diff options
Diffstat (limited to 'drivers/usb/host')
-rw-r--r-- | drivers/usb/host/uhci-hcd.h | 91 |
1 files changed, 49 insertions, 42 deletions
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h index b04d99df0a0..e576db57a92 100644 --- a/drivers/usb/host/uhci-hcd.h +++ b/drivers/usb/host/uhci-hcd.h @@ -7,6 +7,7 @@ #define usb_packetid(pipe) (usb_pipein(pipe) ? USB_PID_IN : USB_PID_OUT) #define PIPE_DEVEP_MASK 0x0007ff00 + /* * Universal Host Controller Interface data structures and defines */ @@ -82,15 +83,10 @@ #define UHCI_MAX_SOF_NUMBER 2047 /* in an SOF packet */ #define CAN_SCHEDULE_FRAMES 1000 /* how far future frames can be scheduled */ -struct uhci_frame_list { - __le32 frame[UHCI_NUMFRAMES]; - - void *frame_cpu[UHCI_NUMFRAMES]; - dma_addr_t dma_handle; -}; - -struct urb_priv; +/* + * Queue Headers + */ /* * One role of a QH is to hold a queue of TDs for some endpoint. Each QH is @@ -116,13 +112,13 @@ struct uhci_qh { struct urb_priv *urbp; - struct list_head list; /* P: uhci->frame_list_lock */ - struct list_head remove_list; /* P: uhci->remove_list_lock */ + struct list_head list; + struct list_head remove_list; } __attribute__((aligned(16))); /* * We need a special accessor for the element pointer because it is - * subject to asynchronous updates by the controller + * subject to asynchronous updates by the controller. */ static __le32 inline qh_element(struct uhci_qh *qh) { __le32 element = qh->element; @@ -131,6 +127,11 @@ static __le32 inline qh_element(struct uhci_qh *qh) { return element; } + +/* + * Transfer Descriptors + */ + /* * for TD <status>: */ @@ -183,17 +184,10 @@ static __le32 inline qh_element(struct uhci_qh *qh) { * * That's silly, the hardware doesn't care. The hardware only cares that * the hardware words are 16-byte aligned, and we can have any amount of - * sw space after the TD entry as far as I can tell. - * - * But let's just go with the documentation, at least for 32-bit machines. - * On 64-bit machines we probably want to take advantage of the fact that - * hw doesn't really care about the size of the sw-only area. - * - * Alas, not anymore, we have more than 4 words for software, woops. - * Everything still works tho, surprise! -jerdfelt + * sw space after the TD entry. * * td->link points to either another TD (not necessarily for the same urb or - * even the same endpoint), or nothing (PTR_TERM), or a QH (for queued urbs) + * even the same endpoint), or nothing (PTR_TERM), or a QH (for queued urbs). */ struct uhci_td { /* Hardware fields */ @@ -205,16 +199,16 @@ struct uhci_td { /* Software fields */ dma_addr_t dma_handle; - struct list_head list; /* P: urb->lock */ - struct list_head remove_list; /* P: uhci->td_remove_list_lock */ + struct list_head list; + struct list_head remove_list; int frame; /* for iso: what frame? */ - struct list_head fl_list; /* P: uhci->frame_list_lock */ + struct list_head fl_list; } __attribute__((aligned(16))); /* * We need a special accessor for the control/status word because it is - * subject to asynchronous updates by the controller + * subject to asynchronous updates by the controller. */ static u32 inline td_status(struct uhci_td *td) { __le32 status = td->status; @@ -225,6 +219,10 @@ static u32 inline td_status(struct uhci_td *td) { /* + * Skeleton Queue Headers + */ + +/* * The UHCI driver places Interrupt, Control and Bulk into QH's both * to group together TD's for one transfer, and also to faciliate queuing * of URB's. To make it easy to insert entries into the schedule, we have @@ -254,15 +252,15 @@ static u32 inline td_status(struct uhci_td *td) { * * The terminating QH is used for 2 reasons: * - To place a terminating TD which is used to workaround a PIIX bug - * (see Intel errata for explanation) + * (see Intel errata for explanation), and * - To loop back to the full-speed control queue for full-speed bandwidth - * reclamation + * reclamation. * * Isochronous transfers are stored before the start of the skeleton * schedule and don't use QH's. While the UHCI spec doesn't forbid the - * use of QH's for Isochronous, it doesn't use them either. Since we don't - * need to use them either, we follow the spec diagrams in hope that it'll - * be more compatible with future UHCI implementations. + * use of QH's for Isochronous, it doesn't use them either. And the spec + * says that queues never advance on an error completion status, which + * makes them totally unsuitable for Isochronous transfers. */ #define UHCI_NUM_SKELQH 12 @@ -312,8 +310,13 @@ static inline int __interval_to_skel(int interval) return 0; /* int128 for 128-255 ms (Max.) */ } + +/* + * The UHCI controller and root hub + */ + /* - * States for the root hub. + * States for the root hub: * * To prevent "bouncing" in the presence of electrical noise, * when there are no devices attached we delay for 1 second in the @@ -324,7 +327,7 @@ static inline int __interval_to_skel(int interval) */ enum uhci_rh_state { /* In the following states the HC must be halted. - * These two must come first */ + * These two must come first. */ UHCI_RH_RESET, UHCI_RH_SUSPENDED, @@ -336,13 +339,13 @@ enum uhci_rh_state { UHCI_RH_SUSPENDING, /* In the following states it's an error if the HC is halted. - * These two must come last */ + * These two must come last. */ UHCI_RH_RUNNING, /* The normal state */ UHCI_RH_RUNNING_NODEVS, /* Running with no devices attached */ }; /* - * This describes the full uhci information. + * The full UHCI controller information: */ struct uhci_hcd { @@ -361,7 +364,7 @@ struct uhci_hcd { spinlock_t lock; dma_addr_t frame_dma_handle; /* Hardware frame list */ - __le32 *frame; /* P: uhci->lock */ + __le32 *frame; void **frame_cpu; /* CPU's frame list */ int fsbr; /* Full-speed bandwidth reclamation */ @@ -387,22 +390,22 @@ struct uhci_hcd { unsigned long ports_timeout; /* Time to stop signalling */ /* Main list of URB's currently controlled by this HC */ - struct list_head urb_list; /* P: uhci->lock */ + struct list_head urb_list; /* List of QH's that are done, but waiting to be unlinked (race) */ - struct list_head qh_remove_list; /* P: uhci->lock */ + struct list_head qh_remove_list; unsigned int qh_remove_age; /* Age in frames */ /* List of TD's that are done, but waiting to be freed (race) */ - struct list_head td_remove_list; /* P: uhci->lock */ + struct list_head td_remove_list; unsigned int td_remove_age; /* Age in frames */ /* List of asynchronously unlinked URB's */ - struct list_head urb_remove_list; /* P: uhci->lock */ + struct list_head urb_remove_list; unsigned int urb_remove_age; /* Age in frames */ /* List of URB's awaiting completion callback */ - struct list_head complete_list; /* P: uhci->lock */ + struct list_head complete_list; int rh_numports; /* Number of root-hub ports */ @@ -421,13 +424,17 @@ static inline struct usb_hcd *uhci_to_hcd(struct uhci_hcd *uhci) #define uhci_dev(u) (uhci_to_hcd(u)->self.controller) + +/* + * Private per-URB data + */ struct urb_priv { struct list_head urb_list; struct urb *urb; struct uhci_qh *qh; /* QH for this URB */ - struct list_head td_list; /* P: urb->lock */ + struct list_head td_list; unsigned fsbr : 1; /* URB turned on FSBR */ unsigned fsbr_timeout : 1; /* URB timed out on FSBR */ @@ -438,9 +445,10 @@ struct urb_priv { unsigned long fsbrtime; /* In jiffies */ - struct list_head queue_list; /* P: uhci->frame_list_lock */ + struct list_head queue_list; }; + /* * Locking in uhci.c * @@ -460,6 +468,5 @@ struct urb_priv { #define PCI_VENDOR_ID_GENESYS 0x17a0 #define PCI_DEVICE_ID_GL880S_UHCI 0x8083 -#define PCI_DEVICE_ID_GL880S_EHCI 0x8084 #endif |