diff options
Diffstat (limited to 'drivers/usb/gadget')
25 files changed, 2972 insertions, 645 deletions
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 767aed5b4be..f81d08d6538 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -67,6 +67,17 @@ config USB_GADGET_DEBUG_FILES driver on a new board. Enable these files by choosing "Y" here. If in doubt, or to conserve kernel memory, say "N". +config USB_GADGET_DEBUG_FS + boolean "Debugging information files in debugfs" + depends on USB_GADGET && DEBUG_FS + help + Some of the drivers in the "gadget" framework can expose + debugging information in files under /sys/kernel/debug/. + The information in these files may help when you're + troubleshooting or bringing up a driver on a new board. + Enable these files by choosing "Y" here. If in doubt, or + to conserve kernel memory, say "N". + config USB_GADGET_SELECTED boolean @@ -103,6 +114,20 @@ config USB_AMD5536UDC default USB_GADGET select USB_GADGET_SELECTED +config USB_GADGET_ATMEL_USBA + boolean "Atmel USBA" + select USB_GADGET_DUALSPEED + depends on AVR32 + help + USBA is the integrated high-speed USB Device controller on + the AT32AP700x processors from Atmel. + +config USB_ATMEL_USBA + tristate + depends on USB_GADGET_ATMEL_USBA + default USB_GADGET + select USB_GADGET_SELECTED + config USB_GADGET_FSL_USB2 boolean "Freescale Highspeed USB DR Peripheral Controller" depends on MPC834x || PPC_MPC831x @@ -228,7 +253,6 @@ config USB_LH7A40X default USB_GADGET select USB_GADGET_SELECTED - config USB_GADGET_OMAP boolean "OMAP USB Device Controller" depends on ARCH_OMAP diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 1bc0f03550c..904e57bf611 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_USB_OMAP) += omap_udc.o obj-$(CONFIG_USB_LH7A40X) += lh7a40x_udc.o obj-$(CONFIG_USB_S3C2410) += s3c2410_udc.o obj-$(CONFIG_USB_AT91) += at91_udc.o +obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o obj-$(CONFIG_USB_M66592) += m66592-udc.o diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index 714156ca8fe..1c804060252 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -69,7 +69,7 @@ /* gadget stack */ #include <linux/usb/ch9.h> -#include <linux/usb_gadget.h> +#include <linux/usb/gadget.h> /* udc specific */ #include "amd5536udc.h" @@ -3244,7 +3244,6 @@ static int udc_pci_probe( retval = -ENOMEM; goto finished; } - memset(dev, 0, sizeof(struct udc)); /* pci setup */ if (pci_enable_device(pdev) < 0) { @@ -3286,14 +3285,12 @@ static int udc_pci_probe( pci_set_drvdata(pdev, dev); - /* chip revision */ - dev->chiprev = 0; + /* chip revision for Hs AMD5536 */ + dev->chiprev = pdev->revision; pci_set_master(pdev); pci_set_mwi(pdev); - /* chip rev for Hs AMD5536 */ - pci_read_config_byte(pdev, PCI_REVISION_ID, (u8 *) &dev->chiprev); /* init dma pools */ if (use_dma) { retval = init_dma_pools(dev); diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 63d7d656869..a6adf7e0f6f 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -38,7 +38,7 @@ #include <linux/proc_fs.h> #include <linux/clk.h> #include <linux/usb/ch9.h> -#include <linux/usb_gadget.h> +#include <linux/usb/gadget.h> #include <asm/byteorder.h> #include <asm/hardware.h> diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c new file mode 100644 index 00000000000..4fb5ff46957 --- /dev/null +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -0,0 +1,2077 @@ +/* + * Driver for the Atmel USBA high speed USB device controller + * + * Copyright (C) 2005-2007 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/list.h> +#include <linux/platform_device.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/delay.h> + +#include <asm/gpio.h> +#include <asm/arch/board.h> + +#include "atmel_usba_udc.h" + + +static struct usba_udc the_udc; + +#ifdef CONFIG_USB_GADGET_DEBUG_FS +#include <linux/debugfs.h> +#include <linux/uaccess.h> + +static int queue_dbg_open(struct inode *inode, struct file *file) +{ + struct usba_ep *ep = inode->i_private; + struct usba_request *req, *req_copy; + struct list_head *queue_data; + + queue_data = kmalloc(sizeof(*queue_data), GFP_KERNEL); + if (!queue_data) + return -ENOMEM; + INIT_LIST_HEAD(queue_data); + + spin_lock_irq(&ep->udc->lock); + list_for_each_entry(req, &ep->queue, queue) { + req_copy = kmalloc(sizeof(*req_copy), GFP_ATOMIC); + if (!req_copy) + goto fail; + memcpy(req_copy, req, sizeof(*req_copy)); + list_add_tail(&req_copy->queue, queue_data); + } + spin_unlock_irq(&ep->udc->lock); + + file->private_data = queue_data; + return 0; + +fail: + spin_unlock_irq(&ep->udc->lock); + list_for_each_entry_safe(req, req_copy, queue_data, queue) { + list_del(&req->queue); + kfree(req); + } + kfree(queue_data); + return -ENOMEM; +} + +/* + * bbbbbbbb llllllll IZS sssss nnnn FDL\n\0 + * + * b: buffer address + * l: buffer length + * I/i: interrupt/no interrupt + * Z/z: zero/no zero + * S/s: short ok/short not ok + * s: status + * n: nr_packets + * F/f: submitted/not submitted to FIFO + * D/d: using/not using DMA + * L/l: last transaction/not last transaction + */ +static ssize_t queue_dbg_read(struct file *file, char __user *buf, + size_t nbytes, loff_t *ppos) +{ + struct list_head *queue = file->private_data; + struct usba_request *req, *tmp_req; + size_t len, remaining, actual = 0; + char tmpbuf[38]; + + if (!access_ok(VERIFY_WRITE, buf, nbytes)) + return -EFAULT; + + mutex_lock(&file->f_dentry->d_inode->i_mutex); + list_for_each_entry_safe(req, tmp_req, queue, queue) { + len = snprintf(tmpbuf, sizeof(tmpbuf), + "%8p %08x %c%c%c %5d %c%c%c\n", + req->req.buf, req->req.length, + req->req.no_interrupt ? 'i' : 'I', + req->req.zero ? 'Z' : 'z', + req->req.short_not_ok ? 's' : 'S', + req->req.status, + req->submitted ? 'F' : 'f', + req->using_dma ? 'D' : 'd', + req->last_transaction ? 'L' : 'l'); + len = min(len, sizeof(tmpbuf)); + if (len > nbytes) + break; + + list_del(&req->queue); + kfree(req); + + remaining = __copy_to_user(buf, tmpbuf, len); + actual += len - remaining; + if (remaining) + break; + + nbytes -= len; + buf += len; + } + mutex_unlock(&file->f_dentry->d_inode->i_mutex); + + return actual; +} + +static int queue_dbg_release(struct inode *inode, struct file *file) +{ + struct list_head *queue_data = file->private_data; + struct usba_request *req, *tmp_req; + + list_for_each_entry_safe(req, tmp_req, queue_data, queue) { + list_del(&req->queue); + kfree(req); + } + kfree(queue_data); + return 0; +} + +static int regs_dbg_open(struct inode *inode, struct file *file) +{ + struct usba_udc *udc; + unsigned int i; + u32 *data; + int ret = -ENOMEM; + + mutex_lock(&inode->i_mutex); + udc = inode->i_private; + data = kmalloc(inode->i_size, GFP_KERNEL); + if (!data) + goto out; + + spin_lock_irq(&udc->lock); + for (i = 0; i < inode->i_size / 4; i++) + data[i] = __raw_readl(udc->regs + i * 4); + spin_unlock_irq(&udc->lock); + + file->private_data = data; + ret = 0; + +out: + mutex_unlock(&inode->i_mutex); + + return ret; +} + +static ssize_t regs_dbg_read(struct file *file, char __user *buf, + size_t nbytes, loff_t *ppos) +{ + struct inode *inode = file->f_dentry->d_inode; + int ret; + + mutex_lock(&inode->i_mutex); + ret = simple_read_from_buffer(buf, nbytes, ppos, + file->private_data, + file->f_dentry->d_inode->i_size); + mutex_unlock(&inode->i_mutex); + + return ret; +} + +static int regs_dbg_release(struct inode *inode, struct file *file) +{ + kfree(file->private_data); + return 0; +} + +const struct file_operations queue_dbg_fops = { + .owner = THIS_MODULE, + .open = queue_dbg_open, + .llseek = no_llseek, + .read = queue_dbg_read, + .release = queue_dbg_release, +}; + +const struct file_operations regs_dbg_fops = { + .owner = THIS_MODULE, + .open = regs_dbg_open, + .llseek = generic_file_llseek, + .read = regs_dbg_read, + .release = regs_dbg_release, +}; + +static void usba_ep_init_debugfs(struct usba_udc *udc, + struct usba_ep *ep) +{ + struct dentry *ep_root; + + ep_root = debugfs_create_dir(ep->ep.name, udc->debugfs_root); + if (!ep_root) + goto err_root; + ep->debugfs_dir = ep_root; + + ep->debugfs_queue = debugfs_create_file("queue", 0400, ep_root, + ep, &queue_dbg_fops); + if (!ep->debugfs_queue) + goto err_queue; + + if (ep->can_dma) { + ep->debugfs_dma_status + = debugfs_create_u32("dma_status", 0400, ep_root, + &ep->last_dma_status); + if (!ep->debugfs_dma_status) + goto err_dma_status; + } + if (ep_is_control(ep)) { + ep->debugfs_state + = debugfs_create_u32("state", 0400, ep_root, + &ep->state); + if (!ep->debugfs_state) + goto err_state; + } + + return; + +err_state: + if (ep->can_dma) + debugfs_remove(ep->debugfs_dma_status); +err_dma_status: + debugfs_remove(ep->debugfs_queue); +err_queue: + debugfs_remove(ep_root); +err_root: + dev_err(&ep->udc->pdev->dev, + "failed to create debugfs directory for %s\n", ep->ep.name); +} + +static void usba_ep_cleanup_debugfs(struct usba_ep *ep) +{ + debugfs_remove(ep->debugfs_queue); + debugfs_remove(ep->debugfs_dma_status); + debugfs_remove(ep->debugfs_state); + debugfs_remove(ep->debugfs_dir); + ep->debugfs_dma_status = NULL; + ep->debugfs_dir = NULL; +} + +static void usba_init_debugfs(struct usba_udc *udc) +{ + struct dentry *root, *regs; + struct resource *regs_resource; + + root = debugfs_create_dir(udc->gadget.name, NULL); + if (IS_ERR(root) || !root) + goto err_root; + udc->debugfs_root = root; + + regs = debugfs_create_file("regs", 0400, root, udc, ®s_dbg_fops); + if (!regs) + goto err_regs; + + regs_resource = platform_get_resource(udc->pdev, IORESOURCE_MEM, + CTRL_IOMEM_ID); + regs->d_inode->i_size = regs_resource->end - regs_resource->start + 1; + udc->debugfs_regs = regs; + + usba_ep_init_debugfs(udc, to_usba_ep(udc->gadget.ep0)); + + return; + +err_regs: + debugfs_remove(root); +err_root: + udc->debugfs_root = NULL; + dev_err(&udc->pdev->dev, "debugfs is not available\n"); +} + +static void usba_cleanup_debugfs(struct usba_udc *udc) +{ + usba_ep_cleanup_debugfs(to_usba_ep(udc->gadget.ep0)); + debugfs_remove(udc->debugfs_regs); + debugfs_remove(udc->debugfs_root); + udc->debugfs_regs = NULL; + udc->debugfs_root = NULL; +} +#else +static inline void usba_ep_init_debugfs(struct usba_udc *udc, + struct usba_ep *ep) +{ + +} + +static inline void usba_ep_cleanup_debugfs(struct usba_ep *ep) +{ + +} + +static inline void usba_init_debugfs(struct usba_udc *udc) +{ + +} + +static inline void usba_cleanup_debugfs(struct usba_udc *udc) +{ + +} +#endif + +static int vbus_is_present(struct usba_udc *udc) +{ + if (udc->vbus_pin != -1) + return gpio_get_value(udc->vbus_pin); + + /* No Vbus detection: Assume always present */ + return 1; +} + +static void copy_to_fifo(void __iomem *fifo, const void *buf, int len) +{ + unsigned long tmp; + + DBG(DBG_FIFO, "copy to FIFO (len %d):\n", len); + for (; len > 0; len -= 4, buf += 4, fifo += 4) { + tmp = *(unsigned long *)buf; + if (len >= 4) { + DBG(DBG_FIFO, " -> %08lx\n", tmp); + __raw_writel(tmp, fifo); + } else { + do { + DBG(DBG_FIFO, " -> %02lx\n", tmp >> 24); + __raw_writeb(tmp >> 24, fifo); + fifo++; + tmp <<= 8; + } while (--len); + break; + } + } +} + +static void copy_from_fifo(void *buf, void __iomem *fifo, int len) +{ + union { + unsigned long *w; + unsigned char *b; + } p; + unsigned long tmp; + + DBG(DBG_FIFO, "copy from FIFO (len %d):\n", len); + for (p.w = buf; len > 0; len -= 4, p.w++, fifo += 4) { + if (len >= 4) { + tmp = __raw_readl(fifo); + *p.w = tmp; + DBG(DBG_FIFO, " -> %08lx\n", tmp); + } else { + do { + tmp = __raw_readb(fifo); + *p.b = tmp; + DBG(DBG_FIFO, " -> %02lx\n", tmp); + fifo++, p.b++; + } while (--len); + } + } +} + +static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req) +{ + unsigned int transaction_len; + + transaction_len = req->req.length - req->req.actual; + req->last_transaction = 1; + if (transaction_len > ep->ep.maxpacket) { + transaction_len = ep->ep.maxpacket; + req->last_transaction = 0; + } else if (transaction_len == ep->ep.maxpacket && req->req.zero) + req->last_transaction = 0; + + DBG(DBG_QUEUE, "%s: submit_transaction, req %p (length %d)%s\n", + ep->ep.name, req, transaction_len, + req->last_transaction ? ", done" : ""); + + copy_to_fifo(ep->fifo, req->req.buf + req->req.actual, transaction_len); + usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY); + req->req.actual += transaction_len; +} + +static void submit_request(struct usba_ep *ep, struct usba_request *req) +{ + DBG(DBG_QUEUE, "%s: submit_request: req %p (length %d)\n", + ep->ep.name, req, req->req.length); + + req->req.actual = 0; + req->submitted = 1; + + if (req->using_dma) { + if (req->req.length == 0) { + usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY); + return; + } + + if (req->req.zero) + usba_ep_writel(ep, CTL_ENB, USBA_SHORT_PACKET); + else + usba_ep_writel(ep, CTL_DIS, USBA_SHORT_PACKET); + + usba_dma_writel(ep, ADDRESS, req->req.dma); + usba_dma_writel(ep, CONTROL, req->ctrl); + } else { + next_fifo_transaction(ep, req); + if (req->last_transaction) { + usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY); + usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE); + } else { + usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE); + usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY); + } + } +} + +static void submit_next_request(struct usba_ep *ep) +{ + struct usba_request *req; + + if (list_empty(&ep->queue)) { + usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY | USBA_RX_BK_RDY); + return; + } + + req = list_entry(ep->queue.next, struct usba_request, queue); + if (!req->submitted) + submit_request(ep, req); +} + +static void send_status(struct usba_udc *udc, struct usba_ep *ep) +{ + ep->state = STATUS_STAGE_IN; + usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY); + usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE); +} + +static void receive_data(struct usba_ep *ep) +{ + struct usba_udc *udc = ep->udc; + struct usba_request *req; + unsigned long status; + unsigned int bytecount, nr_busy; + int is_complete = 0; + + status = usba_ep_readl(ep, STA); + nr_busy = USBA_BFEXT(BUSY_BANKS, status); + + DBG(DBG_QUEUE, "receive data: nr_busy=%u\n", nr_busy); + + while (nr_busy > 0) { + if (list_empty(&ep->queue)) { + usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY); + break; + } + req = list_entry(ep->queue.next, + struct usba_request, queue); + + bytecount = USBA_BFEXT(BYTE_COUNT, status); + + if (status & (1 << 31)) + is_complete = 1; + if (req->req.actual + bytecount >= req->req.length) { + is_complete = 1; + bytecount = req->req.length - req->req.actual; + } + + copy_from_fifo(req->req.buf + req->req.actual, + ep->fifo, bytecount); + req->req.actual += bytecount; + + usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY); + + if (is_complete) { + DBG(DBG_QUEUE, "%s: request done\n", ep->ep.name); + req->req.status = 0; + list_del_init(&req->queue); + usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY); + spin_unlock(&udc->lock); + req->req.complete(&ep->ep, &req->req); + spin_lock(&udc->lock); + } + + status = usba_ep_readl(ep, STA); + nr_busy = USBA_BFEXT(BUSY_BANKS, status); + + if (is_complete && ep_is_control(ep)) { + send_status(udc, ep); + break; + } + } +} + +static void +request_complete(struct usba_ep *ep, struct usba_request *req, int status) +{ + struct usba_udc *udc = ep->udc; + + WARN_ON(!list_empty(&req->queue)); + + if (req->req.status == -EINPROGRESS) + req->req.status = status; + + if (req->mapped) { + dma_unmap_single( + &udc->pdev->dev, req->req.dma, req->req.length, + ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + req->req.dma = DMA_ADDR_INVALID; + req->mapped = 0; + } + + DBG(DBG_GADGET | DBG_REQ, + "%s: req %p complete: status %d, actual %u\n", + ep->ep.name, req, req->req.status, req->req.actual); + + spin_unlock(&udc->lock); + req->req.complete(&ep->ep, &req->req); + spin_lock(&udc->lock); +} + +static void +request_complete_list(struct usba_ep *ep, struct list_head *list, int status) +{ + struct usba_request *req, *tmp_req; + + list_for_each_entry_safe(req, tmp_req, list, queue) { + list_del_init(&req->queue); + request_complete(ep, req, status); + } +} + +static int +usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) +{ + struct usba_ep *ep = to_usba_ep(_ep); + struct usba_udc *udc = ep->udc; + unsigned long flags, ept_cfg, maxpacket; + unsigned int nr_trans; + + DBG(DBG_GADGET, "%s: ep_enable: desc=%p\n", ep->ep.name, desc); + + maxpacket = le16_to_cpu(desc->wMaxPacketSize) & 0x7ff; + + if (((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != ep->index) + || ep->index == 0 + || desc->bDescriptorType != USB_DT_ENDPOINT + || maxpacket == 0 + || maxpacket > ep->fifo_size) { + DBG(DBG_ERR, "ep_enable: Invalid argument"); + return -EINVAL; + } + + ep->is_isoc = 0; + ep->is_in = 0; + + if (maxpacket <= 8) + ept_cfg = USBA_BF(EPT_SIZE, USBA_EPT_SIZE_8); + else + /* LSB is bit 1, not 0 */ + ept_cfg = USBA_BF(EPT_SIZE, fls(maxpacket - 1) - 3); + + DBG(DBG_HW, "%s: EPT_SIZE = %lu (maxpacket = %lu)\n", + ep->ep.name, ept_cfg, maxpacket); + + if ((desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) { + ep->is_in = 1; + ept_cfg |= USBA_EPT_DIR_IN; + } + + switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { + case USB_ENDPOINT_XFER_CONTROL: + ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL); + ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE); + break; + case USB_ENDPOINT_XFER_ISOC: + if (!ep->can_isoc) { + DBG(DBG_ERR, "ep_enable: %s is not isoc capable\n", + ep->ep.name); + return -EINVAL; + } + + /* + * Bits 11:12 specify number of _additional_ + * transactions per microframe. + */ + nr_trans = ((le16_to_cpu(desc->wMaxPacketSize) >> 11) & 3) + 1; + if (nr_trans > 3) + return -EINVAL; + + ep->is_isoc = 1; + ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_ISO); + + /* + * Do triple-buffering on high-bandwidth iso endpoints. + */ + if (nr_trans > 1 && ep->nr_banks == 3) + ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_TRIPLE); + else + ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_DOUBLE); + ept_cfg |= USBA_BF(NB_TRANS, nr_trans); + break; + case USB_ENDPOINT_XFER_BULK: + ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK); + ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_DOUBLE); + break; + case USB_ENDPOINT_XFER_INT: + ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_INT); + ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_DOUBLE); + break; + } + + spin_lock_irqsave(&ep->udc->lock, flags); + + if (ep->desc) { + spin_unlock_irqrestore(&ep->udc->lock, flags); + DBG(DBG_ERR, "ep%d already enabled\n", ep->index); + return -EBUSY; + } + + ep->desc = desc; + ep->ep.maxpacket = maxpacket; + + usba_ep_writel(ep, CFG, ept_cfg); + usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE); + + if (ep->can_dma) { + u32 ctrl; + + usba_writel(udc, INT_ENB, + (usba_readl(udc, INT_ENB) + | USBA_BF(EPT_INT, 1 << ep->index) + | USBA_BF(DMA_INT, 1 << ep->index))); + ctrl = USBA_AUTO_VALID | USBA_INTDIS_DMA; + usba_ep_writel(ep, CTL_ENB, ctrl); + } else { + usba_writel(udc, INT_ENB, + (usba_readl(udc, INT_ENB) + | USBA_BF(EPT_INT, 1 << ep->index))); + } + + spin_unlock_irqrestore(&udc->lock, flags); + + DBG(DBG_HW, "EPT_CFG%d after init: %#08lx\n", ep->index, + (unsigned long)usba_ep_readl(ep, CFG)); + DBG(DBG_HW, "INT_ENB after init: %#08lx\n", + (unsigned long)usba_readl(udc, INT_ENB)); + + return 0; +} + +static int usba_ep_disable(struct usb_ep *_ep) +{ + struct usba_ep *ep = to_usba_ep(_ep); + struct usba_udc *udc = ep->udc; + LIST_HEAD(req_list); + unsigned long flags; + + DBG(DBG_GADGET, "ep_disable: %s\n", ep->ep.name); + + spin_lock_irqsave(&udc->lock, flags); + + if (!ep->desc) { + spin_unlock_irqrestore(&udc->lock, flags); + DBG(DBG_ERR, "ep_disable: %s not enabled\n", ep->ep.name); + return -EINVAL; + } + ep->desc = NULL; + + list_splice_init(&ep->queue, &req_list); + if (ep->can_dma) { + usba_dma_writel(ep, CONTROL, 0); + usba_dma_writel(ep, ADDRESS, 0); + usba_dma_readl(ep, STATUS); + } + usba_ep_writel(ep, CTL_DIS, USBA_EPT_ENABLE); + usba_writel(udc, INT_ENB, + usba_readl(udc, INT_ENB) + & ~USBA_BF(EPT_INT, 1 << ep->index)); + + request_complete_list(ep, &req_list, -ESHUTDOWN); + + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static struct usb_request * +usba_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) +{ + struct usba_request *req; + + DBG(DBG_GADGET, "ep_alloc_request: %p, 0x%x\n", _ep, gfp_flags); + + req = kzalloc(sizeof(*req), gfp_flags); + if (!req) + return NULL; + + INIT_LIST_HEAD(&req->queue); + req->req.dma = DMA_ADDR_INVALID; + + return &req->req; +} + +static void +usba_ep_free_request(struct usb_ep *_ep, struct usb_request *_req) +{ + struct usba_request *req = to_usba_req(_req); + + DBG(DBG_GADGET, "ep_free_request: %p, %p\n", _ep, _req); + + kfree(req); +} + +static int queue_dma(struct usba_udc *udc, struct usba_ep *ep, + struct usba_request *req, gfp_t gfp_flags) +{ + unsigned long flags; + int ret; + + DBG(DBG_DMA, "%s: req l/%u d/%08x %c%c%c\n", + ep->ep.name, req->req.length, req->req.dma, + req->req.zero ? 'Z' : 'z', + req->req.short_not_ok ? 'S' : 's', + req->req.no_interrupt ? 'I' : 'i'); + + if (req->req.length > 0x10000) { + /* Lengths from 0 to 65536 (inclusive) are supported */ + DBG(DBG_ERR, "invalid request length %u\n", req->req.length); + return -EINVAL; + } + + req->using_dma = 1; + + if (req->req.dma == DMA_ADDR_INVALID) { + req->req.dma = dma_map_single( + &udc->pdev->dev, req->req.buf, req->req.length, + ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + req->mapped = 1; + } else { + dma_sync_single_for_device( + &udc->pdev->dev, req->req.dma, req->req.length, + ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + req->mapped = 0; + } + + req->ctrl = USBA_BF(DMA_BUF_LEN, req->req.length) + | USBA_DMA_CH_EN | USBA_DMA_END_BUF_IE + | USBA_DMA_END_TR_EN | USBA_DMA_END_TR_IE; + + if (ep->is_in) + req->ctrl |= USBA_DMA_END_BUF_EN; + + /* + * Add this request to the queue and submit for DMA if + * possible. Check if we're still alive first -- we may have + * received a reset since last time we checked. + */ + ret = -ESHUTDOWN; + spin_lock_irqsave(&udc->lock, flags); + if (ep->desc) { + if (list_empty(&ep->queue)) + submit_request(ep, req); + + list_add_tail(&req->queue, &ep->queue); + ret = 0; + } + spin_unlock_irqrestore(&udc->lock, flags); + + return ret; +} + +static int +usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) +{ + struct usba_request *req = to_usba_req(_req); + struct usba_ep *ep = to_usba_ep(_ep); + struct usba_udc *udc = ep->udc; + unsigned long flags; + int ret; + + DBG(DBG_GADGET | DBG_QUEUE | DBG_REQ, "%s: queue req %p, len %u\n", + ep->ep.name, req, _req->length); + + if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN || !ep->desc) + return -ESHUTDOWN; + + req->submitted = 0; + req->using_dma = 0; + req->last_transaction = 0; + + _req->status = -EINPROGRESS; + _req->actual = 0; + + if (ep->can_dma) + return queue_dma(udc, ep, req, gfp_flags); + + /* May have received a reset since last time we checked */ + ret = -ESHUTDOWN; + spin_lock_irqsave(&udc->lock, flags); + if (ep->desc) { + list_add_tail(&req->queue, &ep->queue); + + if (ep->is_in || (ep_is_control(ep) + && (ep->state == DATA_STAGE_IN + || ep->state == STATUS_STAGE_IN))) + usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY); + else + usba_ep_writel(ep, CTL_ENB, USBA_RX_BK_RDY); + ret = 0; + } + spin_unlock_irqrestore(&udc->lock, flags); + + return ret; +} + +static void +usba_update_req(struct usba_ep *ep, struct usba_request *req, u32 status) +{ + req->req.actual = req->req.length - USBA_BFEXT(DMA_BUF_LEN, status); +} + +static int stop_dma(struct usba_ep *ep, u32 *pstatus) +{ + unsigned int timeout; + u32 status; + + /* + * Stop the DMA controller. When writing both CH_EN + * and LINK to 0, the other bits are not affected. + */ + usba_dma_writel(ep, CONTROL, 0); + + /* Wait for the FIFO to empty */ + for (timeout = 40; timeout; --timeout) { + status = usba_dma_readl(ep, STATUS); + if (!(status & USBA_DMA_CH_EN)) + break; + udelay(1); + } + + if (pstatus) + *pstatus = status; + + if (timeout == 0) { + dev_err(&ep->udc->pdev->dev, + "%s: timed out waiting for DMA FIFO to empty\n", + ep->ep.name); + return -ETIMEDOUT; + } + + return 0; +} + +static int usba_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct usba_ep *ep = to_usba_ep(_ep); + struct usba_udc *udc = ep->udc; + struct usba_request *req = to_usba_req(_req); + unsigned long flags; + u32 status; + + DBG(DBG_GADGET | DBG_QUEUE, "ep_dequeue: %s, req %p\n", + ep->ep.name, req); + + spin_lock_irqsave(&udc->lock, flags); + + if (req->using_dma) { + /* + * If this request is currently being transferred, + * stop the DMA controller and reset the FIFO. + */ + if (ep->queue.next == &req->queue) { + status = usba_dma_readl(ep, STATUS); + if (status & USBA_DMA_CH_EN) + stop_dma(ep, &status); + +#ifdef CONFIG_USB_GADGET_DEBUG_FS + ep->last_dma_status = status; +#endif + + usba_writel(udc, EPT_RST, 1 << ep->index); + + usba_update_req(ep, req, status); + } + } + + /* + * Errors should stop the queue from advancing until the + * completion function returns. + */ + list_del_init(&req->queue); + + request_complete(ep, req, -ECONNRESET); + + /* Process the next request if any */ + submit_next_request(ep); + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static int usba_ep_set_halt(struct usb_ep *_ep, int value) +{ + struct usba_ep *ep = to_usba_ep(_ep); + struct usba_udc *udc = ep->udc; + unsigned long flags; + int ret = 0; + + DBG(DBG_GADGET, "endpoint %s: %s HALT\n", ep->ep.name, + value ? "set" : "clear"); + + if (!ep->desc) { + DBG(DBG_ERR, "Attempted to halt uninitialized ep %s\n", + ep->ep.name); + return -ENODEV; + } + if (ep->is_isoc) { + DBG(DBG_ERR, "Attempted to halt isochronous ep %s\n", + ep->ep.name); + return -ENOTTY; + } + + spin_lock_irqsave(&udc->lock, flags); + + /* + * We can't halt IN endpoints while there are still data to be + * transferred + */ + if (!list_empty(&ep->queue) + || ((value && ep->is_in && (usba_ep_readl(ep, STA) + & USBA_BF(BUSY_BANKS, -1L))))) { + ret = -EAGAIN; + } else { + if (value) + usba_ep_writel(ep, SET_STA, USBA_FORCE_STALL); + else + usba_ep_writel(ep, CLR_STA, + USBA_FORCE_STALL | USBA_TOGGLE_CLR); + usba_ep_readl(ep, STA); + } + + spin_unlock_irqrestore(&udc->lock, flags); + + return ret; +} + +static int usba_ep_fifo_status(struct usb_ep *_ep) +{ + struct usba_ep *ep = to_usba_ep(_ep); + + return USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA)); +} + +static void usba_ep_fifo_flush(struct usb_ep *_ep) +{ + struct usba_ep *ep = to_usba_ep(_ep); + struct usba_udc *udc = ep->udc; + + usba_writel(udc, EPT_RST, 1 << ep->index); +} + +static const struct usb_ep_ops usba_ep_ops = { + .enable = usba_ep_enable, + .disable = usba_ep_disable, + .alloc_request = usba_ep_alloc_request, + .free_request = usba_ep_free_request, + .queue = usba_ep_queue, + .dequeue = usba_ep_dequeue, + .set_halt = usba_ep_set_halt, + .fifo_status = usba_ep_fifo_status, + .fifo_flush = usba_ep_fifo_flush, +}; + +static int usba_udc_get_frame(struct usb_gadget *gadget) +{ + struct usba_udc *udc = to_usba_udc(gadget); + + return USBA_BFEXT(FRAME_NUMBER, usba_readl(udc, FNUM)); +} + +static int usba_udc_wakeup(struct usb_gadget *gadget) +{ + struct usba_udc *udc = to_usba_udc(gadget); + unsigned long flags; + u32 ctrl; + int ret = -EINVAL; + + spin_lock_irqsave(&udc->lock, flags); + if (udc->devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) { + ctrl = usba_readl(udc, CTRL); + usba_writel(udc, CTRL, ctrl | USBA_REMOTE_WAKE_UP); + ret = 0; + } + spin_unlock_irqrestore(&udc->lock, flags); + + return ret; +} + +static int +usba_udc_set_selfpowered(struct usb_gadget *gadget, int is_selfpowered) +{ + struct usba_udc *udc = to_usba_udc(gadget); + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); + if (is_selfpowered) + udc->devstatus |= 1 << USB_DEVICE_SELF_POWERED; + else + udc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED); + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static const struct usb_gadget_ops usba_udc_ops = { + .get_frame = usba_udc_get_frame, + .wakeup = usba_udc_wakeup, + .set_selfpowered = usba_udc_set_selfpowered, +}; + +#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \ +{ \ + .ep = { \ + .ops = &usba_ep_ops, \ + .name = nam, \ + .maxpacket = maxpkt, \ + }, \ + .udc = &the_udc, \ + .queue = LIST_HEAD_INIT(usba_ep[idx].queue), \ + .fifo_size = maxpkt, \ + .nr_banks = maxbk, \ + .index = idx, \ + .can_dma = dma, \ + .can_isoc = isoc, \ +} + +static struct usba_ep usba_ep[] = { + EP("ep0", 0, 64, 1, 0, 0), + EP("ep1in-bulk", 1, 512, 2, 1, 1), + EP("ep2out-bulk", 2, 512, 2, 1, 1), + EP("ep3in-int", 3, 64, 3, 1, 0), + EP("ep4out-int", 4, 64, 3, 1, 0), + EP("ep5in-iso", 5, 1024, 3, 1, 1), + EP("ep6out-iso", 6, 1024, 3, 1, 1), +}; +#undef EP + +static struct usb_endpoint_descriptor usba_ep0_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = 0, + .bmAttributes = USB_ENDPOINT_XFER_CONTROL, + .wMaxPacketSize = __constant_cpu_to_le16(64), + /* FIXME: I have no idea what to put here */ + .bInterval = 1, +}; + +static void nop_release(struct device *dev) +{ + +} + +static struct usba_udc the_udc = { + .gadget = { + .ops = &usba_udc_ops, + .ep0 = &usba_ep[0].ep, + .ep_list = LIST_HEAD_INIT(the_udc.gadget.ep_list), + .is_dualspeed = 1, + .name = "atmel_usba_udc", + .dev = { + .bus_id = "gadget", + .release = nop_release, + }, + }, + + .lock = SPIN_LOCK_UNLOCKED, +}; + +/* + * Called with interrupts disabled and udc->lock held. + */ +static void reset_all_endpoints(struct usba_udc *udc) +{ + struct usba_ep *ep; + struct usba_request *req, *tmp_req; + + usba_writel(udc, EPT_RST, ~0UL); + + ep = to_usba_ep(udc->gadget.ep0); + list_for_each_entry_safe(req, tmp_req, &ep->queue, queue) { + list_del_init(&req->queue); + request_complete(ep, req, -ECONNRESET); + } + + list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) { + if (ep->desc) { + spin_unlock(&udc->lock); + usba_ep_disable(&ep->ep); + spin_lock(&udc->lock); + } + } +} + +static struct usba_ep *get_ep_by_addr(struct usba_udc *udc, u16 wIndex) +{ + struct usba_ep *ep; + + if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0) + return to_usba_ep(udc->gadget.ep0); + + list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) { + u8 bEndpointAddress; + + if (!ep->desc) + continue; + bEndpointAddress = ep->desc->bEndpointAddress; + if ((wIndex ^ bEndpointAddress) & USB_DIR_IN) + continue; + if ((bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) + == (wIndex & USB_ENDPOINT_NUMBER_MASK)) + return ep; + } + + return NULL; +} + +/* Called with interrupts disabled and udc->lock held */ +static inline void set_protocol_stall(struct usba_udc *udc, struct usba_ep *ep) +{ + usba_ep_writel(ep, SET_STA, USBA_FORCE_STALL); + ep->state = WAIT_FOR_SETUP; +} + +static inline int is_stalled(struct usba_udc *udc, struct usba_ep *ep) +{ + if (usba_ep_readl(ep, STA) & USBA_FORCE_STALL) + return 1; + return 0; +} + +static inline void set_address(struct usba_udc *udc, unsigned int addr) +{ + u32 regval; + + DBG(DBG_BUS, "setting address %u...\n", addr); + regval = usba_readl(udc, CTRL); + regval = USBA_BFINS(DEV_ADDR, addr, regval); + usba_writel(udc, CTRL, regval); +} + +static int do_test_mode(struct usba_udc *udc) +{ + static const char test_packet_buffer[] = { + /* JKJKJKJK * 9 */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* JJKKJJKK * 8 */ + 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, + /* JJKKJJKK * 8 */ + 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, + /* JJJJJJJKKKKKKK * 8 */ + 0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + /* JJJJJJJK * 8 */ + 0x7F, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD, + /* {JKKKKKKK * 10}, JK */ + 0xFC, 0x7E, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD, 0x7E + }; + struct usba_ep *ep; + struct device *dev = &udc->pdev->dev; + int test_mode; + + test_mode = udc->test_mode; + + /* Start from a clean slate */ + reset_all_endpoints(udc); + + switch (test_mode) { + case 0x0100: + /* Test_J */ + usba_writel(udc, TST, USBA_TST_J_MODE); + dev_info(dev, "Entering Test_J mode...\n"); + break; + case 0x0200: + /* Test_K */ + usba_writel(udc, TST, USBA_TST_K_MODE); + dev_info(dev, "Entering Test_K mode...\n"); + break; + case 0x0300: + /* + * Test_SE0_NAK: Force high-speed mode and set up ep0 + * for Bulk IN transfers + */ + ep = &usba_ep[0]; + usba_writel(udc, TST, + USBA_BF(SPEED_CFG, USBA_SPEED_CFG_FORCE_HIGH)); + usba_ep_writel(ep, CFG, + USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64) + | USBA_EPT_DIR_IN + | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK) + | USBA_BF(BK_NUMBER, 1)); + if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) { + set_protocol_stall(udc, ep); + dev_err(dev, "Test_SE0_NAK: ep0 not mapped\n"); + } else { + usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE); + dev_info(dev, "Entering Test_SE0_NAK mode...\n"); + } + break; + case 0x0400: + /* Test_Packet */ + ep = &usba_ep[0]; + usba_ep_writel(ep, CFG, + USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64) + | USBA_EPT_DIR_IN + | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK) + | USBA_BF(BK_NUMBER, 1)); + if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) { + set_protocol_stall(udc, ep); + dev_err(dev, "Test_Packet: ep0 not mapped\n"); + } else { + usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE); + usba_writel(udc, TST, USBA_TST_PKT_MODE); + copy_to_fifo(ep->fifo, test_packet_buffer, + sizeof(test_packet_buffer)); + usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY); + dev_info(dev, "Entering Test_Packet mode...\n"); + } + break; + default: + dev_err(dev, "Invalid test mode: 0x%04x\n", test_mode); + return -EINVAL; + } + + return 0; +} + +/* Avoid overly long expressions */ +static inline bool feature_is_dev_remote_wakeup(struct usb_ctrlrequest *crq) +{ + if (crq->wValue == __constant_cpu_to_le16(USB_DEVICE_REMOTE_WAKEUP)) + return true; + return false; +} + +static inline bool feature_is_dev_test_mode(struct usb_ctrlrequest *crq) +{ + if (crq->wValue == __constant_cpu_to_le16(USB_DEVICE_TEST_MODE)) + return true; + return false; +} + +static inline bool feature_is_ep_halt(struct usb_ctrlrequest *crq) +{ + if (crq->wValue == __constant_cpu_to_le16(USB_ENDPOINT_HALT)) + return true; + return false; +} + +static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep, + struct usb_ctrlrequest *crq) +{ + int retval = 0;; + + switch (crq->bRequest) { + case USB_REQ_GET_STATUS: { + u16 status; + + if (crq->bRequestType == (USB_DIR_IN | USB_RECIP_DEVICE)) { + status = cpu_to_le16(udc->devstatus); + } else if (crq->bRequestType + == (USB_DIR_IN | USB_RECIP_INTERFACE)) { + status = __constant_cpu_to_le16(0); + } else if (crq->bRequestType + == (USB_DIR_IN | USB_RECIP_ENDPOINT)) { + struct usba_ep *target; + + target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex)); + if (!target) + goto stall; + + status = 0; + if (is_stalled(udc, target)) + status |= __constant_cpu_to_le16(1); + } else + goto delegate; + + /* Write directly to the FIFO. No queueing is done. */ + if (crq->wLength != __constant_cpu_to_le16(sizeof(status))) + goto stall; + ep->state = DATA_STAGE_IN; + __raw_writew(status, ep->fifo); + usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY); + break; + } + + case USB_REQ_CLEAR_FEATURE: { + if (crq->bRequestType == USB_RECIP_DEVICE) { + if (feature_is_dev_remote_wakeup(crq)) + udc->devstatus + &= ~(1 << USB_DEVICE_REMOTE_WAKEUP); + else + /* Can't CLEAR_FEATURE TEST_MODE */ + goto stall; + } else if (crq->bRequestType == USB_RECIP_ENDPOINT) { + struct usba_ep *target; + + if (crq->wLength != __constant_cpu_to_le16(0) + || !feature_is_ep_halt(crq)) + goto stall; + target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex)); + if (!target) + goto stall; + + usba_ep_writel(target, CLR_STA, USBA_FORCE_STALL); + if (target->index != 0) + usba_ep_writel(target, CLR_STA, + USBA_TOGGLE_CLR); + } else { + goto delegate; + } + + send_status(udc, ep); + break; + } + + case USB_REQ_SET_FEATURE: { + if (crq->bRequestType == USB_RECIP_DEVICE) { + if (feature_is_dev_test_mode(crq)) { + send_status(udc, ep); + ep->state = STATUS_STAGE_TEST; + udc->test_mode = le16_to_cpu(crq->wIndex); + return 0; + } else if (feature_is_dev_remote_wakeup(crq)) { + udc->devstatus |= 1 << USB_DEVICE_REMOTE_WAKEUP; + } else { + goto stall; + } + } else if (crq->bRequestType == USB_RECIP_ENDPOINT) { + struct usba_ep *target; + + if (crq->wLength != __constant_cpu_to_le16(0) + || !feature_is_ep_halt(crq)) + goto stall; + + target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex)); + if (!target) + goto stall; + + usba_ep_writel(target, SET_STA, USBA_FORCE_STALL); + } else + goto delegate; + + send_status(udc, ep); + break; + } + + case USB_REQ_SET_ADDRESS: + if (crq->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE)) + goto delegate; + + set_address(udc, le16_to_cpu(crq->wValue)); + send_status(udc, ep); + ep->state = STATUS_STAGE_ADDR; + break; + + default: +delegate: + spin_unlock(&udc->lock); + retval = udc->driver->setup(&udc->gadget, crq); + spin_lock(&udc->lock); + } + + return retval; + +stall: + printk(KERN_ERR + "udc: %s: Invalid setup request: %02x.%02x v%04x i%04x l%d, " + "halting endpoint...\n", + ep->ep.name, crq->bRequestType, crq->bRequest, + le16_to_cpu(crq->wValue), le16_to_cpu(crq->wIndex), + le16_to_cpu(crq->wLength)); + set_protocol_stall(udc, ep); + return -1; +} + +static void usba_control_irq(struct usba_udc *udc, struct usba_ep *ep) +{ + struct usba_request *req; + u32 epstatus; + u32 epctrl; + +restart: + epstatus = usba_ep_readl(ep, STA); + epctrl = usba_ep_readl(ep, CTL); + + DBG(DBG_INT, "%s [%d]: s/%08x c/%08x\n", + ep->ep.name, ep->state, epstatus, epctrl); + + req = NULL; + if (!list_empty(&ep->queue)) + req = list_entry(ep->queue.next, + struct usba_request, queue); + + if ((epctrl & USBA_TX_PK_RDY) && !(epstatus & USBA_TX_PK_RDY)) { + if (req->submitted) + next_fifo_transaction(ep, req); + else + submit_request(ep, req); + + if (req->last_transaction) { + usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY); + usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE); + } + goto restart; + } + if ((epstatus & epctrl) & USBA_TX_COMPLETE) { + usba_ep_writel(ep, CLR_STA, USBA_TX_COMPLETE); + + switch (ep->state) { + case DATA_STAGE_IN: + usba_ep_writel(ep, CTL_ENB, USBA_RX_BK_RDY); + usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE); + ep->state = STATUS_STAGE_OUT; + break; + case STATUS_STAGE_ADDR: + /* Activate our new address */ + usba_writel(udc, CTRL, (usba_readl(udc, CTRL) + | USBA_FADDR_EN)); + usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE); + ep->state = WAIT_FOR_SETUP; + break; + case STATUS_STAGE_IN: + if (req) { + list_del_init(&req->queue); + request_complete(ep, req, 0); + submit_next_request(ep); + } + usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE); + ep->state = WAIT_FOR_SETUP; + break; + case STATUS_STAGE_TEST: + usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE); + ep->state = WAIT_FOR_SETUP; + if (do_test_mode(udc)) + set_protocol_stall(udc, ep); + break; + default: + printk(KERN_ERR + "udc: %s: TXCOMP: Invalid endpoint state %d, " + "halting endpoint...\n", + ep->ep.name, ep->state); + set_protocol_stall(udc, ep); + break; + } + + goto restart; + } + if ((epstatus & epctrl) & USBA_RX_BK_RDY) { + switch (ep->state) { + case STATUS_STAGE_OUT: + usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY); + usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY); + + if (req) { + list_del_init(&req->queue); + request_complete(ep, req, 0); + } + ep->state = WAIT_FOR_SETUP; + break; + + case DATA_STAGE_OUT: + receive_data(ep); + break; + + default: + usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY); + usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY); + printk(KERN_ERR + "udc: %s: RXRDY: Invalid endpoint state %d, " + "halting endpoint...\n", + ep->ep.name, ep->state); + set_protocol_stall(udc, ep); + break; + } + + goto restart; + } + if (epstatus & USBA_RX_SETUP) { + union { + struct usb_ctrlrequest crq; + unsigned long data[2]; + } crq; + unsigned int pkt_len; + int ret; + + if (ep->state != WAIT_FOR_SETUP) { + /* + * Didn't expect a SETUP packet at this + * point. Clean up any pending requests (which + * may be successful). + */ + int status = -EPROTO; + + /* + * RXRDY and TXCOMP are dropped when SETUP + * packets arrive. Just pretend we received + * the status packet. + */ + if (ep->state == STATUS_STAGE_OUT + || ep->state == STATUS_STAGE_IN) { + usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY); + status = 0; + } + + if (req) { + list_del_init(&req->queue); + request_complete(ep, req, status); + } + } + + pkt_len = USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA)); + DBG(DBG_HW, "Packet length: %u\n", pkt_len); + if (pkt_len != sizeof(crq)) { + printk(KERN_WARNING "udc: Invalid packet length %u " + "(expected %lu)\n", pkt_len, sizeof(crq)); + set_protocol_stall(udc, ep); + return; + } + + DBG(DBG_FIFO, "Copying ctrl request from 0x%p:\n", ep->fifo); + copy_from_fifo(crq.data, ep->fifo, sizeof(crq)); + + /* Free up one bank in the FIFO so that we can + * generate or receive a reply right away. */ + usba_ep_writel(ep, CLR_STA, USBA_RX_SETUP); + + /* printk(KERN_DEBUG "setup: %d: %02x.%02x\n", + ep->state, crq.crq.bRequestType, + crq.crq.bRequest); */ + + if (crq.crq.bRequestType & USB_DIR_IN) { + /* + * The USB 2.0 spec states that "if wLength is + * zero, there is no data transfer phase." + * However, testusb #14 seems to actually + * expect a data phase even if wLength = 0... + */ + ep->state = DATA_STAGE_IN; + } else { + if (crq.crq.wLength != __constant_cpu_to_le16(0)) + ep->state = DATA_STAGE_OUT; + else + ep->state = STATUS_STAGE_IN; + } + + ret = -1; + if (ep->index == 0) + ret = handle_ep0_setup(udc, ep, &crq.crq); + else { + spin_unlock(&udc->lock); + ret = udc->driver->setup(&udc->gadget, &crq.crq); + spin_lock(&udc->lock); + } + + DBG(DBG_BUS, "req %02x.%02x, length %d, state %d, ret %d\n", + crq.crq.bRequestType, crq.crq.bRequest, + le16_to_cpu(crq.crq.wLength), ep->state, ret); + + if (ret < 0) { + /* Let the host know that we failed */ + set_protocol_stall(udc, ep); + } + } +} + +static void usba_ep_irq(struct usba_udc *udc, struct usba_ep *ep) +{ + struct usba_request *req; + u32 epstatus; + u32 epctrl; + + epstatus = usba_ep_readl(ep, STA); + epctrl = usba_ep_readl(ep, CTL); + + DBG(DBG_INT, "%s: interrupt, status: 0x%08x\n", ep->ep.name, epstatus); + + while ((epctrl & USBA_TX_PK_RDY) && !(epstatus & USBA_TX_PK_RDY)) { + DBG(DBG_BUS, "%s: TX PK ready\n", ep->ep.name); + + if (list_empty(&ep->queue)) { + dev_warn(&udc->pdev->dev, "ep_irq: queue empty\n"); + usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY); + return; + } + + req = list_entry(ep->queue.next, struct usba_request, queue); + + if (req->using_dma) { + /* Send a zero-length packet */ + usba_ep_writel(ep, SET_STA, + USBA_TX_PK_RDY); + usba_ep_writel(ep, CTL_DIS, + USBA_TX_PK_RDY); + list_del_init(&req->queue); + submit_next_request(ep); + request_complete(ep, req, 0); + } else { + if (req->submitted) + next_fifo_transaction(ep, req); + else + submit_request(ep, req); + + if (req->last_transaction) { + list_del_init(&req->queue); + submit_next_request(ep); + request_complete(ep, req, 0); + } + } + + epstatus = usba_ep_readl(ep, STA); + epctrl = usba_ep_readl(ep, CTL); + } + if ((epstatus & epctrl) & USBA_RX_BK_RDY) { + DBG(DBG_BUS, "%s: RX data ready\n", ep->ep.name); + receive_data(ep); + usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY); + } +} + +static void usba_dma_irq(struct usba_udc *udc, struct usba_ep *ep) +{ + struct usba_request *req; + u32 status, control, pending; + + status = usba_dma_readl(ep, STATUS); + control = usba_dma_readl(ep, CONTROL); +#ifdef CONFIG_USB_GADGET_DEBUG_FS + ep->last_dma_status = status; +#endif + pending = status & control; + DBG(DBG_INT | DBG_DMA, "dma irq, s/%#08x, c/%#08x\n", status, control); + + if (status & USBA_DMA_CH_EN) { + dev_err(&udc->pdev->dev, + "DMA_CH_EN is set after transfer is finished!\n"); + dev_err(&udc->pdev->dev, + "status=%#08x, pending=%#08x, control=%#08x\n", + status, pending, control); + + /* + * try to pretend nothing happened. We might have to + * do something here... + */ + } + + if (list_empty(&ep->queue)) + /* Might happen if a reset comes along at the right moment */ + return; + + if (pending & (USBA_DMA_END_TR_ST | USBA_DMA_END_BUF_ST)) { + req = list_entry(ep->queue.next, struct usba_request, queue); + usba_update_req(ep, req, status); + + list_del_init(&req->queue); + submit_next_request(ep); + request_complete(ep, req, 0); + } +} + +static irqreturn_t usba_udc_irq(int irq, void *devid) +{ + struct usba_udc *udc = devid; + u32 status; + u32 dma_status; + u32 ep_status; + + spin_lock(&udc->lock); + + status = usba_readl(udc, INT_STA); + DBG(DBG_INT, "irq, status=%#08x\n", status); + + if (status & USBA_DET_SUSPEND) { + usba_writel(udc, INT_CLR, USBA_DET_SUSPEND); + DBG(DBG_BUS, "Suspend detected\n"); + if (udc->gadget.speed != USB_SPEED_UNKNOWN + && udc->driver && udc->driver->suspend) { + spin_unlock(&udc->lock); + udc->driver->suspend(&udc->gadget); + spin_lock(&udc->lock); + } + } + + if (status & USBA_WAKE_UP) { + usba_writel(udc, INT_CLR, USBA_WAKE_UP); + DBG(DBG_BUS, "Wake Up CPU detected\n"); + } + + if (status & USBA_END_OF_RESUME) { + usba_writel(udc, INT_CLR, USBA_END_OF_RESUME); + DBG(DBG_BUS, "Resume detected\n"); + if (udc->gadget.speed != USB_SPEED_UNKNOWN + && udc->driver && udc->driver->resume) { + spin_unlock(&udc->lock); + udc->driver->resume(&udc->gadget); + spin_lock(&udc->lock); + } + } + + dma_status = USBA_BFEXT(DMA_INT, status); + if (dma_status) { + int i; + + for (i = 1; i < USBA_NR_ENDPOINTS; i++) + if (dma_status & (1 << i)) + usba_dma_irq(udc, &usba_ep[i]); + } + + ep_status = USBA_BFEXT(EPT_INT, status); + if (ep_status) { + int i; + + for (i = 0; i < USBA_NR_ENDPOINTS; i++) + if (ep_status & (1 << i)) { + if (ep_is_control(&usba_ep[i])) + usba_control_irq(udc, &usba_ep[i]); + else + usba_ep_irq(udc, &usba_ep[i]); + } + } + + if (status & USBA_END_OF_RESET) { + struct usba_ep *ep0; + + usba_writel(udc, INT_CLR, USBA_END_OF_RESET); + reset_all_endpoints(udc); + + if (status & USBA_HIGH_SPEED) { + DBG(DBG_BUS, "High-speed bus reset detected\n"); + udc->gadget.speed = USB_SPEED_HIGH; + } else { + DBG(DBG_BUS, "Full-speed bus reset detected\n"); + udc->gadget.speed = USB_SPEED_FULL; + } + + ep0 = &usba_ep[0]; + ep0->desc = &usba_ep0_desc; + ep0->state = WAIT_FOR_SETUP; + usba_ep_writel(ep0, CFG, + (USBA_BF(EPT_SIZE, EP0_EPT_SIZE) + | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL) + | USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE))); + usba_ep_writel(ep0, CTL_ENB, + USBA_EPT_ENABLE | USBA_RX_SETUP); + usba_writel(udc, INT_ENB, + (usba_readl(udc, INT_ENB) + | USBA_BF(EPT_INT, 1) + | USBA_DET_SUSPEND + | USBA_END_OF_RESUME)); + + if (!(usba_ep_readl(ep0, CFG) & USBA_EPT_MAPPED)) + dev_warn(&udc->pdev->dev, + "WARNING: EP0 configuration is invalid!\n"); + } + + spin_unlock(&udc->lock); + + return IRQ_HANDLED; +} + +static irqreturn_t usba_vbus_irq(int irq, void *devid) +{ + struct usba_udc *udc = devid; + int vbus; + + /* debounce */ + udelay(10); + + spin_lock(&udc->lock); + + /* May happen if Vbus pin toggles during probe() */ + if (!udc->driver) + goto out; + + vbus = gpio_get_value(udc->vbus_pin); + if (vbus != udc->vbus_prev) { + if (vbus) { + usba_writel(udc, CTRL, USBA_EN_USBA); + usba_writel(udc, INT_ENB, USBA_END_OF_RESET); + } else { + udc->gadget.speed = USB_SPEED_UNKNOWN; + reset_all_endpoints(udc); + usba_writel(udc, CTRL, 0); + spin_unlock(&udc->lock); + udc->driver->disconnect(&udc->gadget); + spin_lock(&udc->lock); + } + udc->vbus_prev = vbus; + } + +out: + spin_unlock(&udc->lock); + + return IRQ_HANDLED; +} + +int usb_gadget_register_driver(struct usb_gadget_driver *driver) +{ + struct usba_udc *udc = &the_udc; + unsigned long flags; + int ret; + + if (!udc->pdev) + return -ENODEV; + + spin_lock_irqsave(&udc->lock, flags); + if (udc->driver) { + spin_unlock_irqrestore(&udc->lock, flags); + return -EBUSY; + } + + udc->devstatus = 1 << USB_DEVICE_SELF_POWERED; + udc->driver = driver; + udc->gadget.dev.driver = &driver->driver; + spin_unlock_irqrestore(&udc->lock, flags); + + clk_enable(udc->pclk); + clk_enable(udc->hclk); + + ret = driver->bind(&udc->gadget); + if (ret) { + DBG(DBG_ERR, "Could not bind to driver %s: error %d\n", + driver->driver.name, ret); + goto err_driver_bind; + } + + DBG(DBG_GADGET, "registered driver `%s'\n", driver->driver.name); + + udc->vbus_prev = 0; + if (udc->vbus_pin != -1) + enable_irq(gpio_to_irq(udc->vbus_pin)); + + /* If Vbus is present, enable the controller and wait for reset */ + spin_lock_irqsave(&udc->lock, flags); + if (vbus_is_present(udc) && udc->vbus_prev == 0) { + usba_writel(udc, CTRL, USBA_EN_USBA); + usba_writel(udc, INT_ENB, USBA_END_OF_RESET); + } + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; + +err_driver_bind: + udc->driver = NULL; + udc->gadget.dev.driver = NULL; + return ret; +} +EXPORT_SYMBOL(usb_gadget_register_driver); + +int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) +{ + struct usba_udc *udc = &the_udc; + unsigned long flags; + + if (!udc->pdev) + return -ENODEV; + if (driver != udc->driver) + return -EINVAL; + + if (udc->vbus_pin != -1) + disable_irq(gpio_to_irq(udc->vbus_pin)); + + spin_lock_irqsave(&udc->lock, flags); + udc->gadget.speed = USB_SPEED_UNKNOWN; + reset_all_endpoints(udc); + spin_unlock_irqrestore(&udc->lock, flags); + + /* This will also disable the DP pullup */ + usba_writel(udc, CTRL, 0); + + driver->unbind(&udc->gadget); + udc->gadget.dev.driver = NULL; + udc->driver = NULL; + + clk_disable(udc->hclk); + clk_disable(udc->pclk); + + DBG(DBG_GADGET, "unregistered driver `%s'\n", driver->driver.name); + + return 0; +} +EXPORT_SYMBOL(usb_gadget_unregister_driver); + +static int __init usba_udc_probe(struct platform_device *pdev) +{ + struct usba_platform_data *pdata = pdev->dev.platform_data; + struct resource *regs, *fifo; + struct clk *pclk, *hclk; + struct usba_udc *udc = &the_udc; + int irq, ret, i; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID); + fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID); + if (!regs || !fifo) + return -ENXIO; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + pclk = clk_get(&pdev->dev, "pclk"); + if (IS_ERR(pclk)) + return PTR_ERR(pclk); + hclk = clk_get(&pdev->dev, "hclk"); + if (IS_ERR(hclk)) { + ret = PTR_ERR(hclk); + goto err_get_hclk; + } + + udc->pdev = pdev; + udc->pclk = pclk; + udc->hclk = hclk; + udc->vbus_pin = -1; + + ret = -ENOMEM; + udc->regs = ioremap(regs->start, regs->end - regs->start + 1); + if (!udc->regs) { + dev_err(&pdev->dev, "Unable to map I/O memory, aborting.\n"); + goto err_map_regs; + } + dev_info(&pdev->dev, "MMIO registers at 0x%08lx mapped at %p\n", + (unsigned long)regs->start, udc->regs); + udc->fifo = ioremap(fifo->start, fifo->end - fifo->start + 1); + if (!udc->fifo) { + dev_err(&pdev->dev, "Unable to map FIFO, aborting.\n"); + goto err_map_fifo; + } + dev_info(&pdev->dev, "FIFO at 0x%08lx mapped at %p\n", + (unsigned long)fifo->start, udc->fifo); + + device_initialize(&udc->gadget.dev); + udc->gadget.dev.parent = &pdev->dev; + udc->gadget.dev.dma_mask = pdev->dev.dma_mask; + + platform_set_drvdata(pdev, udc); + + /* Make sure we start from a clean slate */ + clk_enable(pclk); + usba_writel(udc, CTRL, 0); + clk_disable(pclk); + + INIT_LIST_HEAD(&usba_ep[0].ep.ep_list); + usba_ep[0].ep_regs = udc->regs + USBA_EPT_BASE(0); + usba_ep[0].dma_regs = udc->regs + USBA_DMA_BASE(0); + usba_ep[0].fifo = udc->fifo + USBA_FIFO_BASE(0); + for (i = 1; i < ARRAY_SIZE(usba_ep); i++) { + struct usba_ep *ep = &usba_ep[i]; + + ep->ep_regs = udc->regs + USBA_EPT_BASE(i); + ep->dma_regs = udc->regs + USBA_DMA_BASE(i); + ep->fifo = udc->fifo + USBA_FIFO_BASE(i); + + list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); + } + + ret = request_irq(irq, usba_udc_irq, 0, "atmel_usba_udc", udc); + if (ret) { + dev_err(&pdev->dev, "Cannot request irq %d (error %d)\n", + irq, ret); + goto err_request_irq; + } + udc->irq = irq; + + ret = device_add(&udc->gadget.dev); + if (ret) { + dev_dbg(&pdev->dev, "Could not add gadget: %d\n", ret); + goto err_device_add; + } + + if (pdata && pdata->vbus_pin != GPIO_PIN_NONE) { + if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) { + udc->vbus_pin = pdata->vbus_pin; + + ret = request_irq(gpio_to_irq(udc->vbus_pin), + usba_vbus_irq, 0, + "atmel_usba_udc", udc); + if (ret) { + gpio_free(udc->vbus_pin); + udc->vbus_pin = -1; + dev_warn(&udc->pdev->dev, + "failed to request vbus irq; " + "assuming always on\n"); + } else { + disable_irq(gpio_to_irq(udc->vbus_pin)); + } + } + } + + usba_init_debugfs(udc); + for (i = 1; i < ARRAY_SIZE(usba_ep); i++) + usba_ep_init_debugfs(udc, &usba_ep[i]); + + return 0; + +err_device_add: + free_irq(irq, udc); +err_request_irq: + iounmap(udc->fifo); +err_map_fifo: + iounmap(udc->regs); +err_map_regs: + clk_put(hclk); +err_get_hclk: + clk_put(pclk); + + platform_set_drvdata(pdev, NULL); + + return ret; +} + +static int __exit usba_udc_remove(struct platform_device *pdev) +{ + struct usba_udc *udc; + int i; + + udc = platform_get_drvdata(pdev); + + for (i = 1; i < ARRAY_SIZE(usba_ep); i++) + usba_ep_cleanup_debugfs(&usba_ep[i]); + usba_cleanup_debugfs(udc); + + if (udc->vbus_pin != -1) + gpio_free(udc->vbus_pin); + + free_irq(udc->irq, udc); + iounmap(udc->fifo); + iounmap(udc->regs); + clk_put(udc->hclk); + clk_put(udc->pclk); + + device_unregister(&udc->gadget.dev); + + return 0; +} + +static struct platform_driver udc_driver = { + .remove = __exit_p(usba_udc_remove), + .driver = { + .name = "atmel_usba_udc", + }, +}; + +static int __init udc_init(void) +{ + return platform_driver_probe(&udc_driver, usba_udc_probe); +} +module_init(udc_init); + +static void __exit udc_exit(void) +{ + platform_driver_unregister(&udc_driver); +} +module_exit(udc_exit); + +MODULE_DESCRIPTION("Atmel USBA UDC driver"); +MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h new file mode 100644 index 00000000000..a68304e31a6 --- /dev/null +++ b/drivers/usb/gadget/atmel_usba_udc.h @@ -0,0 +1,352 @@ +/* + * Driver for the Atmel USBA high speed USB device controller + * + * Copyright (C) 2005-2007 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __LINUX_USB_GADGET_USBA_UDC_H__ +#define __LINUX_USB_GADGET_USBA_UDC_H__ + +/* USB register offsets */ +#define USBA_CTRL 0x0000 +#define USBA_FNUM 0x0004 +#define USBA_INT_ENB 0x0010 +#define USBA_INT_STA 0x0014 +#define USBA_INT_CLR 0x0018 +#define USBA_EPT_RST 0x001c +#define USBA_TST 0x00e0 + +/* USB endpoint register offsets */ +#define USBA_EPT_CFG 0x0000 +#define USBA_EPT_CTL_ENB 0x0004 +#define USBA_EPT_CTL_DIS 0x0008 +#define USBA_EPT_CTL 0x000c +#define USBA_EPT_SET_STA 0x0014 +#define USBA_EPT_CLR_STA 0x0018 +#define USBA_EPT_STA 0x001c + +/* USB DMA register offsets */ +#define USBA_DMA_NXT_DSC 0x0000 +#define USBA_DMA_ADDRESS 0x0004 +#define USBA_DMA_CONTROL 0x0008 +#define USBA_DMA_STATUS 0x000c + +/* Bitfields in CTRL */ +#define USBA_DEV_ADDR_OFFSET 0 +#define USBA_DEV_ADDR_SIZE 7 +#define USBA_FADDR_EN (1 << 7) +#define USBA_EN_USBA (1 << 8) +#define USBA_DETACH (1 << 9) +#define USBA_REMOTE_WAKE_UP (1 << 10) + +/* Bitfields in FNUM */ +#define USBA_MICRO_FRAME_NUM_OFFSET 0 +#define USBA_MICRO_FRAME_NUM_SIZE 3 +#define USBA_FRAME_NUMBER_OFFSET 3 +#define USBA_FRAME_NUMBER_SIZE 11 +#define USBA_FRAME_NUM_ERROR (1 << 31) + +/* Bitfields in INT_ENB/INT_STA/INT_CLR */ +#define USBA_HIGH_SPEED (1 << 0) +#define USBA_DET_SUSPEND (1 << 1) +#define USBA_MICRO_SOF (1 << 2) +#define USBA_SOF (1 << 3) +#define USBA_END_OF_RESET (1 << 4) +#define USBA_WAKE_UP (1 << 5) +#define USBA_END_OF_RESUME (1 << 6) +#define USBA_UPSTREAM_RESUME (1 << 7) +#define USBA_EPT_INT_OFFSET 8 +#define USBA_EPT_INT_SIZE 16 +#define USBA_DMA_INT_OFFSET 24 +#define USBA_DMA_INT_SIZE 8 + +/* Bitfields in EPT_RST */ +#define USBA_RST_OFFSET 0 +#define USBA_RST_SIZE 16 + +/* Bitfields in USBA_TST */ +#define USBA_SPEED_CFG_OFFSET 0 +#define USBA_SPEED_CFG_SIZE 2 +#define USBA_TST_J_MODE (1 << 2) +#define USBA_TST_K_MODE (1 << 3) +#define USBA_TST_PKT_MODE (1 << 4) +#define USBA_OPMODE2 (1 << 5) + +/* Bitfields in EPT_CFG */ +#define USBA_EPT_SIZE_OFFSET 0 +#define USBA_EPT_SIZE_SIZE 3 +#define USBA_EPT_DIR_IN (1 << 3) +#define USBA_EPT_TYPE_OFFSET 4 +#define USBA_EPT_TYPE_SIZE 2 +#define USBA_BK_NUMBER_OFFSET 6 +#define USBA_BK_NUMBER_SIZE 2 +#define USBA_NB_TRANS_OFFSET 8 +#define USBA_NB_TRANS_SIZE 2 +#define USBA_EPT_MAPPED (1 << 31) + +/* Bitfields in EPT_CTL/EPT_CTL_ENB/EPT_CTL_DIS */ +#define USBA_EPT_ENABLE (1 << 0) +#define USBA_AUTO_VALID (1 << 1) +#define USBA_INTDIS_DMA (1 << 3) +#define USBA_NYET_DIS (1 << 4) +#define USBA_DATAX_RX (1 << 6) +#define USBA_MDATA_RX (1 << 7) +/* Bits 8-15 and 31 enable interrupts for respective bits in EPT_STA */ +#define USBA_BUSY_BANK_IE (1 << 18) + +/* Bitfields in EPT_SET_STA/EPT_CLR_STA/EPT_STA */ +#define USBA_FORCE_STALL (1 << 5) +#define USBA_TOGGLE_CLR (1 << 6) +#define USBA_TOGGLE_SEQ_OFFSET 6 +#define USBA_TOGGLE_SEQ_SIZE 2 +#define USBA_ERR_OVFLW (1 << 8) +#define USBA_RX_BK_RDY (1 << 9) +#define USBA_KILL_BANK (1 << 9) +#define USBA_TX_COMPLETE (1 << 10) +#define USBA_TX_PK_RDY (1 << 11) +#define USBA_ISO_ERR_TRANS (1 << 11) +#define USBA_RX_SETUP (1 << 12) +#define USBA_ISO_ERR_FLOW (1 << 12) +#define USBA_STALL_SENT (1 << 13) +#define USBA_ISO_ERR_CRC (1 << 13) +#define USBA_ISO_ERR_NBTRANS (1 << 13) +#define USBA_NAK_IN (1 << 14) +#define USBA_ISO_ERR_FLUSH (1 << 14) +#define USBA_NAK_OUT (1 << 15) +#define USBA_CURRENT_BANK_OFFSET 16 +#define USBA_CURRENT_BANK_SIZE 2 +#define USBA_BUSY_BANKS_OFFSET 18 +#define USBA_BUSY_BANKS_SIZE 2 +#define USBA_BYTE_COUNT_OFFSET 20 +#define USBA_BYTE_COUNT_SIZE 11 +#define USBA_SHORT_PACKET (1 << 31) + +/* Bitfields in DMA_CONTROL */ +#define USBA_DMA_CH_EN (1 << 0) +#define USBA_DMA_LINK (1 << 1) +#define USBA_DMA_END_TR_EN (1 << 2) +#define USBA_DMA_END_BUF_EN (1 << 3) +#define USBA_DMA_END_TR_IE (1 << 4) +#define USBA_DMA_END_BUF_IE (1 << 5) +#define USBA_DMA_DESC_LOAD_IE (1 << 6) +#define USBA_DMA_BURST_LOCK (1 << 7) +#define USBA_DMA_BUF_LEN_OFFSET 16 +#define USBA_DMA_BUF_LEN_SIZE 16 + +/* Bitfields in DMA_STATUS */ +#define USBA_DMA_CH_ACTIVE (1 << 1) +#define USBA_DMA_END_TR_ST (1 << 4) +#define USBA_DMA_END_BUF_ST (1 << 5) +#define USBA_DMA_DESC_LOAD_ST (1 << 6) + +/* Constants for SPEED_CFG */ +#define USBA_SPEED_CFG_NORMAL 0 +#define USBA_SPEED_CFG_FORCE_HIGH 2 +#define USBA_SPEED_CFG_FORCE_FULL 3 + +/* Constants for EPT_SIZE */ +#define USBA_EPT_SIZE_8 0 +#define USBA_EPT_SIZE_16 1 +#define USBA_EPT_SIZE_32 2 +#define USBA_EPT_SIZE_64 3 +#define USBA_EPT_SIZE_128 4 +#define USBA_EPT_SIZE_256 5 +#define USBA_EPT_SIZE_512 6 +#define USBA_EPT_SIZE_1024 7 + +/* Constants for EPT_TYPE */ +#define USBA_EPT_TYPE_CONTROL 0 +#define USBA_EPT_TYPE_ISO 1 +#define USBA_EPT_TYPE_BULK 2 +#define USBA_EPT_TYPE_INT 3 + +/* Constants for BK_NUMBER */ +#define USBA_BK_NUMBER_ZERO 0 +#define USBA_BK_NUMBER_ONE 1 +#define USBA_BK_NUMBER_DOUBLE 2 +#define USBA_BK_NUMBER_TRIPLE 3 + +/* Bit manipulation macros */ +#define USBA_BF(name, value) \ + (((value) & ((1 << USBA_##name##_SIZE) - 1)) \ + << USBA_##name##_OFFSET) +#define USBA_BFEXT(name, value) \ + (((value) >> USBA_##name##_OFFSET) \ + & ((1 << USBA_##name##_SIZE) - 1)) +#define USBA_BFINS(name, value, old) \ + (((old) & ~(((1 << USBA_##name##_SIZE) - 1) \ + << USBA_##name##_OFFSET)) \ + | USBA_BF(name, value)) + +/* Register access macros */ +#define usba_readl(udc, reg) \ + __raw_readl((udc)->regs + USBA_##reg) +#define usba_writel(udc, reg, value) \ + __raw_writel((value), (udc)->regs + USBA_##reg) +#define usba_ep_readl(ep, reg) \ + __raw_readl((ep)->ep_regs + USBA_EPT_##reg) +#define usba_ep_writel(ep, reg, value) \ + __raw_writel((value), (ep)->ep_regs + USBA_EPT_##reg) +#define usba_dma_readl(ep, reg) \ + __raw_readl((ep)->dma_regs + USBA_DMA_##reg) +#define usba_dma_writel(ep, reg, value) \ + __raw_writel((value), (ep)->dma_regs + USBA_DMA_##reg) + +/* Calculate base address for a given endpoint or DMA controller */ +#define USBA_EPT_BASE(x) (0x100 + (x) * 0x20) +#define USBA_DMA_BASE(x) (0x300 + (x) * 0x10) +#define USBA_FIFO_BASE(x) ((x) << 16) + +/* Synth parameters */ +#define USBA_NR_ENDPOINTS 7 + +#define EP0_FIFO_SIZE 64 +#define EP0_EPT_SIZE USBA_EPT_SIZE_64 +#define EP0_NR_BANKS 1 + +/* + * REVISIT: Try to eliminate this value. Can we rely on req->mapped to + * provide this information? + */ +#define DMA_ADDR_INVALID (~(dma_addr_t)0) + +#define FIFO_IOMEM_ID 0 +#define CTRL_IOMEM_ID 1 + +#ifdef DEBUG +#define DBG_ERR 0x0001 /* report all error returns */ +#define DBG_HW 0x0002 /* debug hardware initialization */ +#define DBG_GADGET 0x0004 /* calls to/from gadget driver */ +#define DBG_INT 0x0008 /* interrupts */ +#define DBG_BUS 0x0010 /* report changes in bus state */ +#define DBG_QUEUE 0x0020 /* debug request queue processing */ +#define DBG_FIFO 0x0040 /* debug FIFO contents */ +#define DBG_DMA 0x0080 /* debug DMA handling */ +#define DBG_REQ 0x0100 /* print out queued request length */ +#define DBG_ALL 0xffff +#define DBG_NONE 0x0000 + +#define DEBUG_LEVEL (DBG_ERR) +#define DBG(level, fmt, ...) \ + do { \ + if ((level) & DEBUG_LEVEL) \ + printk(KERN_DEBUG "udc: " fmt, ## __VA_ARGS__); \ + } while (0) +#else +#define DBG(level, fmt...) +#endif + +enum usba_ctrl_state { + WAIT_FOR_SETUP, + DATA_STAGE_IN, + DATA_STAGE_OUT, + STATUS_STAGE_IN, + STATUS_STAGE_OUT, + STATUS_STAGE_ADDR, + STATUS_STAGE_TEST, +}; +/* + EP_STATE_IDLE, + EP_STATE_SETUP, + EP_STATE_IN_DATA, + EP_STATE_OUT_DATA, + EP_STATE_SET_ADDR_STATUS, + EP_STATE_RX_STATUS, + EP_STATE_TX_STATUS, + EP_STATE_HALT, +*/ + +struct usba_dma_desc { + dma_addr_t next; + dma_addr_t addr; + u32 ctrl; +}; + +struct usba_ep { + int state; + void __iomem *ep_regs; + void __iomem *dma_regs; + void __iomem *fifo; + struct usb_ep ep; + struct usba_udc *udc; + + struct list_head queue; + const struct usb_endpoint_descriptor *desc; + + u16 fifo_size; + u8 nr_banks; + u8 index; + unsigned int can_dma:1; + unsigned int can_isoc:1; + unsigned int is_isoc:1; + unsigned int is_in:1; + +#ifdef CONFIG_USB_GADGET_DEBUG_FS + u32 last_dma_status; + struct dentry *debugfs_dir; + struct dentry *debugfs_queue; + struct dentry *debugfs_dma_status; + struct dentry *debugfs_state; +#endif +}; + +struct usba_request { + struct usb_request req; + struct list_head queue; + + u32 ctrl; + + unsigned int submitted:1; + unsigned int last_transaction:1; + unsigned int using_dma:1; + unsigned int mapped:1; +}; + +struct usba_udc { + /* Protect hw registers from concurrent modifications */ + spinlock_t lock; + + void __iomem *regs; + void __iomem *fifo; + + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + struct platform_device *pdev; + int irq; + int vbus_pin; + struct clk *pclk; + struct clk *hclk; + + u16 devstatus; + + u16 test_mode; + int vbus_prev; + +#ifdef CONFIG_USB_GADGET_DEBUG_FS + struct dentry *debugfs_root; + struct dentry *debugfs_regs; +#endif +}; + +static inline struct usba_ep *to_usba_ep(struct usb_ep *ep) +{ + return container_of(ep, struct usba_ep, ep); +} + +static inline struct usba_request *to_usba_req(struct usb_request *req) +{ + return container_of(req, struct usba_request, req); +} + +static inline struct usba_udc *to_usba_udc(struct usb_gadget *gadget) +{ + return container_of(gadget, struct usba_udc, gadget); +} + +#define ep_is_control(ep) ((ep)->index == 0) +#define ep_is_idle(ep) ((ep)->state == EP_STATE_IDLE) + +#endif /* __LINUX_USB_GADGET_USBA_UDC_H */ diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c index c6760aee1e5..a4e54b2743f 100644 --- a/drivers/usb/gadget/config.c +++ b/drivers/usb/gadget/config.c @@ -25,7 +25,7 @@ #include <linux/device.h> #include <linux/usb/ch9.h> -#include <linux/usb_gadget.h> +#include <linux/usb/gadget.h> /** diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index d008d1360a7..9db2482bdfa 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -46,7 +46,7 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/usb.h> -#include <linux/usb_gadget.h> +#include <linux/usb/gadget.h> #include <asm/byteorder.h> #include <asm/io.h> @@ -962,13 +962,13 @@ static struct platform_driver dummy_udc_driver = { static int dummy_urb_enqueue ( struct usb_hcd *hcd, - struct usb_host_endpoint *ep, struct urb *urb, gfp_t mem_flags ) { struct dummy *dum; struct urbp *urbp; unsigned long flags; + int rc; if (!urb->transfer_buffer && urb->transfer_buffer_length) return -EINVAL; @@ -980,6 +980,11 @@ static int dummy_urb_enqueue ( dum = hcd_to_dummy (hcd); spin_lock_irqsave (&dum->lock, flags); + rc = usb_hcd_link_urb_to_ep(hcd, urb); + if (rc) { + kfree(urbp); + goto done; + } if (!dum->udev) { dum->udev = urb->dev; @@ -996,36 +1001,35 @@ static int dummy_urb_enqueue ( if (!timer_pending (&dum->timer)) mod_timer (&dum->timer, jiffies + 1); - spin_unlock_irqrestore (&dum->lock, flags); - return 0; + done: + spin_unlock_irqrestore(&dum->lock, flags); + return rc; } -static int dummy_urb_dequeue (struct usb_hcd *hcd, struct urb *urb) +static int dummy_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) { struct dummy *dum; unsigned long flags; + int rc; /* giveback happens automatically in timer callback, * so make sure the callback happens */ dum = hcd_to_dummy (hcd); spin_lock_irqsave (&dum->lock, flags); - if (dum->rh_state != DUMMY_RH_RUNNING && !list_empty(&dum->urbp_list)) + + rc = usb_hcd_check_unlink_urb(hcd, urb, status); + if (!rc && dum->rh_state != DUMMY_RH_RUNNING && + !list_empty(&dum->urbp_list)) mod_timer (&dum->timer, jiffies); - spin_unlock_irqrestore (&dum->lock, flags); - return 0; -} -static void maybe_set_status (struct urb *urb, int status) -{ - spin_lock (&urb->lock); - if (urb->status == -EINPROGRESS) - urb->status = status; - spin_unlock (&urb->lock); + spin_unlock_irqrestore (&dum->lock, flags); + return rc; } /* transfer up to a frame's worth; caller must own lock */ static int -transfer (struct dummy *dum, struct urb *urb, struct dummy_ep *ep, int limit) +transfer(struct dummy *dum, struct urb *urb, struct dummy_ep *ep, int limit, + int *status) { struct dummy_request *req; @@ -1088,24 +1092,20 @@ top: * * partially filling a buffer optionally blocks queue advances * (so completion handlers can clean up the queue) but we don't - * need to emulate such data-in-flight. so we only show part - * of the URB_SHORT_NOT_OK effect: completion status. + * need to emulate such data-in-flight. */ if (is_short) { if (host_len == dev_len) { req->req.status = 0; - maybe_set_status (urb, 0); + *status = 0; } else if (to_host) { req->req.status = 0; if (dev_len > host_len) - maybe_set_status (urb, -EOVERFLOW); + *status = -EOVERFLOW; else - maybe_set_status (urb, - (urb->transfer_flags - & URB_SHORT_NOT_OK) - ? -EREMOTEIO : 0); + *status = 0; } else if (!to_host) { - maybe_set_status (urb, 0); + *status = 0; if (host_len > dev_len) req->req.status = -EOVERFLOW; else @@ -1119,9 +1119,8 @@ top: req->req.status = 0; if (urb->transfer_buffer_length == urb->actual_length && !(urb->transfer_flags - & URB_ZERO_PACKET)) { - maybe_set_status (urb, 0); - } + & URB_ZERO_PACKET)) + *status = 0; } /* device side completion --> continuable */ @@ -1137,7 +1136,7 @@ top: } /* host side completion --> terminate */ - if (urb->status != -EINPROGRESS) + if (*status != -EINPROGRESS) break; /* rescan to continue with any other queued i/o */ @@ -1248,12 +1247,12 @@ restart: u8 address; struct dummy_ep *ep = NULL; int type; + int status = -EINPROGRESS; urb = urbp->urb; - if (urb->status != -EINPROGRESS) { - /* likely it was just unlinked */ + if (urb->unlinked) goto return_urb; - } else if (dum->rh_state != DUMMY_RH_RUNNING) + else if (dum->rh_state != DUMMY_RH_RUNNING) continue; type = usb_pipetype (urb->pipe); @@ -1274,7 +1273,7 @@ restart: dev_dbg (dummy_dev(dum), "no ep configured for urb %p\n", urb); - maybe_set_status (urb, -EPROTO); + status = -EPROTO; goto return_urb; } @@ -1289,7 +1288,7 @@ restart: /* NOTE: must not be iso! */ dev_dbg (dummy_dev(dum), "ep %s halted, urb %p\n", ep->ep.name, urb); - maybe_set_status (urb, -EPIPE); + status = -EPIPE; goto return_urb; } /* FIXME make sure both ends agree on maxpacket */ @@ -1307,7 +1306,7 @@ restart: w_value = le16_to_cpu(setup.wValue); if (le16_to_cpu(setup.wLength) != urb->transfer_buffer_length) { - maybe_set_status (urb, -EOVERFLOW); + status = -EOVERFLOW; goto return_urb; } @@ -1337,7 +1336,7 @@ restart: if (setup.bRequestType != Dev_Request) break; dum->address = w_value; - maybe_set_status (urb, 0); + status = 0; dev_dbg (udc_dev(dum), "set_address = %d\n", w_value); value = 0; @@ -1364,7 +1363,7 @@ restart: if (value == 0) { dum->devstatus |= (1 << w_value); - maybe_set_status (urb, 0); + status = 0; } } else if (setup.bRequestType == Ep_Request) { @@ -1376,7 +1375,7 @@ restart: } ep2->halted = 1; value = 0; - maybe_set_status (urb, 0); + status = 0; } break; case USB_REQ_CLEAR_FEATURE: @@ -1386,7 +1385,7 @@ restart: dum->devstatus &= ~(1 << USB_DEVICE_REMOTE_WAKEUP); value = 0; - maybe_set_status (urb, 0); + status = 0; break; default: value = -EOPNOTSUPP; @@ -1401,7 +1400,7 @@ restart: } ep2->halted = 0; value = 0; - maybe_set_status (urb, 0); + status = 0; } break; case USB_REQ_GET_STATUS: @@ -1438,7 +1437,7 @@ restart: urb->actual_length = min (2, urb->transfer_buffer_length); value = 0; - maybe_set_status (urb, 0); + status = 0; } break; } @@ -1465,7 +1464,7 @@ restart: dev_dbg (udc_dev(dum), "setup --> %d\n", value); - maybe_set_status (urb, -EPIPE); + status = -EPIPE; urb->actual_length = 0; } @@ -1482,7 +1481,7 @@ restart: * report random errors, to debug drivers. */ limit = max (limit, periodic_bytes (dum, ep)); - maybe_set_status (urb, -ENOSYS); + status = -ENOSYS; break; case PIPE_INTERRUPT: @@ -1496,23 +1495,23 @@ restart: default: treat_control_like_bulk: ep->last_io = jiffies; - total = transfer (dum, urb, ep, limit); + total = transfer(dum, urb, ep, limit, &status); break; } /* incomplete transfer? */ - if (urb->status == -EINPROGRESS) + if (status == -EINPROGRESS) continue; return_urb: - urb->hcpriv = NULL; list_del (&urbp->urbp_list); kfree (urbp); if (ep) ep->already_seen = ep->setup_stage = 0; + usb_hcd_unlink_urb_from_ep(dummy_to_hcd(dum), urb); spin_unlock (&dum->lock); - usb_hcd_giveback_urb (dummy_to_hcd(dum), urb); + usb_hcd_giveback_urb(dummy_to_hcd(dum), urb, status); spin_lock (&dum->lock); goto restart; diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c index 3aa46cfa66b..f9d07108bc3 100644 --- a/drivers/usb/gadget/epautoconf.c +++ b/drivers/usb/gadget/epautoconf.c @@ -28,7 +28,7 @@ #include <linux/string.h> #include <linux/usb/ch9.h> -#include <linux/usb_gadget.h> +#include <linux/usb/gadget.h> #include "gadget_chips.h" diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index f70055473a0..9e732bff9df 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -19,40 +19,18 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +/* #define VERBOSE_DEBUG */ -// #define DEBUG 1 -// #define VERBOSE - -#include <linux/module.h> #include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/ioport.h> -#include <linux/slab.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/timer.h> -#include <linux/list.h> -#include <linux/interrupt.h> #include <linux/utsname.h> #include <linux/device.h> -#include <linux/moduleparam.h> #include <linux/ctype.h> - -#include <asm/byteorder.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/system.h> -#include <asm/uaccess.h> -#include <asm/unaligned.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> #include <linux/usb/ch9.h> #include <linux/usb/cdc.h> -#include <linux/usb_gadget.h> - -#include <linux/random.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/ethtool.h> +#include <linux/usb/gadget.h> #include "gadget_chips.h" @@ -356,15 +334,15 @@ module_param (qmult, uint, S_IRUGO|S_IWUSR); #define qlen(gadget) \ (DEFAULT_QLEN*((gadget->speed == USB_SPEED_HIGH) ? qmult : 1)) -/* also defer IRQs on highspeed TX */ -#define TX_DELAY qmult - static inline int BITRATE(struct usb_gadget *g) { return (g->speed == USB_SPEED_HIGH) ? HS_BPS : FS_BPS; } #else /* full speed (low speed doesn't do bulk) */ + +#define qmult 1 + #define DEVSPEED USB_SPEED_FULL #define qlen(gadget) DEFAULT_QLEN @@ -390,7 +368,7 @@ static inline int BITRATE(struct usb_gadget *g) do { } while (0) #endif /* DEBUG */ -#ifdef VERBOSE +#ifdef VERBOSE_DEBUG #define VDEBUG DEBUG #else #define VDEBUG(dev,fmt,args...) \ @@ -830,8 +808,6 @@ static const struct usb_descriptor_header *fs_rndis_function [] = { }; #endif -#ifdef CONFIG_USB_GADGET_DUALSPEED - /* * usb 2.0 devices need to expose both high speed and full speed * descriptors, unless they only run at full speed. @@ -934,18 +910,15 @@ static const struct usb_descriptor_header *hs_rndis_function [] = { /* maxpacket and other transfer characteristics vary by speed. */ -#define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs)) - -#else - -/* if there's no high speed support, maxpacket doesn't change. */ -#define ep_desc(g,hs,fs) (((void)(g)), (fs)) - -static inline void __init hs_subset_descriptors(void) +static inline struct usb_endpoint_descriptor * +ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *hs, + struct usb_endpoint_descriptor *fs) { + if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH) + return hs; + return fs; } -#endif /* !CONFIG_USB_GADGET_DUALSPEED */ /*-------------------------------------------------------------------------*/ @@ -989,22 +962,19 @@ static struct usb_gadget_strings stringtab = { * complications: class descriptors, and an altsetting. */ static int -config_buf (enum usb_device_speed speed, - u8 *buf, u8 type, - unsigned index, int is_otg) +config_buf(struct usb_gadget *g, u8 *buf, u8 type, unsigned index, int is_otg) { int len; const struct usb_config_descriptor *config; const struct usb_descriptor_header **function; -#ifdef CONFIG_USB_GADGET_DUALSPEED - int hs = (speed == USB_SPEED_HIGH); + int hs = 0; - if (type == USB_DT_OTHER_SPEED_CONFIG) - hs = !hs; + if (gadget_is_dualspeed(g)) { + hs = (g->speed == USB_SPEED_HIGH); + if (type == USB_DT_OTHER_SPEED_CONFIG) + hs = !hs; + } #define which_fn(t) (hs ? hs_ ## t ## _function : fs_ ## t ## _function) -#else -#define which_fn(t) (fs_ ## t ## _function) -#endif if (index >= device_desc.bNumConfigurations) return -EINVAL; @@ -1217,7 +1187,7 @@ eth_set_config (struct eth_dev *dev, unsigned number, gfp_t gfp_flags) if (number) eth_reset_config (dev); usb_gadget_vbus_draw(dev->gadget, - dev->gadget->is_otg ? 8 : 100); + gadget_is_otg(dev->gadget) ? 8 : 100); } else { char *speed; unsigned power; @@ -1399,24 +1369,22 @@ eth_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) value = min (wLength, (u16) sizeof device_desc); memcpy (req->buf, &device_desc, value); break; -#ifdef CONFIG_USB_GADGET_DUALSPEED case USB_DT_DEVICE_QUALIFIER: - if (!gadget->is_dualspeed) + if (!gadget_is_dualspeed(gadget)) break; value = min (wLength, (u16) sizeof dev_qualifier); memcpy (req->buf, &dev_qualifier, value); break; case USB_DT_OTHER_SPEED_CONFIG: - if (!gadget->is_dualspeed) + if (!gadget_is_dualspeed(gadget)) break; // FALLTHROUGH -#endif /* CONFIG_USB_GADGET_DUALSPEED */ case USB_DT_CONFIG: - value = config_buf (gadget->speed, req->buf, + value = config_buf(gadget, req->buf, wValue >> 8, wValue & 0xff, - gadget->is_otg); + gadget_is_otg(gadget)); if (value >= 0) value = min (wLength, (u16) value); break; @@ -1585,12 +1553,12 @@ done_set_intf: && rndis_control_intf.bInterfaceNumber == wIndex) { u8 *buf; + u32 n; /* return the result */ - buf = rndis_get_next_response (dev->rndis_config, - &value); + buf = rndis_get_next_response(dev->rndis_config, &n); if (buf) { - memcpy (req->buf, buf, value); + memcpy(req->buf, buf, n); req->complete = rndis_response_complete; rndis_free_response(dev->rndis_config, buf); } @@ -1989,8 +1957,20 @@ static int eth_start_xmit (struct sk_buff *skb, struct net_device *net) } spin_lock_irqsave(&dev->req_lock, flags); + /* + * this freelist can be empty if an interrupt triggered disconnect() + * and reconfigured the gadget (shutting down this queue) after the + * network stack decided to xmit but before we got the spinlock. + */ + if (list_empty(&dev->tx_reqs)) { + spin_unlock_irqrestore(&dev->req_lock, flags); + return 1; + } + req = container_of (dev->tx_reqs.next, struct usb_request, list); list_del (&req->list); + + /* temporarily stop TX queue when the freelist empties */ if (list_empty (&dev->tx_reqs)) netif_stop_queue (net); spin_unlock_irqrestore(&dev->req_lock, flags); @@ -2026,12 +2006,11 @@ static int eth_start_xmit (struct sk_buff *skb, struct net_device *net) req->length = length; -#ifdef CONFIG_USB_GADGET_DUALSPEED /* throttle highspeed IRQ rate back slightly */ - req->no_interrupt = (dev->gadget->speed == USB_SPEED_HIGH) - ? ((atomic_read (&dev->tx_qlen) % TX_DELAY) != 0) - : 0; -#endif + if (gadget_is_dualspeed(dev->gadget)) + req->no_interrupt = (dev->gadget->speed == USB_SPEED_HIGH) + ? ((atomic_read(&dev->tx_qlen) % qmult) != 0) + : 0; retval = usb_ep_queue (dev->in_ep, req, GFP_ATOMIC); switch (retval) { @@ -2188,8 +2167,7 @@ static int eth_stop (struct net_device *net) } if (rndis_active(dev)) { - rndis_set_param_medium (dev->rndis_config, - NDIS_MEDIUM_802_3, 0); + rndis_set_param_medium(dev->rndis_config, NDIS_MEDIUM_802_3, 0); (void) rndis_signal_disconnect (dev->rndis_config); } @@ -2443,26 +2421,28 @@ autoconf_fail: if (rndis) device_desc.bNumConfigurations = 2; -#ifdef CONFIG_USB_GADGET_DUALSPEED - if (rndis) - dev_qualifier.bNumConfigurations = 2; - else if (!cdc) - dev_qualifier.bDeviceClass = USB_CLASS_VENDOR_SPEC; + if (gadget_is_dualspeed(gadget)) { + if (rndis) + dev_qualifier.bNumConfigurations = 2; + else if (!cdc) + dev_qualifier.bDeviceClass = USB_CLASS_VENDOR_SPEC; - /* assumes ep0 uses the same value for both speeds ... */ - dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0; + /* assumes ep0 uses the same value for both speeds ... */ + dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0; - /* and that all endpoints are dual-speed */ - hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress; - hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress; + /* and that all endpoints are dual-speed */ + hs_source_desc.bEndpointAddress = + fs_source_desc.bEndpointAddress; + hs_sink_desc.bEndpointAddress = + fs_sink_desc.bEndpointAddress; #if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS) - if (status_ep) - hs_status_desc.bEndpointAddress = - fs_status_desc.bEndpointAddress; + if (status_ep) + hs_status_desc.bEndpointAddress = + fs_status_desc.bEndpointAddress; #endif -#endif /* DUALSPEED */ + } - if (gadget->is_otg) { + if (gadget_is_otg(gadget)) { otg_descriptor.bmAttributes |= USB_OTG_HNP, eth_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP; eth_config.bMaxPower = 4; @@ -2598,12 +2578,11 @@ fail0: if (rndis_set_param_dev (dev->rndis_config, dev->net, &dev->stats, &dev->cdc_filter)) goto fail0; - if (rndis_set_param_vendor (dev->rndis_config, vendorID, - manufacturer)) + if (rndis_set_param_vendor(dev->rndis_config, vendorID, + manufacturer)) goto fail0; - if (rndis_set_param_medium (dev->rndis_config, - NDIS_MEDIUM_802_3, - 0)) + if (rndis_set_param_medium(dev->rndis_config, + NDIS_MEDIUM_802_3, 0)) goto fail0; INFO (dev, "RNDIS ready\n"); } diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index 965ad7bec7b..73726c570a6 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -1,7 +1,7 @@ /* * file_storage.c -- File-backed USB Storage Gadget, for USB development * - * Copyright (C) 2003-2005 Alan Stern + * Copyright (C) 2003-2007 Alan Stern * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -217,17 +217,11 @@ */ -#undef DEBUG -#undef VERBOSE -#undef DUMP_MSGS - +/* #define VERBOSE_DEBUG */ +/* #define DUMP_MSGS */ -#include <asm/system.h> -#include <asm/uaccess.h> -#include <linux/bitops.h> #include <linux/blkdev.h> -#include <linux/compiler.h> #include <linux/completion.h> #include <linux/dcache.h> #include <linux/delay.h> @@ -235,18 +229,10 @@ #include <linux/fcntl.h> #include <linux/file.h> #include <linux/fs.h> -#include <linux/init.h> -#include <linux/kernel.h> #include <linux/kref.h> #include <linux/kthread.h> #include <linux/limits.h> -#include <linux/list.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/pagemap.h> #include <linux/rwsem.h> -#include <linux/sched.h> -#include <linux/signal.h> #include <linux/slab.h> #include <linux/spinlock.h> #include <linux/string.h> @@ -254,7 +240,7 @@ #include <linux/utsname.h> #include <linux/usb/ch9.h> -#include <linux/usb_gadget.h> +#include <linux/usb/gadget.h> #include "gadget_chips.h" @@ -263,7 +249,7 @@ #define DRIVER_DESC "File-backed Storage Gadget" #define DRIVER_NAME "g_file_storage" -#define DRIVER_VERSION "28 November 2005" +#define DRIVER_VERSION "7 August 2007" static const char longname[] = DRIVER_DESC; static const char shortname[] = DRIVER_NAME; @@ -289,57 +275,48 @@ MODULE_LICENSE("Dual BSD/GPL"); /*-------------------------------------------------------------------------*/ -#define xprintk(f,level,fmt,args...) \ - dev_printk(level , &(f)->gadget->dev , fmt , ## args) -#define yprintk(l,level,fmt,args...) \ - dev_printk(level , &(l)->dev , fmt , ## args) - #ifdef DEBUG -#define DBG(fsg,fmt,args...) \ - xprintk(fsg , KERN_DEBUG , fmt , ## args) #define LDBG(lun,fmt,args...) \ - yprintk(lun , KERN_DEBUG , fmt , ## args) + dev_dbg(&(lun)->dev , fmt , ## args) #define MDBG(fmt,args...) \ printk(KERN_DEBUG DRIVER_NAME ": " fmt , ## args) #else -#define DBG(fsg,fmt,args...) \ - do { } while (0) #define LDBG(lun,fmt,args...) \ do { } while (0) #define MDBG(fmt,args...) \ do { } while (0) -#undef VERBOSE +#undef VERBOSE_DEBUG #undef DUMP_MSGS #endif /* DEBUG */ -#ifdef VERBOSE -#define VDBG DBG +#ifdef VERBOSE_DEBUG #define VLDBG LDBG #else -#define VDBG(fsg,fmt,args...) \ - do { } while (0) #define VLDBG(lun,fmt,args...) \ do { } while (0) -#endif /* VERBOSE */ +#endif /* VERBOSE_DEBUG */ -#define ERROR(fsg,fmt,args...) \ - xprintk(fsg , KERN_ERR , fmt , ## args) #define LERROR(lun,fmt,args...) \ - yprintk(lun , KERN_ERR , fmt , ## args) - -#define WARN(fsg,fmt,args...) \ - xprintk(fsg , KERN_WARNING , fmt , ## args) + dev_err(&(lun)->dev , fmt , ## args) #define LWARN(lun,fmt,args...) \ - yprintk(lun , KERN_WARNING , fmt , ## args) - -#define INFO(fsg,fmt,args...) \ - xprintk(fsg , KERN_INFO , fmt , ## args) + dev_warn(&(lun)->dev , fmt , ## args) #define LINFO(lun,fmt,args...) \ - yprintk(lun , KERN_INFO , fmt , ## args) + dev_info(&(lun)->dev , fmt , ## args) #define MINFO(fmt,args...) \ printk(KERN_INFO DRIVER_NAME ": " fmt , ## args) +#define DBG(d, fmt, args...) \ + dev_dbg(&(d)->gadget->dev , fmt , ## args) +#define VDBG(d, fmt, args...) \ + dev_vdbg(&(d)->gadget->dev , fmt , ## args) +#define ERROR(d, fmt, args...) \ + dev_err(&(d)->gadget->dev , fmt , ## args) +#define WARN(d, fmt, args...) \ + dev_warn(&(d)->gadget->dev , fmt , ## args) +#define INFO(d, fmt, args...) \ + dev_info(&(d)->gadget->dev , fmt , ## args) + /*-------------------------------------------------------------------------*/ @@ -350,8 +327,8 @@ MODULE_LICENSE("Dual BSD/GPL"); static struct { char *file[MAX_LUNS]; int ro[MAX_LUNS]; - int num_filenames; - int num_ros; + unsigned int num_filenames; + unsigned int num_ros; unsigned int nluns; int removable; @@ -578,7 +555,7 @@ struct lun { #define backing_file_is_open(curlun) ((curlun)->filp != NULL) -static inline struct lun *dev_to_lun(struct device *dev) +static struct lun *dev_to_lun(struct device *dev) { return container_of(dev, struct lun, dev); } @@ -711,13 +688,13 @@ struct fsg_dev { typedef void (*fsg_routine_t)(struct fsg_dev *); -static int inline exception_in_progress(struct fsg_dev *fsg) +static int exception_in_progress(struct fsg_dev *fsg) { return (fsg->state > FSG_STATE_IDLE); } /* Make bulk-out requests be divisible by the maxpacket size */ -static void inline set_bulk_out_req_length(struct fsg_dev *fsg, +static void set_bulk_out_req_length(struct fsg_dev *fsg, struct fsg_buffhd *bh, unsigned int length) { unsigned int rem; @@ -743,50 +720,36 @@ static void close_all_backing_files(struct fsg_dev *fsg); static void dump_msg(struct fsg_dev *fsg, const char *label, const u8 *buf, unsigned int length) { - unsigned int start, num, i; - char line[52], *p; - - if (length >= 512) - return; - DBG(fsg, "%s, length %u:\n", label, length); - - start = 0; - while (length > 0) { - num = min(length, 16u); - p = line; - for (i = 0; i < num; ++i) { - if (i == 8) - *p++ = ' '; - sprintf(p, " %02x", buf[i]); - p += 3; - } - *p = 0; - printk(KERN_DEBUG "%6x: %s\n", start, line); - buf += num; - start += num; - length -= num; + if (length < 512) { + DBG(fsg, "%s, length %u:\n", label, length); + print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, + 16, 1, buf, length, 0); } } -static void inline dump_cdb(struct fsg_dev *fsg) +static void dump_cdb(struct fsg_dev *fsg) {} #else -static void inline dump_msg(struct fsg_dev *fsg, const char *label, +static void dump_msg(struct fsg_dev *fsg, const char *label, const u8 *buf, unsigned int length) {} -static void inline dump_cdb(struct fsg_dev *fsg) -{ - int i; - char cmdbuf[3*MAX_COMMAND_SIZE + 1]; +#ifdef VERBOSE_DEBUG - for (i = 0; i < fsg->cmnd_size; ++i) - sprintf(cmdbuf + i*3, " %02x", fsg->cmnd[i]); - VDBG(fsg, "SCSI CDB: %s\n", cmdbuf); +static void dump_cdb(struct fsg_dev *fsg) +{ + print_hex_dump(KERN_DEBUG, "SCSI CDB: ", DUMP_PREFIX_NONE, + 16, 1, fsg->cmnd, fsg->cmnd_size, 0); } +#else + +static void dump_cdb(struct fsg_dev *fsg) +{} + +#endif /* VERBOSE_DEBUG */ #endif /* DUMP_MSGS */ @@ -809,24 +772,24 @@ static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep) /* Routines for unaligned data access */ -static u16 inline get_be16(u8 *buf) +static u16 get_be16(u8 *buf) { return ((u16) buf[0] << 8) | ((u16) buf[1]); } -static u32 inline get_be32(u8 *buf) +static u32 get_be32(u8 *buf) { return ((u32) buf[0] << 24) | ((u32) buf[1] << 16) | ((u32) buf[2] << 8) | ((u32) buf[3]); } -static void inline put_be16(u8 *buf, u16 val) +static void put_be16(u8 *buf, u16 val) { buf[0] = val >> 8; buf[1] = val; } -static void inline put_be32(u8 *buf, u32 val) +static void put_be32(u8 *buf, u32 val) { buf[0] = val >> 24; buf[1] = val >> 16; @@ -950,8 +913,6 @@ static const struct usb_descriptor_header *fs_function[] = { #define FS_FUNCTION_PRE_EP_ENTRIES 2 -#ifdef CONFIG_USB_GADGET_DUALSPEED - /* * USB 2.0 devices need to expose both high speed and full speed * descriptors, unless they only run at full speed. @@ -1014,14 +975,14 @@ static const struct usb_descriptor_header *hs_function[] = { #define HS_FUNCTION_PRE_EP_ENTRIES 2 /* Maxpacket and other transfer characteristics vary by speed. */ -#define ep_desc(g,fs,hs) (((g)->speed==USB_SPEED_HIGH) ? (hs) : (fs)) - -#else - -/* If there's no high speed support, always use the full-speed descriptor. */ -#define ep_desc(g,fs,hs) fs - -#endif /* !CONFIG_USB_GADGET_DUALSPEED */ +static struct usb_endpoint_descriptor * +ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *fs, + struct usb_endpoint_descriptor *hs) +{ + if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH) + return hs; + return fs; +} /* The CBI specification limits the serial string to 12 uppercase hexadecimal @@ -1053,26 +1014,22 @@ static struct usb_gadget_strings stringtab = { static int populate_config_buf(struct usb_gadget *gadget, u8 *buf, u8 type, unsigned index) { -#ifdef CONFIG_USB_GADGET_DUALSPEED enum usb_device_speed speed = gadget->speed; -#endif int len; const struct usb_descriptor_header **function; if (index > 0) return -EINVAL; -#ifdef CONFIG_USB_GADGET_DUALSPEED - if (type == USB_DT_OTHER_SPEED_CONFIG) + if (gadget_is_dualspeed(gadget) && type == USB_DT_OTHER_SPEED_CONFIG) speed = (USB_SPEED_FULL + USB_SPEED_HIGH) - speed; - if (speed == USB_SPEED_HIGH) + if (gadget_is_dualspeed(gadget) && speed == USB_SPEED_HIGH) function = hs_function; else -#endif function = fs_function; /* for now, don't advertise srp-only devices */ - if (!gadget->is_otg) + if (!gadget_is_otg(gadget)) function++; len = usb_gadget_config_buf(&config_desc, buf, EP0_BUFSIZE, function); @@ -1394,10 +1351,9 @@ static int standard_setup_req(struct fsg_dev *fsg, value = sizeof device_desc; memcpy(req->buf, &device_desc, value); break; -#ifdef CONFIG_USB_GADGET_DUALSPEED case USB_DT_DEVICE_QUALIFIER: VDBG(fsg, "get device qualifier\n"); - if (!fsg->gadget->is_dualspeed) + if (!gadget_is_dualspeed(fsg->gadget)) break; value = sizeof dev_qualifier; memcpy(req->buf, &dev_qualifier, value); @@ -1405,15 +1361,12 @@ static int standard_setup_req(struct fsg_dev *fsg, case USB_DT_OTHER_SPEED_CONFIG: VDBG(fsg, "get other-speed config descriptor\n"); - if (!fsg->gadget->is_dualspeed) + if (!gadget_is_dualspeed(fsg->gadget)) break; goto get_config; -#endif case USB_DT_CONFIG: VDBG(fsg, "get configuration descriptor\n"); -#ifdef CONFIG_USB_GADGET_DUALSPEED - get_config: -#endif +get_config: value = populate_config_buf(fsg->gadget, req->buf, w_value >> 8, @@ -1646,7 +1599,8 @@ static int do_read(struct fsg_dev *fsg) /* Wait for the next buffer to become available */ bh = fsg->next_buffhd_to_fill; while (bh->state != BUF_STATE_EMPTY) { - if ((rc = sleep_thread(fsg)) != 0) + rc = sleep_thread(fsg); + if (rc) return rc; } @@ -1885,7 +1839,8 @@ static int do_write(struct fsg_dev *fsg) } /* Wait for something to happen */ - if ((rc = sleep_thread(fsg)) != 0) + rc = sleep_thread(fsg); + if (rc) return rc; } @@ -2369,7 +2324,8 @@ static int pad_with_zeros(struct fsg_dev *fsg) /* Wait for the next buffer to be free */ while (bh->state != BUF_STATE_EMPTY) { - if ((rc = sleep_thread(fsg)) != 0) + rc = sleep_thread(fsg); + if (rc) return rc; } @@ -2429,7 +2385,8 @@ static int throw_away_data(struct fsg_dev *fsg) } /* Otherwise wait for something to happen */ - if ((rc = sleep_thread(fsg)) != 0) + rc = sleep_thread(fsg); + if (rc) return rc; } return 0; @@ -2551,7 +2508,8 @@ static int send_status(struct fsg_dev *fsg) /* Wait for the next buffer to become available */ bh = fsg->next_buffhd_to_fill; while (bh->state != BUF_STATE_EMPTY) { - if ((rc = sleep_thread(fsg)) != 0) + rc = sleep_thread(fsg); + if (rc) return rc; } @@ -2771,9 +2729,10 @@ static int do_scsi_command(struct fsg_dev *fsg) /* Wait for the next buffer to become available for data or status */ bh = fsg->next_buffhd_to_drain = fsg->next_buffhd_to_fill; while (bh->state != BUF_STATE_EMPTY) { - if ((rc = sleep_thread(fsg)) != 0) + rc = sleep_thread(fsg); + if (rc) return rc; - } + } fsg->phase_error = 0; fsg->short_packet_received = 0; @@ -3005,7 +2964,7 @@ static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh) /* Is the CBW meaningful? */ if (cbw->Lun >= MAX_LUNS || cbw->Flags & ~USB_BULK_IN_FLAG || - cbw->Length < 6 || cbw->Length > MAX_COMMAND_SIZE) { + cbw->Length <= 0 || cbw->Length > MAX_COMMAND_SIZE) { DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, " "cmdlen %u\n", cbw->Lun, cbw->Flags, cbw->Length); @@ -3045,9 +3004,10 @@ static int get_next_command(struct fsg_dev *fsg) /* Wait for the next buffer to become available */ bh = fsg->next_buffhd_to_fill; while (bh->state != BUF_STATE_EMPTY) { - if ((rc = sleep_thread(fsg)) != 0) + rc = sleep_thread(fsg); + if (rc) return rc; - } + } /* Queue a request to read a Bulk-only CBW */ set_bulk_out_req_length(fsg, bh, USB_BULK_CB_WRAP_LEN); @@ -3061,9 +3021,10 @@ static int get_next_command(struct fsg_dev *fsg) /* Wait for the CBW to arrive */ while (bh->state != BUF_STATE_FULL) { - if ((rc = sleep_thread(fsg)) != 0) + rc = sleep_thread(fsg); + if (rc) return rc; - } + } smp_rmb(); rc = received_cbw(fsg, bh); bh->state = BUF_STATE_EMPTY; @@ -3072,9 +3033,10 @@ static int get_next_command(struct fsg_dev *fsg) /* Wait for the next command to arrive */ while (fsg->cbbuf_cmnd_size == 0) { - if ((rc = sleep_thread(fsg)) != 0) + rc = sleep_thread(fsg); + if (rc) return rc; - } + } /* Is the previous status interrupt request still busy? * The host is allowed to skip reading the status, @@ -3595,7 +3557,8 @@ static ssize_t show_ro(struct device *dev, struct device_attribute *attr, char * return sprintf(buf, "%d\n", curlun->ro); } -static ssize_t show_file(struct device *dev, struct device_attribute *attr, char *buf) +static ssize_t show_file(struct device *dev, struct device_attribute *attr, + char *buf) { struct lun *curlun = dev_to_lun(dev); struct fsg_dev *fsg = dev_get_drvdata(dev); @@ -3604,8 +3567,8 @@ static ssize_t show_file(struct device *dev, struct device_attribute *attr, char down_read(&fsg->filesem); if (backing_file_is_open(curlun)) { // Get the complete pathname - p = d_path(curlun->filp->f_path.dentry, curlun->filp->f_path.mnt, - buf, PAGE_SIZE - 1); + p = d_path(curlun->filp->f_path.dentry, + curlun->filp->f_path.mnt, buf, PAGE_SIZE - 1); if (IS_ERR(p)) rc = PTR_ERR(p); else { @@ -3623,7 +3586,8 @@ static ssize_t show_file(struct device *dev, struct device_attribute *attr, char } -static ssize_t store_ro(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +static ssize_t store_ro(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { ssize_t rc = count; struct lun *curlun = dev_to_lun(dev); @@ -3647,7 +3611,8 @@ static ssize_t store_ro(struct device *dev, struct device_attribute *attr, const return rc; } -static ssize_t store_file(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) +static ssize_t store_file(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { struct lun *curlun = dev_to_lun(dev); struct fsg_dev *fsg = dev_get_drvdata(dev); @@ -3859,7 +3824,7 @@ static int __init fsg_bind(struct usb_gadget *gadget) /* Find out how many LUNs there should be */ i = mod_data.nluns; if (i == 0) - i = max(mod_data.num_filenames, 1); + i = max(mod_data.num_filenames, 1u); if (i > MAX_LUNS) { ERROR(fsg, "invalid number of LUNs: %d\n", i); rc = -EINVAL; @@ -3944,21 +3909,23 @@ static int __init fsg_bind(struct usb_gadget *gadget) intf_desc.bInterfaceProtocol = mod_data.transport_type; fs_function[i + FS_FUNCTION_PRE_EP_ENTRIES] = NULL; -#ifdef CONFIG_USB_GADGET_DUALSPEED - hs_function[i + HS_FUNCTION_PRE_EP_ENTRIES] = NULL; + if (gadget_is_dualspeed(gadget)) { + hs_function[i + HS_FUNCTION_PRE_EP_ENTRIES] = NULL; - /* Assume ep0 uses the same maxpacket value for both speeds */ - dev_qualifier.bMaxPacketSize0 = fsg->ep0->maxpacket; + /* Assume ep0 uses the same maxpacket value for both speeds */ + dev_qualifier.bMaxPacketSize0 = fsg->ep0->maxpacket; - /* Assume that all endpoint addresses are the same for both speeds */ - hs_bulk_in_desc.bEndpointAddress = fs_bulk_in_desc.bEndpointAddress; - hs_bulk_out_desc.bEndpointAddress = fs_bulk_out_desc.bEndpointAddress; - hs_intr_in_desc.bEndpointAddress = fs_intr_in_desc.bEndpointAddress; -#endif + /* Assume endpoint addresses are the same for both speeds */ + hs_bulk_in_desc.bEndpointAddress = + fs_bulk_in_desc.bEndpointAddress; + hs_bulk_out_desc.bEndpointAddress = + fs_bulk_out_desc.bEndpointAddress; + hs_intr_in_desc.bEndpointAddress = + fs_intr_in_desc.bEndpointAddress; + } - if (gadget->is_otg) { + if (gadget_is_otg(gadget)) otg_desc.bmAttributes |= USB_OTG_HNP; - } rc = -ENOMEM; diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c index d57bcfbc08a..9bb7f64a85c 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.c +++ b/drivers/usb/gadget/fsl_usb2_udc.c @@ -35,7 +35,7 @@ #include <linux/moduleparam.h> #include <linux/device.h> #include <linux/usb/ch9.h> -#include <linux/usb_gadget.h> +#include <linux/usb/gadget.h> #include <linux/usb/otg.h> #include <linux/dma-mapping.h> #include <linux/platform_device.h> @@ -1090,14 +1090,11 @@ static int fsl_vbus_session(struct usb_gadget *gadget, int is_active) */ static int fsl_vbus_draw(struct usb_gadget *gadget, unsigned mA) { -#ifdef CONFIG_USB_OTG struct fsl_udc *udc; udc = container_of(gadget, struct fsl_udc, gadget); - if (udc->transceiver) return otg_set_power(udc->transceiver, mA); -#endif return -ENOTSUPP; } @@ -1120,7 +1117,7 @@ static int fsl_pullup(struct usb_gadget *gadget, int is_on) return 0; } -/* defined in usb_gadget.h */ +/* defined in gadget.h */ static struct usb_gadget_ops fsl_gadget_ops = { .get_frame = fsl_get_frame, .wakeup = fsl_wakeup, @@ -1321,7 +1318,7 @@ static void setup_received_irq(struct fsl_udc *udc, | USB_TYPE_STANDARD)) { /* Note: The driver has not include OTG support yet. * This will be set when OTG support is added */ - if (!udc->gadget.is_otg) + if (!gadget_is_otg(udc->gadget)) break; else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE) udc->gadget.b_hnp_enable = 1; @@ -1330,6 +1327,8 @@ static void setup_received_irq(struct fsl_udc *udc, else if (setup->bRequest == USB_DEVICE_A_ALT_HNP_SUPPORT) udc->gadget.a_alt_hnp_support = 1; + else + break; rc = 0; } else break; @@ -1840,10 +1839,8 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) if (!driver || driver != udc_controller->driver || !driver->unbind) return -EINVAL; -#ifdef CONFIG_USB_OTG if (udc_controller->transceiver) (void)otg_set_peripheral(udc_controller->transceiver, 0); -#endif /* stop DR, disable intr */ dr_controller_stop(udc_controller); diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c index 1c5aa49d743..0689189550b 100644 --- a/drivers/usb/gadget/gmidi.c +++ b/drivers/usb/gadget/gmidi.c @@ -18,17 +18,11 @@ * http://www.usb.org/developers/devclass_docs/midi10.pdf */ -#define DEBUG 1 -// #define VERBOSE +/* #define VERBOSE_DEBUG */ -#include <linux/module.h> #include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/init.h> #include <linux/utsname.h> #include <linux/device.h> -#include <linux/moduleparam.h> #include <sound/driver.h> #include <sound/core.h> @@ -36,7 +30,7 @@ #include <sound/rawmidi.h> #include <linux/usb/ch9.h> -#include <linux/usb_gadget.h> +#include <linux/usb/gadget.h> #include <linux/usb/audio.h> #include <linux/usb/midi.h> @@ -139,30 +133,16 @@ struct gmidi_device { static void gmidi_transmit(struct gmidi_device* dev, struct usb_request* req); -#define xprintk(d,level,fmt,args...) \ - dev_printk(level , &(d)->gadget->dev , fmt , ## args) - -#ifdef DEBUG -#define DBG(dev,fmt,args...) \ - xprintk(dev , KERN_DEBUG , fmt , ## args) -#else -#define DBG(dev,fmt,args...) \ - do { } while (0) -#endif /* DEBUG */ - -#ifdef VERBOSE -#define VDBG DBG -#else -#define VDBG(dev,fmt,args...) \ - do { } while (0) -#endif /* VERBOSE */ - -#define ERROR(dev,fmt,args...) \ - xprintk(dev , KERN_ERR , fmt , ## args) -#define WARN(dev,fmt,args...) \ - xprintk(dev , KERN_WARNING , fmt , ## args) -#define INFO(dev,fmt,args...) \ - xprintk(dev , KERN_INFO , fmt , ## args) +#define DBG(d, fmt, args...) \ + dev_dbg(&(d)->gadget->dev , fmt , ## args) +#define VDBG(d, fmt, args...) \ + dev_vdbg(&(d)->gadget->dev , fmt , ## args) +#define ERROR(d, fmt, args...) \ + dev_err(&(d)->gadget->dev , fmt , ## args) +#define WARN(d, fmt, args...) \ + dev_warn(&(d)->gadget->dev , fmt , ## args) +#define INFO(d, fmt, args...) \ + dev_info(&(d)->gadget->dev , fmt , ## args) static unsigned buflen = 256; @@ -425,7 +405,7 @@ static int config_buf(struct usb_gadget *gadget, return len; } -static struct usb_request* alloc_ep_req(struct usb_ep *ep, unsigned length) +static struct usb_request *alloc_ep_req(struct usb_ep *ep, unsigned length) { struct usb_request *req; @@ -455,7 +435,7 @@ static const uint8_t gmidi_cin_length[] = { * Receives a chunk of MIDI data. */ static void gmidi_read_data(struct usb_ep *ep, int cable, - uint8_t* data, int length) + uint8_t *data, int length) { struct gmidi_device *dev = ep->driver_data; /* cable is ignored, because for now we only have one. */ @@ -541,7 +521,7 @@ static int set_gmidi_config(struct gmidi_device *dev, gfp_t gfp_flags) { int err = 0; struct usb_request *req; - struct usb_ep* ep; + struct usb_ep *ep; unsigned i; err = usb_ep_enable(dev->in_ep, &bulk_in_desc); @@ -628,7 +608,7 @@ gmidi_set_config(struct gmidi_device *dev, unsigned number, gfp_t gfp_flags) if (gadget_is_sa1100(gadget) && dev->config) { /* tx fifo is full, but we can't clear it...*/ - INFO(dev, "can't change configurations\n"); + ERROR(dev, "can't change configurations\n"); return -ESPIPE; } gmidi_reset_config(dev); @@ -843,7 +823,7 @@ static void gmidi_disconnect(struct usb_gadget *gadget) static void /* __init_or_exit */ gmidi_unbind(struct usb_gadget *gadget) { struct gmidi_device *dev = get_gadget_data(gadget); - struct snd_card* card; + struct snd_card *card; DBG(dev, "unbind\n"); @@ -867,12 +847,12 @@ static int gmidi_snd_free(struct snd_device *device) return 0; } -static void gmidi_transmit_packet(struct usb_request* req, uint8_t p0, +static void gmidi_transmit_packet(struct usb_request *req, uint8_t p0, uint8_t p1, uint8_t p2, uint8_t p3) { unsigned length = req->length; + u8 *buf = (u8 *)req->buf + length; - uint8_t* buf = (uint8_t*)req->buf + length; buf[0] = p0; buf[1] = p1; buf[2] = p2; @@ -883,8 +863,8 @@ static void gmidi_transmit_packet(struct usb_request* req, uint8_t p0, /* * Converts MIDI commands to USB MIDI packets. */ -static void gmidi_transmit_byte(struct usb_request* req, - struct gmidi_in_port* port, uint8_t b) +static void gmidi_transmit_byte(struct usb_request *req, + struct gmidi_in_port *port, uint8_t b) { uint8_t p0 = port->cable; @@ -981,10 +961,10 @@ static void gmidi_transmit_byte(struct usb_request* req, } } -static void gmidi_transmit(struct gmidi_device* dev, struct usb_request* req) +static void gmidi_transmit(struct gmidi_device *dev, struct usb_request *req) { - struct usb_ep* ep = dev->in_ep; - struct gmidi_in_port* port = &dev->in_port; + struct usb_ep *ep = dev->in_ep; + struct gmidi_in_port *port = &dev->in_port; if (!ep) { return; @@ -1020,14 +1000,14 @@ static void gmidi_transmit(struct gmidi_device* dev, struct usb_request* req) static void gmidi_in_tasklet(unsigned long data) { - struct gmidi_device* dev = (struct gmidi_device*)data; + struct gmidi_device *dev = (struct gmidi_device *)data; gmidi_transmit(dev, NULL); } static int gmidi_in_open(struct snd_rawmidi_substream *substream) { - struct gmidi_device* dev = substream->rmidi->private_data; + struct gmidi_device *dev = substream->rmidi->private_data; VDBG(dev, "gmidi_in_open\n"); dev->in_substream = substream; @@ -1037,13 +1017,15 @@ static int gmidi_in_open(struct snd_rawmidi_substream *substream) static int gmidi_in_close(struct snd_rawmidi_substream *substream) { + struct gmidi_device *dev = substream->rmidi->private_data; + VDBG(dev, "gmidi_in_close\n"); return 0; } static void gmidi_in_trigger(struct snd_rawmidi_substream *substream, int up) { - struct gmidi_device* dev = substream->rmidi->private_data; + struct gmidi_device *dev = substream->rmidi->private_data; VDBG(dev, "gmidi_in_trigger %d\n", up); dev->in_port.active = up; @@ -1054,7 +1036,7 @@ static void gmidi_in_trigger(struct snd_rawmidi_substream *substream, int up) static int gmidi_out_open(struct snd_rawmidi_substream *substream) { - struct gmidi_device* dev = substream->rmidi->private_data; + struct gmidi_device *dev = substream->rmidi->private_data; VDBG(dev, "gmidi_out_open\n"); dev->out_substream = substream; @@ -1063,13 +1045,15 @@ static int gmidi_out_open(struct snd_rawmidi_substream *substream) static int gmidi_out_close(struct snd_rawmidi_substream *substream) { + struct gmidi_device *dev = substream->rmidi->private_data; + VDBG(dev, "gmidi_out_close\n"); return 0; } static void gmidi_out_trigger(struct snd_rawmidi_substream *substream, int up) { - struct gmidi_device* dev = substream->rmidi->private_data; + struct gmidi_device *dev = substream->rmidi->private_data; VDBG(dev, "gmidi_out_trigger %d\n", up); if (up) { diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c index 349b8166f34..2ec9d196a8c 100644 --- a/drivers/usb/gadget/goku_udc.c +++ b/drivers/usb/gadget/goku_udc.c @@ -37,7 +37,7 @@ #include <linux/proc_fs.h> #include <linux/device.h> #include <linux/usb/ch9.h> -#include <linux/usb_gadget.h> +#include <linux/usb/gadget.h> #include <asm/byteorder.h> #include <asm/io.h> diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index 173004f60fe..47ef8bd58a0 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -20,8 +20,7 @@ */ -// #define DEBUG /* data to help fault diagnosis */ -// #define VERBOSE /* extra debug messages (success too) */ +/* #define VERBOSE_DEBUG */ #include <linux/init.h> #include <linux/module.h> @@ -38,7 +37,7 @@ #include <linux/moduleparam.h> #include <linux/usb/gadgetfs.h> -#include <linux/usb_gadget.h> +#include <linux/usb/gadget.h> /* @@ -253,7 +252,7 @@ static const char *CHIP; do { } while (0) #endif /* DEBUG */ -#ifdef VERBOSE +#ifdef VERBOSE_DEBUG #define VDEBUG DBG #else #define VDEBUG(dev,fmt,args...) \ @@ -1010,11 +1009,12 @@ ep0_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr) /* assume that was SET_CONFIGURATION */ if (dev->current_config) { unsigned power; -#ifdef CONFIG_USB_GADGET_DUALSPEED - if (dev->gadget->speed == USB_SPEED_HIGH) + + if (gadget_is_dualspeed(dev->gadget) + && (dev->gadget->speed + == USB_SPEED_HIGH)) power = dev->hs_config->bMaxPower; else -#endif power = dev->config->bMaxPower; usb_gadget_vbus_draw(dev->gadget, 2 * power); } @@ -1355,24 +1355,21 @@ static int config_buf (struct dev_data *dev, u8 type, unsigned index) { int len; -#ifdef CONFIG_USB_GADGET_DUALSPEED - int hs; -#endif + int hs = 0; /* only one configuration */ if (index > 0) return -EINVAL; -#ifdef CONFIG_USB_GADGET_DUALSPEED - hs = (dev->gadget->speed == USB_SPEED_HIGH); - if (type == USB_DT_OTHER_SPEED_CONFIG) - hs = !hs; + if (gadget_is_dualspeed(dev->gadget)) { + hs = (dev->gadget->speed == USB_SPEED_HIGH); + if (type == USB_DT_OTHER_SPEED_CONFIG) + hs = !hs; + } if (hs) { dev->req->buf = dev->hs_config; len = le16_to_cpu(dev->hs_config->wTotalLength); - } else -#endif - { + } else { dev->req->buf = dev->config; len = le16_to_cpu(dev->config->wTotalLength); } @@ -1393,13 +1390,13 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) spin_lock (&dev->lock); dev->setup_abort = 0; if (dev->state == STATE_DEV_UNCONNECTED) { -#ifdef CONFIG_USB_GADGET_DUALSPEED - if (gadget->speed == USB_SPEED_HIGH && dev->hs_config == NULL) { + if (gadget_is_dualspeed(gadget) + && gadget->speed == USB_SPEED_HIGH + && dev->hs_config == NULL) { spin_unlock(&dev->lock); ERROR (dev, "no high speed config??\n"); return -EINVAL; } -#endif /* CONFIG_USB_GADGET_DUALSPEED */ dev->state = STATE_DEV_CONNECTED; dev->dev->bMaxPacketSize0 = gadget->ep0->maxpacket; @@ -1469,13 +1466,12 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) // user mode expected to disable endpoints } else { u8 config, power; -#ifdef CONFIG_USB_GADGET_DUALSPEED - if (gadget->speed == USB_SPEED_HIGH) { + + if (gadget_is_dualspeed(gadget) + && gadget->speed == USB_SPEED_HIGH) { config = dev->hs_config->bConfigurationValue; power = dev->hs_config->bMaxPower; - } else -#endif - { + } else { config = dev->config->bConfigurationValue; power = dev->config->bMaxPower; } diff --git a/drivers/usb/gadget/lh7a40x_udc.h b/drivers/usb/gadget/lh7a40x_udc.h index b3fe197e1ee..1ecfd6366b9 100644 --- a/drivers/usb/gadget/lh7a40x_udc.h +++ b/drivers/usb/gadget/lh7a40x_udc.h @@ -50,7 +50,7 @@ #include <asm/hardware.h> #include <linux/usb/ch9.h> -#include <linux/usb_gadget.h> +#include <linux/usb/gadget.h> /* * Memory map diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c index 4b27d12f049..ebc5536aa27 100644 --- a/drivers/usb/gadget/m66592-udc.c +++ b/drivers/usb/gadget/m66592-udc.c @@ -27,7 +27,7 @@ #include <linux/platform_device.h> #include <linux/usb/ch9.h> -#include <linux/usb_gadget.h> +#include <linux/usb/gadget.h> #include "m66592-udc.h" diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index c3d364ecd4f..d5d473f8144 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -62,7 +62,7 @@ #include <linux/moduleparam.h> #include <linux/device.h> #include <linux/usb/ch9.h> -#include <linux/usb_gadget.h> +#include <linux/usb/gadget.h> #include <asm/byteorder.h> #include <asm/io.h> diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index 9b0f0925ddd..87c4f50dfb6 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -38,7 +38,7 @@ #include <linux/moduleparam.h> #include <linux/platform_device.h> #include <linux/usb/ch9.h> -#include <linux/usb_gadget.h> +#include <linux/usb/gadget.h> #include <linux/usb/otg.h> #include <linux/dma-mapping.h> #include <linux/clk.h> @@ -1241,19 +1241,15 @@ static void pullup_enable(struct omap_udc *udc) udc->gadget.dev.parent->power.power_state = PMSG_ON; udc->gadget.dev.power.power_state = PMSG_ON; UDC_SYSCON1_REG |= UDC_PULLUP_EN; -#ifndef CONFIG_USB_OTG - if (!cpu_is_omap15xx()) + if (!gadget_is_otg(udc->gadget) && !cpu_is_omap15xx()) OTG_CTRL_REG |= OTG_BSESSVLD; -#endif UDC_IRQ_EN_REG = UDC_DS_CHG_IE; } static void pullup_disable(struct omap_udc *udc) { -#ifndef CONFIG_USB_OTG - if (!cpu_is_omap15xx()) + if (!gadget_is_otg(udc->gadget) && !cpu_is_omap15xx()) OTG_CTRL_REG &= ~OTG_BSESSVLD; -#endif UDC_IRQ_EN_REG = UDC_DS_CHG_IE; UDC_SYSCON1_REG &= ~UDC_PULLUP_EN; } @@ -1390,7 +1386,7 @@ static void update_otg(struct omap_udc *udc) { u16 devstat; - if (!udc->gadget.is_otg) + if (!gadget_is_otg(udc->gadget)) return; if (OTG_CTRL_REG & OTG_ID) diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index 1407ad1c812..3173b39f0bf 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -43,6 +43,8 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/irq.h> +#include <linux/clk.h> +#include <linux/err.h> #include <asm/byteorder.h> #include <asm/dma.h> @@ -54,7 +56,7 @@ #include <asm/hardware.h> #include <linux/usb/ch9.h> -#include <linux/usb_gadget.h> +#include <linux/usb/gadget.h> #include <asm/mach/udc_pxa2xx.h> @@ -1157,7 +1159,7 @@ static void udc_disable(struct pxa2xx_udc *dev) #ifdef CONFIG_ARCH_PXA /* Disable clock for USB device */ - pxa_set_cken(CKEN_USB, 0); + clk_disable(dev->clk); #endif ep0_idle (dev); @@ -1202,8 +1204,7 @@ static void udc_enable (struct pxa2xx_udc *dev) #ifdef CONFIG_ARCH_PXA /* Enable clock for USB device */ - pxa_set_cken(CKEN_USB, 1); - udelay(5); + clk_enable(dev->clk); #endif /* try to clear these bits before we enable the udc */ @@ -2137,6 +2138,14 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev) if (irq < 0) return -ENODEV; +#ifdef CONFIG_ARCH_PXA + dev->clk = clk_get(&pdev->dev, "UDCCLK"); + if (IS_ERR(dev->clk)) { + retval = PTR_ERR(dev->clk); + goto err_clk; + } +#endif + pr_debug("%s: IRQ %d%s%s\n", driver_name, irq, dev->has_cfr ? "" : " (!cfr)", SIZE_STR "(pio)" @@ -2152,11 +2161,10 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "can't get vbus gpio %d, err: %d\n", dev->mach->gpio_vbus, retval); - return -EBUSY; + goto err_gpio_vbus; } gpio_direction_input(dev->mach->gpio_vbus); vbus_irq = gpio_to_irq(dev->mach->gpio_vbus); - set_irq_type(vbus_irq, IRQT_BOTHEDGE); } else vbus_irq = 0; @@ -2166,9 +2174,7 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "can't get pullup gpio %d, err: %d\n", dev->mach->gpio_pullup, retval); - if (dev->mach->gpio_vbus) - gpio_free(dev->mach->gpio_vbus); - return -EBUSY; + goto err_gpio_pullup; } gpio_direction_output(dev->mach->gpio_pullup, 0); } @@ -2195,11 +2201,7 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev) if (retval != 0) { printk(KERN_ERR "%s: can't get irq %d, err %d\n", driver_name, irq, retval); - if (dev->mach->gpio_pullup) - gpio_free(dev->mach->gpio_pullup); - if (dev->mach->gpio_vbus) - gpio_free(dev->mach->gpio_vbus); - return -EBUSY; + goto err_irq1; } dev->got_irq = 1; @@ -2213,12 +2215,7 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev) printk(KERN_ERR "%s: can't get irq %i, err %d\n", driver_name, LUBBOCK_USB_DISC_IRQ, retval); lubbock_fail0: - free_irq(irq, dev); - if (dev->mach->gpio_pullup) - gpio_free(dev->mach->gpio_pullup); - if (dev->mach->gpio_vbus) - gpio_free(dev->mach->gpio_vbus); - return -EBUSY; + goto err_irq_lub; } retval = request_irq(LUBBOCK_USB_IRQ, lubbock_vbus_irq, @@ -2234,22 +2231,37 @@ lubbock_fail0: #endif if (vbus_irq) { retval = request_irq(vbus_irq, udc_vbus_irq, - IRQF_DISABLED | IRQF_SAMPLE_RANDOM, + IRQF_DISABLED | IRQF_SAMPLE_RANDOM | + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, driver_name, dev); if (retval != 0) { printk(KERN_ERR "%s: can't get irq %i, err %d\n", driver_name, vbus_irq, retval); - free_irq(irq, dev); - if (dev->mach->gpio_pullup) - gpio_free(dev->mach->gpio_pullup); - if (dev->mach->gpio_vbus) - gpio_free(dev->mach->gpio_vbus); - return -EBUSY; + goto err_vbus_irq; } } create_proc_files(); return 0; + + err_vbus_irq: +#ifdef CONFIG_ARCH_LUBBOCK + free_irq(LUBBOCK_USB_DISC_IRQ, dev); + err_irq_lub: +#endif + free_irq(irq, dev); + err_irq1: + if (dev->mach->gpio_pullup) + gpio_free(dev->mach->gpio_pullup); + err_gpio_pullup: + if (dev->mach->gpio_vbus) + gpio_free(dev->mach->gpio_vbus); + err_gpio_vbus: +#ifdef CONFIG_ARCH_PXA + clk_put(dev->clk); + err_clk: +#endif + return retval; } static void pxa2xx_udc_shutdown(struct platform_device *_dev) @@ -2284,6 +2296,10 @@ static int __exit pxa2xx_udc_remove(struct platform_device *pdev) if (dev->mach->gpio_pullup) gpio_free(dev->mach->gpio_pullup); +#ifdef CONFIG_ARCH_PXA + clk_put(dev->clk); +#endif + platform_set_drvdata(pdev, NULL); the_controller = NULL; return 0; diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa2xx_udc.h index 0e5d0e6fb0e..1db46d70577 100644 --- a/drivers/usb/gadget/pxa2xx_udc.h +++ b/drivers/usb/gadget/pxa2xx_udc.h @@ -125,6 +125,7 @@ struct pxa2xx_udc { struct timer_list timer; struct device *dev; + struct clk *clk; struct pxa2xx_udc_mach_info *mach; u64 dma_mask; struct pxa2xx_ep ep [PXA_UDC_NUM_ENDPOINTS]; diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index 0be80c635c4..e3e90f8a75e 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -42,7 +42,7 @@ #include <linux/seq_file.h> #include <linux/usb.h> -#include <linux/usb_gadget.h> +#include <linux/usb/gadget.h> #include <asm/byteorder.h> #include <asm/io.h> diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c index ce4d2e09633..f5738eb8e76 100644 --- a/drivers/usb/gadget/serial.c +++ b/drivers/usb/gadget/serial.c @@ -17,34 +17,15 @@ * */ -#include <linux/module.h> #include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/ioport.h> -#include <linux/slab.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/timer.h> -#include <linux/list.h> -#include <linux/interrupt.h> #include <linux/utsname.h> -#include <linux/wait.h> -#include <linux/proc_fs.h> #include <linux/device.h> #include <linux/tty.h> #include <linux/tty_flip.h> -#include <linux/mutex.h> - -#include <asm/byteorder.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/system.h> -#include <asm/unaligned.h> -#include <asm/uaccess.h> #include <linux/usb/ch9.h> #include <linux/usb/cdc.h> -#include <linux/usb_gadget.h> +#include <linux/usb/gadget.h> #include "gadget_chips.h" @@ -89,30 +70,29 @@ #define GS_DEFAULT_PARITY USB_CDC_NO_PARITY #define GS_DEFAULT_CHAR_FORMAT USB_CDC_1_STOP_BITS -/* select highspeed/fullspeed, hiding highspeed if not configured */ -#ifdef CONFIG_USB_GADGET_DUALSPEED -#define GS_SPEED_SELECT(is_hs,hs,fs) ((is_hs) ? (hs) : (fs)) -#else -#define GS_SPEED_SELECT(is_hs,hs,fs) (fs) -#endif /* CONFIG_USB_GADGET_DUALSPEED */ +/* maxpacket and other transfer characteristics vary by speed. */ +static inline struct usb_endpoint_descriptor * +choose_ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *hs, + struct usb_endpoint_descriptor *fs) +{ + if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH) + return hs; + return fs; +} + /* debug settings */ -#ifdef GS_DEBUG +#ifdef DEBUG static int debug = 1; +#else +#define debug 0 +#endif #define gs_debug(format, arg...) \ do { if (debug) printk(KERN_DEBUG format, ## arg); } while(0) #define gs_debug_level(level, format, arg...) \ do { if (debug>=level) printk(KERN_DEBUG format, ## arg); } while(0) -#else - -#define gs_debug(format, arg...) \ - do { } while(0) -#define gs_debug_level(level, format, arg...) \ - do { } while(0) - -#endif /* GS_DEBUG */ /* Thanks to NetChip Technologies for donating this product ID. * @@ -147,10 +127,10 @@ struct gs_req_entry { /* the port structure holds info for each port, one for each minor number */ struct gs_port { - struct gs_dev *port_dev; /* pointer to device struct */ + struct gs_dev *port_dev; /* pointer to device struct */ struct tty_struct *port_tty; /* pointer to tty struct */ spinlock_t port_lock; - int port_num; + int port_num; int port_open_count; int port_in_use; /* open/close in progress */ wait_queue_head_t port_write_wait;/* waiting to write */ @@ -188,7 +168,7 @@ static void __exit gs_module_exit(void); /* tty driver */ static int gs_open(struct tty_struct *tty, struct file *file); static void gs_close(struct tty_struct *tty, struct file *file); -static int gs_write(struct tty_struct *tty, +static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count); static void gs_put_char(struct tty_struct *tty, unsigned char ch); static void gs_flush_chars(struct tty_struct *tty); @@ -222,7 +202,7 @@ static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req); static void gs_disconnect(struct usb_gadget *gadget); static int gs_set_config(struct gs_dev *dev, unsigned config); static void gs_reset_config(struct gs_dev *dev); -static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed, +static int gs_build_config_buf(u8 *buf, struct usb_gadget *g, u8 type, unsigned int index, int is_otg); static struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned int len, @@ -415,18 +395,18 @@ static const struct usb_cdc_header_desc gs_header_desc = { }; static const struct usb_cdc_call_mgmt_descriptor gs_call_mgmt_descriptor = { - .bLength = sizeof(gs_call_mgmt_descriptor), - .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE, - .bmCapabilities = 0, - .bDataInterface = 1, /* index of data interface */ + .bLength = sizeof(gs_call_mgmt_descriptor), + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubType = USB_CDC_CALL_MANAGEMENT_TYPE, + .bmCapabilities = 0, + .bDataInterface = 1, /* index of data interface */ }; static struct usb_cdc_acm_descriptor gs_acm_descriptor = { - .bLength = sizeof(gs_acm_descriptor), - .bDescriptorType = USB_DT_CS_INTERFACE, - .bDescriptorSubType = USB_CDC_ACM_TYPE, - .bmCapabilities = 0, + .bLength = sizeof(gs_acm_descriptor), + .bDescriptorType = USB_DT_CS_INTERFACE, + .bDescriptorSubType = USB_CDC_ACM_TYPE, + .bmCapabilities = 0, }; static const struct usb_cdc_union_desc gs_union_desc = { @@ -436,7 +416,7 @@ static const struct usb_cdc_union_desc gs_union_desc = { .bMasterInterface0 = 0, /* index of control interface */ .bSlaveInterface0 = 1, /* index of data interface */ }; - + static struct usb_endpoint_descriptor gs_fullspeed_notify_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, @@ -482,7 +462,6 @@ static const struct usb_descriptor_header *gs_acm_fullspeed_function[] = { NULL, }; -#ifdef CONFIG_USB_GADGET_DUALSPEED static struct usb_endpoint_descriptor gs_highspeed_notify_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, @@ -536,15 +515,13 @@ static const struct usb_descriptor_header *gs_acm_highspeed_function[] = { NULL, }; -#endif /* CONFIG_USB_GADGET_DUALSPEED */ - /* Module */ MODULE_DESCRIPTION(GS_LONG_NAME); MODULE_AUTHOR("Al Borchers"); MODULE_LICENSE("GPL"); -#ifdef GS_DEBUG +#ifdef DEBUG module_param(debug, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(debug, "Enable debugging, 0=off, 1=on"); #endif @@ -915,7 +892,8 @@ static void gs_put_char(struct tty_struct *tty, unsigned char ch) return; } - gs_debug("gs_put_char: (%d,%p) char=0x%x, called from %p, %p, %p\n", port->port_num, tty, ch, __builtin_return_address(0), __builtin_return_address(1), __builtin_return_address(2)); + gs_debug("gs_put_char: (%d,%p) char=0x%x, called from %p\n", + port->port_num, tty, ch, __builtin_return_address(0)); spin_lock_irqsave(&port->port_lock, flags); @@ -1116,7 +1094,11 @@ static int gs_send(struct gs_dev *dev) len = gs_send_packet(dev, req->buf, ep->maxpacket); if (len > 0) { -gs_debug_level(3, "gs_send: len=%d, 0x%2.2x 0x%2.2x 0x%2.2x ...\n", len, *((unsigned char *)req->buf), *((unsigned char *)req->buf+1), *((unsigned char *)req->buf+2)); + gs_debug_level(3, "gs_send: len=%d, 0x%2.2x " + "0x%2.2x 0x%2.2x ...\n", len, + *((unsigned char *)req->buf), + *((unsigned char *)req->buf+1), + *((unsigned char *)req->buf+2)); list_del(&req_entry->re_entry); req->length = len; spin_unlock_irqrestore(&dev->dev_lock, flags); @@ -1269,7 +1251,7 @@ static void gs_read_complete(struct usb_ep *ep, struct usb_request *req) switch(req->status) { case 0: - /* normal completion */ + /* normal completion */ gs_recv_packet(dev, req->buf, req->actual); requeue: req->length = ep->maxpacket; @@ -1406,23 +1388,24 @@ static int __init gs_bind(struct usb_gadget *gadget) ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC; gs_device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket; -#ifdef CONFIG_USB_GADGET_DUALSPEED - gs_qualifier_desc.bDeviceClass = use_acm - ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC; - /* assume ep0 uses the same packet size for both speeds */ - gs_qualifier_desc.bMaxPacketSize0 = gs_device_desc.bMaxPacketSize0; - /* assume endpoints are dual-speed */ - gs_highspeed_notify_desc.bEndpointAddress = - gs_fullspeed_notify_desc.bEndpointAddress; - gs_highspeed_in_desc.bEndpointAddress = - gs_fullspeed_in_desc.bEndpointAddress; - gs_highspeed_out_desc.bEndpointAddress = - gs_fullspeed_out_desc.bEndpointAddress; -#endif /* CONFIG_USB_GADGET_DUALSPEED */ + if (gadget_is_dualspeed(gadget)) { + gs_qualifier_desc.bDeviceClass = use_acm + ? USB_CLASS_COMM : USB_CLASS_VENDOR_SPEC; + /* assume ep0 uses the same packet size for both speeds */ + gs_qualifier_desc.bMaxPacketSize0 = + gs_device_desc.bMaxPacketSize0; + /* assume endpoints are dual-speed */ + gs_highspeed_notify_desc.bEndpointAddress = + gs_fullspeed_notify_desc.bEndpointAddress; + gs_highspeed_in_desc.bEndpointAddress = + gs_fullspeed_in_desc.bEndpointAddress; + gs_highspeed_out_desc.bEndpointAddress = + gs_fullspeed_out_desc.bEndpointAddress; + } usb_gadget_set_selfpowered(gadget); - if (gadget->is_otg) { + if (gadget_is_otg(gadget)) { gs_otg_descriptor.bmAttributes |= USB_OTG_HNP, gs_bulk_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP; gs_acm_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP; @@ -1487,6 +1470,12 @@ static void /* __init_or_exit */ gs_unbind(struct usb_gadget *gadget) dev->dev_ctrl_req = NULL; } gs_free_ports(dev); + if (dev->dev_notify_ep) + usb_ep_disable(dev->dev_notify_ep); + if (dev->dev_in_ep) + usb_ep_disable(dev->dev_in_ep); + if (dev->dev_out_ep) + usb_ep_disable(dev->dev_out_ep); kfree(dev); set_gadget_data(gadget, NULL); } @@ -1570,9 +1559,8 @@ static int gs_setup_standard(struct usb_gadget *gadget, memcpy(req->buf, &gs_device_desc, ret); break; -#ifdef CONFIG_USB_GADGET_DUALSPEED case USB_DT_DEVICE_QUALIFIER: - if (!gadget->is_dualspeed) + if (!gadget_is_dualspeed(gadget)) break; ret = min(wLength, (u16)sizeof(struct usb_qualifier_descriptor)); @@ -1580,14 +1568,13 @@ static int gs_setup_standard(struct usb_gadget *gadget, break; case USB_DT_OTHER_SPEED_CONFIG: - if (!gadget->is_dualspeed) + if (!gadget_is_dualspeed(gadget)) break; /* fall through */ -#endif /* CONFIG_USB_GADGET_DUALSPEED */ case USB_DT_CONFIG: - ret = gs_build_config_buf(req->buf, gadget->speed, + ret = gs_build_config_buf(req->buf, gadget, wValue >> 8, wValue & 0xff, - gadget->is_otg); + gadget_is_otg(gadget)); if (ret >= 0) ret = min(wLength, (u16)ret); break; @@ -1827,8 +1814,7 @@ static int gs_set_config(struct gs_dev *dev, unsigned config) if (EP_NOTIFY_NAME && strcmp(ep->name, EP_NOTIFY_NAME) == 0) { - ep_desc = GS_SPEED_SELECT( - gadget->speed == USB_SPEED_HIGH, + ep_desc = choose_ep_desc(gadget, &gs_highspeed_notify_desc, &gs_fullspeed_notify_desc); ret = usb_ep_enable(ep,ep_desc); @@ -1844,9 +1830,8 @@ static int gs_set_config(struct gs_dev *dev, unsigned config) } else if (strcmp(ep->name, EP_IN_NAME) == 0) { - ep_desc = GS_SPEED_SELECT( - gadget->speed == USB_SPEED_HIGH, - &gs_highspeed_in_desc, + ep_desc = choose_ep_desc(gadget, + &gs_highspeed_in_desc, &gs_fullspeed_in_desc); ret = usb_ep_enable(ep,ep_desc); if (ret == 0) { @@ -1861,8 +1846,7 @@ static int gs_set_config(struct gs_dev *dev, unsigned config) } else if (strcmp(ep->name, EP_OUT_NAME) == 0) { - ep_desc = GS_SPEED_SELECT( - gadget->speed == USB_SPEED_HIGH, + ep_desc = choose_ep_desc(gadget, &gs_highspeed_out_desc, &gs_fullspeed_out_desc); ret = usb_ep_enable(ep,ep_desc); @@ -1981,11 +1965,11 @@ static void gs_reset_config(struct gs_dev *dev) * Builds the config descriptors in the given buffer and returns the * length, or a negative error number. */ -static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed, +static int gs_build_config_buf(u8 *buf, struct usb_gadget *g, u8 type, unsigned int index, int is_otg) { int len; - int high_speed; + int high_speed = 0; const struct usb_config_descriptor *config_desc; const struct usb_descriptor_header **function; @@ -1993,20 +1977,22 @@ static int gs_build_config_buf(u8 *buf, enum usb_device_speed speed, return -EINVAL; /* other speed switches high and full speed */ - high_speed = (speed == USB_SPEED_HIGH); - if (type == USB_DT_OTHER_SPEED_CONFIG) - high_speed = !high_speed; + if (gadget_is_dualspeed(g)) { + high_speed = (g->speed == USB_SPEED_HIGH); + if (type == USB_DT_OTHER_SPEED_CONFIG) + high_speed = !high_speed; + } if (use_acm) { config_desc = &gs_acm_config_desc; - function = GS_SPEED_SELECT(high_speed, - gs_acm_highspeed_function, - gs_acm_fullspeed_function); + function = high_speed + ? gs_acm_highspeed_function + : gs_acm_fullspeed_function; } else { config_desc = &gs_bulk_config_desc; - function = GS_SPEED_SELECT(high_speed, - gs_bulk_highspeed_function, - gs_bulk_fullspeed_function); + function = high_speed + ? gs_bulk_highspeed_function + : gs_bulk_fullspeed_function; } /* for now, don't advertise srp-only devices */ diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c index 3459ea6c6c0..878e428a0ec 100644 --- a/drivers/usb/gadget/usbstring.c +++ b/drivers/usb/gadget/usbstring.c @@ -15,7 +15,7 @@ #include <linux/init.h> #include <linux/usb/ch9.h> -#include <linux/usb_gadget.h> +#include <linux/usb/gadget.h> #include <asm/unaligned.h> diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index fcfe869acb9..fcde5d9c87d 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -1,38 +1,22 @@ /* * zero.c -- Gadget Zero, for USB development * - * Copyright (C) 2003-2004 David Brownell + * Copyright (C) 2003-2007 David Brownell * All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation, either version 2 of that License or (at your option) any - * later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ @@ -57,40 +41,28 @@ * Many drivers will only have one configuration, letting them be much * simpler if they also don't support high speed operation (like this * driver does). + * + * Why is *this* driver using two configurations, rather than setting up + * two interfaces with different functions? To help verify that multiple + * configuration infrastucture is working correctly; also, so that it can + * work with low capability USB controllers without four bulk endpoints. */ -#define DEBUG 1 -// #define VERBOSE +/* #define VERBOSE_DEBUG */ -#include <linux/module.h> #include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/ioport.h> -#include <linux/slab.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/timer.h> -#include <linux/list.h> -#include <linux/interrupt.h> #include <linux/utsname.h> #include <linux/device.h> -#include <linux/moduleparam.h> - -#include <asm/byteorder.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/system.h> -#include <asm/unaligned.h> #include <linux/usb/ch9.h> -#include <linux/usb_gadget.h> +#include <linux/usb/gadget.h> #include "gadget_chips.h" /*-------------------------------------------------------------------------*/ -#define DRIVER_VERSION "St Patrick's Day 2004" +#define DRIVER_VERSION "Lughnasadh, 2007" static const char shortname [] = "zero"; static const char longname [] = "Gadget Zero"; @@ -131,30 +103,16 @@ struct zero_dev { struct timer_list resume; }; -#define xprintk(d,level,fmt,args...) \ - dev_printk(level , &(d)->gadget->dev , fmt , ## args) - -#ifdef DEBUG -#define DBG(dev,fmt,args...) \ - xprintk(dev , KERN_DEBUG , fmt , ## args) -#else -#define DBG(dev,fmt,args...) \ - do { } while (0) -#endif /* DEBUG */ - -#ifdef VERBOSE -#define VDBG DBG -#else -#define VDBG(dev,fmt,args...) \ - do { } while (0) -#endif /* VERBOSE */ - -#define ERROR(dev,fmt,args...) \ - xprintk(dev , KERN_ERR , fmt , ## args) -#define WARN(dev,fmt,args...) \ - xprintk(dev , KERN_WARNING , fmt , ## args) -#define INFO(dev,fmt,args...) \ - xprintk(dev , KERN_INFO , fmt , ## args) +#define DBG(d, fmt, args...) \ + dev_dbg(&(d)->gadget->dev , fmt , ## args) +#define VDBG(d, fmt, args...) \ + dev_vdbg(&(d)->gadget->dev , fmt , ## args) +#define ERROR(d, fmt, args...) \ + dev_err(&(d)->gadget->dev , fmt , ## args) +#define WARN(d, fmt, args...) \ + dev_warn(&(d)->gadget->dev , fmt , ## args) +#define INFO(d, fmt, args...) \ + dev_info(&(d)->gadget->dev , fmt , ## args) /*-------------------------------------------------------------------------*/ @@ -326,8 +284,6 @@ static const struct usb_descriptor_header *fs_loopback_function [] = { NULL, }; -#ifdef CONFIG_USB_GADGET_DUALSPEED - /* * usb 2.0 devices need to expose both high speed and full speed * descriptors, unless they only run at full speed. @@ -383,17 +339,20 @@ static const struct usb_descriptor_header *hs_loopback_function [] = { }; /* maxpacket and other transfer characteristics vary by speed. */ -#define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs)) - -#else +static inline struct usb_endpoint_descriptor * +ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *hs, + struct usb_endpoint_descriptor *fs) +{ + if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH) + return hs; + return fs; +} -/* if there's no high speed support, maxpacket doesn't change. */ -#define ep_desc(g,hs,fs) fs +static char manufacturer[50]; -#endif /* !CONFIG_USB_GADGET_DUALSPEED */ +/* default serial number takes at least two packets */ +static char serial[] = "0123456789.0123456789.0123456789"; -static char manufacturer [50]; -static char serial [40]; /* static strings, in UTF-8 */ static struct usb_string strings [] = { @@ -435,30 +394,29 @@ config_buf (struct usb_gadget *gadget, int is_source_sink; int len; const struct usb_descriptor_header **function; -#ifdef CONFIG_USB_GADGET_DUALSPEED - int hs = (gadget->speed == USB_SPEED_HIGH); -#endif + int hs = 0; /* two configurations will always be index 0 and index 1 */ if (index > 1) return -EINVAL; is_source_sink = loopdefault ? (index == 1) : (index == 0); -#ifdef CONFIG_USB_GADGET_DUALSPEED - if (type == USB_DT_OTHER_SPEED_CONFIG) - hs = !hs; + if (gadget_is_dualspeed(gadget)) { + hs = (gadget->speed == USB_SPEED_HIGH); + if (type == USB_DT_OTHER_SPEED_CONFIG) + hs = !hs; + } if (hs) function = is_source_sink ? hs_source_sink_function : hs_loopback_function; else -#endif function = is_source_sink ? fs_source_sink_function : fs_loopback_function; /* for now, don't advertise srp-only devices */ - if (!gadget->is_otg) + if (!gadget_is_otg(gadget)) function++; len = usb_gadget_config_buf (is_source_sink @@ -498,6 +456,19 @@ static void free_ep_req (struct usb_ep *ep, struct usb_request *req) /*-------------------------------------------------------------------------*/ +/* + * SOURCE/SINK FUNCTION ... a primary testing vehicle for USB peripherals, + * this just sinks bulk packets OUT to the peripheral and sources them IN + * to the host, optionally with specific data patterns. + * + * In terms of control messaging, this supports all the standard requests + * plus two that support control-OUT tests. + * + * Note that because this doesn't queue more than one request at a time, + * some other function must be used to test queueing logic. The network + * link (g_ether) is probably the best option for that. + */ + /* optionally require specific source/sink data patterns */ static int @@ -534,12 +505,7 @@ check_read_data ( return 0; } -static void -reinit_write_data ( - struct zero_dev *dev, - struct usb_ep *ep, - struct usb_request *req -) +static void reinit_write_data(struct usb_ep *ep, struct usb_request *req) { unsigned i; u8 *buf = req->buf; @@ -566,16 +532,16 @@ static void source_sink_complete (struct usb_ep *ep, struct usb_request *req) switch (status) { - case 0: /* normal completion? */ + case 0: /* normal completion? */ if (ep == dev->out_ep) { check_read_data (dev, ep, req); memset (req->buf, 0x55, req->length); } else - reinit_write_data (dev, ep, req); + reinit_write_data(ep, req); break; /* this endpoint is normally active while we're configured */ - case -ECONNABORTED: /* hardware forced ep reset */ + case -ECONNABORTED: /* hardware forced ep reset */ case -ECONNRESET: /* request dequeued */ case -ESHUTDOWN: /* disconnect from host */ VDBG (dev, "%s gone (%d), %d/%d\n", ep->name, status, @@ -607,8 +573,7 @@ static void source_sink_complete (struct usb_ep *ep, struct usb_request *req) } } -static struct usb_request * -source_sink_start_ep (struct usb_ep *ep, gfp_t gfp_flags) +static struct usb_request *source_sink_start_ep(struct usb_ep *ep) { struct usb_request *req; int status; @@ -621,11 +586,11 @@ source_sink_start_ep (struct usb_ep *ep, gfp_t gfp_flags) req->complete = source_sink_complete; if (strcmp (ep->name, EP_IN_NAME) == 0) - reinit_write_data (ep->driver_data, ep, req); + reinit_write_data(ep, req); else memset (req->buf, 0x55, req->length); - status = usb_ep_queue (ep, req, gfp_flags); + status = usb_ep_queue(ep, req, GFP_ATOMIC); if (status) { struct zero_dev *dev = ep->driver_data; @@ -637,8 +602,7 @@ source_sink_start_ep (struct usb_ep *ep, gfp_t gfp_flags) return req; } -static int -set_source_sink_config (struct zero_dev *dev, gfp_t gfp_flags) +static int set_source_sink_config(struct zero_dev *dev) { int result = 0; struct usb_ep *ep; @@ -653,8 +617,7 @@ set_source_sink_config (struct zero_dev *dev, gfp_t gfp_flags) result = usb_ep_enable (ep, d); if (result == 0) { ep->driver_data = dev; - if (source_sink_start_ep(ep, gfp_flags) - != NULL) { + if (source_sink_start_ep(ep) != NULL) { dev->in_ep = ep; continue; } @@ -668,8 +631,7 @@ set_source_sink_config (struct zero_dev *dev, gfp_t gfp_flags) result = usb_ep_enable (ep, d); if (result == 0) { ep->driver_data = dev; - if (source_sink_start_ep(ep, gfp_flags) - != NULL) { + if (source_sink_start_ep(ep) != NULL) { dev->out_ep = ep; continue; } @@ -701,7 +663,7 @@ static void loopback_complete (struct usb_ep *ep, struct usb_request *req) switch (status) { - case 0: /* normal completion? */ + case 0: /* normal completion? */ if (ep == dev->out_ep) { /* loop this OUT packet back IN to the host */ req->zero = (req->actual < req->length); @@ -735,7 +697,7 @@ static void loopback_complete (struct usb_ep *ep, struct usb_request *req) * rely on the hardware driver to clean up on disconnect or * endpoint disable. */ - case -ECONNABORTED: /* hardware forced ep reset */ + case -ECONNABORTED: /* hardware forced ep reset */ case -ECONNRESET: /* request dequeued */ case -ESHUTDOWN: /* disconnect from host */ free_ep_req (ep, req); @@ -743,8 +705,7 @@ static void loopback_complete (struct usb_ep *ep, struct usb_request *req) } } -static int -set_loopback_config (struct zero_dev *dev, gfp_t gfp_flags) +static int set_loopback_config(struct zero_dev *dev) { int result = 0; struct usb_ep *ep; @@ -844,8 +805,7 @@ static void zero_reset_config (struct zero_dev *dev) * code can do, perhaps by disallowing more than one configuration or * by limiting configuration choices (like the pxa2xx). */ -static int -zero_set_config (struct zero_dev *dev, unsigned number, gfp_t gfp_flags) +static int zero_set_config(struct zero_dev *dev, unsigned number) { int result = 0; struct usb_gadget *gadget = dev->gadget; @@ -855,17 +815,17 @@ zero_set_config (struct zero_dev *dev, unsigned number, gfp_t gfp_flags) if (gadget_is_sa1100 (gadget) && dev->config) { /* tx fifo is full, but we can't clear it...*/ - INFO (dev, "can't change configurations\n"); + ERROR(dev, "can't change configurations\n"); return -ESPIPE; } zero_reset_config (dev); switch (number) { case CONFIG_SOURCE_SINK: - result = set_source_sink_config (dev, gfp_flags); + result = set_source_sink_config(dev); break; case CONFIG_LOOPBACK: - result = set_loopback_config (dev, gfp_flags); + result = set_loopback_config(dev); break; default: result = -EINVAL; @@ -885,7 +845,7 @@ zero_set_config (struct zero_dev *dev, unsigned number, gfp_t gfp_flags) case USB_SPEED_LOW: speed = "low"; break; case USB_SPEED_FULL: speed = "full"; break; case USB_SPEED_HIGH: speed = "high"; break; - default: speed = "?"; break; + default: speed = "?"; break; } dev->config = number; @@ -938,19 +898,17 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) value = min (w_length, (u16) sizeof device_desc); memcpy (req->buf, &device_desc, value); break; -#ifdef CONFIG_USB_GADGET_DUALSPEED case USB_DT_DEVICE_QUALIFIER: - if (!gadget->is_dualspeed) + if (!gadget_is_dualspeed(gadget)) break; value = min (w_length, (u16) sizeof dev_qualifier); memcpy (req->buf, &dev_qualifier, value); break; case USB_DT_OTHER_SPEED_CONFIG: - if (!gadget->is_dualspeed) + if (!gadget_is_dualspeed(gadget)) break; // FALLTHROUGH -#endif /* CONFIG_USB_GADGET_DUALSPEED */ case USB_DT_CONFIG: value = config_buf (gadget, req->buf, w_value >> 8, @@ -984,7 +942,7 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) else VDBG (dev, "HNP inactive\n"); spin_lock (&dev->lock); - value = zero_set_config (dev, w_value, GFP_ATOMIC); + value = zero_set_config(dev, w_value); spin_unlock (&dev->lock); break; case USB_REQ_GET_CONFIGURATION: @@ -1013,7 +971,7 @@ zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) * use this "reset the config" shortcut. */ zero_reset_config (dev); - zero_set_config (dev, config, GFP_ATOMIC); + zero_set_config(dev, config); value = 0; } spin_unlock (&dev->lock); @@ -1163,7 +1121,7 @@ autoconf_fail: } EP_IN_NAME = ep->name; ep->driver_data = ep; /* claim */ - + ep = usb_ep_autoconfig (gadget, &fs_sink_desc); if (!ep) goto autoconf_fail; @@ -1207,16 +1165,18 @@ autoconf_fail: device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket; -#ifdef CONFIG_USB_GADGET_DUALSPEED - /* assume ep0 uses the same value for both speeds ... */ - dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0; + if (gadget_is_dualspeed(gadget)) { + /* assume ep0 uses the same value for both speeds ... */ + dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0; - /* and that all endpoints are dual-speed */ - hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress; - hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress; -#endif + /* and that all endpoints are dual-speed */ + hs_source_desc.bEndpointAddress = + fs_source_desc.bEndpointAddress; + hs_sink_desc.bEndpointAddress = + fs_sink_desc.bEndpointAddress; + } - if (gadget->is_otg) { + if (gadget_is_otg(gadget)) { otg_descriptor.bmAttributes |= USB_OTG_HNP, source_sink_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP; loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP; @@ -1294,23 +1254,18 @@ static struct usb_gadget_driver zero_driver = { .suspend = zero_suspend, .resume = zero_resume, - .driver = { + .driver = { .name = (char *) shortname, .owner = THIS_MODULE, }, }; -MODULE_AUTHOR ("David Brownell"); -MODULE_LICENSE ("Dual BSD/GPL"); +MODULE_AUTHOR("David Brownell"); +MODULE_LICENSE("GPL"); static int __init init (void) { - /* a real value would likely come through some id prom - * or module option. this one takes at least two packets. - */ - strlcpy (serial, "0123456789.0123456789.0123456789", sizeof serial); - return usb_gadget_register_driver (&zero_driver); } module_init (init); |