diff options
Diffstat (limited to 'drivers/usb/input')
-rw-r--r-- | drivers/usb/input/Kconfig | 46 | ||||
-rw-r--r-- | drivers/usb/input/Makefile | 7 | ||||
-rw-r--r-- | drivers/usb/input/gtco.c | 1104 | ||||
-rw-r--r-- | drivers/usb/input/hid-core.c | 1497 | ||||
-rw-r--r-- | drivers/usb/input/hid-debug.h | 757 | ||||
-rw-r--r-- | drivers/usb/input/hid-ff.c | 12 | ||||
-rw-r--r-- | drivers/usb/input/hid-input.c | 872 | ||||
-rw-r--r-- | drivers/usb/input/hid-lgff.c | 11 | ||||
-rw-r--r-- | drivers/usb/input/hid-pidff.c | 58 | ||||
-rw-r--r-- | drivers/usb/input/hid-plff.c | 129 | ||||
-rw-r--r-- | drivers/usb/input/hid-tmff.c | 5 | ||||
-rw-r--r-- | drivers/usb/input/hid-zpff.c | 7 | ||||
-rw-r--r-- | drivers/usb/input/hid.h | 540 | ||||
-rw-r--r-- | drivers/usb/input/hiddev.c | 37 | ||||
-rw-r--r-- | drivers/usb/input/usbhid.h | 87 | ||||
-rw-r--r-- | drivers/usb/input/usbtouchscreen.c | 98 | ||||
-rw-r--r-- | drivers/usb/input/wacom_sys.c | 4 | ||||
-rw-r--r-- | drivers/usb/input/wacom_wac.c | 26 |
18 files changed, 1834 insertions, 3463 deletions
diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig index 661af7aa623..2e71d3cca19 100644 --- a/drivers/usb/input/Kconfig +++ b/drivers/usb/input/Kconfig @@ -6,14 +6,14 @@ comment "USB Input Devices" config USB_HID tristate "USB Human Interface Device (full HID) support" - depends on USB + default y + depends on USB && INPUT + select HID ---help--- - Say Y here if you want full HID support to connect keyboards, + Say Y here if you want full HID support to connect USB keyboards, mice, joysticks, graphic tablets, or any other HID based devices - to your computer via USB. You also need to select HID Input layer - support (below) if you want to use keyboards, mice, joysticks and - the like ... as well as Uninterruptible Power Supply (UPS) and - monitor control devices. + to your computer via USB, as well as Uninterruptible Power Supply + (UPS) and monitor control devices. You can't use this driver and the HIDBP (Boot Protocol) keyboard and mouse drivers at the same time. More information is available: @@ -27,20 +27,10 @@ config USB_HID comment "Input core support is needed for USB HID input layer or HIDBP support" depends on USB_HID && INPUT=n -config USB_HIDINPUT - bool "HID input layer support" - default y - depends on INPUT && USB_HID - help - Say Y here if you want to use a USB keyboard, mouse or joystick, - or any other HID input device. - - If unsure, say Y. - config USB_HIDINPUT_POWERBOOK bool "Enable support for iBook/PowerBook special keys" default n - depends on USB_HIDINPUT + depends on USB_HID help Say Y here if you want support for the special keys (Fn, Numlock) on Apple iBooks and PowerBooks. @@ -49,7 +39,7 @@ config USB_HIDINPUT_POWERBOOK config HID_FF bool "Force feedback support (EXPERIMENTAL)" - depends on USB_HIDINPUT && EXPERIMENTAL + depends on USB_HID && EXPERIMENTAL help Say Y here is you want force feedback support for a few HID devices. See below for a list of supported devices. @@ -79,6 +69,14 @@ config LOGITECH_FF Note: if you say N here, this device will still be supported, but without force feedback. +config PANTHERLORD_FF + bool "PantherLord USB/PS2 2in1 Adapter support" + depends on HID_FF + select INPUT_FF_MEMLESS if USB_HID + help + Say Y here if you have a PantherLord USB/PS2 2in1 Adapter and want + to enable force feedback support for it. + config THRUSTMASTER_FF bool "ThrustMaster FireStorm Dual Power 2 support (EXPERIMENTAL)" depends on HID_FF && EXPERIMENTAL @@ -354,3 +352,15 @@ config USB_APPLETOUCH To compile this driver as a module, choose M here: the module will be called appletouch. + +config USB_GTCO + tristate "GTCO CalComp/InterWrite USB Support" + depends on USB && INPUT + ---help--- + Say Y here if you want to use the USB version of the GTCO + CalComp/InterWrite Tablet. Make sure to say Y to "Mouse support" + (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" + (CONFIG_INPUT_EVDEV) as well. + + To compile this driver as a module, choose M here: the + module will be called gtco. diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile index d946d5213b3..a9d206c945e 100644 --- a/drivers/usb/input/Makefile +++ b/drivers/usb/input/Makefile @@ -11,15 +11,15 @@ usbhid-objs := hid-core.o ifeq ($(CONFIG_USB_HIDDEV),y) usbhid-objs += hiddev.o endif -ifeq ($(CONFIG_USB_HIDINPUT),y) - usbhid-objs += hid-input.o -endif ifeq ($(CONFIG_HID_PID),y) usbhid-objs += hid-pidff.o endif ifeq ($(CONFIG_LOGITECH_FF),y) usbhid-objs += hid-lgff.o endif +ifeq ($(CONFIG_PANTHERLORD_FF),y) + usbhid-objs += hid-plff.o +endif ifeq ($(CONFIG_THRUSTMASTER_FF),y) usbhid-objs += hid-tmff.o endif @@ -48,6 +48,7 @@ obj-$(CONFIG_USB_ACECAD) += acecad.o obj-$(CONFIG_USB_YEALINK) += yealink.o obj-$(CONFIG_USB_XPAD) += xpad.o obj-$(CONFIG_USB_APPLETOUCH) += appletouch.o +obj-$(CONFIG_USB_GTCO) += gtco.o ifeq ($(CONFIG_USB_DEBUG),y) EXTRA_CFLAGS += -DDEBUG diff --git a/drivers/usb/input/gtco.c b/drivers/usb/input/gtco.c new file mode 100644 index 00000000000..203cdc1bbba --- /dev/null +++ b/drivers/usb/input/gtco.c @@ -0,0 +1,1104 @@ +/* -*- linux-c -*- + +GTCO digitizer USB driver + +Use the err(), dbg() and info() macros from usb.h for system logging + +TO CHECK: Is pressure done right on report 5? + +Copyright (C) 2006 GTCO CalComp + +This program is free software; you can redistribute it and/or +modify it under the terms of the GNU General Public License +as published by the Free Software Foundation; version 2 +of the License. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + +Permission to use, copy, modify, distribute, and sell this software and its +documentation for any purpose is hereby granted without fee, provided that +the above copyright notice appear in all copies and that both that +copyright notice and this permission notice appear in supporting +documentation, and that the name of GTCO-CalComp not be used in advertising +or publicity pertaining to distribution of the software without specific, +written prior permission. GTCO-CalComp makes no representations about the +suitability of this software for any purpose. It is provided "as is" +without express or implied warranty. + +GTCO-CALCOMP DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, +INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO +EVENT SHALL GTCO-CALCOMP BE LIABLE FOR ANY SPECIAL, INDIRECT OR +CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, +DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER +TORTIOUS ACTIONS, ARISING OUT OF OR IN CONNECTION WITH THE USE OR +PERFORMANCE OF THIS SOFTWARE. + +GTCO CalComp, Inc. +7125 Riverwood Drive +Columbia, MD 21046 + +Jeremy Roberson jroberson@gtcocalcomp.com +Scott Hill shill@gtcocalcomp.com +*/ + + + +/*#define DEBUG*/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/usb.h> +#include <asm/uaccess.h> +#include <asm/unaligned.h> +#include <asm/byteorder.h> + + +#include <linux/version.h> +#include <linux/usb/input.h> + +/* Version with a Major number of 2 is for kernel inclusion only. */ +#define GTCO_VERSION "2.00.0006" + + +/* MACROS */ + +#define VENDOR_ID_GTCO 0x078C +#define PID_400 0x400 +#define PID_401 0x401 +#define PID_1000 0x1000 +#define PID_1001 0x1001 +#define PID_1002 0x1002 + +/* Max size of a single report */ +#define REPORT_MAX_SIZE 10 + + +/* Bitmask whether pen is in range */ +#define MASK_INRANGE 0x20 +#define MASK_BUTTON 0x01F + +#define PATHLENGTH 64 + +/* DATA STRUCTURES */ + +/* Device table */ +static struct usb_device_id gtco_usbid_table [] = { + { USB_DEVICE(VENDOR_ID_GTCO, PID_400) }, + { USB_DEVICE(VENDOR_ID_GTCO, PID_401) }, + { USB_DEVICE(VENDOR_ID_GTCO, PID_1000) }, + { USB_DEVICE(VENDOR_ID_GTCO, PID_1001) }, + { USB_DEVICE(VENDOR_ID_GTCO, PID_1002) }, + { } +}; +MODULE_DEVICE_TABLE (usb, gtco_usbid_table); + + +/* Structure to hold all of our device specific stuff */ +struct gtco { + + struct input_dev *inputdevice; /* input device struct pointer */ + struct usb_device *usbdev; /* the usb device for this device */ + struct urb *urbinfo; /* urb for incoming reports */ + dma_addr_t buf_dma; /* dma addr of the data buffer*/ + unsigned char * buffer; /* databuffer for reports */ + + char usbpath[PATHLENGTH]; + int openCount; + + /* Information pulled from Report Descriptor */ + u32 usage; + u32 min_X; + u32 max_X; + u32 min_Y; + u32 max_Y; + s8 mintilt_X; + s8 maxtilt_X; + s8 mintilt_Y; + s8 maxtilt_Y; + u32 maxpressure; + u32 minpressure; +}; + + + +/* Code for parsing the HID REPORT DESCRIPTOR */ + +/* From HID1.11 spec */ +struct hid_descriptor +{ + struct usb_descriptor_header header; + __le16 bcdHID; + u8 bCountryCode; + u8 bNumDescriptors; + u8 bDescriptorType; + __le16 wDescriptorLength; +} __attribute__ ((packed)); + + +#define HID_DESCRIPTOR_SIZE 9 +#define HID_DEVICE_TYPE 33 +#define REPORT_DEVICE_TYPE 34 + + +#define PREF_TAG(x) ((x)>>4) +#define PREF_TYPE(x) ((x>>2)&0x03) +#define PREF_SIZE(x) ((x)&0x03) + +#define TYPE_MAIN 0 +#define TYPE_GLOBAL 1 +#define TYPE_LOCAL 2 +#define TYPE_RESERVED 3 + +#define TAG_MAIN_INPUT 0x8 +#define TAG_MAIN_OUTPUT 0x9 +#define TAG_MAIN_FEATURE 0xB +#define TAG_MAIN_COL_START 0xA +#define TAG_MAIN_COL_END 0xC + +#define TAG_GLOB_USAGE 0 +#define TAG_GLOB_LOG_MIN 1 +#define TAG_GLOB_LOG_MAX 2 +#define TAG_GLOB_PHYS_MIN 3 +#define TAG_GLOB_PHYS_MAX 4 +#define TAG_GLOB_UNIT_EXP 5 +#define TAG_GLOB_UNIT 6 +#define TAG_GLOB_REPORT_SZ 7 +#define TAG_GLOB_REPORT_ID 8 +#define TAG_GLOB_REPORT_CNT 9 +#define TAG_GLOB_PUSH 10 +#define TAG_GLOB_POP 11 + +#define TAG_GLOB_MAX 12 + +#define DIGITIZER_USAGE_TIP_PRESSURE 0x30 +#define DIGITIZER_USAGE_TILT_X 0x3D +#define DIGITIZER_USAGE_TILT_Y 0x3E + + +/* + * + * This is an abbreviated parser for the HID Report Descriptor. We + * know what devices we are talking to, so this is by no means meant + * to be generic. We can make some safe assumptions: + * + * - We know there are no LONG tags, all short + * - We know that we have no MAIN Feature and MAIN Output items + * - We know what the IRQ reports are supposed to look like. + * + * The main purpose of this is to use the HID report desc to figure + * out the mins and maxs of the fields in the IRQ reports. The IRQ + * reports for 400/401 change slightly if the max X is bigger than 64K. + * + */ +static void parse_hid_report_descriptor(struct gtco *device, char * report, + int length) +{ + int x,i=0; + + /* Tag primitive vars */ + __u8 prefix; + __u8 size; + __u8 tag; + __u8 type; + __u8 data = 0; + __u16 data16 = 0; + __u32 data32 = 0; + + + /* For parsing logic */ + int inputnum = 0; + __u32 usage = 0; + + /* Global Values, indexed by TAG */ + __u32 globalval[TAG_GLOB_MAX]; + __u32 oldval[TAG_GLOB_MAX]; + + /* Debug stuff */ + char maintype='x'; + char globtype[12]; + int indent=0; + char indentstr[10]=""; + + + + dbg("======>>>>>>PARSE<<<<<<======"); + + /* Walk this report and pull out the info we need */ + while (i<length){ + prefix=report[i]; + + /* Skip over prefix */ + i++; + + /* Determine data size and save the data in the proper variable */ + size = PREF_SIZE(prefix); + switch(size){ + case 1: + data = report[i]; + break; + case 2: + data16 = le16_to_cpu(get_unaligned((__le16*)(&(report[i])))); + break; + case 3: + size = 4; + data32 = le32_to_cpu(get_unaligned((__le32*)(&(report[i])))); + } + + /* Skip size of data */ + i+=size; + + /* What we do depends on the tag type */ + tag = PREF_TAG(prefix); + type = PREF_TYPE(prefix); + switch(type){ + case TYPE_MAIN: + strcpy(globtype,""); + switch(tag){ + + case TAG_MAIN_INPUT: + /* + * The INPUT MAIN tag signifies this is + * information from a report. We need to + * figure out what it is and store the + * min/max values + */ + + maintype='I'; + if (data==2){ + strcpy(globtype,"Variable"); + } + if (data==3){ + strcpy(globtype,"Var|Const"); + } + + dbg("::::: Saving Report: %d input #%d Max: 0x%X(%d) Min:0x%X(%d) of %d bits", + globalval[TAG_GLOB_REPORT_ID],inputnum, + globalval[TAG_GLOB_LOG_MAX],globalval[TAG_GLOB_LOG_MAX], + globalval[TAG_GLOB_LOG_MIN],globalval[TAG_GLOB_LOG_MIN], + (globalval[TAG_GLOB_REPORT_SZ] * globalval[TAG_GLOB_REPORT_CNT])); + + + /* + We can assume that the first two input items + are always the X and Y coordinates. After + that, we look for everything else by + local usage value + */ + switch (inputnum){ + case 0: /* X coord */ + dbg("GER: X Usage: 0x%x",usage); + if (device->max_X == 0){ + device->max_X = globalval[TAG_GLOB_LOG_MAX]; + device->min_X = globalval[TAG_GLOB_LOG_MIN]; + } + + break; + case 1: /* Y coord */ + dbg("GER: Y Usage: 0x%x",usage); + if (device->max_Y == 0){ + device->max_Y = globalval[TAG_GLOB_LOG_MAX]; + device->min_Y = globalval[TAG_GLOB_LOG_MIN]; + } + break; + default: + /* Tilt X */ + if (usage == DIGITIZER_USAGE_TILT_X){ + if (device->maxtilt_X == 0){ + device->maxtilt_X = globalval[TAG_GLOB_LOG_MAX]; + device->mintilt_X = globalval[TAG_GLOB_LOG_MIN]; + } + } + + /* Tilt Y */ + if (usage == DIGITIZER_USAGE_TILT_Y){ + if (device->maxtilt_Y == 0){ + device->maxtilt_Y = globalval[TAG_GLOB_LOG_MAX]; + device->mintilt_Y = globalval[TAG_GLOB_LOG_MIN]; + } + } + + + /* Pressure */ + if (usage == DIGITIZER_USAGE_TIP_PRESSURE){ + if (device->maxpressure == 0){ + device->maxpressure = globalval[TAG_GLOB_LOG_MAX]; + device->minpressure = globalval[TAG_GLOB_LOG_MIN]; + } + } + + break; + } + + inputnum++; + + + break; + case TAG_MAIN_OUTPUT: + maintype='O'; + break; + case TAG_MAIN_FEATURE: + maintype='F'; + break; + case TAG_MAIN_COL_START: + maintype='S'; + + if (data==0){ + dbg("======>>>>>> Physical"); + strcpy(globtype,"Physical"); + }else{ + dbg("======>>>>>>"); + } + + /* Indent the debug output */ + indent++; + for (x=0;x<indent;x++){ + indentstr[x]='-'; + } + indentstr[x]=0; + + /* Save global tags */ + for (x=0;x<TAG_GLOB_MAX;x++){ + oldval[x] = globalval[x]; + } + + break; + case TAG_MAIN_COL_END: + dbg("<<<<<<======"); + maintype='E'; + indent--; + for (x=0;x<indent;x++){ + indentstr[x]='-'; + } + indentstr[x]=0; + + /* Copy global tags back */ + for (x=0;x<TAG_GLOB_MAX;x++){ + globalval[x] = oldval[x]; + } + + break; + } + + switch (size){ + case 1: + dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x", + indentstr,tag,maintype,size,globtype,data); + break; + case 2: + dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x", + indentstr,tag,maintype,size,globtype, data16); + break; + case 4: + dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x", + indentstr,tag,maintype,size,globtype,data32); + break; + } + break; + case TYPE_GLOBAL: + switch(tag){ + case TAG_GLOB_USAGE: + /* + * First time we hit the global usage tag, + * it should tell us the type of device + */ + if (device->usage == 0){ + device->usage = data; + } + strcpy(globtype,"USAGE"); + break; + case TAG_GLOB_LOG_MIN : + strcpy(globtype,"LOG_MIN"); + break; + case TAG_GLOB_LOG_MAX : + strcpy(globtype,"LOG_MAX"); + break; + case TAG_GLOB_PHYS_MIN : + strcpy(globtype,"PHYS_MIN"); + break; + case TAG_GLOB_PHYS_MAX : + strcpy(globtype,"PHYS_MAX"); + break; + case TAG_GLOB_UNIT_EXP : + strcpy(globtype,"EXP"); + break; + case TAG_GLOB_UNIT : + strcpy(globtype,"UNIT"); + break; + case TAG_GLOB_REPORT_SZ : + strcpy(globtype,"REPORT_SZ"); + break; + case TAG_GLOB_REPORT_ID : + strcpy(globtype,"REPORT_ID"); + /* New report, restart numbering */ + inputnum=0; + break; + case TAG_GLOB_REPORT_CNT: + strcpy(globtype,"REPORT_CNT"); + break; + case TAG_GLOB_PUSH : + strcpy(globtype,"PUSH"); + break; + case TAG_GLOB_POP: + strcpy(globtype,"POP"); + break; + } + + + /* Check to make sure we have a good tag number + so we don't overflow array */ + if (tag < TAG_GLOB_MAX){ + switch (size){ + case 1: + dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x",indentstr,globtype,tag,size,data); + globalval[tag]=data; + break; + case 2: + dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x",indentstr,globtype,tag,size,data16); + globalval[tag]=data16; + break; + case 4: + dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x",indentstr,globtype,tag,size,data32); + globalval[tag]=data32; + break; + } + }else{ + dbg("%sGLOBALTAG: ILLEGAL TAG:%d SIZE: %d ", + indentstr,tag,size); + } + + + break; + + case TYPE_LOCAL: + switch(tag){ + case TAG_GLOB_USAGE: + strcpy(globtype,"USAGE"); + /* Always 1 byte */ + usage = data; + break; + case TAG_GLOB_LOG_MIN : + strcpy(globtype,"MIN"); + break; + case TAG_GLOB_LOG_MAX : + strcpy(globtype,"MAX"); + break; + default: + strcpy(globtype,"UNKNOWN"); + } + + switch (size){ + case 1: + dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x", + indentstr,tag,globtype,size,data); + break; + case 2: + dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x", + indentstr,tag,globtype,size,data16); + break; + case 4: + dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x", + indentstr,tag,globtype,size,data32); + break; + } + + break; + } + + } + +} + + + +/* INPUT DRIVER Routines */ + + +/* + * Called when opening the input device. This will submit the URB to + * the usb system so we start getting reports + */ +static int gtco_input_open(struct input_dev *inputdev) +{ + struct gtco *device; + device = inputdev->private; + + device->urbinfo->dev = device->usbdev; + if (usb_submit_urb(device->urbinfo, GFP_KERNEL)) { + return -EIO; + } + return 0; +} + +/** + Called when closing the input device. This will unlink the URB +*/ +static void gtco_input_close(struct input_dev *inputdev) +{ + struct gtco *device = inputdev->private; + + usb_kill_urb(device->urbinfo); + +} + + +/* + * Setup input device capabilities. Tell the input system what this + * device is capable of generating. + * + * This information is based on what is read from the HID report and + * placed in the struct gtco structure + * + */ +static void gtco_setup_caps(struct input_dev *inputdev) +{ + struct gtco *device = inputdev->private; + + + /* Which events */ + inputdev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_MSC); + + + /* Misc event menu block */ + inputdev->mscbit[0] = BIT(MSC_SCAN)|BIT(MSC_SERIAL)|BIT(MSC_RAW) ; + + + /* Absolute values based on HID report info */ + input_set_abs_params(inputdev, ABS_X, device->min_X, device->max_X, + 0, 0); + input_set_abs_params(inputdev, ABS_Y, device->min_Y, device->max_Y, + 0, 0); + + /* Proximity */ + input_set_abs_params(inputdev, ABS_DISTANCE, 0, 1, 0, 0); + + /* Tilt & pressure */ + input_set_abs_params(inputdev, ABS_TILT_X, device->mintilt_X, + device->maxtilt_X, 0, 0); + input_set_abs_params(inputdev, ABS_TILT_Y, device->mintilt_Y, + device->maxtilt_Y, 0, 0); + input_set_abs_params(inputdev, ABS_PRESSURE, device->minpressure, + device->maxpressure, 0, 0); + + + /* Transducer */ + input_set_abs_params(inputdev, ABS_MISC, 0,0xFF, 0, 0); + +} + + + +/* USB Routines */ + + +/* + * URB callback routine. Called when we get IRQ reports from the + * digitizer. + * + * This bridges the USB and input device worlds. It generates events + * on the input device based on the USB reports. + */ +static void gtco_urb_callback(struct urb *urbinfo) +{ + + + struct gtco *device = urbinfo->context; + struct input_dev *inputdev; + int rc; + u32 val = 0; + s8 valsigned = 0; + char le_buffer[2]; + + inputdev = device->inputdevice; + + + /* Was callback OK? */ + if ((urbinfo->status == -ECONNRESET ) || + (urbinfo->status == -ENOENT ) || + (urbinfo->status == -ESHUTDOWN )){ + + /* Shutdown is occurring. Return and don't queue up any more */ + return; + } + + if (urbinfo->status != 0 ) { + /* Some unknown error. Hopefully temporary. Just go and */ + /* requeue an URB */ + goto resubmit; + } + + /* + * Good URB, now process + */ + + /* PID dependent when we interpret the report */ + if ((inputdev->id.product == PID_1000 )|| + (inputdev->id.product == PID_1001 )|| + (inputdev->id.product == PID_1002 )) + { + + /* + * Switch on the report ID + * Conveniently, the reports have more information, the higher + * the report number. We can just fall through the case + * statements if we start with the highest number report + */ + switch(device->buffer[0]){ + case 5: + /* Pressure is 9 bits */ + val = ((u16)(device->buffer[8]) << 1); + val |= (u16)(device->buffer[7] >> 7); + input_report_abs(inputdev, ABS_PRESSURE, + device->buffer[8]); + + /* Mask out the Y tilt value used for pressure */ + device->buffer[7] = (u8)((device->buffer[7]) & 0x7F); + + + /* Fall thru */ + case 4: + /* Tilt */ + + /* Sign extend these 7 bit numbers. */ + if (device->buffer[6] & 0x40) + device->buffer[6] |= 0x80; + + if (device->buffer[7] & 0x40) + device->buffer[7] |= 0x80; + + + valsigned = (device->buffer[6]); + input_report_abs(inputdev, ABS_TILT_X, (s32)valsigned); + + valsigned = (device->buffer[7]); + input_report_abs(inputdev, ABS_TILT_Y, (s32)valsigned); + + /* Fall thru */ + + case 2: + case 3: + /* Convert buttons, only 5 bits possible */ + val = (device->buffer[5])&MASK_BUTTON; + + /* We don't apply any meaning to the bitmask, + just report */ + input_event(inputdev, EV_MSC, MSC_SERIAL, val); + + /* Fall thru */ + case 1: + + /* All reports have X and Y coords in the same place */ + val = le16_to_cpu(get_unaligned((__le16 *) &(device->buffer[1]))); + input_report_abs(inputdev, ABS_X, val); + + val = le16_to_cpu(get_unaligned((__le16 *) &(device->buffer[3]))); + input_report_abs(inputdev, ABS_Y, val); + + + /* Ditto for proximity bit */ + if (device->buffer[5]& MASK_INRANGE){ + val = 1; + }else{ + val=0; + } + input_report_abs(inputdev, ABS_DISTANCE, val); + + + /* Report 1 is an exception to how we handle buttons */ + /* Buttons are an index, not a bitmask */ + if (device->buffer[0] == 1){ + + /* Convert buttons, 5 bit index */ + /* Report value of index set as one, + the rest as 0 */ + val = device->buffer[5]& MASK_BUTTON; + dbg("======>>>>>>REPORT 1: val 0x%X(%d)", + val,val); + + /* + * We don't apply any meaning to the button + * index, just report it + */ + input_event(inputdev, EV_MSC, MSC_SERIAL, val); + + + } + + break; + case 7: + /* Menu blocks */ + input_event(inputdev, EV_MSC, MSC_SCAN, + device->buffer[1]); + + + break; + + } + + + } + /* Other pid class */ + if ((inputdev->id.product == PID_400 )|| + (inputdev->id.product == PID_401 )) + { + + /* Report 2 */ + if (device->buffer[0] == 2){ + /* Menu blocks */ + input_event(inputdev, EV_MSC, MSC_SCAN, + device->buffer[1]); + } + + /* Report 1 */ + if (device->buffer[0] == 1){ + char buttonbyte; + + + /* IF X max > 64K, we still a bit from the y report */ + if (device->max_X > 0x10000){ + + val = (u16)(((u16)(device->buffer[2]<<8))|((u8)(device->buffer[1]))); + val |= (u32)(((u8)device->buffer[3]&0x1)<< 16); + + input_report_abs(inputdev, ABS_X, val); + + le_buffer[0] = (u8)((u8)(device->buffer[3])>>1); + le_buffer[0] |= (u8)((device->buffer[3]&0x1)<<7); + + le_buffer[1] = (u8)(device->buffer[4]>>1); + le_buffer[1] |= (u8)((device->buffer[5]&0x1)<<7); + + val = le16_to_cpu(get_unaligned((__le16 *)(le_buffer))); + + input_report_abs(inputdev, ABS_Y, val); + + + /* + * Shift the button byte right by one to + * make it look like the standard report + */ + buttonbyte = (device->buffer[5])>>1; + }else{ + + val = le16_to_cpu(get_unaligned((__le16 *) (&(device->buffer[1])))); + input_report_abs(inputdev, ABS_X, val); + + val = le16_to_cpu(get_unaligned((__le16 *) (&(device->buffer[3])))); + input_report_abs(inputdev, ABS_Y, val); + + buttonbyte = device->buffer[5]; + + } + + + /* BUTTONS and PROXIMITY */ + if (buttonbyte& MASK_INRANGE){ + val = 1; + }else{ + val=0; + } + input_report_abs(inputdev, ABS_DISTANCE, val); + + /* Convert buttons, only 4 bits possible */ + val = buttonbyte&0x0F; +#ifdef USE_BUTTONS + for ( i=0;i<5;i++){ + input_report_key(inputdev, BTN_DIGI+i,val&(1<<i)); + } +#else + /* We don't apply any meaning to the bitmask, just report */ + input_event(inputdev, EV_MSC, MSC_SERIAL, val); +#endif + /* TRANSDUCER */ + input_report_abs(inputdev, ABS_MISC, device->buffer[6]); + + } + } + + /* Everybody gets report ID's */ + input_event(inputdev, EV_MSC, MSC_RAW, device->buffer[0]); + + /* Sync it up */ + input_sync(inputdev); + + resubmit: + rc = usb_submit_urb(urbinfo, GFP_ATOMIC); + if (rc != 0) { + err("usb_submit_urb failed rc=0x%x",rc); + } + +} + +/* + * The probe routine. This is called when the kernel find the matching USB + * vendor/product. We do the following: + * + * - Allocate mem for a local structure to manage the device + * - Request a HID Report Descriptor from the device and parse it to + * find out the device parameters + * - Create an input device and assign it attributes + * - Allocate an URB so the device can talk to us when the input + * queue is open + */ +static int gtco_probe(struct usb_interface *usbinterface, + const struct usb_device_id *id) +{ + + struct gtco *device = NULL; + char path[PATHLENGTH]; + struct input_dev *inputdev; + struct hid_descriptor *hid_desc; + char *report; + int result=0, retry; + struct usb_endpoint_descriptor *endpoint; + + /* Allocate memory for device structure */ + device = kzalloc(sizeof(struct gtco), GFP_KERNEL); + if (device == NULL) { + err("No more memory"); + return -ENOMEM; + } + + + device->inputdevice = input_allocate_device(); + if (!device->inputdevice){ + kfree(device); + err("No more memory"); + return -ENOMEM; + } + + /* Get pointer to the input device */ + inputdev = device->inputdevice; + + /* Save interface information */ + device->usbdev = usb_get_dev(interface_to_usbdev(usbinterface)); + + + /* Allocate some data for incoming reports */ + device->buffer = usb_buffer_alloc(device->usbdev, REPORT_MAX_SIZE, + GFP_KERNEL, &(device->buf_dma)); + if (!device->buffer){ + input_free_device(device->inputdevice); + kfree(device); + err("No more memory"); + return -ENOMEM; + } + + /* Allocate URB for reports */ + device->urbinfo = usb_alloc_urb(0, GFP_KERNEL); + if (!device->urbinfo) { + usb_buffer_free(device->usbdev, REPORT_MAX_SIZE, + device->buffer, device->buf_dma); + input_free_device(device->inputdevice); + kfree(device); + err("No more memory"); + return -ENOMEM; + } + + + /* + * The endpoint is always altsetting 0, we know this since we know + * this device only has one interrupt endpoint + */ + endpoint = &usbinterface->altsetting[0].endpoint[0].desc; + + /* Some debug */ + dbg("gtco # interfaces: %d",usbinterface->num_altsetting); + dbg("num endpoints: %d",usbinterface->cur_altsetting->desc.bNumEndpoints); + dbg("interface class: %d",usbinterface->cur_altsetting->desc.bInterfaceClass); + dbg("endpoint: attribute:0x%x type:0x%x",endpoint->bmAttributes,endpoint->bDescriptorType); + if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) + dbg("endpoint: we have interrupt endpoint\n"); + + dbg("endpoint extra len:%d ",usbinterface->altsetting[0].extralen); + + + + /* + * Find the HID descriptor so we can find out the size of the + * HID report descriptor + */ + if (usb_get_extra_descriptor(usbinterface->cur_altsetting, + HID_DEVICE_TYPE,&hid_desc) != 0){ + err("Can't retrieve exta USB descriptor to get hid report descriptor length"); + usb_buffer_free(device->usbdev, REPORT_MAX_SIZE, + device->buffer, device->buf_dma); + input_free_device(device->inputdevice); + kfree(device); + return -EIO; + } + + dbg("Extra descriptor success: type:%d len:%d", + hid_desc->bDescriptorType, hid_desc->wDescriptorLength); + + if (!(report = kzalloc(hid_desc->wDescriptorLength, GFP_KERNEL))) { + usb_buffer_free(device->usbdev, REPORT_MAX_SIZE, + device->buffer, device->buf_dma); + + input_free_device(device->inputdevice); + kfree(device); + err("No more memory"); + return -ENOMEM; + } + + /* Couple of tries to get reply */ + for (retry=0;retry<3;retry++) { + result = usb_control_msg(device->usbdev, + usb_rcvctrlpipe(device->usbdev, 0), + USB_REQ_GET_DESCRIPTOR, + USB_RECIP_INTERFACE | USB_DIR_IN, + (REPORT_DEVICE_TYPE << 8), + 0, /* interface */ + report, + hid_desc->wDescriptorLength, + 5000); /* 5 secs */ + + if (result == hid_desc->wDescriptorLength) + break; + } + + /* If we didn't get the report, fail */ + dbg("usb_control_msg result: :%d", result); + if (result != hid_desc->wDescriptorLength){ + kfree(report); + usb_buffer_free(device->usbdev, REPORT_MAX_SIZE, + device->buffer, device->buf_dma); + input_free_device(device->inputdevice); + kfree(device); + err("Failed to get HID Report Descriptor of size: %d", + hid_desc->wDescriptorLength); + return -EIO; + } + + + /* Now we parse the report */ + parse_hid_report_descriptor(device,report,result); + + /* Now we delete it */ + kfree(report); + + /* Create a device file node */ + usb_make_path(device->usbdev, path, PATHLENGTH); + sprintf(device->usbpath, "%s/input0", path); + + + /* Set Input device functions */ + inputdev->open = gtco_input_open; + inputdev->close = gtco_input_close; + + /* Set input device information */ + inputdev->name = "GTCO_CalComp"; + inputdev->phys = device->usbpath; + inputdev->private = device; + + + /* Now set up all the input device capabilities */ + gtco_setup_caps(inputdev); + + /* Set input device required ID information */ + usb_to_input_id(device->usbdev, &device->inputdevice->id); + inputdev->cdev.dev = &usbinterface->dev; + + /* Setup the URB, it will be posted later on open of input device */ + endpoint = &usbinterface->altsetting[0].endpoint[0].desc; + + usb_fill_int_urb(device->urbinfo, + device->usbdev, + usb_rcvintpipe(device->usbdev, + endpoint->bEndpointAddress), + device->buffer, + REPORT_MAX_SIZE, + gtco_urb_callback, + device, + endpoint->bInterval); + + device->urbinfo->transfer_dma = device->buf_dma; + device->urbinfo->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + + /* Save device pointer in USB interface device */ + usb_set_intfdata(usbinterface, device); + + /* All done, now register the input device */ + input_register_device(inputdev); + + info( "gtco driver created usb: %s\n", path); + return 0; + +} + +/* + * This function is a standard USB function called when the USB device + * is disconnected. We will get rid of the URV, de-register the input + * device, and free up allocated memory + */ +static void gtco_disconnect(struct usb_interface *interface) +{ + + /* Grab private device ptr */ + struct gtco *device = usb_get_intfdata (interface); + struct input_dev *inputdev; + + inputdev = device->inputdevice; + + /* Now reverse all the registration stuff */ + if (device) { + input_unregister_device(inputdev); + usb_kill_urb(device->urbinfo); + usb_free_urb(device->urbinfo); + usb_buffer_free(device->usbdev, REPORT_MAX_SIZE, + device->buffer, device->buf_dma); + kfree(device); + } + + info("gtco driver disconnected"); +} + + +/* STANDARD MODULE LOAD ROUTINES */ + +static struct usb_driver gtco_driverinfo_table = { +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,16)) + .owner = THIS_MODULE, +#endif + .name = "gtco", + .id_table = gtco_usbid_table, + .probe = gtco_probe, + .disconnect = gtco_disconnect, +}; +/* + * Register this module with the USB subsystem + */ +static int __init gtco_init(void) +{ + int rc; + rc = usb_register(>co_driverinfo_table); + if (rc) { + err("usb_register() failed rc=0x%x", rc); + } + printk("GTCO usb driver version: %s",GTCO_VERSION); + return rc; +} + +/* + * Deregister this module with the USB subsystem + */ +static void __exit gtco_exit(void) +{ + usb_deregister(>co_driverinfo_table); +} + +module_init (gtco_init); +module_exit (gtco_exit); + +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index 0811c39bd14..84983d1b716 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -4,6 +4,7 @@ * Copyright (c) 1999 Andreas Gal * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz> * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc + * Copyright (c) 2006 Jiri Kosina */ /* @@ -32,8 +33,10 @@ #include <linux/usb.h> -#include "hid.h" +#include <linux/hid.h> #include <linux/hiddev.h> +#include <linux/hid-debug.h> +#include "usbhid.h" /* * Version Information @@ -55,887 +58,6 @@ module_param_named(mousepoll, hid_mousepoll_interval, uint, 0644); MODULE_PARM_DESC(mousepoll, "Polling interval of mice"); /* - * Register a new report for a device. - */ - -static struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id) -{ - struct hid_report_enum *report_enum = device->report_enum + type; - struct hid_report *report; - - if (report_enum->report_id_hash[id]) - return report_enum->report_id_hash[id]; - - if (!(report = kzalloc(sizeof(struct hid_report), GFP_KERNEL))) - return NULL; - - if (id != 0) - report_enum->numbered = 1; - - report->id = id; - report->type = type; - report->size = 0; - report->device = device; - report_enum->report_id_hash[id] = report; - - list_add_tail(&report->list, &report_enum->report_list); - - return report; -} - -/* - * Register a new field for this report. - */ - -static struct hid_field *hid_register_field(struct hid_report *report, unsigned usages, unsigned values) -{ - struct hid_field *field; - - if (report->maxfield == HID_MAX_FIELDS) { - dbg("too many fields in report"); - return NULL; - } - - if (!(field = kzalloc(sizeof(struct hid_field) + usages * sizeof(struct hid_usage) - + values * sizeof(unsigned), GFP_KERNEL))) return NULL; - - field->index = report->maxfield++; - report->field[field->index] = field; - field->usage = (struct hid_usage *)(field + 1); - field->value = (unsigned *)(field->usage + usages); - field->report = report; - - return field; -} - -/* - * Open a collection. The type/usage is pushed on the stack. - */ - -static int open_collection(struct hid_parser *parser, unsigned type) -{ - struct hid_collection *collection; - unsigned usage; - - usage = parser->local.usage[0]; - - if (parser->collection_stack_ptr == HID_COLLECTION_STACK_SIZE) { - dbg("collection stack overflow"); - return -1; - } - - if (parser->device->maxcollection == parser->device->collection_size) { - collection = kmalloc(sizeof(struct hid_collection) * - parser->device->collection_size * 2, GFP_KERNEL); - if (collection == NULL) { - dbg("failed to reallocate collection array"); - return -1; - } - memcpy(collection, parser->device->collection, - sizeof(struct hid_collection) * - parser->device->collection_size); - memset(collection + parser->device->collection_size, 0, - sizeof(struct hid_collection) * - parser->device->collection_size); - kfree(parser->device->collection); - parser->device->collection = collection; - parser->device->collection_size *= 2; - } - - parser->collection_stack[parser->collection_stack_ptr++] = - parser->device->maxcollection; - - collection = parser->device->collection + - parser->device->maxcollection++; - collection->type = type; - collection->usage = usage; - collection->level = parser->collection_stack_ptr - 1; - - if (type == HID_COLLECTION_APPLICATION) - parser->device->maxapplication++; - - return 0; -} - -/* - * Close a collection. - */ - -static int close_collection(struct hid_parser *parser) -{ - if (!parser->collection_stack_ptr) { - dbg("collection stack underflow"); - return -1; - } - parser->collection_stack_ptr--; - return 0; -} - -/* - * Climb up the stack, search for the specified collection type - * and return the usage. - */ - -static unsigned hid_lookup_collection(struct hid_parser *parser, unsigned type) -{ - int n; - for (n = parser->collection_stack_ptr - 1; n >= 0; n--) - if (parser->device->collection[parser->collection_stack[n]].type == type) - return parser->device->collection[parser->collection_stack[n]].usage; - return 0; /* we know nothing about this usage type */ -} - -/* - * Add a usage to the temporary parser table. - */ - -static int hid_add_usage(struct hid_parser *parser, unsigned usage) -{ - if (parser->local.usage_index >= HID_MAX_USAGES) { - dbg("usage index exceeded"); - return -1; - } - parser->local.usage[parser->local.usage_index] = usage; - parser->local.collection_index[parser->local.usage_index] = - parser->collection_stack_ptr ? - parser->collection_stack[parser->collection_stack_ptr - 1] : 0; - parser->local.usage_index++; - return 0; -} - -/* - * Register a new field for this report. - */ - -static int hid_add_field(struct hid_parser *parser, unsigned report_type, unsigned flags) -{ - struct hid_report *report; - struct hid_field *field; - int usages; - unsigned offset; - int i; - - if (!(report = hid_register_report(parser->device, report_type, parser->global.report_id))) { - dbg("hid_register_report failed"); - return -1; - } - - if (parser->global.logical_maximum < parser->global.logical_minimum) { - dbg("logical range invalid %d %d", parser->global.logical_minimum, parser->global.logical_maximum); - return -1; - } - - offset = report->size; - report->size += parser->global.report_size * parser->global.report_count; - - if (!parser->local.usage_index) /* Ignore padding fields */ - return 0; - - usages = max_t(int, parser->local.usage_index, parser->global.report_count); - - if ((field = hid_register_field(report, usages, parser->global.report_count)) == NULL) - return 0; - - field->physical = hid_lookup_collection(parser, HID_COLLECTION_PHYSICAL); - field->logical = hid_lookup_collection(parser, HID_COLLECTION_LOGICAL); - field->application = hid_lookup_collection(parser, HID_COLLECTION_APPLICATION); - - for (i = 0; i < usages; i++) { - int j = i; - /* Duplicate the last usage we parsed if we have excess values */ - if (i >= parser->local.usage_index) - j = parser->local.usage_index - 1; - field->usage[i].hid = parser->local.usage[j]; - field->usage[i].collection_index = - parser->local.collection_index[j]; - } - - field->maxusage = usages; - field->flags = flags; - field->report_offset = offset; - field->report_type = report_type; - field->report_size = parser->global.report_size; - field->report_count = parser->global.report_count; - field->logical_minimum = parser->global.logical_minimum; - field->logical_maximum = parser->global.logical_maximum; - field->physical_minimum = parser->global.physical_minimum; - field->physical_maximum = parser->global.physical_maximum; - field->unit_exponent = parser->global.unit_exponent; - field->unit = parser->global.unit; - - return 0; -} - -/* - * Read data value from item. - */ - -static u32 item_udata(struct hid_item *item) -{ - switch (item->size) { - case 1: return item->data.u8; - case 2: return item->data.u16; - case 4: return item->data.u32; - } - return 0; -} - -static s32 item_sdata(struct hid_item *item) -{ - switch (item->size) { - case 1: return item->data.s8; - case 2: return item->data.s16; - case 4: return item->data.s32; - } - return 0; -} - -/* - * Process a global item. - */ - -static int hid_parser_global(struct hid_parser *parser, struct hid_item *item) -{ - switch (item->tag) { - - case HID_GLOBAL_ITEM_TAG_PUSH: - - if (parser->global_stack_ptr == HID_GLOBAL_STACK_SIZE) { - dbg("global enviroment stack overflow"); - return -1; - } - - memcpy(parser->global_stack + parser->global_stack_ptr++, - &parser->global, sizeof(struct hid_global)); - return 0; - - case HID_GLOBAL_ITEM_TAG_POP: - - if (!parser->global_stack_ptr) { - dbg("global enviroment stack underflow"); - return -1; - } - - memcpy(&parser->global, parser->global_stack + --parser->global_stack_ptr, - sizeof(struct hid_global)); - return 0; - - case HID_GLOBAL_ITEM_TAG_USAGE_PAGE: - parser->global.usage_page = item_udata(item); - return 0; - - case HID_GLOBAL_ITEM_TAG_LOGICAL_MINIMUM: - parser->global.logical_minimum = item_sdata(item); - return 0; - - case HID_GLOBAL_ITEM_TAG_LOGICAL_MAXIMUM: - if (parser->global.logical_minimum < 0) - parser->global.logical_maximum = item_sdata(item); - else - parser->global.logical_maximum = item_udata(item); - return 0; - - case HID_GLOBAL_ITEM_TAG_PHYSICAL_MINIMUM: - parser->global.physical_minimum = item_sdata(item); - return 0; - - case HID_GLOBAL_ITEM_TAG_PHYSICAL_MAXIMUM: - if (parser->global.physical_minimum < 0) - parser->global.physical_maximum = item_sdata(item); - else - parser->global.physical_maximum = item_udata(item); - return 0; - - case HID_GLOBAL_ITEM_TAG_UNIT_EXPONENT: - parser->global.unit_exponent = item_sdata(item); - return 0; - - case HID_GLOBAL_ITEM_TAG_UNIT: - parser->global.unit = item_udata(item); - return 0; - - case HID_GLOBAL_ITEM_TAG_REPORT_SIZE: - if ((parser->global.report_size = item_udata(item)) > 32) { - dbg("invalid report_size %d", parser->global.report_size); - return -1; - } - return 0; - - case HID_GLOBAL_ITEM_TAG_REPORT_COUNT: - if ((parser->global.report_count = item_udata(item)) > HID_MAX_USAGES) { - dbg("invalid report_count %d", parser->global.report_count); - return -1; - } - return 0; - - case HID_GLOBAL_ITEM_TAG_REPORT_ID: - if ((parser->global.report_id = item_udata(item)) == 0) { - dbg("report_id 0 is invalid"); - return -1; - } - return 0; - - default: - dbg("unknown global tag 0x%x", item->tag); - return -1; - } -} - -/* - * Process a local item. - */ - -static int hid_parser_local(struct hid_parser *parser, struct hid_item *item) -{ - __u32 data; - unsigned n; - - if (item->size == 0) { - dbg("item data expected for local item"); - return -1; - } - - data = item_udata(item); - - switch (item->tag) { - - case HID_LOCAL_ITEM_TAG_DELIMITER: - - if (data) { - /* - * We treat items before the first delimiter - * as global to all usage sets (branch 0). - * In the moment we process only these global - * items and the first delimiter set. - */ - if (parser->local.delimiter_depth != 0) { - dbg("nested delimiters"); - return -1; - } - parser->local.delimiter_depth++; - parser->local.delimiter_branch++; - } else { - if (parser->local.delimiter_depth < 1) { - dbg("bogus close delimiter"); - return -1; - } - parser->local.delimiter_depth--; - } - return 1; - - case HID_LOCAL_ITEM_TAG_USAGE: - - if (parser->local.delimiter_branch > 1) { - dbg("alternative usage ignored"); - return 0; - } - - if (item->size <= 2) - data = (parser->global.usage_page << 16) + data; - - return hid_add_usage(parser, data); - - case HID_LOCAL_ITEM_TAG_USAGE_MINIMUM: - - if (parser->local.delimiter_branch > 1) { - dbg("alternative usage ignored"); - return 0; - } - - if (item->size <= 2) - data = (parser->global.usage_page << 16) + data; - - parser->local.usage_minimum = data; - return 0; - - case HID_LOCAL_ITEM_TAG_USAGE_MAXIMUM: - - if (parser->local.delimiter_branch > 1) { - dbg("alternative usage ignored"); - return 0; - } - - if (item->size <= 2) - data = (parser->global.usage_page << 16) + data; - - for (n = parser->local.usage_minimum; n <= data; n++) - if (hid_add_usage(parser, n)) { - dbg("hid_add_usage failed\n"); - return -1; - } - return 0; - - default: - - dbg("unknown local item tag 0x%x", item->tag); - return 0; - } - return 0; -} - -/* - * Process a main item. - */ - -static int hid_parser_main(struct hid_parser *parser, struct hid_item *item) -{ - __u32 data; - int ret; - - data = item_udata(item); - - switch (item->tag) { - case HID_MAIN_ITEM_TAG_BEGIN_COLLECTION: - ret = open_collection(parser, data & 0xff); - break; - case HID_MAIN_ITEM_TAG_END_COLLECTION: - ret = close_collection(parser); - break; - case HID_MAIN_ITEM_TAG_INPUT: - ret = hid_add_field(parser, HID_INPUT_REPORT, data); - break; - case HID_MAIN_ITEM_TAG_OUTPUT: - ret = hid_add_field(parser, HID_OUTPUT_REPORT, data); - break; - case HID_MAIN_ITEM_TAG_FEATURE: - ret = hid_add_field(parser, HID_FEATURE_REPORT, data); - break; - default: - dbg("unknown main item tag 0x%x", item->tag); - ret = 0; - } - - memset(&parser->local, 0, sizeof(parser->local)); /* Reset the local parser environment */ - - return ret; -} - -/* - * Process a reserved item. - */ - -static int hid_parser_reserved(struct hid_parser *parser, struct hid_item *item) -{ - dbg("reserved item type, tag 0x%x", item->tag); - return 0; -} - -/* - * Free a report and all registered fields. The field->usage and - * field->value table's are allocated behind the field, so we need - * only to free(field) itself. - */ - -static void hid_free_report(struct hid_report *report) -{ - unsigned n; - - for (n = 0; n < report->maxfield; n++) - kfree(report->field[n]); - kfree(report); -} - -/* - * Free a device structure, all reports, and all fields. - */ - -static void hid_free_device(struct hid_device *device) -{ - unsigned i,j; - - for (i = 0; i < HID_REPORT_TYPES; i++) { - struct hid_report_enum *report_enum = device->report_enum + i; - - for (j = 0; j < 256; j++) { - struct hid_report *report = report_enum->report_id_hash[j]; - if (report) - hid_free_report(report); - } - } - - kfree(device->rdesc); - kfree(device); -} - -/* - * Fetch a report description item from the data stream. We support long - * items, though they are not used yet. - */ - -static u8 *fetch_item(__u8 *start, __u8 *end, struct hid_item *item) -{ - u8 b; - - if ((end - start) <= 0) - return NULL; - - b = *start++; - - item->type = (b >> 2) & 3; - item->tag = (b >> 4) & 15; - - if (item->tag == HID_ITEM_TAG_LONG) { - - item->format = HID_ITEM_FORMAT_LONG; - - if ((end - start) < 2) - return NULL; - - item->size = *start++; - item->tag = *start++; - - if ((end - start) < item->size) - return NULL; - - item->data.longdata = start; - start += item->size; - return start; - } - - item->format = HID_ITEM_FORMAT_SHORT; - item->size = b & 3; - - switch (item->size) { - - case 0: - return start; - - case 1: - if ((end - start) < 1) - return NULL; - item->data.u8 = *start++; - return start; - - case 2: - if ((end - start) < 2) - return NULL; - item->data.u16 = le16_to_cpu(get_unaligned((__le16*)start)); - start = (__u8 *)((__le16 *)start + 1); - return start; - - case 3: - item->size++; - if ((end - start) < 4) - return NULL; - item->data.u32 = le32_to_cpu(get_unaligned((__le32*)start)); - start = (__u8 *)((__le32 *)start + 1); - return start; - } - - return NULL; -} - -/* - * Parse a report description into a hid_device structure. Reports are - * enumerated, fields are attached to these reports. - */ - -static struct hid_device *hid_parse_report(__u8 *start, unsigned size) -{ - struct hid_device *device; - struct hid_parser *parser; - struct hid_item item; - __u8 *end; - unsigned i; - static int (*dispatch_type[])(struct hid_parser *parser, - struct hid_item *item) = { - hid_parser_main, - hid_parser_global, - hid_parser_local, - hid_parser_reserved - }; - - if (!(device = kzalloc(sizeof(struct hid_device), GFP_KERNEL))) - return NULL; - - if (!(device->collection = kzalloc(sizeof(struct hid_collection) * - HID_DEFAULT_NUM_COLLECTIONS, GFP_KERNEL))) { - kfree(device); - return NULL; - } - device->collection_size = HID_DEFAULT_NUM_COLLECTIONS; - - for (i = 0; i < HID_REPORT_TYPES; i++) - INIT_LIST_HEAD(&device->report_enum[i].report_list); - - if (!(device->rdesc = (__u8 *)kmalloc(size, GFP_KERNEL))) { - kfree(device->collection); - kfree(device); - return NULL; - } - memcpy(device->rdesc, start, size); - device->rsize = size; - - if (!(parser = kzalloc(sizeof(struct hid_parser), GFP_KERNEL))) { - kfree(device->rdesc); - kfree(device->collection); - kfree(device); - return NULL; - } - parser->device = device; - - end = start + size; - while ((start = fetch_item(start, end, &item)) != NULL) { - - if (item.format != HID_ITEM_FORMAT_SHORT) { - dbg("unexpected long global item"); - kfree(device->collection); - hid_free_device(device); - kfree(parser); - return NULL; - } - - if (dispatch_type[item.type](parser, &item)) { - dbg("item %u %u %u %u parsing failed\n", - item.format, (unsigned)item.size, (unsigned)item.type, (unsigned)item.tag); - kfree(device->collection); - hid_free_device(device); - kfree(parser); - return NULL; - } - - if (start == end) { - if (parser->collection_stack_ptr) { - dbg("unbalanced collection at end of report description"); - kfree(device->collection); - hid_free_device(device); - kfree(parser); - return NULL; - } - if (parser->local.delimiter_depth) { - dbg("unbalanced delimiter at end of report description"); - kfree(device->collection); - hid_free_device(device); - kfree(parser); - return NULL; - } - kfree(parser); - return device; - } - } - - dbg("item fetching failed at offset %d\n", (int)(end - start)); - kfree(device->collection); - hid_free_device(device); - kfree(parser); - return NULL; -} - -/* - * Convert a signed n-bit integer to signed 32-bit integer. Common - * cases are done through the compiler, the screwed things has to be - * done by hand. - */ - -static s32 snto32(__u32 value, unsigned n) -{ - switch (n) { - case 8: return ((__s8)value); - case 16: return ((__s16)value); - case 32: return ((__s32)value); - } - return value & (1 << (n - 1)) ? value | (-1 << n) : value; -} - -/* - * Convert a signed 32-bit integer to a signed n-bit integer. - */ - -static u32 s32ton(__s32 value, unsigned n) -{ - s32 a = value >> (n - 1); - if (a && a != -1) - return value < 0 ? 1 << (n - 1) : (1 << (n - 1)) - 1; - return value & ((1 << n) - 1); -} - -/* - * Extract/implement a data field from/to a little endian report (bit array). - * - * Code sort-of follows HID spec: - * http://www.usb.org/developers/devclass_docs/HID1_11.pdf - * - * While the USB HID spec allows unlimited length bit fields in "report - * descriptors", most devices never use more than 16 bits. - * One model of UPS is claimed to report "LINEV" as a 32-bit field. - * Search linux-kernel and linux-usb-devel archives for "hid-core extract". - */ - -static __inline__ __u32 extract(__u8 *report, unsigned offset, unsigned n) -{ - u64 x; - - WARN_ON(n > 32); - - report += offset >> 3; /* adjust byte index */ - offset &= 7; /* now only need bit offset into one byte */ - x = get_unaligned((u64 *) report); - x = le64_to_cpu(x); - x = (x >> offset) & ((1ULL << n) - 1); /* extract bit field */ - return (u32) x; -} - -/* - * "implement" : set bits in a little endian bit stream. - * Same concepts as "extract" (see comments above). - * The data mangled in the bit stream remains in little endian - * order the whole time. It make more sense to talk about - * endianness of register values by considering a register - * a "cached" copy of the little endiad bit stream. - */ -static __inline__ void implement(__u8 *report, unsigned offset, unsigned n, __u32 value) -{ - u64 x; - u64 m = (1ULL << n) - 1; - - WARN_ON(n > 32); - - WARN_ON(value > m); - value &= m; - - report += offset >> 3; - offset &= 7; - - x = get_unaligned((u64 *)report); - x &= cpu_to_le64(~(m << offset)); - x |= cpu_to_le64(((u64) value) << offset); - put_unaligned(x, (u64 *) report); -} - -/* - * Search an array for a value. - */ - -static __inline__ int search(__s32 *array, __s32 value, unsigned n) -{ - while (n--) { - if (*array++ == value) - return 0; - } - return -1; -} - -static void hid_process_event(struct hid_device *hid, struct hid_field *field, struct hid_usage *usage, __s32 value, int interrupt) -{ - hid_dump_input(usage, value); - if (hid->claimed & HID_CLAIMED_INPUT) - hidinput_hid_event(hid, field, usage, value); - if (hid->claimed & HID_CLAIMED_HIDDEV && interrupt) - hiddev_hid_event(hid, field, usage, value); -} - -/* - * Analyse a received field, and fetch the data from it. The field - * content is stored for next report processing (we do differential - * reporting to the layer). - */ - -static void hid_input_field(struct hid_device *hid, struct hid_field *field, __u8 *data, int interrupt) -{ - unsigned n; - unsigned count = field->report_count; - unsigned offset = field->report_offset; - unsigned size = field->report_size; - __s32 min = field->logical_minimum; - __s32 max = field->logical_maximum; - __s32 *value; - - if (!(value = kmalloc(sizeof(__s32) * count, GFP_ATOMIC))) - return; - - for (n = 0; n < count; n++) { - - value[n] = min < 0 ? snto32(extract(data, offset + n * size, size), size) : - extract(data, offset + n * size, size); - - if (!(field->flags & HID_MAIN_ITEM_VARIABLE) /* Ignore report if ErrorRollOver */ - && value[n] >= min && value[n] <= max - && field->usage[value[n] - min].hid == HID_UP_KEYBOARD + 1) - goto exit; - } - - for (n = 0; n < count; n++) { - - if (HID_MAIN_ITEM_VARIABLE & field->flags) { - hid_process_event(hid, field, &field->usage[n], value[n], interrupt); - continue; - } - - if (field->value[n] >= min && field->value[n] <= max - && field->usage[field->value[n] - min].hid - && search(value, field->value[n], count)) - hid_process_event(hid, field, &field->usage[field->value[n] - min], 0, interrupt); - - if (value[n] >= min && value[n] <= max - && field->usage[value[n] - min].hid - && search(field->value, value[n], count)) - hid_process_event(hid, field, &field->usage[value[n] - min], 1, interrupt); - } - - memcpy(field->value, value, count * sizeof(__s32)); -exit: - kfree(value); -} - -static int hid_input_report(int type, struct urb *urb, int interrupt) -{ - struct hid_device *hid = urb->context; - struct hid_report_enum *report_enum = hid->report_enum + type; - u8 *data = urb->transfer_buffer; - int len = urb->actual_length; - struct hid_report *report; - int n, size; - - if (!len) { - dbg("empty report"); - return -1; - } - -#ifdef DEBUG_DATA - printk(KERN_DEBUG __FILE__ ": report (size %u) (%snumbered)\n", len, report_enum->numbered ? "" : "un"); -#endif - - n = 0; /* Normally report number is 0 */ - if (report_enum->numbered) { /* Device uses numbered reports, data[0] is report number */ - n = *data++; - len--; - } - -#ifdef DEBUG_DATA - { - int i; - printk(KERN_DEBUG __FILE__ ": report %d (size %u) = ", n, len); - for (i = 0; i < len; i++) - printk(" %02x", data[i]); - printk("\n"); - } -#endif - - if (!(report = report_enum->report_id_hash[n])) { - dbg("undefined report_id %d received", n); - return -1; - } - - size = ((report->size - 1) >> 3) + 1; - - if (len < size) { - dbg("report %d is too short, (%d < %d)", report->id, len, size); - memset(data + len, 0, size - len); - } - - if (hid->claimed & HID_CLAIMED_HIDDEV) - hiddev_report_event(hid, report); - - for (n = 0; n < report->maxfield; n++) - hid_input_field(hid, report->field[n], data, interrupt); - - if (hid->claimed & HID_CLAIMED_INPUT) - hidinput_report_event(hid, report); - - return 0; -} - -/* * Input submission and I/O error handler. */ @@ -946,15 +68,16 @@ static int hid_start_in(struct hid_device *hid) { unsigned long flags; int rc = 0; + struct usbhid_device *usbhid = hid->driver_data; - spin_lock_irqsave(&hid->inlock, flags); - if (hid->open > 0 && !test_bit(HID_SUSPENDED, &hid->iofl) && - !test_and_set_bit(HID_IN_RUNNING, &hid->iofl)) { - rc = usb_submit_urb(hid->urbin, GFP_ATOMIC); + spin_lock_irqsave(&usbhid->inlock, flags); + if (hid->open > 0 && !test_bit(HID_SUSPENDED, &usbhid->iofl) && + !test_and_set_bit(HID_IN_RUNNING, &usbhid->iofl)) { + rc = usb_submit_urb(usbhid->urbin, GFP_ATOMIC); if (rc != 0) - clear_bit(HID_IN_RUNNING, &hid->iofl); + clear_bit(HID_IN_RUNNING, &usbhid->iofl); } - spin_unlock_irqrestore(&hid->inlock, flags); + spin_unlock_irqrestore(&usbhid->inlock, flags); return rc; } @@ -962,8 +85,9 @@ static int hid_start_in(struct hid_device *hid) static void hid_retry_timeout(unsigned long _hid) { struct hid_device *hid = (struct hid_device *) _hid; + struct usbhid_device *usbhid = hid->driver_data; - dev_dbg(&hid->intf->dev, "retrying intr urb\n"); + dev_dbg(&usbhid->intf->dev, "retrying intr urb\n"); if (hid_start_in(hid)) hid_io_error(hid); } @@ -971,38 +95,39 @@ static void hid_retry_timeout(unsigned long _hid) /* Workqueue routine to reset the device or clear a halt */ static void hid_reset(struct work_struct *work) { - struct hid_device *hid = - container_of(work, struct hid_device, reset_work); + struct usbhid_device *usbhid = + container_of(work, struct usbhid_device, reset_work); + struct hid_device *hid = usbhid->hid; int rc_lock, rc = 0; - if (test_bit(HID_CLEAR_HALT, &hid->iofl)) { - dev_dbg(&hid->intf->dev, "clear halt\n"); - rc = usb_clear_halt(hid->dev, hid->urbin->pipe); - clear_bit(HID_CLEAR_HALT, &hid->iofl); + if (test_bit(HID_CLEAR_HALT, &usbhid->iofl)) { + dev_dbg(&usbhid->intf->dev, "clear halt\n"); + rc = usb_clear_halt(hid_to_usb_dev(hid), usbhid->urbin->pipe); + clear_bit(HID_CLEAR_HALT, &usbhid->iofl); hid_start_in(hid); } - else if (test_bit(HID_RESET_PENDING, &hid->iofl)) { - dev_dbg(&hid->intf->dev, "resetting device\n"); - rc = rc_lock = usb_lock_device_for_reset(hid->dev, hid->intf); + else if (test_bit(HID_RESET_PENDING, &usbhid->iofl)) { + dev_dbg(&usbhid->intf->dev, "resetting device\n"); + rc = rc_lock = usb_lock_device_for_reset(hid_to_usb_dev(hid), usbhid->intf); if (rc_lock >= 0) { - rc = usb_reset_composite_device(hid->dev, hid->intf); + rc = usb_reset_composite_device(hid_to_usb_dev(hid), usbhid->intf); if (rc_lock) - usb_unlock_device(hid->dev); + usb_unlock_device(hid_to_usb_dev(hid)); } - clear_bit(HID_RESET_PENDING, &hid->iofl); + clear_bit(HID_RESET_PENDING, &usbhid->iofl); } switch (rc) { case 0: - if (!test_bit(HID_IN_RUNNING, &hid->iofl)) + if (!test_bit(HID_IN_RUNNING, &usbhid->iofl)) hid_io_error(hid); break; default: err("can't reset device, %s-%s/input%d, status %d", - hid->dev->bus->bus_name, - hid->dev->devpath, - hid->ifnum, rc); + hid_to_usb_dev(hid)->bus->bus_name, + hid_to_usb_dev(hid)->devpath, + usbhid->ifnum, rc); /* FALLTHROUGH */ case -EHOSTUNREACH: case -ENODEV: @@ -1015,33 +140,34 @@ static void hid_reset(struct work_struct *work) static void hid_io_error(struct hid_device *hid) { unsigned long flags; + struct usbhid_device *usbhid = hid->driver_data; - spin_lock_irqsave(&hid->inlock, flags); + spin_lock_irqsave(&usbhid->inlock, flags); /* Stop when disconnected */ - if (usb_get_intfdata(hid->intf) == NULL) + if (usb_get_intfdata(usbhid->intf) == NULL) goto done; /* When an error occurs, retry at increasing intervals */ - if (hid->retry_delay == 0) { - hid->retry_delay = 13; /* Then 26, 52, 104, 104, ... */ - hid->stop_retry = jiffies + msecs_to_jiffies(1000); - } else if (hid->retry_delay < 100) - hid->retry_delay *= 2; + if (usbhid->retry_delay == 0) { + usbhid->retry_delay = 13; /* Then 26, 52, 104, 104, ... */ + usbhid->stop_retry = jiffies + msecs_to_jiffies(1000); + } else if (usbhid->retry_delay < 100) + usbhid->retry_delay *= 2; - if (time_after(jiffies, hid->stop_retry)) { + if (time_after(jiffies, usbhid->stop_retry)) { /* Retries failed, so do a port reset */ - if (!test_and_set_bit(HID_RESET_PENDING, &hid->iofl)) { - schedule_work(&hid->reset_work); + if (!test_and_set_bit(HID_RESET_PENDING, &usbhid->iofl)) { + schedule_work(&usbhid->reset_work); goto done; } } - mod_timer(&hid->io_retry, - jiffies + msecs_to_jiffies(hid->retry_delay)); + mod_timer(&usbhid->io_retry, + jiffies + msecs_to_jiffies(usbhid->retry_delay)); done: - spin_unlock_irqrestore(&hid->inlock, flags); + spin_unlock_irqrestore(&usbhid->inlock, flags); } /* @@ -1051,28 +177,31 @@ done: static void hid_irq_in(struct urb *urb) { struct hid_device *hid = urb->context; + struct usbhid_device *usbhid = hid->driver_data; int status; switch (urb->status) { case 0: /* success */ - hid->retry_delay = 0; - hid_input_report(HID_INPUT_REPORT, urb, 1); + usbhid->retry_delay = 0; + hid_input_report(urb->context, HID_INPUT_REPORT, + urb->transfer_buffer, + urb->actual_length, 1); break; case -EPIPE: /* stall */ - clear_bit(HID_IN_RUNNING, &hid->iofl); - set_bit(HID_CLEAR_HALT, &hid->iofl); - schedule_work(&hid->reset_work); + clear_bit(HID_IN_RUNNING, &usbhid->iofl); + set_bit(HID_CLEAR_HALT, &usbhid->iofl); + schedule_work(&usbhid->reset_work); return; case -ECONNRESET: /* unlink */ case -ENOENT: case -ESHUTDOWN: /* unplug */ - clear_bit(HID_IN_RUNNING, &hid->iofl); + clear_bit(HID_IN_RUNNING, &usbhid->iofl); return; case -EILSEQ: /* protocol error or unplug */ case -EPROTO: /* protocol error or unplug */ case -ETIME: /* protocol error or unplug */ case -ETIMEDOUT: /* Should never happen, but... */ - clear_bit(HID_IN_RUNNING, &hid->iofl); + clear_bit(HID_IN_RUNNING, &usbhid->iofl); hid_io_error(hid); return; default: /* error */ @@ -1081,108 +210,31 @@ static void hid_irq_in(struct urb *urb) status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { - clear_bit(HID_IN_RUNNING, &hid->iofl); + clear_bit(HID_IN_RUNNING, &usbhid->iofl); if (status != -EPERM) { err("can't resubmit intr, %s-%s/input%d, status %d", - hid->dev->bus->bus_name, - hid->dev->devpath, - hid->ifnum, status); + hid_to_usb_dev(hid)->bus->bus_name, + hid_to_usb_dev(hid)->devpath, + usbhid->ifnum, status); hid_io_error(hid); } } } -/* - * Output the field into the report. - */ - -static void hid_output_field(struct hid_field *field, __u8 *data) -{ - unsigned count = field->report_count; - unsigned offset = field->report_offset; - unsigned size = field->report_size; - unsigned n; - - for (n = 0; n < count; n++) { - if (field->logical_minimum < 0) /* signed values */ - implement(data, offset + n * size, size, s32ton(field->value[n], size)); - else /* unsigned values */ - implement(data, offset + n * size, size, field->value[n]); - } -} - -/* - * Create a report. - */ - -static void hid_output_report(struct hid_report *report, __u8 *data) -{ - unsigned n; - - if (report->id > 0) - *data++ = report->id; - - for (n = 0; n < report->maxfield; n++) - hid_output_field(report->field[n], data); -} - -/* - * Set a field value. The report this field belongs to has to be - * created and transferred to the device, to set this value in the - * device. - */ - -int hid_set_field(struct hid_field *field, unsigned offset, __s32 value) -{ - unsigned size = field->report_size; - - hid_dump_input(field->usage + offset, value); - - if (offset >= field->report_count) { - dbg("offset (%d) exceeds report_count (%d)", offset, field->report_count); - hid_dump_field(field, 8); - return -1; - } - if (field->logical_minimum < 0) { - if (value != snto32(s32ton(value, size), size)) { - dbg("value %d is out of range", value); - return -1; - } - } - field->value[offset] = value; - return 0; -} - -/* - * Find a report field with a specified HID usage. - */ -#if 0 -struct hid_field *hid_find_field_by_usage(struct hid_device *hid, __u32 wanted_usage, int type) -{ - struct hid_report *report; - int i; - - list_for_each_entry(report, &hid->report_enum[type].report_list, list) - for (i = 0; i < report->maxfield; i++) - if (report->field[i]->logical == wanted_usage) - return report->field[i]; - return NULL; -} -#endif /* 0 */ - static int hid_submit_out(struct hid_device *hid) { struct hid_report *report; + struct usbhid_device *usbhid = hid->driver_data; - report = hid->out[hid->outtail]; + report = usbhid->out[usbhid->outtail]; - hid_output_report(report, hid->outbuf); - hid->urbout->transfer_buffer_length = ((report->size - 1) >> 3) + 1 + (report->id > 0); - hid->urbout->dev = hid->dev; + hid_output_report(report, usbhid->outbuf); + usbhid->urbout->transfer_buffer_length = ((report->size - 1) >> 3) + 1 + (report->id > 0); + usbhid->urbout->dev = hid_to_usb_dev(hid); dbg("submitting out urb"); - if (usb_submit_urb(hid->urbout, GFP_ATOMIC)) { + if (usb_submit_urb(usbhid->urbout, GFP_ATOMIC)) { err("usb_submit_urb(out) failed"); return -1; } @@ -1195,42 +247,43 @@ static int hid_submit_ctrl(struct hid_device *hid) struct hid_report *report; unsigned char dir; int len; + struct usbhid_device *usbhid = hid->driver_data; - report = hid->ctrl[hid->ctrltail].report; - dir = hid->ctrl[hid->ctrltail].dir; + report = usbhid->ctrl[usbhid->ctrltail].report; + dir = usbhid->ctrl[usbhid->ctrltail].dir; len = ((report->size - 1) >> 3) + 1 + (report->id > 0); if (dir == USB_DIR_OUT) { - hid_output_report(report, hid->ctrlbuf); - hid->urbctrl->pipe = usb_sndctrlpipe(hid->dev, 0); - hid->urbctrl->transfer_buffer_length = len; + hid_output_report(report, usbhid->ctrlbuf); + usbhid->urbctrl->pipe = usb_sndctrlpipe(hid_to_usb_dev(hid), 0); + usbhid->urbctrl->transfer_buffer_length = len; } else { int maxpacket, padlen; - hid->urbctrl->pipe = usb_rcvctrlpipe(hid->dev, 0); - maxpacket = usb_maxpacket(hid->dev, hid->urbctrl->pipe, 0); + usbhid->urbctrl->pipe = usb_rcvctrlpipe(hid_to_usb_dev(hid), 0); + maxpacket = usb_maxpacket(hid_to_usb_dev(hid), usbhid->urbctrl->pipe, 0); if (maxpacket > 0) { padlen = (len + maxpacket - 1) / maxpacket; padlen *= maxpacket; - if (padlen > hid->bufsize) - padlen = hid->bufsize; + if (padlen > usbhid->bufsize) + padlen = usbhid->bufsize; } else padlen = 0; - hid->urbctrl->transfer_buffer_length = padlen; + usbhid->urbctrl->transfer_buffer_length = padlen; } - hid->urbctrl->dev = hid->dev; + usbhid->urbctrl->dev = hid_to_usb_dev(hid); - hid->cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE | dir; - hid->cr->bRequest = (dir == USB_DIR_OUT) ? HID_REQ_SET_REPORT : HID_REQ_GET_REPORT; - hid->cr->wValue = cpu_to_le16(((report->type + 1) << 8) | report->id); - hid->cr->wIndex = cpu_to_le16(hid->ifnum); - hid->cr->wLength = cpu_to_le16(len); + usbhid->cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE | dir; + usbhid->cr->bRequest = (dir == USB_DIR_OUT) ? HID_REQ_SET_REPORT : HID_REQ_GET_REPORT; + usbhid->cr->wValue = cpu_to_le16(((report->type + 1) << 8) | report->id); + usbhid->cr->wIndex = cpu_to_le16(usbhid->ifnum); + usbhid->cr->wLength = cpu_to_le16(len); dbg("submitting ctrl urb: %s wValue=0x%04x wIndex=0x%04x wLength=%u", - hid->cr->bRequest == HID_REQ_SET_REPORT ? "Set_Report" : "Get_Report", - hid->cr->wValue, hid->cr->wIndex, hid->cr->wLength); + usbhid->cr->bRequest == HID_REQ_SET_REPORT ? "Set_Report" : "Get_Report", + usbhid->cr->wValue, usbhid->cr->wIndex, usbhid->cr->wLength); - if (usb_submit_urb(hid->urbctrl, GFP_ATOMIC)) { + if (usb_submit_urb(usbhid->urbctrl, GFP_ATOMIC)) { err("usb_submit_urb(ctrl) failed"); return -1; } @@ -1245,6 +298,7 @@ static int hid_submit_ctrl(struct hid_device *hid) static void hid_irq_out(struct urb *urb) { struct hid_device *hid = urb->context; + struct usbhid_device *usbhid = hid->driver_data; unsigned long flags; int unplug = 0; @@ -1262,24 +316,24 @@ static void hid_irq_out(struct urb *urb) warn("output irq status %d received", urb->status); } - spin_lock_irqsave(&hid->outlock, flags); + spin_lock_irqsave(&usbhid->outlock, flags); if (unplug) - hid->outtail = hid->outhead; + usbhid->outtail = usbhid->outhead; else - hid->outtail = (hid->outtail + 1) & (HID_OUTPUT_FIFO_SIZE - 1); + usbhid->outtail = (usbhid->outtail + 1) & (HID_OUTPUT_FIFO_SIZE - 1); - if (hid->outhead != hid->outtail) { + if (usbhid->outhead != usbhid->outtail) { if (hid_submit_out(hid)) { - clear_bit(HID_OUT_RUNNING, &hid->iofl); + clear_bit(HID_OUT_RUNNING, &usbhid->iofl); wake_up(&hid->wait); } - spin_unlock_irqrestore(&hid->outlock, flags); + spin_unlock_irqrestore(&usbhid->outlock, flags); return; } - clear_bit(HID_OUT_RUNNING, &hid->iofl); - spin_unlock_irqrestore(&hid->outlock, flags); + clear_bit(HID_OUT_RUNNING, &usbhid->iofl); + spin_unlock_irqrestore(&usbhid->outlock, flags); wake_up(&hid->wait); } @@ -1290,15 +344,17 @@ static void hid_irq_out(struct urb *urb) static void hid_ctrl(struct urb *urb) { struct hid_device *hid = urb->context; + struct usbhid_device *usbhid = hid->driver_data; unsigned long flags; int unplug = 0; - spin_lock_irqsave(&hid->ctrllock, flags); + spin_lock_irqsave(&usbhid->ctrllock, flags); switch (urb->status) { case 0: /* success */ - if (hid->ctrl[hid->ctrltail].dir == USB_DIR_IN) - hid_input_report(hid->ctrl[hid->ctrltail].report->type, urb, 0); + if (usbhid->ctrl[usbhid->ctrltail].dir == USB_DIR_IN) + hid_input_report(urb->context, usbhid->ctrl[usbhid->ctrltail].report->type, + urb->transfer_buffer, urb->actual_length, 0); break; case -ESHUTDOWN: /* unplug */ unplug = 1; @@ -1313,76 +369,102 @@ static void hid_ctrl(struct urb *urb) } if (unplug) - hid->ctrltail = hid->ctrlhead; + usbhid->ctrltail = usbhid->ctrlhead; else - hid->ctrltail = (hid->ctrltail + 1) & (HID_CONTROL_FIFO_SIZE - 1); + usbhid->ctrltail = (usbhid->ctrltail + 1) & (HID_CONTROL_FIFO_SIZE - 1); - if (hid->ctrlhead != hid->ctrltail) { + if (usbhid->ctrlhead != usbhid->ctrltail) { if (hid_submit_ctrl(hid)) { - clear_bit(HID_CTRL_RUNNING, &hid->iofl); + clear_bit(HID_CTRL_RUNNING, &usbhid->iofl); wake_up(&hid->wait); } - spin_unlock_irqrestore(&hid->ctrllock, flags); + spin_unlock_irqrestore(&usbhid->ctrllock, flags); return; } - clear_bit(HID_CTRL_RUNNING, &hid->iofl); - spin_unlock_irqrestore(&hid->ctrllock, flags); + clear_bit(HID_CTRL_RUNNING, &usbhid->iofl); + spin_unlock_irqrestore(&usbhid->ctrllock, flags); wake_up(&hid->wait); } -void hid_submit_report(struct hid_device *hid, struct hid_report *report, unsigned char dir) +void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, unsigned char dir) { int head; unsigned long flags; + struct usbhid_device *usbhid = hid->driver_data; if ((hid->quirks & HID_QUIRK_NOGET) && dir == USB_DIR_IN) return; - if (hid->urbout && dir == USB_DIR_OUT && report->type == HID_OUTPUT_REPORT) { + if (usbhid->urbout && dir == USB_DIR_OUT && report->type == HID_OUTPUT_REPORT) { - spin_lock_irqsave(&hid->outlock, flags); + spin_lock_irqsave(&usbhid->outlock, flags); - if ((head = (hid->outhead + 1) & (HID_OUTPUT_FIFO_SIZE - 1)) == hid->outtail) { - spin_unlock_irqrestore(&hid->outlock, flags); + if ((head = (usbhid->outhead + 1) & (HID_OUTPUT_FIFO_SIZE - 1)) == usbhid->outtail) { + spin_unlock_irqrestore(&usbhid->outlock, flags); warn("output queue full"); return; } - hid->out[hid->outhead] = report; - hid->outhead = head; + usbhid->out[usbhid->outhead] = report; + usbhid->outhead = head; - if (!test_and_set_bit(HID_OUT_RUNNING, &hid->iofl)) + if (!test_and_set_bit(HID_OUT_RUNNING, &usbhid->iofl)) if (hid_submit_out(hid)) - clear_bit(HID_OUT_RUNNING, &hid->iofl); + clear_bit(HID_OUT_RUNNING, &usbhid->iofl); - spin_unlock_irqrestore(&hid->outlock, flags); + spin_unlock_irqrestore(&usbhid->outlock, flags); return; } - spin_lock_irqsave(&hid->ctrllock, flags); + spin_lock_irqsave(&usbhid->ctrllock, flags); - if ((head = (hid->ctrlhead + 1) & (HID_CONTROL_FIFO_SIZE - 1)) == hid->ctrltail) { - spin_unlock_irqrestore(&hid->ctrllock, flags); + if ((head = (usbhid->ctrlhead + 1) & (HID_CONTROL_FIFO_SIZE - 1)) == usbhid->ctrltail) { + spin_unlock_irqrestore(&usbhid->ctrllock, flags); warn("control queue full"); return; } - hid->ctrl[hid->ctrlhead].report = report; - hid->ctrl[hid->ctrlhead].dir = dir; - hid->ctrlhead = head; + usbhid->ctrl[usbhid->ctrlhead].report = report; + usbhid->ctrl[usbhid->ctrlhead].dir = dir; + usbhid->ctrlhead = head; - if (!test_and_set_bit(HID_CTRL_RUNNING, &hid->iofl)) + if (!test_and_set_bit(HID_CTRL_RUNNING, &usbhid->iofl)) if (hid_submit_ctrl(hid)) - clear_bit(HID_CTRL_RUNNING, &hid->iofl); + clear_bit(HID_CTRL_RUNNING, &usbhid->iofl); + + spin_unlock_irqrestore(&usbhid->ctrllock, flags); +} + +static int usb_hidinput_input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value) +{ + struct hid_device *hid = dev->private; + struct hid_field *field; + int offset; - spin_unlock_irqrestore(&hid->ctrllock, flags); + if (type == EV_FF) + return input_ff_event(dev, type, code, value); + + if (type != EV_LED) + return -1; + + if ((offset = hidinput_find_field(hid, type, code, &field)) == -1) { + warn("event field not found"); + return -1; + } + + hid_set_field(field, offset, value); + usbhid_submit_report(hid, field->report, USB_DIR_OUT); + + return 0; } -int hid_wait_io(struct hid_device *hid) +int usbhid_wait_io(struct hid_device *hid) { - if (!wait_event_timeout(hid->wait, (!test_bit(HID_CTRL_RUNNING, &hid->iofl) && - !test_bit(HID_OUT_RUNNING, &hid->iofl)), + struct usbhid_device *usbhid = hid->driver_data; + + if (!wait_event_timeout(hid->wait, (!test_bit(HID_CTRL_RUNNING, &usbhid->iofl) && + !test_bit(HID_OUT_RUNNING, &usbhid->iofl)), 10*HZ)) { dbg("timeout waiting for ctrl or out queue to clear"); return -1; @@ -1403,7 +485,7 @@ static int hid_get_class_descriptor(struct usb_device *dev, int ifnum, { int result, retries = 4; - memset(buf,0,size); // Make sure we parse really received data + memset(buf, 0, size); do { result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), @@ -1414,7 +496,7 @@ static int hid_get_class_descriptor(struct usb_device *dev, int ifnum, return result; } -int hid_open(struct hid_device *hid) +int usbhid_open(struct hid_device *hid) { ++hid->open; if (hid_start_in(hid)) @@ -1422,10 +504,12 @@ int hid_open(struct hid_device *hid) return 0; } -void hid_close(struct hid_device *hid) +void usbhid_close(struct hid_device *hid) { + struct usbhid_device *usbhid = hid->driver_data; + if (!--hid->open) - usb_kill_urb(hid->urbin); + usb_kill_urb(usbhid->urbin); } #define USB_VENDOR_ID_PANJIT 0x134c @@ -1437,26 +521,27 @@ void hid_close(struct hid_device *hid) * Initialize all reports */ -void hid_init_reports(struct hid_device *hid) +void usbhid_init_reports(struct hid_device *hid) { struct hid_report *report; + struct usbhid_device *usbhid = hid->driver_data; int err, ret; list_for_each_entry(report, &hid->report_enum[HID_INPUT_REPORT].report_list, list) - hid_submit_report(hid, report, USB_DIR_IN); + usbhid_submit_report(hid, report, USB_DIR_IN); list_for_each_entry(report, &hid->report_enum[HID_FEATURE_REPORT].report_list, list) - hid_submit_report(hid, report, USB_DIR_IN); + usbhid_submit_report(hid, report, USB_DIR_IN); err = 0; - ret = hid_wait_io(hid); + ret = usbhid_wait_io(hid); while (ret) { err |= ret; - if (test_bit(HID_CTRL_RUNNING, &hid->iofl)) - usb_kill_urb(hid->urbctrl); - if (test_bit(HID_OUT_RUNNING, &hid->iofl)) - usb_kill_urb(hid->urbout); - ret = hid_wait_io(hid); + if (test_bit(HID_CTRL_RUNNING, &usbhid->iofl)) + usb_kill_urb(usbhid->urbctrl); + if (test_bit(HID_OUT_RUNNING, &usbhid->iofl)) + usb_kill_urb(usbhid->urbout); + ret = usbhid_wait_io(hid); } if (err) @@ -1464,6 +549,7 @@ void hid_init_reports(struct hid_device *hid) } #define USB_VENDOR_ID_GTCO 0x078c +#define USB_VENDOR_ID_GTCO_IPANEL_2 0x5543 #define USB_DEVICE_ID_GTCO_90 0x0090 #define USB_DEVICE_ID_GTCO_100 0x0100 #define USB_DEVICE_ID_GTCO_101 0x0101 @@ -1509,6 +595,8 @@ void hid_init_reports(struct hid_device *hid) #define USB_DEVICE_ID_GTCO_1004 0x1004 #define USB_DEVICE_ID_GTCO_1005 0x1005 #define USB_DEVICE_ID_GTCO_1006 0x1006 +#define USB_DEVICE_ID_GTCO_8 0x0008 +#define USB_DEVICE_ID_GTCO_d 0x000d #define USB_VENDOR_ID_WACOM 0x056a @@ -1654,6 +742,7 @@ void hid_init_reports(struct hid_device *hid) #define USB_DEVICE_ID_APPLE_GEYSER4_JIS 0x021c #define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY 0x030a #define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY 0x030b +#define USB_DEVICE_ID_APPLE_IR 0x8240 #define USB_VENDOR_ID_CHERRY 0x046a #define USB_DEVICE_ID_CHERRY_CYMOTION 0x0023 @@ -1673,6 +762,15 @@ void hid_init_reports(struct hid_device *hid) #define USB_VENDOR_ID_LOGITECH 0x046d #define USB_DEVICE_ID_LOGITECH_USB_RECEIVER 0xc101 +#define USB_VENDOR_ID_IMATION 0x0718 +#define USB_DEVICE_ID_DISC_STAKKA 0xd000 + +#define USB_VENDOR_ID_PANTHERLORD 0x0810 +#define USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK 0x0001 + +#define USB_VENDOR_ID_SONY 0x054c +#define USB_DEVICE_ID_SONY_PS3_CONTROLLER 0x0268 + /* * Alphabetically sorted blacklist by quirk type. */ @@ -1757,6 +855,9 @@ static const struct hid_blacklist { { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1004, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1005, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1006, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO_IPANEL_2, USB_DEVICE_ID_GTCO_8, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO_IPANEL_2, USB_DEVICE_ID_GTCO_d, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_IMATION, USB_DEVICE_ID_DISC_STAKKA, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY, HID_QUIRK_IGNORE }, @@ -1824,19 +925,21 @@ static const struct hid_blacklist { { USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION, HID_QUIRK_CYMOTION }, - { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI, HID_QUIRK_POWERBOOK_HAS_FN }, - { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO, HID_QUIRK_POWERBOOK_HAS_FN }, - { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI, HID_QUIRK_POWERBOOK_HAS_FN }, - { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_POWERBOOK_ISO_KEYBOARD}, - { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_JIS, HID_QUIRK_POWERBOOK_HAS_FN }, - { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ANSI, HID_QUIRK_POWERBOOK_HAS_FN }, - { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_POWERBOOK_ISO_KEYBOARD}, - { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_JIS, HID_QUIRK_POWERBOOK_HAS_FN }, - { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ANSI, HID_QUIRK_POWERBOOK_HAS_FN }, - { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ISO, HID_QUIRK_POWERBOOK_HAS_FN }, - { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_JIS, HID_QUIRK_POWERBOOK_HAS_FN }, - { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN }, - { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_POWERBOOK_ISO_KEYBOARD}, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_JIS, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ANSI, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_POWERBOOK_ISO_KEYBOARD}, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_JIS, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ANSI, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_POWERBOOK_ISO_KEYBOARD}, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_JIS, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE }, + + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IR, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_PANJIT, 0x0001, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_PANJIT, 0x0002, HID_QUIRK_IGNORE }, @@ -1847,6 +950,10 @@ static const struct hid_blacklist { { USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_USB_RECEIVER, HID_QUIRK_BAD_RELATIVE_KEYS }, + { USB_VENDOR_ID_PANTHERLORD, USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK, HID_QUIRK_MULTI_INPUT | HID_QUIRK_SKIP_OUTPUT_REPORTS }, + + { USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER, HID_QUIRK_SONY_PS3_CONTROLLER }, + { 0, 0 } }; @@ -1869,13 +976,15 @@ static void hid_find_max_report(struct hid_device *hid, unsigned int type, int * static int hid_alloc_buffers(struct usb_device *dev, struct hid_device *hid) { - if (!(hid->inbuf = usb_buffer_alloc(dev, hid->bufsize, GFP_ATOMIC, &hid->inbuf_dma))) + struct usbhid_device *usbhid = hid->driver_data; + + if (!(usbhid->inbuf = usb_buffer_alloc(dev, usbhid->bufsize, GFP_ATOMIC, &usbhid->inbuf_dma))) return -1; - if (!(hid->outbuf = usb_buffer_alloc(dev, hid->bufsize, GFP_ATOMIC, &hid->outbuf_dma))) + if (!(usbhid->outbuf = usb_buffer_alloc(dev, usbhid->bufsize, GFP_ATOMIC, &usbhid->outbuf_dma))) return -1; - if (!(hid->cr = usb_buffer_alloc(dev, sizeof(*(hid->cr)), GFP_ATOMIC, &hid->cr_dma))) + if (!(usbhid->cr = usb_buffer_alloc(dev, sizeof(*(usbhid->cr)), GFP_ATOMIC, &usbhid->cr_dma))) return -1; - if (!(hid->ctrlbuf = usb_buffer_alloc(dev, hid->bufsize, GFP_ATOMIC, &hid->ctrlbuf_dma))) + if (!(usbhid->ctrlbuf = usb_buffer_alloc(dev, usbhid->bufsize, GFP_ATOMIC, &usbhid->ctrlbuf_dma))) return -1; return 0; @@ -1883,14 +992,16 @@ static int hid_alloc_buffers(struct usb_device *dev, struct hid_device *hid) static void hid_free_buffers(struct usb_device *dev, struct hid_device *hid) { - if (hid->inbuf) - usb_buffer_free(dev, hid->bufsize, hid->inbuf, hid->inbuf_dma); - if (hid->outbuf) - usb_buffer_free(dev, hid->bufsize, hid->outbuf, hid->outbuf_dma); - if (hid->cr) - usb_buffer_free(dev, sizeof(*(hid->cr)), hid->cr, hid->cr_dma); - if (hid->ctrlbuf) - usb_buffer_free(dev, hid->bufsize, hid->ctrlbuf, hid->ctrlbuf_dma); + struct usbhid_device *usbhid = hid->driver_data; + + if (usbhid->inbuf) + usb_buffer_free(dev, usbhid->bufsize, usbhid->inbuf, usbhid->inbuf_dma); + if (usbhid->outbuf) + usb_buffer_free(dev, usbhid->bufsize, usbhid->outbuf, usbhid->outbuf_dma); + if (usbhid->cr) + usb_buffer_free(dev, sizeof(*(usbhid->cr)), usbhid->cr, usbhid->cr_dma); + if (usbhid->ctrlbuf) + usb_buffer_free(dev, usbhid->bufsize, usbhid->ctrlbuf, usbhid->ctrlbuf_dma); } /* @@ -1907,6 +1018,32 @@ static void hid_fixup_cymotion_descriptor(char *rdesc, int rsize) } } +/* + * Sending HID_REQ_GET_REPORT changes the operation mode of the ps3 controller + * to "operational". Without this, the ps3 controller will not report any + * events. + */ +static void hid_fixup_sony_ps3_controller(struct usb_device *dev, int ifnum) +{ + int result; + char *buf = kmalloc(18, GFP_KERNEL); + + if (!buf) + return; + + result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + HID_REQ_GET_REPORT, + USB_DIR_IN | USB_TYPE_CLASS | + USB_RECIP_INTERFACE, + (3 << 8) | 0xf2, ifnum, buf, 17, + USB_CTRL_GET_TIMEOUT); + + if (result < 0) + err("%s failed: %d\n", __func__, result); + + kfree(buf); +} + static struct hid_device *usb_hid_configure(struct usb_interface *intf) { struct usb_host_interface *interface = intf->cur_altsetting; @@ -1916,6 +1053,7 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf) unsigned quirks = 0, rsize = 0; char *rdesc; int n, len, insize = 0; + struct usbhid_device *usbhid; /* Ignore all Wacom devices */ if (le16_to_cpu(dev->descriptor.idVendor) == USB_VENDOR_ID_WACOM) @@ -1937,6 +1075,11 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf) if (quirks & HID_QUIRK_IGNORE) return NULL; + if ((quirks & HID_QUIRK_IGNORE_MOUSE) && + (interface->desc.bInterfaceProtocol == USB_INTERFACE_PROTOCOL_MOUSE)) + return NULL; + + if (usb_get_extra_descriptor(interface, HID_DT_HID, &hdesc) && (!interface->desc.bNumEndpoints || usb_get_extra_descriptor(&interface->endpoint[0], HID_DT_HID, &hdesc))) { @@ -1985,13 +1128,19 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf) kfree(rdesc); hid->quirks = quirks; - hid->bufsize = HID_MIN_BUFFER_SIZE; - hid_find_max_report(hid, HID_INPUT_REPORT, &hid->bufsize); - hid_find_max_report(hid, HID_OUTPUT_REPORT, &hid->bufsize); - hid_find_max_report(hid, HID_FEATURE_REPORT, &hid->bufsize); + if (!(usbhid = kzalloc(sizeof(struct usbhid_device), GFP_KERNEL))) + goto fail; + + hid->driver_data = usbhid; + usbhid->hid = hid; + + usbhid->bufsize = HID_MIN_BUFFER_SIZE; + hid_find_max_report(hid, HID_INPUT_REPORT, &usbhid->bufsize); + hid_find_max_report(hid, HID_OUTPUT_REPORT, &usbhid->bufsize); + hid_find_max_report(hid, HID_FEATURE_REPORT, &usbhid->bufsize); - if (hid->bufsize > HID_MAX_BUFFER_SIZE) - hid->bufsize = HID_MAX_BUFFER_SIZE; + if (usbhid->bufsize > HID_MAX_BUFFER_SIZE) + usbhid->bufsize = HID_MAX_BUFFER_SIZE; hid_find_max_report(hid, HID_INPUT_REPORT, &insize); @@ -2020,47 +1169,47 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf) interval = hid_mousepoll_interval; if (usb_endpoint_dir_in(endpoint)) { - if (hid->urbin) + if (usbhid->urbin) continue; - if (!(hid->urbin = usb_alloc_urb(0, GFP_KERNEL))) + if (!(usbhid->urbin = usb_alloc_urb(0, GFP_KERNEL))) goto fail; pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress); - usb_fill_int_urb(hid->urbin, dev, pipe, hid->inbuf, insize, + usb_fill_int_urb(usbhid->urbin, dev, pipe, usbhid->inbuf, insize, hid_irq_in, hid, interval); - hid->urbin->transfer_dma = hid->inbuf_dma; - hid->urbin->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + usbhid->urbin->transfer_dma = usbhid->inbuf_dma; + usbhid->urbin->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; } else { - if (hid->urbout) + if (usbhid->urbout) continue; - if (!(hid->urbout = usb_alloc_urb(0, GFP_KERNEL))) + if (!(usbhid->urbout = usb_alloc_urb(0, GFP_KERNEL))) goto fail; pipe = usb_sndintpipe(dev, endpoint->bEndpointAddress); - usb_fill_int_urb(hid->urbout, dev, pipe, hid->outbuf, 0, + usb_fill_int_urb(usbhid->urbout, dev, pipe, usbhid->outbuf, 0, hid_irq_out, hid, interval); - hid->urbout->transfer_dma = hid->outbuf_dma; - hid->urbout->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + usbhid->urbout->transfer_dma = usbhid->outbuf_dma; + usbhid->urbout->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; } } - if (!hid->urbin) { + if (!usbhid->urbin) { err("couldn't find an input interrupt endpoint"); goto fail; } init_waitqueue_head(&hid->wait); - INIT_WORK(&hid->reset_work, hid_reset); - setup_timer(&hid->io_retry, hid_retry_timeout, (unsigned long) hid); + INIT_WORK(&usbhid->reset_work, hid_reset); + setup_timer(&usbhid->io_retry, hid_retry_timeout, (unsigned long) hid); - spin_lock_init(&hid->inlock); - spin_lock_init(&hid->outlock); - spin_lock_init(&hid->ctrllock); + spin_lock_init(&usbhid->inlock); + spin_lock_init(&usbhid->outlock); + spin_lock_init(&usbhid->ctrllock); hid->version = le16_to_cpu(hdesc->bcdHID); hid->country = hdesc->bCountryCode; - hid->dev = dev; - hid->intf = intf; - hid->ifnum = interface->desc.bInterfaceNumber; + hid->dev = &intf->dev; + usbhid->intf = intf; + usbhid->ifnum = interface->desc.bInterfaceNumber; hid->name[0] = 0; @@ -2078,6 +1227,10 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf) le16_to_cpu(dev->descriptor.idVendor), le16_to_cpu(dev->descriptor.idProduct)); + hid->bus = BUS_USB; + hid->vendor = dev->descriptor.idVendor; + hid->product = dev->descriptor.idProduct; + usb_make_path(dev, hid->phys, sizeof(hid->phys)); strlcat(hid->phys, "/input", sizeof(hid->phys)); len = strlen(hid->phys); @@ -2088,22 +1241,28 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf) if (usb_string(dev, dev->descriptor.iSerialNumber, hid->uniq, 64) <= 0) hid->uniq[0] = 0; - hid->urbctrl = usb_alloc_urb(0, GFP_KERNEL); - if (!hid->urbctrl) + usbhid->urbctrl = usb_alloc_urb(0, GFP_KERNEL); + if (!usbhid->urbctrl) goto fail; - usb_fill_control_urb(hid->urbctrl, dev, 0, (void *) hid->cr, - hid->ctrlbuf, 1, hid_ctrl, hid); - hid->urbctrl->setup_dma = hid->cr_dma; - hid->urbctrl->transfer_dma = hid->ctrlbuf_dma; - hid->urbctrl->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP); - + usb_fill_control_urb(usbhid->urbctrl, dev, 0, (void *) usbhid->cr, + usbhid->ctrlbuf, 1, hid_ctrl, hid); + usbhid->urbctrl->setup_dma = usbhid->cr_dma; + usbhid->urbctrl->transfer_dma = usbhid->ctrlbuf_dma; + usbhid->urbctrl->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP); + hid->hidinput_input_event = usb_hidinput_input_event; + hid->hid_open = usbhid_open; + hid->hid_close = usbhid_close; +#ifdef CONFIG_USB_HIDDEV + hid->hiddev_hid_event = hiddev_hid_event; + hid->hiddev_report_event = hiddev_report_event; +#endif return hid; fail: - usb_free_urb(hid->urbin); - usb_free_urb(hid->urbout); - usb_free_urb(hid->urbctrl); + usb_free_urb(usbhid->urbin); + usb_free_urb(usbhid->urbout); + usb_free_urb(usbhid->urbctrl); hid_free_buffers(dev, hid); hid_free_device(hid); @@ -2113,18 +1272,21 @@ fail: static void hid_disconnect(struct usb_interface *intf) { struct hid_device *hid = usb_get_intfdata (intf); + struct usbhid_device *usbhid; if (!hid) return; - spin_lock_irq(&hid->inlock); /* Sync with error handler */ + usbhid = hid->driver_data; + + spin_lock_irq(&usbhid->inlock); /* Sync with error handler */ usb_set_intfdata(intf, NULL); - spin_unlock_irq(&hid->inlock); - usb_kill_urb(hid->urbin); - usb_kill_urb(hid->urbout); - usb_kill_urb(hid->urbctrl); + spin_unlock_irq(&usbhid->inlock); + usb_kill_urb(usbhid->urbin); + usb_kill_urb(usbhid->urbout); + usb_kill_urb(usbhid->urbctrl); - del_timer_sync(&hid->io_retry); + del_timer_sync(&usbhid->io_retry); flush_scheduled_work(); if (hid->claimed & HID_CLAIMED_INPUT) @@ -2132,11 +1294,11 @@ static void hid_disconnect(struct usb_interface *intf) if (hid->claimed & HID_CLAIMED_HIDDEV) hiddev_disconnect(hid); - usb_free_urb(hid->urbin); - usb_free_urb(hid->urbctrl); - usb_free_urb(hid->urbout); + usb_free_urb(usbhid->urbin); + usb_free_urb(usbhid->urbctrl); + usb_free_urb(usbhid->urbout); - hid_free_buffers(hid->dev, hid); + hid_free_buffers(hid_to_usb_dev(hid), hid); hid_free_device(hid); } @@ -2153,7 +1315,7 @@ static int hid_probe(struct usb_interface *intf, const struct usb_device_id *id) if (!(hid = usb_hid_configure(intf))) return -ENODEV; - hid_init_reports(hid); + usbhid_init_reports(hid); hid_dump_device(hid); if (!hidinput_connect(hid)) @@ -2169,6 +1331,13 @@ static int hid_probe(struct usb_interface *intf, const struct usb_device_id *id) return -ENODEV; } + if ((hid->claimed & HID_CLAIMED_INPUT)) + hid_ff_init(hid); + + if (hid->quirks & HID_QUIRK_SONY_PS3_CONTROLLER) + hid_fixup_sony_ps3_controller(interface_to_usbdev(intf), + intf->cur_altsetting->desc.bInterfaceNumber); + printk(KERN_INFO); if (hid->claimed & HID_CLAIMED_INPUT) @@ -2199,12 +1368,13 @@ static int hid_probe(struct usb_interface *intf, const struct usb_device_id *id) static int hid_suspend(struct usb_interface *intf, pm_message_t message) { struct hid_device *hid = usb_get_intfdata (intf); + struct usbhid_device *usbhid = hid->driver_data; - spin_lock_irq(&hid->inlock); /* Sync with error handler */ - set_bit(HID_SUSPENDED, &hid->iofl); - spin_unlock_irq(&hid->inlock); - del_timer(&hid->io_retry); - usb_kill_urb(hid->urbin); + spin_lock_irq(&usbhid->inlock); /* Sync with error handler */ + set_bit(HID_SUSPENDED, &usbhid->iofl); + spin_unlock_irq(&usbhid->inlock); + del_timer(&usbhid->io_retry); + usb_kill_urb(usbhid->urbin); dev_dbg(&intf->dev, "suspend\n"); return 0; } @@ -2212,10 +1382,11 @@ static int hid_suspend(struct usb_interface *intf, pm_message_t message) static int hid_resume(struct usb_interface *intf) { struct hid_device *hid = usb_get_intfdata (intf); + struct usbhid_device *usbhid = hid->driver_data; int status; - clear_bit(HID_SUSPENDED, &hid->iofl); - hid->retry_delay = 0; + clear_bit(HID_SUSPENDED, &usbhid->iofl); + usbhid->retry_delay = 0; status = hid_start_in(hid); dev_dbg(&intf->dev, "resume status %d\n", status); return status; diff --git a/drivers/usb/input/hid-debug.h b/drivers/usb/input/hid-debug.h deleted file mode 100644 index f04d6d75c09..00000000000 --- a/drivers/usb/input/hid-debug.h +++ /dev/null @@ -1,757 +0,0 @@ -/* - * $Id: hid-debug.h,v 1.8 2001/09/25 09:37:57 vojtech Exp $ - * - * (c) 1999 Andreas Gal <gal@cs.uni-magdeburg.de> - * (c) 2000-2001 Vojtech Pavlik <vojtech@ucw.cz> - * - * Some debug stuff for the HID parser. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Should you need to contact me, the author, you can do so either by - * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail: - * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic - */ - -#include <linux/input.h> - -struct hid_usage_entry { - unsigned page; - unsigned usage; - char *description; -}; - -static const struct hid_usage_entry hid_usage_table[] = { - { 0, 0, "Undefined" }, - { 1, 0, "GenericDesktop" }, - {0, 0x01, "Pointer"}, - {0, 0x02, "Mouse"}, - {0, 0x04, "Joystick"}, - {0, 0x05, "GamePad"}, - {0, 0x06, "Keyboard"}, - {0, 0x07, "Keypad"}, - {0, 0x08, "MultiAxis"}, - {0, 0x30, "X"}, - {0, 0x31, "Y"}, - {0, 0x32, "Z"}, - {0, 0x33, "Rx"}, - {0, 0x34, "Ry"}, - {0, 0x35, "Rz"}, - {0, 0x36, "Slider"}, - {0, 0x37, "Dial"}, - {0, 0x38, "Wheel"}, - {0, 0x39, "HatSwitch"}, - {0, 0x3a, "CountedBuffer"}, - {0, 0x3b, "ByteCount"}, - {0, 0x3c, "MotionWakeup"}, - {0, 0x3d, "Start"}, - {0, 0x3e, "Select"}, - {0, 0x40, "Vx"}, - {0, 0x41, "Vy"}, - {0, 0x42, "Vz"}, - {0, 0x43, "Vbrx"}, - {0, 0x44, "Vbry"}, - {0, 0x45, "Vbrz"}, - {0, 0x46, "Vno"}, - {0, 0x80, "SystemControl"}, - {0, 0x81, "SystemPowerDown"}, - {0, 0x82, "SystemSleep"}, - {0, 0x83, "SystemWakeUp"}, - {0, 0x84, "SystemContextMenu"}, - {0, 0x85, "SystemMainMenu"}, - {0, 0x86, "SystemAppMenu"}, - {0, 0x87, "SystemMenuHelp"}, - {0, 0x88, "SystemMenuExit"}, - {0, 0x89, "SystemMenuSelect"}, - {0, 0x8a, "SystemMenuRight"}, - {0, 0x8b, "SystemMenuLeft"}, - {0, 0x8c, "SystemMenuUp"}, - {0, 0x8d, "SystemMenuDown"}, - {0, 0x90, "D-PadUp"}, - {0, 0x91, "D-PadDown"}, - {0, 0x92, "D-PadRight"}, - {0, 0x93, "D-PadLeft"}, - { 2, 0, "Simulation" }, - {0, 0xb0, "Aileron"}, - {0, 0xb1, "AileronTrim"}, - {0, 0xb2, "Anti-Torque"}, - {0, 0xb3, "Autopilot"}, - {0, 0xb4, "Chaff"}, - {0, 0xb5, "Collective"}, - {0, 0xb6, "DiveBrake"}, - {0, 0xb7, "ElectronicCountermeasures"}, - {0, 0xb8, "Elevator"}, - {0, 0xb9, "ElevatorTrim"}, - {0, 0xba, "Rudder"}, - {0, 0xbb, "Throttle"}, - {0, 0xbc, "FlightCommunications"}, - {0, 0xbd, "FlareRelease"}, - {0, 0xbe, "LandingGear"}, - {0, 0xbf, "ToeBrake"}, - { 7, 0, "Keyboard" }, - { 8, 0, "LED" }, - {0, 0x01, "NumLock"}, - {0, 0x02, "CapsLock"}, - {0, 0x03, "ScrollLock"}, - {0, 0x04, "Compose"}, - {0, 0x05, "Kana"}, - {0, 0x4b, "GenericIndicator"}, - { 9, 0, "Button" }, - { 10, 0, "Ordinal" }, - { 12, 0, "Consumer" }, - {0, 0x238, "HorizontalWheel"}, - { 13, 0, "Digitizers" }, - {0, 0x01, "Digitizer"}, - {0, 0x02, "Pen"}, - {0, 0x03, "LightPen"}, - {0, 0x04, "TouchScreen"}, - {0, 0x05, "TouchPad"}, - {0, 0x20, "Stylus"}, - {0, 0x21, "Puck"}, - {0, 0x22, "Finger"}, - {0, 0x30, "TipPressure"}, - {0, 0x31, "BarrelPressure"}, - {0, 0x32, "InRange"}, - {0, 0x33, "Touch"}, - {0, 0x34, "UnTouch"}, - {0, 0x35, "Tap"}, - {0, 0x39, "TabletFunctionKey"}, - {0, 0x3a, "ProgramChangeKey"}, - {0, 0x3c, "Invert"}, - {0, 0x42, "TipSwitch"}, - {0, 0x43, "SecondaryTipSwitch"}, - {0, 0x44, "BarrelSwitch"}, - {0, 0x45, "Eraser"}, - {0, 0x46, "TabletPick"}, - { 15, 0, "PhysicalInterfaceDevice" }, - {0, 0x00, "Undefined"}, - {0, 0x01, "Physical_Interface_Device"}, - {0, 0x20, "Normal"}, - {0, 0x21, "Set_Effect_Report"}, - {0, 0x22, "Effect_Block_Index"}, - {0, 0x23, "Parameter_Block_Offset"}, - {0, 0x24, "ROM_Flag"}, - {0, 0x25, "Effect_Type"}, - {0, 0x26, "ET_Constant_Force"}, - {0, 0x27, "ET_Ramp"}, - {0, 0x28, "ET_Custom_Force_Data"}, - {0, 0x30, "ET_Square"}, - {0, 0x31, "ET_Sine"}, - {0, 0x32, "ET_Triangle"}, - {0, 0x33, "ET_Sawtooth_Up"}, - {0, 0x34, "ET_Sawtooth_Down"}, - {0, 0x40, "ET_Spring"}, - {0, 0x41, "ET_Damper"}, - {0, 0x42, "ET_Inertia"}, - {0, 0x43, "ET_Friction"}, - {0, 0x50, "Duration"}, - {0, 0x51, "Sample_Period"}, - {0, 0x52, "Gain"}, - {0, 0x53, "Trigger_Button"}, - {0, 0x54, "Trigger_Repeat_Interval"}, - {0, 0x55, "Axes_Enable"}, - {0, 0x56, "Direction_Enable"}, - {0, 0x57, "Direction"}, - {0, 0x58, "Type_Specific_Block_Offset"}, - {0, 0x59, "Block_Type"}, - {0, 0x5A, "Set_Envelope_Report"}, - {0, 0x5B, "Attack_Level"}, - {0, 0x5C, "Attack_Time"}, - {0, 0x5D, "Fade_Level"}, - {0, 0x5E, "Fade_Time"}, - {0, 0x5F, "Set_Condition_Report"}, - {0, 0x60, "CP_Offset"}, - {0, 0x61, "Positive_Coefficient"}, - {0, 0x62, "Negative_Coefficient"}, - {0, 0x63, "Positive_Saturation"}, - {0, 0x64, "Negative_Saturation"}, - {0, 0x65, "Dead_Band"}, - {0, 0x66, "Download_Force_Sample"}, - {0, 0x67, "Isoch_Custom_Force_Enable"}, - {0, 0x68, "Custom_Force_Data_Report"}, - {0, 0x69, "Custom_Force_Data"}, - {0, 0x6A, "Custom_Force_Vendor_Defined_Data"}, - {0, 0x6B, "Set_Custom_Force_Report"}, - {0, 0x6C, "Custom_Force_Data_Offset"}, - {0, 0x6D, "Sample_Count"}, - {0, 0x6E, "Set_Periodic_Report"}, - {0, 0x6F, "Offset"}, - {0, 0x70, "Magnitude"}, - {0, 0x71, "Phase"}, - {0, 0x72, "Period"}, - {0, 0x73, "Set_Constant_Force_Report"}, - {0, 0x74, "Set_Ramp_Force_Report"}, - {0, 0x75, "Ramp_Start"}, - {0, 0x76, "Ramp_End"}, - {0, 0x77, "Effect_Operation_Report"}, - {0, 0x78, "Effect_Operation"}, - {0, 0x79, "Op_Effect_Start"}, - {0, 0x7A, "Op_Effect_Start_Solo"}, - {0, 0x7B, "Op_Effect_Stop"}, - {0, 0x7C, "Loop_Count"}, - {0, 0x7D, "Device_Gain_Report"}, - {0, 0x7E, "Device_Gain"}, - {0, 0x7F, "PID_Pool_Report"}, - {0, 0x80, "RAM_Pool_Size"}, - {0, 0x81, "ROM_Pool_Size"}, - {0, 0x82, "ROM_Effect_Block_Count"}, - {0, 0x83, "Simultaneous_Effects_Max"}, - {0, 0x84, "Pool_Alignment"}, - {0, 0x85, "PID_Pool_Move_Report"}, - {0, 0x86, "Move_Source"}, - {0, 0x87, "Move_Destination"}, - {0, 0x88, "Move_Length"}, - {0, 0x89, "PID_Block_Load_Report"}, - {0, 0x8B, "Block_Load_Status"}, - {0, 0x8C, "Block_Load_Success"}, - {0, 0x8D, "Block_Load_Full"}, - {0, 0x8E, "Block_Load_Error"}, - {0, 0x8F, "Block_Handle"}, - {0, 0x90, "PID_Block_Free_Report"}, - {0, 0x91, "Type_Specific_Block_Handle"}, - {0, 0x92, "PID_State_Report"}, - {0, 0x94, "Effect_Playing"}, - {0, 0x95, "PID_Device_Control_Report"}, - {0, 0x96, "PID_Device_Control"}, - {0, 0x97, "DC_Enable_Actuators"}, - {0, 0x98, "DC_Disable_Actuators"}, - {0, 0x99, "DC_Stop_All_Effects"}, - {0, 0x9A, "DC_Device_Reset"}, - {0, 0x9B, "DC_Device_Pause"}, - {0, 0x9C, "DC_Device_Continue"}, - {0, 0x9F, "Device_Paused"}, - {0, 0xA0, "Actuators_Enabled"}, - {0, 0xA4, "Safety_Switch"}, - {0, 0xA5, "Actuator_Override_Switch"}, - {0, 0xA6, "Actuator_Power"}, - {0, 0xA7, "Start_Delay"}, - {0, 0xA8, "Parameter_Block_Size"}, - {0, 0xA9, "Device_Managed_Pool"}, - {0, 0xAA, "Shared_Parameter_Blocks"}, - {0, 0xAB, "Create_New_Effect_Report"}, - {0, 0xAC, "RAM_Pool_Available"}, - { 0x84, 0, "Power Device" }, - { 0x84, 0x02, "PresentStatus" }, - { 0x84, 0x03, "ChangeStatus" }, - { 0x84, 0x04, "UPS" }, - { 0x84, 0x05, "PowerSupply" }, - { 0x84, 0x10, "BatterySystem" }, - { 0x84, 0x11, "BatterySystemID" }, - { 0x84, 0x12, "Battery" }, - { 0x84, 0x13, "BatteryID" }, - { 0x84, 0x14, "Charger" }, - { 0x84, 0x15, "ChargerID" }, - { 0x84, 0x16, "PowerConverter" }, - { 0x84, 0x17, "PowerConverterID" }, - { 0x84, 0x18, "OutletSystem" }, - { 0x84, 0x19, "OutletSystemID" }, - { 0x84, 0x1a, "Input" }, - { 0x84, 0x1b, "InputID" }, - { 0x84, 0x1c, "Output" }, - { 0x84, 0x1d, "OutputID" }, - { 0x84, 0x1e, "Flow" }, - { 0x84, 0x1f, "FlowID" }, - { 0x84, 0x20, "Outlet" }, - { 0x84, 0x21, "OutletID" }, - { 0x84, 0x22, "Gang" }, - { 0x84, 0x24, "PowerSummary" }, - { 0x84, 0x25, "PowerSummaryID" }, - { 0x84, 0x30, "Voltage" }, - { 0x84, 0x31, "Current" }, - { 0x84, 0x32, "Frequency" }, - { 0x84, 0x33, "ApparentPower" }, - { 0x84, 0x35, "PercentLoad" }, - { 0x84, 0x40, "ConfigVoltage" }, - { 0x84, 0x41, "ConfigCurrent" }, - { 0x84, 0x43, "ConfigApparentPower" }, - { 0x84, 0x53, "LowVoltageTransfer" }, - { 0x84, 0x54, "HighVoltageTransfer" }, - { 0x84, 0x56, "DelayBeforeStartup" }, - { 0x84, 0x57, "DelayBeforeShutdown" }, - { 0x84, 0x58, "Test" }, - { 0x84, 0x5a, "AudibleAlarmControl" }, - { 0x84, 0x60, "Present" }, - { 0x84, 0x61, "Good" }, - { 0x84, 0x62, "InternalFailure" }, - { 0x84, 0x65, "Overload" }, - { 0x84, 0x66, "OverCharged" }, - { 0x84, 0x67, "OverTemperature" }, - { 0x84, 0x68, "ShutdownRequested" }, - { 0x84, 0x69, "ShutdownImminent" }, - { 0x84, 0x6b, "SwitchOn/Off" }, - { 0x84, 0x6c, "Switchable" }, - { 0x84, 0x6d, "Used" }, - { 0x84, 0x6e, "Boost" }, - { 0x84, 0x73, "CommunicationLost" }, - { 0x84, 0xfd, "iManufacturer" }, - { 0x84, 0xfe, "iProduct" }, - { 0x84, 0xff, "iSerialNumber" }, - { 0x85, 0, "Battery System" }, - { 0x85, 0x01, "SMBBatteryMode" }, - { 0x85, 0x02, "SMBBatteryStatus" }, - { 0x85, 0x03, "SMBAlarmWarning" }, - { 0x85, 0x04, "SMBChargerMode" }, - { 0x85, 0x05, "SMBChargerStatus" }, - { 0x85, 0x06, "SMBChargerSpecInfo" }, - { 0x85, 0x07, "SMBSelectorState" }, - { 0x85, 0x08, "SMBSelectorPresets" }, - { 0x85, 0x09, "SMBSelectorInfo" }, - { 0x85, 0x29, "RemainingCapacityLimit" }, - { 0x85, 0x2c, "CapacityMode" }, - { 0x85, 0x42, "BelowRemainingCapacityLimit" }, - { 0x85, 0x44, "Charging" }, - { 0x85, 0x45, "Discharging" }, - { 0x85, 0x4b, "NeedReplacement" }, - { 0x85, 0x66, "RemainingCapacity" }, - { 0x85, 0x68, "RunTimeToEmpty" }, - { 0x85, 0x6a, "AverageTimeToFull" }, - { 0x85, 0x83, "DesignCapacity" }, - { 0x85, 0x85, "ManufacturerDate" }, - { 0x85, 0x89, "iDeviceChemistry" }, - { 0x85, 0x8b, "Rechargable" }, - { 0x85, 0x8f, "iOEMInformation" }, - { 0x85, 0x8d, "CapacityGranularity1" }, - { 0x85, 0xd0, "ACPresent" }, - /* pages 0xff00 to 0xffff are vendor-specific */ - { 0xffff, 0, "Vendor-specific-FF" }, - { 0, 0, NULL } -}; - -static void resolv_usage_page(unsigned page) { - const struct hid_usage_entry *p; - - for (p = hid_usage_table; p->description; p++) - if (p->page == page) { - printk("%s", p->description); - return; - } - printk("%04x", page); -} - -static void resolv_usage(unsigned usage) { - const struct hid_usage_entry *p; - - resolv_usage_page(usage >> 16); - printk("."); - for (p = hid_usage_table; p->description; p++) - if (p->page == (usage >> 16)) { - for(++p; p->description && p->usage != 0; p++) - if (p->usage == (usage & 0xffff)) { - printk("%s", p->description); - return; - } - break; - } - printk("%04x", usage & 0xffff); -} - -__inline__ static void tab(int n) { - while (n--) printk(" "); -} - -static void hid_dump_field(struct hid_field *field, int n) { - int j; - - if (field->physical) { - tab(n); - printk("Physical("); - resolv_usage(field->physical); printk(")\n"); - } - if (field->logical) { - tab(n); - printk("Logical("); - resolv_usage(field->logical); printk(")\n"); - } - tab(n); printk("Usage(%d)\n", field->maxusage); - for (j = 0; j < field->maxusage; j++) { - tab(n+2);resolv_usage(field->usage[j].hid); printk("\n"); - } - if (field->logical_minimum != field->logical_maximum) { - tab(n); printk("Logical Minimum(%d)\n", field->logical_minimum); - tab(n); printk("Logical Maximum(%d)\n", field->logical_maximum); - } - if (field->physical_minimum != field->physical_maximum) { - tab(n); printk("Physical Minimum(%d)\n", field->physical_minimum); - tab(n); printk("Physical Maximum(%d)\n", field->physical_maximum); - } - if (field->unit_exponent) { - tab(n); printk("Unit Exponent(%d)\n", field->unit_exponent); - } - if (field->unit) { - char *systems[5] = { "None", "SI Linear", "SI Rotation", "English Linear", "English Rotation" }; - char *units[5][8] = { - { "None", "None", "None", "None", "None", "None", "None", "None" }, - { "None", "Centimeter", "Gram", "Seconds", "Kelvin", "Ampere", "Candela", "None" }, - { "None", "Radians", "Gram", "Seconds", "Kelvin", "Ampere", "Candela", "None" }, - { "None", "Inch", "Slug", "Seconds", "Fahrenheit", "Ampere", "Candela", "None" }, - { "None", "Degrees", "Slug", "Seconds", "Fahrenheit", "Ampere", "Candela", "None" } - }; - - int i; - int sys; - __u32 data = field->unit; - - /* First nibble tells us which system we're in. */ - sys = data & 0xf; - data >>= 4; - - if(sys > 4) { - tab(n); printk("Unit(Invalid)\n"); - } - else { - int earlier_unit = 0; - - tab(n); printk("Unit(%s : ", systems[sys]); - - for (i=1 ; i<sizeof(__u32)*2 ; i++) { - char nibble = data & 0xf; - data >>= 4; - if (nibble != 0) { - if(earlier_unit++ > 0) - printk("*"); - printk("%s", units[sys][i]); - if(nibble != 1) { - /* This is a _signed_ nibble(!) */ - - int val = nibble & 0x7; - if(nibble & 0x08) - val = -((0x7 & ~val) +1); - printk("^%d", val); - } - } - } - printk(")\n"); - } - } - tab(n); printk("Report Size(%u)\n", field->report_size); - tab(n); printk("Report Count(%u)\n", field->report_count); - tab(n); printk("Report Offset(%u)\n", field->report_offset); - - tab(n); printk("Flags( "); - j = field->flags; - printk("%s", HID_MAIN_ITEM_CONSTANT & j ? "Constant " : ""); - printk("%s", HID_MAIN_ITEM_VARIABLE & j ? "Variable " : "Array "); - printk("%s", HID_MAIN_ITEM_RELATIVE & j ? "Relative " : "Absolute "); - printk("%s", HID_MAIN_ITEM_WRAP & j ? "Wrap " : ""); - printk("%s", HID_MAIN_ITEM_NONLINEAR & j ? "NonLinear " : ""); - printk("%s", HID_MAIN_ITEM_NO_PREFERRED & j ? "NoPrefferedState " : ""); - printk("%s", HID_MAIN_ITEM_NULL_STATE & j ? "NullState " : ""); - printk("%s", HID_MAIN_ITEM_VOLATILE & j ? "Volatile " : ""); - printk("%s", HID_MAIN_ITEM_BUFFERED_BYTE & j ? "BufferedByte " : ""); - printk(")\n"); -} - -static void __attribute__((unused)) hid_dump_device(struct hid_device *device) { - struct hid_report_enum *report_enum; - struct hid_report *report; - struct list_head *list; - unsigned i,k; - static char *table[] = {"INPUT", "OUTPUT", "FEATURE"}; - - for (i = 0; i < HID_REPORT_TYPES; i++) { - report_enum = device->report_enum + i; - list = report_enum->report_list.next; - while (list != &report_enum->report_list) { - report = (struct hid_report *) list; - tab(2); - printk("%s", table[i]); - if (report->id) - printk("(%d)", report->id); - printk("[%s]", table[report->type]); - printk("\n"); - for (k = 0; k < report->maxfield; k++) { - tab(4); - printk("Field(%d)\n", k); - hid_dump_field(report->field[k], 6); - } - list = list->next; - } - } -} - -static void __attribute__((unused)) hid_dump_input(struct hid_usage *usage, __s32 value) { - printk("hid-debug: input "); - resolv_usage(usage->hid); - printk(" = %d\n", value); -} - - -static char *events[EV_MAX + 1] = { - [EV_SYN] = "Sync", [EV_KEY] = "Key", - [EV_REL] = "Relative", [EV_ABS] = "Absolute", - [EV_MSC] = "Misc", [EV_LED] = "LED", - [EV_SND] = "Sound", [EV_REP] = "Repeat", - [EV_FF] = "ForceFeedback", [EV_PWR] = "Power", - [EV_FF_STATUS] = "ForceFeedbackStatus", -}; - -static char *syncs[2] = { - [SYN_REPORT] = "Report", [SYN_CONFIG] = "Config", -}; -static char *keys[KEY_MAX + 1] = { - [KEY_RESERVED] = "Reserved", [KEY_ESC] = "Esc", - [KEY_1] = "1", [KEY_2] = "2", - [KEY_3] = "3", [KEY_4] = "4", - [KEY_5] = "5", [KEY_6] = "6", - [KEY_7] = "7", [KEY_8] = "8", - [KEY_9] = "9", [KEY_0] = "0", - [KEY_MINUS] = "Minus", [KEY_EQUAL] = "Equal", - [KEY_BACKSPACE] = "Backspace", [KEY_TAB] = "Tab", - [KEY_Q] = "Q", [KEY_W] = "W", - [KEY_E] = "E", [KEY_R] = "R", - [KEY_T] = "T", [KEY_Y] = "Y", - [KEY_U] = "U", [KEY_I] = "I", - [KEY_O] = "O", [KEY_P] = "P", - [KEY_LEFTBRACE] = "LeftBrace", [KEY_RIGHTBRACE] = "RightBrace", - [KEY_ENTER] = "Enter", [KEY_LEFTCTRL] = "LeftControl", - [KEY_A] = "A", [KEY_S] = "S", - [KEY_D] = "D", [KEY_F] = "F", - [KEY_G] = "G", [KEY_H] = "H", - [KEY_J] = "J", [KEY_K] = "K", - [KEY_L] = "L", [KEY_SEMICOLON] = "Semicolon", - [KEY_APOSTROPHE] = "Apostrophe", [KEY_GRAVE] = "Grave", - [KEY_LEFTSHIFT] = "LeftShift", [KEY_BACKSLASH] = "BackSlash", - [KEY_Z] = "Z", [KEY_X] = "X", - [KEY_C] = "C", [KEY_V] = "V", - [KEY_B] = "B", [KEY_N] = "N", - [KEY_M] = "M", [KEY_COMMA] = "Comma", - [KEY_DOT] = "Dot", [KEY_SLASH] = "Slash", - [KEY_RIGHTSHIFT] = "RightShift", [KEY_KPASTERISK] = "KPAsterisk", - [KEY_LEFTALT] = "LeftAlt", [KEY_SPACE] = "Space", - [KEY_CAPSLOCK] = "CapsLock", [KEY_F1] = "F1", - [KEY_F2] = "F2", [KEY_F3] = "F3", - [KEY_F4] = "F4", [KEY_F5] = "F5", - [KEY_F6] = "F6", [KEY_F7] = "F7", - [KEY_F8] = "F8", [KEY_F9] = "F9", - [KEY_F10] = "F10", [KEY_NUMLOCK] = "NumLock", - [KEY_SCROLLLOCK] = "ScrollLock", [KEY_KP7] = "KP7", - [KEY_KP8] = "KP8", [KEY_KP9] = "KP9", - [KEY_KPMINUS] = "KPMinus", [KEY_KP4] = "KP4", - [KEY_KP5] = "KP5", [KEY_KP6] = "KP6", - [KEY_KPPLUS] = "KPPlus", [KEY_KP1] = "KP1", - [KEY_KP2] = "KP2", [KEY_KP3] = "KP3", - [KEY_KP0] = "KP0", [KEY_KPDOT] = "KPDot", - [KEY_ZENKAKUHANKAKU] = "Zenkaku/Hankaku", [KEY_102ND] = "102nd", - [KEY_F11] = "F11", [KEY_F12] = "F12", - [KEY_RO] = "RO", [KEY_KATAKANA] = "Katakana", - [KEY_HIRAGANA] = "HIRAGANA", [KEY_HENKAN] = "Henkan", - [KEY_KATAKANAHIRAGANA] = "Katakana/Hiragana", [KEY_MUHENKAN] = "Muhenkan", - [KEY_KPJPCOMMA] = "KPJpComma", [KEY_KPENTER] = "KPEnter", - [KEY_RIGHTCTRL] = "RightCtrl", [KEY_KPSLASH] = "KPSlash", - [KEY_SYSRQ] = "SysRq", [KEY_RIGHTALT] = "RightAlt", - [KEY_LINEFEED] = "LineFeed", [KEY_HOME] = "Home", - [KEY_UP] = "Up", [KEY_PAGEUP] = "PageUp", - [KEY_LEFT] = "Left", [KEY_RIGHT] = "Right", - [KEY_END] = "End", [KEY_DOWN] = "Down", - [KEY_PAGEDOWN] = "PageDown", [KEY_INSERT] = "Insert", - [KEY_DELETE] = "Delete", [KEY_MACRO] = "Macro", - [KEY_MUTE] = "Mute", [KEY_VOLUMEDOWN] = "VolumeDown", - [KEY_VOLUMEUP] = "VolumeUp", [KEY_POWER] = "Power", - [KEY_KPEQUAL] = "KPEqual", [KEY_KPPLUSMINUS] = "KPPlusMinus", - [KEY_PAUSE] = "Pause", [KEY_KPCOMMA] = "KPComma", - [KEY_HANGUEL] = "Hangeul", [KEY_HANJA] = "Hanja", - [KEY_YEN] = "Yen", [KEY_LEFTMETA] = "LeftMeta", - [KEY_RIGHTMETA] = "RightMeta", [KEY_COMPOSE] = "Compose", - [KEY_STOP] = "Stop", [KEY_AGAIN] = "Again", - [KEY_PROPS] = "Props", [KEY_UNDO] = "Undo", - [KEY_FRONT] = "Front", [KEY_COPY] = "Copy", - [KEY_OPEN] = "Open", [KEY_PASTE] = "Paste", - [KEY_FIND] = "Find", [KEY_CUT] = "Cut", - [KEY_HELP] = "Help", [KEY_MENU] = "Menu", - [KEY_CALC] = "Calc", [KEY_SETUP] = "Setup", - [KEY_SLEEP] = "Sleep", [KEY_WAKEUP] = "WakeUp", - [KEY_FILE] = "File", [KEY_SENDFILE] = "SendFile", - [KEY_DELETEFILE] = "DeleteFile", [KEY_XFER] = "X-fer", - [KEY_PROG1] = "Prog1", [KEY_PROG2] = "Prog2", - [KEY_WWW] = "WWW", [KEY_MSDOS] = "MSDOS", - [KEY_COFFEE] = "Coffee", [KEY_DIRECTION] = "Direction", - [KEY_CYCLEWINDOWS] = "CycleWindows", [KEY_MAIL] = "Mail", - [KEY_BOOKMARKS] = "Bookmarks", [KEY_COMPUTER] = "Computer", - [KEY_BACK] = "Back", [KEY_FORWARD] = "Forward", - [KEY_CLOSECD] = "CloseCD", [KEY_EJECTCD] = "EjectCD", - [KEY_EJECTCLOSECD] = "EjectCloseCD", [KEY_NEXTSONG] = "NextSong", - [KEY_PLAYPAUSE] = "PlayPause", [KEY_PREVIOUSSONG] = "PreviousSong", - [KEY_STOPCD] = "StopCD", [KEY_RECORD] = "Record", - [KEY_REWIND] = "Rewind", [KEY_PHONE] = "Phone", - [KEY_ISO] = "ISOKey", [KEY_CONFIG] = "Config", - [KEY_HOMEPAGE] = "HomePage", [KEY_REFRESH] = "Refresh", - [KEY_EXIT] = "Exit", [KEY_MOVE] = "Move", - [KEY_EDIT] = "Edit", [KEY_SCROLLUP] = "ScrollUp", - [KEY_SCROLLDOWN] = "ScrollDown", [KEY_KPLEFTPAREN] = "KPLeftParenthesis", - [KEY_KPRIGHTPAREN] = "KPRightParenthesis", [KEY_NEW] = "New", - [KEY_REDO] = "Redo", [KEY_F13] = "F13", - [KEY_F14] = "F14", [KEY_F15] = "F15", - [KEY_F16] = "F16", [KEY_F17] = "F17", - [KEY_F18] = "F18", [KEY_F19] = "F19", - [KEY_F20] = "F20", [KEY_F21] = "F21", - [KEY_F22] = "F22", [KEY_F23] = "F23", - [KEY_F24] = "F24", [KEY_PLAYCD] = "PlayCD", - [KEY_PAUSECD] = "PauseCD", [KEY_PROG3] = "Prog3", - [KEY_PROG4] = "Prog4", [KEY_SUSPEND] = "Suspend", - [KEY_CLOSE] = "Close", [KEY_PLAY] = "Play", - [KEY_FASTFORWARD] = "FastForward", [KEY_BASSBOOST] = "BassBoost", - [KEY_PRINT] = "Print", [KEY_HP] = "HP", - [KEY_CAMERA] = "Camera", [KEY_SOUND] = "Sound", - [KEY_QUESTION] = "Question", [KEY_EMAIL] = "Email", - [KEY_CHAT] = "Chat", [KEY_SEARCH] = "Search", - [KEY_CONNECT] = "Connect", [KEY_FINANCE] = "Finance", - [KEY_SPORT] = "Sport", [KEY_SHOP] = "Shop", - [KEY_ALTERASE] = "AlternateErase", [KEY_CANCEL] = "Cancel", - [KEY_BRIGHTNESSDOWN] = "BrightnessDown", [KEY_BRIGHTNESSUP] = "BrightnessUp", - [KEY_MEDIA] = "Media", [KEY_UNKNOWN] = "Unknown", - [BTN_0] = "Btn0", [BTN_1] = "Btn1", - [BTN_2] = "Btn2", [BTN_3] = "Btn3", - [BTN_4] = "Btn4", [BTN_5] = "Btn5", - [BTN_6] = "Btn6", [BTN_7] = "Btn7", - [BTN_8] = "Btn8", [BTN_9] = "Btn9", - [BTN_LEFT] = "LeftBtn", [BTN_RIGHT] = "RightBtn", - [BTN_MIDDLE] = "MiddleBtn", [BTN_SIDE] = "SideBtn", - [BTN_EXTRA] = "ExtraBtn", [BTN_FORWARD] = "ForwardBtn", - [BTN_BACK] = "BackBtn", [BTN_TASK] = "TaskBtn", - [BTN_TRIGGER] = "Trigger", [BTN_THUMB] = "ThumbBtn", - [BTN_THUMB2] = "ThumbBtn2", [BTN_TOP] = "TopBtn", - [BTN_TOP2] = "TopBtn2", [BTN_PINKIE] = "PinkieBtn", - [BTN_BASE] = "BaseBtn", [BTN_BASE2] = "BaseBtn2", - [BTN_BASE3] = "BaseBtn3", [BTN_BASE4] = "BaseBtn4", - [BTN_BASE5] = "BaseBtn5", [BTN_BASE6] = "BaseBtn6", - [BTN_DEAD] = "BtnDead", [BTN_A] = "BtnA", - [BTN_B] = "BtnB", [BTN_C] = "BtnC", - [BTN_X] = "BtnX", [BTN_Y] = "BtnY", - [BTN_Z] = "BtnZ", [BTN_TL] = "BtnTL", - [BTN_TR] = "BtnTR", [BTN_TL2] = "BtnTL2", - [BTN_TR2] = "BtnTR2", [BTN_SELECT] = "BtnSelect", - [BTN_START] = "BtnStart", [BTN_MODE] = "BtnMode", - [BTN_THUMBL] = "BtnThumbL", [BTN_THUMBR] = "BtnThumbR", - [BTN_TOOL_PEN] = "ToolPen", [BTN_TOOL_RUBBER] = "ToolRubber", - [BTN_TOOL_BRUSH] = "ToolBrush", [BTN_TOOL_PENCIL] = "ToolPencil", - [BTN_TOOL_AIRBRUSH] = "ToolAirbrush", [BTN_TOOL_FINGER] = "ToolFinger", - [BTN_TOOL_MOUSE] = "ToolMouse", [BTN_TOOL_LENS] = "ToolLens", - [BTN_TOUCH] = "Touch", [BTN_STYLUS] = "Stylus", - [BTN_STYLUS2] = "Stylus2", [BTN_TOOL_DOUBLETAP] = "ToolDoubleTap", - [BTN_TOOL_TRIPLETAP] = "ToolTripleTap", [BTN_GEAR_DOWN] = "WheelBtn", - [BTN_GEAR_UP] = "Gear up", [KEY_OK] = "Ok", - [KEY_SELECT] = "Select", [KEY_GOTO] = "Goto", - [KEY_CLEAR] = "Clear", [KEY_POWER2] = "Power2", - [KEY_OPTION] = "Option", [KEY_INFO] = "Info", - [KEY_TIME] = "Time", [KEY_VENDOR] = "Vendor", - [KEY_ARCHIVE] = "Archive", [KEY_PROGRAM] = "Program", - [KEY_CHANNEL] = "Channel", [KEY_FAVORITES] = "Favorites", - [KEY_EPG] = "EPG", [KEY_PVR] = "PVR", - [KEY_MHP] = "MHP", [KEY_LANGUAGE] = "Language", - [KEY_TITLE] = "Title", [KEY_SUBTITLE] = "Subtitle", - [KEY_ANGLE] = "Angle", [KEY_ZOOM] = "Zoom", - [KEY_MODE] = "Mode", [KEY_KEYBOARD] = "Keyboard", - [KEY_SCREEN] = "Screen", [KEY_PC] = "PC", - [KEY_TV] = "TV", [KEY_TV2] = "TV2", - [KEY_VCR] = "VCR", [KEY_VCR2] = "VCR2", - [KEY_SAT] = "Sat", [KEY_SAT2] = "Sat2", - [KEY_CD] = "CD", [KEY_TAPE] = "Tape", - [KEY_RADIO] = "Radio", [KEY_TUNER] = "Tuner", - [KEY_PLAYER] = "Player", [KEY_TEXT] = "Text", - [KEY_DVD] = "DVD", [KEY_AUX] = "Aux", - [KEY_MP3] = "MP3", [KEY_AUDIO] = "Audio", - [KEY_VIDEO] = "Video", [KEY_DIRECTORY] = "Directory", - [KEY_LIST] = "List", [KEY_MEMO] = "Memo", - [KEY_CALENDAR] = "Calendar", [KEY_RED] = "Red", - [KEY_GREEN] = "Green", [KEY_YELLOW] = "Yellow", - [KEY_BLUE] = "Blue", [KEY_CHANNELUP] = "ChannelUp", - [KEY_CHANNELDOWN] = "ChannelDown", [KEY_FIRST] = "First", - [KEY_LAST] = "Last", [KEY_AB] = "AB", - [KEY_NEXT] = "Next", [KEY_RESTART] = "Restart", - [KEY_SLOW] = "Slow", [KEY_SHUFFLE] = "Shuffle", - [KEY_BREAK] = "Break", [KEY_PREVIOUS] = "Previous", - [KEY_DIGITS] = "Digits", [KEY_TEEN] = "TEEN", - [KEY_TWEN] = "TWEN", [KEY_DEL_EOL] = "DeleteEOL", - [KEY_DEL_EOS] = "DeleteEOS", [KEY_INS_LINE] = "InsertLine", - [KEY_DEL_LINE] = "DeleteLine", - [KEY_SEND] = "Send", [KEY_REPLY] = "Reply", - [KEY_FORWARDMAIL] = "ForwardMail", [KEY_SAVE] = "Save", - [KEY_DOCUMENTS] = "Documents", - [KEY_FN] = "Fn", [KEY_FN_ESC] = "Fn+ESC", - [KEY_FN_1] = "Fn+1", [KEY_FN_2] = "Fn+2", - [KEY_FN_B] = "Fn+B", [KEY_FN_D] = "Fn+D", - [KEY_FN_E] = "Fn+E", [KEY_FN_F] = "Fn+F", - [KEY_FN_S] = "Fn+S", - [KEY_FN_F1] = "Fn+F1", [KEY_FN_F2] = "Fn+F2", - [KEY_FN_F3] = "Fn+F3", [KEY_FN_F4] = "Fn+F4", - [KEY_FN_F5] = "Fn+F5", [KEY_FN_F6] = "Fn+F6", - [KEY_FN_F7] = "Fn+F7", [KEY_FN_F8] = "Fn+F8", - [KEY_FN_F9] = "Fn+F9", [KEY_FN_F10] = "Fn+F10", - [KEY_FN_F11] = "Fn+F11", [KEY_FN_F12] = "Fn+F12", - [KEY_KBDILLUMTOGGLE] = "KbdIlluminationToggle", - [KEY_KBDILLUMDOWN] = "KbdIlluminationDown", - [KEY_KBDILLUMUP] = "KbdIlluminationUp", - [KEY_SWITCHVIDEOMODE] = "SwitchVideoMode", -}; - -static char *relatives[REL_MAX + 1] = { - [REL_X] = "X", [REL_Y] = "Y", - [REL_Z] = "Z", [REL_HWHEEL] = "HWheel", - [REL_DIAL] = "Dial", [REL_WHEEL] = "Wheel", - [REL_MISC] = "Misc", -}; - -static char *absolutes[ABS_MAX + 1] = { - [ABS_X] = "X", [ABS_Y] = "Y", - [ABS_Z] = "Z", [ABS_RX] = "Rx", - [ABS_RY] = "Ry", [ABS_RZ] = "Rz", - [ABS_THROTTLE] = "Throttle", [ABS_RUDDER] = "Rudder", - [ABS_WHEEL] = "Wheel", [ABS_GAS] = "Gas", - [ABS_BRAKE] = "Brake", [ABS_HAT0X] = "Hat0X", - [ABS_HAT0Y] = "Hat0Y", [ABS_HAT1X] = "Hat1X", - [ABS_HAT1Y] = "Hat1Y", [ABS_HAT2X] = "Hat2X", - [ABS_HAT2Y] = "Hat2Y", [ABS_HAT3X] = "Hat3X", - [ABS_HAT3Y] = "Hat 3Y", [ABS_PRESSURE] = "Pressure", - [ABS_DISTANCE] = "Distance", [ABS_TILT_X] = "XTilt", - [ABS_TILT_Y] = "YTilt", [ABS_TOOL_WIDTH] = "Tool Width", - [ABS_VOLUME] = "Volume", [ABS_MISC] = "Misc", -}; - -static char *misc[MSC_MAX + 1] = { - [MSC_SERIAL] = "Serial", [MSC_PULSELED] = "Pulseled", - [MSC_GESTURE] = "Gesture", [MSC_RAW] = "RawData" -}; - -static char *leds[LED_MAX + 1] = { - [LED_NUML] = "NumLock", [LED_CAPSL] = "CapsLock", - [LED_SCROLLL] = "ScrollLock", [LED_COMPOSE] = "Compose", - [LED_KANA] = "Kana", [LED_SLEEP] = "Sleep", - [LED_SUSPEND] = "Suspend", [LED_MUTE] = "Mute", - [LED_MISC] = "Misc", -}; - -static char *repeats[REP_MAX + 1] = { - [REP_DELAY] = "Delay", [REP_PERIOD] = "Period" -}; - -static char *sounds[SND_MAX + 1] = { - [SND_CLICK] = "Click", [SND_BELL] = "Bell", - [SND_TONE] = "Tone" -}; - -static char **names[EV_MAX + 1] = { - [EV_SYN] = syncs, [EV_KEY] = keys, - [EV_REL] = relatives, [EV_ABS] = absolutes, - [EV_MSC] = misc, [EV_LED] = leds, - [EV_SND] = sounds, [EV_REP] = repeats, -}; - -static void __attribute__((unused)) resolv_event(__u8 type, __u16 code) { - - printk("%s.%s", events[type] ? events[type] : "?", - names[type] ? (names[type][code] ? names[type][code] : "?") : "?"); -} diff --git a/drivers/usb/input/hid-ff.c b/drivers/usb/input/hid-ff.c index 0d644fa37c6..bc7f8e6f8c9 100644 --- a/drivers/usb/input/hid-ff.c +++ b/drivers/usb/input/hid-ff.c @@ -32,7 +32,8 @@ #undef DEBUG #include <linux/usb.h> -#include "hid.h" +#include <linux/hid.h> +#include "usbhid.h" /* * This table contains pointers to initializers. To add support for new @@ -58,6 +59,9 @@ static struct hid_ff_initializer inits[] = { { 0x46d, 0xc219, hid_lgff_init }, /* Logitech Cordless rumble pad 2 */ { 0x46d, 0xca03, hid_lgff_init }, /* Logitech MOMO force wheel */ #endif +#ifdef CONFIG_PANTHERLORD_FF + { 0x810, 0x0001, hid_plff_init }, +#endif #ifdef CONFIG_THRUSTMASTER_FF { 0x44f, 0xb304, hid_tmff_init }, #endif @@ -71,8 +75,8 @@ static struct hid_ff_initializer inits[] = { int hid_ff_init(struct hid_device* hid) { struct hid_ff_initializer *init; - int vendor = le16_to_cpu(hid->dev->descriptor.idVendor); - int product = le16_to_cpu(hid->dev->descriptor.idProduct); + int vendor = le16_to_cpu(hid_to_usb_dev(hid)->descriptor.idVendor); + int product = le16_to_cpu(hid_to_usb_dev(hid)->descriptor.idProduct); for (init = inits; init->idVendor; init++) if (init->idVendor == vendor && init->idProduct == product) @@ -80,3 +84,5 @@ int hid_ff_init(struct hid_device* hid) return init->init(hid); } +EXPORT_SYMBOL_GPL(hid_ff_init); + diff --git a/drivers/usb/input/hid-input.c b/drivers/usb/input/hid-input.c deleted file mode 100644 index 3a7e5fbff02..00000000000 --- a/drivers/usb/input/hid-input.c +++ /dev/null @@ -1,872 +0,0 @@ -/* - * $Id: hid-input.c,v 1.2 2002/04/23 00:59:25 rdamazio Exp $ - * - * Copyright (c) 2000-2001 Vojtech Pavlik - * - * USB HID to Linux Input mapping - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Should you need to contact me, the author, you can do so either by - * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail: - * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic - */ - -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/kernel.h> -#include <linux/usb/input.h> - -#undef DEBUG - -#include "hid.h" - -#define unk KEY_UNKNOWN - -static const unsigned char hid_keyboard[256] = { - 0, 0, 0, 0, 30, 48, 46, 32, 18, 33, 34, 35, 23, 36, 37, 38, - 50, 49, 24, 25, 16, 19, 31, 20, 22, 47, 17, 45, 21, 44, 2, 3, - 4, 5, 6, 7, 8, 9, 10, 11, 28, 1, 14, 15, 57, 12, 13, 26, - 27, 43, 43, 39, 40, 41, 51, 52, 53, 58, 59, 60, 61, 62, 63, 64, - 65, 66, 67, 68, 87, 88, 99, 70,119,110,102,104,111,107,109,106, - 105,108,103, 69, 98, 55, 74, 78, 96, 79, 80, 81, 75, 76, 77, 71, - 72, 73, 82, 83, 86,127,116,117,183,184,185,186,187,188,189,190, - 191,192,193,194,134,138,130,132,128,129,131,137,133,135,136,113, - 115,114,unk,unk,unk,121,unk, 89, 93,124, 92, 94, 95,unk,unk,unk, - 122,123, 90, 91, 85,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk, - unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk, - unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk, - unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk, - unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk,unk, - 29, 42, 56,125, 97, 54,100,126,164,166,165,163,161,115,114,113, - 150,158,159,128,136,177,178,176,142,152,173,140,unk,unk,unk,unk -}; - -static const struct { - __s32 x; - __s32 y; -} hid_hat_to_axis[] = {{ 0, 0}, { 0,-1}, { 1,-1}, { 1, 0}, { 1, 1}, { 0, 1}, {-1, 1}, {-1, 0}, {-1,-1}}; - -#define map_abs(c) do { usage->code = c; usage->type = EV_ABS; bit = input->absbit; max = ABS_MAX; } while (0) -#define map_rel(c) do { usage->code = c; usage->type = EV_REL; bit = input->relbit; max = REL_MAX; } while (0) -#define map_key(c) do { usage->code = c; usage->type = EV_KEY; bit = input->keybit; max = KEY_MAX; } while (0) -#define map_led(c) do { usage->code = c; usage->type = EV_LED; bit = input->ledbit; max = LED_MAX; } while (0) - -#define map_abs_clear(c) do { map_abs(c); clear_bit(c, bit); } while (0) -#define map_key_clear(c) do { map_key(c); clear_bit(c, bit); } while (0) - -#ifdef CONFIG_USB_HIDINPUT_POWERBOOK - -struct hidinput_key_translation { - u16 from; - u16 to; - u8 flags; -}; - -#define POWERBOOK_FLAG_FKEY 0x01 - -static struct hidinput_key_translation powerbook_fn_keys[] = { - { KEY_BACKSPACE, KEY_DELETE }, - { KEY_F1, KEY_BRIGHTNESSDOWN, POWERBOOK_FLAG_FKEY }, - { KEY_F2, KEY_BRIGHTNESSUP, POWERBOOK_FLAG_FKEY }, - { KEY_F3, KEY_MUTE, POWERBOOK_FLAG_FKEY }, - { KEY_F4, KEY_VOLUMEDOWN, POWERBOOK_FLAG_FKEY }, - { KEY_F5, KEY_VOLUMEUP, POWERBOOK_FLAG_FKEY }, - { KEY_F6, KEY_NUMLOCK, POWERBOOK_FLAG_FKEY }, - { KEY_F7, KEY_SWITCHVIDEOMODE, POWERBOOK_FLAG_FKEY }, - { KEY_F8, KEY_KBDILLUMTOGGLE, POWERBOOK_FLAG_FKEY }, - { KEY_F9, KEY_KBDILLUMDOWN, POWERBOOK_FLAG_FKEY }, - { KEY_F10, KEY_KBDILLUMUP, POWERBOOK_FLAG_FKEY }, - { KEY_UP, KEY_PAGEUP }, - { KEY_DOWN, KEY_PAGEDOWN }, - { KEY_LEFT, KEY_HOME }, - { KEY_RIGHT, KEY_END }, - { } -}; - -static struct hidinput_key_translation powerbook_numlock_keys[] = { - { KEY_J, KEY_KP1 }, - { KEY_K, KEY_KP2 }, - { KEY_L, KEY_KP3 }, - { KEY_U, KEY_KP4 }, - { KEY_I, KEY_KP5 }, - { KEY_O, KEY_KP6 }, - { KEY_7, KEY_KP7 }, - { KEY_8, KEY_KP8 }, - { KEY_9, KEY_KP9 }, - { KEY_M, KEY_KP0 }, - { KEY_DOT, KEY_KPDOT }, - { KEY_SLASH, KEY_KPPLUS }, - { KEY_SEMICOLON, KEY_KPMINUS }, - { KEY_P, KEY_KPASTERISK }, - { KEY_MINUS, KEY_KPEQUAL }, - { KEY_0, KEY_KPSLASH }, - { KEY_F6, KEY_NUMLOCK }, - { KEY_KPENTER, KEY_KPENTER }, - { KEY_BACKSPACE, KEY_BACKSPACE }, - { } -}; - -static struct hidinput_key_translation powerbook_iso_keyboard[] = { - { KEY_GRAVE, KEY_102ND }, - { KEY_102ND, KEY_GRAVE }, - { } -}; - -static int usbhid_pb_fnmode = 1; -module_param_named(pb_fnmode, usbhid_pb_fnmode, int, 0644); -MODULE_PARM_DESC(pb_fnmode, - "Mode of fn key on PowerBooks (0 = disabled, 1 = fkeyslast, 2 = fkeysfirst)"); - -static struct hidinput_key_translation *find_translation(struct hidinput_key_translation *table, u16 from) -{ - struct hidinput_key_translation *trans; - - /* Look for the translation */ - for (trans = table; trans->from; trans++) - if (trans->from == from) - return trans; - - return NULL; -} - -static int hidinput_pb_event(struct hid_device *hid, struct input_dev *input, - struct hid_usage *usage, __s32 value) -{ - struct hidinput_key_translation *trans; - - if (usage->code == KEY_FN) { - if (value) hid->quirks |= HID_QUIRK_POWERBOOK_FN_ON; - else hid->quirks &= ~HID_QUIRK_POWERBOOK_FN_ON; - - input_event(input, usage->type, usage->code, value); - - return 1; - } - - if (usbhid_pb_fnmode) { - int do_translate; - - trans = find_translation(powerbook_fn_keys, usage->code); - if (trans) { - if (test_bit(usage->code, hid->pb_pressed_fn)) - do_translate = 1; - else if (trans->flags & POWERBOOK_FLAG_FKEY) - do_translate = - (usbhid_pb_fnmode == 2 && (hid->quirks & HID_QUIRK_POWERBOOK_FN_ON)) || - (usbhid_pb_fnmode == 1 && !(hid->quirks & HID_QUIRK_POWERBOOK_FN_ON)); - else - do_translate = (hid->quirks & HID_QUIRK_POWERBOOK_FN_ON); - - if (do_translate) { - if (value) - set_bit(usage->code, hid->pb_pressed_fn); - else - clear_bit(usage->code, hid->pb_pressed_fn); - - input_event(input, usage->type, trans->to, value); - - return 1; - } - } - - if (test_bit(usage->code, hid->pb_pressed_numlock) || - test_bit(LED_NUML, input->led)) { - trans = find_translation(powerbook_numlock_keys, usage->code); - - if (trans) { - if (value) - set_bit(usage->code, hid->pb_pressed_numlock); - else - clear_bit(usage->code, hid->pb_pressed_numlock); - - input_event(input, usage->type, trans->to, value); - } - - return 1; - } - } - - if (hid->quirks & HID_QUIRK_POWERBOOK_ISO_KEYBOARD) { - trans = find_translation(powerbook_iso_keyboard, usage->code); - if (trans) { - input_event(input, usage->type, trans->to, value); - return 1; - } - } - - return 0; -} - -static void hidinput_pb_setup(struct input_dev *input) -{ - struct hidinput_key_translation *trans; - - set_bit(KEY_NUMLOCK, input->keybit); - - /* Enable all needed keys */ - for (trans = powerbook_fn_keys; trans->from; trans++) - set_bit(trans->to, input->keybit); - - for (trans = powerbook_numlock_keys; trans->from; trans++) - set_bit(trans->to, input->keybit); - - for (trans = powerbook_iso_keyboard; trans->from; trans++) - set_bit(trans->to, input->keybit); -} -#else -static inline int hidinput_pb_event(struct hid_device *hid, struct input_dev *input, - struct hid_usage *usage, __s32 value) -{ - return 0; -} - -static inline void hidinput_pb_setup(struct input_dev *input) -{ -} -#endif - -static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_field *field, - struct hid_usage *usage) -{ - struct input_dev *input = hidinput->input; - struct hid_device *device = input->private; - int max = 0, code; - unsigned long *bit = NULL; - - field->hidinput = hidinput; - -#ifdef DEBUG - printk(KERN_DEBUG "Mapping: "); - resolv_usage(usage->hid); - printk(" ---> "); -#endif - - if (field->flags & HID_MAIN_ITEM_CONSTANT) - goto ignore; - - switch (usage->hid & HID_USAGE_PAGE) { - - case HID_UP_UNDEFINED: - goto ignore; - - case HID_UP_KEYBOARD: - - set_bit(EV_REP, input->evbit); - - if ((usage->hid & HID_USAGE) < 256) { - if (!hid_keyboard[usage->hid & HID_USAGE]) goto ignore; - map_key_clear(hid_keyboard[usage->hid & HID_USAGE]); - } else - map_key(KEY_UNKNOWN); - - break; - - case HID_UP_BUTTON: - - code = ((usage->hid - 1) & 0xf); - - switch (field->application) { - case HID_GD_MOUSE: - case HID_GD_POINTER: code += 0x110; break; - case HID_GD_JOYSTICK: code += 0x120; break; - case HID_GD_GAMEPAD: code += 0x130; break; - default: - switch (field->physical) { - case HID_GD_MOUSE: - case HID_GD_POINTER: code += 0x110; break; - case HID_GD_JOYSTICK: code += 0x120; break; - case HID_GD_GAMEPAD: code += 0x130; break; - default: code += 0x100; - } - } - - map_key(code); - break; - - - case HID_UP_SIMULATION: - - switch (usage->hid & 0xffff) { - case 0xba: map_abs(ABS_RUDDER); break; - case 0xbb: map_abs(ABS_THROTTLE); break; - case 0xc4: map_abs(ABS_GAS); break; - case 0xc5: map_abs(ABS_BRAKE); break; - case 0xc8: map_abs(ABS_WHEEL); break; - default: goto ignore; - } - break; - - case HID_UP_GENDESK: - - if ((usage->hid & 0xf0) == 0x80) { /* SystemControl */ - switch (usage->hid & 0xf) { - case 0x1: map_key_clear(KEY_POWER); break; - case 0x2: map_key_clear(KEY_SLEEP); break; - case 0x3: map_key_clear(KEY_WAKEUP); break; - default: goto unknown; - } - break; - } - - if ((usage->hid & 0xf0) == 0x90) { /* D-pad */ - switch (usage->hid) { - case HID_GD_UP: usage->hat_dir = 1; break; - case HID_GD_DOWN: usage->hat_dir = 5; break; - case HID_GD_RIGHT: usage->hat_dir = 3; break; - case HID_GD_LEFT: usage->hat_dir = 7; break; - default: goto unknown; - } - if (field->dpad) { - map_abs(field->dpad); - goto ignore; - } - map_abs(ABS_HAT0X); - break; - } - - switch (usage->hid) { - - /* These usage IDs map directly to the usage codes. */ - case HID_GD_X: case HID_GD_Y: case HID_GD_Z: - case HID_GD_RX: case HID_GD_RY: case HID_GD_RZ: - case HID_GD_SLIDER: case HID_GD_DIAL: case HID_GD_WHEEL: - if (field->flags & HID_MAIN_ITEM_RELATIVE) - map_rel(usage->hid & 0xf); - else - map_abs(usage->hid & 0xf); - break; - - case HID_GD_HATSWITCH: - usage->hat_min = field->logical_minimum; - usage->hat_max = field->logical_maximum; - map_abs(ABS_HAT0X); - break; - - case HID_GD_START: map_key_clear(BTN_START); break; - case HID_GD_SELECT: map_key_clear(BTN_SELECT); break; - - default: goto unknown; - } - - break; - - case HID_UP_LED: - if (((usage->hid - 1) & 0xffff) >= LED_MAX) - goto ignore; - map_led((usage->hid - 1) & 0xffff); - break; - - case HID_UP_DIGITIZER: - - switch (usage->hid & 0xff) { - - case 0x30: /* TipPressure */ - if (!test_bit(BTN_TOUCH, input->keybit)) { - device->quirks |= HID_QUIRK_NOTOUCH; - set_bit(EV_KEY, input->evbit); - set_bit(BTN_TOUCH, input->keybit); - } - - map_abs_clear(ABS_PRESSURE); - break; - - case 0x32: /* InRange */ - switch (field->physical & 0xff) { - case 0x21: map_key(BTN_TOOL_MOUSE); break; - case 0x22: map_key(BTN_TOOL_FINGER); break; - default: map_key(BTN_TOOL_PEN); break; - } - break; - - case 0x3c: /* Invert */ - map_key_clear(BTN_TOOL_RUBBER); - break; - - case 0x33: /* Touch */ - case 0x42: /* TipSwitch */ - case 0x43: /* TipSwitch2 */ - device->quirks &= ~HID_QUIRK_NOTOUCH; - map_key_clear(BTN_TOUCH); - break; - - case 0x44: /* BarrelSwitch */ - map_key_clear(BTN_STYLUS); - break; - - default: goto unknown; - } - break; - - case HID_UP_CONSUMER: /* USB HUT v1.1, pages 56-62 */ - - switch (usage->hid & HID_USAGE) { - case 0x000: goto ignore; - case 0x034: map_key_clear(KEY_SLEEP); break; - case 0x036: map_key_clear(BTN_MISC); break; - case 0x045: map_key_clear(KEY_RADIO); break; - case 0x08a: map_key_clear(KEY_WWW); break; - case 0x08d: map_key_clear(KEY_PROGRAM); break; - case 0x095: map_key_clear(KEY_HELP); break; - case 0x09c: map_key_clear(KEY_CHANNELUP); break; - case 0x09d: map_key_clear(KEY_CHANNELDOWN); break; - case 0x0b0: map_key_clear(KEY_PLAY); break; - case 0x0b1: map_key_clear(KEY_PAUSE); break; - case 0x0b2: map_key_clear(KEY_RECORD); break; - case 0x0b3: map_key_clear(KEY_FASTFORWARD); break; - case 0x0b4: map_key_clear(KEY_REWIND); break; - case 0x0b5: map_key_clear(KEY_NEXTSONG); break; - case 0x0b6: map_key_clear(KEY_PREVIOUSSONG); break; - case 0x0b7: map_key_clear(KEY_STOPCD); break; - case 0x0b8: map_key_clear(KEY_EJECTCD); break; - case 0x0cd: map_key_clear(KEY_PLAYPAUSE); break; - case 0x0e0: map_abs_clear(ABS_VOLUME); break; - case 0x0e2: map_key_clear(KEY_MUTE); break; - case 0x0e5: map_key_clear(KEY_BASSBOOST); break; - case 0x0e9: map_key_clear(KEY_VOLUMEUP); break; - case 0x0ea: map_key_clear(KEY_VOLUMEDOWN); break; - case 0x183: map_key_clear(KEY_CONFIG); break; - case 0x18a: map_key_clear(KEY_MAIL); break; - case 0x192: map_key_clear(KEY_CALC); break; - case 0x194: map_key_clear(KEY_FILE); break; - case 0x1a7: map_key_clear(KEY_DOCUMENTS); break; - case 0x201: map_key_clear(KEY_NEW); break; - case 0x207: map_key_clear(KEY_SAVE); break; - case 0x208: map_key_clear(KEY_PRINT); break; - case 0x209: map_key_clear(KEY_PROPS); break; - case 0x21a: map_key_clear(KEY_UNDO); break; - case 0x21b: map_key_clear(KEY_COPY); break; - case 0x21c: map_key_clear(KEY_CUT); break; - case 0x21d: map_key_clear(KEY_PASTE); break; - case 0x221: map_key_clear(KEY_FIND); break; - case 0x223: map_key_clear(KEY_HOMEPAGE); break; - case 0x224: map_key_clear(KEY_BACK); break; - case 0x225: map_key_clear(KEY_FORWARD); break; - case 0x226: map_key_clear(KEY_STOP); break; - case 0x227: map_key_clear(KEY_REFRESH); break; - case 0x22a: map_key_clear(KEY_BOOKMARKS); break; - case 0x233: map_key_clear(KEY_SCROLLUP); break; - case 0x234: map_key_clear(KEY_SCROLLDOWN); break; - case 0x238: map_rel(REL_HWHEEL); break; - case 0x279: map_key_clear(KEY_REDO); break; - case 0x289: map_key_clear(KEY_REPLY); break; - case 0x28b: map_key_clear(KEY_FORWARDMAIL); break; - case 0x28c: map_key_clear(KEY_SEND); break; - - /* Reported on a Cherry Cymotion keyboard */ - case 0x301: map_key_clear(KEY_PROG1); break; - case 0x302: map_key_clear(KEY_PROG2); break; - case 0x303: map_key_clear(KEY_PROG3); break; - - default: goto ignore; - } - break; - - case HID_UP_HPVENDOR: /* Reported on a Dutch layout HP5308 */ - - set_bit(EV_REP, input->evbit); - switch (usage->hid & HID_USAGE) { - case 0x021: map_key_clear(KEY_PRINT); break; - case 0x070: map_key_clear(KEY_HP); break; - case 0x071: map_key_clear(KEY_CAMERA); break; - case 0x072: map_key_clear(KEY_SOUND); break; - case 0x073: map_key_clear(KEY_QUESTION); break; - case 0x080: map_key_clear(KEY_EMAIL); break; - case 0x081: map_key_clear(KEY_CHAT); break; - case 0x082: map_key_clear(KEY_SEARCH); break; - case 0x083: map_key_clear(KEY_CONNECT); break; - case 0x084: map_key_clear(KEY_FINANCE); break; - case 0x085: map_key_clear(KEY_SPORT); break; - case 0x086: map_key_clear(KEY_SHOP); break; - default: goto ignore; - } - break; - - case HID_UP_MSVENDOR: - goto ignore; - - case HID_UP_CUSTOM: /* Reported on Logitech and Powerbook USB keyboards */ - - set_bit(EV_REP, input->evbit); - switch(usage->hid & HID_USAGE) { - case 0x003: - /* The fn key on Apple PowerBooks */ - map_key_clear(KEY_FN); - hidinput_pb_setup(input); - break; - - default: goto ignore; - } - break; - - case HID_UP_LOGIVENDOR: /* Reported on Logitech Ultra X Media Remote */ - - set_bit(EV_REP, input->evbit); - switch(usage->hid & HID_USAGE) { - case 0x004: map_key_clear(KEY_AGAIN); break; - case 0x00d: map_key_clear(KEY_HOME); break; - case 0x024: map_key_clear(KEY_SHUFFLE); break; - case 0x025: map_key_clear(KEY_TV); break; - case 0x026: map_key_clear(KEY_MENU); break; - case 0x031: map_key_clear(KEY_AUDIO); break; - case 0x032: map_key_clear(KEY_TEXT); break; - case 0x033: map_key_clear(KEY_LAST); break; - case 0x047: map_key_clear(KEY_MP3); break; - case 0x048: map_key_clear(KEY_DVD); break; - case 0x049: map_key_clear(KEY_MEDIA); break; - case 0x04a: map_key_clear(KEY_VIDEO); break; - case 0x04b: map_key_clear(KEY_ANGLE); break; - case 0x04c: map_key_clear(KEY_LANGUAGE); break; - case 0x04d: map_key_clear(KEY_SUBTITLE); break; - case 0x051: map_key_clear(KEY_RED); break; - case 0x052: map_key_clear(KEY_CLOSE); break; - default: goto ignore; - } - break; - - case HID_UP_PID: - - switch(usage->hid & HID_USAGE) { - case 0xa4: map_key_clear(BTN_DEAD); break; - default: goto ignore; - } - break; - - default: - unknown: - if (field->report_size == 1) { - if (field->report->type == HID_OUTPUT_REPORT) { - map_led(LED_MISC); - break; - } - map_key(BTN_MISC); - break; - } - if (field->flags & HID_MAIN_ITEM_RELATIVE) { - map_rel(REL_MISC); - break; - } - map_abs(ABS_MISC); - break; - } - - if (device->quirks & HID_QUIRK_MIGHTYMOUSE) { - if (usage->hid == HID_GD_Z) - map_rel(REL_HWHEEL); - else if (usage->code == BTN_1) - map_key(BTN_2); - else if (usage->code == BTN_2) - map_key(BTN_1); - } - - if ((device->quirks & (HID_QUIRK_2WHEEL_MOUSE_HACK_7 | HID_QUIRK_2WHEEL_MOUSE_HACK_5)) && - (usage->type == EV_REL) && (usage->code == REL_WHEEL)) - set_bit(REL_HWHEEL, bit); - - if (((device->quirks & HID_QUIRK_2WHEEL_MOUSE_HACK_5) && (usage->hid == 0x00090005)) - || ((device->quirks & HID_QUIRK_2WHEEL_MOUSE_HACK_7) && (usage->hid == 0x00090007))) - goto ignore; - - if ((device->quirks & HID_QUIRK_BAD_RELATIVE_KEYS) && - usage->type == EV_KEY && (field->flags & HID_MAIN_ITEM_RELATIVE)) - field->flags &= ~HID_MAIN_ITEM_RELATIVE; - - set_bit(usage->type, input->evbit); - - while (usage->code <= max && test_and_set_bit(usage->code, bit)) - usage->code = find_next_zero_bit(bit, max + 1, usage->code); - - if (usage->code > max) - goto ignore; - - - if (usage->type == EV_ABS) { - - int a = field->logical_minimum; - int b = field->logical_maximum; - - if ((device->quirks & HID_QUIRK_BADPAD) && (usage->code == ABS_X || usage->code == ABS_Y)) { - a = field->logical_minimum = 0; - b = field->logical_maximum = 255; - } - - if (field->application == HID_GD_GAMEPAD || field->application == HID_GD_JOYSTICK) - input_set_abs_params(input, usage->code, a, b, (b - a) >> 8, (b - a) >> 4); - else input_set_abs_params(input, usage->code, a, b, 0, 0); - - } - - if (usage->type == EV_ABS && - (usage->hat_min < usage->hat_max || usage->hat_dir)) { - int i; - for (i = usage->code; i < usage->code + 2 && i <= max; i++) { - input_set_abs_params(input, i, -1, 1, 0, 0); - set_bit(i, input->absbit); - } - if (usage->hat_dir && !field->dpad) - field->dpad = usage->code; - } - -#ifdef DEBUG - resolv_event(usage->type, usage->code); - printk("\n"); -#endif - return; - -ignore: -#ifdef DEBUG - printk("IGNORED\n"); -#endif - return; -} - -void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct hid_usage *usage, __s32 value) -{ - struct input_dev *input; - int *quirks = &hid->quirks; - - if (!field->hidinput) - return; - - input = field->hidinput->input; - - if (!usage->type) - return; - - if (((hid->quirks & HID_QUIRK_2WHEEL_MOUSE_HACK_5) && (usage->hid == 0x00090005)) - || ((hid->quirks & HID_QUIRK_2WHEEL_MOUSE_HACK_7) && (usage->hid == 0x00090007))) { - if (value) hid->quirks |= HID_QUIRK_2WHEEL_MOUSE_HACK_ON; - else hid->quirks &= ~HID_QUIRK_2WHEEL_MOUSE_HACK_ON; - return; - } - - if ((hid->quirks & HID_QUIRK_INVERT_HWHEEL) && (usage->code == REL_HWHEEL)) { - input_event(input, usage->type, usage->code, -value); - return; - } - - if ((hid->quirks & HID_QUIRK_2WHEEL_MOUSE_HACK_ON) && (usage->code == REL_WHEEL)) { - input_event(input, usage->type, REL_HWHEEL, value); - return; - } - - if ((hid->quirks & HID_QUIRK_POWERBOOK_HAS_FN) && hidinput_pb_event(hid, input, usage, value)) - return; - - if (usage->hat_min < usage->hat_max || usage->hat_dir) { - int hat_dir = usage->hat_dir; - if (!hat_dir) - hat_dir = (value - usage->hat_min) * 8 / (usage->hat_max - usage->hat_min + 1) + 1; - if (hat_dir < 0 || hat_dir > 8) hat_dir = 0; - input_event(input, usage->type, usage->code , hid_hat_to_axis[hat_dir].x); - input_event(input, usage->type, usage->code + 1, hid_hat_to_axis[hat_dir].y); - return; - } - - if (usage->hid == (HID_UP_DIGITIZER | 0x003c)) { /* Invert */ - *quirks = value ? (*quirks | HID_QUIRK_INVERT) : (*quirks & ~HID_QUIRK_INVERT); - return; - } - - if (usage->hid == (HID_UP_DIGITIZER | 0x0032)) { /* InRange */ - if (value) { - input_event(input, usage->type, (*quirks & HID_QUIRK_INVERT) ? BTN_TOOL_RUBBER : usage->code, 1); - return; - } - input_event(input, usage->type, usage->code, 0); - input_event(input, usage->type, BTN_TOOL_RUBBER, 0); - return; - } - - if (usage->hid == (HID_UP_DIGITIZER | 0x0030) && (*quirks & HID_QUIRK_NOTOUCH)) { /* Pressure */ - int a = field->logical_minimum; - int b = field->logical_maximum; - input_event(input, EV_KEY, BTN_TOUCH, value > a + ((b - a) >> 3)); - } - - if (usage->hid == (HID_UP_PID | 0x83UL)) { /* Simultaneous Effects Max */ - dbg("Maximum Effects - %d",value); - return; - } - - if (usage->hid == (HID_UP_PID | 0x7fUL)) { - dbg("PID Pool Report\n"); - return; - } - - if ((usage->type == EV_KEY) && (usage->code == 0)) /* Key 0 is "unassigned", not KEY_UNKNOWN */ - return; - - input_event(input, usage->type, usage->code, value); - - if ((field->flags & HID_MAIN_ITEM_RELATIVE) && (usage->type == EV_KEY)) - input_event(input, usage->type, usage->code, 0); -} - -void hidinput_report_event(struct hid_device *hid, struct hid_report *report) -{ - struct hid_input *hidinput; - - list_for_each_entry(hidinput, &hid->inputs, list) - input_sync(hidinput->input); -} - -static int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int code, struct hid_field **field) -{ - struct hid_report *report; - int i, j; - - list_for_each_entry(report, &hid->report_enum[HID_OUTPUT_REPORT].report_list, list) { - for (i = 0; i < report->maxfield; i++) { - *field = report->field[i]; - for (j = 0; j < (*field)->maxusage; j++) - if ((*field)->usage[j].type == type && (*field)->usage[j].code == code) - return j; - } - } - return -1; -} - -static int hidinput_input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value) -{ - struct hid_device *hid = dev->private; - struct hid_field *field; - int offset; - - if (type == EV_FF) - return input_ff_event(dev, type, code, value); - - if (type != EV_LED) - return -1; - - if ((offset = hidinput_find_field(hid, type, code, &field)) == -1) { - warn("event field not found"); - return -1; - } - - hid_set_field(field, offset, value); - hid_submit_report(hid, field->report, USB_DIR_OUT); - - return 0; -} - -static int hidinput_open(struct input_dev *dev) -{ - struct hid_device *hid = dev->private; - return hid_open(hid); -} - -static void hidinput_close(struct input_dev *dev) -{ - struct hid_device *hid = dev->private; - hid_close(hid); -} - -/* - * Register the input device; print a message. - * Configure the input layer interface - * Read all reports and initialize the absolute field values. - */ - -int hidinput_connect(struct hid_device *hid) -{ - struct usb_device *dev = hid->dev; - struct hid_report *report; - struct hid_input *hidinput = NULL; - struct input_dev *input_dev; - int i, j, k; - - INIT_LIST_HEAD(&hid->inputs); - - for (i = 0; i < hid->maxcollection; i++) - if (hid->collection[i].type == HID_COLLECTION_APPLICATION || - hid->collection[i].type == HID_COLLECTION_PHYSICAL) - if (IS_INPUT_APPLICATION(hid->collection[i].usage)) - break; - - if (i == hid->maxcollection) - return -1; - - for (k = HID_INPUT_REPORT; k <= HID_OUTPUT_REPORT; k++) - list_for_each_entry(report, &hid->report_enum[k].report_list, list) { - - if (!report->maxfield) - continue; - - if (!hidinput) { - hidinput = kzalloc(sizeof(*hidinput), GFP_KERNEL); - input_dev = input_allocate_device(); - if (!hidinput || !input_dev) { - kfree(hidinput); - input_free_device(input_dev); - err("Out of memory during hid input probe"); - return -1; - } - - input_dev->private = hid; - input_dev->event = hidinput_input_event; - input_dev->open = hidinput_open; - input_dev->close = hidinput_close; - - input_dev->name = hid->name; - input_dev->phys = hid->phys; - input_dev->uniq = hid->uniq; - usb_to_input_id(dev, &input_dev->id); - input_dev->cdev.dev = &hid->intf->dev; - - hidinput->input = input_dev; - list_add_tail(&hidinput->list, &hid->inputs); - } - - for (i = 0; i < report->maxfield; i++) - for (j = 0; j < report->field[i]->maxusage; j++) - hidinput_configure_usage(hidinput, report->field[i], - report->field[i]->usage + j); - - if (hid->quirks & HID_QUIRK_MULTI_INPUT) { - /* This will leave hidinput NULL, so that it - * allocates another one if we have more inputs on - * the same interface. Some devices (e.g. Happ's - * UGCI) cram a lot of unrelated inputs into the - * same interface. */ - hidinput->report = report; - input_register_device(hidinput->input); - hidinput = NULL; - } - } - - /* This only gets called when we are a single-input (most of the - * time). IOW, not a HID_QUIRK_MULTI_INPUT. The hid_ff_init() is - * only useful in this case, and not for multi-input quirks. */ - if (hidinput) { - hid_ff_init(hid); - input_register_device(hidinput->input); - } - - return 0; -} - -void hidinput_disconnect(struct hid_device *hid) -{ - struct hid_input *hidinput, *next; - - list_for_each_entry_safe(hidinput, next, &hid->inputs, list) { - list_del(&hidinput->list); - input_unregister_device(hidinput->input); - kfree(hidinput); - } -} diff --git a/drivers/usb/input/hid-lgff.c b/drivers/usb/input/hid-lgff.c index 52be7a8f55a..4df0968f852 100644 --- a/drivers/usb/input/hid-lgff.c +++ b/drivers/usb/input/hid-lgff.c @@ -29,9 +29,10 @@ #include <linux/input.h> #include <linux/usb.h> -#include "hid.h" +#include <linux/hid.h> +#include "usbhid.h" -struct device_type { +struct dev_type { u16 idVendor; u16 idProduct; const signed short *ff; @@ -47,7 +48,7 @@ static const signed short ff_joystick[] = { -1 }; -static const struct device_type devices[] = { +static const struct dev_type devices[] = { { 0x046d, 0xc211, ff_rumble }, { 0x046d, 0xc219, ff_rumble }, { 0x046d, 0xc283, ff_joystick }, @@ -76,7 +77,7 @@ static int hid_lgff_play(struct input_dev *dev, void *data, struct ff_effect *ef report->field[0]->value[2] = x; report->field[0]->value[3] = y; dbg("(x, y)=(%04x, %04x)", x, y); - hid_submit_report(hid, report, USB_DIR_OUT); + usbhid_submit_report(hid, report, USB_DIR_OUT); break; case FF_RUMBLE: @@ -91,7 +92,7 @@ static int hid_lgff_play(struct input_dev *dev, void *data, struct ff_effect *ef report->field[0]->value[2] = left; report->field[0]->value[3] = right; dbg("(left, right)=(%04x, %04x)", left, right); - hid_submit_report(hid, report, USB_DIR_OUT); + usbhid_submit_report(hid, report, USB_DIR_OUT); break; } return 0; diff --git a/drivers/usb/input/hid-pidff.c b/drivers/usb/input/hid-pidff.c index 5420c13eb8e..cbd2d53feff 100644 --- a/drivers/usb/input/hid-pidff.c +++ b/drivers/usb/input/hid-pidff.c @@ -28,7 +28,9 @@ #include <linux/input.h> #include <linux/usb.h> -#include "hid.h" +#include <linux/hid.h> + +#include "usbhid.h" #define PID_EFFECTS_MAX 64 @@ -260,7 +262,7 @@ static void pidff_set_envelope_report(struct pidff_device *pidff, debug("attack %u => %d", envelope->attack_level, pidff->set_envelope[PID_ATTACK_LEVEL].value[0]); - hid_submit_report(pidff->hid, pidff->reports[PID_SET_ENVELOPE], + usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_ENVELOPE], USB_DIR_OUT); } @@ -287,7 +289,7 @@ static void pidff_set_constant_force_report(struct pidff_device *pidff, pidff_set_signed(&pidff->set_constant[PID_MAGNITUDE], effect->u.constant.level); - hid_submit_report(pidff->hid, pidff->reports[PID_SET_CONSTANT], + usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_CONSTANT], USB_DIR_OUT); } @@ -322,7 +324,7 @@ static void pidff_set_effect_report(struct pidff_device *pidff, pidff->effect_direction); pidff->set_effect[PID_START_DELAY].value[0] = effect->replay.delay; - hid_submit_report(pidff->hid, pidff->reports[PID_SET_EFFECT], + usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_EFFECT], USB_DIR_OUT); } @@ -354,7 +356,7 @@ static void pidff_set_periodic_report(struct pidff_device *pidff, pidff_set(&pidff->set_periodic[PID_PHASE], effect->u.periodic.phase); pidff->set_periodic[PID_PERIOD].value[0] = effect->u.periodic.period; - hid_submit_report(pidff->hid, pidff->reports[PID_SET_PERIODIC], + usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_PERIODIC], USB_DIR_OUT); } @@ -396,8 +398,8 @@ static void pidff_set_condition_report(struct pidff_device *pidff, effect->u.condition[i].left_saturation); pidff_set(&pidff->set_condition[PID_DEAD_BAND], effect->u.condition[i].deadband); - hid_wait_io(pidff->hid); - hid_submit_report(pidff->hid, pidff->reports[PID_SET_CONDITION], + usbhid_wait_io(pidff->hid); + usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_CONDITION], USB_DIR_OUT); } } @@ -438,7 +440,7 @@ static void pidff_set_ramp_force_report(struct pidff_device *pidff, effect->u.ramp.start_level); pidff_set_signed(&pidff->set_ramp[PID_RAMP_END], effect->u.ramp.end_level); - hid_submit_report(pidff->hid, pidff->reports[PID_SET_RAMP], + usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_RAMP], USB_DIR_OUT); } @@ -463,19 +465,19 @@ static int pidff_request_effect_upload(struct pidff_device *pidff, int efnum) int j; pidff->create_new_effect_type->value[0] = efnum; - hid_submit_report(pidff->hid, pidff->reports[PID_CREATE_NEW_EFFECT], + usbhid_submit_report(pidff->hid, pidff->reports[PID_CREATE_NEW_EFFECT], USB_DIR_OUT); debug("create_new_effect sent, type: %d", efnum); pidff->block_load[PID_EFFECT_BLOCK_INDEX].value[0] = 0; pidff->block_load_status->value[0] = 0; - hid_wait_io(pidff->hid); + usbhid_wait_io(pidff->hid); for (j = 0; j < 60; j++) { debug("pid_block_load requested"); - hid_submit_report(pidff->hid, pidff->reports[PID_BLOCK_LOAD], + usbhid_submit_report(pidff->hid, pidff->reports[PID_BLOCK_LOAD], USB_DIR_IN); - hid_wait_io(pidff->hid); + usbhid_wait_io(pidff->hid); if (pidff->block_load_status->value[0] == pidff->status_id[PID_BLOCK_LOAD_SUCCESS]) { debug("device reported free memory: %d bytes", @@ -511,8 +513,8 @@ static void pidff_playback_pid(struct pidff_device *pidff, int pid_id, int n) pidff->effect_operation[PID_LOOP_COUNT].value[0] = n; } - hid_wait_io(pidff->hid); - hid_submit_report(pidff->hid, pidff->reports[PID_EFFECT_OPERATION], + usbhid_wait_io(pidff->hid); + usbhid_submit_report(pidff->hid, pidff->reports[PID_EFFECT_OPERATION], USB_DIR_OUT); } @@ -534,7 +536,7 @@ static int pidff_playback(struct input_dev *dev, int effect_id, int value) static void pidff_erase_pid(struct pidff_device *pidff, int pid_id) { pidff->block_free[PID_EFFECT_BLOCK_INDEX].value[0] = pid_id; - hid_submit_report(pidff->hid, pidff->reports[PID_BLOCK_FREE], + usbhid_submit_report(pidff->hid, pidff->reports[PID_BLOCK_FREE], USB_DIR_OUT); } @@ -714,7 +716,7 @@ static void pidff_set_gain(struct input_dev *dev, u16 gain) struct pidff_device *pidff = dev->ff->private; pidff_set(&pidff->device_gain[PID_DEVICE_GAIN_FIELD], gain); - hid_submit_report(pidff->hid, pidff->reports[PID_DEVICE_GAIN], + usbhid_submit_report(pidff->hid, pidff->reports[PID_DEVICE_GAIN], USB_DIR_OUT); } @@ -739,7 +741,7 @@ static void pidff_autocenter(struct pidff_device *pidff, u16 magnitude) pidff_set(&pidff->set_effect[PID_GAIN], magnitude); pidff->set_effect[PID_START_DELAY].value[0] = 0; - hid_submit_report(pidff->hid, pidff->reports[PID_SET_EFFECT], + usbhid_submit_report(pidff->hid, pidff->reports[PID_SET_EFFECT], USB_DIR_OUT); } @@ -1163,19 +1165,19 @@ static void pidff_reset(struct pidff_device *pidff) pidff->device_control->value[0] = pidff->control_id[PID_RESET]; /* We reset twice as sometimes hid_wait_io isn't waiting long enough */ - hid_submit_report(hid, pidff->reports[PID_DEVICE_CONTROL], USB_DIR_OUT); - hid_wait_io(hid); - hid_submit_report(hid, pidff->reports[PID_DEVICE_CONTROL], USB_DIR_OUT); - hid_wait_io(hid); + usbhid_submit_report(hid, pidff->reports[PID_DEVICE_CONTROL], USB_DIR_OUT); + usbhid_wait_io(hid); + usbhid_submit_report(hid, pidff->reports[PID_DEVICE_CONTROL], USB_DIR_OUT); + usbhid_wait_io(hid); pidff->device_control->value[0] = pidff->control_id[PID_ENABLE_ACTUATORS]; - hid_submit_report(hid, pidff->reports[PID_DEVICE_CONTROL], USB_DIR_OUT); - hid_wait_io(hid); + usbhid_submit_report(hid, pidff->reports[PID_DEVICE_CONTROL], USB_DIR_OUT); + usbhid_wait_io(hid); /* pool report is sometimes messed up, refetch it */ - hid_submit_report(hid, pidff->reports[PID_POOL], USB_DIR_IN); - hid_wait_io(hid); + usbhid_submit_report(hid, pidff->reports[PID_POOL], USB_DIR_IN); + usbhid_wait_io(hid); if (pidff->pool[PID_SIMULTANEOUS_MAX].value) { int sim_effects = pidff->pool[PID_SIMULTANEOUS_MAX].value[0]; @@ -1187,9 +1189,9 @@ static void pidff_reset(struct pidff_device *pidff) break; } debug("pid_pool requested again"); - hid_submit_report(hid, pidff->reports[PID_POOL], + usbhid_submit_report(hid, pidff->reports[PID_POOL], USB_DIR_IN); - hid_wait_io(hid); + usbhid_wait_io(hid); } } } @@ -1275,7 +1277,7 @@ int hid_pidff_init(struct hid_device *hid) if (test_bit(FF_GAIN, dev->ffbit)) { pidff_set(&pidff->device_gain[PID_DEVICE_GAIN_FIELD], 0xffff); - hid_submit_report(pidff->hid, pidff->reports[PID_DEVICE_GAIN], + usbhid_submit_report(pidff->hid, pidff->reports[PID_DEVICE_GAIN], USB_DIR_OUT); } diff --git a/drivers/usb/input/hid-plff.c b/drivers/usb/input/hid-plff.c new file mode 100644 index 00000000000..76d2e6e14db --- /dev/null +++ b/drivers/usb/input/hid-plff.c @@ -0,0 +1,129 @@ +/* + * Force feedback support for PantherLord USB/PS2 2in1 Adapter devices + * + * Copyright (c) 2007 Anssi Hannula <anssi.hannula@gmail.com> + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + + +/* #define DEBUG */ + +#define debug(format, arg...) pr_debug("hid-plff: " format "\n" , ## arg) + +#include <linux/input.h> +#include <linux/usb.h> +#include <linux/hid.h> +#include "usbhid.h" + +struct plff_device { + struct hid_report *report; +}; + +static int hid_plff_play(struct input_dev *dev, void *data, + struct ff_effect *effect) +{ + struct hid_device *hid = dev->private; + struct plff_device *plff = data; + int left, right; + + left = effect->u.rumble.strong_magnitude; + right = effect->u.rumble.weak_magnitude; + debug("called with 0x%04x 0x%04x", left, right); + + left = left * 0x7f / 0xffff; + right = right * 0x7f / 0xffff; + + plff->report->field[0]->value[2] = left; + plff->report->field[0]->value[3] = right; + debug("running with 0x%02x 0x%02x", left, right); + usbhid_submit_report(hid, plff->report, USB_DIR_OUT); + + return 0; +} + +int hid_plff_init(struct hid_device *hid) +{ + struct plff_device *plff; + struct hid_report *report; + struct hid_input *hidinput; + struct list_head *report_list = + &hid->report_enum[HID_OUTPUT_REPORT].report_list; + struct list_head *report_ptr = report_list; + struct input_dev *dev; + int error; + + /* The device contains 2 output reports (one for each + HID_QUIRK_MULTI_INPUT device), both containing 1 field, which + contains 4 ff00.0002 usages and 4 16bit absolute values. + + The 2 input reports also contain a field which contains + 8 ff00.0001 usages and 8 boolean values. Their meaning is + currently unknown. */ + + if (list_empty(report_list)) { + printk(KERN_ERR "hid-plff: no output reports found\n"); + return -ENODEV; + } + + list_for_each_entry(hidinput, &hid->inputs, list) { + + report_ptr = report_ptr->next; + + if (report_ptr == report_list) { + printk(KERN_ERR "hid-plff: required output report is missing\n"); + return -ENODEV; + } + + report = list_entry(report_ptr, struct hid_report, list); + if (report->maxfield < 1) { + printk(KERN_ERR "hid-plff: no fields in the report\n"); + return -ENODEV; + } + + if (report->field[0]->report_count < 4) { + printk(KERN_ERR "hid-plff: not enough values in the field\n"); + return -ENODEV; + } + + plff = kzalloc(sizeof(struct plff_device), GFP_KERNEL); + if (!plff) + return -ENOMEM; + + dev = hidinput->input; + + set_bit(FF_RUMBLE, dev->ffbit); + + error = input_ff_create_memless(dev, plff, hid_plff_play); + if (error) { + kfree(plff); + return error; + } + + plff->report = report; + plff->report->field[0]->value[0] = 0x00; + plff->report->field[0]->value[1] = 0x00; + plff->report->field[0]->value[2] = 0x00; + plff->report->field[0]->value[3] = 0x00; + usbhid_submit_report(hid, plff->report, USB_DIR_OUT); + } + + printk(KERN_INFO "hid-plff: Force feedback for PantherLord USB/PS2 " + "2in1 Adapters by Anssi Hannula <anssi.hannula@gmail.com>\n"); + + return 0; +} diff --git a/drivers/usb/input/hid-tmff.c b/drivers/usb/input/hid-tmff.c index 2d5be4c318a..ab67331620d 100644 --- a/drivers/usb/input/hid-tmff.c +++ b/drivers/usb/input/hid-tmff.c @@ -32,7 +32,8 @@ #undef DEBUG #include <linux/usb.h> -#include "hid.h" +#include <linux/hid.h> +#include "usbhid.h" /* Usages for thrustmaster devices I know about */ #define THRUSTMASTER_USAGE_RUMBLE_LR (HID_UP_GENDESK | 0xbb) @@ -70,7 +71,7 @@ static int hid_tmff_play(struct input_dev *dev, void *data, struct ff_effect *ef tmff->rumble->value[0] = left; tmff->rumble->value[1] = right; dbg("(left,right)=(%08x, %08x)", left, right); - hid_submit_report(hid, tmff->report, USB_DIR_OUT); + usbhid_submit_report(hid, tmff->report, USB_DIR_OUT); return 0; } diff --git a/drivers/usb/input/hid-zpff.c b/drivers/usb/input/hid-zpff.c index d2ce3214572..7bd8238ca21 100644 --- a/drivers/usb/input/hid-zpff.c +++ b/drivers/usb/input/hid-zpff.c @@ -27,7 +27,8 @@ #include <linux/input.h> #include <linux/usb.h> -#include "hid.h" +#include <linux/hid.h> +#include "usbhid.h" struct zpff_device { struct hid_report *report; @@ -56,7 +57,7 @@ static int hid_zpff_play(struct input_dev *dev, void *data, zpff->report->field[2]->value[0] = left; zpff->report->field[3]->value[0] = right; debug("running with 0x%02x 0x%02x", left, right); - hid_submit_report(hid, zpff->report, USB_DIR_OUT); + usbhid_submit_report(hid, zpff->report, USB_DIR_OUT); return 0; } @@ -101,7 +102,7 @@ int hid_zpff_init(struct hid_device *hid) zpff->report->field[1]->value[0] = 0x02; zpff->report->field[2]->value[0] = 0x00; zpff->report->field[3]->value[0] = 0x00; - hid_submit_report(hid, zpff->report, USB_DIR_OUT); + usbhid_submit_report(hid, zpff->report, USB_DIR_OUT); printk(KERN_INFO "Force feedback for Zeroplus based devices by " "Anssi Hannula <anssi.hannula@gmail.com>\n"); diff --git a/drivers/usb/input/hid.h b/drivers/usb/input/hid.h deleted file mode 100644 index 76ad68d9edf..00000000000 --- a/drivers/usb/input/hid.h +++ /dev/null @@ -1,540 +0,0 @@ -#ifndef __HID_H -#define __HID_H - -/* - * $Id: hid.h,v 1.24 2001/12/27 10:37:41 vojtech Exp $ - * - * Copyright (c) 1999 Andreas Gal - * Copyright (c) 2000-2001 Vojtech Pavlik - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Should you need to contact me, the author, you can do so either by - * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail: - * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic - */ - -#include <linux/types.h> -#include <linux/slab.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/workqueue.h> - -/* - * USB HID (Human Interface Device) interface class code - */ - -#define USB_INTERFACE_CLASS_HID 3 - -/* - * USB HID interface subclass and protocol codes - */ - -#define USB_INTERFACE_SUBCLASS_BOOT 1 -#define USB_INTERFACE_PROTOCOL_KEYBOARD 1 -#define USB_INTERFACE_PROTOCOL_MOUSE 2 - -/* - * HID class requests - */ - -#define HID_REQ_GET_REPORT 0x01 -#define HID_REQ_GET_IDLE 0x02 -#define HID_REQ_GET_PROTOCOL 0x03 -#define HID_REQ_SET_REPORT 0x09 -#define HID_REQ_SET_IDLE 0x0A -#define HID_REQ_SET_PROTOCOL 0x0B - -/* - * HID class descriptor types - */ - -#define HID_DT_HID (USB_TYPE_CLASS | 0x01) -#define HID_DT_REPORT (USB_TYPE_CLASS | 0x02) -#define HID_DT_PHYSICAL (USB_TYPE_CLASS | 0x03) - -/* - * We parse each description item into this structure. Short items data - * values are expanded to 32-bit signed int, long items contain a pointer - * into the data area. - */ - -struct hid_item { - unsigned format; - __u8 size; - __u8 type; - __u8 tag; - union { - __u8 u8; - __s8 s8; - __u16 u16; - __s16 s16; - __u32 u32; - __s32 s32; - __u8 *longdata; - } data; -}; - -/* - * HID report item format - */ - -#define HID_ITEM_FORMAT_SHORT 0 -#define HID_ITEM_FORMAT_LONG 1 - -/* - * Special tag indicating long items - */ - -#define HID_ITEM_TAG_LONG 15 - -/* - * HID report descriptor item type (prefix bit 2,3) - */ - -#define HID_ITEM_TYPE_MAIN 0 -#define HID_ITEM_TYPE_GLOBAL 1 -#define HID_ITEM_TYPE_LOCAL 2 -#define HID_ITEM_TYPE_RESERVED 3 - -/* - * HID report descriptor main item tags - */ - -#define HID_MAIN_ITEM_TAG_INPUT 8 -#define HID_MAIN_ITEM_TAG_OUTPUT 9 -#define HID_MAIN_ITEM_TAG_FEATURE 11 -#define HID_MAIN_ITEM_TAG_BEGIN_COLLECTION 10 -#define HID_MAIN_ITEM_TAG_END_COLLECTION 12 - -/* - * HID report descriptor main item contents - */ - -#define HID_MAIN_ITEM_CONSTANT 0x001 -#define HID_MAIN_ITEM_VARIABLE 0x002 -#define HID_MAIN_ITEM_RELATIVE 0x004 -#define HID_MAIN_ITEM_WRAP 0x008 -#define HID_MAIN_ITEM_NONLINEAR 0x010 -#define HID_MAIN_ITEM_NO_PREFERRED 0x020 -#define HID_MAIN_ITEM_NULL_STATE 0x040 -#define HID_MAIN_ITEM_VOLATILE 0x080 -#define HID_MAIN_ITEM_BUFFERED_BYTE 0x100 - -/* - * HID report descriptor collection item types - */ - -#define HID_COLLECTION_PHYSICAL 0 -#define HID_COLLECTION_APPLICATION 1 -#define HID_COLLECTION_LOGICAL 2 - -/* - * HID report descriptor global item tags - */ - -#define HID_GLOBAL_ITEM_TAG_USAGE_PAGE 0 -#define HID_GLOBAL_ITEM_TAG_LOGICAL_MINIMUM 1 -#define HID_GLOBAL_ITEM_TAG_LOGICAL_MAXIMUM 2 -#define HID_GLOBAL_ITEM_TAG_PHYSICAL_MINIMUM 3 -#define HID_GLOBAL_ITEM_TAG_PHYSICAL_MAXIMUM 4 -#define HID_GLOBAL_ITEM_TAG_UNIT_EXPONENT 5 -#define HID_GLOBAL_ITEM_TAG_UNIT 6 -#define HID_GLOBAL_ITEM_TAG_REPORT_SIZE 7 -#define HID_GLOBAL_ITEM_TAG_REPORT_ID 8 -#define HID_GLOBAL_ITEM_TAG_REPORT_COUNT 9 -#define HID_GLOBAL_ITEM_TAG_PUSH 10 -#define HID_GLOBAL_ITEM_TAG_POP 11 - -/* - * HID report descriptor local item tags - */ - -#define HID_LOCAL_ITEM_TAG_USAGE 0 -#define HID_LOCAL_ITEM_TAG_USAGE_MINIMUM 1 -#define HID_LOCAL_ITEM_TAG_USAGE_MAXIMUM 2 -#define HID_LOCAL_ITEM_TAG_DESIGNATOR_INDEX 3 -#define HID_LOCAL_ITEM_TAG_DESIGNATOR_MINIMUM 4 -#define HID_LOCAL_ITEM_TAG_DESIGNATOR_MAXIMUM 5 -#define HID_LOCAL_ITEM_TAG_STRING_INDEX 7 -#define HID_LOCAL_ITEM_TAG_STRING_MINIMUM 8 -#define HID_LOCAL_ITEM_TAG_STRING_MAXIMUM 9 -#define HID_LOCAL_ITEM_TAG_DELIMITER 10 - -/* - * HID usage tables - */ - -#define HID_USAGE_PAGE 0xffff0000 - -#define HID_UP_UNDEFINED 0x00000000 -#define HID_UP_GENDESK 0x00010000 -#define HID_UP_SIMULATION 0x00020000 -#define HID_UP_KEYBOARD 0x00070000 -#define HID_UP_LED 0x00080000 -#define HID_UP_BUTTON 0x00090000 -#define HID_UP_ORDINAL 0x000a0000 -#define HID_UP_CONSUMER 0x000c0000 -#define HID_UP_DIGITIZER 0x000d0000 -#define HID_UP_PID 0x000f0000 -#define HID_UP_HPVENDOR 0xff7f0000 -#define HID_UP_MSVENDOR 0xff000000 -#define HID_UP_CUSTOM 0x00ff0000 -#define HID_UP_LOGIVENDOR 0xffbc0000 - -#define HID_USAGE 0x0000ffff - -#define HID_GD_POINTER 0x00010001 -#define HID_GD_MOUSE 0x00010002 -#define HID_GD_JOYSTICK 0x00010004 -#define HID_GD_GAMEPAD 0x00010005 -#define HID_GD_KEYBOARD 0x00010006 -#define HID_GD_KEYPAD 0x00010007 -#define HID_GD_MULTIAXIS 0x00010008 -#define HID_GD_X 0x00010030 -#define HID_GD_Y 0x00010031 -#define HID_GD_Z 0x00010032 -#define HID_GD_RX 0x00010033 -#define HID_GD_RY 0x00010034 -#define HID_GD_RZ 0x00010035 -#define HID_GD_SLIDER 0x00010036 -#define HID_GD_DIAL 0x00010037 -#define HID_GD_WHEEL 0x00010038 -#define HID_GD_HATSWITCH 0x00010039 -#define HID_GD_BUFFER 0x0001003a -#define HID_GD_BYTECOUNT 0x0001003b -#define HID_GD_MOTION 0x0001003c -#define HID_GD_START 0x0001003d -#define HID_GD_SELECT 0x0001003e -#define HID_GD_VX 0x00010040 -#define HID_GD_VY 0x00010041 -#define HID_GD_VZ 0x00010042 -#define HID_GD_VBRX 0x00010043 -#define HID_GD_VBRY 0x00010044 -#define HID_GD_VBRZ 0x00010045 -#define HID_GD_VNO 0x00010046 -#define HID_GD_FEATURE 0x00010047 -#define HID_GD_UP 0x00010090 -#define HID_GD_DOWN 0x00010091 -#define HID_GD_RIGHT 0x00010092 -#define HID_GD_LEFT 0x00010093 - -/* - * HID report types --- Ouch! HID spec says 1 2 3! - */ - -#define HID_INPUT_REPORT 0 -#define HID_OUTPUT_REPORT 1 -#define HID_FEATURE_REPORT 2 - -/* - * HID device quirks. - */ - -#define HID_QUIRK_INVERT 0x00000001 -#define HID_QUIRK_NOTOUCH 0x00000002 -#define HID_QUIRK_IGNORE 0x00000004 -#define HID_QUIRK_NOGET 0x00000008 -#define HID_QUIRK_HIDDEV 0x00000010 -#define HID_QUIRK_BADPAD 0x00000020 -#define HID_QUIRK_MULTI_INPUT 0x00000040 -#define HID_QUIRK_2WHEEL_MOUSE_HACK_7 0x00000080 -#define HID_QUIRK_2WHEEL_MOUSE_HACK_5 0x00000100 -#define HID_QUIRK_2WHEEL_MOUSE_HACK_ON 0x00000200 -#define HID_QUIRK_MIGHTYMOUSE 0x00000400 -#define HID_QUIRK_CYMOTION 0x00000800 -#define HID_QUIRK_POWERBOOK_HAS_FN 0x00001000 -#define HID_QUIRK_POWERBOOK_FN_ON 0x00002000 -#define HID_QUIRK_INVERT_HWHEEL 0x00004000 -#define HID_QUIRK_POWERBOOK_ISO_KEYBOARD 0x00008000 -#define HID_QUIRK_BAD_RELATIVE_KEYS 0x00010000 - -/* - * This is the global environment of the parser. This information is - * persistent for main-items. The global environment can be saved and - * restored with PUSH/POP statements. - */ - -struct hid_global { - unsigned usage_page; - __s32 logical_minimum; - __s32 logical_maximum; - __s32 physical_minimum; - __s32 physical_maximum; - __s32 unit_exponent; - unsigned unit; - unsigned report_id; - unsigned report_size; - unsigned report_count; -}; - -/* - * This is the local environment. It is persistent up the next main-item. - */ - -#define HID_MAX_DESCRIPTOR_SIZE 4096 -#define HID_MAX_USAGES 1024 -#define HID_DEFAULT_NUM_COLLECTIONS 16 - -struct hid_local { - unsigned usage[HID_MAX_USAGES]; /* usage array */ - unsigned collection_index[HID_MAX_USAGES]; /* collection index array */ - unsigned usage_index; - unsigned usage_minimum; - unsigned delimiter_depth; - unsigned delimiter_branch; -}; - -/* - * This is the collection stack. We climb up the stack to determine - * application and function of each field. - */ - -struct hid_collection { - unsigned type; - unsigned usage; - unsigned level; -}; - -struct hid_usage { - unsigned hid; /* hid usage code */ - unsigned collection_index; /* index into collection array */ - /* hidinput data */ - __u16 code; /* input driver code */ - __u8 type; /* input driver type */ - __s8 hat_min; /* hat switch fun */ - __s8 hat_max; /* ditto */ - __s8 hat_dir; /* ditto */ -}; - -struct hid_input; - -struct hid_field { - unsigned physical; /* physical usage for this field */ - unsigned logical; /* logical usage for this field */ - unsigned application; /* application usage for this field */ - struct hid_usage *usage; /* usage table for this function */ - unsigned maxusage; /* maximum usage index */ - unsigned flags; /* main-item flags (i.e. volatile,array,constant) */ - unsigned report_offset; /* bit offset in the report */ - unsigned report_size; /* size of this field in the report */ - unsigned report_count; /* number of this field in the report */ - unsigned report_type; /* (input,output,feature) */ - __s32 *value; /* last known value(s) */ - __s32 logical_minimum; - __s32 logical_maximum; - __s32 physical_minimum; - __s32 physical_maximum; - __s32 unit_exponent; - unsigned unit; - struct hid_report *report; /* associated report */ - unsigned index; /* index into report->field[] */ - /* hidinput data */ - struct hid_input *hidinput; /* associated input structure */ - __u16 dpad; /* dpad input code */ -}; - -#define HID_MAX_FIELDS 64 - -struct hid_report { - struct list_head list; - unsigned id; /* id of this report */ - unsigned type; /* report type */ - struct hid_field *field[HID_MAX_FIELDS]; /* fields of the report */ - unsigned maxfield; /* maximum valid field index */ - unsigned size; /* size of the report (bits) */ - struct hid_device *device; /* associated device */ -}; - -struct hid_report_enum { - unsigned numbered; - struct list_head report_list; - struct hid_report *report_id_hash[256]; -}; - -#define HID_REPORT_TYPES 3 - -#define HID_MIN_BUFFER_SIZE 64 /* make sure there is at least a packet size of space */ -#define HID_MAX_BUFFER_SIZE 4096 /* 4kb */ -#define HID_CONTROL_FIFO_SIZE 256 /* to init devices with >100 reports */ -#define HID_OUTPUT_FIFO_SIZE 64 - -struct hid_control_fifo { - unsigned char dir; - struct hid_report *report; -}; - -#define HID_CLAIMED_INPUT 1 -#define HID_CLAIMED_HIDDEV 2 - -#define HID_CTRL_RUNNING 1 -#define HID_OUT_RUNNING 2 -#define HID_IN_RUNNING 3 -#define HID_RESET_PENDING 4 -#define HID_SUSPENDED 5 -#define HID_CLEAR_HALT 6 - -struct hid_input { - struct list_head list; - struct hid_report *report; - struct input_dev *input; -}; - -struct hid_device { /* device report descriptor */ - __u8 *rdesc; - unsigned rsize; - struct hid_collection *collection; /* List of HID collections */ - unsigned collection_size; /* Number of allocated hid_collections */ - unsigned maxcollection; /* Number of parsed collections */ - unsigned maxapplication; /* Number of applications */ - unsigned version; /* HID version */ - unsigned country; /* HID country */ - struct hid_report_enum report_enum[HID_REPORT_TYPES]; - - struct usb_device *dev; /* USB device */ - struct usb_interface *intf; /* USB interface */ - int ifnum; /* USB interface number */ - - unsigned long iofl; /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */ - struct timer_list io_retry; /* Retry timer */ - unsigned long stop_retry; /* Time to give up, in jiffies */ - unsigned int retry_delay; /* Delay length in ms */ - struct work_struct reset_work; /* Task context for resets */ - - unsigned int bufsize; /* URB buffer size */ - - struct urb *urbin; /* Input URB */ - char *inbuf; /* Input buffer */ - dma_addr_t inbuf_dma; /* Input buffer dma */ - spinlock_t inlock; /* Input fifo spinlock */ - - struct urb *urbctrl; /* Control URB */ - struct usb_ctrlrequest *cr; /* Control request struct */ - dma_addr_t cr_dma; /* Control request struct dma */ - struct hid_control_fifo ctrl[HID_CONTROL_FIFO_SIZE]; /* Control fifo */ - unsigned char ctrlhead, ctrltail; /* Control fifo head & tail */ - char *ctrlbuf; /* Control buffer */ - dma_addr_t ctrlbuf_dma; /* Control buffer dma */ - spinlock_t ctrllock; /* Control fifo spinlock */ - - struct urb *urbout; /* Output URB */ - struct hid_report *out[HID_CONTROL_FIFO_SIZE]; /* Output pipe fifo */ - unsigned char outhead, outtail; /* Output pipe fifo head & tail */ - char *outbuf; /* Output buffer */ - dma_addr_t outbuf_dma; /* Output buffer dma */ - spinlock_t outlock; /* Output fifo spinlock */ - - unsigned claimed; /* Claimed by hidinput, hiddev? */ - unsigned quirks; /* Various quirks the device can pull on us */ - - struct list_head inputs; /* The list of inputs */ - void *hiddev; /* The hiddev structure */ - int minor; /* Hiddev minor number */ - - wait_queue_head_t wait; /* For sleeping */ - - int open; /* is the device open by anyone? */ - char name[128]; /* Device name */ - char phys[64]; /* Device physical location */ - char uniq[64]; /* Device unique identifier (serial #) */ - -#ifdef CONFIG_USB_HIDINPUT_POWERBOOK - unsigned long pb_pressed_fn[NBITS(KEY_MAX)]; - unsigned long pb_pressed_numlock[NBITS(KEY_MAX)]; -#endif -}; - -#define HID_GLOBAL_STACK_SIZE 4 -#define HID_COLLECTION_STACK_SIZE 4 - -struct hid_parser { - struct hid_global global; - struct hid_global global_stack[HID_GLOBAL_STACK_SIZE]; - unsigned global_stack_ptr; - struct hid_local local; - unsigned collection_stack[HID_COLLECTION_STACK_SIZE]; - unsigned collection_stack_ptr; - struct hid_device *device; -}; - -struct hid_class_descriptor { - __u8 bDescriptorType; - __u16 wDescriptorLength; -} __attribute__ ((packed)); - -struct hid_descriptor { - __u8 bLength; - __u8 bDescriptorType; - __u16 bcdHID; - __u8 bCountryCode; - __u8 bNumDescriptors; - - struct hid_class_descriptor desc[1]; -} __attribute__ ((packed)); - -#ifdef DEBUG -#include "hid-debug.h" -#else -#define hid_dump_input(a,b) do { } while (0) -#define hid_dump_device(c) do { } while (0) -#define hid_dump_field(a,b) do { } while (0) -#define resolv_usage(a) do { } while (0) -#define resolv_event(a,b) do { } while (0) -#endif - -#endif - -#ifdef CONFIG_USB_HIDINPUT -/* Applications from HID Usage Tables 4/8/99 Version 1.1 */ -/* We ignore a few input applications that are not widely used */ -#define IS_INPUT_APPLICATION(a) (((a >= 0x00010000) && (a <= 0x00010008)) || (a == 0x00010080) || (a == 0x000c0001)) -extern void hidinput_hid_event(struct hid_device *, struct hid_field *, struct hid_usage *, __s32); -extern void hidinput_report_event(struct hid_device *hid, struct hid_report *report); -extern int hidinput_connect(struct hid_device *); -extern void hidinput_disconnect(struct hid_device *); -#else -#define IS_INPUT_APPLICATION(a) (0) -static inline void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct hid_usage *usage, __s32 value) { } -static inline void hidinput_report_event(struct hid_device *hid, struct hid_report *report) { } -static inline int hidinput_connect(struct hid_device *hid) { return -ENODEV; } -static inline void hidinput_disconnect(struct hid_device *hid) { } -#endif - -int hid_open(struct hid_device *); -void hid_close(struct hid_device *); -int hid_set_field(struct hid_field *, unsigned, __s32); -void hid_submit_report(struct hid_device *, struct hid_report *, unsigned char dir); -void hid_init_reports(struct hid_device *hid); -int hid_wait_io(struct hid_device* hid); - - -#ifdef CONFIG_HID_FF -int hid_ff_init(struct hid_device *hid); - -int hid_lgff_init(struct hid_device *hid); -int hid_tmff_init(struct hid_device *hid); -int hid_zpff_init(struct hid_device *hid); -#ifdef CONFIG_HID_PID -int hid_pidff_init(struct hid_device *hid); -#else -static inline int hid_pidff_init(struct hid_device *hid) { return -ENODEV; } -#endif - -#else -static inline int hid_ff_init(struct hid_device *hid) { return -1; } -#endif - diff --git a/drivers/usb/input/hiddev.c b/drivers/usb/input/hiddev.c index 7dc14d0cacc..a8b3d66cd49 100644 --- a/drivers/usb/input/hiddev.c +++ b/drivers/usb/input/hiddev.c @@ -32,8 +32,9 @@ #include <linux/smp_lock.h> #include <linux/input.h> #include <linux/usb.h> -#include "hid.h" +#include <linux/hid.h> #include <linux/hiddev.h> +#include "usbhid.h" #ifdef CONFIG_USB_DYNAMIC_MINORS #define HIDDEV_MINOR_BASE 0 @@ -196,7 +197,7 @@ void hiddev_hid_event(struct hid_device *hid, struct hid_field *field, hiddev_send_event(hid, &uref); } - +EXPORT_SYMBOL_GPL(hiddev_hid_event); void hiddev_report_event(struct hid_device *hid, struct hid_report *report) { @@ -213,6 +214,7 @@ void hiddev_report_event(struct hid_device *hid, struct hid_report *report) hiddev_send_event(hid, &uref); } + /* * fasync file op */ @@ -239,7 +241,7 @@ static int hiddev_release(struct inode * inode, struct file * file) if (!--list->hiddev->open) { if (list->hiddev->exist) - hid_close(list->hiddev->hid); + usbhid_close(list->hiddev->hid); else kfree(list->hiddev); } @@ -270,7 +272,7 @@ static int hiddev_open(struct inode *inode, struct file *file) if (!list->hiddev->open++) if (list->hiddev->exist) - hid_open(hiddev_table[i]->hid); + usbhid_open(hiddev_table[i]->hid); return 0; } @@ -382,7 +384,7 @@ static int hiddev_ioctl(struct inode *inode, struct file *file, unsigned int cmd struct hiddev_list *list = file->private_data; struct hiddev *hiddev = list->hiddev; struct hid_device *hid = hiddev->hid; - struct usb_device *dev = hid->dev; + struct usb_device *dev = hid_to_usb_dev(hid); struct hiddev_collection_info cinfo; struct hiddev_report_info rinfo; struct hiddev_field_info finfo; @@ -391,6 +393,7 @@ static int hiddev_ioctl(struct inode *inode, struct file *file, unsigned int cmd struct hiddev_devinfo dinfo; struct hid_report *report; struct hid_field *field; + struct usbhid_device *usbhid = hid->driver_data; void __user *user_arg = (void __user *)arg; int i; @@ -420,7 +423,7 @@ static int hiddev_ioctl(struct inode *inode, struct file *file, unsigned int cmd dinfo.bustype = BUS_USB; dinfo.busnum = dev->bus->busnum; dinfo.devnum = dev->devnum; - dinfo.ifnum = hid->ifnum; + dinfo.ifnum = usbhid->ifnum; dinfo.vendor = le16_to_cpu(dev->descriptor.idVendor); dinfo.product = le16_to_cpu(dev->descriptor.idProduct); dinfo.version = le16_to_cpu(dev->descriptor.bcdDevice); @@ -479,7 +482,7 @@ static int hiddev_ioctl(struct inode *inode, struct file *file, unsigned int cmd } case HIDIOCINITREPORT: - hid_init_reports(hid); + usbhid_init_reports(hid); return 0; @@ -493,8 +496,8 @@ static int hiddev_ioctl(struct inode *inode, struct file *file, unsigned int cmd if ((report = hiddev_lookup_report(hid, &rinfo)) == NULL) return -EINVAL; - hid_submit_report(hid, report, USB_DIR_IN); - hid_wait_io(hid); + usbhid_submit_report(hid, report, USB_DIR_IN); + usbhid_wait_io(hid); return 0; @@ -508,8 +511,8 @@ static int hiddev_ioctl(struct inode *inode, struct file *file, unsigned int cmd if ((report = hiddev_lookup_report(hid, &rinfo)) == NULL) return -EINVAL; - hid_submit_report(hid, report, USB_DIR_OUT); - hid_wait_io(hid); + usbhid_submit_report(hid, report, USB_DIR_OUT); + usbhid_wait_io(hid); return 0; @@ -745,6 +748,7 @@ static struct usb_class_driver hiddev_class = { int hiddev_connect(struct hid_device *hid) { struct hiddev *hiddev; + struct usbhid_device *usbhid = hid->driver_data; int i; int retval; @@ -760,7 +764,7 @@ int hiddev_connect(struct hid_device *hid) if (!(hiddev = kzalloc(sizeof(struct hiddev), GFP_KERNEL))) return -1; - retval = usb_register_dev(hid->intf, &hiddev_class); + retval = usb_register_dev(usbhid->intf, &hiddev_class); if (retval) { err("Not able to get a minor for this device."); kfree(hiddev); @@ -772,10 +776,10 @@ int hiddev_connect(struct hid_device *hid) hiddev->hid = hid; hiddev->exist = 1; - hid->minor = hid->intf->minor; + hid->minor = usbhid->intf->minor; hid->hiddev = hiddev; - hiddev_table[hid->intf->minor - HIDDEV_MINOR_BASE] = hiddev; + hiddev_table[usbhid->intf->minor - HIDDEV_MINOR_BASE] = hiddev; return 0; } @@ -788,14 +792,15 @@ static struct usb_class_driver hiddev_class; void hiddev_disconnect(struct hid_device *hid) { struct hiddev *hiddev = hid->hiddev; + struct usbhid_device *usbhid = hid->driver_data; hiddev->exist = 0; hiddev_table[hiddev->hid->minor - HIDDEV_MINOR_BASE] = NULL; - usb_deregister_dev(hiddev->hid->intf, &hiddev_class); + usb_deregister_dev(usbhid->intf, &hiddev_class); if (hiddev->open) { - hid_close(hiddev->hid); + usbhid_close(hiddev->hid); wake_up_interruptible(&hiddev->wait); } else { kfree(hiddev); diff --git a/drivers/usb/input/usbhid.h b/drivers/usb/input/usbhid.h new file mode 100644 index 00000000000..0023f96d429 --- /dev/null +++ b/drivers/usb/input/usbhid.h @@ -0,0 +1,87 @@ +#ifndef __USBHID_H +#define __USBHID_H + +/* + * Copyright (c) 1999 Andreas Gal + * Copyright (c) 2000-2001 Vojtech Pavlik + * Copyright (c) 2006 Jiri Kosina + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/workqueue.h> +#include <linux/input.h> + +/* API provided by hid-core.c for USB HID drivers */ +int usbhid_wait_io(struct hid_device* hid); +void usbhid_close(struct hid_device *hid); +int usbhid_open(struct hid_device *hid); +void usbhid_init_reports(struct hid_device *hid); +void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, unsigned char dir); + +/* + * USB-specific HID struct, to be pointed to + * from struct hid_device->driver_data + */ + +struct usbhid_device { + struct hid_device *hid; /* pointer to corresponding HID dev */ + + struct usb_interface *intf; /* USB interface */ + int ifnum; /* USB interface number */ + + unsigned int bufsize; /* URB buffer size */ + + struct urb *urbin; /* Input URB */ + char *inbuf; /* Input buffer */ + dma_addr_t inbuf_dma; /* Input buffer dma */ + spinlock_t inlock; /* Input fifo spinlock */ + + struct urb *urbctrl; /* Control URB */ + struct usb_ctrlrequest *cr; /* Control request struct */ + dma_addr_t cr_dma; /* Control request struct dma */ + struct hid_control_fifo ctrl[HID_CONTROL_FIFO_SIZE]; /* Control fifo */ + unsigned char ctrlhead, ctrltail; /* Control fifo head & tail */ + char *ctrlbuf; /* Control buffer */ + dma_addr_t ctrlbuf_dma; /* Control buffer dma */ + spinlock_t ctrllock; /* Control fifo spinlock */ + + struct urb *urbout; /* Output URB */ + struct hid_report *out[HID_CONTROL_FIFO_SIZE]; /* Output pipe fifo */ + unsigned char outhead, outtail; /* Output pipe fifo head & tail */ + char *outbuf; /* Output buffer */ + dma_addr_t outbuf_dma; /* Output buffer dma */ + spinlock_t outlock; /* Output fifo spinlock */ + + unsigned long iofl; /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */ + struct timer_list io_retry; /* Retry timer */ + unsigned long stop_retry; /* Time to give up, in jiffies */ + unsigned int retry_delay; /* Delay length in ms */ + struct work_struct reset_work; /* Task context for resets */ + +}; + +#define hid_to_usb_dev(hid_dev) \ + container_of(hid_dev->dev->parent, struct usb_device, dev) + +#endif + diff --git a/drivers/usb/input/usbtouchscreen.c b/drivers/usb/input/usbtouchscreen.c index 7f3c57da9bc..86e37a20f8e 100644 --- a/drivers/usb/input/usbtouchscreen.c +++ b/drivers/usb/input/usbtouchscreen.c @@ -66,7 +66,7 @@ struct usbtouch_device_info { void (*process_pkt) (struct usbtouch_usb *usbtouch, unsigned char *pkt, int len); int (*get_pkt_len) (unsigned char *pkt, int len); - int (*read_data) (unsigned char *pkt, int *x, int *y, int *touch, int *press); + int (*read_data) (struct usbtouch_usb *usbtouch, unsigned char *pkt); int (*init) (struct usbtouch_usb *usbtouch); }; @@ -85,6 +85,9 @@ struct usbtouch_usb { struct usbtouch_device_info *type; char name[128]; char phys[64]; + + int x, y; + int touch, press; }; @@ -161,14 +164,14 @@ static struct usb_device_id usbtouch_devices[] = { #define EGALAX_PKT_TYPE_REPT 0x80 #define EGALAX_PKT_TYPE_DIAG 0x0A -static int egalax_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press) +static int egalax_read_data(struct usbtouch_usb *dev, unsigned char *pkt) { if ((pkt[0] & EGALAX_PKT_TYPE_MASK) != EGALAX_PKT_TYPE_REPT) return 0; - *x = ((pkt[3] & 0x0F) << 7) | (pkt[4] & 0x7F); - *y = ((pkt[1] & 0x0F) << 7) | (pkt[2] & 0x7F); - *touch = pkt[0] & 0x01; + dev->x = ((pkt[3] & 0x0F) << 7) | (pkt[4] & 0x7F); + dev->y = ((pkt[1] & 0x0F) << 7) | (pkt[2] & 0x7F); + dev->touch = pkt[0] & 0x01; return 1; } @@ -195,11 +198,11 @@ static int egalax_get_pkt_len(unsigned char *buf, int len) * PanJit Part */ #ifdef CONFIG_USB_TOUCHSCREEN_PANJIT -static int panjit_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press) +static int panjit_read_data(struct usbtouch_usb *dev, unsigned char *pkt) { - *x = ((pkt[2] & 0x0F) << 8) | pkt[1]; - *y = ((pkt[4] & 0x0F) << 8) | pkt[3]; - *touch = pkt[0] & 0x01; + dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1]; + dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3]; + dev->touch = pkt[0] & 0x01; return 1; } @@ -215,11 +218,11 @@ static int panjit_read_data(unsigned char *pkt, int *x, int *y, int *touch, int #define MTOUCHUSB_RESET 7 #define MTOUCHUSB_REQ_CTRLLR_ID 10 -static int mtouch_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press) +static int mtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt) { - *x = (pkt[8] << 8) | pkt[7]; - *y = (pkt[10] << 8) | pkt[9]; - *touch = (pkt[2] & 0x40) ? 1 : 0; + dev->x = (pkt[8] << 8) | pkt[7]; + dev->y = (pkt[10] << 8) | pkt[9]; + dev->touch = (pkt[2] & 0x40) ? 1 : 0; return 1; } @@ -260,14 +263,32 @@ static int mtouch_init(struct usbtouch_usb *usbtouch) * ITM Part */ #ifdef CONFIG_USB_TOUCHSCREEN_ITM -static int itm_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press) +static int itm_read_data(struct usbtouch_usb *dev, unsigned char *pkt) { - *x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F); - *y = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F); - *press = ((pkt[2] & 0x01) << 7) | (pkt[5] & 0x7F); - *touch = ~pkt[7] & 0x20; + int touch; + /* + * ITM devices report invalid x/y data if not touched. + * if the screen was touched before but is not touched any more + * report touch as 0 with the last valid x/y data once. then stop + * reporting data until touched again. + */ + dev->press = ((pkt[2] & 0x01) << 7) | (pkt[5] & 0x7F); + + touch = ~pkt[7] & 0x20; + if (!touch) { + if (dev->touch) { + dev->touch = 0; + return 1; + } - return *touch; + return 0; + } + + dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F); + dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F); + dev->touch = touch; + + return 1; } #endif @@ -276,7 +297,7 @@ static int itm_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *pr * eTurboTouch part */ #ifdef CONFIG_USB_TOUCHSCREEN_ETURBO -static int eturbo_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press) +static int eturbo_read_data(struct usbtouch_usb *dev, unsigned char *pkt) { unsigned int shift; @@ -285,9 +306,9 @@ static int eturbo_read_data(unsigned char *pkt, int *x, int *y, int *touch, int return 0; shift = (6 - (pkt[0] & 0x03)); - *x = ((pkt[3] << 7) | pkt[4]) >> shift; - *y = ((pkt[1] << 7) | pkt[2]) >> shift; - *touch = (pkt[0] & 0x10) ? 1 : 0; + dev->x = ((pkt[3] << 7) | pkt[4]) >> shift; + dev->y = ((pkt[1] << 7) | pkt[2]) >> shift; + dev->touch = (pkt[0] & 0x10) ? 1 : 0; return 1; } @@ -307,14 +328,14 @@ static int eturbo_get_pkt_len(unsigned char *buf, int len) * Gunze part */ #ifdef CONFIG_USB_TOUCHSCREEN_GUNZE -static int gunze_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press) +static int gunze_read_data(struct usbtouch_usb *dev, unsigned char *pkt) { if (!(pkt[0] & 0x80) || ((pkt[1] | pkt[2] | pkt[3]) & 0x80)) return 0; - *x = ((pkt[0] & 0x1F) << 7) | (pkt[2] & 0x7F); - *y = ((pkt[1] & 0x1F) << 7) | (pkt[3] & 0x7F); - *touch = pkt[0] & 0x20; + dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[2] & 0x7F); + dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[3] & 0x7F); + dev->touch = pkt[0] & 0x20; return 1; } @@ -383,11 +404,11 @@ static int dmc_tsc10_init(struct usbtouch_usb *usbtouch) } -static int dmc_tsc10_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press) +static int dmc_tsc10_read_data(struct usbtouch_usb *dev, unsigned char *pkt) { - *x = ((pkt[2] & 0x03) << 8) | pkt[1]; - *y = ((pkt[4] & 0x03) << 8) | pkt[3]; - *touch = pkt[0] & 0x01; + dev->x = ((pkt[2] & 0x03) << 8) | pkt[1]; + dev->y = ((pkt[4] & 0x03) << 8) | pkt[3]; + dev->touch = pkt[0] & 0x01; return 1; } @@ -492,23 +513,22 @@ static struct usbtouch_device_info usbtouch_dev_info[] = { static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch, unsigned char *pkt, int len) { - int x, y, touch, press; struct usbtouch_device_info *type = usbtouch->type; - if (!type->read_data(pkt, &x, &y, &touch, &press)) + if (!type->read_data(usbtouch, pkt)) return; - input_report_key(usbtouch->input, BTN_TOUCH, touch); + input_report_key(usbtouch->input, BTN_TOUCH, usbtouch->touch); if (swap_xy) { - input_report_abs(usbtouch->input, ABS_X, y); - input_report_abs(usbtouch->input, ABS_Y, x); + input_report_abs(usbtouch->input, ABS_X, usbtouch->y); + input_report_abs(usbtouch->input, ABS_Y, usbtouch->x); } else { - input_report_abs(usbtouch->input, ABS_X, x); - input_report_abs(usbtouch->input, ABS_Y, y); + input_report_abs(usbtouch->input, ABS_X, usbtouch->x); + input_report_abs(usbtouch->input, ABS_Y, usbtouch->y); } if (type->max_press) - input_report_abs(usbtouch->input, ABS_PRESSURE, press); + input_report_abs(usbtouch->input, ABS_PRESSURE, usbtouch->press); input_sync(usbtouch->input); } diff --git a/drivers/usb/input/wacom_sys.c b/drivers/usb/input/wacom_sys.c index e7cc20ab815..12b42746ded 100644 --- a/drivers/usb/input/wacom_sys.c +++ b/drivers/usb/input/wacom_sys.c @@ -159,13 +159,13 @@ void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER); input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3); - input_set_abs_params(input_dev, ABS_RX, 0, 4097, 0, 0); + input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0); } void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7); - input_set_abs_params(input_dev, ABS_RY, 0, 4097, 0, 0); + input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0); } void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac) diff --git a/drivers/usb/input/wacom_wac.c b/drivers/usb/input/wacom_wac.c index 92726fe8937..4142e36730f 100644 --- a/drivers/usb/input/wacom_wac.c +++ b/drivers/usb/input/wacom_wac.c @@ -209,13 +209,15 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo) wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02); wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x04); } - } - - if (data[1] & 0x10) wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */ + } else wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */ - wacom_report_key(wcombo, wacom->tool[0], data[1] & 0x10); + + if (data[1] & 0x10) /* only report prox-in when in area */ + wacom_report_key(wcombo, wacom->tool[0], 1); + if (!(data[1] & 0x90)) /* report prox-out when physically out */ + wacom_report_key(wcombo, wacom->tool[0], 0); wacom_input_sync(wcombo); /* send pad data */ @@ -405,7 +407,7 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo) if ((wacom->features->type == CINTIQ) && !(data[1] & 0x40)) return 0; - if (wacom->features->type >= INTUOS3) { + if (wacom->features->type >= INTUOS3S) { wacom_report_abs(wcombo, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1)); wacom_report_abs(wcombo, ABS_Y, (data[4] << 9) | (data[5] << 1) | (data[9] & 1)); wacom_report_abs(wcombo, ABS_DISTANCE, ((data[9] >> 2) & 0x3f)); @@ -423,7 +425,7 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo) if (data[1] & 0x02) { /* Rotation packet */ - if (wacom->features->type >= INTUOS3) { + if (wacom->features->type >= INTUOS3S) { /* I3 marker pen rotation reported as wheel * due to valuator limitation */ @@ -547,11 +549,11 @@ static struct wacom_features wacom_features[] = { { "Wacom Graphire3 6x8", 8, 16704, 12064, 511, 63, GRAPHIRE }, { "Wacom Graphire4 4x5", 8, 10208, 7424, 511, 63, WACOM_G4 }, { "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 63, WACOM_G4 }, - { "Wacom Volito", 8, 5104, 3712, 511, 0, GRAPHIRE }, - { "Wacom PenStation2", 8, 3250, 2320, 255, 0, GRAPHIRE }, - { "Wacom Volito2 4x5", 8, 5104, 3712, 511, 0, GRAPHIRE }, - { "Wacom Volito2 2x3", 8, 3248, 2320, 511, 0, GRAPHIRE }, - { "Wacom PenPartner2", 8, 3250, 2320, 255, 0, GRAPHIRE }, + { "Wacom Volito", 8, 5104, 3712, 511, 63, GRAPHIRE }, + { "Wacom PenStation2", 8, 3250, 2320, 255, 63, GRAPHIRE }, + { "Wacom Volito2 4x5", 8, 5104, 3712, 511, 63, GRAPHIRE }, + { "Wacom Volito2 2x3", 8, 3248, 2320, 511, 63, GRAPHIRE }, + { "Wacom PenPartner2", 8, 3250, 2320, 255, 63, GRAPHIRE }, { "Wacom Intuos 4x5", 10, 12700, 10600, 1023, 63, INTUOS }, { "Wacom Intuos 6x8", 10, 20320, 16240, 1023, 63, INTUOS }, { "Wacom Intuos 9x12", 10, 30480, 24060, 1023, 63, INTUOS }, @@ -580,7 +582,7 @@ static struct wacom_features wacom_features[] = { { "Wacom Intuos3 12x12", 10, 60960, 60960, 1023, 63, INTUOS3L }, { "Wacom Intuos3 12x19", 10, 97536, 60960, 1023, 63, INTUOS3L }, { "Wacom Intuos3 6x11", 10, 54204, 31750, 1023, 63, INTUOS3 }, - { "Wacom Intuos3 4x6", 10, 31496, 19685, 1023, 15, INTUOS3S }, + { "Wacom Intuos3 4x6", 10, 31496, 19685, 1023, 63, INTUOS3S }, { "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 63, CINTIQ }, { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 63, INTUOS }, { } |