aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/host
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host')
-rw-r--r--drivers/usb/host/ehci-hcd.c5
-rw-r--r--drivers/usb/host/ehci-hub.c20
-rw-r--r--drivers/usb/host/ehci-q.c11
-rw-r--r--drivers/usb/host/fhci-hcd.c3
-rw-r--r--drivers/usb/host/isp1362-hcd.c25
-rw-r--r--drivers/usb/host/isp1760-hcd.c6
-rw-r--r--drivers/usb/host/r8a66597-hcd.c17
-rw-r--r--drivers/usb/host/uhci-hcd.c15
-rw-r--r--drivers/usb/host/uhci-hub.c2
9 files changed, 82 insertions, 22 deletions
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 5859522d6ed..1ec3857f22e 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -787,9 +787,10 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
/* start 20 msec resume signaling from this port,
* and make khubd collect PORT_STAT_C_SUSPEND to
- * stop that signaling.
+ * stop that signaling. Use 5 ms extra for safety,
+ * like usb_port_resume() does.
*/
- ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
+ ehci->reset_done[i] = jiffies + msecs_to_jiffies(25);
ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
mod_timer(&hcd->rh_timer, ehci->reset_done[i]);
}
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 2c6571c05f3..c75d9270c75 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -120,9 +120,26 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
del_timer_sync(&ehci->watchdog);
del_timer_sync(&ehci->iaa_watchdog);
- port = HCS_N_PORTS (ehci->hcs_params);
spin_lock_irq (&ehci->lock);
+ /* Once the controller is stopped, port resumes that are already
+ * in progress won't complete. Hence if remote wakeup is enabled
+ * for the root hub and any ports are in the middle of a resume or
+ * remote wakeup, we must fail the suspend.
+ */
+ if (hcd->self.root_hub->do_remote_wakeup) {
+ port = HCS_N_PORTS(ehci->hcs_params);
+ while (port--) {
+ if (ehci->reset_done[port] != 0) {
+ spin_unlock_irq(&ehci->lock);
+ ehci_dbg(ehci, "suspend failed because "
+ "port %d is resuming\n",
+ port + 1);
+ return -EBUSY;
+ }
+ }
+ }
+
/* stop schedules, clean any completed work */
if (HC_IS_RUNNING(hcd->state)) {
ehci_quiesce (ehci);
@@ -138,6 +155,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
*/
ehci->bus_suspended = 0;
ehci->owned_ports = 0;
+ port = HCS_N_PORTS(ehci->hcs_params);
while (port--) {
u32 __iomem *reg = &ehci->regs->port_status [port];
u32 t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index a427d3b0063..89521775c56 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -849,9 +849,10 @@ qh_make (
* But interval 1 scheduling is simpler, and
* includes high bandwidth.
*/
- dbg ("intr period %d uframes, NYET!",
- urb->interval);
- goto done;
+ urb->interval = 1;
+ } else if (qh->period > ehci->periodic_size) {
+ qh->period = ehci->periodic_size;
+ urb->interval = qh->period << 3;
}
} else {
int think_time;
@@ -874,6 +875,10 @@ qh_make (
usb_calc_bus_time (urb->dev->speed,
is_input, 0, max_packet (maxp)));
qh->period = urb->interval;
+ if (qh->period > ehci->periodic_size) {
+ qh->period = ehci->periodic_size;
+ urb->interval = qh->period;
+ }
}
}
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index 0951818ef93..78e7c3cfcb7 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -242,9 +242,10 @@ err:
static void fhci_usb_free(void *lld)
{
struct fhci_usb *usb = lld;
- struct fhci_hcd *fhci = usb->fhci;
+ struct fhci_hcd *fhci;
if (usb) {
+ fhci = usb->fhci;
fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF);
fhci_ep0_free(usb);
kfree(usb->actual_frame);
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 73352f3739b..42971657fde 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -2270,10 +2270,10 @@ static int isp1362_mem_config(struct usb_hcd *hcd)
dev_info(hcd->self.controller, "ISP1362 Memory usage:\n");
dev_info(hcd->self.controller, " ISTL: 2 * %4d: %4d @ $%04x:$%04x\n",
istl_size / 2, istl_size, 0, istl_size / 2);
- dev_info(hcd->self.controller, " INTL: %4d * (%3lu+8): %4d @ $%04x\n",
+ dev_info(hcd->self.controller, " INTL: %4d * (%3zu+8): %4d @ $%04x\n",
ISP1362_INTL_BUFFERS, intl_blksize - PTD_HEADER_SIZE,
intl_size, istl_size);
- dev_info(hcd->self.controller, " ATL : %4d * (%3lu+8): %4d @ $%04x\n",
+ dev_info(hcd->self.controller, " ATL : %4d * (%3zu+8): %4d @ $%04x\n",
atl_buffers, atl_blksize - PTD_HEADER_SIZE,
atl_size, istl_size + intl_size);
dev_info(hcd->self.controller, " USED/FREE: %4d %4d\n", total,
@@ -2697,6 +2697,8 @@ static int __init isp1362_probe(struct platform_device *pdev)
void __iomem *data_reg;
int irq;
int retval = 0;
+ struct resource *irq_res;
+ unsigned int irq_flags = 0;
/* basic sanity checks first. board-specific init logic should
* have initialized this the three resources and probably board
@@ -2710,11 +2712,12 @@ static int __init isp1362_probe(struct platform_device *pdev)
data = platform_get_resource(pdev, IORESOURCE_MEM, 0);
addr = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- irq = platform_get_irq(pdev, 0);
- if (!addr || !data || irq < 0) {
+ irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!addr || !data || !irq_res) {
retval = -ENODEV;
goto err1;
}
+ irq = irq_res->start;
#ifdef CONFIG_USB_HCD_DMA
if (pdev->dev.dma_mask) {
@@ -2781,12 +2784,16 @@ static int __init isp1362_probe(struct platform_device *pdev)
}
#endif
-#ifdef CONFIG_ARM
- if (isp1362_hcd->board)
- set_irq_type(irq, isp1362_hcd->board->int_act_high ? IRQT_RISING : IRQT_FALLING);
-#endif
+ if (irq_res->flags & IORESOURCE_IRQ_HIGHEDGE)
+ irq_flags |= IRQF_TRIGGER_RISING;
+ if (irq_res->flags & IORESOURCE_IRQ_LOWEDGE)
+ irq_flags |= IRQF_TRIGGER_FALLING;
+ if (irq_res->flags & IORESOURCE_IRQ_HIGHLEVEL)
+ irq_flags |= IRQF_TRIGGER_HIGH;
+ if (irq_res->flags & IORESOURCE_IRQ_LOWLEVEL)
+ irq_flags |= IRQF_TRIGGER_LOW;
- retval = usb_add_hcd(hcd, irq, IRQF_TRIGGER_LOW | IRQF_DISABLED | IRQF_SHARED);
+ retval = usb_add_hcd(hcd, irq, irq_flags | IRQF_DISABLED | IRQF_SHARED);
if (retval != 0)
goto err6;
pr_info("%s, irq %d\n", hcd->product_desc, irq);
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index 9600a58299d..27b8f7cb447 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -1039,12 +1039,12 @@ static void do_atl_int(struct usb_hcd *usb_hcd)
if (!nakcount && (dw3 & DW3_QTD_ACTIVE)) {
u32 buffstatus;
- /* XXX
+ /*
* NAKs are handled in HW by the chip. Usually if the
* device is not able to send data fast enough.
- * This did not trigger for a long time now.
+ * This happens mostly on slower hardware.
*/
- printk(KERN_ERR "Reloading ptd %p/%p... qh %p readed: "
+ printk(KERN_NOTICE "Reloading ptd %p/%p... qh %p read: "
"%d of %zu done: %08x cur: %08x\n", qtd,
urb, qh, PTD_XFERRED_LENGTH(dw3),
qtd->length, done_map,
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index b7a661c02bc..0ceec123ddf 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -216,8 +216,17 @@ static void disable_controller(struct r8a66597 *r8a66597)
{
int port;
+ /* disable interrupts */
r8a66597_write(r8a66597, 0, INTENB0);
- r8a66597_write(r8a66597, 0, INTSTS0);
+ r8a66597_write(r8a66597, 0, INTENB1);
+ r8a66597_write(r8a66597, 0, BRDYENB);
+ r8a66597_write(r8a66597, 0, BEMPENB);
+ r8a66597_write(r8a66597, 0, NRDYENB);
+
+ /* clear status */
+ r8a66597_write(r8a66597, 0, BRDYSTS);
+ r8a66597_write(r8a66597, 0, NRDYSTS);
+ r8a66597_write(r8a66597, 0, BEMPSTS);
for (port = 0; port < r8a66597->max_root_hub; port++)
r8a66597_disable_port(r8a66597, port);
@@ -2466,6 +2475,12 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
r8a66597->rh_timer.data = (unsigned long)r8a66597;
r8a66597->reg = (unsigned long)reg;
+ /* make sure no interrupts are pending */
+ ret = r8a66597_clock_enable(r8a66597);
+ if (ret < 0)
+ goto clean_up3;
+ disable_controller(r8a66597);
+
for (i = 0; i < R8A66597_MAX_NUM_PIPE; i++) {
INIT_LIST_HEAD(&r8a66597->pipe_queue[i]);
init_timer(&r8a66597->td_timer[i]);
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 5cd0e48f67f..99cd00fd351 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -749,7 +749,20 @@ static int uhci_rh_suspend(struct usb_hcd *hcd)
spin_lock_irq(&uhci->lock);
if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
rc = -ESHUTDOWN;
- else if (!uhci->dead)
+ else if (uhci->dead)
+ ; /* Dead controllers tell no tales */
+
+ /* Once the controller is stopped, port resumes that are already
+ * in progress won't complete. Hence if remote wakeup is enabled
+ * for the root hub and any ports are in the middle of a resume or
+ * remote wakeup, we must fail the suspend.
+ */
+ else if (hcd->self.root_hub->do_remote_wakeup &&
+ uhci->resuming_ports) {
+ dev_dbg(uhci_dev(uhci), "suspend failed because a port "
+ "is resuming\n");
+ rc = -EBUSY;
+ } else
suspend_rh(uhci, UHCI_RH_SUSPENDED);
spin_unlock_irq(&uhci->lock);
return rc;
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index 885b585360b..8270055848c 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -167,7 +167,7 @@ static void uhci_check_ports(struct uhci_hcd *uhci)
/* Port received a wakeup request */
set_bit(port, &uhci->resuming_ports);
uhci->ports_timeout = jiffies +
- msecs_to_jiffies(20);
+ msecs_to_jiffies(25);
/* Make sure we see the port again
* after the resuming period is over. */
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 03:33:21 +0000