)\n");
+ if (t <= 0 || t > size)
+ goto done;
+ size -= t;
+ next += t;
+ continue;
+ }
+ list_for_each_entry(req, &ep->queue, queue) {
+ if (ep->dma && req->queue.prev == &ep->queue) {
+ if (i == UDC_MSTRD_ENDPOINT)
+ tmp = readl(&regs->in_dma_current);
+ else
+ tmp = readl(&regs->out_dma_current);
+ tmp -= req->req.dma;
+ tmp++;
+ } else
+ tmp = req->req.actual;
+
+ t = scnprintf(next, size,
+ "\treq %p len %u/%u buf %p\n",
+ &req->req, tmp, req->req.length,
+ req->req.buf);
+ if (t <= 0 || t > size)
+ goto done;
+ size -= t;
+ next += t;
+ }
+ }
+
+done:
+ local_irq_restore(flags);
+ *eof = 1;
+ return count - size;
+}
+
+#endif /* CONFIG_USB_GADGET_DEBUG_FILES */
+
+/*-------------------------------------------------------------------------*/
+
+static void udc_reinit (struct goku_udc *dev)
+{
+ static char *names [] = { "ep0", "ep1-bulk", "ep2-bulk", "ep3-bulk" };
+
+ unsigned i;
+
+ INIT_LIST_HEAD (&dev->gadget.ep_list);
+ dev->gadget.ep0 = &dev->ep [0].ep;
+ dev->gadget.speed = USB_SPEED_UNKNOWN;
+ dev->ep0state = EP0_DISCONNECT;
+ dev->irqs = 0;
+
+ for (i = 0; i < 4; i++) {
+ struct goku_ep *ep = &dev->ep[i];
+
+ ep->num = i;
+ ep->ep.name = names[i];
+ ep->reg_fifo = &dev->regs->ep_fifo [i];
+ ep->reg_status = &dev->regs->ep_status [i];
+ ep->reg_mode = &dev->regs->ep_mode[i];
+
+ ep->ep.ops = &goku_ep_ops;
+ list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list);
+ ep->dev = dev;
+ INIT_LIST_HEAD (&ep->queue);
+
+ ep_reset(NULL, ep);
+ }
+
+ dev->ep[0].reg_mode = NULL;
+ dev->ep[0].ep.maxpacket = MAX_EP0_SIZE;
+ list_del_init (&dev->ep[0].ep.ep_list);
+}
+
+static void udc_reset(struct goku_udc *dev)
+{
+ struct goku_udc_regs __iomem *regs = dev->regs;
+
+ writel(0, &regs->power_detect);
+ writel(0, &regs->int_enable);
+ readl(&regs->int_enable);
+ dev->int_enable = 0;
+
+ /* deassert reset, leave USB D+ at hi-Z (no pullup)
+ * don't let INT_PWRDETECT sequence begin
+ */
+ udelay(250);
+ writel(PW_RESETB, &regs->power_detect);
+ readl(&regs->int_enable);
+}
+
+static void ep0_start(struct goku_udc *dev)
+{
+ struct goku_udc_regs __iomem *regs = dev->regs;
+ unsigned i;
+
+ VDBG(dev, "%s\n", __FUNCTION__);
+
+ udc_reset(dev);
+ udc_reinit (dev);
+ //writel(MST_EOPB_ENA | MST_TIMEOUT_ENA, &regs->dma_master);
+
+ /* hw handles set_address, set_feature, get_status; maybe more */
+ writel( G_REQMODE_SET_INTF | G_REQMODE_GET_INTF
+ | G_REQMODE_SET_CONF | G_REQMODE_GET_CONF
+ | G_REQMODE_GET_DESC
+ | G_REQMODE_CLEAR_FEAT
+ , &regs->reqmode);
+
+ for (i = 0; i < 4; i++)
+ dev->ep[i].irqs = 0;
+
+ /* can't modify descriptors after writing UsbReady */
+ for (i = 0; i < DESC_LEN; i++)
+ writel(0, &regs->descriptors[i]);
+ writel(0, &regs->UsbReady);
+
+ /* expect ep0 requests when the host drops reset */
+ writel(PW_RESETB | PW_PULLUP, &regs->power_detect);
+ dev->int_enable = INT_DEVWIDE | INT_EP0;
+ writel(dev->int_enable, &dev->regs->int_enable);
+ readl(&regs->int_enable);
+ dev->gadget.speed = USB_SPEED_FULL;
+ dev->ep0state = EP0_IDLE;
+}
+
+static void udc_enable(struct goku_udc *dev)
+{
+ /* start enumeration now, or after power detect irq */
+ if (readl(&dev->regs->power_detect) & PW_DETECT)
+ ep0_start(dev);
+ else {
+ DBG(dev, "%s\n", __FUNCTION__);
+ dev->int_enable = INT_PWRDETECT;
+ writel(dev->int_enable, &dev->regs->int_enable);
+ }
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* keeping it simple:
+ * - one bus driver, initted first;
+ * - one function driver, initted second
+ */
+
+static struct goku_udc *the_controller;
+
+/* when a driver is successfully registered, it will receive
+ * control requests including set_configuration(), which enables
+ * non-control requests. then usb traffic follows until a
+ * disconnect is reported. then a host may connect again, or
+ * the driver might get unbound.
+ */
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+ struct goku_udc *dev = the_controller;
+ int retval;
+
+ if (!driver
+ || driver->speed != USB_SPEED_FULL
+ || !driver->bind
+ || !driver->unbind
+ || !driver->disconnect
+ || !driver->setup)
+ return -EINVAL;
+ if (!dev)
+ return -ENODEV;
+ if (dev->driver)
+ return -EBUSY;
+
+ /* hook up the driver */
+ driver->driver.bus = NULL;
+ dev->driver = driver;
+ dev->gadget.dev.driver = &driver->driver;
+ retval = driver->bind(&dev->gadget);
+ if (retval) {
+ DBG(dev, "bind to driver %s --> error %d\n",
+ driver->driver.name, retval);
+ dev->driver = NULL;
+ dev->gadget.dev.driver = NULL;
+ return retval;
+ }
+
+ /* then enable host detection and ep0; and we're ready
+ * for set_configuration as well as eventual disconnect.
+ */
+ udc_enable(dev);
+
+ DBG(dev, "registered gadget driver '%s'\n", driver->driver.name);
+ return 0;
+}
+EXPORT_SYMBOL(usb_gadget_register_driver);
+
+static void
+stop_activity(struct goku_udc *dev, struct usb_gadget_driver *driver)
+{
+ unsigned i;
+
+ DBG (dev, "%s\n", __FUNCTION__);
+
+ if (dev->gadget.speed == USB_SPEED_UNKNOWN)
+ driver = NULL;
+
+ /* disconnect gadget driver after quiesceing hw and the driver */
+ udc_reset (dev);
+ for (i = 0; i < 4; i++)
+ nuke(&dev->ep [i], -ESHUTDOWN);
+ if (driver) {
+ spin_unlock(&dev->lock);
+ driver->disconnect(&dev->gadget);
+ spin_lock(&dev->lock);
+ }
+
+ if (dev->driver)
+ udc_enable(dev);
+}
+
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+ struct goku_udc *dev = the_controller;
+ unsigned long flags;
+
+ if (!dev)
+ return -ENODEV;
+ if (!driver || driver != dev->driver)
+ return -EINVAL;
+
+ spin_lock_irqsave(&dev->lock, flags);
+ dev->driver = NULL;
+ stop_activity(dev, driver);
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ driver->unbind(&dev->gadget);
+
+ DBG(dev, "unregistered driver '%s'\n", driver->driver.name);
+ return 0;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+
+/*-------------------------------------------------------------------------*/
+
+static void ep0_setup(struct goku_udc *dev)
+{
+ struct goku_udc_regs __iomem *regs = dev->regs;
+ struct usb_ctrlrequest ctrl;
+ int tmp;
+
+ /* read SETUP packet and enter DATA stage */
+ ctrl.bRequestType = readl(&regs->bRequestType);
+ ctrl.bRequest = readl(&regs->bRequest);
+ ctrl.wValue = (readl(&regs->wValueH) << 8) | readl(&regs->wValueL);
+ ctrl.wIndex = (readl(&regs->wIndexH) << 8) | readl(&regs->wIndexL);
+ ctrl.wLength = (readl(&regs->wLengthH) << 8) | readl(&regs->wLengthL);
+ writel(0, &regs->SetupRecv);
+
+ nuke(&dev->ep[0], 0);
+ dev->ep[0].stopped = 0;
+ if (likely(ctrl.bRequestType & USB_DIR_IN)) {
+ dev->ep[0].is_in = 1;
+ dev->ep0state = EP0_IN;
+ /* detect early status stages */
+ writel(ICONTROL_STATUSNAK, &dev->regs->IntControl);
+ } else {
+ dev->ep[0].is_in = 0;
+ dev->ep0state = EP0_OUT;
+
+ /* NOTE: CLEAR_FEATURE is done in software so that we can
+ * synchronize transfer restarts after bulk IN stalls. data
+ * won't even enter the fifo until the halt is cleared.
+ */
+ switch (ctrl.bRequest) {
+ case USB_REQ_CLEAR_FEATURE:
+ switch (ctrl.bRequestType) {
+ case USB_RECIP_ENDPOINT:
+ tmp = ctrl.wIndex & 0x0f;
+ /* active endpoint */
+ if (tmp > 3 || (!dev->ep[tmp].desc && tmp != 0))
+ goto stall;
+ if (ctrl.wIndex & USB_DIR_IN) {
+ if (!dev->ep[tmp].is_in)
+ goto stall;
+ } else {
+ if (dev->ep[tmp].is_in)
+ goto stall;
+ }
+ if (ctrl.wValue != USB_ENDPOINT_HALT)
+ goto stall;
+ if (tmp)
+ goku_clear_halt(&dev->ep[tmp]);
+succeed:
+ /* start ep0out status stage */
+ writel(~(1<<0), &regs->EOP);
+ dev->ep[0].stopped = 1;
+ dev->ep0state = EP0_STATUS;
+ return;
+ case USB_RECIP_DEVICE:
+ /* device remote wakeup: always clear */
+ if (ctrl.wValue != 1)
+ goto stall;
+ VDBG(dev, "clear dev remote wakeup\n");
+ goto succeed;
+ case USB_RECIP_INTERFACE:
+ goto stall;
+ default: /* pass to gadget driver */
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+
+#ifdef USB_TRACE
+ VDBG(dev, "SETUP %02x.%02x v%04x i%04x l%04x\n",
+ ctrl.bRequestType, ctrl.bRequest,
+ ctrl.wValue, ctrl.wIndex, ctrl.wLength);
+#endif
+
+ /* hw wants to know when we're configured (or not) */
+ dev->req_config = (ctrl.bRequest == USB_REQ_SET_CONFIGURATION
+ && ctrl.bRequestType == USB_RECIP_DEVICE);
+ if (unlikely(dev->req_config))
+ dev->configured = (ctrl.wValue != 0);
+
+ /* delegate everything to the gadget driver.
+ * it may respond after this irq handler returns.
+ */
+ spin_unlock (&dev->lock);
+ tmp = dev->driver->setup(&dev->gadget, &ctrl);
+ spin_lock (&dev->lock);
+ if (unlikely(tmp < 0)) {
+stall:
+#ifdef USB_TRACE
+ VDBG(dev, "req %02x.%02x protocol STALL; err %d\n",
+ ctrl.bRequestType, ctrl.bRequest, tmp);
+#endif
+ command(regs, COMMAND_STALL, 0);
+ dev->ep[0].stopped = 1;
+ dev->ep0state = EP0_STALL;
+ }
+
+ /* expect at least one data or status stage irq */
+}
+
+#define ACK(irqbit) { \
+ stat &= ~irqbit; \
+ writel(~irqbit, &regs->int_status); \
+ handled = 1; \
+ }
+
+static irqreturn_t goku_irq(int irq, void *_dev, struct pt_regs *r)
+{
+ struct goku_udc *dev = _dev;
+ struct goku_udc_regs __iomem *regs = dev->regs;
+ struct goku_ep *ep;
+ u32 stat, handled = 0;
+ unsigned i, rescans = 5;
+
+ spin_lock(&dev->lock);
+
+rescan:
+ stat = readl(&regs->int_status) & dev->int_enable;
+ if (!stat)
+ goto done;
+ dev->irqs++;
+
+ /* device-wide irqs */
+ if (unlikely(stat & INT_DEVWIDE)) {
+ if (stat & INT_SYSERROR) {
+ ERROR(dev, "system error\n");
+ stop_activity(dev, dev->driver);
+ stat = 0;
+ handled = 1;
+ // FIXME have a neater way to prevent re-enumeration
+ dev->driver = NULL;
+ goto done;
+ }
+ if (stat & INT_PWRDETECT) {
+ writel(~stat, &regs->int_status);
+ if (readl(&dev->regs->power_detect) & PW_DETECT) {
+ VDBG(dev, "connect\n");
+ ep0_start(dev);
+ } else {
+ DBG(dev, "disconnect\n");
+ if (dev->gadget.speed == USB_SPEED_FULL)
+ stop_activity(dev, dev->driver);
+ dev->ep0state = EP0_DISCONNECT;
+ dev->int_enable = INT_DEVWIDE;
+ writel(dev->int_enable, &dev->regs->int_enable);
+ }
+ stat = 0;
+ handled = 1;
+ goto done;
+ }
+ if (stat & INT_SUSPEND) {
+ ACK(INT_SUSPEND);
+ if (readl(&regs->ep_status[0]) & EPxSTATUS_SUSPEND) {
+ switch (dev->ep0state) {
+ case EP0_DISCONNECT:
+ case EP0_SUSPEND:
+ goto pm_next;
+ default:
+ break;
+ }
+ DBG(dev, "USB suspend\n");
+ dev->ep0state = EP0_SUSPEND;
+ if (dev->gadget.speed != USB_SPEED_UNKNOWN
+ && dev->driver
+ && dev->driver->suspend) {
+ spin_unlock(&dev->lock);
+ dev->driver->suspend(&dev->gadget);
+ spin_lock(&dev->lock);
+ }
+ } else {
+ if (dev->ep0state != EP0_SUSPEND) {
+ DBG(dev, "bogus USB resume %d\n",
+ dev->ep0state);
+ goto pm_next;
+ }
+ DBG(dev, "USB resume\n");
+ dev->ep0state = EP0_IDLE;
+ if (dev->gadget.speed != USB_SPEED_UNKNOWN
+ && dev->driver
+ && dev->driver->resume) {
+ spin_unlock(&dev->lock);
+ dev->driver->resume(&dev->gadget);
+ spin_lock(&dev->lock);
+ }
+ }
+ }
+pm_next:
+ if (stat & INT_USBRESET) { /* hub reset done */
+ ACK(INT_USBRESET);
+ INFO(dev, "USB reset done, gadget %s\n",
+ dev->driver->driver.name);
+ }
+ // and INT_ERR on some endpoint's crc/bitstuff/... problem
+ }
+
+ /* progress ep0 setup, data, or status stages.
+ * no transition {EP0_STATUS, EP0_STALL} --> EP0_IDLE; saves irqs
+ */
+ if (stat & INT_SETUP) {
+ ACK(INT_SETUP);
+ dev->ep[0].irqs++;
+ ep0_setup(dev);
+ }
+ if (stat & INT_STATUSNAK) {
+ ACK(INT_STATUSNAK|INT_ENDPOINT0);
+ if (dev->ep0state == EP0_IN) {
+ ep = &dev->ep[0];
+ ep->irqs++;
+ nuke(ep, 0);
+ writel(~(1<<0), &regs->EOP);
+ dev->ep0state = EP0_STATUS;
+ }
+ }
+ if (stat & INT_ENDPOINT0) {
+ ACK(INT_ENDPOINT0);
+ ep = &dev->ep[0];
+ ep->irqs++;
+ pio_advance(ep);
+ }
+
+ /* dma completion */
+ if (stat & INT_MSTRDEND) { /* IN */
+ ACK(INT_MSTRDEND);
+ ep = &dev->ep[UDC_MSTRD_ENDPOINT];
+ ep->irqs++;
+ dma_advance(dev, ep);
+ }
+ if (stat & INT_MSTWREND) { /* OUT */
+ ACK(INT_MSTWREND);
+ ep = &dev->ep[UDC_MSTWR_ENDPOINT];
+ ep->irqs++;
+ dma_advance(dev, ep);
+ }
+ if (stat & INT_MSTWRTMOUT) { /* OUT */
+ ACK(INT_MSTWRTMOUT);
+ ep = &dev->ep[UDC_MSTWR_ENDPOINT];
+ ep->irqs++;
+ ERROR(dev, "%s write timeout ?\n", ep->ep.name);
+ // reset dma? then dma_advance()
+ }
+
+ /* pio */
+ for (i = 1; i < 4; i++) {
+ u32 tmp = INT_EPxDATASET(i);
+
+ if (!(stat & tmp))
+ continue;
+ ep = &dev->ep[i];
+ pio_advance(ep);
+ if (list_empty (&ep->queue))
+ pio_irq_disable(dev, regs, i);
+ stat &= ~tmp;
+ handled = 1;
+ ep->irqs++;
+ }
+
+ if (rescans--)
+ goto rescan;
+
+done:
+ (void)readl(&regs->int_enable);
+ spin_unlock(&dev->lock);
+ if (stat)
+ DBG(dev, "unhandled irq status: %05x (%05x, %05x)\n", stat,
+ readl(&regs->int_status), dev->int_enable);
+ return IRQ_RETVAL(handled);
+}
+
+#undef ACK
+
+/*-------------------------------------------------------------------------*/
+
+static void gadget_release(struct device *_dev)
+{
+ struct goku_udc *dev = dev_get_drvdata(_dev);
+
+ kfree(dev);
+}
+
+/* tear down the binding between this driver and the pci device */
+
+static void goku_remove(struct pci_dev *pdev)
+{
+ struct goku_udc *dev = pci_get_drvdata(pdev);
+
+ DBG(dev, "%s\n", __FUNCTION__);
+ /* start with the driver above us */
+ if (dev->driver) {
+ /* should have been done already by driver model core */
+ WARN(dev, "pci remove, driver '%s' is still registered\n",
+ dev->driver->driver.name);
+ usb_gadget_unregister_driver(dev->driver);
+ }
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+ remove_proc_entry(proc_node_name, NULL);
+#endif
+ if (dev->regs)
+ udc_reset(dev);
+ if (dev->got_irq)
+ free_irq(pdev->irq, dev);
+ if (dev->regs)
+ iounmap(dev->regs);
+ if (dev->got_region)
+ release_mem_region(pci_resource_start (pdev, 0),
+ pci_resource_len (pdev, 0));
+ if (dev->enabled)
+ pci_disable_device(pdev);
+ device_unregister(&dev->gadget.dev);
+
+ pci_set_drvdata(pdev, NULL);
+ dev->regs = NULL;
+ the_controller = NULL;
+
+ INFO(dev, "unbind\n");
+}
+
+/* wrap this driver around the specified pci device, but
+ * don't respond over USB until a gadget driver binds to us.
+ */
+
+static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct goku_udc *dev = NULL;
+ unsigned long resource, len;
+ void __iomem *base = NULL;
+ int retval;
+ char buf [8], *bufp;
+
+ /* if you want to support more than one controller in a system,
+ * usb_gadget_driver_{register,unregister}() must change.
+ */
+ if (the_controller) {
+ WARN(dev, "ignoring %s\n", pci_name(pdev));
+ return -EBUSY;
+ }
+ if (!pdev->irq) {
+ printk(KERN_ERR "Check PCI %s IRQ setup!\n", pci_name(pdev));
+ retval = -ENODEV;
+ goto done;
+ }
+
+ /* alloc, and start init */
+ dev = kmalloc (sizeof *dev, SLAB_KERNEL);
+ if (dev == NULL){
+ pr_debug("enomem %s\n", pci_name(pdev));
+ retval = -ENOMEM;
+ goto done;
+ }
+
+ memset(dev, 0, sizeof *dev);
+ spin_lock_init(&dev->lock);
+ dev->pdev = pdev;
+ dev->gadget.ops = &goku_ops;
+
+ /* the "gadget" abstracts/virtualizes the controller */
+ strcpy(dev->gadget.dev.bus_id, "gadget");
+ dev->gadget.dev.parent = &pdev->dev;
+ dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
+ dev->gadget.dev.release = gadget_release;
+ dev->gadget.name = driver_name;
+
+ /* now all the pci goodies ... */
+ retval = pci_enable_device(pdev);
+ if (retval < 0) {
+ DBG(dev, "can't enable, %d\n", retval);
+ goto done;
+ }
+ dev->enabled = 1;
+
+ resource = pci_resource_start(pdev, 0);
+ len = pci_resource_len(pdev, 0);
+ if (!request_mem_region(resource, len, driver_name)) {
+ DBG(dev, "controller already in use\n");
+ retval = -EBUSY;
+ goto done;
+ }
+ dev->got_region = 1;
+
+ base = ioremap_nocache(resource, len);
+ if (base == NULL) {
+ DBG(dev, "can't map memory\n");
+ retval = -EFAULT;
+ goto done;
+ }
+ dev->regs = (struct goku_udc_regs __iomem *) base;
+
+ pci_set_drvdata(pdev, dev);
+ INFO(dev, "%s\n", driver_desc);
+ INFO(dev, "version: " DRIVER_VERSION " %s\n", dmastr());
+#ifndef __sparc__
+ scnprintf(buf, sizeof buf, "%d", pdev->irq);
+ bufp = buf;
+#else
+ bufp = __irq_itoa(pdev->irq);
+#endif
+ INFO(dev, "irq %s, pci mem %p\n", bufp, base);
+
+ /* init to known state, then setup irqs */
+ udc_reset(dev);
+ udc_reinit (dev);
+ if (request_irq(pdev->irq, goku_irq, SA_SHIRQ/*|SA_SAMPLE_RANDOM*/,
+ driver_name, dev) != 0) {
+ DBG(dev, "request interrupt %s failed\n", bufp);
+ retval = -EBUSY;
+ goto done;
+ }
+ dev->got_irq = 1;
+ if (use_dma)
+ pci_set_master(pdev);
+
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+ create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev);
+#endif
+
+ /* done */
+ the_controller = dev;
+ device_register(&dev->gadget.dev);
+
+ return 0;
+
+done:
+ if (dev)
+ goku_remove (pdev);
+ return retval;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static struct pci_device_id pci_ids [] = { {
+ .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
+ .class_mask = ~0,
+ .vendor = 0x102f, /* Toshiba */
+ .device = 0x0107, /* this UDC */
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+
+}, { /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE (pci, pci_ids);
+
+static struct pci_driver goku_pci_driver = {
+ .name = (char *) driver_name,
+ .id_table = pci_ids,
+
+ .probe = goku_probe,
+ .remove = goku_remove,
+
+ /* FIXME add power management support */
+};
+
+static int __init init (void)
+{
+ return pci_register_driver (&goku_pci_driver);
+}
+module_init (init);
+
+static void __exit cleanup (void)
+{
+ pci_unregister_driver (&goku_pci_driver);
+}
+module_exit (cleanup);
diff --git a/drivers/usb/gadget/goku_udc.h b/drivers/usb/gadget/goku_udc.h
new file mode 100644
index 00000000000..ea8c8e58cab
--- /dev/null
+++ b/drivers/usb/gadget/goku_udc.h
@@ -0,0 +1,290 @@
+/*
+ * Toshiba TC86C001 ("Goku-S") USB Device Controller driver
+ *
+ * Copyright (C) 2000-2002 Lineo
+ * by Stuart Lynne, Tom Rushworth, and Bruce Balden
+ * Copyright (C) 2002 Toshiba Corporation
+ * Copyright (C) 2003 MontaVista Software (source@mvista.com)
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/*
+ * PCI BAR 0 points to these registers.
+ */
+struct goku_udc_regs {
+ /* irq management */
+ u32 int_status; /* 0x000 */
+ u32 int_enable;
+#define INT_SUSPEND 0x00001 /* or resume */
+#define INT_USBRESET 0x00002
+#define INT_ENDPOINT0 0x00004
+#define INT_SETUP 0x00008
+#define INT_STATUS 0x00010
+#define INT_STATUSNAK 0x00020
+#define INT_EPxDATASET(n) (0x00020 << (n)) /* 0 < n < 4 */
+# define INT_EP1DATASET 0x00040
+# define INT_EP2DATASET 0x00080
+# define INT_EP3DATASET 0x00100
+#define INT_EPnNAK(n) (0x00100 < (n)) /* 0 < n < 4 */
+# define INT_EP1NAK 0x00200
+# define INT_EP2NAK 0x00400
+# define INT_EP3NAK 0x00800
+#define INT_SOF 0x01000
+#define INT_ERR 0x02000
+#define INT_MSTWRSET 0x04000
+#define INT_MSTWREND 0x08000
+#define INT_MSTWRTMOUT 0x10000
+#define INT_MSTRDEND 0x20000
+#define INT_SYSERROR 0x40000
+#define INT_PWRDETECT 0x80000
+
+#define INT_DEVWIDE (INT_PWRDETECT|INT_SYSERROR/*|INT_ERR*/|INT_USBRESET|INT_SUSPEND)
+#define INT_EP0 (INT_SETUP|INT_ENDPOINT0/*|INT_STATUS*/|INT_STATUSNAK)
+
+ u32 dma_master;
+#define MST_EOPB_DIS 0x0800
+#define MST_EOPB_ENA 0x0400
+#define MST_TIMEOUT_DIS 0x0200
+#define MST_TIMEOUT_ENA 0x0100
+#define MST_RD_EOPB 0x0080 /* write-only */
+#define MST_RD_RESET 0x0040
+#define MST_WR_RESET 0x0020
+#define MST_RD_ENA 0x0004 /* 1:start, 0:ignore */
+#define MST_WR_ENA 0x0002 /* 1:start, 0:ignore */
+#define MST_CONNECTION 0x0001 /* 0 for ep1out/ep2in */
+
+#define MST_R_BITS (MST_EOPB_DIS|MST_EOPB_ENA \
+ |MST_RD_ENA|MST_RD_RESET)
+#define MST_W_BITS (MST_TIMEOUT_DIS|MST_TIMEOUT_ENA \
+ |MST_WR_ENA|MST_WR_RESET)
+#define MST_RW_BITS (MST_R_BITS|MST_W_BITS \
+ |MST_CONNECTION)
+
+/* these values assume (dma_master & MST_CONNECTION) == 0 */
+#define UDC_MSTWR_ENDPOINT 1
+#define UDC_MSTRD_ENDPOINT 2
+
+ /* dma master write */
+ u32 out_dma_start;
+ u32 out_dma_end;
+ u32 out_dma_current;
+
+ /* dma master read */
+ u32 in_dma_start;
+ u32 in_dma_end;
+ u32 in_dma_current;
+
+ u32 power_detect;
+#define PW_DETECT 0x04
+#define PW_RESETB 0x02
+#define PW_PULLUP 0x01
+
+ u8 _reserved0 [0x1d8];
+
+ /* endpoint registers */
+ u32 ep_fifo [4]; /* 0x200 */
+ u8 _reserved1 [0x10];
+ u32 ep_mode [4]; /* only 1-3 valid */
+ u8 _reserved2 [0x10];
+
+ u32 ep_status [4];
+#define EPxSTATUS_TOGGLE 0x40
+#define EPxSTATUS_SUSPEND 0x20
+#define EPxSTATUS_EP_MASK (0x07<<2)
+# define EPxSTATUS_EP_READY (0<<2)
+# define EPxSTATUS_EP_DATAIN (1<<2)
+# define EPxSTATUS_EP_FULL (2<<2)
+# define EPxSTATUS_EP_TX_ERR (3<<2)
+# define EPxSTATUS_EP_RX_ERR (4<<2)
+# define EPxSTATUS_EP_BUSY (5<<2)
+# define EPxSTATUS_EP_STALL (6<<2)
+# define EPxSTATUS_EP_INVALID (7<<2)
+#define EPxSTATUS_FIFO_DISABLE 0x02
+#define EPxSTATUS_STAGE_ERROR 0x01
+
+ u8 _reserved3 [0x10];
+ u32 EPxSizeLA[4];
+#define PACKET_ACTIVE (1<<7)
+#define DATASIZE 0x7f
+ u8 _reserved3a [0x10];
+ u32 EPxSizeLB[4]; /* only 1,2 valid */
+ u8 _reserved3b [0x10];
+ u32 EPxSizeHA[4]; /* only 1-3 valid */
+ u8 _reserved3c [0x10];
+ u32 EPxSizeHB[4]; /* only 1,2 valid */
+ u8 _reserved4[0x30];
+
+ /* SETUP packet contents */
+ u32 bRequestType; /* 0x300 */
+ u32 bRequest;
+ u32 wValueL;
+ u32 wValueH;
+ u32 wIndexL;
+ u32 wIndexH;
+ u32 wLengthL;
+ u32 wLengthH;
+
+ /* command interaction/handshaking */
+ u32 SetupRecv; /* 0x320 */
+ u32 CurrConfig;
+ u32 StdRequest;
+ u32 Request;
+ u32 DataSet;
+#define DATASET_A(epnum) (1<<(2*(epnum)))
+#define DATASET_B(epnum) (2<<(2*(epnum)))
+#define DATASET_AB(epnum) (3<<(2*(epnum)))
+ u8 _reserved5[4];
+
+ u32 UsbState;
+#define USBSTATE_CONFIGURED 0x04
+#define USBSTATE_ADDRESSED 0x02
+#define USBSTATE_DEFAULT 0x01
+
+ u32 EOP;
+
+ u32 Command; /* 0x340 */
+#define COMMAND_SETDATA0 2
+#define COMMAND_RESET 3
+#define COMMAND_STALL 4
+#define COMMAND_INVALID 5
+#define COMMAND_FIFO_DISABLE 7
+#define COMMAND_FIFO_ENABLE 8
+#define COMMAND_INIT_DESCRIPTOR 9
+#define COMMAND_FIFO_CLEAR 10 /* also stall */
+#define COMMAND_STALL_CLEAR 11
+#define COMMAND_EP(n) ((n) << 4)
+
+ u32 EPxSingle;
+ u8 _reserved6[4];
+ u32 EPxBCS;
+ u8 _reserved7[8];
+ u32 IntControl;
+#define ICONTROL_STATUSNAK 1
+ u8 _reserved8[4];
+
+ u32 reqmode; // 0x360 standard request mode, low 8 bits
+#define G_REQMODE_SET_INTF (1<<7)
+#define G_REQMODE_GET_INTF (1<<6)
+#define G_REQMODE_SET_CONF (1<<5)
+#define G_REQMODE_GET_CONF (1<<4)
+#define G_REQMODE_GET_DESC (1<<3)
+#define G_REQMODE_SET_FEAT (1<<2)
+#define G_REQMODE_CLEAR_FEAT (1<<1)
+#define G_REQMODE_GET_STATUS (1<<0)
+
+ u32 ReqMode;
+ u8 _reserved9[0x18];
+ u32 PortStatus; /* 0x380 */
+ u8 _reserved10[8];
+ u32 address;
+ u32 buff_test;
+ u8 _reserved11[4];
+ u32 UsbReady;
+ u8 _reserved12[4];
+ u32 SetDescStall; /* 0x3a0 */
+ u8 _reserved13[0x45c];
+
+ /* hardware could handle limited GET_DESCRIPTOR duties */
+#define DESC_LEN 0x80
+ u32 descriptors[DESC_LEN]; /* 0x800 */
+ u8 _reserved14[0x600];
+
+} __attribute__ ((packed));
+
+#define MAX_FIFO_SIZE 64
+#define MAX_EP0_SIZE 8 /* ep0 fifo is bigger, though */
+
+
+/*-------------------------------------------------------------------------*/
+
+/* DRIVER DATA STRUCTURES and UTILITIES */
+
+struct goku_ep {
+ struct usb_ep ep;
+ struct goku_udc *dev;
+ unsigned long irqs;
+
+ unsigned num:8,
+ dma:1,
+ is_in:1,
+ stopped:1;
+
+ /* analogous to a host-side qh */
+ struct list_head queue;
+ const struct usb_endpoint_descriptor *desc;
+
+ u32 __iomem *reg_fifo;
+ u32 __iomem *reg_mode;
+ u32 __iomem *reg_status;
+};
+
+struct goku_request {
+ struct usb_request req;
+ struct list_head queue;
+
+ unsigned mapped:1;
+};
+
+enum ep0state {
+ EP0_DISCONNECT, /* no host */
+ EP0_IDLE, /* between STATUS ack and SETUP report */
+ EP0_IN, EP0_OUT, /* data stage */
+ EP0_STATUS, /* status stage */
+ EP0_STALL, /* data or status stages */
+ EP0_SUSPEND, /* usb suspend */
+};
+
+struct goku_udc {
+ /* each pci device provides one gadget, several endpoints */
+ struct usb_gadget gadget;
+ spinlock_t lock;
+ struct goku_ep ep[4];
+ struct usb_gadget_driver *driver;
+
+ enum ep0state ep0state;
+ unsigned got_irq:1,
+ got_region:1,
+ req_config:1,
+ configured:1,
+ enabled:1;
+
+ /* pci state used to access those endpoints */
+ struct pci_dev *pdev;
+ struct goku_udc_regs __iomem *regs;
+ u32 int_enable;
+
+ /* statistics... */
+ unsigned long irqs;
+};
+
+/*-------------------------------------------------------------------------*/
+
+#define xprintk(dev,level,fmt,args...) \
+ printk(level "%s %s: " fmt , driver_name , \
+ pci_name(dev->pdev) , ## args)
+
+#ifdef DEBUG
+#define DBG(dev,fmt,args...) \
+ xprintk(dev , KERN_DEBUG , fmt , ## args)
+#else
+#define DBG(dev,fmt,args...) \
+ do { } while (0)
+#endif /* DEBUG */
+
+#ifdef VERBOSE
+#define VDBG DBG
+#else
+#define VDBG(dev,fmt,args...) \
+ do { } while (0)
+#endif /* VERBOSE */
+
+#define ERROR(dev,fmt,args...) \
+ xprintk(dev , KERN_ERR , fmt , ## args)
+#define WARN(dev,fmt,args...) \
+ xprintk(dev , KERN_WARNING , fmt , ## args)
+#define INFO(dev,fmt,args...) \
+ xprintk(dev , KERN_INFO , fmt , ## args)
+
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
new file mode 100644
index 00000000000..2cff67ccce4
--- /dev/null
+++ b/drivers/usb/gadget/inode.c
@@ -0,0 +1,2110 @@
+/*
+ * inode.c -- user mode filesystem api for usb gadget controllers
+ *
+ * Copyright (C) 2003-2004 David Brownell
+ * Copyright (C) 2003 Agilent Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+
+// #define DEBUG /* data to help fault diagnosis */
+// #define VERBOSE /* extra debug messages (success too) */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/pagemap.h>
+#include <linux/uts.h>
+#include <linux/wait.h>
+#include <linux/compiler.h>
+#include <asm/uaccess.h>
+#include <linux/slab.h>
+
+#include <linux/device.h>
+#include <linux/moduleparam.h>
+
+#include <linux/usb_gadgetfs.h>
+#include <linux/usb_gadget.h>
+
+
+/*
+ * The gadgetfs API maps each endpoint to a file descriptor so that you
+ * can use standard synchronous read/write calls for I/O. There's some
+ * O_NONBLOCK and O_ASYNC/FASYNC style i/o support. Example usermode
+ * drivers show how this works in practice. You can also use AIO to
+ * eliminate I/O gaps between requests, to help when streaming data.
+ *
+ * Key parts that must be USB-specific are protocols defining how the
+ * read/write operations relate to the hardware state machines. There
+ * are two types of files. One type is for the device, implementing ep0.
+ * The other type is for each IN or OUT endpoint. In both cases, the
+ * user mode driver must configure the hardware before using it.
+ *
+ * - First, dev_config() is called when /dev/gadget/$CHIP is configured
+ * (by writing configuration and device descriptors). Afterwards it
+ * may serve as a source of device events, used to handle all control
+ * requests other than basic enumeration.
+ *
+ * - Then either immediately, or after a SET_CONFIGURATION control request,
+ * ep_config() is called when each /dev/gadget/ep* file is configured
+ * (by writing endpoint descriptors). Afterwards these files are used
+ * to write() IN data or to read() OUT data. To halt the endpoint, a
+ * "wrong direction" request is issued (like reading an IN endpoint).
+ *
+ * Unlike "usbfs" the only ioctl()s are for things that are rare, and maybe
+ * not possible on all hardware. For example, precise fault handling with
+ * respect to data left in endpoint fifos after aborted operations; or
+ * selective clearing of endpoint halts, to implement SET_INTERFACE.
+ */
+
+#define DRIVER_DESC "USB Gadget filesystem"
+#define DRIVER_VERSION "24 Aug 2004"
+
+static const char driver_desc [] = DRIVER_DESC;
+static const char shortname [] = "gadgetfs";
+
+MODULE_DESCRIPTION (DRIVER_DESC);
+MODULE_AUTHOR ("David Brownell");
+MODULE_LICENSE ("GPL");
+
+
+/*----------------------------------------------------------------------*/
+
+#define GADGETFS_MAGIC 0xaee71ee7
+#define DMA_ADDR_INVALID (~(dma_addr_t)0)
+
+/* /dev/gadget/$CHIP represents ep0 and the whole device */
+enum ep0_state {
+ /* DISBLED is the initial state.
+ */
+ STATE_DEV_DISABLED = 0,
+
+ /* Only one open() of /dev/gadget/$CHIP; only one file tracks
+ * ep0/device i/o modes and binding to the controller. Driver
+ * must always write descriptors to initialize the device, then
+ * the device becomes UNCONNECTED until enumeration.
+ */
+ STATE_OPENED,
+
+ /* From then on, ep0 fd is in either of two basic modes:
+ * - (UN)CONNECTED: read usb_gadgetfs_event(s) from it
+ * - SETUP: read/write will transfer control data and succeed;
+ * or if "wrong direction", performs protocol stall
+ */
+ STATE_UNCONNECTED,
+ STATE_CONNECTED,
+ STATE_SETUP,
+
+ /* UNBOUND means the driver closed ep0, so the device won't be
+ * accessible again (DEV_DISABLED) until all fds are closed.
+ */
+ STATE_DEV_UNBOUND,
+};
+
+/* enough for the whole queue: most events invalidate others */
+#define N_EVENT 5
+
+struct dev_data {
+ spinlock_t lock;
+ atomic_t count;
+ enum ep0_state state;
+ struct usb_gadgetfs_event event [N_EVENT];
+ unsigned ev_next;
+ struct fasync_struct *fasync;
+ u8 current_config;
+
+ /* drivers reading ep0 MUST handle control requests (SETUP)
+ * reported that way; else the host will time out.
+ */
+ unsigned usermode_setup : 1,
+ setup_in : 1,
+ setup_can_stall : 1,
+ setup_out_ready : 1,
+ setup_out_error : 1,
+ setup_abort : 1;
+
+ /* the rest is basically write-once */
+ struct usb_config_descriptor *config, *hs_config;
+ struct usb_device_descriptor *dev;
+ struct usb_request *req;
+ struct usb_gadget *gadget;
+ struct list_head epfiles;
+ void *buf;
+ wait_queue_head_t wait;
+ struct super_block *sb;
+ struct dentry *dentry;
+
+ /* except this scratch i/o buffer for ep0 */
+ u8 rbuf [256];
+};
+
+static inline void get_dev (struct dev_data *data)
+{
+ atomic_inc (&data->count);
+}
+
+static void put_dev (struct dev_data *data)
+{
+ if (likely (!atomic_dec_and_test (&data->count)))
+ return;
+ /* needs no more cleanup */
+ BUG_ON (waitqueue_active (&data->wait));
+ kfree (data);
+}
+
+static struct dev_data *dev_new (void)
+{
+ struct dev_data *dev;
+
+ dev = kmalloc (sizeof *dev, GFP_KERNEL);
+ if (!dev)
+ return NULL;
+ memset (dev, 0, sizeof *dev);
+ dev->state = STATE_DEV_DISABLED;
+ atomic_set (&dev->count, 1);
+ spin_lock_init (&dev->lock);
+ INIT_LIST_HEAD (&dev->epfiles);
+ init_waitqueue_head (&dev->wait);
+ return dev;
+}
+
+/*----------------------------------------------------------------------*/
+
+/* other /dev/gadget/$ENDPOINT files represent endpoints */
+enum ep_state {
+ STATE_EP_DISABLED = 0,
+ STATE_EP_READY,
+ STATE_EP_DEFER_ENABLE,
+ STATE_EP_ENABLED,
+ STATE_EP_UNBOUND,
+};
+
+struct ep_data {
+ struct semaphore lock;
+ enum ep_state state;
+ atomic_t count;
+ struct dev_data *dev;
+ /* must hold dev->lock before accessing ep or req */
+ struct usb_ep *ep;
+ struct usb_request *req;
+ ssize_t status;
+ char name [16];
+ struct usb_endpoint_descriptor desc, hs_desc;
+ struct list_head epfiles;
+ wait_queue_head_t wait;
+ struct dentry *dentry;
+ struct inode *inode;
+};
+
+static inline void get_ep (struct ep_data *data)
+{
+ atomic_inc (&data->count);
+}
+
+static void put_ep (struct ep_data *data)
+{
+ if (likely (!atomic_dec_and_test (&data->count)))
+ return;
+ put_dev (data->dev);
+ /* needs no more cleanup */
+ BUG_ON (!list_empty (&data->epfiles));
+ BUG_ON (waitqueue_active (&data->wait));
+ BUG_ON (down_trylock (&data->lock) != 0);
+ kfree (data);
+}
+
+/*----------------------------------------------------------------------*/
+
+/* most "how to use the hardware" policy choices are in userspace:
+ * mapping endpoint roles (which the driver needs) to the capabilities
+ * which the usb controller has. most of those capabilities are exposed
+ * implicitly, starting with the driver name and then endpoint names.
+ */
+
+static const char *CHIP;
+
+/*----------------------------------------------------------------------*/
+
+/* NOTE: don't use dev_printk calls before binding to the gadget
+ * at the end of ep0 configuration, or after unbind.
+ */
+
+/* too wordy: dev_printk(level , &(d)->gadget->dev , fmt , ## args) */
+#define xprintk(d,level,fmt,args...) \
+ printk(level "%s: " fmt , shortname , ## args)
+
+#ifdef DEBUG
+#define DBG(dev,fmt,args...) \
+ xprintk(dev , KERN_DEBUG , fmt , ## args)
+#else
+#define DBG(dev,fmt,args...) \
+ do { } while (0)
+#endif /* DEBUG */
+
+#ifdef VERBOSE
+#define VDEBUG DBG
+#else
+#define VDEBUG(dev,fmt,args...) \
+ do { } while (0)
+#endif /* DEBUG */
+
+#define ERROR(dev,fmt,args...) \
+ xprintk(dev , KERN_ERR , fmt , ## args)
+#define WARN(dev,fmt,args...) \
+ xprintk(dev , KERN_WARNING , fmt , ## args)
+#define INFO(dev,fmt,args...) \
+ xprintk(dev , KERN_INFO , fmt , ## args)
+
+
+/*----------------------------------------------------------------------*/
+
+/* SYNCHRONOUS ENDPOINT OPERATIONS (bulk/intr/iso)
+ *
+ * After opening, configure non-control endpoints. Then use normal
+ * stream read() and write() requests; and maybe ioctl() to get more
+ * precise FIFO status when recovering from cancelation.
+ */
+
+static void epio_complete (struct usb_ep *ep, struct usb_request *req)
+{
+ struct ep_data *epdata = ep->driver_data;
+
+ if (!req->context)
+ return;
+ if (req->status)
+ epdata->status = req->status;
+ else
+ epdata->status = req->actual;
+ complete ((struct completion *)req->context);
+}
+
+/* tasklock endpoint, returning when it's connected.
+ * still need dev->lock to use epdata->ep.
+ */
+static int
+get_ready_ep (unsigned f_flags, struct ep_data *epdata)
+{
+ int val;
+
+ if (f_flags & O_NONBLOCK) {
+ if (down_trylock (&epdata->lock) != 0)
+ goto nonblock;
+ if (epdata->state != STATE_EP_ENABLED) {
+ up (&epdata->lock);
+nonblock:
+ val = -EAGAIN;
+ } else
+ val = 0;
+ return val;
+ }
+
+ if ((val = down_interruptible (&epdata->lock)) < 0)
+ return val;
+newstate:
+ switch (epdata->state) {
+ case STATE_EP_ENABLED:
+ break;
+ case STATE_EP_DEFER_ENABLE:
+ DBG (epdata->dev, "%s wait for host\n", epdata->name);
+ if ((val = wait_event_interruptible (epdata->wait,
+ epdata->state != STATE_EP_DEFER_ENABLE
+ || epdata->dev->state == STATE_DEV_UNBOUND
+ )) < 0)
+ goto fail;
+ goto newstate;
+ // case STATE_EP_DISABLED: /* "can't happen" */
+ // case STATE_EP_READY: /* "can't happen" */
+ default: /* error! */
+ pr_debug ("%s: ep %p not available, state %d\n",
+ shortname, epdata, epdata->state);
+ // FALLTHROUGH
+ case STATE_EP_UNBOUND: /* clean disconnect */
+ val = -ENODEV;
+fail:
+ up (&epdata->lock);
+ }
+ return val;
+}
+
+static ssize_t
+ep_io (struct ep_data *epdata, void *buf, unsigned len)
+{
+ DECLARE_COMPLETION (done);
+ int value;
+
+ spin_lock_irq (&epdata->dev->lock);
+ if (likely (epdata->ep != NULL)) {
+ struct usb_request *req = epdata->req;
+
+ req->context = &done;
+ req->complete = epio_complete;
+ req->buf = buf;
+ req->length = len;
+ value = usb_ep_queue (epdata->ep, req, GFP_ATOMIC);
+ } else
+ value = -ENODEV;
+ spin_unlock_irq (&epdata->dev->lock);
+
+ if (likely (value == 0)) {
+ value = wait_event_interruptible (done.wait, done.done);
+ if (value != 0) {
+ spin_lock_irq (&epdata->dev->lock);
+ if (likely (epdata->ep != NULL)) {
+ DBG (epdata->dev, "%s i/o interrupted\n",
+ epdata->name);
+ usb_ep_dequeue (epdata->ep, epdata->req);
+ spin_unlock_irq (&epdata->dev->lock);
+
+ wait_event (done.wait, done.done);
+ if (epdata->status == -ECONNRESET)
+ epdata->status = -EINTR;
+ } else {
+ spin_unlock_irq (&epdata->dev->lock);
+
+ DBG (epdata->dev, "endpoint gone\n");
+ epdata->status = -ENODEV;
+ }
+ }
+ return epdata->status;
+ }
+ return value;
+}
+
+
+/* handle a synchronous OUT bulk/intr/iso transfer */
+static ssize_t
+ep_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr)
+{
+ struct ep_data *data = fd->private_data;
+ void *kbuf;
+ ssize_t value;
+
+ if ((value = get_ready_ep (fd->f_flags, data)) < 0)
+ return value;
+
+ /* halt any endpoint by doing a "wrong direction" i/o call */
+ if (data->desc.bEndpointAddress & USB_DIR_IN) {
+ if ((data->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ == USB_ENDPOINT_XFER_ISOC)
+ return -EINVAL;
+ DBG (data->dev, "%s halt\n", data->name);
+ spin_lock_irq (&data->dev->lock);
+ if (likely (data->ep != NULL))
+ usb_ep_set_halt (data->ep);
+ spin_unlock_irq (&data->dev->lock);
+ up (&data->lock);
+ return -EBADMSG;
+ }
+
+ /* FIXME readahead for O_NONBLOCK and poll(); careful with ZLPs */
+
+ value = -ENOMEM;
+ kbuf = kmalloc (len, SLAB_KERNEL);
+ if (unlikely (!kbuf))
+ goto free1;
+
+ value = ep_io (data, kbuf, len);
+ VDEBUG (data->dev, "%s read %d OUT, status %d\n",
+ data->name, len, value);
+ if (value >= 0 && copy_to_user (buf, kbuf, value))
+ value = -EFAULT;
+
+free1:
+ up (&data->lock);
+ kfree (kbuf);
+ return value;
+}
+
+/* handle a synchronous IN bulk/intr/iso transfer */
+static ssize_t
+ep_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
+{
+ struct ep_data *data = fd->private_data;
+ void *kbuf;
+ ssize_t value;
+
+ if ((value = get_ready_ep (fd->f_flags, data)) < 0)
+ return value;
+
+ /* halt any endpoint by doing a "wrong direction" i/o call */
+ if (!(data->desc.bEndpointAddress & USB_DIR_IN)) {
+ if ((data->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ == USB_ENDPOINT_XFER_ISOC)
+ return -EINVAL;
+ DBG (data->dev, "%s halt\n", data->name);
+ spin_lock_irq (&data->dev->lock);
+ if (likely (data->ep != NULL))
+ usb_ep_set_halt (data->ep);
+ spin_unlock_irq (&data->dev->lock);
+ up (&data->lock);
+ return -EBADMSG;
+ }
+
+ /* FIXME writebehind for O_NONBLOCK and poll(), qlen = 1 */
+
+ value = -ENOMEM;
+ kbuf = kmalloc (len, SLAB_KERNEL);
+ if (!kbuf)
+ goto free1;
+ if (copy_from_user (kbuf, buf, len)) {
+ value = -EFAULT;
+ goto free1;
+ }
+
+ value = ep_io (data, kbuf, len);
+ VDEBUG (data->dev, "%s write %d IN, status %d\n",
+ data->name, len, value);
+free1:
+ up (&data->lock);
+ kfree (kbuf);
+ return value;
+}
+
+static int
+ep_release (struct inode *inode, struct file *fd)
+{
+ struct ep_data *data = fd->private_data;
+
+ /* clean up if this can be reopened */
+ if (data->state != STATE_EP_UNBOUND) {
+ data->state = STATE_EP_DISABLED;
+ data->desc.bDescriptorType = 0;
+ data->hs_desc.bDescriptorType = 0;
+ }
+ put_ep (data);
+ return 0;
+}
+
+static int ep_ioctl (struct inode *inode, struct file *fd,
+ unsigned code, unsigned long value)
+{
+ struct ep_data *data = fd->private_data;
+ int status;
+
+ if ((status = get_ready_ep (fd->f_flags, data)) < 0)
+ return status;
+
+ spin_lock_irq (&data->dev->lock);
+ if (likely (data->ep != NULL)) {
+ switch (code) {
+ case GADGETFS_FIFO_STATUS:
+ status = usb_ep_fifo_status (data->ep);
+ break;
+ case GADGETFS_FIFO_FLUSH:
+ usb_ep_fifo_flush (data->ep);
+ break;
+ case GADGETFS_CLEAR_HALT:
+ status = usb_ep_clear_halt (data->ep);
+ break;
+ default:
+ status = -ENOTTY;
+ }
+ } else
+ status = -ENODEV;
+ spin_unlock_irq (&data->dev->lock);
+ up (&data->lock);
+ return status;
+}
+
+/*----------------------------------------------------------------------*/
+
+/* ASYNCHRONOUS ENDPOINT I/O OPERATIONS (bulk/intr/iso) */
+
+struct kiocb_priv {
+ struct usb_request *req;
+ struct ep_data *epdata;
+ void *buf;
+ char __user *ubuf;
+ unsigned actual;
+};
+
+static int ep_aio_cancel(struct kiocb *iocb, struct io_event *e)
+{
+ struct kiocb_priv *priv = iocb->private;
+ struct ep_data *epdata;
+ int value;
+
+ local_irq_disable();
+ epdata = priv->epdata;
+ // spin_lock(&epdata->dev->lock);
+ kiocbSetCancelled(iocb);
+ if (likely(epdata && epdata->ep && priv->req))
+ value = usb_ep_dequeue (epdata->ep, priv->req);
+ else
+ value = -EINVAL;
+ // spin_unlock(&epdata->dev->lock);
+ local_irq_enable();
+
+ aio_put_req(iocb);
+ return value;
+}
+
+static ssize_t ep_aio_read_retry(struct kiocb *iocb)
+{
+ struct kiocb_priv *priv = iocb->private;
+ ssize_t status = priv->actual;
+
+ /* we "retry" to get the right mm context for this: */
+ status = copy_to_user(priv->ubuf, priv->buf, priv->actual);
+ if (unlikely(0 != status))
+ status = -EFAULT;
+ else
+ status = priv->actual;
+ kfree(priv->buf);
+ kfree(priv);
+ aio_put_req(iocb);
+ return status;
+}
+
+static void ep_aio_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ struct kiocb *iocb = req->context;
+ struct kiocb_priv *priv = iocb->private;
+ struct ep_data *epdata = priv->epdata;
+
+ /* lock against disconnect (and ideally, cancel) */
+ spin_lock(&epdata->dev->lock);
+ priv->req = NULL;
+ priv->epdata = NULL;
+ if (NULL == iocb->ki_retry
+ || unlikely(0 == req->actual)
+ || unlikely(kiocbIsCancelled(iocb))) {
+ kfree(req->buf);
+ kfree(priv);
+ iocb->private = NULL;
+ /* aio_complete() reports bytes-transferred _and_ faults */
+ if (unlikely(kiocbIsCancelled(iocb)))
+ aio_put_req(iocb);
+ else
+ aio_complete(iocb,
+ req->actual ? req->actual : req->status,
+ req->status);
+ } else {
+ /* retry() won't report both; so we hide some faults */
+ if (unlikely(0 != req->status))
+ DBG(epdata->dev, "%s fault %d len %d\n",
+ ep->name, req->status, req->actual);
+
+ priv->buf = req->buf;
+ priv->actual = req->actual;
+ kick_iocb(iocb);
+ }
+ spin_unlock(&epdata->dev->lock);
+
+ usb_ep_free_request(ep, req);
+ put_ep(epdata);
+}
+
+static ssize_t
+ep_aio_rwtail(
+ struct kiocb *iocb,
+ char *buf,
+ size_t len,
+ struct ep_data *epdata,
+ char __user *ubuf
+)
+{
+ struct kiocb_priv *priv = (void *) &iocb->private;
+ struct usb_request *req;
+ ssize_t value;
+
+ priv = kmalloc(sizeof *priv, GFP_KERNEL);
+ if (!priv) {
+ value = -ENOMEM;
+fail:
+ kfree(buf);
+ return value;
+ }
+ iocb->private = priv;
+ priv->ubuf = ubuf;
+
+ value = get_ready_ep(iocb->ki_filp->f_flags, epdata);
+ if (unlikely(value < 0)) {
+ kfree(priv);
+ goto fail;
+ }
+
+ iocb->ki_cancel = ep_aio_cancel;
+ get_ep(epdata);
+ priv->epdata = epdata;
+ priv->actual = 0;
+
+ /* each kiocb is coupled to one usb_request, but we can't
+ * allocate or submit those if the host disconnected.
+ */
+ spin_lock_irq(&epdata->dev->lock);
+ if (likely(epdata->ep)) {
+ req = usb_ep_alloc_request(epdata->ep, GFP_ATOMIC);
+ if (likely(req)) {
+ priv->req = req;
+ req->buf = buf;
+ req->length = len;
+ req->complete = ep_aio_complete;
+ req->context = iocb;
+ value = usb_ep_queue(epdata->ep, req, GFP_ATOMIC);
+ if (unlikely(0 != value))
+ usb_ep_free_request(epdata->ep, req);
+ } else
+ value = -EAGAIN;
+ } else
+ value = -ENODEV;
+ spin_unlock_irq(&epdata->dev->lock);
+
+ up(&epdata->lock);
+
+ if (unlikely(value)) {
+ kfree(priv);
+ put_ep(epdata);
+ } else
+ value = -EIOCBQUEUED;
+ return value;
+}
+
+static ssize_t
+ep_aio_read(struct kiocb *iocb, char __user *ubuf, size_t len, loff_t o)
+{
+ struct ep_data *epdata = iocb->ki_filp->private_data;
+ char *buf;
+
+ if (unlikely(epdata->desc.bEndpointAddress & USB_DIR_IN))
+ return -EINVAL;
+ buf = kmalloc(len, GFP_KERNEL);
+ if (unlikely(!buf))
+ return -ENOMEM;
+ iocb->ki_retry = ep_aio_read_retry;
+ return ep_aio_rwtail(iocb, buf, len, epdata, ubuf);
+}
+
+static ssize_t
+ep_aio_write(struct kiocb *iocb, const char __user *ubuf, size_t len, loff_t o)
+{
+ struct ep_data *epdata = iocb->ki_filp->private_data;
+ char *buf;
+
+ if (unlikely(!(epdata->desc.bEndpointAddress & USB_DIR_IN)))
+ return -EINVAL;
+ buf = kmalloc(len, GFP_KERNEL);
+ if (unlikely(!buf))
+ return -ENOMEM;
+ if (unlikely(copy_from_user(buf, ubuf, len) != 0)) {
+ kfree(buf);
+ return -EFAULT;
+ }
+ return ep_aio_rwtail(iocb, buf, len, epdata, NULL);
+}
+
+/*----------------------------------------------------------------------*/
+
+/* used after endpoint configuration */
+static struct file_operations ep_io_operations = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+
+ .read = ep_read,
+ .write = ep_write,
+ .ioctl = ep_ioctl,
+ .release = ep_release,
+
+ .aio_read = ep_aio_read,
+ .aio_write = ep_aio_write,
+};
+
+/* ENDPOINT INITIALIZATION
+ *
+ * fd = open ("/dev/gadget/$ENDPOINT", O_RDWR)
+ * status = write (fd, descriptors, sizeof descriptors)
+ *
+ * That write establishes the endpoint configuration, configuring
+ * the controller to process bulk, interrupt, or isochronous transfers
+ * at the right maxpacket size, and so on.
+ *
+ * The descriptors are message type 1, identified by a host order u32
+ * at the beginning of what's written. Descriptor order is: full/low
+ * speed descriptor, then optional high speed descriptor.
+ */
+static ssize_t
+ep_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
+{
+ struct ep_data *data = fd->private_data;
+ struct usb_ep *ep;
+ u32 tag;
+ int value;
+
+ if ((value = down_interruptible (&data->lock)) < 0)
+ return value;
+
+ if (data->state != STATE_EP_READY) {
+ value = -EL2HLT;
+ goto fail;
+ }
+
+ value = len;
+ if (len < USB_DT_ENDPOINT_SIZE + 4)
+ goto fail0;
+
+ /* we might need to change message format someday */
+ if (copy_from_user (&tag, buf, 4)) {
+ goto fail1;
+ }
+ if (tag != 1) {
+ DBG(data->dev, "config %s, bad tag %d\n", data->name, tag);
+ goto fail0;
+ }
+ buf += 4;
+ len -= 4;
+
+ /* NOTE: audio endpoint extensions not accepted here;
+ * just don't include the extra bytes.
+ */
+
+ /* full/low speed descriptor, then high speed */
+ if (copy_from_user (&data->desc, buf, USB_DT_ENDPOINT_SIZE)) {
+ goto fail1;
+ }
+ if (data->desc.bLength != USB_DT_ENDPOINT_SIZE
+ || data->desc.bDescriptorType != USB_DT_ENDPOINT)
+ goto fail0;
+ if (len != USB_DT_ENDPOINT_SIZE) {
+ if (len != 2 * USB_DT_ENDPOINT_SIZE)
+ goto fail0;
+ if (copy_from_user (&data->hs_desc, buf + USB_DT_ENDPOINT_SIZE,
+ USB_DT_ENDPOINT_SIZE)) {
+ goto fail1;
+ }
+ if (data->hs_desc.bLength != USB_DT_ENDPOINT_SIZE
+ || data->hs_desc.bDescriptorType
+ != USB_DT_ENDPOINT) {
+ DBG(data->dev, "config %s, bad hs length or type\n",
+ data->name);
+ goto fail0;
+ }
+ }
+ value = len;
+
+ spin_lock_irq (&data->dev->lock);
+ if (data->dev->state == STATE_DEV_UNBOUND) {
+ value = -ENOENT;
+ goto gone;
+ } else if ((ep = data->ep) == NULL) {
+ value = -ENODEV;
+ goto gone;
+ }
+ switch (data->dev->gadget->speed) {
+ case USB_SPEED_LOW:
+ case USB_SPEED_FULL:
+ value = usb_ep_enable (ep, &data->desc);
+ if (value == 0)
+ data->state = STATE_EP_ENABLED;
+ break;
+#ifdef HIGHSPEED
+ case USB_SPEED_HIGH:
+ /* fails if caller didn't provide that descriptor... */
+ value = usb_ep_enable (ep, &data->hs_desc);
+ if (value == 0)
+ data->state = STATE_EP_ENABLED;
+ break;
+#endif
+ default:
+ DBG (data->dev, "unconnected, %s init deferred\n",
+ data->name);
+ data->state = STATE_EP_DEFER_ENABLE;
+ }
+ if (value == 0)
+ fd->f_op = &ep_io_operations;
+gone:
+ spin_unlock_irq (&data->dev->lock);
+ if (value < 0) {
+fail:
+ data->desc.bDescriptorType = 0;
+ data->hs_desc.bDescriptorType = 0;
+ }
+ up (&data->lock);
+ return value;
+fail0:
+ value = -EINVAL;
+ goto fail;
+fail1:
+ value = -EFAULT;
+ goto fail;
+}
+
+static int
+ep_open (struct inode *inode, struct file *fd)
+{
+ struct ep_data *data = inode->u.generic_ip;
+ int value = -EBUSY;
+
+ if (down_interruptible (&data->lock) != 0)
+ return -EINTR;
+ spin_lock_irq (&data->dev->lock);
+ if (data->dev->state == STATE_DEV_UNBOUND)
+ value = -ENOENT;
+ else if (data->state == STATE_EP_DISABLED) {
+ value = 0;
+ data->state = STATE_EP_READY;
+ get_ep (data);
+ fd->private_data = data;
+ VDEBUG (data->dev, "%s ready\n", data->name);
+ } else
+ DBG (data->dev, "%s state %d\n",
+ data->name, data->state);
+ spin_unlock_irq (&data->dev->lock);
+ up (&data->lock);
+ return value;
+}
+
+/* used before endpoint configuration */
+static struct file_operations ep_config_operations = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+
+ .open = ep_open,
+ .write = ep_config,
+ .release = ep_release,
+};
+
+/*----------------------------------------------------------------------*/
+
+/* EP0 IMPLEMENTATION can be partly in userspace.
+ *
+ * Drivers that use this facility receive various events, including
+ * control requests the kernel doesn't handle. Drivers that don't
+ * use this facility may be too simple-minded for real applications.
+ */
+
+static inline void ep0_readable (struct dev_data *dev)
+{
+ wake_up (&dev->wait);
+ kill_fasync (&dev->fasync, SIGIO, POLL_IN);
+}
+
+static void clean_req (struct usb_ep *ep, struct usb_request *req)
+{
+ struct dev_data *dev = ep->driver_data;
+
+ if (req->buf != dev->rbuf) {
+ usb_ep_free_buffer (ep, req->buf, req->dma, req->length);
+ req->buf = dev->rbuf;
+ req->dma = DMA_ADDR_INVALID;
+ }
+ req->complete = epio_complete;
+ dev->setup_out_ready = 0;
+}
+
+static void ep0_complete (struct usb_ep *ep, struct usb_request *req)
+{
+ struct dev_data *dev = ep->driver_data;
+ int free = 1;
+
+ /* for control OUT, data must still get to userspace */
+ if (!dev->setup_in) {
+ dev->setup_out_error = (req->status != 0);
+ if (!dev->setup_out_error)
+ free = 0;
+ dev->setup_out_ready = 1;
+ ep0_readable (dev);
+ } else if (dev->state == STATE_SETUP)
+ dev->state = STATE_CONNECTED;
+
+ /* clean up as appropriate */
+ if (free && req->buf != &dev->rbuf)
+ clean_req (ep, req);
+ req->complete = epio_complete;
+}
+
+static int setup_req (struct usb_ep *ep, struct usb_request *req, u16 len)
+{
+ struct dev_data *dev = ep->driver_data;
+
+ if (dev->setup_out_ready) {
+ DBG (dev, "ep0 request busy!\n");
+ return -EBUSY;
+ }
+ if (len > sizeof (dev->rbuf))
+ req->buf = usb_ep_alloc_buffer (ep, len, &req->dma, GFP_ATOMIC);
+ if (req->buf == 0) {
+ req->buf = dev->rbuf;
+ return -ENOMEM;
+ }
+ req->complete = ep0_complete;
+ req->length = len;
+ return 0;
+}
+
+static ssize_t
+ep0_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr)
+{
+ struct dev_data *dev = fd->private_data;
+ ssize_t retval;
+ enum ep0_state state;
+
+ spin_lock_irq (&dev->lock);
+
+ /* report fd mode change before acting on it */
+ if (dev->setup_abort) {
+ dev->setup_abort = 0;
+ retval = -EIDRM;
+ goto done;
+ }
+
+ /* control DATA stage */
+ if ((state = dev->state) == STATE_SETUP) {
+
+ if (dev->setup_in) { /* stall IN */
+ VDEBUG(dev, "ep0in stall\n");
+ (void) usb_ep_set_halt (dev->gadget->ep0);
+ retval = -EL2HLT;
+ dev->state = STATE_CONNECTED;
+
+ } else if (len == 0) { /* ack SET_CONFIGURATION etc */
+ struct usb_ep *ep = dev->gadget->ep0;
+ struct usb_request *req = dev->req;
+
+ if ((retval = setup_req (ep, req, 0)) == 0)
+ retval = usb_ep_queue (ep, req, GFP_ATOMIC);
+ dev->state = STATE_CONNECTED;
+
+ /* assume that was SET_CONFIGURATION */
+ if (dev->current_config) {
+ unsigned power;
+#ifdef HIGHSPEED
+ if (dev->gadget->speed == USB_SPEED_HIGH)
+ power = dev->hs_config->bMaxPower;
+ else
+#endif
+ power = dev->config->bMaxPower;
+ usb_gadget_vbus_draw(dev->gadget, 2 * power);
+ }
+
+ } else { /* collect OUT data */
+ if ((fd->f_flags & O_NONBLOCK) != 0
+ && !dev->setup_out_ready) {
+ retval = -EAGAIN;
+ goto done;
+ }
+ spin_unlock_irq (&dev->lock);
+ retval = wait_event_interruptible (dev->wait,
+ dev->setup_out_ready != 0);
+
+ /* FIXME state could change from under us */
+ spin_lock_irq (&dev->lock);
+ if (retval)
+ goto done;
+ if (dev->setup_out_error)
+ retval = -EIO;
+ else {
+ len = min (len, (size_t)dev->req->actual);
+// FIXME don't call this with the spinlock held ...
+ if (copy_to_user (buf, &dev->req->buf, len))
+ retval = -EFAULT;
+ clean_req (dev->gadget->ep0, dev->req);
+ /* NOTE userspace can't yet choose to stall */
+ }
+ }
+ goto done;
+ }
+
+ /* else normal: return event data */
+ if (len < sizeof dev->event [0]) {
+ retval = -EINVAL;
+ goto done;
+ }
+ len -= len % sizeof (struct usb_gadgetfs_event);
+ dev->usermode_setup = 1;
+
+scan:
+ /* return queued events right away */
+ if (dev->ev_next != 0) {
+ unsigned i, n;
+ int tmp = dev->ev_next;
+
+ len = min (len, tmp * sizeof (struct usb_gadgetfs_event));
+ n = len / sizeof (struct usb_gadgetfs_event);
+
+ /* ep0 can't deliver events when STATE_SETUP */
+ for (i = 0; i < n; i++) {
+ if (dev->event [i].type == GADGETFS_SETUP) {
+ len = n = i + 1;
+ len *= sizeof (struct usb_gadgetfs_event);
+ n = 0;
+ break;
+ }
+ }
+ spin_unlock_irq (&dev->lock);
+ if (copy_to_user (buf, &dev->event, len))
+ retval = -EFAULT;
+ else
+ retval = len;
+ if (len > 0) {
+ len /= sizeof (struct usb_gadgetfs_event);
+
+ /* NOTE this doesn't guard against broken drivers;
+ * concurrent ep0 readers may lose events.
+ */
+ spin_lock_irq (&dev->lock);
+ dev->ev_next -= len;
+ if (dev->ev_next != 0)
+ memmove (&dev->event, &dev->event [len],
+ sizeof (struct usb_gadgetfs_event)
+ * (tmp - len));
+ if (n == 0)
+ dev->state = STATE_SETUP;
+ spin_unlock_irq (&dev->lock);
+ }
+ return retval;
+ }
+ if (fd->f_flags & O_NONBLOCK) {
+ retval = -EAGAIN;
+ goto done;
+ }
+
+ switch (state) {
+ default:
+ DBG (dev, "fail %s, state %d\n", __FUNCTION__, state);
+ retval = -ESRCH;
+ break;
+ case STATE_UNCONNECTED:
+ case STATE_CONNECTED:
+ spin_unlock_irq (&dev->lock);
+ DBG (dev, "%s wait\n", __FUNCTION__);
+
+ /* wait for events */
+ retval = wait_event_interruptible (dev->wait,
+ dev->ev_next != 0);
+ if (retval < 0)
+ return retval;
+ spin_lock_irq (&dev->lock);
+ goto scan;
+ }
+
+done:
+ spin_unlock_irq (&dev->lock);
+ return retval;
+}
+
+static struct usb_gadgetfs_event *
+next_event (struct dev_data *dev, enum usb_gadgetfs_event_type type)
+{
+ struct usb_gadgetfs_event *event;
+ unsigned i;
+
+ switch (type) {
+ /* these events purge the queue */
+ case GADGETFS_DISCONNECT:
+ if (dev->state == STATE_SETUP)
+ dev->setup_abort = 1;
+ // FALL THROUGH
+ case GADGETFS_CONNECT:
+ dev->ev_next = 0;
+ break;
+ case GADGETFS_SETUP: /* previous request timed out */
+ case GADGETFS_SUSPEND: /* same effect */
+ /* these events can't be repeated */
+ for (i = 0; i != dev->ev_next; i++) {
+ if (dev->event [i].type != type)
+ continue;
+ DBG (dev, "discard old event %d\n", type);
+ dev->ev_next--;
+ if (i == dev->ev_next)
+ break;
+ /* indices start at zero, for simplicity */
+ memmove (&dev->event [i], &dev->event [i + 1],
+ sizeof (struct usb_gadgetfs_event)
+ * (dev->ev_next - i));
+ }
+ break;
+ default:
+ BUG ();
+ }
+ event = &dev->event [dev->ev_next++];
+ BUG_ON (dev->ev_next > N_EVENT);
+ VDEBUG (dev, "ev %d, next %d\n", type, dev->ev_next);
+ memset (event, 0, sizeof *event);
+ event->type = type;
+ return event;
+}
+
+static ssize_t
+ep0_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
+{
+ struct dev_data *dev = fd->private_data;
+ ssize_t retval = -ESRCH;
+
+ spin_lock_irq (&dev->lock);
+
+ /* report fd mode change before acting on it */
+ if (dev->setup_abort) {
+ dev->setup_abort = 0;
+ retval = -EIDRM;
+
+ /* data and/or status stage for control request */
+ } else if (dev->state == STATE_SETUP) {
+
+ /* IN DATA+STATUS caller makes len <= wLength */
+ if (dev->setup_in) {
+ retval = setup_req (dev->gadget->ep0, dev->req, len);
+ if (retval == 0) {
+ spin_unlock_irq (&dev->lock);
+ if (copy_from_user (dev->req->buf, buf, len))
+ retval = -EFAULT;
+ else
+ retval = usb_ep_queue (
+ dev->gadget->ep0, dev->req,
+ GFP_KERNEL);
+ if (retval < 0) {
+ spin_lock_irq (&dev->lock);
+ clean_req (dev->gadget->ep0, dev->req);
+ spin_unlock_irq (&dev->lock);
+ } else
+ retval = len;
+
+ return retval;
+ }
+
+ /* can stall some OUT transfers */
+ } else if (dev->setup_can_stall) {
+ VDEBUG(dev, "ep0out stall\n");
+ (void) usb_ep_set_halt (dev->gadget->ep0);
+ retval = -EL2HLT;
+ dev->state = STATE_CONNECTED;
+ } else {
+ DBG(dev, "bogus ep0out stall!\n");
+ }
+ } else
+ DBG (dev, "fail %s, state %d\n", __FUNCTION__, dev->state);
+
+ spin_unlock_irq (&dev->lock);
+ return retval;
+}
+
+static int
+ep0_fasync (int f, struct file *fd, int on)
+{
+ struct dev_data *dev = fd->private_data;
+ // caller must F_SETOWN before signal delivery happens
+ VDEBUG (dev, "%s %s\n", __FUNCTION__, on ? "on" : "off");
+ return fasync_helper (f, fd, on, &dev->fasync);
+}
+
+static struct usb_gadget_driver gadgetfs_driver;
+
+static int
+dev_release (struct inode *inode, struct file *fd)
+{
+ struct dev_data *dev = fd->private_data;
+
+ /* closing ep0 === shutdown all */
+
+ usb_gadget_unregister_driver (&gadgetfs_driver);
+
+ /* at this point "good" hardware has disconnected the
+ * device from USB; the host won't see it any more.
+ * alternatively, all host requests will time out.
+ */
+
+ fasync_helper (-1, fd, 0, &dev->fasync);
+ kfree (dev->buf);
+ dev->buf = NULL;
+ put_dev (dev);
+
+ /* other endpoints were all decoupled from this device */
+ dev->state = STATE_DEV_DISABLED;
+ return 0;
+}
+
+static int dev_ioctl (struct inode *inode, struct file *fd,
+ unsigned code, unsigned long value)
+{
+ struct dev_data *dev = fd->private_data;
+ struct usb_gadget *gadget = dev->gadget;
+
+ if (gadget->ops->ioctl)
+ return gadget->ops->ioctl (gadget, code, value);
+ return -ENOTTY;
+}
+
+/* used after device configuration */
+static struct file_operations ep0_io_operations = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+
+ .read = ep0_read,
+ .write = ep0_write,
+ .fasync = ep0_fasync,
+ // .poll = ep0_poll,
+ .ioctl = dev_ioctl,
+ .release = dev_release,
+};
+
+/*----------------------------------------------------------------------*/
+
+/* The in-kernel gadget driver handles most ep0 issues, in particular
+ * enumerating the single configuration (as provided from user space).
+ *
+ * Unrecognized ep0 requests may be handled in user space.
+ */
+
+#ifdef HIGHSPEED
+static void make_qualifier (struct dev_data *dev)
+{
+ struct usb_qualifier_descriptor qual;
+ struct usb_device_descriptor *desc;
+
+ qual.bLength = sizeof qual;
+ qual.bDescriptorType = USB_DT_DEVICE_QUALIFIER;
+ qual.bcdUSB = __constant_cpu_to_le16 (0x0200);
+
+ desc = dev->dev;
+ qual.bDeviceClass = desc->bDeviceClass;
+ qual.bDeviceSubClass = desc->bDeviceSubClass;
+ qual.bDeviceProtocol = desc->bDeviceProtocol;
+
+ /* assumes ep0 uses the same value for both speeds ... */
+ qual.bMaxPacketSize0 = desc->bMaxPacketSize0;
+
+ qual.bNumConfigurations = 1;
+ qual.bRESERVED = 0;
+
+ memcpy (dev->rbuf, &qual, sizeof qual);
+}
+#endif
+
+static int
+config_buf (struct dev_data *dev, u8 type, unsigned index)
+{
+ int len;
+#ifdef HIGHSPEED
+ int hs;
+#endif
+
+ /* only one configuration */
+ if (index > 0)
+ return -EINVAL;
+
+#ifdef HIGHSPEED
+ hs = (dev->gadget->speed == USB_SPEED_HIGH);
+ if (type == USB_DT_OTHER_SPEED_CONFIG)
+ hs = !hs;
+ if (hs) {
+ dev->req->buf = dev->hs_config;
+ len = le16_to_cpup (&dev->hs_config->wTotalLength);
+ } else
+#endif
+ {
+ dev->req->buf = dev->config;
+ len = le16_to_cpup (&dev->config->wTotalLength);
+ }
+ ((u8 *)dev->req->buf) [1] = type;
+ return len;
+}
+
+static int
+gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
+{
+ struct dev_data *dev = get_gadget_data (gadget);
+ struct usb_request *req = dev->req;
+ int value = -EOPNOTSUPP;
+ struct usb_gadgetfs_event *event;
+ u16 w_value = ctrl->wValue;
+ u16 w_length = ctrl->wLength;
+
+ spin_lock (&dev->lock);
+ dev->setup_abort = 0;
+ if (dev->state == STATE_UNCONNECTED) {
+ struct usb_ep *ep;
+ struct ep_data *data;
+
+ dev->state = STATE_CONNECTED;
+ dev->dev->bMaxPacketSize0 = gadget->ep0->maxpacket;
+
+#ifdef HIGHSPEED
+ if (gadget->speed == USB_SPEED_HIGH && dev->hs_config == 0) {
+ ERROR (dev, "no high speed config??\n");
+ return -EINVAL;
+ }
+#endif /* HIGHSPEED */
+
+ INFO (dev, "connected\n");
+ event = next_event (dev, GADGETFS_CONNECT);
+ event->u.speed = gadget->speed;
+ ep0_readable (dev);
+
+ list_for_each_entry (ep, &gadget->ep_list, ep_list) {
+ data = ep->driver_data;
+ /* ... down_trylock (&data->lock) ... */
+ if (data->state != STATE_EP_DEFER_ENABLE)
+ continue;
+#ifdef HIGHSPEED
+ if (gadget->speed == USB_SPEED_HIGH)
+ value = usb_ep_enable (ep, &data->hs_desc);
+ else
+#endif /* HIGHSPEED */
+ value = usb_ep_enable (ep, &data->desc);
+ if (value) {
+ ERROR (dev, "deferred %s enable --> %d\n",
+ data->name, value);
+ continue;
+ }
+ data->state = STATE_EP_ENABLED;
+ wake_up (&data->wait);
+ DBG (dev, "woke up %s waiters\n", data->name);
+ }
+
+ /* host may have given up waiting for response. we can miss control
+ * requests handled lower down (device/endpoint status and features);
+ * then ep0_{read,write} will report the wrong status. controller
+ * driver will have aborted pending i/o.
+ */
+ } else if (dev->state == STATE_SETUP)
+ dev->setup_abort = 1;
+
+ req->buf = dev->rbuf;
+ req->dma = DMA_ADDR_INVALID;
+ req->context = NULL;
+ value = -EOPNOTSUPP;
+ switch (ctrl->bRequest) {
+
+ case USB_REQ_GET_DESCRIPTOR:
+ if (ctrl->bRequestType != USB_DIR_IN)
+ goto unrecognized;
+ switch (w_value >> 8) {
+
+ case USB_DT_DEVICE:
+ value = min (w_length, (u16) sizeof *dev->dev);
+ req->buf = dev->dev;
+ break;
+#ifdef HIGHSPEED
+ case USB_DT_DEVICE_QUALIFIER:
+ if (!dev->hs_config)
+ break;
+ value = min (w_length, (u16)
+ sizeof (struct usb_qualifier_descriptor));
+ make_qualifier (dev);
+ break;
+ case USB_DT_OTHER_SPEED_CONFIG:
+ // FALLTHROUGH
+#endif
+ case USB_DT_CONFIG:
+ value = config_buf (dev,
+ w_value >> 8,
+ w_value & 0xff);
+ if (value >= 0)
+ value = min (w_length, (u16) value);
+ break;
+ case USB_DT_STRING:
+ goto unrecognized;
+
+ default: // all others are errors
+ break;
+ }
+ break;
+
+ /* currently one config, two speeds */
+ case USB_REQ_SET_CONFIGURATION:
+ if (ctrl->bRequestType != 0)
+ break;
+ if (0 == (u8) w_value) {
+ value = 0;
+ dev->current_config = 0;
+ usb_gadget_vbus_draw(gadget, 8 /* mA */ );
+ // user mode expected to disable endpoints
+ } else {
+ u8 config, power;
+#ifdef HIGHSPEED
+ if (gadget->speed == USB_SPEED_HIGH) {
+ config = dev->hs_config->bConfigurationValue;
+ power = dev->hs_config->bMaxPower;
+ } else
+#endif
+ {
+ config = dev->config->bConfigurationValue;
+ power = dev->config->bMaxPower;
+ }
+
+ if (config == (u8) w_value) {
+ value = 0;
+ dev->current_config = config;
+ usb_gadget_vbus_draw(gadget, 2 * power);
+ }
+ }
+
+ /* report SET_CONFIGURATION like any other control request,
+ * except that usermode may not stall this. the next
+ * request mustn't be allowed start until this finishes:
+ * endpoints and threads set up, etc.
+ *
+ * NOTE: older PXA hardware (before PXA 255: without UDCCFR)
+ * has bad/racey automagic that prevents synchronizing here.
+ * even kernel mode drivers often miss them.
+ */
+ if (value == 0) {
+ INFO (dev, "configuration #%d\n", dev->current_config);
+ if (dev->usermode_setup) {
+ dev->setup_can_stall = 0;
+ goto delegate;
+ }
+ }
+ break;
+
+#ifndef CONFIG_USB_GADGETFS_PXA2XX
+ /* PXA automagically handles this request too */
+ case USB_REQ_GET_CONFIGURATION:
+ if (ctrl->bRequestType != 0x80)
+ break;
+ *(u8 *)req->buf = dev->current_config;
+ value = min (w_length, (u16) 1);
+ break;
+#endif
+
+ default:
+unrecognized:
+ VDEBUG (dev, "%s req%02x.%02x v%04x i%04x l%d\n",
+ dev->usermode_setup ? "delegate" : "fail",
+ ctrl->bRequestType, ctrl->bRequest,
+ w_value, le16_to_cpu(ctrl->wIndex), w_length);
+
+ /* if there's an ep0 reader, don't stall */
+ if (dev->usermode_setup) {
+ dev->setup_can_stall = 1;
+delegate:
+ dev->setup_in = (ctrl->bRequestType & USB_DIR_IN)
+ ? 1 : 0;
+ dev->setup_out_ready = 0;
+ dev->setup_out_error = 0;
+ value = 0;
+
+ /* read DATA stage for OUT right away */
+ if (unlikely (!dev->setup_in && w_length)) {
+ value = setup_req (gadget->ep0, dev->req,
+ w_length);
+ if (value < 0)
+ break;
+ value = usb_ep_queue (gadget->ep0, dev->req,
+ GFP_ATOMIC);
+ if (value < 0) {
+ clean_req (gadget->ep0, dev->req);
+ break;
+ }
+
+ /* we can't currently stall these */
+ dev->setup_can_stall = 0;
+ }
+
+ /* state changes when reader collects event */
+ event = next_event (dev, GADGETFS_SETUP);
+ event->u.setup = *ctrl;
+ ep0_readable (dev);
+ spin_unlock (&dev->lock);
+ return 0;
+ }
+ }
+
+ /* proceed with data transfer and status phases? */
+ if (value >= 0 && dev->state != STATE_SETUP) {
+ req->length = value;
+ req->zero = value < w_length;
+ value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC);
+ if (value < 0) {
+ DBG (dev, "ep_queue --> %d\n", value);
+ req->status = 0;
+ }
+ }
+
+ /* device stalls when value < 0 */
+ spin_unlock (&dev->lock);
+ return value;
+}
+
+static void destroy_ep_files (struct dev_data *dev)
+{
+ struct list_head *entry, *tmp;
+
+ DBG (dev, "%s %d\n", __FUNCTION__, dev->state);
+
+ /* dev->state must prevent interference */
+restart:
+ spin_lock_irq (&dev->lock);
+ list_for_each_safe (entry, tmp, &dev->epfiles) {
+ struct ep_data *ep;
+ struct inode *parent;
+ struct dentry *dentry;
+
+ /* break link to FS */
+ ep = list_entry (entry, struct ep_data, epfiles);
+ list_del_init (&ep->epfiles);
+ dentry = ep->dentry;
+ ep->dentry = NULL;
+ parent = dentry->d_parent->d_inode;
+
+ /* break link to controller */
+ if (ep->state == STATE_EP_ENABLED)
+ (void) usb_ep_disable (ep->ep);
+ ep->state = STATE_EP_UNBOUND;
+ usb_ep_free_request (ep->ep, ep->req);
+ ep->ep = NULL;
+ wake_up (&ep->wait);
+ put_ep (ep);
+
+ spin_unlock_irq (&dev->lock);
+
+ /* break link to dcache */
+ down (&parent->i_sem);
+ d_delete (dentry);
+ dput (dentry);
+ up (&parent->i_sem);
+
+ /* fds may still be open */
+ goto restart;
+ }
+ spin_unlock_irq (&dev->lock);
+}
+
+
+static struct inode *
+gadgetfs_create_file (struct super_block *sb, char const *name,
+ void *data, struct file_operations *fops,
+ struct dentry **dentry_p);
+
+static int activate_ep_files (struct dev_data *dev)
+{
+ struct usb_ep *ep;
+
+ gadget_for_each_ep (ep, dev->gadget) {
+ struct ep_data *data;
+
+ data = kmalloc (sizeof *data, GFP_KERNEL);
+ if (!data)
+ goto enomem;
+ memset (data, 0, sizeof data);
+ data->state = STATE_EP_DISABLED;
+ init_MUTEX (&data->lock);
+ init_waitqueue_head (&data->wait);
+
+ strncpy (data->name, ep->name, sizeof (data->name) - 1);
+ atomic_set (&data->count, 1);
+ data->dev = dev;
+ get_dev (dev);
+
+ data->ep = ep;
+ ep->driver_data = data;
+
+ data->req = usb_ep_alloc_request (ep, GFP_KERNEL);
+ if (!data->req)
+ goto enomem;
+
+ data->inode = gadgetfs_create_file (dev->sb, data->name,
+ data, &ep_config_operations,
+ &data->dentry);
+ if (!data->inode) {
+ kfree (data);
+ goto enomem;
+ }
+ list_add_tail (&data->epfiles, &dev->epfiles);
+ }
+ return 0;
+
+enomem:
+ DBG (dev, "%s enomem\n", __FUNCTION__);
+ destroy_ep_files (dev);
+ return -ENOMEM;
+}
+
+static void
+gadgetfs_unbind (struct usb_gadget *gadget)
+{
+ struct dev_data *dev = get_gadget_data (gadget);
+
+ DBG (dev, "%s\n", __FUNCTION__);
+
+ spin_lock_irq (&dev->lock);
+ dev->state = STATE_DEV_UNBOUND;
+ spin_unlock_irq (&dev->lock);
+
+ destroy_ep_files (dev);
+ gadget->ep0->driver_data = NULL;
+ set_gadget_data (gadget, NULL);
+
+ /* we've already been disconnected ... no i/o is active */
+ if (dev->req)
+ usb_ep_free_request (gadget->ep0, dev->req);
+ DBG (dev, "%s done\n", __FUNCTION__);
+ put_dev (dev);
+}
+
+static struct dev_data *the_device;
+
+static int
+gadgetfs_bind (struct usb_gadget *gadget)
+{
+ struct dev_data *dev = the_device;
+
+ if (!dev)
+ return -ESRCH;
+ if (0 != strcmp (CHIP, gadget->name)) {
+ printk (KERN_ERR "%s expected %s controller not %s\n",
+ shortname, CHIP, gadget->name);
+ return -ENODEV;
+ }
+
+ set_gadget_data (gadget, dev);
+ dev->gadget = gadget;
+ gadget->ep0->driver_data = dev;
+ dev->dev->bMaxPacketSize0 = gadget->ep0->maxpacket;
+
+ /* preallocate control response and buffer */
+ dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL);
+ if (!dev->req)
+ goto enomem;
+ dev->req->context = NULL;
+ dev->req->complete = epio_complete;
+
+ if (activate_ep_files (dev) < 0)
+ goto enomem;
+
+ INFO (dev, "bound to %s driver\n", gadget->name);
+ dev->state = STATE_UNCONNECTED;
+ get_dev (dev);
+ return 0;
+
+enomem:
+ gadgetfs_unbind (gadget);
+ return -ENOMEM;
+}
+
+static void
+gadgetfs_disconnect (struct usb_gadget *gadget)
+{
+ struct dev_data *dev = get_gadget_data (gadget);
+
+ if (dev->state == STATE_UNCONNECTED) {
+ DBG (dev, "already unconnected\n");
+ return;
+ }
+ dev->state = STATE_UNCONNECTED;
+
+ INFO (dev, "disconnected\n");
+ spin_lock (&dev->lock);
+ next_event (dev, GADGETFS_DISCONNECT);
+ ep0_readable (dev);
+ spin_unlock (&dev->lock);
+}
+
+static void
+gadgetfs_suspend (struct usb_gadget *gadget)
+{
+ struct dev_data *dev = get_gadget_data (gadget);
+
+ INFO (dev, "suspended from state %d\n", dev->state);
+ spin_lock (&dev->lock);
+ switch (dev->state) {
+ case STATE_SETUP: // VERY odd... host died??
+ case STATE_CONNECTED:
+ case STATE_UNCONNECTED:
+ next_event (dev, GADGETFS_SUSPEND);
+ ep0_readable (dev);
+ /* FALLTHROUGH */
+ default:
+ break;
+ }
+ spin_unlock (&dev->lock);
+}
+
+static struct usb_gadget_driver gadgetfs_driver = {
+#ifdef HIGHSPEED
+ .speed = USB_SPEED_HIGH,
+#else
+ .speed = USB_SPEED_FULL,
+#endif
+ .function = (char *) driver_desc,
+ .bind = gadgetfs_bind,
+ .unbind = gadgetfs_unbind,
+ .setup = gadgetfs_setup,
+ .disconnect = gadgetfs_disconnect,
+ .suspend = gadgetfs_suspend,
+
+ .driver = {
+ .name = (char *) shortname,
+ // .shutdown = ...
+ // .suspend = ...
+ // .resume = ...
+ },
+};
+
+/*----------------------------------------------------------------------*/
+
+static void gadgetfs_nop(struct usb_gadget *arg) { }
+
+static int gadgetfs_probe (struct usb_gadget *gadget)
+{
+ CHIP = gadget->name;
+ return -EISNAM;
+}
+
+static struct usb_gadget_driver probe_driver = {
+ .speed = USB_SPEED_HIGH,
+ .bind = gadgetfs_probe,
+ .unbind = gadgetfs_nop,
+ .setup = (void *)gadgetfs_nop,
+ .disconnect = gadgetfs_nop,
+ .driver = {
+ .name = "nop",
+ },
+};
+
+
+/* DEVICE INITIALIZATION
+ *
+ * fd = open ("/dev/gadget/$CHIP", O_RDWR)
+ * status = write (fd, descriptors, sizeof descriptors)
+ *
+ * That write establishes the device configuration, so the kernel can
+ * bind to the controller ... guaranteeing it can handle enumeration
+ * at all necessary speeds. Descriptor order is:
+ *
+ * . message tag (u32, host order) ... for now, must be zero; it
+ * would change to support features like multi-config devices
+ * . full/low speed config ... all wTotalLength bytes (with interface,
+ * class, altsetting, endpoint, and other descriptors)
+ * . high speed config ... all descriptors, for high speed operation;
+ * this one's optional except for high-speed hardware
+ * . device descriptor
+ *
+ * Endpoints are not yet enabled. Drivers may want to immediately
+ * initialize them, using the /dev/gadget/ep* files that are available
+ * as soon as the kernel sees the configuration, or they can wait
+ * until device configuration and interface altsetting changes create
+ * the need to configure (or unconfigure) them.
+ *
+ * After initialization, the device stays active for as long as that
+ * $CHIP file is open. Events may then be read from that descriptor,
+ * such configuration notifications. More complex drivers will handle
+ * some control requests in user space.
+ */
+
+static int is_valid_config (struct usb_config_descriptor *config)
+{
+ return config->bDescriptorType == USB_DT_CONFIG
+ && config->bLength == USB_DT_CONFIG_SIZE
+ && config->bConfigurationValue != 0
+ && (config->bmAttributes & USB_CONFIG_ATT_ONE) != 0
+ && (config->bmAttributes & USB_CONFIG_ATT_WAKEUP) == 0;
+ /* FIXME if gadget->is_otg, _must_ include an otg descriptor */
+ /* FIXME check lengths: walk to end */
+}
+
+static ssize_t
+dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
+{
+ struct dev_data *dev = fd->private_data;
+ ssize_t value = len, length = len;
+ unsigned total;
+ u32 tag;
+ char *kbuf;
+
+ if (dev->state != STATE_OPENED)
+ return -EEXIST;
+
+ if (len < (USB_DT_CONFIG_SIZE + USB_DT_DEVICE_SIZE + 4))
+ return -EINVAL;
+
+ /* we might need to change message format someday */
+ if (copy_from_user (&tag, buf, 4))
+ return -EFAULT;
+ if (tag != 0)
+ return -EINVAL;
+ buf += 4;
+ length -= 4;
+
+ kbuf = kmalloc (length, SLAB_KERNEL);
+ if (!kbuf)
+ return -ENOMEM;
+ if (copy_from_user (kbuf, buf, length)) {
+ kfree (kbuf);
+ return -EFAULT;
+ }
+
+ spin_lock_irq (&dev->lock);
+ value = -EINVAL;
+ if (dev->buf)
+ goto fail;
+ dev->buf = kbuf;
+
+ /* full or low speed config */
+ dev->config = (void *) kbuf;
+ total = le16_to_cpup (&dev->config->wTotalLength);
+ if (!is_valid_config (dev->config) || total >= length)
+ goto fail;
+ kbuf += total;
+ length -= total;
+
+ /* optional high speed config */
+ if (kbuf [1] == USB_DT_CONFIG) {
+ dev->hs_config = (void *) kbuf;
+ total = le16_to_cpup (&dev->hs_config->wTotalLength);
+ if (!is_valid_config (dev->hs_config) || total >= length)
+ goto fail;
+ kbuf += total;
+ length -= total;
+ }
+
+ /* could support multiple configs, using another encoding! */
+
+ /* device descriptor (tweaked for paranoia) */
+ if (length != USB_DT_DEVICE_SIZE)
+ goto fail;
+ dev->dev = (void *)kbuf;
+ if (dev->dev->bLength != USB_DT_DEVICE_SIZE
+ || dev->dev->bDescriptorType != USB_DT_DEVICE
+ || dev->dev->bNumConfigurations != 1)
+ goto fail;
+ dev->dev->bNumConfigurations = 1;
+ dev->dev->bcdUSB = __constant_cpu_to_le16 (0x0200);
+
+ /* triggers gadgetfs_bind(); then we can enumerate. */
+ spin_unlock_irq (&dev->lock);
+ value = usb_gadget_register_driver (&gadgetfs_driver);
+ if (value != 0) {
+ kfree (dev->buf);
+ dev->buf = NULL;
+ } else {
+ /* at this point "good" hardware has for the first time
+ * let the USB the host see us. alternatively, if users
+ * unplug/replug that will clear all the error state.
+ *
+ * note: everything running before here was guaranteed
+ * to choke driver model style diagnostics. from here
+ * on, they can work ... except in cleanup paths that
+ * kick in after the ep0 descriptor is closed.
+ */
+ fd->f_op = &ep0_io_operations;
+ value = len;
+ }
+ return value;
+
+fail:
+ spin_unlock_irq (&dev->lock);
+ pr_debug ("%s: %s fail %Zd, %p\n", shortname, __FUNCTION__, value, dev);
+ kfree (dev->buf);
+ dev->buf = NULL;
+ return value;
+}
+
+static int
+dev_open (struct inode *inode, struct file *fd)
+{
+ struct dev_data *dev = inode->u.generic_ip;
+ int value = -EBUSY;
+
+ if (dev->state == STATE_DEV_DISABLED) {
+ dev->ev_next = 0;
+ dev->state = STATE_OPENED;
+ fd->private_data = dev;
+ get_dev (dev);
+ value = 0;
+ }
+ return value;
+}
+
+static struct file_operations dev_init_operations = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+
+ .open = dev_open,
+ .write = dev_config,
+ .fasync = ep0_fasync,
+ .ioctl = dev_ioctl,
+ .release = dev_release,
+};
+
+/*----------------------------------------------------------------------*/
+
+/* FILESYSTEM AND SUPERBLOCK OPERATIONS
+ *
+ * Mounting the filesystem creates a controller file, used first for
+ * device configuration then later for event monitoring.
+ */
+
+
+/* FIXME PAM etc could set this security policy without mount options
+ * if epfiles inherited ownership and permissons from ep0 ...
+ */
+
+static unsigned default_uid;
+static unsigned default_gid;
+static unsigned default_perm = S_IRUSR | S_IWUSR;
+
+module_param (default_uid, uint, 0644);
+module_param (default_gid, uint, 0644);
+module_param (default_perm, uint, 0644);
+
+
+static struct inode *
+gadgetfs_make_inode (struct super_block *sb,
+ void *data, struct file_operations *fops,
+ int mode)
+{
+ struct inode *inode = new_inode (sb);
+
+ if (inode) {
+ inode->i_mode = mode;
+ inode->i_uid = default_uid;
+ inode->i_gid = default_gid;
+ inode->i_blksize = PAGE_CACHE_SIZE;
+ inode->i_blocks = 0;
+ inode->i_atime = inode->i_mtime = inode->i_ctime
+ = CURRENT_TIME;
+ inode->u.generic_ip = data;
+ inode->i_fop = fops;
+ }
+ return inode;
+}
+
+/* creates in fs root directory, so non-renamable and non-linkable.
+ * so inode and dentry are paired, until device reconfig.
+ */
+static struct inode *
+gadgetfs_create_file (struct super_block *sb, char const *name,
+ void *data, struct file_operations *fops,
+ struct dentry **dentry_p)
+{
+ struct dentry *dentry;
+ struct inode *inode;
+
+ dentry = d_alloc_name(sb->s_root, name);
+ if (!dentry)
+ return NULL;
+
+ inode = gadgetfs_make_inode (sb, data, fops,
+ S_IFREG | (default_perm & S_IRWXUGO));
+ if (!inode) {
+ dput(dentry);
+ return NULL;
+ }
+ d_add (dentry, inode);
+ *dentry_p = dentry;
+ return inode;
+}
+
+static struct super_operations gadget_fs_operations = {
+ .statfs = simple_statfs,
+ .drop_inode = generic_delete_inode,
+};
+
+static int
+gadgetfs_fill_super (struct super_block *sb, void *opts, int silent)
+{
+ struct inode *inode;
+ struct dentry *d;
+ struct dev_data *dev;
+
+ if (the_device)
+ return -ESRCH;
+
+ /* fake probe to determine $CHIP */
+ (void) usb_gadget_register_driver (&probe_driver);
+ if (!CHIP)
+ return -ENODEV;
+
+ /* superblock */
+ sb->s_blocksize = PAGE_CACHE_SIZE;
+ sb->s_blocksize_bits = PAGE_CACHE_SHIFT;
+ sb->s_magic = GADGETFS_MAGIC;
+ sb->s_op = &gadget_fs_operations;
+ sb->s_time_gran = 1;
+
+ /* root inode */
+ inode = gadgetfs_make_inode (sb,
+ NULL, &simple_dir_operations,
+ S_IFDIR | S_IRUGO | S_IXUGO);
+ if (!inode)
+ return -ENOMEM;
+ inode->i_op = &simple_dir_inode_operations;
+ if (!(d = d_alloc_root (inode))) {
+ iput (inode);
+ return -ENOMEM;
+ }
+ sb->s_root = d;
+
+ /* the ep0 file is named after the controller we expect;
+ * user mode code can use it for sanity checks, like we do.
+ */
+ dev = dev_new ();
+ if (!dev)
+ return -ENOMEM;
+
+ dev->sb = sb;
+ if (!(inode = gadgetfs_create_file (sb, CHIP,
+ dev, &dev_init_operations,
+ &dev->dentry))) {
+ put_dev(dev);
+ return -ENOMEM;
+ }
+
+ /* other endpoint files are available after hardware setup,
+ * from binding to a controller.
+ */
+ the_device = dev;
+ return 0;
+}
+
+/* "mount -t gadgetfs path /dev/gadget" ends up here */
+static struct super_block *
+gadgetfs_get_sb (struct file_system_type *t, int flags,
+ const char *path, void *opts)
+{
+ return get_sb_single (t, flags, opts, gadgetfs_fill_super);
+}
+
+static void
+gadgetfs_kill_sb (struct super_block *sb)
+{
+ kill_litter_super (sb);
+ if (the_device) {
+ put_dev (the_device);
+ the_device = NULL;
+ }
+}
+
+/*----------------------------------------------------------------------*/
+
+static struct file_system_type gadgetfs_type = {
+ .owner = THIS_MODULE,
+ .name = shortname,
+ .get_sb = gadgetfs_get_sb,
+ .kill_sb = gadgetfs_kill_sb,
+};
+
+/*----------------------------------------------------------------------*/
+
+static int __init init (void)
+{
+ int status;
+
+ status = register_filesystem (&gadgetfs_type);
+ if (status == 0)
+ pr_info ("%s: %s, version " DRIVER_VERSION "\n",
+ shortname, driver_desc);
+ return status;
+}
+module_init (init);
+
+static void __exit cleanup (void)
+{
+ pr_debug ("unregister %s\n", shortname);
+ unregister_filesystem (&gadgetfs_type);
+}
+module_exit (cleanup);
+
diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c
new file mode 100644
index 00000000000..0def9f70e88
--- /dev/null
+++ b/drivers/usb/gadget/lh7a40x_udc.c
@@ -0,0 +1,2167 @@
+/*
+ * linux/drivers/usb/gadget/lh7a40x_udc.c
+ * Sharp LH7A40x on-chip full speed USB device controllers
+ *
+ * Copyright (C) 2004 Mikko Lahteenmaki, Nordic ID
+ * Copyright (C) 2004 Bo Henriksen, Nordic ID
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include "lh7a40x_udc.h"
+
+//#define DEBUG printk
+//#define DEBUG_EP0 printk
+//#define DEBUG_SETUP printk
+
+#ifndef DEBUG_EP0
+# define DEBUG_EP0(fmt,args...)
+#endif
+#ifndef DEBUG_SETUP
+# define DEBUG_SETUP(fmt,args...)
+#endif
+#ifndef DEBUG
+# define NO_STATES
+# define DEBUG(fmt,args...)
+#endif
+
+#define DRIVER_DESC "LH7A40x USB Device Controller"
+#define DRIVER_VERSION __DATE__
+
+#ifndef _BIT /* FIXME - what happended to _BIT in 2.6.7bk18? */
+#define _BIT(x) (1<<(x))
+#endif
+
+struct lh7a40x_udc *the_controller;
+
+static const char driver_name[] = "lh7a40x_udc";
+static const char driver_desc[] = DRIVER_DESC;
+static const char ep0name[] = "ep0-control";
+
+/*
+ Local definintions.
+*/
+
+#ifndef NO_STATES
+static char *state_names[] = {
+ "WAIT_FOR_SETUP",
+ "DATA_STATE_XMIT",
+ "DATA_STATE_NEED_ZLP",
+ "WAIT_FOR_OUT_STATUS",
+ "DATA_STATE_RECV"
+};
+#endif
+
+/*
+ Local declarations.
+*/
+static int lh7a40x_ep_enable(struct usb_ep *ep,
+ const struct usb_endpoint_descriptor *);
+static int lh7a40x_ep_disable(struct usb_ep *ep);
+static struct usb_request *lh7a40x_alloc_request(struct usb_ep *ep, int);
+static void lh7a40x_free_request(struct usb_ep *ep, struct usb_request *);
+static void *lh7a40x_alloc_buffer(struct usb_ep *ep, unsigned, dma_addr_t *,
+ int);
+static void lh7a40x_free_buffer(struct usb_ep *ep, void *, dma_addr_t,
+ unsigned);
+static int lh7a40x_queue(struct usb_ep *ep, struct usb_request *, int);
+static int lh7a40x_dequeue(struct usb_ep *ep, struct usb_request *);
+static int lh7a40x_set_halt(struct usb_ep *ep, int);
+static int lh7a40x_fifo_status(struct usb_ep *ep);
+static int lh7a40x_fifo_status(struct usb_ep *ep);
+static void lh7a40x_fifo_flush(struct usb_ep *ep);
+static void lh7a40x_ep0_kick(struct lh7a40x_udc *dev, struct lh7a40x_ep *ep);
+static void lh7a40x_handle_ep0(struct lh7a40x_udc *dev, u32 intr);
+
+static void done(struct lh7a40x_ep *ep, struct lh7a40x_request *req,
+ int status);
+static void pio_irq_enable(int bEndpointAddress);
+static void pio_irq_disable(int bEndpointAddress);
+static void stop_activity(struct lh7a40x_udc *dev,
+ struct usb_gadget_driver *driver);
+static void flush(struct lh7a40x_ep *ep);
+static void udc_enable(struct lh7a40x_udc *dev);
+static void udc_set_address(struct lh7a40x_udc *dev, unsigned char address);
+
+static struct usb_ep_ops lh7a40x_ep_ops = {
+ .enable = lh7a40x_ep_enable,
+ .disable = lh7a40x_ep_disable,
+
+ .alloc_request = lh7a40x_alloc_request,
+ .free_request = lh7a40x_free_request,
+
+ .alloc_buffer = lh7a40x_alloc_buffer,
+ .free_buffer = lh7a40x_free_buffer,
+
+ .queue = lh7a40x_queue,
+ .dequeue = lh7a40x_dequeue,
+
+ .set_halt = lh7a40x_set_halt,
+ .fifo_status = lh7a40x_fifo_status,
+ .fifo_flush = lh7a40x_fifo_flush,
+};
+
+/* Inline code */
+
+static __inline__ int write_packet(struct lh7a40x_ep *ep,
+ struct lh7a40x_request *req, int max)
+{
+ u8 *buf;
+ int length, count;
+ volatile u32 *fifo = (volatile u32 *)ep->fifo;
+
+ buf = req->req.buf + req->req.actual;
+ prefetch(buf);
+
+ length = req->req.length - req->req.actual;
+ length = min(length, max);
+ req->req.actual += length;
+
+ DEBUG("Write %d (max %d), fifo %p\n", length, max, fifo);
+
+ count = length;
+ while (count--) {
+ *fifo = *buf++;
+ }
+
+ return length;
+}
+
+static __inline__ void usb_set_index(u32 ep)
+{
+ *(volatile u32 *)io_p2v(USB_INDEX) = ep;
+}
+
+static __inline__ u32 usb_read(u32 port)
+{
+ return *(volatile u32 *)io_p2v(port);
+}
+
+static __inline__ void usb_write(u32 val, u32 port)
+{
+ *(volatile u32 *)io_p2v(port) = val;
+}
+
+static __inline__ void usb_set(u32 val, u32 port)
+{
+ volatile u32 *ioport = (volatile u32 *)io_p2v(port);
+ u32 after = (*ioport) | val;
+ *ioport = after;
+}
+
+static __inline__ void usb_clear(u32 val, u32 port)
+{
+ volatile u32 *ioport = (volatile u32 *)io_p2v(port);
+ u32 after = (*ioport) & ~val;
+ *ioport = after;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#define GPIO_PORTC_DR (0x80000E08)
+#define GPIO_PORTC_DDR (0x80000E18)
+#define GPIO_PORTC_PDR (0x80000E70)
+
+/* get port C pin data register */
+#define get_portc_pdr(bit) ((usb_read(GPIO_PORTC_PDR) & _BIT(bit)) != 0)
+/* get port C data direction register */
+#define get_portc_ddr(bit) ((usb_read(GPIO_PORTC_DDR) & _BIT(bit)) != 0)
+/* set port C data register */
+#define set_portc_dr(bit, val) (val ? usb_set(_BIT(bit), GPIO_PORTC_DR) : usb_clear(_BIT(bit), GPIO_PORTC_DR))
+/* set port C data direction register */
+#define set_portc_ddr(bit, val) (val ? usb_set(_BIT(bit), GPIO_PORTC_DDR) : usb_clear(_BIT(bit), GPIO_PORTC_DDR))
+
+/*
+ * LPD7A404 GPIO's:
+ * Port C bit 1 = USB Port 1 Power Enable
+ * Port C bit 2 = USB Port 1 Data Carrier Detect
+ */
+#define is_usb_connected() get_portc_pdr(2)
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+static const char proc_node_name[] = "driver/udc";
+
+static int
+udc_proc_read(char *page, char **start, off_t off, int count,
+ int *eof, void *_dev)
+{
+ char *buf = page;
+ struct lh7a40x_udc *dev = _dev;
+ char *next = buf;
+ unsigned size = count;
+ unsigned long flags;
+ int t;
+
+ if (off != 0)
+ return 0;
+
+ local_irq_save(flags);
+
+ /* basic device status */
+ t = scnprintf(next, size,
+ DRIVER_DESC "\n"
+ "%s version: %s\n"
+ "Gadget driver: %s\n"
+ "Host: %s\n\n",
+ driver_name, DRIVER_VERSION,
+ dev->driver ? dev->driver->driver.name : "(none)",
+ is_usb_connected()? "full speed" : "disconnected");
+ size -= t;
+ next += t;
+
+ t = scnprintf(next, size,
+ "GPIO:\n"
+ " Port C bit 1: %d, dir %d\n"
+ " Port C bit 2: %d, dir %d\n\n",
+ get_portc_pdr(1), get_portc_ddr(1),
+ get_portc_pdr(2), get_portc_ddr(2)
+ );
+ size -= t;
+ next += t;
+
+ t = scnprintf(next, size,
+ "DCP pullup: %d\n\n",
+ (usb_read(USB_PM) & PM_USB_DCP) != 0);
+ size -= t;
+ next += t;
+
+ local_irq_restore(flags);
+ *eof = 1;
+ return count - size;
+}
+
+#define create_proc_files() create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev)
+#define remove_proc_files() remove_proc_entry(proc_node_name, NULL)
+
+#else /* !CONFIG_USB_GADGET_DEBUG_FILES */
+
+#define create_proc_files() do {} while (0)
+#define remove_proc_files() do {} while (0)
+
+#endif /* CONFIG_USB_GADGET_DEBUG_FILES */
+
+/*
+ * udc_disable - disable USB device controller
+ */
+static void udc_disable(struct lh7a40x_udc *dev)
+{
+ DEBUG("%s, %p\n", __FUNCTION__, dev);
+
+ udc_set_address(dev, 0);
+
+ /* Disable interrupts */
+ usb_write(0, USB_IN_INT_EN);
+ usb_write(0, USB_OUT_INT_EN);
+ usb_write(0, USB_INT_EN);
+
+ /* Disable the USB */
+ usb_write(0, USB_PM);
+
+#ifdef CONFIG_ARCH_LH7A404
+ /* Disable USB power */
+ set_portc_dr(1, 0);
+#endif
+
+ /* if hardware supports it, disconnect from usb */
+ /* make_usb_disappear(); */
+
+ dev->ep0state = WAIT_FOR_SETUP;
+ dev->gadget.speed = USB_SPEED_UNKNOWN;
+ dev->usb_address = 0;
+}
+
+/*
+ * udc_reinit - initialize software state
+ */
+static void udc_reinit(struct lh7a40x_udc *dev)
+{
+ u32 i;
+
+ DEBUG("%s, %p\n", __FUNCTION__, dev);
+
+ /* device/ep0 records init */
+ INIT_LIST_HEAD(&dev->gadget.ep_list);
+ INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
+ dev->ep0state = WAIT_FOR_SETUP;
+
+ /* basic endpoint records init */
+ for (i = 0; i < UDC_MAX_ENDPOINTS; i++) {
+ struct lh7a40x_ep *ep = &dev->ep[i];
+
+ if (i != 0)
+ list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
+
+ ep->desc = 0;
+ ep->stopped = 0;
+ INIT_LIST_HEAD(&ep->queue);
+ ep->pio_irqs = 0;
+ }
+
+ /* the rest was statically initialized, and is read-only */
+}
+
+#define BYTES2MAXP(x) (x / 8)
+#define MAXP2BYTES(x) (x * 8)
+
+/* until it's enabled, this UDC should be completely invisible
+ * to any USB host.
+ */
+static void udc_enable(struct lh7a40x_udc *dev)
+{
+ int ep;
+
+ DEBUG("%s, %p\n", __FUNCTION__, dev);
+
+ dev->gadget.speed = USB_SPEED_UNKNOWN;
+
+#ifdef CONFIG_ARCH_LH7A404
+ /* Set Port C bit 1 & 2 as output */
+ set_portc_ddr(1, 1);
+ set_portc_ddr(2, 1);
+
+ /* Enable USB power */
+ set_portc_dr(1, 0);
+#endif
+
+ /*
+ * C.f Chapter 18.1.3.1 Initializing the USB
+ */
+
+ /* Disable the USB */
+ usb_clear(PM_USB_ENABLE, USB_PM);
+
+ /* Reset APB & I/O sides of the USB */
+ usb_set(USB_RESET_APB | USB_RESET_IO, USB_RESET);
+ mdelay(5);
+ usb_clear(USB_RESET_APB | USB_RESET_IO, USB_RESET);
+
+ /* Set MAXP values for each */
+ for (ep = 0; ep < UDC_MAX_ENDPOINTS; ep++) {
+ struct lh7a40x_ep *ep_reg = &dev->ep[ep];
+ u32 csr;
+
+ usb_set_index(ep);
+
+ switch (ep_reg->ep_type) {
+ case ep_bulk_in:
+ case ep_interrupt:
+ usb_clear(USB_IN_CSR2_USB_DMA_EN | USB_IN_CSR2_AUTO_SET,
+ ep_reg->csr2);
+ /* Fall through */
+ case ep_control:
+ usb_write(BYTES2MAXP(ep_maxpacket(ep_reg)),
+ USB_IN_MAXP);
+ break;
+ case ep_bulk_out:
+ usb_clear(USB_OUT_CSR2_USB_DMA_EN |
+ USB_OUT_CSR2_AUTO_CLR, ep_reg->csr2);
+ usb_write(BYTES2MAXP(ep_maxpacket(ep_reg)),
+ USB_OUT_MAXP);
+ break;
+ }
+
+ /* Read & Write CSR1, just in case */
+ csr = usb_read(ep_reg->csr1);
+ usb_write(csr, ep_reg->csr1);
+
+ flush(ep_reg);
+ }
+
+ /* Disable interrupts */
+ usb_write(0, USB_IN_INT_EN);
+ usb_write(0, USB_OUT_INT_EN);
+ usb_write(0, USB_INT_EN);
+
+ /* Enable interrupts */
+ usb_set(USB_IN_INT_EP0, USB_IN_INT_EN);
+ usb_set(USB_INT_RESET_INT | USB_INT_RESUME_INT, USB_INT_EN);
+ /* Dont enable rest of the interrupts */
+ /* usb_set(USB_IN_INT_EP3 | USB_IN_INT_EP1 | USB_IN_INT_EP0, USB_IN_INT_EN);
+ usb_set(USB_OUT_INT_EP2, USB_OUT_INT_EN); */
+
+ /* Enable SUSPEND */
+ usb_set(PM_ENABLE_SUSPEND, USB_PM);
+
+ /* Enable the USB */
+ usb_set(PM_USB_ENABLE, USB_PM);
+
+#ifdef CONFIG_ARCH_LH7A404
+ /* NOTE: DOES NOT WORK! */
+ /* Let host detect UDC:
+ * Software must write a 0 to the PMR:DCP_CTRL bit to turn this
+ * transistor on and pull the USBDP pin HIGH.
+ */
+ /* usb_clear(PM_USB_DCP, USB_PM);
+ usb_set(PM_USB_DCP, USB_PM); */
+#endif
+}
+
+/*
+ Register entry point for the peripheral controller driver.
+*/
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+ struct lh7a40x_udc *dev = the_controller;
+ int retval;
+
+ DEBUG("%s: %s\n", __FUNCTION__, driver->driver.name);
+
+ if (!driver
+ || driver->speed != USB_SPEED_FULL
+ || !driver->bind
+ || !driver->unbind || !driver->disconnect || !driver->setup)
+ return -EINVAL;
+ if (!dev)
+ return -ENODEV;
+ if (dev->driver)
+ return -EBUSY;
+
+ /* first hook up the driver ... */
+ dev->driver = driver;
+ dev->gadget.dev.driver = &driver->driver;
+
+ device_add(&dev->gadget.dev);
+ retval = driver->bind(&dev->gadget);
+ if (retval) {
+ printk("%s: bind to driver %s --> error %d\n", dev->gadget.name,
+ driver->driver.name, retval);
+ device_del(&dev->gadget.dev);
+
+ dev->driver = 0;
+ dev->gadget.dev.driver = 0;
+ return retval;
+ }
+
+ /* ... then enable host detection and ep0; and we're ready
+ * for set_configuration as well as eventual disconnect.
+ * NOTE: this shouldn't power up until later.
+ */
+ printk("%s: registered gadget driver '%s'\n", dev->gadget.name,
+ driver->driver.name);
+
+ udc_enable(dev);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(usb_gadget_register_driver);
+
+/*
+ Unregister entry point for the peripheral controller driver.
+*/
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+ struct lh7a40x_udc *dev = the_controller;
+ unsigned long flags;
+
+ if (!dev)
+ return -ENODEV;
+ if (!driver || driver != dev->driver)
+ return -EINVAL;
+
+ spin_lock_irqsave(&dev->lock, flags);
+ dev->driver = 0;
+ stop_activity(dev, driver);
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ driver->unbind(&dev->gadget);
+ device_del(&dev->gadget.dev);
+
+ udc_disable(dev);
+
+ DEBUG("unregistered gadget driver '%s'\n", driver->driver.name);
+ return 0;
+}
+
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+/*-------------------------------------------------------------------------*/
+
+/** Write request to FIFO (max write == maxp size)
+ * Return: 0 = still running, 1 = completed, negative = errno
+ * NOTE: INDEX register must be set for EP
+ */
+static int write_fifo(struct lh7a40x_ep *ep, struct lh7a40x_request *req)
+{
+ u32 max;
+ u32 csr;
+
+ max = le16_to_cpu(ep->desc->wMaxPacketSize);
+
+ csr = usb_read(ep->csr1);
+ DEBUG("CSR: %x %d\n", csr, csr & USB_IN_CSR1_FIFO_NOT_EMPTY);
+
+ if (!(csr & USB_IN_CSR1_FIFO_NOT_EMPTY)) {
+ unsigned count;
+ int is_last, is_short;
+
+ count = write_packet(ep, req, max);
+ usb_set(USB_IN_CSR1_IN_PKT_RDY, ep->csr1);
+
+ /* last packet is usually short (or a zlp) */
+ if (unlikely(count != max))
+ is_last = is_short = 1;
+ else {
+ if (likely(req->req.length != req->req.actual)
+ || req->req.zero)
+ is_last = 0;
+ else
+ is_last = 1;
+ /* interrupt/iso maxpacket may not fill the fifo */
+ is_short = unlikely(max < ep_maxpacket(ep));
+ }
+
+ DEBUG("%s: wrote %s %d bytes%s%s %d left %p\n", __FUNCTION__,
+ ep->ep.name, count,
+ is_last ? "/L" : "", is_short ? "/S" : "",
+ req->req.length - req->req.actual, req);
+
+ /* requests complete when all IN data is in the FIFO */
+ if (is_last) {
+ done(ep, req, 0);
+ if (list_empty(&ep->queue)) {
+ pio_irq_disable(ep_index(ep));
+ }
+ return 1;
+ }
+ } else {
+ DEBUG("Hmm.. %d ep FIFO is not empty!\n", ep_index(ep));
+ }
+
+ return 0;
+}
+
+/** Read to request from FIFO (max read == bytes in fifo)
+ * Return: 0 = still running, 1 = completed, negative = errno
+ * NOTE: INDEX register must be set for EP
+ */
+static int read_fifo(struct lh7a40x_ep *ep, struct lh7a40x_request *req)
+{
+ u32 csr;
+ u8 *buf;
+ unsigned bufferspace, count, is_short;
+ volatile u32 *fifo = (volatile u32 *)ep->fifo;
+
+ /* make sure there's a packet in the FIFO. */
+ csr = usb_read(ep->csr1);
+ if (!(csr & USB_OUT_CSR1_OUT_PKT_RDY)) {
+ DEBUG("%s: Packet NOT ready!\n", __FUNCTION__);
+ return -EINVAL;
+ }
+
+ buf = req->req.buf + req->req.actual;
+ prefetchw(buf);
+ bufferspace = req->req.length - req->req.actual;
+
+ /* read all bytes from this packet */
+ count = usb_read(USB_OUT_FIFO_WC1);
+ req->req.actual += min(count, bufferspace);
+
+ is_short = (count < ep->ep.maxpacket);
+ DEBUG("read %s %02x, %d bytes%s req %p %d/%d\n",
+ ep->ep.name, csr, count,
+ is_short ? "/S" : "", req, req->req.actual, req->req.length);
+
+ while (likely(count-- != 0)) {
+ u8 byte = (u8) (*fifo & 0xff);
+
+ if (unlikely(bufferspace == 0)) {
+ /* this happens when the driver's buffer
+ * is smaller than what the host sent.
+ * discard the extra data.
+ */
+ if (req->req.status != -EOVERFLOW)
+ printk("%s overflow %d\n", ep->ep.name, count);
+ req->req.status = -EOVERFLOW;
+ } else {
+ *buf++ = byte;
+ bufferspace--;
+ }
+ }
+
+ usb_clear(USB_OUT_CSR1_OUT_PKT_RDY, ep->csr1);
+
+ /* completion */
+ if (is_short || req->req.actual == req->req.length) {
+ done(ep, req, 0);
+ usb_set(USB_OUT_CSR1_FIFO_FLUSH, ep->csr1);
+
+ if (list_empty(&ep->queue))
+ pio_irq_disable(ep_index(ep));
+ return 1;
+ }
+
+ /* finished that packet. the next one may be waiting... */
+ return 0;
+}
+
+/*
+ * done - retire a request; caller blocked irqs
+ * INDEX register is preserved to keep same
+ */
+static void done(struct lh7a40x_ep *ep, struct lh7a40x_request *req, int status)
+{
+ unsigned int stopped = ep->stopped;
+ u32 index;
+
+ DEBUG("%s, %p\n", __FUNCTION__, ep);
+ list_del_init(&req->queue);
+
+ if (likely(req->req.status == -EINPROGRESS))
+ req->req.status = status;
+ else
+ status = req->req.status;
+
+ if (status && status != -ESHUTDOWN)
+ DEBUG("complete %s req %p stat %d len %u/%u\n",
+ ep->ep.name, &req->req, status,
+ req->req.actual, req->req.length);
+
+ /* don't modify queue heads during completion callback */
+ ep->stopped = 1;
+ /* Read current index (completion may modify it) */
+ index = usb_read(USB_INDEX);
+
+ spin_unlock(&ep->dev->lock);
+ req->req.complete(&ep->ep, &req->req);
+ spin_lock(&ep->dev->lock);
+
+ /* Restore index */
+ usb_set_index(index);
+ ep->stopped = stopped;
+}
+
+/** Enable EP interrupt */
+static void pio_irq_enable(int ep)
+{
+ DEBUG("%s: %d\n", __FUNCTION__, ep);
+
+ switch (ep) {
+ case 1:
+ usb_set(USB_IN_INT_EP1, USB_IN_INT_EN);
+ break;
+ case 2:
+ usb_set(USB_OUT_INT_EP2, USB_OUT_INT_EN);
+ break;
+ case 3:
+ usb_set(USB_IN_INT_EP3, USB_IN_INT_EN);
+ break;
+ default:
+ DEBUG("Unknown endpoint: %d\n", ep);
+ break;
+ }
+}
+
+/** Disable EP interrupt */
+static void pio_irq_disable(int ep)
+{
+ DEBUG("%s: %d\n", __FUNCTION__, ep);
+
+ switch (ep) {
+ case 1:
+ usb_clear(USB_IN_INT_EP1, USB_IN_INT_EN);
+ break;
+ case 2:
+ usb_clear(USB_OUT_INT_EP2, USB_OUT_INT_EN);
+ break;
+ case 3:
+ usb_clear(USB_IN_INT_EP3, USB_IN_INT_EN);
+ break;
+ default:
+ DEBUG("Unknown endpoint: %d\n", ep);
+ break;
+ }
+}
+
+/*
+ * nuke - dequeue ALL requests
+ */
+void nuke(struct lh7a40x_ep *ep, int status)
+{
+ struct lh7a40x_request *req;
+
+ DEBUG("%s, %p\n", __FUNCTION__, ep);
+
+ /* Flush FIFO */
+ flush(ep);
+
+ /* called with irqs blocked */
+ while (!list_empty(&ep->queue)) {
+ req = list_entry(ep->queue.next, struct lh7a40x_request, queue);
+ done(ep, req, status);
+ }
+
+ /* Disable IRQ if EP is enabled (has decriptor) */
+ if (ep->desc)
+ pio_irq_disable(ep_index(ep));
+}
+
+/*
+void nuke_all(struct lh7a40x_udc *dev)
+{
+ int n;
+ for(n=0; n<UDC_MAX_ENDPOINTS; n++) {
+ struct lh7a40x_ep *ep = &dev->ep[n];
+ usb_set_index(n);
+ nuke(ep, 0);
+ }
+}*/
+
+/*
+static void flush_all(struct lh7a40x_udc *dev)
+{
+ int n;
+ for (n = 0; n < UDC_MAX_ENDPOINTS; n++)
+ {
+ struct lh7a40x_ep *ep = &dev->ep[n];
+ flush(ep);
+ }
+}
+*/
+
+/** Flush EP
+ * NOTE: INDEX register must be set before this call
+ */
+static void flush(struct lh7a40x_ep *ep)
+{
+ DEBUG("%s, %p\n", __FUNCTION__, ep);
+
+ switch (ep->ep_type) {
+ case ep_control:
+ /* check, by implication c.f. 15.1.2.11 */
+ break;
+
+ case ep_bulk_in:
+ case ep_interrupt:
+ /* if(csr & USB_IN_CSR1_IN_PKT_RDY) */
+ usb_set(USB_IN_CSR1_FIFO_FLUSH, ep->csr1);
+ break;
+
+ case ep_bulk_out:
+ /* if(csr & USB_OUT_CSR1_OUT_PKT_RDY) */
+ usb_set(USB_OUT_CSR1_FIFO_FLUSH, ep->csr1);
+ break;
+ }
+}
+
+/**
+ * lh7a40x_in_epn - handle IN interrupt
+ */
+static void lh7a40x_in_epn(struct lh7a40x_udc *dev, u32 ep_idx, u32 intr)
+{
+ u32 csr;
+ struct lh7a40x_ep *ep = &dev->ep[ep_idx];
+ struct lh7a40x_request *req;
+
+ usb_set_index(ep_idx);
+
+ csr = usb_read(ep->csr1);
+ DEBUG("%s: %d, csr %x\n", __FUNCTION__, ep_idx, csr);
+
+ if (csr & USB_IN_CSR1_SENT_STALL) {
+ DEBUG("USB_IN_CSR1_SENT_STALL\n");
+ usb_set(USB_IN_CSR1_SENT_STALL /*|USB_IN_CSR1_SEND_STALL */ ,
+ ep->csr1);
+ return;
+ }
+
+ if (!ep->desc) {
+ DEBUG("%s: NO EP DESC\n", __FUNCTION__);
+ return;
+ }
+
+ if (list_empty(&ep->queue))
+ req = 0;
+ else
+ req = list_entry(ep->queue.next, struct lh7a40x_request, queue);
+
+ DEBUG("req: %p\n", req);
+
+ if (!req)
+ return;
+
+ write_fifo(ep, req);
+}
+
+/* ********************************************************************************************* */
+/* Bulk OUT (recv)
+ */
+
+static void lh7a40x_out_epn(struct lh7a40x_udc *dev, u32 ep_idx, u32 intr)
+{
+ struct lh7a40x_ep *ep = &dev->ep[ep_idx];
+ struct lh7a40x_request *req;
+
+ DEBUG("%s: %d\n", __FUNCTION__, ep_idx);
+
+ usb_set_index(ep_idx);
+
+ if (ep->desc) {
+ u32 csr;
+ csr = usb_read(ep->csr1);
+
+ while ((csr =
+ usb_read(ep->
+ csr1)) & (USB_OUT_CSR1_OUT_PKT_RDY |
+ USB_OUT_CSR1_SENT_STALL)) {
+ DEBUG("%s: %x\n", __FUNCTION__, csr);
+
+ if (csr & USB_OUT_CSR1_SENT_STALL) {
+ DEBUG("%s: stall sent, flush fifo\n",
+ __FUNCTION__);
+ /* usb_set(USB_OUT_CSR1_FIFO_FLUSH, ep->csr1); */
+ flush(ep);
+ } else if (csr & USB_OUT_CSR1_OUT_PKT_RDY) {
+ if (list_empty(&ep->queue))
+ req = 0;
+ else
+ req =
+ list_entry(ep->queue.next,
+ struct lh7a40x_request,
+ queue);
+
+ if (!req) {
+ printk("%s: NULL REQ %d\n",
+ __FUNCTION__, ep_idx);
+ flush(ep);
+ break;
+ } else {
+ read_fifo(ep, req);
+ }
+ }
+
+ }
+
+ } else {
+ /* Throw packet away.. */
+ printk("%s: No descriptor?!?\n", __FUNCTION__);
+ flush(ep);
+ }
+}
+
+static void stop_activity(struct lh7a40x_udc *dev,
+ struct usb_gadget_driver *driver)
+{
+ int i;
+
+ /* don't disconnect drivers more than once */
+ if (dev->gadget.speed == USB_SPEED_UNKNOWN)
+ driver = 0;
+ dev->gadget.speed = USB_SPEED_UNKNOWN;
+
+ /* prevent new request submissions, kill any outstanding requests */
+ for (i = 0; i < UDC_MAX_ENDPOINTS; i++) {
+ struct lh7a40x_ep *ep = &dev->ep[i];
+ ep->stopped = 1;
+
+ usb_set_index(i);
+ nuke(ep, -ESHUTDOWN);
+ }
+
+ /* report disconnect; the driver is already quiesced */
+ if (driver) {
+ spin_unlock(&dev->lock);
+ driver->disconnect(&dev->gadget);
+ spin_lock(&dev->lock);
+ }
+
+ /* re-init driver-visible data structures */
+ udc_reinit(dev);
+}
+
+/** Handle USB RESET interrupt
+ */
+static void lh7a40x_reset_intr(struct lh7a40x_udc *dev)
+{
+#if 0 /* def CONFIG_ARCH_LH7A404 */
+ /* Does not work always... */
+
+ DEBUG("%s: %d\n", __FUNCTION__, dev->usb_address);
+
+ if (!dev->usb_address) {
+ /*usb_set(USB_RESET_IO, USB_RESET);
+ mdelay(5);
+ usb_clear(USB_RESET_IO, USB_RESET); */
+ return;
+ }
+ /* Put the USB controller into reset. */
+ usb_set(USB_RESET_IO, USB_RESET);
+
+ /* Set Device ID to 0 */
+ udc_set_address(dev, 0);
+
+ /* Let PLL2 settle down */
+ mdelay(5);
+
+ /* Release the USB controller from reset */
+ usb_clear(USB_RESET_IO, USB_RESET);
+
+ /* Re-enable UDC */
+ udc_enable(dev);
+
+#endif
+ dev->gadget.speed = USB_SPEED_FULL;
+}
+
+/*
+ * lh7a40x usb client interrupt handler.
+ */
+static irqreturn_t lh7a40x_udc_irq(int irq, void *_dev, struct pt_regs *r)
+{
+ struct lh7a40x_udc *dev = _dev;
+
+ DEBUG("\n\n");
+
+ spin_lock(&dev->lock);
+
+ for (;;) {
+ u32 intr_in = usb_read(USB_IN_INT);
+ u32 intr_out = usb_read(USB_OUT_INT);
+ u32 intr_int = usb_read(USB_INT);
+
+ /* Test also against enable bits.. (lh7a40x errata).. Sigh.. */
+ u32 in_en = usb_read(USB_IN_INT_EN);
+ u32 out_en = usb_read(USB_OUT_INT_EN);
+
+ if (!intr_out && !intr_in && !intr_int)
+ break;
+
+ DEBUG("%s (on state %s)\n", __FUNCTION__,
+ state_names[dev->ep0state]);
+ DEBUG("intr_out = %x\n", intr_out);
+ DEBUG("intr_in = %x\n", intr_in);
+ DEBUG("intr_int = %x\n", intr_int);
+
+ if (intr_in) {
+ usb_write(intr_in, USB_IN_INT);
+
+ if ((intr_in & USB_IN_INT_EP1)
+ && (in_en & USB_IN_INT_EP1)) {
+ DEBUG("USB_IN_INT_EP1\n");
+ lh7a40x_in_epn(dev, 1, intr_in);
+ }
+ if ((intr_in & USB_IN_INT_EP3)
+ && (in_en & USB_IN_INT_EP3)) {
+ DEBUG("USB_IN_INT_EP3\n");
+ lh7a40x_in_epn(dev, 3, intr_in);
+ }
+ if (intr_in & USB_IN_INT_EP0) {
+ DEBUG("USB_IN_INT_EP0 (control)\n");
+ lh7a40x_handle_ep0(dev, intr_in);
+ }
+ }
+
+ if (intr_out) {
+ usb_write(intr_out, USB_OUT_INT);
+
+ if ((intr_out & USB_OUT_INT_EP2)
+ && (out_en & USB_OUT_INT_EP2)) {
+ DEBUG("USB_OUT_INT_EP2\n");
+ lh7a40x_out_epn(dev, 2, intr_out);
+ }
+ }
+
+ if (intr_int) {
+ usb_write(intr_int, USB_INT);
+
+ if (intr_int & USB_INT_RESET_INT) {
+ lh7a40x_reset_intr(dev);
+ }
+
+ if (intr_int & USB_INT_RESUME_INT) {
+ DEBUG("USB resume\n");
+
+ if (dev->gadget.speed != USB_SPEED_UNKNOWN
+ && dev->driver
+ && dev->driver->resume
+ && is_usb_connected()) {
+ dev->driver->resume(&dev->gadget);
+ }
+ }
+
+ if (intr_int & USB_INT_SUSPEND_INT) {
+ DEBUG("USB suspend%s\n",
+ is_usb_connected()? "" : "+disconnect");
+ if (!is_usb_connected()) {
+ stop_activity(dev, dev->driver);
+ } else if (dev->gadget.speed !=
+ USB_SPEED_UNKNOWN && dev->driver
+ && dev->driver->suspend) {
+ dev->driver->suspend(&dev->gadget);
+ }
+ }
+
+ }
+ }
+
+ spin_unlock(&dev->lock);
+
+ return IRQ_HANDLED;
+}
+
+static int lh7a40x_ep_enable(struct usb_ep *_ep,
+ const struct usb_endpoint_descriptor *desc)
+{
+ struct lh7a40x_ep *ep;
+ struct lh7a40x_udc *dev;
+ unsigned long flags;
+
+ DEBUG("%s, %p\n", __FUNCTION__, _ep);
+
+ ep = container_of(_ep, struct lh7a40x_ep, ep);
+ if (!_ep || !desc || ep->desc || _ep->name == ep0name
+ || desc->bDescriptorType != USB_DT_ENDPOINT
+ || ep->bEndpointAddress != desc->bEndpointAddress
+ || ep_maxpacket(ep) < le16_to_cpu(desc->wMaxPacketSize)) {
+ DEBUG("%s, bad ep or descriptor\n", __FUNCTION__);
+ return -EINVAL;
+ }
+
+ /* xfer types must match, except that interrupt ~= bulk */
+ if (ep->bmAttributes != desc->bmAttributes
+ && ep->bmAttributes != USB_ENDPOINT_XFER_BULK
+ && desc->bmAttributes != USB_ENDPOINT_XFER_INT) {
+ DEBUG("%s, %s type mismatch\n", __FUNCTION__, _ep->name);
+ return -EINVAL;
+ }
+
+ /* hardware _could_ do smaller, but driver doesn't */
+ if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
+ && le16_to_cpu(desc->wMaxPacketSize) != ep_maxpacket(ep))
+ || !desc->wMaxPacketSize) {
+ DEBUG("%s, bad %s maxpacket\n", __FUNCTION__, _ep->name);
+ return -ERANGE;
+ }
+
+ dev = ep->dev;
+ if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
+ DEBUG("%s, bogus device state\n", __FUNCTION__);
+ return -ESHUTDOWN;
+ }
+
+ spin_lock_irqsave(&ep->dev->lock, flags);
+
+ ep->stopped = 0;
+ ep->desc = desc;
+ ep->pio_irqs = 0;
+ ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+
+ /* Reset halt state (does flush) */
+ lh7a40x_set_halt(_ep, 0);
+
+ spin_unlock_irqrestore(&ep->dev->lock, flags);
+
+ DEBUG("%s: enabled %s\n", __FUNCTION__, _ep->name);
+ return 0;
+}
+
+/** Disable EP
+ * NOTE: Sets INDEX register
+ */
+static int lh7a40x_ep_disable(struct usb_ep *_ep)
+{
+ struct lh7a40x_ep *ep;
+ unsigned long flags;
+
+ DEBUG("%s, %p\n", __FUNCTION__, _ep);
+
+ ep = container_of(_ep, struct lh7a40x_ep, ep);
+ if (!_ep || !ep->desc) {
+ DEBUG("%s, %s not enabled\n", __FUNCTION__,
+ _ep ? ep->ep.name : NULL);
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&ep->dev->lock, flags);
+
+ usb_set_index(ep_index(ep));
+
+ /* Nuke all pending requests (does flush) */
+ nuke(ep, -ESHUTDOWN);
+
+ /* Disable ep IRQ */
+ pio_irq_disable(ep_index(ep));
+
+ ep->desc = 0;
+ ep->stopped = 1;
+
+ spin_unlock_irqrestore(&ep->dev->lock, flags);
+
+ DEBUG("%s: disabled %s\n", __FUNCTION__, _ep->name);
+ return 0;
+}
+
+static struct usb_request *lh7a40x_alloc_request(struct usb_ep *ep,
+ int gfp_flags)
+{
+ struct lh7a40x_request *req;
+
+ DEBUG("%s, %p\n", __FUNCTION__, ep);
+
+ req = kmalloc(sizeof *req, gfp_flags);
+ if (!req)
+ return 0;
+
+ memset(req, 0, sizeof *req);
+ INIT_LIST_HEAD(&req->queue);
+
+ return &req->req;
+}
+
+static void lh7a40x_free_request(struct usb_ep *ep, struct usb_request *_req)
+{
+ struct lh7a40x_request *req;
+
+ DEBUG("%s, %p\n", __FUNCTION__, ep);
+
+ req = container_of(_req, struct lh7a40x_request, req);
+ WARN_ON(!list_empty(&req->queue));
+ kfree(req);
+}
+
+static void *lh7a40x_alloc_buffer(struct usb_ep *ep, unsigned bytes,
+ dma_addr_t * dma, int gfp_flags)
+{
+ char *retval;
+
+ DEBUG("%s (%p, %d, %d)\n", __FUNCTION__, ep, bytes, gfp_flags);
+
+ retval = kmalloc(bytes, gfp_flags & ~(__GFP_DMA | __GFP_HIGHMEM));
+ if (retval)
+ *dma = virt_to_bus(retval);
+ return retval;
+}
+
+static void lh7a40x_free_buffer(struct usb_ep *ep, void *buf, dma_addr_t dma,
+ unsigned bytes)
+{
+ DEBUG("%s, %p\n", __FUNCTION__, ep);
+ kfree(buf);
+}
+
+/** Queue one request
+ * Kickstart transfer if needed
+ * NOTE: Sets INDEX register
+ */
+static int lh7a40x_queue(struct usb_ep *_ep, struct usb_request *_req,
+ int gfp_flags)
+{
+ struct lh7a40x_request *req;
+ struct lh7a40x_ep *ep;
+ struct lh7a40x_udc *dev;
+ unsigned long flags;
+
+ DEBUG("\n\n\n%s, %p\n", __FUNCTION__, _ep);
+
+ req = container_of(_req, struct lh7a40x_request, req);
+ if (unlikely
+ (!_req || !_req->complete || !_req->buf
+ || !list_empty(&req->queue))) {
+ DEBUG("%s, bad params\n", __FUNCTION__);
+ return -EINVAL;
+ }
+
+ ep = container_of(_ep, struct lh7a40x_ep, ep);
+ if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) {
+ DEBUG("%s, bad ep\n", __FUNCTION__);
+ return -EINVAL;
+ }
+
+ dev = ep->dev;
+ if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) {
+ DEBUG("%s, bogus device state %p\n", __FUNCTION__, dev->driver);
+ return -ESHUTDOWN;
+ }
+
+ DEBUG("%s queue req %p, len %d buf %p\n", _ep->name, _req, _req->length,
+ _req->buf);
+
+ spin_lock_irqsave(&dev->lock, flags);
+
+ _req->status = -EINPROGRESS;
+ _req->actual = 0;
+
+ /* kickstart this i/o queue? */
+ DEBUG("Add to %d Q %d %d\n", ep_index(ep), list_empty(&ep->queue),
+ ep->stopped);
+ if (list_empty(&ep->queue) && likely(!ep->stopped)) {
+ u32 csr;
+
+ if (unlikely(ep_index(ep) == 0)) {
+ /* EP0 */
+ list_add_tail(&req->queue, &ep->queue);
+ lh7a40x_ep0_kick(dev, ep);
+ req = 0;
+ } else if (ep_is_in(ep)) {
+ /* EP1 & EP3 */
+ usb_set_index(ep_index(ep));
+ csr = usb_read(ep->csr1);
+ pio_irq_enable(ep_index(ep));
+ if ((csr & USB_IN_CSR1_FIFO_NOT_EMPTY) == 0) {
+ if (write_fifo(ep, req) == 1)
+ req = 0;
+ }
+ } else {
+ /* EP2 */
+ usb_set_index(ep_index(ep));
+ csr = usb_read(ep->csr1);
+ pio_irq_enable(ep_index(ep));
+ if (!(csr & USB_OUT_CSR1_FIFO_FULL)) {
+ if (read_fifo(ep, req) == 1)
+ req = 0;
+ }
+ }
+ }
+
+ /* pio or dma irq handler advances the queue. */
+ if (likely(req != 0))
+ list_add_tail(&req->queue, &ep->queue);
+
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ return 0;
+}
+
+/* dequeue JUST ONE request */
+static int lh7a40x_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct lh7a40x_ep *ep;
+ struct lh7a40x_request *req;
+ unsigned long flags;
+
+ DEBUG("%s, %p\n", __FUNCTION__, _ep);
+
+ ep = container_of(_ep, struct lh7a40x_ep, ep);
+ if (!_ep || ep->ep.name == ep0name)
+ return -EINVAL;
+
+ spin_lock_irqsave(&ep->dev->lock, flags);
+
+ /* make sure it's actually queued on this endpoint */
+ list_for_each_entry(req, &ep->queue, queue) {
+ if (&req->req == _req)
+ break;
+ }
+ if (&req->req != _req) {
+ spin_unlock_irqrestore(&ep->dev->lock, flags);
+ return -EINVAL;
+ }
+
+ done(ep, req, -ECONNRESET);
+
+ spin_unlock_irqrestore(&ep->dev->lock, flags);
+ return 0;
+}
+
+/** Halt specific EP
+ * Return 0 if success
+ * NOTE: Sets INDEX register to EP !
+ */
+static int lh7a40x_set_halt(struct usb_ep *_ep, int value)
+{
+ struct lh7a40x_ep *ep;
+ unsigned long flags;
+
+ ep = container_of(_ep, struct lh7a40x_ep, ep);
+ if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) {
+ DEBUG("%s, bad ep\n", __FUNCTION__);
+ return -EINVAL;
+ }
+
+ usb_set_index(ep_index(ep));
+
+ DEBUG("%s, ep %d, val %d\n", __FUNCTION__, ep_index(ep), value);
+
+ spin_lock_irqsave(&ep->dev->lock, flags);
+
+ if (ep_index(ep) == 0) {
+ /* EP0 */
+ usb_set(EP0_SEND_STALL, ep->csr1);
+ } else if (ep_is_in(ep)) {
+ u32 csr = usb_read(ep->csr1);
+ if (value && ((csr & USB_IN_CSR1_FIFO_NOT_EMPTY)
+ || !list_empty(&ep->queue))) {
+ /*
+ * Attempts to halt IN endpoints will fail (returning -EAGAIN)
+ * if any transfer requests are still queued, or if the controller
+ * FIFO still holds bytes that the host hasn’t collected.
+ */
+ spin_unlock_irqrestore(&ep->dev->lock, flags);
+ DEBUG
+ ("Attempt to halt IN endpoint failed (returning -EAGAIN) %d %d\n",
+ (csr & USB_IN_CSR1_FIFO_NOT_EMPTY),
+ !list_empty(&ep->queue));
+ return -EAGAIN;
+ }
+ flush(ep);
+ if (value)
+ usb_set(USB_IN_CSR1_SEND_STALL, ep->csr1);
+ else {
+ usb_clear(USB_IN_CSR1_SEND_STALL, ep->csr1);
+ usb_set(USB_IN_CSR1_CLR_DATA_TOGGLE, ep->csr1);
+ }
+
+ } else {
+
+ flush(ep);
+ if (value)
+ usb_set(USB_OUT_CSR1_SEND_STALL, ep->csr1);
+ else {
+ usb_clear(USB_OUT_CSR1_SEND_STALL, ep->csr1);
+ usb_set(USB_OUT_CSR1_CLR_DATA_REG, ep->csr1);
+ }
+ }
+
+ if (value) {
+ ep->stopped = 1;
+ } else {
+ ep->stopped = 0;
+ }
+
+ spin_unlock_irqrestore(&ep->dev->lock, flags);
+
+ DEBUG("%s %s halted\n", _ep->name, value == 0 ? "NOT" : "IS");
+
+ return 0;
+}
+
+/** Return bytes in EP FIFO
+ * NOTE: Sets INDEX register to EP
+ */
+static int lh7a40x_fifo_status(struct usb_ep *_ep)
+{
+ u32 csr;
+ int count = 0;
+ struct lh7a40x_ep *ep;
+
+ ep = container_of(_ep, struct lh7a40x_ep, ep);
+ if (!_ep) {
+ DEBUG("%s, bad ep\n", __FUNCTION__);
+ return -ENODEV;
+ }
+
+ DEBUG("%s, %d\n", __FUNCTION__, ep_index(ep));
+
+ /* LPD can't report unclaimed bytes from IN fifos */
+ if (ep_is_in(ep))
+ return -EOPNOTSUPP;
+
+ usb_set_index(ep_index(ep));
+
+ csr = usb_read(ep->csr1);
+ if (ep->dev->gadget.speed != USB_SPEED_UNKNOWN ||
+ csr & USB_OUT_CSR1_OUT_PKT_RDY) {
+ count = usb_read(USB_OUT_FIFO_WC1);
+ }
+
+ return count;
+}
+
+/** Flush EP FIFO
+ * NOTE: Sets INDEX register to EP
+ */
+static void lh7a40x_fifo_flush(struct usb_ep *_ep)
+{
+ struct lh7a40x_ep *ep;
+
+ ep = container_of(_ep, struct lh7a40x_ep, ep);
+ if (unlikely(!_ep || (!ep->desc && ep->ep.name != ep0name))) {
+ DEBUG("%s, bad ep\n", __FUNCTION__);
+ return;
+ }
+
+ usb_set_index(ep_index(ep));
+ flush(ep);
+}
+
+/****************************************************************/
+/* End Point 0 related functions */
+/****************************************************************/
+
+/* return: 0 = still running, 1 = completed, negative = errno */
+static int write_fifo_ep0(struct lh7a40x_ep *ep, struct lh7a40x_request *req)
+{
+ u32 max;
+ unsigned count;
+ int is_last;
+
+ max = ep_maxpacket(ep);
+
+ DEBUG_EP0("%s\n", __FUNCTION__);
+
+ count = write_packet(ep, req, max);
+
+ /* last packet is usually short (or a zlp) */
+ if (unlikely(count != max))
+ is_last = 1;
+ else {
+ if (likely(req->req.length != req->req.actual) || req->req.zero)
+ is_last = 0;
+ else
+ is_last = 1;
+ }
+
+ DEBUG_EP0("%s: wrote %s %d bytes%s %d left %p\n", __FUNCTION__,
+ ep->ep.name, count,
+ is_last ? "/L" : "", req->req.length - req->req.actual, req);
+
+ /* requests complete when all IN data is in the FIFO */
+ if (is_last) {
+ done(ep, req, 0);
+ return 1;
+ }
+
+ return 0;
+}
+
+static __inline__ int lh7a40x_fifo_read(struct lh7a40x_ep *ep,
+ unsigned char *cp, int max)
+{
+ int bytes;
+ int count = usb_read(USB_OUT_FIFO_WC1);
+ volatile u32 *fifo = (volatile u32 *)ep->fifo;
+
+ if (count > max)
+ count = max;
+ bytes = count;
+ while (count--)
+ *cp++ = *fifo & 0xFF;
+ return bytes;
+}
+
+static __inline__ void lh7a40x_fifo_write(struct lh7a40x_ep *ep,
+ unsigned char *cp, int count)
+{
+ volatile u32 *fifo = (volatile u32 *)ep->fifo;
+ DEBUG_EP0("fifo_write: %d %d\n", ep_index(ep), count);
+ while (count--)
+ *fifo = *cp++;
+}
+
+static int read_fifo_ep0(struct lh7a40x_ep *ep, struct lh7a40x_request *req)
+{
+ u32 csr;
+ u8 *buf;
+ unsigned bufferspace, count, is_short;
+ volatile u32 *fifo = (volatile u32 *)ep->fifo;
+
+ DEBUG_EP0("%s\n", __FUNCTION__);
+
+ csr = usb_read(USB_EP0_CSR);
+ if (!(csr & USB_OUT_CSR1_OUT_PKT_RDY))
+ return 0;
+
+ buf = req->req.buf + req->req.actual;
+ prefetchw(buf);
+ bufferspace = req->req.length - req->req.actual;
+
+ /* read all bytes from this packet */
+ if (likely(csr & EP0_OUT_PKT_RDY)) {
+ count = usb_read(USB_OUT_FIFO_WC1);
+ req->req.actual += min(count, bufferspace);
+ } else /* zlp */
+ count = 0;
+
+ is_short = (count < ep->ep.maxpacket);
+ DEBUG_EP0("read %s %02x, %d bytes%s req %p %d/%d\n",
+ ep->ep.name, csr, count,
+ is_short ? "/S" : "", req, req->req.actual, req->req.length);
+
+ while (likely(count-- != 0)) {
+ u8 byte = (u8) (*fifo & 0xff);
+
+ if (unlikely(bufferspace == 0)) {
+ /* this happens when the driver's buffer
+ * is smaller than what the host sent.
+ * discard the extra data.
+ */
+ if (req->req.status != -EOVERFLOW)
+ DEBUG_EP0("%s overflow %d\n", ep->ep.name,
+ count);
+ req->req.status = -EOVERFLOW;
+ } else {
+ *buf++ = byte;
+ bufferspace--;
+ }
+ }
+
+ /* completion */
+ if (is_short || req->req.actual == req->req.length) {
+ done(ep, req, 0);
+ return 1;
+ }
+
+ /* finished that packet. the next one may be waiting... */
+ return 0;
+}
+
+/**
+ * udc_set_address - set the USB address for this device
+ * @address:
+ *
+ * Called from control endpoint function after it decodes a set address setup packet.
+ */
+static void udc_set_address(struct lh7a40x_udc *dev, unsigned char address)
+{
+ DEBUG_EP0("%s: %d\n", __FUNCTION__, address);
+ /* c.f. 15.1.2.2 Table 15-4 address will be used after DATA_END is set */
+ dev->usb_address = address;
+ usb_set((address & USB_FA_FUNCTION_ADDR), USB_FA);
+ usb_set(USB_FA_ADDR_UPDATE | (address & USB_FA_FUNCTION_ADDR), USB_FA);
+ /* usb_read(USB_FA); */
+}
+
+/*
+ * DATA_STATE_RECV (OUT_PKT_RDY)
+ * - if error
+ * set EP0_CLR_OUT | EP0_DATA_END | EP0_SEND_STALL bits
+ * - else
+ * set EP0_CLR_OUT bit
+ if last set EP0_DATA_END bit
+ */
+static void lh7a40x_ep0_out(struct lh7a40x_udc *dev, u32 csr)
+{
+ struct lh7a40x_request *req;
+ struct lh7a40x_ep *ep = &dev->ep[0];
+ int ret;
+
+ DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
+
+ if (list_empty(&ep->queue))
+ req = 0;
+ else
+ req = list_entry(ep->queue.next, struct lh7a40x_request, queue);
+
+ if (req) {
+
+ if (req->req.length == 0) {
+ DEBUG_EP0("ZERO LENGTH OUT!\n");
+ usb_set((EP0_CLR_OUT | EP0_DATA_END), USB_EP0_CSR);
+ dev->ep0state = WAIT_FOR_SETUP;
+ return;
+ }
+ ret = read_fifo_ep0(ep, req);
+ if (ret) {
+ /* Done! */
+ DEBUG_EP0("%s: finished, waiting for status\n",
+ __FUNCTION__);
+
+ usb_set((EP0_CLR_OUT | EP0_DATA_END), USB_EP0_CSR);
+ dev->ep0state = WAIT_FOR_SETUP;
+ } else {
+ /* Not done yet.. */
+ DEBUG_EP0("%s: not finished\n", __FUNCTION__);
+ usb_set(EP0_CLR_OUT, USB_EP0_CSR);
+ }
+ } else {
+ DEBUG_EP0("NO REQ??!\n");
+ }
+}
+
+/*
+ * DATA_STATE_XMIT
+ */
+static int lh7a40x_ep0_in(struct lh7a40x_udc *dev, u32 csr)
+{
+ struct lh7a40x_request *req;
+ struct lh7a40x_ep *ep = &dev->ep[0];
+ int ret, need_zlp = 0;
+
+ DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
+
+ if (list_empty(&ep->queue))
+ req = 0;
+ else
+ req = list_entry(ep->queue.next, struct lh7a40x_request, queue);
+
+ if (!req) {
+ DEBUG_EP0("%s: NULL REQ\n", __FUNCTION__);
+ return 0;
+ }
+
+ if (req->req.length == 0) {
+
+ usb_set((EP0_IN_PKT_RDY | EP0_DATA_END), USB_EP0_CSR);
+ dev->ep0state = WAIT_FOR_SETUP;
+ return 1;
+ }
+
+ if (req->req.length - req->req.actual == EP0_PACKETSIZE) {
+ /* Next write will end with the packet size, */
+ /* so we need Zero-length-packet */
+ need_zlp = 1;
+ }
+
+ ret = write_fifo_ep0(ep, req);
+
+ if (ret == 1 && !need_zlp) {
+ /* Last packet */
+ DEBUG_EP0("%s: finished, waiting for status\n", __FUNCTION__);
+
+ usb_set((EP0_IN_PKT_RDY | EP0_DATA_END), USB_EP0_CSR);
+ dev->ep0state = WAIT_FOR_SETUP;
+ } else {
+ DEBUG_EP0("%s: not finished\n", __FUNCTION__);
+ usb_set(EP0_IN_PKT_RDY, USB_EP0_CSR);
+ }
+
+ if (need_zlp) {
+ DEBUG_EP0("%s: Need ZLP!\n", __FUNCTION__);
+ usb_set(EP0_IN_PKT_RDY, USB_EP0_CSR);
+ dev->ep0state = DATA_STATE_NEED_ZLP;
+ }
+
+ return 1;
+}
+
+static int lh7a40x_handle_get_status(struct lh7a40x_udc *dev,
+ struct usb_ctrlrequest *ctrl)
+{
+ struct lh7a40x_ep *ep0 = &dev->ep[0];
+ struct lh7a40x_ep *qep;
+ int reqtype = (ctrl->bRequestType & USB_RECIP_MASK);
+ u16 val = 0;
+
+ if (reqtype == USB_RECIP_INTERFACE) {
+ /* This is not supported.
+ * And according to the USB spec, this one does nothing..
+ * Just return 0
+ */
+ DEBUG_SETUP("GET_STATUS: USB_RECIP_INTERFACE\n");
+ } else if (reqtype == USB_RECIP_DEVICE) {
+ DEBUG_SETUP("GET_STATUS: USB_RECIP_DEVICE\n");
+ val |= (1 << 0); /* Self powered */
+ /*val |= (1<<1); *//* Remote wakeup */
+ } else if (reqtype == USB_RECIP_ENDPOINT) {
+ int ep_num = (ctrl->wIndex & ~USB_DIR_IN);
+
+ DEBUG_SETUP
+ ("GET_STATUS: USB_RECIP_ENDPOINT (%d), ctrl->wLength = %d\n",
+ ep_num, ctrl->wLength);
+
+ if (ctrl->wLength > 2 || ep_num > 3)
+ return -EOPNOTSUPP;
+
+ qep = &dev->ep[ep_num];
+ if (ep_is_in(qep) != ((ctrl->wIndex & USB_DIR_IN) ? 1 : 0)
+ && ep_index(qep) != 0) {
+ return -EOPNOTSUPP;
+ }
+
+ usb_set_index(ep_index(qep));
+
+ /* Return status on next IN token */
+ switch (qep->ep_type) {
+ case ep_control:
+ val =
+ (usb_read(qep->csr1) & EP0_SEND_STALL) ==
+ EP0_SEND_STALL;
+ break;
+ case ep_bulk_in:
+ case ep_interrupt:
+ val =
+ (usb_read(qep->csr1) & USB_IN_CSR1_SEND_STALL) ==
+ USB_IN_CSR1_SEND_STALL;
+ break;
+ case ep_bulk_out:
+ val =
+ (usb_read(qep->csr1) & USB_OUT_CSR1_SEND_STALL) ==
+ USB_OUT_CSR1_SEND_STALL;
+ break;
+ }
+
+ /* Back to EP0 index */
+ usb_set_index(0);
+
+ DEBUG_SETUP("GET_STATUS, ep: %d (%x), val = %d\n", ep_num,
+ ctrl->wIndex, val);
+ } else {
+ DEBUG_SETUP("Unknown REQ TYPE: %d\n", reqtype);
+ return -EOPNOTSUPP;
+ }
+
+ /* Clear "out packet ready" */
+ usb_set((EP0_CLR_OUT), USB_EP0_CSR);
+ /* Put status to FIFO */
+ lh7a40x_fifo_write(ep0, (u8 *) & val, sizeof(val));
+ /* Issue "In packet ready" */
+ usb_set((EP0_IN_PKT_RDY | EP0_DATA_END), USB_EP0_CSR);
+
+ return 0;
+}
+
+/*
+ * WAIT_FOR_SETUP (OUT_PKT_RDY)
+ * - read data packet from EP0 FIFO
+ * - decode command
+ * - if error
+ * set EP0_CLR_OUT | EP0_DATA_END | EP0_SEND_STALL bits
+ * - else
+ * set EP0_CLR_OUT | EP0_DATA_END bits
+ */
+static void lh7a40x_ep0_setup(struct lh7a40x_udc *dev, u32 csr)
+{
+ struct lh7a40x_ep *ep = &dev->ep[0];
+ struct usb_ctrlrequest ctrl;
+ int i, bytes, is_in;
+
+ DEBUG_SETUP("%s: %x\n", __FUNCTION__, csr);
+
+ /* Nuke all previous transfers */
+ nuke(ep, -EPROTO);
+
+ /* read control req from fifo (8 bytes) */
+ bytes = lh7a40x_fifo_read(ep, (unsigned char *)&ctrl, 8);
+
+ DEBUG_SETUP("Read CTRL REQ %d bytes\n", bytes);
+ DEBUG_SETUP("CTRL.bRequestType = %d (is_in %d)\n", ctrl.bRequestType,
+ ctrl.bRequestType == USB_DIR_IN);
+ DEBUG_SETUP("CTRL.bRequest = %d\n", ctrl.bRequest);
+ DEBUG_SETUP("CTRL.wLength = %d\n", ctrl.wLength);
+ DEBUG_SETUP("CTRL.wValue = %d (%d)\n", ctrl.wValue, ctrl.wValue >> 8);
+ DEBUG_SETUP("CTRL.wIndex = %d\n", ctrl.wIndex);
+
+ /* Set direction of EP0 */
+ if (likely(ctrl.bRequestType & USB_DIR_IN)) {
+ ep->bEndpointAddress |= USB_DIR_IN;
+ is_in = 1;
+ } else {
+ ep->bEndpointAddress &= ~USB_DIR_IN;
+ is_in = 0;
+ }
+
+ dev->req_pending = 1;
+
+ /* Handle some SETUP packets ourselves */
+ switch (ctrl.bRequest) {
+ case USB_REQ_SET_ADDRESS:
+ if (ctrl.bRequestType != (USB_TYPE_STANDARD | USB_RECIP_DEVICE))
+ break;
+
+ DEBUG_SETUP("USB_REQ_SET_ADDRESS (%d)\n", ctrl.wValue);
+ udc_set_address(dev, ctrl.wValue);
+ usb_set((EP0_CLR_OUT | EP0_DATA_END), USB_EP0_CSR);
+ return;
+
+ case USB_REQ_GET_STATUS:{
+ if (lh7a40x_handle_get_status(dev, &ctrl) == 0)
+ return;
+
+ case USB_REQ_CLEAR_FEATURE:
+ case USB_REQ_SET_FEATURE:
+ if (ctrl.bRequestType == USB_RECIP_ENDPOINT) {
+ struct lh7a40x_ep *qep;
+ int ep_num = (ctrl.wIndex & 0x0f);
+
+ /* Support only HALT feature */
+ if (ctrl.wValue != 0 || ctrl.wLength != 0
+ || ep_num > 3 || ep_num < 1)
+ break;
+
+ qep = &dev->ep[ep_num];
+ if (ctrl.bRequest == USB_REQ_SET_FEATURE) {
+ DEBUG_SETUP("SET_FEATURE (%d)\n",
+ ep_num);
+ lh7a40x_set_halt(&qep->ep, 1);
+ } else {
+ DEBUG_SETUP("CLR_FEATURE (%d)\n",
+ ep_num);
+ lh7a40x_set_halt(&qep->ep, 0);
+ }
+ usb_set_index(0);
+
+ /* Reply with a ZLP on next IN token */
+ usb_set((EP0_CLR_OUT | EP0_DATA_END),
+ USB_EP0_CSR);
+ return;
+ }
+ break;
+ }
+
+ default:
+ break;
+ }
+
+ if (likely(dev->driver)) {
+ /* device-2-host (IN) or no data setup command, process immediately */
+ spin_unlock(&dev->lock);
+ i = dev->driver->setup(&dev->gadget, &ctrl);
+ spin_lock(&dev->lock);
+
+ if (i < 0) {
+ /* setup processing failed, force stall */
+ DEBUG_SETUP
+ (" --> ERROR: gadget setup FAILED (stalling), setup returned %d\n",
+ i);
+ usb_set_index(0);
+ usb_set((EP0_CLR_OUT | EP0_DATA_END | EP0_SEND_STALL),
+ USB_EP0_CSR);
+
+ /* ep->stopped = 1; */
+ dev->ep0state = WAIT_FOR_SETUP;
+ }
+ }
+}
+
+/*
+ * DATA_STATE_NEED_ZLP
+ */
+static void lh7a40x_ep0_in_zlp(struct lh7a40x_udc *dev, u32 csr)
+{
+ DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
+
+ /* c.f. Table 15-14 */
+ usb_set((EP0_IN_PKT_RDY | EP0_DATA_END), USB_EP0_CSR);
+ dev->ep0state = WAIT_FOR_SETUP;
+}
+
+/*
+ * handle ep0 interrupt
+ */
+static void lh7a40x_handle_ep0(struct lh7a40x_udc *dev, u32 intr)
+{
+ struct lh7a40x_ep *ep = &dev->ep[0];
+ u32 csr;
+
+ /* Set index 0 */
+ usb_set_index(0);
+ csr = usb_read(USB_EP0_CSR);
+
+ DEBUG_EP0("%s: csr = %x\n", __FUNCTION__, csr);
+
+ /*
+ * For overview of what we should be doing see c.f. Chapter 18.1.2.4
+ * We will follow that outline here modified by our own global state
+ * indication which provides hints as to what we think should be
+ * happening..
+ */
+
+ /*
+ * if SENT_STALL is set
+ * - clear the SENT_STALL bit
+ */
+ if (csr & EP0_SENT_STALL) {
+ DEBUG_EP0("%s: EP0_SENT_STALL is set: %x\n", __FUNCTION__, csr);
+ usb_clear((EP0_SENT_STALL | EP0_SEND_STALL), USB_EP0_CSR);
+ nuke(ep, -ECONNABORTED);
+ dev->ep0state = WAIT_FOR_SETUP;
+ return;
+ }
+
+ /*
+ * if a transfer is in progress && IN_PKT_RDY and OUT_PKT_RDY are clear
+ * - fill EP0 FIFO
+ * - if last packet
+ * - set IN_PKT_RDY | DATA_END
+ * - else
+ * set IN_PKT_RDY
+ */
+ if (!(csr & (EP0_IN_PKT_RDY | EP0_OUT_PKT_RDY))) {
+ DEBUG_EP0("%s: IN_PKT_RDY and OUT_PKT_RDY are clear\n",
+ __FUNCTION__);
+
+ switch (dev->ep0state) {
+ case DATA_STATE_XMIT:
+ DEBUG_EP0("continue with DATA_STATE_XMIT\n");
+ lh7a40x_ep0_in(dev, csr);
+ return;
+ case DATA_STATE_NEED_ZLP:
+ DEBUG_EP0("continue with DATA_STATE_NEED_ZLP\n");
+ lh7a40x_ep0_in_zlp(dev, csr);
+ return;
+ default:
+ /* Stall? */
+ DEBUG_EP0("Odd state!! state = %s\n",
+ state_names[dev->ep0state]);
+ dev->ep0state = WAIT_FOR_SETUP;
+ /* nuke(ep, 0); */
+ /* usb_set(EP0_SEND_STALL, ep->csr1); */
+ break;
+ }
+ }
+
+ /*
+ * if SETUP_END is set
+ * - abort the last transfer
+ * - set SERVICED_SETUP_END_BIT
+ */
+ if (csr & EP0_SETUP_END) {
+ DEBUG_EP0("%s: EP0_SETUP_END is set: %x\n", __FUNCTION__, csr);
+
+ usb_set(EP0_CLR_SETUP_END, USB_EP0_CSR);
+
+ nuke(ep, 0);
+ dev->ep0state = WAIT_FOR_SETUP;
+ }
+
+ /*
+ * if EP0_OUT_PKT_RDY is set
+ * - read data packet from EP0 FIFO
+ * - decode command
+ * - if error
+ * set SERVICED_OUT_PKT_RDY | DATA_END bits | SEND_STALL
+ * - else
+ * set SERVICED_OUT_PKT_RDY | DATA_END bits
+ */
+ if (csr & EP0_OUT_PKT_RDY) {
+
+ DEBUG_EP0("%s: EP0_OUT_PKT_RDY is set: %x\n", __FUNCTION__,
+ csr);
+
+ switch (dev->ep0state) {
+ case WAIT_FOR_SETUP:
+ DEBUG_EP0("WAIT_FOR_SETUP\n");
+ lh7a40x_ep0_setup(dev, csr);
+ break;
+
+ case DATA_STATE_RECV:
+ DEBUG_EP0("DATA_STATE_RECV\n");
+ lh7a40x_ep0_out(dev, csr);
+ break;
+
+ default:
+ /* send stall? */
+ DEBUG_EP0("strange state!! 2. send stall? state = %d\n",
+ dev->ep0state);
+ break;
+ }
+ }
+}
+
+static void lh7a40x_ep0_kick(struct lh7a40x_udc *dev, struct lh7a40x_ep *ep)
+{
+ u32 csr;
+
+ usb_set_index(0);
+ csr = usb_read(USB_EP0_CSR);
+
+ DEBUG_EP0("%s: %x\n", __FUNCTION__, csr);
+
+ /* Clear "out packet ready" */
+ usb_set(EP0_CLR_OUT, USB_EP0_CSR);
+
+ if (ep_is_in(ep)) {
+ dev->ep0state = DATA_STATE_XMIT;
+ lh7a40x_ep0_in(dev, csr);
+ } else {
+ dev->ep0state = DATA_STATE_RECV;
+ lh7a40x_ep0_out(dev, csr);
+ }
+}
+
+/* ---------------------------------------------------------------------------
+ * device-scoped parts of the api to the usb controller hardware
+ * ---------------------------------------------------------------------------
+ */
+
+static int lh7a40x_udc_get_frame(struct usb_gadget *_gadget)
+{
+ u32 frame1 = usb_read(USB_FRM_NUM1); /* Least significant 8 bits */
+ u32 frame2 = usb_read(USB_FRM_NUM2); /* Most significant 3 bits */
+ DEBUG("%s, %p\n", __FUNCTION__, _gadget);
+ return ((frame2 & 0x07) << 8) | (frame1 & 0xff);
+}
+
+static int lh7a40x_udc_wakeup(struct usb_gadget *_gadget)
+{
+ /* host may not have enabled remote wakeup */
+ /*if ((UDCCS0 & UDCCS0_DRWF) == 0)
+ return -EHOSTUNREACH;
+ udc_set_mask_UDCCR(UDCCR_RSM); */
+ return -ENOTSUPP;
+}
+
+static const struct usb_gadget_ops lh7a40x_udc_ops = {
+ .get_frame = lh7a40x_udc_get_frame,
+ .wakeup = lh7a40x_udc_wakeup,
+ /* current versions must always be self-powered */
+};
+
+static void nop_release(struct device *dev)
+{
+ DEBUG("%s %s\n", __FUNCTION__, dev->bus_id);
+}
+
+static struct lh7a40x_udc memory = {
+ .usb_address = 0,
+
+ .gadget = {
+ .ops = &lh7a40x_udc_ops,
+ .ep0 = &memory.ep[0].ep,
+ .name = driver_name,
+ .dev = {
+ .bus_id = "gadget",
+ .release = nop_release,
+ },
+ },
+
+ /* control endpoint */
+ .ep[0] = {
+ .ep = {
+ .name = ep0name,
+ .ops = &lh7a40x_ep_ops,
+ .maxpacket = EP0_PACKETSIZE,
+ },
+ .dev = &memory,
+
+ .bEndpointAddress = 0,
+ .bmAttributes = 0,
+
+ .ep_type = ep_control,
+ .fifo = io_p2v(USB_EP0_FIFO),
+ .csr1 = USB_EP0_CSR,
+ .csr2 = USB_EP0_CSR,
+ },
+
+ /* first group of endpoints */
+ .ep[1] = {
+ .ep = {
+ .name = "ep1in-bulk",
+ .ops = &lh7a40x_ep_ops,
+ .maxpacket = 64,
+ },
+ .dev = &memory,
+
+ .bEndpointAddress = USB_DIR_IN | 1,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+
+ .ep_type = ep_bulk_in,
+ .fifo = io_p2v(USB_EP1_FIFO),
+ .csr1 = USB_IN_CSR1,
+ .csr2 = USB_IN_CSR2,
+ },
+
+ .ep[2] = {
+ .ep = {
+ .name = "ep2out-bulk",
+ .ops = &lh7a40x_ep_ops,
+ .maxpacket = 64,
+ },
+ .dev = &memory,
+
+ .bEndpointAddress = 2,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+
+ .ep_type = ep_bulk_out,
+ .fifo = io_p2v(USB_EP2_FIFO),
+ .csr1 = USB_OUT_CSR1,
+ .csr2 = USB_OUT_CSR2,
+ },
+
+ .ep[3] = {
+ .ep = {
+ .name = "ep3in-int",
+ .ops = &lh7a40x_ep_ops,
+ .maxpacket = 64,
+ },
+ .dev = &memory,
+
+ .bEndpointAddress = USB_DIR_IN | 3,
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+
+ .ep_type = ep_interrupt,
+ .fifo = io_p2v(USB_EP3_FIFO),
+ .csr1 = USB_IN_CSR1,
+ .csr2 = USB_IN_CSR2,
+ },
+};
+
+/*
+ * probe - binds to the platform device
+ */
+static int lh7a40x_udc_probe(struct device *_dev)
+{
+ struct lh7a40x_udc *dev = &memory;
+ int retval;
+
+ DEBUG("%s: %p\n", __FUNCTION__, _dev);
+
+ spin_lock_init(&dev->lock);
+ dev->dev = _dev;
+
+ device_initialize(&dev->gadget.dev);
+ dev->gadget.dev.parent = _dev;
+
+ the_controller = dev;
+ dev_set_drvdata(_dev, dev);
+
+ udc_disable(dev);
+ udc_reinit(dev);
+
+ /* irq setup after old hardware state is cleaned up */
+ retval =
+ request_irq(IRQ_USBINTR, lh7a40x_udc_irq, SA_INTERRUPT, driver_name,
+ dev);
+ if (retval != 0) {
+ DEBUG(KERN_ERR "%s: can't get irq %i, err %d\n", driver_name,
+ IRQ_USBINTR, retval);
+ return -EBUSY;
+ }
+
+ create_proc_files();
+
+ return retval;
+}
+
+static int lh7a40x_udc_remove(struct device *_dev)
+{
+ struct lh7a40x_udc *dev = _dev->driver_data;
+
+ DEBUG("%s: %p\n", __FUNCTION__, dev);
+
+ udc_disable(dev);
+ remove_proc_files();
+ usb_gadget_unregister_driver(dev->driver);
+
+ free_irq(IRQ_USBINTR, dev);
+
+ dev_set_drvdata(_dev, 0);
+
+ the_controller = 0;
+
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct device_driver udc_driver = {
+ .name = (char *)driver_name,
+ .bus = &platform_bus_type,
+ .probe = lh7a40x_udc_probe,
+ .remove = lh7a40x_udc_remove
+ /* FIXME power management support */
+ /* .suspend = ... disable UDC */
+ /* .resume = ... re-enable UDC */
+};
+
+static int __init udc_init(void)
+{
+ DEBUG("%s: %s version %s\n", __FUNCTION__, driver_name, DRIVER_VERSION);
+ return driver_register(&udc_driver);
+}
+
+static void __exit udc_exit(void)
+{
+ driver_unregister(&udc_driver);
+}
+
+module_init(udc_init);
+module_exit(udc_exit);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Mikko Lahteenmaki, Bo Henriksen");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/lh7a40x_udc.h b/drivers/usb/gadget/lh7a40x_udc.h
new file mode 100644
index 00000000000..1bb455c045a
--- /dev/null
+++ b/drivers/usb/gadget/lh7a40x_udc.h
@@ -0,0 +1,261 @@
+/*
+ * linux/drivers/usb/gadget/lh7a40x_udc.h
+ * Sharp LH7A40x on-chip full speed USB device controllers
+ *
+ * Copyright (C) 2004 Mikko Lahteenmaki, Nordic ID
+ * Copyright (C) 2004 Bo Henriksen, Nordic ID
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __LH7A40X_H_
+#define __LH7A40X_H_
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/proc_fs.h>
+#include <linux/mm.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/byteorder.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/unaligned.h>
+#include <asm/hardware.h>
+
+#include <linux/usb_ch9.h>
+#include <linux/usb_gadget.h>
+
+/*
+ * Memory map
+ */
+
+#define USB_FA 0x80000200 // function address register
+#define USB_PM 0x80000204 // power management register
+
+#define USB_IN_INT 0x80000208 // IN interrupt register bank (EP0-EP3)
+#define USB_OUT_INT 0x80000210 // OUT interrupt register bank (EP2)
+#define USB_INT 0x80000218 // interrupt register bank
+
+#define USB_IN_INT_EN 0x8000021C // IN interrupt enable register bank
+#define USB_OUT_INT_EN 0x80000224 // OUT interrupt enable register bank
+#define USB_INT_EN 0x8000022C // USB interrupt enable register bank
+
+#define USB_FRM_NUM1 0x80000230 // Frame number1 register
+#define USB_FRM_NUM2 0x80000234 // Frame number2 register
+#define USB_INDEX 0x80000238 // index register
+
+#define USB_IN_MAXP 0x80000240 // IN MAXP register
+#define USB_IN_CSR1 0x80000244 // IN CSR1 register/EP0 CSR register
+#define USB_EP0_CSR 0x80000244 // IN CSR1 register/EP0 CSR register
+#define USB_IN_CSR2 0x80000248 // IN CSR2 register
+#define USB_OUT_MAXP 0x8000024C // OUT MAXP register
+
+#define USB_OUT_CSR1 0x80000250 // OUT CSR1 register
+#define USB_OUT_CSR2 0x80000254 // OUT CSR2 register
+#define USB_OUT_FIFO_WC1 0x80000258 // OUT FIFO write count1 register
+#define USB_OUT_FIFO_WC2 0x8000025C // OUT FIFO write count2 register
+
+#define USB_RESET 0x8000044C // USB reset register
+
+#define USB_EP0_FIFO 0x80000280
+#define USB_EP1_FIFO 0x80000284
+#define USB_EP2_FIFO 0x80000288
+#define USB_EP3_FIFO 0x8000028c
+
+/*
+ * USB reset register
+ */
+#define USB_RESET_APB (1<<1) //resets USB APB control side WRITE
+#define USB_RESET_IO (1<<0) //resets USB IO side WRITE
+
+/*
+ * USB function address register
+ */
+#define USB_FA_ADDR_UPDATE (1<<7)
+#define USB_FA_FUNCTION_ADDR (0x7F)
+
+/*
+ * Power Management register
+ */
+#define PM_USB_DCP (1<<5)
+#define PM_USB_ENABLE (1<<4)
+#define PM_USB_RESET (1<<3)
+#define PM_UC_RESUME (1<<2)
+#define PM_SUSPEND_MODE (1<<1)
+#define PM_ENABLE_SUSPEND (1<<0)
+
+/*
+ * IN interrupt register
+ */
+#define USB_IN_INT_EP3 (1<<3)
+#define USB_IN_INT_EP1 (1<<1)
+#define USB_IN_INT_EP0 (1<<0)
+
+/*
+ * OUT interrupt register
+ */
+#define USB_OUT_INT_EP2 (1<<2)
+
+/*
+ * USB interrupt register
+ */
+#define USB_INT_RESET_INT (1<<2)
+#define USB_INT_RESUME_INT (1<<1)
+#define USB_INT_SUSPEND_INT (1<<0)
+
+/*
+ * USB interrupt enable register
+ */
+#define USB_INT_EN_USB_RESET_INTER (1<<2)
+#define USB_INT_EN_RESUME_INTER (1<<1)
+#define USB_INT_EN_SUSPEND_INTER (1<<0)
+
+/*
+ * INCSR1 register
+ */
+#define USB_IN_CSR1_CLR_DATA_TOGGLE (1<<6)
+#define USB_IN_CSR1_SENT_STALL (1<<5)
+#define USB_IN_CSR1_SEND_STALL (1<<4)
+#define USB_IN_CSR1_FIFO_FLUSH (1<<3)
+#define USB_IN_CSR1_FIFO_NOT_EMPTY (1<<1)
+#define USB_IN_CSR1_IN_PKT_RDY (1<<0)
+
+/*
+ * INCSR2 register
+ */
+#define USB_IN_CSR2_AUTO_SET (1<<7)
+#define USB_IN_CSR2_USB_DMA_EN (1<<4)
+
+/*
+ * OUT CSR1 register
+ */
+#define USB_OUT_CSR1_CLR_DATA_REG (1<<7)
+#define USB_OUT_CSR1_SENT_STALL (1<<6)
+#define USB_OUT_CSR1_SEND_STALL (1<<5)
+#define USB_OUT_CSR1_FIFO_FLUSH (1<<4)
+#define USB_OUT_CSR1_FIFO_FULL (1<<1)
+#define USB_OUT_CSR1_OUT_PKT_RDY (1<<0)
+
+/*
+ * OUT CSR2 register
+ */
+#define USB_OUT_CSR2_AUTO_CLR (1<<7)
+#define USB_OUT_CSR2_USB_DMA_EN (1<<4)
+
+/*
+ * EP0 CSR
+ */
+#define EP0_CLR_SETUP_END (1<<7) /* Clear "Setup Ends" Bit (w) */
+#define EP0_CLR_OUT (1<<6) /* Clear "Out packet ready" Bit (w) */
+#define EP0_SEND_STALL (1<<5) /* Send STALL Handshake (rw) */
+#define EP0_SETUP_END (1<<4) /* Setup Ends (r) */
+
+#define EP0_DATA_END (1<<3) /* Data end (rw) */
+#define EP0_SENT_STALL (1<<2) /* Sent Stall Handshake (r) */
+#define EP0_IN_PKT_RDY (1<<1) /* In packet ready (rw) */
+#define EP0_OUT_PKT_RDY (1<<0) /* Out packet ready (r) */
+
+/* general CSR */
+#define OUT_PKT_RDY (1<<0)
+#define IN_PKT_RDY (1<<0)
+
+/*
+ * IN/OUT MAXP register
+ */
+#define USB_OUT_MAXP_MAXP (0xF)
+#define USB_IN_MAXP_MAXP (0xF)
+
+// Max packet size
+//#define EP0_PACKETSIZE 0x10
+#define EP0_PACKETSIZE 0x8
+#define EP0_MAXPACKETSIZE 0x10
+
+#define UDC_MAX_ENDPOINTS 4
+
+#define WAIT_FOR_SETUP 0
+#define DATA_STATE_XMIT 1
+#define DATA_STATE_NEED_ZLP 2
+#define WAIT_FOR_OUT_STATUS 3
+#define DATA_STATE_RECV 4
+
+/* ********************************************************************************************* */
+/* IO
+ */
+
+typedef enum ep_type {
+ ep_control, ep_bulk_in, ep_bulk_out, ep_interrupt
+} ep_type_t;
+
+struct lh7a40x_ep {
+ struct usb_ep ep;
+ struct lh7a40x_udc *dev;
+
+ const struct usb_endpoint_descriptor *desc;
+ struct list_head queue;
+ unsigned long pio_irqs;
+
+ u8 stopped;
+ u8 bEndpointAddress;
+ u8 bmAttributes;
+
+ ep_type_t ep_type;
+ u32 fifo;
+ u32 csr1;
+ u32 csr2;
+};
+
+struct lh7a40x_request {
+ struct usb_request req;
+ struct list_head queue;
+};
+
+struct lh7a40x_udc {
+ struct usb_gadget gadget;
+ struct usb_gadget_driver *driver;
+ struct device *dev;
+ spinlock_t lock;
+
+ int ep0state;
+ struct lh7a40x_ep ep[UDC_MAX_ENDPOINTS];
+
+ unsigned char usb_address;
+
+ unsigned req_pending:1, req_std:1, req_config:1;
+};
+
+extern struct lh7a40x_udc *the_controller;
+
+#define ep_is_in(EP) (((EP)->bEndpointAddress&USB_DIR_IN)==USB_DIR_IN)
+#define ep_index(EP) ((EP)->bEndpointAddress&0xF)
+#define ep_maxpacket(EP) ((EP)->ep.maxpacket)
+
+#endif
diff --git a/drivers/usb/gadget/ndis.h b/drivers/usb/gadget/ndis.h
new file mode 100644
index 00000000000..c553bbf68ca
--- /dev/null
+++ b/drivers/usb/gadget/ndis.h
@@ -0,0 +1,217 @@
+/*
+ * ndis.h
+ *
+ * ntddndis.h modified by Benedikt Spranger <b.spranger@pengutronix.de>
+ *
+ * Thanks to the cygwin development team,
+ * espacially to Casper S. Hornstrup <chorns@users.sourceforge.net>
+ *
+ * THIS SOFTWARE IS NOT COPYRIGHTED
+ *
+ * This source code is offered for use in the public domain. You may
+ * use, modify or distribute it freely.
+ *
+ * This code is distributed in the hope that it will be useful but
+ * WITHOUT ANY WARRANTY. ALL WARRANTIES, EXPRESS OR IMPLIED ARE HEREBY
+ * DISCLAIMED. This includes but is not limited to warranties of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ */
+
+#ifndef _LINUX_NDIS_H
+#define _LINUX_NDIS_H
+
+
+#define NDIS_STATUS_MULTICAST_FULL 0xC0010009
+#define NDIS_STATUS_MULTICAST_EXISTS 0xC001000A
+#define NDIS_STATUS_MULTICAST_NOT_FOUND 0xC001000B
+
+enum NDIS_DEVICE_POWER_STATE {
+ NdisDeviceStateUnspecified = 0,
+ NdisDeviceStateD0,
+ NdisDeviceStateD1,
+ NdisDeviceStateD2,
+ NdisDeviceStateD3,
+ NdisDeviceStateMaximum
+};
+
+struct NDIS_PM_WAKE_UP_CAPABILITIES {
+ enum NDIS_DEVICE_POWER_STATE MinMagicPacketWakeUp;
+ enum NDIS_DEVICE_POWER_STATE MinPatternWakeUp;
+ enum NDIS_DEVICE_POWER_STATE MinLinkChangeWakeUp;
+};
+
+/* NDIS_PNP_CAPABILITIES.Flags constants */
+#define NDIS_DEVICE_WAKE_UP_ENABLE 0x00000001
+#define NDIS_DEVICE_WAKE_ON_PATTERN_MATCH_ENABLE 0x00000002
+#define NDIS_DEVICE_WAKE_ON_MAGIC_PACKET_ENABLE 0x00000004
+
+struct NDIS_PNP_CAPABILITIES {
+ u32 Flags;
+ struct NDIS_PM_WAKE_UP_CAPABILITIES WakeUpCapabilities;
+};
+
+struct NDIS_PM_PACKET_PATTERN {
+ u32 Priority;
+ u32 Reserved;
+ u32 MaskSize;
+ u32 PatternOffset;
+ u32 PatternSize;
+ u32 PatternFlags;
+};
+
+
+/* Required Object IDs (OIDs) */
+#define OID_GEN_SUPPORTED_LIST 0x00010101
+#define OID_GEN_HARDWARE_STATUS 0x00010102
+#define OID_GEN_MEDIA_SUPPORTED 0x00010103
+#define OID_GEN_MEDIA_IN_USE 0x00010104
+#define OID_GEN_MAXIMUM_LOOKAHEAD 0x00010105
+#define OID_GEN_MAXIMUM_FRAME_SIZE 0x00010106
+#define OID_GEN_LINK_SPEED 0x00010107
+#define OID_GEN_TRANSMIT_BUFFER_SPACE 0x00010108
+#define OID_GEN_RECEIVE_BUFFER_SPACE 0x00010109
+#define OID_GEN_TRANSMIT_BLOCK_SIZE 0x0001010A
+#define OID_GEN_RECEIVE_BLOCK_SIZE 0x0001010B
+#define OID_GEN_VENDOR_ID 0x0001010C
+#define OID_GEN_VENDOR_DESCRIPTION 0x0001010D
+#define OID_GEN_CURRENT_PACKET_FILTER 0x0001010E
+#define OID_GEN_CURRENT_LOOKAHEAD 0x0001010F
+#define OID_GEN_DRIVER_VERSION 0x00010110
+#define OID_GEN_MAXIMUM_TOTAL_SIZE 0x00010111
+#define OID_GEN_PROTOCOL_OPTIONS 0x00010112
+#define OID_GEN_MAC_OPTIONS 0x00010113
+#define OID_GEN_MEDIA_CONNECT_STATUS 0x00010114
+#define OID_GEN_MAXIMUM_SEND_PACKETS 0x00010115
+#define OID_GEN_VENDOR_DRIVER_VERSION 0x00010116
+#define OID_GEN_SUPPORTED_GUIDS 0x00010117
+#define OID_GEN_NETWORK_LAYER_ADDRESSES 0x00010118
+#define OID_GEN_TRANSPORT_HEADER_OFFSET 0x00010119
+#define OID_GEN_MACHINE_NAME 0x0001021A
+#define OID_GEN_RNDIS_CONFIG_PARAMETER 0x0001021B
+#define OID_GEN_VLAN_ID 0x0001021C
+
+/* Optional OIDs */
+#define OID_GEN_MEDIA_CAPABILITIES 0x00010201
+#define OID_GEN_PHYSICAL_MEDIUM 0x00010202
+
+/* Required statistics OIDs */
+#define OID_GEN_XMIT_OK 0x00020101
+#define OID_GEN_RCV_OK 0x00020102
+#define OID_GEN_XMIT_ERROR 0x00020103
+#define OID_GEN_RCV_ERROR 0x00020104
+#define OID_GEN_RCV_NO_BUFFER 0x00020105
+
+/* Optional statistics OIDs */
+#define OID_GEN_DIRECTED_BYTES_XMIT 0x00020201
+#define OID_GEN_DIRECTED_FRAMES_XMIT 0x00020202
+#define OID_GEN_MULTICAST_BYTES_XMIT 0x00020203
+#define OID_GEN_MULTICAST_FRAMES_XMIT 0x00020204
+#define OID_GEN_BROADCAST_BYTES_XMIT 0x00020205
+#define OID_GEN_BROADCAST_FRAMES_XMIT 0x00020206
+#define OID_GEN_DIRECTED_BYTES_RCV 0x00020207
+#define OID_GEN_DIRECTED_FRAMES_RCV 0x00020208
+#define OID_GEN_MULTICAST_BYTES_RCV 0x00020209
+#define OID_GEN_MULTICAST_FRAMES_RCV 0x0002020A
+#define OID_GEN_BROADCAST_BYTES_RCV 0x0002020B
+#define OID_GEN_BROADCAST_FRAMES_RCV 0x0002020C
+#define OID_GEN_RCV_CRC_ERROR 0x0002020D
+#define OID_GEN_TRANSMIT_QUEUE_LENGTH 0x0002020E
+#define OID_GEN_GET_TIME_CAPS 0x0002020F
+#define OID_GEN_GET_NETCARD_TIME 0x00020210
+#define OID_GEN_NETCARD_LOAD 0x00020211
+#define OID_GEN_DEVICE_PROFILE 0x00020212
+#define OID_GEN_INIT_TIME_MS 0x00020213
+#define OID_GEN_RESET_COUNTS 0x00020214
+#define OID_GEN_MEDIA_SENSE_COUNTS 0x00020215
+#define OID_GEN_FRIENDLY_NAME 0x00020216
+#define OID_GEN_MINIPORT_INFO 0x00020217
+#define OID_GEN_RESET_VERIFY_PARAMETERS 0x00020218
+
+/* IEEE 802.3 (Ethernet) OIDs */
+#define NDIS_802_3_MAC_OPTION_PRIORITY 0x00000001
+
+#define OID_802_3_PERMANENT_ADDRESS 0x01010101
+#define OID_802_3_CURRENT_ADDRESS 0x01010102
+#define OID_802_3_MULTICAST_LIST 0x01010103
+#define OID_802_3_MAXIMUM_LIST_SIZE 0x01010104
+#define OID_802_3_MAC_OPTIONS 0x01010105
+#define OID_802_3_RCV_ERROR_ALIGNMENT 0x01020101
+#define OID_802_3_XMIT_ONE_COLLISION 0x01020102
+#define OID_802_3_XMIT_MORE_COLLISIONS 0x01020103
+#define OID_802_3_XMIT_DEFERRED 0x01020201
+#define OID_802_3_XMIT_MAX_COLLISIONS 0x01020202
+#define OID_802_3_RCV_OVERRUN 0x01020203
+#define OID_802_3_XMIT_UNDERRUN 0x01020204
+#define OID_802_3_XMIT_HEARTBEAT_FAILURE 0x01020205
+#define OID_802_3_XMIT_TIMES_CRS_LOST 0x01020206
+#define OID_802_3_XMIT_LATE_COLLISIONS 0x01020207
+
+/* OID_GEN_MINIPORT_INFO constants */
+#define NDIS_MINIPORT_BUS_MASTER 0x00000001
+#define NDIS_MINIPORT_WDM_DRIVER 0x00000002
+#define NDIS_MINIPORT_SG_LIST 0x00000004
+#define NDIS_MINIPORT_SUPPORTS_MEDIA_QUERY 0x00000008
+#define NDIS_MINIPORT_INDICATES_PACKETS 0x00000010
+#define NDIS_MINIPORT_IGNORE_PACKET_QUEUE 0x00000020
+#define NDIS_MINIPORT_IGNORE_REQUEST_QUEUE 0x00000040
+#define NDIS_MINIPORT_IGNORE_TOKEN_RING_ERRORS 0x00000080
+#define NDIS_MINIPORT_INTERMEDIATE_DRIVER 0x00000100
+#define NDIS_MINIPORT_IS_NDIS_5 0x00000200
+#define NDIS_MINIPORT_IS_CO 0x00000400
+#define NDIS_MINIPORT_DESERIALIZE 0x00000800
+#define NDIS_MINIPORT_REQUIRES_MEDIA_POLLING 0x00001000
+#define NDIS_MINIPORT_SUPPORTS_MEDIA_SENSE 0x00002000
+#define NDIS_MINIPORT_NETBOOT_CARD 0x00004000
+#define NDIS_MINIPORT_PM_SUPPORTED 0x00008000
+#define NDIS_MINIPORT_SUPPORTS_MAC_ADDRESS_OVERWRITE 0x00010000
+#define NDIS_MINIPORT_USES_SAFE_BUFFER_APIS 0x00020000
+#define NDIS_MINIPORT_HIDDEN 0x00040000
+#define NDIS_MINIPORT_SWENUM 0x00080000
+#define NDIS_MINIPORT_SURPRISE_REMOVE_OK 0x00100000
+#define NDIS_MINIPORT_NO_HALT_ON_SUSPEND 0x00200000
+#define NDIS_MINIPORT_HARDWARE_DEVICE 0x00400000
+#define NDIS_MINIPORT_SUPPORTS_CANCEL_SEND_PACKETS 0x00800000
+#define NDIS_MINIPORT_64BITS_DMA 0x01000000
+
+#define NDIS_MEDIUM_802_3 0x00000000
+#define NDIS_MEDIUM_802_5 0x00000001
+#define NDIS_MEDIUM_FDDI 0x00000002
+#define NDIS_MEDIUM_WAN 0x00000003
+#define NDIS_MEDIUM_LOCAL_TALK 0x00000004
+#define NDIS_MEDIUM_DIX 0x00000005
+#define NDIS_MEDIUM_ARCENT_RAW 0x00000006
+#define NDIS_MEDIUM_ARCENT_878_2 0x00000007
+#define NDIS_MEDIUM_ATM 0x00000008
+#define NDIS_MEDIUM_WIRELESS_LAN 0x00000009
+#define NDIS_MEDIUM_IRDA 0x0000000A
+#define NDIS_MEDIUM_BPC 0x0000000B
+#define NDIS_MEDIUM_CO_WAN 0x0000000C
+#define NDIS_MEDIUM_1394 0x0000000D
+
+#define NDIS_PACKET_TYPE_DIRECTED 0x00000001
+#define NDIS_PACKET_TYPE_MULTICAST 0x00000002
+#define NDIS_PACKET_TYPE_ALL_MULTICAST 0x00000004
+#define NDIS_PACKET_TYPE_BROADCAST 0x00000008
+#define NDIS_PACKET_TYPE_SOURCE_ROUTING 0x00000010
+#define NDIS_PACKET_TYPE_PROMISCUOUS 0x00000020
+#define NDIS_PACKET_TYPE_SMT 0x00000040
+#define NDIS_PACKET_TYPE_ALL_LOCAL 0x00000080
+#define NDIS_PACKET_TYPE_GROUP 0x00000100
+#define NDIS_PACKET_TYPE_ALL_FUNCTIONAL 0x00000200
+#define NDIS_PACKET_TYPE_FUNCTIONAL 0x00000400
+#define NDIS_PACKET_TYPE_MAC_FRAME 0x00000800
+
+#define NDIS_MEDIA_STATE_CONNECTED 0x00000000
+#define NDIS_MEDIA_STATE_DISCONNECTED 0x00000001
+
+#define NDIS_MAC_OPTION_COPY_LOOKAHEAD_DATA 0x00000001
+#define NDIS_MAC_OPTION_RECEIVE_SERIALIZED 0x00000002
+#define NDIS_MAC_OPTION_TRANSFERS_NOT_PEND 0x00000004
+#define NDIS_MAC_OPTION_NO_LOOPBACK 0x00000008
+#define NDIS_MAC_OPTION_FULL_DUPLEX 0x00000010
+#define NDIS_MAC_OPTION_EOTX_INDICATION 0x00000020
+#define NDIS_MAC_OPTION_8021P_PRIORITY 0x00000040
+#define NDIS_MAC_OPTION_RESERVED 0x80000000
+
+#endif /* _LINUX_NDIS_H */
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
new file mode 100644
index 00000000000..e5457f2026c
--- /dev/null
+++ b/drivers/usb/gadget/net2280.c
@@ -0,0 +1,2967 @@
+/*
+ * Driver for the PLX NET2280 USB device controller.
+ * Specs and errata are available from <http://www.plxtech.com>.
+ *
+ * PLX Technology Inc. (formerly NetChip Technology) supported the
+ * development of this driver.
+ *
+ *
+ * CODE STATUS HIGHLIGHTS
+ *
+ * This driver should work well with most "gadget" drivers, including
+ * the File Storage, Serial, and Ethernet/RNDIS gadget drivers
+ * as well as Gadget Zero and Gadgetfs.
+ *
+ * DMA is enabled by default. Drivers using transfer queues might use
+ * DMA chaining to remove IRQ latencies between transfers. (Except when
+ * short OUT transfers happen.) Drivers can use the req->no_interrupt
+ * hint to completely eliminate some IRQs, if a later IRQ is guaranteed
+ * and DMA chaining is enabled.
+ *
+ * Note that almost all the errata workarounds here are only needed for
+ * rev1 chips. Rev1a silicon (0110) fixes almost all of them.
+ */
+
+/*
+ * Copyright (C) 2003 David Brownell
+ * Copyright (C) 2003-2005 PLX Technology, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#undef DEBUG /* messages on error and most fault paths */
+#undef VERBOSE /* extra debug messages (success too) */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/usb_ch9.h>
+#include <linux/usb_gadget.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/unaligned.h>
+
+
+#define DRIVER_DESC "PLX NET2280 USB Peripheral Controller"
+#define DRIVER_VERSION "2005 Feb 03"
+
+#define DMA_ADDR_INVALID (~(dma_addr_t)0)
+#define EP_DONTUSE 13 /* nonzero */
+
+#define USE_RDK_LEDS /* GPIO pins control three LEDs */
+
+
+static const char driver_name [] = "net2280";
+static const char driver_desc [] = DRIVER_DESC;
+
+static const char ep0name [] = "ep0";
+static const char *ep_name [] = {
+ ep0name,
+ "ep-a", "ep-b", "ep-c", "ep-d",
+ "ep-e", "ep-f",
+};
+
+/* use_dma -- general goodness, fewer interrupts, less cpu load (vs PIO)
+ * use_dma_chaining -- dma descriptor queueing gives even more irq reduction
+ *
+ * The net2280 DMA engines are not tightly integrated with their FIFOs;
+ * not all cases are (yet) handled well in this driver or the silicon.
+ * Some gadget drivers work better with the dma support here than others.
+ * These two parameters let you use PIO or more aggressive DMA.
+ */
+static int use_dma = 1;
+static int use_dma_chaining = 0;
+
+/* "modprobe net2280 use_dma=n" etc */
+module_param (use_dma, bool, S_IRUGO);
+module_param (use_dma_chaining, bool, S_IRUGO);
+
+
+/* mode 0 == ep-{a,b,c,d} 1K fifo each
+ * mode 1 == ep-{a,b} 2K fifo each, ep-{c,d} unavailable
+ * mode 2 == ep-a 2K fifo, ep-{b,c} 1K each, ep-d unavailable
+ */
+static ushort fifo_mode = 0;
+
+/* "modprobe net2280 fifo_mode=1" etc */
+module_param (fifo_mode, ushort, 0644);
+
+/* enable_suspend -- When enabled, the driver will respond to
+ * USB suspend requests by powering down the NET2280. Otherwise,
+ * USB suspend requests will be ignored. This is acceptible for
+ * self-powered devices, and helps avoid some quirks.
+ */
+static int enable_suspend = 0;
+
+/* "modprobe net2280 enable_suspend=1" etc */
+module_param (enable_suspend, bool, S_IRUGO);
+
+
+#define DIR_STRING(bAddress) (((bAddress) & USB_DIR_IN) ? "in" : "out")
+
+#if defined(CONFIG_USB_GADGET_DEBUG_FILES) || defined (DEBUG)
+static char *type_string (u8 bmAttributes)
+{
+ switch ((bmAttributes) & USB_ENDPOINT_XFERTYPE_MASK) {
+ case USB_ENDPOINT_XFER_BULK: return "bulk";
+ case USB_ENDPOINT_XFER_ISOC: return "iso";
+ case USB_ENDPOINT_XFER_INT: return "intr";
+ };
+ return "control";
+}
+#endif
+
+#include "net2280.h"
+
+#define valid_bit __constant_cpu_to_le32 (1 << VALID_BIT)
+#define dma_done_ie __constant_cpu_to_le32 (1 << DMA_DONE_INTERRUPT_ENABLE)
+
+/*-------------------------------------------------------------------------*/
+
+static int
+net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
+{
+ struct net2280 *dev;
+ struct net2280_ep *ep;
+ u32 max, tmp;
+ unsigned long flags;
+
+ ep = container_of (_ep, struct net2280_ep, ep);
+ if (!_ep || !desc || ep->desc || _ep->name == ep0name
+ || desc->bDescriptorType != USB_DT_ENDPOINT)
+ return -EINVAL;
+ dev = ep->dev;
+ if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
+ return -ESHUTDOWN;
+
+ /* erratum 0119 workaround ties up an endpoint number */
+ if ((desc->bEndpointAddress & 0x0f) == EP_DONTUSE)
+ return -EDOM;
+
+ /* sanity check ep-e/ep-f since their fifos are small */
+ max = le16_to_cpu (desc->wMaxPacketSize) & 0x1fff;
+ if (ep->num > 4 && max > 64)
+ return -ERANGE;
+
+ spin_lock_irqsave (&dev->lock, flags);
+ _ep->maxpacket = max & 0x7ff;
+ ep->desc = desc;
+
+ /* ep_reset() has already been called */
+ ep->stopped = 0;
+ ep->out_overflow = 0;
+
+ /* set speed-dependent max packet; may kick in high bandwidth */
+ set_idx_reg (dev->regs, REG_EP_MAXPKT (dev, ep->num), max);
+
+ /* FIFO lines can't go to different packets. PIO is ok, so
+ * use it instead of troublesome (non-bulk) multi-packet DMA.
+ */
+ if (ep->dma && (max % 4) != 0 && use_dma_chaining) {
+ DEBUG (ep->dev, "%s, no dma for maxpacket %d\n",
+ ep->ep.name, ep->ep.maxpacket);
+ ep->dma = NULL;
+ }
+
+ /* set type, direction, address; reset fifo counters */
+ writel ((1 << FIFO_FLUSH), &ep->regs->ep_stat);
+ tmp = (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK);
+ if (tmp == USB_ENDPOINT_XFER_INT) {
+ /* erratum 0105 workaround prevents hs NYET */
+ if (dev->chiprev == 0100
+ && dev->gadget.speed == USB_SPEED_HIGH
+ && !(desc->bEndpointAddress & USB_DIR_IN))
+ writel ((1 << CLEAR_NAK_OUT_PACKETS_MODE),
+ &ep->regs->ep_rsp);
+ } else if (tmp == USB_ENDPOINT_XFER_BULK) {
+ /* catch some particularly blatant driver bugs */
+ if ((dev->gadget.speed == USB_SPEED_HIGH
+ && max != 512)
+ || (dev->gadget.speed == USB_SPEED_FULL
+ && max > 64)) {
+ spin_unlock_irqrestore (&dev->lock, flags);
+ return -ERANGE;
+ }
+ }
+ ep->is_iso = (tmp == USB_ENDPOINT_XFER_ISOC) ? 1 : 0;
+ tmp <<= ENDPOINT_TYPE;
+ tmp |= desc->bEndpointAddress;
+ tmp |= (4 << ENDPOINT_BYTE_COUNT); /* default full fifo lines */
+ tmp |= 1 << ENDPOINT_ENABLE;
+ wmb ();
+
+ /* for OUT transfers, block the rx fifo until a read is posted */
+ ep->is_in = (tmp & USB_DIR_IN) != 0;
+ if (!ep->is_in)
+ writel ((1 << SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp);
+
+ writel (tmp, &ep->regs->ep_cfg);
+
+ /* enable irqs */
+ if (!ep->dma) { /* pio, per-packet */
+ tmp = (1 << ep->num) | readl (&dev->regs->pciirqenb0);
+ writel (tmp, &dev->regs->pciirqenb0);
+
+ tmp = (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE)
+ | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE)
+ | readl (&ep->regs->ep_irqenb);
+ writel (tmp, &ep->regs->ep_irqenb);
+ } else { /* dma, per-request */
+ tmp = (1 << (8 + ep->num)); /* completion */
+ tmp |= readl (&dev->regs->pciirqenb1);
+ writel (tmp, &dev->regs->pciirqenb1);
+
+ /* for short OUT transfers, dma completions can't
+ * advance the queue; do it pio-style, by hand.
+ * NOTE erratum 0112 workaround #2
+ */
+ if ((desc->bEndpointAddress & USB_DIR_IN) == 0) {
+ tmp = (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE);
+ writel (tmp, &ep->regs->ep_irqenb);
+
+ tmp = (1 << ep->num) | readl (&dev->regs->pciirqenb0);
+ writel (tmp, &dev->regs->pciirqenb0);
+ }
+ }
+
+ tmp = desc->bEndpointAddress;
+ DEBUG (dev, "enabled %s (ep%d%s-%s) %s max %04x\n",
+ _ep->name, tmp & 0x0f, DIR_STRING (tmp),
+ type_string (desc->bmAttributes),
+ ep->dma ? "dma" : "pio", max);
+
+ /* pci writes may still be posted */
+ spin_unlock_irqrestore (&dev->lock, flags);
+ return 0;
+}
+
+static int handshake (u32 __iomem *ptr, u32 mask, u32 done, int usec)
+{
+ u32 result;
+
+ do {
+ result = readl (ptr);
+ if (result == ~(u32)0) /* "device unplugged" */
+ return -ENODEV;
+ result &= mask;
+ if (result == done)
+ return 0;
+ udelay (1);
+ usec--;
+ } while (usec > 0);
+ return -ETIMEDOUT;
+}
+
+static struct usb_ep_ops net2280_ep_ops;
+
+static void ep_reset (struct net2280_regs __iomem *regs, struct net2280_ep *ep)
+{
+ u32 tmp;
+
+ ep->desc = NULL;
+ INIT_LIST_HEAD (&ep->queue);
+
+ ep->ep.maxpacket = ~0;
+ ep->ep.ops = &net2280_ep_ops;
+
+ /* disable the dma, irqs, endpoint... */
+ if (ep->dma) {
+ writel (0, &ep->dma->dmactl);
+ writel ( (1 << DMA_SCATTER_GATHER_DONE_INTERRUPT)
+ | (1 << DMA_TRANSACTION_DONE_INTERRUPT)
+ | (1 << DMA_ABORT)
+ , &ep->dma->dmastat);
+
+ tmp = readl (&regs->pciirqenb0);
+ tmp &= ~(1 << ep->num);
+ writel (tmp, &regs->pciirqenb0);
+ } else {
+ tmp = readl (&regs->pciirqenb1);
+ tmp &= ~(1 << (8 + ep->num)); /* completion */
+ writel (tmp, &regs->pciirqenb1);
+ }
+ writel (0, &ep->regs->ep_irqenb);
+
+ /* init to our chosen defaults, notably so that we NAK OUT
+ * packets until the driver queues a read (+note erratum 0112)
+ */
+ tmp = (1 << SET_NAK_OUT_PACKETS_MODE)
+ | (1 << SET_NAK_OUT_PACKETS)
+ | (1 << CLEAR_EP_HIDE_STATUS_PHASE)
+ | (1 << CLEAR_INTERRUPT_MODE);
+
+ if (ep->num != 0) {
+ tmp |= (1 << CLEAR_ENDPOINT_TOGGLE)
+ | (1 << CLEAR_ENDPOINT_HALT);
+ }
+ writel (tmp, &ep->regs->ep_rsp);
+
+ /* scrub most status bits, and flush any fifo state */
+ writel ( (1 << TIMEOUT)
+ | (1 << USB_STALL_SENT)
+ | (1 << USB_IN_NAK_SENT)
+ | (1 << USB_IN_ACK_RCVD)
+ | (1 << USB_OUT_PING_NAK_SENT)
+ | (1 << USB_OUT_ACK_SENT)
+ | (1 << FIFO_OVERFLOW)
+ | (1 << FIFO_UNDERFLOW)
+ | (1 << FIFO_FLUSH)
+ | (1 << SHORT_PACKET_OUT_DONE_INTERRUPT)
+ | (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)
+ | (1 << DATA_PACKET_RECEIVED_INTERRUPT)
+ | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT)
+ | (1 << DATA_OUT_PING_TOKEN_INTERRUPT)
+ | (1 << DATA_IN_TOKEN_INTERRUPT)
+ , &ep->regs->ep_stat);
+
+ /* fifo size is handled separately */
+}
+
+static void nuke (struct net2280_ep *);
+
+static int net2280_disable (struct usb_ep *_ep)
+{
+ struct net2280_ep *ep;
+ unsigned long flags;
+
+ ep = container_of (_ep, struct net2280_ep, ep);
+ if (!_ep || !ep->desc || _ep->name == ep0name)
+ return -EINVAL;
+
+ spin_lock_irqsave (&ep->dev->lock, flags);
+ nuke (ep);
+ ep_reset (ep->dev->regs, ep);
+
+ VDEBUG (ep->dev, "disabled %s %s\n",
+ ep->dma ? "dma" : "pio", _ep->name);
+
+ /* synch memory views with the device */
+ (void) readl (&ep->regs->ep_cfg);
+
+ if (use_dma && !ep->dma && ep->num >= 1 && ep->num <= 4)
+ ep->dma = &ep->dev->dma [ep->num - 1];
+
+ spin_unlock_irqrestore (&ep->dev->lock, flags);
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_request *
+net2280_alloc_request (struct usb_ep *_ep, int gfp_flags)
+{
+ struct net2280_ep *ep;
+ struct net2280_request *req;
+
+ if (!_ep)
+ return NULL;
+ ep = container_of (_ep, struct net2280_ep, ep);
+
+ req = kmalloc (sizeof *req, gfp_flags);
+ if (!req)
+ return NULL;
+
+ memset (req, 0, sizeof *req);
+ req->req.dma = DMA_ADDR_INVALID;
+ INIT_LIST_HEAD (&req->queue);
+
+ /* this dma descriptor may be swapped with the previous dummy */
+ if (ep->dma) {
+ struct net2280_dma *td;
+
+ td = pci_pool_alloc (ep->dev->requests, gfp_flags,
+ &req->td_dma);
+ if (!td) {
+ kfree (req);
+ return NULL;
+ }
+ td->dmacount = 0; /* not VALID */
+ td->dmaaddr = __constant_cpu_to_le32 (DMA_ADDR_INVALID);
+ td->dmadesc = td->dmaaddr;
+ req->td = td;
+ }
+ return &req->req;
+}
+
+static void
+net2280_free_request (struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct net2280_ep *ep;
+ struct net2280_request *req;
+
+ ep = container_of (_ep, struct net2280_ep, ep);
+ if (!_ep || !_req)
+ return;
+
+ req = container_of (_req, struct net2280_request, req);
+ WARN_ON (!list_empty (&req->queue));
+ if (req->td)
+ pci_pool_free (ep->dev->requests, req->td, req->td_dma);
+ kfree (req);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#undef USE_KMALLOC
+
+/* many common platforms have dma-coherent caches, which means that it's
+ * safe to use kmalloc() memory for all i/o buffers without using any
+ * cache flushing calls. (unless you're trying to share cache lines
+ * between dma and non-dma activities, which is a slow idea in any case.)
+ *
+ * other platforms need more care, with 2.5 having a moderately general
+ * solution (which falls down for allocations smaller than one page)
+ * that improves significantly on the 2.4 PCI allocators by removing
+ * the restriction that memory never be freed in_interrupt().
+ */
+#if defined(CONFIG_X86)
+#define USE_KMALLOC
+
+#elif defined(CONFIG_PPC) && !defined(CONFIG_NOT_COHERENT_CACHE)
+#define USE_KMALLOC
+
+#elif defined(CONFIG_MIPS) && !defined(CONFIG_NONCOHERENT_IO)
+#define USE_KMALLOC
+
+/* FIXME there are other cases, including an x86-64 one ... */
+#endif
+
+/* allocating buffers this way eliminates dma mapping overhead, which
+ * on some platforms will mean eliminating a per-io buffer copy. with
+ * some kinds of system caches, further tweaks may still be needed.
+ */
+static void *
+net2280_alloc_buffer (
+ struct usb_ep *_ep,
+ unsigned bytes,
+ dma_addr_t *dma,
+ int gfp_flags
+)
+{
+ void *retval;
+ struct net2280_ep *ep;
+
+ ep = container_of (_ep, struct net2280_ep, ep);
+ if (!_ep)
+ return NULL;
+ *dma = DMA_ADDR_INVALID;
+
+#if defined(USE_KMALLOC)
+ retval = kmalloc(bytes, gfp_flags);
+ if (retval)
+ *dma = virt_to_phys(retval);
+#else
+ if (ep->dma) {
+ /* the main problem with this call is that it wastes memory
+ * on typical 1/N page allocations: it allocates 1-N pages.
+ */
+#warning Using dma_alloc_coherent even with buffers smaller than a page.
+ retval = dma_alloc_coherent(&ep->dev->pdev->dev,
+ bytes, dma, gfp_flags);
+ } else
+ retval = kmalloc(bytes, gfp_flags);
+#endif
+ return retval;
+}
+
+static void
+net2280_free_buffer (
+ struct usb_ep *_ep,
+ void *buf,
+ dma_addr_t dma,
+ unsigned bytes
+) {
+ /* free memory into the right allocator */
+#ifndef USE_KMALLOC
+ if (dma != DMA_ADDR_INVALID) {
+ struct net2280_ep *ep;
+
+ ep = container_of(_ep, struct net2280_ep, ep);
+ if (!_ep)
+ return;
+ dma_free_coherent(&ep->dev->pdev->dev, bytes, buf, dma);
+ } else
+#endif
+ kfree (buf);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* load a packet into the fifo we use for usb IN transfers.
+ * works for all endpoints.
+ *
+ * NOTE: pio with ep-a..ep-d could stuff multiple packets into the fifo
+ * at a time, but this code is simpler because it knows it only writes
+ * one packet. ep-a..ep-d should use dma instead.
+ */
+static void
+write_fifo (struct net2280_ep *ep, struct usb_request *req)
+{
+ struct net2280_ep_regs __iomem *regs = ep->regs;
+ u8 *buf;
+ u32 tmp;
+ unsigned count, total;
+
+ /* INVARIANT: fifo is currently empty. (testable) */
+
+ if (req) {
+ buf = req->buf + req->actual;
+ prefetch (buf);
+ total = req->length - req->actual;
+ } else {
+ total = 0;
+ buf = NULL;
+ }
+
+ /* write just one packet at a time */
+ count = ep->ep.maxpacket;
+ if (count > total) /* min() cannot be used on a bitfield */
+ count = total;
+
+ VDEBUG (ep->dev, "write %s fifo (IN) %d bytes%s req %p\n",
+ ep->ep.name, count,
+ (count != ep->ep.maxpacket) ? " (short)" : "",
+ req);
+ while (count >= 4) {
+ /* NOTE be careful if you try to align these. fifo lines
+ * should normally be full (4 bytes) and successive partial
+ * lines are ok only in certain cases.
+ */
+ tmp = get_unaligned ((u32 *)buf);
+ cpu_to_le32s (&tmp);
+ writel (tmp, &regs->ep_data);
+ buf += 4;
+ count -= 4;
+ }
+
+ /* last fifo entry is "short" unless we wrote a full packet.
+ * also explicitly validate last word in (periodic) transfers
+ * when maxpacket is not a multiple of 4 bytes.
+ */
+ if (count || total < ep->ep.maxpacket) {
+ tmp = count ? get_unaligned ((u32 *)buf) : count;
+ cpu_to_le32s (&tmp);
+ set_fifo_bytecount (ep, count & 0x03);
+ writel (tmp, &regs->ep_data);
+ }
+
+ /* pci writes may still be posted */
+}
+
+/* work around erratum 0106: PCI and USB race over the OUT fifo.
+ * caller guarantees chiprev 0100, out endpoint is NAKing, and
+ * there's no real data in the fifo.
+ *
+ * NOTE: also used in cases where that erratum doesn't apply:
+ * where the host wrote "too much" data to us.
+ */
+static void out_flush (struct net2280_ep *ep)
+{
+ u32 __iomem *statp;
+ u32 tmp;
+
+ ASSERT_OUT_NAKING (ep);
+
+ statp = &ep->regs->ep_stat;
+ writel ( (1 << DATA_OUT_PING_TOKEN_INTERRUPT)
+ | (1 << DATA_PACKET_RECEIVED_INTERRUPT)
+ , statp);
+ writel ((1 << FIFO_FLUSH), statp);
+ mb ();
+ tmp = readl (statp);
+ if (tmp & (1 << DATA_OUT_PING_TOKEN_INTERRUPT)
+ /* high speed did bulk NYET; fifo isn't filling */
+ && ep->dev->gadget.speed == USB_SPEED_FULL) {
+ unsigned usec;
+
+ usec = 50; /* 64 byte bulk/interrupt */
+ handshake (statp, (1 << USB_OUT_PING_NAK_SENT),
+ (1 << USB_OUT_PING_NAK_SENT), usec);
+ /* NAK done; now CLEAR_NAK_OUT_PACKETS is safe */
+ }
+}
+
+/* unload packet(s) from the fifo we use for usb OUT transfers.
+ * returns true iff the request completed, because of short packet
+ * or the request buffer having filled with full packets.
+ *
+ * for ep-a..ep-d this will read multiple packets out when they
+ * have been accepted.
+ */
+static int
+read_fifo (struct net2280_ep *ep, struct net2280_request *req)
+{
+ struct net2280_ep_regs __iomem *regs = ep->regs;
+ u8 *buf = req->req.buf + req->req.actual;
+ unsigned count, tmp, is_short;
+ unsigned cleanup = 0, prevent = 0;
+
+ /* erratum 0106 ... packets coming in during fifo reads might
+ * be incompletely rejected. not all cases have workarounds.
+ */
+ if (ep->dev->chiprev == 0x0100
+ && ep->dev->gadget.speed == USB_SPEED_FULL) {
+ udelay (1);
+ tmp = readl (&ep->regs->ep_stat);
+ if ((tmp & (1 << NAK_OUT_PACKETS)))
+ cleanup = 1;
+ else if ((tmp & (1 << FIFO_FULL))) {
+ start_out_naking (ep);
+ prevent = 1;
+ }
+ /* else: hope we don't see the problem */
+ }
+
+ /* never overflow the rx buffer. the fifo reads packets until
+ * it sees a short one; we might not be ready for them all.
+ */
+ prefetchw (buf);
+ count = readl (&regs->ep_avail);
+ if (unlikely (count == 0)) {
+ udelay (1);
+ tmp = readl (&ep->regs->ep_stat);
+ count = readl (&regs->ep_avail);
+ /* handled that data already? */
+ if (count == 0 && (tmp & (1 << NAK_OUT_PACKETS)) == 0)
+ return 0;
+ }
+
+ tmp = req->req.length - req->req.actual;
+ if (count > tmp) {
+ /* as with DMA, data overflow gets flushed */
+ if ((tmp % ep->ep.maxpacket) != 0) {
+ ERROR (ep->dev,
+ "%s out fifo %d bytes, expected %d\n",
+ ep->ep.name, count, tmp);
+ req->req.status = -EOVERFLOW;
+ cleanup = 1;
+ /* NAK_OUT_PACKETS will be set, so flushing is safe;
+ * the next read will start with the next packet
+ */
+ } /* else it's a ZLP, no worries */
+ count = tmp;
+ }
+ req->req.actual += count;
+
+ is_short = (count == 0) || ((count % ep->ep.maxpacket) != 0);
+
+ VDEBUG (ep->dev, "read %s fifo (OUT) %d bytes%s%s%s req %p %d/%d\n",
+ ep->ep.name, count, is_short ? " (short)" : "",
+ cleanup ? " flush" : "", prevent ? " nak" : "",
+ req, req->req.actual, req->req.length);
+
+ while (count >= 4) {
+ tmp = readl (&regs->ep_data);
+ cpu_to_le32s (&tmp);
+ put_unaligned (tmp, (u32 *)buf);
+ buf += 4;
+ count -= 4;
+ }
+ if (count) {
+ tmp = readl (&regs->ep_data);
+ /* LE conversion is implicit here: */
+ do {
+ *buf++ = (u8) tmp;
+ tmp >>= 8;
+ } while (--count);
+ }
+ if (cleanup)
+ out_flush (ep);
+ if (prevent) {
+ writel ((1 << CLEAR_NAK_OUT_PACKETS), &ep->regs->ep_rsp);
+ (void) readl (&ep->regs->ep_rsp);
+ }
+
+ return is_short || ((req->req.actual == req->req.length)
+ && !req->req.zero);
+}
+
+/* fill out dma descriptor to match a given request */
+static void
+fill_dma_desc (struct net2280_ep *ep, struct net2280_request *req, int valid)
+{
+ struct net2280_dma *td = req->td;
+ u32 dmacount = req->req.length;
+
+ /* don't let DMA continue after a short OUT packet,
+ * so overruns can't affect the next transfer.
+ * in case of overruns on max-size packets, we can't
+ * stop the fifo from filling but we can flush it.
+ */
+ if (ep->is_in)
+ dmacount |= (1 << DMA_DIRECTION);
+ else if ((dmacount % ep->ep.maxpacket) != 0)
+ dmacount |= (1 << END_OF_CHAIN);
+
+ req->valid = valid;
+ if (valid)
+ dmacount |= (1 << VALID_BIT);
+ if (likely(!req->req.no_interrupt || !use_dma_chaining))
+ dmacount |= (1 << DMA_DONE_INTERRUPT_ENABLE);
+
+ /* td->dmadesc = previously set by caller */
+ td->dmaaddr = cpu_to_le32 (req->req.dma);
+
+ /* 2280 may be polling VALID_BIT through ep->dma->dmadesc */
+ wmb ();
+ td->dmacount = cpu_to_le32p (&dmacount);
+}
+
+static const u32 dmactl_default =
+ (1 << DMA_SCATTER_GATHER_DONE_INTERRUPT)
+ | (1 << DMA_CLEAR_COUNT_ENABLE)
+ /* erratum 0116 workaround part 1 (use POLLING) */
+ | (POLL_100_USEC << DESCRIPTOR_POLLING_RATE)
+ | (1 << DMA_VALID_BIT_POLLING_ENABLE)
+ | (1 << DMA_VALID_BIT_ENABLE)
+ | (1 << DMA_SCATTER_GATHER_ENABLE)
+ /* erratum 0116 workaround part 2 (no AUTOSTART) */
+ | (1 << DMA_ENABLE);
+
+static inline void spin_stop_dma (struct net2280_dma_regs __iomem *dma)
+{
+ handshake (&dma->dmactl, (1 << DMA_ENABLE), 0, 50);
+}
+
+static inline void stop_dma (struct net2280_dma_regs __iomem *dma)
+{
+ writel (readl (&dma->dmactl) & ~(1 << DMA_ENABLE), &dma->dmactl);
+ spin_stop_dma (dma);
+}
+
+static void start_queue (struct net2280_ep *ep, u32 dmactl, u32 td_dma)
+{
+ struct net2280_dma_regs __iomem *dma = ep->dma;
+
+ writel ((1 << VALID_BIT) | (ep->is_in << DMA_DIRECTION),
+ &dma->dmacount);
+ writel (readl (&dma->dmastat), &dma->dmastat);
+
+ writel (td_dma, &dma->dmadesc);
+ writel (dmactl, &dma->dmactl);
+
+ /* erratum 0116 workaround part 3: pci arbiter away from net2280 */
+ (void) readl (&ep->dev->pci->pcimstctl);
+
+ writel ((1 << DMA_START), &dma->dmastat);
+
+ if (!ep->is_in)
+ stop_out_naking (ep);
+}
+
+static void start_dma (struct net2280_ep *ep, struct net2280_request *req)
+{
+ u32 tmp;
+ struct net2280_dma_regs __iomem *dma = ep->dma;
+
+ /* FIXME can't use DMA for ZLPs */
+
+ /* on this path we "know" there's no dma active (yet) */
+ WARN_ON (readl (&dma->dmactl) & (1 << DMA_ENABLE));
+ writel (0, &ep->dma->dmactl);
+
+ /* previous OUT packet might have been short */
+ if (!ep->is_in && ((tmp = readl (&ep->regs->ep_stat))
+ & (1 << NAK_OUT_PACKETS)) != 0) {
+ writel ((1 << SHORT_PACKET_TRANSFERRED_INTERRUPT),
+ &ep->regs->ep_stat);
+
+ tmp = readl (&ep->regs->ep_avail);
+ if (tmp) {
+ writel (readl (&dma->dmastat), &dma->dmastat);
+
+ /* transfer all/some fifo data */
+ writel (req->req.dma, &dma->dmaaddr);
+ tmp = min (tmp, req->req.length);
+
+ /* dma irq, faking scatterlist status */
+ req->td->dmacount = cpu_to_le32 (req->req.length - tmp);
+ writel ((1 << DMA_DONE_INTERRUPT_ENABLE)
+ | tmp, &dma->dmacount);
+ req->td->dmadesc = 0;
+ req->valid = 1;
+
+ writel ((1 << DMA_ENABLE), &dma->dmactl);
+ writel ((1 << DMA_START), &dma->dmastat);
+ return;
+ }
+ }
+
+ tmp = dmactl_default;
+
+ /* force packet boundaries between dma requests, but prevent the
+ * controller from automagically writing a last "short" packet
+ * (zero length) unless the driver explicitly said to do that.
+ */
+ if (ep->is_in) {
+ if (likely ((req->req.length % ep->ep.maxpacket) != 0
+ || req->req.zero)) {
+ tmp |= (1 << DMA_FIFO_VALIDATE);
+ ep->in_fifo_validate = 1;
+ } else
+ ep->in_fifo_validate = 0;
+ }
+
+ /* init req->td, pointing to the current dummy */
+ req->td->dmadesc = cpu_to_le32 (ep->td_dma);
+ fill_dma_desc (ep, req, 1);
+
+ if (!use_dma_chaining)
+ req->td->dmacount |= __constant_cpu_to_le32 (1 << END_OF_CHAIN);
+
+ start_queue (ep, tmp, req->td_dma);
+}
+
+static inline void
+queue_dma (struct net2280_ep *ep, struct net2280_request *req, int valid)
+{
+ struct net2280_dma *end;
+ dma_addr_t tmp;
+
+ /* swap new dummy for old, link; fill and maybe activate */
+ end = ep->dummy;
+ ep->dummy = req->td;
+ req->td = end;
+
+ tmp = ep->td_dma;
+ ep->td_dma = req->td_dma;
+ req->td_dma = tmp;
+
+ end->dmadesc = cpu_to_le32 (ep->td_dma);
+
+ fill_dma_desc (ep, req, valid);
+}
+
+static void
+done (struct net2280_ep *ep, struct net2280_request *req, int status)
+{
+ struct net2280 *dev;
+ unsigned stopped = ep->stopped;
+
+ list_del_init (&req->queue);
+
+ if (req->req.status == -EINPROGRESS)
+ req->req.status = status;
+ else
+ status = req->req.status;
+
+ dev = ep->dev;
+ if (req->mapped) {
+ pci_unmap_single (dev->pdev, req->req.dma, req->req.length,
+ ep->is_in ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
+ req->req.dma = DMA_ADDR_INVALID;
+ req->mapped = 0;
+ }
+
+ if (status && status != -ESHUTDOWN)
+ VDEBUG (dev, "complete %s req %p stat %d len %u/%u\n",
+ ep->ep.name, &req->req, status,
+ req->req.actual, req->req.length);
+
+ /* don't modify queue heads during completion callback */
+ ep->stopped = 1;
+ spin_unlock (&dev->lock);
+ req->req.complete (&ep->ep, &req->req);
+ spin_lock (&dev->lock);
+ ep->stopped = stopped;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int
+net2280_queue (struct usb_ep *_ep, struct usb_request *_req, int gfp_flags)
+{
+ struct net2280_request *req;
+ struct net2280_ep *ep;
+ struct net2280 *dev;
+ unsigned long flags;
+
+ /* we always require a cpu-view buffer, so that we can
+ * always use pio (as fallback or whatever).
+ */
+ req = container_of (_req, struct net2280_request, req);
+ if (!_req || !_req->complete || !_req->buf
+ || !list_empty (&req->queue))
+ return -EINVAL;
+ if (_req->length > (~0 & DMA_BYTE_COUNT_MASK))
+ return -EDOM;
+ ep = container_of (_ep, struct net2280_ep, ep);
+ if (!_ep || (!ep->desc && ep->num != 0))
+ return -EINVAL;
+ dev = ep->dev;
+ if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)
+ return -ESHUTDOWN;
+
+ /* FIXME implement PIO fallback for ZLPs with DMA */
+ if (ep->dma && _req->length == 0)
+ return -EOPNOTSUPP;
+
+ /* set up dma mapping in case the caller didn't */
+ if (ep->dma && _req->dma == DMA_ADDR_INVALID) {
+ _req->dma = pci_map_single (dev->pdev, _req->buf, _req->length,
+ ep->is_in ? PCI_DMA_TODEVICE : PCI_DMA_FROMDEVICE);
+ req->mapped = 1;
+ }
+
+#if 0
+ VDEBUG (dev, "%s queue req %p, len %d buf %p\n",
+ _ep->name, _req, _req->length, _req->buf);
+#endif
+
+ spin_lock_irqsave (&dev->lock, flags);
+
+ _req->status = -EINPROGRESS;
+ _req->actual = 0;
+
+ /* kickstart this i/o queue? */
+ if (list_empty (&ep->queue) && !ep->stopped) {
+ /* use DMA if the endpoint supports it, else pio */
+ if (ep->dma)
+ start_dma (ep, req);
+ else {
+ /* maybe there's no control data, just status ack */
+ if (ep->num == 0 && _req->length == 0) {
+ allow_status (ep);
+ done (ep, req, 0);
+ VDEBUG (dev, "%s status ack\n", ep->ep.name);
+ goto done;
+ }
+
+ /* PIO ... stuff the fifo, or unblock it. */
+ if (ep->is_in)
+ write_fifo (ep, _req);
+ else if (list_empty (&ep->queue)) {
+ u32 s;
+
+ /* OUT FIFO might have packet(s) buffered */
+ s = readl (&ep->regs->ep_stat);
+ if ((s & (1 << FIFO_EMPTY)) == 0) {
+ /* note: _req->short_not_ok is
+ * ignored here since PIO _always_
+ * stops queue advance here, and
+ * _req->status doesn't change for
+ * short reads (only _req->actual)
+ */
+ if (read_fifo (ep, req)) {
+ done (ep, req, 0);
+ if (ep->num == 0)
+ allow_status (ep);
+ /* don't queue it */
+ req = NULL;
+ } else
+ s = readl (&ep->regs->ep_stat);
+ }
+
+ /* don't NAK, let the fifo fill */
+ if (req && (s & (1 << NAK_OUT_PACKETS)))
+ writel ((1 << CLEAR_NAK_OUT_PACKETS),
+ &ep->regs->ep_rsp);
+ }
+ }
+
+ } else if (ep->dma) {
+ int valid = 1;
+
+ if (ep->is_in) {
+ int expect;
+
+ /* preventing magic zlps is per-engine state, not
+ * per-transfer; irq logic must recover hiccups.
+ */
+ expect = likely (req->req.zero
+ || (req->req.length % ep->ep.maxpacket) != 0);
+ if (expect != ep->in_fifo_validate)
+ valid = 0;
+ }
+ queue_dma (ep, req, valid);
+
+ } /* else the irq handler advances the queue. */
+
+ if (req)
+ list_add_tail (&req->queue, &ep->queue);
+done:
+ spin_unlock_irqrestore (&dev->lock, flags);
+
+ /* pci writes may still be posted */
+ return 0;
+}
+
+static inline void
+dma_done (
+ struct net2280_ep *ep,
+ struct net2280_request *req,
+ u32 dmacount,
+ int status
+)
+{
+ req->req.actual = req->req.length - (DMA_BYTE_COUNT_MASK & dmacount);
+ done (ep, req, status);
+}
+
+static void restart_dma (struct net2280_ep *ep);
+
+static void scan_dma_completions (struct net2280_ep *ep)
+{
+ /* only look at descriptors that were "naturally" retired,
+ * so fifo and list head state won't matter
+ */
+ while (!list_empty (&ep->queue)) {
+ struct net2280_request *req;
+ u32 tmp;
+
+ req = list_entry (ep->queue.next,
+ struct net2280_request, queue);
+ if (!req->valid)
+ break;
+ rmb ();
+ tmp = le32_to_cpup (&req->td->dmacount);
+ if ((tmp & (1 << VALID_BIT)) != 0)
+ break;
+
+ /* SHORT_PACKET_TRANSFERRED_INTERRUPT handles "usb-short"
+ * cases where DMA must be aborted; this code handles
+ * all non-abort DMA completions.
+ */
+ if (unlikely (req->td->dmadesc == 0)) {
+ /* paranoia */
+ tmp = readl (&ep->dma->dmacount);
+ if (tmp & DMA_BYTE_COUNT_MASK)
+ break;
+ /* single transfer mode */
+ dma_done (ep, req, tmp, 0);
+ break;
+ } else if (!ep->is_in
+ && (req->req.length % ep->ep.maxpacket) != 0) {
+ tmp = readl (&ep->regs->ep_stat);
+
+ /* AVOID TROUBLE HERE by not issuing short reads from
+ * your gadget driver. That helps avoids errata 0121,
+ * 0122, and 0124; not all cases trigger the warning.
+ */
+ if ((tmp & (1 << NAK_OUT_PACKETS)) == 0) {
+ WARN (ep->dev, "%s lost packet sync!\n",
+ ep->ep.name);
+ req->req.status = -EOVERFLOW;
+ } else if ((tmp = readl (&ep->regs->ep_avail)) != 0) {
+ /* fifo gets flushed later */
+ ep->out_overflow = 1;
+ DEBUG (ep->dev, "%s dma, discard %d len %d\n",
+ ep->ep.name, tmp,
+ req->req.length);
+ req->req.status = -EOVERFLOW;
+ }
+ }
+ dma_done (ep, req, tmp, 0);
+ }
+}
+
+static void restart_dma (struct net2280_ep *ep)
+{
+ struct net2280_request *req;
+ u32 dmactl = dmactl_default;
+
+ if (ep->stopped)
+ return;
+ req = list_entry (ep->queue.next, struct net2280_request, queue);
+
+ if (!use_dma_chaining) {
+ start_dma (ep, req);
+ return;
+ }
+
+ /* the 2280 will be processing the queue unless queue hiccups after
+ * the previous transfer:
+ * IN: wanted automagic zlp, head doesn't (or vice versa)
+ * DMA_FIFO_VALIDATE doesn't init from dma descriptors.
+ * OUT: was "usb-short", we must restart.
+ */
+ if (ep->is_in && !req->valid) {
+ struct net2280_request *entry, *prev = NULL;
+ int reqmode, done = 0;
+
+ DEBUG (ep->dev, "%s dma hiccup td %p\n", ep->ep.name, req->td);
+ ep->in_fifo_validate = likely (req->req.zero
+ || (req->req.length % ep->ep.maxpacket) != 0);
+ if (ep->in_fifo_validate)
+ dmactl |= (1 << DMA_FIFO_VALIDATE);
+ list_for_each_entry (entry, &ep->queue, queue) {
+ u32 dmacount;
+
+ if (entry == req)
+ continue;
+ dmacount = entry->td->dmacount;
+ if (!done) {
+ reqmode = likely (entry->req.zero
+ || (entry->req.length
+ % ep->ep.maxpacket) != 0);
+ if (reqmode == ep->in_fifo_validate) {
+ entry->valid = 1;
+ dmacount |= valid_bit;
+ entry->td->dmacount = dmacount;
+ prev = entry;
+ continue;
+ } else {
+ /* force a hiccup */
+ prev->td->dmacount |= dma_done_ie;
+ done = 1;
+ }
+ }
+
+ /* walk the rest of the queue so unlinks behave */
+ entry->valid = 0;
+ dmacount &= ~valid_bit;
+ entry->td->dmacount = dmacount;
+ prev = entry;
+ }
+ }
+
+ writel (0, &ep->dma->dmactl);
+ start_queue (ep, dmactl, req->td_dma);
+}
+
+static void abort_dma (struct net2280_ep *ep)
+{
+ /* abort the current transfer */
+ if (likely (!list_empty (&ep->queue))) {
+ /* FIXME work around errata 0121, 0122, 0124 */
+ writel ((1 << DMA_ABORT), &ep->dma->dmastat);
+ spin_stop_dma (ep->dma);
+ } else
+ stop_dma (ep->dma);
+ scan_dma_completions (ep);
+}
+
+/* dequeue ALL requests */
+static void nuke (struct net2280_ep *ep)
+{
+ struct net2280_request *req;
+
+ /* called with spinlock held */
+ ep->stopped = 1;
+ if (ep->dma)
+ abort_dma (ep);
+ while (!list_empty (&ep->queue)) {
+ req = list_entry (ep->queue.next,
+ struct net2280_request,
+ queue);
+ done (ep, req, -ESHUTDOWN);
+ }
+}
+
+/* dequeue JUST ONE request */
+static int net2280_dequeue (struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct net2280_ep *ep;
+ struct net2280_request *req;
+ unsigned long flags;
+ u32 dmactl;
+ int stopped;
+
+ ep = container_of (_ep, struct net2280_ep, ep);
+ if (!_ep || (!ep->desc && ep->num != 0) || !_req)
+ return -EINVAL;
+
+ spin_lock_irqsave (&ep->dev->lock, flags);
+ stopped = ep->stopped;
+
+ /* quiesce dma while we patch the queue */
+ dmactl = 0;
+ ep->stopped = 1;
+ if (ep->dma) {
+ dmactl = readl (&ep->dma->dmactl);
+ /* WARNING erratum 0127 may kick in ... */
+ stop_dma (ep->dma);
+ scan_dma_completions (ep);
+ }
+
+ /* make sure it's still queued on this endpoint */
+ list_for_each_entry (req, &ep->queue, queue) {
+ if (&req->req == _req)
+ break;
+ }
+ if (&req->req != _req) {
+ spin_unlock_irqrestore (&ep->dev->lock, flags);
+ return -EINVAL;
+ }
+
+ /* queue head may be partially complete. */
+ if (ep->queue.next == &req->queue) {
+ if (ep->dma) {
+ DEBUG (ep->dev, "unlink (%s) dma\n", _ep->name);
+ _req->status = -ECONNRESET;
+ abort_dma (ep);
+ if (likely (ep->queue.next == &req->queue)) {
+ // NOTE: misreports single-transfer mode
+ req->td->dmacount = 0; /* invalidate */
+ dma_done (ep, req,
+ readl (&ep->dma->dmacount),
+ -ECONNRESET);
+ }
+ } else {
+ DEBUG (ep->dev, "unlink (%s) pio\n", _ep->name);
+ done (ep, req, -ECONNRESET);
+ }
+ req = NULL;
+
+ /* patch up hardware chaining data */
+ } else if (ep->dma && use_dma_chaining) {
+ if (req->queue.prev == ep->queue.next) {
+ writel (le32_to_cpu (req->td->dmadesc),
+ &ep->dma->dmadesc);
+ if (req->td->dmacount & dma_done_ie)
+ writel (readl (&ep->dma->dmacount)
+ | dma_done_ie,
+ &ep->dma->dmacount);
+ } else {
+ struct net2280_request *prev;
+
+ prev = list_entry (req->queue.prev,
+ struct net2280_request, queue);
+ prev->td->dmadesc = req->td->dmadesc;
+ if (req->td->dmacount & dma_done_ie)
+ prev->td->dmacount |= dma_done_ie;
+ }
+ }
+
+ if (req)
+ done (ep, req, -ECONNRESET);
+ ep->stopped = stopped;
+
+ if (ep->dma) {
+ /* turn off dma on inactive queues */
+ if (list_empty (&ep->queue))
+ stop_dma (ep->dma);
+ else if (!ep->stopped) {
+ /* resume current request, or start new one */
+ if (req)
+ writel (dmactl, &ep->dma->dmactl);
+ else
+ start_dma (ep, list_entry (ep->queue.next,
+ struct net2280_request, queue));
+ }
+ }
+
+ spin_unlock_irqrestore (&ep->dev->lock, flags);
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int net2280_fifo_status (struct usb_ep *_ep);
+
+static int
+net2280_set_halt (struct usb_ep *_ep, int value)
+{
+ struct net2280_ep *ep;
+ unsigned long flags;
+ int retval = 0;
+
+ ep = container_of (_ep, struct net2280_ep, ep);
+ if (!_ep || (!ep->desc && ep->num != 0))
+ return -EINVAL;
+ if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN)
+ return -ESHUTDOWN;
+ if (ep->desc /* not ep0 */ && (ep->desc->bmAttributes & 0x03)
+ == USB_ENDPOINT_XFER_ISOC)
+ return -EINVAL;
+
+ spin_lock_irqsave (&ep->dev->lock, flags);
+ if (!list_empty (&ep->queue))
+ retval = -EAGAIN;
+ else if (ep->is_in && value && net2280_fifo_status (_ep) != 0)
+ retval = -EAGAIN;
+ else {
+ VDEBUG (ep->dev, "%s %s halt\n", _ep->name,
+ value ? "set" : "clear");
+ /* set/clear, then synch memory views with the device */
+ if (value) {
+ if (ep->num == 0)
+ ep->dev->protocol_stall = 1;
+ else
+ set_halt (ep);
+ } else
+ clear_halt (ep);
+ (void) readl (&ep->regs->ep_rsp);
+ }
+ spin_unlock_irqrestore (&ep->dev->lock, flags);
+
+ return retval;
+}
+
+static int
+net2280_fifo_status (struct usb_ep *_ep)
+{
+ struct net2280_ep *ep;
+ u32 avail;
+
+ ep = container_of (_ep, struct net2280_ep, ep);
+ if (!_ep || (!ep->desc && ep->num != 0))
+ return -ENODEV;
+ if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN)
+ return -ESHUTDOWN;
+
+ avail = readl (&ep->regs->ep_avail) & ((1 << 12) - 1);
+ if (avail > ep->fifo_size)
+ return -EOVERFLOW;
+ if (ep->is_in)
+ avail = ep->fifo_size - avail;
+ return avail;
+}
+
+static void
+net2280_fifo_flush (struct usb_ep *_ep)
+{
+ struct net2280_ep *ep;
+
+ ep = container_of (_ep, struct net2280_ep, ep);
+ if (!_ep || (!ep->desc && ep->num != 0))
+ return;
+ if (!ep->dev->driver || ep->dev->gadget.speed == USB_SPEED_UNKNOWN)
+ return;
+
+ writel ((1 << FIFO_FLUSH), &ep->regs->ep_stat);
+ (void) readl (&ep->regs->ep_rsp);
+}
+
+static struct usb_ep_ops net2280_ep_ops = {
+ .enable = net2280_enable,
+ .disable = net2280_disable,
+
+ .alloc_request = net2280_alloc_request,
+ .free_request = net2280_free_request,
+
+ .alloc_buffer = net2280_alloc_buffer,
+ .free_buffer = net2280_free_buffer,
+
+ .queue = net2280_queue,
+ .dequeue = net2280_dequeue,
+
+ .set_halt = net2280_set_halt,
+ .fifo_status = net2280_fifo_status,
+ .fifo_flush = net2280_fifo_flush,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int net2280_get_frame (struct usb_gadget *_gadget)
+{
+ struct net2280 *dev;
+ unsigned long flags;
+ u16 retval;
+
+ if (!_gadget)
+ return -ENODEV;
+ dev = container_of (_gadget, struct net2280, gadget);
+ spin_lock_irqsave (&dev->lock, flags);
+ retval = get_idx_reg (dev->regs, REG_FRAME) & 0x03ff;
+ spin_unlock_irqrestore (&dev->lock, flags);
+ return retval;
+}
+
+static int net2280_wakeup (struct usb_gadget *_gadget)
+{
+ struct net2280 *dev;
+ u32 tmp;
+ unsigned long flags;
+
+ if (!_gadget)
+ return 0;
+ dev = container_of (_gadget, struct net2280, gadget);
+
+ spin_lock_irqsave (&dev->lock, flags);
+ tmp = readl (&dev->usb->usbctl);
+ if (tmp & (1 << DEVICE_REMOTE_WAKEUP_ENABLE))
+ writel (1 << GENERATE_RESUME, &dev->usb->usbstat);
+ spin_unlock_irqrestore (&dev->lock, flags);
+
+ /* pci writes may still be posted */
+ return 0;
+}
+
+static int net2280_set_selfpowered (struct usb_gadget *_gadget, int value)
+{
+ struct net2280 *dev;
+ u32 tmp;
+ unsigned long flags;
+
+ if (!_gadget)
+ return 0;
+ dev = container_of (_gadget, struct net2280, gadget);
+
+ spin_lock_irqsave (&dev->lock, flags);
+ tmp = readl (&dev->usb->usbctl);
+ if (value)
+ tmp |= (1 << SELF_POWERED_STATUS);
+ else
+ tmp &= ~(1 << SELF_POWERED_STATUS);
+ writel (tmp, &dev->usb->usbctl);
+ spin_unlock_irqrestore (&dev->lock, flags);
+
+ return 0;
+}
+
+static int net2280_pullup(struct usb_gadget *_gadget, int is_on)
+{
+ struct net2280 *dev;
+ u32 tmp;
+ unsigned long flags;
+
+ if (!_gadget)
+ return -ENODEV;
+ dev = container_of (_gadget, struct net2280, gadget);
+
+ spin_lock_irqsave (&dev->lock, flags);
+ tmp = readl (&dev->usb->usbctl);
+ dev->softconnect = (is_on != 0);
+ if (is_on)
+ tmp |= (1 << USB_DETECT_ENABLE);
+ else
+ tmp &= ~(1 << USB_DETECT_ENABLE);
+ writel (tmp, &dev->usb->usbctl);
+ spin_unlock_irqrestore (&dev->lock, flags);
+
+ return 0;
+}
+
+static const struct usb_gadget_ops net2280_ops = {
+ .get_frame = net2280_get_frame,
+ .wakeup = net2280_wakeup,
+ .set_selfpowered = net2280_set_selfpowered,
+ .pullup = net2280_pullup,
+};
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+/* FIXME move these into procfs, and use seq_file.
+ * Sysfs _still_ doesn't behave for arbitrarily sized files,
+ * and also doesn't help products using this with 2.4 kernels.
+ */
+
+/* "function" sysfs attribute */
+static ssize_t
+show_function (struct device *_dev, char *buf)
+{
+ struct net2280 *dev = dev_get_drvdata (_dev);
+
+ if (!dev->driver
+ || !dev->driver->function
+ || strlen (dev->driver->function) > PAGE_SIZE)
+ return 0;
+ return scnprintf (buf, PAGE_SIZE, "%s\n", dev->driver->function);
+}
+static DEVICE_ATTR (function, S_IRUGO, show_function, NULL);
+
+static ssize_t
+show_registers (struct device *_dev, char *buf)
+{
+ struct net2280 *dev;
+ char *next;
+ unsigned size, t;
+ unsigned long flags;
+ int i;
+ u32 t1, t2;
+ char *s;
+
+ dev = dev_get_drvdata (_dev);
+ next = buf;
+ size = PAGE_SIZE;
+ spin_lock_irqsave (&dev->lock, flags);
+
+ if (dev->driver)
+ s = dev->driver->driver.name;
+ else
+ s = "(none)";
+
+ /* Main Control Registers */
+ t = scnprintf (next, size, "%s version " DRIVER_VERSION
+ ", chiprev %04x, dma %s\n\n"
+ "devinit %03x fifoctl %08x gadget '%s'\n"
+ "pci irqenb0 %02x irqenb1 %08x "
+ "irqstat0 %04x irqstat1 %08x\n",
+ driver_name, dev->chiprev,
+ use_dma
+ ? (use_dma_chaining ? "chaining" : "enabled")
+ : "disabled",
+ readl (&dev->regs->devinit),
+ readl (&dev->regs->fifoctl),
+ s,
+ readl (&dev->regs->pciirqenb0),
+ readl (&dev->regs->pciirqenb1),
+ readl (&dev->regs->irqstat0),
+ readl (&dev->regs->irqstat1));
+ size -= t;
+ next += t;
+
+ /* USB Control Registers */
+ t1 = readl (&dev->usb->usbctl);
+ t2 = readl (&dev->usb->usbstat);
+ if (t1 & (1 << VBUS_PIN)) {
+ if (t2 & (1 << HIGH_SPEED))
+ s = "high speed";
+ else if (dev->gadget.speed == USB_SPEED_UNKNOWN)
+ s = "powered";
+ else
+ s = "full speed";
+ /* full speed bit (6) not working?? */
+ } else
+ s = "not attached";
+ t = scnprintf (next, size,
+ "stdrsp %08x usbctl %08x usbstat %08x "
+ "addr 0x%02x (%s)\n",
+ readl (&dev->usb->stdrsp), t1, t2,
+ readl (&dev->usb->ouraddr), s);
+ size -= t;
+ next += t;
+
+ /* PCI Master Control Registers */
+
+ /* DMA Control Registers */
+
+ /* Configurable EP Control Registers */
+ for (i = 0; i < 7; i++) {
+ struct net2280_ep *ep;
+
+ ep = &dev->ep [i];
+ if (i && !ep->desc)
+ continue;
+
+ t1 = readl (&ep->regs->ep_cfg);
+ t2 = readl (&ep->regs->ep_rsp) & 0xff;
+ t = scnprintf (next, size,
+ "\n%s\tcfg %05x rsp (%02x) %s%s%s%s%s%s%s%s"
+ "irqenb %02x\n",
+ ep->ep.name, t1, t2,
+ (t2 & (1 << CLEAR_NAK_OUT_PACKETS))
+ ? "NAK " : "",
+ (t2 & (1 << CLEAR_EP_HIDE_STATUS_PHASE))
+ ? "hide " : "",
+ (t2 & (1 << CLEAR_EP_FORCE_CRC_ERROR))
+ ? "CRC " : "",
+ (t2 & (1 << CLEAR_INTERRUPT_MODE))
+ ? "interrupt " : "",
+ (t2 & (1<<CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE))
+ ? "status " : "",
+ (t2 & (1 << CLEAR_NAK_OUT_PACKETS_MODE))
+ ? "NAKmode " : "",
+ (t2 & (1 << CLEAR_ENDPOINT_TOGGLE))
+ ? "DATA1 " : "DATA0 ",
+ (t2 & (1 << CLEAR_ENDPOINT_HALT))
+ ? "HALT " : "",
+ readl (&ep->regs->ep_irqenb));
+ size -= t;
+ next += t;
+
+ t = scnprintf (next, size,
+ "\tstat %08x avail %04x "
+ "(ep%d%s-%s)%s\n",
+ readl (&ep->regs->ep_stat),
+ readl (&ep->regs->ep_avail),
+ t1 & 0x0f, DIR_STRING (t1),
+ type_string (t1 >> 8),
+ ep->stopped ? "*" : "");
+ size -= t;
+ next += t;
+
+ if (!ep->dma)
+ continue;
+
+ t = scnprintf (next, size,
+ " dma\tctl %08x stat %08x count %08x\n"
+ "\taddr %08x desc %08x\n",
+ readl (&ep->dma->dmactl),
+ readl (&ep->dma->dmastat),
+ readl (&ep->dma->dmacount),
+ readl (&ep->dma->dmaaddr),
+ readl (&ep->dma->dmadesc));
+ size -= t;
+ next += t;
+
+ }
+
+ /* Indexed Registers */
+ // none yet
+
+ /* Statistics */
+ t = scnprintf (next, size, "\nirqs: ");
+ size -= t;
+ next += t;
+ for (i = 0; i < 7; i++) {
+ struct net2280_ep *ep;
+
+ ep = &dev->ep [i];
+ if (i && !ep->irqs)
+ continue;
+ t = scnprintf (next, size, " %s/%lu", ep->ep.name, ep->irqs);
+ size -= t;
+ next += t;
+
+ }
+ t = scnprintf (next, size, "\n");
+ size -= t;
+ next += t;
+
+ spin_unlock_irqrestore (&dev->lock, flags);
+
+ return PAGE_SIZE - size;
+}
+static DEVICE_ATTR (registers, S_IRUGO, show_registers, NULL);
+
+static ssize_t
+show_queues (struct device *_dev, char *buf)
+{
+ struct net2280 *dev;
+ char *next;
+ unsigned size;
+ unsigned long flags;
+ int i;
+
+ dev = dev_get_drvdata (_dev);
+ next = buf;
+ size = PAGE_SIZE;
+ spin_lock_irqsave (&dev->lock, flags);
+
+ for (i = 0; i < 7; i++) {
+ struct net2280_ep *ep = &dev->ep [i];
+ struct net2280_request *req;
+ int t;
+
+ if (i != 0) {
+ const struct usb_endpoint_descriptor *d;
+
+ d = ep->desc;
+ if (!d)
+ continue;
+ t = d->bEndpointAddress;
+ t = scnprintf (next, size,
+ "\n%s (ep%d%s-%s) max %04x %s fifo %d\n",
+ ep->ep.name, t & USB_ENDPOINT_NUMBER_MASK,
+ (t & USB_DIR_IN) ? "in" : "out",
+ ({ char *val;
+ switch (d->bmAttributes & 0x03) {
+ case USB_ENDPOINT_XFER_BULK:
+ val = "bulk"; break;
+ case USB_ENDPOINT_XFER_INT:
+ val = "intr"; break;
+ default:
+ val = "iso"; break;
+ }; val; }),
+ le16_to_cpu (d->wMaxPacketSize) & 0x1fff,
+ ep->dma ? "dma" : "pio", ep->fifo_size
+ );
+ } else /* ep0 should only have one transfer queued */
+ t = scnprintf (next, size, "ep0 max 64 pio %s\n",
+ ep->is_in ? "in" : "out");
+ if (t <= 0 || t > size)
+ goto done;
+ size -= t;
+ next += t;
+
+ if (list_empty (&ep->queue)) {
+ t = scnprintf (next, size, "\t(nothing queued)\n");
+ if (t <= 0 || t > size)
+ goto done;
+ size -= t;
+ next += t;
+ continue;
+ }
+ list_for_each_entry (req, &ep->queue, queue) {
+ if (ep->dma && req->td_dma == readl (&ep->dma->dmadesc))
+ t = scnprintf (next, size,
+ "\treq %p len %d/%d "
+ "buf %p (dmacount %08x)\n",
+ &req->req, req->req.actual,
+ req->req.length, req->req.buf,
+ readl (&ep->dma->dmacount));
+ else
+ t = scnprintf (next, size,
+ "\treq %p len %d/%d buf %p\n",
+ &req->req, req->req.actual,
+ req->req.length, req->req.buf);
+ if (t <= 0 || t > size)
+ goto done;
+ size -= t;
+ next += t;
+
+ if (ep->dma) {
+ struct net2280_dma *td;
+
+ td = req->td;
+ t = scnprintf (next, size, "\t td %08x "
+ " count %08x buf %08x desc %08x\n",
+ (u32) req->td_dma,
+ le32_to_cpu (td->dmacount),
+ le32_to_cpu (td->dmaaddr),
+ le32_to_cpu (td->dmadesc));
+ if (t <= 0 || t > size)
+ goto done;
+ size -= t;
+ next += t;
+ }
+ }
+ }
+
+done:
+ spin_unlock_irqrestore (&dev->lock, flags);
+ return PAGE_SIZE - size;
+}
+static DEVICE_ATTR (queues, S_IRUGO, show_queues, NULL);
+
+
+#else
+
+#define device_create_file(a,b) do {} while (0)
+#define device_remove_file device_create_file
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/* another driver-specific mode might be a request type doing dma
+ * to/from another device fifo instead of to/from memory.
+ */
+
+static void set_fifo_mode (struct net2280 *dev, int mode)
+{
+ /* keeping high bits preserves BAR2 */
+ writel ((0xffff << PCI_BASE2_RANGE) | mode, &dev->regs->fifoctl);
+
+ /* always ep-{a,b,e,f} ... maybe not ep-c or ep-d */
+ INIT_LIST_HEAD (&dev->gadget.ep_list);
+ list_add_tail (&dev->ep [1].ep.ep_list, &dev->gadget.ep_list);
+ list_add_tail (&dev->ep [2].ep.ep_list, &dev->gadget.ep_list);
+ switch (mode) {
+ case 0:
+ list_add_tail (&dev->ep [3].ep.ep_list, &dev->gadget.ep_list);
+ list_add_tail (&dev->ep [4].ep.ep_list, &dev->gadget.ep_list);
+ dev->ep [1].fifo_size = dev->ep [2].fifo_size = 1024;
+ break;
+ case 1:
+ dev->ep [1].fifo_size = dev->ep [2].fifo_size = 2048;
+ break;
+ case 2:
+ list_add_tail (&dev->ep [3].ep.ep_list, &dev->gadget.ep_list);
+ dev->ep [1].fifo_size = 2048;
+ dev->ep [2].fifo_size = 1024;
+ break;
+ }
+ /* fifo sizes for ep0, ep-c, ep-d, ep-e, and ep-f never change */
+ list_add_tail (&dev->ep [5].ep.ep_list, &dev->gadget.ep_list);
+ list_add_tail (&dev->ep [6].ep.ep_list, &dev->gadget.ep_list);
+}
+
+/**
+ * net2280_set_fifo_mode - change allocation of fifo buffers
+ * @gadget: access to the net2280 device that will be updated
+ * @mode: 0 for default, four 1kB buffers (ep-a through ep-d);
+ * 1 for two 2kB buffers (ep-a and ep-b only);
+ * 2 for one 2kB buffer (ep-a) and two 1kB ones (ep-b, ep-c).
+ *
+ * returns zero on success, else negative errno. when this succeeds,
+ * the contents of gadget->ep_list may have changed.
+ *
+ * you may only call this function when endpoints a-d are all disabled.
+ * use it whenever extra hardware buffering can help performance, such
+ * as before enabling "high bandwidth" interrupt endpoints that use
+ * maxpacket bigger than 512 (when double buffering would otherwise
+ * be unavailable).
+ */
+int net2280_set_fifo_mode (struct usb_gadget *gadget, int mode)
+{
+ int i;
+ struct net2280 *dev;
+ int status = 0;
+ unsigned long flags;
+
+ if (!gadget)
+ return -ENODEV;
+ dev = container_of (gadget, struct net2280, gadget);
+
+ spin_lock_irqsave (&dev->lock, flags);
+
+ for (i = 1; i <= 4; i++)
+ if (dev->ep [i].desc) {
+ status = -EINVAL;
+ break;
+ }
+ if (mode < 0 || mode > 2)
+ status = -EINVAL;
+ if (status == 0)
+ set_fifo_mode (dev, mode);
+ spin_unlock_irqrestore (&dev->lock, flags);
+
+ if (status == 0) {
+ if (mode == 1)
+ DEBUG (dev, "fifo: ep-a 2K, ep-b 2K\n");
+ else if (mode == 2)
+ DEBUG (dev, "fifo: ep-a 2K, ep-b 1K, ep-c 1K\n");
+ /* else all are 1K */
+ }
+ return status;
+}
+EXPORT_SYMBOL (net2280_set_fifo_mode);
+
+/*-------------------------------------------------------------------------*/
+
+/* keeping it simple:
+ * - one bus driver, initted first;
+ * - one function driver, initted second
+ *
+ * most of the work to support multiple net2280 controllers would
+ * be to associate this gadget driver (yes?) with all of them, or
+ * perhaps to bind specific drivers to specific devices.
+ */
+
+static struct net2280 *the_controller;
+
+static void usb_reset (struct net2280 *dev)
+{
+ u32 tmp;
+
+ dev->gadget.speed = USB_SPEED_UNKNOWN;
+ (void) readl (&dev->usb->usbctl);
+
+ net2280_led_init (dev);
+
+ /* disable automatic responses, and irqs */
+ writel (0, &dev->usb->stdrsp);
+ writel (0, &dev->regs->pciirqenb0);
+ writel (0, &dev->regs->pciirqenb1);
+
+ /* clear old dma and irq state */
+ for (tmp = 0; tmp < 4; tmp++) {
+ struct net2280_ep *ep = &dev->ep [tmp + 1];
+
+ if (ep->dma)
+ abort_dma (ep);
+ }
+ writel (~0, &dev->regs->irqstat0),
+ writel (~(1 << SUSPEND_REQUEST_INTERRUPT), &dev->regs->irqstat1),
+
+ /* reset, and enable pci */
+ tmp = readl (&dev->regs->devinit)
+ | (1 << PCI_ENABLE)
+ | (1 << FIFO_SOFT_RESET)
+ | (1 << USB_SOFT_RESET)
+ | (1 << M8051_RESET);
+ writel (tmp, &dev->regs->devinit);
+
+ /* standard fifo and endpoint allocations */
+ set_fifo_mode (dev, (fifo_mode <= 2) ? fifo_mode : 0);
+}
+
+static void usb_reinit (struct net2280 *dev)
+{
+ u32 tmp;
+ int init_dma;
+
+ /* use_dma changes are ignored till next device re-init */
+ init_dma = use_dma;
+
+ /* basic endpoint init */
+ for (tmp = 0; tmp < 7; tmp++) {
+ struct net2280_ep *ep = &dev->ep [tmp];
+
+ ep->ep.name = ep_name [tmp];
+ ep->dev = dev;
+ ep->num = tmp;
+
+ if (tmp > 0 && tmp <= 4) {
+ ep->fifo_size = 1024;
+ if (init_dma)
+ ep->dma = &dev->dma [tmp - 1];
+ } else
+ ep->fifo_size = 64;
+ ep->regs = &dev->epregs [tmp];
+ ep_reset (dev->regs, ep);
+ }
+ dev->ep [0].ep.maxpacket = 64;
+ dev->ep [5].ep.maxpacket = 64;
+ dev->ep [6].ep.maxpacket = 64;
+
+ dev->gadget.ep0 = &dev->ep [0].ep;
+ dev->ep [0].stopped = 0;
+ INIT_LIST_HEAD (&dev->gadget.ep0->ep_list);
+
+ /* we want to prevent lowlevel/insecure access from the USB host,
+ * but erratum 0119 means this enable bit is ignored
+ */
+ for (tmp = 0; tmp < 5; tmp++)
+ writel (EP_DONTUSE, &dev->dep [tmp].dep_cfg);
+}
+
+static void ep0_start (struct net2280 *dev)
+{
+ writel ( (1 << CLEAR_EP_HIDE_STATUS_PHASE)
+ | (1 << CLEAR_NAK_OUT_PACKETS)
+ | (1 << CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE)
+ , &dev->epregs [0].ep_rsp);
+
+ /*
+ * hardware optionally handles a bunch of standard requests
+ * that the API hides from drivers anyway. have it do so.
+ * endpoint status/features are handled in software, to
+ * help pass tests for some dubious behavior.
+ */
+ writel ( (1 << SET_TEST_MODE)
+ | (1 << SET_ADDRESS)
+ | (1 << DEVICE_SET_CLEAR_DEVICE_REMOTE_WAKEUP)
+ | (1 << GET_DEVICE_STATUS)
+ | (1 << GET_INTERFACE_STATUS)
+ , &dev->usb->stdrsp);
+ writel ( (1 << USB_ROOT_PORT_WAKEUP_ENABLE)
+ | (1 << SELF_POWERED_USB_DEVICE)
+ | (1 << REMOTE_WAKEUP_SUPPORT)
+ | (dev->softconnect << USB_DETECT_ENABLE)
+ | (1 << SELF_POWERED_STATUS)
+ , &dev->usb->usbctl);
+
+ /* enable irqs so we can see ep0 and general operation */
+ writel ( (1 << SETUP_PACKET_INTERRUPT_ENABLE)
+ | (1 << ENDPOINT_0_INTERRUPT_ENABLE)
+ , &dev->regs->pciirqenb0);
+ writel ( (1 << PCI_INTERRUPT_ENABLE)
+ | (1 << PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE)
+ | (1 << PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE)
+ | (1 << PCI_RETRY_ABORT_INTERRUPT_ENABLE)
+ | (1 << VBUS_INTERRUPT_ENABLE)
+ | (1 << ROOT_PORT_RESET_INTERRUPT_ENABLE)
+ | (1 << SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE)
+ , &dev->regs->pciirqenb1);
+
+ /* don't leave any writes posted */
+ (void) readl (&dev->usb->usbctl);
+}
+
+/* when a driver is successfully registered, it will receive
+ * control requests including set_configuration(), which enables
+ * non-control requests. then usb traffic follows until a
+ * disconnect is reported. then a host may connect again, or
+ * the driver might get unbound.
+ */
+int usb_gadget_register_driver (struct usb_gadget_driver *driver)
+{
+ struct net2280 *dev = the_controller;
+ int retval;
+ unsigned i;
+
+ /* insist on high speed support from the driver, since
+ * (dev->usb->xcvrdiag & FORCE_FULL_SPEED_MODE)
+ * "must not be used in normal operation"
+ */
+ if (!driver
+ || driver->speed != USB_SPEED_HIGH
+ || !driver->bind
+ || !driver->unbind
+ || !driver->setup)
+ return -EINVAL;
+ if (!dev)
+ return -ENODEV;
+ if (dev->driver)
+ return -EBUSY;
+
+ for (i = 0; i < 7; i++)
+ dev->ep [i].irqs = 0;
+
+ /* hook up the driver ... */
+ dev->softconnect = 1;
+ driver->driver.bus = NULL;
+ dev->driver = driver;
+ dev->gadget.dev.driver = &driver->driver;
+ retval = driver->bind (&dev->gadget);
+ if (retval) {
+ DEBUG (dev, "bind to driver %s --> %d\n",
+ driver->driver.name, retval);
+ dev->driver = NULL;
+ dev->gadget.dev.driver = NULL;
+ return retval;
+ }
+
+ device_create_file (&dev->pdev->dev, &dev_attr_function);
+ device_create_file (&dev->pdev->dev, &dev_attr_queues);
+
+ /* ... then enable host detection and ep0; and we're ready
+ * for set_configuration as well as eventual disconnect.
+ */
+ net2280_led_active (dev, 1);
+ ep0_start (dev);
+
+ DEBUG (dev, "%s ready, usbctl %08x stdrsp %08x\n",
+ driver->driver.name,
+ readl (&dev->usb->usbctl),
+ readl (&dev->usb->stdrsp));
+
+ /* pci writes may still be posted */
+ return 0;
+}
+EXPORT_SYMBOL (usb_gadget_register_driver);
+
+static void
+stop_activity (struct net2280 *dev, struct usb_gadget_driver *driver)
+{
+ int i;
+
+ /* don't disconnect if it's not connected */
+ if (dev->gadget.speed == USB_SPEED_UNKNOWN)
+ driver = NULL;
+
+ /* stop hardware; prevent new request submissions;
+ * and kill any outstanding requests.
+ */
+ usb_reset (dev);
+ for (i = 0; i < 7; i++)
+ nuke (&dev->ep [i]);
+
+ /* report disconnect; the driver is already quiesced */
+ if (driver) {
+ spin_unlock (&dev->lock);
+ driver->disconnect (&dev->gadget);
+ spin_lock (&dev->lock);
+ }
+
+ usb_reinit (dev);
+}
+
+int usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
+{
+ struct net2280 *dev = the_controller;
+ unsigned long flags;
+
+ if (!dev)
+ return -ENODEV;
+ if (!driver || driver != dev->driver)
+ return -EINVAL;
+
+ spin_lock_irqsave (&dev->lock, flags);
+ stop_activity (dev, driver);
+ spin_unlock_irqrestore (&dev->lock, flags);
+
+ net2280_pullup (&dev->gadget, 0);
+
+ driver->unbind (&dev->gadget);
+ dev->gadget.dev.driver = NULL;
+ dev->driver = NULL;
+
+ net2280_led_active (dev, 0);
+ device_remove_file (&dev->pdev->dev, &dev_attr_function);
+ device_remove_file (&dev->pdev->dev, &dev_attr_queues);
+
+ DEBUG (dev, "unregistered driver '%s'\n", driver->driver.name);
+ return 0;
+}
+EXPORT_SYMBOL (usb_gadget_unregister_driver);
+
+
+/*-------------------------------------------------------------------------*/
+
+/* handle ep0, ep-e, ep-f with 64 byte packets: packet per irq.
+ * also works for dma-capable endpoints, in pio mode or just
+ * to manually advance the queue after short OUT transfers.
+ */
+static void handle_ep_small (struct net2280_ep *ep)
+{
+ struct net2280_request *req;
+ u32 t;
+ /* 0 error, 1 mid-data, 2 done */
+ int mode = 1;
+
+ if (!list_empty (&ep->queue))
+ req = list_entry (ep->queue.next,
+ struct net2280_request, queue);
+ else
+ req = NULL;
+
+ /* ack all, and handle what we care about */
+ t = readl (&ep->regs->ep_stat);
+ ep->irqs++;
+#if 0
+ VDEBUG (ep->dev, "%s ack ep_stat %08x, req %p\n",
+ ep->ep.name, t, req ? &req->req : 0);
+#endif
+ writel (t & ~(1 << NAK_OUT_PACKETS), &ep->regs->ep_stat);
+
+ /* for ep0, monitor token irqs to catch data stage length errors
+ * and to synchronize on status.
+ *
+ * also, to defer reporting of protocol stalls ... here's where
+ * data or status first appears, handling stalls here should never
+ * cause trouble on the host side..
+ *
+ * control requests could be slightly faster without token synch for
+ * status, but status can jam up that way.
+ */
+ if (unlikely (ep->num == 0)) {
+ if (ep->is_in) {
+ /* status; stop NAKing */
+ if (t & (1 << DATA_OUT_PING_TOKEN_INTERRUPT)) {
+ if (ep->dev->protocol_stall) {
+ ep->stopped = 1;
+ set_halt (ep);
+ }
+ if (!req)
+ allow_status (ep);
+ mode = 2;
+ /* reply to extra IN data tokens with a zlp */
+ } else if (t & (1 << DATA_IN_TOKEN_INTERRUPT)) {
+ if (ep->dev->protocol_stall) {
+ ep->stopped = 1;
+ set_halt (ep);
+ mode = 2;
+ } else if (!req && ep->stopped)
+ write_fifo (ep, NULL);
+ }
+ } else {
+ /* status; stop NAKing */
+ if (t & (1 << DATA_IN_TOKEN_INTERRUPT)) {
+ if (ep->dev->protocol_stall) {
+ ep->stopped = 1;
+ set_halt (ep);
+ }
+ mode = 2;
+ /* an extra OUT token is an error */
+ } else if (((t & (1 << DATA_OUT_PING_TOKEN_INTERRUPT))
+ && req
+ && req->req.actual == req->req.length)
+ || !req) {
+ ep->dev->protocol_stall = 1;
+ set_halt (ep);
+ ep->stopped = 1;
+ if (req)
+ done (ep, req, -EOVERFLOW);
+ req = NULL;
+ }
+ }
+ }
+
+ if (unlikely (!req))
+ return;
+
+ /* manual DMA queue advance after short OUT */
+ if (likely (ep->dma != 0)) {
+ if (t & (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)) {
+ u32 count;
+ int stopped = ep->stopped;
+
+ /* TRANSFERRED works around OUT_DONE erratum 0112.
+ * we expect (N <= maxpacket) bytes; host wrote M.
+ * iff (M < N) we won't ever see a DMA interrupt.
+ */
+ ep->stopped = 1;
+ for (count = 0; ; t = readl (&ep->regs->ep_stat)) {
+
+ /* any preceding dma transfers must finish.
+ * dma handles (M >= N), may empty the queue
+ */
+ scan_dma_completions (ep);
+ if (unlikely (list_empty (&ep->queue)
+ || ep->out_overflow)) {
+ req = NULL;
+ break;
+ }
+ req = list_entry (ep->queue.next,
+ struct net2280_request, queue);
+
+ /* here either (M < N), a "real" short rx;
+ * or (M == N) and the queue didn't empty
+ */
+ if (likely (t & (1 << FIFO_EMPTY))) {
+ count = readl (&ep->dma->dmacount);
+ count &= DMA_BYTE_COUNT_MASK;
+ if (readl (&ep->dma->dmadesc)
+ != req->td_dma)
+ req = NULL;
+ break;
+ }
+ udelay(1);
+ }
+
+ /* stop DMA, leave ep NAKing */
+ writel ((1 << DMA_ABORT), &ep->dma->dmastat);
+ spin_stop_dma (ep->dma);
+
+ if (likely (req)) {
+ req->td->dmacount = 0;
+ t = readl (&ep->regs->ep_avail);
+ dma_done (ep, req, count, t);
+ }
+
+ /* also flush to prevent erratum 0106 trouble */
+ if (unlikely (ep->out_overflow
+ || (ep->dev->chiprev == 0x0100
+ && ep->dev->gadget.speed
+ == USB_SPEED_FULL))) {
+ out_flush (ep);
+ ep->out_overflow = 0;
+ }
+
+ /* (re)start dma if needed, stop NAKing */
+ ep->stopped = stopped;
+ if (!list_empty (&ep->queue))
+ restart_dma (ep);
+ } else
+ DEBUG (ep->dev, "%s dma ep_stat %08x ??\n",
+ ep->ep.name, t);
+ return;
+
+ /* data packet(s) received (in the fifo, OUT) */
+ } else if (t & (1 << DATA_PACKET_RECEIVED_INTERRUPT)) {
+ if (read_fifo (ep, req) && ep->num != 0)
+ mode = 2;
+
+ /* data packet(s) transmitted (IN) */
+ } else if (t & (1 << DATA_PACKET_TRANSMITTED_INTERRUPT)) {
+ unsigned len;
+
+ len = req->req.length - req->req.actual;
+ if (len > ep->ep.maxpacket)
+ len = ep->ep.maxpacket;
+ req->req.actual += len;
+
+ /* if we wrote it all, we're usually done */
+ if (req->req.actual == req->req.length) {
+ if (ep->num == 0) {
+ /* wait for control status */
+ if (mode != 2)
+ req = NULL;
+ } else if (!req->req.zero || len != ep->ep.maxpacket)
+ mode = 2;
+ }
+
+ /* there was nothing to do ... */
+ } else if (mode == 1)
+ return;
+
+ /* done */
+ if (mode == 2) {
+ /* stream endpoints often resubmit/unlink in completion */
+ done (ep, req, 0);
+
+ /* maybe advance queue to next request */
+ if (ep->num == 0) {
+ /* NOTE: net2280 could let gadget driver start the
+ * status stage later. since not all controllers let
+ * them control that, the api doesn't (yet) allow it.
+ */
+ if (!ep->stopped)
+ allow_status (ep);
+ req = NULL;
+ } else {
+ if (!list_empty (&ep->queue) && !ep->stopped)
+ req = list_entry (ep->queue.next,
+ struct net2280_request, queue);
+ else
+ req = NULL;
+ if (req && !ep->is_in)
+ stop_out_naking (ep);
+ }
+ }
+
+ /* is there a buffer for the next packet?
+ * for best streaming performance, make sure there is one.
+ */
+ if (req && !ep->stopped) {
+
+ /* load IN fifo with next packet (may be zlp) */
+ if (t & (1 << DATA_PACKET_TRANSMITTED_INTERRUPT))
+ write_fifo (ep, &req->req);
+ }
+}
+
+static struct net2280_ep *
+get_ep_by_addr (struct net2280 *dev, u16 wIndex)
+{
+ struct net2280_ep *ep;
+
+ if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
+ return &dev->ep [0];
+ list_for_each_entry (ep, &dev->gadget.ep_list, ep.ep_list) {
+ u8 bEndpointAddress;
+
+ if (!ep->desc)
+ continue;
+ bEndpointAddress = ep->desc->bEndpointAddress;
+ if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
+ continue;
+ if ((wIndex & 0x0f) == (bEndpointAddress & 0x0f))
+ return ep;
+ }
+ return NULL;
+}
+
+static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
+{
+ struct net2280_ep *ep;
+ u32 num, scratch;
+
+ /* most of these don't need individual acks */
+ stat &= ~(1 << INTA_ASSERTED);
+ if (!stat)
+ return;
+ // DEBUG (dev, "irqstat0 %04x\n", stat);
+
+ /* starting a control request? */
+ if (unlikely (stat & (1 << SETUP_PACKET_INTERRUPT))) {
+ union {
+ u32 raw [2];
+ struct usb_ctrlrequest r;
+ } u;
+ int tmp = 0;
+ struct net2280_request *req;
+
+ if (dev->gadget.speed == USB_SPEED_UNKNOWN) {
+ if (readl (&dev->usb->usbstat) & (1 << HIGH_SPEED))
+ dev->gadget.speed = USB_SPEED_HIGH;
+ else
+ dev->gadget.speed = USB_SPEED_FULL;
+ net2280_led_speed (dev, dev->gadget.speed);
+ DEBUG (dev, "%s speed\n",
+ (dev->gadget.speed == USB_SPEED_HIGH)
+ ? "high" : "full");
+ }
+
+ ep = &dev->ep [0];
+ ep->irqs++;
+
+ /* make sure any leftover request state is cleared */
+ stat &= ~(1 << ENDPOINT_0_INTERRUPT);
+ while (!list_empty (&ep->queue)) {
+ req = list_entry (ep->queue.next,
+ struct net2280_request, queue);
+ done (ep, req, (req->req.actual == req->req.length)
+ ? 0 : -EPROTO);
+ }
+ ep->stopped = 0;
+ dev->protocol_stall = 0;
+ writel ( (1 << TIMEOUT)
+ | (1 << USB_STALL_SENT)
+ | (1 << USB_IN_NAK_SENT)
+ | (1 << USB_IN_ACK_RCVD)
+ | (1 << USB_OUT_PING_NAK_SENT)
+ | (1 << USB_OUT_ACK_SENT)
+ | (1 << FIFO_OVERFLOW)
+ | (1 << FIFO_UNDERFLOW)
+ | (1 << SHORT_PACKET_OUT_DONE_INTERRUPT)
+ | (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)
+ | (1 << DATA_PACKET_RECEIVED_INTERRUPT)
+ | (1 << DATA_PACKET_TRANSMITTED_INTERRUPT)
+ | (1 << DATA_OUT_PING_TOKEN_INTERRUPT)
+ | (1 << DATA_IN_TOKEN_INTERRUPT)
+ , &ep->regs->ep_stat);
+ u.raw [0] = readl (&dev->usb->setup0123);
+ u.raw [1] = readl (&dev->usb->setup4567);
+
+ cpu_to_le32s (&u.raw [0]);
+ cpu_to_le32s (&u.raw [1]);
+
+ le16_to_cpus (&u.r.wValue);
+ le16_to_cpus (&u.r.wIndex);
+ le16_to_cpus (&u.r.wLength);
+
+ /* ack the irq */
+ writel (1 << SETUP_PACKET_INTERRUPT, &dev->regs->irqstat0);
+ stat ^= (1 << SETUP_PACKET_INTERRUPT);
+
+ /* watch control traffic at the token level, and force
+ * synchronization before letting the status stage happen.
+ * FIXME ignore tokens we'll NAK, until driver responds.
+ * that'll mean a lot less irqs for some drivers.
+ */
+ ep->is_in = (u.r.bRequestType & USB_DIR_IN) != 0;
+ if (ep->is_in) {
+ scratch = (1 << DATA_PACKET_TRANSMITTED_INTERRUPT)
+ | (1 << DATA_OUT_PING_TOKEN_INTERRUPT)
+ | (1 << DATA_IN_TOKEN_INTERRUPT);
+ stop_out_naking (ep);
+ } else
+ scratch = (1 << DATA_PACKET_RECEIVED_INTERRUPT)
+ | (1 << DATA_OUT_PING_TOKEN_INTERRUPT)
+ | (1 << DATA_IN_TOKEN_INTERRUPT);
+ writel (scratch, &dev->epregs [0].ep_irqenb);
+
+ /* we made the hardware handle most lowlevel requests;
+ * everything else goes uplevel to the gadget code.
+ */
+ switch (u.r.bRequest) {
+ case USB_REQ_GET_STATUS: {
+ struct net2280_ep *e;
+ u16 status;
+
+ /* hw handles device and interface status */
+ if (u.r.bRequestType != (USB_DIR_IN|USB_RECIP_ENDPOINT))
+ goto delegate;
+ if ((e = get_ep_by_addr (dev, u.r.wIndex)) == 0
+ || u.r.wLength > 2)
+ goto do_stall;
+
+ if (readl (&e->regs->ep_rsp)
+ & (1 << SET_ENDPOINT_HALT))
+ status = __constant_cpu_to_le16 (1);
+ else
+ status = __constant_cpu_to_le16 (0);
+
+ /* don't bother with a request object! */
+ writel (0, &dev->epregs [0].ep_irqenb);
+ set_fifo_bytecount (ep, u.r.wLength);
+ writel (status, &dev->epregs [0].ep_data);
+ allow_status (ep);
+ VDEBUG (dev, "%s stat %02x\n", ep->ep.name, status);
+ goto next_endpoints;
+ }
+ break;
+ case USB_REQ_CLEAR_FEATURE: {
+ struct net2280_ep *e;
+
+ /* hw handles device features */
+ if (u.r.bRequestType != USB_RECIP_ENDPOINT)
+ goto delegate;
+ if (u.r.wValue != USB_ENDPOINT_HALT
+ || u.r.wLength != 0)
+ goto do_stall;
+ if ((e = get_ep_by_addr (dev, u.r.wIndex)) == 0)
+ goto do_stall;
+ clear_halt (e);
+ allow_status (ep);
+ VDEBUG (dev, "%s clear halt\n", ep->ep.name);
+ goto next_endpoints;
+ }
+ break;
+ case USB_REQ_SET_FEATURE: {
+ struct net2280_ep *e;
+
+ /* hw handles device features */
+ if (u.r.bRequestType != USB_RECIP_ENDPOINT)
+ goto delegate;
+ if (u.r.wValue != USB_ENDPOINT_HALT
+ || u.r.wLength != 0)
+ goto do_stall;
+ if ((e = get_ep_by_addr (dev, u.r.wIndex)) == 0)
+ goto do_stall;
+ set_halt (e);
+ allow_status (ep);
+ VDEBUG (dev, "%s set halt\n", ep->ep.name);
+ goto next_endpoints;
+ }
+ break;
+ default:
+delegate:
+ VDEBUG (dev, "setup %02x.%02x v%04x i%04x "
+ "ep_cfg %08x\n",
+ u.r.bRequestType, u.r.bRequest,
+ u.r.wValue, u.r.wIndex,
+ readl (&ep->regs->ep_cfg));
+ spin_unlock (&dev->lock);
+ tmp = dev->driver->setup (&dev->gadget, &u.r);
+ spin_lock (&dev->lock);
+ }
+
+ /* stall ep0 on error */
+ if (tmp < 0) {
+do_stall:
+ VDEBUG (dev, "req %02x.%02x protocol STALL; stat %d\n",
+ u.r.bRequestType, u.r.bRequest, tmp);
+ dev->protocol_stall = 1;
+ }
+
+ /* some in/out token irq should follow; maybe stall then.
+ * driver must queue a request (even zlp) or halt ep0
+ * before the host times out.
+ */
+ }
+
+next_endpoints:
+ /* endpoint data irq ? */
+ scratch = stat & 0x7f;
+ stat &= ~0x7f;
+ for (num = 0; scratch; num++) {
+ u32 t;
+
+ /* do this endpoint's FIFO and queue need tending? */
+ t = 1 << num;
+ if ((scratch & t) == 0)
+ continue;
+ scratch ^= t;
+
+ ep = &dev->ep [num];
+ handle_ep_small (ep);
+ }
+
+ if (stat)
+ DEBUG (dev, "unhandled irqstat0 %08x\n", stat);
+}
+
+#define DMA_INTERRUPTS ( \
+ (1 << DMA_D_INTERRUPT) \
+ | (1 << DMA_C_INTERRUPT) \
+ | (1 << DMA_B_INTERRUPT) \
+ | (1 << DMA_A_INTERRUPT))
+#define PCI_ERROR_INTERRUPTS ( \
+ (1 << PCI_MASTER_ABORT_RECEIVED_INTERRUPT) \
+ | (1 << PCI_TARGET_ABORT_RECEIVED_INTERRUPT) \
+ | (1 << PCI_RETRY_ABORT_INTERRUPT))
+
+static void handle_stat1_irqs (struct net2280 *dev, u32 stat)
+{
+ struct net2280_ep *ep;
+ u32 tmp, num, mask, scratch;
+
+ /* after disconnect there's nothing else to do! */
+ tmp = (1 << VBUS_INTERRUPT) | (1 << ROOT_PORT_RESET_INTERRUPT);
+ mask = (1 << HIGH_SPEED) | (1 << FULL_SPEED);
+
+ /* VBUS disconnect is indicated by VBUS_PIN and VBUS_INTERRUPT set.
+ * Root Port Reset is indicated by ROOT_PORT_RESET_INTERRRUPT set and
+ * both HIGH_SPEED and FULL_SPEED clear (as ROOT_PORT_RESET_INTERRUPT
+ * only indicates a change in the reset state).
+ */
+ if (stat & tmp) {
+ writel (tmp, &dev->regs->irqstat1);
+ if ((((stat & (1 << ROOT_PORT_RESET_INTERRUPT)) &&
+ ((readl (&dev->usb->usbstat) & mask) == 0))
+ || ((readl (&dev->usb->usbctl) & (1 << VBUS_PIN)) == 0)
+ ) && ( dev->gadget.speed != USB_SPEED_UNKNOWN)) {
+ DEBUG (dev, "disconnect %s\n",
+ dev->driver->driver.name);
+ stop_activity (dev, dev->driver);
+ ep0_start (dev);
+ return;
+ }
+ stat &= ~tmp;
+
+ /* vBUS can bounce ... one of many reasons to ignore the
+ * notion of hotplug events on bus connect/disconnect!
+ */
+ if (!stat)
+ return;
+ }
+
+ /* NOTE: chip stays in PCI D0 state for now, but it could
+ * enter D1 to save more power
+ */
+ tmp = (1 << SUSPEND_REQUEST_CHANGE_INTERRUPT);
+ if (stat & tmp) {
+ writel (tmp, &dev->regs->irqstat1);
+ if (stat & (1 << SUSPEND_REQUEST_INTERRUPT)) {
+ if (dev->driver->suspend)
+ dev->driver->suspend (&dev->gadget);
+ if (!enable_suspend)
+ stat &= ~(1 << SUSPEND_REQUEST_INTERRUPT);
+ } else {
+ if (dev->driver->resume)
+ dev->driver->resume (&dev->gadget);
+ /* at high speed, note erratum 0133 */
+ }
+ stat &= ~tmp;
+ }
+
+ /* clear any other status/irqs */
+ if (stat)
+ writel (stat, &dev->regs->irqstat1);
+
+ /* some status we can just ignore */
+ stat &= ~((1 << CONTROL_STATUS_INTERRUPT)
+ | (1 << SUSPEND_REQUEST_INTERRUPT)
+ | (1 << RESUME_INTERRUPT)
+ | (1 << SOF_INTERRUPT));
+ if (!stat)
+ return;
+ // DEBUG (dev, "irqstat1 %08x\n", stat);
+
+ /* DMA status, for ep-{a,b,c,d} */
+ scratch = stat & DMA_INTERRUPTS;
+ stat &= ~DMA_INTERRUPTS;
+ scratch >>= 9;
+ for (num = 0; scratch; num++) {
+ struct net2280_dma_regs __iomem *dma;
+
+ tmp = 1 << num;
+ if ((tmp & scratch) == 0)
+ continue;
+ scratch ^= tmp;
+
+ ep = &dev->ep [num + 1];
+ dma = ep->dma;
+
+ if (!dma)
+ continue;
+
+ /* clear ep's dma status */
+ tmp = readl (&dma->dmastat);
+ writel (tmp, &dma->dmastat);
+
+ /* chaining should stop on abort, short OUT from fifo,
+ * or (stat0 codepath) short OUT transfer.
+ */
+ if (!use_dma_chaining) {
+ if ((tmp & (1 << DMA_TRANSACTION_DONE_INTERRUPT))
+ == 0) {
+ DEBUG (ep->dev, "%s no xact done? %08x\n",
+ ep->ep.name, tmp);
+ continue;
+ }
+ stop_dma (ep->dma);
+ }
+
+ /* OUT transfers terminate when the data from the
+ * host is in our memory. Process whatever's done.
+ * On this path, we know transfer's last packet wasn't
+ * less than req->length. NAK_OUT_PACKETS may be set,
+ * or the FIFO may already be holding new packets.
+ *
+ * IN transfers can linger in the FIFO for a very
+ * long time ... we ignore that for now, accounting
+ * precisely (like PIO does) needs per-packet irqs
+ */
+ scan_dma_completions (ep);
+
+ /* disable dma on inactive queues; else maybe restart */
+ if (list_empty (&ep->queue)) {
+ if (use_dma_chaining)
+ stop_dma (ep->dma);
+ } else {
+ tmp = readl (&dma->dmactl);
+ if (!use_dma_chaining
+ || (tmp & (1 << DMA_ENABLE)) == 0)
+ restart_dma (ep);
+ else if (ep->is_in && use_dma_chaining) {
+ struct net2280_request *req;
+ u32 dmacount;
+
+ /* the descriptor at the head of the chain
+ * may still have VALID_BIT clear; that's
+ * used to trigger changing DMA_FIFO_VALIDATE
+ * (affects automagic zlp writes).
+ */
+ req = list_entry (ep->queue.next,
+ struct net2280_request, queue);
+ dmacount = req->td->dmacount;
+ dmacount &= __constant_cpu_to_le32 (
+ (1 << VALID_BIT)
+ | DMA_BYTE_COUNT_MASK);
+ if (dmacount && (dmacount & valid_bit) == 0)
+ restart_dma (ep);
+ }
+ }
+ ep->irqs++;
+ }
+
+ /* NOTE: there are other PCI errors we might usefully notice.
+ * if they appear very often, here's where to try recovering.
+ */
+ if (stat & PCI_ERROR_INTERRUPTS) {
+ ERROR (dev, "pci dma error; stat %08x\n", stat);
+ stat &= ~PCI_ERROR_INTERRUPTS;
+ /* these are fatal errors, but "maybe" they won't
+ * happen again ...
+ */
+ stop_activity (dev, dev->driver);
+ ep0_start (dev);
+ stat = 0;
+ }
+
+ if (stat)
+ DEBUG (dev, "unhandled irqstat1 %08x\n", stat);
+}
+
+static irqreturn_t net2280_irq (int irq, void *_dev, struct pt_regs * r)
+{
+ struct net2280 *dev = _dev;
+
+ spin_lock (&dev->lock);
+
+ /* handle disconnect, dma, and more */
+ handle_stat1_irqs (dev, readl (&dev->regs->irqstat1));
+
+ /* control requests and PIO */
+ handle_stat0_irqs (dev, readl (&dev->regs->irqstat0));
+
+ spin_unlock (&dev->lock);
+
+ return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void gadget_release (struct device *_dev)
+{
+ struct net2280 *dev = dev_get_drvdata (_dev);
+
+ kfree (dev);
+}
+
+/* tear down the binding between this driver and the pci device */
+
+static void net2280_remove (struct pci_dev *pdev)
+{
+ struct net2280 *dev = pci_get_drvdata (pdev);
+
+ /* start with the driver above us */
+ if (dev->driver) {
+ /* should have been done already by driver model core */
+ WARN (dev, "pci remove, driver '%s' is still registered\n",
+ dev->driver->driver.name);
+ usb_gadget_unregister_driver (dev->driver);
+ }
+
+ /* then clean up the resources we allocated during probe() */
+ net2280_led_shutdown (dev);
+ if (dev->requests) {
+ int i;
+ for (i = 1; i < 5; i++) {
+ if (!dev->ep [i].dummy)
+ continue;
+ pci_pool_free (dev->requests, dev->ep [i].dummy,
+ dev->ep [i].td_dma);
+ }
+ pci_pool_destroy (dev->requests);
+ }
+ if (dev->got_irq)
+ free_irq (pdev->irq, dev);
+ if (dev->regs)
+ iounmap (dev->regs);
+ if (dev->region)
+ release_mem_region (pci_resource_start (pdev, 0),
+ pci_resource_len (pdev, 0));
+ if (dev->enabled)
+ pci_disable_device (pdev);
+ device_unregister (&dev->gadget.dev);
+ device_remove_file (&pdev->dev, &dev_attr_registers);
+ pci_set_drvdata (pdev, NULL);
+
+ INFO (dev, "unbind\n");
+
+ the_controller = NULL;
+}
+
+/* wrap this driver around the specified device, but
+ * don't respond over USB until a gadget driver binds to us.
+ */
+
+static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct net2280 *dev;
+ unsigned long resource, len;
+ void __iomem *base = NULL;
+ int retval, i;
+ char buf [8], *bufp;
+
+ /* if you want to support more than one controller in a system,
+ * usb_gadget_driver_{register,unregister}() must change.
+ */
+ if (the_controller) {
+ dev_warn (&pdev->dev, "ignoring\n");
+ return -EBUSY;
+ }
+
+ /* alloc, and start init */
+ dev = kmalloc (sizeof *dev, SLAB_KERNEL);
+ if (dev == NULL){
+ retval = -ENOMEM;
+ goto done;
+ }
+
+ memset (dev, 0, sizeof *dev);
+ spin_lock_init (&dev->lock);
+ dev->pdev = pdev;
+ dev->gadget.ops = &net2280_ops;
+ dev->gadget.is_dualspeed = 1;
+
+ /* the "gadget" abstracts/virtualizes the controller */
+ strcpy (dev->gadget.dev.bus_id, "gadget");
+ dev->gadget.dev.parent = &pdev->dev;
+ dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
+ dev->gadget.dev.release = gadget_release;
+ dev->gadget.name = driver_name;
+
+ /* now all the pci goodies ... */
+ if (pci_enable_device (pdev) < 0) {
+ retval = -ENODEV;
+ goto done;
+ }
+ dev->enabled = 1;
+
+ /* BAR 0 holds all the registers
+ * BAR 1 is 8051 memory; unused here (note erratum 0103)
+ * BAR 2 is fifo memory; unused here
+ */
+ resource = pci_resource_start (pdev, 0);
+ len = pci_resource_len (pdev, 0);
+ if (!request_mem_region (resource, len, driver_name)) {
+ DEBUG (dev, "controller already in use\n");
+ retval = -EBUSY;
+ goto done;
+ }
+ dev->region = 1;
+
+ base = ioremap_nocache (resource, len);
+ if (base == NULL) {
+ DEBUG (dev, "can't map memory\n");
+ retval = -EFAULT;
+ goto done;
+ }
+ dev->regs = (struct net2280_regs __iomem *) base;
+ dev->usb = (struct net2280_usb_regs __iomem *) (base + 0x0080);
+ dev->pci = (struct net2280_pci_regs __iomem *) (base + 0x0100);
+ dev->dma = (struct net2280_dma_regs __iomem *) (base + 0x0180);
+ dev->dep = (struct net2280_dep_regs __iomem *) (base + 0x0200);
+ dev->epregs = (struct net2280_ep_regs __iomem *) (base + 0x0300);
+
+ /* put into initial config, link up all endpoints */
+ writel (0, &dev->usb->usbctl);
+ usb_reset (dev);
+ usb_reinit (dev);
+
+ /* irq setup after old hardware is cleaned up */
+ if (!pdev->irq) {
+ ERROR (dev, "No IRQ. Check PCI setup!\n");
+ retval = -ENODEV;
+ goto done;
+ }
+#ifndef __sparc__
+ scnprintf (buf, sizeof buf, "%d", pdev->irq);
+ bufp = buf;
+#else
+ bufp = __irq_itoa(pdev->irq);
+#endif
+ if (request_irq (pdev->irq, net2280_irq, SA_SHIRQ, driver_name, dev)
+ != 0) {
+ ERROR (dev, "request interrupt %s failed\n", bufp);
+ retval = -EBUSY;
+ goto done;
+ }
+ dev->got_irq = 1;
+
+ /* DMA setup */
+ /* NOTE: we know only the 32 LSBs of dma addresses may be nonzero */
+ dev->requests = pci_pool_create ("requests", pdev,
+ sizeof (struct net2280_dma),
+ 0 /* no alignment requirements */,
+ 0 /* or page-crossing issues */);
+ if (!dev->requests) {
+ DEBUG (dev, "can't get request pool\n");
+ retval = -ENOMEM;
+ goto done;
+ }
+ for (i = 1; i < 5; i++) {
+ struct net2280_dma *td;
+
+ td = pci_pool_alloc (dev->requests, GFP_KERNEL,
+ &dev->ep [i].td_dma);
+ if (!td) {
+ DEBUG (dev, "can't get dummy %d\n", i);
+ retval = -ENOMEM;
+ goto done;
+ }
+ td->dmacount = 0; /* not VALID */
+ td->dmaaddr = __constant_cpu_to_le32 (DMA_ADDR_INVALID);
+ td->dmadesc = td->dmaaddr;
+ dev->ep [i].dummy = td;
+ }
+
+ /* enable lower-overhead pci memory bursts during DMA */
+ writel ( (1 << DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE)
+ // 256 write retries may not be enough...
+ // | (1 << PCI_RETRY_ABORT_ENABLE)
+ | (1 << DMA_READ_MULTIPLE_ENABLE)
+ | (1 << DMA_READ_LINE_ENABLE)
+ , &dev->pci->pcimstctl);
+ /* erratum 0115 shouldn't appear: Linux inits PCI_LATENCY_TIMER */
+ pci_set_master (pdev);
+ pci_set_mwi (pdev);
+
+ /* ... also flushes any posted pci writes */
+ dev->chiprev = get_idx_reg (dev->regs, REG_CHIPREV) & 0xffff;
+
+ /* done */
+ pci_set_drvdata (pdev, dev);
+ INFO (dev, "%s\n", driver_desc);
+ INFO (dev, "irq %s, pci mem %p, chip rev %04x\n",
+ bufp, base, dev->chiprev);
+ INFO (dev, "version: " DRIVER_VERSION "; dma %s\n",
+ use_dma
+ ? (use_dma_chaining ? "chaining" : "enabled")
+ : "disabled");
+ the_controller = dev;
+
+ device_register (&dev->gadget.dev);
+ device_create_file (&pdev->dev, &dev_attr_registers);
+
+ return 0;
+
+done:
+ if (dev)
+ net2280_remove (pdev);
+ return retval;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static struct pci_device_id pci_ids [] = { {
+ .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
+ .class_mask = ~0,
+ .vendor = 0x17cc,
+ .device = 0x2280,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+
+}, { /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE (pci, pci_ids);
+
+/* pci driver glue; this is a "new style" PCI driver module */
+static struct pci_driver net2280_pci_driver = {
+ .name = (char *) driver_name,
+ .id_table = pci_ids,
+
+ .probe = net2280_probe,
+ .remove = net2280_remove,
+
+ /* FIXME add power management support */
+};
+
+MODULE_DESCRIPTION (DRIVER_DESC);
+MODULE_AUTHOR ("David Brownell");
+MODULE_LICENSE ("GPL");
+
+static int __init init (void)
+{
+ if (!use_dma)
+ use_dma_chaining = 0;
+ return pci_register_driver (&net2280_pci_driver);
+}
+module_init (init);
+
+static void __exit cleanup (void)
+{
+ pci_unregister_driver (&net2280_pci_driver);
+}
+module_exit (cleanup);
diff --git a/drivers/usb/gadget/net2280.h b/drivers/usb/gadget/net2280.h
new file mode 100644
index 00000000000..fff4509cf34
--- /dev/null
+++ b/drivers/usb/gadget/net2280.h
@@ -0,0 +1,728 @@
+/*
+ * NetChip 2280 high/full speed USB device controller.
+ * Unlike many such controllers, this one talks PCI.
+ */
+
+/*
+ * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com)
+ * Copyright (C) 2003 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*-------------------------------------------------------------------------*/
+
+/* NET2280 MEMORY MAPPED REGISTERS
+ *
+ * The register layout came from the chip documentation, and the bit
+ * number definitions were extracted from chip specification.
+ *
+ * Use the shift operator ('<<') to build bit masks, with readl/writel
+ * to access the registers through PCI.
+ */
+
+/* main registers, BAR0 + 0x0000 */
+struct net2280_regs {
+ // offset 0x0000
+ u32 devinit;
+#define LOCAL_CLOCK_FREQUENCY 8
+#define FORCE_PCI_RESET 7
+#define PCI_ID 6
+#define PCI_ENABLE 5
+#define FIFO_SOFT_RESET 4
+#define CFG_SOFT_RESET 3
+#define PCI_SOFT_RESET 2
+#define USB_SOFT_RESET 1
+#define M8051_RESET 0
+ u32 eectl;
+#define EEPROM_ADDRESS_WIDTH 23
+#define EEPROM_CHIP_SELECT_ACTIVE 22
+#define EEPROM_PRESENT 21
+#define EEPROM_VALID 20
+#define EEPROM_BUSY 19
+#define EEPROM_CHIP_SELECT_ENABLE 18
+#define EEPROM_BYTE_READ_START 17
+#define EEPROM_BYTE_WRITE_START 16
+#define EEPROM_READ_DATA 8
+#define EEPROM_WRITE_DATA 0
+ u32 eeclkfreq;
+ u32 _unused0;
+ // offset 0x0010
+
+ u32 pciirqenb0; /* interrupt PCI master ... */
+#define SETUP_PACKET_INTERRUPT_ENABLE 7
+#define ENDPOINT_F_INTERRUPT_ENABLE 6
+#define ENDPOINT_E_INTERRUPT_ENABLE 5
+#define ENDPOINT_D_INTERRUPT_ENABLE 4
+#define ENDPOINT_C_INTERRUPT_ENABLE 3
+#define ENDPOINT_B_INTERRUPT_ENABLE 2
+#define ENDPOINT_A_INTERRUPT_ENABLE 1
+#define ENDPOINT_0_INTERRUPT_ENABLE 0
+ u32 pciirqenb1;
+#define PCI_INTERRUPT_ENABLE 31
+#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27
+#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26
+#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25
+#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20
+#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19
+#define PCI_TARGET_ABORT_ASSERTED_INTERRUPT_ENABLE 18
+#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17
+#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16
+#define GPIO_INTERRUPT_ENABLE 13
+#define DMA_D_INTERRUPT_ENABLE 12
+#define DMA_C_INTERRUPT_ENABLE 11
+#define DMA_B_INTERRUPT_ENABLE 10
+#define DMA_A_INTERRUPT_ENABLE 9
+#define EEPROM_DONE_INTERRUPT_ENABLE 8
+#define VBUS_INTERRUPT_ENABLE 7
+#define CONTROL_STATUS_INTERRUPT_ENABLE 6
+#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4
+#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3
+#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2
+#define RESUME_INTERRUPT_ENABLE 1
+#define SOF_INTERRUPT_ENABLE 0
+ u32 cpu_irqenb0; /* ... or onboard 8051 */
+#define SETUP_PACKET_INTERRUPT_ENABLE 7
+#define ENDPOINT_F_INTERRUPT_ENABLE 6
+#define ENDPOINT_E_INTERRUPT_ENABLE 5
+#define ENDPOINT_D_INTERRUPT_ENABLE 4
+#define ENDPOINT_C_INTERRUPT_ENABLE 3
+#define ENDPOINT_B_INTERRUPT_ENABLE 2
+#define ENDPOINT_A_INTERRUPT_ENABLE 1
+#define ENDPOINT_0_INTERRUPT_ENABLE 0
+ u32 cpu_irqenb1;
+#define CPU_INTERRUPT_ENABLE 31
+#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27
+#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26
+#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25
+#define PCI_INTA_INTERRUPT_ENABLE 24
+#define PCI_PME_INTERRUPT_ENABLE 23
+#define PCI_SERR_INTERRUPT_ENABLE 22
+#define PCI_PERR_INTERRUPT_ENABLE 21
+#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20
+#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19
+#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17
+#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16
+#define GPIO_INTERRUPT_ENABLE 13
+#define DMA_D_INTERRUPT_ENABLE 12
+#define DMA_C_INTERRUPT_ENABLE 11
+#define DMA_B_INTERRUPT_ENABLE 10
+#define DMA_A_INTERRUPT_ENABLE 9
+#define EEPROM_DONE_INTERRUPT_ENABLE 8
+#define VBUS_INTERRUPT_ENABLE 7
+#define CONTROL_STATUS_INTERRUPT_ENABLE 6
+#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4
+#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3
+#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2
+#define RESUME_INTERRUPT_ENABLE 1
+#define SOF_INTERRUPT_ENABLE 0
+
+ // offset 0x0020
+ u32 _unused1;
+ u32 usbirqenb1;
+#define USB_INTERRUPT_ENABLE 31
+#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27
+#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26
+#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25
+#define PCI_INTA_INTERRUPT_ENABLE 24
+#define PCI_PME_INTERRUPT_ENABLE 23
+#define PCI_SERR_INTERRUPT_ENABLE 22
+#define PCI_PERR_INTERRUPT_ENABLE 21
+#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20
+#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19
+#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17
+#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16
+#define GPIO_INTERRUPT_ENABLE 13
+#define DMA_D_INTERRUPT_ENABLE 12
+#define DMA_C_INTERRUPT_ENABLE 11
+#define DMA_B_INTERRUPT_ENABLE 10
+#define DMA_A_INTERRUPT_ENABLE 9
+#define EEPROM_DONE_INTERRUPT_ENABLE 8
+#define VBUS_INTERRUPT_ENABLE 7
+#define CONTROL_STATUS_INTERRUPT_ENABLE 6
+#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4
+#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3
+#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2
+#define RESUME_INTERRUPT_ENABLE 1
+#define SOF_INTERRUPT_ENABLE 0
+ u32 irqstat0;
+#define INTA_ASSERTED 12
+#define SETUP_PACKET_INTERRUPT 7
+#define ENDPOINT_F_INTERRUPT 6
+#define ENDPOINT_E_INTERRUPT 5
+#define ENDPOINT_D_INTERRUPT 4
+#define ENDPOINT_C_INTERRUPT 3
+#define ENDPOINT_B_INTERRUPT 2
+#define ENDPOINT_A_INTERRUPT 1
+#define ENDPOINT_0_INTERRUPT 0
+ u32 irqstat1;
+#define POWER_STATE_CHANGE_INTERRUPT 27
+#define PCI_ARBITER_TIMEOUT_INTERRUPT 26
+#define PCI_PARITY_ERROR_INTERRUPT 25
+#define PCI_INTA_INTERRUPT 24
+#define PCI_PME_INTERRUPT 23
+#define PCI_SERR_INTERRUPT 22
+#define PCI_PERR_INTERRUPT 21
+#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT 20
+#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT 19
+#define PCI_RETRY_ABORT_INTERRUPT 17
+#define PCI_MASTER_CYCLE_DONE_INTERRUPT 16
+#define GPIO_INTERRUPT 13
+#define DMA_D_INTERRUPT 12
+#define DMA_C_INTERRUPT 11
+#define DMA_B_INTERRUPT 10
+#define DMA_A_INTERRUPT 9
+#define EEPROM_DONE_INTERRUPT 8
+#define VBUS_INTERRUPT 7
+#define CONTROL_STATUS_INTERRUPT 6
+#define ROOT_PORT_RESET_INTERRUPT 4
+#define SUSPEND_REQUEST_INTERRUPT 3
+#define SUSPEND_REQUEST_CHANGE_INTERRUPT 2
+#define RESUME_INTERRUPT 1
+#define SOF_INTERRUPT 0
+ // offset 0x0030
+ u32 idxaddr;
+ u32 idxdata;
+ u32 fifoctl;
+#define PCI_BASE2_RANGE 16
+#define IGNORE_FIFO_AVAILABILITY 3
+#define PCI_BASE2_SELECT 2
+#define FIFO_CONFIGURATION_SELECT 0
+ u32 _unused2;
+ // offset 0x0040
+ u32 memaddr;
+#define START 28
+#define DIRECTION 27
+#define FIFO_DIAGNOSTIC_SELECT 24
+#define MEMORY_ADDRESS 0
+ u32 memdata0;
+ u32 memdata1;
+ u32 _unused3;
+ // offset 0x0050
+ u32 gpioctl;
+#define GPIO3_LED_SELECT 12
+#define GPIO3_INTERRUPT_ENABLE 11
+#define GPIO2_INTERRUPT_ENABLE 10
+#define GPIO1_INTERRUPT_ENABLE 9
+#define GPIO0_INTERRUPT_ENABLE 8
+#define GPIO3_OUTPUT_ENABLE 7
+#define GPIO2_OUTPUT_ENABLE 6
+#define GPIO1_OUTPUT_ENABLE 5
+#define GPIO0_OUTPUT_ENABLE 4
+#define GPIO3_DATA 3
+#define GPIO2_DATA 2
+#define GPIO1_DATA 1
+#define GPIO0_DATA 0
+ u32 gpiostat;
+#define GPIO3_INTERRUPT 3
+#define GPIO2_INTERRUPT 2
+#define GPIO1_INTERRUPT 1
+#define GPIO0_INTERRUPT 0
+} __attribute__ ((packed));
+
+/* usb control, BAR0 + 0x0080 */
+struct net2280_usb_regs {
+ // offset 0x0080
+ u32 stdrsp;
+#define STALL_UNSUPPORTED_REQUESTS 31
+#define SET_TEST_MODE 16
+#define GET_OTHER_SPEED_CONFIGURATION 15
+#define GET_DEVICE_QUALIFIER 14
+#define SET_ADDRESS 13
+#define ENDPOINT_SET_CLEAR_HALT 12
+#define DEVICE_SET_CLEAR_DEVICE_REMOTE_WAKEUP 11
+#define GET_STRING_DESCRIPTOR_2 10
+#define GET_STRING_DESCRIPTOR_1 9
+#define GET_STRING_DESCRIPTOR_0 8
+#define GET_SET_INTERFACE 6
+#define GET_SET_CONFIGURATION 5
+#define GET_CONFIGURATION_DESCRIPTOR 4
+#define GET_DEVICE_DESCRIPTOR 3
+#define GET_ENDPOINT_STATUS 2
+#define GET_INTERFACE_STATUS 1
+#define GET_DEVICE_STATUS 0
+ u32 prodvendid;
+#define PRODUCT_ID 16
+#define VENDOR_ID 0
+ u32 relnum;
+ u32 usbctl;
+#define SERIAL_NUMBER_INDEX 16
+#define PRODUCT_ID_STRING_ENABLE 13
+#define VENDOR_ID_STRING_ENABLE 12
+#define USB_ROOT_PORT_WAKEUP_ENABLE 11
+#define VBUS_PIN 10
+#define TIMED_DISCONNECT 9
+#define SUSPEND_IMMEDIATELY 7
+#define SELF_POWERED_USB_DEVICE 6
+#define REMOTE_WAKEUP_SUPPORT 5
+#define PME_POLARITY 4
+#define USB_DETECT_ENABLE 3
+#define PME_WAKEUP_ENABLE 2
+#define DEVICE_REMOTE_WAKEUP_ENABLE 1
+#define SELF_POWERED_STATUS 0
+ // offset 0x0090
+ u32 usbstat;
+#define HIGH_SPEED 7
+#define FULL_SPEED 6
+#define GENERATE_RESUME 5
+#define GENERATE_DEVICE_REMOTE_WAKEUP 4
+ u32 xcvrdiag;
+#define FORCE_HIGH_SPEED_MODE 31
+#define FORCE_FULL_SPEED_MODE 30
+#define USB_TEST_MODE 24
+#define LINE_STATE 16
+#define TRANSCEIVER_OPERATION_MODE 2
+#define TRANSCEIVER_SELECT 1
+#define TERMINATION_SELECT 0
+ u32 setup0123;
+ u32 setup4567;
+ // offset 0x0090
+ u32 _unused0;
+ u32 ouraddr;
+#define FORCE_IMMEDIATE 7
+#define OUR_USB_ADDRESS 0
+ u32 ourconfig;
+} __attribute__ ((packed));
+
+/* pci control, BAR0 + 0x0100 */
+struct net2280_pci_regs {
+ // offset 0x0100
+ u32 pcimstctl;
+#define PCI_ARBITER_PARK_SELECT 13
+#define PCI_MULTI LEVEL_ARBITER 12
+#define PCI_RETRY_ABORT_ENABLE 11
+#define DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE 10
+#define DMA_READ_MULTIPLE_ENABLE 9
+#define DMA_READ_LINE_ENABLE 8
+#define PCI_MASTER_COMMAND_SELECT 6
+#define MEM_READ_OR_WRITE 0
+#define IO_READ_OR_WRITE 1
+#define CFG_READ_OR_WRITE 2
+#define PCI_MASTER_START 5
+#define PCI_MASTER_READ_WRITE 4
+#define PCI_MASTER_WRITE 0
+#define PCI_MASTER_READ 1
+#define PCI_MASTER_BYTE_WRITE_ENABLES 0
+ u32 pcimstaddr;
+ u32 pcimstdata;
+ u32 pcimststat;
+#define PCI_ARBITER_CLEAR 2
+#define PCI_EXTERNAL_ARBITER 1
+#define PCI_HOST_MODE 0
+} __attribute__ ((packed));
+
+/* dma control, BAR0 + 0x0180 ... array of four structs like this,
+ * for channels 0..3. see also struct net2280_dma: descriptor
+ * that can be loaded into some of these registers.
+ */
+struct net2280_dma_regs { /* [11.7] */
+ // offset 0x0180, 0x01a0, 0x01c0, 0x01e0,
+ u32 dmactl;
+#define DMA_SCATTER_GATHER_DONE_INTERRUPT_ENABLE 25
+#define DMA_CLEAR_COUNT_ENABLE 21
+#define DESCRIPTOR_POLLING_RATE 19
+#define POLL_CONTINUOUS 0
+#define POLL_1_USEC 1
+#define POLL_100_USEC 2
+#define POLL_1_MSEC 3
+#define DMA_VALID_BIT_POLLING_ENABLE 18
+#define DMA_VALID_BIT_ENABLE 17
+#define DMA_SCATTER_GATHER_ENABLE 16
+#define DMA_OUT_AUTO_START_ENABLE 4
+#define DMA_PREEMPT_ENABLE 3
+#define DMA_FIFO_VALIDATE 2
+#define DMA_ENABLE 1
+#define DMA_ADDRESS_HOLD 0
+ u32 dmastat;
+#define DMA_SCATTER_GATHER_DONE_INTERRUPT 25
+#define DMA_TRANSACTION_DONE_INTERRUPT 24
+#define DMA_ABORT 1
+#define DMA_START 0
+ u32 _unused0 [2];
+ // offset 0x0190, 0x01b0, 0x01d0, 0x01f0,
+ u32 dmacount;
+#define VALID_BIT 31
+#define DMA_DIRECTION 30
+#define DMA_DONE_INTERRUPT_ENABLE 29
+#define END_OF_CHAIN 28
+#define DMA_BYTE_COUNT_MASK ((1<<24)-1)
+#define DMA_BYTE_COUNT 0
+ u32 dmaaddr;
+ u32 dmadesc;
+ u32 _unused1;
+} __attribute__ ((packed));
+
+/* dedicated endpoint registers, BAR0 + 0x0200 */
+
+struct net2280_dep_regs { /* [11.8] */
+ // offset 0x0200, 0x0210, 0x220, 0x230, 0x240
+ u32 dep_cfg;
+ // offset 0x0204, 0x0214, 0x224, 0x234, 0x244
+ u32 dep_rsp;
+ u32 _unused [2];
+} __attribute__ ((packed));
+
+/* configurable endpoint registers, BAR0 + 0x0300 ... array of seven structs
+ * like this, for ep0 then the configurable endpoints A..F
+ * ep0 reserved for control; E and F have only 64 bytes of fifo
+ */
+struct net2280_ep_regs { /* [11.9] */
+ // offset 0x0300, 0x0320, 0x0340, 0x0360, 0x0380, 0x03a0, 0x03c0
+ u32 ep_cfg;
+#define ENDPOINT_BYTE_COUNT 16
+#define ENDPOINT_ENABLE 10
+#define ENDPOINT_TYPE 8
+#define ENDPOINT_DIRECTION 7
+#define ENDPOINT_NUMBER 0
+ u32 ep_rsp;
+#define SET_NAK_OUT_PACKETS 15
+#define SET_EP_HIDE_STATUS_PHASE 14
+#define SET_EP_FORCE_CRC_ERROR 13
+#define SET_INTERRUPT_MODE 12
+#define SET_CONTROL_STATUS_PHASE_HANDSHAKE 11
+#define SET_NAK_OUT_PACKETS_MODE 10
+#define SET_ENDPOINT_TOGGLE 9
+#define SET_ENDPOINT_HALT 8
+#define CLEAR_NAK_OUT_PACKETS 7
+#define CLEAR_EP_HIDE_STATUS_PHASE 6
+#define CLEAR_EP_FORCE_CRC_ERROR 5
+#define CLEAR_INTERRUPT_MODE 4
+#define CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE 3
+#define CLEAR_NAK_OUT_PACKETS_MODE 2
+#define CLEAR_ENDPOINT_TOGGLE 1
+#define CLEAR_ENDPOINT_HALT 0
+ u32 ep_irqenb;
+#define SHORT_PACKET_OUT_DONE_INTERRUPT_ENABLE 6
+#define SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE 5
+#define DATA_PACKET_RECEIVED_INTERRUPT_ENABLE 3
+#define DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE 2
+#define DATA_OUT_PING_TOKEN_INTERRUPT_ENABLE 1
+#define DATA_IN_TOKEN_INTERRUPT_ENABLE 0
+ u32 ep_stat;
+#define FIFO_VALID_COUNT 24
+#define HIGH_BANDWIDTH_OUT_TRANSACTION_PID 22
+#define TIMEOUT 21
+#define USB_STALL_SENT 20
+#define USB_IN_NAK_SENT 19
+#define USB_IN_ACK_RCVD 18
+#define USB_OUT_PING_NAK_SENT 17
+#define USB_OUT_ACK_SENT 16
+#define FIFO_OVERFLOW 13
+#define FIFO_UNDERFLOW 12
+#define FIFO_FULL 11
+#define FIFO_EMPTY 10
+#define FIFO_FLUSH 9
+#define SHORT_PACKET_OUT_DONE_INTERRUPT 6
+#define SHORT_PACKET_TRANSFERRED_INTERRUPT 5
+#define NAK_OUT_PACKETS 4
+#define DATA_PACKET_RECEIVED_INTERRUPT 3
+#define DATA_PACKET_TRANSMITTED_INTERRUPT 2
+#define DATA_OUT_PING_TOKEN_INTERRUPT 1
+#define DATA_IN_TOKEN_INTERRUPT 0
+ // offset 0x0310, 0x0330, 0x0350, 0x0370, 0x0390, 0x03b0, 0x03d0
+ u32 ep_avail;
+ u32 ep_data;
+ u32 _unused0 [2];
+} __attribute__ ((packed));
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef __KERNEL__
+
+/* indexed registers [11.10] are accessed indirectly
+ * caller must own the device lock.
+ */
+
+static inline u32
+get_idx_reg (struct net2280_regs __iomem *regs, u32 index)
+{
+ writel (index, &regs->idxaddr);
+ /* NOTE: synchs device/cpu memory views */
+ return readl (&regs->idxdata);
+}
+
+static inline void
+set_idx_reg (struct net2280_regs __iomem *regs, u32 index, u32 value)
+{
+ writel (index, &regs->idxaddr);
+ writel (value, &regs->idxdata);
+ /* posted, may not be visible yet */
+}
+
+#endif /* __KERNEL__ */
+
+
+#define REG_DIAG 0x0
+#define RETRY_COUNTER 16
+#define FORCE_PCI_SERR 11
+#define FORCE_PCI_INTERRUPT 10
+#define FORCE_USB_INTERRUPT 9
+#define FORCE_CPU_INTERRUPT 8
+#define ILLEGAL_BYTE_ENABLES 5
+#define FAST_TIMES 4
+#define FORCE_RECEIVE_ERROR 2
+#define FORCE_TRANSMIT_CRC_ERROR 0
+#define REG_FRAME 0x02 /* from last sof */
+#define REG_CHIPREV 0x03 /* in bcd */
+#define REG_HS_NAK_RATE 0x0a /* NAK per N uframes */
+
+#define CHIPREV_1 0x0100
+#define CHIPREV_1A 0x0110
+
+#ifdef __KERNEL__
+
+/* ep a-f highspeed and fullspeed maxpacket, addresses
+ * computed from ep->num
+ */
+#define REG_EP_MAXPKT(dev,num) (((num) + 1) * 0x10 + \
+ (((dev)->gadget.speed == USB_SPEED_HIGH) ? 0 : 1))
+
+/*-------------------------------------------------------------------------*/
+
+/* [8.3] for scatter/gather i/o
+ * use struct net2280_dma_regs bitfields
+ */
+struct net2280_dma {
+ __le32 dmacount;
+ __le32 dmaaddr; /* the buffer */
+ __le32 dmadesc; /* next dma descriptor */
+ __le32 _reserved;
+} __attribute__ ((aligned (16)));
+
+/*-------------------------------------------------------------------------*/
+
+/* DRIVER DATA STRUCTURES and UTILITIES */
+
+struct net2280_ep {
+ struct usb_ep ep;
+ struct net2280_ep_regs __iomem *regs;
+ struct net2280_dma_regs __iomem *dma;
+ struct net2280_dma *dummy;
+ dma_addr_t td_dma; /* of dummy */
+ struct net2280 *dev;
+ unsigned long irqs;
+
+ /* analogous to a host-side qh */
+ struct list_head queue;
+ const struct usb_endpoint_descriptor *desc;
+ unsigned num : 8,
+ fifo_size : 12,
+ in_fifo_validate : 1,
+ out_overflow : 1,
+ stopped : 1,
+ is_in : 1,
+ is_iso : 1;
+};
+
+static inline void allow_status (struct net2280_ep *ep)
+{
+ /* ep0 only */
+ writel ( (1 << CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE)
+ | (1 << CLEAR_NAK_OUT_PACKETS)
+ | (1 << CLEAR_NAK_OUT_PACKETS_MODE)
+ , &ep->regs->ep_rsp);
+ ep->stopped = 1;
+}
+
+/* count (<= 4) bytes in the next fifo write will be valid */
+static inline void set_fifo_bytecount (struct net2280_ep *ep, unsigned count)
+{
+ writeb (count, 2 + (u8 __iomem *) &ep->regs->ep_cfg);
+}
+
+struct net2280_request {
+ struct usb_request req;
+ struct net2280_dma *td;
+ dma_addr_t td_dma;
+ struct list_head queue;
+ unsigned mapped : 1,
+ valid : 1;
+};
+
+struct net2280 {
+ /* each pci device provides one gadget, several endpoints */
+ struct usb_gadget gadget;
+ spinlock_t lock;
+ struct net2280_ep ep [7];
+ struct usb_gadget_driver *driver;
+ unsigned enabled : 1,
+ protocol_stall : 1,
+ softconnect : 1,
+ got_irq : 1,
+ region : 1;
+ u16 chiprev;
+
+ /* pci state used to access those endpoints */
+ struct pci_dev *pdev;
+ struct net2280_regs __iomem *regs;
+ struct net2280_usb_regs __iomem *usb;
+ struct net2280_pci_regs __iomem *pci;
+ struct net2280_dma_regs __iomem *dma;
+ struct net2280_dep_regs __iomem *dep;
+ struct net2280_ep_regs __iomem *epregs;
+
+ struct pci_pool *requests;
+ // statistics...
+};
+
+static inline void set_halt (struct net2280_ep *ep)
+{
+ /* ep0 and bulk/intr endpoints */
+ writel ( (1 << CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE)
+ /* set NAK_OUT for erratum 0114 */
+ | ((ep->dev->chiprev == CHIPREV_1) << SET_NAK_OUT_PACKETS)
+ | (1 << SET_ENDPOINT_HALT)
+ , &ep->regs->ep_rsp);
+}
+
+static inline void clear_halt (struct net2280_ep *ep)
+{
+ /* ep0 and bulk/intr endpoints */
+ writel ( (1 << CLEAR_ENDPOINT_HALT)
+ | (1 << CLEAR_ENDPOINT_TOGGLE)
+ /* unless the gadget driver left a short packet in the
+ * fifo, this reverses the erratum 0114 workaround.
+ */
+ | ((ep->dev->chiprev == CHIPREV_1) << CLEAR_NAK_OUT_PACKETS)
+ , &ep->regs->ep_rsp);
+}
+
+#ifdef USE_RDK_LEDS
+
+static inline void net2280_led_init (struct net2280 *dev)
+{
+ /* LED3 (green) is on during USB activity. note erratum 0113. */
+ writel ((1 << GPIO3_LED_SELECT)
+ | (1 << GPIO3_OUTPUT_ENABLE)
+ | (1 << GPIO2_OUTPUT_ENABLE)
+ | (1 << GPIO1_OUTPUT_ENABLE)
+ | (1 << GPIO0_OUTPUT_ENABLE)
+ , &dev->regs->gpioctl);
+}
+
+/* indicate speed with bi-color LED 0/1 */
+static inline
+void net2280_led_speed (struct net2280 *dev, enum usb_device_speed speed)
+{
+ u32 val = readl (&dev->regs->gpioctl);
+ switch (speed) {
+ case USB_SPEED_HIGH: /* green */
+ val &= ~(1 << GPIO0_DATA);
+ val |= (1 << GPIO1_DATA);
+ break;
+ case USB_SPEED_FULL: /* red */
+ val &= ~(1 << GPIO1_DATA);
+ val |= (1 << GPIO0_DATA);
+ break;
+ default: /* (off/black) */
+ val &= ~((1 << GPIO1_DATA) | (1 << GPIO0_DATA));
+ break;
+ }
+ writel (val, &dev->regs->gpioctl);
+}
+
+/* indicate power with LED 2 */
+static inline void net2280_led_active (struct net2280 *dev, int is_active)
+{
+ u32 val = readl (&dev->regs->gpioctl);
+
+ // FIXME this LED never seems to turn on.
+ if (is_active)
+ val |= GPIO2_DATA;
+ else
+ val &= ~GPIO2_DATA;
+ writel (val, &dev->regs->gpioctl);
+}
+static inline void net2280_led_shutdown (struct net2280 *dev)
+{
+ /* turn off all four GPIO*_DATA bits */
+ writel (readl (&dev->regs->gpioctl) & ~0x0f,
+ &dev->regs->gpioctl);
+}
+
+#else
+
+#define net2280_led_init(dev) do { } while (0)
+#define net2280_led_speed(dev, speed) do { } while (0)
+#define net2280_led_shutdown(dev) do { } while (0)
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#define xprintk(dev,level,fmt,args...) \
+ printk(level "%s %s: " fmt , driver_name , \
+ pci_name(dev->pdev) , ## args)
+
+#ifdef DEBUG
+#undef DEBUG
+#define DEBUG(dev,fmt,args...) \
+ xprintk(dev , KERN_DEBUG , fmt , ## args)
+#else
+#define DEBUG(dev,fmt,args...) \
+ do { } while (0)
+#endif /* DEBUG */
+
+#ifdef VERBOSE
+#define VDEBUG DEBUG
+#else
+#define VDEBUG(dev,fmt,args...) \
+ do { } while (0)
+#endif /* VERBOSE */
+
+#define ERROR(dev,fmt,args...) \
+ xprintk(dev , KERN_ERR , fmt , ## args)
+#define WARN(dev,fmt,args...) \
+ xprintk(dev , KERN_WARNING , fmt , ## args)
+#define INFO(dev,fmt,args...) \
+ xprintk(dev , KERN_INFO , fmt , ## args)
+
+/*-------------------------------------------------------------------------*/
+
+static inline void start_out_naking (struct net2280_ep *ep)
+{
+ /* NOTE: hardware races lurk here, and PING protocol issues */
+ writel ((1 << SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp);
+ /* synch with device */
+ readl (&ep->regs->ep_rsp);
+}
+
+#ifdef DEBUG
+static inline void assert_out_naking (struct net2280_ep *ep, const char *where)
+{
+ u32 tmp = readl (&ep->regs->ep_stat);
+
+ if ((tmp & (1 << NAK_OUT_PACKETS)) == 0) {
+ DEBUG (ep->dev, "%s %s %08x !NAK\n",
+ ep->ep.name, where, tmp);
+ writel ((1 << SET_NAK_OUT_PACKETS),
+ &ep->regs->ep_rsp);
+ }
+}
+#define ASSERT_OUT_NAKING(ep) assert_out_naking(ep,__FUNCTION__)
+#else
+#define ASSERT_OUT_NAKING(ep) do {} while (0)
+#endif
+
+static inline void stop_out_naking (struct net2280_ep *ep)
+{
+ u32 tmp;
+
+ tmp = readl (&ep->regs->ep_stat);
+ if ((tmp & (1 << NAK_OUT_PACKETS)) != 0)
+ writel ((1 << CLEAR_NAK_OUT_PACKETS), &ep->regs->ep_rsp);
+}
+
+#endif /* __KERNEL__ */
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
new file mode 100644
index 00000000000..b66ea5a6ed7
--- /dev/null
+++ b/drivers/usb/gadget/omap_udc.c
@@ -0,0 +1,2872 @@
+/*
+ * omap_udc.c -- for OMAP full speed udc; most chips support OTG.
+ *
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ * Copyright (C) 2004-2005 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#undef DEBUG
+#undef VERBOSE
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/proc_fs.h>
+#include <linux/mm.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/usb_ch9.h>
+#include <linux/usb_gadget.h>
+#include <linux/usb_otg.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/unaligned.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/dma.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/usb.h>
+
+#include "omap_udc.h"
+
+#undef USB_TRACE
+
+/* bulk DMA seems to be behaving for both IN and OUT */
+#define USE_DMA
+
+/* ISO too */
+#define USE_ISO
+
+#define DRIVER_DESC "OMAP UDC driver"
+#define DRIVER_VERSION "4 October 2004"
+
+#define DMA_ADDR_INVALID (~(dma_addr_t)0)
+
+
+/*
+ * The OMAP UDC needs _very_ early endpoint setup: before enabling the
+ * D+ pullup to allow enumeration. That's too early for the gadget
+ * framework to use from usb_endpoint_enable(), which happens after
+ * enumeration as part of activating an interface. (But if we add an
+ * optional new "UDC not yet running" state to the gadget driver model,
+ * even just during driver binding, the endpoint autoconfig logic is the
+ * natural spot to manufacture new endpoints.)
+ *
+ * So instead of using endpoint enable calls to control the hardware setup,
+ * this driver defines a "fifo mode" parameter. It's used during driver
+ * initialization to choose among a set of pre-defined endpoint configs.
+ * See omap_udc_setup() for available modes, or to add others. That code
+ * lives in an init section, so use this driver as a module if you need
+ * to change the fifo mode after the kernel boots.
+ *
+ * Gadget drivers normally ignore endpoints they don't care about, and
+ * won't include them in configuration descriptors. That means only
+ * misbehaving hosts would even notice they exist.
+ */
+#ifdef USE_ISO
+static unsigned fifo_mode = 3;
+#else
+static unsigned fifo_mode = 0;
+#endif
+
+/* "modprobe omap_udc fifo_mode=42", or else as a kernel
+ * boot parameter "omap_udc:fifo_mode=42"
+ */
+module_param (fifo_mode, uint, 0);
+MODULE_PARM_DESC (fifo_mode, "endpoint setup (0 == default)");
+
+#ifdef USE_DMA
+static unsigned use_dma = 1;
+
+/* "modprobe omap_udc use_dma=y", or else as a kernel
+ * boot parameter "omap_udc:use_dma=y"
+ */
+module_param (use_dma, bool, 0);
+MODULE_PARM_DESC (use_dma, "enable/disable DMA");
+#else /* !USE_DMA */
+
+/* save a bit of code */
+#define use_dma 0
+#endif /* !USE_DMA */
+
+
+static const char driver_name [] = "omap_udc";
+static const char driver_desc [] = DRIVER_DESC;
+
+/*-------------------------------------------------------------------------*/
+
+/* there's a notion of "current endpoint" for modifying endpoint
+ * state, and PIO access to its FIFO.
+ */
+
+static void use_ep(struct omap_ep *ep, u16 select)
+{
+ u16 num = ep->bEndpointAddress & 0x0f;
+
+ if (ep->bEndpointAddress & USB_DIR_IN)
+ num |= UDC_EP_DIR;
+ UDC_EP_NUM_REG = num | select;
+ /* when select, MUST deselect later !! */
+}
+
+static inline void deselect_ep(void)
+{
+ UDC_EP_NUM_REG &= ~UDC_EP_SEL;
+ /* 6 wait states before TX will happen */
+}
+
+static void dma_channel_claim(struct omap_ep *ep, unsigned preferred);
+
+/*-------------------------------------------------------------------------*/
+
+static int omap_ep_enable(struct usb_ep *_ep,
+ const struct usb_endpoint_descriptor *desc)
+{
+ struct omap_ep *ep = container_of(_ep, struct omap_ep, ep);
+ struct omap_udc *udc;
+ unsigned long flags;
+ u16 maxp;
+
+ /* catch various bogus parameters */
+ if (!_ep || !desc || ep->desc
+ || desc->bDescriptorType != USB_DT_ENDPOINT
+ || ep->bEndpointAddress != desc->bEndpointAddress
+ || ep->maxpacket < le16_to_cpu
+ (desc->wMaxPacketSize)) {
+ DBG("%s, bad ep or descriptor\n", __FUNCTION__);
+ return -EINVAL;
+ }
+ maxp = le16_to_cpu (desc->wMaxPacketSize);
+ if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
+ && maxp != ep->maxpacket)
+ || desc->wMaxPacketSize > ep->maxpacket
+ || !desc->wMaxPacketSize) {
+ DBG("%s, bad %s maxpacket\n", __FUNCTION__, _ep->name);
+ return -ERANGE;
+ }
+
+#ifdef USE_ISO
+ if ((desc->bmAttributes == USB_ENDPOINT_XFER_ISOC
+ && desc->bInterval != 1)) {
+ /* hardware wants period = 1; USB allows 2^(Interval-1) */
+ DBG("%s, unsupported ISO period %dms\n", _ep->name,
+ 1 << (desc->bInterval - 1));
+ return -EDOM;
+ }
+#else
+ if (desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+ DBG("%s, ISO nyet\n", _ep->name);
+ return -EDOM;
+ }
+#endif
+
+ /* xfer types must match, except that interrupt ~= bulk */
+ if (ep->bmAttributes != desc->bmAttributes
+ && ep->bmAttributes != USB_ENDPOINT_XFER_BULK
+ && desc->bmAttributes != USB_ENDPOINT_XFER_INT) {
+ DBG("%s, %s type mismatch\n", __FUNCTION__, _ep->name);
+ return -EINVAL;
+ }
+
+ udc = ep->udc;
+ if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) {
+ DBG("%s, bogus device state\n", __FUNCTION__);
+ return -ESHUTDOWN;
+ }
+
+ spin_lock_irqsave(&udc->lock, flags);
+
+ ep->desc = desc;
+ ep->irqs = 0;
+ ep->stopped = 0;
+ ep->ep.maxpacket = maxp;
+
+ /* set endpoint to initial state */
+ ep->dma_channel = 0;
+ ep->has_dma = 0;
+ ep->lch = -1;
+ use_ep(ep, UDC_EP_SEL);
+ UDC_CTRL_REG = UDC_RESET_EP;
+ ep->ackwait = 0;
+ deselect_ep();
+
+ if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC)
+ list_add(&ep->iso, &udc->iso);
+
+ /* maybe assign a DMA channel to this endpoint */
+ if (use_dma && desc->bmAttributes == USB_ENDPOINT_XFER_BULK)
+ /* FIXME ISO can dma, but prefers first channel */
+ dma_channel_claim(ep, 0);
+
+ /* PIO OUT may RX packets */
+ if (desc->bmAttributes != USB_ENDPOINT_XFER_ISOC
+ && !ep->has_dma
+ && !(ep->bEndpointAddress & USB_DIR_IN)) {
+ UDC_CTRL_REG = UDC_SET_FIFO_EN;
+ ep->ackwait = 1 + ep->double_buf;
+ }
+
+ spin_unlock_irqrestore(&udc->lock, flags);
+ VDBG("%s enabled\n", _ep->name);
+ return 0;
+}
+
+static void nuke(struct omap_ep *, int status);
+
+static int omap_ep_disable(struct usb_ep *_ep)
+{
+ struct omap_ep *ep = container_of(_ep, struct omap_ep, ep);
+ unsigned long flags;
+
+ if (!_ep || !ep->desc) {
+ DBG("%s, %s not enabled\n", __FUNCTION__,
+ _ep ? ep->ep.name : NULL);
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&ep->udc->lock, flags);
+ ep->desc = 0;
+ nuke (ep, -ESHUTDOWN);
+ ep->ep.maxpacket = ep->maxpacket;
+ ep->has_dma = 0;
+ UDC_CTRL_REG = UDC_SET_HALT;
+ list_del_init(&ep->iso);
+ del_timer(&ep->timer);
+
+ spin_unlock_irqrestore(&ep->udc->lock, flags);
+
+ VDBG("%s disabled\n", _ep->name);
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_request *
+omap_alloc_request(struct usb_ep *ep, int gfp_flags)
+{
+ struct omap_req *req;
+
+ req = kmalloc(sizeof *req, gfp_flags);
+ if (req) {
+ memset (req, 0, sizeof *req);
+ req->req.dma = DMA_ADDR_INVALID;
+ INIT_LIST_HEAD (&req->queue);
+ }
+ return &req->req;
+}
+
+static void
+omap_free_request(struct usb_ep *ep, struct usb_request *_req)
+{
+ struct omap_req *req = container_of(_req, struct omap_req, req);
+
+ if (_req)
+ kfree (req);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void *
+omap_alloc_buffer(
+ struct usb_ep *_ep,
+ unsigned bytes,
+ dma_addr_t *dma,
+ int gfp_flags
+)
+{
+ void *retval;
+ struct omap_ep *ep;
+
+ ep = container_of(_ep, struct omap_ep, ep);
+ if (use_dma && ep->has_dma) {
+ static int warned;
+ if (!warned && bytes < PAGE_SIZE) {
+ dev_warn(ep->udc->gadget.dev.parent,
+ "using dma_alloc_coherent for "
+ "small allocations wastes memory\n");
+ warned++;
+ }
+ return dma_alloc_coherent(ep->udc->gadget.dev.parent,
+ bytes, dma, gfp_flags);
+ }
+
+ retval = kmalloc(bytes, gfp_flags);
+ if (retval)
+ *dma = virt_to_phys(retval);
+ return retval;
+}
+
+static void omap_free_buffer(
+ struct usb_ep *_ep,
+ void *buf,
+ dma_addr_t dma,
+ unsigned bytes
+)
+{
+ struct omap_ep *ep;
+
+ ep = container_of(_ep, struct omap_ep, ep);
+ if (use_dma && _ep && ep->has_dma)
+ dma_free_coherent(ep->udc->gadget.dev.parent, bytes, buf, dma);
+ else
+ kfree (buf);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void
+done(struct omap_ep *ep, struct omap_req *req, int status)
+{
+ unsigned stopped = ep->stopped;
+
+ list_del_init(&req->queue);
+
+ if (req->req.status == -EINPROGRESS)
+ req->req.status = status;
+ else
+ status = req->req.status;
+
+ if (use_dma && ep->has_dma) {
+ if (req->mapped) {
+ dma_unmap_single(ep->udc->gadget.dev.parent,
+ req->req.dma, req->req.length,
+ (ep->bEndpointAddress & USB_DIR_IN)
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+ req->req.dma = DMA_ADDR_INVALID;
+ req->mapped = 0;
+ } else
+ dma_sync_single_for_cpu(ep->udc->gadget.dev.parent,
+ req->req.dma, req->req.length,
+ (ep->bEndpointAddress & USB_DIR_IN)
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+ }
+
+#ifndef USB_TRACE
+ if (status && status != -ESHUTDOWN)
+#endif
+ VDBG("complete %s req %p stat %d len %u/%u\n",
+ ep->ep.name, &req->req, status,
+ req->req.actual, req->req.length);
+
+ /* don't modify queue heads during completion callback */
+ ep->stopped = 1;
+ spin_unlock(&ep->udc->lock);
+ req->req.complete(&ep->ep, &req->req);
+ spin_lock(&ep->udc->lock);
+ ep->stopped = stopped;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#define FIFO_FULL (UDC_NON_ISO_FIFO_FULL | UDC_ISO_FIFO_FULL)
+#define FIFO_UNWRITABLE (UDC_EP_HALTED | FIFO_FULL)
+
+#define FIFO_EMPTY (UDC_NON_ISO_FIFO_EMPTY | UDC_ISO_FIFO_EMPTY)
+#define FIFO_UNREADABLE (UDC_EP_HALTED | FIFO_EMPTY)
+
+static inline int
+write_packet(u8 *buf, struct omap_req *req, unsigned max)
+{
+ unsigned len;
+ u16 *wp;
+
+ len = min(req->req.length - req->req.actual, max);
+ req->req.actual += len;
+
+ max = len;
+ if (likely((((int)buf) & 1) == 0)) {
+ wp = (u16 *)buf;
+ while (max >= 2) {
+ UDC_DATA_REG = *wp++;
+ max -= 2;
+ }
+ buf = (u8 *)wp;
+ }
+ while (max--)
+ *(volatile u8 *)&UDC_DATA_REG = *buf++;
+ return len;
+}
+
+// FIXME change r/w fifo calling convention
+
+
+// return: 0 = still running, 1 = completed, negative = errno
+static int write_fifo(struct omap_ep *ep, struct omap_req *req)
+{
+ u8 *buf;
+ unsigned count;
+ int is_last;
+ u16 ep_stat;
+
+ buf = req->req.buf + req->req.actual;
+ prefetch(buf);
+
+ /* PIO-IN isn't double buffered except for iso */
+ ep_stat = UDC_STAT_FLG_REG;
+ if (ep_stat & FIFO_UNWRITABLE)
+ return 0;
+
+ count = ep->ep.maxpacket;
+ count = write_packet(buf, req, count);
+ UDC_CTRL_REG = UDC_SET_FIFO_EN;
+ ep->ackwait = 1;
+
+ /* last packet is often short (sometimes a zlp) */
+ if (count != ep->ep.maxpacket)
+ is_last = 1;
+ else if (req->req.length == req->req.actual
+ && !req->req.zero)
+ is_last = 1;
+ else
+ is_last = 0;
+
+ /* NOTE: requests complete when all IN data is in a
+ * FIFO (or sometimes later, if a zlp was needed).
+ * Use usb_ep_fifo_status() where needed.
+ */
+ if (is_last)
+ done(ep, req, 0);
+ return is_last;
+}
+
+static inline int
+read_packet(u8 *buf, struct omap_req *req, unsigned avail)
+{
+ unsigned len;
+ u16 *wp;
+
+ len = min(req->req.length - req->req.actual, avail);
+ req->req.actual += len;
+ avail = len;
+
+ if (likely((((int)buf) & 1) == 0)) {
+ wp = (u16 *)buf;
+ while (avail >= 2) {
+ *wp++ = UDC_DATA_REG;
+ avail -= 2;
+ }
+ buf = (u8 *)wp;
+ }
+ while (avail--)
+ *buf++ = *(volatile u8 *)&UDC_DATA_REG;
+ return len;
+}
+
+// return: 0 = still running, 1 = queue empty, negative = errno
+static int read_fifo(struct omap_ep *ep, struct omap_req *req)
+{
+ u8 *buf;
+ unsigned count, avail;
+ int is_last;
+
+ buf = req->req.buf + req->req.actual;
+ prefetchw(buf);
+
+ for (;;) {
+ u16 ep_stat = UDC_STAT_FLG_REG;
+
+ is_last = 0;
+ if (ep_stat & FIFO_EMPTY) {
+ if (!ep->double_buf)
+ break;
+ ep->fnf = 1;
+ }
+ if (ep_stat & UDC_EP_HALTED)
+ break;
+
+ if (ep_stat & FIFO_FULL)
+ avail = ep->ep.maxpacket;
+ else {
+ avail = UDC_RXFSTAT_REG;
+ ep->fnf = ep->double_buf;
+ }
+ count = read_packet(buf, req, avail);
+
+ /* partial packet reads may not be errors */
+ if (count < ep->ep.maxpacket) {
+ is_last = 1;
+ /* overflowed this request? flush extra data */
+ if (count != avail) {
+ req->req.status = -EOVERFLOW;
+ avail -= count;
+ while (avail--)
+ (void) *(volatile u8 *)&UDC_DATA_REG;
+ }
+ } else if (req->req.length == req->req.actual)
+ is_last = 1;
+ else
+ is_last = 0;
+
+ if (!ep->bEndpointAddress)
+ break;
+ if (is_last)
+ done(ep, req, 0);
+ break;
+ }
+ return is_last;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static u16 dma_src_len(struct omap_ep *ep, dma_addr_t start)
+{
+ dma_addr_t end;
+
+ /* IN-DMA needs this on fault/cancel paths, so 15xx misreports
+ * the last transfer's bytecount by more than a FIFO's worth.
+ */
+ if (cpu_is_omap15xx())
+ return 0;
+
+ end = omap_readw(OMAP_DMA_CSAC(ep->lch));
+ if (end == ep->dma_counter)
+ return 0;
+
+ end |= start & (0xffff << 16);
+ if (end < start)
+ end += 0x10000;
+ return end - start;
+}
+
+#define DMA_DEST_LAST(x) (cpu_is_omap15xx() \
+ ? OMAP_DMA_CSAC(x) /* really: CPC */ \
+ : OMAP_DMA_CDAC(x))
+
+static u16 dma_dest_len(struct omap_ep *ep, dma_addr_t start)
+{
+ dma_addr_t end;
+
+ end = omap_readw(DMA_DEST_LAST(ep->lch));
+ if (end == ep->dma_counter)
+ return 0;
+
+ end |= start & (0xffff << 16);
+ if (cpu_is_omap15xx())
+ end++;
+ if (end < start)
+ end += 0x10000;
+ return end - start;
+}
+
+
+/* Each USB transfer request using DMA maps to one or more DMA transfers.
+ * When DMA completion isn't request completion, the UDC continues with
+ * the next DMA transfer for that USB transfer.
+ */
+
+static void next_in_dma(struct omap_ep *ep, struct omap_req *req)
+{
+ u16 txdma_ctrl;
+ unsigned length = req->req.length - req->req.actual;
+ const int sync_mode = cpu_is_omap15xx()
+ ? OMAP_DMA_SYNC_FRAME
+ : OMAP_DMA_SYNC_ELEMENT;
+
+ /* measure length in either bytes or packets */
+ if ((cpu_is_omap16xx() && length <= (UDC_TXN_TSC + 1))
+ || (cpu_is_omap15xx() && length < ep->maxpacket)) {
+ txdma_ctrl = UDC_TXN_EOT | length;
+ omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8,
+ length, 1, sync_mode);
+ } else {
+ length = min(length / ep->maxpacket,
+ (unsigned) UDC_TXN_TSC + 1);
+ txdma_ctrl = length;
+ omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8,
+ ep->ep.maxpacket, length, sync_mode);
+ length *= ep->maxpacket;
+ }
+ omap_set_dma_src_params(ep->lch, OMAP_DMA_PORT_EMIFF,
+ OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual);
+
+ omap_start_dma(ep->lch);
+ ep->dma_counter = omap_readw(OMAP_DMA_CSAC(ep->lch));
+ UDC_DMA_IRQ_EN_REG |= UDC_TX_DONE_IE(ep->dma_channel);
+ UDC_TXDMA_REG(ep->dma_channel) = UDC_TXN_START | txdma_ctrl;
+ req->dma_bytes = length;
+}
+
+static void finish_in_dma(struct omap_ep *ep, struct omap_req *req, int status)
+{
+ if (status == 0) {
+ req->req.actual += req->dma_bytes;
+
+ /* return if this request needs to send data or zlp */
+ if (req->req.actual < req->req.length)
+ return;
+ if (req->req.zero
+ && req->dma_bytes != 0
+ && (req->req.actual % ep->maxpacket) == 0)
+ return;
+ } else
+ req->req.actual += dma_src_len(ep, req->req.dma
+ + req->req.actual);
+
+ /* tx completion */
+ omap_stop_dma(ep->lch);
+ UDC_DMA_IRQ_EN_REG &= ~UDC_TX_DONE_IE(ep->dma_channel);
+ done(ep, req, status);
+}
+
+static void next_out_dma(struct omap_ep *ep, struct omap_req *req)
+{
+ unsigned packets;
+
+ /* NOTE: we filtered out "short reads" before, so we know
+ * the buffer has only whole numbers of packets.
+ */
+
+ /* set up this DMA transfer, enable the fifo, start */
+ packets = (req->req.length - req->req.actual) / ep->ep.maxpacket;
+ packets = min(packets, (unsigned)UDC_RXN_TC + 1);
+ req->dma_bytes = packets * ep->ep.maxpacket;
+ omap_set_dma_transfer_params(ep->lch, OMAP_DMA_DATA_TYPE_S8,
+ ep->ep.maxpacket, packets,
+ OMAP_DMA_SYNC_ELEMENT);
+ omap_set_dma_dest_params(ep->lch, OMAP_DMA_PORT_EMIFF,
+ OMAP_DMA_AMODE_POST_INC, req->req.dma + req->req.actual);
+ ep->dma_counter = omap_readw(DMA_DEST_LAST(ep->lch));
+
+ UDC_RXDMA_REG(ep->dma_channel) = UDC_RXN_STOP | (packets - 1);
+ UDC_DMA_IRQ_EN_REG |= UDC_RX_EOT_IE(ep->dma_channel);
+ UDC_EP_NUM_REG = (ep->bEndpointAddress & 0xf);
+ UDC_CTRL_REG = UDC_SET_FIFO_EN;
+
+ omap_start_dma(ep->lch);
+}
+
+static void
+finish_out_dma(struct omap_ep *ep, struct omap_req *req, int status)
+{
+ u16 count;
+
+ if (status == 0)
+ ep->dma_counter = (u16) (req->req.dma + req->req.actual);
+ count = dma_dest_len(ep, req->req.dma + req->req.actual);
+ count += req->req.actual;
+ if (count <= req->req.length)
+ req->req.actual = count;
+
+ if (count != req->dma_bytes || status)
+ omap_stop_dma(ep->lch);
+
+ /* if this wasn't short, request may need another transfer */
+ else if (req->req.actual < req->req.length)
+ return;
+
+ /* rx completion */
+ UDC_DMA_IRQ_EN_REG &= ~UDC_RX_EOT_IE(ep->dma_channel);
+ done(ep, req, status);
+}
+
+static void dma_irq(struct omap_udc *udc, u16 irq_src)
+{
+ u16 dman_stat = UDC_DMAN_STAT_REG;
+ struct omap_ep *ep;
+ struct omap_req *req;
+
+ /* IN dma: tx to host */
+ if (irq_src & UDC_TXN_DONE) {
+ ep = &udc->ep[16 + UDC_DMA_TX_SRC(dman_stat)];
+ ep->irqs++;
+ /* can see TXN_DONE after dma abort */
+ if (!list_empty(&ep->queue)) {
+ req = container_of(ep->queue.next,
+ struct omap_req, queue);
+ finish_in_dma(ep, req, 0);
+ }
+ UDC_IRQ_SRC_REG = UDC_TXN_DONE;
+
+ if (!list_empty (&ep->queue)) {
+ req = container_of(ep->queue.next,
+ struct omap_req, queue);
+ next_in_dma(ep, req);
+ }
+ }
+
+ /* OUT dma: rx from host */
+ if (irq_src & UDC_RXN_EOT) {
+ ep = &udc->ep[UDC_DMA_RX_SRC(dman_stat)];
+ ep->irqs++;
+ /* can see RXN_EOT after dma abort */
+ if (!list_empty(&ep->queue)) {
+ req = container_of(ep->queue.next,
+ struct omap_req, queue);
+ finish_out_dma(ep, req, 0);
+ }
+ UDC_IRQ_SRC_REG = UDC_RXN_EOT;
+
+ if (!list_empty (&ep->queue)) {
+ req = container_of(ep->queue.next,
+ struct omap_req, queue);
+ next_out_dma(ep, req);
+ }
+ }
+
+ if (irq_src & UDC_RXN_CNT) {
+ ep = &udc->ep[UDC_DMA_RX_SRC(dman_stat)];
+ ep->irqs++;
+ /* omap15xx does this unasked... */
+ VDBG("%s, RX_CNT irq?\n", ep->ep.name);
+ UDC_IRQ_SRC_REG = UDC_RXN_CNT;
+ }
+}
+
+static void dma_error(int lch, u16 ch_status, void *data)
+{
+ struct omap_ep *ep = data;
+
+ /* if ch_status & OMAP_DMA_DROP_IRQ ... */
+ /* if ch_status & OMAP_DMA_TOUT_IRQ ... */
+ ERR("%s dma error, lch %d status %02x\n", ep->ep.name, lch, ch_status);
+
+ /* complete current transfer ... */
+}
+
+static void dma_channel_claim(struct omap_ep *ep, unsigned channel)
+{
+ u16 reg;
+ int status, restart, is_in;
+
+ is_in = ep->bEndpointAddress & USB_DIR_IN;
+ if (is_in)
+ reg = UDC_TXDMA_CFG_REG;
+ else
+ reg = UDC_RXDMA_CFG_REG;
+ reg |= 1 << 12; /* "pulse" activated */
+
+ ep->dma_channel = 0;
+ ep->lch = -1;
+ if (channel == 0 || channel > 3) {
+ if ((reg & 0x0f00) == 0)
+ channel = 3;
+ else if ((reg & 0x00f0) == 0)
+ channel = 2;
+ else if ((reg & 0x000f) == 0) /* preferred for ISO */
+ channel = 1;
+ else {
+ status = -EMLINK;
+ goto just_restart;
+ }
+ }
+ reg |= (0x0f & ep->bEndpointAddress) << (4 * (channel - 1));
+ ep->dma_channel = channel;
+
+ if (is_in) {
+ status = omap_request_dma(OMAP_DMA_USB_W2FC_TX0 - 1 + channel,
+ ep->ep.name, dma_error, ep, &ep->lch);
+ if (status == 0) {
+ UDC_TXDMA_CFG_REG = reg;
+ omap_set_dma_dest_params(ep->lch,
+ OMAP_DMA_PORT_TIPB,
+ OMAP_DMA_AMODE_CONSTANT,
+ (unsigned long) io_v2p((u32)&UDC_DATA_DMA_REG));
+ }
+ } else {
+ status = omap_request_dma(OMAP_DMA_USB_W2FC_RX0 - 1 + channel,
+ ep->ep.name, dma_error, ep, &ep->lch);
+ if (status == 0) {
+ UDC_RXDMA_CFG_REG = reg;
+ omap_set_dma_src_params(ep->lch,
+ OMAP_DMA_PORT_TIPB,
+ OMAP_DMA_AMODE_CONSTANT,
+ (unsigned long) io_v2p((u32)&UDC_DATA_DMA_REG));
+ }
+ }
+ if (status)
+ ep->dma_channel = 0;
+ else {
+ ep->has_dma = 1;
+ omap_disable_dma_irq(ep->lch, OMAP_DMA_BLOCK_IRQ);
+
+ /* channel type P: hw synch (fifo) */
+ if (!cpu_is_omap15xx())
+ omap_writew(2, OMAP_DMA_LCH_CTRL(ep->lch));
+ }
+
+just_restart:
+ /* restart any queue, even if the claim failed */
+ restart = !ep->stopped && !list_empty(&ep->queue);
+
+ if (status)
+ DBG("%s no dma channel: %d%s\n", ep->ep.name, status,
+ restart ? " (restart)" : "");
+ else
+ DBG("%s claimed %cxdma%d lch %d%s\n", ep->ep.name,
+ is_in ? 't' : 'r',
+ ep->dma_channel - 1, ep->lch,
+ restart ? " (restart)" : "");
+
+ if (restart) {
+ struct omap_req *req;
+ req = container_of(ep->queue.next, struct omap_req, queue);
+ if (ep->has_dma)
+ (is_in ? next_in_dma : next_out_dma)(ep, req);
+ else {
+ use_ep(ep, UDC_EP_SEL);
+ (is_in ? write_fifo : read_fifo)(ep, req);
+ deselect_ep();
+ if (!is_in) {
+ UDC_CTRL_REG = UDC_SET_FIFO_EN;
+ ep->ackwait = 1 + ep->double_buf;
+ }
+ /* IN: 6 wait states before it'll tx */
+ }
+ }
+}
+
+static void dma_channel_release(struct omap_ep *ep)
+{
+ int shift = 4 * (ep->dma_channel - 1);
+ u16 mask = 0x0f << shift;
+ struct omap_req *req;
+ int active;
+
+ /* abort any active usb transfer request */
+ if (!list_empty(&ep->queue))
+ req = container_of(ep->queue.next, struct omap_req, queue);
+ else
+ req = 0;
+
+ active = ((1 << 7) & omap_readl(OMAP_DMA_CCR(ep->lch))) != 0;
+
+ DBG("%s release %s %cxdma%d %p\n", ep->ep.name,
+ active ? "active" : "idle",
+ (ep->bEndpointAddress & USB_DIR_IN) ? 't' : 'r',
+ ep->dma_channel - 1, req);
+
+ /* wait till current packet DMA finishes, and fifo empties */
+ if (ep->bEndpointAddress & USB_DIR_IN) {
+ UDC_TXDMA_CFG_REG &= ~mask;
+
+ if (req) {
+ finish_in_dma(ep, req, -ECONNRESET);
+
+ /* clear FIFO; hosts probably won't empty it */
+ use_ep(ep, UDC_EP_SEL);
+ UDC_CTRL_REG = UDC_CLR_EP;
+ deselect_ep();
+ }
+ while (UDC_TXDMA_CFG_REG & mask)
+ udelay(10);
+ } else {
+ UDC_RXDMA_CFG_REG &= ~mask;
+
+ /* dma empties the fifo */
+ while (UDC_RXDMA_CFG_REG & mask)
+ udelay(10);
+ if (req)
+ finish_out_dma(ep, req, -ECONNRESET);
+ }
+ omap_free_dma(ep->lch);
+ ep->dma_channel = 0;
+ ep->lch = -1;
+ /* has_dma still set, till endpoint is fully quiesced */
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int
+omap_ep_queue(struct usb_ep *_ep, struct usb_request *_req, int gfp_flags)
+{
+ struct omap_ep *ep = container_of(_ep, struct omap_ep, ep);
+ struct omap_req *req = container_of(_req, struct omap_req, req);
+ struct omap_udc *udc;
+ unsigned long flags;
+ int is_iso = 0;
+
+ /* catch various bogus parameters */
+ if (!_req || !req->req.complete || !req->req.buf
+ || !list_empty(&req->queue)) {
+ DBG("%s, bad params\n", __FUNCTION__);
+ return -EINVAL;
+ }
+ if (!_ep || (!ep->desc && ep->bEndpointAddress)) {
+ DBG("%s, bad ep\n", __FUNCTION__);
+ return -EINVAL;
+ }
+ if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+ if (req->req.length > ep->ep.maxpacket)
+ return -EMSGSIZE;
+ is_iso = 1;
+ }
+
+ /* this isn't bogus, but OMAP DMA isn't the only hardware to
+ * have a hard time with partial packet reads... reject it.
+ */
+ if (use_dma
+ && ep->has_dma
+ && ep->bEndpointAddress != 0
+ && (ep->bEndpointAddress & USB_DIR_IN) == 0
+ && (req->req.length % ep->ep.maxpacket) != 0) {
+ DBG("%s, no partial packet OUT reads\n", __FUNCTION__);
+ return -EMSGSIZE;
+ }
+
+ udc = ep->udc;
+ if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
+ return -ESHUTDOWN;
+
+ if (use_dma && ep->has_dma) {
+ if (req->req.dma == DMA_ADDR_INVALID) {
+ req->req.dma = dma_map_single(
+ ep->udc->gadget.dev.parent,
+ req->req.buf,
+ req->req.length,
+ (ep->bEndpointAddress & USB_DIR_IN)
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+ req->mapped = 1;
+ } else {
+ dma_sync_single_for_device(
+ ep->udc->gadget.dev.parent,
+ req->req.dma, req->req.length,
+ (ep->bEndpointAddress & USB_DIR_IN)
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+ req->mapped = 0;
+ }
+ }
+
+ VDBG("%s queue req %p, len %d buf %p\n",
+ ep->ep.name, _req, _req->length, _req->buf);
+
+ spin_lock_irqsave(&udc->lock, flags);
+
+ req->req.status = -EINPROGRESS;
+ req->req.actual = 0;
+
+ /* maybe kickstart non-iso i/o queues */
+ if (is_iso)
+ UDC_IRQ_EN_REG |= UDC_SOF_IE;
+ else if (list_empty(&ep->queue) && !ep->stopped && !ep->ackwait) {
+ int is_in;
+
+ if (ep->bEndpointAddress == 0) {
+ if (!udc->ep0_pending || !list_empty (&ep->queue)) {
+ spin_unlock_irqrestore(&udc->lock, flags);
+ return -EL2HLT;
+ }
+
+ /* empty DATA stage? */
+ is_in = udc->ep0_in;
+ if (!req->req.length) {
+
+ /* chip became CONFIGURED or ADDRESSED
+ * earlier; drivers may already have queued
+ * requests to non-control endpoints
+ */
+ if (udc->ep0_set_config) {
+ u16 irq_en = UDC_IRQ_EN_REG;
+
+ irq_en |= UDC_DS_CHG_IE | UDC_EP0_IE;
+ if (!udc->ep0_reset_config)
+ irq_en |= UDC_EPN_RX_IE
+ | UDC_EPN_TX_IE;
+ UDC_IRQ_EN_REG = irq_en;
+ }
+
+ /* STATUS is reverse direction */
+ UDC_EP_NUM_REG = is_in
+ ? UDC_EP_SEL
+ : (UDC_EP_SEL|UDC_EP_DIR);
+ UDC_CTRL_REG = UDC_CLR_EP;
+ UDC_CTRL_REG = UDC_SET_FIFO_EN;
+ UDC_EP_NUM_REG = udc->ep0_in ? 0 : UDC_EP_DIR;
+
+ /* cleanup */
+ udc->ep0_pending = 0;
+ done(ep, req, 0);
+ req = 0;
+
+ /* non-empty DATA stage */
+ } else if (is_in) {
+ UDC_EP_NUM_REG = UDC_EP_SEL|UDC_EP_DIR;
+ } else {
+ if (udc->ep0_setup)
+ goto irq_wait;
+ UDC_EP_NUM_REG = UDC_EP_SEL;
+ }
+ } else {
+ is_in = ep->bEndpointAddress & USB_DIR_IN;
+ if (!ep->has_dma)
+ use_ep(ep, UDC_EP_SEL);
+ /* if ISO: SOF IRQs must be enabled/disabled! */
+ }
+
+ if (ep->has_dma)
+ (is_in ? next_in_dma : next_out_dma)(ep, req);
+ else if (req) {
+ if ((is_in ? write_fifo : read_fifo)(ep, req) == 1)
+ req = 0;
+ deselect_ep();
+ if (!is_in) {
+ UDC_CTRL_REG = UDC_SET_FIFO_EN;
+ ep->ackwait = 1 + ep->double_buf;
+ }
+ /* IN: 6 wait states before it'll tx */
+ }
+ }
+
+irq_wait:
+ /* irq handler advances the queue */
+ if (req != 0)
+ list_add_tail(&req->queue, &ep->queue);
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ return 0;
+}
+
+static int omap_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct omap_ep *ep = container_of(_ep, struct omap_ep, ep);
+ struct omap_req *req;
+ unsigned long flags;
+
+ if (!_ep || !_req)
+ return -EINVAL;
+
+ spin_lock_irqsave(&ep->udc->lock, flags);
+
+ /* make sure it's actually queued on this endpoint */
+ list_for_each_entry (req, &ep->queue, queue) {
+ if (&req->req == _req)
+ break;
+ }
+ if (&req->req != _req) {
+ spin_unlock_irqrestore(&ep->udc->lock, flags);
+ return -EINVAL;
+ }
+
+ if (use_dma && ep->dma_channel && ep->queue.next == &req->queue) {
+ int channel = ep->dma_channel;
+
+ /* releasing the channel cancels the request,
+ * reclaiming the channel restarts the queue
+ */
+ dma_channel_release(ep);
+ dma_channel_claim(ep, channel);
+ } else
+ done(ep, req, -ECONNRESET);
+ spin_unlock_irqrestore(&ep->udc->lock, flags);
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int omap_ep_set_halt(struct usb_ep *_ep, int value)
+{
+ struct omap_ep *ep = container_of(_ep, struct omap_ep, ep);
+ unsigned long flags;
+ int status = -EOPNOTSUPP;
+
+ spin_lock_irqsave(&ep->udc->lock, flags);
+
+ /* just use protocol stalls for ep0; real halts are annoying */
+ if (ep->bEndpointAddress == 0) {
+ if (!ep->udc->ep0_pending)
+ status = -EINVAL;
+ else if (value) {
+ if (ep->udc->ep0_set_config) {
+ WARN("error changing config?\n");
+ UDC_SYSCON2_REG = UDC_CLR_CFG;
+ }
+ UDC_SYSCON2_REG = UDC_STALL_CMD;
+ ep->udc->ep0_pending = 0;
+ status = 0;
+ } else /* NOP */
+ status = 0;
+
+ /* otherwise, all active non-ISO endpoints can halt */
+ } else if (ep->bmAttributes != USB_ENDPOINT_XFER_ISOC && ep->desc) {
+
+ /* IN endpoints must already be idle */
+ if ((ep->bEndpointAddress & USB_DIR_IN)
+ && !list_empty(&ep->queue)) {
+ status = -EAGAIN;
+ goto done;
+ }
+
+ if (value) {
+ int channel;
+
+ if (use_dma && ep->dma_channel
+ && !list_empty(&ep->queue)) {
+ channel = ep->dma_channel;
+ dma_channel_release(ep);
+ } else
+ channel = 0;
+
+ use_ep(ep, UDC_EP_SEL);
+ if (UDC_STAT_FLG_REG & UDC_NON_ISO_FIFO_EMPTY) {
+ UDC_CTRL_REG = UDC_SET_HALT;
+ status = 0;
+ } else
+ status = -EAGAIN;
+ deselect_ep();
+
+ if (channel)
+ dma_channel_claim(ep, channel);
+ } else {
+ use_ep(ep, 0);
+ UDC_CTRL_REG = UDC_RESET_EP;
+ ep->ackwait = 0;
+ if (!(ep->bEndpointAddress & USB_DIR_IN)) {
+ UDC_CTRL_REG = UDC_SET_FIFO_EN;
+ ep->ackwait = 1 + ep->double_buf;
+ }
+ }
+ }
+done:
+ VDBG("%s %s halt stat %d\n", ep->ep.name,
+ value ? "set" : "clear", status);
+
+ spin_unlock_irqrestore(&ep->udc->lock, flags);
+ return status;
+}
+
+static struct usb_ep_ops omap_ep_ops = {
+ .enable = omap_ep_enable,
+ .disable = omap_ep_disable,
+
+ .alloc_request = omap_alloc_request,
+ .free_request = omap_free_request,
+
+ .alloc_buffer = omap_alloc_buffer,
+ .free_buffer = omap_free_buffer,
+
+ .queue = omap_ep_queue,
+ .dequeue = omap_ep_dequeue,
+
+ .set_halt = omap_ep_set_halt,
+ // fifo_status ... report bytes in fifo
+ // fifo_flush ... flush fifo
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int omap_get_frame(struct usb_gadget *gadget)
+{
+ u16 sof = UDC_SOF_REG;
+ return (sof & UDC_TS_OK) ? (sof & UDC_TS) : -EL2NSYNC;
+}
+
+static int omap_wakeup(struct usb_gadget *gadget)
+{
+ struct omap_udc *udc;
+ unsigned long flags;
+ int retval = -EHOSTUNREACH;
+
+ udc = container_of(gadget, struct omap_udc, gadget);
+
+ spin_lock_irqsave(&udc->lock, flags);
+ if (udc->devstat & UDC_SUS) {
+ /* NOTE: OTG spec erratum says that OTG devices may
+ * issue wakeups without host enable.
+ */
+ if (udc->devstat & (UDC_B_HNP_ENABLE|UDC_R_WK_OK)) {
+ DBG("remote wakeup...\n");
+ UDC_SYSCON2_REG = UDC_RMT_WKP;
+ retval = 0;
+ }
+
+ /* NOTE: non-OTG systems may use SRP TOO... */
+ } else if (!(udc->devstat & UDC_ATT)) {
+ if (udc->transceiver)
+ retval = otg_start_srp(udc->transceiver);
+ }
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ return retval;
+}
+
+static int
+omap_set_selfpowered(struct usb_gadget *gadget, int is_selfpowered)
+{
+ struct omap_udc *udc;
+ unsigned long flags;
+ u16 syscon1;
+
+ udc = container_of(gadget, struct omap_udc, gadget);
+ spin_lock_irqsave(&udc->lock, flags);
+ syscon1 = UDC_SYSCON1_REG;
+ if (is_selfpowered)
+ syscon1 |= UDC_SELF_PWR;
+ else
+ syscon1 &= ~UDC_SELF_PWR;
+ UDC_SYSCON1_REG = syscon1;
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ return 0;
+}
+
+static int can_pullup(struct omap_udc *udc)
+{
+ return udc->driver && udc->softconnect && udc->vbus_active;
+}
+
+static void pullup_enable(struct omap_udc *udc)
+{
+ UDC_SYSCON1_REG |= UDC_PULLUP_EN;
+#ifndef CONFIG_USB_OTG
+ if (!cpu_is_omap15xx())
+ OTG_CTRL_REG |= OTG_BSESSVLD;
+#endif
+ UDC_IRQ_EN_REG = UDC_DS_CHG_IE;
+}
+
+static void pullup_disable(struct omap_udc *udc)
+{
+#ifndef CONFIG_USB_OTG
+ if (!cpu_is_omap15xx())
+ OTG_CTRL_REG &= ~OTG_BSESSVLD;
+#endif
+ UDC_IRQ_EN_REG = UDC_DS_CHG_IE;
+ UDC_SYSCON1_REG &= ~UDC_PULLUP_EN;
+}
+
+/*
+ * Called by whatever detects VBUS sessions: external transceiver
+ * driver, or maybe GPIO0 VBUS IRQ. May request 48 MHz clock.
+ */
+static int omap_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+ struct omap_udc *udc;
+ unsigned long flags;
+
+ udc = container_of(gadget, struct omap_udc, gadget);
+ spin_lock_irqsave(&udc->lock, flags);
+ VDBG("VBUS %s\n", is_active ? "on" : "off");
+ udc->vbus_active = (is_active != 0);
+ if (cpu_is_omap15xx()) {
+ /* "software" detect, ignored if !VBUS_MODE_1510 */
+ if (is_active)
+ FUNC_MUX_CTRL_0_REG |= VBUS_CTRL_1510;
+ else
+ FUNC_MUX_CTRL_0_REG &= ~VBUS_CTRL_1510;
+ }
+ if (can_pullup(udc))
+ pullup_enable(udc);
+ else
+ pullup_disable(udc);
+ spin_unlock_irqrestore(&udc->lock, flags);
+ return 0;
+}
+
+static int omap_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+ struct omap_udc *udc;
+
+ udc = container_of(gadget, struct omap_udc, gadget);
+ if (udc->transceiver)
+ return otg_set_power(udc->transceiver, mA);
+ return -EOPNOTSUPP;
+}
+
+static int omap_pullup(struct usb_gadget *gadget, int is_on)
+{
+ struct omap_udc *udc;
+ unsigned long flags;
+
+ udc = container_of(gadget, struct omap_udc, gadget);
+ spin_lock_irqsave(&udc->lock, flags);
+ udc->softconnect = (is_on != 0);
+ if (can_pullup(udc))
+ pullup_enable(udc);
+ else
+ pullup_disable(udc);
+ spin_unlock_irqrestore(&udc->lock, flags);
+ return 0;
+}
+
+static struct usb_gadget_ops omap_gadget_ops = {
+ .get_frame = omap_get_frame,
+ .wakeup = omap_wakeup,
+ .set_selfpowered = omap_set_selfpowered,
+ .vbus_session = omap_vbus_session,
+ .vbus_draw = omap_vbus_draw,
+ .pullup = omap_pullup,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* dequeue ALL requests; caller holds udc->lock */
+static void nuke(struct omap_ep *ep, int status)
+{
+ struct omap_req *req;
+
+ ep->stopped = 1;
+
+ if (use_dma && ep->dma_channel)
+ dma_channel_release(ep);
+
+ use_ep(ep, 0);
+ UDC_CTRL_REG = UDC_CLR_EP;
+ if (ep->bEndpointAddress && ep->bmAttributes != USB_ENDPOINT_XFER_ISOC)
+ UDC_CTRL_REG = UDC_SET_HALT;
+
+ while (!list_empty(&ep->queue)) {
+ req = list_entry(ep->queue.next, struct omap_req, queue);
+ done(ep, req, status);
+ }
+}
+
+/* caller holds udc->lock */
+static void udc_quiesce(struct omap_udc *udc)
+{
+ struct omap_ep *ep;
+
+ udc->gadget.speed = USB_SPEED_UNKNOWN;
+ nuke(&udc->ep[0], -ESHUTDOWN);
+ list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list)
+ nuke(ep, -ESHUTDOWN);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void update_otg(struct omap_udc *udc)
+{
+ u16 devstat;
+
+ if (!udc->gadget.is_otg)
+ return;
+
+ if (OTG_CTRL_REG & OTG_ID)
+ devstat = UDC_DEVSTAT_REG;
+ else
+ devstat = 0;
+
+ udc->gadget.b_hnp_enable = !!(devstat & UDC_B_HNP_ENABLE);
+ udc->gadget.a_hnp_support = !!(devstat & UDC_A_HNP_SUPPORT);
+ udc->gadget.a_alt_hnp_support = !!(devstat & UDC_A_ALT_HNP_SUPPORT);
+
+ /* Enable HNP early, avoiding races on suspend irq path.
+ * ASSUMES OTG state machine B_BUS_REQ input is true.
+ */
+ if (udc->gadget.b_hnp_enable)
+ OTG_CTRL_REG = (OTG_CTRL_REG | OTG_B_HNPEN | OTG_B_BUSREQ)
+ & ~OTG_PULLUP;
+}
+
+static void ep0_irq(struct omap_udc *udc, u16 irq_src)
+{
+ struct omap_ep *ep0 = &udc->ep[0];
+ struct omap_req *req = 0;
+
+ ep0->irqs++;
+
+ /* Clear any pending requests and then scrub any rx/tx state
+ * before starting to handle the SETUP request.
+ */
+ if (irq_src & UDC_SETUP) {
+ u16 ack = irq_src & (UDC_EP0_TX|UDC_EP0_RX);
+
+ nuke(ep0, 0);
+ if (ack) {
+ UDC_IRQ_SRC_REG = ack;
+ irq_src = UDC_SETUP;
+ }
+ }
+
+ /* IN/OUT packets mean we're in the DATA or STATUS stage.
+ * This driver uses only uses protocol stalls (ep0 never halts),
+ * and if we got this far the gadget driver already had a
+ * chance to stall. Tries to be forgiving of host oddities.
+ *
+ * NOTE: the last chance gadget drivers have to stall control
+ * requests is during their request completion callback.
+ */
+ if (!list_empty(&ep0->queue))
+ req = container_of(ep0->queue.next, struct omap_req, queue);
+
+ /* IN == TX to host */
+ if (irq_src & UDC_EP0_TX) {
+ int stat;
+
+ UDC_IRQ_SRC_REG = UDC_EP0_TX;
+ UDC_EP_NUM_REG = UDC_EP_SEL|UDC_EP_DIR;
+ stat = UDC_STAT_FLG_REG;
+ if (stat & UDC_ACK) {
+ if (udc->ep0_in) {
+ /* write next IN packet from response,
+ * or set up the status stage.
+ */
+ if (req)
+ stat = write_fifo(ep0, req);
+ UDC_EP_NUM_REG = UDC_EP_DIR;
+ if (!req && udc->ep0_pending) {
+ UDC_EP_NUM_REG = UDC_EP_SEL;
+ UDC_CTRL_REG = UDC_CLR_EP;
+ UDC_CTRL_REG = UDC_SET_FIFO_EN;
+ UDC_EP_NUM_REG = 0;
+ udc->ep0_pending = 0;
+ } /* else: 6 wait states before it'll tx */
+ } else {
+ /* ack status stage of OUT transfer */
+ UDC_EP_NUM_REG = UDC_EP_DIR;
+ if (req)
+ done(ep0, req, 0);
+ }
+ req = 0;
+ } else if (stat & UDC_STALL) {
+ UDC_CTRL_REG = UDC_CLR_HALT;
+ UDC_EP_NUM_REG = UDC_EP_DIR;
+ } else {
+ UDC_EP_NUM_REG = UDC_EP_DIR;
+ }
+ }
+
+ /* OUT == RX from host */
+ if (irq_src & UDC_EP0_RX) {
+ int stat;
+
+ UDC_IRQ_SRC_REG = UDC_EP0_RX;
+ UDC_EP_NUM_REG = UDC_EP_SEL;
+ stat = UDC_STAT_FLG_REG;
+ if (stat & UDC_ACK) {
+ if (!udc->ep0_in) {
+ stat = 0;
+ /* read next OUT packet of request, maybe
+ * reactiviting the fifo; stall on errors.
+ */
+ if (!req || (stat = read_fifo(ep0, req)) < 0) {
+ UDC_SYSCON2_REG = UDC_STALL_CMD;
+ udc->ep0_pending = 0;
+ stat = 0;
+ } else if (stat == 0)
+ UDC_CTRL_REG = UDC_SET_FIFO_EN;
+ UDC_EP_NUM_REG = 0;
+
+ /* activate status stage */
+ if (stat == 1) {
+ done(ep0, req, 0);
+ /* that may have STALLed ep0... */
+ UDC_EP_NUM_REG = UDC_EP_SEL|UDC_EP_DIR;
+ UDC_CTRL_REG = UDC_CLR_EP;
+ UDC_CTRL_REG = UDC_SET_FIFO_EN;
+ UDC_EP_NUM_REG = UDC_EP_DIR;
+ udc->ep0_pending = 0;
+ }
+ } else {
+ /* ack status stage of IN transfer */
+ UDC_EP_NUM_REG = 0;
+ if (req)
+ done(ep0, req, 0);
+ }
+ } else if (stat & UDC_STALL) {
+ UDC_CTRL_REG = UDC_CLR_HALT;
+ UDC_EP_NUM_REG = 0;
+ } else {
+ UDC_EP_NUM_REG = 0;
+ }
+ }
+
+ /* SETUP starts all control transfers */
+ if (irq_src & UDC_SETUP) {
+ union u {
+ u16 word[4];
+ struct usb_ctrlrequest r;
+ } u;
+ int status = -EINVAL;
+ struct omap_ep *ep;
+
+ /* read the (latest) SETUP message */
+ do {
+ UDC_EP_NUM_REG = UDC_SETUP_SEL;
+ /* two bytes at a time */
+ u.word[0] = UDC_DATA_REG;
+ u.word[1] = UDC_DATA_REG;
+ u.word[2] = UDC_DATA_REG;
+ u.word[3] = UDC_DATA_REG;
+ UDC_EP_NUM_REG = 0;
+ } while (UDC_IRQ_SRC_REG & UDC_SETUP);
+ le16_to_cpus (&u.r.wValue);
+ le16_to_cpus (&u.r.wIndex);
+ le16_to_cpus (&u.r.wLength);
+
+ /* Delegate almost all control requests to the gadget driver,
+ * except for a handful of ch9 status/feature requests that
+ * hardware doesn't autodecode _and_ the gadget API hides.
+ */
+ udc->ep0_in = (u.r.bRequestType & USB_DIR_IN) != 0;
+ udc->ep0_set_config = 0;
+ udc->ep0_pending = 1;
+ ep0->stopped = 0;
+ ep0->ackwait = 0;
+ switch (u.r.bRequest) {
+ case USB_REQ_SET_CONFIGURATION:
+ /* udc needs to know when ep != 0 is valid */
+ if (u.r.bRequestType != USB_RECIP_DEVICE)
+ goto delegate;
+ if (u.r.wLength != 0)
+ goto do_stall;
+ udc->ep0_set_config = 1;
+ udc->ep0_reset_config = (u.r.wValue == 0);
+ VDBG("set config %d\n", u.r.wValue);
+
+ /* update udc NOW since gadget driver may start
+ * queueing requests immediately; clear config
+ * later if it fails the request.
+ */
+ if (udc->ep0_reset_config)
+ UDC_SYSCON2_REG = UDC_CLR_CFG;
+ else
+ UDC_SYSCON2_REG = UDC_DEV_CFG;
+ update_otg(udc);
+ goto delegate;
+ case USB_REQ_CLEAR_FEATURE:
+ /* clear endpoint halt */
+ if (u.r.bRequestType != USB_RECIP_ENDPOINT)
+ goto delegate;
+ if (u.r.wValue != USB_ENDPOINT_HALT
+ || u.r.wLength != 0)
+ goto do_stall;
+ ep = &udc->ep[u.r.wIndex & 0xf];
+ if (ep != ep0) {
+ if (u.r.wIndex & USB_DIR_IN)
+ ep += 16;
+ if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
+ || !ep->desc)
+ goto do_stall;
+ use_ep(ep, 0);
+ UDC_CTRL_REG = UDC_RESET_EP;
+ ep->ackwait = 0;
+ if (!(ep->bEndpointAddress & USB_DIR_IN)) {
+ UDC_CTRL_REG = UDC_SET_FIFO_EN;
+ ep->ackwait = 1 + ep->double_buf;
+ }
+ }
+ VDBG("%s halt cleared by host\n", ep->name);
+ goto ep0out_status_stage;
+ case USB_REQ_SET_FEATURE:
+ /* set endpoint halt */
+ if (u.r.bRequestType != USB_RECIP_ENDPOINT)
+ goto delegate;
+ if (u.r.wValue != USB_ENDPOINT_HALT
+ || u.r.wLength != 0)
+ goto do_stall;
+ ep = &udc->ep[u.r.wIndex & 0xf];
+ if (u.r.wIndex & USB_DIR_IN)
+ ep += 16;
+ if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
+ || ep == ep0 || !ep->desc)
+ goto do_stall;
+ if (use_dma && ep->has_dma) {
+ /* this has rude side-effects (aborts) and
+ * can't really work if DMA-IN is active
+ */
+ DBG("%s host set_halt, NYET \n", ep->name);
+ goto do_stall;
+ }
+ use_ep(ep, 0);
+ /* can't halt if fifo isn't empty... */
+ UDC_CTRL_REG = UDC_CLR_EP;
+ UDC_CTRL_REG = UDC_SET_HALT;
+ VDBG("%s halted by host\n", ep->name);
+ep0out_status_stage:
+ status = 0;
+ UDC_EP_NUM_REG = UDC_EP_SEL|UDC_EP_DIR;
+ UDC_CTRL_REG = UDC_CLR_EP;
+ UDC_CTRL_REG = UDC_SET_FIFO_EN;
+ UDC_EP_NUM_REG = UDC_EP_DIR;
+ udc->ep0_pending = 0;
+ break;
+ case USB_REQ_GET_STATUS:
+ /* return interface status. if we were pedantic,
+ * we'd detect non-existent interfaces, and stall.
+ */
+ if (u.r.bRequestType
+ != (USB_DIR_IN|USB_RECIP_INTERFACE))
+ goto delegate;
+ /* return two zero bytes */
+ UDC_EP_NUM_REG = UDC_EP_SEL|UDC_EP_DIR;
+ UDC_DATA_REG = 0;
+ UDC_CTRL_REG = UDC_SET_FIFO_EN;
+ UDC_EP_NUM_REG = UDC_EP_DIR;
+ status = 0;
+ VDBG("GET_STATUS, interface %d\n", u.r.wIndex);
+ /* next, status stage */
+ break;
+ default:
+delegate:
+ /* activate the ep0out fifo right away */
+ if (!udc->ep0_in && u.r.wLength) {
+ UDC_EP_NUM_REG = 0;
+ UDC_CTRL_REG = UDC_SET_FIFO_EN;
+ }
+
+ /* gadget drivers see class/vendor specific requests,
+ * {SET,GET}_{INTERFACE,DESCRIPTOR,CONFIGURATION},
+ * and more
+ */
+ VDBG("SETUP %02x.%02x v%04x i%04x l%04x\n",
+ u.r.bRequestType, u.r.bRequest,
+ u.r.wValue, u.r.wIndex, u.r.wLength);
+
+ /* The gadget driver may return an error here,
+ * causing an immediate protocol stall.
+ *
+ * Else it must issue a response, either queueing a
+ * response buffer for the DATA stage, or halting ep0
+ * (causing a protocol stall, not a real halt). A
+ * zero length buffer means no DATA stage.
+ *
+ * It's fine to issue that response after the setup()
+ * call returns, and this IRQ was handled.
+ */
+ udc->ep0_setup = 1;
+ spin_unlock(&udc->lock);
+ status = udc->driver->setup (&udc->gadget, &u.r);
+ spin_lock(&udc->lock);
+ udc->ep0_setup = 0;
+ }
+
+ if (status < 0) {
+do_stall:
+ VDBG("req %02x.%02x protocol STALL; stat %d\n",
+ u.r.bRequestType, u.r.bRequest, status);
+ if (udc->ep0_set_config) {
+ if (udc->ep0_reset_config)
+ WARN("error resetting config?\n");
+ else
+ UDC_SYSCON2_REG = UDC_CLR_CFG;
+ }
+ UDC_SYSCON2_REG = UDC_STALL_CMD;
+ udc->ep0_pending = 0;
+ }
+ }
+}
+
+/*-------------------------------------------------------------------------*/
+
+#define OTG_FLAGS (UDC_B_HNP_ENABLE|UDC_A_HNP_SUPPORT|UDC_A_ALT_HNP_SUPPORT)
+
+static void devstate_irq(struct omap_udc *udc, u16 irq_src)
+{
+ u16 devstat, change;
+
+ devstat = UDC_DEVSTAT_REG;
+ change = devstat ^ udc->devstat;
+ udc->devstat = devstat;
+
+ if (change & (UDC_USB_RESET|UDC_ATT)) {
+ udc_quiesce(udc);
+
+ if (change & UDC_ATT) {
+ /* driver for any external transceiver will
+ * have called omap_vbus_session() already
+ */
+ if (devstat & UDC_ATT) {
+ udc->gadget.speed = USB_SPEED_FULL;
+ VDBG("connect\n");
+ if (!udc->transceiver)
+ pullup_enable(udc);
+ // if (driver->connect) call it
+ } else if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
+ udc->gadget.speed = USB_SPEED_UNKNOWN;
+ if (!udc->transceiver)
+ pullup_disable(udc);
+ DBG("disconnect, gadget %s\n",
+ udc->driver->driver.name);
+ if (udc->driver->disconnect) {
+ spin_unlock(&udc->lock);
+ udc->driver->disconnect(&udc->gadget);
+ spin_lock(&udc->lock);
+ }
+ }
+ change &= ~UDC_ATT;
+ }
+
+ if (change & UDC_USB_RESET) {
+ if (devstat & UDC_USB_RESET) {
+ VDBG("RESET=1\n");
+ } else {
+ udc->gadget.speed = USB_SPEED_FULL;
+ INFO("USB reset done, gadget %s\n",
+ udc->driver->driver.name);
+ /* ep0 traffic is legal from now on */
+ UDC_IRQ_EN_REG = UDC_DS_CHG_IE | UDC_EP0_IE;
+ }
+ change &= ~UDC_USB_RESET;
+ }
+ }
+ if (change & UDC_SUS) {
+ if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
+ // FIXME tell isp1301 to suspend/resume (?)
+ if (devstat & UDC_SUS) {
+ VDBG("suspend\n");
+ update_otg(udc);
+ /* HNP could be under way already */
+ if (udc->gadget.speed == USB_SPEED_FULL
+ && udc->driver->suspend) {
+ spin_unlock(&udc->lock);
+ udc->driver->suspend(&udc->gadget);
+ spin_lock(&udc->lock);
+ }
+ } else {
+ VDBG("resume\n");
+ if (udc->gadget.speed == USB_SPEED_FULL
+ && udc->driver->resume) {
+ spin_unlock(&udc->lock);
+ udc->driver->resume(&udc->gadget);
+ spin_lock(&udc->lock);
+ }
+ }
+ }
+ change &= ~UDC_SUS;
+ }
+ if (!cpu_is_omap15xx() && (change & OTG_FLAGS)) {
+ update_otg(udc);
+ change &= ~OTG_FLAGS;
+ }
+
+ change &= ~(UDC_CFG|UDC_DEF|UDC_ADD);
+ if (change)
+ VDBG("devstat %03x, ignore change %03x\n",
+ devstat, change);
+
+ UDC_IRQ_SRC_REG = UDC_DS_CHG;
+}
+
+static irqreturn_t
+omap_udc_irq(int irq, void *_udc, struct pt_regs *r)
+{
+ struct omap_udc *udc = _udc;
+ u16 irq_src;
+ irqreturn_t status = IRQ_NONE;
+ unsigned long flags;
+
+ spin_lock_irqsave(&udc->lock, flags);
+ irq_src = UDC_IRQ_SRC_REG;
+
+ /* Device state change (usb ch9 stuff) */
+ if (irq_src & UDC_DS_CHG) {
+ devstate_irq(_udc, irq_src);
+ status = IRQ_HANDLED;
+ irq_src &= ~UDC_DS_CHG;
+ }
+
+ /* EP0 control transfers */
+ if (irq_src & (UDC_EP0_RX|UDC_SETUP|UDC_EP0_TX)) {
+ ep0_irq(_udc, irq_src);
+ status = IRQ_HANDLED;
+ irq_src &= ~(UDC_EP0_RX|UDC_SETUP|UDC_EP0_TX);
+ }
+
+ /* DMA transfer completion */
+ if (use_dma && (irq_src & (UDC_TXN_DONE|UDC_RXN_CNT|UDC_RXN_EOT))) {
+ dma_irq(_udc, irq_src);
+ status = IRQ_HANDLED;
+ irq_src &= ~(UDC_TXN_DONE|UDC_RXN_CNT|UDC_RXN_EOT);
+ }
+
+ irq_src &= ~(UDC_SOF|UDC_EPN_TX|UDC_EPN_RX);
+ if (irq_src)
+ DBG("udc_irq, unhandled %03x\n", irq_src);
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ return status;
+}
+
+/* workaround for seemingly-lost IRQs for RX ACKs... */
+#define PIO_OUT_TIMEOUT (jiffies + HZ/3)
+#define HALF_FULL(f) (!((f)&(UDC_NON_ISO_FIFO_FULL|UDC_NON_ISO_FIFO_EMPTY)))
+
+static void pio_out_timer(unsigned long _ep)
+{
+ struct omap_ep *ep = (void *) _ep;
+ unsigned long flags;
+ u16 stat_flg;
+
+ spin_lock_irqsave(&ep->udc->lock, flags);
+ if (!list_empty(&ep->queue) && ep->ackwait) {
+ use_ep(ep, 0);
+ stat_flg = UDC_STAT_FLG_REG;
+
+ if ((stat_flg & UDC_ACK) && (!(stat_flg & UDC_FIFO_EN)
+ || (ep->double_buf && HALF_FULL(stat_flg)))) {
+ struct omap_req *req;
+
+ VDBG("%s: lose, %04x\n", ep->ep.name, stat_flg);
+ req = container_of(ep->queue.next,
+ struct omap_req, queue);
+ UDC_EP_NUM_REG = ep->bEndpointAddress | UDC_EP_SEL;
+ (void) read_fifo(ep, req);
+ UDC_EP_NUM_REG = ep->bEndpointAddress;
+ UDC_CTRL_REG = UDC_SET_FIFO_EN;
+ ep->ackwait = 1 + ep->double_buf;
+ }
+ }
+ mod_timer(&ep->timer, PIO_OUT_TIMEOUT);
+ spin_unlock_irqrestore(&ep->udc->lock, flags);
+}
+
+static irqreturn_t
+omap_udc_pio_irq(int irq, void *_dev, struct pt_regs *r)
+{
+ u16 epn_stat, irq_src;
+ irqreturn_t status = IRQ_NONE;
+ struct omap_ep *ep;
+ int epnum;
+ struct omap_udc *udc = _dev;
+ struct omap_req *req;
+ unsigned long flags;
+
+ spin_lock_irqsave(&udc->lock, flags);
+ epn_stat = UDC_EPN_STAT_REG;
+ irq_src = UDC_IRQ_SRC_REG;
+
+ /* handle OUT first, to avoid some wasteful NAKs */
+ if (irq_src & UDC_EPN_RX) {
+ epnum = (epn_stat >> 8) & 0x0f;
+ UDC_IRQ_SRC_REG = UDC_EPN_RX;
+ status = IRQ_HANDLED;
+ ep = &udc->ep[epnum];
+ ep->irqs++;
+
+ UDC_EP_NUM_REG = epnum | UDC_EP_SEL;
+ ep->fnf = 0;
+ if ((UDC_STAT_FLG_REG & UDC_ACK)) {
+ ep->ackwait--;
+ if (!list_empty(&ep->queue)) {
+ int stat;
+ req = container_of(ep->queue.next,
+ struct omap_req, queue);
+ stat = read_fifo(ep, req);
+ if (!ep->double_buf)
+ ep->fnf = 1;
+ }
+ }
+ /* min 6 clock delay before clearing EP_SEL ... */
+ epn_stat = UDC_EPN_STAT_REG;
+ epn_stat = UDC_EPN_STAT_REG;
+ UDC_EP_NUM_REG = epnum;
+
+ /* enabling fifo _after_ clearing ACK, contrary to docs,
+ * reduces lossage; timer still needed though (sigh).
+ */
+ if (ep->fnf) {
+ UDC_CTRL_REG = UDC_SET_FIFO_EN;
+ ep->ackwait = 1 + ep->double_buf;
+ }
+ mod_timer(&ep->timer, PIO_OUT_TIMEOUT);
+ }
+
+ /* then IN transfers */
+ else if (irq_src & UDC_EPN_TX) {
+ epnum = epn_stat & 0x0f;
+ UDC_IRQ_SRC_REG = UDC_EPN_TX;
+ status = IRQ_HANDLED;
+ ep = &udc->ep[16 + epnum];
+ ep->irqs++;
+
+ UDC_EP_NUM_REG = epnum | UDC_EP_DIR | UDC_EP_SEL;
+ if ((UDC_STAT_FLG_REG & UDC_ACK)) {
+ ep->ackwait = 0;
+ if (!list_empty(&ep->queue)) {
+ req = container_of(ep->queue.next,
+ struct omap_req, queue);
+ (void) write_fifo(ep, req);
+ }
+ }
+ /* min 6 clock delay before clearing EP_SEL ... */
+ epn_stat = UDC_EPN_STAT_REG;
+ epn_stat = UDC_EPN_STAT_REG;
+ UDC_EP_NUM_REG = epnum | UDC_EP_DIR;
+ /* then 6 clocks before it'd tx */
+ }
+
+ spin_unlock_irqrestore(&udc->lock, flags);
+ return status;
+}
+
+#ifdef USE_ISO
+static irqreturn_t
+omap_udc_iso_irq(int irq, void *_dev, struct pt_regs *r)
+{
+ struct omap_udc *udc = _dev;
+ struct omap_ep *ep;
+ int pending = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&udc->lock, flags);
+
+ /* handle all non-DMA ISO transfers */
+ list_for_each_entry (ep, &udc->iso, iso) {
+ u16 stat;
+ struct omap_req *req;
+
+ if (ep->has_dma || list_empty(&ep->queue))
+ continue;
+ req = list_entry(ep->queue.next, struct omap_req, queue);
+
+ use_ep(ep, UDC_EP_SEL);
+ stat = UDC_STAT_FLG_REG;
+
+ /* NOTE: like the other controller drivers, this isn't
+ * currently reporting lost or damaged frames.
+ */
+ if (ep->bEndpointAddress & USB_DIR_IN) {
+ if (stat & UDC_MISS_IN)
+ /* done(ep, req, -EPROTO) */;
+ else
+ write_fifo(ep, req);
+ } else {
+ int status = 0;
+
+ if (stat & UDC_NO_RXPACKET)
+ status = -EREMOTEIO;
+ else if (stat & UDC_ISO_ERR)
+ status = -EILSEQ;
+ else if (stat & UDC_DATA_FLUSH)
+ status = -ENOSR;
+
+ if (status)
+ /* done(ep, req, status) */;
+ else
+ read_fifo(ep, req);
+ }
+ deselect_ep();
+ /* 6 wait states before next EP */
+
+ ep->irqs++;
+ if (!list_empty(&ep->queue))
+ pending = 1;
+ }
+ if (!pending)
+ UDC_IRQ_EN_REG &= ~UDC_SOF_IE;
+ UDC_IRQ_SRC_REG = UDC_SOF;
+
+ spin_unlock_irqrestore(&udc->lock, flags);
+ return IRQ_HANDLED;
+}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+static struct omap_udc *udc;
+
+int usb_gadget_register_driver (struct usb_gadget_driver *driver)
+{
+ int status = -ENODEV;
+ struct omap_ep *ep;
+ unsigned long flags;
+
+ /* basic sanity tests */
+ if (!udc)
+ return -ENODEV;
+ if (!driver
+ // FIXME if otg, check: driver->is_otg
+ || driver->speed < USB_SPEED_FULL
+ || !driver->bind
+ || !driver->unbind
+ || !driver->setup)
+ return -EINVAL;
+
+ spin_lock_irqsave(&udc->lock, flags);
+ if (udc->driver) {
+ spin_unlock_irqrestore(&udc->lock, flags);
+ return -EBUSY;
+ }
+
+ /* reset state */
+ list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) {
+ ep->irqs = 0;
+ if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC)
+ continue;
+ use_ep(ep, 0);
+ UDC_CTRL_REG = UDC_SET_HALT;
+ }
+ udc->ep0_pending = 0;
+ udc->ep[0].irqs = 0;
+ udc->softconnect = 1;
+
+ /* hook up the driver */
+ driver->driver.bus = 0;
+ udc->driver = driver;
+ udc->gadget.dev.driver = &driver->driver;
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ status = driver->bind (&udc->gadget);
+ if (status) {
+ DBG("bind to %s --> %d\n", driver->driver.name, status);
+ udc->gadget.dev.driver = 0;
+ udc->driver = 0;
+ goto done;
+ }
+ DBG("bound to driver %s\n", driver->driver.name);
+
+ UDC_IRQ_SRC_REG = UDC_IRQ_SRC_MASK;
+
+ /* connect to bus through transceiver */
+ if (udc->transceiver) {
+ status = otg_set_peripheral(udc->transceiver, &udc->gadget);
+ if (status < 0) {
+ ERR("can't bind to transceiver\n");
+ driver->unbind (&udc->gadget);
+ udc->gadget.dev.driver = 0;
+ udc->driver = 0;
+ goto done;
+ }
+ } else {
+ if (can_pullup(udc))
+ pullup_enable (udc);
+ else
+ pullup_disable (udc);
+ }
+
+ /* boards that don't have VBUS sensing can't autogate 48MHz;
+ * can't enter deep sleep while a gadget driver is active.
+ */
+ if (machine_is_omap_innovator() || machine_is_omap_osk())
+ omap_vbus_session(&udc->gadget, 1);
+
+done:
+ return status;
+}
+EXPORT_SYMBOL(usb_gadget_register_driver);
+
+int usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
+{
+ unsigned long flags;
+ int status = -ENODEV;
+
+ if (!udc)
+ return -ENODEV;
+ if (!driver || driver != udc->driver)
+ return -EINVAL;
+
+ if (machine_is_omap_innovator() || machine_is_omap_osk())
+ omap_vbus_session(&udc->gadget, 0);
+
+ if (udc->transceiver)
+ (void) otg_set_peripheral(udc->transceiver, 0);
+ else
+ pullup_disable(udc);
+
+ spin_lock_irqsave(&udc->lock, flags);
+ udc_quiesce(udc);
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ driver->unbind(&udc->gadget);
+ udc->gadget.dev.driver = 0;
+ udc->driver = 0;
+
+
+ DBG("unregistered driver '%s'\n", driver->driver.name);
+ return status;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+#include <linux/seq_file.h>
+
+static const char proc_filename[] = "driver/udc";
+
+#define FOURBITS "%s%s%s%s"
+#define EIGHTBITS FOURBITS FOURBITS
+
+static void proc_ep_show(struct seq_file *s, struct omap_ep *ep)
+{
+ u16 stat_flg;
+ struct omap_req *req;
+ char buf[20];
+
+ use_ep(ep, 0);
+
+ if (use_dma && ep->has_dma)
+ snprintf(buf, sizeof buf, "(%cxdma%d lch%d) ",
+ (ep->bEndpointAddress & USB_DIR_IN) ? 't' : 'r',
+ ep->dma_channel - 1, ep->lch);
+ else
+ buf[0] = 0;
+
+ stat_flg = UDC_STAT_FLG_REG;
+ seq_printf(s,
+ "\n%s %s%s%sirqs %ld stat %04x " EIGHTBITS FOURBITS "%s\n",
+ ep->name, buf,
+ ep->double_buf ? "dbuf " : "",
+ ({char *s; switch(ep->ackwait){
+ case 0: s = ""; break;
+ case 1: s = "(ackw) "; break;
+ case 2: s = "(ackw2) "; break;
+ default: s = "(?) "; break;
+ } s;}),
+ ep->irqs, stat_flg,
+ (stat_flg & UDC_NO_RXPACKET) ? "no_rxpacket " : "",
+ (stat_flg & UDC_MISS_IN) ? "miss_in " : "",
+ (stat_flg & UDC_DATA_FLUSH) ? "data_flush " : "",
+ (stat_flg & UDC_ISO_ERR) ? "iso_err " : "",
+ (stat_flg & UDC_ISO_FIFO_EMPTY) ? "iso_fifo_empty " : "",
+ (stat_flg & UDC_ISO_FIFO_FULL) ? "iso_fifo_full " : "",
+ (stat_flg & UDC_EP_HALTED) ? "HALT " : "",
+ (stat_flg & UDC_STALL) ? "STALL " : "",
+ (stat_flg & UDC_NAK) ? "NAK " : "",
+ (stat_flg & UDC_ACK) ? "ACK " : "",
+ (stat_flg & UDC_FIFO_EN) ? "fifo_en " : "",
+ (stat_flg & UDC_NON_ISO_FIFO_EMPTY) ? "fifo_empty " : "",
+ (stat_flg & UDC_NON_ISO_FIFO_FULL) ? "fifo_full " : "");
+
+ if (list_empty (&ep->queue))
+ seq_printf(s, "\t(queue empty)\n");
+ else
+ list_for_each_entry (req, &ep->queue, queue) {
+ unsigned length = req->req.actual;
+
+ if (use_dma && buf[0]) {
+ length += ((ep->bEndpointAddress & USB_DIR_IN)
+ ? dma_src_len : dma_dest_len)
+ (ep, req->req.dma + length);
+ buf[0] = 0;
+ }
+ seq_printf(s, "\treq %p len %d/%d buf %p\n",
+ &req->req, length,
+ req->req.length, req->req.buf);
+ }
+}
+
+static char *trx_mode(unsigned m, int enabled)
+{
+ switch (m) {
+ case 0: return enabled ? "*6wire" : "unused";
+ case 1: return "4wire";
+ case 2: return "3wire";
+ case 3: return "6wire";
+ default: return "unknown";
+ }
+}
+
+static int proc_otg_show(struct seq_file *s)
+{
+ u32 tmp;
+ u32 trans;
+
+ tmp = OTG_REV_REG;
+ trans = USB_TRANSCEIVER_CTRL_REG;
+ seq_printf(s, "OTG rev %d.%d, transceiver_ctrl %03x\n",
+ tmp >> 4, tmp & 0xf, trans);
+ tmp = OTG_SYSCON_1_REG;
+ seq_printf(s, "otg_syscon1 %08x usb2 %s, usb1 %s, usb0 %s,"
+ FOURBITS "\n", tmp,
+ trx_mode(USB2_TRX_MODE(tmp), trans & CONF_USB2_UNI_R),
+ trx_mode(USB1_TRX_MODE(tmp), trans & CONF_USB1_UNI_R),
+ (USB0_TRX_MODE(tmp) == 0)
+ ? "internal"
+ : trx_mode(USB0_TRX_MODE(tmp), 1),
+ (tmp & OTG_IDLE_EN) ? " !otg" : "",
+ (tmp & HST_IDLE_EN) ? " !host" : "",
+ (tmp & DEV_IDLE_EN) ? " !dev" : "",
+ (tmp & OTG_RESET_DONE) ? " reset_done" : " reset_active");
+ tmp = OTG_SYSCON_2_REG;
+ seq_printf(s, "otg_syscon2 %08x%s" EIGHTBITS
+ " b_ase_brst=%d hmc=%d\n", tmp,
+ (tmp & OTG_EN) ? " otg_en" : "",
+ (tmp & USBX_SYNCHRO) ? " synchro" : "",
+ // much more SRP stuff
+ (tmp & SRP_DATA) ? " srp_data" : "",
+ (tmp & SRP_VBUS) ? " srp_vbus" : "",
+ (tmp & OTG_PADEN) ? " otg_paden" : "",
+ (tmp & HMC_PADEN) ? " hmc_paden" : "",
+ (tmp & UHOST_EN) ? " uhost_en" : "",
+ (tmp & HMC_TLLSPEED) ? " tllspeed" : "",
+ (tmp & HMC_TLLATTACH) ? " tllattach" : "",
+ B_ASE_BRST(tmp),
+ OTG_HMC(tmp));
+ tmp = OTG_CTRL_REG;
+ seq_printf(s, "otg_ctrl %06x" EIGHTBITS EIGHTBITS "%s\n", tmp,
+ (tmp & OTG_ASESSVLD) ? " asess" : "",
+ (tmp & OTG_BSESSEND) ? " bsess_end" : "",
+ (tmp & OTG_BSESSVLD) ? " bsess" : "",
+ (tmp & OTG_VBUSVLD) ? " vbus" : "",
+ (tmp & OTG_ID) ? " id" : "",
+ (tmp & OTG_DRIVER_SEL) ? " DEVICE" : " HOST",
+ (tmp & OTG_A_SETB_HNPEN) ? " a_setb_hnpen" : "",
+ (tmp & OTG_A_BUSREQ) ? " a_bus" : "",
+ (tmp & OTG_B_HNPEN) ? " b_hnpen" : "",
+ (tmp & OTG_B_BUSREQ) ? " b_bus" : "",
+ (tmp & OTG_BUSDROP) ? " busdrop" : "",
+ (tmp & OTG_PULLDOWN) ? " down" : "",
+ (tmp & OTG_PULLUP) ? " up" : "",
+ (tmp & OTG_DRV_VBUS) ? " drv" : "",
+ (tmp & OTG_PD_VBUS) ? " pd_vb" : "",
+ (tmp & OTG_PU_VBUS) ? " pu_vb" : "",
+ (tmp & OTG_PU_ID) ? " pu_id" : ""
+ );
+ tmp = OTG_IRQ_EN_REG;
+ seq_printf(s, "otg_irq_en %04x" "\n", tmp);
+ tmp = OTG_IRQ_SRC_REG;
+ seq_printf(s, "otg_irq_src %04x" "\n", tmp);
+ tmp = OTG_OUTCTRL_REG;
+ seq_printf(s, "otg_outctrl %04x" "\n", tmp);
+ tmp = OTG_TEST_REG;
+ seq_printf(s, "otg_test %04x" "\n", tmp);
+}
+
+static int proc_udc_show(struct seq_file *s, void *_)
+{
+ u32 tmp;
+ struct omap_ep *ep;
+ unsigned long flags;
+
+ spin_lock_irqsave(&udc->lock, flags);
+
+ seq_printf(s, "%s, version: " DRIVER_VERSION
+#ifdef USE_ISO
+ " (iso)"
+#endif
+ "%s\n",
+ driver_desc,
+ use_dma ? " (dma)" : "");
+
+ tmp = UDC_REV_REG & 0xff;
+ seq_printf(s,
+ "UDC rev %d.%d, fifo mode %d, gadget %s\n"
+ "hmc %d, transceiver %s\n",
+ tmp >> 4, tmp & 0xf,
+ fifo_mode,
+ udc->driver ? udc->driver->driver.name : "(none)",
+ HMC,
+ udc->transceiver ? udc->transceiver->label : "(none)");
+ seq_printf(s, "ULPD control %04x req %04x status %04x\n",
+ __REG16(ULPD_CLOCK_CTRL),
+ __REG16(ULPD_SOFT_REQ),
+ __REG16(ULPD_STATUS_REQ));
+
+ /* OTG controller registers */
+ if (!cpu_is_omap15xx())
+ proc_otg_show(s);
+
+ tmp = UDC_SYSCON1_REG;
+ seq_printf(s, "\nsyscon1 %04x" EIGHTBITS "\n", tmp,
+ (tmp & UDC_CFG_LOCK) ? " cfg_lock" : "",
+ (tmp & UDC_DATA_ENDIAN) ? " data_endian" : "",
+ (tmp & UDC_DMA_ENDIAN) ? " dma_endian" : "",
+ (tmp & UDC_NAK_EN) ? " nak" : "",
+ (tmp & UDC_AUTODECODE_DIS) ? " autodecode_dis" : "",
+ (tmp & UDC_SELF_PWR) ? " self_pwr" : "",
+ (tmp & UDC_SOFF_DIS) ? " soff_dis" : "",
+ (tmp & UDC_PULLUP_EN) ? " PULLUP" : "");
+ // syscon2 is write-only
+
+ /* UDC controller registers */
+ if (!(tmp & UDC_PULLUP_EN)) {
+ seq_printf(s, "(suspended)\n");
+ spin_unlock_irqrestore(&udc->lock, flags);
+ return 0;
+ }
+
+ tmp = UDC_DEVSTAT_REG;
+ seq_printf(s, "devstat %04x" EIGHTBITS "%s%s\n", tmp,
+ (tmp & UDC_B_HNP_ENABLE) ? " b_hnp" : "",
+ (tmp & UDC_A_HNP_SUPPORT) ? " a_hnp" : "",
+ (tmp & UDC_A_ALT_HNP_SUPPORT) ? " a_alt_hnp" : "",
+ (tmp & UDC_R_WK_OK) ? " r_wk_ok" : "",
+ (tmp & UDC_USB_RESET) ? " usb_reset" : "",
+ (tmp & UDC_SUS) ? " SUS" : "",
+ (tmp & UDC_CFG) ? " CFG" : "",
+ (tmp & UDC_ADD) ? " ADD" : "",
+ (tmp & UDC_DEF) ? " DEF" : "",
+ (tmp & UDC_ATT) ? " ATT" : "");
+ seq_printf(s, "sof %04x\n", UDC_SOF_REG);
+ tmp = UDC_IRQ_EN_REG;
+ seq_printf(s, "irq_en %04x" FOURBITS "%s\n", tmp,
+ (tmp & UDC_SOF_IE) ? " sof" : "",
+ (tmp & UDC_EPN_RX_IE) ? " epn_rx" : "",
+ (tmp & UDC_EPN_TX_IE) ? " epn_tx" : "",
+ (tmp & UDC_DS_CHG_IE) ? " ds_chg" : "",
+ (tmp & UDC_EP0_IE) ? " ep0" : "");
+ tmp = UDC_IRQ_SRC_REG;
+ seq_printf(s, "irq_src %04x" EIGHTBITS "%s%s\n", tmp,
+ (tmp & UDC_TXN_DONE) ? " txn_done" : "",
+ (tmp & UDC_RXN_CNT) ? " rxn_cnt" : "",
+ (tmp & UDC_RXN_EOT) ? " rxn_eot" : "",
+ (tmp & UDC_SOF) ? " sof" : "",
+ (tmp & UDC_EPN_RX) ? " epn_rx" : "",
+ (tmp & UDC_EPN_TX) ? " epn_tx" : "",
+ (tmp & UDC_DS_CHG) ? " ds_chg" : "",
+ (tmp & UDC_SETUP) ? " setup" : "",
+ (tmp & UDC_EP0_RX) ? " ep0out" : "",
+ (tmp & UDC_EP0_TX) ? " ep0in" : "");
+ if (use_dma) {
+ unsigned i;
+
+ tmp = UDC_DMA_IRQ_EN_REG;
+ seq_printf(s, "dma_irq_en %04x%s" EIGHTBITS "\n", tmp,
+ (tmp & UDC_TX_DONE_IE(3)) ? " tx2_done" : "",
+ (tmp & UDC_RX_CNT_IE(3)) ? " rx2_cnt" : "",
+ (tmp & UDC_RX_EOT_IE(3)) ? " rx2_eot" : "",
+
+ (tmp & UDC_TX_DONE_IE(2)) ? " tx1_done" : "",
+ (tmp & UDC_RX_CNT_IE(2)) ? " rx1_cnt" : "",
+ (tmp & UDC_RX_EOT_IE(2)) ? " rx1_eot" : "",
+
+ (tmp & UDC_TX_DONE_IE(1)) ? " tx0_done" : "",
+ (tmp & UDC_RX_CNT_IE(1)) ? " rx0_cnt" : "",
+ (tmp & UDC_RX_EOT_IE(1)) ? " rx0_eot" : "");
+
+ tmp = UDC_RXDMA_CFG_REG;
+ seq_printf(s, "rxdma_cfg %04x\n", tmp);
+ if (tmp) {
+ for (i = 0; i < 3; i++) {
+ if ((tmp & (0x0f << (i * 4))) == 0)
+ continue;
+ seq_printf(s, "rxdma[%d] %04x\n", i,
+ UDC_RXDMA_REG(i + 1));
+ }
+ }
+ tmp = UDC_TXDMA_CFG_REG;
+ seq_printf(s, "txdma_cfg %04x\n", tmp);
+ if (tmp) {
+ for (i = 0; i < 3; i++) {
+ if (!(tmp & (0x0f << (i * 4))))
+ continue;
+ seq_printf(s, "txdma[%d] %04x\n", i,
+ UDC_TXDMA_REG(i + 1));
+ }
+ }
+ }
+
+ tmp = UDC_DEVSTAT_REG;
+ if (tmp & UDC_ATT) {
+ proc_ep_show(s, &udc->ep[0]);
+ if (tmp & UDC_ADD) {
+ list_for_each_entry (ep, &udc->gadget.ep_list,
+ ep.ep_list) {
+ if (ep->desc)
+ proc_ep_show(s, ep);
+ }
+ }
+ }
+ spin_unlock_irqrestore(&udc->lock, flags);
+ return 0;
+}
+
+static int proc_udc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, proc_udc_show, 0);
+}
+
+static struct file_operations proc_ops = {
+ .open = proc_udc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static void create_proc_file(void)
+{
+ struct proc_dir_entry *pde;
+
+ pde = create_proc_entry (proc_filename, 0, NULL);
+ if (pde)
+ pde->proc_fops = &proc_ops;
+}
+
+static void remove_proc_file(void)
+{
+ remove_proc_entry(proc_filename, 0);
+}
+
+#else
+
+static inline void create_proc_file(void) {}
+static inline void remove_proc_file(void) {}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/* Before this controller can enumerate, we need to pick an endpoint
+ * configuration, or "fifo_mode" That involves allocating 2KB of packet
+ * buffer space among the endpoints we'll be operating.
+ */
+static unsigned __init
+omap_ep_setup(char *name, u8 addr, u8 type,
+ unsigned buf, unsigned maxp, int dbuf)
+{
+ struct omap_ep *ep;
+ u16 epn_rxtx = 0;
+
+ /* OUT endpoints first, then IN */
+ ep = &udc->ep[addr & 0xf];
+ if (addr & USB_DIR_IN)
+ ep += 16;
+
+ /* in case of ep init table bugs */
+ BUG_ON(ep->name[0]);
+
+ /* chip setup ... bit values are same for IN, OUT */
+ if (type == USB_ENDPOINT_XFER_ISOC) {
+ switch (maxp) {
+ case 8: epn_rxtx = 0 << 12; break;
+ case 16: epn_rxtx = 1 << 12; break;
+ case 32: epn_rxtx = 2 << 12; break;
+ case 64: epn_rxtx = 3 << 12; break;
+ case 128: epn_rxtx = 4 << 12; break;
+ case 256: epn_rxtx = 5 << 12; break;
+ case 512: epn_rxtx = 6 << 12; break;
+ default: BUG();
+ }
+ epn_rxtx |= UDC_EPN_RX_ISO;
+ dbuf = 1;
+ } else {
+ /* double-buffering "not supported" on 15xx,
+ * and ignored for PIO-IN on 16xx
+ */
+ if (!use_dma || cpu_is_omap15xx())
+ dbuf = 0;
+
+ switch (maxp) {
+ case 8: epn_rxtx = 0 << 12; break;
+ case 16: epn_rxtx = 1 << 12; break;
+ case 32: epn_rxtx = 2 << 12; break;
+ case 64: epn_rxtx = 3 << 12; break;
+ default: BUG();
+ }
+ if (dbuf && addr)
+ epn_rxtx |= UDC_EPN_RX_DB;
+ init_timer(&ep->timer);
+ ep->timer.function = pio_out_timer;
+ ep->timer.data = (unsigned long) ep;
+ }
+ if (addr)
+ epn_rxtx |= UDC_EPN_RX_VALID;
+ BUG_ON(buf & 0x07);
+ epn_rxtx |= buf >> 3;
+
+ DBG("%s addr %02x rxtx %04x maxp %d%s buf %d\n",
+ name, addr, epn_rxtx, maxp, dbuf ? "x2" : "", buf);
+
+ if (addr & USB_DIR_IN)
+ UDC_EP_TX_REG(addr & 0xf) = epn_rxtx;
+ else
+ UDC_EP_RX_REG(addr) = epn_rxtx;
+
+ /* next endpoint's buffer starts after this one's */
+ buf += maxp;
+ if (dbuf)
+ buf += maxp;
+ BUG_ON(buf > 2048);
+
+ /* set up driver data structures */
+ BUG_ON(strlen(name) >= sizeof ep->name);
+ strlcpy(ep->name, name, sizeof ep->name);
+ INIT_LIST_HEAD(&ep->queue);
+ INIT_LIST_HEAD(&ep->iso);
+ ep->bEndpointAddress = addr;
+ ep->bmAttributes = type;
+ ep->double_buf = dbuf;
+ ep->udc = udc;
+
+ ep->ep.name = ep->name;
+ ep->ep.ops = &omap_ep_ops;
+ ep->ep.maxpacket = ep->maxpacket = maxp;
+ list_add_tail (&ep->ep.ep_list, &udc->gadget.ep_list);
+
+ return buf;
+}
+
+static void omap_udc_release(struct device *dev)
+{
+ complete(udc->done);
+ kfree (udc);
+ udc = 0;
+}
+
+static int __init
+omap_udc_setup(struct platform_device *odev, struct otg_transceiver *xceiv)
+{
+ unsigned tmp, buf;
+
+ /* abolish any previous hardware state */
+ UDC_SYSCON1_REG = 0;
+ UDC_IRQ_EN_REG = 0;
+ UDC_IRQ_SRC_REG = UDC_IRQ_SRC_MASK;
+ UDC_DMA_IRQ_EN_REG = 0;
+ UDC_RXDMA_CFG_REG = 0;
+ UDC_TXDMA_CFG_REG = 0;
+
+ /* UDC_PULLUP_EN gates the chip clock */
+ // OTG_SYSCON_1_REG |= DEV_IDLE_EN;
+
+ udc = kmalloc (sizeof *udc, SLAB_KERNEL);
+ if (!udc)
+ return -ENOMEM;
+
+ memset(udc, 0, sizeof *udc);
+ spin_lock_init (&udc->lock);
+
+ udc->gadget.ops = &omap_gadget_ops;
+ udc->gadget.ep0 = &udc->ep[0].ep;
+ INIT_LIST_HEAD(&udc->gadget.ep_list);
+ INIT_LIST_HEAD(&udc->iso);
+ udc->gadget.speed = USB_SPEED_UNKNOWN;
+ udc->gadget.name = driver_name;
+
+ device_initialize(&udc->gadget.dev);
+ strcpy (udc->gadget.dev.bus_id, "gadget");
+ udc->gadget.dev.release = omap_udc_release;
+ udc->gadget.dev.parent = &odev->dev;
+ if (use_dma)
+ udc->gadget.dev.dma_mask = odev->dev.dma_mask;
+
+ udc->transceiver = xceiv;
+
+ /* ep0 is special; put it right after the SETUP buffer */
+ buf = omap_ep_setup("ep0", 0, USB_ENDPOINT_XFER_CONTROL,
+ 8 /* after SETUP */, 64 /* maxpacket */, 0);
+ list_del_init(&udc->ep[0].ep.ep_list);
+
+ /* initially disable all non-ep0 endpoints */
+ for (tmp = 1; tmp < 15; tmp++) {
+ UDC_EP_RX_REG(tmp) = 0;
+ UDC_EP_TX_REG(tmp) = 0;
+ }
+
+#define OMAP_BULK_EP(name,addr) \
+ buf = omap_ep_setup(name "-bulk", addr, \
+ USB_ENDPOINT_XFER_BULK, buf, 64, 1);
+#define OMAP_INT_EP(name,addr, maxp) \
+ buf = omap_ep_setup(name "-int", addr, \
+ USB_ENDPOINT_XFER_INT, buf, maxp, 0);
+#define OMAP_ISO_EP(name,addr, maxp) \
+ buf = omap_ep_setup(name "-iso", addr, \
+ USB_ENDPOINT_XFER_ISOC, buf, maxp, 1);
+
+ switch (fifo_mode) {
+ case 0:
+ OMAP_BULK_EP("ep1in", USB_DIR_IN | 1);
+ OMAP_BULK_EP("ep2out", USB_DIR_OUT | 2);
+ OMAP_INT_EP("ep3in", USB_DIR_IN | 3, 16);
+ break;
+ case 1:
+ OMAP_BULK_EP("ep1in", USB_DIR_IN | 1);
+ OMAP_BULK_EP("ep2out", USB_DIR_OUT | 2);
+ OMAP_BULK_EP("ep3in", USB_DIR_IN | 3);
+ OMAP_BULK_EP("ep4out", USB_DIR_OUT | 4);
+
+ OMAP_BULK_EP("ep5in", USB_DIR_IN | 5);
+ OMAP_BULK_EP("ep5out", USB_DIR_OUT | 5);
+ OMAP_BULK_EP("ep6in", USB_DIR_IN | 6);
+ OMAP_BULK_EP("ep6out", USB_DIR_OUT | 6);
+
+ OMAP_BULK_EP("ep7in", USB_DIR_IN | 7);
+ OMAP_BULK_EP("ep7out", USB_DIR_OUT | 7);
+ OMAP_BULK_EP("ep8in", USB_DIR_IN | 8);
+ OMAP_BULK_EP("ep8out", USB_DIR_OUT | 8);
+
+ OMAP_INT_EP("ep9in", USB_DIR_IN | 9, 16);
+ OMAP_INT_EP("ep10out", USB_DIR_IN | 10, 16);
+ OMAP_INT_EP("ep11in", USB_DIR_IN | 9, 16);
+ OMAP_INT_EP("ep12out", USB_DIR_IN | 10, 16);
+ break;
+
+#ifdef USE_ISO
+ case 2: /* mixed iso/bulk */
+ OMAP_ISO_EP("ep1in", USB_DIR_IN | 1, 256);
+ OMAP_ISO_EP("ep2out", USB_DIR_OUT | 2, 256);
+ OMAP_ISO_EP("ep3in", USB_DIR_IN | 3, 128);
+ OMAP_ISO_EP("ep4out", USB_DIR_OUT | 4, 128);
+
+ OMAP_INT_EP("ep5in", USB_DIR_IN | 5, 16);
+
+ OMAP_BULK_EP("ep6in", USB_DIR_IN | 6);
+ OMAP_BULK_EP("ep7out", USB_DIR_OUT | 7);
+ OMAP_INT_EP("ep8in", USB_DIR_IN | 8, 16);
+ break;
+ case 3: /* mixed bulk/iso */
+ OMAP_BULK_EP("ep1in", USB_DIR_IN | 1);
+ OMAP_BULK_EP("ep2out", USB_DIR_OUT | 2);
+ OMAP_INT_EP("ep3in", USB_DIR_IN | 3, 16);
+
+ OMAP_BULK_EP("ep4in", USB_DIR_IN | 4);
+ OMAP_BULK_EP("ep5out", USB_DIR_OUT | 5);
+ OMAP_INT_EP("ep6in", USB_DIR_IN | 6, 16);
+
+ OMAP_ISO_EP("ep7in", USB_DIR_IN | 7, 256);
+ OMAP_ISO_EP("ep8out", USB_DIR_OUT | 8, 256);
+ OMAP_INT_EP("ep9in", USB_DIR_IN | 9, 16);
+ break;
+#endif
+
+ /* add more modes as needed */
+
+ default:
+ ERR("unsupported fifo_mode #%d\n", fifo_mode);
+ return -ENODEV;
+ }
+ UDC_SYSCON1_REG = UDC_CFG_LOCK|UDC_SELF_PWR;
+ INFO("fifo mode %d, %d bytes not used\n", fifo_mode, 2048 - buf);
+ return 0;
+}
+
+static int __init omap_udc_probe(struct device *dev)
+{
+ struct platform_device *odev = to_platform_device(dev);
+ int status = -ENODEV;
+ int hmc;
+ struct otg_transceiver *xceiv = 0;
+ const char *type = 0;
+ struct omap_usb_config *config = dev->platform_data;
+
+ /* NOTE: "knows" the order of the resources! */
+ if (!request_mem_region(odev->resource[0].start,
+ odev->resource[0].end - odev->resource[0].start + 1,
+ driver_name)) {
+ DBG("request_mem_region failed\n");
+ return -EBUSY;
+ }
+
+ INFO("OMAP UDC rev %d.%d%s\n",
+ UDC_REV_REG >> 4, UDC_REV_REG & 0xf,
+ config->otg ? ", Mini-AB" : "");
+
+ /* use the mode given to us by board init code */
+ if (cpu_is_omap15xx()) {
+ hmc = HMC_1510;
+ type = "(unknown)";
+
+ if (machine_is_omap_innovator()) {
+ /* just set up software VBUS detect, and then
+ * later rig it so we always report VBUS.
+ * FIXME without really sensing VBUS, we can't
+ * know when to turn PULLUP_EN on/off; and that
+ * means we always "need" the 48MHz clock.
+ */
+ u32 tmp = FUNC_MUX_CTRL_0_REG;
+
+ FUNC_MUX_CTRL_0_REG &= ~VBUS_CTRL_1510;
+ tmp |= VBUS_MODE_1510;
+ tmp &= ~VBUS_CTRL_1510;
+ FUNC_MUX_CTRL_0_REG = tmp;
+ }
+ } else {
+ hmc = HMC_1610;
+ switch (hmc) {
+ case 3:
+ case 11:
+ case 16:
+ case 19:
+ case 25:
+ xceiv = otg_get_transceiver();
+ if (!xceiv) {
+ DBG("external transceiver not registered!\n");
+ if (config->otg)
+ goto cleanup0;
+ type = "(unknown external)";
+ } else
+ type = xceiv->label;
+ break;
+ case 0: /* POWERUP DEFAULT == 0 */
+ case 4:
+ case 12:
+ case 20:
+ type = "INTEGRATED";
+ break;
+ case 21: /* internal loopback */
+ type = "(loopback)";
+ break;
+ case 14: /* transceiverless */
+ type = "(none)";
+ break;
+
+ default:
+ ERR("unrecognized UDC HMC mode %d\n", hmc);
+ return -ENODEV;
+ }
+ }
+ INFO("hmc mode %d, transceiver %s\n", hmc, type);
+
+ /* a "gadget" abstracts/virtualizes the controller */
+ status = omap_udc_setup(odev, xceiv);
+ if (status) {
+ goto cleanup0;
+ }
+ xceiv = 0;
+ // "udc" is now valid
+ pullup_disable(udc);
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+ udc->gadget.is_otg = (config->otg != 0);
+#endif
+
+ /* USB general purpose IRQ: ep0, state changes, dma, etc */
+ status = request_irq(odev->resource[1].start, omap_udc_irq,
+ SA_SAMPLE_RANDOM, driver_name, udc);
+ if (status != 0) {
+ ERR( "can't get irq %ld, err %d\n",
+ odev->resource[1].start, status);
+ goto cleanup1;
+ }
+
+ /* USB "non-iso" IRQ (PIO for all but ep0) */
+ status = request_irq(odev->resource[2].start, omap_udc_pio_irq,
+ SA_SAMPLE_RANDOM, "omap_udc pio", udc);
+ if (status != 0) {
+ ERR( "can't get irq %ld, err %d\n",
+ odev->resource[2].start, status);
+ goto cleanup2;
+ }
+#ifdef USE_ISO
+ status = request_irq(odev->resource[3].start, omap_udc_iso_irq,
+ SA_INTERRUPT, "omap_udc iso", udc);
+ if (status != 0) {
+ ERR("can't get irq %ld, err %d\n",
+ odev->resource[3].start, status);
+ goto cleanup3;
+ }
+#endif
+
+ create_proc_file();
+ device_add(&udc->gadget.dev);
+ return 0;
+
+#ifdef USE_ISO
+cleanup3:
+ free_irq(odev->resource[2].start, udc);
+#endif
+
+cleanup2:
+ free_irq(odev->resource[1].start, udc);
+
+cleanup1:
+ kfree (udc);
+ udc = 0;
+
+cleanup0:
+ if (xceiv)
+ put_device(xceiv->dev);
+ release_mem_region(odev->resource[0].start,
+ odev->resource[0].end - odev->resource[0].start + 1);
+ return status;
+}
+
+static int __exit omap_udc_remove(struct device *dev)
+{
+ struct platform_device *odev = to_platform_device(dev);
+ DECLARE_COMPLETION(done);
+
+ if (!udc)
+ return -ENODEV;
+
+ udc->done = &done;
+
+ pullup_disable(udc);
+ if (udc->transceiver) {
+ put_device(udc->transceiver->dev);
+ udc->transceiver = 0;
+ }
+ UDC_SYSCON1_REG = 0;
+
+ remove_proc_file();
+
+#ifdef USE_ISO
+ free_irq(odev->resource[3].start, udc);
+#endif
+ free_irq(odev->resource[2].start, udc);
+ free_irq(odev->resource[1].start, udc);
+
+ release_mem_region(odev->resource[0].start,
+ odev->resource[0].end - odev->resource[0].start + 1);
+
+ device_unregister(&udc->gadget.dev);
+ wait_for_completion(&done);
+
+ return 0;
+}
+
+/* suspend/resume/wakeup from sysfs (echo > power/state) */
+
+static int omap_udc_suspend(struct device *dev, u32 state, u32 level)
+{
+ if (level != 0)
+ return 0;
+
+ DBG("suspend, state %d\n", state);
+ omap_pullup(&udc->gadget, 0);
+ udc->gadget.dev.power.power_state = 3;
+ udc->gadget.dev.parent->power.power_state = 3;
+ return 0;
+}
+
+static int omap_udc_resume(struct device *dev, u32 level)
+{
+ if (level != 0)
+ return 0;
+
+ DBG("resume + wakeup/SRP\n");
+ udc->gadget.dev.parent->power.power_state = 0;
+ udc->gadget.dev.power.power_state = 0;
+ omap_pullup(&udc->gadget, 1);
+
+ /* maybe the host would enumerate us if we nudged it */
+ msleep(100);
+ return omap_wakeup(&udc->gadget);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct device_driver udc_driver = {
+ .name = (char *) driver_name,
+ .bus = &platform_bus_type,
+ .probe = omap_udc_probe,
+ .remove = __exit_p(omap_udc_remove),
+ .suspend = omap_udc_suspend,
+ .resume = omap_udc_resume,
+};
+
+static int __init udc_init(void)
+{
+ INFO("%s, version: " DRIVER_VERSION
+#ifdef USE_ISO
+ " (iso)"
+#endif
+ "%s\n", driver_desc,
+ use_dma ? " (dma)" : "");
+ return driver_register(&udc_driver);
+}
+module_init(udc_init);
+
+static void __exit udc_exit(void)
+{
+ driver_unregister(&udc_driver);
+}
+module_exit(udc_exit);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/usb/gadget/omap_udc.h b/drivers/usb/gadget/omap_udc.h
new file mode 100644
index 00000000000..c9e68541622
--- /dev/null
+++ b/drivers/usb/gadget/omap_udc.h
@@ -0,0 +1,208 @@
+/*
+ * omap_udc.h -- for omap 3.2 udc, with OTG support
+ *
+ * 2004 (C) Texas Instruments, Inc.
+ * 2004 (C) David Brownell
+ */
+
+/*
+ * USB device/endpoint management registers
+ */
+#define UDC_REG(offset) __REG16(UDC_BASE + (offset))
+
+#define UDC_REV_REG UDC_REG(0x0) /* Revision */
+#define UDC_EP_NUM_REG UDC_REG(0x4) /* Which endpoint */
+# define UDC_SETUP_SEL (1 << 6)
+# define UDC_EP_SEL (1 << 5)
+# define UDC_EP_DIR (1 << 4)
+ /* low 4 bits for endpoint number */
+#define UDC_DATA_REG UDC_REG(0x08) /* Endpoint FIFO */
+#define UDC_CTRL_REG UDC_REG(0x0C) /* Endpoint control */
+# define UDC_CLR_HALT (1 << 7)
+# define UDC_SET_HALT (1 << 6)
+# define UDC_SET_FIFO_EN (1 << 2)
+# define UDC_CLR_EP (1 << 1)
+# define UDC_RESET_EP (1 << 0)
+#define UDC_STAT_FLG_REG UDC_REG(0x10) /* Endpoint status */
+# define UDC_NO_RXPACKET (1 << 15)
+# define UDC_MISS_IN (1 << 14)
+# define UDC_DATA_FLUSH (1 << 13)
+# define UDC_ISO_ERR (1 << 12)
+# define UDC_ISO_FIFO_EMPTY (1 << 9)
+# define UDC_ISO_FIFO_FULL (1 << 8)
+# define UDC_EP_HALTED (1 << 6)
+# define UDC_STALL (1 << 5)
+# define UDC_NAK (1 << 4)
+# define UDC_ACK (1 << 3)
+# define UDC_FIFO_EN (1 << 2)
+# define UDC_NON_ISO_FIFO_EMPTY (1 << 1)
+# define UDC_NON_ISO_FIFO_FULL (1 << 0)
+#define UDC_RXFSTAT_REG UDC_REG(0x14) /* OUT bytecount */
+#define UDC_SYSCON1_REG UDC_REG(0x18) /* System config 1 */
+# define UDC_CFG_LOCK (1 << 8)
+# define UDC_DATA_ENDIAN (1 << 7)
+# define UDC_DMA_ENDIAN (1 << 6)
+# define UDC_NAK_EN (1 << 4)
+# define UDC_AUTODECODE_DIS (1 << 3)
+# define UDC_SELF_PWR (1 << 2)
+# define UDC_SOFF_DIS (1 << 1)
+# define UDC_PULLUP_EN (1 << 0)
+#define UDC_SYSCON2_REG UDC_REG(0x1C) /* System config 2 */
+# define UDC_RMT_WKP (1 << 6)
+# define UDC_STALL_CMD (1 << 5)
+# define UDC_DEV_CFG (1 << 3)
+# define UDC_CLR_CFG (1 << 2)
+#define UDC_DEVSTAT_REG UDC_REG(0x20) /* Device status */
+# define UDC_B_HNP_ENABLE (1 << 9)
+# define UDC_A_HNP_SUPPORT (1 << 8)
+# define UDC_A_ALT_HNP_SUPPORT (1 << 7)
+# define UDC_R_WK_OK (1 << 6)
+# define UDC_USB_RESET (1 << 5)
+# define UDC_SUS (1 << 4)
+# define UDC_CFG (1 << 3)
+# define UDC_ADD (1 << 2)
+# define UDC_DEF (1 << 1)
+# define UDC_ATT (1 << 0)
+#define UDC_SOF_REG UDC_REG(0x24) /* Start of frame */
+# define UDC_FT_LOCK (1 << 12)
+# define UDC_TS_OK (1 << 11)
+# define UDC_TS 0x03ff
+#define UDC_IRQ_EN_REG UDC_REG(0x28) /* Interrupt enable */
+# define UDC_SOF_IE (1 << 7)
+# define UDC_EPN_RX_IE (1 << 5)
+# define UDC_EPN_TX_IE (1 << 4)
+# define UDC_DS_CHG_IE (1 << 3)
+# define UDC_EP0_IE (1 << 0)
+#define UDC_DMA_IRQ_EN_REG UDC_REG(0x2C) /* DMA irq enable */
+ /* rx/tx dma channels numbered 1-3 not 0-2 */
+# define UDC_TX_DONE_IE(n) (1 << (4 * (n) - 2))
+# define UDC_RX_CNT_IE(n) (1 << (4 * (n) - 3))
+# define UDC_RX_EOT_IE(n) (1 << (4 * (n) - 4))
+#define UDC_IRQ_SRC_REG UDC_REG(0x30) /* Interrupt source */
+# define UDC_TXN_DONE (1 << 10)
+# define UDC_RXN_CNT (1 << 9)
+# define UDC_RXN_EOT (1 << 8)
+# define UDC_SOF (1 << 7)
+# define UDC_EPN_RX (1 << 5)
+# define UDC_EPN_TX (1 << 4)
+# define UDC_DS_CHG (1 << 3)
+# define UDC_SETUP (1 << 2)
+# define UDC_EP0_RX (1 << 1)
+# define UDC_EP0_TX (1 << 0)
+# define UDC_IRQ_SRC_MASK 0x7bf
+#define UDC_EPN_STAT_REG UDC_REG(0x34) /* EP irq status */
+#define UDC_DMAN_STAT_REG UDC_REG(0x38) /* DMA irq status */
+# define UDC_DMA_RX_SB (1 << 12)
+# define UDC_DMA_RX_SRC(x) (((x)>>8) & 0xf)
+# define UDC_DMA_TX_SRC(x) (((x)>>0) & 0xf)
+
+
+/* DMA configuration registers: up to three channels in each direction. */
+#define UDC_RXDMA_CFG_REG UDC_REG(0x40) /* 3 eps for RX DMA */
+#define UDC_TXDMA_CFG_REG UDC_REG(0x44) /* 3 eps for TX DMA */
+#define UDC_DATA_DMA_REG UDC_REG(0x48) /* rx/tx fifo addr */
+
+/* rx/tx dma control, numbering channels 1-3 not 0-2 */
+#define UDC_TXDMA_REG(chan) UDC_REG(0x50 - 4 + 4 * (chan))
+# define UDC_TXN_EOT (1 << 15) /* bytes vs packets */
+# define UDC_TXN_START (1 << 14) /* start transfer */
+# define UDC_TXN_TSC 0x03ff /* units in xfer */
+#define UDC_RXDMA_REG(chan) UDC_REG(0x60 - 4 + 4 * (chan))
+# define UDC_RXN_STOP (1 << 15) /* enable EOT irq */
+# define UDC_RXN_TC 0x00ff /* packets in xfer */
+
+
+/*
+ * Endpoint configuration registers (used before CFG_LOCK is set)
+ * UDC_EP_TX_REG(0) is unused
+ */
+#define UDC_EP_RX_REG(endpoint) UDC_REG(0x80 + (endpoint)*4)
+# define UDC_EPN_RX_VALID (1 << 15)
+# define UDC_EPN_RX_DB (1 << 14)
+ /* buffer size in bits 13, 12 */
+# define UDC_EPN_RX_ISO (1 << 11)
+ /* buffer pointer in low 11 bits */
+#define UDC_EP_TX_REG(endpoint) UDC_REG(0xc0 + (endpoint)*4)
+ /* same bitfields as in RX_REG */
+
+/*-------------------------------------------------------------------------*/
+
+struct omap_req {
+ struct usb_request req;
+ struct list_head queue;
+ unsigned dma_bytes;
+ unsigned mapped:1;
+};
+
+struct omap_ep {
+ struct usb_ep ep;
+ struct list_head queue;
+ unsigned long irqs;
+ struct list_head iso;
+ const struct usb_endpoint_descriptor *desc;
+ char name[14];
+ u16 maxpacket;
+ u8 bEndpointAddress;
+ u8 bmAttributes;
+ unsigned double_buf:1;
+ unsigned stopped:1;
+ unsigned fnf:1;
+ unsigned has_dma:1;
+ u8 ackwait;
+ u8 dma_channel;
+ u16 dma_counter;
+ int lch;
+ struct omap_udc *udc;
+ struct timer_list timer;
+};
+
+struct omap_udc {
+ struct usb_gadget gadget;
+ struct usb_gadget_driver *driver;
+ spinlock_t lock;
+ struct omap_ep ep[32];
+ u16 devstat;
+ struct otg_transceiver *transceiver;
+ struct list_head iso;
+ unsigned softconnect:1;
+ unsigned vbus_active:1;
+ unsigned ep0_pending:1;
+ unsigned ep0_in:1;
+ unsigned ep0_set_config:1;
+ unsigned ep0_reset_config:1;
+ unsigned ep0_setup:1;
+
+ struct completion *done;
+};
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef DEBUG
+#define DBG(stuff...) printk(KERN_DEBUG "udc: " stuff)
+#else
+#define DBG(stuff...) do{}while(0)
+#endif
+
+#ifdef VERBOSE
+# define VDBG DBG
+#else
+# define VDBG(stuff...) do{}while(0)
+#endif
+
+#define ERR(stuff...) printk(KERN_ERR "udc: " stuff)
+#define WARN(stuff...) printk(KERN_WARNING "udc: " stuff)
+#define INFO(stuff...) printk(KERN_INFO "udc: " stuff)
+
+/*-------------------------------------------------------------------------*/
+
+#define MOD_CONF_CTRL_0_REG __REG32(MOD_CONF_CTRL_0)
+#define VBUS_W2FC_1510 (1 << 17) /* 0 gpio0, 1 dvdd2 pin */
+
+#define FUNC_MUX_CTRL_0_REG __REG32(FUNC_MUX_CTRL_0)
+#define VBUS_CTRL_1510 (1 << 19) /* 1 connected (software) */
+#define VBUS_MODE_1510 (1 << 18) /* 0 hardware, 1 software */
+
+#define HMC_1510 ((MOD_CONF_CTRL_0_REG >> 1) & 0x3f)
+#define HMC_1610 (OTG_SYSCON_2_REG & 0x3f)
+#define HMC (cpu_is_omap15xx() ? HMC_1510 : HMC_1610)
+
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
new file mode 100644
index 00000000000..6390c5726d8
--- /dev/null
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -0,0 +1,2648 @@
+/*
+ * linux/drivers/usb/gadget/pxa2xx_udc.c
+ * Intel PXA2xx and IXP4xx on-chip full speed USB device controllers
+ *
+ * Copyright (C) 2002 Intrinsyc, Inc. (Frank Becker)
+ * Copyright (C) 2003 Robert Schwebel, Pengutronix
+ * Copyright (C) 2003 Benedikt Spranger, Pengutronix
+ * Copyright (C) 2003 David Brownell
+ * Copyright (C) 2003 Joshua Wise
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#undef DEBUG
+// #define VERBOSE DBG_VERBOSE
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/proc_fs.h>
+#include <linux/mm.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/byteorder.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <asm/unaligned.h>
+#include <asm/hardware.h>
+#include <asm/arch/pxa-regs.h>
+
+#include <linux/usb_ch9.h>
+#include <linux/usb_gadget.h>
+
+#include <asm/arch/udc.h>
+
+
+/*
+ * This driver handles the USB Device Controller (UDC) in Intel's PXA 2xx
+ * series processors. The UDC for the IXP 4xx series is very similar.
+ * There are fifteen endpoints, in addition to ep0.
+ *
+ * Such controller drivers work with a gadget driver. The gadget driver
+ * returns descriptors, implements configuration and data protocols used
+ * by the host to interact with this device, and allocates endpoints to
+ * the different protocol interfaces. The controller driver virtualizes
+ * usb hardware so that the gadget drivers will be more portable.
+ *
+ * This UDC hardware wants to implement a bit too much USB protocol, so
+ * it constrains the sorts of USB configuration change events that work.
+ * The errata for these chips are misleading; some "fixed" bugs from
+ * pxa250 a0/a1 b0/b1/b2 sure act like they're still there.
+ */
+
+#define DRIVER_VERSION "14-Dec-2003"
+#define DRIVER_DESC "PXA 2xx USB Device Controller driver"
+
+
+static const char driver_name [] = "pxa2xx_udc";
+
+static const char ep0name [] = "ep0";
+
+
+// #define USE_DMA
+// #define USE_OUT_DMA
+// #define DISABLE_TEST_MODE
+
+#ifdef CONFIG_ARCH_IXP4XX
+#undef USE_DMA
+
+/* cpu-specific register addresses are compiled in to this code */
+#ifdef CONFIG_ARCH_PXA
+#error "Can't configure both IXP and PXA"
+#endif
+
+#endif
+
+#include "pxa2xx_udc.h"
+
+
+#ifdef USE_DMA
+static int use_dma = 1;
+module_param(use_dma, bool, 0);
+MODULE_PARM_DESC (use_dma, "true to use dma");
+
+static void dma_nodesc_handler (int dmach, void *_ep, struct pt_regs *r);
+static void kick_dma(struct pxa2xx_ep *ep, struct pxa2xx_request *req);
+
+#ifdef USE_OUT_DMA
+#define DMASTR " (dma support)"
+#else
+#define DMASTR " (dma in)"
+#endif
+
+#else /* !USE_DMA */
+#define DMASTR " (pio only)"
+#undef USE_OUT_DMA
+#endif
+
+#ifdef CONFIG_USB_PXA2XX_SMALL
+#define SIZE_STR " (small)"
+#else
+#define SIZE_STR ""
+#endif
+
+#ifdef DISABLE_TEST_MODE
+/* (mode == 0) == no undocumented chip tweaks
+ * (mode & 1) == double buffer bulk IN
+ * (mode & 2) == double buffer bulk OUT
+ * ... so mode = 3 (or 7, 15, etc) does it for both
+ */
+static ushort fifo_mode = 0;
+module_param(fifo_mode, ushort, 0);
+MODULE_PARM_DESC (fifo_mode, "pxa2xx udc fifo mode");
+#endif
+
+/* ---------------------------------------------------------------------------
+ * endpoint related parts of the api to the usb controller hardware,
+ * used by gadget driver; and the inner talker-to-hardware core.
+ * ---------------------------------------------------------------------------
+ */
+
+static void pxa2xx_ep_fifo_flush (struct usb_ep *ep);
+static void nuke (struct pxa2xx_ep *, int status);
+
+static void pio_irq_enable(int bEndpointAddress)
+{
+ bEndpointAddress &= 0xf;
+ if (bEndpointAddress < 8)
+ UICR0 &= ~(1 << bEndpointAddress);
+ else {
+ bEndpointAddress -= 8;
+ UICR1 &= ~(1 << bEndpointAddress);
+ }
+}
+
+static void pio_irq_disable(int bEndpointAddress)
+{
+ bEndpointAddress &= 0xf;
+ if (bEndpointAddress < 8)
+ UICR0 |= 1 << bEndpointAddress;
+ else {
+ bEndpointAddress -= 8;
+ UICR1 |= 1 << bEndpointAddress;
+ }
+}
+
+/* The UDCCR reg contains mask and interrupt status bits,
+ * so using '|=' isn't safe as it may ack an interrupt.
+ */
+#define UDCCR_MASK_BITS (UDCCR_REM | UDCCR_SRM | UDCCR_UDE)
+
+static inline void udc_set_mask_UDCCR(int mask)
+{
+ UDCCR = (UDCCR & UDCCR_MASK_BITS) | (mask & UDCCR_MASK_BITS);
+}
+
+static inline void udc_clear_mask_UDCCR(int mask)
+{
+ UDCCR = (UDCCR & UDCCR_MASK_BITS) & ~(mask & UDCCR_MASK_BITS);
+}
+
+static inline void udc_ack_int_UDCCR(int mask)
+{
+ /* udccr contains the bits we dont want to change */
+ __u32 udccr = UDCCR & UDCCR_MASK_BITS;
+
+ UDCCR = udccr | (mask & ~UDCCR_MASK_BITS);
+}
+
+/*
+ * endpoint enable/disable
+ *
+ * we need to verify the descriptors used to enable endpoints. since pxa2xx
+ * endpoint configurations are fixed, and are pretty much always enabled,
+ * there's not a lot to manage here.
+ *
+ * because pxa2xx can't selectively initialize bulk (or interrupt) endpoints,
+ * (resetting endpoint halt and toggle), SET_INTERFACE is unusable except
+ * for a single interface (with only the default altsetting) and for gadget
+ * drivers that don't halt endpoints (not reset by set_interface). that also
+ * means that if you use ISO, you must violate the USB spec rule that all
+ * iso endpoints must be in non-default altsettings.
+ */
+static int pxa2xx_ep_enable (struct usb_ep *_ep,
+ const struct usb_endpoint_descriptor *desc)
+{
+ struct pxa2xx_ep *ep;
+ struct pxa2xx_udc *dev;
+
+ ep = container_of (_ep, struct pxa2xx_ep, ep);
+ if (!_ep || !desc || ep->desc || _ep->name == ep0name
+ || desc->bDescriptorType != USB_DT_ENDPOINT
+ || ep->bEndpointAddress != desc->bEndpointAddress
+ || ep->fifo_size < le16_to_cpu
+ (desc->wMaxPacketSize)) {
+ DMSG("%s, bad ep or descriptor\n", __FUNCTION__);
+ return -EINVAL;
+ }
+
+ /* xfer types must match, except that interrupt ~= bulk */
+ if (ep->bmAttributes != desc->bmAttributes
+ && ep->bmAttributes != USB_ENDPOINT_XFER_BULK
+ && desc->bmAttributes != USB_ENDPOINT_XFER_INT) {
+ DMSG("%s, %s type mismatch\n", __FUNCTION__, _ep->name);
+ return -EINVAL;
+ }
+
+ /* hardware _could_ do smaller, but driver doesn't */
+ if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
+ && le16_to_cpu (desc->wMaxPacketSize)
+ != BULK_FIFO_SIZE)
+ || !desc->wMaxPacketSize) {
+ DMSG("%s, bad %s maxpacket\n", __FUNCTION__, _ep->name);
+ return -ERANGE;
+ }
+
+ dev = ep->dev;
+ if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
+ DMSG("%s, bogus device state\n", __FUNCTION__);
+ return -ESHUTDOWN;
+ }
+
+ ep->desc = desc;
+ ep->dma = -1;
+ ep->stopped = 0;
+ ep->pio_irqs = ep->dma_irqs = 0;
+ ep->ep.maxpacket = le16_to_cpu (desc->wMaxPacketSize);
+
+ /* flush fifo (mostly for OUT buffers) */
+ pxa2xx_ep_fifo_flush (_ep);
+
+ /* ... reset halt state too, if we could ... */
+
+#ifdef USE_DMA
+ /* for (some) bulk and ISO endpoints, try to get a DMA channel and
+ * bind it to the endpoint. otherwise use PIO.
+ */
+ switch (ep->bmAttributes) {
+ case USB_ENDPOINT_XFER_ISOC:
+ if (le16_to_cpu(desc->wMaxPacketSize) % 32)
+ break;
+ // fall through
+ case USB_ENDPOINT_XFER_BULK:
+ if (!use_dma || !ep->reg_drcmr)
+ break;
+ ep->dma = pxa_request_dma ((char *)_ep->name,
+ (le16_to_cpu (desc->wMaxPacketSize) > 64)
+ ? DMA_PRIO_MEDIUM /* some iso */
+ : DMA_PRIO_LOW,
+ dma_nodesc_handler, ep);
+ if (ep->dma >= 0) {
+ *ep->reg_drcmr = DRCMR_MAPVLD | ep->dma;
+ DMSG("%s using dma%d\n", _ep->name, ep->dma);
+ }
+ }
+#endif
+
+ DBG(DBG_VERBOSE, "enabled %s\n", _ep->name);
+ return 0;
+}
+
+static int pxa2xx_ep_disable (struct usb_ep *_ep)
+{
+ struct pxa2xx_ep *ep;
+
+ ep = container_of (_ep, struct pxa2xx_ep, ep);
+ if (!_ep || !ep->desc) {
+ DMSG("%s, %s not enabled\n", __FUNCTION__,
+ _ep ? ep->ep.name : NULL);
+ return -EINVAL;
+ }
+ nuke (ep, -ESHUTDOWN);
+
+#ifdef USE_DMA
+ if (ep->dma >= 0) {
+ *ep->reg_drcmr = 0;
+ pxa_free_dma (ep->dma);
+ ep->dma = -1;
+ }
+#endif
+
+ /* flush fifo (mostly for IN buffers) */
+ pxa2xx_ep_fifo_flush (_ep);
+
+ ep->desc = NULL;
+ ep->stopped = 1;
+
+ DBG(DBG_VERBOSE, "%s disabled\n", _ep->name);
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* for the pxa2xx, these can just wrap kmalloc/kfree. gadget drivers
+ * must still pass correctly initialized endpoints, since other controller
+ * drivers may care about how it's currently set up (dma issues etc).
+ */
+
+/*
+ * pxa2xx_ep_alloc_request - allocate a request data structure
+ */
+static struct usb_request *
+pxa2xx_ep_alloc_request (struct usb_ep *_ep, int gfp_flags)
+{
+ struct pxa2xx_request *req;
+
+ req = kmalloc (sizeof *req, gfp_flags);
+ if (!req)
+ return NULL;
+
+ memset (req, 0, sizeof *req);
+ INIT_LIST_HEAD (&req->queue);
+ return &req->req;
+}
+
+
+/*
+ * pxa2xx_ep_free_request - deallocate a request data structure
+ */
+static void
+pxa2xx_ep_free_request (struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct pxa2xx_request *req;
+
+ req = container_of (_req, struct pxa2xx_request, req);
+ WARN_ON (!list_empty (&req->queue));
+ kfree(req);
+}
+
+
+/* PXA cache needs flushing with DMA I/O (it's dma-incoherent), but there's
+ * no device-affinity and the heap works perfectly well for i/o buffers.
+ * It wastes much less memory than dma_alloc_coherent() would, and even
+ * prevents cacheline (32 bytes wide) sharing problems.
+ */
+static void *
+pxa2xx_ep_alloc_buffer(struct usb_ep *_ep, unsigned bytes,
+ dma_addr_t *dma, int gfp_flags)
+{
+ char *retval;
+
+ retval = kmalloc (bytes, gfp_flags & ~(__GFP_DMA|__GFP_HIGHMEM));
+ if (retval)
+#ifdef USE_DMA
+ *dma = virt_to_bus (retval);
+#else
+ *dma = (dma_addr_t)~0;
+#endif
+ return retval;
+}
+
+static void
+pxa2xx_ep_free_buffer(struct usb_ep *_ep, void *buf, dma_addr_t dma,
+ unsigned bytes)
+{
+ kfree (buf);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * done - retire a request; caller blocked irqs
+ */
+static void done(struct pxa2xx_ep *ep, struct pxa2xx_request *req, int status)
+{
+ unsigned stopped = ep->stopped;
+
+ list_del_init(&req->queue);
+
+ if (likely (req->req.status == -EINPROGRESS))
+ req->req.status = status;
+ else
+ status = req->req.status;
+
+ if (status && status != -ESHUTDOWN)
+ DBG(DBG_VERBOSE, "complete %s req %p stat %d len %u/%u\n",
+ ep->ep.name, &req->req, status,
+ req->req.actual, req->req.length);
+
+ /* don't modify queue heads during completion callback */
+ ep->stopped = 1;
+ req->req.complete(&ep->ep, &req->req);
+ ep->stopped = stopped;
+}
+
+
+static inline void ep0_idle (struct pxa2xx_udc *dev)
+{
+ dev->ep0state = EP0_IDLE;
+}
+
+static int
+write_packet(volatile u32 *uddr, struct pxa2xx_request *req, unsigned max)
+{
+ u8 *buf;
+ unsigned length, count;
+
+ buf = req->req.buf + req->req.actual;
+ prefetch(buf);
+
+ /* how big will this packet be? */
+ length = min(req->req.length - req->req.actual, max);
+ req->req.actual += length;
+
+ count = length;
+ while (likely(count--))
+ *uddr = *buf++;
+
+ return length;
+}
+
+/*
+ * write to an IN endpoint fifo, as many packets as possible.
+ * irqs will use this to write the rest later.
+ * caller guarantees at least one packet buffer is ready (or a zlp).
+ */
+static int
+write_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
+{
+ unsigned max;
+
+ max = le16_to_cpu(ep->desc->wMaxPacketSize);
+ do {
+ unsigned count;
+ int is_last, is_short;
+
+ count = write_packet(ep->reg_uddr, req, max);
+
+ /* last packet is usually short (or a zlp) */
+ if (unlikely (count != max))
+ is_last = is_short = 1;
+ else {
+ if (likely(req->req.length != req->req.actual)
+ || req->req.zero)
+ is_last = 0;
+ else
+ is_last = 1;
+ /* interrupt/iso maxpacket may not fill the fifo */
+ is_short = unlikely (max < ep->fifo_size);
+ }
+
+ DBG(DBG_VERY_NOISY, "wrote %s %d bytes%s%s %d left %p\n",
+ ep->ep.name, count,
+ is_last ? "/L" : "", is_short ? "/S" : "",
+ req->req.length - req->req.actual, req);
+
+ /* let loose that packet. maybe try writing another one,
+ * double buffering might work. TSP, TPC, and TFS
+ * bit values are the same for all normal IN endpoints.
+ */
+ *ep->reg_udccs = UDCCS_BI_TPC;
+ if (is_short)
+ *ep->reg_udccs = UDCCS_BI_TSP;
+
+ /* requests complete when all IN data is in the FIFO */
+ if (is_last) {
+ done (ep, req, 0);
+ if (list_empty(&ep->queue) || unlikely(ep->dma >= 0)) {
+ pio_irq_disable (ep->bEndpointAddress);
+#ifdef USE_DMA
+ /* unaligned data and zlps couldn't use dma */
+ if (unlikely(!list_empty(&ep->queue))) {
+ req = list_entry(ep->queue.next,
+ struct pxa2xx_request, queue);
+ kick_dma(ep,req);
+ return 0;
+ }
+#endif
+ }
+ return 1;
+ }
+
+ // TODO experiment: how robust can fifo mode tweaking be?
+ // double buffering is off in the default fifo mode, which
+ // prevents TFS from being set here.
+
+ } while (*ep->reg_udccs & UDCCS_BI_TFS);
+ return 0;
+}
+
+/* caller asserts req->pending (ep0 irq status nyet cleared); starts
+ * ep0 data stage. these chips want very simple state transitions.
+ */
+static inline
+void ep0start(struct pxa2xx_udc *dev, u32 flags, const char *tag)
+{
+ UDCCS0 = flags|UDCCS0_SA|UDCCS0_OPR;
+ USIR0 = USIR0_IR0;
+ dev->req_pending = 0;
+ DBG(DBG_VERY_NOISY, "%s %s, %02x/%02x\n",
+ __FUNCTION__, tag, UDCCS0, flags);
+}
+
+static int
+write_ep0_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
+{
+ unsigned count;
+ int is_short;
+
+ count = write_packet(&UDDR0, req, EP0_FIFO_SIZE);
+ ep->dev->stats.write.bytes += count;
+
+ /* last packet "must be" short (or a zlp) */
+ is_short = (count != EP0_FIFO_SIZE);
+
+ DBG(DBG_VERY_NOISY, "ep0in %d bytes %d left %p\n", count,
+ req->req.length - req->req.actual, req);
+
+ if (unlikely (is_short)) {
+ if (ep->dev->req_pending)
+ ep0start(ep->dev, UDCCS0_IPR, "short IN");
+ else
+ UDCCS0 = UDCCS0_IPR;
+
+ count = req->req.length;
+ done (ep, req, 0);
+ ep0_idle(ep->dev);
+#if 1
+ /* This seems to get rid of lost status irqs in some cases:
+ * host responds quickly, or next request involves config
+ * change automagic, or should have been hidden, or ...
+ *
+ * FIXME get rid of all udelays possible...
+ */
+ if (count >= EP0_FIFO_SIZE) {
+ count = 100;
+ do {
+ if ((UDCCS0 & UDCCS0_OPR) != 0) {
+ /* clear OPR, generate ack */
+ UDCCS0 = UDCCS0_OPR;
+ break;
+ }
+ count--;
+ udelay(1);
+ } while (count);
+ }
+#endif
+ } else if (ep->dev->req_pending)
+ ep0start(ep->dev, 0, "IN");
+ return is_short;
+}
+
+
+/*
+ * read_fifo - unload packet(s) from the fifo we use for usb OUT
+ * transfers and put them into the request. caller should have made
+ * sure there's at least one packet ready.
+ *
+ * returns true if the request completed because of short packet or the
+ * request buffer having filled (and maybe overran till end-of-packet).
+ */
+static int
+read_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
+{
+ for (;;) {
+ u32 udccs;
+ u8 *buf;
+ unsigned bufferspace, count, is_short;
+
+ /* make sure there's a packet in the FIFO.
+ * UDCCS_{BO,IO}_RPC are all the same bit value.
+ * UDCCS_{BO,IO}_RNE are all the same bit value.
+ */
+ udccs = *ep->reg_udccs;
+ if (unlikely ((udccs & UDCCS_BO_RPC) == 0))
+ break;
+ buf = req->req.buf + req->req.actual;
+ prefetchw(buf);
+ bufferspace = req->req.length - req->req.actual;
+
+ /* read all bytes from this packet */
+ if (likely (udccs & UDCCS_BO_RNE)) {
+ count = 1 + (0x0ff & *ep->reg_ubcr);
+ req->req.actual += min (count, bufferspace);
+ } else /* zlp */
+ count = 0;
+ is_short = (count < ep->ep.maxpacket);
+ DBG(DBG_VERY_NOISY, "read %s %02x, %d bytes%s req %p %d/%d\n",
+ ep->ep.name, udccs, count,
+ is_short ? "/S" : "",
+ req, req->req.actual, req->req.length);
+ while (likely (count-- != 0)) {
+ u8 byte = (u8) *ep->reg_uddr;
+
+ if (unlikely (bufferspace == 0)) {
+ /* this happens when the driver's buffer
+ * is smaller than what the host sent.
+ * discard the extra data.
+ */
+ if (req->req.status != -EOVERFLOW)
+ DMSG("%s overflow %d\n",
+ ep->ep.name, count);
+ req->req.status = -EOVERFLOW;
+ } else {
+ *buf++ = byte;
+ bufferspace--;
+ }
+ }
+ *ep->reg_udccs = UDCCS_BO_RPC;
+ /* RPC/RSP/RNE could now reflect the other packet buffer */
+
+ /* iso is one request per packet */
+ if (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+ if (udccs & UDCCS_IO_ROF)
+ req->req.status = -EHOSTUNREACH;
+ /* more like "is_done" */
+ is_short = 1;
+ }
+
+ /* completion */
+ if (is_short || req->req.actual == req->req.length) {
+ done (ep, req, 0);
+ if (list_empty(&ep->queue))
+ pio_irq_disable (ep->bEndpointAddress);
+ return 1;
+ }
+
+ /* finished that packet. the next one may be waiting... */
+ }
+ return 0;
+}
+
+/*
+ * special ep0 version of the above. no UBCR0 or double buffering; status
+ * handshaking is magic. most device protocols don't need control-OUT.
+ * CDC vendor commands (and RNDIS), mass storage CB/CBI, and some other
+ * protocols do use them.
+ */
+static int
+read_ep0_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
+{
+ u8 *buf, byte;
+ unsigned bufferspace;
+
+ buf = req->req.buf + req->req.actual;
+ bufferspace = req->req.length - req->req.actual;
+
+ while (UDCCS0 & UDCCS0_RNE) {
+ byte = (u8) UDDR0;
+
+ if (unlikely (bufferspace == 0)) {
+ /* this happens when the driver's buffer
+ * is smaller than what the host sent.
+ * discard the extra data.
+ */
+ if (req->req.status != -EOVERFLOW)
+ DMSG("%s overflow\n", ep->ep.name);
+ req->req.status = -EOVERFLOW;
+ } else {
+ *buf++ = byte;
+ req->req.actual++;
+ bufferspace--;
+ }
+ }
+
+ UDCCS0 = UDCCS0_OPR | UDCCS0_IPR;
+
+ /* completion */
+ if (req->req.actual >= req->req.length)
+ return 1;
+
+ /* finished that packet. the next one may be waiting... */
+ return 0;
+}
+
+#ifdef USE_DMA
+
+#define MAX_IN_DMA ((DCMD_LENGTH + 1) - BULK_FIFO_SIZE)
+
+static void
+start_dma_nodesc(struct pxa2xx_ep *ep, struct pxa2xx_request *req, int is_in)
+{
+ u32 dcmd = req->req.length;
+ u32 buf = req->req.dma;
+ u32 fifo = io_v2p ((u32)ep->reg_uddr);
+
+ /* caller guarantees there's a packet or more remaining
+ * - IN may end with a short packet (TSP set separately),
+ * - OUT is always full length
+ */
+ buf += req->req.actual;
+ dcmd -= req->req.actual;
+ ep->dma_fixup = 0;
+
+ /* no-descriptor mode can be simple for bulk-in, iso-in, iso-out */
+ DCSR(ep->dma) = DCSR_NODESC;
+ if (is_in) {
+ DSADR(ep->dma) = buf;
+ DTADR(ep->dma) = fifo;
+ if (dcmd > MAX_IN_DMA)
+ dcmd = MAX_IN_DMA;
+ else
+ ep->dma_fixup = (dcmd % ep->ep.maxpacket) != 0;
+ dcmd |= DCMD_BURST32 | DCMD_WIDTH1
+ | DCMD_FLOWTRG | DCMD_INCSRCADDR;
+ } else {
+#ifdef USE_OUT_DMA
+ DSADR(ep->dma) = fifo;
+ DTADR(ep->dma) = buf;
+ if (ep->bmAttributes != USB_ENDPOINT_XFER_ISOC)
+ dcmd = ep->ep.maxpacket;
+ dcmd |= DCMD_BURST32 | DCMD_WIDTH1
+ | DCMD_FLOWSRC | DCMD_INCTRGADDR;
+#endif
+ }
+ DCMD(ep->dma) = dcmd;
+ DCSR(ep->dma) = DCSR_RUN | DCSR_NODESC
+ | (unlikely(is_in)
+ ? DCSR_STOPIRQEN /* use dma_nodesc_handler() */
+ : 0); /* use handle_ep() */
+}
+
+static void kick_dma(struct pxa2xx_ep *ep, struct pxa2xx_request *req)
+{
+ int is_in = ep->bEndpointAddress & USB_DIR_IN;
+
+ if (is_in) {
+ /* unaligned tx buffers and zlps only work with PIO */
+ if ((req->req.dma & 0x0f) != 0
+ || unlikely((req->req.length - req->req.actual)
+ == 0)) {
+ pio_irq_enable(ep->bEndpointAddress);
+ if ((*ep->reg_udccs & UDCCS_BI_TFS) != 0)
+ (void) write_fifo(ep, req);
+ } else {
+ start_dma_nodesc(ep, req, USB_DIR_IN);
+ }
+ } else {
+ if ((req->req.length - req->req.actual) < ep->ep.maxpacket) {
+ DMSG("%s short dma read...\n", ep->ep.name);
+ /* we're always set up for pio out */
+ read_fifo (ep, req);
+ } else {
+ *ep->reg_udccs = UDCCS_BO_DME
+ | (*ep->reg_udccs & UDCCS_BO_FST);
+ start_dma_nodesc(ep, req, USB_DIR_OUT);
+ }
+ }
+}
+
+static void cancel_dma(struct pxa2xx_ep *ep)
+{
+ struct pxa2xx_request *req;
+ u32 tmp;
+
+ if (DCSR(ep->dma) == 0 || list_empty(&ep->queue))
+ return;
+
+ DCSR(ep->dma) = 0;
+ while ((DCSR(ep->dma) & DCSR_STOPSTATE) == 0)
+ cpu_relax();
+
+ req = list_entry(ep->queue.next, struct pxa2xx_request, queue);
+ tmp = DCMD(ep->dma) & DCMD_LENGTH;
+ req->req.actual = req->req.length - (tmp & DCMD_LENGTH);
+
+ /* the last tx packet may be incomplete, so flush the fifo.
+ * FIXME correct req.actual if we can
+ */
+ if (ep->bEndpointAddress & USB_DIR_IN)
+ *ep->reg_udccs = UDCCS_BI_FTF;
+}
+
+/* dma channel stopped ... normal tx end (IN), or on error (IN/OUT) */
+static void dma_nodesc_handler(int dmach, void *_ep, struct pt_regs *r)
+{
+ struct pxa2xx_ep *ep = _ep;
+ struct pxa2xx_request *req;
+ u32 tmp, completed;
+
+ local_irq_disable();
+
+ req = list_entry(ep->queue.next, struct pxa2xx_request, queue);
+
+ ep->dma_irqs++;
+ ep->dev->stats.irqs++;
+ HEX_DISPLAY(ep->dev->stats.irqs);
+
+ /* ack/clear */
+ tmp = DCSR(ep->dma);
+ DCSR(ep->dma) = tmp;
+ if ((tmp & DCSR_STOPSTATE) == 0
+ || (DDADR(ep->dma) & DDADR_STOP) != 0) {
+ DBG(DBG_VERBOSE, "%s, dcsr %08x ddadr %08x\n",
+ ep->ep.name, DCSR(ep->dma), DDADR(ep->dma));
+ goto done;
+ }
+ DCSR(ep->dma) = 0; /* clear DCSR_STOPSTATE */
+
+ /* update transfer status */
+ completed = tmp & DCSR_BUSERR;
+ if (ep->bEndpointAddress & USB_DIR_IN)
+ tmp = DSADR(ep->dma);
+ else
+ tmp = DTADR(ep->dma);
+ req->req.actual = tmp - req->req.dma;
+
+ /* FIXME seems we sometimes see partial transfers... */
+
+ if (unlikely(completed != 0))
+ req->req.status = -EIO;
+ else if (req->req.actual) {
+ /* these registers have zeroes in low bits; they miscount
+ * some (end-of-transfer) short packets: tx 14 as tx 12
+ */
+ if (ep->dma_fixup)
+ req->req.actual = min(req->req.actual + 3,
+ req->req.length);
+
+ tmp = (req->req.length - req->req.actual);
+ completed = (tmp == 0);
+ if (completed && (ep->bEndpointAddress & USB_DIR_IN)) {
+
+ /* maybe validate final short packet ... */
+ if ((req->req.actual % ep->ep.maxpacket) != 0)
+ *ep->reg_udccs = UDCCS_BI_TSP/*|UDCCS_BI_TPC*/;
+
+ /* ... or zlp, using pio fallback */
+ else if (ep->bmAttributes == USB_ENDPOINT_XFER_BULK
+ && req->req.zero) {
+ DMSG("%s zlp terminate ...\n", ep->ep.name);
+ completed = 0;
+ }
+ }
+ }
+
+ if (likely(completed)) {
+ done(ep, req, 0);
+
+ /* maybe re-activate after completion */
+ if (ep->stopped || list_empty(&ep->queue))
+ goto done;
+ req = list_entry(ep->queue.next, struct pxa2xx_request, queue);
+ }
+ kick_dma(ep, req);
+done:
+ local_irq_enable();
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+static int
+pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, int gfp_flags)
+{
+ struct pxa2xx_request *req;
+ struct pxa2xx_ep *ep;
+ struct pxa2xx_udc *dev;
+ unsigned long flags;
+
+ req = container_of(_req, struct pxa2xx_request, req);
+ if (unlikely (!_req || !_req->complete || !_req->buf
+ || !list_empty(&req->queue))) {
+ DMSG("%s, bad params\n", __FUNCTION__);
+ return -EINVAL;
+ }
+
+ ep = container_of(_ep, struct pxa2xx_ep, ep);
+ if (unlikely (!_ep || (!ep->desc && ep->ep.name != ep0name))) {
+ DMSG("%s, bad ep\n", __FUNCTION__);
+ return -EINVAL;
+ }
+
+ dev = ep->dev;
+ if (unlikely (!dev->driver
+ || dev->gadget.speed == USB_SPEED_UNKNOWN)) {
+ DMSG("%s, bogus device state\n", __FUNCTION__);
+ return -ESHUTDOWN;
+ }
+
+ /* iso is always one packet per request, that's the only way
+ * we can report per-packet status. that also helps with dma.
+ */
+ if (unlikely (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC
+ && req->req.length > le16_to_cpu
+ (ep->desc->wMaxPacketSize)))
+ return -EMSGSIZE;
+
+#ifdef USE_DMA
+ // FIXME caller may already have done the dma mapping
+ if (ep->dma >= 0) {
+ _req->dma = dma_map_single(dev->dev,
+ _req->buf, _req->length,
+ ((ep->bEndpointAddress & USB_DIR_IN) != 0)
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+ }
+#endif
+
+ DBG(DBG_NOISY, "%s queue req %p, len %d buf %p\n",
+ _ep->name, _req, _req->length, _req->buf);
+
+ local_irq_save(flags);
+
+ _req->status = -EINPROGRESS;
+ _req->actual = 0;
+
+ /* kickstart this i/o queue? */
+ if (list_empty(&ep->queue) && !ep->stopped) {
+ if (ep->desc == 0 /* ep0 */) {
+ unsigned length = _req->length;
+
+ switch (dev->ep0state) {
+ case EP0_IN_DATA_PHASE:
+ dev->stats.write.ops++;
+ if (write_ep0_fifo(ep, req))
+ req = NULL;
+ break;
+
+ case EP0_OUT_DATA_PHASE:
+ dev->stats.read.ops++;
+ /* messy ... */
+ if (dev->req_config) {
+ DBG(DBG_VERBOSE, "ep0 config ack%s\n",
+ dev->has_cfr ? "" : " raced");
+ if (dev->has_cfr)
+ UDCCFR = UDCCFR_AREN|UDCCFR_ACM
+ |UDCCFR_MB1;
+ done(ep, req, 0);
+ dev->ep0state = EP0_END_XFER;
+ local_irq_restore (flags);
+ return 0;
+ }
+ if (dev->req_pending)
+ ep0start(dev, UDCCS0_IPR, "OUT");
+ if (length == 0 || ((UDCCS0 & UDCCS0_RNE) != 0
+ && read_ep0_fifo(ep, req))) {
+ ep0_idle(dev);
+ done(ep, req, 0);
+ req = NULL;
+ }
+ break;
+
+ default:
+ DMSG("ep0 i/o, odd state %d\n", dev->ep0state);
+ local_irq_restore (flags);
+ return -EL2HLT;
+ }
+#ifdef USE_DMA
+ /* either start dma or prime pio pump */
+ } else if (ep->dma >= 0) {
+ kick_dma(ep, req);
+#endif
+ /* can the FIFO can satisfy the request immediately? */
+ } else if ((ep->bEndpointAddress & USB_DIR_IN) != 0
+ && (*ep->reg_udccs & UDCCS_BI_TFS) != 0
+ && write_fifo(ep, req)) {
+ req = NULL;
+ } else if ((*ep->reg_udccs & UDCCS_BO_RFS) != 0
+ && read_fifo(ep, req)) {
+ req = NULL;
+ }
+
+ if (likely (req && ep->desc) && ep->dma < 0)
+ pio_irq_enable(ep->bEndpointAddress);
+ }
+
+ /* pio or dma irq handler advances the queue. */
+ if (likely (req != 0))
+ list_add_tail(&req->queue, &ep->queue);
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+
+/*
+ * nuke - dequeue ALL requests
+ */
+static void nuke(struct pxa2xx_ep *ep, int status)
+{
+ struct pxa2xx_request *req;
+
+ /* called with irqs blocked */
+#ifdef USE_DMA
+ if (ep->dma >= 0 && !ep->stopped)
+ cancel_dma(ep);
+#endif
+ while (!list_empty(&ep->queue)) {
+ req = list_entry(ep->queue.next,
+ struct pxa2xx_request,
+ queue);
+ done(ep, req, status);
+ }
+ if (ep->desc)
+ pio_irq_disable (ep->bEndpointAddress);
+}
+
+
+/* dequeue JUST ONE request */
+static int pxa2xx_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct pxa2xx_ep *ep;
+ struct pxa2xx_request *req;
+ unsigned long flags;
+
+ ep = container_of(_ep, struct pxa2xx_ep, ep);
+ if (!_ep || ep->ep.name == ep0name)
+ return -EINVAL;
+
+ local_irq_save(flags);
+
+ /* make sure it's actually queued on this endpoint */
+ list_for_each_entry (req, &ep->queue, queue) {
+ if (&req->req == _req)
+ break;
+ }
+ if (&req->req != _req) {
+ local_irq_restore(flags);
+ return -EINVAL;
+ }
+
+#ifdef USE_DMA
+ if (ep->dma >= 0 && ep->queue.next == &req->queue && !ep->stopped) {
+ cancel_dma(ep);
+ done(ep, req, -ECONNRESET);
+ /* restart i/o */
+ if (!list_empty(&ep->queue)) {
+ req = list_entry(ep->queue.next,
+ struct pxa2xx_request, queue);
+ kick_dma(ep, req);
+ }
+ } else
+#endif
+ done(ep, req, -ECONNRESET);
+
+ local_irq_restore(flags);
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int pxa2xx_ep_set_halt(struct usb_ep *_ep, int value)
+{
+ struct pxa2xx_ep *ep;
+ unsigned long flags;
+
+ ep = container_of(_ep, struct pxa2xx_ep, ep);
+ if (unlikely (!_ep
+ || (!ep->desc && ep->ep.name != ep0name))
+ || ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+ DMSG("%s, bad ep\n", __FUNCTION__);
+ return -EINVAL;
+ }
+ if (value == 0) {
+ /* this path (reset toggle+halt) is needed to implement
+ * SET_INTERFACE on normal hardware. but it can't be
+ * done from software on the PXA UDC, and the hardware
+ * forgets to do it as part of SET_INTERFACE automagic.
+ */
+ DMSG("only host can clear %s halt\n", _ep->name);
+ return -EROFS;
+ }
+
+ local_irq_save(flags);
+
+ if ((ep->bEndpointAddress & USB_DIR_IN) != 0
+ && ((*ep->reg_udccs & UDCCS_BI_TFS) == 0
+ || !list_empty(&ep->queue))) {
+ local_irq_restore(flags);
+ return -EAGAIN;
+ }
+
+ /* FST bit is the same for control, bulk in, bulk out, interrupt in */
+ *ep->reg_udccs = UDCCS_BI_FST|UDCCS_BI_FTF;
+
+ /* ep0 needs special care */
+ if (!ep->desc) {
+ start_watchdog(ep->dev);
+ ep->dev->req_pending = 0;
+ ep->dev->ep0state = EP0_STALL;
+
+ /* and bulk/intr endpoints like dropping stalls too */
+ } else {
+ unsigned i;
+ for (i = 0; i < 1000; i += 20) {
+ if (*ep->reg_udccs & UDCCS_BI_SST)
+ break;
+ udelay(20);
+ }
+ }
+ local_irq_restore(flags);
+
+ DBG(DBG_VERBOSE, "%s halt\n", _ep->name);
+ return 0;
+}
+
+static int pxa2xx_ep_fifo_status(struct usb_ep *_ep)
+{
+ struct pxa2xx_ep *ep;
+
+ ep = container_of(_ep, struct pxa2xx_ep, ep);
+ if (!_ep) {
+ DMSG("%s, bad ep\n", __FUNCTION__);
+ return -ENODEV;
+ }
+ /* pxa can't report unclaimed bytes from IN fifos */
+ if ((ep->bEndpointAddress & USB_DIR_IN) != 0)
+ return -EOPNOTSUPP;
+ if (ep->dev->gadget.speed == USB_SPEED_UNKNOWN
+ || (*ep->reg_udccs & UDCCS_BO_RFS) == 0)
+ return 0;
+ else
+ return (*ep->reg_ubcr & 0xfff) + 1;
+}
+
+static void pxa2xx_ep_fifo_flush(struct usb_ep *_ep)
+{
+ struct pxa2xx_ep *ep;
+
+ ep = container_of(_ep, struct pxa2xx_ep, ep);
+ if (!_ep || ep->ep.name == ep0name || !list_empty(&ep->queue)) {
+ DMSG("%s, bad ep\n", __FUNCTION__);
+ return;
+ }
+
+ /* toggle and halt bits stay unchanged */
+
+ /* for OUT, just read and discard the FIFO contents. */
+ if ((ep->bEndpointAddress & USB_DIR_IN) == 0) {
+ while (((*ep->reg_udccs) & UDCCS_BO_RNE) != 0)
+ (void) *ep->reg_uddr;
+ return;
+ }
+
+ /* most IN status is the same, but ISO can't stall */
+ *ep->reg_udccs = UDCCS_BI_TPC|UDCCS_BI_FTF|UDCCS_BI_TUR
+ | (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC)
+ ? 0 : UDCCS_BI_SST;
+}
+
+
+static struct usb_ep_ops pxa2xx_ep_ops = {
+ .enable = pxa2xx_ep_enable,
+ .disable = pxa2xx_ep_disable,
+
+ .alloc_request = pxa2xx_ep_alloc_request,
+ .free_request = pxa2xx_ep_free_request,
+
+ .alloc_buffer = pxa2xx_ep_alloc_buffer,
+ .free_buffer = pxa2xx_ep_free_buffer,
+
+ .queue = pxa2xx_ep_queue,
+ .dequeue = pxa2xx_ep_dequeue,
+
+ .set_halt = pxa2xx_ep_set_halt,
+ .fifo_status = pxa2xx_ep_fifo_status,
+ .fifo_flush = pxa2xx_ep_fifo_flush,
+};
+
+
+/* ---------------------------------------------------------------------------
+ * device-scoped parts of the api to the usb controller hardware
+ * ---------------------------------------------------------------------------
+ */
+
+static int pxa2xx_udc_get_frame(struct usb_gadget *_gadget)
+{
+ return ((UFNRH & 0x07) << 8) | (UFNRL & 0xff);
+}
+
+static int pxa2xx_udc_wakeup(struct usb_gadget *_gadget)
+{
+ /* host may not have enabled remote wakeup */
+ if ((UDCCS0 & UDCCS0_DRWF) == 0)
+ return -EHOSTUNREACH;
+ udc_set_mask_UDCCR(UDCCR_RSM);
+ return 0;
+}
+
+static void stop_activity(struct pxa2xx_udc *, struct usb_gadget_driver *);
+static void udc_enable (struct pxa2xx_udc *);
+static void udc_disable(struct pxa2xx_udc *);
+
+/* We disable the UDC -- and its 48 MHz clock -- whenever it's not
+ * in active use.
+ */
+static int pullup(struct pxa2xx_udc *udc, int is_active)
+{
+ is_active = is_active && udc->vbus && udc->pullup;
+ DMSG("%s\n", is_active ? "active" : "inactive");
+ if (is_active)
+ udc_enable(udc);
+ else {
+ if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
+ DMSG("disconnect %s\n", udc->driver
+ ? udc->driver->driver.name
+ : "(no driver)");
+ stop_activity(udc, udc->driver);
+ }
+ udc_disable(udc);
+ }
+ return 0;
+}
+
+/* VBUS reporting logically comes from a transceiver */
+static int pxa2xx_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
+{
+ struct pxa2xx_udc *udc;
+
+ udc = container_of(_gadget, struct pxa2xx_udc, gadget);
+ udc->vbus = is_active = (is_active != 0);
+ DMSG("vbus %s\n", is_active ? "supplied" : "inactive");
+ pullup(udc, is_active);
+ return 0;
+}
+
+/* drivers may have software control over D+ pullup */
+static int pxa2xx_udc_pullup(struct usb_gadget *_gadget, int is_active)
+{
+ struct pxa2xx_udc *udc;
+
+ udc = container_of(_gadget, struct pxa2xx_udc, gadget);
+
+ /* not all boards support pullup control */
+ if (!udc->mach->udc_command)
+ return -EOPNOTSUPP;
+
+ is_active = (is_active != 0);
+ udc->pullup = is_active;
+ pullup(udc, is_active);
+ return 0;
+}
+
+static const struct usb_gadget_ops pxa2xx_udc_ops = {
+ .get_frame = pxa2xx_udc_get_frame,
+ .wakeup = pxa2xx_udc_wakeup,
+ .vbus_session = pxa2xx_udc_vbus_session,
+ .pullup = pxa2xx_udc_pullup,
+
+ // .vbus_draw ... boards may consume current from VBUS, up to
+ // 100-500mA based on config. the 500uA suspend ceiling means
+ // that exclusively vbus-powered PXA designs violate USB specs.
+};
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+static const char proc_node_name [] = "driver/udc";
+
+static int
+udc_proc_read(char *page, char **start, off_t off, int count,
+ int *eof, void *_dev)
+{
+ char *buf = page;
+ struct pxa2xx_udc *dev = _dev;
+ char *next = buf;
+ unsigned size = count;
+ unsigned long flags;
+ int i, t;
+ u32 tmp;
+
+ if (off != 0)
+ return 0;
+
+ local_irq_save(flags);
+
+ /* basic device status */
+ t = scnprintf(next, size, DRIVER_DESC "\n"
+ "%s version: %s\nGadget driver: %s\nHost %s\n\n",
+ driver_name, DRIVER_VERSION SIZE_STR DMASTR,
+ dev->driver ? dev->driver->driver.name : "(none)",
+ is_usb_connected() ? "full speed" : "disconnected");
+ size -= t;
+ next += t;
+
+ /* registers for device and ep0 */
+ t = scnprintf(next, size,
+ "uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n",
+ UICR1, UICR0, USIR1, USIR0, UFNRH, UFNRL);
+ size -= t;
+ next += t;
+
+ tmp = UDCCR;
+ t = scnprintf(next, size,
+ "udccr %02X =%s%s%s%s%s%s%s%s\n", tmp,
+ (tmp & UDCCR_REM) ? " rem" : "",
+ (tmp & UDCCR_RSTIR) ? " rstir" : "",
+ (tmp & UDCCR_SRM) ? " srm" : "",
+ (tmp & UDCCR_SUSIR) ? " susir" : "",
+ (tmp & UDCCR_RESIR) ? " resir" : "",
+ (tmp & UDCCR_RSM) ? " rsm" : "",
+ (tmp & UDCCR_UDA) ? " uda" : "",
+ (tmp & UDCCR_UDE) ? " ude" : "");
+ size -= t;
+ next += t;
+
+ tmp = UDCCS0;
+ t = scnprintf(next, size,
+ "udccs0 %02X =%s%s%s%s%s%s%s%s\n", tmp,
+ (tmp & UDCCS0_SA) ? " sa" : "",
+ (tmp & UDCCS0_RNE) ? " rne" : "",
+ (tmp & UDCCS0_FST) ? " fst" : "",
+ (tmp & UDCCS0_SST) ? " sst" : "",
+ (tmp & UDCCS0_DRWF) ? " dwrf" : "",
+ (tmp & UDCCS0_FTF) ? " ftf" : "",
+ (tmp & UDCCS0_IPR) ? " ipr" : "",
+ (tmp & UDCCS0_OPR) ? " opr" : "");
+ size -= t;
+ next += t;
+
+ if (dev->has_cfr) {
+ tmp = UDCCFR;
+ t = scnprintf(next, size,
+ "udccfr %02X =%s%s\n", tmp,
+ (tmp & UDCCFR_AREN) ? " aren" : "",
+ (tmp & UDCCFR_ACM) ? " acm" : "");
+ size -= t;
+ next += t;
+ }
+
+ if (!is_usb_connected() || !dev->driver)
+ goto done;
+
+ t = scnprintf(next, size, "ep0 IN %lu/%lu, OUT %lu/%lu\nirqs %lu\n\n",
+ dev->stats.write.bytes, dev->stats.write.ops,
+ dev->stats.read.bytes, dev->stats.read.ops,
+ dev->stats.irqs);
+ size -= t;
+ next += t;
+
+ /* dump endpoint queues */
+ for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
+ struct pxa2xx_ep *ep = &dev->ep [i];
+ struct pxa2xx_request *req;
+ int t;
+
+ if (i != 0) {
+ const struct usb_endpoint_descriptor *d;
+
+ d = ep->desc;
+ if (!d)
+ continue;
+ tmp = *dev->ep [i].reg_udccs;
+ t = scnprintf(next, size,
+ "%s max %d %s udccs %02x irqs %lu/%lu\n",
+ ep->ep.name, le16_to_cpu (d->wMaxPacketSize),
+ (ep->dma >= 0) ? "dma" : "pio", tmp,
+ ep->pio_irqs, ep->dma_irqs);
+ /* TODO translate all five groups of udccs bits! */
+
+ } else /* ep0 should only have one transfer queued */
+ t = scnprintf(next, size, "ep0 max 16 pio irqs %lu\n",
+ ep->pio_irqs);
+ if (t <= 0 || t > size)
+ goto done;
+ size -= t;
+ next += t;
+
+ if (list_empty(&ep->queue)) {
+ t = scnprintf(next, size, "\t(nothing queued)\n");
+ if (t <= 0 || t > size)
+ goto done;
+ size -= t;
+ next += t;
+ continue;
+ }
+ list_for_each_entry(req, &ep->queue, queue) {
+#ifdef USE_DMA
+ if (ep->dma >= 0 && req->queue.prev == &ep->queue)
+ t = scnprintf(next, size,
+ "\treq %p len %d/%d "
+ "buf %p (dma%d dcmd %08x)\n",
+ &req->req, req->req.actual,
+ req->req.length, req->req.buf,
+ ep->dma, DCMD(ep->dma)
+ // low 13 bits == bytes-to-go
+ );
+ else
+#endif
+ t = scnprintf(next, size,
+ "\treq %p len %d/%d buf %p\n",
+ &req->req, req->req.actual,
+ req->req.length, req->req.buf);
+ if (t <= 0 || t > size)
+ goto done;
+ size -= t;
+ next += t;
+ }
+ }
+
+done:
+ local_irq_restore(flags);
+ *eof = 1;
+ return count - size;
+}
+
+#define create_proc_files() \
+ create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev)
+#define remove_proc_files() \
+ remove_proc_entry(proc_node_name, NULL)
+
+#else /* !CONFIG_USB_GADGET_DEBUG_FILES */
+
+#define create_proc_files() do {} while (0)
+#define remove_proc_files() do {} while (0)
+
+#endif /* CONFIG_USB_GADGET_DEBUG_FILES */
+
+/* "function" sysfs attribute */
+static ssize_t
+show_function (struct device *_dev, char *buf)
+{
+ struct pxa2xx_udc *dev = dev_get_drvdata (_dev);
+
+ if (!dev->driver
+ || !dev->driver->function
+ || strlen (dev->driver->function) > PAGE_SIZE)
+ return 0;
+ return scnprintf (buf, PAGE_SIZE, "%s\n", dev->driver->function);
+}
+static DEVICE_ATTR (function, S_IRUGO, show_function, NULL);
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * udc_disable - disable USB device controller
+ */
+static void udc_disable(struct pxa2xx_udc *dev)
+{
+ /* block all irqs */
+ udc_set_mask_UDCCR(UDCCR_SRM|UDCCR_REM);
+ UICR0 = UICR1 = 0xff;
+ UFNRH = UFNRH_SIM;
+
+ /* if hardware supports it, disconnect from usb */
+ make_usb_disappear();
+
+ udc_clear_mask_UDCCR(UDCCR_UDE);
+
+#ifdef CONFIG_ARCH_PXA
+ /* Disable clock for USB device */
+ pxa_set_cken(CKEN11_USB, 0);
+#endif
+
+ ep0_idle (dev);
+ dev->gadget.speed = USB_SPEED_UNKNOWN;
+ LED_CONNECTED_OFF;
+}
+
+
+/*
+ * udc_reinit - initialize software state
+ */
+static void udc_reinit(struct pxa2xx_udc *dev)
+{
+ u32 i;
+
+ /* device/ep0 records init */
+ INIT_LIST_HEAD (&dev->gadget.ep_list);
+ INIT_LIST_HEAD (&dev->gadget.ep0->ep_list);
+ dev->ep0state = EP0_IDLE;
+
+ /* basic endpoint records init */
+ for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
+ struct pxa2xx_ep *ep = &dev->ep[i];
+
+ if (i != 0)
+ list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list);
+
+ ep->desc = NULL;
+ ep->stopped = 0;
+ INIT_LIST_HEAD (&ep->queue);
+ ep->pio_irqs = ep->dma_irqs = 0;
+ }
+
+ /* the rest was statically initialized, and is read-only */
+}
+
+/* until it's enabled, this UDC should be completely invisible
+ * to any USB host.
+ */
+static void udc_enable (struct pxa2xx_udc *dev)
+{
+ udc_clear_mask_UDCCR(UDCCR_UDE);
+
+#ifdef CONFIG_ARCH_PXA
+ /* Enable clock for USB device */
+ pxa_set_cken(CKEN11_USB, 1);
+ udelay(5);
+#endif
+
+ /* try to clear these bits before we enable the udc */
+ udc_ack_int_UDCCR(UDCCR_SUSIR|/*UDCCR_RSTIR|*/UDCCR_RESIR);
+
+ ep0_idle(dev);
+ dev->gadget.speed = USB_SPEED_UNKNOWN;
+ dev->stats.irqs = 0;
+
+ /*
+ * sequence taken from chapter 12.5.10, PXA250 AppProcDevManual:
+ * - enable UDC
+ * - if RESET is already in progress, ack interrupt
+ * - unmask reset interrupt
+ */
+ udc_set_mask_UDCCR(UDCCR_UDE);
+ if (!(UDCCR & UDCCR_UDA))
+ udc_ack_int_UDCCR(UDCCR_RSTIR);
+
+ if (dev->has_cfr /* UDC_RES2 is defined */) {
+ /* pxa255 (a0+) can avoid a set_config race that could
+ * prevent gadget drivers from configuring correctly
+ */
+ UDCCFR = UDCCFR_ACM | UDCCFR_MB1;
+ } else {
+ /* "USB test mode" for pxa250 errata 40-42 (stepping a0, a1)
+ * which could result in missing packets and interrupts.
+ * supposedly one bit per endpoint, controlling whether it
+ * double buffers or not; ACM/AREN bits fit into the holes.
+ * zero bits (like USIR0_IRx) disable double buffering.
+ */
+ UDC_RES1 = 0x00;
+ UDC_RES2 = 0x00;
+ }
+
+#ifdef DISABLE_TEST_MODE
+ /* "test mode" seems to have become the default in later chip
+ * revs, preventing double buffering (and invalidating docs).
+ * this EXPERIMENT enables it for bulk endpoints by tweaking
+ * undefined/reserved register bits (that other drivers clear).
+ * Belcarra code comments noted this usage.
+ */
+ if (fifo_mode & 1) { /* IN endpoints */
+ UDC_RES1 |= USIR0_IR1|USIR0_IR6;
+ UDC_RES2 |= USIR1_IR11;
+ }
+ if (fifo_mode & 2) { /* OUT endpoints */
+ UDC_RES1 |= USIR0_IR2|USIR0_IR7;
+ UDC_RES2 |= USIR1_IR12;
+ }
+#endif
+
+ /* enable suspend/resume and reset irqs */
+ udc_clear_mask_UDCCR(UDCCR_SRM | UDCCR_REM);
+
+ /* enable ep0 irqs */
+ UICR0 &= ~UICR0_IM0;
+
+ /* if hardware supports it, pullup D+ and wait for reset */
+ let_usb_appear();
+}
+
+
+/* when a driver is successfully registered, it will receive
+ * control requests including set_configuration(), which enables
+ * non-control requests. then usb traffic follows until a
+ * disconnect is reported. then a host may connect again, or
+ * the driver might get unbound.
+ */
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+ struct pxa2xx_udc *dev = the_controller;
+ int retval;
+
+ if (!driver
+ || driver->speed != USB_SPEED_FULL
+ || !driver->bind
+ || !driver->unbind
+ || !driver->disconnect
+ || !driver->setup)
+ return -EINVAL;
+ if (!dev)
+ return -ENODEV;
+ if (dev->driver)
+ return -EBUSY;
+
+ /* first hook up the driver ... */
+ dev->driver = driver;
+ dev->gadget.dev.driver = &driver->driver;
+ dev->pullup = 1;
+
+ device_add (&dev->gadget.dev);
+ retval = driver->bind(&dev->gadget);
+ if (retval) {
+ DMSG("bind to driver %s --> error %d\n",
+ driver->driver.name, retval);
+ device_del (&dev->gadget.dev);
+
+ dev->driver = NULL;
+ dev->gadget.dev.driver = NULL;
+ return retval;
+ }
+ device_create_file(dev->dev, &dev_attr_function);
+
+ /* ... then enable host detection and ep0; and we're ready
+ * for set_configuration as well as eventual disconnect.
+ */
+ DMSG("registered gadget driver '%s'\n", driver->driver.name);
+ pullup(dev, 1);
+ dump_state(dev);
+ return 0;
+}
+EXPORT_SYMBOL(usb_gadget_register_driver);
+
+static void
+stop_activity(struct pxa2xx_udc *dev, struct usb_gadget_driver *driver)
+{
+ int i;
+
+ /* don't disconnect drivers more than once */
+ if (dev->gadget.speed == USB_SPEED_UNKNOWN)
+ driver = NULL;
+ dev->gadget.speed = USB_SPEED_UNKNOWN;
+
+ /* prevent new request submissions, kill any outstanding requests */
+ for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
+ struct pxa2xx_ep *ep = &dev->ep[i];
+
+ ep->stopped = 1;
+ nuke(ep, -ESHUTDOWN);
+ }
+ del_timer_sync(&dev->timer);
+
+ /* report disconnect; the driver is already quiesced */
+ LED_CONNECTED_OFF;
+ if (driver)
+ driver->disconnect(&dev->gadget);
+
+ /* re-init driver-visible data structures */
+ udc_reinit(dev);
+}
+
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+ struct pxa2xx_udc *dev = the_controller;
+
+ if (!dev)
+ return -ENODEV;
+ if (!driver || driver != dev->driver)
+ return -EINVAL;
+
+ local_irq_disable();
+ pullup(dev, 0);
+ stop_activity(dev, driver);
+ local_irq_enable();
+
+ driver->unbind(&dev->gadget);
+ dev->driver = NULL;
+
+ device_del (&dev->gadget.dev);
+ device_remove_file(dev->dev, &dev_attr_function);
+
+ DMSG("unregistered gadget driver '%s'\n", driver->driver.name);
+ dump_state(dev);
+ return 0;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_ARCH_LUBBOCK
+
+/* Lubbock has separate connect and disconnect irqs. More typical designs
+ * use one GPIO as the VBUS IRQ, and another to control the D+ pullup.
+ */
+
+static irqreturn_t
+lubbock_vbus_irq(int irq, void *_dev, struct pt_regs *r)
+{
+ struct pxa2xx_udc *dev = _dev;
+ int vbus;
+
+ dev->stats.irqs++;
+ HEX_DISPLAY(dev->stats.irqs);
+ switch (irq) {
+ case LUBBOCK_USB_IRQ:
+ LED_CONNECTED_ON;
+ vbus = 1;
+ disable_irq(LUBBOCK_USB_IRQ);
+ enable_irq(LUBBOCK_USB_DISC_IRQ);
+ break;
+ case LUBBOCK_USB_DISC_IRQ:
+ LED_CONNECTED_OFF;
+ vbus = 0;
+ disable_irq(LUBBOCK_USB_DISC_IRQ);
+ enable_irq(LUBBOCK_USB_IRQ);
+ break;
+ default:
+ return IRQ_NONE;
+ }
+
+ pxa2xx_udc_vbus_session(&dev->gadget, vbus);
+ return IRQ_HANDLED;
+}
+
+#endif
+
+
+/*-------------------------------------------------------------------------*/
+
+static inline void clear_ep_state (struct pxa2xx_udc *dev)
+{
+ unsigned i;
+
+ /* hardware SET_{CONFIGURATION,INTERFACE} automagic resets endpoint
+ * fifos, and pending transactions mustn't be continued in any case.
+ */
+ for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++)
+ nuke(&dev->ep[i], -ECONNABORTED);
+}
+
+static void udc_watchdog(unsigned long _dev)
+{
+ struct pxa2xx_udc *dev = (void *)_dev;
+
+ local_irq_disable();
+ if (dev->ep0state == EP0_STALL
+ && (UDCCS0 & UDCCS0_FST) == 0
+ && (UDCCS0 & UDCCS0_SST) == 0) {
+ UDCCS0 = UDCCS0_FST|UDCCS0_FTF;
+ DBG(DBG_VERBOSE, "ep0 re-stall\n");
+ start_watchdog(dev);
+ }
+ local_irq_enable();
+}
+
+static void handle_ep0 (struct pxa2xx_udc *dev)
+{
+ u32 udccs0 = UDCCS0;
+ struct pxa2xx_ep *ep = &dev->ep [0];
+ struct pxa2xx_request *req;
+ union {
+ struct usb_ctrlrequest r;
+ u8 raw [8];
+ u32 word [2];
+ } u;
+
+ if (list_empty(&ep->queue))
+ req = NULL;
+ else
+ req = list_entry(ep->queue.next, struct pxa2xx_request, queue);
+
+ /* clear stall status */
+ if (udccs0 & UDCCS0_SST) {
+ nuke(ep, -EPIPE);
+ UDCCS0 = UDCCS0_SST;
+ del_timer(&dev->timer);
+ ep0_idle(dev);
+ }
+
+ /* previous request unfinished? non-error iff back-to-back ... */
+ if ((udccs0 & UDCCS0_SA) != 0 && dev->ep0state != EP0_IDLE) {
+ nuke(ep, 0);
+ del_timer(&dev->timer);
+ ep0_idle(dev);
+ }
+
+ switch (dev->ep0state) {
+ case EP0_IDLE:
+ /* late-breaking status? */
+ udccs0 = UDCCS0;
+
+ /* start control request? */
+ if (likely((udccs0 & (UDCCS0_OPR|UDCCS0_SA|UDCCS0_RNE))
+ == (UDCCS0_OPR|UDCCS0_SA|UDCCS0_RNE))) {
+ int i;
+
+ nuke (ep, -EPROTO);
+
+ /* read SETUP packet */
+ for (i = 0; i < 8; i++) {
+ if (unlikely(!(UDCCS0 & UDCCS0_RNE))) {
+bad_setup:
+ DMSG("SETUP %d!\n", i);
+ goto stall;
+ }
+ u.raw [i] = (u8) UDDR0;
+ }
+ if (unlikely((UDCCS0 & UDCCS0_RNE) != 0))
+ goto bad_setup;
+
+got_setup:
+ DBG(DBG_VERBOSE, "SETUP %02x.%02x v%04x i%04x l%04x\n",
+ u.r.bRequestType, u.r.bRequest,
+ le16_to_cpu(u.r.wValue),
+ le16_to_cpu(u.r.wIndex),
+ le16_to_cpu(u.r.wLength));
+
+ /* cope with automagic for some standard requests. */
+ dev->req_std = (u.r.bRequestType & USB_TYPE_MASK)
+ == USB_TYPE_STANDARD;
+ dev->req_config = 0;
+ dev->req_pending = 1;
+ switch (u.r.bRequest) {
+ /* hardware restricts gadget drivers here! */
+ case USB_REQ_SET_CONFIGURATION:
+ if (u.r.bRequestType == USB_RECIP_DEVICE) {
+ /* reflect hardware's automagic
+ * up to the gadget driver.
+ */
+config_change:
+ dev->req_config = 1;
+ clear_ep_state(dev);
+ /* if !has_cfr, there's no synch
+ * else use AREN (later) not SA|OPR
+ * USIR0_IR0 acts edge sensitive
+ */
+ }
+ break;
+ /* ... and here, even more ... */
+ case USB_REQ_SET_INTERFACE:
+ if (u.r.bRequestType == USB_RECIP_INTERFACE) {
+ /* udc hardware is broken by design:
+ * - altsetting may only be zero;
+ * - hw resets all interfaces' eps;
+ * - ep reset doesn't include halt(?).
+ */
+ DMSG("broken set_interface (%d/%d)\n",
+ le16_to_cpu(u.r.wIndex),
+ le16_to_cpu(u.r.wValue));
+ goto config_change;
+ }
+ break;
+ /* hardware was supposed to hide this */
+ case USB_REQ_SET_ADDRESS:
+ if (u.r.bRequestType == USB_RECIP_DEVICE) {
+ ep0start(dev, 0, "address");
+ return;
+ }
+ break;
+ }
+
+ if (u.r.bRequestType & USB_DIR_IN)
+ dev->ep0state = EP0_IN_DATA_PHASE;
+ else
+ dev->ep0state = EP0_OUT_DATA_PHASE;
+
+ i = dev->driver->setup(&dev->gadget, &u.r);
+ if (i < 0) {
+ /* hardware automagic preventing STALL... */
+ if (dev->req_config) {
+ /* hardware sometimes neglects to tell
+ * tell us about config change events,
+ * so later ones may fail...
+ */
+ WARN("config change %02x fail %d?\n",
+ u.r.bRequest, i);
+ return;
+ /* TODO experiment: if has_cfr,
+ * hardware didn't ACK; maybe we
+ * could actually STALL!
+ */
+ }
+ DBG(DBG_VERBOSE, "protocol STALL, "
+ "%02x err %d\n", UDCCS0, i);
+stall:
+ /* the watchdog timer helps deal with cases
+ * where udc seems to clear FST wrongly, and
+ * then NAKs instead of STALLing.
+ */
+ ep0start(dev, UDCCS0_FST|UDCCS0_FTF, "stall");
+ start_watchdog(dev);
+ dev->ep0state = EP0_STALL;
+
+ /* deferred i/o == no response yet */
+ } else if (dev->req_pending) {
+ if (likely(dev->ep0state == EP0_IN_DATA_PHASE
+ || dev->req_std || u.r.wLength))
+ ep0start(dev, 0, "defer");
+ else
+ ep0start(dev, UDCCS0_IPR, "defer/IPR");
+ }
+
+ /* expect at least one data or status stage irq */
+ return;
+
+ } else if (likely((udccs0 & (UDCCS0_OPR|UDCCS0_SA))
+ == (UDCCS0_OPR|UDCCS0_SA))) {
+ unsigned i;
+
+ /* pxa210/250 erratum 131 for B0/B1 says RNE lies.
+ * still observed on a pxa255 a0.
+ */
+ DBG(DBG_VERBOSE, "e131\n");
+ nuke(ep, -EPROTO);
+
+ /* read SETUP data, but don't trust it too much */
+ for (i = 0; i < 8; i++)
+ u.raw [i] = (u8) UDDR0;
+ if ((u.r.bRequestType & USB_RECIP_MASK)
+ > USB_RECIP_OTHER)
+ goto stall;
+ if (u.word [0] == 0 && u.word [1] == 0)
+ goto stall;
+ goto got_setup;
+ } else {
+ /* some random early IRQ:
+ * - we acked FST
+ * - IPR cleared
+ * - OPR got set, without SA (likely status stage)
+ */
+ UDCCS0 = udccs0 & (UDCCS0_SA|UDCCS0_OPR);
+ }
+ break;
+ case EP0_IN_DATA_PHASE: /* GET_DESCRIPTOR etc */
+ if (udccs0 & UDCCS0_OPR) {
+ UDCCS0 = UDCCS0_OPR|UDCCS0_FTF;
+ DBG(DBG_VERBOSE, "ep0in premature status\n");
+ if (req)
+ done(ep, req, 0);
+ ep0_idle(dev);
+ } else /* irq was IPR clearing */ {
+ if (req) {
+ /* this IN packet might finish the request */
+ (void) write_ep0_fifo(ep, req);
+ } /* else IN token before response was written */
+ }
+ break;
+ case EP0_OUT_DATA_PHASE: /* SET_DESCRIPTOR etc */
+ if (udccs0 & UDCCS0_OPR) {
+ if (req) {
+ /* this OUT packet might finish the request */
+ if (read_ep0_fifo(ep, req))
+ done(ep, req, 0);
+ /* else more OUT packets expected */
+ } /* else OUT token before read was issued */
+ } else /* irq was IPR clearing */ {
+ DBG(DBG_VERBOSE, "ep0out premature status\n");
+ if (req)
+ done(ep, req, 0);
+ ep0_idle(dev);
+ }
+ break;
+ case EP0_END_XFER:
+ if (req)
+ done(ep, req, 0);
+ /* ack control-IN status (maybe in-zlp was skipped)
+ * also appears after some config change events.
+ */
+ if (udccs0 & UDCCS0_OPR)
+ UDCCS0 = UDCCS0_OPR;
+ ep0_idle(dev);
+ break;
+ case EP0_STALL:
+ UDCCS0 = UDCCS0_FST;
+ break;
+ }
+ USIR0 = USIR0_IR0;
+}
+
+static void handle_ep(struct pxa2xx_ep *ep)
+{
+ struct pxa2xx_request *req;
+ int is_in = ep->bEndpointAddress & USB_DIR_IN;
+ int completed;
+ u32 udccs, tmp;
+
+ do {
+ completed = 0;
+ if (likely (!list_empty(&ep->queue)))
+ req = list_entry(ep->queue.next,
+ struct pxa2xx_request, queue);
+ else
+ req = NULL;
+
+ // TODO check FST handling
+
+ udccs = *ep->reg_udccs;
+ if (unlikely(is_in)) { /* irq from TPC, SST, or (ISO) TUR */
+ tmp = UDCCS_BI_TUR;
+ if (likely(ep->bmAttributes == USB_ENDPOINT_XFER_BULK))
+ tmp |= UDCCS_BI_SST;
+ tmp &= udccs;
+ if (likely (tmp))
+ *ep->reg_udccs = tmp;
+ if (req && likely ((udccs & UDCCS_BI_TFS) != 0))
+ completed = write_fifo(ep, req);
+
+ } else { /* irq from RPC (or for ISO, ROF) */
+ if (likely(ep->bmAttributes == USB_ENDPOINT_XFER_BULK))
+ tmp = UDCCS_BO_SST | UDCCS_BO_DME;
+ else
+ tmp = UDCCS_IO_ROF | UDCCS_IO_DME;
+ tmp &= udccs;
+ if (likely(tmp))
+ *ep->reg_udccs = tmp;
+
+ /* fifos can hold packets, ready for reading... */
+ if (likely(req)) {
+#ifdef USE_OUT_DMA
+// TODO didn't yet debug out-dma. this approach assumes
+// the worst about short packets and RPC; it might be better.
+
+ if (likely(ep->dma >= 0)) {
+ if (!(udccs & UDCCS_BO_RSP)) {
+ *ep->reg_udccs = UDCCS_BO_RPC;
+ ep->dma_irqs++;
+ return;
+ }
+ }
+#endif
+ completed = read_fifo(ep, req);
+ } else
+ pio_irq_disable (ep->bEndpointAddress);
+ }
+ ep->pio_irqs++;
+ } while (completed);
+}
+
+/*
+ * pxa2xx_udc_irq - interrupt handler
+ *
+ * avoid delays in ep0 processing. the control handshaking isn't always
+ * under software control (pxa250c0 and the pxa255 are better), and delays
+ * could cause usb protocol errors.
+ */
+static irqreturn_t
+pxa2xx_udc_irq(int irq, void *_dev, struct pt_regs *r)
+{
+ struct pxa2xx_udc *dev = _dev;
+ int handled;
+
+ dev->stats.irqs++;
+ HEX_DISPLAY(dev->stats.irqs);
+ do {
+ u32 udccr = UDCCR;
+
+ handled = 0;
+
+ /* SUSpend Interrupt Request */
+ if (unlikely(udccr & UDCCR_SUSIR)) {
+ udc_ack_int_UDCCR(UDCCR_SUSIR);
+ handled = 1;
+ DBG(DBG_VERBOSE, "USB suspend%s\n", is_usb_connected()
+ ? "" : "+disconnect");
+
+ if (!is_usb_connected())
+ stop_activity(dev, dev->driver);
+ else if (dev->gadget.speed != USB_SPEED_UNKNOWN
+ && dev->driver
+ && dev->driver->suspend)
+ dev->driver->suspend(&dev->gadget);
+ ep0_idle (dev);
+ }
+
+ /* RESume Interrupt Request */
+ if (unlikely(udccr & UDCCR_RESIR)) {
+ udc_ack_int_UDCCR(UDCCR_RESIR);
+ handled = 1;
+ DBG(DBG_VERBOSE, "USB resume\n");
+
+ if (dev->gadget.speed != USB_SPEED_UNKNOWN
+ && dev->driver
+ && dev->driver->resume
+ && is_usb_connected())
+ dev->driver->resume(&dev->gadget);
+ }
+
+ /* ReSeT Interrupt Request - USB reset */
+ if (unlikely(udccr & UDCCR_RSTIR)) {
+ udc_ack_int_UDCCR(UDCCR_RSTIR);
+ handled = 1;
+
+ if ((UDCCR & UDCCR_UDA) == 0) {
+ DBG(DBG_VERBOSE, "USB reset start\n");
+
+ /* reset driver and endpoints,
+ * in case that's not yet done
+ */
+ stop_activity (dev, dev->driver);
+
+ } else {
+ DBG(DBG_VERBOSE, "USB reset end\n");
+ dev->gadget.speed = USB_SPEED_FULL;
+ LED_CONNECTED_ON;
+ memset(&dev->stats, 0, sizeof dev->stats);
+ /* driver and endpoints are still reset */
+ }
+
+ } else {
+ u32 usir0 = USIR0 & ~UICR0;
+ u32 usir1 = USIR1 & ~UICR1;
+ int i;
+
+ if (unlikely (!usir0 && !usir1))
+ continue;
+
+ DBG(DBG_VERY_NOISY, "irq %02x.%02x\n", usir1, usir0);
+
+ /* control traffic */
+ if (usir0 & USIR0_IR0) {
+ dev->ep[0].pio_irqs++;
+ handle_ep0(dev);
+ handled = 1;
+ }
+
+ /* endpoint data transfers */
+ for (i = 0; i < 8; i++) {
+ u32 tmp = 1 << i;
+
+ if (i && (usir0 & tmp)) {
+ handle_ep(&dev->ep[i]);
+ USIR0 |= tmp;
+ handled = 1;
+ }
+ if (usir1 & tmp) {
+ handle_ep(&dev->ep[i+8]);
+ USIR1 |= tmp;
+ handled = 1;
+ }
+ }
+ }
+
+ /* we could also ask for 1 msec SOF (SIR) interrupts */
+
+ } while (handled);
+ return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void nop_release (struct device *dev)
+{
+ DMSG("%s %s\n", __FUNCTION__, dev->bus_id);
+}
+
+/* this uses load-time allocation and initialization (instead of
+ * doing it at run-time) to save code, eliminate fault paths, and
+ * be more obviously correct.
+ */
+static struct pxa2xx_udc memory = {
+ .gadget = {
+ .ops = &pxa2xx_udc_ops,
+ .ep0 = &memory.ep[0].ep,
+ .name = driver_name,
+ .dev = {
+ .bus_id = "gadget",
+ .release = nop_release,
+ },
+ },
+
+ /* control endpoint */
+ .ep[0] = {
+ .ep = {
+ .name = ep0name,
+ .ops = &pxa2xx_ep_ops,
+ .maxpacket = EP0_FIFO_SIZE,
+ },
+ .dev = &memory,
+ .reg_udccs = &UDCCS0,
+ .reg_uddr = &UDDR0,
+ },
+
+ /* first group of endpoints */
+ .ep[1] = {
+ .ep = {
+ .name = "ep1in-bulk",
+ .ops = &pxa2xx_ep_ops,
+ .maxpacket = BULK_FIFO_SIZE,
+ },
+ .dev = &memory,
+ .fifo_size = BULK_FIFO_SIZE,
+ .bEndpointAddress = USB_DIR_IN | 1,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .reg_udccs = &UDCCS1,
+ .reg_uddr = &UDDR1,
+ drcmr (25)
+ },
+ .ep[2] = {
+ .ep = {
+ .name = "ep2out-bulk",
+ .ops = &pxa2xx_ep_ops,
+ .maxpacket = BULK_FIFO_SIZE,
+ },
+ .dev = &memory,
+ .fifo_size = BULK_FIFO_SIZE,
+ .bEndpointAddress = 2,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .reg_udccs = &UDCCS2,
+ .reg_ubcr = &UBCR2,
+ .reg_uddr = &UDDR2,
+ drcmr (26)
+ },
+#ifndef CONFIG_USB_PXA2XX_SMALL
+ .ep[3] = {
+ .ep = {
+ .name = "ep3in-iso",
+ .ops = &pxa2xx_ep_ops,
+ .maxpacket = ISO_FIFO_SIZE,
+ },
+ .dev = &memory,
+ .fifo_size = ISO_FIFO_SIZE,
+ .bEndpointAddress = USB_DIR_IN | 3,
+ .bmAttributes = USB_ENDPOINT_XFER_ISOC,
+ .reg_udccs = &UDCCS3,
+ .reg_uddr = &UDDR3,
+ drcmr (27)
+ },
+ .ep[4] = {
+ .ep = {
+ .name = "ep4out-iso",
+ .ops = &pxa2xx_ep_ops,
+ .maxpacket = ISO_FIFO_SIZE,
+ },
+ .dev = &memory,
+ .fifo_size = ISO_FIFO_SIZE,
+ .bEndpointAddress = 4,
+ .bmAttributes = USB_ENDPOINT_XFER_ISOC,
+ .reg_udccs = &UDCCS4,
+ .reg_ubcr = &UBCR4,
+ .reg_uddr = &UDDR4,
+ drcmr (28)
+ },
+ .ep[5] = {
+ .ep = {
+ .name = "ep5in-int",
+ .ops = &pxa2xx_ep_ops,
+ .maxpacket = INT_FIFO_SIZE,
+ },
+ .dev = &memory,
+ .fifo_size = INT_FIFO_SIZE,
+ .bEndpointAddress = USB_DIR_IN | 5,
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .reg_udccs = &UDCCS5,
+ .reg_uddr = &UDDR5,
+ },
+
+ /* second group of endpoints */
+ .ep[6] = {
+ .ep = {
+ .name = "ep6in-bulk",
+ .ops = &pxa2xx_ep_ops,
+ .maxpacket = BULK_FIFO_SIZE,
+ },
+ .dev = &memory,
+ .fifo_size = BULK_FIFO_SIZE,
+ .bEndpointAddress = USB_DIR_IN | 6,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .reg_udccs = &UDCCS6,
+ .reg_uddr = &UDDR6,
+ drcmr (30)
+ },
+ .ep[7] = {
+ .ep = {
+ .name = "ep7out-bulk",
+ .ops = &pxa2xx_ep_ops,
+ .maxpacket = BULK_FIFO_SIZE,
+ },
+ .dev = &memory,
+ .fifo_size = BULK_FIFO_SIZE,
+ .bEndpointAddress = 7,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .reg_udccs = &UDCCS7,
+ .reg_ubcr = &UBCR7,
+ .reg_uddr = &UDDR7,
+ drcmr (31)
+ },
+ .ep[8] = {
+ .ep = {
+ .name = "ep8in-iso",
+ .ops = &pxa2xx_ep_ops,
+ .maxpacket = ISO_FIFO_SIZE,
+ },
+ .dev = &memory,
+ .fifo_size = ISO_FIFO_SIZE,
+ .bEndpointAddress = USB_DIR_IN | 8,
+ .bmAttributes = USB_ENDPOINT_XFER_ISOC,
+ .reg_udccs = &UDCCS8,
+ .reg_uddr = &UDDR8,
+ drcmr (32)
+ },
+ .ep[9] = {
+ .ep = {
+ .name = "ep9out-iso",
+ .ops = &pxa2xx_ep_ops,
+ .maxpacket = ISO_FIFO_SIZE,
+ },
+ .dev = &memory,
+ .fifo_size = ISO_FIFO_SIZE,
+ .bEndpointAddress = 9,
+ .bmAttributes = USB_ENDPOINT_XFER_ISOC,
+ .reg_udccs = &UDCCS9,
+ .reg_ubcr = &UBCR9,
+ .reg_uddr = &UDDR9,
+ drcmr (33)
+ },
+ .ep[10] = {
+ .ep = {
+ .name = "ep10in-int",
+ .ops = &pxa2xx_ep_ops,
+ .maxpacket = INT_FIFO_SIZE,
+ },
+ .dev = &memory,
+ .fifo_size = INT_FIFO_SIZE,
+ .bEndpointAddress = USB_DIR_IN | 10,
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .reg_udccs = &UDCCS10,
+ .reg_uddr = &UDDR10,
+ },
+
+ /* third group of endpoints */
+ .ep[11] = {
+ .ep = {
+ .name = "ep11in-bulk",
+ .ops = &pxa2xx_ep_ops,
+ .maxpacket = BULK_FIFO_SIZE,
+ },
+ .dev = &memory,
+ .fifo_size = BULK_FIFO_SIZE,
+ .bEndpointAddress = USB_DIR_IN | 11,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .reg_udccs = &UDCCS11,
+ .reg_uddr = &UDDR11,
+ drcmr (35)
+ },
+ .ep[12] = {
+ .ep = {
+ .name = "ep12out-bulk",
+ .ops = &pxa2xx_ep_ops,
+ .maxpacket = BULK_FIFO_SIZE,
+ },
+ .dev = &memory,
+ .fifo_size = BULK_FIFO_SIZE,
+ .bEndpointAddress = 12,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .reg_udccs = &UDCCS12,
+ .reg_ubcr = &UBCR12,
+ .reg_uddr = &UDDR12,
+ drcmr (36)
+ },
+ .ep[13] = {
+ .ep = {
+ .name = "ep13in-iso",
+ .ops = &pxa2xx_ep_ops,
+ .maxpacket = ISO_FIFO_SIZE,
+ },
+ .dev = &memory,
+ .fifo_size = ISO_FIFO_SIZE,
+ .bEndpointAddress = USB_DIR_IN | 13,
+ .bmAttributes = USB_ENDPOINT_XFER_ISOC,
+ .reg_udccs = &UDCCS13,
+ .reg_uddr = &UDDR13,
+ drcmr (37)
+ },
+ .ep[14] = {
+ .ep = {
+ .name = "ep14out-iso",
+ .ops = &pxa2xx_ep_ops,
+ .maxpacket = ISO_FIFO_SIZE,
+ },
+ .dev = &memory,
+ .fifo_size = ISO_FIFO_SIZE,
+ .bEndpointAddress = 14,
+ .bmAttributes = USB_ENDPOINT_XFER_ISOC,
+ .reg_udccs = &UDCCS14,
+ .reg_ubcr = &UBCR14,
+ .reg_uddr = &UDDR14,
+ drcmr (38)
+ },
+ .ep[15] = {
+ .ep = {
+ .name = "ep15in-int",
+ .ops = &pxa2xx_ep_ops,
+ .maxpacket = INT_FIFO_SIZE,
+ },
+ .dev = &memory,
+ .fifo_size = INT_FIFO_SIZE,
+ .bEndpointAddress = USB_DIR_IN | 15,
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .reg_udccs = &UDCCS15,
+ .reg_uddr = &UDDR15,
+ },
+#endif /* !CONFIG_USB_PXA2XX_SMALL */
+};
+
+#define CP15R0_VENDOR_MASK 0xffffe000
+
+#if defined(CONFIG_ARCH_PXA)
+#define CP15R0_XSCALE_VALUE 0x69052000 /* intel/arm/xscale */
+
+#elif defined(CONFIG_ARCH_IXP4XX)
+#define CP15R0_XSCALE_VALUE 0x69054000 /* intel/arm/ixp4xx */
+
+#endif
+
+#define CP15R0_PROD_MASK 0x000003f0
+#define PXA25x 0x00000100 /* and PXA26x */
+#define PXA210 0x00000120
+
+#define CP15R0_REV_MASK 0x0000000f
+
+#define CP15R0_PRODREV_MASK (CP15R0_PROD_MASK | CP15R0_REV_MASK)
+
+#define PXA255_A0 0x00000106 /* or PXA260_B1 */
+#define PXA250_C0 0x00000105 /* or PXA26x_B0 */
+#define PXA250_B2 0x00000104
+#define PXA250_B1 0x00000103 /* or PXA260_A0 */
+#define PXA250_B0 0x00000102
+#define PXA250_A1 0x00000101
+#define PXA250_A0 0x00000100
+
+#define PXA210_C0 0x00000125
+#define PXA210_B2 0x00000124
+#define PXA210_B1 0x00000123
+#define PXA210_B0 0x00000122
+#define IXP425_A0 0x000001c1
+
+/*
+ * probe - binds to the platform device
+ */
+static int __init pxa2xx_udc_probe(struct device *_dev)
+{
+ struct pxa2xx_udc *dev = &memory;
+ int retval, out_dma = 1;
+ u32 chiprev;
+
+ /* insist on Intel/ARM/XScale */
+ asm("mrc%? p15, 0, %0, c0, c0" : "=r" (chiprev));
+ if ((chiprev & CP15R0_VENDOR_MASK) != CP15R0_XSCALE_VALUE) {
+ printk(KERN_ERR "%s: not XScale!\n", driver_name);
+ return -ENODEV;
+ }
+
+ /* trigger chiprev-specific logic */
+ switch (chiprev & CP15R0_PRODREV_MASK) {
+#if defined(CONFIG_ARCH_PXA)
+ case PXA255_A0:
+ dev->has_cfr = 1;
+ break;
+ case PXA250_A0:
+ case PXA250_A1:
+ /* A0/A1 "not released"; ep 13, 15 unusable */
+ /* fall through */
+ case PXA250_B2: case PXA210_B2:
+ case PXA250_B1: case PXA210_B1:
+ case PXA250_B0: case PXA210_B0:
+ out_dma = 0;
+ /* fall through */
+ case PXA250_C0: case PXA210_C0:
+ break;
+#elif defined(CONFIG_ARCH_IXP4XX)
+ case IXP425_A0:
+ out_dma = 0;
+ break;
+#endif
+ default:
+ out_dma = 0;
+ printk(KERN_ERR "%s: unrecognized processor: %08x\n",
+ driver_name, chiprev);
+ /* iop3xx, ixp4xx, ... */
+ return -ENODEV;
+ }
+
+ pr_debug("%s: IRQ %d%s%s%s\n", driver_name, IRQ_USB,
+ dev->has_cfr ? "" : " (!cfr)",
+ out_dma ? "" : " (broken dma-out)",
+ SIZE_STR DMASTR
+ );
+
+#ifdef USE_DMA
+#ifndef USE_OUT_DMA
+ out_dma = 0;
+#endif
+ /* pxa 250 erratum 130 prevents using OUT dma (fixed C0) */
+ if (!out_dma) {
+ DMSG("disabled OUT dma\n");
+ dev->ep[ 2].reg_drcmr = dev->ep[ 4].reg_drcmr = 0;
+ dev->ep[ 7].reg_drcmr = dev->ep[ 9].reg_drcmr = 0;
+ dev->ep[12].reg_drcmr = dev->ep[14].reg_drcmr = 0;
+ }
+#endif
+
+ /* other non-static parts of init */
+ dev->dev = _dev;
+ dev->mach = _dev->platform_data;
+
+ init_timer(&dev->timer);
+ dev->timer.function = udc_watchdog;
+ dev->timer.data = (unsigned long) dev;
+
+ device_initialize(&dev->gadget.dev);
+ dev->gadget.dev.parent = _dev;
+ dev->gadget.dev.dma_mask = _dev->dma_mask;
+
+ the_controller = dev;
+ dev_set_drvdata(_dev, dev);
+
+ udc_disable(dev);
+ udc_reinit(dev);
+
+ dev->vbus = is_usb_connected();
+
+ /* irq setup after old hardware state is cleaned up */
+ retval = request_irq(IRQ_USB, pxa2xx_udc_irq,
+ SA_INTERRUPT, driver_name, dev);
+ if (retval != 0) {
+ printk(KERN_ERR "%s: can't get irq %i, err %d\n",
+ driver_name, IRQ_USB, retval);
+ return -EBUSY;
+ }
+ dev->got_irq = 1;
+
+#ifdef CONFIG_ARCH_LUBBOCK
+ if (machine_is_lubbock()) {
+ retval = request_irq(LUBBOCK_USB_DISC_IRQ,
+ lubbock_vbus_irq,
+ SA_INTERRUPT | SA_SAMPLE_RANDOM,
+ driver_name, dev);
+ if (retval != 0) {
+ printk(KERN_ERR "%s: can't get irq %i, err %d\n",
+ driver_name, LUBBOCK_USB_DISC_IRQ, retval);
+lubbock_fail0:
+ free_irq(IRQ_USB, dev);
+ return -EBUSY;
+ }
+ retval = request_irq(LUBBOCK_USB_IRQ,
+ lubbock_vbus_irq,
+ SA_INTERRUPT | SA_SAMPLE_RANDOM,
+ driver_name, dev);
+ if (retval != 0) {
+ printk(KERN_ERR "%s: can't get irq %i, err %d\n",
+ driver_name, LUBBOCK_USB_IRQ, retval);
+ free_irq(LUBBOCK_USB_DISC_IRQ, dev);
+ goto lubbock_fail0;
+ }
+#ifdef DEBUG
+ /* with U-Boot (but not BLOB), hex is off by default */
+ HEX_DISPLAY(dev->stats.irqs);
+ LUB_DISC_BLNK_LED &= 0xff;
+#endif
+ }
+#endif
+ create_proc_files();
+
+ return 0;
+}
+static int __exit pxa2xx_udc_remove(struct device *_dev)
+{
+ struct pxa2xx_udc *dev = dev_get_drvdata(_dev);
+
+ udc_disable(dev);
+ remove_proc_files();
+ usb_gadget_unregister_driver(dev->driver);
+
+ if (dev->got_irq) {
+ free_irq(IRQ_USB, dev);
+ dev->got_irq = 0;
+ }
+ if (machine_is_lubbock()) {
+ free_irq(LUBBOCK_USB_DISC_IRQ, dev);
+ free_irq(LUBBOCK_USB_IRQ, dev);
+ }
+ dev_set_drvdata(_dev, NULL);
+ the_controller = NULL;
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_PM
+
+/* USB suspend (controlled by the host) and system suspend (controlled
+ * by the PXA) don't necessarily work well together. If USB is active,
+ * the 48 MHz clock is required; so the system can't enter 33 MHz idle
+ * mode, or any deeper PM saving state.
+ *
+ * For now, we punt and forcibly disconnect from the USB host when PXA
+ * enters any suspend state. While we're disconnected, we always disable
+ * the 48MHz USB clock ... allowing PXA sleep and/or 33 MHz idle states.
+ * Boards without software pullup control shouldn't use those states.
+ * VBUS IRQs should probably be ignored so that the PXA device just acts
+ * "dead" to USB hosts until system resume.
+ */
+static int pxa2xx_udc_suspend(struct device *dev, u32 state, u32 level)
+{
+ struct pxa2xx_udc *udc = dev_get_drvdata(dev);
+
+ if (level == SUSPEND_POWER_DOWN) {
+ if (!udc->mach->udc_command)
+ WARN("USB host won't detect disconnect!\n");
+ pullup(udc, 0);
+ }
+ return 0;
+}
+
+static int pxa2xx_udc_resume(struct device *dev, u32 level)
+{
+ struct pxa2xx_udc *udc = dev_get_drvdata(dev);
+
+ if (level == RESUME_POWER_ON)
+ pullup(udc, 1);
+ return 0;
+}
+
+#else
+#define pxa2xx_udc_suspend NULL
+#define pxa2xx_udc_resume NULL
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+static struct device_driver udc_driver = {
+ .name = "pxa2xx-udc",
+ .bus = &platform_bus_type,
+ .probe = pxa2xx_udc_probe,
+ .remove = __exit_p(pxa2xx_udc_remove),
+ .suspend = pxa2xx_udc_suspend,
+ .resume = pxa2xx_udc_resume,
+};
+
+static int __init udc_init(void)
+{
+ printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION);
+ return driver_register(&udc_driver);
+}
+module_init(udc_init);
+
+static void __exit udc_exit(void)
+{
+ driver_unregister(&udc_driver);
+}
+module_exit(udc_exit);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Frank Becker, Robert Schwebel, David Brownell");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa2xx_udc.h
new file mode 100644
index 00000000000..1f3a7d999da
--- /dev/null
+++ b/drivers/usb/gadget/pxa2xx_udc.h
@@ -0,0 +1,320 @@
+/*
+ * linux/drivers/usb/gadget/pxa2xx_udc.h
+ * Intel PXA2xx on-chip full speed USB device controller
+ *
+ * Copyright (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2003 David Brownell
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __LINUX_USB_GADGET_PXA2XX_H
+#define __LINUX_USB_GADGET_PXA2XX_H
+
+#include <linux/types.h>
+
+/*-------------------------------------------------------------------------*/
+
+/* pxa2xx has this (move to include/asm-arm/arch-pxa/pxa-regs.h) */
+#define UFNRH_SIR (1 << 7) /* SOF interrupt request */
+#define UFNRH_SIM (1 << 6) /* SOF interrupt mask */
+#define UFNRH_IPE14 (1 << 5) /* ISO packet error, ep14 */
+#define UFNRH_IPE9 (1 << 4) /* ISO packet error, ep9 */
+#define UFNRH_IPE4 (1 << 3) /* ISO packet error, ep4 */
+
+/* pxa255 has this (move to include/asm-arm/arch-pxa/pxa-regs.h) */
+#define UDCCFR UDC_RES2 /* UDC Control Function Register */
+#define UDCCFR_AREN (1 << 7) /* ACK response enable (now) */
+#define UDCCFR_ACM (1 << 2) /* ACK control mode (wait for AREN) */
+
+/* latest pxa255 errata define new "must be one" bits in UDCCFR */
+#define UDCCFR_MB1 (0xff & ~(UDCCFR_AREN|UDCCFR_ACM))
+
+/*-------------------------------------------------------------------------*/
+
+struct pxa2xx_udc;
+
+struct pxa2xx_ep {
+ struct usb_ep ep;
+ struct pxa2xx_udc *dev;
+
+ const struct usb_endpoint_descriptor *desc;
+ struct list_head queue;
+ unsigned long pio_irqs;
+ unsigned long dma_irqs;
+ short dma;
+
+ unsigned short fifo_size;
+ u8 bEndpointAddress;
+ u8 bmAttributes;
+
+ unsigned stopped : 1;
+ unsigned dma_fixup : 1;
+
+ /* UDCCS = UDC Control/Status for this EP
+ * UBCR = UDC Byte Count Remaining (contents of OUT fifo)
+ * UDDR = UDC Endpoint Data Register (the fifo)
+ * DRCM = DMA Request Channel Map
+ */
+ volatile u32 *reg_udccs;
+ volatile u32 *reg_ubcr;
+ volatile u32 *reg_uddr;
+#ifdef USE_DMA
+ volatile u32 *reg_drcmr;
+#define drcmr(n) .reg_drcmr = & DRCMR ## n ,
+#else
+#define drcmr(n)
+#endif
+};
+
+struct pxa2xx_request {
+ struct usb_request req;
+ struct list_head queue;
+};
+
+enum ep0_state {
+ EP0_IDLE,
+ EP0_IN_DATA_PHASE,
+ EP0_OUT_DATA_PHASE,
+ EP0_END_XFER,
+ EP0_STALL,
+};
+
+#define EP0_FIFO_SIZE ((unsigned)16)
+#define BULK_FIFO_SIZE ((unsigned)64)
+#define ISO_FIFO_SIZE ((unsigned)256)
+#define INT_FIFO_SIZE ((unsigned)8)
+
+struct udc_stats {
+ struct ep0stats {
+ unsigned long ops;
+ unsigned long bytes;
+ } read, write;
+ unsigned long irqs;
+};
+
+#ifdef CONFIG_USB_PXA2XX_SMALL
+/* when memory's tight, SMALL config saves code+data. */
+#undef USE_DMA
+#define PXA_UDC_NUM_ENDPOINTS 3
+#endif
+
+#ifndef PXA_UDC_NUM_ENDPOINTS
+#define PXA_UDC_NUM_ENDPOINTS 16
+#endif
+
+struct pxa2xx_udc {
+ struct usb_gadget gadget;
+ struct usb_gadget_driver *driver;
+
+ enum ep0_state ep0state;
+ struct udc_stats stats;
+ unsigned got_irq : 1,
+ vbus : 1,
+ pullup : 1,
+ has_cfr : 1,
+ req_pending : 1,
+ req_std : 1,
+ req_config : 1;
+
+#define start_watchdog(dev) mod_timer(&dev->timer, jiffies + (HZ/200))
+ struct timer_list timer;
+
+ struct device *dev;
+ struct pxa2xx_udc_mach_info *mach;
+ u64 dma_mask;
+ struct pxa2xx_ep ep [PXA_UDC_NUM_ENDPOINTS];
+};
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_ARCH_LUBBOCK
+#include <asm/arch/lubbock.h>
+/* lubbock can also report usb connect/disconnect irqs */
+
+#ifdef DEBUG
+#define HEX_DISPLAY(n) if (machine_is_lubbock()) { LUB_HEXLED = (n); }
+#endif
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/* LEDs are only for debug */
+#ifndef HEX_DISPLAY
+#define HEX_DISPLAY(n) do {} while(0)
+#endif
+
+#ifdef DEBUG
+#include <asm/leds.h>
+
+#define LED_CONNECTED_ON leds_event(led_green_on)
+#define LED_CONNECTED_OFF do { \
+ leds_event(led_green_off); \
+ HEX_DISPLAY(0); \
+ } while(0)
+#endif
+
+#ifndef LED_CONNECTED_ON
+#define LED_CONNECTED_ON do {} while(0)
+#define LED_CONNECTED_OFF do {} while(0)
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+static struct pxa2xx_udc *the_controller;
+
+/* one GPIO should be used to detect host disconnect */
+static inline int is_usb_connected(void)
+{
+ if (!the_controller->mach->udc_is_connected)
+ return 1;
+ return the_controller->mach->udc_is_connected();
+}
+
+/* one GPIO should force the host to see this device (or not) */
+static inline void make_usb_disappear(void)
+{
+ if (!the_controller->mach->udc_command)
+ return;
+ the_controller->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
+}
+
+static inline void let_usb_appear(void)
+{
+ if (!the_controller->mach->udc_command)
+ return;
+ the_controller->mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Debugging support vanishes in non-debug builds. DBG_NORMAL should be
+ * mostly silent during normal use/testing, with no timing side-effects.
+ */
+#define DBG_NORMAL 1 /* error paths, device state transitions */
+#define DBG_VERBOSE 2 /* add some success path trace info */
+#define DBG_NOISY 3 /* ... even more: request level */
+#define DBG_VERY_NOISY 4 /* ... even more: packet level */
+
+#ifdef DEBUG
+
+static const char *state_name[] = {
+ "EP0_IDLE",
+ "EP0_IN_DATA_PHASE", "EP0_OUT_DATA_PHASE",
+ "EP0_END_XFER", "EP0_STALL"
+};
+
+#define DMSG(stuff...) printk(KERN_DEBUG "udc: " stuff)
+
+#ifdef VERBOSE
+# define UDC_DEBUG DBG_VERBOSE
+#else
+# define UDC_DEBUG DBG_NORMAL
+#endif
+
+static void __attribute__ ((__unused__))
+dump_udccr(const char *label)
+{
+ u32 udccr = UDCCR;
+ DMSG("%s %02X =%s%s%s%s%s%s%s%s\n",
+ label, udccr,
+ (udccr & UDCCR_REM) ? " rem" : "",
+ (udccr & UDCCR_RSTIR) ? " rstir" : "",
+ (udccr & UDCCR_SRM) ? " srm" : "",
+ (udccr & UDCCR_SUSIR) ? " susir" : "",
+ (udccr & UDCCR_RESIR) ? " resir" : "",
+ (udccr & UDCCR_RSM) ? " rsm" : "",
+ (udccr & UDCCR_UDA) ? " uda" : "",
+ (udccr & UDCCR_UDE) ? " ude" : "");
+}
+
+static void __attribute__ ((__unused__))
+dump_udccs0(const char *label)
+{
+ u32 udccs0 = UDCCS0;
+
+ DMSG("%s %s %02X =%s%s%s%s%s%s%s%s\n",
+ label, state_name[the_controller->ep0state], udccs0,
+ (udccs0 & UDCCS0_SA) ? " sa" : "",
+ (udccs0 & UDCCS0_RNE) ? " rne" : "",
+ (udccs0 & UDCCS0_FST) ? " fst" : "",
+ (udccs0 & UDCCS0_SST) ? " sst" : "",
+ (udccs0 & UDCCS0_DRWF) ? " dwrf" : "",
+ (udccs0 & UDCCS0_FTF) ? " ftf" : "",
+ (udccs0 & UDCCS0_IPR) ? " ipr" : "",
+ (udccs0 & UDCCS0_OPR) ? " opr" : "");
+}
+
+static void __attribute__ ((__unused__))
+dump_state(struct pxa2xx_udc *dev)
+{
+ u32 tmp;
+ unsigned i;
+
+ DMSG("%s %s, uicr %02X.%02X, usir %02X.%02x, ufnr %02X.%02X\n",
+ is_usb_connected() ? "host " : "disconnected",
+ state_name[dev->ep0state],
+ UICR1, UICR0, USIR1, USIR0, UFNRH, UFNRL);
+ dump_udccr("udccr");
+ if (dev->has_cfr) {
+ tmp = UDCCFR;
+ DMSG("udccfr %02X =%s%s\n", tmp,
+ (tmp & UDCCFR_AREN) ? " aren" : "",
+ (tmp & UDCCFR_ACM) ? " acm" : "");
+ }
+
+ if (!dev->driver) {
+ DMSG("no gadget driver bound\n");
+ return;
+ } else
+ DMSG("ep0 driver '%s'\n", dev->driver->driver.name);
+
+ if (!is_usb_connected())
+ return;
+
+ dump_udccs0 ("udccs0");
+ DMSG("ep0 IN %lu/%lu, OUT %lu/%lu\n",
+ dev->stats.write.bytes, dev->stats.write.ops,
+ dev->stats.read.bytes, dev->stats.read.ops);
+
+ for (i = 1; i < PXA_UDC_NUM_ENDPOINTS; i++) {
+ if (dev->ep [i].desc == 0)
+ continue;
+ DMSG ("udccs%d = %02x\n", i, *dev->ep->reg_udccs);
+ }
+}
+
+#else
+
+#define DMSG(stuff...) do{}while(0)
+
+#define dump_udccr(x) do{}while(0)
+#define dump_udccs0(x) do{}while(0)
+#define dump_state(x) do{}while(0)
+
+#define UDC_DEBUG ((unsigned)0)
+
+#endif
+
+#define DBG(lvl, stuff...) do{if ((lvl) <= UDC_DEBUG) DMSG(stuff);}while(0)
+
+#define WARN(stuff...) printk(KERN_WARNING "udc: " stuff)
+#define INFO(stuff...) printk(KERN_INFO "udc: " stuff)
+
+
+#endif /* __LINUX_USB_GADGET_PXA2XX_H */
diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c
new file mode 100644
index 00000000000..6c5197850ed
--- /dev/null
+++ b/drivers/usb/gadget/rndis.c
@@ -0,0 +1,1428 @@
+/*
+ * RNDIS MSG parser
+ *
+ * Version: $Id: rndis.c,v 1.19 2004/03/25 21:33:46 robert Exp $
+ *
+ * Authors: Benedikt Spranger, Pengutronix
+ * Robert Schwebel, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This software was originally developed in conformance with
+ * Microsoft's Remote NDIS Specification License Agreement.
+ *
+ * 03/12/2004 Kai-Uwe Bloem <linux-development@auerswald.de>
+ * Fixed message length bug in init_response
+ *
+ * 03/25/2004 Kai-Uwe Bloem <linux-development@auerswald.de>
+ * Fixed rndis_rm_hdr length bug.
+ *
+ * Copyright (C) 2004 by David Brownell
+ * updates to merge with Linux 2.6, better match RNDIS spec
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/proc_fs.h>
+#include <linux/netdevice.h>
+
+#include <asm/io.h>
+#include <asm/byteorder.h>
+#include <asm/system.h>
+
+
+#undef RNDIS_PM
+#undef VERBOSE
+
+#include "rndis.h"
+
+
+/* The driver for your USB chip needs to support ep0 OUT to work with
+ * RNDIS, plus all three CDC Ethernet endpoints (interrupt not optional).
+ *
+ * Windows hosts need an INF file like Documentation/usb/linux.inf
+ * and will be happier if you provide the host_addr module parameter.
+ */
+
+#if 0
+#define DEBUG(str,args...) do { \
+ if (rndis_debug) \
+ printk(KERN_DEBUG str , ## args ); \
+ } while (0)
+static int rndis_debug = 0;
+
+module_param (rndis_debug, bool, 0);
+MODULE_PARM_DESC (rndis_debug, "enable debugging");
+
+#else
+
+#define rndis_debug 0
+#define DEBUG(str,args...) do{}while(0)
+#endif
+
+#define RNDIS_MAX_CONFIGS 1
+
+
+static rndis_params rndis_per_dev_params [RNDIS_MAX_CONFIGS];
+
+/* Driver Version */
+static const __le32 rndis_driver_version = __constant_cpu_to_le32 (1);
+
+/* Function Prototypes */
+static int rndis_init_response (int configNr, rndis_init_msg_type *buf);
+static int rndis_query_response (int configNr, rndis_query_msg_type *buf);
+static int rndis_set_response (int configNr, rndis_set_msg_type *buf);
+static int rndis_reset_response (int configNr, rndis_reset_msg_type *buf);
+static int rndis_keepalive_response (int configNr,
+ rndis_keepalive_msg_type *buf);
+
+static rndis_resp_t *rndis_add_response (int configNr, u32 length);
+
+
+/* NDIS Functions */
+static int gen_ndis_query_resp (int configNr, u32 OID, rndis_resp_t *r)
+{
+ int retval = -ENOTSUPP;
+ u32 length = 0;
+ __le32 *tmp;
+ int i, count;
+ rndis_query_cmplt_type *resp;
+
+ if (!r) return -ENOMEM;
+ resp = (rndis_query_cmplt_type *) r->buf;
+
+ if (!resp) return -ENOMEM;
+
+ switch (OID) {
+
+ /* general oids (table 4-1) */
+
+ /* mandatory */
+ case OID_GEN_SUPPORTED_LIST:
+ DEBUG ("%s: OID_GEN_SUPPORTED_LIST\n", __FUNCTION__);
+ length = sizeof (oid_supported_list);
+ count = length / sizeof (u32);
+ tmp = (__le32 *) ((u8 *)resp + 24);
+ for (i = 0; i < count; i++)
+ tmp[i] = cpu_to_le32 (oid_supported_list[i]);
+ retval = 0;
+ break;
+
+ /* mandatory */
+ case OID_GEN_HARDWARE_STATUS:
+ DEBUG("%s: OID_GEN_HARDWARE_STATUS\n", __FUNCTION__);
+ length = 4;
+ /* Bogus question!
+ * Hardware must be ready to receive high level protocols.
+ * BTW:
+ * reddite ergo quae sunt Caesaris Caesari
+ * et quae sunt Dei Deo!
+ */
+ *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0);
+ retval = 0;
+ break;
+
+ /* mandatory */
+ case OID_GEN_MEDIA_SUPPORTED:
+ DEBUG("%s: OID_GEN_MEDIA_SUPPORTED\n", __FUNCTION__);
+ length = 4;
+ *((__le32 *) resp + 6) = cpu_to_le32 (
+ rndis_per_dev_params [configNr].medium);
+ retval = 0;
+ break;
+
+ /* mandatory */
+ case OID_GEN_MEDIA_IN_USE:
+ DEBUG("%s: OID_GEN_MEDIA_IN_USE\n", __FUNCTION__);
+ length = 4;
+ /* one medium, one transport... (maybe you do it better) */
+ *((__le32 *) resp + 6) = cpu_to_le32 (
+ rndis_per_dev_params [configNr].medium);
+ retval = 0;
+ break;
+
+ /* mandatory */
+ case OID_GEN_MAXIMUM_FRAME_SIZE:
+ DEBUG("%s: OID_GEN_MAXIMUM_FRAME_SIZE\n", __FUNCTION__);
+ if (rndis_per_dev_params [configNr].dev) {
+ length = 4;
+ *((__le32 *) resp + 6) = cpu_to_le32 (
+ rndis_per_dev_params [configNr].dev->mtu);
+ retval = 0;
+ } else {
+ *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0);
+ retval = 0;
+ }
+ break;
+
+ /* mandatory */
+ case OID_GEN_LINK_SPEED:
+ DEBUG("%s: OID_GEN_LINK_SPEED\n", __FUNCTION__);
+ length = 4;
+ if (rndis_per_dev_params [configNr].media_state
+ == NDIS_MEDIA_STATE_DISCONNECTED)
+ *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0);
+ else
+ *((__le32 *) resp + 6) = cpu_to_le32 (
+ rndis_per_dev_params [configNr].speed);
+ retval = 0;
+ break;
+
+ /* mandatory */
+ case OID_GEN_TRANSMIT_BLOCK_SIZE:
+ DEBUG("%s: OID_GEN_TRANSMIT_BLOCK_SIZE\n", __FUNCTION__);
+ if (rndis_per_dev_params [configNr].dev) {
+ length = 4;
+ *((__le32 *) resp + 6) = cpu_to_le32 (
+ rndis_per_dev_params [configNr].dev->mtu);
+ retval = 0;
+ }
+ break;
+
+ /* mandatory */
+ case OID_GEN_RECEIVE_BLOCK_SIZE:
+ DEBUG("%s: OID_GEN_RECEIVE_BLOCK_SIZE\n", __FUNCTION__);
+ if (rndis_per_dev_params [configNr].dev) {
+ length = 4;
+ *((__le32 *) resp + 6) = cpu_to_le32 (
+ rndis_per_dev_params [configNr].dev->mtu);
+ retval = 0;
+ }
+ break;
+
+ /* mandatory */
+ case OID_GEN_VENDOR_ID:
+ DEBUG("%s: OID_GEN_VENDOR_ID\n", __FUNCTION__);
+ length = 4;
+ *((__le32 *) resp + 6) = cpu_to_le32 (
+ rndis_per_dev_params [configNr].vendorID);
+ retval = 0;
+ break;
+
+ /* mandatory */
+ case OID_GEN_VENDOR_DESCRIPTION:
+ DEBUG("%s: OID_GEN_VENDOR_DESCRIPTION\n", __FUNCTION__);
+ length = strlen (rndis_per_dev_params [configNr].vendorDescr);
+ memcpy ((u8 *) resp + 24,
+ rndis_per_dev_params [configNr].vendorDescr, length);
+ retval = 0;
+ break;
+
+ case OID_GEN_VENDOR_DRIVER_VERSION:
+ DEBUG("%s: OID_GEN_VENDOR_DRIVER_VERSION\n", __FUNCTION__);
+ length = 4;
+ /* Created as LE */
+ *((__le32 *) resp + 6) = rndis_driver_version;
+ retval = 0;
+ break;
+
+ /* mandatory */
+ case OID_GEN_CURRENT_PACKET_FILTER:
+ DEBUG("%s: OID_GEN_CURRENT_PACKET_FILTER\n", __FUNCTION__);
+ length = 4;
+ *((__le32 *) resp + 6) = cpu_to_le32 (
+ rndis_per_dev_params[configNr].filter);
+ retval = 0;
+ break;
+
+ /* mandatory */
+ case OID_GEN_MAXIMUM_TOTAL_SIZE:
+ DEBUG("%s: OID_GEN_MAXIMUM_TOTAL_SIZE\n", __FUNCTION__);
+ length = 4;
+ *((__le32 *) resp + 6) = __constant_cpu_to_le32(
+ RNDIS_MAX_TOTAL_SIZE);
+ retval = 0;
+ break;
+
+ /* mandatory */
+ case OID_GEN_MEDIA_CONNECT_STATUS:
+ DEBUG("%s: OID_GEN_MEDIA_CONNECT_STATUS\n", __FUNCTION__);
+ length = 4;
+ *((__le32 *) resp + 6) = cpu_to_le32 (
+ rndis_per_dev_params [configNr]
+ .media_state);
+ retval = 0;
+ break;
+
+ case OID_GEN_PHYSICAL_MEDIUM:
+ DEBUG("%s: OID_GEN_PHYSICAL_MEDIUM\n", __FUNCTION__);
+ length = 4;
+ *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0);
+ retval = 0;
+ break;
+
+ /* The RNDIS specification is incomplete/wrong. Some versions
+ * of MS-Windows expect OIDs that aren't specified there. Other
+ * versions emit undefined RNDIS messages. DOCUMENT ALL THESE!
+ */
+ case OID_GEN_MAC_OPTIONS: /* from WinME */
+ DEBUG("%s: OID_GEN_MAC_OPTIONS\n", __FUNCTION__);
+ length = 4;
+ *((__le32 *) resp + 6) = __constant_cpu_to_le32(
+ NDIS_MAC_OPTION_RECEIVE_SERIALIZED
+ | NDIS_MAC_OPTION_FULL_DUPLEX);
+ retval = 0;
+ break;
+
+ /* statistics OIDs (table 4-2) */
+
+ /* mandatory */
+ case OID_GEN_XMIT_OK:
+ DEBUG("%s: OID_GEN_XMIT_OK\n", __FUNCTION__);
+ if (rndis_per_dev_params [configNr].stats) {
+ length = 4;
+ *((__le32 *) resp + 6) = cpu_to_le32 (
+ rndis_per_dev_params [configNr].stats->tx_packets -
+ rndis_per_dev_params [configNr].stats->tx_errors -
+ rndis_per_dev_params [configNr].stats->tx_dropped);
+ retval = 0;
+ } else {
+ *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0);
+ retval = 0;
+ }
+ break;
+
+ /* mandatory */
+ case OID_GEN_RCV_OK:
+ DEBUG("%s: OID_GEN_RCV_OK\n", __FUNCTION__);
+ if (rndis_per_dev_params [configNr].stats) {
+ length = 4;
+ *((__le32 *) resp + 6) = cpu_to_le32 (
+ rndis_per_dev_params [configNr].stats->rx_packets -
+ rndis_per_dev_params [configNr].stats->rx_errors -
+ rndis_per_dev_params [configNr].stats->rx_dropped);
+ retval = 0;
+ } else {
+ *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0);
+ retval = 0;
+ }
+ break;
+
+ /* mandatory */
+ case OID_GEN_XMIT_ERROR:
+ DEBUG("%s: OID_GEN_XMIT_ERROR\n", __FUNCTION__);
+ if (rndis_per_dev_params [configNr].stats) {
+ length = 4;
+ *((__le32 *) resp + 6) = cpu_to_le32 (
+ rndis_per_dev_params [configNr]
+ .stats->tx_errors);
+ retval = 0;
+ } else {
+ *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0);
+ retval = 0;
+ }
+ break;
+
+ /* mandatory */
+ case OID_GEN_RCV_ERROR:
+ DEBUG("%s: OID_GEN_RCV_ERROR\n", __FUNCTION__);
+ if (rndis_per_dev_params [configNr].stats) {
+ *((__le32 *) resp + 6) = cpu_to_le32 (
+ rndis_per_dev_params [configNr]
+ .stats->rx_errors);
+ retval = 0;
+ } else {
+ *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0);
+ retval = 0;
+ }
+ break;
+
+ /* mandatory */
+ case OID_GEN_RCV_NO_BUFFER:
+ DEBUG("%s: OID_GEN_RCV_NO_BUFFER\n", __FUNCTION__);
+ if (rndis_per_dev_params [configNr].stats) {
+ *((__le32 *) resp + 6) = cpu_to_le32 (
+ rndis_per_dev_params [configNr]
+ .stats->rx_dropped);
+ retval = 0;
+ } else {
+ *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0);
+ retval = 0;
+ }
+ break;
+
+#ifdef RNDIS_OPTIONAL_STATS
+ case OID_GEN_DIRECTED_BYTES_XMIT:
+ DEBUG("%s: OID_GEN_DIRECTED_BYTES_XMIT\n", __FUNCTION__);
+ /*
+ * Aunt Tilly's size of shoes
+ * minus antarctica count of penguins
+ * divided by weight of Alpha Centauri
+ */
+ if (rndis_per_dev_params [configNr].stats) {
+ length = 4;
+ *((__le32 *) resp + 6) = cpu_to_le32 (
+ (rndis_per_dev_params [configNr]
+ .stats->tx_packets -
+ rndis_per_dev_params [configNr]
+ .stats->tx_errors -
+ rndis_per_dev_params [configNr]
+ .stats->tx_dropped)
+ * 123);
+ retval = 0;
+ } else {
+ *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0);
+ retval = 0;
+ }
+ break;
+
+ case OID_GEN_DIRECTED_FRAMES_XMIT:
+ DEBUG("%s: OID_GEN_DIRECTED_FRAMES_XMIT\n", __FUNCTION__);
+ /* dito */
+ if (rndis_per_dev_params [configNr].stats) {
+ length = 4;
+ *((__le32 *) resp + 6) = cpu_to_le32 (
+ (rndis_per_dev_params [configNr]
+ .stats->tx_packets -
+ rndis_per_dev_params [configNr]
+ .stats->tx_errors -
+ rndis_per_dev_params [configNr]
+ .stats->tx_dropped)
+ / 123);
+ retval = 0;
+ } else {
+ *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0);
+ retval = 0;
+ }
+ break;
+
+ case OID_GEN_MULTICAST_BYTES_XMIT:
+ DEBUG("%s: OID_GEN_MULTICAST_BYTES_XMIT\n", __FUNCTION__);
+ if (rndis_per_dev_params [configNr].stats) {
+ *((__le32 *) resp + 6) = cpu_to_le32 (
+ rndis_per_dev_params [configNr]
+ .stats->multicast*1234);
+ retval = 0;
+ } else {
+ *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0);
+ retval = 0;
+ }
+ break;
+
+ case OID_GEN_MULTICAST_FRAMES_XMIT:
+ DEBUG("%s: OID_GEN_MULTICAST_FRAMES_XMIT\n", __FUNCTION__);
+ if (rndis_per_dev_params [configNr].stats) {
+ *((__le32 *) resp + 6) = cpu_to_le32 (
+ rndis_per_dev_params [configNr]
+ .stats->multicast);
+ retval = 0;
+ } else {
+ *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0);
+ retval = 0;
+ }
+ break;
+
+ case OID_GEN_BROADCAST_BYTES_XMIT:
+ DEBUG("%s: OID_GEN_BROADCAST_BYTES_XMIT\n", __FUNCTION__);
+ if (rndis_per_dev_params [configNr].stats) {
+ *((__le32 *) resp + 6) = cpu_to_le32 (
+ rndis_per_dev_params [configNr]
+ .stats->tx_packets/42*255);
+ retval = 0;
+ } else {
+ *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0);
+ retval = 0;
+ }
+ break;
+
+ case OID_GEN_BROADCAST_FRAMES_XMIT:
+ DEBUG("%s: OID_GEN_BROADCAST_FRAMES_XMIT\n", __FUNCTION__);
+ if (rndis_per_dev_params [configNr].stats) {
+ *((__le32 *) resp + 6) = cpu_to_le32 (
+ rndis_per_dev_params [configNr]
+ .stats->tx_packets/42);
+ retval = 0;
+ } else {
+ *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0);
+ retval = 0;
+ }
+ break;
+
+ case OID_GEN_DIRECTED_BYTES_RCV:
+ DEBUG("%s: OID_GEN_DIRECTED_BYTES_RCV\n", __FUNCTION__);
+ *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0);
+ retval = 0;
+ break;
+
+ case OID_GEN_DIRECTED_FRAMES_RCV:
+ DEBUG("%s: OID_GEN_DIRECTED_FRAMES_RCV\n", __FUNCTION__);
+ *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0);
+ retval = 0;
+ break;
+
+ case OID_GEN_MULTICAST_BYTES_RCV:
+ DEBUG("%s: OID_GEN_MULTICAST_BYTES_RCV\n", __FUNCTION__);
+ if (rndis_per_dev_params [configNr].stats) {
+ *((__le32 *) resp + 6) = cpu_to_le32 (
+ rndis_per_dev_params [configNr]
+ .stats->multicast * 1111);
+ retval = 0;
+ } else {
+ *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0);
+ retval = 0;
+ }
+ break;
+
+ case OID_GEN_MULTICAST_FRAMES_RCV:
+ DEBUG("%s: OID_GEN_MULTICAST_FRAMES_RCV\n", __FUNCTION__);
+ if (rndis_per_dev_params [configNr].stats) {
+ *((__le32 *) resp + 6) = cpu_to_le32 (
+ rndis_per_dev_params [configNr]
+ .stats->multicast);
+ retval = 0;
+ } else {
+ *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0);
+ retval = 0;
+ }
+ break;
+
+ case OID_GEN_BROADCAST_BYTES_RCV:
+ DEBUG("%s: OID_GEN_BROADCAST_BYTES_RCV\n", __FUNCTION__);
+ if (rndis_per_dev_params [configNr].stats) {
+ *((__le32 *) resp + 6) = cpu_to_le32 (
+ rndis_per_dev_params [configNr]
+ .stats->rx_packets/42*255);
+ retval = 0;
+ } else {
+ *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0);
+ retval = 0;
+ }
+ break;
+
+ case OID_GEN_BROADCAST_FRAMES_RCV:
+ DEBUG("%s: OID_GEN_BROADCAST_FRAMES_RCV\n", __FUNCTION__);
+ if (rndis_per_dev_params [configNr].stats) {
+ *((__le32 *) resp + 6) = cpu_to_le32 (
+ rndis_per_dev_params [configNr]
+ .stats->rx_packets/42);
+ retval = 0;
+ } else {
+ *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0);
+ retval = 0;
+ }
+ break;
+
+ case OID_GEN_RCV_CRC_ERROR:
+ DEBUG("%s: OID_GEN_RCV_CRC_ERROR\n", __FUNCTION__);
+ if (rndis_per_dev_params [configNr].stats) {
+ *((__le32 *) resp + 6) = cpu_to_le32 (
+ rndis_per_dev_params [configNr]
+ .stats->rx_crc_errors);
+ retval = 0;
+ } else {
+ *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0);
+ retval = 0;
+ }
+ break;
+
+ case OID_GEN_TRANSMIT_QUEUE_LENGTH:
+ DEBUG("%s: OID_GEN_TRANSMIT_QUEUE_LENGTH\n", __FUNCTION__);
+ *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0);
+ retval = 0;
+ break;
+#endif /* RNDIS_OPTIONAL_STATS */
+
+ /* ieee802.3 OIDs (table 4-3) */
+
+ /* mandatory */
+ case OID_802_3_PERMANENT_ADDRESS:
+ DEBUG("%s: OID_802_3_PERMANENT_ADDRESS\n", __FUNCTION__);
+ if (rndis_per_dev_params [configNr].dev) {
+ length = ETH_ALEN;
+ memcpy ((u8 *) resp + 24,
+ rndis_per_dev_params [configNr].host_mac,
+ length);
+ retval = 0;
+ } else {
+ *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0);
+ retval = 0;
+ }
+ break;
+
+ /* mandatory */
+ case OID_802_3_CURRENT_ADDRESS:
+ DEBUG("%s: OID_802_3_CURRENT_ADDRESS\n", __FUNCTION__);
+ if (rndis_per_dev_params [configNr].dev) {
+ length = ETH_ALEN;
+ memcpy ((u8 *) resp + 24,
+ rndis_per_dev_params [configNr].host_mac,
+ length);
+ retval = 0;
+ }
+ break;
+
+ /* mandatory */
+ case OID_802_3_MULTICAST_LIST:
+ DEBUG("%s: OID_802_3_MULTICAST_LIST\n", __FUNCTION__);
+ length = 4;
+ /* Multicast base address only */
+ *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0xE0000000);
+ retval = 0;
+ break;
+
+ /* mandatory */
+ case OID_802_3_MAXIMUM_LIST_SIZE:
+ DEBUG("%s: OID_802_3_MAXIMUM_LIST_SIZE\n", __FUNCTION__);
+ length = 4;
+ /* Multicast base address only */
+ *((__le32 *) resp + 6) = __constant_cpu_to_le32 (1);
+ retval = 0;
+ break;
+
+ case OID_802_3_MAC_OPTIONS:
+ DEBUG("%s: OID_802_3_MAC_OPTIONS\n", __FUNCTION__);
+ break;
+
+ /* ieee802.3 statistics OIDs (table 4-4) */
+
+ /* mandatory */
+ case OID_802_3_RCV_ERROR_ALIGNMENT:
+ DEBUG("%s: OID_802_3_RCV_ERROR_ALIGNMENT\n", __FUNCTION__);
+ if (rndis_per_dev_params [configNr].stats)
+ {
+ length = 4;
+ *((__le32 *) resp + 6) = cpu_to_le32 (
+ rndis_per_dev_params [configNr]
+ .stats->rx_frame_errors);
+ retval = 0;
+ }
+ break;
+
+ /* mandatory */
+ case OID_802_3_XMIT_ONE_COLLISION:
+ DEBUG("%s: OID_802_3_XMIT_ONE_COLLISION\n", __FUNCTION__);
+ length = 4;
+ *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0);
+ retval = 0;
+ break;
+
+ /* mandatory */
+ case OID_802_3_XMIT_MORE_COLLISIONS:
+ DEBUG("%s: OID_802_3_XMIT_MORE_COLLISIONS\n", __FUNCTION__);
+ length = 4;
+ *((__le32 *) resp + 6) = __constant_cpu_to_le32 (0);
+ retval = 0;
+ break;
+
+#ifdef RNDIS_OPTIONAL_STATS
+ case OID_802_3_XMIT_DEFERRED:
+ DEBUG("%s: OID_802_3_XMIT_DEFERRED\n", __FUNCTION__);
+ /* TODO */
+ break;
+
+ case OID_802_3_XMIT_MAX_COLLISIONS:
+ DEBUG("%s: OID_802_3_XMIT_MAX_COLLISIONS\n", __FUNCTION__);
+ /* TODO */
+ break;
+
+ case OID_802_3_RCV_OVERRUN:
+ DEBUG("%s: OID_802_3_RCV_OVERRUN\n", __FUNCTION__);
+ /* TODO */
+ break;
+
+ case OID_802_3_XMIT_UNDERRUN:
+ DEBUG("%s: OID_802_3_XMIT_UNDERRUN\n", __FUNCTION__);
+ /* TODO */
+ break;
+
+ case OID_802_3_XMIT_HEARTBEAT_FAILURE:
+ DEBUG("%s: OID_802_3_XMIT_HEARTBEAT_FAILURE\n", __FUNCTION__);
+ /* TODO */
+ break;
+
+ case OID_802_3_XMIT_TIMES_CRS_LOST:
+ DEBUG("%s: OID_802_3_XMIT_TIMES_CRS_LOST\n", __FUNCTION__);
+ /* TODO */
+ break;
+
+ case OID_802_3_XMIT_LATE_COLLISIONS:
+ DEBUG("%s: OID_802_3_XMIT_LATE_COLLISIONS\n", __FUNCTION__);
+ /* TODO */
+ break;
+#endif /* RNDIS_OPTIONAL_STATS */
+
+#ifdef RNDIS_PM
+ /* power management OIDs (table 4-5) */
+ case OID_PNP_CAPABILITIES:
+ DEBUG("%s: OID_PNP_CAPABILITIES\n", __FUNCTION__);
+
+ /* just PM, and remote wakeup on link status change
+ * (not magic packet or pattern match)
+ */
+ length = sizeof (struct NDIS_PNP_CAPABILITIES);
+ memset (resp, 0, length);
+ {
+ struct NDIS_PNP_CAPABILITIES *caps = (void *) resp;
+
+ caps->Flags = NDIS_DEVICE_WAKE_UP_ENABLE;
+ caps->WakeUpCapabilities.MinLinkChangeWakeUp
+ = NdisDeviceStateD3;
+
+ /* FIXME then use usb_gadget_wakeup(), and
+ * set USB_CONFIG_ATT_WAKEUP in config desc
+ */
+ }
+ retval = 0;
+ break;
+ case OID_PNP_QUERY_POWER:
+ DEBUG("%s: OID_PNP_QUERY_POWER\n", __FUNCTION__);
+ /* sure, handle any power state that maps to USB suspend */
+ retval = 0;
+ break;
+#endif
+
+ default:
+ printk (KERN_WARNING "%s: query unknown OID 0x%08X\n",
+ __FUNCTION__, OID);
+ }
+
+ resp->InformationBufferOffset = __constant_cpu_to_le32 (16);
+ resp->InformationBufferLength = cpu_to_le32 (length);
+ resp->MessageLength = cpu_to_le32 (24 + length);
+ r->length = 24 + length;
+ return retval;
+}
+
+static int gen_ndis_set_resp (u8 configNr, u32 OID, u8 *buf, u32 buf_len,
+ rndis_resp_t *r)
+{
+ rndis_set_cmplt_type *resp;
+ int i, retval = -ENOTSUPP;
+ struct rndis_params *params;
+
+ if (!r)
+ return -ENOMEM;
+ resp = (rndis_set_cmplt_type *) r->buf;
+ if (!resp)
+ return -ENOMEM;
+
+ DEBUG("set OID %08x value, len %d:\n", OID, buf_len);
+ for (i = 0; i < buf_len; i += 16) {
+ DEBUG ("%03d: "
+ " %02x %02x %02x %02x"
+ " %02x %02x %02x %02x"
+ " %02x %02x %02x %02x"
+ " %02x %02x %02x %02x"
+ "\n",
+ i,
+ buf[i], buf [i+1],
+ buf[i+2], buf[i+3],
+ buf[i+4], buf [i+5],
+ buf[i+6], buf[i+7],
+ buf[i+8], buf [i+9],
+ buf[i+10], buf[i+11],
+ buf[i+12], buf [i+13],
+ buf[i+14], buf[i+15]);
+ }
+
+ switch (OID) {
+ case OID_GEN_CURRENT_PACKET_FILTER:
+ params = &rndis_per_dev_params [configNr];
+ retval = 0;
+
+ /* FIXME use these NDIS_PACKET_TYPE_* bitflags to
+ * filter packets in hard_start_xmit()
+ * NDIS_PACKET_TYPE_x == USB_CDC_PACKET_TYPE_x for x in:
+ * PROMISCUOUS, DIRECTED,
+ * MULTICAST, ALL_MULTICAST, BROADCAST
+ */
+ params->filter = le32_to_cpup((__le32 *)buf);
+ DEBUG("%s: OID_GEN_CURRENT_PACKET_FILTER %08x\n",
+ __FUNCTION__, params->filter);
+
+ /* this call has a significant side effect: it's
+ * what makes the packet flow start and stop, like
+ * activating the CDC Ethernet altsetting.
+ */
+ if (params->filter) {
+ params->state = RNDIS_DATA_INITIALIZED;
+ netif_carrier_on(params->dev);
+ if (netif_running(params->dev))
+ netif_wake_queue (params->dev);
+ } else {
+ params->state = RNDIS_INITIALIZED;
+ netif_carrier_off (params->dev);
+ netif_stop_queue (params->dev);
+ }
+ break;
+
+ case OID_802_3_MULTICAST_LIST:
+ /* I think we can ignore this */
+ DEBUG("%s: OID_802_3_MULTICAST_LIST\n", __FUNCTION__);
+ retval = 0;
+ break;
+#if 0
+ case OID_GEN_RNDIS_CONFIG_PARAMETER:
+ {
+ struct rndis_config_parameter *param;
+ param = (struct rndis_config_parameter *) buf;
+ DEBUG("%s: OID_GEN_RNDIS_CONFIG_PARAMETER '%*s'\n",
+ __FUNCTION__,
+ min(cpu_to_le32(param->ParameterNameLength),80),
+ buf + param->ParameterNameOffset);
+ retval = 0;
+ }
+ break;
+#endif
+
+#ifdef RNDIS_PM
+ case OID_PNP_SET_POWER:
+ DEBUG ("OID_PNP_SET_POWER\n");
+ /* sure, handle any power state that maps to USB suspend */
+ retval = 0;
+ break;
+
+ case OID_PNP_ENABLE_WAKE_UP:
+ /* always-connected ... */
+ DEBUG ("OID_PNP_ENABLE_WAKE_UP\n");
+ retval = 0;
+ break;
+
+ // no PM resume patterns supported (specified where?)
+ // so OID_PNP_{ADD,REMOVE}_WAKE_UP_PATTERN always fails
+#endif
+
+ default:
+ printk (KERN_WARNING "%s: set unknown OID 0x%08X, size %d\n",
+ __FUNCTION__, OID, buf_len);
+ }
+
+ return retval;
+}
+
+/*
+ * Response Functions
+ */
+
+static int rndis_init_response (int configNr, rndis_init_msg_type *buf)
+{
+ rndis_init_cmplt_type *resp;
+ rndis_resp_t *r;
+
+ if (!rndis_per_dev_params [configNr].dev) return -ENOTSUPP;
+
+ r = rndis_add_response (configNr, sizeof (rndis_init_cmplt_type));
+
+ if (!r) return -ENOMEM;
+
+ resp = (rndis_init_cmplt_type *) r->buf;
+
+ if (!resp) return -ENOMEM;
+
+ resp->MessageType = __constant_cpu_to_le32 (
+ REMOTE_NDIS_INITIALIZE_CMPLT);
+ resp->MessageLength = __constant_cpu_to_le32 (52);
+ resp->RequestID = buf->RequestID; /* Still LE in msg buffer */
+ resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_SUCCESS);
+ resp->MajorVersion = __constant_cpu_to_le32 (RNDIS_MAJOR_VERSION);
+ resp->MinorVersion = __constant_cpu_to_le32 (RNDIS_MINOR_VERSION);
+ resp->DeviceFlags = __constant_cpu_to_le32 (RNDIS_DF_CONNECTIONLESS);
+ resp->Medium = __constant_cpu_to_le32 (RNDIS_MEDIUM_802_3);
+ resp->MaxPacketsPerTransfer = __constant_cpu_to_le32 (1);
+ resp->MaxTransferSize = cpu_to_le32 (
+ rndis_per_dev_params [configNr].dev->mtu
+ + sizeof (struct ethhdr)
+ + sizeof (struct rndis_packet_msg_type)
+ + 22);
+ resp->PacketAlignmentFactor = __constant_cpu_to_le32 (0);
+ resp->AFListOffset = __constant_cpu_to_le32 (0);
+ resp->AFListSize = __constant_cpu_to_le32 (0);
+
+ if (rndis_per_dev_params [configNr].ack)
+ rndis_per_dev_params [configNr].ack (
+ rndis_per_dev_params [configNr].dev);
+
+ return 0;
+}
+
+static int rndis_query_response (int configNr, rndis_query_msg_type *buf)
+{
+ rndis_query_cmplt_type *resp;
+ rndis_resp_t *r;
+
+ // DEBUG("%s: OID = %08X\n", __FUNCTION__, cpu_to_le32(buf->OID));
+ if (!rndis_per_dev_params [configNr].dev) return -ENOTSUPP;
+
+ /*
+ * we need more memory:
+ * oid_supported_list is the largest answer
+ */
+ r = rndis_add_response (configNr, sizeof (oid_supported_list));
+
+ if (!r) return -ENOMEM;
+ resp = (rndis_query_cmplt_type *) r->buf;
+
+ if (!resp) return -ENOMEM;
+
+ resp->MessageType = __constant_cpu_to_le32 (REMOTE_NDIS_QUERY_CMPLT);
+ resp->MessageLength = __constant_cpu_to_le32 (24);
+ resp->RequestID = buf->RequestID; /* Still LE in msg buffer */
+
+ if (gen_ndis_query_resp (configNr, le32_to_cpu (buf->OID), r)) {
+ /* OID not supported */
+ resp->Status = __constant_cpu_to_le32 (
+ RNDIS_STATUS_NOT_SUPPORTED);
+ resp->InformationBufferLength = __constant_cpu_to_le32 (0);
+ resp->InformationBufferOffset = __constant_cpu_to_le32 (0);
+ } else
+ resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_SUCCESS);
+
+ if (rndis_per_dev_params [configNr].ack)
+ rndis_per_dev_params [configNr].ack (
+ rndis_per_dev_params [configNr].dev);
+ return 0;
+}
+
+static int rndis_set_response (int configNr, rndis_set_msg_type *buf)
+{
+ u32 BufLength, BufOffset;
+ rndis_set_cmplt_type *resp;
+ rndis_resp_t *r;
+
+ r = rndis_add_response (configNr, sizeof (rndis_set_cmplt_type));
+
+ if (!r) return -ENOMEM;
+ resp = (rndis_set_cmplt_type *) r->buf;
+ if (!resp) return -ENOMEM;
+
+ BufLength = le32_to_cpu (buf->InformationBufferLength);
+ BufOffset = le32_to_cpu (buf->InformationBufferOffset);
+
+#ifdef VERBOSE
+ DEBUG("%s: Length: %d\n", __FUNCTION__, BufLength);
+ DEBUG("%s: Offset: %d\n", __FUNCTION__, BufOffset);
+ DEBUG("%s: InfoBuffer: ", __FUNCTION__);
+
+ for (i = 0; i < BufLength; i++) {
+ DEBUG ("%02x ", *(((u8 *) buf) + i + 8 + BufOffset));
+ }
+
+ DEBUG ("\n");
+#endif
+
+ resp->MessageType = __constant_cpu_to_le32 (REMOTE_NDIS_SET_CMPLT);
+ resp->MessageLength = __constant_cpu_to_le32 (16);
+ resp->RequestID = buf->RequestID; /* Still LE in msg buffer */
+ if (gen_ndis_set_resp (configNr, le32_to_cpu (buf->OID),
+ ((u8 *) buf) + 8 + BufOffset, BufLength, r))
+ resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_NOT_SUPPORTED);
+ else resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_SUCCESS);
+
+ if (rndis_per_dev_params [configNr].ack)
+ rndis_per_dev_params [configNr].ack (
+ rndis_per_dev_params [configNr].dev);
+
+ return 0;
+}
+
+static int rndis_reset_response (int configNr, rndis_reset_msg_type *buf)
+{
+ rndis_reset_cmplt_type *resp;
+ rndis_resp_t *r;
+
+ r = rndis_add_response (configNr, sizeof (rndis_reset_cmplt_type));
+
+ if (!r) return -ENOMEM;
+ resp = (rndis_reset_cmplt_type *) r->buf;
+ if (!resp) return -ENOMEM;
+
+ resp->MessageType = __constant_cpu_to_le32 (REMOTE_NDIS_RESET_CMPLT);
+ resp->MessageLength = __constant_cpu_to_le32 (16);
+ resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_SUCCESS);
+ /* resent information */
+ resp->AddressingReset = __constant_cpu_to_le32 (1);
+
+ if (rndis_per_dev_params [configNr].ack)
+ rndis_per_dev_params [configNr].ack (
+ rndis_per_dev_params [configNr].dev);
+
+ return 0;
+}
+
+static int rndis_keepalive_response (int configNr,
+ rndis_keepalive_msg_type *buf)
+{
+ rndis_keepalive_cmplt_type *resp;
+ rndis_resp_t *r;
+
+ /* host "should" check only in RNDIS_DATA_INITIALIZED state */
+
+ r = rndis_add_response (configNr, sizeof (rndis_keepalive_cmplt_type));
+ resp = (rndis_keepalive_cmplt_type *) r->buf;
+ if (!resp) return -ENOMEM;
+
+ resp->MessageType = __constant_cpu_to_le32 (
+ REMOTE_NDIS_KEEPALIVE_CMPLT);
+ resp->MessageLength = __constant_cpu_to_le32 (16);
+ resp->RequestID = buf->RequestID; /* Still LE in msg buffer */
+ resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_SUCCESS);
+
+ if (rndis_per_dev_params [configNr].ack)
+ rndis_per_dev_params [configNr].ack (
+ rndis_per_dev_params [configNr].dev);
+
+ return 0;
+}
+
+
+/*
+ * Device to Host Comunication
+ */
+static int rndis_indicate_status_msg (int configNr, u32 status)
+{
+ rndis_indicate_status_msg_type *resp;
+ rndis_resp_t *r;
+
+ if (rndis_per_dev_params [configNr].state == RNDIS_UNINITIALIZED)
+ return -ENOTSUPP;
+
+ r = rndis_add_response (configNr,
+ sizeof (rndis_indicate_status_msg_type));
+ if (!r) return -ENOMEM;
+
+ resp = (rndis_indicate_status_msg_type *) r->buf;
+ if (!resp) return -ENOMEM;
+
+ resp->MessageType = __constant_cpu_to_le32 (
+ REMOTE_NDIS_INDICATE_STATUS_MSG);
+ resp->MessageLength = __constant_cpu_to_le32 (20);
+ resp->Status = cpu_to_le32 (status);
+ resp->StatusBufferLength = __constant_cpu_to_le32 (0);
+ resp->StatusBufferOffset = __constant_cpu_to_le32 (0);
+
+ if (rndis_per_dev_params [configNr].ack)
+ rndis_per_dev_params [configNr].ack (
+ rndis_per_dev_params [configNr].dev);
+ return 0;
+}
+
+int rndis_signal_connect (int configNr)
+{
+ rndis_per_dev_params [configNr].media_state
+ = NDIS_MEDIA_STATE_CONNECTED;
+ return rndis_indicate_status_msg (configNr,
+ RNDIS_STATUS_MEDIA_CONNECT);
+}
+
+int rndis_signal_disconnect (int configNr)
+{
+ rndis_per_dev_params [configNr].media_state
+ = NDIS_MEDIA_STATE_DISCONNECTED;
+ return rndis_indicate_status_msg (configNr,
+ RNDIS_STATUS_MEDIA_DISCONNECT);
+}
+
+void rndis_set_host_mac (int configNr, const u8 *addr)
+{
+ rndis_per_dev_params [configNr].host_mac = addr;
+}
+
+/*
+ * Message Parser
+ */
+int rndis_msg_parser (u8 configNr, u8 *buf)
+{
+ u32 MsgType, MsgLength;
+ __le32 *tmp;
+ struct rndis_params *params;
+
+ if (!buf)
+ return -ENOMEM;
+
+ tmp = (__le32 *) buf;
+ MsgType = le32_to_cpup(tmp++);
+ MsgLength = le32_to_cpup(tmp++);
+
+ if (configNr >= RNDIS_MAX_CONFIGS)
+ return -ENOTSUPP;
+ params = &rndis_per_dev_params [configNr];
+
+ /* For USB: responses may take up to 10 seconds */
+ switch (MsgType)
+ {
+ case REMOTE_NDIS_INITIALIZE_MSG:
+ DEBUG("%s: REMOTE_NDIS_INITIALIZE_MSG\n",
+ __FUNCTION__ );
+ params->state = RNDIS_INITIALIZED;
+ return rndis_init_response (configNr,
+ (rndis_init_msg_type *) buf);
+
+ case REMOTE_NDIS_HALT_MSG:
+ DEBUG("%s: REMOTE_NDIS_HALT_MSG\n",
+ __FUNCTION__ );
+ params->state = RNDIS_UNINITIALIZED;
+ if (params->dev) {
+ netif_carrier_off (params->dev);
+ netif_stop_queue (params->dev);
+ }
+ return 0;
+
+ case REMOTE_NDIS_QUERY_MSG:
+ return rndis_query_response (configNr,
+ (rndis_query_msg_type *) buf);
+
+ case REMOTE_NDIS_SET_MSG:
+ return rndis_set_response (configNr,
+ (rndis_set_msg_type *) buf);
+
+ case REMOTE_NDIS_RESET_MSG:
+ DEBUG("%s: REMOTE_NDIS_RESET_MSG\n",
+ __FUNCTION__ );
+ return rndis_reset_response (configNr,
+ (rndis_reset_msg_type *) buf);
+
+ case REMOTE_NDIS_KEEPALIVE_MSG:
+ /* For USB: host does this every 5 seconds */
+#ifdef VERBOSE
+ DEBUG("%s: REMOTE_NDIS_KEEPALIVE_MSG\n",
+ __FUNCTION__ );
+#endif
+ return rndis_keepalive_response (configNr,
+ (rndis_keepalive_msg_type *)
+ buf);
+
+ default:
+ /* At least Windows XP emits some undefined RNDIS messages.
+ * In one case those messages seemed to relate to the host
+ * suspending itself.
+ */
+ printk (KERN_WARNING
+ "%s: unknown RNDIS message 0x%08X len %d\n",
+ __FUNCTION__ , MsgType, MsgLength);
+ {
+ unsigned i;
+ for (i = 0; i < MsgLength; i += 16) {
+ DEBUG ("%03d: "
+ " %02x %02x %02x %02x"
+ " %02x %02x %02x %02x"
+ " %02x %02x %02x %02x"
+ " %02x %02x %02x %02x"
+ "\n",
+ i,
+ buf[i], buf [i+1],
+ buf[i+2], buf[i+3],
+ buf[i+4], buf [i+5],
+ buf[i+6], buf[i+7],
+ buf[i+8], buf [i+9],
+ buf[i+10], buf[i+11],
+ buf[i+12], buf [i+13],
+ buf[i+14], buf[i+15]);
+ }
+ }
+ break;
+ }
+
+ return -ENOTSUPP;
+}
+
+int rndis_register (int (* rndis_control_ack) (struct net_device *))
+{
+ u8 i;
+
+ for (i = 0; i < RNDIS_MAX_CONFIGS; i++) {
+ if (!rndis_per_dev_params [i].used) {
+ rndis_per_dev_params [i].used = 1;
+ rndis_per_dev_params [i].ack = rndis_control_ack;
+ DEBUG("%s: configNr = %d\n", __FUNCTION__, i);
+ return i;
+ }
+ }
+ DEBUG("failed\n");
+
+ return -1;
+}
+
+void rndis_deregister (int configNr)
+{
+ DEBUG("%s: \n", __FUNCTION__ );
+
+ if (configNr >= RNDIS_MAX_CONFIGS) return;
+ rndis_per_dev_params [configNr].used = 0;
+
+ return;
+}
+
+int rndis_set_param_dev (u8 configNr, struct net_device *dev,
+ struct net_device_stats *stats)
+{
+ DEBUG("%s:\n", __FUNCTION__ );
+ if (!dev || !stats) return -1;
+ if (configNr >= RNDIS_MAX_CONFIGS) return -1;
+
+ rndis_per_dev_params [configNr].dev = dev;
+ rndis_per_dev_params [configNr].stats = stats;
+
+ return 0;
+}
+
+int rndis_set_param_vendor (u8 configNr, u32 vendorID, const char *vendorDescr)
+{
+ DEBUG("%s:\n", __FUNCTION__ );
+ if (!vendorDescr) return -1;
+ if (configNr >= RNDIS_MAX_CONFIGS) return -1;
+
+ rndis_per_dev_params [configNr].vendorID = vendorID;
+ rndis_per_dev_params [configNr].vendorDescr = vendorDescr;
+
+ return 0;
+}
+
+int rndis_set_param_medium (u8 configNr, u32 medium, u32 speed)
+{
+ DEBUG("%s:\n", __FUNCTION__ );
+ if (configNr >= RNDIS_MAX_CONFIGS) return -1;
+
+ rndis_per_dev_params [configNr].medium = medium;
+ rndis_per_dev_params [configNr].speed = speed;
+
+ return 0;
+}
+
+void rndis_add_hdr (struct sk_buff *skb)
+{
+ struct rndis_packet_msg_type *header;
+
+ if (!skb)
+ return;
+ header = (void *) skb_push (skb, sizeof *header);
+ memset (header, 0, sizeof *header);
+ header->MessageType = __constant_cpu_to_le32 (1);
+ header->MessageLength = cpu_to_le32(skb->len);
+ header->DataOffset = __constant_cpu_to_le32 (36);
+ header->OOBDataOffset = cpu_to_le32(skb->len - 44);
+}
+
+void rndis_free_response (int configNr, u8 *buf)
+{
+ rndis_resp_t *r;
+ struct list_head *act, *tmp;
+
+ list_for_each_safe (act, tmp,
+ &(rndis_per_dev_params [configNr].resp_queue))
+ {
+ r = list_entry (act, rndis_resp_t, list);
+ if (r && r->buf == buf) {
+ list_del (&r->list);
+ kfree (r);
+ }
+ }
+}
+
+u8 *rndis_get_next_response (int configNr, u32 *length)
+{
+ rndis_resp_t *r;
+ struct list_head *act, *tmp;
+
+ if (!length) return NULL;
+
+ list_for_each_safe (act, tmp,
+ &(rndis_per_dev_params [configNr].resp_queue))
+ {
+ r = list_entry (act, rndis_resp_t, list);
+ if (!r->send) {
+ r->send = 1;
+ *length = r->length;
+ return r->buf;
+ }
+ }
+
+ return NULL;
+}
+
+static rndis_resp_t *rndis_add_response (int configNr, u32 length)
+{
+ rndis_resp_t *r;
+
+ r = kmalloc (sizeof (rndis_resp_t) + length, GFP_ATOMIC);
+ if (!r) return NULL;
+
+ r->buf = (u8 *) (r + 1);
+ r->length = length;
+ r->send = 0;
+
+ list_add_tail (&r->list,
+ &(rndis_per_dev_params [configNr].resp_queue));
+ return r;
+}
+
+int rndis_rm_hdr (u8 *buf, u32 *length)
+{
+ u32 i, messageLen, dataOffset;
+ __le32 *tmp;
+
+ tmp = (__le32 *) buf;
+
+ if (!buf || !length) return -1;
+ if (le32_to_cpup(tmp++) != 1) return -1;
+
+ messageLen = le32_to_cpup(tmp++);
+ dataOffset = le32_to_cpup(tmp++) + 8;
+
+ if (messageLen < dataOffset || messageLen > *length) return -1;
+
+ for (i = dataOffset; i < messageLen; i++)
+ buf [i - dataOffset] = buf [i];
+
+ *length = messageLen - dataOffset;
+
+ return 0;
+}
+
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+static int rndis_proc_read (char *page, char **start, off_t off, int count, int *eof,
+ void *data)
+{
+ char *out = page;
+ int len;
+ rndis_params *param = (rndis_params *) data;
+
+ out += snprintf (out, count,
+ "Config Nr. %d\n"
+ "used : %s\n"
+ "state : %s\n"
+ "medium : 0x%08X\n"
+ "speed : %d\n"
+ "cable : %s\n"
+ "vendor ID : 0x%08X\n"
+ "vendor : %s\n",
+ param->confignr, (param->used) ? "y" : "n",
+ ({ char *s = "?";
+ switch (param->state) {
+ case RNDIS_UNINITIALIZED:
+ s = "RNDIS_UNINITIALIZED"; break;
+ case RNDIS_INITIALIZED:
+ s = "RNDIS_INITIALIZED"; break;
+ case RNDIS_DATA_INITIALIZED:
+ s = "RNDIS_DATA_INITIALIZED"; break;
+ }; s; }),
+ param->medium,
+ (param->media_state) ? 0 : param->speed*100,
+ (param->media_state) ? "disconnected" : "connected",
+ param->vendorID, param->vendorDescr);
+
+ len = out - page;
+ len -= off;
+
+ if (len < count) {
+ *eof = 1;
+ if (len <= 0)
+ return 0;
+ } else
+ len = count;
+
+ *start = page + off;
+ return len;
+}
+
+static int rndis_proc_write (struct file *file, const char __user *buffer,
+ unsigned long count, void *data)
+{
+ rndis_params *p = data;
+ u32 speed = 0;
+ int i, fl_speed = 0;
+
+ for (i = 0; i < count; i++) {
+ char c;
+ if (get_user(c, buffer))
+ return -EFAULT;
+ switch (c) {
+ case '0':
+ case '1':
+ case '2':
+ case '3':
+ case '4':
+ case '5':
+ case '6':
+ case '7':
+ case '8':
+ case '9':
+ fl_speed = 1;
+ speed = speed*10 + c - '0';
+ break;
+ case 'C':
+ case 'c':
+ rndis_signal_connect (p->confignr);
+ break;
+ case 'D':
+ case 'd':
+ rndis_signal_disconnect(p->confignr);
+ break;
+ default:
+ if (fl_speed) p->speed = speed;
+ else DEBUG ("%c is not valid\n", c);
+ break;
+ }
+
+ buffer++;
+ }
+
+ return count;
+}
+
+#define NAME_TEMPLATE "driver/rndis-%03d"
+
+static struct proc_dir_entry *rndis_connect_state [RNDIS_MAX_CONFIGS];
+
+#endif /* CONFIG_USB_GADGET_DEBUG_FILES */
+
+
+int __init rndis_init (void)
+{
+ u8 i;
+
+ for (i = 0; i < RNDIS_MAX_CONFIGS; i++) {
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+ char name [20];
+
+ sprintf (name, NAME_TEMPLATE, i);
+ if (!(rndis_connect_state [i]
+ = create_proc_entry (name, 0660, NULL)))
+ {
+ DEBUG ("%s :remove entries", __FUNCTION__);
+ while (i) {
+ sprintf (name, NAME_TEMPLATE, --i);
+ remove_proc_entry (name, NULL);
+ }
+ DEBUG ("\n");
+ return -EIO;
+ }
+
+ rndis_connect_state [i]->nlink = 1;
+ rndis_connect_state [i]->write_proc = rndis_proc_write;
+ rndis_connect_state [i]->read_proc = rndis_proc_read;
+ rndis_connect_state [i]->data = (void *)
+ (rndis_per_dev_params + i);
+#endif
+ rndis_per_dev_params [i].confignr = i;
+ rndis_per_dev_params [i].used = 0;
+ rndis_per_dev_params [i].state = RNDIS_UNINITIALIZED;
+ rndis_per_dev_params [i].media_state
+ = NDIS_MEDIA_STATE_DISCONNECTED;
+ INIT_LIST_HEAD (&(rndis_per_dev_params [i].resp_queue));
+ }
+
+ return 0;
+}
+
+void rndis_exit (void)
+{
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+ u8 i;
+ char name [20];
+
+ for (i = 0; i < RNDIS_MAX_CONFIGS; i++) {
+ sprintf (name, NAME_TEMPLATE, i);
+ remove_proc_entry (name, NULL);
+ }
+#endif
+}
+
diff --git a/drivers/usb/gadget/rndis.h b/drivers/usb/gadget/rndis.h
new file mode 100644
index 00000000000..822501852c5
--- /dev/null
+++ b/drivers/usb/gadget/rndis.h
@@ -0,0 +1,348 @@
+/*
+ * RNDIS Definitions for Remote NDIS
+ *
+ * Version: $Id: rndis.h,v 1.15 2004/03/25 21:33:46 robert Exp $
+ *
+ * Authors: Benedikt Spranger, Pengutronix
+ * Robert Schwebel, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This software was originally developed in conformance with
+ * Microsoft's Remote NDIS Specification License Agreement.
+ */
+
+#ifndef _LINUX_RNDIS_H
+#define _LINUX_RNDIS_H
+
+#include "ndis.h"
+
+#define RNDIS_MAXIMUM_FRAME_SIZE 1518
+#define RNDIS_MAX_TOTAL_SIZE 1558
+
+/* Remote NDIS Versions */
+#define RNDIS_MAJOR_VERSION 1
+#define RNDIS_MINOR_VERSION 0
+
+/* Status Values */
+#define RNDIS_STATUS_SUCCESS 0x00000000U /* Success */
+#define RNDIS_STATUS_FAILURE 0xC0000001U /* Unspecified error */
+#define RNDIS_STATUS_INVALID_DATA 0xC0010015U /* Invalid data */
+#define RNDIS_STATUS_NOT_SUPPORTED 0xC00000BBU /* Unsupported request */
+#define RNDIS_STATUS_MEDIA_CONNECT 0x4001000BU /* Device connected */
+#define RNDIS_STATUS_MEDIA_DISCONNECT 0x4001000CU /* Device disconnected */
+/* For all not specified status messages:
+ * RNDIS_STATUS_Xxx -> NDIS_STATUS_Xxx
+ */
+
+/* Message Set for Connectionless (802.3) Devices */
+#define REMOTE_NDIS_INITIALIZE_MSG 0x00000002U /* Initialize device */
+#define REMOTE_NDIS_HALT_MSG 0x00000003U
+#define REMOTE_NDIS_QUERY_MSG 0x00000004U
+#define REMOTE_NDIS_SET_MSG 0x00000005U
+#define REMOTE_NDIS_RESET_MSG 0x00000006U
+#define REMOTE_NDIS_INDICATE_STATUS_MSG 0x00000007U
+#define REMOTE_NDIS_KEEPALIVE_MSG 0x00000008U
+
+/* Message completion */
+#define REMOTE_NDIS_INITIALIZE_CMPLT 0x80000002U
+#define REMOTE_NDIS_QUERY_CMPLT 0x80000004U
+#define REMOTE_NDIS_SET_CMPLT 0x80000005U
+#define REMOTE_NDIS_RESET_CMPLT 0x80000006U
+#define REMOTE_NDIS_KEEPALIVE_CMPLT 0x80000008U
+
+/* Device Flags */
+#define RNDIS_DF_CONNECTIONLESS 0x00000001U
+#define RNDIS_DF_CONNECTION_ORIENTED 0x00000002U
+
+#define RNDIS_MEDIUM_802_3 0x00000000U
+
+/* from drivers/net/sk98lin/h/skgepnmi.h */
+#define OID_PNP_CAPABILITIES 0xFD010100
+#define OID_PNP_SET_POWER 0xFD010101
+#define OID_PNP_QUERY_POWER 0xFD010102
+#define OID_PNP_ADD_WAKE_UP_PATTERN 0xFD010103
+#define OID_PNP_REMOVE_WAKE_UP_PATTERN 0xFD010104
+#define OID_PNP_ENABLE_WAKE_UP 0xFD010106
+
+
+/* supported OIDs */
+static const u32 oid_supported_list [] =
+{
+ /* the general stuff */
+ OID_GEN_SUPPORTED_LIST,
+ OID_GEN_HARDWARE_STATUS,
+ OID_GEN_MEDIA_SUPPORTED,
+ OID_GEN_MEDIA_IN_USE,
+ OID_GEN_MAXIMUM_FRAME_SIZE,
+ OID_GEN_LINK_SPEED,
+ OID_GEN_TRANSMIT_BLOCK_SIZE,
+ OID_GEN_RECEIVE_BLOCK_SIZE,
+ OID_GEN_VENDOR_ID,
+ OID_GEN_VENDOR_DESCRIPTION,
+ OID_GEN_VENDOR_DRIVER_VERSION,
+ OID_GEN_CURRENT_PACKET_FILTER,
+ OID_GEN_MAXIMUM_TOTAL_SIZE,
+ OID_GEN_MEDIA_CONNECT_STATUS,
+ OID_GEN_PHYSICAL_MEDIUM,
+#if 0
+ OID_GEN_RNDIS_CONFIG_PARAMETER,
+#endif
+
+ /* the statistical stuff */
+ OID_GEN_XMIT_OK,
+ OID_GEN_RCV_OK,
+ OID_GEN_XMIT_ERROR,
+ OID_GEN_RCV_ERROR,
+ OID_GEN_RCV_NO_BUFFER,
+#ifdef RNDIS_OPTIONAL_STATS
+ OID_GEN_DIRECTED_BYTES_XMIT,
+ OID_GEN_DIRECTED_FRAMES_XMIT,
+ OID_GEN_MULTICAST_BYTES_XMIT,
+ OID_GEN_MULTICAST_FRAMES_XMIT,
+ OID_GEN_BROADCAST_BYTES_XMIT,
+ OID_GEN_BROADCAST_FRAMES_XMIT,
+ OID_GEN_DIRECTED_BYTES_RCV,
+ OID_GEN_DIRECTED_FRAMES_RCV,
+ OID_GEN_MULTICAST_BYTES_RCV,
+ OID_GEN_MULTICAST_FRAMES_RCV,
+ OID_GEN_BROADCAST_BYTES_RCV,
+ OID_GEN_BROADCAST_FRAMES_RCV,
+ OID_GEN_RCV_CRC_ERROR,
+ OID_GEN_TRANSMIT_QUEUE_LENGTH,
+#endif /* RNDIS_OPTIONAL_STATS */
+
+ /* mandatory 802.3 */
+ /* the general stuff */
+ OID_802_3_PERMANENT_ADDRESS,
+ OID_802_3_CURRENT_ADDRESS,
+ OID_802_3_MULTICAST_LIST,
+ OID_802_3_MAC_OPTIONS,
+ OID_802_3_MAXIMUM_LIST_SIZE,
+
+ /* the statistical stuff */
+ OID_802_3_RCV_ERROR_ALIGNMENT,
+ OID_802_3_XMIT_ONE_COLLISION,
+ OID_802_3_XMIT_MORE_COLLISIONS,
+#ifdef RNDIS_OPTIONAL_STATS
+ OID_802_3_XMIT_DEFERRED,
+ OID_802_3_XMIT_MAX_COLLISIONS,
+ OID_802_3_RCV_OVERRUN,
+ OID_802_3_XMIT_UNDERRUN,
+ OID_802_3_XMIT_HEARTBEAT_FAILURE,
+ OID_802_3_XMIT_TIMES_CRS_LOST,
+ OID_802_3_XMIT_LATE_COLLISIONS,
+#endif /* RNDIS_OPTIONAL_STATS */
+
+#ifdef RNDIS_PM
+ /* PM and wakeup are mandatory for USB: */
+
+ /* power management */
+ OID_PNP_CAPABILITIES,
+ OID_PNP_QUERY_POWER,
+ OID_PNP_SET_POWER,
+
+ /* wake up host */
+ OID_PNP_ENABLE_WAKE_UP,
+ OID_PNP_ADD_WAKE_UP_PATTERN,
+ OID_PNP_REMOVE_WAKE_UP_PATTERN,
+#endif
+};
+
+
+typedef struct rndis_init_msg_type
+{
+ __le32 MessageType;
+ __le32 MessageLength;
+ __le32 RequestID;
+ __le32 MajorVersion;
+ __le32 MinorVersion;
+ __le32 MaxTransferSize;
+} rndis_init_msg_type;
+
+typedef struct rndis_init_cmplt_type
+{
+ __le32 MessageType;
+ __le32 MessageLength;
+ __le32 RequestID;
+ __le32 Status;
+ __le32 MajorVersion;
+ __le32 MinorVersion;
+ __le32 DeviceFlags;
+ __le32 Medium;
+ __le32 MaxPacketsPerTransfer;
+ __le32 MaxTransferSize;
+ __le32 PacketAlignmentFactor;
+ __le32 AFListOffset;
+ __le32 AFListSize;
+} rndis_init_cmplt_type;
+
+typedef struct rndis_halt_msg_type
+{
+ __le32 MessageType;
+ __le32 MessageLength;
+ __le32 RequestID;
+} rndis_halt_msg_type;
+
+typedef struct rndis_query_msg_type
+{
+ __le32 MessageType;
+ __le32 MessageLength;
+ __le32 RequestID;
+ __le32 OID;
+ __le32 InformationBufferLength;
+ __le32 InformationBufferOffset;
+ __le32 DeviceVcHandle;
+} rndis_query_msg_type;
+
+typedef struct rndis_query_cmplt_type
+{
+ __le32 MessageType;
+ __le32 MessageLength;
+ __le32 RequestID;
+ __le32 Status;
+ __le32 InformationBufferLength;
+ __le32 InformationBufferOffset;
+} rndis_query_cmplt_type;
+
+typedef struct rndis_set_msg_type
+{
+ __le32 MessageType;
+ __le32 MessageLength;
+ __le32 RequestID;
+ __le32 OID;
+ __le32 InformationBufferLength;
+ __le32 InformationBufferOffset;
+ __le32 DeviceVcHandle;
+} rndis_set_msg_type;
+
+typedef struct rndis_set_cmplt_type
+{
+ __le32 MessageType;
+ __le32 MessageLength;
+ __le32 RequestID;
+ __le32 Status;
+} rndis_set_cmplt_type;
+
+typedef struct rndis_reset_msg_type
+{
+ __le32 MessageType;
+ __le32 MessageLength;
+ __le32 Reserved;
+} rndis_reset_msg_type;
+
+typedef struct rndis_reset_cmplt_type
+{
+ __le32 MessageType;
+ __le32 MessageLength;
+ __le32 Status;
+ __le32 AddressingReset;
+} rndis_reset_cmplt_type;
+
+typedef struct rndis_indicate_status_msg_type
+{
+ __le32 MessageType;
+ __le32 MessageLength;
+ __le32 Status;
+ __le32 StatusBufferLength;
+ __le32 StatusBufferOffset;
+} rndis_indicate_status_msg_type;
+
+typedef struct rndis_keepalive_msg_type
+{
+ __le32 MessageType;
+ __le32 MessageLength;
+ __le32 RequestID;
+} rndis_keepalive_msg_type;
+
+typedef struct rndis_keepalive_cmplt_type
+{
+ __le32 MessageType;
+ __le32 MessageLength;
+ __le32 RequestID;
+ __le32 Status;
+} rndis_keepalive_cmplt_type;
+
+struct rndis_packet_msg_type
+{
+ __le32 MessageType;
+ __le32 MessageLength;
+ __le32 DataOffset;
+ __le32 DataLength;
+ __le32 OOBDataOffset;
+ __le32 OOBDataLength;
+ __le32 NumOOBDataElements;
+ __le32 PerPacketInfoOffset;
+ __le32 PerPacketInfoLength;
+ __le32 VcHandle;
+ __le32 Reserved;
+};
+
+struct rndis_config_parameter
+{
+ __le32 ParameterNameOffset;
+ __le32 ParameterNameLength;
+ __le32 ParameterType;
+ __le32 ParameterValueOffset;
+ __le32 ParameterValueLength;
+};
+
+/* implementation specific */
+enum rndis_state
+{
+ RNDIS_UNINITIALIZED,
+ RNDIS_INITIALIZED,
+ RNDIS_DATA_INITIALIZED,
+};
+
+typedef struct rndis_resp_t
+{
+ struct list_head list;
+ u8 *buf;
+ u32 length;
+ int send;
+} rndis_resp_t;
+
+typedef struct rndis_params
+{
+ u8 confignr;
+ int used;
+ enum rndis_state state;
+ u32 filter;
+ u32 medium;
+ u32 speed;
+ u32 media_state;
+ const u8 *host_mac;
+ struct net_device *dev;
+ struct net_device_stats *stats;
+ u32 vendorID;
+ const char *vendorDescr;
+ int (*ack) (struct net_device *);
+ struct list_head resp_queue;
+} rndis_params;
+
+/* RNDIS Message parser and other useless functions */
+int rndis_msg_parser (u8 configNr, u8 *buf);
+int rndis_register (int (*rndis_control_ack) (struct net_device *));
+void rndis_deregister (int configNr);
+int rndis_set_param_dev (u8 configNr, struct net_device *dev,
+ struct net_device_stats *stats);
+int rndis_set_param_vendor (u8 configNr, u32 vendorID,
+ const char *vendorDescr);
+int rndis_set_param_medium (u8 configNr, u32 medium, u32 speed);
+void rndis_add_hdr (struct sk_buff *skb);
+int rndis_rm_hdr (u8 *buf, u32 *length);
+u8 *rndis_get_next_response (int configNr, u32 *length);
+void rndis_free_response (int configNr, u8 *buf);
+
+int rndis_signal_connect (int configNr);
+int rndis_signal_disconnect (int configNr);
+int rndis_state (int configNr);
+extern void rndis_set_host_mac (int configNr, const u8 *addr);
+
+int __init rndis_init (void);
+void rndis_exit (void);
+
+#endif /* _LINUX_RNDIS_H */
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
new file mode 100644
index 00000000000..2af3f785d5a
--- /dev/null
+++ b/drivers/usb/gadget/serial.c
@@ -0,0 +1,2436 @@
+/*
+ * g_serial.c -- USB gadget serial driver
+ *
+ * Copyright 2003 (C) Al Borchers (alborchers@steinerpoint.com)
+ *
+ * This code is based in part on the Gadget Zero driver, which
+ * is Copyright (C) 2003 by David Brownell, all rights reserved.
+ *
+ * This code also borrows from usbserial.c, which is
+ * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2000 Peter Berger (pberger@brimson.com)
+ * Copyright (C) 2000 Al Borchers (alborchers@steinerpoint.com)
+ *
+ * This software is distributed under the terms of the GNU General
+ * Public License ("GPL") as published by the Free Software Foundation,
+ * either version 2 of that License or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/utsname.h>
+#include <linux/wait.h>
+#include <linux/proc_fs.h>
+#include <linux/device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/unaligned.h>
+#include <asm/uaccess.h>
+
+#include <linux/usb_ch9.h>
+#include <linux/usb_cdc.h>
+#include <linux/usb_gadget.h>
+
+#include "gadget_chips.h"
+
+
+/* Wait Cond */
+
+#define __wait_cond_interruptible(wq, condition, lock, flags, ret) \
+do { \
+ wait_queue_t __wait; \
+ init_waitqueue_entry(&__wait, current); \
+ \
+ add_wait_queue(&wq, &__wait); \
+ for (;;) { \
+ set_current_state(TASK_INTERRUPTIBLE); \
+ if (condition) \
+ break; \
+ if (!signal_pending(current)) { \
+ spin_unlock_irqrestore(lock, flags); \
+ schedule(); \
+ spin_lock_irqsave(lock, flags); \
+ continue; \
+ } \
+ ret = -ERESTARTSYS; \
+ break; \
+ } \
+ current->state = TASK_RUNNING; \
+ remove_wait_queue(&wq, &__wait); \
+} while (0)
+
+#define wait_cond_interruptible(wq, condition, lock, flags) \
+({ \
+ int __ret = 0; \
+ if (!(condition)) \
+ __wait_cond_interruptible(wq, condition, lock, flags, \
+ __ret); \
+ __ret; \
+})
+
+#define __wait_cond_interruptible_timeout(wq, condition, lock, flags, \
+ timeout, ret) \
+do { \
+ signed long __timeout = timeout; \
+ wait_queue_t __wait; \
+ init_waitqueue_entry(&__wait, current); \
+ \
+ add_wait_queue(&wq, &__wait); \
+ for (;;) { \
+ set_current_state(TASK_INTERRUPTIBLE); \
+ if (__timeout == 0) \
+ break; \
+ if (condition) \
+ break; \
+ if (!signal_pending(current)) { \
+ spin_unlock_irqrestore(lock, flags); \
+ __timeout = schedule_timeout(__timeout); \
+ spin_lock_irqsave(lock, flags); \
+ continue; \
+ } \
+ ret = -ERESTARTSYS; \
+ break; \
+ } \
+ current->state = TASK_RUNNING; \
+ remove_wait_queue(&wq, &__wait); \
+} while (0)
+
+#define wait_cond_interruptible_timeout(wq, condition, lock, flags, \
+ timeout) \
+({ \
+ int __ret = 0; \
+ if (!(condition)) \
+ __wait_cond_interruptible_timeout(wq, condition, lock, \
+ flags, timeout, __ret); \
+ __ret; \
+})
+
+
+/* Defines */
+
+#define GS_VERSION_STR "v2.0"
+#define GS_VERSION_NUM 0x0200
+
+#define GS_LONG_NAME "Gadget Serial"
+#define GS_SHORT_NAME "g_serial"
+
+#define GS_MAJOR 127
+#define GS_MINOR_START 0
+
+#define GS_NUM_PORTS 16
+
+#define GS_NUM_CONFIGS 1
+#define GS_NO_CONFIG_ID 0
+#define GS_BULK_CONFIG_ID 1
+#define GS_ACM_CONFIG_ID 2
+
+#define GS_MAX_NUM_INTERFACES 2
+#define GS_BULK_INTERFACE_ID 0
+#define GS_CONTROL_INTERFACE_ID 0
+#define GS_DATA_INTERFACE_ID 1
+
+#define GS_MAX_DESC_LEN 256
+
+#define GS_DEFAULT_READ_Q_SIZE 32
+#define GS_DEFAULT_WRITE_Q_SIZE 32
+
+#define GS_DEFAULT_WRITE_BUF_SIZE 8192
+#define GS_TMP_BUF_SIZE 8192
+
+#define GS_CLOSE_TIMEOUT 15
+
+#define GS_DEFAULT_USE_ACM 0
+
+#define GS_DEFAULT_DTE_RATE 9600
+#define GS_DEFAULT_DATA_BITS 8
+#define GS_DEFAULT_PARITY USB_CDC_NO_PARITY
+#define GS_DEFAULT_CHAR_FORMAT USB_CDC_1_STOP_BITS
+
+/* select highspeed/fullspeed, hiding highspeed if not configured */
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+#define GS_SPEED_SELECT(is_hs,hs,fs) ((is_hs) ? (hs) : (fs))
+#else
+#define GS_SPEED_SELECT(is_hs,hs,fs) (fs)
+#endif /* CONFIG_USB_GADGET_DUALSPEED */
+
+/* debug settings */
+#ifdef GS_DEBUG
+static int debug = 1;
+
+#define gs_debug(format, arg...) \
+ do { if (debug) printk(KERN_DEBUG format, ## arg); } while(0)
+#define gs_debug_level(level, format, arg...) \
+ do { if (debug>=level) printk(KERN_DEBUG format, ## arg); } while(0)
+
+#else
+
+#define gs_debug(format, arg...) \
+ do { } while(0)
+#define gs_debug_level(level, format, arg...) \
+ do { } while(0)
+
+#endif /* GS_DEBUG */
+
+/* Thanks to NetChip Technologies for donating this product ID.
+ *
+ * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
+ * Instead: allocate your own, using normal USB-IF procedures.
+ */
+#define GS_VENDOR_ID 0x0525 /* NetChip */
+#define GS_PRODUCT_ID 0xa4a6 /* Linux-USB Serial Gadget */
+#define GS_CDC_PRODUCT_ID 0xa4a7 /* ... as CDC-ACM */
+
+#define GS_LOG2_NOTIFY_INTERVAL 5 /* 1 << 5 == 32 msec */
+#define GS_NOTIFY_MAXPACKET 8
+
+
+/* Structures */
+
+struct gs_dev;
+
+/* circular buffer */
+struct gs_buf {
+ unsigned int buf_size;
+ char *buf_buf;
+ char *buf_get;
+ char *buf_put;
+};
+
+/* list of requests */
+struct gs_req_entry {
+ struct list_head re_entry;
+ struct usb_request *re_req;
+};
+
+/* the port structure holds info for each port, one for each minor number */
+struct gs_port {
+ struct gs_dev *port_dev; /* pointer to device struct */
+ struct tty_struct *port_tty; /* pointer to tty struct */
+ spinlock_t port_lock;
+ int port_num;
+ int port_open_count;
+ int port_in_use; /* open/close in progress */
+ wait_queue_head_t port_write_wait;/* waiting to write */
+ struct gs_buf *port_write_buf;
+ struct usb_cdc_line_coding port_line_coding;
+};
+
+/* the device structure holds info for the USB device */
+struct gs_dev {
+ struct usb_gadget *dev_gadget; /* gadget device pointer */
+ spinlock_t dev_lock; /* lock for set/reset config */
+ int dev_config; /* configuration number */
+ struct usb_ep *dev_notify_ep; /* address of notify endpoint */
+ struct usb_ep *dev_in_ep; /* address of in endpoint */
+ struct usb_ep *dev_out_ep; /* address of out endpoint */
+ struct usb_endpoint_descriptor /* desciptor of notify ep */
+ *dev_notify_ep_desc;
+ struct usb_endpoint_descriptor /* descriptor of in endpoint */
+ *dev_in_ep_desc;
+ struct usb_endpoint_descriptor /* descriptor of out endpoint */
+ *dev_out_ep_desc;
+ struct usb_request *dev_ctrl_req; /* control request */
+ struct list_head dev_req_list; /* list of write requests */
+ int dev_sched_port; /* round robin port scheduled */
+ struct gs_port *dev_port[GS_NUM_PORTS]; /* the ports */
+};
+
+
+/* Functions */
+
+/* module */
+static int __init gs_module_init(void);
+static void __exit gs_module_exit(void);
+
+/* tty driver */
+static int gs_open(struct tty_struct *tty, struct file *file);
+static void gs_close(struct tty_struct *tty, struct file *file);
+static int gs_write(struct tty_struct *tty,
+ const unsigned char *buf, int count);
+static void gs_put_char(struct tty_struct *tty, unsigned char ch);
+static void gs_flush_chars(struct tty_struct *tty);
+static int gs_write_room(struct tty_struct *tty);
+static int gs_chars_in_buffer(struct tty_struct *tty);
+static void gs_throttle(struct tty_struct * tty);
+static void gs_unthrottle(struct tty_struct * tty);
+static void gs_break(struct tty_struct *tty, int break_state);
+static int gs_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg);
+static void gs_set_termios(struct tty_struct *tty, struct termios *old);
+
+static int gs_send(struct gs_dev *dev);
+static int gs_send_packet(struct gs_dev *dev, char *packet,
+ unsigned int size);
+static int gs_recv_packet(struct gs_dev *dev, char *packet,
+ unsigned int size);
+static void gs_read_complete(struct usb_ep *ep, struct usb_request *req);
+static void gs_write_complete(struct usb_ep *ep, struct usb_request *req);
+
+/* gadget driver */
+static int gs_bind(struct usb_gadget *gadget);
+static void gs_unbind(struct usb_gadget *gadget);
+static int gs_setup(struct usb_gadget *gadget,
+ const struct usb_ctrlrequest *ctrl);
+static int gs_setup_standard(struct usb_gadget *gadget,
+ const struct usb_ctrlrequest *ctrl);
+static int gs_setup_class(struct usb_gadget *gadget,
+ const struct usb_ctrlrequest *ctrl);
+static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req);
+static void gs_disconnect(struct usb_gadget *gadget);
+static int gs_set_config(struct gs_dev *dev, unsigned config);
+static void gs_reset_config(struct gs_dev *dev);
+static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed,
+ u8 type, unsigned int index, int is_otg);
+
+static struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned int len,
+ int kmalloc_flags);
+static void gs_free_req(struct usb_ep *ep, struct usb_request *req);
+
+static struct gs_req_entry *gs_alloc_req_entry(struct usb_ep *ep, unsigned len,
+ int kmalloc_flags);
+static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req);
+
+static int gs_alloc_ports(struct gs_dev *dev, int kmalloc_flags);
+static void gs_free_ports(struct gs_dev *dev);
+
+/* circular buffer */
+static struct gs_buf *gs_buf_alloc(unsigned int size, int kmalloc_flags);
+static void gs_buf_free(struct gs_buf *gb);
+static void gs_buf_clear(struct gs_buf *gb);
+static unsigned int gs_buf_data_avail(struct gs_buf *gb);
+static unsigned int gs_buf_space_avail(struct gs_buf *gb);
+static unsigned int gs_buf_put(struct gs_buf *gb, const char *buf,
+ unsigned int count);
+static unsigned int gs_buf_get(struct gs_buf *gb, char *buf,
+ unsigned int count);
+
+/* external functions */
+extern int net2280_set_fifo_mode(struct usb_gadget *gadget, int mode);
+
+
+/* Globals */
+
+static struct gs_dev *gs_device;
+
+static const char *EP_IN_NAME;
+static const char *EP_OUT_NAME;
+static const char *EP_NOTIFY_NAME;
+
+static struct semaphore gs_open_close_sem[GS_NUM_PORTS];
+
+static unsigned int read_q_size = GS_DEFAULT_READ_Q_SIZE;
+static unsigned int write_q_size = GS_DEFAULT_WRITE_Q_SIZE;
+
+static unsigned int write_buf_size = GS_DEFAULT_WRITE_BUF_SIZE;
+
+static unsigned int use_acm = GS_DEFAULT_USE_ACM;
+
+
+/* tty driver struct */
+static struct tty_operations gs_tty_ops = {
+ .open = gs_open,
+ .close = gs_close,
+ .write = gs_write,
+ .put_char = gs_put_char,
+ .flush_chars = gs_flush_chars,
+ .write_room = gs_write_room,
+ .ioctl = gs_ioctl,
+ .set_termios = gs_set_termios,
+ .throttle = gs_throttle,
+ .unthrottle = gs_unthrottle,
+ .break_ctl = gs_break,
+ .chars_in_buffer = gs_chars_in_buffer,
+};
+static struct tty_driver *gs_tty_driver;
+
+/* gadget driver struct */
+static struct usb_gadget_driver gs_gadget_driver = {
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+ .speed = USB_SPEED_HIGH,
+#else
+ .speed = USB_SPEED_FULL,
+#endif /* CONFIG_USB_GADGET_DUALSPEED */
+ .function = GS_LONG_NAME,
+ .bind = gs_bind,
+ .unbind = gs_unbind,
+ .setup = gs_setup,
+ .disconnect = gs_disconnect,
+ .driver = {
+ .name = GS_SHORT_NAME,
+ /* .shutdown = ... */
+ /* .suspend = ... */
+ /* .resume = ... */
+ },
+};
+
+
+/* USB descriptors */
+
+#define GS_MANUFACTURER_STR_ID 1
+#define GS_PRODUCT_STR_ID 2
+#define GS_SERIAL_STR_ID 3
+#define GS_BULK_CONFIG_STR_ID 4
+#define GS_ACM_CONFIG_STR_ID 5
+#define GS_CONTROL_STR_ID 6
+#define GS_DATA_STR_ID 7
+
+/* static strings, in UTF-8 */
+static char manufacturer[50];
+static struct usb_string gs_strings[] = {
+ { GS_MANUFACTURER_STR_ID, manufacturer },
+ { GS_PRODUCT_STR_ID, GS_LONG_NAME },
+ { GS_SERIAL_STR_ID, "0" },
+ { GS_BULK_CONFIG_STR_ID, "Gadget Serial Bulk" },
+ { GS_ACM_CONFIG_STR_ID, "Gadget Serial CDC ACM" },
+ { GS_CONTROL_STR_ID, "Gadget Serial Control" },
+ { GS_DATA_STR_ID, "Gadget Serial Data" },
+ { } /* end of list */
+};
+
+static struct usb_gadget_strings gs_string_table = {
+ .language = 0x0409, /* en-us */
+ .strings = gs_strings,
+};
+
+static struct usb_device_descriptor gs_device_desc = {
+ .bLength = USB_DT_DEVICE_SIZE,
+ .bDescriptorType = USB_DT_DEVICE,
+ .bcdUSB = __constant_cpu_to_le16(0x0200),
+ .bDeviceSubClass = 0,
+ .bDeviceProtocol = 0,
+ .idVendor = __constant_cpu_to_le16(GS_VENDOR_ID),
+ .idProduct = __constant_cpu_to_le16(GS_PRODUCT_ID),
+ .iManufacturer = GS_MANUFACTURER_STR_ID,
+ .iProduct = GS_PRODUCT_STR_ID,
+ .iSerialNumber = GS_SERIAL_STR_ID,
+ .bNumConfigurations = GS_NUM_CONFIGS,
+};
+
+static struct usb_otg_descriptor gs_otg_descriptor = {
+ .bLength = sizeof(gs_otg_descriptor),
+ .bDescriptorType = USB_DT_OTG,
+ .bmAttributes = USB_OTG_SRP,
+};
+
+static struct usb_config_descriptor gs_bulk_config_desc = {
+ .bLength = USB_DT_CONFIG_SIZE,
+ .bDescriptorType = USB_DT_CONFIG,
+ /* .wTotalLength computed dynamically */
+ .bNumInterfaces = 1,
+ .bConfigurationValue = GS_BULK_CONFIG_ID,
+ .iConfiguration = GS_BULK_CONFIG_STR_ID,
+ .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
+ .bMaxPower = 1,
+};
+
+static struct usb_config_descriptor gs_acm_config_desc = {
+ .bLength = USB_DT_CONFIG_SIZE,
+ .bDescriptorType = USB_DT_CONFIG,
+ /* .wTotalLength computed dynamically */
+ .bNumInterfaces = 2,
+ .bConfigurationValue = GS_ACM_CONFIG_ID,
+ .iConfiguration = GS_ACM_CONFIG_STR_ID,
+ .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
+ .bMaxPower = 1,
+};
+
+static const struct usb_interface_descriptor gs_bulk_interface_desc = {
+ .bLength = USB_DT_INTERFACE_SIZE,
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bInterfaceNumber = GS_BULK_INTERFACE_ID,
+ .bNumEndpoints = 2,
+ .bInterfaceClass = USB_CLASS_CDC_DATA,
+ .bInterfaceSubClass = 0,
+ .bInterfaceProtocol = 0,
+ .iInterface = GS_DATA_STR_ID,
+};
+
+static const struct usb_interface_descriptor gs_control_interface_desc = {
+ .bLength = USB_DT_INTERFACE_SIZE,
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bInterfaceNumber = GS_CONTROL_INTERFACE_ID,
+ .bNumEndpoints = 1,
+ .bInterfaceClass = USB_CLASS_COMM,
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_ACM,
+ .bInterfaceProtocol = USB_CDC_ACM_PROTO_AT_V25TER,
+ .iInterface = GS_CONTROL_STR_ID,
+};
+
+static const struct usb_interface_descriptor gs_data_interface_desc = {
+ .bLength = USB_DT_INTERFACE_SIZE,
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bInterfaceNumber = GS_DATA_INTERFACE_ID,
+ .bNumEndpoints = 2,
+ .bInterfaceClass = USB_CLASS_CDC_DATA,
+ .bInterfaceSubClass = 0,
+ .bInterfaceProtocol = 0,
+ .iInterface = GS_DATA_STR_ID,
+};
+
+static const struct usb_cdc_header_desc gs_header_desc = {
+ .bLength = sizeof(gs_header_desc),
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_HEADER_TYPE,
+ .bcdCDC = __constant_cpu_to_le16(0x0110),
+};
+
+static const struct usb_cdc_call_mgmt_descriptor gs_call_mgmt_descriptor = {
+ .bLength = sizeof(gs_call_mgmt_descriptor),
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE,
+ .bmCapabilities = 0,
+ .bDataInterface = 1, /* index of data interface */
+};
+
+static struct usb_cdc_acm_descriptor gs_acm_descriptor = {
+ .bLength = sizeof(gs_acm_descriptor),
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_ACM_TYPE,
+ .bmCapabilities = 0,
+};
+
+static const struct usb_cdc_union_desc gs_union_desc = {
+ .bLength = sizeof(gs_union_desc),
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_UNION_TYPE,
+ .bMasterInterface0 = 0, /* index of control interface */
+ .bSlaveInterface0 = 1, /* index of data interface */
+};
+
+static struct usb_endpoint_descriptor gs_fullspeed_notify_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .wMaxPacketSize = __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET),
+ .bInterval = 1 << GS_LOG2_NOTIFY_INTERVAL,
+};
+
+static struct usb_endpoint_descriptor gs_fullspeed_in_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor gs_fullspeed_out_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static const struct usb_descriptor_header *gs_bulk_fullspeed_function[] = {
+ (struct usb_descriptor_header *) &gs_otg_descriptor,
+ (struct usb_descriptor_header *) &gs_bulk_interface_desc,
+ (struct usb_descriptor_header *) &gs_fullspeed_in_desc,
+ (struct usb_descriptor_header *) &gs_fullspeed_out_desc,
+ NULL,
+};
+
+static const struct usb_descriptor_header *gs_acm_fullspeed_function[] = {
+ (struct usb_descriptor_header *) &gs_otg_descriptor,
+ (struct usb_descriptor_header *) &gs_control_interface_desc,
+ (struct usb_descriptor_header *) &gs_header_desc,
+ (struct usb_descriptor_header *) &gs_call_mgmt_descriptor,
+ (struct usb_descriptor_header *) &gs_acm_descriptor,
+ (struct usb_descriptor_header *) &gs_union_desc,
+ (struct usb_descriptor_header *) &gs_fullspeed_notify_desc,
+ (struct usb_descriptor_header *) &gs_data_interface_desc,
+ (struct usb_descriptor_header *) &gs_fullspeed_in_desc,
+ (struct usb_descriptor_header *) &gs_fullspeed_out_desc,
+ NULL,
+};
+
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+static struct usb_endpoint_descriptor gs_highspeed_notify_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .wMaxPacketSize = __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET),
+ .bInterval = GS_LOG2_NOTIFY_INTERVAL+4,
+};
+
+static struct usb_endpoint_descriptor gs_highspeed_in_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor gs_highspeed_out_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16(512),
+};
+
+static struct usb_qualifier_descriptor gs_qualifier_desc = {
+ .bLength = sizeof(struct usb_qualifier_descriptor),
+ .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
+ .bcdUSB = __constant_cpu_to_le16 (0x0200),
+ /* assumes ep0 uses the same value for both speeds ... */
+ .bNumConfigurations = GS_NUM_CONFIGS,
+};
+
+static const struct usb_descriptor_header *gs_bulk_highspeed_function[] = {
+ (struct usb_descriptor_header *) &gs_otg_descriptor,
+ (struct usb_descriptor_header *) &gs_bulk_interface_desc,
+ (struct usb_descriptor_header *) &gs_highspeed_in_desc,
+ (struct usb_descriptor_header *) &gs_highspeed_out_desc,
+ NULL,
+};
+
+static const struct usb_descriptor_header *gs_acm_highspeed_function[] = {
+ (struct usb_descriptor_header *) &gs_otg_descriptor,
+ (struct usb_descriptor_header *) &gs_control_interface_desc,
+ (struct usb_descriptor_header *) &gs_header_desc,
+ (struct usb_descriptor_header *) &gs_call_mgmt_descriptor,
+ (struct usb_descriptor_header *) &gs_acm_descriptor,
+ (struct usb_descriptor_header *) &gs_union_desc,
+ (struct usb_descriptor_header *) &gs_highspeed_notify_desc,
+ (struct usb_descriptor_header *) &gs_data_interface_desc,
+ (struct usb_descriptor_header *) &gs_highspeed_in_desc,
+ (struct usb_descriptor_header *) &gs_highspeed_out_desc,
+ NULL,
+};
+
+#endif /* CONFIG_USB_GADGET_DUALSPEED */
+
+
+/* Module */
+MODULE_DESCRIPTION(GS_LONG_NAME);
+MODULE_AUTHOR("Al Borchers");
+MODULE_LICENSE("GPL");
+
+#ifdef GS_DEBUG
+module_param(debug, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debugging, 0=off, 1=on");
+#endif
+
+module_param(read_q_size, uint, S_IRUGO);
+MODULE_PARM_DESC(read_q_size, "Read request queue size, default=32");
+
+module_param(write_q_size, uint, S_IRUGO);
+MODULE_PARM_DESC(write_q_size, "Write request queue size, default=32");
+
+module_param(write_buf_size, uint, S_IRUGO);
+MODULE_PARM_DESC(write_buf_size, "Write buffer size, default=8192");
+
+module_param(use_acm, uint, S_IRUGO);
+MODULE_PARM_DESC(use_acm, "Use CDC ACM, 0=no, 1=yes, default=no");
+
+module_init(gs_module_init);
+module_exit(gs_module_exit);
+
+/*
+* gs_module_init
+*
+* Register as a USB gadget driver and a tty driver.
+*/
+static int __init gs_module_init(void)
+{
+ int i;
+ int retval;
+
+ retval = usb_gadget_register_driver(&gs_gadget_driver);
+ if (retval) {
+ printk(KERN_ERR "gs_module_init: cannot register gadget driver, ret=%d\n", retval);
+ return retval;
+ }
+
+ gs_tty_driver = alloc_tty_driver(GS_NUM_PORTS);
+ if (!gs_tty_driver)
+ return -ENOMEM;
+ gs_tty_driver->owner = THIS_MODULE;
+ gs_tty_driver->driver_name = GS_SHORT_NAME;
+ gs_tty_driver->name = "ttygs";
+ gs_tty_driver->devfs_name = "usb/ttygs/";
+ gs_tty_driver->major = GS_MAJOR;
+ gs_tty_driver->minor_start = GS_MINOR_START;
+ gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
+ gs_tty_driver->subtype = SERIAL_TYPE_NORMAL;
+ gs_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS;
+ gs_tty_driver->init_termios = tty_std_termios;
+ gs_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ tty_set_operations(gs_tty_driver, &gs_tty_ops);
+
+ for (i=0; i < GS_NUM_PORTS; i++)
+ sema_init(&gs_open_close_sem[i], 1);
+
+ retval = tty_register_driver(gs_tty_driver);
+ if (retval) {
+ usb_gadget_unregister_driver(&gs_gadget_driver);
+ put_tty_driver(gs_tty_driver);
+ printk(KERN_ERR "gs_module_init: cannot register tty driver, ret=%d\n", retval);
+ return retval;
+ }
+
+ printk(KERN_INFO "gs_module_init: %s %s loaded\n", GS_LONG_NAME, GS_VERSION_STR);
+ return 0;
+}
+
+/*
+* gs_module_exit
+*
+* Unregister as a tty driver and a USB gadget driver.
+*/
+static void __exit gs_module_exit(void)
+{
+ tty_unregister_driver(gs_tty_driver);
+ put_tty_driver(gs_tty_driver);
+ usb_gadget_unregister_driver(&gs_gadget_driver);
+
+ printk(KERN_INFO "gs_module_exit: %s %s unloaded\n", GS_LONG_NAME, GS_VERSION_STR);
+}
+
+/* TTY Driver */
+
+/*
+ * gs_open
+ */
+static int gs_open(struct tty_struct *tty, struct file *file)
+{
+ int port_num;
+ unsigned long flags;
+ struct gs_port *port;
+ struct gs_dev *dev;
+ struct gs_buf *buf;
+ struct semaphore *sem;
+ int ret;
+
+ port_num = tty->index;
+
+ gs_debug("gs_open: (%d,%p,%p)\n", port_num, tty, file);
+
+ if (port_num < 0 || port_num >= GS_NUM_PORTS) {
+ printk(KERN_ERR "gs_open: (%d,%p,%p) invalid port number\n",
+ port_num, tty, file);
+ return -ENODEV;
+ }
+
+ dev = gs_device;
+
+ if (dev == NULL) {
+ printk(KERN_ERR "gs_open: (%d,%p,%p) NULL device pointer\n",
+ port_num, tty, file);
+ return -ENODEV;
+ }
+
+ sem = &gs_open_close_sem[port_num];
+ if (down_interruptible(sem)) {
+ printk(KERN_ERR
+ "gs_open: (%d,%p,%p) interrupted waiting for semaphore\n",
+ port_num, tty, file);
+ return -ERESTARTSYS;
+ }
+
+ spin_lock_irqsave(&dev->dev_lock, flags);
+
+ if (dev->dev_config == GS_NO_CONFIG_ID) {
+ printk(KERN_ERR
+ "gs_open: (%d,%p,%p) device is not connected\n",
+ port_num, tty, file);
+ ret = -ENODEV;
+ goto exit_unlock_dev;
+ }
+
+ port = dev->dev_port[port_num];
+
+ if (port == NULL) {
+ printk(KERN_ERR "gs_open: (%d,%p,%p) NULL port pointer\n",
+ port_num, tty, file);
+ ret = -ENODEV;
+ goto exit_unlock_dev;
+ }
+
+ spin_lock(&port->port_lock);
+ spin_unlock(&dev->dev_lock);
+
+ if (port->port_dev == NULL) {
+ printk(KERN_ERR "gs_open: (%d,%p,%p) port disconnected (1)\n",
+ port_num, tty, file);
+ ret = -EIO;
+ goto exit_unlock_port;
+ }
+
+ if (port->port_open_count > 0) {
+ ++port->port_open_count;
+ gs_debug("gs_open: (%d,%p,%p) already open\n",
+ port_num, tty, file);
+ ret = 0;
+ goto exit_unlock_port;
+ }
+
+ tty->driver_data = NULL;
+
+ /* mark port as in use, we can drop port lock and sleep if necessary */
+ port->port_in_use = 1;
+
+ /* allocate write buffer on first open */
+ if (port->port_write_buf == NULL) {
+ spin_unlock_irqrestore(&port->port_lock, flags);
+ buf = gs_buf_alloc(write_buf_size, GFP_KERNEL);
+ spin_lock_irqsave(&port->port_lock, flags);
+
+ /* might have been disconnected while asleep, check */
+ if (port->port_dev == NULL) {
+ printk(KERN_ERR
+ "gs_open: (%d,%p,%p) port disconnected (2)\n",
+ port_num, tty, file);
+ port->port_in_use = 0;
+ ret = -EIO;
+ goto exit_unlock_port;
+ }
+
+ if ((port->port_write_buf=buf) == NULL) {
+ printk(KERN_ERR "gs_open: (%d,%p,%p) cannot allocate port write buffer\n",
+ port_num, tty, file);
+ port->port_in_use = 0;
+ ret = -ENOMEM;
+ goto exit_unlock_port;
+ }
+
+ }
+
+ /* wait for carrier detect (not implemented) */
+
+ /* might have been disconnected while asleep, check */
+ if (port->port_dev == NULL) {
+ printk(KERN_ERR "gs_open: (%d,%p,%p) port disconnected (3)\n",
+ port_num, tty, file);
+ port->port_in_use = 0;
+ ret = -EIO;
+ goto exit_unlock_port;
+ }
+
+ tty->driver_data = port;
+ port->port_tty = tty;
+ port->port_open_count = 1;
+ port->port_in_use = 0;
+
+ gs_debug("gs_open: (%d,%p,%p) completed\n", port_num, tty, file);
+
+ ret = 0;
+
+exit_unlock_port:
+ spin_unlock_irqrestore(&port->port_lock, flags);
+ up(sem);
+ return ret;
+
+exit_unlock_dev:
+ spin_unlock_irqrestore(&dev->dev_lock, flags);
+ up(sem);
+ return ret;
+
+}
+
+/*
+ * gs_close
+ */
+static void gs_close(struct tty_struct *tty, struct file *file)
+{
+ unsigned long flags;
+ struct gs_port *port = tty->driver_data;
+ struct semaphore *sem;
+
+ if (port == NULL) {
+ printk(KERN_ERR "gs_close: NULL port pointer\n");
+ return;
+ }
+
+ gs_debug("gs_close: (%d,%p,%p)\n", port->port_num, tty, file);
+
+ sem = &gs_open_close_sem[port->port_num];
+ down(sem);
+
+ spin_lock_irqsave(&port->port_lock, flags);
+
+ if (port->port_open_count == 0) {
+ printk(KERN_ERR
+ "gs_close: (%d,%p,%p) port is already closed\n",
+ port->port_num, tty, file);
+ goto exit;
+ }
+
+ if (port->port_open_count > 1) {
+ --port->port_open_count;
+ goto exit;
+ }
+
+ /* free disconnected port on final close */
+ if (port->port_dev == NULL) {
+ kfree(port);
+ goto exit;
+ }
+
+ /* mark port as closed but in use, we can drop port lock */
+ /* and sleep if necessary */
+ port->port_in_use = 1;
+ port->port_open_count = 0;
+
+ /* wait for write buffer to drain, or */
+ /* at most GS_CLOSE_TIMEOUT seconds */
+ if (gs_buf_data_avail(port->port_write_buf) > 0) {
+ wait_cond_interruptible_timeout(port->port_write_wait,
+ port->port_dev == NULL
+ || gs_buf_data_avail(port->port_write_buf) == 0,
+ &port->port_lock, flags, GS_CLOSE_TIMEOUT * HZ);
+ }
+
+ /* free disconnected port on final close */
+ /* (might have happened during the above sleep) */
+ if (port->port_dev == NULL) {
+ kfree(port);
+ goto exit;
+ }
+
+ gs_buf_clear(port->port_write_buf);
+
+ tty->driver_data = NULL;
+ port->port_tty = NULL;
+ port->port_in_use = 0;
+
+ gs_debug("gs_close: (%d,%p,%p) completed\n",
+ port->port_num, tty, file);
+
+exit:
+ spin_unlock_irqrestore(&port->port_lock, flags);
+ up(sem);
+}
+
+/*
+ * gs_write
+ */
+static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count)
+{
+ unsigned long flags;
+ struct gs_port *port = tty->driver_data;
+ int ret;
+
+ if (port == NULL) {
+ printk(KERN_ERR "gs_write: NULL port pointer\n");
+ return -EIO;
+ }
+
+ gs_debug("gs_write: (%d,%p) writing %d bytes\n", port->port_num, tty,
+ count);
+
+ if (count == 0)
+ return 0;
+
+ spin_lock_irqsave(&port->port_lock, flags);
+
+ if (port->port_dev == NULL) {
+ printk(KERN_ERR "gs_write: (%d,%p) port is not connected\n",
+ port->port_num, tty);
+ ret = -EIO;
+ goto exit;
+ }
+
+ if (port->port_open_count == 0) {
+ printk(KERN_ERR "gs_write: (%d,%p) port is closed\n",
+ port->port_num, tty);
+ ret = -EBADF;
+ goto exit;
+ }
+
+ count = gs_buf_put(port->port_write_buf, buf, count);
+
+ spin_unlock_irqrestore(&port->port_lock, flags);
+
+ gs_send(gs_device);
+
+ gs_debug("gs_write: (%d,%p) wrote %d bytes\n", port->port_num, tty,
+ count);
+
+ return count;
+
+exit:
+ spin_unlock_irqrestore(&port->port_lock, flags);
+ return ret;
+}
+
+/*
+ * gs_put_char
+ */
+static void gs_put_char(struct tty_struct *tty, unsigned char ch)
+{
+ unsigned long flags;
+ struct gs_port *port = tty->driver_data;
+
+ if (port == NULL) {
+ printk(KERN_ERR "gs_put_char: NULL port pointer\n");
+ return;
+ }
+
+ gs_debug("gs_put_char: (%d,%p) char=0x%x, called from %p, %p, %p\n", port->port_num, tty, ch, __builtin_return_address(0), __builtin_return_address(1), __builtin_return_address(2));
+
+ spin_lock_irqsave(&port->port_lock, flags);
+
+ if (port->port_dev == NULL) {
+ printk(KERN_ERR "gs_put_char: (%d,%p) port is not connected\n",
+ port->port_num, tty);
+ goto exit;
+ }
+
+ if (port->port_open_count == 0) {
+ printk(KERN_ERR "gs_put_char: (%d,%p) port is closed\n",
+ port->port_num, tty);
+ goto exit;
+ }
+
+ gs_buf_put(port->port_write_buf, &ch, 1);
+
+exit:
+ spin_unlock_irqrestore(&port->port_lock, flags);
+}
+
+/*
+ * gs_flush_chars
+ */
+static void gs_flush_chars(struct tty_struct *tty)
+{
+ unsigned long flags;
+ struct gs_port *port = tty->driver_data;
+
+ if (port == NULL) {
+ printk(KERN_ERR "gs_flush_chars: NULL port pointer\n");
+ return;
+ }
+
+ gs_debug("gs_flush_chars: (%d,%p)\n", port->port_num, tty);
+
+ spin_lock_irqsave(&port->port_lock, flags);
+
+ if (port->port_dev == NULL) {
+ printk(KERN_ERR
+ "gs_flush_chars: (%d,%p) port is not connected\n",
+ port->port_num, tty);
+ goto exit;
+ }
+
+ if (port->port_open_count == 0) {
+ printk(KERN_ERR "gs_flush_chars: (%d,%p) port is closed\n",
+ port->port_num, tty);
+ goto exit;
+ }
+
+ spin_unlock_irqrestore(&port->port_lock, flags);
+
+ gs_send(gs_device);
+
+ return;
+
+exit:
+ spin_unlock_irqrestore(&port->port_lock, flags);
+}
+
+/*
+ * gs_write_room
+ */
+static int gs_write_room(struct tty_struct *tty)
+{
+
+ int room = 0;
+ unsigned long flags;
+ struct gs_port *port = tty->driver_data;
+
+
+ if (port == NULL)
+ return 0;
+
+ spin_lock_irqsave(&port->port_lock, flags);
+
+ if (port->port_dev != NULL && port->port_open_count > 0
+ && port->port_write_buf != NULL)
+ room = gs_buf_space_avail(port->port_write_buf);
+
+ spin_unlock_irqrestore(&port->port_lock, flags);
+
+ gs_debug("gs_write_room: (%d,%p) room=%d\n",
+ port->port_num, tty, room);
+
+ return room;
+}
+
+/*
+ * gs_chars_in_buffer
+ */
+static int gs_chars_in_buffer(struct tty_struct *tty)
+{
+ int chars = 0;
+ unsigned long flags;
+ struct gs_port *port = tty->driver_data;
+
+ if (port == NULL)
+ return 0;
+
+ spin_lock_irqsave(&port->port_lock, flags);
+
+ if (port->port_dev != NULL && port->port_open_count > 0
+ && port->port_write_buf != NULL)
+ chars = gs_buf_data_avail(port->port_write_buf);
+
+ spin_unlock_irqrestore(&port->port_lock, flags);
+
+ gs_debug("gs_chars_in_buffer: (%d,%p) chars=%d\n",
+ port->port_num, tty, chars);
+
+ return chars;
+}
+
+/*
+ * gs_throttle
+ */
+static void gs_throttle(struct tty_struct *tty)
+{
+}
+
+/*
+ * gs_unthrottle
+ */
+static void gs_unthrottle(struct tty_struct *tty)
+{
+}
+
+/*
+ * gs_break
+ */
+static void gs_break(struct tty_struct *tty, int break_state)
+{
+}
+
+/*
+ * gs_ioctl
+ */
+static int gs_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg)
+{
+ struct gs_port *port = tty->driver_data;
+
+ if (port == NULL) {
+ printk(KERN_ERR "gs_ioctl: NULL port pointer\n");
+ return -EIO;
+ }
+
+ gs_debug("gs_ioctl: (%d,%p,%p) cmd=0x%4.4x, arg=%lu\n",
+ port->port_num, tty, file, cmd, arg);
+
+ /* handle ioctls */
+
+ /* could not handle ioctl */
+ return -ENOIOCTLCMD;
+}
+
+/*
+ * gs_set_termios
+ */
+static void gs_set_termios(struct tty_struct *tty, struct termios *old)
+{
+}
+
+/*
+* gs_send
+*
+* This function finds available write requests, calls
+* gs_send_packet to fill these packets with data, and
+* continues until either there are no more write requests
+* available or no more data to send. This function is
+* run whenever data arrives or write requests are available.
+*/
+static int gs_send(struct gs_dev *dev)
+{
+ int ret,len;
+ unsigned long flags;
+ struct usb_ep *ep;
+ struct usb_request *req;
+ struct gs_req_entry *req_entry;
+
+ if (dev == NULL) {
+ printk(KERN_ERR "gs_send: NULL device pointer\n");
+ return -ENODEV;
+ }
+
+ spin_lock_irqsave(&dev->dev_lock, flags);
+
+ ep = dev->dev_in_ep;
+
+ while(!list_empty(&dev->dev_req_list)) {
+
+ req_entry = list_entry(dev->dev_req_list.next,
+ struct gs_req_entry, re_entry);
+
+ req = req_entry->re_req;
+
+ len = gs_send_packet(dev, req->buf, ep->maxpacket);
+
+ if (len > 0) {
+gs_debug_level(3, "gs_send: len=%d, 0x%2.2x 0x%2.2x 0x%2.2x ...\n", len, *((unsigned char *)req->buf), *((unsigned char *)req->buf+1), *((unsigned char *)req->buf+2));
+ list_del(&req_entry->re_entry);
+ req->length = len;
+ if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) {
+ printk(KERN_ERR
+ "gs_send: cannot queue read request, ret=%d\n",
+ ret);
+ break;
+ }
+ } else {
+ break;
+ }
+
+ }
+
+ spin_unlock_irqrestore(&dev->dev_lock, flags);
+
+ return 0;
+}
+
+/*
+ * gs_send_packet
+ *
+ * If there is data to send, a packet is built in the given
+ * buffer and the size is returned. If there is no data to
+ * send, 0 is returned. If there is any error a negative
+ * error number is returned.
+ *
+ * Called during USB completion routine, on interrupt time.
+ *
+ * We assume that disconnect will not happen until all completion
+ * routines have completed, so we can assume that the dev_port
+ * array does not change during the lifetime of this function.
+ */
+static int gs_send_packet(struct gs_dev *dev, char *packet, unsigned int size)
+{
+ unsigned int len;
+ struct gs_port *port;
+
+ /* TEMPORARY -- only port 0 is supported right now */
+ port = dev->dev_port[0];
+
+ if (port == NULL) {
+ printk(KERN_ERR
+ "gs_send_packet: port=%d, NULL port pointer\n",
+ 0);
+ return -EIO;
+ }
+
+ spin_lock(&port->port_lock);
+
+ len = gs_buf_data_avail(port->port_write_buf);
+ if (len < size)
+ size = len;
+
+ if (size == 0)
+ goto exit;
+
+ size = gs_buf_get(port->port_write_buf, packet, size);
+
+ if (port->port_tty)
+ wake_up_interruptible(&port->port_tty->write_wait);
+
+exit:
+ spin_unlock(&port->port_lock);
+ return size;
+}
+
+/*
+ * gs_recv_packet
+ *
+ * Called for each USB packet received. Reads the packet
+ * header and stuffs the data in the appropriate tty buffer.
+ * Returns 0 if successful, or a negative error number.
+ *
+ * Called during USB completion routine, on interrupt time.
+ *
+ * We assume that disconnect will not happen until all completion
+ * routines have completed, so we can assume that the dev_port
+ * array does not change during the lifetime of this function.
+ */
+static int gs_recv_packet(struct gs_dev *dev, char *packet, unsigned int size)
+{
+ unsigned int len;
+ struct gs_port *port;
+ int ret;
+
+ /* TEMPORARY -- only port 0 is supported right now */
+ port = dev->dev_port[0];
+
+ if (port == NULL) {
+ printk(KERN_ERR "gs_recv_packet: port=%d, NULL port pointer\n",
+ port->port_num);
+ return -EIO;
+ }
+
+ spin_lock(&port->port_lock);
+
+ if (port->port_open_count == 0) {
+ printk(KERN_ERR "gs_recv_packet: port=%d, port is closed\n",
+ port->port_num);
+ ret = -EIO;
+ goto exit;
+ }
+
+ if (port->port_tty == NULL) {
+ printk(KERN_ERR "gs_recv_packet: port=%d, NULL tty pointer\n",
+ port->port_num);
+ ret = -EIO;
+ goto exit;
+ }
+
+ if (port->port_tty->magic != TTY_MAGIC) {
+ printk(KERN_ERR "gs_recv_packet: port=%d, bad tty magic\n",
+ port->port_num);
+ ret = -EIO;
+ goto exit;
+ }
+
+ len = (unsigned int)(TTY_FLIPBUF_SIZE - port->port_tty->flip.count);
+ if (len < size)
+ size = len;
+
+ if (size > 0) {
+ memcpy(port->port_tty->flip.char_buf_ptr, packet, size);
+ port->port_tty->flip.char_buf_ptr += size;
+ port->port_tty->flip.count += size;
+ tty_flip_buffer_push(port->port_tty);
+ wake_up_interruptible(&port->port_tty->read_wait);
+ }
+
+ ret = 0;
+
+exit:
+ spin_unlock(&port->port_lock);
+ return ret;
+}
+
+/*
+* gs_read_complete
+*/
+static void gs_read_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ int ret;
+ struct gs_dev *dev = ep->driver_data;
+
+ if (dev == NULL) {
+ printk(KERN_ERR "gs_read_complete: NULL device pointer\n");
+ return;
+ }
+
+ switch(req->status) {
+ case 0:
+ /* normal completion */
+ gs_recv_packet(dev, req->buf, req->actual);
+requeue:
+ req->length = ep->maxpacket;
+ if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) {
+ printk(KERN_ERR
+ "gs_read_complete: cannot queue read request, ret=%d\n",
+ ret);
+ }
+ break;
+
+ case -ESHUTDOWN:
+ /* disconnect */
+ gs_debug("gs_read_complete: shutdown\n");
+ gs_free_req(ep, req);
+ break;
+
+ default:
+ /* unexpected */
+ printk(KERN_ERR
+ "gs_read_complete: unexpected status error, status=%d\n",
+ req->status);
+ goto requeue;
+ break;
+ }
+}
+
+/*
+* gs_write_complete
+*/
+static void gs_write_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ struct gs_dev *dev = ep->driver_data;
+ struct gs_req_entry *gs_req = req->context;
+
+ if (dev == NULL) {
+ printk(KERN_ERR "gs_write_complete: NULL device pointer\n");
+ return;
+ }
+
+ switch(req->status) {
+ case 0:
+ /* normal completion */
+requeue:
+ if (gs_req == NULL) {
+ printk(KERN_ERR
+ "gs_write_complete: NULL request pointer\n");
+ return;
+ }
+
+ spin_lock(&dev->dev_lock);
+ list_add(&gs_req->re_entry, &dev->dev_req_list);
+ spin_unlock(&dev->dev_lock);
+
+ gs_send(dev);
+
+ break;
+
+ case -ESHUTDOWN:
+ /* disconnect */
+ gs_debug("gs_write_complete: shutdown\n");
+ gs_free_req(ep, req);
+ break;
+
+ default:
+ printk(KERN_ERR
+ "gs_write_complete: unexpected status error, status=%d\n",
+ req->status);
+ goto requeue;
+ break;
+ }
+}
+
+/* Gadget Driver */
+
+/*
+ * gs_bind
+ *
+ * Called on module load. Allocates and initializes the device
+ * structure and a control request.
+ */
+static int gs_bind(struct usb_gadget *gadget)
+{
+ int ret;
+ struct usb_ep *ep;
+ struct gs_dev *dev;
+
+ /* device specific */
+ if (gadget_is_net2280(gadget)) {
+ gs_device_desc.bcdDevice =
+ __constant_cpu_to_le16(GS_VERSION_NUM|0x0001);
+ } else if (gadget_is_pxa(gadget)) {
+ gs_device_desc.bcdDevice =
+ __constant_cpu_to_le16(GS_VERSION_NUM|0x0002);
+ } else if (gadget_is_sh(gadget)) {
+ gs_device_desc.bcdDevice =
+ __constant_cpu_to_le16(GS_VERSION_NUM|0x0003);
+ /* sh doesn't support multiple interfaces or configs */
+ use_acm = 0;
+ } else if (gadget_is_sa1100(gadget)) {
+ gs_device_desc.bcdDevice =
+ __constant_cpu_to_le16(GS_VERSION_NUM|0x0004);
+ /* sa1100 doesn't support necessary endpoints */
+ use_acm = 0;
+ } else if (gadget_is_goku(gadget)) {
+ gs_device_desc.bcdDevice =
+ __constant_cpu_to_le16(GS_VERSION_NUM|0x0005);
+ } else if (gadget_is_mq11xx(gadget)) {
+ gs_device_desc.bcdDevice =
+ __constant_cpu_to_le16(GS_VERSION_NUM|0x0006);
+ } else if (gadget_is_omap(gadget)) {
+ gs_device_desc.bcdDevice =
+ __constant_cpu_to_le16(GS_VERSION_NUM|0x0007);
+ } else if (gadget_is_lh7a40x(gadget)) {
+ gs_device_desc.bcdDevice =
+ __constant_cpu_to_le16(GS_VERSION_NUM|0x0008);
+ } else if (gadget_is_n9604(gadget)) {
+ gs_device_desc.bcdDevice =
+ __constant_cpu_to_le16(GS_VERSION_NUM|0x0009);
+ } else if (gadget_is_pxa27x(gadget)) {
+ gs_device_desc.bcdDevice =
+ __constant_cpu_to_le16(GS_VERSION_NUM|0x0011);
+ } else if (gadget_is_s3c2410(gadget)) {
+ gs_device_desc.bcdDevice =
+ __constant_cpu_to_le16(GS_VERSION_NUM|0x0012);
+ } else if (gadget_is_at91(gadget)) {
+ gs_device_desc.bcdDevice =
+ __constant_cpu_to_le16(GS_VERSION_NUM|0x0013);
+ } else {
+ printk(KERN_WARNING "gs_bind: controller '%s' not recognized\n",
+ gadget->name);
+ /* unrecognized, but safe unless bulk is REALLY quirky */
+ gs_device_desc.bcdDevice =
+ __constant_cpu_to_le16(GS_VERSION_NUM|0x0099);
+ }
+
+ usb_ep_autoconfig_reset(gadget);
+
+ ep = usb_ep_autoconfig(gadget, &gs_fullspeed_in_desc);
+ if (!ep)
+ goto autoconf_fail;
+ EP_IN_NAME = ep->name;
+ ep->driver_data = ep; /* claim the endpoint */
+
+ ep = usb_ep_autoconfig(gadget, &gs_fullspeed_out_desc);
+ if (!ep)
+ goto autoconf_fail;
+ EP_OUT_NAME = ep->name;
+ ep->driver_data = ep; /* claim the endpoint */
+
+ if (use_acm) {
+ ep = usb_ep_autoconfig(gadget, &gs_fullspeed_notify_desc);
+ if (!ep) {
+ printk(KERN_ERR "gs_bind: cannot run ACM on %s\n", gadget->name);
+ goto autoconf_fail;
+ }
+ gs_device_desc.idProduct = __constant_cpu_to_le16(
+ GS_CDC_PRODUCT_ID),
+ EP_NOTIFY_NAME = ep->name;
+ ep->driver_data = ep; /* claim the endpoint */
+ }
+
+ gs_device_desc.bDeviceClass = use_acm
+ ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC;
+ gs_device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
+
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+ gs_qualifier_desc.bDeviceClass = use_acm
+ ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC;
+ /* assume ep0 uses the same packet size for both speeds */
+ gs_qualifier_desc.bMaxPacketSize0 = gs_device_desc.bMaxPacketSize0;
+ /* assume endpoints are dual-speed */
+ gs_highspeed_notify_desc.bEndpointAddress =
+ gs_fullspeed_notify_desc.bEndpointAddress;
+ gs_highspeed_in_desc.bEndpointAddress =
+ gs_fullspeed_in_desc.bEndpointAddress;
+ gs_highspeed_out_desc.bEndpointAddress =
+ gs_fullspeed_out_desc.bEndpointAddress;
+#endif /* CONFIG_USB_GADGET_DUALSPEED */
+
+ usb_gadget_set_selfpowered(gadget);
+
+ if (gadget->is_otg) {
+ gs_otg_descriptor.bmAttributes |= USB_OTG_HNP,
+ gs_bulk_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ gs_acm_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ }
+
+ gs_device = dev = kmalloc(sizeof(struct gs_dev), GFP_KERNEL);
+ if (dev == NULL)
+ return -ENOMEM;
+
+ snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s",
+ system_utsname.sysname, system_utsname.release,
+ gadget->name);
+
+ memset(dev, 0, sizeof(struct gs_dev));
+ dev->dev_gadget = gadget;
+ spin_lock_init(&dev->dev_lock);
+ INIT_LIST_HEAD(&dev->dev_req_list);
+ set_gadget_data(gadget, dev);
+
+ if ((ret=gs_alloc_ports(dev, GFP_KERNEL)) != 0) {
+ printk(KERN_ERR "gs_bind: cannot allocate ports\n");
+ gs_unbind(gadget);
+ return ret;
+ }
+
+ /* preallocate control response and buffer */
+ dev->dev_ctrl_req = gs_alloc_req(gadget->ep0, GS_MAX_DESC_LEN,
+ GFP_KERNEL);
+ if (dev->dev_ctrl_req == NULL) {
+ gs_unbind(gadget);
+ return -ENOMEM;
+ }
+ dev->dev_ctrl_req->complete = gs_setup_complete;
+
+ gadget->ep0->driver_data = dev;
+
+ printk(KERN_INFO "gs_bind: %s %s bound\n",
+ GS_LONG_NAME, GS_VERSION_STR);
+
+ return 0;
+
+autoconf_fail:
+ printk(KERN_ERR "gs_bind: cannot autoconfigure on %s\n", gadget->name);
+ return -ENODEV;
+}
+
+/*
+ * gs_unbind
+ *
+ * Called on module unload. Frees the control request and device
+ * structure.
+ */
+static void gs_unbind(struct usb_gadget *gadget)
+{
+ struct gs_dev *dev = get_gadget_data(gadget);
+
+ gs_device = NULL;
+
+ /* read/write requests already freed, only control request remains */
+ if (dev != NULL) {
+ if (dev->dev_ctrl_req != NULL) {
+ gs_free_req(gadget->ep0, dev->dev_ctrl_req);
+ dev->dev_ctrl_req = NULL;
+ }
+ gs_free_ports(dev);
+ kfree(dev);
+ set_gadget_data(gadget, NULL);
+ }
+
+ printk(KERN_INFO "gs_unbind: %s %s unbound\n", GS_LONG_NAME,
+ GS_VERSION_STR);
+}
+
+/*
+ * gs_setup
+ *
+ * Implements all the control endpoint functionality that's not
+ * handled in hardware or the hardware driver.
+ *
+ * Returns the size of the data sent to the host, or a negative
+ * error number.
+ */
+static int gs_setup(struct usb_gadget *gadget,
+ const struct usb_ctrlrequest *ctrl)
+{
+ int ret = -EOPNOTSUPP;
+ struct gs_dev *dev = get_gadget_data(gadget);
+ struct usb_request *req = dev->dev_ctrl_req;
+ u16 wIndex = ctrl->wIndex;
+ u16 wValue = ctrl->wValue;
+ u16 wLength = ctrl->wLength;
+
+ switch (ctrl->bRequestType & USB_TYPE_MASK) {
+ case USB_TYPE_STANDARD:
+ ret = gs_setup_standard(gadget,ctrl);
+ break;
+
+ case USB_TYPE_CLASS:
+ ret = gs_setup_class(gadget,ctrl);
+ break;
+
+ default:
+ printk(KERN_ERR "gs_setup: unknown request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ wValue, wIndex, wLength);
+ break;
+ }
+
+ /* respond with data transfer before status phase? */
+ if (ret >= 0) {
+ req->length = ret;
+ req->zero = ret < wLength
+ && (ret % gadget->ep0->maxpacket) == 0;
+ ret = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
+ if (ret < 0) {
+ printk(KERN_ERR "gs_setup: cannot queue response, ret=%d\n",
+ ret);
+ req->status = 0;
+ gs_setup_complete(gadget->ep0, req);
+ }
+ }
+
+ /* device either stalls (ret < 0) or reports success */
+ return ret;
+}
+
+static int gs_setup_standard(struct usb_gadget *gadget,
+ const struct usb_ctrlrequest *ctrl)
+{
+ int ret = -EOPNOTSUPP;
+ struct gs_dev *dev = get_gadget_data(gadget);
+ struct usb_request *req = dev->dev_ctrl_req;
+ u16 wIndex = ctrl->wIndex;
+ u16 wValue = ctrl->wValue;
+ u16 wLength = ctrl->wLength;
+
+ switch (ctrl->bRequest) {
+ case USB_REQ_GET_DESCRIPTOR:
+ if (ctrl->bRequestType != USB_DIR_IN)
+ break;
+
+ switch (wValue >> 8) {
+ case USB_DT_DEVICE:
+ ret = min(wLength,
+ (u16)sizeof(struct usb_device_descriptor));
+ memcpy(req->buf, &gs_device_desc, ret);
+ break;
+
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+ case USB_DT_DEVICE_QUALIFIER:
+ if (!gadget->is_dualspeed)
+ break;
+ ret = min(wLength,
+ (u16)sizeof(struct usb_qualifier_descriptor));
+ memcpy(req->buf, &gs_qualifier_desc, ret);
+ break;
+
+ case USB_DT_OTHER_SPEED_CONFIG:
+ if (!gadget->is_dualspeed)
+ break;
+ /* fall through */
+#endif /* CONFIG_USB_GADGET_DUALSPEED */
+ case USB_DT_CONFIG:
+ ret = gs_build_config_buf(req->buf, gadget->speed,
+ wValue >> 8, wValue & 0xff,
+ gadget->is_otg);
+ if (ret >= 0)
+ ret = min(wLength, (u16)ret);
+ break;
+
+ case USB_DT_STRING:
+ /* wIndex == language code. */
+ ret = usb_gadget_get_string(&gs_string_table,
+ wValue & 0xff, req->buf);
+ if (ret >= 0)
+ ret = min(wLength, (u16)ret);
+ break;
+ }
+ break;
+
+ case USB_REQ_SET_CONFIGURATION:
+ if (ctrl->bRequestType != 0)
+ break;
+ spin_lock(&dev->dev_lock);
+ ret = gs_set_config(dev, wValue);
+ spin_unlock(&dev->dev_lock);
+ break;
+
+ case USB_REQ_GET_CONFIGURATION:
+ if (ctrl->bRequestType != USB_DIR_IN)
+ break;
+ *(u8 *)req->buf = dev->dev_config;
+ ret = min(wLength, (u16)1);
+ break;
+
+ case USB_REQ_SET_INTERFACE:
+ if (ctrl->bRequestType != USB_RECIP_INTERFACE
+ || !dev->dev_config
+ || wIndex >= GS_MAX_NUM_INTERFACES)
+ break;
+ if (dev->dev_config == GS_BULK_CONFIG_ID
+ && wIndex != GS_BULK_INTERFACE_ID)
+ break;
+ /* no alternate interface settings */
+ if (wValue != 0)
+ break;
+ spin_lock(&dev->dev_lock);
+ /* PXA hardware partially handles SET_INTERFACE;
+ * we need to kluge around that interference. */
+ if (gadget_is_pxa(gadget)) {
+ ret = gs_set_config(dev, use_acm ?
+ GS_ACM_CONFIG_ID : GS_BULK_CONFIG_ID);
+ goto set_interface_done;
+ }
+ if (dev->dev_config != GS_BULK_CONFIG_ID
+ && wIndex == GS_CONTROL_INTERFACE_ID) {
+ if (dev->dev_notify_ep) {
+ usb_ep_disable(dev->dev_notify_ep);
+ usb_ep_enable(dev->dev_notify_ep, dev->dev_notify_ep_desc);
+ }
+ } else {
+ usb_ep_disable(dev->dev_in_ep);
+ usb_ep_disable(dev->dev_out_ep);
+ usb_ep_enable(dev->dev_in_ep, dev->dev_in_ep_desc);
+ usb_ep_enable(dev->dev_out_ep, dev->dev_out_ep_desc);
+ }
+ ret = 0;
+set_interface_done:
+ spin_unlock(&dev->dev_lock);
+ break;
+
+ case USB_REQ_GET_INTERFACE:
+ if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)
+ || dev->dev_config == GS_NO_CONFIG_ID)
+ break;
+ if (wIndex >= GS_MAX_NUM_INTERFACES
+ || (dev->dev_config == GS_BULK_CONFIG_ID
+ && wIndex != GS_BULK_INTERFACE_ID)) {
+ ret = -EDOM;
+ break;
+ }
+ /* no alternate interface settings */
+ *(u8 *)req->buf = 0;
+ ret = min(wLength, (u16)1);
+ break;
+
+ default:
+ printk(KERN_ERR "gs_setup: unknown standard request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ wValue, wIndex, wLength);
+ break;
+ }
+
+ return ret;
+}
+
+static int gs_setup_class(struct usb_gadget *gadget,
+ const struct usb_ctrlrequest *ctrl)
+{
+ int ret = -EOPNOTSUPP;
+ struct gs_dev *dev = get_gadget_data(gadget);
+ struct gs_port *port = dev->dev_port[0]; /* ACM only has one port */
+ struct usb_request *req = dev->dev_ctrl_req;
+ u16 wIndex = ctrl->wIndex;
+ u16 wValue = ctrl->wValue;
+ u16 wLength = ctrl->wLength;
+
+ switch (ctrl->bRequest) {
+ case USB_CDC_REQ_SET_LINE_CODING:
+ ret = min(wLength,
+ (u16)sizeof(struct usb_cdc_line_coding));
+ if (port) {
+ spin_lock(&port->port_lock);
+ memcpy(&port->port_line_coding, req->buf, ret);
+ spin_unlock(&port->port_lock);
+ }
+ break;
+
+ case USB_CDC_REQ_GET_LINE_CODING:
+ port = dev->dev_port[0]; /* ACM only has one port */
+ ret = min(wLength,
+ (u16)sizeof(struct usb_cdc_line_coding));
+ if (port) {
+ spin_lock(&port->port_lock);
+ memcpy(req->buf, &port->port_line_coding, ret);
+ spin_unlock(&port->port_lock);
+ }
+ break;
+
+ case USB_CDC_REQ_SET_CONTROL_LINE_STATE:
+ ret = 0;
+ break;
+
+ default:
+ printk(KERN_ERR "gs_setup: unknown class request, type=%02x, request=%02x, value=%04x, index=%04x, length=%d\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ wValue, wIndex, wLength);
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * gs_setup_complete
+ */
+static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req)
+{
+ if (req->status || req->actual != req->length) {
+ printk(KERN_ERR "gs_setup_complete: status error, status=%d, actual=%d, length=%d\n",
+ req->status, req->actual, req->length);
+ }
+}
+
+/*
+ * gs_disconnect
+ *
+ * Called when the device is disconnected. Frees the closed
+ * ports and disconnects open ports. Open ports will be freed
+ * on close. Then reallocates the ports for the next connection.
+ */
+static void gs_disconnect(struct usb_gadget *gadget)
+{
+ unsigned long flags;
+ struct gs_dev *dev = get_gadget_data(gadget);
+
+ spin_lock_irqsave(&dev->dev_lock, flags);
+
+ gs_reset_config(dev);
+
+ /* free closed ports and disconnect open ports */
+ /* (open ports will be freed when closed) */
+ gs_free_ports(dev);
+
+ /* re-allocate ports for the next connection */
+ if (gs_alloc_ports(dev, GFP_ATOMIC) != 0)
+ printk(KERN_ERR "gs_disconnect: cannot re-allocate ports\n");
+
+ spin_unlock_irqrestore(&dev->dev_lock, flags);
+
+ printk(KERN_INFO "gs_disconnect: %s disconnected\n", GS_LONG_NAME);
+}
+
+/*
+ * gs_set_config
+ *
+ * Configures the device by enabling device specific
+ * optimizations, setting up the endpoints, allocating
+ * read and write requests and queuing read requests.
+ *
+ * The device lock must be held when calling this function.
+ */
+static int gs_set_config(struct gs_dev *dev, unsigned config)
+{
+ int i;
+ int ret = 0;
+ struct usb_gadget *gadget = dev->dev_gadget;
+ struct usb_ep *ep;
+ struct usb_endpoint_descriptor *ep_desc;
+ struct usb_request *req;
+ struct gs_req_entry *req_entry;
+
+ if (dev == NULL) {
+ printk(KERN_ERR "gs_set_config: NULL device pointer\n");
+ return 0;
+ }
+
+ if (config == dev->dev_config)
+ return 0;
+
+ gs_reset_config(dev);
+
+ switch (config) {
+ case GS_NO_CONFIG_ID:
+ return 0;
+ case GS_BULK_CONFIG_ID:
+ if (use_acm)
+ return -EINVAL;
+ /* device specific optimizations */
+ if (gadget_is_net2280(gadget))
+ net2280_set_fifo_mode(gadget, 1);
+ break;
+ case GS_ACM_CONFIG_ID:
+ if (!use_acm)
+ return -EINVAL;
+ /* device specific optimizations */
+ if (gadget_is_net2280(gadget))
+ net2280_set_fifo_mode(gadget, 1);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ dev->dev_config = config;
+
+ gadget_for_each_ep(ep, gadget) {
+
+ if (EP_NOTIFY_NAME
+ && strcmp(ep->name, EP_NOTIFY_NAME) == 0) {
+ ep_desc = GS_SPEED_SELECT(
+ gadget->speed == USB_SPEED_HIGH,
+ &gs_highspeed_notify_desc,
+ &gs_fullspeed_notify_desc);
+ ret = usb_ep_enable(ep,ep_desc);
+ if (ret == 0) {
+ ep->driver_data = dev;
+ dev->dev_notify_ep = ep;
+ dev->dev_notify_ep_desc = ep_desc;
+ } else {
+ printk(KERN_ERR "gs_set_config: cannot enable notify endpoint %s, ret=%d\n",
+ ep->name, ret);
+ goto exit_reset_config;
+ }
+ }
+
+ else if (strcmp(ep->name, EP_IN_NAME) == 0) {
+ ep_desc = GS_SPEED_SELECT(
+ gadget->speed == USB_SPEED_HIGH,
+ &gs_highspeed_in_desc,
+ &gs_fullspeed_in_desc);
+ ret = usb_ep_enable(ep,ep_desc);
+ if (ret == 0) {
+ ep->driver_data = dev;
+ dev->dev_in_ep = ep;
+ dev->dev_in_ep_desc = ep_desc;
+ } else {
+ printk(KERN_ERR "gs_set_config: cannot enable in endpoint %s, ret=%d\n",
+ ep->name, ret);
+ goto exit_reset_config;
+ }
+ }
+
+ else if (strcmp(ep->name, EP_OUT_NAME) == 0) {
+ ep_desc = GS_SPEED_SELECT(
+ gadget->speed == USB_SPEED_HIGH,
+ &gs_highspeed_out_desc,
+ &gs_fullspeed_out_desc);
+ ret = usb_ep_enable(ep,ep_desc);
+ if (ret == 0) {
+ ep->driver_data = dev;
+ dev->dev_out_ep = ep;
+ dev->dev_out_ep_desc = ep_desc;
+ } else {
+ printk(KERN_ERR "gs_set_config: cannot enable out endpoint %s, ret=%d\n",
+ ep->name, ret);
+ goto exit_reset_config;
+ }
+ }
+
+ }
+
+ if (dev->dev_in_ep == NULL || dev->dev_out_ep == NULL
+ || (config != GS_BULK_CONFIG_ID && dev->dev_notify_ep == NULL)) {
+ printk(KERN_ERR "gs_set_config: cannot find endpoints\n");
+ ret = -ENODEV;
+ goto exit_reset_config;
+ }
+
+ /* allocate and queue read requests */
+ ep = dev->dev_out_ep;
+ for (i=0; i<read_q_size && ret == 0; i++) {
+ if ((req=gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC))) {
+ req->complete = gs_read_complete;
+ if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) {
+ printk(KERN_ERR "gs_set_config: cannot queue read request, ret=%d\n",
+ ret);
+ }
+ } else {
+ printk(KERN_ERR "gs_set_config: cannot allocate read requests\n");
+ ret = -ENOMEM;
+ goto exit_reset_config;
+ }
+ }
+
+ /* allocate write requests, and put on free list */
+ ep = dev->dev_in_ep;
+ for (i=0; i<write_q_size; i++) {
+ if ((req_entry=gs_alloc_req_entry(ep, ep->maxpacket, GFP_ATOMIC))) {
+ req_entry->re_req->complete = gs_write_complete;
+ list_add(&req_entry->re_entry, &dev->dev_req_list);
+ } else {
+ printk(KERN_ERR "gs_set_config: cannot allocate write requests\n");
+ ret = -ENOMEM;
+ goto exit_reset_config;
+ }
+ }
+
+ printk(KERN_INFO "gs_set_config: %s configured, %s speed %s config\n",
+ GS_LONG_NAME,
+ gadget->speed == USB_SPEED_HIGH ? "high" : "full",
+ config == GS_BULK_CONFIG_ID ? "BULK" : "CDC-ACM");
+
+ return 0;
+
+exit_reset_config:
+ gs_reset_config(dev);
+ return ret;
+}
+
+/*
+ * gs_reset_config
+ *
+ * Mark the device as not configured, disable all endpoints,
+ * which forces completion of pending I/O and frees queued
+ * requests, and free the remaining write requests on the
+ * free list.
+ *
+ * The device lock must be held when calling this function.
+ */
+static void gs_reset_config(struct gs_dev *dev)
+{
+ struct gs_req_entry *req_entry;
+
+ if (dev == NULL) {
+ printk(KERN_ERR "gs_reset_config: NULL device pointer\n");
+ return;
+ }
+
+ if (dev->dev_config == GS_NO_CONFIG_ID)
+ return;
+
+ dev->dev_config = GS_NO_CONFIG_ID;
+
+ /* free write requests on the free list */
+ while(!list_empty(&dev->dev_req_list)) {
+ req_entry = list_entry(dev->dev_req_list.next,
+ struct gs_req_entry, re_entry);
+ list_del(&req_entry->re_entry);
+ gs_free_req_entry(dev->dev_in_ep, req_entry);
+ }
+
+ /* disable endpoints, forcing completion of pending i/o; */
+ /* completion handlers free their requests in this case */
+ if (dev->dev_notify_ep) {
+ usb_ep_disable(dev->dev_notify_ep);
+ dev->dev_notify_ep = NULL;
+ }
+ if (dev->dev_in_ep) {
+ usb_ep_disable(dev->dev_in_ep);
+ dev->dev_in_ep = NULL;
+ }
+ if (dev->dev_out_ep) {
+ usb_ep_disable(dev->dev_out_ep);
+ dev->dev_out_ep = NULL;
+ }
+}
+
+/*
+ * gs_build_config_buf
+ *
+ * Builds the config descriptors in the given buffer and returns the
+ * length, or a negative error number.
+ */
+static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed,
+ u8 type, unsigned int index, int is_otg)
+{
+ int len;
+ int high_speed;
+ const struct usb_config_descriptor *config_desc;
+ const struct usb_descriptor_header **function;
+
+ if (index >= gs_device_desc.bNumConfigurations)
+ return -EINVAL;
+
+ /* other speed switches high and full speed */
+ high_speed = (speed == USB_SPEED_HIGH);
+ if (type == USB_DT_OTHER_SPEED_CONFIG)
+ high_speed = !high_speed;
+
+ if (use_acm) {
+ config_desc = &gs_acm_config_desc;
+ function = GS_SPEED_SELECT(high_speed,
+ gs_acm_highspeed_function,
+ gs_acm_fullspeed_function);
+ } else {
+ config_desc = &gs_bulk_config_desc;
+ function = GS_SPEED_SELECT(high_speed,
+ gs_bulk_highspeed_function,
+ gs_bulk_fullspeed_function);
+ }
+
+ /* for now, don't advertise srp-only devices */
+ if (!is_otg)
+ function++;
+
+ len = usb_gadget_config_buf(config_desc, buf, GS_MAX_DESC_LEN, function);
+ if (len < 0)
+ return len;
+
+ ((struct usb_config_descriptor *)buf)->bDescriptorType = type;
+
+ return len;
+}
+
+/*
+ * gs_alloc_req
+ *
+ * Allocate a usb_request and its buffer. Returns a pointer to the
+ * usb_request or NULL if there is an error.
+ */
+static struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned int len, int kmalloc_flags)
+{
+ struct usb_request *req;
+
+ if (ep == NULL)
+ return NULL;
+
+ req = usb_ep_alloc_request(ep, kmalloc_flags);
+
+ if (req != NULL) {
+ req->length = len;
+ req->buf = kmalloc(len, kmalloc_flags);
+ if (req->buf == NULL) {
+ usb_ep_free_request(ep, req);
+ return NULL;
+ }
+ }
+
+ return req;
+}
+
+/*
+ * gs_free_req
+ *
+ * Free a usb_request and its buffer.
+ */
+static void gs_free_req(struct usb_ep *ep, struct usb_request *req)
+{
+ if (ep != NULL && req != NULL) {
+ kfree(req->buf);
+ usb_ep_free_request(ep, req);
+ }
+}
+
+/*
+ * gs_alloc_req_entry
+ *
+ * Allocates a request and its buffer, using the given
+ * endpoint, buffer len, and kmalloc flags.
+ */
+static struct gs_req_entry *gs_alloc_req_entry(struct usb_ep *ep, unsigned len, int kmalloc_flags)
+{
+ struct gs_req_entry *req;
+
+ req = kmalloc(sizeof(struct gs_req_entry), kmalloc_flags);
+ if (req == NULL)
+ return NULL;
+
+ req->re_req = gs_alloc_req(ep, len, kmalloc_flags);
+ if (req->re_req == NULL) {
+ kfree(req);
+ return NULL;
+ }
+
+ req->re_req->context = req;
+
+ return req;
+}
+
+/*
+ * gs_free_req_entry
+ *
+ * Frees a request and its buffer.
+ */
+static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req)
+{
+ if (ep != NULL && req != NULL) {
+ if (req->re_req != NULL)
+ gs_free_req(ep, req->re_req);
+ kfree(req);
+ }
+}
+
+/*
+ * gs_alloc_ports
+ *
+ * Allocate all ports and set the gs_dev struct to point to them.
+ * Return 0 if successful, or a negative error number.
+ *
+ * The device lock is normally held when calling this function.
+ */
+static int gs_alloc_ports(struct gs_dev *dev, int kmalloc_flags)
+{
+ int i;
+ struct gs_port *port;
+
+ if (dev == NULL)
+ return -EIO;
+
+ for (i=0; i<GS_NUM_PORTS; i++) {
+ if ((port=(struct gs_port *)kmalloc(sizeof(struct gs_port), kmalloc_flags)) == NULL)
+ return -ENOMEM;
+
+ memset(port, 0, sizeof(struct gs_port));
+ port->port_dev = dev;
+ port->port_num = i;
+ port->port_line_coding.dwDTERate = cpu_to_le32(GS_DEFAULT_DTE_RATE);
+ port->port_line_coding.bCharFormat = GS_DEFAULT_CHAR_FORMAT;
+ port->port_line_coding.bParityType = GS_DEFAULT_PARITY;
+ port->port_line_coding.bDataBits = GS_DEFAULT_DATA_BITS;
+ spin_lock_init(&port->port_lock);
+ init_waitqueue_head(&port->port_write_wait);
+
+ dev->dev_port[i] = port;
+ }
+
+ return 0;
+}
+
+/*
+ * gs_free_ports
+ *
+ * Free all closed ports. Open ports are disconnected by
+ * freeing their write buffers, setting their device pointers
+ * and the pointers to them in the device to NULL. These
+ * ports will be freed when closed.
+ *
+ * The device lock is normally held when calling this function.
+ */
+static void gs_free_ports(struct gs_dev *dev)
+{
+ int i;
+ unsigned long flags;
+ struct gs_port *port;
+
+ if (dev == NULL)
+ return;
+
+ for (i=0; i<GS_NUM_PORTS; i++) {
+ if ((port=dev->dev_port[i]) != NULL) {
+ dev->dev_port[i] = NULL;
+
+ spin_lock_irqsave(&port->port_lock, flags);
+
+ if (port->port_write_buf != NULL) {
+ gs_buf_free(port->port_write_buf);
+ port->port_write_buf = NULL;
+ }
+
+ if (port->port_open_count > 0 || port->port_in_use) {
+ port->port_dev = NULL;
+ wake_up_interruptible(&port->port_write_wait);
+ if (port->port_tty) {
+ wake_up_interruptible(&port->port_tty->read_wait);
+ wake_up_interruptible(&port->port_tty->write_wait);
+ }
+ spin_unlock_irqrestore(&port->port_lock, flags);
+ } else {
+ spin_unlock_irqrestore(&port->port_lock, flags);
+ kfree(port);
+ }
+
+ }
+ }
+}
+
+/* Circular Buffer */
+
+/*
+ * gs_buf_alloc
+ *
+ * Allocate a circular buffer and all associated memory.
+ */
+static struct gs_buf *gs_buf_alloc(unsigned int size, int kmalloc_flags)
+{
+ struct gs_buf *gb;
+
+ if (size == 0)
+ return NULL;
+
+ gb = (struct gs_buf *)kmalloc(sizeof(struct gs_buf), kmalloc_flags);
+ if (gb == NULL)
+ return NULL;
+
+ gb->buf_buf = kmalloc(size, kmalloc_flags);
+ if (gb->buf_buf == NULL) {
+ kfree(gb);
+ return NULL;
+ }
+
+ gb->buf_size = size;
+ gb->buf_get = gb->buf_put = gb->buf_buf;
+
+ return gb;
+}
+
+/*
+ * gs_buf_free
+ *
+ * Free the buffer and all associated memory.
+ */
+void gs_buf_free(struct gs_buf *gb)
+{
+ if (gb != NULL) {
+ if (gb->buf_buf != NULL)
+ kfree(gb->buf_buf);
+ kfree(gb);
+ }
+}
+
+/*
+ * gs_buf_clear
+ *
+ * Clear out all data in the circular buffer.
+ */
+void gs_buf_clear(struct gs_buf *gb)
+{
+ if (gb != NULL)
+ gb->buf_get = gb->buf_put;
+ /* equivalent to a get of all data available */
+}
+
+/*
+ * gs_buf_data_avail
+ *
+ * Return the number of bytes of data available in the circular
+ * buffer.
+ */
+unsigned int gs_buf_data_avail(struct gs_buf *gb)
+{
+ if (gb != NULL)
+ return (gb->buf_size + gb->buf_put - gb->buf_get) % gb->buf_size;
+ else
+ return 0;
+}
+
+/*
+ * gs_buf_space_avail
+ *
+ * Return the number of bytes of space available in the circular
+ * buffer.
+ */
+unsigned int gs_buf_space_avail(struct gs_buf *gb)
+{
+ if (gb != NULL)
+ return (gb->buf_size + gb->buf_get - gb->buf_put - 1) % gb->buf_size;
+ else
+ return 0;
+}
+
+/*
+ * gs_buf_put
+ *
+ * Copy data data from a user buffer and put it into the circular buffer.
+ * Restrict to the amount of space available.
+ *
+ * Return the number of bytes copied.
+ */
+unsigned int gs_buf_put(struct gs_buf *gb, const char *buf, unsigned int count)
+{
+ unsigned int len;
+
+ if (gb == NULL)
+ return 0;
+
+ len = gs_buf_space_avail(gb);
+ if (count > len)
+ count = len;
+
+ if (count == 0)
+ return 0;
+
+ len = gb->buf_buf + gb->buf_size - gb->buf_put;
+ if (count > len) {
+ memcpy(gb->buf_put, buf, len);
+ memcpy(gb->buf_buf, buf+len, count - len);
+ gb->buf_put = gb->buf_buf + count - len;
+ } else {
+ memcpy(gb->buf_put, buf, count);
+ if (count < len)
+ gb->buf_put += count;
+ else /* count == len */
+ gb->buf_put = gb->buf_buf;
+ }
+
+ return count;
+}
+
+/*
+ * gs_buf_get
+ *
+ * Get data from the circular buffer and copy to the given buffer.
+ * Restrict to the amount of data available.
+ *
+ * Return the number of bytes copied.
+ */
+unsigned int gs_buf_get(struct gs_buf *gb, char *buf, unsigned int count)
+{
+ unsigned int len;
+
+ if (gb == NULL)
+ return 0;
+
+ len = gs_buf_data_avail(gb);
+ if (count > len)
+ count = len;
+
+ if (count == 0)
+ return 0;
+
+ len = gb->buf_buf + gb->buf_size - gb->buf_get;
+ if (count > len) {
+ memcpy(buf, gb->buf_get, len);
+ memcpy(buf+len, gb->buf_buf, count - len);
+ gb->buf_get = gb->buf_buf + count - len;
+ } else {
+ memcpy(buf, gb->buf_get, count);
+ if (count < len)
+ gb->buf_get += count;
+ else /* count == len */
+ gb->buf_get = gb->buf_buf;
+ }
+
+ return count;
+}
diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c
new file mode 100644
index 00000000000..b1735767660
--- /dev/null
+++ b/drivers/usb/gadget/usbstring.c
@@ -0,0 +1,136 @@
+/*
+ * Copyright (C) 2003 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published
+ * by the Free Software Foundation; either version 2.1 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/string.h>
+#include <linux/device.h>
+#include <linux/init.h>
+
+#include <linux/usb_ch9.h>
+#include <linux/usb_gadget.h>
+
+#include <asm/unaligned.h>
+
+
+static int utf8_to_utf16le(const char *s, __le16 *cp, unsigned len)
+{
+ int count = 0;
+ u8 c;
+ u16 uchar;
+
+ /* this insists on correct encodings, though not minimal ones.
+ * BUT it currently rejects legit 4-byte UTF-8 code points,
+ * which need surrogate pairs. (Unicode 3.1 can use them.)
+ */
+ while (len != 0 && (c = (u8) *s++) != 0) {
+ if (unlikely(c & 0x80)) {
+ // 2-byte sequence:
+ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
+ if ((c & 0xe0) == 0xc0) {
+ uchar = (c & 0x1f) << 6;
+
+ c = (u8) *s++;
+ if ((c & 0xc0) != 0xc0)
+ goto fail;
+ c &= 0x3f;
+ uchar |= c;
+
+ // 3-byte sequence (most CJKV characters):
+ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
+ } else if ((c & 0xf0) == 0xe0) {
+ uchar = (c & 0x0f) << 12;
+
+ c = (u8) *s++;
+ if ((c & 0xc0) != 0xc0)
+ goto fail;
+ c &= 0x3f;
+ uchar |= c << 6;
+
+ c = (u8) *s++;
+ if ((c & 0xc0) != 0xc0)
+ goto fail;
+ c &= 0x3f;
+ uchar |= c;
+
+ /* no bogus surrogates */
+ if (0xd800 <= uchar && uchar <= 0xdfff)
+ goto fail;
+
+ // 4-byte sequence (surrogate pairs, currently rare):
+ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx
+ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx
+ // (uuuuu = wwww + 1)
+ // FIXME accept the surrogate code points (only)
+
+ } else
+ goto fail;
+ } else
+ uchar = c;
+ put_unaligned (cpu_to_le16 (uchar), cp++);
+ count++;
+ len--;
+ }
+ return count;
+fail:
+ return -1;
+}
+
+
+/**
+ * usb_gadget_get_string - fill out a string descriptor
+ * @table: of c strings encoded using UTF-8
+ * @id: string id, from low byte of wValue in get string descriptor
+ * @buf: at least 256 bytes
+ *
+ * Finds the UTF-8 string matching the ID, and converts it into a
+ * string descriptor in utf16-le.
+ * Returns length of descriptor (always even) or negative errno
+ *
+ * If your driver needs stings in multiple languages, you'll probably
+ * "switch (wIndex) { ... }" in your ep0 string descriptor logic,
+ * using this routine after choosing which set of UTF-8 strings to use.
+ * Note that US-ASCII is a strict subset of UTF-8; any string bytes with
+ * the eighth bit set will be multibyte UTF-8 characters, not ISO-8859/1
+ * characters (which are also widely used in C strings).
+ */
+int
+usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf)
+{
+ struct usb_string *s;
+ int len;
+
+ /* descriptor 0 has the language id */
+ if (id == 0) {
+ buf [0] = 4;
+ buf [1] = USB_DT_STRING;
+ buf [2] = (u8) table->language;
+ buf [3] = (u8) (table->language >> 8);
+ return 4;
+ }
+ for (s = table->strings; s && s->s; s++)
+ if (s->id == id)
+ break;
+
+ /* unrecognized: stall. */
+ if (!s || !s->s)
+ return -EINVAL;
+
+ /* string descriptors have length, tag, then UTF16-LE text */
+ len = min ((size_t) 126, strlen (s->s));
+ memset (buf + 2, 0, 2 * len); /* zero all the bytes */
+ len = utf8_to_utf16le(s->s, (__le16 *)&buf[2], len);
+ if (len < 0)
+ return -EINVAL;
+ buf [0] = (len + 1) * 2;
+ buf [1] = USB_DT_STRING;
+ return buf [0];
+}
+
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
new file mode 100644
index 00000000000..6e49432071a
--- /dev/null
+++ b/drivers/usb/gadget/zero.c
@@ -0,0 +1,1357 @@
+/*
+ * zero.c -- Gadget Zero, for USB development
+ *
+ * Copyright (C) 2003-2004 David Brownell
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ * to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+/*
+ * Gadget Zero only needs two bulk endpoints, and is an example of how you
+ * can write a hardware-agnostic gadget driver running inside a USB device.
+ *
+ * Hardware details are visible (see CONFIG_USB_ZERO_* below) but don't
+ * affect most of the driver.
+ *
+ * Use it with the Linux host/master side "usbtest" driver to get a basic
+ * functional test of your device-side usb stack, or with "usb-skeleton".
+ *
+ * It supports two similar configurations. One sinks whatever the usb host
+ * writes, and in return sources zeroes. The other loops whatever the host
+ * writes back, so the host can read it. Module options include:
+ *
+ * buflen=N default N=4096, buffer size used
+ * qlen=N default N=32, how many buffers in the loopback queue
+ * loopdefault default false, list loopback config first
+ *
+ * Many drivers will only have one configuration, letting them be much
+ * simpler if they also don't support high speed operation (like this
+ * driver does).
+ */
+
+#define DEBUG 1
+// #define VERBOSE
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/utsname.h>
+#include <linux/device.h>
+#include <linux/moduleparam.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/unaligned.h>
+
+#include <linux/usb_ch9.h>
+#include <linux/usb_gadget.h>
+
+#include "gadget_chips.h"
+
+
+/*-------------------------------------------------------------------------*/
+
+#define DRIVER_VERSION "St Patrick's Day 2004"
+
+static const char shortname [] = "zero";
+static const char longname [] = "Gadget Zero";
+
+static const char source_sink [] = "source and sink data";
+static const char loopback [] = "loop input to output";
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * driver assumes self-powered hardware, and
+ * has no way for users to trigger remote wakeup.
+ *
+ * this version autoconfigures as much as possible,
+ * which is reasonable for most "bulk-only" drivers.
+ */
+static const char *EP_IN_NAME; /* source */
+static const char *EP_OUT_NAME; /* sink */
+
+/*-------------------------------------------------------------------------*/
+
+/* big enough to hold our biggest descriptor */
+#define USB_BUFSIZ 256
+
+struct zero_dev {
+ spinlock_t lock;
+ struct usb_gadget *gadget;
+ struct usb_request *req; /* for control responses */
+
+ /* when configured, we have one of two configs:
+ * - source data (in to host) and sink it (out from host)
+ * - or loop it back (out from host back in to host)
+ */
+ u8 config;
+ struct usb_ep *in_ep, *out_ep;
+
+ /* autoresume timer */
+ struct timer_list resume;
+};
+
+#define xprintk(d,level,fmt,args...) \
+ dev_printk(level , &(d)->gadget->dev , fmt , ## args)
+
+#ifdef DEBUG
+#define DBG(dev,fmt,args...) \
+ xprintk(dev , KERN_DEBUG , fmt , ## args)
+#else
+#define DBG(dev,fmt,args...) \
+ do { } while (0)
+#endif /* DEBUG */
+
+#ifdef VERBOSE
+#define VDBG DBG
+#else
+#define VDBG(dev,fmt,args...) \
+ do { } while (0)
+#endif /* VERBOSE */
+
+#define ERROR(dev,fmt,args...) \
+ xprintk(dev , KERN_ERR , fmt , ## args)
+#define WARN(dev,fmt,args...) \
+ xprintk(dev , KERN_WARNING , fmt , ## args)
+#define INFO(dev,fmt,args...) \
+ xprintk(dev , KERN_INFO , fmt , ## args)
+
+/*-------------------------------------------------------------------------*/
+
+static unsigned buflen = 4096;
+static unsigned qlen = 32;
+static unsigned pattern = 0;
+
+module_param (buflen, uint, S_IRUGO|S_IWUSR);
+module_param (qlen, uint, S_IRUGO|S_IWUSR);
+module_param (pattern, uint, S_IRUGO|S_IWUSR);
+
+/*
+ * if it's nonzero, autoresume says how many seconds to wait
+ * before trying to wake up the host after suspend.
+ */
+static unsigned autoresume = 0;
+module_param (autoresume, uint, 0);
+
+/*
+ * Normally the "loopback" configuration is second (index 1) so
+ * it's not the default. Here's where to change that order, to
+ * work better with hosts where config changes are problematic.
+ * Or controllers (like superh) that only support one config.
+ */
+static int loopdefault = 0;
+
+module_param (loopdefault, bool, S_IRUGO|S_IWUSR);
+
+/*-------------------------------------------------------------------------*/
+
+/* Thanks to NetChip Technologies for donating this product ID.
+ *
+ * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
+ * Instead: allocate your own, using normal USB-IF procedures.
+ */
+#ifndef CONFIG_USB_ZERO_HNPTEST
+#define DRIVER_VENDOR_NUM 0x0525 /* NetChip */
+#define DRIVER_PRODUCT_NUM 0xa4a0 /* Linux-USB "Gadget Zero" */
+#else
+#define DRIVER_VENDOR_NUM 0x1a0a /* OTG test device IDs */
+#define DRIVER_PRODUCT_NUM 0xbadd
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * DESCRIPTORS ... most are static, but strings and (full)
+ * configuration descriptors are built on demand.
+ */
+
+#define STRING_MANUFACTURER 25
+#define STRING_PRODUCT 42
+#define STRING_SERIAL 101
+#define STRING_SOURCE_SINK 250
+#define STRING_LOOPBACK 251
+
+/*
+ * This device advertises two configurations; these numbers work
+ * on a pxa250 as well as more flexible hardware.
+ */
+#define CONFIG_SOURCE_SINK 3
+#define CONFIG_LOOPBACK 2
+
+static struct usb_device_descriptor
+device_desc = {
+ .bLength = sizeof device_desc,
+ .bDescriptorType = USB_DT_DEVICE,
+
+ .bcdUSB = __constant_cpu_to_le16 (0x0200),
+ .bDeviceClass = USB_CLASS_VENDOR_SPEC,
+
+ .idVendor = __constant_cpu_to_le16 (DRIVER_VENDOR_NUM),
+ .idProduct = __constant_cpu_to_le16 (DRIVER_PRODUCT_NUM),
+ .iManufacturer = STRING_MANUFACTURER,
+ .iProduct = STRING_PRODUCT,
+ .iSerialNumber = STRING_SERIAL,
+ .bNumConfigurations = 2,
+};
+
+static struct usb_config_descriptor
+source_sink_config = {
+ .bLength = sizeof source_sink_config,
+ .bDescriptorType = USB_DT_CONFIG,
+
+ /* compute wTotalLength on the fly */
+ .bNumInterfaces = 1,
+ .bConfigurationValue = CONFIG_SOURCE_SINK,
+ .iConfiguration = STRING_SOURCE_SINK,
+ .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
+ .bMaxPower = 1, /* self-powered */
+};
+
+static struct usb_config_descriptor
+loopback_config = {
+ .bLength = sizeof loopback_config,
+ .bDescriptorType = USB_DT_CONFIG,
+
+ /* compute wTotalLength on the fly */
+ .bNumInterfaces = 1,
+ .bConfigurationValue = CONFIG_LOOPBACK,
+ .iConfiguration = STRING_LOOPBACK,
+ .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
+ .bMaxPower = 1, /* self-powered */
+};
+
+static struct usb_otg_descriptor
+otg_descriptor = {
+ .bLength = sizeof otg_descriptor,
+ .bDescriptorType = USB_DT_OTG,
+
+ .bmAttributes = USB_OTG_SRP,
+};
+
+/* one interface in each configuration */
+
+static const struct usb_interface_descriptor
+source_sink_intf = {
+ .bLength = sizeof source_sink_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+ .bNumEndpoints = 2,
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
+ .iInterface = STRING_SOURCE_SINK,
+};
+
+static const struct usb_interface_descriptor
+loopback_intf = {
+ .bLength = sizeof loopback_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+ .bNumEndpoints = 2,
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
+ .iInterface = STRING_LOOPBACK,
+};
+
+/* two full speed bulk endpoints; their use is config-dependent */
+
+static struct usb_endpoint_descriptor
+fs_source_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor
+fs_sink_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static const struct usb_descriptor_header *fs_source_sink_function [] = {
+ (struct usb_descriptor_header *) &otg_descriptor,
+ (struct usb_descriptor_header *) &source_sink_intf,
+ (struct usb_descriptor_header *) &fs_sink_desc,
+ (struct usb_descriptor_header *) &fs_source_desc,
+ NULL,
+};
+
+static const struct usb_descriptor_header *fs_loopback_function [] = {
+ (struct usb_descriptor_header *) &otg_descriptor,
+ (struct usb_descriptor_header *) &loopback_intf,
+ (struct usb_descriptor_header *) &fs_sink_desc,
+ (struct usb_descriptor_header *) &fs_source_desc,
+ NULL,
+};
+
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+
+/*
+ * usb 2.0 devices need to expose both high speed and full speed
+ * descriptors, unless they only run at full speed.
+ *
+ * that means alternate endpoint descriptors (bigger packets)
+ * and a "device qualifier" ... plus more construction options
+ * for the config descriptor.
+ */
+
+static struct usb_endpoint_descriptor
+hs_source_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16 (512),
+};
+
+static struct usb_endpoint_descriptor
+hs_sink_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16 (512),
+};
+
+static struct usb_qualifier_descriptor
+dev_qualifier = {
+ .bLength = sizeof dev_qualifier,
+ .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
+
+ .bcdUSB = __constant_cpu_to_le16 (0x0200),
+ .bDeviceClass = USB_CLASS_VENDOR_SPEC,
+
+ .bNumConfigurations = 2,
+};
+
+static const struct usb_descriptor_header *hs_source_sink_function [] = {
+ (struct usb_descriptor_header *) &otg_descriptor,
+ (struct usb_descriptor_header *) &source_sink_intf,
+ (struct usb_descriptor_header *) &hs_source_desc,
+ (struct usb_descriptor_header *) &hs_sink_desc,
+ NULL,
+};
+
+static const struct usb_descriptor_header *hs_loopback_function [] = {
+ (struct usb_descriptor_header *) &otg_descriptor,
+ (struct usb_descriptor_header *) &loopback_intf,
+ (struct usb_descriptor_header *) &hs_source_desc,
+ (struct usb_descriptor_header *) &hs_sink_desc,
+ NULL,
+};
+
+/* maxpacket and other transfer characteristics vary by speed. */
+#define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs))
+
+#else
+
+/* if there's no high speed support, maxpacket doesn't change. */
+#define ep_desc(g,hs,fs) fs
+
+#endif /* !CONFIG_USB_GADGET_DUALSPEED */
+
+static char manufacturer [50];
+static char serial [40];
+
+/* static strings, in UTF-8 */
+static struct usb_string strings [] = {
+ { STRING_MANUFACTURER, manufacturer, },
+ { STRING_PRODUCT, longname, },
+ { STRING_SERIAL, serial, },
+ { STRING_LOOPBACK, loopback, },
+ { STRING_SOURCE_SINK, source_sink, },
+ { } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab = {
+ .language = 0x0409, /* en-us */
+ .strings = strings,
+};
+
+/*
+ * config descriptors are also handcrafted. these must agree with code
+ * that sets configurations, and with code managing interfaces and their
+ * altsettings. other complexity may come from:
+ *
+ * - high speed support, including "other speed config" rules
+ * - multiple configurations
+ * - interfaces with alternate settings
+ * - embedded class or vendor-specific descriptors
+ *
+ * this handles high speed, and has a second config that could as easily
+ * have been an alternate interface setting (on most hardware).
+ *
+ * NOTE: to demonstrate (and test) more USB capabilities, this driver
+ * should include an altsetting to test interrupt transfers, including
+ * high bandwidth modes at high speed. (Maybe work like Intel's test
+ * device?)
+ */
+static int
+config_buf (struct usb_gadget *gadget,
+ u8 *buf, u8 type, unsigned index)
+{
+ int is_source_sink;
+ int len;
+ const struct usb_descriptor_header **function;
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+ int hs = (gadget->speed == USB_SPEED_HIGH);
+#endif
+
+ /* two configurations will always be index 0 and index 1 */
+ if (index > 1)
+ return -EINVAL;
+ is_source_sink = loopdefault ? (index == 1) : (index == 0);
+
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+ if (type == USB_DT_OTHER_SPEED_CONFIG)
+ hs = !hs;
+ if (hs)
+ function = is_source_sink
+ ? hs_source_sink_function
+ : hs_loopback_function;
+ else
+#endif
+ function = is_source_sink
+ ? fs_source_sink_function
+ : fs_loopback_function;
+
+ /* for now, don't advertise srp-only devices */
+ if (!gadget->is_otg)
+ function++;
+
+ len = usb_gadget_config_buf (is_source_sink
+ ? &source_sink_config
+ : &loopback_config,
+ buf, USB_BUFSIZ, function);
+ if (len < 0)
+ return len;
+ ((struct usb_config_descriptor *) buf)->bDescriptorType = type;
+ return len;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_request *
+alloc_ep_req (struct usb_ep *ep, unsigned length)
+{
+ struct usb_request *req;
+
+ req = usb_ep_alloc_request (ep, GFP_ATOMIC);
+ if (req) {
+ req->length = length;
+ req->buf = usb_ep_alloc_buffer (ep, length,
+ &req->dma, GFP_ATOMIC);
+ if (!req->buf) {
+ usb_ep_free_request (ep, req);
+ req = NULL;
+ }
+ }
+ return req;
+}
+
+static void free_ep_req (struct usb_ep *ep, struct usb_request *req)
+{
+ if (req->buf)
+ usb_ep_free_buffer (ep, req->buf, req->dma, req->length);
+ usb_ep_free_request (ep, req);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* optionally require specific source/sink data patterns */
+
+static int
+check_read_data (
+ struct zero_dev *dev,
+ struct usb_ep *ep,
+ struct usb_request *req
+)
+{
+ unsigned i;
+ u8 *buf = req->buf;
+
+ for (i = 0; i < req->actual; i++, buf++) {
+ switch (pattern) {
+ /* all-zeroes has no synchronization issues */
+ case 0:
+ if (*buf == 0)
+ continue;
+ break;
+ /* mod63 stays in sync with short-terminated transfers,
+ * or otherwise when host and gadget agree on how large
+ * each usb transfer request should be. resync is done
+ * with set_interface or set_config.
+ */
+ case 1:
+ if (*buf == (u8)(i % 63))
+ continue;
+ break;
+ }
+ ERROR (dev, "bad OUT byte, buf [%d] = %d\n", i, *buf);
+ usb_ep_set_halt (ep);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void
+reinit_write_data (
+ struct zero_dev *dev,
+ struct usb_ep *ep,
+ struct usb_request *req
+)
+{
+ unsigned i;
+ u8 *buf = req->buf;
+
+ switch (pattern) {
+ case 0:
+ memset (req->buf, 0, req->length);
+ break;
+ case 1:
+ for (i = 0; i < req->length; i++)
+ *buf++ = (u8) (i % 63);
+ break;
+ }
+}
+
+/* if there is only one request in the queue, there'll always be an
+ * irq delay between end of one request and start of the next.
+ * that prevents using hardware dma queues.
+ */
+static void source_sink_complete (struct usb_ep *ep, struct usb_request *req)
+{
+ struct zero_dev *dev = ep->driver_data;
+ int status = req->status;
+
+ switch (status) {
+
+ case 0: /* normal completion? */
+ if (ep == dev->out_ep)
+ check_read_data (dev, ep, req);
+ else
+ reinit_write_data (dev, ep, req);
+ break;
+
+ /* this endpoint is normally active while we're configured */
+ case -ECONNABORTED: /* hardware forced ep reset */
+ case -ECONNRESET: /* request dequeued */
+ case -ESHUTDOWN: /* disconnect from host */
+ VDBG (dev, "%s gone (%d), %d/%d\n", ep->name, status,
+ req->actual, req->length);
+ if (ep == dev->out_ep)
+ check_read_data (dev, ep, req);
+ free_ep_req (ep, req);
+ return;
+
+ case -EOVERFLOW: /* buffer overrun on read means that
+ * we didn't provide a big enough
+ * buffer.
+ */
+ default:
+#if 1
+ DBG (dev, "%s complete --> %d, %d/%d\n", ep->name,
+ status, req->actual, req->length);
+#endif
+ case -EREMOTEIO: /* short read */
+ break;
+ }
+
+ status = usb_ep_queue (ep, req, GFP_ATOMIC);
+ if (status) {
+ ERROR (dev, "kill %s: resubmit %d bytes --> %d\n",
+ ep->name, req->length, status);
+ usb_ep_set_halt (ep);
+ /* FIXME recover later ... somehow */
+ }
+}
+
+static struct usb_request *
+source_sink_start_ep (struct usb_ep *ep, int gfp_flags)
+{
+ struct usb_request *req;
+ int status;
+
+ req = alloc_ep_req (ep, buflen);
+ if (!req)
+ return NULL;
+
+ memset (req->buf, 0, req->length);
+ req->complete = source_sink_complete;
+
+ if (strcmp (ep->name, EP_IN_NAME) == 0)
+ reinit_write_data (ep->driver_data, ep, req);
+
+ status = usb_ep_queue (ep, req, gfp_flags);
+ if (status) {
+ struct zero_dev *dev = ep->driver_data;
+
+ ERROR (dev, "start %s --> %d\n", ep->name, status);
+ free_ep_req (ep, req);
+ req = NULL;
+ }
+
+ return req;
+}
+
+static int
+set_source_sink_config (struct zero_dev *dev, int gfp_flags)
+{
+ int result = 0;
+ struct usb_ep *ep;
+ struct usb_gadget *gadget = dev->gadget;
+
+ gadget_for_each_ep (ep, gadget) {
+ const struct usb_endpoint_descriptor *d;
+
+ /* one endpoint writes (sources) zeroes in (to the host) */
+ if (strcmp (ep->name, EP_IN_NAME) == 0) {
+ d = ep_desc (gadget, &hs_source_desc, &fs_source_desc);
+ result = usb_ep_enable (ep, d);
+ if (result == 0) {
+ ep->driver_data = dev;
+ if (source_sink_start_ep (ep, gfp_flags) != 0) {
+ dev->in_ep = ep;
+ continue;
+ }
+ usb_ep_disable (ep);
+ result = -EIO;
+ }
+
+ /* one endpoint reads (sinks) anything out (from the host) */
+ } else if (strcmp (ep->name, EP_OUT_NAME) == 0) {
+ d = ep_desc (gadget, &hs_sink_desc, &fs_sink_desc);
+ result = usb_ep_enable (ep, d);
+ if (result == 0) {
+ ep->driver_data = dev;
+ if (source_sink_start_ep (ep, gfp_flags) != 0) {
+ dev->out_ep = ep;
+ continue;
+ }
+ usb_ep_disable (ep);
+ result = -EIO;
+ }
+
+ /* ignore any other endpoints */
+ } else
+ continue;
+
+ /* stop on error */
+ ERROR (dev, "can't start %s, result %d\n", ep->name, result);
+ break;
+ }
+ if (result == 0)
+ DBG (dev, "buflen %d\n", buflen);
+
+ /* caller is responsible for cleanup on error */
+ return result;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void loopback_complete (struct usb_ep *ep, struct usb_request *req)
+{
+ struct zero_dev *dev = ep->driver_data;
+ int status = req->status;
+
+ switch (status) {
+
+ case 0: /* normal completion? */
+ if (ep == dev->out_ep) {
+ /* loop this OUT packet back IN to the host */
+ req->zero = (req->actual < req->length);
+ req->length = req->actual;
+ status = usb_ep_queue (dev->in_ep, req, GFP_ATOMIC);
+ if (status == 0)
+ return;
+
+ /* "should never get here" */
+ ERROR (dev, "can't loop %s to %s: %d\n",
+ ep->name, dev->in_ep->name,
+ status);
+ }
+
+ /* queue the buffer for some later OUT packet */
+ req->length = buflen;
+ status = usb_ep_queue (dev->out_ep, req, GFP_ATOMIC);
+ if (status == 0)
+ return;
+
+ /* "should never get here" */
+ /* FALLTHROUGH */
+
+ default:
+ ERROR (dev, "%s loop complete --> %d, %d/%d\n", ep->name,
+ status, req->actual, req->length);
+ /* FALLTHROUGH */
+
+ /* NOTE: since this driver doesn't maintain an explicit record
+ * of requests it submitted (just maintains qlen count), we
+ * rely on the hardware driver to clean up on disconnect or
+ * endpoint disable.
+ */
+ case -ECONNABORTED: /* hardware forced ep reset */
+ case -ECONNRESET: /* request dequeued */
+ case -ESHUTDOWN: /* disconnect from host */
+ free_ep_req (ep, req);
+ return;
+ }
+}
+
+static int
+set_loopback_config (struct zero_dev *dev, int gfp_flags)
+{
+ int result = 0;
+ struct usb_ep *ep;
+ struct usb_gadget *gadget = dev->gadget;
+
+ gadget_for_each_ep (ep, gadget) {
+ const struct usb_endpoint_descriptor *d;
+
+ /* one endpoint writes data back IN to the host */
+ if (strcmp (ep->name, EP_IN_NAME) == 0) {
+ d = ep_desc (gadget, &hs_source_desc, &fs_source_desc);
+ result = usb_ep_enable (ep, d);
+ if (result == 0) {
+ ep->driver_data = dev;
+ dev->in_ep = ep;
+ continue;
+ }
+
+ /* one endpoint just reads OUT packets */
+ } else if (strcmp (ep->name, EP_OUT_NAME) == 0) {
+ d = ep_desc (gadget, &hs_sink_desc, &fs_sink_desc);
+ result = usb_ep_enable (ep, d);
+ if (result == 0) {
+ ep->driver_data = dev;
+ dev->out_ep = ep;
+ continue;
+ }
+
+ /* ignore any other endpoints */
+ } else
+ continue;
+
+ /* stop on error */
+ ERROR (dev, "can't enable %s, result %d\n", ep->name, result);
+ break;
+ }
+
+ /* allocate a bunch of read buffers and queue them all at once.
+ * we buffer at most 'qlen' transfers; fewer if any need more
+ * than 'buflen' bytes each.
+ */
+ if (result == 0) {
+ struct usb_request *req;
+ unsigned i;
+
+ ep = dev->out_ep;
+ for (i = 0; i < qlen && result == 0; i++) {
+ req = alloc_ep_req (ep, buflen);
+ if (req) {
+ req->complete = loopback_complete;
+ result = usb_ep_queue (ep, req, GFP_ATOMIC);
+ if (result)
+ DBG (dev, "%s queue req --> %d\n",
+ ep->name, result);
+ } else
+ result = -ENOMEM;
+ }
+ }
+ if (result == 0)
+ DBG (dev, "qlen %d, buflen %d\n", qlen, buflen);
+
+ /* caller is responsible for cleanup on error */
+ return result;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void zero_reset_config (struct zero_dev *dev)
+{
+ if (dev->config == 0)
+ return;
+
+ DBG (dev, "reset config\n");
+
+ /* just disable endpoints, forcing completion of pending i/o.
+ * all our completion handlers free their requests in this case.
+ */
+ if (dev->in_ep) {
+ usb_ep_disable (dev->in_ep);
+ dev->in_ep = NULL;
+ }
+ if (dev->out_ep) {
+ usb_ep_disable (dev->out_ep);
+ dev->out_ep = NULL;
+ }
+ dev->config = 0;
+ del_timer (&dev->resume);
+}
+
+/* change our operational config. this code must agree with the code
+ * that returns config descriptors, and altsetting code.
+ *
+ * it's also responsible for power management interactions. some
+ * configurations might not work with our current power sources.
+ *
+ * note that some device controller hardware will constrain what this
+ * code can do, perhaps by disallowing more than one configuration or
+ * by limiting configuration choices (like the pxa2xx).
+ */
+static int
+zero_set_config (struct zero_dev *dev, unsigned number, int gfp_flags)
+{
+ int result = 0;
+ struct usb_gadget *gadget = dev->gadget;
+
+ if (number == dev->config)
+ return 0;
+
+ if (gadget_is_sa1100 (gadget) && dev->config) {
+ /* tx fifo is full, but we can't clear it...*/
+ INFO (dev, "can't change configurations\n");
+ return -ESPIPE;
+ }
+ zero_reset_config (dev);
+
+ switch (number) {
+ case CONFIG_SOURCE_SINK:
+ result = set_source_sink_config (dev, gfp_flags);
+ break;
+ case CONFIG_LOOPBACK:
+ result = set_loopback_config (dev, gfp_flags);
+ break;
+ default:
+ result = -EINVAL;
+ /* FALL THROUGH */
+ case 0:
+ return result;
+ }
+
+ if (!result && (!dev->in_ep || !dev->out_ep))
+ result = -ENODEV;
+ if (result)
+ zero_reset_config (dev);
+ else {
+ char *speed;
+
+ switch (gadget->speed) {
+ case USB_SPEED_LOW: speed = "low"; break;
+ case USB_SPEED_FULL: speed = "full"; break;
+ case USB_SPEED_HIGH: speed = "high"; break;
+ default: speed = "?"; break;
+ }
+
+ dev->config = number;
+ INFO (dev, "%s speed config #%d: %s\n", speed, number,
+ (number == CONFIG_SOURCE_SINK)
+ ? source_sink : loopback);
+ }
+ return result;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void zero_setup_complete (struct usb_ep *ep, struct usb_request *req)
+{
+ if (req->status || req->actual != req->length)
+ DBG ((struct zero_dev *) ep->driver_data,
+ "setup complete --> %d, %d/%d\n",
+ req->status, req->actual, req->length);
+}
+
+/*
+ * The setup() callback implements all the ep0 functionality that's
+ * not handled lower down, in hardware or the hardware driver (like
+ * device and endpoint feature flags, and their status). It's all
+ * housekeeping for the gadget function we're implementing. Most of
+ * the work is in config-specific setup.
+ */
+static int
+zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
+{
+ struct zero_dev *dev = get_gadget_data (gadget);
+ struct usb_request *req = dev->req;
+ int value = -EOPNOTSUPP;
+ u16 w_index = ctrl->wIndex;
+ u16 w_value = ctrl->wValue;
+ u16 w_length = ctrl->wLength;
+
+ /* usually this stores reply data in the pre-allocated ep0 buffer,
+ * but config change events will reconfigure hardware.
+ */
+ req->zero = 0;
+ switch (ctrl->bRequest) {
+
+ case USB_REQ_GET_DESCRIPTOR:
+ if (ctrl->bRequestType != USB_DIR_IN)
+ goto unknown;
+ switch (w_value >> 8) {
+
+ case USB_DT_DEVICE:
+ value = min (w_length, (u16) sizeof device_desc);
+ memcpy (req->buf, &device_desc, value);
+ break;
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+ case USB_DT_DEVICE_QUALIFIER:
+ if (!gadget->is_dualspeed)
+ break;
+ value = min (w_length, (u16) sizeof dev_qualifier);
+ memcpy (req->buf, &dev_qualifier, value);
+ break;
+
+ case USB_DT_OTHER_SPEED_CONFIG:
+ if (!gadget->is_dualspeed)
+ break;
+ // FALLTHROUGH
+#endif /* CONFIG_USB_GADGET_DUALSPEED */
+ case USB_DT_CONFIG:
+ value = config_buf (gadget, req->buf,
+ w_value >> 8,
+ w_value & 0xff);
+ if (value >= 0)
+ value = min (w_length, (u16) value);
+ break;
+
+ case USB_DT_STRING:
+ /* wIndex == language code.
+ * this driver only handles one language, you can
+ * add string tables for other languages, using
+ * any UTF-8 characters
+ */
+ value = usb_gadget_get_string (&stringtab,
+ w_value & 0xff, req->buf);
+ if (value >= 0)
+ value = min (w_length, (u16) value);
+ break;
+ }
+ break;
+
+ /* currently two configs, two speeds */
+ case USB_REQ_SET_CONFIGURATION:
+ if (ctrl->bRequestType != 0)
+ goto unknown;
+ if (gadget->a_hnp_support)
+ DBG (dev, "HNP available\n");
+ else if (gadget->a_alt_hnp_support)
+ DBG (dev, "HNP needs a different root port\n");
+ else
+ VDBG (dev, "HNP inactive\n");
+ spin_lock (&dev->lock);
+ value = zero_set_config (dev, w_value, GFP_ATOMIC);
+ spin_unlock (&dev->lock);
+ break;
+ case USB_REQ_GET_CONFIGURATION:
+ if (ctrl->bRequestType != USB_DIR_IN)
+ goto unknown;
+ *(u8 *)req->buf = dev->config;
+ value = min (w_length, (u16) 1);
+ break;
+
+ /* until we add altsetting support, or other interfaces,
+ * only 0/0 are possible. pxa2xx only supports 0/0 (poorly)
+ * and already killed pending endpoint I/O.
+ */
+ case USB_REQ_SET_INTERFACE:
+ if (ctrl->bRequestType != USB_RECIP_INTERFACE)
+ goto unknown;
+ spin_lock (&dev->lock);
+ if (dev->config && w_index == 0 && w_value == 0) {
+ u8 config = dev->config;
+
+ /* resets interface configuration, forgets about
+ * previous transaction state (queued bufs, etc)
+ * and re-inits endpoint state (toggle etc)
+ * no response queued, just zero status == success.
+ * if we had more than one interface we couldn't
+ * use this "reset the config" shortcut.
+ */
+ zero_reset_config (dev);
+ zero_set_config (dev, config, GFP_ATOMIC);
+ value = 0;
+ }
+ spin_unlock (&dev->lock);
+ break;
+ case USB_REQ_GET_INTERFACE:
+ if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE))
+ goto unknown;
+ if (!dev->config)
+ break;
+ if (w_index != 0) {
+ value = -EDOM;
+ break;
+ }
+ *(u8 *)req->buf = 0;
+ value = min (w_length, (u16) 1);
+ break;
+
+ /*
+ * These are the same vendor-specific requests supported by
+ * Intel's USB 2.0 compliance test devices. We exceed that
+ * device spec by allowing multiple-packet requests.
+ */
+ case 0x5b: /* control WRITE test -- fill the buffer */
+ if (ctrl->bRequestType != (USB_DIR_OUT|USB_TYPE_VENDOR))
+ goto unknown;
+ if (w_value || w_index)
+ break;
+ /* just read that many bytes into the buffer */
+ if (w_length > USB_BUFSIZ)
+ break;
+ value = w_length;
+ break;
+ case 0x5c: /* control READ test -- return the buffer */
+ if (ctrl->bRequestType != (USB_DIR_IN|USB_TYPE_VENDOR))
+ goto unknown;
+ if (w_value || w_index)
+ break;
+ /* expect those bytes are still in the buffer; send back */
+ if (w_length > USB_BUFSIZ
+ || w_length != req->length)
+ break;
+ value = w_length;
+ break;
+
+ default:
+unknown:
+ VDBG (dev,
+ "unknown control req%02x.%02x v%04x i%04x l%d\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ w_value, w_index, w_length);
+ }
+
+ /* respond with data transfer before status phase? */
+ if (value >= 0) {
+ req->length = value;
+ req->zero = value < w_length;
+ value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC);
+ if (value < 0) {
+ DBG (dev, "ep_queue --> %d\n", value);
+ req->status = 0;
+ zero_setup_complete (gadget->ep0, req);
+ }
+ }
+
+ /* device either stalls (value < 0) or reports success */
+ return value;
+}
+
+static void
+zero_disconnect (struct usb_gadget *gadget)
+{
+ struct zero_dev *dev = get_gadget_data (gadget);
+ unsigned long flags;
+
+ spin_lock_irqsave (&dev->lock, flags);
+ zero_reset_config (dev);
+
+ /* a more significant application might have some non-usb
+ * activities to quiesce here, saving resources like power
+ * or pushing the notification up a network stack.
+ */
+ spin_unlock_irqrestore (&dev->lock, flags);
+
+ /* next we may get setup() calls to enumerate new connections;
+ * or an unbind() during shutdown (including removing module).
+ */
+}
+
+static void
+zero_autoresume (unsigned long _dev)
+{
+ struct zero_dev *dev = (struct zero_dev *) _dev;
+ int status;
+
+ /* normally the host would be woken up for something
+ * more significant than just a timer firing...
+ */
+ if (dev->gadget->speed != USB_SPEED_UNKNOWN) {
+ status = usb_gadget_wakeup (dev->gadget);
+ DBG (dev, "wakeup --> %d\n", status);
+ }
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void
+zero_unbind (struct usb_gadget *gadget)
+{
+ struct zero_dev *dev = get_gadget_data (gadget);
+
+ DBG (dev, "unbind\n");
+
+ /* we've already been disconnected ... no i/o is active */
+ if (dev->req)
+ free_ep_req (gadget->ep0, dev->req);
+ del_timer_sync (&dev->resume);
+ kfree (dev);
+ set_gadget_data (gadget, NULL);
+}
+
+static int
+zero_bind (struct usb_gadget *gadget)
+{
+ struct zero_dev *dev;
+ struct usb_ep *ep;
+
+ /* Bulk-only drivers like this one SHOULD be able to
+ * autoconfigure on any sane usb controller driver,
+ * but there may also be important quirks to address.
+ */
+ usb_ep_autoconfig_reset (gadget);
+ ep = usb_ep_autoconfig (gadget, &fs_source_desc);
+ if (!ep) {
+autoconf_fail:
+ printk (KERN_ERR "%s: can't autoconfigure on %s\n",
+ shortname, gadget->name);
+ return -ENODEV;
+ }
+ EP_IN_NAME = ep->name;
+ ep->driver_data = ep; /* claim */
+
+ ep = usb_ep_autoconfig (gadget, &fs_sink_desc);
+ if (!ep)
+ goto autoconf_fail;
+ EP_OUT_NAME = ep->name;
+ ep->driver_data = ep; /* claim */
+
+
+ /*
+ * DRIVER POLICY CHOICE: you may want to do this differently.
+ * One thing to avoid is reusing a bcdDevice revision code
+ * with different host-visible configurations or behavior
+ * restrictions -- using ep1in/ep2out vs ep1out/ep3in, etc
+ */
+ if (gadget_is_net2280 (gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0201);
+ } else if (gadget_is_pxa (gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0203);
+#if 0
+ } else if (gadget_is_sh(gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0204);
+ /* SH has only one configuration; see "loopdefault" */
+ device_desc.bNumConfigurations = 1;
+ /* FIXME make 1 == default.bConfigurationValue */
+#endif
+ } else if (gadget_is_sa1100 (gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0205);
+ } else if (gadget_is_goku (gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0206);
+ } else if (gadget_is_mq11xx (gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0207);
+ } else if (gadget_is_omap (gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0208);
+ } else if (gadget_is_lh7a40x(gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0209);
+ } else if (gadget_is_n9604(gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0210);
+ } else if (gadget_is_pxa27x(gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0211);
+ } else if (gadget_is_s3c2410(gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0212);
+ } else if (gadget_is_at91(gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0213);
+ } else {
+ /* gadget zero is so simple (for now, no altsettings) that
+ * it SHOULD NOT have problems with bulk-capable hardware.
+ * so warn about unrcognized controllers, don't panic.
+ *
+ * things like configuration and altsetting numbering
+ * can need hardware-specific attention though.
+ */
+ printk (KERN_WARNING "%s: controller '%s' not recognized\n",
+ shortname, gadget->name);
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x9999);
+ }
+
+
+ /* ok, we made sense of the hardware ... */
+ dev = kmalloc (sizeof *dev, SLAB_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+ memset (dev, 0, sizeof *dev);
+ spin_lock_init (&dev->lock);
+ dev->gadget = gadget;
+ set_gadget_data (gadget, dev);
+
+ /* preallocate control response and buffer */
+ dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL);
+ if (!dev->req)
+ goto enomem;
+ dev->req->buf = usb_ep_alloc_buffer (gadget->ep0, USB_BUFSIZ,
+ &dev->req->dma, GFP_KERNEL);
+ if (!dev->req->buf)
+ goto enomem;
+
+ dev->req->complete = zero_setup_complete;
+
+ device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
+
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+ /* assume ep0 uses the same value for both speeds ... */
+ dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0;
+
+ /* and that all endpoints are dual-speed */
+ hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress;
+ hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress;
+#endif
+
+ if (gadget->is_otg) {
+ otg_descriptor.bmAttributes |= USB_OTG_HNP,
+ source_sink_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ }
+
+ if (gadget->is_otg) {
+ otg_descriptor.bmAttributes |= USB_OTG_HNP,
+ source_sink_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ }
+
+ usb_gadget_set_selfpowered (gadget);
+
+ init_timer (&dev->resume);
+ dev->resume.function = zero_autoresume;
+ dev->resume.data = (unsigned long) dev;
+ if (autoresume) {
+ source_sink_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ }
+
+ gadget->ep0->driver_data = dev;
+
+ INFO (dev, "%s, version: " DRIVER_VERSION "\n", longname);
+ INFO (dev, "using %s, OUT %s IN %s\n", gadget->name,
+ EP_OUT_NAME, EP_IN_NAME);
+
+ snprintf (manufacturer, sizeof manufacturer, "%s %s with %s",
+ system_utsname.sysname, system_utsname.release,
+ gadget->name);
+
+ return 0;
+
+enomem:
+ zero_unbind (gadget);
+ return -ENOMEM;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void
+zero_suspend (struct usb_gadget *gadget)
+{
+ struct zero_dev *dev = get_gadget_data (gadget);
+
+ if (gadget->speed == USB_SPEED_UNKNOWN)
+ return;
+
+ if (autoresume) {
+ mod_timer (&dev->resume, jiffies + (HZ * autoresume));
+ DBG (dev, "suspend, wakeup in %d seconds\n", autoresume);
+ } else
+ DBG (dev, "suspend\n");
+}
+
+static void
+zero_resume (struct usb_gadget *gadget)
+{
+ struct zero_dev *dev = get_gadget_data (gadget);
+
+ DBG (dev, "resume\n");
+ del_timer (&dev->resume);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_gadget_driver zero_driver = {
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+ .speed = USB_SPEED_HIGH,
+#else
+ .speed = USB_SPEED_FULL,
+#endif
+ .function = (char *) longname,
+ .bind = zero_bind,
+ .unbind = zero_unbind,
+
+ .setup = zero_setup,
+ .disconnect = zero_disconnect,
+
+ .suspend = zero_suspend,
+ .resume = zero_resume,
+
+ .driver = {
+ .name = (char *) shortname,
+ // .shutdown = ...
+ // .suspend = ...
+ // .resume = ...
+ },
+};
+
+MODULE_AUTHOR ("David Brownell");
+MODULE_LICENSE ("Dual BSD/GPL");
+
+
+static int __init init (void)
+{
+ /* a real value would likely come through some id prom
+ * or module option. this one takes at least two packets.
+ */
+ strlcpy (serial, "0123456789.0123456789.0123456789", sizeof serial);
+
+ return usb_gadget_register_driver (&zero_driver);
+}
+module_init (init);
+
+static void __exit cleanup (void)
+{
+ usb_gadget_unregister_driver (&zero_driver);
+}
+module_exit (cleanup);
+