aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/host/r8a66597.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/r8a66597.h')
-rw-r--r--drivers/usb/host/r8a66597.h440
1 files changed, 34 insertions, 406 deletions
diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h
index d72680b433f..228e3fb2385 100644
--- a/drivers/usb/host/r8a66597.h
+++ b/drivers/usb/host/r8a66597.h
@@ -26,390 +26,16 @@
#ifndef __R8A66597_H__
#define __R8A66597_H__
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
+#ifdef CONFIG_HAVE_CLK
#include <linux/clk.h>
#endif
#include <linux/usb/r8a66597.h>
-#define SYSCFG0 0x00
-#define SYSCFG1 0x02
-#define SYSSTS0 0x04
-#define SYSSTS1 0x06
-#define DVSTCTR0 0x08
-#define DVSTCTR1 0x0A
-#define TESTMODE 0x0C
-#define PINCFG 0x0E
-#define DMA0CFG 0x10
-#define DMA1CFG 0x12
-#define CFIFO 0x14
-#define D0FIFO 0x18
-#define D1FIFO 0x1C
-#define CFIFOSEL 0x20
-#define CFIFOCTR 0x22
-#define CFIFOSIE 0x24
-#define D0FIFOSEL 0x28
-#define D0FIFOCTR 0x2A
-#define D1FIFOSEL 0x2C
-#define D1FIFOCTR 0x2E
-#define INTENB0 0x30
-#define INTENB1 0x32
-#define INTENB2 0x34
-#define BRDYENB 0x36
-#define NRDYENB 0x38
-#define BEMPENB 0x3A
-#define SOFCFG 0x3C
-#define INTSTS0 0x40
-#define INTSTS1 0x42
-#define INTSTS2 0x44
-#define BRDYSTS 0x46
-#define NRDYSTS 0x48
-#define BEMPSTS 0x4A
-#define FRMNUM 0x4C
-#define UFRMNUM 0x4E
-#define USBADDR 0x50
-#define USBREQ 0x54
-#define USBVAL 0x56
-#define USBINDX 0x58
-#define USBLENG 0x5A
-#define DCPCFG 0x5C
-#define DCPMAXP 0x5E
-#define DCPCTR 0x60
-#define PIPESEL 0x64
-#define PIPECFG 0x68
-#define PIPEBUF 0x6A
-#define PIPEMAXP 0x6C
-#define PIPEPERI 0x6E
-#define PIPE1CTR 0x70
-#define PIPE2CTR 0x72
-#define PIPE3CTR 0x74
-#define PIPE4CTR 0x76
-#define PIPE5CTR 0x78
-#define PIPE6CTR 0x7A
-#define PIPE7CTR 0x7C
-#define PIPE8CTR 0x7E
-#define PIPE9CTR 0x80
-#define PIPE1TRE 0x90
-#define PIPE1TRN 0x92
-#define PIPE2TRE 0x94
-#define PIPE2TRN 0x96
-#define PIPE3TRE 0x98
-#define PIPE3TRN 0x9A
-#define PIPE4TRE 0x9C
-#define PIPE4TRN 0x9E
-#define PIPE5TRE 0xA0
-#define PIPE5TRN 0xA2
-#define DEVADD0 0xD0
-#define DEVADD1 0xD2
-#define DEVADD2 0xD4
-#define DEVADD3 0xD6
-#define DEVADD4 0xD8
-#define DEVADD5 0xDA
-#define DEVADD6 0xDC
-#define DEVADD7 0xDE
-#define DEVADD8 0xE0
-#define DEVADD9 0xE2
-#define DEVADDA 0xE4
-
-/* System Configuration Control Register */
-#define XTAL 0xC000 /* b15-14: Crystal selection */
-#define XTAL48 0x8000 /* 48MHz */
-#define XTAL24 0x4000 /* 24MHz */
-#define XTAL12 0x0000 /* 12MHz */
-#define XCKE 0x2000 /* b13: External clock enable */
-#define PLLC 0x0800 /* b11: PLL control */
-#define SCKE 0x0400 /* b10: USB clock enable */
-#define PCSDIS 0x0200 /* b9: not CS wakeup */
-#define LPSME 0x0100 /* b8: Low power sleep mode */
-#define HSE 0x0080 /* b7: Hi-speed enable */
-#define DCFM 0x0040 /* b6: Controller function select */
-#define DRPD 0x0020 /* b5: D+/- pull down control */
-#define DPRPU 0x0010 /* b4: D+ pull up control */
-#define USBE 0x0001 /* b0: USB module operation enable */
-
-/* System Configuration Status Register */
-#define OVCBIT 0x8000 /* b15-14: Over-current bit */
-#define OVCMON 0xC000 /* b15-14: Over-current monitor */
-#define SOFEA 0x0020 /* b5: SOF monitor */
-#define IDMON 0x0004 /* b3: ID-pin monitor */
-#define LNST 0x0003 /* b1-0: D+, D- line status */
-#define SE1 0x0003 /* SE1 */
-#define FS_KSTS 0x0002 /* Full-Speed K State */
-#define FS_JSTS 0x0001 /* Full-Speed J State */
-#define LS_JSTS 0x0002 /* Low-Speed J State */
-#define LS_KSTS 0x0001 /* Low-Speed K State */
-#define SE0 0x0000 /* SE0 */
-
-/* Device State Control Register */
-#define EXTLP0 0x0400 /* b10: External port */
-#define VBOUT 0x0200 /* b9: VBUS output */
-#define WKUP 0x0100 /* b8: Remote wakeup */
-#define RWUPE 0x0080 /* b7: Remote wakeup sense */
-#define USBRST 0x0040 /* b6: USB reset enable */
-#define RESUME 0x0020 /* b5: Resume enable */
-#define UACT 0x0010 /* b4: USB bus enable */
-#define RHST 0x0007 /* b1-0: Reset handshake status */
-#define HSPROC 0x0004 /* HS handshake is processing */
-#define HSMODE 0x0003 /* Hi-Speed mode */
-#define FSMODE 0x0002 /* Full-Speed mode */
-#define LSMODE 0x0001 /* Low-Speed mode */
-#define UNDECID 0x0000 /* Undecided */
-
-/* Test Mode Register */
-#define UTST 0x000F /* b3-0: Test select */
-#define H_TST_PACKET 0x000C /* HOST TEST Packet */
-#define H_TST_SE0_NAK 0x000B /* HOST TEST SE0 NAK */
-#define H_TST_K 0x000A /* HOST TEST K */
-#define H_TST_J 0x0009 /* HOST TEST J */
-#define H_TST_NORMAL 0x0000 /* HOST Normal Mode */
-#define P_TST_PACKET 0x0004 /* PERI TEST Packet */
-#define P_TST_SE0_NAK 0x0003 /* PERI TEST SE0 NAK */
-#define P_TST_K 0x0002 /* PERI TEST K */
-#define P_TST_J 0x0001 /* PERI TEST J */
-#define P_TST_NORMAL 0x0000 /* PERI Normal Mode */
-
-/* Data Pin Configuration Register */
-#define LDRV 0x8000 /* b15: Drive Current Adjust */
-#define VIF1 0x0000 /* VIF = 1.8V */
-#define VIF3 0x8000 /* VIF = 3.3V */
-#define INTA 0x0001 /* b1: USB INT-pin active */
-
-/* DMAx Pin Configuration Register */
-#define DREQA 0x4000 /* b14: Dreq active select */
-#define BURST 0x2000 /* b13: Burst mode */
-#define DACKA 0x0400 /* b10: Dack active select */
-#define DFORM 0x0380 /* b9-7: DMA mode select */
-#define CPU_ADR_RD_WR 0x0000 /* Address + RD/WR mode (CPU bus) */
-#define CPU_DACK_RD_WR 0x0100 /* DACK + RD/WR mode (CPU bus) */
-#define CPU_DACK_ONLY 0x0180 /* DACK only mode (CPU bus) */
-#define SPLIT_DACK_ONLY 0x0200 /* DACK only mode (SPLIT bus) */
-#define DENDA 0x0040 /* b6: Dend active select */
-#define PKTM 0x0020 /* b5: Packet mode */
-#define DENDE 0x0010 /* b4: Dend enable */
-#define OBUS 0x0004 /* b2: OUTbus mode */
-
-/* CFIFO/DxFIFO Port Select Register */
-#define RCNT 0x8000 /* b15: Read count mode */
-#define REW 0x4000 /* b14: Buffer rewind */
-#define DCLRM 0x2000 /* b13: DMA buffer clear mode */
-#define DREQE 0x1000 /* b12: DREQ output enable */
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
-#define MBW 0x0800
-#else
-#define MBW 0x0400 /* b10: Maximum bit width for FIFO access */
-#endif
-#define MBW_8 0x0000 /* 8bit */
-#define MBW_16 0x0400 /* 16bit */
-#define BIGEND 0x0100 /* b8: Big endian mode */
-#define BYTE_LITTLE 0x0000 /* little dendian */
-#define BYTE_BIG 0x0100 /* big endifan */
-#define ISEL 0x0020 /* b5: DCP FIFO port direction select */
-#define CURPIPE 0x000F /* b2-0: PIPE select */
-
-/* CFIFO/DxFIFO Port Control Register */
-#define BVAL 0x8000 /* b15: Buffer valid flag */
-#define BCLR 0x4000 /* b14: Buffer clear */
-#define FRDY 0x2000 /* b13: FIFO ready */
-#define DTLN 0x0FFF /* b11-0: FIFO received data length */
-
-/* Interrupt Enable Register 0 */
-#define VBSE 0x8000 /* b15: VBUS interrupt */
-#define RSME 0x4000 /* b14: Resume interrupt */
-#define SOFE 0x2000 /* b13: Frame update interrupt */
-#define DVSE 0x1000 /* b12: Device state transition interrupt */
-#define CTRE 0x0800 /* b11: Control transfer stage transition interrupt */
-#define BEMPE 0x0400 /* b10: Buffer empty interrupt */
-#define NRDYE 0x0200 /* b9: Buffer not ready interrupt */
-#define BRDYE 0x0100 /* b8: Buffer ready interrupt */
-
-/* Interrupt Enable Register 1 */
-#define OVRCRE 0x8000 /* b15: Over-current interrupt */
-#define BCHGE 0x4000 /* b14: USB us chenge interrupt */
-#define DTCHE 0x1000 /* b12: Detach sense interrupt */
-#define ATTCHE 0x0800 /* b11: Attach sense interrupt */
-#define EOFERRE 0x0040 /* b6: EOF error interrupt */
-#define SIGNE 0x0020 /* b5: SETUP IGNORE interrupt */
-#define SACKE 0x0010 /* b4: SETUP ACK interrupt */
-
-/* BRDY Interrupt Enable/Status Register */
-#define BRDY9 0x0200 /* b9: PIPE9 */
-#define BRDY8 0x0100 /* b8: PIPE8 */
-#define BRDY7 0x0080 /* b7: PIPE7 */
-#define BRDY6 0x0040 /* b6: PIPE6 */
-#define BRDY5 0x0020 /* b5: PIPE5 */
-#define BRDY4 0x0010 /* b4: PIPE4 */
-#define BRDY3 0x0008 /* b3: PIPE3 */
-#define BRDY2 0x0004 /* b2: PIPE2 */
-#define BRDY1 0x0002 /* b1: PIPE1 */
-#define BRDY0 0x0001 /* b1: PIPE0 */
-
-/* NRDY Interrupt Enable/Status Register */
-#define NRDY9 0x0200 /* b9: PIPE9 */
-#define NRDY8 0x0100 /* b8: PIPE8 */
-#define NRDY7 0x0080 /* b7: PIPE7 */
-#define NRDY6 0x0040 /* b6: PIPE6 */
-#define NRDY5 0x0020 /* b5: PIPE5 */
-#define NRDY4 0x0010 /* b4: PIPE4 */
-#define NRDY3 0x0008 /* b3: PIPE3 */
-#define NRDY2 0x0004 /* b2: PIPE2 */
-#define NRDY1 0x0002 /* b1: PIPE1 */
-#define NRDY0 0x0001 /* b1: PIPE0 */
-
-/* BEMP Interrupt Enable/Status Register */
-#define BEMP9 0x0200 /* b9: PIPE9 */
-#define BEMP8 0x0100 /* b8: PIPE8 */
-#define BEMP7 0x0080 /* b7: PIPE7 */
-#define BEMP6 0x0040 /* b6: PIPE6 */
-#define BEMP5 0x0020 /* b5: PIPE5 */
-#define BEMP4 0x0010 /* b4: PIPE4 */
-#define BEMP3 0x0008 /* b3: PIPE3 */
-#define BEMP2 0x0004 /* b2: PIPE2 */
-#define BEMP1 0x0002 /* b1: PIPE1 */
-#define BEMP0 0x0001 /* b0: PIPE0 */
-
-/* SOF Pin Configuration Register */
-#define TRNENSEL 0x0100 /* b8: Select transaction enable period */
-#define BRDYM 0x0040 /* b6: BRDY clear timing */
-#define INTL 0x0020 /* b5: Interrupt sense select */
-#define EDGESTS 0x0010 /* b4: */
-#define SOFMODE 0x000C /* b3-2: SOF pin select */
-#define SOF_125US 0x0008 /* SOF OUT 125us Frame Signal */
-#define SOF_1MS 0x0004 /* SOF OUT 1ms Frame Signal */
-#define SOF_DISABLE 0x0000 /* SOF OUT Disable */
-
-/* Interrupt Status Register 0 */
-#define VBINT 0x8000 /* b15: VBUS interrupt */
-#define RESM 0x4000 /* b14: Resume interrupt */
-#define SOFR 0x2000 /* b13: SOF frame update interrupt */
-#define DVST 0x1000 /* b12: Device state transition interrupt */
-#define CTRT 0x0800 /* b11: Control transfer stage transition interrupt */
-#define BEMP 0x0400 /* b10: Buffer empty interrupt */
-#define NRDY 0x0200 /* b9: Buffer not ready interrupt */
-#define BRDY 0x0100 /* b8: Buffer ready interrupt */
-#define VBSTS 0x0080 /* b7: VBUS input port */
-#define DVSQ 0x0070 /* b6-4: Device state */
-#define DS_SPD_CNFG 0x0070 /* Suspend Configured */
-#define DS_SPD_ADDR 0x0060 /* Suspend Address */
-#define DS_SPD_DFLT 0x0050 /* Suspend Default */
-#define DS_SPD_POWR 0x0040 /* Suspend Powered */
-#define DS_SUSP 0x0040 /* Suspend */
-#define DS_CNFG 0x0030 /* Configured */
-#define DS_ADDS 0x0020 /* Address */
-#define DS_DFLT 0x0010 /* Default */
-#define DS_POWR 0x0000 /* Powered */
-#define DVSQS 0x0030 /* b5-4: Device state */
-#define VALID 0x0008 /* b3: Setup packet detected flag */
-#define CTSQ 0x0007 /* b2-0: Control transfer stage */
-#define CS_SQER 0x0006 /* Sequence error */
-#define CS_WRND 0x0005 /* Control write nodata status stage */
-#define CS_WRSS 0x0004 /* Control write status stage */
-#define CS_WRDS 0x0003 /* Control write data stage */
-#define CS_RDSS 0x0002 /* Control read status stage */
-#define CS_RDDS 0x0001 /* Control read data stage */
-#define CS_IDST 0x0000 /* Idle or setup stage */
-
-/* Interrupt Status Register 1 */
-#define OVRCR 0x8000 /* b15: Over-current interrupt */
-#define BCHG 0x4000 /* b14: USB bus chenge interrupt */
-#define DTCH 0x1000 /* b12: Detach sense interrupt */
-#define ATTCH 0x0800 /* b11: Attach sense interrupt */
-#define EOFERR 0x0040 /* b6: EOF-error interrupt */
-#define SIGN 0x0020 /* b5: Setup ignore interrupt */
-#define SACK 0x0010 /* b4: Setup acknowledge interrupt */
-
-/* Frame Number Register */
-#define OVRN 0x8000 /* b15: Overrun error */
-#define CRCE 0x4000 /* b14: Received data error */
-#define FRNM 0x07FF /* b10-0: Frame number */
-
-/* Micro Frame Number Register */
-#define UFRNM 0x0007 /* b2-0: Micro frame number */
-
-/* Default Control Pipe Maxpacket Size Register */
-/* Pipe Maxpacket Size Register */
-#define DEVSEL 0xF000 /* b15-14: Device address select */
-#define MAXP 0x007F /* b6-0: Maxpacket size of default control pipe */
-
-/* Default Control Pipe Control Register */
-#define BSTS 0x8000 /* b15: Buffer status */
-#define SUREQ 0x4000 /* b14: Send USB request */
-#define CSCLR 0x2000 /* b13: complete-split status clear */
-#define CSSTS 0x1000 /* b12: complete-split status */
-#define SUREQCLR 0x0800 /* b11: stop setup request */
-#define SQCLR 0x0100 /* b8: Sequence toggle bit clear */
-#define SQSET 0x0080 /* b7: Sequence toggle bit set */
-#define SQMON 0x0040 /* b6: Sequence toggle bit monitor */
-#define PBUSY 0x0020 /* b5: pipe busy */
-#define PINGE 0x0010 /* b4: ping enable */
-#define CCPL 0x0004 /* b2: Enable control transfer complete */
-#define PID 0x0003 /* b1-0: Response PID */
-#define PID_STALL11 0x0003 /* STALL */
-#define PID_STALL 0x0002 /* STALL */
-#define PID_BUF 0x0001 /* BUF */
-#define PID_NAK 0x0000 /* NAK */
-
-/* Pipe Window Select Register */
-#define PIPENM 0x0007 /* b2-0: Pipe select */
-
-/* Pipe Configuration Register */
-#define R8A66597_TYP 0xC000 /* b15-14: Transfer type */
-#define R8A66597_ISO 0xC000 /* Isochronous */
-#define R8A66597_INT 0x8000 /* Interrupt */
-#define R8A66597_BULK 0x4000 /* Bulk */
-#define R8A66597_BFRE 0x0400 /* b10: Buffer ready interrupt mode select */
-#define R8A66597_DBLB 0x0200 /* b9: Double buffer mode select */
-#define R8A66597_CNTMD 0x0100 /* b8: Continuous transfer mode select */
-#define R8A66597_SHTNAK 0x0080 /* b7: Transfer end NAK */
-#define R8A66597_DIR 0x0010 /* b4: Transfer direction select */
-#define R8A66597_EPNUM 0x000F /* b3-0: Eendpoint number select */
-
-/* Pipe Buffer Configuration Register */
-#define BUFSIZE 0x7C00 /* b14-10: Pipe buffer size */
-#define BUFNMB 0x007F /* b6-0: Pipe buffer number */
-#define PIPE0BUF 256
-#define PIPExBUF 64
-
-/* Pipe Maxpacket Size Register */
-#define MXPS 0x07FF /* b10-0: Maxpacket size */
-
-/* Pipe Cycle Configuration Register */
-#define IFIS 0x1000 /* b12: Isochronous in-buffer flush mode select */
-#define IITV 0x0007 /* b2-0: Isochronous interval */
-
-/* Pipex Control Register */
-#define BSTS 0x8000 /* b15: Buffer status */
-#define INBUFM 0x4000 /* b14: IN buffer monitor (Only for PIPE1 to 5) */
-#define CSCLR 0x2000 /* b13: complete-split status clear */
-#define CSSTS 0x1000 /* b12: complete-split status */
-#define ATREPM 0x0400 /* b10: Auto repeat mode */
-#define ACLRM 0x0200 /* b9: Out buffer auto clear mode */
-#define SQCLR 0x0100 /* b8: Sequence toggle bit clear */
-#define SQSET 0x0080 /* b7: Sequence toggle bit set */
-#define SQMON 0x0040 /* b6: Sequence toggle bit monitor */
-#define PBUSY 0x0020 /* b5: pipe busy */
-#define PID 0x0003 /* b1-0: Response PID */
-
-/* PIPExTRE */
-#define TRENB 0x0200 /* b9: Transaction counter enable */
-#define TRCLR 0x0100 /* b8: Transaction counter clear */
-
-/* PIPExTRN */
-#define TRNCNT 0xFFFF /* b15-0: Transaction counter */
-
-/* DEVADDx */
-#define UPPHUB 0x7800
-#define HUBPORT 0x0700
-#define USBSPD 0x00C0
-#define RTPORT 0x0001
-
#define R8A66597_MAX_NUM_PIPE 10
#define R8A66597_BUF_BSIZE 8
#define R8A66597_MAX_DEVICE 10
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
-#define R8A66597_MAX_ROOT_HUB 1
-#else
#define R8A66597_MAX_ROOT_HUB 2
-#endif
#define R8A66597_MAX_SAMPLING 5
#define R8A66597_RH_POLL_TIME 10
#define R8A66597_MAX_DMA_CHANNEL 2
@@ -487,7 +113,7 @@ struct r8a66597_root_hub {
struct r8a66597 {
spinlock_t lock;
unsigned long reg;
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) && defined(CONFIG_HAVE_CLK)
+#ifdef CONFIG_HAVE_CLK
struct clk *clk;
#endif
struct r8a66597_platdata *pdata;
@@ -504,6 +130,7 @@ struct r8a66597 {
unsigned short interval_map;
unsigned char pipe_cnt[R8A66597_MAX_NUM_PIPE];
unsigned char dma_map;
+ unsigned int max_root_hub;
struct list_head child_device;
unsigned long child_connect_map[4];
@@ -550,21 +177,22 @@ static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
unsigned long offset, u16 *buf,
int len)
{
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
unsigned long fifoaddr = r8a66597->reg + offset;
unsigned long count;
- count = len / 4;
- insl(fifoaddr, buf, count);
+ if (r8a66597->pdata->on_chip) {
+ count = len / 4;
+ insl(fifoaddr, buf, count);
- if (len & 0x00000003) {
- unsigned long tmp = inl(fifoaddr);
- memcpy((unsigned char *)buf + count * 4, &tmp, len & 0x03);
+ if (len & 0x00000003) {
+ unsigned long tmp = inl(fifoaddr);
+ memcpy((unsigned char *)buf + count * 4, &tmp,
+ len & 0x03);
+ }
+ } else {
+ len = (len + 1) / 2;
+ insw(fifoaddr, buf, len);
}
-#else
- len = (len + 1) / 2;
- insw(r8a66597->reg + offset, buf, len);
-#endif
}
static inline void r8a66597_write(struct r8a66597 *r8a66597, u16 val,
@@ -578,33 +206,33 @@ static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
int len)
{
unsigned long fifoaddr = r8a66597->reg + offset;
-#if defined(CONFIG_SUPERH_ON_CHIP_R8A66597)
unsigned long count;
unsigned char *pb;
int i;
- count = len / 4;
- outsl(fifoaddr, buf, count);
+ if (r8a66597->pdata->on_chip) {
+ count = len / 4;
+ outsl(fifoaddr, buf, count);
+
+ if (len & 0x00000003) {
+ pb = (unsigned char *)buf + count * 4;
+ for (i = 0; i < (len & 0x00000003); i++) {
+ if (r8a66597_read(r8a66597, CFIFOSEL) & BIGEND)
+ outb(pb[i], fifoaddr + i);
+ else
+ outb(pb[i], fifoaddr + 3 - i);
+ }
+ }
+ } else {
+ int odd = len & 0x0001;
- if (len & 0x00000003) {
- pb = (unsigned char *)buf + count * 4;
- for (i = 0; i < (len & 0x00000003); i++) {
- if (r8a66597_read(r8a66597, CFIFOSEL) & BIGEND)
- outb(pb[i], fifoaddr + i);
- else
- outb(pb[i], fifoaddr + 3 - i);
+ len = len / 2;
+ outsw(fifoaddr, buf, len);
+ if (unlikely(odd)) {
+ buf = &buf[len];
+ outb((unsigned char)*buf, fifoaddr);
}
}
-#else
- int odd = len & 0x0001;
-
- len = len / 2;
- outsw(fifoaddr, buf, len);
- if (unlikely(odd)) {
- buf = &buf[len];
- outb((unsigned char)*buf, fifoaddr);
- }
-#endif
}
static inline void r8a66597_mdfy(struct r8a66597 *r8a66597,