aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/host
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host')
-rw-r--r--drivers/usb/host/ehci-ixp4xx.c2
-rw-r--r--drivers/usb/host/ehci.h138
-rw-r--r--drivers/usb/host/sl811_cs.c133
3 files changed, 57 insertions, 216 deletions
diff --git a/drivers/usb/host/ehci-ixp4xx.c b/drivers/usb/host/ehci-ixp4xx.c
index f9575c40912..9c32063a0c2 100644
--- a/drivers/usb/host/ehci-ixp4xx.c
+++ b/drivers/usb/host/ehci-ixp4xx.c
@@ -1,7 +1,7 @@
/*
* IXP4XX EHCI Host Controller Driver
*
- * Author: Vladimir Barinov <vbarinov@ru.mvista.com>
+ * Author: Vladimir Barinov <vbarinov@embeddedalley.com>
*
* Based on "ehci-fsl.c" by Randy Vinson <rvinson@mvista.com>
*
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 5799298364f..b697a13364e 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -210,143 +210,7 @@ timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action)
/*-------------------------------------------------------------------------*/
-/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
-
-/* Section 2.2 Host Controller Capability Registers */
-struct ehci_caps {
- /* these fields are specified as 8 and 16 bit registers,
- * but some hosts can't perform 8 or 16 bit PCI accesses.
- */
- u32 hc_capbase;
-#define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */
-#define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */
- u32 hcs_params; /* HCSPARAMS - offset 0x4 */
-#define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */
-#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */
-#define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */
-#define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */
-#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */
-#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */
-#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */
-
- u32 hcc_params; /* HCCPARAMS - offset 0x8 */
-#define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */
-#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */
-#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */
-#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */
-#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/
-#define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */
- u8 portroute [8]; /* nibbles for routing - offset 0xC */
-} __attribute__ ((packed));
-
-
-/* Section 2.3 Host Controller Operational Registers */
-struct ehci_regs {
-
- /* USBCMD: offset 0x00 */
- u32 command;
-/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
-#define CMD_PARK (1<<11) /* enable "park" on async qh */
-#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */
-#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */
-#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */
-#define CMD_ASE (1<<5) /* async schedule enable */
-#define CMD_PSE (1<<4) /* periodic schedule enable */
-/* 3:2 is periodic frame list size */
-#define CMD_RESET (1<<1) /* reset HC not bus */
-#define CMD_RUN (1<<0) /* start/stop HC */
-
- /* USBSTS: offset 0x04 */
- u32 status;
-#define STS_ASS (1<<15) /* Async Schedule Status */
-#define STS_PSS (1<<14) /* Periodic Schedule Status */
-#define STS_RECL (1<<13) /* Reclamation */
-#define STS_HALT (1<<12) /* Not running (any reason) */
-/* some bits reserved */
- /* these STS_* flags are also intr_enable bits (USBINTR) */
-#define STS_IAA (1<<5) /* Interrupted on async advance */
-#define STS_FATAL (1<<4) /* such as some PCI access errors */
-#define STS_FLR (1<<3) /* frame list rolled over */
-#define STS_PCD (1<<2) /* port change detect */
-#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */
-#define STS_INT (1<<0) /* "normal" completion (short, ...) */
-
- /* USBINTR: offset 0x08 */
- u32 intr_enable;
-
- /* FRINDEX: offset 0x0C */
- u32 frame_index; /* current microframe number */
- /* CTRLDSSEGMENT: offset 0x10 */
- u32 segment; /* address bits 63:32 if needed */
- /* PERIODICLISTBASE: offset 0x14 */
- u32 frame_list; /* points to periodic list */
- /* ASYNCLISTADDR: offset 0x18 */
- u32 async_next; /* address of next async queue head */
-
- u32 reserved [9];
-
- /* CONFIGFLAG: offset 0x40 */
- u32 configured_flag;
-#define FLAG_CF (1<<0) /* true: we'll support "high speed" */
-
- /* PORTSC: offset 0x44 */
- u32 port_status [0]; /* up to N_PORTS */
-/* 31:23 reserved */
-#define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */
-#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */
-#define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */
-/* 19:16 for port testing */
-#define PORT_LED_OFF (0<<14)
-#define PORT_LED_AMBER (1<<14)
-#define PORT_LED_GREEN (2<<14)
-#define PORT_LED_MASK (3<<14)
-#define PORT_OWNER (1<<13) /* true: companion hc owns this port */
-#define PORT_POWER (1<<12) /* true: has power (see PPC) */
-#define PORT_USB11(x) (((x)&(3<<10))==(1<<10)) /* USB 1.1 device */
-/* 11:10 for detecting lowspeed devices (reset vs release ownership) */
-/* 9 reserved */
-#define PORT_RESET (1<<8) /* reset port */
-#define PORT_SUSPEND (1<<7) /* suspend port */
-#define PORT_RESUME (1<<6) /* resume it */
-#define PORT_OCC (1<<5) /* over current change */
-#define PORT_OC (1<<4) /* over current active */
-#define PORT_PEC (1<<3) /* port enable change */
-#define PORT_PE (1<<2) /* port enable */
-#define PORT_CSC (1<<1) /* connect status change */
-#define PORT_CONNECT (1<<0) /* device connected */
-#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC)
-} __attribute__ ((packed));
-
-#define USBMODE 0x68 /* USB Device mode */
-#define USBMODE_SDIS (1<<3) /* Stream disable */
-#define USBMODE_BE (1<<2) /* BE/LE endianness select */
-#define USBMODE_CM_HC (3<<0) /* host controller mode */
-#define USBMODE_CM_IDLE (0<<0) /* idle state */
-
-/* Appendix C, Debug port ... intended for use with special "debug devices"
- * that can help if there's no serial console. (nonstandard enumeration.)
- */
-struct ehci_dbg_port {
- u32 control;
-#define DBGP_OWNER (1<<30)
-#define DBGP_ENABLED (1<<28)
-#define DBGP_DONE (1<<16)
-#define DBGP_INUSE (1<<10)
-#define DBGP_ERRCODE(x) (((x)>>7)&0x07)
-# define DBGP_ERR_BAD 1
-# define DBGP_ERR_SIGNAL 2
-#define DBGP_ERROR (1<<6)
-#define DBGP_GO (1<<5)
-#define DBGP_OUT (1<<4)
-#define DBGP_LEN(x) (((x)>>0)&0x0f)
- u32 pids;
-#define DBGP_PID_GET(x) (((x)>>16)&0xff)
-#define DBGP_PID_SET(data,tok) (((data)<<8)|(tok))
- u32 data03;
- u32 data47;
- u32 address;
-#define DBGP_EPADDR(dev,ep) (((dev)<<8)|(ep))
-} __attribute__ ((packed));
+#include <linux/usb/ehci_def.h>
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c
index 5da63f53500..516848dd9b4 100644
--- a/drivers/usb/host/sl811_cs.c
+++ b/drivers/usb/host/sl811_cs.c
@@ -112,7 +112,8 @@ static struct platform_device platform_dev = {
.num_resources = ARRAY_SIZE(resources),
};
-static int sl811_hc_init(struct device *parent, ioaddr_t base_addr, int irq)
+static int sl811_hc_init(struct device *parent, resource_size_t base_addr,
+ int irq)
{
if (platform_dev.dev.parent)
return -EBUSY;
@@ -155,97 +156,72 @@ static void sl811_cs_release(struct pcmcia_device * link)
platform_device_unregister(&platform_dev);
}
+static int sl811_cs_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ if (cfg->index == 0)
+ return -ENODEV;
+
+ /* Use power settings for Vcc and Vpp if present */
+ /* Note that the CIS values need to be rescaled */
+ if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
+ if (cfg->vcc.param[CISTPL_POWER_VNOM]/10000 != vcc)
+ return -ENODEV;
+ } else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) {
+ if (dflt->vcc.param[CISTPL_POWER_VNOM]/10000 != vcc)
+ return -ENODEV;
+ }
+
+ if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp =
+ cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
+ else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp =
+ dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
+
+ /* we need an interrupt */
+ if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
+ p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+
+ /* IO window settings */
+ p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ p_dev->io.BasePort1 = io->win[0].base;
+ p_dev->io.NumPorts1 = io->win[0].len;
+
+ return pcmcia_request_io(p_dev, &p_dev->io);
+ }
+ pcmcia_disable_device(p_dev);
+ return -ENODEV;
+}
+
+
static int sl811_cs_config(struct pcmcia_device *link)
{
struct device *parent = &handle_to_dev(link);
local_info_t *dev = link->priv;
- tuple_t tuple;
- cisparse_t parse;
int last_fn, last_ret;
- u_char buf[64];
- config_info_t conf;
- cistpl_cftable_entry_t dflt = { 0 };
DBG(0, "sl811_cs_config(0x%p)\n", link);
- /* Look up the current Vcc */
- CS_CHECK(GetConfigurationInfo,
- pcmcia_get_configuration_info(link, &conf));
-
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
-
- if (pcmcia_get_tuple_data(link, &tuple) != 0
- || pcmcia_parse_tuple(link, &tuple, &parse)
- != 0)
- goto next_entry;
-
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT) {
- dflt = *cfg;
- }
-
- if (cfg->index == 0)
- goto next_entry;
-
- link->conf.ConfigIndex = cfg->index;
-
- /* Use power settings for Vcc and Vpp if present */
- /* Note that the CIS values need to be rescaled */
- if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
- if (cfg->vcc.param[CISTPL_POWER_VNOM]/10000
- != conf.Vcc)
- goto next_entry;
- } else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) {
- if (dflt.vcc.param[CISTPL_POWER_VNOM]/10000
- != conf.Vcc)
- goto next_entry;
- }
-
- if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vpp =
- cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
- else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
- link->conf.Vpp =
- dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
-
- /* we need an interrupt */
- if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
- link->conf.Attributes |= CONF_ENABLE_IRQ;
-
- /* IO window settings */
- link->io.NumPorts1 = link->io.NumPorts2 = 0;
- if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
-
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- link->io.BasePort1 = io->win[0].base;
- link->io.NumPorts1 = io->win[0].len;
-
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
- }
- break;
-
-next_entry:
- pcmcia_disable_device(link);
- last_ret = pcmcia_get_next_tuple(link, &tuple);
- }
+ if (pcmcia_loop_config(link, sl811_cs_config_check, NULL))
+ goto failed;
/* require an IRQ and two registers */
if (!link->io.NumPorts1 || link->io.NumPorts1 < 2)
- goto cs_failed;
+ goto failed;
if (link->conf.Attributes & CONF_ENABLE_IRQ)
CS_CHECK(RequestIRQ,
pcmcia_request_irq(link, &link->irq));
else
- goto cs_failed;
+ goto failed;
CS_CHECK(RequestConfiguration,
pcmcia_request_configuration(link, &link->conf));
@@ -266,8 +242,9 @@ next_entry:
if (sl811_hc_init(parent, link->io.BasePort1, link->irq.AssignedIRQ)
< 0) {
cs_failed:
- printk("sl811_cs_config failed\n");
cs_error(link, last_fn, last_ret);
+failed:
+ printk(KERN_WARNING "sl811_cs_config failed\n");
sl811_cs_release(link);
return -ENODEV;
}